linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yue Haibing <yuehaibing@huawei.com>
To: <dmitry.torokhov@gmail.com>, <sudip@vectorindia.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-input@vger.kernel.org>,
	YueHaibing <yuehaibing@huawei.com>
Subject: [PATCH] Input: walkera0701 - Fix possible NULL pointer dereference in walkera0701_detach
Date: Tue, 23 Apr 2019 22:56:37 +0800	[thread overview]
Message-ID: <20190423145637.35004-1-yuehaibing@huawei.com> (raw)

From: YueHaibing <yuehaibing@huawei.com>

KASAN report this:

walkera0701: failed to allocate input device
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN PTI
CPU: 1 PID: 5324 Comm: syz-executor.0 Tainted: G         C        5.1.0-rc3+ #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:input_unregister_device+0x21/0xe0 drivers/input/input.c:2192
Code: 2e 0f 1f 84 00 00 00 00 00 53 48 89 fb e8 07 41 f6 fe 48 8d bb 20 07 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 84 c0 0f 8e 92 00 00 00 80 bb 20 07 00 00
RSP: 0018:ffff8881f58dfd30 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff82460ca9
RDX: 00000000000000e4 RSI: ffffc900013d3000 RDI: 0000000000000720
RBP: 0000000000000000 R08: ffffed103d30caf7 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000
R13: ffffffffc1633000 R14: ffffffffc086b320 R15: 1ffff1103eb1bfaf
FS:  00007fa407200700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b33924000 CR3: 00000001e270c006 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 walkera0701_detach+0x8e/0xba [walkera0701]
 port_detach+0x73/0x90 [parport]
 bus_for_each_dev+0x154/0x1e0 drivers/base/bus.c:304
 parport_unregister_driver+0x1f8/0x270 [parport]
 __do_sys_delete_module kernel/module.c:1018 [inline]
 __se_sys_delete_module kernel/module.c:961 [inline]
 __x64_sys_delete_module+0x30c/0x480 kernel/module.c:961
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fa4071ffc58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fa4072006bc
R13: 00000000004bcca9 R14: 00000000006f6b48 R15: 00000000ffffffff
Modules linked in: walkera0701(-) tps65090_regulator intel_th mptbase adm1031 snd_soc_wm8753 snd_soc_core snd_pcm_dmaengine snd_pcm ac97_bus snd_compress rtc_ds1286 snd_seq_dummy snd_seq snd_timer snd_seq_device snd soundcore comedi(C) i2c_mux_ltc4306 i2c_mux max14577_regulator max14577 usbcore hid cmac mc13783_regulator mc13xxx_regulator_core mc13xxx_core of_mdio fixed_phy libphy iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic aesni_intel aes_x86_64 piix crypto_simd cryptd input_leds ide_core psmouse glue_helper intel_agp serio_raw intel_gtt ata_generic agpgart i2c_piix4
 pata_acpi parport_pc parport floppy rtc_cmos sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: walkera0701]
Dumping ftrace buffer:
   (ftrace buffer empty)
---[ end trace 17f6dd401f34af3e ]---

In walkera0701_attach(), if input_allocate_device failed,
w->input_dev is set to NULL. But in walkera0701_detach it
is not checked while passing to input_unregister_device(),
this will trigger a NULL pointer dereference issue.

There is also another possible use-after-free issue, when
input_register_device() fails, input_free_device be
called to free input dev, then in walkera0701_detach()
calling input_unregister_device will trigger use-after-free
while accessing input dev

This patch set w->parport to NULL on walkera0701_attach failed,
and only do detach in case attach success.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 221bcb24c653 ("Input: walkera0701 - use parallel port device model")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
---
 drivers/input/joystick/walkera0701.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/input/joystick/walkera0701.c b/drivers/input/joystick/walkera0701.c
index dce313d..852b8c5 100644
--- a/drivers/input/joystick/walkera0701.c
+++ b/drivers/input/joystick/walkera0701.c
@@ -207,13 +207,13 @@ static void walkera0701_attach(struct parport *pp)
 
 	if (pp->number != walkera0701_pp_no) {
 		pr_debug("Not using parport%d.\n", pp->number);
-		return;
+		goto err_out;
 	}
 
 	if (pp->irq == -1) {
 		pr_err("parport %d does not have interrupt assigned\n",
 			pp->number);
-		return;
+		goto err_out;
 	}
 
 	w->parport = pp;
@@ -228,7 +228,7 @@ static void walkera0701_attach(struct parport *pp)
 
 	if (!w->pardevice) {
 		pr_err("failed to register parport device\n");
-		return;
+		goto err_out;
 	}
 
 	if (parport_negotiate(w->pardevice->port, IEEE1284_MODE_COMPAT)) {
@@ -279,13 +279,15 @@ static void walkera0701_attach(struct parport *pp)
 	input_free_device(w->input_dev);
 err_unregister_device:
 	parport_unregister_device(w->pardevice);
+err_out:
+	w->parport = NULL;
 }
 
 static void walkera0701_detach(struct parport *port)
 {
 	struct walkera_dev *w = &w_dev;
 
-	if (!w->pardevice || w->parport->number != port->number)
+	if (!w->parport)
 		return;
 
 	input_unregister_device(w->input_dev);
-- 
2.7.0



             reply	other threads:[~2019-04-23 14:58 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-23 14:56 Yue Haibing [this message]
2019-05-17  2:38 ` [PATCH] Input: walkera0701 - Fix possible NULL pointer dereference in walkera0701_detach YueHaibing
2019-10-16 15:29 ` Sudip Mukherjee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190423145637.35004-1-yuehaibing@huawei.com \
    --to=yuehaibing@huawei.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sudip@vectorindia.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).