* [PATCH v2 0/4] Add QCS404 interconnect provider driver
@ 2019-04-15 10:43 Georgi Djakov
2019-04-15 10:43 ` [PATCH v2 1/4] dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings Georgi Djakov
` (3 more replies)
0 siblings, 4 replies; 9+ messages in thread
From: Georgi Djakov @ 2019-04-15 10:43 UTC (permalink / raw)
To: robh+dt, bjorn.andersson, georgi.djakov
Cc: vkoul, evgreen, daidavid1, linux-pm, devicetree, linux-kernel,
linux-arm-msm
Add driver to support scaling of the on-chip interconnects on QCS404-based
platforms. Also add the necessary device-tree nodes, so that the driver for
each NoC can probe and register as interconnect-provider.
v2:
- Use the clk_bulk API. (Bjorn)
- Move the port IDs into the provider file. (Bjorn)
- Use ARRAY_SIZE in the macro to automagically count the num_links. (Bjorn)
- Improve code readability. (Bjorn)
- Add patch [4/4] introducing a qcom,qos DT property to represent the link to
the MMIO QoS registers HW block.
v1: https://lore.kernel.org/lkml/20190405035446.31886-1-georgi.djakov@linaro.org/
Bjorn Andersson (1):
interconnect: qcom: Add QCS404 interconnect provider driver
Georgi Djakov (3):
dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings
arm64: dts: qcs404: Add interconnect provider DT nodes
dt-bindings: interconnect: qcs404: Introduce qcom,qos DT property
.../bindings/interconnect/qcom,qcs404.txt | 76 +++
arch/arm64/boot/dts/qcom/qcs404.dtsi | 25 +
drivers/interconnect/qcom/Kconfig | 8 +
drivers/interconnect/qcom/Makefile | 2 +
drivers/interconnect/qcom/qcs404.c | 559 ++++++++++++++++++
.../dt-bindings/interconnect/qcom,qcs404.h | 88 +++
6 files changed, 758 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
create mode 100644 drivers/interconnect/qcom/qcs404.c
create mode 100644 include/dt-bindings/interconnect/qcom,qcs404.h
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2 1/4] dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings
2019-04-15 10:43 [PATCH v2 0/4] Add QCS404 interconnect provider driver Georgi Djakov
@ 2019-04-15 10:43 ` Georgi Djakov
2019-04-29 22:16 ` Rob Herring
2019-04-15 10:43 ` [PATCH v2 2/4] interconnect: qcom: Add QCS404 interconnect provider driver Georgi Djakov
` (2 subsequent siblings)
3 siblings, 1 reply; 9+ messages in thread
From: Georgi Djakov @ 2019-04-15 10:43 UTC (permalink / raw)
To: robh+dt, bjorn.andersson, georgi.djakov
Cc: vkoul, evgreen, daidavid1, linux-pm, devicetree, linux-kernel,
linux-arm-msm
The Qualcomm QCS404 platform has several buses that could be controlled
and tuned according to the bandwidth demand.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
v2:
- No changes.
.../bindings/interconnect/qcom,qcs404.txt | 45 +++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
new file mode 100644
index 000000000000..9befcd14a5b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
@@ -0,0 +1,45 @@
+Qualcomm QCS404 Network-On-Chip interconnect driver binding
+-----------------------------------------------------------
+
+Required properties :
+- compatible : shall contain only one of the following:
+ "qcom,qcs404-bimc"
+ "qcom,qcs404-pcnoc"
+ "qcom,qcs404-snoc"
+- #interconnect-cells : should contain 1
+
+Optional properties :
+clocks : list of phandles and specifiers to all interconnect bus clocks
+clock-names : clock names should include both "bus_clk" and "bus_a_clk"
+
+Example:
+
+rpm-glink {
+ ...
+ rpm_requests: glink-channel {
+ ...
+ bimc: interconnect@0 {
+ compatible = "qcom,qcs404-bimc";
+ #interconnect-cells = <1>;
+ clock-names = "bus_clk", "bus_a_clk";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ };
+
+ pnoc: interconnect@1 {
+ compatible = "qcom,qcs404-pcnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus_clk", "bus_a_clk";
+ clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+ <&rpmcc RPM_SMD_PNOC_A_CLK>;
+ };
+
+ snoc: interconnect@2 {
+ compatible = "qcom,qcs404-snoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus_clk", "bus_a_clk";
+ clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ };
+ };
+};
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 2/4] interconnect: qcom: Add QCS404 interconnect provider driver
2019-04-15 10:43 [PATCH v2 0/4] Add QCS404 interconnect provider driver Georgi Djakov
2019-04-15 10:43 ` [PATCH v2 1/4] dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings Georgi Djakov
@ 2019-04-15 10:43 ` Georgi Djakov
2019-04-18 23:02 ` Bjorn Andersson
2019-04-15 10:43 ` [PATCH v2 3/4] arm64: dts: qcs404: Add interconnect provider DT nodes Georgi Djakov
2019-04-15 10:43 ` [PATCH v2 4/4] dt-bindings: interconnect: qcs404: Introduce qcom,qos DT property Georgi Djakov
3 siblings, 1 reply; 9+ messages in thread
From: Georgi Djakov @ 2019-04-15 10:43 UTC (permalink / raw)
To: robh+dt, bjorn.andersson, georgi.djakov
Cc: vkoul, evgreen, daidavid1, linux-pm, devicetree, linux-kernel,
linux-arm-msm
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Add driver for the interconnect buses found in Qualcomm QCS404-based
platforms. The topology consists of three NoCs that are controlled by
a remote processor that collects the aggregated bandwidth for each
master-slave pairs.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
v2:
- Use the clk_bulk API. (Bjorn)
- Move the port IDs into the provider file. (Bjorn)
- Use ARRAY_SIZE in the macro to automagically count the num_links. (Bjorn)
- Improve code readability. (Bjorn)
drivers/interconnect/qcom/Kconfig | 8 +
drivers/interconnect/qcom/Makefile | 2 +
drivers/interconnect/qcom/qcs404.c | 559 ++++++++++++++++++
.../dt-bindings/interconnect/qcom,qcs404.h | 88 +++
4 files changed, 657 insertions(+)
create mode 100644 drivers/interconnect/qcom/qcs404.c
create mode 100644 include/dt-bindings/interconnect/qcom,qcs404.h
diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
index 290d330abe5a..cf9e6d430994 100644
--- a/drivers/interconnect/qcom/Kconfig
+++ b/drivers/interconnect/qcom/Kconfig
@@ -4,6 +4,14 @@ config INTERCONNECT_QCOM
help
Support for Qualcomm's Network-on-Chip interconnect hardware.
+config INTERCONNECT_QCOM_QCS404
+ tristate "Qualcomm QCS404 interconnect driver"
+ depends on INTERCONNECT_QCOM
+ depends on QCOM_SMD_RPM || COMPILE_TEST
+ help
+ This is a driver for the Qualcomm Network-on-Chip on qcs404-based
+ platforms.
+
config INTERCONNECT_QCOM_SDM845
tristate "Qualcomm SDM845 interconnect driver"
depends on INTERCONNECT_QCOM
diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile
index 1c1cea690f92..059ff325ee6c 100644
--- a/drivers/interconnect/qcom/Makefile
+++ b/drivers/interconnect/qcom/Makefile
@@ -1,5 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
+qnoc-qcs404-objs := qcs404.o
qnoc-sdm845-objs := sdm845.o
+obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o
obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o
diff --git a/drivers/interconnect/qcom/qcs404.c b/drivers/interconnect/qcom/qcs404.c
new file mode 100644
index 000000000000..592bcfcb0621
--- /dev/null
+++ b/drivers/interconnect/qcom/qcs404.c
@@ -0,0 +1,559 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Linaro Ltd
+ */
+
+#include <dt-bindings/interconnect/qcom,qcs404.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/interconnect-provider.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/soc/qcom/smd-rpm.h>
+
+#define QCS404_MASTER_AMPSS_M0 0
+#define QCS404_MASTER_GRAPHICS_3D 1
+#define QCS404_MASTER_MDP_PORT0 2
+#define QCS404_SNOC_BIMC_1_MAS 3
+#define QCS404_MASTER_TCU_0 4
+#define QCS404_MASTER_SPDM 5
+#define QCS404_MASTER_BLSP_1 6
+#define QCS404_MASTER_BLSP_2 7
+#define QCS404_MASTER_XM_USB_HS1 8
+#define QCS404_MASTER_CRYPTO_CORE0 9
+#define QCS404_MASTER_SDCC_1 10
+#define QCS404_MASTER_SDCC_2 11
+#define QCS404_SNOC_PNOC_MAS 12
+#define QCS404_MASTER_QPIC 13
+#define QCS404_MASTER_QDSS_BAM 14
+#define QCS404_BIMC_SNOC_MAS 15
+#define QCS404_PNOC_SNOC_MAS 16
+#define QCS404_MASTER_QDSS_ETR 17
+#define QCS404_MASTER_EMAC 18
+#define QCS404_MASTER_PCIE 19
+#define QCS404_MASTER_USB3 20
+#define QCS404_PNOC_INT_0 21
+#define QCS404_PNOC_INT_2 22
+#define QCS404_PNOC_INT_3 23
+#define QCS404_PNOC_SLV_0 24
+#define QCS404_PNOC_SLV_1 25
+#define QCS404_PNOC_SLV_2 26
+#define QCS404_PNOC_SLV_3 27
+#define QCS404_PNOC_SLV_4 28
+#define QCS404_PNOC_SLV_6 29
+#define QCS404_PNOC_SLV_7 30
+#define QCS404_PNOC_SLV_8 31
+#define QCS404_PNOC_SLV_9 32
+#define QCS404_PNOC_SLV_10 33
+#define QCS404_PNOC_SLV_11 34
+#define QCS404_SNOC_QDSS_INT 35
+#define QCS404_SNOC_INT_0 36
+#define QCS404_SNOC_INT_1 37
+#define QCS404_SNOC_INT_2 38
+#define QCS404_SLAVE_EBI_CH0 39
+#define QCS404_BIMC_SNOC_SLV 40
+#define QCS404_SLAVE_SPDM_WRAPPER 41
+#define QCS404_SLAVE_PDM 42
+#define QCS404_SLAVE_PRNG 43
+#define QCS404_SLAVE_TCSR 44
+#define QCS404_SLAVE_SNOC_CFG 45
+#define QCS404_SLAVE_MESSAGE_RAM 46
+#define QCS404_SLAVE_DISPLAY_CFG 47
+#define QCS404_SLAVE_GRAPHICS_3D_CFG 48
+#define QCS404_SLAVE_BLSP_1 49
+#define QCS404_SLAVE_TLMM_NORTH 50
+#define QCS404_SLAVE_PCIE_1 51
+#define QCS404_SLAVE_EMAC_CFG 52
+#define QCS404_SLAVE_BLSP_2 53
+#define QCS404_SLAVE_TLMM_EAST 54
+#define QCS404_SLAVE_TCU 55
+#define QCS404_SLAVE_PMIC_ARB 56
+#define QCS404_SLAVE_SDCC_1 57
+#define QCS404_SLAVE_SDCC_2 58
+#define QCS404_SLAVE_TLMM_SOUTH 59
+#define QCS404_SLAVE_USB_HS 60
+#define QCS404_SLAVE_USB3 61
+#define QCS404_SLAVE_CRYPTO_0_CFG 62
+#define QCS404_PNOC_SNOC_SLV 63
+#define QCS404_SLAVE_APPSS 64
+#define QCS404_SLAVE_WCSS 65
+#define QCS404_SNOC_BIMC_1_SLV 66
+#define QCS404_SLAVE_OCIMEM 67
+#define QCS404_SNOC_PNOC_SLV 68
+#define QCS404_SLAVE_QDSS_STM 69
+#define QCS404_SLAVE_CATS_128 70
+#define QCS404_SLAVE_OCMEM_64 71
+#define QCS404_SLAVE_LPASS 72
+
+#define RPM_BUS_MASTER_REQ 0x73616d62
+#define RPM_BUS_SLAVE_REQ 0x766c7362
+#define RPM_KEY_BW 0x00007762
+
+#define to_qcom_provider(_provider) \
+ container_of(_provider, struct qcom_icc_provider, provider)
+
+static struct qcom_smd_rpm *rpm;
+
+struct icc_rpm_smd_req {
+ __le32 key;
+ __le32 nbytes;
+ __le32 value;
+};
+
+static const struct clk_bulk_data bus_clocks[] = {
+ { .id = "bus_clk" },
+ { .id = "bus_a_clk" },
+};
+
+/**
+ * struct qcom_icc_provider - Qualcomm specific interconnect provider
+ * @provider: generic interconnect provider
+ * @bus_clks: the clk_bulk_data table of bus clocks
+ * @num_clks: the total number of clk_bulk_data entries
+ */
+struct qcom_icc_provider {
+ struct icc_provider provider;
+ struct clk_bulk_data *bus_clks;
+ int num_clks;
+};
+
+#define QCS404_MAX_LINKS 12
+
+/**
+ * struct qcom_icc_node - Qualcomm specific interconnect nodes
+ * @name: the node name used in debugfs
+ * @id: a unique node identifier
+ * @links: an array of nodes where we can go next while traversing
+ * @num_links: the total number of @links
+ * @buswidth: width of the interconnect between a node and the bus (bytes)
+ * @mas_rpm_id: RPM id for devices that are bus masters
+ * @slv_rpm_id: RPM id for devices that are bus slaves
+ * @rate: current bus clock rate in Hz
+ */
+struct qcom_icc_node {
+ unsigned char *name;
+ u16 id;
+ u16 links[QCS404_MAX_LINKS];
+ u16 num_links;
+ u16 buswidth;
+ int mas_rpm_id;
+ int slv_rpm_id;
+ u64 rate;
+};
+
+struct qcom_icc_desc {
+ struct qcom_icc_node **nodes;
+ size_t num_nodes;
+};
+
+#define DEFINE_QNODE(_name, _id, _buswidth, _mas_rpm_id, _slv_rpm_id, \
+ ...) \
+ static struct qcom_icc_node _name = { \
+ .name = #_name, \
+ .id = _id, \
+ .buswidth = _buswidth, \
+ .mas_rpm_id = _mas_rpm_id, \
+ .slv_rpm_id = _slv_rpm_id, \
+ .num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })), \
+ .links = { __VA_ARGS__ }, \
+ }
+
+DEFINE_QNODE(mas_apps_proc, QCS404_MASTER_AMPSS_M0, 8, 0, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV);
+DEFINE_QNODE(mas_oxili, QCS404_MASTER_GRAPHICS_3D, 8, 6, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV);
+DEFINE_QNODE(mas_mdp, QCS404_MASTER_MDP_PORT0, 8, 8, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV);
+DEFINE_QNODE(mas_snoc_bimc_1, QCS404_SNOC_BIMC_1_MAS, 8, 76, -1, QCS404_SLAVE_EBI_CH0);
+DEFINE_QNODE(mas_tcu_0, QCS404_MASTER_TCU_0, 8, -1, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV);
+DEFINE_QNODE(mas_spdm, QCS404_MASTER_SPDM, 4, -1, -1, QCS404_PNOC_INT_3);
+DEFINE_QNODE(mas_blsp_1, QCS404_MASTER_BLSP_1, 4, 41, -1, QCS404_PNOC_INT_3);
+DEFINE_QNODE(mas_blsp_2, QCS404_MASTER_BLSP_2, 4, 39, -1, QCS404_PNOC_INT_3);
+DEFINE_QNODE(mas_xi_usb_hs1, QCS404_MASTER_XM_USB_HS1, 8, 138, -1, QCS404_PNOC_INT_0);
+DEFINE_QNODE(mas_crypto, QCS404_MASTER_CRYPTO_CORE0, 8, 23, -1, QCS404_PNOC_SNOC_SLV, QCS404_PNOC_INT_2);
+DEFINE_QNODE(mas_sdcc_1, QCS404_MASTER_SDCC_1, 8, 33, -1, QCS404_PNOC_INT_0);
+DEFINE_QNODE(mas_sdcc_2, QCS404_MASTER_SDCC_2, 8, 35, -1, QCS404_PNOC_INT_0);
+DEFINE_QNODE(mas_snoc_pcnoc, QCS404_SNOC_PNOC_MAS, 8, 77, -1, QCS404_PNOC_INT_2);
+DEFINE_QNODE(mas_qpic, QCS404_MASTER_QPIC, 4, -1, -1, QCS404_PNOC_INT_0);
+DEFINE_QNODE(mas_qdss_bam, QCS404_MASTER_QDSS_BAM, 4, -1, -1, QCS404_SNOC_QDSS_INT);
+DEFINE_QNODE(mas_bimc_snoc, QCS404_BIMC_SNOC_MAS, 8, 21, -1, QCS404_SLAVE_OCMEM_64, QCS404_SLAVE_CATS_128, QCS404_SNOC_INT_0, QCS404_SNOC_INT_1);
+DEFINE_QNODE(mas_pcnoc_snoc, QCS404_PNOC_SNOC_MAS, 8, 29, -1, QCS404_SNOC_BIMC_1_SLV, QCS404_SNOC_INT_2, QCS404_SNOC_INT_0);
+DEFINE_QNODE(mas_qdss_etr, QCS404_MASTER_QDSS_ETR, 8, -1, -1, QCS404_SNOC_QDSS_INT);
+DEFINE_QNODE(mas_emac, QCS404_MASTER_EMAC, 8, -1, -1, QCS404_SNOC_BIMC_1_SLV, QCS404_SNOC_INT_1);
+DEFINE_QNODE(mas_pcie, QCS404_MASTER_PCIE, 8, -1, -1, QCS404_SNOC_BIMC_1_SLV, QCS404_SNOC_INT_1);
+DEFINE_QNODE(mas_usb3, QCS404_MASTER_USB3, 8, -1, -1, QCS404_SNOC_BIMC_1_SLV, QCS404_SNOC_INT_1);
+DEFINE_QNODE(pcnoc_int_0, QCS404_PNOC_INT_0, 8, 85, 114, QCS404_PNOC_SNOC_SLV, QCS404_PNOC_INT_2);
+DEFINE_QNODE(pcnoc_int_2, QCS404_PNOC_INT_2, 8, 124, 184, QCS404_PNOC_SLV_10, QCS404_SLAVE_TCU, QCS404_PNOC_SLV_11, QCS404_PNOC_SLV_2, QCS404_PNOC_SLV_3, QCS404_PNOC_SLV_0, QCS404_PNOC_SLV_1, QCS404_PNOC_SLV_6, QCS404_PNOC_SLV_7, QCS404_PNOC_SLV_4, QCS404_PNOC_SLV_8, QCS404_PNOC_SLV_9);
+DEFINE_QNODE(pcnoc_int_3, QCS404_PNOC_INT_3, 8, 125, 185, QCS404_PNOC_SNOC_SLV);
+DEFINE_QNODE(pcnoc_s_0, QCS404_PNOC_SLV_0, 4, 89, 118, QCS404_SLAVE_PRNG, QCS404_SLAVE_SPDM_WRAPPER, QCS404_SLAVE_PDM);
+DEFINE_QNODE(pcnoc_s_1, QCS404_PNOC_SLV_1, 4, 90, 119, QCS404_SLAVE_TCSR);
+DEFINE_QNODE(pcnoc_s_2, QCS404_PNOC_SLV_2, 4, -1, -1, QCS404_SLAVE_GRAPHICS_3D_CFG);
+DEFINE_QNODE(pcnoc_s_3, QCS404_PNOC_SLV_3, 4, 92, 121, QCS404_SLAVE_MESSAGE_RAM);
+DEFINE_QNODE(pcnoc_s_4, QCS404_PNOC_SLV_4, 4, 93, 122, QCS404_SLAVE_SNOC_CFG);
+DEFINE_QNODE(pcnoc_s_6, QCS404_PNOC_SLV_6, 4, 94, 123, QCS404_SLAVE_BLSP_1, QCS404_SLAVE_TLMM_NORTH, QCS404_SLAVE_EMAC_CFG);
+DEFINE_QNODE(pcnoc_s_7, QCS404_PNOC_SLV_7, 4, 95, 124, QCS404_SLAVE_TLMM_SOUTH, QCS404_SLAVE_DISPLAY_CFG, QCS404_SLAVE_SDCC_1, QCS404_SLAVE_PCIE_1, QCS404_SLAVE_SDCC_2);
+DEFINE_QNODE(pcnoc_s_8, QCS404_PNOC_SLV_8, 4, 96, 125, QCS404_SLAVE_CRYPTO_0_CFG);
+DEFINE_QNODE(pcnoc_s_9, QCS404_PNOC_SLV_9, 4, 97, 126, QCS404_SLAVE_BLSP_2, QCS404_SLAVE_TLMM_EAST, QCS404_SLAVE_PMIC_ARB);
+DEFINE_QNODE(pcnoc_s_10, QCS404_PNOC_SLV_10, 4, 157, -1, QCS404_SLAVE_USB_HS);
+DEFINE_QNODE(pcnoc_s_11, QCS404_PNOC_SLV_11, 4, 158, 246, QCS404_SLAVE_USB3);
+DEFINE_QNODE(qdss_int, QCS404_SNOC_QDSS_INT, 8, -1, -1, QCS404_SNOC_BIMC_1_SLV, QCS404_SNOC_INT_1);
+DEFINE_QNODE(snoc_int_0, QCS404_SNOC_INT_0, 8, 99, 130, QCS404_SLAVE_LPASS, QCS404_SLAVE_APPSS, QCS404_SLAVE_WCSS);
+DEFINE_QNODE(snoc_int_1, QCS404_SNOC_INT_1, 8, 100, 131, QCS404_SNOC_PNOC_SLV, QCS404_SNOC_INT_2);
+DEFINE_QNODE(snoc_int_2, QCS404_SNOC_INT_2, 8, 134, 197, QCS404_SLAVE_QDSS_STM, QCS404_SLAVE_OCIMEM);
+DEFINE_QNODE(slv_ebi, QCS404_SLAVE_EBI_CH0, 8, -1, 0, 0);
+DEFINE_QNODE(slv_bimc_snoc, QCS404_BIMC_SNOC_SLV, 8, -1, 2, QCS404_BIMC_SNOC_MAS);
+DEFINE_QNODE(slv_spdm, QCS404_SLAVE_SPDM_WRAPPER, 4, -1, -1, 0);
+DEFINE_QNODE(slv_pdm, QCS404_SLAVE_PDM, 4, -1, 41, 0);
+DEFINE_QNODE(slv_prng, QCS404_SLAVE_PRNG, 4, -1, 44, 0);
+DEFINE_QNODE(slv_tcsr, QCS404_SLAVE_TCSR, 4, -1, 50, 0);
+DEFINE_QNODE(slv_snoc_cfg, QCS404_SLAVE_SNOC_CFG, 4, -1, 70, 0);
+DEFINE_QNODE(slv_message_ram, QCS404_SLAVE_MESSAGE_RAM, 4, -1, 55, 0);
+DEFINE_QNODE(slv_disp_ss_cfg, QCS404_SLAVE_DISPLAY_CFG, 4, -1, -1, 0);
+DEFINE_QNODE(slv_gpu_cfg, QCS404_SLAVE_GRAPHICS_3D_CFG, 4, -1, -1, 0);
+DEFINE_QNODE(slv_blsp_1, QCS404_SLAVE_BLSP_1, 4, -1, 39, 0);
+DEFINE_QNODE(slv_tlmm_north, QCS404_SLAVE_TLMM_NORTH, 4, -1, 214, 0);
+DEFINE_QNODE(slv_pcie, QCS404_SLAVE_PCIE_1, 4, -1, -1, 0);
+DEFINE_QNODE(slv_ethernet, QCS404_SLAVE_EMAC_CFG, 4, -1, -1, 0);
+DEFINE_QNODE(slv_blsp_2, QCS404_SLAVE_BLSP_2, 4, -1, 37, 0);
+DEFINE_QNODE(slv_tlmm_east, QCS404_SLAVE_TLMM_EAST, 4, -1, 213, 0);
+DEFINE_QNODE(slv_tcu, QCS404_SLAVE_TCU, 8, -1, -1, 0);
+DEFINE_QNODE(slv_pmic_arb, QCS404_SLAVE_PMIC_ARB, 4, -1, 59, 0);
+DEFINE_QNODE(slv_sdcc_1, QCS404_SLAVE_SDCC_1, 4, -1, 31, 0);
+DEFINE_QNODE(slv_sdcc_2, QCS404_SLAVE_SDCC_2, 4, -1, 33, 0);
+DEFINE_QNODE(slv_tlmm_south, QCS404_SLAVE_TLMM_SOUTH, 4, -1, -1, 0);
+DEFINE_QNODE(slv_usb_hs, QCS404_SLAVE_USB_HS, 4, -1, 40, 0);
+DEFINE_QNODE(slv_usb3, QCS404_SLAVE_USB3, 4, -1, 22, 0);
+DEFINE_QNODE(slv_crypto_0_cfg, QCS404_SLAVE_CRYPTO_0_CFG, 4, -1, 52, 0);
+DEFINE_QNODE(slv_pcnoc_snoc, QCS404_PNOC_SNOC_SLV, 8, -1, 45, QCS404_PNOC_SNOC_MAS);
+DEFINE_QNODE(slv_kpss_ahb, QCS404_SLAVE_APPSS, 4, -1, -1, 0);
+DEFINE_QNODE(slv_wcss, QCS404_SLAVE_WCSS, 4, -1, 23, 0);
+DEFINE_QNODE(slv_snoc_bimc_1, QCS404_SNOC_BIMC_1_SLV, 8, -1, 104, QCS404_SNOC_BIMC_1_MAS);
+DEFINE_QNODE(slv_imem, QCS404_SLAVE_OCIMEM, 8, -1, 26, 0);
+DEFINE_QNODE(slv_snoc_pcnoc, QCS404_SNOC_PNOC_SLV, 8, -1, 28, QCS404_SNOC_PNOC_MAS);
+DEFINE_QNODE(slv_qdss_stm, QCS404_SLAVE_QDSS_STM, 4, -1, 30, 0);
+DEFINE_QNODE(slv_cats_0, QCS404_SLAVE_CATS_128, 16, -1, -1, 0);
+DEFINE_QNODE(slv_cats_1, QCS404_SLAVE_OCMEM_64, 8, -1, -1, 0);
+DEFINE_QNODE(slv_lpass, QCS404_SLAVE_LPASS, 4, -1, -1, 0);
+
+static struct qcom_icc_node *qcs404_bimc_nodes[] = {
+ [MASTER_AMPSS_M0] = &mas_apps_proc,
+ [MASTER_OXILI] = &mas_oxili,
+ [MASTER_MDP_PORT0] = &mas_mdp,
+ [MASTER_SNOC_BIMC_1] = &mas_snoc_bimc_1,
+ [MASTER_TCU_0] = &mas_tcu_0,
+ [SLAVE_EBI_CH0] = &slv_ebi,
+ [SLAVE_BIMC_SNOC] = &slv_bimc_snoc,
+};
+
+static struct qcom_icc_desc qcs404_bimc = {
+ .nodes = qcs404_bimc_nodes,
+ .num_nodes = ARRAY_SIZE(qcs404_bimc_nodes),
+};
+
+static struct qcom_icc_node *qcs404_pcnoc_nodes[] = {
+ [MASTER_SPDM] = &mas_spdm,
+ [MASTER_BLSP_1] = &mas_blsp_1,
+ [MASTER_BLSP_2] = &mas_blsp_2,
+ [MASTER_XI_USB_HS1] = &mas_xi_usb_hs1,
+ [MASTER_CRYPT0] = &mas_crypto,
+ [MASTER_SDCC_1] = &mas_sdcc_1,
+ [MASTER_SDCC_2] = &mas_sdcc_2,
+ [MASTER_SNOC_PCNOC] = &mas_snoc_pcnoc,
+ [MASTER_QPIC] = &mas_qpic,
+ [PCNOC_INT_0] = &pcnoc_int_0,
+ [PCNOC_INT_2] = &pcnoc_int_2,
+ [PCNOC_INT_3] = &pcnoc_int_3,
+ [PCNOC_S_0] = &pcnoc_s_0,
+ [PCNOC_S_1] = &pcnoc_s_1,
+ [PCNOC_S_2] = &pcnoc_s_2,
+ [PCNOC_S_3] = &pcnoc_s_3,
+ [PCNOC_S_4] = &pcnoc_s_4,
+ [PCNOC_S_6] = &pcnoc_s_6,
+ [PCNOC_S_7] = &pcnoc_s_7,
+ [PCNOC_S_8] = &pcnoc_s_8,
+ [PCNOC_S_9] = &pcnoc_s_9,
+ [PCNOC_S_10] = &pcnoc_s_10,
+ [PCNOC_S_11] = &pcnoc_s_11,
+ [SLAVE_SPDM] = &slv_spdm,
+ [SLAVE_PDM] = &slv_pdm,
+ [SLAVE_PRNG] = &slv_prng,
+ [SLAVE_TCSR] = &slv_tcsr,
+ [SLAVE_SNOC_CFG] = &slv_snoc_cfg,
+ [SLAVE_MESSAGE_RAM] = &slv_message_ram,
+ [SLAVE_DISP_SS_CFG] = &slv_disp_ss_cfg,
+ [SLAVE_GPU_CFG] = &slv_gpu_cfg,
+ [SLAVE_BLSP_1] = &slv_blsp_1,
+ [SLAVE_BLSP_2] = &slv_blsp_2,
+ [SLAVE_TLMM_NORTH] = &slv_tlmm_north,
+ [SLAVE_PCIE] = &slv_pcie,
+ [SLAVE_ETHERNET] = &slv_ethernet,
+ [SLAVE_TLMM_EAST] = &slv_tlmm_east,
+ [SLAVE_TCU] = &slv_tcu,
+ [SLAVE_PMIC_ARB] = &slv_pmic_arb,
+ [SLAVE_SDCC_1] = &slv_sdcc_1,
+ [SLAVE_SDCC_2] = &slv_sdcc_2,
+ [SLAVE_TLMM_SOUTH] = &slv_tlmm_south,
+ [SLAVE_USB_HS] = &slv_usb_hs,
+ [SLAVE_USB3] = &slv_usb3,
+ [SLAVE_CRYPTO_0_CFG] = &slv_crypto_0_cfg,
+ [SLAVE_PCNOC_SNOC] = &slv_pcnoc_snoc,
+};
+
+static struct qcom_icc_desc qcs404_pcnoc = {
+ .nodes = qcs404_pcnoc_nodes,
+ .num_nodes = ARRAY_SIZE(qcs404_pcnoc_nodes),
+};
+
+static struct qcom_icc_node *qcs404_snoc_nodes[] = {
+ [MASTER_QDSS_BAM] = &mas_qdss_bam,
+ [MASTER_BIMC_SNOC] = &mas_bimc_snoc,
+ [MASTER_PCNOC_SNOC] = &mas_pcnoc_snoc,
+ [MASTER_QDSS_ETR] = &mas_qdss_etr,
+ [MASTER_EMAC] = &mas_emac,
+ [MASTER_PCIE] = &mas_pcie,
+ [MASTER_USB3] = &mas_usb3,
+ [QDSS_INT] = &qdss_int,
+ [SNOC_INT_0] = &snoc_int_0,
+ [SNOC_INT_1] = &snoc_int_1,
+ [SNOC_INT_2] = &snoc_int_2,
+ [SLAVE_KPSS_AHB] = &slv_kpss_ahb,
+ [SLAVE_WCSS] = &slv_wcss,
+ [SLAVE_SNOC_BIMC_1] = &slv_snoc_bimc_1,
+ [SLAVE_IMEM] = &slv_imem,
+ [SLAVE_SNOC_PCNOC] = &slv_snoc_pcnoc,
+ [SLAVE_QDSS_STM] = &slv_qdss_stm,
+ [SLAVE_CATS_0] = &slv_cats_0,
+ [SLAVE_CATS_1] = &slv_cats_1,
+ [SLAVE_LPASS] = &slv_lpass,
+};
+
+static struct qcom_icc_desc qcs404_snoc = {
+ .nodes = qcs404_snoc_nodes,
+ .num_nodes = ARRAY_SIZE(qcs404_snoc_nodes),
+};
+
+static int qcom_icc_aggregate(struct icc_node *node, u32 avg_bw, u32 peak_bw,
+ u32 *agg_avg, u32 *agg_peak)
+{
+ *agg_avg += avg_bw;
+ *agg_peak = max(*agg_peak, peak_bw);
+
+ return 0;
+}
+
+static int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val)
+{
+ struct icc_rpm_smd_req req = {
+ .key = cpu_to_le32(RPM_KEY_BW),
+ .nbytes = cpu_to_le32(sizeof(u32)),
+ .value = cpu_to_le32(val),
+ };
+
+ return qcom_rpm_smd_write(rpm, ctx, rsc_type, id, &req,
+ sizeof(req));
+}
+
+static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
+{
+ struct qcom_icc_provider *qp;
+ struct qcom_icc_node *qn;
+ struct icc_provider *provider;
+ struct icc_node *n;
+ u64 sum_bw;
+ u64 max_peak_bw;
+ u64 rate;
+ u32 agg_avg = 0;
+ u32 agg_peak = 0;
+ int ret, i;
+
+ qn = src->data;
+ provider = src->provider;
+ qp = to_qcom_provider(provider);
+
+ list_for_each_entry(n, &provider->nodes, node_list)
+ qcom_icc_aggregate(n, n->avg_bw, n->peak_bw,
+ &agg_avg, &agg_peak);
+
+ sum_bw = icc_units_to_bps(agg_avg);
+ max_peak_bw = icc_units_to_bps(agg_peak);
+
+ /* send bandwidth request message to the RPM processor */
+ if (qn->mas_rpm_id != -1) {
+ ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
+ RPM_BUS_MASTER_REQ,
+ qn->mas_rpm_id,
+ sum_bw);
+ if (ret) {
+ pr_err("qcom_icc_rpm_smd_send mas %d error %d\n",
+ qn->mas_rpm_id, ret);
+ return ret;
+ }
+ }
+
+ if (qn->slv_rpm_id != -1) {
+ ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
+ RPM_BUS_SLAVE_REQ,
+ qn->slv_rpm_id,
+ sum_bw);
+ if (ret) {
+ pr_err("qcom_icc_rpm_smd_send slv error %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ rate = max(sum_bw, max_peak_bw);
+
+ do_div(rate, qn->buswidth);
+
+ if (qn->rate == rate)
+ return 0;
+
+ for (i = 0; i < qp->num_clks; i++) {
+ ret = clk_set_rate(qp->bus_clks[i].clk, rate);
+ if (ret) {
+ pr_err("%s clk_set_rate error: %d\n",
+ qp->bus_clks[i].id, ret);
+ return ret;
+ }
+ }
+
+ qn->rate = rate;
+
+ return 0;
+}
+
+static int qnoc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct qcom_icc_desc *desc;
+ struct icc_onecell_data *data;
+ struct icc_provider *provider;
+ struct qcom_icc_node **qnodes;
+ struct qcom_icc_provider *qp;
+ struct icc_node *node;
+ size_t num_nodes, i;
+ int ret;
+
+ rpm = dev_get_drvdata(dev->parent);
+ if (!rpm) {
+ dev_err(dev, "unable to retrieve handle to RPM\n");
+ return -ENODEV;
+ }
+
+ desc = of_device_get_match_data(dev);
+ if (!desc)
+ return -EINVAL;
+
+ qnodes = desc->nodes;
+ num_nodes = desc->num_nodes;
+
+ qp = devm_kzalloc(dev, sizeof(*qp), GFP_KERNEL);
+ if (!qp)
+ return -ENOMEM;
+
+ data = devm_kcalloc(dev, num_nodes, sizeof(*node), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ qp->bus_clks = devm_kmemdup(dev, bus_clocks, sizeof(bus_clocks),
+ GFP_KERNEL);
+ if (!qp->bus_clks)
+ return -ENOMEM;
+
+ qp->num_clks = ARRAY_SIZE(bus_clocks);
+ ret = devm_clk_bulk_get(dev, qp->num_clks, qp->bus_clks);
+ if (ret)
+ return ret;
+
+ ret = clk_bulk_prepare_enable(qp->num_clks, qp->bus_clks);
+ if (ret)
+ return ret;
+
+ provider = &qp->provider;
+ INIT_LIST_HEAD(&provider->nodes);
+ provider->dev = dev;
+ provider->set = qcom_icc_set;
+ provider->aggregate = qcom_icc_aggregate;
+ provider->xlate = of_icc_xlate_onecell;
+ provider->data = data;
+
+ ret = icc_provider_add(provider);
+ if (ret) {
+ dev_err(dev, "error adding interconnect provider: %d\n", ret);
+ clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
+ return ret;
+ }
+
+ for (i = 0; i < num_nodes; i++) {
+ size_t j;
+
+ node = icc_node_create(qnodes[i]->id);
+ if (IS_ERR(node)) {
+ ret = PTR_ERR(node);
+ goto err;
+ }
+
+ node->name = qnodes[i]->name;
+ node->data = qnodes[i];
+ icc_node_add(node, provider);
+
+ dev_dbg(dev, "registered node %s\n", node->name);
+
+ /* populate links */
+ for (j = 0; j < qnodes[i]->num_links; j++)
+ icc_link_create(node, qnodes[i]->links[j]);
+
+ data->nodes[i] = node;
+ }
+ data->num_nodes = num_nodes;
+
+ platform_set_drvdata(pdev, qp);
+
+ return 0;
+err:
+ list_for_each_entry(node, &provider->nodes, node_list) {
+ icc_node_del(node);
+ icc_node_destroy(node->id);
+ }
+ clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
+ icc_provider_del(provider);
+
+ return ret;
+}
+
+static int qnoc_remove(struct platform_device *pdev)
+{
+ struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
+ struct icc_provider *provider = &qp->provider;
+ struct icc_node *n;
+
+ list_for_each_entry(n, &provider->nodes, node_list) {
+ icc_node_del(n);
+ icc_node_destroy(n->id);
+ }
+ clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
+
+ return icc_provider_del(provider);
+}
+
+static const struct of_device_id qcs404_noc_of_match[] = {
+ { .compatible = "qcom,qcs404-bimc", .data = &qcs404_bimc },
+ { .compatible = "qcom,qcs404-pcnoc", .data = &qcs404_pcnoc },
+ { .compatible = "qcom,qcs404-snoc", .data = &qcs404_snoc },
+ { },
+};
+MODULE_DEVICE_TABLE(of, qcs404_noc_of_match);
+
+static struct platform_driver qnoc_driver = {
+ .probe = qnoc_probe,
+ .remove = qnoc_remove,
+ .driver = {
+ .name = "qnoc-qcs404",
+ .of_match_table = qcs404_noc_of_match,
+ },
+};
+module_platform_driver(qnoc_driver);
+MODULE_DESCRIPTION("Qualcomm QCS404 NoC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/dt-bindings/interconnect/qcom,qcs404.h b/include/dt-bindings/interconnect/qcom,qcs404.h
new file mode 100644
index 000000000000..960f6e39c5f2
--- /dev/null
+++ b/include/dt-bindings/interconnect/qcom,qcs404.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Qualcomm interconnect IDs
+ *
+ * Copyright (c) 2019, Linaro Ltd.
+ * Author: Georgi Djakov <georgi.djakov@linaro.org>
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_QCS404_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_QCS404_H
+
+#define MASTER_AMPSS_M0 0
+#define MASTER_OXILI 1
+#define MASTER_MDP_PORT0 2
+#define MASTER_SNOC_BIMC_1 3
+#define MASTER_TCU_0 4
+#define SLAVE_EBI_CH0 5
+#define SLAVE_BIMC_SNOC 6
+
+#define MASTER_SPDM 0
+#define MASTER_BLSP_1 1
+#define MASTER_BLSP_2 2
+#define MASTER_XI_USB_HS1 3
+#define MASTER_CRYPT0 4
+#define MASTER_SDCC_1 5
+#define MASTER_SDCC_2 6
+#define MASTER_SNOC_PCNOC 7
+#define MASTER_QPIC 8
+#define PCNOC_INT_0 9
+#define PCNOC_INT_2 10
+#define PCNOC_INT_3 11
+#define PCNOC_S_0 12
+#define PCNOC_S_1 13
+#define PCNOC_S_2 14
+#define PCNOC_S_3 15
+#define PCNOC_S_4 16
+#define PCNOC_S_6 17
+#define PCNOC_S_7 18
+#define PCNOC_S_8 19
+#define PCNOC_S_9 20
+#define PCNOC_S_10 21
+#define PCNOC_S_11 22
+#define SLAVE_SPDM 23
+#define SLAVE_PDM 24
+#define SLAVE_PRNG 25
+#define SLAVE_TCSR 26
+#define SLAVE_SNOC_CFG 27
+#define SLAVE_MESSAGE_RAM 28
+#define SLAVE_DISP_SS_CFG 29
+#define SLAVE_GPU_CFG 30
+#define SLAVE_BLSP_1 31
+#define SLAVE_BLSP_2 32
+#define SLAVE_TLMM_NORTH 33
+#define SLAVE_PCIE 34
+#define SLAVE_ETHERNET 35
+#define SLAVE_TLMM_EAST 36
+#define SLAVE_TCU 37
+#define SLAVE_PMIC_ARB 38
+#define SLAVE_SDCC_1 39
+#define SLAVE_SDCC_2 40
+#define SLAVE_TLMM_SOUTH 41
+#define SLAVE_USB_HS 42
+#define SLAVE_USB3 43
+#define SLAVE_CRYPTO_0_CFG 44
+#define SLAVE_PCNOC_SNOC 45
+
+#define MASTER_QDSS_BAM 0
+#define MASTER_BIMC_SNOC 1
+#define MASTER_PCNOC_SNOC 2
+#define MASTER_QDSS_ETR 3
+#define MASTER_EMAC 4
+#define MASTER_PCIE 5
+#define MASTER_USB3 6
+#define QDSS_INT 7
+#define SNOC_INT_0 8
+#define SNOC_INT_1 9
+#define SNOC_INT_2 10
+#define SLAVE_KPSS_AHB 11
+#define SLAVE_WCSS 12
+#define SLAVE_SNOC_BIMC_1 13
+#define SLAVE_IMEM 14
+#define SLAVE_SNOC_PCNOC 15
+#define SLAVE_QDSS_STM 16
+#define SLAVE_CATS_0 17
+#define SLAVE_CATS_1 18
+#define SLAVE_LPASS 19
+
+#endif
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 3/4] arm64: dts: qcs404: Add interconnect provider DT nodes
2019-04-15 10:43 [PATCH v2 0/4] Add QCS404 interconnect provider driver Georgi Djakov
2019-04-15 10:43 ` [PATCH v2 1/4] dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings Georgi Djakov
2019-04-15 10:43 ` [PATCH v2 2/4] interconnect: qcom: Add QCS404 interconnect provider driver Georgi Djakov
@ 2019-04-15 10:43 ` Georgi Djakov
2019-04-15 10:43 ` [PATCH v2 4/4] dt-bindings: interconnect: qcs404: Introduce qcom,qos DT property Georgi Djakov
3 siblings, 0 replies; 9+ messages in thread
From: Georgi Djakov @ 2019-04-15 10:43 UTC (permalink / raw)
To: robh+dt, bjorn.andersson, georgi.djakov
Cc: vkoul, evgreen, daidavid1, linux-pm, devicetree, linux-kernel,
linux-arm-msm
Add the DT nodes for the network-on-chip interconnect buses found
on qcs404-based platforms.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
v2:
- No changes.
arch/arm64/boot/dts/qcom/qcs404.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index e8fd26633d57..706e918f79f6 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2018, Linaro Limited
+#include <dt-bindings/interconnect/qcom,qcs404.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-qcs404.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
@@ -226,6 +227,30 @@
compatible = "qcom,rpm-qcs404";
qcom,glink-channels = "rpm_requests";
+ bimc: interconnect@0 {
+ compatible = "qcom,qcs404-bimc";
+ #interconnect-cells = <1>;
+ clock-names = "bus_clk", "bus_a_clk";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ };
+
+ pcnoc: interconnect@1 {
+ compatible = "qcom,qcs404-pcnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus_clk", "bus_a_clk";
+ clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+ <&rpmcc RPM_SMD_PNOC_A_CLK>;
+ };
+
+ snoc: interconnect@2 {
+ compatible = "qcom,qcs404-snoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus_clk", "bus_a_clk";
+ clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ };
+
rpmcc: clock-controller {
compatible = "qcom,rpmcc-qcs404";
#clock-cells = <1>;
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 4/4] dt-bindings: interconnect: qcs404: Introduce qcom,qos DT property
2019-04-15 10:43 [PATCH v2 0/4] Add QCS404 interconnect provider driver Georgi Djakov
` (2 preceding siblings ...)
2019-04-15 10:43 ` [PATCH v2 3/4] arm64: dts: qcs404: Add interconnect provider DT nodes Georgi Djakov
@ 2019-04-15 10:43 ` Georgi Djakov
2019-04-18 22:51 ` Bjorn Andersson
3 siblings, 1 reply; 9+ messages in thread
From: Georgi Djakov @ 2019-04-15 10:43 UTC (permalink / raw)
To: robh+dt, bjorn.andersson, georgi.djakov
Cc: vkoul, evgreen, daidavid1, linux-pm, devicetree, linux-kernel,
linux-arm-msm
There are separate hardware blocks per each interconnect that allow QoS
configuration to be applied to each port (node). There are different kinds of
priorities that could be set on these ports. Each port supports also various
QoS modes such as "fixed", "limiter", "bypass" and "regulator". Depending on
the mode, there are a few additional knobs that could be configured.
Introduce the qcom,qos property, so that we describe this relation in DT and
allow the interconnect provider drivers can make use of it.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
v2:
- New patch.
.../bindings/interconnect/qcom,qcs404.txt | 31 +++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
index 9befcd14a5b5..b971e0ee2963 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
@@ -11,9 +11,37 @@ Required properties :
Optional properties :
clocks : list of phandles and specifiers to all interconnect bus clocks
clock-names : clock names should include both "bus_clk" and "bus_a_clk"
+qcom,qos : phandle to the QoS device-tree node
Example:
+soc {
+ ...
+ bimc_qos: interconnect@400000 {
+ compatible = "qcom,qcs404-bimc-qos";
+ reg = <0x400000 0x80000>;
+ clock-names = "bus_clk", "bus_a_clk";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ };
+
+ pcnoc_qos: interconnect@500000 {
+ compatible = "qcom,qcs404-pcnoc-qos";
+ reg = <0x500000 0x15080>;
+ clock-names = "bus_clk", "bus_a_clk";
+ clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+ <&rpmcc RPM_SMD_PNOC_A_CLK>;
+ };
+
+ snoc_qos: interconnect@580000 {
+ compatible = "qcom,qcs404-snoc-qos";
+ reg = <0x580000 0x14000>;
+ clock-names = "bus_clk", "bus_a_clk";
+ clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ };
+};
+
rpm-glink {
...
rpm_requests: glink-channel {
@@ -24,6 +52,7 @@ rpm-glink {
clock-names = "bus_clk", "bus_a_clk";
clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
<&rpmcc RPM_SMD_BIMC_A_CLK>;
+ qcom,qos = <&bimc_qos>;
};
pnoc: interconnect@1 {
@@ -32,6 +61,7 @@ rpm-glink {
clock-names = "bus_clk", "bus_a_clk";
clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
<&rpmcc RPM_SMD_PNOC_A_CLK>;
+ qcom,qos = <&pcnoc_qos>;
};
snoc: interconnect@2 {
@@ -40,6 +70,7 @@ rpm-glink {
clock-names = "bus_clk", "bus_a_clk";
clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
<&rpmcc RPM_SMD_SNOC_A_CLK>;
+ qcom,qos = <&snoc_qos>;
};
};
};
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v2 4/4] dt-bindings: interconnect: qcs404: Introduce qcom,qos DT property
2019-04-15 10:43 ` [PATCH v2 4/4] dt-bindings: interconnect: qcs404: Introduce qcom,qos DT property Georgi Djakov
@ 2019-04-18 22:51 ` Bjorn Andersson
2019-05-23 15:58 ` Georgi Djakov
0 siblings, 1 reply; 9+ messages in thread
From: Bjorn Andersson @ 2019-04-18 22:51 UTC (permalink / raw)
To: Georgi Djakov
Cc: robh+dt, vkoul, evgreen, daidavid1, linux-pm, devicetree,
linux-kernel, linux-arm-msm
On Mon 15 Apr 03:43 PDT 2019, Georgi Djakov wrote:
> There are separate hardware blocks per each interconnect that allow QoS
> configuration to be applied to each port (node). There are different kinds of
> priorities that could be set on these ports. Each port supports also various
> QoS modes such as "fixed", "limiter", "bypass" and "regulator". Depending on
> the mode, there are a few additional knobs that could be configured.
>
> Introduce the qcom,qos property, so that we describe this relation in DT and
> allow the interconnect provider drivers can make use of it.
>
As the example shows we will end up with two nodes describing the same
hardware with pretty much identical set of properties.
I really do think it's better to represent and implement the NoC
controllers on the mmio/platform bus and have a small "proxy" as a child
of the RPM.
By doing this you avoid the duplication of the clock properties and you
don't need the qcom,qos reference to pair up each "bus performance
driver" to the "bus qos driver".
And you still maintain the idea that the entity you request bandwidth
votes with are the NoC controller (which also will be the QoS
controller).
Regards,
Bjorn
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> ---
>
> v2:
> - New patch.
>
> .../bindings/interconnect/qcom,qcs404.txt | 31 +++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
> index 9befcd14a5b5..b971e0ee2963 100644
> --- a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
> +++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
> @@ -11,9 +11,37 @@ Required properties :
> Optional properties :
> clocks : list of phandles and specifiers to all interconnect bus clocks
> clock-names : clock names should include both "bus_clk" and "bus_a_clk"
> +qcom,qos : phandle to the QoS device-tree node
>
> Example:
>
> +soc {
> + ...
> + bimc_qos: interconnect@400000 {
> + compatible = "qcom,qcs404-bimc-qos";
> + reg = <0x400000 0x80000>;
> + clock-names = "bus_clk", "bus_a_clk";
> + clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
> + <&rpmcc RPM_SMD_BIMC_A_CLK>;
> + };
> +
> + pcnoc_qos: interconnect@500000 {
> + compatible = "qcom,qcs404-pcnoc-qos";
> + reg = <0x500000 0x15080>;
> + clock-names = "bus_clk", "bus_a_clk";
> + clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
> + <&rpmcc RPM_SMD_PNOC_A_CLK>;
> + };
> +
> + snoc_qos: interconnect@580000 {
> + compatible = "qcom,qcs404-snoc-qos";
> + reg = <0x580000 0x14000>;
> + clock-names = "bus_clk", "bus_a_clk";
> + clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
> + <&rpmcc RPM_SMD_SNOC_A_CLK>;
> + };
> +};
> +
> rpm-glink {
> ...
> rpm_requests: glink-channel {
> @@ -24,6 +52,7 @@ rpm-glink {
> clock-names = "bus_clk", "bus_a_clk";
> clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
> <&rpmcc RPM_SMD_BIMC_A_CLK>;
> + qcom,qos = <&bimc_qos>;
> };
>
> pnoc: interconnect@1 {
> @@ -32,6 +61,7 @@ rpm-glink {
> clock-names = "bus_clk", "bus_a_clk";
> clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
> <&rpmcc RPM_SMD_PNOC_A_CLK>;
> + qcom,qos = <&pcnoc_qos>;
> };
>
> snoc: interconnect@2 {
> @@ -40,6 +70,7 @@ rpm-glink {
> clock-names = "bus_clk", "bus_a_clk";
> clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
> <&rpmcc RPM_SMD_SNOC_A_CLK>;
> + qcom,qos = <&snoc_qos>;
> };
> };
> };
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 2/4] interconnect: qcom: Add QCS404 interconnect provider driver
2019-04-15 10:43 ` [PATCH v2 2/4] interconnect: qcom: Add QCS404 interconnect provider driver Georgi Djakov
@ 2019-04-18 23:02 ` Bjorn Andersson
0 siblings, 0 replies; 9+ messages in thread
From: Bjorn Andersson @ 2019-04-18 23:02 UTC (permalink / raw)
To: Georgi Djakov
Cc: robh+dt, vkoul, evgreen, daidavid1, linux-pm, devicetree,
linux-kernel, linux-arm-msm
On Mon 15 Apr 03:43 PDT 2019, Georgi Djakov wrote:
> diff --git a/drivers/interconnect/qcom/qcs404.c b/drivers/interconnect/qcom/qcs404.c
[..]
> +#define QCS404_MASTER_AMPSS_M0 0
> +#define QCS404_MASTER_GRAPHICS_3D 1
> +#define QCS404_MASTER_MDP_PORT0 2
> +#define QCS404_SNOC_BIMC_1_MAS 3
> +#define QCS404_MASTER_TCU_0 4
> +#define QCS404_MASTER_SPDM 5
> +#define QCS404_MASTER_BLSP_1 6
> +#define QCS404_MASTER_BLSP_2 7
> +#define QCS404_MASTER_XM_USB_HS1 8
> +#define QCS404_MASTER_CRYPTO_CORE0 9
> +#define QCS404_MASTER_SDCC_1 10
> +#define QCS404_MASTER_SDCC_2 11
> +#define QCS404_SNOC_PNOC_MAS 12
> +#define QCS404_MASTER_QPIC 13
> +#define QCS404_MASTER_QDSS_BAM 14
> +#define QCS404_BIMC_SNOC_MAS 15
> +#define QCS404_PNOC_SNOC_MAS 16
> +#define QCS404_MASTER_QDSS_ETR 17
> +#define QCS404_MASTER_EMAC 18
> +#define QCS404_MASTER_PCIE 19
> +#define QCS404_MASTER_USB3 20
> +#define QCS404_PNOC_INT_0 21
> +#define QCS404_PNOC_INT_2 22
> +#define QCS404_PNOC_INT_3 23
> +#define QCS404_PNOC_SLV_0 24
> +#define QCS404_PNOC_SLV_1 25
> +#define QCS404_PNOC_SLV_2 26
> +#define QCS404_PNOC_SLV_3 27
> +#define QCS404_PNOC_SLV_4 28
> +#define QCS404_PNOC_SLV_6 29
> +#define QCS404_PNOC_SLV_7 30
> +#define QCS404_PNOC_SLV_8 31
> +#define QCS404_PNOC_SLV_9 32
> +#define QCS404_PNOC_SLV_10 33
> +#define QCS404_PNOC_SLV_11 34
> +#define QCS404_SNOC_QDSS_INT 35
> +#define QCS404_SNOC_INT_0 36
> +#define QCS404_SNOC_INT_1 37
> +#define QCS404_SNOC_INT_2 38
> +#define QCS404_SLAVE_EBI_CH0 39
> +#define QCS404_BIMC_SNOC_SLV 40
> +#define QCS404_SLAVE_SPDM_WRAPPER 41
> +#define QCS404_SLAVE_PDM 42
> +#define QCS404_SLAVE_PRNG 43
> +#define QCS404_SLAVE_TCSR 44
> +#define QCS404_SLAVE_SNOC_CFG 45
> +#define QCS404_SLAVE_MESSAGE_RAM 46
> +#define QCS404_SLAVE_DISPLAY_CFG 47
> +#define QCS404_SLAVE_GRAPHICS_3D_CFG 48
> +#define QCS404_SLAVE_BLSP_1 49
> +#define QCS404_SLAVE_TLMM_NORTH 50
> +#define QCS404_SLAVE_PCIE_1 51
> +#define QCS404_SLAVE_EMAC_CFG 52
> +#define QCS404_SLAVE_BLSP_2 53
> +#define QCS404_SLAVE_TLMM_EAST 54
> +#define QCS404_SLAVE_TCU 55
> +#define QCS404_SLAVE_PMIC_ARB 56
> +#define QCS404_SLAVE_SDCC_1 57
> +#define QCS404_SLAVE_SDCC_2 58
> +#define QCS404_SLAVE_TLMM_SOUTH 59
> +#define QCS404_SLAVE_USB_HS 60
> +#define QCS404_SLAVE_USB3 61
> +#define QCS404_SLAVE_CRYPTO_0_CFG 62
> +#define QCS404_PNOC_SNOC_SLV 63
> +#define QCS404_SLAVE_APPSS 64
> +#define QCS404_SLAVE_WCSS 65
> +#define QCS404_SNOC_BIMC_1_SLV 66
> +#define QCS404_SLAVE_OCIMEM 67
> +#define QCS404_SNOC_PNOC_SLV 68
> +#define QCS404_SLAVE_QDSS_STM 69
> +#define QCS404_SLAVE_CATS_128 70
> +#define QCS404_SLAVE_OCMEM_64 71
> +#define QCS404_SLAVE_LPASS 72
An enum would probably be cleaner, given that the actual values are not
significant.
[..]
> +static int qnoc_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + const struct qcom_icc_desc *desc;
> + struct icc_onecell_data *data;
> + struct icc_provider *provider;
> + struct qcom_icc_node **qnodes;
> + struct qcom_icc_provider *qp;
> + struct icc_node *node;
> + size_t num_nodes, i;
> + int ret;
> +
> + rpm = dev_get_drvdata(dev->parent);
> + if (!rpm) {
> + dev_err(dev, "unable to retrieve handle to RPM\n");
> + return -ENODEV;
> + }
In line with my feedback on the DT binding I would prefer if this driver
deals with the devices on the mmio/soc bus and you move the SMD/RPM part
to a separate driver - then perform the SMD/RPM operation by calling
into the other driver.
Given how much of this driver is platforms specific then I think it's a
pretty clean split for adding further (SMD/RPM based) platforms.
Except for the decision on where in the device tree this sits I think
the implementation looks good now!
Regards,
Bjorn
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 1/4] dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings
2019-04-15 10:43 ` [PATCH v2 1/4] dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings Georgi Djakov
@ 2019-04-29 22:16 ` Rob Herring
0 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2019-04-29 22:16 UTC (permalink / raw)
To: Georgi Djakov
Cc: bjorn.andersson, vkoul, evgreen, daidavid1, linux-pm, devicetree,
linux-kernel, linux-arm-msm
On Mon, Apr 15, 2019 at 01:43:54PM +0300, Georgi Djakov wrote:
> The Qualcomm QCS404 platform has several buses that could be controlled
> and tuned according to the bandwidth demand.
>
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> ---
>
> v2:
> - No changes.
>
> .../bindings/interconnect/qcom,qcs404.txt | 45 +++++++++++++++++++
> 1 file changed, 45 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
>
> diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
> new file mode 100644
> index 000000000000..9befcd14a5b5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
> @@ -0,0 +1,45 @@
> +Qualcomm QCS404 Network-On-Chip interconnect driver binding
> +-----------------------------------------------------------
> +
> +Required properties :
> +- compatible : shall contain only one of the following:
> + "qcom,qcs404-bimc"
> + "qcom,qcs404-pcnoc"
> + "qcom,qcs404-snoc"
> +- #interconnect-cells : should contain 1
> +
> +Optional properties :
> +clocks : list of phandles and specifiers to all interconnect bus clocks
> +clock-names : clock names should include both "bus_clk" and "bus_a_clk"
> +
> +Example:
> +
> +rpm-glink {
> + ...
> + rpm_requests: glink-channel {
> + ...
> + bimc: interconnect@0 {
Unit-address needs a 'reg' property. dtc should give you a warning
(maybe W=1 is still needed).
> + compatible = "qcom,qcs404-bimc";
> + #interconnect-cells = <1>;
> + clock-names = "bus_clk", "bus_a_clk";
> + clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
> + <&rpmcc RPM_SMD_BIMC_A_CLK>;
> + };
> +
> + pnoc: interconnect@1 {
> + compatible = "qcom,qcs404-pcnoc";
> + #interconnect-cells = <1>;
> + clock-names = "bus_clk", "bus_a_clk";
> + clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
> + <&rpmcc RPM_SMD_PNOC_A_CLK>;
> + };
> +
> + snoc: interconnect@2 {
> + compatible = "qcom,qcs404-snoc";
> + #interconnect-cells = <1>;
> + clock-names = "bus_clk", "bus_a_clk";
> + clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
> + <&rpmcc RPM_SMD_SNOC_A_CLK>;
> + };
> + };
> +};
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 4/4] dt-bindings: interconnect: qcs404: Introduce qcom,qos DT property
2019-04-18 22:51 ` Bjorn Andersson
@ 2019-05-23 15:58 ` Georgi Djakov
0 siblings, 0 replies; 9+ messages in thread
From: Georgi Djakov @ 2019-05-23 15:58 UTC (permalink / raw)
To: Bjorn Andersson, robh+dt
Cc: vkoul, evgreen, daidavid1, linux-pm, devicetree, linux-kernel,
linux-arm-msm
Hi Bjorn and Rob,
On 4/19/19 01:51, Bjorn Andersson wrote:
> On Mon 15 Apr 03:43 PDT 2019, Georgi Djakov wrote:
>
>> There are separate hardware blocks per each interconnect that allow QoS
>> configuration to be applied to each port (node). There are different kinds of
>> priorities that could be set on these ports. Each port supports also various
>> QoS modes such as "fixed", "limiter", "bypass" and "regulator". Depending on
>> the mode, there are a few additional knobs that could be configured.
>>
>> Introduce the qcom,qos property, so that we describe this relation in DT and
>> allow the interconnect provider drivers can make use of it.
>>
>
> As the example shows we will end up with two nodes describing the same
> hardware with pretty much identical set of properties.
I am still split and hesitant about what would be the best way to represent this
in DT and it would be nice to reach some conclusion.
So the idea is that the QoS driver could be a standalone driver that does some
static QoS configuration. The clocks i have listed in the example below are not
the same, sorry. We should list there some of the interface clocks that need to
be enabled before configuring the port priorities instead. For example USB or
UFS axi clock and not the NoC clocks.
This makes the DT properties of the two nodes different. Оn one side we collect
bandwidth requests and send them to the remote processor (RPM) and each NoC is
represented in DT as child of RPM (like the rpm controlled regulators and
clocks). On the other side we also have the mmio registers for configuring port
priorities that may fit in DT under soc {} with their mmio registers and a list
of iface clocks.
> I really do think it's better to represent and implement the NoC
> controllers on the mmio/platform bus and have a small "proxy" as a child
> of the RPM.
>
> By doing this you avoid the duplication of the clock properties and you
> don't need the qcom,qos reference to pair up each "bus performance
> driver" to the "bus qos driver".
The clock properties would contain different set of clocks - NoC clocks for the
DT nodes in rpm {} and the iface clocks for the QoS DT nodes in soc {}.
> And you still maintain the idea that the entity you request bandwidth
> votes with are the NoC controller (which also will be the QoS
> controller).
I assume that the entities are the NoC controllers that we talk to through the RPM.
Thanks,
Georgi
>
> Regards,
> Bjorn
>
>> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
>> ---
>>
>> v2:
>> - New patch.
>>
>> .../bindings/interconnect/qcom,qcs404.txt | 31 +++++++++++++++++++
>> 1 file changed, 31 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
>> index 9befcd14a5b5..b971e0ee2963 100644
>> --- a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
>> +++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
>> @@ -11,9 +11,37 @@ Required properties :
>> Optional properties :
>> clocks : list of phandles and specifiers to all interconnect bus clocks
>> clock-names : clock names should include both "bus_clk" and "bus_a_clk"
>> +qcom,qos : phandle to the QoS device-tree node
>>
>> Example:
>>
>> +soc {
>> + ...
>> + bimc_qos: interconnect@400000 {
>> + compatible = "qcom,qcs404-bimc-qos";
>> + reg = <0x400000 0x80000>;
>> + clock-names = "bus_clk", "bus_a_clk";
>> + clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
>> + <&rpmcc RPM_SMD_BIMC_A_CLK>;
>> + };
>> +
>> + pcnoc_qos: interconnect@500000 {
>> + compatible = "qcom,qcs404-pcnoc-qos";
>> + reg = <0x500000 0x15080>;
>> + clock-names = "bus_clk", "bus_a_clk";
>> + clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
>> + <&rpmcc RPM_SMD_PNOC_A_CLK>;
>> + };
>> +
>> + snoc_qos: interconnect@580000 {
>> + compatible = "qcom,qcs404-snoc-qos";
>> + reg = <0x580000 0x14000>;
>> + clock-names = "bus_clk", "bus_a_clk";
>> + clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
>> + <&rpmcc RPM_SMD_SNOC_A_CLK>;
>> + };
>> +};
>> +
>> rpm-glink {
>> ...
>> rpm_requests: glink-channel {
>> @@ -24,6 +52,7 @@ rpm-glink {
>> clock-names = "bus_clk", "bus_a_clk";
>> clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
>> <&rpmcc RPM_SMD_BIMC_A_CLK>;
>> + qcom,qos = <&bimc_qos>;
>> };
>>
>> pnoc: interconnect@1 {
>> @@ -32,6 +61,7 @@ rpm-glink {
>> clock-names = "bus_clk", "bus_a_clk";
>> clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
>> <&rpmcc RPM_SMD_PNOC_A_CLK>;
>> + qcom,qos = <&pcnoc_qos>;
>> };
>>
>> snoc: interconnect@2 {
>> @@ -40,6 +70,7 @@ rpm-glink {
>> clock-names = "bus_clk", "bus_a_clk";
>> clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
>> <&rpmcc RPM_SMD_SNOC_A_CLK>;
>> + qcom,qos = <&snoc_qos>;
>> };
>> };
>> };
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2019-05-23 15:58 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-15 10:43 [PATCH v2 0/4] Add QCS404 interconnect provider driver Georgi Djakov
2019-04-15 10:43 ` [PATCH v2 1/4] dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings Georgi Djakov
2019-04-29 22:16 ` Rob Herring
2019-04-15 10:43 ` [PATCH v2 2/4] interconnect: qcom: Add QCS404 interconnect provider driver Georgi Djakov
2019-04-18 23:02 ` Bjorn Andersson
2019-04-15 10:43 ` [PATCH v2 3/4] arm64: dts: qcs404: Add interconnect provider DT nodes Georgi Djakov
2019-04-15 10:43 ` [PATCH v2 4/4] dt-bindings: interconnect: qcs404: Introduce qcom,qos DT property Georgi Djakov
2019-04-18 22:51 ` Bjorn Andersson
2019-05-23 15:58 ` Georgi Djakov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).