From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, "Jiri Slaby" <jslaby@suse.com>,
"Andrey Batyiev" <batyiev@gmail.com>,
"Petr Štetiar" <ynezz@true.cz>,
"Sasha Levin (Microsoft)" <sashal@kernel.org>
Subject: [PATCH 4.9 10/32] serial: ar933x_uart: Fix build failure with disabled console
Date: Thu, 2 May 2019 17:20:56 +0200 [thread overview]
Message-ID: <20190502143318.626319198@linuxfoundation.org> (raw)
In-Reply-To: <20190502143314.649935114@linuxfoundation.org>
[ Upstream commit 72ff51d8dd262d1fef25baedc2ac35116435be47 ]
Andrey has reported on OpenWrt's bug tracking system[1], that he
currently can't use ar93xx_uart as pure serial UART without console
(CONFIG_SERIAL_8250_CONSOLE and CONFIG_SERIAL_AR933X_CONSOLE undefined),
because compilation ends with following error:
ar933x_uart.c: In function 'ar933x_uart_console_write':
ar933x_uart.c:550:14: error: 'struct uart_port' has no
member named 'sysrq'
So this patch moves all the code related to console handling behind
series of CONFIG_SERIAL_AR933X_CONSOLE ifdefs.
1. https://bugs.openwrt.org/index.php?do=details&task_id=2152
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Andrey Batyiev <batyiev@gmail.com>
Reported-by: Andrey Batyiev <batyiev@gmail.com>
Tested-by: Andrey Batyiev <batyiev@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin (Microsoft) <sashal@kernel.org>
---
drivers/tty/serial/ar933x_uart.c | 24 ++++++++----------------
1 file changed, 8 insertions(+), 16 deletions(-)
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c
index 73137f4aac20..d4462512605b 100644
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -52,11 +52,6 @@ struct ar933x_uart_port {
struct clk *clk;
};
-static inline bool ar933x_uart_console_enabled(void)
-{
- return IS_ENABLED(CONFIG_SERIAL_AR933X_CONSOLE);
-}
-
static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up,
int offset)
{
@@ -511,6 +506,7 @@ static struct uart_ops ar933x_uart_ops = {
.verify_port = ar933x_uart_verify_port,
};
+#ifdef CONFIG_SERIAL_AR933X_CONSOLE
static struct ar933x_uart_port *
ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS];
@@ -607,14 +603,7 @@ static struct console ar933x_uart_console = {
.index = -1,
.data = &ar933x_uart_driver,
};
-
-static void ar933x_uart_add_console_port(struct ar933x_uart_port *up)
-{
- if (!ar933x_uart_console_enabled())
- return;
-
- ar933x_console_ports[up->port.line] = up;
-}
+#endif /* CONFIG_SERIAL_AR933X_CONSOLE */
static struct uart_driver ar933x_uart_driver = {
.owner = THIS_MODULE,
@@ -703,7 +692,9 @@ static int ar933x_uart_probe(struct platform_device *pdev)
baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP);
up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD);
- ar933x_uart_add_console_port(up);
+#ifdef CONFIG_SERIAL_AR933X_CONSOLE
+ ar933x_console_ports[up->port.line] = up;
+#endif
ret = uart_add_one_port(&ar933x_uart_driver, &up->port);
if (ret)
@@ -752,8 +743,9 @@ static int __init ar933x_uart_init(void)
{
int ret;
- if (ar933x_uart_console_enabled())
- ar933x_uart_driver.cons = &ar933x_uart_console;
+#ifdef CONFIG_SERIAL_AR933X_CONSOLE
+ ar933x_uart_driver.cons = &ar933x_uart_console;
+#endif
ret = uart_register_driver(&ar933x_uart_driver);
if (ret)
--
2.19.1
next prev parent reply other threads:[~2019-05-02 15:23 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-02 15:20 [PATCH 4.9 00/32] 4.9.173-stable review Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.9 01/32] usbnet: ipheth: prevent TX queue timeouts when device not ready Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.9 02/32] usbnet: ipheth: fix potential null pointer dereference in ipheth_carrier_set Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.9 03/32] media: vivid: check if the cec_adapter is valid Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.9 04/32] ARM: dts: bcm283x: Fix hdmi hpd gpio pull Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.9 05/32] s390: limit brk randomization to 32MB Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.9 06/32] qlcnic: Avoid potential NULL pointer dereference Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.9 07/32] netfilter: nft_set_rbtree: check for inactive element after flag mismatch Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.9 08/32] netfilter: bridge: set skb transport_header before entering NF_INET_PRE_ROUTING Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.9 09/32] sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init() Greg Kroah-Hartman
2019-05-02 15:20 ` Greg Kroah-Hartman [this message]
2019-05-02 15:20 ` [PATCH 4.9 11/32] usb: gadget: net2280: Fix overrun of OUT messages Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.9 12/32] usb: gadget: net2280: Fix net2280_dequeue() Greg Kroah-Hartman
2019-05-02 15:20 ` [PATCH 4.9 13/32] usb: gadget: net2272: Fix net2272_dequeue() Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.9 14/32] ARM: dts: pfla02: increase phy reset duration Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.9 15/32] net: ks8851: Dequeue RX packets explicitly Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.9 16/32] net: ks8851: Reassert reset pin if chip ID check fails Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.9 17/32] net: ks8851: Delay requesting IRQ until opened Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.9 18/32] net: ks8851: Set initial carrier state to down Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.9 19/32] staging: rtl8712: uninitialized memory in read_bbreg_hdl() Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.9 20/32] NFS: Fix a typo in nfs_init_timeout_values() Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.9 21/32] net: xilinx: fix possible object reference leak Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.9 22/32] net: ibm: " Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.9 23/32] net: ethernet: ti: " Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.9 24/32] scsi: qla4xxx: fix a potential NULL pointer dereference Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.9 25/32] usb: u132-hcd: fix resource leak Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.9 26/32] ceph: fix use-after-free on symlink traversal Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.9 27/32] scsi: zfcp: reduce flood of fcrscn1 trace records on multi-element RSCN Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.9 28/32] libata: fix using DMA buffers on stack Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.9 29/32] gpio: of: Fix of_gpiochip_add() error path Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.9 30/32] kconfig/[mn]conf: handle backspace (^H) key Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.9 31/32] leds: pca9532: fix a potential NULL pointer dereference Greg Kroah-Hartman
2019-05-02 15:21 ` [PATCH 4.9 32/32] vfio/type1: Limit DMA mappings per container Greg Kroah-Hartman
2019-05-02 23:06 ` [PATCH 4.9 00/32] 4.9.173-stable review kernelci.org bot
2019-05-03 7:04 ` Naresh Kamboju
2019-05-03 9:27 ` Jon Hunter
2019-05-03 17:15 ` Guenter Roeck
2019-05-03 21:21 ` shuah
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190502143318.626319198@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=batyiev@gmail.com \
--cc=jslaby@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
--cc=ynezz@true.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).