linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 00/79] Convert files to ReST
@ 2019-04-22 13:26 ` Mauro Carvalho Chehab
  2019-04-22 13:26   ` [PATCH v2 01/79] docs: core-api: fix broken references for div64.c and gcd.c Mauro Carvalho Chehab
                     ` (77 more replies)
  0 siblings, 78 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:26 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Palmer Dabbelt, Albert Ou, Alexei Starovoitov,
	Daniel Borkmann, Martin KaFai Lau, Song Liu, Yonghong Song,
	Greentime Hu, Vincent Chen, linux-riscv, netdev, bpf,
	Changbin Du, Rafael J. Wysocki

This series convert lots of files to be properly parsed by Sphinx
as ReST files.

As it touches on lot of stuff, this series is based on linux-next,
at tag next-20190418.

The version 2 is mainly focused on addressing a comment I received
from several subsystem maintainters:

- While it was doing the conversion, the files were not
  being renamed to ReST. So, they weren't producing any document.

So, I opted to do the rename as well, on each patch, and to add a
:orphan:  markup at the beginning of each file, in order to shut up
the Sphinx warning that the file was not included on any TOC.

The second version of this series also touches a lot more directories
without any index.rst.

After this patch, just a few directories at Documentation won't have
an index.rst file:

    $ for i in $(find Documentation/ -name '*.txt'|perl -ne 's,([^/]*/[^/]*/).*,\1,; print $_;'|sort|uniq|grep -v Documentation/output|grep -v Documentation/sphinx); do if [ ! -f $i/index.rst ]; then echo $i; fi; done|grep -v .txt

    Documentation/ABI/
    Documentation/devicetree/
    Documentation/features/
    Documentation/platform/
    Documentation/RCU/
    Documentation/scsi/
    Documentation/virtual/

I'm working on another patch patch series with removes the :orphan: from
the added files while adding them to some book. As such series would
cause lots of conflicts, the best would be to wait for this series to be applied
by each subsystem maintainer before adding it (probably late on some
merge window).

Ah, I removed the patches with converts /acpi, /x86 and /PCI from this
submission. As pointed by Rafael, Changbin is already working on
those.

Also, I got some acks from some of those conversions. I'm opting to not
adding here, as all patches were changed (due to the rename and addition
of the index.rst file). So, if you send your ack already, feel free to re-send.

Both this series and  the next steps are on my devel git tree,
at:

	https://git.linuxtv.org/mchehab/experimental.git/log/?h=convert_rst_v2

The final output in html can be seen at:

	https://www.infradead.org/~mchehab/rst_conversion/

Mauro Carvalho Chehab (79):
  docs: core-api: fix broken references for div64.c and gcd.c
  docs: trace: fix some Sphinx warnings
  scripts/documentation-file-ref-check: don't parse Next/ dir
  docs: aoe: convert docs to ReST and rename to *.rst
  docs: arm64: convert docs to ReST and rename to .rst
  docs: cdrom-standard.tex: convert from LaTeX to ReST
  docs: cdrom: convert docs to ReST and rename to *.rst
  docs: cgroup-v1: convert docs to ReST and rename to *.rst
  docs: cgroup-v1/blkio-controller.rst: add a note about CFQ scheduler
  docs: cpu-freq: convert docs to ReST and rename to *.rst
  docs: convert docs to ReST and rename to *.rst
  docs: fault-injection: convert docs to ReST and rename to *.rst
  docs: fb: convert docs to ReST and rename to *.rst
  docs: fpga: convert docs to ReST and rename to *.rst
  docs: gpio: convert docs to ReST and rename to *.rst
  docs: ide: convert docs to ReST and rename to *.rst
  docs: infiniband: convert docs to ReST and rename to *.rst
  docs: kbuild: convert docs to ReST and rename to *.rst
  docs: kdump: convert docs to ReST and rename to *.rst
  docs: livepatch: convert docs to ReST and rename to *.rst
  docs: locking: convert docs to ReST and rename to *.rst
  docs: mic: convert docs to ReST and rename to *.rst
  docs: netlabel: convert docs to ReST and rename to *.rst
  docs: pcmcia: convert docs to ReST and rename to *.rst
  docs: convert docs to ReST and rename to *.rst
  docs: powerpc: convert docs to ReST and rename to *.rst
  docs: pps.txt: convert to ReST and rename to pps.rst
  docs: ptp.txt: convert to ReST and move to driver-api
  docs: riscv: convert docs to ReST and rename to *.rst
  docs: Debugging390.txt: convert table to ascii artwork
  docs: s390: convert docs to ReST and rename to *.rst
  s390: include/asm/debug.h add kerneldoc markups
  docs: serial: convert docs to ReST and rename to *.rst
  docs: target: convert docs to ReST and rename to *.rst
  docs: timers: convert docs to ReST and rename to *.rst
  docs: watchdog: convert docs to ReST and rename to *.rst
  docs: xilinx: convert eemi.txt to eemi.rst
  docs: scheduler: convert docs to ReST and rename to *.rst
  docs: EDID/HOWTO.txt: convert it and rename to howto.rst
  convert docs to ReST and rename to *.rst
  docs: lcd-panel-cgram.txt: convert docs to ReST and rename to *.rst
  docs: lp855x-driver.txt: convert to ReST and move to kernel-api
  docs: m68k: convert docs to ReST and rename to *.rst
  docs: cma/debugfs.txt: convert docs to ReST and rename to *.rst
  docs: console.txt: convert docs to ReST and rename to *.rst
  docs: pti_intel_mid.txt: convert it to pti_intel_mid.rst
  docs: early-userspace: convert docs to ReST and rename to *.rst
  docs: driver-model: convert docs to ReST and rename to *.rst
  docs: arm: convert docs to ReST and rename to *.rst
  docs: memory-devices: convert ti-emif.txt to ReST
  docs: xen-tpmfront.txt: convert it to .rst
  docs: bus-devices: ti-gpmc.rst: convert it to ReST
  docs: nvmem: convert docs to ReST and rename to *.rst
  docs: phy: convert samsung-usb2.txt to ReST format
  docs: rbtree.txt: fix Sphinx build warnings
  docs: Documentation/*.txt: rename all ReST files to *.rst
  docs: accounting: convert to ReST
  docs: fmc: convert to ReST
  docs: hid: convert to ReST
  docs: ia64: convert to ReST
  docs: leds: convert to ReST
  docs: laptops: convert to ReST
  docs: iio: convert to ReST
  docs: ioctl-number.txt: convert it to ReST format
  docs: ioctl: convert to ReST
  docs: namespaces: convert to ReST
  docs: nfc: convert to ReST
  docs: md: convert to ReST
  docs: mtd: convert to ReST
  docs: nvdimm: convert to ReST
  docs: xtensa: convert to ReST
  docs: mmc: convert to ReST
  docs: sparc: convert to ReST
  docs: thermal: convert to ReST
  docs: rapidio: convert to ReST
  docs: blockdev: convert to ReST
  docs: perf: convert to ReST
  docs: sysctl: convert to ReST
  docs: block: convert to ReST

 Documentation/ABI/removed/sysfs-class-rfkill  |    2 +-
 Documentation/ABI/stable/sysfs-class-rfkill   |    2 +-
 Documentation/ABI/stable/sysfs-devices-node   |    2 +-
 Documentation/ABI/testing/procfs-diskstats    |    2 +-
 Documentation/ABI/testing/sysfs-block         |    2 +-
 Documentation/ABI/testing/sysfs-block-device  |    2 +-
 .../ABI/testing/sysfs-class-powercap          |    2 +-
 .../ABI/testing/sysfs-class-switchtec         |    2 +-
 .../ABI/testing/sysfs-devices-system-cpu      |    4 +-
 .../ABI/testing/sysfs-kernel-livepatch        |    2 +-
 Documentation/ABI/testing/sysfs-kernel-uids   |    2 +-
 .../ABI/testing/sysfs-platform-asus-laptop    |    2 +-
 .../{DMA-API-HOWTO.txt => DMA-API-HOWTO.rst}  |    2 +
 Documentation/{DMA-API.txt => DMA-API.rst}    |    8 +-
 .../{DMA-ISA-LPC.txt => DMA-ISA-LPC.rst}      |    4 +-
 ...{DMA-attributes.txt => DMA-attributes.rst} |    2 +
 Documentation/EDID/{HOWTO.txt => howto.rst}   |   31 +-
 Documentation/{IPMI.txt => IPMI.rst}          |    2 +
 .../{IRQ-affinity.txt => IRQ-affinity.rst}    |    2 +
 .../{IRQ-domain.txt => IRQ-domain.rst}        |    2 +
 Documentation/{IRQ.txt => IRQ.rst}            |    2 +
 .../{Intel-IOMMU.txt => Intel-IOMMU.rst}      |    2 +
 Documentation/PCI/pci-error-recovery.txt      |    2 +-
 Documentation/PCI/pci.txt                     |   10 +-
 Documentation/{SAK.txt => SAK.rst}            |    2 +
 Documentation/{SM501.txt => SM501.rst}        |    2 +
 .../{cgroupstats.txt => cgroupstats.rst}      |   14 +-
 ...ay-accounting.txt => delay-accounting.rst} |   61 +-
 Documentation/accounting/index.rst            |   14 +
 Documentation/accounting/{psi.txt => psi.rst} |   40 +-
 ...kstats-struct.txt => taskstats-struct.rst} |   53 +-
 .../{taskstats.txt => taskstats.rst}          |   15 +-
 Documentation/admin-guide/README.rst          |    2 +-
 Documentation/admin-guide/bug-hunting.rst     |    2 +-
 Documentation/admin-guide/cgroup-v2.rst       |    6 +-
 .../admin-guide/kernel-parameters.rst         |    2 +-
 .../admin-guide/kernel-parameters.txt         |   64 +-
 Documentation/admin-guide/l1tf.rst            |    4 +-
 Documentation/admin-guide/mm/index.rst        |    2 +-
 Documentation/admin-guide/mm/ksm.rst          |    2 +-
 .../admin-guide/mm/numa_memory_policy.rst     |    2 +-
 Documentation/aoe/{aoe.txt => aoe.rst}        |   63 +-
 Documentation/aoe/examples.rst                |   23 +
 Documentation/aoe/index.rst                   |   19 +
 Documentation/aoe/{todo.txt => todo.rst}      |    3 +
 Documentation/aoe/udev.txt                    |    2 +-
 Documentation/arm/Marvell/README              |  395 ---
 Documentation/arm/Netwinder                   |   78 -
 Documentation/arm/SA1100/FreeBird             |   21 -
 Documentation/arm/SA1100/empeg                |    2 -
 Documentation/arm/SA1100/serial_UART          |   47 -
 Documentation/arm/{README => arm.rst}         |   50 +-
 Documentation/arm/{Booting => booting.rst}    |   71 +-
 ...ance.txt => cluster-pm-race-avoidance.rst} |  177 +-
 .../arm/{firmware.txt => firmware.rst}        |   14 +-
 Documentation/arm/index.rst                   |   80 +
 .../arm/{Interrupts => interrupts.rst}        |   86 +-
 Documentation/arm/{IXP4xx => ixp4xx.rst}      |   61 +-
 ...nel_mode_neon.txt => kernel_mode_neon.rst} |    3 +
 ...er_helpers.txt => kernel_user_helpers.rst} |   79 +-
 .../keystone/{knav-qmss.txt => knav-qmss.rst} |    6 +-
 .../keystone/{Overview.txt => overview.rst}   |   47 +-
 Documentation/arm/marvel.rst                  |  488 +++
 .../arm/{mem_alignment => mem_alignment.rst}  |   11 +-
 Documentation/arm/{memory.txt => memory.rst}  |    9 +-
 .../arm/{Microchip/README => microchip.rst}   |   63 +-
 Documentation/arm/netwinder.rst               |   85 +
 Documentation/arm/nwfpe/index.rst             |   11 +
 .../nwfpe/{README.FPE => netwinder-fpe.rst}   |   24 +-
 Documentation/arm/nwfpe/{NOTES => notes.rst}  |    3 +
 Documentation/arm/nwfpe/{README => nwfpe.rst} |   10 +-
 Documentation/arm/nwfpe/{TODO => todo.rst}    |   47 +-
 Documentation/arm/{OMAP/DSS => omap/dss.rst}  |  112 +-
 Documentation/arm/omap/index.rst              |   10 +
 .../arm/{OMAP/README => omap/omap.rst}        |    7 +
 .../arm/{OMAP/omap_pm => omap/omap_pm.rst}    |   55 +-
 Documentation/arm/{Porting => porting.rst}    |   14 +-
 Documentation/arm/pxa/{mfp.txt => mfp.rst}    |  106 +-
 .../{SA1100/ADSBitsy => sa1100/adsbitsy.rst}  |   14 +-
 .../{SA1100/Assabet => sa1100/assabet.rst}    |  185 +-
 .../arm/{SA1100/Brutus => sa1100/brutus.rst}  |   45 +-
 .../arm/{SA1100/CERF => sa1100/cerf.rst}      |   10 +-
 Documentation/arm/sa1100/freebird.rst         |   25 +
 .../graphicsclient.rst}                       |   46 +-
 .../graphicsmaster.rst}                       |   13 +-
 .../HUW_WEBPANEL => sa1100/huw_webpanel.rst}  |    8 +-
 Documentation/arm/sa1100/index.rst            |   23 +
 .../arm/{SA1100/Itsy => sa1100/itsy.rst}      |   14 +-
 .../arm/{SA1100/LART => sa1100/lart.rst}      |    3 +-
 .../nanoEngine => sa1100/nanoengine.rst}      |    6 +-
 .../{SA1100/Pangolin => sa1100/pangolin.rst}  |   10 +-
 .../arm/{SA1100/PLEB => sa1100/pleb.rst}      |    6 +-
 Documentation/arm/sa1100/serial_uart.rst      |   51 +
 .../arm/{SA1100/Tifon => sa1100/tifon.rst}    |    4 +-
 .../arm/{SA1100/Yopy => sa1100/yopy.rst}      |    5 +-
 .../cpufreq.rst}                              |    5 +-
 .../eb2410itx.rst}                            |    5 +-
 .../GPIO.txt => samsung-s3c24xx/gpio.rst}     |   23 +-
 .../H1940.txt => samsung-s3c24xx/h1940.rst}   |    5 +-
 Documentation/arm/samsung-s3c24xx/index.rst   |   18 +
 .../NAND.txt => samsung-s3c24xx/nand.rst}     |    6 +-
 .../overview.rst}                             |   21 +-
 .../s3c2412.rst}                              |    5 +-
 .../s3c2413.rst}                              |    7 +-
 .../smdk2440.rst}                             |    5 +-
 .../suspend.rst}                              |   20 +-
 .../usb-host.rst}                             |   16 +-
 .../bootloader-interface.rst}                 |   27 +-
 .../clksrc-change-registers.awk               |    0
 .../{Samsung/GPIO.txt => samsung/gpio.rst}    |    7 +-
 Documentation/arm/samsung/index.rst           |   10 +
 .../Overview.txt => samsung/overview.rst}     |   15 +-
 Documentation/arm/{Setup => setup.rst}        |   49 +-
 .../arm/{SH-Mobile => sh-mobile}/.gitignore   |    0
 .../overview.txt => spear/overview.rst}       |   20 +-
 .../arm/sti/{overview.txt => overview.rst}    |   21 +-
 ...h407-overview.txt => stih407-overview.rst} |    9 +-
 ...h415-overview.txt => stih415-overview.rst} |    8 +-
 ...h416-overview.txt => stih416-overview.rst} |    5 +-
 ...h418-overview.txt => stih418-overview.rst} |    9 +-
 .../arm/stm32/stm32f429-overview.rst          |    5 +-
 .../arm/stm32/stm32f746-overview.rst          |    5 +-
 .../arm/stm32/stm32f769-overview.rst          |    5 +-
 .../arm/stm32/stm32h743-overview.rst          |    5 +-
 .../arm/stm32/stm32mp157-overview.rst         |    1 +
 Documentation/arm/{sunxi/README => sunxi.rst} |   98 +-
 .../arm/sunxi/{clocks.txt => clocks.rst}      |    7 +-
 .../arm/{swp_emulation => swp_emulation.rst}  |   24 +-
 Documentation/arm/{tcm.txt => tcm.rst}        |   54 +-
 Documentation/arm/{uefi.txt => uefi.rst}      |   39 +-
 .../release-notes.rst}                        |    4 +-
 Documentation/arm/{vlocks.txt => vlocks.rst}  |    9 +-
 ...object_usage.txt => acpi_object_usage.rst} |  288 +-
 .../arm64/{arm-acpi.txt => arm-acpi.rst}      |  155 +-
 .../arm64/{booting.txt => booting.rst}        |   91 +-
 ...egisters.txt => cpu-feature-registers.rst} |  190 +-
 .../arm64/{elf_hwcaps.txt => elf_hwcaps.rst}  |   56 +-
 .../{hugetlbpage.txt => hugetlbpage.rst}      |    7 +-
 Documentation/arm64/index.rst                 |   28 +
 ...structions.txt => legacy_instructions.rst} |   43 +-
 Documentation/arm64/memory.rst                |   98 +
 Documentation/arm64/memory.txt                |   97 -
 ...ication.txt => pointer-authentication.rst} |    2 +
 ...{silicon-errata.txt => silicon-errata.rst} |   63 +-
 Documentation/arm64/{sve.txt => sve.rst}      |   12 +-
 ...agged-pointers.txt => tagged-pointers.rst} |    6 +-
 .../{atomic_bitops.txt => atomic_bitops.rst}  |    2 +
 ...cd-panel-cgram.txt => lcd-panel-cgram.rst} |    9 +-
 Documentation/backlight/lp855x-driver.rst     |   83 +
 Documentation/backlight/lp855x-driver.txt     |   66 -
 .../{bfq-iosched.txt => bfq-iosched.rst}      |   68 +-
 .../block/{biodoc.txt => biodoc.rst}          |  365 ++-
 .../block/{biovecs.txt => biovecs.rst}        |   20 +-
 Documentation/block/capability.rst            |   18 +
 Documentation/block/capability.txt            |   15 -
 ...ne-partition.txt => cmdline-partition.rst} |   13 +-
 ...{data-integrity.txt => data-integrity.rst} |   58 +-
 ...dline-iosched.txt => deadline-iosched.rst} |   19 +-
 Documentation/block/index.rst                 |   25 +
 .../block/{ioprio.txt => ioprio.rst}          |   95 +-
 .../{kyber-iosched.txt => kyber-iosched.rst}  |    3 +-
 .../block/{null_blk.txt => null_blk.rst}      |   65 +-
 Documentation/block/{pr.txt => pr.rst}        |   14 +-
 .../{queue-sysfs.txt => queue-sysfs.rst}      |    7 +-
 .../block/{request.txt => request.rst}        |   47 +-
 Documentation/block/{stat.txt => stat.rst}    |   13 +-
 ...witching-sched.txt => switching-sched.rst} |   28 +-
 ...ontrol.txt => writeback_cache_control.rst} |   12 +-
 ...structure-v9.txt => data-structure-v9.rst} |    6 +-
 Documentation/blockdev/drbd/figures.rst       |   28 +
 .../blockdev/drbd/{README.txt => index.rst}   |   15 +-
 .../blockdev/{floppy.txt => floppy.rst}       |   88 +-
 Documentation/blockdev/index.rst              |   16 +
 Documentation/blockdev/{nbd.txt => nbd.rst}   |    1 +
 .../blockdev/{paride.txt => paride.rst}       |  144 +-
 .../blockdev/{ramdisk.txt => ramdisk.rst}     |   55 +-
 Documentation/blockdev/{zram.txt => zram.rst} |  197 +-
 .../{bt8xxgpio.txt => bt8xxgpio.rst}          |    2 +
 Documentation/{btmrvl.txt => btmrvl.rst}      |    2 +
 .../bus-devices/{ti-gpmc.txt => ti-gpmc.rst}  |  159 +-
 ...-mapping.txt => bus-virt-phys-mapping.rst} |    4 +-
 Documentation/cdrom/Makefile                  |   21 -
 Documentation/cdrom/cdrom-standard.rst        | 1063 +++++++
 Documentation/cdrom/cdrom-standard.tex        | 1026 -------
 Documentation/cdrom/{ide-cd => ide-cd.rst}    |  196 +-
 Documentation/cdrom/index.rst                 |   19 +
 ...{packet-writing.txt => packet-writing.rst} |   27 +-
 ...io-controller.txt => blkio-controller.rst} |  103 +-
 .../cgroup-v1/{cgroups.txt => cgroups.rst}    |  184 +-
 .../cgroup-v1/{cpuacct.txt => cpuacct.rst}    |   15 +-
 .../cgroup-v1/{cpusets.txt => cpusets.rst}    |  205 +-
 .../cgroup-v1/{devices.txt => devices.rst}    |   40 +-
 ...er-subsystem.txt => freezer-subsystem.rst} |   14 +-
 .../cgroup-v1/{hugetlb.txt => hugetlb.rst}    |   31 +-
 Documentation/cgroup-v1/index.rst             |   30 +
 .../{memcg_test.txt => memcg_test.rst}        |  261 +-
 .../cgroup-v1/{memory.txt => memory.rst}      |  449 +--
 .../cgroup-v1/{net_cls.txt => net_cls.rst}    |   37 +-
 .../cgroup-v1/{net_prio.txt => net_prio.rst}  |   24 +-
 .../cgroup-v1/{pids.txt => pids.rst}          |   78 +-
 .../cgroup-v1/{rdma.txt => rdma.rst}          |   66 +-
 ...g-warn-once.txt => clearing-warn-once.rst} |    2 +
 .../cma/{debugfs.txt => debugfs.rst}          |    8 +-
 .../{connector.txt => connector.rst}          |  130 +-
 .../console/{console.txt => console.rst}      |   63 +-
 Documentation/core-api/kernel-api.rst         |    4 +-
 Documentation/core-api/printk-formats.rst     |    2 +-
 .../{amd-powernow.txt => amd-powernow.rst}    |   11 +-
 Documentation/cpu-freq/{core.txt => core.rst} |   68 +-
 .../{cpu-drivers.txt => cpu-drivers.rst}      |  217 +-
 ...pufreq-nforce2.txt => cpufreq-nforce2.rst} |   12 +-
 Documentation/cpu-freq/cpufreq-stats.rst      |  128 +
 Documentation/cpu-freq/cpufreq-stats.txt      |  127 -
 Documentation/cpu-freq/index.rst              |   52 +
 Documentation/cpu-freq/index.txt              |   56 -
 .../{pcc-cpufreq.txt => pcc-cpufreq.rst}      |  102 +-
 Documentation/{cpu-load.txt => cpu-load.rst}  |    2 +
 .../{cputopology.txt => cputopology.rst}      |    2 +
 Documentation/{crc32.txt => crc32.rst}        |    2 +
 Documentation/{dcdbas.txt => dcdbas.rst}      |    2 +
 ...ging-modules.txt => debugging-modules.rst} |    2 +
 ...hci1394.txt => debugging-via-ohci1394.rst} |    2 +
 Documentation/{dell_rbu.txt => dell_rbu.rst}  |    2 +
 ...{cache-policies.txt => cache-policies.rst} |   24 +-
 .../device-mapper/{cache.txt => cache.rst}    |  206 +-
 .../device-mapper/{delay.txt => delay.rst}    |   29 +-
 .../{dm-crypt.txt => dm-crypt.rst}            |   57 +-
 .../{dm-flakey.txt => dm-flakey.rst}          |   45 +-
 .../{dm-init.txt => dm-init.rst}              |   75 +-
 .../{dm-integrity.txt => dm-integrity.rst}    |   55 +-
 .../device-mapper/{dm-io.txt => dm-io.rst}    |   14 +-
 .../device-mapper/{dm-log.txt => dm-log.rst}  |    5 +-
 ...m-queue-length.txt => dm-queue-length.rst} |   25 +-
 .../{dm-raid.txt => dm-raid.rst}              |  225 +-
 ...m-service-time.txt => dm-service-time.rst} |   68 +-
 Documentation/device-mapper/dm-uevent.rst     |  110 +
 Documentation/device-mapper/dm-uevent.txt     |   97 -
 .../{dm-zoned.txt => dm-zoned.rst}            |   10 +-
 .../device-mapper/{era.txt => era.rst}        |   36 +-
 Documentation/device-mapper/index.rst         |   44 +
 .../device-mapper/{kcopyd.txt => kcopyd.rst}  |   10 +-
 Documentation/device-mapper/linear.rst        |   63 +
 Documentation/device-mapper/linear.txt        |   61 -
 .../{log-writes.txt => log-writes.rst}        |   91 +-
 ...ersistent-data.txt => persistent-data.rst} |    4 +
 .../{snapshot.txt => snapshot.rst}            |  116 +-
 .../{statistics.txt => statistics.rst}        |   66 +-
 Documentation/device-mapper/striped.rst       |   61 +
 Documentation/device-mapper/striped.txt       |   57 -
 .../device-mapper/{switch.txt => switch.rst}  |   47 +-
 ...provisioning.txt => thin-provisioning.rst} |   68 +-
 .../{unstriped.txt => unstriped.rst}          |  111 +-
 .../device-mapper/{verity.txt => verity.rst}  |   20 +-
 .../{writecache.txt => writecache.rst}        |   13 +-
 .../device-mapper/{zero.txt => zero.rst}      |   14 +-
 Documentation/devicetree/bindings/arm/xen.txt |    2 +-
 .../devicetree/bindings/phy/phy-bindings.txt  |    2 +-
 .../devicetree/booting-without-of.txt         |    4 +-
 Documentation/{digsig.txt => digsig.rst}      |    2 +
 Documentation/driver-api/gpio/driver.rst      |    2 +-
 Documentation/driver-api/pm/devices.rst       |    6 +-
 .../{pps/pps.txt => driver-api/pps.rst}       |   67 +-
 .../{ptp/ptp.txt => driver-api/ptp.rst}       |   26 +-
 Documentation/driver-api/s390-drivers.rst     |    4 +-
 Documentation/driver-api/usb/dma.rst          |    6 +-
 .../driver-api/usb/power-management.rst       |    2 +-
 .../driver-model/{binding.txt => binding.rst} |   20 +-
 .../driver-model/{bus.txt => bus.rst}         |   69 +-
 .../driver-model/{class.txt => class.rst}     |   74 +-
 ...esign-patterns.txt => design-patterns.rst} |  106 +-
 .../driver-model/{device.txt => device.rst}   |   59 +-
 .../driver-model/{devres.txt => devres.rst}   |   50 +-
 .../driver-model/{driver.txt => driver.rst}   |  112 +-
 Documentation/driver-model/index.rst          |   26 +
 .../{overview.txt => overview.rst}            |   37 +-
 .../{platform.txt => platform.rst}            |   30 +-
 .../driver-model/{porting.txt => porting.rst} |  333 +--
 .../{buffer-format.txt => buffer-format.rst}  |   19 +-
 .../{README => early_userspace_support.rst}   |    3 +
 Documentation/early-userspace/index.rst       |   18 +
 Documentation/{efi-stub.txt => efi-stub.rst}  |    2 +
 Documentation/{eisa.txt => eisa.rst}          |    6 +-
 ...ault-injection.txt => fault-injection.rst} |  265 +-
 Documentation/fault-injection/index.rst       |   20 +
 ...r-inject.txt => notifier-error-inject.rst} |   18 +-
 .../fault-injection/nvme-fault-injection.rst  |  120 +
 .../fault-injection/nvme-fault-injection.txt  |  116 -
 .../fault-injection/provoke-crashes.rst       |   48 +
 .../fault-injection/provoke-crashes.txt       |   38 -
 Documentation/fb/{api.txt => api.rst}         |   29 +-
 Documentation/fb/{arkfb.txt => arkfb.rst}     |    8 +-
 .../fb/{aty128fb.txt => aty128fb.rst}         |   35 +-
 .../fb/{cirrusfb.txt => cirrusfb.rst}         |   47 +-
 .../fb/{cmap_xfbdev.txt => cmap_xfbdev.rst}   |   57 +-
 .../fb/{deferred_io.txt => deferred_io.rst}   |   28 +-
 Documentation/fb/{efifb.txt => efifb.rst}     |   18 +-
 .../fb/{ep93xx-fb.txt => ep93xx-fb.rst}       |   27 +-
 Documentation/fb/{fbcon.txt => fbcon.rst}     |  181 +-
 .../fb/{framebuffer.txt => framebuffer.rst}   |   79 +-
 Documentation/fb/{gxfb.txt => gxfb.rst}       |   24 +-
 Documentation/fb/index.rst                    |   50 +
 .../fb/{intel810.txt => intel810.rst}         |   79 +-
 Documentation/fb/{intelfb.txt => intelfb.rst} |   62 +-
 .../fb/{internals.txt => internals.rst}       |   24 +-
 Documentation/fb/{lxfb.txt => lxfb.rst}       |   25 +-
 Documentation/fb/matroxfb.rst                 |  443 +++
 Documentation/fb/matroxfb.txt                 |  413 ---
 .../fb/{metronomefb.txt => metronomefb.rst}   |    8 +-
 Documentation/fb/{modedb.txt => modedb.rst}   |   44 +-
 Documentation/fb/pvr2fb.rst                   |   66 +
 Documentation/fb/pvr2fb.txt                   |   65 -
 Documentation/fb/{pxafb.txt => pxafb.rst}     |   81 +-
 Documentation/fb/{s3fb.txt => s3fb.rst}       |    8 +-
 .../fb/{sa1100fb.txt => sa1100fb.rst}         |   23 +-
 Documentation/fb/sh7760fb.rst                 |  130 +
 Documentation/fb/sh7760fb.txt                 |  131 -
 Documentation/fb/{sisfb.txt => sisfb.rst}     |   40 +-
 Documentation/fb/{sm501.txt => sm501.rst}     |    7 +-
 Documentation/fb/{sm712fb.txt => sm712fb.rst} |   18 +-
 Documentation/fb/sstfb.rst                    |  207 ++
 Documentation/fb/sstfb.txt                    |  174 --
 Documentation/fb/{tgafb.txt => tgafb.rst}     |   30 +-
 .../fb/{tridentfb.txt => tridentfb.rst}       |   36 +-
 Documentation/fb/{udlfb.txt => udlfb.rst}     |   55 +-
 Documentation/fb/{uvesafb.txt => uvesafb.rst} |  128 +-
 Documentation/fb/{vesafb.txt => vesafb.rst}   |  123 +-
 Documentation/fb/viafb.rst                    |  297 ++
 Documentation/fb/viafb.txt                    |  252 --
 .../fb/{vt8623fb.txt => vt8623fb.rst}         |   10 +-
 Documentation/filesystems/nfs/nfsroot.txt     |    2 +-
 .../filesystems/ramfs-rootfs-initramfs.txt    |    4 +-
 Documentation/filesystems/sysfs.txt           |    2 +-
 Documentation/filesystems/tmpfs.txt           |    2 +-
 .../filesystems/ubifs-authentication.md       |    4 +-
 Documentation/fmc/{API.txt => api.rst}        |   10 +-
 .../fmc/{carrier.txt => carrier.rst}          |   65 +-
 .../fmc/{FMC-and-SDB.txt => fmc-and-sdb.rst}  |   19 +-
 .../fmc/{fmc-chardev.txt => fmc-chardev.rst}  |    9 +-
 .../fmc/{fmc-fakedev.txt => fmc-fakedev.rst}  |   13 +-
 .../fmc/{fmc-trivial.txt => fmc-trivial.rst}  |   11 +-
 ...-write-eeprom.txt => fmc-write-eeprom.rst} |   36 +-
 .../fmc/{identifiers.txt => identifiers.rst}  |   20 +-
 Documentation/fmc/index.rst                   |   21 +
 .../fmc/{mezzanine.txt => mezzanine.rst}      |   34 +-
 .../fmc/{parameters.txt => parameters.rst}    |   11 +-
 Documentation/fpga/{dfl.txt => dfl.rst}       |   58 +-
 Documentation/fpga/index.rst                  |   17 +
 ...ex-requeue-pi.txt => futex-requeue-pi.rst} |    2 +
 .../{gcc-plugins.txt => gcc-plugins.rst}      |    2 +
 Documentation/gpio/index.rst                  |   17 +
 Documentation/gpio/{sysfs.txt => sysfs.rst}   |   39 +-
 Documentation/gpu/drm-mm.rst                  |    2 +-
 .../hid/{hid-alps.txt => hid-alps.rst}        |   85 +-
 .../hid/{hid-sensor.txt => hid-sensor.rst}    |  192 +-
 .../{hid-transport.txt => hid-transport.rst}  |   82 +-
 Documentation/hid/{hiddev.txt => hiddev.rst}  |  130 +-
 Documentation/hid/{hidraw.txt => hidraw.rst}  |   53 +-
 Documentation/hid/index.rst                   |   18 +
 Documentation/hid/intel-ish-hid.rst           |  485 +++
 Documentation/hid/intel-ish-hid.txt           |  454 ---
 Documentation/hid/{uhid.txt => uhid.rst}      |   46 +-
 Documentation/{highuid.txt => highuid.rst}    |    2 +
 .../{hw_random.txt => hw_random.rst}          |    2 +
 Documentation/hwmon/submitting-patches.rst    |    2 +-
 .../{hwspinlock.txt => hwspinlock.rst}        |    2 +
 .../ia64/{aliasing.txt => aliasing.rst}       |   71 +-
 Documentation/ia64/{efirtc.txt => efirtc.rst} |   86 +-
 .../ia64/{err_inject.txt => err_inject.rst}   |  347 ++-
 Documentation/ia64/{fsys.txt => fsys.rst}     |  127 +-
 Documentation/ia64/{README => ia64.rst}       |   26 +-
 Documentation/ia64/index.rst                  |   18 +
 .../ia64/{IRQ-redir.txt => irq-redir.rst}     |   32 +-
 Documentation/ia64/{mca.txt => mca.rst}       |   10 +-
 Documentation/ia64/{serial.txt => serial.rst} |   36 +-
 Documentation/ia64/xen.rst                    |  206 ++
 Documentation/ia64/xen.txt                    |  183 --
 Documentation/ide/changelogs.rst              |   17 +
 .../ide/{ide-tape.txt => ide-tape.rst}        |   23 +-
 Documentation/ide/{ide.txt => ide.rst}        |  147 +-
 Documentation/ide/index.rst                   |   21 +
 ...arm-plug-howto.txt => warm-plug-howto.rst} |   10 +-
 .../iio/{ep93xx_adc.txt => ep93xx_adc.rst}    |   15 +-
 .../{iio_configfs.txt => iio_configfs.rst}    |   52 +-
 Documentation/iio/index.rst                   |   12 +
 Documentation/index.rst                       |    1 +
 .../{core_locking.txt => core_locking.rst}    |   64 +-
 Documentation/infiniband/index.rst            |   23 +
 .../infiniband/{ipoib.txt => ipoib.rst}       |   24 +-
 .../infiniband/{opa_vnic.txt => opa_vnic.rst} |  108 +-
 .../infiniband/{sysfs.txt => sysfs.rst}       |    4 +-
 .../{tag_matching.txt => tag_matching.rst}    |    5 +
 .../infiniband/{user_mad.txt => user_mad.rst} |   33 +-
 .../{user_verbs.txt => user_verbs.rst}        |   12 +-
 Documentation/input/input.rst                 |    2 +-
 .../{intel_txt.txt => intel_txt.rst}          |    2 +
 .../{io-mapping.txt => io-mapping.rst}        |    2 +
 .../{io_ordering.txt => io_ordering.rst}      |    2 +
 ...g-up-ioctls.txt => botching-up-ioctls.rst} |    1 +
 Documentation/ioctl/cdrom.rst                 | 1233 ++++++++
 Documentation/ioctl/cdrom.txt                 |  967 ------
 Documentation/ioctl/{hdio.txt => hdio.rst}    |  835 ++++--
 Documentation/ioctl/index.rst                 |   16 +
 ...{ioctl-decoding.txt => ioctl-decoding.rst} |   13 +-
 Documentation/ioctl/ioctl-number.rst          |  360 +++
 Documentation/ioctl/ioctl-number.txt          |  350 ---
 Documentation/{iostats.txt => iostats.rst}    |    2 +
 ...flags-tracing.txt => irqflags-tracing.rst} |    2 +
 Documentation/{isa.txt => isa.rst}            |    2 +
 Documentation/{isapnp.txt => isapnp.rst}      |    2 +
 ...eaders_install.txt => headers_install.rst} |    5 +-
 Documentation/kbuild/index.rst                |   27 +
 Documentation/kbuild/issues.rst               |   11 +
 .../kbuild/{kbuild.txt => kbuild.rst}         |  119 +-
 ...nfig-language.txt => kconfig-language.rst} |  232 +-
 ...anguage.txt => kconfig-macro-language.rst} |   37 +-
 .../kbuild/{kconfig.txt => kconfig.rst}       |  136 +-
 .../kbuild/{makefiles.txt => makefiles.rst}   |  518 ++--
 .../kbuild/{modules.txt => modules.rst}       |  168 +-
 Documentation/kdump/index.rst                 |   21 +
 Documentation/kdump/{kdump.txt => kdump.rst}  |  131 +-
 .../kdump/{vmcoreinfo.txt => vmcoreinfo.rst}  |   59 +-
 Documentation/kernel-hacking/hacking.rst      |    4 +-
 Documentation/kernel-hacking/locking.rst      |    2 +-
 ...hreads.txt => kernel-per-CPU-kthreads.rst} |    6 +-
 Documentation/{kobject.txt => kobject.rst}    |    4 +-
 Documentation/{kprobes.txt => kprobes.rst}    |    2 +
 Documentation/{kref.txt => kref.rst}          |    2 +
 .../{asus-laptop.txt => asus-laptop.rst}      |   91 +-
 ...otection.txt => disk-shock-protection.rst} |   32 +-
 Documentation/laptops/index.rst               |   17 +
 .../{laptop-mode.txt => laptop-mode.rst}      |  509 ++--
 .../{sony-laptop.txt => sony-laptop.rst}      |   58 +-
 .../laptops/{sonypi.txt => sonypi.rst}        |   28 +-
 .../{thinkpad-acpi.txt => thinkpad-acpi.rst}  |  373 ++-
 .../{toshiba_haps.txt => toshiba_haps.rst}    |   47 +-
 Documentation/{ldm.txt => ldm.rst}            |    2 +
 Documentation/leds/index.rst                  |   25 +
 .../leds/{leds-blinkm.txt => leds-blinkm.rst} |   63 +-
 ...s-class-flash.txt => leds-class-flash.rst} |   49 +-
 .../leds/{leds-class.txt => leds-class.rst}   |   15 +-
 .../leds/{leds-lm3556.txt => leds-lm3556.rst} |  100 +-
 .../leds/{leds-lp3944.txt => leds-lp3944.rst} |   23 +-
 Documentation/leds/leds-lp5521.rst            |  115 +
 Documentation/leds/leds-lp5521.txt            |  101 -
 Documentation/leds/leds-lp5523.rst            |  147 +
 Documentation/leds/leds-lp5523.txt            |  130 -
 Documentation/leds/leds-lp5562.rst            |  137 +
 Documentation/leds/leds-lp5562.txt            |  120 -
 Documentation/leds/leds-lp55xx.rst            |  224 ++
 Documentation/leds/leds-lp55xx.txt            |  194 --
 Documentation/leds/leds-mlxcpld.rst           |  118 +
 Documentation/leds/leds-mlxcpld.txt           |  110 -
 ...edtrig-oneshot.txt => ledtrig-oneshot.rst} |   11 +-
 ...ig-transient.txt => ledtrig-transient.rst} |   63 +-
 ...edtrig-usbport.txt => ledtrig-usbport.rst} |   11 +-
 Documentation/leds/{uleds.txt => uleds.rst}   |    5 +-
 .../{callbacks.txt => callbacks.rst}          |   12 +-
 ...ive-patches.txt => cumulative-patches.rst} |   14 +-
 Documentation/livepatch/index.rst             |   21 +
 .../{livepatch.txt => livepatch.rst}          |   60 +-
 ...e-elf-format.txt => module-elf-format.rst} |  211 +-
 .../{shadow-vars.txt => shadow-vars.rst}      |   65 +-
 Documentation/locking/index.rst               |   24 +
 ...{lockdep-design.txt => lockdep-design.rst} |   41 +-
 Documentation/locking/lockstat.rst            |  204 ++
 Documentation/locking/lockstat.txt            |  183 --
 .../{locktorture.txt => locktorture.rst}      |  105 +-
 .../{mutex-design.txt => mutex-design.rst}    |   26 +-
 ...t-mutex-design.txt => rt-mutex-design.rst} |  139 +-
 .../locking/{rt-mutex.txt => rt-mutex.rst}    |   32 +-
 .../locking/{spinlocks.txt => spinlocks.rst}  |   32 +-
 ...w-mutex-design.txt => ww-mutex-design.rst} |   82 +-
 ...kup-watchdogs.txt => lockup-watchdogs.rst} |    2 +
 Documentation/{lsm.txt => lsm.rst}            |    2 +
 Documentation/{lzo.txt => lzo.rst}            |    2 +
 Documentation/m68k/index.rst                  |   17 +
 ...{kernel-options.txt => kernel-options.rst} |  319 +-
 Documentation/{mailbox.txt => mailbox.rst}    |    2 +
 Documentation/md/index.rst                    |   12 +
 .../md/{md-cluster.txt => md-cluster.rst}     |  188 +-
 .../md/{raid5-cache.txt => raid5-cache.rst}   |   28 +-
 .../md/{raid5-ppl.txt => raid5-ppl.rst}       |    2 +
 Documentation/memory-barriers.txt             |    6 +-
 .../{ti-emif.txt => ti-emif.rst}              |   27 +-
 ...hameleon-bus.txt => men-chameleon-bus.rst} |    2 +
 Documentation/mic/index.rst                   |   18 +
 .../{mic_overview.txt => mic_overview.rst}    |    6 +-
 .../{scif_overview.txt => scif_overview.rst}  |   58 +-
 Documentation/mmc/index.rst                   |   13 +
 .../{mmc-async-req.txt => mmc-async-req.rst}  |   53 +-
 .../{mmc-dev-attrs.txt => mmc-dev-attrs.rst}  |   32 +-
 .../{mmc-dev-parts.txt => mmc-dev-parts.rst}  |   13 +-
 .../mmc/{mmc-tools.txt => mmc-tools.rst}      |    5 +-
 Documentation/mtd/index.rst                   |   12 +
 .../mtd/{intel-spi.txt => intel-spi.rst}      |   46 +-
 .../mtd/{nand_ecc.txt => nand_ecc.rst}        |  481 +--
 .../mtd/{spi-nor.txt => spi-nor.rst}          |    7 +-
 ...bility-list.txt => compatibility-list.rst} |    9 +-
 Documentation/namespaces/index.rst            |   11 +
 ...ource-control.txt => resource-control.rst} |    4 +
 .../{cipso_ipv4.txt => cipso_ipv4.rst}        |   19 +-
 Documentation/netlabel/draft_ietf.rst         |    5 +
 Documentation/netlabel/index.rst              |   21 +
 .../{introduction.txt => introduction.rst}    |   16 +-
 .../{lsm_interface.txt => lsm_interface.rst}  |   16 +-
 Documentation/networking/ip-sysctl.txt        |    2 +-
 Documentation/networking/scaling.rst          |    4 +-
 Documentation/networking/timestamping.txt     |    2 +-
 Documentation/nfc/index.rst                   |   11 +
 .../nfc/{nfc-hci.txt => nfc-hci.rst}          |  163 +-
 .../nfc/{nfc-pn544.txt => nfc-pn544.rst}      |    6 +-
 .../{nommu-mmap.txt => nommu-mmap.rst}        |    2 +
 Documentation/{ntb.txt => ntb.rst}            |    2 +
 Documentation/{numastat.txt => numastat.rst}  |    2 +
 Documentation/nvdimm/{btt.txt => btt.rst}     |  139 +-
 Documentation/nvdimm/index.rst                |   12 +
 .../nvdimm/{nvdimm.txt => nvdimm.rst}         |  518 ++--
 .../nvdimm/{security.txt => security.rst}     |    4 +-
 Documentation/nvmem/{nvmem.txt => nvmem.rst}  |  112 +-
 Documentation/{padata.txt => padata.rst}      |    2 +
 ...port-lowlevel.txt => parport-lowlevel.rst} |    2 +
 .../{devicetable.txt => devicetable.rst}      |    4 +
 ...{driver-changes.txt => driver-changes.rst} |   35 +-
 .../pcmcia/{driver.txt => driver.rst}         |   18 +-
 Documentation/pcmcia/index.rst                |   20 +
 .../pcmcia/{locking.txt => locking.rst}       |   39 +-
 ...-semaphore.txt => percpu-rw-semaphore.rst} |    2 +
 .../perf/{arm-ccn.txt => arm-ccn.rst}         |   18 +-
 .../perf/{arm_dsu_pmu.txt => arm_dsu_pmu.rst} |    5 +-
 .../perf/{hisi-pmu.txt => hisi-pmu.rst}       |   35 +-
 Documentation/perf/index.rst                  |   16 +
 .../perf/{qcom_l2_pmu.txt => qcom_l2_pmu.rst} |    3 +-
 .../perf/{qcom_l3_pmu.txt => qcom_l3_pmu.rst} |    3 +-
 .../{thunderx2-pmu.txt => thunderx2-pmu.rst}  |   25 +-
 .../perf/{xgene-pmu.txt => xgene-pmu.rst}     |    3 +-
 Documentation/{phy.txt => phy.rst}            |    2 +
 .../{samsung-usb2.txt => samsung-usb2.rst}    |   62 +-
 Documentation/{pi-futex.txt => pi-futex.rst}  |    4 +-
 Documentation/{pnp.txt => pnp.rst}            |    2 +
 .../power/{apm-acpi.txt => apm-acpi.rst}      |   10 +-
 ...m-debugging.txt => basic-pm-debugging.rst} |   79 +-
 ...harger-manager.txt => charger-manager.rst} |  101 +-
 ...rivers-testing.txt => drivers-testing.rst} |   15 +-
 .../{energy-model.txt => energy-model.rst}    |  101 +-
 ...ing-of-tasks.txt => freezing-of-tasks.rst} |   91 +-
 Documentation/power/index.rst                 |   46 +
 .../power/{interface.txt => interface.rst}    |   24 +-
 Documentation/power/{opp.txt => opp.rst}      |  175 +-
 Documentation/power/{pci.txt => pci.rst}      |   87 +-
 ...qos_interface.txt => pm_qos_interface.rst} |  127 +-
 Documentation/power/power_supply_class.rst    |  282 ++
 Documentation/power/power_supply_class.txt    |  231 --
 Documentation/power/powercap/powercap.rst     |  257 ++
 Documentation/power/powercap/powercap.txt     |  236 --
 .../regulator/{consumer.txt => consumer.rst}  |  141 +-
 .../regulator/{design.txt => design.rst}      |    9 +-
 .../regulator/{machine.txt => machine.rst}    |   47 +-
 .../regulator/{overview.txt => overview.rst}  |   57 +-
 Documentation/power/regulator/regulator.rst   |   32 +
 Documentation/power/regulator/regulator.txt   |   30 -
 .../power/{runtime_pm.txt => runtime_pm.rst}  |  234 +-
 Documentation/power/{s2ram.txt => s2ram.rst}  |   20 +-
 ...hotplug.txt => suspend-and-cpuhotplug.rst} |   42 +-
 ...errupts.txt => suspend-and-interrupts.rst} |    2 +
 ...ap-files.txt => swsusp-and-swap-files.rst} |   17 +-
 ...{swsusp-dmcrypt.txt => swsusp-dmcrypt.rst} |  120 +-
 Documentation/power/swsusp.rst                |  501 ++++
 Documentation/power/swsusp.txt                |  446 ---
 .../power/{tricks.txt => tricks.rst}          |    6 +-
 ...serland-swsusp.txt => userland-swsusp.rst} |   55 +-
 Documentation/power/{video.txt => video.rst}  |  156 +-
 .../{bootwrapper.txt => bootwrapper.rst}      |   28 +-
 .../{cpu_families.txt => cpu_families.rst}    |   23 +-
 .../{cpu_features.txt => cpu_features.rst}    |    6 +-
 Documentation/powerpc/{cxl.txt => cxl.rst}    |   46 +-
 .../powerpc/{cxlflash.txt => cxlflash.rst}    |   10 +-
 .../{DAWR-POWER9.txt => dawr-power9.rst}      |   10 +-
 Documentation/powerpc/{dscr.txt => dscr.rst}  |   18 +-
 ...ecovery.txt => eeh-pci-error-recovery.rst} |  108 +-
 ...ed-dump.txt => firmware-assisted-dump.rst} |  119 +-
 Documentation/powerpc/{hvcs.txt => hvcs.rst}  |  108 +-
 Documentation/powerpc/index.rst               |   34 +
 Documentation/powerpc/isa-versions.rst        |   13 +-
 .../powerpc/{mpc52xx.txt => mpc52xx.rst}      |   12 +-
 ...nv.txt => pci_iov_resource_on_powernv.rst} |   15 +-
 .../powerpc/{pmu-ebb.txt => pmu-ebb.rst}      |    1 +
 Documentation/powerpc/ptrace.rst              |  156 +
 Documentation/powerpc/ptrace.txt              |  151 -
 .../{qe_firmware.txt => qe_firmware.rst}      |   37 +-
 .../{syscall64-abi.txt => syscall64-abi.rst}  |   29 +-
 ...al_memory.txt => transactional_memory.rst} |   45 +-
 ...reempt-locking.txt => preempt-locking.rst} |    2 +
 Documentation/process/4.Coding.rst            |    2 +-
 Documentation/process/coding-style.rst        |    2 +-
 Documentation/process/submit-checklist.rst    |    4 +-
 Documentation/process/submitting-drivers.rst  |    2 +-
 Documentation/pti/pti_intel_mid.rst           |  106 +
 Documentation/pti/pti_intel_mid.txt           |   99 -
 Documentation/{pwm.txt => pwm.rst}            |    2 +
 Documentation/rapidio/index.rst               |   15 +
 .../{mport_cdev.txt => mport_cdev.rst}        |   47 +-
 .../rapidio/{rapidio.txt => rapidio.rst}      |   39 +-
 .../rapidio/{rio_cm.txt => rio_cm.rst}        |   66 +-
 .../rapidio/{sysfs.txt => sysfs.rst}          |    4 +
 .../rapidio/{tsi721.txt => tsi721.rst}        |   45 +-
 Documentation/{rbtree.txt => rbtree.rst}      |    8 +-
 .../{remoteproc.txt => remoteproc.rst}        |    4 +-
 Documentation/{rfkill.txt => rfkill.rst}      |    2 +
 Documentation/riscv/index.rst                 |   17 +
 Documentation/riscv/{pmu.txt => pmu.rst}      |   98 +-
 ...ust-futex-ABI.txt => robust-futex-ABI.rst} |    2 +
 ...{robust-futexes.txt => robust-futexes.rst} |    2 +
 Documentation/{rpmsg.txt => rpmsg.rst}        |    2 +
 Documentation/{rtc.txt => rtc.rst}            |    2 +
 Documentation/s390/{3270.txt => 3270.rst}     |   85 +-
 Documentation/s390/Debugging390.txt           | 2142 --------------
 Documentation/s390/{cds.txt => cds.rst}       |  354 ++-
 .../s390/{CommonIO => common_io.rst}          |   49 +-
 Documentation/s390/{DASD => dasd.rst}         |   33 +-
 Documentation/s390/debugging390.rst           | 2613 +++++++++++++++++
 .../{driver-model.txt => driver-model.rst}    |  179 +-
 Documentation/s390/index.rst                  |   30 +
 .../s390/{monreader.txt => monreader.rst}     |   85 +-
 Documentation/s390/{qeth.txt => qeth.rst}     |   36 +-
 Documentation/s390/s390dbf.rst                |  133 +
 Documentation/s390/s390dbf.txt                |  667 -----
 Documentation/s390/text_files.rst             |   11 +
 .../s390/{vfio-ap.txt => vfio-ap.rst}         |  487 +--
 .../s390/{vfio-ccw.txt => vfio-ccw.rst}       |   96 +-
 .../s390/{zfcpdump.txt => zfcpdump.rst}       |    2 +
 .../{completion.txt => completion.rst}        |   38 +-
 Documentation/scheduler/index.rst             |   29 +
 .../{sched-arch.txt => sched-arch.rst}        |   18 +-
 .../{sched-bwc.txt => sched-bwc.rst}          |   30 +-
 ...{sched-deadline.txt => sched-deadline.rst} |  297 +-
 ...ed-design-CFS.txt => sched-design-CFS.rst} |   17 +-
 .../{sched-domains.txt => sched-domains.rst}  |    8 +-
 .../{sched-energy.txt => sched-energy.rst}    |   53 +-
 ...-nice-design.txt => sched-nice-design.rst} |    6 +-
 ...{sched-rt-group.txt => sched-rt-group.rst} |   30 +-
 .../{sched-stats.txt => sched-stats.rst}      |   35 +-
 Documentation/scheduler/text_files.rst        |    5 +
 .../{xen-tpmfront.txt => xen-tpmfront.rst}    |  103 +-
 .../{README.cycladesZ => cyclades_z.rst}      |    5 +-
 Documentation/serial/{driver => driver.rst}   |  115 +-
 Documentation/serial/index.rst                |   32 +
 Documentation/serial/moxa-smartio             |  523 ----
 Documentation/serial/moxa-smartio.rst         |  615 ++++
 Documentation/serial/n_gsm.rst                |  103 +
 Documentation/serial/n_gsm.txt                |   96 -
 .../serial/{rocket.txt => rocket.rst}         |  144 +-
 ...{serial-iso7816.txt => serial-iso7816.rst} |   21 +-
 .../{serial-rs485.txt => serial-rs485.rst}    |   22 +-
 Documentation/serial/{tty.txt => tty.rst}     |  111 +-
 Documentation/{sgi-ioc4.txt => sgi-ioc4.rst}  |    2 +
 Documentation/{siphash.txt => siphash.rst}    |    2 +
 .../{smsc_ece1099.txt => smsc_ece1099.rst}    |    2 +
 Documentation/sparc/{adi.txt => adi.rst}      |  174 +-
 .../sparc/{console.txt => console.rst}        |    4 +-
 Documentation/sparc/index.rst                 |   13 +
 .../oradax/{oracle-dax.txt => oracle-dax.rst} |   58 +-
 .../{speculation.txt => speculation.rst}      |    2 +
 .../{static-keys.txt => static-keys.rst}      |    2 +
 Documentation/{svga.txt => svga.rst}          |    2 +
 .../{switchtec.txt => switchtec.rst}          |    4 +-
 .../{sync_file.txt => sync_file.rst}          |    2 +
 Documentation/sysctl/abi.rst                  |   67 +
 Documentation/sysctl/abi.txt                  |   54 -
 Documentation/sysctl/{fs.txt => fs.rst}       |  141 +-
 Documentation/sysctl/{README => index.rst}    |   36 +-
 .../sysctl/{kernel.txt => kernel.rst}         |  378 +--
 Documentation/sysctl/{net.txt => net.rst}     |  141 +-
 .../sysctl/{sunrpc.txt => sunrpc.rst}         |   13 +-
 Documentation/sysctl/{user.txt => user.rst}   |   32 +-
 Documentation/sysctl/{vm.txt => vm.rst}       |  264 +-
 Documentation/target/index.rst                |   19 +
 Documentation/target/scripts.rst              |   11 +
 Documentation/target/tcm_mod_builder.rst      |  149 +
 Documentation/target/tcm_mod_builder.txt      |  145 -
 .../{tcmu-design.txt => tcmu-design.rst}      |  268 +-
 Documentation/{tee.txt => tee.rst}            |    2 +
 ...pu-cooling-api.txt => cpu-cooling-api.rst} |   39 +-
 .../{exynos_thermal => exynos_thermal.rst}    |   47 +-
 .../thermal/exynos_thermal_emulation          |   53 -
 .../thermal/exynos_thermal_emulation.rst      |   61 +
 Documentation/thermal/index.rst               |   18 +
 ...el_powerclamp.txt => intel_powerclamp.rst} |  177 +-
 .../{nouveau_thermal => nouveau_thermal.rst}  |   54 +-
 ...ower_allocator.txt => power_allocator.rst} |  140 +-
 .../thermal/{sysfs-api.txt => sysfs-api.rst}  |  490 ++--
 ...hermal => x86_pkg_temperature_thermal.rst} |   28 +-
 .../{this_cpu_ops.txt => this_cpu_ops.rst}    |    2 +
 .../timers/{highres.txt => highres.rst}       |   13 +-
 Documentation/timers/{hpet.txt => hpet.rst}   |    4 +-
 .../timers/{hrtimers.txt => hrtimers.rst}     |    6 +-
 Documentation/timers/index.rst                |   22 +
 Documentation/timers/{NO_HZ.txt => no_hz.rst} |   40 +-
 .../{timekeeping.txt => timekeeping.rst}      |    3 +-
 .../{timers-howto.txt => timers-howto.rst}    |   15 +-
 Documentation/trace/coresight-cpu-debug.txt   |    2 +-
 Documentation/trace/ftrace.rst                |    1 +
 Documentation/trace/histogram.rst             |   86 +-
 Documentation/trace/kprobetrace.rst           |    2 +-
 .../it_IT/kernel-hacking/hacking.rst          |    4 +-
 .../it_IT/kernel-hacking/locking.rst          |    2 +-
 .../translations/it_IT/process/4.Coding.rst   |    2 +-
 .../it_IT/process/submit-checklist.rst        |    4 +-
 .../translations/ko_KR/memory-barriers.txt    |    6 +-
 Documentation/translations/zh_CN/IRQ.txt      |    4 +-
 Documentation/translations/zh_CN/arm/Booting  |    4 +-
 .../zh_CN/arm/kernel_user_helpers.txt         |    4 +-
 .../translations/zh_CN/arm64/booting.txt      |    4 +-
 .../zh_CN/arm64/legacy_instructions.txt       |    4 +-
 .../translations/zh_CN/arm64/memory.txt       |    4 +-
 .../zh_CN/arm64/silicon-errata.txt            |    4 +-
 .../zh_CN/arm64/tagged-pointers.txt           |    4 +-
 .../translations/zh_CN/filesystems/sysfs.txt  |    2 +-
 .../translations/zh_CN/io_ordering.txt        |    4 +-
 .../translations/zh_CN/oops-tracing.txt       |    2 +-
 .../translations/zh_CN/process/4.Coding.rst   |    2 +-
 .../zh_CN/process/coding-style.rst            |    2 +-
 .../zh_CN/process/submit-checklist.rst        |    4 +-
 .../zh_CN/process/submitting-drivers.rst      |    2 +-
 ...access.txt => unaligned-memory-access.rst} |    2 +
 ...ed-device.txt => vfio-mediated-device.rst} |    4 +-
 Documentation/{vfio.txt => vfio.rst}          |    2 +
 .../{video-output.txt => video-output.rst}    |    2 +
 Documentation/virtual/kvm/api.txt             |    2 +-
 Documentation/vm/numa.rst                     |    6 +-
 Documentation/vm/page_migration.rst           |    2 +-
 Documentation/vm/unevictable-lru.rst          |    4 +-
 ....txt => convert_drivers_to_kernel_api.rst} |  109 +-
 .../watchdog/{hpwdt.txt => hpwdt.rst}         |   27 +-
 Documentation/watchdog/index.rst              |   25 +
 .../watchdog/{mlx-wdt.txt => mlx-wdt.rst}     |   24 +-
 .../{pcwd-watchdog.txt => pcwd-watchdog.rst}  |   13 +-
 .../{watchdog-api.txt => watchdog-api.rst}    |   76 +-
 ...kernel-api.txt => watchdog-kernel-api.rst} |   91 +-
 .../watchdog/watchdog-parameters.rst          |  736 +++++
 .../watchdog/watchdog-parameters.txt          |  410 ---
 .../{watchdog-pm.txt => watchdog-pm.rst}      |    3 +
 Documentation/watchdog/{wdt.txt => wdt.rst}   |   31 +-
 Documentation/x86/topology.txt                |    2 +-
 .../x86/x86_64/fake-numa-for-cpusets          |    4 +-
 Documentation/xilinx/{eemi.txt => eemi.rst}   |    8 +-
 Documentation/xilinx/index.rst                |   17 +
 Documentation/{xillybus.txt => xillybus.rst}  |    2 +
 .../xtensa/{atomctl.txt => atomctl.rst}       |   13 +-
 .../xtensa/{booting.txt => booting.rst}       |    5 +-
 Documentation/xtensa/index.rst                |   12 +
 Documentation/xtensa/mmu.rst                  |  195 ++
 Documentation/xtensa/mmu.txt                  |  189 --
 Documentation/{xz.txt => xz.rst}              |    2 +
 Documentation/{zorro.txt => zorro.rst}        |    2 +
 Kconfig                                       |    2 +-
 MAINTAINERS                                   |  132 +-
 arch/Kconfig                                  |    4 +-
 arch/arc/plat-eznps/Kconfig                   |    2 +-
 arch/arm/Kconfig                              |    8 +-
 arch/arm/common/mcpm_entry.c                  |    2 +-
 arch/arm/common/mcpm_head.S                   |    2 +-
 arch/arm/common/vlock.S                       |    2 +-
 arch/arm/include/asm/setup.h                  |    2 +-
 arch/arm/include/uapi/asm/setup.h             |    2 +-
 arch/arm/kernel/entry-armv.S                  |    2 +-
 arch/arm/mach-exynos/common.h                 |    2 +-
 arch/arm/mach-ixp4xx/Kconfig                  |   14 +-
 arch/arm/mach-s3c24xx/pm.c                    |    2 +-
 arch/arm/mm/Kconfig                           |    4 +-
 arch/arm/plat-samsung/Kconfig                 |    6 +-
 arch/arm/tools/mach-types                     |    2 +-
 arch/arm64/Kconfig                            |    2 +-
 arch/arm64/include/asm/efi.h                  |    2 +-
 arch/arm64/include/asm/image.h                |    2 +-
 arch/arm64/include/uapi/asm/sigcontext.h      |    2 +-
 arch/arm64/kernel/kexec_image.c               |    2 +-
 arch/arm64/kernel/kuser32.S                   |    2 +-
 arch/c6x/Kconfig                              |    2 +-
 arch/ia64/hp/common/sba_iommu.c               |   12 +-
 arch/ia64/kernel/efi.c                        |    2 +-
 arch/ia64/kernel/fsys.S                       |    2 +-
 arch/ia64/mm/ioremap.c                        |    2 +-
 arch/ia64/pci/pci.c                           |    2 +-
 arch/ia64/sn/pci/pci_dma.c                    |    4 +-
 arch/m68k/q40/README                          |    2 +-
 arch/microblaze/Kconfig.debug                 |    2 +-
 arch/microblaze/Kconfig.platform              |    2 +-
 arch/mips/bmips/setup.c                       |    2 +-
 arch/nds32/Kconfig                            |    2 +-
 arch/openrisc/Kconfig                         |    2 +-
 arch/parisc/Kconfig                           |    2 +-
 arch/parisc/kernel/pci-dma.c                  |    2 +-
 arch/powerpc/kernel/exceptions-64s.S          |    2 +-
 arch/powerpc/sysdev/Kconfig                   |    2 +-
 arch/riscv/Kconfig                            |    2 +-
 arch/s390/Kconfig                             |    4 +-
 arch/s390/include/asm/debug.h                 |  235 +-
 arch/sh/Kconfig                               |    4 +-
 arch/sparc/Kconfig                            |    2 +-
 arch/unicore32/include/asm/io.h               |    2 +-
 arch/x86/Kconfig                              |   10 +-
 arch/x86/include/asm/dma-mapping.h            |    4 +-
 arch/x86/kernel/amd_gart_64.c                 |    2 +-
 arch/xtensa/include/asm/initialize_mmu.h      |    2 +-
 block/Kconfig                                 |    4 +-
 block/Kconfig.iosched                         |    2 +-
 block/bfq-iosched.c                           |    2 +-
 block/blk-integrity.c                         |    2 +-
 block/ioprio.c                                |    2 +-
 block/mq-deadline.c                           |    2 +-
 block/partitions/Kconfig                      |    2 +-
 block/partitions/cmdline.c                    |    2 +-
 drivers/auxdisplay/Kconfig                    |    2 +-
 drivers/base/core.c                           |    2 +-
 drivers/base/platform.c                       |    2 +-
 drivers/block/Kconfig                         |   10 +-
 drivers/block/floppy.c                        |    2 +-
 drivers/block/zram/Kconfig                    |    6 +-
 drivers/cdrom/cdrom.c                         |    2 +-
 drivers/char/Kconfig                          |    6 +-
 drivers/char/hw_random/core.c                 |    2 +-
 drivers/char/ipmi/Kconfig                     |    2 +-
 drivers/char/ipmi/ipmi_si_hotmod.c            |    2 +-
 drivers/char/ipmi/ipmi_si_intf.c              |    2 +-
 drivers/cpufreq/Kconfig.x86                   |    2 +-
 drivers/crypto/sunxi-ss/sun4i-ss-cipher.c     |    2 +-
 drivers/crypto/sunxi-ss/sun4i-ss-core.c       |    2 +-
 drivers/crypto/sunxi-ss/sun4i-ss-hash.c       |    2 +-
 drivers/crypto/sunxi-ss/sun4i-ss.h            |    2 +-
 drivers/dma-buf/Kconfig                       |    2 +-
 drivers/firmware/Kconfig                      |    2 +-
 drivers/gpio/Kconfig                          |    2 +-
 drivers/gpio/gpio-cs5535.c                    |    2 +-
 drivers/gpu/drm/Kconfig                       |    2 +-
 drivers/gpu/drm/drm_ioctl.c                   |    2 +-
 drivers/gpu/drm/drm_modeset_lock.c            |    2 +-
 drivers/gpu/drm/i915/i915_drv.h               |    2 +-
 drivers/ide/Kconfig                           |   20 +-
 drivers/ide/ide-cd.c                          |    2 +-
 drivers/iio/Kconfig                           |    2 +-
 drivers/infiniband/core/user_mad.c            |    2 +-
 drivers/infiniband/ulp/ipoib/Kconfig          |    2 +-
 drivers/input/touchscreen/sun4i-ts.c          |    2 +-
 drivers/leds/trigger/Kconfig                  |    2 +-
 drivers/leds/trigger/ledtrig-transient.c      |    2 +-
 drivers/md/Kconfig                            |    2 +-
 drivers/md/dm-init.c                          |    2 +-
 drivers/md/dm-raid.c                          |    2 +-
 drivers/media/usb/dvb-usb-v2/anysee.c         |    2 +-
 drivers/misc/lkdtm/core.c                     |    2 +-
 drivers/mtd/devices/Kconfig                   |    2 +-
 drivers/mtd/nand/raw/nand_ecc.c               |    2 +-
 drivers/net/ethernet/intel/ice/ice_main.c     |    2 +-
 drivers/net/ethernet/smsc/Kconfig             |    6 +-
 drivers/net/wireless/intel/iwlegacy/Kconfig   |    4 +-
 drivers/net/wireless/intel/iwlwifi/Kconfig    |    2 +-
 drivers/nvdimm/Kconfig                        |    2 +-
 drivers/opp/Kconfig                           |    2 +-
 drivers/parisc/sba_iommu.c                    |   16 +-
 drivers/parport/Kconfig                       |    2 +-
 drivers/pci/switch/Kconfig                    |    2 +-
 drivers/pcmcia/ds.c                           |    2 +-
 drivers/perf/qcom_l3_pmu.c                    |    2 +-
 drivers/platform/x86/Kconfig                  |    8 +-
 drivers/platform/x86/dcdbas.c                 |    2 +-
 drivers/platform/x86/dell_rbu.c               |    2 +-
 drivers/pnp/isapnp/Kconfig                    |    2 +-
 drivers/power/supply/power_supply_core.c      |    2 +-
 drivers/rapidio/Kconfig                       |    2 +-
 drivers/regulator/core.c                      |    2 +-
 drivers/s390/char/zcore.c                     |    2 +-
 drivers/sbus/char/oradax.c                    |    2 +-
 drivers/scsi/Kconfig                          |    4 +-
 drivers/soc/fsl/qe/qe.c                       |    2 +-
 drivers/staging/sm750fb/Kconfig               |    2 +-
 drivers/tty/Kconfig                           |    8 +-
 drivers/tty/hvc/hvcs.c                        |    2 +-
 drivers/tty/serial/Kconfig                    |    2 +-
 drivers/tty/serial/ucc_uart.c                 |    2 +-
 drivers/usb/misc/Kconfig                      |    4 +-
 drivers/vfio/Kconfig                          |    2 +-
 drivers/vfio/mdev/Kconfig                     |    2 +-
 drivers/video/fbdev/Kconfig                   |   38 +-
 drivers/video/fbdev/matrox/matroxfb_base.c    |    2 +-
 drivers/video/fbdev/pxafb.c                   |    2 +-
 drivers/video/fbdev/sh7760fb.c                |    2 +-
 drivers/w1/Kconfig                            |    2 +-
 drivers/watchdog/Kconfig                      |    6 +-
 drivers/watchdog/smsc37b787_wdt.c             |    2 +-
 include/asm-generic/bitops/atomic.h           |    2 +-
 include/linux/cgroup-defs.h                   |    2 +-
 include/linux/connector.h                     |   63 +-
 include/linux/dma-mapping.h                   |    2 +-
 include/linux/fault-inject.h                  |    2 +-
 include/linux/hw_random.h                     |    2 +-
 include/linux/interrupt.h                     |    2 +-
 include/linux/io-mapping.h                    |    2 +-
 include/linux/iopoll.h                        |    4 +-
 include/linux/jump_label.h                    |    2 +-
 include/linux/kobject.h                       |    2 +-
 include/linux/kobject_ns.h                    |    2 +-
 include/linux/lockdep.h                       |    2 +-
 include/linux/mutex.h                         |    2 +-
 include/linux/pm.h                            |    2 +-
 include/linux/rbtree.h                        |    2 +-
 include/linux/rbtree_augmented.h              |    2 +-
 include/linux/regmap.h                        |    4 +-
 include/linux/rwsem.h                         |    2 +-
 include/linux/serial_core.h                   |    2 +-
 include/linux/thermal.h                       |    4 +-
 include/media/videobuf-dma-sg.h               |    2 +-
 include/pcmcia/ds.h                           |    2 +-
 include/pcmcia/ss.h                           |    2 +-
 include/soc/fsl/qe/qe.h                       |    2 +-
 include/uapi/linux/bpf.h                      |    2 +-
 include/uapi/rdma/rdma_user_ioctl_cmds.h      |    2 +-
 init/Kconfig                                  |   12 +-
 kernel/cgroup/cpuset.c                        |    2 +-
 kernel/dma/debug.c                            |    2 +-
 kernel/locking/mutex.c                        |    2 +-
 kernel/locking/rtmutex.c                      |    2 +-
 kernel/padata.c                               |    2 +-
 kernel/panic.c                                |    2 +-
 kernel/power/Kconfig                          |    6 +-
 kernel/sched/deadline.c                       |    2 +-
 lib/Kconfig                                   |    2 +-
 lib/Kconfig.debug                             |    8 +-
 lib/crc32.c                                   |    2 +-
 lib/kobject.c                                 |    4 +-
 lib/lzo/lzo1x_decompress_safe.c               |    2 +-
 lib/xz/Kconfig                                |    2 +-
 mm/Kconfig                                    |    2 +-
 mm/nommu.c                                    |    2 +-
 mm/swap.c                                     |    2 +-
 net/bridge/netfilter/Kconfig                  |    2 +-
 net/ipv4/netfilter/Kconfig                    |    2 +-
 net/ipv6/netfilter/Kconfig                    |    2 +-
 net/netfilter/Kconfig                         |   18 +-
 net/tipc/Kconfig                              |    2 +-
 net/wireless/Kconfig                          |    2 +-
 samples/Kconfig                               |    2 +-
 samples/kprobes/kprobe_example.c              |    2 +-
 samples/kprobes/kretprobe_example.c           |    2 +-
 scripts/Kbuild.include                        |    4 +-
 scripts/Makefile.host                         |    2 +-
 scripts/checkpatch.pl                         |    8 +-
 scripts/coccinelle/free/devm_free.cocci       |    2 +-
 scripts/documentation-file-ref-check          |    5 +-
 scripts/gcc-plugins/Kconfig                   |    2 +-
 scripts/kconfig/symbol.c                      |    2 +-
 .../tests/err_recursive_dep/expected_stderr   |   14 +-
 security/Kconfig                              |    2 +-
 security/device_cgroup.c                      |    2 +-
 sound/oss/dmasound/Kconfig                    |    6 +-
 tools/include/linux/rbtree.h                  |    2 +-
 tools/include/linux/rbtree_augmented.h        |    2 +-
 tools/include/uapi/linux/bpf.h                |    2 +-
 .../Documentation/stack-validation.txt        |    2 +-
 tools/testing/fault-injection/failcmd.sh      |    2 +-
 tools/testing/selftests/zram/README           |    2 +-
 usr/Kconfig                                   |    2 +-
 961 files changed, 31818 insertions(+), 24040 deletions(-)
 rename Documentation/{DMA-API-HOWTO.txt => DMA-API-HOWTO.rst} (99%)
 rename Documentation/{DMA-API.txt => DMA-API.rst} (99%)
 rename Documentation/{DMA-ISA-LPC.txt => DMA-ISA-LPC.rst} (98%)
 rename Documentation/{DMA-attributes.txt => DMA-attributes.rst} (99%)
 rename Documentation/EDID/{HOWTO.txt => howto.rst} (83%)
 rename Documentation/{IPMI.txt => IPMI.rst} (99%)
 rename Documentation/{IRQ-affinity.txt => IRQ-affinity.rst} (99%)
 rename Documentation/{IRQ-domain.txt => IRQ-domain.rst} (99%)
 rename Documentation/{IRQ.txt => IRQ.rst} (99%)
 rename Documentation/{Intel-IOMMU.txt => Intel-IOMMU.rst} (99%)
 rename Documentation/{SAK.txt => SAK.rst} (99%)
 rename Documentation/{SM501.txt => SM501.rst} (99%)
 rename Documentation/accounting/{cgroupstats.txt => cgroupstats.rst} (77%)
 rename Documentation/accounting/{delay-accounting.txt => delay-accounting.rst} (77%)
 create mode 100644 Documentation/accounting/index.rst
 rename Documentation/accounting/{psi.txt => psi.rst} (91%)
 rename Documentation/accounting/{taskstats-struct.txt => taskstats-struct.rst} (90%)
 rename Documentation/accounting/{taskstats.txt => taskstats.rst} (95%)
 rename Documentation/aoe/{aoe.txt => aoe.rst} (79%)
 create mode 100644 Documentation/aoe/examples.rst
 create mode 100644 Documentation/aoe/index.rst
 rename Documentation/aoe/{todo.txt => todo.rst} (98%)
 delete mode 100644 Documentation/arm/Marvell/README
 delete mode 100644 Documentation/arm/Netwinder
 delete mode 100644 Documentation/arm/SA1100/FreeBird
 delete mode 100644 Documentation/arm/SA1100/empeg
 delete mode 100644 Documentation/arm/SA1100/serial_UART
 rename Documentation/arm/{README => arm.rst} (88%)
 rename Documentation/arm/{Booting => booting.rst} (89%)
 rename Documentation/arm/{cluster-pm-race-avoidance.txt => cluster-pm-race-avoidance.rst} (84%)
 rename Documentation/arm/{firmware.txt => firmware.rst} (86%)
 create mode 100644 Documentation/arm/index.rst
 rename Documentation/arm/{Interrupts => interrupts.rst} (81%)
 rename Documentation/arm/{IXP4xx => ixp4xx.rst} (84%)
 rename Documentation/arm/{kernel_mode_neon.txt => kernel_mode_neon.rst} (99%)
 rename Documentation/arm/{kernel_user_helpers.txt => kernel_user_helpers.rst} (78%)
 rename Documentation/arm/keystone/{knav-qmss.txt => knav-qmss.rst} (92%)
 rename Documentation/arm/keystone/{Overview.txt => overview.rst} (59%)
 create mode 100644 Documentation/arm/marvel.rst
 rename Documentation/arm/{mem_alignment => mem_alignment.rst} (89%)
 rename Documentation/arm/{memory.txt => memory.rst} (90%)
 rename Documentation/arm/{Microchip/README => microchip.rst} (92%)
 create mode 100644 Documentation/arm/netwinder.rst
 create mode 100644 Documentation/arm/nwfpe/index.rst
 rename Documentation/arm/nwfpe/{README.FPE => netwinder-fpe.rst} (94%)
 rename Documentation/arm/nwfpe/{NOTES => notes.rst} (99%)
 rename Documentation/arm/nwfpe/{README => nwfpe.rst} (98%)
 rename Documentation/arm/nwfpe/{TODO => todo.rst} (75%)
 rename Documentation/arm/{OMAP/DSS => omap/dss.rst} (86%)
 create mode 100644 Documentation/arm/omap/index.rst
 rename Documentation/arm/{OMAP/README => omap/omap.rst} (62%)
 rename Documentation/arm/{OMAP/omap_pm => omap/omap_pm.rst} (83%)
 rename Documentation/arm/{Porting => porting.rst} (94%)
 rename Documentation/arm/pxa/{mfp.txt => mfp.rst} (83%)
 rename Documentation/arm/{SA1100/ADSBitsy => sa1100/adsbitsy.rst} (90%)
 rename Documentation/arm/{SA1100/Assabet => sa1100/assabet.rst} (62%)
 rename Documentation/arm/{SA1100/Brutus => sa1100/brutus.rst} (75%)
 rename Documentation/arm/{SA1100/CERF => sa1100/cerf.rst} (91%)
 create mode 100644 Documentation/arm/sa1100/freebird.rst
 rename Documentation/arm/{SA1100/GraphicsClient => sa1100/graphicsclient.rst} (87%)
 rename Documentation/arm/{SA1100/GraphicsMaster => sa1100/graphicsmaster.rst} (92%)
 rename Documentation/arm/{SA1100/HUW_WEBPANEL => sa1100/huw_webpanel.rst} (78%)
 create mode 100644 Documentation/arm/sa1100/index.rst
 rename Documentation/arm/{SA1100/Itsy => sa1100/itsy.rst} (88%)
 rename Documentation/arm/{SA1100/LART => sa1100/lart.rst} (90%)
 rename Documentation/arm/{SA1100/nanoEngine => sa1100/nanoengine.rst} (74%)
 rename Documentation/arm/{SA1100/Pangolin => sa1100/pangolin.rst} (81%)
 rename Documentation/arm/{SA1100/PLEB => sa1100/pleb.rst} (95%)
 create mode 100644 Documentation/arm/sa1100/serial_uart.rst
 rename Documentation/arm/{SA1100/Tifon => sa1100/tifon.rst} (88%)
 rename Documentation/arm/{SA1100/Yopy => sa1100/yopy.rst} (74%)
 rename Documentation/arm/{Samsung-S3C24XX/CPUfreq.txt => samsung-s3c24xx/cpufreq.rst} (96%)
 rename Documentation/arm/{Samsung-S3C24XX/EB2410ITX.txt => samsung-s3c24xx/eb2410itx.rst} (92%)
 rename Documentation/arm/{Samsung-S3C24XX/GPIO.txt => samsung-s3c24xx/gpio.rst} (89%)
 rename Documentation/arm/{Samsung-S3C24XX/H1940.txt => samsung-s3c24xx/h1940.rst} (94%)
 create mode 100644 Documentation/arm/samsung-s3c24xx/index.rst
 rename Documentation/arm/{Samsung-S3C24XX/NAND.txt => samsung-s3c24xx/nand.rst} (92%)
 rename Documentation/arm/{Samsung-S3C24XX/Overview.txt => samsung-s3c24xx/overview.rst} (94%)
 rename Documentation/arm/{Samsung-S3C24XX/S3C2412.txt => samsung-s3c24xx/s3c2412.rst} (96%)
 rename Documentation/arm/{Samsung-S3C24XX/S3C2413.txt => samsung-s3c24xx/s3c2413.rst} (77%)
 rename Documentation/arm/{Samsung-S3C24XX/SMDK2440.txt => samsung-s3c24xx/smdk2440.rst} (94%)
 rename Documentation/arm/{Samsung-S3C24XX/Suspend.txt => samsung-s3c24xx/suspend.rst} (94%)
 rename Documentation/arm/{Samsung-S3C24XX/USB-Host.txt => samsung-s3c24xx/usb-host.rst} (94%)
 rename Documentation/arm/{Samsung/Bootloader-interface.txt => samsung/bootloader-interface.rst} (72%)
 rename Documentation/arm/{Samsung => samsung}/clksrc-change-registers.awk (100%)
 rename Documentation/arm/{Samsung/GPIO.txt => samsung/gpio.rst} (87%)
 create mode 100644 Documentation/arm/samsung/index.rst
 rename Documentation/arm/{Samsung/Overview.txt => samsung/overview.rst} (86%)
 rename Documentation/arm/{Setup => setup.rst} (87%)
 rename Documentation/arm/{SH-Mobile => sh-mobile}/.gitignore (100%)
 rename Documentation/arm/{SPEAr/overview.txt => spear/overview.rst} (91%)
 rename Documentation/arm/sti/{overview.txt => overview.rst} (82%)
 rename Documentation/arm/sti/{stih407-overview.txt => stih407-overview.rst} (82%)
 rename Documentation/arm/sti/{stih415-overview.txt => stih415-overview.rst} (79%)
 rename Documentation/arm/sti/{stih416-overview.txt => stih416-overview.rst} (83%)
 rename Documentation/arm/sti/{stih418-overview.txt => stih418-overview.rst} (83%)
 rename Documentation/arm/{sunxi/README => sunxi.rst} (83%)
 rename Documentation/arm/sunxi/{clocks.txt => clocks.rst} (92%)
 rename Documentation/arm/{swp_emulation => swp_emulation.rst} (63%)
 rename Documentation/arm/{tcm.txt => tcm.rst} (86%)
 rename Documentation/arm/{uefi.txt => uefi.rst} (63%)
 rename Documentation/arm/{VFP/release-notes.txt => vfp/release-notes.rst} (92%)
 rename Documentation/arm/{vlocks.txt => vlocks.rst} (98%)
 rename Documentation/arm64/{acpi_object_usage.txt => acpi_object_usage.rst} (84%)
 rename Documentation/arm64/{arm-acpi.txt => arm-acpi.rst} (86%)
 rename Documentation/arm64/{booting.txt => booting.rst} (86%)
 rename Documentation/arm64/{cpu-feature-registers.txt => cpu-feature-registers.rst} (66%)
 rename Documentation/arm64/{elf_hwcaps.txt => elf_hwcaps.rst} (92%)
 rename Documentation/arm64/{hugetlbpage.txt => hugetlbpage.rst} (86%)
 create mode 100644 Documentation/arm64/index.rst
 rename Documentation/arm64/{legacy_instructions.txt => legacy_instructions.rst} (73%)
 create mode 100644 Documentation/arm64/memory.rst
 delete mode 100644 Documentation/arm64/memory.txt
 rename Documentation/arm64/{pointer-authentication.txt => pointer-authentication.rst} (98%)
 rename Documentation/arm64/{silicon-errata.txt => silicon-errata.rst} (55%)
 rename Documentation/arm64/{sve.txt => sve.rst} (98%)
 rename Documentation/arm64/{tagged-pointers.txt => tagged-pointers.rst} (94%)
 rename Documentation/{atomic_bitops.txt => atomic_bitops.rst} (99%)
 rename Documentation/auxdisplay/{lcd-panel-cgram.txt => lcd-panel-cgram.rst} (88%)
 create mode 100644 Documentation/backlight/lp855x-driver.rst
 delete mode 100644 Documentation/backlight/lp855x-driver.txt
 rename Documentation/block/{bfq-iosched.txt => bfq-iosched.rst} (95%)
 rename Documentation/block/{biodoc.txt => biodoc.rst} (83%)
 rename Documentation/block/{biovecs.txt => biovecs.rst} (92%)
 create mode 100644 Documentation/block/capability.rst
 delete mode 100644 Documentation/block/capability.txt
 rename Documentation/block/{cmdline-partition.txt => cmdline-partition.rst} (92%)
 rename Documentation/block/{data-integrity.txt => data-integrity.rst} (92%)
 rename Documentation/block/{deadline-iosched.txt => deadline-iosched.rst} (89%)
 create mode 100644 Documentation/block/index.rst
 rename Documentation/block/{ioprio.txt => ioprio.rst} (75%)
 rename Documentation/block/{kyber-iosched.txt => kyber-iosched.rst} (86%)
 rename Documentation/block/{null_blk.txt => null_blk.rst} (60%)
 rename Documentation/block/{pr.txt => pr.rst} (95%)
 rename Documentation/block/{queue-sysfs.txt => queue-sysfs.rst} (99%)
 rename Documentation/block/{request.txt => request.rst} (59%)
 rename Documentation/block/{stat.txt => stat.rst} (89%)
 rename Documentation/block/{switching-sched.txt => switching-sched.rst} (71%)
 rename Documentation/block/{writeback_cache_control.txt => writeback_cache_control.rst} (94%)
 rename Documentation/blockdev/drbd/{data-structure-v9.txt => data-structure-v9.rst} (94%)
 create mode 100644 Documentation/blockdev/drbd/figures.rst
 rename Documentation/blockdev/drbd/{README.txt => index.rst} (55%)
 rename Documentation/blockdev/{floppy.txt => floppy.rst} (81%)
 create mode 100644 Documentation/blockdev/index.rst
 rename Documentation/blockdev/{nbd.txt => nbd.rst} (96%)
 rename Documentation/blockdev/{paride.txt => paride.rst} (85%)
 rename Documentation/blockdev/{ramdisk.txt => ramdisk.rst} (84%)
 rename Documentation/blockdev/{zram.txt => zram.rst} (76%)
 rename Documentation/{bt8xxgpio.txt => bt8xxgpio.rst} (99%)
 rename Documentation/{btmrvl.txt => btmrvl.rst} (99%)
 rename Documentation/bus-devices/{ti-gpmc.txt => ti-gpmc.rst} (58%)
 rename Documentation/{bus-virt-phys-mapping.txt => bus-virt-phys-mapping.rst} (99%)
 delete mode 100644 Documentation/cdrom/Makefile
 create mode 100644 Documentation/cdrom/cdrom-standard.rst
 delete mode 100644 Documentation/cdrom/cdrom-standard.tex
 rename Documentation/cdrom/{ide-cd => ide-cd.rst} (82%)
 create mode 100644 Documentation/cdrom/index.rst
 rename Documentation/cdrom/{packet-writing.txt => packet-writing.rst} (91%)
 rename Documentation/cgroup-v1/{blkio-controller.txt => blkio-controller.rst} (89%)
 rename Documentation/cgroup-v1/{cgroups.txt => cgroups.rst} (88%)
 rename Documentation/cgroup-v1/{cpuacct.txt => cpuacct.rst} (90%)
 rename Documentation/cgroup-v1/{cpusets.txt => cpusets.rst} (90%)
 rename Documentation/cgroup-v1/{devices.txt => devices.rst} (88%)
 rename Documentation/cgroup-v1/{freezer-subsystem.txt => freezer-subsystem.rst} (95%)
 rename Documentation/cgroup-v1/{hugetlb.txt => hugetlb.rst} (74%)
 create mode 100644 Documentation/cgroup-v1/index.rst
 rename Documentation/cgroup-v1/{memcg_test.txt => memcg_test.rst} (62%)
 rename Documentation/cgroup-v1/{memory.txt => memory.rst} (71%)
 rename Documentation/cgroup-v1/{net_cls.txt => net_cls.rst} (50%)
 rename Documentation/cgroup-v1/{net_prio.txt => net_prio.rst} (71%)
 rename Documentation/cgroup-v1/{pids.txt => pids.rst} (62%)
 rename Documentation/cgroup-v1/{rdma.txt => rdma.rst} (79%)
 rename Documentation/{clearing-warn-once.txt => clearing-warn-once.rst} (96%)
 rename Documentation/cma/{debugfs.txt => debugfs.rst} (91%)
 rename Documentation/connector/{connector.txt => connector.rst} (57%)
 rename Documentation/console/{console.txt => console.rst} (80%)
 rename Documentation/cpu-freq/{amd-powernow.txt => amd-powernow.rst} (91%)
 rename Documentation/cpu-freq/{core.txt => core.rst} (66%)
 rename Documentation/cpu-freq/{cpu-drivers.txt => cpu-drivers.rst} (57%)
 rename Documentation/cpu-freq/{cpufreq-nforce2.txt => cpufreq-nforce2.rst} (65%)
 create mode 100644 Documentation/cpu-freq/cpufreq-stats.rst
 delete mode 100644 Documentation/cpu-freq/cpufreq-stats.txt
 create mode 100644 Documentation/cpu-freq/index.rst
 delete mode 100644 Documentation/cpu-freq/index.txt
 rename Documentation/cpu-freq/{pcc-cpufreq.txt => pcc-cpufreq.rst} (80%)
 rename Documentation/{cpu-load.txt => cpu-load.rst} (99%)
 rename Documentation/{cputopology.txt => cputopology.rst} (99%)
 rename Documentation/{crc32.txt => crc32.rst} (99%)
 rename Documentation/{dcdbas.txt => dcdbas.rst} (99%)
 rename Documentation/{debugging-modules.txt => debugging-modules.rst} (98%)
 rename Documentation/{debugging-via-ohci1394.txt => debugging-via-ohci1394.rst} (99%)
 rename Documentation/{dell_rbu.txt => dell_rbu.rst} (99%)
 rename Documentation/device-mapper/{cache-policies.txt => cache-policies.rst} (94%)
 rename Documentation/device-mapper/{cache.txt => cache.rst} (61%)
 rename Documentation/device-mapper/{delay.txt => delay.rst} (53%)
 rename Documentation/device-mapper/{dm-crypt.txt => dm-crypt.rst} (87%)
 rename Documentation/device-mapper/{dm-flakey.txt => dm-flakey.rst} (60%)
 rename Documentation/device-mapper/{dm-init.txt => dm-init.rst} (68%)
 rename Documentation/device-mapper/{dm-integrity.txt => dm-integrity.rst} (90%)
 rename Documentation/device-mapper/{dm-io.txt => dm-io.rst} (92%)
 rename Documentation/device-mapper/{dm-log.txt => dm-log.rst} (90%)
 rename Documentation/device-mapper/{dm-queue-length.txt => dm-queue-length.rst} (76%)
 rename Documentation/device-mapper/{dm-raid.txt => dm-raid.rst} (71%)
 rename Documentation/device-mapper/{dm-service-time.txt => dm-service-time.rst} (60%)
 create mode 100644 Documentation/device-mapper/dm-uevent.rst
 delete mode 100644 Documentation/device-mapper/dm-uevent.txt
 rename Documentation/device-mapper/{dm-zoned.txt => dm-zoned.rst} (97%)
 rename Documentation/device-mapper/{era.txt => era.rst} (70%)
 create mode 100644 Documentation/device-mapper/index.rst
 rename Documentation/device-mapper/{kcopyd.txt => kcopyd.rst} (93%)
 create mode 100644 Documentation/device-mapper/linear.rst
 delete mode 100644 Documentation/device-mapper/linear.txt
 rename Documentation/device-mapper/{log-writes.txt => log-writes.rst} (61%)
 rename Documentation/device-mapper/{persistent-data.txt => persistent-data.rst} (98%)
 rename Documentation/device-mapper/{snapshot.txt => snapshot.rst} (62%)
 rename Documentation/device-mapper/{statistics.txt => statistics.rst} (86%)
 create mode 100644 Documentation/device-mapper/striped.rst
 delete mode 100644 Documentation/device-mapper/striped.txt
 rename Documentation/device-mapper/{switch.txt => switch.rst} (84%)
 rename Documentation/device-mapper/{thin-provisioning.txt => thin-provisioning.rst} (92%)
 rename Documentation/device-mapper/{unstriped.txt => unstriped.rst} (60%)
 rename Documentation/device-mapper/{verity.txt => verity.rst} (98%)
 rename Documentation/device-mapper/{writecache.txt => writecache.rst} (96%)
 rename Documentation/device-mapper/{zero.txt => zero.rst} (83%)
 rename Documentation/{digsig.txt => digsig.rst} (99%)
 rename Documentation/{pps/pps.txt => driver-api/pps.rst} (89%)
 rename Documentation/{ptp/ptp.txt => driver-api/ptp.rst} (88%)
 rename Documentation/driver-model/{binding.txt => binding.rst} (92%)
 rename Documentation/driver-model/{bus.txt => bus.rst} (76%)
 rename Documentation/driver-model/{class.txt => class.rst} (75%)
 rename Documentation/driver-model/{design-patterns.txt => design-patterns.rst} (59%)
 rename Documentation/driver-model/{device.txt => device.rst} (69%)
 rename Documentation/driver-model/{devres.txt => devres.rst} (93%)
 rename Documentation/driver-model/{driver.txt => driver.rst} (75%)
 create mode 100644 Documentation/driver-model/index.rst
 rename Documentation/driver-model/{overview.txt => overview.rst} (90%)
 rename Documentation/driver-model/{platform.txt => platform.rst} (95%)
 rename Documentation/driver-model/{porting.txt => porting.rst} (62%)
 rename Documentation/early-userspace/{buffer-format.txt => buffer-format.rst} (91%)
 rename Documentation/early-userspace/{README => early_userspace_support.rst} (99%)
 create mode 100644 Documentation/early-userspace/index.rst
 rename Documentation/{efi-stub.txt => efi-stub.rst} (99%)
 rename Documentation/{eisa.txt => eisa.rst} (98%)
 rename Documentation/fault-injection/{fault-injection.txt => fault-injection.rst} (68%)
 create mode 100644 Documentation/fault-injection/index.rst
 rename Documentation/fault-injection/{notifier-error-inject.txt => notifier-error-inject.rst} (83%)
 create mode 100644 Documentation/fault-injection/nvme-fault-injection.rst
 delete mode 100644 Documentation/fault-injection/nvme-fault-injection.txt
 create mode 100644 Documentation/fault-injection/provoke-crashes.rst
 delete mode 100644 Documentation/fault-injection/provoke-crashes.txt
 rename Documentation/fb/{api.txt => api.rst} (97%)
 rename Documentation/fb/{arkfb.txt => arkfb.rst} (92%)
 rename Documentation/fb/{aty128fb.txt => aty128fb.rst} (61%)
 rename Documentation/fb/{cirrusfb.txt => cirrusfb.rst} (75%)
 rename Documentation/fb/{cmap_xfbdev.txt => cmap_xfbdev.rst} (50%)
 rename Documentation/fb/{deferred_io.txt => deferred_io.rst} (86%)
 rename Documentation/fb/{efifb.txt => efifb.rst} (75%)
 rename Documentation/fb/{ep93xx-fb.txt => ep93xx-fb.rst} (85%)
 rename Documentation/fb/{fbcon.txt => fbcon.rst} (68%)
 rename Documentation/fb/{framebuffer.txt => framebuffer.rst} (92%)
 rename Documentation/fb/{gxfb.txt => gxfb.rst} (60%)
 create mode 100644 Documentation/fb/index.rst
 rename Documentation/fb/{intel810.txt => intel810.rst} (83%)
 rename Documentation/fb/{intelfb.txt => intelfb.rst} (73%)
 rename Documentation/fb/{internals.txt => internals.rst} (82%)
 rename Documentation/fb/{lxfb.txt => lxfb.rst} (60%)
 create mode 100644 Documentation/fb/matroxfb.rst
 delete mode 100644 Documentation/fb/matroxfb.txt
 rename Documentation/fb/{metronomefb.txt => metronomefb.rst} (98%)
 rename Documentation/fb/{modedb.txt => modedb.rst} (87%)
 create mode 100644 Documentation/fb/pvr2fb.rst
 delete mode 100644 Documentation/fb/pvr2fb.txt
 rename Documentation/fb/{pxafb.txt => pxafb.rst} (78%)
 rename Documentation/fb/{s3fb.txt => s3fb.rst} (94%)
 rename Documentation/fb/{sa1100fb.txt => sa1100fb.rst} (64%)
 create mode 100644 Documentation/fb/sh7760fb.rst
 delete mode 100644 Documentation/fb/sh7760fb.txt
 rename Documentation/fb/{sisfb.txt => sisfb.rst} (85%)
 rename Documentation/fb/{sm501.txt => sm501.rst} (65%)
 rename Documentation/fb/{sm712fb.txt => sm712fb.rst} (59%)
 create mode 100644 Documentation/fb/sstfb.rst
 delete mode 100644 Documentation/fb/sstfb.txt
 rename Documentation/fb/{tgafb.txt => tgafb.rst} (71%)
 rename Documentation/fb/{tridentfb.txt => tridentfb.rst} (70%)
 rename Documentation/fb/{udlfb.txt => udlfb.rst} (77%)
 rename Documentation/fb/{uvesafb.txt => uvesafb.rst} (52%)
 rename Documentation/fb/{vesafb.txt => vesafb.rst} (56%)
 create mode 100644 Documentation/fb/viafb.rst
 delete mode 100644 Documentation/fb/viafb.txt
 rename Documentation/fb/{vt8623fb.txt => vt8623fb.rst} (85%)
 rename Documentation/fmc/{API.txt => api.rst} (87%)
 rename Documentation/fmc/{carrier.txt => carrier.rst} (91%)
 rename Documentation/fmc/{FMC-and-SDB.txt => fmc-and-sdb.rst} (88%)
 rename Documentation/fmc/{fmc-chardev.txt => fmc-chardev.rst} (96%)
 rename Documentation/fmc/{fmc-fakedev.txt => fmc-fakedev.rst} (85%)
 rename Documentation/fmc/{fmc-trivial.txt => fmc-trivial.rst} (69%)
 rename Documentation/fmc/{fmc-write-eeprom.txt => fmc-write-eeprom.rst} (79%)
 rename Documentation/fmc/{identifiers.txt => identifiers.rst} (93%)
 create mode 100644 Documentation/fmc/index.rst
 rename Documentation/fmc/{mezzanine.txt => mezzanine.rst} (87%)
 rename Documentation/fmc/{parameters.txt => parameters.rst} (96%)
 rename Documentation/fpga/{dfl.txt => dfl.rst} (89%)
 create mode 100644 Documentation/fpga/index.rst
 rename Documentation/{futex-requeue-pi.txt => futex-requeue-pi.rst} (99%)
 rename Documentation/{gcc-plugins.txt => gcc-plugins.rst} (99%)
 create mode 100644 Documentation/gpio/index.rst
 rename Documentation/gpio/{sysfs.txt => sysfs.rst} (86%)
 rename Documentation/hid/{hid-alps.txt => hid-alps.rst} (64%)
 rename Documentation/hid/{hid-sensor.txt => hid-sensor.rst} (61%)
 rename Documentation/hid/{hid-transport.txt => hid-transport.rst} (93%)
 rename Documentation/hid/{hiddev.txt => hiddev.rst} (80%)
 rename Documentation/hid/{hidraw.txt => hidraw.rst} (89%)
 create mode 100644 Documentation/hid/index.rst
 create mode 100644 Documentation/hid/intel-ish-hid.rst
 delete mode 100644 Documentation/hid/intel-ish-hid.txt
 rename Documentation/hid/{uhid.txt => uhid.rst} (94%)
 rename Documentation/{highuid.txt => highuid.rst} (99%)
 rename Documentation/{hw_random.txt => hw_random.rst} (99%)
 rename Documentation/{hwspinlock.txt => hwspinlock.rst} (99%)
 rename Documentation/ia64/{aliasing.txt => aliasing.rst} (84%)
 rename Documentation/ia64/{efirtc.txt => efirtc.rst} (76%)
 rename Documentation/ia64/{err_inject.txt => err_inject.rst} (82%)
 rename Documentation/ia64/{fsys.txt => fsys.rst} (76%)
 rename Documentation/ia64/{README => ia64.rst} (61%)
 create mode 100644 Documentation/ia64/index.rst
 rename Documentation/ia64/{IRQ-redir.txt => irq-redir.rst} (84%)
 rename Documentation/ia64/{mca.txt => mca.rst} (96%)
 rename Documentation/ia64/{serial.txt => serial.rst} (87%)
 create mode 100644 Documentation/ia64/xen.rst
 delete mode 100644 Documentation/ia64/xen.txt
 create mode 100644 Documentation/ide/changelogs.rst
 rename Documentation/ide/{ide-tape.txt => ide-tape.rst} (83%)
 rename Documentation/ide/{ide.txt => ide.rst} (72%)
 create mode 100644 Documentation/ide/index.rst
 rename Documentation/ide/{warm-plug-howto.txt => warm-plug-howto.rst} (61%)
 rename Documentation/iio/{ep93xx_adc.txt => ep93xx_adc.rst} (71%)
 rename Documentation/iio/{iio_configfs.txt => iio_configfs.rst} (73%)
 create mode 100644 Documentation/iio/index.rst
 rename Documentation/infiniband/{core_locking.txt => core_locking.rst} (78%)
 create mode 100644 Documentation/infiniband/index.rst
 rename Documentation/infiniband/{ipoib.txt => ipoib.rst} (90%)
 rename Documentation/infiniband/{opa_vnic.txt => opa_vnic.rst} (63%)
 rename Documentation/infiniband/{sysfs.txt => sysfs.rst} (69%)
 rename Documentation/infiniband/{tag_matching.txt => tag_matching.rst} (98%)
 rename Documentation/infiniband/{user_mad.txt => user_mad.rst} (90%)
 rename Documentation/infiniband/{user_verbs.txt => user_verbs.rst} (93%)
 rename Documentation/{intel_txt.txt => intel_txt.rst} (99%)
 rename Documentation/{io-mapping.txt => io-mapping.rst} (99%)
 rename Documentation/{io_ordering.txt => io_ordering.rst} (99%)
 rename Documentation/ioctl/{botching-up-ioctls.txt => botching-up-ioctls.rst} (99%)
 create mode 100644 Documentation/ioctl/cdrom.rst
 delete mode 100644 Documentation/ioctl/cdrom.txt
 rename Documentation/ioctl/{hdio.txt => hdio.rst} (54%)
 create mode 100644 Documentation/ioctl/index.rst
 rename Documentation/ioctl/{ioctl-decoding.txt => ioctl-decoding.rst} (54%)
 create mode 100644 Documentation/ioctl/ioctl-number.rst
 delete mode 100644 Documentation/ioctl/ioctl-number.txt
 rename Documentation/{iostats.txt => iostats.rst} (99%)
 rename Documentation/{irqflags-tracing.txt => irqflags-tracing.rst} (99%)
 rename Documentation/{isa.txt => isa.rst} (99%)
 rename Documentation/{isapnp.txt => isapnp.rst} (98%)
 rename Documentation/kbuild/{headers_install.txt => headers_install.rst} (96%)
 create mode 100644 Documentation/kbuild/index.rst
 create mode 100644 Documentation/kbuild/issues.rst
 rename Documentation/kbuild/{kbuild.txt => kbuild.rst} (72%)
 rename Documentation/kbuild/{kconfig-language.txt => kconfig-language.rst} (85%)
 rename Documentation/kbuild/{kconfig-macro-language.txt => kconfig-macro-language.rst} (94%)
 rename Documentation/kbuild/{kconfig.txt => kconfig.rst} (80%)
 rename Documentation/kbuild/{makefiles.txt => makefiles.rst} (84%)
 rename Documentation/kbuild/{modules.txt => modules.rst} (84%)
 create mode 100644 Documentation/kdump/index.rst
 rename Documentation/kdump/{kdump.txt => kdump.rst} (91%)
 rename Documentation/kdump/{vmcoreinfo.txt => vmcoreinfo.rst} (95%)
 rename Documentation/{kernel-per-CPU-kthreads.txt => kernel-per-CPU-kthreads.rst} (99%)
 rename Documentation/{kobject.txt => kobject.rst} (99%)
 rename Documentation/{kprobes.txt => kprobes.rst} (99%)
 rename Documentation/{kref.txt => kref.rst} (99%)
 rename Documentation/laptops/{asus-laptop.txt => asus-laptop.rst} (84%)
 rename Documentation/laptops/{disk-shock-protection.txt => disk-shock-protection.rst} (91%)
 create mode 100644 Documentation/laptops/index.rst
 rename Documentation/laptops/{laptop-mode.txt => laptop-mode.rst} (62%)
 rename Documentation/laptops/{sony-laptop.txt => sony-laptop.rst} (85%)
 rename Documentation/laptops/{sonypi.txt => sonypi.rst} (87%)
 rename Documentation/laptops/{thinkpad-acpi.txt => thinkpad-acpi.rst} (88%)
 rename Documentation/laptops/{toshiba_haps.txt => toshiba_haps.rst} (60%)
 rename Documentation/{ldm.txt => ldm.rst} (99%)
 create mode 100644 Documentation/leds/index.rst
 rename Documentation/leds/{leds-blinkm.txt => leds-blinkm.rst} (56%)
 rename Documentation/leds/{leds-class-flash.txt => leds-class-flash.rst} (74%)
 rename Documentation/leds/{leds-class.txt => leds-class.rst} (92%)
 rename Documentation/leds/{leds-lm3556.txt => leds-lm3556.rst} (70%)
 rename Documentation/leds/{leds-lp3944.txt => leds-lp3944.rst} (78%)
 create mode 100644 Documentation/leds/leds-lp5521.rst
 delete mode 100644 Documentation/leds/leds-lp5521.txt
 create mode 100644 Documentation/leds/leds-lp5523.rst
 delete mode 100644 Documentation/leds/leds-lp5523.txt
 create mode 100644 Documentation/leds/leds-lp5562.rst
 delete mode 100644 Documentation/leds/leds-lp5562.txt
 create mode 100644 Documentation/leds/leds-lp55xx.rst
 delete mode 100644 Documentation/leds/leds-lp55xx.txt
 create mode 100644 Documentation/leds/leds-mlxcpld.rst
 delete mode 100644 Documentation/leds/leds-mlxcpld.txt
 rename Documentation/leds/{ledtrig-oneshot.txt => ledtrig-oneshot.rst} (90%)
 rename Documentation/leds/{ledtrig-transient.txt => ledtrig-transient.rst} (81%)
 rename Documentation/leds/{ledtrig-usbport.txt => ledtrig-usbport.rst} (86%)
 rename Documentation/leds/{uleds.txt => uleds.rst} (95%)
 rename Documentation/livepatch/{callbacks.txt => callbacks.rst} (94%)
 rename Documentation/livepatch/{cumulative-patches.txt => cumulative-patches.rst} (89%)
 create mode 100644 Documentation/livepatch/index.rst
 rename Documentation/livepatch/{livepatch.txt => livepatch.rst} (93%)
 rename Documentation/livepatch/{module-elf-format.txt => module-elf-format.rst} (68%)
 rename Documentation/livepatch/{shadow-vars.txt => shadow-vars.rst} (87%)
 create mode 100644 Documentation/locking/index.rst
 rename Documentation/locking/{lockdep-design.txt => lockdep-design.rst} (93%)
 create mode 100644 Documentation/locking/lockstat.rst
 delete mode 100644 Documentation/locking/lockstat.txt
 rename Documentation/locking/{locktorture.txt => locktorture.rst} (57%)
 rename Documentation/locking/{mutex-design.txt => mutex-design.rst} (94%)
 rename Documentation/locking/{rt-mutex-design.txt => rt-mutex-design.rst} (91%)
 rename Documentation/locking/{rt-mutex.txt => rt-mutex.rst} (70%)
 rename Documentation/locking/{spinlocks.txt => spinlocks.rst} (89%)
 rename Documentation/locking/{ww-mutex-design.txt => ww-mutex-design.rst} (93%)
 rename Documentation/{lockup-watchdogs.txt => lockup-watchdogs.rst} (99%)
 rename Documentation/{lsm.txt => lsm.rst} (99%)
 rename Documentation/{lzo.txt => lzo.rst} (99%)
 create mode 100644 Documentation/m68k/index.rst
 rename Documentation/m68k/{kernel-options.txt => kernel-options.rst} (78%)
 rename Documentation/{mailbox.txt => mailbox.rst} (99%)
 create mode 100644 Documentation/md/index.rst
 rename Documentation/md/{md-cluster.txt => md-cluster.rst} (68%)
 rename Documentation/md/{raid5-cache.txt => raid5-cache.rst} (92%)
 rename Documentation/md/{raid5-ppl.txt => raid5-ppl.rst} (98%)
 rename Documentation/memory-devices/{ti-emif.txt => ti-emif.rst} (81%)
 rename Documentation/{men-chameleon-bus.txt => men-chameleon-bus.rst} (99%)
 create mode 100644 Documentation/mic/index.rst
 rename Documentation/mic/{mic_overview.txt => mic_overview.rst} (96%)
 rename Documentation/mic/{scif_overview.txt => scif_overview.rst} (76%)
 create mode 100644 Documentation/mmc/index.rst
 rename Documentation/mmc/{mmc-async-req.txt => mmc-async-req.rst} (75%)
 rename Documentation/mmc/{mmc-dev-attrs.txt => mmc-dev-attrs.rst} (73%)
 rename Documentation/mmc/{mmc-dev-parts.txt => mmc-dev-parts.rst} (83%)
 rename Documentation/mmc/{mmc-tools.txt => mmc-tools.rst} (92%)
 create mode 100644 Documentation/mtd/index.rst
 rename Documentation/mtd/{intel-spi.txt => intel-spi.rst} (71%)
 rename Documentation/mtd/{nand_ecc.txt => nand_ecc.rst} (67%)
 rename Documentation/mtd/{spi-nor.txt => spi-nor.rst} (94%)
 rename Documentation/namespaces/{compatibility-list.txt => compatibility-list.rst} (86%)
 create mode 100644 Documentation/namespaces/index.rst
 rename Documentation/namespaces/{resource-control.txt => resource-control.rst} (89%)
 rename Documentation/netlabel/{cipso_ipv4.txt => cipso_ipv4.rst} (87%)
 create mode 100644 Documentation/netlabel/draft_ietf.rst
 create mode 100644 Documentation/netlabel/index.rst
 rename Documentation/netlabel/{introduction.txt => introduction.rst} (91%)
 rename Documentation/netlabel/{lsm_interface.txt => lsm_interface.rst} (88%)
 create mode 100644 Documentation/nfc/index.rst
 rename Documentation/nfc/{nfc-hci.txt => nfc-hci.rst} (71%)
 rename Documentation/nfc/{nfc-pn544.txt => nfc-pn544.rst} (82%)
 rename Documentation/{nommu-mmap.txt => nommu-mmap.rst} (99%)
 rename Documentation/{ntb.txt => ntb.rst} (99%)
 rename Documentation/{numastat.txt => numastat.rst} (99%)
 rename Documentation/nvdimm/{btt.txt => btt.rst} (71%)
 create mode 100644 Documentation/nvdimm/index.rst
 rename Documentation/nvdimm/{nvdimm.txt => nvdimm.rst} (60%)
 rename Documentation/nvdimm/{security.txt => security.rst} (99%)
 rename Documentation/nvmem/{nvmem.txt => nvmem.rst} (62%)
 rename Documentation/{padata.txt => padata.rst} (99%)
 rename Documentation/{parport-lowlevel.txt => parport-lowlevel.rst} (99%)
 rename Documentation/pcmcia/{devicetable.txt => devicetable.rst} (97%)
 rename Documentation/pcmcia/{driver-changes.txt => driver-changes.rst} (90%)
 rename Documentation/pcmcia/{driver.txt => driver.rst} (66%)
 create mode 100644 Documentation/pcmcia/index.rst
 rename Documentation/pcmcia/{locking.txt => locking.rst} (81%)
 rename Documentation/{percpu-rw-semaphore.txt => percpu-rw-semaphore.rst} (99%)
 rename Documentation/perf/{arm-ccn.txt => arm-ccn.rst} (86%)
 rename Documentation/perf/{arm_dsu_pmu.txt => arm_dsu_pmu.rst} (92%)
 rename Documentation/perf/{hisi-pmu.txt => hisi-pmu.rst} (73%)
 create mode 100644 Documentation/perf/index.rst
 rename Documentation/perf/{qcom_l2_pmu.txt => qcom_l2_pmu.rst} (94%)
 rename Documentation/perf/{qcom_l3_pmu.txt => qcom_l3_pmu.rst} (93%)
 rename Documentation/perf/{thunderx2-pmu.txt => thunderx2-pmu.rst} (73%)
 rename Documentation/perf/{xgene-pmu.txt => xgene-pmu.rst} (96%)
 rename Documentation/{phy.txt => phy.rst} (99%)
 rename Documentation/phy/{samsung-usb2.txt => samsung-usb2.rst} (77%)
 rename Documentation/{pi-futex.txt => pi-futex.rst} (99%)
 rename Documentation/{pnp.txt => pnp.rst} (99%)
 rename Documentation/power/{apm-acpi.txt => apm-acpi.rst} (87%)
 rename Documentation/power/{basic-pm-debugging.txt => basic-pm-debugging.rst} (87%)
 rename Documentation/power/{charger-manager.txt => charger-manager.rst} (78%)
 rename Documentation/power/{drivers-testing.txt => drivers-testing.rst} (86%)
 rename Documentation/power/{energy-model.txt => energy-model.rst} (74%)
 rename Documentation/power/{freezing-of-tasks.txt => freezing-of-tasks.rst} (75%)
 create mode 100644 Documentation/power/index.rst
 rename Documentation/power/{interface.txt => interface.rst} (84%)
 rename Documentation/power/{opp.txt => opp.rst} (78%)
 rename Documentation/power/{pci.txt => pci.rst} (97%)
 rename Documentation/power/{pm_qos_interface.txt => pm_qos_interface.rst} (62%)
 create mode 100644 Documentation/power/power_supply_class.rst
 delete mode 100644 Documentation/power/power_supply_class.txt
 create mode 100644 Documentation/power/powercap/powercap.rst
 delete mode 100644 Documentation/power/powercap/powercap.txt
 rename Documentation/power/regulator/{consumer.txt => consumer.rst} (61%)
 rename Documentation/power/regulator/{design.txt => design.rst} (86%)
 rename Documentation/power/regulator/{machine.txt => machine.rst} (75%)
 rename Documentation/power/regulator/{overview.txt => overview.rst} (79%)
 create mode 100644 Documentation/power/regulator/regulator.rst
 delete mode 100644 Documentation/power/regulator/regulator.txt
 rename Documentation/power/{runtime_pm.txt => runtime_pm.rst} (89%)
 rename Documentation/power/{s2ram.txt => s2ram.rst} (92%)
 rename Documentation/power/{suspend-and-cpuhotplug.txt => suspend-and-cpuhotplug.rst} (90%)
 rename Documentation/power/{suspend-and-interrupts.txt => suspend-and-interrupts.rst} (98%)
 rename Documentation/power/{swsusp-and-swap-files.txt => swsusp-and-swap-files.rst} (83%)
 rename Documentation/power/{swsusp-dmcrypt.txt => swsusp-dmcrypt.rst} (67%)
 create mode 100644 Documentation/power/swsusp.rst
 delete mode 100644 Documentation/power/swsusp.txt
 rename Documentation/power/{tricks.txt => tricks.rst} (93%)
 rename Documentation/power/{userland-swsusp.txt => userland-swsusp.rst} (85%)
 rename Documentation/power/{video.txt => video.rst} (56%)
 rename Documentation/powerpc/{bootwrapper.txt => bootwrapper.rst} (93%)
 rename Documentation/powerpc/{cpu_families.txt => cpu_families.rst} (95%)
 rename Documentation/powerpc/{cpu_features.txt => cpu_features.rst} (97%)
 rename Documentation/powerpc/{cxl.txt => cxl.rst} (95%)
 rename Documentation/powerpc/{cxlflash.txt => cxlflash.rst} (98%)
 rename Documentation/powerpc/{DAWR-POWER9.txt => dawr-power9.rst} (95%)
 rename Documentation/powerpc/{dscr.txt => dscr.rst} (91%)
 rename Documentation/powerpc/{eeh-pci-error-recovery.txt => eeh-pci-error-recovery.rst} (82%)
 rename Documentation/powerpc/{firmware-assisted-dump.txt => firmware-assisted-dump.rst} (80%)
 rename Documentation/powerpc/{hvcs.txt => hvcs.rst} (91%)
 create mode 100644 Documentation/powerpc/index.rst
 rename Documentation/powerpc/{mpc52xx.txt => mpc52xx.rst} (91%)
 rename Documentation/powerpc/{pci_iov_resource_on_powernv.txt => pci_iov_resource_on_powernv.rst} (97%)
 rename Documentation/powerpc/{pmu-ebb.txt => pmu-ebb.rst} (99%)
 create mode 100644 Documentation/powerpc/ptrace.rst
 delete mode 100644 Documentation/powerpc/ptrace.txt
 rename Documentation/powerpc/{qe_firmware.txt => qe_firmware.rst} (95%)
 rename Documentation/powerpc/{syscall64-abi.txt => syscall64-abi.rst} (82%)
 rename Documentation/powerpc/{transactional_memory.txt => transactional_memory.rst} (93%)
 rename Documentation/{preempt-locking.txt => preempt-locking.rst} (99%)
 create mode 100644 Documentation/pti/pti_intel_mid.rst
 delete mode 100644 Documentation/pti/pti_intel_mid.txt
 rename Documentation/{pwm.txt => pwm.rst} (99%)
 create mode 100644 Documentation/rapidio/index.rst
 rename Documentation/rapidio/{mport_cdev.txt => mport_cdev.rst} (84%)
 rename Documentation/rapidio/{rapidio.txt => rapidio.rst} (97%)
 rename Documentation/rapidio/{rio_cm.txt => rio_cm.rst} (76%)
 rename Documentation/rapidio/{sysfs.txt => sysfs.rst} (75%)
 rename Documentation/rapidio/{tsi721.txt => tsi721.rst} (79%)
 rename Documentation/{rbtree.txt => rbtree.rst} (99%)
 rename Documentation/{remoteproc.txt => remoteproc.rst} (99%)
 rename Documentation/{rfkill.txt => rfkill.rst} (99%)
 create mode 100644 Documentation/riscv/index.rst
 rename Documentation/riscv/{pmu.txt => pmu.rst} (77%)
 rename Documentation/{robust-futex-ABI.txt => robust-futex-ABI.rst} (99%)
 rename Documentation/{robust-futexes.txt => robust-futexes.rst} (99%)
 rename Documentation/{rpmsg.txt => rpmsg.rst} (99%)
 rename Documentation/{rtc.txt => rtc.rst} (99%)
 rename Documentation/s390/{3270.txt => 3270.rst} (90%)
 delete mode 100644 Documentation/s390/Debugging390.txt
 rename Documentation/s390/{cds.txt => cds.rst} (64%)
 rename Documentation/s390/{CommonIO => common_io.rst} (87%)
 rename Documentation/s390/{DASD => dasd.rst} (92%)
 create mode 100644 Documentation/s390/debugging390.rst
 rename Documentation/s390/{driver-model.txt => driver-model.rst} (73%)
 create mode 100644 Documentation/s390/index.rst
 rename Documentation/s390/{monreader.txt => monreader.rst} (81%)
 rename Documentation/s390/{qeth.txt => qeth.rst} (62%)
 create mode 100644 Documentation/s390/s390dbf.rst
 delete mode 100644 Documentation/s390/s390dbf.txt
 create mode 100644 Documentation/s390/text_files.rst
 rename Documentation/s390/{vfio-ap.txt => vfio-ap.rst} (72%)
 rename Documentation/s390/{vfio-ccw.txt => vfio-ccw.rst} (88%)
 rename Documentation/s390/{zfcpdump.txt => zfcpdump.rst} (97%)
 rename Documentation/scheduler/{completion.txt => completion.rst} (94%)
 create mode 100644 Documentation/scheduler/index.rst
 rename Documentation/scheduler/{sched-arch.txt => sched-arch.rst} (81%)
 rename Documentation/scheduler/{sched-bwc.txt => sched-bwc.rst} (90%)
 rename Documentation/scheduler/{sched-deadline.txt => sched-deadline.rst} (88%)
 rename Documentation/scheduler/{sched-design-CFS.txt => sched-design-CFS.rst} (97%)
 rename Documentation/scheduler/{sched-domains.txt => sched-domains.rst} (97%)
 rename Documentation/scheduler/{sched-energy.txt => sched-energy.rst} (96%)
 rename Documentation/scheduler/{sched-nice-design.txt => sched-nice-design.rst} (98%)
 rename Documentation/scheduler/{sched-rt-group.txt => sched-rt-group.rst} (95%)
 rename Documentation/scheduler/{sched-stats.txt => sched-stats.rst} (91%)
 create mode 100644 Documentation/scheduler/text_files.rst
 rename Documentation/security/tpm/{xen-tpmfront.txt => xen-tpmfront.rst} (66%)
 rename Documentation/serial/{README.cycladesZ => cyclades_z.rst} (85%)
 rename Documentation/serial/{driver => driver.rst} (92%)
 create mode 100644 Documentation/serial/index.rst
 delete mode 100644 Documentation/serial/moxa-smartio
 create mode 100644 Documentation/serial/moxa-smartio.rst
 create mode 100644 Documentation/serial/n_gsm.rst
 delete mode 100644 Documentation/serial/n_gsm.txt
 rename Documentation/serial/{rocket.txt => rocket.rst} (68%)
 rename Documentation/serial/{serial-iso7816.txt => serial-iso7816.rst} (85%)
 rename Documentation/serial/{serial-rs485.txt => serial-rs485.rst} (89%)
 rename Documentation/serial/{tty.txt => tty.rst} (74%)
 rename Documentation/{sgi-ioc4.txt => sgi-ioc4.rst} (99%)
 rename Documentation/{siphash.txt => siphash.rst} (99%)
 rename Documentation/{smsc_ece1099.txt => smsc_ece1099.rst} (99%)
 rename Documentation/sparc/{adi.txt => adi.rst} (70%)
 rename Documentation/sparc/{console.txt => console.rst} (53%)
 create mode 100644 Documentation/sparc/index.rst
 rename Documentation/sparc/oradax/{oracle-dax.txt => oracle-dax.rst} (95%)
 rename Documentation/{speculation.txt => speculation.rst} (99%)
 rename Documentation/{static-keys.txt => static-keys.rst} (99%)
 rename Documentation/{svga.txt => svga.rst} (99%)
 rename Documentation/{switchtec.txt => switchtec.rst} (98%)
 rename Documentation/{sync_file.txt => sync_file.rst} (99%)
 create mode 100644 Documentation/sysctl/abi.rst
 delete mode 100644 Documentation/sysctl/abi.txt
 rename Documentation/sysctl/{fs.txt => fs.rst} (77%)
 rename Documentation/sysctl/{README => index.rst} (78%)
 rename Documentation/sysctl/{kernel.txt => kernel.rst} (79%)
 rename Documentation/sysctl/{net.txt => net.rst} (85%)
 rename Documentation/sysctl/{sunrpc.txt => sunrpc.rst} (62%)
 rename Documentation/sysctl/{user.txt => user.rst} (77%)
 rename Documentation/sysctl/{vm.txt => vm.rst} (84%)
 create mode 100644 Documentation/target/index.rst
 create mode 100644 Documentation/target/scripts.rst
 create mode 100644 Documentation/target/tcm_mod_builder.rst
 delete mode 100644 Documentation/target/tcm_mod_builder.txt
 rename Documentation/target/{tcmu-design.txt => tcmu-design.rst} (69%)
 rename Documentation/{tee.txt => tee.rst} (99%)
 rename Documentation/thermal/{cpu-cooling-api.txt => cpu-cooling-api.rst} (82%)
 rename Documentation/thermal/{exynos_thermal => exynos_thermal.rst} (67%)
 delete mode 100644 Documentation/thermal/exynos_thermal_emulation
 create mode 100644 Documentation/thermal/exynos_thermal_emulation.rst
 create mode 100644 Documentation/thermal/index.rst
 rename Documentation/thermal/{intel_powerclamp.txt => intel_powerclamp.rst} (76%)
 rename Documentation/thermal/{nouveau_thermal => nouveau_thermal.rst} (64%)
 rename Documentation/thermal/{power_allocator.txt => power_allocator.rst} (74%)
 rename Documentation/thermal/{sysfs-api.txt => sysfs-api.rst} (66%)
 rename Documentation/thermal/{x86_pkg_temperature_thermal => x86_pkg_temperature_thermal.rst} (80%)
 rename Documentation/{this_cpu_ops.txt => this_cpu_ops.rst} (99%)
 rename Documentation/timers/{highres.txt => highres.rst} (98%)
 rename Documentation/timers/{hpet.txt => hpet.rst} (91%)
 rename Documentation/timers/{hrtimers.txt => hrtimers.rst} (98%)
 create mode 100644 Documentation/timers/index.rst
 rename Documentation/timers/{NO_HZ.txt => no_hz.rst} (93%)
 rename Documentation/timers/{timekeeping.txt => timekeeping.rst} (98%)
 rename Documentation/timers/{timers-howto.txt => timers-howto.rst} (93%)
 rename Documentation/{unaligned-memory-access.txt => unaligned-memory-access.rst} (99%)
 rename Documentation/{vfio-mediated-device.txt => vfio-mediated-device.rst} (99%)
 rename Documentation/{vfio.txt => vfio.rst} (99%)
 rename Documentation/{video-output.txt => video-output.rst} (99%)
 rename Documentation/watchdog/{convert_drivers_to_kernel_api.txt => convert_drivers_to_kernel_api.rst} (75%)
 rename Documentation/watchdog/{hpwdt.txt => hpwdt.rst} (77%)
 create mode 100644 Documentation/watchdog/index.rst
 rename Documentation/watchdog/{mlx-wdt.txt => mlx-wdt.rst} (78%)
 rename Documentation/watchdog/{pcwd-watchdog.txt => pcwd-watchdog.rst} (89%)
 rename Documentation/watchdog/{watchdog-api.txt => watchdog-api.rst} (80%)
 rename Documentation/watchdog/{watchdog-kernel-api.txt => watchdog-kernel-api.rst} (90%)
 create mode 100644 Documentation/watchdog/watchdog-parameters.rst
 delete mode 100644 Documentation/watchdog/watchdog-parameters.txt
 rename Documentation/watchdog/{watchdog-pm.txt => watchdog-pm.rst} (92%)
 rename Documentation/watchdog/{wdt.txt => wdt.rst} (68%)
 rename Documentation/xilinx/{eemi.txt => eemi.rst} (92%)
 create mode 100644 Documentation/xilinx/index.rst
 rename Documentation/{xillybus.txt => xillybus.rst} (99%)
 rename Documentation/xtensa/{atomctl.txt => atomctl.rst} (81%)
 rename Documentation/xtensa/{booting.txt => booting.rst} (91%)
 create mode 100644 Documentation/xtensa/index.rst
 create mode 100644 Documentation/xtensa/mmu.rst
 delete mode 100644 Documentation/xtensa/mmu.txt
 rename Documentation/{xz.txt => xz.rst} (99%)
 rename Documentation/{zorro.txt => zorro.rst} (99%)

-- 
2.20.1



^ permalink raw reply	[flat|nested] 124+ messages in thread

* [PATCH v2 01/79] docs: core-api: fix broken references for div64.c and gcd.c
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
@ 2019-04-22 13:26   ` Mauro Carvalho Chehab
  2019-04-22 13:26   ` [PATCH v2 02/79] docs: trace: fix some Sphinx warnings Mauro Carvalho Chehab
                     ` (76 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:26 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet

Those files were moved to lib/math.

Fixes: 9635bad21596 ("lib: Move mathematic helpers to separate folder")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/core-api/kernel-api.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst
index 71f5d2fe39b7..a29c99d13331 100644
--- a/Documentation/core-api/kernel-api.rst
+++ b/Documentation/core-api/kernel-api.rst
@@ -147,10 +147,10 @@ Division Functions
 .. kernel-doc:: include/linux/math64.h
    :internal:
 
-.. kernel-doc:: lib/div64.c
+.. kernel-doc:: lib/math/div64.c
    :functions: div_s64_rem div64_u64_rem div64_u64 div64_s64
 
-.. kernel-doc:: lib/gcd.c
+.. kernel-doc:: lib/math/gcd.c
    :export:
 
 UUID/GUID
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 02/79] docs: trace: fix some Sphinx warnings
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
  2019-04-22 13:26   ` [PATCH v2 01/79] docs: core-api: fix broken references for div64.c and gcd.c Mauro Carvalho Chehab
@ 2019-04-22 13:26   ` Mauro Carvalho Chehab
  2019-04-24 15:10     ` Steven Rostedt
  2019-04-22 13:26   ` [PATCH v2 03/79] scripts/documentation-file-ref-check: don't parse Next/ dir Mauro Carvalho Chehab
                     ` (75 subsequent siblings)
  77 siblings, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:26 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Steven Rostedt, Ingo Molnar

There are some warnings produced when building trace. Fix them.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/trace/ftrace.rst    |  1 +
 Documentation/trace/histogram.rst | 86 ++++++++++++++++---------------
 2 files changed, 45 insertions(+), 42 deletions(-)

diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst
index 809b39d066ee..f60079259669 100644
--- a/Documentation/trace/ftrace.rst
+++ b/Documentation/trace/ftrace.rst
@@ -1435,6 +1435,7 @@ trace has provided some very helpful debugging information.
 
 If we prefer function graph output instead of function, we can set
 display-graph option::
+
  with echo 1 > options/display-graph
 
   # tracer: irqsoff
diff --git a/Documentation/trace/histogram.rst b/Documentation/trace/histogram.rst
index 7612c7ad5715..2a6b23f779bb 100644
--- a/Documentation/trace/histogram.rst
+++ b/Documentation/trace/histogram.rst
@@ -2121,33 +2121,33 @@ The following commonly-used handler.action pairs are available:
     the end the event that triggered the snapshot (in this case you
     can verify the timestamps between the sched_waking and
     sched_switch events, which should match the time displayed in the
-    global maximum):
+    global maximum)::
 
-    # cat /sys/kernel/debug/tracing/snapshot
+     # cat /sys/kernel/debug/tracing/snapshot
 
-     <...>-2103  [005] d..3   309.873125: sched_switch: prev_comm=cyclictest prev_pid=2103 prev_prio=19 prev_state=D ==> next_comm=swapper/5 next_pid=0 next_prio=120
-     <idle>-0     [005] d.h3   309.873611: sched_waking: comm=cyclictest pid=2102 prio=19 target_cpu=005
-     <idle>-0     [005] dNh4   309.873613: sched_wakeup: comm=cyclictest pid=2102 prio=19 target_cpu=005
-     <idle>-0     [005] d..3   309.873616: sched_switch: prev_comm=swapper/5 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=cyclictest next_pid=2102 next_prio=19
-     <...>-2102  [005] d..3   309.873625: sched_switch: prev_comm=cyclictest prev_pid=2102 prev_prio=19 prev_state=D ==> next_comm=swapper/5 next_pid=0 next_prio=120
-     <idle>-0     [005] d.h3   309.874624: sched_waking: comm=cyclictest pid=2102 prio=19 target_cpu=005
-     <idle>-0     [005] dNh4   309.874626: sched_wakeup: comm=cyclictest pid=2102 prio=19 target_cpu=005
-     <idle>-0     [005] dNh3   309.874628: sched_waking: comm=cyclictest pid=2103 prio=19 target_cpu=005
-     <idle>-0     [005] dNh4   309.874630: sched_wakeup: comm=cyclictest pid=2103 prio=19 target_cpu=005
-     <idle>-0     [005] d..3   309.874633: sched_switch: prev_comm=swapper/5 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=cyclictest next_pid=2102 next_prio=19
-     <idle>-0     [004] d.h3   309.874757: sched_waking: comm=gnome-terminal- pid=1699 prio=120 target_cpu=004
-     <idle>-0     [004] dNh4   309.874762: sched_wakeup: comm=gnome-terminal- pid=1699 prio=120 target_cpu=004
-     <idle>-0     [004] d..3   309.874766: sched_switch: prev_comm=swapper/4 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=gnome-terminal- next_pid=1699 next_prio=120
- gnome-terminal--1699  [004] d.h2   309.874941: sched_stat_runtime: comm=gnome-terminal- pid=1699 runtime=180706 [ns] vruntime=1126870572 [ns]
-     <idle>-0     [003] d.s4   309.874956: sched_waking: comm=rcu_sched pid=9 prio=120 target_cpu=007
-     <idle>-0     [003] d.s5   309.874960: sched_wake_idle_without_ipi: cpu=7
-     <idle>-0     [003] d.s5   309.874961: sched_wakeup: comm=rcu_sched pid=9 prio=120 target_cpu=007
-     <idle>-0     [007] d..3   309.874963: sched_switch: prev_comm=swapper/7 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=rcu_sched next_pid=9 next_prio=120
-  rcu_sched-9     [007] d..3   309.874973: sched_stat_runtime: comm=rcu_sched pid=9 runtime=13646 [ns] vruntime=22531430286 [ns]
-  rcu_sched-9     [007] d..3   309.874978: sched_switch: prev_comm=rcu_sched prev_pid=9 prev_prio=120 prev_state=R+ ==> next_comm=swapper/7 next_pid=0 next_prio=120
-      <...>-2102  [005] d..4   309.874994: sched_migrate_task: comm=cyclictest pid=2103 prio=19 orig_cpu=5 dest_cpu=1
-      <...>-2102  [005] d..4   309.875185: sched_wake_idle_without_ipi: cpu=1
-     <idle>-0     [001] d..3   309.875200: sched_switch: prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=cyclictest next_pid=2103 next_prio=19
+         <...>-2103  [005] d..3   309.873125: sched_switch: prev_comm=cyclictest prev_pid=2103 prev_prio=19 prev_state=D ==> next_comm=swapper/5 next_pid=0 next_prio=120
+         <idle>-0     [005] d.h3   309.873611: sched_waking: comm=cyclictest pid=2102 prio=19 target_cpu=005
+         <idle>-0     [005] dNh4   309.873613: sched_wakeup: comm=cyclictest pid=2102 prio=19 target_cpu=005
+         <idle>-0     [005] d..3   309.873616: sched_switch: prev_comm=swapper/5 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=cyclictest next_pid=2102 next_prio=19
+         <...>-2102  [005] d..3   309.873625: sched_switch: prev_comm=cyclictest prev_pid=2102 prev_prio=19 prev_state=D ==> next_comm=swapper/5 next_pid=0 next_prio=120
+         <idle>-0     [005] d.h3   309.874624: sched_waking: comm=cyclictest pid=2102 prio=19 target_cpu=005
+         <idle>-0     [005] dNh4   309.874626: sched_wakeup: comm=cyclictest pid=2102 prio=19 target_cpu=005
+         <idle>-0     [005] dNh3   309.874628: sched_waking: comm=cyclictest pid=2103 prio=19 target_cpu=005
+         <idle>-0     [005] dNh4   309.874630: sched_wakeup: comm=cyclictest pid=2103 prio=19 target_cpu=005
+         <idle>-0     [005] d..3   309.874633: sched_switch: prev_comm=swapper/5 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=cyclictest next_pid=2102 next_prio=19
+         <idle>-0     [004] d.h3   309.874757: sched_waking: comm=gnome-terminal- pid=1699 prio=120 target_cpu=004
+         <idle>-0     [004] dNh4   309.874762: sched_wakeup: comm=gnome-terminal- pid=1699 prio=120 target_cpu=004
+         <idle>-0     [004] d..3   309.874766: sched_switch: prev_comm=swapper/4 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=gnome-terminal- next_pid=1699 next_prio=120
+     gnome-terminal--1699  [004] d.h2   309.874941: sched_stat_runtime: comm=gnome-terminal- pid=1699 runtime=180706 [ns] vruntime=1126870572 [ns]
+         <idle>-0     [003] d.s4   309.874956: sched_waking: comm=rcu_sched pid=9 prio=120 target_cpu=007
+         <idle>-0     [003] d.s5   309.874960: sched_wake_idle_without_ipi: cpu=7
+         <idle>-0     [003] d.s5   309.874961: sched_wakeup: comm=rcu_sched pid=9 prio=120 target_cpu=007
+         <idle>-0     [007] d..3   309.874963: sched_switch: prev_comm=swapper/7 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=rcu_sched next_pid=9 next_prio=120
+      rcu_sched-9     [007] d..3   309.874973: sched_stat_runtime: comm=rcu_sched pid=9 runtime=13646 [ns] vruntime=22531430286 [ns]
+      rcu_sched-9     [007] d..3   309.874978: sched_switch: prev_comm=rcu_sched prev_pid=9 prev_prio=120 prev_state=R+ ==> next_comm=swapper/7 next_pid=0 next_prio=120
+          <...>-2102  [005] d..4   309.874994: sched_migrate_task: comm=cyclictest pid=2103 prio=19 orig_cpu=5 dest_cpu=1
+          <...>-2102  [005] d..4   309.875185: sched_wake_idle_without_ipi: cpu=1
+         <idle>-0     [001] d..3   309.875200: sched_switch: prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=cyclictest next_pid=2103 next_prio=19
 
   - onchange(var).save(field,..	.)
 
@@ -2201,9 +2201,10 @@ The following commonly-used handler.action pairs are available:
     following the rest of the fields.
 
     If a snaphot was taken, there is also a message indicating that,
-    along with the value and event that triggered the snapshot:
+    along with the value and event that triggered the snapshot::
+
+      # cat /sys/kernel/debug/tracing/events/tcp/tcp_probe/hist
 
-    # cat /sys/kernel/debug/tracing/events/tcp/tcp_probe/hist
       { dport:       1521 } hitcount:          8
 	changed:         10  snd_wnd:      35456  srtt:     154262  rcv_wnd:      42112
 
@@ -2216,14 +2217,15 @@ The following commonly-used handler.action pairs are available:
       { dport:        443 } hitcount:        211
 	changed:         10  snd_wnd:      26960  srtt:      17379  rcv_wnd:      28800
 
-    Snapshot taken (see tracing/snapshot).  Details:
+    Snapshot taken (see tracing/snapshot).  Details::
+
         triggering value { onchange($cwnd) }:         10
         triggered by event with key: { dport:         80 }
 
-    Totals:
-        Hits: 414
-        Entries: 4
-        Dropped: 0
+      Totals:
+          Hits: 414
+          Entries: 4
+          Dropped: 0
 
     In the above case, the event that triggered the snapshot has the
     key with dport == 80.  If you look at the bucket that has 80 as
@@ -2233,18 +2235,18 @@ The following commonly-used handler.action pairs are available:
     the global snapshot).
 
     And finally, looking at the snapshot data should show at or near
-    the end the event that triggered the snapshot:
+    the end the event that triggered the snapshot::
 
-    # cat /sys/kernel/debug/tracing/snapshot
+      # cat /sys/kernel/debug/tracing/snapshot
 
-       gnome-shell-1261  [006] dN.3    49.823113: sched_stat_runtime: comm=gnome-shell pid=1261 runtime=49347 [ns] vruntime=1835730389 [ns]
-     kworker/u16:4-773   [003] d..3    49.823114: sched_switch: prev_comm=kworker/u16:4 prev_pid=773 prev_prio=120 prev_state=R+ ==> next_comm=kworker/3:2 next_pid=135 next_prio=120
-       gnome-shell-1261  [006] d..3    49.823114: sched_switch: prev_comm=gnome-shell prev_pid=1261 prev_prio=120 prev_state=R+ ==> next_comm=kworker/6:2 next_pid=387 next_prio=120
-       kworker/3:2-135   [003] d..3    49.823118: sched_stat_runtime: comm=kworker/3:2 pid=135 runtime=5339 [ns] vruntime=17815800388 [ns]
-       kworker/6:2-387   [006] d..3    49.823120: sched_stat_runtime: comm=kworker/6:2 pid=387 runtime=9594 [ns] vruntime=14589605367 [ns]
-       kworker/6:2-387   [006] d..3    49.823122: sched_switch: prev_comm=kworker/6:2 prev_pid=387 prev_prio=120 prev_state=R+ ==> next_comm=gnome-shell next_pid=1261 next_prio=120
-       kworker/3:2-135   [003] d..3    49.823123: sched_switch: prev_comm=kworker/3:2 prev_pid=135 prev_prio=120 prev_state=T ==> next_comm=swapper/3 next_pid=0 next_prio=120
-            <idle>-0     [004] ..s7    49.823798: tcp_probe: src=10.0.0.10:54326 dest=23.215.104.193:80 mark=0x0 length=32 snd_nxt=0xe3ae2ff5 snd_una=0xe3ae2ecd snd_cwnd=10 ssthresh=2147483647 snd_wnd=28960 srtt=19604 rcv_wnd=29312
+         gnome-shell-1261  [006] dN.3    49.823113: sched_stat_runtime: comm=gnome-shell pid=1261 runtime=49347 [ns] vruntime=1835730389 [ns]
+       kworker/u16:4-773   [003] d..3    49.823114: sched_switch: prev_comm=kworker/u16:4 prev_pid=773 prev_prio=120 prev_state=R+ ==> next_comm=kworker/3:2 next_pid=135 next_prio=120
+         gnome-shell-1261  [006] d..3    49.823114: sched_switch: prev_comm=gnome-shell prev_pid=1261 prev_prio=120 prev_state=R+ ==> next_comm=kworker/6:2 next_pid=387 next_prio=120
+         kworker/3:2-135   [003] d..3    49.823118: sched_stat_runtime: comm=kworker/3:2 pid=135 runtime=5339 [ns] vruntime=17815800388 [ns]
+         kworker/6:2-387   [006] d..3    49.823120: sched_stat_runtime: comm=kworker/6:2 pid=387 runtime=9594 [ns] vruntime=14589605367 [ns]
+         kworker/6:2-387   [006] d..3    49.823122: sched_switch: prev_comm=kworker/6:2 prev_pid=387 prev_prio=120 prev_state=R+ ==> next_comm=gnome-shell next_pid=1261 next_prio=120
+         kworker/3:2-135   [003] d..3    49.823123: sched_switch: prev_comm=kworker/3:2 prev_pid=135 prev_prio=120 prev_state=T ==> next_comm=swapper/3 next_pid=0 next_prio=120
+              <idle>-0     [004] ..s7    49.823798: tcp_probe: src=10.0.0.10:54326 dest=23.215.104.193:80 mark=0x0 length=32 snd_nxt=0xe3ae2ff5 snd_una=0xe3ae2ecd snd_cwnd=10 ssthresh=2147483647 snd_wnd=28960 srtt=19604 rcv_wnd=29312
 
 3. User space creating a trigger
 --------------------------------
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 03/79] scripts/documentation-file-ref-check: don't parse Next/ dir
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
  2019-04-22 13:26   ` [PATCH v2 01/79] docs: core-api: fix broken references for div64.c and gcd.c Mauro Carvalho Chehab
  2019-04-22 13:26   ` [PATCH v2 02/79] docs: trace: fix some Sphinx warnings Mauro Carvalho Chehab
@ 2019-04-22 13:26   ` Mauro Carvalho Chehab
  2019-04-22 13:26   ` [PATCH v2 04/79] docs: aoe: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
                     ` (74 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:26 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet

If one tries to run this script under linux-next, it would
hit lots of false-positives, due to the tree merges that
are stored under the Next/ directory.

So, add a logic to ignore it.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 scripts/documentation-file-ref-check | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/scripts/documentation-file-ref-check b/scripts/documentation-file-ref-check
index ad9db6821824..bd7d9ab63941 100755
--- a/scripts/documentation-file-ref-check
+++ b/scripts/documentation-file-ref-check
@@ -38,6 +38,9 @@ while (<IN>) {
 	my $f = $1;
 	my $ln = $2;
 
+	# On linux-next, discard the Next/ directory
+	next if ($f =~ m,^Next/,);
+
 	# Makefiles and scripts contain nasty expressions to parse docs
 	next if ($f =~ m/Makefile/ || $f =~ m/\.sh$/);
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 04/79] docs: aoe: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (2 preceding siblings ...)
  2019-04-22 13:26   ` [PATCH v2 03/79] scripts/documentation-file-ref-check: don't parse Next/ dir Mauro Carvalho Chehab
@ 2019-04-22 13:26   ` Mauro Carvalho Chehab
  2019-04-22 13:26   ` [PATCH v2 05/79] docs: arm64: convert docs to ReST and rename to .rst Mauro Carvalho Chehab
                     ` (73 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:26 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet

There are only two files within Documentation/aoe dir that are
documentation. The remaining ones are examples and shell
scripts.

Convert the two AoE files to ReST format, and add the others
as literal, as they're part of the documentation.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/aoe/{aoe.txt => aoe.rst}   | 63 +++++++++++++-----------
 Documentation/aoe/examples.rst           | 23 +++++++++
 Documentation/aoe/index.rst              | 19 +++++++
 Documentation/aoe/{todo.txt => todo.rst} |  3 ++
 Documentation/aoe/udev.txt               |  2 +-
 5 files changed, 81 insertions(+), 29 deletions(-)
 rename Documentation/aoe/{aoe.txt => aoe.rst} (79%)
 create mode 100644 Documentation/aoe/examples.rst
 create mode 100644 Documentation/aoe/index.rst
 rename Documentation/aoe/{todo.txt => todo.rst} (98%)

diff --git a/Documentation/aoe/aoe.txt b/Documentation/aoe/aoe.rst
similarity index 79%
rename from Documentation/aoe/aoe.txt
rename to Documentation/aoe/aoe.rst
index c71487d399d1..58747ecec71d 100644
--- a/Documentation/aoe/aoe.txt
+++ b/Documentation/aoe/aoe.rst
@@ -1,3 +1,6 @@
+Introduction
+============
+
 ATA over Ethernet is a network protocol that provides simple access to
 block storage on the LAN.
 
@@ -22,7 +25,8 @@ document the use of the driver and are not necessary if you install
 the aoetools.
 
 
-CREATING DEVICE NODES
+Creating Device Nodes
+=====================
 
   Users of udev should find the block device nodes created
   automatically, but to create all the necessary device nodes, use the
@@ -38,7 +42,8 @@ CREATING DEVICE NODES
   confusing when an AoE device is not present the first time the a
   command is run but appears a second later.
 
-USING DEVICE NODES
+Using Device Nodes
+==================
 
   "cat /dev/etherd/err" blocks, waiting for error diagnostic output,
   like any retransmitted packets.
@@ -55,7 +60,7 @@ USING DEVICE NODES
   by sysfs counterparts.  Using the commands in aoetools insulates
   users from these implementation details.
 
-  The block devices are named like this:
+  The block devices are named like this::
 
 	e{shelf}.{slot}
 	e{shelf}.{slot}p{part}
@@ -64,7 +69,8 @@ USING DEVICE NODES
   first shelf (shelf address zero).  That's the whole disk.  The first
   partition on that disk would be "e0.2p1".
 
-USING SYSFS
+Using sysfs
+===========
 
   Each aoe block device in /sys/block has the extra attributes of
   state, mac, and netif.  The state attribute is "up" when the device
@@ -78,29 +84,29 @@ USING SYSFS
 
   There is a script in this directory that formats this information in
   a convenient way.  Users with aoetools should use the aoe-stat
-  command.
+  command::
 
-  root@makki root# sh Documentation/aoe/status.sh 
-     e10.0            eth3              up
-     e10.1            eth3              up
-     e10.2            eth3              up
-     e10.3            eth3              up
-     e10.4            eth3              up
-     e10.5            eth3              up
-     e10.6            eth3              up
-     e10.7            eth3              up
-     e10.8            eth3              up
-     e10.9            eth3              up
-      e4.0            eth1              up
-      e4.1            eth1              up
-      e4.2            eth1              up
-      e4.3            eth1              up
-      e4.4            eth1              up
-      e4.5            eth1              up
-      e4.6            eth1              up
-      e4.7            eth1              up
-      e4.8            eth1              up
-      e4.9            eth1              up
+    root@makki root# sh Documentation/aoe/status.sh
+       e10.0            eth3              up
+       e10.1            eth3              up
+       e10.2            eth3              up
+       e10.3            eth3              up
+       e10.4            eth3              up
+       e10.5            eth3              up
+       e10.6            eth3              up
+       e10.7            eth3              up
+       e10.8            eth3              up
+       e10.9            eth3              up
+        e4.0            eth1              up
+        e4.1            eth1              up
+        e4.2            eth1              up
+        e4.3            eth1              up
+        e4.4            eth1              up
+        e4.5            eth1              up
+        e4.6            eth1              up
+        e4.7            eth1              up
+        e4.8            eth1              up
+        e4.9            eth1              up
 
   Use /sys/module/aoe/parameters/aoe_iflist (or better, the driver
   option discussed below) instead of /dev/etherd/interfaces to limit
@@ -113,12 +119,13 @@ USING SYSFS
   for this purpose.  You can also directly use the
   /dev/etherd/discover special file described above.
 
-DRIVER OPTIONS
+Driver Options
+==============
 
   There is a boot option for the built-in aoe driver and a
   corresponding module parameter, aoe_iflist.  Without this option,
   all network interfaces may be used for ATA over Ethernet.  Here is a
-  usage example for the module parameter.
+  usage example for the module parameter::
 
     modprobe aoe_iflist="eth1 eth3"
 
diff --git a/Documentation/aoe/examples.rst b/Documentation/aoe/examples.rst
new file mode 100644
index 000000000000..91f3198e52c1
--- /dev/null
+++ b/Documentation/aoe/examples.rst
@@ -0,0 +1,23 @@
+Example of udev rules
+---------------------
+
+ .. include:: udev.txt
+    :literal:
+
+Example of udev install rules script
+------------------------------------
+
+ .. literalinclude:: udev-install.sh
+    :language: shell
+
+Example script to get status
+----------------------------
+
+ .. literalinclude:: status.sh
+    :language: shell
+
+Example of AoE autoload script
+------------------------------
+
+ .. literalinclude:: autoload.sh
+    :language: shell
diff --git a/Documentation/aoe/index.rst b/Documentation/aoe/index.rst
new file mode 100644
index 000000000000..4394b9b7913c
--- /dev/null
+++ b/Documentation/aoe/index.rst
@@ -0,0 +1,19 @@
+:orphan:
+
+=======================
+ATA over Ethernet (AoE)
+=======================
+
+.. toctree::
+    :maxdepth: 1
+
+    aoe
+    todo
+    examples
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/aoe/todo.txt b/Documentation/aoe/todo.rst
similarity index 98%
rename from Documentation/aoe/todo.txt
rename to Documentation/aoe/todo.rst
index c09dfad4aed8..dea8db5a33e1 100644
--- a/Documentation/aoe/todo.txt
+++ b/Documentation/aoe/todo.rst
@@ -1,3 +1,6 @@
+TODO
+====
+
 There is a potential for deadlock when allocating a struct sk_buff for
 data that needs to be written out to aoe storage.  If the data is
 being written from a dirty page in order to free that page, and if
diff --git a/Documentation/aoe/udev.txt b/Documentation/aoe/udev.txt
index 1f06daf03f5b..54feda5a0772 100644
--- a/Documentation/aoe/udev.txt
+++ b/Documentation/aoe/udev.txt
@@ -11,7 +11,7 @@
 #   udev_rules="/etc/udev/rules.d/"
 #   bash# ls /etc/udev/rules.d/
 #   10-wacom.rules  50-udev.rules
-#   bash# cp /path/to/linux-2.6.xx/Documentation/aoe/udev.txt \
+#   bash# cp /path/to/linux/Documentation/aoe/udev.txt \
 #           /etc/udev/rules.d/60-aoe.rules
 #  
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 05/79] docs: arm64: convert docs to ReST and rename to .rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (3 preceding siblings ...)
  2019-04-22 13:26   ` [PATCH v2 04/79] docs: aoe: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
@ 2019-04-22 13:26   ` Mauro Carvalho Chehab
  2019-04-22 13:26   ` [PATCH v2 06/79] docs: cdrom-standard.tex: convert from LaTeX to ReST Mauro Carvalho Chehab
                     ` (72 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:26 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Catalin Marinas, Will Deacon, Harry Wei,
	Alex Shi, Paolo Bonzini, Radim Krčmář,
	Ard Biesheuvel, linux-arm-kernel, kvm, linux-efi

The documentation is in a format that is very close to ReST format.

The conversion is actually:
  - add blank lines in order to identify paragraphs;
  - fixing tables markups;
  - adding some lists markups;
  - marking literal blocks;
  - adjust some title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 ...object_usage.txt => acpi_object_usage.rst} | 288 ++++++++++++------
 .../arm64/{arm-acpi.txt => arm-acpi.rst}      | 155 +++++-----
 .../arm64/{booting.txt => booting.rst}        |  91 ++++--
 ...egisters.txt => cpu-feature-registers.rst} | 190 ++++++------
 .../arm64/{elf_hwcaps.txt => elf_hwcaps.rst}  |  56 +---
 .../{hugetlbpage.txt => hugetlbpage.rst}      |   7 +-
 Documentation/arm64/index.rst                 |  28 ++
 ...structions.txt => legacy_instructions.rst} |  43 ++-
 Documentation/arm64/memory.rst                |  98 ++++++
 Documentation/arm64/memory.txt                |  97 ------
 ...ication.txt => pointer-authentication.rst} |   2 +
 ...{silicon-errata.txt => silicon-errata.rst} |  63 +++-
 Documentation/arm64/{sve.txt => sve.rst}      |  12 +-
 ...agged-pointers.txt => tagged-pointers.rst} |   6 +-
 .../translations/zh_CN/arm64/booting.txt      |   4 +-
 .../zh_CN/arm64/legacy_instructions.txt       |   4 +-
 .../translations/zh_CN/arm64/memory.txt       |   4 +-
 .../zh_CN/arm64/silicon-errata.txt            |   4 +-
 .../zh_CN/arm64/tagged-pointers.txt           |   4 +-
 Documentation/virtual/kvm/api.txt             |   2 +-
 arch/arm64/include/asm/efi.h                  |   2 +-
 arch/arm64/include/asm/image.h                |   2 +-
 arch/arm64/include/uapi/asm/sigcontext.h      |   2 +-
 arch/arm64/kernel/kexec_image.c               |   2 +-
 24 files changed, 694 insertions(+), 472 deletions(-)
 rename Documentation/arm64/{acpi_object_usage.txt => acpi_object_usage.rst} (84%)
 rename Documentation/arm64/{arm-acpi.txt => arm-acpi.rst} (86%)
 rename Documentation/arm64/{booting.txt => booting.rst} (86%)
 rename Documentation/arm64/{cpu-feature-registers.txt => cpu-feature-registers.rst} (66%)
 rename Documentation/arm64/{elf_hwcaps.txt => elf_hwcaps.rst} (92%)
 rename Documentation/arm64/{hugetlbpage.txt => hugetlbpage.rst} (86%)
 create mode 100644 Documentation/arm64/index.rst
 rename Documentation/arm64/{legacy_instructions.txt => legacy_instructions.rst} (73%)
 create mode 100644 Documentation/arm64/memory.rst
 delete mode 100644 Documentation/arm64/memory.txt
 rename Documentation/arm64/{pointer-authentication.txt => pointer-authentication.rst} (98%)
 rename Documentation/arm64/{silicon-errata.txt => silicon-errata.rst} (55%)
 rename Documentation/arm64/{sve.txt => sve.rst} (98%)
 rename Documentation/arm64/{tagged-pointers.txt => tagged-pointers.rst} (94%)

diff --git a/Documentation/arm64/acpi_object_usage.txt b/Documentation/arm64/acpi_object_usage.rst
similarity index 84%
rename from Documentation/arm64/acpi_object_usage.txt
rename to Documentation/arm64/acpi_object_usage.rst
index c77010c5c1f0..d51b69dc624d 100644
--- a/Documentation/arm64/acpi_object_usage.txt
+++ b/Documentation/arm64/acpi_object_usage.rst
@@ -1,5 +1,7 @@
+===========
 ACPI Tables
------------
+===========
+
 The expectations of individual ACPI tables are discussed in the list that
 follows.
 
@@ -11,54 +13,71 @@ outside of the UEFI Forum (see Section 5.2.6 of the specification).
 
 For ACPI on arm64, tables also fall into the following categories:
 
-       -- Required: DSDT, FADT, GTDT, MADT, MCFG, RSDP, SPCR, XSDT
+       -  Required: DSDT, FADT, GTDT, MADT, MCFG, RSDP, SPCR, XSDT
 
-       -- Recommended: BERT, EINJ, ERST, HEST, PCCT, SSDT
+       -  Recommended: BERT, EINJ, ERST, HEST, PCCT, SSDT
 
-       -- Optional: BGRT, CPEP, CSRT, DBG2, DRTM, ECDT, FACS, FPDT, IORT,
+       -  Optional: BGRT, CPEP, CSRT, DBG2, DRTM, ECDT, FACS, FPDT, IORT,
           MCHI, MPST, MSCT, NFIT, PMTT, RASF, SBST, SLIT, SPMI, SRAT, STAO,
 	  TCPA, TPM2, UEFI, XENV
 
-       -- Not supported: BOOT, DBGP, DMAR, ETDT, HPET, IBFT, IVRS, LPIT,
+       -  Not supported: BOOT, DBGP, DMAR, ETDT, HPET, IBFT, IVRS, LPIT,
           MSDM, OEMx, PSDT, RSDT, SLIC, WAET, WDAT, WDRT, WPBT
 
+====== ========================================================================
 Table  Usage for ARMv8 Linux
------  ----------------------------------------------------------------
+====== ========================================================================
 BERT   Section 18.3 (signature == "BERT")
-       == Boot Error Record Table ==
+
+       **Boot Error Record Table**
+
        Must be supplied if RAS support is provided by the platform.  It
        is recommended this table be supplied.
 
 BOOT   Signature Reserved (signature == "BOOT")
-       == simple BOOT flag table ==
+
+       **simple BOOT flag table**
+
        Microsoft only table, will not be supported.
 
 BGRT   Section 5.2.22 (signature == "BGRT")
-       == Boot Graphics Resource Table ==
+
+       **Boot Graphics Resource Table**
+
        Optional, not currently supported, with no real use-case for an
        ARM server.
 
 CPEP   Section 5.2.18 (signature == "CPEP")
-       == Corrected Platform Error Polling table ==
+
+       **Corrected Platform Error Polling table**
+
        Optional, not currently supported, and not recommended until such
        time as ARM-compatible hardware is available, and the specification
        suitably modified.
 
 CSRT   Signature Reserved (signature == "CSRT")
-       == Core System Resources Table ==
+
+       **Core System Resources Table**
+
        Optional, not currently supported.
 
 DBG2   Signature Reserved (signature == "DBG2")
-       == DeBuG port table 2 ==
+
+       **DeBuG port table 2**
+
        License has changed and should be usable.  Optional if used instead
        of earlycon=<device> on the command line.
 
 DBGP   Signature Reserved (signature == "DBGP")
-       == DeBuG Port table ==
+
+       **DeBuG Port table**
+
        Microsoft only table, will not be supported.
 
 DSDT   Section 5.2.11.1 (signature == "DSDT")
-       == Differentiated System Description Table ==
+
+       **Differentiated System Description Table**
+
        A DSDT is required; see also SSDT.
 
        ACPI tables contain only one DSDT but can contain one or more SSDTs,
@@ -66,22 +85,30 @@ DSDT   Section 5.2.11.1 (signature == "DSDT")
        but cannot modify or replace anything in the DSDT.
 
 DMAR   Signature Reserved (signature == "DMAR")
-       == DMA Remapping table ==
+
+       **DMA Remapping table**
+
        x86 only table, will not be supported.
 
 DRTM   Signature Reserved (signature == "DRTM")
-       == Dynamic Root of Trust for Measurement table ==
+
+       **Dynamic Root of Trust for Measurement table**
+
        Optional, not currently supported.
 
 ECDT   Section 5.2.16 (signature == "ECDT")
-       == Embedded Controller Description Table ==
+
+       **Embedded Controller Description Table**
+
        Optional, not currently supported, but could be used on ARM if and
        only if one uses the GPE_BIT field to represent an IRQ number, since
        there are no GPE blocks defined in hardware reduced mode.  This would
        need to be modified in the ACPI specification.
 
 EINJ   Section 18.6 (signature == "EINJ")
-       == Error Injection table ==
+
+       **Error Injection table**
+
        This table is very useful for testing platform response to error
        conditions; it allows one to inject an error into the system as
        if it had actually occurred.  However, this table should not be
@@ -89,27 +116,35 @@ EINJ   Section 18.6 (signature == "EINJ")
        and executed with the ACPICA tools only during testing.
 
 ERST   Section 18.5 (signature == "ERST")
-       == Error Record Serialization Table ==
+
+       **Error Record Serialization Table**
+
        On a platform supports RAS, this table must be supplied if it is not
        UEFI-based; if it is UEFI-based, this table may be supplied. When this
        table is not present, UEFI run time service will be utilized to save
        and retrieve hardware error information to and from a persistent store.
 
 ETDT   Signature Reserved (signature == "ETDT")
-       == Event Timer Description Table ==
+
+       **Event Timer Description Table**
+
        Obsolete table, will not be supported.
 
 FACS   Section 5.2.10 (signature == "FACS")
-       == Firmware ACPI Control Structure ==
+
+       **Firmware ACPI Control Structure**
+
        It is unlikely that this table will be terribly useful.  If it is
        provided, the Global Lock will NOT be used since it is not part of
        the hardware reduced profile, and only 64-bit address fields will
        be considered valid.
 
 FADT   Section 5.2.9 (signature == "FACP")
-       == Fixed ACPI Description Table ==
+
+       **Fixed ACPI Description Table**
        Required for arm64.
 
+
        The HW_REDUCED_ACPI flag must be set.  All of the fields that are
        to be ignored when HW_REDUCED_ACPI is set are expected to be set to
        zero.
@@ -118,22 +153,28 @@ FADT   Section 5.2.9 (signature == "FACP")
        used, not FIRMWARE_CTRL.
 
        If PSCI is used (as is recommended), make sure that ARM_BOOT_ARCH is
-       filled in properly -- that the PSCI_COMPLIANT flag is set and that
+       filled in properly - that the PSCI_COMPLIANT flag is set and that
        PSCI_USE_HVC is set or unset as needed (see table 5-37).
 
        For the DSDT that is also required, the X_DSDT field is to be used,
        not the DSDT field.
 
 FPDT   Section 5.2.23 (signature == "FPDT")
-       == Firmware Performance Data Table ==
+
+       **Firmware Performance Data Table**
+
        Optional, not currently supported.
 
 GTDT   Section 5.2.24 (signature == "GTDT")
-       == Generic Timer Description Table ==
+
+       **Generic Timer Description Table**
+
        Required for arm64.
 
 HEST   Section 18.3.2 (signature == "HEST")
-       == Hardware Error Source Table ==
+
+       **Hardware Error Source Table**
+
        ARM-specific error sources have been defined; please use those or the
        PCI types such as type 6 (AER Root Port), 7 (AER Endpoint), or 8 (AER
        Bridge), or use type 9 (Generic Hardware Error Source).  Firmware first
@@ -144,122 +185,174 @@ HEST   Section 18.3.2 (signature == "HEST")
        is recommended this table be supplied.
 
 HPET   Signature Reserved (signature == "HPET")
-       == High Precision Event timer Table ==
+
+       **High Precision Event timer Table**
+
        x86 only table, will not be supported.
 
 IBFT   Signature Reserved (signature == "IBFT")
-       == iSCSI Boot Firmware Table ==
+
+       **iSCSI Boot Firmware Table**
+
        Microsoft defined table, support TBD.
 
 IORT   Signature Reserved (signature == "IORT")
-       == Input Output Remapping Table ==
+
+       **Input Output Remapping Table**
+
        arm64 only table, required in order to describe IO topology, SMMUs,
        and GIC ITSs, and how those various components are connected together,
        such as identifying which components are behind which SMMUs/ITSs.
        This table will only be required on certain SBSA platforms (e.g.,
-       when using GICv3-ITS and an SMMU); on SBSA Level 0 platforms, it 
+       when using GICv3-ITS and an SMMU); on SBSA Level 0 platforms, it
        remains optional.
 
 IVRS   Signature Reserved (signature == "IVRS")
-       == I/O Virtualization Reporting Structure ==
+
+       **I/O Virtualization Reporting Structure**
+
        x86_64 (AMD) only table, will not be supported.
 
 LPIT   Signature Reserved (signature == "LPIT")
-       == Low Power Idle Table ==
+
+       **Low Power Idle Table**
+
        x86 only table as of ACPI 5.1; starting with ACPI 6.0, processor
        descriptions and power states on ARM platforms should use the DSDT
        and define processor container devices (_HID ACPI0010, Section 8.4,
        and more specifically 8.4.3 and and 8.4.4).
 
 MADT   Section 5.2.12 (signature == "APIC")
-       == Multiple APIC Description Table ==
+
+       **Multiple APIC Description Table**
+
        Required for arm64.  Only the GIC interrupt controller structures
        should be used (types 0xA - 0xF).
 
 MCFG   Signature Reserved (signature == "MCFG")
-       == Memory-mapped ConFiGuration space ==
+
+       **Memory-mapped ConFiGuration space**
+
        If the platform supports PCI/PCIe, an MCFG table is required.
 
 MCHI   Signature Reserved (signature == "MCHI")
-       == Management Controller Host Interface table ==
+
+       **Management Controller Host Interface table**
+
        Optional, not currently supported.
 
 MPST   Section 5.2.21 (signature == "MPST")
-       == Memory Power State Table ==
+
+       **Memory Power State Table**
+
        Optional, not currently supported.
 
 MSCT   Section 5.2.19 (signature == "MSCT")
-       == Maximum System Characteristic Table ==
+
+       **Maximum System Characteristic Table**
+
        Optional, not currently supported.
 
 MSDM   Signature Reserved (signature == "MSDM")
-       == Microsoft Data Management table ==
+
+       **Microsoft Data Management table**
+
        Microsoft only table, will not be supported.
 
 NFIT   Section 5.2.25 (signature == "NFIT")
-       == NVDIMM Firmware Interface Table ==
+
+       **NVDIMM Firmware Interface Table**
+
        Optional, not currently supported.
 
 OEMx   Signature of "OEMx" only
-       == OEM Specific Tables ==
+
+       **OEM Specific Tables**
+
        All tables starting with a signature of "OEM" are reserved for OEM
        use.  Since these are not meant to be of general use but are limited
        to very specific end users, they are not recommended for use and are
        not supported by the kernel for arm64.
 
 PCCT   Section 14.1 (signature == "PCCT)
-       == Platform Communications Channel Table ==
+
+       **Platform Communications Channel Table**
+
        Recommend for use on arm64; use of PCC is recommended when using CPPC
        to control performance and power for platform processors.
 
 PMTT   Section 5.2.21.12 (signature == "PMTT")
-       == Platform Memory Topology Table ==
+
+       **Platform Memory Topology Table**
+
        Optional, not currently supported.
 
 PSDT   Section 5.2.11.3 (signature == "PSDT")
-       == Persistent System Description Table ==
+
+       **Persistent System Description Table**
+
        Obsolete table, will not be supported.
 
 RASF   Section 5.2.20 (signature == "RASF")
-       == RAS Feature table ==
+
+       **RAS Feature table**
+
        Optional, not currently supported.
 
 RSDP   Section 5.2.5 (signature == "RSD PTR")
-       == Root System Description PoinTeR ==
+
+       **Root System Description PoinTeR**
+
        Required for arm64.
 
 RSDT   Section 5.2.7 (signature == "RSDT")
-       == Root System Description Table ==
+
+       **Root System Description Table**
+
        Since this table can only provide 32-bit addresses, it is deprecated
        on arm64, and will not be used.  If provided, it will be ignored.
 
 SBST   Section 5.2.14 (signature == "SBST")
-       == Smart Battery Subsystem Table ==
+
+       **Smart Battery Subsystem Table**
+
        Optional, not currently supported.
 
 SLIC   Signature Reserved (signature == "SLIC")
-       == Software LIcensing table ==
+
+       **Software LIcensing table**
+
        Microsoft only table, will not be supported.
 
 SLIT   Section 5.2.17 (signature == "SLIT")
-       == System Locality distance Information Table ==
+
+       **System Locality distance Information Table**
+
        Optional in general, but required for NUMA systems.
 
 SPCR   Signature Reserved (signature == "SPCR")
-       == Serial Port Console Redirection table ==
+
+       **Serial Port Console Redirection table**
+
        Required for arm64.
 
 SPMI   Signature Reserved (signature == "SPMI")
-       == Server Platform Management Interface table ==
+
+       **Server Platform Management Interface table**
+
        Optional, not currently supported.
 
 SRAT   Section 5.2.16 (signature == "SRAT")
-       == System Resource Affinity Table ==
+
+       **System Resource Affinity Table**
+
        Optional, but if used, only the GICC Affinity structures are read.
        To support arm64 NUMA, this table is required.
 
 SSDT   Section 5.2.11.2 (signature == "SSDT")
-       == Secondary System Description Table ==
+
+       **Secondary System Description Table**
+
        These tables are a continuation of the DSDT; these are recommended
        for use with devices that can be added to a running system, but can
        also serve the purpose of dividing up device descriptions into more
@@ -272,49 +365,69 @@ SSDT   Section 5.2.11.2 (signature == "SSDT")
        one DSDT but can contain many SSDTs.
 
 STAO   Signature Reserved (signature == "STAO")
-       == _STA Override table ==
+
+       **_STA Override table**
+
        Optional, but only necessary in virtualized environments in order to
        hide devices from guest OSs.
 
 TCPA   Signature Reserved (signature == "TCPA")
-       == Trusted Computing Platform Alliance table ==
+
+       **Trusted Computing Platform Alliance table**
+
        Optional, not currently supported, and may need changes to fully
        interoperate with arm64.
 
 TPM2   Signature Reserved (signature == "TPM2")
-       == Trusted Platform Module 2 table ==
+
+       **Trusted Platform Module 2 table**
+
        Optional, not currently supported, and may need changes to fully
        interoperate with arm64.
 
 UEFI   Signature Reserved (signature == "UEFI")
-       == UEFI ACPI data table ==
+
+       **UEFI ACPI data table**
+
        Optional, not currently supported.  No known use case for arm64,
        at present.
 
 WAET   Signature Reserved (signature == "WAET")
-       == Windows ACPI Emulated devices Table ==
+
+       **Windows ACPI Emulated devices Table**
+
        Microsoft only table, will not be supported.
 
 WDAT   Signature Reserved (signature == "WDAT")
-       == Watch Dog Action Table ==
+
+       **Watch Dog Action Table**
+
        Microsoft only table, will not be supported.
 
 WDRT   Signature Reserved (signature == "WDRT")
-       == Watch Dog Resource Table ==
+
+       **Watch Dog Resource Table**
+
        Microsoft only table, will not be supported.
 
 WPBT   Signature Reserved (signature == "WPBT")
-       == Windows Platform Binary Table ==
+
+       **Windows Platform Binary Table**
+
        Microsoft only table, will not be supported.
 
 XENV   Signature Reserved (signature == "XENV")
-       == Xen project table ==
+
+       **Xen project table**
+
        Optional, used only by Xen at present.
 
 XSDT   Section 5.2.8 (signature == "XSDT")
-       == eXtended System Description Table ==
+
+       **eXtended System Description Table**
+
        Required for arm64.
-
+====== ========================================================================
 
 ACPI Objects
 ------------
@@ -323,10 +436,11 @@ shown in the list that follows; any object not explicitly mentioned below
 should be used as needed for a particular platform or particular subsystem,
 such as power management or PCI.
 
+===== ================ ========================================================
 Name   Section         Usage for ARMv8 Linux
-----   ------------    -------------------------------------------------
+===== ================ ========================================================
 _CCA   6.2.17          This method must be defined for all bus masters
-                       on arm64 -- there are no assumptions made about
+                       on arm64 - there are no assumptions made about
                        whether such devices are cache coherent or not.
                        The _CCA value is inherited by all descendants of
                        these devices so it does not need to be repeated.
@@ -422,8 +536,8 @@ _OSC   6.2.11          This method can be a global method in ACPI (i.e.,
                        by the kernel community, then register it with the
                        UEFI Forum.
 
-\_OSI  5.7.2           Deprecated on ARM64.  As far as ACPI firmware is 
-		       concerned, _OSI is not to be used to determine what 
+\_OSI  5.7.2           Deprecated on ARM64.  As far as ACPI firmware is
+		       concerned, _OSI is not to be used to determine what
 		       sort of system is being used or what functionality
 		       is provided.  The _OSC method is to be used instead.
 
@@ -447,7 +561,7 @@ _PSx   7.3.2-5         Use as needed; power management specific.  If _PS0 is
                        usage, change them in these methods.
 
 _RDI   8.4.4.4         Recommended for use with processor definitions (_HID
-		       ACPI0010) on arm64.  This should only be used in 
+		       ACPI0010) on arm64.  This should only be used in
 		       conjunction with _LPI.
 
 \_REV  5.7.4           Always returns the latest version of ACPI supported.
@@ -476,6 +590,7 @@ _SWS   7.4.3           Use as needed; power management specific; this may
 
 _UID   6.1.12          Recommended for distinguishing devices of the same
                        class; define it if at all possible.
+===== ================ ========================================================
 
 
 
@@ -488,7 +603,7 @@ platforms, ACPI events must be signaled differently.
 
 There are two options: GPIO-signaled interrupts (Section 5.6.5), and
 interrupt-signaled events (Section 5.6.9).  Interrupt-signaled events are a
-new feature in the ACPI 6.1 specification.  Either -- or both -- can be used
+new feature in the ACPI 6.1 specification.  Either - or both - can be used
 on a given platform, and which to use may be dependent of limitations in any
 given SoC.  If possible, interrupt-signaled events are recommended.
 
@@ -564,39 +679,40 @@ supported.
 
 The following classes of objects are not supported:
 
-       -- Section 9.2: ambient light sensor devices
+       -  Section 9.2: ambient light sensor devices
 
-       -- Section 9.3: battery devices
+       -  Section 9.3: battery devices
 
-       -- Section 9.4: lids (e.g., laptop lids)
+       -  Section 9.4: lids (e.g., laptop lids)
 
-       -- Section 9.8.2: IDE controllers
+       -  Section 9.8.2: IDE controllers
 
-       -- Section 9.9: floppy controllers
+       -  Section 9.9: floppy controllers
 
-       -- Section 9.10: GPE block devices
+       -  Section 9.10: GPE block devices
 
-       -- Section 9.15: PC/AT RTC/CMOS devices
+       -  Section 9.15: PC/AT RTC/CMOS devices
 
-       -- Section 9.16: user presence detection devices
+       -  Section 9.16: user presence detection devices
 
-       -- Section 9.17: I/O APIC devices; all GICs must be enumerable via MADT
+       -  Section 9.17: I/O APIC devices; all GICs must be enumerable via MADT
 
-       -- Section 9.18: time and alarm devices (see 9.15)
+       -  Section 9.18: time and alarm devices (see 9.15)
 
-       -- Section 10: power source and power meter devices
+       -  Section 10: power source and power meter devices
 
-       -- Section 11: thermal management
+       -  Section 11: thermal management
 
-       -- Section 12: embedded controllers interface
+       -  Section 12: embedded controllers interface
 
-       -- Section 13: SMBus interfaces
+       -  Section 13: SMBus interfaces
 
 
 This also means that there is no support for the following objects:
 
+====   =========================== ====   ==========
 Name   Section                     Name   Section
-----   ------------                ----   ------------
+====   =========================== ====   ==========
 _ALC   9.3.4                       _FDM   9.10.3
 _ALI   9.3.2                       _FIX   6.2.7
 _ALP   9.3.6                       _GAI   10.4.5
@@ -619,4 +735,4 @@ _DCK   6.5.2                       _UPD   9.16.1
 _EC    12.12                       _UPP   9.16.2
 _FDE   9.10.1                      _WPC   10.5.2
 _FDI   9.10.2                      _WPP   10.5.3
-
+====   =========================== ====   ==========
diff --git a/Documentation/arm64/arm-acpi.txt b/Documentation/arm64/arm-acpi.rst
similarity index 86%
rename from Documentation/arm64/arm-acpi.txt
rename to Documentation/arm64/arm-acpi.rst
index 1a74a041a443..872dbbc73d4a 100644
--- a/Documentation/arm64/arm-acpi.txt
+++ b/Documentation/arm64/arm-acpi.rst
@@ -1,5 +1,7 @@
+=====================
 ACPI on ARMv8 Servers
----------------------
+=====================
+
 ACPI can be used for ARMv8 general purpose servers designed to follow
 the ARM SBSA (Server Base System Architecture) [0] and SBBR (Server
 Base Boot Requirements) [1] specifications.  Please note that the SBBR
@@ -34,28 +36,28 @@ of the summary text almost directly, to be honest.
 
 The short form of the rationale for ACPI on ARM is:
 
--- ACPI’s byte code (AML) allows the platform to encode hardware behavior,
+-  ACPI’s byte code (AML) allows the platform to encode hardware behavior,
    while DT explicitly does not support this.  For hardware vendors, being
    able to encode behavior is a key tool used in supporting operating
    system releases on new hardware.
 
--- ACPI’s OSPM defines a power management model that constrains what the
+-  ACPI’s OSPM defines a power management model that constrains what the
    platform is allowed to do into a specific model, while still providing
    flexibility in hardware design.
 
--- In the enterprise server environment, ACPI has established bindings (such
+-  In the enterprise server environment, ACPI has established bindings (such
    as for RAS) which are currently used in production systems.  DT does not.
    Such bindings could be defined in DT at some point, but doing so means ARM
    and x86 would end up using completely different code paths in both firmware
    and the kernel.
 
--- Choosing a single interface to describe the abstraction between a platform
+-  Choosing a single interface to describe the abstraction between a platform
    and an OS is important.  Hardware vendors would not be required to implement
    both DT and ACPI if they want to support multiple operating systems.  And,
    agreeing on a single interface instead of being fragmented into per OS
    interfaces makes for better interoperability overall.
 
--- The new ACPI governance process works well and Linux is now at the same
+-  The new ACPI governance process works well and Linux is now at the same
    table as hardware vendors and other OS vendors.  In fact, there is no
    longer any reason to feel that ACPI only belongs to Windows or that
    Linux is in any way secondary to Microsoft in this arena.  The move of
@@ -169,31 +171,31 @@ For the ACPI core to operate properly, and in turn provide the information
 the kernel needs to configure devices, it expects to find the following
 tables (all section numbers refer to the ACPI 6.1 specification):
 
-    -- RSDP (Root System Description Pointer), section 5.2.5
+    -  RSDP (Root System Description Pointer), section 5.2.5
 
-    -- XSDT (eXtended System Description Table), section 5.2.8
+    -  XSDT (eXtended System Description Table), section 5.2.8
 
-    -- FADT (Fixed ACPI Description Table), section 5.2.9
+    -  FADT (Fixed ACPI Description Table), section 5.2.9
 
-    -- DSDT (Differentiated System Description Table), section
+    -  DSDT (Differentiated System Description Table), section
        5.2.11.1
 
-    -- MADT (Multiple APIC Description Table), section 5.2.12
+    -  MADT (Multiple APIC Description Table), section 5.2.12
 
-    -- GTDT (Generic Timer Description Table), section 5.2.24
+    -  GTDT (Generic Timer Description Table), section 5.2.24
 
-    -- If PCI is supported, the MCFG (Memory mapped ConFiGuration
+    -  If PCI is supported, the MCFG (Memory mapped ConFiGuration
        Table), section 5.2.6, specifically Table 5-31.
 
-    -- If booting without a console=<device> kernel parameter is
+    -  If booting without a console=<device> kernel parameter is
        supported, the SPCR (Serial Port Console Redirection table),
        section 5.2.6, specifically Table 5-31.
 
-    -- If necessary to describe the I/O topology, SMMUs and GIC ITSs,
+    -  If necessary to describe the I/O topology, SMMUs and GIC ITSs,
        the IORT (Input Output Remapping Table, section 5.2.6, specifically
        Table 5-31).
 
-    -- If NUMA is supported, the SRAT (System Resource Affinity Table)
+    -  If NUMA is supported, the SRAT (System Resource Affinity Table)
        and SLIT (System Locality distance Information Table), sections
        5.2.16 and 5.2.17, respectively.
 
@@ -269,9 +271,9 @@ describes how to define the structure of an object returned via _DSD, and
 how specific data structures are defined by specific UUIDs.  Linux should
 only use the _DSD Device Properties UUID [5]:
 
-   -- UUID: daffd814-6eba-4d8c-8a91-bc9bbf4aa301
+   - UUID: daffd814-6eba-4d8c-8a91-bc9bbf4aa301
 
-   -- http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
+   - http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
 
 The UEFI Forum provides a mechanism for registering device properties [4]
 so that they may be used across all operating systems supporting ACPI.
@@ -327,10 +329,10 @@ turning a device full off.
 
 There are two options for using those Power Resources.  They can:
 
-   -- be managed in a _PSx method which gets called on entry to power
+   -  be managed in a _PSx method which gets called on entry to power
       state Dx.
 
-   -- be declared separately as power resources with their own _ON and _OFF
+   -  be declared separately as power resources with their own _ON and _OFF
       methods.  They are then tied back to D-states for a particular device
       via _PRx which specifies which power resources a device needs to be on
       while in Dx.  Kernel then tracks number of devices using a power resource
@@ -339,16 +341,16 @@ There are two options for using those Power Resources.  They can:
 The kernel ACPI code will also assume that the _PSx methods follow the normal
 ACPI rules for such methods:
 
-   -- If either _PS0 or _PS3 is implemented, then the other method must also
+   -  If either _PS0 or _PS3 is implemented, then the other method must also
       be implemented.
 
-   -- If a device requires usage or setup of a power resource when on, the ASL
+   -  If a device requires usage or setup of a power resource when on, the ASL
       should organize that it is allocated/enabled using the _PS0 method.
 
-   -- Resources allocated or enabled in the _PS0 method should be disabled
+   -  Resources allocated or enabled in the _PS0 method should be disabled
       or de-allocated in the _PS3 method.
 
-   -- Firmware will leave the resources in a reasonable state before handing
+   -  Firmware will leave the resources in a reasonable state before handing
       over control to the kernel.
 
 Such code in _PSx methods will of course be very platform specific.  But,
@@ -394,52 +396,52 @@ else must be discovered by the driver probe function.  Then, have the rest
 of the driver operate off of the contents of that struct.  Doing so should
 allow most divergence between ACPI and DT functionality to be kept local to
 the probe function instead of being scattered throughout the driver.  For
-example:
+example::
 
-static int device_probe_dt(struct platform_device *pdev)
-{
-       /* DT specific functionality */
-       ...
-}
+  static int device_probe_dt(struct platform_device *pdev)
+  {
+         /* DT specific functionality */
+         ...
+  }
 
-static int device_probe_acpi(struct platform_device *pdev)
-{
-       /* ACPI specific functionality */
-       ...
-}
+  static int device_probe_acpi(struct platform_device *pdev)
+  {
+         /* ACPI specific functionality */
+         ...
+  }
 
-static int device_probe(struct platform_device *pdev)
-{
-       ...
-       struct device_node node = pdev->dev.of_node;
-       ...
+  static int device_probe(struct platform_device *pdev)
+  {
+         ...
+         struct device_node node = pdev->dev.of_node;
+         ...
 
-       if (node)
-               ret = device_probe_dt(pdev);
-       else if (ACPI_HANDLE(&pdev->dev))
-               ret = device_probe_acpi(pdev);
-       else
-               /* other initialization */
-               ...
-       /* Continue with any generic probe operations */
-       ...
-}
+         if (node)
+                 ret = device_probe_dt(pdev);
+         else if (ACPI_HANDLE(&pdev->dev))
+                 ret = device_probe_acpi(pdev);
+         else
+                 /* other initialization */
+                 ...
+         /* Continue with any generic probe operations */
+         ...
+  }
 
 DO keep the MODULE_DEVICE_TABLE entries together in the driver to make it
 clear the different names the driver is probed for, both from DT and from
-ACPI:
+ACPI::
 
-static struct of_device_id virtio_mmio_match[] = {
-        { .compatible = "virtio,mmio", },
-        { }
-};
-MODULE_DEVICE_TABLE(of, virtio_mmio_match);
+  static struct of_device_id virtio_mmio_match[] = {
+          { .compatible = "virtio,mmio", },
+          { }
+  };
+  MODULE_DEVICE_TABLE(of, virtio_mmio_match);
 
-static const struct acpi_device_id virtio_mmio_acpi_match[] = {
-        { "LNRO0005", },
-        { }
-};
-MODULE_DEVICE_TABLE(acpi, virtio_mmio_acpi_match);
+  static const struct acpi_device_id virtio_mmio_acpi_match[] = {
+          { "LNRO0005", },
+          { }
+  };
+  MODULE_DEVICE_TABLE(acpi, virtio_mmio_acpi_match);
 
 
 ASWG
@@ -471,7 +473,8 @@ Linux Code
 Individual items specific to Linux on ARM, contained in the the Linux
 source code, are in the list that follows:
 
-ACPI_OS_NAME           This macro defines the string to be returned when
+ACPI_OS_NAME
+                       This macro defines the string to be returned when
                        an ACPI method invokes the _OS method.  On ARM64
                        systems, this macro will be "Linux" by default.
                        The command line parameter acpi_os=<string>
@@ -482,38 +485,44 @@ ACPI_OS_NAME           This macro defines the string to be returned when
 ACPI Objects
 ------------
 Detailed expectations for ACPI tables and object are listed in the file
-Documentation/arm64/acpi_object_usage.txt.
+Documentation/arm64/acpi_object_usage.rst.
 
 
 References
 ----------
-[0] http://silver.arm.com -- document ARM-DEN-0029, or newer
+[0] http://silver.arm.com
+    document ARM-DEN-0029, or newer:
     "Server Base System Architecture", version 2.3, dated 27 Mar 2014
 
 [1] http://infocenter.arm.com/help/topic/com.arm.doc.den0044a/Server_Base_Boot_Requirements.pdf
     Document ARM-DEN-0044A, or newer: "Server Base Boot Requirements, System
     Software on ARM Platforms", dated 16 Aug 2014
 
-[2] http://www.secretlab.ca/archives/151, 10 Jan 2015, Copyright (c) 2015,
+[2] http://www.secretlab.ca/archives/151,
+    10 Jan 2015, Copyright (c) 2015,
     Linaro Ltd., written by Grant Likely.
 
-[3] AMD ACPI for Seattle platform documentation:
+[3] AMD ACPI for Seattle platform documentation
     http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/Seattle_ACPI_Guide.pdf
 
-[4] http://www.uefi.org/acpi -- please see the link for the "ACPI _DSD Device
+
+[4] http://www.uefi.org/acpi
+    please see the link for the "ACPI _DSD Device
     Property Registry Instructions"
 
-[5] http://www.uefi.org/acpi -- please see the link for the "_DSD (Device
+[5] http://www.uefi.org/acpi
+    please see the link for the "_DSD (Device
     Specific Data) Implementation Guide"
 
-[6] Kernel code for the unified device property interface can be found in
+[6] Kernel code for the unified device
+    property interface can be found in
     include/linux/property.h and drivers/base/property.c.
 
 
 Authors
 -------
-Al Stone <al.stone@linaro.org>
-Graeme Gregory <graeme.gregory@linaro.org>
-Hanjun Guo <hanjun.guo@linaro.org>
+- Al Stone <al.stone@linaro.org>
+- Graeme Gregory <graeme.gregory@linaro.org>
+- Hanjun Guo <hanjun.guo@linaro.org>
 
-Grant Likely <grant.likely@linaro.org>, for the "Why ACPI on ARM?" section
+- Grant Likely <grant.likely@linaro.org>, for the "Why ACPI on ARM?" section
diff --git a/Documentation/arm64/booting.txt b/Documentation/arm64/booting.rst
similarity index 86%
rename from Documentation/arm64/booting.txt
rename to Documentation/arm64/booting.rst
index fbab7e21d116..3d041d0d16e8 100644
--- a/Documentation/arm64/booting.txt
+++ b/Documentation/arm64/booting.rst
@@ -1,7 +1,9 @@
-			Booting AArch64 Linux
-			=====================
+=====================
+Booting AArch64 Linux
+=====================
 
 Author: Will Deacon <will.deacon@arm.com>
+
 Date  : 07 September 2012
 
 This document is based on the ARM booting document by Russell King and
@@ -12,7 +14,7 @@ The AArch64 exception model is made up of a number of exception levels
 counterpart.  EL2 is the hypervisor level and exists only in non-secure
 mode. EL3 is the highest priority level and exists only in secure mode.
 
-For the purposes of this document, we will use the term `boot loader'
+For the purposes of this document, we will use the term `boot loader`
 simply to define all software that executes on the CPU(s) before control
 is passed to the Linux kernel.  This may include secure monitor and
 hypervisor code, or it may just be a handful of instructions for
@@ -70,7 +72,7 @@ Image target is available instead.
 
 Requirement: MANDATORY
 
-The decompressed kernel image contains a 64-byte header as follows:
+The decompressed kernel image contains a 64-byte header as follows::
 
   u32 code0;			/* Executable code */
   u32 code1;			/* Executable code */
@@ -103,19 +105,26 @@ Header notes:
 
 - The flags field (introduced in v3.17) is a little-endian 64-bit field
   composed as follows:
-  Bit 0:	Kernel endianness.  1 if BE, 0 if LE.
-  Bit 1-2:	Kernel Page size.
-			0 - Unspecified.
-			1 - 4K
-			2 - 16K
-			3 - 64K
-  Bit 3:	Kernel physical placement
-			0 - 2MB aligned base should be as close as possible
-			    to the base of DRAM, since memory below it is not
-			    accessible via the linear mapping
-			1 - 2MB aligned base may be anywhere in physical
-			    memory
-  Bits 4-63:	Reserved.
+
+  ============= ===============================================================
+  Bit 0		Kernel endianness.  1 if BE, 0 if LE.
+  Bit 1-2	Kernel Page size.
+
+			* 0 - Unspecified.
+			* 1 - 4K
+			* 2 - 16K
+			* 3 - 64K
+  Bit 3		Kernel physical placement
+
+			0
+			  2MB aligned base should be as close as possible
+			  to the base of DRAM, since memory below it is not
+			  accessible via the linear mapping
+			1
+			  2MB aligned base may be anywhere in physical
+			  memory
+  Bits 4-63	Reserved.
+  ============= ===============================================================
 
 - When image_size is zero, a bootloader should attempt to keep as much
   memory as possible free for use by the kernel immediately after the
@@ -147,19 +156,22 @@ Before jumping into the kernel, the following conditions must be met:
   corrupted by bogus network packets or disk data.  This will save
   you many hours of debug.
 
-- Primary CPU general-purpose register settings
-  x0 = physical address of device tree blob (dtb) in system RAM.
-  x1 = 0 (reserved for future use)
-  x2 = 0 (reserved for future use)
-  x3 = 0 (reserved for future use)
+- Primary CPU general-purpose register settings:
+
+    - x0 = physical address of device tree blob (dtb) in system RAM.
+    - x1 = 0 (reserved for future use)
+    - x2 = 0 (reserved for future use)
+    - x3 = 0 (reserved for future use)
 
 - CPU mode
+
   All forms of interrupts must be masked in PSTATE.DAIF (Debug, SError,
   IRQ and FIQ).
   The CPU must be in either EL2 (RECOMMENDED in order to have access to
   the virtualisation extensions) or non-secure EL1.
 
 - Caches, MMUs
+
   The MMU must be off.
   Instruction cache may be on or off.
   The address range corresponding to the loaded kernel image must be
@@ -172,18 +184,21 @@ Before jumping into the kernel, the following conditions must be met:
   operations (not recommended) must be configured and disabled.
 
 - Architected timers
+
   CNTFRQ must be programmed with the timer frequency and CNTVOFF must
   be programmed with a consistent value on all CPUs.  If entering the
   kernel at EL1, CNTHCTL_EL2 must have EL1PCTEN (bit 0) set where
   available.
 
 - Coherency
+
   All CPUs to be booted by the kernel must be part of the same coherency
   domain on entry to the kernel.  This may require IMPLEMENTATION DEFINED
   initialisation to enable the receiving of maintenance operations on
   each CPU.
 
 - System registers
+
   All writable architected system registers at the exception level where
   the kernel image will be entered must be initialised by software at a
   higher exception level to prevent execution in an UNKNOWN state.
@@ -195,28 +210,40 @@ Before jumping into the kernel, the following conditions must be met:
 
   For systems with a GICv3 interrupt controller to be used in v3 mode:
   - If EL3 is present:
-    ICC_SRE_EL3.Enable (bit 3) must be initialiased to 0b1.
-    ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b1.
+
+      - ICC_SRE_EL3.Enable (bit 3) must be initialiased to 0b1.
+      - ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b1.
+
   - If the kernel is entered at EL1:
-    ICC.SRE_EL2.Enable (bit 3) must be initialised to 0b1
-    ICC_SRE_EL2.SRE (bit 0) must be initialised to 0b1.
+
+      - ICC.SRE_EL2.Enable (bit 3) must be initialised to 0b1
+      - ICC_SRE_EL2.SRE (bit 0) must be initialised to 0b1.
+
   - The DT or ACPI tables must describe a GICv3 interrupt controller.
 
   For systems with a GICv3 interrupt controller to be used in
   compatibility (v2) mode:
+
   - If EL3 is present:
-    ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b0.
+
+      ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b0.
+
   - If the kernel is entered at EL1:
-    ICC_SRE_EL2.SRE (bit 0) must be initialised to 0b0.
+
+      ICC_SRE_EL2.SRE (bit 0) must be initialised to 0b0.
+
   - The DT or ACPI tables must describe a GICv2 interrupt controller.
 
   For CPUs with pointer authentication functionality:
   - If EL3 is present:
-    SCR_EL3.APK (bit 16) must be initialised to 0b1
-    SCR_EL3.API (bit 17) must be initialised to 0b1
+
+    - SCR_EL3.APK (bit 16) must be initialised to 0b1
+    - SCR_EL3.API (bit 17) must be initialised to 0b1
+
   - If the kernel is entered at EL1:
-    HCR_EL2.APK (bit 40) must be initialised to 0b1
-    HCR_EL2.API (bit 41) must be initialised to 0b1
+
+    - HCR_EL2.APK (bit 40) must be initialised to 0b1
+    - HCR_EL2.API (bit 41) must be initialised to 0b1
 
 The requirements described above for CPU mode, caches, MMUs, architected
 timers, coherency and system registers apply to all CPUs.  All CPUs must
diff --git a/Documentation/arm64/cpu-feature-registers.txt b/Documentation/arm64/cpu-feature-registers.rst
similarity index 66%
rename from Documentation/arm64/cpu-feature-registers.txt
rename to Documentation/arm64/cpu-feature-registers.rst
index d4b4dd1fe786..251174aaa8ea 100644
--- a/Documentation/arm64/cpu-feature-registers.txt
+++ b/Documentation/arm64/cpu-feature-registers.rst
@@ -1,5 +1,6 @@
-		ARM64 CPU Feature Registers
-		===========================
+===========================
+ARM64 CPU Feature Registers
+===========================
 
 Author: Suzuki K Poulose <suzuki.poulose@arm.com>
 
@@ -9,7 +10,7 @@ registers to userspace. The availability of this ABI is advertised
 via the HWCAP_CPUID in HWCAPs.
 
 1. Motivation
----------------
+-------------
 
 The ARM architecture defines a set of feature registers, which describe
 the capabilities of the CPU/system. Access to these system registers is
@@ -33,9 +34,10 @@ there are some issues with their usage.
 
 
 2. Requirements
------------------
+---------------
+
+ a) Safety:
 
- a) Safety :
     Applications should be able to use the information provided by the
     infrastructure to run safely across the system. This has greater
     implications on a system with heterogeneous CPUs.
@@ -47,7 +49,8 @@ there are some issues with their usage.
     Otherwise an application could crash when scheduled on the CPU
     which doesn't support CRC32.
 
- b) Security :
+ b) Security:
+
     Applications should only be able to receive information that is
     relevant to the normal operation in userspace. Hence, some of the
     fields are masked out(i.e, made invisible) and their values are set to
@@ -58,10 +61,12 @@ there are some issues with their usage.
     (even when the CPU provides it).
 
  c) Implementation Defined Features
+
     The infrastructure doesn't expose any register which is
     IMPLEMENTATION DEFINED as per ARMv8-A Architecture.
 
- d) CPU Identification :
+ d) CPU Identification:
+
     MIDR_EL1 is exposed to help identify the processor. On a
     heterogeneous system, this could be racy (just like getcpu()). The
     process could be migrated to another CPU by the time it uses the
@@ -70,7 +75,7 @@ there are some issues with their usage.
     currently executing on. The REVIDR is not exposed due to this
     constraint, as REVIDR makes sense only in conjunction with the
     MIDR. Alternately, MIDR_EL1 and REVIDR_EL1 are exposed via sysfs
-    at:
+    at::
 
 	/sys/devices/system/cpu/cpu$ID/regs/identification/
 	                                              \- midr
@@ -85,7 +90,8 @@ exception and ends up in SIGILL being delivered to the process.
 The infrastructure hooks into the exception handler and emulates the
 operation if the source belongs to the supported system register space.
 
-The infrastructure emulates only the following system register space:
+The infrastructure emulates only the following system register space::
+
 	Op0=3, Op1=0, CRn=0, CRm=0,4,5,6,7
 
 (See Table C5-6 'System instruction encodings for non-Debug System
@@ -107,73 +113,76 @@ infrastructure:
 -------------------------------------------
 
   1) ID_AA64ISAR0_EL1 - Instruction Set Attribute Register 0
-     x--------------------------------------------------x
+
+     +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | TS                           | [55-52] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | FHM                          | [51-48] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | DP                           | [47-44] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | SM4                          | [43-40] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | SM3                          | [39-36] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | SHA3                         | [35-32] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | RDM                          | [31-28] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | ATOMICS                      | [23-20] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | CRC32                        | [19-16] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | SHA2                         | [15-12] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | SHA1                         | [11-8]  |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | AES                          | [7-4]   |    y    |
-     x--------------------------------------------------x
+     +------------------------------+---------+---------+
 
 
   2) ID_AA64PFR0_EL1 - Processor Feature Register 0
-     x--------------------------------------------------x
+
+     +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | DIT                          | [51-48] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | SVE                          | [35-32] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | GIC                          | [27-24] |    n    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | AdvSIMD                      | [23-20] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | FP                           | [19-16] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | EL3                          | [15-12] |    n    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | EL2                          | [11-8]  |    n    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | EL1                          | [7-4]   |    n    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | EL0                          | [3-0]   |    n    |
-     x--------------------------------------------------x
+     +------------------------------+---------+---------+
 
 
   3) MIDR_EL1 - Main ID Register
-     x--------------------------------------------------x
+
+     +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | Implementer                  | [31-24] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | Variant                      | [23-20] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | Architecture                 | [19-16] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | PartNum                      | [15-4]  |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | Revision                     | [3-0]   |    y    |
-     x--------------------------------------------------x
+     +------------------------------+---------+---------+
 
    NOTE: The 'visible' fields of MIDR_EL1 will contain the value
    as available on the CPU where it is fetched and is not a system
@@ -181,74 +190,76 @@ infrastructure:
 
   4) ID_AA64ISAR1_EL1 - Instruction set attribute register 1
 
-     x--------------------------------------------------x
+     +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | GPI                          | [31-28] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | GPA                          | [27-24] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | LRCPC                        | [23-20] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | FCMA                         | [19-16] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | JSCVT                        | [15-12] |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | API                          | [11-8]  |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | APA                          | [7-4]   |    y    |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | DPB                          | [3-0]   |    y    |
-     x--------------------------------------------------x
+     +------------------------------+---------+---------+
 
   5) ID_AA64MMFR2_EL1 - Memory model feature register 2
 
-     x--------------------------------------------------x
+     +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
-     |--------------------------------------------------|
+     +------------------------------+---------+---------+
      | AT                           | [35-32] |    y    |
-     x--------------------------------------------------x
+     +------------------------------+---------+---------+
 
 Appendix I: Example
----------------------------
+-------------------
 
-/*
- * Sample program to demonstrate the MRS emulation ABI.
- *
- * Copyright (C) 2015-2016, ARM Ltd
- *
- * Author: Suzuki K Poulose <suzuki.poulose@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+::
 
-#include <asm/hwcap.h>
-#include <stdio.h>
-#include <sys/auxv.h>
+  /*
+   * Sample program to demonstrate the MRS emulation ABI.
+   *
+   * Copyright (C) 2015-2016, ARM Ltd
+   *
+   * Author: Suzuki K Poulose <suzuki.poulose@arm.com>
+   *
+   * This program is free software; you can redistribute it and/or modify
+   * it under the terms of the GNU General Public License version 2 as
+   * published by the Free Software Foundation.
+   *
+   * This program is distributed in the hope that it will be useful,
+   * but WITHOUT ANY WARRANTY; without even the implied warranty of
+   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   * GNU General Public License for more details.
+   * This program is free software; you can redistribute it and/or modify
+   * it under the terms of the GNU General Public License version 2 as
+   * published by the Free Software Foundation.
+   *
+   * This program is distributed in the hope that it will be useful,
+   * but WITHOUT ANY WARRANTY; without even the implied warranty of
+   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   * GNU General Public License for more details.
+   */
 
-#define get_cpu_ftr(id) ({					\
+  #include <asm/hwcap.h>
+  #include <stdio.h>
+  #include <sys/auxv.h>
+
+  #define get_cpu_ftr(id) ({					\
 		unsigned long __val;				\
 		asm("mrs %0, "#id : "=r" (__val));		\
 		printf("%-20s: 0x%016lx\n", #id, __val);	\
 	})
 
-int main(void)
-{
+  int main(void)
+  {
 
 	if (!(getauxval(AT_HWCAP) & HWCAP_CPUID)) {
 		fputs("CPUID registers unavailable\n", stderr);
@@ -268,13 +279,10 @@ int main(void)
 	get_cpu_ftr(MPIDR_EL1);
 	get_cpu_ftr(REVIDR_EL1);
 
-#if 0
+  #if 0
 	/* Unexposed register access causes SIGILL */
 	get_cpu_ftr(ID_MMFR0_EL1);
-#endif
+  #endif
 
 	return 0;
-}
-
-
-
+  }
diff --git a/Documentation/arm64/elf_hwcaps.txt b/Documentation/arm64/elf_hwcaps.rst
similarity index 92%
rename from Documentation/arm64/elf_hwcaps.txt
rename to Documentation/arm64/elf_hwcaps.rst
index 55431fd2a67a..d4e06a5564dc 100644
--- a/Documentation/arm64/elf_hwcaps.txt
+++ b/Documentation/arm64/elf_hwcaps.rst
@@ -1,3 +1,4 @@
+================
 ARM64 ELF hwcaps
 ================
 
@@ -15,16 +16,16 @@ of flags called hwcaps, exposed in the auxilliary vector.
 
 Userspace software can test for features by acquiring the AT_HWCAP or
 AT_HWCAP2 entry of the auxiliary vector, and testing whether the relevant
-flags are set, e.g.
+flags are set, e.g.::
 
-bool floating_point_is_present(void)
-{
-	unsigned long hwcaps = getauxval(AT_HWCAP);
-	if (hwcaps & HWCAP_FP)
-		return true;
+	bool floating_point_is_present(void)
+	{
+		unsigned long hwcaps = getauxval(AT_HWCAP);
+		if (hwcaps & HWCAP_FP)
+			return true;
 
-	return false;
-}
+		return false;
+	}
 
 Where software relies on a feature described by a hwcap, it should check
 the relevant hwcap flag to verify that the feature is present before
@@ -45,7 +46,7 @@ userspace code at EL0. These hwcaps are defined in terms of ID register
 fields, and should be interpreted with reference to the definition of
 these fields in the ARM Architecture Reference Manual (ARM ARM).
 
-Such hwcaps are described below in the form:
+Such hwcaps are described below in the form::
 
     Functionality implied by idreg.field == val.
 
@@ -64,75 +65,58 @@ reference to ID registers, and may refer to other documentation.
 ---------------------------------
 
 HWCAP_FP
-
     Functionality implied by ID_AA64PFR0_EL1.FP == 0b0000.
 
 HWCAP_ASIMD
-
     Functionality implied by ID_AA64PFR0_EL1.AdvSIMD == 0b0000.
 
 HWCAP_EVTSTRM
-
     The generic timer is configured to generate events at a frequency of
     approximately 100KHz.
 
 HWCAP_AES
-
     Functionality implied by ID_AA64ISAR0_EL1.AES == 0b0001.
 
 HWCAP_PMULL
-
     Functionality implied by ID_AA64ISAR0_EL1.AES == 0b0010.
 
 HWCAP_SHA1
-
     Functionality implied by ID_AA64ISAR0_EL1.SHA1 == 0b0001.
 
 HWCAP_SHA2
-
     Functionality implied by ID_AA64ISAR0_EL1.SHA2 == 0b0001.
 
 HWCAP_CRC32
-
     Functionality implied by ID_AA64ISAR0_EL1.CRC32 == 0b0001.
 
 HWCAP_ATOMICS
-
     Functionality implied by ID_AA64ISAR0_EL1.Atomic == 0b0010.
 
 HWCAP_FPHP
-
     Functionality implied by ID_AA64PFR0_EL1.FP == 0b0001.
 
 HWCAP_ASIMDHP
-
     Functionality implied by ID_AA64PFR0_EL1.AdvSIMD == 0b0001.
 
 HWCAP_CPUID
-
     EL0 access to certain ID registers is available, to the extent
-    described by Documentation/arm64/cpu-feature-registers.txt.
+    described by Documentation/arm64/cpu-feature-registers.rst.
 
     These ID registers may imply the availability of features.
 
 HWCAP_ASIMDRDM
-
     Functionality implied by ID_AA64ISAR0_EL1.RDM == 0b0001.
 
 HWCAP_JSCVT
-
     Functionality implied by ID_AA64ISAR1_EL1.JSCVT == 0b0001.
 
 HWCAP_FCMA
-
     Functionality implied by ID_AA64ISAR1_EL1.FCMA == 0b0001.
 
 HWCAP_LRCPC
-
     Functionality implied by ID_AA64ISAR1_EL1.LRCPC == 0b0001.
 
 HWCAP_DCPOP
-
     Functionality implied by ID_AA64ISAR1_EL1.DPB == 0b0001.
 
 HWCAP2_DCPODP
@@ -140,64 +124,50 @@ HWCAP2_DCPODP
     Functionality implied by ID_AA64ISAR1_EL1.DPB == 0b0010.
 
 HWCAP_SHA3
-
     Functionality implied by ID_AA64ISAR0_EL1.SHA3 == 0b0001.
 
 HWCAP_SM3
-
     Functionality implied by ID_AA64ISAR0_EL1.SM3 == 0b0001.
 
 HWCAP_SM4
-
     Functionality implied by ID_AA64ISAR0_EL1.SM4 == 0b0001.
 
 HWCAP_ASIMDDP
-
     Functionality implied by ID_AA64ISAR0_EL1.DP == 0b0001.
 
 HWCAP_SHA512
-
     Functionality implied by ID_AA64ISAR0_EL1.SHA2 == 0b0010.
 
 HWCAP_SVE
-
     Functionality implied by ID_AA64PFR0_EL1.SVE == 0b0001.
 
 HWCAP_ASIMDFHM
-
    Functionality implied by ID_AA64ISAR0_EL1.FHM == 0b0001.
 
 HWCAP_DIT
-
     Functionality implied by ID_AA64PFR0_EL1.DIT == 0b0001.
 
 HWCAP_USCAT
-
     Functionality implied by ID_AA64MMFR2_EL1.AT == 0b0001.
 
 HWCAP_ILRCPC
-
     Functionality implied by ID_AA64ISAR1_EL1.LRCPC == 0b0010.
 
 HWCAP_FLAGM
-
     Functionality implied by ID_AA64ISAR0_EL1.TS == 0b0001.
 
 HWCAP_SSBS
-
     Functionality implied by ID_AA64PFR1_EL1.SSBS == 0b0010.
 
 HWCAP_PACA
-
     Functionality implied by ID_AA64ISAR1_EL1.APA == 0b0001 or
     ID_AA64ISAR1_EL1.API == 0b0001, as described by
-    Documentation/arm64/pointer-authentication.txt.
+    Documentation/arm64/pointer-authentication.rst.
 
 HWCAP_PACG
-
     Functionality implied by ID_AA64ISAR1_EL1.GPA == 0b0001 or
     ID_AA64ISAR1_EL1.GPI == 0b0001, as described by
-    Documentation/arm64/pointer-authentication.txt.
+    Documentation/arm64/pointer-authentication.rst.
 
 
 4. Unused AT_HWCAP bits
diff --git a/Documentation/arm64/hugetlbpage.txt b/Documentation/arm64/hugetlbpage.rst
similarity index 86%
rename from Documentation/arm64/hugetlbpage.txt
rename to Documentation/arm64/hugetlbpage.rst
index cfae87dc653b..b44f939e5210 100644
--- a/Documentation/arm64/hugetlbpage.txt
+++ b/Documentation/arm64/hugetlbpage.rst
@@ -1,3 +1,4 @@
+====================
 HugeTLBpage on ARM64
 ====================
 
@@ -31,8 +32,10 @@ and level of the page table.
 
 The following hugepage sizes are supported -
 
-         CONT PTE    PMD    CONT PMD    PUD
-         --------    ---    --------    ---
+  ====== ========   ====    ========    ===
+  -      CONT PTE    PMD    CONT PMD    PUD
+  ====== ========   ====    ========    ===
   4K:         64K     2M         32M     1G
   16K:         2M    32M          1G
   64K:         2M   512M         16G
+  ====== ========   ====    ========    ===
diff --git a/Documentation/arm64/index.rst b/Documentation/arm64/index.rst
new file mode 100644
index 000000000000..018b7836ecb7
--- /dev/null
+++ b/Documentation/arm64/index.rst
@@ -0,0 +1,28 @@
+:orphan:
+
+==================
+ARM64 Architecture
+==================
+
+.. toctree::
+    :maxdepth: 1
+
+    acpi_object_usage
+    arm-acpi
+    booting
+    cpu-feature-registers
+    elf_hwcaps
+    hugetlbpage
+    legacy_instructions
+    memory
+    pointer-authentication
+    silicon-errata
+    sve
+    tagged-pointers
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/arm64/legacy_instructions.txt b/Documentation/arm64/legacy_instructions.rst
similarity index 73%
rename from Documentation/arm64/legacy_instructions.txt
rename to Documentation/arm64/legacy_instructions.rst
index 01bf3d9fac85..54401b22cb8f 100644
--- a/Documentation/arm64/legacy_instructions.txt
+++ b/Documentation/arm64/legacy_instructions.rst
@@ -1,3 +1,7 @@
+===================
+Legacy instructions
+===================
+
 The arm64 port of the Linux kernel provides infrastructure to support
 emulation of instructions which have been deprecated, or obsoleted in
 the architecture. The infrastructure code uses undefined instruction
@@ -9,19 +13,22 @@ The emulation mode can be controlled by writing to sysctl nodes
 behaviours and the corresponding values of the sysctl nodes -
 
 * Undef
-  Value: 0
+    Value: 0
+
   Generates undefined instruction abort. Default for instructions that
   have been obsoleted in the architecture, e.g., SWP
 
 * Emulate
-  Value: 1
+    Value: 1
+
   Uses software emulation. To aid migration of software, in this mode
   usage of emulated instruction is traced as well as rate limited
   warnings are issued. This is the default for deprecated
   instructions, .e.g., CP15 barriers
 
 * Hardware Execution
-  Value: 2
+    Value: 2
+
   Although marked as deprecated, some implementations may support the
   enabling/disabling of hardware support for the execution of these
   instructions. Using hardware execution generally provides better
@@ -38,20 +45,24 @@ individual instruction notes for further information.
 Supported legacy instructions
 -----------------------------
 * SWP{B}
-Node: /proc/sys/abi/swp
-Status: Obsolete
-Default: Undef (0)
+
+:Node: /proc/sys/abi/swp
+:Status: Obsolete
+:Default: Undef (0)
 
 * CP15 Barriers
-Node: /proc/sys/abi/cp15_barrier
-Status: Deprecated
-Default: Emulate (1)
+
+:Node: /proc/sys/abi/cp15_barrier
+:Status: Deprecated
+:Default: Emulate (1)
 
 * SETEND
-Node: /proc/sys/abi/setend
-Status: Deprecated
-Default: Emulate (1)*
-Note: All the cpus on the system must have mixed endian support at EL0
-for this feature to be enabled. If a new CPU - which doesn't support mixed
-endian - is hotplugged in after this feature has been enabled, there could
-be unexpected results in the application.
+
+:Node: /proc/sys/abi/setend
+:Status: Deprecated
+:Default: Emulate (1)*
+
+  Note: All the cpus on the system must have mixed endian support at EL0
+  for this feature to be enabled. If a new CPU - which doesn't support mixed
+  endian - is hotplugged in after this feature has been enabled, there could
+  be unexpected results in the application.
diff --git a/Documentation/arm64/memory.rst b/Documentation/arm64/memory.rst
new file mode 100644
index 000000000000..464b880fc4b7
--- /dev/null
+++ b/Documentation/arm64/memory.rst
@@ -0,0 +1,98 @@
+==============================
+Memory Layout on AArch64 Linux
+==============================
+
+Author: Catalin Marinas <catalin.marinas@arm.com>
+
+This document describes the virtual memory layout used by the AArch64
+Linux kernel. The architecture allows up to 4 levels of translation
+tables with a 4KB page size and up to 3 levels with a 64KB page size.
+
+AArch64 Linux uses either 3 levels or 4 levels of translation tables
+with the 4KB page configuration, allowing 39-bit (512GB) or 48-bit
+(256TB) virtual addresses, respectively, for both user and kernel. With
+64KB pages, only 2 levels of translation tables, allowing 42-bit (4TB)
+virtual address, are used but the memory layout is the same.
+
+User addresses have bits 63:48 set to 0 while the kernel addresses have
+the same bits set to 1. TTBRx selection is given by bit 63 of the
+virtual address. The swapper_pg_dir contains only kernel (global)
+mappings while the user pgd contains only user (non-global) mappings.
+The swapper_pg_dir address is written to TTBR1 and never written to
+TTBR0.
+
+
+AArch64 Linux memory layout with 4KB pages + 3 levels::
+
+  Start			End			Size		Use
+  -----------------------------------------------------------------------
+  0000000000000000	0000007fffffffff	 512GB		user
+  ffffff8000000000	ffffffffffffffff	 512GB		kernel
+
+
+AArch64 Linux memory layout with 4KB pages + 4 levels::
+
+  Start			End			Size		Use
+  -----------------------------------------------------------------------
+  0000000000000000	0000ffffffffffff	 256TB		user
+  ffff000000000000	ffffffffffffffff	 256TB		kernel
+
+
+AArch64 Linux memory layout with 64KB pages + 2 levels::
+
+  Start			End			Size		Use
+  -----------------------------------------------------------------------
+  0000000000000000	000003ffffffffff	   4TB		user
+  fffffc0000000000	ffffffffffffffff	   4TB		kernel
+
+
+AArch64 Linux memory layout with 64KB pages + 3 levels::
+
+  Start			End			Size		Use
+  -----------------------------------------------------------------------
+  0000000000000000	0000ffffffffffff	 256TB		user
+  ffff000000000000	ffffffffffffffff	 256TB		kernel
+
+
+For details of the virtual kernel memory layout please see the kernel
+booting log.
+
+
+Translation table lookup with 4KB pages::
+
+  +--------+--------+--------+--------+--------+--------+--------+--------+
+  |63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
+  +--------+--------+--------+--------+--------+--------+--------+--------+
+   |                 |         |         |         |         |
+   |                 |         |         |         |         v
+   |                 |         |         |         |   [11:0]  in-page offset
+   |                 |         |         |         +-> [20:12] L3 index
+   |                 |         |         +-----------> [29:21] L2 index
+   |                 |         +---------------------> [38:30] L1 index
+   |                 +-------------------------------> [47:39] L0 index
+   +-------------------------------------------------> [63] TTBR0/1
+
+
+Translation table lookup with 64KB pages::
+
+  +--------+--------+--------+--------+--------+--------+--------+--------+
+  |63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
+  +--------+--------+--------+--------+--------+--------+--------+--------+
+   |                 |    |               |              |
+   |                 |    |               |              v
+   |                 |    |               |            [15:0]  in-page offset
+   |                 |    |               +----------> [28:16] L3 index
+   |                 |    +--------------------------> [41:29] L2 index
+   |                 +-------------------------------> [47:42] L1 index
+   +-------------------------------------------------> [63] TTBR0/1
+
+
+When using KVM without the Virtualization Host Extensions, the
+hypervisor maps kernel pages in EL2 at a fixed (and potentially
+random) offset from the linear mapping. See the kern_hyp_va macro and
+kvm_update_va_mask function for more details. MMIO devices such as
+GICv2 gets mapped next to the HYP idmap page, as do vectors when
+ARM64_HARDEN_EL2_VECTORS is selected for particular CPUs.
+
+When using KVM with the Virtualization Host Extensions, no additional
+mappings are created, since the host kernel runs directly in EL2.
diff --git a/Documentation/arm64/memory.txt b/Documentation/arm64/memory.txt
deleted file mode 100644
index c5dab30d3389..000000000000
--- a/Documentation/arm64/memory.txt
+++ /dev/null
@@ -1,97 +0,0 @@
-		     Memory Layout on AArch64 Linux
-		     ==============================
-
-Author: Catalin Marinas <catalin.marinas@arm.com>
-
-This document describes the virtual memory layout used by the AArch64
-Linux kernel. The architecture allows up to 4 levels of translation
-tables with a 4KB page size and up to 3 levels with a 64KB page size.
-
-AArch64 Linux uses either 3 levels or 4 levels of translation tables
-with the 4KB page configuration, allowing 39-bit (512GB) or 48-bit
-(256TB) virtual addresses, respectively, for both user and kernel. With
-64KB pages, only 2 levels of translation tables, allowing 42-bit (4TB)
-virtual address, are used but the memory layout is the same.
-
-User addresses have bits 63:48 set to 0 while the kernel addresses have
-the same bits set to 1. TTBRx selection is given by bit 63 of the
-virtual address. The swapper_pg_dir contains only kernel (global)
-mappings while the user pgd contains only user (non-global) mappings.
-The swapper_pg_dir address is written to TTBR1 and never written to
-TTBR0.
-
-
-AArch64 Linux memory layout with 4KB pages + 3 levels:
-
-Start			End			Size		Use
------------------------------------------------------------------------
-0000000000000000	0000007fffffffff	 512GB		user
-ffffff8000000000	ffffffffffffffff	 512GB		kernel
-
-
-AArch64 Linux memory layout with 4KB pages + 4 levels:
-
-Start			End			Size		Use
------------------------------------------------------------------------
-0000000000000000	0000ffffffffffff	 256TB		user
-ffff000000000000	ffffffffffffffff	 256TB		kernel
-
-
-AArch64 Linux memory layout with 64KB pages + 2 levels:
-
-Start			End			Size		Use
------------------------------------------------------------------------
-0000000000000000	000003ffffffffff	   4TB		user
-fffffc0000000000	ffffffffffffffff	   4TB		kernel
-
-
-AArch64 Linux memory layout with 64KB pages + 3 levels:
-
-Start			End			Size		Use
------------------------------------------------------------------------
-0000000000000000	0000ffffffffffff	 256TB		user
-ffff000000000000	ffffffffffffffff	 256TB		kernel
-
-
-For details of the virtual kernel memory layout please see the kernel
-booting log.
-
-
-Translation table lookup with 4KB pages:
-
-+--------+--------+--------+--------+--------+--------+--------+--------+
-|63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
-+--------+--------+--------+--------+--------+--------+--------+--------+
- |                 |         |         |         |         |
- |                 |         |         |         |         v
- |                 |         |         |         |   [11:0]  in-page offset
- |                 |         |         |         +-> [20:12] L3 index
- |                 |         |         +-----------> [29:21] L2 index
- |                 |         +---------------------> [38:30] L1 index
- |                 +-------------------------------> [47:39] L0 index
- +-------------------------------------------------> [63] TTBR0/1
-
-
-Translation table lookup with 64KB pages:
-
-+--------+--------+--------+--------+--------+--------+--------+--------+
-|63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
-+--------+--------+--------+--------+--------+--------+--------+--------+
- |                 |    |               |              |
- |                 |    |               |              v
- |                 |    |               |            [15:0]  in-page offset
- |                 |    |               +----------> [28:16] L3 index
- |                 |    +--------------------------> [41:29] L2 index
- |                 +-------------------------------> [47:42] L1 index
- +-------------------------------------------------> [63] TTBR0/1
-
-
-When using KVM without the Virtualization Host Extensions, the
-hypervisor maps kernel pages in EL2 at a fixed (and potentially
-random) offset from the linear mapping. See the kern_hyp_va macro and
-kvm_update_va_mask function for more details. MMIO devices such as
-GICv2 gets mapped next to the HYP idmap page, as do vectors when
-ARM64_HARDEN_EL2_VECTORS is selected for particular CPUs.
-
-When using KVM with the Virtualization Host Extensions, no additional
-mappings are created, since the host kernel runs directly in EL2.
diff --git a/Documentation/arm64/pointer-authentication.txt b/Documentation/arm64/pointer-authentication.rst
similarity index 98%
rename from Documentation/arm64/pointer-authentication.txt
rename to Documentation/arm64/pointer-authentication.rst
index 5baca42ba146..f8b9af8b6490 100644
--- a/Documentation/arm64/pointer-authentication.txt
+++ b/Documentation/arm64/pointer-authentication.rst
@@ -1,7 +1,9 @@
+=======================================
 Pointer authentication in AArch64 Linux
 =======================================
 
 Author: Mark Rutland <mark.rutland@arm.com>
+
 Date: 2017-07-19
 
 This document briefly describes the provision of pointer authentication
diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.rst
similarity index 55%
rename from Documentation/arm64/silicon-errata.txt
rename to Documentation/arm64/silicon-errata.rst
index c00efb639e46..926b2ef62cd2 100644
--- a/Documentation/arm64/silicon-errata.txt
+++ b/Documentation/arm64/silicon-errata.rst
@@ -1,7 +1,9 @@
-                Silicon Errata and Software Workarounds
-                =======================================
+=======================================
+Silicon Errata and Software Workarounds
+=======================================
 
 Author: Will Deacon <will.deacon@arm.com>
+
 Date  : 27 November 2015
 
 It is an unfortunate fact of life that hardware is often produced with
@@ -9,11 +11,13 @@ so-called "errata", which can cause it to deviate from the architecture
 under specific circumstances.  For hardware produced by ARM, these
 errata are broadly classified into the following categories:
 
-  Category A: A critical error without a viable workaround.
-  Category B: A significant or critical error with an acceptable
+  ==========  ========================================================
+  Category A  A critical error without a viable workaround.
+  Category B  A significant or critical error with an acceptable
               workaround.
-  Category C: A minor error that is not expected to occur under normal
+  Category C  A minor error that is not expected to occur under normal
               operation.
+  ==========  ========================================================
 
 For more information, consult one of the "Software Developers Errata
 Notice" documents available on infocenter.arm.com (registration
@@ -42,45 +46,82 @@ file acts as a registry of software workarounds in the Linux Kernel and
 will be updated when new workarounds are committed and backported to
 stable kernels.
 
++----------------+-----------------+-----------------+-----------------------------+
 | Implementor    | Component       | Erratum ID      | Kconfig                     |
-+----------------+-----------------+-----------------+-----------------------------+
++================+=================+=================+=============================+
 | Allwinner      | A64/R18         | UNKNOWN1        | SUN50I_ERRATUM_UNKNOWN1     |
-|                |                 |                 |                             |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319        |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #827319         | ARM64_ERRATUM_827319        |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #824069         | ARM64_ERRATUM_824069        |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #819472         | ARM64_ERRATUM_819472        |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #845719         | ARM64_ERRATUM_845719        |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #843419         | ARM64_ERRATUM_843419        |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A57      | #832075         | ARM64_ERRATUM_832075        |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A57      | #852523         | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A57      | #834220         | ARM64_ERRATUM_834220        |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A72      | #853709         | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A73      | #858921         | ARM64_ERRATUM_858921        |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A55      | #1024718        | ARM64_ERRATUM_1024718       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #1188873        | ARM64_ERRATUM_1188873       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #1165522        | ARM64_ERRATUM_1165522       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #1286807        | ARM64_ERRATUM_1286807       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-500         | #841119,#826419 | N/A                         |
-|                |                 |                 |                             |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375        |
++----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX ITS    | #23144          | CAVIUM_ERRATUM_23144        |
++----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX GICv3  | #23154          | CAVIUM_ERRATUM_23154        |
++----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX Core   | #27456          | CAVIUM_ERRATUM_27456        |
++----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX Core   | #30115          | CAVIUM_ERRATUM_30115        |
++----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX SMMUv2 | #27704          | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX2 SMMUv3| #74             | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX2 SMMUv3| #126            | N/A                         |
-|                |                 |                 |                             |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
 | Freescale/NXP  | LS2080A/LS1043A | A-008585        | FSL_ERRATUM_A008585         |
-|                |                 |                 |                             |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip0{5,6,7}     | #161010101      | HISILICON_ERRATUM_161010101 |
++----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip0{6,7}       | #161010701      | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip07           | #161600802      | HISILICON_ERRATUM_161600802 |
++----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip08 SMMU PMCG | #162001800      | N/A                         |
-|                |                 |                 |                             |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo/Falkor v1  | E1003           | QCOM_FALKOR_ERRATUM_1003    |
++----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Falkor v1       | E1009           | QCOM_FALKOR_ERRATUM_1009    |
++----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | QDF2400 ITS     | E0065           | QCOM_QDF2400_ERRATUM_0065   |
++----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Falkor v{1,2}   | E1041           | QCOM_FALKOR_ERRATUM_1041    |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
 | Fujitsu        | A64FX           | E#010001        | FUJITSU_ERRATUM_010001      |
++----------------+-----------------+-----------------+-----------------------------+
diff --git a/Documentation/arm64/sve.txt b/Documentation/arm64/sve.rst
similarity index 98%
rename from Documentation/arm64/sve.txt
rename to Documentation/arm64/sve.rst
index 7169a0ec41d8..2d11877214c6 100644
--- a/Documentation/arm64/sve.txt
+++ b/Documentation/arm64/sve.rst
@@ -1,7 +1,9 @@
-            Scalable Vector Extension support for AArch64 Linux
-            ===================================================
+===================================================
+Scalable Vector Extension support for AArch64 Linux
+===================================================
 
 Author: Dave Martin <Dave.Martin@arm.com>
+
 Date:   4 August 2017
 
 This document outlines briefly the interface provided to userspace by Linux in
@@ -409,7 +411,7 @@ In A64 state, SVE adds the following:
 
 * FPSR and FPCR are retained from ARMv8-A, and interact with SVE floating-point
   operations in a similar way to the way in which they interact with ARMv8
-  floating-point operations.
+  floating-point operations::
 
          8VL-1                       128               0  bit index
         +----          ////            -----------------+
@@ -466,6 +468,8 @@ ARMv8-A defines the following floating-point / SIMD register state:
 * 32 128-bit vector registers V0..V31
 * 2 32-bit status/control registers FPSR, FPCR
 
+::
+
          127           0  bit index
         +---------------+
      V0 |               |
@@ -500,7 +504,7 @@ References
 [2] arch/arm64/include/uapi/asm/ptrace.h
     AArch64 Linux ptrace ABI definitions
 
-[3] Documentation/arm64/cpu-feature-registers.txt
+[3] Documentation/arm64/cpu-feature-registers.rst
 
 [4] ARM IHI0055C
     http://infocenter.arm.com/help/topic/com.arm.doc.ihi0055c/IHI0055C_beta_aapcs64.pdf
diff --git a/Documentation/arm64/tagged-pointers.txt b/Documentation/arm64/tagged-pointers.rst
similarity index 94%
rename from Documentation/arm64/tagged-pointers.txt
rename to Documentation/arm64/tagged-pointers.rst
index a25a99e82bb1..2acdec3ebbeb 100644
--- a/Documentation/arm64/tagged-pointers.txt
+++ b/Documentation/arm64/tagged-pointers.rst
@@ -1,7 +1,9 @@
-		Tagged virtual addresses in AArch64 Linux
-		=========================================
+=========================================
+Tagged virtual addresses in AArch64 Linux
+=========================================
 
 Author: Will Deacon <will.deacon@arm.com>
+
 Date  : 12 June 2013
 
 This document briefly describes the provision of tagged virtual
diff --git a/Documentation/translations/zh_CN/arm64/booting.txt b/Documentation/translations/zh_CN/arm64/booting.txt
index c1dd968c5ee9..3bfbf66e5a5e 100644
--- a/Documentation/translations/zh_CN/arm64/booting.txt
+++ b/Documentation/translations/zh_CN/arm64/booting.txt
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/arm64/booting.txt
+Chinese translated version of Documentation/arm64/booting.rst
 
 If you have any comment or update to the content, please contact the
 original document maintainer directly.  However, if you have a problem
@@ -10,7 +10,7 @@ M:	Will Deacon <will.deacon@arm.com>
 zh_CN:	Fu Wei <wefu@redhat.com>
 C:	55f058e7574c3615dea4615573a19bdb258696c6
 ---------------------------------------------------------------------
-Documentation/arm64/booting.txt 的中文翻译
+Documentation/arm64/booting.rst 的中文翻译
 
 如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文
 交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻
diff --git a/Documentation/translations/zh_CN/arm64/legacy_instructions.txt b/Documentation/translations/zh_CN/arm64/legacy_instructions.txt
index 68362a1ab717..e295cf75f606 100644
--- a/Documentation/translations/zh_CN/arm64/legacy_instructions.txt
+++ b/Documentation/translations/zh_CN/arm64/legacy_instructions.txt
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/arm64/legacy_instructions.txt
+Chinese translated version of Documentation/arm64/legacy_instructions.rst
 
 If you have any comment or update to the content, please contact the
 original document maintainer directly.  However, if you have a problem
@@ -10,7 +10,7 @@ Maintainer: Punit Agrawal <punit.agrawal@arm.com>
             Suzuki K. Poulose <suzuki.poulose@arm.com>
 Chinese maintainer: Fu Wei <wefu@redhat.com>
 ---------------------------------------------------------------------
-Documentation/arm64/legacy_instructions.txt 的中文翻译
+Documentation/arm64/legacy_instructions.rst 的中文翻译
 
 如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文
 交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻
diff --git a/Documentation/translations/zh_CN/arm64/memory.txt b/Documentation/translations/zh_CN/arm64/memory.txt
index 19b3a52d5d94..be20f8228b91 100644
--- a/Documentation/translations/zh_CN/arm64/memory.txt
+++ b/Documentation/translations/zh_CN/arm64/memory.txt
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/arm64/memory.txt
+Chinese translated version of Documentation/arm64/memory.rst
 
 If you have any comment or update to the content, please contact the
 original document maintainer directly.  However, if you have a problem
@@ -9,7 +9,7 @@ or if there is a problem with the translation.
 Maintainer: Catalin Marinas <catalin.marinas@arm.com>
 Chinese maintainer: Fu Wei <wefu@redhat.com>
 ---------------------------------------------------------------------
-Documentation/arm64/memory.txt 的中文翻译
+Documentation/arm64/memory.rst 的中文翻译
 
 如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文
 交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻
diff --git a/Documentation/translations/zh_CN/arm64/silicon-errata.txt b/Documentation/translations/zh_CN/arm64/silicon-errata.txt
index 39477c75c4a4..440c59ac7dce 100644
--- a/Documentation/translations/zh_CN/arm64/silicon-errata.txt
+++ b/Documentation/translations/zh_CN/arm64/silicon-errata.txt
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/arm64/silicon-errata.txt
+Chinese translated version of Documentation/arm64/silicon-errata.rst
 
 If you have any comment or update to the content, please contact the
 original document maintainer directly.  However, if you have a problem
@@ -10,7 +10,7 @@ M:	Will Deacon <will.deacon@arm.com>
 zh_CN:	Fu Wei <wefu@redhat.com>
 C:	1926e54f115725a9248d0c4c65c22acaf94de4c4
 ---------------------------------------------------------------------
-Documentation/arm64/silicon-errata.txt 的中文翻译
+Documentation/arm64/silicon-errata.rst 的中文翻译
 
 如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文
 交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻
diff --git a/Documentation/translations/zh_CN/arm64/tagged-pointers.txt b/Documentation/translations/zh_CN/arm64/tagged-pointers.txt
index 2664d1bd5a1c..77ac3548a16d 100644
--- a/Documentation/translations/zh_CN/arm64/tagged-pointers.txt
+++ b/Documentation/translations/zh_CN/arm64/tagged-pointers.txt
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/arm64/tagged-pointers.txt
+Chinese translated version of Documentation/arm64/tagged-pointers.rst
 
 If you have any comment or update to the content, please contact the
 original document maintainer directly.  However, if you have a problem
@@ -9,7 +9,7 @@ or if there is a problem with the translation.
 Maintainer: Will Deacon <will.deacon@arm.com>
 Chinese maintainer: Fu Wei <wefu@redhat.com>
 ---------------------------------------------------------------------
-Documentation/arm64/tagged-pointers.txt 的中文翻译
+Documentation/arm64/tagged-pointers.rst 的中文翻译
 
 如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文
 交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index e26e470d8566..1abd4919ff4c 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -2216,7 +2216,7 @@ max_vq.  This is the maximum vector length available to the guest on
 this vcpu, and determines which register slices are visible through
 this ioctl interface.
 
-(See Documentation/arm64/sve.txt for an explanation of the "vq"
+(See Documentation/arm64/sve.rst for an explanation of the "vq"
 nomenclature.)
 
 KVM_REG_ARM64_SVE_VLS is only accessible after KVM_ARM_VCPU_INIT.
diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h
index c9e9a6978e73..8e79ce9c3f5c 100644
--- a/arch/arm64/include/asm/efi.h
+++ b/arch/arm64/include/asm/efi.h
@@ -83,7 +83,7 @@ static inline unsigned long efi_get_max_fdt_addr(unsigned long dram_base)
  * guaranteed to cover the kernel Image.
  *
  * Since the EFI stub is part of the kernel Image, we can relax the
- * usual requirements in Documentation/arm64/booting.txt, which still
+ * usual requirements in Documentation/arm64/booting.rst, which still
  * apply to other bootloaders, and are required for some kernel
  * configurations.
  */
diff --git a/arch/arm64/include/asm/image.h b/arch/arm64/include/asm/image.h
index e2c27a2278e9..c2b13213c720 100644
--- a/arch/arm64/include/asm/image.h
+++ b/arch/arm64/include/asm/image.h
@@ -27,7 +27,7 @@
 
 /*
  * struct arm64_image_header - arm64 kernel image header
- * See Documentation/arm64/booting.txt for details
+ * See Documentation/arm64/booting.rst for details
  *
  * @code0:		Executable code, or
  *   @mz_header		  alternatively used for part of MZ header
diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h
index 5f3c0cec5af9..a61f89ddbf34 100644
--- a/arch/arm64/include/uapi/asm/sigcontext.h
+++ b/arch/arm64/include/uapi/asm/sigcontext.h
@@ -137,7 +137,7 @@ struct sve_context {
  * vector length beyond its initial architectural limit of 2048 bits
  * (16 quadwords).
  *
- * See linux/Documentation/arm64/sve.txt for a description of the VL/VQ
+ * See linux/Documentation/arm64/sve.rst for a description of the VL/VQ
  * terminology.
  */
 #define SVE_VQ_BYTES		__SVE_VQ_BYTES	/* bytes per quadword */
diff --git a/arch/arm64/kernel/kexec_image.c b/arch/arm64/kernel/kexec_image.c
index 07bf740bea91..2514fd6f12cb 100644
--- a/arch/arm64/kernel/kexec_image.c
+++ b/arch/arm64/kernel/kexec_image.c
@@ -53,7 +53,7 @@ static void *image_load(struct kimage *image,
 
 	/*
 	 * We require a kernel with an unambiguous Image header. Per
-	 * Documentation/booting.txt, this is the case when image_size
+	 * Documentation/arm64/booting.rst, this is the case when image_size
 	 * is non-zero (practically speaking, since v3.17).
 	 */
 	h = (struct arm64_image_header *)kernel;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 06/79] docs: cdrom-standard.tex: convert from LaTeX to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (4 preceding siblings ...)
  2019-04-22 13:26   ` [PATCH v2 05/79] docs: arm64: convert docs to ReST and rename to .rst Mauro Carvalho Chehab
@ 2019-04-22 13:26   ` Mauro Carvalho Chehab
  2019-04-22 13:26   ` [PATCH v2 07/79] docs: cdrom: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
                     ` (71 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:26 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Jens Axboe

This is the only LaTeX documentation file inside the documentation.

Instead of having a Latex document directly there, convert
it to ReST format, as this is the format we're using for docs.

For now, let's keep the extension as .txt in order to avoid
warnings when building the documentation with Sphinx.

The next patch patch will rename it to .rst and add it to the
building system.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/cdrom/Makefile           |   21 -
 Documentation/cdrom/cdrom-standard.tex | 1026 -----------------------
 Documentation/cdrom/cdrom-standard.txt | 1063 ++++++++++++++++++++++++
 drivers/cdrom/cdrom.c                  |    2 +-
 4 files changed, 1064 insertions(+), 1048 deletions(-)
 delete mode 100644 Documentation/cdrom/Makefile
 delete mode 100644 Documentation/cdrom/cdrom-standard.tex
 create mode 100644 Documentation/cdrom/cdrom-standard.txt

diff --git a/Documentation/cdrom/Makefile b/Documentation/cdrom/Makefile
deleted file mode 100644
index a19e321928e1..000000000000
--- a/Documentation/cdrom/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-LATEXFILE = cdrom-standard
-
-all:
-	make clean
-	latex $(LATEXFILE)
-	latex $(LATEXFILE)
-	@if [ -x `which gv` ]; then \
-		`dvips -q -t letter -o $(LATEXFILE).ps $(LATEXFILE).dvi` ;\
-		`gv -antialias -media letter -nocenter $(LATEXFILE).ps` ;\
-	else \
-		`xdvi $(LATEXFILE).dvi &` ;\
-	fi
-	make sortofclean
-
-clean:
-	rm -f $(LATEXFILE).ps $(LATEXFILE).dvi $(LATEXFILE).aux $(LATEXFILE).log 
-
-sortofclean:
-	rm -f $(LATEXFILE).aux $(LATEXFILE).log 
-
-
diff --git a/Documentation/cdrom/cdrom-standard.tex b/Documentation/cdrom/cdrom-standard.tex
deleted file mode 100644
index f7cd455973f7..000000000000
--- a/Documentation/cdrom/cdrom-standard.tex
+++ /dev/null
@@ -1,1026 +0,0 @@
-\documentclass{article}
-\def\version{$Id: cdrom-standard.tex,v 1.9 1997/12/28 15:42:49 david Exp $}
-\newcommand{\newsection}[1]{\newpage\section{#1}}
-
-\evensidemargin=0pt
-\oddsidemargin=0pt
-\topmargin=-\headheight \advance\topmargin by -\headsep
-\textwidth=15.99cm \textheight=24.62cm % normal A4, 1'' margin
-
-\def\linux{{\sc Linux}}
-\def\cdrom{{\sc cd-rom}}
-\def\UCD{{\sc Uniform cd-rom Driver}}
-\def\cdromc{{\tt {cdrom.c}}}
-\def\cdromh{{\tt {cdrom.h}}}
-\def\fo{\sl}                    % foreign words
-\def\ie{{\fo i.e.}}
-\def\eg{{\fo e.g.}}
-
-\everymath{\it} \everydisplay{\it}
-\catcode `\_=\active \def_{\_\penalty100 }
-\catcode`\<=\active \def<#1>{{\langle\hbox{\rm#1}\rangle}}
-
-\begin{document}
-\title{A \linux\ \cdrom\ standard}
-\author{David van Leeuwen\\{\normalsize\tt david@ElseWare.cistron.nl}
-\\{\footnotesize updated by Erik Andersen {\tt(andersee@debian.org)}}
-\\{\footnotesize updated by Jens Axboe {\tt(axboe@image.dk)}}}
-\date{12 March 1999}
-
-\maketitle
-
-\newsection{Introduction}
-
-\linux\ is probably the Unix-like operating system that supports
-the widest variety of hardware devices. The reasons for this are
-presumably 
-\begin{itemize} 
-\item 
-  The large list of hardware devices available for the many platforms
-  that \linux\ now supports (\ie, i386-PCs, Sparc Suns, etc.)
-\item 
-  The open design of the operating system, such that anybody can write a
-  driver for \linux.
-\item 
-  There is plenty of source code around as examples of how to write a driver.
-\end{itemize}
-The openness of \linux, and the many different types of available
-hardware has allowed \linux\ to support many different hardware devices.
-Unfortunately, the very openness that has allowed \linux\ to support
-all these different devices has also allowed the behavior of each
-device driver to differ significantly from one device to another.
-This divergence of behavior has been very significant for \cdrom\
-devices; the way a particular drive reacts to a `standard' $ioctl()$
-call varies greatly from one device driver to another. To avoid making
-their drivers totally inconsistent, the writers of \linux\ \cdrom\
-drivers generally created new device drivers by understanding, copying,
-and then changing an existing one. Unfortunately, this practice did not
-maintain uniform behavior across all the \linux\ \cdrom\ drivers. 
-
-This document describes an effort to establish Uniform behavior across
-all the different \cdrom\ device drivers for \linux. This document also
-defines the various $ioctl$s, and how the low-level \cdrom\ device
-drivers should implement them. Currently (as of the \linux\ 2.1.$x$
-development kernels) several low-level \cdrom\ device drivers, including
-both IDE/ATAPI and SCSI, now use this Uniform interface.
-
-When the \cdrom\ was developed, the interface between the \cdrom\ drive
-and the computer was not specified in the standards. As a result, many
-different \cdrom\ interfaces were developed. Some of them had their
-own proprietary design (Sony, Mitsumi, Panasonic, Philips), other
-manufacturers adopted an existing electrical interface and changed
-the functionality (CreativeLabs/SoundBlaster, Teac, Funai) or simply
-adapted their drives to one or more of the already existing electrical
-interfaces (Aztech, Sanyo, Funai, Vertos, Longshine, Optics Storage and
-most of the `NoName' manufacturers). In cases where a new drive really
-brought its own interface or used its own command set and flow control
-scheme, either a separate driver had to be written, or an existing
-driver had to be enhanced. History has delivered us \cdrom\ support for
-many of these different interfaces. Nowadays, almost all new \cdrom\
-drives are either IDE/ATAPI or SCSI, and it is very unlikely that any
-manufacturer will create a new interface. Even finding drives for the
-old proprietary interfaces is getting difficult.
-
-When (in the 1.3.70's) I looked at the existing software interface,
-which was expressed through \cdromh, it appeared to be a rather wild
-set of commands and data formats.\footnote{I cannot recollect what
-kernel version I looked at, then, presumably 1.2.13 and 1.3.34---the
-latest kernel that I was indirectly involved in.} It seemed that many
-features of the software interface had been added to accommodate the
-capabilities of a particular drive, in an {\fo ad hoc\/} manner. More
-importantly, it appeared that the behavior of the `standard' commands
-was different for most of the different drivers: \eg, some drivers
-close the tray if an $open()$ call occurs when the tray is open, while
-others do not. Some drivers lock the door upon opening the device, to
-prevent an incoherent file system, but others don't, to allow software
-ejection. Undoubtedly, the capabilities of the different drives vary,
-but even when two drives have the same capability their drivers'
-behavior was usually different.
-
-I decided to start a discussion on how to make all the \linux\ \cdrom\
-drivers behave more uniformly. I began by contacting the developers of
-the many \cdrom\ drivers found in the \linux\ kernel. Their reactions
-encouraged me to write the \UCD\ which this document is intended to
-describe. The implementation of the \UCD\ is in the file \cdromc. This
-driver is intended to be an additional software layer that sits on top
-of the low-level device drivers for each \cdrom\ drive. By adding this
-additional layer, it is possible to have all the different \cdrom\
-devices behave {\em exactly\/} the same (insofar as the underlying
-hardware will allow).
-
-The goal of the \UCD\ is {\em not\/} to alienate driver developers who
-have not yet taken steps to support this effort. The goal of \UCD\ is
-simply to give people writing application programs for \cdrom\ drives
-{\em one\/} \linux\ \cdrom\ interface with consistent behavior for all
-\cdrom\ devices. In addition, this also provides a consistent interface
-between the low-level device driver code and the \linux\ kernel. Care
-is taken that 100\,\% compatibility exists with the data structures and
-programmer's interface defined in \cdromh. This guide was written to
-help \cdrom\ driver developers adapt their code to use the \UCD\ code
-defined in \cdromc.
-
-Personally, I think that the most important hardware interfaces are
-the IDE/ATAPI drives and, of course, the SCSI drives, but as prices
-of hardware drop continuously, it is also likely that people may have
-more than one \cdrom\ drive, possibly of mixed types. It is important
-that these drives behave in the same way. In December 1994, one of the
-cheapest \cdrom\ drives was a Philips cm206, a double-speed proprietary
-drive. In the months that I was busy writing a \linux\ driver for it,
-proprietary drives became obsolete and IDE/ATAPI drives became the
-standard. At the time of the last update to this document (November
-1997) it is becoming difficult to even {\em find} anything less than a
-16 speed \cdrom\ drive, and 24 speed drives are common.
-
-\newsection{Standardizing through another software level}
-\label{cdrom.c}
-
-At the time this document was conceived, all drivers directly
-implemented the \cdrom\ $ioctl()$ calls through their own routines. This
-led to the danger of different drivers forgetting to do important things
-like checking that the user was giving the driver valid data. More
-importantly, this led to the divergence of behavior, which has already
-been discussed.
-
-For this reason, the \UCD\ was created to enforce consistent \cdrom\
-drive behavior, and to provide a common set of services to the various
-low-level \cdrom\ device drivers. The \UCD\ now provides another
-software-level, that separates the $ioctl()$ and $open()$ implementation
-from the actual hardware implementation. Note that this effort has
-made few changes which will affect a user's application programs. The
-greatest change involved moving the contents of the various low-level
-\cdrom\ drivers' header files to the kernel's cdrom directory. This was
-done to help ensure that the user is only presented with only one cdrom
-interface, the interface defined in \cdromh.
-
-\cdrom\ drives are specific enough (\ie, different from other
-block-devices such as floppy or hard disc drives), to define a set
-of common {\em \cdrom\ device operations}, $<cdrom-device>_dops$.
-These operations are different from the classical block-device file
-operations, $<block-device>_fops$.
-
-The routines for the \UCD\ interface level are implemented in the file
-\cdromc. In this file, the \UCD\ interfaces with the kernel as a block
-device by registering the following general $struct\ file_operations$:
-$$
-\halign{$#$\ \hfil&$#$\ \hfil&$/*$ \rm# $*/$\hfil\cr
-struct& file_operations\ cdrom_fops = \{\hidewidth\cr
-        &NULL,                  & lseek \cr
-        &block_read,            & read---general block-dev read \cr
-        &block_write,           & write---general block-dev write \cr
-        &NULL,                  & readdir \cr
-        &NULL,                  & select \cr
-        &cdrom_ioctl,           & ioctl \cr
-        &NULL,                  & mmap \cr
-        &cdrom_open,            & open \cr
-        &cdrom_release,         & release \cr
-        &NULL,                  & fsync \cr
-        &NULL,                  & fasync \cr
-        &cdrom_media_changed,   & media change \cr
-        &NULL                   & revalidate \cr
-\};\cr
-}
-$$ 
-
-Every active \cdrom\ device shares this $struct$. The routines
-declared above are all implemented in \cdromc, since this file is the
-place where the behavior of all \cdrom-devices is defined and
-standardized. The actual interface to the various types of \cdrom\ 
-hardware is still performed by various low-level \cdrom-device
-drivers. These routines simply implement certain {\em capabilities\/}
-that are common to all \cdrom\ (and really, all removable-media
-devices).
-
-Registration of a low-level \cdrom\ device driver is now done through
-the general routines in \cdromc, not through the Virtual File System
-(VFS) any more. The interface implemented in \cdromc\ is carried out
-through two general structures that contain information about the
-capabilities of the driver, and the specific drives on which the
-driver operates. The structures are:
-\begin{description}
-\item[$cdrom_device_ops$] 
-  This structure contains information about the low-level driver for a
-  \cdrom\ device. This structure is conceptually connected to the major
-  number of the device (although some drivers may have different
-  major numbers, as is the case for the IDE driver).
-\item[$cdrom_device_info$] 
-  This structure contains information about a particular \cdrom\ drive,
-  such as its device name, speed, etc. This structure is conceptually
-  connected to the minor number of the device.
-\end{description}
-
-Registering a particular \cdrom\ drive with the \UCD\ is done by the
-low-level device driver though a call to:
-$$register_cdrom(struct\ cdrom_device_info * <device>_info)  
-$$
-The device information structure, $<device>_info$, contains all the
-information needed for the kernel to interface with the low-level
-\cdrom\ device driver. One of the most important entries in this
-structure is a pointer to the $cdrom_device_ops$ structure of the
-low-level driver.
-
-The device operations structure, $cdrom_device_ops$, contains a list
-of pointers to the functions which are implemented in the low-level
-device driver. When \cdromc\ accesses a \cdrom\ device, it does it
-through the functions in this structure. It is impossible to know all
-the capabilities of future \cdrom\ drives, so it is expected that this
-list may need to be expanded from time to time as new technologies are
-developed. For example, CD-R and CD-R/W drives are beginning to become
-popular, and support will soon need to be added for them. For now, the
-current $struct$ is:
-$$
-\halign{$#$\ \hfil&$#$\ \hfil&\hbox to 10em{$#$\hss}&
-  $/*$ \rm# $*/$\hfil\cr
-struct& cdrom_device_ops\ \{ \hidewidth\cr
-  &int& (* open)(struct\ cdrom_device_info *, int)\cr
-  &void& (* release)(struct\ cdrom_device_info *);\cr 
-  &int& (* drive_status)(struct\ cdrom_device_info *, int);\cr     
-  &unsigned\ int& (* check_events)(struct\ cdrom_device_info *, unsigned\ int, int);\cr
-  &int& (* media_changed)(struct\ cdrom_device_info *, int);\cr 
-  &int& (* tray_move)(struct\ cdrom_device_info *, int);\cr
-  &int& (* lock_door)(struct\ cdrom_device_info *, int);\cr
-  &int& (* select_speed)(struct\ cdrom_device_info *, int);\cr
-  &int& (* select_disc)(struct\ cdrom_device_info *, int);\cr
-  &int& (* get_last_session) (struct\ cdrom_device_info *, 
-        struct\ cdrom_multisession *{});\cr
-  &int& (* get_mcn)(struct\ cdrom_device_info *, struct\ cdrom_mcn *{});\cr
-  &int& (* reset)(struct\ cdrom_device_info *);\cr
-  &int& (* audio_ioctl)(struct\ cdrom_device_info *, unsigned\ int, 
-        void *{});\cr 
-\noalign{\medskip}
-  &const\ int& capability;& capability flags \cr
-  &int& (* generic_packet)(struct\ cdrom_device_info *, struct\ packet_command *{});\cr
-\};\cr
-}
-$$
-When a low-level device driver implements one of these capabilities,
-it should add a function pointer to this $struct$. When a particular
-function is not implemented, however, this $struct$ should contain a
-NULL instead. The $capability$ flags specify the capabilities of the
-\cdrom\ hardware and/or low-level \cdrom\ driver when a \cdrom\ drive
-is registered with the \UCD.
-
-Note that most functions have fewer parameters than their
-$blkdev_fops$ counterparts. This is because very little of the
-information in the structures $inode$ and $file$ is used. For most
-drivers, the main parameter is the $struct$ $cdrom_device_info$, from
-which the major and minor number can be extracted. (Most low-level
-\cdrom\ drivers don't even look at the major and minor number though,
-since many of them only support one device.) This will be available
-through $dev$ in $cdrom_device_info$ described below.
-
-The drive-specific, minor-like information that is registered with
-\cdromc, currently contains the following fields:
-$$
-\halign{$#$\ \hfil&$#$\ \hfil&\hbox to 10em{$#$\hss}&
-  $/*$ \rm# $*/$\hfil\cr
-struct& cdrom_device_info\ \{ \hidewidth\cr
-  & const\ struct\ cdrom_device_ops *& ops;& device operations for this major\cr
-  & struct\ list_head& list;& linked list of all device_info\cr
-  & struct\ gendisk *& disk;& matching block layer disk\cr
-  & void *&  handle;& driver-dependent data\cr
-\noalign{\medskip}
-  & int& mask;& mask of capability: disables them \cr
-  & int& speed;& maximum speed for reading data \cr
-  & int& capacity;& number of discs in a jukebox \cr
-\noalign{\medskip}
-  &unsigned\ int& options : 30;& options flags \cr
-  &unsigned& mc_flags : 2;& media-change buffer flags \cr
-  &unsigned\ int& vfs_events;& cached events for vfs path\cr
-  &unsigned\ int& ioctl_events;& cached events for ioctl path\cr
-  & int& use_count;& number of times device is opened\cr
-  & char& name[20];& name of the device type\cr
-\noalign{\medskip}
-  &__u8& sanyo_slot : 2;& Sanyo 3-CD changer support\cr
-  &__u8& keeplocked : 1;& CDROM_LOCKDOOR status\cr
-  &__u8& reserved : 5;& not used yet\cr
-  & int& cdda_method;& see CDDA_* flags\cr
-  &__u8& last_sense;& saves last sense key\cr
-  &__u8& media_written;& dirty flag, DVD+RW bookkeeping\cr
-  &unsigned\ short& mmc3_profile;& current MMC3 profile\cr
-  & int& for_data;& unknown:TBD\cr
-  & int\ (* exit)\ (struct\ cdrom_device_info *);&& unknown:TBD\cr
-  & int& mrw_mode_page;& which MRW mode page is in use\cr
-\}\cr
-}$$
-Using this $struct$, a linked list of the registered minor devices is
-built, using the $next$ field. The device number, the device operations
-struct and specifications of properties of the drive are stored in this
-structure.
-
-The $mask$ flags can be used to mask out some of the capabilities listed
-in $ops\to capability$, if a specific drive doesn't support a feature
-of the driver. The value $speed$ specifies the maximum head-rate of the
-drive, measured in units of normal audio speed (176\,kB/sec raw data or
-150\,kB/sec file system data).  The parameters are declared $const$
-because they describe properties of the drive, which don't change after
-registration.
-
-A few registers contain variables local to the \cdrom\ drive. The
-flags $options$ are used to specify how the general \cdrom\ routines
-should behave. These various flags registers should provide enough
-flexibility to adapt to the different users' wishes (and {\em not\/} the
-`arbitrary' wishes of the author of the low-level device driver, as is
-the case in the old scheme). The register $mc_flags$ is used to buffer
-the information from $media_changed()$ to two separate queues. Other
-data that is specific to a minor drive, can be accessed through $handle$,
-which can point to a data structure specific to the low-level driver.
-The fields $use_count$, $next$, $options$ and $mc_flags$ need not be
-initialized.
-
-The intermediate software layer that \cdromc\ forms will perform some
-additional bookkeeping. The use count of the device (the number of
-processes that have the device opened) is registered in $use_count$. The
-function $cdrom_ioctl()$ will verify the appropriate user-memory regions
-for read and write, and in case a location on the CD is transferred,
-it will `sanitize' the format by making requests to the low-level
-drivers in a standard format, and translating all formats between the
-user-software and low level drivers. This relieves much of the drivers'
-memory checking and format checking and translation. Also, the necessary
-structures will be declared on the program stack.
-
-The implementation of the functions should be as defined in the
-following sections. Two functions {\em must\/} be implemented, namely
-$open()$ and $release()$. Other functions may be omitted, their
-corresponding capability flags will be cleared upon registration.
-Generally, a function returns zero on success and negative on error. A
-function call should return only after the command has completed, but of
-course waiting for the device should not use processor time.
-
-\subsection{$Int\ open(struct\ cdrom_device_info * cdi, int\ purpose)$}
-
-$Open()$ should try to open the device for a specific $purpose$, which
-can be either:
-\begin{itemize}
-\item[0] Open for reading data, as done by {\tt {mount()}} (2), or the
-user commands {\tt {dd}} or {\tt {cat}}.  
-\item[1] Open for $ioctl$ commands, as done by audio-CD playing
-programs.
-\end{itemize}
-Notice that any strategic code (closing tray upon $open()$, etc.)\ is
-done by the calling routine in \cdromc, so the low-level routine
-should only be concerned with proper initialization, such as spinning
-up the disc, etc. % and device-use count
-
-
-\subsection{$Void\ release(struct\ cdrom_device_info * cdi)$}
-
-
-Device-specific actions should be taken such as spinning down the device.
-However, strategic actions such as ejection of the tray, or unlocking
-the door, should be left over to the general routine $cdrom_release()$.
-This is the only function returning type $void$.
-
-\subsection{$Int\ drive_status(struct\ cdrom_device_info * cdi, int\ slot_nr)$}
-\label{drive status}
-
-The function $drive_status$, if implemented, should provide
-information on the status of the drive (not the status of the disc,
-which may or may not be in the drive). If the drive is not a changer,
-$slot_nr$ should be ignored. In \cdromh\ the possibilities are listed: 
-$$
-\halign{$#$\ \hfil&$/*$ \rm# $*/$\hfil\cr
-CDS_NO_INFO& no information available\cr
-CDS_NO_DISC& no disc is inserted, tray is closed\cr
-CDS_TRAY_OPEN& tray is opened\cr
-CDS_DRIVE_NOT_READY& something is wrong, tray is moving?\cr
-CDS_DISC_OK& a disc is loaded and everything is fine\cr
-}
-$$
-
-\subsection{$Int\ media_changed(struct\ cdrom_device_info * cdi, int\ disc_nr)$}
-
-This function is very similar to the original function in $struct\ 
-file_operations$. It returns 1 if the medium of the device $cdi\to
-dev$ has changed since the last call, and 0 otherwise. The parameter
-$disc_nr$ identifies a specific slot in a juke-box, it should be
-ignored for single-disc drives.  Note that by `re-routing' this
-function through $cdrom_media_changed()$, we can implement separate
-queues for the VFS and a new $ioctl()$ function that can report device
-changes to software (\eg, an auto-mounting daemon).
-
-\subsection{$Int\ tray_move(struct\ cdrom_device_info * cdi, int\ position)$}
-
-This function, if implemented, should control the tray movement. (No
-other function should control this.) The parameter $position$ controls
-the desired direction of movement:
-\begin{itemize}
-\item[0] Close tray
-\item[1] Open tray
-\end{itemize}
-This function returns 0 upon success, and a non-zero value upon
-error. Note that if the tray is already in the desired position, no
-action need be taken, and the return value should be 0. 
-
-\subsection{$Int\ lock_door(struct\ cdrom_device_info * cdi, int\ lock)$}
-
-This function (and no other code) controls locking of the door, if the
-drive allows this. The value of $lock$ controls the desired locking
-state:
-\begin{itemize}
-\item[0] Unlock door, manual opening is allowed
-\item[1] Lock door, tray cannot be ejected manually
-\end{itemize}
-This function returns 0 upon success, and a non-zero value upon
-error. Note that if the door is already in the requested state, no
-action need be taken, and the return value should be 0. 
-
-\subsection{$Int\ select_speed(struct\ cdrom_device_info * cdi, int\ speed)$}
-
-Some \cdrom\ drives are capable of changing their head-speed. There
-are several reasons for changing the speed of a \cdrom\ drive. Badly
-pressed \cdrom s may benefit from less-than-maximum head rate. Modern
-\cdrom\ drives can obtain very high head rates (up to $24\times$ is
-common).  It has been reported that these drives can make reading
-errors at these high speeds, reducing the speed can prevent data loss
-in these circumstances.  Finally, some of these drives can
-make an annoyingly loud noise, which a lower speed may reduce. %Finally,
-%although the audio-low-pass filters probably aren't designed for it,
-%more than real-time playback of audio might be used for high-speed
-%copying of audio tracks.
-
-This function specifies the speed at which data is read or audio is
-played back. The value of $speed$ specifies the head-speed of the
-drive, measured in units of standard cdrom speed (176\,kB/sec raw data
-or 150\,kB/sec file system data). So to request that a \cdrom\ drive
-operate at 300\,kB/sec you would call the CDROM_SELECT_SPEED $ioctl$
-with $speed=2$. The special value `0' means `auto-selection', \ie,
-maximum data-rate or real-time audio rate. If the drive doesn't have
-this `auto-selection' capability, the decision should be made on the
-current disc loaded and the return value should be positive. A negative
-return value indicates an error.
-
-\subsection{$Int\ select_disc(struct\ cdrom_device_info * cdi, int\ number)$}
-
-If the drive can store multiple discs (a juke-box) this function
-will perform disc selection. It should return the number of the
-selected disc on success, a negative value on error. Currently, only
-the ide-cd driver supports this functionality.
-
-\subsection{$Int\ get_last_session(struct\ cdrom_device_info * cdi, struct\
-  cdrom_multisession * ms_info)$}
-
-This function should implement the old corresponding $ioctl()$. For
-device $cdi\to dev$, the start of the last session of the current disc
-should be returned in the pointer argument $ms_info$. Note that
-routines in \cdromc\ have sanitized this argument: its requested
-format will {\em always\/} be of the type $CDROM_LBA$ (linear block
-addressing mode), whatever the calling software requested. But
-sanitization goes even further: the low-level implementation may
-return the requested information in $CDROM_MSF$ format if it wishes so
-(setting the $ms_info\rightarrow addr_format$ field appropriately, of
-course) and the routines in \cdromc\ will make the transformation if
-necessary. The return value is 0 upon success.
-
-\subsection{$Int\ get_mcn(struct\ cdrom_device_info * cdi, struct\
-  cdrom_mcn * mcn)$}
-
-Some discs carry a `Media Catalog Number' (MCN), also called
-`Universal Product Code' (UPC). This number should reflect the number
-that is generally found in the bar-code on the product. Unfortunately,
-the few discs that carry such a number on the disc don't even use the
-same format. The return argument to this function is a pointer to a
-pre-declared memory region of type $struct\ cdrom_mcn$. The MCN is
-expected as a 13-character string, terminated by a null-character.
-
-\subsection{$Int\ reset(struct\ cdrom_device_info * cdi)$}
-
-This call should perform a hard-reset on the drive (although in
-circumstances that a hard-reset is necessary, a drive may very well not
-listen to commands anymore). Preferably, control is returned to the
-caller only after the drive has finished resetting. If the drive is no
-longer listening, it may be wise for the underlying low-level cdrom
-driver to time out.
-
-\subsection{$Int\ audio_ioctl(struct\ cdrom_device_info * cdi, unsigned\
-  int\ cmd, void * arg)$}
-
-Some of the \cdrom-$ioctl$s defined in \cdromh\ can be
-implemented by the routines described above, and hence the function
-$cdrom_ioctl$ will use those. However, most $ioctl$s deal with
-audio-control. We have decided to leave these to be accessed through a
-single function, repeating the arguments $cmd$ and $arg$. Note that
-the latter is of type $void*{}$, rather than $unsigned\ long\
-int$. The routine $cdrom_ioctl()$ does do some useful things,
-though. It sanitizes the address format type to $CDROM_MSF$ (Minutes,
-Seconds, Frames) for all audio calls. It also verifies the memory
-location of $arg$, and reserves stack-memory for the argument. This
-makes implementation of the $audio_ioctl()$ much simpler than in the
-old driver scheme. For example, you may look up the function
-$cm206_audio_ioctl()$ in {\tt {cm206.c}} that should be updated with
-this documentation. 
-
-An unimplemented ioctl should return $-ENOSYS$, but a harmless request
-(\eg, $CDROMSTART$) may be ignored by returning 0 (success). Other
-errors should be according to the standards, whatever they are. When
-an error is returned by the low-level driver, the \UCD\ tries whenever
-possible to return the error code to the calling program. (We may decide
-to sanitize the return value in $cdrom_ioctl()$ though, in order to
-guarantee a uniform interface to the audio-player software.)
-
-\subsection{$Int\ dev_ioctl(struct\ cdrom_device_info * cdi, unsigned\ int\
-  cmd, unsigned\ long\ arg)$}
-
-Some $ioctl$s seem to be specific to certain \cdrom\ drives. That is,
-they are introduced to service some capabilities of certain drives. In
-fact, there are 6 different $ioctl$s for reading data, either in some
-particular kind of format, or audio data. Not many drives support
-reading audio tracks as data, I believe this is because of protection
-of copyrights of artists. Moreover, I think that if audio-tracks are
-supported, it should be done through the VFS and not via $ioctl$s. A
-problem here could be the fact that audio-frames are 2352 bytes long,
-so either the audio-file-system should ask for 75264 bytes at once
-(the least common multiple of 512 and 2352), or the drivers should
-bend their backs to cope with this incoherence (to which I would be
-opposed).  Furthermore, it is very difficult for the hardware to find
-the exact frame boundaries, since there are no synchronization headers
-in audio frames.  Once these issues are resolved, this code should be
-standardized in \cdromc.
-
-Because there are so many $ioctl$s that seem to be introduced to
-satisfy certain drivers,\footnote{Is there software around that
-  actually uses these? I'd be interested!} any `non-standard' $ioctl$s
-are routed through the call $dev_ioctl()$. In principle, `private'
-$ioctl$s should be numbered after the device's major number, and not
-the general \cdrom\ $ioctl$ number, {\tt {0x53}}. Currently the
-non-supported $ioctl$s are: {\it CDROMREADMODE1, CDROMREADMODE2,
-  CDROMREADAUDIO, CDROMREADRAW, CDROMREADCOOKED, CDROMSEEK,
-  CDROMPLAY\-BLK and CDROM\-READALL}.
-
-
-\subsection{\cdrom\ capabilities}
-\label{capability}
-
-Instead of just implementing some $ioctl$ calls, the interface in
-\cdromc\ supplies the possibility to indicate the {\em capabilities\/}
-of a \cdrom\ drive. This can be done by ORing any number of
-capability-constants that are defined in \cdromh\ at the registration
-phase. Currently, the capabilities are any of:
-$$
-\halign{$#$\ \hfil&$/*$ \rm# $*/$\hfil\cr
-CDC_CLOSE_TRAY& can close tray by software control\cr
-CDC_OPEN_TRAY& can open tray\cr
-CDC_LOCK& can lock and unlock the door\cr
-CDC_SELECT_SPEED& can select speed, in units of $\sim$150\,kB/s\cr
-CDC_SELECT_DISC& drive is juke-box\cr
-CDC_MULTI_SESSION& can read sessions $>\rm1$\cr
-CDC_MCN& can read Media Catalog Number\cr
-CDC_MEDIA_CHANGED& can report if disc has changed\cr
-CDC_PLAY_AUDIO& can perform audio-functions (play, pause, etc)\cr
-CDC_RESET& hard reset device\cr
-CDC_IOCTLS& driver has non-standard ioctls\cr
-CDC_DRIVE_STATUS& driver implements drive status\cr
-}
-$$
-The capability flag is declared $const$, to prevent drivers from
-accidentally tampering with the contents. The capability fags actually
-inform \cdromc\ of what the driver can do. If the drive found
-by the driver does not have the capability, is can be masked out by
-the $cdrom_device_info$ variable $mask$. For instance, the SCSI \cdrom\
-driver has implemented the code for loading and ejecting \cdrom's, and
-hence its corresponding flags in $capability$ will be set. But a SCSI
-\cdrom\ drive might be a caddy system, which can't load the tray, and
-hence for this drive the $cdrom_device_info$ struct will have set
-the $CDC_CLOSE_TRAY$ bit in $mask$.
-
-In the file \cdromc\ you will encounter many constructions of the type
-$$\it
-if\ (cdo\rightarrow capability \mathrel\& \mathord{\sim} cdi\rightarrow mask 
-   \mathrel{\&} CDC_<capability>) \ldots
-$$
-There is no $ioctl$ to set the mask\dots The reason is that
-I think it is better to control the {\em behavior\/} rather than the
-{\em capabilities}.
-
-\subsection{Options}
-
-A final flag register controls the {\em behavior\/} of the \cdrom\
-drives, in order to satisfy different users' wishes, hopefully
-independently of the ideas of the respective author who happened to
-have made the drive's support available to the \linux\ community. The
-current behavior options are:
-$$
-\halign{$#$\ \hfil&$/*$ \rm# $*/$\hfil\cr
-CDO_AUTO_CLOSE& try to close tray upon device $open()$\cr
-CDO_AUTO_EJECT& try to open tray on last device $close()$\cr
-CDO_USE_FFLAGS& use $file_pointer\rightarrow f_flags$ to indicate
- purpose for $open()$\cr
-CDO_LOCK& try to lock door if device is opened\cr
-CDO_CHECK_TYPE& ensure disc type is data if opened for data\cr
-}
-$$
-
-The initial value of this register is $CDO_AUTO_CLOSE \mathrel|
-CDO_USE_FFLAGS \mathrel| CDO_LOCK$, reflecting my own view on user
-interface and software standards. Before you protest, there are two
-new $ioctl$s implemented in \cdromc, that allow you to control the
-behavior by software. These are:
-$$
-\halign{$#$\ \hfil&$/*$ \rm# $*/$\hfil\cr
-CDROM_SET_OPTIONS& set options specified in $(int)\ arg$\cr
-CDROM_CLEAR_OPTIONS& clear options specified in $(int)\ arg$\cr
-}
-$$
-One option needs some more explanation: $CDO_USE_FFLAGS$. In the next
-newsection we explain what the need for this option is.
-
-A software package {\tt setcd}, available from the Debian distribution
-and {\tt sunsite.unc.edu}, allows user level control of these flags. 
-
-\newsection{The need to know the purpose of opening the \cdrom\ device}
-
-Traditionally, Unix devices can be used in two different `modes',
-either by reading/writing to the device file, or by issuing
-controlling commands to the device, by the device's $ioctl()$
-call. The problem with \cdrom\ drives, is that they can be used for
-two entirely different purposes. One is to mount removable
-file systems, \cdrom s, the other is to play audio CD's. Audio commands
-are implemented entirely through $ioctl$s, presumably because the
-first implementation (SUN?) has been such. In principle there is
-nothing wrong with this, but a good control of the `CD player' demands
-that the device can {\em always\/} be opened in order to give the
-$ioctl$ commands, regardless of the state the drive is in. 
-
-On the other hand, when used as a removable-media disc drive (what the
-original purpose of \cdrom s is) we would like to make sure that the
-disc drive is ready for operation upon opening the device. In the old
-scheme, some \cdrom\ drivers don't do any integrity checking, resulting
-in a number of i/o errors reported by the VFS to the kernel when an
-attempt for mounting a \cdrom\ on an empty drive occurs. This is not a
-particularly elegant way to find out that there is no \cdrom\ inserted;
-it more-or-less looks like the old IBM-PC trying to read an empty floppy
-drive for a couple of seconds, after which the system complains it
-can't read from it. Nowadays we can {\em sense\/} the existence of a
-removable medium in a drive, and we believe we should exploit that
-fact. An integrity check on opening of the device, that verifies the
-availability of a \cdrom\ and its correct type (data), would be
-desirable.
-
-These two ways of using a \cdrom\ drive, principally for data and
-secondarily for playing audio discs, have different demands for the
-behavior of the $open()$ call. Audio use simply wants to open the
-device in order to get a file handle which is needed for issuing
-$ioctl$ commands, while data use wants to open for correct and
-reliable data transfer. The only way user programs can indicate what
-their {\em purpose\/} of opening the device is, is through the $flags$
-parameter (see {\tt {open(2)}}). For \cdrom\ devices, these flags aren't
-implemented (some drivers implement checking for write-related flags,
-but this is not strictly necessary if the device file has correct
-permission flags). Most option flags simply don't make sense to
-\cdrom\ devices: $O_CREAT$, $O_NOCTTY$, $O_TRUNC$, $O_APPEND$, and
-$O_SYNC$ have no meaning to a \cdrom. 
-
-We therefore propose to use the flag $O_NONBLOCK$ to indicate
-that the device is opened just for issuing $ioctl$
-commands. Strictly, the meaning of $O_NONBLOCK$ is that opening and
-subsequent calls to the device don't cause the calling process to
-wait. We could interpret this as ``don't wait until someone has
-inserted some valid data-\cdrom.'' Thus, our proposal of the
-implementation for the $open()$ call for \cdrom s is:
-\begin{itemize}
-\item If no other flags are set than $O_RDONLY$, the device is opened
-for data transfer, and the return value will be 0 only upon successful
-initialization of the transfer. The call may even induce some actions
-on the \cdrom, such as closing the tray.  
-\item If the option flag $O_NONBLOCK$ is set, opening will always be
-successful, unless the whole device doesn't exist. The drive will take
-no actions whatsoever. 
-\end{itemize}
-
-\subsection{And what about standards?}
-
-You might hesitate to accept this proposal as it comes from the
-\linux\ community, and not from some standardizing institute. What
-about SUN, SGI, HP and all those other Unix and hardware vendors?
-Well, these companies are in the lucky position that they generally
-control both the hardware and software of their supported products,
-and are large enough to set their own standard. They do not have to
-deal with a dozen or more different, competing hardware
-configurations.\footnote{Incidentally, I think that SUN's approach to
-mounting \cdrom s is very good in origin: under Solaris a
-volume-daemon automatically mounts a newly inserted \cdrom\ under {\tt
-{/cdrom/$<volume-name>$/}}. In my opinion they should have pushed this
-further and have {\em every\/} \cdrom\ on the local area network be
-mounted at the similar location, \ie, no matter in which particular
-machine you insert a \cdrom, it will always appear at the same
-position in the directory tree, on every system. When I wanted to
-implement such a user-program for \linux, I came across the
-differences in behavior of the various drivers, and the need for an
-$ioctl$ informing about media changes.}
-
-We believe that using $O_NONBLOCK$ to indicate that a device is being opened
-for $ioctl$ commands only can be easily introduced in the \linux\
-community. All the CD-player authors will have to be informed, we can
-even send in our own patches to the programs. The use of $O_NONBLOCK$
-has most likely no influence on the behavior of the CD-players on
-other operating systems than \linux. Finally, a user can always revert
-to old behavior by a call to $ioctl(file_descriptor, CDROM_CLEAR_OPTIONS,
-CDO_USE_FFLAGS)$. 
-
-\subsection{The preferred strategy of $open()$}
-
-The routines in \cdromc\ are designed in such a way that run-time
-configuration of the behavior of \cdrom\ devices (of {\em any\/} type)
-can be carried out, by the $CDROM_SET/CLEAR_OPTIONS$ $ioctls$. Thus, various
-modes of operation can be set:
-\begin{description}
-\item[$CDO_AUTO_CLOSE \mathrel| CDO_USE_FFLAGS \mathrel| CDO_LOCK$] This
-is the default setting. (With $CDO_CHECK_TYPE$ it will be better, in the
-future.) If the device is not yet opened by any other process, and if
-the device is being opened for data ($O_NONBLOCK$ is not set) and the
-tray is found to be open, an attempt to close the tray is made. Then,
-it is verified that a disc is in the drive and, if $CDO_CHECK_TYPE$ is
-set, that it contains tracks of type `data mode 1.' Only if all tests
-are passed is the return value zero. The door is locked to prevent file
-system corruption. If the drive is opened for audio ($O_NONBLOCK$ is
-set), no actions are taken and a value of 0 will be returned. 
-\item[$CDO_AUTO_CLOSE \mathrel| CDO_AUTO_EJECT \mathrel| CDO_LOCK$] This
-mimics the behavior of the current sbpcd-driver. The option flags are
-ignored, the tray is closed on the first open, if necessary. Similarly,
-the tray is opened on the last release, \ie, if a \cdrom\ is unmounted,
-it is automatically ejected, such that the user can replace it.
-\end{description} 
-We hope that these option can convince everybody (both driver
-maintainers and user program developers) to adopt the new \cdrom\
-driver scheme and option flag interpretation.
-
-\newsection{Description of routines in \cdromc}
-
-Only a few routines in \cdromc\ are exported to the drivers. In this
-new section we will discuss these, as well as the functions that `take
-over' the \cdrom\ interface to the kernel. The header file belonging
-to \cdromc\ is called \cdromh. Formerly, some of the contents of this
-file were placed in the file {\tt {ucdrom.h}}, but this file has now been
-merged back into \cdromh.
-
-\subsection{$Struct\ file_operations\ cdrom_fops$}
-
-The contents of this structure were described in section~\ref{cdrom.c}.
-A pointer to this structure is assigned to the $fops$ field
-of the $struct gendisk$.
-
-\subsection{$Int\ register_cdrom( struct\ cdrom_device_info\ * cdi)$}
-
-This function is used in about the same way one registers $cdrom_fops$
-with the kernel, the device operations and information structures,
-as described in section~\ref{cdrom.c}, should be registered with the
-\UCD:
-$$
-register_cdrom(\&<device>_info));
-$$
-This function returns zero upon success, and non-zero upon
-failure. The structure $<device>_info$ should have a pointer to the
-driver's $<device>_dops$, as in 
-$$
-\vbox{\halign{&$#$\hfil\cr
-struct\ &cdrom_device_info\ <device>_info = \{\cr
-& <device>_dops;\cr
-&\ldots\cr
-\}\cr
-}}$$
-Note that a driver must have one static structure, $<device>_dops$, while
-it may have as many structures $<device>_info$ as there are minor devices
-active. $Register_cdrom()$ builds a linked list from these. 
-
-\subsection{$Void\ unregister_cdrom(struct\ cdrom_device_info * cdi)$}
-
-Unregistering device $cdi$ with minor number $MINOR(cdi\to dev)$ removes
-the minor device from the list. If it was the last registered minor for
-the low-level driver, this disconnects the registered device-operation
-routines from the \cdrom\ interface. This function returns zero upon
-success, and non-zero upon failure.
-
-\subsection{$Int\ cdrom_open(struct\ inode * ip, struct\ file * fp)$}
-
-This function is not called directly by the low-level drivers, it is
-listed in the standard $cdrom_fops$. If the VFS opens a file, this
-function becomes active. A strategy is implemented in this routine,
-taking care of all capabilities and options that are set in the
-$cdrom_device_ops$ connected to the device. Then, the program flow is
-transferred to the device_dependent $open()$ call.
-
-\subsection{$Void\ cdrom_release(struct\ inode *ip, struct\ file
-*fp)$}
-
-This function implements the reverse-logic of $cdrom_open()$, and then
-calls the device-dependent $release()$ routine. When the use-count has
-reached 0, the allocated buffers are flushed by calls to $sync_dev(dev)$
-and $invalidate_buffers(dev)$.
-
-
-\subsection{$Int\ cdrom_ioctl(struct\ inode *ip, struct\ file *fp,
-unsigned\ int\ cmd, unsigned\ long\ arg)$}
-\label{cdrom-ioctl}
-
-This function handles all the standard $ioctl$ requests for \cdrom\
-devices in a uniform way. The different calls fall into three
-categories: $ioctl$s that can be directly implemented by device
-operations, ones that are routed through the call $audio_ioctl()$, and
-the remaining ones, that are presumable device-dependent. Generally, a
-negative return value indicates an error.
-
-\subsubsection{Directly implemented $ioctl$s}
-\label{ioctl-direct}
-
-The following `old' \cdrom-$ioctl$s are implemented by directly
-calling device-operations in $cdrom_device_ops$, if implemented and
-not masked:
-\begin{description}
-\item[CDROMMULTISESSION] Requests the last session on a \cdrom.
-\item[CDROMEJECT] Open tray. 
-\item[CDROMCLOSETRAY] Close tray.
-\item[CDROMEJECT_SW] If $arg\not=0$, set behavior to auto-close (close
-tray on first open) and auto-eject (eject on last release), otherwise
-set behavior to non-moving on $open()$ and $release()$ calls.
-\item[CDROM_GET_MCN] Get the Media Catalog Number from a CD.
-\end{description}
-
-\subsubsection{$Ioctl$s routed through $audio_ioctl()$}
-\label{ioctl-audio}
-
-The following set of $ioctl$s are all implemented through a call to
-the $cdrom_fops$ function $audio_ioctl()$. Memory checks and
-allocation are performed in $cdrom_ioctl()$, and also sanitization of
-address format ($CDROM_LBA$/$CDROM_MSF$) is done.
-\begin{description}
-\item[CDROMSUBCHNL] Get sub-channel data in argument $arg$ of type $struct\
-cdrom_subchnl *{}$.
-\item[CDROMREADTOCHDR] Read Table of Contents header, in $arg$ of type
-$struct\ cdrom_tochdr *{}$. 
-\item[CDROMREADTOCENTRY] Read a Table of Contents entry in $arg$ and
-specified by $arg$ of type $struct\ cdrom_tocentry *{}$.
-\item[CDROMPLAYMSF] Play audio fragment specified in Minute, Second,
-Frame format, delimited by $arg$ of type $struct\ cdrom_msf *{}$.
-\item[CDROMPLAYTRKIND] Play audio fragment in track-index format
-delimited by $arg$ of type $struct\ \penalty-1000 cdrom_ti *{}$.
-\item[CDROMVOLCTRL] Set volume specified by $arg$ of type $struct\
-cdrom_volctrl *{}$.
-\item[CDROMVOLREAD] Read volume into by $arg$ of type $struct\
-cdrom_volctrl *{}$.
-\item[CDROMSTART] Spin up disc.
-\item[CDROMSTOP] Stop playback of audio fragment.
-\item[CDROMPAUSE] Pause playback of audio fragment.
-\item[CDROMRESUME] Resume playing.
-\end{description}
-
-\subsubsection{New $ioctl$s in \cdromc}
-
-The following $ioctl$s have been introduced to allow user programs to
-control the behavior of individual \cdrom\ devices. New $ioctl$
-commands can be identified by the underscores in their names.
-\begin{description}
-\item[CDROM_SET_OPTIONS] Set options specified by $arg$. Returns the
-option flag register after modification. Use  $arg = \rm0$ for reading
-the current flags.
-\item[CDROM_CLEAR_OPTIONS] Clear options specified by $arg$. Returns
-  the option flag register after modification.
-\item[CDROM_SELECT_SPEED] Select head-rate speed of disc specified as
-  by $arg$ in units of standard cdrom speed (176\,kB/sec raw data or
-  150\,kB/sec file system data). The value 0 means `auto-select', \ie,
-  play audio discs at real time and data discs at maximum speed. The value
-  $arg$ is checked against the maximum head rate of the drive found in the
-  $cdrom_dops$.
-\item[CDROM_SELECT_DISC] Select disc numbered $arg$ from a juke-box.
-  First disc is numbered 0. The number $arg$ is checked against the
-  maximum number of discs in the juke-box found in the $cdrom_dops$.
-\item[CDROM_MEDIA_CHANGED] Returns 1 if a disc has been changed since
-  the last call. Note that calls to $cdrom_media_changed$ by the VFS
-  are treated by an independent queue, so both mechanisms will detect
-  a media change once. For juke-boxes, an extra argument $arg$
-  specifies the slot for which the information is given. The special
-  value $CDSL_CURRENT$ requests that information about the currently
-  selected slot be returned.
-\item[CDROM_DRIVE_STATUS] Returns the status of the drive by a call to
-  $drive_status()$. Return values are defined in section~\ref{drive
-   status}. Note that this call doesn't return information on the
-  current playing activity of the drive; this can be polled through an
-  $ioctl$ call to $CDROMSUBCHNL$. For juke-boxes, an extra argument
-  $arg$ specifies the slot for which (possibly limited) information is
-  given. The special value $CDSL_CURRENT$ requests that information
-  about the currently selected slot be returned.
-\item[CDROM_DISC_STATUS] Returns the type of the disc currently in the
-  drive.  It should be viewed as a complement to $CDROM_DRIVE_STATUS$.
-  This $ioctl$ can provide \emph {some} information about the current
-  disc that is inserted in the drive.  This functionality used to be
-  implemented in the low level drivers, but is now carried out
-  entirely in \UCD.
-  
-  The history of development of the CD's use as a carrier medium for
-  various digital information has lead to many different disc types.
-  This $ioctl$ is useful only in the case that CDs have \emph {only
-    one} type of data on them.  While this is often the case, it is
-  also very common for CDs to have some tracks with data, and some
-  tracks with audio.  Because this is an existing interface, rather
-  than fixing this interface by changing the assumptions it was made
-  under, thereby breaking all user applications that use this
-  function, the \UCD\ implements this $ioctl$ as follows: If the CD in
-  question has audio tracks on it, and it has absolutely no CD-I, XA,
-  or data tracks on it, it will be reported as $CDS_AUDIO$.  If it has
-  both audio and data tracks, it will return $CDS_MIXED$.  If there
-  are no audio tracks on the disc, and if the CD in question has any
-  CD-I tracks on it, it will be reported as $CDS_XA_2_2$.  Failing
-  that, if the CD in question has any XA tracks on it, it will be
-  reported as $CDS_XA_2_1$.  Finally, if the CD in question has any
-  data tracks on it, it will be reported as a data CD ($CDS_DATA_1$).
-
-  This $ioctl$ can return:
-  $$
-  \halign{$#$\ \hfil&$/*$ \rm# $*/$\hfil\cr
-    CDS_NO_INFO& no information available\cr
-    CDS_NO_DISC& no disc is inserted, or tray is opened\cr
-    CDS_AUDIO& Audio disc (2352 audio bytes/frame)\cr
-    CDS_DATA_1& data disc, mode 1 (2048 user bytes/frame)\cr
-    CDS_XA_2_1& mixed data (XA), mode 2, form 1 (2048 user bytes)\cr
-    CDS_XA_2_2& mixed data (XA), mode 2, form 1 (2324  user bytes)\cr
-    CDS_MIXED& mixed audio/data disc\cr
-    }
-  $$
-  For some information concerning frame layout of the various disc
-  types, see a recent version of \cdromh.
-
-\item[CDROM_CHANGER_NSLOTS] Returns the number of slots in a
-  juke-box. 
-\item[CDROMRESET] Reset the drive. 
-\item[CDROM_GET_CAPABILITY] Returns the $capability$ flags for the
-  drive. Refer to section \ref{capability} for more information on
-  these flags.
-\item[CDROM_LOCKDOOR] Locks the door of the drive. $arg == \rm0$
-  unlocks the door, any other value locks it.
-\item[CDROM_DEBUG] Turns on debugging info. Only root is allowed
-  to do this. Same semantics as CDROM_LOCKDOOR.
-\end{description}
-
-\subsubsection{Device dependent $ioctl$s}
-
-Finally, all other $ioctl$s are passed to the function $dev_ioctl()$,
-if implemented. No memory allocation or verification is carried out. 
-
-\newsection{How to update your driver}
-
-\begin{enumerate}
-\item Make a backup of your current driver. 
-\item Get hold of the files \cdromc\ and \cdromh, they should be in
-  the directory tree that came with this documentation.
-\item Make sure you include \cdromh.
-\item Change the 3rd argument of $register_blkdev$ from
-$\&<your-drive>_fops$ to $\&cdrom_fops$. 
-\item Just after that line, add the following to register with the \UCD:
-  $$register_cdrom(\&<your-drive>_info);$$
-  Similarly, add a call to $unregister_cdrom()$ at the appropriate place.
-\item Copy an example of the device-operations $struct$ to your
-  source, \eg, from {\tt {cm206.c}} $cm206_dops$, and change all
-  entries to names corresponding to your driver, or names you just
-  happen to like. If your driver doesn't support a certain function,
-  make the entry $NULL$. At the entry $capability$ you should list all
-  capabilities your driver currently supports. If your driver
-  has a capability that is not listed, please send me a message.
-\item Copy the $cdrom_device_info$ declaration from the same example
-  driver, and modify the entries according to your needs. If your
-  driver dynamically determines the capabilities of the hardware, this
-  structure should also be declared dynamically. 
-\item Implement all functions in your $<device>_dops$ structure,
-  according to prototypes listed in \cdromh, and specifications given
-  in section~\ref{cdrom.c}. Most likely you have already implemented
-  the code in a large part, and you will almost certainly need to adapt the
-  prototype and return values.
-\item Rename your $<device>_ioctl()$ function to $audio_ioctl$ and
-  change the prototype a little. Remove entries listed in the first
-  part in section~\ref{cdrom-ioctl}, if your code was OK, these are
-  just calls to the routines you adapted in the previous step.
-\item You may remove all remaining memory checking code in the
-  $audio_ioctl()$ function that deals with audio commands (these are
-  listed in the second part of section~\ref{cdrom-ioctl}). There is no
-  need for memory allocation either, so most $case$s in the $switch$
-  statement look similar to:
-  $$
-  case\ CDROMREADTOCENTRY\colon get_toc_entry\bigl((struct\ 
-  cdrom_tocentry *{})\ arg\bigr);
-  $$
-\item All remaining $ioctl$ cases must be moved to a separate
-  function, $<device>_ioctl$, the device-dependent $ioctl$s. Note that
-  memory checking and allocation must be kept in this code!
-\item Change the prototypes of $<device>_open()$ and
-  $<device>_release()$, and remove any strategic code (\ie, tray
-  movement, door locking, etc.).
-\item Try to recompile the drivers. We advise you to use modules, both
-  for {\tt {cdrom.o}} and your driver, as debugging is much easier this
-  way.
-\end{enumerate} 
-
-\newsection{Thanks}
-
-Thanks to all the people involved.  First, Erik Andersen, who has
-taken over the torch in maintaining \cdromc\ and integrating much
-\cdrom-related code in the 2.1-kernel.  Thanks to Scott Snyder and
-Gerd Knorr, who were the first to implement this interface for SCSI
-and IDE-CD drivers and added many ideas for extension of the data
-structures relative to kernel~2.0.  Further thanks to Heiko Ei{\ss}feldt,
-Thomas Quinot, Jon Tombs, Ken Pizzini, Eberhard M\"onkeberg and Andrew
-Kroll, the \linux\ \cdrom\ device driver developers who were kind
-enough to give suggestions and criticisms during the writing. Finally
-of course, I want to thank Linus Torvalds for making this possible in
-the first place.
-
-\vfill
-$ \version\ $
-\eject
-\end{document}
diff --git a/Documentation/cdrom/cdrom-standard.txt b/Documentation/cdrom/cdrom-standard.txt
new file mode 100644
index 000000000000..dde4f7f7fdbf
--- /dev/null
+++ b/Documentation/cdrom/cdrom-standard.txt
@@ -0,0 +1,1063 @@
+=======================
+A Linux CD-ROM standard
+=======================
+
+:Author: David van Leeuwen <david@ElseWare.cistron.nl>
+:Date: 12 March 1999
+:Updated by: Erik Andersen (andersee@debian.org)
+:Updated by: Jens Axboe (axboe@image.dk)
+
+
+Introduction
+============
+
+Linux is probably the Unix-like operating system that supports
+the widest variety of hardware devices. The reasons for this are
+presumably
+
+- The large list of hardware devices available for the many platforms
+  that Linux now supports (i.e., i386-PCs, Sparc Suns, etc.)
+- The open design of the operating system, such that anybody can write a
+  driver for Linux.
+- There is plenty of source code around as examples of how to write a driver.
+
+The openness of Linux, and the many different types of available
+hardware has allowed Linux to support many different hardware devices.
+Unfortunately, the very openness that has allowed Linux to support
+all these different devices has also allowed the behavior of each
+device driver to differ significantly from one device to another.
+This divergence of behavior has been very significant for CD-ROM
+devices; the way a particular drive reacts to a `standard` *ioctl()*
+call varies greatly from one device driver to another. To avoid making
+their drivers totally inconsistent, the writers of Linux CD-ROM
+drivers generally created new device drivers by understanding, copying,
+and then changing an existing one. Unfortunately, this practice did not
+maintain uniform behavior across all the Linux CD-ROM drivers.
+
+This document describes an effort to establish Uniform behavior across
+all the different CD-ROM device drivers for Linux. This document also
+defines the various *ioctl()'s*, and how the low-level CD-ROM device
+drivers should implement them. Currently (as of the Linux 2.1.\ *x*
+development kernels) several low-level CD-ROM device drivers, including
+both IDE/ATAPI and SCSI, now use this Uniform interface.
+
+When the CD-ROM was developed, the interface between the CD-ROM drive
+and the computer was not specified in the standards. As a result, many
+different CD-ROM interfaces were developed. Some of them had their
+own proprietary design (Sony, Mitsumi, Panasonic, Philips), other
+manufacturers adopted an existing electrical interface and changed
+the functionality (CreativeLabs/SoundBlaster, Teac, Funai) or simply
+adapted their drives to one or more of the already existing electrical
+interfaces (Aztech, Sanyo, Funai, Vertos, Longshine, Optics Storage and
+most of the `NoName` manufacturers). In cases where a new drive really
+brought its own interface or used its own command set and flow control
+scheme, either a separate driver had to be written, or an existing
+driver had to be enhanced. History has delivered us CD-ROM support for
+many of these different interfaces. Nowadays, almost all new CD-ROM
+drives are either IDE/ATAPI or SCSI, and it is very unlikely that any
+manufacturer will create a new interface. Even finding drives for the
+old proprietary interfaces is getting difficult.
+
+When (in the 1.3.70's) I looked at the existing software interface,
+which was expressed through `cdrom.h`, it appeared to be a rather wild
+set of commands and data formats [#f1]_. It seemed that many
+features of the software interface had been added to accommodate the
+capabilities of a particular drive, in an *ad hoc* manner. More
+importantly, it appeared that the behavior of the `standard` commands
+was different for most of the different drivers: e. g., some drivers
+close the tray if an *open()* call occurs when the tray is open, while
+others do not. Some drivers lock the door upon opening the device, to
+prevent an incoherent file system, but others don't, to allow software
+ejection. Undoubtedly, the capabilities of the different drives vary,
+but even when two drives have the same capability their drivers'
+behavior was usually different.
+
+.. [#f1]
+   I cannot recollect what kernel version I looked at, then,
+   presumably 1.2.13 and 1.3.34 --- the latest kernel that I was
+   indirectly involved in.
+
+I decided to start a discussion on how to make all the Linux CD-ROM
+drivers behave more uniformly. I began by contacting the developers of
+the many CD-ROM drivers found in the Linux kernel. Their reactions
+encouraged me to write the Uniform CD-ROM Driver which this document is
+intended to describe. The implementation of the Uniform CD-ROM Driver is
+in the file `cdrom.c`. This driver is intended to be an additional software
+layer that sits on top of the low-level device drivers for each CD-ROM drive.
+By adding this additional layer, it is possible to have all the different
+CD-ROM devices behave **exactly** the same (insofar as the underlying
+hardware will allow).
+
+The goal of the Uniform CD-ROM Driver is **not** to alienate driver developers
+whohave not yet taken steps to support this effort. The goal of Uniform CD-ROM
+Driver is simply to give people writing application programs for CD-ROM drives
+**one** Linux CD-ROM interface with consistent behavior for all
+CD-ROM devices. In addition, this also provides a consistent interface
+between the low-level device driver code and the Linux kernel. Care
+is taken that 100% compatibility exists with the data structures and
+programmer's interface defined in `cdrom.h`. This guide was written to
+help CD-ROM driver developers adapt their code to use the Uniform CD-ROM
+Driver code defined in `cdrom.c`.
+
+Personally, I think that the most important hardware interfaces are
+the IDE/ATAPI drives and, of course, the SCSI drives, but as prices
+of hardware drop continuously, it is also likely that people may have
+more than one CD-ROM drive, possibly of mixed types. It is important
+that these drives behave in the same way. In December 1994, one of the
+cheapest CD-ROM drives was a Philips cm206, a double-speed proprietary
+drive. In the months that I was busy writing a Linux driver for it,
+proprietary drives became obsolete and IDE/ATAPI drives became the
+standard. At the time of the last update to this document (November
+1997) it is becoming difficult to even **find** anything less than a
+16 speed CD-ROM drive, and 24 speed drives are common.
+
+.. _cdrom_api:
+
+Standardizing through another software level
+============================================
+
+At the time this document was conceived, all drivers directly
+implemented the CD-ROM *ioctl()* calls through their own routines. This
+led to the danger of different drivers forgetting to do important things
+like checking that the user was giving the driver valid data. More
+importantly, this led to the divergence of behavior, which has already
+been discussed.
+
+For this reason, the Uniform CD-ROM Driver was created to enforce consistent
+CD-ROM drive behavior, and to provide a common set of services to the various
+low-level CD-ROM device drivers. The Uniform CD-ROM Driver now provides another
+software-level, that separates the *ioctl()* and *open()* implementation
+from the actual hardware implementation. Note that this effort has
+made few changes which will affect a user's application programs. The
+greatest change involved moving the contents of the various low-level
+CD-ROM drivers\' header files to the kernel's cdrom directory. This was
+done to help ensure that the user is only presented with only one cdrom
+interface, the interface defined in `cdrom.h`.
+
+CD-ROM drives are specific enough (i. e., different from other
+block-devices such as floppy or hard disc drives), to define a set
+of common **CD-ROM device operations**, *<cdrom-device>_dops*.
+These operations are different from the classical block-device file
+operations, *<block-device>_fops*.
+
+The routines for the Uniform CD-ROM Driver interface level are implemented
+in the file `cdrom.c`. In this file, the Uniform CD-ROM Driver interfaces
+with the kernel as a block device by registering the following general
+*struct file_operations*::
+
+	struct file_operations cdrom_fops = {
+		NULL,			/∗ lseek ∗/
+		block _read ,		/∗ read—general block-dev read ∗/
+		block _write,		/∗ write—general block-dev write ∗/
+		NULL,			/∗ readdir ∗/
+		NULL,			/∗ select ∗/
+		cdrom_ioctl,		/∗ ioctl ∗/
+		NULL,			/∗ mmap ∗/
+		cdrom_open,		/∗ open ∗/
+		cdrom_release,		/∗ release ∗/
+		NULL,			/∗ fsync ∗/
+		NULL,			/∗ fasync ∗/
+		cdrom_media_changed,	/∗ media change ∗/
+		NULL			/∗ revalidate ∗/
+	};
+
+Every active CD-ROM device shares this *struct*. The routines
+declared above are all implemented in `cdrom.c`, since this file is the
+place where the behavior of all CD-ROM-devices is defined and
+standardized. The actual interface to the various types of CD-ROM
+hardware is still performed by various low-level CD-ROM-device
+drivers. These routines simply implement certain **capabilities**
+that are common to all CD-ROM (and really, all removable-media
+devices).
+
+Registration of a low-level CD-ROM device driver is now done through
+the general routines in `cdrom.c`, not through the Virtual File System
+(VFS) any more. The interface implemented in `cdrom.c` is carried out
+through two general structures that contain information about the
+capabilities of the driver, and the specific drives on which the
+driver operates. The structures are:
+
+cdrom_device_ops
+  This structure contains information about the low-level driver for a
+  CD-ROM device. This structure is conceptually connected to the major
+  number of the device (although some drivers may have different
+  major numbers, as is the case for the IDE driver).
+
+cdrom_device_info
+  This structure contains information about a particular CD-ROM drive,
+  such as its device name, speed, etc. This structure is conceptually
+  connected to the minor number of the device.
+
+Registering a particular CD-ROM drive with the Uniform CD-ROM Driver
+is done by the low-level device driver though a call to::
+
+	register_cdrom(struct cdrom_device_info * <device>_info)
+
+The device information structure, *<device>_info*, contains all the
+information needed for the kernel to interface with the low-level
+CD-ROM device driver. One of the most important entries in this
+structure is a pointer to the *cdrom_device_ops* structure of the
+low-level driver.
+
+The device operations structure, *cdrom_device_ops*, contains a list
+of pointers to the functions which are implemented in the low-level
+device driver. When `cdrom.c` accesses a CD-ROM device, it does it
+through the functions in this structure. It is impossible to know all
+the capabilities of future CD-ROM drives, so it is expected that this
+list may need to be expanded from time to time as new technologies are
+developed. For example, CD-R and CD-R/W drives are beginning to become
+popular, and support will soon need to be added for them. For now, the
+current *struct* is::
+
+	struct cdrom_device_ops {
+		int (*open)(struct cdrom_device_info *, int)
+		void (*release)(struct cdrom_device_info *);
+		int (*drive_status)(struct cdrom_device_info *, int);
+		unsigned int (*check_events)(struct cdrom_device_info *,
+					     unsigned int, int);
+		int (*media_changed)(struct cdrom_device_info *, int);
+		int (*tray_move)(struct cdrom_device_info *, int);
+		int (*lock_door)(struct cdrom_device_info *, int);
+		int (*select_speed)(struct cdrom_device_info *, int);
+		int (*select_disc)(struct cdrom_device_info *, int);
+		int (*get_last_session) (struct cdrom_device_info *,
+					 struct cdrom_multisession *);
+		int (*get_mcn)(struct cdrom_device_info *, struct cdrom_mcn *);
+		int (*reset)(struct cdrom_device_info *);
+		int (*audio_ioctl)(struct cdrom_device_info *,
+				   unsigned int, void *);
+		const int capability;		/* capability flags */
+		int (*generic_packet)(struct cdrom_device_info *,
+				      struct packet_command *);
+	};
+
+When a low-level device driver implements one of these capabilities,
+it should add a function pointer to this *struct*. When a particular
+function is not implemented, however, this *struct* should contain a
+NULL instead. The *capability* flags specify the capabilities of the
+CD-ROM hardware and/or low-level CD-ROM driver when a CD-ROM drive
+is registered with the Uniform CD-ROM Driver.
+
+Note that most functions have fewer parameters than their
+*blkdev_fops* counterparts. This is because very little of the
+information in the structures *inode* and *file* is used. For most
+drivers, the main parameter is the *struct* *cdrom_device_info*, from
+which the major and minor number can be extracted. (Most low-level
+CD-ROM drivers don't even look at the major and minor number though,
+since many of them only support one device.) This will be available
+through *dev* in *cdrom_device_info* described below.
+
+The drive-specific, minor-like information that is registered with
+`cdrom.c`, currently contains the following fields::
+
+  struct cdrom_device_info {
+	const struct cdrom_device_ops * ops; 	/* device operations for this major */
+	struct list_head list;			/* linked list of all device_info */
+	struct gendisk * disk;			/* matching block layer disk */
+	void *  handle;				/* driver-dependent data */
+
+	int mask; 				/* mask of capability: disables them */
+	int speed;				/* maximum speed for reading data */
+	int capacity;				/* number of discs in a jukebox */
+
+	unsigned int options:30;		/* options flags */
+	unsigned mc_flags:2;			/*  media-change buffer flags */
+	unsigned int vfs_events;		/*  cached events for vfs path */
+	unsigned int ioctl_events;		/*  cached events for ioctl path */
+	int use_count;				/*  number of times device is opened */
+	char name[20];				/*  name of the device type */
+
+	__u8 sanyo_slot : 2;			/*  Sanyo 3-CD changer support */
+	__u8 keeplocked : 1;			/*  CDROM_LOCKDOOR status */
+	__u8 reserved : 5;			/*  not used yet */
+	int cdda_method;			/*  see CDDA_* flags */
+	__u8 last_sense;			/*  saves last sense key */
+	__u8 media_written;			/*  dirty flag, DVD+RW bookkeeping */
+	unsigned short mmc3_profile;		/*  current MMC3 profile */
+	int for_data;				/*  unknown:TBD */
+	int (*exit)(struct cdrom_device_info *);/*  unknown:TBD */
+	int mrw_mode_page;			/*  which MRW mode page is in use */
+  };
+
+Using this *struct*, a linked list of the registered minor devices is
+built, using the *next* field. The device number, the device operations
+struct and specifications of properties of the drive are stored in this
+structure.
+
+The *mask* flags can be used to mask out some of the capabilities listed
+in *ops->capability*, if a specific drive doesn't support a feature
+of the driver. The value *speed* specifies the maximum head-rate of the
+drive, measured in units of normal audio speed (176kB/sec raw data or
+150kB/sec file system data). The parameters are declared *const*
+because they describe properties of the drive, which don't change after
+registration.
+
+A few registers contain variables local to the CD-ROM drive. The
+flags *options* are used to specify how the general CD-ROM routines
+should behave. These various flags registers should provide enough
+flexibility to adapt to the different users' wishes (and **not** the
+`arbitrary` wishes of the author of the low-level device driver, as is
+the case in the old scheme). The register *mc_flags* is used to buffer
+the information from *media_changed()* to two separate queues. Other
+data that is specific to a minor drive, can be accessed through *handle*,
+which can point to a data structure specific to the low-level driver.
+The fields *use_count*, *next*, *options* and *mc_flags* need not be
+initialized.
+
+The intermediate software layer that `cdrom.c` forms will perform some
+additional bookkeeping. The use count of the device (the number of
+processes that have the device opened) is registered in *use_count*. The
+function *cdrom_ioctl()* will verify the appropriate user-memory regions
+for read and write, and in case a location on the CD is transferred,
+it will `sanitize` the format by making requests to the low-level
+drivers in a standard format, and translating all formats between the
+user-software and low level drivers. This relieves much of the drivers'
+memory checking and format checking and translation. Also, the necessary
+structures will be declared on the program stack.
+
+The implementation of the functions should be as defined in the
+following sections. Two functions **must** be implemented, namely
+*open()* and *release()*. Other functions may be omitted, their
+corresponding capability flags will be cleared upon registration.
+Generally, a function returns zero on success and negative on error. A
+function call should return only after the command has completed, but of
+course waiting for the device should not use processor time.
+
+::
+
+	int open(struct cdrom_device_info *cdi, int purpose)
+
+*Open()* should try to open the device for a specific *purpose*, which
+can be either:
+
+- Open for reading data, as done by `mount()` (2), or the
+  user commands `dd` or `cat`.
+- Open for *ioctl* commands, as done by audio-CD playing programs.
+
+Notice that any strategic code (closing tray upon *open()*, etc.) is
+done by the calling routine in `cdrom.c`, so the low-level routine
+should only be concerned with proper initialization, such as spinning
+up the disc, etc.
+
+::
+
+	void release(struct cdrom_device_info *cdi)
+
+Device-specific actions should be taken such as spinning down the device.
+However, strategic actions such as ejection of the tray, or unlocking
+the door, should be left over to the general routine *cdrom_release()*.
+This is the only function returning type *void*.
+
+.. _cdrom_drive_status:
+
+::
+
+	int drive_status(struct cdrom_device_info *cdi, int slot_nr)
+
+The function *drive_status*, if implemented, should provide
+information on the status of the drive (not the status of the disc,
+which may or may not be in the drive). If the drive is not a changer,
+*slot_nr* should be ignored. In `cdrom.h` the possibilities are listed::
+
+
+	CDS_NO_INFO		/* no information available */
+	CDS_NO_DISC		/* no disc is inserted, tray is closed */
+	CDS_TRAY_OPEN		/* tray is opened */
+	CDS_DRIVE_NOT_READY	/* something is wrong, tray is moving? */
+	CDS_DISC_OK		/* a disc is loaded and everything is fine */
+
+::
+
+	int media_changed(struct cdrom_device_info *cdi, int disc_nr)
+
+This function is very similar to the original function in $struct
+file_operations*. It returns 1 if the medium of the device *cdi->dev*
+has changed since the last call, and 0 otherwise. The parameter
+*disc_nr* identifies a specific slot in a juke-box, it should be
+ignored for single-disc drives. Note that by `re-routing` this
+function through *cdrom_media_changed()*, we can implement separate
+queues for the VFS and a new *ioctl()* function that can report device
+changes to software (e. g., an auto-mounting daemon).
+
+::
+
+	int tray_move(struct cdrom_device_info *cdi, int position)
+
+This function, if implemented, should control the tray movement. (No
+other function should control this.) The parameter *position* controls
+the desired direction of movement:
+
+- 0 Close tray
+- 1 Open tray
+
+This function returns 0 upon success, and a non-zero value upon
+error. Note that if the tray is already in the desired position, no
+action need be taken, and the return value should be 0.
+
+::
+
+	int lock_door(struct cdrom_device_info *cdi, int lock)
+
+This function (and no other code) controls locking of the door, if the
+drive allows this. The value of *lock* controls the desired locking
+state:
+
+- 0 Unlock door, manual opening is allowed
+- 1 Lock door, tray cannot be ejected manually
+
+This function returns 0 upon success, and a non-zero value upon
+error. Note that if the door is already in the requested state, no
+action need be taken, and the return value should be 0.
+
+::
+
+	int select_speed(struct cdrom_device_info *cdi, int speed)
+
+Some CD-ROM drives are capable of changing their head-speed. There
+are several reasons for changing the speed of a CD-ROM drive. Badly
+pressed CD-ROM s may benefit from less-than-maximum head rate. Modern
+CD-ROM drives can obtain very high head rates (up to *24x* is
+common). It has been reported that these drives can make reading
+errors at these high speeds, reducing the speed can prevent data loss
+in these circumstances. Finally, some of these drives can
+make an annoyingly loud noise, which a lower speed may reduce.
+
+This function specifies the speed at which data is read or audio is
+played back. The value of *speed* specifies the head-speed of the
+drive, measured in units of standard cdrom speed (176kB/sec raw data
+or 150kB/sec file system data). So to request that a CD-ROM drive
+operate at 300kB/sec you would call the CDROM_SELECT_SPEED *ioctl*
+with *speed=2*. The special value `0` means `auto-selection`, i. e.,
+maximum data-rate or real-time audio rate. If the drive doesn't have
+this `auto-selection` capability, the decision should be made on the
+current disc loaded and the return value should be positive. A negative
+return value indicates an error.
+
+::
+
+	int select_disc(struct cdrom_device_info *cdi, int number)
+
+If the drive can store multiple discs (a juke-box) this function
+will perform disc selection. It should return the number of the
+selected disc on success, a negative value on error. Currently, only
+the ide-cd driver supports this functionality.
+
+::
+
+	int get_last_session(struct cdrom_device_info *cdi,
+			     struct cdrom_multisession *ms_info)
+
+This function should implement the old corresponding *ioctl()*. For
+device *cdi->dev*, the start of the last session of the current disc
+should be returned in the pointer argument *ms_info*. Note that
+routines in `cdrom.c` have sanitized this argument: its requested
+format will **always** be of the type *CDROM_LBA* (linear block
+addressing mode), whatever the calling software requested. But
+sanitization goes even further: the low-level implementation may
+return the requested information in *CDROM_MSF* format if it wishes so
+(setting the *ms_info->addr_format* field appropriately, of
+course) and the routines in `cdrom.c` will make the transformation if
+necessary. The return value is 0 upon success.
+
+::
+
+	int get_mcn(struct cdrom_device_info *cdi,
+		    struct cdrom_mcn *mcn)
+
+Some discs carry a `Media Catalog Number` (MCN), also called
+`Universal Product Code` (UPC). This number should reflect the number
+that is generally found in the bar-code on the product. Unfortunately,
+the few discs that carry such a number on the disc don't even use the
+same format. The return argument to this function is a pointer to a
+pre-declared memory region of type *struct cdrom_mcn*. The MCN is
+expected as a 13-character string, terminated by a null-character.
+
+::
+
+	int reset(struct cdrom_device_info *cdi)
+
+This call should perform a hard-reset on the drive (although in
+circumstances that a hard-reset is necessary, a drive may very well not
+listen to commands anymore). Preferably, control is returned to the
+caller only after the drive has finished resetting. If the drive is no
+longer listening, it may be wise for the underlying low-level cdrom
+driver to time out.
+
+::
+
+	int audio_ioctl(struct cdrom_device_info *cdi,
+			unsigned int cmd, void *arg)
+
+Some of the CD-ROM-\ *ioctl()*\ 's defined in `cdrom.h` can be
+implemented by the routines described above, and hence the function
+*cdrom_ioctl* will use those. However, most *ioctl()*\ 's deal with
+audio-control. We have decided to leave these to be accessed through a
+single function, repeating the arguments *cmd* and *arg*. Note that
+the latter is of type *void*, rather than *unsigned long int*.
+The routine *cdrom_ioctl()* does do some useful things,
+though. It sanitizes the address format type to *CDROM_MSF* (Minutes,
+Seconds, Frames) for all audio calls. It also verifies the memory
+location of *arg*, and reserves stack-memory for the argument. This
+makes implementation of the *audio_ioctl()* much simpler than in the
+old driver scheme. For example, you may look up the function
+*cm206_audio_ioctl()* `cm206.c` that should be updated with
+this documentation.
+
+An unimplemented ioctl should return *-ENOSYS*, but a harmless request
+(e. g., *CDROMSTART*) may be ignored by returning 0 (success). Other
+errors should be according to the standards, whatever they are. When
+an error is returned by the low-level driver, the Uniform CD-ROM Driver
+tries whenever possible to return the error code to the calling program.
+(We may decide to sanitize the return value in *cdrom_ioctl()* though, in
+order to guarantee a uniform interface to the audio-player software.)
+
+::
+
+	int dev_ioctl(struct cdrom_device_info *cdi,
+		      unsigned int cmd, unsigned long arg)
+
+Some *ioctl()'s* seem to be specific to certain CD-ROM drives. That is,
+they are introduced to service some capabilities of certain drives. In
+fact, there are 6 different *ioctl()'s* for reading data, either in some
+particular kind of format, or audio data. Not many drives support
+reading audio tracks as data, I believe this is because of protection
+of copyrights of artists. Moreover, I think that if audio-tracks are
+supported, it should be done through the VFS and not via *ioctl()'s*. A
+problem here could be the fact that audio-frames are 2352 bytes long,
+so either the audio-file-system should ask for 75264 bytes at once
+(the least common multiple of 512 and 2352), or the drivers should
+bend their backs to cope with this incoherence (to which I would be
+opposed). Furthermore, it is very difficult for the hardware to find
+the exact frame boundaries, since there are no synchronization headers
+in audio frames. Once these issues are resolved, this code should be
+standardized in `cdrom.c`.
+
+Because there are so many *ioctl()'s* that seem to be introduced to
+satisfy certain drivers [#f2]_, any non-standard *ioctl()*\ s
+are routed through the call *dev_ioctl()*. In principle, `private`
+*ioctl()*\ 's should be numbered after the device's major number, and not
+the general CD-ROM *ioctl* number, `0x53`. Currently the
+non-supported *ioctl()'s* are:
+
+	CDROMREADMODE1, CDROMREADMODE2, CDROMREADAUDIO, CDROMREADRAW,
+	CDROMREADCOOKED, CDROMSEEK, CDROMPLAY-BLK and CDROM-READALL
+
+.. [#f2]
+
+   Is there software around that actually uses these? I'd be interested!
+
+.. _cdrom_capabilities:
+
+CD-ROM capabilities
+-------------------
+
+Instead of just implementing some *ioctl* calls, the interface in
+`cdrom.c` supplies the possibility to indicate the **capabilities**
+of a CD-ROM drive. This can be done by ORing any number of
+capability-constants that are defined in `cdrom.h` at the registration
+phase. Currently, the capabilities are any of::
+
+	CDC_CLOSE_TRAY		/* can close tray by software control */
+	CDC_OPEN_TRAY		/* can open tray */
+	CDC_LOCK		/* can lock and unlock the door */
+	CDC_SELECT_SPEED	/* can select speed, in units of * sim*150 ,kB/s */
+	CDC_SELECT_DISC		/* drive is juke-box */
+	CDC_MULTI_SESSION	/* can read sessions *> rm1* */
+	CDC_MCN			/* can read Media Catalog Number */
+	CDC_MEDIA_CHANGED	/* can report if disc has changed */
+	CDC_PLAY_AUDIO		/* can perform audio-functions (play, pause, etc) */
+	CDC_RESET		/* hard reset device */
+	CDC_IOCTLS		/* driver has non-standard ioctls */
+	CDC_DRIVE_STATUS	/* driver implements drive status */
+
+The capability flag is declared *const*, to prevent drivers from
+accidentally tampering with the contents. The capability fags actually
+inform `cdrom.c` of what the driver can do. If the drive found
+by the driver does not have the capability, is can be masked out by
+the *cdrom_device_info* variable *mask*. For instance, the SCSI CD-ROM
+driver has implemented the code for loading and ejecting CD-ROM's, and
+hence its corresponding flags in *capability* will be set. But a SCSI
+CD-ROM drive might be a caddy system, which can't load the tray, and
+hence for this drive the *cdrom_device_info* struct will have set
+the *CDC_CLOSE_TRAY* bit in *mask*.
+
+In the file `cdrom.c` you will encounter many constructions of the type::
+
+	if (cdo->capability & ∼cdi->mask & CDC _⟨capability⟩) ...
+
+There is no *ioctl* to set the mask... The reason is that
+I think it is better to control the **behavior** rather than the
+**capabilities**.
+
+Options
+-------
+
+A final flag register controls the **behavior** of the CD-ROM
+drives, in order to satisfy different users' wishes, hopefully
+independently of the ideas of the respective author who happened to
+have made the drive's support available to the Linux community. The
+current behavior options are::
+
+	CDO_AUTO_CLOSE	/* try to close tray upon device open() */
+	CDO_AUTO_EJECT	/* try to open tray on last device close() */
+	CDO_USE_FFLAGS	/* use file_pointer->f_flags to indicate purpose for open() */
+	CDO_LOCK	/* try to lock door if device is opened */
+	CDO_CHECK_TYPE	/* ensure disc type is data if opened for data */
+
+The initial value of this register is
+`CDO_AUTO_CLOSE | CDO_USE_FFLAGS | CDO_LOCK`, reflecting my own view on user
+interface and software standards. Before you protest, there are two
+new *ioctl()'s* implemented in `cdrom.c`, that allow you to control the
+behavior by software. These are::
+
+	CDROM_SET_OPTIONS	/* set options specified in (int)arg */
+	CDROM_CLEAR_OPTIONS	/* clear options specified in (int)arg */
+
+One option needs some more explanation: *CDO_USE_FFLAGS*. In the next
+newsection we explain what the need for this option is.
+
+A software package `setcd`, available from the Debian distribution
+and `sunsite.unc.edu`, allows user level control of these flags.
+
+
+The need to know the purpose of opening the CD-ROM device
+=========================================================
+
+Traditionally, Unix devices can be used in two different `modes`,
+either by reading/writing to the device file, or by issuing
+controlling commands to the device, by the device's *ioctl()*
+call. The problem with CD-ROM drives, is that they can be used for
+two entirely different purposes. One is to mount removable
+file systems, CD-ROM's, the other is to play audio CD's. Audio commands
+are implemented entirely through *ioctl()\'s*, presumably because the
+first implementation (SUN?) has been such. In principle there is
+nothing wrong with this, but a good control of the `CD player` demands
+that the device can **always** be opened in order to give the
+*ioctl* commands, regardless of the state the drive is in.
+
+On the other hand, when used as a removable-media disc drive (what the
+original purpose of CD-ROM s is) we would like to make sure that the
+disc drive is ready for operation upon opening the device. In the old
+scheme, some CD-ROM drivers don't do any integrity checking, resulting
+in a number of i/o errors reported by the VFS to the kernel when an
+attempt for mounting a CD-ROM on an empty drive occurs. This is not a
+particularly elegant way to find out that there is no CD-ROM inserted;
+it more-or-less looks like the old IBM-PC trying to read an empty floppy
+drive for a couple of seconds, after which the system complains it
+can't read from it. Nowadays we can **sense** the existence of a
+removable medium in a drive, and we believe we should exploit that
+fact. An integrity check on opening of the device, that verifies the
+availability of a CD-ROM and its correct type (data), would be
+desirable.
+
+These two ways of using a CD-ROM drive, principally for data and
+secondarily for playing audio discs, have different demands for the
+behavior of the *open()* call. Audio use simply wants to open the
+device in order to get a file handle which is needed for issuing
+*ioctl* commands, while data use wants to open for correct and
+reliable data transfer. The only way user programs can indicate what
+their *purpose* of opening the device is, is through the *flags*
+parameter (see `open(2)`). For CD-ROM devices, these flags aren't
+implemented (some drivers implement checking for write-related flags,
+but this is not strictly necessary if the device file has correct
+permission flags). Most option flags simply don't make sense to
+CD-ROM devices: *O_CREAT*, *O_NOCTTY*, *O_TRUNC*, *O_APPEND*, and
+*O_SYNC* have no meaning to a CD-ROM.
+
+We therefore propose to use the flag *O_NONBLOCK* to indicate
+that the device is opened just for issuing *ioctl*
+commands. Strictly, the meaning of *O_NONBLOCK* is that opening and
+subsequent calls to the device don't cause the calling process to
+wait. We could interpret this as don't wait until someone has
+inserted some valid data-CD-ROM. Thus, our proposal of the
+implementation for the *open()* call for CD-ROM s is:
+
+- If no other flags are set than *O_RDONLY*, the device is opened
+  for data transfer, and the return value will be 0 only upon successful
+  initialization of the transfer. The call may even induce some actions
+  on the CD-ROM, such as closing the tray.
+- If the option flag *O_NONBLOCK* is set, opening will always be
+  successful, unless the whole device doesn't exist. The drive will take
+  no actions whatsoever.
+
+And what about standards?
+-------------------------
+
+You might hesitate to accept this proposal as it comes from the
+Linux community, and not from some standardizing institute. What
+about SUN, SGI, HP and all those other Unix and hardware vendors?
+Well, these companies are in the lucky position that they generally
+control both the hardware and software of their supported products,
+and are large enough to set their own standard. They do not have to
+deal with a dozen or more different, competing hardware
+configurations\ [#f3]_.
+
+.. [#f3]
+
+   Incidentally, I think that SUN's approach to mounting CD-ROM s is very
+   good in origin: under Solaris a volume-daemon automatically mounts a
+   newly inserted CD-ROM under `/cdrom/*<volume-name>*`.
+
+   In my opinion they should have pushed this
+   further and have **every** CD-ROM on the local area network be
+   mounted at the similar location, i. e., no matter in which particular
+   machine you insert a CD-ROM, it will always appear at the same
+   position in the directory tree, on every system. When I wanted to
+   implement such a user-program for Linux, I came across the
+   differences in behavior of the various drivers, and the need for an
+   *ioctl* informing about media changes.
+
+We believe that using *O_NONBLOCK* to indicate that a device is being opened
+for *ioctl* commands only can be easily introduced in the Linux
+community. All the CD-player authors will have to be informed, we can
+even send in our own patches to the programs. The use of *O_NONBLOCK*
+has most likely no influence on the behavior of the CD-players on
+other operating systems than Linux. Finally, a user can always revert
+to old behavior by a call to
+*ioctl(file_descriptor, CDROM_CLEAR_OPTIONS, CDO_USE_FFLAGS)*.
+
+The preferred strategy of *open()*
+----------------------------------
+
+The routines in `cdrom.c` are designed in such a way that run-time
+configuration of the behavior of CD-ROM devices (of **any** type)
+can be carried out, by the *CDROM_SET/CLEAR_OPTIONS* *ioctls*. Thus, various
+modes of operation can be set:
+
+`CDO_AUTO_CLOSE | CDO_USE_FFLAGS | CDO_LOCK`
+   This is the default setting. (With *CDO_CHECK_TYPE* it will be better, in
+   the future.) If the device is not yet opened by any other process, and if
+   the device is being opened for data (*O_NONBLOCK* is not set) and the
+   tray is found to be open, an attempt to close the tray is made. Then,
+   it is verified that a disc is in the drive and, if *CDO_CHECK_TYPE* is
+   set, that it contains tracks of type `data mode 1`. Only if all tests
+   are passed is the return value zero. The door is locked to prevent file
+   system corruption. If the drive is opened for audio (*O_NONBLOCK* is
+   set), no actions are taken and a value of 0 will be returned.
+
+`CDO_AUTO_CLOSE | CDO_AUTO_EJECT | CDO_LOCK`
+   This mimics the behavior of the current sbpcd-driver. The option flags are
+   ignored, the tray is closed on the first open, if necessary. Similarly,
+   the tray is opened on the last release, i. e., if a CD-ROM is unmounted,
+   it is automatically ejected, such that the user can replace it.
+
+We hope that these option can convince everybody (both driver
+maintainers and user program developers) to adopt the new CD-ROM
+driver scheme and option flag interpretation.
+
+Description of routines in `cdrom.c`
+====================================
+
+Only a few routines in `cdrom.c` are exported to the drivers. In this
+new section we will discuss these, as well as the functions that `take
+over' the CD-ROM interface to the kernel. The header file belonging
+to `cdrom.c` is called `cdrom.h`. Formerly, some of the contents of this
+file were placed in the file `ucdrom.h`, but this file has now been
+merged back into `cdrom.h`.
+
+::
+
+	struct file_operations cdrom_fops
+
+The contents of this structure were described in cdrom_api_.
+A pointer to this structure is assigned to the *fops* field
+of the *struct gendisk*.
+
+::
+
+	int register_cdrom(struct cdrom_device_info *cdi)
+
+This function is used in about the same way one registers *cdrom_fops*
+with the kernel, the device operations and information structures,
+as described in cdrom_api_, should be registered with the
+Uniform CD-ROM Driver::
+
+	register_cdrom(&<device>_info);
+
+
+This function returns zero upon success, and non-zero upon
+failure. The structure *<device>_info* should have a pointer to the
+driver's *<device>_dops*, as in::
+
+	struct cdrom_device_info <device>_info = {
+		<device>_dops;
+		...
+	}
+
+Note that a driver must have one static structure, *<device>_dops*, while
+it may have as many structures *<device>_info* as there are minor devices
+active. *Register_cdrom()* builds a linked list from these.
+
+
+::
+
+	void unregister_cdrom(struct cdrom_device_info *cdi)
+
+Unregistering device *cdi* with minor number *MINOR(cdi->dev)* removes
+the minor device from the list. If it was the last registered minor for
+the low-level driver, this disconnects the registered device-operation
+routines from the CD-ROM interface. This function returns zero upon
+success, and non-zero upon failure.
+
+::
+
+	int cdrom_open(struct inode * ip, struct file * fp)
+
+This function is not called directly by the low-level drivers, it is
+listed in the standard *cdrom_fops*. If the VFS opens a file, this
+function becomes active. A strategy is implemented in this routine,
+taking care of all capabilities and options that are set in the
+*cdrom_device_ops* connected to the device. Then, the program flow is
+transferred to the device_dependent *open()* call.
+
+::
+
+	void cdrom_release(struct inode *ip, struct file *fp)
+
+This function implements the reverse-logic of *cdrom_open()*, and then
+calls the device-dependent *release()* routine. When the use-count has
+reached 0, the allocated buffers are flushed by calls to *sync_dev(dev)*
+and *invalidate_buffers(dev)*.
+
+
+.. _cdrom_ioctl:
+
+::
+
+	int cdrom_ioctl(struct inode *ip, struct file *fp,
+			unsigned int cmd, unsigned long arg)
+
+This function handles all the standard *ioctl* requests for CD-ROM
+devices in a uniform way. The different calls fall into three
+categories: *ioctl()'s* that can be directly implemented by device
+operations, ones that are routed through the call *audio_ioctl()*, and
+the remaining ones, that are presumable device-dependent. Generally, a
+negative return value indicates an error.
+
+Directly implemented *ioctl()'s*
+--------------------------------
+
+The following `old` CD-ROM *ioctl()*\ 's are implemented by directly
+calling device-operations in *cdrom_device_ops*, if implemented and
+not masked:
+
+`CDROMMULTISESSION`
+	Requests the last session on a CD-ROM.
+`CDROMEJECT`
+	Open tray.
+`CDROMCLOSETRAY`
+	Close tray.
+`CDROMEJECT_SW`
+	If *arg\not=0*, set behavior to auto-close (close
+	tray on first open) and auto-eject (eject on last release), otherwise
+	set behavior to non-moving on *open()* and *release()* calls.
+`CDROM_GET_MCN`
+	Get the Media Catalog Number from a CD.
+
+*Ioctl*s routed through *audio_ioctl()*
+---------------------------------------
+
+The following set of *ioctl()'s* are all implemented through a call to
+the *cdrom_fops* function *audio_ioctl()*. Memory checks and
+allocation are performed in *cdrom_ioctl()*, and also sanitization of
+address format (*CDROM_LBA*/*CDROM_MSF*) is done.
+
+`CDROMSUBCHNL`
+	Get sub-channel data in argument *arg* of type
+	`struct cdrom_subchnl *`.
+`CDROMREADTOCHDR`
+	Read Table of Contents header, in *arg* of type
+	`struct cdrom_tochdr *`.
+`CDROMREADTOCENTRY`
+	Read a Table of Contents entry in *arg* and specified by *arg*
+	of type `struct cdrom_tocentry *`.
+`CDROMPLAYMSF`
+	Play audio fragment specified in Minute, Second, Frame format,
+	delimited by *arg* of type `struct cdrom_msf *`.
+`CDROMPLAYTRKIND`
+	Play audio fragment in track-index format delimited by *arg*
+	of type `struct cdrom_ti *`.
+`CDROMVOLCTRL`
+	Set volume specified by *arg* of type `struct cdrom_volctrl *`.
+`CDROMVOLREAD`
+	Read volume into by *arg* of type `struct cdrom_volctrl *`.
+`CDROMSTART`
+	Spin up disc.
+`CDROMSTOP`
+	Stop playback of audio fragment.
+`CDROMPAUSE`
+	Pause playback of audio fragment.
+`CDROMRESUME`
+	Resume playing.
+
+New *ioctl()'s* in `cdrom.c`
+----------------------------
+
+The following *ioctl()'s* have been introduced to allow user programs to
+control the behavior of individual CD-ROM devices. New *ioctl*
+commands can be identified by the underscores in their names.
+
+`CDROM_SET_OPTIONS`
+	Set options specified by *arg*. Returns the option flag register
+	after modification. Use *arg = \rm0* for reading the current flags.
+`CDROM_CLEAR_OPTIONS`
+	Clear options specified by *arg*. Returns the option flag register
+	after modification.
+`CDROM_SELECT_SPEED`
+	Select head-rate speed of disc specified as by *arg* in units
+	of standard cdrom speed (176\,kB/sec raw data or
+	150kB/sec file system data). The value 0 means `auto-select`,
+	i. e., play audio discs at real time and data discs at maximum speed.
+	The value *arg* is checked against the maximum head rate of the
+	drive found in the *cdrom_dops*.
+`CDROM_SELECT_DISC`
+	Select disc numbered *arg* from a juke-box.
+
+	First disc is numbered 0. The number *arg* is checked against the
+	maximum number of discs in the juke-box found in the *cdrom_dops*.
+`CDROM_MEDIA_CHANGED`
+	Returns 1 if a disc has been changed since the last call.
+	Note that calls to *cdrom_media_changed* by the VFS are treated
+	by an independent queue, so both mechanisms will detect a
+	media change once. For juke-boxes, an extra argument *arg*
+	specifies the slot for which the information is given. The special
+	value *CDSL_CURRENT* requests that information about the currently
+	selected slot be returned.
+`CDROM_DRIVE_STATUS`
+	Returns the status of the drive by a call to
+	*drive_status()*. Return values are defined in cdrom_drive_status_.
+	Note that this call doesn't return information on the
+	current playing activity of the drive; this can be polled through
+	an *ioctl* call to *CDROMSUBCHNL*. For juke-boxes, an extra argument
+	*arg* specifies the slot for which (possibly limited) information is
+	given. The special value *CDSL_CURRENT* requests that information
+	about the currently selected slot be returned.
+`CDROM_DISC_STATUS`
+	Returns the type of the disc currently in the drive.
+	It should be viewed as a complement to *CDROM_DRIVE_STATUS*.
+	This *ioctl* can provide *some* information about the current
+	disc that is inserted in the drive. This functionality used to be
+	implemented in the low level drivers, but is now carried out
+	entirely in Uniform CD-ROM Driver.
+
+	The history of development of the CD's use as a carrier medium for
+	various digital information has lead to many different disc types.
+	This *ioctl* is useful only in the case that CDs have \emph {only
+	one} type of data on them. While this is often the case, it is
+	also very common for CDs to have some tracks with data, and some
+	tracks with audio. Because this is an existing interface, rather
+	than fixing this interface by changing the assumptions it was made
+	under, thereby breaking all user applications that use this
+	function, the Uniform CD-ROM Driver implements this *ioctl* as
+	follows: If the CD in question has audio tracks on it, and it has
+	absolutely no CD-I, XA, or data tracks on it, it will be reported
+	as *CDS_AUDIO*. If it has both audio and data tracks, it will
+	return *CDS_MIXED*. If there are no audio tracks on the disc, and
+	if the CD in question has any CD-I tracks on it, it will be
+	reported as *CDS_XA_2_2*. Failing that, if the CD in question
+	has any XA tracks on it, it will be reported as *CDS_XA_2_1*.
+	Finally, if the CD in question has any data tracks on it,
+	it will be reported as a data CD (*CDS_DATA_1*).
+
+	This *ioctl* can return::
+
+		CDS_NO_INFO	/* no information available */
+		CDS_NO_DISC	/* no disc is inserted, or tray is opened */
+		CDS_AUDIO	/* Audio disc (2352 audio bytes/frame) */
+		CDS_DATA_1	/* data disc, mode 1 (2048 user bytes/frame) */
+		CDS_XA_2_1	/* mixed data (XA), mode 2, form 1 (2048 user bytes) */
+		CDS_XA_2_2	/* mixed data (XA), mode 2, form 1 (2324 user bytes) */
+		CDS_MIXED	/* mixed audio/data disc */
+
+	For some information concerning frame layout of the various disc
+	types, see a recent version of `cdrom.h`.
+
+`CDROM_CHANGER_NSLOTS`
+	Returns the number of slots in a juke-box.
+`CDROMRESET`
+	Reset the drive.
+`CDROM_GET_CAPABILITY`
+	Returns the *capability* flags for the drive. Refer to section
+	cdrom_capabilities_ for more information on these flags.
+`CDROM_LOCKDOOR`
+	 Locks the door of the drive. `arg == 0` unlocks the door,
+	 any other value locks it.
+`CDROM_DEBUG`
+	 Turns on debugging info. Only root is allowed to do this.
+	 Same semantics as CDROM_LOCKDOOR.
+
+
+Device dependent *ioctl()'s*
+----------------------------
+
+Finally, all other *ioctl()'s* are passed to the function *dev_ioctl()*,
+if implemented. No memory allocation or verification is carried out.
+
+How to update your driver
+=========================
+
+- Make a backup of your current driver.
+- Get hold of the files `cdrom.c` and `cdrom.h`, they should be in
+  the directory tree that came with this documentation.
+- Make sure you include `cdrom.h`.
+- Change the 3rd argument of *register_blkdev* from `&<your-drive>_fops`
+  to `&cdrom_fops`.
+- Just after that line, add the following to register with the Uniform
+  CD-ROM Driver::
+
+	register_cdrom(&<your-drive>_info);*
+
+  Similarly, add a call to *unregister_cdrom()* at the appropriate place.
+- Copy an example of the device-operations *struct* to your
+  source, e. g., from `cm206.c` *cm206_dops*, and change all
+  entries to names corresponding to your driver, or names you just
+  happen to like. If your driver doesn't support a certain function,
+  make the entry *NULL*. At the entry *capability* you should list all
+  capabilities your driver currently supports. If your driver
+  has a capability that is not listed, please send me a message.
+- Copy the *cdrom_device_info* declaration from the same example
+  driver, and modify the entries according to your needs. If your
+  driver dynamically determines the capabilities of the hardware, this
+  structure should also be declared dynamically.
+- Implement all functions in your `<device>_dops` structure,
+  according to prototypes listed in  `cdrom.h`, and specifications given
+  in cdrom_api_. Most likely you have already implemented
+  the code in a large part, and you will almost certainly need to adapt the
+  prototype and return values.
+- Rename your `<device>_ioctl()` function to *audio_ioctl* and
+  change the prototype a little. Remove entries listed in the first
+  part in cdrom_ioctl_, if your code was OK, these are
+  just calls to the routines you adapted in the previous step.
+- You may remove all remaining memory checking code in the
+  *audio_ioctl()* function that deals with audio commands (these are
+  listed in the second part of cdrom_ioctl_. There is no
+  need for memory allocation either, so most *case*s in the *switch*
+  statement look similar to::
+
+	case CDROMREADTOCENTRY:
+		get_toc_entry\bigl((struct cdrom_tocentry *) arg);
+
+- All remaining *ioctl* cases must be moved to a separate
+  function, *<device>_ioctl*, the device-dependent *ioctl()'s*. Note that
+  memory checking and allocation must be kept in this code!
+- Change the prototypes of *<device>_open()* and
+  *<device>_release()*, and remove any strategic code (i. e., tray
+  movement, door locking, etc.).
+- Try to recompile the drivers. We advise you to use modules, both
+  for `cdrom.o` and your driver, as debugging is much easier this
+  way.
+
+Thanks
+======
+
+Thanks to all the people involved. First, Erik Andersen, who has
+taken over the torch in maintaining `cdrom.c` and integrating much
+CD-ROM-related code in the 2.1-kernel. Thanks to Scott Snyder and
+Gerd Knorr, who were the first to implement this interface for SCSI
+and IDE-CD drivers and added many ideas for extension of the data
+structures relative to kernel~2.0. Further thanks to Heiko Eißfeldt,
+Thomas Quinot, Jon Tombs, Ken Pizzini, Eberhard Mönkeberg and Andrew Kroll,
+the Linux CD-ROM device driver developers who were kind
+enough to give suggestions and criticisms during the writing. Finally
+of course, I want to thank Linus Torvalds for making this possible in
+the first place.
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index 933268b8d6a5..5d1e0a4a7d84 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -7,7 +7,7 @@
    License.  See linux/COPYING for more information.
 
    Uniform CD-ROM driver for Linux.
-   See Documentation/cdrom/cdrom-standard.tex for usage information.
+   See Documentation/cdrom/cdrom-standard.txt for usage information.
 
    The routines in the file provide a uniform interface between the
    software that uses CD-ROMs and the various low-level drivers that
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 07/79] docs: cdrom: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (5 preceding siblings ...)
  2019-04-22 13:26   ` [PATCH v2 06/79] docs: cdrom-standard.tex: convert from LaTeX to ReST Mauro Carvalho Chehab
@ 2019-04-22 13:26   ` Mauro Carvalho Chehab
  2019-04-22 13:26   ` [PATCH v2 08/79] docs: cgroup-v1: " Mauro Carvalho Chehab
                     ` (70 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:26 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Jens Axboe, Borislav Petkov, David S. Miller,
	linux-ide, linux-block

The stuff there is almost already at ReST format. A
conversion for them is trivial: just add a missing titles
and fix some scape codes for them to match ReST syntax.

While here, rename the cdrom-standard.txt, with was converted
from LaTeX to ReST on the previous patch, and add it to the
index file.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 ...{cdrom-standard.txt => cdrom-standard.rst} |   0
 Documentation/cdrom/{ide-cd => ide-cd.rst}    | 178 +++++++++---------
 Documentation/cdrom/index.rst                 |  19 ++
 ...{packet-writing.txt => packet-writing.rst} |  27 ++-
 MAINTAINERS                                   |   2 +-
 drivers/block/Kconfig                         |   2 +-
 drivers/cdrom/cdrom.c                         |   2 +-
 drivers/ide/ide-cd.c                          |   2 +-
 8 files changed, 131 insertions(+), 101 deletions(-)
 rename Documentation/cdrom/{cdrom-standard.txt => cdrom-standard.rst} (100%)
 rename Documentation/cdrom/{ide-cd => ide-cd.rst} (84%)
 create mode 100644 Documentation/cdrom/index.rst
 rename Documentation/cdrom/{packet-writing.txt => packet-writing.rst} (91%)

diff --git a/Documentation/cdrom/cdrom-standard.txt b/Documentation/cdrom/cdrom-standard.rst
similarity index 100%
rename from Documentation/cdrom/cdrom-standard.txt
rename to Documentation/cdrom/cdrom-standard.rst
diff --git a/Documentation/cdrom/ide-cd b/Documentation/cdrom/ide-cd.rst
similarity index 84%
rename from Documentation/cdrom/ide-cd
rename to Documentation/cdrom/ide-cd.rst
index a5f2a7f1ff46..dadc94ef6b6c 100644
--- a/Documentation/cdrom/ide-cd
+++ b/Documentation/cdrom/ide-cd.rst
@@ -1,18 +1,20 @@
 IDE-CD driver documentation
-Originally by scott snyder  <snyder@fnald0.fnal.gov> (19 May 1996)
-Carrying on the torch is: Erik Andersen <andersee@debian.org>
-New maintainers (19 Oct 1998): Jens Axboe <axboe@image.dk>
+===========================
+
+:Originally by: scott snyder  <snyder@fnald0.fnal.gov> (19 May 1996)
+:Carrying on the torch is: Erik Andersen <andersee@debian.org>
+:New maintainers (19 Oct 1998): Jens Axboe <axboe@image.dk>
 
 1. Introduction
 ---------------
 
-The ide-cd driver should work with all ATAPI ver 1.2 to ATAPI 2.6 compliant 
+The ide-cd driver should work with all ATAPI ver 1.2 to ATAPI 2.6 compliant
 CDROM drives which attach to an IDE interface.  Note that some CDROM vendors
 (including Mitsumi, Sony, Creative, Aztech, and Goldstar) have made
 both ATAPI-compliant drives and drives which use a proprietary
 interface.  If your drive uses one of those proprietary interfaces,
 this driver will not work with it (but one of the other CDROM drivers
-probably will).  This driver will not work with `ATAPI' drives which
+probably will).  This driver will not work with `ATAPI` drives which
 attach to the parallel port.  In addition, there is at least one drive
 (CyCDROM CR520ie) which attaches to the IDE port but is not ATAPI;
 this driver will not work with drives like that either (but see the
@@ -31,7 +33,7 @@ This driver provides the following features:
    from audio tracks.  The program cdda2wav can be used for this.
    Note, however, that only some drives actually support this.
 
- - There is now support for CDROM changers which comply with the 
+ - There is now support for CDROM changers which comply with the
    ATAPI 2.6 draft standard (such as the NEC CDR-251).  This additional
    functionality includes a function call to query which slot is the
    currently selected slot, a function call to query which slots contain
@@ -49,11 +51,11 @@ This driver provides the following features:
    driver.
 
 1. Make sure that the ide and ide-cd drivers are compiled into the
-   kernel you're using.  When configuring the kernel, in the section 
-   entitled "Floppy, IDE, and other block devices", say either `Y' 
-   (which will compile the support directly into the kernel) or `M'
+   kernel you're using.  When configuring the kernel, in the section
+   entitled "Floppy, IDE, and other block devices", say either `Y`
+   (which will compile the support directly into the kernel) or `M`
    (to compile support as a module which can be loaded and unloaded)
-   to the options: 
+   to the options::
 
       ATA/ATAPI/MFM/RLL support
       Include IDE/ATAPI CDROM support
@@ -72,35 +74,35 @@ This driver provides the following features:
    address and an IRQ number, the standard assignments being
    0x1f0 and 14 for the primary interface and 0x170 and 15 for the
    secondary interface.  Each interface can control up to two devices,
-   where each device can be a hard drive, a CDROM drive, a floppy drive, 
-   or a tape drive.  The two devices on an interface are called `master'
-   and `slave'; this is usually selectable via a jumper on the drive.
+   where each device can be a hard drive, a CDROM drive, a floppy drive,
+   or a tape drive.  The two devices on an interface are called `master`
+   and `slave`; this is usually selectable via a jumper on the drive.
 
    Linux names these devices as follows.  The master and slave devices
-   on the primary IDE interface are called `hda' and `hdb',
+   on the primary IDE interface are called `hda` and `hdb`,
    respectively.  The drives on the secondary interface are called
-   `hdc' and `hdd'.  (Interfaces at other locations get other letters
+   `hdc` and `hdd`.  (Interfaces at other locations get other letters
    in the third position; see Documentation/ide/ide.txt.)
 
    If you want your CDROM drive to be found automatically by the
    driver, you should make sure your IDE interface uses either the
    primary or secondary addresses mentioned above.  In addition, if
    the CDROM drive is the only device on the IDE interface, it should
-   be jumpered as `master'.  (If for some reason you cannot configure
+   be jumpered as `master`.  (If for some reason you cannot configure
    your system in this manner, you can probably still use the driver.
    You may have to pass extra configuration information to the kernel
    when you boot, however.  See Documentation/ide/ide.txt for more
    information.)
 
 4. Boot the system.  If the drive is recognized, you should see a
-   message which looks like
+   message which looks like::
 
      hdb: NEC CD-ROM DRIVE:260, ATAPI CDROM drive
 
    If you do not see this, see section 5 below.
 
 5. You may want to create a symbolic link /dev/cdrom pointing to the
-   actual device.  You can do this with the command
+   actual device.  You can do this with the command::
 
      ln -s  /dev/hdX  /dev/cdrom
 
@@ -108,14 +110,14 @@ This driver provides the following features:
    drive is installed.
 
 6. You should be able to see any error messages from the driver with
-   the `dmesg' command.
+   the `dmesg` command.
 
 
 3. Basic usage
 --------------
 
-An ISO 9660 CDROM can be mounted by putting the disc in the drive and 
-typing (as root)
+An ISO 9660 CDROM can be mounted by putting the disc in the drive and
+typing (as root)::
 
   mount -t iso9660 /dev/cdrom /mnt/cdrom
 
@@ -123,7 +125,7 @@ where it is assumed that /dev/cdrom is a link pointing to the actual
 device (as described in step 5 of the last section) and /mnt/cdrom is
 an empty directory.  You should now be able to see the contents of the
 CDROM under the /mnt/cdrom directory.  If you want to eject the CDROM,
-you must first dismount it with a command like
+you must first dismount it with a command like::
 
   umount /mnt/cdrom
 
@@ -148,7 +150,7 @@ such as cdda2wav.  The only types of drive which I've heard support
 this are Sony and Toshiba drives.  You will get errors if you try to
 use this function on a drive which does not support it.
 
-For supported changers, you can use the `cdchange' program (appended to
+For supported changers, you can use the `cdchange` program (appended to
 the end of this file) to switch between changer slots.  Note that the
 drive should be unmounted before attempting this.  The program takes
 two arguments:  the CDROM device, and the slot number to which you wish
@@ -165,7 +167,7 @@ Documentation/ide/ide.txt for current information about the underlying
 IDE support code.  Some of these items apply only to earlier versions
 of the driver, but are mentioned here for completeness.
 
-In most cases, you should probably check with `dmesg' for any errors
+In most cases, you should probably check with `dmesg` for any errors
 from the driver.
 
 a. Drive is not detected during booting.
@@ -184,9 +186,9 @@ a. Drive is not detected during booting.
 
    - If the autoprobing is not finding your drive, you can tell the
      driver to assume that one exists by using a lilo option of the
-     form `hdX=cdrom', where X is the drive letter corresponding to
-     where your drive is installed.  Note that if you do this and you 
-     see a boot message like
+     form `hdX=cdrom`, where X is the drive letter corresponding to
+     where your drive is installed.  Note that if you do this and you
+     see a boot message like::
 
        hdX: ATAPI cdrom (?)
 
@@ -220,7 +222,7 @@ b. Timeout/IRQ errors.
     probably not making it to the host.
 
   - IRQ problems may also be indicated by the message
-    `IRQ probe failed (<n>)' while booting.  If <n> is zero, that
+    `IRQ probe failed (<n>)` while booting.  If <n> is zero, that
     means that the system did not see an interrupt from the drive when
     it was expecting one (on any feasible IRQ).  If <n> is negative,
     that means the system saw interrupts on multiple IRQ lines, when
@@ -240,27 +242,27 @@ b. Timeout/IRQ errors.
     there are hardware problems with the interrupt setup; they
     apparently don't use interrupts.
 
-  - If you own a Pioneer DR-A24X, you _will_ get nasty error messages 
+  - If you own a Pioneer DR-A24X, you _will_ get nasty error messages
     on boot such as "irq timeout: status=0x50 { DriveReady SeekComplete }"
     The Pioneer DR-A24X CDROM drives are fairly popular these days.
     Unfortunately, these drives seem to become very confused when we perform
     the standard Linux ATA disk drive probe. If you own one of these drives,
-    you can bypass the ATA probing which confuses these CDROM drives, by 
-    adding `append="hdX=noprobe hdX=cdrom"' to your lilo.conf file and running 
-    lilo (again where X is the drive letter corresponding to where your drive 
+    you can bypass the ATA probing which confuses these CDROM drives, by
+    adding `append="hdX=noprobe hdX=cdrom"` to your lilo.conf file and running
+    lilo (again where X is the drive letter corresponding to where your drive
     is installed.)
-    
+
 c. System hangups.
 
   - If the system locks up when you try to access the CDROM, the most
     likely cause is that you have a buggy IDE adapter which doesn't
     properly handle simultaneous transactions on multiple interfaces.
     The most notorious of these is the CMD640B chip.  This problem can
-    be worked around by specifying the `serialize' option when
+    be worked around by specifying the `serialize` option when
     booting.  Recent kernels should be able to detect the need for
     this automatically in most cases, but the detection is not
     foolproof.  See Documentation/ide/ide.txt for more information
-    about the `serialize' option and the CMD640B.
+    about the `serialize` option and the CMD640B.
 
   - Note that many MS-DOS CDROM drivers will work with such buggy
     hardware, apparently because they never attempt to overlap CDROM
@@ -269,14 +271,14 @@ c. System hangups.
 
 d. Can't mount a CDROM.
 
-  - If you get errors from mount, it may help to check `dmesg' to see
+  - If you get errors from mount, it may help to check `dmesg` to see
     if there are any more specific errors from the driver or from the
     filesystem.
 
   - Make sure there's a CDROM loaded in the drive, and that's it's an
     ISO 9660 disc.  You can't mount an audio CD.
 
-  - With the CDROM in the drive and unmounted, try something like
+  - With the CDROM in the drive and unmounted, try something like::
 
       cat /dev/cdrom | od | more
 
@@ -284,9 +286,9 @@ d. Can't mount a CDROM.
     OK, and the problem is at the filesystem level (i.e., the CDROM is
     not ISO 9660 or has errors in the filesystem structure).
 
-  - If you see `not a block device' errors, check that the definitions
+  - If you see `not a block device` errors, check that the definitions
     of the device special files are correct.  They should be as
-    follows:
+    follows::
 
       brw-rw----   1 root     disk       3,   0 Nov 11 18:48 /dev/hda
       brw-rw----   1 root     disk       3,  64 Nov 11 18:48 /dev/hdb
@@ -301,7 +303,7 @@ d. Can't mount a CDROM.
     If you have a /dev/cdrom symbolic link, check that it is pointing
     to the correct device file.
 
-    If you hear people talking of the devices `hd1a' and `hd1b', these
+    If you hear people talking of the devices `hd1a` and `hd1b`, these
     were old names for what are now called hdc and hdd.  Those names
     should be considered obsolete.
 
@@ -311,8 +313,8 @@ d. Can't mount a CDROM.
     always give meaningful error messages.
 
 
-e. Directory listings are unpredictably truncated, and `dmesg' shows
-   `buffer botch' error messages from the driver.
+e. Directory listings are unpredictably truncated, and `dmesg` shows
+   `buffer botch` error messages from the driver.
 
   - There was a bug in the version of the driver in 1.2.x kernels
     which could cause this.  It was fixed in 1.3.0.  If you can't
@@ -335,34 +337,36 @@ f. Data corruption.
 5. cdchange.c
 -------------
 
-/*
- * cdchange.c  [-v]  <device>  [<slot>]
- *
- * This loads a CDROM from a specified slot in a changer, and displays 
- * information about the changer status.  The drive should be unmounted before 
- * using this program.
- *
- * Changer information is displayed if either the -v flag is specified
- * or no slot was specified.
- *
- * Based on code originally from Gerhard Zuber <zuber@berlin.snafu.de>.
- * Changer status information, and rewrite for the new Uniform CDROM driver
- * interface by Erik Andersen <andersee@debian.org>.
- */
+::
 
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <string.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/ioctl.h>
-#include <linux/cdrom.h>
+  /*
+   * cdchange.c  [-v]  <device>  [<slot>]
+   *
+   * This loads a CDROM from a specified slot in a changer, and displays
+   * information about the changer status.  The drive should be unmounted before
+   * using this program.
+   *
+   * Changer information is displayed if either the -v flag is specified
+   * or no slot was specified.
+   *
+   * Based on code originally from Gerhard Zuber <zuber@berlin.snafu.de>.
+   * Changer status information, and rewrite for the new Uniform CDROM driver
+   * interface by Erik Andersen <andersee@debian.org>.
+   */
 
+  #include <stdio.h>
+  #include <stdlib.h>
+  #include <errno.h>
+  #include <string.h>
+  #include <unistd.h>
+  #include <fcntl.h>
+  #include <sys/ioctl.h>
+  #include <linux/cdrom.h>
 
-int
-main (int argc, char **argv)
-{
+
+  int
+  main (int argc, char **argv)
+  {
 	char *program;
 	char *device;
 	int fd;           /* file descriptor for CD-ROM device */
@@ -382,30 +386,30 @@ main (int argc, char **argv)
 		fprintf (stderr, "       Slots are numbered 1 -- n.\n");
 		exit (1);
 	}
- 
+
        if (strcmp (argv[0], "-v") == 0) {
                 verbose = 1;
                 ++argv;
                 --argc;
         }
- 
+
 	device = argv[0];
- 
+
 	if (argc == 2)
 		slot = atoi (argv[1]) - 1;
 
-	/* open device */ 
+	/* open device */
 	fd = open(device, O_RDONLY | O_NONBLOCK);
 	if (fd < 0) {
-		fprintf (stderr, "%s: open failed for `%s': %s\n",
+		fprintf (stderr, "%s: open failed for `%s`: %s\n",
 			 program, device, strerror (errno));
 		exit (1);
 	}
 
-	/* Check CD player status */ 
+	/* Check CD player status */
 	total_slots_available = ioctl (fd, CDROM_CHANGER_NSLOTS);
 	if (total_slots_available <= 1 ) {
-		fprintf (stderr, "%s: Device `%s' is not an ATAPI "
+		fprintf (stderr, "%s: Device `%s` is not an ATAPI "
 			"compliant CD changer.\n", program, device);
 		exit (1);
 	}
@@ -418,7 +422,7 @@ main (int argc, char **argv)
 			exit (1);
 		}
 
-		/* load */ 
+		/* load */
 		slot=ioctl (fd, CDROM_SELECT_DISC, slot);
 		if (slot<0) {
 			fflush(stdout);
@@ -462,14 +466,14 @@ main (int argc, char **argv)
 
 		for (x_slot=0; x_slot<total_slots_available; x_slot++) {
 			printf ("Slot %2d: ", x_slot+1);
-             		status = ioctl (fd, CDROM_DRIVE_STATUS, x_slot);
-             		if (status<0) {
-             		     perror(" CDROM_DRIVE_STATUS");
-             		} else switch(status) {
+			status = ioctl (fd, CDROM_DRIVE_STATUS, x_slot);
+			if (status<0) {
+			     perror(" CDROM_DRIVE_STATUS");
+			} else switch(status) {
 			case CDS_DISC_OK:
 				printf ("Disc present.");
 				break;
-			case CDS_NO_DISC: 
+			case CDS_NO_DISC:
 				printf ("Empty slot.");
 				break;
 			case CDS_TRAY_OPEN:
@@ -507,11 +511,11 @@ main (int argc, char **argv)
 				break;
 			}
 			}
-                  	status = ioctl (fd, CDROM_MEDIA_CHANGED, x_slot);
-                  	if (status<0) {
+			status = ioctl (fd, CDROM_MEDIA_CHANGED, x_slot);
+			if (status<0) {
 				perror(" CDROM_MEDIA_CHANGED");
-                  	}
-		  	switch (status) {
+			}
+			switch (status) {
 			case 1:
 				printf ("Changed.\n");
 				break;
@@ -525,10 +529,10 @@ main (int argc, char **argv)
 	/* close device */
 	status = close (fd);
 	if (status != 0) {
-		fprintf (stderr, "%s: close failed for `%s': %s\n",
+		fprintf (stderr, "%s: close failed for `%s`: %s\n",
 			 program, device, strerror (errno));
 		exit (1);
 	}
- 
+
 	exit (0);
-}
+  }
diff --git a/Documentation/cdrom/index.rst b/Documentation/cdrom/index.rst
new file mode 100644
index 000000000000..efbd5d111825
--- /dev/null
+++ b/Documentation/cdrom/index.rst
@@ -0,0 +1,19 @@
+:orphan:
+
+=====
+cdrom
+=====
+
+.. toctree::
+    :maxdepth: 1
+
+    cdrom-standard
+    ide-cd
+    packet-writing
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/cdrom/packet-writing.txt b/Documentation/cdrom/packet-writing.rst
similarity index 91%
rename from Documentation/cdrom/packet-writing.txt
rename to Documentation/cdrom/packet-writing.rst
index 2834170d821e..c5c957195a5a 100644
--- a/Documentation/cdrom/packet-writing.txt
+++ b/Documentation/cdrom/packet-writing.rst
@@ -1,3 +1,7 @@
+==============
+Packet writing
+==============
+
 Getting started quick
 ---------------------
 
@@ -10,13 +14,16 @@ Getting started quick
   Download from http://sourceforge.net/projects/linux-udf/
 
 - Grab a new CD-RW disc and format it (assuming CD-RW is hdc, substitute
-  as appropriate):
+  as appropriate)::
+
 	# cdrwtool -d /dev/hdc -q
 
-- Setup your writer
+- Setup your writer::
+
 	# pktsetup dev_name /dev/hdc
 
-- Now you can mount /dev/pktcdvd/dev_name and copy files to it. Enjoy!
+- Now you can mount /dev/pktcdvd/dev_name and copy files to it. Enjoy::
+
 	# mount /dev/pktcdvd/dev_name /cdrom -t udf -o rw,noatime
 
 
@@ -25,11 +32,11 @@ Packet writing for DVD-RW media
 
 DVD-RW discs can be written to much like CD-RW discs if they are in
 the so called "restricted overwrite" mode. To put a disc in restricted
-overwrite mode, run:
+overwrite mode, run::
 
 	# dvd+rw-format /dev/hdc
 
-You can then use the disc the same way you would use a CD-RW disc:
+You can then use the disc the same way you would use a CD-RW disc::
 
 	# pktsetup dev_name /dev/hdc
 	# mount /dev/pktcdvd/dev_name /cdrom -t udf -o rw,noatime
@@ -41,7 +48,7 @@ Packet writing for DVD+RW media
 According to the DVD+RW specification, a drive supporting DVD+RW discs
 shall implement "true random writes with 2KB granularity", which means
 that it should be possible to put any filesystem with a block size >=
-2KB on such a disc. For example, it should be possible to do:
+2KB on such a disc. For example, it should be possible to do::
 
 	# dvd+rw-format /dev/hdc   (only needed if the disc has never
 	                            been formatted)
@@ -54,7 +61,7 @@ follow the specification, but suffer bad performance problems if the
 writes are not 32KB aligned.
 
 Both problems can be solved by using the pktcdvd driver, which always
-generates aligned writes.
+generates aligned writes::
 
 	# dvd+rw-format /dev/hdc
 	# pktsetup dev_name /dev/hdc
@@ -83,7 +90,7 @@ Notes
 
 - Since the pktcdvd driver makes the disc appear as a regular block
   device with a 2KB block size, you can put any filesystem you like on
-  the disc. For example, run:
+  the disc. For example, run::
 
 	# /sbin/mke2fs /dev/pktcdvd/dev_name
 
@@ -97,7 +104,7 @@ Since Linux 2.6.20, the pktcdvd module has a sysfs interface
 and can be controlled by it. For example the "pktcdvd" tool uses
 this interface. (see http://tom.ist-im-web.de/download/pktcdvd )
 
-"pktcdvd" works similar to "pktsetup", e.g.:
+"pktcdvd" works similar to "pktsetup", e.g.::
 
 	# pktcdvd -a dev_name /dev/hdc
 	# mkudffs /dev/pktcdvd/dev_name
@@ -115,7 +122,7 @@ For a description of the sysfs interface look into the file:
 Using the pktcdvd debugfs interface
 -----------------------------------
 
-To read pktcdvd device infos in human readable form, do:
+To read pktcdvd device infos in human readable form, do::
 
 	# cat /sys/kernel/debug/pktcdvd/pktcdvd[0-7]/info
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 285c2eee36d1..c8eebc8da565 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7545,7 +7545,7 @@ IDE/ATAPI DRIVERS
 M:	Borislav Petkov <bp@alien8.de>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
-F:	Documentation/cdrom/ide-cd
+F:	Documentation/cdrom/ide-cd.rst
 F:	drivers/ide/ide-cd*
 
 IDEAPAD LAPTOP EXTRAS DRIVER
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 20bb4bfa4be6..96ec7e0fc1ea 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -347,7 +347,7 @@ config CDROM_PKTCDVD
 	  is possible.
 	  DVD-RW disks must be in restricted overwrite mode.
 
-	  See the file <file:Documentation/cdrom/packet-writing.txt>
+	  See the file <file:Documentation/cdrom/packet-writing.rst>
 	  for further information on the use of this driver.
 
 	  To compile this driver as a module, choose M here: the
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index 5d1e0a4a7d84..ac42ae4651ce 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -7,7 +7,7 @@
    License.  See linux/COPYING for more information.
 
    Uniform CD-ROM driver for Linux.
-   See Documentation/cdrom/cdrom-standard.txt for usage information.
+   See Documentation/cdrom/cdrom-standard.rst for usage information.
 
    The routines in the file provide a uniform interface between the
    software that uses CD-ROMs and the various low-level drivers that
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 3b15adc6ce98..9d117936bee1 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -9,7 +9,7 @@
  * May be copied or modified under the terms of the GNU General Public
  * License.  See linux/COPYING for more information.
  *
- * See Documentation/cdrom/ide-cd for usage information.
+ * See Documentation/cdrom/ide-cd.rst for usage information.
  *
  * Suggestions are welcome. Patches that work are more welcome though. ;-)
  *
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 08/79] docs: cgroup-v1: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (6 preceding siblings ...)
  2019-04-22 13:26   ` [PATCH v2 07/79] docs: cdrom: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
@ 2019-04-22 13:26   ` Mauro Carvalho Chehab
  2019-05-06 15:47     ` Tejun Heo
  2019-04-22 13:26   ` [PATCH v2 09/79] docs: cgroup-v1/blkio-controller.rst: add a note about CFQ scheduler Mauro Carvalho Chehab
                     ` (69 subsequent siblings)
  77 siblings, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:26 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Thomas Gleixner, Ingo Molnar, Borislav Petkov,
	H. Peter Anvin, x86, Jens Axboe, Tejun Heo, Li Zefan,
	Johannes Weiner, Alexei Starovoitov, Daniel Borkmann,
	Martin KaFai Lau, Song Liu, Yonghong Song, James Morris,
	Serge E. Hallyn, linux-block, cgroups, netdev, bpf,
	linux-security-module

Convert the cgroup-v1 files to ReST format, in order to
allow a later addition to the admin-guide.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../admin-guide/kernel-parameters.txt         |   4 +-
 Documentation/admin-guide/l1tf.rst            |   2 +-
 .../admin-guide/mm/numa_memory_policy.rst     |   2 +-
 Documentation/block/bfq-iosched.txt           |   2 +-
 ...io-controller.txt => blkio-controller.rst} |  96 ++--
 .../cgroup-v1/{cgroups.txt => cgroups.rst}    | 184 +++----
 .../cgroup-v1/{cpuacct.txt => cpuacct.rst}    |  15 +-
 .../cgroup-v1/{cpusets.txt => cpusets.rst}    | 205 ++++----
 .../cgroup-v1/{devices.txt => devices.rst}    |  40 +-
 ...er-subsystem.txt => freezer-subsystem.rst} |  14 +-
 .../cgroup-v1/{hugetlb.txt => hugetlb.rst}    |  31 +-
 Documentation/cgroup-v1/index.rst             |  30 ++
 .../{memcg_test.txt => memcg_test.rst}        | 261 ++++++----
 .../cgroup-v1/{memory.txt => memory.rst}      | 449 +++++++++++-------
 .../cgroup-v1/{net_cls.txt => net_cls.rst}    |  37 +-
 .../cgroup-v1/{net_prio.txt => net_prio.rst}  |  24 +-
 .../cgroup-v1/{pids.txt => pids.rst}          |  78 +--
 .../cgroup-v1/{rdma.txt => rdma.rst}          |  66 +--
 Documentation/filesystems/tmpfs.txt           |   2 +-
 Documentation/scheduler/sched-deadline.txt    |   2 +-
 Documentation/scheduler/sched-design-CFS.txt  |   2 +-
 Documentation/scheduler/sched-rt-group.txt    |   2 +-
 Documentation/vm/numa.rst                     |   4 +-
 Documentation/vm/page_migration.rst           |   2 +-
 Documentation/vm/unevictable-lru.rst          |   2 +-
 .../x86/x86_64/fake-numa-for-cpusets          |   4 +-
 MAINTAINERS                                   |   2 +-
 block/Kconfig                                 |   2 +-
 include/linux/cgroup-defs.h                   |   2 +-
 include/uapi/linux/bpf.h                      |   2 +-
 init/Kconfig                                  |   2 +-
 kernel/cgroup/cpuset.c                        |   2 +-
 security/device_cgroup.c                      |   2 +-
 tools/include/uapi/linux/bpf.h                |   2 +-
 34 files changed, 947 insertions(+), 629 deletions(-)
 rename Documentation/cgroup-v1/{blkio-controller.txt => blkio-controller.rst} (90%)
 rename Documentation/cgroup-v1/{cgroups.txt => cgroups.rst} (88%)
 rename Documentation/cgroup-v1/{cpuacct.txt => cpuacct.rst} (90%)
 rename Documentation/cgroup-v1/{cpusets.txt => cpusets.rst} (90%)
 rename Documentation/cgroup-v1/{devices.txt => devices.rst} (88%)
 rename Documentation/cgroup-v1/{freezer-subsystem.txt => freezer-subsystem.rst} (95%)
 rename Documentation/cgroup-v1/{hugetlb.txt => hugetlb.rst} (74%)
 create mode 100644 Documentation/cgroup-v1/index.rst
 rename Documentation/cgroup-v1/{memcg_test.txt => memcg_test.rst} (62%)
 rename Documentation/cgroup-v1/{memory.txt => memory.rst} (71%)
 rename Documentation/cgroup-v1/{net_cls.txt => net_cls.rst} (50%)
 rename Documentation/cgroup-v1/{net_prio.txt => net_prio.rst} (71%)
 rename Documentation/cgroup-v1/{pids.txt => pids.rst} (62%)
 rename Documentation/cgroup-v1/{rdma.txt => rdma.rst} (79%)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 308af3b62f8d..0376e7e7dfa3 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4010,7 +4010,7 @@
 
 	relax_domain_level=
 			[KNL, SMP] Set scheduler's default relax_domain_level.
-			See Documentation/cgroup-v1/cpusets.txt.
+			See Documentation/cgroup-v1/cpusets.rst.
 
 	reserve=	[KNL,BUGS] Force kernel to ignore I/O ports or memory
 			Format: <base1>,<size1>[,<base2>,<size2>,...]
@@ -4520,7 +4520,7 @@
 	swapaccount=[0|1]
 			[KNL] Enable accounting of swap in memory resource
 			controller if no parameter or 1 is given or disable
-			it if 0 is given (See Documentation/cgroup-v1/memory.txt)
+			it if 0 is given (See Documentation/cgroup-v1/memory.rst)
 
 	swiotlb=	[ARM,IA-64,PPC,MIPS,X86]
 			Format: { <int> | force | noforce }
diff --git a/Documentation/admin-guide/l1tf.rst b/Documentation/admin-guide/l1tf.rst
index 9af977384168..f5b2a54a0dc2 100644
--- a/Documentation/admin-guide/l1tf.rst
+++ b/Documentation/admin-guide/l1tf.rst
@@ -241,7 +241,7 @@ Guest mitigation mechanisms
    For further information about confining guests to a single or to a group
    of cores consult the cpusets documentation:
 
-   https://www.kernel.org/doc/Documentation/cgroup-v1/cpusets.txt
+   https://www.kernel.org/doc/Documentation/cgroup-v1/cpusets.rst
 
 .. _interrupt_isolation:
 
diff --git a/Documentation/admin-guide/mm/numa_memory_policy.rst b/Documentation/admin-guide/mm/numa_memory_policy.rst
index d78c5b315f72..546f174e5d6a 100644
--- a/Documentation/admin-guide/mm/numa_memory_policy.rst
+++ b/Documentation/admin-guide/mm/numa_memory_policy.rst
@@ -15,7 +15,7 @@ document attempts to describe the concepts and APIs of the 2.6 memory policy
 support.
 
 Memory policies should not be confused with cpusets
-(``Documentation/cgroup-v1/cpusets.txt``)
+(``Documentation/cgroup-v1/cpusets.rst``)
 which is an administrative mechanism for restricting the nodes from which
 memory may be allocated by a set of processes. Memory policies are a
 programming interface that a NUMA-aware application can take advantage of.  When
diff --git a/Documentation/block/bfq-iosched.txt b/Documentation/block/bfq-iosched.txt
index 1a0f2ac02eb6..b2265cf6c9c3 100644
--- a/Documentation/block/bfq-iosched.txt
+++ b/Documentation/block/bfq-iosched.txt
@@ -539,7 +539,7 @@ As for cgroups-v1 (blkio controller), the exact set of stat files
 created, and kept up-to-date by bfq, depends on whether
 CONFIG_DEBUG_BLK_CGROUP is set. If it is set, then bfq creates all
 the stat files documented in
-Documentation/cgroup-v1/blkio-controller.txt. If, instead,
+Documentation/cgroup-v1/blkio-controller.rst. If, instead,
 CONFIG_DEBUG_BLK_CGROUP is not set, then bfq creates only the files
 blkio.bfq.io_service_bytes
 blkio.bfq.io_service_bytes_recursive
diff --git a/Documentation/cgroup-v1/blkio-controller.txt b/Documentation/cgroup-v1/blkio-controller.rst
similarity index 90%
rename from Documentation/cgroup-v1/blkio-controller.txt
rename to Documentation/cgroup-v1/blkio-controller.rst
index 673dc34d3f78..2c1b907afc14 100644
--- a/Documentation/cgroup-v1/blkio-controller.txt
+++ b/Documentation/cgroup-v1/blkio-controller.rst
@@ -1,5 +1,7 @@
-				Block IO Controller
-				===================
+===================
+Block IO Controller
+===================
+
 Overview
 ========
 cgroup subsys "blkio" implements the block io controller. There seems to be
@@ -22,28 +24,35 @@ Proportional Weight division of bandwidth
 You can do a very simple testing of running two dd threads in two different
 cgroups. Here is what you can do.
 
-- Enable Block IO controller
+- Enable Block IO controller::
+
 	CONFIG_BLK_CGROUP=y
 
-- Enable group scheduling in CFQ
+- Enable group scheduling in CFQ:
+
+
 	CONFIG_CFQ_GROUP_IOSCHED=y
 
 - Compile and boot into kernel and mount IO controller (blkio); see
   cgroups.txt, Why are cgroups needed?.
 
+  ::
+
 	mount -t tmpfs cgroup_root /sys/fs/cgroup
 	mkdir /sys/fs/cgroup/blkio
 	mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
 
-- Create two cgroups
+- Create two cgroups::
+
 	mkdir -p /sys/fs/cgroup/blkio/test1/ /sys/fs/cgroup/blkio/test2
 
-- Set weights of group test1 and test2
+- Set weights of group test1 and test2::
+
 	echo 1000 > /sys/fs/cgroup/blkio/test1/blkio.weight
 	echo 500 > /sys/fs/cgroup/blkio/test2/blkio.weight
 
 - Create two same size files (say 512MB each) on same disk (file1, file2) and
-  launch two dd threads in different cgroup to read those files.
+  launch two dd threads in different cgroup to read those files::
 
 	sync
 	echo 3 > /proc/sys/vm/drop_caches
@@ -65,24 +74,27 @@ cgroups. Here is what you can do.
 
 Throttling/Upper Limit policy
 -----------------------------
-- Enable Block IO controller
+- Enable Block IO controller::
+
 	CONFIG_BLK_CGROUP=y
 
-- Enable throttling in block layer
+- Enable throttling in block layer::
+
 	CONFIG_BLK_DEV_THROTTLING=y
 
-- Mount blkio controller (see cgroups.txt, Why are cgroups needed?)
+- Mount blkio controller (see cgroups.txt, Why are cgroups needed?)::
+
         mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
 
 - Specify a bandwidth rate on particular device for root group. The format
-  for policy is "<major>:<minor>  <bytes_per_second>".
+  for policy is "<major>:<minor>  <bytes_per_second>"::
 
         echo "8:16  1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device
 
   Above will put a limit of 1MB/second on reads happening for root group
   on device having major/minor number 8:16.
 
-- Run dd to read a file and see if rate is throttled to 1MB/s or not.
+- Run dd to read a file and see if rate is throttled to 1MB/s or not::
 
         # dd iflag=direct if=/mnt/common/zerofile of=/dev/null bs=4K count=1024
         1024+0 records in
@@ -99,7 +111,7 @@ throttling's hierarchy support is enabled iff "sane_behavior" is
 enabled from cgroup side, which currently is a development option and
 not publicly available.
 
-If somebody created a hierarchy like as follows.
+If somebody created a hierarchy like as follows::
 
 			root
 			/  \
@@ -115,7 +127,7 @@ directly generated by tasks in that cgroup.
 
 Throttling without "sane_behavior" enabled from cgroup side will
 practically treat all groups at same level as if it looks like the
-following.
+following::
 
 				pivot
 			     /  /   \  \
@@ -152,27 +164,31 @@ Proportional weight policy files
 	  These rules override the default value of group weight as specified
 	  by blkio.weight.
 
-	  Following is the format.
+	  Following is the format::
 
-	  # echo dev_maj:dev_minor weight > blkio.weight_device
-	  Configure weight=300 on /dev/sdb (8:16) in this cgroup
-	  # echo 8:16 300 > blkio.weight_device
-	  # cat blkio.weight_device
-	  dev     weight
-	  8:16    300
+	    # echo dev_maj:dev_minor weight > blkio.weight_device
 
-	  Configure weight=500 on /dev/sda (8:0) in this cgroup
-	  # echo 8:0 500 > blkio.weight_device
-	  # cat blkio.weight_device
-	  dev     weight
-	  8:0     500
-	  8:16    300
+	  Configure weight=300 on /dev/sdb (8:16) in this cgroup::
 
-	  Remove specific weight for /dev/sda in this cgroup
-	  # echo 8:0 0 > blkio.weight_device
-	  # cat blkio.weight_device
-	  dev     weight
-	  8:16    300
+	    # echo 8:16 300 > blkio.weight_device
+	    # cat blkio.weight_device
+	    dev     weight
+	    8:16    300
+
+	  Configure weight=500 on /dev/sda (8:0) in this cgroup::
+
+	    # echo 8:0 500 > blkio.weight_device
+	    # cat blkio.weight_device
+	    dev     weight
+	    8:0     500
+	    8:16    300
+
+	  Remove specific weight for /dev/sda in this cgroup::
+
+	    # echo 8:0 0 > blkio.weight_device
+	    # cat blkio.weight_device
+	    dev     weight
+	    8:16    300
 
 - blkio.leaf_weight[_device]
 	- Equivalents of blkio.weight[_device] for the purpose of
@@ -297,30 +313,30 @@ Throttling/Upper limit policy files
 - blkio.throttle.read_bps_device
 	- Specifies upper limit on READ rate from the device. IO rate is
 	  specified in bytes per second. Rules are per device. Following is
-	  the format.
+	  the format::
 
-  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.read_bps_device
+	    echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.read_bps_device
 
 - blkio.throttle.write_bps_device
 	- Specifies upper limit on WRITE rate to the device. IO rate is
 	  specified in bytes per second. Rules are per device. Following is
-	  the format.
+	  the format::
 
-  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.write_bps_device
+	    echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.write_bps_device
 
 - blkio.throttle.read_iops_device
 	- Specifies upper limit on READ rate from the device. IO rate is
 	  specified in IO per second. Rules are per device. Following is
-	  the format.
+	  the format::
 
-  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.read_iops_device
+	   echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.read_iops_device
 
 - blkio.throttle.write_iops_device
 	- Specifies upper limit on WRITE rate to the device. IO rate is
 	  specified in io per second. Rules are per device. Following is
-	  the format.
+	  the format::
 
-  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.write_iops_device
+	    echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.write_iops_device
 
 Note: If both BW and IOPS rules are specified for a device, then IO is
       subjected to both the constraints.
diff --git a/Documentation/cgroup-v1/cgroups.txt b/Documentation/cgroup-v1/cgroups.rst
similarity index 88%
rename from Documentation/cgroup-v1/cgroups.txt
rename to Documentation/cgroup-v1/cgroups.rst
index 059f7063eea6..46bbe7e022d4 100644
--- a/Documentation/cgroup-v1/cgroups.txt
+++ b/Documentation/cgroup-v1/cgroups.rst
@@ -1,35 +1,39 @@
-				CGROUPS
-				-------
+==============
+Control Groups
+==============
 
 Written by Paul Menage <menage@google.com> based on
-Documentation/cgroup-v1/cpusets.txt
+Documentation/cgroup-v1/cpusets.rst
 
 Original copyright statements from cpusets.txt:
+
 Portions Copyright (C) 2004 BULL SA.
+
 Portions Copyright (c) 2004-2006 Silicon Graphics, Inc.
+
 Modified by Paul Jackson <pj@sgi.com>
+
 Modified by Christoph Lameter <cl@linux.com>
 
-CONTENTS:
-=========
+.. CONTENTS:
 
-1. Control Groups
-  1.1 What are cgroups ?
-  1.2 Why are cgroups needed ?
-  1.3 How are cgroups implemented ?
-  1.4 What does notify_on_release do ?
-  1.5 What does clone_children do ?
-  1.6 How do I use cgroups ?
-2. Usage Examples and Syntax
-  2.1 Basic Usage
-  2.2 Attaching processes
-  2.3 Mounting hierarchies by name
-3. Kernel API
-  3.1 Overview
-  3.2 Synchronization
-  3.3 Subsystem API
-4. Extended attributes usage
-5. Questions
+	1. Control Groups
+	1.1 What are cgroups ?
+	1.2 Why are cgroups needed ?
+	1.3 How are cgroups implemented ?
+	1.4 What does notify_on_release do ?
+	1.5 What does clone_children do ?
+	1.6 How do I use cgroups ?
+	2. Usage Examples and Syntax
+	2.1 Basic Usage
+	2.2 Attaching processes
+	2.3 Mounting hierarchies by name
+	3. Kernel API
+	3.1 Overview
+	3.2 Synchronization
+	3.3 Subsystem API
+	4. Extended attributes usage
+	5. Questions
 
 1. Control Groups
 =================
@@ -72,7 +76,7 @@ On their own, the only use for cgroups is for simple job
 tracking. The intention is that other subsystems hook into the generic
 cgroup support to provide new attributes for cgroups, such as
 accounting/limiting the resources which processes in a cgroup can
-access. For example, cpusets (see Documentation/cgroup-v1/cpusets.txt) allow
+access. For example, cpusets (see Documentation/cgroup-v1/cpusets.rst) allow
 you to associate a set of CPUs and a set of memory nodes with the
 tasks in each cgroup.
 
@@ -108,7 +112,7 @@ As an example of a scenario (originally proposed by vatsa@in.ibm.com)
 that can benefit from multiple hierarchies, consider a large
 university server with various users - students, professors, system
 tasks etc. The resource planning for this server could be along the
-following lines:
+following lines::
 
        CPU :          "Top cpuset"
                        /       \
@@ -136,7 +140,7 @@ depending on who launched it (prof/student).
 With the ability to classify tasks differently for different resources
 (by putting those resource subsystems in different hierarchies),
 the admin can easily set up a script which receives exec notifications
-and depending on who is launching the browser he can
+and depending on who is launching the browser he can::
 
     # echo browser_pid > /sys/fs/cgroup/<restype>/<userclass>/tasks
 
@@ -151,7 +155,7 @@ wants to do online gaming :))  OR give one of the student's simulation
 apps enhanced CPU power.
 
 With ability to write PIDs directly to resource classes, it's just a
-matter of:
+matter of::
 
        # echo pid > /sys/fs/cgroup/network/<new_class>/tasks
        (after some time)
@@ -306,7 +310,7 @@ configuration from the parent during initialization.
 --------------------------
 
 To start a new job that is to be contained within a cgroup, using
-the "cpuset" cgroup subsystem, the steps are something like:
+the "cpuset" cgroup subsystem, the steps are something like::
 
  1) mount -t tmpfs cgroup_root /sys/fs/cgroup
  2) mkdir /sys/fs/cgroup/cpuset
@@ -320,7 +324,7 @@ the "cpuset" cgroup subsystem, the steps are something like:
 
 For example, the following sequence of commands will setup a cgroup
 named "Charlie", containing just CPUs 2 and 3, and Memory Node 1,
-and then start a subshell 'sh' in that cgroup:
+and then start a subshell 'sh' in that cgroup::
 
   mount -t tmpfs cgroup_root /sys/fs/cgroup
   mkdir /sys/fs/cgroup/cpuset
@@ -345,8 +349,9 @@ and then start a subshell 'sh' in that cgroup:
 Creating, modifying, using cgroups can be done through the cgroup
 virtual filesystem.
 
-To mount a cgroup hierarchy with all available subsystems, type:
-# mount -t cgroup xxx /sys/fs/cgroup
+To mount a cgroup hierarchy with all available subsystems, type::
+
+  # mount -t cgroup xxx /sys/fs/cgroup
 
 The "xxx" is not interpreted by the cgroup code, but will appear in
 /proc/mounts so may be any useful identifying string that you like.
@@ -355,18 +360,19 @@ Note: Some subsystems do not work without some user input first.  For instance,
 if cpusets are enabled the user will have to populate the cpus and mems files
 for each new cgroup created before that group can be used.
 
-As explained in section `1.2 Why are cgroups needed?' you should create
+As explained in section `1.2 Why are cgroups needed?` you should create
 different hierarchies of cgroups for each single resource or group of
 resources you want to control. Therefore, you should mount a tmpfs on
 /sys/fs/cgroup and create directories for each cgroup resource or resource
-group.
+group::
 
-# mount -t tmpfs cgroup_root /sys/fs/cgroup
-# mkdir /sys/fs/cgroup/rg1
+  # mount -t tmpfs cgroup_root /sys/fs/cgroup
+  # mkdir /sys/fs/cgroup/rg1
 
 To mount a cgroup hierarchy with just the cpuset and memory
-subsystems, type:
-# mount -t cgroup -o cpuset,memory hier1 /sys/fs/cgroup/rg1
+subsystems, type::
+
+  # mount -t cgroup -o cpuset,memory hier1 /sys/fs/cgroup/rg1
 
 While remounting cgroups is currently supported, it is not recommend
 to use it. Remounting allows changing bound subsystems and
@@ -375,9 +381,10 @@ hierarchy is empty and release_agent itself should be replaced with
 conventional fsnotify. The support for remounting will be removed in
 the future.
 
-To Specify a hierarchy's release_agent:
-# mount -t cgroup -o cpuset,release_agent="/sbin/cpuset_release_agent" \
-  xxx /sys/fs/cgroup/rg1
+To Specify a hierarchy's release_agent::
+
+  # mount -t cgroup -o cpuset,release_agent="/sbin/cpuset_release_agent" \
+    xxx /sys/fs/cgroup/rg1
 
 Note that specifying 'release_agent' more than once will return failure.
 
@@ -390,32 +397,39 @@ Then under /sys/fs/cgroup/rg1 you can find a tree that corresponds to the
 tree of the cgroups in the system. For instance, /sys/fs/cgroup/rg1
 is the cgroup that holds the whole system.
 
-If you want to change the value of release_agent:
-# echo "/sbin/new_release_agent" > /sys/fs/cgroup/rg1/release_agent
+If you want to change the value of release_agent::
+
+  # echo "/sbin/new_release_agent" > /sys/fs/cgroup/rg1/release_agent
 
 It can also be changed via remount.
 
-If you want to create a new cgroup under /sys/fs/cgroup/rg1:
-# cd /sys/fs/cgroup/rg1
-# mkdir my_cgroup
+If you want to create a new cgroup under /sys/fs/cgroup/rg1::
 
-Now you want to do something with this cgroup.
-# cd my_cgroup
+  # cd /sys/fs/cgroup/rg1
+  # mkdir my_cgroup
 
-In this directory you can find several files:
-# ls
-cgroup.procs notify_on_release tasks
-(plus whatever files added by the attached subsystems)
+Now you want to do something with this cgroup:
 
-Now attach your shell to this cgroup:
-# /bin/echo $$ > tasks
+  # cd my_cgroup
+
+In this directory you can find several files::
+
+  # ls
+  cgroup.procs notify_on_release tasks
+  (plus whatever files added by the attached subsystems)
+
+Now attach your shell to this cgroup::
+
+  # /bin/echo $$ > tasks
 
 You can also create cgroups inside your cgroup by using mkdir in this
-directory.
-# mkdir my_sub_cs
+directory::
 
-To remove a cgroup, just use rmdir:
-# rmdir my_sub_cs
+  # mkdir my_sub_cs
+
+To remove a cgroup, just use rmdir::
+
+  # rmdir my_sub_cs
 
 This will fail if the cgroup is in use (has cgroups inside, or
 has processes attached, or is held alive by other subsystem-specific
@@ -424,19 +438,21 @@ reference).
 2.2 Attaching processes
 -----------------------
 
-# /bin/echo PID > tasks
+::
+
+  # /bin/echo PID > tasks
 
 Note that it is PID, not PIDs. You can only attach ONE task at a time.
-If you have several tasks to attach, you have to do it one after another:
+If you have several tasks to attach, you have to do it one after another::
 
-# /bin/echo PID1 > tasks
-# /bin/echo PID2 > tasks
-	...
-# /bin/echo PIDn > tasks
+  # /bin/echo PID1 > tasks
+  # /bin/echo PID2 > tasks
+	  ...
+  # /bin/echo PIDn > tasks
 
-You can attach the current shell task by echoing 0:
+You can attach the current shell task by echoing 0::
 
-# echo 0 > tasks
+  # echo 0 > tasks
 
 You can use the cgroup.procs file instead of the tasks file to move all
 threads in a threadgroup at once. Echoing the PID of any task in a
@@ -529,7 +545,7 @@ Each subsystem may export the following methods. The only mandatory
 methods are css_alloc/free. Any others that are null are presumed to
 be successful no-ops.
 
-struct cgroup_subsys_state *css_alloc(struct cgroup *cgrp)
+``struct cgroup_subsys_state *css_alloc(struct cgroup *cgrp)``
 (cgroup_mutex held by caller)
 
 Called to allocate a subsystem state object for a cgroup. The
@@ -544,7 +560,7 @@ identified by the passed cgroup object having a NULL parent (since
 it's the root of the hierarchy) and may be an appropriate place for
 initialization code.
 
-int css_online(struct cgroup *cgrp)
+``int css_online(struct cgroup *cgrp)``
 (cgroup_mutex held by caller)
 
 Called after @cgrp successfully completed all allocations and made
@@ -554,7 +570,7 @@ callback can be used to implement reliable state sharing and
 propagation along the hierarchy. See the comment on
 cgroup_for_each_descendant_pre() for details.
 
-void css_offline(struct cgroup *cgrp);
+``void css_offline(struct cgroup *cgrp);``
 (cgroup_mutex held by caller)
 
 This is the counterpart of css_online() and called iff css_online()
@@ -564,7 +580,7 @@ all references it's holding on @cgrp. When all references are dropped,
 cgroup removal will proceed to the next step - css_free(). After this
 callback, @cgrp should be considered dead to the subsystem.
 
-void css_free(struct cgroup *cgrp)
+``void css_free(struct cgroup *cgrp)``
 (cgroup_mutex held by caller)
 
 The cgroup system is about to free @cgrp; the subsystem should free
@@ -573,7 +589,7 @@ is completely unused; @cgrp->parent is still valid. (Note - can also
 be called for a newly-created cgroup if an error occurs after this
 subsystem's create() method has been called for the new cgroup).
 
-int can_attach(struct cgroup *cgrp, struct cgroup_taskset *tset)
+``int can_attach(struct cgroup *cgrp, struct cgroup_taskset *tset)``
 (cgroup_mutex held by caller)
 
 Called prior to moving one or more tasks into a cgroup; if the
@@ -594,7 +610,7 @@ fork. If this method returns 0 (success) then this should remain valid
 while the caller holds cgroup_mutex and it is ensured that either
 attach() or cancel_attach() will be called in future.
 
-void css_reset(struct cgroup_subsys_state *css)
+``void css_reset(struct cgroup_subsys_state *css)``
 (cgroup_mutex held by caller)
 
 An optional operation which should restore @css's configuration to the
@@ -608,7 +624,7 @@ This prevents unexpected resource control from a hidden css and
 ensures that the configuration is in the initial state when it is made
 visible again later.
 
-void cancel_attach(struct cgroup *cgrp, struct cgroup_taskset *tset)
+``void cancel_attach(struct cgroup *cgrp, struct cgroup_taskset *tset)``
 (cgroup_mutex held by caller)
 
 Called when a task attach operation has failed after can_attach() has succeeded.
@@ -617,26 +633,26 @@ function, so that the subsystem can implement a rollback. If not, not necessary.
 This will be called only about subsystems whose can_attach() operation have
 succeeded. The parameters are identical to can_attach().
 
-void attach(struct cgroup *cgrp, struct cgroup_taskset *tset)
+``void attach(struct cgroup *cgrp, struct cgroup_taskset *tset)``
 (cgroup_mutex held by caller)
 
 Called after the task has been attached to the cgroup, to allow any
 post-attachment activity that requires memory allocations or blocking.
 The parameters are identical to can_attach().
 
-void fork(struct task_struct *task)
+``void fork(struct task_struct *task)``
 
 Called when a task is forked into a cgroup.
 
-void exit(struct task_struct *task)
+``void exit(struct task_struct *task)``
 
 Called during task exit.
 
-void free(struct task_struct *task)
+``void free(struct task_struct *task)``
 
 Called when the task_struct is freed.
 
-void bind(struct cgroup *root)
+``void bind(struct cgroup *root)``
 (cgroup_mutex held by caller)
 
 Called when a cgroup subsystem is rebound to a different hierarchy
@@ -649,6 +665,7 @@ that is being created/destroyed (and hence has no sub-cgroups).
 
 cgroup filesystem supports certain types of extended attributes in its
 directories and files.  The current supported types are:
+
 	- Trusted (XATTR_TRUSTED)
 	- Security (XATTR_SECURITY)
 
@@ -666,12 +683,13 @@ in containers and systemd for assorted meta data like main PID in a cgroup
 5. Questions
 ============
 
-Q: what's up with this '/bin/echo' ?
-A: bash's builtin 'echo' command does not check calls to write() against
-   errors. If you use it in the cgroup file system, you won't be
-   able to tell whether a command succeeded or failed.
+::
 
-Q: When I attach processes, only the first of the line gets really attached !
-A: We can only return one error code per call to write(). So you should also
-   put only ONE PID.
+  Q: what's up with this '/bin/echo' ?
+  A: bash's builtin 'echo' command does not check calls to write() against
+     errors. If you use it in the cgroup file system, you won't be
+     able to tell whether a command succeeded or failed.
 
+  Q: When I attach processes, only the first of the line gets really attached !
+  A: We can only return one error code per call to write(). So you should also
+     put only ONE PID.
diff --git a/Documentation/cgroup-v1/cpuacct.txt b/Documentation/cgroup-v1/cpuacct.rst
similarity index 90%
rename from Documentation/cgroup-v1/cpuacct.txt
rename to Documentation/cgroup-v1/cpuacct.rst
index 9d73cc0cadb9..d30ed81d2ad7 100644
--- a/Documentation/cgroup-v1/cpuacct.txt
+++ b/Documentation/cgroup-v1/cpuacct.rst
@@ -1,5 +1,6 @@
+=========================
 CPU Accounting Controller
--------------------------
+=========================
 
 The CPU accounting controller is used to group tasks using cgroups and
 account the CPU usage of these groups of tasks.
@@ -8,9 +9,9 @@ The CPU accounting controller supports multi-hierarchy groups. An accounting
 group accumulates the CPU usage of all of its child groups and the tasks
 directly present in its group.
 
-Accounting groups can be created by first mounting the cgroup filesystem.
+Accounting groups can be created by first mounting the cgroup filesystem::
 
-# mount -t cgroup -ocpuacct none /sys/fs/cgroup
+  # mount -t cgroup -ocpuacct none /sys/fs/cgroup
 
 With the above step, the initial or the parent accounting group becomes
 visible at /sys/fs/cgroup. At bootup, this group includes all the tasks in
@@ -19,11 +20,11 @@ the system. /sys/fs/cgroup/tasks lists the tasks in this cgroup.
 by this group which is essentially the CPU time obtained by all the tasks
 in the system.
 
-New accounting groups can be created under the parent group /sys/fs/cgroup.
+New accounting groups can be created under the parent group /sys/fs/cgroup::
 
-# cd /sys/fs/cgroup
-# mkdir g1
-# echo $$ > g1/tasks
+  # cd /sys/fs/cgroup
+  # mkdir g1
+  # echo $$ > g1/tasks
 
 The above steps create a new group g1 and move the current shell
 process (bash) into it. CPU time consumed by this bash and its children
diff --git a/Documentation/cgroup-v1/cpusets.txt b/Documentation/cgroup-v1/cpusets.rst
similarity index 90%
rename from Documentation/cgroup-v1/cpusets.txt
rename to Documentation/cgroup-v1/cpusets.rst
index 8402dd6de8df..b6a42cdea72b 100644
--- a/Documentation/cgroup-v1/cpusets.txt
+++ b/Documentation/cgroup-v1/cpusets.rst
@@ -1,35 +1,36 @@
-				CPUSETS
-				-------
+=======
+CPUSETS
+=======
 
 Copyright (C) 2004 BULL SA.
+
 Written by Simon.Derr@bull.net
 
-Portions Copyright (c) 2004-2006 Silicon Graphics, Inc.
-Modified by Paul Jackson <pj@sgi.com>
-Modified by Christoph Lameter <cl@linux.com>
-Modified by Paul Menage <menage@google.com>
-Modified by Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
+- Portions Copyright (c) 2004-2006 Silicon Graphics, Inc.
+- Modified by Paul Jackson <pj@sgi.com>
+- Modified by Christoph Lameter <cl@linux.com>
+- Modified by Paul Menage <menage@google.com>
+- Modified by Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
 
-CONTENTS:
-=========
+.. CONTENTS:
 
-1. Cpusets
-  1.1 What are cpusets ?
-  1.2 Why are cpusets needed ?
-  1.3 How are cpusets implemented ?
-  1.4 What are exclusive cpusets ?
-  1.5 What is memory_pressure ?
-  1.6 What is memory spread ?
-  1.7 What is sched_load_balance ?
-  1.8 What is sched_relax_domain_level ?
-  1.9 How do I use cpusets ?
-2. Usage Examples and Syntax
-  2.1 Basic Usage
-  2.2 Adding/removing cpus
-  2.3 Setting flags
-  2.4 Attaching processes
-3. Questions
-4. Contact
+   1. Cpusets
+     1.1 What are cpusets ?
+     1.2 Why are cpusets needed ?
+     1.3 How are cpusets implemented ?
+     1.4 What are exclusive cpusets ?
+     1.5 What is memory_pressure ?
+     1.6 What is memory spread ?
+     1.7 What is sched_load_balance ?
+     1.8 What is sched_relax_domain_level ?
+     1.9 How do I use cpusets ?
+   2. Usage Examples and Syntax
+     2.1 Basic Usage
+     2.2 Adding/removing cpus
+     2.3 Setting flags
+     2.4 Attaching processes
+   3. Questions
+   4. Contact
 
 1. Cpusets
 ==========
@@ -48,7 +49,7 @@ hooks, beyond what is already present, required to manage dynamic
 job placement on large systems.
 
 Cpusets use the generic cgroup subsystem described in
-Documentation/cgroup-v1/cgroups.txt.
+Documentation/cgroup-v1/cgroups.rst.
 
 Requests by a task, using the sched_setaffinity(2) system call to
 include CPUs in its CPU affinity mask, and using the mbind(2) and
@@ -157,7 +158,7 @@ modifying cpusets is via this cpuset file system.
 The /proc/<pid>/status file for each task has four added lines,
 displaying the task's cpus_allowed (on which CPUs it may be scheduled)
 and mems_allowed (on which Memory Nodes it may obtain memory),
-in the two formats seen in the following example:
+in the two formats seen in the following example::
 
   Cpus_allowed:   ffffffff,ffffffff,ffffffff,ffffffff
   Cpus_allowed_list:      0-127
@@ -181,6 +182,7 @@ files describing that cpuset:
  - cpuset.sched_relax_domain_level: the searching range when migrating tasks
 
 In addition, only the root cpuset has the following file:
+
  - cpuset.memory_pressure_enabled flag: compute memory_pressure?
 
 New cpusets are created using the mkdir system call or shell
@@ -266,7 +268,8 @@ to monitor a cpuset for signs of memory pressure.  It's up to the
 batch manager or other user code to decide what to do about it and
 take action.
 
-==> Unless this feature is enabled by writing "1" to the special file
+==>
+    Unless this feature is enabled by writing "1" to the special file
     /dev/cpuset/memory_pressure_enabled, the hook in the rebalance
     code of __alloc_pages() for this metric reduces to simply noticing
     that the cpuset_memory_pressure_enabled flag is zero.  So only
@@ -399,6 +402,7 @@ have tasks running on them unless explicitly assigned.
 
 This default load balancing across all CPUs is not well suited for
 the following two situations:
+
  1) On large systems, load balancing across many CPUs is expensive.
     If the system is managed using cpusets to place independent jobs
     on separate sets of CPUs, full load balancing is unnecessary.
@@ -501,6 +505,7 @@ all the CPUs that must be load balanced.
 The cpuset code builds a new such partition and passes it to the
 scheduler sched domain setup code, to have the sched domains rebuilt
 as necessary, whenever:
+
  - the 'cpuset.sched_load_balance' flag of a cpuset with non-empty CPUs changes,
  - or CPUs come or go from a cpuset with this flag enabled,
  - or 'cpuset.sched_relax_domain_level' value of a cpuset with non-empty CPUs
@@ -553,13 +558,15 @@ this searching range as you like.  This file takes int value which
 indicates size of searching range in levels ideally as follows,
 otherwise initial value -1 that indicates the cpuset has no request.
 
-  -1  : no request. use system default or follow request of others.
-   0  : no search.
-   1  : search siblings (hyperthreads in a core).
-   2  : search cores in a package.
-   3  : search cpus in a node [= system wide on non-NUMA system]
-   4  : search nodes in a chunk of node [on NUMA system]
-   5  : search system wide [on NUMA system]
+====== ===========================================================
+  -1   no request. use system default or follow request of others.
+   0   no search.
+   1   search siblings (hyperthreads in a core).
+   2   search cores in a package.
+   3   search cpus in a node [= system wide on non-NUMA system]
+   4   search nodes in a chunk of node [on NUMA system]
+   5   search system wide [on NUMA system]
+====== ===========================================================
 
 The system default is architecture dependent.  The system default
 can be changed using the relax_domain_level= boot parameter.
@@ -578,13 +585,14 @@ and whether it is acceptable or not depends on your situation.
 Don't modify this file if you are not sure.
 
 If your situation is:
+
  - The migration costs between each cpu can be assumed considerably
    small(for you) due to your special application's behavior or
    special hardware support for CPU cache etc.
  - The searching cost doesn't have impact(for you) or you can make
    the searching cost enough small by managing cpuset to compact etc.
  - The latency is required even it sacrifices cache hit rate etc.
-then increasing 'sched_relax_domain_level' would benefit you.
+   then increasing 'sched_relax_domain_level' would benefit you.
 
 
 1.9 How do I use cpusets ?
@@ -678,7 +686,7 @@ To start a new job that is to be contained within a cpuset, the steps are:
 
 For example, the following sequence of commands will setup a cpuset
 named "Charlie", containing just CPUs 2 and 3, and Memory Node 1,
-and then start a subshell 'sh' in that cpuset:
+and then start a subshell 'sh' in that cpuset::
 
   mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
   cd /sys/fs/cgroup/cpuset
@@ -693,6 +701,7 @@ and then start a subshell 'sh' in that cpuset:
   cat /proc/self/cpuset
 
 There are ways to query or modify cpusets:
+
  - via the cpuset file system directly, using the various cd, mkdir, echo,
    cat, rmdir commands from the shell, or their equivalent from C.
  - via the C library libcpuset.
@@ -722,115 +731,133 @@ Then under /sys/fs/cgroup/cpuset you can find a tree that corresponds to the
 tree of the cpusets in the system. For instance, /sys/fs/cgroup/cpuset
 is the cpuset that holds the whole system.
 
-If you want to create a new cpuset under /sys/fs/cgroup/cpuset:
-# cd /sys/fs/cgroup/cpuset
-# mkdir my_cpuset
+If you want to create a new cpuset under /sys/fs/cgroup/cpuset::
 
-Now you want to do something with this cpuset.
-# cd my_cpuset
+  # cd /sys/fs/cgroup/cpuset
+  # mkdir my_cpuset
 
-In this directory you can find several files:
-# ls
-cgroup.clone_children  cpuset.memory_pressure
-cgroup.event_control   cpuset.memory_spread_page
-cgroup.procs           cpuset.memory_spread_slab
-cpuset.cpu_exclusive   cpuset.mems
-cpuset.cpus            cpuset.sched_load_balance
-cpuset.mem_exclusive   cpuset.sched_relax_domain_level
-cpuset.mem_hardwall    notify_on_release
-cpuset.memory_migrate  tasks
+Now you want to do something with this cpuset::
+
+  # cd my_cpuset
+
+In this directory you can find several files::
+
+  # ls
+  cgroup.clone_children  cpuset.memory_pressure
+  cgroup.event_control   cpuset.memory_spread_page
+  cgroup.procs           cpuset.memory_spread_slab
+  cpuset.cpu_exclusive   cpuset.mems
+  cpuset.cpus            cpuset.sched_load_balance
+  cpuset.mem_exclusive   cpuset.sched_relax_domain_level
+  cpuset.mem_hardwall    notify_on_release
+  cpuset.memory_migrate  tasks
 
 Reading them will give you information about the state of this cpuset:
 the CPUs and Memory Nodes it can use, the processes that are using
 it, its properties.  By writing to these files you can manipulate
 the cpuset.
 
-Set some flags:
-# /bin/echo 1 > cpuset.cpu_exclusive
+Set some flags::
 
-Add some cpus:
-# /bin/echo 0-7 > cpuset.cpus
+  # /bin/echo 1 > cpuset.cpu_exclusive
 
-Add some mems:
-# /bin/echo 0-7 > cpuset.mems
+Add some cpus::
 
-Now attach your shell to this cpuset:
-# /bin/echo $$ > tasks
+  # /bin/echo 0-7 > cpuset.cpus
+
+Add some mems::
+
+  # /bin/echo 0-7 > cpuset.mems
+
+Now attach your shell to this cpuset::
+
+  # /bin/echo $$ > tasks
 
 You can also create cpusets inside your cpuset by using mkdir in this
-directory.
-# mkdir my_sub_cs
+directory::
+
+  # mkdir my_sub_cs
+
+To remove a cpuset, just use rmdir::
+
+  # rmdir my_sub_cs
 
-To remove a cpuset, just use rmdir:
-# rmdir my_sub_cs
 This will fail if the cpuset is in use (has cpusets inside, or has
 processes attached).
 
 Note that for legacy reasons, the "cpuset" filesystem exists as a
 wrapper around the cgroup filesystem.
 
-The command
+The command::
 
-mount -t cpuset X /sys/fs/cgroup/cpuset
+  mount -t cpuset X /sys/fs/cgroup/cpuset
 
-is equivalent to
+is equivalent to::
 
-mount -t cgroup -ocpuset,noprefix X /sys/fs/cgroup/cpuset
-echo "/sbin/cpuset_release_agent" > /sys/fs/cgroup/cpuset/release_agent
+  mount -t cgroup -ocpuset,noprefix X /sys/fs/cgroup/cpuset
+  echo "/sbin/cpuset_release_agent" > /sys/fs/cgroup/cpuset/release_agent
 
 2.2 Adding/removing cpus
 ------------------------
 
 This is the syntax to use when writing in the cpus or mems files
-in cpuset directories:
+in cpuset directories::
 
-# /bin/echo 1-4 > cpuset.cpus		-> set cpus list to cpus 1,2,3,4
-# /bin/echo 1,2,3,4 > cpuset.cpus	-> set cpus list to cpus 1,2,3,4
+  # /bin/echo 1-4 > cpuset.cpus		-> set cpus list to cpus 1,2,3,4
+  # /bin/echo 1,2,3,4 > cpuset.cpus	-> set cpus list to cpus 1,2,3,4
 
 To add a CPU to a cpuset, write the new list of CPUs including the
-CPU to be added. To add 6 to the above cpuset:
+CPU to be added. To add 6 to the above cpuset::
 
-# /bin/echo 1-4,6 > cpuset.cpus	-> set cpus list to cpus 1,2,3,4,6
+  # /bin/echo 1-4,6 > cpuset.cpus	-> set cpus list to cpus 1,2,3,4,6
 
 Similarly to remove a CPU from a cpuset, write the new list of CPUs
 without the CPU to be removed.
 
-To remove all the CPUs:
+To remove all the CPUs::
 
-# /bin/echo "" > cpuset.cpus		-> clear cpus list
+  # /bin/echo "" > cpuset.cpus		-> clear cpus list
 
 2.3 Setting flags
 -----------------
 
-The syntax is very simple:
+The syntax is very simple::
 
-# /bin/echo 1 > cpuset.cpu_exclusive 	-> set flag 'cpuset.cpu_exclusive'
-# /bin/echo 0 > cpuset.cpu_exclusive 	-> unset flag 'cpuset.cpu_exclusive'
+  # /bin/echo 1 > cpuset.cpu_exclusive 	-> set flag 'cpuset.cpu_exclusive'
+  # /bin/echo 0 > cpuset.cpu_exclusive 	-> unset flag 'cpuset.cpu_exclusive'
 
 2.4 Attaching processes
 -----------------------
 
-# /bin/echo PID > tasks
+::
+
+  # /bin/echo PID > tasks
 
 Note that it is PID, not PIDs. You can only attach ONE task at a time.
-If you have several tasks to attach, you have to do it one after another:
+If you have several tasks to attach, you have to do it one after another::
 
-# /bin/echo PID1 > tasks
-# /bin/echo PID2 > tasks
+  # /bin/echo PID1 > tasks
+  # /bin/echo PID2 > tasks
 	...
-# /bin/echo PIDn > tasks
+  # /bin/echo PIDn > tasks
 
 
 3. Questions
 ============
 
-Q: what's up with this '/bin/echo' ?
-A: bash's builtin 'echo' command does not check calls to write() against
+Q:
+   what's up with this '/bin/echo' ?
+
+A:
+   bash's builtin 'echo' command does not check calls to write() against
    errors. If you use it in the cpuset file system, you won't be
    able to tell whether a command succeeded or failed.
 
-Q: When I attach processes, only the first of the line gets really attached !
-A: We can only return one error code per call to write(). So you should also
+Q:
+   When I attach processes, only the first of the line gets really attached !
+
+A:
+   We can only return one error code per call to write(). So you should also
    put only ONE pid.
 
 4. Contact
diff --git a/Documentation/cgroup-v1/devices.txt b/Documentation/cgroup-v1/devices.rst
similarity index 88%
rename from Documentation/cgroup-v1/devices.txt
rename to Documentation/cgroup-v1/devices.rst
index 3c1095ca02ea..e1886783961e 100644
--- a/Documentation/cgroup-v1/devices.txt
+++ b/Documentation/cgroup-v1/devices.rst
@@ -1,6 +1,9 @@
+===========================
 Device Whitelist Controller
+===========================
 
-1. Description:
+1. Description
+==============
 
 Implement a cgroup to track and enforce open and mknod restrictions
 on device files.  A device cgroup associates a device access
@@ -16,24 +19,26 @@ devices from the whitelist or add new entries.  A child cgroup can
 never receive a device access which is denied by its parent.
 
 2. User Interface
+=================
 
 An entry is added using devices.allow, and removed using
-devices.deny.  For instance
+devices.deny.  For instance::
 
 	echo 'c 1:3 mr' > /sys/fs/cgroup/1/devices.allow
 
 allows cgroup 1 to read and mknod the device usually known as
-/dev/null.  Doing
+/dev/null.  Doing::
 
 	echo a > /sys/fs/cgroup/1/devices.deny
 
-will remove the default 'a *:* rwm' entry. Doing
+will remove the default 'a *:* rwm' entry. Doing::
 
 	echo a > /sys/fs/cgroup/1/devices.allow
 
 will add the 'a *:* rwm' entry to the whitelist.
 
 3. Security
+===========
 
 Any task can move itself between cgroups.  This clearly won't
 suffice, but we can decide the best way to adequately restrict
@@ -50,6 +55,7 @@ A cgroup may not be granted more permissions than the cgroup's
 parent has.
 
 4. Hierarchy
+============
 
 device cgroups maintain hierarchy by making sure a cgroup never has more
 access permissions than its parent.  Every time an entry is written to
@@ -58,7 +64,8 @@ from their whitelist and all the locally set whitelist entries will be
 re-evaluated.  In case one of the locally set whitelist entries would provide
 more access than the cgroup's parent, it'll be removed from the whitelist.
 
-Example:
+Example::
+
       A
      / \
         B
@@ -67,10 +74,12 @@ Example:
     A            allow		"b 8:* rwm", "c 116:1 rw"
     B            deny		"c 1:3 rwm", "c 116:2 rwm", "b 3:* rwm"
 
-If a device is denied in group A:
+If a device is denied in group A::
+
 	# echo "c 116:* r" > A/devices.deny
+
 it'll propagate down and after revalidating B's entries, the whitelist entry
-"c 116:2 rwm" will be removed:
+"c 116:2 rwm" will be removed::
 
     group        whitelist entries                        denied devices
     A            all                                      "b 8:* rwm", "c 116:* rw"
@@ -79,7 +88,8 @@ it'll propagate down and after revalidating B's entries, the whitelist entry
 In case parent's exceptions change and local exceptions are not allowed
 anymore, they'll be deleted.
 
-Notice that new whitelist entries will not be propagated:
+Notice that new whitelist entries will not be propagated::
+
       A
      / \
         B
@@ -88,24 +98,30 @@ Notice that new whitelist entries will not be propagated:
     A            "c 1:3 rwm", "c 1:5 r"                   all the rest
     B            "c 1:3 rwm", "c 1:5 r"                   all the rest
 
-when adding "c *:3 rwm":
+when adding ``c *:3 rwm``::
+
 	# echo "c *:3 rwm" >A/devices.allow
 
-the result:
+the result::
+
     group        whitelist entries                        denied devices
     A            "c *:3 rwm", "c 1:5 r"                   all the rest
     B            "c 1:3 rwm", "c 1:5 r"                   all the rest
 
-but now it'll be possible to add new entries to B:
+but now it'll be possible to add new entries to B::
+
 	# echo "c 2:3 rwm" >B/devices.allow
 	# echo "c 50:3 r" >B/devices.allow
-or even
+
+or even::
+
 	# echo "c *:3 rwm" >B/devices.allow
 
 Allowing or denying all by writing 'a' to devices.allow or devices.deny will
 not be possible once the device cgroups has children.
 
 4.1 Hierarchy (internal implementation)
+---------------------------------------
 
 device cgroups is implemented internally using a behavior (ALLOW, DENY) and a
 list of exceptions.  The internal state is controlled using the same user
diff --git a/Documentation/cgroup-v1/freezer-subsystem.txt b/Documentation/cgroup-v1/freezer-subsystem.rst
similarity index 95%
rename from Documentation/cgroup-v1/freezer-subsystem.txt
rename to Documentation/cgroup-v1/freezer-subsystem.rst
index e831cb2b8394..582d3427de3f 100644
--- a/Documentation/cgroup-v1/freezer-subsystem.txt
+++ b/Documentation/cgroup-v1/freezer-subsystem.rst
@@ -1,3 +1,7 @@
+==============
+Cgroup Freezer
+==============
+
 The cgroup freezer is useful to batch job management system which start
 and stop sets of tasks in order to schedule the resources of a machine
 according to the desires of a system administrator. This sort of program
@@ -23,7 +27,7 @@ blocked, or ignored it can be seen by waiting or ptracing parent tasks.
 SIGCONT is especially unsuitable since it can be caught by the task. Any
 programs designed to watch for SIGSTOP and SIGCONT could be broken by
 attempting to use SIGSTOP and SIGCONT to stop and resume tasks. We can
-demonstrate this problem using nested bash shells:
+demonstrate this problem using nested bash shells::
 
 	$ echo $$
 	16644
@@ -93,19 +97,19 @@ The following cgroupfs files are created by cgroup freezer.
 The root cgroup is non-freezable and the above interface files don't
 exist.
 
-* Examples of usage :
+* Examples of usage::
 
    # mkdir /sys/fs/cgroup/freezer
    # mount -t cgroup -ofreezer freezer /sys/fs/cgroup/freezer
    # mkdir /sys/fs/cgroup/freezer/0
    # echo $some_pid > /sys/fs/cgroup/freezer/0/tasks
 
-to get status of the freezer subsystem :
+to get status of the freezer subsystem::
 
    # cat /sys/fs/cgroup/freezer/0/freezer.state
    THAWED
 
-to freeze all tasks in the container :
+to freeze all tasks in the container::
 
    # echo FROZEN > /sys/fs/cgroup/freezer/0/freezer.state
    # cat /sys/fs/cgroup/freezer/0/freezer.state
@@ -113,7 +117,7 @@ to freeze all tasks in the container :
    # cat /sys/fs/cgroup/freezer/0/freezer.state
    FROZEN
 
-to unfreeze all tasks in the container :
+to unfreeze all tasks in the container::
 
    # echo THAWED > /sys/fs/cgroup/freezer/0/freezer.state
    # cat /sys/fs/cgroup/freezer/0/freezer.state
diff --git a/Documentation/cgroup-v1/hugetlb.txt b/Documentation/cgroup-v1/hugetlb.rst
similarity index 74%
rename from Documentation/cgroup-v1/hugetlb.txt
rename to Documentation/cgroup-v1/hugetlb.rst
index 106245c3aecc..7056a185914b 100644
--- a/Documentation/cgroup-v1/hugetlb.txt
+++ b/Documentation/cgroup-v1/hugetlb.rst
@@ -1,5 +1,6 @@
+==================
 HugeTLB Controller
--------------------
+==================
 
 The HugeTLB controller allows to limit the HugeTLB usage per control group and
 enforces the controller limit during page fault. Since HugeTLB doesn't
@@ -16,16 +17,16 @@ With the above step, the initial or the parent HugeTLB group becomes
 visible at /sys/fs/cgroup. At bootup, this group includes all the tasks in
 the system. /sys/fs/cgroup/tasks lists the tasks in this cgroup.
 
-New groups can be created under the parent group /sys/fs/cgroup.
+New groups can be created under the parent group /sys/fs/cgroup::
 
-# cd /sys/fs/cgroup
-# mkdir g1
-# echo $$ > g1/tasks
+  # cd /sys/fs/cgroup
+  # mkdir g1
+  # echo $$ > g1/tasks
 
 The above steps create a new group g1 and move the current shell
 process (bash) into it.
 
-Brief summary of control files
+Brief summary of control files::
 
  hugetlb.<hugepagesize>.limit_in_bytes     # set/show limit of "hugepagesize" hugetlb usage
  hugetlb.<hugepagesize>.max_usage_in_bytes # show max "hugepagesize" hugetlb  usage recorded
@@ -33,13 +34,13 @@ Brief summary of control files
  hugetlb.<hugepagesize>.failcnt		   # show the number of allocation failure due to HugeTLB limit
 
 For a system supporting two hugepage size (16M and 16G) the control
-files include:
+files include::
 
-hugetlb.16GB.limit_in_bytes
-hugetlb.16GB.max_usage_in_bytes
-hugetlb.16GB.usage_in_bytes
-hugetlb.16GB.failcnt
-hugetlb.16MB.limit_in_bytes
-hugetlb.16MB.max_usage_in_bytes
-hugetlb.16MB.usage_in_bytes
-hugetlb.16MB.failcnt
+  hugetlb.16GB.limit_in_bytes
+  hugetlb.16GB.max_usage_in_bytes
+  hugetlb.16GB.usage_in_bytes
+  hugetlb.16GB.failcnt
+  hugetlb.16MB.limit_in_bytes
+  hugetlb.16MB.max_usage_in_bytes
+  hugetlb.16MB.usage_in_bytes
+  hugetlb.16MB.failcnt
diff --git a/Documentation/cgroup-v1/index.rst b/Documentation/cgroup-v1/index.rst
new file mode 100644
index 000000000000..fe76d42edc11
--- /dev/null
+++ b/Documentation/cgroup-v1/index.rst
@@ -0,0 +1,30 @@
+:orphan:
+
+========================
+Control Groups version 1
+========================
+
+.. toctree::
+    :maxdepth: 1
+
+    cgroups
+
+    blkio-controller
+    cpuacct
+    cpusets
+    devices
+    freezer-subsystem
+    hugetlb
+    memcg_test
+    memory
+    net_cls
+    net_prio
+    pids
+    rdma
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/cgroup-v1/memcg_test.txt b/Documentation/cgroup-v1/memcg_test.rst
similarity index 62%
rename from Documentation/cgroup-v1/memcg_test.txt
rename to Documentation/cgroup-v1/memcg_test.rst
index 621e29ffb358..9d1de6600c45 100644
--- a/Documentation/cgroup-v1/memcg_test.txt
+++ b/Documentation/cgroup-v1/memcg_test.rst
@@ -1,32 +1,43 @@
-Memory Resource Controller(Memcg)  Implementation Memo.
+=====================================================
+Memory Resource Controller(Memcg) Implementation Memo
+=====================================================
+
 Last Updated: 2010/2
+
 Base Kernel Version: based on 2.6.33-rc7-mm(candidate for 34).
 
 Because VM is getting complex (one of reasons is memcg...), memcg's behavior
 is complex. This is a document for memcg's internal behavior.
 Please note that implementation details can be changed.
 
-(*) Topics on API should be in Documentation/cgroup-v1/memory.txt)
+(*) Topics on API should be in Documentation/cgroup-v1/memory.rst)
 
 0. How to record usage ?
+========================
+
    2 objects are used.
 
    page_cgroup ....an object per page.
+
 	Allocated at boot or memory hotplug. Freed at memory hot removal.
 
    swap_cgroup ... an entry per swp_entry.
+
 	Allocated at swapon(). Freed at swapoff().
 
    The page_cgroup has USED bit and double count against a page_cgroup never
    occurs. swap_cgroup is used only when a charged page is swapped-out.
 
 1. Charge
+=========
 
    a page/swp_entry may be charged (usage += PAGE_SIZE) at
 
 	mem_cgroup_try_charge()
 
 2. Uncharge
+===========
+
   a page/swp_entry may be uncharged (usage -= PAGE_SIZE) by
 
 	mem_cgroup_uncharge()
@@ -37,9 +48,12 @@ Please note that implementation details can be changed.
 	  disappears.
 
 3. charge-commit-cancel
+=======================
+
 	Memcg pages are charged in two steps:
-		mem_cgroup_try_charge()
-		mem_cgroup_commit_charge() or mem_cgroup_cancel_charge()
+
+		- mem_cgroup_try_charge()
+		- mem_cgroup_commit_charge() or mem_cgroup_cancel_charge()
 
 	At try_charge(), there are no flags to say "this page is charged".
 	at this point, usage += PAGE_SIZE.
@@ -51,6 +65,8 @@ Please note that implementation details can be changed.
 Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 
 4. Anonymous
+============
+
 	Anonymous page is newly allocated at
 		  - page fault into MAP_ANONYMOUS mapping.
 		  - Copy-On-Write.
@@ -78,34 +94,45 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 	(e) zap_pte() is called and swp_entry's refcnt -=1 -> 0.
 
 5. Page Cache
+=============
+
    	Page Cache is charged at
 	- add_to_page_cache_locked().
 
 	The logic is very clear. (About migration, see below)
-	Note: __remove_from_page_cache() is called by remove_from_page_cache()
-	and __remove_mapping().
+
+	Note:
+	  __remove_from_page_cache() is called by remove_from_page_cache()
+	  and __remove_mapping().
 
 6. Shmem(tmpfs) Page Cache
+===========================
+
 	The best way to understand shmem's page state transition is to read
 	mm/shmem.c.
+
 	But brief explanation of the behavior of memcg around shmem will be
 	helpful to understand the logic.
 
 	Shmem's page (just leaf page, not direct/indirect block) can be on
+
 		- radix-tree of shmem's inode.
 		- SwapCache.
 		- Both on radix-tree and SwapCache. This happens at swap-in
 		  and swap-out,
 
 	It's charged when...
+
 	- A new page is added to shmem's radix-tree.
 	- A swp page is read. (move a charge from swap_cgroup to page_cgroup)
 
 7. Page Migration
+=================
 
 	mem_cgroup_migrate()
 
 8. LRU
+======
         Each memcg has its own private LRU. Now, its handling is under global
 	VM's control (means that it's handled under global pgdat->lru_lock).
 	Almost all routines around memcg's LRU is called by global LRU's
@@ -114,163 +141,211 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 	A special function is mem_cgroup_isolate_pages(). This scans
 	memcg's private LRU and call __isolate_lru_page() to extract a page
 	from LRU.
+
 	(By __isolate_lru_page(), the page is removed from both of global and
-	 private LRU.)
+	private LRU.)
 
 
 9. Typical Tests.
+=================
 
  Tests for racy cases.
 
- 9.1 Small limit to memcg.
+9.1 Small limit to memcg.
+-------------------------
+
 	When you do test to do racy case, it's good test to set memcg's limit
 	to be very small rather than GB. Many races found in the test under
 	xKB or xxMB limits.
+
 	(Memory behavior under GB and Memory behavior under MB shows very
-	 different situation.)
+	different situation.)
+
+9.2 Shmem
+---------
 
- 9.2 Shmem
 	Historically, memcg's shmem handling was poor and we saw some amount
 	of troubles here. This is because shmem is page-cache but can be
 	SwapCache. Test with shmem/tmpfs is always good test.
 
- 9.3 Migration
+9.3 Migration
+-------------
+
 	For NUMA, migration is an another special case. To do easy test, cpuset
-	is useful. Following is a sample script to do migration.
+	is useful. Following is a sample script to do migration::
 
-	mount -t cgroup -o cpuset none /opt/cpuset
+		mount -t cgroup -o cpuset none /opt/cpuset
 
-	mkdir /opt/cpuset/01
-	echo 1 > /opt/cpuset/01/cpuset.cpus
-	echo 0 > /opt/cpuset/01/cpuset.mems
-	echo 1 > /opt/cpuset/01/cpuset.memory_migrate
-	mkdir /opt/cpuset/02
-	echo 1 > /opt/cpuset/02/cpuset.cpus
-	echo 1 > /opt/cpuset/02/cpuset.mems
-	echo 1 > /opt/cpuset/02/cpuset.memory_migrate
+		mkdir /opt/cpuset/01
+		echo 1 > /opt/cpuset/01/cpuset.cpus
+		echo 0 > /opt/cpuset/01/cpuset.mems
+		echo 1 > /opt/cpuset/01/cpuset.memory_migrate
+		mkdir /opt/cpuset/02
+		echo 1 > /opt/cpuset/02/cpuset.cpus
+		echo 1 > /opt/cpuset/02/cpuset.mems
+		echo 1 > /opt/cpuset/02/cpuset.memory_migrate
 
 	In above set, when you moves a task from 01 to 02, page migration to
 	node 0 to node 1 will occur. Following is a script to migrate all
-	under cpuset.
-	--
-	move_task()
-	{
-	for pid in $1
-        do
-                /bin/echo $pid >$2/tasks 2>/dev/null
-		echo -n $pid
-		echo -n " "
-        done
-	echo END
-	}
+	under cpuset.::
+
+		--
+		move_task()
+		{
+		for pid in $1
+		do
+			/bin/echo $pid >$2/tasks 2>/dev/null
+			echo -n $pid
+			echo -n " "
+		done
+		echo END
+		}
+
+		G1_TASK=`cat ${G1}/tasks`
+		G2_TASK=`cat ${G2}/tasks`
+		move_task "${G1_TASK}" ${G2} &
+		--
+
+9.4 Memory hotplug
+------------------
 
-	G1_TASK=`cat ${G1}/tasks`
-	G2_TASK=`cat ${G2}/tasks`
-	move_task "${G1_TASK}" ${G2} &
-	--
- 9.4 Memory hotplug.
 	memory hotplug test is one of good test.
-	to offline memory, do following.
-	# echo offline > /sys/devices/system/memory/memoryXXX/state
+
+	to offline memory, do following::
+
+		# echo offline > /sys/devices/system/memory/memoryXXX/state
+
 	(XXX is the place of memory)
+
 	This is an easy way to test page migration, too.
 
- 9.5 mkdir/rmdir
+9.5 mkdir/rmdir
+---------------
+
 	When using hierarchy, mkdir/rmdir test should be done.
-	Use tests like the following.
+	Use tests like the following::
 
-	echo 1 >/opt/cgroup/01/memory/use_hierarchy
-	mkdir /opt/cgroup/01/child_a
-	mkdir /opt/cgroup/01/child_b
+		echo 1 >/opt/cgroup/01/memory/use_hierarchy
+		mkdir /opt/cgroup/01/child_a
+		mkdir /opt/cgroup/01/child_b
 
-	set limit to 01.
-	add limit to 01/child_b
-	run jobs under child_a and child_b
+		set limit to 01.
+		add limit to 01/child_b
+		run jobs under child_a and child_b
 
-	create/delete following groups at random while jobs are running.
-	/opt/cgroup/01/child_a/child_aa
-	/opt/cgroup/01/child_b/child_bb
-	/opt/cgroup/01/child_c
+	create/delete following groups at random while jobs are running::
+
+		/opt/cgroup/01/child_a/child_aa
+		/opt/cgroup/01/child_b/child_bb
+		/opt/cgroup/01/child_c
 
 	running new jobs in new group is also good.
 
- 9.6 Mount with other subsystems.
+9.6 Mount with other subsystems
+-------------------------------
+
 	Mounting with other subsystems is a good test because there is a
 	race and lock dependency with other cgroup subsystems.
 
-	example)
-	# mount -t cgroup none /cgroup -o cpuset,memory,cpu,devices
+	example::
+
+		# mount -t cgroup none /cgroup -o cpuset,memory,cpu,devices
 
 	and do task move, mkdir, rmdir etc...under this.
 
- 9.7 swapoff.
+9.7 swapoff
+-----------
+
 	Besides management of swap is one of complicated parts of memcg,
 	call path of swap-in at swapoff is not same as usual swap-in path..
 	It's worth to be tested explicitly.
 
-	For example, test like following is good.
-	(Shell-A)
-	# mount -t cgroup none /cgroup -o memory
-	# mkdir /cgroup/test
-	# echo 40M > /cgroup/test/memory.limit_in_bytes
-	# echo 0 > /cgroup/test/tasks
+	For example, test like following is good:
+
+	(Shell-A)::
+
+		# mount -t cgroup none /cgroup -o memory
+		# mkdir /cgroup/test
+		# echo 40M > /cgroup/test/memory.limit_in_bytes
+		# echo 0 > /cgroup/test/tasks
+
 	Run malloc(100M) program under this. You'll see 60M of swaps.
-	(Shell-B)
-	# move all tasks in /cgroup/test to /cgroup
-	# /sbin/swapoff -a
-	# rmdir /cgroup/test
-	# kill malloc task.
+
+	(Shell-B)::
+
+		# move all tasks in /cgroup/test to /cgroup
+		# /sbin/swapoff -a
+		# rmdir /cgroup/test
+		# kill malloc task.
 
 	Of course, tmpfs v.s. swapoff test should be tested, too.
 
- 9.8 OOM-Killer
+9.8 OOM-Killer
+--------------
+
 	Out-of-memory caused by memcg's limit will kill tasks under
 	the memcg. When hierarchy is used, a task under hierarchy
 	will be killed by the kernel.
+
 	In this case, panic_on_oom shouldn't be invoked and tasks
 	in other groups shouldn't be killed.
 
 	It's not difficult to cause OOM under memcg as following.
-	Case A) when you can swapoff
-	#swapoff -a
-	#echo 50M > /memory.limit_in_bytes
+
+	Case A) when you can swapoff::
+
+		#swapoff -a
+		#echo 50M > /memory.limit_in_bytes
+
 	run 51M of malloc
 
-	Case B) when you use mem+swap limitation.
-	#echo 50M > memory.limit_in_bytes
-	#echo 50M > memory.memsw.limit_in_bytes
+	Case B) when you use mem+swap limitation::
+
+		#echo 50M > memory.limit_in_bytes
+		#echo 50M > memory.memsw.limit_in_bytes
+
 	run 51M of malloc
 
- 9.9 Move charges at task migration
+9.9 Move charges at task migration
+----------------------------------
+
 	Charges associated with a task can be moved along with task migration.
 
-	(Shell-A)
-	#mkdir /cgroup/A
-	#echo $$ >/cgroup/A/tasks
+	(Shell-A)::
+
+		#mkdir /cgroup/A
+		#echo $$ >/cgroup/A/tasks
+
 	run some programs which uses some amount of memory in /cgroup/A.
 
-	(Shell-B)
-	#mkdir /cgroup/B
-	#echo 1 >/cgroup/B/memory.move_charge_at_immigrate
-	#echo "pid of the program running in group A" >/cgroup/B/tasks
+	(Shell-B)::
 
-	You can see charges have been moved by reading *.usage_in_bytes or
+		#mkdir /cgroup/B
+		#echo 1 >/cgroup/B/memory.move_charge_at_immigrate
+		#echo "pid of the program running in group A" >/cgroup/B/tasks
+
+	You can see charges have been moved by reading ``*.usage_in_bytes`` or
 	memory.stat of both A and B.
-	See 8.2 of Documentation/cgroup-v1/memory.txt to see what value should be
-	written to move_charge_at_immigrate.
 
- 9.10 Memory thresholds
+	See 8.2 of Documentation/cgroup-v1/memory.rst to see what value should
+	be written to move_charge_at_immigrate.
+
+9.10 Memory thresholds
+----------------------
+
 	Memory controller implements memory thresholds using cgroups notification
 	API. You can use tools/cgroup/cgroup_event_listener.c to test it.
 
-	(Shell-A) Create cgroup and run event listener
-	# mkdir /cgroup/A
-	# ./cgroup_event_listener /cgroup/A/memory.usage_in_bytes 5M
+	(Shell-A) Create cgroup and run event listener::
 
-	(Shell-B) Add task to cgroup and try to allocate and free memory
-	# echo $$ >/cgroup/A/tasks
-	# a="$(dd if=/dev/zero bs=1M count=10)"
-	# a=
+		# mkdir /cgroup/A
+		# ./cgroup_event_listener /cgroup/A/memory.usage_in_bytes 5M
+
+	(Shell-B) Add task to cgroup and try to allocate and free memory::
+
+		# echo $$ >/cgroup/A/tasks
+		# a="$(dd if=/dev/zero bs=1M count=10)"
+		# a=
 
 	You will see message from cgroup_event_listener every time you cross
 	the thresholds.
diff --git a/Documentation/cgroup-v1/memory.txt b/Documentation/cgroup-v1/memory.rst
similarity index 71%
rename from Documentation/cgroup-v1/memory.txt
rename to Documentation/cgroup-v1/memory.rst
index a33cedf85427..41bdc038dad9 100644
--- a/Documentation/cgroup-v1/memory.txt
+++ b/Documentation/cgroup-v1/memory.rst
@@ -1,22 +1,26 @@
+==========================
 Memory Resource Controller
+==========================
 
-NOTE: This document is hopelessly outdated and it asks for a complete
+NOTE:
+      This document is hopelessly outdated and it asks for a complete
       rewrite. It still contains a useful information so we are keeping it
       here but make sure to check the current code if you need a deeper
       understanding.
 
-NOTE: The Memory Resource Controller has generically been referred to as the
+NOTE:
+      The Memory Resource Controller has generically been referred to as the
       memory controller in this document. Do not confuse memory controller
       used here with the memory controller that is used in hardware.
 
-(For editors)
-In this document:
+(For editors) In this document:
       When we mention a cgroup (cgroupfs's directory) with memory controller,
       we call it "memory cgroup". When you see git-log and source code, you'll
       see patch's title and function names tend to use "memcg".
       In this document, we avoid using it.
 
 Benefits and Purpose of the memory controller
+=============================================
 
 The memory controller isolates the memory behaviour of a group of tasks
 from the rest of the system. The article on LWN [12] mentions some probable
@@ -38,6 +42,7 @@ e. There are several other use cases; find one or use the controller just
 Current Status: linux-2.6.34-mmotm(development version of 2010/April)
 
 Features:
+
  - accounting anonymous pages, file caches, swap caches usage and limiting them.
  - pages are linked to per-memcg LRU exclusively, and there is no global LRU.
  - optionally, memory+swap usage can be accounted and limited.
@@ -54,41 +59,48 @@ Features:
 
 Brief summary of control files.
 
- tasks				 # attach a task(thread) and show list of threads
- cgroup.procs			 # show list of processes
- cgroup.event_control		 # an interface for event_fd()
- memory.usage_in_bytes		 # show current usage for memory
-				 (See 5.5 for details)
- memory.memsw.usage_in_bytes	 # show current usage for memory+Swap
-				 (See 5.5 for details)
- memory.limit_in_bytes		 # set/show limit of memory usage
- memory.memsw.limit_in_bytes	 # set/show limit of memory+Swap usage
- memory.failcnt			 # show the number of memory usage hits limits
- memory.memsw.failcnt		 # show the number of memory+Swap hits limits
- memory.max_usage_in_bytes	 # show max memory usage recorded
- memory.memsw.max_usage_in_bytes # show max memory+Swap usage recorded
- memory.soft_limit_in_bytes	 # set/show soft limit of memory usage
- memory.stat			 # show various statistics
- memory.use_hierarchy		 # set/show hierarchical account enabled
- memory.force_empty		 # trigger forced page reclaim
- memory.pressure_level		 # set memory pressure notifications
- memory.swappiness		 # set/show swappiness parameter of vmscan
-				 (See sysctl's vm.swappiness)
- memory.move_charge_at_immigrate # set/show controls of moving charges
- memory.oom_control		 # set/show oom controls.
- memory.numa_stat		 # show the number of memory usage per numa node
+==================================== ==========================================
+ tasks				     attach a task(thread) and show list of
+				     threads
+ cgroup.procs			     show list of processes
+ cgroup.event_control		     an interface for event_fd()
+ memory.usage_in_bytes		     show current usage for memory
+				     (See 5.5 for details)
+ memory.memsw.usage_in_bytes	     show current usage for memory+Swap
+				     (See 5.5 for details)
+ memory.limit_in_bytes		     set/show limit of memory usage
+ memory.memsw.limit_in_bytes	     set/show limit of memory+Swap usage
+ memory.failcnt			     show the number of memory usage hits limits
+ memory.memsw.failcnt		     show the number of memory+Swap hits limits
+ memory.max_usage_in_bytes	     show max memory usage recorded
+ memory.memsw.max_usage_in_bytes     show max memory+Swap usage recorded
+ memory.soft_limit_in_bytes	     set/show soft limit of memory usage
+ memory.stat			     show various statistics
+ memory.use_hierarchy		     set/show hierarchical account enabled
+ memory.force_empty		     trigger forced page reclaim
+ memory.pressure_level		     set memory pressure notifications
+ memory.swappiness		     set/show swappiness parameter of vmscan
+				     (See sysctl's vm.swappiness)
+ memory.move_charge_at_immigrate     set/show controls of moving charges
+ memory.oom_control		     set/show oom controls.
+ memory.numa_stat		     show the number of memory usage per numa
+				     node
 
- memory.kmem.limit_in_bytes      # set/show hard limit for kernel memory
- memory.kmem.usage_in_bytes      # show current kernel memory allocation
- memory.kmem.failcnt             # show the number of kernel memory usage hits limits
- memory.kmem.max_usage_in_bytes  # show max kernel memory usage recorded
+ memory.kmem.limit_in_bytes          set/show hard limit for kernel memory
+ memory.kmem.usage_in_bytes          show current kernel memory allocation
+ memory.kmem.failcnt                 show the number of kernel memory usage
+				     hits limits
+ memory.kmem.max_usage_in_bytes      show max kernel memory usage recorded
 
- memory.kmem.tcp.limit_in_bytes  # set/show hard limit for tcp buf memory
- memory.kmem.tcp.usage_in_bytes  # show current tcp buf memory allocation
- memory.kmem.tcp.failcnt            # show the number of tcp buf memory usage hits limits
- memory.kmem.tcp.max_usage_in_bytes # show max tcp buf memory usage recorded
+ memory.kmem.tcp.limit_in_bytes      set/show hard limit for tcp buf memory
+ memory.kmem.tcp.usage_in_bytes      show current tcp buf memory allocation
+ memory.kmem.tcp.failcnt             show the number of tcp buf memory usage
+				     hits limits
+ memory.kmem.tcp.max_usage_in_bytes  show max tcp buf memory usage recorded
+==================================== ==========================================
 
 1. History
+==========
 
 The memory controller has a long history. A request for comments for the memory
 controller was posted by Balbir Singh [1]. At the time the RFC was posted
@@ -103,6 +115,7 @@ at version 6; it combines both mapped (RSS) and unmapped Page
 Cache Control [11].
 
 2. Memory Control
+=================
 
 Memory is a unique resource in the sense that it is present in a limited
 amount. If a task requires a lot of CPU processing, the task can spread
@@ -120,6 +133,7 @@ are:
 The memory controller is the first controller developed.
 
 2.1. Design
+-----------
 
 The core of the design is a counter called the page_counter. The
 page_counter tracks the current memory usage and limit of the group of
@@ -127,6 +141,9 @@ processes associated with the controller. Each cgroup has a memory controller
 specific data structure (mem_cgroup) associated with it.
 
 2.2. Accounting
+---------------
+
+::
 
 		+--------------------+
 		|  mem_cgroup        |
@@ -165,6 +182,7 @@ updated. page_cgroup has its own LRU on cgroup.
 (*) page_cgroup structure is allocated at boot/memory-hotplug time.
 
 2.2.1 Accounting details
+------------------------
 
 All mapped anon pages (RSS) and cache pages (Page Cache) are accounted.
 Some pages which are never reclaimable and will not be on the LRU
@@ -191,6 +209,7 @@ Note: we just account pages-on-LRU because our purpose is to control amount
 of used pages; not-on-LRU pages tend to be out-of-control from VM view.
 
 2.3 Shared Page Accounting
+--------------------------
 
 Shared pages are accounted on the basis of the first touch approach. The
 cgroup that first touches a page is accounted for the page. The principle
@@ -207,11 +226,13 @@ be backed into memory in force, charges for pages are accounted against the
 caller of swapoff rather than the users of shmem.
 
 2.4 Swap Extension (CONFIG_MEMCG_SWAP)
+--------------------------------------
 
 Swap Extension allows you to record charge for swap. A swapped-in page is
 charged back to original page allocator if possible.
 
 When swap is accounted, following files are added.
+
  - memory.memsw.usage_in_bytes.
  - memory.memsw.limit_in_bytes.
 
@@ -224,14 +245,16 @@ In this case, setting memsw.limit_in_bytes=3G will prevent bad use of swap.
 By using the memsw limit, you can avoid system OOM which can be caused by swap
 shortage.
 
-* why 'memory+swap' rather than swap.
+**why 'memory+swap' rather than swap**
+
 The global LRU(kswapd) can swap out arbitrary pages. Swap-out means
 to move account from memory to swap...there is no change in usage of
 memory+swap. In other words, when we want to limit the usage of swap without
 affecting global LRU, memory+swap limit is better than just limiting swap from
 an OS point of view.
 
-* What happens when a cgroup hits memory.memsw.limit_in_bytes
+**What happens when a cgroup hits memory.memsw.limit_in_bytes**
+
 When a cgroup hits memory.memsw.limit_in_bytes, it's useless to do swap-out
 in this cgroup. Then, swap-out will not be done by cgroup routine and file
 caches are dropped. But as mentioned above, global LRU can do swapout memory
@@ -239,6 +262,7 @@ from it for sanity of the system's memory management state. You can't forbid
 it by cgroup.
 
 2.5 Reclaim
+-----------
 
 Each cgroup maintains a per cgroup LRU which has the same structure as
 global VM. When a cgroup goes over its limit, we first try
@@ -251,29 +275,36 @@ The reclaim algorithm has not been modified for cgroups, except that
 pages that are selected for reclaiming come from the per-cgroup LRU
 list.
 
-NOTE: Reclaim does not work for the root cgroup, since we cannot set any
-limits on the root cgroup.
+NOTE:
+  Reclaim does not work for the root cgroup, since we cannot set any
+  limits on the root cgroup.
 
-Note2: When panic_on_oom is set to "2", the whole system will panic.
+Note2:
+  When panic_on_oom is set to "2", the whole system will panic.
 
 When oom event notifier is registered, event will be delivered.
 (See oom_control section)
 
 2.6 Locking
+-----------
 
    lock_page_cgroup()/unlock_page_cgroup() should not be called under
    the i_pages lock.
 
    Other lock order is following:
+
    PG_locked.
-   mm->page_table_lock
-       pgdat->lru_lock
-	  lock_page_cgroup.
+     mm->page_table_lock
+         pgdat->lru_lock
+	   lock_page_cgroup.
+
   In many cases, just lock_page_cgroup() is called.
+
   per-zone-per-cgroup LRU (cgroup's private LRU) is just guarded by
   pgdat->lru_lock, it has no lock of its own.
 
 2.7 Kernel Memory Extension (CONFIG_MEMCG_KMEM)
+-----------------------------------------------
 
 With the Kernel memory extension, the Memory Controller is able to limit
 the amount of kernel memory used by the system. Kernel memory is fundamentally
@@ -288,6 +319,7 @@ Kernel memory limits are not imposed for the root cgroup. Usage for the root
 cgroup may or may not be accounted. The memory used is accumulated into
 memory.kmem.usage_in_bytes, or in a separate counter when it makes sense.
 (currently only for tcp).
+
 The main "kmem" counter is fed into the main counter, so kmem charges will
 also be visible from the user counter.
 
@@ -295,36 +327,42 @@ Currently no soft limit is implemented for kernel memory. It is future work
 to trigger slab reclaim when those limits are reached.
 
 2.7.1 Current Kernel Memory resources accounted
+-----------------------------------------------
 
-* stack pages: every process consumes some stack pages. By accounting into
-kernel memory, we prevent new processes from being created when the kernel
-memory usage is too high.
+stack pages:
+  every process consumes some stack pages. By accounting into
+  kernel memory, we prevent new processes from being created when the kernel
+  memory usage is too high.
 
-* slab pages: pages allocated by the SLAB or SLUB allocator are tracked. A copy
-of each kmem_cache is created every time the cache is touched by the first time
-from inside the memcg. The creation is done lazily, so some objects can still be
-skipped while the cache is being created. All objects in a slab page should
-belong to the same memcg. This only fails to hold when a task is migrated to a
-different memcg during the page allocation by the cache.
+slab pages:
+  pages allocated by the SLAB or SLUB allocator are tracked. A copy
+  of each kmem_cache is created every time the cache is touched by the first time
+  from inside the memcg. The creation is done lazily, so some objects can still be
+  skipped while the cache is being created. All objects in a slab page should
+  belong to the same memcg. This only fails to hold when a task is migrated to a
+  different memcg during the page allocation by the cache.
 
-* sockets memory pressure: some sockets protocols have memory pressure
-thresholds. The Memory Controller allows them to be controlled individually
-per cgroup, instead of globally.
+sockets memory pressure:
+  some sockets protocols have memory pressure
+  thresholds. The Memory Controller allows them to be controlled individually
+  per cgroup, instead of globally.
 
-* tcp memory pressure: sockets memory pressure for the tcp protocol.
+tcp memory pressure:
+  sockets memory pressure for the tcp protocol.
 
 2.7.2 Common use cases
+----------------------
 
 Because the "kmem" counter is fed to the main user counter, kernel memory can
 never be limited completely independently of user memory. Say "U" is the user
 limit, and "K" the kernel limit. There are three possible ways limits can be
 set:
 
-    U != 0, K = unlimited:
+U != 0, K = unlimited:
     This is the standard memcg limitation mechanism already present before kmem
     accounting. Kernel memory is completely ignored.
 
-    U != 0, K < U:
+U != 0, K < U:
     Kernel memory is a subset of the user memory. This setup is useful in
     deployments where the total amount of memory per-cgroup is overcommited.
     Overcommiting kernel memory limits is definitely not recommended, since the
@@ -332,19 +370,23 @@ set:
     In this case, the admin could set up K so that the sum of all groups is
     never greater than the total memory, and freely set U at the cost of his
     QoS.
-    WARNING: In the current implementation, memory reclaim will NOT be
+
+WARNING:
+    In the current implementation, memory reclaim will NOT be
     triggered for a cgroup when it hits K while staying below U, which makes
     this setup impractical.
 
-    U != 0, K >= U:
+U != 0, K >= U:
     Since kmem charges will also be fed to the user counter and reclaim will be
     triggered for the cgroup for both kinds of memory. This setup gives the
     admin a unified view of memory, and it is also useful for people who just
     want to track kernel memory usage.
 
 3. User Interface
+=================
 
 3.0. Configuration
+------------------
 
 a. Enable CONFIG_CGROUPS
 b. Enable CONFIG_MEMCG
@@ -352,39 +394,53 @@ c. Enable CONFIG_MEMCG_SWAP (to use swap extension)
 d. Enable CONFIG_MEMCG_KMEM (to use kmem extension)
 
 3.1. Prepare the cgroups (see cgroups.txt, Why are cgroups needed?)
-# mount -t tmpfs none /sys/fs/cgroup
-# mkdir /sys/fs/cgroup/memory
-# mount -t cgroup none /sys/fs/cgroup/memory -o memory
+-------------------------------------------------------------------
 
-3.2. Make the new group and move bash into it
-# mkdir /sys/fs/cgroup/memory/0
-# echo $$ > /sys/fs/cgroup/memory/0/tasks
+::
 
-Since now we're in the 0 cgroup, we can alter the memory limit:
-# echo 4M > /sys/fs/cgroup/memory/0/memory.limit_in_bytes
+	# mount -t tmpfs none /sys/fs/cgroup
+	# mkdir /sys/fs/cgroup/memory
+	# mount -t cgroup none /sys/fs/cgroup/memory -o memory
 
-NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
-mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes, Gibibytes.)
+3.2. Make the new group and move bash into it::
 
-NOTE: We can write "-1" to reset the *.limit_in_bytes(unlimited).
-NOTE: We cannot set limits on the root cgroup any more.
+	# mkdir /sys/fs/cgroup/memory/0
+	# echo $$ > /sys/fs/cgroup/memory/0/tasks
 
-# cat /sys/fs/cgroup/memory/0/memory.limit_in_bytes
-4194304
+Since now we're in the 0 cgroup, we can alter the memory limit::
 
-We can check the usage:
-# cat /sys/fs/cgroup/memory/0/memory.usage_in_bytes
-1216512
+	# echo 4M > /sys/fs/cgroup/memory/0/memory.limit_in_bytes
+
+NOTE:
+  We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
+  mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes,
+  Gibibytes.)
+
+NOTE:
+  We can write "-1" to reset the ``*.limit_in_bytes(unlimited)``.
+
+NOTE:
+  We cannot set limits on the root cgroup any more.
+
+::
+
+  # cat /sys/fs/cgroup/memory/0/memory.limit_in_bytes
+  4194304
+
+We can check the usage::
+
+  # cat /sys/fs/cgroup/memory/0/memory.usage_in_bytes
+  1216512
 
 A successful write to this file does not guarantee a successful setting of
 this limit to the value written into the file. This can be due to a
 number of factors, such as rounding up to page boundaries or the total
 availability of memory on the system. The user is required to re-read
-this file after a write to guarantee the value committed by the kernel.
+this file after a write to guarantee the value committed by the kernel::
 
-# echo 1 > memory.limit_in_bytes
-# cat memory.limit_in_bytes
-4096
+  # echo 1 > memory.limit_in_bytes
+  # cat memory.limit_in_bytes
+  4096
 
 The memory.failcnt field gives the number of times that the cgroup limit was
 exceeded.
@@ -393,6 +449,7 @@ The memory.stat file gives accounting information. Now, the number of
 caches, RSS and Active pages/Inactive pages are shown.
 
 4. Testing
+==========
 
 For testing features and implementation, see memcg_test.txt.
 
@@ -408,6 +465,7 @@ But the above two are testing extreme situations.
 Trying usual test under memory controller is always helpful.
 
 4.1 Troubleshooting
+-------------------
 
 Sometimes a user might find that the application under a cgroup is
 terminated by the OOM killer. There are several causes for this:
@@ -422,6 +480,7 @@ To know what happens, disabling OOM_Kill as per "10. OOM Control" (below) and
 seeing what happens will be helpful.
 
 4.2 Task migration
+------------------
 
 When a task migrates from one cgroup to another, its charge is not
 carried forward by default. The pages allocated from the original cgroup still
@@ -432,6 +491,7 @@ You can move charges of a task along with task migration.
 See 8. "Move charges at task migration"
 
 4.3 Removing a cgroup
+---------------------
 
 A cgroup can be removed by rmdir, but as discussed in sections 4.1 and 4.2, a
 cgroup might have some charge associated with it, even though all
@@ -448,13 +508,15 @@ will be charged as a new owner of it.
 
 About use_hierarchy, see Section 6.
 
-5. Misc. interfaces.
+5. Misc. interfaces
+===================
 
 5.1 force_empty
+---------------
   memory.force_empty interface is provided to make cgroup's memory usage empty.
-  When writing anything to this
+  When writing anything to this::
 
-  # echo 0 > memory.force_empty
+    # echo 0 > memory.force_empty
 
   the cgroup will be reclaimed and as many pages reclaimed as possible.
 
@@ -471,50 +533,61 @@ About use_hierarchy, see Section 6.
   About use_hierarchy, see Section 6.
 
 5.2 stat file
+-------------
 
 memory.stat file includes following statistics
 
-# per-memory cgroup local status
-cache		- # of bytes of page cache memory.
-rss		- # of bytes of anonymous and swap cache memory (includes
+per-memory cgroup local status
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+=============== ===============================================================
+cache		# of bytes of page cache memory.
+rss		# of bytes of anonymous and swap cache memory (includes
 		transparent hugepages).
-rss_huge	- # of bytes of anonymous transparent hugepages.
-mapped_file	- # of bytes of mapped file (includes tmpfs/shmem)
-pgpgin		- # of charging events to the memory cgroup. The charging
+rss_huge	# of bytes of anonymous transparent hugepages.
+mapped_file	# of bytes of mapped file (includes tmpfs/shmem)
+pgpgin		# of charging events to the memory cgroup. The charging
 		event happens each time a page is accounted as either mapped
 		anon page(RSS) or cache page(Page Cache) to the cgroup.
-pgpgout		- # of uncharging events to the memory cgroup. The uncharging
+pgpgout		# of uncharging events to the memory cgroup. The uncharging
 		event happens each time a page is unaccounted from the cgroup.
-swap		- # of bytes of swap usage
-dirty		- # of bytes that are waiting to get written back to the disk.
-writeback	- # of bytes of file/anon cache that are queued for syncing to
+swap		# of bytes of swap usage
+dirty		# of bytes that are waiting to get written back to the disk.
+writeback	# of bytes of file/anon cache that are queued for syncing to
 		disk.
-inactive_anon	- # of bytes of anonymous and swap cache memory on inactive
+inactive_anon	# of bytes of anonymous and swap cache memory on inactive
 		LRU list.
-active_anon	- # of bytes of anonymous and swap cache memory on active
+active_anon	# of bytes of anonymous and swap cache memory on active
 		LRU list.
-inactive_file	- # of bytes of file-backed memory on inactive LRU list.
-active_file	- # of bytes of file-backed memory on active LRU list.
-unevictable	- # of bytes of memory that cannot be reclaimed (mlocked etc).
+inactive_file	# of bytes of file-backed memory on inactive LRU list.
+active_file	# of bytes of file-backed memory on active LRU list.
+unevictable	# of bytes of memory that cannot be reclaimed (mlocked etc).
+=============== ===============================================================
 
-# status considering hierarchy (see memory.use_hierarchy settings)
+status considering hierarchy (see memory.use_hierarchy settings)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-hierarchical_memory_limit - # of bytes of memory limit with regard to hierarchy
-			under which the memory cgroup is
-hierarchical_memsw_limit - # of bytes of memory+swap limit with regard to
-			hierarchy under which memory cgroup is.
+========================= ===================================================
+hierarchical_memory_limit # of bytes of memory limit with regard to hierarchy
+			  under which the memory cgroup is
+hierarchical_memsw_limit  # of bytes of memory+swap limit with regard to
+			  hierarchy under which memory cgroup is.
 
-total_<counter>		- # hierarchical version of <counter>, which in
-			addition to the cgroup's own value includes the
-			sum of all hierarchical children's values of
-			<counter>, i.e. total_cache
+total_<counter>		  # hierarchical version of <counter>, which in
+			  addition to the cgroup's own value includes the
+			  sum of all hierarchical children's values of
+			  <counter>, i.e. total_cache
+========================= ===================================================
 
-# The following additional stats are dependent on CONFIG_DEBUG_VM.
+The following additional stats are dependent on CONFIG_DEBUG_VM
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-recent_rotated_anon	- VM internal parameter. (see mm/vmscan.c)
-recent_rotated_file	- VM internal parameter. (see mm/vmscan.c)
-recent_scanned_anon	- VM internal parameter. (see mm/vmscan.c)
-recent_scanned_file	- VM internal parameter. (see mm/vmscan.c)
+========================= ========================================
+recent_rotated_anon	  VM internal parameter. (see mm/vmscan.c)
+recent_rotated_file	  VM internal parameter. (see mm/vmscan.c)
+recent_scanned_anon	  VM internal parameter. (see mm/vmscan.c)
+recent_scanned_file	  VM internal parameter. (see mm/vmscan.c)
+========================= ========================================
 
 Memo:
 	recent_rotated means recent frequency of LRU rotation.
@@ -525,12 +598,15 @@ Note:
 	Only anonymous and swap cache memory is listed as part of 'rss' stat.
 	This should not be confused with the true 'resident set size' or the
 	amount of physical memory used by the cgroup.
+
 	'rss + mapped_file" will give you resident set size of cgroup.
+
 	(Note: file and shmem may be shared among other cgroups. In that case,
-	 mapped_file is accounted only when the memory cgroup is owner of page
-	 cache.)
+	mapped_file is accounted only when the memory cgroup is owner of page
+	cache.)
 
 5.3 swappiness
+--------------
 
 Overrides /proc/sys/vm/swappiness for the particular group. The tunable
 in the root cgroup corresponds to the global swappiness setting.
@@ -541,16 +617,19 @@ there is a swap storage available. This might lead to memcg OOM killer
 if there are no file pages to reclaim.
 
 5.4 failcnt
+-----------
 
 A memory cgroup provides memory.failcnt and memory.memsw.failcnt files.
 This failcnt(== failure count) shows the number of times that a usage counter
 hit its limit. When a memory cgroup hits a limit, failcnt increases and
 memory under it will be reclaimed.
 
-You can reset failcnt by writing 0 to failcnt file.
-# echo 0 > .../memory.failcnt
+You can reset failcnt by writing 0 to failcnt file::
+
+	# echo 0 > .../memory.failcnt
 
 5.5 usage_in_bytes
+------------------
 
 For efficiency, as other kernel components, memory cgroup uses some optimization
 to avoid unnecessary cacheline false sharing. usage_in_bytes is affected by the
@@ -560,6 +639,7 @@ If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP)
 value in memory.stat(see 5.2).
 
 5.6 numa_stat
+-------------
 
 This is similar to numa_maps but operates on a per-memcg basis.  This is
 useful for providing visibility into the numa locality information within
@@ -571,22 +651,23 @@ Each memcg's numa_stat file includes "total", "file", "anon" and "unevictable"
 per-node page counts including "hierarchical_<counter>" which sums up all
 hierarchical children's values in addition to the memcg's own value.
 
-The output format of memory.numa_stat is:
+The output format of memory.numa_stat is::
 
-total=<total pages> N0=<node 0 pages> N1=<node 1 pages> ...
-file=<total file pages> N0=<node 0 pages> N1=<node 1 pages> ...
-anon=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
-unevictable=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
-hierarchical_<counter>=<counter pages> N0=<node 0 pages> N1=<node 1 pages> ...
+  total=<total pages> N0=<node 0 pages> N1=<node 1 pages> ...
+  file=<total file pages> N0=<node 0 pages> N1=<node 1 pages> ...
+  anon=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
+  unevictable=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
+  hierarchical_<counter>=<counter pages> N0=<node 0 pages> N1=<node 1 pages> ...
 
 The "total" count is sum of file + anon + unevictable.
 
 6. Hierarchy support
+====================
 
 The memory controller supports a deep hierarchy and hierarchical accounting.
 The hierarchy is created by creating the appropriate cgroups in the
 cgroup filesystem. Consider for example, the following cgroup filesystem
-hierarchy
+hierarchy::
 
 	       root
 	     /  |   \
@@ -603,24 +684,28 @@ limit, the reclaim algorithm reclaims from the tasks in the ancestor and the
 children of the ancestor.
 
 6.1 Enabling hierarchical accounting and reclaim
+------------------------------------------------
 
 A memory cgroup by default disables the hierarchy feature. Support
-can be enabled by writing 1 to memory.use_hierarchy file of the root cgroup
+can be enabled by writing 1 to memory.use_hierarchy file of the root cgroup::
 
-# echo 1 > memory.use_hierarchy
+	# echo 1 > memory.use_hierarchy
 
-The feature can be disabled by
+The feature can be disabled by::
 
-# echo 0 > memory.use_hierarchy
+	# echo 0 > memory.use_hierarchy
 
-NOTE1: Enabling/disabling will fail if either the cgroup already has other
+NOTE1:
+       Enabling/disabling will fail if either the cgroup already has other
        cgroups created below it, or if the parent cgroup has use_hierarchy
        enabled.
 
-NOTE2: When panic_on_oom is set to "2", the whole system will panic in
+NOTE2:
+       When panic_on_oom is set to "2", the whole system will panic in
        case of an OOM event in any cgroup.
 
 7. Soft limits
+==============
 
 Soft limits allow for greater sharing of memory. The idea behind soft limits
 is to allow control groups to use as much of the memory as needed, provided
@@ -640,22 +725,26 @@ hints/setup. Currently soft limit based reclaim is set up such that
 it gets invoked from balance_pgdat (kswapd).
 
 7.1 Interface
+-------------
 
 Soft limits can be setup by using the following commands (in this example we
-assume a soft limit of 256 MiB)
+assume a soft limit of 256 MiB)::
 
-# echo 256M > memory.soft_limit_in_bytes
+	# echo 256M > memory.soft_limit_in_bytes
 
-If we want to change this to 1G, we can at any time use
+If we want to change this to 1G, we can at any time use::
 
-# echo 1G > memory.soft_limit_in_bytes
+	# echo 1G > memory.soft_limit_in_bytes
 
-NOTE1: Soft limits take effect over a long period of time, since they involve
+NOTE1:
+       Soft limits take effect over a long period of time, since they involve
        reclaiming memory for balancing between memory cgroups
-NOTE2: It is recommended to set the soft limit always below the hard limit,
+NOTE2:
+       It is recommended to set the soft limit always below the hard limit,
        otherwise the hard limit will take precedence.
 
 8. Move charges at task migration
+=================================
 
 Users can move charges associated with a task along with task migration, that
 is, uncharge task's pages from the old cgroup and charge them to the new cgroup.
@@ -663,60 +752,71 @@ This feature is not supported in !CONFIG_MMU environments because of lack of
 page tables.
 
 8.1 Interface
+-------------
 
 This feature is disabled by default. It can be enabled (and disabled again) by
 writing to memory.move_charge_at_immigrate of the destination cgroup.
 
-If you want to enable it:
+If you want to enable it::
 
-# echo (some positive value) > memory.move_charge_at_immigrate
+	# echo (some positive value) > memory.move_charge_at_immigrate
 
-Note: Each bits of move_charge_at_immigrate has its own meaning about what type
+Note:
+      Each bits of move_charge_at_immigrate has its own meaning about what type
       of charges should be moved. See 8.2 for details.
-Note: Charges are moved only when you move mm->owner, in other words,
+Note:
+      Charges are moved only when you move mm->owner, in other words,
       a leader of a thread group.
-Note: If we cannot find enough space for the task in the destination cgroup, we
+Note:
+      If we cannot find enough space for the task in the destination cgroup, we
       try to make space by reclaiming memory. Task migration may fail if we
       cannot make enough space.
-Note: It can take several seconds if you move charges much.
+Note:
+      It can take several seconds if you move charges much.
 
-And if you want disable it again:
+And if you want disable it again::
 
-# echo 0 > memory.move_charge_at_immigrate
+	# echo 0 > memory.move_charge_at_immigrate
 
 8.2 Type of charges which can be moved
+--------------------------------------
 
 Each bit in move_charge_at_immigrate has its own meaning about what type of
 charges should be moved. But in any case, it must be noted that an account of
 a page or a swap can be moved only when it is charged to the task's current
 (old) memory cgroup.
 
-  bit | what type of charges would be moved ?
- -----+------------------------------------------------------------------------
-   0  | A charge of an anonymous page (or swap of it) used by the target task.
-      | You must enable Swap Extension (see 2.4) to enable move of swap charges.
- -----+------------------------------------------------------------------------
-   1  | A charge of file pages (normal file, tmpfs file (e.g. ipc shared memory)
-      | and swaps of tmpfs file) mmapped by the target task. Unlike the case of
-      | anonymous pages, file pages (and swaps) in the range mmapped by the task
-      | will be moved even if the task hasn't done page fault, i.e. they might
-      | not be the task's "RSS", but other task's "RSS" that maps the same file.
-      | And mapcount of the page is ignored (the page can be moved even if
-      | page_mapcount(page) > 1). You must enable Swap Extension (see 2.4) to
-      | enable move of swap charges.
++---+--------------------------------------------------------------------------+
+|bit| what type of charges would be moved ?                                    |
++===+==========================================================================+
+| 0 | A charge of an anonymous page (or swap of it) used by the target task.   |
+|   | You must enable Swap Extension (see 2.4) to enable move of swap charges. |
++---+--------------------------------------------------------------------------+
+| 1 | A charge of file pages (normal file, tmpfs file (e.g. ipc shared memory) |
+|   | and swaps of tmpfs file) mmapped by the target task. Unlike the case of  |
+|   | anonymous pages, file pages (and swaps) in the range mmapped by the task |
+|   | will be moved even if the task hasn't done page fault, i.e. they might   |
+|   | not be the task's "RSS", but other task's "RSS" that maps the same file. |
+|   | And mapcount of the page is ignored (the page can be moved even if       |
+|   | page_mapcount(page) > 1). You must enable Swap Extension (see 2.4) to    |
+|   | enable move of swap charges.                                             |
++---+--------------------------------------------------------------------------+
 
 8.3 TODO
+--------
 
 - All of moving charge operations are done under cgroup_mutex. It's not good
   behavior to hold the mutex too long, so we may need some trick.
 
 9. Memory thresholds
+====================
 
 Memory cgroup implements memory thresholds using the cgroups notification
 API (see cgroups.txt). It allows to register multiple memory and memsw
 thresholds and gets notifications when it crosses.
 
 To register a threshold, an application must:
+
 - create an eventfd using eventfd(2);
 - open memory.usage_in_bytes or memory.memsw.usage_in_bytes;
 - write string like "<event_fd> <fd of memory.usage_in_bytes> <threshold>" to
@@ -728,6 +828,7 @@ threshold in any direction.
 It's applicable for root and non-root cgroup.
 
 10. OOM Control
+===============
 
 memory.oom_control file is for OOM notification and other controls.
 
@@ -736,6 +837,7 @@ API (See cgroups.txt). It allows to register multiple OOM notification
 delivery and gets notification when OOM happens.
 
 To register a notifier, an application must:
+
  - create an eventfd using eventfd(2)
  - open memory.oom_control file
  - write string like "<event_fd> <fd of memory.oom_control>" to
@@ -752,8 +854,11 @@ If OOM-killer is disabled, tasks under cgroup will hang/sleep
 in memory cgroup's OOM-waitqueue when they request accountable memory.
 
 For running them, you have to relax the memory cgroup's OOM status by
+
 	* enlarge limit or reduce usage.
+
 To reduce usage,
+
 	* kill some tasks.
 	* move some tasks to other group with account migration.
 	* remove some files (on tmpfs?)
@@ -761,11 +866,14 @@ To reduce usage,
 Then, stopped tasks will work again.
 
 At reading, current status of OOM is shown.
-	oom_kill_disable 0 or 1 (if 1, oom-killer is disabled)
-	under_oom	 0 or 1 (if 1, the memory cgroup is under OOM, tasks may
-				 be stopped.)
+
+	- oom_kill_disable 0 or 1
+	  (if 1, oom-killer is disabled)
+	- under_oom	   0 or 1
+	  (if 1, the memory cgroup is under OOM, tasks may be stopped.)
 
 11. Memory Pressure
+===================
 
 The pressure level notifications can be used to monitor the memory
 allocation cost; based on the pressure, applications can implement
@@ -840,21 +948,22 @@ Test:
 
    Here is a small script example that makes a new cgroup, sets up a
    memory limit, sets up a notification in the cgroup and then makes child
-   cgroup experience a critical pressure:
+   cgroup experience a critical pressure::
 
-   # cd /sys/fs/cgroup/memory/
-   # mkdir foo
-   # cd foo
-   # cgroup_event_listener memory.pressure_level low,hierarchy &
-   # echo 8000000 > memory.limit_in_bytes
-   # echo 8000000 > memory.memsw.limit_in_bytes
-   # echo $$ > tasks
-   # dd if=/dev/zero | read x
+	# cd /sys/fs/cgroup/memory/
+	# mkdir foo
+	# cd foo
+	# cgroup_event_listener memory.pressure_level low,hierarchy &
+	# echo 8000000 > memory.limit_in_bytes
+	# echo 8000000 > memory.memsw.limit_in_bytes
+	# echo $$ > tasks
+	# dd if=/dev/zero | read x
 
    (Expect a bunch of notifications, and eventually, the oom-killer will
    trigger.)
 
 12. TODO
+========
 
 1. Make per-cgroup scanner reclaim not-shared pages first
 2. Teach controller to account for shared-pages
@@ -862,11 +971,13 @@ Test:
    not yet hit but the usage is getting closer
 
 Summary
+=======
 
 Overall, the memory controller has been a stable controller and has been
 commented and discussed quite extensively in the community.
 
 References
+==========
 
 1. Singh, Balbir. RFC: Memory Controller, http://lwn.net/Articles/206697/
 2. Singh, Balbir. Memory Controller (RSS Control),
diff --git a/Documentation/cgroup-v1/net_cls.txt b/Documentation/cgroup-v1/net_cls.rst
similarity index 50%
rename from Documentation/cgroup-v1/net_cls.txt
rename to Documentation/cgroup-v1/net_cls.rst
index ec182346dea2..a2cf272af7a0 100644
--- a/Documentation/cgroup-v1/net_cls.txt
+++ b/Documentation/cgroup-v1/net_cls.rst
@@ -1,5 +1,6 @@
+=========================
 Network classifier cgroup
--------------------------
+=========================
 
 The Network classifier cgroup provides an interface to
 tag network packets with a class identifier (classid).
@@ -17,23 +18,27 @@ values is 0xAAAABBBB; AAAA is the major handle number and BBBB
 is the minor handle number.
 Reading net_cls.classid yields a decimal result.
 
-Example:
-mkdir /sys/fs/cgroup/net_cls
-mount -t cgroup -onet_cls net_cls /sys/fs/cgroup/net_cls
-mkdir /sys/fs/cgroup/net_cls/0
-echo 0x100001 >  /sys/fs/cgroup/net_cls/0/net_cls.classid
-	- setting a 10:1 handle.
+Example::
 
-cat /sys/fs/cgroup/net_cls/0/net_cls.classid
-1048577
+	mkdir /sys/fs/cgroup/net_cls
+	mount -t cgroup -onet_cls net_cls /sys/fs/cgroup/net_cls
+	mkdir /sys/fs/cgroup/net_cls/0
+	echo 0x100001 >  /sys/fs/cgroup/net_cls/0/net_cls.classid
 
-configuring tc:
-tc qdisc add dev eth0 root handle 10: htb
+- setting a 10:1 handle::
 
-tc class add dev eth0 parent 10: classid 10:1 htb rate 40mbit
- - creating traffic class 10:1
+	cat /sys/fs/cgroup/net_cls/0/net_cls.classid
+	1048577
 
-tc filter add dev eth0 parent 10: protocol ip prio 10 handle 1: cgroup
+- configuring tc::
 
-configuring iptables, basic example:
-iptables -A OUTPUT -m cgroup ! --cgroup 0x100001 -j DROP
+	tc qdisc add dev eth0 root handle 10: htb
+	tc class add dev eth0 parent 10: classid 10:1 htb rate 40mbit
+
+- creating traffic class 10:1::
+
+	tc filter add dev eth0 parent 10: protocol ip prio 10 handle 1: cgroup
+
+configuring iptables, basic example::
+
+	iptables -A OUTPUT -m cgroup ! --cgroup 0x100001 -j DROP
diff --git a/Documentation/cgroup-v1/net_prio.txt b/Documentation/cgroup-v1/net_prio.rst
similarity index 71%
rename from Documentation/cgroup-v1/net_prio.txt
rename to Documentation/cgroup-v1/net_prio.rst
index a82cbd28ea8a..b40905871c64 100644
--- a/Documentation/cgroup-v1/net_prio.txt
+++ b/Documentation/cgroup-v1/net_prio.rst
@@ -1,5 +1,6 @@
+=======================
 Network priority cgroup
--------------------------
+=======================
 
 The Network priority cgroup provides an interface to allow an administrator to
 dynamically set the priority of network traffic generated by various
@@ -14,9 +15,9 @@ SO_PRIORITY socket option.  This however, is not always possible because:
 
 This cgroup allows an administrator to assign a process to a group which defines
 the priority of egress traffic on a given interface. Network priority groups can
-be created by first mounting the cgroup filesystem.
+be created by first mounting the cgroup filesystem::
 
-# mount -t cgroup -onet_prio none /sys/fs/cgroup/net_prio
+	# mount -t cgroup -onet_prio none /sys/fs/cgroup/net_prio
 
 With the above step, the initial group acting as the parent accounting group
 becomes visible at '/sys/fs/cgroup/net_prio'.  This group includes all tasks in
@@ -25,17 +26,18 @@ the system. '/sys/fs/cgroup/net_prio/tasks' lists the tasks in this cgroup.
 Each net_prio cgroup contains two files that are subsystem specific
 
 net_prio.prioidx
-This file is read-only, and is simply informative.  It contains a unique integer
-value that the kernel uses as an internal representation of this cgroup.
+  This file is read-only, and is simply informative.  It contains a unique
+  integer value that the kernel uses as an internal representation of this
+  cgroup.
 
 net_prio.ifpriomap
-This file contains a map of the priorities assigned to traffic originating from
-processes in this group and egressing the system on various interfaces. It
-contains a list of tuples in the form <ifname priority>.  Contents of this file
-can be modified by echoing a string into the file using the same tuple format.
-for example:
+  This file contains a map of the priorities assigned to traffic originating
+  from processes in this group and egressing the system on various interfaces.
+  It contains a list of tuples in the form <ifname priority>.  Contents of this
+  file can be modified by echoing a string into the file using the same tuple
+  format. For example::
 
-echo "eth0 5" > /sys/fs/cgroups/net_prio/iscsi/net_prio.ifpriomap
+	echo "eth0 5" > /sys/fs/cgroups/net_prio/iscsi/net_prio.ifpriomap
 
 This command would force any traffic originating from processes belonging to the
 iscsi net_prio cgroup and egressing on interface eth0 to have the priority of
diff --git a/Documentation/cgroup-v1/pids.txt b/Documentation/cgroup-v1/pids.rst
similarity index 62%
rename from Documentation/cgroup-v1/pids.txt
rename to Documentation/cgroup-v1/pids.rst
index e105d708ccde..6acebd9e72c8 100644
--- a/Documentation/cgroup-v1/pids.txt
+++ b/Documentation/cgroup-v1/pids.rst
@@ -1,5 +1,6 @@
-						   Process Number Controller
-						   =========================
+=========================
+Process Number Controller
+=========================
 
 Abstract
 --------
@@ -34,55 +35,58 @@ pids.current tracks all child cgroup hierarchies, so parent/pids.current is a
 superset of parent/child/pids.current.
 
 The pids.events file contains event counters:
+
   - max: Number of times fork failed because limit was hit.
 
 Example
 -------
 
-First, we mount the pids controller:
-# mkdir -p /sys/fs/cgroup/pids
-# mount -t cgroup -o pids none /sys/fs/cgroup/pids
+First, we mount the pids controller::
 
-Then we create a hierarchy, set limits and attach processes to it:
-# mkdir -p /sys/fs/cgroup/pids/parent/child
-# echo 2 > /sys/fs/cgroup/pids/parent/pids.max
-# echo $$ > /sys/fs/cgroup/pids/parent/cgroup.procs
-# cat /sys/fs/cgroup/pids/parent/pids.current
-2
-#
+	# mkdir -p /sys/fs/cgroup/pids
+	# mount -t cgroup -o pids none /sys/fs/cgroup/pids
+
+Then we create a hierarchy, set limits and attach processes to it::
+
+	# mkdir -p /sys/fs/cgroup/pids/parent/child
+	# echo 2 > /sys/fs/cgroup/pids/parent/pids.max
+	# echo $$ > /sys/fs/cgroup/pids/parent/cgroup.procs
+	# cat /sys/fs/cgroup/pids/parent/pids.current
+	2
+	#
 
 It should be noted that attempts to overcome the set limit (2 in this case) will
-fail:
+fail::
 
-# cat /sys/fs/cgroup/pids/parent/pids.current
-2
-# ( /bin/echo "Here's some processes for you." | cat )
-sh: fork: Resource temporary unavailable
-#
+	# cat /sys/fs/cgroup/pids/parent/pids.current
+	2
+	# ( /bin/echo "Here's some processes for you." | cat )
+	sh: fork: Resource temporary unavailable
+	#
 
 Even if we migrate to a child cgroup (which doesn't have a set limit), we will
 not be able to overcome the most stringent limit in the hierarchy (in this case,
-parent's):
+parent's)::
 
-# echo $$ > /sys/fs/cgroup/pids/parent/child/cgroup.procs
-# cat /sys/fs/cgroup/pids/parent/pids.current
-2
-# cat /sys/fs/cgroup/pids/parent/child/pids.current
-2
-# cat /sys/fs/cgroup/pids/parent/child/pids.max
-max
-# ( /bin/echo "Here's some processes for you." | cat )
-sh: fork: Resource temporary unavailable
-#
+	# echo $$ > /sys/fs/cgroup/pids/parent/child/cgroup.procs
+	# cat /sys/fs/cgroup/pids/parent/pids.current
+	2
+	# cat /sys/fs/cgroup/pids/parent/child/pids.current
+	2
+	# cat /sys/fs/cgroup/pids/parent/child/pids.max
+	max
+	# ( /bin/echo "Here's some processes for you." | cat )
+	sh: fork: Resource temporary unavailable
+	#
 
 We can set a limit that is smaller than pids.current, which will stop any new
 processes from being forked at all (note that the shell itself counts towards
-pids.current):
+pids.current)::
 
-# echo 1 > /sys/fs/cgroup/pids/parent/pids.max
-# /bin/echo "We can't even spawn a single process now."
-sh: fork: Resource temporary unavailable
-# echo 0 > /sys/fs/cgroup/pids/parent/pids.max
-# /bin/echo "We can't even spawn a single process now."
-sh: fork: Resource temporary unavailable
-#
+	# echo 1 > /sys/fs/cgroup/pids/parent/pids.max
+	# /bin/echo "We can't even spawn a single process now."
+	sh: fork: Resource temporary unavailable
+	# echo 0 > /sys/fs/cgroup/pids/parent/pids.max
+	# /bin/echo "We can't even spawn a single process now."
+	sh: fork: Resource temporary unavailable
+	#
diff --git a/Documentation/cgroup-v1/rdma.txt b/Documentation/cgroup-v1/rdma.rst
similarity index 79%
rename from Documentation/cgroup-v1/rdma.txt
rename to Documentation/cgroup-v1/rdma.rst
index 9bdb7fd03f83..2fcb0a9bf790 100644
--- a/Documentation/cgroup-v1/rdma.txt
+++ b/Documentation/cgroup-v1/rdma.rst
@@ -1,16 +1,17 @@
-				RDMA Controller
-				----------------
+===============
+RDMA Controller
+===============
 
-Contents
---------
+.. Contents
 
-1. Overview
-  1-1. What is RDMA controller?
-  1-2. Why RDMA controller needed?
-  1-3. How is RDMA controller implemented?
-2. Usage Examples
+   1. Overview
+     1-1. What is RDMA controller?
+     1-2. Why RDMA controller needed?
+     1-3. How is RDMA controller implemented?
+   2. Usage Examples
 
 1. Overview
+===========
 
 1-1. What is RDMA controller?
 -----------------------------
@@ -83,27 +84,34 @@ what is configured by user for a given cgroup and what is supported by
 IB device.
 
 Following resources can be accounted by rdma controller.
+
+  ==========    =============================
   hca_handle	Maximum number of HCA Handles
   hca_object 	Maximum number of HCA Objects
+  ==========    =============================
 
 2. Usage Examples
------------------
-
-(a) Configure resource limit:
-echo mlx4_0 hca_handle=2 hca_object=2000 > /sys/fs/cgroup/rdma/1/rdma.max
-echo ocrdma1 hca_handle=3 > /sys/fs/cgroup/rdma/2/rdma.max
-
-(b) Query resource limit:
-cat /sys/fs/cgroup/rdma/2/rdma.max
-#Output:
-mlx4_0 hca_handle=2 hca_object=2000
-ocrdma1 hca_handle=3 hca_object=max
-
-(c) Query current usage:
-cat /sys/fs/cgroup/rdma/2/rdma.current
-#Output:
-mlx4_0 hca_handle=1 hca_object=20
-ocrdma1 hca_handle=1 hca_object=23
-
-(d) Delete resource limit:
-echo echo mlx4_0 hca_handle=max hca_object=max > /sys/fs/cgroup/rdma/1/rdma.max
+=================
+
+(a) Configure resource limit::
+
+	echo mlx4_0 hca_handle=2 hca_object=2000 > /sys/fs/cgroup/rdma/1/rdma.max
+	echo ocrdma1 hca_handle=3 > /sys/fs/cgroup/rdma/2/rdma.max
+
+(b) Query resource limit::
+
+	cat /sys/fs/cgroup/rdma/2/rdma.max
+	#Output:
+	mlx4_0 hca_handle=2 hca_object=2000
+	ocrdma1 hca_handle=3 hca_object=max
+
+(c) Query current usage::
+
+	cat /sys/fs/cgroup/rdma/2/rdma.current
+	#Output:
+	mlx4_0 hca_handle=1 hca_object=20
+	ocrdma1 hca_handle=1 hca_object=23
+
+(d) Delete resource limit::
+
+	echo echo mlx4_0 hca_handle=max hca_object=max > /sys/fs/cgroup/rdma/1/rdma.max
diff --git a/Documentation/filesystems/tmpfs.txt b/Documentation/filesystems/tmpfs.txt
index d06e9a59a9f4..cad797a8a39e 100644
--- a/Documentation/filesystems/tmpfs.txt
+++ b/Documentation/filesystems/tmpfs.txt
@@ -98,7 +98,7 @@ A memory policy with a valid NodeList will be saved, as specified, for
 use at file creation time.  When a task allocates a file in the file
 system, the mount option memory policy will be applied with a NodeList,
 if any, modified by the calling task's cpuset constraints
-[See Documentation/cgroup-v1/cpusets.txt] and any optional flags, listed
+[See Documentation/cgroup-v1/cpusets.rst] and any optional flags, listed
 below.  If the resulting NodeLists is the empty set, the effective memory
 policy for the file will revert to "default" policy.
 
diff --git a/Documentation/scheduler/sched-deadline.txt b/Documentation/scheduler/sched-deadline.txt
index b14e03ff3528..a7514343b660 100644
--- a/Documentation/scheduler/sched-deadline.txt
+++ b/Documentation/scheduler/sched-deadline.txt
@@ -652,7 +652,7 @@ CONTENTS
 
  -deadline tasks cannot have an affinity mask smaller that the entire
  root_domain they are created on. However, affinities can be specified
- through the cpuset facility (Documentation/cgroup-v1/cpusets.txt).
+ through the cpuset facility (Documentation/cgroup-v1/cpusets.rst).
 
 5.1 SCHED_DEADLINE and cpusets HOWTO
 ------------------------------------
diff --git a/Documentation/scheduler/sched-design-CFS.txt b/Documentation/scheduler/sched-design-CFS.txt
index edd861c94c1b..d1328890ef28 100644
--- a/Documentation/scheduler/sched-design-CFS.txt
+++ b/Documentation/scheduler/sched-design-CFS.txt
@@ -215,7 +215,7 @@ SCHED_BATCH) tasks.
 
    These options need CONFIG_CGROUPS to be defined, and let the administrator
    create arbitrary groups of tasks, using the "cgroup" pseudo filesystem.  See
-   Documentation/cgroup-v1/cgroups.txt for more information about this filesystem.
+   Documentation/cgroup-v1/cgroups.rst for more information about this filesystem.
 
 When CONFIG_FAIR_GROUP_SCHED is defined, a "cpu.shares" file is created for each
 group created using the pseudo filesystem.  See example steps below to create
diff --git a/Documentation/scheduler/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt
index d8fce3e78457..c09f7a3fee66 100644
--- a/Documentation/scheduler/sched-rt-group.txt
+++ b/Documentation/scheduler/sched-rt-group.txt
@@ -133,7 +133,7 @@ This uses the cgroup virtual file system and "<cgroup>/cpu.rt_runtime_us"
 to control the CPU time reserved for each control group.
 
 For more information on working with control groups, you should read
-Documentation/cgroup-v1/cgroups.txt as well.
+Documentation/cgroup-v1/cgroups.rst as well.
 
 Group settings are checked against the following limits in order to keep the
 configuration schedulable:
diff --git a/Documentation/vm/numa.rst b/Documentation/vm/numa.rst
index 5cae13e9a08b..0d830edae8fe 100644
--- a/Documentation/vm/numa.rst
+++ b/Documentation/vm/numa.rst
@@ -67,7 +67,7 @@ nodes.  Each emulated node will manage a fraction of the underlying cells'
 physical memory.  NUMA emluation is useful for testing NUMA kernel and
 application features on non-NUMA platforms, and as a sort of memory resource
 management mechanism when used together with cpusets.
-[see Documentation/cgroup-v1/cpusets.txt]
+[see Documentation/cgroup-v1/cpusets.rst]
 
 For each node with memory, Linux constructs an independent memory management
 subsystem, complete with its own free page lists, in-use page lists, usage
@@ -114,7 +114,7 @@ allocation behavior using Linux NUMA memory policy. [see
 
 System administrators can restrict the CPUs and nodes' memories that a non-
 privileged user can specify in the scheduling or NUMA commands and functions
-using control groups and CPUsets.  [see Documentation/cgroup-v1/cpusets.txt]
+using control groups and CPUsets.  [see Documentation/cgroup-v1/cpusets.rst]
 
 On architectures that do not hide memoryless nodes, Linux will include only
 zones [nodes] with memory in the zonelists.  This means that for a memoryless
diff --git a/Documentation/vm/page_migration.rst b/Documentation/vm/page_migration.rst
index f68d61335abb..35bba27d5fff 100644
--- a/Documentation/vm/page_migration.rst
+++ b/Documentation/vm/page_migration.rst
@@ -41,7 +41,7 @@ locations.
 Larger installations usually partition the system using cpusets into
 sections of nodes. Paul Jackson has equipped cpusets with the ability to
 move pages when a task is moved to another cpuset (See
-Documentation/cgroup-v1/cpusets.txt).
+Documentation/cgroup-v1/cpusets.rst).
 Cpusets allows the automation of process locality. If a task is moved to
 a new cpuset then also all its pages are moved with it so that the
 performance of the process does not sink dramatically. Also the pages
diff --git a/Documentation/vm/unevictable-lru.rst b/Documentation/vm/unevictable-lru.rst
index b8e29f977f2d..c6d94118fbcc 100644
--- a/Documentation/vm/unevictable-lru.rst
+++ b/Documentation/vm/unevictable-lru.rst
@@ -98,7 +98,7 @@ Memory Control Group Interaction
 --------------------------------
 
 The unevictable LRU facility interacts with the memory control group [aka
-memory controller; see Documentation/cgroup-v1/memory.txt] by extending the
+memory controller; see Documentation/cgroup-v1/memory.rst] by extending the
 lru_list enum.
 
 The memory controller data structure automatically gets a per-zone unevictable
diff --git a/Documentation/x86/x86_64/fake-numa-for-cpusets b/Documentation/x86/x86_64/fake-numa-for-cpusets
index 4b09f18831f8..10b73bbea8eb 100644
--- a/Documentation/x86/x86_64/fake-numa-for-cpusets
+++ b/Documentation/x86/x86_64/fake-numa-for-cpusets
@@ -8,7 +8,7 @@ assign them to cpusets and their attached tasks.  This is a way of limiting the
 amount of system memory that are available to a certain class of tasks.
 
 For more information on the features of cpusets, see
-Documentation/cgroup-v1/cpusets.txt.
+Documentation/cgroup-v1/cpusets.rst.
 There are a number of different configurations you can use for your needs.  For
 more information on the numa=fake command line option and its various ways of
 configuring fake nodes, see Documentation/x86/x86_64/boot-options.txt.
@@ -33,7 +33,7 @@ A machine may be split as follows with "numa=fake=4*512," as reported by dmesg:
 	On node 3 totalpages: 131072
 
 Now following the instructions for mounting the cpusets filesystem from
-Documentation/cgroup-v1/cpusets.txt, you can assign fake nodes (i.e. contiguous memory
+Documentation/cgroup-v1/cpusets.rst, you can assign fake nodes (i.e. contiguous memory
 address spaces) to individual cpusets:
 
 	[root@xroads /]# mkdir exampleset
diff --git a/MAINTAINERS b/MAINTAINERS
index c8eebc8da565..1595b65e5249 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4053,7 +4053,7 @@ W:	http://www.bullopensource.org/cpuset/
 W:	http://oss.sgi.com/projects/cpusets/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git
 S:	Maintained
-F:	Documentation/cgroup-v1/cpusets.txt
+F:	Documentation/cgroup-v1/cpusets.rst
 F:	include/linux/cpuset.h
 F:	kernel/cgroup/cpuset.c
 
diff --git a/block/Kconfig b/block/Kconfig
index 1b220101a9cb..78374cb03114 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -88,7 +88,7 @@ config BLK_DEV_THROTTLING
 	one needs to mount and use blkio cgroup controller for creating
 	cgroups and specifying per device IO rate policies.
 
-	See Documentation/cgroup-v1/blkio-controller.txt for more information.
+	See Documentation/cgroup-v1/blkio-controller.rst for more information.
 
 config BLK_DEV_THROTTLING_LOW
 	bool "Block throttling .low limit interface support (EXPERIMENTAL)"
diff --git a/include/linux/cgroup-defs.h b/include/linux/cgroup-defs.h
index 53669fdd5fad..380a8f2d8e02 100644
--- a/include/linux/cgroup-defs.h
+++ b/include/linux/cgroup-defs.h
@@ -590,7 +590,7 @@ struct cftype {
 
 /*
  * Control Group subsystem type.
- * See Documentation/cgroup-v1/cgroups.txt for details
+ * See Documentation/cgroup-v1/cgroups.rst for details
  */
 struct cgroup_subsys {
 	struct cgroup_subsys_state *(*css_alloc)(struct cgroup_subsys_state *parent_css);
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index eaf2d3284248..b8e159a7fdf1 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -781,7 +781,7 @@ union bpf_attr {
  * 		based on a user-provided identifier for all traffic coming from
  * 		the tasks belonging to the related cgroup. See also the related
  * 		kernel documentation, available from the Linux sources in file
- * 		*Documentation/cgroup-v1/net_cls.txt*.
+ * 		*Documentation/cgroup-v1/net_cls.rst*.
  *
  * 		The Linux kernel has two versions for cgroups: there are
  * 		cgroups v1 and cgroups v2. Both are available to users, who can
diff --git a/init/Kconfig b/init/Kconfig
index b050890f69dc..9b52c958fd92 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -788,7 +788,7 @@ config BLK_CGROUP
 	CONFIG_CFQ_GROUP_IOSCHED=y; for enabling throttling policy, set
 	CONFIG_BLK_DEV_THROTTLING=y.
 
-	See Documentation/cgroup-v1/blkio-controller.txt for more information.
+	See Documentation/cgroup-v1/blkio-controller.rst for more information.
 
 config DEBUG_BLK_CGROUP
 	bool "IO controller debugging"
diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c
index 4834c4214e9c..44025fea3169 100644
--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -729,7 +729,7 @@ static inline int nr_cpusets(void)
  * load balancing domains (sched domains) as specified by that partial
  * partition.
  *
- * See "What is sched_load_balance" in Documentation/cgroup-v1/cpusets.txt
+ * See "What is sched_load_balance" in Documentation/cgroup-v1/cpusets.rst
  * for a background explanation of this.
  *
  * Does not return errors, on the theory that the callers of this
diff --git a/security/device_cgroup.c b/security/device_cgroup.c
index dc28914fa72e..c07196502577 100644
--- a/security/device_cgroup.c
+++ b/security/device_cgroup.c
@@ -509,7 +509,7 @@ static inline int may_allow_all(struct dev_cgroup *parent)
  * This is one of the three key functions for hierarchy implementation.
  * This function is responsible for re-evaluating all the cgroup's active
  * exceptions due to a parent's exception change.
- * Refer to Documentation/cgroup-v1/devices.txt for more details.
+ * Refer to Documentation/cgroup-v1/devices.rst for more details.
  */
 static void revalidate_active_exceptions(struct dev_cgroup *devcg)
 {
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 704bb69514a2..6d8bda1a5d68 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -781,7 +781,7 @@ union bpf_attr {
  * 		based on a user-provided identifier for all traffic coming from
  * 		the tasks belonging to the related cgroup. See also the related
  * 		kernel documentation, available from the Linux sources in file
- * 		*Documentation/cgroup-v1/net_cls.txt*.
+ * 		*Documentation/cgroup-v1/net_cls.rst*.
  *
  * 		The Linux kernel has two versions for cgroups: there are
  * 		cgroups v1 and cgroups v2. Both are available to users, who can
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 09/79] docs: cgroup-v1/blkio-controller.rst: add a note about CFQ scheduler
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (7 preceding siblings ...)
  2019-04-22 13:26   ` [PATCH v2 08/79] docs: cgroup-v1: " Mauro Carvalho Chehab
@ 2019-04-22 13:26   ` Mauro Carvalho Chehab
  2019-04-22 13:26   ` [PATCH v2 10/79] docs: cpu-freq: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
                     ` (68 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:26 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet

The CFQ scheduler was removed on this changeset:

  commit f382fb0bcef4c37dc049e9f6963e3baf204d815c
  Author: Jens Axboe <axboe@kernel.dk>
  Date:   Fri Oct 12 10:14:46 2018 -0600

    block: remove legacy IO schedulers

    Retain the deadline documentation, as that carries over to mq-deadline
    as well.

    Tested-by: Ming Lei <ming.lei@redhat.com>
    Reviewed-by: Omar Sandoval <osandov@fb.com>
    Signed-off-by: Jens Axboe <axboe@kernel.dk>

However, the cgroups-v1 documentation still mentions it and points
to a removed file that used to belong to such scheduler.

Add a note about that, as someone needs to fix the document pointing
to another scheduler, if cgroups-v1 blockio is not dependent of
CFQ scheduler.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/cgroup-v1/blkio-controller.rst | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/cgroup-v1/blkio-controller.rst b/Documentation/cgroup-v1/blkio-controller.rst
index 2c1b907afc14..2836c2c31e63 100644
--- a/Documentation/cgroup-v1/blkio-controller.rst
+++ b/Documentation/cgroup-v1/blkio-controller.rst
@@ -17,6 +17,13 @@ one is throttling policy which can be used to specify upper IO rate limits
 on devices. This policy is implemented in generic block layer and can be
 used on leaf nodes as well as higher level logical devices like device mapper.
 
+.. note::
+
+   While this document mentions the CFQ scheduler, it got removed at
+   Kernel 4.20, as there are other schedulers that are more efficient.
+
+   Someone needs to update this file in order to reflect such change.
+
 HOWTO
 =====
 Proportional Weight division of bandwidth
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 10/79] docs: cpu-freq: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (8 preceding siblings ...)
  2019-04-22 13:26   ` [PATCH v2 09/79] docs: cgroup-v1/blkio-controller.rst: add a note about CFQ scheduler Mauro Carvalho Chehab
@ 2019-04-22 13:26   ` Mauro Carvalho Chehab
  2019-04-23  8:21     ` Rafael J. Wysocki
  2019-04-22 13:27   ` [PATCH v2 11/79] docs: " Mauro Carvalho Chehab
                     ` (67 subsequent siblings)
  77 siblings, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:26 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Rafael J. Wysocki, Viresh Kumar, linux-pm

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../{amd-powernow.txt => amd-powernow.rst}    |  11 +-
 Documentation/cpu-freq/{core.txt => core.rst} |  66 +++---
 .../{cpu-drivers.txt => cpu-drivers.rst}      | 217 +++++++++---------
 ...pufreq-nforce2.txt => cpufreq-nforce2.rst} |  12 +-
 Documentation/cpu-freq/cpufreq-stats.rst      | 128 +++++++++++
 Documentation/cpu-freq/cpufreq-stats.txt      | 127 ----------
 Documentation/cpu-freq/index.rst              |  52 +++++
 Documentation/cpu-freq/index.txt              |  56 -----
 .../{pcc-cpufreq.txt => pcc-cpufreq.rst}      | 102 ++++----
 drivers/cpufreq/Kconfig.x86                   |   2 +-
 10 files changed, 391 insertions(+), 382 deletions(-)
 rename Documentation/cpu-freq/{amd-powernow.txt => amd-powernow.rst} (91%)
 rename Documentation/cpu-freq/{core.txt => core.rst} (67%)
 rename Documentation/cpu-freq/{cpu-drivers.txt => cpu-drivers.rst} (57%)
 rename Documentation/cpu-freq/{cpufreq-nforce2.txt => cpufreq-nforce2.rst} (65%)
 create mode 100644 Documentation/cpu-freq/cpufreq-stats.rst
 delete mode 100644 Documentation/cpu-freq/cpufreq-stats.txt
 create mode 100644 Documentation/cpu-freq/index.rst
 delete mode 100644 Documentation/cpu-freq/index.txt
 rename Documentation/cpu-freq/{pcc-cpufreq.txt => pcc-cpufreq.rst} (80%)

diff --git a/Documentation/cpu-freq/amd-powernow.txt b/Documentation/cpu-freq/amd-powernow.rst
similarity index 91%
rename from Documentation/cpu-freq/amd-powernow.txt
rename to Documentation/cpu-freq/amd-powernow.rst
index 254da155fa47..50b2c45c3a2c 100644
--- a/Documentation/cpu-freq/amd-powernow.txt
+++ b/Documentation/cpu-freq/amd-powernow.rst
@@ -1,3 +1,7 @@
+=============================
+AMD powernow driver specifics
+=============================
+
 
 PowerNow! and Cool'n'Quiet are AMD names for frequency
 management capabilities in AMD processors. As the hardware
@@ -23,16 +27,19 @@ not supply these tables.
 7th Generation: powernow-k7: Athlon, Duron, Geode.
 
 8th Generation: powernow-k8: Athlon, Athlon 64, Opteron, Sempron.
+
 Documentation on this functionality in 8th generation processors
 is available in the "BIOS and Kernel Developer's Guide", publication
-26094, in chapter 9, available for download from www.amd.com. 
+26094, in chapter 9, available for download from www.amd.com.
 
 BIOS supplied data, for powernow-k7 and for powernow-k8, may be
 from either the PSB table or from ACPI objects. The ACPI support
 is only available if the kernel config sets CONFIG_ACPI_PROCESSOR.
+
 The powernow-k8 driver will attempt to use ACPI if so configured,
 and fall back to PST if that fails.
+
 The powernow-k7 driver will try to use the PSB support first, and
 fall back to ACPI if the PSB support fails. A module parameter,
-acpi_force, is provided to force ACPI support to be used instead 
+acpi_force, is provided to force ACPI support to be used instead
 of PSB support.
diff --git a/Documentation/cpu-freq/core.txt b/Documentation/cpu-freq/core.rst
similarity index 67%
rename from Documentation/cpu-freq/core.txt
rename to Documentation/cpu-freq/core.rst
index 073f128af5a7..c719e3cb700c 100644
--- a/Documentation/cpu-freq/core.txt
+++ b/Documentation/cpu-freq/core.rst
@@ -1,31 +1,22 @@
-     CPU frequency and voltage scaling code in the Linux(TM) kernel
+================================================================
+General description of the CPUFreq core and of CPUFreq notifiers
+================================================================
 
+Authors:
+  - Dominik Brodowski  <linux@brodo.de>
+  - David Kimdon <dwhedon@debian.org>
+  - Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+  - Viresh Kumar <viresh.kumar@linaro.org>
 
-		         L i n u x    C P U F r e q
 
-			  C P U F r e q    C o r e
+.. Contents:
 
-
-		    Dominik Brodowski  <linux@brodo.de>
-		     David Kimdon <dwhedon@debian.org>
-		Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-		   Viresh Kumar <viresh.kumar@linaro.org>
-
-
-
-   Clock scaling allows you to change the clock speed of the CPUs on the
-    fly. This is a nice method to save battery power, because the lower
-            the clock speed, the less power the CPU consumes.
-
-
-Contents:
----------
-1.  CPUFreq core and interfaces
-2.  CPUFreq notifiers
-3.  CPUFreq Table Generation with Operating Performance Point (OPP)
+  1.  CPUFreq core and interfaces
+  2.  CPUFreq notifiers
+  3.  CPUFreq Table Generation with Operating Performance Point (OPP)
 
 1. General Information
-=======================
+======================
 
 The CPUFreq core code is located in drivers/cpufreq/cpufreq.c. This
 cpufreq code offers a standardized interface for the CPUFreq
@@ -60,18 +51,18 @@ transition notifiers.
 These are notified when a new policy is intended to be set. Each
 CPUFreq policy notifier is called twice for a policy transition:
 
-1.) During CPUFREQ_ADJUST all CPUFreq notifiers may change the limit if
-    they see a need for this - may it be thermal considerations or
-    hardware limitations.
+1) During CPUFREQ_ADJUST all CPUFreq notifiers may change the limit if
+   they see a need for this - may it be thermal considerations or
+   hardware limitations.
 
-2.) And during CPUFREQ_NOTIFY all notifiers are informed of the new policy
-   - if two hardware drivers failed to agree on a new policy before this
+2) And during CPUFREQ_NOTIFY all notifiers are informed of the new policy -
+   if two hardware drivers failed to agree on a new policy before this
    stage, the incompatible hardware shall be shut down, and the user
    informed of this.
 
 The phase is specified in the second argument to the notifier.
 
-The third argument, a void *pointer, points to a struct cpufreq_policy
+The third argument, a `void *` pointer, points to a struct cpufreq_policy
 consisting of several values, including min, max (the lower and upper
 frequencies (in kHz) of the new policy).
 
@@ -88,23 +79,27 @@ CPUFREQ_POSTCHANGE.
 
 The third argument is a struct cpufreq_freqs with the following
 values:
-cpu	- number of the affected CPU
-old	- old frequency
-new	- new frequency
-flags	- flags of the cpufreq driver
+
+======= ===========================
+cpu	number of the affected CPU
+old	old frequency
+new	new frequency
+flags	flags of the cpufreq driver
+======= ===========================
 
 3. CPUFreq Table Generation with Operating Performance Point (OPP)
 ==================================================================
 For details about OPP, see Documentation/power/opp.txt
 
-dev_pm_opp_init_cpufreq_table -
+dev_pm_opp_init_cpufreq_table
 	This function provides a ready to use conversion routine to translate
 	the OPP layer's internal information about the available frequencies
 	into a format readily providable to cpufreq.
 
 	WARNING: Do not use this function in interrupt context.
 
-	Example:
+	Example::
+
 	 soc_pm_init()
 	 {
 		/* Do things */
@@ -117,4 +112,5 @@ dev_pm_opp_init_cpufreq_table -
 	NOTE: This function is available only if CONFIG_CPU_FREQ is enabled in
 	addition to CONFIG_PM_OPP.
 
-dev_pm_opp_free_cpufreq_table - Free up the table allocated by dev_pm_opp_init_cpufreq_table
+dev_pm_opp_free_cpufreq_table
+	Free up the table allocated by dev_pm_opp_init_cpufreq_table
diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.rst
similarity index 57%
rename from Documentation/cpu-freq/cpu-drivers.txt
rename to Documentation/cpu-freq/cpu-drivers.rst
index 6e353d00cdc6..9cc2559bc34b 100644
--- a/Documentation/cpu-freq/cpu-drivers.txt
+++ b/Documentation/cpu-freq/cpu-drivers.rst
@@ -1,35 +1,25 @@
-     CPU frequency and voltage scaling code in the Linux(TM) kernel
-
-
-		         L i n u x    C P U F r e q
-
-			   C P U   D r i v e r s 
-
-		       - information for developers -
-
-
-		    Dominik Brodowski  <linux@brodo.de>
-		Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-		   Viresh Kumar <viresh.kumar@linaro.org>
-
-
-
-   Clock scaling allows you to change the clock speed of the CPUs on the
-    fly. This is a nice method to save battery power, because the lower
-            the clock speed, the less power the CPU consumes.
-
-
-Contents:
----------
-1.   What To Do?
-1.1  Initialization
-1.2  Per-CPU Initialization
-1.3  verify
-1.4  target/target_index or setpolicy?
-1.5  target/target_index
-1.6  setpolicy
-1.7  get_intermediate and target_intermediate
-2.   Frequency Table Helpers
+===============================================
+How to implement a new cpufreq processor driver
+===============================================
+
+.. information for developers
+
+Authors:
+  - Dominik Brodowski  <linux@brodo.de>
+  - Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+.. Contents:
+
+   1.   What To Do?
+   1.1  Initialization
+   1.2  Per-CPU Initialization
+   1.3  verify
+   1.4  target/target_index or setpolicy?
+   1.5  target/target_index
+   1.6  setpolicy
+   1.7  get_intermediate and target_intermediate
+   2.   Frequency Table Helpers
 
 
 
@@ -46,59 +36,73 @@ on what is necessary:
 
 First of all, in an __initcall level 7 (module_init()) or later
 function check whether this kernel runs on the right CPU and the right
-chipset. If so, register a struct cpufreq_driver with the CPUfreq core
-using cpufreq_register_driver()
+chipset. If so, register a `struct cpufreq_driver` with the CPUfreq core
+using `cpufreq_register_driver()`
 
-What shall this struct cpufreq_driver contain? 
+What shall this `struct cpufreq_driver` contain?
 
- .name - The name of this driver.
+.name
+  The name of this driver.
 
- .init - A pointer to the per-policy initialization function.
+.init
+  A pointer to the per-policy initialization function.
 
- .verify - A pointer to a "verification" function.
+.verify
+  A pointer to a "verification" function.
 
- .setpolicy _or_ .fast_switch _or_ .target _or_ .target_index - See
- below on the differences.
+.setpolicy **or** .fast_switch **or** .target **or** .target_index
+  See below on the differences.
 
 And optionally
 
- .flags - Hints for the cpufreq core.
+.flags
+  Hints for the cpufreq core.
 
- .driver_data - cpufreq driver specific data.
+.driver_data
+  cpufreq driver specific data.
 
- .resolve_freq - Returns the most appropriate frequency for a target
- frequency. Doesn't change the frequency though.
+.resolve_freq
+  Returns the most appropriate frequency for a target
+  frequency. Doesn't change the frequency though.
 
- .get_intermediate and target_intermediate - Used to switch to stable
- frequency while changing CPU frequency.
+.get_intermediate and target_intermediate
+  Used to switch to stable frequency while changing CPU frequency.
 
- .get - Returns current frequency of the CPU.
+.get
+  Returns current frequency of the CPU.
 
- .bios_limit - Returns HW/BIOS max frequency limitations for the CPU.
+.bios_limit
+  Returns HW/BIOS max frequency limitations for the CPU.
 
- .exit - A pointer to a per-policy cleanup function called during
- CPU_POST_DEAD phase of cpu hotplug process.
+.exit
+  A pointer to a per-policy cleanup function called during
+  CPU_POST_DEAD phase of cpu hotplug process.
 
- .stop_cpu - A pointer to a per-policy stop function called during
- CPU_DOWN_PREPARE phase of cpu hotplug process.
+.stop_cpu
+  A pointer to a per-policy stop function called during
+  CPU_DOWN_PREPARE phase of cpu hotplug process.
 
- .suspend - A pointer to a per-policy suspend function which is called
- with interrupts disabled and _after_ the governor is stopped for the
- policy.
+.suspend
+  A pointer to a per-policy suspend function which is called with
+  interrupts disabled and **after** the governor is stopped for the policy.
 
- .resume - A pointer to a per-policy resume function which is called
- with interrupts disabled and _before_ the governor is started again.
+.resume
+  A pointer to a per-policy resume function which is called
+  with interrupts disabled and **before** the governor is started again.
 
- .ready - A pointer to a per-policy ready function which is called after
- the policy is fully initialized.
+.ready
+  A pointer to a per-policy ready function which is called after
+  the policy is fully initialized.
 
- .attr - A pointer to a NULL-terminated list of "struct freq_attr" which
- allow to export values to sysfs.
+.attr
+  A pointer to a NULL-terminated list of `struct freq_attr` which
+  allow to export values to sysfs.
 
- .boost_enabled - If set, boost frequencies are enabled.
+.boost_enabled
+  If set, boost frequencies are enabled.
 
- .set_boost - A pointer to a per-policy function to enable/disable boost
- frequencies.
+.set_boost
+  A pointer to a per-policy function to enable/disable boost frequencies.
 
 
 1.2 Per-CPU Initialization
@@ -108,37 +112,42 @@ Whenever a new CPU is registered with the device model, or after the
 cpufreq driver registers itself, the per-policy initialization function
 cpufreq_driver.init is called if no cpufreq policy existed for the CPU.
 Note that the .init() and .exit() routines are called only once for the
-policy and not for each CPU managed by the policy. It takes a struct
-cpufreq_policy *policy as argument. What to do now?
+policy and not for each CPU managed by the policy. It takes a `struct
+cpufreq_policy *policy` as argument. What to do now?
 
 If necessary, activate the CPUfreq support on your CPU.
 
 Then, the driver must fill in the following values:
 
-policy->cpuinfo.min_freq _and_
-policy->cpuinfo.max_freq -	the minimum and maximum frequency 
-				(in kHz) which is supported by 
-				this CPU
-policy->cpuinfo.transition_latency   the time it takes on this CPU to
-				switch between two frequencies in
-				nanoseconds (if appropriate, else
-				specify CPUFREQ_ETERNAL)
-
-policy->cur			The current operating frequency of
-				this CPU (if appropriate)
-policy->min, 
-policy->max, 
-policy->policy and, if necessary,
-policy->governor		must contain the "default policy" for
-				this CPU. A few moments later,
-				cpufreq_driver.verify and either
-				cpufreq_driver.setpolicy or
-				cpufreq_driver.target/target_index is called
-				with these values.
-policy->cpus			Update this with the masks of the
-				(online + offline) CPUs that do DVFS
-				along with this CPU (i.e.  that share
-				clock/voltage rails with it).
++---------------------------------------+--------------------------------------+
+| policy->cpuinfo.min_freq **and**	|				       |
+| policy->cpuinfo.max_freq		| the minimum and maximum frequency    |
+| 					| (in kHz) which is supported by       |
+| 					| this CPU			       |
++---------------------------------------+--------------------------------------+
+| policy->cpuinfo.transition_latency	| the time it takes on this CPU to     |
+| 					| switch between two frequencies in    |
+| 					| nanoseconds (if appropriate, else    |
+| 					| specify CPUFREQ_ETERNAL)	       |
++---------------------------------------+--------------------------------------+
+| policy->cur				| The current operating frequency of   |
+| 					| this CPU (if appropriate)	       |
++---------------------------------------+--------------------------------------+
+| policy->min,				|				       |
+| policy->max,				|				       |
+| policy->policy and, if necessary,	|				       |
+| policy->governor			| must contain the "default policy"    |
+| 					| for this CPU. A few moments later,   |
+| 					| cpufreq_driver.verify and either     |
+| 					| cpufreq_driver.setpolicy or	       |
+| 					| cpufreq_driver.target/target_index   |
+| 					| is called with these values.	       |
++---------------------------------------+--------------------------------------+
+| policy->cpus				| Update this with the masks of the    |
+| 					| (online + offline) CPUs that do DVFS |
+| 					| along with this CPU (i.e. that share |
+| 					| clock/voltage rails with it).	       |
++---------------------------------------+--------------------------------------+
 
 For setting some of these values (cpuinfo.min[max]_freq, policy->min[max]), the
 frequency table helpers might be helpful. See the section 2 for more information
@@ -151,8 +160,8 @@ on them.
 When the user decides a new policy (consisting of
 "policy,governor,min,max") shall be set, this policy must be validated
 so that incompatible values can be corrected. For verifying these
-values cpufreq_verify_within_limits(struct cpufreq_policy *policy,
-unsigned int min_freq, unsigned int max_freq) function might be helpful.
+values `cpufreq_verify_within_limits(struct cpufreq_policy *policy,
+unsigned int min_freq, unsigned int max_freq)` function might be helpful.
 See section 2 for details on frequency table helpers.
 
 You need to make sure that at least one valid frequency (or operating
@@ -163,7 +172,7 @@ policy->max first, and only if this is no solution, decrease policy->min.
 1.4 target or target_index or setpolicy or fast_switch?
 -------------------------------------------------------
 
-Most cpufreq drivers or even most cpu frequency scaling algorithms 
+Most cpufreq drivers or even most cpu frequency scaling algorithms
 only allow the CPU frequency to be set to predefined fixed values. For
 these, you use the ->target(), ->target_index() or ->fast_switch()
 callbacks.
@@ -175,8 +184,8 @@ limits on their own. These shall use the ->setpolicy() callback.
 1.5. target/target_index
 ------------------------
 
-The target_index call has two arguments: struct cpufreq_policy *policy,
-and unsigned int index (into the exposed frequency table).
+The target_index call has two arguments: `struct cpufreq_policy *policy`,
+and `unsigned int index` (into the exposed frequency table).
 
 The CPUfreq driver must set the new frequency when called here. The
 actual frequency must be determined by freq_table[index].frequency.
@@ -184,10 +193,10 @@ actual frequency must be determined by freq_table[index].frequency.
 It should always restore to earlier frequency (i.e. policy->restore_freq) in
 case of errors, even if we switched to intermediate frequency earlier.
 
-Deprecated:
+Deprecated
 ----------
-The target call has three arguments: struct cpufreq_policy *policy,
-unsigned int target_frequency, unsigned int relation.
+The target call has three arguments: `struct cpufreq_policy *policy`,
+`unsigned int target_frequency`, `unsigned int relation`.
 
 The CPUfreq driver must set the new frequency when called here. The
 actual frequency must be determined using the following rules:
@@ -210,14 +219,14 @@ Not all drivers are expected to implement it, as sleeping from within
 this callback isn't allowed. This callback must be highly optimized to
 do switching as fast as possible.
 
-This function has two arguments: struct cpufreq_policy *policy and
-unsigned int target_frequency.
+This function has two arguments: `struct cpufreq_policy *policy` and
+`unsigned int target_frequency`.
 
 
 1.7 setpolicy
 -------------
 
-The setpolicy call only takes a struct cpufreq_policy *policy as
+The setpolicy call only takes a `struct cpufreq_policy *policy` as
 argument. You need to set the lower limit of the in-processor or
 in-chipset dynamic frequency switching to policy->min, the upper limit
 to policy->max, and -if supported- select a performance-oriented
@@ -278,10 +287,10 @@ table.
 
 cpufreq_for_each_valid_entry(pos, table) - iterates over all entries,
 excluding CPUFREQ_ENTRY_INVALID frequencies.
-Use arguments "pos" - a cpufreq_frequency_table * as a loop cursor and
-"table" - the cpufreq_frequency_table * you want to iterate over.
+Use arguments "pos" - a `cpufreq_frequency_table *` as a loop cursor and
+"table" - the `cpufreq_frequency_table *` you want to iterate over.
 
-For example:
+For example::
 
 	struct cpufreq_frequency_table *pos, *driver_freq_table;
 
diff --git a/Documentation/cpu-freq/cpufreq-nforce2.txt b/Documentation/cpu-freq/cpufreq-nforce2.rst
similarity index 65%
rename from Documentation/cpu-freq/cpufreq-nforce2.txt
rename to Documentation/cpu-freq/cpufreq-nforce2.rst
index babce1315026..d40700bd5083 100644
--- a/Documentation/cpu-freq/cpufreq-nforce2.txt
+++ b/Documentation/cpu-freq/cpufreq-nforce2.rst
@@ -1,3 +1,6 @@
+=================================
+nVidia nForce2 platform specifics
+=================================
 
 The cpufreq-nforce2 driver changes the FSB on nVidia nForce2 platforms.
 
@@ -6,14 +9,15 @@ can be controlled independently from the PCI/AGP clock.
 
 The module has two options:
 
+        ======== ======================================
 	fid: 	 multiplier * 10 (for example 8.5 = 85)
 	min_fsb: minimum FSB
+        ======== ======================================
 
 If not set, fid is calculated from the current CPU speed and the FSB.
 min_fsb defaults to FSB at boot time - 50 MHz.
 
-IMPORTANT: The available range is limited downwards!
-           Also the minimum available FSB can differ, for systems 
+IMPORTANT:
+           The available range is limited downwards!
+           Also the minimum available FSB can differ, for systems
            booting with 200 MHz, 150 should always work.
-
-
diff --git a/Documentation/cpu-freq/cpufreq-stats.rst b/Documentation/cpu-freq/cpufreq-stats.rst
new file mode 100644
index 000000000000..3e33712b496e
--- /dev/null
+++ b/Documentation/cpu-freq/cpufreq-stats.rst
@@ -0,0 +1,128 @@
+==========================================
+General description of sysfs cpufreq stats
+==========================================
+
+.. information for users
+
+
+Author: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+
+.. Contents
+   1. Introduction
+   2. Statistics Provided (with example)
+   3. Configuring cpufreq-stats
+
+
+1. Introduction
+===============
+
+cpufreq-stats is a driver that provides CPU frequency statistics for each CPU.
+These statistics are provided in /sysfs as a bunch of read_only interfaces. This
+interface (when configured) will appear in a separate directory under cpufreq
+in /sysfs (<sysfs root>/devices/system/cpu/cpuX/cpufreq/stats/) for each CPU.
+Various statistics will form read_only files under this directory.
+
+This driver is designed to be independent of any particular cpufreq_driver
+that may be running on your CPU. So, it will work with any cpufreq_driver.
+
+
+2. Statistics Provided (with example)
+=====================================
+
+cpufreq stats provides following statistics (explained in detail below).
+-  time_in_state
+-  total_trans
+-  trans_table
+
+All the statistics will be from the time the stats driver has been inserted
+(or the time the stats were reset) to the time when a read of a particular
+statistic is done. Obviously, stats driver will not have any information
+about the frequency transitions before the stats driver insertion.
+
+::
+
+    <mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # ls -l
+    total 0
+    drwxr-xr-x  2 root root    0 May 14 16:06 .
+    drwxr-xr-x  3 root root    0 May 14 15:58 ..
+    --w-------  1 root root 4096 May 14 16:06 reset
+    -r--r--r--  1 root root 4096 May 14 16:06 time_in_state
+    -r--r--r--  1 root root 4096 May 14 16:06 total_trans
+    -r--r--r--  1 root root 4096 May 14 16:06 trans_table
+
+reset
+  Write-only attribute that can be used to reset the stat counters. This can be
+  useful for evaluating system behaviour under different governors without the
+  need for a reboot.
+
+time_in_state
+  This gives the amount of time spent in each of the frequencies supported by
+  this CPU. The cat output will have "<frequency> <time>" pair in each line,
+  which will mean this CPU spent <time> usertime units of time at <frequency>.
+  Output will have one line for each of the supported frequencies. usertime
+  units here is 10mS (similar to other time exported in /proc).
+
+::
+
+  <mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat time_in_state
+  3600000 2089
+  3400000 136
+  3200000 34
+  3000000 67
+  2800000 172488
+
+
+total_trans
+  This gives the total number of frequency transitions on this CPU. The cat
+  output will have a single count which is the total number of frequency
+  transitions.
+
+::
+
+  <mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat total_trans
+  20
+
+trans_table
+  This will give a fine grained information about all the CPU frequency
+  transitions. The cat output here is a two dimensional matrix, where an entry
+  <i,j> (row i, column j) represents the count of number of transitions from
+  Freq_i to Freq_j. Freq_i rows and Freq_j columns follow the sorting order in
+  which the driver has provided the frequency table initially to the cpufreq
+  core and so can be sorted (ascending or descending) or unsorted.  The output
+  here also contains the actual freq values for each row and column for better
+  readability.
+
+  If the transition table is bigger than PAGE_SIZE, reading this will
+  return an -EFBIG error.
+
+::
+
+  <mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat trans_table
+     From  :    To
+           :   3600000   3400000   3200000   3000000   2800000
+    3600000:         0         5         0         0         0
+    3400000:         4         0         2         0         0
+    3200000:         0         1         0         2         0
+    3000000:         0         0         1         0         3
+    2800000:         0         0         0         2         0
+
+3. Configuring cpufreq-stats
+============================
+
+To configure cpufreq-stats in your kernel::
+
+   Config Main Menu
+	Power management options (ACPI, APM)  --->
+		CPU Frequency scaling  --->
+			[*] CPU Frequency scaling
+			[*]   CPU frequency translation statistics
+
+
+"CPU Frequency scaling" (CONFIG_CPU_FREQ) should be enabled to configure
+cpufreq-stats.
+
+"CPU frequency translation statistics" (CONFIG_CPU_FREQ_STAT) provides the
+statistics which includes time_in_state, total_trans and trans_table.
+
+Once this option is enabled and your CPU supports cpufrequency, you
+will be able to see the CPU frequency statistics in /sysfs.
diff --git a/Documentation/cpu-freq/cpufreq-stats.txt b/Documentation/cpu-freq/cpufreq-stats.txt
deleted file mode 100644
index 14378cecb172..000000000000
--- a/Documentation/cpu-freq/cpufreq-stats.txt
+++ /dev/null
@@ -1,127 +0,0 @@
-
-     CPU frequency and voltage scaling statistics in the Linux(TM) kernel
-
-
-             L i n u x    c p u f r e q - s t a t s   d r i v e r
-
-                       - information for users -
-
-
-             Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
-
-Contents
-1. Introduction
-2. Statistics Provided (with example)
-3. Configuring cpufreq-stats
-
-
-1. Introduction
-
-cpufreq-stats is a driver that provides CPU frequency statistics for each CPU.
-These statistics are provided in /sysfs as a bunch of read_only interfaces. This
-interface (when configured) will appear in a separate directory under cpufreq
-in /sysfs (<sysfs root>/devices/system/cpu/cpuX/cpufreq/stats/) for each CPU.
-Various statistics will form read_only files under this directory.
-
-This driver is designed to be independent of any particular cpufreq_driver
-that may be running on your CPU. So, it will work with any cpufreq_driver.
-
-
-2. Statistics Provided (with example)
-
-cpufreq stats provides following statistics (explained in detail below).
--  time_in_state
--  total_trans
--  trans_table
-
-All the statistics will be from the time the stats driver has been inserted
-(or the time the stats were reset) to the time when a read of a particular
-statistic is done. Obviously, stats driver will not have any information
-about the frequency transitions before the stats driver insertion.
-
---------------------------------------------------------------------------------
-<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # ls -l
-total 0
-drwxr-xr-x  2 root root    0 May 14 16:06 .
-drwxr-xr-x  3 root root    0 May 14 15:58 ..
---w-------  1 root root 4096 May 14 16:06 reset
--r--r--r--  1 root root 4096 May 14 16:06 time_in_state
--r--r--r--  1 root root 4096 May 14 16:06 total_trans
--r--r--r--  1 root root 4096 May 14 16:06 trans_table
---------------------------------------------------------------------------------
-
--  reset
-Write-only attribute that can be used to reset the stat counters. This can be
-useful for evaluating system behaviour under different governors without the
-need for a reboot.
-
--  time_in_state
-This gives the amount of time spent in each of the frequencies supported by
-this CPU. The cat output will have "<frequency> <time>" pair in each line, which
-will mean this CPU spent <time> usertime units of time at <frequency>. Output
-will have one line for each of the supported frequencies. usertime units here 
-is 10mS (similar to other time exported in /proc).
-
---------------------------------------------------------------------------------
-<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat time_in_state 
-3600000 2089
-3400000 136
-3200000 34
-3000000 67
-2800000 172488
---------------------------------------------------------------------------------
-
-
--  total_trans
-This gives the total number of frequency transitions on this CPU. The cat 
-output will have a single count which is the total number of frequency
-transitions.
-
---------------------------------------------------------------------------------
-<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat total_trans
-20
---------------------------------------------------------------------------------
-
--  trans_table
-This will give a fine grained information about all the CPU frequency
-transitions. The cat output here is a two dimensional matrix, where an entry
-<i,j> (row i, column j) represents the count of number of transitions from 
-Freq_i to Freq_j. Freq_i rows and Freq_j columns follow the sorting order in
-which the driver has provided the frequency table initially to the cpufreq core
-and so can be sorted (ascending or descending) or unsorted.  The output here
-also contains the actual freq values for each row and column for better
-readability.
-
-If the transition table is bigger than PAGE_SIZE, reading this will
-return an -EFBIG error.
-
---------------------------------------------------------------------------------
-<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat trans_table
-   From  :    To
-         :   3600000   3400000   3200000   3000000   2800000 
-  3600000:         0         5         0         0         0 
-  3400000:         4         0         2         0         0 
-  3200000:         0         1         0         2         0 
-  3000000:         0         0         1         0         3 
-  2800000:         0         0         0         2         0 
---------------------------------------------------------------------------------
-
-
-3. Configuring cpufreq-stats
-
-To configure cpufreq-stats in your kernel
-Config Main Menu
-	Power management options (ACPI, APM)  --->
-		CPU Frequency scaling  --->
-			[*] CPU Frequency scaling
-			[*]   CPU frequency translation statistics
-
-
-"CPU Frequency scaling" (CONFIG_CPU_FREQ) should be enabled to configure
-cpufreq-stats.
-
-"CPU frequency translation statistics" (CONFIG_CPU_FREQ_STAT) provides the
-statistics which includes time_in_state, total_trans and trans_table.
-
-Once this option is enabled and your CPU supports cpufrequency, you
-will be able to see the CPU frequency statistics in /sysfs.
diff --git a/Documentation/cpu-freq/index.rst b/Documentation/cpu-freq/index.rst
new file mode 100644
index 000000000000..10e6c05f60f6
--- /dev/null
+++ b/Documentation/cpu-freq/index.rst
@@ -0,0 +1,52 @@
+:orphan:
+
+==============================================================
+CPU frequency and voltage scaling code in the Linux(TM) kernel
+==============================================================
+
+
+Author: Dominik Brodowski  <linux@brodo.de>
+
+
+Clock scaling allows you to change the clock speed of the CPUs on the
+fly. This is a nice method to save battery power, because the lower
+the clock speed, the less power the CPU consumes.
+
+
+.. toctree::
+    :maxdepth: 1
+
+    core
+    cpufreq-stats
+    cpu-drivers
+
+    amd-powernow
+    cpufreq-nforce2
+    pcc-cpufreq
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
+
+Mailing List
+------------
+There is a CPU frequency changing CVS commit and general list where
+you can report bugs, problems or submit patches. To post a message,
+send an email to linux-pm@vger.kernel.org.
+
+Links
+-----
+the FTP archives:
+* ftp://ftp.linux.org.uk/pub/linux/cpufreq/
+
+how to access the CVS repository:
+* http://cvs.arm.linux.org.uk/
+
+the CPUFreq Mailing list:
+* http://vger.kernel.org/vger-lists.html#linux-pm
+
+Clock and voltage scaling for the SA-1100:
+* http://www.lartmaker.nl/projects/scaling
diff --git a/Documentation/cpu-freq/index.txt b/Documentation/cpu-freq/index.txt
deleted file mode 100644
index c15e75386a05..000000000000
--- a/Documentation/cpu-freq/index.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-     CPU frequency and voltage scaling code in the Linux(TM) kernel
-
-
-		         L i n u x    C P U F r e q
-
-
-
-
-		    Dominik Brodowski  <linux@brodo.de>
-
-
-
-   Clock scaling allows you to change the clock speed of the CPUs on the
-    fly. This is a nice method to save battery power, because the lower
-            the clock speed, the less power the CPU consumes.
-
-
-
-Documents in this directory:
-----------------------------
-
-amd-powernow.txt -	AMD powernow driver specific file.
-
-core.txt	-	General description of the CPUFreq core and
-			of CPUFreq notifiers.
-
-cpu-drivers.txt -	How to implement a new cpufreq processor driver.
-
-cpufreq-nforce2.txt -	nVidia nForce2 platform specific file.
-
-cpufreq-stats.txt -	General description of sysfs cpufreq stats.
-
-index.txt	-	File index, Mailing list and Links (this document)
-
-pcc-cpufreq.txt -	PCC cpufreq driver specific file.
-
-
-Mailing List
-------------
-There is a CPU frequency changing CVS commit and general list where
-you can report bugs, problems or submit patches. To post a message,
-send an email to linux-pm@vger.kernel.org.
-
-Links
------
-the FTP archives:
-* ftp://ftp.linux.org.uk/pub/linux/cpufreq/
-
-how to access the CVS repository:
-* http://cvs.arm.linux.org.uk/
-
-the CPUFreq Mailing list:
-* http://vger.kernel.org/vger-lists.html#linux-pm
-
-Clock and voltage scaling for the SA-1100:
-* http://www.lartmaker.nl/projects/scaling
diff --git a/Documentation/cpu-freq/pcc-cpufreq.txt b/Documentation/cpu-freq/pcc-cpufreq.rst
similarity index 80%
rename from Documentation/cpu-freq/pcc-cpufreq.txt
rename to Documentation/cpu-freq/pcc-cpufreq.rst
index 9e3c3b33514c..d846a36536e4 100644
--- a/Documentation/cpu-freq/pcc-cpufreq.txt
+++ b/Documentation/cpu-freq/pcc-cpufreq.rst
@@ -1,45 +1,38 @@
-/*
- *  pcc-cpufreq.txt - PCC interface documentation
- *
- *  Copyright (C) 2009 Red Hat, Matthew Garrett <mjg@redhat.com>
- *  Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
- *      Nagananda Chumbalkar <nagananda.chumbalkar@hp.com>
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or NON
- *  INFRINGEMENT. See the GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- */
-
-
-			Processor Clocking Control Driver
-			---------------------------------
-
-Contents:
----------
-1.	Introduction
-1.1	PCC interface
-1.1.1   Get Average Frequency
-1.1.2	Set Desired Frequency
-1.2	Platforms affected
-2.	Driver and /sys details
-2.1	scaling_available_frequencies
-2.2	cpuinfo_transition_latency
-2.3	cpuinfo_cur_freq
-2.4	related_cpus
-3.	Caveats
+==========================================================
+Processor Clocking Control Driver cpufreq driver specifics
+==========================================================
+
+
+.. pcc-cpufreq.txt - PCC interface documentation
+
+    Copyright (C) 2009 Red Hat, Matthew Garrett <mjg@redhat.com>
+    Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
+        Nagananda Chumbalkar <nagananda.chumbalkar@hp.com>
+
+   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; version 2 of the License.
+
+    This program is distributed in the hope that it will be useful, but
+    WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or NON
+    INFRINGEMENT. See the GNU General Public License for more details.
+
+
+.. Contents:
+   1.	Introduction
+   1.1	PCC interface
+   1.1.1  Get Average Frequency
+   1.1.2  Set Desired Frequency
+   1.2	Platforms affected
+   2.	Driver and /sys details
+   2.1	scaling_available_frequencies
+   2.2	cpuinfo_transition_latency
+   2.3	cpuinfo_cur_freq
+   2.4	related_cpus
+   3.	Caveats
 
 1. Introduction:
 ----------------
@@ -72,6 +65,7 @@ memory region. The shared memory region header contains the "command" and
 doorbell.
 
 The following commands are supported by the PCC interface:
+
 * Get Average Frequency
 * Set Desired Frequency
 
@@ -140,7 +134,9 @@ Internally, there is no need for the driver to convert the "target" frequency
 to a corresponding P-state.
 
 The VERSION number for the driver will be of the format v.xy.ab.
-eg: 1.00.02
+eg::
+
+   1.00.02
    ----- --
     |    |
     |    -- this will increase with bug fixes/enhancements to the driver
@@ -168,21 +164,21 @@ A) Often cpuinfo_cur_freq will show a value different than what is declared
 in the scaling_available_frequencies or scaling_cur_freq, or scaling_max_freq.
 This is due to "turbo boost" available on recent Intel processors. If certain
 conditions are met the BIOS can achieve a slightly higher speed than requested
-by OSPM. An example:
+by OSPM. An example::
 
-scaling_cur_freq	: 2933000
-cpuinfo_cur_freq	: 3196000
+	scaling_cur_freq	: 2933000
+	cpuinfo_cur_freq	: 3196000
 
 B) There is a round-off error associated with the cpuinfo_cur_freq value.
 Since the driver obtains the current frequency as a "percentage" (%) of the
 nominal frequency from the BIOS, sometimes, the values displayed by
-scaling_cur_freq and cpuinfo_cur_freq may not match. An example:
+scaling_cur_freq and cpuinfo_cur_freq may not match. An example::
 
-scaling_cur_freq	: 1600000
-cpuinfo_cur_freq	: 1583000
+	scaling_cur_freq	: 1600000
+	cpuinfo_cur_freq	: 1583000
 
 In this example, the nominal frequency is 2933 MHz. The driver obtains the
-current frequency, cpuinfo_cur_freq, as 54% of the nominal frequency:
+current frequency, cpuinfo_cur_freq, as 54% of the nominal frequency::
 
 	54% of 2933 MHz = 1583 MHz
 
@@ -191,10 +187,10 @@ corresponds to the frequency of the P0 P-state.
 
 2.4 related_cpus:
 -----------------
-The related_cpus field is identical to affected_cpus.
+The related_cpus field is identical to affected_cpus:
 
-affected_cpus	: 4
-related_cpus	: 4
+	affected_cpus	: 4
+	related_cpus	: 4
 
 Currently, the PCC driver does not evaluate _PSD. The platforms that support
 PCC do not implement SW_ALL. So OSPM doesn't need to perform any coordination
diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86
index 35f71825b7f3..c0c61edb8d93 100644
--- a/drivers/cpufreq/Kconfig.x86
+++ b/drivers/cpufreq/Kconfig.x86
@@ -24,7 +24,7 @@ config X86_PCC_CPUFREQ
 	  This driver adds support for the PCC interface.
 
 	  For details, take a look at:
-	  <file:Documentation/cpu-freq/pcc-cpufreq.txt>.
+	  <file:Documentation/cpu-freq/pcc-cpufreq.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called pcc-cpufreq.
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 11/79] docs: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (9 preceding siblings ...)
  2019-04-22 13:26   ` [PATCH v2 10/79] docs: cpu-freq: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 12/79] docs: fault-injection: " Mauro Carvalho Chehab
                     ` (66 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Alasdair Kergon, Mike Snitzer, dm-devel,
	Shaohua Li, linux-raid

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 ...{cache-policies.txt => cache-policies.rst} |  24 +-
 .../device-mapper/{cache.txt => cache.rst}    | 206 +++++++++-------
 .../device-mapper/{delay.txt => delay.rst}    |  29 ++-
 .../{dm-crypt.txt => dm-crypt.rst}            |  57 +++--
 .../{dm-flakey.txt => dm-flakey.rst}          |  45 ++--
 .../{dm-init.txt => dm-init.rst}              |  75 +++---
 .../{dm-integrity.txt => dm-integrity.rst}    |  55 +++--
 .../device-mapper/{dm-io.txt => dm-io.rst}    |  14 +-
 .../device-mapper/{dm-log.txt => dm-log.rst}  |   5 +-
 ...m-queue-length.txt => dm-queue-length.rst} |  25 +-
 .../{dm-raid.txt => dm-raid.rst}              | 225 +++++++++++-------
 ...m-service-time.txt => dm-service-time.rst} |  68 +++---
 Documentation/device-mapper/dm-uevent.rst     | 110 +++++++++
 Documentation/device-mapper/dm-uevent.txt     |  97 --------
 .../{dm-zoned.txt => dm-zoned.rst}            |  10 +-
 .../device-mapper/{era.txt => era.rst}        |  36 +--
 Documentation/device-mapper/index.rst         |  44 ++++
 .../device-mapper/{kcopyd.txt => kcopyd.rst}  |  10 +-
 Documentation/device-mapper/linear.rst        |  63 +++++
 Documentation/device-mapper/linear.txt        |  61 -----
 .../{log-writes.txt => log-writes.rst}        |  91 +++----
 ...ersistent-data.txt => persistent-data.rst} |   4 +
 .../{snapshot.txt => snapshot.rst}            | 116 ++++-----
 .../{statistics.txt => statistics.rst}        |  62 ++---
 Documentation/device-mapper/striped.rst       |  61 +++++
 Documentation/device-mapper/striped.txt       |  57 -----
 .../device-mapper/{switch.txt => switch.rst}  |  47 ++--
 ...provisioning.txt => thin-provisioning.rst} |  68 ++++--
 .../{unstriped.txt => unstriped.rst}          | 111 +++++----
 .../device-mapper/{verity.txt => verity.rst}  |  20 +-
 .../{writecache.txt => writecache.rst}        |  13 +-
 .../device-mapper/{zero.txt => zero.rst}      |  14 +-
 .../filesystems/ubifs-authentication.md       |   4 +-
 drivers/md/Kconfig                            |   2 +-
 drivers/md/dm-init.c                          |   2 +-
 drivers/md/dm-raid.c                          |   2 +-
 36 files changed, 1130 insertions(+), 803 deletions(-)
 rename Documentation/device-mapper/{cache-policies.txt => cache-policies.rst} (94%)
 rename Documentation/device-mapper/{cache.txt => cache.rst} (61%)
 rename Documentation/device-mapper/{delay.txt => delay.rst} (53%)
 rename Documentation/device-mapper/{dm-crypt.txt => dm-crypt.rst} (87%)
 rename Documentation/device-mapper/{dm-flakey.txt => dm-flakey.rst} (60%)
 rename Documentation/device-mapper/{dm-init.txt => dm-init.rst} (68%)
 rename Documentation/device-mapper/{dm-integrity.txt => dm-integrity.rst} (90%)
 rename Documentation/device-mapper/{dm-io.txt => dm-io.rst} (92%)
 rename Documentation/device-mapper/{dm-log.txt => dm-log.rst} (90%)
 rename Documentation/device-mapper/{dm-queue-length.txt => dm-queue-length.rst} (76%)
 rename Documentation/device-mapper/{dm-raid.txt => dm-raid.rst} (71%)
 rename Documentation/device-mapper/{dm-service-time.txt => dm-service-time.rst} (60%)
 create mode 100644 Documentation/device-mapper/dm-uevent.rst
 delete mode 100644 Documentation/device-mapper/dm-uevent.txt
 rename Documentation/device-mapper/{dm-zoned.txt => dm-zoned.rst} (97%)
 rename Documentation/device-mapper/{era.txt => era.rst} (70%)
 create mode 100644 Documentation/device-mapper/index.rst
 rename Documentation/device-mapper/{kcopyd.txt => kcopyd.rst} (93%)
 create mode 100644 Documentation/device-mapper/linear.rst
 delete mode 100644 Documentation/device-mapper/linear.txt
 rename Documentation/device-mapper/{log-writes.txt => log-writes.rst} (61%)
 rename Documentation/device-mapper/{persistent-data.txt => persistent-data.rst} (98%)
 rename Documentation/device-mapper/{snapshot.txt => snapshot.rst} (62%)
 rename Documentation/device-mapper/{statistics.txt => statistics.rst} (87%)
 create mode 100644 Documentation/device-mapper/striped.rst
 delete mode 100644 Documentation/device-mapper/striped.txt
 rename Documentation/device-mapper/{switch.txt => switch.rst} (84%)
 rename Documentation/device-mapper/{thin-provisioning.txt => thin-provisioning.rst} (92%)
 rename Documentation/device-mapper/{unstriped.txt => unstriped.rst} (60%)
 rename Documentation/device-mapper/{verity.txt => verity.rst} (98%)
 rename Documentation/device-mapper/{writecache.txt => writecache.rst} (96%)
 rename Documentation/device-mapper/{zero.txt => zero.rst} (83%)

diff --git a/Documentation/device-mapper/cache-policies.txt b/Documentation/device-mapper/cache-policies.rst
similarity index 94%
rename from Documentation/device-mapper/cache-policies.txt
rename to Documentation/device-mapper/cache-policies.rst
index 86786d87d9a8..b17fe352fc41 100644
--- a/Documentation/device-mapper/cache-policies.txt
+++ b/Documentation/device-mapper/cache-policies.rst
@@ -1,3 +1,4 @@
+=============================
 Guidance for writing policies
 =============================
 
@@ -30,7 +31,7 @@ multiqueue (mq)
 
 This policy is now an alias for smq (see below).
 
-The following tunables are accepted, but have no effect:
+The following tunables are accepted, but have no effect::
 
 	'sequential_threshold <#nr_sequential_ios>'
 	'random_threshold <#nr_random_ios>'
@@ -56,7 +57,9 @@ mq policy's hints to be dropped.  Also, performance of the cache may
 degrade slightly until smq recalculates the origin device's hotspots
 that should be cached.
 
-Memory usage:
+Memory usage
+^^^^^^^^^^^^
+
 The mq policy used a lot of memory; 88 bytes per cache block on a 64
 bit machine.
 
@@ -69,7 +72,9 @@ cache block).
 All this means smq uses ~25bytes per cache block.  Still a lot of
 memory, but a substantial improvement nontheless.
 
-Level balancing:
+Level balancing
+^^^^^^^^^^^^^^^
+
 mq placed entries in different levels of the multiqueue structures
 based on their hit count (~ln(hit count)).  This meant the bottom
 levels generally had the most entries, and the top ones had very
@@ -94,7 +99,9 @@ is used to decide which blocks to promote.  If the hotspot queue is
 performing badly then it starts moving entries more quickly between
 levels.  This lets it adapt to new IO patterns very quickly.
 
-Performance:
+Performance
+^^^^^^^^^^^
+
 Testing smq shows substantially better performance than mq.
 
 cleaner
@@ -105,16 +112,19 @@ The cleaner writes back all dirty blocks in a cache to decommission it.
 Examples
 ========
 
-The syntax for a table is:
+The syntax for a table is::
+
 	cache <metadata dev> <cache dev> <origin dev> <block size>
 	<#feature_args> [<feature arg>]*
 	<policy> <#policy_args> [<policy arg>]*
 
-The syntax to send a message using the dmsetup command is:
+The syntax to send a message using the dmsetup command is::
+
 	dmsetup message <mapped device> 0 sequential_threshold 1024
 	dmsetup message <mapped device> 0 random_threshold 8
 
-Using dmsetup:
+Using dmsetup::
+
 	dmsetup create blah --table "0 268435456 cache /dev/sdb /dev/sdc \
 	    /dev/sdd 512 0 mq 4 sequential_threshold 1024 random_threshold 8"
 	creates a 128GB large mapped device named 'blah' with the
diff --git a/Documentation/device-mapper/cache.txt b/Documentation/device-mapper/cache.rst
similarity index 61%
rename from Documentation/device-mapper/cache.txt
rename to Documentation/device-mapper/cache.rst
index 8ae1cf8e94da..f15e5254d05b 100644
--- a/Documentation/device-mapper/cache.txt
+++ b/Documentation/device-mapper/cache.rst
@@ -1,3 +1,7 @@
+=====
+Cache
+=====
+
 Introduction
 ============
 
@@ -24,10 +28,13 @@ scenarios (eg. a vm image server).
 Glossary
 ========
 
-  Migration -  Movement of the primary copy of a logical block from one
+  Migration
+	       Movement of the primary copy of a logical block from one
 	       device to the other.
-  Promotion -  Migration from slow device to fast device.
-  Demotion  -  Migration from fast device to slow device.
+  Promotion
+	       Migration from slow device to fast device.
+  Demotion
+	       Migration from fast device to slow device.
 
 The origin device always contains a copy of the logical block, which
 may be out of date or kept in sync with the copy on the cache device
@@ -169,45 +176,53 @@ Target interface
 Constructor
 -----------
 
- cache <metadata dev> <cache dev> <origin dev> <block size>
-       <#feature args> [<feature arg>]*
-       <policy> <#policy args> [policy args]*
+  ::
 
- metadata dev    : fast device holding the persistent metadata
- cache dev	 : fast device holding cached data blocks
- origin dev	 : slow device holding original data blocks
- block size      : cache unit size in sectors
+   cache <metadata dev> <cache dev> <origin dev> <block size>
+         <#feature args> [<feature arg>]*
+         <policy> <#policy args> [policy args]*
 
- #feature args   : number of feature arguments passed
- feature args    : writethrough or passthrough (The default is writeback.)
+ ================ =======================================================
+ metadata dev     fast device holding the persistent metadata
+ cache dev	  fast device holding cached data blocks
+ origin dev	  slow device holding original data blocks
+ block size       cache unit size in sectors
 
- policy          : the replacement policy to use
- #policy args    : an even number of arguments corresponding to
-                   key/value pairs passed to the policy
- policy args     : key/value pairs passed to the policy
-		   E.g. 'sequential_threshold 1024'
-		   See cache-policies.txt for details.
+ #feature args    number of feature arguments passed
+ feature args     writethrough or passthrough (The default is writeback.)
+
+ policy           the replacement policy to use
+ #policy args     an even number of arguments corresponding to
+                  key/value pairs passed to the policy
+ policy args      key/value pairs passed to the policy
+		  E.g. 'sequential_threshold 1024'
+		  See cache-policies.txt for details.
+ ================ =======================================================
 
 Optional feature arguments are:
-   writethrough  : write through caching that prohibits cache block
-		   content from being different from origin block content.
-		   Without this argument, the default behaviour is to write
-		   back cache block contents later for performance reasons,
-		   so they may differ from the corresponding origin blocks.
 
-   passthrough	 : a degraded mode useful for various cache coherency
-		   situations (e.g., rolling back snapshots of
-		   underlying storage).	 Reads and writes always go to
-		   the origin.	If a write goes to a cached origin
-		   block, then the cache block is invalidated.
-		   To enable passthrough mode the cache must be clean.
 
-   metadata2	: use version 2 of the metadata.  This stores the dirty bits
-                  in a separate btree, which improves speed of shutting
-		  down the cache.
+   ==================== ========================================================
+   writethrough		write through caching that prohibits cache block
+			content from being different from origin block content.
+			Without this argument, the default behaviour is to write
+			back cache block contents later for performance reasons,
+			so they may differ from the corresponding origin blocks.
 
-   no_discard_passdown	: disable passing down discards from the cache
-			  to the origin's data device.
+   passthrough		a degraded mode useful for various cache coherency
+			situations (e.g., rolling back snapshots of
+			underlying storage).	 Reads and writes always go to
+			the origin.	If a write goes to a cached origin
+			block, then the cache block is invalidated.
+			To enable passthrough mode the cache must be clean.
+
+   metadata2		use version 2 of the metadata.  This stores the dirty
+			bits in a separate btree, which improves speed of
+			shutting down the cache.
+
+   no_discard_passdown	disable passing down discards from the cache
+			to the origin's data device.
+   ==================== ========================================================
 
 A policy called 'default' is always registered.  This is an alias for
 the policy we currently think is giving best all round performance.
@@ -218,54 +233,61 @@ the characteristics of a specific policy, always request it by name.
 Status
 ------
 
-<metadata block size> <#used metadata blocks>/<#total metadata blocks>
-<cache block size> <#used cache blocks>/<#total cache blocks>
-<#read hits> <#read misses> <#write hits> <#write misses>
-<#demotions> <#promotions> <#dirty> <#features> <features>*
-<#core args> <core args>* <policy name> <#policy args> <policy args>*
-<cache metadata mode>
+::
 
-metadata block size	 : Fixed block size for each metadata block in
-			     sectors
-#used metadata blocks	 : Number of metadata blocks used
-#total metadata blocks	 : Total number of metadata blocks
-cache block size	 : Configurable block size for the cache device
-			     in sectors
-#used cache blocks	 : Number of blocks resident in the cache
-#total cache blocks	 : Total number of cache blocks
-#read hits		 : Number of times a READ bio has been mapped
-			     to the cache
-#read misses		 : Number of times a READ bio has been mapped
-			     to the origin
-#write hits		 : Number of times a WRITE bio has been mapped
-			     to the cache
-#write misses		 : Number of times a WRITE bio has been
-			     mapped to the origin
-#demotions		 : Number of times a block has been removed
-			     from the cache
-#promotions		 : Number of times a block has been moved to
-			     the cache
-#dirty			 : Number of blocks in the cache that differ
-			     from the origin
-#feature args		 : Number of feature args to follow
-feature args		 : 'writethrough' (optional)
-#core args		 : Number of core arguments (must be even)
-core args		 : Key/value pairs for tuning the core
-			     e.g. migration_threshold
-policy name		 : Name of the policy
-#policy args		 : Number of policy arguments to follow (must be even)
-policy args		 : Key/value pairs e.g. sequential_threshold
-cache metadata mode      : ro if read-only, rw if read-write
-	In serious cases where even a read-only mode is deemed unsafe
-	no further I/O will be permitted and the status will just
-	contain the string 'Fail'.  The userspace recovery tools
-	should then be used.
-needs_check		 : 'needs_check' if set, '-' if not set
-	A metadata operation has failed, resulting in the needs_check
-	flag being set in the metadata's superblock.  The metadata
-	device must be deactivated and checked/repaired before the
-	cache can be made fully operational again.  '-' indicates
-	needs_check is not set.
+  <metadata block size> <#used metadata blocks>/<#total metadata blocks>
+  <cache block size> <#used cache blocks>/<#total cache blocks>
+  <#read hits> <#read misses> <#write hits> <#write misses>
+  <#demotions> <#promotions> <#dirty> <#features> <features>*
+  <#core args> <core args>* <policy name> <#policy args> <policy args>*
+  <cache metadata mode>
+
+
+========================= =====================================================
+metadata block size	  Fixed block size for each metadata block in
+			  sectors
+#used metadata blocks	  Number of metadata blocks used
+#total metadata blocks	  Total number of metadata blocks
+cache block size	  Configurable block size for the cache device
+			  in sectors
+#used cache blocks	  Number of blocks resident in the cache
+#total cache blocks	  Total number of cache blocks
+#read hits		  Number of times a READ bio has been mapped
+			  to the cache
+#read misses		  Number of times a READ bio has been mapped
+			  to the origin
+#write hits		  Number of times a WRITE bio has been mapped
+			  to the cache
+#write misses		  Number of times a WRITE bio has been
+			  mapped to the origin
+#demotions		  Number of times a block has been removed
+			  from the cache
+#promotions		  Number of times a block has been moved to
+			  the cache
+#dirty			  Number of blocks in the cache that differ
+			  from the origin
+#feature args		  Number of feature args to follow
+feature args		  'writethrough' (optional)
+#core args		  Number of core arguments (must be even)
+core args		  Key/value pairs for tuning the core
+			  e.g. migration_threshold
+policy name		  Name of the policy
+#policy args		  Number of policy arguments to follow (must be even)
+policy args		  Key/value pairs e.g. sequential_threshold
+cache metadata mode       ro if read-only, rw if read-write
+
+			  In serious cases where even a read-only mode is
+			  deemed unsafe no further I/O will be permitted and
+			  the status will just contain the string 'Fail'.
+			  The userspace recovery tools should then be used.
+needs_check		  'needs_check' if set, '-' if not set
+			  A metadata operation has failed, resulting in the
+			  needs_check flag being set in the metadata's
+			  superblock.  The metadata device must be
+			  deactivated and checked/repaired before the
+			  cache can be made fully operational again.
+			  '-' indicates	needs_check is not set.
+========================= =====================================================
 
 Messages
 --------
@@ -274,11 +296,12 @@ Policies will have different tunables, specific to each one, so we
 need a generic way of getting and setting these.  Device-mapper
 messages are used.  (A sysfs interface would also be possible.)
 
-The message format is:
+The message format is::
 
    <key> <value>
 
-E.g.
+E.g.::
+
    dmsetup message my_cache 0 sequential_threshold 1024
 
 
@@ -290,11 +313,12 @@ of values from 5 to 9.  Each cblock must be expressed as a decimal
 value, in the future a variant message that takes cblock ranges
 expressed in hexadecimal may be needed to better support efficient
 invalidation of larger caches.  The cache must be in passthrough mode
-when invalidate_cblocks is used.
+when invalidate_cblocks is used::
 
    invalidate_cblocks [<cblock>|<cblock begin>-<cblock end>]*
 
-E.g.
+E.g.::
+
    dmsetup message my_cache 0 invalidate_cblocks 2345 3456-4567 5678-6789
 
 Examples
@@ -304,8 +328,10 @@ The test suite can be found here:
 
 https://github.com/jthornber/device-mapper-test-suite
 
-dmsetup create my_cache --table '0 41943040 cache /dev/mapper/metadata \
-	/dev/mapper/ssd /dev/mapper/origin 512 1 writeback default 0'
-dmsetup create my_cache --table '0 41943040 cache /dev/mapper/metadata \
-	/dev/mapper/ssd /dev/mapper/origin 1024 1 writeback \
-	mq 4 sequential_threshold 1024 random_threshold 8'
+::
+
+  dmsetup create my_cache --table '0 41943040 cache /dev/mapper/metadata \
+	  /dev/mapper/ssd /dev/mapper/origin 512 1 writeback default 0'
+  dmsetup create my_cache --table '0 41943040 cache /dev/mapper/metadata \
+	  /dev/mapper/ssd /dev/mapper/origin 1024 1 writeback \
+	  mq 4 sequential_threshold 1024 random_threshold 8'
diff --git a/Documentation/device-mapper/delay.txt b/Documentation/device-mapper/delay.rst
similarity index 53%
rename from Documentation/device-mapper/delay.txt
rename to Documentation/device-mapper/delay.rst
index 6426c45273cb..917ba8c33359 100644
--- a/Documentation/device-mapper/delay.txt
+++ b/Documentation/device-mapper/delay.rst
@@ -1,10 +1,12 @@
+========
 dm-delay
 ========
 
 Device-Mapper's "delay" target delays reads and/or writes
 and maps them to different devices.
 
-Parameters:
+Parameters::
+
     <device> <offset> <delay> [<write_device> <write_offset> <write_delay>
 			       [<flush_device> <flush_offset> <flush_delay>]]
 
@@ -14,15 +16,16 @@ Delays are specified in milliseconds.
 
 Example scripts
 ===============
-[[
-#!/bin/sh
-# Create device delaying rw operation for 500ms
-echo "0 `blockdev --getsz $1` delay $1 0 500" | dmsetup create delayed
-]]
-
-[[
-#!/bin/sh
-# Create device delaying only write operation for 500ms and
-# splitting reads and writes to different devices $1 $2
-echo "0 `blockdev --getsz $1` delay $1 0 0 $2 0 500" | dmsetup create delayed
-]]
+
+::
+
+	#!/bin/sh
+	# Create device delaying rw operation for 500ms
+	echo "0 `blockdev --getsz $1` delay $1 0 500" | dmsetup create delayed
+
+::
+
+	#!/bin/sh
+	# Create device delaying only write operation for 500ms and
+	# splitting reads and writes to different devices $1 $2
+	echo "0 `blockdev --getsz $1` delay $1 0 0 $2 0 500" | dmsetup create delayed
diff --git a/Documentation/device-mapper/dm-crypt.txt b/Documentation/device-mapper/dm-crypt.rst
similarity index 87%
rename from Documentation/device-mapper/dm-crypt.txt
rename to Documentation/device-mapper/dm-crypt.rst
index 3b3e1de21c9c..8f4a3f889d43 100644
--- a/Documentation/device-mapper/dm-crypt.txt
+++ b/Documentation/device-mapper/dm-crypt.rst
@@ -1,5 +1,6 @@
+========
 dm-crypt
-=========
+========
 
 Device-Mapper's "crypt" target provides transparent encryption of block devices
 using the kernel crypto API.
@@ -7,15 +8,20 @@ using the kernel crypto API.
 For a more detailed description of supported parameters see:
 https://gitlab.com/cryptsetup/cryptsetup/wikis/DMCrypt
 
-Parameters: <cipher> <key> <iv_offset> <device path> \
+Parameters::
+
+	      <cipher> <key> <iv_offset> <device path> \
 	      <offset> [<#opt_params> <opt_params>]
 
 <cipher>
     Encryption cipher, encryption mode and Initial Vector (IV) generator.
 
-    The cipher specifications format is:
+    The cipher specifications format is::
+
        cipher[:keycount]-chainmode-ivmode[:ivopts]
-    Examples:
+
+    Examples::
+
        aes-cbc-essiv:sha256
        aes-xts-plain64
        serpent-xts-plain64
@@ -25,12 +31,17 @@ Parameters: <cipher> <key> <iv_offset> <device path> \
     as for the first format type.
     This format is mainly used for specification of authenticated modes.
 
-    The crypto API cipher specifications format is:
+    The crypto API cipher specifications format is::
+
         capi:cipher_api_spec-ivmode[:ivopts]
-    Examples:
+
+    Examples::
+
         capi:cbc(aes)-essiv:sha256
         capi:xts(aes)-plain64
-    Examples of authenticated modes:
+
+    Examples of authenticated modes::
+
         capi:gcm(aes)-random
         capi:authenc(hmac(sha256),xts(aes))-random
         capi:rfc7539(chacha20,poly1305)-random
@@ -142,21 +153,21 @@ LUKS (Linux Unified Key Setup) is now the preferred way to set up disk
 encryption with dm-crypt using the 'cryptsetup' utility, see
 https://gitlab.com/cryptsetup/cryptsetup
 
-[[
-#!/bin/sh
-# Create a crypt device using dmsetup
-dmsetup create crypt1 --table "0 `blockdev --getsz $1` crypt aes-cbc-essiv:sha256 babebabebabebabebabebabebabebabe 0 $1 0"
-]]
+::
 
-[[
-#!/bin/sh
-# Create a crypt device using dmsetup when encryption key is stored in keyring service
-dmsetup create crypt2 --table "0 `blockdev --getsize $1` crypt aes-cbc-essiv:sha256 :32:logon:my_prefix:my_key 0 $1 0"
-]]
+	#!/bin/sh
+	# Create a crypt device using dmsetup
+	dmsetup create crypt1 --table "0 `blockdev --getsz $1` crypt aes-cbc-essiv:sha256 babebabebabebabebabebabebabebabe 0 $1 0"
 
-[[
-#!/bin/sh
-# Create a crypt device using cryptsetup and LUKS header with default cipher
-cryptsetup luksFormat $1
-cryptsetup luksOpen $1 crypt1
-]]
+::
+
+	#!/bin/sh
+	# Create a crypt device using dmsetup when encryption key is stored in keyring service
+	dmsetup create crypt2 --table "0 `blockdev --getsize $1` crypt aes-cbc-essiv:sha256 :32:logon:my_prefix:my_key 0 $1 0"
+
+::
+
+	#!/bin/sh
+	# Create a crypt device using cryptsetup and LUKS header with default cipher
+	cryptsetup luksFormat $1
+	cryptsetup luksOpen $1 crypt1
diff --git a/Documentation/device-mapper/dm-flakey.txt b/Documentation/device-mapper/dm-flakey.rst
similarity index 60%
rename from Documentation/device-mapper/dm-flakey.txt
rename to Documentation/device-mapper/dm-flakey.rst
index 9f0e247d0877..86138735879d 100644
--- a/Documentation/device-mapper/dm-flakey.txt
+++ b/Documentation/device-mapper/dm-flakey.rst
@@ -1,3 +1,4 @@
+=========
 dm-flakey
 =========
 
@@ -15,17 +16,26 @@ underlying devices.
 
 Table parameters
 ----------------
+
+::
+
   <dev path> <offset> <up interval> <down interval> \
     [<num_features> [<feature arguments>]]
 
 Mandatory parameters:
-    <dev path>: Full pathname to the underlying block-device, or a
-                "major:minor" device-number.
-    <offset>: Starting sector within the device.
-    <up interval>: Number of seconds device is available.
-    <down interval>: Number of seconds device returns errors.
+
+    <dev path>:
+        Full pathname to the underlying block-device, or a
+        "major:minor" device-number.
+    <offset>:
+        Starting sector within the device.
+    <up interval>:
+        Number of seconds device is available.
+    <down interval>:
+        Number of seconds device returns errors.
 
 Optional feature parameters:
+
   If no feature parameters are present, during the periods of
   unreliability, all I/O returns errors.
 
@@ -41,17 +51,24 @@ Optional feature parameters:
 	During <down interval>, replace <Nth_byte> of the data of
 	each matching bio with <value>.
 
-    <Nth_byte>: The offset of the byte to replace.
-		Counting starts at 1, to replace the first byte.
-    <direction>: Either 'r' to corrupt reads or 'w' to corrupt writes.
-		 'w' is incompatible with drop_writes.
-    <value>: The value (from 0-255) to write.
-    <flags>: Perform the replacement only if bio->bi_opf has all the
-	     selected flags set.
+    <Nth_byte>:
+	The offset of the byte to replace.
+	Counting starts at 1, to replace the first byte.
+    <direction>:
+	Either 'r' to corrupt reads or 'w' to corrupt writes.
+	'w' is incompatible with drop_writes.
+    <value>:
+	The value (from 0-255) to write.
+    <flags>:
+	Perform the replacement only if bio->bi_opf has all the
+	selected flags set.
 
 Examples:
+
+Replaces the 32nd byte of READ bios with the value 1::
+
   corrupt_bio_byte 32 r 1 0
-	- replaces the 32nd byte of READ bios with the value 1
+
+Replaces the 224th byte of REQ_META (=32) bios with the value 0::
 
   corrupt_bio_byte 224 w 0 32
-	- replaces the 224th byte of REQ_META (=32) bios with the value 0
diff --git a/Documentation/device-mapper/dm-init.txt b/Documentation/device-mapper/dm-init.rst
similarity index 68%
rename from Documentation/device-mapper/dm-init.txt
rename to Documentation/device-mapper/dm-init.rst
index 8464ee7c01b8..a0db2f30030e 100644
--- a/Documentation/device-mapper/dm-init.txt
+++ b/Documentation/device-mapper/dm-init.rst
@@ -1,5 +1,6 @@
+================================
 Early creation of mapped devices
-====================================
+================================
 
 It is possible to configure a device-mapper device to act as the root device for
 your system in two ways.
@@ -12,15 +13,17 @@ The second is to create one or more device-mappers using the module parameter
 
 The format is specified as a string of data separated by commas and optionally
 semi-colons, where:
+
  - a comma is used to separate fields like name, uuid, flags and table
    (specifies one device)
  - a semi-colon is used to separate devices.
 
-So the format will look like this:
+So the format will look like this::
 
  dm-mod.create=<name>,<uuid>,<minor>,<flags>,<table>[,<table>+][;<name>,<uuid>,<minor>,<flags>,<table>[,<table>+]+]
 
-Where,
+Where::
+
 	<name>		::= The device name.
 	<uuid>		::= xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx | ""
 	<minor>		::= The device minor number | ""
@@ -29,7 +32,7 @@ Where,
 	<target_type>	::= "verity" | "linear" | ... (see list below)
 
 The dm line should be equivalent to the one used by the dmsetup tool with the
---concise argument.
+`--concise` argument.
 
 Target types
 ============
@@ -38,32 +41,34 @@ Not all target types are available as there are serious risks in allowing
 activation of certain DM targets without first using userspace tools to check
 the validity of associated metadata.
 
-	"cache":		constrained, userspace should verify cache device
-	"crypt":		allowed
-	"delay":		allowed
-	"era":			constrained, userspace should verify metadata device
-	"flakey":		constrained, meant for test
-	"linear":		allowed
-	"log-writes":		constrained, userspace should verify metadata device
-	"mirror":		constrained, userspace should verify main/mirror device
-	"raid":			constrained, userspace should verify metadata device
-	"snapshot":		constrained, userspace should verify src/dst device
-	"snapshot-origin":	allowed
-	"snapshot-merge":	constrained, userspace should verify src/dst device
-	"striped":		allowed
-	"switch":		constrained, userspace should verify dev path
-	"thin":			constrained, requires dm target message from userspace
-	"thin-pool":		constrained, requires dm target message from userspace
-	"verity":		allowed
-	"writecache":		constrained, userspace should verify cache device
-	"zero":			constrained, not meant for rootfs
+======================= =======================================================
+`cache`			constrained, userspace should verify cache device
+`crypt`			allowed
+`delay`			allowed
+`era`			constrained, userspace should verify metadata device
+`flakey`		constrained, meant for test
+`linear`		allowed
+`log-writes`		constrained, userspace should verify metadata device
+`mirror`		constrained, userspace should verify main/mirror device
+`raid`			constrained, userspace should verify metadata device
+`snapshot`		constrained, userspace should verify src/dst device
+`snapshot-origin`	allowed
+`snapshot-merge`	constrained, userspace should verify src/dst device
+`striped`		allowed
+`switch`		constrained, userspace should verify dev path
+`thin`			constrained, requires dm target message from userspace
+`thin-pool`		constrained, requires dm target message from userspace
+`verity`		allowed
+`writecache`		constrained, userspace should verify cache device
+`zero`			constrained, not meant for rootfs
+======================= =======================================================
 
 If the target is not listed above, it is constrained by default (not tested).
 
 Examples
 ========
 An example of booting to a linear array made up of user-mode linux block
-devices:
+devices::
 
   dm-mod.create="lroot,,,rw, 0 4096 linear 98:16 0, 4096 4096 linear 98:32 0" root=/dev/dm-0
 
@@ -71,8 +76,8 @@ This will boot to a rw dm-linear target of 8192 sectors split across two block
 devices identified by their major:minor numbers.  After boot, udev will rename
 this target to /dev/mapper/lroot (depending on the rules). No uuid was assigned.
 
-An example of multiple device-mappers, with the dm-mod.create="..." contents is shown here
-split on multiple lines for readability:
+An example of multiple device-mappers, with the dm-mod.create="..." contents
+is shown here split on multiple lines for readability::
 
   vroot,,,ro,
     0 1740800 verity 254:0 254:0 1740800 sha1
@@ -84,30 +89,36 @@ split on multiple lines for readability:
 
 Other examples (per target):
 
-"crypt":
+"crypt"::
+
   dm-crypt,,8,ro,
     0 1048576 crypt aes-xts-plain64
     babebabebabebabebabebabebabebabebabebabebabebabebabebabebabebabe 0
     /dev/sda 0 1 allow_discards
 
-"delay":
+"delay"::
+
   dm-delay,,4,ro,0 409600 delay /dev/sda1 0 500
 
-"linear":
+"linear"::
+
   dm-linear,,,rw,
     0 32768 linear /dev/sda1 0,
     32768 1024000 linear /dev/sda2 0,
     1056768 204800 linear /dev/sda3 0,
     1261568 512000 linear /dev/sda4 0
 
-"snapshot-origin":
+"snapshot-origin"::
+
   dm-snap-orig,,4,ro,0 409600 snapshot-origin 8:2
 
-"striped":
+"striped"::
+
   dm-striped,,4,ro,0 1638400 striped 4 4096
   /dev/sda1 0 /dev/sda2 0 /dev/sda3 0 /dev/sda4 0
 
-"verity":
+"verity"::
+
   dm-verity,,4,ro,
     0 1638400 verity 1 8:1 8:2 4096 4096 204800 1 sha256
     fb1a5a0f00deb908d8b53cb270858975e76cf64105d412ce764225d53b8f3cfd
diff --git a/Documentation/device-mapper/dm-integrity.txt b/Documentation/device-mapper/dm-integrity.rst
similarity index 90%
rename from Documentation/device-mapper/dm-integrity.txt
rename to Documentation/device-mapper/dm-integrity.rst
index 297251b0d2d5..4fa8d2939d46 100644
--- a/Documentation/device-mapper/dm-integrity.txt
+++ b/Documentation/device-mapper/dm-integrity.rst
@@ -1,3 +1,7 @@
+============
+dm-integrity
+============
+
 The dm-integrity target emulates a block device that has additional
 per-sector tags that can be used for storing integrity information.
 
@@ -28,15 +32,16 @@ zeroes. If the superblock is neither valid nor zeroed, the dm-integrity
 target can't be loaded.
 
 To use the target for the first time:
+
 1. overwrite the superblock with zeroes
 2. load the dm-integrity target with one-sector size, the kernel driver
-	will format the device
+   will format the device
 3. unload the dm-integrity target
 4. read the "provided_data_sectors" value from the superblock
 5. load the dm-integrity target with the the target size
-	"provided_data_sectors"
+   "provided_data_sectors"
 6. if you want to use dm-integrity with dm-crypt, load the dm-crypt target
-	with the size "provided_data_sectors"
+   with the size "provided_data_sectors"
 
 
 Target arguments:
@@ -44,22 +49,26 @@ Target arguments:
 1. the underlying block device
 
 2. the number of reserved sector at the beginning of the device - the
-	dm-integrity won't read of write these sectors
+   dm-integrity won't read of write these sectors
 
 3. the size of the integrity tag (if "-" is used, the size is taken from
-	the internal-hash algorithm)
+   the internal-hash algorithm)
 
 4. mode:
-	D - direct writes (without journal) - in this mode, journaling is
+
+	D - direct writes (without journal)
+		in this mode, journaling is
 		not used and data sectors and integrity tags are written
 		separately. In case of crash, it is possible that the data
 		and integrity tag doesn't match.
-	J - journaled writes - data and integrity tags are written to the
+	J - journaled writes
+		data and integrity tags are written to the
 		journal and atomicity is guaranteed. In case of crash,
 		either both data and tag or none of them are written. The
 		journaled mode degrades write throughput twice because the
 		data have to be written twice.
-	R - recovery mode - in this mode, journal is not replayed,
+	R - recovery mode
+		in this mode, journal is not replayed,
 		checksums are not checked and writes to the device are not
 		allowed. This mode is useful for data recovery if the
 		device cannot be activated in any of the other standard
@@ -154,9 +163,12 @@ and the reloaded target would be non-functional.
 
 
 The layout of the formatted block device:
-* reserved sectors (they are not used by this target, they can be used for
-  storing LUKS metadata or for other purpose), the size of the reserved
-  area is specified in the target arguments
+
+* reserved sectors
+    (they are not used by this target, they can be used for
+    storing LUKS metadata or for other purpose), the size of the reserved
+    area is specified in the target arguments
+
 * superblock (4kiB)
 	* magic string - identifies that the device was formatted
 	* version
@@ -168,34 +180,47 @@ The layout of the formatted block device:
 	  metadata and padding). The user of this target should not send
 	  bios that access data beyond the "provided data sectors" limit.
 	* flags - a flag is set if journal_mac is used
+
 * journal
 	The journal is divided into sections, each section contains:
+
 	* metadata area (4kiB), it contains journal entries
-	  every journal entry contains:
+
+	  - every journal entry contains:
+
 		* logical sector (specifies where the data and tag should
 		  be written)
 		* last 8 bytes of data
 		* integrity tag (the size is specified in the superblock)
-	    every metadata sector ends with
+
+	  - every metadata sector ends with
+
 		* mac (8-bytes), all the macs in 8 metadata sectors form a
 		  64-byte value. It is used to store hmac of sector
 		  numbers in the journal section, to protect against a
 		  possibility that the attacker tampers with sector
 		  numbers in the journal.
 		* commit id
+
 	* data area (the size is variable; it depends on how many journal
 	  entries fit into the metadata area)
-	    every sector in the data area contains:
+
+	    - every sector in the data area contains:
+
 		* data (504 bytes of data, the last 8 bytes are stored in
 		  the journal entry)
 		* commit id
+
 	To test if the whole journal section was written correctly, every
 	512-byte sector of the journal ends with 8-byte commit id. If the
 	commit id matches on all sectors in a journal section, then it is
 	assumed that the section was written correctly. If the commit id
 	doesn't match, the section was written partially and it should not
 	be replayed.
-* one or more runs of interleaved tags and data. Each run contains:
+
+* one or more runs of interleaved tags and data.
+    Each run contains:
+
 	* tag area - it contains integrity tags. There is one tag for each
 	  sector in the data area
 	* data area - it contains data sectors. The number of data sectors
diff --git a/Documentation/device-mapper/dm-io.txt b/Documentation/device-mapper/dm-io.rst
similarity index 92%
rename from Documentation/device-mapper/dm-io.txt
rename to Documentation/device-mapper/dm-io.rst
index 3b5d9a52cdcf..d2492917a1f5 100644
--- a/Documentation/device-mapper/dm-io.txt
+++ b/Documentation/device-mapper/dm-io.rst
@@ -1,3 +1,4 @@
+=====
 dm-io
 =====
 
@@ -7,7 +8,7 @@ version.
 
 The user must set up an io_region structure to describe the desired location
 of the I/O. Each io_region indicates a block-device along with the starting
-sector and size of the region.
+sector and size of the region::
 
    struct io_region {
       struct block_device *bdev;
@@ -19,7 +20,7 @@ Dm-io can read from one io_region or write to one or more io_regions. Writes
 to multiple regions are specified by an array of io_region structures.
 
 The first I/O service type takes a list of memory pages as the data buffer for
-the I/O, along with an offset into the first page.
+the I/O, along with an offset into the first page::
 
    struct page_list {
       struct page_list *next;
@@ -35,7 +36,7 @@ the I/O, along with an offset into the first page.
 
 The second I/O service type takes an array of bio vectors as the data buffer
 for the I/O. This service can be handy if the caller has a pre-assembled bio,
-but wants to direct different portions of the bio to different devices.
+but wants to direct different portions of the bio to different devices::
 
    int dm_io_sync_bvec(unsigned int num_regions, struct io_region *where,
                        int rw, struct bio_vec *bvec,
@@ -47,7 +48,7 @@ but wants to direct different portions of the bio to different devices.
 The third I/O service type takes a pointer to a vmalloc'd memory buffer as the
 data buffer for the I/O. This service can be handy if the caller needs to do
 I/O to a large region but doesn't want to allocate a large number of individual
-memory pages.
+memory pages::
 
    int dm_io_sync_vm(unsigned int num_regions, struct io_region *where, int rw,
                      void *data, unsigned long *error_bits);
@@ -55,11 +56,11 @@ memory pages.
                       void *data, io_notify_fn fn, void *context);
 
 Callers of the asynchronous I/O services must include the name of a completion
-callback routine and a pointer to some context data for the I/O.
+callback routine and a pointer to some context data for the I/O::
 
    typedef void (*io_notify_fn)(unsigned long error, void *context);
 
-The "error" parameter in this callback, as well as the "*error" parameter in
+The "error" parameter in this callback, as well as the `*error` parameter in
 all of the synchronous versions, is a bitset (instead of a simple error value).
 In the case of an write-I/O to multiple regions, this bitset allows dm-io to
 indicate success or failure on each individual region.
@@ -72,4 +73,3 @@ always available in order to avoid unnecessary waiting while performing I/O.
 When the user is finished using the dm-io services, they should call
 dm_io_put() and specify the same number of pages that were given on the
 dm_io_get() call.
-
diff --git a/Documentation/device-mapper/dm-log.txt b/Documentation/device-mapper/dm-log.rst
similarity index 90%
rename from Documentation/device-mapper/dm-log.txt
rename to Documentation/device-mapper/dm-log.rst
index c155ac569c44..ba4fce39bc27 100644
--- a/Documentation/device-mapper/dm-log.txt
+++ b/Documentation/device-mapper/dm-log.rst
@@ -1,3 +1,4 @@
+=====================
 Device-Mapper Logging
 =====================
 The device-mapper logging code is used by some of the device-mapper
@@ -16,11 +17,13 @@ dm_dirty_log_type in include/linux/dm-dirty-log.h).  Various different
 logging implementations are available and provide different
 capabilities.  The list includes:
 
+==============	==============================================================
 Type		Files
-====		=====
+==============	==============================================================
 disk		drivers/md/dm-log.c
 core		drivers/md/dm-log.c
 userspace	drivers/md/dm-log-userspace* include/linux/dm-log-userspace.h
+==============	==============================================================
 
 The "disk" log type
 -------------------
diff --git a/Documentation/device-mapper/dm-queue-length.txt b/Documentation/device-mapper/dm-queue-length.rst
similarity index 76%
rename from Documentation/device-mapper/dm-queue-length.txt
rename to Documentation/device-mapper/dm-queue-length.rst
index f4db2562175c..d8e381c1cb02 100644
--- a/Documentation/device-mapper/dm-queue-length.txt
+++ b/Documentation/device-mapper/dm-queue-length.rst
@@ -1,3 +1,4 @@
+===============
 dm-queue-length
 ===============
 
@@ -6,12 +7,18 @@ which selects a path with the least number of in-flight I/Os.
 The path selector name is 'queue-length'.
 
 Table parameters for each path: [<repeat_count>]
+
+::
+
 	<repeat_count>: The number of I/Os to dispatch using the selected
 			path before switching to the next path.
 			If not given, internal default is used. To check
 			the default value, see the activated table.
 
 Status for each path: <status> <fail-count> <in-flight>
+
+::
+
 	<status>: 'A' if the path is active, 'F' if the path is failed.
 	<fail-count>: The number of path failures.
 	<in-flight>: The number of in-flight I/Os on the path.
@@ -29,11 +36,13 @@ Examples
 ========
 In case that 2 paths (sda and sdb) are used with repeat_count == 128.
 
-# echo "0 10 multipath 0 0 1 1 queue-length 0 2 1 8:0 128 8:16 128" \
-  dmsetup create test
-#
-# dmsetup table
-test: 0 10 multipath 0 0 1 1 queue-length 0 2 1 8:0 128 8:16 128
-#
-# dmsetup status
-test: 0 10 multipath 2 0 0 0 1 1 E 0 2 1 8:0 A 0 0 8:16 A 0 0
+::
+
+  # echo "0 10 multipath 0 0 1 1 queue-length 0 2 1 8:0 128 8:16 128" \
+    dmsetup create test
+  #
+  # dmsetup table
+  test: 0 10 multipath 0 0 1 1 queue-length 0 2 1 8:0 128 8:16 128
+  #
+  # dmsetup status
+  test: 0 10 multipath 2 0 0 0 1 1 E 0 2 1 8:0 A 0 0 8:16 A 0 0
diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.rst
similarity index 71%
rename from Documentation/device-mapper/dm-raid.txt
rename to Documentation/device-mapper/dm-raid.rst
index 2355bef14653..2fe255b130fb 100644
--- a/Documentation/device-mapper/dm-raid.txt
+++ b/Documentation/device-mapper/dm-raid.rst
@@ -1,3 +1,4 @@
+=======
 dm-raid
 =======
 
@@ -8,49 +9,66 @@ interface.
 
 Mapping Table Interface
 -----------------------
-The target is named "raid" and it accepts the following parameters:
+The target is named "raid" and it accepts the following parameters::
 
   <raid_type> <#raid_params> <raid_params> \
     <#raid_devs> <metadata_dev0> <dev0> [.. <metadata_devN> <devN>]
 
 <raid_type>:
+
+  ============= ===============================================================
   raid0		RAID0 striping (no resilience)
   raid1		RAID1 mirroring
   raid4		RAID4 with dedicated last parity disk
   raid5_n 	RAID5 with dedicated last parity disk supporting takeover
 		Same as raid4
-		-Transitory layout
+
+		- Transitory layout
   raid5_la	RAID5 left asymmetric
+
 		- rotating parity 0 with data continuation
   raid5_ra	RAID5 right asymmetric
+
 		- rotating parity N with data continuation
   raid5_ls	RAID5 left symmetric
+
 		- rotating parity 0 with data restart
   raid5_rs 	RAID5 right symmetric
+
 		- rotating parity N with data restart
   raid6_zr	RAID6 zero restart
+
 		- rotating parity zero (left-to-right) with data restart
   raid6_nr	RAID6 N restart
+
 		- rotating parity N (right-to-left) with data restart
   raid6_nc	RAID6 N continue
+
 		- rotating parity N (right-to-left) with data continuation
   raid6_n_6	RAID6 with dedicate parity disks
+
 		- parity and Q-syndrome on the last 2 disks;
 		  layout for takeover from/to raid4/raid5_n
   raid6_la_6	Same as "raid_la" plus dedicated last Q-syndrome disk
+
 		- layout for takeover from raid5_la from/to raid6
   raid6_ra_6	Same as "raid5_ra" dedicated last Q-syndrome disk
+
 		- layout for takeover from raid5_ra from/to raid6
   raid6_ls_6	Same as "raid5_ls" dedicated last Q-syndrome disk
+
 		- layout for takeover from raid5_ls from/to raid6
   raid6_rs_6	Same as "raid5_rs" dedicated last Q-syndrome disk
+
 		- layout for takeover from raid5_rs from/to raid6
   raid10        Various RAID10 inspired algorithms chosen by additional params
 		(see raid10_format and raid10_copies below)
+
 		- RAID10: Striped Mirrors (aka 'Striping on top of mirrors')
 		- RAID1E: Integrated Adjacent Stripe Mirroring
 		- RAID1E: Integrated Offset Stripe Mirroring
-		-  and other similar RAID10 variants
+		- and other similar RAID10 variants
+  ============= ===============================================================
 
   Reference: Chapter 4 of
   http://www.snia.org/sites/default/files/SNIA_DDF_Technical_Position_v2.0.pdf
@@ -58,33 +76,41 @@ The target is named "raid" and it accepts the following parameters:
 <#raid_params>: The number of parameters that follow.
 
 <raid_params> consists of
+
     Mandatory parameters:
-        <chunk_size>: Chunk size in sectors.  This parameter is often known as
+        <chunk_size>:
+		      Chunk size in sectors.  This parameter is often known as
 		      "stripe size".  It is the only mandatory parameter and
 		      is placed first.
 
     followed by optional parameters (in any order):
-	[sync|nosync]   Force or prevent RAID initialization.
+	[sync|nosync]
+		Force or prevent RAID initialization.
 
-	[rebuild <idx>]	Rebuild drive number 'idx' (first drive is 0).
+	[rebuild <idx>]
+		Rebuild drive number 'idx' (first drive is 0).
 
 	[daemon_sleep <ms>]
 		Interval between runs of the bitmap daemon that
 		clear bits.  A longer interval means less bitmap I/O but
 		resyncing after a failure is likely to take longer.
 
-	[min_recovery_rate <kB/sec/disk>]  Throttle RAID initialization
-	[max_recovery_rate <kB/sec/disk>]  Throttle RAID initialization
-	[write_mostly <idx>]		   Mark drive index 'idx' write-mostly.
-	[max_write_behind <sectors>]       See '--write-behind=' (man mdadm)
-	[stripe_cache <sectors>]           Stripe cache size (RAID 4/5/6 only)
+	[min_recovery_rate <kB/sec/disk>]
+		Throttle RAID initialization
+	[max_recovery_rate <kB/sec/disk>]
+		Throttle RAID initialization
+	[write_mostly <idx>]
+		Mark drive index 'idx' write-mostly.
+	[max_write_behind <sectors>]
+		See '--write-behind=' (man mdadm)
+	[stripe_cache <sectors>]
+		Stripe cache size (RAID 4/5/6 only)
 	[region_size <sectors>]
 		The region_size multiplied by the number of regions is the
 		logical size of the array.  The bitmap records the device
 		synchronisation state for each region.
 
-        [raid10_copies   <# copies>]
-        [raid10_format   <near|far|offset>]
+        [raid10_copies   <# copies>], [raid10_format   <near|far|offset>]
 		These two options are used to alter the default layout of
 		a RAID10 configuration.  The number of copies is can be
 		specified, but the default is 2.  There are also three
@@ -93,13 +119,17 @@ The target is named "raid" and it accepts the following parameters:
 		respect to mirroring.  If these options are left unspecified,
 		or 'raid10_copies 2' and/or 'raid10_format near' are given,
 		then the layouts for 2, 3 and 4 devices	are:
+
+		========	 ==========	   ==============
 		2 drives         3 drives          4 drives
-		--------         ----------        --------------
+		========	 ==========	   ==============
 		A1  A1           A1  A1  A2        A1  A1  A2  A2
 		A2  A2           A2  A3  A3        A3  A3  A4  A4
 		A3  A3           A4  A4  A5        A5  A5  A6  A6
 		A4  A4           A5  A6  A6        A7  A7  A8  A8
 		..  ..           ..  ..  ..        ..  ..  ..  ..
+		========	 ==========	   ==============
+
 		The 2-device layout is equivalent 2-way RAID1.  The 4-device
 		layout is what a traditional RAID10 would look like.  The
 		3-device layout is what might be called a 'RAID1E - Integrated
@@ -107,8 +137,10 @@ The target is named "raid" and it accepts the following parameters:
 
 		If 'raid10_copies 2' and 'raid10_format far', then the layouts
 		for 2, 3 and 4 devices are:
+
+		========	     ============	  ===================
 		2 drives             3 drives             4 drives
-		--------             --------------       --------------------
+		========	     ============	  ===================
 		A1  A2               A1   A2   A3         A1   A2   A3   A4
 		A3  A4               A4   A5   A6         A5   A6   A7   A8
 		A5  A6               A7   A8   A9         A9   A10  A11  A12
@@ -117,11 +149,14 @@ The target is named "raid" and it accepts the following parameters:
 		A4  A3               A6   A4   A5         A6   A5   A8   A7
 		A6  A5               A9   A7   A8         A10  A9   A12  A11
 		..  ..               ..   ..   ..         ..   ..   ..   ..
+		========	     ============	  ===================
 
 		If 'raid10_copies 2' and 'raid10_format offset', then the
 		layouts for 2, 3 and 4 devices are:
+
+		========       ==========         ================
 		2 drives       3 drives           4 drives
-		--------       ------------       -----------------
+		========       ==========         ================
 		A1  A2         A1  A2  A3         A1  A2  A3  A4
 		A2  A1         A3  A1  A2         A2  A1  A4  A3
 		A3  A4         A4  A5  A6         A5  A6  A7  A8
@@ -129,6 +164,8 @@ The target is named "raid" and it accepts the following parameters:
 		A5  A6         A7  A8  A9         A9  A10 A11 A12
 		A6  A5         A9  A7  A8         A10 A9  A12 A11
 		..  ..         ..  ..  ..         ..  ..  ..  ..
+		========       ==========         ================
+
 		Here we see layouts closely akin to 'RAID1E - Integrated
 		Offset Stripe Mirroring'.
 
@@ -190,22 +227,25 @@ The target is named "raid" and it accepts the following parameters:
 
 Example Tables
 --------------
-# RAID4 - 4 data drives, 1 parity (no metadata devices)
-# No metadata devices specified to hold superblock/bitmap info
-# Chunk size of 1MiB
-# (Lines separated for easy reading)
 
-0 1960893648 raid \
-        raid4 1 2048 \
-        5 - 8:17 - 8:33 - 8:49 - 8:65 - 8:81
+::
 
-# RAID4 - 4 data drives, 1 parity (with metadata devices)
-# Chunk size of 1MiB, force RAID initialization,
-#       min recovery rate at 20 kiB/sec/disk
+  # RAID4 - 4 data drives, 1 parity (no metadata devices)
+  # No metadata devices specified to hold superblock/bitmap info
+  # Chunk size of 1MiB
+  # (Lines separated for easy reading)
 
-0 1960893648 raid \
-        raid4 4 2048 sync min_recovery_rate 20 \
-        5 8:17 8:18 8:33 8:34 8:49 8:50 8:65 8:66 8:81 8:82
+  0 1960893648 raid \
+          raid4 1 2048 \
+          5 - 8:17 - 8:33 - 8:49 - 8:65 - 8:81
+
+  # RAID4 - 4 data drives, 1 parity (with metadata devices)
+  # Chunk size of 1MiB, force RAID initialization,
+  #       min recovery rate at 20 kiB/sec/disk
+
+  0 1960893648 raid \
+          raid4 4 2048 sync min_recovery_rate 20 \
+          5 8:17 8:18 8:33 8:34 8:49 8:50 8:65 8:66 8:81 8:82
 
 
 Status Output
@@ -219,41 +259,58 @@ Arguments that can be repeated are ordered by value.
 
 'dmsetup status' yields information on the state and health of the array.
 The output is as follows (normally a single line, but expanded here for
-clarity):
-1: <s> <l> raid \
-2:      <raid_type> <#devices> <health_chars> \
-3:      <sync_ratio> <sync_action> <mismatch_cnt>
+clarity)::
+
+  1: <s> <l> raid \
+  2:      <raid_type> <#devices> <health_chars> \
+  3:      <sync_ratio> <sync_action> <mismatch_cnt>
 
 Line 1 is the standard output produced by device-mapper.
-Line 2 & 3 are produced by the raid target and are best explained by example:
+
+Line 2 & 3 are produced by the raid target and are best explained by example::
+
         0 1960893648 raid raid4 5 AAAAA 2/490221568 init 0
+
 Here we can see the RAID type is raid4, there are 5 devices - all of
 which are 'A'live, and the array is 2/490221568 complete with its initial
 recovery.  Here is a fuller description of the individual fields:
+
+	=============== =========================================================
 	<raid_type>     Same as the <raid_type> used to create the array.
-	<health_chars>  One char for each device, indicating: 'A' = alive and
-			in-sync, 'a' = alive but not in-sync, 'D' = dead/failed.
+	<health_chars>  One char for each device, indicating:
+
+			- 'A' = alive and in-sync
+			- 'a' = alive but not in-sync
+			- 'D' = dead/failed.
 	<sync_ratio>    The ratio indicating how much of the array has undergone
 			the process described by 'sync_action'.  If the
 			'sync_action' is "check" or "repair", then the process
 			of "resync" or "recover" can be considered complete.
 	<sync_action>   One of the following possible states:
-			idle    - No synchronization action is being performed.
-			frozen  - The current action has been halted.
-			resync  - Array is undergoing its initial synchronization
+
+			idle
+				- No synchronization action is being performed.
+			frozen
+				- The current action has been halted.
+			resync
+				- Array is undergoing its initial synchronization
 				  or is resynchronizing after an unclean shutdown
 				  (possibly aided by a bitmap).
-			recover - A device in the array is being rebuilt or
+			recover
+				- A device in the array is being rebuilt or
 				  replaced.
-			check   - A user-initiated full check of the array is
+			check
+				- A user-initiated full check of the array is
 				  being performed.  All blocks are read and
 				  checked for consistency.  The number of
 				  discrepancies found are recorded in
 				  <mismatch_cnt>.  No changes are made to the
 				  array by this action.
-			repair  - The same as "check", but discrepancies are
+			repair
+				- The same as "check", but discrepancies are
 				  corrected.
-			reshape - The array is undergoing a reshape.
+			reshape
+				- The array is undergoing a reshape.
 	<mismatch_cnt>  The number of discrepancies found between mirror copies
 			in RAID1/10 or wrong parity values found in RAID4/5/6.
 			This value is valid only after a "check" of the array
@@ -261,10 +318,11 @@ recovery.  Here is a fuller description of the individual fields:
 	<data_offset>   The current data offset to the start of the user data on
 			each component device of a raid set (see the respective
 			raid parameter to support out-of-place reshaping).
-	<journal_char>	'A' - active write-through journal device.
-			'a' - active write-back journal device.
-			'D' - dead journal device.
-			'-' - no journal device.
+	<journal_char>	- 'A' - active write-through journal device.
+			- 'a' - active write-back journal device.
+			- 'D' - dead journal device.
+			- '-' - no journal device.
+	=============== =========================================================
 
 
 Message Interface
@@ -272,12 +330,15 @@ Message Interface
 The dm-raid target will accept certain actions through the 'message' interface.
 ('man dmsetup' for more information on the message interface.)  These actions
 include:
-	"idle"   - Halt the current sync action.
-	"frozen" - Freeze the current sync action.
-	"resync" - Initiate/continue a resync.
-	"recover"- Initiate/continue a recover process.
-	"check"  - Initiate a check (i.e. a "scrub") of the array.
-	"repair" - Initiate a repair of the array.
+
+	========= ================================================
+	"idle"    Halt the current sync action.
+	"frozen"  Freeze the current sync action.
+	"resync"  Initiate/continue a resync.
+	"recover" Initiate/continue a recover process.
+	"check"   Initiate a check (i.e. a "scrub") of the array.
+	"repair"  Initiate a repair of the array.
+	========= ================================================
 
 
 Discard Support
@@ -307,48 +368,52 @@ increasingly whitelisted in the kernel and can thus be trusted.
 
 For trusted devices, the following dm-raid module parameter can be set
 to safely enable discard support for RAID 4/5/6:
+
     'devices_handle_discards_safely'
 
 
 Version History
 ---------------
-1.0.0	Initial version.  Support for RAID 4/5/6
-1.1.0	Added support for RAID 1
-1.2.0	Handle creation of arrays that contain failed devices.
-1.3.0	Added support for RAID 10
-1.3.1	Allow device replacement/rebuild for RAID 10
-1.3.2   Fix/improve redundancy checking for RAID10
-1.4.0	Non-functional change.  Removes arg from mapping function.
-1.4.1   RAID10 fix redundancy validation checks (commit 55ebbb5).
-1.4.2   Add RAID10 "far" and "offset" algorithm support.
-1.5.0   Add message interface to allow manipulation of the sync_action.
+
+::
+
+ 1.0.0	Initial version.  Support for RAID 4/5/6
+ 1.1.0	Added support for RAID 1
+ 1.2.0	Handle creation of arrays that contain failed devices.
+ 1.3.0	Added support for RAID 10
+ 1.3.1	Allow device replacement/rebuild for RAID 10
+ 1.3.2	Fix/improve redundancy checking for RAID10
+ 1.4.0	Non-functional change.  Removes arg from mapping function.
+ 1.4.1	RAID10 fix redundancy validation checks (commit 55ebbb5).
+ 1.4.2	Add RAID10 "far" and "offset" algorithm support.
+ 1.5.0	Add message interface to allow manipulation of the sync_action.
 	New status (STATUSTYPE_INFO) fields: sync_action and mismatch_cnt.
-1.5.1   Add ability to restore transiently failed devices on resume.
-1.5.2   'mismatch_cnt' is zero unless [last_]sync_action is "check".
-1.6.0   Add discard support (and devices_handle_discard_safely module param).
-1.7.0   Add support for MD RAID0 mappings.
-1.8.0   Explicitly check for compatible flags in the superblock metadata
+ 1.5.1	Add ability to restore transiently failed devices on resume.
+ 1.5.2	'mismatch_cnt' is zero unless [last_]sync_action is "check".
+ 1.6.0	Add discard support (and devices_handle_discard_safely module param).
+ 1.7.0	Add support for MD RAID0 mappings.
+ 1.8.0	Explicitly check for compatible flags in the superblock metadata
 	and reject to start the raid set if any are set by a newer
 	target version, thus avoiding data corruption on a raid set
 	with a reshape in progress.
-1.9.0   Add support for RAID level takeover/reshape/region size
+ 1.9.0	Add support for RAID level takeover/reshape/region size
 	and set size reduction.
-1.9.1   Fix activation of existing RAID 4/10 mapped devices
-1.9.2   Don't emit '- -' on the status table line in case the constructor
+ 1.9.1	Fix activation of existing RAID 4/10 mapped devices
+ 1.9.2	Don't emit '- -' on the status table line in case the constructor
 	fails reading a superblock. Correctly emit 'maj:min1 maj:min2' and
 	'D' on the status line.  If '- -' is passed into the constructor, emit
 	'- -' on the table line and '-' as the status line health character.
-1.10.0  Add support for raid4/5/6 journal device
-1.10.1  Fix data corruption on reshape request
-1.11.0  Fix table line argument order
+ 1.10.0	Add support for raid4/5/6 journal device
+ 1.10.1	Fix data corruption on reshape request
+ 1.11.0	Fix table line argument order
 	(wrong raid10_copies/raid10_format sequence)
-1.11.1  Add raid4/5/6 journal write-back support via journal_mode option
-1.12.1  Fix for MD deadlock between mddev_suspend() and md_write_start() available
-1.13.0  Fix dev_health status at end of "recover" (was 'a', now 'A')
-1.13.1  Fix deadlock caused by early md_stop_writes().  Also fix size an
+ 1.11.1	Add raid4/5/6 journal write-back support via journal_mode option
+ 1.12.1	Fix for MD deadlock between mddev_suspend() and md_write_start() available
+ 1.13.0	Fix dev_health status at end of "recover" (was 'a', now 'A')
+ 1.13.1	Fix deadlock caused by early md_stop_writes().  Also fix size an
 	state races.
-1.13.2  Fix raid redundancy validation and avoid keeping raid set frozen
-1.14.0  Fix reshape race on small devices.  Fix stripe adding reshape
+ 1.13.2	Fix raid redundancy validation and avoid keeping raid set frozen
+ 1.14.0	Fix reshape race on small devices.  Fix stripe adding reshape
 	deadlock/potential data corruption.  Update superblock when
 	specific devices are requested via rebuild.  Fix RAID leg
 	rebuild errors.
diff --git a/Documentation/device-mapper/dm-service-time.txt b/Documentation/device-mapper/dm-service-time.rst
similarity index 60%
rename from Documentation/device-mapper/dm-service-time.txt
rename to Documentation/device-mapper/dm-service-time.rst
index fb1d4a0cf122..facf277fc13c 100644
--- a/Documentation/device-mapper/dm-service-time.txt
+++ b/Documentation/device-mapper/dm-service-time.rst
@@ -1,3 +1,4 @@
+===============
 dm-service-time
 ===============
 
@@ -12,25 +13,34 @@ in a path-group, and it can be specified as a table argument.
 
 The path selector name is 'service-time'.
 
-Table parameters for each path: [<repeat_count> [<relative_throughput>]]
-	<repeat_count>: The number of I/Os to dispatch using the selected
+Table parameters for each path:
+
+    [<repeat_count> [<relative_throughput>]]
+	<repeat_count>:
+			The number of I/Os to dispatch using the selected
 			path before switching to the next path.
 			If not given, internal default is used.  To check
 			the default value, see the activated table.
-	<relative_throughput>: The relative throughput value of the path
+	<relative_throughput>:
+			The relative throughput value of the path
 			among all paths in the path-group.
 			The valid range is 0-100.
 			If not given, minimum value '1' is used.
 			If '0' is given, the path isn't selected while
 			other paths having a positive value are available.
 
-Status for each path: <status> <fail-count> <in-flight-size> \
-		      <relative_throughput>
-	<status>: 'A' if the path is active, 'F' if the path is failed.
-	<fail-count>: The number of path failures.
-	<in-flight-size>: The size of in-flight I/Os on the path.
-	<relative_throughput>: The relative throughput value of the path
-			among all paths in the path-group.
+Status for each path:
+
+    <status> <fail-count> <in-flight-size> <relative_throughput>
+	<status>:
+		'A' if the path is active, 'F' if the path is failed.
+	<fail-count>:
+		The number of path failures.
+	<in-flight-size>:
+		The size of in-flight I/Os on the path.
+	<relative_throughput>:
+		The relative throughput value of the path
+		among all paths in the path-group.
 
 
 Algorithm
@@ -39,7 +49,7 @@ Algorithm
 dm-service-time adds the I/O size to 'in-flight-size' when the I/O is
 dispatched and subtracts when completed.
 Basically, dm-service-time selects a path having minimum service time
-which is calculated by:
+which is calculated by::
 
 	('in-flight-size' + 'size-of-incoming-io') / 'relative_throughput'
 
@@ -67,25 +77,25 @@ Examples
 ========
 In case that 2 paths (sda and sdb) are used with repeat_count == 128
 and sda has an average throughput 1GB/s and sdb has 4GB/s,
-'relative_throughput' value may be '1' for sda and '4' for sdb.
+'relative_throughput' value may be '1' for sda and '4' for sdb::
 
-# echo "0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 1 8:16 128 4" \
-  dmsetup create test
-#
-# dmsetup table
-test: 0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 1 8:16 128 4
-#
-# dmsetup status
-test: 0 10 multipath 2 0 0 0 1 1 E 0 2 2 8:0 A 0 0 1 8:16 A 0 0 4
+  # echo "0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 1 8:16 128 4" \
+    dmsetup create test
+  #
+  # dmsetup table
+  test: 0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 1 8:16 128 4
+  #
+  # dmsetup status
+  test: 0 10 multipath 2 0 0 0 1 1 E 0 2 2 8:0 A 0 0 1 8:16 A 0 0 4
 
 
-Or '2' for sda and '8' for sdb would be also true.
+Or '2' for sda and '8' for sdb would be also true::
 
-# echo "0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 2 8:16 128 8" \
-  dmsetup create test
-#
-# dmsetup table
-test: 0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 2 8:16 128 8
-#
-# dmsetup status
-test: 0 10 multipath 2 0 0 0 1 1 E 0 2 2 8:0 A 0 0 2 8:16 A 0 0 8
+  # echo "0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 2 8:16 128 8" \
+    dmsetup create test
+  #
+  # dmsetup table
+  test: 0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 2 8:16 128 8
+  #
+  # dmsetup status
+  test: 0 10 multipath 2 0 0 0 1 1 E 0 2 2 8:0 A 0 0 2 8:16 A 0 0 8
diff --git a/Documentation/device-mapper/dm-uevent.rst b/Documentation/device-mapper/dm-uevent.rst
new file mode 100644
index 000000000000..4a8ee8d069c9
--- /dev/null
+++ b/Documentation/device-mapper/dm-uevent.rst
@@ -0,0 +1,110 @@
+====================
+device-mapper uevent
+====================
+
+The device-mapper uevent code adds the capability to device-mapper to create
+and send kobject uevents (uevents).  Previously device-mapper events were only
+available through the ioctl interface.  The advantage of the uevents interface
+is the event contains environment attributes providing increased context for
+the event avoiding the need to query the state of the device-mapper device after
+the event is received.
+
+There are two functions currently for device-mapper events.  The first function
+listed creates the event and the second function sends the event(s)::
+
+  void dm_path_uevent(enum dm_uevent_type event_type, struct dm_target *ti,
+                      const char *path, unsigned nr_valid_paths)
+
+  void dm_send_uevents(struct list_head *events, struct kobject *kobj)
+
+
+The variables added to the uevent environment are:
+
+Variable Name: DM_TARGET
+------------------------
+:Uevent Action(s): KOBJ_CHANGE
+:Type: string
+:Description:
+:Value: Name of device-mapper target that generated the event.
+
+Variable Name: DM_ACTION
+------------------------
+:Uevent Action(s): KOBJ_CHANGE
+:Type: string
+:Description:
+:Value: Device-mapper specific action that caused the uevent action.
+	PATH_FAILED - A path has failed;
+	PATH_REINSTATED - A path has been reinstated.
+
+Variable Name: DM_SEQNUM
+------------------------
+:Uevent Action(s): KOBJ_CHANGE
+:Type: unsigned integer
+:Description: A sequence number for this specific device-mapper device.
+:Value: Valid unsigned integer range.
+
+Variable Name: DM_PATH
+----------------------
+:Uevent Action(s): KOBJ_CHANGE
+:Type: string
+:Description: Major and minor number of the path device pertaining to this
+	      event.
+:Value: Path name in the form of "Major:Minor"
+
+Variable Name: DM_NR_VALID_PATHS
+--------------------------------
+:Uevent Action(s): KOBJ_CHANGE
+:Type: unsigned integer
+:Description:
+:Value: Valid unsigned integer range.
+
+Variable Name: DM_NAME
+----------------------
+:Uevent Action(s): KOBJ_CHANGE
+:Type: string
+:Description: Name of the device-mapper device.
+:Value: Name
+
+Variable Name: DM_UUID
+----------------------
+:Uevent Action(s): KOBJ_CHANGE
+:Type: string
+:Description: UUID of the device-mapper device.
+:Value: UUID. (Empty string if there isn't one.)
+
+An example of the uevents generated as captured by udevmonitor is shown
+below
+
+1.) Path failure::
+
+	UEVENT[1192521009.711215] change@/block/dm-3
+	ACTION=change
+	DEVPATH=/block/dm-3
+	SUBSYSTEM=block
+	DM_TARGET=multipath
+	DM_ACTION=PATH_FAILED
+	DM_SEQNUM=1
+	DM_PATH=8:32
+	DM_NR_VALID_PATHS=0
+	DM_NAME=mpath2
+	DM_UUID=mpath-35333333000002328
+	MINOR=3
+	MAJOR=253
+	SEQNUM=1130
+
+2.) Path reinstate::
+
+	UEVENT[1192521132.989927] change@/block/dm-3
+	ACTION=change
+	DEVPATH=/block/dm-3
+	SUBSYSTEM=block
+	DM_TARGET=multipath
+	DM_ACTION=PATH_REINSTATED
+	DM_SEQNUM=2
+	DM_PATH=8:32
+	DM_NR_VALID_PATHS=1
+	DM_NAME=mpath2
+	DM_UUID=mpath-35333333000002328
+	MINOR=3
+	MAJOR=253
+	SEQNUM=1131
diff --git a/Documentation/device-mapper/dm-uevent.txt b/Documentation/device-mapper/dm-uevent.txt
deleted file mode 100644
index 07edbd85c714..000000000000
--- a/Documentation/device-mapper/dm-uevent.txt
+++ /dev/null
@@ -1,97 +0,0 @@
-The device-mapper uevent code adds the capability to device-mapper to create
-and send kobject uevents (uevents).  Previously device-mapper events were only
-available through the ioctl interface.  The advantage of the uevents interface
-is the event contains environment attributes providing increased context for
-the event avoiding the need to query the state of the device-mapper device after
-the event is received.
-
-There are two functions currently for device-mapper events.  The first function
-listed creates the event and the second function sends the event(s).
-
-void dm_path_uevent(enum dm_uevent_type event_type, struct dm_target *ti,
-                    const char *path, unsigned nr_valid_paths)
-
-void dm_send_uevents(struct list_head *events, struct kobject *kobj)
-
-
-The variables added to the uevent environment are:
-
-Variable Name: DM_TARGET
-Uevent Action(s): KOBJ_CHANGE
-Type: string
-Description:
-Value: Name of device-mapper target that generated the event.
-
-Variable Name: DM_ACTION
-Uevent Action(s): KOBJ_CHANGE
-Type: string
-Description:
-Value: Device-mapper specific action that caused the uevent action.
-	PATH_FAILED - A path has failed.
-	PATH_REINSTATED - A path has been reinstated.
-
-Variable Name: DM_SEQNUM
-Uevent Action(s): KOBJ_CHANGE
-Type: unsigned integer
-Description: A sequence number for this specific device-mapper device.
-Value: Valid unsigned integer range.
-
-Variable Name: DM_PATH
-Uevent Action(s): KOBJ_CHANGE
-Type: string
-Description: Major and minor number of the path device pertaining to this
-event.
-Value: Path name in the form of "Major:Minor"
-
-Variable Name: DM_NR_VALID_PATHS
-Uevent Action(s): KOBJ_CHANGE
-Type: unsigned integer
-Description:
-Value: Valid unsigned integer range.
-
-Variable Name: DM_NAME
-Uevent Action(s): KOBJ_CHANGE
-Type: string
-Description: Name of the device-mapper device.
-Value: Name
-
-Variable Name: DM_UUID
-Uevent Action(s): KOBJ_CHANGE
-Type: string
-Description: UUID of the device-mapper device.
-Value: UUID. (Empty string if there isn't one.)
-
-An example of the uevents generated as captured by udevmonitor is shown
-below.
-
-1.) Path failure.
-UEVENT[1192521009.711215] change@/block/dm-3
-ACTION=change
-DEVPATH=/block/dm-3
-SUBSYSTEM=block
-DM_TARGET=multipath
-DM_ACTION=PATH_FAILED
-DM_SEQNUM=1
-DM_PATH=8:32
-DM_NR_VALID_PATHS=0
-DM_NAME=mpath2
-DM_UUID=mpath-35333333000002328
-MINOR=3
-MAJOR=253
-SEQNUM=1130
-
-2.) Path reinstate.
-UEVENT[1192521132.989927] change@/block/dm-3
-ACTION=change
-DEVPATH=/block/dm-3
-SUBSYSTEM=block
-DM_TARGET=multipath
-DM_ACTION=PATH_REINSTATED
-DM_SEQNUM=2
-DM_PATH=8:32
-DM_NR_VALID_PATHS=1
-DM_NAME=mpath2
-DM_UUID=mpath-35333333000002328
-MINOR=3
-MAJOR=253
-SEQNUM=1131
diff --git a/Documentation/device-mapper/dm-zoned.txt b/Documentation/device-mapper/dm-zoned.rst
similarity index 97%
rename from Documentation/device-mapper/dm-zoned.txt
rename to Documentation/device-mapper/dm-zoned.rst
index 736fcc78d193..07f56ebc1730 100644
--- a/Documentation/device-mapper/dm-zoned.txt
+++ b/Documentation/device-mapper/dm-zoned.rst
@@ -1,3 +1,4 @@
+========
 dm-zoned
 ========
 
@@ -133,12 +134,13 @@ A zoned block device must first be formatted using the dmzadm tool. This
 will analyze the device zone configuration, determine where to place the
 metadata sets on the device and initialize the metadata sets.
 
-Ex:
+Ex::
 
-dmzadm --format /dev/sdxx
+	dmzadm --format /dev/sdxx
 
 For a formatted device, the target can be created normally with the
 dmsetup utility. The only parameter that dm-zoned requires is the
-underlying zoned block device name. Ex:
+underlying zoned block device name. Ex::
 
-echo "0 `blockdev --getsize ${dev}` zoned ${dev}" | dmsetup create dmz-`basename ${dev}`
+	echo "0 `blockdev --getsize ${dev}` zoned ${dev}" | \
+	dmsetup create dmz-`basename ${dev}`
diff --git a/Documentation/device-mapper/era.txt b/Documentation/device-mapper/era.rst
similarity index 70%
rename from Documentation/device-mapper/era.txt
rename to Documentation/device-mapper/era.rst
index 3c6d01be3560..90dd5c670b9f 100644
--- a/Documentation/device-mapper/era.txt
+++ b/Documentation/device-mapper/era.rst
@@ -1,3 +1,7 @@
+======
+dm-era
+======
+
 Introduction
 ============
 
@@ -14,12 +18,14 @@ coherency after rolling back a vendor snapshot.
 Constructor
 ===========
 
- era <metadata dev> <origin dev> <block size>
+era <metadata dev> <origin dev> <block size>
 
- metadata dev    : fast device holding the persistent metadata
- origin dev	 : device holding data blocks that may change
- block size      : block size of origin data device, granularity that is
-		     tracked by the target
+ ================ ======================================================
+ metadata dev     fast device holding the persistent metadata
+ origin dev	  device holding data blocks that may change
+ block size       block size of origin data device, granularity that is
+		  tracked by the target
+ ================ ======================================================
 
 Messages
 ========
@@ -49,14 +55,16 @@ Status
 <metadata block size> <#used metadata blocks>/<#total metadata blocks>
 <current era> <held metadata root | '-'>
 
-metadata block size	 : Fixed block size for each metadata block in
-			     sectors
-#used metadata blocks	 : Number of metadata blocks used
-#total metadata blocks	 : Total number of metadata blocks
-current era		 : The current era
-held metadata root	 : The location, in blocks, of the metadata root
-			     that has been 'held' for userspace read
-			     access. '-' indicates there is no held root
+========================= ==============================================
+metadata block size	  Fixed block size for each metadata block in
+			  sectors
+#used metadata blocks	  Number of metadata blocks used
+#total metadata blocks	  Total number of metadata blocks
+current era		  The current era
+held metadata root	  The location, in blocks, of the metadata root
+			  that has been 'held' for userspace read
+			  access. '-' indicates there is no held root
+========================= ==============================================
 
 Detailed use case
 =================
@@ -88,7 +96,7 @@ Memory usage
 
 The target uses a bitset to record writes in the current era.  It also
 has a spare bitset ready for switching over to a new era.  Other than
-that it uses a few 4k blocks for updating metadata.
+that it uses a few 4k blocks for updating metadata::
 
    (4 * nr_blocks) bytes + buffers
 
diff --git a/Documentation/device-mapper/index.rst b/Documentation/device-mapper/index.rst
new file mode 100644
index 000000000000..105e253bc231
--- /dev/null
+++ b/Documentation/device-mapper/index.rst
@@ -0,0 +1,44 @@
+:orphan:
+
+=============
+Device Mapper
+=============
+
+.. toctree::
+    :maxdepth: 1
+
+    cache-policies
+    cache
+    delay
+    dm-crypt
+    dm-flakey
+    dm-init
+    dm-integrity
+    dm-io
+    dm-log
+    dm-queue-length
+    dm-raid
+    dm-service-time
+    dm-uevent
+    dm-zoned
+    era
+    kcopyd
+    linear
+    log-writes
+    persistent-data
+    snapshot
+    statistics
+    striped
+    switch
+    thin-provisioning
+    unstriped
+    verity
+    writecache
+    zero
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/device-mapper/kcopyd.txt b/Documentation/device-mapper/kcopyd.rst
similarity index 93%
rename from Documentation/device-mapper/kcopyd.txt
rename to Documentation/device-mapper/kcopyd.rst
index 820382c4cecf..7651d395127f 100644
--- a/Documentation/device-mapper/kcopyd.txt
+++ b/Documentation/device-mapper/kcopyd.rst
@@ -1,3 +1,4 @@
+======
 kcopyd
 ======
 
@@ -7,7 +8,7 @@ notification. It is used by dm-snapshot and dm-mirror.
 
 Users of kcopyd must first create a client and indicate how many memory pages
 to set aside for their copy jobs. This is done with a call to
-kcopyd_client_create().
+kcopyd_client_create()::
 
    int kcopyd_client_create(unsigned int num_pages,
                             struct kcopyd_client **result);
@@ -16,7 +17,7 @@ To start a copy job, the user must set up io_region structures to describe
 the source and destinations of the copy. Each io_region indicates a
 block-device along with the starting sector and size of the region. The source
 of the copy is given as one io_region structure, and the destinations of the
-copy are given as an array of io_region structures.
+copy are given as an array of io_region structures::
 
    struct io_region {
       struct block_device *bdev;
@@ -26,7 +27,7 @@ copy are given as an array of io_region structures.
 
 To start the copy, the user calls kcopyd_copy(), passing in the client
 pointer, pointers to the source and destination io_regions, the name of a
-completion callback routine, and a pointer to some context data for the copy.
+completion callback routine, and a pointer to some context data for the copy::
 
    int kcopyd_copy(struct kcopyd_client *kc, struct io_region *from,
                    unsigned int num_dests, struct io_region *dests,
@@ -41,7 +42,6 @@ write error occurred during the copy.
 
 When a user is done with all their copy jobs, they should call
 kcopyd_client_destroy() to delete the kcopyd client, which will release the
-associated memory pages.
+associated memory pages::
 
    void kcopyd_client_destroy(struct kcopyd_client *kc);
-
diff --git a/Documentation/device-mapper/linear.rst b/Documentation/device-mapper/linear.rst
new file mode 100644
index 000000000000..9d17fc6e64a9
--- /dev/null
+++ b/Documentation/device-mapper/linear.rst
@@ -0,0 +1,63 @@
+=========
+dm-linear
+=========
+
+Device-Mapper's "linear" target maps a linear range of the Device-Mapper
+device onto a linear range of another device.  This is the basic building
+block of logical volume managers.
+
+Parameters: <dev path> <offset>
+    <dev path>:
+	Full pathname to the underlying block-device, or a
+        "major:minor" device-number.
+    <offset>:
+	Starting sector within the device.
+
+
+Example scripts
+===============
+
+::
+
+  #!/bin/sh
+  # Create an identity mapping for a device
+  echo "0 `blockdev --getsz $1` linear $1 0" | dmsetup create identity
+
+::
+
+  #!/bin/sh
+  # Join 2 devices together
+  size1=`blockdev --getsz $1`
+  size2=`blockdev --getsz $2`
+  echo "0 $size1 linear $1 0
+  $size1 $size2 linear $2 0" | dmsetup create joined
+
+::
+
+  #!/usr/bin/perl -w
+  # Split a device into 4M chunks and then join them together in reverse order.
+
+  my $name = "reverse";
+  my $extent_size = 4 * 1024 * 2;
+  my $dev = $ARGV[0];
+  my $table = "";
+  my $count = 0;
+
+  if (!defined($dev)) {
+          die("Please specify a device.\n");
+  }
+
+  my $dev_size = `blockdev --getsz $dev`;
+  my $extents = int($dev_size / $extent_size) -
+                (($dev_size % $extent_size) ? 1 : 0);
+
+  while ($extents > 0) {
+          my $this_start = $count * $extent_size;
+          $extents--;
+          $count++;
+          my $this_offset = $extents * $extent_size;
+
+          $table .= "$this_start $extent_size linear $dev $this_offset\n";
+  }
+
+  `echo \"$table\" | dmsetup create $name`;
diff --git a/Documentation/device-mapper/linear.txt b/Documentation/device-mapper/linear.txt
deleted file mode 100644
index 7cb98d89d3f8..000000000000
--- a/Documentation/device-mapper/linear.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-dm-linear
-=========
-
-Device-Mapper's "linear" target maps a linear range of the Device-Mapper
-device onto a linear range of another device.  This is the basic building
-block of logical volume managers.
-
-Parameters: <dev path> <offset>
-    <dev path>: Full pathname to the underlying block-device, or a
-                "major:minor" device-number.
-    <offset>: Starting sector within the device.
-
-
-Example scripts
-===============
-[[
-#!/bin/sh
-# Create an identity mapping for a device
-echo "0 `blockdev --getsz $1` linear $1 0" | dmsetup create identity
-]]
-
-
-[[
-#!/bin/sh
-# Join 2 devices together
-size1=`blockdev --getsz $1`
-size2=`blockdev --getsz $2`
-echo "0 $size1 linear $1 0
-$size1 $size2 linear $2 0" | dmsetup create joined
-]]
-
-
-[[
-#!/usr/bin/perl -w
-# Split a device into 4M chunks and then join them together in reverse order.
-
-my $name = "reverse";
-my $extent_size = 4 * 1024 * 2;
-my $dev = $ARGV[0];
-my $table = "";
-my $count = 0;
-
-if (!defined($dev)) {
-        die("Please specify a device.\n");
-}
-
-my $dev_size = `blockdev --getsz $dev`;
-my $extents = int($dev_size / $extent_size) -
-              (($dev_size % $extent_size) ? 1 : 0);
-
-while ($extents > 0) {
-        my $this_start = $count * $extent_size;
-        $extents--;
-        $count++;
-        my $this_offset = $extents * $extent_size;
-
-        $table .= "$this_start $extent_size linear $dev $this_offset\n";
-}
-
-`echo \"$table\" | dmsetup create $name`;
-]]
diff --git a/Documentation/device-mapper/log-writes.txt b/Documentation/device-mapper/log-writes.rst
similarity index 61%
rename from Documentation/device-mapper/log-writes.txt
rename to Documentation/device-mapper/log-writes.rst
index b638d124be6a..23141f2ffb7c 100644
--- a/Documentation/device-mapper/log-writes.txt
+++ b/Documentation/device-mapper/log-writes.rst
@@ -1,3 +1,4 @@
+=============
 dm-log-writes
 =============
 
@@ -25,11 +26,11 @@ completed WRITEs, at the time the REQ_PREFLUSH is issued, are added in order to
 simulate the worst case scenario with regard to power failures.  Consider the
 following example (W means write, C means complete):
 
-W1,W2,W3,C3,C2,Wflush,C1,Cflush
+	W1,W2,W3,C3,C2,Wflush,C1,Cflush
 
-The log would show the following
+The log would show the following:
 
-W3,W2,flush,W1....
+	W3,W2,flush,W1....
 
 Again this is to simulate what is actually on disk, this allows us to detect
 cases where a power failure at a particular point in time would create an
@@ -42,11 +43,11 @@ Any REQ_OP_DISCARD requests are treated like WRITE requests.  Otherwise we would
 have all the DISCARD requests, and then the WRITE requests and then the FLUSH
 request.  Consider the following example:
 
-WRITE block 1, DISCARD block 1, FLUSH
+	WRITE block 1, DISCARD block 1, FLUSH
 
-If we logged DISCARD when it completed, the replay would look like this
+If we logged DISCARD when it completed, the replay would look like this:
 
-DISCARD 1, WRITE 1, FLUSH
+	DISCARD 1, WRITE 1, FLUSH
 
 which isn't quite what happened and wouldn't be caught during the log replay.
 
@@ -57,15 +58,19 @@ i) Constructor
 
    log-writes <dev_path> <log_dev_path>
 
-   dev_path	: Device that all of the IO will go to normally.
-   log_dev_path : Device where the log entries are written to.
+   ============= ==============================================
+   dev_path	 Device that all of the IO will go to normally.
+   log_dev_path  Device where the log entries are written to.
+   ============= ==============================================
 
 ii) Status
 
     <#logged entries> <highest allocated sector>
 
-    #logged entries	       : Number of logged entries
-    highest allocated sector   : Highest allocated sector
+    =========================== ========================
+    #logged entries	        Number of logged entries
+    highest allocated sector    Highest allocated sector
+    =========================== ========================
 
 iii) Messages
 
@@ -75,15 +80,15 @@ iii) Messages
 	For example say you want to fsck a file system after every
 	write, but first you need to replay up to the mkfs to make sure
 	we're fsck'ing something reasonable, you would do something like
-	this:
+	this::
 
 	  mkfs.btrfs -f /dev/mapper/log
 	  dmsetup message log 0 mark mkfs
 	  <run test>
 
-	  This would allow you to replay the log up to the mkfs mark and
-	  then replay from that point on doing the fsck check in the
-	  interval that you want.
+	This would allow you to replay the log up to the mkfs mark and
+	then replay from that point on doing the fsck check in the
+	interval that you want.
 
 	Every log has a mark at the end labeled "dm-log-writes-end".
 
@@ -97,42 +102,42 @@ Example usage
 =============
 
 Say you want to test fsync on your file system.  You would do something like
-this:
+this::
 
-TABLE="0 $(blockdev --getsz /dev/sdb) log-writes /dev/sdb /dev/sdc"
-dmsetup create log --table "$TABLE"
-mkfs.btrfs -f /dev/mapper/log
-dmsetup message log 0 mark mkfs
+  TABLE="0 $(blockdev --getsz /dev/sdb) log-writes /dev/sdb /dev/sdc"
+  dmsetup create log --table "$TABLE"
+  mkfs.btrfs -f /dev/mapper/log
+  dmsetup message log 0 mark mkfs
 
-mount /dev/mapper/log /mnt/btrfs-test
-<some test that does fsync at the end>
-dmsetup message log 0 mark fsync
-md5sum /mnt/btrfs-test/foo
-umount /mnt/btrfs-test
+  mount /dev/mapper/log /mnt/btrfs-test
+  <some test that does fsync at the end>
+  dmsetup message log 0 mark fsync
+  md5sum /mnt/btrfs-test/foo
+  umount /mnt/btrfs-test
 
-dmsetup remove log
-replay-log --log /dev/sdc --replay /dev/sdb --end-mark fsync
-mount /dev/sdb /mnt/btrfs-test
-md5sum /mnt/btrfs-test/foo
-<verify md5sum's are correct>
+  dmsetup remove log
+  replay-log --log /dev/sdc --replay /dev/sdb --end-mark fsync
+  mount /dev/sdb /mnt/btrfs-test
+  md5sum /mnt/btrfs-test/foo
+  <verify md5sum's are correct>
 
-Another option is to do a complicated file system operation and verify the file
-system is consistent during the entire operation.  You could do this with:
+  Another option is to do a complicated file system operation and verify the file
+  system is consistent during the entire operation.  You could do this with:
 
-TABLE="0 $(blockdev --getsz /dev/sdb) log-writes /dev/sdb /dev/sdc"
-dmsetup create log --table "$TABLE"
-mkfs.btrfs -f /dev/mapper/log
-dmsetup message log 0 mark mkfs
+  TABLE="0 $(blockdev --getsz /dev/sdb) log-writes /dev/sdb /dev/sdc"
+  dmsetup create log --table "$TABLE"
+  mkfs.btrfs -f /dev/mapper/log
+  dmsetup message log 0 mark mkfs
 
-mount /dev/mapper/log /mnt/btrfs-test
-<fsstress to dirty the fs>
-btrfs filesystem balance /mnt/btrfs-test
-umount /mnt/btrfs-test
-dmsetup remove log
+  mount /dev/mapper/log /mnt/btrfs-test
+  <fsstress to dirty the fs>
+  btrfs filesystem balance /mnt/btrfs-test
+  umount /mnt/btrfs-test
+  dmsetup remove log
 
-replay-log --log /dev/sdc --replay /dev/sdb --end-mark mkfs
-btrfsck /dev/sdb
-replay-log --log /dev/sdc --replay /dev/sdb --start-mark mkfs \
+  replay-log --log /dev/sdc --replay /dev/sdb --end-mark mkfs
+  btrfsck /dev/sdb
+  replay-log --log /dev/sdc --replay /dev/sdb --start-mark mkfs \
 	--fsck "btrfsck /dev/sdb" --check fua
 
 And that will replay the log until it sees a FUA request, run the fsck command
diff --git a/Documentation/device-mapper/persistent-data.txt b/Documentation/device-mapper/persistent-data.rst
similarity index 98%
rename from Documentation/device-mapper/persistent-data.txt
rename to Documentation/device-mapper/persistent-data.rst
index a333bcb3a6c2..2065c3c5a091 100644
--- a/Documentation/device-mapper/persistent-data.txt
+++ b/Documentation/device-mapper/persistent-data.rst
@@ -1,3 +1,7 @@
+===============
+Persistent data
+===============
+
 Introduction
 ============
 
diff --git a/Documentation/device-mapper/snapshot.txt b/Documentation/device-mapper/snapshot.rst
similarity index 62%
rename from Documentation/device-mapper/snapshot.txt
rename to Documentation/device-mapper/snapshot.rst
index b8bbb516f989..4c53304e72f1 100644
--- a/Documentation/device-mapper/snapshot.txt
+++ b/Documentation/device-mapper/snapshot.rst
@@ -1,15 +1,16 @@
+==============================
 Device-mapper snapshot support
 ==============================
 
 Device-mapper allows you, without massive data copying:
 
-*) To create snapshots of any block device i.e. mountable, saved states of
-the block device which are also writable without interfering with the
-original content;
-*) To create device "forks", i.e. multiple different versions of the
-same data stream.
-*) To merge a snapshot of a block device back into the snapshot's origin
-device.
+-  To create snapshots of any block device i.e. mountable, saved states of
+   the block device which are also writable without interfering with the
+   original content;
+-  To create device "forks", i.e. multiple different versions of the
+   same data stream.
+-  To merge a snapshot of a block device back into the snapshot's origin
+   device.
 
 In the first two cases, dm copies only the chunks of data that get
 changed and uses a separate copy-on-write (COW) block device for
@@ -22,7 +23,7 @@ the origin device.
 There are three dm targets available:
 snapshot, snapshot-origin, and snapshot-merge.
 
-*) snapshot-origin <origin>
+-  snapshot-origin <origin>
 
 which will normally have one or more snapshots based on it.
 Reads will be mapped directly to the backing device. For each write, the
@@ -30,7 +31,7 @@ original data will be saved in the <COW device> of each snapshot to keep
 its visible content unchanged, at least until the <COW device> fills up.
 
 
-*) snapshot <origin> <COW device> <persistent?> <chunksize>
+-  snapshot <origin> <COW device> <persistent?> <chunksize>
 
 A snapshot of the <origin> block device is created. Changed chunks of
 <chunksize> sectors will be stored on the <COW device>.  Writes will
@@ -83,25 +84,25 @@ When you create the first LVM2 snapshot of a volume, four dm devices are used:
    source volume), whose table is replaced by a "snapshot-origin" mapping
    from device #1.
 
-A fixed naming scheme is used, so with the following commands:
+A fixed naming scheme is used, so with the following commands::
 
-lvcreate -L 1G -n base volumeGroup
-lvcreate -L 100M --snapshot -n snap volumeGroup/base
+  lvcreate -L 1G -n base volumeGroup
+  lvcreate -L 100M --snapshot -n snap volumeGroup/base
 
-we'll have this situation (with volumes in above order):
+we'll have this situation (with volumes in above order)::
 
-# dmsetup table|grep volumeGroup
+  # dmsetup table|grep volumeGroup
 
-volumeGroup-base-real: 0 2097152 linear 8:19 384
-volumeGroup-snap-cow: 0 204800 linear 8:19 2097536
-volumeGroup-snap: 0 2097152 snapshot 254:11 254:12 P 16
-volumeGroup-base: 0 2097152 snapshot-origin 254:11
+  volumeGroup-base-real: 0 2097152 linear 8:19 384
+  volumeGroup-snap-cow: 0 204800 linear 8:19 2097536
+  volumeGroup-snap: 0 2097152 snapshot 254:11 254:12 P 16
+  volumeGroup-base: 0 2097152 snapshot-origin 254:11
 
-# ls -lL /dev/mapper/volumeGroup-*
-brw-------  1 root root 254, 11 29 ago 18:15 /dev/mapper/volumeGroup-base-real
-brw-------  1 root root 254, 12 29 ago 18:15 /dev/mapper/volumeGroup-snap-cow
-brw-------  1 root root 254, 13 29 ago 18:15 /dev/mapper/volumeGroup-snap
-brw-------  1 root root 254, 10 29 ago 18:14 /dev/mapper/volumeGroup-base
+  # ls -lL /dev/mapper/volumeGroup-*
+  brw-------  1 root root 254, 11 29 ago 18:15 /dev/mapper/volumeGroup-base-real
+  brw-------  1 root root 254, 12 29 ago 18:15 /dev/mapper/volumeGroup-snap-cow
+  brw-------  1 root root 254, 13 29 ago 18:15 /dev/mapper/volumeGroup-snap
+  brw-------  1 root root 254, 10 29 ago 18:14 /dev/mapper/volumeGroup-base
 
 
 How snapshot-merge is used by LVM2
@@ -114,27 +115,28 @@ merging snapshot after it completes.  The "snapshot" that hands over its
 COW device to the "snapshot-merge" is deactivated (unless using lvchange
 --refresh); but if it is left active it will simply return I/O errors.
 
-A snapshot will merge into its origin with the following command:
+A snapshot will merge into its origin with the following command::
 
-lvconvert --merge volumeGroup/snap
+  lvconvert --merge volumeGroup/snap
 
-we'll now have this situation:
+we'll now have this situation::
 
-# dmsetup table|grep volumeGroup
+  # dmsetup table|grep volumeGroup
 
-volumeGroup-base-real: 0 2097152 linear 8:19 384
-volumeGroup-base-cow: 0 204800 linear 8:19 2097536
-volumeGroup-base: 0 2097152 snapshot-merge 254:11 254:12 P 16
+  volumeGroup-base-real: 0 2097152 linear 8:19 384
+  volumeGroup-base-cow: 0 204800 linear 8:19 2097536
+  volumeGroup-base: 0 2097152 snapshot-merge 254:11 254:12 P 16
 
-# ls -lL /dev/mapper/volumeGroup-*
-brw-------  1 root root 254, 11 29 ago 18:15 /dev/mapper/volumeGroup-base-real
-brw-------  1 root root 254, 12 29 ago 18:16 /dev/mapper/volumeGroup-base-cow
-brw-------  1 root root 254, 10 29 ago 18:16 /dev/mapper/volumeGroup-base
+  # ls -lL /dev/mapper/volumeGroup-*
+  brw-------  1 root root 254, 11 29 ago 18:15 /dev/mapper/volumeGroup-base-real
+  brw-------  1 root root 254, 12 29 ago 18:16 /dev/mapper/volumeGroup-base-cow
+  brw-------  1 root root 254, 10 29 ago 18:16 /dev/mapper/volumeGroup-base
 
 
 How to determine when a merging is complete
 ===========================================
 The snapshot-merge and snapshot status lines end with:
+
   <sectors_allocated>/<total_sectors> <metadata_sectors>
 
 Both <sectors_allocated> and <total_sectors> include both data and metadata.
@@ -142,35 +144,37 @@ During merging, the number of sectors allocated gets smaller and
 smaller.  Merging has finished when the number of sectors holding data
 is zero, in other words <sectors_allocated> == <metadata_sectors>.
 
-Here is a practical example (using a hybrid of lvm and dmsetup commands):
+Here is a practical example (using a hybrid of lvm and dmsetup commands)::
 
-# lvs
-  LV      VG          Attr   LSize Origin  Snap%  Move Log Copy%  Convert
-  base    volumeGroup owi-a- 4.00g
-  snap    volumeGroup swi-a- 1.00g base  18.97
+  # lvs
+    LV      VG          Attr   LSize Origin  Snap%  Move Log Copy%  Convert
+    base    volumeGroup owi-a- 4.00g
+    snap    volumeGroup swi-a- 1.00g base  18.97
 
-# dmsetup status volumeGroup-snap
-0 8388608 snapshot 397896/2097152 1560
-                                  ^^^^ metadata sectors
+  # dmsetup status volumeGroup-snap
+  0 8388608 snapshot 397896/2097152 1560
+                                    ^^^^ metadata sectors
 
-# lvconvert --merge -b volumeGroup/snap
-  Merging of volume snap started.
+  # lvconvert --merge -b volumeGroup/snap
+    Merging of volume snap started.
 
-# lvs volumeGroup/snap
-  LV      VG          Attr   LSize Origin  Snap%  Move Log Copy%  Convert
-  base    volumeGroup Owi-a- 4.00g          17.23
+  # lvs volumeGroup/snap
+    LV      VG          Attr   LSize Origin  Snap%  Move Log Copy%  Convert
+    base    volumeGroup Owi-a- 4.00g          17.23
 
-# dmsetup status volumeGroup-base
-0 8388608 snapshot-merge 281688/2097152 1104
+  # dmsetup status volumeGroup-base
+  0 8388608 snapshot-merge 281688/2097152 1104
 
-# dmsetup status volumeGroup-base
-0 8388608 snapshot-merge 180480/2097152 712
+  # dmsetup status volumeGroup-base
+  0 8388608 snapshot-merge 180480/2097152 712
 
-# dmsetup status volumeGroup-base
-0 8388608 snapshot-merge 16/2097152 16
+  # dmsetup status volumeGroup-base
+  0 8388608 snapshot-merge 16/2097152 16
 
 Merging has finished.
 
-# lvs
-  LV      VG          Attr   LSize Origin  Snap%  Move Log Copy%  Convert
-  base    volumeGroup owi-a- 4.00g
+::
+
+  # lvs
+    LV      VG          Attr   LSize Origin  Snap%  Move Log Copy%  Convert
+    base    volumeGroup owi-a- 4.00g
diff --git a/Documentation/device-mapper/statistics.txt b/Documentation/device-mapper/statistics.rst
similarity index 87%
rename from Documentation/device-mapper/statistics.txt
rename to Documentation/device-mapper/statistics.rst
index 170ac02a1f50..3d80a9f850cc 100644
--- a/Documentation/device-mapper/statistics.txt
+++ b/Documentation/device-mapper/statistics.rst
@@ -1,3 +1,4 @@
+=============
 DM statistics
 =============
 
@@ -11,7 +12,7 @@ Individual statistics will be collected for each step-sized area within
 the range specified.
 
 The I/O statistics counters for each step-sized area of a region are
-in the same format as /sys/block/*/stat or /proc/diskstats (see:
+in the same format as `/sys/block/*/stat` or `/proc/diskstats` (see:
 Documentation/iostats.txt).  But two extra counters (12 and 13) are
 provided: total time spent reading and writing.  When the histogram
 argument is used, the 14th parameter is reported that represents the
@@ -32,40 +33,45 @@ on each other's data.
 The creation of DM statistics will allocate memory via kmalloc or
 fallback to using vmalloc space.  At most, 1/4 of the overall system
 memory may be allocated by DM statistics.  The admin can see how much
-memory is used by reading
-/sys/module/dm_mod/parameters/stats_current_allocated_bytes
+memory is used by reading:
+
+	/sys/module/dm_mod/parameters/stats_current_allocated_bytes
 
 Messages
 ========
 
-    @stats_create <range> <step>
-		[<number_of_optional_arguments> <optional_arguments>...]
-		[<program_id> [<aux_data>]]
-
+    @stats_create <range> <step> [<number_of_optional_arguments> <optional_arguments>...] [<program_id> [<aux_data>]]
 	Create a new region and return the region_id.
 
 	<range>
-	  "-" - whole device
-	  "<start_sector>+<length>" - a range of <length> 512-byte sectors
-				      starting with <start_sector>.
+	  "-"
+		whole device
+	  "<start_sector>+<length>"
+		a range of <length> 512-byte sectors
+		starting with <start_sector>.
 
 	<step>
-	  "<area_size>" - the range is subdivided into areas each containing
-			  <area_size> sectors.
-	  "/<number_of_areas>" - the range is subdivided into the specified
-				 number of areas.
+	  "<area_size>"
+		the range is subdivided into areas each containing
+		<area_size> sectors.
+	  "/<number_of_areas>"
+		the range is subdivided into the specified
+		number of areas.
 
 	<number_of_optional_arguments>
 	  The number of optional arguments
 
 	<optional_arguments>
-	  The following optional arguments are supported
-	  precise_timestamps - use precise timer with nanosecond resolution
+	  The following optional arguments are supported:
+
+	  precise_timestamps
+		use precise timer with nanosecond resolution
 		instead of the "jiffies" variable.  When this argument is
 		used, the resulting times are in nanoseconds instead of
 		milliseconds.  Precise timestamps are a little bit slower
 		to obtain than jiffies-based timestamps.
-	  histogram:n1,n2,n3,n4,... - collect histogram of latencies.  The
+	  histogram:n1,n2,n3,n4,...
+		collect histogram of latencies.  The
 		numbers n1, n2, etc are times that represent the boundaries
 		of the histogram.  If precise_timestamps is not used, the
 		times are in milliseconds, otherwise they are in
@@ -96,21 +102,18 @@ Messages
 	  @stats_list message, but it doesn't use this value for anything.
 
     @stats_delete <region_id>
-
 	Delete the region with the specified id.
 
 	<region_id>
 	  region_id returned from @stats_create
 
     @stats_clear <region_id>
-
 	Clear all the counters except the in-flight i/o counters.
 
 	<region_id>
 	  region_id returned from @stats_create
 
     @stats_list [<program_id>]
-
 	List all regions registered with @stats_create.
 
 	<program_id>
@@ -127,7 +130,6 @@ Messages
 	if they were specified when creating the region.
 
     @stats_print <region_id> [<starting_line> <number_of_lines>]
-
 	Print counters for each step-sized area of a region.
 
 	<region_id>
@@ -143,10 +145,11 @@ Messages
 
 	Output format for each step-sized area of a region:
 
-	  <start_sector>+<length> counters
+	  <start_sector>+<length>
+		counters
 
 	  The first 11 counters have the same meaning as
-	  /sys/block/*/stat or /proc/diskstats.
+	  `/sys/block/*/stat or /proc/diskstats`.
 
 	  Please refer to Documentation/iostats.txt for details.
 
@@ -163,11 +166,11 @@ Messages
 	  11. the weighted number of milliseconds spent doing I/Os
 
 	  Additional counters:
+
 	  12. the total time spent reading in milliseconds
 	  13. the total time spent writing in milliseconds
 
     @stats_print_clear <region_id> [<starting_line> <number_of_lines>]
-
 	Atomically print and then clear all the counters except the
 	in-flight i/o counters.	 Useful when the client consuming the
 	statistics does not want to lose any statistics (those updated
@@ -185,7 +188,6 @@ Messages
 	  If omitted, all lines are printed and then cleared.
 
     @stats_set_aux <region_id> <aux_data>
-
 	Store auxiliary data aux_data for the specified region.
 
 	<region_id>
@@ -201,23 +203,23 @@ Examples
 ========
 
 Subdivide the DM device 'vol' into 100 pieces and start collecting
-statistics on them:
+statistics on them::
 
   dmsetup message vol 0 @stats_create - /100
 
 Set the auxiliary data string to "foo bar baz" (the escape for each
-space must also be escaped, otherwise the shell will consume them):
+space must also be escaped, otherwise the shell will consume them)::
 
   dmsetup message vol 0 @stats_set_aux 0 foo\\ bar\\ baz
 
-List the statistics:
+List the statistics::
 
   dmsetup message vol 0 @stats_list
 
-Print the statistics:
+Print the statistics::
 
   dmsetup message vol 0 @stats_print 0
 
-Delete the statistics:
+Delete the statistics::
 
   dmsetup message vol 0 @stats_delete 0
diff --git a/Documentation/device-mapper/striped.rst b/Documentation/device-mapper/striped.rst
new file mode 100644
index 000000000000..e9a8da192ae1
--- /dev/null
+++ b/Documentation/device-mapper/striped.rst
@@ -0,0 +1,61 @@
+=========
+dm-stripe
+=========
+
+Device-Mapper's "striped" target is used to create a striped (i.e. RAID-0)
+device across one or more underlying devices. Data is written in "chunks",
+with consecutive chunks rotating among the underlying devices. This can
+potentially provide improved I/O throughput by utilizing several physical
+devices in parallel.
+
+Parameters: <num devs> <chunk size> [<dev path> <offset>]+
+    <num devs>:
+	Number of underlying devices.
+    <chunk size>:
+	Size of each chunk of data. Must be at least as
+        large as the system's PAGE_SIZE.
+    <dev path>:
+	Full pathname to the underlying block-device, or a
+	"major:minor" device-number.
+    <offset>:
+	Starting sector within the device.
+
+One or more underlying devices can be specified. The striped device size must
+be a multiple of the chunk size multiplied by the number of underlying devices.
+
+
+Example scripts
+===============
+
+::
+
+  #!/usr/bin/perl -w
+  # Create a striped device across any number of underlying devices. The device
+  # will be called "stripe_dev" and have a chunk-size of 128k.
+
+  my $chunk_size = 128 * 2;
+  my $dev_name = "stripe_dev";
+  my $num_devs = @ARGV;
+  my @devs = @ARGV;
+  my ($min_dev_size, $stripe_dev_size, $i);
+
+  if (!$num_devs) {
+          die("Specify at least one device\n");
+  }
+
+  $min_dev_size = `blockdev --getsz $devs[0]`;
+  for ($i = 1; $i < $num_devs; $i++) {
+          my $this_size = `blockdev --getsz $devs[$i]`;
+          $min_dev_size = ($min_dev_size < $this_size) ?
+                          $min_dev_size : $this_size;
+  }
+
+  $stripe_dev_size = $min_dev_size * $num_devs;
+  $stripe_dev_size -= $stripe_dev_size % ($chunk_size * $num_devs);
+
+  $table = "0 $stripe_dev_size striped $num_devs $chunk_size";
+  for ($i = 0; $i < $num_devs; $i++) {
+          $table .= " $devs[$i] 0";
+  }
+
+  `echo $table | dmsetup create $dev_name`;
diff --git a/Documentation/device-mapper/striped.txt b/Documentation/device-mapper/striped.txt
deleted file mode 100644
index 07ec492cceee..000000000000
--- a/Documentation/device-mapper/striped.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-dm-stripe
-=========
-
-Device-Mapper's "striped" target is used to create a striped (i.e. RAID-0)
-device across one or more underlying devices. Data is written in "chunks",
-with consecutive chunks rotating among the underlying devices. This can
-potentially provide improved I/O throughput by utilizing several physical
-devices in parallel.
-
-Parameters: <num devs> <chunk size> [<dev path> <offset>]+
-    <num devs>: Number of underlying devices.
-    <chunk size>: Size of each chunk of data. Must be at least as
-                  large as the system's PAGE_SIZE.
-    <dev path>: Full pathname to the underlying block-device, or a
-                "major:minor" device-number.
-    <offset>: Starting sector within the device.
-
-One or more underlying devices can be specified. The striped device size must
-be a multiple of the chunk size multiplied by the number of underlying devices.
-
-
-Example scripts
-===============
-
-[[
-#!/usr/bin/perl -w
-# Create a striped device across any number of underlying devices. The device
-# will be called "stripe_dev" and have a chunk-size of 128k.
-
-my $chunk_size = 128 * 2;
-my $dev_name = "stripe_dev";
-my $num_devs = @ARGV;
-my @devs = @ARGV;
-my ($min_dev_size, $stripe_dev_size, $i);
-
-if (!$num_devs) {
-        die("Specify at least one device\n");
-}
-
-$min_dev_size = `blockdev --getsz $devs[0]`;
-for ($i = 1; $i < $num_devs; $i++) {
-        my $this_size = `blockdev --getsz $devs[$i]`;
-        $min_dev_size = ($min_dev_size < $this_size) ?
-                        $min_dev_size : $this_size;
-}
-
-$stripe_dev_size = $min_dev_size * $num_devs;
-$stripe_dev_size -= $stripe_dev_size % ($chunk_size * $num_devs);
-
-$table = "0 $stripe_dev_size striped $num_devs $chunk_size";
-for ($i = 0; $i < $num_devs; $i++) {
-        $table .= " $devs[$i] 0";
-}
-
-`echo $table | dmsetup create $dev_name`;
-]]
-
diff --git a/Documentation/device-mapper/switch.txt b/Documentation/device-mapper/switch.rst
similarity index 84%
rename from Documentation/device-mapper/switch.txt
rename to Documentation/device-mapper/switch.rst
index 5bd4831db4a8..7dde06be1a4f 100644
--- a/Documentation/device-mapper/switch.txt
+++ b/Documentation/device-mapper/switch.rst
@@ -1,3 +1,4 @@
+=========
 dm-switch
 =========
 
@@ -67,27 +68,25 @@ b-tree can achieve.
 Construction Parameters
 =======================
 
-    <num_paths> <region_size> <num_optional_args> [<optional_args>...]
-    [<dev_path> <offset>]+
+    <num_paths> <region_size> <num_optional_args> [<optional_args>...] [<dev_path> <offset>]+
+	<num_paths>
+	    The number of paths across which to distribute the I/O.
 
-<num_paths>
-    The number of paths across which to distribute the I/O.
+	<region_size>
+	    The number of 512-byte sectors in a region. Each region can be redirected
+	    to any of the available paths.
 
-<region_size>
-    The number of 512-byte sectors in a region. Each region can be redirected
-    to any of the available paths.
+	<num_optional_args>
+	    The number of optional arguments. Currently, no optional arguments
+	    are supported and so this must be zero.
 
-<num_optional_args>
-    The number of optional arguments. Currently, no optional arguments
-    are supported and so this must be zero.
+	<dev_path>
+	    The block device that represents a specific path to the device.
 
-<dev_path>
-    The block device that represents a specific path to the device.
-
-<offset>
-    The offset of the start of data on the specific <dev_path> (in units
-    of 512-byte sectors). This number is added to the sector number when
-    forwarding the request to the specific path. Typically it is zero.
+	<offset>
+	    The offset of the start of data on the specific <dev_path> (in units
+	    of 512-byte sectors). This number is added to the sector number when
+	    forwarding the request to the specific path. Typically it is zero.
 
 Messages
 ========
@@ -122,17 +121,21 @@ Example
 Assume that you have volumes vg1/switch0 vg1/switch1 vg1/switch2 with
 the same size.
 
-Create a switch device with 64kB region size:
+Create a switch device with 64kB region size::
+
     dmsetup create switch --table "0 `blockdev --getsz /dev/vg1/switch0`
 	switch 3 128 0 /dev/vg1/switch0 0 /dev/vg1/switch1 0 /dev/vg1/switch2 0"
 
 Set mappings for the first 7 entries to point to devices switch0, switch1,
-switch2, switch0, switch1, switch2, switch1:
+switch2, switch0, switch1, switch2, switch1::
+
     dmsetup message switch 0 set_region_mappings 0:0 :1 :2 :0 :1 :2 :1
 
-Set repetitive mapping. This command:
+Set repetitive mapping. This command::
+
     dmsetup message switch 0 set_region_mappings 1000:1 :2 R2,10
-is equivalent to:
+
+is equivalent to::
+
     dmsetup message switch 0 set_region_mappings 1000:1 :2 :1 :2 :1 :2 :1 :2 \
 	:1 :2 :1 :2 :1 :2 :1 :2 :1 :2
-
diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.rst
similarity index 92%
rename from Documentation/device-mapper/thin-provisioning.txt
rename to Documentation/device-mapper/thin-provisioning.rst
index 883e7ca5f745..bafebf79da4b 100644
--- a/Documentation/device-mapper/thin-provisioning.txt
+++ b/Documentation/device-mapper/thin-provisioning.rst
@@ -1,3 +1,7 @@
+=================
+Thin provisioning
+=================
+
 Introduction
 ============
 
@@ -95,6 +99,8 @@ previously.)
 Using an existing pool device
 -----------------------------
 
+::
+
     dmsetup create pool \
 	--table "0 20971520 thin-pool $metadata_dev $data_dev \
 		 $data_block_size $low_water_mark"
@@ -154,7 +160,7 @@ Thin provisioning
 i) Creating a new thinly-provisioned volume.
 
   To create a new thinly- provisioned volume you must send a message to an
-  active pool device, /dev/mapper/pool in this example.
+  active pool device, /dev/mapper/pool in this example::
 
     dmsetup message /dev/mapper/pool 0 "create_thin 0"
 
@@ -164,7 +170,7 @@ i) Creating a new thinly-provisioned volume.
 
 ii) Using a thinly-provisioned volume.
 
-  Thinly-provisioned volumes are activated using the 'thin' target:
+  Thinly-provisioned volumes are activated using the 'thin' target::
 
     dmsetup create thin --table "0 2097152 thin /dev/mapper/pool 0"
 
@@ -181,6 +187,8 @@ i) Creating an internal snapshot.
   must suspend it before creating the snapshot to avoid corruption.
   This is NOT enforced at the moment, so please be careful!
 
+  ::
+
     dmsetup suspend /dev/mapper/thin
     dmsetup message /dev/mapper/pool 0 "create_snap 1 0"
     dmsetup resume /dev/mapper/thin
@@ -198,14 +206,14 @@ ii) Using an internal snapshot.
   activating or removing them both.  (This differs from conventional
   device-mapper snapshots.)
 
-  Activate it exactly the same way as any other thinly-provisioned volume:
+  Activate it exactly the same way as any other thinly-provisioned volume::
 
     dmsetup create snap --table "0 2097152 thin /dev/mapper/pool 1"
 
 External snapshots
 ------------------
 
-You can use an external _read only_ device as an origin for a
+You can use an external **read only** device as an origin for a
 thinly-provisioned volume.  Any read to an unprovisioned area of the
 thin device will be passed through to the origin.  Writes trigger
 the allocation of new blocks as usual.
@@ -223,11 +231,13 @@ i) Creating a snapshot of an external device
   This is the same as creating a thin device.
   You don't mention the origin at this stage.
 
+  ::
+
     dmsetup message /dev/mapper/pool 0 "create_thin 0"
 
 ii) Using a snapshot of an external device.
 
-  Append an extra parameter to the thin target specifying the origin:
+  Append an extra parameter to the thin target specifying the origin::
 
     dmsetup create snap --table "0 2097152 thin /dev/mapper/pool 0 /dev/image"
 
@@ -240,6 +250,8 @@ Deactivation
 All devices using a pool must be deactivated before the pool itself
 can be.
 
+::
+
     dmsetup remove thin
     dmsetup remove snap
     dmsetup remove pool
@@ -252,25 +264,32 @@ Reference
 
 i) Constructor
 
-    thin-pool <metadata dev> <data dev> <data block size (sectors)> \
-	      <low water mark (blocks)> [<number of feature args> [<arg>]*]
+    ::
+
+      thin-pool <metadata dev> <data dev> <data block size (sectors)> \
+	        <low water mark (blocks)> [<number of feature args> [<arg>]*]
 
     Optional feature arguments:
 
-      skip_block_zeroing: Skip the zeroing of newly-provisioned blocks.
+      skip_block_zeroing:
+	Skip the zeroing of newly-provisioned blocks.
 
-      ignore_discard: Disable discard support.
+      ignore_discard:
+	Disable discard support.
 
-      no_discard_passdown: Don't pass discards down to the underlying
-			   data device, but just remove the mapping.
+      no_discard_passdown:
+	Don't pass discards down to the underlying
+	data device, but just remove the mapping.
 
-      read_only: Don't allow any changes to be made to the pool
+      read_only:
+		 Don't allow any changes to be made to the pool
 		 metadata.  This mode is only available after the
 		 thin-pool has been created and first used in full
 		 read/write mode.  It cannot be specified on initial
 		 thin-pool creation.
 
-      error_if_no_space: Error IOs, instead of queueing, if no space.
+      error_if_no_space:
+	Error IOs, instead of queueing, if no space.
 
     Data block size must be between 64KB (128 sectors) and 1GB
     (2097152 sectors) inclusive.
@@ -278,10 +297,12 @@ i) Constructor
 
 ii) Status
 
-    <transaction id> <used metadata blocks>/<total metadata blocks>
-    <used data blocks>/<total data blocks> <held metadata root>
-    ro|rw|out_of_data_space [no_]discard_passdown [error|queue]_if_no_space
-    needs_check|- metadata_low_watermark
+    ::
+
+      <transaction id> <used metadata blocks>/<total metadata blocks>
+      <used data blocks>/<total data blocks> <held metadata root>
+      ro|rw|out_of_data_space [no_]discard_passdown [error|queue]_if_no_space
+      needs_check|- metadata_low_watermark
 
     transaction id:
 	A 64-bit number used by userspace to help synchronise with metadata
@@ -336,13 +357,11 @@ ii) Status
 iii) Messages
 
     create_thin <dev id>
-
 	Create a new thinly-provisioned device.
 	<dev id> is an arbitrary unique 24-bit identifier chosen by
 	the caller.
 
     create_snap <dev id> <origin id>
-
 	Create a new snapshot of another thinly-provisioned device.
 	<dev id> is an arbitrary unique 24-bit identifier chosen by
 	the caller.
@@ -350,11 +369,9 @@ iii) Messages
 	of which the new device will be a snapshot.
 
     delete <dev id>
-
 	Deletes a thin device.  Irreversible.
 
     set_transaction_id <current id> <new id>
-
 	Userland volume managers, such as LVM, need a way to
 	synchronise their external metadata with the internal metadata of the
 	pool target.  The thin-pool target offers to store an
@@ -364,14 +381,12 @@ iii) Messages
 	compare-and-swap message.
 
     reserve_metadata_snap
-
         Reserve a copy of the data mapping btree for use by userland.
         This allows userland to inspect the mappings as they were when
         this message was executed.  Use the pool's status command to
         get the root block associated with the metadata snapshot.
 
     release_metadata_snap
-
         Release a previously reserved copy of the data mapping btree.
 
 'thin' target
@@ -379,7 +394,9 @@ iii) Messages
 
 i) Constructor
 
-    thin <pool dev> <dev id> [<external origin dev>]
+    ::
+
+        thin <pool dev> <dev id> [<external origin dev>]
 
     pool dev:
 	the thin-pool device, e.g. /dev/mapper/my_pool or 253:0
@@ -401,8 +418,7 @@ provisioned as and when needed.
 
 ii) Status
 
-     <nr mapped sectors> <highest mapped sector>
-
+    <nr mapped sectors> <highest mapped sector>
 	If the pool has encountered device errors and failed, the status
 	will just contain the string 'Fail'.  The userspace recovery
 	tools should then be used.
diff --git a/Documentation/device-mapper/unstriped.txt b/Documentation/device-mapper/unstriped.rst
similarity index 60%
rename from Documentation/device-mapper/unstriped.txt
rename to Documentation/device-mapper/unstriped.rst
index 0b2a306c54ee..0a8d3eb3f072 100644
--- a/Documentation/device-mapper/unstriped.txt
+++ b/Documentation/device-mapper/unstriped.rst
@@ -1,3 +1,7 @@
+================================
+Device-mapper "unstriped" target
+================================
+
 Introduction
 ============
 
@@ -34,46 +38,46 @@ striped target to combine the 4 devices into one.  It then will use
 the unstriped target ontop of the striped device to access the
 individual backing loop devices.  We write data to the newly exposed
 unstriped devices and verify the data written matches the correct
-underlying device on the striped array.
-
-#!/bin/bash
-
-MEMBER_SIZE=$((128 * 1024 * 1024))
-NUM=4
-SEQ_END=$((${NUM}-1))
-CHUNK=256
-BS=4096
-
-RAID_SIZE=$((${MEMBER_SIZE}*${NUM}/512))
-DM_PARMS="0 ${RAID_SIZE} striped ${NUM} ${CHUNK}"
-COUNT=$((${MEMBER_SIZE} / ${BS}))
-
-for i in $(seq 0 ${SEQ_END}); do
-  dd if=/dev/zero of=member-${i} bs=${MEMBER_SIZE} count=1 oflag=direct
-  losetup /dev/loop${i} member-${i}
-  DM_PARMS+=" /dev/loop${i} 0"
-done
-
-echo $DM_PARMS | dmsetup create raid0
-for i in $(seq 0 ${SEQ_END}); do
-  echo "0 1 unstriped ${NUM} ${CHUNK} ${i} /dev/mapper/raid0 0" | dmsetup create set-${i}
-done;
-
-for i in $(seq 0 ${SEQ_END}); do
-  dd if=/dev/urandom of=/dev/mapper/set-${i} bs=${BS} count=${COUNT} oflag=direct
-  diff /dev/mapper/set-${i} member-${i}
-done;
-
-for i in $(seq 0 ${SEQ_END}); do
-  dmsetup remove set-${i}
-done
-
-dmsetup remove raid0
-
-for i in $(seq 0 ${SEQ_END}); do
-  losetup -d /dev/loop${i}
-  rm -f member-${i}
-done
+underlying device on the striped array::
+
+  #!/bin/bash
+
+  MEMBER_SIZE=$((128 * 1024 * 1024))
+  NUM=4
+  SEQ_END=$((${NUM}-1))
+  CHUNK=256
+  BS=4096
+
+  RAID_SIZE=$((${MEMBER_SIZE}*${NUM}/512))
+  DM_PARMS="0 ${RAID_SIZE} striped ${NUM} ${CHUNK}"
+  COUNT=$((${MEMBER_SIZE} / ${BS}))
+
+  for i in $(seq 0 ${SEQ_END}); do
+    dd if=/dev/zero of=member-${i} bs=${MEMBER_SIZE} count=1 oflag=direct
+    losetup /dev/loop${i} member-${i}
+    DM_PARMS+=" /dev/loop${i} 0"
+  done
+
+  echo $DM_PARMS | dmsetup create raid0
+  for i in $(seq 0 ${SEQ_END}); do
+    echo "0 1 unstriped ${NUM} ${CHUNK} ${i} /dev/mapper/raid0 0" | dmsetup create set-${i}
+  done;
+
+  for i in $(seq 0 ${SEQ_END}); do
+    dd if=/dev/urandom of=/dev/mapper/set-${i} bs=${BS} count=${COUNT} oflag=direct
+    diff /dev/mapper/set-${i} member-${i}
+  done;
+
+  for i in $(seq 0 ${SEQ_END}); do
+    dmsetup remove set-${i}
+  done
+
+  dmsetup remove raid0
+
+  for i in $(seq 0 ${SEQ_END}); do
+    losetup -d /dev/loop${i}
+    rm -f member-${i}
+  done
 
 Another example
 ---------------
@@ -81,7 +85,7 @@ Another example
 Intel NVMe drives contain two cores on the physical device.
 Each core of the drive has segregated access to its LBA range.
 The current LBA model has a RAID 0 128k chunk on each core, resulting
-in a 256k stripe across the two cores:
+in a 256k stripe across the two cores::
 
    Core 0:       Core 1:
   __________    __________
@@ -108,17 +112,24 @@ Example dmsetup usage
 
 unstriped ontop of Intel NVMe device that has 2 cores
 -----------------------------------------------------
-dmsetup create nvmset0 --table '0 512 unstriped 2 256 0 /dev/nvme0n1 0'
-dmsetup create nvmset1 --table '0 512 unstriped 2 256 1 /dev/nvme0n1 0'
+
+::
+
+  dmsetup create nvmset0 --table '0 512 unstriped 2 256 0 /dev/nvme0n1 0'
+  dmsetup create nvmset1 --table '0 512 unstriped 2 256 1 /dev/nvme0n1 0'
 
 There will now be two devices that expose Intel NVMe core 0 and 1
-respectively:
-/dev/mapper/nvmset0
-/dev/mapper/nvmset1
+respectively::
+
+  /dev/mapper/nvmset0
+  /dev/mapper/nvmset1
 
 unstriped ontop of striped with 4 drives using 128K chunk size
 --------------------------------------------------------------
-dmsetup create raid_disk0 --table '0 512 unstriped 4 256 0 /dev/mapper/striped 0'
-dmsetup create raid_disk1 --table '0 512 unstriped 4 256 1 /dev/mapper/striped 0'
-dmsetup create raid_disk2 --table '0 512 unstriped 4 256 2 /dev/mapper/striped 0'
-dmsetup create raid_disk3 --table '0 512 unstriped 4 256 3 /dev/mapper/striped 0'
+
+::
+
+  dmsetup create raid_disk0 --table '0 512 unstriped 4 256 0 /dev/mapper/striped 0'
+  dmsetup create raid_disk1 --table '0 512 unstriped 4 256 1 /dev/mapper/striped 0'
+  dmsetup create raid_disk2 --table '0 512 unstriped 4 256 2 /dev/mapper/striped 0'
+  dmsetup create raid_disk3 --table '0 512 unstriped 4 256 3 /dev/mapper/striped 0'
diff --git a/Documentation/device-mapper/verity.txt b/Documentation/device-mapper/verity.rst
similarity index 98%
rename from Documentation/device-mapper/verity.txt
rename to Documentation/device-mapper/verity.rst
index b3d2e4a42255..a4d1c1476d72 100644
--- a/Documentation/device-mapper/verity.txt
+++ b/Documentation/device-mapper/verity.rst
@@ -1,5 +1,6 @@
+=========
 dm-verity
-==========
+=========
 
 Device-Mapper's "verity" target provides transparent integrity checking of
 block devices using a cryptographic digest provided by the kernel crypto API.
@@ -7,6 +8,9 @@ This target is read-only.
 
 Construction Parameters
 =======================
+
+::
+
     <version> <dev> <hash_dev>
     <data_block_size> <hash_block_size>
     <num_data_blocks> <hash_start_block>
@@ -160,7 +164,9 @@ calculating the parent node.
 
 The tree looks something like:
 
-alg = sha256, num_blocks = 32768, block_size = 4096
+	alg = sha256, num_blocks = 32768, block_size = 4096
+
+::
 
                                  [   root    ]
                                 /    . . .    \
@@ -189,6 +195,7 @@ block boundary) are the hash blocks which are stored a depth at a time
 
 The full specification of kernel parameters and on-disk metadata format
 is available at the cryptsetup project's wiki page
+
   https://gitlab.com/cryptsetup/cryptsetup/wikis/DMVerity
 
 Status
@@ -198,7 +205,8 @@ If any check failed, C (for Corruption) is returned.
 
 Example
 =======
-Set up a device:
+Set up a device::
+
   # dmsetup create vroot --readonly --table \
     "0 2097152 verity 1 /dev/sda1 /dev/sda2 4096 4096 262144 1 sha256 "\
     "4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 "\
@@ -209,11 +217,13 @@ the hash tree or activate the kernel device. This is available from
 the cryptsetup upstream repository https://gitlab.com/cryptsetup/cryptsetup/
 (as a libcryptsetup extension).
 
-Create hash on the device:
+Create hash on the device::
+
   # veritysetup format /dev/sda1 /dev/sda2
   ...
   Root hash: 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
 
-Activate the device:
+Activate the device::
+
   # veritysetup create vroot /dev/sda1 /dev/sda2 \
     4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
diff --git a/Documentation/device-mapper/writecache.txt b/Documentation/device-mapper/writecache.rst
similarity index 96%
rename from Documentation/device-mapper/writecache.txt
rename to Documentation/device-mapper/writecache.rst
index 01532b3008ae..d3d7690f5e8d 100644
--- a/Documentation/device-mapper/writecache.txt
+++ b/Documentation/device-mapper/writecache.rst
@@ -1,3 +1,7 @@
+=================
+Writecache target
+=================
+
 The writecache target caches writes on persistent memory or on SSD. It
 doesn't cache reads because reads are supposed to be cached in page cache
 in normal RAM.
@@ -6,15 +10,18 @@ When the device is constructed, the first sector should be zeroed or the
 first sector should contain valid superblock from previous invocation.
 
 Constructor parameters:
+
 1. type of the cache device - "p" or "s"
-	p - persistent memory
-	s - SSD
+
+	- p - persistent memory
+	- s - SSD
 2. the underlying device that will be cached
 3. the cache device
 4. block size (4096 is recommended; the maximum block size is the page
    size)
 5. the number of optional parameters (the parameters with an argument
    count as two)
+
 	start_sector n		(default: 0)
 		offset from the start of cache device in 512-byte sectors
 	high_watermark n	(default: 50)
@@ -43,6 +50,7 @@ Constructor parameters:
 		applicable only to persistent memory - don't use the FUA
 		flag when writing back data and send the FLUSH request
 		afterwards
+
 		- some underlying devices perform better with fua, some
 		  with nofua. The user should test it
 
@@ -60,6 +68,7 @@ Messages:
 		flush the cache device on next suspend. Use this message
 		when you are going to remove the cache device. The proper
 		sequence for removing the cache device is:
+
 		1. send the "flush_on_suspend" message
 		2. load an inactive table with a linear target that maps
 		   to the underlying device
diff --git a/Documentation/device-mapper/zero.txt b/Documentation/device-mapper/zero.rst
similarity index 83%
rename from Documentation/device-mapper/zero.txt
rename to Documentation/device-mapper/zero.rst
index 20fb38e7fa7e..11fb5cf4597c 100644
--- a/Documentation/device-mapper/zero.txt
+++ b/Documentation/device-mapper/zero.rst
@@ -1,3 +1,4 @@
+=======
 dm-zero
 =======
 
@@ -18,20 +19,19 @@ filesystem limitations.
 
 To create a sparse device, start by creating a dm-zero device that's the
 desired size of the sparse device. For this example, we'll assume a 10TB
-sparse device.
+sparse device::
 
-TEN_TERABYTES=`expr 10 \* 1024 \* 1024 \* 1024 \* 2`   # 10 TB in sectors
-echo "0 $TEN_TERABYTES zero" | dmsetup create zero1
+  TEN_TERABYTES=`expr 10 \* 1024 \* 1024 \* 1024 \* 2`   # 10 TB in sectors
+  echo "0 $TEN_TERABYTES zero" | dmsetup create zero1
 
 Then create a snapshot of the zero device, using any available block-device as
 the COW device. The size of the COW device will determine the amount of real
 space available to the sparse device. For this example, we'll assume /dev/sdb1
-is an available 10GB partition.
+is an available 10GB partition::
 
-echo "0 $TEN_TERABYTES snapshot /dev/mapper/zero1 /dev/sdb1 p 128" | \
-   dmsetup create sparse1
+  echo "0 $TEN_TERABYTES snapshot /dev/mapper/zero1 /dev/sdb1 p 128" | \
+     dmsetup create sparse1
 
 This will create a 10TB sparse device called /dev/mapper/sparse1 that has
 10GB of actual storage space available. If more than 10GB of data is written
 to this device, it will start returning I/O errors.
-
diff --git a/Documentation/filesystems/ubifs-authentication.md b/Documentation/filesystems/ubifs-authentication.md
index 028b3e2e25f9..23e698167141 100644
--- a/Documentation/filesystems/ubifs-authentication.md
+++ b/Documentation/filesystems/ubifs-authentication.md
@@ -417,9 +417,9 @@ will then have to be provided beforehand in the normal way.
 
 [DMC-CBC-ATTACK]     http://www.jakoblell.com/blog/2013/12/22/practical-malleability-attack-against-cbc-encrypted-luks-partitions/
 
-[DM-INTEGRITY]       https://www.kernel.org/doc/Documentation/device-mapper/dm-integrity.txt
+[DM-INTEGRITY]       https://www.kernel.org/doc/Documentation/device-mapper/dm-integrity.rst
 
-[DM-VERITY]          https://www.kernel.org/doc/Documentation/device-mapper/verity.txt
+[DM-VERITY]          https://www.kernel.org/doc/Documentation/device-mapper/verity.rst
 
 [FSCRYPT-POLICY2]    https://www.spinics.net/lists/linux-ext4/msg58710.html
 
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index 2557f198e175..5d58498fb84c 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -443,7 +443,7 @@ config DM_INIT
 	Enable "dm-mod.create=" parameter to create mapped devices at init time.
 	This option is useful to allow mounting rootfs without requiring an
 	initramfs.
-	See Documentation/device-mapper/dm-init.txt for dm-mod.create="..."
+	See Documentation/device-mapper/dm-init.rst for dm-mod.create="..."
 	format.
 
 	If unsure, say N.
diff --git a/drivers/md/dm-init.c b/drivers/md/dm-init.c
index 4b76f84424c3..eedaef255ba3 100644
--- a/drivers/md/dm-init.c
+++ b/drivers/md/dm-init.c
@@ -25,7 +25,7 @@ static char *create;
  * Format: dm-mod.create=<name>,<uuid>,<minor>,<flags>,<table>[,<table>+][;<name>,<uuid>,<minor>,<flags>,<table>[,<table>+]+]
  * Table format: <start_sector> <num_sectors> <target_type> <target_args>
  *
- * See Documentation/device-mapper/dm-init.txt for dm-mod.create="..." format
+ * See Documentation/device-mapper/dm-init.rst for dm-mod.create="..." format
  * details.
  */
 
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index 9fdef6897316..7a87a640f8ba 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -3558,7 +3558,7 @@ static void raid_status(struct dm_target *ti, status_type_t type,
 		 * v1.5.0+:
 		 *
 		 * Sync action:
-		 *   See Documentation/device-mapper/dm-raid.txt for
+		 *   See Documentation/device-mapper/dm-raid.rst for
 		 *   information on each of these states.
 		 */
 		DMEMIT(" %s", sync_action);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 12/79] docs: fault-injection: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (10 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 11/79] docs: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 13/79] docs: fb: " Mauro Carvalho Chehab
                     ` (65 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Akinobu Mita, Federico Vaga, Harry Wei,
	Alex Shi, Kees Cook, Arnd Bergmann, Greg Kroah-Hartman

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 ...ault-injection.txt => fault-injection.rst} | 265 +++++++++---------
 Documentation/fault-injection/index.rst       |  20 ++
 ...r-inject.txt => notifier-error-inject.rst} |  18 +-
 .../fault-injection/nvme-fault-injection.rst  | 120 ++++++++
 .../fault-injection/nvme-fault-injection.txt  | 116 --------
 .../fault-injection/provoke-crashes.rst       |  48 ++++
 .../fault-injection/provoke-crashes.txt       |  38 ---
 Documentation/process/4.Coding.rst            |   2 +-
 .../translations/it_IT/process/4.Coding.rst   |   2 +-
 .../translations/zh_CN/process/4.Coding.rst   |   2 +-
 drivers/misc/lkdtm/core.c                     |   2 +-
 include/linux/fault-inject.h                  |   2 +-
 lib/Kconfig.debug                             |   2 +-
 tools/testing/fault-injection/failcmd.sh      |   2 +-
 14 files changed, 344 insertions(+), 295 deletions(-)
 rename Documentation/fault-injection/{fault-injection.txt => fault-injection.rst} (68%)
 create mode 100644 Documentation/fault-injection/index.rst
 rename Documentation/fault-injection/{notifier-error-inject.txt => notifier-error-inject.rst} (83%)
 create mode 100644 Documentation/fault-injection/nvme-fault-injection.rst
 delete mode 100644 Documentation/fault-injection/nvme-fault-injection.txt
 create mode 100644 Documentation/fault-injection/provoke-crashes.rst
 delete mode 100644 Documentation/fault-injection/provoke-crashes.txt

diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.rst
similarity index 68%
rename from Documentation/fault-injection/fault-injection.txt
rename to Documentation/fault-injection/fault-injection.rst
index a17517a083c3..f51bb21d20e4 100644
--- a/Documentation/fault-injection/fault-injection.txt
+++ b/Documentation/fault-injection/fault-injection.rst
@@ -1,3 +1,4 @@
+===========================================
 Fault injection capabilities infrastructure
 ===========================================
 
@@ -7,36 +8,36 @@ See also drivers/md/md-faulty.c and "every_nth" module option for scsi_debug.
 Available fault injection capabilities
 --------------------------------------
 
-o failslab
+- failslab
 
   injects slab allocation failures. (kmalloc(), kmem_cache_alloc(), ...)
 
-o fail_page_alloc
+- fail_page_alloc
 
   injects page allocation failures. (alloc_pages(), get_free_pages(), ...)
 
-o fail_futex
+- fail_futex
 
   injects futex deadlock and uaddr fault errors.
 
-o fail_make_request
+- fail_make_request
 
   injects disk IO errors on devices permitted by setting
   /sys/block/<device>/make-it-fail or
   /sys/block/<device>/<partition>/make-it-fail. (generic_make_request())
 
-o fail_mmc_request
+- fail_mmc_request
 
   injects MMC data errors on devices permitted by setting
   debugfs entries under /sys/kernel/debug/mmc0/fail_mmc_request
 
-o fail_function
+- fail_function
 
   injects error return on specific functions, which are marked by
   ALLOW_ERROR_INJECTION() macro, by setting debugfs entries
   under /sys/kernel/debug/fail_function. No boot option supported.
 
-o NVMe fault injection
+- NVMe fault injection
 
   inject NVMe status code and retry flag on devices permitted by setting
   debugfs entries under /sys/kernel/debug/nvme*/fault_inject. The default
@@ -47,7 +48,8 @@ o NVMe fault injection
 Configure fault-injection capabilities behavior
 -----------------------------------------------
 
-o debugfs entries
+debugfs entries
+^^^^^^^^^^^^^^^
 
 fault-inject-debugfs kernel module provides some debugfs entries for runtime
 configuration of fault-injection capabilities.
@@ -55,6 +57,7 @@ configuration of fault-injection capabilities.
 - /sys/kernel/debug/fail*/probability:
 
 	likelihood of failure injection, in percent.
+
 	Format: <percent>
 
 	Note that one-failure-per-hundred is a very high error rate
@@ -83,6 +86,7 @@ configuration of fault-injection capabilities.
 - /sys/kernel/debug/fail*/verbose
 
 	Format: { 0 | 1 | 2 }
+
 	specifies the verbosity of the messages when failure is
 	injected.  '0' means no messages; '1' will print only a single
 	log line per failure; '2' will print a call trace too -- useful
@@ -91,14 +95,15 @@ configuration of fault-injection capabilities.
 - /sys/kernel/debug/fail*/task-filter:
 
 	Format: { 'Y' | 'N' }
+
 	A value of 'N' disables filtering by process (default).
 	Any positive value limits failures to only processes indicated by
 	/proc/<pid>/make-it-fail==1.
 
-- /sys/kernel/debug/fail*/require-start:
-- /sys/kernel/debug/fail*/require-end:
-- /sys/kernel/debug/fail*/reject-start:
-- /sys/kernel/debug/fail*/reject-end:
+- /sys/kernel/debug/fail*/require-start,
+  /sys/kernel/debug/fail*/require-end,
+  /sys/kernel/debug/fail*/reject-start,
+  /sys/kernel/debug/fail*/reject-end:
 
 	specifies the range of virtual addresses tested during
 	stacktrace walking.  Failure is injected only if some caller
@@ -116,6 +121,7 @@ configuration of fault-injection capabilities.
 - /sys/kernel/debug/fail_page_alloc/ignore-gfp-highmem:
 
 	Format: { 'Y' | 'N' }
+
 	default is 'N', setting it to 'Y' won't inject failures into
 	highmem/user allocations.
 
@@ -123,6 +129,7 @@ configuration of fault-injection capabilities.
 - /sys/kernel/debug/fail_page_alloc/ignore-gfp-wait:
 
 	Format: { 'Y' | 'N' }
+
 	default is 'N', setting it to 'Y' will inject failures
 	only into non-sleep allocations (GFP_ATOMIC allocations).
 
@@ -134,12 +141,14 @@ configuration of fault-injection capabilities.
 - /sys/kernel/debug/fail_futex/ignore-private:
 
 	Format: { 'Y' | 'N' }
+
 	default is 'N', setting it to 'Y' will disable failure injections
 	when dealing with private (address space) futexes.
 
 - /sys/kernel/debug/fail_function/inject:
 
 	Format: { 'function-name' | '!function-name' | '' }
+
 	specifies the target function of error injection by name.
 	If the function name leads '!' prefix, given function is
 	removed from injection list. If nothing specified ('')
@@ -160,10 +169,11 @@ configuration of fault-injection capabilities.
 	function for given function. This will be created when
 	user specifies new injection entry.
 
-o Boot option
+Boot option
+^^^^^^^^^^^
 
 In order to inject faults while debugfs is not available (early boot time),
-use the boot option:
+use the boot option::
 
 	failslab=
 	fail_page_alloc=
@@ -171,10 +181,11 @@ use the boot option:
 	fail_futex=
 	mmc_core.fail_request=<interval>,<probability>,<space>,<times>
 
-o proc entries
+proc entries
+^^^^^^^^^^^^
 
-- /proc/<pid>/fail-nth:
-- /proc/self/task/<tid>/fail-nth:
+- /proc/<pid>/fail-nth,
+  /proc/self/task/<tid>/fail-nth:
 
 	Write to this file of integer N makes N-th call in the task fail.
 	Read from this file returns a integer value. A value of '0' indicates
@@ -191,16 +202,16 @@ o proc entries
 How to add new fault injection capability
 -----------------------------------------
 
-o #include <linux/fault-inject.h>
+- #include <linux/fault-inject.h>
 
-o define the fault attributes
+- define the fault attributes
 
   DECLARE_FAULT_ATTR(name);
 
   Please see the definition of struct fault_attr in fault-inject.h
   for details.
 
-o provide a way to configure fault attributes
+- provide a way to configure fault attributes
 
 - boot option
 
@@ -222,126 +233,126 @@ o provide a way to configure fault attributes
   single kernel module, it is better to provide module parameters to
   configure the fault attributes.
 
-o add a hook to insert failures
+- add a hook to insert failures
 
-  Upon should_fail() returning true, client code should inject a failure.
+  Upon should_fail() returning true, client code should inject a failure:
 
 	should_fail(attr, size);
 
 Application Examples
 --------------------
 
-o Inject slab allocation failures into module init/exit code
+- Inject slab allocation failures into module init/exit code::
 
-#!/bin/bash
+    #!/bin/bash
 
-FAILTYPE=failslab
-echo Y > /sys/kernel/debug/$FAILTYPE/task-filter
-echo 10 > /sys/kernel/debug/$FAILTYPE/probability
-echo 100 > /sys/kernel/debug/$FAILTYPE/interval
-echo -1 > /sys/kernel/debug/$FAILTYPE/times
-echo 0 > /sys/kernel/debug/$FAILTYPE/space
-echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
-echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
+    FAILTYPE=failslab
+    echo Y > /sys/kernel/debug/$FAILTYPE/task-filter
+    echo 10 > /sys/kernel/debug/$FAILTYPE/probability
+    echo 100 > /sys/kernel/debug/$FAILTYPE/interval
+    echo -1 > /sys/kernel/debug/$FAILTYPE/times
+    echo 0 > /sys/kernel/debug/$FAILTYPE/space
+    echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
+    echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
 
-faulty_system()
-{
+    faulty_system()
+    {
 	bash -c "echo 1 > /proc/self/make-it-fail && exec $*"
-}
+    }
 
-if [ $# -eq 0 ]
-then
+    if [ $# -eq 0 ]
+    then
 	echo "Usage: $0 modulename [ modulename ... ]"
 	exit 1
-fi
+    fi
 
-for m in $*
-do
+    for m in $*
+    do
 	echo inserting $m...
 	faulty_system modprobe $m
 
 	echo removing $m...
 	faulty_system modprobe -r $m
-done
+    done
 
 ------------------------------------------------------------------------------
 
-o Inject page allocation failures only for a specific module
+- Inject page allocation failures only for a specific module::
 
-#!/bin/bash
+    #!/bin/bash
 
-FAILTYPE=fail_page_alloc
-module=$1
+    FAILTYPE=fail_page_alloc
+    module=$1
 
-if [ -z $module ]
-then
+    if [ -z $module ]
+    then
 	echo "Usage: $0 <modulename>"
 	exit 1
-fi
+    fi
 
-modprobe $module
+    modprobe $module
 
-if [ ! -d /sys/module/$module/sections ]
-then
+    if [ ! -d /sys/module/$module/sections ]
+    then
 	echo Module $module is not loaded
 	exit 1
-fi
+    fi
 
-cat /sys/module/$module/sections/.text > /sys/kernel/debug/$FAILTYPE/require-start
-cat /sys/module/$module/sections/.data > /sys/kernel/debug/$FAILTYPE/require-end
+    cat /sys/module/$module/sections/.text > /sys/kernel/debug/$FAILTYPE/require-start
+    cat /sys/module/$module/sections/.data > /sys/kernel/debug/$FAILTYPE/require-end
 
-echo N > /sys/kernel/debug/$FAILTYPE/task-filter
-echo 10 > /sys/kernel/debug/$FAILTYPE/probability
-echo 100 > /sys/kernel/debug/$FAILTYPE/interval
-echo -1 > /sys/kernel/debug/$FAILTYPE/times
-echo 0 > /sys/kernel/debug/$FAILTYPE/space
-echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
-echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
-echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-highmem
-echo 10 > /sys/kernel/debug/$FAILTYPE/stacktrace-depth
+    echo N > /sys/kernel/debug/$FAILTYPE/task-filter
+    echo 10 > /sys/kernel/debug/$FAILTYPE/probability
+    echo 100 > /sys/kernel/debug/$FAILTYPE/interval
+    echo -1 > /sys/kernel/debug/$FAILTYPE/times
+    echo 0 > /sys/kernel/debug/$FAILTYPE/space
+    echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
+    echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
+    echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-highmem
+    echo 10 > /sys/kernel/debug/$FAILTYPE/stacktrace-depth
 
-trap "echo 0 > /sys/kernel/debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT
+    trap "echo 0 > /sys/kernel/debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT
 
-echo "Injecting errors into the module $module... (interrupt to stop)"
-sleep 1000000
+    echo "Injecting errors into the module $module... (interrupt to stop)"
+    sleep 1000000
 
 ------------------------------------------------------------------------------
 
-o Inject open_ctree error while btrfs mount
+- Inject open_ctree error while btrfs mount::
 
-#!/bin/bash
+    #!/bin/bash
 
-rm -f testfile.img
-dd if=/dev/zero of=testfile.img bs=1M seek=1000 count=1
-DEVICE=$(losetup --show -f testfile.img)
-mkfs.btrfs -f $DEVICE
-mkdir -p tmpmnt
+    rm -f testfile.img
+    dd if=/dev/zero of=testfile.img bs=1M seek=1000 count=1
+    DEVICE=$(losetup --show -f testfile.img)
+    mkfs.btrfs -f $DEVICE
+    mkdir -p tmpmnt
 
-FAILTYPE=fail_function
-FAILFUNC=open_ctree
-echo $FAILFUNC > /sys/kernel/debug/$FAILTYPE/inject
-echo -12 > /sys/kernel/debug/$FAILTYPE/$FAILFUNC/retval
-echo N > /sys/kernel/debug/$FAILTYPE/task-filter
-echo 100 > /sys/kernel/debug/$FAILTYPE/probability
-echo 0 > /sys/kernel/debug/$FAILTYPE/interval
-echo -1 > /sys/kernel/debug/$FAILTYPE/times
-echo 0 > /sys/kernel/debug/$FAILTYPE/space
-echo 1 > /sys/kernel/debug/$FAILTYPE/verbose
+    FAILTYPE=fail_function
+    FAILFUNC=open_ctree
+    echo $FAILFUNC > /sys/kernel/debug/$FAILTYPE/inject
+    echo -12 > /sys/kernel/debug/$FAILTYPE/$FAILFUNC/retval
+    echo N > /sys/kernel/debug/$FAILTYPE/task-filter
+    echo 100 > /sys/kernel/debug/$FAILTYPE/probability
+    echo 0 > /sys/kernel/debug/$FAILTYPE/interval
+    echo -1 > /sys/kernel/debug/$FAILTYPE/times
+    echo 0 > /sys/kernel/debug/$FAILTYPE/space
+    echo 1 > /sys/kernel/debug/$FAILTYPE/verbose
 
-mount -t btrfs $DEVICE tmpmnt
-if [ $? -ne 0 ]
-then
+    mount -t btrfs $DEVICE tmpmnt
+    if [ $? -ne 0 ]
+    then
 	echo "SUCCESS!"
-else
+    else
 	echo "FAILED!"
 	umount tmpmnt
-fi
+    fi
 
-echo > /sys/kernel/debug/$FAILTYPE/inject
+    echo > /sys/kernel/debug/$FAILTYPE/inject
 
-rmdir tmpmnt
-losetup -d $DEVICE
-rm testfile.img
+    rmdir tmpmnt
+    losetup -d $DEVICE
+    rm testfile.img
 
 
 Tool to run command with failslab or fail_page_alloc
@@ -354,43 +365,43 @@ see the following examples.
 Examples:
 
 Run a command "make -C tools/testing/selftests/ run_tests" with injecting slab
-allocation failure.
+allocation failure::
 
 	# ./tools/testing/fault-injection/failcmd.sh \
 		-- make -C tools/testing/selftests/ run_tests
 
 Same as above except to specify 100 times failures at most instead of one time
-at most by default.
+at most by default::
 
 	# ./tools/testing/fault-injection/failcmd.sh --times=100 \
 		-- make -C tools/testing/selftests/ run_tests
 
 Same as above except to inject page allocation failure instead of slab
-allocation failure.
+allocation failure::
 
 	# env FAILCMD_TYPE=fail_page_alloc \
 		./tools/testing/fault-injection/failcmd.sh --times=100 \
-                -- make -C tools/testing/selftests/ run_tests
+		-- make -C tools/testing/selftests/ run_tests
 
 Systematic faults using fail-nth
 ---------------------------------
 
 The following code systematically faults 0-th, 1-st, 2-nd and so on
-capabilities in the socketpair() system call.
+capabilities in the socketpair() system call::
 
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/socket.h>
-#include <sys/syscall.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <errno.h>
+  #include <sys/types.h>
+  #include <sys/stat.h>
+  #include <sys/socket.h>
+  #include <sys/syscall.h>
+  #include <fcntl.h>
+  #include <unistd.h>
+  #include <string.h>
+  #include <stdlib.h>
+  #include <stdio.h>
+  #include <errno.h>
 
-int main()
-{
+  int main()
+  {
 	int i, err, res, fail_nth, fds[2];
 	char buf[128];
 
@@ -413,23 +424,23 @@ int main()
 			break;
 	}
 	return 0;
-}
+  }
 
-An example output:
+An example output::
 
-1-th fault Y: res=-1/23
-2-th fault Y: res=-1/23
-3-th fault Y: res=-1/12
-4-th fault Y: res=-1/12
-5-th fault Y: res=-1/23
-6-th fault Y: res=-1/23
-7-th fault Y: res=-1/23
-8-th fault Y: res=-1/12
-9-th fault Y: res=-1/12
-10-th fault Y: res=-1/12
-11-th fault Y: res=-1/12
-12-th fault Y: res=-1/12
-13-th fault Y: res=-1/12
-14-th fault Y: res=-1/12
-15-th fault Y: res=-1/12
-16-th fault N: res=0/12
+	1-th fault Y: res=-1/23
+	2-th fault Y: res=-1/23
+	3-th fault Y: res=-1/12
+	4-th fault Y: res=-1/12
+	5-th fault Y: res=-1/23
+	6-th fault Y: res=-1/23
+	7-th fault Y: res=-1/23
+	8-th fault Y: res=-1/12
+	9-th fault Y: res=-1/12
+	10-th fault Y: res=-1/12
+	11-th fault Y: res=-1/12
+	12-th fault Y: res=-1/12
+	13-th fault Y: res=-1/12
+	14-th fault Y: res=-1/12
+	15-th fault Y: res=-1/12
+	16-th fault N: res=0/12
diff --git a/Documentation/fault-injection/index.rst b/Documentation/fault-injection/index.rst
new file mode 100644
index 000000000000..92b5639ed07a
--- /dev/null
+++ b/Documentation/fault-injection/index.rst
@@ -0,0 +1,20 @@
+:orphan:
+
+===============
+fault-injection
+===============
+
+.. toctree::
+    :maxdepth: 1
+
+    fault-injection
+    notifier-error-inject
+    nvme-fault-injection
+    provoke-crashes
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/fault-injection/notifier-error-inject.txt b/Documentation/fault-injection/notifier-error-inject.rst
similarity index 83%
rename from Documentation/fault-injection/notifier-error-inject.txt
rename to Documentation/fault-injection/notifier-error-inject.rst
index e861d761de24..1668b6e48d3a 100644
--- a/Documentation/fault-injection/notifier-error-inject.txt
+++ b/Documentation/fault-injection/notifier-error-inject.rst
@@ -14,7 +14,8 @@ modules that can be used to test the following notifiers.
 PM notifier error injection module
 ----------------------------------
 This feature is controlled through debugfs interface
-/sys/kernel/debug/notifier-error-inject/pm/actions/<notifier event>/error
+
+  /sys/kernel/debug/notifier-error-inject/pm/actions/<notifier event>/error
 
 Possible PM notifier events to be failed are:
 
@@ -22,7 +23,7 @@ Possible PM notifier events to be failed are:
  * PM_SUSPEND_PREPARE
  * PM_RESTORE_PREPARE
 
-Example: Inject PM suspend error (-12 = -ENOMEM)
+Example: Inject PM suspend error (-12 = -ENOMEM)::
 
 	# cd /sys/kernel/debug/notifier-error-inject/pm/
 	# echo -12 > actions/PM_SUSPEND_PREPARE/error
@@ -32,14 +33,15 @@ Example: Inject PM suspend error (-12 = -ENOMEM)
 Memory hotplug notifier error injection module
 ----------------------------------------------
 This feature is controlled through debugfs interface
-/sys/kernel/debug/notifier-error-inject/memory/actions/<notifier event>/error
+
+  /sys/kernel/debug/notifier-error-inject/memory/actions/<notifier event>/error
 
 Possible memory notifier events to be failed are:
 
  * MEM_GOING_ONLINE
  * MEM_GOING_OFFLINE
 
-Example: Inject memory hotplug offline error (-12 == -ENOMEM)
+Example: Inject memory hotplug offline error (-12 == -ENOMEM)::
 
 	# cd /sys/kernel/debug/notifier-error-inject/memory
 	# echo -12 > actions/MEM_GOING_OFFLINE/error
@@ -49,7 +51,8 @@ Example: Inject memory hotplug offline error (-12 == -ENOMEM)
 powerpc pSeries reconfig notifier error injection module
 --------------------------------------------------------
 This feature is controlled through debugfs interface
-/sys/kernel/debug/notifier-error-inject/pSeries-reconfig/actions/<notifier event>/error
+
+  /sys/kernel/debug/notifier-error-inject/pSeries-reconfig/actions/<notifier event>/error
 
 Possible pSeries reconfig notifier events to be failed are:
 
@@ -61,7 +64,8 @@ Possible pSeries reconfig notifier events to be failed are:
 Netdevice notifier error injection module
 ----------------------------------------------
 This feature is controlled through debugfs interface
-/sys/kernel/debug/notifier-error-inject/netdev/actions/<notifier event>/error
+
+  /sys/kernel/debug/notifier-error-inject/netdev/actions/<notifier event>/error
 
 Netdevice notifier events which can be failed are:
 
@@ -75,7 +79,7 @@ Netdevice notifier events which can be failed are:
  * NETDEV_PRECHANGEUPPER
  * NETDEV_CHANGEUPPER
 
-Example: Inject netdevice mtu change error (-22 == -EINVAL)
+Example: Inject netdevice mtu change error (-22 == -EINVAL)::
 
 	# cd /sys/kernel/debug/notifier-error-inject/netdev
 	# echo -22 > actions/NETDEV_CHANGEMTU/error
diff --git a/Documentation/fault-injection/nvme-fault-injection.rst b/Documentation/fault-injection/nvme-fault-injection.rst
new file mode 100644
index 000000000000..bbb1bf3e8650
--- /dev/null
+++ b/Documentation/fault-injection/nvme-fault-injection.rst
@@ -0,0 +1,120 @@
+NVMe Fault Injection
+====================
+Linux's fault injection framework provides a systematic way to support
+error injection via debugfs in the /sys/kernel/debug directory. When
+enabled, the default NVME_SC_INVALID_OPCODE with no retry will be
+injected into the nvme_end_request. Users can change the default status
+code and no retry flag via the debugfs. The list of Generic Command
+Status can be found in include/linux/nvme.h
+
+Following examples show how to inject an error into the nvme.
+
+First, enable CONFIG_FAULT_INJECTION_DEBUG_FS kernel config,
+recompile the kernel. After booting up the kernel, do the
+following.
+
+Example 1: Inject default status code with no retry
+---------------------------------------------------
+
+::
+
+  mount /dev/nvme0n1 /mnt
+  echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/times
+  echo 100 > /sys/kernel/debug/nvme0n1/fault_inject/probability
+  cp a.file /mnt
+
+Expected Result::
+
+  cp: cannot stat ‘/mnt/a.file’: Input/output error
+
+Message from dmesg::
+
+  FAULT_INJECTION: forcing a failure.
+  name fault_inject, interval 1, probability 100, space 0, times 1
+  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc8+ #2
+  Hardware name: innotek GmbH VirtualBox/VirtualBox,
+  BIOS VirtualBox 12/01/2006
+  Call Trace:
+    <IRQ>
+    dump_stack+0x5c/0x7d
+    should_fail+0x148/0x170
+    nvme_should_fail+0x2f/0x50 [nvme_core]
+    nvme_process_cq+0xe7/0x1d0 [nvme]
+    nvme_irq+0x1e/0x40 [nvme]
+    __handle_irq_event_percpu+0x3a/0x190
+    handle_irq_event_percpu+0x30/0x70
+    handle_irq_event+0x36/0x60
+    handle_fasteoi_irq+0x78/0x120
+    handle_irq+0xa7/0x130
+    ? tick_irq_enter+0xa8/0xc0
+    do_IRQ+0x43/0xc0
+    common_interrupt+0xa2/0xa2
+    </IRQ>
+  RIP: 0010:native_safe_halt+0x2/0x10
+  RSP: 0018:ffffffff82003e90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd
+  RAX: ffffffff817a10c0 RBX: ffffffff82012480 RCX: 0000000000000000
+  RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
+  RBP: 0000000000000000 R08: 000000008e38ce64 R09: 0000000000000000
+  R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82012480
+  R13: ffffffff82012480 R14: 0000000000000000 R15: 0000000000000000
+    ? __sched_text_end+0x4/0x4
+    default_idle+0x18/0xf0
+    do_idle+0x150/0x1d0
+    cpu_startup_entry+0x6f/0x80
+    start_kernel+0x4c4/0x4e4
+    ? set_init_arg+0x55/0x55
+    secondary_startup_64+0xa5/0xb0
+    print_req_error: I/O error, dev nvme0n1, sector 9240
+  EXT4-fs error (device nvme0n1): ext4_find_entry:1436:
+  inode #2: comm cp: reading directory lblock 0
+
+Example 2: Inject default status code with retry
+------------------------------------------------
+
+::
+
+  mount /dev/nvme0n1 /mnt
+  echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/times
+  echo 100 > /sys/kernel/debug/nvme0n1/fault_inject/probability
+  echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/status
+  echo 0 > /sys/kernel/debug/nvme0n1/fault_inject/dont_retry
+
+  cp a.file /mnt
+
+Expected Result::
+
+  command success without error
+
+Message from dmesg::
+
+  FAULT_INJECTION: forcing a failure.
+  name fault_inject, interval 1, probability 100, space 0, times 1
+  CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc8+ #4
+  Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
+  Call Trace:
+    <IRQ>
+    dump_stack+0x5c/0x7d
+    should_fail+0x148/0x170
+    nvme_should_fail+0x30/0x60 [nvme_core]
+    nvme_loop_queue_response+0x84/0x110 [nvme_loop]
+    nvmet_req_complete+0x11/0x40 [nvmet]
+    nvmet_bio_done+0x28/0x40 [nvmet]
+    blk_update_request+0xb0/0x310
+    blk_mq_end_request+0x18/0x60
+    flush_smp_call_function_queue+0x3d/0xf0
+    smp_call_function_single_interrupt+0x2c/0xc0
+    call_function_single_interrupt+0xa2/0xb0
+    </IRQ>
+  RIP: 0010:native_safe_halt+0x2/0x10
+  RSP: 0018:ffffc9000068bec0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff04
+  RAX: ffffffff817a10c0 RBX: ffff88011a3c9680 RCX: 0000000000000000
+  RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
+  RBP: 0000000000000001 R08: 000000008e38c131 R09: 0000000000000000
+  R10: 0000000000000000 R11: 0000000000000000 R12: ffff88011a3c9680
+  R13: ffff88011a3c9680 R14: 0000000000000000 R15: 0000000000000000
+    ? __sched_text_end+0x4/0x4
+    default_idle+0x18/0xf0
+    do_idle+0x150/0x1d0
+    cpu_startup_entry+0x6f/0x80
+    start_secondary+0x187/0x1e0
+    secondary_startup_64+0xa5/0xb0
diff --git a/Documentation/fault-injection/nvme-fault-injection.txt b/Documentation/fault-injection/nvme-fault-injection.txt
deleted file mode 100644
index 8fbf3bf60b62..000000000000
--- a/Documentation/fault-injection/nvme-fault-injection.txt
+++ /dev/null
@@ -1,116 +0,0 @@
-NVMe Fault Injection
-====================
-Linux's fault injection framework provides a systematic way to support
-error injection via debugfs in the /sys/kernel/debug directory. When
-enabled, the default NVME_SC_INVALID_OPCODE with no retry will be
-injected into the nvme_end_request. Users can change the default status
-code and no retry flag via the debugfs. The list of Generic Command
-Status can be found in include/linux/nvme.h
-
-Following examples show how to inject an error into the nvme.
-
-First, enable CONFIG_FAULT_INJECTION_DEBUG_FS kernel config,
-recompile the kernel. After booting up the kernel, do the
-following.
-
-Example 1: Inject default status code with no retry
----------------------------------------------------
-
-mount /dev/nvme0n1 /mnt
-echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/times
-echo 100 > /sys/kernel/debug/nvme0n1/fault_inject/probability
-cp a.file /mnt
-
-Expected Result:
-
-cp: cannot stat ‘/mnt/a.file’: Input/output error
-
-Message from dmesg:
-
-FAULT_INJECTION: forcing a failure.
-name fault_inject, interval 1, probability 100, space 0, times 1
-CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc8+ #2
-Hardware name: innotek GmbH VirtualBox/VirtualBox,
-BIOS VirtualBox 12/01/2006
-Call Trace:
-  <IRQ>
-  dump_stack+0x5c/0x7d
-  should_fail+0x148/0x170
-  nvme_should_fail+0x2f/0x50 [nvme_core]
-  nvme_process_cq+0xe7/0x1d0 [nvme]
-  nvme_irq+0x1e/0x40 [nvme]
-  __handle_irq_event_percpu+0x3a/0x190
-  handle_irq_event_percpu+0x30/0x70
-  handle_irq_event+0x36/0x60
-  handle_fasteoi_irq+0x78/0x120
-  handle_irq+0xa7/0x130
-  ? tick_irq_enter+0xa8/0xc0
-  do_IRQ+0x43/0xc0
-  common_interrupt+0xa2/0xa2
-  </IRQ>
-RIP: 0010:native_safe_halt+0x2/0x10
-RSP: 0018:ffffffff82003e90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd
-RAX: ffffffff817a10c0 RBX: ffffffff82012480 RCX: 0000000000000000
-RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
-RBP: 0000000000000000 R08: 000000008e38ce64 R09: 0000000000000000
-R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82012480
-R13: ffffffff82012480 R14: 0000000000000000 R15: 0000000000000000
-  ? __sched_text_end+0x4/0x4
-  default_idle+0x18/0xf0
-  do_idle+0x150/0x1d0
-  cpu_startup_entry+0x6f/0x80
-  start_kernel+0x4c4/0x4e4
-  ? set_init_arg+0x55/0x55
-  secondary_startup_64+0xa5/0xb0
-  print_req_error: I/O error, dev nvme0n1, sector 9240
-EXT4-fs error (device nvme0n1): ext4_find_entry:1436:
-inode #2: comm cp: reading directory lblock 0
-
-Example 2: Inject default status code with retry
-------------------------------------------------
-
-mount /dev/nvme0n1 /mnt
-echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/times
-echo 100 > /sys/kernel/debug/nvme0n1/fault_inject/probability
-echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/status
-echo 0 > /sys/kernel/debug/nvme0n1/fault_inject/dont_retry
-
-cp a.file /mnt
-
-Expected Result:
-
-command success without error
-
-Message from dmesg:
-
-FAULT_INJECTION: forcing a failure.
-name fault_inject, interval 1, probability 100, space 0, times 1
-CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc8+ #4
-Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
-Call Trace:
-  <IRQ>
-  dump_stack+0x5c/0x7d
-  should_fail+0x148/0x170
-  nvme_should_fail+0x30/0x60 [nvme_core]
-  nvme_loop_queue_response+0x84/0x110 [nvme_loop]
-  nvmet_req_complete+0x11/0x40 [nvmet]
-  nvmet_bio_done+0x28/0x40 [nvmet]
-  blk_update_request+0xb0/0x310
-  blk_mq_end_request+0x18/0x60
-  flush_smp_call_function_queue+0x3d/0xf0
-  smp_call_function_single_interrupt+0x2c/0xc0
-  call_function_single_interrupt+0xa2/0xb0
-  </IRQ>
-RIP: 0010:native_safe_halt+0x2/0x10
-RSP: 0018:ffffc9000068bec0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff04
-RAX: ffffffff817a10c0 RBX: ffff88011a3c9680 RCX: 0000000000000000
-RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
-RBP: 0000000000000001 R08: 000000008e38c131 R09: 0000000000000000
-R10: 0000000000000000 R11: 0000000000000000 R12: ffff88011a3c9680
-R13: ffff88011a3c9680 R14: 0000000000000000 R15: 0000000000000000
-  ? __sched_text_end+0x4/0x4
-  default_idle+0x18/0xf0
-  do_idle+0x150/0x1d0
-  cpu_startup_entry+0x6f/0x80
-  start_secondary+0x187/0x1e0
-  secondary_startup_64+0xa5/0xb0
diff --git a/Documentation/fault-injection/provoke-crashes.rst b/Documentation/fault-injection/provoke-crashes.rst
new file mode 100644
index 000000000000..9279a3e12278
--- /dev/null
+++ b/Documentation/fault-injection/provoke-crashes.rst
@@ -0,0 +1,48 @@
+===============
+Provoke crashes
+===============
+
+The lkdtm module provides an interface to crash or injure the kernel at
+predefined crashpoints to evaluate the reliability of crash dumps obtained
+using different dumping solutions. The module uses KPROBEs to instrument
+crashing points, but can also crash the kernel directly without KRPOBE
+support.
+
+
+You can provide the way either through module arguments when inserting
+the module, or through a debugfs interface.
+
+Usage::
+
+	insmod lkdtm.ko [recur_count={>0}] cpoint_name=<> cpoint_type=<>
+			[cpoint_count={>0}]
+
+recur_count
+	Recursion level for the stack overflow test. Default is 10.
+
+cpoint_name
+	Crash point where the kernel is to be crashed. It can be
+	one of INT_HARDWARE_ENTRY, INT_HW_IRQ_EN, INT_TASKLET_ENTRY,
+	FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_DISPATCH_CMD,
+	IDE_CORE_CP, DIRECT
+
+cpoint_type
+	Indicates the action to be taken on hitting the crash point.
+	It can be one of PANIC, BUG, EXCEPTION, LOOP, OVERFLOW,
+	CORRUPT_STACK, UNALIGNED_LOAD_STORE_WRITE, OVERWRITE_ALLOCATION,
+	WRITE_AFTER_FREE,
+
+cpoint_count
+	Indicates the number of times the crash point is to be hit
+	to trigger an action. The default is 10.
+
+You can also induce failures by mounting debugfs and writing the type to
+<mountpoint>/provoke-crash/<crashpoint>. E.g.::
+
+  mount -t debugfs debugfs /mnt
+  echo EXCEPTION > /mnt/provoke-crash/INT_HARDWARE_ENTRY
+
+
+A special file is `DIRECT` which will induce the crash directly without
+KPROBE instrumentation. This mode is the only one available when the module
+is built on a kernel without KPROBEs support.
diff --git a/Documentation/fault-injection/provoke-crashes.txt b/Documentation/fault-injection/provoke-crashes.txt
deleted file mode 100644
index 7a9d3d81525b..000000000000
--- a/Documentation/fault-injection/provoke-crashes.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-The lkdtm module provides an interface to crash or injure the kernel at
-predefined crashpoints to evaluate the reliability of crash dumps obtained
-using different dumping solutions. The module uses KPROBEs to instrument
-crashing points, but can also crash the kernel directly without KRPOBE
-support.
-
-
-You can provide the way either through module arguments when inserting
-the module, or through a debugfs interface.
-
-Usage: insmod lkdtm.ko [recur_count={>0}] cpoint_name=<> cpoint_type=<>
-				[cpoint_count={>0}]
-
-  recur_count : Recursion level for the stack overflow test. Default is 10.
-
-  cpoint_name : Crash point where the kernel is to be crashed. It can be
-	 one of INT_HARDWARE_ENTRY, INT_HW_IRQ_EN, INT_TASKLET_ENTRY,
-	 FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_DISPATCH_CMD,
-	 IDE_CORE_CP, DIRECT
-
-  cpoint_type : Indicates the action to be taken on hitting the crash point.
-     It can be one of PANIC, BUG, EXCEPTION, LOOP, OVERFLOW,
-     CORRUPT_STACK, UNALIGNED_LOAD_STORE_WRITE, OVERWRITE_ALLOCATION,
-     WRITE_AFTER_FREE,
-
-  cpoint_count : Indicates the number of times the crash point is to be hit
-    to trigger an action. The default is 10.
-
-You can also induce failures by mounting debugfs and writing the type to
-<mountpoint>/provoke-crash/<crashpoint>. E.g.,
-
-  mount -t debugfs debugfs /mnt
-  echo EXCEPTION > /mnt/provoke-crash/INT_HARDWARE_ENTRY
-
-
-A special file is `DIRECT' which will induce the crash directly without
-KPROBE instrumentation. This mode is the only one available when the module
-is built on a kernel without KPROBEs support.
diff --git a/Documentation/process/4.Coding.rst b/Documentation/process/4.Coding.rst
index 4b7a5ab3cec1..13dd893c9f88 100644
--- a/Documentation/process/4.Coding.rst
+++ b/Documentation/process/4.Coding.rst
@@ -298,7 +298,7 @@ enabled, a configurable percentage of memory allocations will be made to
 fail; these failures can be restricted to a specific range of code.
 Running with fault injection enabled allows the programmer to see how the
 code responds when things go badly.  See
-Documentation/fault-injection/fault-injection.txt for more information on
+Documentation/fault-injection/fault-injection.rst for more information on
 how to use this facility.
 
 Other kinds of errors can be found with the "sparse" static analysis tool.
diff --git a/Documentation/translations/it_IT/process/4.Coding.rst b/Documentation/translations/it_IT/process/4.Coding.rst
index c05b89e616dd..a5e36aa60448 100644
--- a/Documentation/translations/it_IT/process/4.Coding.rst
+++ b/Documentation/translations/it_IT/process/4.Coding.rst
@@ -314,7 +314,7 @@ di allocazione di memoria sarà destinata al fallimento; questi fallimenti
 possono essere ridotti ad uno specifico pezzo di codice.  Procedere con
 l'inserimento dei fallimenti attivo permette al programmatore di verificare
 come il codice risponde quando le cose vanno male.  Consultate:
-Documentation/fault-injection/fault-injection.txt per avere maggiori
+Documentation/fault-injection/fault-injection.rst per avere maggiori
 informazioni su come utilizzare questo strumento.
 
 Altre tipologie di errori possono essere riscontrati con lo strumento di
diff --git a/Documentation/translations/zh_CN/process/4.Coding.rst b/Documentation/translations/zh_CN/process/4.Coding.rst
index 5301e9d55255..b8b6d4c8ef3c 100644
--- a/Documentation/translations/zh_CN/process/4.Coding.rst
+++ b/Documentation/translations/zh_CN/process/4.Coding.rst
@@ -205,7 +205,7 @@ Linus对这个问题给出了最佳答案:
 启用故障注入后,内存分配的可配置百分比将失败;这些失败可以限制在特定的代码
 范围内。在启用了故障注入的情况下运行,程序员可以看到当情况恶化时代码如何响
 应。有关如何使用此工具的详细信息,请参阅
-Documentation/fault-injection/fault-injection.txt。
+Documentation/fault-injection/fault-injection.rst。
 
 使用“sparse”静态分析工具可以发现其他类型的错误。对于sparse,可以警告程序员
 用户空间和内核空间地址之间的混淆、big endian和small endian数量的混合、在需
diff --git a/drivers/misc/lkdtm/core.c b/drivers/misc/lkdtm/core.c
index b51cf182b031..9c2f335b7023 100644
--- a/drivers/misc/lkdtm/core.c
+++ b/drivers/misc/lkdtm/core.c
@@ -28,7 +28,7 @@
  *
  * Debugfs support added by Simon Kagstrom <simon.kagstrom@netinsight.net>
  *
- * See Documentation/fault-injection/provoke-crashes.txt for instructions
+ * See Documentation/fault-injection/provoke-crashes.rst for instructions
  */
 #include "lkdtm.h"
 #include <linux/fs.h>
diff --git a/include/linux/fault-inject.h b/include/linux/fault-inject.h
index 7e6c77740413..e525f6957c49 100644
--- a/include/linux/fault-inject.h
+++ b/include/linux/fault-inject.h
@@ -11,7 +11,7 @@
 
 /*
  * For explanation of the elements of this struct, see
- * Documentation/fault-injection/fault-injection.txt
+ * Documentation/fault-injection/fault-injection.rst
  */
 struct fault_attr {
 	unsigned long probability;
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 3a9d41bd4d45..1b0129196e70 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1681,7 +1681,7 @@ config LKDTM
 	called lkdtm.
 
 	Documentation on how to use the module can be found in
-	Documentation/fault-injection/provoke-crashes.txt
+	Documentation/fault-injection/provoke-crashes.rst
 
 config TEST_LIST_SORT
 	tristate "Linked list sorting test"
diff --git a/tools/testing/fault-injection/failcmd.sh b/tools/testing/fault-injection/failcmd.sh
index 29a6c63c5a15..78dac34264be 100644
--- a/tools/testing/fault-injection/failcmd.sh
+++ b/tools/testing/fault-injection/failcmd.sh
@@ -42,7 +42,7 @@ OPTIONS
 	--interval=value, --space=value, --verbose=value, --task-filter=value,
 	--stacktrace-depth=value, --require-start=value, --require-end=value,
 	--reject-start=value, --reject-end=value, --ignore-gfp-wait=value
-		See Documentation/fault-injection/fault-injection.txt for more
+		See Documentation/fault-injection/fault-injection.rst for more
 		information
 
 	failslab options:
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 13/79] docs: fb: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (11 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 12/79] docs: fault-injection: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-05-06 13:40     ` Bartlomiej Zolnierkiewicz
  2019-04-22 13:27   ` [PATCH v2 14/79] docs: fpga: " Mauro Carvalho Chehab
                     ` (64 subsequent siblings)
  77 siblings, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Bartlomiej Zolnierkiewicz, Maik Broemme,
	Thomas Winischhofer, Sudip Mukherjee, Teddy Wang,
	Bernie Thompson, Michal Januszewski, Greg Kroah-Hartman,
	Jiri Slaby, dri-devel, linux-fbdev

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../admin-guide/kernel-parameters.txt         |   2 +-
 Documentation/fb/{api.txt => api.rst}         |  29 +-
 Documentation/fb/{arkfb.txt => arkfb.rst}     |   8 +-
 .../fb/{aty128fb.txt => aty128fb.rst}         |  35 +-
 .../fb/{cirrusfb.txt => cirrusfb.rst}         |  47 +-
 .../fb/{cmap_xfbdev.txt => cmap_xfbdev.rst}   |  57 +--
 .../fb/{deferred_io.txt => deferred_io.rst}   |  28 +-
 Documentation/fb/{efifb.txt => efifb.rst}     |  18 +-
 .../fb/{ep93xx-fb.txt => ep93xx-fb.rst}       |  27 +-
 Documentation/fb/{fbcon.txt => fbcon.rst}     | 177 +++----
 .../fb/{framebuffer.txt => framebuffer.rst}   |  79 ++--
 Documentation/fb/{gxfb.txt => gxfb.rst}       |  24 +-
 Documentation/fb/index.rst                    |  50 ++
 .../fb/{intel810.txt => intel810.rst}         |  79 ++--
 Documentation/fb/{intelfb.txt => intelfb.rst} |  62 +--
 .../fb/{internals.txt => internals.rst}       |  24 +-
 Documentation/fb/{lxfb.txt => lxfb.rst}       |  25 +-
 Documentation/fb/matroxfb.rst                 | 443 ++++++++++++++++++
 Documentation/fb/matroxfb.txt                 | 413 ----------------
 .../fb/{metronomefb.txt => metronomefb.rst}   |   8 +-
 Documentation/fb/{modedb.txt => modedb.rst}   |  44 +-
 Documentation/fb/pvr2fb.rst                   |  66 +++
 Documentation/fb/pvr2fb.txt                   |  65 ---
 Documentation/fb/{pxafb.txt => pxafb.rst}     |  81 +++-
 Documentation/fb/{s3fb.txt => s3fb.rst}       |   8 +-
 .../fb/{sa1100fb.txt => sa1100fb.rst}         |  23 +-
 Documentation/fb/sh7760fb.rst                 | 130 +++++
 Documentation/fb/sh7760fb.txt                 | 131 ------
 Documentation/fb/{sisfb.txt => sisfb.rst}     |  40 +-
 Documentation/fb/{sm501.txt => sm501.rst}     |   7 +-
 Documentation/fb/{sm712fb.txt => sm712fb.rst} |  18 +-
 Documentation/fb/sstfb.rst                    | 207 ++++++++
 Documentation/fb/sstfb.txt                    | 174 -------
 Documentation/fb/{tgafb.txt => tgafb.rst}     |  30 +-
 .../fb/{tridentfb.txt => tridentfb.rst}       |  36 +-
 Documentation/fb/{udlfb.txt => udlfb.rst}     |  55 ++-
 Documentation/fb/{uvesafb.txt => uvesafb.rst} | 128 ++---
 Documentation/fb/{vesafb.txt => vesafb.rst}   | 121 ++---
 Documentation/fb/viafb.rst                    | 297 ++++++++++++
 Documentation/fb/viafb.txt                    | 252 ----------
 .../fb/{vt8623fb.txt => vt8623fb.rst}         |  10 +-
 MAINTAINERS                                   |  10 +-
 drivers/tty/Kconfig                           |   2 +-
 drivers/video/fbdev/Kconfig                   |  24 +-
 drivers/video/fbdev/matrox/matroxfb_base.c    |   2 +-
 drivers/video/fbdev/pxafb.c                   |   2 +-
 drivers/video/fbdev/sh7760fb.c                |   2 +-
 47 files changed, 1944 insertions(+), 1656 deletions(-)
 rename Documentation/fb/{api.txt => api.rst} (97%)
 rename Documentation/fb/{arkfb.txt => arkfb.rst} (92%)
 rename Documentation/fb/{aty128fb.txt => aty128fb.rst} (61%)
 rename Documentation/fb/{cirrusfb.txt => cirrusfb.rst} (75%)
 rename Documentation/fb/{cmap_xfbdev.txt => cmap_xfbdev.rst} (50%)
 rename Documentation/fb/{deferred_io.txt => deferred_io.rst} (86%)
 rename Documentation/fb/{efifb.txt => efifb.rst} (75%)
 rename Documentation/fb/{ep93xx-fb.txt => ep93xx-fb.rst} (85%)
 rename Documentation/fb/{fbcon.txt => fbcon.rst} (69%)
 rename Documentation/fb/{framebuffer.txt => framebuffer.rst} (92%)
 rename Documentation/fb/{gxfb.txt => gxfb.rst} (60%)
 create mode 100644 Documentation/fb/index.rst
 rename Documentation/fb/{intel810.txt => intel810.rst} (83%)
 rename Documentation/fb/{intelfb.txt => intelfb.rst} (73%)
 rename Documentation/fb/{internals.txt => internals.rst} (82%)
 rename Documentation/fb/{lxfb.txt => lxfb.rst} (60%)
 create mode 100644 Documentation/fb/matroxfb.rst
 delete mode 100644 Documentation/fb/matroxfb.txt
 rename Documentation/fb/{metronomefb.txt => metronomefb.rst} (98%)
 rename Documentation/fb/{modedb.txt => modedb.rst} (87%)
 create mode 100644 Documentation/fb/pvr2fb.rst
 delete mode 100644 Documentation/fb/pvr2fb.txt
 rename Documentation/fb/{pxafb.txt => pxafb.rst} (78%)
 rename Documentation/fb/{s3fb.txt => s3fb.rst} (94%)
 rename Documentation/fb/{sa1100fb.txt => sa1100fb.rst} (64%)
 create mode 100644 Documentation/fb/sh7760fb.rst
 delete mode 100644 Documentation/fb/sh7760fb.txt
 rename Documentation/fb/{sisfb.txt => sisfb.rst} (85%)
 rename Documentation/fb/{sm501.txt => sm501.rst} (65%)
 rename Documentation/fb/{sm712fb.txt => sm712fb.rst} (59%)
 create mode 100644 Documentation/fb/sstfb.rst
 delete mode 100644 Documentation/fb/sstfb.txt
 rename Documentation/fb/{tgafb.txt => tgafb.rst} (71%)
 rename Documentation/fb/{tridentfb.txt => tridentfb.rst} (70%)
 rename Documentation/fb/{udlfb.txt => udlfb.rst} (77%)
 rename Documentation/fb/{uvesafb.txt => uvesafb.rst} (52%)
 rename Documentation/fb/{vesafb.txt => vesafb.rst} (57%)
 create mode 100644 Documentation/fb/viafb.rst
 delete mode 100644 Documentation/fb/viafb.txt
 rename Documentation/fb/{vt8623fb.txt => vt8623fb.rst} (85%)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 0376e7e7dfa3..fce382aebf60 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4958,7 +4958,7 @@
 			vector=percpu: enable percpu vector domain
 
 	video=		[FB] Frame buffer configuration
-			See Documentation/fb/modedb.txt.
+			See Documentation/fb/modedb.rst.
 
 	video.brightness_switch_enabled= [0,1]
 			If set to 1, on receiving an ACPI notify event
diff --git a/Documentation/fb/api.txt b/Documentation/fb/api.rst
similarity index 97%
rename from Documentation/fb/api.txt
rename to Documentation/fb/api.rst
index d52cf1e3b975..79ec33dded74 100644
--- a/Documentation/fb/api.txt
+++ b/Documentation/fb/api.rst
@@ -1,5 +1,6 @@
-			The Frame Buffer Device API
-			---------------------------
+===========================
+The Frame Buffer Device API
+===========================
 
 Last revised: June 21, 2011
 
@@ -21,13 +22,13 @@ deal with different behaviours.
 ---------------
 
 Device and driver capabilities are reported in the fixed screen information
-capabilities field.
+capabilities field::
 
-struct fb_fix_screeninfo {
+  struct fb_fix_screeninfo {
 	...
 	__u16 capabilities;		/* see FB_CAP_*			*/
 	...
-};
+  };
 
 Application should use those capabilities to find out what features they can
 expect from the device and driver.
@@ -151,9 +152,9 @@ fb_fix_screeninfo and fb_var_screeninfo structure respectively.
 struct fb_fix_screeninfo stores device independent unchangeable information
 about the frame buffer device and the current format. Those information can't
 be directly modified by applications, but can be changed by the driver when an
-application modifies the format.
+application modifies the format::
 
-struct fb_fix_screeninfo {
+  struct fb_fix_screeninfo {
 	char id[16];			/* identification string eg "TT Builtin" */
 	unsigned long smem_start;	/* Start of frame buffer mem */
 					/* (physical address) */
@@ -172,13 +173,13 @@ struct fb_fix_screeninfo {
 					/*  specific chip/card we have	*/
 	__u16 capabilities;		/* see FB_CAP_*			*/
 	__u16 reserved[2];		/* Reserved for future compatibility */
-};
+  };
 
 struct fb_var_screeninfo stores device independent changeable information
 about a frame buffer device, its current format and video mode, as well as
-other miscellaneous parameters.
+other miscellaneous parameters::
 
-struct fb_var_screeninfo {
+  struct fb_var_screeninfo {
 	__u32 xres;			/* visible resolution		*/
 	__u32 yres;
 	__u32 xres_virtual;		/* virtual resolution		*/
@@ -216,7 +217,7 @@ struct fb_var_screeninfo {
 	__u32 rotate;			/* angle we rotate counter clockwise */
 	__u32 colorspace;		/* colorspace for FOURCC-based modes */
 	__u32 reserved[4];		/* Reserved for future compatibility */
-};
+  };
 
 To modify variable information, applications call the FBIOPUT_VSCREENINFO
 ioctl with a pointer to a fb_var_screeninfo structure. If the call is
@@ -255,14 +256,14 @@ monochrome, grayscale or pseudocolor visuals, although this is not required.
 
 - For truecolor and directcolor formats, applications set the grayscale field
   to zero, and the red, blue, green and transp fields to describe the layout of
-  color components in memory.
+  color components in memory::
 
-struct fb_bitfield {
+    struct fb_bitfield {
 	__u32 offset;			/* beginning of bitfield	*/
 	__u32 length;			/* length of bitfield		*/
 	__u32 msb_right;		/* != 0 : Most significant bit is */
 					/* right */
-};
+    };
 
   Pixel values are bits_per_pixel wide and are split in non-overlapping red,
   green, blue and alpha (transparency) components. Location and size of each
diff --git a/Documentation/fb/arkfb.txt b/Documentation/fb/arkfb.rst
similarity index 92%
rename from Documentation/fb/arkfb.txt
rename to Documentation/fb/arkfb.rst
index e8487a9d6a05..aeca8773dd7e 100644
--- a/Documentation/fb/arkfb.txt
+++ b/Documentation/fb/arkfb.rst
@@ -1,6 +1,6 @@
-
-	arkfb - fbdev driver for ARK Logic chips
-	========================================
+========================================
+arkfb - fbdev driver for ARK Logic chips
+========================================
 
 
 Supported Hardware
@@ -47,7 +47,7 @@ Missing Features
 (alias TODO list)
 
 	* secondary (not initialized by BIOS) device support
-   	* big endian support
+	* big endian support
 	* DPMS support
 	* MMIO support
 	* interlaced mode variant
diff --git a/Documentation/fb/aty128fb.txt b/Documentation/fb/aty128fb.rst
similarity index 61%
rename from Documentation/fb/aty128fb.txt
rename to Documentation/fb/aty128fb.rst
index b605204fcfe1..3f107718f933 100644
--- a/Documentation/fb/aty128fb.txt
+++ b/Documentation/fb/aty128fb.rst
@@ -1,8 +1,9 @@
-[This file is cloned from VesaFB/matroxfb]
-
+=================
 What is aty128fb?
 =================
 
+.. [This file is cloned from VesaFB/matroxfb]
+
 This is a driver for a graphic framebuffer for ATI Rage128 based devices
 on Intel and PPC boxes.
 
@@ -24,15 +25,15 @@ How to use it?
 ==============
 
 Switching modes is done using the  video=aty128fb:<resolution>... modedb
-boot parameter or using `fbset' program.
+boot parameter or using `fbset` program.
 
-See Documentation/fb/modedb.txt for more information on modedb
+See Documentation/fb/modedb.rst for more information on modedb
 resolutions.
 
 You should compile in both vgacon (to boot if you remove your Rage128 from
 box) and aty128fb (for graphics mode). You should not compile-in vesafb
-unless you have primary display on non-Rage128 VBE2.0 device (see 
-Documentation/fb/vesafb.txt for details).
+unless you have primary display on non-Rage128 VBE2.0 device (see
+Documentation/fb/vesafb.rst for details).
 
 
 X11
@@ -48,16 +49,18 @@ Configuration
 =============
 
 You can pass kernel command line options to vesafb with
-`video=aty128fb:option1,option2:value2,option3' (multiple options should
-be separated by comma, values are separated from options by `:'). 
+`video=aty128fb:option1,option2:value2,option3` (multiple options should
+be separated by comma, values are separated from options by `:`).
 Accepted options:
 
-noaccel  - do not use acceleration engine. It is default.
-accel    - use acceleration engine. Not finished.
-vmode:x  - chooses PowerMacintosh video mode <x>. Deprecated.
-cmode:x  - chooses PowerMacintosh colour mode <x>. Deprecated.
-<XxX@X>  - selects startup videomode. See modedb.txt for detailed
-	   explanation. Default is 640x480x8bpp.
+========= =======================================================
+noaccel   do not use acceleration engine. It is default.
+accel     use acceleration engine. Not finished.
+vmode:x   chooses PowerMacintosh video mode <x>. Deprecated.
+cmode:x   chooses PowerMacintosh colour mode <x>. Deprecated.
+<XxX@X>   selects startup videomode. See modedb.txt for detailed
+	  explanation. Default is 640x480x8bpp.
+========= =======================================================
 
 
 Limitations
@@ -65,8 +68,8 @@ Limitations
 
 There are known and unknown bugs, features and misfeatures.
 Currently there are following known bugs:
- + This driver is still experimental and is not finished.  Too many
+
+ - This driver is still experimental and is not finished.  Too many
    bugs/errata to list here.
 
---
 Brad Douglas <brad@neruo.com>
diff --git a/Documentation/fb/cirrusfb.txt b/Documentation/fb/cirrusfb.rst
similarity index 75%
rename from Documentation/fb/cirrusfb.txt
rename to Documentation/fb/cirrusfb.rst
index f75950d330a4..8c3e6c6cb114 100644
--- a/Documentation/fb/cirrusfb.txt
+++ b/Documentation/fb/cirrusfb.rst
@@ -1,32 +1,32 @@
+============================================
+Framebuffer driver for Cirrus Logic chipsets
+============================================
 
-		Framebuffer driver for Cirrus Logic chipsets
-		Copyright 1999 Jeff Garzik <jgarzik@pobox.com>
+Copyright 1999 Jeff Garzik <jgarzik@pobox.com>
 
 
-
-{ just a little something to get people going; contributors welcome! }
-
+.. just a little something to get people going; contributors welcome!
 
 
 Chip families supported:
-	SD64
-	Piccolo
-	Picasso
-	Spectrum
-	Alpine (GD-543x/4x)
-	Picasso4 (GD-5446)
-	GD-5480
-	Laguna (GD-546x)
+	- SD64
+	- Piccolo
+	- Picasso
+	- Spectrum
+	- Alpine (GD-543x/4x)
+	- Picasso4 (GD-5446)
+	- GD-5480
+	- Laguna (GD-546x)
 
 Bus's supported:
-	PCI
-	Zorro
+	- PCI
+	- Zorro
 
 Architectures supported:
-	i386
-	Alpha
-	PPC (Motorola Powerstack)
-	m68k (Amiga)
+	- i386
+	- Alpha
+	- PPC (Motorola Powerstack)
+	- m68k (Amiga)
 
 
 
@@ -34,10 +34,9 @@ Default video modes
 -------------------
 At the moment, there are two kernel command line arguments supported:
 
-mode:640x480
-mode:800x600
-	or
-mode:1024x768
+- mode:640x480
+- mode:800x600
+- mode:1024x768
 
 Full support for startup video modes (modedb) will be integrated soon.
 
@@ -93,5 +92,3 @@ Version 1.9.4
 Version 1.9.3
 -------------
 * Bundled with kernel 2.3.14-pre1 or later.
-
-
diff --git a/Documentation/fb/cmap_xfbdev.txt b/Documentation/fb/cmap_xfbdev.rst
similarity index 50%
rename from Documentation/fb/cmap_xfbdev.txt
rename to Documentation/fb/cmap_xfbdev.rst
index 55e1f0a3d2b4..5db5e9787361 100644
--- a/Documentation/fb/cmap_xfbdev.txt
+++ b/Documentation/fb/cmap_xfbdev.rst
@@ -1,26 +1,29 @@
+==========================
 Understanding fbdev's cmap
---------------------------
+==========================
 
 These notes explain how X's dix layer uses fbdev's cmap structures.
 
-*. example of relevant structures in fbdev as used for a 3-bit grayscale cmap
-struct fb_var_screeninfo {
-        .bits_per_pixel = 8,
-        .grayscale      = 1,
-        .red =          { 4, 3, 0 },
-        .green =        { 0, 0, 0 },
-        .blue =         { 0, 0, 0 },
-}
-struct fb_fix_screeninfo {
-        .visual =       FB_VISUAL_STATIC_PSEUDOCOLOR,
-}
-for (i = 0; i < 8; i++)
+-  example of relevant structures in fbdev as used for a 3-bit grayscale cmap::
+
+    struct fb_var_screeninfo {
+	    .bits_per_pixel = 8,
+	    .grayscale      = 1,
+	    .red =          { 4, 3, 0 },
+	    .green =        { 0, 0, 0 },
+	    .blue =         { 0, 0, 0 },
+    }
+    struct fb_fix_screeninfo {
+	    .visual =       FB_VISUAL_STATIC_PSEUDOCOLOR,
+    }
+    for (i = 0; i < 8; i++)
 	info->cmap.red[i] = (((2*i)+1)*(0xFFFF))/16;
-memcpy(info->cmap.green, info->cmap.red, sizeof(u16)*8);
-memcpy(info->cmap.blue, info->cmap.red, sizeof(u16)*8);
+    memcpy(info->cmap.green, info->cmap.red, sizeof(u16)*8);
+    memcpy(info->cmap.blue, info->cmap.red, sizeof(u16)*8);
 
-*. X11 apps do something like the following when trying to use grayscale.
-for (i=0; i < 8; i++) {
+-  X11 apps do something like the following when trying to use grayscale::
+
+    for (i=0; i < 8; i++) {
 	char colorspec[64];
 	memset(colorspec,0,64);
 	sprintf(colorspec, "rgb:%x/%x/%x", i*36,i*36,i*36);
@@ -28,26 +31,26 @@ for (i=0; i < 8; i++) {
 		printf("Can't get color %s\n",colorspec);
 	XAllocColor(outputDisplay, testColormap, &wantedColor);
 	grays[i] = wantedColor;
-}
+    }
+
 There's also named equivalents like gray1..x provided you have an rgb.txt.
 
 Somewhere in X's callchain, this results in a call to X code that handles the
 colormap. For example, Xfbdev hits the following:
 
-xc-011010/programs/Xserver/dix/colormap.c:
+xc-011010/programs/Xserver/dix/colormap.c::
 
-FindBestPixel(pentFirst, size, prgb, channel)
+  FindBestPixel(pentFirst, size, prgb, channel)
 
-dr = (long) pent->co.local.red - prgb->red;
-dg = (long) pent->co.local.green - prgb->green;
-db = (long) pent->co.local.blue - prgb->blue;
-sq = dr * dr;
-UnsignedToBigNum (sq, &sum);
-BigNumAdd (&sum, &temp, &sum);
+  dr = (long) pent->co.local.red - prgb->red;
+  dg = (long) pent->co.local.green - prgb->green;
+  db = (long) pent->co.local.blue - prgb->blue;
+  sq = dr * dr;
+  UnsignedToBigNum (sq, &sum);
+  BigNumAdd (&sum, &temp, &sum);
 
 co.local.red are entries that were brought in through FBIOGETCMAP which come
 directly from the info->cmap.red that was listed above. The prgb is the rgb
 that the app wants to match to. The above code is doing what looks like a least
 squares matching function. That's why the cmap entries can't be set to the left
 hand side boundaries of a color range.
-
diff --git a/Documentation/fb/deferred_io.txt b/Documentation/fb/deferred_io.rst
similarity index 86%
rename from Documentation/fb/deferred_io.txt
rename to Documentation/fb/deferred_io.rst
index 748328370250..7300cff255a3 100644
--- a/Documentation/fb/deferred_io.txt
+++ b/Documentation/fb/deferred_io.rst
@@ -1,5 +1,6 @@
+===========
 Deferred IO
------------
+===========
 
 Deferred IO is a way to delay and repurpose IO. It uses host memory as a
 buffer and the MMU pagefault as a pretrigger for when to perform the device
@@ -16,7 +17,7 @@ works:
 - app continues writing to that page with no additional cost. this is
   the key benefit.
 - the workqueue task comes in and mkcleans the pages on the list, then
- completes the work associated with updating the framebuffer. this is
+  completes the work associated with updating the framebuffer. this is
   the real work talking to the device.
 - app tries to write to the address (that has now been mkcleaned)
 - get pagefault and the above sequence occurs again
@@ -47,29 +48,32 @@ How to use it: (for fbdev drivers)
 ----------------------------------
 The following example may be helpful.
 
-1. Setup your structure. Eg:
+1. Setup your structure. Eg::
 
-static struct fb_deferred_io hecubafb_defio = {
-	.delay		= HZ,
-	.deferred_io	= hecubafb_dpy_deferred_io,
-};
+	static struct fb_deferred_io hecubafb_defio = {
+		.delay		= HZ,
+		.deferred_io	= hecubafb_dpy_deferred_io,
+	};
 
 The delay is the minimum delay between when the page_mkwrite trigger occurs
 and when the deferred_io callback is called. The deferred_io callback is
 explained below.
 
-2. Setup your deferred IO callback. Eg:
-static void hecubafb_dpy_deferred_io(struct fb_info *info,
-				struct list_head *pagelist)
+2. Setup your deferred IO callback. Eg::
+
+	static void hecubafb_dpy_deferred_io(struct fb_info *info,
+					     struct list_head *pagelist)
 
 The deferred_io callback is where you would perform all your IO to the display
 device. You receive the pagelist which is the list of pages that were written
 to during the delay. You must not modify this list. This callback is called
 from a workqueue.
 
-3. Call init
+3. Call init::
+
 	info->fbdefio = &hecubafb_defio;
 	fb_deferred_io_init(info);
 
-4. Call cleanup
+4. Call cleanup::
+
 	fb_deferred_io_cleanup(info);
diff --git a/Documentation/fb/efifb.txt b/Documentation/fb/efifb.rst
similarity index 75%
rename from Documentation/fb/efifb.txt
rename to Documentation/fb/efifb.rst
index 1a85c1bdaf38..04840331a00e 100644
--- a/Documentation/fb/efifb.txt
+++ b/Documentation/fb/efifb.rst
@@ -1,6 +1,6 @@
-
+==============
 What is efifb?
-===============
+==============
 
 This is a generic EFI platform driver for Intel based Apple computers.
 efifb is only for EFI booted Intel Macs.
@@ -8,16 +8,17 @@ efifb is only for EFI booted Intel Macs.
 Supported Hardware
 ==================
 
-iMac 17"/20"
-Macbook
-Macbook Pro 15"/17"
-MacMini
+- iMac 17"/20"
+- Macbook
+- Macbook Pro 15"/17"
+- MacMini
 
 How to use it?
 ==============
 
 efifb does not have any kind of autodetection of your machine.
-You have to add the following kernel parameters in your elilo.conf:
+You have to add the following kernel parameters in your elilo.conf::
+
 	Macbook :
 		video=efifb:macbook
 	MacMini :
@@ -29,9 +30,10 @@ You have to add the following kernel parameters in your elilo.conf:
 
 Accepted options:
 
+======= ===========================================================
 nowc	Don't map the framebuffer write combined. This can be used
 	to workaround side-effects and slowdowns on other CPU cores
 	when large amounts of console data are written.
+======= ===========================================================
 
---
 Edgar Hucek <gimli@dark-green.com>
diff --git a/Documentation/fb/ep93xx-fb.txt b/Documentation/fb/ep93xx-fb.rst
similarity index 85%
rename from Documentation/fb/ep93xx-fb.txt
rename to Documentation/fb/ep93xx-fb.rst
index 5af1bd9effae..6f7767926d1a 100644
--- a/Documentation/fb/ep93xx-fb.txt
+++ b/Documentation/fb/ep93xx-fb.rst
@@ -4,7 +4,7 @@ Driver for EP93xx LCD controller
 
 The EP93xx LCD controller can drive both standard desktop monitors and
 embedded LCD displays. If you have a standard desktop monitor then you
-can use the standard Linux video mode database. In your board file:
+can use the standard Linux video mode database. In your board file::
 
 	static struct ep93xxfb_mach_info some_board_fb_info = {
 		.num_modes	= EP93XXFB_USE_MODEDB,
@@ -12,7 +12,7 @@ can use the standard Linux video mode database. In your board file:
 	};
 
 If you have an embedded LCD display then you need to define a video
-mode for it as follows:
+mode for it as follows::
 
 	static struct fb_videomode some_board_video_modes[] = {
 		{
@@ -23,11 +23,11 @@ mode for it as follows:
 
 Note that the pixel clock value is in pico-seconds. You can use the
 KHZ2PICOS macro to convert the pixel clock value. Most other values
-are in pixel clocks. See Documentation/fb/framebuffer.txt for further
+are in pixel clocks. See Documentation/fb/framebuffer.rst for further
 details.
 
 The ep93xxfb_mach_info structure for your board should look like the
-following:
+following::
 
 	static struct ep93xxfb_mach_info some_board_fb_info = {
 		.num_modes	= ARRAY_SIZE(some_board_video_modes),
@@ -37,7 +37,7 @@ following:
 	};
 
 The framebuffer device can be registered by adding the following to
-your board initialisation function:
+your board initialisation function::
 
 	ep93xx_register_fb(&some_board_fb_info);
 
@@ -50,6 +50,7 @@ to configure the controller. The video attributes flags are fully
 documented in section 7 of the EP93xx users' guide. The following
 flags are available:
 
+=============================== ==========================================
 EP93XXFB_PCLK_FALLING		Clock data on the falling edge of the
 				pixel clock. The default is to clock
 				data on the rising edge.
@@ -62,10 +63,12 @@ EP93XXFB_SYNC_HORIZ_HIGH	Horizontal sync is active high. By
 
 EP93XXFB_SYNC_VERT_HIGH		Vertical sync is active high. By
 				default the vertical sync is active high.
+=============================== ==========================================
 
 The physical address of the framebuffer can be controlled using the
 following flags:
 
+=============================== ======================================
 EP93XXFB_USE_SDCSN0		Use SDCSn[0] for the framebuffer. This
 				is the default setting.
 
@@ -74,6 +77,7 @@ EP93XXFB_USE_SDCSN1		Use SDCSn[1] for the framebuffer.
 EP93XXFB_USE_SDCSN2		Use SDCSn[2] for the framebuffer.
 
 EP93XXFB_USE_SDCSN3		Use SDCSn[3] for the framebuffer.
+=============================== ======================================
 
 ==================
 Platform callbacks
@@ -87,7 +91,7 @@ blanked or unblanked.
 
 The setup and teardown devices pass the platform_device structure as
 an argument. The fb_info and ep93xxfb_mach_info structures can be
-obtained as follows:
+obtained as follows::
 
 	static int some_board_fb_setup(struct platform_device *pdev)
 	{
@@ -101,17 +105,17 @@ obtained as follows:
 Setting the video mode
 ======================
 
-The video mode is set using the following syntax:
+The video mode is set using the following syntax::
 
 	video=XRESxYRES[-BPP][@REFRESH]
 
 If the EP93xx video driver is built-in then the video mode is set on
-the Linux kernel command line, for example:
+the Linux kernel command line, for example::
 
 	video=ep93xx-fb:800x600-16@60
 
 If the EP93xx video driver is built as a module then the video mode is
-set when the module is installed:
+set when the module is installed::
 
 	modprobe ep93xx-fb video=320x240
 
@@ -121,13 +125,14 @@ Screenpage bug
 
 At least on the EP9315 there is a silicon bug which causes bit 27 of
 the VIDSCRNPAGE (framebuffer physical offset) to be tied low. There is
-an unofficial errata for this bug at:
+an unofficial errata for this bug at::
+
 	http://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2
 
 By default the EP93xx framebuffer driver checks if the allocated physical
 address has bit 27 set. If it does, then the memory is freed and an
 error is returned. The check can be disabled by adding the following
-option when loading the driver:
+option when loading the driver::
 
       ep93xx-fb.check_screenpage_bug=0
 
diff --git a/Documentation/fb/fbcon.txt b/Documentation/fb/fbcon.rst
similarity index 69%
rename from Documentation/fb/fbcon.txt
rename to Documentation/fb/fbcon.rst
index 60a5ec04e8f0..cfb9f7c38f18 100644
--- a/Documentation/fb/fbcon.txt
+++ b/Documentation/fb/fbcon.rst
@@ -1,39 +1,41 @@
+=======================
 The Framebuffer Console
 =======================
 
-	The framebuffer console (fbcon), as its name implies, is a text
+The framebuffer console (fbcon), as its name implies, is a text
 console running on top of the framebuffer device. It has the functionality of
 any standard text console driver, such as the VGA console, with the added
 features that can be attributed to the graphical nature of the framebuffer.
 
-	 In the x86 architecture, the framebuffer console is optional, and
+In the x86 architecture, the framebuffer console is optional, and
 some even treat it as a toy. For other architectures, it is the only available
 display device, text or graphical.
 
-	 What are the features of fbcon?  The framebuffer console supports
+What are the features of fbcon?  The framebuffer console supports
 high resolutions, varying font types, display rotation, primitive multihead,
 etc. Theoretically, multi-colored fonts, blending, aliasing, and any feature
 made available by the underlying graphics card are also possible.
 
 A. Configuration
+================
 
-	The framebuffer console can be enabled by using your favorite kernel
+The framebuffer console can be enabled by using your favorite kernel
 configuration tool.  It is under Device Drivers->Graphics Support->Frame
 buffer Devices->Console display driver support->Framebuffer Console Support.
 Select 'y' to compile support statically or 'm' for module support.  The
 module will be fbcon.
 
-	In order for fbcon to activate, at least one framebuffer driver is
+In order for fbcon to activate, at least one framebuffer driver is
 required, so choose from any of the numerous drivers available. For x86
 systems, they almost universally have VGA cards, so vga16fb and vesafb will
 always be available. However, using a chipset-specific driver will give you
 more speed and features, such as the ability to change the video mode
 dynamically.
 
-	To display the penguin logo, choose any logo available in Graphics
+To display the penguin logo, choose any logo available in Graphics
 support->Bootup logo.
 
-	Also, you will need to select at least one compiled-in font, but if
+Also, you will need to select at least one compiled-in font, but if
 you don't do anything, the kernel configuration tool will select one for you,
 usually an 8x16 font.
 
@@ -44,6 +46,7 @@ fortunate to have a driver that does not alter the graphics chip, then you
 will still get a VGA console.
 
 B. Loading
+==========
 
 Possible scenarios:
 
@@ -72,33 +75,33 @@ Possible scenarios:
 
 C. Boot options
 
-         The framebuffer console has several, largely unknown, boot options
-         that can change its behavior.
+	 The framebuffer console has several, largely unknown, boot options
+	 that can change its behavior.
 
 1. fbcon=font:<name>
 
-        Select the initial font to use. The value 'name' can be any of the
-        compiled-in fonts: 10x18, 6x10, 7x14, Acorn8x8, MINI4x6,
-        PEARL8x8, ProFont6x11, SUN12x22, SUN8x16, VGA8x16, VGA8x8.
+	Select the initial font to use. The value 'name' can be any of the
+	compiled-in fonts: 10x18, 6x10, 7x14, Acorn8x8, MINI4x6,
+	PEARL8x8, ProFont6x11, SUN12x22, SUN8x16, VGA8x16, VGA8x8.
 
 	Note, not all drivers can handle font with widths not divisible by 8,
-        such as vga16fb.
+	such as vga16fb.
 
 2. fbcon=scrollback:<value>[k]
 
-        The scrollback buffer is memory that is used to preserve display
-        contents that has already scrolled past your view.  This is accessed
-        by using the Shift-PageUp key combination.  The value 'value' is any
-        integer. It defaults to 32KB.  The 'k' suffix is optional, and will
-        multiply the 'value' by 1024.
+	The scrollback buffer is memory that is used to preserve display
+	contents that has already scrolled past your view.  This is accessed
+	by using the Shift-PageUp key combination.  The value 'value' is any
+	integer. It defaults to 32KB.  The 'k' suffix is optional, and will
+	multiply the 'value' by 1024.
 
 3. fbcon=map:<0123>
 
-        This is an interesting option. It tells which driver gets mapped to
-        which console. The value '0123' is a sequence that gets repeated until
-        the total length is 64 which is the number of consoles available. In
-        the above example, it is expanded to 012301230123... and the mapping
-        will be:
+	This is an interesting option. It tells which driver gets mapped to
+	which console. The value '0123' is a sequence that gets repeated until
+	the total length is 64 which is the number of consoles available. In
+	the above example, it is expanded to 012301230123... and the mapping
+	will be::
 
 		tty | 1 2 3 4 5 6 7 8 9 ...
 		fb  | 0 1 2 3 0 1 2 3 0 ...
@@ -126,20 +129,20 @@ C. Boot options
 
 4. fbcon=rotate:<n>
 
-        This option changes the orientation angle of the console display. The
-        value 'n' accepts the following:
+	This option changes the orientation angle of the console display. The
+	value 'n' accepts the following:
 
-	      0 - normal orientation (0 degree)
-	      1 - clockwise orientation (90 degrees)
-	      2 - upside down orientation (180 degrees)
-	      3 - counterclockwise orientation (270 degrees)
+	    - 0 - normal orientation (0 degree)
+	    - 1 - clockwise orientation (90 degrees)
+	    - 2 - upside down orientation (180 degrees)
+	    - 3 - counterclockwise orientation (270 degrees)
 
 	The angle can be changed anytime afterwards by 'echoing' the same
 	numbers to any one of the 2 attributes found in
 	/sys/class/graphics/fbcon:
 
-		rotate     - rotate the display of the active console
-		rotate_all - rotate the display of all consoles
+		- rotate     - rotate the display of the active console
+		- rotate_all - rotate the display of all consoles
 
 	Console rotation will only become available if Framebuffer Console
 	Rotation support is compiled in your kernel.
@@ -177,9 +180,9 @@ Before going on to how to attach, detach and unload the framebuffer console, an
 illustration of the dependencies may help.
 
 The console layer, as with most subsystems, needs a driver that interfaces with
-the hardware. Thus, in a VGA console:
+the hardware. Thus, in a VGA console::
 
-console ---> VGA driver ---> hardware.
+	console ---> VGA driver ---> hardware.
 
 Assuming the VGA driver can be unloaded, one must first unbind the VGA driver
 from the console layer before unloading the driver.  The VGA driver cannot be
@@ -187,9 +190,9 @@ unloaded if it is still bound to the console layer. (See
 Documentation/console/console.txt for more information).
 
 This is more complicated in the case of the framebuffer console (fbcon),
-because fbcon is an intermediate layer between the console and the drivers:
+because fbcon is an intermediate layer between the console and the drivers::
 
-console ---> fbcon ---> fbdev drivers ---> hardware
+	console ---> fbcon ---> fbdev drivers ---> hardware
 
 The fbdev drivers cannot be unloaded if bound to fbcon, and fbcon cannot
 be unloaded if it's bound to the console layer.
@@ -204,12 +207,12 @@ So, how do we unbind fbcon from the console? Part of the answer is in
 Documentation/console/console.txt. To summarize:
 
 Echo a value to the bind file that represents the framebuffer console
-driver. So assuming vtcon1 represents fbcon, then:
+driver. So assuming vtcon1 represents fbcon, then::
 
-echo 1 > sys/class/vtconsole/vtcon1/bind - attach framebuffer console to
-                                           console layer
-echo 0 > sys/class/vtconsole/vtcon1/bind - detach framebuffer console from
-                                           console layer
+  echo 1 > sys/class/vtconsole/vtcon1/bind - attach framebuffer console to
+					     console layer
+  echo 0 > sys/class/vtconsole/vtcon1/bind - detach framebuffer console from
+					     console layer
 
 If fbcon is detached from the console layer, your boot console driver (which is
 usually VGA text mode) will take over.  A few drivers (rivafb and i810fb) will
@@ -223,19 +226,19 @@ restored properly. The following is one of the several methods that you can do:
 2. In your kernel configuration, ensure that CONFIG_FRAMEBUFFER_CONSOLE is set
    to 'y' or 'm'. Enable one or more of your favorite framebuffer drivers.
 
-3. Boot into text mode and as root run:
+3. Boot into text mode and as root run::
 
 	vbetool vbestate save > <vga state file>
 
-	The above command saves the register contents of your graphics
-	hardware to <vga state file>.  You need to do this step only once as
-	the state file can be reused.
+   The above command saves the register contents of your graphics
+   hardware to <vga state file>.  You need to do this step only once as
+   the state file can be reused.
 
-4. If fbcon is compiled as a module, load fbcon by doing:
+4. If fbcon is compiled as a module, load fbcon by doing::
 
        modprobe fbcon
 
-5. Now to detach fbcon:
+5. Now to detach fbcon::
 
        vbetool vbestate restore < <vga state file> && \
        echo 0 > /sys/class/vtconsole/vtcon1/bind
@@ -243,7 +246,7 @@ restored properly. The following is one of the several methods that you can do:
 6. That's it, you're back to VGA mode. And if you compiled fbcon as a module,
    you can unload it by 'rmmod fbcon'.
 
-7. To reattach fbcon:
+7. To reattach fbcon::
 
        echo 1 > /sys/class/vtconsole/vtcon1/bind
 
@@ -266,82 +269,82 @@ the following:
 
 Variation 1:
 
-    a. Before detaching fbcon, do
+    a. Before detaching fbcon, do::
 
-       vbetool vbemode save > <vesa state file> # do once for each vesafb mode,
-						# the file can be reused
+	vbetool vbemode save > <vesa state file> # do once for each vesafb mode,
+						 # the file can be reused
 
     b. Detach fbcon as in step 5.
 
-    c. Attach fbcon
+    c. Attach fbcon::
 
-        vbetool vbestate restore < <vesa state file> && \
+	vbetool vbestate restore < <vesa state file> && \
 	echo 1 > /sys/class/vtconsole/vtcon1/bind
 
 Variation 2:
 
-    a. Before detaching fbcon, do:
+    a. Before detaching fbcon, do::
+
 	echo <ID> > /sys/class/tty/console/bind
 
-
-       vbetool vbemode get
+	vbetool vbemode get
 
     b. Take note of the mode number
 
     b. Detach fbcon as in step 5.
 
-    c. Attach fbcon:
+    c. Attach fbcon::
 
-       vbetool vbemode set <mode number> && \
-       echo 1 > /sys/class/vtconsole/vtcon1/bind
+	vbetool vbemode set <mode number> && \
+	echo 1 > /sys/class/vtconsole/vtcon1/bind
 
 Samples:
 ========
 
 Here are 2 sample bash scripts that you can use to bind or unbind the
-framebuffer console driver if you are on an X86 box:
+framebuffer console driver if you are on an X86 box::
 
----------------------------------------------------------------------------
-#!/bin/bash
-# Unbind fbcon
+  #!/bin/bash
+  # Unbind fbcon
 
-# Change this to where your actual vgastate file is located
-# Or Use VGASTATE=$1 to indicate the state file at runtime
-VGASTATE=/tmp/vgastate
+  # Change this to where your actual vgastate file is located
+  # Or Use VGASTATE=$1 to indicate the state file at runtime
+  VGASTATE=/tmp/vgastate
 
-# path to vbetool
-VBETOOL=/usr/local/bin
+  # path to vbetool
+  VBETOOL=/usr/local/bin
 
 
-for (( i = 0; i < 16; i++))
-do
-  if test -x /sys/class/vtconsole/vtcon$i; then
-      if [ `cat /sys/class/vtconsole/vtcon$i/name | grep -c "frame buffer"` \
-           = 1 ]; then
+  for (( i = 0; i < 16; i++))
+  do
+    if test -x /sys/class/vtconsole/vtcon$i; then
+	if [ `cat /sys/class/vtconsole/vtcon$i/name | grep -c "frame buffer"` \
+	     = 1 ]; then
 	    if test -x $VBETOOL/vbetool; then
 	       echo Unbinding vtcon$i
 	       $VBETOOL/vbetool vbestate restore < $VGASTATE
 	       echo 0 > /sys/class/vtconsole/vtcon$i/bind
 	    fi
-      fi
-  fi
-done
+	fi
+    fi
+  done
 
 ---------------------------------------------------------------------------
-#!/bin/bash
-# Bind fbcon
 
-for (( i = 0; i < 16; i++))
-do
-  if test -x /sys/class/vtconsole/vtcon$i; then
-      if [ `cat /sys/class/vtconsole/vtcon$i/name | grep -c "frame buffer"` \
-           = 1 ]; then
+::
+
+  #!/bin/bash
+  # Bind fbcon
+
+  for (( i = 0; i < 16; i++))
+  do
+    if test -x /sys/class/vtconsole/vtcon$i; then
+	if [ `cat /sys/class/vtconsole/vtcon$i/name | grep -c "frame buffer"` \
+	     = 1 ]; then
 	  echo Unbinding vtcon$i
 	  echo 1 > /sys/class/vtconsole/vtcon$i/bind
-      fi
-  fi
-done
----------------------------------------------------------------------------
+	fi
+    fi
+  done
 
---
 Antonino Daplas <adaplas@pol.net>
diff --git a/Documentation/fb/framebuffer.txt b/Documentation/fb/framebuffer.rst
similarity index 92%
rename from Documentation/fb/framebuffer.txt
rename to Documentation/fb/framebuffer.rst
index 58c5ae2e9f59..b50b8268de92 100644
--- a/Documentation/fb/framebuffer.txt
+++ b/Documentation/fb/framebuffer.rst
@@ -1,5 +1,6 @@
-			The Frame Buffer Device
-			-----------------------
+=======================
+The Frame Buffer Device
+=======================
 
 Maintained by Geert Uytterhoeven <geert@linux-m68k.org>
 Last revised: May 10, 2001
@@ -26,7 +27,7 @@ other device in /dev. It's a character device using major 29; the minor
 specifies the frame buffer number.
 
 By convention, the following device nodes are used (numbers indicate the device
-minor numbers):
+minor numbers)::
 
       0 = /dev/fb0	First frame buffer
       1 = /dev/fb1	Second frame buffer
@@ -34,15 +35,15 @@ minor numbers):
      31 = /dev/fb31	32nd frame buffer
 
 For backwards compatibility, you may want to create the following symbolic
-links:
+links::
 
     /dev/fb0current -> fb0
     /dev/fb1current -> fb1
 
 and so on...
 
-The frame buffer devices are also `normal' memory devices, this means, you can
-read and write their contents. You can, for example, make a screen snapshot by
+The frame buffer devices are also `normal` memory devices, this means, you can
+read and write their contents. You can, for example, make a screen snapshot by::
 
   cp /dev/fb0 myfile
 
@@ -54,11 +55,11 @@ Application software that uses the frame buffer device (e.g. the X server) will
 use /dev/fb0 by default (older software uses /dev/fb0current). You can specify
 an alternative frame buffer device by setting the environment variable
 $FRAMEBUFFER to the path name of a frame buffer device, e.g. (for sh/bash
-users):
+users)::
 
     export FRAMEBUFFER=/dev/fb1
 
-or (for csh users):
+or (for csh users)::
 
     setenv FRAMEBUFFER /dev/fb1
 
@@ -90,9 +91,9 @@ which data structures they work. Here's just a brief overview:
     possible).
 
   - You can get and set parts of the color map. Communication is done with 16
-    bits per color part (red, green, blue, transparency) to support all 
-    existing hardware. The driver does all the computations needed to apply 
-    it to the hardware (round it down to less bits, maybe throw away 
+    bits per color part (red, green, blue, transparency) to support all
+    existing hardware. The driver does all the computations needed to apply
+    it to the hardware (round it down to less bits, maybe throw away
     transparency).
 
 All this hardware abstraction makes the implementation of application programs
@@ -113,10 +114,10 @@ much trouble...
 3. Frame Buffer Resolution Maintenance
 --------------------------------------
 
-Frame buffer resolutions are maintained using the utility `fbset'. It can
+Frame buffer resolutions are maintained using the utility `fbset`. It can
 change the video mode properties of a frame buffer device. Its main usage is
-to change the current video mode, e.g. during boot up in one of your /etc/rc.*
-or /etc/init.d/* files.
+to change the current video mode, e.g. during boot up in one of your `/etc/rc.*`
+or `/etc/init.d/*` files.
 
 Fbset uses a video mode database stored in a configuration file, so you can
 easily add your own modes and refer to them with a simple identifier.
@@ -129,8 +130,8 @@ The X server (XF68_FBDev) is the most notable application program for the frame
 buffer device. Starting with XFree86 release 3.2, the X server is part of
 XFree86 and has 2 modes:
 
-  - If the `Display' subsection for the `fbdev' driver in the /etc/XF86Config
-    file contains a
+  - If the `Display` subsection for the `fbdev` driver in the /etc/XF86Config
+    file contains a::
 
 	Modes "default"
 
@@ -146,7 +147,7 @@ XFree86 and has 2 modes:
     same virtual desktop size. The frame buffer device that's used is still
     /dev/fb0current (or $FRAMEBUFFER), but the available resolutions are
     defined by /etc/XF86Config now. The disadvantage is that you have to
-    specify the timings in a different format (but `fbset -x' may help).
+    specify the timings in a different format (but `fbset -x` may help).
 
 To tune a video mode, you can use fbset or xvidtune. Note that xvidtune doesn't
 work 100% with XF68_FBDev: the reported clock values are always incorrect.
@@ -172,29 +173,29 @@ retrace, the electron beam is turned off (blanked).
 
 The speed at which the electron beam paints the pixels is determined by the
 dotclock in the graphics board. For a dotclock of e.g. 28.37516 MHz (millions
-of cycles per second), each pixel is 35242 ps (picoseconds) long:
+of cycles per second), each pixel is 35242 ps (picoseconds) long::
 
     1/(28.37516E6 Hz) = 35.242E-9 s
 
-If the screen resolution is 640x480, it will take
+If the screen resolution is 640x480, it will take::
 
     640*35.242E-9 s = 22.555E-6 s
 
 to paint the 640 (xres) pixels on one scanline. But the horizontal retrace
-also takes time (e.g. 272 `pixels'), so a full scanline takes
+also takes time (e.g. 272 `pixels`), so a full scanline takes::
 
     (640+272)*35.242E-9 s = 32.141E-6 s
 
-We'll say that the horizontal scanrate is about 31 kHz:
+We'll say that the horizontal scanrate is about 31 kHz::
 
     1/(32.141E-6 s) = 31.113E3 Hz
 
 A full screen counts 480 (yres) lines, but we have to consider the vertical
-retrace too (e.g. 49 `lines'). So a full screen will take
+retrace too (e.g. 49 `lines`). So a full screen will take::
 
     (480+49)*32.141E-6 s = 17.002E-3 s
 
-The vertical scanrate is about 59 Hz:
+The vertical scanrate is about 59 Hz::
 
     1/(17.002E-3 s) = 58.815 Hz
 
@@ -212,7 +213,7 @@ influenced by the moments at which the synchronization pulses occur.
 The following picture summarizes all timings. The horizontal retrace time is
 the sum of the left margin, the right margin and the hsync length, while the
 vertical retrace time is the sum of the upper margin, the lower margin and the
-vsync length.
+vsync length::
 
   +----------+---------------------------------------------+----------+-------+
   |          |                ↑                            |          |       |
@@ -256,7 +257,8 @@ The frame buffer device expects all horizontal timings in number of dotclocks
 6. Converting XFree86 timing values info frame buffer device timings
 --------------------------------------------------------------------
 
-An XFree86 mode line consists of the following fields:
+An XFree86 mode line consists of the following fields::
+
  "800x600"     50      800  856  976 1040    600  637  643  666
  < name >     DCF       HR  SH1  SH2  HFL     VR  SV1  SV2  VFL
 
@@ -271,19 +273,27 @@ The frame buffer device uses the following fields:
   - vsync_len: length of vertical sync
 
 1) Pixelclock:
+
    xfree: in MHz
+
    fb: in picoseconds (ps)
 
    pixclock = 1000000 / DCF
 
 2) horizontal timings:
+
    left_margin = HFL - SH2
+
    right_margin = SH1 - HR
+
    hsync_len = SH2 - SH1
 
 3) vertical timings:
+
    upper_margin = VFL - SV2
+
    lower_margin = SV1 - VR
+
    vsync_len = SV2 - SV1
 
 Good examples for VESA timings can be found in the XFree86 source tree,
@@ -303,9 +313,10 @@ and to the following documentation:
   - The manual pages for fbset: fbset(8), fb.modes(5)
   - The manual pages for XFree86: XF68_FBDev(1), XF86Config(4/5)
   - The mighty kernel sources:
-      o linux/drivers/video/
-      o linux/include/linux/fb.h
-      o linux/include/video/
+
+      - linux/drivers/video/
+      - linux/include/linux/fb.h
+      - linux/include/video/
 
 
 
@@ -330,14 +341,14 @@ and on its mirrors.
 
 The latest version of fbset can be found at
 
-    http://www.linux-fbdev.org/ 
+    http://www.linux-fbdev.org/
+
+
+10. Credits
+-----------
 
-  
-10. Credits                                                       
-----------                                                       
-                
 This readme was written by Geert Uytterhoeven, partly based on the original
-`X-framebuffer.README' by Roman Hodek and Martin Schaller. Section 6 was
+`X-framebuffer.README` by Roman Hodek and Martin Schaller. Section 6 was
 provided by Frank Neumann.
 
 The frame buffer device abstraction was designed by Martin Schaller.
diff --git a/Documentation/fb/gxfb.txt b/Documentation/fb/gxfb.rst
similarity index 60%
rename from Documentation/fb/gxfb.txt
rename to Documentation/fb/gxfb.rst
index 2f640903bbb2..5738709bccbb 100644
--- a/Documentation/fb/gxfb.txt
+++ b/Documentation/fb/gxfb.rst
@@ -1,7 +1,8 @@
-[This file is cloned from VesaFB/aty128fb]
-
+=============
 What is gxfb?
-=================
+=============
+
+.. [This file is cloned from VesaFB/aty128fb]
 
 This is a graphics framebuffer driver for AMD Geode GX2 based processors.
 
@@ -23,9 +24,9 @@ How to use it?
 ==============
 
 Switching modes is done using  gxfb.mode_option=<resolution>... boot
-parameter or using `fbset' program.
+parameter or using `fbset` program.
 
-See Documentation/fb/modedb.txt for more information on modedb
+See Documentation/fb/modedb.rst for more information on modedb
 resolutions.
 
 
@@ -42,11 +43,12 @@ You can pass kernel command line options to gxfb with gxfb.<option>.
 For example, gxfb.mode_option=800x600@75.
 Accepted options:
 
-mode_option	- specify the video mode.  Of the form
-		  <x>x<y>[-<bpp>][@<refresh>]
-vram		- size of video ram (normally auto-detected)
-vt_switch	- enable vt switching during suspend/resume.  The vt
-		  switch is slow, but harmless.
+================ ==================================================
+mode_option	 specify the video mode.  Of the form
+		 <x>x<y>[-<bpp>][@<refresh>]
+vram		 size of video ram (normally auto-detected)
+vt_switch	 enable vt switching during suspend/resume.  The vt
+		 switch is slow, but harmless.
+================ ==================================================
 
---
 Andres Salomon <dilinger@debian.org>
diff --git a/Documentation/fb/index.rst b/Documentation/fb/index.rst
new file mode 100644
index 000000000000..d47313714635
--- /dev/null
+++ b/Documentation/fb/index.rst
@@ -0,0 +1,50 @@
+:orphan:
+
+============
+Frame Buffer
+============
+
+.. toctree::
+    :maxdepth: 1
+
+    api
+    arkfb
+    aty128fb
+    cirrusfb
+    cmap_xfbdev
+    deferred_io
+    efifb
+    ep93xx-fb
+    fbcon
+    framebuffer
+    gxfb
+    intel810
+    intelfb
+    internals
+    lxfb
+    matroxfb
+    metronomefb
+    modedb
+    pvr2fb
+    pxafb
+    s3fb
+    sa1100fb
+    sh7760fb
+    sisfb
+    sm501
+    sm712fb
+    sstfb
+    tgafb
+    tridentfb
+    udlfb
+    uvesafb
+    vesafb
+    viafb
+    vt8623fb
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/fb/intel810.txt b/Documentation/fb/intel810.rst
similarity index 83%
rename from Documentation/fb/intel810.txt
rename to Documentation/fb/intel810.rst
index a8e9f5bca6f3..eb86098db91f 100644
--- a/Documentation/fb/intel810.txt
+++ b/Documentation/fb/intel810.rst
@@ -1,26 +1,31 @@
+================================
 Intel 810/815 Framebuffer driver
- 	Tony Daplas <adaplas@pol.net>
-	http://i810fb.sourceforge.net
+================================
 
-	March 17, 2002
+Tony Daplas <adaplas@pol.net>
 
-	First Released: July 2001
-	Last Update:    September 12, 2005
-================================================================
+http://i810fb.sourceforge.net
+
+March 17, 2002
+
+First Released: July 2001
+Last Update:    September 12, 2005
 
 A. Introduction
+===============
 
 	This is a framebuffer driver for various Intel 810/815 compatible
 	graphics devices.  These include:
 
-	Intel 810
-	Intel 810E
-	Intel 810-DC100
-	Intel 815 Internal graphics only, 100Mhz FSB
-	Intel 815 Internal graphics only
-	Intel 815 Internal graphics and AGP
+	- Intel 810
+	- Intel 810E
+	- Intel 810-DC100
+	- Intel 815 Internal graphics only, 100Mhz FSB
+	- Intel 815 Internal graphics only
+	- Intel 815 Internal graphics and AGP
 
 B.  Features
+============
 
 	- Choice of using Discrete Video Timings, VESA Generalized Timing
 	  Formula, or a framebuffer specific database to set the video mode
@@ -45,10 +50,11 @@ B.  Features
 	- Can concurrently run with xfree86 running with native i810 drivers
 
 	- Hardware Cursor Support
- 
+
 	- Supports EDID probing either by DDC/I2C or through the BIOS
 
 C.  List of available options
+=============================
 
    a. "video=i810fb"
 	enables the i810 driver
@@ -158,7 +164,7 @@ C.  List of available options
 	(default = not set)
 
    n. "dcolor"
-        Use directcolor visual instead of truecolor for pixel depths greater
+	Use directcolor visual instead of truecolor for pixel depths greater
 	than 8 bpp.  Useful for color tuning, such as gamma control.
 
 	Recommendation: do not set
@@ -167,35 +173,37 @@ C.  List of available options
    o. <xres>x<yres>[-<bpp>][@<refresh>]
 	The driver will now accept specification of boot mode option.  If this
 	is specified, the options 'xres' and 'yres' will be ignored. See
-	Documentation/fb/modedb.txt for usage.
+	Documentation/fb/modedb.rst for usage.
 
 D. Kernel booting
+=================
 
 Separate each option/option-pair by commas (,) and the option from its value
-with a colon (:) as in the following:
+with a colon (:) as in the following::
 
-video=i810fb:option1,option2:value2
+	video=i810fb:option1,option2:value2
 
 Sample Usage
 ------------
 
-In /etc/lilo.conf, add the line:
+In /etc/lilo.conf, add the line::
 
-append="video=i810fb:vram:2,xres:1024,yres:768,bpp:8,hsync1:30,hsync2:55, \
-        vsync1:50,vsync2:85,accel,mtrr"
+  append="video=i810fb:vram:2,xres:1024,yres:768,bpp:8,hsync1:30,hsync2:55, \
+	  vsync1:50,vsync2:85,accel,mtrr"
 
 This will initialize the framebuffer to 1024x768 at 8bpp.  The framebuffer
 will use 2 MB of System RAM. MTRR support will be enabled. The refresh rate
 will be computed based on the hsync1/hsync2 and vsync1/vsync2 values.
 
 IMPORTANT:
-You must include hsync1, hsync2, vsync1 and vsync2 to enable video modes
-better than 640x480 at 60Hz. HOWEVER, if your chipset/display combination
-supports I2C and has an EDID block, you can safely exclude hsync1, hsync2,
-vsync1 and vsync2 parameters.  These parameters will be taken from the EDID
-block.
+  You must include hsync1, hsync2, vsync1 and vsync2 to enable video modes
+  better than 640x480 at 60Hz. HOWEVER, if your chipset/display combination
+  supports I2C and has an EDID block, you can safely exclude hsync1, hsync2,
+  vsync1 and vsync2 parameters.  These parameters will be taken from the EDID
+  block.
 
 E.  Module options
+==================
 
 The module parameters are essentially similar to the kernel
 parameters. The main difference is that you need to include a Boolean value
@@ -206,31 +214,32 @@ Example, to enable MTRR, include "mtrr=1".
 Sample Usage
 ------------
 
-Using the same setup as described above, load the module like this:
+Using the same setup as described above, load the module like this::
 
 	modprobe i810fb vram=2 xres=1024 bpp=8 hsync1=30 hsync2=55 vsync1=50 \
-	         vsync2=85 accel=1 mtrr=1
+		 vsync2=85 accel=1 mtrr=1
 
-Or just add the following to a configuration file in /etc/modprobe.d/
+Or just add the following to a configuration file in /etc/modprobe.d/::
 
 	options i810fb vram=2 xres=1024 bpp=16 hsync1=30 hsync2=55 vsync1=50 \
 	vsync2=85 accel=1 mtrr=1
 
-and just do a
+and just do a::
 
 	modprobe i810fb
 
 
 F.  Setup
+=========
 
-	a. Do your usual method of configuring the kernel.
+	a. Do your usual method of configuring the kernel
 
-	make menuconfig/xconfig/config
+	   make menuconfig/xconfig/config
 
 	b. Under "Code maturity level options" enable "Prompt for development
 	   and/or incomplete code/drivers".
 
- 	c. Enable agpgart support for the Intel 810/815 on-board graphics.
+	c. Enable agpgart support for the Intel 810/815 on-board graphics.
 	   This is required.  The option is under "Character Devices".
 
 	d. Under "Graphics Support", select "Intel 810/815" either statically
@@ -242,7 +251,7 @@ F.  Setup
 	   set 'Enable DDC Support' to 'y'. To make this option appear, set
 	   'use VESA Generalized Timing Formula' to 'y'.
 
-        f. If you want a framebuffer console, enable it under "Console
+	f. If you want a framebuffer console, enable it under "Console
 	   Drivers".
 
 	g. Compile your kernel.
@@ -253,6 +262,7 @@ F.  Setup
 	    patch to see the chipset in action (or inaction :-).
 
 G.  Acknowledgment:
+===================
 
 	1.  Geert Uytterhoeven - his excellent howto and the virtual
 	    framebuffer driver code made this possible.
@@ -269,10 +279,9 @@ G.  Acknowledgment:
 	   optimizations possible.
 
 H.  Home Page:
+==============
 
 	A more complete, and probably updated information is provided at
 	http://i810fb.sourceforge.net.
 
-###########################
 Tony
-
diff --git a/Documentation/fb/intelfb.txt b/Documentation/fb/intelfb.rst
similarity index 73%
rename from Documentation/fb/intelfb.txt
rename to Documentation/fb/intelfb.rst
index feac4e4d6968..e2d0903f4efb 100644
--- a/Documentation/fb/intelfb.txt
+++ b/Documentation/fb/intelfb.rst
@@ -1,24 +1,28 @@
+=============================================================
 Intel 830M/845G/852GM/855GM/865G/915G/945G Framebuffer driver
-================================================================
+=============================================================
 
 A. Introduction
-	This is a framebuffer driver for various Intel 8xx/9xx compatible
+===============
+
+This is a framebuffer driver for various Intel 8xx/9xx compatible
 graphics devices.  These would include:
 
-	Intel 830M
-	Intel 845G
-	Intel 852GM
-	Intel 855GM
-	Intel 865G
-	Intel 915G
-	Intel 915GM
-	Intel 945G
-	Intel 945GM
-	Intel 945GME
-	Intel 965G
-	Intel 965GM
+	- Intel 830M
+	- Intel 845G
+	- Intel 852GM
+	- Intel 855GM
+	- Intel 865G
+	- Intel 915G
+	- Intel 915GM
+	- Intel 945G
+	- Intel 945GM
+	- Intel 945GME
+	- Intel 965G
+	- Intel 965GM
 
 B.  List of available options
+=============================
 
    a. "video=intelfb"
 	enables the intelfb driver
@@ -39,12 +43,12 @@ B.  List of available options
 	(default = 4 MB)
 
    d. "voffset=<value>"
-        select at what offset in MB of the logical memory to allocate the
+	select at what offset in MB of the logical memory to allocate the
 	framebuffer memory.  The intent is to avoid the memory blocks
 	used by standard graphics applications (XFree86). Depending on your
-        usage, adjust the value up or down, (0 for maximum usage, 63/127 MB
-        for the least amount).  Note, an arbitrary setting may conflict
-        with XFree86.
+	usage, adjust the value up or down, (0 for maximum usage, 63/127 MB
+	for the least amount).  Note, an arbitrary setting may conflict
+	with XFree86.
 
 	Recommendation: do not set
 	(default = 48 MB)
@@ -80,18 +84,19 @@ B.  List of available options
    The default parameter (not named) is the mode.
 
 C. Kernel booting
+=================
 
 Separate each option/option-pair by commas (,) and the option from its value
-with an equals sign (=) as in the following:
+with an equals sign (=) as in the following::
 
-video=intelfb:option1,option2=value2
+	video=intelfb:option1,option2=value2
 
 Sample Usage
 ------------
 
-In /etc/lilo.conf, add the line:
+In /etc/lilo.conf, add the line::
 
-append="video=intelfb:mode=800x600-32@75,accel,hwcursor,vram=8"
+	append="video=intelfb:mode=800x600-32@75,accel,hwcursor,vram=8"
 
 This will initialize the framebuffer to 800x600 at 32bpp and 75Hz. The
 framebuffer will use 8 MB of System RAM. hw acceleration of text and cursor
@@ -106,8 +111,9 @@ in this directory.
 
 
 D.  Module options
+==================
 
-	The module parameters are essentially similar to the kernel
+The module parameters are essentially similar to the kernel
 parameters. The main difference is that you need to include a Boolean value
 (1 for TRUE, and 0 for FALSE) for those options which don't need a value.
 
@@ -116,23 +122,24 @@ Example, to enable MTRR, include "mtrr=1".
 Sample Usage
 ------------
 
-Using the same setup as described above, load the module like this:
+Using the same setup as described above, load the module like this::
 
 	modprobe intelfb mode=800x600-32@75 vram=8 accel=1 hwcursor=1
 
-Or just add the following to a configuration file in /etc/modprobe.d/
+Or just add the following to a configuration file in /etc/modprobe.d/::
 
 	options intelfb mode=800x600-32@75 vram=8 accel=1 hwcursor=1
 
-and just do a
+and just do a::
 
 	modprobe intelfb
 
 
 E.  Acknowledgment:
+===================
 
 	1.  Geert Uytterhoeven - his excellent howto and the virtual
-                                 framebuffer driver code made this possible.
+	    framebuffer driver code made this possible.
 
 	2.  Jeff Hartmann for his agpgart code.
 
@@ -145,5 +152,4 @@ E.  Acknowledgment:
 
 	6.  Andrew Morton for his kernel patches maintenance.
 
-###########################
 Sylvain
diff --git a/Documentation/fb/internals.txt b/Documentation/fb/internals.rst
similarity index 82%
rename from Documentation/fb/internals.txt
rename to Documentation/fb/internals.rst
index 9b2a2b2f3e57..696b50aa7c24 100644
--- a/Documentation/fb/internals.txt
+++ b/Documentation/fb/internals.rst
@@ -1,13 +1,19 @@
+=============================
+Frame Buffer device internals
+=============================
 
 This is a first start for some documentation about frame buffer device
 internals.
 
-Geert Uytterhoeven <geert@linux-m68k.org>, 21 July 1998
-James Simmons <jsimmons@user.sf.net>, Nov 26 2002
+Authors:
+
+- Geert Uytterhoeven <geert@linux-m68k.org>, 21 July 1998
+- James Simmons <jsimmons@user.sf.net>, Nov 26 2002
 
 --------------------------------------------------------------------------------
 
-	    ***  STRUCTURES USED BY THE FRAME BUFFER DEVICE API  ***
+Structures used by the frame buffer device API
+==============================================
 
 The following structures play a role in the game of frame buffer devices. They
 are defined in <linux/fb.h>.
@@ -40,19 +46,18 @@ are defined in <linux/fb.h>.
     Generic information, API and low level information about a specific frame
     buffer device instance (slot number, board address, ...).
 
-  - struct `par'
+  - struct `par`
 
     Device dependent information that uniquely defines the video mode for this
     particular piece of hardware.
 
 
---------------------------------------------------------------------------------
-
-	    ***  VISUALS USED BY THE FRAME BUFFER DEVICE API  ***
+Visuals used by the frame buffer device API
+===========================================
 
 
 Monochrome (FB_VISUAL_MONO01 and FB_VISUAL_MONO10)
--------------------------------------------------
+--------------------------------------------------
 Each pixel is either black or white.
 
 
@@ -70,7 +75,7 @@ The pixel value is broken up into red, green, and blue fields.
 
 Direct color (FB_VISUAL_DIRECTCOLOR)
 ------------------------------------
-The pixel value is broken up into red, green, and blue fields, each of which 
+The pixel value is broken up into red, green, and blue fields, each of which
 are looked up in separate red, green, and blue lookup tables.
 
 
@@ -79,4 +84,3 @@ Grayscale displays
 Grayscale and static grayscale are special variants of pseudo color and static
 pseudo color, where the red, green and blue components are always equal to
 each other.
-
diff --git a/Documentation/fb/lxfb.txt b/Documentation/fb/lxfb.rst
similarity index 60%
rename from Documentation/fb/lxfb.txt
rename to Documentation/fb/lxfb.rst
index 38b3ca6f6ca7..863e6b98fbae 100644
--- a/Documentation/fb/lxfb.txt
+++ b/Documentation/fb/lxfb.rst
@@ -1,7 +1,9 @@
-[This file is cloned from VesaFB/aty128fb]
-
+=============
 What is lxfb?
-=================
+=============
+
+.. [This file is cloned from VesaFB/aty128fb]
+
 
 This is a graphics framebuffer driver for AMD Geode LX based processors.
 
@@ -23,9 +25,9 @@ How to use it?
 ==============
 
 Switching modes is done using  lxfb.mode_option=<resolution>... boot
-parameter or using `fbset' program.
+parameter or using `fbset` program.
 
-See Documentation/fb/modedb.txt for more information on modedb
+See Documentation/fb/modedb.rst for more information on modedb
 resolutions.
 
 
@@ -42,11 +44,12 @@ You can pass kernel command line options to lxfb with lxfb.<option>.
 For example, lxfb.mode_option=800x600@75.
 Accepted options:
 
-mode_option	- specify the video mode.  Of the form
-		  <x>x<y>[-<bpp>][@<refresh>]
-vram		- size of video ram (normally auto-detected)
-vt_switch	- enable vt switching during suspend/resume.  The vt
-		  switch is slow, but harmless.
+================ ==================================================
+mode_option	 specify the video mode.  Of the form
+		 <x>x<y>[-<bpp>][@<refresh>]
+vram		 size of video ram (normally auto-detected)
+vt_switch	 enable vt switching during suspend/resume.  The vt
+		 switch is slow, but harmless.
+================ ==================================================
 
---
 Andres Salomon <dilinger@debian.org>
diff --git a/Documentation/fb/matroxfb.rst b/Documentation/fb/matroxfb.rst
new file mode 100644
index 000000000000..f1859d98606e
--- /dev/null
+++ b/Documentation/fb/matroxfb.rst
@@ -0,0 +1,443 @@
+=================
+What is matroxfb?
+=================
+
+.. [This file is cloned from VesaFB. Thanks go to Gerd Knorr]
+
+
+This is a driver for a graphic framebuffer for Matrox devices on
+Alpha, Intel and PPC boxes.
+
+Advantages:
+
+ * It provides a nice large console (128 cols + 48 lines with 1024x768)
+   without using tiny, unreadable fonts.
+ * You can run XF{68,86}_FBDev or XFree86 fbdev driver on top of /dev/fb0
+ * Most important: boot logo :-)
+
+Disadvantages:
+
+ * graphic mode is slower than text mode... but you should not notice
+   if you use same resolution as you used in textmode.
+
+
+How to use it?
+==============
+
+Switching modes is done using the video=matroxfb:vesa:... boot parameter
+or using `fbset` program.
+
+If you want, for example, enable a resolution of 1280x1024x24bpp you should
+pass to the kernel this command line: "video=matroxfb:vesa:0x1BB".
+
+You should compile in both vgacon (to boot if you remove you Matrox from
+box) and matroxfb (for graphics mode). You should not compile-in vesafb
+unless you have primary display on non-Matrox VBE2.0 device (see
+Documentation/fb/vesafb.rst for details).
+
+Currently supported video modes are (through vesa:... interface, PowerMac
+has [as addon] compatibility code):
+
+
+Graphic modes
+-------------
+
+===  =======  =======  =======  =======  =======
+bpp  640x400  640x480  768x576  800x600  960x720
+===  =======  =======  =======  =======  =======
+  4             0x12             0x102
+  8   0x100    0x101    0x180    0x103    0x188
+ 15            0x110    0x181    0x113    0x189
+ 16            0x111    0x182    0x114    0x18A
+ 24            0x1B2    0x184    0x1B5    0x18C
+ 32            0x112    0x183    0x115    0x18B
+===  =======  =======  =======  =======  =======
+
+
+Graphic modes (continued)
+-------------------------
+
+===  ======== ======== ========= ========= =========
+bpp  1024x768 1152x864 1280x1024 1408x1056 1600x1200
+===  ======== ======== ========= ========= =========
+  4    0x104             0x106
+  8    0x105    0x190    0x107     0x198     0x11C
+ 15    0x116    0x191    0x119     0x199     0x11D
+ 16    0x117    0x192    0x11A     0x19A     0x11E
+ 24    0x1B8    0x194    0x1BB     0x19C     0x1BF
+ 32    0x118    0x193    0x11B     0x19B
+===  ======== ======== ========= ========= =========
+
+
+Text modes
+----------
+
+==== =======  =======  ========  ========  ========
+text 640x400  640x480  1056x344  1056x400  1056x480
+==== =======  =======  ========  ========  ========
+ 8x8   0x1C0    0x108     0x10A     0x10B     0x10C
+8x16 2, 3, 7                        0x109
+==== =======  =======  ========  ========  ========
+
+You can enter these number either hexadecimal (leading `0x`) or decimal
+(0x100 = 256). You can also use value + 512 to achieve compatibility
+with your old number passed to vesafb.
+
+Non-listed number can be achieved by more complicated command-line, for
+example 1600x1200x32bpp can be specified by `video=matroxfb:vesa:0x11C,depth:32`.
+
+
+X11
+===
+
+XF{68,86}_FBDev should work just fine, but it is non-accelerated. On non-intel
+architectures there are some glitches for 24bpp videomodes. 8, 16 and 32bpp
+works fine.
+
+Running another (accelerated) X-Server like XF86_SVGA works too. But (at least)
+XFree servers have big troubles in multihead configurations (even on first
+head, not even talking about second). Running XFree86 4.x accelerated mga
+driver is possible, but you must not enable DRI - if you do, resolution and
+color depth of your X desktop must match resolution and color depths of your
+virtual consoles, otherwise X will corrupt accelerator settings.
+
+
+SVGALib
+=======
+
+Driver contains SVGALib compatibility code. It is turned on by choosing textual
+mode for console. You can do it at boot time by using videomode
+2,3,7,0x108-0x10C or 0x1C0. At runtime, `fbset -depth 0` does this work.
+Unfortunately, after SVGALib application exits, screen contents is corrupted.
+Switching to another console and back fixes it. I hope that it is SVGALib's
+problem and not mine, but I'm not sure.
+
+
+Configuration
+=============
+
+You can pass kernel command line options to matroxfb with
+`video=matroxfb:option1,option2:value2,option3` (multiple options should be
+separated by comma, values are separated from options by `:`).
+Accepted options:
+
+============ ===================================================================
+mem:X        size of memory (X can be in megabytes, kilobytes or bytes)
+	     You can only decrease value determined by driver because of
+	     it always probe for memory. Default is to use whole detected
+	     memory usable for on-screen display (i.e. max. 8 MB).
+disabled     do not load driver; you can use also `off`, but `disabled`
+	     is here too.
+enabled      load driver, if you have `video=matroxfb:disabled` in LILO
+	     configuration, you can override it by this (you cannot override
+	     `off`). It is default.
+noaccel      do not use acceleration engine. It does not work on Alphas.
+accel        use acceleration engine. It is default.
+nopan        create initial consoles with vyres = yres, thus disabling virtual
+	     scrolling.
+pan          create initial consoles as tall as possible (vyres = memory/vxres).
+	     It is default.
+nopciretry   disable PCI retries. It is needed for some broken chipsets,
+	     it is autodetected for intel's 82437. In this case device does
+	     not comply to PCI 2.1 specs (it will not guarantee that every
+	     transaction terminate with success or retry in 32 PCLK).
+pciretry     enable PCI retries. It is default, except for intel's 82437.
+novga        disables VGA I/O ports. It is default if BIOS did not enable
+	     device. You should not use this option, some boards then do not
+	     restart without power off.
+vga          preserve state of VGA I/O ports. It is default. Driver does not
+	     enable VGA I/O if BIOS did not it (it is not safe to enable it in
+	     most cases).
+nobios       disables BIOS ROM. It is default if BIOS did not enable BIOS
+	     itself. You should not use this option, some boards then do not
+	     restart without power off.
+bios         preserve state of BIOS ROM. It is default. Driver does not enable
+	     BIOS if BIOS was not enabled before.
+noinit       tells driver, that devices were already initialized. You should use
+	     it if you have G100 and/or if driver cannot detect memory, you see
+	     strange pattern on screen and so on. Devices not enabled by BIOS
+	     are still initialized. It is default.
+init         driver initializes every device it knows about.
+memtype      specifies memory type, implies 'init'. This is valid only for G200
+	     and G400 and has following meaning:
+
+	       G200:
+		 -  0 -> 2x128Kx32 chips, 2MB onboard, probably sgram
+		 -  1 -> 2x128Kx32 chips, 4MB onboard, probably sgram
+		 -  2 -> 2x256Kx32 chips, 4MB onboard, probably sgram
+		 -  3 -> 2x256Kx32 chips, 8MB onboard, probably sgram
+		 -  4 -> 2x512Kx16 chips, 8/16MB onboard, probably sdram only
+		 -  5 -> same as above
+		 -  6 -> 4x128Kx32 chips, 4MB onboard, probably sgram
+		 -  7 -> 4x128Kx32 chips, 8MB onboard, probably sgram
+	       G400:
+		 -  0 -> 2x512Kx16 SDRAM, 16/32MB
+		 -	 2x512Kx32 SGRAM, 16/32MB
+		 -  1 -> 2x256Kx32 SGRAM, 8/16MB
+		 -  2 -> 4x128Kx32 SGRAM, 8/16MB
+		 -  3 -> 4x512Kx32 SDRAM, 32MB
+		 -  4 -> 4x256Kx32 SGRAM, 16/32MB
+		 -  5 -> 2x1Mx32 SDRAM, 32MB
+		 -  6 -> reserved
+		 -  7 -> reserved
+
+	     You should use sdram or sgram parameter in addition to memtype
+	     parameter.
+nomtrr       disables write combining on frame buffer. This slows down driver
+	     but there is reported minor incompatibility between GUS DMA and
+	     XFree under high loads if write combining is enabled (sound
+	     dropouts).
+mtrr         enables write combining on frame buffer. It speeds up video
+	     accesses much. It is default. You must have MTRR support enabled
+	     in kernel and your CPU must have MTRR (f.e. Pentium II have them).
+sgram        tells to driver that you have Gxx0 with SGRAM memory. It has no
+	     effect without `init`.
+sdram        tells to driver that you have Gxx0 with SDRAM memory.
+	     It is a default.
+inv24        change timings parameters for 24bpp modes on Millennium and
+	     Millennium II. Specify this if you see strange color shadows
+	     around  characters.
+noinv24      use standard timings. It is the default.
+inverse      invert colors on screen (for LCD displays)
+noinverse    show true colors on screen. It is default.
+dev:X        bind driver to device X. Driver numbers device from 0 up to N,
+	     where device 0 is first `known` device found, 1 second and so on.
+	     lspci lists devices in this order.
+	     Default is `every` known device.
+nohwcursor   disables hardware cursor (use software cursor instead).
+hwcursor     enables hardware cursor. It is default. If you are using
+	     non-accelerated mode (`noaccel` or `fbset -accel false`), software
+	     cursor is used (except for text mode).
+noblink      disables cursor blinking. Cursor in text mode always blinks (hw
+	     limitation).
+blink        enables cursor blinking. It is default.
+nofastfont   disables fastfont feature. It is default.
+fastfont:X   enables fastfont feature. X specifies size of memory reserved for
+	     font data, it must be >= (fontwidth*fontheight*chars_in_font)/8.
+	     It is faster on Gx00 series, but slower on older cards.
+grayscale    enable grayscale summing. It works in PSEUDOCOLOR modes (text,
+	     4bpp, 8bpp). In DIRECTCOLOR modes it is limited to characters
+	     displayed through putc/putcs. Direct accesses to framebuffer
+	     can paint colors.
+nograyscale  disable grayscale summing. It is default.
+cross4MB     enables that pixel line can cross 4MB boundary. It is default for
+	     non-Millennium.
+nocross4MB   pixel line must not cross 4MB boundary. It is default for
+	     Millennium I or II, because of these devices have hardware
+	     limitations which do not allow this. But this option is
+	     incompatible with some (if not all yet released) versions of
+	     XF86_FBDev.
+dfp          enables digital flat panel interface. This option is incompatible
+	     with secondary (TV) output - if DFP is active, TV output must be
+	     inactive and vice versa. DFP always uses same timing as primary
+	     (monitor) output.
+dfp:X        use settings X for digital flat panel interface. X is number from
+	     0 to 0xFF, and meaning of each individual bit is described in
+	     G400 manual, in description of DAC register 0x1F. For normal
+	     operation you should set all bits to zero, except lowest bit. This
+	     lowest bit selects who is source of display clocks, whether G400,
+	     or panel. Default value is now read back from hardware - so you
+	     should specify this value only if you are also using `init`
+	     parameter.
+outputs:XYZ  set mapping between CRTC and outputs. Each letter can have value
+	     of 0 (for no CRTC), 1 (CRTC1) or 2 (CRTC2), and first letter
+	     corresponds to primary analog output, second letter to the
+	     secondary analog output and third letter to the DVI output.
+	     Default setting is 100 for cards below G400 or G400 without DFP,
+	     101 for G400 with DFP, and 111 for G450 and G550. You can set
+	     mapping only on first card, use matroxset for setting up other
+	     devices.
+vesa:X       selects startup videomode. X is number from 0 to 0x1FF, see table
+	     above for detailed explanation. Default is 640x480x8bpp if driver
+	     has 8bpp support. Otherwise first available of 640x350x4bpp,
+	     640x480x15bpp, 640x480x24bpp, 640x480x32bpp or 80x25 text
+	     (80x25 text is always available).
+============ ===================================================================
+
+If you are not satisfied with videomode selected by `vesa` option, you
+can modify it with these options:
+
+============ ===================================================================
+xres:X       horizontal resolution, in pixels. Default is derived from `vesa`
+	     option.
+yres:X       vertical resolution, in pixel lines. Default is derived from `vesa`
+	     option.
+upper:X      top boundary: lines between end of VSYNC pulse and start of first
+	     pixel line of picture. Default is derived from `vesa` option.
+lower:X      bottom boundary: lines between end of picture and start of VSYNC
+	     pulse. Default is derived from `vesa` option.
+vslen:X      length of VSYNC pulse, in lines. Default is derived from `vesa`
+	     option.
+left:X       left boundary: pixels between end of HSYNC pulse and first pixel.
+	     Default is derived from `vesa` option.
+right:X      right boundary: pixels between end of picture and start of HSYNC
+	     pulse. Default is derived from `vesa` option.
+hslen:X      length of HSYNC pulse, in pixels. Default is derived from `vesa`
+	     option.
+pixclock:X   dotclocks, in ps (picoseconds). Default is derived from `vesa`
+	     option and from `fh` and `fv` options.
+sync:X       sync. pulse - bit 0 inverts HSYNC polarity, bit 1 VSYNC polarity.
+	     If bit 3 (value 0x08) is set, composite sync instead of HSYNC is
+	     generated. If bit 5 (value 0x20) is set, sync on green is turned
+	     on. Do not forget that if you want sync on green, you also probably
+	     want composite sync.
+	     Default depends on `vesa`.
+depth:X      Bits per pixel: 0=text, 4,8,15,16,24 or 32. Default depends on
+	     `vesa`.
+============ ===================================================================
+
+If you know capabilities of your monitor, you can specify some (or all) of
+`maxclk`, `fh` and `fv`. In this case, `pixclock` is computed so that
+pixclock <= maxclk, real_fh <= fh and real_fv <= fv.
+
+============ ==================================================================
+maxclk:X     maximum dotclock. X can be specified in MHz, kHz or Hz. Default is
+	     `don`t care`.
+fh:X         maximum horizontal synchronization frequency. X can be specified
+	     in kHz or Hz. Default is `don't care`.
+fv:X         maximum vertical frequency. X must be specified in Hz. Default is
+	     70 for modes derived from `vesa` with yres <= 400, 60Hz for
+	     yres > 400.
+============ ==================================================================
+
+
+Limitations
+===========
+
+There are known and unknown bugs, features and misfeatures.
+Currently there are following known bugs:
+
+ - SVGALib does not restore screen on exit
+ - generic fbcon-cfbX procedures do not work on Alphas. Due to this,
+   `noaccel` (and cfb4 accel) driver does not work on Alpha. So everyone
+   with access to `/dev/fb*` on Alpha can hang machine (you should restrict
+   access to `/dev/fb*` - everyone with access to this device can destroy
+   your monitor, believe me...).
+ - 24bpp does not support correctly XF-FBDev on big-endian architectures.
+ - interlaced text mode is not supported; it looks like hardware limitation,
+   but I'm not sure.
+ - Gxx0 SGRAM/SDRAM is not autodetected.
+ - If you are using more than one framebuffer device, you must boot kernel
+   with 'video=scrollback:0'.
+ - maybe more...
+
+And following misfeatures:
+
+ - SVGALib does not restore screen on exit.
+ - pixclock for text modes is limited by hardware to
+
+    - 83 MHz on G200
+    - 66 MHz on Millennium I
+    - 60 MHz on Millennium II
+
+   Because I have no access to other devices, I do not know specific
+   frequencies for them. So driver does not check this and allows you to
+   set frequency higher that this. It causes sparks, black holes and other
+   pretty effects on screen. Device was not destroyed during tests. :-)
+ - my Millennium G200 oscillator has frequency range from 35 MHz to 380 MHz
+   (and it works with 8bpp on about 320 MHz dotclocks (and changed mclk)).
+   But Matrox says on product sheet that VCO limit is 50-250 MHz, so I believe
+   them (maybe that chip overheats, but it has a very big cooler (G100 has
+   none), so it should work).
+ - special mixed video/graphics videomodes of Mystique and Gx00 - 2G8V16 and
+   G16V16 are not supported
+ - color keying is not supported
+ - feature connector of Mystique and Gx00 is set to VGA mode (it is disabled
+   by BIOS)
+ - DDC (monitor detection) is supported through dualhead driver
+ - some check for input values are not so strict how it should be (you can
+   specify vslen=4000 and so on).
+ - maybe more...
+
+And following features:
+
+ - 4bpp is available only on Millennium I and Millennium II. It is hardware
+   limitation.
+ - selection between 1:5:5:5 and 5:6:5 16bpp videomode is done by -rgba
+   option of fbset: "fbset -depth 16 -rgba 5,5,5" selects 1:5:5:5, anything
+   else selects 5:6:5 mode.
+ - text mode uses 6 bit VGA palette instead of 8 bit (one of 262144 colors
+   instead of one of 16M colors). It is due to hardware limitation of
+   Millennium I/II and SVGALib compatibility.
+
+
+Benchmarks
+==========
+It is time to redraw whole screen 1000 times in 1024x768, 60Hz. It is
+time for draw 6144000 characters on screen through /dev/vcsa
+(for 32bpp it is about 3GB of data (exactly 3000 MB); for 8x16 font in
+16 seconds, i.e. 187 MBps).
+Times were obtained from one older version of driver, now they are about 3%
+faster, it is kernel-space only time on P-II/350 MHz, Millennium I in 33 MHz
+PCI slot, G200 in AGP 2x slot. I did not test vgacon::
+
+  NOACCEL
+	8x16                 12x22
+	Millennium I  G200   Millennium I  G200
+  8bpp    16.42         9.54   12.33         9.13
+  16bpp   21.00        15.70   19.11        15.02
+  24bpp   36.66        36.66   35.00        35.00
+  32bpp   35.00        30.00   33.85        28.66
+
+  ACCEL, nofastfont
+	8x16                 12x22                6x11
+	Millennium I  G200   Millennium I  G200   Millennium I  G200
+  8bpp     7.79         7.24   13.55         7.78   30.00        21.01
+  16bpp    9.13         7.78   16.16         7.78   30.00        21.01
+  24bpp   14.17        10.72   18.69        10.24   34.99        21.01
+  32bpp   16.15	     16.16   18.73        13.09   34.99        21.01
+
+  ACCEL, fastfont
+	8x16                 12x22                6x11
+	Millennium I  G200   Millennium I  G200   Millennium I  G200
+  8bpp     8.41         6.01    6.54         4.37   16.00        10.51
+  16bpp    9.54         9.12    8.76         6.17   17.52        14.01
+  24bpp   15.00        12.36   11.67        10.00   22.01        18.32
+  32bpp   16.18        18.29*  12.71        12.74   24.44        21.00
+
+  TEXT
+	8x16
+	Millennium I  G200
+  TEXT     3.29         1.50
+
+  * Yes, it is slower than Millennium I.
+
+
+Dualhead G400
+=============
+Driver supports dualhead G400 with some limitations:
+ + secondary head shares videomemory with primary head. It is not problem
+   if you have 32MB of videoram, but if you have only 16MB, you may have
+   to think twice before choosing videomode (for example twice 1880x1440x32bpp
+   is not possible).
+ + due to hardware limitation, secondary head can use only 16 and 32bpp
+   videomodes.
+ + secondary head is not accelerated. There were bad problems with accelerated
+   XFree when secondary head used to use acceleration.
+ + secondary head always powerups in 640x480@60-32 videomode. You have to use
+   fbset to change this mode.
+ + secondary head always powerups in monitor mode. You have to use fbmatroxset
+   to change it to TV mode. Also, you must select at least 525 lines for
+   NTSC output and 625 lines for PAL output.
+ + kernel is not fully multihead ready. So some things are impossible to do.
+ + if you compiled it as module, you must insert i2c-matroxfb, matroxfb_maven
+   and matroxfb_crtc2 into kernel.
+
+
+Dualhead G450
+=============
+Driver supports dualhead G450 with some limitations:
+ + secondary head shares videomemory with primary head. It is not problem
+   if you have 32MB of videoram, but if you have only 16MB, you may have
+   to think twice before choosing videomode.
+ + due to hardware limitation, secondary head can use only 16 and 32bpp
+   videomodes.
+ + secondary head is not accelerated.
+ + secondary head always powerups in 640x480@60-32 videomode. You have to use
+   fbset to change this mode.
+ + TV output is not supported
+ + kernel is not fully multihead ready, so some things are impossible to do.
+ + if you compiled it as module, you must insert matroxfb_g450 and matroxfb_crtc2
+   into kernel.
+
+Petr Vandrovec <vandrove@vc.cvut.cz>
diff --git a/Documentation/fb/matroxfb.txt b/Documentation/fb/matroxfb.txt
deleted file mode 100644
index b95f5bb522f2..000000000000
--- a/Documentation/fb/matroxfb.txt
+++ /dev/null
@@ -1,413 +0,0 @@
-[This file is cloned from VesaFB. Thanks go to Gerd Knorr]
-
-What is matroxfb?
-=================
-
-This is a driver for a graphic framebuffer for Matrox devices on
-Alpha, Intel and PPC boxes.
-
-Advantages:
-
- * It provides a nice large console (128 cols + 48 lines with 1024x768)
-   without using tiny, unreadable fonts.
- * You can run XF{68,86}_FBDev or XFree86 fbdev driver on top of /dev/fb0
- * Most important: boot logo :-)
-
-Disadvantages:
-
- * graphic mode is slower than text mode... but you should not notice
-   if you use same resolution as you used in textmode.
-
-
-How to use it?
-==============
-
-Switching modes is done using the video=matroxfb:vesa:... boot parameter
-or using `fbset' program.
-
-If you want, for example, enable a resolution of 1280x1024x24bpp you should
-pass to the kernel this command line: "video=matroxfb:vesa:0x1BB".
-
-You should compile in both vgacon (to boot if you remove you Matrox from
-box) and matroxfb (for graphics mode). You should not compile-in vesafb
-unless you have primary display on non-Matrox VBE2.0 device (see 
-Documentation/fb/vesafb.txt for details).
-
-Currently supported video modes are (through vesa:... interface, PowerMac
-has [as addon] compatibility code):
-
-
-[Graphic modes]
-
-bpp | 640x400  640x480  768x576  800x600  960x720
-----+--------------------------------------------
-  4 |            0x12             0x102            
-  8 |  0x100    0x101    0x180    0x103    0x188   
- 15 |           0x110    0x181    0x113    0x189   
- 16 |           0x111    0x182    0x114    0x18A   
- 24 |           0x1B2    0x184    0x1B5    0x18C   
- 32 |           0x112    0x183    0x115    0x18B   
-
-
-[Graphic modes (continued)]
-
-bpp | 1024x768 1152x864 1280x1024 1408x1056 1600x1200
-----+------------------------------------------------
-  4 |   0x104             0x106
-  8 |   0x105    0x190    0x107     0x198     0x11C
- 15 |   0x116    0x191    0x119     0x199     0x11D
- 16 |   0x117    0x192    0x11A     0x19A     0x11E
- 24 |   0x1B8    0x194    0x1BB     0x19C     0x1BF
- 32 |   0x118    0x193    0x11B     0x19B
-
-
-[Text modes]
-
-text | 640x400  640x480  1056x344  1056x400  1056x480
------+------------------------------------------------
- 8x8 |  0x1C0    0x108     0x10A     0x10B     0x10C
-8x16 | 2, 3, 7                       0x109
-
-You can enter these number either hexadecimal (leading `0x') or decimal
-(0x100 = 256). You can also use value + 512 to achieve compatibility
-with your old number passed to vesafb.
-
-Non-listed number can be achieved by more complicated command-line, for
-example 1600x1200x32bpp can be specified by `video=matroxfb:vesa:0x11C,depth:32'.
-
-
-X11
-===
-
-XF{68,86}_FBDev should work just fine, but it is non-accelerated. On non-intel
-architectures there are some glitches for 24bpp videomodes. 8, 16 and 32bpp
-works fine.
-
-Running another (accelerated) X-Server like XF86_SVGA works too. But (at least)
-XFree servers have big troubles in multihead configurations (even on first
-head, not even talking about second). Running XFree86 4.x accelerated mga 
-driver is possible, but you must not enable DRI - if you do, resolution and
-color depth of your X desktop must match resolution and color depths of your
-virtual consoles, otherwise X will corrupt accelerator settings.
-
-
-SVGALib
-=======
-
-Driver contains SVGALib compatibility code. It is turned on by choosing textual
-mode for console. You can do it at boot time by using videomode
-2,3,7,0x108-0x10C or 0x1C0. At runtime, `fbset -depth 0' does this work.
-Unfortunately, after SVGALib application exits, screen contents is corrupted.
-Switching to another console and back fixes it. I hope that it is SVGALib's
-problem and not mine, but I'm not sure.
-
-
-Configuration
-=============
-
-You can pass kernel command line options to matroxfb with
-`video=matroxfb:option1,option2:value2,option3' (multiple options should be 
-separated by comma, values are separated from options by `:'). 
-Accepted options:
-
-mem:X    - size of memory (X can be in megabytes, kilobytes or bytes)
-           You can only decrease value determined by driver because of
-	   it always probe for memory. Default is to use whole detected
-	   memory usable for on-screen display (i.e. max. 8 MB).
-disabled - do not load driver; you can use also `off', but `disabled'
-           is here too.
-enabled  - load driver, if you have `video=matroxfb:disabled' in LILO
-           configuration, you can override it by this (you cannot override
-	   `off'). It is default.
-noaccel  - do not use acceleration engine. It does not work on Alphas.
-accel    - use acceleration engine. It is default.
-nopan    - create initial consoles with vyres = yres, thus disabling virtual
-           scrolling.
-pan      - create initial consoles as tall as possible (vyres = memory/vxres).
-           It is default.
-nopciretry - disable PCI retries. It is needed for some broken chipsets,
-           it is autodetected for intel's 82437. In this case device does
-	   not comply to PCI 2.1 specs (it will not guarantee that every
-	   transaction terminate with success or retry in 32 PCLK).
-pciretry - enable PCI retries. It is default, except for intel's 82437.
-novga    - disables VGA I/O ports. It is default if BIOS did not enable device.
-           You should not use this option, some boards then do not restart
-	   without power off.
-vga      - preserve state of VGA I/O ports. It is default. Driver does not
-           enable VGA I/O if BIOS did not it (it is not safe to enable it in
-	   most cases).
-nobios   - disables BIOS ROM. It is default if BIOS did not enable BIOS itself.
-           You should not use this option, some boards then do not restart
-	   without power off.
-bios     - preserve state of BIOS ROM. It is default. Driver does not enable
-           BIOS if BIOS was not enabled before.
-noinit   - tells driver, that devices were already initialized. You should use
-           it if you have G100 and/or if driver cannot detect memory, you see
-	   strange pattern on screen and so on. Devices not enabled by BIOS
-	   are still initialized. It is default.
-init     - driver initializes every device it knows about.
-memtype  - specifies memory type, implies 'init'. This is valid only for G200 
-           and G400 and has following meaning:
-             G200: 0 -> 2x128Kx32 chips, 2MB onboard, probably sgram
-                   1 -> 2x128Kx32 chips, 4MB onboard, probably sgram
-                   2 -> 2x256Kx32 chips, 4MB onboard, probably sgram
-                   3 -> 2x256Kx32 chips, 8MB onboard, probably sgram
-                   4 -> 2x512Kx16 chips, 8/16MB onboard, probably sdram only
-                   5 -> same as above
-                   6 -> 4x128Kx32 chips, 4MB onboard, probably sgram
-                   7 -> 4x128Kx32 chips, 8MB onboard, probably sgram
-             G400: 0 -> 2x512Kx16 SDRAM, 16/32MB
-                        2x512Kx32 SGRAM, 16/32MB
-                   1 -> 2x256Kx32 SGRAM, 8/16MB
-                   2 -> 4x128Kx32 SGRAM, 8/16MB
-                   3 -> 4x512Kx32 SDRAM, 32MB
-                   4 -> 4x256Kx32 SGRAM, 16/32MB
-                   5 -> 2x1Mx32 SDRAM, 32MB
-                   6 -> reserved
-                   7 -> reserved
-           You should use sdram or sgram parameter in addition to memtype 
-           parameter.
-nomtrr   - disables write combining on frame buffer. This slows down driver but
-           there is reported minor incompatibility between GUS DMA and XFree
-	   under high loads if write combining is enabled (sound dropouts).
-mtrr     - enables write combining on frame buffer. It speeds up video accesses
-           much. It is default. You must have MTRR support enabled in kernel
-	   and your CPU must have MTRR (f.e. Pentium II have them).
-sgram    - tells to driver that you have Gxx0 with SGRAM memory. It has no
-           effect without `init'.
-sdram    - tells to driver that you have Gxx0 with SDRAM memory.
-           It is a default.
-inv24    - change timings parameters for 24bpp modes on Millennium and
-           Millennium II. Specify this if you see strange color shadows around
-	   characters.
-noinv24  - use standard timings. It is the default.
-inverse  - invert colors on screen (for LCD displays)
-noinverse - show true colors on screen. It is default.
-dev:X    - bind driver to device X. Driver numbers device from 0 up to N,
-           where device 0 is first `known' device found, 1 second and so on.
-	   lspci lists devices in this order.
-	   Default is `every' known device.
-nohwcursor - disables hardware cursor (use software cursor instead).
-hwcursor - enables hardware cursor. It is default. If you are using
-           non-accelerated mode (`noaccel' or `fbset -accel false'), software
-	   cursor is used (except for text mode).
-noblink  - disables cursor blinking. Cursor in text mode always blinks (hw
-           limitation).
-blink    - enables cursor blinking. It is default.
-nofastfont - disables fastfont feature. It is default.
-fastfont:X - enables fastfont feature. X specifies size of memory reserved for
-             font data, it must be >= (fontwidth*fontheight*chars_in_font)/8.
-	     It is faster on Gx00 series, but slower on older cards.
-grayscale - enable grayscale summing. It works in PSEUDOCOLOR modes (text,
-            4bpp, 8bpp). In DIRECTCOLOR modes it is limited to characters
-	    displayed through putc/putcs. Direct accesses to framebuffer
-	    can paint colors.
-nograyscale - disable grayscale summing. It is default.
-cross4MB - enables that pixel line can cross 4MB boundary. It is default for
-           non-Millennium.
-nocross4MB - pixel line must not cross 4MB boundary. It is default for
-             Millennium I or II, because of these devices have hardware
-	     limitations which do not allow this. But this option is
-	     incompatible with some (if not all yet released) versions of
-	     XF86_FBDev.
-dfp      - enables digital flat panel interface. This option is incompatible with
-           secondary (TV) output - if DFP is active, TV output must be
-	   inactive and vice versa. DFP always uses same timing as primary
-	   (monitor) output.
-dfp:X    - use settings X for digital flat panel interface. X is number from
-           0 to 0xFF, and meaning of each individual bit is described in
-	   G400 manual, in description of DAC register 0x1F. For normal operation
-	   you should set all bits to zero, except lowest bit. This lowest bit
-	   selects who is source of display clocks, whether G400, or panel.
-	   Default value is now read back from hardware - so you should specify
-	   this value only if you are also using `init' parameter.
-outputs:XYZ - set mapping between CRTC and outputs. Each letter can have value
-           of 0 (for no CRTC), 1 (CRTC1) or 2 (CRTC2), and first letter corresponds
-	   to primary analog output, second letter to the secondary analog output
-	   and third letter to the DVI output. Default setting is 100 for
-	   cards below G400 or G400 without DFP, 101 for G400 with DFP, and
-	   111 for G450 and G550. You can set mapping only on first card,
-	   use matroxset for setting up other devices.
-vesa:X   - selects startup videomode. X is number from 0 to 0x1FF, see table
-           above for detailed explanation. Default is 640x480x8bpp if driver
-	   has 8bpp support. Otherwise first available of 640x350x4bpp,
-	   640x480x15bpp, 640x480x24bpp, 640x480x32bpp or 80x25 text
-	   (80x25 text is always available).
-
-If you are not satisfied with videomode selected by `vesa' option, you
-can modify it with these options:
-
-xres:X   - horizontal resolution, in pixels. Default is derived from `vesa'
-           option.
-yres:X   - vertical resolution, in pixel lines. Default is derived from `vesa'
-           option.
-upper:X  - top boundary: lines between end of VSYNC pulse and start of first
-           pixel line of picture. Default is derived from `vesa' option.
-lower:X  - bottom boundary: lines between end of picture and start of VSYNC
-           pulse. Default is derived from `vesa' option.
-vslen:X  - length of VSYNC pulse, in lines. Default is derived from `vesa'
-           option.
-left:X   - left boundary: pixels between end of HSYNC pulse and first pixel.
-           Default is derived from `vesa' option.
-right:X  - right boundary: pixels between end of picture and start of HSYNC
-           pulse. Default is derived from `vesa' option.
-hslen:X  - length of HSYNC pulse, in pixels. Default is derived from `vesa'
-           option.
-pixclock:X - dotclocks, in ps (picoseconds). Default is derived from `vesa'
-             option and from `fh' and `fv' options.
-sync:X   - sync. pulse - bit 0 inverts HSYNC polarity, bit 1 VSYNC polarity.
-           If bit 3 (value 0x08) is set, composite sync instead of HSYNC is
-	   generated. If bit 5 (value 0x20) is set, sync on green is turned on.
-	   Do not forget that if you want sync on green, you also probably
-	   want composite sync.
-	   Default depends on `vesa'.
-depth:X  - Bits per pixel: 0=text, 4,8,15,16,24 or 32. Default depends on
-           `vesa'.
-
-If you know capabilities of your monitor, you can specify some (or all) of
-`maxclk', `fh' and `fv'. In this case, `pixclock' is computed so that
-pixclock <= maxclk, real_fh <= fh and real_fv <= fv.
-
-maxclk:X - maximum dotclock. X can be specified in MHz, kHz or Hz. Default is
-           `don't care'.
-fh:X     - maximum horizontal synchronization frequency. X can be specified
-           in kHz or Hz. Default is `don't care'.
-fv:X     - maximum vertical frequency. X must be specified in Hz. Default is
-           70 for modes derived from `vesa' with yres <= 400, 60Hz for
-	   yres > 400.
-
-
-Limitations
-===========
-
-There are known and unknown bugs, features and misfeatures.
-Currently there are following known bugs:
- + SVGALib does not restore screen on exit
- + generic fbcon-cfbX procedures do not work on Alphas. Due to this,
-   `noaccel' (and cfb4 accel) driver does not work on Alpha. So everyone
-   with access to /dev/fb* on Alpha can hang machine (you should restrict
-   access to /dev/fb* - everyone with access to this device can destroy
-   your monitor, believe me...).
- + 24bpp does not support correctly XF-FBDev on big-endian architectures.
- + interlaced text mode is not supported; it looks like hardware limitation,
-   but I'm not sure.
- + Gxx0 SGRAM/SDRAM is not autodetected.
- + If you are using more than one framebuffer device, you must boot kernel
-   with 'video=scrollback:0'.
- + maybe more...
-And following misfeatures:
- + SVGALib does not restore screen on exit.
- + pixclock for text modes is limited by hardware to
-    83 MHz on G200
-    66 MHz on Millennium I
-    60 MHz on Millennium II
-   Because I have no access to other devices, I do not know specific
-   frequencies for them. So driver does not check this and allows you to
-   set frequency higher that this. It causes sparks, black holes and other
-   pretty effects on screen. Device was not destroyed during tests. :-)
- + my Millennium G200 oscillator has frequency range from 35 MHz to 380 MHz
-   (and it works with 8bpp on about 320 MHz dotclocks (and changed mclk)).
-   But Matrox says on product sheet that VCO limit is 50-250 MHz, so I believe
-   them (maybe that chip overheats, but it has a very big cooler (G100 has
-   none), so it should work).
- + special mixed video/graphics videomodes of Mystique and Gx00 - 2G8V16 and
-   G16V16 are not supported
- + color keying is not supported
- + feature connector of Mystique and Gx00 is set to VGA mode (it is disabled
-   by BIOS)
- + DDC (monitor detection) is supported through dualhead driver
- + some check for input values are not so strict how it should be (you can
-   specify vslen=4000 and so on).
- + maybe more...
-And following features:
- + 4bpp is available only on Millennium I and Millennium II. It is hardware
-   limitation.
- + selection between 1:5:5:5 and 5:6:5 16bpp videomode is done by -rgba 
-   option of fbset: "fbset -depth 16 -rgba 5,5,5" selects 1:5:5:5, anything
-   else selects 5:6:5 mode.
- + text mode uses 6 bit VGA palette instead of 8 bit (one of 262144 colors
-   instead of one of 16M colors). It is due to hardware limitation of 
-   Millennium I/II and SVGALib compatibility.
-
-
-Benchmarks
-==========
-It is time to redraw whole screen 1000 times in 1024x768, 60Hz. It is
-time for draw 6144000 characters on screen through /dev/vcsa
-(for 32bpp it is about 3GB of data (exactly 3000 MB); for 8x16 font in 
-16 seconds, i.e. 187 MBps).
-Times were obtained from one older version of driver, now they are about 3%
-faster, it is kernel-space only time on P-II/350 MHz, Millennium I in 33 MHz
-PCI slot, G200 in AGP 2x slot. I did not test vgacon.
-
-NOACCEL
-        8x16                 12x22
-        Millennium I  G200   Millennium I  G200
-8bpp    16.42         9.54   12.33         9.13
-16bpp   21.00        15.70   19.11        15.02
-24bpp   36.66        36.66   35.00        35.00
-32bpp   35.00        30.00   33.85        28.66
-
-ACCEL, nofastfont
-        8x16                 12x22                6x11
-	Millennium I  G200   Millennium I  G200   Millennium I  G200
-8bpp     7.79         7.24   13.55         7.78   30.00        21.01
-16bpp    9.13         7.78   16.16         7.78   30.00        21.01
-24bpp   14.17        10.72   18.69        10.24   34.99        21.01
-32bpp   16.15	     16.16   18.73        13.09   34.99        21.01
-
-ACCEL, fastfont
-        8x16                 12x22                6x11
-	Millennium I  G200   Millennium I  G200   Millennium I  G200
-8bpp     8.41         6.01    6.54         4.37   16.00        10.51
-16bpp    9.54         9.12    8.76         6.17   17.52        14.01
-24bpp   15.00        12.36   11.67        10.00   22.01        18.32
-32bpp   16.18        18.29*  12.71        12.74   24.44        21.00
-
-TEXT
-        8x16
-	Millennium I  G200
-TEXT     3.29         1.50
-
-* Yes, it is slower than Millennium I.
-
-
-Dualhead G400
-=============
-Driver supports dualhead G400 with some limitations:
- + secondary head shares videomemory with primary head. It is not problem
-   if you have 32MB of videoram, but if you have only 16MB, you may have
-   to think twice before choosing videomode (for example twice 1880x1440x32bpp
-   is not possible).
- + due to hardware limitation, secondary head can use only 16 and 32bpp
-   videomodes.
- + secondary head is not accelerated. There were bad problems with accelerated
-   XFree when secondary head used to use acceleration.
- + secondary head always powerups in 640x480@60-32 videomode. You have to use
-   fbset to change this mode.
- + secondary head always powerups in monitor mode. You have to use fbmatroxset
-   to change it to TV mode. Also, you must select at least 525 lines for
-   NTSC output and 625 lines for PAL output.
- + kernel is not fully multihead ready. So some things are impossible to do.
- + if you compiled it as module, you must insert i2c-matroxfb, matroxfb_maven
-   and matroxfb_crtc2 into kernel.
-
-
-Dualhead G450
-=============
-Driver supports dualhead G450 with some limitations:
- + secondary head shares videomemory with primary head. It is not problem
-   if you have 32MB of videoram, but if you have only 16MB, you may have
-   to think twice before choosing videomode.
- + due to hardware limitation, secondary head can use only 16 and 32bpp
-   videomodes.
- + secondary head is not accelerated.
- + secondary head always powerups in 640x480@60-32 videomode. You have to use
-   fbset to change this mode.
- + TV output is not supported
- + kernel is not fully multihead ready, so some things are impossible to do.
- + if you compiled it as module, you must insert matroxfb_g450 and matroxfb_crtc2
-   into kernel.
-	
---
-Petr Vandrovec <vandrove@vc.cvut.cz>
diff --git a/Documentation/fb/metronomefb.txt b/Documentation/fb/metronomefb.rst
similarity index 98%
rename from Documentation/fb/metronomefb.txt
rename to Documentation/fb/metronomefb.rst
index 237ca412582d..63e1d31a7e54 100644
--- a/Documentation/fb/metronomefb.txt
+++ b/Documentation/fb/metronomefb.rst
@@ -1,6 +1,9 @@
-			Metronomefb
-			-----------
+===========
+Metronomefb
+===========
+
 Maintained by Jaya Kumar <jayakumar.lkml.gmail.com>
+
 Last revised: Mar 10, 2008
 
 Metronomefb is a driver for the Metronome display controller. The controller
@@ -33,4 +36,3 @@ the physical media.
 Metronomefb uses the deferred IO interface so that it can provide a memory
 mappable frame buffer. It has been tested with tinyx (Xfbdev). It is known
 to work at this time with xeyes, xclock, xloadimage, xpdf.
-
diff --git a/Documentation/fb/modedb.txt b/Documentation/fb/modedb.rst
similarity index 87%
rename from Documentation/fb/modedb.txt
rename to Documentation/fb/modedb.rst
index 16aa08453911..3c2397293977 100644
--- a/Documentation/fb/modedb.txt
+++ b/Documentation/fb/modedb.rst
@@ -1,6 +1,6 @@
-
-
-			modedb default video mode support
+=================================
+modedb default video mode support
+=================================
 
 
 Currently all frame buffer device drivers have their own video mode databases,
@@ -18,7 +18,7 @@ When a frame buffer device receives a video= option it doesn't know, it should
 consider that to be a video mode option. If no frame buffer device is specified
 in a video= option, fbmem considers that to be a global video mode option.
 
-Valid mode specifiers (mode_option argument):
+Valid mode specifiers (mode_option argument)::
 
     <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
     <name>[-<bpp>][@<refresh>]
@@ -45,15 +45,18 @@ signals (e.g. HDMI and DVI-I). For other outputs it behaves like 'e'. If 'd'
 is specified the output is disabled.
 
 You can additionally specify which output the options matches to.
-To force the VGA output to be enabled and drive a specific mode say:
+To force the VGA output to be enabled and drive a specific mode say::
+
     video=VGA-1:1280x1024@60me
 
-Specifying the option multiple times for different ports is possible, e.g.:
+Specifying the option multiple times for different ports is possible, e.g.::
+
     video=LVDS-1:d video=HDMI-1:D
 
-***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo *****
+-----------------------------------------------------------------------------
 
 What is the VESA(TM) Coordinated Video Timings (CVT)?
+=====================================================
 
 From the VESA(TM) Website:
 
@@ -90,14 +93,14 @@ determined from its EDID. The version 1.3 of the EDID has extra 128-byte
 blocks where additional timing information is placed.  As of this time, there
 is no support yet in the layer to parse this additional blocks.)
 
-CVT also introduced a new naming convention (should be seen from dmesg output):
+CVT also introduced a new naming convention (should be seen from dmesg output)::
 
     <pix>M<a>[-R]
 
     where: pix = total amount of pixels in MB (xres x yres)
-           M   = always present
-           a   = aspect ratio (3 - 4:3; 4 - 5:4; 9 - 15:9, 16:9; A - 16:10)
-          -R   = reduced blanking
+	   M   = always present
+	   a   = aspect ratio (3 - 4:3; 4 - 5:4; 9 - 15:9, 16:9; A - 16:10)
+	  -R   = reduced blanking
 
 	  example:  .48M3-R - 800x600 with reduced blanking
 
@@ -110,15 +113,15 @@ Note: VESA(TM) has restrictions on what is a standard CVT timing:
 If one of the above are not satisfied, the kernel will print a warning but the
 timings will still be calculated.
 
-***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo *****
+-----------------------------------------------------------------------------
 
-To find a suitable video mode, you just call
+To find a suitable video mode, you just call::
 
-int __init fb_find_mode(struct fb_var_screeninfo *var,
-                        struct fb_info *info, const char *mode_option,
-                        const struct fb_videomode *db, unsigned int dbsize,
-                        const struct fb_videomode *default_mode,
-                        unsigned int default_bpp)
+  int __init fb_find_mode(struct fb_var_screeninfo *var,
+			  struct fb_info *info, const char *mode_option,
+			  const struct fb_videomode *db, unsigned int dbsize,
+			  const struct fb_videomode *default_mode,
+			  unsigned int default_bpp)
 
 with db/dbsize your non-standard video mode database, or NULL to use the
 standard video mode database.
@@ -127,12 +130,13 @@ fb_find_mode() first tries the specified video mode (or any mode that matches,
 e.g. there can be multiple 640x480 modes, each of them is tried). If that
 fails, the default mode is tried. If that fails, it walks over all modes.
 
-To specify a video mode at bootup, use the following boot options:
+To specify a video mode at bootup, use the following boot options::
+
     video=<driver>:<xres>x<yres>[-<bpp>][@refresh]
 
 where <driver> is a name from the table below.  Valid default modes can be
 found in linux/drivers/video/modedb.c.  Check your driver's documentation.
-There may be more modes.
+There may be more modes::
 
     Drivers that support modedb boot options
     Boot Name	  Cards Supported
diff --git a/Documentation/fb/pvr2fb.rst b/Documentation/fb/pvr2fb.rst
new file mode 100644
index 000000000000..fcf2c21c8fcf
--- /dev/null
+++ b/Documentation/fb/pvr2fb.rst
@@ -0,0 +1,66 @@
+===============
+What is pvr2fb?
+===============
+
+This is a driver for PowerVR 2 based graphics frame buffers, such as the
+one found in the Dreamcast.
+
+Advantages:
+
+ * It provides a nice large console (128 cols + 48 lines with 1024x768)
+   without using tiny, unreadable fonts (NOT on the Dreamcast)
+ * You can run XF86_FBDev on top of /dev/fb0
+ * Most important: boot logo :-)
+
+Disadvantages:
+
+ * Driver is largely untested on non-Dreamcast systems.
+
+Configuration
+=============
+
+You can pass kernel command line options to pvr2fb with
+`video=pvr2fb:option1,option2:value2,option3` (multiple options should be
+separated by comma, values are separated from options by `:`).
+
+Accepted options:
+
+==========  ==================================================================
+font:X      default font to use. All fonts are supported, including the
+	    SUN12x22 font which is very nice at high resolutions.
+
+
+mode:X      default video mode with format [xres]x[yres]-<bpp>@<refresh rate>
+	    The following video modes are supported:
+	    640x640-16@60, 640x480-24@60, 640x480-32@60. The Dreamcast
+	    defaults to 640x480-16@60. At the time of writing the
+	    24bpp and 32bpp modes function poorly. Work to fix that is
+	    ongoing
+
+	    Note: the 640x240 mode is currently broken, and should not be
+	    used for any reason. It is only mentioned here as a reference.
+
+inverse     invert colors on screen (for LCD displays)
+
+nomtrr      disables write combining on frame buffer. This slows down driver
+	    but there is reported minor incompatibility between GUS DMA and
+	    XFree under high loads if write combining is enabled (sound
+	    dropouts). MTRR is enabled by default on systems that have it
+	    configured and that support it.
+
+cable:X     cable type. This can be any of the following: vga, rgb, and
+	    composite. If none is specified, we guess.
+
+output:X    output type. This can be any of the following: pal, ntsc, and
+	    vga. If none is specified, we guess.
+==========  ==================================================================
+
+X11
+===
+
+XF86_FBDev has been shown to work on the Dreamcast in the past - though not yet
+on any 2.6 series kernel.
+
+Paul Mundt <lethal@linuxdc.org>
+
+Updated by Adrian McMenamin <adrian@mcmen.demon.co.uk>
diff --git a/Documentation/fb/pvr2fb.txt b/Documentation/fb/pvr2fb.txt
deleted file mode 100644
index 36bdeff585e2..000000000000
--- a/Documentation/fb/pvr2fb.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-$Id: pvr2fb.txt,v 1.1 2001/05/24 05:09:16 mrbrown Exp $
-
-What is pvr2fb?
-===============
-
-This is a driver for PowerVR 2 based graphics frame buffers, such as the
-one found in the Dreamcast.
-
-Advantages:
-
- * It provides a nice large console (128 cols + 48 lines with 1024x768)
-   without using tiny, unreadable fonts (NOT on the Dreamcast)
- * You can run XF86_FBDev on top of /dev/fb0
- * Most important: boot logo :-)
-
-Disadvantages:
-
- * Driver is largely untested on non-Dreamcast systems.
-
-Configuration
-=============
-
-You can pass kernel command line options to pvr2fb with
-`video=pvr2fb:option1,option2:value2,option3' (multiple options should be
-separated by comma, values are separated from options by `:').
-Accepted options:
-
-font:X    - default font to use. All fonts are supported, including the
-            SUN12x22 font which is very nice at high resolutions.
-
-	    
-mode:X    - default video mode with format [xres]x[yres]-<bpp>@<refresh rate>
-            The following video modes are supported:
-            640x640-16@60, 640x480-24@60, 640x480-32@60. The Dreamcast
-            defaults to 640x480-16@60. At the time of writing the
-            24bpp and 32bpp modes function poorly. Work to fix that is
-            ongoing
-
-            Note: the 640x240 mode is currently broken, and should not be
-            used for any reason. It is only mentioned here as a reference.
-
-inverse   - invert colors on screen (for LCD displays)
-
-nomtrr    - disables write combining on frame buffer. This slows down driver
-            but there is reported minor incompatibility between GUS DMA and
-            XFree under high loads if write combining is enabled (sound
-            dropouts). MTRR is enabled by default on systems that have it
-            configured and that support it.
-
-cable:X   - cable type. This can be any of the following: vga, rgb, and
-            composite. If none is specified, we guess.
-
-output:X  - output type. This can be any of the following: pal, ntsc, and
-            vga. If none is specified, we guess.
-
-X11
-===
-
-XF86_FBDev has been shown to work on the Dreamcast in the past - though not yet
-on any 2.6 series kernel.
-
---
-Paul Mundt <lethal@linuxdc.org>
-Updated by Adrian McMenamin <adrian@mcmen.demon.co.uk>
-
diff --git a/Documentation/fb/pxafb.txt b/Documentation/fb/pxafb.rst
similarity index 78%
rename from Documentation/fb/pxafb.txt
rename to Documentation/fb/pxafb.rst
index d143a0a749f9..90177f5e7e76 100644
--- a/Documentation/fb/pxafb.txt
+++ b/Documentation/fb/pxafb.rst
@@ -1,59 +1,82 @@
+================================
 Driver for PXA25x LCD controller
 ================================
 
 The driver supports the following options, either via
 options=<OPTIONS> when modular or video=pxafb:<OPTIONS> when built in.
 
-For example:
+For example::
+
 	modprobe pxafb options=vmem:2M,mode:640x480-8,passive
-or on the kernel command line
+
+or on the kernel command line::
+
 	video=pxafb:vmem:2M,mode:640x480-8,passive
 
 vmem: VIDEO_MEM_SIZE
+
 	Amount of video memory to allocate (can be suffixed with K or M
 	for kilobytes or megabytes)
 
 mode:XRESxYRES[-BPP]
+
 	XRES == LCCR1_PPL + 1
+
 	YRES == LLCR2_LPP + 1
+
 		The resolution of the display in pixels
+
 	BPP == The bit depth. Valid values are 1, 2, 4, 8 and 16.
 
 pixclock:PIXCLOCK
+
 	Pixel clock in picoseconds
 
 left:LEFT == LCCR1_BLW + 1
+
 right:RIGHT == LCCR1_ELW + 1
+
 hsynclen:HSYNC == LCCR1_HSW + 1
+
 upper:UPPER == LCCR2_BFW
+
 lower:LOWER == LCCR2_EFR
+
 vsynclen:VSYNC == LCCR2_VSW + 1
+
 	Display margins and sync times
 
 color | mono => LCCR0_CMS
+
 	umm...
 
 active | passive => LCCR0_PAS
+
 	Active (TFT) or Passive (STN) display
 
 single | dual => LCCR0_SDS
+
 	Single or dual panel passive display
 
 4pix | 8pix => LCCR0_DPD
+
 	4 or 8 pixel monochrome single panel data
 
-hsync:HSYNC
-vsync:VSYNC
+hsync:HSYNC, vsync:VSYNC
+
 	Horizontal and vertical sync. 0 => active low, 1 => active
 	high.
 
 dpc:DPC
+
 	Double pixel clock. 1=>true, 0=>false
 
 outputen:POLARITY
+
 	Output Enable Polarity. 0 => active low, 1 => active high
 
 pixclockpol:POLARITY
+
 	pixel clock polarity
 	0 => falling edge, 1 => rising edge
 
@@ -76,44 +99,50 @@ Overlay Support for PXA27x and later LCD controllers
      not for such purpose).
 
   2. overlay framebuffer is allocated dynamically according to specified
-     'struct fb_var_screeninfo', the amount is decided by:
+     'struct fb_var_screeninfo', the amount is decided by::
 
-        var->xres_virtual * var->yres_virtual * bpp
+	var->xres_virtual * var->yres_virtual * bpp
 
      bpp = 16 -- for RGB565 or RGBT555
-         = 24 -- for YUV444 packed
-         = 24 -- for YUV444 planar
-	 = 16 -- for YUV422 planar (1 pixel = 1 Y + 1/2 Cb + 1/2 Cr)
-	 = 12 -- for YUV420 planar (1 pixel = 1 Y + 1/4 Cb + 1/4 Cr)
+
+     bpp = 24 -- for YUV444 packed
+
+     bpp = 24 -- for YUV444 planar
+
+     bpp = 16 -- for YUV422 planar (1 pixel = 1 Y + 1/2 Cb + 1/2 Cr)
+
+     bpp = 12 -- for YUV420 planar (1 pixel = 1 Y + 1/4 Cb + 1/4 Cr)
 
      NOTE:
 
      a. overlay does not support panning in x-direction, thus
-        var->xres_virtual will always be equal to var->xres
+	var->xres_virtual will always be equal to var->xres
 
      b. line length of overlay(s) must be on a 32-bit word boundary,
-        for YUV planar modes, it is a requirement for the component
+	for YUV planar modes, it is a requirement for the component
 	with minimum bits per pixel,  e.g. for YUV420, Cr component
 	for one pixel is actually 2-bits, it means the line length
 	should be a multiple of 16-pixels
 
      c. starting horizontal position (XPOS) should start on a 32-bit
-        word boundary, otherwise the fb_check_var() will just fail.
+	word boundary, otherwise the fb_check_var() will just fail.
 
      d. the rectangle of the overlay should be within the base plane,
-        otherwise fail
+	otherwise fail
 
      Applications should follow the sequence below to operate an overlay
      framebuffer:
 
-         a. open("/dev/fb[1-2]", ...)
+	 a. open("/dev/fb[1-2]", ...)
 	 b. ioctl(fd, FBIOGET_VSCREENINFO, ...)
 	 c. modify 'var' with desired parameters:
+
 	    1) var->xres and var->yres
 	    2) larger var->yres_virtual if more memory is required,
 	       usually for double-buffering
 	    3) var->nonstd for starting (x, y) and color format
 	    4) var->{red, green, blue, transp} if RGB mode is to be used
+
 	 d. ioctl(fd, FBIOPUT_VSCREENINFO, ...)
 	 e. ioctl(fd, FBIOGET_FSCREENINFO, ...)
 	 f. mmap
@@ -124,19 +153,21 @@ Overlay Support for PXA27x and later LCD controllers
      and lengths of each component within the framebuffer.
 
   4. var->nonstd is used to pass starting (x, y) position and color format,
-     the detailed bit fields are shown below:
+     the detailed bit fields are shown below::
 
-    31                23  20         10          0
-     +-----------------+---+----------+----------+
-     |  ... unused ... |FOR|   XPOS   |   YPOS   |
-     +-----------------+---+----------+----------+
+      31                23  20         10          0
+       +-----------------+---+----------+----------+
+       |  ... unused ... |FOR|   XPOS   |   YPOS   |
+       +-----------------+---+----------+----------+
 
      FOR  - color format, as defined by OVERLAY_FORMAT_* in pxafb.h
-            0 - RGB
-	    1 - YUV444 PACKED
-	    2 - YUV444 PLANAR
-	    3 - YUV422 PLANAR
-	    4 - YUR420 PLANAR
+
+	  - 0 - RGB
+	  - 1 - YUV444 PACKED
+	  - 2 - YUV444 PLANAR
+	  - 3 - YUV422 PLANAR
+	  - 4 - YUR420 PLANAR
 
      XPOS - starting horizontal position
+
      YPOS - starting vertical position
diff --git a/Documentation/fb/s3fb.txt b/Documentation/fb/s3fb.rst
similarity index 94%
rename from Documentation/fb/s3fb.txt
rename to Documentation/fb/s3fb.rst
index 2c97770bdbaa..e809d69c21a7 100644
--- a/Documentation/fb/s3fb.txt
+++ b/Documentation/fb/s3fb.rst
@@ -1,6 +1,6 @@
-
-	s3fb - fbdev driver for S3 Trio/Virge chips
-	===========================================
+===========================================
+s3fb - fbdev driver for S3 Trio/Virge chips
+===========================================
 
 
 Supported Hardware
@@ -56,7 +56,7 @@ Missing Features
 (alias TODO list)
 
 	* secondary (not initialized by BIOS) device support
-   	* big endian support
+	* big endian support
 	* Zorro bus support
 	* MMIO support
 	* 24 bpp mode support on more cards
diff --git a/Documentation/fb/sa1100fb.txt b/Documentation/fb/sa1100fb.rst
similarity index 64%
rename from Documentation/fb/sa1100fb.txt
rename to Documentation/fb/sa1100fb.rst
index f1b4220464df..67e2650e017d 100644
--- a/Documentation/fb/sa1100fb.txt
+++ b/Documentation/fb/sa1100fb.rst
@@ -1,17 +1,19 @@
-[This file is cloned from VesaFB/matroxfb]
-
+=================
 What is sa1100fb?
 =================
 
+.. [This file is cloned from VesaFB/matroxfb]
+
+
 This is a driver for a graphic framebuffer for the SA-1100 LCD
 controller.
 
 Configuration
 ==============
 
-For most common passive displays, giving the option
+For most common passive displays, giving the option::
 
-video=sa1100fb:bpp:<value>,lccr0:<value>,lccr1:<value>,lccr2:<value>,lccr3:<value>
+  video=sa1100fb:bpp:<value>,lccr0:<value>,lccr1:<value>,lccr2:<value>,lccr3:<value>
 
 on the kernel command line should be enough to configure the
 controller. The bits per pixel (bpp) value should be 4, 8, 12, or
@@ -27,13 +29,12 @@ sa1100fb_init_fbinfo(), sa1100fb_activate_var(),
 sa1100fb_disable_lcd_controller(), and sa1100fb_enable_lcd_controller()
 will probably be necessary.
 
-Accepted options:
+Accepted options::
 
-bpp:<value>	Configure for <value> bits per pixel
-lccr0:<value>	Configure LCD control register 0 (11.7.3)
-lccr1:<value>	Configure LCD control register 1 (11.7.4)
-lccr2:<value>	Configure LCD control register 2 (11.7.5)
-lccr3:<value>	Configure LCD control register 3 (11.7.6)
+	bpp:<value>	Configure for <value> bits per pixel
+	lccr0:<value>	Configure LCD control register 0 (11.7.3)
+	lccr1:<value>	Configure LCD control register 1 (11.7.4)
+	lccr2:<value>	Configure LCD control register 2 (11.7.5)
+	lccr3:<value>	Configure LCD control register 3 (11.7.6)
 
---
 Mark Huang <mhuang@livetoy.com>
diff --git a/Documentation/fb/sh7760fb.rst b/Documentation/fb/sh7760fb.rst
new file mode 100644
index 000000000000..c3266485f810
--- /dev/null
+++ b/Documentation/fb/sh7760fb.rst
@@ -0,0 +1,130 @@
+================================================
+SH7760/SH7763 integrated LCDC Framebuffer driver
+================================================
+
+0. Overview
+-----------
+The SH7760/SH7763 have an integrated LCD Display controller (LCDC) which
+supports (in theory) resolutions ranging from 1x1 to 1024x1024,
+with color depths ranging from 1 to 16 bits, on STN, DSTN and TFT Panels.
+
+Caveats:
+
+* Framebuffer memory must be a large chunk allocated at the top
+  of Area3 (HW requirement). Because of this requirement you should NOT
+  make the driver a module since at runtime it may become impossible to
+  get a large enough contiguous chunk of memory.
+
+* The driver does not support changing resolution while loaded
+  (displays aren't hotpluggable anyway)
+
+* Heavy flickering may be observed
+  a) if you're using 15/16bit color modes at >= 640x480 px resolutions,
+  b) during PCMCIA (or any other slow bus) activity.
+
+* Rotation works only 90degress clockwise, and only if horizontal
+  resolution is <= 320 pixels.
+
+Files:
+	- drivers/video/sh7760fb.c
+	- include/asm-sh/sh7760fb.h
+	- Documentation/fb/sh7760fb.rst
+
+1. Platform setup
+-----------------
+SH7760:
+ Video data is fetched via the DMABRG DMA engine, so you have to
+ configure the SH DMAC for DMABRG mode (write 0x94808080 to the
+ DMARSRA register somewhere at boot).
+
+ PFC registers PCCR and PCDR must be set to peripheral mode.
+ (write zeros to both).
+
+The driver does NOT do the above for you since board setup is, well, job
+of the board setup code.
+
+2. Panel definitions
+--------------------
+The LCDC must explicitly be told about the type of LCD panel
+attached.  Data must be wrapped in a "struct sh7760fb_platdata" and
+passed to the driver as platform_data.
+
+Suggest you take a closer look at the SH7760 Manual, Section 30.
+(http://documentation.renesas.com/eng/products/mpumcu/e602291_sh7760.pdf)
+
+The following code illustrates what needs to be done to
+get the framebuffer working on a 640x480 TFT::
+
+  #include <linux/fb.h>
+  #include <asm/sh7760fb.h>
+
+  /*
+   * NEC NL6440bc26-01 640x480 TFT
+   * dotclock 25175 kHz
+   * Xres                640     Yres            480
+   * Htotal      800     Vtotal          525
+   * HsynStart   656     VsynStart       490
+   * HsynLenn    30      VsynLenn        2
+   *
+   * The linux framebuffer layer does not use the syncstart/synclen
+   * values but right/left/upper/lower margin values. The comments
+   * for the x_margin explain how to calculate those from given
+   * panel sync timings.
+   */
+  static struct fb_videomode nl6448bc26 = {
+         .name           = "NL6448BC26",
+         .refresh        = 60,
+         .xres           = 640,
+         .yres           = 480,
+         .pixclock       = 39683,        /* in picoseconds! */
+         .hsync_len      = 30,
+         .vsync_len      = 2,
+         .left_margin    = 114,  /* HTOT - (HSYNSLEN + HSYNSTART) */
+         .right_margin   = 16,   /* HSYNSTART - XRES */
+         .upper_margin   = 33,   /* VTOT - (VSYNLEN + VSYNSTART) */
+         .lower_margin   = 10,   /* VSYNSTART - YRES */
+         .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+         .vmode          = FB_VMODE_NONINTERLACED,
+         .flag           = 0,
+  };
+
+  static struct sh7760fb_platdata sh7760fb_nl6448 = {
+         .def_mode       = &nl6448bc26,
+         .ldmtr          = LDMTR_TFT_COLOR_16,   /* 16bit TFT panel */
+         .lddfr          = LDDFR_8BPP,           /* we want 8bit output */
+         .ldpmmr         = 0x0070,
+         .ldpspr         = 0x0500,
+         .ldaclnr        = 0,
+         .ldickr         = LDICKR_CLKSRC(LCDC_CLKSRC_EXTERNAL) |
+			 LDICKR_CLKDIV(1),
+         .rotate         = 0,
+         .novsync        = 1,
+         .blank          = NULL,
+  };
+
+  /* SH7760:
+   * 0xFE300800: 256 * 4byte xRGB palette ram
+   * 0xFE300C00: 42 bytes ctrl registers
+   */
+  static struct resource sh7760_lcdc_res[] = {
+         [0] = {
+	       .start  = 0xFE300800,
+	       .end    = 0xFE300CFF,
+	       .flags  = IORESOURCE_MEM,
+         },
+         [1] = {
+	       .start  = 65,
+	       .end    = 65,
+	       .flags  = IORESOURCE_IRQ,
+         },
+  };
+
+  static struct platform_device sh7760_lcdc_dev = {
+         .dev    = {
+	       .platform_data = &sh7760fb_nl6448,
+         },
+         .name           = "sh7760-lcdc",
+         .id             = -1,
+         .resource       = sh7760_lcdc_res,
+         .num_resources  = ARRAY_SIZE(sh7760_lcdc_res),
+  };
diff --git a/Documentation/fb/sh7760fb.txt b/Documentation/fb/sh7760fb.txt
deleted file mode 100644
index b994c3b10549..000000000000
--- a/Documentation/fb/sh7760fb.txt
+++ /dev/null
@@ -1,131 +0,0 @@
-SH7760/SH7763 integrated LCDC Framebuffer driver
-================================================
-
-0. Overview
------------
-The SH7760/SH7763 have an integrated LCD Display controller (LCDC) which
-supports (in theory) resolutions ranging from 1x1 to 1024x1024,
-with color depths ranging from 1 to 16 bits, on STN, DSTN and TFT Panels.
-
-Caveats:
-* Framebuffer memory must be a large chunk allocated at the top
-  of Area3 (HW requirement). Because of this requirement you should NOT
-  make the driver a module since at runtime it may become impossible to
-  get a large enough contiguous chunk of memory.
-
-* The driver does not support changing resolution while loaded
-  (displays aren't hotpluggable anyway)
-
-* Heavy flickering may be observed
-  a) if you're using 15/16bit color modes at >= 640x480 px resolutions,
-  b) during PCMCIA (or any other slow bus) activity.
-
-* Rotation works only 90degress clockwise, and only if horizontal
-  resolution is <= 320 pixels.
-
-files:   drivers/video/sh7760fb.c
-        include/asm-sh/sh7760fb.h
-        Documentation/fb/sh7760fb.txt
-
-1. Platform setup
------------------
-SH7760:
- Video data is fetched via the DMABRG DMA engine, so you have to
- configure the SH DMAC for DMABRG mode (write 0x94808080 to the
- DMARSRA register somewhere at boot).
-
- PFC registers PCCR and PCDR must be set to peripheral mode.
- (write zeros to both).
-
-The driver does NOT do the above for you since board setup is, well, job
-of the board setup code.
-
-2. Panel definitions
---------------------
-The LCDC must explicitly be told about the type of LCD panel
-attached.  Data must be wrapped in a "struct sh7760fb_platdata" and
-passed to the driver as platform_data.
-
-Suggest you take a closer look at the SH7760 Manual, Section 30.
-(http://documentation.renesas.com/eng/products/mpumcu/e602291_sh7760.pdf)
-
-The following code illustrates what needs to be done to
-get the framebuffer working on a 640x480 TFT:
-
-====================== cut here ======================================
-
-#include <linux/fb.h>
-#include <asm/sh7760fb.h>
-
-/*
- * NEC NL6440bc26-01 640x480 TFT
- * dotclock 25175 kHz
- * Xres                640     Yres            480
- * Htotal      800     Vtotal          525
- * HsynStart   656     VsynStart       490
- * HsynLenn    30      VsynLenn        2
- *
- * The linux framebuffer layer does not use the syncstart/synclen
- * values but right/left/upper/lower margin values. The comments
- * for the x_margin explain how to calculate those from given
- * panel sync timings.
- */
-static struct fb_videomode nl6448bc26 = {
-       .name           = "NL6448BC26",
-       .refresh        = 60,
-       .xres           = 640,
-       .yres           = 480,
-       .pixclock       = 39683,        /* in picoseconds! */
-       .hsync_len      = 30,
-       .vsync_len      = 2,
-       .left_margin    = 114,  /* HTOT - (HSYNSLEN + HSYNSTART) */
-       .right_margin   = 16,   /* HSYNSTART - XRES */
-       .upper_margin   = 33,   /* VTOT - (VSYNLEN + VSYNSTART) */
-       .lower_margin   = 10,   /* VSYNSTART - YRES */
-       .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-       .vmode          = FB_VMODE_NONINTERLACED,
-       .flag           = 0,
-};
-
-static struct sh7760fb_platdata sh7760fb_nl6448 = {
-       .def_mode       = &nl6448bc26,
-       .ldmtr          = LDMTR_TFT_COLOR_16,   /* 16bit TFT panel */
-       .lddfr          = LDDFR_8BPP,           /* we want 8bit output */
-       .ldpmmr         = 0x0070,
-       .ldpspr         = 0x0500,
-       .ldaclnr        = 0,
-       .ldickr         = LDICKR_CLKSRC(LCDC_CLKSRC_EXTERNAL) |
-                         LDICKR_CLKDIV(1),
-       .rotate         = 0,
-       .novsync        = 1,
-       .blank          = NULL,
-};
-
-/* SH7760:
- * 0xFE300800: 256 * 4byte xRGB palette ram
- * 0xFE300C00: 42 bytes ctrl registers
- */
-static struct resource sh7760_lcdc_res[] = {
-       [0] = {
-               .start  = 0xFE300800,
-               .end    = 0xFE300CFF,
-               .flags  = IORESOURCE_MEM,
-       },
-       [1] = {
-               .start  = 65,
-               .end    = 65,
-               .flags  = IORESOURCE_IRQ,
-       },
-};
-
-static struct platform_device sh7760_lcdc_dev = {
-       .dev    = {
-               .platform_data = &sh7760fb_nl6448,
-       },
-       .name           = "sh7760-lcdc",
-       .id             = -1,
-       .resource       = sh7760_lcdc_res,
-       .num_resources  = ARRAY_SIZE(sh7760_lcdc_res),
-};
-
-====================== cut here ======================================
diff --git a/Documentation/fb/sisfb.txt b/Documentation/fb/sisfb.rst
similarity index 85%
rename from Documentation/fb/sisfb.txt
rename to Documentation/fb/sisfb.rst
index 2e68e503e72f..8f4e502ea12e 100644
--- a/Documentation/fb/sisfb.txt
+++ b/Documentation/fb/sisfb.rst
@@ -1,4 +1,4 @@
-
+==============
 What is sisfb?
 ==============
 
@@ -41,11 +41,11 @@ statement to add the parameters to the kernel command line. Please see lilo's
 parameters are given with the modprobe (or insmod) command.
 
 Example for sisfb as part of the static kernel: Add the following line to your
-lilo.conf:
+lilo.conf::
 
      append="video=sisfb:mode:1024x768x16,mem:12288,rate:75"
 
-Example for sisfb as a module: Start sisfb by typing
+Example for sisfb as a module: Start sisfb by typing::
 
      modprobe sisfb mode=1024x768x16 rate=75 mem=12288
 
@@ -57,7 +57,7 @@ described above or the vesa keyword instead of mode). If compiled as a module,
 the parameter format reads mode=none or mode=1024x768x16 (or whatever mode you
 want to use). Using a "=" for a ":" (and vice versa) is a huge difference!
 Additionally: If you give more than one argument to the in-kernel sisfb, the
-arguments are separated with ",". For example:
+arguments are separated with ",". For example::
 
    video=sisfb:mode:1024x768x16,rate:75,mem:12288
 
@@ -73,6 +73,7 @@ supported options including some explanation.
 
 The desired display mode can be specified using the keyword "mode" with
 a parameter in one of the following formats:
+
   - XxYxDepth or
   - XxY-Depth or
   - XxY-Depth@Rate or
@@ -130,29 +131,30 @@ Configuration
 
 (Some) accepted options:
 
-off      - Disable sisfb. This option is only understood if sisfb is
-           in-kernel, not a module.
-mem:X    - size of memory for the console, rest will be used for DRI/DRM. X
-           is in kilobytes. On 300 series, the default is 4096, 8192 or
+=========  ==================================================================
+off        Disable sisfb. This option is only understood if sisfb is
+	   in-kernel, not a module.
+mem:X      size of memory for the console, rest will be used for DRI/DRM. X
+	   is in kilobytes. On 300 series, the default is 4096, 8192 or
 	   16384 (each in kilobyte) depending on how much video ram the card
-           has. On 315/330 series, the default is the maximum available ram
+	   has. On 315/330 series, the default is the maximum available ram
 	   (since DRI/DRM is not supported for these chipsets).
-noaccel  - do not use 2D acceleration engine. (Default: use acceleration)
-noypan   - disable y-panning and scroll by redrawing the entire screen.
-           This is much slower than y-panning. (Default: use y-panning)
-vesa:X   - selects startup videomode. X is number from 0 to 0x1FF and
-           represents the VESA mode number (can be given in decimal or
+noaccel    do not use 2D acceleration engine. (Default: use acceleration)
+noypan     disable y-panning and scroll by redrawing the entire screen.
+	   This is much slower than y-panning. (Default: use y-panning)
+vesa:X     selects startup videomode. X is number from 0 to 0x1FF and
+	   represents the VESA mode number (can be given in decimal or
 	   hexadecimal form, the latter prefixed with "0x").
-mode:X   - selects startup videomode. Please see above for the format of
-           "X".
+mode:X     selects startup videomode. Please see above for the format of
+	   "X".
+=========  ==================================================================
 
 Boolean options such as "noaccel" or "noypan" are to be given without a
 parameter if sisfb is in-kernel (for example "video=sisfb:noypan). If
 sisfb is a module, these are to be set to 1 (for example "modprobe sisfb
 noypan=1").
 
---
+
 Thomas Winischhofer <thomas@winischhofer.net>
+
 May 27, 2004
-
-
diff --git a/Documentation/fb/sm501.txt b/Documentation/fb/sm501.rst
similarity index 65%
rename from Documentation/fb/sm501.txt
rename to Documentation/fb/sm501.rst
index 187f3b3ccb6c..03e02c8042a7 100644
--- a/Documentation/fb/sm501.txt
+++ b/Documentation/fb/sm501.rst
@@ -1,6 +1,11 @@
+=======
+sm501fb
+=======
+
 Configuration:
 
-You can pass the following kernel command line options to sm501 videoframebuffer:
+You can pass the following kernel command line options to sm501
+videoframebuffer::
 
 	sm501fb.bpp=	SM501 Display driver:
 			Specify bits-per-pixel if not specified by 'mode'
diff --git a/Documentation/fb/sm712fb.txt b/Documentation/fb/sm712fb.rst
similarity index 59%
rename from Documentation/fb/sm712fb.txt
rename to Documentation/fb/sm712fb.rst
index c388442edf51..994dad3b0238 100644
--- a/Documentation/fb/sm712fb.txt
+++ b/Documentation/fb/sm712fb.rst
@@ -1,5 +1,6 @@
+================
 What is sm712fb?
-=================
+================
 
 This is a graphics framebuffer driver for Silicon Motion SM712 based processors.
 
@@ -15,13 +16,16 @@ You should not compile-in vesafb.
 
 Currently supported video modes are:
 
-[Graphic modes]
+Graphic modes
+-------------
 
-bpp | 640x480  800x600  1024x768  1280x1024
-----+--------------------------------------------
-  8 | 0x301    0x303    0x305    0x307
- 16 | 0x311    0x314    0x317    0x31A
- 24 | 0x312    0x315    0x318    0x31B
+===  =======  =======  ========  =========
+bpp  640x480  800x600  1024x768  1280x1024
+===  =======  =======  ========  =========
+  8  0x301    0x303    0x305     0x307
+ 16  0x311    0x314    0x317     0x31A
+ 24  0x312    0x315    0x318     0x31B
+===  =======  =======  ========  =========
 
 Missing Features
 ================
diff --git a/Documentation/fb/sstfb.rst b/Documentation/fb/sstfb.rst
new file mode 100644
index 000000000000..8e8c1b940359
--- /dev/null
+++ b/Documentation/fb/sstfb.rst
@@ -0,0 +1,207 @@
+=====
+sstfb
+=====
+
+Introduction
+============
+
+This is a frame buffer device driver for 3dfx' Voodoo Graphics
+(aka voodoo 1, aka sst1) and Voodoo² (aka Voodoo 2, aka CVG) based
+video boards. It's highly experimental code, but is guaranteed to work
+on my computer, with my "Maxi Gamer 3D" and "Maxi Gamer 3d²" boards,
+and with me "between chair and keyboard". Some people tested other
+combinations and it seems that it works.
+The main page is located at <http://sstfb.sourceforge.net>, and if
+you want the latest version, check out the CVS, as the driver is a work
+in progress, I feel uncomfortable with releasing tarballs of something
+not completely working...Don't worry, it's still more than usable
+(I eat my own dog food)
+
+Please read the Bug section, and report any success or failure to me
+(Ghozlane Toumi <gtoumi@laposte.net>).
+BTW, If you have only one monitor , and you don't feel like playing
+with the vga passthrou cable, I can only suggest borrowing a screen
+somewhere...
+
+
+Installation
+============
+
+This driver (should) work on ix86, with "late" 2.2.x kernel (tested
+with x = 19) and "recent" 2.4.x kernel, as a module or compiled in.
+It has been included in mainstream kernel since the infamous 2.4.10.
+You can apply the patches found in `sstfb/kernel/*-2.{2|4}.x.patch`,
+and copy sstfb.c to linux/drivers/video/, or apply a single patch,
+`sstfb/patch-2.{2|4}.x-sstfb-yymmdd` to your linux source tree.
+
+Then configure your kernel as usual: choose "m" or "y" to 3Dfx Voodoo
+Graphics in section "console". Compile, install, have fun... and please
+drop me a report :)
+
+
+Module Usage
+============
+
+.. warning::
+
+       #. You should read completely this section before issuing any command.
+
+       #. If you have only one monitor to play with, once you insmod the
+	  module, the 3dfx takes control of the output, so you'll have to
+	  plug the monitor to the "normal" video board in order to issue
+	  the commands, or you can blindly use sst_dbg_vgapass
+	  in the tools directory (See Tools). The latest solution is pass the
+	  parameter vgapass=1 when insmodding the driver. (See Kernel/Modules
+	  Options)
+
+Module insertion
+----------------
+
+       #. insmod sstfb.o
+
+	  you should see some strange output from the board:
+	  a big blue square, a green and a red small squares and a vertical
+	  white rectangle. why? the function's name is self-explanatory:
+	  "sstfb_test()"...
+	  (if you don't have a second monitor, you'll have to plug your monitor
+	  directly to the 2D videocard to see what you're typing)
+
+       #. con2fb /dev/fbx /dev/ttyx
+
+	  bind a tty to the new frame buffer. if you already have a frame
+	  buffer driver, the voodoo fb will likely be /dev/fb1. if not,
+	  the device will be /dev/fb0. You can check this by doing a
+	  cat /proc/fb. You can find a copy of con2fb in tools/ directory.
+	  if you don't have another fb device, this step is superfluous,
+	  as the console subsystem automagicaly binds ttys to the fb.
+       #. switch to the virtual console you just mapped. "tadaaa" ...
+
+Module removal
+--------------
+
+       #. con2fb /dev/fbx /dev/ttyx
+
+	  bind the tty to the old frame buffer so the module can be removed.
+	  (how does it work with vgacon ? short answer : it doesn't work)
+
+       #. rmmod sstfb
+
+
+Kernel/Modules Options
+----------------------
+
+You can pass some options to the sstfb module, and via the kernel
+command line when the driver is compiled in:
+for module : insmod sstfb.o option1=value1 option2=value2 ...
+in kernel :  video=sstfb:option1,option2:value2,option3 ...
+
+sstfb supports the following options:
+
+=============== =============== ===============================================
+Module		Kernel		Description
+=============== =============== ===============================================
+vgapass=0	vganopass	Enable or disable VGA passthrou cable.
+vgapass=1	vgapass		When enabled, the monitor will get the signal
+				from the VGA board and not from the voodoo.
+
+				Default: nopass
+
+mem=x		mem:x		Force frame buffer memory in MiB
+				allowed values: 0, 1, 2, 4.
+
+				Default: 0 (= autodetect)
+
+inverse=1	inverse		Supposed to enable inverse console.
+				doesn't work yet...
+
+clipping=1	clipping	Enable or disable clipping.
+clipping=0	noclipping	With clipping enabled, all offscreen
+				reads and writes are discarded.
+
+				Default: enable clipping.
+
+gfxclk=x	gfxclk:x	Force graphic clock frequency (in MHz).
+				Be careful with this option, it may be
+				DANGEROUS.
+
+				Default: auto
+
+					- 50Mhz for Voodoo 1,
+					- 75MHz for Voodoo 2.
+
+slowpci=1	fastpci		Enable or disable fast PCI read/writes.
+slowpci=1	slowpci		Default : fastpci
+
+dev=x		dev:x		Attach the driver to device number x.
+				0 is the first compatible board (in
+				lspci order)
+=============== =============== ===============================================
+
+Tools
+=====
+
+These tools are mostly for debugging purposes, but you can
+find some of these interesting:
+
+- `con2fb`, maps a tty to a fbramebuffer::
+
+	con2fb /dev/fb1 /dev/tty5
+
+- `sst_dbg_vgapass`, changes vga passthrou. You have to recompile the
+  driver with SST_DEBUG and SST_DEBUG_IOCTL set to 1::
+
+	sst_dbg_vgapass /dev/fb1 1 (enables vga cable)
+	sst_dbg_vgapass /dev/fb1 0 (disables vga cable)
+
+- `glide_reset`, resets the voodoo using glide
+  use this after rmmoding sstfb, if the module refuses to
+  reinsert.
+
+Bugs
+====
+
+- DO NOT use glide while the sstfb module is in, you'll most likely
+  hang your computer.
+- If you see some artefacts (pixels not cleaning and stuff like that),
+  try turning off clipping (clipping=0), and/or using slowpci
+- the driver don't detect the 4Mb frame buffer voodoos, it seems that
+  the 2 last Mbs wrap around. looking into that .
+- The driver is 16 bpp only, 24/32 won't work.
+- The driver is not your_favorite_toy-safe. this includes SMP...
+
+	[Actually from inspection it seems to be safe - Alan]
+
+- When using XFree86 FBdev (X over fbdev) you may see strange color
+  patterns at the border of your windows (the pixels lose the lowest
+  byte -> basically the blue component and some of the green). I'm unable
+  to reproduce this with XFree86-3.3, but one of the testers has this
+  problem with XFree86-4. Apparently recent Xfree86-4.x solve this
+  problem.
+- I didn't really test changing the palette, so you may find some weird
+  things when playing with that.
+- Sometimes the driver will not recognise the DAC, and the
+  initialisation will fail. This is specifically true for
+  voodoo 2 boards, but it should be solved in recent versions. Please
+  contact me.
+- The 24/32 is not likely to work anytime soon, knowing that the
+  hardware does ... unusual things in 24/32 bpp.
+- When used with another video board, current limitations of the linux
+  console subsystem can cause some troubles, specifically, you should
+  disable software scrollback, as it can oops badly ...
+
+Todo
+====
+
+- Get rid of the previous paragraph.
+- Buy more coffee.
+- test/port to other arch.
+- try to add panning using tweeks with front and back buffer .
+- try to implement accel on voodoo2, this board can actually do a
+  lot in 2D even if it was sold as a 3D only board ...
+
+Ghozlane Toumi <gtoumi@laposte.net>
+
+
+Date: 2002/05/09 20:11:45
+
+http://sstfb.sourceforge.net/README
diff --git a/Documentation/fb/sstfb.txt b/Documentation/fb/sstfb.txt
deleted file mode 100644
index 13db1075e4a5..000000000000
--- a/Documentation/fb/sstfb.txt
+++ /dev/null
@@ -1,174 +0,0 @@
-
-Introduction
-
-	  This is a frame buffer device driver for 3dfx' Voodoo Graphics 
-	(aka voodoo 1, aka sst1) and Voodoo² (aka Voodoo 2, aka CVG) based 
-	video boards. It's highly experimental code, but is guaranteed to work
-	on my computer, with my "Maxi Gamer 3D" and "Maxi Gamer 3d²" boards,
-	and with me "between chair and keyboard". Some people tested other
-	combinations and it seems that it works.
-	  The main page is located at <http://sstfb.sourceforge.net>, and if
-	you want the latest version, check out the CVS, as the driver is a work
-	in progress, I feel uncomfortable with releasing tarballs of something
-	not completely working...Don't worry, it's still more than usable
-	(I eat my own dog food)
-
-	  Please read the Bug section, and report any success or failure to me
-	(Ghozlane Toumi <gtoumi@laposte.net>).
-	  BTW, If you have only one monitor , and you don't feel like playing
-	with the vga passthrou cable, I can only suggest borrowing a screen
-	somewhere... 
-
-
-Installation 
-
-	  This driver (should) work on ix86, with "late" 2.2.x kernel (tested
-	with x = 19) and "recent" 2.4.x kernel, as a module or compiled in.
-	  It has been included in mainstream kernel since the infamous 2.4.10.
-	  You can apply the patches found in sstfb/kernel/*-2.{2|4}.x.patch,
-	and copy sstfb.c to linux/drivers/video/, or apply a single patch, 
-	sstfb/patch-2.{2|4}.x-sstfb-yymmdd to your linux source tree.
-
-	  Then configure your kernel as usual: choose "m" or "y" to 3Dfx Voodoo
-	Graphics in section "console". Compile, install, have fun... and please
-	drop me a report :)
-
-
-Module Usage
-	
-	Warnings.
-	# You should read completely this section before issuing any command.
-	# If you have only one monitor to play with, once you insmod the
-	  module, the 3dfx takes control of the output, so you'll have to
-	  plug the monitor to the "normal" video board in order to issue
-	  the commands, or you can blindly use sst_dbg_vgapass
-          in the tools directory (See Tools). The latest solution is pass the
-	  parameter vgapass=1 when insmodding the driver. (See Kernel/Modules
-	  Options)
-
-	Module insertion:
-	# insmod sstfb.o
-	  you should see some strange output from the board: 
-	  a big blue square, a green and a red small squares and a vertical
-	  white rectangle. why? the function's name is self-explanatory:
-	  "sstfb_test()"...
-	  (if you don't have a second monitor, you'll have to plug your monitor
-	  directly to the 2D videocard to see what you're typing)
-	# con2fb /dev/fbx /dev/ttyx
-	  bind a tty to the new frame buffer. if you already have a frame
-	  buffer driver, the voodoo fb will likely be /dev/fb1. if not, 
-	  the device will be /dev/fb0. You can check this by doing a 
-	  cat /proc/fb. You can find a copy of con2fb in tools/ directory.
-	  if you don't have another fb device, this step is superfluous,
-	  as the console subsystem automagicaly binds ttys to the fb.
-	# switch to the virtual console you just mapped. "tadaaa" ...
-
-	Module removal:
-	# con2fb /dev/fbx /dev/ttyx
-	  bind the tty to the old frame buffer so the module can be removed.
-	  (how does it work with vgacon ? short answer : it doesn't work)
-	# rmmod sstfb
-
-
-Kernel/Modules Options
-
-	You can pass some options to the sstfb module, and via the kernel 
-	command line when the driver is compiled in:
-	for module : insmod sstfb.o option1=value1 option2=value2 ...
-	in kernel :  video=sstfb:option1,option2:value2,option3 ...
-	
-	sstfb supports the following options :
-
-Module		Kernel		Description
-
-vgapass=0	vganopass	Enable or disable VGA passthrou cable.
-vgapass=1	vgapass		When enabled, the monitor will get the signal
-				from the VGA board and not from the voodoo.
-				Default: nopass
-
-mem=x		mem:x		Force frame buffer memory in MiB
-				allowed values: 0, 1, 2, 4.
-				Default: 0 (= autodetect)
-
-inverse=1	inverse		Supposed to enable inverse console.
-				doesn't work yet...
-
-clipping=1	clipping	Enable or disable clipping.
-clipping=0	noclipping	With clipping enabled, all offscreen
-				reads and writes are discarded.
-				Default: enable clipping.
-
-gfxclk=x	gfxclk:x	Force graphic clock frequency (in MHz).
-				Be careful with this option, it may be
-				DANGEROUS.
-				Default: auto 
-					50Mhz for Voodoo 1,
-					75MHz for Voodoo 2. 
-
-slowpci=1	fastpci		Enable or disable fast PCI read/writes.
-slowpci=1	slowpci		Default : fastpci
-
-dev=x		dev:x		Attach the driver to device number x.
-				0 is the first compatible board (in 
-				lspci order)
-
-Tools
-
-	These tools are mostly for debugging purposes, but you can 
-	find some of these interesting :
-	 - con2fb , maps a tty to a fbramebuffer .
-		con2fb /dev/fb1 /dev/tty5
-	 - sst_dbg_vgapass , changes vga passthrou. You have to recompile the
-	driver with SST_DEBUG and SST_DEBUG_IOCTL set to 1
-		sst_dbg_vgapass /dev/fb1 1 (enables vga cable)
-		sst_dbg_vgapass /dev/fb1 0 (disables vga cable)
-	 - glide_reset , resets the voodoo using glide
-		use this after rmmoding sstfb, if the module refuses to
-		reinsert .
-
-Bugs
-
-	- DO NOT use glide while the sstfb module is in, you'll most likely
-	hang your computer.
-	- If you see some artefacts (pixels not cleaning and stuff like that), 
-	try turning off clipping (clipping=0), and/or using slowpci
-	- the driver don't detect the 4Mb frame buffer voodoos, it seems that
-	the 2 last Mbs wrap around. looking into that .
-	- The driver is 16 bpp only, 24/32 won't work.
-	- The driver is not your_favorite_toy-safe. this includes SMP...
-          [Actually from inspection it seems to be safe - Alan]
-	- When using XFree86 FBdev (X over fbdev) you may see strange color
-	patterns at the border of your windows (the pixels lose the lowest
-	byte -> basically the blue component and some of the green). I'm unable
-	to reproduce this with XFree86-3.3, but one of the testers has this
-	problem with XFree86-4. Apparently recent Xfree86-4.x solve this
-	problem.
-	- I didn't really test changing the palette, so you may find some weird
-	things when playing with that.
-	- Sometimes the driver will not recognise the DAC, and the
-        initialisation will fail. This is specifically true for
-	voodoo 2 boards, but it should be solved in recent versions. Please
-	contact me.
-	- The 24/32 is not likely to work anytime soon, knowing that the
-	hardware does ... unusual things in 24/32 bpp.
-	- When used with another video board, current limitations of the linux
-	console subsystem can cause some troubles, specifically, you should
-	disable software scrollback, as it can oops badly ...
-
-Todo
-
-	- Get rid of the previous paragraph.
-	- Buy more coffee.
-	- test/port to other arch.
-	- try to add panning using tweeks with front and back buffer .
-	- try to implement accel on voodoo2, this board can actually do a 
-	  lot in 2D even if it was sold as a 3D only board ...
-
-ghoz.
-
--- 
-Ghozlane Toumi <gtoumi@laposte.net>
-
-
-$Date: 2002/05/09 20:11:45 $
-http://sstfb.sourceforge.net/README
diff --git a/Documentation/fb/tgafb.txt b/Documentation/fb/tgafb.rst
similarity index 71%
rename from Documentation/fb/tgafb.txt
rename to Documentation/fb/tgafb.rst
index 250083ada8fb..0c50d2134aa4 100644
--- a/Documentation/fb/tgafb.txt
+++ b/Documentation/fb/tgafb.rst
@@ -1,15 +1,14 @@
-$Id: tgafb.txt,v 1.1.2.2 2000/04/04 06:50:18 mato Exp $
-
+==============
 What is tgafb?
-===============
+==============
 
 This is a driver for DECChip 21030 based graphics framebuffers, a.k.a. TGA
 cards, which are usually found in older Digital Alpha systems. The
 following models are supported:
 
-ZLxP-E1 (8bpp, 2 MB VRAM)
-ZLxP-E2 (32bpp, 8 MB VRAM)
-ZLxP-E3 (32bpp, 16 MB VRAM, Zbuffer)
+- ZLxP-E1 (8bpp, 2 MB VRAM)
+- ZLxP-E2 (32bpp, 8 MB VRAM)
+- ZLxP-E3 (32bpp, 16 MB VRAM, Zbuffer)
 
 This version is an almost complete rewrite of the code written by Geert
 Uytterhoeven, which was based on the original TGA console code written by
@@ -18,7 +17,7 @@ Jay Estabrook.
 Major new features since Linux 2.0.x:
 
  * Support for multiple resolutions
- * Support for fixed-frequency and other oddball monitors 
+ * Support for fixed-frequency and other oddball monitors
    (by allowing the video mode to be set at boot time)
 
 User-visible changes since Linux 2.2.x:
@@ -36,19 +35,22 @@ Configuration
 =============
 
 You can pass kernel command line options to tgafb with
-`video=tgafb:option1,option2:value2,option3' (multiple options should be
-separated by comma, values are separated from options by `:').
+`video=tgafb:option1,option2:value2,option3` (multiple options should be
+separated by comma, values are separated from options by `:`).
+
 Accepted options:
 
-font:X    - default font to use. All fonts are supported, including the
-            SUN12x22 font which is very nice at high resolutions.
+==========  ============================================================
+font:X      default font to use. All fonts are supported, including the
+	    SUN12x22 font which is very nice at high resolutions.
 
-mode:X    - default video mode. The following video modes are supported:
-            640x480-60, 800x600-56, 640x480-72, 800x600-60, 800x600-72, 
+mode:X      default video mode. The following video modes are supported:
+	    640x480-60, 800x600-56, 640x480-72, 800x600-60, 800x600-72,
 	    1024x768-60, 1152x864-60, 1024x768-70, 1024x768-76,
 	    1152x864-70, 1280x1024-61, 1024x768-85, 1280x1024-70,
 	    1152x864-84, 1280x1024-76, 1280x1024-85
- 
+==========  ============================================================
+
 
 Known Issues
 ============
diff --git a/Documentation/fb/tridentfb.txt b/Documentation/fb/tridentfb.rst
similarity index 70%
rename from Documentation/fb/tridentfb.txt
rename to Documentation/fb/tridentfb.rst
index 45d9de5b13a3..7921c9dee78c 100644
--- a/Documentation/fb/tridentfb.txt
+++ b/Documentation/fb/tridentfb.rst
@@ -1,3 +1,7 @@
+=========
+Tridentfb
+=========
+
 Tridentfb is a framebuffer driver for some Trident chip based cards.
 
 The following list of chips is thought to be supported although not all are
@@ -17,6 +21,7 @@ limited comparing to the range if acceleration is disabled (see list
 of parameters below).
 
 Known bugs:
+
 1. The driver randomly locks up on 3DImage975 chip with acceleration
    enabled. The same happens in X11 (Xorg).
 2. The ramdac speeds require some more fine tuning. It is possible to
@@ -26,28 +31,30 @@ Known bugs:
 How to use it?
 ==============
 
-When booting you can pass the video parameter.
-video=tridentfb
+When booting you can pass the video parameter::
 
-The parameters for tridentfb are concatenated with a ':' as in this example.
+	video=tridentfb
 
-video=tridentfb:800x600-16@75,noaccel
+The parameters for tridentfb are concatenated with a ':' as in this example::
+
+	video=tridentfb:800x600-16@75,noaccel
 
 The second level parameters that tridentfb understands are:
 
-noaccel - turns off acceleration (when it doesn't work for your card)
+========  =====================================================================
+noaccel   turns off acceleration (when it doesn't work for your card)
 
-fp	- use flat panel related stuff
-crt 	- assume monitor is present instead of fp
+fp	  use flat panel related stuff
+crt 	  assume monitor is present instead of fp
 
-center 	- for flat panels and resolutions smaller than native size center the
+center 	  for flat panels and resolutions smaller than native size center the
 	  image, otherwise use
 stretch
 
-memsize - integer value in KB, use if your card's memory size is misdetected.
+memsize   integer value in KB, use if your card's memory size is misdetected.
 	  look at the driver output to see what it says when initializing.
 
-memdiff - integer value in KB, should be nonzero if your card reports
+memdiff   integer value in KB, should be nonzero if your card reports
 	  more memory than it actually has. For instance mine is 192K less than
 	  detection says in all three BIOS selectable situations 2M, 4M, 8M.
 	  Only use if your video memory is taken from main memory hence of
@@ -56,12 +63,13 @@ memdiff - integer value in KB, should be nonzero if your card reports
 	  at the bottom this might help by not letting change to that mode
 	  anymore.
 
-nativex - the width in pixels of the flat panel.If you know it (usually 1024
+nativex   the width in pixels of the flat panel.If you know it (usually 1024
 	  800 or 1280) and it is not what the driver seems to detect use it.
 
-bpp	- bits per pixel (8,16 or 32)
-mode	- a mode name like 800x600-8@75 as described in
-	  Documentation/fb/modedb.txt
+bpp	  bits per pixel (8,16 or 32)
+mode	  a mode name like 800x600-8@75 as described in
+	  Documentation/fb/modedb.rst
+========  =====================================================================
 
 Using insane values for the above parameters will probably result in driver
 misbehaviour so take care(for instance memsize=12345678 or memdiff=23784 or
diff --git a/Documentation/fb/udlfb.txt b/Documentation/fb/udlfb.rst
similarity index 77%
rename from Documentation/fb/udlfb.txt
rename to Documentation/fb/udlfb.rst
index c985cb65dd06..732b37db3504 100644
--- a/Documentation/fb/udlfb.txt
+++ b/Documentation/fb/udlfb.rst
@@ -1,6 +1,6 @@
-
+==============
 What is udlfb?
-===============
+==============
 
 This is a driver for DisplayLink USB 2.0 era graphics chips.
 
@@ -100,6 +100,7 @@ options udlfb fb_defio=0 console=1 shadow=1
 
 Accepted boolean options:
 
+=============== ================================================================
 fb_defio	Make use of the fb_defio (CONFIG_FB_DEFERRED_IO) kernel
 		module to track changed areas of the framebuffer by page faults.
 		Standard fbdev applications that use mmap but that do not
@@ -109,7 +110,7 @@ fb_defio	Make use of the fb_defio (CONFIG_FB_DEFERRED_IO) kernel
 		more stable, and higher performance.
 		default: fb_defio=1
 
-console	Allow fbcon to attach to udlfb provided framebuffers.
+console		Allow fbcon to attach to udlfb provided framebuffers.
 		Can be disabled if fbcon and other clients
 		(e.g. X with --shared-vt) are in conflict.
 		default: console=1
@@ -119,6 +120,7 @@ shadow		Allocate a 2nd framebuffer to shadow what's currently across
 		do not transmit. Spends host memory to save USB transfers.
 		Enabled by default. Only disable on very low memory systems.
 		default: shadow=1
+=============== ================================================================
 
 Sysfs Attributes
 ================
@@ -126,34 +128,35 @@ Sysfs Attributes
 Udlfb creates several files in /sys/class/graphics/fb?
 Where ? is the sequential framebuffer id of the particular DisplayLink device
 
-edid	       		If a valid EDID blob is written to this file (typically
-			by a udev rule), then udlfb will use this EDID as a
-			backup in case reading the actual EDID of the monitor
-			attached to the DisplayLink device fails. This is
-			especially useful for fixed panels, etc. that cannot
-			communicate their capabilities via EDID. Reading
-			this file returns the current EDID of the attached
-			monitor (or last backup value written). This is
-			useful to get the EDID of the attached monitor,
-			which can be passed to utilities like parse-edid.
+======================== ========================================================
+edid			 If a valid EDID blob is written to this file (typically
+			 by a udev rule), then udlfb will use this EDID as a
+			 backup in case reading the actual EDID of the monitor
+			 attached to the DisplayLink device fails. This is
+			 especially useful for fixed panels, etc. that cannot
+			 communicate their capabilities via EDID. Reading
+			 this file returns the current EDID of the attached
+			 monitor (or last backup value written). This is
+			 useful to get the EDID of the attached monitor,
+			 which can be passed to utilities like parse-edid.
 
-metrics_bytes_rendered	32-bit count of pixel bytes rendered
+metrics_bytes_rendered	 32-bit count of pixel bytes rendered
 
-metrics_bytes_identical 32-bit count of how many of those bytes were found to be
-			unchanged, based on a shadow framebuffer check
+metrics_bytes_identical  32-bit count of how many of those bytes were found to be
+			 unchanged, based on a shadow framebuffer check
 
-metrics_bytes_sent	32-bit count of how many bytes were transferred over
-			USB to communicate the resulting changed pixels to the
-			hardware. Includes compression and protocol overhead
+metrics_bytes_sent	 32-bit count of how many bytes were transferred over
+			 USB to communicate the resulting changed pixels to the
+			 hardware. Includes compression and protocol overhead
 
 metrics_cpu_kcycles_used 32-bit count of CPU cycles used in processing the
-			above pixels (in thousands of cycles).
+			 above pixels (in thousands of cycles).
 
-metrics_reset		Write-only. Any write to this file resets all metrics
-			above to zero.  Note that the 32-bit counters above
-			roll over very quickly. To get reliable results, design
-			performance tests to start and finish in a very short
-			period of time (one minute or less is safe).
+metrics_reset		 Write-only. Any write to this file resets all metrics
+			 above to zero.  Note that the 32-bit counters above
+			 roll over very quickly. To get reliable results, design
+			 performance tests to start and finish in a very short
+			 period of time (one minute or less is safe).
+======================== ========================================================
 
---
 Bernie Thompson <bernie@plugable.com>
diff --git a/Documentation/fb/uvesafb.txt b/Documentation/fb/uvesafb.rst
similarity index 52%
rename from Documentation/fb/uvesafb.txt
rename to Documentation/fb/uvesafb.rst
index aa924196c366..d1c2523fbb33 100644
--- a/Documentation/fb/uvesafb.txt
+++ b/Documentation/fb/uvesafb.rst
@@ -1,4 +1,4 @@
-
+==========================================================
 uvesafb - A Generic Driver for VBE2+ compliant video cards
 ==========================================================
 
@@ -49,7 +49,7 @@ The most important limitations are:
 
 uvesafb can be compiled either as a module, or directly into the kernel.
 In both cases it supports the same set of configuration options, which
-are either given on the kernel command line or as module parameters, e.g.:
+are either given on the kernel command line or as module parameters, e.g.::
 
  video=uvesafb:1024x768-32,mtrr:3,ywrap (compiled into the kernel)
 
@@ -57,85 +57,90 @@ are either given on the kernel command line or as module parameters, e.g.:
 
 Accepted options:
 
+======= =========================================================
 ypan    Enable display panning using the VESA protected mode
-        interface.  The visible screen is just a window of the
-        video memory, console scrolling is done by changing the
-        start of the window.  This option is available on x86
-        only and is the default option on that architecture.
+	interface.  The visible screen is just a window of the
+	video memory, console scrolling is done by changing the
+	start of the window.  This option is available on x86
+	only and is the default option on that architecture.
 
 ywrap   Same as ypan, but assumes your gfx board can wrap-around
-        the video memory (i.e. starts reading from top if it
-        reaches the end of video memory).  Faster than ypan.
-        Available on x86 only.
+	the video memory (i.e. starts reading from top if it
+	reaches the end of video memory).  Faster than ypan.
+	Available on x86 only.
 
 redraw  Scroll by redrawing the affected part of the screen, this
-        is the default on non-x86.
+	is the default on non-x86.
+======= =========================================================
 
 (If you're using uvesafb as a module, the above three options are
- used a parameter of the scroll option, e.g. scroll=ypan.)
+used a parameter of the scroll option, e.g. scroll=ypan.)
 
-vgapal  Use the standard VGA registers for palette changes.
+=========== ====================================================================
+vgapal      Use the standard VGA registers for palette changes.
 
-pmipal  Use the protected mode interface for palette changes.
-        This is the default if the protected mode interface is
-        available.  Available on x86 only.
+pmipal      Use the protected mode interface for palette changes.
+            This is the default if the protected mode interface is
+            available.  Available on x86 only.
 
-mtrr:n  Setup memory type range registers for the framebuffer
-        where n:
-              0 - disabled (equivalent to nomtrr)
-              3 - write-combining (default)
+mtrr:n      Setup memory type range registers for the framebuffer
+            where n:
 
-	Values other than 0 and 3 will result in a warning and will be
-	treated just like 3.
+                - 0 - disabled (equivalent to nomtrr)
+                - 3 - write-combining (default)
 
-nomtrr  Do not use memory type range registers.
+            Values other than 0 and 3 will result in a warning and will be
+            treated just like 3.
+
+nomtrr      Do not use memory type range registers.
 
 vremap:n
-        Remap 'n' MiB of video RAM.  If 0 or not specified, remap memory
-        according to video mode.
+            Remap 'n' MiB of video RAM.  If 0 or not specified, remap memory
+            according to video mode.
 
-vtotal:n
-        If the video BIOS of your card incorrectly determines the total
-        amount of video RAM, use this option to override the BIOS (in MiB).
+vtotal:n    If the video BIOS of your card incorrectly determines the total
+            amount of video RAM, use this option to override the BIOS (in MiB).
 
-<mode>  The mode you want to set, in the standard modedb format.  Refer to
-        modedb.txt for a detailed description.  When uvesafb is compiled as
-        a module, the mode string should be provided as a value of the
-        'mode_option' option.
+<mode>      The mode you want to set, in the standard modedb format.  Refer to
+            modedb.txt for a detailed description.  When uvesafb is compiled as
+            a module, the mode string should be provided as a value of the
+            'mode_option' option.
 
-vbemode:x
-        Force the use of VBE mode x.  The mode will only be set if it's
-        found in the VBE-provided list of supported modes.
-        NOTE: The mode number 'x' should be specified in VESA mode number
-        notation, not the Linux kernel one (eg. 257 instead of 769).
-        HINT: If you use this option because normal <mode> parameter does
-        not work for you and you use a X server, you'll probably want to
-        set the 'nocrtc' option to ensure that the video mode is properly
-        restored after console <-> X switches.
+vbemode:x   Force the use of VBE mode x.  The mode will only be set if it's
+            found in the VBE-provided list of supported modes.
+            NOTE: The mode number 'x' should be specified in VESA mode number
+            notation, not the Linux kernel one (eg. 257 instead of 769).
+            HINT: If you use this option because normal <mode> parameter does
+            not work for you and you use a X server, you'll probably want to
+            set the 'nocrtc' option to ensure that the video mode is properly
+            restored after console <-> X switches.
 
-nocrtc  Do not use CRTC timings while setting the video mode.  This option
-        has any effect only if the Video BIOS is VBE 3.0 compliant.  Use it
-        if you have problems with modes set the standard way.  Note that
-        using this option implies that any refresh rate adjustments will
-        be ignored and the refresh rate will stay at your BIOS default (60 Hz).
+nocrtc      Do not use CRTC timings while setting the video mode.  This option
+            has any effect only if the Video BIOS is VBE 3.0 compliant.  Use it
+            if you have problems with modes set the standard way.  Note that
+            using this option implies that any refresh rate adjustments will
+            be ignored and the refresh rate will stay at your BIOS default
+            (60 Hz).
 
-noedid  Do not try to fetch and use EDID-provided modes.
+noedid      Do not try to fetch and use EDID-provided modes.
 
-noblank Disable hardware blanking.
+noblank     Disable hardware blanking.
 
-v86d:path
-        Set path to the v86d executable. This option is only available as
-        a module parameter, and not as a part of the video= string.  If you
-        need to use it and have uvesafb built into the kernel, use
-        uvesafb.v86d="path".
+v86d:path   Set path to the v86d executable. This option is only available as
+            a module parameter, and not as a part of the video= string.  If you
+            need to use it and have uvesafb built into the kernel, use
+            uvesafb.v86d="path".
+=========== ====================================================================
 
 Additionally, the following parameters may be provided.  They all override the
 EDID-provided values and BIOS defaults.  Refer to your monitor's specs to get
 the correct values for maxhf, maxvf and maxclk for your hardware.
 
+=========== ======================================
 maxhf:n     Maximum horizontal frequency (in kHz).
 maxvf:n     Maximum vertical frequency (in Hz).
 maxclk:n    Maximum pixel clock (in MHz).
+=========== ======================================
 
 4. The sysfs interface
 ----------------------
@@ -146,27 +151,26 @@ additional information.
 Driver attributes:
 
 /sys/bus/platform/drivers/uvesafb
-  - v86d (default: /sbin/v86d)
+  v86d
+    (default: /sbin/v86d)
+
     Path to the v86d executable. v86d is started by uvesafb
     if an instance of the daemon isn't already running.
 
 Device attributes:
 
 /sys/bus/platform/drivers/uvesafb/uvesafb.0
-  - nocrtc
+  nocrtc
     Use the default refresh rate (60 Hz) if set to 1.
 
-  - oem_product_name
-  - oem_product_rev
-  - oem_string
-  - oem_vendor
+  oem_product_name, oem_product_rev, oem_string, oem_vendor
     Information about the card and its maker.
 
-  - vbe_modes
+  vbe_modes
     A list of video modes supported by the Video BIOS along with their
     VBE mode numbers in hex.
 
-  - vbe_version
+  vbe_version
     A BCD value indicating the implemented VBE standard.
 
 5. Miscellaneous
@@ -176,9 +180,9 @@ Uvesafb will set a video mode with the default refresh rate and timings
 from the Video BIOS if you set pixclock to 0 in fb_var_screeninfo.
 
 
---
+
  Michal Januszewski <spock@gentoo.org>
+
  Last updated: 2017-10-10
 
  Documentation of the uvesafb options is loosely based on vesafb.txt.
-
diff --git a/Documentation/fb/vesafb.txt b/Documentation/fb/vesafb.rst
similarity index 57%
rename from Documentation/fb/vesafb.txt
rename to Documentation/fb/vesafb.rst
index 413bb73235be..2ed0dfb661cf 100644
--- a/Documentation/fb/vesafb.txt
+++ b/Documentation/fb/vesafb.rst
@@ -1,4 +1,4 @@
-
+===============
 What is vesafb?
 ===============
 
@@ -40,30 +40,35 @@ The graphic modes are NOT in the list which you get if you boot with
 vga=ask and hit return. The mode you wish to use is derived from the
 VESA mode number. Here are those VESA mode numbers:
 
-    | 640x480  800x600  1024x768 1280x1024
-----+-------------------------------------
-256 |  0x101    0x103    0x105    0x107   
-32k |  0x110    0x113    0x116    0x119   
-64k |  0x111    0x114    0x117    0x11A   
-16M |  0x112    0x115    0x118    0x11B   
+====== =======  =======  ======== =========
+colors 640x480  800x600  1024x768 1280x1024
+====== =======  =======  ======== =========
+256    0x101    0x103    0x105    0x107
+32k    0x110    0x113    0x116    0x119
+64k    0x111    0x114    0x117    0x11A
+16M    0x112    0x115    0x118    0x11B
+====== =======  =======  ======== =========
+
 
 The video mode number of the Linux kernel is the VESA mode number plus
-0x200.
- 
+0x200:
+
  Linux_kernel_mode_number = VESA_mode_number + 0x200
 
 So the table for the Kernel mode numbers are:
 
-    | 640x480  800x600  1024x768 1280x1024
-----+-------------------------------------
-256 |  0x301    0x303    0x305    0x307   
-32k |  0x310    0x313    0x316    0x319   
-64k |  0x311    0x314    0x317    0x31A   
-16M |  0x312    0x315    0x318    0x31B   
+====== =======  =======  ======== =========
+colors 640x480  800x600  1024x768 1280x1024
+====== =======  =======  ======== =========
+256    0x301    0x303    0x305    0x307
+32k    0x310    0x313    0x316    0x319
+64k    0x311    0x314    0x317    0x31A
+16M    0x312    0x315    0x318    0x31B
+====== =======  =======  ======== =========
 
 To enable one of those modes you have to specify "vga=ask" in the
 lilo.conf file and rerun LILO. Then you can type in the desired
-mode at the "vga=ask" prompt. For example if you like to use 
+mode at the "vga=ask" prompt. For example if you like to use
 1024x768x256 colors you have to say "305" at this prompt.
 
 If this does not work, this might be because your BIOS does not support
@@ -72,10 +77,10 @@ Even if your board does, it might be the BIOS which does not.  VESA BIOS
 Extensions v2.0 are required, 1.2 is NOT sufficient.  You will get a
 "bad mode number" message if something goes wrong.
 
-1. Note: LILO cannot handle hex, for booting directly with 
-         "vga=mode-number" you have to transform the numbers to decimal.
+1. Note: LILO cannot handle hex, for booting directly with
+   "vga=mode-number" you have to transform the numbers to decimal.
 2. Note: Some newer versions of LILO appear to work with those hex values,
-         if you set the 0x in front of the numbers.
+   if you set the 0x in front of the numbers.
 
 X11
 ===
@@ -120,62 +125,68 @@ Accepted options:
 
 inverse	use inverse color map
 
-ypan	enable display panning using the VESA protected mode 
-	interface.  The visible screen is just a window of the
-	video memory, console scrolling is done by changing the
-	start of the window.
-	pro:	* scrolling (fullscreen) is fast, because there is
+========= ======================================================================
+ypan	  enable display panning using the VESA protected mode
+          interface.  The visible screen is just a window of the
+          video memory, console scrolling is done by changing the
+          start of the window.
+
+          pro:
+
+                * scrolling (fullscreen) is fast, because there is
 		  no need to copy around data.
 		* You'll get scrollback (the Shift-PgUp thing),
 		  the video memory can be used as scrollback buffer
-	kontra: * scrolling only parts of the screen causes some
+
+          kontra:
+
+		* scrolling only parts of the screen causes some
 		  ugly flicker effects (boot logo flickers for
 		  example).
 
-ywrap	Same as ypan, but assumes your gfx board can wrap-around 
-	the video memory (i.e. starts reading from top if it
-	reaches the end of video memory).  Faster than ypan.
+ywrap	  Same as ypan, but assumes your gfx board can wrap-around
+          the video memory (i.e. starts reading from top if it
+          reaches the end of video memory).  Faster than ypan.
 
-redraw	scroll by redrawing the affected part of the screen, this
-	is the safe (and slow) default.
+redraw	  Scroll by redrawing the affected part of the screen, this
+          is the safe (and slow) default.
 
 
-vgapal	Use the standard vga registers for palette changes.
-	This is the default.
-pmipal	Use the protected mode interface for palette changes.
+vgapal	  Use the standard vga registers for palette changes.
+          This is the default.
+pmipal    Use the protected mode interface for palette changes.
 
-mtrr:n	setup memory type range registers for the vesafb framebuffer
-	where n:
-	      0 - disabled (equivalent to nomtrr) (default)
-	      1 - uncachable
-	      2 - write-back
-	      3 - write-combining
-	      4 - write-through
+mtrr:n	  Setup memory type range registers for the vesafb framebuffer
+          where n:
 
-	If you see the following in dmesg, choose the type that matches the
-	old one. In this example, use "mtrr:2".
+              - 0 - disabled (equivalent to nomtrr) (default)
+              - 1 - uncachable
+              - 2 - write-back
+              - 3 - write-combining
+              - 4 - write-through
+
+          If you see the following in dmesg, choose the type that matches the
+          old one. In this example, use "mtrr:2".
 ...
-mtrr: type mismatch for e0000000,8000000 old: write-back new: write-combining
+mtrr:     type mismatch for e0000000,8000000 old: write-back new:
+	  write-combining
 ...
 
-nomtrr  disable mtrr
+nomtrr    disable mtrr
 
 vremap:n
-        remap 'n' MiB of video RAM. If 0 or not specified, remap memory
-	according to video mode. (2.5.66 patch/idea by Antonino Daplas
-	reversed to give override possibility (allocate more fb memory
-	than the kernel would) to 2.4 by tmb@iki.fi)
+          Remap 'n' MiB of video RAM. If 0 or not specified, remap memory
+          according to video mode. (2.5.66 patch/idea by Antonino Daplas
+          reversed to give override possibility (allocate more fb memory
+          than the kernel would) to 2.4 by tmb@iki.fi)
 
-vtotal:n
-        if the video BIOS of your card incorrectly determines the total
-        amount of video RAM, use this option to override the BIOS (in MiB).
+vtotal:n  If the video BIOS of your card incorrectly determines the total
+          amount of video RAM, use this option to override the BIOS (in MiB).
+========= ======================================================================
 
 Have fun!
 
-  Gerd
-
---
 Gerd Knorr <kraxel@goldbach.in-berlin.de>
 
-Minor (mostly typo) changes 
+Minor (mostly typo) changes
 by Nico Schmoigl <schmoigl@rumms.uni-mannheim.de>
diff --git a/Documentation/fb/viafb.rst b/Documentation/fb/viafb.rst
new file mode 100644
index 000000000000..8eb7a3bb068c
--- /dev/null
+++ b/Documentation/fb/viafb.rst
@@ -0,0 +1,297 @@
+=======================================================
+VIA Integration Graphic Chip Console Framebuffer Driver
+=======================================================
+
+Platform
+--------
+    The console framebuffer driver is for graphics chips of
+    VIA UniChrome Family
+    (CLE266, PM800 / CN400 / CN300,
+    P4M800CE / P4M800Pro / CN700 / VN800,
+    CX700 / VX700, K8M890, P4M890,
+    CN896 / P4M900, VX800, VX855)
+
+Driver features
+---------------
+    Device: CRT, LCD, DVI
+
+    Support viafb_mode::
+
+	CRT:
+	    640x480(60, 75, 85, 100, 120 Hz), 720x480(60 Hz),
+	    720x576(60 Hz), 800x600(60, 75, 85, 100, 120 Hz),
+	    848x480(60 Hz), 856x480(60 Hz), 1024x512(60 Hz),
+	    1024x768(60, 75, 85, 100 Hz), 1152x864(75 Hz),
+	    1280x768(60 Hz), 1280x960(60 Hz), 1280x1024(60, 75, 85 Hz),
+	    1440x1050(60 Hz), 1600x1200(60, 75 Hz), 1280x720(60 Hz),
+	    1920x1080(60 Hz), 1400x1050(60 Hz), 800x480(60 Hz)
+
+    color depth: 8 bpp, 16 bpp, 32 bpp supports.
+
+    Support 2D hardware accelerator.
+
+Using the viafb module
+----------------------
+    Start viafb with default settings::
+
+	#modprobe viafb
+
+    Start viafb with user options::
+
+	#modprobe viafb viafb_mode=800x600 viafb_bpp=16 viafb_refresh=60
+		  viafb_active_dev=CRT+DVI viafb_dvi_port=DVP1
+		  viafb_mode1=1024x768 viafb_bpp=16 viafb_refresh1=60
+		  viafb_SAMM_ON=1
+
+    viafb_mode:
+	- 640x480 (default)
+	- 720x480
+	- 800x600
+	- 1024x768
+
+    viafb_bpp:
+	- 8, 16, 32 (default:32)
+
+    viafb_refresh:
+	- 60, 75, 85, 100, 120 (default:60)
+
+    viafb_lcd_dsp_method:
+	- 0 : expansion (default)
+	- 1 : centering
+
+    viafb_lcd_mode:
+	0 : LCD panel with LSB data format input (default)
+	1 : LCD panel with MSB data format input
+
+    viafb_lcd_panel_id:
+	- 0 : Resolution: 640x480, Channel: single, Dithering: Enable
+	- 1 : Resolution: 800x600, Channel: single, Dithering: Enable
+	- 2 : Resolution: 1024x768, Channel: single, Dithering: Enable (default)
+	- 3 : Resolution: 1280x768, Channel: single, Dithering: Enable
+	- 4 : Resolution: 1280x1024, Channel: dual, Dithering: Enable
+	- 5 : Resolution: 1400x1050, Channel: dual, Dithering: Enable
+	- 6 : Resolution: 1600x1200, Channel: dual, Dithering: Enable
+
+	- 8 : Resolution: 800x480, Channel: single, Dithering: Enable
+	- 9 : Resolution: 1024x768, Channel: dual, Dithering: Enable
+	- 10: Resolution: 1024x768, Channel: single, Dithering: Disable
+	- 11: Resolution: 1024x768, Channel: dual, Dithering: Disable
+	- 12: Resolution: 1280x768, Channel: single, Dithering: Disable
+	- 13: Resolution: 1280x1024, Channel: dual, Dithering: Disable
+	- 14: Resolution: 1400x1050, Channel: dual, Dithering: Disable
+	- 15: Resolution: 1600x1200, Channel: dual, Dithering: Disable
+	- 16: Resolution: 1366x768, Channel: single, Dithering: Disable
+	- 17: Resolution: 1024x600, Channel: single, Dithering: Enable
+	- 18: Resolution: 1280x768, Channel: dual, Dithering: Enable
+	- 19: Resolution: 1280x800, Channel: single, Dithering: Enable
+
+    viafb_accel:
+	- 0 : No 2D Hardware Acceleration
+	- 1 : 2D Hardware Acceleration (default)
+
+    viafb_SAMM_ON:
+	- 0 : viafb_SAMM_ON disable (default)
+	- 1 : viafb_SAMM_ON enable
+
+    viafb_mode1: (secondary display device)
+	- 640x480 (default)
+	- 720x480
+	- 800x600
+	- 1024x768
+
+    viafb_bpp1: (secondary display device)
+	- 8, 16, 32 (default:32)
+
+    viafb_refresh1: (secondary display device)
+	- 60, 75, 85, 100, 120 (default:60)
+
+    viafb_active_dev:
+	This option is used to specify active devices.(CRT, DVI, CRT+LCD...)
+	DVI stands for DVI or HDMI, E.g., If you want to enable HDMI,
+	set viafb_active_dev=DVI. In SAMM case, the previous of
+	viafb_active_dev is primary device, and the following is
+	secondary device.
+
+	For example:
+
+	To enable one device, such as DVI only, we can use::
+
+	    modprobe viafb viafb_active_dev=DVI
+
+	To enable two devices, such as CRT+DVI::
+
+	    modprobe viafb viafb_active_dev=CRT+DVI;
+
+	For DuoView case, we can use::
+
+	    modprobe viafb viafb_active_dev=CRT+DVI
+
+	OR::
+
+	    modprobe viafb viafb_active_dev=DVI+CRT...
+
+	For SAMM case:
+
+	If CRT is primary and DVI is secondary, we should use::
+
+	    modprobe viafb viafb_active_dev=CRT+DVI viafb_SAMM_ON=1...
+
+	If DVI is primary and CRT is secondary, we should use::
+
+	    modprobe viafb viafb_active_dev=DVI+CRT viafb_SAMM_ON=1...
+
+    viafb_display_hardware_layout:
+	This option is used to specify display hardware layout for CX700 chip.
+
+	- 1 : LCD only
+	- 2 : DVI only
+	- 3 : LCD+DVI (default)
+	- 4 : LCD1+LCD2 (internal + internal)
+	- 16: LCD1+ExternalLCD2 (internal + external)
+
+    viafb_second_size:
+	This option is used to set second device memory size(MB) in SAMM case.
+	The minimal size is 16.
+
+    viafb_platform_epia_dvi:
+	This option is used to enable DVI on EPIA - M
+
+	- 0 : No DVI on EPIA - M (default)
+	- 1 : DVI on EPIA - M
+
+    viafb_bus_width:
+	When using 24 - Bit Bus Width Digital Interface,
+	this option should be set.
+
+	- 12: 12-Bit LVDS or 12-Bit TMDS (default)
+	- 24: 24-Bit LVDS or 24-Bit TMDS
+
+    viafb_device_lcd_dualedge:
+	When using Dual Edge Panel, this option should be set.
+
+	- 0 : No Dual Edge Panel (default)
+	- 1 : Dual Edge Panel
+
+    viafb_lcd_port:
+	This option is used to specify LCD output port,
+	available values are "DVP0" "DVP1" "DFP_HIGHLOW" "DFP_HIGH" "DFP_LOW".
+
+	for external LCD + external DVI on CX700(External LCD is on DVP0),
+	we should use::
+
+	    modprobe viafb viafb_lcd_port=DVP0...
+
+Notes:
+    1. CRT may not display properly for DuoView CRT & DVI display at
+       the "640x480" PAL mode with DVI overscan enabled.
+    2. SAMM stands for single adapter multi monitors. It is different from
+       multi-head since SAMM support multi monitor at driver layers, thus fbcon
+       layer doesn't even know about it; SAMM's second screen doesn't have a
+       device node file, thus a user mode application can't access it directly.
+       When SAMM is enabled, viafb_mode and viafb_mode1, viafb_bpp and
+       viafb_bpp1, viafb_refresh and viafb_refresh1 can be different.
+    3. When console is depending on viafbinfo1, dynamically change resolution
+       and bpp, need to call VIAFB specified ioctl interface VIAFB_SET_DEVICE
+       instead of calling common ioctl function FBIOPUT_VSCREENINFO since
+       viafb doesn't support multi-head well, or it will cause screen crush.
+
+
+Configure viafb with "fbset" tool
+---------------------------------
+
+    "fbset" is an inbox utility of Linux.
+
+    1. Inquire current viafb information, type::
+
+	   # fbset -i
+
+    2. Set various resolutions and viafb_refresh rates::
+
+	   # fbset <resolution-vertical_sync>
+
+       example::
+
+	   # fbset "1024x768-75"
+
+       or::
+
+	   # fbset -g 1024 768 1024 768 32
+
+       Check the file "/etc/fb.modes" to find display modes available.
+
+    3. Set the color depth::
+
+	   # fbset -depth <value>
+
+       example::
+
+	   # fbset -depth 16
+
+
+Configure viafb via /proc
+-------------------------
+    The following files exist in /proc/viafb
+
+    supported_output_devices
+	This read-only file contains a full ',' separated list containing all
+	output devices that could be available on your platform. It is likely
+	that not all of those have a connector on your hardware but it should
+	provide a good starting point to figure out which of those names match
+	a real connector.
+
+	Example::
+
+		# cat /proc/viafb/supported_output_devices
+
+    iga1/output_devices, iga2/output_devices
+	These two files are readable and writable. iga1 and iga2 are the two
+	independent units that produce the screen image. Those images can be
+	forwarded to one or more output devices. Reading those files is a way
+	to query which output devices are currently used by an iga.
+
+	Example::
+
+		# cat /proc/viafb/iga1/output_devices
+
+	If there are no output devices printed the output of this iga is lost.
+	This can happen for example if only one (the other) iga is used.
+	Writing to these files allows adjusting the output devices during
+	runtime. One can add new devices, remove existing ones or switch
+	between igas. Essentially you can write a ',' separated list of device
+	names (or a single one) in the same format as the output to those
+	files. You can add a '+' or '-' as a prefix allowing simple addition
+	and removal of devices. So a prefix '+' adds the devices from your list
+	to the already existing ones, '-' removes the listed devices from the
+	existing ones and if no prefix is given it replaces all existing ones
+	with the listed ones. If you remove devices they are expected to turn
+	off. If you add devices that are already part of the other iga they are
+	removed there and added to the new one.
+
+	Examples:
+
+	Add CRT as output device to iga1::
+
+		# echo +CRT > /proc/viafb/iga1/output_devices
+
+	Remove (turn off) DVP1 and LVDS1 as output devices of iga2::
+
+		# echo -DVP1,LVDS1 > /proc/viafb/iga2/output_devices
+
+	Replace all iga1 output devices by CRT::
+
+		# echo CRT > /proc/viafb/iga1/output_devices
+
+
+Bootup with viafb
+-----------------
+
+Add the following line to your grub.conf::
+
+    append = "video=viafb:viafb_mode=1024x768,viafb_bpp=32,viafb_refresh=85"
+
+
+VIA Framebuffer modes
+=====================
+
+.. include:: viafb.modes
+   :literal:
diff --git a/Documentation/fb/viafb.txt b/Documentation/fb/viafb.txt
deleted file mode 100644
index 1cb2462a71ce..000000000000
--- a/Documentation/fb/viafb.txt
+++ /dev/null
@@ -1,252 +0,0 @@
-
-        VIA Integration Graphic Chip Console Framebuffer Driver
-
-[Platform]
------------------------
-    The console framebuffer driver is for graphics chips of
-    VIA UniChrome Family(CLE266, PM800 / CN400 / CN300,
-                        P4M800CE / P4M800Pro / CN700 / VN800,
-                        CX700 / VX700, K8M890, P4M890,
-                        CN896 / P4M900, VX800, VX855)
-
-[Driver features]
-------------------------
-    Device: CRT, LCD, DVI
-
-    Support viafb_mode:
-        CRT:
-            640x480(60, 75, 85, 100, 120 Hz), 720x480(60 Hz),
-            720x576(60 Hz), 800x600(60, 75, 85, 100, 120 Hz),
-            848x480(60 Hz), 856x480(60 Hz), 1024x512(60 Hz),
-            1024x768(60, 75, 85, 100 Hz), 1152x864(75 Hz),
-            1280x768(60 Hz), 1280x960(60 Hz), 1280x1024(60, 75, 85 Hz),
-            1440x1050(60 Hz), 1600x1200(60, 75 Hz), 1280x720(60 Hz),
-            1920x1080(60 Hz), 1400x1050(60 Hz), 800x480(60 Hz)
-
-    color depth: 8 bpp, 16 bpp, 32 bpp supports.
-
-    Support 2D hardware accelerator.
-
-[Using the viafb module]
--- -- --------------------
-    Start viafb with default settings:
-        #modprobe viafb
-
-    Start viafb with user options:
-        #modprobe viafb viafb_mode=800x600 viafb_bpp=16 viafb_refresh=60
-                  viafb_active_dev=CRT+DVI viafb_dvi_port=DVP1
-                  viafb_mode1=1024x768 viafb_bpp=16 viafb_refresh1=60
-                  viafb_SAMM_ON=1
-
-    viafb_mode:
-        640x480 (default)
-        720x480
-        800x600
-        1024x768
-        ......
-
-    viafb_bpp:
-        8, 16, 32 (default:32)
-
-    viafb_refresh:
-        60, 75, 85, 100, 120 (default:60)
-
-    viafb_lcd_dsp_method:
-        0 : expansion (default)
-        1 : centering
-
-    viafb_lcd_mode:
-        0 : LCD panel with LSB data format input (default)
-        1 : LCD panel with MSB data format input
-
-    viafb_lcd_panel_id:
-        0 : Resolution: 640x480, Channel: single, Dithering: Enable
-        1 : Resolution: 800x600, Channel: single, Dithering: Enable
-        2 : Resolution: 1024x768, Channel: single, Dithering: Enable (default)
-        3 : Resolution: 1280x768, Channel: single, Dithering: Enable
-        4 : Resolution: 1280x1024, Channel: dual, Dithering: Enable
-        5 : Resolution: 1400x1050, Channel: dual, Dithering: Enable
-        6 : Resolution: 1600x1200, Channel: dual, Dithering: Enable
-
-        8 : Resolution: 800x480, Channel: single, Dithering: Enable
-        9 : Resolution: 1024x768, Channel: dual, Dithering: Enable
-        10: Resolution: 1024x768, Channel: single, Dithering: Disable
-        11: Resolution: 1024x768, Channel: dual, Dithering: Disable
-        12: Resolution: 1280x768, Channel: single, Dithering: Disable
-        13: Resolution: 1280x1024, Channel: dual, Dithering: Disable
-        14: Resolution: 1400x1050, Channel: dual, Dithering: Disable
-        15: Resolution: 1600x1200, Channel: dual, Dithering: Disable
-        16: Resolution: 1366x768, Channel: single, Dithering: Disable
-        17: Resolution: 1024x600, Channel: single, Dithering: Enable
-        18: Resolution: 1280x768, Channel: dual, Dithering: Enable
-        19: Resolution: 1280x800, Channel: single, Dithering: Enable
-
-    viafb_accel:
-        0 : No 2D Hardware Acceleration
-        1 : 2D Hardware Acceleration (default)
-
-    viafb_SAMM_ON:
-        0 : viafb_SAMM_ON disable (default)
-        1 : viafb_SAMM_ON enable
-
-    viafb_mode1: (secondary display device)
-        640x480 (default)
-        720x480
-        800x600
-        1024x768
-        ... ...
-
-    viafb_bpp1: (secondary display device)
-        8, 16, 32 (default:32)
-
-    viafb_refresh1: (secondary display device)
-        60, 75, 85, 100, 120 (default:60)
-
-    viafb_active_dev:
-        This option is used to specify active devices.(CRT, DVI, CRT+LCD...)
-        DVI stands for DVI or HDMI, E.g., If you want to enable HDMI,
-        set viafb_active_dev=DVI. In SAMM case, the previous of
-        viafb_active_dev is primary device, and the following is
-        secondary device.
-
-        For example:
-        To enable one device, such as DVI only, we can use:
-            modprobe viafb viafb_active_dev=DVI
-        To enable two devices, such as CRT+DVI:
-            modprobe viafb viafb_active_dev=CRT+DVI;
-
-        For DuoView case, we can use:
-            modprobe viafb viafb_active_dev=CRT+DVI
-            OR
-            modprobe viafb viafb_active_dev=DVI+CRT...
-
-        For SAMM case:
-        If CRT is primary and DVI is secondary, we should use:
-            modprobe viafb viafb_active_dev=CRT+DVI viafb_SAMM_ON=1...
-        If DVI is primary and CRT is secondary, we should use:
-            modprobe viafb viafb_active_dev=DVI+CRT viafb_SAMM_ON=1...
-
-    viafb_display_hardware_layout:
-        This option is used to specify display hardware layout for CX700 chip.
-        1 : LCD only
-        2 : DVI only
-        3 : LCD+DVI (default)
-        4 : LCD1+LCD2 (internal + internal)
-        16: LCD1+ExternalLCD2 (internal + external)
-
-    viafb_second_size:
-        This option is used to set second device memory size(MB) in SAMM case.
-        The minimal size is 16.
-
-    viafb_platform_epia_dvi:
-        This option is used to enable DVI on EPIA - M
-        0 : No DVI on EPIA - M (default)
-        1 : DVI on EPIA - M
-
-    viafb_bus_width:
-        When using 24 - Bit Bus Width Digital Interface,
-        this option should be set.
-        12: 12-Bit LVDS or 12-Bit TMDS (default)
-        24: 24-Bit LVDS or 24-Bit TMDS
-
-    viafb_device_lcd_dualedge:
-        When using Dual Edge Panel, this option should be set.
-        0 : No Dual Edge Panel (default)
-        1 : Dual Edge Panel
-
-    viafb_lcd_port:
-        This option is used to specify LCD output port,
-        available values are "DVP0" "DVP1" "DFP_HIGHLOW" "DFP_HIGH" "DFP_LOW".
-        for external LCD + external DVI on CX700(External LCD is on DVP0),
-        we should use:
-            modprobe viafb viafb_lcd_port=DVP0...
-
-Notes:
-    1. CRT may not display properly for DuoView CRT & DVI display at
-       the "640x480" PAL mode with DVI overscan enabled.
-    2. SAMM stands for single adapter multi monitors. It is different from
-       multi-head since SAMM support multi monitor at driver layers, thus fbcon
-       layer doesn't even know about it; SAMM's second screen doesn't have a
-       device node file, thus a user mode application can't access it directly.
-       When SAMM is enabled, viafb_mode and viafb_mode1, viafb_bpp and
-       viafb_bpp1, viafb_refresh and viafb_refresh1 can be different.
-    3. When console is depending on viafbinfo1, dynamically change resolution
-       and bpp, need to call VIAFB specified ioctl interface VIAFB_SET_DEVICE
-       instead of calling common ioctl function FBIOPUT_VSCREENINFO since
-       viafb doesn't support multi-head well, or it will cause screen crush.
-
-
-[Configure viafb with "fbset" tool]
------------------------------------
-    "fbset" is an inbox utility of Linux.
-    1. Inquire current viafb information, type,
-           # fbset -i
-
-    2. Set various resolutions and viafb_refresh rates,
-           # fbset <resolution-vertical_sync>
-
-       example,
-           # fbset "1024x768-75"
-       or
-           # fbset -g 1024 768 1024 768 32
-       Check the file "/etc/fb.modes" to find display modes available.
-
-    3. Set the color depth,
-           # fbset -depth <value>
-
-       example,
-           # fbset -depth 16
-
-
-[Configure viafb via /proc]
----------------------------
-    The following files exist in /proc/viafb
-
-    supported_output_devices
-
-        This read-only file contains a full ',' separated list containing all
-        output devices that could be available on your platform. It is likely
-        that not all of those have a connector on your hardware but it should
-        provide a good starting point to figure out which of those names match
-        a real connector.
-        Example:
-        # cat /proc/viafb/supported_output_devices
-
-    iga1/output_devices
-    iga2/output_devices
-
-        These two files are readable and writable. iga1 and iga2 are the two
-        independent units that produce the screen image. Those images can be
-        forwarded to one or more output devices. Reading those files is a way
-        to query which output devices are currently used by an iga.
-        Example:
-        # cat /proc/viafb/iga1/output_devices
-        If there are no output devices printed the output of this iga is lost.
-        This can happen for example if only one (the other) iga is used.
-        Writing to these files allows adjusting the output devices during
-        runtime. One can add new devices, remove existing ones or switch
-        between igas. Essentially you can write a ',' separated list of device
-        names (or a single one) in the same format as the output to those
-        files. You can add a '+' or '-' as a prefix allowing simple addition
-        and removal of devices. So a prefix '+' adds the devices from your list
-        to the already existing ones, '-' removes the listed devices from the
-        existing ones and if no prefix is given it replaces all existing ones
-        with the listed ones. If you remove devices they are expected to turn
-        off. If you add devices that are already part of the other iga they are
-        removed there and added to the new one.
-        Examples:
-        Add CRT as output device to iga1
-        # echo +CRT > /proc/viafb/iga1/output_devices
-
-        Remove (turn off) DVP1 and LVDS1 as output devices of iga2
-        # echo -DVP1,LVDS1 > /proc/viafb/iga2/output_devices
-
-        Replace all iga1 output devices by CRT
-        # echo CRT > /proc/viafb/iga1/output_devices
-
-
-[Bootup with viafb]:
---------------------
-    Add the following line to your grub.conf:
-    append = "video=viafb:viafb_mode=1024x768,viafb_bpp=32,viafb_refresh=85"
-
diff --git a/Documentation/fb/vt8623fb.txt b/Documentation/fb/vt8623fb.rst
similarity index 85%
rename from Documentation/fb/vt8623fb.txt
rename to Documentation/fb/vt8623fb.rst
index f654576c56b7..ba1730937dd8 100644
--- a/Documentation/fb/vt8623fb.txt
+++ b/Documentation/fb/vt8623fb.rst
@@ -1,13 +1,13 @@
-
-	vt8623fb - fbdev driver for graphics core in VIA VT8623 chipset
-	===============================================================
+===============================================================
+vt8623fb - fbdev driver for graphics core in VIA VT8623 chipset
+===============================================================
 
 
 Supported Hardware
 ==================
 
-	VIA VT8623 [CLE266] chipset and	its graphics core
-		(known as CastleRock or Unichrome)
+VIA VT8623 [CLE266] chipset and	its graphics core
+(known as CastleRock or Unichrome)
 
 I tested vt8623fb on VIA EPIA ML-6000
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 1595b65e5249..fac4490d2a00 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4724,7 +4724,7 @@ S:	Maintained
 W:	http://plugable.com/category/projects/udlfb/
 F:	drivers/video/fbdev/udlfb.c
 F:	include/video/udlfb.h
-F:	Documentation/fb/udlfb.txt
+F:	Documentation/fb/udlfb.rst
 
 DISTRIBUTED LOCK MANAGER (DLM)
 M:	Christine Caulfield <ccaulfie@redhat.com>
@@ -7858,7 +7858,7 @@ INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
 M:	Maik Broemme <mbroemme@libmpq.org>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
-F:	Documentation/fb/intelfb.txt
+F:	Documentation/fb/intelfb.rst
 F:	drivers/video/fbdev/intelfb/
 
 INTEL GPIO DRIVERS
@@ -14225,7 +14225,7 @@ M:	Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/fbdev/sm712*
-F:	Documentation/fb/sm712fb.txt
+F:	Documentation/fb/sm712fb.rst
 
 SIMPLE FIRMWARE INTERFACE (SFI)
 M:	Len Brown <lenb@kernel.org>
@@ -14295,7 +14295,7 @@ SIS FRAMEBUFFER DRIVER
 M:	Thomas Winischhofer <thomas@winischhofer.net>
 W:	http://www.winischhofer.net/linuxsisvga.shtml
 S:	Maintained
-F:	Documentation/fb/sisfb.txt
+F:	Documentation/fb/sisfb.rst
 F:	drivers/video/fbdev/sis/
 F:	include/video/sisfb.h
 
@@ -16464,7 +16464,7 @@ M:	Michal Januszewski <spock@gentoo.org>
 L:	linux-fbdev@vger.kernel.org
 W:	https://github.com/mjanusz/v86d
 S:	Maintained
-F:	Documentation/fb/uvesafb.txt
+F:	Documentation/fb/uvesafb.rst
 F:	drivers/video/fbdev/uvesafb.*
 
 VF610 NAND DRIVER
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index 8034473c54ca..9acf8ccdabf6 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -96,7 +96,7 @@ config VT_HW_CONSOLE_BINDING
 
 	 See <file:Documentation/console/console.txt> for more
 	 information. For framebuffer console users, please refer to
-	 <file:Documentation/fb/fbcon.txt>.
+	 <file:Documentation/fb/fbcon.rst>.
 
 config UNIX98_PTYS
 	bool "Unix98 PTY support" if EXPERT
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 47ecf9ad4d51..9fdae1d10cbc 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -30,7 +30,7 @@ menuconfig FB
 	  in the /dev directory, i.e. /dev/fb*.
 
 	  You need an utility program called fbset to make full use of frame
-	  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
+	  buffer devices. Please read <file:Documentation/fb/framebuffer.rst>
 	  and the Framebuffer-HOWTO at
 	  <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
 	  information.
@@ -241,7 +241,7 @@ config FB_CIRRUS
 	  If you have a PCI-based system, this enables support for these
 	  chips: GD-543x, GD-544x, GD-5480.
 
-	  Please read the file <file:Documentation/fb/cirrusfb.txt>.
+	  Please read the file <file:Documentation/fb/cirrusfb.rst>.
 
 	  Say N unless you have such a graphics board or plan to get one
 	  before you next recompile the kernel.
@@ -617,7 +617,7 @@ config FB_UVESA
 
 	  This driver generally provides more features than vesafb but
 	  requires a userspace helper application called 'v86d'. See
-	  <file:Documentation/fb/uvesafb.txt> for more information.
+	  <file:Documentation/fb/uvesafb.rst> for more information.
 
 	  If unsure, say N.
 
@@ -632,7 +632,7 @@ config FB_VESA
 	  This is the frame buffer device driver for generic VESA 2.0
 	  compliant graphic cards. The older VESA 1.2 cards are not supported.
 	  You will get a boot time penguin logo at no additional cost. Please
-	  read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
+	  read <file:Documentation/fb/vesafb.rst>. If unsure, say Y.
 
 config FB_EFI
 	bool "EFI-based Framebuffer Support"
@@ -828,7 +828,7 @@ config FB_PVR2
 	  module load time.  The parameters look like "video=pvr2:XXX", where
 	  the meaning of XXX can be found at the end of the main source file
 	  (<file:drivers/video/pvr2fb.c>). Please see the file
-	  <file:Documentation/fb/pvr2fb.txt>.
+	  <file:Documentation/fb/pvr2fb.rst>.
 
 config FB_OPENCORES
 	tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
@@ -990,7 +990,7 @@ config FB_I810
 	  module will be called i810fb.
 
 	  For more information, please read
-	  <file:Documentation/fb/intel810.txt>
+	  <file:Documentation/fb/intel810.rst>
 
 config FB_I810_GTF
 	bool "use VESA Generalized Timing Formula"
@@ -1060,7 +1060,7 @@ config FB_INTEL
 	  To compile this driver as a module, choose M here: the
 	  module will be called intelfb.
 
-	  For more information, please read <file:Documentation/fb/intelfb.txt>
+	  For more information, please read <file:Documentation/fb/intelfb.rst>
 
 config FB_INTEL_DEBUG
 	bool "Intel driver Debug Messages"
@@ -1097,7 +1097,7 @@ config FB_MATROX
 
 	  You can pass several parameters to the driver at boot time or at
 	  module load time. The parameters look like "video=matroxfb:XXX", and
-	  are described in <file:Documentation/fb/matroxfb.txt>.
+	  are described in <file:Documentation/fb/matroxfb.rst>.
 
 config FB_MATROX_MILLENIUM
 	bool "Millennium I/II support"
@@ -1248,7 +1248,7 @@ config FB_ATY128
 	help
 	  This driver supports graphics boards with the ATI Rage128 chips.
 	  Say Y if you have such a graphics board and read
-	  <file:Documentation/fb/aty128fb.txt>.
+	  <file:Documentation/fb/aty128fb.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called aty128fb.
@@ -1510,7 +1510,7 @@ config FB_VOODOO1
 
 	  WARNING: Do not use any application that uses the 3D engine
 	  (namely glide) while using this driver.
-	  Please read the <file:Documentation/fb/sstfb.txt> for supported
+	  Please read the <file:Documentation/fb/sstfb.rst> for supported
 	  options and other important info  support.
 
 config FB_VT8623
@@ -1542,7 +1542,7 @@ config FB_TRIDENT
 	  There are also integrated versions of these chips called CyberXXXX,
 	  CyberImage or CyberBlade. These chips are mostly found in laptops
 	  but also on some motherboards including early VIA EPIA motherboards.
-	  For more information, read <file:Documentation/fb/tridentfb.txt>
+	  For more information, read <file:Documentation/fb/tridentfb.rst>
 
 	  Say Y if you have such a graphics board.
 
@@ -1781,7 +1781,7 @@ config FB_PXA_PARAMETERS
 	  single model of flatpanel then you can safely leave this
 	  option disabled.
 
-	  <file:Documentation/fb/pxafb.txt> describes the available parameters.
+	  <file:Documentation/fb/pxafb.rst> describes the available parameters.
 
 config PXA3XX_GCU
 	tristate "PXA3xx 2D graphics accelerator driver"
diff --git a/drivers/video/fbdev/matrox/matroxfb_base.c b/drivers/video/fbdev/matrox/matroxfb_base.c
index d11b5e6210ed..60e0d2941c53 100644
--- a/drivers/video/fbdev/matrox/matroxfb_base.c
+++ b/drivers/video/fbdev/matrox/matroxfb_base.c
@@ -2501,7 +2501,7 @@ MODULE_PARM_DESC(nobios, "Disables ROM BIOS (0 or 1=disabled) (default=do not ch
 module_param(noinit, int, 0);
 MODULE_PARM_DESC(noinit, "Disables W/SG/SD-RAM and bus interface initialization (0 or 1=do not initialize) (default=0)");
 module_param(memtype, int, 0);
-MODULE_PARM_DESC(memtype, "Memory type for G200/G400 (see Documentation/fb/matroxfb.txt for explanation) (default=3 for G200, 0 for G400)");
+MODULE_PARM_DESC(memtype, "Memory type for G200/G400 (see Documentation/fb/matroxfb.rst for explanation) (default=3 for G200, 0 for G400)");
 module_param(mtrr, int, 0);
 MODULE_PARM_DESC(mtrr, "This speeds up video memory accesses (0=disabled or 1) (default=1)");
 module_param(sgram, int, 0);
diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c
index d59c8a59f582..4282cb117b92 100644
--- a/drivers/video/fbdev/pxafb.c
+++ b/drivers/video/fbdev/pxafb.c
@@ -2068,7 +2068,7 @@ static int __init pxafb_setup_options(void)
 #define pxafb_setup_options()		(0)
 
 module_param_string(options, g_options, sizeof(g_options), 0);
-MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
+MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.rst)");
 #endif
 
 #else
diff --git a/drivers/video/fbdev/sh7760fb.c b/drivers/video/fbdev/sh7760fb.c
index 405715b60ec7..ab8fe838c776 100644
--- a/drivers/video/fbdev/sh7760fb.c
+++ b/drivers/video/fbdev/sh7760fb.c
@@ -6,7 +6,7 @@
  *             Manuel Lauss <mano@roarinelk.homelinux.net>
  * (c) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
  *
- * PLEASE HAVE A LOOK AT Documentation/fb/sh7760fb.txt!
+ * PLEASE HAVE A LOOK AT Documentation/fb/sh7760fb.rst!
  *
  * Thanks to Siegfried Schaefer <s.schaefer at schaefer-edv.de>
  *     for his original source and testing!
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 14/79] docs: fpga: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (12 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 13/79] docs: fb: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 15/79] docs: gpio: " Mauro Carvalho Chehab
                     ` (63 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Wu Hao, Alan Tull, Moritz Fischer, linux-fpga

The dfl.txt file is almost there. It needs just a few
adjustments to be properly parsed.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/fpga/{dfl.txt => dfl.rst} | 58 ++++++++++++++-----------
 Documentation/fpga/index.rst            | 17 ++++++++
 MAINTAINERS                             |  2 +-
 3 files changed, 50 insertions(+), 27 deletions(-)
 rename Documentation/fpga/{dfl.txt => dfl.rst} (89%)
 create mode 100644 Documentation/fpga/index.rst

diff --git a/Documentation/fpga/dfl.txt b/Documentation/fpga/dfl.rst
similarity index 89%
rename from Documentation/fpga/dfl.txt
rename to Documentation/fpga/dfl.rst
index 6df4621c3f2a..2f125abd777f 100644
--- a/Documentation/fpga/dfl.txt
+++ b/Documentation/fpga/dfl.rst
@@ -1,9 +1,12 @@
-===============================================================================
-              FPGA Device Feature List (DFL) Framework Overview
--------------------------------------------------------------------------------
-                Enno Luebbers <enno.luebbers@intel.com>
-                Xiao Guangrong <guangrong.xiao@linux.intel.com>
-                Wu Hao <hao.wu@intel.com>
+=================================================
+FPGA Device Feature List (DFL) Framework Overview
+=================================================
+
+Authors:
+
+- Enno Luebbers <enno.luebbers@intel.com>
+- Xiao Guangrong <guangrong.xiao@linux.intel.com>
+- Wu Hao <hao.wu@intel.com>
 
 The Device Feature List (DFL) FPGA framework (and drivers according to this
 this framework) hides the very details of low layer hardwares and provides
@@ -19,7 +22,7 @@ Device Feature List (DFL) defines a linked list of feature headers within the
 device MMIO space to provide an extensible way of adding features. Software can
 walk through these predefined data structures to enumerate FPGA features:
 FPGA Interface Unit (FIU), Accelerated Function Unit (AFU) and Private Features,
-as illustrated below:
+as illustrated below::
 
     Header            Header            Header            Header
  +----------+  +-->+----------+  +-->+----------+  +-->+----------+
@@ -81,9 +84,9 @@ and release it using close().
 
 The following functions are exposed through ioctls:
 
- Get driver API version (DFL_FPGA_GET_API_VERSION)
- Check for extensions (DFL_FPGA_CHECK_EXTENSION)
- Program bitstream (DFL_FPGA_FME_PORT_PR)
+- Get driver API version (DFL_FPGA_GET_API_VERSION)
+- Check for extensions (DFL_FPGA_CHECK_EXTENSION)
+- Program bitstream (DFL_FPGA_FME_PORT_PR)
 
 More functions are exposed through sysfs
 (/sys/class/fpga_region/regionX/dfl-fme.n/):
@@ -118,18 +121,19 @@ port by using open() on the port device node and release it using close().
 
 The following functions are exposed through ioctls:
 
- Get driver API version (DFL_FPGA_GET_API_VERSION)
- Check for extensions (DFL_FPGA_CHECK_EXTENSION)
- Get port info (DFL_FPGA_PORT_GET_INFO)
- Get MMIO region info (DFL_FPGA_PORT_GET_REGION_INFO)
- Map DMA buffer (DFL_FPGA_PORT_DMA_MAP)
- Unmap DMA buffer (DFL_FPGA_PORT_DMA_UNMAP)
- Reset AFU (*DFL_FPGA_PORT_RESET)
+- Get driver API version (DFL_FPGA_GET_API_VERSION)
+- Check for extensions (DFL_FPGA_CHECK_EXTENSION)
+- Get port info (DFL_FPGA_PORT_GET_INFO)
+- Get MMIO region info (DFL_FPGA_PORT_GET_REGION_INFO)
+- Map DMA buffer (DFL_FPGA_PORT_DMA_MAP)
+- Unmap DMA buffer (DFL_FPGA_PORT_DMA_UNMAP)
+- Reset AFU (DFL_FPGA_PORT_RESET)
 
-*DFL_FPGA_PORT_RESET: reset the FPGA Port and its AFU. Userspace can do Port
-reset at any time, e.g. during DMA or Partial Reconfiguration. But it should
-never cause any system level issue, only functional failure (e.g. DMA or PR
-operation failure) and be recoverable from the failure.
+DFL_FPGA_PORT_RESET:
+  reset the FPGA Port and its AFU. Userspace can do Port
+  reset at any time, e.g. during DMA or Partial Reconfiguration. But it should
+  never cause any system level issue, only functional failure (e.g. DMA or PR
+  operation failure) and be recoverable from the failure.
 
 User-space applications can also mmap() accelerator MMIO regions.
 
@@ -143,6 +147,8 @@ More functions are exposed through sysfs:
 DFL Framework Overview
 ======================
 
+::
+
          +----------+    +--------+ +--------+ +--------+
          |   FME    |    |  AFU   | |  AFU   | |  AFU   |
          |  Module  |    | Module | | Module | | Module |
@@ -151,7 +157,7 @@ DFL Framework Overview
                  | FPGA Container Device |    Device Feature List
                  |  (FPGA Base Region)   |         Framework
                  +-----------------------+
---------------------------------------------------------------------
+  ------------------------------------------------------------------
                +----------------------------+
                |   FPGA DFL Device Module   |
                | (e.g. PCIE/Platform Device)|
@@ -220,7 +226,7 @@ the sysfs hierarchy under /sys/class/fpga_region.
 In the example below, two DFL based FPGA devices are installed in the host. Each
 fpga device has one FME and two ports (AFUs).
 
-FPGA regions are created under /sys/class/fpga_region/
+FPGA regions are created under /sys/class/fpga_region/::
 
 	/sys/class/fpga_region/region0
 	/sys/class/fpga_region/region1
@@ -231,7 +237,7 @@ Application needs to search each regionX folder, if feature device is found,
 (e.g. "dfl-port.n" or "dfl-fme.m" is found), then it's the base
 fpga region which represents the FPGA device.
 
-Each base region has one FME and two ports (AFUs) as child devices:
+Each base region has one FME and two ports (AFUs) as child devices::
 
 	/sys/class/fpga_region/region0/dfl-fme.0
 	/sys/class/fpga_region/region0/dfl-port.0
@@ -243,7 +249,7 @@ Each base region has one FME and two ports (AFUs) as child devices:
 	/sys/class/fpga_region/region3/dfl-port.3
 	...
 
-In general, the FME/AFU sysfs interfaces are named as follows:
+In general, the FME/AFU sysfs interfaces are named as follows::
 
 	/sys/class/fpga_region/<regionX>/<dfl-fme.n>/
 	/sys/class/fpga_region/<regionX>/<dfl-port.m>/
@@ -251,7 +257,7 @@ In general, the FME/AFU sysfs interfaces are named as follows:
 with 'n' consecutively numbering all FMEs and 'm' consecutively numbering all
 ports.
 
-The device nodes used for ioctl() or mmap() can be referenced through:
+The device nodes used for ioctl() or mmap() can be referenced through::
 
 	/sys/class/fpga_region/<regionX>/<dfl-fme.n>/dev
 	/sys/class/fpga_region/<regionX>/<dfl-port.n>/dev
diff --git a/Documentation/fpga/index.rst b/Documentation/fpga/index.rst
new file mode 100644
index 000000000000..2c87d1ea084f
--- /dev/null
+++ b/Documentation/fpga/index.rst
@@ -0,0 +1,17 @@
+:orphan:
+
+====
+fpga
+====
+
+.. toctree::
+    :maxdepth: 1
+
+    dfl
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/MAINTAINERS b/MAINTAINERS
index fac4490d2a00..3dd988519a11 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6186,7 +6186,7 @@ FPGA DFL DRIVERS
 M:	Wu Hao <hao.wu@intel.com>
 L:	linux-fpga@vger.kernel.org
 S:	Maintained
-F:	Documentation/fpga/dfl.txt
+F:	Documentation/fpga/dfl.rst
 F:	include/uapi/linux/fpga-dfl.h
 F:	drivers/fpga/dfl*
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 15/79] docs: gpio: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (13 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 14/79] docs: fpga: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-23 11:23     ` Linus Walleij
  2019-04-23 21:30     ` Linus Walleij
  2019-04-22 13:27   ` [PATCH v2 16/79] docs: ide: " Mauro Carvalho Chehab
                     ` (62 subsequent siblings)
  77 siblings, 2 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Linus Walleij, Bartosz Golaszewski, linux-gpio

The API described at sysfs.txt is deprecated.

Still, as it is still part of the Kernel (and will likely be
there for some time, as we don't simply remove APIs). So,
it makes sense to keep it there.

The conversion of this file is trivial:
  - add blank lines and identation in order to identify paragraphs;
  - mark a literal block as such.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/gpio/index.rst                | 17 +++++++++
 Documentation/gpio/{sysfs.txt => sysfs.rst} | 39 +++++++++++++--------
 2 files changed, 42 insertions(+), 14 deletions(-)
 create mode 100644 Documentation/gpio/index.rst
 rename Documentation/gpio/{sysfs.txt => sysfs.rst} (86%)

diff --git a/Documentation/gpio/index.rst b/Documentation/gpio/index.rst
new file mode 100644
index 000000000000..09a4a553f434
--- /dev/null
+++ b/Documentation/gpio/index.rst
@@ -0,0 +1,17 @@
+:orphan:
+
+====
+gpio
+====
+
+.. toctree::
+    :maxdepth: 1
+
+    sysfs
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/gpio/sysfs.txt b/Documentation/gpio/sysfs.rst
similarity index 86%
rename from Documentation/gpio/sysfs.txt
rename to Documentation/gpio/sysfs.rst
index 58eeab81f349..ec09ffd983e7 100644
--- a/Documentation/gpio/sysfs.txt
+++ b/Documentation/gpio/sysfs.rst
@@ -1,10 +1,12 @@
 GPIO Sysfs Interface for Userspace
 ==================================
 
-THIS ABI IS DEPRECATED, THE ABI DOCUMENTATION HAS BEEN MOVED TO
-Documentation/ABI/obsolete/sysfs-gpio AND NEW USERSPACE CONSUMERS
-ARE SUPPOSED TO USE THE CHARACTER DEVICE ABI. THIS OLD SYSFS ABI WILL
-NOT BE DEVELOPED (NO NEW FEATURES), IT WILL JUST BE MAINTAINED.
+.. warning::
+
+  THIS ABI IS DEPRECATED, THE ABI DOCUMENTATION HAS BEEN MOVED TO
+  Documentation/ABI/obsolete/sysfs-gpio AND NEW USERSPACE CONSUMERS
+  ARE SUPPOSED TO USE THE CHARACTER DEVICE ABI. THIS OLD SYSFS ABI WILL
+  NOT BE DEVELOPED (NO NEW FEATURES), IT WILL JUST BE MAINTAINED.
 
 Refer to the examples in tools/gpio/* for an introduction to the new
 character device ABI. Also see the userspace header in
@@ -51,13 +53,15 @@ The control interfaces are write-only:
 
     /sys/class/gpio/
 
-    	"export" ... Userspace may ask the kernel to export control of
+	"export" ...
+		Userspace may ask the kernel to export control of
 		a GPIO to userspace by writing its number to this file.
 
 		Example:  "echo 19 > export" will create a "gpio19" node
 		for GPIO #19, if that's not requested by kernel code.
 
-    	"unexport" ... Reverses the effect of exporting to userspace.
+	"unexport" ...
+		Reverses the effect of exporting to userspace.
 
 		Example:  "echo 19 > unexport" will remove a "gpio19"
 		node exported using the "export" file.
@@ -67,7 +71,8 @@ and have the following read/write attributes:
 
     /sys/class/gpio/gpioN/
 
-	"direction" ... reads as either "in" or "out". This value may
+	"direction" ...
+		reads as either "in" or "out". This value may
 		normally be written. Writing as "out" defaults to
 		initializing the value as low. To ensure glitch free
 		operation, values "low" and "high" may be written to
@@ -78,7 +83,8 @@ and have the following read/write attributes:
 		it was exported by kernel code that didn't explicitly
 		allow userspace to reconfigure this GPIO's direction.
 
-	"value" ... reads as either 0 (low) or 1 (high). If the GPIO
+	"value" ...
+		reads as either 0 (low) or 1 (high). If the GPIO
 		is configured as an output, this value may be written;
 		any nonzero value is treated as high.
 
@@ -92,14 +98,16 @@ and have the following read/write attributes:
 		file and read the new value or close the file and re-open it
 		to read the value.
 
-	"edge" ... reads as either "none", "rising", "falling", or
+	"edge" ...
+		reads as either "none", "rising", "falling", or
 		"both". Write these strings to select the signal edge(s)
 		that will make poll(2) on the "value" file return.
 
 		This file exists only if the pin can be configured as an
 		interrupt generating input pin.
 
-	"active_low" ... reads as either 0 (false) or 1 (true). Write
+	"active_low" ...
+		reads as either 0 (false) or 1 (true). Write
 		any nonzero value to invert the value attribute both
 		for reading and writing. Existing and subsequent
 		poll(2) support configuration via the edge attribute
@@ -112,11 +120,14 @@ read-only attributes:
 
     /sys/class/gpio/gpiochipN/
 
-    	"base" ... same as N, the first GPIO managed by this chip
+	"base" ...
+		same as N, the first GPIO managed by this chip
 
-    	"label" ... provided for diagnostics (not always unique)
+	"label" ...
+		provided for diagnostics (not always unique)
 
-        "ngpio" ... how many GPIOs this manages (N to N + ngpio - 1)
+	"ngpio" ...
+		how many GPIOs this manages (N to N + ngpio - 1)
 
 Board documentation should in most cases cover what GPIOs are used for
 what purposes. However, those numbers are not always stable; GPIOs on
@@ -129,7 +140,7 @@ the correct GPIO number to use for a given signal.
 Exporting from Kernel code
 --------------------------
 Kernel code can explicitly manage exports of GPIOs which have already been
-requested using gpio_request():
+requested using gpio_request()::
 
 	/* export the GPIO to userspace */
 	int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 16/79] docs: ide: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (14 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 15/79] docs: gpio: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 17/79] docs: infiniband: " Mauro Carvalho Chehab
                     ` (61 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Borislav Petkov, Jens Axboe, David S. Miller,
	Geert Uytterhoeven, linux-ide, linux-m68k

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../admin-guide/kernel-parameters.txt         |   2 +-
 Documentation/cdrom/ide-cd.rst                |  18 +--
 Documentation/ide/changelogs.rst              |  17 ++
 .../ide/{ide-tape.txt => ide-tape.rst}        |  23 +--
 Documentation/ide/{ide.txt => ide.rst}        | 147 ++++++++++--------
 Documentation/ide/index.rst                   |  21 +++
 ...arm-plug-howto.txt => warm-plug-howto.rst} |  10 +-
 arch/m68k/q40/README                          |   2 +-
 drivers/ide/Kconfig                           |  20 +--
 9 files changed, 155 insertions(+), 105 deletions(-)
 create mode 100644 Documentation/ide/changelogs.rst
 rename Documentation/ide/{ide-tape.txt => ide-tape.rst} (83%)
 rename Documentation/ide/{ide.txt => ide.rst} (72%)
 create mode 100644 Documentation/ide/index.rst
 rename Documentation/ide/{warm-plug-howto.txt => warm-plug-howto.rst} (61%)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index fce382aebf60..bfe926a7b15f 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1504,7 +1504,7 @@
 			Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
 			.vlb_clock .pci_clock .noflush .nohpa .noprobe .nowerr
 			.cdrom .chs .ignore_cable are additional options
-			See Documentation/ide/ide.txt.
+			See Documentation/ide/ide.rst.
 
 	ide-generic.probe-mask= [HW] (E)IDE subsystem
 			Format: <int>
diff --git a/Documentation/cdrom/ide-cd.rst b/Documentation/cdrom/ide-cd.rst
index dadc94ef6b6c..bdccb74fc92d 100644
--- a/Documentation/cdrom/ide-cd.rst
+++ b/Documentation/cdrom/ide-cd.rst
@@ -47,7 +47,7 @@ This driver provides the following features:
 ---------------
 
 0. The ide-cd relies on the ide disk driver.  See
-   Documentation/ide/ide.txt for up-to-date information on the ide
+   Documentation/ide/ide.rst for up-to-date information on the ide
    driver.
 
 1. Make sure that the ide and ide-cd drivers are compiled into the
@@ -62,7 +62,7 @@ This driver provides the following features:
 
    Depending on what type of IDE interface you have, you may need to
    specify additional configuration options.  See
-   Documentation/ide/ide.txt.
+   Documentation/ide/ide.rst.
 
 2. You should also ensure that the iso9660 filesystem is either
    compiled into the kernel or available as a loadable module.  You
@@ -82,7 +82,7 @@ This driver provides the following features:
    on the primary IDE interface are called `hda` and `hdb`,
    respectively.  The drives on the secondary interface are called
    `hdc` and `hdd`.  (Interfaces at other locations get other letters
-   in the third position; see Documentation/ide/ide.txt.)
+   in the third position; see Documentation/ide/ide.rst.)
 
    If you want your CDROM drive to be found automatically by the
    driver, you should make sure your IDE interface uses either the
@@ -91,7 +91,7 @@ This driver provides the following features:
    be jumpered as `master`.  (If for some reason you cannot configure
    your system in this manner, you can probably still use the driver.
    You may have to pass extra configuration information to the kernel
-   when you boot, however.  See Documentation/ide/ide.txt for more
+   when you boot, however.  See Documentation/ide/ide.rst for more
    information.)
 
 4. Boot the system.  If the drive is recognized, you should see a
@@ -163,7 +163,7 @@ to change.  If the slot number is -1, the drive is unloaded.
 This section discusses some common problems encountered when trying to
 use the driver, and some possible solutions.  Note that if you are
 experiencing problems, you should probably also review
-Documentation/ide/ide.txt for current information about the underlying
+Documentation/ide/ide.rst for current information about the underlying
 IDE support code.  Some of these items apply only to earlier versions
 of the driver, but are mentioned here for completeness.
 
@@ -173,7 +173,7 @@ from the driver.
 a. Drive is not detected during booting.
 
    - Review the configuration instructions above and in
-     Documentation/ide/ide.txt, and check how your hardware is
+     Documentation/ide/ide.rst, and check how your hardware is
      configured.
 
    - If your drive is the only device on an IDE interface, it should
@@ -181,7 +181,7 @@ a. Drive is not detected during booting.
 
    - If your IDE interface is not at the standard addresses of 0x170
      or 0x1f0, you'll need to explicitly inform the driver using a
-     lilo option.  See Documentation/ide/ide.txt.  (This feature was
+     lilo option.  See Documentation/ide/ide.rst.  (This feature was
      added around kernel version 1.3.30.)
 
    - If the autoprobing is not finding your drive, you can tell the
@@ -207,7 +207,7 @@ a. Drive is not detected during booting.
      Support for some interfaces needing extra initialization is
      provided in later 1.3.x kernels.  You may need to turn on
      additional kernel configuration options to get them to work;
-     see Documentation/ide/ide.txt.
+     see Documentation/ide/ide.rst.
 
      Even if support is not available for your interface, you may be
      able to get it to work with the following procedure.  First boot
@@ -261,7 +261,7 @@ c. System hangups.
     be worked around by specifying the `serialize` option when
     booting.  Recent kernels should be able to detect the need for
     this automatically in most cases, but the detection is not
-    foolproof.  See Documentation/ide/ide.txt for more information
+    foolproof.  See Documentation/ide/ide.rst for more information
     about the `serialize` option and the CMD640B.
 
   - Note that many MS-DOS CDROM drivers will work with such buggy
diff --git a/Documentation/ide/changelogs.rst b/Documentation/ide/changelogs.rst
new file mode 100644
index 000000000000..fdf9d0fb8027
--- /dev/null
+++ b/Documentation/ide/changelogs.rst
@@ -0,0 +1,17 @@
+Changelog for ide cd
+--------------------
+
+ .. include:: ChangeLog.ide-cd.1994-2004
+    :literal:
+
+Changelog for ide floppy
+------------------------
+
+ .. include:: ChangeLog.ide-floppy.1996-2002
+    :literal:
+
+Changelog for ide tape
+----------------------
+
+ .. include:: ChangeLog.ide-tape.1995-2002
+    :literal:
diff --git a/Documentation/ide/ide-tape.txt b/Documentation/ide/ide-tape.rst
similarity index 83%
rename from Documentation/ide/ide-tape.txt
rename to Documentation/ide/ide-tape.rst
index 3f348a0b21d8..3e061d9c0e38 100644
--- a/Documentation/ide/ide-tape.txt
+++ b/Documentation/ide/ide-tape.rst
@@ -1,4 +1,6 @@
-IDE ATAPI streaming tape driver.
+===============================
+IDE ATAPI streaming tape driver
+===============================
 
 This driver is a part of the Linux ide driver.
 
@@ -10,14 +12,14 @@ to the request-list of the block device, and waits for their completion.
 The block device major and minor numbers are determined from the
 tape's relative position in the ide interfaces, as explained in ide.c.
 
-The character device interface consists of the following devices:
+The character device interface consists of the following devices::
 
-ht0		major 37, minor 0	first  IDE tape, rewind on close.
-ht1		major 37, minor 1	second IDE tape, rewind on close.
-...
-nht0		major 37, minor 128	first  IDE tape, no rewind on close.
-nht1		major 37, minor 129	second IDE tape, no rewind on close.
-...
+  ht0		major 37, minor 0	first  IDE tape, rewind on close.
+  ht1		major 37, minor 1	second IDE tape, rewind on close.
+  ...
+  nht0		major 37, minor 128	first  IDE tape, no rewind on close.
+  nht1		major 37, minor 129	second IDE tape, no rewind on close.
+  ...
 
 The general magnetic tape commands compatible interface, as defined by
 include/linux/mtio.h, is accessible through the character device.
@@ -40,9 +42,10 @@ Testing was done with a 2 GB CONNER CTMA 4000 IDE ATAPI Streaming Tape Drive.
 Here are some words from the first releases of hd.c, which are quoted
 in ide.c and apply here as well:
 
-| Special care is recommended.  Have Fun!
+* Special care is recommended.  Have Fun!
 
-Possible improvements:
+Possible improvements
+=====================
 
 1. Support for the ATAPI overlap protocol.
 
diff --git a/Documentation/ide/ide.txt b/Documentation/ide/ide.rst
similarity index 72%
rename from Documentation/ide/ide.txt
rename to Documentation/ide/ide.rst
index 7aca987c23d9..88bdcba92f7d 100644
--- a/Documentation/ide/ide.txt
+++ b/Documentation/ide/ide.rst
@@ -1,41 +1,43 @@
-
-	Information regarding the Enhanced IDE drive in Linux 2.6
-
-==============================================================================
-
+============================================
+Information regarding the Enhanced IDE drive
+============================================
 
    The hdparm utility can be used to control various IDE features on a
    running system. It is packaged separately.  Please Look for it on popular
    linux FTP sites.
 
+-------------------------------------------------------------------------------
 
+.. important::
 
-***  IMPORTANT NOTICES:  BUGGY IDE CHIPSETS CAN CORRUPT DATA!!
-***  =================
-***  PCI versions of the CMD640 and RZ1000 interfaces are now detected
-***  automatically at startup when PCI BIOS support is configured.
-***
-***  Linux disables the "prefetch" ("readahead") mode of the RZ1000
-***  to prevent data corruption possible due to hardware design flaws.
-***
-***  For the CMD640, linux disables "IRQ unmasking" (hdparm -u1) on any
-***  drive for which the "prefetch" mode of the CMD640 is turned on.
-***  If "prefetch" is disabled (hdparm -p8), then "IRQ unmasking" can be
-***  used again.
-***
-***  For the CMD640, linux disables "32bit I/O" (hdparm -c1) on any drive
-***  for which the "prefetch" mode of the CMD640 is turned off.
-***  If "prefetch" is enabled (hdparm -p9), then "32bit I/O" can be
-***  used again.
-***
-***  The CMD640 is also used on some Vesa Local Bus (VLB) cards, and is *NOT*
-***  automatically detected by Linux.  For safe, reliable operation with such
-***  interfaces, one *MUST* use the "cmd640.probe_vlb" kernel option.
-***
-***  Use of the "serialize" option is no longer necessary.
-
-================================================================================
-Common pitfalls:
+   BUGGY IDE CHIPSETS CAN CORRUPT DATA!!
+
+    PCI versions of the CMD640 and RZ1000 interfaces are now detected
+    automatically at startup when PCI BIOS support is configured.
+
+    Linux disables the "prefetch" ("readahead") mode of the RZ1000
+    to prevent data corruption possible due to hardware design flaws.
+
+    For the CMD640, linux disables "IRQ unmasking" (hdparm -u1) on any
+    drive for which the "prefetch" mode of the CMD640 is turned on.
+    If "prefetch" is disabled (hdparm -p8), then "IRQ unmasking" can be
+    used again.
+
+    For the CMD640, linux disables "32bit I/O" (hdparm -c1) on any drive
+    for which the "prefetch" mode of the CMD640 is turned off.
+    If "prefetch" is enabled (hdparm -p9), then "32bit I/O" can be
+    used again.
+
+    The CMD640 is also used on some Vesa Local Bus (VLB) cards, and is *NOT*
+    automatically detected by Linux.  For safe, reliable operation with such
+    interfaces, one *MUST* use the "cmd640.probe_vlb" kernel option.
+
+    Use of the "serialize" option is no longer necessary.
+
+-------------------------------------------------------------------------------
+
+Common pitfalls
+===============
 
 - 40-conductor IDE cables are capable of transferring data in DMA modes up to
   udma2, but no faster.
@@ -49,19 +51,18 @@ Common pitfalls:
 - Even better try to stick to the same vendor and device type on the same
   cable.
 
-================================================================================
-
-This is the multiple IDE interface driver, as evolved from hd.c.
+This is the multiple IDE interface driver, as evolved from hd.c
+===============================================================
 
 It supports up to 9 IDE interfaces per default, on one or more IRQs (usually
-14 & 15).  There can be up to two drives per interface, as per the ATA-6 spec.
+14 & 15).  There can be up to two drives per interface, as per the ATA-6 spec.::
 
-Primary:    ide0, port 0x1f0; major=3;  hda is minor=0; hdb is minor=64
-Secondary:  ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64
-Tertiary:   ide2, port 0x1e8; major=33; hde is minor=0; hdf is minor=64
-Quaternary: ide3, port 0x168; major=34; hdg is minor=0; hdh is minor=64
-fifth..     ide4, usually PCI, probed
-sixth..     ide5, usually PCI, probed
+  Primary:    ide0, port 0x1f0; major=3;  hda is minor=0; hdb is minor=64
+  Secondary:  ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64
+  Tertiary:   ide2, port 0x1e8; major=33; hde is minor=0; hdf is minor=64
+  Quaternary: ide3, port 0x168; major=34; hdg is minor=0; hdh is minor=64
+  fifth..     ide4, usually PCI, probed
+  sixth..     ide5, usually PCI, probed
 
 To access devices on interfaces > ide0, device entries please make sure that
 device files for them are present in /dev.  If not, please create such
@@ -80,12 +81,15 @@ seldom occurs.  Be careful, and if in doubt, don't do it!
 
 Drives are normally found by auto-probing and/or examining the CMOS/BIOS data.
 For really weird situations, the apparent (fdisk) geometry can also be specified
-on the kernel "command line" using LILO.  The format of such lines is:
+on the kernel "command line" using LILO.  The format of such lines is::
 
 	ide_core.chs=[interface_number.device_number]:cyls,heads,sects
-or	ide_core.cdrom=[interface_number.device_number]
 
-For example:
+or::
+
+	ide_core.cdrom=[interface_number.device_number]
+
+For example::
 
 	ide_core.chs=1.0:1050,32,64  ide_core.cdrom=1.1
 
@@ -96,10 +100,12 @@ geometry for partitioning purposes (fdisk).
 If the auto-probing during boot time confuses a drive (ie. the drive works
 with hd.c but not with ide.c), then an command line option may be specified
 for each drive for which you'd like the drive to skip the hardware
-probe/identification sequence.  For example:
+probe/identification sequence.  For example::
 
 	ide_core.noprobe=0.1
-or
+
+or::
+
 	ide_core.chs=1.0:768,16,32
 	ide_core.noprobe=1.0
 
@@ -115,22 +121,24 @@ Such drives will be identified at boot time, just like a hard disk.
 
 If for some reason your cdrom drive is *not* found at boot time, you can force
 the probe to look harder by supplying a kernel command line parameter
-via LILO, such as:
+via LILO, such as:::
 
 	ide_core.cdrom=1.0	/* "master" on second interface (hdc) */
-or
+
+or::
+
 	ide_core.cdrom=1.1	/* "slave" on second interface (hdd) */
 
 For example, a GW2000 system might have a hard drive on the primary
 interface (/dev/hda) and an IDE cdrom drive on the secondary interface
-(/dev/hdc).  To mount a CD in the cdrom drive, one would use something like:
+(/dev/hdc).  To mount a CD in the cdrom drive, one would use something like::
 
 	ln -sf /dev/hdc /dev/cdrom
 	mkdir /mnt/cdrom
 	mount /dev/cdrom /mnt/cdrom -t iso9660 -o ro
 
 If, after doing all of the above, mount doesn't work and you see
-errors from the driver (with dmesg) complaining about `status=0xff',
+errors from the driver (with dmesg) complaining about `status=0xff`,
 this means that the hardware is not responding to the driver's attempts
 to read it.  One of the following is probably the problem:
 
@@ -165,7 +173,7 @@ drivers can always be compiled as loadable modules, the chipset drivers
 can only be compiled into the kernel, and the core code (ide.c) can be
 compiled as a loadable module provided no chipset support is needed.
 
-When using ide.c as a module in combination with kmod, add:
+When using ide.c as a module in combination with kmod, add::
 
 	alias block-major-3 ide-probe
 
@@ -176,10 +184,8 @@ driver using the "options=" keyword to insmod, while replacing any ',' with
 ';'.
 
 
-================================================================================
-
 Summary of ide driver parameters for kernel command line
---------------------------------------------------------
+========================================================
 
 For legacy IDE VLB host drivers (ali14xx/dtc2278/ht6560b/qd65xx/umc8672)
 you need to explicitly enable probing by using "probe" kernel parameter,
@@ -226,28 +232,31 @@ Other kernel parameters for ide_core are:
 
 * "chs=[interface_number.device_number]" to force device as a disk (using CHS)
 
-================================================================================
 
 Some Terminology
-----------------
-IDE = Integrated Drive Electronics, meaning that each drive has a built-in
-controller, which is why an "IDE interface card" is not a "controller card".
+================
 
-ATA = AT (the old IBM 286 computer) Attachment Interface, a draft American
-National Standard for connecting hard drives to PCs.  This is the official
-name for "IDE".
+IDE
+  Integrated Drive Electronics, meaning that each drive has a built-in
+  controller, which is why an "IDE interface card" is not a "controller card".
 
-The latest standards define some enhancements, known as the ATA-6 spec,
-which grew out of vendor-specific "Enhanced IDE" (EIDE) implementations.
+ATA
+  AT (the old IBM 286 computer) Attachment Interface, a draft American
+  National Standard for connecting hard drives to PCs.  This is the official
+  name for "IDE".
 
-ATAPI = ATA Packet Interface, a new protocol for controlling the drives,
-similar to SCSI protocols, created at the same time as the ATA2 standard.
-ATAPI is currently used for controlling CDROM, TAPE and FLOPPY (ZIP or
-LS120/240) devices, removable R/W cartridges, and for high capacity hard disk
-drives.
+  The latest standards define some enhancements, known as the ATA-6 spec,
+  which grew out of vendor-specific "Enhanced IDE" (EIDE) implementations.
+
+ATAPI
+  ATA Packet Interface, a new protocol for controlling the drives,
+  similar to SCSI protocols, created at the same time as the ATA2 standard.
+  ATAPI is currently used for controlling CDROM, TAPE and FLOPPY (ZIP or
+  LS120/240) devices, removable R/W cartridges, and for high capacity hard disk
+  drives.
 
 mlord@pobox.com
---
+
 
 Wed Apr 17 22:52:44 CEST 2002 edited by Marcin Dalecki, the current
 maintainer.
diff --git a/Documentation/ide/index.rst b/Documentation/ide/index.rst
new file mode 100644
index 000000000000..45bc12d3957f
--- /dev/null
+++ b/Documentation/ide/index.rst
@@ -0,0 +1,21 @@
+:orphan:
+
+==================================
+Integrated Drive Electronics (IDE)
+==================================
+
+.. toctree::
+    :maxdepth: 1
+
+    ide
+    ide-tape
+    warm-plug-howto
+
+    changelogs
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/ide/warm-plug-howto.txt b/Documentation/ide/warm-plug-howto.rst
similarity index 61%
rename from Documentation/ide/warm-plug-howto.txt
rename to Documentation/ide/warm-plug-howto.rst
index 98152bcd515a..c245242ef2f1 100644
--- a/Documentation/ide/warm-plug-howto.txt
+++ b/Documentation/ide/warm-plug-howto.rst
@@ -1,14 +1,14 @@
-
+===================
 IDE warm-plug HOWTO
 ===================
 
-To warm-plug devices on a port 'idex':
+To warm-plug devices on a port 'idex'::
 
-# echo -n "1" > /sys/class/ide_port/idex/delete_devices
+	# echo -n "1" > /sys/class/ide_port/idex/delete_devices
 
-unplug old device(s) and plug new device(s)
+unplug old device(s) and plug new device(s)::
 
-# echo -n "1" > /sys/class/ide_port/idex/scan
+	# echo -n "1" > /sys/class/ide_port/idex/scan
 
 done
 
diff --git a/arch/m68k/q40/README b/arch/m68k/q40/README
index 93f4c4cd3c45..a4991d2d8af6 100644
--- a/arch/m68k/q40/README
+++ b/arch/m68k/q40/README
@@ -31,7 +31,7 @@ drivers used by the Q40, apart from the very obvious (console etc.):
 		char/joystick/*		# most of this should work, not
 				        # in default config.in
 	        block/q40ide.c		# startup for ide
-		      ide*		# see Documentation/ide/ide.txt
+		      ide*		# see Documentation/ide/ide.rst
 		      floppy.c		# normal PC driver, DMA emu in asm/floppy.h
 					# and arch/m68k/kernel/entry.S
 					# see drivers/block/README.fd
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 19fcd0756f46..6683010b59cb 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -24,13 +24,13 @@ menuconfig IDE
 	  To compile this driver as a module, choose M here: the
 	  module will be called ide-core.
 
-	  For further information, please read <file:Documentation/ide/ide.txt>.
+	  For further information, please read <file:Documentation/ide/ide.rst>.
 
 	  If unsure, say N.
 
 if IDE
 
-comment "Please see Documentation/ide/ide.txt for help/info on IDE drives"
+comment "Please see Documentation/ide/ide.rst for help/info on IDE drives"
 
 config IDE_XFER_MODE
 	bool
@@ -162,7 +162,7 @@ config BLK_DEV_IDETAPE
 	  along with other IDE devices, as "hdb" or "hdc", or something
 	  similar, and will be mapped to a character device such as "ht0"
 	  (check the boot messages with dmesg).  Be sure to consult the
-	  <file:drivers/ide/ide-tape.c> and <file:Documentation/ide/ide.txt>
+	  <file:drivers/ide/ide-tape.c> and <file:Documentation/ide/ide.rst>
 	  files for usage information.
 
 	  To compile this driver as a module, choose M here: the
@@ -250,7 +250,7 @@ config BLK_DEV_CMD640
 
 	  The CMD640 chip is also used on add-in cards by Acculogic, and on
 	  the "CSA-6400E PCI to IDE controller" that some people have. For
-	  details, read <file:Documentation/ide/ide.txt>.
+	  details, read <file:Documentation/ide/ide.rst>.
 
 config BLK_DEV_CMD640_ENHANCED
 	bool "CMD640 enhanced support"
@@ -258,7 +258,7 @@ config BLK_DEV_CMD640_ENHANCED
 	help
 	  This option includes support for setting/autotuning PIO modes and
 	  prefetch on CMD640 IDE interfaces.  For details, read
-	  <file:Documentation/ide/ide.txt>. If you have a CMD640 IDE interface
+	  <file:Documentation/ide/ide.rst>. If you have a CMD640 IDE interface
 	  and your BIOS does not already do this for you, then say Y here.
 	  Otherwise say N.
 
@@ -818,7 +818,7 @@ config BLK_DEV_ALI14XX
 	  boot parameter.  It enables support for the secondary IDE interface
 	  of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
 	  I/O speeds to be set as well.
-	  See the files <file:Documentation/ide/ide.txt> and
+	  See the files <file:Documentation/ide/ide.rst> and
 	  <file:drivers/ide/ali14xx.c> for more info.
 
 config BLK_DEV_DTC2278
@@ -829,7 +829,7 @@ config BLK_DEV_DTC2278
 	  This driver is enabled at runtime using the "dtc2278.probe" kernel
 	  boot parameter. It enables support for the secondary IDE interface
 	  of the DTC-2278 card, and permits faster I/O speeds to be set as
-	  well. See the <file:Documentation/ide/ide.txt> and
+	  well. See the <file:Documentation/ide/ide.rst> and
 	  <file:drivers/ide/dtc2278.c> files for more info.
 
 config BLK_DEV_HT6560B
@@ -840,7 +840,7 @@ config BLK_DEV_HT6560B
 	  This driver is enabled at runtime using the "ht6560b.probe" kernel
 	  boot parameter. It enables support for the secondary IDE interface
 	  of the Holtek card, and permits faster I/O speeds to be set as well.
-	  See the <file:Documentation/ide/ide.txt> and
+	  See the <file:Documentation/ide/ide.rst> and
 	  <file:drivers/ide/ht6560b.c> files for more info.
 
 config BLK_DEV_QD65XX
@@ -850,7 +850,7 @@ config BLK_DEV_QD65XX
 	help
 	  This driver is enabled at runtime using the "qd65xx.probe" kernel
 	  boot parameter.  It permits faster I/O speeds to be set.  See the
-	  <file:Documentation/ide/ide.txt> and <file:drivers/ide/qd65xx.c>
+	  <file:Documentation/ide/ide.rst> and <file:drivers/ide/qd65xx.c>
 	  for more info.
 
 config BLK_DEV_UMC8672
@@ -861,7 +861,7 @@ config BLK_DEV_UMC8672
 	  This driver is enabled at runtime using the "umc8672.probe" kernel
 	  boot parameter. It enables support for the secondary IDE interface
 	  of the UMC-8672, and permits faster I/O speeds to be set as well.
-	  See the files <file:Documentation/ide/ide.txt> and
+	  See the files <file:Documentation/ide/ide.rst> and
 	  <file:drivers/ide/umc8672.c> for more info.
 
 endif
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 17/79] docs: infiniband: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (15 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 16/79] docs: ide: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 19/79] docs: kdump: " Mauro Carvalho Chehab
                     ` (60 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Doug Ledford, Jason Gunthorpe, linux-rdma

The InfiniBand docs are plain text with no markups.
So, all we needed to do were to add the title markups and
some markup sequences in order to properly parse tables,
lists and literal blocks.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../{core_locking.txt => core_locking.rst}    |  64 ++++++-----
 Documentation/infiniband/index.rst            |  23 ++++
 .../infiniband/{ipoib.txt => ipoib.rst}       |  24 ++--
 .../infiniband/{opa_vnic.txt => opa_vnic.rst} | 108 +++++++++---------
 .../infiniband/{sysfs.txt => sysfs.rst}       |   4 +-
 .../{tag_matching.txt => tag_matching.rst}    |   5 +
 .../infiniband/{user_mad.txt => user_mad.rst} |  33 ++++--
 .../{user_verbs.txt => user_verbs.rst}        |  12 +-
 drivers/infiniband/core/user_mad.c            |   2 +-
 drivers/infiniband/ulp/ipoib/Kconfig          |   2 +-
 10 files changed, 174 insertions(+), 103 deletions(-)
 rename Documentation/infiniband/{core_locking.txt => core_locking.rst} (78%)
 create mode 100644 Documentation/infiniband/index.rst
 rename Documentation/infiniband/{ipoib.txt => ipoib.rst} (90%)
 rename Documentation/infiniband/{opa_vnic.txt => opa_vnic.rst} (63%)
 rename Documentation/infiniband/{sysfs.txt => sysfs.rst} (69%)
 rename Documentation/infiniband/{tag_matching.txt => tag_matching.rst} (98%)
 rename Documentation/infiniband/{user_mad.txt => user_mad.rst} (90%)
 rename Documentation/infiniband/{user_verbs.txt => user_verbs.rst} (93%)

diff --git a/Documentation/infiniband/core_locking.txt b/Documentation/infiniband/core_locking.rst
similarity index 78%
rename from Documentation/infiniband/core_locking.txt
rename to Documentation/infiniband/core_locking.rst
index 4b1f36b6ada0..f34669beb4fe 100644
--- a/Documentation/infiniband/core_locking.txt
+++ b/Documentation/infiniband/core_locking.rst
@@ -1,4 +1,6 @@
-INFINIBAND MIDLAYER LOCKING
+===========================
+InfiniBand Midlayer Locking
+===========================
 
   This guide is an attempt to make explicit the locking assumptions
   made by the InfiniBand midlayer.  It describes the requirements on
@@ -6,45 +8,47 @@ INFINIBAND MIDLAYER LOCKING
   protocols that use the midlayer.
 
 Sleeping and interrupt context
+==============================
 
   With the following exceptions, a low-level driver implementation of
   all of the methods in struct ib_device may sleep.  The exceptions
   are any methods from the list:
 
-    create_ah
-    modify_ah
-    query_ah
-    destroy_ah
-    post_send
-    post_recv
-    poll_cq
-    req_notify_cq
-    map_phys_fmr
+    - create_ah
+    - modify_ah
+    - query_ah
+    - destroy_ah
+    - post_send
+    - post_recv
+    - poll_cq
+    - req_notify_cq
+    - map_phys_fmr
 
   which may not sleep and must be callable from any context.
 
   The corresponding functions exported to upper level protocol
   consumers:
 
-    ib_create_ah
-    ib_modify_ah
-    ib_query_ah
-    ib_destroy_ah
-    ib_post_send
-    ib_post_recv
-    ib_req_notify_cq
-    ib_map_phys_fmr
+    - ib_create_ah
+    - ib_modify_ah
+    - ib_query_ah
+    - ib_destroy_ah
+    - ib_post_send
+    - ib_post_recv
+    - ib_req_notify_cq
+    - ib_map_phys_fmr
 
   are therefore safe to call from any context.
 
   In addition, the function
 
-    ib_dispatch_event
+    - ib_dispatch_event
 
   used by low-level drivers to dispatch asynchronous events through
   the midlayer is also safe to call from any context.
 
 Reentrancy
+----------
 
   All of the methods in struct ib_device exported by a low-level
   driver must be fully reentrant.  The low-level driver is required to
@@ -62,6 +66,7 @@ Reentrancy
   information between different calls of ib_poll_cq() is not defined.
 
 Callbacks
+---------
 
   A low-level driver must not perform a callback directly from the
   same callchain as an ib_device method call.  For example, it is not
@@ -74,18 +79,18 @@ Callbacks
   completion event handlers for the same CQ are not called
   simultaneously.  The driver must guarantee that only one CQ event
   handler for a given CQ is running at a time.  In other words, the
-  following situation is not allowed:
+  following situation is not allowed::
 
-        CPU1                                    CPU2
+          CPU1                                    CPU2
 
-  low-level driver ->
-    consumer CQ event callback:
-      /* ... */
-      ib_req_notify_cq(cq, ...);
-                                        low-level driver ->
-      /* ... */                           consumer CQ event callback:
-                                            /* ... */
-      return from CQ event handler
+    low-level driver ->
+      consumer CQ event callback:
+        /* ... */
+        ib_req_notify_cq(cq, ...);
+                                          low-level driver ->
+        /* ... */                           consumer CQ event callback:
+                                              /* ... */
+        return from CQ event handler
 
   The context in which completion event and asynchronous event
   callbacks run is not defined.  Depending on the low-level driver, it
@@ -93,6 +98,7 @@ Callbacks
   Upper level protocol consumers may not sleep in a callback.
 
 Hot-plug
+--------
 
   A low-level driver announces that a device is ready for use by
   consumers when it calls ib_register_device(), all initialization
diff --git a/Documentation/infiniband/index.rst b/Documentation/infiniband/index.rst
new file mode 100644
index 000000000000..22eea64de722
--- /dev/null
+++ b/Documentation/infiniband/index.rst
@@ -0,0 +1,23 @@
+:orphan:
+
+==========
+InfiniBand
+==========
+
+.. toctree::
+   :maxdepth: 1
+
+   core_locking
+   ipoib
+   opa_vnic
+   sysfs
+   tag_matching
+   user_mad
+   user_verbs
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/infiniband/ipoib.txt b/Documentation/infiniband/ipoib.rst
similarity index 90%
rename from Documentation/infiniband/ipoib.txt
rename to Documentation/infiniband/ipoib.rst
index 47c1dd9818f2..0dd36154c0c9 100644
--- a/Documentation/infiniband/ipoib.txt
+++ b/Documentation/infiniband/ipoib.rst
@@ -1,4 +1,6 @@
-IP OVER INFINIBAND
+==================
+IP over InfiniBand
+==================
 
   The ib_ipoib driver is an implementation of the IP over InfiniBand
   protocol as specified by RFC 4391 and 4392, issued by the IETF ipoib
@@ -8,16 +10,17 @@ IP OVER INFINIBAND
   masqueraded to the kernel as ethernet interfaces).
 
 Partitions and P_Keys
+=====================
 
   When the IPoIB driver is loaded, it creates one interface for each
   port using the P_Key at index 0.  To create an interface with a
   different P_Key, write the desired P_Key into the main interface's
-  /sys/class/net/<intf name>/create_child file.  For example:
+  /sys/class/net/<intf name>/create_child file.  For example::
 
     echo 0x8001 > /sys/class/net/ib0/create_child
 
   This will create an interface named ib0.8001 with P_Key 0x8001.  To
-  remove a subinterface, use the "delete_child" file:
+  remove a subinterface, use the "delete_child" file::
 
     echo 0x8001 > /sys/class/net/ib0/delete_child
 
@@ -28,6 +31,7 @@ Partitions and P_Keys
   rtnl_link_ops, where children created using either way behave the same.
 
 Datagram vs Connected modes
+===========================
 
   The IPoIB driver supports two modes of operation: datagram and
   connected.  The mode is set and read through an interface's
@@ -51,6 +55,7 @@ Datagram vs Connected modes
   networking stack to use the smaller UD MTU for these neighbours.
 
 Stateless offloads
+==================
 
   If the IB HW supports IPoIB stateless offloads, IPoIB advertises
   TCP/IP checksum and/or Large Send (LSO) offloading capability to the
@@ -60,9 +65,10 @@ Stateless offloads
   on/off using ethtool calls.  Currently LRO is supported only for
   checksum offload capable devices.
 
-  Stateless offloads are supported only in datagram mode.  
+  Stateless offloads are supported only in datagram mode.
 
 Interrupt moderation
+====================
 
   If the underlying IB device supports CQ event moderation, one can
   use ethtool to set interrupt mitigation parameters and thus reduce
@@ -71,6 +77,7 @@ Interrupt moderation
   moderation is supported.
 
 Debugging Information
+=====================
 
   By compiling the IPoIB driver with CONFIG_INFINIBAND_IPOIB_DEBUG set
   to 'y', tracing messages are compiled into the driver.  They are
@@ -79,7 +86,7 @@ Debugging Information
   runtime through files in /sys/module/ib_ipoib/.
 
   CONFIG_INFINIBAND_IPOIB_DEBUG also enables files in the debugfs
-  virtual filesystem.  By mounting this filesystem, for example with
+  virtual filesystem.  By mounting this filesystem, for example with::
 
     mount -t debugfs none /sys/kernel/debug
 
@@ -96,10 +103,13 @@ Debugging Information
   performance, because it adds tests to the fast path.
 
 References
+==========
 
   Transmission of IP over InfiniBand (IPoIB) (RFC 4391)
-    http://ietf.org/rfc/rfc4391.txt 
+    http://ietf.org/rfc/rfc4391.txt
+
   IP over InfiniBand (IPoIB) Architecture (RFC 4392)
-    http://ietf.org/rfc/rfc4392.txt 
+    http://ietf.org/rfc/rfc4392.txt
+
   IP over InfiniBand: Connected Mode (RFC 4755)
     http://ietf.org/rfc/rfc4755.txt
diff --git a/Documentation/infiniband/opa_vnic.txt b/Documentation/infiniband/opa_vnic.rst
similarity index 63%
rename from Documentation/infiniband/opa_vnic.txt
rename to Documentation/infiniband/opa_vnic.rst
index 282e17be798a..2f888d9ffec0 100644
--- a/Documentation/infiniband/opa_vnic.txt
+++ b/Documentation/infiniband/opa_vnic.rst
@@ -1,3 +1,7 @@
+=================================================================
+Intel Omni-Path (OPA) Virtual Network Interface Controller (VNIC)
+=================================================================
+
 Intel Omni-Path (OPA) Virtual Network Interface Controller (VNIC) feature
 supports Ethernet functionality over Omni-Path fabric by encapsulating
 the Ethernet packets between HFI nodes.
@@ -17,70 +21,72 @@ an independent Ethernet network. The configuration is performed by an
 Ethernet Manager (EM) which is part of the trusted Fabric Manager (FM)
 application. HFI nodes can have multiple VNICs each connected to a
 different virtual Ethernet switch. The below diagram presents a case
-of two virtual Ethernet switches with two HFI nodes.
+of two virtual Ethernet switches with two HFI nodes::
 
-                             +-------------------+
-                             |      Subnet/      |
-                             |     Ethernet      |
-                             |      Manager      |
-                             +-------------------+
-                                /          /
-                              /           /
-                            /            /
-                          /             /
-+-----------------------------+  +------------------------------+
-|  Virtual Ethernet Switch    |  |  Virtual Ethernet Switch     |
-|  +---------+    +---------+ |  | +---------+    +---------+   |
-|  | VPORT   |    |  VPORT  | |  | |  VPORT  |    |  VPORT  |   |
-+--+---------+----+---------+-+  +-+---------+----+---------+---+
-         |                 \        /                 |
-         |                   \    /                   |
-         |                     \/                     |
-         |                    /  \                    |
-         |                  /      \                  |
-     +-----------+------------+  +-----------+------------+
-     |   VNIC    |    VNIC    |  |    VNIC   |    VNIC    |
-     +-----------+------------+  +-----------+------------+
-     |          HFI           |  |          HFI           |
-     +------------------------+  +------------------------+
+                               +-------------------+
+                               |      Subnet/      |
+                               |     Ethernet      |
+                               |      Manager      |
+                               +-------------------+
+                                  /          /
+                                /           /
+                              /            /
+                            /             /
+  +-----------------------------+  +------------------------------+
+  |  Virtual Ethernet Switch    |  |  Virtual Ethernet Switch     |
+  |  +---------+    +---------+ |  | +---------+    +---------+   |
+  |  | VPORT   |    |  VPORT  | |  | |  VPORT  |    |  VPORT  |   |
+  +--+---------+----+---------+-+  +-+---------+----+---------+---+
+           |                 \        /                 |
+           |                   \    /                   |
+           |                     \/                     |
+           |                    /  \                    |
+           |                  /      \                  |
+       +-----------+------------+  +-----------+------------+
+       |   VNIC    |    VNIC    |  |    VNIC   |    VNIC    |
+       +-----------+------------+  +-----------+------------+
+       |          HFI           |  |          HFI           |
+       +------------------------+  +------------------------+
 
 
 The Omni-Path encapsulated Ethernet packet format is as described below.
 
-Bits          Field
-------------------------------------
+==================== ================================
+Bits                 Field
+==================== ================================
 Quad Word 0:
-0-19      SLID (lower 20 bits)
-20-30     Length (in Quad Words)
-31        BECN bit
-32-51     DLID (lower 20 bits)
-52-56     SC (Service Class)
-57-59     RC (Routing Control)
-60        FECN bit
-61-62     L2 (=10, 16B format)
-63        LT (=1, Link Transfer Head Flit)
+0-19                 SLID (lower 20 bits)
+20-30                Length (in Quad Words)
+31                   BECN bit
+32-51                DLID (lower 20 bits)
+52-56                SC (Service Class)
+57-59                RC (Routing Control)
+60                   FECN bit
+61-62                L2 (=10, 16B format)
+63                   LT (=1, Link Transfer Head Flit)
 
 Quad Word 1:
-0-7       L4 type (=0x78 ETHERNET)
-8-11      SLID[23:20]
-12-15     DLID[23:20]
-16-31     PKEY
-32-47     Entropy
-48-63     Reserved
+0-7                  L4 type (=0x78 ETHERNET)
+8-11                 SLID[23:20]
+12-15                DLID[23:20]
+16-31                PKEY
+32-47                Entropy
+48-63                Reserved
 
 Quad Word 2:
-0-15      Reserved
-16-31     L4 header
-32-63     Ethernet Packet
+0-15                 Reserved
+16-31                L4 header
+32-63                Ethernet Packet
 
 Quad Words 3 to N-1:
-0-63      Ethernet packet (pad extended)
+0-63                 Ethernet packet (pad extended)
 
 Quad Word N (last):
-0-23      Ethernet packet (pad extended)
-24-55     ICRC
-56-61     Tail
-62-63     LT (=01, Link Transfer Tail Flit)
+0-23                 Ethernet packet (pad extended)
+24-55                ICRC
+56-61                Tail
+62-63                LT (=01, Link Transfer Tail Flit)
+==================== ================================
 
 Ethernet packet is padded on the transmit side to ensure that the VNIC OPA
 packet is quad word aligned. The 'Tail' field contains the number of bytes
@@ -123,7 +129,7 @@ operation. It also handles the encapsulation of Ethernet packets with an
 Omni-Path header in the transmit path. For each VNIC interface, the
 information required for encapsulation is configured by the EM via VEMA MAD
 interface. It also passes any control information to the HW dependent driver
-by invoking the RDMA netdev control operations.
+by invoking the RDMA netdev control operations::
 
         +-------------------+ +----------------------+
         |                   | |       Linux          |
diff --git a/Documentation/infiniband/sysfs.txt b/Documentation/infiniband/sysfs.rst
similarity index 69%
rename from Documentation/infiniband/sysfs.txt
rename to Documentation/infiniband/sysfs.rst
index 9fab5062f84b..f0abd6fa48f4 100644
--- a/Documentation/infiniband/sysfs.txt
+++ b/Documentation/infiniband/sysfs.rst
@@ -1,4 +1,6 @@
-SYSFS FILES
+===========
+Sysfs files
+===========
 
 The sysfs interface has moved to
 Documentation/ABI/stable/sysfs-class-infiniband.
diff --git a/Documentation/infiniband/tag_matching.txt b/Documentation/infiniband/tag_matching.rst
similarity index 98%
rename from Documentation/infiniband/tag_matching.txt
rename to Documentation/infiniband/tag_matching.rst
index d2a3bf819226..ef56ea585f92 100644
--- a/Documentation/infiniband/tag_matching.txt
+++ b/Documentation/infiniband/tag_matching.rst
@@ -1,12 +1,16 @@
+==================
 Tag matching logic
+==================
 
 The MPI standard defines a set of rules, known as tag-matching, for matching
 source send operations to destination receives.  The following parameters must
 match the following source and destination parameters:
+
 *	Communicator
 *	User tag - wild card may be specified by the receiver
 *	Source rank – wild car may be specified by the receiver
 *	Destination rank – wild
+
 The ordering rules require that when more than one pair of send and receive
 message envelopes may match, the pair that includes the earliest posted-send
 and the earliest posted-receive is the pair that must be used to satisfy the
@@ -35,6 +39,7 @@ the header to initiate an RDMA READ operation directly to the matching buffer.
 A fin message needs to be received in order for the buffer to be reused.
 
 Tag matching implementation
+===========================
 
 There are two types of matching objects used, the posted receive list and the
 unexpected message list. The application posts receive buffers through calls
diff --git a/Documentation/infiniband/user_mad.txt b/Documentation/infiniband/user_mad.rst
similarity index 90%
rename from Documentation/infiniband/user_mad.txt
rename to Documentation/infiniband/user_mad.rst
index 7aca13a54a3a..d88abfc0e370 100644
--- a/Documentation/infiniband/user_mad.txt
+++ b/Documentation/infiniband/user_mad.rst
@@ -1,6 +1,9 @@
-USERSPACE MAD ACCESS
+====================
+Userspace MAD access
+====================
 
 Device files
+============
 
   Each port of each InfiniBand device has a "umad" device and an
   "issm" device attached.  For example, a two-port HCA will have two
@@ -8,12 +11,13 @@ Device files
   device of each type (for switch port 0).
 
 Creating MAD agents
+===================
 
   A MAD agent can be created by filling in a struct ib_user_mad_reg_req
   and then calling the IB_USER_MAD_REGISTER_AGENT ioctl on a file
   descriptor for the appropriate device file.  If the registration
   request succeeds, a 32-bit id will be returned in the structure.
-  For example:
+  For example::
 
 	struct ib_user_mad_reg_req req = { /* ... */ };
 	ret = ioctl(fd, IB_USER_MAD_REGISTER_AGENT, (char *) &req);
@@ -26,12 +30,14 @@ Creating MAD agents
   ioctl.  Also, all agents registered through a file descriptor will
   be unregistered when the descriptor is closed.
 
-  2014 -- a new registration ioctl is now provided which allows additional
+  2014
+       a new registration ioctl is now provided which allows additional
        fields to be provided during registration.
        Users of this registration call are implicitly setting the use of
        pkey_index (see below).
 
 Receiving MADs
+==============
 
   MADs are received using read().  The receive side now supports
   RMPP. The buffer passed to read() must be at least one
@@ -41,7 +47,8 @@ Receiving MADs
   MAD (RMPP), the errno is set to ENOSPC and the length of the
   buffer needed is set in mad.length.
 
-  Example for normal MAD (non RMPP) reads:
+  Example for normal MAD (non RMPP) reads::
+
 	struct ib_user_mad *mad;
 	mad = malloc(sizeof *mad + 256);
 	ret = read(fd, mad, sizeof *mad + 256);
@@ -50,7 +57,8 @@ Receiving MADs
 		free(mad);
 	}
 
-  Example for RMPP reads:
+  Example for RMPP reads::
+
 	struct ib_user_mad *mad;
 	mad = malloc(sizeof *mad + 256);
 	ret = read(fd, mad, sizeof *mad + 256);
@@ -76,11 +84,12 @@ Receiving MADs
   poll()/select() may be used to wait until a MAD can be read.
 
 Sending MADs
+============
 
   MADs are sent using write().  The agent ID for sending should be
   filled into the id field of the MAD, the destination LID should be
   filled into the lid field, and so on.  The send side does support
-  RMPP so arbitrary length MAD can be sent. For example:
+  RMPP so arbitrary length MAD can be sent. For example::
 
 	struct ib_user_mad *mad;
 
@@ -97,6 +106,7 @@ Sending MADs
 		perror("write");
 
 Transaction IDs
+===============
 
   Users of the umad devices can use the lower 32 bits of the
   transaction ID field (that is, the least significant half of the
@@ -105,6 +115,7 @@ Transaction IDs
   the kernel and will be overwritten before a MAD is sent.
 
 P_Key Index Handling
+====================
 
   The old ib_umad interface did not allow setting the P_Key index for
   MADs that are sent and did not provide a way for obtaining the P_Key
@@ -119,6 +130,7 @@ P_Key Index Handling
   default, and the IB_USER_MAD_ENABLE_PKEY ioctl will be removed.
 
 Setting IsSM Capability Bit
+===========================
 
   To set the IsSM capability bit for a port, simply open the
   corresponding issm device file.  If the IsSM bit is already set,
@@ -129,25 +141,26 @@ Setting IsSM Capability Bit
   the issm file.
 
 /dev files
+==========
 
   To create the appropriate character device files automatically with
-  udev, a rule like
+  udev, a rule like::
 
     KERNEL=="umad*", NAME="infiniband/%k"
     KERNEL=="issm*", NAME="infiniband/%k"
 
-  can be used.  This will create device nodes named
+  can be used.  This will create device nodes named::
 
     /dev/infiniband/umad0
     /dev/infiniband/issm0
 
   for the first port, and so on.  The InfiniBand device and port
-  associated with these devices can be determined from the files
+  associated with these devices can be determined from the files::
 
     /sys/class/infiniband_mad/umad0/ibdev
     /sys/class/infiniband_mad/umad0/port
 
-  and
+  and::
 
     /sys/class/infiniband_mad/issm0/ibdev
     /sys/class/infiniband_mad/issm0/port
diff --git a/Documentation/infiniband/user_verbs.txt b/Documentation/infiniband/user_verbs.rst
similarity index 93%
rename from Documentation/infiniband/user_verbs.txt
rename to Documentation/infiniband/user_verbs.rst
index 47ebf2f80b2b..8ddc4b1cfef2 100644
--- a/Documentation/infiniband/user_verbs.txt
+++ b/Documentation/infiniband/user_verbs.rst
@@ -1,4 +1,6 @@
-USERSPACE VERBS ACCESS
+======================
+Userspace verbs access
+======================
 
   The ib_uverbs module, built by enabling CONFIG_INFINIBAND_USER_VERBS,
   enables direct userspace access to IB hardware via "verbs," as
@@ -13,6 +15,7 @@ USERSPACE VERBS ACCESS
   libmthca userspace driver be installed.
 
 User-kernel communication
+=========================
 
   Userspace communicates with the kernel for slow path, resource
   management operations via the /dev/infiniband/uverbsN character
@@ -28,6 +31,7 @@ User-kernel communication
   system call.
 
 Resource management
+===================
 
   Since creation and destruction of all IB resources is done by
   commands passed through a file descriptor, the kernel can keep track
@@ -41,6 +45,7 @@ Resource management
   prevent one process from touching another process's resources.
 
 Memory pinning
+==============
 
   Direct userspace I/O requires that memory regions that are potential
   I/O targets be kept resident at the same physical address.  The
@@ -54,13 +59,14 @@ Memory pinning
   number of pages pinned by a process.
 
 /dev files
+==========
 
   To create the appropriate character device files automatically with
-  udev, a rule like
+  udev, a rule like::
 
     KERNEL=="uverbs*", NAME="infiniband/%k"
 
-  can be used.  This will create device nodes named
+  can be used.  This will create device nodes named::
 
     /dev/infiniband/uverbs0
 
diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index 56aa34206110..478018f74d35 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -744,7 +744,7 @@ static int ib_umad_reg_agent(struct ib_umad_file *file, void __user *arg,
 				"process %s did not enable P_Key index support.\n",
 				current->comm);
 			dev_warn(&file->port->dev,
-				"   Documentation/infiniband/user_mad.txt has info on the new ABI.\n");
+				"   Documentation/infiniband/user_mad.rst has info on the new ABI.\n");
 		}
 	}
 
diff --git a/drivers/infiniband/ulp/ipoib/Kconfig b/drivers/infiniband/ulp/ipoib/Kconfig
index cda8eac55fff..569d614d0c41 100644
--- a/drivers/infiniband/ulp/ipoib/Kconfig
+++ b/drivers/infiniband/ulp/ipoib/Kconfig
@@ -6,7 +6,7 @@ config INFINIBAND_IPOIB
 	  transports IP packets over InfiniBand so you can use your IB
 	  device as a fancy NIC.
 
-	  See Documentation/infiniband/ipoib.txt for more information
+	  See Documentation/infiniband/ipoib.rst for more information
 
 config INFINIBAND_IPOIB_CM
 	bool "IP-over-InfiniBand Connected Mode support"
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 19/79] docs: kdump: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (16 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 17/79] docs: infiniband: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 20/79] docs: livepatch: " Mauro Carvalho Chehab
                     ` (59 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Dave Young, Baoquan He, Vivek Goyal,
	Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
	Harry Wei, Alex Shi, Wim Van Sebroeck, Guenter Roeck,
	Russell King, Catalin Marinas, Will Deacon, Yoshinori Sato,
	Rich Felker, Thomas Gleixner, Ingo Molnar, Borislav Petkov,
	H. Peter Anvin, x86, kexec, linuxppc-dev, linux-watchdog,
	linux-arm-kernel, linux-sh

Convert kdump documentation to ReST and add it to the
user faced manual, as the documents are mainly focused on
sysadmins that would be enabling kdump.

Note: the vmcoreinfo.rst has one very long title on one of its
sub-sections:

	PG_lru|PG_private|PG_swapcache|PG_swapbacked|PG_slab|PG_hwpoision|PG_head_mask|PAGE_BUDDY_MAPCOUNT_VALUE(~PG_buddy)|PAGE_OFFLINE_MAPCOUNT_VALUE(~PG_offline)

I opted to break this one, into two entries with the same content,
in order to make it easier to display after being parsed in html and PDF.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/admin-guide/bug-hunting.rst     |   2 +-
 .../admin-guide/kernel-parameters.txt         |   6 +-
 Documentation/kdump/index.rst                 |  21 +++
 Documentation/kdump/{kdump.txt => kdump.rst}  | 131 +++++++++++-------
 .../kdump/{vmcoreinfo.txt => vmcoreinfo.rst}  |  59 ++++----
 .../powerpc/firmware-assisted-dump.txt        |   2 +-
 .../translations/zh_CN/oops-tracing.txt       |   2 +-
 Documentation/watchdog/hpwdt.txt              |   2 +-
 arch/arm/Kconfig                              |   2 +-
 arch/arm64/Kconfig                            |   2 +-
 arch/sh/Kconfig                               |   2 +-
 arch/x86/Kconfig                              |   4 +-
 12 files changed, 137 insertions(+), 98 deletions(-)
 create mode 100644 Documentation/kdump/index.rst
 rename Documentation/kdump/{kdump.txt => kdump.rst} (91%)
 rename Documentation/kdump/{vmcoreinfo.txt => vmcoreinfo.rst} (95%)

diff --git a/Documentation/admin-guide/bug-hunting.rst b/Documentation/admin-guide/bug-hunting.rst
index f278b289e260..b761aa2a51d2 100644
--- a/Documentation/admin-guide/bug-hunting.rst
+++ b/Documentation/admin-guide/bug-hunting.rst
@@ -90,7 +90,7 @@ the disk is not available then you have three options:
     run a null modem to a second machine and capture the output there
     using your favourite communication program.  Minicom works well.
 
-(3) Use Kdump (see Documentation/kdump/kdump.txt),
+(3) Use Kdump (see Documentation/kdump/kdump.rst),
     extract the kernel ring buffer from old memory with using dmesg
     gdbmacro in Documentation/kdump/gdbmacros.txt.
 
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index bfe926a7b15f..a4e8e6435fff 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -705,14 +705,14 @@
 			memory region [offset, offset + size] for that kernel
 			image. If '@offset' is omitted, then a suitable offset
 			is selected automatically. Check
-			Documentation/kdump/kdump.txt for further details.
+			Documentation/kdump/kdump.rst for further details.
 
 	crashkernel=range1:size1[,range2:size2,...][@offset]
 			[KNL] Same as above, but depends on the memory
 			in the running system. The syntax of range is
 			start-[end] where start and end are both
 			a memory unit (amount[KMG]). See also
-			Documentation/kdump/kdump.txt for an example.
+			Documentation/kdump/kdump.rst for an example.
 
 	crashkernel=size[KMG],high
 			[KNL, x86_64] range could be above 4G. Allow kernel
@@ -1206,7 +1206,7 @@
 			Specifies physical address of start of kernel core
 			image elf header and optionally the size. Generally
 			kexec loader will pass this option to capture kernel.
-			See Documentation/kdump/kdump.txt for details.
+			See Documentation/kdump/kdump.rst for details.
 
 	enable_mtrr_cleanup [X86]
 			The kernel tries to adjust MTRR layout from continuous
diff --git a/Documentation/kdump/index.rst b/Documentation/kdump/index.rst
new file mode 100644
index 000000000000..2b17fcf6867a
--- /dev/null
+++ b/Documentation/kdump/index.rst
@@ -0,0 +1,21 @@
+:orphan:
+
+================================================================
+Documentation for Kdump - The kexec-based Crash Dumping Solution
+================================================================
+
+This document includes overview, setup and installation, and analysis
+information.
+
+.. toctree::
+    :maxdepth: 1
+
+    kdump
+    vmcoreinfo
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.rst
similarity index 91%
rename from Documentation/kdump/kdump.txt
rename to Documentation/kdump/kdump.rst
index 51814450a7f8..1da2d7b765f6 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.rst
@@ -71,9 +71,8 @@ This is a symlink to the latest version.
 
 The latest kexec-tools git tree is available at:
 
-git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
-and
-http://www.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
+- git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
+- http://www.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
 
 There is also a gitweb interface available at
 http://www.kernel.org/git/?p=utils/kernel/kexec/kexec-tools.git
@@ -81,25 +80,25 @@ http://www.kernel.org/git/?p=utils/kernel/kexec/kexec-tools.git
 More information about kexec-tools can be found at
 http://horms.net/projects/kexec/
 
-3) Unpack the tarball with the tar command, as follows:
+3) Unpack the tarball with the tar command, as follows::
 
-   tar xvpzf kexec-tools.tar.gz
+	tar xvpzf kexec-tools.tar.gz
 
-4) Change to the kexec-tools directory, as follows:
+4) Change to the kexec-tools directory, as follows::
 
-   cd kexec-tools-VERSION
+	cd kexec-tools-VERSION
 
-5) Configure the package, as follows:
+5) Configure the package, as follows::
 
-   ./configure
+	./configure
 
-6) Compile the package, as follows:
+6) Compile the package, as follows::
 
-   make
+	make
 
-7) Install the package, as follows:
+7) Install the package, as follows::
 
-   make install
+	make install
 
 
 Build the system and dump-capture kernels
@@ -126,25 +125,25 @@ dump-capture kernels for enabling kdump support.
 System kernel config options
 ----------------------------
 
-1) Enable "kexec system call" in "Processor type and features."
+1) Enable "kexec system call" in "Processor type and features."::
 
-   CONFIG_KEXEC=y
+	CONFIG_KEXEC=y
 
 2) Enable "sysfs file system support" in "Filesystem" -> "Pseudo
-   filesystems." This is usually enabled by default.
+   filesystems." This is usually enabled by default::
 
-   CONFIG_SYSFS=y
+	CONFIG_SYSFS=y
 
    Note that "sysfs file system support" might not appear in the "Pseudo
    filesystems" menu if "Configure standard kernel features (for small
    systems)" is not enabled in "General Setup." In this case, check the
-   .config file itself to ensure that sysfs is turned on, as follows:
+   .config file itself to ensure that sysfs is turned on, as follows::
 
-   grep 'CONFIG_SYSFS' .config
+	grep 'CONFIG_SYSFS' .config
 
-3) Enable "Compile the kernel with debug info" in "Kernel hacking."
+3) Enable "Compile the kernel with debug info" in "Kernel hacking."::
 
-   CONFIG_DEBUG_INFO=Y
+	CONFIG_DEBUG_INFO=Y
 
    This causes the kernel to be built with debug symbols. The dump
    analysis tools require a vmlinux with debug symbols in order to read
@@ -154,29 +153,32 @@ Dump-capture kernel config options (Arch Independent)
 -----------------------------------------------------
 
 1) Enable "kernel crash dumps" support under "Processor type and
-   features":
+   features"::
 
-   CONFIG_CRASH_DUMP=y
+	CONFIG_CRASH_DUMP=y
 
-2) Enable "/proc/vmcore support" under "Filesystems" -> "Pseudo filesystems".
+2) Enable "/proc/vmcore support" under "Filesystems" -> "Pseudo filesystems"::
+
+	CONFIG_PROC_VMCORE=y
 
-   CONFIG_PROC_VMCORE=y
    (CONFIG_PROC_VMCORE is set by default when CONFIG_CRASH_DUMP is selected.)
 
 Dump-capture kernel config options (Arch Dependent, i386 and x86_64)
 --------------------------------------------------------------------
 
 1) On i386, enable high memory support under "Processor type and
-   features":
+   features"::
 
-   CONFIG_HIGHMEM64G=y
-   or
-   CONFIG_HIGHMEM4G
+	CONFIG_HIGHMEM64G=y
+
+   or::
+
+	CONFIG_HIGHMEM4G
 
 2) On i386 and x86_64, disable symmetric multi-processing support
-   under "Processor type and features":
+   under "Processor type and features"::
 
-   CONFIG_SMP=n
+	CONFIG_SMP=n
 
    (If CONFIG_SMP=y, then specify maxcpus=1 on the kernel command line
    when loading the dump-capture kernel, see section "Load the Dump-capture
@@ -184,9 +186,9 @@ Dump-capture kernel config options (Arch Dependent, i386 and x86_64)
 
 3) If one wants to build and use a relocatable kernel,
    Enable "Build a relocatable kernel" support under "Processor type and
-   features"
+   features"::
 
-   CONFIG_RELOCATABLE=y
+	CONFIG_RELOCATABLE=y
 
 4) Use a suitable value for "Physical address where the kernel is
    loaded" (under "Processor type and features"). This only appears when
@@ -211,13 +213,13 @@ Dump-capture kernel config options (Arch Dependent, i386 and x86_64)
 Dump-capture kernel config options (Arch Dependent, ppc64)
 ----------------------------------------------------------
 
-1) Enable "Build a kdump crash kernel" support under "Kernel" options:
+1) Enable "Build a kdump crash kernel" support under "Kernel" options::
 
-   CONFIG_CRASH_DUMP=y
+	CONFIG_CRASH_DUMP=y
 
-2)   Enable "Build a relocatable kernel" support
+2)   Enable "Build a relocatable kernel" support::
 
-   CONFIG_RELOCATABLE=y
+	CONFIG_RELOCATABLE=y
 
    Make and install the kernel and its modules.
 
@@ -231,11 +233,13 @@ Dump-capture kernel config options (Arch Dependent, ia64)
 
   The crashkernel region can be automatically placed by the system
   kernel at run time. This is done by specifying the base address as 0,
-  or omitting it all together.
+  or omitting it all together::
 
-  crashkernel=256M@0
-  or
-  crashkernel=256M
+	crashkernel=256M@0
+
+  or::
+
+	crashkernel=256M
 
   If the start address is specified, note that the start address of the
   kernel will be aligned to 64Mb, so if the start address is not then
@@ -245,9 +249,9 @@ Dump-capture kernel config options (Arch Dependent, arm)
 ----------------------------------------------------------
 
 -   To use a relocatable kernel,
-    Enable "AUTO_ZRELADDR" support under "Boot" options:
+    Enable "AUTO_ZRELADDR" support under "Boot" options::
 
-    AUTO_ZRELADDR=y
+	AUTO_ZRELADDR=y
 
 Dump-capture kernel config options (Arch Dependent, arm64)
 ----------------------------------------------------------
@@ -265,12 +269,12 @@ on the value of System RAM -- that's mostly for distributors that pre-setup
 the kernel command line to avoid a unbootable system after some memory has
 been removed from the machine.
 
-The syntax is:
+The syntax is::
 
     crashkernel=<range1>:<size1>[,<range2>:<size2>,...][@offset]
     range=start-[end]
 
-For example:
+For example::
 
     crashkernel=512M-2G:64M,2G-:128M
 
@@ -326,35 +330,46 @@ can choose to load the uncompressed vmlinux or compressed bzImage/vmlinuz
 of dump-capture kernel. Following is the summary.
 
 For i386 and x86_64:
+
 	- Use vmlinux if kernel is not relocatable.
 	- Use bzImage/vmlinuz if kernel is relocatable.
+
 For ppc64:
+
 	- Use vmlinux
+
 For ia64:
+
 	- Use vmlinux or vmlinuz.gz
+
 For s390x:
+
 	- Use image or bzImage
+
 For arm:
+
 	- Use zImage
+
 For arm64:
+
 	- Use vmlinux or Image
 
 If you are using an uncompressed vmlinux image then use following command
-to load dump-capture kernel.
+to load dump-capture kernel::
 
    kexec -p <dump-capture-kernel-vmlinux-image> \
    --initrd=<initrd-for-dump-capture-kernel> --args-linux \
    --append="root=<root-dev> <arch-specific-options>"
 
 If you are using a compressed bzImage/vmlinuz, then use following command
-to load dump-capture kernel.
+to load dump-capture kernel::
 
    kexec -p <dump-capture-kernel-bzImage> \
    --initrd=<initrd-for-dump-capture-kernel> \
    --append="root=<root-dev> <arch-specific-options>"
 
 If you are using a compressed zImage, then use following command
-to load dump-capture kernel.
+to load dump-capture kernel::
 
    kexec --type zImage -p <dump-capture-kernel-bzImage> \
    --initrd=<initrd-for-dump-capture-kernel> \
@@ -362,7 +377,7 @@ to load dump-capture kernel.
    --append="root=<root-dev> <arch-specific-options>"
 
 If you are using an uncompressed Image, then use following command
-to load dump-capture kernel.
+to load dump-capture kernel::
 
    kexec -p <dump-capture-kernel-Image> \
    --initrd=<initrd-for-dump-capture-kernel> \
@@ -376,18 +391,23 @@ Following are the arch specific command line options to be used while
 loading dump-capture kernel.
 
 For i386, x86_64 and ia64:
+
 	"1 irqpoll maxcpus=1 reset_devices"
 
 For ppc64:
+
 	"1 maxcpus=1 noirqdistrib reset_devices"
 
 For s390x:
+
 	"1 maxcpus=1 cgroup_disable=memory"
 
 For arm:
+
 	"1 maxcpus=1 reset_devices"
 
 For arm64:
+
 	"1 maxcpus=1 reset_devices"
 
 Notes on loading the dump-capture kernel:
@@ -464,7 +484,7 @@ Write Out the Dump File
 =======================
 
 After the dump-capture kernel is booted, write out the dump file with
-the following command:
+the following command::
 
    cp /proc/vmcore <dump-file>
 
@@ -476,7 +496,7 @@ Before analyzing the dump image, you should reboot into a stable kernel.
 
 You can do limited analysis using GDB on the dump file copied out of
 /proc/vmcore. Use the debug vmlinux built with -g and run the following
-command:
+command::
 
    gdb vmlinux <dump-file>
 
@@ -504,6 +524,11 @@ to achieve the same behaviour.
 Contact
 =======
 
-Vivek Goyal (vgoyal@redhat.com)
-Maneesh Soni (maneesh@in.ibm.com)
+- Vivek Goyal (vgoyal@redhat.com)
+- Maneesh Soni (maneesh@in.ibm.com)
 
+GDB macros
+==========
+
+.. include:: gdbmacros.txt
+   :literal:
diff --git a/Documentation/kdump/vmcoreinfo.txt b/Documentation/kdump/vmcoreinfo.rst
similarity index 95%
rename from Documentation/kdump/vmcoreinfo.txt
rename to Documentation/kdump/vmcoreinfo.rst
index bb94a4bd597a..007a6b86e0ee 100644
--- a/Documentation/kdump/vmcoreinfo.txt
+++ b/Documentation/kdump/vmcoreinfo.rst
@@ -1,8 +1,7 @@
-================================================================
-			VMCOREINFO
-================================================================
+==========
+VMCOREINFO
+==========
 
-===========
 What is it?
 ===========
 
@@ -12,7 +11,6 @@ values, field offsets, etc. These data are packed into an ELF note
 section and used by user-space tools like crash and makedumpfile to
 analyze a kernel's memory layout.
 
-================
 Common variables
 ================
 
@@ -49,7 +47,7 @@ in a system, one bit position per node number. Used to keep track of
 which nodes are in the system and online.
 
 swapper_pg_dir
--------------
+--------------
 
 The global page directory pointer of the kernel. Used to translate
 virtual to physical addresses.
@@ -132,16 +130,14 @@ nodemask_t
 The size of a nodemask_t type. Used to compute the number of online
 nodes.
 
-(page, flags|_refcount|mapping|lru|_mapcount|private|compound_dtor|
-       compound_order|compound_head)
--------------------------------------------------------------------
+(page, flags|_refcount|mapping|lru|_mapcount|private|compound_dtor|compound_order|compound_head)
+-------------------------------------------------------------------------------------------------
 
 User-space tools compute their values based on the offset of these
 variables. The variables are used when excluding unnecessary pages.
 
-(pglist_data, node_zones|nr_zones|node_mem_map|node_start_pfn|node_
-              spanned_pages|node_id)
--------------------------------------------------------------------
+(pglist_data, node_zones|nr_zones|node_mem_map|node_start_pfn|node_spanned_pages|node_id)
+-----------------------------------------------------------------------------------------
 
 On NUMA machines, each NUMA node has a pg_data_t to describe its memory
 layout. On UMA machines there is a single pglist_data which describes the
@@ -245,21 +241,25 @@ NR_FREE_PAGES
 On linux-2.6.21 or later, the number of free pages is in
 vm_stat[NR_FREE_PAGES]. Used to get the number of free pages.
 
-PG_lru|PG_private|PG_swapcache|PG_swapbacked|PG_slab|PG_hwpoision
-|PG_head_mask|PAGE_BUDDY_MAPCOUNT_VALUE(~PG_buddy)
-|PAGE_OFFLINE_MAPCOUNT_VALUE(~PG_offline)
------------------------------------------------------------------
+PG_lru|PG_private|PG_swapcache|PG_swapbacked|PG_slab|PG_hwpoision|PG_head_mask
+------------------------------------------------------------------------------
 
 Page attributes. These flags are used to filter various unnecessary for
 dumping pages.
 
+PAGE_BUDDY_MAPCOUNT_VALUE(~PG_buddy)|PAGE_OFFLINE_MAPCOUNT_VALUE(~PG_offline)
+-----------------------------------------------------------------------------
+
+More page attributes. These flags are used to filter various unnecessary for
+dumping pages.
+
+
 HUGETLB_PAGE_DTOR
 -----------------
 
 The HUGETLB_PAGE_DTOR flag denotes hugetlbfs pages. Makedumpfile
 excludes these pages.
 
-======
 x86_64
 ======
 
@@ -318,12 +318,12 @@ address.
 Currently, sme_mask stores the value of the C-bit position. If needed,
 additional SME-relevant info can be placed in that variable.
 
-For example:
-[ misc	        ][ enc bit  ][ other misc SME info       ]
-0000_0000_0000_0000_1000_0000_0000_0000_0000_0000_..._0000
-63   59   55   51   47   43   39   35   31   27   ... 3
+For example::
+
+  [ misc	        ][ enc bit  ][ other misc SME info       ]
+  0000_0000_0000_0000_1000_0000_0000_0000_0000_0000_..._0000
+  63   59   55   51   47   43   39   35   31   27   ... 3
 
-======
 x86_32
 ======
 
@@ -335,7 +335,6 @@ of a higher page table lookup overhead, and also consumes more page
 table space per process. Used to check whether PAE was enabled in the
 crash kernel when converting virtual addresses to physical addresses.
 
-====
 ia64
 ====
 
@@ -366,7 +365,6 @@ PGTABLE_3|PGTABLE_4
 User-space tools need to know whether the crash kernel was in 3-level or
 4-level paging mode. Used to distinguish the page table.
 
-=====
 ARM64
 =====
 
@@ -395,9 +393,8 @@ KERNELOFFSET
 The kernel randomization offset. Used to compute the page offset. If
 KASLR is disabled, this value is zero.
 
-====
 arm
-====
+===
 
 ARM_LPAE
 --------
@@ -405,12 +402,11 @@ ARM_LPAE
 It indicates whether the crash kernel supports large physical address
 extensions. Used to translate virtual to physical addresses.
 
-====
 s390
 ====
 
 lowcore_ptr
-----------
+-----------
 
 An array with a pointer to the lowcore of every CPU. Used to print the
 psw and all registers information.
@@ -425,7 +421,6 @@ Used to get the vmalloc_start address from the high_memory symbol.
 
 The maximum number of CPUs.
 
-=======
 powerpc
 =======
 
@@ -460,9 +455,8 @@ Page size definitions, i.e. 4k, 64k, or 16M.
 
 Used to make vtop translations.
 
-vmemmap_backing|(vmemmap_backing, list)|(vmemmap_backing, phys)|
-(vmemmap_backing, virt_addr)
-----------------------------------------------------------------
+vmemmap_backing|(vmemmap_backing, list)|(vmemmap_backing, phys)|(vmemmap_backing, virt_addr)
+--------------------------------------------------------------------------------------------
 
 The vmemmap virtual address space management does not have a traditional
 page table to track which virtual struct pages are backed by a physical
@@ -480,7 +474,6 @@ member.
 
 Used in vtop translations.
 
-==
 sh
 ==
 
diff --git a/Documentation/powerpc/firmware-assisted-dump.txt b/Documentation/powerpc/firmware-assisted-dump.txt
index 18c5feef2577..0c41d6d463f3 100644
--- a/Documentation/powerpc/firmware-assisted-dump.txt
+++ b/Documentation/powerpc/firmware-assisted-dump.txt
@@ -59,7 +59,7 @@ as follows:
          the default calculated size. Use this option if default
          boot memory size is not sufficient for second kernel to
          boot successfully. For syntax of crashkernel= parameter,
-         refer to Documentation/kdump/kdump.txt. If any offset is
+         refer to Documentation/kdump/kdump.rst. If any offset is
          provided in crashkernel= parameter, it will be ignored
          as fadump uses a predefined offset to reserve memory
          for boot memory dump preservation in case of a crash.
diff --git a/Documentation/translations/zh_CN/oops-tracing.txt b/Documentation/translations/zh_CN/oops-tracing.txt
index 93fa061cf9e4..368ddd05b304 100644
--- a/Documentation/translations/zh_CN/oops-tracing.txt
+++ b/Documentation/translations/zh_CN/oops-tracing.txt
@@ -53,7 +53,7 @@ cat /proc/kmsg > file, 然而你必须介入中止传输, kmsg是一个“
 (2)用串口终端启动(请参看Documentation/admin-guide/serial-console.rst),运行一个null
 modem到另一台机器并用你喜欢的通讯工具获取输出。Minicom工作地很好。
 
-(3)使用Kdump(请参看Documentation/kdump/kdump.txt),
+(3)使用Kdump(请参看Documentation/kdump/kdump.rst),
 使用在Documentation/kdump/gdbmacros.txt中定义的dmesg gdb宏,从旧的内存中提取内核
 环形缓冲区。
 
diff --git a/Documentation/watchdog/hpwdt.txt b/Documentation/watchdog/hpwdt.txt
index 55df692c5595..aaa9e4b4bdcd 100644
--- a/Documentation/watchdog/hpwdt.txt
+++ b/Documentation/watchdog/hpwdt.txt
@@ -51,7 +51,7 @@ Last reviewed: 08/20/2018
  and loop forever.  This is generally not what a watchdog user wants.
 
  For those wishing to learn more please see:
-	Documentation/kdump/kdump.txt
+	Documentation/kdump/kdump.rst
 	Documentation/admin-guide/kernel-parameters.txt (panic=)
 	Your Linux Distribution specific documentation.
 
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b509cd338219..c81ee94e8256 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2007,7 +2007,7 @@ config CRASH_DUMP
 	  kdump/kexec. The crash dump kernel must be compiled to a
 	  memory address not used by the main kernel
 
-	  For more details see Documentation/kdump/kdump.txt
+	  For more details see Documentation/kdump/kdump.rst
 
 config AUTO_ZRELADDR
 	bool "Auto calculation of the decompressed kernel image address"
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 8e33203e3583..e67ad4dad1cf 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -974,7 +974,7 @@ config CRASH_DUMP
 	  reserved region and then later executed after a crash by
 	  kdump/kexec.
 
-	  For more details see Documentation/kdump/kdump.txt
+	  For more details see Documentation/kdump/kdump.rst
 
 config XEN_DOM0
 	def_bool y
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 2a77033e1e7c..9883516e682c 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -624,7 +624,7 @@ config CRASH_DUMP
 	  to a memory address not used by the main kernel using
 	  PHYSICAL_START.
 
-	  For more details see Documentation/kdump/kdump.txt
+	  For more details see Documentation/kdump/kdump.rst
 
 config KEXEC_JUMP
 	bool "kexec jump (EXPERIMENTAL)"
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 17f01a0800b3..bd8dea466b04 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2038,7 +2038,7 @@ config CRASH_DUMP
 	  to a memory address not used by the main kernel or BIOS using
 	  PHYSICAL_START, or it must be built as a relocatable image
 	  (CONFIG_RELOCATABLE=y).
-	  For more details see Documentation/kdump/kdump.txt
+	  For more details see Documentation/kdump/kdump.rst
 
 config KEXEC_JUMP
 	bool "kexec jump"
@@ -2075,7 +2075,7 @@ config PHYSICAL_START
 	  the reserved region.  In other words, it can be set based on
 	  the "X" value as specified in the "crashkernel=YM@XM"
 	  command line boot parameter passed to the panic-ed
-	  kernel. Please take a look at Documentation/kdump/kdump.txt
+	  kernel. Please take a look at Documentation/kdump/kdump.rst
 	  for more details about crash dumps.
 
 	  Usage of bzImage for capturing the crash dump is recommended as
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 20/79] docs: livepatch: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (17 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 19/79] docs: kdump: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-26  8:10     ` Petr Mladek
  2019-04-22 13:27   ` [PATCH v2 21/79] docs: locking: " Mauro Carvalho Chehab
                     ` (58 subsequent siblings)
  77 siblings, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Josh Poimboeuf, Jiri Kosina, Miroslav Benes,
	Petr Mladek, Joe Lawrence, Peter Zijlstra, live-patching

Convert livepatch documentation to ReST format. The changes
are mostly trivial, as the documents are already on a good
shape. Just a few markup changes are needed for Sphinx to
properly parse the docs.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - The in-file TOC becomes a comment, in order to skip it from the
    output, as Sphinx already generates an index there.
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../ABI/testing/sysfs-kernel-livepatch        |   2 +-
 .../{callbacks.txt => callbacks.rst}          |  12 +-
 ...ive-patches.txt => cumulative-patches.rst} |  14 +-
 Documentation/livepatch/index.rst             |  21 ++
 .../{livepatch.txt => livepatch.rst}          |  60 ++---
 ...e-elf-format.txt => module-elf-format.rst} | 211 ++++++++++--------
 .../{shadow-vars.txt => shadow-vars.rst}      |  65 ++++--
 .../Documentation/stack-validation.txt        |   2 +-
 8 files changed, 224 insertions(+), 163 deletions(-)
 rename Documentation/livepatch/{callbacks.txt => callbacks.rst} (94%)
 rename Documentation/livepatch/{cumulative-patches.txt => cumulative-patches.rst} (89%)
 create mode 100644 Documentation/livepatch/index.rst
 rename Documentation/livepatch/{livepatch.txt => livepatch.rst} (93%)
 rename Documentation/livepatch/{module-elf-format.txt => module-elf-format.rst} (68%)
 rename Documentation/livepatch/{shadow-vars.txt => shadow-vars.rst} (87%)

diff --git a/Documentation/ABI/testing/sysfs-kernel-livepatch b/Documentation/ABI/testing/sysfs-kernel-livepatch
index 85db352f68f9..bea7bd5a1d5f 100644
--- a/Documentation/ABI/testing/sysfs-kernel-livepatch
+++ b/Documentation/ABI/testing/sysfs-kernel-livepatch
@@ -45,7 +45,7 @@ Description:
 		use this feature without a clearance from a patch
 		distributor. Removal (rmmod) of patch modules is permanently
 		disabled when the feature is used. See
-		Documentation/livepatch/livepatch.txt for more information.
+		Documentation/livepatch/livepatch.rst for more information.
 
 What:		/sys/kernel/livepatch/<patch>/<object>
 Date:		Nov 2014
diff --git a/Documentation/livepatch/callbacks.txt b/Documentation/livepatch/callbacks.rst
similarity index 94%
rename from Documentation/livepatch/callbacks.txt
rename to Documentation/livepatch/callbacks.rst
index 182e31d4abce..d76d1f0d9fcf 100644
--- a/Documentation/livepatch/callbacks.txt
+++ b/Documentation/livepatch/callbacks.rst
@@ -30,16 +30,20 @@ be patched, irrespective of the target klp_object's current state.
 
 Callbacks can be registered for the following livepatch actions:
 
-  * Pre-patch    - before a klp_object is patched
+  * Pre-patch
+                 - before a klp_object is patched
 
-  * Post-patch   - after a klp_object has been patched and is active
+  * Post-patch
+                 - after a klp_object has been patched and is active
                    across all tasks
 
-  * Pre-unpatch  - before a klp_object is unpatched (ie, patched code is
+  * Pre-unpatch
+                 - before a klp_object is unpatched (ie, patched code is
                    active), used to clean up post-patch callback
                    resources
 
-  * Post-unpatch - after a klp_object has been patched, all code has
+  * Post-unpatch
+                 - after a klp_object has been patched, all code has
                    been restored and no tasks are running patched code,
                    used to cleanup pre-patch callback resources
 
diff --git a/Documentation/livepatch/cumulative-patches.txt b/Documentation/livepatch/cumulative-patches.rst
similarity index 89%
rename from Documentation/livepatch/cumulative-patches.txt
rename to Documentation/livepatch/cumulative-patches.rst
index 0012808e8d44..1931f318976a 100644
--- a/Documentation/livepatch/cumulative-patches.txt
+++ b/Documentation/livepatch/cumulative-patches.rst
@@ -18,7 +18,7 @@ Usage
 -----
 
 The atomic replace can be enabled by setting "replace" flag in struct klp_patch,
-for example:
+for example::
 
 	static struct klp_patch patch = {
 		.mod = THIS_MODULE,
@@ -49,19 +49,19 @@ Features
 
 The atomic replace allows:
 
-  + Atomically revert some functions in a previous patch while
+  - Atomically revert some functions in a previous patch while
     upgrading other functions.
 
-  + Remove eventual performance impact caused by core redirection
+  - Remove eventual performance impact caused by core redirection
     for functions that are no longer patched.
 
-  + Decrease user confusion about dependencies between livepatches.
+  - Decrease user confusion about dependencies between livepatches.
 
 
 Limitations:
 ------------
 
-  + Once the operation finishes, there is no straightforward way
+  - Once the operation finishes, there is no straightforward way
     to reverse it and restore the replaced patches atomically.
 
     A good practice is to set .replace flag in any released livepatch.
@@ -74,7 +74,7 @@ Limitations:
     only when the transition was not forced.
 
 
-  + Only the (un)patching callbacks from the _new_ cumulative livepatch are
+  - Only the (un)patching callbacks from the _new_ cumulative livepatch are
     executed. Any callbacks from the replaced patches are ignored.
 
     In other words, the cumulative patch is responsible for doing any actions
@@ -93,7 +93,7 @@ Limitations:
     enabled patches were called.
 
 
-  + There is no special handling of shadow variables. Livepatch authors
+  - There is no special handling of shadow variables. Livepatch authors
     must create their own rules how to pass them from one cumulative
     patch to the other. Especially that they should not blindly remove
     them in module_exit() functions.
diff --git a/Documentation/livepatch/index.rst b/Documentation/livepatch/index.rst
new file mode 100644
index 000000000000..edd291d51847
--- /dev/null
+++ b/Documentation/livepatch/index.rst
@@ -0,0 +1,21 @@
+:orphan:
+
+===================
+Kernel Livepatching
+===================
+
+.. toctree::
+    :maxdepth: 1
+
+    livepatch
+    callbacks
+    cumulative-patches
+    module-elf-format
+    shadow-vars
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/livepatch/livepatch.txt b/Documentation/livepatch/livepatch.rst
similarity index 93%
rename from Documentation/livepatch/livepatch.txt
rename to Documentation/livepatch/livepatch.rst
index 4627b41ff02e..c2c598c4ead8 100644
--- a/Documentation/livepatch/livepatch.txt
+++ b/Documentation/livepatch/livepatch.rst
@@ -4,22 +4,22 @@ Livepatch
 
 This document outlines basic information about kernel livepatching.
 
-Table of Contents:
+.. Table of Contents:
 
-1. Motivation
-2. Kprobes, Ftrace, Livepatching
-3. Consistency model
-4. Livepatch module
-   4.1. New functions
-   4.2. Metadata
-5. Livepatch life-cycle
-   5.1. Loading
-   5.2. Enabling
-   5.3. Replacing
-   5.4. Disabling
-   5.5. Removing
-6. Sysfs
-7. Limitations
+    1. Motivation
+    2. Kprobes, Ftrace, Livepatching
+    3. Consistency model
+    4. Livepatch module
+       4.1. New functions
+       4.2. Metadata
+    5. Livepatch life-cycle
+       5.1. Loading
+       5.2. Enabling
+       5.3. Replacing
+       5.4. Disabling
+       5.5. Removing
+    6. Sysfs
+    7. Limitations
 
 
 1. Motivation
@@ -40,14 +40,14 @@ There are multiple mechanisms in the Linux kernel that are directly related
 to redirection of code execution; namely: kernel probes, function tracing,
 and livepatching:
 
-  + The kernel probes are the most generic. The code can be redirected by
+  - The kernel probes are the most generic. The code can be redirected by
     putting a breakpoint instruction instead of any instruction.
 
-  + The function tracer calls the code from a predefined location that is
+  - The function tracer calls the code from a predefined location that is
     close to the function entry point. This location is generated by the
     compiler using the '-pg' gcc option.
 
-  + Livepatching typically needs to redirect the code at the very beginning
+  - Livepatching typically needs to redirect the code at the very beginning
     of the function entry before the function parameters or the stack
     are in any way modified.
 
@@ -249,7 +249,7 @@ The patch contains only functions that are really modified. But they
 might want to access functions or data from the original source file
 that may only be locally accessible. This can be solved by a special
 relocation section in the generated livepatch module, see
-Documentation/livepatch/module-elf-format.txt for more details.
+Documentation/livepatch/module-elf-format.rst for more details.
 
 
 4.2. Metadata
@@ -258,7 +258,7 @@ Documentation/livepatch/module-elf-format.txt for more details.
 The patch is described by several structures that split the information
 into three levels:
 
-  + struct klp_func is defined for each patched function. It describes
+  - struct klp_func is defined for each patched function. It describes
     the relation between the original and the new implementation of a
     particular function.
 
@@ -275,7 +275,7 @@ into three levels:
     only for a particular object ( vmlinux or a kernel module ). Note that
     kallsyms allows for searching symbols according to the object name.
 
-  + struct klp_object defines an array of patched functions (struct
+  - struct klp_object defines an array of patched functions (struct
     klp_func) in the same object. Where the object is either vmlinux
     (NULL) or a module name.
 
@@ -285,7 +285,7 @@ into three levels:
     only when they are available.
 
 
-  + struct klp_patch defines an array of patched objects (struct
+  - struct klp_patch defines an array of patched objects (struct
     klp_object).
 
     This structure handles all patched functions consistently and eventually,
@@ -337,14 +337,16 @@ operation fails.
 Second, livepatch enters into a transition state where tasks are converging
 to the patched state. If an original function is patched for the first
 time, a function specific struct klp_ops is created and an universal
-ftrace handler is registered[*]. This stage is indicated by a value of '1'
+ftrace handler is registered\ [#]_. This stage is indicated by a value of '1'
 in /sys/kernel/livepatch/<name>/transition. For more information about
 this process, see the "Consistency model" section.
 
 Finally, once all tasks have been patched, the 'transition' value changes
 to '0'.
 
-[*] Note that functions might be patched multiple times. The ftrace handler
+.. [#]
+
+    Note that functions might be patched multiple times. The ftrace handler
     is registered only once for a given function. Further patches just add
     an entry to the list (see field `func_stack`) of the struct klp_ops.
     The right implementation is selected by the ftrace handler, see
@@ -368,7 +370,7 @@ the ftrace handler is unregistered and the struct klp_ops is
 freed when the related function is not modified by the new patch
 and func_stack list becomes empty.
 
-See Documentation/livepatch/cumulative-patches.txt for more details.
+See Documentation/livepatch/cumulative-patches.rst for more details.
 
 
 5.4. Disabling
@@ -421,7 +423,7 @@ See Documentation/ABI/testing/sysfs-kernel-livepatch for more details.
 
 The current Livepatch implementation has several limitations:
 
-  + Only functions that can be traced could be patched.
+  - Only functions that can be traced could be patched.
 
     Livepatch is based on the dynamic ftrace. In particular, functions
     implementing ftrace or the livepatch ftrace handler could not be
@@ -431,7 +433,7 @@ The current Livepatch implementation has several limitations:
 
 
 
-  + Livepatch works reliably only when the dynamic ftrace is located at
+  - Livepatch works reliably only when the dynamic ftrace is located at
     the very beginning of the function.
 
     The function need to be redirected before the stack or the function
@@ -445,7 +447,7 @@ The current Livepatch implementation has several limitations:
     this is handled on the ftrace level.
 
 
-  + Kretprobes using the ftrace framework conflict with the patched
+  - Kretprobes using the ftrace framework conflict with the patched
     functions.
 
     Both kretprobes and livepatches use a ftrace handler that modifies
@@ -453,7 +455,7 @@ The current Livepatch implementation has several limitations:
     is rejected when the handler is already in use by the other.
 
 
-  + Kprobes in the original function are ignored when the code is
+  - Kprobes in the original function are ignored when the code is
     redirected to the new implementation.
 
     There is a work in progress to add warnings about this situation.
diff --git a/Documentation/livepatch/module-elf-format.txt b/Documentation/livepatch/module-elf-format.rst
similarity index 68%
rename from Documentation/livepatch/module-elf-format.txt
rename to Documentation/livepatch/module-elf-format.rst
index f21a5289a09c..7f557c6f6deb 100644
--- a/Documentation/livepatch/module-elf-format.txt
+++ b/Documentation/livepatch/module-elf-format.rst
@@ -4,29 +4,29 @@ Livepatch module Elf format
 
 This document outlines the Elf format requirements that livepatch modules must follow.
 
------------------
-Table of Contents
------------------
-0. Background and motivation
-1. Livepatch modinfo field
-2. Livepatch relocation sections
-   2.1 What are livepatch relocation sections?
-   2.2 Livepatch relocation section format
-       2.2.1 Required flags
-       2.2.2 Required name format
-       2.2.3 Example livepatch relocation section names
-       2.2.4 Example `readelf --sections` output
-       2.2.5 Example `readelf --relocs` output
-3. Livepatch symbols
-   3.1 What are livepatch symbols?
-   3.2 A livepatch module's symbol table
-   3.3 Livepatch symbol format
-       3.3.1 Required flags
-       3.3.2 Required name format
-       3.3.3 Example livepatch symbol names
-       3.3.4 Example `readelf --symbols` output
-4. Architecture-specific sections
-5. Symbol table and Elf section access
+
+.. Table of Contents
+
+   0. Background and motivation
+   1. Livepatch modinfo field
+   2. Livepatch relocation sections
+      2.1 What are livepatch relocation sections?
+      2.2 Livepatch relocation section format
+          2.2.1 Required flags
+          2.2.2 Required name format
+          2.2.3 Example livepatch relocation section names
+          2.2.4 Example `readelf --sections` output
+          2.2.5 Example `readelf --relocs` output
+   3. Livepatch symbols
+      3.1 What are livepatch symbols?
+      3.2 A livepatch module's symbol table
+      3.3 Livepatch symbol format
+          3.3.1 Required flags
+          3.3.2 Required name format
+          3.3.3 Example livepatch symbol names
+          3.3.4 Example `readelf --symbols` output
+   4. Architecture-specific sections
+   5. Symbol table and Elf section access
 
 ----------------------------
 0. Background and motivation
@@ -89,12 +89,15 @@ used by the kernel module loader to identify livepatch modules.
 
 Example modinfo output:
 -----------------------
-% modinfo livepatch-meminfo.ko
-filename:		livepatch-meminfo.ko
-livepatch:		Y
-license:		GPL
-depends:
-vermagic:		4.3.0+ SMP mod_unload
+
+::
+
+	% modinfo livepatch-meminfo.ko
+	filename:		livepatch-meminfo.ko
+	livepatch:		Y
+	license:		GPL
+	depends:
+	vermagic:		4.3.0+ SMP mod_unload
 
 --------------------------------
 2. Livepatch relocation sections
@@ -142,17 +145,18 @@ be copied into memory along with the other SHF_ALLOC sections).
 
 2.2.2 Required name format
 --------------------------
-The name of a livepatch relocation section must conform to the following format:
+The name of a livepatch relocation section must conform to the following
+format::
 
-.klp.rela.objname.section_name
-^        ^^     ^ ^          ^
-|________||_____| |__________|
-   [A]      [B]        [C]
+  .klp.rela.objname.section_name
+  ^        ^^     ^ ^          ^
+  |________||_____| |__________|
+     [A]      [B]        [C]
 
-[A] The relocation section name is prefixed with the string ".klp.rela."
-[B] The name of the object (i.e. "vmlinux" or name of module) to
-    which the relocation section belongs follows immediately after the prefix.
-[C] The actual name of the section to which this relocation section applies.
+  [A] The relocation section name is prefixed with the string ".klp.rela."
+  [B] The name of the object (i.e. "vmlinux" or name of module) to
+      which the relocation section belongs follows immediately after the prefix.
+  [C] The actual name of the section to which this relocation section applies.
 
 2.2.3 Example livepatch relocation section names:
 -------------------------------------------------
@@ -162,6 +166,9 @@ The name of a livepatch relocation section must conform to the following format:
 2.2.4 Example `readelf --sections` output for a patch
 module that patches vmlinux and modules 9p, btrfs, ext4:
 --------------------------------------------------------
+
+::
+
   Section Headers:
   [Nr] Name                          Type                    Address          Off    Size   ES Flg Lk Inf Al
   [ snip ]
@@ -175,23 +182,26 @@ module that patches vmlinux and modules 9p, btrfs, ext4:
   [ snip ]                                       ^                                             ^
                                                  |                                             |
                                                 [*]                                           [*]
-[*] Livepatch relocation sections are SHT_RELA sections but with a few special
-characteristics. Notice that they are marked SHF_ALLOC ("A") so that they will
-not be discarded when the module is loaded into memory, as well as with the
-SHF_RELA_LIVEPATCH flag ("o" - for OS-specific).
+  [*] Livepatch relocation sections are SHT_RELA sections but with a few special
+  characteristics. Notice that they are marked SHF_ALLOC ("A") so that they will
+  not be discarded when the module is loaded into memory, as well as with the
+  SHF_RELA_LIVEPATCH flag ("o" - for OS-specific).
 
 2.2.5 Example `readelf --relocs` output for a patch module:
 -----------------------------------------------------------
-Relocation section '.klp.rela.btrfs.text.btrfs_feature_attr_show' at offset 0x2ba0 contains 4 entries:
-    Offset             Info             Type               Symbol's Value  Symbol's Name + Addend
-000000000000001f  0000005e00000002 R_X86_64_PC32          0000000000000000 .klp.sym.vmlinux.printk,0 - 4
-0000000000000028  0000003d0000000b R_X86_64_32S           0000000000000000 .klp.sym.btrfs.btrfs_ktype,0 + 0
-0000000000000036  0000003b00000002 R_X86_64_PC32          0000000000000000 .klp.sym.btrfs.can_modify_feature.isra.3,0 - 4
-000000000000004c  0000004900000002 R_X86_64_PC32          0000000000000000 .klp.sym.vmlinux.snprintf,0 - 4
-[ snip ]                                                                   ^
-                                                                           |
+
+::
+
+  Relocation section '.klp.rela.btrfs.text.btrfs_feature_attr_show' at offset 0x2ba0 contains 4 entries:
+      Offset             Info             Type               Symbol's Value  Symbol's Name + Addend
+  000000000000001f  0000005e00000002 R_X86_64_PC32          0000000000000000 .klp.sym.vmlinux.printk,0 - 4
+  0000000000000028  0000003d0000000b R_X86_64_32S           0000000000000000 .klp.sym.btrfs.btrfs_ktype,0 + 0
+  0000000000000036  0000003b00000002 R_X86_64_PC32          0000000000000000 .klp.sym.btrfs.can_modify_feature.isra.3,0 - 4
+  000000000000004c  0000004900000002 R_X86_64_PC32          0000000000000000 .klp.sym.vmlinux.snprintf,0 - 4
+  [ snip ]                                                                   ^
+                                                                             |
                                                                           [*]
-[*] Every symbol referenced by a relocation is a livepatch symbol.
+  [*] Every symbol referenced by a relocation is a livepatch symbol.
 
 --------------------
 3. Livepatch symbols
@@ -231,18 +241,19 @@ relocation section refer to their respective symbols with their symbol indices,
 and the original symbol indices (and thus the symtab ordering) must be
 preserved in order for apply_relocate_add() to find the right symbol.
 
-For example, take this particular rela from a livepatch module:
-Relocation section '.klp.rela.btrfs.text.btrfs_feature_attr_show' at offset 0x2ba0 contains 4 entries:
-    Offset             Info             Type               Symbol's Value  Symbol's Name + Addend
-000000000000001f  0000005e00000002 R_X86_64_PC32          0000000000000000 .klp.sym.vmlinux.printk,0 - 4
+For example, take this particular rela from a livepatch module:::
 
-This rela refers to the symbol '.klp.sym.vmlinux.printk,0', and the symbol index is encoded
-in 'Info'. Here its symbol index is 0x5e, which is 94 in decimal, which refers to the
-symbol index 94.
-And in this patch module's corresponding symbol table, symbol index 94 refers to that very symbol:
-[ snip ]
-94: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.printk,0
-[ snip ]
+  Relocation section '.klp.rela.btrfs.text.btrfs_feature_attr_show' at offset 0x2ba0 contains 4 entries:
+      Offset             Info             Type               Symbol's Value  Symbol's Name + Addend
+  000000000000001f  0000005e00000002 R_X86_64_PC32          0000000000000000 .klp.sym.vmlinux.printk,0 - 4
+
+  This rela refers to the symbol '.klp.sym.vmlinux.printk,0', and the symbol index is encoded
+  in 'Info'. Here its symbol index is 0x5e, which is 94 in decimal, which refers to the
+  symbol index 94.
+  And in this patch module's corresponding symbol table, symbol index 94 refers to that very symbol:
+  [ snip ]
+  94: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.printk,0
+  [ snip ]
 
 ---------------------------
 3.3 Livepatch symbol format
@@ -256,42 +267,48 @@ See include/uapi/linux/elf.h for the actual definitions.
 
 3.3.2 Required name format
 --------------------------
-Livepatch symbol names must conform to the following format:
+Livepatch symbol names must conform to the following format::
 
-.klp.sym.objname.symbol_name,sympos
-^       ^^     ^ ^         ^ ^
-|_______||_____| |_________| |
-   [A]     [B]       [C]    [D]
+  .klp.sym.objname.symbol_name,sympos
+  ^       ^^     ^ ^         ^ ^
+  |_______||_____| |_________| |
+     [A]     [B]       [C]    [D]
 
-[A] The symbol name is prefixed with the string ".klp.sym."
-[B] The name of the object (i.e. "vmlinux" or name of module) to
-    which the symbol belongs follows immediately after the prefix.
-[C] The actual name of the symbol.
-[D] The position of the symbol in the object (as according to kallsyms)
-    This is used to differentiate duplicate symbols within the same
-    object. The symbol position is expressed numerically (0, 1, 2...).
-    The symbol position of a unique symbol is 0.
+  [A] The symbol name is prefixed with the string ".klp.sym."
+  [B] The name of the object (i.e. "vmlinux" or name of module) to
+      which the symbol belongs follows immediately after the prefix.
+  [C] The actual name of the symbol.
+  [D] The position of the symbol in the object (as according to kallsyms)
+      This is used to differentiate duplicate symbols within the same
+      object. The symbol position is expressed numerically (0, 1, 2...).
+      The symbol position of a unique symbol is 0.
 
 3.3.3 Example livepatch symbol names:
 -------------------------------------
-.klp.sym.vmlinux.snprintf,0
-.klp.sym.vmlinux.printk,0
-.klp.sym.btrfs.btrfs_ktype,0
+
+::
+
+	.klp.sym.vmlinux.snprintf,0
+	.klp.sym.vmlinux.printk,0
+	.klp.sym.btrfs.btrfs_ktype,0
 
 3.3.4 Example `readelf --symbols` output for a patch module:
 ------------------------------------------------------------
-Symbol table '.symtab' contains 127 entries:
-   Num:    Value          Size Type    Bind   Vis     Ndx         Name
-   [ snip ]
-    73: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.snprintf,0
-    74: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.capable,0
-    75: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.find_next_bit,0
-    76: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.si_swapinfo,0
-  [ snip ]                                               ^
-                                                         |
-                                                        [*]
-[*] Note that the 'Ndx' (Section index) for these symbols is SHN_LIVEPATCH (0xff20).
-    "OS" means OS-specific.
+
+::
+
+  Symbol table '.symtab' contains 127 entries:
+     Num:    Value          Size Type    Bind   Vis     Ndx         Name
+     [ snip ]
+      73: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.snprintf,0
+      74: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.capable,0
+      75: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.find_next_bit,0
+      76: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.si_swapinfo,0
+    [ snip ]                                               ^
+                                                           |
+                                                          [*]
+  [*] Note that the 'Ndx' (Section index) for these symbols is SHN_LIVEPATCH (0xff20).
+      "OS" means OS-specific.
 
 ---------------------------------
 4. Architecture-specific sections
@@ -313,11 +330,11 @@ Since apply_relocate_add() requires access to a module's section headers,
 symbol table, and relocation section indices, Elf information is preserved for
 livepatch modules and is made accessible by the module loader through
 module->klp_info, which is a klp_modinfo struct. When a livepatch module loads,
-this struct is filled in by the module loader. Its fields are documented below:
+this struct is filled in by the module loader. Its fields are documented below::
 
-struct klp_modinfo {
-	Elf_Ehdr hdr; /* Elf header */
-	Elf_Shdr *sechdrs; /* Section header table */
-	char *secstrings; /* String table for the section headers */
-	unsigned int symndx; /* The symbol table section index */
-};
+	struct klp_modinfo {
+		Elf_Ehdr hdr; /* Elf header */
+		Elf_Shdr *sechdrs; /* Section header table */
+		char *secstrings; /* String table for the section headers */
+		unsigned int symndx; /* The symbol table section index */
+	};
diff --git a/Documentation/livepatch/shadow-vars.txt b/Documentation/livepatch/shadow-vars.rst
similarity index 87%
rename from Documentation/livepatch/shadow-vars.txt
rename to Documentation/livepatch/shadow-vars.rst
index ecc09a7be5dd..c05715aeafa4 100644
--- a/Documentation/livepatch/shadow-vars.txt
+++ b/Documentation/livepatch/shadow-vars.rst
@@ -27,10 +27,13 @@ A hashtable references all shadow variables.  These references are
 stored and retrieved through a <obj, id> pair.
 
 * The klp_shadow variable data structure encapsulates both tracking
-meta-data and shadow-data:
+  meta-data and shadow-data:
+
   - meta-data
+
     - obj - pointer to parent object
     - id - data identifier
+
   - data[] - storage for shadow data
 
 It is important to note that the klp_shadow_alloc() and
@@ -47,31 +50,43 @@ to do actions that can be done only once when a new variable is allocated.
 
 * klp_shadow_alloc() - allocate and add a new shadow variable
   - search hashtable for <obj, id> pair
+
   - if exists
+
     - WARN and return NULL
+
   - if <obj, id> doesn't already exist
+
     - allocate a new shadow variable
     - initialize the variable using a custom constructor and data when provided
     - add <obj, id> to the global hashtable
 
 * klp_shadow_get_or_alloc() - get existing or alloc a new shadow variable
   - search hashtable for <obj, id> pair
+
   - if exists
+
     - return existing shadow variable
+
   - if <obj, id> doesn't already exist
+
     - allocate a new shadow variable
     - initialize the variable using a custom constructor and data when provided
     - add <obj, id> pair to the global hashtable
 
 * klp_shadow_free() - detach and free a <obj, id> shadow variable
   - find and remove a <obj, id> reference from global hashtable
+
     - if found
+
       - call destructor function if defined
       - free shadow variable
 
 * klp_shadow_free_all() - detach and free all <*, id> shadow variables
   - find and remove any <*, id> references from global hashtable
+
     - if found
+
       - call destructor function if defined
       - free shadow variable
 
@@ -102,12 +117,12 @@ parent "goes live" (ie, any shadow variable get-API requests are made
 for this <obj, id> pair.)
 
 For commit 1d147bfa6429, when a parent sta_info structure is allocated,
-allocate a shadow copy of the ps_lock pointer, then initialize it:
+allocate a shadow copy of the ps_lock pointer, then initialize it::
 
-#define PS_LOCK 1
-struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
-				const u8 *addr, gfp_t gfp)
-{
+  #define PS_LOCK 1
+  struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
+				  const u8 *addr, gfp_t gfp)
+  {
 	struct sta_info *sta;
 	spinlock_t *ps_lock;
 
@@ -123,10 +138,10 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
 	...
 
 When requiring a ps_lock, query the shadow variable API to retrieve one
-for a specific struct sta_info:
+for a specific struct sta_info:::
 
-void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta)
-{
+  void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta)
+  {
 	spinlock_t *ps_lock;
 
 	/* sync with ieee80211_tx_h_unicast_ps_buf */
@@ -136,10 +151,10 @@ void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta)
 	...
 
 When the parent sta_info structure is freed, first free the shadow
-variable:
+variable::
 
-void sta_info_free(struct ieee80211_local *local, struct sta_info *sta)
-{
+  void sta_info_free(struct ieee80211_local *local, struct sta_info *sta)
+  {
 	klp_shadow_free(sta, PS_LOCK, NULL);
 	kfree(sta);
 	...
@@ -155,19 +170,19 @@ these cases, the klp_shadow_get_or_alloc() call can be used to attach
 shadow variables to parents already in-flight.
 
 For commit 1d147bfa6429, a good spot to allocate a shadow spinlock is
-inside ieee80211_sta_ps_deliver_wakeup():
+inside ieee80211_sta_ps_deliver_wakeup()::
 
-int ps_lock_shadow_ctor(void *obj, void *shadow_data, void *ctor_data)
-{
+  int ps_lock_shadow_ctor(void *obj, void *shadow_data, void *ctor_data)
+  {
 	spinlock_t *lock = shadow_data;
 
 	spin_lock_init(lock);
 	return 0;
-}
+  }
 
-#define PS_LOCK 1
-void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta)
-{
+  #define PS_LOCK 1
+  void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta)
+  {
 	spinlock_t *ps_lock;
 
 	/* sync with ieee80211_tx_h_unicast_ps_buf */
@@ -200,10 +215,12 @@ suggests how to handle the parent object.
 =============
 
 * https://github.com/dynup/kpatch
-The livepatch implementation is based on the kpatch version of shadow
-variables.
+
+  The livepatch implementation is based on the kpatch version of shadow
+  variables.
 
 * http://files.mkgnu.net/files/dynamos/doc/papers/dynamos_eurosys_07.pdf
-Dynamic and Adaptive Updates of Non-Quiescent Subsystems in Commodity
-Operating System Kernels (Kritis Makris, Kyung Dong Ryu 2007) presented
-a datatype update technique called "shadow data structures".
+
+  Dynamic and Adaptive Updates of Non-Quiescent Subsystems in Commodity
+  Operating System Kernels (Kritis Makris, Kyung Dong Ryu 2007) presented
+  a datatype update technique called "shadow data structures".
diff --git a/tools/objtool/Documentation/stack-validation.txt b/tools/objtool/Documentation/stack-validation.txt
index 3995735a878f..8df526c80b65 100644
--- a/tools/objtool/Documentation/stack-validation.txt
+++ b/tools/objtool/Documentation/stack-validation.txt
@@ -111,7 +111,7 @@ c) Higher live patching compatibility rate
    be detectable).  Objtool makes that possible.
 
    For more details, see the livepatch documentation in the Linux kernel
-   source tree at Documentation/livepatch/livepatch.txt.
+   source tree at Documentation/livepatch/livepatch.rst.
 
 Rules
 -----
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 21/79] docs: locking: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (18 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 20/79] docs: livepatch: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 22/79] docs: mic: " Mauro Carvalho Chehab
                     ` (57 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Peter Zijlstra, Ingo Molnar, Will Deacon,
	Federico Vaga, Maarten Lankhorst, Maxime Ripard, Sean Paul,
	David Airlie, Daniel Vetter, dri-devel

Convert the locking documents to ReST and add them to the
kernel development book where it belongs.

Most of the stuff here is just to make Sphinx to properly
parse the text file, as they're already in good shape,
not requiring massive changes in order to be parsed.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/kernel-hacking/locking.rst      |   2 +-
 Documentation/locking/index.rst               |  24 +++
 ...{lockdep-design.txt => lockdep-design.rst} |  41 ++--
 Documentation/locking/lockstat.rst            | 204 ++++++++++++++++++
 Documentation/locking/lockstat.txt            | 183 ----------------
 .../{locktorture.txt => locktorture.rst}      | 105 +++++----
 .../{mutex-design.txt => mutex-design.rst}    |  26 ++-
 ...t-mutex-design.txt => rt-mutex-design.rst} | 139 ++++++------
 .../locking/{rt-mutex.txt => rt-mutex.rst}    |  30 +--
 .../locking/{spinlocks.txt => spinlocks.rst}  |  32 ++-
 ...w-mutex-design.txt => ww-mutex-design.rst} |  82 +++----
 Documentation/pi-futex.txt                    |   2 +-
 .../it_IT/kernel-hacking/locking.rst          |   2 +-
 drivers/gpu/drm/drm_modeset_lock.c            |   2 +-
 include/linux/lockdep.h                       |   2 +-
 include/linux/mutex.h                         |   2 +-
 include/linux/rwsem.h                         |   2 +-
 kernel/locking/mutex.c                        |   2 +-
 kernel/locking/rtmutex.c                      |   2 +-
 lib/Kconfig.debug                             |   4 +-
 20 files changed, 506 insertions(+), 382 deletions(-)
 create mode 100644 Documentation/locking/index.rst
 rename Documentation/locking/{lockdep-design.txt => lockdep-design.rst} (93%)
 create mode 100644 Documentation/locking/lockstat.rst
 delete mode 100644 Documentation/locking/lockstat.txt
 rename Documentation/locking/{locktorture.txt => locktorture.rst} (57%)
 rename Documentation/locking/{mutex-design.txt => mutex-design.rst} (94%)
 rename Documentation/locking/{rt-mutex-design.txt => rt-mutex-design.rst} (91%)
 rename Documentation/locking/{rt-mutex.txt => rt-mutex.rst} (71%)
 rename Documentation/locking/{spinlocks.txt => spinlocks.rst} (89%)
 rename Documentation/locking/{ww-mutex-design.txt => ww-mutex-design.rst} (93%)

diff --git a/Documentation/kernel-hacking/locking.rst b/Documentation/kernel-hacking/locking.rst
index 519673df0e82..71a843464ec2 100644
--- a/Documentation/kernel-hacking/locking.rst
+++ b/Documentation/kernel-hacking/locking.rst
@@ -1364,7 +1364,7 @@ Futex API reference
 Further reading
 ===============
 
--  ``Documentation/locking/spinlocks.txt``: Linus Torvalds' spinlocking
+-  ``Documentation/locking/spinlocks.rst``: Linus Torvalds' spinlocking
    tutorial in the kernel sources.
 
 -  Unix Systems for Modern Architectures: Symmetric Multiprocessing and
diff --git a/Documentation/locking/index.rst b/Documentation/locking/index.rst
new file mode 100644
index 000000000000..ef5da7fe9aac
--- /dev/null
+++ b/Documentation/locking/index.rst
@@ -0,0 +1,24 @@
+:orphan:
+
+=======
+locking
+=======
+
+.. toctree::
+    :maxdepth: 1
+
+    lockdep-design
+    lockstat
+    locktorture
+    mutex-design
+    rt-mutex-design
+    rt-mutex
+    spinlocks
+    ww-mutex-design
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/locking/lockdep-design.txt b/Documentation/locking/lockdep-design.rst
similarity index 93%
rename from Documentation/locking/lockdep-design.txt
rename to Documentation/locking/lockdep-design.rst
index 39fae143c9cb..49707a5029c5 100644
--- a/Documentation/locking/lockdep-design.txt
+++ b/Documentation/locking/lockdep-design.rst
@@ -2,6 +2,7 @@ Runtime locking correctness validator
 =====================================
 
 started by Ingo Molnar <mingo@redhat.com>
+
 additions by Arjan van de Ven <arjan@linux.intel.com>
 
 Lock-class
@@ -42,7 +43,7 @@ Where STATE can be either one of (kernel/locking/lockdep_states.h)
 - 'ever used'                                       [ == !unused        ]
 
 When locking rules are violated, these state bits are presented in the
-locking error messages, inside curlies. A contrived example:
+locking error messages, inside curlies. A contrived example::
 
    modprobe/2287 is trying to acquire lock:
     (&sio_locks[i].lock){-.-.}, at: [<c02867fd>] mutex_lock+0x21/0x24
@@ -54,10 +55,12 @@ locking error messages, inside curlies. A contrived example:
 The bit position indicates STATE, STATE-read, for each of the states listed
 above, and the character displayed in each indicates:
 
+   ===  ===================================================
    '.'  acquired while irqs disabled and not in irq context
    '-'  acquired in irq context
    '+'  acquired with irqs enabled
    '?'  acquired in irq context with irqs enabled.
+   ===  ===================================================
 
 Unused mutexes cannot be part of the cause of an error.
 
@@ -67,7 +70,7 @@ Single-lock state rules:
 
 A softirq-unsafe lock-class is automatically hardirq-unsafe as well. The
 following states are exclusive, and only one of them is allowed to be
-set for any lock-class:
+set for any lock-class::
 
  <hardirq-safe> and <hardirq-unsafe>
  <softirq-safe> and <softirq-unsafe>
@@ -81,7 +84,7 @@ Multi-lock dependency rules:
 The same lock-class must not be acquired twice, because this could lead
 to lock recursion deadlocks.
 
-Furthermore, two locks may not be taken in different order:
+Furthermore, two locks may not be taken in different order::
 
  <L1> -> <L2>
  <L2> -> <L1>
@@ -92,7 +95,7 @@ other locking sequence between the acquire-lock operations, the
 validator will still track all dependencies between locks.)
 
 Furthermore, the following usage based lock dependencies are not allowed
-between any two lock-classes:
+between any two lock-classes::
 
    <hardirq-safe>   ->  <hardirq-unsafe>
    <softirq-safe>   ->  <softirq-unsafe>
@@ -148,16 +151,16 @@ the ordering is not static.
 In order to teach the validator about this correct usage model, new
 versions of the various locking primitives were added that allow you to
 specify a "nesting level". An example call, for the block device mutex,
-looks like this:
+looks like this::
 
-enum bdev_bd_mutex_lock_class
-{
+  enum bdev_bd_mutex_lock_class
+  {
        BD_MUTEX_NORMAL,
        BD_MUTEX_WHOLE,
        BD_MUTEX_PARTITION
-};
+  };
 
- mutex_lock_nested(&bdev->bd_contains->bd_mutex, BD_MUTEX_PARTITION);
+mutex_lock_nested(&bdev->bd_contains->bd_mutex, BD_MUTEX_PARTITION);
 
 In this case the locking is done on a bdev object that is known to be a
 partition.
@@ -178,7 +181,7 @@ must be held: lockdep_assert_held*(&lock) and lockdep_*pin_lock(&lock).
 As the name suggests, lockdep_assert_held* family of macros assert that a
 particular lock is held at a certain time (and generate a WARN() otherwise).
 This annotation is largely used all over the kernel, e.g. kernel/sched/
-core.c
+core.c::
 
   void update_rq_clock(struct rq *rq)
   {
@@ -197,7 +200,7 @@ out to be especially helpful to debug code with callbacks, where an upper
 layer assumes a lock remains taken, but a lower layer thinks it can maybe drop
 and reacquire the lock ("unwittingly" introducing races). lockdep_pin_lock()
 returns a 'struct pin_cookie' that is then used by lockdep_unpin_lock() to check
-that nobody tampered with the lock, e.g. kernel/sched/sched.h
+that nobody tampered with the lock, e.g. kernel/sched/sched.h::
 
   static inline void rq_pin_lock(struct rq *rq, struct rq_flags *rf)
   {
@@ -224,7 +227,7 @@ correctness) in the sense that for every simple, standalone single-task
 locking sequence that occurred at least once during the lifetime of the
 kernel, the validator proves it with a 100% certainty that no
 combination and timing of these locking sequences can cause any class of
-lock related deadlock. [*]
+lock related deadlock. [1]_
 
 I.e. complex multi-CPU and multi-task locking scenarios do not have to
 occur in practice to prove a deadlock: only the simple 'component'
@@ -243,7 +246,9 @@ possible combination of locking interaction between CPUs, combined with
 every possible hardirq and softirq nesting scenario (which is impossible
 to do in practice).
 
-[*] assuming that the validator itself is 100% correct, and no other
+.. [1]
+
+    assuming that the validator itself is 100% correct, and no other
     part of the system corrupts the state of the validator in any way.
     We also assume that all NMI/SMM paths [which could interrupt
     even hardirq-disabled codepaths] are correct and do not interfere
@@ -254,7 +259,7 @@ to do in practice).
 Performance:
 ------------
 
-The above rules require _massive_ amounts of runtime checking. If we did
+The above rules require **massive** amounts of runtime checking. If we did
 that for every lock taken and for every irqs-enable event, it would
 render the system practically unusably slow. The complexity of checking
 is O(N^2), so even with just a few hundred lock-classes we'd have to do
@@ -313,17 +318,17 @@ be harder to do than to say.
 
 Of course, if you do run out of lock classes, the next thing to do is
 to find the offending lock classes.  First, the following command gives
-you the number of lock classes currently in use along with the maximum:
+you the number of lock classes currently in use along with the maximum::
 
 	grep "lock-classes" /proc/lockdep_stats
 
-This command produces the following output on a modest system:
+This command produces the following output on a modest system::
 
-	 lock-classes:                          748 [max: 8191]
+	lock-classes:                          748 [max: 8191]
 
 If the number allocated (748 above) increases continually over time,
 then there is likely a leak.  The following command can be used to
-identify the leaking lock classes:
+identify the leaking lock classes::
 
 	grep "BD" /proc/lockdep
 
diff --git a/Documentation/locking/lockstat.rst b/Documentation/locking/lockstat.rst
new file mode 100644
index 000000000000..536eab8dbd99
--- /dev/null
+++ b/Documentation/locking/lockstat.rst
@@ -0,0 +1,204 @@
+===============
+Lock Statistics
+===============
+
+What
+====
+
+As the name suggests, it provides statistics on locks.
+
+
+Why
+===
+
+Because things like lock contention can severely impact performance.
+
+How
+===
+
+Lockdep already has hooks in the lock functions and maps lock instances to
+lock classes. We build on that (see Documentation/locking/lockdep-design.rst).
+The graph below shows the relation between the lock functions and the various
+hooks therein::
+
+        __acquire
+            |
+           lock _____
+            |        \
+            |    __contended
+            |         |
+            |       <wait>
+            | _______/
+            |/
+            |
+       __acquired
+            |
+            .
+          <hold>
+            .
+            |
+       __release
+            |
+         unlock
+
+  lock, unlock	- the regular lock functions
+  __*		- the hooks
+  <> 		- states
+
+With these hooks we provide the following statistics:
+
+ con-bounces
+	- number of lock contention that involved x-cpu data
+ contentions
+	- number of lock acquisitions that had to wait
+ wait time
+     min
+	- shortest (non-0) time we ever had to wait for a lock
+     max
+	- longest time we ever had to wait for a lock
+     total
+	- total time we spend waiting on this lock
+     avg
+	- average time spent waiting on this lock
+ acq-bounces
+	- number of lock acquisitions that involved x-cpu data
+ acquisitions
+	- number of times we took the lock
+ hold time
+     min
+	- shortest (non-0) time we ever held the lock
+     max
+	- longest time we ever held the lock
+     total
+	- total time this lock was held
+     avg
+	- average time this lock was held
+
+These numbers are gathered per lock class, per read/write state (when
+applicable).
+
+It also tracks 4 contention points per class. A contention point is a call site
+that had to wait on lock acquisition.
+
+Configuration
+-------------
+
+Lock statistics are enabled via CONFIG_LOCK_STAT.
+
+Usage
+-----
+
+Enable collection of statistics::
+
+	# echo 1 >/proc/sys/kernel/lock_stat
+
+Disable collection of statistics::
+
+	# echo 0 >/proc/sys/kernel/lock_stat
+
+Look at the current lock statistics::
+
+  ( line numbers not part of actual output, done for clarity in the explanation
+    below )
+
+  # less /proc/lock_stat
+
+  01 lock_stat version 0.4
+  02-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+  03                              class name    con-bounces    contentions   waittime-min   waittime-max waittime-total   waittime-avg    acq-bounces   acquisitions   holdtime-min   holdtime-max holdtime-total   holdtime-avg
+  04-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+  05
+  06                         &mm->mmap_sem-W:            46             84           0.26         939.10       16371.53         194.90          47291        2922365           0.16     2220301.69 17464026916.32        5975.99
+  07                         &mm->mmap_sem-R:            37            100           1.31      299502.61      325629.52        3256.30         212344       34316685           0.10        7744.91    95016910.20           2.77
+  08                         ---------------
+  09                           &mm->mmap_sem              1          [<ffffffff811502a7>] khugepaged_scan_mm_slot+0x57/0x280
+  10                           &mm->mmap_sem             96          [<ffffffff815351c4>] __do_page_fault+0x1d4/0x510
+  11                           &mm->mmap_sem             34          [<ffffffff81113d77>] vm_mmap_pgoff+0x87/0xd0
+  12                           &mm->mmap_sem             17          [<ffffffff81127e71>] vm_munmap+0x41/0x80
+  13                         ---------------
+  14                           &mm->mmap_sem              1          [<ffffffff81046fda>] dup_mmap+0x2a/0x3f0
+  15                           &mm->mmap_sem             60          [<ffffffff81129e29>] SyS_mprotect+0xe9/0x250
+  16                           &mm->mmap_sem             41          [<ffffffff815351c4>] __do_page_fault+0x1d4/0x510
+  17                           &mm->mmap_sem             68          [<ffffffff81113d77>] vm_mmap_pgoff+0x87/0xd0
+  18
+  19.............................................................................................................................................................................................................................
+  20
+  21                         unix_table_lock:           110            112           0.21          49.24         163.91           1.46          21094          66312           0.12         624.42       31589.81           0.48
+  22                         ---------------
+  23                         unix_table_lock             45          [<ffffffff8150ad8e>] unix_create1+0x16e/0x1b0
+  24                         unix_table_lock             47          [<ffffffff8150b111>] unix_release_sock+0x31/0x250
+  25                         unix_table_lock             15          [<ffffffff8150ca37>] unix_find_other+0x117/0x230
+  26                         unix_table_lock              5          [<ffffffff8150a09f>] unix_autobind+0x11f/0x1b0
+  27                         ---------------
+  28                         unix_table_lock             39          [<ffffffff8150b111>] unix_release_sock+0x31/0x250
+  29                         unix_table_lock             49          [<ffffffff8150ad8e>] unix_create1+0x16e/0x1b0
+  30                         unix_table_lock             20          [<ffffffff8150ca37>] unix_find_other+0x117/0x230
+  31                         unix_table_lock              4          [<ffffffff8150a09f>] unix_autobind+0x11f/0x1b0
+
+
+This excerpt shows the first two lock class statistics. Line 01 shows the
+output version - each time the format changes this will be updated. Line 02-04
+show the header with column descriptions. Lines 05-18 and 20-31 show the actual
+statistics. These statistics come in two parts; the actual stats separated by a
+short separator (line 08, 13) from the contention points.
+
+Lines 09-12 show the first 4 recorded contention points (the code
+which tries to get the lock) and lines 14-17 show the first 4 recorded
+contended points (the lock holder). It is possible that the max
+con-bounces point is missing in the statistics.
+
+The first lock (05-18) is a read/write lock, and shows two lines above the
+short separator. The contention points don't match the column descriptors,
+they have two: contentions and [<IP>] symbol. The second set of contention
+points are the points we're contending with.
+
+The integer part of the time values is in us.
+
+Dealing with nested locks, subclasses may appear::
+
+  32...........................................................................................................................................................................................................................
+  33
+  34                               &rq->lock:       13128          13128           0.43         190.53      103881.26           7.91          97454        3453404           0.00         401.11    13224683.11           3.82
+  35                               ---------
+  36                               &rq->lock          645          [<ffffffff8103bfc4>] task_rq_lock+0x43/0x75
+  37                               &rq->lock          297          [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a
+  38                               &rq->lock          360          [<ffffffff8103c4c5>] select_task_rq_fair+0x1f0/0x74a
+  39                               &rq->lock          428          [<ffffffff81045f98>] scheduler_tick+0x46/0x1fb
+  40                               ---------
+  41                               &rq->lock           77          [<ffffffff8103bfc4>] task_rq_lock+0x43/0x75
+  42                               &rq->lock          174          [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a
+  43                               &rq->lock         4715          [<ffffffff8103ed4b>] double_rq_lock+0x42/0x54
+  44                               &rq->lock          893          [<ffffffff81340524>] schedule+0x157/0x7b8
+  45
+  46...........................................................................................................................................................................................................................
+  47
+  48                             &rq->lock/1:        1526          11488           0.33         388.73      136294.31          11.86          21461          38404           0.00          37.93      109388.53           2.84
+  49                             -----------
+  50                             &rq->lock/1        11526          [<ffffffff8103ed58>] double_rq_lock+0x4f/0x54
+  51                             -----------
+  52                             &rq->lock/1         5645          [<ffffffff8103ed4b>] double_rq_lock+0x42/0x54
+  53                             &rq->lock/1         1224          [<ffffffff81340524>] schedule+0x157/0x7b8
+  54                             &rq->lock/1         4336          [<ffffffff8103ed58>] double_rq_lock+0x4f/0x54
+  55                             &rq->lock/1          181          [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a
+
+Line 48 shows statistics for the second subclass (/1) of &rq->lock class
+(subclass starts from 0), since in this case, as line 50 suggests,
+double_rq_lock actually acquires a nested lock of two spinlocks.
+
+View the top contending locks::
+
+  # grep : /proc/lock_stat | head
+			clockevents_lock:       2926159        2947636           0.15       46882.81  1784540466.34         605.41        3381345        3879161           0.00        2260.97    53178395.68          13.71
+		     tick_broadcast_lock:        346460         346717           0.18        2257.43    39364622.71         113.54        3642919        4242696           0.00        2263.79    49173646.60          11.59
+		  &mapping->i_mmap_mutex:        203896         203899           3.36      645530.05 31767507988.39      155800.21        3361776        8893984           0.17        2254.15    14110121.02           1.59
+			       &rq->lock:        135014         136909           0.18         606.09      842160.68           6.15        1540728       10436146           0.00         728.72    17606683.41           1.69
+	       &(&zone->lru_lock)->rlock:         93000          94934           0.16          59.18      188253.78           1.98        1199912        3809894           0.15         391.40     3559518.81           0.93
+			 tasklist_lock-W:         40667          41130           0.23        1189.42      428980.51          10.43         270278         510106           0.16         653.51     3939674.91           7.72
+			 tasklist_lock-R:         21298          21305           0.20        1310.05      215511.12          10.12         186204         241258           0.14        1162.33     1179779.23           4.89
+			      rcu_node_1:         47656          49022           0.16         635.41      193616.41           3.95         844888        1865423           0.00         764.26     1656226.96           0.89
+       &(&dentry->d_lockref.lock)->rlock:         39791          40179           0.15        1302.08       88851.96           2.21        2790851       12527025           0.10        1910.75     3379714.27           0.27
+			      rcu_node_0:         29203          30064           0.16         786.55     1555573.00          51.74          88963         244254           0.00         398.87      428872.51           1.76
+
+Clear the statistics::
+
+  # echo 0 > /proc/lock_stat
diff --git a/Documentation/locking/lockstat.txt b/Documentation/locking/lockstat.txt
deleted file mode 100644
index fdbeb0c45ef3..000000000000
--- a/Documentation/locking/lockstat.txt
+++ /dev/null
@@ -1,183 +0,0 @@
-
-LOCK STATISTICS
-
-- WHAT
-
-As the name suggests, it provides statistics on locks.
-
-- WHY
-
-Because things like lock contention can severely impact performance.
-
-- HOW
-
-Lockdep already has hooks in the lock functions and maps lock instances to
-lock classes. We build on that (see Documentation/locking/lockdep-design.txt).
-The graph below shows the relation between the lock functions and the various
-hooks therein.
-
-        __acquire
-            |
-           lock _____
-            |        \
-            |    __contended
-            |         |
-            |       <wait>
-            | _______/
-            |/
-            |
-       __acquired
-            |
-            .
-          <hold>
-            .
-            |
-       __release
-            |
-         unlock
-
-lock, unlock	- the regular lock functions
-__*		- the hooks
-<> 		- states
-
-With these hooks we provide the following statistics:
-
- con-bounces       - number of lock contention that involved x-cpu data
- contentions       - number of lock acquisitions that had to wait
- wait time min     - shortest (non-0) time we ever had to wait for a lock
-           max     - longest time we ever had to wait for a lock
-	   total   - total time we spend waiting on this lock
-	   avg     - average time spent waiting on this lock
- acq-bounces       - number of lock acquisitions that involved x-cpu data
- acquisitions      - number of times we took the lock
- hold time min     - shortest (non-0) time we ever held the lock
-	   max     - longest time we ever held the lock
-	   total   - total time this lock was held
-	   avg     - average time this lock was held
-
-These numbers are gathered per lock class, per read/write state (when
-applicable).
-
-It also tracks 4 contention points per class. A contention point is a call site
-that had to wait on lock acquisition.
-
- - CONFIGURATION
-
-Lock statistics are enabled via CONFIG_LOCK_STAT.
-
- - USAGE
-
-Enable collection of statistics:
-
-# echo 1 >/proc/sys/kernel/lock_stat
-
-Disable collection of statistics:
-
-# echo 0 >/proc/sys/kernel/lock_stat
-
-Look at the current lock statistics:
-
-( line numbers not part of actual output, done for clarity in the explanation
-  below )
-
-# less /proc/lock_stat
-
-01 lock_stat version 0.4
-02-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-03                              class name    con-bounces    contentions   waittime-min   waittime-max waittime-total   waittime-avg    acq-bounces   acquisitions   holdtime-min   holdtime-max holdtime-total   holdtime-avg
-04-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-05
-06                         &mm->mmap_sem-W:            46             84           0.26         939.10       16371.53         194.90          47291        2922365           0.16     2220301.69 17464026916.32        5975.99
-07                         &mm->mmap_sem-R:            37            100           1.31      299502.61      325629.52        3256.30         212344       34316685           0.10        7744.91    95016910.20           2.77
-08                         ---------------
-09                           &mm->mmap_sem              1          [<ffffffff811502a7>] khugepaged_scan_mm_slot+0x57/0x280
-10                           &mm->mmap_sem             96          [<ffffffff815351c4>] __do_page_fault+0x1d4/0x510
-11                           &mm->mmap_sem             34          [<ffffffff81113d77>] vm_mmap_pgoff+0x87/0xd0
-12                           &mm->mmap_sem             17          [<ffffffff81127e71>] vm_munmap+0x41/0x80
-13                         ---------------
-14                           &mm->mmap_sem              1          [<ffffffff81046fda>] dup_mmap+0x2a/0x3f0
-15                           &mm->mmap_sem             60          [<ffffffff81129e29>] SyS_mprotect+0xe9/0x250
-16                           &mm->mmap_sem             41          [<ffffffff815351c4>] __do_page_fault+0x1d4/0x510
-17                           &mm->mmap_sem             68          [<ffffffff81113d77>] vm_mmap_pgoff+0x87/0xd0
-18
-19.............................................................................................................................................................................................................................
-20
-21                         unix_table_lock:           110            112           0.21          49.24         163.91           1.46          21094          66312           0.12         624.42       31589.81           0.48
-22                         ---------------
-23                         unix_table_lock             45          [<ffffffff8150ad8e>] unix_create1+0x16e/0x1b0
-24                         unix_table_lock             47          [<ffffffff8150b111>] unix_release_sock+0x31/0x250
-25                         unix_table_lock             15          [<ffffffff8150ca37>] unix_find_other+0x117/0x230
-26                         unix_table_lock              5          [<ffffffff8150a09f>] unix_autobind+0x11f/0x1b0
-27                         ---------------
-28                         unix_table_lock             39          [<ffffffff8150b111>] unix_release_sock+0x31/0x250
-29                         unix_table_lock             49          [<ffffffff8150ad8e>] unix_create1+0x16e/0x1b0
-30                         unix_table_lock             20          [<ffffffff8150ca37>] unix_find_other+0x117/0x230
-31                         unix_table_lock              4          [<ffffffff8150a09f>] unix_autobind+0x11f/0x1b0
-
-
-This excerpt shows the first two lock class statistics. Line 01 shows the
-output version - each time the format changes this will be updated. Line 02-04
-show the header with column descriptions. Lines 05-18 and 20-31 show the actual
-statistics. These statistics come in two parts; the actual stats separated by a
-short separator (line 08, 13) from the contention points.
-
-Lines 09-12 show the first 4 recorded contention points (the code
-which tries to get the lock) and lines 14-17 show the first 4 recorded
-contended points (the lock holder). It is possible that the max
-con-bounces point is missing in the statistics.
-
-The first lock (05-18) is a read/write lock, and shows two lines above the
-short separator. The contention points don't match the column descriptors,
-they have two: contentions and [<IP>] symbol. The second set of contention
-points are the points we're contending with.
-
-The integer part of the time values is in us.
-
-Dealing with nested locks, subclasses may appear:
-
-32...........................................................................................................................................................................................................................
-33
-34                               &rq->lock:       13128          13128           0.43         190.53      103881.26           7.91          97454        3453404           0.00         401.11    13224683.11           3.82
-35                               ---------
-36                               &rq->lock          645          [<ffffffff8103bfc4>] task_rq_lock+0x43/0x75
-37                               &rq->lock          297          [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a
-38                               &rq->lock          360          [<ffffffff8103c4c5>] select_task_rq_fair+0x1f0/0x74a
-39                               &rq->lock          428          [<ffffffff81045f98>] scheduler_tick+0x46/0x1fb
-40                               ---------
-41                               &rq->lock           77          [<ffffffff8103bfc4>] task_rq_lock+0x43/0x75
-42                               &rq->lock          174          [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a
-43                               &rq->lock         4715          [<ffffffff8103ed4b>] double_rq_lock+0x42/0x54
-44                               &rq->lock          893          [<ffffffff81340524>] schedule+0x157/0x7b8
-45
-46...........................................................................................................................................................................................................................
-47
-48                             &rq->lock/1:        1526          11488           0.33         388.73      136294.31          11.86          21461          38404           0.00          37.93      109388.53           2.84
-49                             -----------
-50                             &rq->lock/1        11526          [<ffffffff8103ed58>] double_rq_lock+0x4f/0x54
-51                             -----------
-52                             &rq->lock/1         5645          [<ffffffff8103ed4b>] double_rq_lock+0x42/0x54
-53                             &rq->lock/1         1224          [<ffffffff81340524>] schedule+0x157/0x7b8
-54                             &rq->lock/1         4336          [<ffffffff8103ed58>] double_rq_lock+0x4f/0x54
-55                             &rq->lock/1          181          [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a
-
-Line 48 shows statistics for the second subclass (/1) of &rq->lock class
-(subclass starts from 0), since in this case, as line 50 suggests,
-double_rq_lock actually acquires a nested lock of two spinlocks.
-
-View the top contending locks:
-
-# grep : /proc/lock_stat | head
-			clockevents_lock:       2926159        2947636           0.15       46882.81  1784540466.34         605.41        3381345        3879161           0.00        2260.97    53178395.68          13.71
-		     tick_broadcast_lock:        346460         346717           0.18        2257.43    39364622.71         113.54        3642919        4242696           0.00        2263.79    49173646.60          11.59
-		  &mapping->i_mmap_mutex:        203896         203899           3.36      645530.05 31767507988.39      155800.21        3361776        8893984           0.17        2254.15    14110121.02           1.59
-			       &rq->lock:        135014         136909           0.18         606.09      842160.68           6.15        1540728       10436146           0.00         728.72    17606683.41           1.69
-	       &(&zone->lru_lock)->rlock:         93000          94934           0.16          59.18      188253.78           1.98        1199912        3809894           0.15         391.40     3559518.81           0.93
-			 tasklist_lock-W:         40667          41130           0.23        1189.42      428980.51          10.43         270278         510106           0.16         653.51     3939674.91           7.72
-			 tasklist_lock-R:         21298          21305           0.20        1310.05      215511.12          10.12         186204         241258           0.14        1162.33     1179779.23           4.89
-			      rcu_node_1:         47656          49022           0.16         635.41      193616.41           3.95         844888        1865423           0.00         764.26     1656226.96           0.89
-       &(&dentry->d_lockref.lock)->rlock:         39791          40179           0.15        1302.08       88851.96           2.21        2790851       12527025           0.10        1910.75     3379714.27           0.27
-			      rcu_node_0:         29203          30064           0.16         786.55     1555573.00          51.74          88963         244254           0.00         398.87      428872.51           1.76
-
-Clear the statistics:
-
-# echo 0 > /proc/lock_stat
diff --git a/Documentation/locking/locktorture.txt b/Documentation/locking/locktorture.rst
similarity index 57%
rename from Documentation/locking/locktorture.txt
rename to Documentation/locking/locktorture.rst
index 6a8df4cd19bf..e79eeeca3ac6 100644
--- a/Documentation/locking/locktorture.txt
+++ b/Documentation/locking/locktorture.rst
@@ -1,6 +1,9 @@
+==================================
 Kernel Lock Torture Test Operation
+==================================
 
 CONFIG_LOCK_TORTURE_TEST
+========================
 
 The CONFIG LOCK_TORTURE_TEST config option provides a kernel module
 that runs torture tests on core kernel locking primitives. The kernel
@@ -18,61 +21,77 @@ can be simulated by either enlarging this critical region hold time and/or
 creating more kthreads.
 
 
-MODULE PARAMETERS
+Module Parameters
+=================
 
 This module has the following parameters:
 
 
-	    ** Locktorture-specific **
+Locktorture-specific
+--------------------
 
-nwriters_stress   Number of kernel threads that will stress exclusive lock
+nwriters_stress
+		  Number of kernel threads that will stress exclusive lock
 		  ownership (writers). The default value is twice the number
 		  of online CPUs.
 
-nreaders_stress   Number of kernel threads that will stress shared lock
+nreaders_stress
+		  Number of kernel threads that will stress shared lock
 		  ownership (readers). The default is the same amount of writer
 		  locks. If the user did not specify nwriters_stress, then
 		  both readers and writers be the amount of online CPUs.
 
-torture_type	  Type of lock to torture. By default, only spinlocks will
+torture_type
+		  Type of lock to torture. By default, only spinlocks will
 		  be tortured. This module can torture the following locks,
 		  with string values as follows:
 
-		     o "lock_busted": Simulates a buggy lock implementation.
+		     - "lock_busted":
+				Simulates a buggy lock implementation.
 
-		     o "spin_lock": spin_lock() and spin_unlock() pairs.
+		     - "spin_lock":
+				spin_lock() and spin_unlock() pairs.
 
-		     o "spin_lock_irq": spin_lock_irq() and spin_unlock_irq()
-					pairs.
+		     - "spin_lock_irq":
+				spin_lock_irq() and spin_unlock_irq() pairs.
 
-		     o "rw_lock": read/write lock() and unlock() rwlock pairs.
+		     - "rw_lock":
+				read/write lock() and unlock() rwlock pairs.
 
-		     o "rw_lock_irq": read/write lock_irq() and unlock_irq()
-				      rwlock pairs.
+		     - "rw_lock_irq":
+				read/write lock_irq() and unlock_irq()
+				rwlock pairs.
 
-		     o "mutex_lock": mutex_lock() and mutex_unlock() pairs.
+		     - "mutex_lock":
+				mutex_lock() and mutex_unlock() pairs.
 
-		     o "rtmutex_lock": rtmutex_lock() and rtmutex_unlock()
-				       pairs. Kernel must have CONFIG_RT_MUTEX=y.
+		     - "rtmutex_lock":
+				rtmutex_lock() and rtmutex_unlock() pairs.
+				Kernel must have CONFIG_RT_MUTEX=y.
 
-		     o "rwsem_lock": read/write down() and up() semaphore pairs.
+		     - "rwsem_lock":
+				read/write down() and up() semaphore pairs.
 
 
-	    ** Torture-framework (RCU + locking) **
+Torture-framework (RCU + locking)
+---------------------------------
 
-shutdown_secs	  The number of seconds to run the test before terminating
+shutdown_secs
+		  The number of seconds to run the test before terminating
 		  the test and powering off the system.  The default is
 		  zero, which disables test termination and system shutdown.
 		  This capability is useful for automated testing.
 
-onoff_interval	  The number of seconds between each attempt to execute a
+onoff_interval
+		  The number of seconds between each attempt to execute a
 		  randomly selected CPU-hotplug operation.  Defaults
 		  to zero, which disables CPU hotplugging.  In
 		  CONFIG_HOTPLUG_CPU=n kernels, locktorture will silently
 		  refuse to do any CPU-hotplug operations regardless of
 		  what value is specified for onoff_interval.
 
-onoff_holdoff	  The number of seconds to wait until starting CPU-hotplug
+onoff_holdoff
+		  The number of seconds to wait until starting CPU-hotplug
 		  operations.  This would normally only be used when
 		  locktorture was built into the kernel and started
 		  automatically at boot time, in which case it is useful
@@ -80,53 +99,59 @@ onoff_holdoff	  The number of seconds to wait until starting CPU-hotplug
 		  coming and going. This parameter is only useful if
 		  CONFIG_HOTPLUG_CPU is enabled.
 
-stat_interval	  Number of seconds between statistics-related printk()s.
+stat_interval
+		  Number of seconds between statistics-related printk()s.
 		  By default, locktorture will report stats every 60 seconds.
 		  Setting the interval to zero causes the statistics to
 		  be printed -only- when the module is unloaded, and this
 		  is the default.
 
-stutter		  The length of time to run the test before pausing for this
+stutter
+		  The length of time to run the test before pausing for this
 		  same period of time.  Defaults to "stutter=5", so as
 		  to run and pause for (roughly) five-second intervals.
 		  Specifying "stutter=0" causes the test to run continuously
 		  without pausing, which is the old default behavior.
 
-shuffle_interval  The number of seconds to keep the test threads affinitied
+shuffle_interval
+		  The number of seconds to keep the test threads affinitied
 		  to a particular subset of the CPUs, defaults to 3 seconds.
 		  Used in conjunction with test_no_idle_hz.
 
-verbose		  Enable verbose debugging printing, via printk(). Enabled
+verbose
+		  Enable verbose debugging printing, via printk(). Enabled
 		  by default. This extra information is mostly related to
 		  high-level errors and reports from the main 'torture'
 		  framework.
 
 
-STATISTICS
+Statistics
+==========
 
-Statistics are printed in the following format:
+Statistics are printed in the following format::
 
-spin_lock-torture: Writes:  Total: 93746064  Max/Min: 0/0   Fail: 0
-   (A)		    (B)		   (C)		  (D)	       (E)
+  spin_lock-torture: Writes:  Total: 93746064  Max/Min: 0/0   Fail: 0
+     (A)		    (B)		   (C)		  (D)	       (E)
 
-(A): Lock type that is being tortured -- torture_type parameter.
+  (A): Lock type that is being tortured -- torture_type parameter.
 
-(B): Number of writer lock acquisitions. If dealing with a read/write primitive
-     a second "Reads" statistics line is printed.
+  (B): Number of writer lock acquisitions. If dealing with a read/write
+       primitive a second "Reads" statistics line is printed.
 
-(C): Number of times the lock was acquired.
+  (C): Number of times the lock was acquired.
 
-(D): Min and max number of times threads failed to acquire the lock.
+  (D): Min and max number of times threads failed to acquire the lock.
 
-(E): true/false values if there were errors acquiring the lock. This should
-     -only- be positive if there is a bug in the locking primitive's
-     implementation. Otherwise a lock should never fail (i.e., spin_lock()).
-     Of course, the same applies for (C), above. A dummy example of this is
-     the "lock_busted" type.
+  (E): true/false values if there were errors acquiring the lock. This should
+       -only- be positive if there is a bug in the locking primitive's
+       implementation. Otherwise a lock should never fail (i.e., spin_lock()).
+       Of course, the same applies for (C), above. A dummy example of this is
+       the "lock_busted" type.
 
-USAGE
+Usage
+=====
 
-The following script may be used to torture locks:
+The following script may be used to torture locks::
 
 	#!/bin/sh
 
diff --git a/Documentation/locking/mutex-design.txt b/Documentation/locking/mutex-design.rst
similarity index 94%
rename from Documentation/locking/mutex-design.txt
rename to Documentation/locking/mutex-design.rst
index 818aca19612f..4d8236b81fa5 100644
--- a/Documentation/locking/mutex-design.txt
+++ b/Documentation/locking/mutex-design.rst
@@ -1,6 +1,9 @@
+=======================
 Generic Mutex Subsystem
+=======================
 
 started by Ingo Molnar <mingo@redhat.com>
+
 updated by Davidlohr Bueso <davidlohr@hp.com>
 
 What are mutexes?
@@ -23,7 +26,7 @@ Implementation
 Mutexes are represented by 'struct mutex', defined in include/linux/mutex.h
 and implemented in kernel/locking/mutex.c. These locks use an atomic variable
 (->owner) to keep track of the lock state during its lifetime.  Field owner
-actually contains 'struct task_struct *' to the current lock owner and it is
+actually contains `struct task_struct *` to the current lock owner and it is
 therefore NULL if not currently owned. Since task_struct pointers are aligned
 at at least L1_CACHE_BYTES, low bits (3) are used to store extra state (e.g.,
 if waiter list is non-empty).  In its most basic form it also includes a
@@ -101,29 +104,36 @@ features that make lock debugging easier and faster:
 
 Interfaces
 ----------
-Statically define the mutex:
+Statically define the mutex::
+
    DEFINE_MUTEX(name);
 
-Dynamically initialize the mutex:
+Dynamically initialize the mutex::
+
    mutex_init(mutex);
 
-Acquire the mutex, uninterruptible:
+Acquire the mutex, uninterruptible::
+
    void mutex_lock(struct mutex *lock);
    void mutex_lock_nested(struct mutex *lock, unsigned int subclass);
    int  mutex_trylock(struct mutex *lock);
 
-Acquire the mutex, interruptible:
+Acquire the mutex, interruptible::
+
    int mutex_lock_interruptible_nested(struct mutex *lock,
 				       unsigned int subclass);
    int mutex_lock_interruptible(struct mutex *lock);
 
-Acquire the mutex, interruptible, if dec to 0:
+Acquire the mutex, interruptible, if dec to 0::
+
    int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock);
 
-Unlock the mutex:
+Unlock the mutex::
+
    void mutex_unlock(struct mutex *lock);
 
-Test if the mutex is taken:
+Test if the mutex is taken::
+
    int mutex_is_locked(struct mutex *lock);
 
 Disadvantages
diff --git a/Documentation/locking/rt-mutex-design.txt b/Documentation/locking/rt-mutex-design.rst
similarity index 91%
rename from Documentation/locking/rt-mutex-design.txt
rename to Documentation/locking/rt-mutex-design.rst
index 3d7b865539cc..59c2a64efb21 100644
--- a/Documentation/locking/rt-mutex-design.txt
+++ b/Documentation/locking/rt-mutex-design.rst
@@ -1,14 +1,15 @@
-#
-# Copyright (c) 2006 Steven Rostedt
-# Licensed under the GNU Free Documentation License, Version 1.2
-#
-
+==============================
 RT-mutex implementation design
-------------------------------
+==============================
+
+Copyright (c) 2006 Steven Rostedt
+
+Licensed under the GNU Free Documentation License, Version 1.2
+
 
 This document tries to describe the design of the rtmutex.c implementation.
 It doesn't describe the reasons why rtmutex.c exists. For that please see
-Documentation/locking/rt-mutex.txt.  Although this document does explain problems
+Documentation/locking/rt-mutex.rst.  Although this document does explain problems
 that happen without this code, but that is in the concept to understand
 what the code actually is doing.
 
@@ -41,17 +42,17 @@ to release the lock, because for all we know, B is a CPU hog and will
 never give C a chance to release the lock.  This is called unbounded priority
 inversion.
 
-Here's a little ASCII art to show the problem.
+Here's a little ASCII art to show the problem::
 
-   grab lock L1 (owned by C)
-     |
-A ---+
-        C preempted by B
-          |
-C    +----+
+     grab lock L1 (owned by C)
+       |
+  A ---+
+          C preempted by B
+            |
+  C    +----+
 
-B         +-------->
-                B now keeps A from running.
+  B         +-------->
+                  B now keeps A from running.
 
 
 Priority Inheritance (PI)
@@ -75,24 +76,29 @@ Terminology
 Here I explain some terminology that is used in this document to help describe
 the design that is used to implement PI.
 
-PI chain - The PI chain is an ordered series of locks and processes that cause
+PI chain
+         - The PI chain is an ordered series of locks and processes that cause
            processes to inherit priorities from a previous process that is
            blocked on one of its locks.  This is described in more detail
            later in this document.
 
-mutex    - In this document, to differentiate from locks that implement
+mutex
+         - In this document, to differentiate from locks that implement
            PI and spin locks that are used in the PI code, from now on
            the PI locks will be called a mutex.
 
-lock     - In this document from now on, I will use the term lock when
+lock
+         - In this document from now on, I will use the term lock when
            referring to spin locks that are used to protect parts of the PI
            algorithm.  These locks disable preemption for UP (when
            CONFIG_PREEMPT is enabled) and on SMP prevents multiple CPUs from
            entering critical sections simultaneously.
 
-spin lock - Same as lock above.
+spin lock
+         - Same as lock above.
 
-waiter   - A waiter is a struct that is stored on the stack of a blocked
+waiter
+         - A waiter is a struct that is stored on the stack of a blocked
            process.  Since the scope of the waiter is within the code for
            a process being blocked on the mutex, it is fine to allocate
            the waiter on the process's stack (local variable).  This
@@ -104,14 +110,18 @@ waiter   - A waiter is a struct that is stored on the stack of a blocked
            waiter is sometimes used in reference to the task that is waiting
            on a mutex. This is the same as waiter->task.
 
-waiters  - A list of processes that are blocked on a mutex.
+waiters
+         - A list of processes that are blocked on a mutex.
 
-top waiter - The highest priority process waiting on a specific mutex.
+top waiter
+         - The highest priority process waiting on a specific mutex.
 
-top pi waiter - The highest priority process waiting on one of the mutexes
+top pi waiter
+              - The highest priority process waiting on one of the mutexes
                 that a specific process owns.
 
-Note:  task and process are used interchangeably in this document, mostly to
+Note:
+       task and process are used interchangeably in this document, mostly to
        differentiate between two processes that are being described together.
 
 
@@ -123,7 +133,7 @@ inheritance to take place.  Multiple chains may converge, but a chain
 would never diverge, since a process can't be blocked on more than one
 mutex at a time.
 
-Example:
+Example::
 
    Process:  A, B, C, D, E
    Mutexes:  L1, L2, L3, L4
@@ -137,21 +147,21 @@ Example:
                          D owns L4
                                 E blocked on L4
 
-The chain would be:
+The chain would be::
 
    E->L4->D->L3->C->L2->B->L1->A
 
 To show where two chains merge, we could add another process F and
 another mutex L5 where B owns L5 and F is blocked on mutex L5.
 
-The chain for F would be:
+The chain for F would be::
 
    F->L5->B->L1->A
 
 Since a process may own more than one mutex, but never be blocked on more than
 one, the chains merge.
 
-Here we show both chains:
+Here we show both chains::
 
    E->L4->D->L3->C->L2-+
                        |
@@ -165,12 +175,12 @@ than the processes to the left or below in the chain.
 
 Also since a mutex may have more than one process blocked on it, we can
 have multiple chains merge at mutexes.  If we add another process G that is
-blocked on mutex L2:
+blocked on mutex L2::
 
   G->L2->B->L1->A
 
 And once again, to show how this can grow I will show the merging chains
-again.
+again::
 
    E->L4->D->L3->C-+
                    +->L2-+
@@ -184,7 +194,7 @@ the chain (A and B in this example), must have their priorities increased
 to that of G.
 
 Mutex Waiters Tree
------------------
+------------------
 
 Every mutex keeps track of all the waiters that are blocked on itself. The
 mutex has a rbtree to store these waiters by priority.  This tree is protected
@@ -219,19 +229,19 @@ defined.  But is very complex to figure it out, since it depends on all
 the nesting of mutexes.  Let's look at the example where we have 3 mutexes,
 L1, L2, and L3, and four separate functions func1, func2, func3 and func4.
 The following shows a locking order of L1->L2->L3, but may not actually
-be directly nested that way.
+be directly nested that way::
 
-void func1(void)
-{
+  void func1(void)
+  {
 	mutex_lock(L1);
 
 	/* do anything */
 
 	mutex_unlock(L1);
-}
+  }
 
-void func2(void)
-{
+  void func2(void)
+  {
 	mutex_lock(L1);
 	mutex_lock(L2);
 
@@ -239,10 +249,10 @@ void func2(void)
 
 	mutex_unlock(L2);
 	mutex_unlock(L1);
-}
+  }
 
-void func3(void)
-{
+  void func3(void)
+  {
 	mutex_lock(L2);
 	mutex_lock(L3);
 
@@ -250,30 +260,30 @@ void func3(void)
 
 	mutex_unlock(L3);
 	mutex_unlock(L2);
-}
+  }
 
-void func4(void)
-{
+  void func4(void)
+  {
 	mutex_lock(L3);
 
 	/* do something again */
 
 	mutex_unlock(L3);
-}
+  }
 
 Now we add 4 processes that run each of these functions separately.
 Processes A, B, C, and D which run functions func1, func2, func3 and func4
 respectively, and such that D runs first and A last.  With D being preempted
-in func4 in the "do something again" area, we have a locking that follows:
+in func4 in the "do something again" area, we have a locking that follows::
 
-D owns L3
-       C blocked on L3
-       C owns L2
-              B blocked on L2
-              B owns L1
-                     A blocked on L1
+  D owns L3
+         C blocked on L3
+         C owns L2
+                B blocked on L2
+                B owns L1
+                       A blocked on L1
 
-And thus we have the chain A->L1->B->L2->C->L3->D.
+  And thus we have the chain A->L1->B->L2->C->L3->D.
 
 This gives us a PI depth of 4 (four processes), but looking at any of the
 functions individually, it seems as though they only have at most a locking
@@ -298,7 +308,7 @@ not true, the rtmutex.c code will be broken!), this allows for the least
 significant bit to be used as a flag.  Bit 0 is used as the "Has Waiters"
 flag. It's set whenever there are waiters on a mutex.
 
-See Documentation/locking/rt-mutex.txt for further details.
+See Documentation/locking/rt-mutex.rst for further details.
 
 cmpxchg Tricks
 --------------
@@ -307,17 +317,17 @@ Some architectures implement an atomic cmpxchg (Compare and Exchange).  This
 is used (when applicable) to keep the fast path of grabbing and releasing
 mutexes short.
 
-cmpxchg is basically the following function performed atomically:
+cmpxchg is basically the following function performed atomically::
 
-unsigned long _cmpxchg(unsigned long *A, unsigned long *B, unsigned long *C)
-{
+  unsigned long _cmpxchg(unsigned long *A, unsigned long *B, unsigned long *C)
+  {
 	unsigned long T = *A;
 	if (*A == *B) {
 		*A = *C;
 	}
 	return T;
-}
-#define cmpxchg(a,b,c) _cmpxchg(&a,&b,&c)
+  }
+  #define cmpxchg(a,b,c) _cmpxchg(&a,&b,&c)
 
 This is really nice to have, since it allows you to only update a variable
 if the variable is what you expect it to be.  You know if it succeeded if
@@ -352,9 +362,10 @@ Then rt_mutex_setprio is called to adjust the priority of the task to the
 new priority. Note that rt_mutex_setprio is defined in kernel/sched/core.c
 to implement the actual change in priority.
 
-(Note:  For the "prio" field in task_struct, the lower the number, the
+Note:
+	For the "prio" field in task_struct, the lower the number, the
 	higher the priority. A "prio" of 5 is of higher priority than a
-	"prio" of 10.)
+	"prio" of 10.
 
 It is interesting to note that rt_mutex_adjust_prio can either increase
 or decrease the priority of the task.  In the case that a higher priority
@@ -439,6 +450,7 @@ wait_lock, which this code currently holds. So setting the "Has Waiters" flag
 forces the current owner to synchronize with this code.
 
 The lock is taken if the following are true:
+
    1) The lock has no owner
    2) The current task is the highest priority against all other
       waiters of the lock
@@ -546,10 +558,13 @@ Credits
 -------
 
 Author:  Steven Rostedt <rostedt@goodmis.org>
+
 Updated: Alex Shi <alex.shi@linaro.org>	- 7/6/2017
 
-Original Reviewers:  Ingo Molnar, Thomas Gleixner, Thomas Duetsch, and
+Original Reviewers:
+		     Ingo Molnar, Thomas Gleixner, Thomas Duetsch, and
 		     Randy Dunlap
+
 Update (7/6/2017) Reviewers: Steven Rostedt and Sebastian Siewior
 
 Updates
diff --git a/Documentation/locking/rt-mutex.txt b/Documentation/locking/rt-mutex.rst
similarity index 71%
rename from Documentation/locking/rt-mutex.txt
rename to Documentation/locking/rt-mutex.rst
index 35793e003041..c365dc302081 100644
--- a/Documentation/locking/rt-mutex.txt
+++ b/Documentation/locking/rt-mutex.rst
@@ -1,5 +1,6 @@
+==================================
 RT-mutex subsystem with PI support
-----------------------------------
+==================================
 
 RT-mutexes with priority inheritance are used to support PI-futexes,
 which enable pthread_mutex_t priority inheritance attributes
@@ -46,27 +47,30 @@ The state of the rt-mutex is tracked via the owner field of the rt-mutex
 structure:
 
 lock->owner holds the task_struct pointer of the owner. Bit 0 is used to
-keep track of the "lock has waiters" state.
+keep track of the "lock has waiters" state:
 
- owner        bit0
+ ============ ======= ================================================
+ owner        bit0    Notes
+ ============ ======= ================================================
  NULL         0       lock is free (fast acquire possible)
  NULL         1       lock is free and has waiters and the top waiter
-			is going to take the lock*
+		      is going to take the lock [1]_
  taskpointer  0       lock is held (fast release possible)
- taskpointer  1       lock is held and has waiters**
+ taskpointer  1       lock is held and has waiters [2]_
+ ============ ======= ================================================
 
 The fast atomic compare exchange based acquire and release is only
 possible when bit 0 of lock->owner is 0.
 
-(*) It also can be a transitional state when grabbing the lock
-with ->wait_lock is held. To prevent any fast path cmpxchg to the lock,
-we need to set the bit0 before looking at the lock, and the owner may be
-NULL in this small time, hence this can be a transitional state.
+.. [1] It also can be a transitional state when grabbing the lock
+       with ->wait_lock is held. To prevent any fast path cmpxchg to the lock,
+       we need to set the bit0 before looking at the lock, and the owner may
+       be NULL in this small time, hence this can be a transitional state.
 
-(**) There is a small time when bit 0 is set but there are no
-waiters. This can happen when grabbing the lock in the slow path.
-To prevent a cmpxchg of the owner releasing the lock, we need to
-set this bit before looking at the lock.
+.. [2] There is a small time when bit 0 is set but there are no
+       waiters. This can happen when grabbing the lock in the slow path.
+       To prevent a cmpxchg of the owner releasing the lock, we need to
+       set this bit before looking at the lock.
 
 BTW, there is still technically a "Pending Owner", it's just not called
 that anymore. The pending owner happens to be the top_waiter of a lock
diff --git a/Documentation/locking/spinlocks.txt b/Documentation/locking/spinlocks.rst
similarity index 89%
rename from Documentation/locking/spinlocks.txt
rename to Documentation/locking/spinlocks.rst
index ff35e40bdf5b..098107fb7d86 100644
--- a/Documentation/locking/spinlocks.txt
+++ b/Documentation/locking/spinlocks.rst
@@ -1,8 +1,13 @@
+===============
+Locking lessons
+===============
+
 Lesson 1: Spin locks
+====================
 
-The most basic primitive for locking is spinlock.
+The most basic primitive for locking is spinlock::
 
-static DEFINE_SPINLOCK(xxx_lock);
+  static DEFINE_SPINLOCK(xxx_lock);
 
 	unsigned long flags;
 
@@ -19,23 +24,25 @@ worry about UP vs SMP issues: the spinlocks work correctly under both.
    NOTE! Implications of spin_locks for memory are further described in:
 
      Documentation/memory-barriers.txt
+
        (5) LOCK operations.
+
        (6) UNLOCK operations.
 
 The above is usually pretty simple (you usually need and want only one
 spinlock for most things - using more than one spinlock can make things a
 lot more complex and even slower and is usually worth it only for
-sequences that you _know_ need to be split up: avoid it at all cost if you
+sequences that you **know** need to be split up: avoid it at all cost if you
 aren't sure).
 
 This is really the only really hard part about spinlocks: once you start
 using spinlocks they tend to expand to areas you might not have noticed
 before, because you have to make sure the spinlocks correctly protect the
-shared data structures _everywhere_ they are used. The spinlocks are most
+shared data structures **everywhere** they are used. The spinlocks are most
 easily added to places that are completely independent of other code (for
 example, internal driver data structures that nobody else ever touches).
 
-   NOTE! The spin-lock is safe only when you _also_ use the lock itself
+   NOTE! The spin-lock is safe only when you **also** use the lock itself
    to do locking across CPU's, which implies that EVERYTHING that
    touches a shared variable has to agree about the spinlock they want
    to use.
@@ -43,6 +50,7 @@ example, internal driver data structures that nobody else ever touches).
 ----
 
 Lesson 2: reader-writer spinlocks.
+==================================
 
 If your data accesses have a very natural pattern where you usually tend
 to mostly read from the shared variables, the reader-writer locks
@@ -54,7 +62,7 @@ to change the variables it has to get an exclusive write lock.
    simple spinlocks.  Unless the reader critical section is long, you
    are better off just using spinlocks.
 
-The routines look the same as above:
+The routines look the same as above::
 
    rwlock_t xxx_lock = __RW_LOCK_UNLOCKED(xxx_lock);
 
@@ -71,7 +79,7 @@ The routines look the same as above:
 The above kind of lock may be useful for complex data structures like
 linked lists, especially searching for entries without changing the list
 itself.  The read lock allows many concurrent readers.  Anything that
-_changes_ the list will have to get the write lock.
+**changes** the list will have to get the write lock.
 
    NOTE! RCU is better for list traversal, but requires careful
    attention to design detail (see Documentation/RCU/listRCU.txt).
@@ -87,10 +95,11 @@ to get the write-lock at the very beginning.
 ----
 
 Lesson 3: spinlocks revisited.
+==============================
 
 The single spin-lock primitives above are by no means the only ones. They
 are the most safe ones, and the ones that work under all circumstances,
-but partly _because_ they are safe they are also fairly slow. They are slower
+but partly **because** they are safe they are also fairly slow. They are slower
 than they'd need to be, because they do have to disable interrupts
 (which is just a single instruction on a x86, but it's an expensive one -
 and on other architectures it can be worse).
@@ -98,7 +107,7 @@ and on other architectures it can be worse).
 If you have a case where you have to protect a data structure across
 several CPU's and you want to use spinlocks you can potentially use
 cheaper versions of the spinlocks. IFF you know that the spinlocks are
-never used in interrupt handlers, you can use the non-irq versions:
+never used in interrupt handlers, you can use the non-irq versions::
 
 	spin_lock(&lock);
 	...
@@ -110,7 +119,7 @@ This is useful if you know that the data in question is only ever
 manipulated from a "process context", ie no interrupts involved.
 
 The reasons you mustn't use these versions if you have interrupts that
-play with the spinlock is that you can get deadlocks:
+play with the spinlock is that you can get deadlocks::
 
 	spin_lock(&lock);
 	...
@@ -147,9 +156,10 @@ indeed), while write-locks need to protect themselves against interrupts.
 ----
 
 Reference information:
+======================
 
 For dynamic initialization, use spin_lock_init() or rwlock_init() as
-appropriate:
+appropriate::
 
    spinlock_t xxx_lock;
    rwlock_t xxx_rw_lock;
diff --git a/Documentation/locking/ww-mutex-design.txt b/Documentation/locking/ww-mutex-design.rst
similarity index 93%
rename from Documentation/locking/ww-mutex-design.txt
rename to Documentation/locking/ww-mutex-design.rst
index f0ed7c30e695..1846c199da23 100644
--- a/Documentation/locking/ww-mutex-design.txt
+++ b/Documentation/locking/ww-mutex-design.rst
@@ -1,3 +1,4 @@
+======================================
 Wound/Wait Deadlock-Proof Mutex Design
 ======================================
 
@@ -85,6 +86,7 @@ Furthermore there are three different class of w/w lock acquire functions:
   no deadlock potential and hence the ww_mutex_lock call will block and not
   prematurely return -EDEADLK. The advantage of the _slow functions is in
   interface safety:
+
   - ww_mutex_lock has a __must_check int return type, whereas ww_mutex_lock_slow
     has a void return type. Note that since ww mutex code needs loops/retries
     anyway the __must_check doesn't result in spurious warnings, even though the
@@ -115,36 +117,36 @@ expect the number of simultaneous competing transactions to be typically small,
 and you want to reduce the number of rollbacks.
 
 Three different ways to acquire locks within the same w/w class. Common
-definitions for methods #1 and #2:
+definitions for methods #1 and #2::
 
-static DEFINE_WW_CLASS(ww_class);
+  static DEFINE_WW_CLASS(ww_class);
 
-struct obj {
+  struct obj {
 	struct ww_mutex lock;
 	/* obj data */
-};
+  };
 
-struct obj_entry {
+  struct obj_entry {
 	struct list_head head;
 	struct obj *obj;
-};
+  };
 
 Method 1, using a list in execbuf->buffers that's not allowed to be reordered.
 This is useful if a list of required objects is already tracked somewhere.
 Furthermore the lock helper can use propagate the -EALREADY return code back to
 the caller as a signal that an object is twice on the list. This is useful if
 the list is constructed from userspace input and the ABI requires userspace to
-not have duplicate entries (e.g. for a gpu commandbuffer submission ioctl).
+not have duplicate entries (e.g. for a gpu commandbuffer submission ioctl)::
 
-int lock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
-{
+  int lock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
+  {
 	struct obj *res_obj = NULL;
 	struct obj_entry *contended_entry = NULL;
 	struct obj_entry *entry;
 
 	ww_acquire_init(ctx, &ww_class);
 
-retry:
+  retry:
 	list_for_each_entry (entry, list, head) {
 		if (entry->obj == res_obj) {
 			res_obj = NULL;
@@ -160,7 +162,7 @@ retry:
 	ww_acquire_done(ctx);
 	return 0;
 
-err:
+  err:
 	list_for_each_entry_continue_reverse (entry, list, head)
 		ww_mutex_unlock(&entry->obj->lock);
 
@@ -176,14 +178,14 @@ err:
 	ww_acquire_fini(ctx);
 
 	return ret;
-}
+  }
 
 Method 2, using a list in execbuf->buffers that can be reordered. Same semantics
 of duplicate entry detection using -EALREADY as method 1 above. But the
-list-reordering allows for a bit more idiomatic code.
+list-reordering allows for a bit more idiomatic code::
 
-int lock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
-{
+  int lock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
+  {
 	struct obj_entry *entry, *entry2;
 
 	ww_acquire_init(ctx, &ww_class);
@@ -216,24 +218,25 @@ int lock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
 
 	ww_acquire_done(ctx);
 	return 0;
-}
+  }
 
-Unlocking works the same way for both methods #1 and #2:
+Unlocking works the same way for both methods #1 and #2::
 
-void unlock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
-{
+  void unlock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
+  {
 	struct obj_entry *entry;
 
 	list_for_each_entry (entry, list, head)
 		ww_mutex_unlock(&entry->obj->lock);
 
 	ww_acquire_fini(ctx);
-}
+  }
 
 Method 3 is useful if the list of objects is constructed ad-hoc and not upfront,
 e.g. when adjusting edges in a graph where each node has its own ww_mutex lock,
 and edges can only be changed when holding the locks of all involved nodes. w/w
 mutexes are a natural fit for such a case for two reasons:
+
 - They can handle lock-acquisition in any order which allows us to start walking
   a graph from a starting point and then iteratively discovering new edges and
   locking down the nodes those edges connect to.
@@ -243,6 +246,7 @@ mutexes are a natural fit for such a case for two reasons:
   as a starting point).
 
 Note that this approach differs in two important ways from the above methods:
+
 - Since the list of objects is dynamically constructed (and might very well be
   different when retrying due to hitting the -EDEADLK die condition) there's
   no need to keep any object on a persistent list when it's not locked. We can
@@ -260,17 +264,17 @@ any interface misuse for these cases.
 
 Also, method 3 can't fail the lock acquisition step since it doesn't return
 -EALREADY. Of course this would be different when using the _interruptible
-variants, but that's outside of the scope of these examples here.
+variants, but that's outside of the scope of these examples here::
 
-struct obj {
+  struct obj {
 	struct ww_mutex ww_mutex;
 	struct list_head locked_list;
-};
+  };
 
-static DEFINE_WW_CLASS(ww_class);
+  static DEFINE_WW_CLASS(ww_class);
 
-void __unlock_objs(struct list_head *list)
-{
+  void __unlock_objs(struct list_head *list)
+  {
 	struct obj *entry, *temp;
 
 	list_for_each_entry_safe (entry, temp, list, locked_list) {
@@ -279,15 +283,15 @@ void __unlock_objs(struct list_head *list)
 		list_del(&entry->locked_list);
 		ww_mutex_unlock(entry->ww_mutex)
 	}
-}
+  }
 
-void lock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
-{
+  void lock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
+  {
 	struct obj *obj;
 
 	ww_acquire_init(ctx, &ww_class);
 
-retry:
+  retry:
 	/* re-init loop start state */
 	loop {
 		/* magic code which walks over a graph and decides which objects
@@ -312,13 +316,13 @@ retry:
 
 	ww_acquire_done(ctx);
 	return 0;
-}
+  }
 
-void unlock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
-{
+  void unlock_objs(struct list_head *list, struct ww_acquire_ctx *ctx)
+  {
 	__unlock_objs(list);
 	ww_acquire_fini(ctx);
-}
+  }
 
 Method 4: Only lock one single objects. In that case deadlock detection and
 prevention is obviously overkill, since with grabbing just one lock you can't
@@ -329,11 +333,14 @@ Implementation Details
 ----------------------
 
 Design:
+^^^^^^^
+
   ww_mutex currently encapsulates a struct mutex, this means no extra overhead for
   normal mutex locks, which are far more common. As such there is only a small
   increase in code size if wait/wound mutexes are not used.
 
   We maintain the following invariants for the wait list:
+
   (1) Waiters with an acquire context are sorted by stamp order; waiters
       without an acquire context are interspersed in FIFO order.
   (2) For Wait-Die, among waiters with contexts, only the first one can have
@@ -355,6 +362,8 @@ Design:
   therefore be directed towards the uncontended cases.
 
 Lockdep:
+^^^^^^^^
+
   Special care has been taken to warn for as many cases of api abuse
   as possible. Some common api abuses will be caught with
   CONFIG_DEBUG_MUTEXES, but CONFIG_PROVE_LOCKING is recommended.
@@ -379,5 +388,6 @@ Lockdep:
      having called ww_acquire_fini on the first.
    - 'normal' deadlocks that can occur.
 
-FIXME: Update this section once we have the TASK_DEADLOCK task state flag magic
-implemented.
+FIXME:
+  Update this section once we have the TASK_DEADLOCK task state flag magic
+  implemented.
diff --git a/Documentation/pi-futex.txt b/Documentation/pi-futex.txt
index b154f6c0c36e..c33ba2befbf8 100644
--- a/Documentation/pi-futex.txt
+++ b/Documentation/pi-futex.txt
@@ -119,4 +119,4 @@ properties of futexes, and all four combinations are possible: futex,
 robust-futex, PI-futex, robust+PI-futex.
 
 More details about priority inheritance can be found in
-Documentation/locking/rt-mutex.txt.
+Documentation/locking/rt-mutex.rst.
diff --git a/Documentation/translations/it_IT/kernel-hacking/locking.rst b/Documentation/translations/it_IT/kernel-hacking/locking.rst
index 0ef31666663b..75d9b86fcc50 100644
--- a/Documentation/translations/it_IT/kernel-hacking/locking.rst
+++ b/Documentation/translations/it_IT/kernel-hacking/locking.rst
@@ -1404,7 +1404,7 @@ Riferimento per l'API dei Futex
 Approfondimenti
 ===============
 
--  ``Documentation/locking/spinlocks.txt``: la guida di Linus Torvalds agli
+-  ``Documentation/locking/spinlocks.rst``: la guida di Linus Torvalds agli
    spinlock del kernel.
 
 -  Unix Systems for Modern Architectures: Symmetric Multiprocessing and
diff --git a/drivers/gpu/drm/drm_modeset_lock.c b/drivers/gpu/drm/drm_modeset_lock.c
index 81dd11901ffd..cb5671d32ada 100644
--- a/drivers/gpu/drm/drm_modeset_lock.c
+++ b/drivers/gpu/drm/drm_modeset_lock.c
@@ -36,7 +36,7 @@
  * of extra utility/tracking out of our acquire-ctx.  This is provided
  * by &struct drm_modeset_lock and &struct drm_modeset_acquire_ctx.
  *
- * For basic principles of &ww_mutex, see: Documentation/locking/ww-mutex-design.txt
+ * For basic principles of &ww_mutex, see: Documentation/locking/ww-mutex-design.rst
  *
  * The basic usage pattern is to::
  *
diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h
index 79c3873d58ac..4c6296aaeefb 100644
--- a/include/linux/lockdep.h
+++ b/include/linux/lockdep.h
@@ -5,7 +5,7 @@
  *  Copyright (C) 2006,2007 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
  *  Copyright (C) 2007 Red Hat, Inc., Peter Zijlstra
  *
- * see Documentation/locking/lockdep-design.txt for more details.
+ * see Documentation/locking/lockdep-design.rst for more details.
  */
 #ifndef __LINUX_LOCKDEP_H
 #define __LINUX_LOCKDEP_H
diff --git a/include/linux/mutex.h b/include/linux/mutex.h
index 3093dd162424..dcd03fee6e01 100644
--- a/include/linux/mutex.h
+++ b/include/linux/mutex.h
@@ -151,7 +151,7 @@ static inline bool mutex_is_locked(struct mutex *lock)
 
 /*
  * See kernel/locking/mutex.c for detailed documentation of these APIs.
- * Also see Documentation/locking/mutex-design.txt.
+ * Also see Documentation/locking/mutex-design.rst.
  */
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 extern void mutex_lock_nested(struct mutex *lock, unsigned int subclass);
diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h
index 2ea18a3def04..61a084ae17ac 100644
--- a/include/linux/rwsem.h
+++ b/include/linux/rwsem.h
@@ -158,7 +158,7 @@ extern void downgrade_write(struct rw_semaphore *sem);
  * static then another method for expressing nested locking is
  * the explicit definition of lock class keys and the use of
  * lockdep_set_class() at lock initialization time.
- * See Documentation/locking/lockdep-design.txt for more details.)
+ * See Documentation/locking/lockdep-design.rst for more details.)
  */
 extern void down_read_nested(struct rw_semaphore *sem, int subclass);
 extern void down_write_nested(struct rw_semaphore *sem, int subclass);
diff --git a/kernel/locking/mutex.c b/kernel/locking/mutex.c
index db578783dd36..5ec20b3cdbe5 100644
--- a/kernel/locking/mutex.c
+++ b/kernel/locking/mutex.c
@@ -15,7 +15,7 @@
  *    by Steven Rostedt, based on work by Gregory Haskins, Peter Morreale
  *    and Sven Dietrich.
  *
- * Also see Documentation/locking/mutex-design.txt.
+ * Also see Documentation/locking/mutex-design.rst.
  */
 #include <linux/mutex.h>
 #include <linux/ww_mutex.h>
diff --git a/kernel/locking/rtmutex.c b/kernel/locking/rtmutex.c
index 978d63a8261c..8630bb99eec7 100644
--- a/kernel/locking/rtmutex.c
+++ b/kernel/locking/rtmutex.c
@@ -8,7 +8,7 @@
  *  Copyright (C) 2005 Kihon Technologies Inc., Steven Rostedt
  *  Copyright (C) 2006 Esben Nielsen
  *
- *  See Documentation/locking/rt-mutex-design.txt for details.
+ *  See Documentation/locking/rt-mutex-design.rst for details.
  */
 #include <linux/spinlock.h>
 #include <linux/export.h>
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 1b0129196e70..aa05f47f5762 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1112,7 +1112,7 @@ config PROVE_LOCKING
 	 the proof of observed correctness is also maintained for an
 	 arbitrary combination of these separate locking variants.
 
-	 For more details, see Documentation/locking/lockdep-design.txt.
+	 For more details, see Documentation/locking/lockdep-design.rst.
 
 config LOCK_STAT
 	bool "Lock usage statistics"
@@ -1126,7 +1126,7 @@ config LOCK_STAT
 	help
 	 This feature enables tracking lock contention points
 
-	 For more details, see Documentation/locking/lockstat.txt
+	 For more details, see Documentation/locking/lockstat.rst
 
 	 This also enables lock events required by "perf lock",
 	 subcommand of perf.
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 22/79] docs: mic: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (19 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 21/79] docs: locking: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 23/79] docs: netlabel: " Mauro Carvalho Chehab
                     ` (56 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Sudeep Dutt, Ashutosh Dixit

Convert Intel Many Integrated Core architecture docs to ReST.

The conversion is trivial: just add title and literal block
markups, and adjust some identation.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/mic/index.rst                   | 18 ++++++
 .../{mic_overview.txt => mic_overview.rst}    |  6 +-
 .../{scif_overview.txt => scif_overview.rst}  | 58 +++++++++++--------
 3 files changed, 57 insertions(+), 25 deletions(-)
 create mode 100644 Documentation/mic/index.rst
 rename Documentation/mic/{mic_overview.txt => mic_overview.rst} (96%)
 rename Documentation/mic/{scif_overview.txt => scif_overview.rst} (76%)

diff --git a/Documentation/mic/index.rst b/Documentation/mic/index.rst
new file mode 100644
index 000000000000..082fa8f6a260
--- /dev/null
+++ b/Documentation/mic/index.rst
@@ -0,0 +1,18 @@
+:orphan:
+
+=============================================
+Intel Many Integrated Core (MIC) architecture
+=============================================
+
+.. toctree::
+    :maxdepth: 1
+
+    mic_overview
+    scif_overview
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/mic/mic_overview.txt b/Documentation/mic/mic_overview.rst
similarity index 96%
rename from Documentation/mic/mic_overview.txt
rename to Documentation/mic/mic_overview.rst
index 074adbdf83a4..17d956bdaf7c 100644
--- a/Documentation/mic/mic_overview.txt
+++ b/Documentation/mic/mic_overview.rst
@@ -1,3 +1,7 @@
+======================================================
+Intel Many Integrated Core (MIC) architecture overview
+======================================================
+
 An Intel MIC X100 device is a PCIe form factor add-in coprocessor
 card based on the Intel Many Integrated Core (MIC) architecture
 that runs a Linux OS. It is a PCIe endpoint in a platform and therefore
@@ -45,7 +49,7 @@ Here is a block diagram of the various components described above. The
 virtio backends are situated on the host rather than the card given better
 single threaded performance for the host compared to MIC, the ability of
 the host to initiate DMA's to/from the card using the MIC DMA engine and
-the fact that the virtio block storage backend can only be on the host.
+the fact that the virtio block storage backend can only be on the host::
 
                +----------+           |             +----------+
                | Card OS  |           |             | Host OS  |
diff --git a/Documentation/mic/scif_overview.txt b/Documentation/mic/scif_overview.rst
similarity index 76%
rename from Documentation/mic/scif_overview.txt
rename to Documentation/mic/scif_overview.rst
index 0a280d986731..4c8ad9e43706 100644
--- a/Documentation/mic/scif_overview.txt
+++ b/Documentation/mic/scif_overview.rst
@@ -1,3 +1,7 @@
+========================================
+Symmetric Communication Interface (SCIF)
+========================================
+
 The Symmetric Communication Interface (SCIF (pronounced as skiff)) is a low
 level communications API across PCIe currently implemented for MIC. Currently
 SCIF provides inter-node communication within a single host platform, where a
@@ -8,8 +12,11 @@ is to deliver the maximum possible performance given the communication
 abilities of the hardware. SCIF has been used to implement an offload compiler
 runtime and OFED support for MPI implementations for MIC coprocessors.
 
-==== SCIF API Components ====
+SCIF API Components
+===================
+
 The SCIF API has the following parts:
+
 1. Connection establishment using a client server model
 2. Byte stream messaging intended for short messages
 3. Node enumeration to determine online nodes
@@ -28,9 +35,12 @@ can also register local memory which is followed by data transfer using either
 DMA, CPU copies or remote memory mapping via mmap. SCIF supports both user and
 kernel mode clients which are functionally equivalent.
 
-==== SCIF Performance for MIC ====
+SCIF Performance for MIC
+========================
+
 DMA bandwidth comparison between the TCP (over ethernet over PCIe) stack versus
-SCIF shows the performance advantages of SCIF for HPC applications and runtimes.
+SCIF shows the performance advantages of SCIF for HPC applications and
+runtimes::
 
              Comparison of TCP and SCIF based BW
 
@@ -66,33 +76,33 @@ space API similar to the kernel API in scif.h. The SCIF user space library
 is distributed @ https://software.intel.com/en-us/mic-developer
 
 Here is some pseudo code for an example of how two applications on two PCIe
-nodes would typically use the SCIF API:
+nodes would typically use the SCIF API::
 
-Process A (on node A)			Process B (on node B)
+  Process A (on node A)			Process B (on node B)
 
-/* get online node information */
-scif_get_node_ids(..)			scif_get_node_ids(..)
-scif_open(..)				scif_open(..)
-scif_bind(..)				scif_bind(..)
-scif_listen(..)
-scif_accept(..)				scif_connect(..)
-/* SCIF connection established */
+  /* get online node information */
+  scif_get_node_ids(..)			scif_get_node_ids(..)
+  scif_open(..)				scif_open(..)
+  scif_bind(..)				scif_bind(..)
+  scif_listen(..)
+  scif_accept(..)				scif_connect(..)
+  /* SCIF connection established */
 
-/* Send and receive short messages */
-scif_send(..)/scif_recv(..)		scif_send(..)/scif_recv(..)
+  /* Send and receive short messages */
+  scif_send(..)/scif_recv(..)		scif_send(..)/scif_recv(..)
 
-/* Register memory */
-scif_register(..)			scif_register(..)
+  /* Register memory */
+  scif_register(..)			scif_register(..)
 
-/* RDMA */
-scif_readfrom(..)/scif_writeto(..)	scif_readfrom(..)/scif_writeto(..)
+  /* RDMA */
+  scif_readfrom(..)/scif_writeto(..)	scif_readfrom(..)/scif_writeto(..)
 
-/* Fence DMAs */
-scif_fence_signal(..)			scif_fence_signal(..)
+  /* Fence DMAs */
+  scif_fence_signal(..)			scif_fence_signal(..)
 
-mmap(..)				mmap(..)
+  mmap(..)				mmap(..)
 
-/* Access remote registered memory */
+  /* Access remote registered memory */
 
-/* Close the endpoints */
-scif_close(..)				scif_close(..)
+  /* Close the endpoints */
+  scif_close(..)				scif_close(..)
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 23/79] docs: netlabel: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (20 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 22/79] docs: mic: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 18:10     ` Paul Moore
  2019-04-22 13:27   ` [PATCH v2 24/79] docs: pcmcia: " Mauro Carvalho Chehab
                     ` (55 subsequent siblings)
  77 siblings, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Paul Moore, netdev, linux-security-module

Convert netlabel documentation to ReST.

This was trivial: just add proper title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../{cipso_ipv4.txt => cipso_ipv4.rst}        | 19 +++++++++++------
 Documentation/netlabel/draft_ietf.rst         |  5 +++++
 Documentation/netlabel/index.rst              | 21 +++++++++++++++++++
 .../{introduction.txt => introduction.rst}    | 16 +++++++++-----
 .../{lsm_interface.txt => lsm_interface.rst}  | 16 +++++++++-----
 5 files changed, 61 insertions(+), 16 deletions(-)
 rename Documentation/netlabel/{cipso_ipv4.txt => cipso_ipv4.rst} (87%)
 create mode 100644 Documentation/netlabel/draft_ietf.rst
 create mode 100644 Documentation/netlabel/index.rst
 rename Documentation/netlabel/{introduction.txt => introduction.rst} (91%)
 rename Documentation/netlabel/{lsm_interface.txt => lsm_interface.rst} (88%)

diff --git a/Documentation/netlabel/cipso_ipv4.txt b/Documentation/netlabel/cipso_ipv4.rst
similarity index 87%
rename from Documentation/netlabel/cipso_ipv4.txt
rename to Documentation/netlabel/cipso_ipv4.rst
index a6075481fd60..cbd3f3231221 100644
--- a/Documentation/netlabel/cipso_ipv4.txt
+++ b/Documentation/netlabel/cipso_ipv4.rst
@@ -1,10 +1,13 @@
+===================================
 NetLabel CIPSO/IPv4 Protocol Engine
-==============================================================================
+===================================
+
 Paul Moore, paul.moore@hp.com
 
 May 17, 2006
 
- * Overview
+Overview
+========
 
 The NetLabel CIPSO/IPv4 protocol engine is based on the IETF Commercial
 IP Security Option (CIPSO) draft from July 16, 1992.  A copy of this
@@ -13,7 +16,8 @@ draft can be found in this directory
 it to an RFC standard it has become a de-facto standard for labeled
 networking and is used in many trusted operating systems.
 
- * Outbound Packet Processing
+Outbound Packet Processing
+==========================
 
 The CIPSO/IPv4 protocol engine applies the CIPSO IP option to packets by
 adding the CIPSO label to the socket.  This causes all packets leaving the
@@ -24,7 +28,8 @@ label by using the NetLabel security module API; if the NetLabel "domain" is
 configured to use CIPSO for packet labeling then a CIPSO IP option will be
 generated and attached to the socket.
 
- * Inbound Packet Processing
+Inbound Packet Processing
+=========================
 
 The CIPSO/IPv4 protocol engine validates every CIPSO IP option it finds at the
 IP layer without any special handling required by the LSM.  However, in order
@@ -33,7 +38,8 @@ NetLabel security module API to extract the security attributes of the packet.
 This is typically done at the socket layer using the 'socket_sock_rcv_skb()'
 LSM hook.
 
- * Label Translation
+Label Translation
+=================
 
 The CIPSO/IPv4 protocol engine contains a mechanism to translate CIPSO security
 attributes such as sensitivity level and category to values which are
@@ -42,7 +48,8 @@ Domain Of Interpretation (DOI) definition and are configured through the
 NetLabel user space communication layer.  Each DOI definition can have a
 different security attribute mapping table.
 
- * Label Translation Cache
+Label Translation Cache
+=======================
 
 The NetLabel system provides a framework for caching security attribute
 mappings from the network labels to the corresponding LSM identifiers.  The
diff --git a/Documentation/netlabel/draft_ietf.rst b/Documentation/netlabel/draft_ietf.rst
new file mode 100644
index 000000000000..5ed39ab8234b
--- /dev/null
+++ b/Documentation/netlabel/draft_ietf.rst
@@ -0,0 +1,5 @@
+Draft IETF CIPSO IP Security
+----------------------------
+
+ .. include:: draft-ietf-cipso-ipsecurity-01.txt
+    :literal:
diff --git a/Documentation/netlabel/index.rst b/Documentation/netlabel/index.rst
new file mode 100644
index 000000000000..47f1e0e5acd1
--- /dev/null
+++ b/Documentation/netlabel/index.rst
@@ -0,0 +1,21 @@
+:orphan:
+
+========
+NetLabel
+========
+
+.. toctree::
+    :maxdepth: 1
+
+    introduction
+    cipso_ipv4
+    lsm_interface
+
+    draft_ietf
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/netlabel/introduction.txt b/Documentation/netlabel/introduction.rst
similarity index 91%
rename from Documentation/netlabel/introduction.txt
rename to Documentation/netlabel/introduction.rst
index 3caf77bcff0f..9333bbb0adc1 100644
--- a/Documentation/netlabel/introduction.txt
+++ b/Documentation/netlabel/introduction.rst
@@ -1,10 +1,13 @@
+=====================
 NetLabel Introduction
-==============================================================================
+=====================
+
 Paul Moore, paul.moore@hp.com
 
 August 2, 2006
 
- * Overview
+Overview
+========
 
 NetLabel is a mechanism which can be used by kernel security modules to attach
 security attributes to outgoing network packets generated from user space
@@ -12,7 +15,8 @@ applications and read security attributes from incoming network packets.  It
 is composed of three main components, the protocol engines, the communication
 layer, and the kernel security module API.
 
- * Protocol Engines
+Protocol Engines
+================
 
 The protocol engines are responsible for both applying and retrieving the
 network packet's security attributes.  If any translation between the network
@@ -24,7 +28,8 @@ the NetLabel kernel security module API described below.
 Detailed information about each NetLabel protocol engine can be found in this
 directory.
 
- * Communication Layer
+Communication Layer
+===================
 
 The communication layer exists to allow NetLabel configuration and monitoring
 from user space.  The NetLabel communication layer uses a message based
@@ -33,7 +38,8 @@ formatting of these NetLabel messages as well as the Generic NETLINK family
 names can be found in the 'net/netlabel/' directory as comments in the
 header files as well as in 'include/net/netlabel.h'.
 
- * Security Module API
+Security Module API
+===================
 
 The purpose of the NetLabel security module API is to provide a protocol
 independent interface to the underlying NetLabel protocol engines.  In addition
diff --git a/Documentation/netlabel/lsm_interface.txt b/Documentation/netlabel/lsm_interface.rst
similarity index 88%
rename from Documentation/netlabel/lsm_interface.txt
rename to Documentation/netlabel/lsm_interface.rst
index 638c74f7de7f..026fc267f798 100644
--- a/Documentation/netlabel/lsm_interface.txt
+++ b/Documentation/netlabel/lsm_interface.rst
@@ -1,10 +1,13 @@
+========================================
 NetLabel Linux Security Module Interface
-==============================================================================
+========================================
+
 Paul Moore, paul.moore@hp.com
 
 May 17, 2006
 
- * Overview
+Overview
+========
 
 NetLabel is a mechanism which can set and retrieve security attributes from
 network packets.  It is intended to be used by LSM developers who want to make
@@ -12,7 +15,8 @@ use of a common code base for several different packet labeling protocols.
 The NetLabel security module API is defined in 'include/net/netlabel.h' but a
 brief overview is given below.
 
- * NetLabel Security Attributes
+NetLabel Security Attributes
+============================
 
 Since NetLabel supports multiple different packet labeling protocols and LSMs
 it uses the concept of security attributes to refer to the packet's security
@@ -24,7 +28,8 @@ configuration.  It is up to the LSM developer to translate the NetLabel
 security attributes into whatever security identifiers are in use for their
 particular LSM.
 
- * NetLabel LSM Protocol Operations
+NetLabel LSM Protocol Operations
+================================
 
 These are the functions which allow the LSM developer to manipulate the labels
 on outgoing packets as well as read the labels on incoming packets.  Functions
@@ -32,7 +37,8 @@ exist to operate both on sockets as well as the sk_buffs directly.  These high
 level functions are translated into low level protocol operations based on how
 the administrator has configured the NetLabel subsystem.
 
- * NetLabel Label Mapping Cache Operations
+NetLabel Label Mapping Cache Operations
+=======================================
 
 Depending on the exact configuration, translation between the network packet
 label and the internal LSM security identifier can be time consuming.  The
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 24/79] docs: pcmcia: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (21 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 23/79] docs: netlabel: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 25/79] docs: " Mauro Carvalho Chehab
                     ` (54 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Dominik Brodowski

Convert the pcmcia docs to ReST format. Most of the changes here
are trivial.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../{devicetable.txt => devicetable.rst}      |  4 ++
 ...{driver-changes.txt => driver-changes.rst} | 35 +++++++++++------
 .../pcmcia/{driver.txt => driver.rst}         | 18 ++++-----
 Documentation/pcmcia/index.rst                | 20 ++++++++++
 .../pcmcia/{locking.txt => locking.rst}       | 39 +++++++++++++------
 drivers/pcmcia/ds.c                           |  2 +-
 include/pcmcia/ds.h                           |  2 +-
 include/pcmcia/ss.h                           |  2 +-
 8 files changed, 86 insertions(+), 36 deletions(-)
 rename Documentation/pcmcia/{devicetable.txt => devicetable.rst} (97%)
 rename Documentation/pcmcia/{driver-changes.txt => driver-changes.rst} (90%)
 rename Documentation/pcmcia/{driver.txt => driver.rst} (66%)
 create mode 100644 Documentation/pcmcia/index.rst
 rename Documentation/pcmcia/{locking.txt => locking.rst} (81%)

diff --git a/Documentation/pcmcia/devicetable.txt b/Documentation/pcmcia/devicetable.rst
similarity index 97%
rename from Documentation/pcmcia/devicetable.txt
rename to Documentation/pcmcia/devicetable.rst
index 5f3e00ab54c4..fd1d60d12ca1 100644
--- a/Documentation/pcmcia/devicetable.txt
+++ b/Documentation/pcmcia/devicetable.rst
@@ -1,3 +1,7 @@
+============
+Device table
+============
+
 Matching of PCMCIA devices to drivers is done using one or more of the
 following criteria:
 
diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.rst
similarity index 90%
rename from Documentation/pcmcia/driver-changes.txt
rename to Documentation/pcmcia/driver-changes.rst
index 78355c4c268a..33fe9ebec049 100644
--- a/Documentation/pcmcia/driver-changes.txt
+++ b/Documentation/pcmcia/driver-changes.rst
@@ -1,15 +1,21 @@
+==============
+Driver changes
+==============
+
 This file details changes in 2.6 which affect PCMCIA card driver authors:
+
 * pcmcia_loop_config() and autoconfiguration (as of 2.6.36)
-   If struct pcmcia_device *p_dev->config_flags is set accordingly,
+   If `struct pcmcia_device *p_dev->config_flags` is set accordingly,
    pcmcia_loop_config() now sets up certain configuration values
    automatically, though the driver may still override the settings
    in the callback function. The following autoconfiguration options
    are provided at the moment:
-	CONF_AUTO_CHECK_VCC : check for matching Vcc
-	CONF_AUTO_SET_VPP   : set Vpp
-	CONF_AUTO_AUDIO     : auto-enable audio line, if required
-	CONF_AUTO_SET_IO    : set ioport resources (->resource[0,1])
-	CONF_AUTO_SET_IOMEM : set first iomem resource (->resource[2])
+
+	- CONF_AUTO_CHECK_VCC : check for matching Vcc
+	- CONF_AUTO_SET_VPP   : set Vpp
+	- CONF_AUTO_AUDIO     : auto-enable audio line, if required
+	- CONF_AUTO_SET_IO    : set ioport resources (->resource[0,1])
+	- CONF_AUTO_SET_IOMEM : set first iomem resource (->resource[2])
 
 * pcmcia_request_configuration -> pcmcia_enable_device (as of 2.6.36)
    pcmcia_request_configuration() got renamed to pcmcia_enable_device(),
@@ -19,14 +25,14 @@ This file details changes in 2.6 which affect PCMCIA card driver authors:
 
 * pcmcia_request_window changes (as of 2.6.36)
    Instead of win_req_t, drivers are now requested to fill out
-   struct pcmcia_device *p_dev->resource[2,3,4,5] for up to four ioport
+   `struct pcmcia_device *p_dev->resource[2,3,4,5]` for up to four ioport
    ranges. After a call to pcmcia_request_window(), the regions found there
    are reserved and may be used immediately -- until pcmcia_release_window()
    is called.
 
 * pcmcia_request_io changes (as of 2.6.36)
    Instead of io_req_t, drivers are now requested to fill out
-   struct pcmcia_device *p_dev->resource[0,1] for up to two ioport
+   `struct pcmcia_device *p_dev->resource[0,1]` for up to two ioport
    ranges. After a call to pcmcia_request_io(), the ports found there
    are reserved, after calling pcmcia_request_configuration(), they may
    be used.
@@ -42,7 +48,8 @@ This file details changes in 2.6 which affect PCMCIA card driver authors:
 * New IRQ request rules (as of 2.6.35)
    Instead of the old pcmcia_request_irq() interface, drivers may now
    choose between:
-   - calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq.
+
+   - calling request_irq/free_irq directly. Use the IRQ from `*p_dev->irq`.
    - use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will
      clean up automatically on calls to pcmcia_disable_device() or
      device ejection.
@@ -72,13 +79,16 @@ This file details changes in 2.6 which affect PCMCIA card driver authors:
    exports for them were removed.
 
 * Unify detach and REMOVAL event code, as well as attach and INSERTION
-  code (as of 2.6.16)
+  code (as of 2.6.16)::
+
        void (*remove)          (struct pcmcia_device *dev);
        int (*probe)            (struct pcmcia_device *dev);
 
-* Move suspend, resume and reset out of event handler (as of 2.6.16)
+* Move suspend, resume and reset out of event handler (as of 2.6.16)::
+
        int (*suspend)          (struct pcmcia_device *dev);
        int (*resume)           (struct pcmcia_device *dev);
+
   should be initialized in struct pcmcia_driver, and handle
   (SUSPEND == RESET_PHYSICAL) and (RESUME == CARD_RESET) events
 
@@ -117,7 +127,8 @@ This file details changes in 2.6 which affect PCMCIA card driver authors:
 * core functions no longer available (as of 2.6.11)
    The following functions have been removed from the kernel source
    because they are unused by all in-kernel drivers, and no external
-   driver was reported to rely on them:
+   driver was reported to rely on them::
+
 	pcmcia_get_first_region()
 	pcmcia_get_next_region()
 	pcmcia_modify_window()
diff --git a/Documentation/pcmcia/driver.txt b/Documentation/pcmcia/driver.rst
similarity index 66%
rename from Documentation/pcmcia/driver.txt
rename to Documentation/pcmcia/driver.rst
index 0ac167920778..5c4fe84d51c1 100644
--- a/Documentation/pcmcia/driver.txt
+++ b/Documentation/pcmcia/driver.rst
@@ -1,16 +1,16 @@
+=============
 PCMCIA Driver
--------------
-
+=============
 
 sysfs
 -----
 
 New PCMCIA IDs may be added to a device driver pcmcia_device_id table at
-runtime as shown below:
+runtime as shown below::
 
-echo "match_flags manf_id card_id func_id function device_no \
-prod_id_hash[0] prod_id_hash[1] prod_id_hash[2] prod_id_hash[3]" > \
-/sys/bus/pcmcia/drivers/{driver}/new_id
+  echo "match_flags manf_id card_id func_id function device_no \
+  prod_id_hash[0] prod_id_hash[1] prod_id_hash[2] prod_id_hash[3]" > \
+  /sys/bus/pcmcia/drivers/{driver}/new_id
 
 All fields are passed in as hexadecimal values (no leading 0x).
 The meaning is described in the PCMCIA specification, the match_flags is
@@ -22,9 +22,9 @@ PCMCIA device listed in its (newly updated) pcmcia_device_id list.
 
 A common use-case is to add a new device according to the manufacturer ID
 and the card ID (form the manf_id and card_id file in the device tree).
-For this, just use:
+For this, just use::
 
-echo "0x3 manf_id card_id 0 0 0 0 0 0 0" > \
-        /sys/bus/pcmcia/drivers/{driver}/new_id
+  echo "0x3 manf_id card_id 0 0 0 0 0 0 0" > \
+    /sys/bus/pcmcia/drivers/{driver}/new_id
 
 after loading the driver.
diff --git a/Documentation/pcmcia/index.rst b/Documentation/pcmcia/index.rst
new file mode 100644
index 000000000000..779c8527109e
--- /dev/null
+++ b/Documentation/pcmcia/index.rst
@@ -0,0 +1,20 @@
+:orphan:
+
+======
+pcmcia
+======
+
+.. toctree::
+    :maxdepth: 1
+
+    driver
+    devicetable
+    locking
+    driver-changes
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/pcmcia/locking.txt b/Documentation/pcmcia/locking.rst
similarity index 81%
rename from Documentation/pcmcia/locking.txt
rename to Documentation/pcmcia/locking.rst
index b2c9b478906b..e35257139c89 100644
--- a/Documentation/pcmcia/locking.txt
+++ b/Documentation/pcmcia/locking.rst
@@ -1,3 +1,7 @@
+=======
+Locking
+=======
+
 This file explains the locking and exclusion scheme used in the PCCARD
 and PCMCIA subsystems.
 
@@ -5,16 +9,21 @@ and PCMCIA subsystems.
 A) Overview, Locking Hierarchy:
 ===============================
 
-pcmcia_socket_list_rwsem	- protects only the list of sockets
-- skt_mutex			- serializes card insert / ejection
-  - ops_mutex			- serializes socket operation
+pcmcia_socket_list_rwsem
+	- protects only the list of sockets
+
+- skt_mutex
+	- serializes card insert / ejection
+
+  - ops_mutex
+	- serializes socket operation
 
 
 B) Exclusion
 ============
 
 The following functions and callbacks to struct pcmcia_socket must
-be called with "skt_mutex" held:
+be called with "skt_mutex" held::
 
 	socket_detect_change()
 	send_event()
@@ -31,7 +40,7 @@ be called with "skt_mutex" held:
 	struct pcmcia_callback	*callback
 
 The following functions and callbacks to struct pcmcia_socket must
-be called with "ops_mutex" held:
+be called with "ops_mutex" held::
 
 	socket_reset()
 	socket_setup()
@@ -39,7 +48,7 @@ be called with "ops_mutex" held:
 	struct pccard_operations	*ops
 	struct pccard_resource_ops	*resource_ops;
 
-Note that send_event() and struct pcmcia_callback *callback must not be
+Note that send_event() and `struct pcmcia_callback *callback` must not be
 called with "ops_mutex" held.
 
 
@@ -60,19 +69,23 @@ The resource_ops and their data are protected by ops_mutex.
 The "main" struct pcmcia_socket is protected as follows (read-only fields
 or single-use fields not mentioned):
 
-- by pcmcia_socket_list_rwsem:
+- by pcmcia_socket_list_rwsem::
+
 	struct list_head	socket_list;
 
-- by thread_lock:
+- by thread_lock::
+
 	unsigned int		thread_events;
 
-- by skt_mutex:
+- by skt_mutex::
+
 	u_int			suspended_state;
 	void			(*tune_bridge);
 	struct pcmcia_callback	*callback;
 	int			resume_status;
 
-- by ops_mutex:
+- by ops_mutex::
+
 	socket_state_t		socket;
 	u_int			state;
 	u_short			lock_count;
@@ -100,7 +113,8 @@ The "main" struct pcmcia_device is protected as follows (read-only fields
 or single-use fields not mentioned):
 
 
-- by pcmcia_socket->ops_mutex:
+- by pcmcia_socket->ops_mutex::
+
 	struct list_head	socket_device_list;
 	struct config_t		*function_config;
 	u16			_irq:1;
@@ -111,7 +125,8 @@ or single-use fields not mentioned):
 	u16			suspended:1;
 	u16			_removed:1;
 
-- by the PCMCIA driver:
+- by the PCMCIA driver::
+
 	io_req_t		io;
 	irq_req_t		irq;
 	config_req_t		conf;
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index a9258f641cee..5230e284bb20 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -67,7 +67,7 @@ static void pcmcia_check_driver(struct pcmcia_driver *p_drv)
 			       "be 0x%x\n", p_drv->name, did->prod_id[i],
 			       did->prod_id_hash[i], hash);
 			printk(KERN_DEBUG "pcmcia: see "
-				"Documentation/pcmcia/devicetable.txt for "
+				"Documentation/pcmcia/devicetable.rst for "
 				"details\n");
 		}
 		did++;
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index 3037157855f0..4e58c20dabcb 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -39,7 +39,7 @@ struct config_t;
 struct net_device;
 
 /* dynamic device IDs for PCMCIA device drivers. See
- * Documentation/pcmcia/driver.txt for details.
+ * Documentation/pcmcia/driver.rst for details.
 */
 struct pcmcia_dynids {
 	struct mutex		lock;
diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h
index 731cde010f42..89629ee57840 100644
--- a/include/pcmcia/ss.h
+++ b/include/pcmcia/ss.h
@@ -190,7 +190,7 @@ struct pcmcia_socket {
 	unsigned int			sysfs_events;
 
 	/* For the non-trivial interaction between these locks,
-	 * see Documentation/pcmcia/locking.txt */
+	 * see Documentation/pcmcia/locking.rst */
 	struct mutex			skt_mutex;
 	struct mutex			ops_mutex;
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 25/79] docs: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (22 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 24/79] docs: pcmcia: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:48     ` Bjorn Helgaas
  2019-04-25 18:07     ` Mark Brown
  2019-04-22 13:27   ` [PATCH v2 26/79] docs: powerpc: " Mauro Carvalho Chehab
                     ` (53 subsequent siblings)
  77 siblings, 2 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Sebastian Reichel, Bjorn Helgaas,
	Rafael J. Wysocki, Viresh Kumar, Len Brown, Pavel Machek,
	Nishanth Menon, Stephen Boyd, Liam Girdwood, Mark Brown,
	Mathieu Poirier, Suzuki K Poulose, Harry Wei, Alex Shi,
	Thomas Gleixner, Ingo Molnar, Borislav Petkov, H. Peter Anvin,
	x86, Jani Nikula, Joonas Lahtinen, Rodrigo Vivi, David Airlie,
	Daniel Vetter, Johannes Berg, David S. Miller, linux-pm,
	linux-pci, linux-arm-kernel, intel-gfx, dri-devel,
	linux-wireless, netdev

Convert the PM documents to ReST, in order to allow them to
build with Sphinx.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../ABI/testing/sysfs-class-powercap          |   2 +-
 Documentation/PCI/pci.txt                     |   2 +-
 .../admin-guide/kernel-parameters.txt         |   6 +-
 Documentation/cpu-freq/core.rst               |   2 +-
 Documentation/driver-api/pm/devices.rst       |   6 +-
 .../driver-api/usb/power-management.rst       |   2 +-
 .../power/{apm-acpi.txt => apm-acpi.rst}      |  10 +-
 ...m-debugging.txt => basic-pm-debugging.rst} |  79 +--
 ...harger-manager.txt => charger-manager.rst} | 101 ++--
 ...rivers-testing.txt => drivers-testing.rst} |  15 +-
 .../{energy-model.txt => energy-model.rst}    | 101 ++--
 ...ing-of-tasks.txt => freezing-of-tasks.rst} |  91 ++--
 Documentation/power/index.rst                 |  46 ++
 .../power/{interface.txt => interface.rst}    |  24 +-
 Documentation/power/{opp.txt => opp.rst}      | 175 +++---
 Documentation/power/{pci.txt => pci.rst}      |  87 ++-
 ...qos_interface.txt => pm_qos_interface.rst} | 127 +++--
 Documentation/power/power_supply_class.rst    | 282 ++++++++++
 Documentation/power/power_supply_class.txt    | 231 --------
 Documentation/power/powercap/powercap.rst     | 257 +++++++++
 Documentation/power/powercap/powercap.txt     | 236 ---------
 .../regulator/{consumer.txt => consumer.rst}  | 141 ++---
 .../regulator/{design.txt => design.rst}      |   9 +-
 .../regulator/{machine.txt => machine.rst}    |  47 +-
 .../regulator/{overview.txt => overview.rst}  |  57 +-
 Documentation/power/regulator/regulator.rst   |  32 ++
 Documentation/power/regulator/regulator.txt   |  30 --
 .../power/{runtime_pm.txt => runtime_pm.rst}  | 234 ++++----
 Documentation/power/{s2ram.txt => s2ram.rst}  |  20 +-
 ...hotplug.txt => suspend-and-cpuhotplug.rst} |  42 +-
 ...errupts.txt => suspend-and-interrupts.rst} |   2 +
 ...ap-files.txt => swsusp-and-swap-files.rst} |  17 +-
 ...{swsusp-dmcrypt.txt => swsusp-dmcrypt.rst} | 120 ++---
 Documentation/power/swsusp.rst                | 501 ++++++++++++++++++
 Documentation/power/swsusp.txt                | 446 ----------------
 .../power/{tricks.txt => tricks.rst}          |   6 +-
 ...serland-swsusp.txt => userland-swsusp.rst} |  55 +-
 Documentation/power/{video.txt => video.rst}  | 156 +++---
 Documentation/process/submitting-drivers.rst  |   2 +-
 Documentation/scheduler/sched-energy.txt      |   6 +-
 Documentation/trace/coresight-cpu-debug.txt   |   2 +-
 .../zh_CN/process/submitting-drivers.rst      |   2 +-
 MAINTAINERS                                   |   4 +-
 arch/x86/Kconfig                              |   2 +-
 drivers/gpu/drm/i915/i915_drv.h               |   2 +-
 drivers/opp/Kconfig                           |   2 +-
 drivers/power/supply/power_supply_core.c      |   2 +-
 include/linux/interrupt.h                     |   2 +-
 include/linux/pm.h                            |   2 +-
 kernel/power/Kconfig                          |   6 +-
 net/wireless/Kconfig                          |   2 +-
 51 files changed, 2126 insertions(+), 1707 deletions(-)
 rename Documentation/power/{apm-acpi.txt => apm-acpi.rst} (87%)
 rename Documentation/power/{basic-pm-debugging.txt => basic-pm-debugging.rst} (87%)
 rename Documentation/power/{charger-manager.txt => charger-manager.rst} (78%)
 rename Documentation/power/{drivers-testing.txt => drivers-testing.rst} (86%)
 rename Documentation/power/{energy-model.txt => energy-model.rst} (74%)
 rename Documentation/power/{freezing-of-tasks.txt => freezing-of-tasks.rst} (75%)
 create mode 100644 Documentation/power/index.rst
 rename Documentation/power/{interface.txt => interface.rst} (84%)
 rename Documentation/power/{opp.txt => opp.rst} (78%)
 rename Documentation/power/{pci.txt => pci.rst} (97%)
 rename Documentation/power/{pm_qos_interface.txt => pm_qos_interface.rst} (62%)
 create mode 100644 Documentation/power/power_supply_class.rst
 delete mode 100644 Documentation/power/power_supply_class.txt
 create mode 100644 Documentation/power/powercap/powercap.rst
 delete mode 100644 Documentation/power/powercap/powercap.txt
 rename Documentation/power/regulator/{consumer.txt => consumer.rst} (61%)
 rename Documentation/power/regulator/{design.txt => design.rst} (86%)
 rename Documentation/power/regulator/{machine.txt => machine.rst} (75%)
 rename Documentation/power/regulator/{overview.txt => overview.rst} (79%)
 create mode 100644 Documentation/power/regulator/regulator.rst
 delete mode 100644 Documentation/power/regulator/regulator.txt
 rename Documentation/power/{runtime_pm.txt => runtime_pm.rst} (89%)
 rename Documentation/power/{s2ram.txt => s2ram.rst} (92%)
 rename Documentation/power/{suspend-and-cpuhotplug.txt => suspend-and-cpuhotplug.rst} (90%)
 rename Documentation/power/{suspend-and-interrupts.txt => suspend-and-interrupts.rst} (98%)
 rename Documentation/power/{swsusp-and-swap-files.txt => swsusp-and-swap-files.rst} (83%)
 rename Documentation/power/{swsusp-dmcrypt.txt => swsusp-dmcrypt.rst} (67%)
 create mode 100644 Documentation/power/swsusp.rst
 delete mode 100644 Documentation/power/swsusp.txt
 rename Documentation/power/{tricks.txt => tricks.rst} (93%)
 rename Documentation/power/{userland-swsusp.txt => userland-swsusp.rst} (85%)
 rename Documentation/power/{video.txt => video.rst} (56%)

diff --git a/Documentation/ABI/testing/sysfs-class-powercap b/Documentation/ABI/testing/sysfs-class-powercap
index db3b3ff70d84..742dfd966592 100644
--- a/Documentation/ABI/testing/sysfs-class-powercap
+++ b/Documentation/ABI/testing/sysfs-class-powercap
@@ -5,7 +5,7 @@ Contact:	linux-pm@vger.kernel.org
 Description:
 		The powercap/ class sub directory belongs to the power cap
 		subsystem. Refer to
-		Documentation/power/powercap/powercap.txt for details.
+		Documentation/power/powercap/powercap.rst for details.
 
 What:		/sys/class/powercap/<control type>
 Date:		September 2013
diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt
index badb26ac33dc..bbbae19f10b0 100644
--- a/Documentation/PCI/pci.txt
+++ b/Documentation/PCI/pci.txt
@@ -110,7 +110,7 @@ initialization with a pointer to a structure describing the driver
 	resume_early	Wake device from low power state.
 	resume		Wake device from low power state.
 
-		(Please see Documentation/power/pci.txt for descriptions
+		(Please see Documentation/power/pci.rst for descriptions
 		of PCI Power Management and the related functions.)
 
 	shutdown	Hook into reboot_notifier_list (kernel/sys.c).
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index a4e8e6435fff..fdc04f23d093 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -13,7 +13,7 @@
 			For ARM64, ONLY "acpi=off", "acpi=on" or "acpi=force"
 			are available
 
-			See also Documentation/power/runtime_pm.txt, pci=noacpi
+			See also Documentation/power/runtime_pm.rst, pci=noacpi
 
 	acpi_apic_instance=	[ACPI, IOAPIC]
 			Format: <int>
@@ -223,7 +223,7 @@
 	acpi_sleep=	[HW,ACPI] Sleep options
 			Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
 				  old_ordering, nonvs, sci_force_enable, nobl }
-			See Documentation/power/video.txt for information on
+			See Documentation/power/video.rst for information on
 			s3_bios and s3_mode.
 			s3_beep is for debugging; it makes the PC's speaker beep
 			as soon as the kernel's real-mode entry point is called.
@@ -4040,7 +4040,7 @@
 			Specify the offset from the beginning of the partition
 			given by "resume=" at which the swap header is located,
 			in <PAGE_SIZE> units (needed only for swap files).
-			See  Documentation/power/swsusp-and-swap-files.txt
+			See  Documentation/power/swsusp-and-swap-files.rst
 
 	resumedelay=	[HIBERNATION] Delay (in seconds) to pause before attempting to
 			read the resume files
diff --git a/Documentation/cpu-freq/core.rst b/Documentation/cpu-freq/core.rst
index c719e3cb700c..003faebd42c2 100644
--- a/Documentation/cpu-freq/core.rst
+++ b/Documentation/cpu-freq/core.rst
@@ -89,7 +89,7 @@ flags	flags of the cpufreq driver
 
 3. CPUFreq Table Generation with Operating Performance Point (OPP)
 ==================================================================
-For details about OPP, see Documentation/power/opp.txt
+For details about OPP, see Documentation/power/opp.rst
 
 dev_pm_opp_init_cpufreq_table
 	This function provides a ready to use conversion routine to translate
diff --git a/Documentation/driver-api/pm/devices.rst b/Documentation/driver-api/pm/devices.rst
index 30835683616a..f66c7b9126ea 100644
--- a/Documentation/driver-api/pm/devices.rst
+++ b/Documentation/driver-api/pm/devices.rst
@@ -225,7 +225,7 @@ system-wide transition to a sleep state even though its :c:member:`runtime_auto`
 flag is clear.
 
 For more information about the runtime power management framework, refer to
-:file:`Documentation/power/runtime_pm.txt`.
+:file:`Documentation/power/runtime_pm.rst`.
 
 
 Calling Drivers to Enter and Leave System Sleep States
@@ -728,7 +728,7 @@ it into account in any way.
 
 Devices may be defined as IRQ-safe which indicates to the PM core that their
 runtime PM callbacks may be invoked with disabled interrupts (see
-:file:`Documentation/power/runtime_pm.txt` for more information).  If an
+:file:`Documentation/power/runtime_pm.rst` for more information).  If an
 IRQ-safe device belongs to a PM domain, the runtime PM of the domain will be
 disallowed, unless the domain itself is defined as IRQ-safe. However, it
 makes sense to define a PM domain as IRQ-safe only if all the devices in it
@@ -795,7 +795,7 @@ so on) and the final state of the device must reflect the "active" runtime PM
 status in that case.
 
 During system-wide resume from a sleep state it's easiest to put devices into
-the full-power state, as explained in :file:`Documentation/power/runtime_pm.txt`.
+the full-power state, as explained in :file:`Documentation/power/runtime_pm.rst`.
 [Refer to that document for more information regarding this particular issue as
 well as for information on the device runtime power management framework in
 general.]
diff --git a/Documentation/driver-api/usb/power-management.rst b/Documentation/driver-api/usb/power-management.rst
index 79beb807996b..4f1f0e7e5d9f 100644
--- a/Documentation/driver-api/usb/power-management.rst
+++ b/Documentation/driver-api/usb/power-management.rst
@@ -46,7 +46,7 @@ device is turned off while the system as a whole remains running, we
 call it a "dynamic suspend" (also known as a "runtime suspend" or
 "selective suspend").  This document concentrates mostly on how
 dynamic PM is implemented in the USB subsystem, although system PM is
-covered to some extent (see ``Documentation/power/*.txt`` for more
+covered to some extent (see ``Documentation/power/*.rst`` for more
 information about system PM).
 
 System PM support is present only if the kernel was built with
diff --git a/Documentation/power/apm-acpi.txt b/Documentation/power/apm-acpi.rst
similarity index 87%
rename from Documentation/power/apm-acpi.txt
rename to Documentation/power/apm-acpi.rst
index 6cc423d3662e..5b90d947126d 100644
--- a/Documentation/power/apm-acpi.txt
+++ b/Documentation/power/apm-acpi.rst
@@ -1,5 +1,7 @@
+============
 APM or ACPI?
-------------
+============
+
 If you have a relatively recent x86 mobile, desktop, or server system,
 odds are it supports either Advanced Power Management (APM) or
 Advanced Configuration and Power Interface (ACPI).  ACPI is the newer
@@ -28,5 +30,7 @@ and be sure that they are started sometime in the system boot process.
 Go ahead and start both.  If ACPI or APM is not available on your
 system the associated daemon will exit gracefully.
 
-  apmd:   http://ftp.debian.org/pool/main/a/apmd/
-  acpid:  http://acpid.sf.net/
+  =====  =======================================
+  apmd   http://ftp.debian.org/pool/main/a/apmd/
+  acpid  http://acpid.sf.net/
+  =====  =======================================
diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.rst
similarity index 87%
rename from Documentation/power/basic-pm-debugging.txt
rename to Documentation/power/basic-pm-debugging.rst
index 708f87f78a75..69862e759c30 100644
--- a/Documentation/power/basic-pm-debugging.txt
+++ b/Documentation/power/basic-pm-debugging.rst
@@ -1,12 +1,16 @@
+=================================
 Debugging hibernation and suspend
+=================================
+
 	(C) 2007 Rafael J. Wysocki <rjw@sisk.pl>, GPL
 
 1. Testing hibernation (aka suspend to disk or STD)
+===================================================
 
-To check if hibernation works, you can try to hibernate in the "reboot" mode:
+To check if hibernation works, you can try to hibernate in the "reboot" mode::
 
-# echo reboot > /sys/power/disk
-# echo disk > /sys/power/state
+	# echo reboot > /sys/power/disk
+	# echo disk > /sys/power/state
 
 and the system should create a hibernation image, reboot, resume and get back to
 the command prompt where you have started the transition.  If that happens,
@@ -15,20 +19,21 @@ test at least a couple of times in a row for confidence.  [This is necessary,
 because some problems only show up on a second attempt at suspending and
 resuming the system.]  Moreover, hibernating in the "reboot" and "shutdown"
 modes causes the PM core to skip some platform-related callbacks which on ACPI
-systems might be necessary to make hibernation work.  Thus, if your machine fails
-to hibernate or resume in the "reboot" mode, you should try the "platform" mode:
+systems might be necessary to make hibernation work.  Thus, if your machine
+fails to hibernate or resume in the "reboot" mode, you should try the
+"platform" mode::
 
-# echo platform > /sys/power/disk
-# echo disk > /sys/power/state
+	# echo platform > /sys/power/disk
+	# echo disk > /sys/power/state
 
 which is the default and recommended mode of hibernation.
 
 Unfortunately, the "platform" mode of hibernation does not work on some systems
 with broken BIOSes.  In such cases the "shutdown" mode of hibernation might
-work:
+work::
 
-# echo shutdown > /sys/power/disk
-# echo disk > /sys/power/state
+	# echo shutdown > /sys/power/disk
+	# echo disk > /sys/power/state
 
 (it is similar to the "reboot" mode, but it requires you to press the power
 button to make the system resume).
@@ -37,6 +42,7 @@ If neither "platform" nor "shutdown" hibernation mode works, you will need to
 identify what goes wrong.
 
 a) Test modes of hibernation
+----------------------------
 
 To find out why hibernation fails on your system, you can use a special testing
 facility available if the kernel is compiled with CONFIG_PM_DEBUG set.  Then,
@@ -44,36 +50,38 @@ there is the file /sys/power/pm_test that can be used to make the hibernation
 core run in a test mode.  There are 5 test modes available:
 
 freezer
-- test the freezing of processes
+	- test the freezing of processes
 
 devices
-- test the freezing of processes and suspending of devices
+	- test the freezing of processes and suspending of devices
 
 platform
-- test the freezing of processes, suspending of devices and platform
-  global control methods(*)
+	- test the freezing of processes, suspending of devices and platform
+	  global control methods [1]_
 
 processors
-- test the freezing of processes, suspending of devices, platform
-  global control methods(*) and the disabling of nonboot CPUs
+	- test the freezing of processes, suspending of devices, platform
+	  global control methods [1]_ and the disabling of nonboot CPUs
 
 core
-- test the freezing of processes, suspending of devices, platform global
-  control methods(*), the disabling of nonboot CPUs and suspending of
-  platform/system devices
+	- test the freezing of processes, suspending of devices, platform global
+	  control methods\ [1]_, the disabling of nonboot CPUs and suspending
+	  of platform/system devices
 
-(*) the platform global control methods are only available on ACPI systems
+.. [1]
+
+    the platform global control methods are only available on ACPI systems
     and are only tested if the hibernation mode is set to "platform"
 
 To use one of them it is necessary to write the corresponding string to
 /sys/power/pm_test (eg. "devices" to test the freezing of processes and
 suspending devices) and issue the standard hibernation commands.  For example,
 to use the "devices" test mode along with the "platform" mode of hibernation,
-you should do the following:
+you should do the following::
 
-# echo devices > /sys/power/pm_test
-# echo platform > /sys/power/disk
-# echo disk > /sys/power/state
+	# echo devices > /sys/power/pm_test
+	# echo platform > /sys/power/disk
+	# echo disk > /sys/power/state
 
 Then, the kernel will try to freeze processes, suspend devices, wait a few
 seconds (5 by default, but configurable by the suspend.pm_test_delay module
@@ -108,11 +116,12 @@ If the "devices" test fails, most likely there is a driver that cannot suspend
 or resume its device (in the latter case the system may hang or become unstable
 after the test, so please take that into consideration).  To find this driver,
 you can carry out a binary search according to the rules:
+
 - if the test fails, unload a half of the drivers currently loaded and repeat
-(that would probably involve rebooting the system, so always note what drivers
-have been loaded before the test),
+  (that would probably involve rebooting the system, so always note what drivers
+  have been loaded before the test),
 - if the test succeeds, load a half of the drivers you have unloaded most
-recently and repeat.
+  recently and repeat.
 
 Once you have found the failing driver (there can be more than just one of
 them), you have to unload it every time before hibernation.  In that case please
@@ -146,6 +155,7 @@ indicates a serious problem that very well may be related to the hardware, but
 please report it anyway.
 
 b) Testing minimal configuration
+--------------------------------
 
 If all of the hibernation test modes work, you can boot the system with the
 "init=/bin/bash" command line parameter and attempt to hibernate in the
@@ -165,14 +175,15 @@ Again, if you find the offending module(s), it(they) must be unloaded every time
 before hibernation, and please report the problem with it(them).
 
 c) Using the "test_resume" hibernation option
+---------------------------------------------
 
 /sys/power/disk generally tells the kernel what to do after creating a
 hibernation image.  One of the available options is "test_resume" which
 causes the just created image to be used for immediate restoration.  Namely,
-after doing:
+after doing::
 
-# echo test_resume > /sys/power/disk
-# echo disk > /sys/power/state
+	# echo test_resume > /sys/power/disk
+	# echo disk > /sys/power/state
 
 a hibernation image will be created and a resume from it will be triggered
 immediately without involving the platform firmware in any way.
@@ -190,6 +201,7 @@ to resume may be related to the differences between the restore and image
 kernels.
 
 d) Advanced debugging
+---------------------
 
 In case that hibernation does not work on your system even in the minimal
 configuration and compiling more drivers as modules is not practical or some
@@ -200,9 +212,10 @@ kernel messages using the serial console.  This may provide you with some
 information about the reasons of the suspend (resume) failure.  Alternatively,
 it may be possible to use a FireWire port for debugging with firescope
 (http://v3.sk/~lkundrak/firescope/).  On x86 it is also possible to
-use the PM_TRACE mechanism documented in Documentation/power/s2ram.txt .
+use the PM_TRACE mechanism documented in Documentation/power/s2ram.rst .
 
 2. Testing suspend to RAM (STR)
+===============================
 
 To verify that the STR works, it is generally more convenient to use the s2ram
 tool available from http://suspend.sf.net and documented at
@@ -230,7 +243,8 @@ you will have to unload them every time before an STR transition (ie. before
 you run s2ram), and please report the problems with them.
 
 There is a debugfs entry which shows the suspend to RAM statistics. Here is an
-example of its output.
+example of its output::
+
 	# mount -t debugfs none /sys/kernel/debug
 	# cat /sys/kernel/debug/suspend_stats
 	success: 20
@@ -248,6 +262,7 @@ example of its output.
 				-16
 	  last_failed_step:	suspend
 				suspend
+
 Field success means the success number of suspend to RAM, and field fail means
 the failure number. Others are the failure number of different steps of suspend
 to RAM. suspend_stats just lists the last 2 failed devices, error number and
diff --git a/Documentation/power/charger-manager.txt b/Documentation/power/charger-manager.rst
similarity index 78%
rename from Documentation/power/charger-manager.txt
rename to Documentation/power/charger-manager.rst
index 9ff1105e58d6..84fab9376792 100644
--- a/Documentation/power/charger-manager.txt
+++ b/Documentation/power/charger-manager.rst
@@ -1,4 +1,7 @@
+===============
 Charger Manager
+===============
+
 	(C) 2011 MyungJoo Ham <myungjoo.ham@samsung.com>, GPL
 
 Charger Manager provides in-kernel battery charger management that
@@ -55,41 +58,39 @@ Charger Manager supports the following:
 	notification to users with UEVENT.
 
 2. Global Charger-Manager Data related with suspend_again
-========================================================
+=========================================================
 In order to setup Charger Manager with suspend-again feature
 (in-suspend monitoring), the user should provide charger_global_desc
-with setup_charger_manager(struct charger_global_desc *).
+with setup_charger_manager(`struct charger_global_desc *`).
 This charger_global_desc data for in-suspend monitoring is global
 as the name suggests. Thus, the user needs to provide only once even
 if there are multiple batteries. If there are multiple batteries, the
 multiple instances of Charger Manager share the same charger_global_desc
 and it will manage in-suspend monitoring for all instances of Charger Manager.
 
-The user needs to provide all the three entries properly in order to activate
-in-suspend monitoring:
+The user needs to provide all the three entries to `struct charger_global_desc`
+properly in order to activate in-suspend monitoring:
 
-struct charger_global_desc {
-
-char *rtc_name;
-	: The name of rtc (e.g., "rtc0") used to wakeup the system from
+`char *rtc_name;`
+	The name of rtc (e.g., "rtc0") used to wakeup the system from
 	suspend for Charger Manager. The alarm interrupt (AIE) of the rtc
 	should be able to wake up the system from suspend. Charger Manager
 	saves and restores the alarm value and use the previously-defined
 	alarm if it is going to go off earlier than Charger Manager so that
 	Charger Manager does not interfere with previously-defined alarms.
 
-bool (*rtc_only_wakeup)(void);
-	: This callback should let CM know whether
+`bool (*rtc_only_wakeup)(void);`
+	This callback should let CM know whether
 	the wakeup-from-suspend is caused only by the alarm of "rtc" in the
 	same struct. If there is any other wakeup source triggered the
 	wakeup, it should return false. If the "rtc" is the only wakeup
 	reason, it should return true.
 
-bool assume_timer_stops_in_suspend;
-	: if true, Charger Manager assumes that
+`bool assume_timer_stops_in_suspend;`
+	if true, Charger Manager assumes that
 	the timer (CM uses jiffies as timer) stops during suspend. Then, CM
 	assumes that the suspend-duration is same as the alarm length.
-};
+
 
 3. How to setup suspend_again
 =============================
@@ -109,26 +110,28 @@ if the system was woken up by Charger Manager and the polling
 =============================================
 For each battery charged independently from other batteries (if a series of
 batteries are charged by a single charger, they are counted as one independent
-battery), an instance of Charger Manager is attached to it.
+battery), an instance of Charger Manager is attached to it. The following
 
-struct charger_desc {
+struct charger_desc elements:
 
-char *psy_name;
-	: The power-supply-class name of the battery. Default is
+`char *psy_name;`
+	The power-supply-class name of the battery. Default is
 	"battery" if psy_name is NULL. Users can access the psy entries
 	at "/sys/class/power_supply/[psy_name]/".
 
-enum polling_modes polling_mode;
-	: CM_POLL_DISABLE: do not poll this battery.
-	  CM_POLL_ALWAYS: always poll this battery.
-	  CM_POLL_EXTERNAL_POWER_ONLY: poll this battery if and only if
-				       an external power source is attached.
-	  CM_POLL_CHARGING_ONLY: poll this battery if and only if the
-				 battery is being charged.
+`enum polling_modes polling_mode;`
+	  CM_POLL_DISABLE:
+		do not poll this battery.
+	  CM_POLL_ALWAYS:
+		always poll this battery.
+	  CM_POLL_EXTERNAL_POWER_ONLY:
+		poll this battery if and only if an external power
+		source is attached.
+	  CM_POLL_CHARGING_ONLY:
+		poll this battery if and only if the battery is being charged.
 
-unsigned int fullbatt_vchkdrop_ms;
-unsigned int fullbatt_vchkdrop_uV;
-	: If both have non-zero values, Charger Manager will check the
+`unsigned int fullbatt_vchkdrop_ms; / unsigned int fullbatt_vchkdrop_uV;`
+	If both have non-zero values, Charger Manager will check the
 	battery voltage drop fullbatt_vchkdrop_ms after the battery is fully
 	charged. If the voltage drop is over fullbatt_vchkdrop_uV, Charger
 	Manager will try to recharge the battery by disabling and enabling
@@ -136,50 +139,52 @@ unsigned int fullbatt_vchkdrop_uV;
 	condition) is needed to be implemented with hardware interrupts from
 	fuel gauges or charger devices/chips.
 
-unsigned int fullbatt_uV;
-	: If specified with a non-zero value, Charger Manager assumes
+`unsigned int fullbatt_uV;`
+	If specified with a non-zero value, Charger Manager assumes
 	that the battery is full (capacity = 100) if the battery is not being
 	charged and the battery voltage is equal to or greater than
 	fullbatt_uV.
 
-unsigned int polling_interval_ms;
-	: Required polling interval in ms. Charger Manager will poll
+`unsigned int polling_interval_ms;`
+	Required polling interval in ms. Charger Manager will poll
 	this battery every polling_interval_ms or more frequently.
 
-enum data_source battery_present;
-	: CM_BATTERY_PRESENT: assume that the battery exists.
-	CM_NO_BATTERY: assume that the battery does not exists.
-	CM_FUEL_GAUGE: get battery presence information from fuel gauge.
-	CM_CHARGER_STAT: get battery presence from chargers.
+`enum data_source battery_present;`
+	CM_BATTERY_PRESENT:
+		assume that the battery exists.
+	CM_NO_BATTERY:
+		assume that the battery does not exists.
+	CM_FUEL_GAUGE:
+		get battery presence information from fuel gauge.
+	CM_CHARGER_STAT:
+		get battery presence from chargers.
 
-char **psy_charger_stat;
-	: An array ending with NULL that has power-supply-class names of
+`char **psy_charger_stat;`
+	An array ending with NULL that has power-supply-class names of
 	chargers. Each power-supply-class should provide "PRESENT" (if
 	battery_present is "CM_CHARGER_STAT"), "ONLINE" (shows whether an
 	external power source is attached or not), and "STATUS" (shows whether
 	the battery is {"FULL" or not FULL} or {"FULL", "Charging",
 	"Discharging", "NotCharging"}).
 
-int num_charger_regulators;
-struct regulator_bulk_data *charger_regulators;
-	: Regulators representing the chargers in the form for
+`int num_charger_regulators; / struct regulator_bulk_data *charger_regulators;`
+	Regulators representing the chargers in the form for
 	regulator framework's bulk functions.
 
-char *psy_fuel_gauge;
-	: Power-supply-class name of the fuel gauge.
+`char *psy_fuel_gauge;`
+	Power-supply-class name of the fuel gauge.
 
-int (*temperature_out_of_range)(int *mC);
-bool measure_battery_temp;
-	: This callback returns 0 if the temperature is safe for charging,
+`int (*temperature_out_of_range)(int *mC); / bool measure_battery_temp;`
+	This callback returns 0 if the temperature is safe for charging,
 	a positive number if it is too hot to charge, and a negative number
 	if it is too cold to charge. With the variable mC, the callback returns
 	the temperature in 1/1000 of centigrade.
 	The source of temperature can be battery or ambient one according to
 	the value of measure_battery_temp.
-};
+
 
 5. Notify Charger-Manager of charger events: cm_notify_event()
-=========================================================
+==============================================================
 If there is an charger event is required to notify
 Charger Manager, a charger device driver that triggers the event can call
 cm_notify_event(psy, type, msg) to notify the corresponding Charger Manager.
diff --git a/Documentation/power/drivers-testing.txt b/Documentation/power/drivers-testing.rst
similarity index 86%
rename from Documentation/power/drivers-testing.txt
rename to Documentation/power/drivers-testing.rst
index 638afdf4d6b8..e53f1999fc39 100644
--- a/Documentation/power/drivers-testing.txt
+++ b/Documentation/power/drivers-testing.rst
@@ -1,7 +1,11 @@
+====================================================
 Testing suspend and resume support in device drivers
+====================================================
+
 	(C) 2007 Rafael J. Wysocki <rjw@sisk.pl>, GPL
 
 1. Preparing the test system
+============================
 
 Unfortunately, to effectively test the support for the system-wide suspend and
 resume transitions in a driver, it is necessary to suspend and resume a fully
@@ -14,19 +18,20 @@ the machine's BIOS.
 Of course, for this purpose the test system has to be known to suspend and
 resume without the driver being tested.  Thus, if possible, you should first
 resolve all suspend/resume-related problems in the test system before you start
-testing the new driver.  Please see Documentation/power/basic-pm-debugging.txt
+testing the new driver.  Please see Documentation/power/basic-pm-debugging.rst
 for more information about the debugging of suspend/resume functionality.
 
 2. Testing the driver
+=====================
 
 Once you have resolved the suspend/resume-related problems with your test system
 without the new driver, you are ready to test it:
 
 a) Build the driver as a module, load it and try the test modes of hibernation
-   (see: Documentation/power/basic-pm-debugging.txt, 1).
+   (see: Documentation/power/basic-pm-debugging.rst, 1).
 
 b) Load the driver and attempt to hibernate in the "reboot", "shutdown" and
-   "platform" modes (see: Documentation/power/basic-pm-debugging.txt, 1).
+   "platform" modes (see: Documentation/power/basic-pm-debugging.rst, 1).
 
 c) Compile the driver directly into the kernel and try the test modes of
    hibernation.
@@ -34,12 +39,12 @@ c) Compile the driver directly into the kernel and try the test modes of
 d) Attempt to hibernate with the driver compiled directly into the kernel
    in the "reboot", "shutdown" and "platform" modes.
 
-e) Try the test modes of suspend (see: Documentation/power/basic-pm-debugging.txt,
+e) Try the test modes of suspend (see: Documentation/power/basic-pm-debugging.rst,
    2).  [As far as the STR tests are concerned, it should not matter whether or
    not the driver is built as a module.]
 
 f) Attempt to suspend to RAM using the s2ram tool with the driver loaded
-   (see: Documentation/power/basic-pm-debugging.txt, 2).
+   (see: Documentation/power/basic-pm-debugging.rst, 2).
 
 Each of the above tests should be repeated several times and the STD tests
 should be mixed with the STR tests.  If any of them fails, the driver cannot be
diff --git a/Documentation/power/energy-model.txt b/Documentation/power/energy-model.rst
similarity index 74%
rename from Documentation/power/energy-model.txt
rename to Documentation/power/energy-model.rst
index a2b0ae4c76bd..90a345d57ae9 100644
--- a/Documentation/power/energy-model.txt
+++ b/Documentation/power/energy-model.rst
@@ -1,6 +1,6 @@
-                           ====================
-                           Energy Model of CPUs
-                           ====================
+====================
+Energy Model of CPUs
+====================
 
 1. Overview
 -----------
@@ -20,7 +20,7 @@ kernel, hence enabling to avoid redundant work.
 
 The figure below depicts an example of drivers (Arm-specific here, but the
 approach is applicable to any architecture) providing power costs to the EM
-framework, and interested clients reading the data from it.
+framework, and interested clients reading the data from it::
 
        +---------------+  +-----------------+  +---------------+
        | Thermal (IPA) |  | Scheduler (EAS) |  |     Other     |
@@ -58,15 +58,17 @@ micro-architectures.
 2. Core APIs
 ------------
 
-  2.1 Config options
+2.1 Config options
+^^^^^^^^^^^^^^^^^^
 
 CONFIG_ENERGY_MODEL must be enabled to use the EM framework.
 
 
-  2.2 Registration of performance domains
+2.2 Registration of performance domains
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Drivers are expected to register performance domains into the EM framework by
-calling the following API:
+calling the following API::
 
   int em_register_perf_domain(cpumask_t *span, unsigned int nr_states,
 			      struct em_data_callback *cb);
@@ -80,7 +82,8 @@ callback, and kernel/power/energy_model.c for further documentation on this
 API.
 
 
-  2.3 Accessing performance domains
+2.3 Accessing performance domains
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Subsystems interested in the energy model of a CPU can retrieve it using the
 em_cpu_get() API. The energy model tables are allocated once upon creation of
@@ -99,46 +102,46 @@ More details about the above APIs can be found in include/linux/energy_model.h.
 This section provides a simple example of a CPUFreq driver registering a
 performance domain in the Energy Model framework using the (fake) 'foo'
 protocol. The driver implements an est_power() function to be provided to the
-EM framework.
+EM framework::
 
- -> drivers/cpufreq/foo_cpufreq.c
+  -> drivers/cpufreq/foo_cpufreq.c
 
-01	static int est_power(unsigned long *mW, unsigned long *KHz, int cpu)
-02	{
-03		long freq, power;
-04
-05		/* Use the 'foo' protocol to ceil the frequency */
-06		freq = foo_get_freq_ceil(cpu, *KHz);
-07		if (freq < 0);
-08			return freq;
-09
-10		/* Estimate the power cost for the CPU at the relevant freq. */
-11		power = foo_estimate_power(cpu, freq);
-12		if (power < 0);
-13			return power;
-14
-15		/* Return the values to the EM framework */
-16		*mW = power;
-17		*KHz = freq;
-18
-19		return 0;
-20	}
-21
-22	static int foo_cpufreq_init(struct cpufreq_policy *policy)
-23	{
-24		struct em_data_callback em_cb = EM_DATA_CB(est_power);
-25		int nr_opp, ret;
-26
-27		/* Do the actual CPUFreq init work ... */
-28		ret = do_foo_cpufreq_init(policy);
-29		if (ret)
-30			return ret;
-31
-32		/* Find the number of OPPs for this policy */
-33		nr_opp = foo_get_nr_opp(policy);
-34
-35		/* And register the new performance domain */
-36		em_register_perf_domain(policy->cpus, nr_opp, &em_cb);
-37
-38	        return 0;
-39	}
+  01	static int est_power(unsigned long *mW, unsigned long *KHz, int cpu)
+  02	{
+  03		long freq, power;
+  04
+  05		/* Use the 'foo' protocol to ceil the frequency */
+  06		freq = foo_get_freq_ceil(cpu, *KHz);
+  07		if (freq < 0);
+  08			return freq;
+  09
+  10		/* Estimate the power cost for the CPU at the relevant freq. */
+  11		power = foo_estimate_power(cpu, freq);
+  12		if (power < 0);
+  13			return power;
+  14
+  15		/* Return the values to the EM framework */
+  16		*mW = power;
+  17		*KHz = freq;
+  18
+  19		return 0;
+  20	}
+  21
+  22	static int foo_cpufreq_init(struct cpufreq_policy *policy)
+  23	{
+  24		struct em_data_callback em_cb = EM_DATA_CB(est_power);
+  25		int nr_opp, ret;
+  26
+  27		/* Do the actual CPUFreq init work ... */
+  28		ret = do_foo_cpufreq_init(policy);
+  29		if (ret)
+  30			return ret;
+  31
+  32		/* Find the number of OPPs for this policy */
+  33		nr_opp = foo_get_nr_opp(policy);
+  34
+  35		/* And register the new performance domain */
+  36		em_register_perf_domain(policy->cpus, nr_opp, &em_cb);
+  37
+  38	        return 0;
+  39	}
diff --git a/Documentation/power/freezing-of-tasks.txt b/Documentation/power/freezing-of-tasks.rst
similarity index 75%
rename from Documentation/power/freezing-of-tasks.txt
rename to Documentation/power/freezing-of-tasks.rst
index cd283190855a..ef110fe55e82 100644
--- a/Documentation/power/freezing-of-tasks.txt
+++ b/Documentation/power/freezing-of-tasks.rst
@@ -1,13 +1,18 @@
+=================
 Freezing of tasks
-	(C) 2007 Rafael J. Wysocki <rjw@sisk.pl>, GPL
+=================
+
+(C) 2007 Rafael J. Wysocki <rjw@sisk.pl>, GPL
 
 I. What is the freezing of tasks?
+=================================
 
 The freezing of tasks is a mechanism by which user space processes and some
 kernel threads are controlled during hibernation or system-wide suspend (on some
 architectures).
 
 II. How does it work?
+=====================
 
 There are three per-task flags used for that, PF_NOFREEZE, PF_FROZEN
 and PF_FREEZER_SKIP (the last one is auxiliary).  The tasks that have
@@ -41,7 +46,7 @@ explicitly in suitable places or use the wait_event_freezable() or
 wait_event_freezable_timeout() macros (defined in include/linux/freezer.h)
 that combine interruptible sleep with checking if the task is to be frozen and
 calling try_to_freeze().  The main loop of a freezable kernel thread may look
-like the following one:
+like the following one::
 
 	set_freezable();
 	do {
@@ -65,7 +70,7 @@ order to clear the PF_FROZEN flag for each frozen task.  Then, the tasks that
 have been frozen leave __refrigerator() and continue running.
 
 
-Rationale behind the functions dealing with freezing and thawing of tasks:
+Rationale behind the functions dealing with freezing and thawing of tasks
 -------------------------------------------------------------------------
 
 freeze_processes():
@@ -86,6 +91,7 @@ thaw_processes():
 
 
 III. Which kernel threads are freezable?
+========================================
 
 Kernel threads are not freezable by default.  However, a kernel thread may clear
 PF_NOFREEZE for itself by calling set_freezable() (the resetting of PF_NOFREEZE
@@ -93,37 +99,39 @@ directly is not allowed).  From this point it is regarded as freezable
 and must call try_to_freeze() in a suitable place.
 
 IV. Why do we do that?
+======================
 
 Generally speaking, there is a couple of reasons to use the freezing of tasks:
 
 1. The principal reason is to prevent filesystems from being damaged after
-hibernation.  At the moment we have no simple means of checkpointing
-filesystems, so if there are any modifications made to filesystem data and/or
-metadata on disks, we cannot bring them back to the state from before the
-modifications.  At the same time each hibernation image contains some
-filesystem-related information that must be consistent with the state of the
-on-disk data and metadata after the system memory state has been restored from
-the image (otherwise the filesystems will be damaged in a nasty way, usually
-making them almost impossible to repair).  We therefore freeze tasks that might
-cause the on-disk filesystems' data and metadata to be modified after the
-hibernation image has been created and before the system is finally powered off.
-The majority of these are user space processes, but if any of the kernel threads
-may cause something like this to happen, they have to be freezable.
+   hibernation.  At the moment we have no simple means of checkpointing
+   filesystems, so if there are any modifications made to filesystem data and/or
+   metadata on disks, we cannot bring them back to the state from before the
+   modifications.  At the same time each hibernation image contains some
+   filesystem-related information that must be consistent with the state of the
+   on-disk data and metadata after the system memory state has been restored
+   from the image (otherwise the filesystems will be damaged in a nasty way,
+   usually making them almost impossible to repair).  We therefore freeze
+   tasks that might cause the on-disk filesystems' data and metadata to be
+   modified after the hibernation image has been created and before the
+   system is finally powered off. The majority of these are user space
+   processes, but if any of the kernel threads may cause something like this
+   to happen, they have to be freezable.
 
 2. Next, to create the hibernation image we need to free a sufficient amount of
-memory (approximately 50% of available RAM) and we need to do that before
-devices are deactivated, because we generally need them for swapping out.  Then,
-after the memory for the image has been freed, we don't want tasks to allocate
-additional memory and we prevent them from doing that by freezing them earlier.
-[Of course, this also means that device drivers should not allocate substantial
-amounts of memory from their .suspend() callbacks before hibernation, but this
-is a separate issue.]
+   memory (approximately 50% of available RAM) and we need to do that before
+   devices are deactivated, because we generally need them for swapping out.
+   Then, after the memory for the image has been freed, we don't want tasks
+   to allocate additional memory and we prevent them from doing that by
+   freezing them earlier. [Of course, this also means that device drivers
+   should not allocate substantial amounts of memory from their .suspend()
+   callbacks before hibernation, but this is a separate issue.]
 
 3. The third reason is to prevent user space processes and some kernel threads
-from interfering with the suspending and resuming of devices.  A user space
-process running on a second CPU while we are suspending devices may, for
-example, be troublesome and without the freezing of tasks we would need some
-safeguards against race conditions that might occur in such a case.
+   from interfering with the suspending and resuming of devices.  A user space
+   process running on a second CPU while we are suspending devices may, for
+   example, be troublesome and without the freezing of tasks we would need some
+   safeguards against race conditions that might occur in such a case.
 
 Although Linus Torvalds doesn't like the freezing of tasks, he said this in one
 of the discussions on LKML (http://lkml.org/lkml/2007/4/27/608):
@@ -132,7 +140,7 @@ of the discussions on LKML (http://lkml.org/lkml/2007/4/27/608):
 
 Linus: In many ways, 'at all'.
 
-I _do_ realize the IO request queue issues, and that we cannot actually do
+I **do** realize the IO request queue issues, and that we cannot actually do
 s2ram with some devices in the middle of a DMA.  So we want to be able to
 avoid *that*, there's no question about that.  And I suspect that stopping
 user threads and then waiting for a sync is practically one of the easier
@@ -150,17 +158,18 @@ thawed after the driver's .resume() callback has run, so it won't be accessing
 the device while it's suspended.
 
 4. Another reason for freezing tasks is to prevent user space processes from
-realizing that hibernation (or suspend) operation takes place.  Ideally, user
-space processes should not notice that such a system-wide operation has occurred
-and should continue running without any problems after the restore (or resume
-from suspend).  Unfortunately, in the most general case this is quite difficult
-to achieve without the freezing of tasks.  Consider, for example, a process
-that depends on all CPUs being online while it's running.  Since we need to
-disable nonboot CPUs during the hibernation, if this process is not frozen, it
-may notice that the number of CPUs has changed and may start to work incorrectly
-because of that.
+   realizing that hibernation (or suspend) operation takes place.  Ideally, user
+   space processes should not notice that such a system-wide operation has
+   occurred and should continue running without any problems after the restore
+   (or resume from suspend).  Unfortunately, in the most general case this
+   is quite difficult to achieve without the freezing of tasks.  Consider,
+   for example, a process that depends on all CPUs being online while it's
+   running.  Since we need to disable nonboot CPUs during the hibernation,
+   if this process is not frozen, it may notice that the number of CPUs has
+   changed and may start to work incorrectly because of that.
 
 V. Are there any problems related to the freezing of tasks?
+===========================================================
 
 Yes, there are.
 
@@ -172,11 +181,12 @@ may be undesirable.  That's why kernel threads are not freezable by default.
 
 Second, there are the following two problems related to the freezing of user
 space processes:
+
 1. Putting processes into an uninterruptible sleep distorts the load average.
 2. Now that we have FUSE, plus the framework for doing device drivers in
-userspace, it gets even more complicated because some userspace processes are
-now doing the sorts of things that kernel threads do
-(https://lists.linux-foundation.org/pipermail/linux-pm/2007-May/012309.html).
+   userspace, it gets even more complicated because some userspace processes are
+   now doing the sorts of things that kernel threads do
+   (https://lists.linux-foundation.org/pipermail/linux-pm/2007-May/012309.html).
 
 The problem 1. seems to be fixable, although it hasn't been fixed so far.  The
 other one is more serious, but it seems that we can work around it by using
@@ -201,6 +211,7 @@ requested early enough using the suspend notifier API described in
 Documentation/driver-api/pm/notifiers.rst.
 
 VI. Are there any precautions to be taken to prevent freezing failures?
+=======================================================================
 
 Yes, there are.
 
@@ -226,6 +237,8 @@ So, to summarize, use [un]lock_system_sleep() instead of directly using
 mutex_[un]lock(&system_transition_mutex). That would prevent freezing failures.
 
 V. Miscellaneous
+================
+
 /sys/power/pm_freeze_timeout controls how long it will cost at most to freeze
 all user space processes or all freezable kernel threads, in unit of millisecond.
 The default value is 20000, with range of unsigned integer.
diff --git a/Documentation/power/index.rst b/Documentation/power/index.rst
new file mode 100644
index 000000000000..20415f21e48a
--- /dev/null
+++ b/Documentation/power/index.rst
@@ -0,0 +1,46 @@
+:orphan:
+
+================
+Power Management
+================
+
+.. toctree::
+    :maxdepth: 1
+
+    apm-acpi
+    basic-pm-debugging
+    charger-manager
+    drivers-testing
+    energy-model
+    freezing-of-tasks
+    interface
+    opp
+    pci
+    pm_qos_interface
+    power_supply_class
+    runtime_pm
+    s2ram
+    suspend-and-cpuhotplug
+    suspend-and-interrupts
+    swsusp-and-swap-files
+    swsusp-dmcrypt
+    swsusp
+    video
+    tricks
+
+    userland-swsusp
+
+    powercap/powercap
+
+    regulator/consumer
+    regulator/design
+    regulator/machine
+    regulator/overview
+    regulator/regulator
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.rst
similarity index 84%
rename from Documentation/power/interface.txt
rename to Documentation/power/interface.rst
index 27df7f98668a..8d270ed27228 100644
--- a/Documentation/power/interface.txt
+++ b/Documentation/power/interface.rst
@@ -1,4 +1,6 @@
+===========================================
 Power Management Interface for System Sleep
+===========================================
 
 Copyright (c) 2016 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 
@@ -11,10 +13,10 @@ mounted at /sys).
 
 Reading from it returns a list of supported sleep states, encoded as:
 
-'freeze' (Suspend-to-Idle)
-'standby' (Power-On Suspend)
-'mem' (Suspend-to-RAM)
-'disk' (Suspend-to-Disk)
+- 'freeze' (Suspend-to-Idle)
+- 'standby' (Power-On Suspend)
+- 'mem' (Suspend-to-RAM)
+- 'disk' (Suspend-to-Disk)
 
 Suspend-to-Idle is always supported.  Suspend-to-Disk is always supported
 too as long the kernel has been configured to support hibernation at all
@@ -32,18 +34,18 @@ Specifically, it tells the kernel what to do after creating a hibernation image.
 
 Reading from it returns a list of supported options encoded as:
 
-'platform' (put the system into sleep using a platform-provided method)
-'shutdown' (shut the system down)
-'reboot' (reboot the system)
-'suspend' (trigger a Suspend-to-RAM transition)
-'test_resume' (resume-after-hibernation test mode)
+- 'platform' (put the system into sleep using a platform-provided method)
+- 'shutdown' (shut the system down)
+- 'reboot' (reboot the system)
+- 'suspend' (trigger a Suspend-to-RAM transition)
+- 'test_resume' (resume-after-hibernation test mode)
 
 The currently selected option is printed in square brackets.
 
 The 'platform' option is only available if the platform provides a special
 mechanism to put the system to sleep after creating a hibernation image (ACPI
 does that, for example).  The 'suspend' option is available if Suspend-to-RAM
-is supported.  Refer to Documentation/power/basic-pm-debugging.txt for the
+is supported.  Refer to Documentation/power/basic-pm-debugging.rst for the
 description of the 'test_resume' option.
 
 To select an option, write the string representing it to /sys/power/disk.
@@ -71,7 +73,7 @@ If /sys/power/pm_trace contains '1', the fingerprint of each suspend/resume
 event point in turn will be stored in the RTC memory (overwriting the actual
 RTC information), so it will survive a system crash if one occurs right after
 storing it and it can be used later to identify the driver that caused the crash
-to happen (see Documentation/power/s2ram.txt for more information).
+to happen (see Documentation/power/s2ram.rst for more information).
 
 Initially it contains '0' which may be changed to '1' by writing a string
 representing a nonzero integer into it.
diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.rst
similarity index 78%
rename from Documentation/power/opp.txt
rename to Documentation/power/opp.rst
index 0c007e250cd1..b3cf1def9dee 100644
--- a/Documentation/power/opp.txt
+++ b/Documentation/power/opp.rst
@@ -1,20 +1,23 @@
+==========================================
 Operating Performance Points (OPP) Library
 ==========================================
 
 (C) 2009-2010 Nishanth Menon <nm@ti.com>, Texas Instruments Incorporated
 
-Contents
---------
-1. Introduction
-2. Initial OPP List Registration
-3. OPP Search Functions
-4. OPP Availability Control Functions
-5. OPP Data Retrieval Functions
-6. Data Structures
+.. Contents
+
+  1. Introduction
+  2. Initial OPP List Registration
+  3. OPP Search Functions
+  4. OPP Availability Control Functions
+  5. OPP Data Retrieval Functions
+  6. Data Structures
 
 1. Introduction
 ===============
+
 1.1 What is an Operating Performance Point (OPP)?
+-------------------------------------------------
 
 Complex SoCs of today consists of a multiple sub-modules working in conjunction.
 In an operational system executing varied use cases, not all modules in the SoC
@@ -28,16 +31,19 @@ the device will support per domain are called Operating Performance Points or
 OPPs.
 
 As an example:
+
 Let us consider an MPU device which supports the following:
 {300MHz at minimum voltage of 1V}, {800MHz at minimum voltage of 1.2V},
 {1GHz at minimum voltage of 1.3V}
 
 We can represent these as three OPPs as the following {Hz, uV} tuples:
-{300000000, 1000000}
-{800000000, 1200000}
-{1000000000, 1300000}
+
+- {300000000, 1000000}
+- {800000000, 1200000}
+- {1000000000, 1300000}
 
 1.2 Operating Performance Points Library
+----------------------------------------
 
 OPP library provides a set of helper functions to organize and query the OPP
 information. The library is located in drivers/base/power/opp.c and the header
@@ -46,9 +52,10 @@ CONFIG_PM_OPP from power management menuconfig menu. OPP library depends on
 CONFIG_PM as certain SoCs such as Texas Instrument's OMAP framework allows to
 optionally boot at a certain OPP without needing cpufreq.
 
-Typical usage of the OPP library is as follows:
-(users)		-> registers a set of default OPPs		-> (library)
-SoC framework	-> modifies on required cases certain OPPs	-> OPP layer
+Typical usage of the OPP library is as follows::
+
+ (users)	-> registers a set of default OPPs		-> (library)
+ SoC framework	-> modifies on required cases certain OPPs	-> OPP layer
 		-> queries to search/retrieve information	->
 
 OPP layer expects each domain to be represented by a unique device pointer. SoC
@@ -57,8 +64,9 @@ list is expected to be an optimally small number typically around 5 per device.
 This initial list contains a set of OPPs that the framework expects to be safely
 enabled by default in the system.
 
-Note on OPP Availability:
-------------------------
+Note on OPP Availability
+^^^^^^^^^^^^^^^^^^^^^^^^
+
 As the system proceeds to operate, SoC framework may choose to make certain
 OPPs available or not available on each device based on various external
 factors. Example usage: Thermal management or other exceptional situations where
@@ -88,7 +96,8 @@ registering the OPPs is maintained by OPP library throughout the device
 operation. The SoC framework can subsequently control the availability of the
 OPPs dynamically using the dev_pm_opp_enable / disable functions.
 
-dev_pm_opp_add - Add a new OPP for a specific domain represented by the device pointer.
+dev_pm_opp_add
+	Add a new OPP for a specific domain represented by the device pointer.
 	The OPP is defined using the frequency and voltage. Once added, the OPP
 	is assumed to be available and control of it's availability can be done
 	with the dev_pm_opp_enable/disable functions. OPP library internally stores
@@ -96,9 +105,11 @@ dev_pm_opp_add - Add a new OPP for a specific domain represented by the device p
 	used by SoC framework to define a optimal list as per the demands of
 	SoC usage environment.
 
-	WARNING: Do not use this function in interrupt context.
+	WARNING:
+		Do not use this function in interrupt context.
+
+	Example::
 
-	Example:
 	 soc_pm_init()
 	 {
 		/* Do things */
@@ -125,12 +136,15 @@ Callers of these functions shall call dev_pm_opp_put() after they have used the
 OPP. Otherwise the memory for the OPP will never get freed and result in
 memleak.
 
-dev_pm_opp_find_freq_exact - Search for an OPP based on an *exact* frequency and
+dev_pm_opp_find_freq_exact
+	Search for an OPP based on an *exact* frequency and
 	availability. This function is especially useful to enable an OPP which
 	is not available by default.
 	Example: In a case when SoC framework detects a situation where a
 	higher frequency could be made available, it can use this function to
-	find the OPP prior to call the dev_pm_opp_enable to actually make it available.
+	find the OPP prior to call the dev_pm_opp_enable to actually make
+	it available::
+
 	 opp = dev_pm_opp_find_freq_exact(dev, 1000000000, false);
 	 dev_pm_opp_put(opp);
 	 /* dont operate on the pointer.. just do a sanity check.. */
@@ -141,27 +155,34 @@ dev_pm_opp_find_freq_exact - Search for an OPP based on an *exact* frequency and
 		dev_pm_opp_enable(dev,1000000000);
 	 }
 
-	NOTE: This is the only search function that operates on OPPs which are
-	not available.
+	NOTE:
+	  This is the only search function that operates on OPPs which are
+	  not available.
 
-dev_pm_opp_find_freq_floor - Search for an available OPP which is *at most* the
+dev_pm_opp_find_freq_floor
+	Search for an available OPP which is *at most* the
 	provided frequency. This function is useful while searching for a lesser
 	match OR operating on OPP information in the order of decreasing
 	frequency.
-	Example: To find the highest opp for a device:
+	Example: To find the highest opp for a device::
+
 	 freq = ULONG_MAX;
 	 opp = dev_pm_opp_find_freq_floor(dev, &freq);
 	 dev_pm_opp_put(opp);
 
-dev_pm_opp_find_freq_ceil - Search for an available OPP which is *at least* the
+dev_pm_opp_find_freq_ceil
+	Search for an available OPP which is *at least* the
 	provided frequency. This function is useful while searching for a
 	higher match OR operating on OPP information in the order of increasing
 	frequency.
-	Example 1: To find the lowest opp for a device:
+	Example 1: To find the lowest opp for a device::
+
 	 freq = 0;
 	 opp = dev_pm_opp_find_freq_ceil(dev, &freq);
 	 dev_pm_opp_put(opp);
-	Example 2: A simplified implementation of a SoC cpufreq_driver->target:
+
+	Example 2: A simplified implementation of a SoC cpufreq_driver->target::
+
 	 soc_cpufreq_target(..)
 	 {
 		/* Do stuff like policy checks etc. */
@@ -184,12 +205,15 @@ fine grained dynamic control of which sets of OPPs are operationally available.
 These functions are intended to *temporarily* remove an OPP in conditions such
 as thermal considerations (e.g. don't use OPPx until the temperature drops).
 
-WARNING: Do not use these functions in interrupt context.
+WARNING:
+	Do not use these functions in interrupt context.
 
-dev_pm_opp_enable - Make a OPP available for operation.
+dev_pm_opp_enable
+	Make a OPP available for operation.
 	Example: Lets say that 1GHz OPP is to be made available only if the
 	SoC temperature is lower than a certain threshold. The SoC framework
-	implementation might choose to do something as follows:
+	implementation might choose to do something as follows::
+
 	 if (cur_temp < temp_low_thresh) {
 		/* Enable 1GHz if it was disabled */
 		opp = dev_pm_opp_find_freq_exact(dev, 1000000000, false);
@@ -201,10 +225,12 @@ dev_pm_opp_enable - Make a OPP available for operation.
 			goto try_something_else;
 	 }
 
-dev_pm_opp_disable - Make an OPP to be not available for operation
+dev_pm_opp_disable
+	Make an OPP to be not available for operation
 	Example: Lets say that 1GHz OPP is to be disabled if the temperature
 	exceeds a threshold value. The SoC framework implementation might
-	choose to do something as follows:
+	choose to do something as follows::
+
 	 if (cur_temp > temp_high_thresh) {
 		/* Disable 1GHz if it was enabled */
 		opp = dev_pm_opp_find_freq_exact(dev, 1000000000, true);
@@ -223,11 +249,13 @@ information from the OPP structure is necessary. Once an OPP pointer is
 retrieved using the search functions, the following functions can be used by SoC
 framework to retrieve the information represented inside the OPP layer.
 
-dev_pm_opp_get_voltage - Retrieve the voltage represented by the opp pointer.
+dev_pm_opp_get_voltage
+	Retrieve the voltage represented by the opp pointer.
 	Example: At a cpufreq transition to a different frequency, SoC
 	framework requires to set the voltage represented by the OPP using
 	the regulator framework to the Power Management chip providing the
-	voltage.
+	voltage::
+
 	 soc_switch_to_freq_voltage(freq)
 	 {
 		/* do things */
@@ -239,10 +267,12 @@ dev_pm_opp_get_voltage - Retrieve the voltage represented by the opp pointer.
 		/* do other things */
 	 }
 
-dev_pm_opp_get_freq - Retrieve the freq represented by the opp pointer.
+dev_pm_opp_get_freq
+	Retrieve the freq represented by the opp pointer.
 	Example: Lets say the SoC framework uses a couple of helper functions
 	we could pass opp pointers instead of doing additional parameters to
-	handle quiet a bit of data parameters.
+	handle quiet a bit of data parameters::
+
 	 soc_cpufreq_target(..)
 	 {
 		/* do things.. */
@@ -264,9 +294,11 @@ dev_pm_opp_get_freq - Retrieve the freq represented by the opp pointer.
 		/* do things.. */
 	 }
 
-dev_pm_opp_get_opp_count - Retrieve the number of available opps for a device
+dev_pm_opp_get_opp_count
+	Retrieve the number of available opps for a device
 	Example: Lets say a co-processor in the SoC needs to know the available
-	frequencies in a table, the main processor can notify as following:
+	frequencies in a table, the main processor can notify as following::
+
 	 soc_notify_coproc_available_frequencies()
 	 {
 		/* Do things */
@@ -289,54 +321,59 @@ dev_pm_opp_get_opp_count - Retrieve the number of available opps for a device
 ==================
 Typically an SoC contains multiple voltage domains which are variable. Each
 domain is represented by a device pointer. The relationship to OPP can be
-represented as follows:
-SoC
- |- device 1
- |	|- opp 1 (availability, freq, voltage)
- |	|- opp 2 ..
- ...	...
- |	`- opp n ..
- |- device 2
- ...
- `- device m
+represented as follows::
+
+  SoC
+   |- device 1
+   |	|- opp 1 (availability, freq, voltage)
+   |	|- opp 2 ..
+   ...	...
+   |	`- opp n ..
+   |- device 2
+   ...
+   `- device m
 
 OPP library maintains a internal list that the SoC framework populates and
 accessed by various functions as described above. However, the structures
 representing the actual OPPs and domains are internal to the OPP library itself
 to allow for suitable abstraction reusable across systems.
 
-struct dev_pm_opp - The internal data structure of OPP library which is used to
+struct dev_pm_opp
+	The internal data structure of OPP library which is used to
 	represent an OPP. In addition to the freq, voltage, availability
 	information, it also contains internal book keeping information required
 	for the OPP library to operate on.  Pointer to this structure is
 	provided back to the users such as SoC framework to be used as a
 	identifier for OPP in the interactions with OPP layer.
 
-	WARNING: The struct dev_pm_opp pointer should not be parsed or modified by the
-	users. The defaults of for an instance is populated by dev_pm_opp_add, but the
-	availability of the OPP can be modified by dev_pm_opp_enable/disable functions.
+	WARNING:
+	  The struct dev_pm_opp pointer should not be parsed or modified by the
+	  users. The defaults of for an instance is populated by
+	  dev_pm_opp_add, but the availability of the OPP can be modified
+	  by dev_pm_opp_enable/disable functions.
 
-struct device - This is used to identify a domain to the OPP layer. The
+struct device
+	This is used to identify a domain to the OPP layer. The
 	nature of the device and it's implementation is left to the user of
 	OPP library such as the SoC framework.
 
 Overall, in a simplistic view, the data structure operations is represented as
-following:
+following::
 
-Initialization / modification:
-            +-----+        /- dev_pm_opp_enable
-dev_pm_opp_add --> | opp | <-------
-  |         +-----+        \- dev_pm_opp_disable
-  \-------> domain_info(device)
+  Initialization / modification:
+              +-----+        /- dev_pm_opp_enable
+  dev_pm_opp_add --> | opp | <-------
+    |         +-----+        \- dev_pm_opp_disable
+    \-------> domain_info(device)
 
-Search functions:
-             /-- dev_pm_opp_find_freq_ceil  ---\   +-----+
-domain_info<---- dev_pm_opp_find_freq_exact -----> | opp |
-             \-- dev_pm_opp_find_freq_floor ---/   +-----+
+  Search functions:
+               /-- dev_pm_opp_find_freq_ceil  ---\   +-----+
+  domain_info<---- dev_pm_opp_find_freq_exact -----> | opp |
+               \-- dev_pm_opp_find_freq_floor ---/   +-----+
 
-Retrieval functions:
-+-----+     /- dev_pm_opp_get_voltage
-| opp | <---
-+-----+     \- dev_pm_opp_get_freq
+  Retrieval functions:
+  +-----+     /- dev_pm_opp_get_voltage
+  | opp | <---
+  +-----+     \- dev_pm_opp_get_freq
 
-domain_info <- dev_pm_opp_get_opp_count
+  domain_info <- dev_pm_opp_get_opp_count
diff --git a/Documentation/power/pci.txt b/Documentation/power/pci.rst
similarity index 97%
rename from Documentation/power/pci.txt
rename to Documentation/power/pci.rst
index 8eaf9ee24d43..0e2ef7429304 100644
--- a/Documentation/power/pci.txt
+++ b/Documentation/power/pci.rst
@@ -1,4 +1,6 @@
+====================
 PCI Power Management
+====================
 
 Copyright (c) 2010 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
 
@@ -9,14 +11,14 @@ management.  Based on previous work by Patrick Mochel <mochel@transmeta.com>
 This document only covers the aspects of power management specific to PCI
 devices.  For general description of the kernel's interfaces related to device
 power management refer to Documentation/driver-api/pm/devices.rst and
-Documentation/power/runtime_pm.txt.
+Documentation/power/runtime_pm.rst.
 
----------------------------------------------------------------------------
+.. contents:
 
-1. Hardware and Platform Support for PCI Power Management
-2. PCI Subsystem and Device Power Management
-3. PCI Device Drivers and Power Management
-4. Resources
+   1. Hardware and Platform Support for PCI Power Management
+   2. PCI Subsystem and Device Power Management
+   3. PCI Device Drivers and Power Management
+   4. Resources
 
 
 1. Hardware and Platform Support for PCI Power Management
@@ -24,6 +26,7 @@ Documentation/power/runtime_pm.txt.
 
 1.1. Native and Platform-Based Power Management
 -----------------------------------------------
+
 In general, power management is a feature allowing one to save energy by putting
 devices into states in which they draw less power (low-power states) at the
 price of reduced functionality or performance.
@@ -67,6 +70,7 @@ mechanisms have to be used simultaneously to obtain the desired result.
 
 1.2. Native PCI Power Management
 --------------------------------
+
 The PCI Bus Power Management Interface Specification (PCI PM Spec) was
 introduced between the PCI 2.1 and PCI 2.2 Specifications.  It defined a
 standard interface for performing various operations related to power
@@ -134,6 +138,7 @@ sufficiently active to generate a wakeup signal.
 
 1.3. ACPI Device Power Management
 ---------------------------------
+
 The platform firmware support for the power management of PCI devices is
 system-specific.  However, if the system in question is compliant with the
 Advanced Configuration and Power Interface (ACPI) Specification, like the
@@ -194,6 +199,7 @@ enabled for the device to be able to generate wakeup signals.
 
 1.4. Wakeup Signaling
 ---------------------
+
 Wakeup signals generated by PCI devices, either as native PCI PMEs, or as
 a result of the execution of the _DSW (or _PSW) ACPI control method before
 putting the device into a low-power state, have to be caught and handled as
@@ -265,14 +271,15 @@ the native PCI Express PME signaling cannot be used by the kernel in that case.
 
 2.1. Device Power Management Callbacks
 --------------------------------------
+
 The PCI Subsystem participates in the power management of PCI devices in a
 number of ways.  First of all, it provides an intermediate code layer between
 the device power management core (PM core) and PCI device drivers.
 Specifically, the pm field of the PCI subsystem's struct bus_type object,
 pci_bus_type, points to a struct dev_pm_ops object, pci_dev_pm_ops, containing
-pointers to several device power management callbacks:
+pointers to several device power management callbacks::
 
-const struct dev_pm_ops pci_dev_pm_ops = {
+  const struct dev_pm_ops pci_dev_pm_ops = {
 	.prepare = pci_pm_prepare,
 	.complete = pci_pm_complete,
 	.suspend = pci_pm_suspend,
@@ -290,7 +297,7 @@ const struct dev_pm_ops pci_dev_pm_ops = {
 	.runtime_suspend = pci_pm_runtime_suspend,
 	.runtime_resume = pci_pm_runtime_resume,
 	.runtime_idle = pci_pm_runtime_idle,
-};
+  };
 
 These callbacks are executed by the PM core in various situations related to
 device power management and they, in turn, execute power management callbacks
@@ -299,9 +306,9 @@ involving some standard configuration registers of PCI devices that device
 drivers need not know or care about.
 
 The structure representing a PCI device, struct pci_dev, contains several fields
-that these callbacks operate on:
+that these callbacks operate on::
 
-struct pci_dev {
+  struct pci_dev {
 	...
 	pci_power_t     current_state;  /* Current operating state. */
 	int		pm_cap;		/* PM capability offset in the
@@ -315,13 +322,14 @@ struct pci_dev {
 	unsigned int	wakeup_prepared:1;  /* Device prepared for wake up */
 	unsigned int	d3_delay;	/* D3->D0 transition time in ms */
 	...
-};
+  };
 
 They also indirectly use some fields of the struct device that is embedded in
 struct pci_dev.
 
 2.2. Device Initialization
 --------------------------
+
 The PCI subsystem's first task related to device power management is to
 prepare the device for power management and initialize the fields of struct
 pci_dev used for this purpose.  This happens in two functions defined in
@@ -348,10 +356,11 @@ during system-wide transitions to a sleep state and back to the working state.
 
 2.3. Runtime Device Power Management
 ------------------------------------
+
 The PCI subsystem plays a vital role in the runtime power management of PCI
 devices.  For this purpose it uses the general runtime power management
-(runtime PM) framework described in Documentation/power/runtime_pm.txt.
-Namely, it provides subsystem-level callbacks:
+(runtime PM) framework described in Documentation/power/runtime_pm.rst.
+Namely, it provides subsystem-level callbacks::
 
 	pci_pm_runtime_suspend()
 	pci_pm_runtime_resume()
@@ -425,13 +434,14 @@ to the given subsystem before the next phase begins.  These phases always run
 after tasks have been frozen.
 
 2.4.1. System Suspend
+^^^^^^^^^^^^^^^^^^^^^
 
 When the system is going into a sleep state in which the contents of memory will
 be preserved, such as one of the ACPI sleep states S1-S3, the phases are:
 
 	prepare, suspend, suspend_noirq.
 
-The following PCI bus type's callbacks, respectively, are used in these phases:
+The following PCI bus type's callbacks, respectively, are used in these phases::
 
 	pci_pm_prepare()
 	pci_pm_suspend()
@@ -492,6 +502,7 @@ this purpose).  PCI device drivers are not encouraged to do that, but in some
 rare cases doing that in the driver may be the optimum approach.
 
 2.4.2. System Resume
+^^^^^^^^^^^^^^^^^^^^
 
 When the system is undergoing a transition from a sleep state in which the
 contents of memory have been preserved, such as one of the ACPI sleep states
@@ -500,7 +511,7 @@ S1-S3, into the working state (ACPI S0), the phases are:
 	resume_noirq, resume, complete.
 
 The following PCI bus type's callbacks, respectively, are executed in these
-phases:
+phases::
 
 	pci_pm_resume_noirq()
 	pci_pm_resume()
@@ -539,6 +550,7 @@ The pci_pm_complete() routine only executes the device driver's pm->complete()
 callback, if defined.
 
 2.4.3. System Hibernation
+^^^^^^^^^^^^^^^^^^^^^^^^^
 
 System hibernation is more complicated than system suspend, because it requires
 a system image to be created and written into a persistent storage medium.  The
@@ -551,7 +563,7 @@ to be free) in the following three phases:
 
 	prepare, freeze, freeze_noirq
 
-that correspond to the PCI bus type's callbacks:
+that correspond to the PCI bus type's callbacks::
 
 	pci_pm_prepare()
 	pci_pm_freeze()
@@ -580,7 +592,7 @@ back to the fully functional state and this is done in the following phases:
 
 	thaw_noirq, thaw, complete
 
-using the following PCI bus type's callbacks:
+using the following PCI bus type's callbacks::
 
 	pci_pm_thaw_noirq()
 	pci_pm_thaw()
@@ -608,7 +620,7 @@ three phases:
 
 where the prepare phase is exactly the same as for system suspend.  The other
 two phases are analogous to the suspend and suspend_noirq phases, respectively.
-The PCI subsystem-level callbacks they correspond to
+The PCI subsystem-level callbacks they correspond to::
 
 	pci_pm_poweroff()
 	pci_pm_poweroff_noirq()
@@ -618,6 +630,7 @@ although they don't attempt to save the device's standard configuration
 registers.
 
 2.4.4. System Restore
+^^^^^^^^^^^^^^^^^^^^^
 
 System restore requires a hibernation image to be loaded into memory and the
 pre-hibernation memory contents to be restored before the pre-hibernation system
@@ -653,7 +666,7 @@ phases:
 
 The first two of these are analogous to the resume_noirq and resume phases
 described above, respectively, and correspond to the following PCI subsystem
-callbacks:
+callbacks::
 
 	pci_pm_restore_noirq()
 	pci_pm_restore()
@@ -671,6 +684,7 @@ resume.
 
 3.1. Power Management Callbacks
 -------------------------------
+
 PCI device drivers participate in power management by providing callbacks to be
 executed by the PCI subsystem's power management routines described above and by
 controlling the runtime power management of their devices.
@@ -698,6 +712,7 @@ defined, though, they are expected to behave as described in the following
 subsections.
 
 3.1.1. prepare()
+^^^^^^^^^^^^^^^^
 
 The prepare() callback is executed during system suspend, during hibernation
 (when a hibernation image is about to be created), during power-off after
@@ -716,6 +731,7 @@ preallocated earlier, for example in a suspend/hibernate notifier as described
 in Documentation/driver-api/pm/notifiers.rst).
 
 3.1.2. suspend()
+^^^^^^^^^^^^^^^^
 
 The suspend() callback is only executed during system suspend, after prepare()
 callbacks have been executed for all devices in the system.
@@ -742,6 +758,7 @@ operations relying on the driver's ability to handle interrupts should be
 carried out in this callback.
 
 3.1.3. suspend_noirq()
+^^^^^^^^^^^^^^^^^^^^^^
 
 The suspend_noirq() callback is only executed during system suspend, after
 suspend() callbacks have been executed for all devices in the system and
@@ -753,6 +770,7 @@ suspend_noirq() can carry out operations that would cause race conditions to
 arise if they were performed in suspend().
 
 3.1.4. freeze()
+^^^^^^^^^^^^^^^
 
 The freeze() callback is hibernation-specific and is executed in two situations,
 during hibernation, after prepare() callbacks have been executed for all devices
@@ -770,6 +788,7 @@ or put it into a low-power state.  Still, either it or freeze_noirq() should
 save the device's standard configuration registers using pci_save_state().
 
 3.1.5. freeze_noirq()
+^^^^^^^^^^^^^^^^^^^^^
 
 The freeze_noirq() callback is hibernation-specific.  It is executed during
 hibernation, after prepare() and freeze() callbacks have been executed for all
@@ -786,6 +805,7 @@ The difference between freeze_noirq() and freeze() is analogous to the
 difference between suspend_noirq() and suspend().
 
 3.1.6. poweroff()
+^^^^^^^^^^^^^^^^^
 
 The poweroff() callback is hibernation-specific.  It is executed when the system
 is about to be powered off after saving a hibernation image to a persistent
@@ -802,6 +822,7 @@ into a low-power state, respectively, but it need not save the device's standard
 configuration registers.
 
 3.1.7. poweroff_noirq()
+^^^^^^^^^^^^^^^^^^^^^^^
 
 The poweroff_noirq() callback is hibernation-specific.  It is executed after
 poweroff() callbacks have been executed for all devices in the system.
@@ -814,6 +835,7 @@ The difference between poweroff_noirq() and poweroff() is analogous to the
 difference between suspend_noirq() and suspend().
 
 3.1.8. resume_noirq()
+^^^^^^^^^^^^^^^^^^^^^
 
 The resume_noirq() callback is only executed during system resume, after the
 PM core has enabled the non-boot CPUs.  The driver's interrupt handler will not
@@ -827,6 +849,7 @@ it should only be used for performing operations that would lead to race
 conditions if carried out by resume().
 
 3.1.9. resume()
+^^^^^^^^^^^^^^^
 
 The resume() callback is only executed during system resume, after
 resume_noirq() callbacks have been executed for all devices in the system and
@@ -837,6 +860,7 @@ device and bringing it back to the fully functional state.  The device should be
 able to process I/O in a usual way after resume() has returned.
 
 3.1.10. thaw_noirq()
+^^^^^^^^^^^^^^^^^^^^
 
 The thaw_noirq() callback is hibernation-specific.  It is executed after a
 system image has been created and the non-boot CPUs have been enabled by the PM
@@ -851,6 +875,7 @@ freeze() and freeze_noirq(), so in general it does not need to modify the
 contents of the device's registers.
 
 3.1.11. thaw()
+^^^^^^^^^^^^^^
 
 The thaw() callback is hibernation-specific.  It is executed after thaw_noirq()
 callbacks have been executed for all devices in the system and after device
@@ -860,6 +885,7 @@ This callback is responsible for restoring the pre-freeze configuration of
 the device, so that it will work in a usual way after thaw() has returned.
 
 3.1.12. restore_noirq()
+^^^^^^^^^^^^^^^^^^^^^^^
 
 The restore_noirq() callback is hibernation-specific.  It is executed in the
 restore_noirq phase of hibernation, when the boot kernel has passed control to
@@ -875,6 +901,7 @@ For the vast majority of PCI device drivers there is no difference between
 resume_noirq() and restore_noirq().
 
 3.1.13. restore()
+^^^^^^^^^^^^^^^^^
 
 The restore() callback is hibernation-specific.  It is executed after
 restore_noirq() callbacks have been executed for all devices in the system and
@@ -888,14 +915,17 @@ For the vast majority of PCI device drivers there is no difference between
 resume() and restore().
 
 3.1.14. complete()
+^^^^^^^^^^^^^^^^^^
 
 The complete() callback is executed in the following situations:
+
   - during system resume, after resume() callbacks have been executed for all
     devices,
   - during hibernation, before saving the system image, after thaw() callbacks
     have been executed for all devices,
   - during system restore, when the system is going back to its pre-hibernation
     state, after restore() callbacks have been executed for all devices.
+
 It also may be executed if the loading of a hibernation image into memory fails
 (in that case it is run after thaw() callbacks have been executed for all
 devices that have drivers in the boot kernel).
@@ -904,6 +934,7 @@ This callback is entirely optional, although it may be necessary if the
 prepare() callback performs operations that need to be reversed.
 
 3.1.15. runtime_suspend()
+^^^^^^^^^^^^^^^^^^^^^^^^^
 
 The runtime_suspend() callback is specific to device runtime power management
 (runtime PM).  It is executed by the PM core's runtime PM framework when the
@@ -915,6 +946,7 @@ put into a low-power state, but it must allow the PCI subsystem to perform all
 of the PCI-specific actions necessary for suspending the device.
 
 3.1.16. runtime_resume()
+^^^^^^^^^^^^^^^^^^^^^^^^
 
 The runtime_resume() callback is specific to device runtime PM.  It is executed
 by the PM core's runtime PM framework when the device is about to be resumed
@@ -927,6 +959,7 @@ The device is expected to be able to process I/O in the usual way after
 runtime_resume() has returned.
 
 3.1.17. runtime_idle()
+^^^^^^^^^^^^^^^^^^^^^^
 
 The runtime_idle() callback is specific to device runtime PM.  It is executed
 by the PM core's runtime PM framework whenever it may be desirable to suspend
@@ -939,6 +972,7 @@ PCI subsystem will call pm_runtime_suspend() for the device, which in turn will
 cause the driver's runtime_suspend() callback to be executed.
 
 3.1.18. Pointing Multiple Callback Pointers to One Routine
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Although in principle each of the callbacks described in the previous
 subsections can be defined as a separate function, it often is convenient to
@@ -962,6 +996,7 @@ dev_pm_ops to indicate that one suspend routine is to be pointed to by the
 be pointed to by the .resume(), .thaw(), and .restore() members.
 
 3.1.19. Driver Flags for Power Management
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 The PM core allows device drivers to set flags that influence the handling of
 power management for the devices by the core itself and by middle layer code
@@ -1007,6 +1042,7 @@ it.
 
 3.2. Device Runtime Power Management
 ------------------------------------
+
 In addition to providing device power management callbacks PCI device drivers
 are responsible for controlling the runtime power management (runtime PM) of
 their devices.
@@ -1073,22 +1109,27 @@ device the PM core automatically queues a request to check if the device is
 idle), device drivers are generally responsible for queuing power management
 requests for their devices.  For this purpose they should use the runtime PM
 helper functions provided by the PM core, discussed in
-Documentation/power/runtime_pm.txt.
+Documentation/power/runtime_pm.rst.
 
 Devices can also be suspended and resumed synchronously, without placing a
 request into pm_wq.  In the majority of cases this also is done by their
 drivers that use helper functions provided by the PM core for this purpose.
 
 For more information on the runtime PM of devices refer to
-Documentation/power/runtime_pm.txt.
+Documentation/power/runtime_pm.rst.
 
 
 4. Resources
 ============
 
 PCI Local Bus Specification, Rev. 3.0
+
 PCI Bus Power Management Interface Specification, Rev. 1.2
+
 Advanced Configuration and Power Interface (ACPI) Specification, Rev. 3.0b
+
 PCI Express Base Specification, Rev. 2.0
+
 Documentation/driver-api/pm/devices.rst
-Documentation/power/runtime_pm.txt
+
+Documentation/power/runtime_pm.rst
diff --git a/Documentation/power/pm_qos_interface.txt b/Documentation/power/pm_qos_interface.rst
similarity index 62%
rename from Documentation/power/pm_qos_interface.txt
rename to Documentation/power/pm_qos_interface.rst
index 19c5f7b1a7ba..945fc6d760c9 100644
--- a/Documentation/power/pm_qos_interface.txt
+++ b/Documentation/power/pm_qos_interface.rst
@@ -1,4 +1,6 @@
-PM Quality Of Service Interface.
+===============================
+PM Quality Of Service Interface
+===============================
 
 This interface provides a kernel and user mode interface for registering
 performance expectations by drivers, subsystems and user space applications on
@@ -11,6 +13,7 @@ memory_bandwidth.
 constraints and PM QoS flags.
 
 Each parameters have defined units:
+
  * latency: usec
  * timeout: usec
  * throughput: kbs (kilo bit / sec)
@@ -18,6 +21,7 @@ Each parameters have defined units:
 
 
 1. PM QoS framework
+===================
 
 The infrastructure exposes multiple misc device nodes one per implemented
 parameter.  The set of parameters implement is defined by pm_qos_power_init()
@@ -37,38 +41,39 @@ reading the aggregated value does not require any locking mechanism.
 From kernel mode the use of this interface is simple:
 
 void pm_qos_add_request(handle, param_class, target_value):
-Will insert an element into the list for that identified PM QoS class with the
-target value.  Upon change to this list the new target is recomputed and any
-registered notifiers are called only if the target value is now different.
-Clients of pm_qos need to save the returned handle for future use in other
-pm_qos API functions.
+  Will insert an element into the list for that identified PM QoS class with the
+  target value.  Upon change to this list the new target is recomputed and any
+  registered notifiers are called only if the target value is now different.
+  Clients of pm_qos need to save the returned handle for future use in other
+  pm_qos API functions.
 
 void pm_qos_update_request(handle, new_target_value):
-Will update the list element pointed to by the handle with the new target value
-and recompute the new aggregated target, calling the notification tree if the
-target is changed.
+  Will update the list element pointed to by the handle with the new target value
+  and recompute the new aggregated target, calling the notification tree if the
+  target is changed.
 
 void pm_qos_remove_request(handle):
-Will remove the element.  After removal it will update the aggregate target and
-call the notification tree if the target was changed as a result of removing
-the request.
+  Will remove the element.  After removal it will update the aggregate target and
+  call the notification tree if the target was changed as a result of removing
+  the request.
 
 int pm_qos_request(param_class):
-Returns the aggregated value for a given PM QoS class.
+  Returns the aggregated value for a given PM QoS class.
 
 int pm_qos_request_active(handle):
-Returns if the request is still active, i.e. it has not been removed from a
-PM QoS class constraints list.
+  Returns if the request is still active, i.e. it has not been removed from a
+  PM QoS class constraints list.
 
 int pm_qos_add_notifier(param_class, notifier):
-Adds a notification callback function to the PM QoS class. The callback is
-called when the aggregated value for the PM QoS class is changed.
+  Adds a notification callback function to the PM QoS class. The callback is
+  called when the aggregated value for the PM QoS class is changed.
 
 int pm_qos_remove_notifier(int param_class, notifier):
-Removes the notification callback function for the PM QoS class.
+  Removes the notification callback function for the PM QoS class.
 
 
 From user mode:
+
 Only processes can register a pm_qos request.  To provide for automatic
 cleanup of a process, the interface requires the process to register its
 parameter requests in the following way:
@@ -89,6 +94,7 @@ node.
 
 
 2. PM QoS per-device latency and flags framework
+================================================
 
 For each device, there are three lists of PM QoS requests. Two of them are
 maintained along with the aggregated targets of resume latency and active
@@ -107,73 +113,80 @@ the aggregated value does not require any locking mechanism.
 From kernel mode the use of this interface is the following:
 
 int dev_pm_qos_add_request(device, handle, type, value):
-Will insert an element into the list for that identified device with the
-target value.  Upon change to this list the new target is recomputed and any
-registered notifiers are called only if the target value is now different.
-Clients of dev_pm_qos need to save the handle for future use in other
-dev_pm_qos API functions.
+  Will insert an element into the list for that identified device with the
+  target value.  Upon change to this list the new target is recomputed and any
+  registered notifiers are called only if the target value is now different.
+  Clients of dev_pm_qos need to save the handle for future use in other
+  dev_pm_qos API functions.
 
 int dev_pm_qos_update_request(handle, new_value):
-Will update the list element pointed to by the handle with the new target value
-and recompute the new aggregated target, calling the notification trees if the
-target is changed.
+  Will update the list element pointed to by the handle with the new target
+  value and recompute the new aggregated target, calling the notification
+  trees if the target is changed.
 
 int dev_pm_qos_remove_request(handle):
-Will remove the element.  After removal it will update the aggregate target and
-call the notification trees if the target was changed as a result of removing
-the request.
+  Will remove the element.  After removal it will update the aggregate target
+  and call the notification trees if the target was changed as a result of
+  removing the request.
 
 s32 dev_pm_qos_read_value(device):
-Returns the aggregated value for a given device's constraints list.
+  Returns the aggregated value for a given device's constraints list.
 
 enum pm_qos_flags_status dev_pm_qos_flags(device, mask)
-Check PM QoS flags of the given device against the given mask of flags.
-The meaning of the return values is as follows:
-	PM_QOS_FLAGS_ALL: All flags from the mask are set
-	PM_QOS_FLAGS_SOME: Some flags from the mask are set
-	PM_QOS_FLAGS_NONE: No flags from the mask are set
-	PM_QOS_FLAGS_UNDEFINED: The device's PM QoS structure has not been
-			initialized or the list of requests is empty.
+  Check PM QoS flags of the given device against the given mask of flags.
+  The meaning of the return values is as follows:
+
+	PM_QOS_FLAGS_ALL:
+		All flags from the mask are set
+	PM_QOS_FLAGS_SOME:
+		Some flags from the mask are set
+	PM_QOS_FLAGS_NONE:
+		No flags from the mask are set
+	PM_QOS_FLAGS_UNDEFINED:
+		The device's PM QoS structure has not been initialized
+		or the list of requests is empty.
 
 int dev_pm_qos_add_ancestor_request(dev, handle, type, value)
-Add a PM QoS request for the first direct ancestor of the given device whose
-power.ignore_children flag is unset (for DEV_PM_QOS_RESUME_LATENCY requests)
-or whose power.set_latency_tolerance callback pointer is not NULL (for
-DEV_PM_QOS_LATENCY_TOLERANCE requests).
+  Add a PM QoS request for the first direct ancestor of the given device whose
+  power.ignore_children flag is unset (for DEV_PM_QOS_RESUME_LATENCY requests)
+  or whose power.set_latency_tolerance callback pointer is not NULL (for
+  DEV_PM_QOS_LATENCY_TOLERANCE requests).
 
 int dev_pm_qos_expose_latency_limit(device, value)
-Add a request to the device's PM QoS list of resume latency constraints and
-create a sysfs attribute pm_qos_resume_latency_us under the device's power
-directory allowing user space to manipulate that request.
+  Add a request to the device's PM QoS list of resume latency constraints and
+  create a sysfs attribute pm_qos_resume_latency_us under the device's power
+  directory allowing user space to manipulate that request.
 
 void dev_pm_qos_hide_latency_limit(device)
-Drop the request added by dev_pm_qos_expose_latency_limit() from the device's
-PM QoS list of resume latency constraints and remove sysfs attribute
-pm_qos_resume_latency_us from the device's power directory.
+  Drop the request added by dev_pm_qos_expose_latency_limit() from the device's
+  PM QoS list of resume latency constraints and remove sysfs attribute
+  pm_qos_resume_latency_us from the device's power directory.
 
 int dev_pm_qos_expose_flags(device, value)
-Add a request to the device's PM QoS list of flags and create sysfs attribute
-pm_qos_no_power_off under the device's power directory allowing user space to
-change the value of the PM_QOS_FLAG_NO_POWER_OFF flag.
+  Add a request to the device's PM QoS list of flags and create sysfs attribute
+  pm_qos_no_power_off under the device's power directory allowing user space to
+  change the value of the PM_QOS_FLAG_NO_POWER_OFF flag.
 
 void dev_pm_qos_hide_flags(device)
-Drop the request added by dev_pm_qos_expose_flags() from the device's PM QoS list
-of flags and remove sysfs attribute pm_qos_no_power_off from the device's power
-directory.
+  Drop the request added by dev_pm_qos_expose_flags() from the device's PM QoS list
+  of flags and remove sysfs attribute pm_qos_no_power_off from the device's power
+  directory.
 
 Notification mechanisms:
+
 The per-device PM QoS framework has a per-device notification tree.
 
 int dev_pm_qos_add_notifier(device, notifier):
-Adds a notification callback function for the device.
-The callback is called when the aggregated value of the device constraints list
-is changed (for resume latency device PM QoS only).
+  Adds a notification callback function for the device.
+  The callback is called when the aggregated value of the device constraints list
+  is changed (for resume latency device PM QoS only).
 
 int dev_pm_qos_remove_notifier(device, notifier):
-Removes the notification callback function for the device.
+  Removes the notification callback function for the device.
 
 
 Active state latency tolerance
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 This device PM QoS type is used to support systems in which hardware may switch
 to energy-saving operation modes on the fly.  In those systems, if the operation
diff --git a/Documentation/power/power_supply_class.rst b/Documentation/power/power_supply_class.rst
new file mode 100644
index 000000000000..3f2c3fe38a61
--- /dev/null
+++ b/Documentation/power/power_supply_class.rst
@@ -0,0 +1,282 @@
+========================
+Linux power supply class
+========================
+
+Synopsis
+~~~~~~~~
+Power supply class used to represent battery, UPS, AC or DC power supply
+properties to user-space.
+
+It defines core set of attributes, which should be applicable to (almost)
+every power supply out there. Attributes are available via sysfs and uevent
+interfaces.
+
+Each attribute has well defined meaning, up to unit of measure used. While
+the attributes provided are believed to be universally applicable to any
+power supply, specific monitoring hardware may not be able to provide them
+all, so any of them may be skipped.
+
+Power supply class is extensible, and allows to define drivers own attributes.
+The core attribute set is subject to the standard Linux evolution (i.e.
+if it will be found that some attribute is applicable to many power supply
+types or their drivers, it can be added to the core set).
+
+It also integrates with LED framework, for the purpose of providing
+typically expected feedback of battery charging/fully charged status and
+AC/USB power supply online status. (Note that specific details of the
+indication (including whether to use it at all) are fully controllable by
+user and/or specific machine defaults, per design principles of LED
+framework).
+
+
+Attributes/properties
+~~~~~~~~~~~~~~~~~~~~~
+Power supply class has predefined set of attributes, this eliminates code
+duplication across drivers. Power supply class insist on reusing its
+predefined attributes *and* their units.
+
+So, userspace gets predictable set of attributes and their units for any
+kind of power supply, and can process/present them to a user in consistent
+manner. Results for different power supplies and machines are also directly
+comparable.
+
+See drivers/power/supply/ds2760_battery.c and drivers/power/supply/pda_power.c
+for the example how to declare and handle attributes.
+
+
+Units
+~~~~~
+Quoting include/linux/power_supply.h:
+
+  All voltages, currents, charges, energies, time and temperatures in µV,
+  µA, µAh, µWh, seconds and tenths of degree Celsius unless otherwise
+  stated. It's driver's job to convert its raw values to units in which
+  this class operates.
+
+
+Attributes/properties detailed
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
++--------------------------------------------------------------------------+
+|               **Charge/Energy/Capacity - how to not confuse**            |
++--------------------------------------------------------------------------+
+| **Because both "charge" (µAh) and "energy" (µWh) represents "capacity"   |
+| of battery, this class distinguish these terms. Don't mix them!**        |
+|                                                                          |
+| - `CHARGE_*`                                                             |
+|	attributes represents capacity in µAh only.                        |
+| - `ENERGY_*`                                                             |
+|	attributes represents capacity in µWh only.                        |
+| - `CAPACITY`                                                             |
+|	attribute represents capacity in *percents*, from 0 to 100.        |
++--------------------------------------------------------------------------+
+
+Postfixes:
+
+_AVG
+  *hardware* averaged value, use it if your hardware is really able to
+  report averaged values.
+_NOW
+  momentary/instantaneous values.
+
+STATUS
+  this attribute represents operating status (charging, full,
+  discharging (i.e. powering a load), etc.). This corresponds to
+  `BATTERY_STATUS_*` values, as defined in battery.h.
+
+CHARGE_TYPE
+  batteries can typically charge at different rates.
+  This defines trickle and fast charges.  For batteries that
+  are already charged or discharging, 'n/a' can be displayed (or
+  'unknown', if the status is not known).
+
+AUTHENTIC
+  indicates the power supply (battery or charger) connected
+  to the platform is authentic(1) or non authentic(0).
+
+HEALTH
+  represents health of the battery, values corresponds to
+  POWER_SUPPLY_HEALTH_*, defined in battery.h.
+
+VOLTAGE_OCV
+  open circuit voltage of the battery.
+
+VOLTAGE_MAX_DESIGN, VOLTAGE_MIN_DESIGN
+  design values for maximal and minimal power supply voltages.
+  Maximal/minimal means values of voltages when battery considered
+  "full"/"empty" at normal conditions. Yes, there is no direct relation
+  between voltage and battery capacity, but some dumb
+  batteries use voltage for very approximated calculation of capacity.
+  Battery driver also can use this attribute just to inform userspace
+  about maximal and minimal voltage thresholds of a given battery.
+
+VOLTAGE_MAX, VOLTAGE_MIN
+  same as _DESIGN voltage values except that these ones should be used
+  if hardware could only guess (measure and retain) the thresholds of a
+  given power supply.
+
+VOLTAGE_BOOT
+  Reports the voltage measured during boot
+
+CURRENT_BOOT
+  Reports the current measured during boot
+
+CHARGE_FULL_DESIGN, CHARGE_EMPTY_DESIGN
+  design charge values, when battery considered full/empty.
+
+ENERGY_FULL_DESIGN, ENERGY_EMPTY_DESIGN
+  same as above but for energy.
+
+CHARGE_FULL, CHARGE_EMPTY
+  These attributes means "last remembered value of charge when battery
+  became full/empty". It also could mean "value of charge when battery
+  considered full/empty at given conditions (temperature, age)".
+  I.e. these attributes represents real thresholds, not design values.
+
+ENERGY_FULL, ENERGY_EMPTY
+  same as above but for energy.
+
+CHARGE_COUNTER
+  the current charge counter (in µAh).  This could easily
+  be negative; there is no empty or full value.  It is only useful for
+  relative, time-based measurements.
+
+PRECHARGE_CURRENT
+  the maximum charge current during precharge phase of charge cycle
+  (typically 20% of battery capacity).
+
+CHARGE_TERM_CURRENT
+  Charge termination current. The charge cycle terminates when battery
+  voltage is above recharge threshold, and charge current is below
+  this setting (typically 10% of battery capacity).
+
+CONSTANT_CHARGE_CURRENT
+  constant charge current programmed by charger.
+
+
+CONSTANT_CHARGE_CURRENT_MAX
+  maximum charge current supported by the power supply object.
+
+CONSTANT_CHARGE_VOLTAGE
+  constant charge voltage programmed by charger.
+CONSTANT_CHARGE_VOLTAGE_MAX
+  maximum charge voltage supported by the power supply object.
+
+INPUT_CURRENT_LIMIT
+  input current limit programmed by charger. Indicates
+  the current drawn from a charging source.
+
+CHARGE_CONTROL_LIMIT
+  current charge control limit setting
+CHARGE_CONTROL_LIMIT_MAX
+  maximum charge control limit setting
+
+CALIBRATE
+  battery or coulomb counter calibration status
+
+CAPACITY
+  capacity in percents.
+CAPACITY_ALERT_MIN
+  minimum capacity alert value in percents.
+CAPACITY_ALERT_MAX
+  maximum capacity alert value in percents.
+CAPACITY_LEVEL
+  capacity level. This corresponds to POWER_SUPPLY_CAPACITY_LEVEL_*.
+
+TEMP
+  temperature of the power supply.
+TEMP_ALERT_MIN
+  minimum battery temperature alert.
+TEMP_ALERT_MAX
+  maximum battery temperature alert.
+TEMP_AMBIENT
+  ambient temperature.
+TEMP_AMBIENT_ALERT_MIN
+  minimum ambient temperature alert.
+TEMP_AMBIENT_ALERT_MAX
+  maximum ambient temperature alert.
+TEMP_MIN
+  minimum operatable temperature
+TEMP_MAX
+  maximum operatable temperature
+
+TIME_TO_EMPTY
+  seconds left for battery to be considered empty
+  (i.e. while battery powers a load)
+TIME_TO_FULL
+  seconds left for battery to be considered full
+  (i.e. while battery is charging)
+
+
+Battery <-> external power supply interaction
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Often power supplies are acting as supplies and supplicants at the same
+time. Batteries are good example. So, batteries usually care if they're
+externally powered or not.
+
+For that case, power supply class implements notification mechanism for
+batteries.
+
+External power supply (AC) lists supplicants (batteries) names in
+"supplied_to" struct member, and each power_supply_changed() call
+issued by external power supply will notify supplicants via
+external_power_changed callback.
+
+
+Devicetree battery characteristics
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Drivers should call power_supply_get_battery_info() to obtain battery
+characteristics from a devicetree battery node, defined in
+Documentation/devicetree/bindings/power/supply/battery.txt. This is
+implemented in drivers/power/supply/bq27xxx_battery.c.
+
+Properties in struct power_supply_battery_info and their counterparts in the
+battery node have names corresponding to elements in enum power_supply_property,
+for naming consistency between sysfs attributes and battery node properties.
+
+
+QA
+~~
+
+Q:
+   Where is POWER_SUPPLY_PROP_XYZ attribute?
+A:
+   If you cannot find attribute suitable for your driver needs, feel free
+   to add it and send patch along with your driver.
+
+   The attributes available currently are the ones currently provided by the
+   drivers written.
+
+   Good candidates to add in future: model/part#, cycle_time, manufacturer,
+   etc.
+
+
+Q:
+   I have some very specific attribute (e.g. battery color), should I add
+   this attribute to standard ones?
+A:
+   Most likely, no. Such attribute can be placed in the driver itself, if
+   it is useful. Of course, if the attribute in question applicable to
+   large set of batteries, provided by many drivers, and/or comes from
+   some general battery specification/standard, it may be a candidate to
+   be added to the core attribute set.
+
+
+Q:
+   Suppose, my battery monitoring chip/firmware does not provides capacity
+   in percents, but provides charge_{now,full,empty}. Should I calculate
+   percentage capacity manually, inside the driver, and register CAPACITY
+   attribute? The same question about time_to_empty/time_to_full.
+A:
+   Most likely, no. This class is designed to export properties which are
+   directly measurable by the specific hardware available.
+
+   Inferring not available properties using some heuristics or mathematical
+   model is not subject of work for a battery driver. Such functionality
+   should be factored out, and in fact, apm_power, the driver to serve
+   legacy APM API on top of power supply class, uses a simple heuristic of
+   approximating remaining battery capacity based on its charge, current,
+   voltage and so on. But full-fledged battery model is likely not subject
+   for kernel at all, as it would require floating point calculation to deal
+   with things like differential equations and Kalman filters. This is
+   better be handled by batteryd/libbattery, yet to be written.
diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt
deleted file mode 100644
index 300d37896e51..000000000000
--- a/Documentation/power/power_supply_class.txt
+++ /dev/null
@@ -1,231 +0,0 @@
-Linux power supply class
-========================
-
-Synopsis
-~~~~~~~~
-Power supply class used to represent battery, UPS, AC or DC power supply
-properties to user-space.
-
-It defines core set of attributes, which should be applicable to (almost)
-every power supply out there. Attributes are available via sysfs and uevent
-interfaces.
-
-Each attribute has well defined meaning, up to unit of measure used. While
-the attributes provided are believed to be universally applicable to any
-power supply, specific monitoring hardware may not be able to provide them
-all, so any of them may be skipped.
-
-Power supply class is extensible, and allows to define drivers own attributes.
-The core attribute set is subject to the standard Linux evolution (i.e.
-if it will be found that some attribute is applicable to many power supply
-types or their drivers, it can be added to the core set).
-
-It also integrates with LED framework, for the purpose of providing
-typically expected feedback of battery charging/fully charged status and
-AC/USB power supply online status. (Note that specific details of the
-indication (including whether to use it at all) are fully controllable by
-user and/or specific machine defaults, per design principles of LED
-framework).
-
-
-Attributes/properties
-~~~~~~~~~~~~~~~~~~~~~
-Power supply class has predefined set of attributes, this eliminates code
-duplication across drivers. Power supply class insist on reusing its
-predefined attributes *and* their units.
-
-So, userspace gets predictable set of attributes and their units for any
-kind of power supply, and can process/present them to a user in consistent
-manner. Results for different power supplies and machines are also directly
-comparable.
-
-See drivers/power/supply/ds2760_battery.c and drivers/power/supply/pda_power.c
-for the example how to declare and handle attributes.
-
-
-Units
-~~~~~
-Quoting include/linux/power_supply.h:
-
-  All voltages, currents, charges, energies, time and temperatures in µV,
-  µA, µAh, µWh, seconds and tenths of degree Celsius unless otherwise
-  stated. It's driver's job to convert its raw values to units in which
-  this class operates.
-
-
-Attributes/properties detailed
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-~ ~ ~ ~ ~ ~ ~  Charge/Energy/Capacity - how to not confuse  ~ ~ ~ ~ ~ ~ ~
-~                                                                       ~
-~ Because both "charge" (µAh) and "energy" (µWh) represents "capacity"  ~
-~ of battery, this class distinguish these terms. Don't mix them!       ~
-~                                                                       ~
-~ CHARGE_* attributes represents capacity in µAh only.                  ~
-~ ENERGY_* attributes represents capacity in µWh only.                  ~
-~ CAPACITY attribute represents capacity in *percents*, from 0 to 100.  ~
-~                                                                       ~
-~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
-
-Postfixes:
-_AVG - *hardware* averaged value, use it if your hardware is really able to
-report averaged values.
-_NOW - momentary/instantaneous values.
-
-STATUS - this attribute represents operating status (charging, full,
-discharging (i.e. powering a load), etc.). This corresponds to
-BATTERY_STATUS_* values, as defined in battery.h.
-
-CHARGE_TYPE - batteries can typically charge at different rates.
-This defines trickle and fast charges.  For batteries that
-are already charged or discharging, 'n/a' can be displayed (or
-'unknown', if the status is not known).
-
-AUTHENTIC - indicates the power supply (battery or charger) connected
-to the platform is authentic(1) or non authentic(0).
-
-HEALTH - represents health of the battery, values corresponds to
-POWER_SUPPLY_HEALTH_*, defined in battery.h.
-
-VOLTAGE_OCV - open circuit voltage of the battery.
-
-VOLTAGE_MAX_DESIGN, VOLTAGE_MIN_DESIGN - design values for maximal and
-minimal power supply voltages. Maximal/minimal means values of voltages
-when battery considered "full"/"empty" at normal conditions. Yes, there is
-no direct relation between voltage and battery capacity, but some dumb
-batteries use voltage for very approximated calculation of capacity.
-Battery driver also can use this attribute just to inform userspace
-about maximal and minimal voltage thresholds of a given battery.
-
-VOLTAGE_MAX, VOLTAGE_MIN - same as _DESIGN voltage values except that
-these ones should be used if hardware could only guess (measure and
-retain) the thresholds of a given power supply.
-
-VOLTAGE_BOOT - Reports the voltage measured during boot
-
-CURRENT_BOOT - Reports the current measured during boot
-
-CHARGE_FULL_DESIGN, CHARGE_EMPTY_DESIGN - design charge values, when
-battery considered full/empty.
-
-ENERGY_FULL_DESIGN, ENERGY_EMPTY_DESIGN - same as above but for energy.
-
-CHARGE_FULL, CHARGE_EMPTY - These attributes means "last remembered value
-of charge when battery became full/empty". It also could mean "value of
-charge when battery considered full/empty at given conditions (temperature,
-age)". I.e. these attributes represents real thresholds, not design values.
-
-ENERGY_FULL, ENERGY_EMPTY - same as above but for energy.
-
-CHARGE_COUNTER - the current charge counter (in µAh).  This could easily
-be negative; there is no empty or full value.  It is only useful for
-relative, time-based measurements.
-
-PRECHARGE_CURRENT - the maximum charge current during precharge phase
-of charge cycle (typically 20% of battery capacity).
-CHARGE_TERM_CURRENT - Charge termination current. The charge cycle
-terminates when battery voltage is above recharge threshold, and charge
-current is below this setting (typically 10% of battery capacity).
-
-CONSTANT_CHARGE_CURRENT - constant charge current programmed by charger.
-CONSTANT_CHARGE_CURRENT_MAX - maximum charge current supported by the
-power supply object.
-
-CONSTANT_CHARGE_VOLTAGE - constant charge voltage programmed by charger.
-CONSTANT_CHARGE_VOLTAGE_MAX - maximum charge voltage supported by the
-power supply object.
-
-INPUT_CURRENT_LIMIT - input current limit programmed by charger. Indicates
-the current drawn from a charging source.
-
-CHARGE_CONTROL_LIMIT - current charge control limit setting
-CHARGE_CONTROL_LIMIT_MAX - maximum charge control limit setting
-
-CALIBRATE - battery or coulomb counter calibration status
-
-CAPACITY - capacity in percents.
-CAPACITY_ALERT_MIN - minimum capacity alert value in percents.
-CAPACITY_ALERT_MAX - maximum capacity alert value in percents.
-CAPACITY_LEVEL - capacity level. This corresponds to
-POWER_SUPPLY_CAPACITY_LEVEL_*.
-
-TEMP - temperature of the power supply.
-TEMP_ALERT_MIN - minimum battery temperature alert.
-TEMP_ALERT_MAX - maximum battery temperature alert.
-TEMP_AMBIENT - ambient temperature.
-TEMP_AMBIENT_ALERT_MIN - minimum ambient temperature alert.
-TEMP_AMBIENT_ALERT_MAX - maximum ambient temperature alert.
-TEMP_MIN - minimum operatable temperature
-TEMP_MAX - maximum operatable temperature
-
-TIME_TO_EMPTY - seconds left for battery to be considered empty (i.e.
-while battery powers a load)
-TIME_TO_FULL - seconds left for battery to be considered full (i.e.
-while battery is charging)
-
-
-Battery <-> external power supply interaction
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Often power supplies are acting as supplies and supplicants at the same
-time. Batteries are good example. So, batteries usually care if they're
-externally powered or not.
-
-For that case, power supply class implements notification mechanism for
-batteries.
-
-External power supply (AC) lists supplicants (batteries) names in
-"supplied_to" struct member, and each power_supply_changed() call
-issued by external power supply will notify supplicants via
-external_power_changed callback.
-
-
-Devicetree battery characteristics
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Drivers should call power_supply_get_battery_info() to obtain battery
-characteristics from a devicetree battery node, defined in
-Documentation/devicetree/bindings/power/supply/battery.txt. This is
-implemented in drivers/power/supply/bq27xxx_battery.c.
-
-Properties in struct power_supply_battery_info and their counterparts in the
-battery node have names corresponding to elements in enum power_supply_property,
-for naming consistency between sysfs attributes and battery node properties.
-
-
-QA
-~~
-Q: Where is POWER_SUPPLY_PROP_XYZ attribute?
-A: If you cannot find attribute suitable for your driver needs, feel free
-   to add it and send patch along with your driver.
-
-   The attributes available currently are the ones currently provided by the
-   drivers written.
-
-   Good candidates to add in future: model/part#, cycle_time, manufacturer,
-   etc.
-
-
-Q: I have some very specific attribute (e.g. battery color), should I add
-   this attribute to standard ones?
-A: Most likely, no. Such attribute can be placed in the driver itself, if
-   it is useful. Of course, if the attribute in question applicable to
-   large set of batteries, provided by many drivers, and/or comes from
-   some general battery specification/standard, it may be a candidate to
-   be added to the core attribute set.
-
-
-Q: Suppose, my battery monitoring chip/firmware does not provides capacity
-   in percents, but provides charge_{now,full,empty}. Should I calculate
-   percentage capacity manually, inside the driver, and register CAPACITY
-   attribute? The same question about time_to_empty/time_to_full.
-A: Most likely, no. This class is designed to export properties which are
-   directly measurable by the specific hardware available.
-
-   Inferring not available properties using some heuristics or mathematical
-   model is not subject of work for a battery driver. Such functionality
-   should be factored out, and in fact, apm_power, the driver to serve
-   legacy APM API on top of power supply class, uses a simple heuristic of
-   approximating remaining battery capacity based on its charge, current,
-   voltage and so on. But full-fledged battery model is likely not subject
-   for kernel at all, as it would require floating point calculation to deal
-   with things like differential equations and Kalman filters. This is
-   better be handled by batteryd/libbattery, yet to be written.
diff --git a/Documentation/power/powercap/powercap.rst b/Documentation/power/powercap/powercap.rst
new file mode 100644
index 000000000000..7ae3b44c7624
--- /dev/null
+++ b/Documentation/power/powercap/powercap.rst
@@ -0,0 +1,257 @@
+=======================
+Power Capping Framework
+=======================
+
+The power capping framework provides a consistent interface between the kernel
+and the user space that allows power capping drivers to expose the settings to
+user space in a uniform way.
+
+Terminology
+===========
+
+The framework exposes power capping devices to user space via sysfs in the
+form of a tree of objects. The objects at the root level of the tree represent
+'control types', which correspond to different methods of power capping.  For
+example, the intel-rapl control type represents the Intel "Running Average
+Power Limit" (RAPL) technology, whereas the 'idle-injection' control type
+corresponds to the use of idle injection for controlling power.
+
+Power zones represent different parts of the system, which can be controlled and
+monitored using the power capping method determined by the control type the
+given zone belongs to. They each contain attributes for monitoring power, as
+well as controls represented in the form of power constraints.  If the parts of
+the system represented by different power zones are hierarchical (that is, one
+bigger part consists of multiple smaller parts that each have their own power
+controls), those power zones may also be organized in a hierarchy with one
+parent power zone containing multiple subzones and so on to reflect the power
+control topology of the system.  In that case, it is possible to apply power
+capping to a set of devices together using the parent power zone and if more
+fine grained control is required, it can be applied through the subzones.
+
+
+Example sysfs interface tree::
+
+  /sys/devices/virtual/powercap
+  └──intel-rapl
+      ├──intel-rapl:0
+      │   ├──constraint_0_name
+      │   ├──constraint_0_power_limit_uw
+      │   ├──constraint_0_time_window_us
+      │   ├──constraint_1_name
+      │   ├──constraint_1_power_limit_uw
+      │   ├──constraint_1_time_window_us
+      │   ├──device -> ../../intel-rapl
+      │   ├──energy_uj
+      │   ├──intel-rapl:0:0
+      │   │   ├──constraint_0_name
+      │   │   ├──constraint_0_power_limit_uw
+      │   │   ├──constraint_0_time_window_us
+      │   │   ├──constraint_1_name
+      │   │   ├──constraint_1_power_limit_uw
+      │   │   ├──constraint_1_time_window_us
+      │   │   ├──device -> ../../intel-rapl:0
+      │   │   ├──energy_uj
+      │   │   ├──max_energy_range_uj
+      │   │   ├──name
+      │   │   ├──enabled
+      │   │   ├──power
+      │   │   │   ├──async
+      │   │   │   []
+      │   │   ├──subsystem -> ../../../../../../class/power_cap
+      │   │   └──uevent
+      │   ├──intel-rapl:0:1
+      │   │   ├──constraint_0_name
+      │   │   ├──constraint_0_power_limit_uw
+      │   │   ├──constraint_0_time_window_us
+      │   │   ├──constraint_1_name
+      │   │   ├──constraint_1_power_limit_uw
+      │   │   ├──constraint_1_time_window_us
+      │   │   ├──device -> ../../intel-rapl:0
+      │   │   ├──energy_uj
+      │   │   ├──max_energy_range_uj
+      │   │   ├──name
+      │   │   ├──enabled
+      │   │   ├──power
+      │   │   │   ├──async
+      │   │   │   []
+      │   │   ├──subsystem -> ../../../../../../class/power_cap
+      │   │   └──uevent
+      │   ├──max_energy_range_uj
+      │   ├──max_power_range_uw
+      │   ├──name
+      │   ├──enabled
+      │   ├──power
+      │   │   ├──async
+      │   │   []
+      │   ├──subsystem -> ../../../../../class/power_cap
+      │   ├──enabled
+      │   ├──uevent
+      ├──intel-rapl:1
+      │   ├──constraint_0_name
+      │   ├──constraint_0_power_limit_uw
+      │   ├──constraint_0_time_window_us
+      │   ├──constraint_1_name
+      │   ├──constraint_1_power_limit_uw
+      │   ├──constraint_1_time_window_us
+      │   ├──device -> ../../intel-rapl
+      │   ├──energy_uj
+      │   ├──intel-rapl:1:0
+      │   │   ├──constraint_0_name
+      │   │   ├──constraint_0_power_limit_uw
+      │   │   ├──constraint_0_time_window_us
+      │   │   ├──constraint_1_name
+      │   │   ├──constraint_1_power_limit_uw
+      │   │   ├──constraint_1_time_window_us
+      │   │   ├──device -> ../../intel-rapl:1
+      │   │   ├──energy_uj
+      │   │   ├──max_energy_range_uj
+      │   │   ├──name
+      │   │   ├──enabled
+      │   │   ├──power
+      │   │   │   ├──async
+      │   │   │   []
+      │   │   ├──subsystem -> ../../../../../../class/power_cap
+      │   │   └──uevent
+      │   ├──intel-rapl:1:1
+      │   │   ├──constraint_0_name
+      │   │   ├──constraint_0_power_limit_uw
+      │   │   ├──constraint_0_time_window_us
+      │   │   ├──constraint_1_name
+      │   │   ├──constraint_1_power_limit_uw
+      │   │   ├──constraint_1_time_window_us
+      │   │   ├──device -> ../../intel-rapl:1
+      │   │   ├──energy_uj
+      │   │   ├──max_energy_range_uj
+      │   │   ├──name
+      │   │   ├──enabled
+      │   │   ├──power
+      │   │   │   ├──async
+      │   │   │   []
+      │   │   ├──subsystem -> ../../../../../../class/power_cap
+      │   │   └──uevent
+      │   ├──max_energy_range_uj
+      │   ├──max_power_range_uw
+      │   ├──name
+      │   ├──enabled
+      │   ├──power
+      │   │   ├──async
+      │   │   []
+      │   ├──subsystem -> ../../../../../class/power_cap
+      │   ├──uevent
+      ├──power
+      │   ├──async
+      │   []
+      ├──subsystem -> ../../../../class/power_cap
+      ├──enabled
+      └──uevent
+
+The above example illustrates a case in which the Intel RAPL technology,
+available in Intel® IA-64 and IA-32 Processor Architectures, is used. There is one
+control type called intel-rapl which contains two power zones, intel-rapl:0 and
+intel-rapl:1, representing CPU packages.  Each of these power zones contains
+two subzones, intel-rapl:j:0 and intel-rapl:j:1 (j = 0, 1), representing the
+"core" and the "uncore" parts of the given CPU package, respectively.  All of
+the zones and subzones contain energy monitoring attributes (energy_uj,
+max_energy_range_uj) and constraint attributes (constraint_*) allowing controls
+to be applied (the constraints in the 'package' power zones apply to the whole
+CPU packages and the subzone constraints only apply to the respective parts of
+the given package individually). Since Intel RAPL doesn't provide instantaneous
+power value, there is no power_uw attribute.
+
+In addition to that, each power zone contains a name attribute, allowing the
+part of the system represented by that zone to be identified.
+For example::
+
+	cat /sys/class/power_cap/intel-rapl/intel-rapl:0/name
+
+package-0
+---------
+
+The Intel RAPL technology allows two constraints, short term and long term,
+with two different time windows to be applied to each power zone.  Thus for
+each zone there are 2 attributes representing the constraint names, 2 power
+limits and 2 attributes representing the sizes of the time windows. Such that,
+constraint_j_* attributes correspond to the jth constraint (j = 0,1).
+
+For example::
+
+	constraint_0_name
+	constraint_0_power_limit_uw
+	constraint_0_time_window_us
+	constraint_1_name
+	constraint_1_power_limit_uw
+	constraint_1_time_window_us
+
+Power Zone Attributes
+=====================
+
+Monitoring attributes
+---------------------
+
+energy_uj (rw)
+	Current energy counter in micro joules. Write "0" to reset.
+	If the counter can not be reset, then this attribute is read only.
+
+max_energy_range_uj (ro)
+	Range of the above energy counter in micro-joules.
+
+power_uw (ro)
+	Current power in micro watts.
+
+max_power_range_uw (ro)
+	Range of the above power value in micro-watts.
+
+name (ro)
+	Name of this power zone.
+
+It is possible that some domains have both power ranges and energy counter ranges;
+however, only one is mandatory.
+
+Constraints
+-----------
+
+constraint_X_power_limit_uw (rw)
+	Power limit in micro watts, which should be applicable for the
+	time window specified by "constraint_X_time_window_us".
+
+constraint_X_time_window_us (rw)
+	Time window in micro seconds.
+
+constraint_X_name (ro)
+	An optional name of the constraint
+
+constraint_X_max_power_uw(ro)
+	Maximum allowed power in micro watts.
+
+constraint_X_min_power_uw(ro)
+	Minimum allowed power in micro watts.
+
+constraint_X_max_time_window_us(ro)
+	Maximum allowed time window in micro seconds.
+
+constraint_X_min_time_window_us(ro)
+	Minimum allowed time window in micro seconds.
+
+Except power_limit_uw and time_window_us other fields are optional.
+
+Common zone and control type attributes
+---------------------------------------
+
+enabled (rw): Enable/Disable controls at zone level or for all zones using
+a control type.
+
+Power Cap Client Driver Interface
+=================================
+
+The API summary:
+
+Call powercap_register_control_type() to register control type object.
+Call powercap_register_zone() to register a power zone (under a given
+control type), either as a top-level power zone or as a subzone of another
+power zone registered earlier.
+The number of constraints in a power zone and the corresponding callbacks have
+to be defined prior to calling powercap_register_zone() to register that zone.
+
+To Free a power zone call powercap_unregister_zone().
+To free a control type object call powercap_unregister_control_type().
+Detailed API can be generated using kernel-doc on include/linux/powercap.h.
diff --git a/Documentation/power/powercap/powercap.txt b/Documentation/power/powercap/powercap.txt
deleted file mode 100644
index 1e6ef164e07a..000000000000
--- a/Documentation/power/powercap/powercap.txt
+++ /dev/null
@@ -1,236 +0,0 @@
-Power Capping Framework
-==================================
-
-The power capping framework provides a consistent interface between the kernel
-and the user space that allows power capping drivers to expose the settings to
-user space in a uniform way.
-
-Terminology
-=========================
-The framework exposes power capping devices to user space via sysfs in the
-form of a tree of objects. The objects at the root level of the tree represent
-'control types', which correspond to different methods of power capping.  For
-example, the intel-rapl control type represents the Intel "Running Average
-Power Limit" (RAPL) technology, whereas the 'idle-injection' control type
-corresponds to the use of idle injection for controlling power.
-
-Power zones represent different parts of the system, which can be controlled and
-monitored using the power capping method determined by the control type the
-given zone belongs to. They each contain attributes for monitoring power, as
-well as controls represented in the form of power constraints.  If the parts of
-the system represented by different power zones are hierarchical (that is, one
-bigger part consists of multiple smaller parts that each have their own power
-controls), those power zones may also be organized in a hierarchy with one
-parent power zone containing multiple subzones and so on to reflect the power
-control topology of the system.  In that case, it is possible to apply power
-capping to a set of devices together using the parent power zone and if more
-fine grained control is required, it can be applied through the subzones.
-
-
-Example sysfs interface tree:
-
-/sys/devices/virtual/powercap
-??? intel-rapl
-    ??? intel-rapl:0
-    ?   ??? constraint_0_name
-    ?   ??? constraint_0_power_limit_uw
-    ?   ??? constraint_0_time_window_us
-    ?   ??? constraint_1_name
-    ?   ??? constraint_1_power_limit_uw
-    ?   ??? constraint_1_time_window_us
-    ?   ??? device -> ../../intel-rapl
-    ?   ??? energy_uj
-    ?   ??? intel-rapl:0:0
-    ?   ?   ??? constraint_0_name
-    ?   ?   ??? constraint_0_power_limit_uw
-    ?   ?   ??? constraint_0_time_window_us
-    ?   ?   ??? constraint_1_name
-    ?   ?   ??? constraint_1_power_limit_uw
-    ?   ?   ??? constraint_1_time_window_us
-    ?   ?   ??? device -> ../../intel-rapl:0
-    ?   ?   ??? energy_uj
-    ?   ?   ??? max_energy_range_uj
-    ?   ?   ??? name
-    ?   ?   ??? enabled
-    ?   ?   ??? power
-    ?   ?   ?   ??? async
-    ?   ?   ?   []
-    ?   ?   ??? subsystem -> ../../../../../../class/power_cap
-    ?   ?   ??? uevent
-    ?   ??? intel-rapl:0:1
-    ?   ?   ??? constraint_0_name
-    ?   ?   ??? constraint_0_power_limit_uw
-    ?   ?   ??? constraint_0_time_window_us
-    ?   ?   ??? constraint_1_name
-    ?   ?   ??? constraint_1_power_limit_uw
-    ?   ?   ??? constraint_1_time_window_us
-    ?   ?   ??? device -> ../../intel-rapl:0
-    ?   ?   ??? energy_uj
-    ?   ?   ??? max_energy_range_uj
-    ?   ?   ??? name
-    ?   ?   ??? enabled
-    ?   ?   ??? power
-    ?   ?   ?   ??? async
-    ?   ?   ?   []
-    ?   ?   ??? subsystem -> ../../../../../../class/power_cap
-    ?   ?   ??? uevent
-    ?   ??? max_energy_range_uj
-    ?   ??? max_power_range_uw
-    ?   ??? name
-    ?   ??? enabled
-    ?   ??? power
-    ?   ?   ??? async
-    ?   ?   []
-    ?   ??? subsystem -> ../../../../../class/power_cap
-    ?   ??? enabled
-    ?   ??? uevent
-    ??? intel-rapl:1
-    ?   ??? constraint_0_name
-    ?   ??? constraint_0_power_limit_uw
-    ?   ??? constraint_0_time_window_us
-    ?   ??? constraint_1_name
-    ?   ??? constraint_1_power_limit_uw
-    ?   ??? constraint_1_time_window_us
-    ?   ??? device -> ../../intel-rapl
-    ?   ??? energy_uj
-    ?   ??? intel-rapl:1:0
-    ?   ?   ??? constraint_0_name
-    ?   ?   ??? constraint_0_power_limit_uw
-    ?   ?   ??? constraint_0_time_window_us
-    ?   ?   ??? constraint_1_name
-    ?   ?   ??? constraint_1_power_limit_uw
-    ?   ?   ??? constraint_1_time_window_us
-    ?   ?   ??? device -> ../../intel-rapl:1
-    ?   ?   ??? energy_uj
-    ?   ?   ??? max_energy_range_uj
-    ?   ?   ??? name
-    ?   ?   ??? enabled
-    ?   ?   ??? power
-    ?   ?   ?   ??? async
-    ?   ?   ?   []
-    ?   ?   ??? subsystem -> ../../../../../../class/power_cap
-    ?   ?   ??? uevent
-    ?   ??? intel-rapl:1:1
-    ?   ?   ??? constraint_0_name
-    ?   ?   ??? constraint_0_power_limit_uw
-    ?   ?   ??? constraint_0_time_window_us
-    ?   ?   ??? constraint_1_name
-    ?   ?   ??? constraint_1_power_limit_uw
-    ?   ?   ??? constraint_1_time_window_us
-    ?   ?   ??? device -> ../../intel-rapl:1
-    ?   ?   ??? energy_uj
-    ?   ?   ??? max_energy_range_uj
-    ?   ?   ??? name
-    ?   ?   ??? enabled
-    ?   ?   ??? power
-    ?   ?   ?   ??? async
-    ?   ?   ?   []
-    ?   ?   ??? subsystem -> ../../../../../../class/power_cap
-    ?   ?   ??? uevent
-    ?   ??? max_energy_range_uj
-    ?   ??? max_power_range_uw
-    ?   ??? name
-    ?   ??? enabled
-    ?   ??? power
-    ?   ?   ??? async
-    ?   ?   []
-    ?   ??? subsystem -> ../../../../../class/power_cap
-    ?   ??? uevent
-    ??? power
-    ?   ??? async
-    ?   []
-    ??? subsystem -> ../../../../class/power_cap
-    ??? enabled
-    ??? uevent
-
-The above example illustrates a case in which the Intel RAPL technology,
-available in Intel® IA-64 and IA-32 Processor Architectures, is used. There is one
-control type called intel-rapl which contains two power zones, intel-rapl:0 and
-intel-rapl:1, representing CPU packages.  Each of these power zones contains
-two subzones, intel-rapl:j:0 and intel-rapl:j:1 (j = 0, 1), representing the
-"core" and the "uncore" parts of the given CPU package, respectively.  All of
-the zones and subzones contain energy monitoring attributes (energy_uj,
-max_energy_range_uj) and constraint attributes (constraint_*) allowing controls
-to be applied (the constraints in the 'package' power zones apply to the whole
-CPU packages and the subzone constraints only apply to the respective parts of
-the given package individually). Since Intel RAPL doesn't provide instantaneous
-power value, there is no power_uw attribute.
-
-In addition to that, each power zone contains a name attribute, allowing the
-part of the system represented by that zone to be identified.
-For example:
-
-cat /sys/class/power_cap/intel-rapl/intel-rapl:0/name
-package-0
-
-The Intel RAPL technology allows two constraints, short term and long term,
-with two different time windows to be applied to each power zone.  Thus for
-each zone there are 2 attributes representing the constraint names, 2 power
-limits and 2 attributes representing the sizes of the time windows. Such that,
-constraint_j_* attributes correspond to the jth constraint (j = 0,1).
-
-For example:
-	constraint_0_name
-	constraint_0_power_limit_uw
-	constraint_0_time_window_us
-	constraint_1_name
-	constraint_1_power_limit_uw
-	constraint_1_time_window_us
-
-Power Zone Attributes
-=================================
-Monitoring attributes
-----------------------
-
-energy_uj (rw): Current energy counter in micro joules. Write "0" to reset.
-If the counter can not be reset, then this attribute is read only.
-
-max_energy_range_uj (ro): Range of the above energy counter in micro-joules.
-
-power_uw (ro): Current power in micro watts.
-
-max_power_range_uw (ro): Range of the above power value in micro-watts.
-
-name (ro): Name of this power zone.
-
-It is possible that some domains have both power ranges and energy counter ranges;
-however, only one is mandatory.
-
-Constraints
-----------------
-constraint_X_power_limit_uw (rw): Power limit in micro watts, which should be
-applicable for the time window specified by "constraint_X_time_window_us".
-
-constraint_X_time_window_us (rw): Time window in micro seconds.
-
-constraint_X_name (ro): An optional name of the constraint
-
-constraint_X_max_power_uw(ro): Maximum allowed power in micro watts.
-
-constraint_X_min_power_uw(ro): Minimum allowed power in micro watts.
-
-constraint_X_max_time_window_us(ro): Maximum allowed time window in micro seconds.
-
-constraint_X_min_time_window_us(ro): Minimum allowed time window in micro seconds.
-
-Except power_limit_uw and time_window_us other fields are optional.
-
-Common zone and control type attributes
-----------------------------------------
-enabled (rw): Enable/Disable controls at zone level or for all zones using
-a control type.
-
-Power Cap Client Driver Interface
-==================================
-The API summary:
-
-Call powercap_register_control_type() to register control type object.
-Call powercap_register_zone() to register a power zone (under a given
-control type), either as a top-level power zone or as a subzone of another
-power zone registered earlier.
-The number of constraints in a power zone and the corresponding callbacks have
-to be defined prior to calling powercap_register_zone() to register that zone.
-
-To Free a power zone call powercap_unregister_zone().
-To free a control type object call powercap_unregister_control_type().
-Detailed API can be generated using kernel-doc on include/linux/powercap.h.
diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.rst
similarity index 61%
rename from Documentation/power/regulator/consumer.txt
rename to Documentation/power/regulator/consumer.rst
index e51564c1a140..0cd8cc1275a7 100644
--- a/Documentation/power/regulator/consumer.txt
+++ b/Documentation/power/regulator/consumer.rst
@@ -1,3 +1,4 @@
+===================================
 Regulator Consumer Driver Interface
 ===================================
 
@@ -8,73 +9,77 @@ Please see overview.txt for a description of the terms used in this text.
 1. Consumer Regulator Access (static & dynamic drivers)
 =======================================================
 
-A consumer driver can get access to its supply regulator by calling :-
+A consumer driver can get access to its supply regulator by calling ::
 
-regulator = regulator_get(dev, "Vcc");
+	regulator = regulator_get(dev, "Vcc");
 
 The consumer passes in its struct device pointer and power supply ID. The core
 then finds the correct regulator by consulting a machine specific lookup table.
 If the lookup is successful then this call will return a pointer to the struct
 regulator that supplies this consumer.
 
-To release the regulator the consumer driver should call :-
+To release the regulator the consumer driver should call ::
 
-regulator_put(regulator);
+	regulator_put(regulator);
 
 Consumers can be supplied by more than one regulator e.g. codec consumer with
-analog and digital supplies :-
+analog and digital supplies ::
 
-digital = regulator_get(dev, "Vcc");  /* digital core */
-analog = regulator_get(dev, "Avdd");  /* analog */
+	digital = regulator_get(dev, "Vcc");  /* digital core */
+	analog = regulator_get(dev, "Avdd");  /* analog */
 
 The regulator access functions regulator_get() and regulator_put() will
 usually be called in your device drivers probe() and remove() respectively.
 
 
 2. Regulator Output Enable & Disable (static & dynamic drivers)
-====================================================================
+===============================================================
 
-A consumer can enable its power supply by calling:-
 
-int regulator_enable(regulator);
+A consumer can enable its power supply by calling::
 
-NOTE: The supply may already be enabled before regulator_enabled() is called.
-This may happen if the consumer shares the regulator or the regulator has been
-previously enabled by bootloader or kernel board initialization code.
+	int regulator_enable(regulator);
 
-A consumer can determine if a regulator is enabled by calling :-
+NOTE:
+  The supply may already be enabled before regulator_enabled() is called.
+  This may happen if the consumer shares the regulator or the regulator has been
+  previously enabled by bootloader or kernel board initialization code.
 
-int regulator_is_enabled(regulator);
+A consumer can determine if a regulator is enabled by calling::
+
+	int regulator_is_enabled(regulator);
 
 This will return > zero when the regulator is enabled.
 
 
-A consumer can disable its supply when no longer needed by calling :-
+A consumer can disable its supply when no longer needed by calling::
 
-int regulator_disable(regulator);
+	int regulator_disable(regulator);
 
-NOTE: This may not disable the supply if it's shared with other consumers. The
-regulator will only be disabled when the enabled reference count is zero.
+NOTE:
+  This may not disable the supply if it's shared with other consumers. The
+  regulator will only be disabled when the enabled reference count is zero.
 
-Finally, a regulator can be forcefully disabled in the case of an emergency :-
+Finally, a regulator can be forcefully disabled in the case of an emergency::
 
-int regulator_force_disable(regulator);
+	int regulator_force_disable(regulator);
 
-NOTE: this will immediately and forcefully shutdown the regulator output. All
-consumers will be powered off.
+NOTE:
+  this will immediately and forcefully shutdown the regulator output. All
+  consumers will be powered off.
 
 
 3. Regulator Voltage Control & Status (dynamic drivers)
-======================================================
+=======================================================
 
 Some consumer drivers need to be able to dynamically change their supply
 voltage to match system operating points. e.g. CPUfreq drivers can scale
 voltage along with frequency to save power, SD drivers may need to select the
 correct card voltage, etc.
 
-Consumers can control their supply voltage by calling :-
+Consumers can control their supply voltage by calling::
 
-int regulator_set_voltage(regulator, min_uV, max_uV);
+	int regulator_set_voltage(regulator, min_uV, max_uV);
 
 Where min_uV and max_uV are the minimum and maximum acceptable voltages in
 microvolts.
@@ -84,47 +89,50 @@ when enabled, then the voltage changes instantly, otherwise the voltage
 configuration changes and the voltage is physically set when the regulator is
 next enabled.
 
-The regulators configured voltage output can be found by calling :-
+The regulators configured voltage output can be found by calling::
 
-int regulator_get_voltage(regulator);
+	int regulator_get_voltage(regulator);
 
-NOTE: get_voltage() will return the configured output voltage whether the
-regulator is enabled or disabled and should NOT be used to determine regulator
-output state. However this can be used in conjunction with is_enabled() to
-determine the regulator physical output voltage.
+NOTE:
+  get_voltage() will return the configured output voltage whether the
+  regulator is enabled or disabled and should NOT be used to determine regulator
+  output state. However this can be used in conjunction with is_enabled() to
+  determine the regulator physical output voltage.
 
 
 4. Regulator Current Limit Control & Status (dynamic drivers)
-===========================================================
+=============================================================
 
 Some consumer drivers need to be able to dynamically change their supply
 current limit to match system operating points. e.g. LCD backlight driver can
 change the current limit to vary the backlight brightness, USB drivers may want
 to set the limit to 500mA when supplying power.
 
-Consumers can control their supply current limit by calling :-
+Consumers can control their supply current limit by calling::
 
-int regulator_set_current_limit(regulator, min_uA, max_uA);
+	int regulator_set_current_limit(regulator, min_uA, max_uA);
 
 Where min_uA and max_uA are the minimum and maximum acceptable current limit in
 microamps.
 
-NOTE: this can be called when the regulator is enabled or disabled. If called
-when enabled, then the current limit changes instantly, otherwise the current
-limit configuration changes and the current limit is physically set when the
-regulator is next enabled.
+NOTE:
+  this can be called when the regulator is enabled or disabled. If called
+  when enabled, then the current limit changes instantly, otherwise the current
+  limit configuration changes and the current limit is physically set when the
+  regulator is next enabled.
 
-A regulators current limit can be found by calling :-
+A regulators current limit can be found by calling::
 
-int regulator_get_current_limit(regulator);
+	int regulator_get_current_limit(regulator);
 
-NOTE: get_current_limit() will return the current limit whether the regulator
-is enabled or disabled and should not be used to determine regulator current
-load.
+NOTE:
+  get_current_limit() will return the current limit whether the regulator
+  is enabled or disabled and should not be used to determine regulator current
+  load.
 
 
 5. Regulator Operating Mode Control & Status (dynamic drivers)
-=============================================================
+==============================================================
 
 Some consumers can further save system power by changing the operating mode of
 their supply regulator to be more efficient when the consumers operating state
@@ -135,9 +143,9 @@ Regulator operating mode can be changed indirectly or directly.
 Indirect operating mode control.
 --------------------------------
 Consumer drivers can request a change in their supply regulator operating mode
-by calling :-
+by calling::
 
-int regulator_set_load(struct regulator *regulator, int load_uA);
+	int regulator_set_load(struct regulator *regulator, int load_uA);
 
 This will cause the core to recalculate the total load on the regulator (based
 on all its consumers) and change operating mode (if necessary and permitted)
@@ -153,12 +161,13 @@ consumers.
 
 Direct operating mode control.
 ------------------------------
+
 Bespoke or tightly coupled drivers may want to directly control regulator
 operating mode depending on their operating point. This can be achieved by
-calling :-
+calling::
 
-int regulator_set_mode(struct regulator *regulator, unsigned int mode);
-unsigned int regulator_get_mode(struct regulator *regulator);
+	int regulator_set_mode(struct regulator *regulator, unsigned int mode);
+	unsigned int regulator_get_mode(struct regulator *regulator);
 
 Direct mode will only be used by consumers that *know* about the regulator and
 are not sharing the regulator with other consumers.
@@ -166,24 +175,26 @@ are not sharing the regulator with other consumers.
 
 6. Regulator Events
 ===================
+
 Regulators can notify consumers of external events. Events could be received by
 consumers under regulator stress or failure conditions.
 
-Consumers can register interest in regulator events by calling :-
+Consumers can register interest in regulator events by calling::
 
-int regulator_register_notifier(struct regulator *regulator,
-			      struct notifier_block *nb);
+	int regulator_register_notifier(struct regulator *regulator,
+					struct notifier_block *nb);
 
-Consumers can unregister interest by calling :-
+Consumers can unregister interest by calling::
 
-int regulator_unregister_notifier(struct regulator *regulator,
-				struct notifier_block *nb);
+	int regulator_unregister_notifier(struct regulator *regulator,
+					  struct notifier_block *nb);
 
 Regulators use the kernel notifier framework to send event to their interested
 consumers.
 
 7. Regulator Direct Register Access
 ===================================
+
 Some kinds of power management hardware or firmware are designed such that
 they need to do low-level hardware access to regulators, with no involvement
 from the kernel. Examples of such devices are:
@@ -199,20 +210,20 @@ to it. The regulator framework provides the following helpers for querying
 these details.
 
 Bus-specific details, like I2C addresses or transfer rates are handled by the
-regmap framework. To get the regulator's regmap (if supported), use :-
+regmap framework. To get the regulator's regmap (if supported), use::
 
-struct regmap *regulator_get_regmap(struct regulator *regulator);
+	struct regmap *regulator_get_regmap(struct regulator *regulator);
 
 To obtain the hardware register offset and bitmask for the regulator's voltage
-selector register, use :-
+selector register, use::
 
-int regulator_get_hardware_vsel_register(struct regulator *regulator,
-					 unsigned *vsel_reg,
-					 unsigned *vsel_mask);
+	int regulator_get_hardware_vsel_register(struct regulator *regulator,
+						 unsigned *vsel_reg,
+						 unsigned *vsel_mask);
 
 To convert a regulator framework voltage selector code (used by
 regulator_list_voltage) to a hardware-specific voltage selector that can be
-directly written to the voltage selector register, use :-
+directly written to the voltage selector register, use::
 
-int regulator_list_hardware_vsel(struct regulator *regulator,
-				 unsigned selector);
+	int regulator_list_hardware_vsel(struct regulator *regulator,
+					 unsigned selector);
diff --git a/Documentation/power/regulator/design.txt b/Documentation/power/regulator/design.rst
similarity index 86%
rename from Documentation/power/regulator/design.txt
rename to Documentation/power/regulator/design.rst
index fdd919b96830..3b09c6841dc4 100644
--- a/Documentation/power/regulator/design.txt
+++ b/Documentation/power/regulator/design.rst
@@ -1,3 +1,4 @@
+==========================
 Regulator API design notes
 ==========================
 
@@ -14,7 +15,9 @@ Safety
    have different power requirements, and not all components with power
    requirements are visible to software.
 
-  => The API should make no changes to the hardware state unless it has
+.. note::
+
+     The API should make no changes to the hardware state unless it has
      specific knowledge that these changes are safe to perform on this
      particular system.
 
@@ -28,6 +31,8 @@ Consumer use cases
  - Many of the power supplies in the system will be shared between many
    different consumers.
 
-  => The consumer API should be structured so that these use cases are
+.. note::
+
+     The consumer API should be structured so that these use cases are
      very easy to handle and so that consumers will work with shared
      supplies without any additional effort.
diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.rst
similarity index 75%
rename from Documentation/power/regulator/machine.txt
rename to Documentation/power/regulator/machine.rst
index eff4dcaaa252..22fffefaa3ad 100644
--- a/Documentation/power/regulator/machine.txt
+++ b/Documentation/power/regulator/machine.rst
@@ -1,10 +1,11 @@
+==================================
 Regulator Machine Driver Interface
-===================================
+==================================
 
 The regulator machine driver interface is intended for board/machine specific
 initialisation code to configure the regulator subsystem.
 
-Consider the following machine :-
+Consider the following machine::
 
   Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V]
                |
@@ -13,31 +14,31 @@ Consider the following machine :-
 The drivers for consumers A & B must be mapped to the correct regulator in
 order to control their power supplies. This mapping can be achieved in machine
 initialisation code by creating a struct regulator_consumer_supply for
-each regulator.
+each regulator::
 
-struct regulator_consumer_supply {
+  struct regulator_consumer_supply {
 	const char *dev_name;	/* consumer dev_name() */
 	const char *supply;	/* consumer supply - e.g. "vcc" */
-};
+  };
 
-e.g. for the machine above
+e.g. for the machine above::
 
-static struct regulator_consumer_supply regulator1_consumers[] = {
+  static struct regulator_consumer_supply regulator1_consumers[] = {
 	REGULATOR_SUPPLY("Vcc", "consumer B"),
-};
+  };
 
-static struct regulator_consumer_supply regulator2_consumers[] = {
+  static struct regulator_consumer_supply regulator2_consumers[] = {
 	REGULATOR_SUPPLY("Vcc", "consumer A"),
-};
+  };
 
 This maps Regulator-1 to the 'Vcc' supply for Consumer B and maps Regulator-2
 to the 'Vcc' supply for Consumer A.
 
 Constraints can now be registered by defining a struct regulator_init_data
 for each regulator power domain. This structure also maps the consumers
-to their supply regulators :-
+to their supply regulators::
 
-static struct regulator_init_data regulator1_data = {
+  static struct regulator_init_data regulator1_data = {
 	.constraints = {
 		.name = "Regulator-1",
 		.min_uV = 3300000,
@@ -46,7 +47,7 @@ static struct regulator_init_data regulator1_data = {
 	},
 	.num_consumer_supplies = ARRAY_SIZE(regulator1_consumers),
 	.consumer_supplies = regulator1_consumers,
-};
+  };
 
 The name field should be set to something that is usefully descriptive
 for the board for configuration of supplies for other regulators and
@@ -57,9 +58,9 @@ name is provided then the subsystem will choose one.
 Regulator-1 supplies power to Regulator-2. This relationship must be registered
 with the core so that Regulator-1 is also enabled when Consumer A enables its
 supply (Regulator-2). The supply regulator is set by the supply_regulator
-field below and co:-
+field below and co::
 
-static struct regulator_init_data regulator2_data = {
+  static struct regulator_init_data regulator2_data = {
 	.supply_regulator = "Regulator-1",
 	.constraints = {
 		.min_uV = 1800000,
@@ -69,11 +70,11 @@ static struct regulator_init_data regulator2_data = {
 	},
 	.num_consumer_supplies = ARRAY_SIZE(regulator2_consumers),
 	.consumer_supplies = regulator2_consumers,
-};
+  };
 
-Finally the regulator devices must be registered in the usual manner.
+Finally the regulator devices must be registered in the usual manner::
 
-static struct platform_device regulator_devices[] = {
+  static struct platform_device regulator_devices[] = {
 	{
 		.name = "regulator",
 		.id = DCDC_1,
@@ -88,9 +89,9 @@ static struct platform_device regulator_devices[] = {
 			.platform_data = &regulator2_data,
 		},
 	},
-};
-/* register regulator 1 device */
-platform_device_register(&regulator_devices[0]);
+  };
+  /* register regulator 1 device */
+  platform_device_register(&regulator_devices[0]);
 
-/* register regulator 2 device */
-platform_device_register(&regulator_devices[1]);
+  /* register regulator 2 device */
+  platform_device_register(&regulator_devices[1]);
diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.rst
similarity index 79%
rename from Documentation/power/regulator/overview.txt
rename to Documentation/power/regulator/overview.rst
index 721b4739ec32..ee494c70a7c4 100644
--- a/Documentation/power/regulator/overview.txt
+++ b/Documentation/power/regulator/overview.rst
@@ -1,3 +1,4 @@
+=============================================
 Linux voltage and current regulator framework
 =============================================
 
@@ -13,26 +14,30 @@ regulators (where voltage output is controllable) and current sinks (where
 current limit is controllable).
 
 (C) 2008  Wolfson Microelectronics PLC.
+
 Author: Liam Girdwood <lrg@slimlogic.co.uk>
 
 
 Nomenclature
 ============
 
-Some terms used in this document:-
+Some terms used in this document:
 
-  o Regulator    - Electronic device that supplies power to other devices.
+  - Regulator
+                 - Electronic device that supplies power to other devices.
                    Most regulators can enable and disable their output while
                    some can control their output voltage and or current.
 
                    Input Voltage -> Regulator -> Output Voltage
 
 
-  o PMIC         - Power Management IC. An IC that contains numerous regulators
-                   and often contains other subsystems.
+  - PMIC
+                 - Power Management IC. An IC that contains numerous
+                   regulators and often contains other subsystems.
 
 
-  o Consumer     - Electronic device that is supplied power by a regulator.
+  - Consumer
+                 - Electronic device that is supplied power by a regulator.
                    Consumers can be classified into two types:-
 
                    Static: consumer does not change its supply voltage or
@@ -44,46 +49,48 @@ Some terms used in this document:-
                    current limit to meet operation demands.
 
 
-  o Power Domain - Electronic circuit that is supplied its input power by the
+  - Power Domain
+                 - Electronic circuit that is supplied its input power by the
                    output power of a regulator, switch or by another power
                    domain.
 
-                   The supply regulator may be behind a switch(s). i.e.
+                   The supply regulator may be behind a switch(s). i.e.::
 
-                   Regulator -+-> Switch-1 -+-> Switch-2 --> [Consumer A]
-                              |             |
-                              |             +-> [Consumer B], [Consumer C]
-                              |
-                              +-> [Consumer D], [Consumer E]
+                     Regulator -+-> Switch-1 -+-> Switch-2 --> [Consumer A]
+                                |             |
+                                |             +-> [Consumer B], [Consumer C]
+                                |
+                                +-> [Consumer D], [Consumer E]
 
                    That is one regulator and three power domains:
 
-                   Domain 1: Switch-1, Consumers D & E.
-                   Domain 2: Switch-2, Consumers B & C.
-                   Domain 3: Consumer A.
+                   - Domain 1: Switch-1, Consumers D & E.
+                   - Domain 2: Switch-2, Consumers B & C.
+                   - Domain 3: Consumer A.
 
                    and this represents a "supplies" relationship:
 
                    Domain-1 --> Domain-2 --> Domain-3.
 
                    A power domain may have regulators that are supplied power
-                   by other regulators. i.e.
+                   by other regulators. i.e.::
 
-                   Regulator-1 -+-> Regulator-2 -+-> [Consumer A]
-                                |
-                                +-> [Consumer B]
+                     Regulator-1 -+-> Regulator-2 -+-> [Consumer A]
+                                  |
+                                  +-> [Consumer B]
 
                    This gives us two regulators and two power domains:
 
-                   Domain 1: Regulator-2, Consumer B.
-                   Domain 2: Consumer A.
+                   - Domain 1: Regulator-2, Consumer B.
+                   - Domain 2: Consumer A.
 
                    and a "supplies" relationship:
 
                    Domain-1 --> Domain-2
 
 
-  o Constraints  - Constraints are used to define power levels for performance
+  - Constraints
+                 - Constraints are used to define power levels for performance
                    and hardware protection. Constraints exist at three levels:
 
                    Regulator Level: This is defined by the regulator hardware
@@ -141,7 +148,7 @@ relevant to non SoC devices and is split into the following four interfaces:-
       limit. This also compiles out if not in use so drivers can be reused in
       systems with no regulator based power control.
 
-        See Documentation/power/regulator/consumer.txt
+        See Documentation/power/regulator/consumer.rst
 
    2. Regulator driver interface.
 
@@ -149,7 +156,7 @@ relevant to non SoC devices and is split into the following four interfaces:-
       operations to the core. It also has a notifier call chain for propagating
       regulator events to clients.
 
-        See Documentation/power/regulator/regulator.txt
+        See Documentation/power/regulator/regulator.rst
 
    3. Machine interface.
 
@@ -160,7 +167,7 @@ relevant to non SoC devices and is split into the following four interfaces:-
       allows the creation of a regulator tree whereby some regulators are
       supplied by others (similar to a clock tree).
 
-        See Documentation/power/regulator/machine.txt
+        See Documentation/power/regulator/machine.rst
 
    4. Userspace ABI.
 
diff --git a/Documentation/power/regulator/regulator.rst b/Documentation/power/regulator/regulator.rst
new file mode 100644
index 000000000000..794b3256fbb9
--- /dev/null
+++ b/Documentation/power/regulator/regulator.rst
@@ -0,0 +1,32 @@
+==========================
+Regulator Driver Interface
+==========================
+
+The regulator driver interface is relatively simple and designed to allow
+regulator drivers to register their services with the core framework.
+
+
+Registration
+============
+
+Drivers can register a regulator by calling::
+
+  struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
+					   const struct regulator_config *config);
+
+This will register the regulator's capabilities and operations to the regulator
+core.
+
+Regulators can be unregistered by calling::
+
+  void regulator_unregister(struct regulator_dev *rdev);
+
+
+Regulator Events
+================
+
+Regulators can send events (e.g. overtemperature, undervoltage, etc) to
+consumer drivers by calling::
+
+  int regulator_notifier_call_chain(struct regulator_dev *rdev,
+				    unsigned long event, void *data);
diff --git a/Documentation/power/regulator/regulator.txt b/Documentation/power/regulator/regulator.txt
deleted file mode 100644
index b17e5833ce21..000000000000
--- a/Documentation/power/regulator/regulator.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Regulator Driver Interface
-==========================
-
-The regulator driver interface is relatively simple and designed to allow
-regulator drivers to register their services with the core framework.
-
-
-Registration
-============
-
-Drivers can register a regulator by calling :-
-
-struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
-					 const struct regulator_config *config);
-
-This will register the regulator's capabilities and operations to the regulator
-core.
-
-Regulators can be unregistered by calling :-
-
-void regulator_unregister(struct regulator_dev *rdev);
-
-
-Regulator Events
-================
-Regulators can send events (e.g. overtemperature, undervoltage, etc) to
-consumer drivers by calling :-
-
-int regulator_notifier_call_chain(struct regulator_dev *rdev,
-				  unsigned long event, void *data);
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.rst
similarity index 89%
rename from Documentation/power/runtime_pm.txt
rename to Documentation/power/runtime_pm.rst
index 937e33c46211..2c2ec99b5088 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.rst
@@ -1,10 +1,15 @@
+==================================================
 Runtime Power Management Framework for I/O Devices
+==================================================
 
 (C) 2009-2011 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+
 (C) 2010 Alan Stern <stern@rowland.harvard.edu>
+
 (C) 2014 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 
 1. Introduction
+===============
 
 Support for runtime power management (runtime PM) of I/O devices is provided
 at the power management core (PM core) level by means of:
@@ -33,16 +38,17 @@ fields of 'struct dev_pm_info' and the core helper functions provided for
 runtime PM are described below.
 
 2. Device Runtime PM Callbacks
+==============================
 
-There are three device runtime PM callbacks defined in 'struct dev_pm_ops':
+There are three device runtime PM callbacks defined in 'struct dev_pm_ops'::
 
-struct dev_pm_ops {
+  struct dev_pm_ops {
 	...
 	int (*runtime_suspend)(struct device *dev);
 	int (*runtime_resume)(struct device *dev);
 	int (*runtime_idle)(struct device *dev);
 	...
-};
+  };
 
 The ->runtime_suspend(), ->runtime_resume() and ->runtime_idle() callbacks
 are executed by the PM core for the device's subsystem that may be either of
@@ -112,7 +118,7 @@ low-power state during the execution of the suspend callback, it is expected
 that remote wakeup will be enabled for the device.  Generally, remote wakeup
 should be enabled for all input devices put into low-power states at run time.
 
-The subsystem-level resume callback, if present, is _entirely_ _responsible_ for
+The subsystem-level resume callback, if present, is **entirely responsible** for
 handling the resume of the device as appropriate, which may, but need not
 include executing the device driver's own ->runtime_resume() callback (from the
 PM core's point of view it is not necessary to implement a ->runtime_resume()
@@ -197,95 +203,96 @@ rules:
     except for scheduled autosuspends.
 
 3. Runtime PM Device Fields
+===========================
 
 The following device runtime PM fields are present in 'struct dev_pm_info', as
 defined in include/linux/pm.h:
 
-  struct timer_list suspend_timer;
+  `struct timer_list suspend_timer;`
     - timer used for scheduling (delayed) suspend and autosuspend requests
 
-  unsigned long timer_expires;
+  `unsigned long timer_expires;`
     - timer expiration time, in jiffies (if this is different from zero, the
       timer is running and will expire at that time, otherwise the timer is not
       running)
 
-  struct work_struct work;
+  `struct work_struct work;`
     - work structure used for queuing up requests (i.e. work items in pm_wq)
 
-  wait_queue_head_t wait_queue;
+  `wait_queue_head_t wait_queue;`
     - wait queue used if any of the helper functions needs to wait for another
       one to complete
 
-  spinlock_t lock;
+  `spinlock_t lock;`
     - lock used for synchronization
 
-  atomic_t usage_count;
+  `atomic_t usage_count;`
     - the usage counter of the device
 
-  atomic_t child_count;
+  `atomic_t child_count;`
     - the count of 'active' children of the device
 
-  unsigned int ignore_children;
+  `unsigned int ignore_children;`
     - if set, the value of child_count is ignored (but still updated)
 
-  unsigned int disable_depth;
+  `unsigned int disable_depth;`
     - used for disabling the helper functions (they work normally if this is
       equal to zero); the initial value of it is 1 (i.e. runtime PM is
       initially disabled for all devices)
 
-  int runtime_error;
+  `int runtime_error;`
     - if set, there was a fatal error (one of the callbacks returned error code
       as described in Section 2), so the helper functions will not work until
       this flag is cleared; this is the error code returned by the failing
       callback
 
-  unsigned int idle_notification;
+  `unsigned int idle_notification;`
     - if set, ->runtime_idle() is being executed
 
-  unsigned int request_pending;
+  `unsigned int request_pending;`
     - if set, there's a pending request (i.e. a work item queued up into pm_wq)
 
-  enum rpm_request request;
+  `enum rpm_request request;`
     - type of request that's pending (valid if request_pending is set)
 
-  unsigned int deferred_resume;
+  `unsigned int deferred_resume;`
     - set if ->runtime_resume() is about to be run while ->runtime_suspend() is
       being executed for that device and it is not practical to wait for the
       suspend to complete; means "start a resume as soon as you've suspended"
 
-  enum rpm_status runtime_status;
+  `enum rpm_status runtime_status;`
     - the runtime PM status of the device; this field's initial value is
       RPM_SUSPENDED, which means that each device is initially regarded by the
       PM core as 'suspended', regardless of its real hardware status
 
-  unsigned int runtime_auto;
+  `unsigned int runtime_auto;`
     - if set, indicates that the user space has allowed the device driver to
       power manage the device at run time via the /sys/devices/.../power/control
-      interface; it may only be modified with the help of the pm_runtime_allow()
+      `interface;` it may only be modified with the help of the pm_runtime_allow()
       and pm_runtime_forbid() helper functions
 
-  unsigned int no_callbacks;
+  `unsigned int no_callbacks;`
     - indicates that the device does not use the runtime PM callbacks (see
       Section 8); it may be modified only by the pm_runtime_no_callbacks()
       helper function
 
-  unsigned int irq_safe;
+  `unsigned int irq_safe;`
     - indicates that the ->runtime_suspend() and ->runtime_resume() callbacks
       will be invoked with the spinlock held and interrupts disabled
 
-  unsigned int use_autosuspend;
+  `unsigned int use_autosuspend;`
     - indicates that the device's driver supports delayed autosuspend (see
       Section 9); it may be modified only by the
       pm_runtime{_dont}_use_autosuspend() helper functions
 
-  unsigned int timer_autosuspends;
+  `unsigned int timer_autosuspends;`
     - indicates that the PM core should attempt to carry out an autosuspend
       when the timer expires rather than a normal suspend
 
-  int autosuspend_delay;
+  `int autosuspend_delay;`
     - the delay time (in milliseconds) to be used for autosuspend
 
-  unsigned long last_busy;
+  `unsigned long last_busy;`
     - the time (in jiffies) when the pm_runtime_mark_last_busy() helper
       function was last called for this device; used in calculating inactivity
       periods for autosuspend
@@ -293,37 +300,38 @@ defined in include/linux/pm.h:
 All of the above fields are members of the 'power' member of 'struct device'.
 
 4. Runtime PM Device Helper Functions
+=====================================
 
 The following runtime PM helper functions are defined in
 drivers/base/power/runtime.c and include/linux/pm_runtime.h:
 
-  void pm_runtime_init(struct device *dev);
+  `void pm_runtime_init(struct device *dev);`
     - initialize the device runtime PM fields in 'struct dev_pm_info'
 
-  void pm_runtime_remove(struct device *dev);
+  `void pm_runtime_remove(struct device *dev);`
     - make sure that the runtime PM of the device will be disabled after
       removing the device from device hierarchy
 
-  int pm_runtime_idle(struct device *dev);
+  `int pm_runtime_idle(struct device *dev);`
     - execute the subsystem-level idle callback for the device; returns an
       error code on failure, where -EINPROGRESS means that ->runtime_idle() is
       already being executed; if there is no callback or the callback returns 0
       then run pm_runtime_autosuspend(dev) and return its result
 
-  int pm_runtime_suspend(struct device *dev);
+  `int pm_runtime_suspend(struct device *dev);`
     - execute the subsystem-level suspend callback for the device; returns 0 on
       success, 1 if the device's runtime PM status was already 'suspended', or
       error code on failure, where -EAGAIN or -EBUSY means it is safe to attempt
       to suspend the device again in future and -EACCES means that
       'power.disable_depth' is different from 0
 
-  int pm_runtime_autosuspend(struct device *dev);
+  `int pm_runtime_autosuspend(struct device *dev);`
     - same as pm_runtime_suspend() except that the autosuspend delay is taken
-      into account; if pm_runtime_autosuspend_expiration() says the delay has
+      `into account;` if pm_runtime_autosuspend_expiration() says the delay has
       not yet expired then an autosuspend is scheduled for the appropriate time
       and 0 is returned
 
-  int pm_runtime_resume(struct device *dev);
+  `int pm_runtime_resume(struct device *dev);`
     - execute the subsystem-level resume callback for the device; returns 0 on
       success, 1 if the device's runtime PM status was already 'active' or
       error code on failure, where -EAGAIN means it may be safe to attempt to
@@ -331,17 +339,17 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       checked additionally, and -EACCES means that 'power.disable_depth' is
       different from 0
 
-  int pm_request_idle(struct device *dev);
+  `int pm_request_idle(struct device *dev);`
     - submit a request to execute the subsystem-level idle callback for the
       device (the request is represented by a work item in pm_wq); returns 0 on
       success or error code if the request has not been queued up
 
-  int pm_request_autosuspend(struct device *dev);
+  `int pm_request_autosuspend(struct device *dev);`
     - schedule the execution of the subsystem-level suspend callback for the
       device when the autosuspend delay has expired; if the delay has already
       expired then the work item is queued up immediately
 
-  int pm_schedule_suspend(struct device *dev, unsigned int delay);
+  `int pm_schedule_suspend(struct device *dev, unsigned int delay);`
     - schedule the execution of the subsystem-level suspend callback for the
       device in future, where 'delay' is the time to wait before queuing up a
       suspend work item in pm_wq, in milliseconds (if 'delay' is zero, the work
@@ -351,58 +359,58 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       ->runtime_suspend() is already scheduled and not yet expired, the new
       value of 'delay' will be used as the time to wait
 
-  int pm_request_resume(struct device *dev);
+  `int pm_request_resume(struct device *dev);`
     - submit a request to execute the subsystem-level resume callback for the
       device (the request is represented by a work item in pm_wq); returns 0 on
       success, 1 if the device's runtime PM status was already 'active', or
       error code if the request hasn't been queued up
 
-  void pm_runtime_get_noresume(struct device *dev);
+  `void pm_runtime_get_noresume(struct device *dev);`
     - increment the device's usage counter
 
-  int pm_runtime_get(struct device *dev);
+  `int pm_runtime_get(struct device *dev);`
     - increment the device's usage counter, run pm_request_resume(dev) and
       return its result
 
-  int pm_runtime_get_sync(struct device *dev);
+  `int pm_runtime_get_sync(struct device *dev);`
     - increment the device's usage counter, run pm_runtime_resume(dev) and
       return its result
 
-  int pm_runtime_get_if_in_use(struct device *dev);
+  `int pm_runtime_get_if_in_use(struct device *dev);`
     - return -EINVAL if 'power.disable_depth' is nonzero; otherwise, if the
       runtime PM status is RPM_ACTIVE and the runtime PM usage counter is
       nonzero, increment the counter and return 1; otherwise return 0 without
       changing the counter
 
-  void pm_runtime_put_noidle(struct device *dev);
+  `void pm_runtime_put_noidle(struct device *dev);`
     - decrement the device's usage counter
 
-  int pm_runtime_put(struct device *dev);
+  `int pm_runtime_put(struct device *dev);`
     - decrement the device's usage counter; if the result is 0 then run
       pm_request_idle(dev) and return its result
 
-  int pm_runtime_put_autosuspend(struct device *dev);
+  `int pm_runtime_put_autosuspend(struct device *dev);`
     - decrement the device's usage counter; if the result is 0 then run
       pm_request_autosuspend(dev) and return its result
 
-  int pm_runtime_put_sync(struct device *dev);
+  `int pm_runtime_put_sync(struct device *dev);`
     - decrement the device's usage counter; if the result is 0 then run
       pm_runtime_idle(dev) and return its result
 
-  int pm_runtime_put_sync_suspend(struct device *dev);
+  `int pm_runtime_put_sync_suspend(struct device *dev);`
     - decrement the device's usage counter; if the result is 0 then run
       pm_runtime_suspend(dev) and return its result
 
-  int pm_runtime_put_sync_autosuspend(struct device *dev);
+  `int pm_runtime_put_sync_autosuspend(struct device *dev);`
     - decrement the device's usage counter; if the result is 0 then run
       pm_runtime_autosuspend(dev) and return its result
 
-  void pm_runtime_enable(struct device *dev);
+  `void pm_runtime_enable(struct device *dev);`
     - decrement the device's 'power.disable_depth' field; if that field is equal
       to zero, the runtime PM helper functions can execute subsystem-level
       callbacks described in Section 2 for the device
 
-  int pm_runtime_disable(struct device *dev);
+  `int pm_runtime_disable(struct device *dev);`
     - increment the device's 'power.disable_depth' field (if the value of that
       field was previously zero, this prevents subsystem-level runtime PM
       callbacks from being run for the device), make sure that all of the
@@ -411,7 +419,7 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       necessary to execute the subsystem-level resume callback for the device
       to satisfy that request, otherwise 0 is returned
 
-  int pm_runtime_barrier(struct device *dev);
+  `int pm_runtime_barrier(struct device *dev);`
     - check if there's a resume request pending for the device and resume it
       (synchronously) in that case, cancel any other pending runtime PM requests
       regarding it and wait for all runtime PM operations on it in progress to
@@ -419,10 +427,10 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       necessary to execute the subsystem-level resume callback for the device to
       satisfy that request, otherwise 0 is returned
 
-  void pm_suspend_ignore_children(struct device *dev, bool enable);
+  `void pm_suspend_ignore_children(struct device *dev, bool enable);`
     - set/unset the power.ignore_children flag of the device
 
-  int pm_runtime_set_active(struct device *dev);
+  `int pm_runtime_set_active(struct device *dev);`
     - clear the device's 'power.runtime_error' flag, set the device's runtime
       PM status to 'active' and update its parent's counter of 'active'
       children as appropriate (it is only valid to use this function if
@@ -430,61 +438,61 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       zero); it will fail and return error code if the device has a parent
       which is not active and the 'power.ignore_children' flag of which is unset
 
-  void pm_runtime_set_suspended(struct device *dev);
+  `void pm_runtime_set_suspended(struct device *dev);`
     - clear the device's 'power.runtime_error' flag, set the device's runtime
       PM status to 'suspended' and update its parent's counter of 'active'
       children as appropriate (it is only valid to use this function if
       'power.runtime_error' is set or 'power.disable_depth' is greater than
       zero)
 
-  bool pm_runtime_active(struct device *dev);
+  `bool pm_runtime_active(struct device *dev);`
     - return true if the device's runtime PM status is 'active' or its
       'power.disable_depth' field is not equal to zero, or false otherwise
 
-  bool pm_runtime_suspended(struct device *dev);
+  `bool pm_runtime_suspended(struct device *dev);`
     - return true if the device's runtime PM status is 'suspended' and its
       'power.disable_depth' field is equal to zero, or false otherwise
 
-  bool pm_runtime_status_suspended(struct device *dev);
+  `bool pm_runtime_status_suspended(struct device *dev);`
     - return true if the device's runtime PM status is 'suspended'
 
-  void pm_runtime_allow(struct device *dev);
+  `void pm_runtime_allow(struct device *dev);`
     - set the power.runtime_auto flag for the device and decrease its usage
       counter (used by the /sys/devices/.../power/control interface to
       effectively allow the device to be power managed at run time)
 
-  void pm_runtime_forbid(struct device *dev);
+  `void pm_runtime_forbid(struct device *dev);`
     - unset the power.runtime_auto flag for the device and increase its usage
       counter (used by the /sys/devices/.../power/control interface to
       effectively prevent the device from being power managed at run time)
 
-  void pm_runtime_no_callbacks(struct device *dev);
+  `void pm_runtime_no_callbacks(struct device *dev);`
     - set the power.no_callbacks flag for the device and remove the runtime
       PM attributes from /sys/devices/.../power (or prevent them from being
       added when the device is registered)
 
-  void pm_runtime_irq_safe(struct device *dev);
+  `void pm_runtime_irq_safe(struct device *dev);`
     - set the power.irq_safe flag for the device, causing the runtime-PM
       callbacks to be invoked with interrupts off
 
-  bool pm_runtime_is_irq_safe(struct device *dev);
+  `bool pm_runtime_is_irq_safe(struct device *dev);`
     - return true if power.irq_safe flag was set for the device, causing
       the runtime-PM callbacks to be invoked with interrupts off
 
-  void pm_runtime_mark_last_busy(struct device *dev);
+  `void pm_runtime_mark_last_busy(struct device *dev);`
     - set the power.last_busy field to the current time
 
-  void pm_runtime_use_autosuspend(struct device *dev);
+  `void pm_runtime_use_autosuspend(struct device *dev);`
     - set the power.use_autosuspend flag, enabling autosuspend delays; call
       pm_runtime_get_sync if the flag was previously cleared and
       power.autosuspend_delay is negative
 
-  void pm_runtime_dont_use_autosuspend(struct device *dev);
+  `void pm_runtime_dont_use_autosuspend(struct device *dev);`
     - clear the power.use_autosuspend flag, disabling autosuspend delays;
       decrement the device's usage counter if the flag was previously set and
       power.autosuspend_delay is negative; call pm_runtime_idle
 
-  void pm_runtime_set_autosuspend_delay(struct device *dev, int delay);
+  `void pm_runtime_set_autosuspend_delay(struct device *dev, int delay);`
     - set the power.autosuspend_delay value to 'delay' (expressed in
       milliseconds); if 'delay' is negative then runtime suspends are
       prevented; if power.use_autosuspend is set, pm_runtime_get_sync may be
@@ -493,7 +501,7 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       changed to or from a negative value; if power.use_autosuspend is clear,
       pm_runtime_idle is called
 
-  unsigned long pm_runtime_autosuspend_expiration(struct device *dev);
+  `unsigned long pm_runtime_autosuspend_expiration(struct device *dev);`
     - calculate the time when the current autosuspend delay period will expire,
       based on power.last_busy and power.autosuspend_delay; if the delay time
       is 1000 ms or larger then the expiration time is rounded up to the
@@ -503,36 +511,37 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
 
 It is safe to execute the following helper functions from interrupt context:
 
-pm_request_idle()
-pm_request_autosuspend()
-pm_schedule_suspend()
-pm_request_resume()
-pm_runtime_get_noresume()
-pm_runtime_get()
-pm_runtime_put_noidle()
-pm_runtime_put()
-pm_runtime_put_autosuspend()
-pm_runtime_enable()
-pm_suspend_ignore_children()
-pm_runtime_set_active()
-pm_runtime_set_suspended()
-pm_runtime_suspended()
-pm_runtime_mark_last_busy()
-pm_runtime_autosuspend_expiration()
+- pm_request_idle()
+- pm_request_autosuspend()
+- pm_schedule_suspend()
+- pm_request_resume()
+- pm_runtime_get_noresume()
+- pm_runtime_get()
+- pm_runtime_put_noidle()
+- pm_runtime_put()
+- pm_runtime_put_autosuspend()
+- pm_runtime_enable()
+- pm_suspend_ignore_children()
+- pm_runtime_set_active()
+- pm_runtime_set_suspended()
+- pm_runtime_suspended()
+- pm_runtime_mark_last_busy()
+- pm_runtime_autosuspend_expiration()
 
 If pm_runtime_irq_safe() has been called for a device then the following helper
 functions may also be used in interrupt context:
 
-pm_runtime_idle()
-pm_runtime_suspend()
-pm_runtime_autosuspend()
-pm_runtime_resume()
-pm_runtime_get_sync()
-pm_runtime_put_sync()
-pm_runtime_put_sync_suspend()
-pm_runtime_put_sync_autosuspend()
+- pm_runtime_idle()
+- pm_runtime_suspend()
+- pm_runtime_autosuspend()
+- pm_runtime_resume()
+- pm_runtime_get_sync()
+- pm_runtime_put_sync()
+- pm_runtime_put_sync_suspend()
+- pm_runtime_put_sync_autosuspend()
 
 5. Runtime PM Initialization, Device Probing and Removal
+========================================================
 
 Initially, the runtime PM is disabled for all devices, which means that the
 majority of the runtime PM helper functions described in Section 4 will return
@@ -608,6 +617,7 @@ manage the device at run time, the driver may confuse it by using
 pm_runtime_forbid() this way.
 
 6. Runtime PM and System Sleep
+==============================
 
 Runtime PM and system sleep (i.e., system suspend and hibernation, also known
 as suspend-to-RAM and suspend-to-disk) interact with each other in a couple of
@@ -647,9 +657,9 @@ brought back to full power during resume, then its runtime PM status will have
 to be updated to reflect the actual post-system sleep status.  The way to do
 this is:
 
-	pm_runtime_disable(dev);
-	pm_runtime_set_active(dev);
-	pm_runtime_enable(dev);
+	 - pm_runtime_disable(dev);
+	 - pm_runtime_set_active(dev);
+	 - pm_runtime_enable(dev);
 
 The PM core always increments the runtime usage counter before calling the
 ->suspend() callback and decrements it after calling the ->resume() callback.
@@ -705,66 +715,66 @@ Subsystems may wish to conserve code space by using the set of generic power
 management callbacks provided by the PM core, defined in
 driver/base/power/generic_ops.c:
 
-  int pm_generic_runtime_suspend(struct device *dev);
+  `int pm_generic_runtime_suspend(struct device *dev);`
     - invoke the ->runtime_suspend() callback provided by the driver of this
       device and return its result, or return 0 if not defined
 
-  int pm_generic_runtime_resume(struct device *dev);
+  `int pm_generic_runtime_resume(struct device *dev);`
     - invoke the ->runtime_resume() callback provided by the driver of this
       device and return its result, or return 0 if not defined
 
-  int pm_generic_suspend(struct device *dev);
+  `int pm_generic_suspend(struct device *dev);`
     - if the device has not been suspended at run time, invoke the ->suspend()
       callback provided by its driver and return its result, or return 0 if not
       defined
 
-  int pm_generic_suspend_noirq(struct device *dev);
+  `int pm_generic_suspend_noirq(struct device *dev);`
     - if pm_runtime_suspended(dev) returns "false", invoke the ->suspend_noirq()
       callback provided by the device's driver and return its result, or return
       0 if not defined
 
-  int pm_generic_resume(struct device *dev);
+  `int pm_generic_resume(struct device *dev);`
     - invoke the ->resume() callback provided by the driver of this device and,
       if successful, change the device's runtime PM status to 'active'
 
-  int pm_generic_resume_noirq(struct device *dev);
+  `int pm_generic_resume_noirq(struct device *dev);`
     - invoke the ->resume_noirq() callback provided by the driver of this device
 
-  int pm_generic_freeze(struct device *dev);
+  `int pm_generic_freeze(struct device *dev);`
     - if the device has not been suspended at run time, invoke the ->freeze()
       callback provided by its driver and return its result, or return 0 if not
       defined
 
-  int pm_generic_freeze_noirq(struct device *dev);
+  `int pm_generic_freeze_noirq(struct device *dev);`
     - if pm_runtime_suspended(dev) returns "false", invoke the ->freeze_noirq()
       callback provided by the device's driver and return its result, or return
       0 if not defined
 
-  int pm_generic_thaw(struct device *dev);
+  `int pm_generic_thaw(struct device *dev);`
     - if the device has not been suspended at run time, invoke the ->thaw()
       callback provided by its driver and return its result, or return 0 if not
       defined
 
-  int pm_generic_thaw_noirq(struct device *dev);
+  `int pm_generic_thaw_noirq(struct device *dev);`
     - if pm_runtime_suspended(dev) returns "false", invoke the ->thaw_noirq()
       callback provided by the device's driver and return its result, or return
       0 if not defined
 
-  int pm_generic_poweroff(struct device *dev);
+  `int pm_generic_poweroff(struct device *dev);`
     - if the device has not been suspended at run time, invoke the ->poweroff()
       callback provided by its driver and return its result, or return 0 if not
       defined
 
-  int pm_generic_poweroff_noirq(struct device *dev);
+  `int pm_generic_poweroff_noirq(struct device *dev);`
     - if pm_runtime_suspended(dev) returns "false", run the ->poweroff_noirq()
       callback provided by the device's driver and return its result, or return
       0 if not defined
 
-  int pm_generic_restore(struct device *dev);
+  `int pm_generic_restore(struct device *dev);`
     - invoke the ->restore() callback provided by the driver of this device and,
       if successful, change the device's runtime PM status to 'active'
 
-  int pm_generic_restore_noirq(struct device *dev);
+  `int pm_generic_restore_noirq(struct device *dev);`
     - invoke the ->restore_noirq() callback provided by the device's driver
 
 These functions are the defaults used by the PM core, if a subsystem doesn't
@@ -781,6 +791,7 @@ UNIVERSAL_DEV_PM_OPS macro defined in include/linux/pm.h (possibly setting its
 last argument to NULL).
 
 8. "No-Callback" Devices
+========================
 
 Some "devices" are only logical sub-devices of their parent and cannot be
 power-managed on their own.  (The prototype example is a USB interface.  Entire
@@ -807,6 +818,7 @@ parent must take responsibility for telling the device's driver when the
 parent's power state changes.
 
 9. Autosuspend, or automatically-delayed suspends
+=================================================
 
 Changing a device's power state isn't free; it requires both time and energy.
 A device should be put in a low-power state only when there's some reason to
@@ -832,8 +844,8 @@ registration the length should be controlled by user space, using the
 
 In order to use autosuspend, subsystems or drivers must call
 pm_runtime_use_autosuspend() (preferably before registering the device), and
-thereafter they should use the various *_autosuspend() helper functions instead
-of the non-autosuspend counterparts:
+thereafter they should use the various `*_autosuspend()` helper functions
+instead of the non-autosuspend counterparts::
 
 	Instead of: pm_runtime_suspend    use: pm_runtime_autosuspend;
 	Instead of: pm_schedule_suspend   use: pm_request_autosuspend;
@@ -858,7 +870,7 @@ The implementation is well suited for asynchronous use in interrupt contexts.
 However such use inevitably involves races, because the PM core can't
 synchronize ->runtime_suspend() callbacks with the arrival of I/O requests.
 This synchronization must be handled by the driver, using its private lock.
-Here is a schematic pseudo-code example:
+Here is a schematic pseudo-code example::
 
 	foo_read_or_write(struct foo_priv *foo, void *data)
 	{
diff --git a/Documentation/power/s2ram.txt b/Documentation/power/s2ram.rst
similarity index 92%
rename from Documentation/power/s2ram.txt
rename to Documentation/power/s2ram.rst
index 4685aee197fd..d739aa7c742c 100644
--- a/Documentation/power/s2ram.txt
+++ b/Documentation/power/s2ram.rst
@@ -1,7 +1,9 @@
-			How to get s2ram working
-			~~~~~~~~~~~~~~~~~~~~~~~~
-			2006 Linus Torvalds
-			2006 Pavel Machek
+========================
+How to get s2ram working
+========================
+
+2006 Linus Torvalds
+2006 Pavel Machek
 
 1) Check suspend.sf.net, program s2ram there has long whitelist of
    "known ok" machines, along with tricks to use on each one.
@@ -12,8 +14,8 @@
 
 3) You can use Linus' TRACE_RESUME infrastructure, described below.
 
-		      Using TRACE_RESUME
-		      ~~~~~~~~~~~~~~~~~~
+Using TRACE_RESUME
+~~~~~~~~~~~~~~~~~~
 
 I've been working at making the machines I have able to STR, and almost
 always it's a driver that is buggy. Thank God for the suspend/resume
@@ -27,7 +29,7 @@ machine that doesn't boot) is:
 
  - enable PM_DEBUG, and PM_TRACE
 
- - use a script like this:
+ - use a script like this::
 
 	#!/bin/sh
 	sync
@@ -38,7 +40,7 @@ machine that doesn't boot) is:
 
  - if it doesn't come back up (which is usually the problem), reboot by
    holding the power button down, and look at the dmesg output for things
-   like
+   like::
 
 	Magic number: 4:156:725
 	hash matches drivers/base/power/resume.c:28
@@ -52,7 +54,7 @@ machine that doesn't boot) is:
    If no device matches the hash (or any matches appear to be false positives),
    the culprit may be a device from a loadable kernel module that is not loaded
    until after the hash is checked. You can check the hash against the current
-   devices again after more modules are loaded using sysfs:
+   devices again after more modules are loaded using sysfs::
 
 	cat /sys/power/pm_trace_dev_match
 
diff --git a/Documentation/power/suspend-and-cpuhotplug.txt b/Documentation/power/suspend-and-cpuhotplug.rst
similarity index 90%
rename from Documentation/power/suspend-and-cpuhotplug.txt
rename to Documentation/power/suspend-and-cpuhotplug.rst
index a8751b8df10e..9df664f5423a 100644
--- a/Documentation/power/suspend-and-cpuhotplug.txt
+++ b/Documentation/power/suspend-and-cpuhotplug.rst
@@ -1,10 +1,15 @@
+====================================================================
 Interaction of Suspend code (S3) with the CPU hotplug infrastructure
+====================================================================
 
-     (C) 2011 - 2014 Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
+(C) 2011 - 2014 Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
 
 
-I. How does the regular CPU hotplug code differ from how the Suspend-to-RAM
-   infrastructure uses it internally? And where do they share common code?
+I. Differences between CPU hotplug and Suspend-to-RAM
+======================================================
+
+How does the regular CPU hotplug code differ from how the Suspend-to-RAM
+infrastructure uses it internally? And where do they share common code?
 
 Well, a picture is worth a thousand words... So ASCII art follows :-)
 
@@ -16,13 +21,13 @@ of describing where they take different paths and where they share code.
 What happens when regular CPU hotplug and Suspend-to-RAM race with each other
 is not depicted here.]
 
-On a high level, the suspend-resume cycle goes like this:
+On a high level, the suspend-resume cycle goes like this::
 
-|Freeze| -> |Disable nonboot| -> |Do suspend| -> |Enable nonboot| -> |Thaw |
-|tasks |    |     cpus      |    |          |    |     cpus     |    |tasks|
+  |Freeze| -> |Disable nonboot| -> |Do suspend| -> |Enable nonboot| -> |Thaw |
+  |tasks |    |     cpus      |    |          |    |     cpus     |    |tasks|
 
 
-More details follow:
+More details follow::
 
                                 Suspend call path
                                 -----------------
@@ -87,7 +92,9 @@ More details follow:
 
 Resuming back is likewise, with the counterparts being (in the order of
 execution during resume):
-* enable_nonboot_cpus() which involves:
+
+* enable_nonboot_cpus() which involves::
+
    |  Acquire cpu_add_remove_lock
    |  Decrease cpu_hotplug_disabled, thereby enabling regular cpu hotplug
    |  Call _cpu_up() [for all those cpus in the frozen_cpus mask, in a loop]
@@ -101,7 +108,7 @@ execution during resume):
 
 It is to be noted here that the system_transition_mutex lock is acquired at the very
 beginning, when we are just starting out to suspend, and then released only
-after the entire cycle is complete (i.e., suspend + resume).
+after the entire cycle is complete (i.e., suspend + resume)::
 
 
 
@@ -152,16 +159,16 @@ with the 'tasks_frozen' argument set to 1.
 
 
 Important files and functions/entry points:
-------------------------------------------
+-------------------------------------------
 
-kernel/power/process.c : freeze_processes(), thaw_processes()
-kernel/power/suspend.c : suspend_prepare(), suspend_enter(), suspend_finish()
-kernel/cpu.c: cpu_[up|down](), _cpu_[up|down](), [disable|enable]_nonboot_cpus()
+- kernel/power/process.c : freeze_processes(), thaw_processes()
+- kernel/power/suspend.c : suspend_prepare(), suspend_enter(), suspend_finish()
+- kernel/cpu.c: cpu_[up|down](), _cpu_[up|down](), [disable|enable]_nonboot_cpus()
 
 
 
 II. What are the issues involved in CPU hotplug?
-    -------------------------------------------
+------------------------------------------------
 
 There are some interesting situations involving CPU hotplug and microcode
 update on the CPUs, as discussed below:
@@ -243,8 +250,11 @@ d. Handling microcode update during suspend/hibernate:
    cycles).
 
 
-III. Are there any known problems when regular CPU hotplug and suspend race
-     with each other?
+III. Known problems
+===================
+
+Are there any known problems when regular CPU hotplug and suspend race
+with each other?
 
 Yes, they are listed below:
 
diff --git a/Documentation/power/suspend-and-interrupts.txt b/Documentation/power/suspend-and-interrupts.rst
similarity index 98%
rename from Documentation/power/suspend-and-interrupts.txt
rename to Documentation/power/suspend-and-interrupts.rst
index 8afb29a8604a..4cda6617709a 100644
--- a/Documentation/power/suspend-and-interrupts.txt
+++ b/Documentation/power/suspend-and-interrupts.rst
@@ -1,4 +1,6 @@
+====================================
 System Suspend and Device Interrupts
+====================================
 
 Copyright (C) 2014 Intel Corp.
 Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
diff --git a/Documentation/power/swsusp-and-swap-files.txt b/Documentation/power/swsusp-and-swap-files.rst
similarity index 83%
rename from Documentation/power/swsusp-and-swap-files.txt
rename to Documentation/power/swsusp-and-swap-files.rst
index f281886de490..a33a2919dbe4 100644
--- a/Documentation/power/swsusp-and-swap-files.txt
+++ b/Documentation/power/swsusp-and-swap-files.rst
@@ -1,4 +1,7 @@
+===============================================
 Using swap files with software suspend (swsusp)
+===============================================
+
 	(C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
 
 The Linux kernel handles swap files almost in the same way as it handles swap
@@ -21,20 +24,20 @@ units.
 
 In order to use a swap file with swsusp, you need to:
 
-1) Create the swap file and make it active, eg.
+1) Create the swap file and make it active, eg.::
 
-# dd if=/dev/zero of=<swap_file_path> bs=1024 count=<swap_file_size_in_k>
-# mkswap <swap_file_path>
-# swapon <swap_file_path>
+    # dd if=/dev/zero of=<swap_file_path> bs=1024 count=<swap_file_size_in_k>
+    # mkswap <swap_file_path>
+    # swapon <swap_file_path>
 
 2) Use an application that will bmap the swap file with the help of the
 FIBMAP ioctl and determine the location of the file's swap header, as the
 offset, in <PAGE_SIZE> units, from the beginning of the partition which
 holds the swap file.
 
-3) Add the following parameters to the kernel command line:
+3) Add the following parameters to the kernel command line::
 
-resume=<swap_file_partition> resume_offset=<swap_file_offset>
+    resume=<swap_file_partition> resume_offset=<swap_file_offset>
 
 where <swap_file_partition> is the partition on which the swap file is located
 and <swap_file_offset> is the offset of the swap header determined by the
@@ -46,7 +49,7 @@ OR
 
 Use a userland suspend application that will set the partition and offset
 with the help of the SNAPSHOT_SET_SWAP_AREA ioctl described in
-Documentation/power/userland-swsusp.txt (this is the only method to suspend
+Documentation/power/userland-swsusp.rst (this is the only method to suspend
 to a swap file allowing the resume to be initiated from an initrd or initramfs
 image).
 
diff --git a/Documentation/power/swsusp-dmcrypt.txt b/Documentation/power/swsusp-dmcrypt.rst
similarity index 67%
rename from Documentation/power/swsusp-dmcrypt.txt
rename to Documentation/power/swsusp-dmcrypt.rst
index b802fbfd95ef..426df59172cd 100644
--- a/Documentation/power/swsusp-dmcrypt.txt
+++ b/Documentation/power/swsusp-dmcrypt.rst
@@ -1,13 +1,15 @@
+=======================================
+How to use dm-crypt and swsusp together
+=======================================
+
 Author: Andreas Steinmetz <ast@domdv.de>
 
 
-How to use dm-crypt and swsusp together:
-========================================
 
 Some prerequisites:
 You know how dm-crypt works. If not, visit the following web page:
 http://www.saout.de/misc/dm-crypt/
-You have read Documentation/power/swsusp.txt and understand it.
+You have read Documentation/power/swsusp.rst and understand it.
 You did read Documentation/admin-guide/initrd.rst and know how an initrd works.
 You know how to create or how to modify an initrd.
 
@@ -29,23 +31,23 @@ a way that the swap device you suspend to/resume from has
 always the same major/minor within the initrd as well as
 within your running system. The easiest way to achieve this is
 to always set up this swap device first with dmsetup, so that
-it will always look like the following:
+it will always look like the following::
 
-brw-------  1 root root 254, 0 Jul 28 13:37 /dev/mapper/swap0
+  brw-------  1 root root 254, 0 Jul 28 13:37 /dev/mapper/swap0
 
 Now set up your kernel to use /dev/mapper/swap0 as the default
-resume partition, so your kernel .config contains:
+resume partition, so your kernel .config contains::
 
-CONFIG_PM_STD_PARTITION="/dev/mapper/swap0"
+  CONFIG_PM_STD_PARTITION="/dev/mapper/swap0"
 
 Prepare your boot loader to use the initrd you will create or
 modify. For lilo the simplest setup looks like the following
-lines:
+lines::
 
-image=/boot/vmlinuz
-initrd=/boot/initrd.gz
-label=linux
-append="root=/dev/ram0 init=/linuxrc rw"
+  image=/boot/vmlinuz
+  initrd=/boot/initrd.gz
+  label=linux
+  append="root=/dev/ram0 init=/linuxrc rw"
 
 Finally you need to create or modify your initrd. Lets assume
 you create an initrd that reads the required dm-crypt setup
@@ -53,66 +55,66 @@ from a pcmcia flash disk card. The card is formatted with an ext2
 fs which resides on /dev/hde1 when the card is inserted. The
 card contains at least the encrypted swap setup in a file
 named "swapkey". /etc/fstab of your initrd contains something
-like the following:
+like the following::
 
-/dev/hda1   /mnt    ext3      ro                            0 0
-none        /proc   proc      defaults,noatime,nodiratime   0 0
-none        /sys    sysfs     defaults,noatime,nodiratime   0 0
+  /dev/hda1   /mnt    ext3      ro                            0 0
+  none        /proc   proc      defaults,noatime,nodiratime   0 0
+  none        /sys    sysfs     defaults,noatime,nodiratime   0 0
 
 /dev/hda1 contains an unencrypted mini system that sets up all
 of your crypto devices, again by reading the setup from the
 pcmcia flash disk. What follows now is a /linuxrc for your
 initrd that allows you to resume from encrypted swap and that
 continues boot with your mini system on /dev/hda1 if resume
-does not happen:
+does not happen::
 
-#!/bin/sh
-PATH=/sbin:/bin:/usr/sbin:/usr/bin
-mount /proc
-mount /sys
-mapped=0
-noresume=`grep -c noresume /proc/cmdline`
-if [ "$*" != "" ]
-then
-  noresume=1
-fi
-dmesg -n 1
-/sbin/cardmgr -q
-for i in 1 2 3 4 5 6 7 8 9 0
-do
-  if [ -f /proc/ide/hde/media ]
+  #!/bin/sh
+  PATH=/sbin:/bin:/usr/sbin:/usr/bin
+  mount /proc
+  mount /sys
+  mapped=0
+  noresume=`grep -c noresume /proc/cmdline`
+  if [ "$*" != "" ]
   then
+    noresume=1
+  fi
+  dmesg -n 1
+  /sbin/cardmgr -q
+  for i in 1 2 3 4 5 6 7 8 9 0
+  do
+    if [ -f /proc/ide/hde/media ]
+    then
+      usleep 500000
+      mount -t ext2 -o ro /dev/hde1 /mnt
+      if [ -f /mnt/swapkey ]
+      then
+        dmsetup create swap0 /mnt/swapkey > /dev/null 2>&1 && mapped=1
+      fi
+      umount /mnt
+      break
+    fi
     usleep 500000
-    mount -t ext2 -o ro /dev/hde1 /mnt
-    if [ -f /mnt/swapkey ]
+  done
+  killproc /sbin/cardmgr
+  dmesg -n 6
+  if [ $mapped = 1 ]
+  then
+    if [ $noresume != 0 ]
     then
-      dmsetup create swap0 /mnt/swapkey > /dev/null 2>&1 && mapped=1
+      mkswap /dev/mapper/swap0 > /dev/null 2>&1
     fi
-    umount /mnt
-    break
+    echo 254:0 > /sys/power/resume
+    dmsetup remove swap0
   fi
-  usleep 500000
-done
-killproc /sbin/cardmgr
-dmesg -n 6
-if [ $mapped = 1 ]
-then
-  if [ $noresume != 0 ]
-  then
-    mkswap /dev/mapper/swap0 > /dev/null 2>&1
-  fi
-  echo 254:0 > /sys/power/resume
-  dmsetup remove swap0
-fi
-umount /sys
-mount /mnt
-umount /proc
-cd /mnt
-pivot_root . mnt
-mount /proc
-umount -l /mnt
-umount /proc
-exec chroot . /sbin/init $* < dev/console > dev/console 2>&1
+  umount /sys
+  mount /mnt
+  umount /proc
+  cd /mnt
+  pivot_root . mnt
+  mount /proc
+  umount -l /mnt
+  umount /proc
+  exec chroot . /sbin/init $* < dev/console > dev/console 2>&1
 
 Please don't mind the weird loop above, busybox's msh doesn't know
 the let statement. Now, what is happening in the script?
diff --git a/Documentation/power/swsusp.rst b/Documentation/power/swsusp.rst
new file mode 100644
index 000000000000..d000312f6965
--- /dev/null
+++ b/Documentation/power/swsusp.rst
@@ -0,0 +1,501 @@
+============
+Swap suspend
+============
+
+Some warnings, first.
+
+.. warning::
+
+   **BIG FAT WARNING**
+
+   If you touch anything on disk between suspend and resume...
+				...kiss your data goodbye.
+
+   If you do resume from initrd after your filesystems are mounted...
+				...bye bye root partition.
+
+			[this is actually same case as above]
+
+   If you have unsupported ( ) devices using DMA, you may have some
+   problems. If your disk driver does not support suspend... (IDE does),
+   it may cause some problems, too. If you change kernel command line
+   between suspend and resume, it may do something wrong. If you change
+   your hardware while system is suspended... well, it was not good idea;
+   but it will probably only crash.
+
+   ( ) suspend/resume support is needed to make it safe.
+
+   If you have any filesystems on USB devices mounted before software suspend,
+   they won't be accessible after resume and you may lose data, as though
+   you have unplugged the USB devices with mounted filesystems on them;
+   see the FAQ below for details.  (This is not true for more traditional
+   power states like "standby", which normally don't turn USB off.)
+
+Swap partition:
+  You need to append resume=/dev/your_swap_partition to kernel command
+  line or specify it using /sys/power/resume.
+
+Swap file:
+  If using a swapfile you can also specify a resume offset using
+  resume_offset=<number> on the kernel command line or specify it
+  in /sys/power/resume_offset.
+
+After preparing then you suspend by::
+
+	echo shutdown > /sys/power/disk; echo disk > /sys/power/state
+
+- If you feel ACPI works pretty well on your system, you might try::
+
+	echo platform > /sys/power/disk; echo disk > /sys/power/state
+
+- If you would like to write hibernation image to swap and then suspend
+  to RAM (provided your platform supports it), you can try::
+
+	echo suspend > /sys/power/disk; echo disk > /sys/power/state
+
+- If you have SATA disks, you'll need recent kernels with SATA suspend
+  support. For suspend and resume to work, make sure your disk drivers
+  are built into kernel -- not modules. [There's way to make
+  suspend/resume with modular disk drivers, see FAQ, but you probably
+  should not do that.]
+
+If you want to limit the suspend image size to N bytes, do::
+
+	echo N > /sys/power/image_size
+
+before suspend (it is limited to around 2/5 of available RAM by default).
+
+- The resume process checks for the presence of the resume device,
+  if found, it then checks the contents for the hibernation image signature.
+  If both are found, it resumes the hibernation image.
+
+- The resume process may be triggered in two ways:
+
+  1) During lateinit:  If resume=/dev/your_swap_partition is specified on
+     the kernel command line, lateinit runs the resume process.  If the
+     resume device has not been probed yet, the resume process fails and
+     bootup continues.
+  2) Manually from an initrd or initramfs:  May be run from
+     the init script by using the /sys/power/resume file.  It is vital
+     that this be done prior to remounting any filesystems (even as
+     read-only) otherwise data may be corrupted.
+
+Article about goals and implementation of Software Suspend for Linux
+====================================================================
+
+Author: Gábor Kuti
+Last revised: 2003-10-20 by Pavel Machek
+
+Idea and goals to achieve
+-------------------------
+
+Nowadays it is common in several laptops that they have a suspend button. It
+saves the state of the machine to a filesystem or to a partition and switches
+to standby mode. Later resuming the machine the saved state is loaded back to
+ram and the machine can continue its work. It has two real benefits. First we
+save ourselves the time machine goes down and later boots up, energy costs
+are real high when running from batteries. The other gain is that we don't have
+to interrupt our programs so processes that are calculating something for a long
+time shouldn't need to be written interruptible.
+
+swsusp saves the state of the machine into active swaps and then reboots or
+powerdowns.  You must explicitly specify the swap partition to resume from with
+`resume=` kernel option. If signature is found it loads and restores saved
+state. If the option `noresume` is specified as a boot parameter, it skips
+the resuming.  If the option `hibernate=nocompress` is specified as a boot
+parameter, it saves hibernation image without compression.
+
+In the meantime while the system is suspended you should not add/remove any
+of the hardware, write to the filesystems, etc.
+
+Sleep states summary
+====================
+
+There are three different interfaces you can use, /proc/acpi should
+work like this:
+
+In a really perfect world::
+
+  echo 1 > /proc/acpi/sleep       # for standby
+  echo 2 > /proc/acpi/sleep       # for suspend to ram
+  echo 3 > /proc/acpi/sleep       # for suspend to ram, but with more power conservative
+  echo 4 > /proc/acpi/sleep       # for suspend to disk
+  echo 5 > /proc/acpi/sleep       # for shutdown unfriendly the system
+
+and perhaps::
+
+  echo 4b > /proc/acpi/sleep      # for suspend to disk via s4bios
+
+Frequently Asked Questions
+==========================
+
+Q:
+  well, suspending a server is IMHO a really stupid thing,
+  but... (Diego Zuccato):
+
+A:
+  You bought new UPS for your server. How do you install it without
+  bringing machine down? Suspend to disk, rearrange power cables,
+  resume.
+
+  You have your server on UPS. Power died, and UPS is indicating 30
+  seconds to failure. What do you do? Suspend to disk.
+
+
+Q:
+  Maybe I'm missing something, but why don't the regular I/O paths work?
+
+A:
+  We do use the regular I/O paths. However we cannot restore the data
+  to its original location as we load it. That would create an
+  inconsistent kernel state which would certainly result in an oops.
+  Instead, we load the image into unused memory and then atomically copy
+  it back to it original location. This implies, of course, a maximum
+  image size of half the amount of memory.
+
+  There are two solutions to this:
+
+  * require half of memory to be free during suspend. That way you can
+    read "new" data onto free spots, then cli and copy
+
+  * assume we had special "polling" ide driver that only uses memory
+    between 0-640KB. That way, I'd have to make sure that 0-640KB is free
+    during suspending, but otherwise it would work...
+
+  suspend2 shares this fundamental limitation, but does not include user
+  data and disk caches into "used memory" by saving them in
+  advance. That means that the limitation goes away in practice.
+
+Q:
+  Does linux support ACPI S4?
+
+A:
+  Yes. That's what echo platform > /sys/power/disk does.
+
+Q:
+  What is 'suspend2'?
+
+A:
+  suspend2 is 'Software Suspend 2', a forked implementation of
+  suspend-to-disk which is available as separate patches for 2.4 and 2.6
+  kernels from swsusp.sourceforge.net. It includes support for SMP, 4GB
+  highmem and preemption. It also has a extensible architecture that
+  allows for arbitrary transformations on the image (compression,
+  encryption) and arbitrary backends for writing the image (eg to swap
+  or an NFS share[Work In Progress]). Questions regarding suspend2
+  should be sent to the mailing list available through the suspend2
+  website, and not to the Linux Kernel Mailing List. We are working
+  toward merging suspend2 into the mainline kernel.
+
+Q:
+  What is the freezing of tasks and why are we using it?
+
+A:
+  The freezing of tasks is a mechanism by which user space processes and some
+  kernel threads are controlled during hibernation or system-wide suspend (on some
+  architectures).  See freezing-of-tasks.txt for details.
+
+Q:
+  What is the difference between "platform" and "shutdown"?
+
+A:
+  shutdown:
+	save state in linux, then tell bios to powerdown
+
+  platform:
+	save state in linux, then tell bios to powerdown and blink
+        "suspended led"
+
+  "platform" is actually right thing to do where supported, but
+  "shutdown" is most reliable (except on ACPI systems).
+
+Q:
+  I do not understand why you have such strong objections to idea of
+  selective suspend.
+
+A:
+  Do selective suspend during runtime power management, that's okay. But
+  it's useless for suspend-to-disk. (And I do not see how you could use
+  it for suspend-to-ram, I hope you do not want that).
+
+  Lets see, so you suggest to
+
+  * SUSPEND all but swap device and parents
+  * Snapshot
+  * Write image to disk
+  * SUSPEND swap device and parents
+  * Powerdown
+
+  Oh no, that does not work, if swap device or its parents uses DMA,
+  you've corrupted data. You'd have to do
+
+  * SUSPEND all but swap device and parents
+  * FREEZE swap device and parents
+  * Snapshot
+  * UNFREEZE swap device and parents
+  * Write
+  * SUSPEND swap device and parents
+
+  Which means that you still need that FREEZE state, and you get more
+  complicated code. (And I have not yet introduce details like system
+  devices).
+
+Q:
+  There don't seem to be any generally useful behavioral
+  distinctions between SUSPEND and FREEZE.
+
+A:
+  Doing SUSPEND when you are asked to do FREEZE is always correct,
+  but it may be unnecessarily slow. If you want your driver to stay simple,
+  slowness may not matter to you. It can always be fixed later.
+
+  For devices like disk it does matter, you do not want to spindown for
+  FREEZE.
+
+Q:
+  After resuming, system is paging heavily, leading to very bad interactivity.
+
+A:
+  Try running::
+
+    cat /proc/[0-9]*/maps | grep / | sed 's:.* /:/:' | sort -u | while read file
+    do
+      test -f "$file" && cat "$file" > /dev/null
+    done
+
+  after resume. swapoff -a; swapon -a may also be useful.
+
+Q:
+  What happens to devices during swsusp? They seem to be resumed
+  during system suspend?
+
+A:
+  That's correct. We need to resume them if we want to write image to
+  disk. Whole sequence goes like
+
+      **Suspend part**
+
+      running system, user asks for suspend-to-disk
+
+      user processes are stopped
+
+      suspend(PMSG_FREEZE): devices are frozen so that they don't interfere
+      with state snapshot
+
+      state snapshot: copy of whole used memory is taken with interrupts disabled
+
+      resume(): devices are woken up so that we can write image to swap
+
+      write image to swap
+
+      suspend(PMSG_SUSPEND): suspend devices so that we can power off
+
+      turn the power off
+
+      **Resume part**
+
+      (is actually pretty similar)
+
+      running system, user asks for suspend-to-disk
+
+      user processes are stopped (in common case there are none,
+      but with resume-from-initrd, no one knows)
+
+      read image from disk
+
+      suspend(PMSG_FREEZE): devices are frozen so that they don't interfere
+      with image restoration
+
+      image restoration: rewrite memory with image
+
+      resume(): devices are woken up so that system can continue
+
+      thaw all user processes
+
+Q:
+  What is this 'Encrypt suspend image' for?
+
+A:
+  First of all: it is not a replacement for dm-crypt encrypted swap.
+  It cannot protect your computer while it is suspended. Instead it does
+  protect from leaking sensitive data after resume from suspend.
+
+  Think of the following: you suspend while an application is running
+  that keeps sensitive data in memory. The application itself prevents
+  the data from being swapped out. Suspend, however, must write these
+  data to swap to be able to resume later on. Without suspend encryption
+  your sensitive data are then stored in plaintext on disk.  This means
+  that after resume your sensitive data are accessible to all
+  applications having direct access to the swap device which was used
+  for suspend. If you don't need swap after resume these data can remain
+  on disk virtually forever. Thus it can happen that your system gets
+  broken in weeks later and sensitive data which you thought were
+  encrypted and protected are retrieved and stolen from the swap device.
+  To prevent this situation you should use 'Encrypt suspend image'.
+
+  During suspend a temporary key is created and this key is used to
+  encrypt the data written to disk. When, during resume, the data was
+  read back into memory the temporary key is destroyed which simply
+  means that all data written to disk during suspend are then
+  inaccessible so they can't be stolen later on.  The only thing that
+  you must then take care of is that you call 'mkswap' for the swap
+  partition used for suspend as early as possible during regular
+  boot. This asserts that any temporary key from an oopsed suspend or
+  from a failed or aborted resume is erased from the swap device.
+
+  As a rule of thumb use encrypted swap to protect your data while your
+  system is shut down or suspended. Additionally use the encrypted
+  suspend image to prevent sensitive data from being stolen after
+  resume.
+
+Q:
+  Can I suspend to a swap file?
+
+A:
+  Generally, yes, you can.  However, it requires you to use the "resume=" and
+  "resume_offset=" kernel command line parameters, so the resume from a swap file
+  cannot be initiated from an initrd or initramfs image.  See
+  swsusp-and-swap-files.txt for details.
+
+Q:
+  Is there a maximum system RAM size that is supported by swsusp?
+
+A:
+  It should work okay with highmem.
+
+Q:
+  Does swsusp (to disk) use only one swap partition or can it use
+  multiple swap partitions (aggregate them into one logical space)?
+
+A:
+  Only one swap partition, sorry.
+
+Q:
+  If my application(s) causes lots of memory & swap space to be used
+  (over half of the total system RAM), is it correct that it is likely
+  to be useless to try to suspend to disk while that app is running?
+
+A:
+  No, it should work okay, as long as your app does not mlock()
+  it. Just prepare big enough swap partition.
+
+Q:
+  What information is useful for debugging suspend-to-disk problems?
+
+A:
+  Well, last messages on the screen are always useful. If something
+  is broken, it is usually some kernel driver, therefore trying with as
+  little as possible modules loaded helps a lot. I also prefer people to
+  suspend from console, preferably without X running. Booting with
+  init=/bin/bash, then swapon and starting suspend sequence manually
+  usually does the trick. Then it is good idea to try with latest
+  vanilla kernel.
+
+Q:
+  How can distributions ship a swsusp-supporting kernel with modular
+  disk drivers (especially SATA)?
+
+A:
+  Well, it can be done, load the drivers, then do echo into
+  /sys/power/resume file from initrd. Be sure not to mount
+  anything, not even read-only mount, or you are going to lose your
+  data.
+
+Q:
+  How do I make suspend more verbose?
+
+A:
+  If you want to see any non-error kernel messages on the virtual
+  terminal the kernel switches to during suspend, you have to set the
+  kernel console loglevel to at least 4 (KERN_WARNING), for example by
+  doing::
+
+	# save the old loglevel
+	read LOGLEVEL DUMMY < /proc/sys/kernel/printk
+	# set the loglevel so we see the progress bar.
+	# if the level is higher than needed, we leave it alone.
+	if [ $LOGLEVEL -lt 5 ]; then
+	        echo 5 > /proc/sys/kernel/printk
+		fi
+
+        IMG_SZ=0
+        read IMG_SZ < /sys/power/image_size
+        echo -n disk > /sys/power/state
+        RET=$?
+        #
+        # the logic here is:
+        # if image_size > 0 (without kernel support, IMG_SZ will be zero),
+        # then try again with image_size set to zero.
+	if [ $RET -ne 0 -a $IMG_SZ -ne 0 ]; then # try again with minimal image size
+                echo 0 > /sys/power/image_size
+                echo -n disk > /sys/power/state
+                RET=$?
+        fi
+
+	# restore previous loglevel
+	echo $LOGLEVEL > /proc/sys/kernel/printk
+	exit $RET
+
+Q:
+  Is this true that if I have a mounted filesystem on a USB device and
+  I suspend to disk, I can lose data unless the filesystem has been mounted
+  with "sync"?
+
+A:
+  That's right ... if you disconnect that device, you may lose data.
+  In fact, even with "-o sync" you can lose data if your programs have
+  information in buffers they haven't written out to a disk you disconnect,
+  or if you disconnect before the device finished saving data you wrote.
+
+  Software suspend normally powers down USB controllers, which is equivalent
+  to disconnecting all USB devices attached to your system.
+
+  Your system might well support low-power modes for its USB controllers
+  while the system is asleep, maintaining the connection, using true sleep
+  modes like "suspend-to-RAM" or "standby".  (Don't write "disk" to the
+  /sys/power/state file; write "standby" or "mem".)  We've not seen any
+  hardware that can use these modes through software suspend, although in
+  theory some systems might support "platform" modes that won't break the
+  USB connections.
+
+  Remember that it's always a bad idea to unplug a disk drive containing a
+  mounted filesystem.  That's true even when your system is asleep!  The
+  safest thing is to unmount all filesystems on removable media (such USB,
+  Firewire, CompactFlash, MMC, external SATA, or even IDE hotplug bays)
+  before suspending; then remount them after resuming.
+
+  There is a work-around for this problem.  For more information, see
+  Documentation/driver-api/usb/persist.rst.
+
+Q:
+  Can I suspend-to-disk using a swap partition under LVM?
+
+A:
+  Yes and No.  You can suspend successfully, but the kernel will not be able
+  to resume on its own.  You need an initramfs that can recognize the resume
+  situation, activate the logical volume containing the swap volume (but not
+  touch any filesystems!), and eventually call::
+
+    echo -n "$major:$minor" > /sys/power/resume
+
+  where $major and $minor are the respective major and minor device numbers of
+  the swap volume.
+
+  uswsusp works with LVM, too.  See http://suspend.sourceforge.net/
+
+Q:
+  I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were
+  compiled with the similar configuration files. Anyway I found that
+  suspend to disk (and resume) is much slower on 2.6.16 compared to
+  2.6.15. Any idea for why that might happen or how can I speed it up?
+
+A:
+  This is because the size of the suspend image is now greater than
+  for 2.6.15 (by saving more data we can get more responsive system
+  after resume).
+
+  There's the /sys/power/image_size knob that controls the size of the
+  image.  If you set it to 0 (eg. by echo 0 > /sys/power/image_size as
+  root), the 2.6.15 behavior should be restored.  If it is still too
+  slow, take a look at suspend.sf.net -- userland suspend is faster and
+  supports LZF compression to speed it up further.
diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt
deleted file mode 100644
index 236d1fb13640..000000000000
--- a/Documentation/power/swsusp.txt
+++ /dev/null
@@ -1,446 +0,0 @@
-Some warnings, first.
-
- * BIG FAT WARNING *********************************************************
- *
- * If you touch anything on disk between suspend and resume...
- *				...kiss your data goodbye.
- *
- * If you do resume from initrd after your filesystems are mounted...
- *				...bye bye root partition.
- *			[this is actually same case as above]
- *
- * If you have unsupported (*) devices using DMA, you may have some
- * problems. If your disk driver does not support suspend... (IDE does),
- * it may cause some problems, too. If you change kernel command line
- * between suspend and resume, it may do something wrong. If you change
- * your hardware while system is suspended... well, it was not good idea;
- * but it will probably only crash.
- *
- * (*) suspend/resume support is needed to make it safe.
- *
- * If you have any filesystems on USB devices mounted before software suspend,
- * they won't be accessible after resume and you may lose data, as though
- * you have unplugged the USB devices with mounted filesystems on them;
- * see the FAQ below for details.  (This is not true for more traditional
- * power states like "standby", which normally don't turn USB off.)
-
-Swap partition:
-You need to append resume=/dev/your_swap_partition to kernel command
-line or specify it using /sys/power/resume.
-
-Swap file:
-If using a swapfile you can also specify a resume offset using
-resume_offset=<number> on the kernel command line or specify it
-in /sys/power/resume_offset.
-
-After preparing then you suspend by
-
-echo shutdown > /sys/power/disk; echo disk > /sys/power/state
-
-. If you feel ACPI works pretty well on your system, you might try
-
-echo platform > /sys/power/disk; echo disk > /sys/power/state
-
-. If you would like to write hibernation image to swap and then suspend
-to RAM (provided your platform supports it), you can try
-
-echo suspend > /sys/power/disk; echo disk > /sys/power/state
-
-. If you have SATA disks, you'll need recent kernels with SATA suspend
-support. For suspend and resume to work, make sure your disk drivers
-are built into kernel -- not modules. [There's way to make
-suspend/resume with modular disk drivers, see FAQ, but you probably
-should not do that.]
-
-If you want to limit the suspend image size to N bytes, do
-
-echo N > /sys/power/image_size
-
-before suspend (it is limited to around 2/5 of available RAM by default).
-
-. The resume process checks for the presence of the resume device,
-if found, it then checks the contents for the hibernation image signature.
-If both are found, it resumes the hibernation image.
-
-. The resume process may be triggered in two ways:
-  1) During lateinit:  If resume=/dev/your_swap_partition is specified on
-     the kernel command line, lateinit runs the resume process.  If the
-     resume device has not been probed yet, the resume process fails and
-     bootup continues.
-  2) Manually from an initrd or initramfs:  May be run from
-     the init script by using the /sys/power/resume file.  It is vital
-     that this be done prior to remounting any filesystems (even as
-     read-only) otherwise data may be corrupted.
-
-Article about goals and implementation of Software Suspend for Linux
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Author: Gábor Kuti
-Last revised: 2003-10-20 by Pavel Machek
-
-Idea and goals to achieve
-
-Nowadays it is common in several laptops that they have a suspend button. It
-saves the state of the machine to a filesystem or to a partition and switches
-to standby mode. Later resuming the machine the saved state is loaded back to
-ram and the machine can continue its work. It has two real benefits. First we
-save ourselves the time machine goes down and later boots up, energy costs
-are real high when running from batteries. The other gain is that we don't have to
-interrupt our programs so processes that are calculating something for a long
-time shouldn't need to be written interruptible.
-
-swsusp saves the state of the machine into active swaps and then reboots or
-powerdowns.  You must explicitly specify the swap partition to resume from with
-``resume='' kernel option. If signature is found it loads and restores saved
-state. If the option ``noresume'' is specified as a boot parameter, it skips
-the resuming.  If the option ``hibernate=nocompress'' is specified as a boot
-parameter, it saves hibernation image without compression.
-
-In the meantime while the system is suspended you should not add/remove any
-of the hardware, write to the filesystems, etc.
-
-Sleep states summary
-====================
-
-There are three different interfaces you can use, /proc/acpi should
-work like this:
-
-In a really perfect world:
-echo 1 > /proc/acpi/sleep       # for standby
-echo 2 > /proc/acpi/sleep       # for suspend to ram
-echo 3 > /proc/acpi/sleep       # for suspend to ram, but with more power conservative
-echo 4 > /proc/acpi/sleep       # for suspend to disk
-echo 5 > /proc/acpi/sleep       # for shutdown unfriendly the system
-
-and perhaps
-echo 4b > /proc/acpi/sleep      # for suspend to disk via s4bios
-
-Frequently Asked Questions
-==========================
-
-Q: well, suspending a server is IMHO a really stupid thing,
-but... (Diego Zuccato):
-
-A: You bought new UPS for your server. How do you install it without
-bringing machine down? Suspend to disk, rearrange power cables,
-resume.
-
-You have your server on UPS. Power died, and UPS is indicating 30
-seconds to failure. What do you do? Suspend to disk.
-
-
-Q: Maybe I'm missing something, but why don't the regular I/O paths work?
-
-A: We do use the regular I/O paths. However we cannot restore the data
-to its original location as we load it. That would create an
-inconsistent kernel state which would certainly result in an oops.
-Instead, we load the image into unused memory and then atomically copy
-it back to it original location. This implies, of course, a maximum
-image size of half the amount of memory.
-
-There are two solutions to this:
-
-* require half of memory to be free during suspend. That way you can
-read "new" data onto free spots, then cli and copy
-
-* assume we had special "polling" ide driver that only uses memory
-between 0-640KB. That way, I'd have to make sure that 0-640KB is free
-during suspending, but otherwise it would work...
-
-suspend2 shares this fundamental limitation, but does not include user
-data and disk caches into "used memory" by saving them in
-advance. That means that the limitation goes away in practice.
-
-Q: Does linux support ACPI S4?
-
-A: Yes. That's what echo platform > /sys/power/disk does.
-
-Q: What is 'suspend2'?
-
-A: suspend2 is 'Software Suspend 2', a forked implementation of
-suspend-to-disk which is available as separate patches for 2.4 and 2.6
-kernels from swsusp.sourceforge.net. It includes support for SMP, 4GB
-highmem and preemption. It also has a extensible architecture that
-allows for arbitrary transformations on the image (compression,
-encryption) and arbitrary backends for writing the image (eg to swap
-or an NFS share[Work In Progress]). Questions regarding suspend2
-should be sent to the mailing list available through the suspend2
-website, and not to the Linux Kernel Mailing List. We are working
-toward merging suspend2 into the mainline kernel.
-
-Q: What is the freezing of tasks and why are we using it?
-
-A: The freezing of tasks is a mechanism by which user space processes and some
-kernel threads are controlled during hibernation or system-wide suspend (on some
-architectures).  See freezing-of-tasks.txt for details.
-
-Q: What is the difference between "platform" and "shutdown"?
-
-A:
-
-shutdown: save state in linux, then tell bios to powerdown
-
-platform: save state in linux, then tell bios to powerdown and blink
-          "suspended led"
-
-"platform" is actually right thing to do where supported, but
-"shutdown" is most reliable (except on ACPI systems).
-
-Q: I do not understand why you have such strong objections to idea of
-selective suspend.
-
-A: Do selective suspend during runtime power management, that's okay. But
-it's useless for suspend-to-disk. (And I do not see how you could use
-it for suspend-to-ram, I hope you do not want that).
-
-Lets see, so you suggest to
-
-* SUSPEND all but swap device and parents
-* Snapshot
-* Write image to disk
-* SUSPEND swap device and parents
-* Powerdown
-
-Oh no, that does not work, if swap device or its parents uses DMA,
-you've corrupted data. You'd have to do
-
-* SUSPEND all but swap device and parents
-* FREEZE swap device and parents
-* Snapshot
-* UNFREEZE swap device and parents
-* Write
-* SUSPEND swap device and parents
-
-Which means that you still need that FREEZE state, and you get more
-complicated code. (And I have not yet introduce details like system
-devices).
-
-Q: There don't seem to be any generally useful behavioral
-distinctions between SUSPEND and FREEZE.
-
-A: Doing SUSPEND when you are asked to do FREEZE is always correct,
-but it may be unnecessarily slow. If you want your driver to stay simple,
-slowness may not matter to you. It can always be fixed later.
-
-For devices like disk it does matter, you do not want to spindown for
-FREEZE.
-
-Q: After resuming, system is paging heavily, leading to very bad interactivity.
-
-A: Try running
-
-cat /proc/[0-9]*/maps | grep / | sed 's:.* /:/:' | sort -u | while read file
-do
-  test -f "$file" && cat "$file" > /dev/null
-done
-
-after resume. swapoff -a; swapon -a may also be useful.
-
-Q: What happens to devices during swsusp? They seem to be resumed
-during system suspend?
-
-A: That's correct. We need to resume them if we want to write image to
-disk. Whole sequence goes like
-
-      Suspend part
-      ~~~~~~~~~~~~
-      running system, user asks for suspend-to-disk
-
-      user processes are stopped
-
-      suspend(PMSG_FREEZE): devices are frozen so that they don't interfere
-      		      with state snapshot
-
-      state snapshot: copy of whole used memory is taken with interrupts disabled
-
-      resume(): devices are woken up so that we can write image to swap
-
-      write image to swap
-
-      suspend(PMSG_SUSPEND): suspend devices so that we can power off
-
-      turn the power off
-
-      Resume part
-      ~~~~~~~~~~~
-      (is actually pretty similar)
-
-      running system, user asks for suspend-to-disk
-
-      user processes are stopped (in common case there are none, but with resume-from-initrd, no one knows)
-
-      read image from disk
-
-      suspend(PMSG_FREEZE): devices are frozen so that they don't interfere
-      		      with image restoration
-
-      image restoration: rewrite memory with image
-
-      resume(): devices are woken up so that system can continue
-
-      thaw all user processes
-
-Q: What is this 'Encrypt suspend image' for?
-
-A: First of all: it is not a replacement for dm-crypt encrypted swap.
-It cannot protect your computer while it is suspended. Instead it does
-protect from leaking sensitive data after resume from suspend.
-
-Think of the following: you suspend while an application is running
-that keeps sensitive data in memory. The application itself prevents
-the data from being swapped out. Suspend, however, must write these
-data to swap to be able to resume later on. Without suspend encryption
-your sensitive data are then stored in plaintext on disk.  This means
-that after resume your sensitive data are accessible to all
-applications having direct access to the swap device which was used
-for suspend. If you don't need swap after resume these data can remain
-on disk virtually forever. Thus it can happen that your system gets
-broken in weeks later and sensitive data which you thought were
-encrypted and protected are retrieved and stolen from the swap device.
-To prevent this situation you should use 'Encrypt suspend image'.
-
-During suspend a temporary key is created and this key is used to
-encrypt the data written to disk. When, during resume, the data was
-read back into memory the temporary key is destroyed which simply
-means that all data written to disk during suspend are then
-inaccessible so they can't be stolen later on.  The only thing that
-you must then take care of is that you call 'mkswap' for the swap
-partition used for suspend as early as possible during regular
-boot. This asserts that any temporary key from an oopsed suspend or
-from a failed or aborted resume is erased from the swap device.
-
-As a rule of thumb use encrypted swap to protect your data while your
-system is shut down or suspended. Additionally use the encrypted
-suspend image to prevent sensitive data from being stolen after
-resume.
-
-Q: Can I suspend to a swap file?
-
-A: Generally, yes, you can.  However, it requires you to use the "resume=" and
-"resume_offset=" kernel command line parameters, so the resume from a swap file
-cannot be initiated from an initrd or initramfs image.  See
-swsusp-and-swap-files.txt for details.
-
-Q: Is there a maximum system RAM size that is supported by swsusp?
-
-A: It should work okay with highmem.
-
-Q: Does swsusp (to disk) use only one swap partition or can it use
-multiple swap partitions (aggregate them into one logical space)?
-
-A: Only one swap partition, sorry.
-
-Q: If my application(s) causes lots of memory & swap space to be used
-(over half of the total system RAM), is it correct that it is likely
-to be useless to try to suspend to disk while that app is running?
-
-A: No, it should work okay, as long as your app does not mlock()
-it. Just prepare big enough swap partition.
-
-Q: What information is useful for debugging suspend-to-disk problems?
-
-A: Well, last messages on the screen are always useful. If something
-is broken, it is usually some kernel driver, therefore trying with as
-little as possible modules loaded helps a lot. I also prefer people to
-suspend from console, preferably without X running. Booting with
-init=/bin/bash, then swapon and starting suspend sequence manually
-usually does the trick. Then it is good idea to try with latest
-vanilla kernel.
-
-Q: How can distributions ship a swsusp-supporting kernel with modular
-disk drivers (especially SATA)?
-
-A: Well, it can be done, load the drivers, then do echo into
-/sys/power/resume file from initrd. Be sure not to mount
-anything, not even read-only mount, or you are going to lose your
-data.
-
-Q: How do I make suspend more verbose?
-
-A: If you want to see any non-error kernel messages on the virtual
-terminal the kernel switches to during suspend, you have to set the
-kernel console loglevel to at least 4 (KERN_WARNING), for example by
-doing
-
-	# save the old loglevel
-	read LOGLEVEL DUMMY < /proc/sys/kernel/printk
-	# set the loglevel so we see the progress bar.
-	# if the level is higher than needed, we leave it alone.
-	if [ $LOGLEVEL -lt 5 ]; then
-	        echo 5 > /proc/sys/kernel/printk
-		fi
-
-        IMG_SZ=0
-        read IMG_SZ < /sys/power/image_size
-        echo -n disk > /sys/power/state
-        RET=$?
-        #
-        # the logic here is:
-        # if image_size > 0 (without kernel support, IMG_SZ will be zero),
-        # then try again with image_size set to zero.
-	if [ $RET -ne 0 -a $IMG_SZ -ne 0 ]; then # try again with minimal image size
-                echo 0 > /sys/power/image_size
-                echo -n disk > /sys/power/state
-                RET=$?
-        fi
-
-	# restore previous loglevel
-	echo $LOGLEVEL > /proc/sys/kernel/printk
-	exit $RET
-
-Q: Is this true that if I have a mounted filesystem on a USB device and
-I suspend to disk, I can lose data unless the filesystem has been mounted
-with "sync"?
-
-A: That's right ... if you disconnect that device, you may lose data.
-In fact, even with "-o sync" you can lose data if your programs have
-information in buffers they haven't written out to a disk you disconnect,
-or if you disconnect before the device finished saving data you wrote.
-
-Software suspend normally powers down USB controllers, which is equivalent
-to disconnecting all USB devices attached to your system.
-
-Your system might well support low-power modes for its USB controllers
-while the system is asleep, maintaining the connection, using true sleep
-modes like "suspend-to-RAM" or "standby".  (Don't write "disk" to the
-/sys/power/state file; write "standby" or "mem".)  We've not seen any
-hardware that can use these modes through software suspend, although in
-theory some systems might support "platform" modes that won't break the
-USB connections.
-
-Remember that it's always a bad idea to unplug a disk drive containing a
-mounted filesystem.  That's true even when your system is asleep!  The
-safest thing is to unmount all filesystems on removable media (such USB,
-Firewire, CompactFlash, MMC, external SATA, or even IDE hotplug bays)
-before suspending; then remount them after resuming.
-
-There is a work-around for this problem.  For more information, see
-Documentation/driver-api/usb/persist.rst.
-
-Q: Can I suspend-to-disk using a swap partition under LVM?
-
-A: Yes and No.  You can suspend successfully, but the kernel will not be able
-to resume on its own.  You need an initramfs that can recognize the resume
-situation, activate the logical volume containing the swap volume (but not
-touch any filesystems!), and eventually call
-
-echo -n "$major:$minor" > /sys/power/resume
-
-where $major and $minor are the respective major and minor device numbers of
-the swap volume.
-
-uswsusp works with LVM, too.  See http://suspend.sourceforge.net/
-
-Q: I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were
-compiled with the similar configuration files. Anyway I found that
-suspend to disk (and resume) is much slower on 2.6.16 compared to
-2.6.15. Any idea for why that might happen or how can I speed it up?
-
-A: This is because the size of the suspend image is now greater than
-for 2.6.15 (by saving more data we can get more responsive system
-after resume).
-
-There's the /sys/power/image_size knob that controls the size of the
-image.  If you set it to 0 (eg. by echo 0 > /sys/power/image_size as
-root), the 2.6.15 behavior should be restored.  If it is still too
-slow, take a look at suspend.sf.net -- userland suspend is faster and
-supports LZF compression to speed it up further.
diff --git a/Documentation/power/tricks.txt b/Documentation/power/tricks.rst
similarity index 93%
rename from Documentation/power/tricks.txt
rename to Documentation/power/tricks.rst
index a1b8f7249f4c..ca787f142c3f 100644
--- a/Documentation/power/tricks.txt
+++ b/Documentation/power/tricks.rst
@@ -1,5 +1,7 @@
-	swsusp/S3 tricks
-	~~~~~~~~~~~~~~~~
+================
+swsusp/S3 tricks
+================
+
 Pavel Machek <pavel@ucw.cz>
 
 If you want to trick swsusp/S3 into working, you might want to try:
diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.rst
similarity index 85%
rename from Documentation/power/userland-swsusp.txt
rename to Documentation/power/userland-swsusp.rst
index bbfcd1bbedc5..a0fa51bb1a4d 100644
--- a/Documentation/power/userland-swsusp.txt
+++ b/Documentation/power/userland-swsusp.rst
@@ -1,4 +1,7 @@
+=====================================================
 Documentation for userland software suspend interface
+=====================================================
+
 	(C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
 
 First, the warnings at the beginning of swsusp.txt still apply.
@@ -30,13 +33,16 @@ called.
 
 The ioctl() commands recognized by the device are:
 
-SNAPSHOT_FREEZE - freeze user space processes (the current process is
+SNAPSHOT_FREEZE
+	freeze user space processes (the current process is
 	not frozen); this is required for SNAPSHOT_CREATE_IMAGE
 	and SNAPSHOT_ATOMIC_RESTORE to succeed
 
-SNAPSHOT_UNFREEZE - thaw user space processes frozen by SNAPSHOT_FREEZE
+SNAPSHOT_UNFREEZE
+	thaw user space processes frozen by SNAPSHOT_FREEZE
 
-SNAPSHOT_CREATE_IMAGE - create a snapshot of the system memory; the
+SNAPSHOT_CREATE_IMAGE
+	create a snapshot of the system memory; the
 	last argument of ioctl() should be a pointer to an int variable,
 	the value of which will indicate whether the call returned after
 	creating the snapshot (1) or after restoring the system memory state
@@ -45,48 +51,59 @@ SNAPSHOT_CREATE_IMAGE - create a snapshot of the system memory; the
 	has been created the read() operation can be used to transfer
 	it out of the kernel
 
-SNAPSHOT_ATOMIC_RESTORE - restore the system memory state from the
+SNAPSHOT_ATOMIC_RESTORE
+	restore the system memory state from the
 	uploaded snapshot image; before calling it you should transfer
 	the system memory snapshot back to the kernel using the write()
 	operation; this call will not succeed if the snapshot
 	image is not available to the kernel
 
-SNAPSHOT_FREE - free memory allocated for the snapshot image
+SNAPSHOT_FREE
+	free memory allocated for the snapshot image
 
-SNAPSHOT_PREF_IMAGE_SIZE - set the preferred maximum size of the image
+SNAPSHOT_PREF_IMAGE_SIZE
+	set the preferred maximum size of the image
 	(the kernel will do its best to ensure the image size will not exceed
 	this number, but if it turns out to be impossible, the kernel will
 	create the smallest image possible)
 
-SNAPSHOT_GET_IMAGE_SIZE - return the actual size of the hibernation image
+SNAPSHOT_GET_IMAGE_SIZE
+	return the actual size of the hibernation image
 
-SNAPSHOT_AVAIL_SWAP_SIZE - return the amount of available swap in bytes (the
+SNAPSHOT_AVAIL_SWAP_SIZE
+	return the amount of available swap in bytes (the
 	last argument should be a pointer to an unsigned int variable that will
 	contain the result if the call is successful).
 
-SNAPSHOT_ALLOC_SWAP_PAGE - allocate a swap page from the resume partition
+SNAPSHOT_ALLOC_SWAP_PAGE
+	allocate a swap page from the resume partition
 	(the last argument should be a pointer to a loff_t variable that
 	will contain the swap page offset if the call is successful)
 
-SNAPSHOT_FREE_SWAP_PAGES - free all swap pages allocated by
+SNAPSHOT_FREE_SWAP_PAGES
+	free all swap pages allocated by
 	SNAPSHOT_ALLOC_SWAP_PAGE
 
-SNAPSHOT_SET_SWAP_AREA - set the resume partition and the offset (in <PAGE_SIZE>
+SNAPSHOT_SET_SWAP_AREA
+	set the resume partition and the offset (in <PAGE_SIZE>
 	units) from the beginning of the partition at which the swap header is
 	located (the last ioctl() argument should point to a struct
 	resume_swap_area, as defined in kernel/power/suspend_ioctls.h,
 	containing the resume device specification and the offset); for swap
 	partitions the offset is always 0, but it is different from zero for
-	swap files (see Documentation/power/swsusp-and-swap-files.txt for
+	swap files (see Documentation/power/swsusp-and-swap-files.rst for
 	details).
 
-SNAPSHOT_PLATFORM_SUPPORT - enable/disable the hibernation platform support,
+SNAPSHOT_PLATFORM_SUPPORT
+	enable/disable the hibernation platform support,
 	depending on the argument value (enable, if the argument is nonzero)
 
-SNAPSHOT_POWER_OFF - make the kernel transition the system to the hibernation
+SNAPSHOT_POWER_OFF
+	make the kernel transition the system to the hibernation
 	state (eg. ACPI S4) using the platform (eg. ACPI) driver
 
-SNAPSHOT_S2RAM - suspend to RAM; using this call causes the kernel to
+SNAPSHOT_S2RAM
+	suspend to RAM; using this call causes the kernel to
 	immediately enter the suspend-to-RAM state, so this call must always
 	be preceded by the SNAPSHOT_FREEZE call and it is also necessary
 	to use the SNAPSHOT_UNFREEZE call after the system wakes up.  This call
@@ -98,10 +115,11 @@ SNAPSHOT_S2RAM - suspend to RAM; using this call causes the kernel to
 
 The device's read() operation can be used to transfer the snapshot image from
 the kernel.  It has the following limitations:
+
 - you cannot read() more than one virtual memory page at a time
 - read()s across page boundaries are impossible (ie. if you read() 1/2 of
-	a page in the previous call, you will only be able to read()
-	_at_ _most_ 1/2 of the page in the next call)
+  a page in the previous call, you will only be able to read()
+  **at most** 1/2 of the page in the next call)
 
 The device's write() operation is used for uploading the system memory snapshot
 into the kernel.  It has the same limitations as the read() operation.
@@ -143,8 +161,10 @@ preferably using mlockall(), before calling SNAPSHOT_FREEZE.
 The suspending utility MUST check the value stored by SNAPSHOT_CREATE_IMAGE
 in the memory location pointed to by the last argument of ioctl() and proceed
 in accordance with it:
+
 1. 	If the value is 1 (ie. the system memory snapshot has just been
 	created and the system is ready for saving it):
+
 	(a)	The suspending utility MUST NOT close the snapshot device
 		_unless_ the whole suspend procedure is to be cancelled, in
 		which case, if the snapshot image has already been saved, the
@@ -158,6 +178,7 @@ in accordance with it:
 		called.  However, it MAY mount a file system that was not
 		mounted at that time and perform some operations on it (eg.
 		use it for saving the image).
+
 2.	If the value is 0 (ie. the system state has just been restored from
 	the snapshot image), the suspending utility MUST close the snapshot
 	device.  Afterwards it will be treated as a regular userland process,
diff --git a/Documentation/power/video.txt b/Documentation/power/video.rst
similarity index 56%
rename from Documentation/power/video.txt
rename to Documentation/power/video.rst
index 3e6272bc4472..337a2ba9f32f 100644
--- a/Documentation/power/video.txt
+++ b/Documentation/power/video.rst
@@ -1,7 +1,8 @@
+===========================
+Video issues with S3 resume
+===========================
 
-		Video issues with S3 resume
-		~~~~~~~~~~~~~~~~~~~~~~~~~~~
-		  2003-2006, Pavel Machek
+2003-2006, Pavel Machek
 
 During S3 resume, hardware needs to be reinitialized. For most
 devices, this is easy, and kernel driver knows how to do
@@ -41,37 +42,37 @@ There are a few types of systems where video works after S3 resume:
 (1) systems where video state is preserved over S3.
 
 (2) systems where it is possible to call the video BIOS during S3
-  resume. Unfortunately, it is not correct to call the video BIOS at
-  that point, but it happens to work on some machines. Use
-  acpi_sleep=s3_bios.
+    resume. Unfortunately, it is not correct to call the video BIOS at
+    that point, but it happens to work on some machines. Use
+    acpi_sleep=s3_bios.
 
 (3) systems that initialize video card into vga text mode and where
-  the BIOS works well enough to be able to set video mode. Use
-  acpi_sleep=s3_mode on these.
+    the BIOS works well enough to be able to set video mode. Use
+    acpi_sleep=s3_mode on these.
 
 (4) on some systems s3_bios kicks video into text mode, and
-  acpi_sleep=s3_bios,s3_mode is needed.
+    acpi_sleep=s3_bios,s3_mode is needed.
 
 (5) radeon systems, where X can soft-boot your video card. You'll need
-  a new enough X, and a plain text console (no vesafb or radeonfb). See
-  http://www.doesi.gmxhome.de/linux/tm800s3/s3.html for more information.
-  Alternatively, you should use vbetool (6) instead.
+    a new enough X, and a plain text console (no vesafb or radeonfb). See
+    http://www.doesi.gmxhome.de/linux/tm800s3/s3.html for more information.
+    Alternatively, you should use vbetool (6) instead.
 
 (6) other radeon systems, where vbetool is enough to bring system back
-  to life. It needs text console to be working. Do vbetool vbestate
-  save > /tmp/delme; echo 3 > /proc/acpi/sleep; vbetool post; vbetool
-  vbestate restore < /tmp/delme; setfont <whatever>, and your video
-  should work.
+    to life. It needs text console to be working. Do vbetool vbestate
+    save > /tmp/delme; echo 3 > /proc/acpi/sleep; vbetool post; vbetool
+    vbestate restore < /tmp/delme; setfont <whatever>, and your video
+    should work.
 
 (7) on some systems, it is possible to boot most of kernel, and then
-  POSTing bios works. Ole Rohne has patch to do just that at
-  http://dev.gentoo.org/~marineam/patch-radeonfb-2.6.11-rc2-mm2.
+    POSTing bios works. Ole Rohne has patch to do just that at
+    http://dev.gentoo.org/~marineam/patch-radeonfb-2.6.11-rc2-mm2.
 
-(8) on some systems, you can use the video_post utility and or 
-  do echo 3 > /sys/power/state  && /usr/sbin/video_post - which will 
-  initialize the display in console mode. If you are in X, you can switch
-  to a virtual terminal and back to X using  CTRL+ALT+F1 - CTRL+ALT+F7 to get
-  the display working in graphical mode again.
+(8) on some systems, you can use the video_post utility and or
+    do echo 3 > /sys/power/state  && /usr/sbin/video_post - which will
+    initialize the display in console mode. If you are in X, you can switch
+    to a virtual terminal and back to X using  CTRL+ALT+F1 - CTRL+ALT+F7 to get
+    the display working in graphical mode again.
 
 Now, if you pass acpi_sleep=something, and it does not work with your
 bios, you'll get a hard crash during resume. Be careful. Also it is
@@ -87,99 +88,126 @@ chance of working.
 
 Table of known working notebooks:
 
+
+=============================== ===============================================
 Model                           hack (or "how to do it")
-------------------------------------------------------------------------------
+=============================== ===============================================
 Acer Aspire 1406LC		ole's late BIOS init (7), turn off DRI
 Acer TM 230			s3_bios (2)
 Acer TM 242FX			vbetool (6)
 Acer TM C110			video_post (8)
-Acer TM C300                    vga=normal (only suspend on console, not in X), vbetool (6) or video_post (8)
+Acer TM C300                    vga=normal (only suspend on console, not in X),
+				vbetool (6) or video_post (8)
 Acer TM 4052LCi		        s3_bios (2)
 Acer TM 636Lci			s3_bios,s3_mode (4)
-Acer TM 650 (Radeon M7)		vga=normal plus boot-radeon (5) gets text console back
-Acer TM 660			??? (*)
-Acer TM 800			vga=normal, X patches, see webpage (5) or vbetool (6)
-Acer TM 803			vga=normal, X patches, see webpage (5) or vbetool (6)
+Acer TM 650 (Radeon M7)		vga=normal plus boot-radeon (5) gets text
+				console back
+Acer TM 660			??? [#f1]_
+Acer TM 800			vga=normal, X patches, see webpage (5)
+				or vbetool (6)
+Acer TM 803			vga=normal, X patches, see webpage (5)
+				or vbetool (6)
 Acer TM 803LCi			vga=normal, vbetool (6)
 Arima W730a			vbetool needed (6)
-Asus L2400D                     s3_mode (3)(***) (S1 also works OK)
+Asus L2400D                     s3_mode (3) [#f2]_ (S1 also works OK)
 Asus L3350M (SiS 740)           (6)
 Asus L3800C (Radeon M7)		s3_bios (2) (S1 also works OK)
-Asus M6887Ne			vga=normal, s3_bios (2), use radeon driver instead of fglrx in x.org
+Asus M6887Ne			vga=normal, s3_bios (2), use radeon driver
+				instead of fglrx in x.org
 Athlon64 desktop prototype	s3_bios (2)
-Compal CL-50			??? (*)
+Compal CL-50			??? [#f1]_
 Compaq Armada E500 - P3-700     none (1) (S1 also works OK)
 Compaq Evo N620c		vga=normal, s3_bios (2)
 Dell 600m, ATI R250 Lf		none (1), but needs xorg-x11-6.8.1.902-1
 Dell D600, ATI RV250            vga=normal and X, or try vbestate (6)
-Dell D610			vga=normal and X (possibly vbestate (6) too, but not tested)
-Dell Inspiron 4000		??? (*)
-Dell Inspiron 500m		??? (*)
+Dell D610			vga=normal and X (possibly vbestate (6) too,
+				but not tested)
+Dell Inspiron 4000		??? [#f1]_
+Dell Inspiron 500m		??? [#f1]_
 Dell Inspiron 510m		???
 Dell Inspiron 5150		vbetool needed (6)
-Dell Inspiron 600m		??? (*)
-Dell Inspiron 8200		??? (*)
-Dell Inspiron 8500		??? (*)
-Dell Inspiron 8600		??? (*)
-eMachines athlon64 machines	vbetool needed (6) (someone please get me model #s)
-HP NC6000			s3_bios, may not use radeonfb (2); or vbetool (6)
-HP NX7000			??? (*)
-HP Pavilion ZD7000		vbetool post needed, need open-source nv driver for X
+Dell Inspiron 600m		??? [#f1]_
+Dell Inspiron 8200		??? [#f1]_
+Dell Inspiron 8500		??? [#f1]_
+Dell Inspiron 8600		??? [#f1]_
+eMachines athlon64 machines	vbetool needed (6) (someone please get
+				me model #s)
+HP NC6000			s3_bios, may not use radeonfb (2);
+				or vbetool (6)
+HP NX7000			??? [#f1]_
+HP Pavilion ZD7000		vbetool post needed, need open-source nv
+				driver for X
 HP Omnibook XE3	athlon version	none (1)
 HP Omnibook XE3GC		none (1), video is S3 Savage/IX-MV
 HP Omnibook XE3L-GF		vbetool (6)
 HP Omnibook 5150		none (1), (S1 also works OK)
-IBM TP T20, model 2647-44G	none (1), video is S3 Inc. 86C270-294 Savage/IX-MV, vesafb gets "interesting" but X work.
-IBM TP A31 / Type 2652-M5G      s3_mode (3) [works ok with BIOS 1.04 2002-08-23, but not at all with BIOS 1.11 2004-11-05 :-(]
+IBM TP T20, model 2647-44G	none (1), video is S3 Inc. 86C270-294
+				Savage/IX-MV, vesafb gets "interesting"
+				but X work.
+IBM TP A31 / Type 2652-M5G      s3_mode (3) [works ok with
+				BIOS 1.04 2002-08-23, but not at all with
+				BIOS 1.11 2004-11-05 :-(]
 IBM TP R32 / Type 2658-MMG      none (1)
-IBM TP R40 2722B3G		??? (*)
+IBM TP R40 2722B3G		??? [#f1]_
 IBM TP R50p / Type 1832-22U     s3_bios (2)
 IBM TP R51			none (1)
-IBM TP T30	236681A		??? (*)
+IBM TP T30	236681A		??? [#f1]_
 IBM TP T40 / Type 2373-MU4      none (1)
 IBM TP T40p			none (1)
 IBM TP R40p			s3_bios (2)
 IBM TP T41p			s3_bios (2), switch to X after resume
 IBM TP T42			s3_bios (2)
 IBM ThinkPad T42p (2373-GTG)	s3_bios (2)
-IBM TP X20			??? (*)
+IBM TP X20			??? [#f1]_
 IBM TP X30			s3_bios, s3_mode (4)
-IBM TP X31 / Type 2672-XXH      none (1), use radeontool (http://fdd.com/software/radeon/) to turn off backlight.
-IBM TP X32			none (1), but backlight is on and video is trashed after long suspend. s3_bios,s3_mode (4) works too. Perhaps that gets better results?
+IBM TP X31 / Type 2672-XXH      none (1), use radeontool
+				(http://fdd.com/software/radeon/) to
+				turn off backlight.
+IBM TP X32			none (1), but backlight is on and video is
+				trashed after long suspend. s3_bios,
+				s3_mode (4) works too. Perhaps that gets
+				better results?
 IBM Thinkpad X40 Type 2371-7JG  s3_bios,s3_mode (4)
-IBM TP 600e			none(1), but a switch to console and back to X is needed
-Medion MD4220			??? (*)
+IBM TP 600e			none(1), but a switch to console and
+				back to X is needed
+Medion MD4220			??? [#f1]_
 Samsung P35			vbetool needed (6)
 Sharp PC-AR10 (ATI rage)	none (1), backlight does not switch off
 Sony Vaio PCG-C1VRX/K		s3_bios (2)
-Sony Vaio PCG-F403		??? (*)
+Sony Vaio PCG-F403		??? [#f1]_
 Sony Vaio PCG-GRT995MP		none (1), works with 'nv' X driver
-Sony Vaio PCG-GR7/K		none (1), but needs radeonfb, use radeontool (http://fdd.com/software/radeon/) to turn off backlight.
-Sony Vaio PCG-N505SN		??? (*)
+Sony Vaio PCG-GR7/K		none (1), but needs radeonfb, use
+				radeontool (http://fdd.com/software/radeon/)
+				to turn off backlight.
+Sony Vaio PCG-N505SN		??? [#f1]_
 Sony Vaio vgn-s260		X or boot-radeon can init it (5)
-Sony Vaio vgn-S580BH		vga=normal, but suspend from X. Console will be blank unless you return to X.
+Sony Vaio vgn-S580BH		vga=normal, but suspend from X. Console will
+				be blank unless you return to X.
 Sony Vaio vgn-FS115B		s3_bios (2),s3_mode (4)
 Toshiba Libretto L5		none (1)
 Toshiba Libretto 100CT/110CT    vbetool (6)
 Toshiba Portege 3020CT		s3_mode (3)
 Toshiba Satellite 4030CDT	s3_mode (3) (S1 also works OK)
 Toshiba Satellite 4080XCDT      s3_mode (3) (S1 also works OK)
-Toshiba Satellite 4090XCDT      ??? (*)
-Toshiba Satellite P10-554       s3_bios,s3_mode (4)(****)
+Toshiba Satellite 4090XCDT      ??? [#f1]_
+Toshiba Satellite P10-554       s3_bios,s3_mode (4)[#f3]_
 Toshiba M30                     (2) xor X with nvidia driver using internal AGP
-Uniwill 244IIO			??? (*)
+Uniwill 244IIO			??? [#f1]_
+=============================== ===============================================
 
 Known working desktop systems
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
+=================== ============================= ========================
 Mainboard	    Graphics card                 hack (or "how to do it")
-------------------------------------------------------------------------------
+=================== ============================= ========================
 Asus A7V8X	    nVidia RIVA TNT2 model 64	  s3_bios,s3_mode (4)
+=================== ============================= ========================
 
 
-(*) from https://wiki.ubuntu.com/HoaryPMResults, not sure
-    which options to use. If you know, please tell me.
+.. [#f1] from https://wiki.ubuntu.com/HoaryPMResults, not sure
+         which options to use. If you know, please tell me.
 
-(***) To be tested with a newer kernel.
+.. [#f2] To be tested with a newer kernel.
 
-(****) Not with SMP kernel, UP only.
+.. [#f3] Not with SMP kernel, UP only.
diff --git a/Documentation/process/submitting-drivers.rst b/Documentation/process/submitting-drivers.rst
index 58bc047e7b95..1acaa14903d6 100644
--- a/Documentation/process/submitting-drivers.rst
+++ b/Documentation/process/submitting-drivers.rst
@@ -117,7 +117,7 @@ PM support:
 		implemented") error.  You should also try to make sure that your
 		driver uses as little power as possible when it's not doing
 		anything.  For the driver testing instructions see
-		Documentation/power/drivers-testing.txt and for a relatively
+		Documentation/power/drivers-testing.rst and for a relatively
 		complete overview of the power management issues related to
 		drivers see :ref:`Documentation/driver-api/pm/devices.rst <driverapi_pm_devices>`.
 
diff --git a/Documentation/scheduler/sched-energy.txt b/Documentation/scheduler/sched-energy.txt
index 197d81f4b836..d97207b9accb 100644
--- a/Documentation/scheduler/sched-energy.txt
+++ b/Documentation/scheduler/sched-energy.txt
@@ -22,7 +22,7 @@ the highest.
 
 The actual EM used by EAS is _not_ maintained by the scheduler, but by a
 dedicated framework. For details about this framework and what it provides,
-please refer to its documentation (see Documentation/power/energy-model.txt).
+please refer to its documentation (see Documentation/power/energy-model.rst).
 
 
 2. Background and Terminology
@@ -81,7 +81,7 @@ through the arch_scale_cpu_capacity() callback.
 
 The rest of platform knowledge used by EAS is directly read from the Energy
 Model (EM) framework. The EM of a platform is composed of a power cost table
-per 'performance domain' in the system (see Documentation/power/energy-model.txt
+per 'performance domain' in the system (see Documentation/power/energy-model.rst
 for futher details about performance domains).
 
 The scheduler manages references to the EM objects in the topology code when the
@@ -352,7 +352,7 @@ could be amended in the future if proven otherwise.
 EAS uses the EM of a platform to estimate the impact of scheduling decisions on
 energy. So, your platform must provide power cost tables to the EM framework in
 order to make EAS start. To do so, please refer to documentation of the
-independent EM framework in Documentation/power/energy-model.txt.
+independent EM framework in Documentation/power/energy-model.rst.
 
 Please also note that the scheduling domains need to be re-built after the
 EM has been registered in order to start EAS.
diff --git a/Documentation/trace/coresight-cpu-debug.txt b/Documentation/trace/coresight-cpu-debug.txt
index f07e38094b40..1a660a39e3c0 100644
--- a/Documentation/trace/coresight-cpu-debug.txt
+++ b/Documentation/trace/coresight-cpu-debug.txt
@@ -151,7 +151,7 @@ At the runtime you can disable idle states with below methods:
 
 It is possible to disable CPU idle states by way of the PM QoS
 subsystem, more specifically by using the "/dev/cpu_dma_latency"
-interface (see Documentation/power/pm_qos_interface.txt for more
+interface (see Documentation/power/pm_qos_interface.rst for more
 details).  As specified in the PM QoS documentation the requested
 parameter will stay in effect until the file descriptor is released.
 For example:
diff --git a/Documentation/translations/zh_CN/process/submitting-drivers.rst b/Documentation/translations/zh_CN/process/submitting-drivers.rst
index 72c6cd935821..f1c3906c69a8 100644
--- a/Documentation/translations/zh_CN/process/submitting-drivers.rst
+++ b/Documentation/translations/zh_CN/process/submitting-drivers.rst
@@ -97,7 +97,7 @@ Linux 2.6:
 		函数定义成返回 -ENOSYS(功能未实现)错误。你还应该尝试确
 		保你的驱动在什么都不干的情况下将耗电降到最低。要获得驱动
 		程序测试的指导,请参阅
-		Documentation/power/drivers-testing.txt。有关驱动程序电
+		Documentation/power/drivers-testing.rst。有关驱动程序电
 		源管理问题相对全面的概述,请参阅
 		Documentation/driver-api/pm/devices.rst。
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 3dd988519a11..518b73924d7e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6393,7 +6393,7 @@ M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
 M:	Pavel Machek <pavel@ucw.cz>
 L:	linux-pm@vger.kernel.org
 S:	Supported
-F:	Documentation/power/freezing-of-tasks.txt
+F:	Documentation/power/freezing-of-tasks.rst
 F:	include/linux/freezer.h
 F:	kernel/freezer.c
 
@@ -11675,7 +11675,7 @@ S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git
 F:	drivers/opp/
 F:	include/linux/pm_opp.h
-F:	Documentation/power/opp.txt
+F:	Documentation/power/opp.rst
 F:	Documentation/devicetree/bindings/opp/
 
 OPL4 DRIVER
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index bd8dea466b04..bf8cb068acf8 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2448,7 +2448,7 @@ menuconfig APM
 	  machines with more than one CPU.
 
 	  In order to use APM, you will need supporting software. For location
-	  and more information, read <file:Documentation/power/apm-acpi.txt>
+	  and more information, read <file:Documentation/power/apm-acpi.rst>
 	  and the Battery Powered Linux mini-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 066fd2a12851..10d040e2e807 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1175,7 +1175,7 @@ struct skl_wm_params {
  * to be disabled. This shouldn't happen and we'll print some error messages in
  * case it happens.
  *
- * For more, read the Documentation/power/runtime_pm.txt.
+ * For more, read the Documentation/power/runtime_pm.rst.
  */
 struct i915_runtime_pm {
 	atomic_t wakeref_count;
diff --git a/drivers/opp/Kconfig b/drivers/opp/Kconfig
index a7fbb93f302c..1f64a3d46c8a 100644
--- a/drivers/opp/Kconfig
+++ b/drivers/opp/Kconfig
@@ -10,4 +10,4 @@ config PM_OPP
 	  OPP layer organizes the data internally using device pointers
 	  representing individual voltage domains and provides SOC
 	  implementations a ready to use framework to manage OPPs.
-	  For more information, read <file:Documentation/power/opp.txt>
+	  For more information, read <file:Documentation/power/opp.rst>
diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c
index 874495c6face..1ae561180051 100644
--- a/drivers/power/supply/power_supply_core.c
+++ b/drivers/power/supply/power_supply_core.c
@@ -607,7 +607,7 @@ int power_supply_get_battery_info(struct power_supply *psy,
 
 	/* The property and field names below must correspond to elements
 	 * in enum power_supply_property. For reasoning, see
-	 * Documentation/power/power_supply_class.txt.
+	 * Documentation/power/power_supply_class.rst.
 	 */
 
 	of_property_read_u32(battery_np, "energy-full-design-microwatt-hours",
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index c7eef32e7739..5b8328a99b2a 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -52,7 +52,7 @@
  *                irq line disabled until the threaded handler has been run.
  * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend.  Does not guarantee
  *                   that this interrupt will wake the system from a suspended
- *                   state.  See Documentation/power/suspend-and-interrupts.txt
+ *                   state.  See Documentation/power/suspend-and-interrupts.rst
  * IRQF_FORCE_RESUME - Force enable it on resume even if IRQF_NO_SUSPEND is set
  * IRQF_NO_THREAD - Interrupt cannot be threaded
  * IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 66c19a65a514..c14ad8bc1a41 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -284,7 +284,7 @@ typedef struct pm_message {
  * actions to be performed by a device driver's callbacks generally depend on
  * the platform and subsystem the device belongs to.
  *
- * Refer to Documentation/power/runtime_pm.txt for more information about the
+ * Refer to Documentation/power/runtime_pm.rst for more information about the
  * role of the @runtime_suspend(), @runtime_resume() and @runtime_idle()
  * callbacks in device runtime power management.
  */
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index f8fe57d1022e..45b502a1748e 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -65,7 +65,7 @@ config HIBERNATION
 	  need to run mkswap against the swap partition used for the suspend.
 
 	  It also works with swap files to a limited extent (for details see
-	  <file:Documentation/power/swsusp-and-swap-files.txt>).
+	  <file:Documentation/power/swsusp-and-swap-files.rst>).
 
 	  Right now you may boot without resuming and resume later but in the
 	  meantime you cannot use the swap partition(s)/file(s) involved in
@@ -74,7 +74,7 @@ config HIBERNATION
 	  MOUNT any journaled filesystems mounted before the suspend or they
 	  will get corrupted in a nasty way.
 
-	  For more information take a look at <file:Documentation/power/swsusp.txt>.
+	  For more information take a look at <file:Documentation/power/swsusp.rst>.
 
 config ARCH_SAVE_PAGE_KEYS
 	bool
@@ -246,7 +246,7 @@ config APM_EMULATION
 	  notification of APM "events" (e.g. battery status change).
 
 	  In order to use APM, you will need supporting software. For location
-	  and more information, read <file:Documentation/power/apm-acpi.txt>
+	  and more information, read <file:Documentation/power/apm-acpi.rst>
 	  and the Battery Powered Linux mini-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index 41722046b937..0cd26289bfbc 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -165,7 +165,7 @@ config CFG80211_DEFAULT_PS
 
 	  If this causes your applications to misbehave you should fix your
 	  applications instead -- they need to register their network
-	  latency requirement, see Documentation/power/pm_qos_interface.txt.
+	  latency requirement, see Documentation/power/pm_qos_interface.rst.
 
 config CFG80211_DEBUGFS
 	bool "cfg80211 DebugFS entries"
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 26/79] docs: powerpc: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (23 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 25/79] docs: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-24  1:15     ` Andrew Donnellan
  2019-04-22 13:27   ` [PATCH v2 27/79] docs: pps.txt: convert to ReST and rename to pps.rst Mauro Carvalho Chehab
                     ` (52 subsequent siblings)
  77 siblings, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Bjorn Helgaas, Benjamin Herrenschmidt,
	Paul Mackerras, Michael Ellerman, Frederic Barrat,
	Andrew Donnellan, Manoj N. Kumar, Matthew R. Ochs, Uma Krishnan,
	Russell Currey, Sam Bobroff, Oliver O'Halloran, Qiang Zhao,
	Li Yang, Greg Kroah-Hartman, Jiri Slaby, linux-pci, linuxppc-dev,
	linux-scsi, linux-arm-kernel

Convert docs to ReST and add them to the arch-specific
book.

The conversion here was trivial, as almost every file there
was already using an elegant format close to ReST standard.

The changes were mostly to mark literal blocks and add a few
missing section title identifiers.

One note with regards to "--": on Sphinx, this can't be used
to identify a list, as it will format it badly. This can be
used, however, to identify a long hyphen - and "---" is an
even longer one.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/PCI/pci-error-recovery.txt      |   2 +-
 .../{bootwrapper.txt => bootwrapper.rst}      |  28 +++-
 .../{cpu_families.txt => cpu_families.rst}    |  23 +--
 .../{cpu_features.txt => cpu_features.rst}    |   6 +-
 Documentation/powerpc/{cxl.txt => cxl.rst}    |  46 ++++--
 .../powerpc/{cxlflash.txt => cxlflash.rst}    |  10 +-
 .../{DAWR-POWER9.txt => dawr-power9.rst}      |  10 +-
 Documentation/powerpc/{dscr.txt => dscr.rst}  |  18 +-
 ...ecovery.txt => eeh-pci-error-recovery.rst} | 108 ++++++------
 ...ed-dump.txt => firmware-assisted-dump.rst} | 117 +++++++------
 Documentation/powerpc/{hvcs.txt => hvcs.rst}  | 108 ++++++------
 Documentation/powerpc/index.rst               |  34 ++++
 Documentation/powerpc/isa-versions.rst        |  13 +-
 .../powerpc/{mpc52xx.txt => mpc52xx.rst}      |  12 +-
 ...nv.txt => pci_iov_resource_on_powernv.rst} |  15 +-
 .../powerpc/{pmu-ebb.txt => pmu-ebb.rst}      |   1 +
 Documentation/powerpc/ptrace.rst              | 156 ++++++++++++++++++
 Documentation/powerpc/ptrace.txt              | 151 -----------------
 .../{qe_firmware.txt => qe_firmware.rst}      |  37 +++--
 .../{syscall64-abi.txt => syscall64-abi.rst}  |  29 ++--
 ...al_memory.txt => transactional_memory.rst} |  45 ++---
 MAINTAINERS                                   |   6 +-
 arch/powerpc/kernel/exceptions-64s.S          |   2 +-
 drivers/soc/fsl/qe/qe.c                       |   2 +-
 drivers/tty/hvc/hvcs.c                        |   2 +-
 include/soc/fsl/qe/qe.h                       |   2 +-
 26 files changed, 559 insertions(+), 424 deletions(-)
 rename Documentation/powerpc/{bootwrapper.txt => bootwrapper.rst} (93%)
 rename Documentation/powerpc/{cpu_families.txt => cpu_families.rst} (95%)
 rename Documentation/powerpc/{cpu_features.txt => cpu_features.rst} (97%)
 rename Documentation/powerpc/{cxl.txt => cxl.rst} (95%)
 rename Documentation/powerpc/{cxlflash.txt => cxlflash.rst} (98%)
 rename Documentation/powerpc/{DAWR-POWER9.txt => dawr-power9.rst} (95%)
 rename Documentation/powerpc/{dscr.txt => dscr.rst} (91%)
 rename Documentation/powerpc/{eeh-pci-error-recovery.txt => eeh-pci-error-recovery.rst} (82%)
 rename Documentation/powerpc/{firmware-assisted-dump.txt => firmware-assisted-dump.rst} (80%)
 rename Documentation/powerpc/{hvcs.txt => hvcs.rst} (91%)
 create mode 100644 Documentation/powerpc/index.rst
 rename Documentation/powerpc/{mpc52xx.txt => mpc52xx.rst} (91%)
 rename Documentation/powerpc/{pci_iov_resource_on_powernv.txt => pci_iov_resource_on_powernv.rst} (97%)
 rename Documentation/powerpc/{pmu-ebb.txt => pmu-ebb.rst} (99%)
 create mode 100644 Documentation/powerpc/ptrace.rst
 delete mode 100644 Documentation/powerpc/ptrace.txt
 rename Documentation/powerpc/{qe_firmware.txt => qe_firmware.rst} (95%)
 rename Documentation/powerpc/{syscall64-abi.txt => syscall64-abi.rst} (82%)
 rename Documentation/powerpc/{transactional_memory.txt => transactional_memory.rst} (93%)

diff --git a/Documentation/PCI/pci-error-recovery.txt b/Documentation/PCI/pci-error-recovery.txt
index 0b6bb3ef449e..1ba6a89cf92f 100644
--- a/Documentation/PCI/pci-error-recovery.txt
+++ b/Documentation/PCI/pci-error-recovery.txt
@@ -389,7 +389,7 @@ platforms aren't supposed to share interrupts between many devices
 anyway :)
 
 >>> Implementation details for the powerpc platform are discussed in
->>> the file Documentation/powerpc/eeh-pci-error-recovery.txt
+>>> the file Documentation/powerpc/eeh-pci-error-recovery.rst
 
 >>> As of this writing, there is a growing list of device drivers with
 >>> patches implementing error recovery. Not all of these patches are in
diff --git a/Documentation/powerpc/bootwrapper.txt b/Documentation/powerpc/bootwrapper.rst
similarity index 93%
rename from Documentation/powerpc/bootwrapper.txt
rename to Documentation/powerpc/bootwrapper.rst
index d60fced5e1cc..a6292afba573 100644
--- a/Documentation/powerpc/bootwrapper.txt
+++ b/Documentation/powerpc/bootwrapper.rst
@@ -1,5 +1,7 @@
+========================
 The PowerPC boot wrapper
-------------------------
+========================
+
 Copyright (C) Secret Lab Technologies Ltd.
 
 PowerPC image targets compresses and wraps the kernel image (vmlinux) with
@@ -21,6 +23,7 @@ it uses the wrapper script (arch/powerpc/boot/wrapper) to generate target
 image.  The details of the build system is discussed in the next section.
 Currently, the following image format targets exist:
 
+   ==================== ========================================================
    cuImage.%:		Backwards compatible uImage for older version of
 			U-Boot (for versions that don't understand the device
 			tree).  This image embeds a device tree blob inside
@@ -29,31 +32,36 @@ Currently, the following image format targets exist:
 			with boot wrapper code that extracts data from the old
 			bd_info structure and loads the data into the device
 			tree before jumping into the kernel.
-			  Because of the series of #ifdefs found in the
+
+			Because of the series of #ifdefs found in the
 			bd_info structure used in the old U-Boot interfaces,
 			cuImages are platform specific.  Each specific
 			U-Boot platform has a different platform init file
 			which populates the embedded device tree with data
 			from the platform specific bd_info file.  The platform
 			specific cuImage platform init code can be found in
-			arch/powerpc/boot/cuboot.*.c.  Selection of the correct
+			`arch/powerpc/boot/cuboot.*.c`. Selection of the correct
 			cuImage init code for a specific board can be found in
 			the wrapper structure.
+
    dtbImage.%:		Similar to zImage, except device tree blob is embedded
 			inside the image instead of provided by firmware.  The
 			output image file can be either an elf file or a flat
 			binary depending on the platform.
-			  dtbImages are used on systems which do not have an
+
+			dtbImages are used on systems which do not have an
 			interface for passing a device tree directly.
 			dtbImages are similar to simpleImages except that
 			dtbImages have platform specific code for extracting
 			data from the board firmware, but simpleImages do not
 			talk to the firmware at all.
-			  PlayStation 3 support uses dtbImage.  So do Embedded
+
+			PlayStation 3 support uses dtbImage.  So do Embedded
 			Planet boards using the PlanetCore firmware.  Board
 			specific initialization code is typically found in a
 			file named arch/powerpc/boot/<platform>.c; but this
 			can be overridden by the wrapper script.
+
    simpleImage.%:	Firmware independent compressed image that does not
 			depend on any particular firmware interface and embeds
 			a device tree blob.  This image is a flat binary that
@@ -61,14 +69,16 @@ Currently, the following image format targets exist:
 			Firmware cannot pass any configuration data to the
 			kernel with this image type and it depends entirely on
 			the embedded device tree for all information.
-			  The simpleImage is useful for booting systems with
+
+			The simpleImage is useful for booting systems with
 			an unknown firmware interface or for booting from
 			a debugger when no firmware is present (such as on
 			the Xilinx Virtex platform).  The only assumption that
 			simpleImage makes is that RAM is correctly initialized
 			and that the MMU is either off or has RAM mapped to
 			base address 0.
-			  simpleImage also supports inserting special platform
+
+			simpleImage also supports inserting special platform
 			specific initialization code to the start of the bootup
 			sequence.  The virtex405 platform uses this feature to
 			ensure that the cache is invalidated before caching
@@ -81,9 +91,11 @@ Currently, the following image format targets exist:
 			named (virtex405-<board>.dts).  Search the wrapper
 			script for 'virtex405' and see the file
 			arch/powerpc/boot/virtex405-head.S for details.
+
    treeImage.%;		Image format for used with OpenBIOS firmware found
 			on some ppc4xx hardware.  This image embeds a device
 			tree blob inside the image.
+
    uImage:		Native image format used by U-Boot.  The uImage target
 			does not add any boot code.  It just wraps a compressed
 			vmlinux in the uImage data structure.  This image
@@ -91,12 +103,14 @@ Currently, the following image format targets exist:
 			a device tree to the kernel at boot.  If using an older
 			version of U-Boot, then you need to use a cuImage
 			instead.
+
    zImage.%:		Image format which does not embed a device tree.
 			Used by OpenFirmware and other firmware interfaces
 			which are able to supply a device tree.  This image
 			expects firmware to provide the device tree at boot.
 			Typically, if you have general purpose PowerPC
 			hardware then you want this image format.
+   ==================== ========================================================
 
 Image types which embed a device tree blob (simpleImage, dtbImage, treeImage,
 and cuImage) all generate the device tree blob from a file in the
diff --git a/Documentation/powerpc/cpu_families.txt b/Documentation/powerpc/cpu_families.rst
similarity index 95%
rename from Documentation/powerpc/cpu_families.txt
rename to Documentation/powerpc/cpu_families.rst
index fc08e22feb1a..1e063c5440c3 100644
--- a/Documentation/powerpc/cpu_families.txt
+++ b/Documentation/powerpc/cpu_families.rst
@@ -1,3 +1,4 @@
+============
 CPU Families
 ============
 
@@ -8,8 +9,8 @@ and are supported by arch/powerpc.
 Book3S (aka sPAPR)
 ------------------
 
- - Hash MMU
- - Mix of 32 & 64 bit
+- Hash MMU
+- Mix of 32 & 64 bit::
 
    +--------------+                 +----------------+
    |  Old POWER   | --------------> | RS64 (threads) |
@@ -108,8 +109,8 @@ Book3S (aka sPAPR)
 IBM BookE
 ---------
 
- - Software loaded TLB.
- - All 32 bit
+- Software loaded TLB.
+- All 32 bit::
 
    +--------------+
    |     401      |
@@ -155,8 +156,8 @@ IBM BookE
 Motorola/Freescale 8xx
 ----------------------
 
- - Software loaded with hardware assist.
- - All 32 bit
+- Software loaded with hardware assist.
+- All 32 bit::
 
    +-------------+
    | MPC8xx Core |
@@ -166,9 +167,9 @@ Motorola/Freescale 8xx
 Freescale BookE
 ---------------
 
- - Software loaded TLB.
- - e6500 adds HW loaded indirect TLB entries.
- - Mix of 32 & 64 bit
+- Software loaded TLB.
+- e6500 adds HW loaded indirect TLB entries.
+- Mix of 32 & 64 bit::
 
    +--------------+
    |     e200     |
@@ -207,8 +208,8 @@ Freescale BookE
 IBM A2 core
 -----------
 
- - Book3E, software loaded TLB + HW loaded indirect TLB entries.
- - 64 bit
+- Book3E, software loaded TLB + HW loaded indirect TLB entries.
+- 64 bit::
 
    +--------------+     +----------------+
    |   A2 core    | --> |      WSP       |
diff --git a/Documentation/powerpc/cpu_features.txt b/Documentation/powerpc/cpu_features.rst
similarity index 97%
rename from Documentation/powerpc/cpu_features.txt
rename to Documentation/powerpc/cpu_features.rst
index ae09df8722c8..b7bcdd2f41bb 100644
--- a/Documentation/powerpc/cpu_features.txt
+++ b/Documentation/powerpc/cpu_features.rst
@@ -1,3 +1,7 @@
+============
+CPU Features
+============
+
 Hollis Blanchard <hollis@austin.ibm.com>
 5 Jun 2002
 
@@ -32,7 +36,7 @@ anyways).
 After detecting the processor type, the kernel patches out sections of code
 that shouldn't be used by writing nop's over it. Using cpufeatures requires
 just 2 macros (found in arch/powerpc/include/asm/cputable.h), as seen in head.S
-transfer_to_handler:
+transfer_to_handler::
 
 	#ifdef CONFIG_ALTIVEC
 	BEGIN_FTR_SECTION
diff --git a/Documentation/powerpc/cxl.txt b/Documentation/powerpc/cxl.rst
similarity index 95%
rename from Documentation/powerpc/cxl.txt
rename to Documentation/powerpc/cxl.rst
index c5e8d5098ed3..99e704afb09d 100644
--- a/Documentation/powerpc/cxl.txt
+++ b/Documentation/powerpc/cxl.rst
@@ -1,3 +1,4 @@
+====================================
 Coherent Accelerator Interface (CXL)
 ====================================
 
@@ -21,6 +22,8 @@ Introduction
 Hardware overview
 =================
 
+    ::
+
          POWER8/9             FPGA
        +----------+        +---------+
        |          |        |         |
@@ -59,14 +62,16 @@ Hardware overview
     the fault. The context to which this fault is serviced is based on
     who owns that acceleration function.
 
-    POWER8 <-----> PSL Version 8 is compliant to the CAIA Version 1.0.
-    POWER9 <-----> PSL Version 9 is compliant to the CAIA Version 2.0.
+    - POWER8 <------> PSL Version 8 is compliant to the CAIA Version 1.0.
+    - POWER9 <------> PSL Version 9 is compliant to the CAIA Version 2.0.
+
     This PSL Version 9 provides new features such as:
+
     * Interaction with the nest MMU on the P9 chip.
     * Native DMA support.
     * Supports sending ASB_Notify messages for host thread wakeup.
     * Supports Atomic operations.
-    * ....
+    * etc.
 
     Cards with a PSL9 won't work on a POWER8 system and cards with a
     PSL8 won't work on a POWER9 system.
@@ -147,7 +152,9 @@ User API
     master devices.
 
     A userspace library libcxl is available here:
+
 	https://github.com/ibm-capi/libcxl
+
     This provides a C interface to this kernel API.
 
 open
@@ -165,7 +172,8 @@ open
     When all available contexts are allocated the open call will fail
     and return -ENOSPC.
 
-    Note: IRQs need to be allocated for each context, which may limit
+    Note:
+	  IRQs need to be allocated for each context, which may limit
           the number of contexts that can be created, and therefore
           how many times the device can be opened. The POWER8 CAPP
           supports 2040 IRQs and 3 are used by the kernel, so 2037 are
@@ -186,7 +194,9 @@ ioctl
         updated as userspace allocates and frees memory. This ioctl
         returns once the AFU context is started.
 
-        Takes a pointer to a struct cxl_ioctl_start_work:
+        Takes a pointer to a struct cxl_ioctl_start_work
+
+            ::
 
                 struct cxl_ioctl_start_work {
                         __u64 flags;
@@ -269,7 +279,7 @@ read
     The buffer passed to read() must be at least 4K bytes.
 
     The result of the read will be a buffer of one or more events,
-    each event is of type struct cxl_event, of varying size.
+    each event is of type struct cxl_event, of varying size::
 
             struct cxl_event {
                     struct cxl_event_header header;
@@ -280,7 +290,9 @@ read
                     };
             };
 
-    The struct cxl_event_header is defined as:
+    The struct cxl_event_header is defined as
+
+        ::
 
             struct cxl_event_header {
                     __u16 type;
@@ -307,7 +319,9 @@ read
             For future extensions and padding.
 
     If the event type is CXL_EVENT_AFU_INTERRUPT then the event
-    structure is defined as:
+    structure is defined as
+
+        ::
 
             struct cxl_event_afu_interrupt {
                     __u16 flags;
@@ -326,7 +340,9 @@ read
             For future extensions and padding.
 
     If the event type is CXL_EVENT_DATA_STORAGE then the event
-    structure is defined as:
+    structure is defined as
+
+        ::
 
             struct cxl_event_data_storage {
                     __u16 flags;
@@ -356,7 +372,9 @@ read
             For future extensions
 
     If the event type is CXL_EVENT_AFU_ERROR then the event structure
-    is defined as:
+    is defined as
+
+        ::
 
             struct cxl_event_afu_error {
                     __u16 flags;
@@ -393,15 +411,15 @@ open
 ioctl
 -----
 
-CXL_IOCTL_DOWNLOAD_IMAGE:
-CXL_IOCTL_VALIDATE_IMAGE:
+CXL_IOCTL_DOWNLOAD_IMAGE / CXL_IOCTL_VALIDATE_IMAGE:
     Starts and controls flashing a new FPGA image. Partial
     reconfiguration is not supported (yet), so the image must contain
     a copy of the PSL and AFU(s). Since an image can be quite large,
     the caller may have to iterate, splitting the image in smaller
     chunks.
 
-    Takes a pointer to a struct cxl_adapter_image:
+    Takes a pointer to a struct cxl_adapter_image::
+
         struct cxl_adapter_image {
             __u64 flags;
             __u64 data;
@@ -442,7 +460,7 @@ Udev rules
     The following udev rules could be used to create a symlink to the
     most logical chardev to use in any programming mode (afuX.Yd for
     dedicated, afuX.Ys for afu directed), since the API is virtually
-    identical for each:
+    identical for each::
 
 	SUBSYSTEM=="cxl", ATTRS{mode}=="dedicated_process", SYMLINK="cxl/%b"
 	SUBSYSTEM=="cxl", ATTRS{mode}=="afu_directed", \
diff --git a/Documentation/powerpc/cxlflash.txt b/Documentation/powerpc/cxlflash.rst
similarity index 98%
rename from Documentation/powerpc/cxlflash.txt
rename to Documentation/powerpc/cxlflash.rst
index a64bdaa0a1cf..cea67931b3b9 100644
--- a/Documentation/powerpc/cxlflash.txt
+++ b/Documentation/powerpc/cxlflash.rst
@@ -1,3 +1,7 @@
+================================
+Coherent Accelerator (CXL) Flash
+================================
+
 Introduction
 ============
 
@@ -28,7 +32,7 @@ Introduction
     responsible for the initialization of the adapter, setting up the
     special path for user space access, and performing error recovery. It
     communicates directly the Flash Accelerator Functional Unit (AFU)
-    as described in Documentation/powerpc/cxl.txt.
+    as described in Documentation/powerpc/cxl.rst.
 
     The cxlflash driver supports two, mutually exclusive, modes of
     operation at the device (LUN) level:
@@ -58,7 +62,7 @@ Overview
 
     The CXL Flash Adapter Driver establishes a master context with the
     AFU. It uses memory mapped I/O (MMIO) for this control and setup. The
-    Adapter Problem Space Memory Map looks like this:
+    Adapter Problem Space Memory Map looks like this::
 
                      +-------------------------------+
                      |    512 * 64 KB User MMIO      |
@@ -375,7 +379,7 @@ CXL Flash Driver Host IOCTLs
     Each host adapter instance that is supported by the cxlflash driver
     has a special character device associated with it to enable a set of
     host management function. These character devices are hosted in a
-    class dedicated for cxlflash and can be accessed via /dev/cxlflash/*.
+    class dedicated for cxlflash and can be accessed via `/dev/cxlflash/*`.
 
     Applications can be written to perform various functions using the
     host ioctl APIs below.
diff --git a/Documentation/powerpc/DAWR-POWER9.txt b/Documentation/powerpc/dawr-power9.rst
similarity index 95%
rename from Documentation/powerpc/DAWR-POWER9.txt
rename to Documentation/powerpc/dawr-power9.rst
index 2feaa6619658..882e5af02b9c 100644
--- a/Documentation/powerpc/DAWR-POWER9.txt
+++ b/Documentation/powerpc/dawr-power9.rst
@@ -1,10 +1,11 @@
+=====================
 DAWR issues on POWER9
-============================
+=====================
 
 On POWER9 the DAWR can cause a checkstop if it points to cache
 inhibited (CI) memory. Currently Linux has no way to disinguish CI
 memory when configuring the DAWR, so (for now) the DAWR is disabled by
-this commit:
+this commit::
 
     commit 9654153158d3e0684a1bdb76dbababdb7111d5a0
     Author: Michael Neuling <mikey@neuling.org>
@@ -12,7 +13,7 @@ this commit:
     powerpc: Disable DAWR in the base POWER9 CPU features
 
 Technical Details:
-============================
+==================
 
 DAWR has 6 different ways of being set.
 1) ptrace
@@ -37,7 +38,7 @@ DAWR on the migration.
 For xmon, the 'bd' command will return an error on P9.
 
 Consequences for users
-============================
+======================
 
 For GDB watchpoints (ie 'watch' command) on POWER9 bare metal , GDB
 will accept the command. Unfortunately since there is no hardware
@@ -55,4 +56,3 @@ guest is migrated to a POWER9 host, the watchpoint will be lost on the
 POWER9. Loads and stores to the watchpoint locations will not be
 trapped in GDB. The watchpoint is remembered, so if the guest is
 migrated back to the POWER8 host, it will start working again.
-
diff --git a/Documentation/powerpc/dscr.txt b/Documentation/powerpc/dscr.rst
similarity index 91%
rename from Documentation/powerpc/dscr.txt
rename to Documentation/powerpc/dscr.rst
index ece300c64f76..2ab99006014c 100644
--- a/Documentation/powerpc/dscr.txt
+++ b/Documentation/powerpc/dscr.rst
@@ -1,5 +1,6 @@
-			DSCR (Data Stream Control Register)
-		================================================
+===================================
+DSCR (Data Stream Control Register)
+===================================
 
 DSCR register in powerpc allows user to have some control of prefetch of data
 stream in the processor. Please refer to the ISA documents or related manual
@@ -10,14 +11,17 @@ user interface.
 
 (A) Data Structures:
 
-	(1) thread_struct:
+	(1) thread_struct::
+
 		dscr		/* Thread DSCR value */
 		dscr_inherit	/* Thread has changed default DSCR */
 
-	(2) PACA:
+	(2) PACA::
+
 		dscr_default	/* per-CPU DSCR default value */
 
-	(3) sysfs.c:
+	(3) sysfs.c::
+
 		dscr_default	/* System DSCR default value */
 
 (B) Scheduler Changes:
@@ -35,8 +39,8 @@ user interface.
 
 (C) SYSFS Interface:
 
-	Global DSCR default:		/sys/devices/system/cpu/dscr_default
-	CPU specific DSCR default:	/sys/devices/system/cpu/cpuN/dscr
+	- Global DSCR default:		/sys/devices/system/cpu/dscr_default
+	- CPU specific DSCR default:	/sys/devices/system/cpu/cpuN/dscr
 
 	Changing the global DSCR default in the sysfs will change all the CPU
 	specific DSCR defaults immediately in their PACA structures. Again if
diff --git a/Documentation/powerpc/eeh-pci-error-recovery.txt b/Documentation/powerpc/eeh-pci-error-recovery.rst
similarity index 82%
rename from Documentation/powerpc/eeh-pci-error-recovery.txt
rename to Documentation/powerpc/eeh-pci-error-recovery.rst
index 678189280bb4..438a87ebc095 100644
--- a/Documentation/powerpc/eeh-pci-error-recovery.txt
+++ b/Documentation/powerpc/eeh-pci-error-recovery.rst
@@ -1,10 +1,10 @@
+==========================
+PCI Bus EEH Error Recovery
+==========================
 
+Linas Vepstas <linas@austin.ibm.com>
 
-                      PCI Bus EEH Error Recovery
-                      --------------------------
-                           Linas Vepstas
-                       <linas@austin.ibm.com>
-                          12 January 2005
+12 January 2005
 
 
 Overview:
@@ -143,17 +143,17 @@ seen in /proc/ppc64/eeh (subject to change).  Normally, almost
 all of these occur during boot, when the PCI bus is scanned, where
 a large number of 0xff reads are part of the bus scan procedure.
 
-If a frozen slot is detected, code in 
-arch/powerpc/platforms/pseries/eeh.c will print a stack trace to 
-syslog (/var/log/messages).  This stack trace has proven to be very 
-useful to device-driver authors for finding out at what point the EEH 
-error was detected, as the error itself usually occurs slightly 
+If a frozen slot is detected, code in
+arch/powerpc/platforms/pseries/eeh.c will print a stack trace to
+syslog (/var/log/messages).  This stack trace has proven to be very
+useful to device-driver authors for finding out at what point the EEH
+error was detected, as the error itself usually occurs slightly
 beforehand.
 
 Next, it uses the Linux kernel notifier chain/work queue mechanism to
 allow any interested parties to find out about the failure.  Device
 drivers, or other parts of the kernel, can use
-eeh_register_notifier(struct notifier_block *) to find out about EEH
+`eeh_register_notifier(struct notifier_block *)` to find out about EEH
 events.  The event will include a pointer to the pci device, the
 device node and some state info.  Receivers of the event can "do as
 they wish"; the default handler will be described further in this
@@ -162,10 +162,13 @@ section.
 To assist in the recovery of the device, eeh.c exports the
 following functions:
 
-rtas_set_slot_reset() -- assert the  PCI #RST line for 1/8th of a second
-rtas_configure_bridge() -- ask firmware to configure any PCI bridges
+rtas_set_slot_reset()
+   assert the  PCI #RST line for 1/8th of a second
+rtas_configure_bridge()
+   ask firmware to configure any PCI bridges
    located topologically under the pci slot.
-eeh_save_bars() and eeh_restore_bars(): save and restore the PCI
+eeh_save_bars() and eeh_restore_bars():
+   save and restore the PCI
    config-space info for a device and any devices under it.
 
 
@@ -191,7 +194,7 @@ events get delivered to user-space scripts.
 
 Following is an example sequence of events that cause a device driver
 close function to be called during the first phase of an EEH reset.
-The following sequence is an example of the pcnet32 device driver.
+The following sequence is an example of the pcnet32 device driver::
 
     rpa_php_unconfig_pci_adapter (struct slot *)  // in rpaphp_pci.c
     {
@@ -241,53 +244,54 @@ The following sequence is an example of the pcnet32 device driver.
      }}}}}}
 
 
-    in drivers/pci/pci_driver.c,
-    struct device_driver->remove() is just pci_device_remove()
-    which calls struct pci_driver->remove() which is pcnet32_remove_one()
-    which calls unregister_netdev()  (in net/core/dev.c)
-    which calls dev_close()  (in net/core/dev.c)
-    which calls dev->stop() which is pcnet32_close()
-    which then does the appropriate shutdown.
+in drivers/pci/pci_driver.c,
+struct device_driver->remove() is just pci_device_remove()
+which calls struct pci_driver->remove() which is pcnet32_remove_one()
+which calls unregister_netdev()  (in net/core/dev.c)
+which calls dev_close()  (in net/core/dev.c)
+which calls dev->stop() which is pcnet32_close()
+which then does the appropriate shutdown.
 
 ---
+
 Following is the analogous stack trace for events sent to user-space
-when the pci device is unconfigured.
+when the pci device is unconfigured::
 
-rpa_php_unconfig_pci_adapter() {             // in rpaphp_pci.c
-  calls
-  pci_remove_bus_device (struct pci_dev *) { // in /drivers/pci/remove.c
+  rpa_php_unconfig_pci_adapter() {             // in rpaphp_pci.c
     calls
-    pci_destroy_dev (struct pci_dev *) {
+    pci_remove_bus_device (struct pci_dev *) { // in /drivers/pci/remove.c
       calls
-      device_unregister (&dev->dev) {        // in /drivers/base/core.c
+      pci_destroy_dev (struct pci_dev *) {
         calls
-        device_del(struct device * dev) {    // in /drivers/base/core.c
+        device_unregister (&dev->dev) {        // in /drivers/base/core.c
           calls
-          kobject_del() {                    //in /libs/kobject.c
+          device_del(struct device * dev) {    // in /drivers/base/core.c
             calls
-            kobject_uevent() {               // in /libs/kobject.c
+            kobject_del() {                    //in /libs/kobject.c
               calls
-              kset_uevent() {                // in /lib/kobject.c
+              kobject_uevent() {               // in /libs/kobject.c
                 calls
-                kset->uevent_ops->uevent()   // which is really just
-                a call to
-                dev_uevent() {               // in /drivers/base/core.c
+                kset_uevent() {                // in /lib/kobject.c
                   calls
-                  dev->bus->uevent() which is really just a call to
-                  pci_uevent () {            // in drivers/pci/hotplug.c
-                    which prints device name, etc....
+                  kset->uevent_ops->uevent()   // which is really just
+                  a call to
+                  dev_uevent() {               // in /drivers/base/core.c
+                    calls
+                    dev->bus->uevent() which is really just a call to
+                    pci_uevent () {            // in drivers/pci/hotplug.c
+                      which prints device name, etc....
+                   }
                  }
-               }
-               then kobject_uevent() sends a netlink uevent to userspace
-               --> userspace uevent
-               (during early boot, nobody listens to netlink events and
-               kobject_uevent() executes uevent_helper[], which runs the
-               event process /sbin/hotplug)
+                 then kobject_uevent() sends a netlink uevent to userspace
+                 --> userspace uevent
+                 (during early boot, nobody listens to netlink events and
+                 kobject_uevent() executes uevent_helper[], which runs the
+                 event process /sbin/hotplug)
+             }
            }
-         }
-         kobject_del() then calls sysfs_remove_dir(), which would
-         trigger any user-space daemon that was watching /sysfs,
-         and notice the delete event.
+           kobject_del() then calls sysfs_remove_dir(), which would
+           trigger any user-space daemon that was watching /sysfs,
+           and notice the delete event.
 
 
 Pro's and Con's of the Current Design
@@ -299,12 +303,12 @@ individual device drivers, so that the current design throws a wide net.
 The biggest negative of the design is that it potentially disturbs
 network daemons and file systems that didn't need to be disturbed.
 
--- A minor complaint is that resetting the network card causes
+-  A minor complaint is that resetting the network card causes
    user-space back-to-back ifdown/ifup burps that potentially disturb
    network daemons, that didn't need to even know that the pci
    card was being rebooted.
 
--- A more serious concern is that the same reset, for SCSI devices,
+-  A more serious concern is that the same reset, for SCSI devices,
    causes havoc to mounted file systems.  Scripts cannot post-facto
    unmount a file system without flushing pending buffers, but this
    is impossible, because I/O has already been stopped.  Thus,
@@ -322,7 +326,7 @@ network daemons and file systems that didn't need to be disturbed.
    from the block layer.  It would be very natural to add an EEH
    reset into this chain of events.
 
--- If a SCSI error occurs for the root device, all is lost unless
+-  If a SCSI error occurs for the root device, all is lost unless
    the sysadmin had the foresight to run /bin, /sbin, /etc, /var
    and so on, out of ramdisk/tmpfs.
 
@@ -330,5 +334,3 @@ network daemons and file systems that didn't need to be disturbed.
 Conclusions
 -----------
 There's forward progress ...
-
-
diff --git a/Documentation/powerpc/firmware-assisted-dump.txt b/Documentation/powerpc/firmware-assisted-dump.rst
similarity index 80%
rename from Documentation/powerpc/firmware-assisted-dump.txt
rename to Documentation/powerpc/firmware-assisted-dump.rst
index 0c41d6d463f3..d7fa7c35dd12 100644
--- a/Documentation/powerpc/firmware-assisted-dump.txt
+++ b/Documentation/powerpc/firmware-assisted-dump.rst
@@ -1,7 +1,8 @@
+======================
+Firmware-Assisted Dump
+======================
 
-                   Firmware-Assisted Dump
-                   ------------------------
-                       July 2011
+July 2011
 
 The goal of firmware-assisted dump is to enable the dump of
 a crashed system, and to do so from a fully-reset system, and
@@ -27,11 +28,11 @@ in production use.
 Comparing with kdump or other strategies, firmware-assisted
 dump offers several strong, practical advantages:
 
--- Unlike kdump, the system has been reset, and loaded
+-  Unlike kdump, the system has been reset, and loaded
    with a fresh copy of the kernel.  In particular,
    PCI and I/O devices have been reinitialized and are
    in a clean, consistent state.
--- Once the dump is copied out, the memory that held the dump
+-  Once the dump is copied out, the memory that held the dump
    is immediately available to the running kernel. And therefore,
    unlike kdump, fadump doesn't need a 2nd reboot to get back
    the system to the production configuration.
@@ -40,17 +41,18 @@ The above can only be accomplished by coordination with,
 and assistance from the Power firmware. The procedure is
 as follows:
 
--- The first kernel registers the sections of memory with the
+-  The first kernel registers the sections of memory with the
    Power firmware for dump preservation during OS initialization.
    These registered sections of memory are reserved by the first
    kernel during early boot.
 
--- When a system crashes, the Power firmware will save
+-  When a system crashes, the Power firmware will save
    the low memory (boot memory of size larger of 5% of system RAM
    or 256MB) of RAM to the previous registered region. It will
    also save system registers, and hardware PTE's.
 
-   NOTE: The term 'boot memory' means size of the low memory chunk
+   NOTE:
+         The term 'boot memory' means size of the low memory chunk
          that is required for a kernel to boot successfully when
          booted with restricted memory. By default, the boot memory
          size will be the larger of 5% of system RAM or 256MB.
@@ -64,12 +66,12 @@ as follows:
          as fadump uses a predefined offset to reserve memory
          for boot memory dump preservation in case of a crash.
 
--- After the low memory (boot memory) area has been saved, the
+-  After the low memory (boot memory) area has been saved, the
    firmware will reset PCI and other hardware state.  It will
    *not* clear the RAM. It will then launch the bootloader, as
    normal.
 
--- The freshly booted kernel will notice that there is a new
+-  The freshly booted kernel will notice that there is a new
    node (ibm,dump-kernel) in the device tree, indicating that
    there is crash data available from a previous boot. During
    the early boot OS will reserve rest of the memory above
@@ -77,17 +79,18 @@ as follows:
    size. This will make sure that the second kernel will not
    touch any of the dump memory area.
 
--- User-space tools will read /proc/vmcore to obtain the contents
+-  User-space tools will read /proc/vmcore to obtain the contents
    of memory, which holds the previous crashed kernel dump in ELF
    format. The userspace tools may copy this info to disk, or
    network, nas, san, iscsi, etc. as desired.
 
--- Once the userspace tool is done saving dump, it will echo
+-  Once the userspace tool is done saving dump, it will echo
    '1' to /sys/kernel/fadump_release_mem to release the reserved
    memory back to general use, except the memory required for
    next firmware-assisted dump registration.
 
-   e.g.
+   e.g.::
+
      # echo 1 > /sys/kernel/fadump_release_mem
 
 Please note that the firmware-assisted dump feature
@@ -95,7 +98,7 @@ is only available on Power6 and above systems with recent
 firmware versions.
 
 Implementation details:
-----------------------
+-----------------------
 
 During boot, a check is made to see if firmware supports
 this feature on that particular machine. If it does, then
@@ -121,7 +124,7 @@ Allocator (CMA) for memory reservation if CMA is configured for kernel.
 With CMA reservation this memory will be available for applications to
 use it, while kernel is prevented from using it. With this fadump will
 still be able to capture all of the kernel memory and most of the user
-space memory except the user pages that were present in CMA region.
+space memory except the user pages that were present in CMA region::
 
   o Memory Reservation during first kernel
 
@@ -166,7 +169,7 @@ The tools to examine the dump will be same as the ones
 used for kdump.
 
 How to enable firmware-assisted dump (fadump):
--------------------------------------
+----------------------------------------------
 
 1. Set config option CONFIG_FA_DUMP=y and build kernel.
 2. Boot into linux kernel with 'fadump=on' kernel cmdline option.
@@ -177,19 +180,20 @@ How to enable firmware-assisted dump (fadump):
    to specify size of the memory to reserve for boot memory dump
    preservation.
 
-NOTE: 1. 'fadump_reserve_mem=' parameter has been deprecated. Instead
-         use 'crashkernel=' to specify size of the memory to reserve
-         for boot memory dump preservation.
-      2. If firmware-assisted dump fails to reserve memory then it
-         will fallback to existing kdump mechanism if 'crashkernel='
-         option is set at kernel cmdline.
-      3. if user wants to capture all of user space memory and ok with
-         reserved memory not available to production system, then
-         'fadump=nocma' kernel parameter can be used to fallback to
-         old behaviour.
+NOTE:
+     1. 'fadump_reserve_mem=' parameter has been deprecated. Instead
+        use 'crashkernel=' to specify size of the memory to reserve
+        for boot memory dump preservation.
+     2. If firmware-assisted dump fails to reserve memory then it
+        will fallback to existing kdump mechanism if 'crashkernel='
+        option is set at kernel cmdline.
+     3. if user wants to capture all of user space memory and ok with
+        reserved memory not available to production system, then
+        'fadump=nocma' kernel parameter can be used to fallback to
+        old behaviour.
 
 Sysfs/debugfs files:
-------------
+--------------------
 
 Firmware-assisted dump feature uses sysfs file system to hold
 the control files and debugfs file to display memory reserved region.
@@ -197,20 +201,20 @@ the control files and debugfs file to display memory reserved region.
 Here is the list of files under kernel sysfs:
 
  /sys/kernel/fadump_enabled
-
     This is used to display the fadump status.
-    0 = fadump is disabled
-    1 = fadump is enabled
+
+    - 0 = fadump is disabled
+    - 1 = fadump is enabled
 
     This interface can be used by kdump init scripts to identify if
     fadump is enabled in the kernel and act accordingly.
 
  /sys/kernel/fadump_registered
-
     This is used to display the fadump registration status as well
     as to control (start/stop) the fadump registration.
-    0 = fadump is not registered.
-    1 = fadump is registered and ready to handle system crash.
+
+    - 0 = fadump is not registered.
+    - 1 = fadump is registered and ready to handle system crash.
 
     To register fadump echo 1 > /sys/kernel/fadump_registered and
     echo 0 > /sys/kernel/fadump_registered for un-register and stop the
@@ -219,13 +223,12 @@ Here is the list of files under kernel sysfs:
     easily integrated with kdump service start/stop.
 
  /sys/kernel/fadump_release_mem
-
     This file is available only when fadump is active during
     second kernel. This is used to release the reserved memory
     region that are held for saving crash dump. To release the
-    reserved memory echo 1 to it:
+    reserved memory echo 1 to it::
 
-    echo 1  > /sys/kernel/fadump_release_mem
+	echo 1  > /sys/kernel/fadump_release_mem
 
     After echo 1, the content of the /sys/kernel/debug/powerpc/fadump_region
     file will change to reflect the new memory reservations.
@@ -238,38 +241,39 @@ Here is the list of files under powerpc debugfs:
 (Assuming debugfs is mounted on /sys/kernel/debug directory.)
 
  /sys/kernel/debug/powerpc/fadump_region
-
     This file shows the reserved memory regions if fadump is
     enabled otherwise this file is empty. The output format
-    is:
-    <region>: [<start>-<end>] <reserved-size> bytes, Dumped: <dump-size>
+    is::
+
+      <region>: [<start>-<end>] <reserved-size> bytes, Dumped: <dump-size>
 
     e.g.
-    Contents when fadump is registered during first kernel
+    Contents when fadump is registered during first kernel::
 
-    # cat /sys/kernel/debug/powerpc/fadump_region
-    CPU : [0x0000006ffb0000-0x0000006fff001f] 0x40020 bytes, Dumped: 0x0
-    HPTE: [0x0000006fff0020-0x0000006fff101f] 0x1000 bytes, Dumped: 0x0
-    DUMP: [0x0000006fff1020-0x0000007fff101f] 0x10000000 bytes, Dumped: 0x0
+      # cat /sys/kernel/debug/powerpc/fadump_region
+      CPU : [0x0000006ffb0000-0x0000006fff001f] 0x40020 bytes, Dumped: 0x0
+      HPTE: [0x0000006fff0020-0x0000006fff101f] 0x1000 bytes, Dumped: 0x0
+      DUMP: [0x0000006fff1020-0x0000007fff101f] 0x10000000 bytes, Dumped: 0x0
 
-    Contents when fadump is active during second kernel
+    Contents when fadump is active during second kernel::
 
-    # cat /sys/kernel/debug/powerpc/fadump_region
-    CPU : [0x0000006ffb0000-0x0000006fff001f] 0x40020 bytes, Dumped: 0x40020
-    HPTE: [0x0000006fff0020-0x0000006fff101f] 0x1000 bytes, Dumped: 0x1000
-    DUMP: [0x0000006fff1020-0x0000007fff101f] 0x10000000 bytes, Dumped: 0x10000000
-        : [0x00000010000000-0x0000006ffaffff] 0x5ffb0000 bytes, Dumped: 0x5ffb0000
+      # cat /sys/kernel/debug/powerpc/fadump_region
+      CPU : [0x0000006ffb0000-0x0000006fff001f] 0x40020 bytes, Dumped: 0x40020
+      HPTE: [0x0000006fff0020-0x0000006fff101f] 0x1000 bytes, Dumped: 0x1000
+      DUMP: [0x0000006fff1020-0x0000007fff101f] 0x10000000 bytes, Dumped: 0x10000000
+          : [0x00000010000000-0x0000006ffaffff] 0x5ffb0000 bytes, Dumped: 0x5ffb0000
 
-NOTE: Please refer to Documentation/filesystems/debugfs.txt on
+NOTE:
+      Please refer to Documentation/filesystems/debugfs.txt on
       how to mount the debugfs filesystem.
 
 
 TODO:
 -----
- o Need to come up with the better approach to find out more
+ - Need to come up with the better approach to find out more
    accurate boot memory size that is required for a kernel to
    boot successfully when booted with restricted memory.
- o The fadump implementation introduces a fadump crash info structure
+ - The fadump implementation introduces a fadump crash info structure
    in the scratch area before the ELF core header. The idea of introducing
    this structure is to pass some important crash info data to the second
    kernel which will help second kernel to populate ELF core header with
@@ -277,7 +281,9 @@ TODO:
    design implementation does not address a possibility of introducing
    additional fields (in future) to this structure without affecting
    compatibility. Need to come up with the better approach to address this.
+
    The possible approaches are:
+
 	1. Introduce version field for version tracking, bump up the version
 	whenever a new field is added to the structure in future. The version
 	field can be used to find out what fields are valid for the current
@@ -285,8 +291,11 @@ TODO:
 	2. Reserve the area of predefined size (say PAGE_SIZE) for this
 	structure and have unused area as reserved (initialized to zero)
 	for future field additions.
+
    The advantage of approach 1 over 2 is we don't need to reserve extra space.
----
+
 Author: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
+
 This document is based on the original documentation written for phyp
+
 assisted dump by Linas Vepstas and Manish Ahuja.
diff --git a/Documentation/powerpc/hvcs.txt b/Documentation/powerpc/hvcs.rst
similarity index 91%
rename from Documentation/powerpc/hvcs.txt
rename to Documentation/powerpc/hvcs.rst
index a730ca5a07f8..6808acde672f 100644
--- a/Documentation/powerpc/hvcs.txt
+++ b/Documentation/powerpc/hvcs.rst
@@ -1,19 +1,22 @@
-===========================================================================
-				   HVCS
-	IBM "Hypervisor Virtual Console Server" Installation Guide
-			  for Linux Kernel 2.6.4+
-		    Copyright (C) 2004 IBM Corporation
+===============================================================
+HVCS IBM "Hypervisor Virtual Console Server" Installation Guide
+===============================================================
 
-===========================================================================
-NOTE:Eight space tabs are the optimum editor setting for reading this file.
-===========================================================================
+for Linux Kernel 2.6.4+
 
-	       Author(s) :  Ryan S. Arnold <rsa@us.ibm.com>
-		       Date Created: March, 02, 2004
-		       Last Changed: August, 24, 2004
+Copyright (C) 2004 IBM Corporation
 
----------------------------------------------------------------------------
-Table of contents:
+.. ===========================================================================
+.. NOTE:Eight space tabs are the optimum editor setting for reading this file.
+.. ===========================================================================
+
+
+Author(s): Ryan S. Arnold <rsa@us.ibm.com>
+
+Date Created: March, 02, 2004
+Last Changed: August, 24, 2004
+
+.. Table of contents:
 
 	1.  Driver Introduction:
 	2.  System Requirements
@@ -27,8 +30,8 @@ Table of contents:
 	8.  Questions & Answers:
 	9.  Reporting Bugs:
 
----------------------------------------------------------------------------
 1. Driver Introduction:
+=======================
 
 This is the device driver for the IBM Hypervisor Virtual Console Server,
 "hvcs".  The IBM hvcs provides a tty driver interface to allow Linux user
@@ -38,8 +41,8 @@ ppc64 system.  Physical hardware consoles per partition are not practical
 on this hardware so system consoles are accessed by this driver using
 firmware interfaces to virtual terminal devices.
 
----------------------------------------------------------------------------
 2. System Requirements:
+=======================
 
 This device driver was written using 2.6.4 Linux kernel APIs and will only
 build and run on kernels of this version or later.
@@ -52,8 +55,8 @@ Sysfs must be mounted on the system so that the user can determine which
 major and minor numbers are associated with each vty-server.  Directions
 for sysfs mounting are outside the scope of this document.
 
----------------------------------------------------------------------------
 3. Build Options:
+=================
 
 The hvcs driver registers itself as a tty driver.  The tty layer
 dynamically allocates a block of major and minor numbers in a quantity
@@ -65,11 +68,11 @@ If the default number of device entries is adequate then this driver can be
 built into the kernel.  If not, the default can be over-ridden by inserting
 the driver as a module with insmod parameters.
 
----------------------------------------------------------------------------
 3.1 Built-in:
+-------------
 
 The following menuconfig example demonstrates selecting to build this
-driver into the kernel.
+driver into the kernel::
 
 	Device Drivers  --->
 		Character devices  --->
@@ -77,11 +80,11 @@ driver into the kernel.
 
 Begin the kernel make process.
 
----------------------------------------------------------------------------
 3.2 Module:
+-----------
 
 The following menuconfig example demonstrates selecting to build this
-driver as a kernel module.
+driver as a kernel module::
 
 	Device Drivers  --->
 		Character devices  --->
@@ -89,11 +92,11 @@ driver as a kernel module.
 
 The make process will build the following kernel modules:
 
-	hvcs.ko
-	hvcserver.ko
+	- hvcs.ko
+	- hvcserver.ko
 
 To insert the module with the default allocation execute the following
-commands in the order they appear:
+commands in the order they appear::
 
 	insmod hvcserver.ko
 	insmod hvcs.ko
@@ -103,7 +106,7 @@ be inserted first, otherwise the hvcs module will not find some of the
 symbols it expects.
 
 To override the default use an insmod parameter as follows (requesting 4
-tty devices as an example):
+tty devices as an example)::
 
 	insmod hvcs.ko hvcs_parm_num_devs=4
 
@@ -115,31 +118,31 @@ source file before building.
 NOTE: The length of time it takes to insmod the driver seems to be related
 to the number of tty interfaces the registering driver requests.
 
-In order to remove the driver module execute the following command:
+In order to remove the driver module execute the following command::
 
 	rmmod hvcs.ko
 
 The recommended method for installing hvcs as a module is to use depmod to
 build a current modules.dep file in /lib/modules/`uname -r` and then
-execute:
+execute::
 
-modprobe hvcs hvcs_parm_num_devs=4
+	modprobe hvcs hvcs_parm_num_devs=4
 
 The modules.dep file indicates that hvcserver.ko needs to be inserted
 before hvcs.ko and modprobe uses this file to smartly insert the modules in
 the proper order.
 
 The following modprobe command is used to remove hvcs and hvcserver in the
-proper order:
+proper order::
 
-modprobe -r hvcs
+	modprobe -r hvcs
 
----------------------------------------------------------------------------
 4. Installation:
+================
 
 The tty layer creates sysfs entries which contain the major and minor
 numbers allocated for the hvcs driver.  The following snippet of "tree"
-output of the sysfs directory shows where these numbers are presented:
+output of the sysfs directory shows where these numbers are presented::
 
 	sys/
 	|-- *other sysfs base dirs*
@@ -164,7 +167,7 @@ output of the sysfs directory shows where these numbers are presented:
 	|-- *other sysfs base dirs*
 
 For the above examples the following output is a result of cat'ing the
-"dev" entry in the hvcs directory:
+"dev" entry in the hvcs directory::
 
 	Pow5:/sys/class/tty/hvcs0/ # cat dev
 	254:0
@@ -184,7 +187,7 @@ systems running hvcs will already have the device entries created or udev
 will do it automatically.
 
 Given the example output above, to manually create a /dev/hvcs* node entry
-mknod can be used as follows:
+mknod can be used as follows::
 
 	mknod /dev/hvcs0 c 254 0
 	mknod /dev/hvcs1 c 254 1
@@ -195,15 +198,15 @@ Using mknod to manually create the device entries makes these device nodes
 persistent.  Once created they will exist prior to the driver insmod.
 
 Attempting to connect an application to /dev/hvcs* prior to insertion of
-the hvcs module will result in an error message similar to the following:
+the hvcs module will result in an error message similar to the following::
 
 	"/dev/hvcs*: No such device".
 
 NOTE: Just because there is a device node present doesn't mean that there
 is a vty-server device configured for that node.
 
----------------------------------------------------------------------------
 5. Connection
+=============
 
 Since this driver controls devices that provide a tty interface a user can
 interact with the device node entries using any standard tty-interactive
@@ -249,7 +252,7 @@ vty-server adapter is associated with which /dev/hvcs* node a special sysfs
 attribute has been added to each vty-server sysfs entry.  This entry is
 called "index" and showing it reveals an integer that refers to the
 /dev/hvcs* entry to use to connect to that device.  For instance cating the
-index attribute of vty-server adapter 30000004 shows the following.
+index attribute of vty-server adapter 30000004 shows the following::
 
 	Pow5:/sys/bus/vio/drivers/hvcs/30000004 # cat index
 	2
@@ -262,8 +265,8 @@ system the /dev/hvcs* entry that interacts with a particular vty-server
 adapter is not guaranteed to remain the same across system reboots.  Look
 in the Q & A section for more on this issue.
 
----------------------------------------------------------------------------
 6. Disconnection
+================
 
 As a security feature to prevent the delivery of stale data to an
 unintended target the Power5 system firmware disables the fetching of data
@@ -305,7 +308,7 @@ connection between the vty-server and target vty ONLY if the vterm_state
 previously read '1'.  The write directive is ignored if the vterm_state
 read '0' or if any value other than '0' was written to the vterm_state
 attribute.  The following example will show the method used for verifying
-the vty-server connection status and disconnecting a vty-server connection.
+the vty-server connection status and disconnecting a vty-server connection::
 
 	Pow5:/sys/bus/vio/drivers/hvcs/30000004 # cat vterm_state
 	1
@@ -318,12 +321,12 @@ the vty-server connection status and disconnecting a vty-server connection.
 All vty-server connections are automatically terminated when the device is
 hotplug removed and when the module is removed.
 
----------------------------------------------------------------------------
 7. Configuration
+================
 
 Each vty-server has a sysfs entry in the /sys/devices/vio directory, which
 is symlinked in several other sysfs tree directories, notably under the
-hvcs driver entry, which looks like the following example:
+hvcs driver entry, which looks like the following example::
 
 	Pow5:/sys/bus/vio/drivers/hvcs # ls
 	.  ..  30000003  30000004  rescan
@@ -344,7 +347,7 @@ completed or was never executed.
 
 Vty-server entries in this directory are a 32 bit partition unique unit
 address that is created by firmware.  An example vty-server sysfs entry
-looks like the following:
+looks like the following::
 
 	Pow5:/sys/bus/vio/drivers/hvcs/30000004 # ls
 	.   current_vty   devspec       name          partner_vtys
@@ -352,21 +355,21 @@ looks like the following:
 
 Each entry is provided, by default with a "name" attribute.  Reading the
 "name" attribute will reveal the device type as shown in the following
-example:
+example::
 
 	Pow5:/sys/bus/vio/drivers/hvcs/30000003 # cat name
 	vty-server
 
 Each entry is also provided, by default, with a "devspec" attribute which
 reveals the full device specification when read, as shown in the following
-example:
+example::
 
 	Pow5:/sys/bus/vio/drivers/hvcs/30000004 # cat devspec
 	/vdevice/vty-server@30000004
 
 Each vty-server sysfs dir is provided with two read-only attributes that
 provide lists of easily parsed partner vty data: "partner_vtys" and
-"partner_clcs".
+"partner_clcs"::
 
 	Pow5:/sys/bus/vio/drivers/hvcs/30000004 # cat partner_vtys
 	30000000
@@ -396,7 +399,7 @@ A vty-server can only be connected to a single vty at a time.  The entry,
 read.
 
 The current_vty can be changed by writing a valid partner clc to the entry
-as in the following example:
+as in the following example::
 
 	Pow5:/sys/bus/vio/drivers/hvcs/30000004 # echo U5112.428.10304
 	8A-V4-C0 > current_vty
@@ -408,9 +411,9 @@ currently open connection is freed.
 Information on the "vterm_state" attribute was covered earlier on the
 chapter entitled "disconnection".
 
----------------------------------------------------------------------------
 8. Questions & Answers:
-===========================================================================
+=======================
+
 Q: What are the security concerns involving hvcs?
 
 A: There are three main security concerns:
@@ -429,6 +432,7 @@ A: There are three main security concerns:
 	partition) will experience the previously logged in session.
 
 ---------------------------------------------------------------------------
+
 Q: How do I multiplex a console that I grab through hvcs so that other
 people can see it:
 
@@ -440,6 +444,7 @@ term type "screen" to others.  This means that curses based programs may
 not display properly in screen sessions.
 
 ---------------------------------------------------------------------------
+
 Q: Why are the colors all messed up?
 Q: Why are the control characters acting strange or not working?
 Q: Why is the console output all strange and unintelligible?
@@ -455,6 +460,7 @@ disconnect from the console.  This will ensure that the next user gets
 their own TERM type set when they login.
 
 ---------------------------------------------------------------------------
+
 Q: When I try to CONNECT kermit to an hvcs device I get:
 "Sorry, can't open connection: /dev/hvcs*"What is happening?
 
@@ -490,6 +496,7 @@ A: There is not a corresponding vty-server device that maps to an existing
 /dev/hvcs* entry.
 
 ---------------------------------------------------------------------------
+
 Q: When I try to CONNECT kermit to an hvcs device I get:
 "Sorry, write access to UUCP lockfile directory denied."
 
@@ -497,6 +504,7 @@ A: The /dev/hvcs* entry you have specified doesn't exist where you said it
 does?  Maybe you haven't inserted the module (on systems with udev).
 
 ---------------------------------------------------------------------------
+
 Q: If I already have one Linux partition installed can I use hvcs on said
 partition to provide the console for the install of a second Linux
 partition?
@@ -505,6 +513,7 @@ A: Yes granted that your are connected to the /dev/hvcs* device using
 kermit or cu or some other program that doesn't provide terminal emulation.
 
 ---------------------------------------------------------------------------
+
 Q: Can I connect to more than one partition's console at a time using this
 driver?
 
@@ -512,6 +521,7 @@ A: Yes.  Of course this means that there must be more than one vty-server
 configured for this partition and each must point to a disconnected vty.
 
 ---------------------------------------------------------------------------
+
 Q: Does the hvcs driver support dynamic (hotplug) addition of devices?
 
 A: Yes, if you have dlpar and hotplug enabled for your system and it has
@@ -519,6 +529,7 @@ been built into the kernel the hvcs drivers is configured to dynamically
 handle additions of new devices and removals of unused devices.
 
 ---------------------------------------------------------------------------
+
 Q: For some reason /dev/hvcs* doesn't map to the same vty-server adapter
 after a reboot.  What happened?
 
@@ -533,6 +544,7 @@ on how to determine which vty-server goes with which /dev/hvcs* node.
 Hint; look at the sysfs "index" attribute for the vty-server.
 
 ---------------------------------------------------------------------------
+
 Q: Can I use /dev/hvcs* as a conduit to another partition and use a tty
 device on that partition as the other end of the pipe?
 
@@ -554,7 +566,9 @@ read or write to /dev/hvcs*.  Now you have a tty conduit between two
 partitions.
 
 ---------------------------------------------------------------------------
+
 9. Reporting Bugs:
+==================
 
 The proper channel for reporting bugs is either through the Linux OS
 distribution company that provided your OS or by posting issues to the
diff --git a/Documentation/powerpc/index.rst b/Documentation/powerpc/index.rst
new file mode 100644
index 000000000000..1ff17268db46
--- /dev/null
+++ b/Documentation/powerpc/index.rst
@@ -0,0 +1,34 @@
+:orphan:
+
+=======
+powerpc
+=======
+
+.. toctree::
+    :maxdepth: 1
+
+    bootwrapper
+    cpu_families
+    cpu_features
+    cxl
+    cxlflash
+    dawr-power9
+    dscr
+    eeh-pci-error-recovery
+    firmware-assisted-dump
+    hvcs
+    isa-versions
+    mpc52xx
+    pci_iov_resource_on_powernv
+    pmu-ebb
+    ptrace
+    qe_firmware
+    syscall64-abi
+    transactional_memory
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/powerpc/isa-versions.rst b/Documentation/powerpc/isa-versions.rst
index 812e20cc898c..a363d8c1603c 100644
--- a/Documentation/powerpc/isa-versions.rst
+++ b/Documentation/powerpc/isa-versions.rst
@@ -1,11 +1,12 @@
+==========================
 CPU to ISA Version Mapping
 ==========================
 
 Mapping of some CPU versions to relevant ISA versions.
 
-========= ====================
+========= ====================================================================
 CPU       Architecture version
-========= ====================
+========= ====================================================================
 Power9    Power ISA v3.0B
 Power8    Power ISA v2.07
 Power7    Power ISA v2.06
@@ -22,7 +23,7 @@ PPC970    - PowerPC User Instruction Set Architecture Book I v2.01
           - PowerPC Virtual Environment Architecture Book II v2.01
           - PowerPC Operating Environment Architecture Book III v2.01
           - Plus Altivec/VMX ~= 2.03
-========= ====================
+========= ====================================================================
 
 
 Key Features
@@ -58,9 +59,9 @@ Power5     No
 PPC970     No
 ========== ====
 
-========== ====================
+========== ====================================
 CPU        Transactional Memory
-========== ====================
+========== ====================================
 Power9     Yes (* see transactional_memory.txt)
 Power8     Yes
 Power7     No
@@ -71,4 +72,4 @@ Power5++   No
 Power5+    No
 Power5     No
 PPC970     No
-========== ====================
+========== ====================================
diff --git a/Documentation/powerpc/mpc52xx.txt b/Documentation/powerpc/mpc52xx.rst
similarity index 91%
rename from Documentation/powerpc/mpc52xx.txt
rename to Documentation/powerpc/mpc52xx.rst
index 0d540a31ea1a..8676ac63e077 100644
--- a/Documentation/powerpc/mpc52xx.txt
+++ b/Documentation/powerpc/mpc52xx.rst
@@ -1,11 +1,13 @@
+=============================
 Linux 2.6.x on MPC52xx family
------------------------------
+=============================
 
 For the latest info, go to http://www.246tNt.com/mpc52xx/
 
 To compile/use :
 
-  - U-Boot:
+  - U-Boot::
+
      # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
         if you wish to ).
      # make lite5200_defconfig
@@ -16,7 +18,8 @@ To compile/use :
      => tftpboot 400000 pRamdisk
      => bootm 200000 400000
 
-  - DBug:
+  - DBug::
+
      # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
         if you wish to ).
      # make lite5200_defconfig
@@ -28,7 +31,8 @@ To compile/use :
      DBug> dn -i zImage.initrd.lite5200
 
 
-Some remarks :
+Some remarks:
+
  - The port is named mpc52xxx, and config options are PPC_MPC52xx. The MGT5100
    is not supported, and I'm not sure anyone is interesting in working on it
    so. I didn't took 5xxx because there's apparently a lot of 5xxx that have
diff --git a/Documentation/powerpc/pci_iov_resource_on_powernv.txt b/Documentation/powerpc/pci_iov_resource_on_powernv.rst
similarity index 97%
rename from Documentation/powerpc/pci_iov_resource_on_powernv.txt
rename to Documentation/powerpc/pci_iov_resource_on_powernv.rst
index b55c5cd83f8d..f5a5793e1613 100644
--- a/Documentation/powerpc/pci_iov_resource_on_powernv.txt
+++ b/Documentation/powerpc/pci_iov_resource_on_powernv.rst
@@ -1,6 +1,13 @@
+===================================================
+PCI Express I/O Virtualization Resource on Powerenv
+===================================================
+
 Wei Yang <weiyang@linux.vnet.ibm.com>
+
 Benjamin Herrenschmidt <benh@au1.ibm.com>
+
 Bjorn Helgaas <bhelgaas@google.com>
+
 26 Aug 2014
 
 This document describes the requirement from hardware for PCI MMIO resource
@@ -10,6 +17,7 @@ Endpoints and the implementation on P8 (IODA2). The next two sections talks
 about considerations on enabling SRIOV on IODA2.
 
 1. Introduction to Partitionable Endpoints
+==========================================
 
 A Partitionable Endpoint (PE) is a way to group the various resources
 associated with a device or a set of devices to provide isolation between
@@ -35,6 +43,7 @@ is a completely separate HW entity that replicates the entire logic, so has
 its own set of PEs, etc.
 
 2. Implementation of Partitionable Endpoints on P8 (IODA2)
+==========================================================
 
 P8 supports up to 256 Partitionable Endpoints per PHB.
 
@@ -149,6 +158,7 @@ P8 supports up to 256 Partitionable Endpoints per PHB.
     sense, but we haven't done it yet.
 
 3. Considerations for SR-IOV on PowerKVM
+========================================
 
   * SR-IOV Background
 
@@ -224,7 +234,7 @@ P8 supports up to 256 Partitionable Endpoints per PHB.
   IODA supports 256 PEs, so segmented windows contain 256 segments, so if
   total_VFs is less than 256, we have the situation in Figure 1.0, where
   segments [total_VFs, 255] of the M64 window may map to some MMIO range on
-  other devices:
+  other devices::
 
      0      1                     total_VFs - 1
      +------+------+-     -+------+------+
@@ -243,7 +253,7 @@ P8 supports up to 256 Partitionable Endpoints per PHB.
 		Figure 1.0 Direct map VF(n) BAR space
 
   Our current solution is to allocate 256 segments even if the VF(n) BAR
-  space doesn't need that much, as shown in Figure 1.1:
+  space doesn't need that much, as shown in Figure 1.1::
 
      0      1                     total_VFs - 1                255
      +------+------+-     -+------+------+-      -+------+------+
@@ -269,6 +279,7 @@ P8 supports up to 256 Partitionable Endpoints per PHB.
   responds to segments [total_VFs, 255].
 
 4. Implications for the Generic PCI Code
+========================================
 
 The PCIe SR-IOV spec requires that the base of the VF(n) BAR space be
 aligned to the size of an individual VF BAR.
diff --git a/Documentation/powerpc/pmu-ebb.txt b/Documentation/powerpc/pmu-ebb.rst
similarity index 99%
rename from Documentation/powerpc/pmu-ebb.txt
rename to Documentation/powerpc/pmu-ebb.rst
index 73cd163dbfb8..4f474758eb55 100644
--- a/Documentation/powerpc/pmu-ebb.txt
+++ b/Documentation/powerpc/pmu-ebb.rst
@@ -1,3 +1,4 @@
+========================
 PMU Event Based Branches
 ========================
 
diff --git a/Documentation/powerpc/ptrace.rst b/Documentation/powerpc/ptrace.rst
new file mode 100644
index 000000000000..864d4b6dddd1
--- /dev/null
+++ b/Documentation/powerpc/ptrace.rst
@@ -0,0 +1,156 @@
+======
+Ptrace
+======
+
+GDB intends to support the following hardware debug features of BookE
+processors:
+
+4 hardware breakpoints (IAC)
+2 hardware watchpoints (read, write and read-write) (DAC)
+2 value conditions for the hardware watchpoints (DVC)
+
+For that, we need to extend ptrace so that GDB can query and set these
+resources. Since we're extending, we're trying to create an interface
+that's extendable and that covers both BookE and server processors, so
+that GDB doesn't need to special-case each of them. We added the
+following 3 new ptrace requests.
+
+1. PTRACE_PPC_GETHWDEBUGINFO
+============================
+
+Query for GDB to discover the hardware debug features. The main info to
+be returned here is the minimum alignment for the hardware watchpoints.
+BookE processors don't have restrictions here, but server processors have
+an 8-byte alignment restriction for hardware watchpoints. We'd like to avoid
+adding special cases to GDB based on what it sees in AUXV.
+
+Since we're at it, we added other useful info that the kernel can return to
+GDB: this query will return the number of hardware breakpoints, hardware
+watchpoints and whether it supports a range of addresses and a condition.
+The query will fill the following structure provided by the requesting process::
+
+  struct ppc_debug_info {
+       unit32_t version;
+       unit32_t num_instruction_bps;
+       unit32_t num_data_bps;
+       unit32_t num_condition_regs;
+       unit32_t data_bp_alignment;
+       unit32_t sizeof_condition; /* size of the DVC register */
+       uint64_t features; /* bitmask of the individual flags */
+  };
+
+features will have bits indicating whether there is support for::
+
+  #define PPC_DEBUG_FEATURE_INSN_BP_RANGE		0x1
+  #define PPC_DEBUG_FEATURE_INSN_BP_MASK		0x2
+  #define PPC_DEBUG_FEATURE_DATA_BP_RANGE		0x4
+  #define PPC_DEBUG_FEATURE_DATA_BP_MASK		0x8
+  #define PPC_DEBUG_FEATURE_DATA_BP_DAWR		0x10
+
+2. PTRACE_SETHWDEBUG
+
+Sets a hardware breakpoint or watchpoint, according to the provided structure::
+
+  struct ppc_hw_breakpoint {
+        uint32_t version;
+  #define PPC_BREAKPOINT_TRIGGER_EXECUTE  0x1
+  #define PPC_BREAKPOINT_TRIGGER_READ     0x2
+ #define PPC_BREAKPOINT_TRIGGER_WRITE    0x4
+        uint32_t trigger_type;       /* only some combinations allowed */
+  #define PPC_BREAKPOINT_MODE_EXACT               0x0
+  #define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE     0x1
+  #define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE     0x2
+  #define PPC_BREAKPOINT_MODE_MASK                0x3
+        uint32_t addr_mode;          /* address match mode */
+
+  #define PPC_BREAKPOINT_CONDITION_MODE   0x3
+  #define PPC_BREAKPOINT_CONDITION_NONE   0x0
+  #define PPC_BREAKPOINT_CONDITION_AND    0x1
+  #define PPC_BREAKPOINT_CONDITION_EXACT  0x1	/* different name for the same thing as above */
+  #define PPC_BREAKPOINT_CONDITION_OR     0x2
+  #define PPC_BREAKPOINT_CONDITION_AND_OR 0x3
+  #define PPC_BREAKPOINT_CONDITION_BE_ALL 0x00ff0000	/* byte enable bits */
+  #define PPC_BREAKPOINT_CONDITION_BE(n)  (1<<((n)+16))
+        uint32_t condition_mode;     /* break/watchpoint condition flags */
+
+        uint64_t addr;
+        uint64_t addr2;
+        uint64_t condition_value;
+  };
+
+A request specifies one event, not necessarily just one register to be set.
+For instance, if the request is for a watchpoint with a condition, both the
+DAC and DVC registers will be set in the same request.
+
+With this GDB can ask for all kinds of hardware breakpoints and watchpoints
+that the BookE supports. COMEFROM breakpoints available in server processors
+are not contemplated, but that is out of the scope of this work.
+
+ptrace will return an integer (handle) uniquely identifying the breakpoint or
+watchpoint just created. This integer will be used in the PTRACE_DELHWDEBUG
+request to ask for its removal. Return -ENOSPC if the requested breakpoint
+can't be allocated on the registers.
+
+Some examples of using the structure to:
+
+- set a breakpoint in the first breakpoint register::
+
+    p.version         = PPC_DEBUG_CURRENT_VERSION;
+    p.trigger_type    = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+    p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+    p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+    p.addr            = (uint64_t) address;
+    p.addr2           = 0;
+    p.condition_value = 0;
+
+- set a watchpoint which triggers on reads in the second watchpoint register::
+
+    p.version         = PPC_DEBUG_CURRENT_VERSION;
+    p.trigger_type    = PPC_BREAKPOINT_TRIGGER_READ;
+    p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+    p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+    p.addr            = (uint64_t) address;
+    p.addr2           = 0;
+    p.condition_value = 0;
+
+- set a watchpoint which triggers only with a specific value::
+
+    p.version         = PPC_DEBUG_CURRENT_VERSION;
+    p.trigger_type    = PPC_BREAKPOINT_TRIGGER_READ;
+    p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+    p.condition_mode  = PPC_BREAKPOINT_CONDITION_AND | PPC_BREAKPOINT_CONDITION_BE_ALL;
+    p.addr            = (uint64_t) address;
+    p.addr2           = 0;
+    p.condition_value = (uint64_t) condition;
+
+- set a ranged hardware breakpoint::
+
+    p.version         = PPC_DEBUG_CURRENT_VERSION;
+    p.trigger_type    = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+    p.addr_mode       = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
+    p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+    p.addr            = (uint64_t) begin_range;
+    p.addr2           = (uint64_t) end_range;
+    p.condition_value = 0;
+
+- set a watchpoint in server processors (BookS)::
+
+    p.version         = 1;
+    p.trigger_type    = PPC_BREAKPOINT_TRIGGER_RW;
+    p.addr_mode       = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
+    or
+    p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+
+    p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+    p.addr            = (uint64_t) begin_range;
+    /* For PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE addr2 needs to be specified, where
+     * addr2 - addr <= 8 Bytes.
+     */
+    p.addr2           = (uint64_t) end_range;
+    p.condition_value = 0;
+
+3. PTRACE_DELHWDEBUG
+
+Takes an integer which identifies an existing breakpoint or watchpoint
+(i.e., the value returned from PTRACE_SETHWDEBUG), and deletes the
+corresponding breakpoint or watchpoint..
diff --git a/Documentation/powerpc/ptrace.txt b/Documentation/powerpc/ptrace.txt
deleted file mode 100644
index 99c5ce88d0fe..000000000000
--- a/Documentation/powerpc/ptrace.txt
+++ /dev/null
@@ -1,151 +0,0 @@
-GDB intends to support the following hardware debug features of BookE
-processors:
-
-4 hardware breakpoints (IAC)
-2 hardware watchpoints (read, write and read-write) (DAC)
-2 value conditions for the hardware watchpoints (DVC)
-
-For that, we need to extend ptrace so that GDB can query and set these
-resources. Since we're extending, we're trying to create an interface
-that's extendable and that covers both BookE and server processors, so
-that GDB doesn't need to special-case each of them. We added the
-following 3 new ptrace requests.
-
-1. PTRACE_PPC_GETHWDEBUGINFO
-
-Query for GDB to discover the hardware debug features. The main info to
-be returned here is the minimum alignment for the hardware watchpoints.
-BookE processors don't have restrictions here, but server processors have
-an 8-byte alignment restriction for hardware watchpoints. We'd like to avoid
-adding special cases to GDB based on what it sees in AUXV.
-
-Since we're at it, we added other useful info that the kernel can return to
-GDB: this query will return the number of hardware breakpoints, hardware
-watchpoints and whether it supports a range of addresses and a condition.
-The query will fill the following structure provided by the requesting process:
-
-struct ppc_debug_info {
-       unit32_t version;
-       unit32_t num_instruction_bps;
-       unit32_t num_data_bps;
-       unit32_t num_condition_regs;
-       unit32_t data_bp_alignment;
-       unit32_t sizeof_condition; /* size of the DVC register */
-       uint64_t features; /* bitmask of the individual flags */
-};
-
-features will have bits indicating whether there is support for:
-
-#define PPC_DEBUG_FEATURE_INSN_BP_RANGE		0x1
-#define PPC_DEBUG_FEATURE_INSN_BP_MASK		0x2
-#define PPC_DEBUG_FEATURE_DATA_BP_RANGE		0x4
-#define PPC_DEBUG_FEATURE_DATA_BP_MASK		0x8
-#define PPC_DEBUG_FEATURE_DATA_BP_DAWR		0x10
-
-2. PTRACE_SETHWDEBUG
-
-Sets a hardware breakpoint or watchpoint, according to the provided structure:
-
-struct ppc_hw_breakpoint {
-        uint32_t version;
-#define PPC_BREAKPOINT_TRIGGER_EXECUTE  0x1
-#define PPC_BREAKPOINT_TRIGGER_READ     0x2
-#define PPC_BREAKPOINT_TRIGGER_WRITE    0x4
-        uint32_t trigger_type;       /* only some combinations allowed */
-#define PPC_BREAKPOINT_MODE_EXACT               0x0
-#define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE     0x1
-#define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE     0x2
-#define PPC_BREAKPOINT_MODE_MASK                0x3
-        uint32_t addr_mode;          /* address match mode */
-
-#define PPC_BREAKPOINT_CONDITION_MODE   0x3
-#define PPC_BREAKPOINT_CONDITION_NONE   0x0
-#define PPC_BREAKPOINT_CONDITION_AND    0x1
-#define PPC_BREAKPOINT_CONDITION_EXACT  0x1	/* different name for the same thing as above */
-#define PPC_BREAKPOINT_CONDITION_OR     0x2
-#define PPC_BREAKPOINT_CONDITION_AND_OR 0x3
-#define PPC_BREAKPOINT_CONDITION_BE_ALL 0x00ff0000	/* byte enable bits */
-#define PPC_BREAKPOINT_CONDITION_BE(n)  (1<<((n)+16))
-        uint32_t condition_mode;     /* break/watchpoint condition flags */
-
-        uint64_t addr;
-        uint64_t addr2;
-        uint64_t condition_value;
-};
-
-A request specifies one event, not necessarily just one register to be set.
-For instance, if the request is for a watchpoint with a condition, both the
-DAC and DVC registers will be set in the same request.
-
-With this GDB can ask for all kinds of hardware breakpoints and watchpoints
-that the BookE supports. COMEFROM breakpoints available in server processors
-are not contemplated, but that is out of the scope of this work.
-
-ptrace will return an integer (handle) uniquely identifying the breakpoint or
-watchpoint just created. This integer will be used in the PTRACE_DELHWDEBUG
-request to ask for its removal. Return -ENOSPC if the requested breakpoint
-can't be allocated on the registers.
-
-Some examples of using the structure to:
-
-- set a breakpoint in the first breakpoint register
-
-  p.version         = PPC_DEBUG_CURRENT_VERSION;
-  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_EXECUTE;
-  p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
-  p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
-  p.addr            = (uint64_t) address;
-  p.addr2           = 0;
-  p.condition_value = 0;
-
-- set a watchpoint which triggers on reads in the second watchpoint register
-
-  p.version         = PPC_DEBUG_CURRENT_VERSION;
-  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_READ;
-  p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
-  p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
-  p.addr            = (uint64_t) address;
-  p.addr2           = 0;
-  p.condition_value = 0;
-
-- set a watchpoint which triggers only with a specific value
-
-  p.version         = PPC_DEBUG_CURRENT_VERSION;
-  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_READ;
-  p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
-  p.condition_mode  = PPC_BREAKPOINT_CONDITION_AND | PPC_BREAKPOINT_CONDITION_BE_ALL;
-  p.addr            = (uint64_t) address;
-  p.addr2           = 0;
-  p.condition_value = (uint64_t) condition;
-
-- set a ranged hardware breakpoint
-
-  p.version         = PPC_DEBUG_CURRENT_VERSION;
-  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_EXECUTE;
-  p.addr_mode       = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
-  p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
-  p.addr            = (uint64_t) begin_range;
-  p.addr2           = (uint64_t) end_range;
-  p.condition_value = 0;
-
-- set a watchpoint in server processors (BookS)
-
-  p.version         = 1;
-  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_RW;
-  p.addr_mode       = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
-  or
-  p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
-
-  p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
-  p.addr            = (uint64_t) begin_range;
-  /* For PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE addr2 needs to be specified, where
-   * addr2 - addr <= 8 Bytes.
-   */
-  p.addr2           = (uint64_t) end_range;
-  p.condition_value = 0;
-
-3. PTRACE_DELHWDEBUG
-
-Takes an integer which identifies an existing breakpoint or watchpoint
-(i.e., the value returned from PTRACE_SETHWDEBUG), and deletes the
-corresponding breakpoint or watchpoint..
diff --git a/Documentation/powerpc/qe_firmware.txt b/Documentation/powerpc/qe_firmware.rst
similarity index 95%
rename from Documentation/powerpc/qe_firmware.txt
rename to Documentation/powerpc/qe_firmware.rst
index e7ac24aec4ff..42f5103140c9 100644
--- a/Documentation/powerpc/qe_firmware.txt
+++ b/Documentation/powerpc/qe_firmware.rst
@@ -1,23 +1,23 @@
-	   Freescale QUICC Engine Firmware Uploading
-	   -----------------------------------------
+=========================================
+Freescale QUICC Engine Firmware Uploading
+=========================================
 
 (c) 2007 Timur Tabi <timur at freescale.com>,
     Freescale Semiconductor
 
-Table of Contents
-=================
+.. Table of Contents
 
-  I - Software License for Firmware
+   I - Software License for Firmware
 
-  II - Microcode Availability
+   II - Microcode Availability
 
-  III - Description and Terminology
+   III - Description and Terminology
 
-  IV - Microcode Programming Details
+   IV - Microcode Programming Details
 
-  V - Firmware Structure Layout
+   V - Firmware Structure Layout
 
-  VI - Sample Code for Creating Firmware Files
+   VI - Sample Code for Creating Firmware Files
 
 Revision Information
 ====================
@@ -39,7 +39,7 @@ http://opensource.freescale.com.  For other firmware files, please contact
 your Freescale representative or your operating system vendor.
 
 III - Description and Terminology
-================================
+=================================
 
 In this document, the term 'microcode' refers to the sequence of 32-bit
 integers that compose the actual QE microcode.
@@ -89,7 +89,7 @@ being fixed in the RAM package utilizing they should be activated.  This data
 structure signals the microcode which of these virtual traps is active.
 
 This structure contains 6 words that the application should copy to some
-specific been defined.  This table describes the structure.
+specific been defined.  This table describes the structure::
 
 	---------------------------------------------------------------
 	| Offset in |                  | Destination Offset | Size of |
@@ -119,7 +119,7 @@ Extended Modes
 This is a double word bit array (64 bits) that defines special functionality
 which has an impact on the software drivers.  Each bit has its own impact
 and has special instructions for the s/w associated with it.  This structure is
-described in this table:
+described in this table::
 
 	-----------------------------------------------------------------------
 	| Bit #  |     Name     |   Description                               |
@@ -220,7 +220,8 @@ The 'model' field is a 16-bit number that matches the actual SOC. The
 'major' and 'minor' fields are the major and minor revision numbers,
 respectively, of the SOC.
 
-For example, to match the 8323, revision 1.0:
+For example, to match the 8323, revision 1.0::
+
      soc.model = 8323
      soc.major = 1
      soc.minor = 0
@@ -273,10 +274,10 @@ library and available to any driver that calles qe_get_firmware_info().
 	'reserved'.
 
 After the last microcode is a 32-bit CRC.  It can be calculated using
-this algorithm:
+this algorithm::
 
-u32 crc32(const u8 *p, unsigned int len)
-{
+  u32 crc32(const u8 *p, unsigned int len)
+  {
 	unsigned int i;
 	u32 crc = 0;
 
@@ -286,7 +287,7 @@ u32 crc32(const u8 *p, unsigned int len)
 		   crc = (crc >> 1) ^ ((crc & 1) ? 0xedb88320 : 0);
 	}
 	return crc;
-}
+  }
 
 VI - Sample Code for Creating Firmware Files
 ============================================
diff --git a/Documentation/powerpc/syscall64-abi.txt b/Documentation/powerpc/syscall64-abi.rst
similarity index 82%
rename from Documentation/powerpc/syscall64-abi.txt
rename to Documentation/powerpc/syscall64-abi.rst
index fa716a0d88bd..e49f69f941b9 100644
--- a/Documentation/powerpc/syscall64-abi.txt
+++ b/Documentation/powerpc/syscall64-abi.rst
@@ -5,12 +5,12 @@ Power Architecture 64-bit Linux system call ABI
 syscall
 =======
 
-syscall calling sequence[*] matches the Power Architecture 64-bit ELF ABI
+syscall calling sequence\ [1]_ matches the Power Architecture 64-bit ELF ABI
 specification C function calling sequence, including register preservation
 rules, with the following differences.
 
-[*] Some syscalls (typically low-level management functions) may have
-    different calling sequences (e.g., rt_sigreturn).
+.. [1] Some syscalls (typically low-level management functions) may have
+       different calling sequences (e.g., rt_sigreturn).
 
 Parameters and return value
 ---------------------------
@@ -33,12 +33,14 @@ Register preservation rules
 Register preservation rules match the ELF ABI calling sequence with the
 following differences:
 
-r0:         Volatile.   (System call number.)
-r3:         Volatile.   (Parameter 1, and return value.)
-r4-r8:      Volatile.   (Parameters 2-6.)
-cr0:        Volatile    (cr0.SO is the return error condition)
-cr1, cr5-7: Nonvolatile.
-lr:         Nonvolatile.
+=========== ============= ========================================
+r0          Volatile      (System call number.)
+r3          Volatile      (Parameter 1, and return value.)
+r4-r8       Volatile      (Parameters 2-6.)
+cr0         Volatile      (cr0.SO is the return error condition)
+cr1, cr5-7  Nonvolatile
+lr          Nonvolatile
+=========== ============= ========================================
 
 All floating point and vector data registers as well as control and status
 registers are nonvolatile.
@@ -90,9 +92,12 @@ The vsyscall may or may not use the caller's stack frame save areas.
 
 Register preservation rules
 ---------------------------
-r0: Volatile.
-cr1, cr5-7: Volatile.
-lr: Volatile.
+
+=========== ========
+r0          Volatile
+cr1, cr5-7  Volatile
+lr          Volatile
+=========== ========
 
 Invocation
 ----------
diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.rst
similarity index 93%
rename from Documentation/powerpc/transactional_memory.txt
rename to Documentation/powerpc/transactional_memory.rst
index 52c023e14f26..09955103acb4 100644
--- a/Documentation/powerpc/transactional_memory.txt
+++ b/Documentation/powerpc/transactional_memory.rst
@@ -1,3 +1,4 @@
+============================
 Transactional Memory support
 ============================
 
@@ -17,29 +18,29 @@ instructions are presented to delimit transactions; transactions are
 guaranteed to either complete atomically or roll back and undo any partial
 changes.
 
-A simple transaction looks like this:
+A simple transaction looks like this::
 
-begin_move_money:
-  tbegin
-  beq   abort_handler
+  begin_move_money:
+    tbegin
+    beq   abort_handler
 
-  ld    r4, SAVINGS_ACCT(r3)
-  ld    r5, CURRENT_ACCT(r3)
-  subi  r5, r5, 1
-  addi  r4, r4, 1
-  std   r4, SAVINGS_ACCT(r3)
-  std   r5, CURRENT_ACCT(r3)
+    ld    r4, SAVINGS_ACCT(r3)
+    ld    r5, CURRENT_ACCT(r3)
+    subi  r5, r5, 1
+    addi  r4, r4, 1
+    std   r4, SAVINGS_ACCT(r3)
+    std   r5, CURRENT_ACCT(r3)
 
-  tend
+    tend
 
-  b     continue
+    b     continue
 
-abort_handler:
-  ... test for odd failures ...
+  abort_handler:
+    ... test for odd failures ...
 
-  /* Retry the transaction if it failed because it conflicted with
-   * someone else: */
-  b     begin_move_money
+    /* Retry the transaction if it failed because it conflicted with
+     * someone else: */
+    b     begin_move_money
 
 
 The 'tbegin' instruction denotes the start point, and 'tend' the end point.
@@ -123,7 +124,7 @@ Transaction-aware signal handlers can read the transactional register state
 from the second ucontext.  This will be necessary for crash handlers to
 determine, for example, the address of the instruction causing the SIGSEGV.
 
-Example signal handler:
+Example signal handler::
 
     void crash_handler(int sig, siginfo_t *si, void *uc)
     {
@@ -133,9 +134,9 @@ Example signal handler:
       if (ucp_link) {
         u64 msr = ucp->uc_mcontext.regs->msr;
         /* May have transactional ucontext! */
-#ifndef __powerpc64__
+  #ifndef __powerpc64__
         msr |= ((u64)transactional_ucp->uc_mcontext.regs->msr) << 32;
-#endif
+  #endif
         if (MSR_TM_ACTIVE(msr)) {
            /* Yes, we crashed during a transaction.  Oops. */
    fprintf(stderr, "Transaction to be restarted at 0x%llx, but "
@@ -176,6 +177,7 @@ Failure cause codes used by kernel
 These are defined in <asm/reg.h>, and distinguish different reasons why the
 kernel aborted a transaction:
 
+ ====================== ================================
  TM_CAUSE_RESCHED       Thread was rescheduled.
  TM_CAUSE_TLBI          Software TLB invalid.
  TM_CAUSE_FAC_UNAV      FP/VEC/VSX unavailable trap.
@@ -184,6 +186,7 @@ kernel aborted a transaction:
  TM_CAUSE_MISC          Currently unused.
  TM_CAUSE_ALIGNMENT     Alignment fault.
  TM_CAUSE_EMULATE       Emulation that touched memory.
+ ====================== ================================
 
 These can be checked by the user program's abort handler as TEXASR[0:7].  If
 bit 7 is set, it indicates that the error is consider persistent.  For example
@@ -203,7 +206,7 @@ POWER9
 ======
 
 TM on POWER9 has issues with storing the complete register state. This
-is described in this commit:
+is described in this commit::
 
     commit 4bb3c7a0208fc13ca70598efd109901a7cd45ae7
     Author: Paul Mackerras <paulus@ozlabs.org>
diff --git a/MAINTAINERS b/MAINTAINERS
index 518b73924d7e..5badbf8fa37b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4326,7 +4326,7 @@ F:	arch/powerpc/platforms/powernv/pci-cxl.c
 F:	drivers/misc/cxl/
 F:	include/misc/cxl*
 F:	include/uapi/misc/cxl.h
-F:	Documentation/powerpc/cxl.txt
+F:	Documentation/powerpc/cxl.rst
 F:	Documentation/ABI/testing/sysfs-class-cxl
 
 CXLFLASH (IBM Coherent Accelerator Processor Interface CAPI Flash) SCSI DRIVER
@@ -4337,7 +4337,7 @@ L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	drivers/scsi/cxlflash/
 F:	include/uapi/scsi/cxlflash_ioctl.h
-F:	Documentation/powerpc/cxlflash.txt
+F:	Documentation/powerpc/cxlflash.rst
 
 CYBERPRO FB DRIVER
 M:	Russell King <linux@armlinux.org.uk>
@@ -12048,7 +12048,7 @@ F:	Documentation/PCI/pci-error-recovery.txt
 F:	drivers/pci/pcie/aer.c
 F:	drivers/pci/pcie/dpc.c
 F:	drivers/pci/pcie/err.c
-F:	Documentation/powerpc/eeh-pci-error-recovery.txt
+F:	Documentation/powerpc/eeh-pci-error-recovery.rst
 F:	arch/powerpc/kernel/eeh*.c
 F:	arch/powerpc/platforms/*/eeh*.c
 F:	arch/powerpc/include/*/eeh*.h
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 9481a117e242..9b9c463e55d1 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -903,7 +903,7 @@ EXC_COMMON(trap_0b_common, 0xb00, unknown_exception)
  *
  * Call convention:
  *
- * syscall register convention is in Documentation/powerpc/syscall64-abi.txt
+ * syscall register convention is in Documentation/powerpc/syscall64-abi.rst
  *
  * For hypercalls, the register convention is as follows:
  * r0 volatile
diff --git a/drivers/soc/fsl/qe/qe.c b/drivers/soc/fsl/qe/qe.c
index 612d9c551be5..53c6778518ac 100644
--- a/drivers/soc/fsl/qe/qe.c
+++ b/drivers/soc/fsl/qe/qe.c
@@ -423,7 +423,7 @@ static void qe_upload_microcode(const void *base,
 /*
  * Upload a microcode to the I-RAM at a specific address.
  *
- * See Documentation/powerpc/qe_firmware.txt for information on QE microcode
+ * See Documentation/powerpc/qe_firmware.rst for information on QE microcode
  * uploading.
  *
  * Currently, only version 1 is supported, so the 'version' field must be
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index cb4db1b3ca3c..5fb214e67d73 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -47,7 +47,7 @@
  * using the 2.6 Linux kernel kref construct.
  *
  * For direction on installation and usage of this driver please reference
- * Documentation/powerpc/hvcs.txt.
+ * Documentation/powerpc/hvcs.rst.
  */
 
 #include <linux/device.h>
diff --git a/include/soc/fsl/qe/qe.h b/include/soc/fsl/qe/qe.h
index b3d1aff5e8ad..7afc6b1df77a 100644
--- a/include/soc/fsl/qe/qe.h
+++ b/include/soc/fsl/qe/qe.h
@@ -263,7 +263,7 @@ static inline int qe_alive_during_sleep(void)
 
 /* Structure that defines QE firmware binary files.
  *
- * See Documentation/powerpc/qe_firmware.txt for a description of these
+ * See Documentation/powerpc/qe_firmware.rst for a description of these
  * fields.
  */
 struct qe_firmware {
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 27/79] docs: pps.txt: convert to ReST and rename to pps.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (24 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 26/79] docs: powerpc: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 16:19     ` Rodolfo Giometti
  2019-04-22 13:27   ` [PATCH v2 28/79] docs: ptp.txt: convert to ReST and move to driver-api Mauro Carvalho Chehab
                     ` (51 subsequent siblings)
  77 siblings, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Rodolfo Giometti

This file is already in a good shape: just its title and
adding some literal block markups is needed for it to be
part of the document.

While it has a small chapter with sysfs stuff, most of
the document is focused on driver development.

As it describes a kernel API, move it to the driver-api
directory.

In order to avoid conflicts, let's add an :orphan: tag
to it, to be removed when added to the driver-api book.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../{pps/pps.txt => driver-api/pps.rst}       | 67 ++++++++++---------
 MAINTAINERS                                   |  2 +-
 2 files changed, 36 insertions(+), 33 deletions(-)
 rename Documentation/{pps/pps.txt => driver-api/pps.rst} (89%)

diff --git a/Documentation/pps/pps.txt b/Documentation/driver-api/pps.rst
similarity index 89%
rename from Documentation/pps/pps.txt
rename to Documentation/driver-api/pps.rst
index 99f5d8c4c652..1456d2c32ebd 100644
--- a/Documentation/pps/pps.txt
+++ b/Documentation/driver-api/pps.rst
@@ -1,8 +1,10 @@
+:orphan:
 
-			PPS - Pulse Per Second
-			----------------------
+======================
+PPS - Pulse Per Second
+======================
 
-(C) Copyright 2007 Rodolfo Giometti <giometti@enneenne.com>
+Copyright (C) 2007 Rodolfo Giometti <giometti@enneenne.com>
 
 This program is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -88,7 +90,7 @@ Coding example
 --------------
 
 To register a PPS source into the kernel you should define a struct
-pps_source_info as follows:
+pps_source_info as follows::
 
     static struct pps_source_info pps_ktimer_info = {
 	    .name         = "ktimer",
@@ -101,12 +103,12 @@ pps_source_info as follows:
     };
 
 and then calling the function pps_register_source() in your
-initialization routine as follows:
+initialization routine as follows::
 
     source = pps_register_source(&pps_ktimer_info,
 			PPS_CAPTUREASSERT | PPS_OFFSETASSERT);
 
-The pps_register_source() prototype is:
+The pps_register_source() prototype is::
 
   int pps_register_source(struct pps_source_info *info, int default_params)
 
@@ -118,7 +120,7 @@ pps_source_info which describe the capabilities of the driver).
 
 Once you have registered a new PPS source into the system you can
 signal an assert event (for example in the interrupt handler routine)
-just using:
+just using::
 
     pps_event(source, &ts, PPS_CAPTUREASSERT, ptr)
 
@@ -134,13 +136,13 @@ Please see the file drivers/pps/clients/pps-ktimer.c for example code.
 SYSFS support
 -------------
 
-If the SYSFS filesystem is enabled in the kernel it provides a new class:
+If the SYSFS filesystem is enabled in the kernel it provides a new class::
 
    $ ls /sys/class/pps/
    pps0/  pps1/  pps2/
 
 Every directory is the ID of a PPS sources defined in the system and
-inside you find several files:
+inside you find several files::
 
    $ ls -F /sys/class/pps/pps0/
    assert     dev        mode       path       subsystem@
@@ -148,7 +150,7 @@ inside you find several files:
 
 
 Inside each "assert" and "clear" file you can find the timestamp and a
-sequence number:
+sequence number::
 
    $ cat /sys/class/pps/pps0/assert
    1170026870.983207967#8
@@ -175,11 +177,11 @@ and the userland tools available in your distribution's pps-tools package,
 http://linuxpps.org , or https://github.com/redlab-i/pps-tools.
 
 Once you have enabled the compilation of pps-ktimer just modprobe it (if
-not statically compiled):
+not statically compiled)::
 
    # modprobe pps-ktimer
 
-and the run ppstest as follow:
+and the run ppstest as follow::
 
    $ ./ppstest /dev/pps1
    trying PPS source "/dev/pps1"
@@ -204,26 +206,27 @@ nor affordable. The cheap way is to load a PPS generator on one of the
 computers (master) and PPS clients on others (slaves), and use very simple
 cables to deliver signals using parallel ports, for example.
 
-Parallel port cable pinout:
-pin	name	master      slave
-1	STROBE	  *------     *
-2	D0	  *     |     *
-3	D1	  *     |     *
-4	D2	  *     |     *
-5	D3	  *     |     *
-6	D4	  *     |     *
-7	D5	  *     |     *
-8	D6	  *     |     *
-9	D7	  *     |     *
-10	ACK	  *     ------*
-11	BUSY	  *           *
-12	PE	  *           *
-13	SEL	  *           *
-14	AUTOFD	  *           *
-15	ERROR	  *           *
-16	INIT	  *           *
-17	SELIN	  *           *
-18-25	GND	  *-----------*
+Parallel port cable pinout::
+
+	pin	name	master      slave
+	1	STROBE	  *------     *
+	2	D0	  *     |     *
+	3	D1	  *     |     *
+	4	D2	  *     |     *
+	5	D3	  *     |     *
+	6	D4	  *     |     *
+	7	D5	  *     |     *
+	8	D6	  *     |     *
+	9	D7	  *     |     *
+	10	ACK	  *     ------*
+	11	BUSY	  *           *
+	12	PE	  *           *
+	13	SEL	  *           *
+	14	AUTOFD	  *           *
+	15	ERROR	  *           *
+	16	INIT	  *           *
+	17	SELIN	  *           *
+	18-25	GND	  *-----------*
 
 Please note that parallel port interrupt occurs only on high->low transition,
 so it is used for PPS assert edge. PPS clear edge can be determined only
diff --git a/MAINTAINERS b/MAINTAINERS
index 5badbf8fa37b..be3d80397956 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12543,7 +12543,7 @@ M:	Rodolfo Giometti <giometti@enneenne.com>
 W:	http://wiki.enneenne.com/index.php/LinuxPPS_support
 L:	linuxpps@ml.enneenne.com (subscribers-only)
 S:	Maintained
-F:	Documentation/pps/
+F:	Documentation/driver-api/pps.rst
 F:	Documentation/devicetree/bindings/pps/pps-gpio.txt
 F:	Documentation/ABI/testing/sysfs-pps
 F:	drivers/pps/
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 28/79] docs: ptp.txt: convert to ReST and move to driver-api
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (25 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 27/79] docs: pps.txt: convert to ReST and rename to pps.rst Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 15:40     ` Richard Cochran
  2019-04-22 13:27   ` [PATCH v2 29/79] docs: riscv: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
                     ` (50 subsequent siblings)
  77 siblings, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Richard Cochran, David S. Miller, netdev

The conversion is trivial: just adjust title markups.

In order to avoid conflicts, let's add an :orphan: tag
to it, to be removed when this file gets added to the
driver-api book.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../{ptp/ptp.txt => driver-api/ptp.rst}       | 26 +++++++++++++------
 Documentation/networking/timestamping.txt     |  2 +-
 MAINTAINERS                                   |  2 +-
 3 files changed, 20 insertions(+), 10 deletions(-)
 rename Documentation/{ptp/ptp.txt => driver-api/ptp.rst} (88%)

diff --git a/Documentation/ptp/ptp.txt b/Documentation/driver-api/ptp.rst
similarity index 88%
rename from Documentation/ptp/ptp.txt
rename to Documentation/driver-api/ptp.rst
index 11e904ee073f..b6e65d66d37a 100644
--- a/Documentation/ptp/ptp.txt
+++ b/Documentation/driver-api/ptp.rst
@@ -1,5 +1,8 @@
+:orphan:
 
-* PTP hardware clock infrastructure for Linux
+===========================================
+PTP hardware clock infrastructure for Linux
+===========================================
 
   This patch set introduces support for IEEE 1588 PTP clocks in
   Linux. Together with the SO_TIMESTAMPING socket options, this
@@ -22,7 +25,8 @@
     - Period output signals configurable from user space
     - Synchronization of the Linux system time via the PPS subsystem
 
-** PTP hardware clock kernel API
+PTP hardware clock kernel API
+=============================
 
    A PTP clock driver registers itself with the class driver. The
    class driver handles all of the dealings with user space. The
@@ -36,7 +40,8 @@
    development, it can be useful to have more than one clock in a
    single system, in order to allow performance comparisons.
 
-** PTP hardware clock user space API
+PTP hardware clock user space API
+=================================
 
    The class driver also creates a character device for each
    registered clock. User space can use an open file descriptor from
@@ -49,7 +54,8 @@
    ancillary clock features. User space can receive time stamped
    events via blocking read() and poll().
 
-** Writing clock drivers
+Writing clock drivers
+=====================
 
    Clock drivers include include/linux/ptp_clock_kernel.h and register
    themselves by presenting a 'struct ptp_clock_info' to the
@@ -66,14 +72,17 @@
    class driver, since the lock may also be needed by the clock
    driver's interrupt service routine.
 
-** Supported hardware
+Supported hardware
+==================
+
+   * Freescale eTSEC gianfar
 
-   + Freescale eTSEC gianfar
      - 2 Time stamp external triggers, programmable polarity (opt. interrupt)
      - 2 Alarm registers (optional interrupt)
      - 3 Periodic signals (optional interrupt)
 
-   + National DP83640
+   * National DP83640
+
      - 6 GPIOs programmable as inputs or outputs
      - 6 GPIOs with dedicated functions (LED/JTAG/clock) can also be
        used as general inputs or outputs
@@ -81,6 +90,7 @@
      - GPIO outputs can produce periodic signals
      - 1 interrupt pin
 
-   + Intel IXP465
+   * Intel IXP465
+
      - Auxiliary Slave/Master Mode Snapshot (optional interrupt)
      - Target Time (optional interrupt)
diff --git a/Documentation/networking/timestamping.txt b/Documentation/networking/timestamping.txt
index bbdaf8990031..8dd6333c3270 100644
--- a/Documentation/networking/timestamping.txt
+++ b/Documentation/networking/timestamping.txt
@@ -368,7 +368,7 @@ ts[1] used to hold hardware timestamps converted to system time.
 Instead, expose the hardware clock device on the NIC directly as
 a HW PTP clock source, to allow time conversion in userspace and
 optionally synchronize system time with a userspace PTP stack such
-as linuxptp. For the PTP clock API, see Documentation/ptp/ptp.txt.
+as linuxptp. For the PTP clock API, see Documentation/driver-api/ptp.rst.
 
 Note that if the SO_TIMESTAMP or SO_TIMESTAMPNS option is enabled
 together with SO_TIMESTAMPING using SOF_TIMESTAMPING_SOFTWARE, a false
diff --git a/MAINTAINERS b/MAINTAINERS
index be3d80397956..e4c26dc67668 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12649,7 +12649,7 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 W:	http://linuxptp.sourceforge.net/
 F:	Documentation/ABI/testing/sysfs-ptp
-F:	Documentation/ptp/*
+F:	Documentation/driver-api/ptp.rst
 F:	drivers/net/phy/dp83640*
 F:	drivers/ptp/*
 F:	include/linux/ptp_cl*
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 29/79] docs: riscv: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (26 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 28/79] docs: ptp.txt: convert to ReST and move to driver-api Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 30/79] docs: Debugging390.txt: convert table to ascii artwork Mauro Carvalho Chehab
                     ` (49 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Palmer Dabbelt, Albert Ou, linux-riscv

The conversion here is trivial:
 - Adjust the document title's markup
 - Do some whitespace alignment;
 - mark literal blocks;
 - Use ReST way to markup indented lists.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/riscv/index.rst            | 17 ++++
 Documentation/riscv/{pmu.txt => pmu.rst} | 98 +++++++++++++-----------
 2 files changed, 69 insertions(+), 46 deletions(-)
 create mode 100644 Documentation/riscv/index.rst
 rename Documentation/riscv/{pmu.txt => pmu.rst} (77%)

diff --git a/Documentation/riscv/index.rst b/Documentation/riscv/index.rst
new file mode 100644
index 000000000000..c4b906d9b5a7
--- /dev/null
+++ b/Documentation/riscv/index.rst
@@ -0,0 +1,17 @@
+:orphan:
+
+===================
+RISC-V architecture
+===================
+
+.. toctree::
+    :maxdepth: 1
+
+    pmu
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/riscv/pmu.txt b/Documentation/riscv/pmu.rst
similarity index 77%
rename from Documentation/riscv/pmu.txt
rename to Documentation/riscv/pmu.rst
index b29f03a6d82f..acb216b99c26 100644
--- a/Documentation/riscv/pmu.txt
+++ b/Documentation/riscv/pmu.rst
@@ -1,5 +1,7 @@
+===================================
 Supporting PMUs on RISC-V platforms
-==========================================
+===================================
+
 Alan Kao <alankao@andestech.com>, Mar 2018
 
 Introduction
@@ -77,13 +79,13 @@ Note that some features can be done in this stage as well:
 (2) privilege level setting (user space only, kernel space only, both);
 (3) destructor setting.  Normally it is sufficient to apply *riscv_destroy_event*;
 (4) tweaks for non-sampling events, which will be utilized by functions such as
-*perf_adjust_period*, usually something like the follows:
+    *perf_adjust_period*, usually something like the follows::
 
-if (!is_sampling_event(event)) {
-        hwc->sample_period = x86_pmu.max_period;
-        hwc->last_period = hwc->sample_period;
-        local64_set(&hwc->period_left, hwc->sample_period);
-}
+      if (!is_sampling_event(event)) {
+              hwc->sample_period = x86_pmu.max_period;
+              hwc->last_period = hwc->sample_period;
+              local64_set(&hwc->period_left, hwc->sample_period);
+      }
 
 In the case of *riscv_base_pmu*, only (3) is provided for now.
 
@@ -94,10 +96,10 @@ In the case of *riscv_base_pmu*, only (3) is provided for now.
 3.1. Interrupt Initialization
 
 This often occurs at the beginning of the *event_init* method. In common
-practice, this should be a code segment like
+practice, this should be a code segment like::
 
-int x86_reserve_hardware(void)
-{
+  int x86_reserve_hardware(void)
+  {
         int err = 0;
 
         if (!atomic_inc_not_zero(&pmc_refcount)) {
@@ -114,7 +116,7 @@ int x86_reserve_hardware(void)
         }
 
         return err;
-}
+  }
 
 And the magic is in *reserve_pmc_hardware*, which usually does atomic
 operations to make implemented IRQ accessible from some global function pointer.
@@ -128,28 +130,28 @@ which will be introduced in the next section.)
 
 3.2. IRQ Structure
 
-Basically, a IRQ runs the following pseudo code:
+Basically, a IRQ runs the following pseudo code::
 
-for each hardware counter that triggered this overflow
+  for each hardware counter that triggered this overflow
 
-    get the event of this counter
+      get the event of this counter
 
-    // following two steps are defined as *read()*,
-    // check the section Reading/Writing Counters for details.
-    count the delta value since previous interrupt
-    update the event->count (# event occurs) by adding delta, and
-               event->hw.period_left by subtracting delta
+      // following two steps are defined as *read()*,
+      // check the section Reading/Writing Counters for details.
+      count the delta value since previous interrupt
+      update the event->count (# event occurs) by adding delta, and
+                 event->hw.period_left by subtracting delta
 
-    if the event overflows
-        sample data
-        set the counter appropriately for the next overflow
+      if the event overflows
+          sample data
+          set the counter appropriately for the next overflow
 
-        if the event overflows again
-            too frequently, throttle this event
-        fi
-    fi
+          if the event overflows again
+              too frequently, throttle this event
+          fi
+      fi
 
-end for
+  end for
 
 However as of this writing, none of the RISC-V implementations have designed an
 interrupt for perf, so the details are to be completed in the future.
@@ -195,23 +197,26 @@ A normal flow of these state transitions are as follows:
   At this stage, a general event is bound to a physical counter, if any.
   The state changes to PERF_HES_STOPPED and PERF_HES_UPTODATE, because it is now
   stopped, and the (software) event count does not need updating.
-** *start* is then called, and the counter is enabled.
-   With flag PERF_EF_RELOAD, it writes an appropriate value to the counter (check
-   previous section for detail).
-   Nothing is written if the flag does not contain PERF_EF_RELOAD.
-   The state now is reset to none, because it is neither stopped nor updated
-   (the counting already started)
+
+  - *start* is then called, and the counter is enabled.
+    With flag PERF_EF_RELOAD, it writes an appropriate value to the counter (check
+    previous section for detail).
+    Nothing is written if the flag does not contain PERF_EF_RELOAD.
+    The state now is reset to none, because it is neither stopped nor updated
+    (the counting already started)
+
 * When being context-switched out, *del* is called.  It then checks out all the
   events in the PMU and calls *stop* to update their counts.
-** *stop* is called by *del*
-   and the perf core with flag PERF_EF_UPDATE, and it often shares the same
-   subroutine as *read* with the same logic.
-   The state changes to PERF_HES_STOPPED and PERF_HES_UPTODATE, again.
 
-** Life cycle of these two pairs: *add* and *del* are called repeatedly as
-  tasks switch in-and-out; *start* and *stop* is also called when the perf core
-  needs a quick stop-and-start, for instance, when the interrupt period is being
-  adjusted.
+  - *stop* is called by *del*
+    and the perf core with flag PERF_EF_UPDATE, and it often shares the same
+    subroutine as *read* with the same logic.
+    The state changes to PERF_HES_STOPPED and PERF_HES_UPTODATE, again.
+
+  - Life cycle of these two pairs: *add* and *del* are called repeatedly as
+    tasks switch in-and-out; *start* and *stop* is also called when the perf core
+    needs a quick stop-and-start, for instance, when the interrupt period is being
+    adjusted.
 
 Current implementation is sufficient for now and can be easily extended to
 features in the future.
@@ -225,25 +230,26 @@ A. Related Structures
   Both structures are designed to be read-only.
 
   *struct pmu* defines some function pointer interfaces, and most of them take
-*struct perf_event* as a main argument, dealing with perf events according to
-perf's internal state machine (check kernel/events/core.c for details).
+  *struct perf_event* as a main argument, dealing with perf events according to
+  perf's internal state machine (check kernel/events/core.c for details).
 
   *struct riscv_pmu* defines PMU-specific parameters.  The naming follows the
-convention of all other architectures.
+  convention of all other architectures.
 
 * struct perf_event: include/linux/perf_event.h
 * struct hw_perf_event
 
   The generic structure that represents perf events, and the hardware-related
-details.
+  details.
 
 * struct riscv_hw_events: arch/riscv/include/asm/perf_event.h
 
   The structure that holds the status of events, has two fixed members:
-the number of events and the array of the events.
+  the number of events and the array of the events.
 
 References
 ----------
 
 [1] https://github.com/riscv/riscv-linux/pull/124
+
 [2] https://groups.google.com/a/groups.riscv.org/forum/#!topic/sw-dev/f19TmCNP6yA
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 30/79] docs: Debugging390.txt: convert table to ascii artwork
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (27 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 29/79] docs: riscv: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 31/79] docs: s390: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
                     ` (48 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Martin Schwidefsky, Heiko Carstens, linux-s390

The first bit/value table inside the document is very
hard to read and won't fit ReST format. Also, some columns aren't
properly aligned.

Convert it to a nice ascii artwork table with makes it easier to
read as plain text and is compatible with ReST format parser
on Sphinx.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/s390/Debugging390.txt | 210 ++++++++++++++++------------
 1 file changed, 120 insertions(+), 90 deletions(-)

diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt
index 5ae7f868a007..c35804c238ad 100644
--- a/Documentation/s390/Debugging390.txt
+++ b/Documentation/s390/Debugging390.txt
@@ -78,96 +78,126 @@ e.g. switching address translation off requires that you
 have a logical=physical mapping for the address you are
 currently running at.
 
-      Bit           Value
-s/390 z/Architecture
-0       0     Reserved ( must be 0 ) otherwise specification exception occurs.
-
-1       1     Program Event Recording 1 PER enabled, 
-	      PER is used to facilitate debugging e.g. single stepping.
-
-2-4    2-4    Reserved ( must be 0 ). 
-
-5       5     Dynamic address translation 1=DAT on.
-
-6       6     Input/Output interrupt Mask
-
-7	7     External interrupt Mask used primarily for interprocessor
-	      signalling and clock interrupts.
-
-8-11  8-11    PSW Key used for complex memory protection mechanism
-	      (not used under linux)
-
-12      12    1 on s/390 0 on z/Architecture
-
-13      13    Machine Check Mask 1=enable machine check interrupts
-
-14	14    Wait State. Set this to 1 to stop the processor except for
-	      interrupts and give  time to other LPARS. Used in CPU idle in
-	      the kernel to increase overall usage of processor resources.
-
-15      15    Problem state ( if set to 1 certain instructions are disabled )
-	      all linux user programs run with this bit 1 
-	      ( useful info for debugging under VM ).
-
-16-17 16-17   Address Space Control
-
-	      00 Primary Space Mode:
-	      The register CR1 contains the primary address-space control ele-
-	      ment (PASCE), which points to the primary space region/segment
-	      table origin.
-
-	      01 Access register mode
-
-	      10 Secondary Space Mode:
-	      The register CR7 contains the secondary address-space control
-	      element (SASCE), which points to the secondary space region or
-	      segment table origin.
-
-	      11 Home Space Mode:
-	      The register CR13 contains the home space address-space control
-	      element (HASCE), which points to the home space region/segment
-	      table origin.
-
-	      See "Address Spaces on Linux for s/390 & z/Architecture" below
-	      for more information about address space usage in Linux.
-
-18-19 18-19   Condition codes (CC)
-
-20    20      Fixed point overflow mask if 1=FPU exceptions for this event 
-              occur ( normally 0 ) 
-
-21    21      Decimal overflow mask if 1=FPU exceptions for this event occur 
-              ( normally 0 )
-
-22    22      Exponent underflow mask if 1=FPU exceptions for this event occur 
-              ( normally 0 )
-
-23    23      Significance Mask if 1=FPU exceptions for this event occur 
-              ( normally 0 )
-
-24-31 24-30   Reserved Must be 0.
-
-      31      Extended Addressing Mode
-      32      Basic Addressing Mode
-              Used to set addressing mode
-	      PSW 31   PSW 32
-                0         0        24 bit
-                0         1        31 bit
-                1         1        64 bit
-
-32             1=31 bit addressing mode 0=24 bit addressing mode (for backward 
-               compatibility), linux always runs with this bit set to 1
-
-33-64          Instruction address.
-      33-63    Reserved must be 0
-      64-127   Address
-               In 24 bits mode bits 64-103=0 bits 104-127 Address 
-               In 31 bits mode bits 64-96=0 bits 97-127 Address
-               Note: unlike 31 bit mode on s/390 bit 96 must be zero
-	       when loading the address with LPSWE otherwise a 
-               specification exception occurs, LPSW is fully backward
-               compatible.
-
++-------------------------+-------------------------------------------------+
+|          Bit            |                                                 |
++--------+----------------+                     Value                       |
+| s/390  | z/Architecture |                                                 |
++========+================+=================================================+
+| 0      |     0          | Reserved (must be 0) otherwise specification    |
+|        |                | exception occurs.                               |
++--------+----------------+-------------------------------------------------+
+| 1      |     1          | Program Event Recording 1 PER enabled,          |
+|        |                | PER is used to facilitate debugging e.g.        |
+|        |                | single stepping.                                |
++--------+----------------+-------------------------------------------------+
+| 2-4    |    2-4         | Reserved (must be 0).                           |
++--------+----------------+-------------------------------------------------+
+| 5      |     5          | Dynamic address translation 1=DAT on.           |
++--------+----------------+-------------------------------------------------+
+| 6      |     6          | Input/Output interrupt Mask                     |
++--------+----------------+-------------------------------------------------+
+| 7      |     7          | External interrupt Mask used primarily for      |
+|        |                | interprocessor signalling and clock interrupts. |
++--------+----------------+-------------------------------------------------+
+| 8-11   |   8-11         | PSW Key used for complex memory protection      |
+|        |                | mechanism (not used under linux)                |
++--------+----------------+-------------------------------------------------+
+| 12     |     12         | 1 on s/390 0 on z/Architecture                  |
++--------+----------------+-------------------------------------------------+
+| 13     |     13         | Machine Check Mask 1=enable machine check       |
+|        |                | interrupts                                      |
++--------+----------------+-------------------------------------------------+
+| 14     |     14         | Wait State. Set this to 1 to stop the processor |
+|        |                | except for interrupts and give  time to other   |
+|        |                | LPARS. Used in CPU idle in the kernel to        |
+|        |                | increase overall usage of processor resources.  |
++--------+----------------+-------------------------------------------------+
+| 15     |     15         | Problem state (if set to 1 certain instructions |
+|        |                | are disabled). All linux user programs run with |
+|        |                | this bit 1 (useful info for debugging under VM).|
++--------+----------------+-------------------------------------------------+
+| 16-17  |    16-17       | Address Space Control                           |
+|        |                |                                                 |
+|        |                | 00 Primary Space Mode:                          |
+|        |                |                                                 |
+|        |                | The register CR1 contains the primary           |
+|        |                | address-space control element (PASCE), which    |
+|        |                | points to the primary space region/segment      |
+|        |                | table origin.                                   |
+|        |                |                                                 |
+|        |                | 01 Access register mode                         |
+|        |                |                                                 |
+|        |                | 10 Secondary Space Mode:                        |
+|        |                |                                                 |
+|        |                | The register CR7 contains the secondary         |
+|        |                | address-space control element (SASCE), which    |
+|        |                | points to the secondary space region or         |
+|        |                | segment table origin.                           |
+|        |                |                                                 |
+|        |                | 11 Home Space Mode:                             |
+|        |                |                                                 |
+|        |                | The register CR13 contains the home space       |
+|        |                | address-space control element (HASCE), which    |
+|        |                | points to the home space region/segment         |
+|        |                | table origin.                                   |
+|        |                |                                                 |
+|        |                | See "Address Spaces on Linux for s/390 &        |
+|        |                | z/Architecture" below for more information      |
+|        |                | about address space usage in Linux.             |
++--------+----------------+-------------------------------------------------+
+| 18-19  |    18-19       | Condition codes (CC)                            |
++--------+----------------+-------------------------------------------------+
+| 20     |    20          | Fixed point overflow mask if 1=FPU exceptions   |
+|        |                | for this event occur (normally 0)               |
++--------+----------------+-------------------------------------------------+
+| 21     |    21          | Decimal overflow mask if 1=FPU exceptions for   |
+|        |                | this event occur (normally 0)                   |
++--------+----------------+-------------------------------------------------+
+| 22     |    22          | Exponent underflow mask if 1=FPU exceptions     |
+|        |                | for this event occur (normally 0)               |
++--------+----------------+-------------------------------------------------+
+| 23     |    23          | Significance Mask if 1=FPU exceptions for this  |
+|        |                | event occur (normally 0)                        |
++--------+----------------+-------------------------------------------------+
+| 24-31  |    24-30       | Reserved Must be 0.                             |
+|        +----------------+-------------------------------------------------+
+|        |    31          | Extended Addressing Mode                        |
+|        +----------------+-------------------------------------------------+
+|        |    32          | Basic Addressing Mode                           |
+|        |                |                                                 |
+|        |                | Used to set addressing mode                     |
+|        |                |                                                 |
+|        |                |    +---------+----------+----------+            |
+|        |                |    | PSW 31  | PSW 32   |          |            |
+|        |                |    +---------+----------+----------+            |
+|        |                |    |   0     |    0     |  24 bit  |            |
+|        |                |    +---------+----------+----------+            |
+|        |                |    |   0     |    1     |  31 bit  |            |
+|        |                |    +---------+----------+----------+            |
+|        |                |    |   1     |    1     |  64 bit  |            |
+|        |                |    +---------+----------+----------+            |
++--------+----------------+-------------------------------------------------+
+| 32     |                | 1=31 bit addressing mode 0=24 bit addressing    |
+|        |                | mode (for backward compatibility), linux        |
+|        |                | always runs with this bit set to 1              |
++--------+----------------+-------------------------------------------------+
+| 33-64  |                | Instruction address.                            |
+|        +----------------+-------------------------------------------------+
+|        |    33-63       | Reserved must be 0                              |
+|        +----------------+-------------------------------------------------+
+|        |    64-127      | Address                                         |
+|        |                |                                                 |
+|        |                |   - In 24 bits mode bits 64-103=0 bits 104-127  |
+|        |                |     Address                                     |
+|        |                |   - In 31 bits mode bits 64-96=0 bits 97-127    |
+|        |                |     Address                                     |
+|        |                |                                                 |
+|        |                | Note:                                           |
+|        |                |     unlike 31 bit mode on s/390 bit 96 must be  |
+|        |                |     zero when loading the address with LPSWE    |
+|        |                |     otherwise a specification exception occurs, |
+|        |                |     LPSW is fully backward compatible.          |
++--------+----------------+-------------------------------------------------+
 
 Prefix Page(s)
 --------------
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 31/79] docs: s390: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (28 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 30/79] docs: Debugging390.txt: convert table to ascii artwork Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-23 16:12     ` Farhan Ali
  2019-04-24 11:41     ` Cornelia Huck
  2019-04-22 13:27   ` [PATCH v2 32/79] s390: include/asm/debug.h add kerneldoc markups Mauro Carvalho Chehab
                     ` (47 subsequent siblings)
  77 siblings, 2 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Martin Schwidefsky, Heiko Carstens,
	Tony Krowiak, Pierre Morel, Halil Pasic, Cornelia Huck,
	Farhan Ali, Eric Farman, linux-s390, kvm

Convert all text files with s390 documentation to ReST format.

Tried to preserve as much as possible the original document
format. Still, some of the files required some work in order
for it to be visible on both plain text and after converted
to html.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../admin-guide/kernel-parameters.txt         |    4 +-
 Documentation/driver-api/s390-drivers.rst     |    4 +-
 Documentation/s390/{3270.txt => 3270.rst}     |   85 +-
 Documentation/s390/{cds.txt => cds.rst}       |  354 ++-
 .../s390/{CommonIO => common_io.rst}          |   49 +-
 Documentation/s390/{DASD => dasd.rst}         |   33 +-
 .../{Debugging390.txt => debugging390.rst}    | 2389 ++++++++++-------
 .../{driver-model.txt => driver-model.rst}    |  179 +-
 Documentation/s390/index.rst                  |   30 +
 .../s390/{monreader.txt => monreader.rst}     |   85 +-
 Documentation/s390/{qeth.txt => qeth.rst}     |   36 +-
 Documentation/s390/s390dbf.rst                |  803 ++++++
 Documentation/s390/s390dbf.txt                |  667 -----
 Documentation/s390/text_files.rst             |   11 +
 .../s390/{vfio-ap.txt => vfio-ap.rst}         |  487 ++--
 .../s390/{vfio-ccw.txt => vfio-ccw.rst}       |   90 +-
 .../s390/{zfcpdump.txt => zfcpdump.rst}       |    2 +
 MAINTAINERS                                   |    4 +-
 arch/s390/Kconfig                             |    4 +-
 arch/s390/include/asm/debug.h                 |    4 +-
 drivers/s390/char/zcore.c                     |    2 +-
 21 files changed, 3089 insertions(+), 2233 deletions(-)
 rename Documentation/s390/{3270.txt => 3270.rst} (90%)
 rename Documentation/s390/{cds.txt => cds.rst} (64%)
 rename Documentation/s390/{CommonIO => common_io.rst} (87%)
 rename Documentation/s390/{DASD => dasd.rst} (92%)
 rename Documentation/s390/{Debugging390.txt => debugging390.rst} (53%)
 rename Documentation/s390/{driver-model.txt => driver-model.rst} (73%)
 create mode 100644 Documentation/s390/index.rst
 rename Documentation/s390/{monreader.txt => monreader.rst} (81%)
 rename Documentation/s390/{qeth.txt => qeth.rst} (62%)
 create mode 100644 Documentation/s390/s390dbf.rst
 delete mode 100644 Documentation/s390/s390dbf.txt
 create mode 100644 Documentation/s390/text_files.rst
 rename Documentation/s390/{vfio-ap.txt => vfio-ap.rst} (72%)
 rename Documentation/s390/{vfio-ccw.txt => vfio-ccw.rst} (89%)
 rename Documentation/s390/{zfcpdump.txt => zfcpdump.rst} (97%)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index fdc04f23d093..97ec048f68af 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -478,7 +478,7 @@
 			others).
 
 	ccw_timeout_log	[S390]
-			See Documentation/s390/CommonIO for details.
+			See Documentation/s390/common_io.rst for details.
 
 	cgroup_disable=	[KNL] Disable a particular controller
 			Format: {name of the controller(s) to disable}
@@ -516,7 +516,7 @@
 				/selinux/checkreqprot.
 
 	cio_ignore=	[S390]
-			See Documentation/s390/CommonIO for details.
+			See Documentation/s390/common_io.rst for details.
 	clk_ignore_unused
 			[CLK]
 			Prevents the clock framework from automatically gating
diff --git a/Documentation/driver-api/s390-drivers.rst b/Documentation/driver-api/s390-drivers.rst
index 30e6aa7e160b..5158577bc29b 100644
--- a/Documentation/driver-api/s390-drivers.rst
+++ b/Documentation/driver-api/s390-drivers.rst
@@ -27,7 +27,7 @@ not strictly considered I/O devices. They are considered here as well,
 although they are not the focus of this document.
 
 Some additional information can also be found in the kernel source under
-Documentation/s390/driver-model.txt.
+Documentation/s390/driver-model.rst.
 
 The css bus
 ===========
@@ -38,7 +38,7 @@ into several categories:
 * Standard I/O subchannels, for use by the system. They have a child
   device on the ccw bus and are described below.
 * I/O subchannels bound to the vfio-ccw driver. See
-  Documentation/s390/vfio-ccw.txt.
+  Documentation/s390/vfio-ccw.rst.
 * Message subchannels. No Linux driver currently exists.
 * CHSC subchannels (at most one). The chsc subchannel driver can be used
   to send asynchronous chsc commands.
diff --git a/Documentation/s390/3270.txt b/Documentation/s390/3270.rst
similarity index 90%
rename from Documentation/s390/3270.txt
rename to Documentation/s390/3270.rst
index 7c715de99774..e09e77954238 100644
--- a/Documentation/s390/3270.txt
+++ b/Documentation/s390/3270.rst
@@ -1,13 +1,17 @@
+===============================
 IBM 3270 Display System support
+===============================
 
 This file describes the driver that supports local channel attachment
 of IBM 3270 devices.  It consists of three sections:
+
 	* Introduction
 	* Installation
 	* Operation
 
 
-INTRODUCTION.
+Introduction
+============
 
 This paper describes installing and operating 3270 devices under
 Linux/390.  A 3270 device is a block-mode rows-and-columns terminal of
@@ -17,12 +21,12 @@ twenty and thirty years ago.
 You may have 3270s in-house and not know it.  If you're using the
 VM-ESA operating system, define a 3270 to your virtual machine by using
 the command "DEF GRAF <hex-address>"  This paper presumes you will be
-defining four 3270s with the CP/CMS commands
+defining four 3270s with the CP/CMS commands:
 
-	DEF GRAF 620
-	DEF GRAF 621
-	DEF GRAF 622
-	DEF GRAF 623
+	- DEF GRAF 620
+	- DEF GRAF 621
+	- DEF GRAF 622
+	- DEF GRAF 623
 
 Your network connection from VM-ESA allows you to use x3270, tn3270, or
 another 3270 emulator, started from an xterm window on your PC or
@@ -34,7 +38,8 @@ This paper covers installation of the driver and operation of a
 dialed-in x3270.
 
 
-INSTALLATION.
+Installation
+============
 
 You install the driver by installing a patch, doing a kernel build, and
 running the configuration script (config3270.sh, in this directory).
@@ -59,13 +64,15 @@ Use #CP TERM CONMODE 3270 to change it to 3270.  If you generate only
 at boot time to a 3270 if it is a 3215.
 
 In brief, these are the steps:
+
 	1. Install the tub3270 patch
-	2. (If a module) add a line to a file in /etc/modprobe.d/*.conf
+	2. (If a module) add a line to a file in `/etc/modprobe.d/*.conf`
 	3. (If VM) define devices with DEF GRAF
 	4. Reboot
 	5. Configure
 
 To test that everything works, assuming VM and x3270,
+
 	1. Bring up an x3270 window.
 	2. Use the DIAL command in that window.
 	3. You should immediately see a Linux login screen.
@@ -74,7 +81,8 @@ Here are the installation steps in detail:
 
 	1.  The 3270 driver is a part of the official Linux kernel
 	source.  Build a tree with the kernel source and any necessary
-	patches.  Then do
+	patches.  Then do::
+
 		make oldconfig
 		(If you wish to disable 3215 console support, edit
 		.config; change CONFIG_TN3215's value to "n";
@@ -84,20 +92,22 @@ Here are the installation steps in detail:
 		make modules_install
 
 	2. (Perform this step only if you have configured tub3270 as a
-	module.)  Add a line to a file /etc/modprobe.d/*.conf to automatically
+	module.)  Add a line to a file `/etc/modprobe.d/*.conf` to automatically
 	load the driver when it's needed.  With this line added, you will see
 	login prompts appear on your 3270s as soon as boot is complete (or
 	with emulated 3270s, as soon as you dial into your vm guest using the
 	command "DIAL <vmguestname>").  Since the line-mode major number is
-	227, the line to add should be:
+	227, the line to add should be::
+
 		alias char-major-227 tub3270
 
 	3. Define graphic devices to your vm guest machine, if you
 	haven't already.  Define them before you reboot (reipl):
-		DEFINE GRAF 620
-		DEFINE GRAF 621
-		DEFINE GRAF 622
-		DEFINE GRAF 623
+
+		- DEFINE GRAF 620
+		- DEFINE GRAF 621
+		- DEFINE GRAF 622
+		- DEFINE GRAF 623
 
 	4. Reboot.  The reboot process scans hardware devices, including
 	3270s, and this enables the tub3270 driver once loaded to respond
@@ -107,21 +117,23 @@ Here are the installation steps in detail:
 
 	5. Run the 3270 configuration script config3270.  It is
 	distributed in this same directory, Documentation/s390, as
-	config3270.sh.	Inspect the output script it produces,
+	config3270.sh.  Inspect the output script it produces,
 	/tmp/mkdev3270, and then run that script.  This will create the
 	necessary character special device files and make the necessary
 	changes to /etc/inittab.
 
 	Then notify /sbin/init that /etc/inittab has changed, by issuing
-	the telinit command with the q operand:
+	the telinit command with the q operand::
+
 		cd Documentation/s390
 		sh config3270.sh
 		sh /tmp/mkdev3270
 		telinit q
 
-	This should be sufficient for your first time.	If your 3270
+	This should be sufficient for your first time.  If your 3270
 	configuration has changed and you're reusing config3270, you
-	should follow these steps:
+	should follow these steps::
+
 		Change 3270 configuration
 		Reboot
 		Run config3270 and /tmp/mkdev3270
@@ -132,8 +144,10 @@ Here are the testing steps in detail:
 	1. Bring up an x3270 window, or use an actual hardware 3278 or
 	3279, or use the 3270 emulator of your choice.  You would be
 	running the emulator on your PC or workstation.  You would use
-	the command, for example,
+	the command, for example::
+
 		x3270 vm-esa-domain-name &
+
 	if you wanted a 3278 Model 4 with 43 rows of 80 columns, the
 	default model number.  The driver does not take advantage of
 	extended attributes.
@@ -144,7 +158,8 @@ Here are the testing steps in detail:
 
 	2. Use the DIAL command instead of the LOGIN command to connect
 	to one of the virtual 3270s you defined with the DEF GRAF
-	commands:
+	commands::
+
 		dial my-vm-guest-name
 
 	3. You should immediately see a login prompt from your
@@ -171,14 +186,17 @@ Here are the testing steps in detail:
 	Wrong major number?  Wrong minor number?  There's your
 	problem!
 
-	D. Do you get the message
+	D. Do you get the message::
+
 		 "HCPDIA047E my-vm-guest-name 0620 does not exist"?
+
 	If so, you must issue the command "DEF GRAF 620" from your VM
 	3215 console and then reboot the system.
 
 
 
 OPERATION.
+==========
 
 The driver defines three areas on the 3270 screen:  the log area, the
 input area, and the status area.
@@ -203,8 +221,10 @@ which indicates no scrolling will occur.  (If you hit ENTER with "Linux
 Running" and nothing typed, the application receives a newline.)
 
 You may change the scrolling timeout value.  For example, the following
-command line:
+command line::
+
 	echo scrolltime=60 > /proc/tty/driver/tty3270
+
 changes the scrolling timeout value to 60 sec.  Set scrolltime to 0 if
 you wish to prevent scrolling entirely.
 
@@ -228,7 +248,8 @@ cause an EOF also by typing "^D" and hitting ENTER.
 No PF key is preassigned to cause a job suspension, but you may cause a
 job suspension by typing "^Z" and hitting ENTER.  You may wish to
 assign this function to a PF key.  To make PF7 cause job suspension,
-execute the command:
+execute the command::
+
 	echo pf7=^z > /proc/tty/driver/tty3270
 
 If the input you type does not end with the two characters "^n", the
@@ -243,8 +264,10 @@ command is entered into the stack only when the input area is not made
 invisible (such as for password entry) and it is not identical to the
 current top entry.  PF10 rotates backward through the command stack;
 PF11 rotates forward.  You may assign the backward function to any PF
-key (or PA key, for that matter), say, PA3, with the command:
+key (or PA key, for that matter), say, PA3, with the command::
+
 	echo -e pa3=\\033k > /proc/tty/driver/tty3270
+
 This assigns the string ESC-k to PA3.  Similarly, the string ESC-j
 performs the forward function.  (Rationale:  In bash with vi-mode line
 editing, ESC-k and ESC-j retrieve backward and forward history.
@@ -252,15 +275,19 @@ Suggestions welcome.)
 
 Is a stack size of twenty commands not to your liking?  Change it on
 the fly.  To change to saving the last 100 commands, execute the
-command:
+command::
+
 	echo recallsize=100 > /proc/tty/driver/tty3270
 
 Have a command you issue frequently?  Assign it to a PF or PA key!  Use
-the command
-	echo pf24="mkdir foobar; cd foobar" > /proc/tty/driver/tty3270 
+the command::
+
+	echo pf24="mkdir foobar; cd foobar" > /proc/tty/driver/tty3270
+
 to execute the commands mkdir foobar and cd foobar immediately when you
 hit PF24.  Want to see the command line first, before you execute it?
-Use the -n option of the echo command:
+Use the -n option of the echo command::
+
 	echo -n pf24="mkdir foo; cd foo" > /proc/tty/driver/tty3270
 
 
diff --git a/Documentation/s390/cds.txt b/Documentation/s390/cds.rst
similarity index 64%
rename from Documentation/s390/cds.txt
rename to Documentation/s390/cds.rst
index 480a78ef5a1e..7006d8209d2e 100644
--- a/Documentation/s390/cds.txt
+++ b/Documentation/s390/cds.rst
@@ -1,14 +1,18 @@
+===========================
 Linux for S/390 and zSeries
+===========================
 
 Common Device Support (CDS)
 Device Driver I/O Support Routines
 
-Authors : Ingo Adlung
-	  Cornelia Huck
+Authors:
+	- Ingo Adlung
+	- Cornelia Huck
 
 Copyright, IBM Corp. 1999-2002
 
 Introduction
+============
 
 This document describes the common device support routines for Linux/390.
 Different than other hardware architectures, ESA/390 has defined a unified
@@ -27,18 +31,20 @@ Operation manual (IBM Form. No. SA22-7201).
 
 In order to build common device support for ESA/390 I/O interfaces, a
 functional layer was introduced that provides generic I/O access methods to
-the hardware. 
+the hardware.
 
-The common device support layer comprises the I/O support routines defined 
-below. Some of them implement common Linux device driver interfaces, while 
+The common device support layer comprises the I/O support routines defined
+below. Some of them implement common Linux device driver interfaces, while
 some of them are ESA/390 platform specific.
 
 Note:
-In order to write a driver for S/390, you also need to look into the interface
-described in Documentation/s390/driver-model.txt.
+  In order to write a driver for S/390, you also need to look into the interface
+  described in Documentation/s390/driver-model.rst.
 
 Note for porting drivers from 2.4:
+
 The major changes are:
+
 * The functions use a ccw_device instead of an irq (subchannel).
 * All drivers must define a ccw_driver (see driver-model.txt) and the associated
   functions.
@@ -57,19 +63,16 @@ The major changes are:
 ccw_device_get_ciw()
    get commands from extended sense data.
 
-ccw_device_start()	
-ccw_device_start_timeout()
-ccw_device_start_key()
-ccw_device_start_key_timeout()
+ccw_device_start(), ccw_device_start_timeout(), ccw_device_start_key(), ccw_device_start_key_timeout()
    initiate an I/O request.
 
 ccw_device_resume()
    resume channel program execution.
 
-ccw_device_halt()	
+ccw_device_halt()
    terminate the current I/O request processed on the device.
 
-do_IRQ()	
+do_IRQ()
    generic interrupt routine. This function is called by the interrupt entry
    routine whenever an I/O interrupt is presented to the system. The do_IRQ()
    routine determines the interrupt status and calls the device specific
@@ -82,12 +85,15 @@ first level interrupt handler only and does not comprise a device driver
 callable interface. Instead, the functional description of do_IO() also
 describes the input to the device specific interrupt handler.
 
-Note: All explanations apply also to the 64 bit architecture s390x.
+Note:
+	All explanations apply also to the 64 bit architecture s390x.
 
 
 Common Device Support (CDS) for Linux/390 Device Drivers
+========================================================
 
 General Information
+-------------------
 
 The following chapters describe the I/O related interface routines the
 Linux/390 common device support (CDS) provides to allow for device specific
@@ -101,6 +107,7 @@ can be found in the architecture specific C header file
 linux/arch/s390/include/asm/irq.h.
 
 Overview of CDS interface concepts
+----------------------------------
 
 Different to other hardware platforms, the ESA/390 architecture doesn't define
 interrupt lines managed by a specific interrupt controller and bus systems
@@ -126,7 +133,7 @@ has to call every single device driver registered on this IRQ in order to
 determine the device driver owning the device that raised the interrupt.
 
 Up to kernel 2.4, Linux/390 used to provide interfaces via the IRQ (subchannel).
-For internal use of the common I/O layer, these are still there. However, 
+For internal use of the common I/O layer, these are still there. However,
 device drivers should use the new calling interface via the ccw_device only.
 
 During its startup the Linux/390 system checks for peripheral devices. Each
@@ -134,7 +141,7 @@ of those devices is uniquely defined by a so called subchannel by the ESA/390
 channel subsystem. While the subchannel numbers are system generated, each
 subchannel also takes a user defined attribute, the so called device number.
 Both subchannel number and device number cannot exceed 65535. During sysfs
-initialisation, the information about control unit type and device types that 
+initialisation, the information about control unit type and device types that
 imply specific I/O commands (channel command words - CCWs) in order to operate
 the device are gathered. Device drivers can retrieve this set of hardware
 information during their initialization step to recognize the devices they
@@ -164,18 +171,26 @@ get_ciw() - get command information word
 This call enables a device driver to get information about supported commands
 from the extended SenseID data.
 
-struct ciw *
-ccw_device_get_ciw(struct ccw_device *cdev, __u32 cmd);
+::
 
-cdev - The ccw_device for which the command is to be retrieved.
-cmd  - The command type to be retrieved.
+  struct ciw *
+  ccw_device_get_ciw(struct ccw_device *cdev, __u32 cmd);
+
+====  ========================================================
+cdev  The ccw_device for which the command is to be retrieved.
+cmd   The command type to be retrieved.
+====  ========================================================
 
 ccw_device_get_ciw() returns:
-NULL    - No extended data available, invalid device or command not found.
-!NULL   - The command requested.
 
+=====  ================================================================
+ NULL  No extended data available, invalid device or command not found.
+!NULL  The command requested.
+=====  ================================================================
 
-ccw_device_start() - Initiate I/O Request
+::
+
+  ccw_device_start() - Initiate I/O Request
 
 The ccw_device_start() routines is the I/O request front-end processor. All
 device driver I/O requests must be issued using this routine. A device driver
@@ -186,93 +201,105 @@ This description also covers the status information passed to the device
 driver's interrupt handler as this is related to the rules (flags) defined
 with the associated I/O request when calling ccw_device_start().
 
-int ccw_device_start(struct ccw_device *cdev,
-		     struct ccw1 *cpa,
-		     unsigned long intparm,
-		     __u8 lpm,
-		     unsigned long flags);
-int ccw_device_start_timeout(struct ccw_device *cdev,
-			     struct ccw1 *cpa,
-			     unsigned long intparm,
-			     __u8 lpm,
-			     unsigned long flags,
-			     int expires);
-int ccw_device_start_key(struct ccw_device *cdev,
-			 struct ccw1 *cpa,
-			 unsigned long intparm,
-			 __u8 lpm,
-			 __u8 key,
-			 unsigned long flags);
-int ccw_device_start_key_timeout(struct ccw_device *cdev,
-				 struct ccw1 *cpa,
-				 unsigned long intparm,
-				 __u8 lpm,
-				 __u8 key,
-				 unsigned long flags,
-				 int expires);
+::
 
-cdev         : ccw_device the I/O is destined for
-cpa          : logical start address of channel program
-user_intparm : user specific interrupt information; will be presented
-	       back to the device driver's interrupt handler. Allows a
-               device driver to associate the interrupt with a
-               particular I/O request.
-lpm          : defines the channel path to be used for a specific I/O
-               request. A value of 0 will make cio use the opm.
-key	     : the storage key to use for the I/O (useful for operating on a
-	       storage with a storage key != default key)
-flag         : defines the action to be performed for I/O processing
-expires      : timeout value in jiffies. The common I/O layer will terminate
-	       the running program after this and call the interrupt handler
-	       with ERR_PTR(-ETIMEDOUT) as irb.
+  int ccw_device_start(struct ccw_device *cdev,
+		       struct ccw1 *cpa,
+		       unsigned long intparm,
+		       __u8 lpm,
+		       unsigned long flags);
+  int ccw_device_start_timeout(struct ccw_device *cdev,
+			       struct ccw1 *cpa,
+			       unsigned long intparm,
+			       __u8 lpm,
+			       unsigned long flags,
+			       int expires);
+  int ccw_device_start_key(struct ccw_device *cdev,
+			   struct ccw1 *cpa,
+			   unsigned long intparm,
+			   __u8 lpm,
+			   __u8 key,
+			   unsigned long flags);
+  int ccw_device_start_key_timeout(struct ccw_device *cdev,
+				   struct ccw1 *cpa,
+				   unsigned long intparm,
+				   __u8 lpm,
+				   __u8 key,
+				   unsigned long flags,
+				   int expires);
 
-Possible flag values are :
+============= =============================================================
+cdev          ccw_device the I/O is destined for
+cpa           logical start address of channel program
+user_intparm  user specific interrupt information; will be presented
+	      back to the device driver's interrupt handler. Allows a
+	      device driver to associate the interrupt with a
+	      particular I/O request.
+lpm           defines the channel path to be used for a specific I/O
+	      request. A value of 0 will make cio use the opm.
+key           the storage key to use for the I/O (useful for operating on a
+	      storage with a storage key != default key)
+flag          defines the action to be performed for I/O processing
+expires       timeout value in jiffies. The common I/O layer will terminate
+	      the running program after this and call the interrupt handler
+	      with ERR_PTR(-ETIMEDOUT) as irb.
+============= =============================================================
 
-DOIO_ALLOW_SUSPEND       - channel program may become suspended
-DOIO_DENY_PREFETCH       - don't allow for CCW prefetch; usually
-                           this implies the channel program might
-                           become modified
-DOIO_SUPPRESS_INTER     - don't call the handler on intermediate status
+Possible flag values are:
 
-The cpa parameter points to the first format 1 CCW of a channel program :
+========================= =============================================
+DOIO_ALLOW_SUSPEND        channel program may become suspended
+DOIO_DENY_PREFETCH        don't allow for CCW prefetch; usually
+			  this implies the channel program might
+			  become modified
+DOIO_SUPPRESS_INTER       don't call the handler on intermediate status
+========================= =============================================
 
-struct ccw1 {
-      __u8  cmd_code;/* command code */
-      __u8  flags;   /* flags, like IDA addressing, etc. */
-      __u16 count;   /* byte count */
-      __u32 cda;     /* data address */
-} __attribute__ ((packed,aligned(8)));
+The cpa parameter points to the first format 1 CCW of a channel program::
 
-with the following CCW flags values defined :
+  struct ccw1 {
+	__u8  cmd_code;/* command code */
+	__u8  flags;   /* flags, like IDA addressing, etc. */
+	__u16 count;   /* byte count */
+	__u32 cda;     /* data address */
+  } __attribute__ ((packed,aligned(8)));
 
-CCW_FLAG_DC        - data chaining
-CCW_FLAG_CC        - command chaining
-CCW_FLAG_SLI       - suppress incorrect length
-CCW_FLAG_SKIP      - skip
-CCW_FLAG_PCI       - PCI
-CCW_FLAG_IDA       - indirect addressing
-CCW_FLAG_SUSPEND   - suspend
+with the following CCW flags values defined:
+
+=================== =========================
+CCW_FLAG_DC         data chaining
+CCW_FLAG_CC         command chaining
+CCW_FLAG_SLI        suppress incorrect length
+CCW_FLAG_SKIP       skip
+CCW_FLAG_PCI        PCI
+CCW_FLAG_IDA        indirect addressing
+CCW_FLAG_SUSPEND    suspend
+=================== =========================
 
 
 Via ccw_device_set_options(), the device driver may specify the following
 options for the device:
 
-DOIO_EARLY_NOTIFICATION  - allow for early interrupt notification
-DOIO_REPORT_ALL          - report all interrupt conditions
+========================= ======================================
+DOIO_EARLY_NOTIFICATION   allow for early interrupt notification
+DOIO_REPORT_ALL           report all interrupt conditions
+========================= ======================================
 
 
-The ccw_device_start() function returns :
+The ccw_device_start() function returns:
 
-      0 - successful completion or request successfully initiated
--EBUSY	- The device is currently processing a previous I/O request, or there is
-          a status pending at the device.
--ENODEV - cdev is invalid, the device is not operational or the ccw_device is
-          not online.
+======== ======================================================================
+      0  successful completion or request successfully initiated
+ -EBUSY  The device is currently processing a previous I/O request, or there is
+	 a status pending at the device.
+-ENODEV  cdev is invalid, the device is not operational or the ccw_device is
+	 not online.
+======== ======================================================================
 
 When the I/O request completes, the CDS first level interrupt handler will
 accumulate the status in a struct irb and then call the device interrupt handler.
-The intparm field will contain the value the device driver has associated with a 
-particular I/O request. If a pending device status was recognized, 
+The intparm field will contain the value the device driver has associated with a
+particular I/O request. If a pending device status was recognized,
 intparm will be set to 0 (zero). This may happen during I/O initiation or delayed
 by an alert status notification. In any case this status is not related to the
 current (last) I/O request. In case of a delayed status notification no special
@@ -282,9 +309,11 @@ never started, even though ccw_device_start() returned with successful completio
 The irb may contain an error value, and the device driver should check for this
 first:
 
--ETIMEDOUT: the common I/O layer terminated the request after the specified
-            timeout value
--EIO:       the common I/O layer terminated the request due to an error state
+========== =================================================================
+-ETIMEDOUT the common I/O layer terminated the request after the specified
+	   timeout value
+-EIO       the common I/O layer terminated the request due to an error state
+========== =================================================================
 
 If the concurrent sense flag in the extended status word (esw) in the irb is
 set, the field erw.scnt in the esw describes the number of device specific
@@ -294,6 +323,7 @@ sensing by the device driver itself is required.
 The device interrupt handler can use the following definitions to investigate
 the primary unit check source coded in sense byte 0 :
 
+======================= ====
 SNS0_CMD_REJECT         0x80
 SNS0_INTERVENTION_REQ   0x40
 SNS0_BUS_OUT_CHECK      0x20
@@ -301,36 +331,41 @@ SNS0_EQUIPMENT_CHECK    0x10
 SNS0_DATA_CHECK         0x08
 SNS0_OVERRUN            0x04
 SNS0_INCOMPL_DOMAIN     0x01
+======================= ====
 
 Depending on the device status, multiple of those values may be set together.
 Please refer to the device specific documentation for details.
 
 The irb->scsw.cstat field provides the (accumulated) subchannel status :
 
-SCHN_STAT_PCI            - program controlled interrupt
-SCHN_STAT_INCORR_LEN     - incorrect length
-SCHN_STAT_PROG_CHECK     - program check
-SCHN_STAT_PROT_CHECK     - protection check
-SCHN_STAT_CHN_DATA_CHK   - channel data check
-SCHN_STAT_CHN_CTRL_CHK   - channel control check
-SCHN_STAT_INTF_CTRL_CHK  - interface control check
-SCHN_STAT_CHAIN_CHECK    - chaining check
+========================= ============================
+SCHN_STAT_PCI             program controlled interrupt
+SCHN_STAT_INCORR_LEN      incorrect length
+SCHN_STAT_PROG_CHECK      program check
+SCHN_STAT_PROT_CHECK      protection check
+SCHN_STAT_CHN_DATA_CHK    channel data check
+SCHN_STAT_CHN_CTRL_CHK    channel control check
+SCHN_STAT_INTF_CTRL_CHK   interface control check
+SCHN_STAT_CHAIN_CHECK     chaining check
+========================= ============================
 
 The irb->scsw.dstat field provides the (accumulated) device status :
 
-DEV_STAT_ATTENTION   - attention
-DEV_STAT_STAT_MOD    - status modifier
-DEV_STAT_CU_END      - control unit end
-DEV_STAT_BUSY        - busy
-DEV_STAT_CHN_END     - channel end
-DEV_STAT_DEV_END     - device end
-DEV_STAT_UNIT_CHECK  - unit check
-DEV_STAT_UNIT_EXCEP  - unit exception
+===================== =================
+DEV_STAT_ATTENTION    attention
+DEV_STAT_STAT_MOD     status modifier
+DEV_STAT_CU_END       control unit end
+DEV_STAT_BUSY         busy
+DEV_STAT_CHN_END      channel end
+DEV_STAT_DEV_END      device end
+DEV_STAT_UNIT_CHECK   unit check
+DEV_STAT_UNIT_EXCEP   unit exception
+===================== =================
 
 Please see the ESA/390 Principles of Operation manual for details on the
 individual flag meanings.
 
-Usage Notes :
+Usage Notes:
 
 ccw_device_start() must be called disabled and with the ccw device lock held.
 
@@ -374,32 +409,39 @@ secondary status without error (alert status) is presented, this indicates
 successful completion for all overlapping ccw_device_start() requests that have
 been issued since the last secondary (final) status.
 
-Channel programs that intend to set the suspend flag on a channel command word 
-(CCW)  must start the I/O operation with the DOIO_ALLOW_SUSPEND option or the 
-suspend flag will cause a channel program check. At the time the channel program 
-becomes suspended an intermediate interrupt will be generated by the channel 
+Channel programs that intend to set the suspend flag on a channel command word
+(CCW)  must start the I/O operation with the DOIO_ALLOW_SUSPEND option or the
+suspend flag will cause a channel program check. At the time the channel program
+becomes suspended an intermediate interrupt will be generated by the channel
 subsystem.
 
-ccw_device_resume() - Resume Channel Program Execution 
+ccw_device_resume() - Resume Channel Program Execution
 
-If a device driver chooses to suspend the current channel program execution by 
-setting the CCW suspend flag on a particular CCW, the channel program execution 
-is suspended. In order to resume channel program execution the CIO layer 
-provides the ccw_device_resume() routine. 
+If a device driver chooses to suspend the current channel program execution by
+setting the CCW suspend flag on a particular CCW, the channel program execution
+is suspended. In order to resume channel program execution the CIO layer
+provides the ccw_device_resume() routine.
 
-int ccw_device_resume(struct ccw_device *cdev);
+::
 
-cdev - ccw_device the resume operation is requested for
+  int ccw_device_resume(struct ccw_device *cdev);
+
+====  ================================================
+cdev  ccw_device the resume operation is requested for
+====  ================================================
 
 The ccw_device_resume() function returns:
 
-        0  - suspended channel program is resumed
--EBUSY     - status pending
--ENODEV    - cdev invalid or not-operational subchannel 
--EINVAL    - resume function not applicable  
--ENOTCONN  - there is no I/O request pending for completion 
+=========   ==============================================
+	0   suspended channel program is resumed
+   -EBUSY   status pending
+  -ENODEV   cdev invalid or not-operational subchannel
+  -EINVAL   resume function not applicable
+-ENOTCONN   there is no I/O request pending for completion
+=========   ==============================================
 
 Usage Notes:
+
 Please have a look at the ccw_device_start() usage notes for more details on
 suspended channel programs.
 
@@ -412,22 +454,28 @@ command is provided.
 
 ccw_device_halt() must be called disabled and with the ccw device lock held.
 
-int ccw_device_halt(struct ccw_device *cdev,
-                    unsigned long intparm);
+::
 
-cdev    : ccw_device the halt operation is requested for
-intparm : interruption parameter; value is only used if no I/O
-          is outstanding, otherwise the intparm associated with
-          the I/O request is returned
+  int ccw_device_halt(struct ccw_device *cdev,
+		      unsigned long intparm);
 
-The ccw_device_halt() function returns :
+=======  =====================================================
+cdev     ccw_device the halt operation is requested for
+intparm  interruption parameter; value is only used if no I/O
+	 is outstanding, otherwise the intparm associated with
+	 the I/O request is returned
+=======  =====================================================
 
-      0 - request successfully initiated
--EBUSY  - the device is currently busy, or status pending.
--ENODEV - cdev invalid.
--EINVAL - The device is not operational or the ccw device is not online.
+The ccw_device_halt() function returns:
 
-Usage Notes :
+=======  ==============================================================
+      0  request successfully initiated
+-EBUSY   the device is currently busy, or status pending.
+-ENODEV  cdev invalid.
+-EINVAL  The device is not operational or the ccw device is not online.
+=======  ==============================================================
+
+Usage Notes:
 
 A device driver may write a never-ending channel program by writing a channel
 program that at its end loops back to its beginning by means of a transfer in
@@ -438,25 +486,34 @@ can then perform an appropriate action. Prior to interrupt of an outstanding
 read to a network device (with or without PCI flag) a ccw_device_halt()
 is required to end the pending operation.
 
-ccw_device_clear() - Terminage I/O Request Processing
+::
+
+  ccw_device_clear() - Terminage I/O Request Processing
 
 In order to terminate all I/O processing at the subchannel, the clear subchannel
 (CSCH) command is used. It can be issued via ccw_device_clear().
 
 ccw_device_clear() must be called disabled and with the ccw device lock held.
 
-int ccw_device_clear(struct ccw_device *cdev, unsigned long intparm);
+::
 
-cdev:	 ccw_device the clear operation is requested for
-intparm: interruption parameter (see ccw_device_halt())
+  int ccw_device_clear(struct ccw_device *cdev, unsigned long intparm);
+
+======= ===============================================
+cdev    ccw_device the clear operation is requested for
+intparm interruption parameter (see ccw_device_halt())
+======= ===============================================
 
 The ccw_device_clear() function returns:
 
-      0 - request successfully initiated
--ENODEV - cdev invalid
--EINVAL - The device is not operational or the ccw device is not online.
+=======  ==============================================================
+      0  request successfully initiated
+-ENODEV  cdev invalid
+-EINVAL  The device is not operational or the ccw device is not online.
+=======  ==============================================================
 
 Miscellaneous Support Routines
+------------------------------
 
 This chapter describes various routines to be used in a Linux/390 device
 driver programming environment.
@@ -466,7 +523,8 @@ get_ccwdev_lock()
 Get the address of the device specific lock. This is then used in
 spin_lock() / spin_unlock() calls.
 
+::
 
-__u8 ccw_device_get_path_mask(struct ccw_device *cdev);
+  __u8 ccw_device_get_path_mask(struct ccw_device *cdev);
 
 Get the mask of the path currently available for cdev.
diff --git a/Documentation/s390/CommonIO b/Documentation/s390/common_io.rst
similarity index 87%
rename from Documentation/s390/CommonIO
rename to Documentation/s390/common_io.rst
index 6e0f63f343b4..846485681ce7 100644
--- a/Documentation/s390/CommonIO
+++ b/Documentation/s390/common_io.rst
@@ -1,5 +1,9 @@
-S/390 common I/O-Layer - command line parameters, procfs and debugfs entries
-============================================================================
+======================
+S/390 common I/O-Layer
+======================
+
+command line parameters, procfs and debugfs entries
+===================================================
 
 Command line parameters
 -----------------------
@@ -13,7 +17,7 @@ Command line parameters
 	device := {all | [!]ipldev | [!]condev | [!]<devno> | [!]<devno>-<devno>}
 
   The given devices will be ignored by the common I/O-layer; no detection
-  and device sensing will be done on any of those devices. The subchannel to 
+  and device sensing will be done on any of those devices. The subchannel to
   which the device in question is attached will be treated as if no device was
   attached.
 
@@ -28,14 +32,20 @@ Command line parameters
   keywords can be used to refer to the CCW based boot device and CCW console
   device respectively (these are probably useful only when combined with the '!'
   operator). The '!' operator will cause the I/O-layer to _not_ ignore a device.
-  The command line is parsed from left to right.
+  The command line
+  is parsed from left to right.
+
+  For example::
 
-  For example, 
 	cio_ignore=0.0.0023-0.0.0042,0.0.4711
+
   will ignore all devices ranging from 0.0.0023 to 0.0.0042 and the device
   0.0.4711, if detected.
-  As another example,
+
+  As another example::
+
 	cio_ignore=all,!0.0.4711,!0.0.fd00-0.0.fd02
+
   will ignore all devices but 0.0.4711, 0.0.fd00, 0.0.fd01, 0.0.fd02.
 
   By default, no devices are ignored.
@@ -48,40 +58,45 @@ Command line parameters
 
   Lists the ranges of devices (by bus id) which are ignored by common I/O.
 
-  You can un-ignore certain or all devices by piping to /proc/cio_ignore. 
-  "free all" will un-ignore all ignored devices, 
+  You can un-ignore certain or all devices by piping to /proc/cio_ignore.
+  "free all" will un-ignore all ignored devices,
   "free <device range>, <device range>, ..." will un-ignore the specified
   devices.
 
   For example, if devices 0.0.0023 to 0.0.0042 and 0.0.4711 are ignored,
+
   - echo free 0.0.0030-0.0.0032 > /proc/cio_ignore
     will un-ignore devices 0.0.0030 to 0.0.0032 and will leave devices 0.0.0023
     to 0.0.002f, 0.0.0033 to 0.0.0042 and 0.0.4711 ignored;
   - echo free 0.0.0041 > /proc/cio_ignore will furthermore un-ignore device
     0.0.0041;
-  - echo free all > /proc/cio_ignore will un-ignore all remaining ignored 
+  - echo free all > /proc/cio_ignore will un-ignore all remaining ignored
     devices.
 
-  When a device is un-ignored, device recognition and sensing is performed and 
+  When a device is un-ignored, device recognition and sensing is performed and
   the device driver will be notified if possible, so the device will become
   available to the system. Note that un-ignoring is performed asynchronously.
 
-  You can also add ranges of devices to be ignored by piping to 
+  You can also add ranges of devices to be ignored by piping to
   /proc/cio_ignore; "add <device range>, <device range>, ..." will ignore the
   specified devices.
 
   Note: While already known devices can be added to the list of devices to be
-        ignored, there will be no effect on then. However, if such a device
+	ignored, there will be no effect on then. However, if such a device
 	disappears and then reappears, it will then be ignored. To make
 	known devices go away, you need the "purge" command (see below).
 
-  For example,
+  For example::
+
 	"echo add 0.0.a000-0.0.accc, 0.0.af00-0.0.afff > /proc/cio_ignore"
+
   will add 0.0.a000-0.0.accc and 0.0.af00-0.0.afff to the list of ignored
   devices.
 
-  You can remove already known but now ignored devices via
+  You can remove already known but now ignored devices via::
+
 	"echo purge > /proc/cio_ignore"
+
   All devices ignored but still registered and not online (= not in use)
   will be deregistered and thus removed from the system.
 
@@ -115,11 +130,11 @@ debugfs entries
     Various debug messages from the common I/O-layer.
 
   - /sys/kernel/debug/s390dbf/cio_trace/hex_ascii
-    Logs the calling of functions in the common I/O-layer and, if applicable, 
+    Logs the calling of functions in the common I/O-layer and, if applicable,
     which subchannel they were called for, as well as dumps of some data
     structures (like irb in an error case).
 
-  The level of logging can be changed to be more or less verbose by piping to 
+  The level of logging can be changed to be more or less verbose by piping to
   /sys/kernel/debug/s390dbf/cio_*/level a number between 0 and 6; see the
-  documentation on the S/390 debug feature (Documentation/s390/s390dbf.txt)
+  documentation on the S/390 debug feature (Documentation/s390/s390dbf.rst)
   for details.
diff --git a/Documentation/s390/DASD b/Documentation/s390/dasd.rst
similarity index 92%
rename from Documentation/s390/DASD
rename to Documentation/s390/dasd.rst
index 9963f1e9c98a..9e22247285c8 100644
--- a/Documentation/s390/DASD
+++ b/Documentation/s390/dasd.rst
@@ -1,4 +1,6 @@
+==================
 DASD device driver
+==================
 
 S/390's disk devices (DASDs) are managed by Linux via the DASD device
 driver. It is valid for all types of DASDs and represents them to
@@ -14,14 +16,14 @@ parameters are to be given in hexadecimal notation without a leading
 If you supply kernel parameters the different instances are processed
 in order of appearance and a minor number is reserved for any device
 covered by the supplied range up to 64 volumes. Additional DASDs are
-ignored. If you do not supply the 'dasd=' kernel parameter at all, the 
+ignored. If you do not supply the 'dasd=' kernel parameter at all, the
 DASD driver registers all supported DASDs of your system to a minor
 number in ascending order of the subchannel number.
 
 The driver currently supports ECKD-devices and there are stubs for
 support of the FBA and CKD architectures. For the FBA architecture
 only some smart data structures are missing to make the support
-complete. 
+complete.
 We performed our testing on 3380 and 3390 type disks of different
 sizes, under VM and on the bare hardware (LPAR), using internal disks
 of the multiprise as well as a RAMAC virtual array. Disks exported by
@@ -34,19 +36,22 @@ accessibility of the DASD from other OSs. In a later stage we will
 provide support of partitions, maybe VTOC oriented or using a kind of
 partition table in the label record.
 
-USAGE
+Usage
+=====
 
 -Low-level format (?CKD only)
 For using an ECKD-DASD as a Linux harddisk you have to low-level
 format the tracks by issuing the BLKDASDFORMAT-ioctl on that
 device. This will erase any data on that volume including IBM volume
-labels, VTOCs etc. The ioctl may take a 'struct format_data *' or
-'NULL' as an argument.  
-typedef struct {
+labels, VTOCs etc. The ioctl may take a `struct format_data *` or
+'NULL' as an argument::
+
+  typedef struct {
 	int start_unit;
 	int stop_unit;
 	int blksize;
-} format_data_t;
+  } format_data_t;
+
 When a NULL argument is passed to the BLKDASDFORMAT ioctl the whole
 disk is formatted to a blocksize of 1024 bytes. Otherwise start_unit
 and stop_unit are the first and last track to be formatted. If
@@ -56,17 +61,23 @@ up to the last track. blksize can be any power of two between 512 and
 1kB blocks anyway and you gain approx. 50% of capacity increasing your
 blksize from 512 byte to 1kB.
 
--Make a filesystem
+Make a filesystem
+=================
+
 Then you can mk??fs the filesystem of your choice on that volume or
 partition. For reasons of sanity you should build your filesystem on
-the partition /dev/dd?1 instead of the whole volume. You only lose 3kB	
+the partition /dev/dd?1 instead of the whole volume. You only lose 3kB
 but may be sure that you can reuse your data after introduction of a
 real partition table.
 
-BUGS:
+Bugs
+====
+
 - Performance sometimes is rather low because we don't fully exploit clustering
 
-TODO-List:
+TODO-List
+=========
+
 - Add IBM'S Disk layout to genhd
 - Enhance driver to use more than one major number
 - Enable usage as a module
diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/debugging390.rst
similarity index 53%
rename from Documentation/s390/Debugging390.txt
rename to Documentation/s390/debugging390.rst
index c35804c238ad..d49305fd5e1a 100644
--- a/Documentation/s390/Debugging390.txt
+++ b/Documentation/s390/debugging390.rst
@@ -1,9 +1,12 @@
+=============================================
+Debugging on Linux for s/390 & z/Architecture
+=============================================
 
-		  Debugging on Linux for s/390 & z/Architecture
-				       by
-	  Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
-    Copyright (C) 2000-2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
-			Best viewed with fixed width fonts
+Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
+
+Copyright (C) 2000-2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
+
+.. Best viewed with fixed width fonts
 
 Overview of Document:
 =====================
@@ -17,32 +20,32 @@ It is intended like the Enterprise Systems Architecture/390 Reference Summary
 to be printed out & used as a quick cheat sheet self help style reference when
 problems occur.
 
-Contents
-========
-Register Set
-Address Spaces on Intel Linux
-Address Spaces on Linux for s/390 & z/Architecture
-The Linux for s/390 & z/Architecture Kernel Task Structure
-Register Usage & Stackframes on Linux for s/390 & z/Architecture
-A sample program with comments
-Compiling programs for debugging on Linux for s/390 & z/Architecture
-Debugging under VM
-s/390 & z/Architecture IO Overview
-Debugging IO on s/390 & z/Architecture under VM
-GDB on s/390 & z/Architecture
-Stack chaining in gdb by hand
-Examining core dumps
-ldd
-Debugging modules
-The proc file system
-SysRq
-References
-Special Thanks
+.. Contents
+   ========
+   Register Set
+   Address Spaces on Intel Linux
+   Address Spaces on Linux for s/390 & z/Architecture
+   The Linux for s/390 & z/Architecture Kernel Task Structure
+   Register Usage & Stackframes on Linux for s/390 & z/Architecture
+   A sample program with comments
+   Compiling programs for debugging on Linux for s/390 & z/Architecture
+   Debugging under VM
+   s/390 & z/Architecture IO Overview
+   Debugging IO on s/390 & z/Architecture under VM
+   GDB on s/390 & z/Architecture
+   Stack chaining in gdb by hand
+   Examining core dumps
+   ldd
+   Debugging modules
+   The proc file system
+   SysRq
+   References
+   Special Thanks
 
 Register Set
 ============
 The current architectures have the following registers.
- 
+
 16 General propose registers, 32 bit on s/390 and 64 bit on z/Architecture,
 r0-r15 (or gpr0-gpr15), used for arithmetic and addressing.
 
@@ -59,20 +62,22 @@ Access register 0 (and access register 1 on z/Architecture, which needs a
 64 bit pointer) is currently used by the pthread library as a pointer to
 the current running threads private area.
 
-16 64 bit floating point registers (fp0-fp15 ) IEEE & HFP floating 
-point format compliant on G5 upwards & a Floating point control reg (FPC) 
-4  64 bit registers (fp0,fp2,fp4 & fp6) HFP only on older machines.
+16 64-bit floating point registers (fp0-fp15 ) IEEE & HFP floating
+point format compliant on G5 upwards & a Floating point control reg (FPC)
+
+4  64-bit registers (fp0,fp2,fp4 & fp6) HFP only on older machines.
+
 Note:
-Linux (currently) always uses IEEE & emulates G5 IEEE format on older machines,
-( provided the kernel is configured for this ).
+   Linux (currently) always uses IEEE & emulates G5 IEEE format on older
+   machines, ( provided the kernel is configured for this ).
 
 
 The PSW is the most important register on the machine it
-is 64 bit on s/390 & 128 bit on z/Architecture & serves the roles of 
+is 64 bit on s/390 & 128 bit on z/Architecture & serves the roles of
 a program counter (pc), condition code register,memory space designator.
 In IBM standard notation I am counting bit 0 as the MSB.
 It has several advantages over a normal program counter
-in that you can change address translation & program counter 
+in that you can change address translation & program counter
 in a single instruction. To change address translation,
 e.g. switching address translation off requires that you
 have a logical=physical mapping for the address you are
@@ -206,14 +211,18 @@ It exists between the real addresses 0-4096 on s/390 and between 0-8192 on
 z/Architecture and is exchanged with one page on s/390 or two pages on
 z/Architecture in absolute storage by the set prefix instruction during Linux
 startup.
+
 This page is mapped to a different prefix for each processor in an SMP
 configuration (assuming the OS designer is sane of course).
+
 Bytes 0-512 (200 hex) on s/390 and 0-512, 4096-4544, 4604-5119 currently on
 z/Architecture are used by the processor itself for holding such information
 as exception indications and entry points for exceptions.
+
 Bytes after 0xc00 hex are used by linux for per processor globals on s/390 and
 z/Architecture (there is a gap on z/Architecture currently between 0xc00 and
 0x1000, too, which is used by Linux).
+
 The closest thing to this on traditional architectures is the interrupt
 vector table. This is a good thing & does simplify some of the kernel coding
 however it means that we now cannot catch stray NULL pointers in the
@@ -225,27 +234,29 @@ Address Spaces on Intel Linux
 =============================
 
 The traditional Intel Linux is approximately mapped as follows forgive
-the ascii art.
-0xFFFFFFFF 4GB Himem		*****************
-				*		*
-				* Kernel Space	*
-				*		*
-				*****************	  ****************
-User Space Himem		*  User Stack	*	  *		 *
-(typically 0xC0000000 3GB )	*****************	  *		 *
-				*  Shared Libs	*	  * Next Process *
-				*****************	  *	to	 *
-				*		*   <==   *	Run	 *  <==
-				*  User Program *	  *		 *
-				*   Data BSS	*	  *		 *
-				*    Text	*	  *		 *
-				*   Sections	*	  *		 *
-0x00000000			*****************	  ****************
+the ascii art::
+
+  0xFFFFFFFF 4GB Himem          *****************
+				*               *
+				* Kernel Space  *
+				*               *
+				*****************         ****************
+  User Space Himem              *  User Stack   *         *              *
+  (typically 0xC0000000 3GB )   *****************         *              *
+				*  Shared Libs  *         * Next Process *
+				*****************         *     to       *
+				*               *   <==   *     Run      *  <==
+				*  User Program *         *              *
+				*   Data BSS    *         *              *
+				*    Text       *         *              *
+				*   Sections    *         *              *
+  0x00000000                    *****************         ****************
 
 Now it is easy to see that on Intel it is quite easy to recognise a kernel
 address as being one greater than user space himem (in this case 0xC0000000),
 and addresses of less than this are the ones in the current running program on
 this processor (if an smp box).
+
 If using the virtual machine ( VM ) as a debugger it is quite difficult to
 know which user process is running as the address space you are looking at
 could be from any process in the run queue.
@@ -256,6 +267,7 @@ of Real Address=Virtual Address-User Space Himem.
 This means that on Intel the kernel linux can typically only address
 Himem=0xFFFFFFFF-0xC0000000=1GB & this is all the RAM these machines
 can typically use.
+
 They can lower User Himem to 2GB or lower & thus be
 able to use 2GB of RAM however this shrinks the maximum size
 of User Space from 3GB to 2GB they have a no win limit of 4GB unless
@@ -264,31 +276,31 @@ they go to 64 Bit.
 
 On 390 our limitations & strengths make us slightly different.
 For backward compatibility we are only allowed use 31 bits (2GB)
-of our 32 bit addresses, however, we use entirely separate address 
+of our 32 bit addresses, however, we use entirely separate address
 spaces for the user & kernel.
 
 This means we can support 2GB of non Extended RAM on s/390, & more
-with the Extended memory management swap device & 
+with the Extended memory management swap device &
 currently 4TB of physical memory currently on z/Architecture.
 
 
 Address Spaces on Linux for s/390 & z/Architecture
 ==================================================
 
-Our addressing scheme is basically as follows:
+Our addressing scheme is basically as follows::
 
-				   Primary Space	       Home Space
-Himem 0x7fffffff 2GB on s/390    *****************          ****************
-currently 0x3ffffffffff (2^42)-1 *  User Stack   *          *              *
-on z/Architecture.		 *****************          *              *
-				 *  Shared Libs  *	    *		   *
-				 *****************	    *		   *
-			         *               *          *    Kernel    *  
-		                 *  User Program *          *              *
-		                 *   Data BSS    *          *              *
-                                 *    Text       *          *              *
-            			 *   Sections    *          *              *
-0x00000000                       *****************          ****************
+				   Primary Space               Home Space
+  Himem 0x7fffffff 2GB on s/390    *****************          ****************
+  currently 0x3ffffffffff (2^42)-1 *  User Stack   *          *              *
+  on z/Architecture.               *****************          *              *
+				   *  Shared Libs  *          *              *
+				   *****************          *              *
+				   *               *          *    Kernel    *
+				   *  User Program *          *              *
+				   *   Data BSS    *          *              *
+				   *    Text       *          *              *
+				   *   Sections    *          *              *
+  0x00000000                       *****************          ****************
 
 This also means that we need to look at the PSW problem state bit and the
 addressing mode to decide whether we are looking at user or kernel space.
@@ -304,20 +316,25 @@ instruction on a user space address is performed.
 When also looking at the ASCE control registers, this means:
 
 User space:
+
 - runs in primary or access register mode
 - cr1 contains the user asce
 - cr7 contains the user asce
 - cr13 contains the kernel asce
 
 Kernel space:
+
 - runs in home space mode
 - cr1 contains the user or kernel asce
-  -> the kernel asce is loaded when a uaccess requires primary or
-     secondary address mode
+
+  - the kernel asce is loaded when a uaccess requires primary or
+    secondary address mode
+
 - cr7 contains the user or kernel asce, (changed with set_fs())
 - cr13 contains the kernel asce
 
 In case of uaccess the kernel changes to:
+
 - primary space mode in case of a uaccess (copy_to_user) and uses
   e.g. the mvcp instruction to access user space. However the kernel
   will stay in home space mode if the mvcos instruction is available
@@ -337,41 +354,44 @@ Virtual Addresses on s/390 & z/Architecture
 A virtual address on s/390 is made up of 3 parts
 The SX (segment index, roughly corresponding to the PGD & PMD in Linux
 terminology) being bits 1-11.
+
 The PX (page index, corresponding to the page table entry (pte) in Linux
 terminology) being bits 12-19.
+
 The remaining bits BX (the byte index are the offset in the page )
 i.e. bits 20 to 31.
 
 On z/Architecture in linux we currently make up an address from 4 parts.
-The region index bits (RX) 0-32 we currently use bits 22-32
-The segment index (SX) being bits 33-43
-The page index (PX) being bits  44-51
-The byte index (BX) being bits  52-63
+
+- The region index bits (RX) 0-32 we currently use bits 22-32
+- The segment index (SX) being bits 33-43
+- The page index (PX) being bits  44-51
+- The byte index (BX) being bits  52-63
 
 Notes:
-1) s/390 has no PMD so the PMD is really the PGD also.
-A lot of this stuff is defined in pgtable.h.
+  1) s/390 has no PMD so the PMD is really the PGD also.
+     A lot of this stuff is defined in pgtable.h.
 
-2) Also seeing as s/390's page indexes are only 1k  in size 
-(bits 12-19 x 4 bytes per pte ) we use 1 ( page 4k )
-to make the best use of memory by updating 4 segment indices 
-entries each time we mess with a PMD & use offsets 
-0,1024,2048 & 3072 in this page as for our segment indexes.
-On z/Architecture our page indexes are now 2k in size
-( bits 12-19 x 8 bytes per pte ) we do a similar trick
-but only mess with 2 segment indices each time we mess with
-a PMD.
+  2) Also seeing as s/390's page indexes are only 1k  in size
+     (bits 12-19 x 4 bytes per pte ) we use 1 ( page 4k )
+     to make the best use of memory by updating 4 segment indices
+     entries each time we mess with a PMD & use offsets
+     0,1024,2048 & 3072 in this page as for our segment indexes.
+     On z/Architecture our page indexes are now 2k in size
+     ( bits 12-19 x 8 bytes per pte ) we do a similar trick
+     but only mess with 2 segment indices each time we mess with
+     a PMD.
+
+  3) As z/Architecture supports up to a massive 5-level page table lookup we
+     can only use 3 currently on Linux ( as this is all the generic kernel
+     currently supports ) however this may change in future
+     this allows us to access ( according to my sums )
+     4TB of virtual storage per process i.e.
+     4096*512(PTES)*1024(PMDS)*2048(PGD) = 4398046511104 bytes,
+     enough for another 2 or 3 of years I think :-).
+     to do this we use a region-third-table designation type in
+     our address space control registers.
 
-3) As z/Architecture supports up to a massive 5-level page table lookup we
-can only use 3 currently on Linux ( as this is all the generic kernel
-currently supports ) however this may change in future
-this allows us to access ( according to my sums )
-4TB of virtual storage per process i.e.
-4096*512(PTES)*1024(PMDS)*2048(PGD) = 4398046511104 bytes,
-enough for another 2 or 3 of years I think :-).
-to do this we use a region-third-table designation type in
-our address space control registers.
- 
 
 The Linux for s/390 & z/Architecture Kernel Task Structure
 ==========================================================
@@ -382,42 +402,43 @@ the __LC_KERNEL_STACK variable in the spare prefix area for this cpu
 (which we use for per-processor globals).
 
 The kernel stack pointer is intimately tied with the task structure for
-each processor as follows.
+each processor as follows::
 
-                      s/390
-            ************************
-            *  1 page kernel stack *
-	    *        ( 4K )        *
-            ************************
-            *   1 page task_struct *        
-            *        ( 4K )        *
-8K aligned  ************************ 
+			s/390
+	      ************************
+	      *  1 page kernel stack *
+	      *        ( 4K )        *
+	      ************************
+	      *   1 page task_struct *
+	      *        ( 4K )        *
+  8K aligned  ************************
 
-                 z/Architecture
-            ************************
-            *  2 page kernel stack *
-	    *        ( 8K )        *
-            ************************
-            *  2 page task_struct  *        
-            *        ( 8K )        *
-16K aligned ************************ 
+		   z/Architecture
+	      ************************
+	      *  2 page kernel stack *
+	      *        ( 8K )        *
+	      ************************
+	      *  2 page task_struct  *
+	      *        ( 8K )        *
+  16K aligned ************************
 
 What this means is that we don't need to dedicate any register or global
 variable to point to the current running process & can retrieve it with the
-following very simple construct for s/390 & one very similar for z/Architecture.
+following very simple construct for s/390 & one very similar for
+z/Architecture::
 
-static inline struct task_struct * get_current(void)
-{
-        struct task_struct *current;
-        __asm__("lhi   %0,-8192\n\t"
-                "nr    %0,15"
-                : "=r" (current) );
-        return current;
-}
+  static inline struct task_struct * get_current(void)
+  {
+	struct task_struct *current;
+	__asm__("lhi   %0,-8192\n\t"
+		"nr    %0,15"
+		: "=r" (current) );
+	return current;
+  }
 
 i.e. just anding the current kernel stack pointer with the mask -8192.
 Thankfully because Linux doesn't have support for nested IO interrupts
-& our devices have large buffers can survive interrupts being shut for 
+& our devices have large buffers can survive interrupts being shut for
 short amounts of time we don't need a separate stack for interrupts.
 
 
@@ -428,7 +449,7 @@ Register Usage & Stackframes on Linux for s/390 & z/Architecture
 Overview:
 ---------
 This is the code that gcc produces at the top & the bottom of
-each function. It usually is fairly consistent & similar from 
+each function. It usually is fairly consistent & similar from
 function to function & if you know its layout you can probably
 make some headway in finding the ultimate cause of a problem
 after a crash without a source level debugger.
@@ -443,87 +464,95 @@ didn't have to maintain compatibility with older linkage formats.
 Glossary:
 ---------
 alloca:
-This is a built in compiler function for runtime allocation
-of extra space on the callers stack which is obviously freed
-up on function exit ( e.g. the caller may choose to allocate nothing
-of a buffer of 4k if required for temporary purposes ), it generates 
-very efficient code ( a few cycles  ) when compared to alternatives 
-like malloc.
+  This is a built in compiler function for runtime allocation
+  of extra space on the callers stack which is obviously freed
+  up on function exit ( e.g. the caller may choose to allocate nothing
+  of a buffer of 4k if required for temporary purposes ), it generates
+  very efficient code ( a few cycles  ) when compared to alternatives
+  like malloc.
 
-automatics: These are local variables on the stack,
-i.e they aren't in registers & they aren't static.
+automatics:
+  These are local variables on the stack, i.e they aren't in registers &
+  they aren't static.
 
 back-chain:
-This is a pointer to the stack pointer before entering a
-framed functions ( see frameless function ) prologue got by 
-dereferencing the address of the current stack pointer,
- i.e. got by accessing the 32 bit value at the stack pointers
-current location.
+  This is a pointer to the stack pointer before entering a
+  framed functions ( see frameless function ) prologue got by
+  dereferencing the address of the current stack pointer,
+  i.e. got by accessing the 32 bit value at the stack pointers
+  current location.
 
 base-pointer:
-This is a pointer to the back of the literal pool which
-is an area just behind each procedure used to store constants
-in each function.
+  This is a pointer to the back of the literal pool which
+  is an area just behind each procedure used to store constants
+  in each function.
 
-call-clobbered: The caller probably needs to save these registers if there 
-is something of value in them, on the stack or elsewhere before making a 
-call to another procedure so that it can restore it later.
+call-clobbered:
+  The caller probably needs to save these registers if there
+  is something of value in them, on the stack or elsewhere before making a
+  call to another procedure so that it can restore it later.
 
 epilogue:
-The code generated by the compiler to return to the caller.
+  The code generated by the compiler to return to the caller.
 
-frameless-function
-A frameless function in Linux for s390 & z/Architecture is one which doesn't 
-need more than the register save area (96 bytes on s/390, 160 on z/Architecture)
-given to it by the caller.
-A frameless function never:
-1) Sets up a back chain.
-2) Calls alloca.
-3) Calls other normal functions
-4) Has automatics.
+frameless-function:
+  A frameless function in Linux for s390 & z/Architecture is one which doesn't
+  need more than the register save area (96 bytes on s/390, 160 on z/Architecture)
+  given to it by the caller.
+
+  A frameless function never:
+
+  1) Sets up a back chain.
+  2) Calls alloca.
+  3) Calls other normal functions
+  4) Has automatics.
 
 GOT-pointer:
-This is a pointer to the global-offset-table in ELF
-( Executable Linkable Format, Linux'es most common executable format ),
-all globals & shared library objects are found using this pointer.
+  This is a pointer to the global-offset-table in ELF
+  ( Executable Linkable Format, Linux'es most common executable format ),
+  all globals & shared library objects are found using this pointer.
 
 lazy-binding
-ELF shared libraries are typically only loaded when routines in the shared
-library are actually first called at runtime. This is lazy binding.
+  ELF shared libraries are typically only loaded when routines in the shared
+  library are actually first called at runtime. This is lazy binding.
 
 procedure-linkage-table
-This is a table found from the GOT which contains pointers to routines
-in other shared libraries which can't be called to by easier means.
+  This is a table found from the GOT which contains pointers to routines
+  in other shared libraries which can't be called to by easier means.
 
 prologue:
-The code generated by the compiler to set up the stack frame.
+  The code generated by the compiler to set up the stack frame.
 
 outgoing-args:
-This is extra area allocated on the stack of the calling function if the
-parameters for the callee's cannot all be put in registers, the same
-area can be reused by each function the caller calls.
+  This is extra area allocated on the stack of the calling function if the
+  parameters for the callee's cannot all be put in registers, the same
+  area can be reused by each function the caller calls.
 
 routine-descriptor:
-A COFF  executable format based concept of a procedure reference 
-actually being 8 bytes or more as opposed to a simple pointer to the routine.
-This is typically defined as follows
-Routine Descriptor offset 0=Pointer to Function
-Routine Descriptor offset 4=Pointer to Table of Contents
-The table of contents/TOC is roughly equivalent to a GOT pointer.
-& it means that shared libraries etc. can be shared between several
-environments each with their own TOC.
+  A COFF  executable format based concept of a procedure reference
+  actually being 8 bytes or more as opposed to a simple pointer to the routine.
+  This is typically defined as follows:
 
- 
-static-chain: This is used in nested functions a concept adopted from pascal 
-by gcc not used in ansi C or C++ ( although quite useful ), basically it
-is a pointer used to reference local variables of enclosing functions.
-You might come across this stuff once or twice in your lifetime.
+  - Routine Descriptor offset 0=Pointer to Function
+  - Routine Descriptor offset 4=Pointer to Table of Contents
 
-e.g.
-The function below should return 11 though gcc may get upset & toss warnings 
-about unused variables.
-int FunctionA(int a)
-{
+  The table of contents/TOC is roughly equivalent to a GOT pointer.
+  & it means that shared libraries etc. can be shared between several
+  environments each with their own TOC.
+
+static-chain:
+  This is used in nested functions a concept adopted from pascal
+  by gcc not used in ansi C or C++ ( although quite useful ), basically it
+  is a pointer used to reference local variables of enclosing functions.
+  You might come across this stuff once or twice in your lifetime.
+
+  e.g.
+
+  The function below should return 11 though gcc may get upset & toss warnings
+  about unused variables::
+
+    int FunctionA(int a)
+    {
 	int b;
 	FunctionC(int c)
 	{
@@ -531,19 +560,21 @@ int FunctionA(int a)
 	}
 	FunctionC(10);
 	return(b);
-}
+    }
 
 
 s/390 & z/Architecture Register usage
 =====================================
+
+======== ========================================== ===============
 r0       used by syscalls/assembly                  call-clobbered
-r1	 used by syscalls/assembly                  call-clobbered
+r1       used by syscalls/assembly                  call-clobbered
 r2       argument 0 / return value 0                call-clobbered
 r3       argument 1 / return value 1 (if long long) call-clobbered
 r4       argument 2                                 call-clobbered
 r5       argument 3                                 call-clobbered
-r6	 argument 4				    saved
-r7       pointer-to arguments 5 to ...              saved      
+r6       argument 4                                 saved
+r7       pointer-to arguments 5 to ...              saved
 r8       this & that                                saved
 r9       this & that                                saved
 r10      static-chain ( if nested function )        saved
@@ -557,65 +588,74 @@ f0       argument 0 / return value ( float/double ) call-clobbered
 f2       argument 1                                 call-clobbered
 f4       z/Architecture argument 2                  saved
 f6       z/Architecture argument 3                  saved
+======== ========================================== ===============
+
 The remaining floating points
 f1,f3,f5 f7-f15 are call-clobbered.
 
 Notes:
 ------
 1) The only requirement is that registers which are used
-by the callee are saved, e.g. the compiler is perfectly
-capable of using r11 for purposes other than a frame a
-frame pointer if a frame pointer is not needed.
-2) In functions with variable arguments e.g. printf the calling procedure 
-is identical to one without variable arguments & the same number of 
-parameters. However, the prologue of this function is somewhat more
-hairy owing to it having to move these parameters to the stack to
-get va_start, va_arg & va_end to work.
+   by the callee are saved, e.g. the compiler is perfectly
+   capable of using r11 for purposes other than a frame a
+   frame pointer if a frame pointer is not needed.
+2) In functions with variable arguments e.g. printf the calling procedure
+   is identical to one without variable arguments & the same number of
+   parameters. However, the prologue of this function is somewhat more
+   hairy owing to it having to move these parameters to the stack to
+   get va_start, va_arg & va_end to work.
 3) Access registers are currently unused by gcc but are used in
-the kernel. Possibilities exist to use them at the moment for
-temporary storage but it isn't recommended.
+   the kernel. Possibilities exist to use them at the moment for
+   temporary storage but it isn't recommended.
 4) Only 4 of the floating point registers are used for
-parameter passing as older machines such as G3 only have only 4
-& it keeps the stack frame compatible with other compilers.
-However with IEEE floating point emulation under linux on the
-older machines you are free to use the other 12.
-5) A long long or double parameter cannot be have the 
-first 4 bytes in a register & the second four bytes in the 
-outgoing args area. It must be purely in the outgoing args
-area if crossing this boundary.
+   parameter passing as older machines such as G3 only have only 4
+   & it keeps the stack frame compatible with other compilers.
+   However with IEEE floating point emulation under linux on the
+   older machines you are free to use the other 12.
+5) A long long or double parameter cannot be have the
+   first 4 bytes in a register & the second four bytes in the
+   outgoing args area. It must be purely in the outgoing args
+   area if crossing this boundary.
 6) Floating point parameters are mixed with outgoing args
-on the outgoing args area in the order the are passed in as parameters.
-7) Floating point arguments 2 & 3 are saved in the outgoing args area for 
-z/Architecture
+   on the outgoing args area in the order the are passed in as parameters.
+7) Floating point arguments 2 & 3 are saved in the outgoing args area for
+   z/Architecture
 
 
 Stack Frame Layout
 ------------------
+
+========= ============== ======================================================
 s/390     z/Architecture
-0         0             back chain ( a 0 here signifies end of back chain )
-4         8             eos ( end of stack, not used on Linux for S390 used in other linkage formats )
-8         16            glue used in other s/390 linkage formats for saved routine descriptors etc.
-12        24            glue used in other s/390 linkage formats for saved routine descriptors etc.
-16        32            scratch area
-20        40            scratch area
-24        48            saved r6 of caller function
-28        56            saved r7 of caller function
-32        64            saved r8 of caller function
-36        72            saved r9 of caller function
-40        80            saved r10 of caller function
-44        88            saved r11 of caller function
-48        96            saved r12 of caller function
-52        104           saved r13 of caller function
-56        112           saved r14 of caller function
-60        120           saved r15 of caller function
-64        128           saved f4 of caller function
-72        132           saved f6 of caller function
-80                      undefined
-96        160           outgoing args passed from caller to callee
-96+x      160+x         possible stack alignment ( 8 bytes desirable )
-96+x+y    160+x+y       alloca space of caller ( if used )
-96+x+y+z  160+x+y+z     automatics of caller ( if used )
-0                       back-chain
+========= ============== ======================================================
+0         0              back chain ( a 0 here signifies end of back chain )
+4         8              eos ( end of stack, not used on Linux for S390 used
+			 in other linkage formats )
+8         16             glue used in other s/390 linkage formats for saved
+			 routine descriptors etc.
+12        24             glue used in other s/390 linkage formats for saved
+			 routine descriptors etc.
+16        32             scratch area
+20        40             scratch area
+24        48             saved r6 of caller function
+28        56             saved r7 of caller function
+32        64             saved r8 of caller function
+36        72             saved r9 of caller function
+40        80             saved r10 of caller function
+44        88             saved r11 of caller function
+48        96             saved r12 of caller function
+52        104            saved r13 of caller function
+56        112            saved r14 of caller function
+60        120            saved r15 of caller function
+64        128            saved f4 of caller function
+72        132            saved f6 of caller function
+80                       undefined
+96        160            outgoing args passed from caller to callee
+96+x      160+x          possible stack alignment ( 8 bytes desirable )
+96+x+y    160+x+y        alloca space of caller ( if used )
+96+x+y+z  160+x+y+z      automatics of caller ( if used )
+0                        back-chain
+========= ============== ======================================================
 
 A sample program with comments.
 ===============================
@@ -623,82 +663,86 @@ A sample program with comments.
 Comments on the function test
 -----------------------------
 1) It didn't need to set up a pointer to the constant pool gpr13 as it is not
-used ( :-( ).
+   used ( :-( ).
 2) This is a frameless function & no stack is bought.
 3) The compiler was clever enough to recognise that it could return the
-value in r2 as well as use it for the passed in parameter ( :-) ).
-4) The basr ( branch relative & save ) trick works as follows the instruction 
-has a special case with r0,r0 with some instruction operands is understood as 
-the literal value 0, some risc architectures also do this ). So now
-we are branching to the next address & the address new program counter is
-in r13,so now we subtract the size of the function prologue we have executed
-+ the size of the literal pool to get to the top of the literal pool
-0040037c int test(int b)
-{                                                          # Function prologue below
-  40037c:	90 de f0 34 	stm	%r13,%r14,52(%r15) # Save registers r13 & r14
-  400380:	0d d0       	basr	%r13,%r0           # Set up pointer to constant pool using
-  400382:	a7 da ff fa 	ahi	%r13,-6            # basr trick
+   value in r2 as well as use it for the passed in parameter ( :-) ).
+4) The basr ( branch relative & save ) trick works as follows the instruction
+   has a special case with r0,r0 with some instruction operands is understood as
+   the literal value 0, some risc architectures also do this ). So now
+   we are branching to the next address & the address new program counter is
+   in r13,so now we subtract the size of the function prologue we have executed
+   the size of the literal pool to get to the top of the literal pool::
+
+
+     0040037c int test(int b)
+     {                                                     # Function prologue below
+       40037c:  90 de f0 34     stm     %r13,%r14,52(%r15) # Save registers r13 & r14
+       400380:  0d d0           basr    %r13,%r0           # Set up pointer to constant pool using
+       400382:  a7 da ff fa     ahi     %r13,-6            # basr trick
 	return(5+b);
-	                                                   # Huge main program
-  400386:	a7 2a 00 05 	ahi	%r2,5              # add 5 to r2
+							   # Huge main program
+       400386:  a7 2a 00 05     ahi     %r2,5              # add 5 to r2
 
-                                                           # Function epilogue below 
-  40038a:	98 de f0 34 	lm	%r13,%r14,52(%r15) # restore registers r13 & 14
-  40038e:	07 fe       	br	%r14               # return
-}
+							   # Function epilogue below
+       40038a:  98 de f0 34     lm      %r13,%r14,52(%r15) # restore registers r13 & 14
+       40038e:  07 fe           br      %r14               # return
+     }
 
 Comments on the function main
 -----------------------------
-1) The compiler did this function optimally ( 8-) )
+1) The compiler did this function optimally ( 8-) )::
 
-Literal pool for main.
-400390:	ff ff ff ec 	.long 0xffffffec
-main(int argc,char *argv[])
-{                                                          # Function prologue below
-  400394:	90 bf f0 2c 	stm	%r11,%r15,44(%r15) # Save necessary registers
-  400398:	18 0f       	lr	%r0,%r15           # copy stack pointer to r0
-  40039a:	a7 fa ff a0 	ahi	%r15,-96           # Make area for callee saving 
-  40039e:	0d d0       	basr	%r13,%r0           # Set up r13 to point to
-  4003a0:	a7 da ff f0 	ahi	%r13,-16           # literal pool
-  4003a4:	50 00 f0 00 	st	%r0,0(%r15)        # Save backchain
+     Literal pool for main.
+     400390:    ff ff ff ec     .long 0xffffffec
+     main(int argc,char *argv[])
+     {                                                     # Function prologue below
+       400394:  90 bf f0 2c     stm     %r11,%r15,44(%r15) # Save necessary registers
+       400398:  18 0f           lr      %r0,%r15           # copy stack pointer to r0
+       40039a:  a7 fa ff a0     ahi     %r15,-96           # Make area for callee saving
+       40039e:  0d d0           basr    %r13,%r0           # Set up r13 to point to
+       4003a0:  a7 da ff f0     ahi     %r13,-16           # literal pool
+       4003a4:  50 00 f0 00     st      %r0,0(%r15)        # Save backchain
 
 	return(test(5));                                   # Main Program Below
-  4003a8:	58 e0 d0 00 	l	%r14,0(%r13)       # load relative address of test from
-						           # literal pool
-  4003ac:	a7 28 00 05 	lhi	%r2,5              # Set first parameter to 5
-  4003b0:	4d ee d0 00 	bas	%r14,0(%r14,%r13)  # jump to test setting r14 as return
+       4003a8:  58 e0 d0 00     l       %r14,0(%r13)       # load relative address of test from
+							   # literal pool
+       4003ac:  a7 28 00 05     lhi     %r2,5              # Set first parameter to 5
+       4003b0:  4d ee d0 00     bas     %r14,0(%r14,%r13)  # jump to test setting r14 as return
 							   # address using branch & save instruction.
 
 							   # Function Epilogue below
-  4003b4:	98 bf f0 8c 	lm	%r11,%r15,140(%r15)# Restore necessary registers.
-  4003b8:	07 fe       	br	%r14               # return to do program exit 
-}
+       4003b4:  98 bf f0 8c     lm      %r11,%r15,140(%r15)# Restore necessary registers.
+       4003b8:  07 fe           br      %r14               # return to do program exit
+     }
 
 
 Compiler updates
 ----------------
 
-main(int argc,char *argv[])
-{
-  4004fc:	90 7f f0 1c       	stm	%r7,%r15,28(%r15)
-  400500:	a7 d5 00 04       	bras	%r13,400508 <main+0xc>
-  400504:	00 40 04 f4       	.long	0x004004f4 
-  # compiler now puts constant pool in code to so it saves an instruction 
-  400508:	18 0f             	lr	%r0,%r15
-  40050a:	a7 fa ff a0       	ahi	%r15,-96
-  40050e:	50 00 f0 00       	st	%r0,0(%r15)
+::
+
+  main(int argc,char *argv[])
+  {
+    4004fc:     90 7f f0 1c             stm     %r7,%r15,28(%r15)
+    400500:     a7 d5 00 04             bras    %r13,400508 <main+0xc>
+    400504:     00 40 04 f4             .long   0x004004f4
+    # compiler now puts constant pool in code to so it saves an instruction
+    400508:     18 0f                   lr      %r0,%r15
+    40050a:     a7 fa ff a0             ahi     %r15,-96
+    40050e:     50 00 f0 00             st      %r0,0(%r15)
 	return(test(5));
-  400512:	58 10 d0 00       	l	%r1,0(%r13)
-  400516:	a7 28 00 05       	lhi	%r2,5
-  40051a:	0d e1             	basr	%r14,%r1
-  # compiler adds 1 extra instruction to epilogue this is done to
-  # avoid processor pipeline stalls owing to data dependencies on g5 &
-  # above as register 14 in the old code was needed directly after being loaded 
-  # by the lm	%r11,%r15,140(%r15) for the br %14.
-  40051c:	58 40 f0 98       	l	%r4,152(%r15)
-  400520:	98 7f f0 7c       	lm	%r7,%r15,124(%r15)
-  400524:	07 f4             	br	%r4
-}
+    400512:     58 10 d0 00             l       %r1,0(%r13)
+    400516:     a7 28 00 05             lhi     %r2,5
+    40051a:     0d e1                   basr    %r14,%r1
+    # compiler adds 1 extra instruction to epilogue this is done to
+    # avoid processor pipeline stalls owing to data dependencies on g5 &
+    # above as register 14 in the old code was needed directly after being loaded
+    # by the lm %r11,%r15,140(%r15) for the br %14.
+    40051c:     58 40 f0 98             l       %r4,152(%r15)
+    400520:     98 7f f0 7c             lm      %r7,%r15,124(%r15)
+    400524:     07 f4                   br      %r4
+  }
 
 
 Hartmut ( our compiler developer ) also has been threatening to take out the
@@ -709,38 +753,39 @@ have been warned.
 --------------------------------------
 
 If you understand the stuff above you'll understand the stuff
-below too so I'll avoid repeating myself & just say that 
+below too so I'll avoid repeating myself & just say that
 some of the instructions have g's on the end of them to indicate
-they are 64 bit & the stack offsets are a bigger, 
+they are 64 bit & the stack offsets are a bigger,
 the only other difference you'll find between 32 & 64 bit is that
-we now use f4 & f6 for floating point arguments on 64 bit.
-00000000800005b0 <test>:
-int test(int b)
-{
+we now use f4 & f6 for floating point arguments on 64 bit::
+
+  00000000800005b0 <test>:
+  int test(int b)
+  {
 	return(5+b);
-    800005b0:	a7 2a 00 05       	ahi	%r2,5
-    800005b4:	b9 14 00 22       	lgfr	%r2,%r2 # downcast to integer
-    800005b8:	07 fe             	br	%r14
-    800005ba:	07 07             	bcr	0,%r7
+      800005b0: a7 2a 00 05             ahi     %r2,5
+      800005b4: b9 14 00 22             lgfr    %r2,%r2 # downcast to integer
+      800005b8: 07 fe                   br      %r14
+      800005ba: 07 07                   bcr     0,%r7
 
 
-}
+  }
 
-00000000800005bc <main>:
-main(int argc,char *argv[])
-{ 
-    800005bc:	eb bf f0 58 00 24 	stmg	%r11,%r15,88(%r15)
-    800005c2:	b9 04 00 1f       	lgr	%r1,%r15
-    800005c6:	a7 fb ff 60       	aghi	%r15,-160
-    800005ca:	e3 10 f0 00 00 24 	stg	%r1,0(%r15)
+  00000000800005bc <main>:
+  main(int argc,char *argv[])
+  {
+      800005bc: eb bf f0 58 00 24       stmg    %r11,%r15,88(%r15)
+      800005c2: b9 04 00 1f             lgr     %r1,%r15
+      800005c6: a7 fb ff 60             aghi    %r15,-160
+      800005ca: e3 10 f0 00 00 24       stg     %r1,0(%r15)
 	return(test(5));
-    800005d0:	a7 29 00 05       	lghi	%r2,5
-    # brasl allows jumps > 64k & is overkill here bras would do fune
-    800005d4:	c0 e5 ff ff ff ee 	brasl	%r14,800005b0 <test> 
-    800005da:	e3 40 f1 10 00 04 	lg	%r4,272(%r15)
-    800005e0:	eb bf f0 f8 00 04 	lmg	%r11,%r15,248(%r15)
-    800005e6:	07 f4             	br	%r4
-}
+      800005d0: a7 29 00 05             lghi    %r2,5
+      # brasl allows jumps > 64k & is overkill here bras would do fune
+      800005d4: c0 e5 ff ff ff ee       brasl   %r14,800005b0 <test>
+      800005da: e3 40 f1 10 00 04       lg      %r4,272(%r15)
+      800005e0: eb bf f0 f8 00 04       lmg     %r11,%r15,248(%r15)
+      800005e6: 07 f4                   br      %r4
+  }
 
 
 
@@ -749,15 +794,15 @@ Compiling programs for debugging on Linux for s/390 & z/Architecture
 -gdwarf-2 now works it should be considered the default debugging
 format for s/390 & z/Architecture as it is more reliable for debugging
 shared libraries,  normal -g debugging works much better now
-Thanks to the IBM java compiler developers bug reports. 
+Thanks to the IBM java compiler developers bug reports.
 
-This is typically done adding/appending the flags -g or -gdwarf-2 to the 
+This is typically done adding/appending the flags -g or -gdwarf-2 to the
 CFLAGS & LDFLAGS variables Makefile of the program concerned.
 
 If using gdb & you would like accurate displays of registers &
- stack traces compile without optimisation i.e make sure
+stack traces compile without optimisation i.e make sure
 that there is no -O2 or similar on the CFLAGS line of the Makefile &
-the emitted gcc commands, obviously this will produce worse code 
+the emitted gcc commands, obviously this will produce worse code
 ( not advisable for shipment ) but it is an  aid to the debugging process.
 
 This aids debugging because the compiler will copy parameters passed in
@@ -766,7 +811,7 @@ parameters will work, however some larger programs which use inline functions
 will not compile without optimisation.
 
 Debugging with optimisation has since much improved after fixing
-some bugs, please make sure you are using gdb-5.0 or later developed 
+some bugs, please make sure you are using gdb-5.0 or later developed
 after Nov'2000.
 
 
@@ -779,7 +824,7 @@ Notes
 Addresses & values in the VM debugger are always hex never decimal
 Address ranges are of the format <HexValue1>-<HexValue2> or
 <HexValue1>.<HexValue2>
-For example, the address range	0x2000 to 0x3000 can be described as 2000-3000
+For example, the address range  0x2000 to 0x3000 can be described as 2000-3000
 or 2000.1000
 
 The VM Debugger is case insensitive.
@@ -798,27 +843,31 @@ operands are nibble (half byte aligned).
 So if you have an objdump listing by hand, it is quite easy to follow, and if
 you don't have an objdump listing keep a copy of the s/390 Reference Summary
 or alternatively the s/390 principles of operation next to you.
-e.g. even I can guess that 
+e.g. even I can guess that
 0001AFF8' LR    180F        CC 0
-is a ( load register ) lr r0,r15 
+is a ( load register ) lr r0,r15
 
 Also it is very easy to tell the length of a 390 instruction from the 2 most
 significant bits in the instruction (not that this info is really useful except
 if you are trying to make sense of a hexdump of code).
 Here is a table
+
+======================= ==================
 Bits                    Instruction Length
-------------------------------------------
+======================= ==================
 00                          2 Bytes
 01                          4 Bytes
 10                          4 Bytes
 11                          6 Bytes
+======================= ==================
 
 The debugger also displays other useful info on the same line such as the
 addresses being operated on destination addresses of branches & condition codes.
-e.g.  
-00019736' AHI   A7DAFF0E    CC 1
-000198BA' BRC   A7840004 -> 000198C2'   CC 0
-000198CE' STM   900EF068 >> 0FA95E78    CC 2
+e.g.::
+
+  00019736' AHI   A7DAFF0E    CC 1
+  000198BA' BRC   A7840004 -> 000198C2'   CC 0
+  000198CE' STM   900EF068 >> 0FA95E78    CC 2
 
 
 
@@ -826,54 +875,79 @@ Useful VM debugger commands
 ---------------------------
 
 I suppose I'd better mention this before I start
-to list the current active traces do 
-Q TR
+to list the current active traces do::
+
+	Q TR
+
 there can be a maximum of 255 of these per set
 ( more about trace sets later ).
-To stop traces issue a
-TR END.
-To delete a particular breakpoint issue
-TR DEL <breakpoint number>
+
+To stop traces issue a::
+
+	TR END.
+
+To delete a particular breakpoint issue::
+
+	TR DEL <breakpoint number>
 
 The PA1 key drops to CP mode so you can issue debugger commands,
-Doing alt c (on my 3270 console at least ) clears the screen. 
+Doing alt c (on my 3270 console at least ) clears the screen.
+
 hitting b <enter> comes back to the running operating system
 from cp mode ( in our case linux ).
+
 It is typically useful to add shortcuts to your profile.exec file
 if you have one ( this is roughly equivalent to autoexec.bat in DOS ).
-file here are a few from mine.
-/* this gives me command history on issuing f12 */
-set pf12 retrieve 
-/* this continues */
-set pf8 imm b
-/* goes to trace set a */
-set pf1 imm tr goto a
-/* goes to trace set b */
-set pf2 imm tr goto b
-/* goes to trace set c */
-set pf3 imm tr goto c
+file here are a few from mine::
+
+  /* this gives me command history on issuing f12 */
+  set pf12 retrieve
+  /* this continues */
+  set pf8 imm b
+  /* goes to trace set a */
+  set pf1 imm tr goto a
+  /* goes to trace set b */
+  set pf2 imm tr goto b
+  /* goes to trace set c */
+  set pf3 imm tr goto c
 
 
 
 Instruction Tracing
 -------------------
-Setting a simple breakpoint
-TR I PSWA <address>
-To debug a particular function try
-TR I R <function address range>
-TR I on its own will single step.
-TR I DATA <MNEMONIC> <OPTIONAL RANGE> will trace for particular mnemonics
-e.g.
-TR I DATA 4D R 0197BC.4000
+Setting a simple breakpoint::
+
+	TR I PSWA <address>
+
+To debug a particular function try::
+
+  TR I R <function address range>
+  TR I on its own will single step.
+  TR I DATA <MNEMONIC> <OPTIONAL RANGE> will trace for particular mnemonics
+
+e.g.::
+
+  TR I DATA 4D R 0197BC.4000
+
 will trace for BAS'es ( opcode 4D ) in the range 0197BC.4000
+
 if you were inclined you could add traces for all branch instructions &
-suffix them with the run prefix so you would have a backtrace on screen 
-when a program crashes.
-TR BR <INTO OR FROM> will trace branches into or out of an address.
-e.g.
-TR BR INTO 0 is often quite useful if a program is getting awkward & deciding
+suffix them with the run prefix so you would have a backtrace on screen
+when a program crashes::
+
+	TR BR <INTO OR FROM> will trace branches into or out of an address.
+
+e.g.::
+
+	TR BR INTO 0
+
+is often quite useful if a program is getting awkward & deciding
 to branch to 0 & crashing as this will stop at the address before in jumps to 0.
-TR I R <address range> RUN cmd d g
+
+::
+
+	TR I R <address range> RUN cmd d g
+
 single steps a range of addresses but stays running &
 displays the gprs on each step.
 
@@ -881,93 +955,129 @@ displays the gprs on each step.
 
 Displaying & modifying Registers
 --------------------------------
-D G will display all the gprs
-Adding a extra G to all the commands is necessary to access the full 64 bit 
+D G
+	will display all the gprs
+
+Adding a extra G to all the commands is necessary to access the full 64 bit
 content in VM on z/Architecture. Obviously this isn't required for access
 registers as these are still 32 bit.
-e.g. DGG instead of DG 
-D X will display all the control registers
-D AR will display all the access registers
-D AR4-7 will display access registers 4 to 7
-CPU ALL D G will display the GRPS of all CPUS in the configuration
-D PSW will display the current PSW
-st PSW 2000 will put the value 2000 into the PSW &
-cause crash your machine.
-D PREFIX displays the prefix offset
+
+e.g.
+
+DGG
+	instead of DG
+
+D X
+	will display all the control registers
+D AR
+	will display all the access registers
+D AR4-7
+	will display access registers 4 to 7
+CPU ALL D G
+	will display the GRPS of all CPUS in the configuration
+D PSW
+	will display the current PSW
+st PSW 2000
+	will put the value 2000 into the PSW & cause crash your machine.
+D PREFIX
+	displays the prefix offset
 
 
 Displaying Memory
 -----------------
-To display memory mapped using the current PSW's mapping try
-D <range>
+To display memory mapped using the current PSW's mapping try::
+
+   D <range>
+
 To make VM display a message each time it hits a particular address and
-continue try
-D I<range> will disassemble/display a range of instructions.
-ST addr 32 bit word will store a 32 bit aligned address
-D T<range> will display the EBCDIC in an address (if you are that way inclined)
-D R<range> will display real addresses ( without DAT ) but with prefixing.
+continue try:
+
+D I<range>
+	will disassemble/display a range of instructions.
+
+ST addr 32 bit word
+	will store a 32 bit aligned address
+D T<range>
+	will display the EBCDIC in an address (if you are that way inclined)
+D R<range>
+	will display real addresses ( without DAT ) but with prefixing.
+
 There are other complex options to display if you need to get at say home space
 but are in primary space the easiest thing to do is to temporarily
 modify the PSW to the other addressing mode, display the stuff & then
 restore it.
 
 
- 
+
 Hints
 -----
 If you want to issue a debugger command without halting your virtual machine
-with the PA1 key try prefixing the command with #CP e.g.
-#cp tr i pswa 2000
+with the PA1 key try prefixing the command with #CP e.g.::
+
+	#cp tr i pswa 2000
+
 also suffixing most debugger commands with RUN will cause them not
 to stop just display the mnemonic at the current instruction on the console.
+
 If you have several breakpoints you want to put into your program &
 you get fed up of cross referencing with System.map
 you can do the following trick for several symbols.
-grep do_signal System.map 
-which emits the following among other things
-0001f4e0 T do_signal 
-now you can do
 
-TR I PSWA 0001f4e0 cmd msg * do_signal
+::
+
+	grep do_signal System.map
+
+which emits the following among other things::
+
+	0001f4e0 T do_signal
+
+now you can do::
+
+	TR I PSWA 0001f4e0 cmd msg * do_signal
+
 This sends a message to your own console each time do_signal is entered.
 ( As an aside I wrote a perl script once which automatically generated a REXX
 script with breakpoints on every kernel procedure, this isn't a good idea
 because there are thousands of these routines & VM can only set 255 breakpoints
-at a time so you nearly had to spend as long pruning the file down as you would 
+at a time so you nearly had to spend as long pruning the file down as you would
 entering the msgs by hand), however, the trick might be useful for a single
 object file. In the 3270 terminal emulator x3270 there is a very useful option
 in the file menu called "Save Screen In File" - this is very good for keeping a
 copy of traces.
 
-From CMS help <command name> will give you online help on a particular command. 
-e.g. 
-HELP DISPLAY
+From CMS help <command name> will give you online help on a particular command.
+e.g.::
+
+	HELP DISPLAY
 
 Also CP has a file called profile.exec which automatically gets called
 on startup of CMS ( like autoexec.bat ), keeping on a DOS analogy session
 CP has a feature similar to doskey, it may be useful for you to
-use profile.exec to define some keystrokes. 
-e.g.
+use profile.exec to define some keystrokes.
+
 SET PF9 IMM B
-This does a single step in VM on pressing F8. 
+	This does a single step in VM on pressing F8.
+
 SET PF10  ^
-This sets up the ^ key.
-which can be used for ^c (ctrl-c),^z (ctrl-z) which can't be typed directly
-into some 3270 consoles.
+	This sets up the ^ key.
+	which can be used for ^c (ctrl-c),^z (ctrl-z) which can't be typed
+	directly into some 3270 consoles.
+
 SET PF11 ^-
-This types the starting keystrokes for a sysrq see SysRq below.
+	This types the starting keystrokes for a sysrq see SysRq below.
 SET PF12 RETRIEVE
-This retrieves command history on pressing F12.
+	This retrieves command history on pressing F12.
 
 
 Sometimes in VM the display is set up to scroll automatically this
 can be very annoying if there are messages you wish to look at
 to stop this do
+
 TERM MORE 255 255
-This will nearly stop automatic screen updates, however it will
-cause a denial of service if lots of messages go to the 3270 console,
-so it would be foolish to use this as the default on a production machine.
- 
+  This will nearly stop automatic screen updates, however it will
+  cause a denial of service if lots of messages go to the 3270 console,
+  so it would be foolish to use this as the default on a production machine.
+
 
 Tracing particular processes
 ----------------------------
@@ -976,69 +1086,116 @@ very seldom collide with text segments of user programs ( thanks Martin ),
 this simplifies debugging the kernel.
 However it is quite common for user processes to have addresses which collide
 this can make debugging a particular process under VM painful under normal
-circumstances as the process may change when doing a 
-TR I R <address range>.
+circumstances as the process may change when doing a::
+
+	TR I R <address range>.
+
 Thankfully after reading VM's online help I figured out how to debug
 I particular process.
 
 Your first problem is to find the STD ( segment table designation )
 of the program you wish to debug.
 There are several ways you can do this here are a few
-1) objdump --syms <program to be debugged> | grep main
-To get the address of main in the program.
-tr i pswa <address of main>
+
+Run::
+
+	objdump --syms <program to be debugged> | grep main
+
+To get the address of main in the program. Then::
+
+	tr i pswa <address of main>
+
 Start the program, if VM drops to CP on what looks like the entry
 point of the main function this is most likely the process you wish to debug.
 Now do a D X13 or D XG13 on z/Architecture.
-On 31 bit the STD is bits 1-19 ( the STO segment table origin ) 
+
+On 31 bit the STD is bits 1-19 ( the STO segment table origin )
 & 25-31 ( the STL segment table length ) of CR13.
-now type
-TR I R STD <CR13's value> 0.7fffffff
-e.g.
-TR I R STD 8F32E1FF 0.7fffffff
-Another very useful variation is
-TR STORE INTO STD <CR13's value> <address range>
+
+now type::
+
+	TR I R STD <CR13's value> 0.7fffffff
+
+e.g.::
+
+	TR I R STD 8F32E1FF 0.7fffffff
+
+Another very useful variation is::
+
+	TR STORE INTO STD <CR13's value> <address range>
+
 for finding out when a particular variable changes.
 
-An alternative way of finding the STD of a currently running process 
+An alternative way of finding the STD of a currently running process
 is to do the following, ( this method is more complex but
 could be quite convenient if you aren't updating the kernel much &
 so your kernel structures will stay constant for a reasonable period of
 time ).
 
-grep task /proc/<pid>/status
-from this you should see something like
-task: 0f160000 ksp: 0f161de8 pt_regs: 0f161f68
+::
+
+	grep task /proc/<pid>/status
+
+from this you should see something like::
+
+	task: 0f160000 ksp: 0f161de8 pt_regs: 0f161f68
+
 This now gives you a pointer to the task structure.
-Now make CC:="s390-gcc -g" kernel/sched.s
+
+Now make::
+
+	CC:="s390-gcc -g" kernel/sched.s
+
 To get the task_struct stabinfo.
+
 ( task_struct is defined in include/linux/sched.h ).
+
 Now we want to look at
 task->active_mm->pgd
+
 on my machine the active_mm in the task structure stab is
 active_mm:(4,12),672,32
+
 its offset is 672/8=84=0x54
+
 the pgd member in the mm_struct stab is
 pgd:(4,6)=*(29,5),96,32
 so its offset is 96/8=12=0xc
 
-so we'll
-hexdump -s 0xf160054 /dev/mem | more
+so we'll::
+
+	hexdump -s 0xf160054 /dev/mem | more
+
 i.e. task_struct+active_mm offset
-to look at the active_mm member
-f160054 0fee cc60 0019 e334 0000 0000 0000 0011
-hexdump -s 0x0feecc6c /dev/mem | more
-i.e. active_mm+pgd offset
-feecc6c 0f2c 0000 0000 0001 0000 0001 0000 0010
+to look at the active_mm member::
+
+	f160054 0fee cc60 0019 e334 0000 0000 0000 0011
+
+::
+
+	hexdump -s 0x0feecc6c /dev/mem | more
+
+i.e. active_mm+pgd offset::
+
+	feecc6c 0f2c 0000 0000 0001 0000 0001 0000 0010
+
 we get something like
-now do 
-TR I R STD <pgd|0x7f> 0.7fffffff
+now do::
+
+	TR I R STD <pgd|0x7f> 0.7fffffff
+
 i.e. the 0x7f is added because the pgd only
 gives the page table origin & we need to set the low bits
 to the maximum possible segment table length.
-TR I R STD 0f2c007f 0.7fffffff
-on z/Architecture you'll probably need to do
-TR I R STD <pgd|0x7> 0.ffffffffffffffff
+
+::
+
+	TR I R STD 0f2c007f 0.7fffffff
+
+on z/Architecture you'll probably need to do::
+
+	TR I R STD <pgd|0x7> 0.ffffffffffffffff
+
 to set the TableType to 0x1 & the Table length to 3.
 
 
@@ -1051,40 +1208,51 @@ You can restart linux & trace these using the tr prog <range or value> trace
 option.
 
 
-The most common ones you will normally be tracing for is
-1=operation exception
-2=privileged operation exception
-4=protection exception
-5=addressing exception
-6=specification exception
-10=segment translation exception
-11=page translation exception
+The most common ones you will normally be tracing for is:
+
+- 1=operation exception
+- 2=privileged operation exception
+- 4=protection exception
+- 5=addressing exception
+- 6=specification exception
+- 10=segment translation exception
+- 11=page translation exception
 
 The full list of these is on page 22 of the current s/390 Reference Summary.
 e.g.
+
 tr prog 10 will trace segment translation exceptions.
+
 tr prog on its own will trace all program interruption codes.
 
 Trace Sets
 ----------
 On starting VM you are initially in the INITIAL trace set.
 You can do a Q TR to verify this.
-If you have a complex tracing situation where you wish to wait for instance 
+If you have a complex tracing situation where you wish to wait for instance
 till a driver is open before you start tracing IO, but know in your
 heart that you are going to have to make several runs through the code till you
-have a clue whats going on. 
+have a clue whats going on.
+
+What you can do is::
+
+	TR I PSWA <Driver open address>
 
-What you can do is
-TR I PSWA <Driver open address>
 hit b to continue till breakpoint
+
 reach the breakpoint
-now do your
-TR GOTO B 
-TR IO 7c08-7c09 inst int run 
+
+now do your::
+
+	TR GOTO B
+	TR IO 7c08-7c09 inst int run
+
 or whatever the IO channels you wish to trace are & hit b
 
-To got back to the initial trace set do
-TR GOTO INITIAL
+To got back to the initial trace set do::
+
+	TR GOTO INITIAL
+
 & the TR I PSWA <Driver open address> will be the only active breakpoint again.
 
 
@@ -1093,11 +1261,14 @@ Tracing linux syscalls under VM
 Syscalls are implemented on Linux for S390 by the Supervisor call instruction
 (SVC). There 256 possibilities of these as the instruction is made up of a 0xA
 opcode and the second byte being the syscall number. They are traced using the
-simple command:
-TR SVC  <Optional value or range>
+simple command::
+
+	TR SVC  <Optional value or range>
+
 the syscalls are defined in linux/arch/s390/include/asm/unistd.h
-e.g. to trace all file opens just do
-TR SVC 5 ( as this is the syscall number of open )
+e.g. to trace all file opens just do::
+
+	TR SVC 5 ( as this is the syscall number of open )
 
 
 SMP Specific commands
@@ -1105,33 +1276,51 @@ SMP Specific commands
 To find out how many cpus you have
 Q CPUS displays all the CPU's available to your virtual machine
 To find the cpu that the current cpu VM debugger commands are being directed at
-do Q CPU to change the current cpu VM debugger commands are being directed at do
-CPU <desired cpu no>
+do Q CPU to change the current cpu VM debugger commands are being directed at
+do::
+
+	CPU <desired cpu no>
 
 On a SMP guest issue a command to all CPUs try prefixing the command with cpu
-all. To issue a command to a particular cpu try cpu <cpu number> e.g.
-CPU 01 TR I R 2000.3000
+all. To issue a command to a particular cpu try cpu <cpu number> e.g.::
+
+	CPU 01 TR I R 2000.3000
+
 If you are running on a guest with several cpus & you have a IO related problem
 & cannot follow the flow of code but you know it isn't smp related.
-from the bash prompt issue
-shutdown -h now or halt.
-do a Q CPUS to find out how many cpus you have
-detach each one of them from cp except cpu 0 
-by issuing a 
-DETACH CPU 01-(number of cpus in configuration)
+
+from the bash prompt issue::
+
+	shutdown -h now or halt.
+
+do a::
+
+	Q CPUS
+
+to find out how many cpus you have detach each one of them from cp except
+cpu 0 by issuing a::
+
+	DETACH CPU 01-(number of cpus in configuration)
+
 & boot linux again.
-TR SIGP will trace inter processor signal processor instructions.
-DEFINE CPU 01-(number in configuration) 
-will get your guests cpus back.
+
+TR SIGP
+	will trace inter processor signal processor instructions.
+
+DEFINE CPU 01-(number in configuration)
+	will get your guests cpus back.
 
 
 Help for displaying ascii textstrings
 -------------------------------------
 On the very latest VM Nucleus'es VM can now display ascii
-( thanks Neale for the hint ) by doing
-D TX<lowaddr>.<len>
-e.g.
-D TX0.100
+( thanks Neale for the hint ) by doing::
+
+	D TX<lowaddr>.<len>
+
+e.g.::
+
+	D TX0.100
 
 Alternatively
 =============
@@ -1143,66 +1332,85 @@ to your xterm if you are debugging from a linuxbox.
 This is quite useful when looking at a parameter passed in as a text string
 under VM ( unless you are good at decoding ASCII in your head ).
 
-e.g. consider tracing an open syscall
-TR SVC 5
-We have stopped at a breakpoint
-000151B0' SVC   0A05     -> 0001909A'   CC 0
+e.g. consider tracing an open syscall::
+
+	TR SVC 5
+
+We have stopped at a breakpoint::
+
+	000151B0' SVC   0A05     -> 0001909A'   CC 0
 
 D 20.8 to check the SVC old psw in the prefix area and see was it from userspace
 (for the layout of the prefix area consult the "Fixed Storage Locations"
 chapter of the s/390 Reference Summary if you have it available).
-V00000020  070C2000 800151B2
+
+::
+
+  V00000020  070C2000 800151B2
+
 The problem state bit wasn't set &  it's also too early in the boot sequence
-for it to be a userspace SVC if it was we would have to temporarily switch the 
+for it to be a userspace SVC if it was we would have to temporarily switch the
 psw to user space addressing so we could get at the first parameter of the open
 in gpr2.
-Next do a 
-D G2
-GPR  2 =  00014CB4
-Now display what gpr2 is pointing to
-D 00014CB4.20
-V00014CB4  2F646576 2F636F6E 736F6C65 00001BF5
-V00014CC4  FC00014C B4001001 E0001000 B8070707
+
+Next do a::
+
+	D G2
+	GPR  2 =  00014CB4
+
+Now display what gpr2 is pointing to::
+
+	D 00014CB4.20
+	V00014CB4  2F646576 2F636F6E 736F6C65 00001BF5
+	V00014CC4  FC00014C B4001001 E0001000 B8070707
+
 Now copy the text till the first 00 hex ( which is the end of the string
-to an xterm & do hex2ascii on it.
-hex2ascii 2F646576 2F636F6E 736F6C65 00 
-outputs
-Decoded Hex:=/ d e v / c o n s o l e 0x00 
+to an xterm & do hex2ascii on it::
+
+	hex2ascii 2F646576 2F636F6E 736F6C65 00
+
+outputs::
+
+	Decoded Hex:=/ d e v / c o n s o l e 0x00
+
 We were opening the console device,
 
 You can compile the code below yourself for practice :-),
-/*
- *    hex2ascii.c
- *    a useful little tool for converting a hexadecimal command line to ascii
- *
- *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
- *    (C) 2000 IBM Deutschland Entwicklung GmbH, IBM Corporation.
- */   
-#include <stdio.h>
 
-int main(int argc,char *argv[])
-{
-  int cnt1,cnt2,len,toggle=0;
-  int startcnt=1;
-  unsigned char c,hex;
-  
-  if(argc>1&&(strcmp(argv[1],"-a")==0))
-     startcnt=2;
-  printf("Decoded Hex:=");
-  for(cnt1=startcnt;cnt1<argc;cnt1++)
+::
+
+  /*
+   *    hex2ascii.c
+   *    a useful little tool for converting a hexadecimal command line to ascii
+   *
+   *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
+   *    (C) 2000 IBM Deutschland Entwicklung GmbH, IBM Corporation.
+   */
+  #include <stdio.h>
+
+  int main(int argc,char *argv[])
   {
-    len=strlen(argv[cnt1]);
-    for(cnt2=0;cnt2<len;cnt2++)
+    int cnt1,cnt2,len,toggle=0;
+    int startcnt=1;
+    unsigned char c,hex;
+
+    if(argc>1&&(strcmp(argv[1],"-a")==0))
+       startcnt=2;
+    printf("Decoded Hex:=");
+    for(cnt1=startcnt;cnt1<argc;cnt1++)
     {
-       c=argv[cnt1][cnt2];
-       if(c>='0'&&c<='9')
+      len=strlen(argv[cnt1]);
+      for(cnt2=0;cnt2<len;cnt2++)
+      {
+	 c=argv[cnt1][cnt2];
+	 if(c>='0'&&c<='9')
 	  c=c-'0';
-       if(c>='A'&&c<='F')
+	 if(c>='A'&&c<='F')
 	  c=c-'A'+10;
-       if(c>='a'&&c<='f')
+	 if(c>='a'&&c<='f')
 	  c=c-'a'+10;
-       switch(toggle)
-       {
+	 switch(toggle)
+	 {
 	  case 0:
 	     hex=c<<4;
 	     toggle=1;
@@ -1224,11 +1432,11 @@ int main(int argc,char *argv[])
 	     }
 	     toggle=0;
 	  break;
-       }
+	 }
+      }
     }
+    printf("\n");
   }
-  printf("\n");
-}
 
 
 
@@ -1248,48 +1456,58 @@ should be able to sniff further back if you follow the following tricks.
 1) A kernel address should be easy to recognise since it is in
 primary space & the problem state bit isn't set & also
 The Hi bit of the address is set.
-2) Another backchain should also be easy to recognise since it is an 
+2) Another backchain should also be easy to recognise since it is an
 address pointing to another address approximately 100 bytes or 0x70 hex
 behind the current stackpointer.
 
 
 Here is some practice.
+
 boot the kernel & hit PA1 at some random time
-d g to display the gprs, this should display something like
-GPR  0 =  00000001  00156018  0014359C  00000000
-GPR  4 =  00000001  001B8888  000003E0  00000000
-GPR  8 =  00100080  00100084  00000000  000FE000
-GPR 12 =  00010400  8001B2DC  8001B36A  000FFED8
+
+d g to display the gprs, this should display something like::
+
+  GPR  0 =  00000001  00156018  0014359C  00000000
+  GPR  4 =  00000001  001B8888  000003E0  00000000
+  GPR  8 =  00100080  00100084  00000000  000FE000
+  GPR 12 =  00010400  8001B2DC  8001B36A  000FFED8
+
 Note that GPR14 is a return address but as we are real men we are going to
 trace the stack.
-display 0x40 bytes after the stack pointer.
+display 0x40 bytes after the stack pointer::
 
-V000FFED8  000FFF38 8001B838 80014C8E 000FFF38
-V000FFEE8  00000000 00000000 000003E0 00000000
-V000FFEF8  00100080 00100084 00000000 000FE000
-V000FFF08  00010400 8001B2DC 8001B36A 000FFED8
+  V000FFED8  000FFF38 8001B838 80014C8E 000FFF38
+  V000FFEE8  00000000 00000000 000003E0 00000000
+  V000FFEF8  00100080 00100084 00000000 000FE000
+  V000FFF08  00010400 8001B2DC 8001B36A 000FFED8
 
 
 Ah now look at whats in sp+56 (sp+0x38) this is 8001B36A our saved r14 if
 you look above at our stackframe & also agrees with GPR14.
 
-now backchain 
-d 000FFF38.40
-we now are taking the contents of SP to get our first backchain.
+now backchain::
 
-V000FFF38  000FFFA0 00000000 00014995 00147094
-V000FFF48  00147090 001470A0 000003E0 00000000
-V000FFF58  00100080 00100084 00000000 001BF1D0
-V000FFF68  00010400 800149BA 80014CA6 000FFF38
+	d 000FFF38.40
+
+we now are taking the contents of SP to get our first backchain::
+
+  V000FFF38  000FFFA0 00000000 00014995 00147094
+  V000FFF48  00147090 001470A0 000003E0 00000000
+  V000FFF58  00100080 00100084 00000000 001BF1D0
+  V000FFF68  00010400 800149BA 80014CA6 000FFF38
 
 This displays a 2nd return address of 80014CA6
 
-now do d 000FFFA0.40 for our 3rd backchain
+now do::
 
-V000FFFA0  04B52002 0001107F 00000000 00000000
-V000FFFB0  00000000 00000000 FF000000 0001107F
-V000FFFC0  00000000 00000000 00000000 00000000
-V000FFFD0  00010400 80010802 8001085A 000FFFA0
+	d 000FFFA0.40
+
+for our 3rd backchain::
+
+  V000FFFA0  04B52002 0001107F 00000000 00000000
+  V000FFFB0  00000000 00000000 FF000000 0001107F
+  V000FFFC0  00000000 00000000 00000000 00000000
+  V000FFFD0  00010400 80010802 8001085A 000FFFA0
 
 
 our 3rd return address is 8001085A
@@ -1297,23 +1515,35 @@ our 3rd return address is 8001085A
 as the 04B52002 looks suspiciously like rubbish it is fair to assume that the
 kernel entry routines for the sake of optimisation don't set up a backchain.
 
-now look at System.map to see if the addresses make any sense.
+now look at System.map to see if the addresses make any sense::
+
+	grep -i 0001b3 System.map
+
+outputs among other things::
+
+	0001b304 T cpu_idle
 
-grep -i 0001b3 System.map
-outputs among other things
-0001b304 T cpu_idle 
 so 8001B36A
 is cpu_idle+0x66 ( quiet the cpu is asleep, don't wake it )
 
+::
+
+	grep -i 00014 System.map
+
+produces among other things::
+
+	00014a78 T start_kernel
 
-grep -i 00014 System.map 
-produces among other things
-00014a78 T start_kernel  
 so 0014CA6 is start_kernel+some hex number I can't add in my head.
 
-grep -i 00108 System.map 
-this produces
-00010800 T _stext
+::
+
+	grep -i 00108 System.map
+
+this produces::
+
+	00010800 T _stext
+
 so   8001085A is _stext+0x5a
 
 Congrats you've done your first backchain.
@@ -1337,47 +1567,49 @@ system might be choking with around 64.
 Here is some of the common IO terminology:
 
 Subchannel:
-This is the logical number most IO commands use to talk to an IO device. There
-can be up to 0x10000 (65536) of these in a configuration, typically there are a
-few hundred. Under VM for simplicity they are allocated contiguously, however
-on the native hardware they are not. They typically stay consistent between
-boots provided no new hardware is inserted or removed.
-Under Linux for s390 we use these as IRQ's and also when issuing an IO command
-(CLEAR SUBCHANNEL, HALT SUBCHANNEL, MODIFY SUBCHANNEL, RESUME SUBCHANNEL,
-START SUBCHANNEL, STORE SUBCHANNEL and TEST SUBCHANNEL). We use this as the ID
-of the device we wish to talk to. The most important of these instructions are
-START SUBCHANNEL (to start IO), TEST SUBCHANNEL (to check whether the IO
-completed successfully) and HALT SUBCHANNEL (to kill IO). A subchannel can have
-up to 8 channel paths to a device, this offers redundancy if one is not
-available.
+  This is the logical number most IO commands use to talk to an IO device. There
+  can be up to 0x10000 (65536) of these in a configuration, typically there are a
+  few hundred. Under VM for simplicity they are allocated contiguously, however
+  on the native hardware they are not. They typically stay consistent between
+  boots provided no new hardware is inserted or removed.
+
+  Under Linux for s390 we use these as IRQ's and also when issuing an IO command
+  (CLEAR SUBCHANNEL, HALT SUBCHANNEL, MODIFY SUBCHANNEL, RESUME SUBCHANNEL,
+  START SUBCHANNEL, STORE SUBCHANNEL and TEST SUBCHANNEL). We use this as the ID
+  of the device we wish to talk to. The most important of these instructions are
+  START SUBCHANNEL (to start IO), TEST SUBCHANNEL (to check whether the IO
+  completed successfully) and HALT SUBCHANNEL (to kill IO). A subchannel can have
+  up to 8 channel paths to a device, this offers redundancy if one is not
+  available.
 
 Device Number:
-This number remains static and is closely tied to the hardware. There are 65536
-of these, made up of a CHPID (Channel Path ID, the most significant 8 bits) and
-another lsb 8 bits. These remain static even if more devices are inserted or
-removed from the hardware. There is a 1 to 1 mapping between subchannels and
-device numbers, provided devices aren't inserted or removed.
+  This number remains static and is closely tied to the hardware. There are 65536
+  of these, made up of a CHPID (Channel Path ID, the most significant 8 bits) and
+  another lsb 8 bits. These remain static even if more devices are inserted or
+  removed from the hardware. There is a 1 to 1 mapping between subchannels and
+  device numbers, provided devices aren't inserted or removed.
 
 Channel Control Words:
-CCWs are linked lists of instructions initially pointed to by an operation
-request block (ORB), which is initially given to Start Subchannel (SSCH)
-command along with the subchannel number for the IO subsystem to process
-while the CPU continues executing normal code.
-CCWs come in two flavours, Format 0 (24 bit for backward compatibility) and
-Format 1 (31 bit). These are typically used to issue read and write (and many
-other) instructions. They consist of a length field and an absolute address
-field.
-Each IO typically gets 1 or 2 interrupts, one for channel end (primary status)
-when the channel is idle, and the second for device end (secondary status).
-Sometimes you get both concurrently. You check how the IO went on by issuing a
-TEST SUBCHANNEL at each interrupt, from which you receive an Interruption
-response block (IRB). If you get channel and device end status in the IRB
-without channel checks etc. your IO probably went okay. If you didn't you
-probably need to examine the IRB, extended status word etc.
-If an error occurs, more sophisticated control units have a facility known as
-concurrent sense. This means that if an error occurs Extended sense information
-will be presented in the Extended status word in the IRB. If not you have to
-issue a subsequent SENSE CCW command after the test subchannel.
+  CCWs are linked lists of instructions initially pointed to by an operation
+  request block (ORB), which is initially given to Start Subchannel (SSCH)
+  command along with the subchannel number for the IO subsystem to process
+  while the CPU continues executing normal code.
+  CCWs come in two flavours, Format 0 (24 bit for backward compatibility) and
+  Format 1 (31 bit). These are typically used to issue read and write (and many
+  other) instructions. They consist of a length field and an absolute address
+  field.
+
+  Each IO typically gets 1 or 2 interrupts, one for channel end (primary status)
+  when the channel is idle, and the second for device end (secondary status).
+  Sometimes you get both concurrently. You check how the IO went on by issuing a
+  TEST SUBCHANNEL at each interrupt, from which you receive an Interruption
+  response block (IRB). If you get channel and device end status in the IRB
+  without channel checks etc. your IO probably went okay. If you didn't you
+  probably need to examine the IRB, extended status word etc.
+  If an error occurs, more sophisticated control units have a facility known as
+  concurrent sense. This means that if an error occurs Extended sense information
+  will be presented in the Extended status word in the IRB. If not you have to
+  issue a subsequent SENSE CCW command after the test subchannel.
 
 
 TPI (Test pending interrupt) can also be used for polled IO, but in
@@ -1388,58 +1620,62 @@ Store Subchannel and Modify Subchannel can be used to examine and modify
 operating characteristics of a subchannel (e.g. channel paths).
 
 Other IO related Terms:
-Sysplex: S390's Clustering Technology
-QDIO: S390's new high speed IO architecture to support devices such as gigabit
-ethernet, this architecture is also designed to be forward compatible with
-upcoming 64 bit machines.
 
+Sysplex:
+  S390's Clustering Technology
+QDIO:
+  S390's new high speed IO architecture to support devices such as gigabit
+  ethernet, this architecture is also designed to be forward compatible with
+  upcoming 64 bit machines.
 
-General Concepts 
+
+General Concepts
+----------------
 
 Input Output Processors (IOP's) are responsible for communicating between
 the mainframe CPU's & the channel & relieve the mainframe CPU's from the
-burden of communicating with IO devices directly, this allows the CPU's to 
-concentrate on data processing. 
+burden of communicating with IO devices directly, this allows the CPU's to
+concentrate on data processing.
 
-IOP's can use one or more links ( known as channel paths ) to talk to each 
+IOP's can use one or more links ( known as channel paths ) to talk to each
 IO device. It first checks for path availability & chooses an available one,
 then starts ( & sometimes terminates IO ).
 There are two types of channel path: ESCON & the Parallel IO interface.
 
 IO devices are attached to control units, control units provide the
-logic to interface the channel paths & channel path IO protocols to 
+logic to interface the channel paths & channel path IO protocols to
 the IO devices, they can be integrated with the devices or housed separately
-& often talk to several similar devices ( typical examples would be raid 
-controllers or a control unit which connects to 1000 3270 terminals ).
+& often talk to several similar devices ( typical examples would be raid
+controllers or a control unit which connects to 1000 3270 terminals )::
 
 
-    +---------------------------------------------------------------+
-    | +-----+ +-----+ +-----+ +-----+  +----------+  +----------+   |
-    | | CPU | | CPU | | CPU | | CPU |  |  Main    |  | Expanded |   |
-    | |     | |     | |     | |     |  |  Memory  |  |  Storage |   |
-    | +-----+ +-----+ +-----+ +-----+  +----------+  +----------+   | 
-    |---------------------------------------------------------------+
-    |   IOP        |      IOP      |       IOP                      |
-    |---------------------------------------------------------------
-    | C | C | C | C | C | C | C | C | C | C | C | C | C | C | C | C | 
-    ----------------------------------------------------------------
-         ||                                              ||
-         ||  Bus & Tag Channel Path                      || ESCON
-         ||  ======================                      || Channel
-         ||  ||                  ||                      || Path
-    +----------+               +----------+         +----------+
-    |          |               |          |         |          |
-    |    CU    |               |    CU    |         |    CU    |
-    |          |               |          |         |          |
-    +----------+               +----------+         +----------+
-       |      |                     |                |       |
-+----------+ +----------+      +----------+   +----------+ +----------+
-|I/O Device| |I/O Device|      |I/O Device|   |I/O Device| |I/O Device|
-+----------+ +----------+      +----------+   +----------+ +----------+
-  CPU = Central Processing Unit    
-  C = Channel                      
-  IOP = IP Processor               
-  CU = Control Unit
+      +---------------------------------------------------------------+
+      | +-----+ +-----+ +-----+ +-----+  +----------+  +----------+   |
+      | | CPU | | CPU | | CPU | | CPU |  |  Main    |  | Expanded |   |
+      | |     | |     | |     | |     |  |  Memory  |  |  Storage |   |
+      | +-----+ +-----+ +-----+ +-----+  +----------+  +----------+   |
+      |---------------------------------------------------------------+
+      |   IOP        |      IOP      |       IOP                      |
+      |---------------------------------------------------------------
+      | C | C | C | C | C | C | C | C | C | C | C | C | C | C | C | C |
+      ----------------------------------------------------------------
+	   ||                                              ||
+	   ||  Bus & Tag Channel Path                      || ESCON
+	   ||  ======================                      || Channel
+	   ||  ||                  ||                      || Path
+      +----------+               +----------+         +----------+
+      |          |               |          |         |          |
+      |    CU    |               |    CU    |         |    CU    |
+      |          |               |          |         |          |
+      +----------+               +----------+         +----------+
+	 |      |                     |                |       |
+  +----------+ +----------+      +----------+   +----------+ +----------+
+  |I/O Device| |I/O Device|      |I/O Device|   |I/O Device| |I/O Device|
+  +----------+ +----------+      +----------+   +----------+ +----------+
+    CPU = Central Processing Unit
+    C = Channel
+    IOP = IP Processor
+    CU = Control Unit
 
 The 390 IO systems come in 2 flavours the current 390 machines support both
 
@@ -1447,7 +1683,7 @@ The Older 360 & 370 Interface,sometimes called the Parallel I/O interface,
 sometimes called Bus-and Tag & sometimes Original Equipment Manufacturers
 Interface (OEMI).
 
-This byte wide Parallel channel path/bus has parity & data on the "Bus" cable 
+This byte wide Parallel channel path/bus has parity & data on the "Bus" cable
 and control lines on the "Tag" cable. These can operate in byte multiplex mode
 for sharing between several slow devices or burst mode and monopolize the
 channel for the whole burst. Up to 256 devices can be addressed on one of these
@@ -1459,13 +1695,13 @@ support only transfer rates of 3.0, 2.0 & 1.0 MB/sec.
 One of these paths can be daisy chained to up to 8 control units.
 
 
-ESCON if fibre optic it is also called FICON 
+ESCON if fibre optic it is also called FICON
 Was introduced by IBM in 1990. Has 2 fibre optic cables and uses either leds or
 lasers for communication at a signaling rate of up to 200 megabits/sec. As
 10bits are transferred for every 8 bits info this drops to 160 megabits/sec
 and to 18.6 Megabytes/sec once control info and CRC are added. ESCON only
 operates in burst mode.
- 
+
 ESCONs typical max cable length is 3km for the led version and 20km for the
 laser version known as XDF (extended distance facility). This can be further
 extended by using an ESCON director which triples the above mentioned ranges.
@@ -1489,31 +1725,29 @@ Debugging IO on s/390 & z/Architecture under VM
 
 Now we are ready to go on with IO tracing commands under VM
 
-A few self explanatory queries:
-Q OSA
-Q CTC
-Q DISK ( This command is CMS specific )
-Q DASD
+A few self explanatory queries::
 
+	Q OSA
+	Q CTC
+	Q DISK ( This command is CMS specific )
+	Q DASD
 
+Q OSA on my machine returns::
 
-
-
-
-Q OSA on my machine returns
-OSA  7C08 ON OSA   7C08 SUBCHANNEL = 0000
-OSA  7C09 ON OSA   7C09 SUBCHANNEL = 0001
-OSA  7C14 ON OSA   7C14 SUBCHANNEL = 0002
-OSA  7C15 ON OSA   7C15 SUBCHANNEL = 0003
+	OSA  7C08 ON OSA   7C08 SUBCHANNEL = 0000
+	OSA  7C09 ON OSA   7C09 SUBCHANNEL = 0001
+	OSA  7C14 ON OSA   7C14 SUBCHANNEL = 0002
+	OSA  7C15 ON OSA   7C15 SUBCHANNEL = 0003
 
 If you have a guest with certain privileges you may be able to see devices
 which don't belong to you. To avoid this, add the option V.
-e.g.
-Q V OSA
+e.g.::
+
+	Q V OSA
 
 Now using the device numbers returned by this command we will
 Trace the io starting up on the first device 7c08 & 7c09
-In our simplest case we can trace the 
+In our simplest case we can trace the
 start subchannels
 like TR SSCH 7C08-7C09
 or the halt subchannels
@@ -1524,34 +1758,47 @@ A good trick is tracing all the IO's and CCWS and spooling them into the reader
 of another VM guest so he can ftp the logfile back to his own machine. I'll do
 a small bit of this and give you a look at the output.
 
-1) Spool stdout to VM reader
-SP PRT TO (another vm guest ) or * for the local vm guest
-2) Fill the reader with the trace
-TR IO 7c08-7c09 INST INT CCW PRT RUN
-3) Start up linux 
-i 00c  
-4) Finish the trace
-TR END
-5) close the reader
-C PRT
-6) list reader contents
-RDRLIST
-7) copy it to linux4's minidisk 
-RECEIVE / LOG TXT A1 ( replace
+1) Spool stdout to VM reader::
+
+	SP PRT TO (another vm guest ) or * for the local vm guest
+
+2) Fill the reader with the trace::
+
+	TR IO 7c08-7c09 INST INT CCW PRT RUN
+
+3) Start up linux::
+
+	i 00c
+4) Finish the trace::
+
+	TR END
+
+5) close the reader::
+
+	C PRT
+
+6) list reader contents::
+
+	RDRLIST
+
+7) copy it to linux4's minidisk::
+
+	RECEIVE / LOG TXT A1 ( replace
+
 8)
 filel & press F11 to look at it
-You should see something like:
+You should see something like::
 
-00020942' SSCH  B2334000    0048813C    CC 0    SCH 0000    DEV 7C08
-          CPA 000FFDF0   PARM 00E2C9C4    KEY 0  FPI C0  LPM 80
-          CCW    000FFDF0  E4200100 00487FE8   0000  E4240100 ........
-          IDAL                                      43D8AFE8
-          IDAL                                      0FB76000
-00020B0A'   I/O DEV 7C08 -> 000197BC'   SCH 0000   PARM 00E2C9C4
-00021628' TSCH  B2354000 >> 00488164    CC 0    SCH 0000    DEV 7C08
-          CCWA 000FFDF8   DEV STS 0C  SCH STS 00  CNT 00EC
-           KEY 0   FPI C0  CC 0   CTLS 4007
-00022238' STSCH B2344000 >> 00488108    CC 0    SCH 0000    DEV 7C08
+  00020942' SSCH  B2334000    0048813C    CC 0    SCH 0000    DEV 7C08
+	    CPA 000FFDF0   PARM 00E2C9C4    KEY 0  FPI C0  LPM 80
+	    CCW    000FFDF0  E4200100 00487FE8   0000  E4240100 ........
+	    IDAL                                      43D8AFE8
+	    IDAL                                      0FB76000
+  00020B0A'   I/O DEV 7C08 -> 000197BC'   SCH 0000   PARM 00E2C9C4
+  00021628' TSCH  B2354000 >> 00488164    CC 0    SCH 0000    DEV 7C08
+	    CCWA 000FFDF8   DEV STS 0C  SCH STS 00  CNT 00EC
+	     KEY 0   FPI C0  CC 0   CTLS 4007
+  00022238' STSCH B2344000 >> 00488108    CC 0    SCH 0000    DEV 7C08
 
 If you don't like messing up your readed ( because you possibly booted from it )
 you can alternatively spool it to another readers guest.
@@ -1563,43 +1810,58 @@ These commands are listed only because they have
 been of use to me in the past & may be of use to
 you too. For more complete info on each of the commands
 use type HELP <command> from CMS.
-detaching devices
-DET <devno range>
-ATT <devno range> <guest> 
+
+detaching devices::
+
+	DET <devno range>
+	ATT <devno range> <guest>
+
 attach a device to guest * for your own guest
-READY <devno> cause VM to issue a fake interrupt.
 
-The VARY command is normally only available to VM administrators.
-VARY ON PATH <path> TO <devno range>
-VARY OFF PATH <PATH> FROM <devno range>
+READY <devno>
+	cause VM to issue a fake interrupt.
+
+The VARY command is normally only available to VM administrators::
+
+	VARY ON PATH <path> TO <devno range>
+	VARY OFF PATH <PATH> FROM <devno range>
+
 This is used to switch on or off channel paths to devices.
 
 Q CHPID <channel path ID>
-This displays state of devices using this channel path
+   This displays state of devices using this channel path
+
 D SCHIB <subchannel>
-This displays the subchannel information SCHIB block for the device.
-this I believe is also only available to administrators.
+   This displays the subchannel information SCHIB block for the device.
+   this I believe is also only available to administrators.
+
 DEFINE CTC <devno>
-defines a virtual CTC channel to channel connection
-2 need to be defined on each guest for the CTC driver to use.
+  defines a virtual CTC channel to channel connection
+  2 need to be defined on each guest for the CTC driver to use.
+
 COUPLE  devno userid remote devno
-Joins a local virtual device to a remote virtual device
-( commonly used for the CTC driver ).
+  Joins a local virtual device to a remote virtual device
+  ( commonly used for the CTC driver ).
+
+Building a VM ramdisk under CMS which linux can use::
+
+	def vfb-<blocksize> <subchannel> <number blocks>
 
-Building a VM ramdisk under CMS which linux can use
-def vfb-<blocksize> <subchannel> <number blocks>
 blocksize is commonly 4096 for linux.
-Formatting it
-format <subchannel> <driver letter e.g. x> (blksize <blocksize>
 
-Sharing a disk between multiple guests
-LINK userid devno1 devno2 mode password
+Formatting it::
+
+	format <subchannel> <driver letter e.g. x> (blksize <blocksize>
+
+Sharing a disk between multiple guests::
+
+	LINK userid devno1 devno2 mode password
 
 
 
 GDB on S390
 ===========
-N.B. if compiling for debugging gdb works better without optimisation 
+N.B. if compiling for debugging gdb works better without optimisation
 ( see Compiling programs for debugging )
 
 invocation
@@ -1609,113 +1871,169 @@ gdb <victim program> <optional corefile>
 Online help
 -----------
 help: gives help on commands
-e.g.
-help
-help display
+
+e.g.::
+
+	help
+	help display
+
 Note gdb's online help is very good use it.
 
 
 Assembly
 --------
-info registers: displays registers other than floating point.
-info all-registers: displays floating points as well.
-disassemble: disassembles
-e.g.
-disassemble without parameters will disassemble the current function
-disassemble $pc $pc+10 
+info registers:
+  displays registers other than floating point.
+
+info all-registers:
+  displays floating points as well.
+
+disassemble:
+  disassembles
+
+e.g.::
+
+	disassemble without parameters will disassemble the current function
+	disassemble $pc $pc+10
 
 Viewing & modifying variables
 -----------------------------
-print or p: displays variable or register
+print or p:
+  displays variable or register
+
 e.g. p/x $sp will display the stack pointer
 
-display: prints variable or register each time program stops
-e.g.
-display/x $pc will display the program counter
-display argc
+display:
+  prints variable or register each time program stops
 
-undisplay : undo's display's
+e.g.::
 
-info breakpoints: shows all current breakpoints
+	display/x $pc will display the program counter
+	display argc
 
-info stack: shows stack back trace (if this doesn't work too well, I'll show
-you the stacktrace by hand below).
+undisplay:
+  undo's display's
 
-info locals: displays local variables.
+info breakpoints:
+  shows all current breakpoints
 
-info args: display current procedure arguments.
+info stack:
+  shows stack back trace (if this doesn't work too well, I'll show
+  you the stacktrace by hand below).
 
-set args: will set argc & argv each time the victim program is invoked.
+info locals:
+  displays local variables.
 
-set <variable>=value
-set argc=100
-set $pc=0
+info args:
+  display current procedure arguments.
+
+set args:
+  will set argc & argv each time the victim program is invoked
+
+e.g.::
+
+	set <variable>=value
+	set argc=100
+	set $pc=0
 
 
 
 Modifying execution
 -------------------
-step: steps n lines of sourcecode
-step steps 1 line.
-step 100 steps 100 lines of code.
+step:
+  steps n lines of sourcecode
 
-next: like step except this will not step into subroutines
+step
+  steps 1 line.
 
-stepi: steps a single machine code instruction.
-e.g. stepi 100
+step 100
+  steps 100 lines of code.
 
-nexti: steps a single machine code instruction but will not step into
-subroutines.
+next:
+	like step except this will not step into subroutines
 
-finish: will run until exit of the current routine
+stepi:
+	steps a single machine code instruction.
 
-run: (re)starts a program
+e.g.::
 
-cont: continues a program
+	stepi 100
 
-quit: exits gdb.
+nexti:
+	steps a single machine code instruction but will not step into
+	subroutines.
+
+finish:
+	will run until exit of the current routine
+
+run:
+	(re)starts a program
+
+cont:
+	continues a program
+
+quit:
+	exits gdb.
 
 
 breakpoints
 ------------
 
 break
-sets a breakpoint
-e.g.
+  sets a breakpoint
 
-break main
+e.g.::
 
-break *$pc
-
-break *0x400618
+	break main
+	break *$pc
+	break *0x400618
 
 Here's a really useful one for large programs
+
 rbr
-Set a breakpoint for all functions matching REGEXP
-e.g.
-rbr 390
+	Set a breakpoint for all functions matching REGEXP
+
+e.g.::
+
+	rbr 390
+
 will set a breakpoint with all functions with 390 in their name.
 
 info breakpoints
-lists all breakpoints
+	lists all breakpoints
+
+delete:
+	delete breakpoint by number or delete them all
 
-delete: delete breakpoint by number or delete them all
 e.g.
-delete 1 will delete the first breakpoint
-delete will delete them all
 
-watch: This will set a watchpoint ( usually hardware assisted ),
+delete 1
+	will delete the first breakpoint
+
+
+delete
+	will delete them all
+
+watch:
+	This will set a watchpoint ( usually hardware assisted ),
+
 This will watch a variable till it changes
+
 e.g.
-watch cnt, will watch the variable cnt till it changes.
+
+watch cnt
+	will watch the variable cnt till it changes.
+
 As an aside unfortunately gdb's, architecture independent watchpoint code
 is inconsistent & not very good, watchpoints usually work but not always.
 
-info watchpoints: Display currently active watchpoints
+info watchpoints:
+	Display currently active watchpoints
 
 condition: ( another useful one )
-Specify breakpoint number N to break only if COND is true.
-Usage is `condition N COND', where N is an integer and COND is an
+	Specify breakpoint number N to break only if COND is true.
+
+Usage is `condition N COND`, where N is an integer and COND is an
 expression to be evaluated whenever breakpoint N is reached.
 
 
@@ -1723,41 +2041,51 @@ expression to be evaluated whenever breakpoint N is reached.
 User defined functions/macros
 -----------------------------
 define: ( Note this is very very useful,simple & powerful )
+
 usage define <name> <list of commands> end
 
-examples which you should consider putting into .gdbinit in your home directory
-define d
-stepi
-disassemble $pc $pc+10
-end
+examples which you should consider putting into .gdbinit in your home
+directory::
 
-define e
-nexti
-disassemble $pc $pc+10
-end
+	define d
+	stepi
+	disassemble $pc $pc+10
+	end
+	define e
+	nexti
+	disassemble $pc $pc+10
+	end
 
 
 Other hard to classify stuff
 ----------------------------
 signal n:
-sends the victim program a signal.
-e.g. signal 3 will send a SIGQUIT.
+   sends the victim program a signal.
+
+e.g. `signal 3` will send a SIGQUIT.
 
 info signals:
-what gdb does when the victim receives certain signals.
+	what gdb does when the victim receives certain signals.
 
 list:
-e.g.
-list lists current function source
-list 1,10 list first 10 lines of current file.
+
+e.g.:
+
+list
+	lists current function source
+list 1,10
+	list first 10 lines of current file.
+
 list test.c:1,10
 
 
 directory:
-Adds directories to be searched for source if gdb cannot find the source.
-(note it is a bit sensitive about slashes)
-e.g. To add the root of the filesystem to the searchpath do
-directory //
+  Adds directories to be searched for source if gdb cannot find the source.
+  (note it is a bit sensitive about slashes)
+
+e.g. To add the root of the filesystem to the searchpath do::
+
+	directory //
 
 
 call <function>
@@ -1765,153 +2093,205 @@ This calls a function in the victim program, this is pretty powerful
 e.g.
 (gdb) call printf("hello world")
 outputs:
-$1 = 11 
+$1 = 11
 
 You might now be thinking that the line above didn't work, something extra had
 to be done.
 (gdb) call fflush(stdout)
 hello world$2 = 0
-As an aside the debugger also calls malloc & free under the hood 
+As an aside the debugger also calls malloc & free under the hood
 to make space for the "hello world" string.
 
 
 
 hints
 -----
-1) command completion works just like bash 
-( if you are a bad typist like me this really helps )
+1) command completion works just like bash
+   ( if you are a bad typist like me this really helps )
+
 e.g. hit br <TAB> & cursor up & down :-).
 
 2) if you have a debugging problem that takes a few steps to recreate
 put the steps into a file called .gdbinit in your current working directory
-if you have defined a few extra useful user defined commands put these in 
+if you have defined a few extra useful user defined commands put these in
 your home directory & they will be read each time gdb is launched.
 
-A typical .gdbinit file might be.
-break main
-run
-break runtime_exception
-cont 
+A typical .gdbinit file might be.::
+
+	break main
+	run
+	break runtime_exception
+	cont
 
 
 stack chaining in gdb by hand
 -----------------------------
-This is done using a the same trick described for VM 
-p/x (*($sp+56))&0x7fffffff get the first backchain.
+This is done using a the same trick described for VM::
+
+	p/x (*($sp+56))&0x7fffffff
+
+get the first backchain.
 
 For z/Architecture
 Replace 56 with 112 & ignore the &0x7fffffff
 in the macros below & do nasty casts to longs like the following
 as gdb unfortunately deals with printed arguments as ints which
 messes up everything.
-i.e. here is a 3rd backchain dereference
-p/x *(long *)(***(long ***)$sp+112)
 
+i.e. here is a 3rd backchain dereference::
+
+	p/x *(long *)(***(long ***)$sp+112)
+
+
+this outputs::
+
+	$5 = 0x528f18
 
-this outputs 
-$5 = 0x528f18 
 on my machine.
-Now you can use 
-info symbol (*($sp+56))&0x7fffffff 
-you might see something like.
-rl_getc + 36 in section .text  telling you what is located at address 0x528f18
-Now do.
-p/x (*(*$sp+56))&0x7fffffff 
-This outputs
-$6 = 0x528ed0
-Now do.
-info symbol (*(*$sp+56))&0x7fffffff
-rl_read_key + 180 in section .text
-now do
-p/x (*(**$sp+56))&0x7fffffff
+
+Now you can use::
+
+	info symbol (*($sp+56))&0x7fffffff
+
+you might see something like::
+
+	rl_getc + 36 in section .text
+
+telling you what is located at address 0x528f18
+Now do::
+
+	p/x (*(*$sp+56))&0x7fffffff
+
+This outputs::
+
+	$6 = 0x528ed0
+
+Now do::
+
+	info symbol (*(*$sp+56))&0x7fffffff
+	rl_read_key + 180 in section .text
+
+now do::
+
+	p/x (*(**$sp+56))&0x7fffffff
+
 & so on.
 
 Disassembling instructions without debug info
 ---------------------------------------------
 gdb typically complains if there is a lack of debugging
-symbols in the disassemble command with 
+symbols in the disassemble command with
 "No function contains specified address." To get around
-this do 
-x/<number lines to disassemble>xi <address>
-e.g.
-x/20xi 0x400730
+this do::
 
+	x/<number lines to disassemble>xi <address>
 
+e.g.::
 
-Note: Remember gdb has history just like bash you don't need to retype the
-whole line just use the up & down arrows.
+	x/20xi 0x400730
+
+
+
+Note:
+  Remember gdb has history just like bash you don't need to retype the
+  whole line just use the up & down arrows.
 
 
 
 For more info
 -------------
-From your linuxbox do 
-man gdb or info gdb.
+From your linuxbox do::
+
+	man gdb
+
+or::
+
+	info gdb.
 
 core dumps
 ----------
-What a core dump ?,
+
+What a core dump ?
+^^^^^^^^^^^^^^^^^^
+
 A core dump is a file generated by the kernel (if allowed) which contains the
 registers and all active pages of the program which has crashed.
+
 From this file gdb will allow you to look at the registers, stack trace and
 memory of the program as if it just crashed on your system. It is usually
 called core and created in the current working directory.
+
 This is very useful in that a customer can mail a core dump to a technical
 support department and the technical support department can reconstruct what
 happened. Provided they have an identical copy of this program with debugging
 symbols compiled in and the source base of this build is available.
+
 In short it is far more useful than something like a crash log could ever hope
 to be.
 
-Why have I never seen one ?.
-Probably because you haven't used the command 
-ulimit -c unlimited in bash
-to allow core dumps, now do 
-ulimit -a 
+Why have I never seen one ?
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Probably because you haven't used the command::
+
+	ulimit -c unlimited in bash
+
+to allow core dumps, now do::
+
+	ulimit -a
+
 to verify that the limit was accepted.
 
 A sample core dump
-To create this I'm going to do
-ulimit -c unlimited
-gdb 
-to launch gdb (my victim app. ) now be bad & do the following from another 
-telnet/xterm session to the same machine
-ps -aux | grep gdb
-kill -SIGSEGV <gdb's pid>
-or alternatively use killall -SIGSEGV gdb if you have the killall command.
-Now look at the core dump.
-./gdb core
-Displays the following
-GNU gdb 4.18
-Copyright 1998 Free Software Foundation, Inc.
-GDB is free software, covered by the GNU General Public License, and you are
-welcome to change it and/or distribute copies of it under certain conditions.
-Type "show copying" to see the conditions.
-There is absolutely no warranty for GDB.  Type "show warranty" for details.
-This GDB was configured as "s390-ibm-linux"...
-Core was generated by `./gdb'.
-Program terminated with signal 11, Segmentation fault.
-Reading symbols from /usr/lib/libncurses.so.4...done.
-Reading symbols from /lib/libm.so.6...done.
-Reading symbols from /lib/libc.so.6...done.
-Reading symbols from /lib/ld-linux.so.2...done.
-#0  0x40126d1a in read () from /lib/libc.so.6
-Setting up the environment for debugging gdb.
-Breakpoint 1 at 0x4dc6f8: file utils.c, line 471.
-Breakpoint 2 at 0x4d87a4: file top.c, line 2609.
-(top-gdb) info stack
-#0  0x40126d1a in read () from /lib/libc.so.6
-#1  0x528f26 in rl_getc (stream=0x7ffffde8) at input.c:402
-#2  0x528ed0 in rl_read_key () at input.c:381
-#3  0x5167e6 in readline_internal_char () at readline.c:454
-#4  0x5168ee in readline_internal_charloop () at readline.c:507
-#5  0x51692c in readline_internal () at readline.c:521
-#6  0x5164fe in readline (prompt=0x7ffff810)
-    at readline.c:349
-#7  0x4d7a8a in command_line_input (prompt=0x564420 "(gdb) ", repeat=1,
-    annotation_suffix=0x4d6b44 "prompt") at top.c:2091
-#8  0x4d6cf0 in command_loop () at top.c:1345
-#9  0x4e25bc in main (argc=1, argv=0x7ffffdf4) at main.c:635
+   To create this I'm going to do::
+
+	ulimit -c unlimited
+	gdb
+
+to launch gdb (my victim app. ) now be bad & do the following from another
+telnet/xterm session to the same machine::
+
+	ps -aux | grep gdb
+	kill -SIGSEGV <gdb's pid>
+
+or alternatively use `killall -SIGSEGV gdb` if you have the killall command.
+
+Now look at the core dump::
+
+	./gdb core
+
+Displays the following::
+
+  GNU gdb 4.18
+  Copyright 1998 Free Software Foundation, Inc.
+  GDB is free software, covered by the GNU General Public License, and you are
+  welcome to change it and/or distribute copies of it under certain conditions.
+  Type "show copying" to see the conditions.
+  There is absolutely no warranty for GDB.  Type "show warranty" for details.
+  This GDB was configured as "s390-ibm-linux"...
+  Core was generated by `./gdb'.
+  Program terminated with signal 11, Segmentation fault.
+  Reading symbols from /usr/lib/libncurses.so.4...done.
+  Reading symbols from /lib/libm.so.6...done.
+  Reading symbols from /lib/libc.so.6...done.
+  Reading symbols from /lib/ld-linux.so.2...done.
+  #0  0x40126d1a in read () from /lib/libc.so.6
+  Setting up the environment for debugging gdb.
+  Breakpoint 1 at 0x4dc6f8: file utils.c, line 471.
+  Breakpoint 2 at 0x4d87a4: file top.c, line 2609.
+  (top-gdb) info stack
+  #0  0x40126d1a in read () from /lib/libc.so.6
+  #1  0x528f26 in rl_getc (stream=0x7ffffde8) at input.c:402
+  #2  0x528ed0 in rl_read_key () at input.c:381
+  #3  0x5167e6 in readline_internal_char () at readline.c:454
+  #4  0x5168ee in readline_internal_charloop () at readline.c:507
+  #5  0x51692c in readline_internal () at readline.c:521
+  #6  0x5164fe in readline (prompt=0x7ffff810)
+      at readline.c:349
+  #7  0x4d7a8a in command_line_input (prompt=0x564420 "(gdb) ", repeat=1,
+      annotation_suffix=0x4d6b44 "prompt") at top.c:2091
+  #8  0x4d6cf0 in command_loop () at top.c:1345
+  #9  0x4e25bc in main (argc=1, argv=0x7ffffdf4) at main.c:635
 
 
 LDD
@@ -1919,27 +2299,32 @@ LDD
 This is a program which lists the shared libraries which a library needs,
 Note you also get the relocations of the shared library text segments which
 help when using objdump --source.
-e.g.
- ldd ./gdb
-outputs
-libncurses.so.4 => /usr/lib/libncurses.so.4 (0x40018000)
-libm.so.6 => /lib/libm.so.6 (0x4005e000)
-libc.so.6 => /lib/libc.so.6 (0x40084000)
-/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000)
+
+e.g.::
+
+	ldd ./gdb
+
+outputs::
+
+  libncurses.so.4 => /usr/lib/libncurses.so.4 (0x40018000)
+  libm.so.6 => /lib/libm.so.6 (0x4005e000)
+  libc.so.6 => /lib/libc.so.6 (0x40084000)
+  /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000)
 
 
 Debugging shared libraries
 ==========================
 Most programs use shared libraries, however it can be very painful
-when you single step instruction into a function like printf for the 
+when you single step instruction into a function like printf for the
 first time & you end up in functions like _dl_runtime_resolve this is
-the ld.so doing lazy binding, lazy binding is a concept in ELF where 
-shared library functions are not loaded into memory unless they are 
+the ld.so doing lazy binding, lazy binding is a concept in ELF where
+shared library functions are not loaded into memory unless they are
 actually used, great for saving memory but a pain to debug.
-To get around this either relink the program -static or exit gdb type 
-export LD_BIND_NOW=true this will stop lazy binding & restart the gdb'ing 
+
+To get around this either relink the program -static or exit gdb type
+export LD_BIND_NOW=true this will stop lazy binding & restart the gdb'ing
 the program in question.
- 
+
 
 
 Debugging modules
@@ -1955,106 +2340,127 @@ It is a filesystem created by the kernel with files which are created on demand
 by the kernel if read, or can be used to modify kernel parameters,
 it is a powerful concept.
 
-e.g.
-
-cat /proc/sys/net/ipv4/ip_forward 
-On my machine outputs 
-0 
-telling me ip_forwarding is not on to switch it on I can do
-echo 1 >  /proc/sys/net/ipv4/ip_forward
-cat it again
-cat /proc/sys/net/ipv4/ip_forward 
-On my machine now outputs
-1
+e.g.::
+
+	cat /proc/sys/net/ipv4/ip_forward
+
+On my machine outputs::
+
+	0
+
+telling me ip_forwarding is not on to switch it on I can do::
+
+	echo 1 >  /proc/sys/net/ipv4/ip_forward
+
+cat it again::
+
+	cat /proc/sys/net/ipv4/ip_forward
+
+On my machine now outputs::
+
+	1
+
 IP forwarding is on.
+
 There is a lot of useful info in here best found by going in and having a look
 around, so I'll take you through some entries I consider important.
 
 All the processes running on the machine have their own entry defined by
 /proc/<pid>
-So lets have a look at the init process
-cd /proc/1
 
-cat cmdline
-emits
-init [2]
+So lets have a look at the init process::
+
+	cd /proc/1
+	cat cmdline
+
+emits::
+
+	init [2]
+
+::
+
+	cd /proc/1/fd
 
-cd /proc/1/fd
 This contains numerical entries of all the open files,
-some of these you can cat e.g. stdout (2)
+some of these you can cat e.g. stdout (2)::
 
-cat /proc/29/maps
-on my machine emits
+	cat /proc/29/maps
 
-00400000-00478000 r-xp 00000000 5f:00 4103       /bin/bash
-00478000-0047e000 rw-p 00077000 5f:00 4103       /bin/bash
-0047e000-00492000 rwxp 00000000 00:00 0
-40000000-40015000 r-xp 00000000 5f:00 14382      /lib/ld-2.1.2.so
-40015000-40016000 rw-p 00014000 5f:00 14382      /lib/ld-2.1.2.so
-40016000-40017000 rwxp 00000000 00:00 0
-40017000-40018000 rw-p 00000000 00:00 0
-40018000-4001b000 r-xp 00000000 5f:00 14435      /lib/libtermcap.so.2.0.8
-4001b000-4001c000 rw-p 00002000 5f:00 14435      /lib/libtermcap.so.2.0.8
-4001c000-4010d000 r-xp 00000000 5f:00 14387      /lib/libc-2.1.2.so
-4010d000-40111000 rw-p 000f0000 5f:00 14387      /lib/libc-2.1.2.so
-40111000-40114000 rw-p 00000000 00:00 0
-40114000-4011e000 r-xp 00000000 5f:00 14408      /lib/libnss_files-2.1.2.so
-4011e000-4011f000 rw-p 00009000 5f:00 14408      /lib/libnss_files-2.1.2.so
-7fffd000-80000000 rwxp ffffe000 00:00 0
+on my machine emits::
+
+  00400000-00478000 r-xp 00000000 5f:00 4103       /bin/bash
+  00478000-0047e000 rw-p 00077000 5f:00 4103       /bin/bash
+  0047e000-00492000 rwxp 00000000 00:00 0
+  40000000-40015000 r-xp 00000000 5f:00 14382      /lib/ld-2.1.2.so
+  40015000-40016000 rw-p 00014000 5f:00 14382      /lib/ld-2.1.2.so
+  40016000-40017000 rwxp 00000000 00:00 0
+  40017000-40018000 rw-p 00000000 00:00 0
+  40018000-4001b000 r-xp 00000000 5f:00 14435      /lib/libtermcap.so.2.0.8
+  4001b000-4001c000 rw-p 00002000 5f:00 14435      /lib/libtermcap.so.2.0.8
+  4001c000-4010d000 r-xp 00000000 5f:00 14387      /lib/libc-2.1.2.so
+  4010d000-40111000 rw-p 000f0000 5f:00 14387      /lib/libc-2.1.2.so
+  40111000-40114000 rw-p 00000000 00:00 0
+  40114000-4011e000 r-xp 00000000 5f:00 14408      /lib/libnss_files-2.1.2.so
+  4011e000-4011f000 rw-p 00009000 5f:00 14408      /lib/libnss_files-2.1.2.so
+  7fffd000-80000000 rwxp ffffe000 00:00 0
 
 
 Showing us the shared libraries init uses where they are in memory
 & memory access permissions for each virtual memory area.
 
 /proc/1/cwd is a softlink to the current working directory.
-/proc/1/root is the root of the filesystem for this process. 
+
+/proc/1/root is the root of the filesystem for this process.
 
 /proc/1/mem is the current running processes memory which you
 can read & write to like a file.
+
 strace uses this sometimes as it is a bit faster than the
 rather inefficient ptrace interface for peeking at DATA.
 
+::
 
-cat status 
+  cat status
 
-Name:   init
-State:  S (sleeping)
-Pid:    1
-PPid:   0
-Uid:    0       0       0       0
-Gid:    0       0       0       0
-Groups:
-VmSize:      408 kB
-VmLck:         0 kB
-VmRSS:       208 kB
-VmData:       24 kB
-VmStk:         8 kB
-VmExe:       368 kB
-VmLib:         0 kB
-SigPnd: 0000000000000000
-SigBlk: 0000000000000000
-SigIgn: 7fffffffd7f0d8fc
-SigCgt: 00000000280b2603
-CapInh: 00000000fffffeff
-CapPrm: 00000000ffffffff
-CapEff: 00000000fffffeff
+  Name:   init
+  State:  S (sleeping)
+  Pid:    1
+  PPid:   0
+  Uid:    0       0       0       0
+  Gid:    0       0       0       0
+  Groups:
+  VmSize:      408 kB
+  VmLck:         0 kB
+  VmRSS:       208 kB
+  VmData:       24 kB
+  VmStk:         8 kB
+  VmExe:       368 kB
+  VmLib:         0 kB
+  SigPnd: 0000000000000000
+  SigBlk: 0000000000000000
+  SigIgn: 7fffffffd7f0d8fc
+  SigCgt: 00000000280b2603
+  CapInh: 00000000fffffeff
+  CapPrm: 00000000ffffffff
+  CapEff: 00000000fffffeff
+
+  User PSW:    070de000 80414146
+  task: 004b6000 tss: 004b62d8 ksp: 004b7ca8 pt_regs: 004b7f68
+  User GPRS:
+  00000400  00000000  0000000b  7ffffa90
+  00000000  00000000  00000000  0045d9f4
+  0045cafc  7ffffa90  7fffff18  0045cb08
+  00010400  804039e8  80403af8  7ffff8b0
+  User ACRS:
+  00000000  00000000  00000000  00000000
+  00000001  00000000  00000000  00000000
+  00000000  00000000  00000000  00000000
+  00000000  00000000  00000000  00000000
+  Kernel BackChain  CallChain    BackChain  CallChain
+	 004b7ca8   8002bd0c     004b7d18   8002b92c
+	 004b7db8   8005cd50     004b7e38   8005d12a
+	 004b7f08   80019114
 
-User PSW:    070de000 80414146
-task: 004b6000 tss: 004b62d8 ksp: 004b7ca8 pt_regs: 004b7f68
-User GPRS:
-00000400  00000000  0000000b  7ffffa90
-00000000  00000000  00000000  0045d9f4
-0045cafc  7ffffa90  7fffff18  0045cb08
-00010400  804039e8  80403af8  7ffff8b0
-User ACRS:
-00000000  00000000  00000000  00000000
-00000001  00000000  00000000  00000000
-00000000  00000000  00000000  00000000
-00000000  00000000  00000000  00000000
-Kernel BackChain  CallChain    BackChain  CallChain
-       004b7ca8   8002bd0c     004b7d18   8002b92c
-       004b7db8   8005cd50     004b7e38   8005d12a
-       004b7f08   80019114                     
 Showing among other things memory usage & status of some signals &
 the processes'es registers from the kernel task_structure
 as well as a backchain which may be useful if a process crashes
@@ -2067,11 +2473,16 @@ debug feature
 Some of our drivers now support a "debug feature" in
 /proc/s390dbf see s390dbf.txt in the linux/Documentation directory
 for more info.
-e.g. 
-to switch on the lcs "debug feature"
-echo 5 > /proc/s390dbf/lcs/level
-& then after the error occurred.
-cat /proc/s390dbf/lcs/sprintf >/logfile
+
+e.g.
+to switch on the lcs "debug feature"::
+
+	echo 5 > /proc/s390dbf/lcs/level
+
+& then after the error occurred::
+
+	cat /proc/s390dbf/lcs/sprintf >/logfile
+
 the logfile now contains some information which may help
 tech support resolve a problem in the field.
 
@@ -2083,35 +2494,50 @@ ifconfig is a quite useful command
 it gives the current state of network drivers.
 
 If you suspect your network device driver is dead
-one way to check is type 
-ifconfig <network device> 
+one way to check is type::
+
+	ifconfig <network device>
+
 e.g. tr0
-You should see something like
-tr0       Link encap:16/4 Mbps Token Ring (New)  HWaddr 00:04:AC:20:8E:48
-          inet addr:9.164.185.132  Bcast:9.164.191.255  Mask:255.255.224.0
-          UP BROADCAST RUNNING MULTICAST  MTU:2000  Metric:1
-          RX packets:246134 errors:0 dropped:0 overruns:0 frame:0
-          TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
-          collisions:0 txqueuelen:100
+
+You should see something like::
+
+	ifconfig tr0
+	tr0      Link encap:16/4 Mbps Token Ring (New)  HWaddr 00:04:AC:20:8E:48
+		inet addr:9.164.185.132  Bcast:9.164.191.255  Mask:255.255.224.0
+		UP BROADCAST RUNNING MULTICAST  MTU:2000  Metric:1
+		RX packets:246134 errors:0 dropped:0 overruns:0 frame:0
+		TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
+		collisions:0 txqueuelen:100
 
 if the device doesn't say up
-try
-/etc/rc.d/init.d/network start 
+try::
+
+	/etc/rc.d/init.d/network start
+
 ( this starts the network stack & hopefully calls ifconfig tr0 up ).
 ifconfig looks at the output of /proc/net/dev and presents it in a more
 presentable form.
+
 Now ping the device from a machine in the same subnet.
+
 if the RX packets count & TX packets counts don't increment you probably
 have problems.
-next 
-cat /proc/net/arp
+
+next::
+
+	cat /proc/net/arp
+
 Do you see any hardware addresses in the cache if not you may have problems.
-Next try
-ping -c 5 <broadcast_addr> i.e. the Bcast field above in the output of
+Next try::
+
+	ping -c 5 <broadcast_addr>
+
+i.e. the Bcast field above in the output of
 ifconfig. Do you see any replies from machines other than the local machine
 if not you may have problems. also if the TX packets count in ifconfig
-hasn't incremented either you have serious problems in your driver 
-(e.g. the txbusy field of the network device being stuck on ) 
+hasn't incremented either you have serious problems in your driver
+(e.g. the txbusy field of the network device being stuck on )
 or you may have multiple network devices connected.
 
 
@@ -2119,28 +2545,43 @@ chandev
 -------
 There is a new device layer for channel devices, some
 drivers e.g. lcs are registered with this layer.
+
 If the device uses the channel device layer you'll be
-able to find what interrupts it uses & the current state 
+able to find what interrupts it uses & the current state
 of the device.
+
 See the manpage chandev.8 &type cat /proc/chandev for more info.
 
 
 SysRq
 =====
 This is now supported by linux for s/390 & z/Architecture.
-To enable it do compile the kernel with 
-Kernel Hacking -> Magic SysRq Key Enabled
-echo "1" > /proc/sys/kernel/sysrq
-also type
-echo "8" >/proc/sys/kernel/printk
+
+To enable it do compile the kernel with::
+
+	Kernel Hacking -> Magic SysRq Key Enabled
+
+Then::
+
+	echo "1" > /proc/sys/kernel/sysrq
+
+also type::
+
+	echo "8" >/proc/sys/kernel/printk
+
 To make printk output go to console.
-On 390 all commands are prefixed with
-^-
-e.g.
-^-t will show tasks.
-^-? or some unknown command will display help.
+
+On 390 all commands are prefixed with::
+
+	^-
+
+e.g.::
+
+	^-t will show tasks.
+	^-? or some unknown command will display help.
+
 The sysrq key reading is very picky ( I have to type the keys in an
- xterm session & paste them  into the x3270 console )
+xterm session & paste them  into the x3270 console )
 & it may be wise to predefine the keys as described in the VM hints above
 
 This is particularly useful for syncing disks unmounting & rebooting
@@ -2150,19 +2591,19 @@ Read Documentation/admin-guide/sysrq.rst for more info
 
 References:
 ===========
-Enterprise Systems Architecture Reference Summary
-Enterprise Systems Architecture Principles of Operation
-Hartmut Penners s390 stack frame sheet.
-IBM Mainframe Channel Attachment a technology brief from a CISCO webpage
-Various bits of man & info pages of Linux.
-Linux & GDB source.
-Various info & man pages.
-CMS Help on tracing commands.
-Linux for s/390 Elf Application Binary Interface
-Linux for z/Series Elf Application Binary Interface ( Both Highly Recommended )
-z/Architecture Principles of Operation SA22-7832-00
-Enterprise Systems Architecture/390 Reference Summary SA22-7209-01 & the
-Enterprise Systems Architecture/390 Principles of Operation SA22-7201-05
+- Enterprise Systems Architecture Reference Summary
+- Enterprise Systems Architecture Principles of Operation
+- Hartmut Penners s390 stack frame sheet.
+- IBM Mainframe Channel Attachment a technology brief from a CISCO webpage
+- Various bits of man & info pages of Linux.
+- Linux & GDB source.
+- Various info & man pages.
+- CMS Help on tracing commands.
+- Linux for s/390 Elf Application Binary Interface
+- Linux for z/Series Elf Application Binary Interface ( Both Highly Recommended )
+- z/Architecture Principles of Operation SA22-7832-00
+- Enterprise Systems Architecture/390 Reference Summary SA22-7209-01 & the
+- Enterprise Systems Architecture/390 Principles of Operation SA22-7201-05
 
 Special Thanks
 ==============
diff --git a/Documentation/s390/driver-model.txt b/Documentation/s390/driver-model.rst
similarity index 73%
rename from Documentation/s390/driver-model.txt
rename to Documentation/s390/driver-model.rst
index ed265cf54cde..ad4bc2dbea43 100644
--- a/Documentation/s390/driver-model.txt
+++ b/Documentation/s390/driver-model.rst
@@ -1,5 +1,6 @@
+=============================
 S/390 driver model interfaces
------------------------------
+=============================
 
 1. CCW devices
 --------------
@@ -7,13 +8,13 @@ S/390 driver model interfaces
 All devices which can be addressed by means of ccws are called 'CCW devices' -
 even if they aren't actually driven by ccws.
 
-All ccw devices are accessed via a subchannel, this is reflected in the 
-structures under devices/:
+All ccw devices are accessed via a subchannel, this is reflected in the
+structures under devices/::
 
-devices/
+  devices/
      - system/
      - css0/
-           - 0.0.0000/0.0.0815/
+	   - 0.0.0000/0.0.0815/
 	   - 0.0.0001/0.0.4711/
 	   - 0.0.0002/
 	   - 0.1.0000/0.1.1234/
@@ -35,14 +36,18 @@ be found under bus/ccw/devices/.
 
 All ccw devices export some data via sysfs.
 
-cutype:	    The control unit type / model.
+cutype:
+	The control unit type / model.
 
-devtype:    The device type / model, if applicable.
+devtype:
+	The device type / model, if applicable.
 
-availability: Can be 'good' or 'boxed'; 'no path' or 'no device' for
+availability:
+	      Can be 'good' or 'boxed'; 'no path' or 'no device' for
 	      disconnected devices.
 
-online:     An interface to set the device online and offline.
+online:
+	    An interface to set the device online and offline.
 	    In the special case of the device being disconnected (see the
 	    notify function under 1.2), piping 0 to online will forcibly delete
 	    the device.
@@ -52,9 +57,11 @@ The device drivers can add entries to export per-device data and interfaces.
 There is also some data exported on a per-subchannel basis (see under
 bus/css/devices/):
 
-chpids:	    Via which chpids the device is connected.
+chpids:
+	Via which chpids the device is connected.
 
-pimpampom:  The path installed, path available and path operational masks.
+pimpampom:
+	The path installed, path available and path operational masks.
 
 There also might be additional data, for example for block devices.
 
@@ -74,77 +81,93 @@ b. After a. has been performed, if necessary, the device is finally brought up
 ------------------------------------
 
 The basic struct ccw_device and struct ccw_driver data structures can be found
-under include/asm/ccwdev.h.
+under include/asm/ccwdev.h::
 
-struct ccw_device {
-        spinlock_t *ccwlock;
-        struct ccw_device_private *private;
-	struct ccw_device_id id;	
+  struct ccw_device {
+	spinlock_t *ccwlock;
+	struct ccw_device_private *private;
+	struct ccw_device_id id;
 
-	struct ccw_driver *drv;		
-	struct device dev;		
+	struct ccw_driver *drv;
+	struct device dev;
 	int online;
 
 	void (*handler) (struct ccw_device *dev, unsigned long intparm,
-                         struct irb *irb);
-};
+			 struct irb *irb);
+  };
 
-struct ccw_driver {
-	struct module *owner;		
-	struct ccw_device_id *ids;	
-	int (*probe) (struct ccw_device *); 
+  struct ccw_driver {
+	struct module *owner;
+	struct ccw_device_id *ids;
+	int (*probe) (struct ccw_device *);
 	int (*remove) (struct ccw_device *);
 	int (*set_online) (struct ccw_device *);
 	int (*set_offline) (struct ccw_device *);
 	int (*notify) (struct ccw_device *, int);
 	struct device_driver driver;
 	char *name;
-};
+  };
 
 The 'private' field contains data needed for internal i/o operation only, and
 is not available to the device driver.
 
 Each driver should declare in a MODULE_DEVICE_TABLE into which CU types/models
 and/or device types/models it is interested. This information can later be found
-in the struct ccw_device_id fields:
+in the struct ccw_device_id fields::
 
-struct ccw_device_id {
-	__u16	match_flags;	
+  struct ccw_device_id {
+	__u16   match_flags;
 
-	__u16	cu_type;	
-	__u16	dev_type;	
-	__u8	cu_model;	
-	__u8	dev_model;	
+	__u16   cu_type;
+	__u16   dev_type;
+	__u8    cu_model;
+	__u8    dev_model;
 
 	unsigned long driver_info;
-};
+  };
 
 The functions in ccw_driver should be used in the following way:
-probe:   This function is called by the device layer for each device the driver
+
+probe:
+	 This function is called by the device layer for each device the driver
 	 is interested in. The driver should only allocate private structures
 	 to put in dev->driver_data and create attributes (if needed). Also,
 	 the interrupt handler (see below) should be set here.
 
-int (*probe) (struct ccw_device *cdev); 
+::
 
-Parameters:  cdev     - the device to be probed.
+  int (*probe) (struct ccw_device *cdev);
 
+Parameters:
+		cdev
+			- the device to be probed.
 
-remove:  This function is called by the device layer upon removal of the driver,
+
+remove:
+	 This function is called by the device layer upon removal of the driver,
 	 the device or the module. The driver should perform cleanups here.
 
-int (*remove) (struct ccw_device *cdev);
+::
 
-Parameters:   cdev    - the device to be removed.
+  int (*remove) (struct ccw_device *cdev);
 
+Parameters:
+		cdev
+			- the device to be removed.
 
-set_online: This function is called by the common I/O layer when the device is
+
+set_online:
+	    This function is called by the common I/O layer when the device is
 	    activated via the 'online' attribute. The driver should finally
 	    setup and activate the device here.
 
-int (*set_online) (struct ccw_device *);
+::
 
-Parameters:   cdev	- the device to be activated. The common layer has
+  int (*set_online) (struct ccw_device *);
+
+Parameters:
+		cdev
+			- the device to be activated. The common layer has
 			  verified that the device is not already online.
 
 
@@ -152,15 +175,22 @@ set_offline: This function is called by the common I/O layer when the device is
 	     de-activated via the 'online' attribute. The driver should shut
 	     down the device, but not de-allocate its private data.
 
-int (*set_offline) (struct ccw_device *);
+::
 
-Parameters:   cdev       - the device to be deactivated. The common layer has
+  int (*set_offline) (struct ccw_device *);
+
+Parameters:
+		cdev
+			- the device to be deactivated. The common layer has
 			   verified that the device is online.
 
 
-notify: This function is called by the common I/O layer for some state changes
+notify:
+	This function is called by the common I/O layer for some state changes
 	of the device.
+
 	Signalled to the driver are:
+
 	* In online state, device detached (CIO_GONE) or last path gone
 	  (CIO_NO_PATH). The driver must return !0 to keep the device; for
 	  return code 0, the device will be deleted as usual (also when no
@@ -173,32 +203,40 @@ notify: This function is called by the common I/O layer for some state changes
 	  return code of the notify function the device driver signals if it
 	  wants the device back: !0 for keeping, 0 to make the device being
 	  removed and re-registered.
-	
-int (*notify) (struct ccw_device *, int);
 
-Parameters:   cdev    - the device whose state changed.
-	      event   - the event that happened. This can be one of CIO_GONE,
-		        CIO_NO_PATH or CIO_OPER.
+::
+
+  int (*notify) (struct ccw_device *, int);
+
+Parameters:
+		cdev
+			- the device whose state changed.
+
+		event
+			- the event that happened. This can be one of CIO_GONE,
+			  CIO_NO_PATH or CIO_OPER.
 
 The handler field of the struct ccw_device is meant to be set to the interrupt
-handler for the device. In order to accommodate drivers which use several 
+handler for the device. In order to accommodate drivers which use several
 distinct handlers (e.g. multi subchannel devices), this is a member of ccw_device
 instead of ccw_driver.
 The handler is registered with the common layer during set_online() processing
 before the driver is called, and is deregistered during set_offline() after the
-driver has been called. Also, after registering / before deregistering, path 
+driver has been called. Also, after registering / before deregistering, path
 grouping resp. disbanding of the path group (if applicable) are performed.
 
-void (*handler) (struct ccw_device *dev, unsigned long intparm, struct irb *irb);
+::
 
-Parameters:	dev	- the device the handler is called for
+  void (*handler) (struct ccw_device *dev, unsigned long intparm, struct irb *irb);
+
+Parameters:     dev     - the device the handler is called for
 		intparm - the intparm which allows the device driver to identify
-                          the i/o the interrupt is associated with, or to recognize
-                          the interrupt as unsolicited.
-                irb     - interruption response block which contains the accumulated
-                          status.
+			  the i/o the interrupt is associated with, or to recognize
+			  the interrupt as unsolicited.
+		irb     - interruption response block which contains the accumulated
+			  status.
 
-The device driver is called from the common ccw_device layer and can retrieve 
+The device driver is called from the common ccw_device layer and can retrieve
 information about the interrupt from the irb parameter.
 
 
@@ -237,23 +275,27 @@ only the logical state and not the physical state, since we cannot track the
 latter consistently due to lacking machine support (we don't need to be aware
 of it anyway).
 
-status - Can be 'online' or 'offline'.
+status
+       - Can be 'online' or 'offline'.
 	 Piping 'on' or 'off' sets the chpid logically online/offline.
 	 Piping 'on' to an online chpid triggers path reprobing for all devices
 	 the chpid connects to. This can be used to force the kernel to re-use
 	 a channel path the user knows to be online, but the machine hasn't
 	 created a machine check for.
 
-type - The physical type of the channel path.
+type
+       - The physical type of the channel path.
 
-shared - Whether the channel path is shared.
+shared
+       - Whether the channel path is shared.
 
-cmg - The channel measurement group.
+cmg
+       - The channel measurement group.
 
 3. System devices
 -----------------
 
-3.1 xpram 
+3.1 xpram
 ---------
 
 xpram shows up under devices/system/ as 'xpram'.
@@ -279,9 +321,8 @@ Netiucv connections show up under devices/iucv/ as "netiucv<ifnum>". The interfa
 number is assigned sequentially to the connections defined via the 'connection'
 attribute.
 
-user			  - shows the connection partner.
-
-buffer			  - maximum buffer size.
-			    Pipe to it to change buffer size.
-
+user
+    - shows the connection partner.
 
+buffer
+    - maximum buffer size. Pipe to it to change buffer size.
diff --git a/Documentation/s390/index.rst b/Documentation/s390/index.rst
new file mode 100644
index 000000000000..1a914da2a07b
--- /dev/null
+++ b/Documentation/s390/index.rst
@@ -0,0 +1,30 @@
+:orphan:
+
+=================
+s390 Architecture
+=================
+
+.. toctree::
+    :maxdepth: 1
+
+    cds
+    3270
+    debugging390
+    driver-model
+    monreader
+    qeth
+    s390dbf
+    vfio-ap
+    vfio-ccw
+    zfcpdump
+    dasd
+    common_io
+
+    text_files
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/s390/monreader.txt b/Documentation/s390/monreader.rst
similarity index 81%
rename from Documentation/s390/monreader.txt
rename to Documentation/s390/monreader.rst
index d3729585fdb0..1e857575c113 100644
--- a/Documentation/s390/monreader.txt
+++ b/Documentation/s390/monreader.rst
@@ -1,24 +1,26 @@
+=================================================
+Linux API for read access to z/VM Monitor Records
+=================================================
 
 Date  : 2004-Nov-26
+
 Author: Gerald Schaefer (geraldsc@de.ibm.com)
 
 
-             Linux API for read access to z/VM Monitor Records
-             =================================================
 
 
 Description
 ===========
 This item delivers a new Linux API in the form of a misc char device that is
 usable from user space and allows read access to the z/VM Monitor Records
-collected by the *MONITOR System Service of z/VM.
+collected by the `*MONITOR` System Service of z/VM.
 
 
 User Requirements
 =================
 The z/VM guest on which you want to access this API needs to be configured in
-order to allow IUCV connections to the *MONITOR service, i.e. it needs the
-IUCV *MONITOR statement in its user entry. If the monitor DCSS to be used is
+order to allow IUCV connections to the `*MONITOR` service, i.e. it needs the
+IUCV `*MONITOR` statement in its user entry. If the monitor DCSS to be used is
 restricted (likely), you also need the NAMESAVE <DCSS NAME> statement.
 This item will use the IUCV device driver to access the z/VM services, so you
 need a kernel with IUCV support. You also need z/VM version 4.4 or 5.1.
@@ -50,7 +52,9 @@ Your guest virtual storage has to end below the starting address of the DCSS
 and you have to specify the "mem=" kernel parameter in your parmfile with a
 value greater than the ending address of the DCSS.
 
-Example: DEF STOR 140M
+Example::
+
+	DEF STOR 140M
 
 This defines 140MB storage size for your guest, the parameter "mem=160M" is
 added to the parmfile.
@@ -66,24 +70,27 @@ kernel, the kernel parameter "monreader.mondcss=<DCSS NAME>" can be specified
 in the parmfile.
 
 The default name for the DCSS is "MONDCSS" if none is specified. In case that
-there are other users already connected to the *MONITOR service (e.g.
+there are other users already connected to the `*MONITOR` service (e.g.
 Performance Toolkit), the monitor DCSS is already defined and you have to use
 the same DCSS. The CP command Q MONITOR (Class E privileged) shows the name
 of the monitor DCSS, if already defined, and the users connected to the
-*MONITOR service.
+`*MONITOR` service.
 Refer to the "z/VM Performance" book (SC24-6109-00) on how to create a monitor
 DCSS if your z/VM doesn't have one already, you need Class E privileges to
 define and save a DCSS.
 
 Example:
 --------
-modprobe monreader mondcss=MYDCSS
+
+::
+
+	modprobe monreader mondcss=MYDCSS
 
 This loads the module and sets the DCSS name to "MYDCSS".
 
 NOTE:
 -----
-This API provides no interface to control the *MONITOR service, e.g. specify
+This API provides no interface to control the `*MONITOR` service, e.g. specify
 which data should be collected. This can be done by the CP command MONITOR
 (Class E privileged), see "CP Command and Utility Reference".
 
@@ -98,6 +105,7 @@ If your distribution does not support udev, a device node will not be created
 automatically and you have to create it manually after loading the module.
 Therefore you need to know the major and minor numbers of the device. These
 numbers can be found in /sys/class/misc/monreader/dev.
+
 Typing cat /sys/class/misc/monreader/dev will give an output of the form
 <major>:<minor>. The device node can be created via the mknod command, enter
 mknod <name> c <major> <minor>, where <name> is the name of the device node
@@ -105,10 +113,13 @@ to be created.
 
 Example:
 --------
-# modprobe monreader
-# cat /sys/class/misc/monreader/dev
-10:63
-# mknod /dev/monreader c 10 63
+
+::
+
+	# modprobe monreader
+	# cat /sys/class/misc/monreader/dev
+	10:63
+	# mknod /dev/monreader c 10 63
 
 This loads the module with the default monitor DCSS (MONDCSS) and creates a
 device node.
@@ -133,20 +144,21 @@ last byte of data. The start address is needed to handle "end-of-frame" records
 correctly (domain 1, record 13), i.e. it can be used to determine the record
 start offset relative to a 4K page (frame) boundary.
 
-See "Appendix A: *MONITOR" in the "z/VM Performance" document for a description
+See "Appendix A: `*MONITOR`" in the "z/VM Performance" document for a description
 of the monitor control element layout. The layout of the monitor records can
 be found here (z/VM 5.1): http://www.vm.ibm.com/pubs/mon510/index.html
 
-The layout of the data stream provided by the monreader device is as follows:
-...
-<0 byte read>
-<first MCE>              \
-<first set of records>    |
-...                       |- data set
-<last MCE>                |
-<last set of records>    /
-<0 byte read>
-...
+The layout of the data stream provided by the monreader device is as follows::
+
+	...
+	<0 byte read>
+	<first MCE>              \
+	<first set of records>    |
+	...                       |- data set
+	<last MCE>                |
+	<last set of records>    /
+	<0 byte read>
+	...
 
 There may be more than one combination of MCE and corresponding record set
 within one data set and the end of each data set is indicated by a successful
@@ -165,15 +177,19 @@ As with most char devices, error conditions are indicated by returning a
 negative value for the number of bytes read. In this case, the errno variable
 indicates the error condition:
 
-EIO: reply failed, read data is invalid and the application
+EIO:
+     reply failed, read data is invalid and the application
      should discard the data read since the last successful read with 0 size.
-EFAULT: copy_to_user failed, read data is invalid and the application should
-        discard the data read since the last successful read with 0 size.
-EAGAIN: occurs on a non-blocking read if there is no data available at the
-        moment. There is no data missing or corrupted, just try again or rather
-        use polling for non-blocking reads.
-EOVERFLOW: message limit reached, the data read since the last successful
-           read with 0 size is valid but subsequent records may be missing.
+EFAULT:
+	copy_to_user failed, read data is invalid and the application should
+	discard the data read since the last successful read with 0 size.
+EAGAIN:
+	occurs on a non-blocking read if there is no data available at the
+	moment. There is no data missing or corrupted, just try again or rather
+	use polling for non-blocking reads.
+EOVERFLOW:
+	   message limit reached, the data read since the last successful
+	   read with 0 size is valid but subsequent records may be missing.
 
 In the last case (EOVERFLOW) there may be missing data, in the first two cases
 (EIO, EFAULT) there will be missing data. It's up to the application if it will
@@ -183,7 +199,7 @@ Open:
 -----
 Only one user is allowed to open the char device. If it is already in use, the
 open function will fail (return a negative value) and set errno to EBUSY.
-The open function may also fail if an IUCV connection to the *MONITOR service
+The open function may also fail if an IUCV connection to the `*MONITOR` service
 cannot be established. In this case errno will be set to EIO and an error
 message with an IPUSER SEVER code will be printed into syslog. The IPUSER SEVER
 codes are described in the "z/VM Performance" book, Appendix A.
@@ -194,4 +210,3 @@ As soon as the device is opened, incoming messages will be accepted and they
 will account for the message limit, i.e. opening the device without reading
 from it will provoke the "message limit reached" error (EOVERFLOW error code)
 eventually.
-
diff --git a/Documentation/s390/qeth.txt b/Documentation/s390/qeth.rst
similarity index 62%
rename from Documentation/s390/qeth.txt
rename to Documentation/s390/qeth.rst
index aa06fcf5f8c2..f02fdaa68de0 100644
--- a/Documentation/s390/qeth.txt
+++ b/Documentation/s390/qeth.rst
@@ -1,8 +1,12 @@
+=============================
 IBM s390 QDIO Ethernet Driver
+=============================
 
 OSA and HiperSockets Bridge Port Support
+========================================
 
 Uevents
+-------
 
 To generate the events the device must be assigned a role of either
 a primary or a secondary Bridge Port. For more information, see
@@ -13,12 +17,15 @@ of some configured Bridge Port device on the channel changes, a udev
 event with ACTION=CHANGE is emitted on behalf of the corresponding
 ccwgroup device. The event has the following attributes:
 
-BRIDGEPORT=statechange -  indicates that the Bridge Port device changed
+BRIDGEPORT=statechange
+  indicates that the Bridge Port device changed
   its state.
 
-ROLE={primary|secondary|none} - the role assigned to the port.
+ROLE={primary|secondary|none}
+  the role assigned to the port.
 
-STATE={active|standby|inactive} - the newly assumed state of the port.
+STATE={active|standby|inactive}
+  the newly assumed state of the port.
 
 When run on HiperSockets Bridge Capable Port hardware with host address
 notifications enabled, a udev event with ACTION=CHANGE is emitted.
@@ -26,25 +33,32 @@ It is emitted on behalf of the corresponding ccwgroup device when a host
 or a VLAN is registered or unregistered on the network served by the device.
 The event has the following attributes:
 
-BRIDGEDHOST={reset|register|deregister|abort} - host address
+BRIDGEDHOST={reset|register|deregister|abort}
+  host address
   notifications are started afresh, a new host or VLAN is registered or
   deregistered on the Bridge Port HiperSockets channel, or address
   notifications are aborted.
 
-VLAN=numeric-vlan-id - VLAN ID on which the event occurred. Not included
+VLAN=numeric-vlan-id
+  VLAN ID on which the event occurred. Not included
   if no VLAN is involved in the event.
 
-MAC=xx:xx:xx:xx:xx:xx - MAC address of the host that is being registered
+MAC=xx:xx:xx:xx:xx:xx
+  MAC address of the host that is being registered
   or deregistered from the HiperSockets channel. Not reported if the
   event reports the creation or destruction of a VLAN.
 
-NTOK_BUSID=x.y.zzzz - device bus ID (CSSID, SSID and device number).
+NTOK_BUSID=x.y.zzzz
+  device bus ID (CSSID, SSID and device number).
 
-NTOK_IID=xx - device IID.
+NTOK_IID=xx
+  device IID.
 
-NTOK_CHPID=xx - device CHPID.
+NTOK_CHPID=xx
+  device CHPID.
 
-NTOK_CHID=xxxx - device channel ID.
+NTOK_CHID=xxxx
+  device channel ID.
 
-Note that the NTOK_* attributes refer to devices other than  the one
+Note that the `NTOK_*` attributes refer to devices other than  the one
 connected to the system on which the OS is running.
diff --git a/Documentation/s390/s390dbf.rst b/Documentation/s390/s390dbf.rst
new file mode 100644
index 000000000000..ec2a1faa414b
--- /dev/null
+++ b/Documentation/s390/s390dbf.rst
@@ -0,0 +1,803 @@
+==================
+S390 Debug Feature
+==================
+
+files:
+      - arch/s390/kernel/debug.c
+      - arch/s390/include/asm/debug.h
+
+Description:
+------------
+The goal of this feature is to provide a kernel debug logging API
+where log records can be stored efficiently in memory, where each component
+(e.g. device drivers) can have one separate debug log.
+One purpose of this is to inspect the debug logs after a production system crash
+in order to analyze the reason for the crash.
+
+If the system still runs but only a subcomponent which uses dbf fails,
+it is possible to look at the debug logs on a live system via the Linux
+debugfs filesystem.
+
+The debug feature may also very useful for kernel and driver development.
+
+Design:
+-------
+Kernel components (e.g. device drivers) can register themselves at the debug
+feature with the function call debug_register(). This function initializes a
+debug log for the caller. For each debug log exists a number of debug areas
+where exactly one is active at one time.  Each debug area consists of contiguous
+pages in memory. In the debug areas there are stored debug entries (log records)
+which are written by event- and exception-calls.
+
+An event-call writes the specified debug entry to the active debug
+area and updates the log pointer for the active area. If the end
+of the active debug area is reached, a wrap around is done (ring buffer)
+and the next debug entry will be written at the beginning of the active
+debug area.
+
+An exception-call writes the specified debug entry to the log and
+switches to the next debug area. This is done in order to be sure
+that the records which describe the origin of the exception are not
+overwritten when a wrap around for the current area occurs.
+
+The debug areas themselves are also ordered in form of a ring buffer.
+When an exception is thrown in the last debug area, the following debug
+entries are then written again in the very first area.
+
+There are three versions for the event- and exception-calls: One for
+logging raw data, one for text and one for numbers.
+
+Each debug entry contains the following data:
+
+- Timestamp
+- Cpu-Number of calling task
+- Level of debug entry (0...6)
+- Return Address to caller
+- Flag, if entry is an exception or not
+
+The debug logs can be inspected in a live system through entries in
+the debugfs-filesystem. Under the toplevel directory "s390dbf" there is
+a directory for each registered component, which is named like the
+corresponding component. The debugfs normally should be mounted to
+/sys/kernel/debug therefore the debug feature can be accessed under
+/sys/kernel/debug/s390dbf.
+
+The content of the directories are files which represent different views
+to the debug log. Each component can decide which views should be
+used through registering them with the function debug_register_view().
+Predefined views for hex/ascii, sprintf and raw binary data are provided.
+It is also possible to define other views. The content of
+a view can be inspected simply by reading the corresponding debugfs file.
+
+All debug logs have an actual debug level (range from 0 to 6).
+The default level is 3. Event and Exception functions have a 'level'
+parameter. Only debug entries with a level that is lower or equal
+than the actual level are written to the log. This means, when
+writing events, high priority log entries should have a low level
+value whereas low priority entries should have a high one.
+The actual debug level can be changed with the help of the debugfs-filesystem
+through writing a number string "x" to the 'level' debugfs file which is
+provided for every debug log. Debugging can be switched off completely
+by using "-" on the 'level' debugfs file.
+
+Example::
+
+	> echo "-" > /sys/kernel/debug/s390dbf/dasd/level
+
+It is also possible to deactivate the debug feature globally for every
+debug log. You can change the behavior using  2 sysctl parameters in
+/proc/sys/s390dbf:
+
+There are currently 2 possible triggers, which stop the debug feature
+globally. The first possibility is to use the "debug_active" sysctl. If
+set to 1 the debug feature is running. If "debug_active" is set to 0 the
+debug feature is turned off.
+
+The second trigger which stops the debug feature is a kernel oops.
+That prevents the debug feature from overwriting debug information that
+happened before the oops. After an oops you can reactivate the debug feature
+by piping 1 to /proc/sys/s390dbf/debug_active. Nevertheless, its not
+suggested to use an oopsed kernel in a production environment.
+
+If you want to disallow the deactivation of the debug feature, you can use
+the "debug_stoppable" sysctl. If you set "debug_stoppable" to 0 the debug
+feature cannot be stopped. If the debug feature is already stopped, it
+will stay deactivated.
+
+----------------------------------------------------------------------------
+
+Kernel Interfaces:
+------------------
+
+::
+
+  debug_info_t *debug_register(char *name, int pages, int nr_areas,
+			       int buf_size);
+
+Parameter:
+	      name:
+			   Name of debug log (e.g. used for debugfs entry)
+	      pages:
+			   Number of pages, which will be allocated per area
+	      nr_areas:
+			   Number of debug areas
+	      buf_size:
+			   Size of data area in each debug entry
+
+Return Value:
+	Handle for generated debug area
+
+	  NULL if register failed
+
+Description:  Allocates memory for a debug log
+	      Must not be called within an interrupt handler
+
+----------------------------------------------------------------------------
+
+::
+
+  debug_info_t *debug_register_mode(char *name, int pages, int nr_areas,
+				    int buf_size, mode_t mode, uid_t uid,
+				    gid_t gid);
+
+Parameter:
+	      name:
+			   Name of debug log (e.g. used for debugfs entry)
+	      pages:
+			   Number of pages, which will be allocated per area
+	      nr_areas:
+			   Number of debug areas
+	      buf_size:
+			   Size of data area in each debug entry
+	      mode:
+			   File mode for debugfs files. E.g. S_IRWXUGO
+	      uid:
+			   User ID for debugfs files. Currently only 0 is
+			   supported.
+	      gid:
+			   Group ID for debugfs files. Currently only 0 is
+			   supported.
+
+Return Value:
+	      Handle for generated debug area
+
+		NULL if register failed
+
+Description:
+	      Allocates memory for a debug log
+	      Must not be called within an interrupt handler
+
+---------------------------------------------------------------------------
+
+::
+
+  void debug_unregister (debug_info_t * id);
+
+Parameter:
+	       id:
+		    handle for debug log
+
+Return Value:
+	       none
+
+Description:
+	       frees memory for a debug log and removes all registered debug
+	       views.
+
+	       Must not be called within an interrupt handler
+
+---------------------------------------------------------------------------
+
+::
+
+  void debug_set_level (debug_info_t * id, int new_level);
+
+Parameter:     id:        handle for debug log
+	       new_level: new debug level
+
+Return Value:
+	       none
+
+Description:
+	       Sets new actual debug level if new_level is valid.
+
+---------------------------------------------------------------------------
+
+::
+
+  bool debug_level_enabled (debug_info_t * id, int level);
+
+Parameter:
+	      id:
+			  handle for debug log
+	      level:
+			  debug level
+
+Return Value:
+	      True if level is less or equal to the current debug level.
+
+Description:
+	      Returns true if debug events for the specified level would be
+	      logged. Otherwise returns false.
+
+---------------------------------------------------------------------------
+
+::
+
+  void debug_stop_all(void);
+
+Parameter:
+	       none
+
+Return Value:
+	       none
+
+Description:
+	       stops the debug feature if stopping is allowed. Currently
+	       used in case of a kernel oops.
+
+---------------------------------------------------------------------------
+
+::
+
+  debug_entry_t* debug_event (debug_info_t* id, int level, void* data,
+			      int length);
+
+Parameter:
+	       id:
+		       handle for debug log
+	       level:
+		       debug level
+	       data:
+		       pointer to data for debug entry
+	       length:
+		       length of data in bytes
+
+Return Value:
+	       Address of written debug entry
+
+Description:
+	       writes debug entry to active debug area (if level <= actual
+	       debug level)
+
+---------------------------------------------------------------------------
+
+::
+
+  debug_entry_t* debug_int_event (debug_info_t * id, int level,
+				  unsigned int data);
+  debug_entry_t* debug_long_event(debug_info_t * id, int level,
+				  unsigned long data);
+
+Parameter:
+	       id:
+		       handle for debug log
+	       level:
+		       debug level
+	       data:
+		       integer value for debug entry
+
+Return Value:
+	       Address of written debug entry
+
+Description:
+	       writes debug entry to active debug area (if level <= actual
+	       debug level)
+
+---------------------------------------------------------------------------
+
+::
+
+  debug_entry_t* debug_text_event (debug_info_t * id, int level,
+				   const char* data);
+
+Parameter:
+	       id:
+		       handle for debug log
+	       level:
+		       debug level
+	       data:
+		       string for debug entry
+
+Return Value:
+	       Address of written debug entry
+
+Description:
+	       writes debug entry in ascii format to active debug area
+	       (if level <= actual debug level)
+
+---------------------------------------------------------------------------
+
+::
+
+  debug_entry_t* debug_sprintf_event (debug_info_t * id, int level,
+				      char* string,...);
+
+Parameter:
+	       id:
+		      handle for debug log
+	       level:
+		      debug level
+	       string:
+		      format string for debug entry
+	       ...:
+		      varargs used as in sprintf()
+
+Return Value:  Address of written debug entry
+
+Description:
+	       writes debug entry with format string and varargs (longs) to
+	       active debug area (if level $<=$ actual debug level).
+	       floats and long long datatypes cannot be used as varargs.
+
+---------------------------------------------------------------------------
+
+::
+
+  debug_entry_t* debug_exception (debug_info_t* id, int level, void* data,
+				  int length);
+
+Parameter:
+	       id:
+		       handle for debug log
+	       level:
+		       debug level
+	       data:
+		       pointer to data for debug entry
+	       length:
+		       length of data in bytes
+
+Return Value:
+	       Address of written debug entry
+
+Description:
+	       writes debug entry to active debug area (if level <= actual
+	       debug level) and switches to next debug area
+
+---------------------------------------------------------------------------
+
+::
+
+  debug_entry_t* debug_int_exception (debug_info_t * id, int level,
+				      unsigned int data);
+  debug_entry_t* debug_long_exception(debug_info_t * id, int level,
+				      unsigned long data);
+
+Parameter:     id:     handle for debug log
+	       level:  debug level
+	       data:   integer value for debug entry
+
+Return Value:  Address of written debug entry
+
+Description:   writes debug entry to active debug area (if level <= actual
+	       debug level) and switches to next debug area
+
+---------------------------------------------------------------------------
+
+::
+
+  debug_entry_t* debug_text_exception (debug_info_t * id, int level,
+				       const char* data);
+
+Parameter:     id:     handle for debug log
+	       level:  debug level
+	       data:   string for debug entry
+
+Return Value:  Address of written debug entry
+
+Description:   writes debug entry in ascii format to active debug area
+	       (if level <= actual debug level) and switches to next debug
+	       area
+
+---------------------------------------------------------------------------
+
+::
+
+  debug_entry_t* debug_sprintf_exception (debug_info_t * id, int level,
+					  char* string,...);
+
+Parameter:     id:    handle for debug log
+	       level: debug level
+	       string: format string for debug entry
+	       ...: varargs used as in sprintf()
+
+Return Value:  Address of written debug entry
+
+Description:   writes debug entry with format string and varargs (longs) to
+	       active debug area (if level $<=$ actual debug level) and
+	       switches to next debug area.
+	       floats and long long datatypes cannot be used as varargs.
+
+---------------------------------------------------------------------------
+
+::
+
+  int debug_register_view (debug_info_t * id, struct debug_view *view);
+
+Parameter:     id:    handle for debug log
+	       view:  pointer to debug view struct
+
+Return Value:  0  : ok
+	       < 0: Error
+
+Description:   registers new debug view and creates debugfs dir entry
+
+---------------------------------------------------------------------------
+
+::
+
+  int debug_unregister_view (debug_info_t * id, struct debug_view *view);
+
+Parameter:     id:    handle for debug log
+	       view:  pointer to debug view struct
+
+Return Value:  0  : ok
+	       < 0: Error
+
+Description:   unregisters debug view and removes debugfs dir entry
+
+
+
+Predefined views:
+-----------------
+
+extern struct debug_view debug_hex_ascii_view;
+
+extern struct debug_view debug_raw_view;
+
+extern struct debug_view debug_sprintf_view;
+
+Examples
+--------
+
+::
+
+  /*
+   * hex_ascii- + raw-view Example
+   */
+
+  #include <linux/init.h>
+  #include <asm/debug.h>
+
+  static debug_info_t* debug_info;
+
+  static int init(void)
+  {
+      /* register 4 debug areas with one page each and 4 byte data field */
+
+      debug_info = debug_register ("test", 1, 4, 4 );
+      debug_register_view(debug_info,&debug_hex_ascii_view);
+      debug_register_view(debug_info,&debug_raw_view);
+
+      debug_text_event(debug_info, 4 , "one ");
+      debug_int_exception(debug_info, 4, 4711);
+      debug_event(debug_info, 3, &debug_info, 4);
+
+      return 0;
+  }
+
+  static void cleanup(void)
+  {
+      debug_unregister (debug_info);
+  }
+
+  module_init(init);
+  module_exit(cleanup);
+
+---------------------------------------------------------------------------
+
+::
+
+  /*
+   * sprintf-view Example
+   */
+
+  #include <linux/init.h>
+  #include <asm/debug.h>
+
+  static debug_info_t* debug_info;
+
+  static int init(void)
+  {
+      /* register 4 debug areas with one page each and data field for */
+      /* format string pointer + 2 varargs (= 3 * sizeof(long))       */
+
+      debug_info = debug_register ("test", 1, 4, sizeof(long) * 3);
+      debug_register_view(debug_info,&debug_sprintf_view);
+
+      debug_sprintf_event(debug_info, 2 , "first event in %s:%i\n",__FILE__,__LINE__);
+      debug_sprintf_exception(debug_info, 1, "pointer to debug info: %p\n",&debug_info);
+
+      return 0;
+  }
+
+  static void cleanup(void)
+  {
+      debug_unregister (debug_info);
+  }
+
+  module_init(init);
+  module_exit(cleanup);
+
+Debugfs Interface
+-----------------
+Views to the debug logs can be investigated through reading the corresponding
+debugfs-files:
+
+Example::
+
+  > ls /sys/kernel/debug/s390dbf/dasd
+  flush  hex_ascii  level pages raw
+  > cat /sys/kernel/debug/s390dbf/dasd/hex_ascii | sort -k2,2 -s
+  00 00974733272:680099 2 - 02 0006ad7e  07 ea 4a 90 | ....
+  00 00974733272:682210 2 - 02 0006ade6  46 52 45 45 | FREE
+  00 00974733272:682213 2 - 02 0006adf6  07 ea 4a 90 | ....
+  00 00974733272:682281 1 * 02 0006ab08  41 4c 4c 43 | EXCP
+  01 00974733272:682284 2 - 02 0006ab16  45 43 4b 44 | ECKD
+  01 00974733272:682287 2 - 02 0006ab28  00 00 00 04 | ....
+  01 00974733272:682289 2 - 02 0006ab3e  00 00 00 20 | ...
+  01 00974733272:682297 2 - 02 0006ad7e  07 ea 4a 90 | ....
+  01 00974733272:684384 2 - 00 0006ade6  46 52 45 45 | FREE
+  01 00974733272:684388 2 - 00 0006adf6  07 ea 4a 90 | ....
+
+See section about predefined views for explanation of the above output!
+
+Changing the debug level
+------------------------
+
+Example::
+
+
+  > cat /sys/kernel/debug/s390dbf/dasd/level
+  3
+  > echo "5" > /sys/kernel/debug/s390dbf/dasd/level
+  > cat /sys/kernel/debug/s390dbf/dasd/level
+  5
+
+Flushing debug areas
+--------------------
+Debug areas can be flushed with piping the number of the desired
+area (0...n) to the debugfs file "flush". When using "-" all debug areas
+are flushed.
+
+Examples:
+
+1. Flush debug area 0::
+
+     > echo "0" > /sys/kernel/debug/s390dbf/dasd/flush
+
+2. Flush all debug areas::
+
+     > echo "-" > /sys/kernel/debug/s390dbf/dasd/flush
+
+Changing the size of debug areas
+------------------------------------
+It is possible the change the size of debug areas through piping
+the number of pages to the debugfs file "pages". The resize request will
+also flush the debug areas.
+
+Example:
+
+Define 4 pages for the debug areas of debug feature "dasd"::
+
+  > echo "4" > /sys/kernel/debug/s390dbf/dasd/pages
+
+Stooping the debug feature
+--------------------------
+Example:
+
+1. Check if stopping is allowed::
+
+     > cat /proc/sys/s390dbf/debug_stoppable
+
+2. Stop debug feature::
+
+     > echo 0 > /proc/sys/s390dbf/debug_active
+
+lcrash Interface
+----------------
+It is planned that the dump analysis tool lcrash gets an additional command
+'s390dbf' to display all the debug logs. With this tool it will be possible
+to investigate the debug logs on a live system and with a memory dump after
+a system crash.
+
+Investigating raw memory
+------------------------
+One last possibility to investigate the debug logs at a live
+system and after a system crash is to look at the raw memory
+under VM or at the Service Element.
+It is possible to find the anker of the debug-logs through
+the 'debug_area_first' symbol in the System map. Then one has
+to follow the correct pointers of the data-structures defined
+in debug.h and find the debug-areas in memory.
+Normally modules which use the debug feature will also have
+a global variable with the pointer to the debug-logs. Following
+this pointer it will also be possible to find the debug logs in
+memory.
+
+For this method it is recommended to use '16 * x + 4' byte (x = 0..n)
+for the length of the data field in debug_register() in
+order to see the debug entries well formatted.
+
+
+Predefined Views
+----------------
+
+There are three predefined views: hex_ascii, raw and sprintf.
+The hex_ascii view shows the data field in hex and ascii representation
+(e.g. '45 43 4b 44 | ECKD').
+The raw view returns a bytestream as the debug areas are stored in memory.
+
+The sprintf view formats the debug entries in the same way as the sprintf
+function would do. The sprintf event/exception functions write to the
+debug entry a pointer to the format string (size = sizeof(long))
+and for each vararg a long value. So e.g. for a debug entry with a format
+string plus two varargs one would need to allocate a (3 * sizeof(long))
+byte data area in the debug_register() function.
+
+IMPORTANT:
+  Using "%s" in sprintf event functions is dangerous. You can only
+  use "%s" in the sprintf event functions, if the memory for the passed string
+  is available as long as the debug feature exists. The reason behind this is
+  that due to performance considerations only a pointer to the string is stored
+  in  the debug feature. If you log a string that is freed afterwards, you will
+  get an OOPS when inspecting the debug feature, because then the debug feature
+  will access the already freed memory.
+
+NOTE:
+  If using the sprintf view do NOT use other event/exception functions
+  than the sprintf-event and -exception functions.
+
+The format of the hex_ascii and sprintf view is as follows:
+
+- Number of area
+- Timestamp (formatted as seconds and microseconds since 00:00:00 Coordinated
+  Universal Time (UTC), January 1, 1970)
+- level of debug entry
+- Exception flag (* = Exception)
+- Cpu-Number of calling task
+- Return Address to caller
+- data field
+
+The format of the raw view is:
+
+- Header as described in debug.h
+- datafield
+
+A typical line of the hex_ascii view will look like the following (first line
+is only for explanation and will not be displayed when 'cating' the view):
+
+area  time           level exception cpu caller    data (hex + ascii)
+--------------------------------------------------------------------------
+00    00964419409:440690 1 -         00  88023fe
+
+
+Defining views
+--------------
+
+Views are specified with the 'debug_view' structure. There are defined
+callback functions which are used for reading and writing the debugfs files::
+
+  struct debug_view {
+	char name[DEBUG_MAX_PROCF_LEN];
+	debug_prolog_proc_t* prolog_proc;
+	debug_header_proc_t* header_proc;
+	debug_format_proc_t* format_proc;
+	debug_input_proc_t*  input_proc;
+	void*                private_data;
+  };
+
+where::
+
+  typedef int (debug_header_proc_t) (debug_info_t* id,
+				     struct debug_view* view,
+				     int area,
+				     debug_entry_t* entry,
+				     char* out_buf);
+
+  typedef int (debug_format_proc_t) (debug_info_t* id,
+				     struct debug_view* view, char* out_buf,
+				     const char* in_buf);
+  typedef int (debug_prolog_proc_t) (debug_info_t* id,
+				     struct debug_view* view,
+				     char* out_buf);
+  typedef int (debug_input_proc_t) (debug_info_t* id,
+				    struct debug_view* view,
+				    struct file* file, const char* user_buf,
+				    size_t in_buf_size, loff_t* offset);
+
+
+The "private_data" member can be used as pointer to view specific data.
+It is not used by the debug feature itself.
+
+The output when reading a debugfs file is structured like this::
+
+  "prolog_proc output"
+
+  "header_proc output 1"  "format_proc output 1"
+  "header_proc output 2"  "format_proc output 2"
+  "header_proc output 3"  "format_proc output 3"
+  ...
+
+When a view is read from the debugfs, the Debug Feature calls the
+'prolog_proc' once for writing the prolog.
+Then 'header_proc' and 'format_proc' are called for each
+existing debug entry.
+
+The input_proc can be used to implement functionality when it is written to
+the view (e.g. like with 'echo "0" > /sys/kernel/debug/s390dbf/dasd/level).
+
+For header_proc there can be used the default function
+debug_dflt_header_fn() which is defined in debug.h.
+and which produces the same header output as the predefined views.
+E.g::
+
+  00 00964419409:440761 2 - 00 88023ec
+
+In order to see how to use the callback functions check the implementation
+of the default views!
+
+Example::
+
+  #include <asm/debug.h>
+
+  #define UNKNOWNSTR "data: %08x"
+
+  const char* messages[] =
+  {"This error...........\n",
+   "That error...........\n",
+   "Problem..............\n",
+   "Something went wrong.\n",
+   "Everything ok........\n",
+   NULL
+  };
+
+  static int debug_test_format_fn(
+     debug_info_t * id, struct debug_view *view,
+     char *out_buf, const char *in_buf
+  )
+  {
+    int i, rc = 0;
+
+    if(id->buf_size >= 4) {
+       int msg_nr = *((int*)in_buf);
+       if(msg_nr < sizeof(messages)/sizeof(char*) - 1)
+	  rc += sprintf(out_buf, "%s", messages[msg_nr]);
+       else
+	  rc += sprintf(out_buf, UNKNOWNSTR, msg_nr);
+    }
+   out:
+     return rc;
+  }
+
+  struct debug_view debug_test_view = {
+    "myview",                 /* name of view */
+    NULL,                     /* no prolog */
+    &debug_dflt_header_fn,    /* default header for each entry */
+    &debug_test_format_fn,    /* our own format function */
+    NULL,                     /* no input function */
+    NULL                      /* no private data */
+  };
+
+test:
+=====
+
+::
+
+  debug_info_t *debug_info;
+  ...
+  debug_info = debug_register ("test", 0, 4, 4 ));
+  debug_register_view(debug_info, &debug_test_view);
+  for(i = 0; i < 10; i ++) debug_int_event(debug_info, 1, i);
+
+  > cat /sys/kernel/debug/s390dbf/test/myview
+  00 00964419734:611402 1 - 00 88042ca   This error...........
+  00 00964419734:611405 1 - 00 88042ca   That error...........
+  00 00964419734:611408 1 - 00 88042ca   Problem..............
+  00 00964419734:611411 1 - 00 88042ca   Something went wrong.
+  00 00964419734:611414 1 - 00 88042ca   Everything ok........
+  00 00964419734:611417 1 - 00 88042ca   data: 00000005
+  00 00964419734:611419 1 - 00 88042ca   data: 00000006
+  00 00964419734:611422 1 - 00 88042ca   data: 00000007
+  00 00964419734:611425 1 - 00 88042ca   data: 00000008
+  00 00964419734:611428 1 - 00 88042ca   data: 00000009
diff --git a/Documentation/s390/s390dbf.txt b/Documentation/s390/s390dbf.txt
deleted file mode 100644
index 61329fd62e89..000000000000
--- a/Documentation/s390/s390dbf.txt
+++ /dev/null
@@ -1,667 +0,0 @@
-S390 Debug Feature
-==================
-
-files: arch/s390/kernel/debug.c
-       arch/s390/include/asm/debug.h
-
-Description:
-------------
-The goal of this feature is to provide a kernel debug logging API 
-where log records can be stored efficiently in memory, where each component 
-(e.g. device drivers) can have one separate debug log.
-One purpose of this is to inspect the debug logs after a production system crash
-in order to analyze the reason for the crash.
-If the system still runs but only a subcomponent which uses dbf fails,
-it is possible to look at the debug logs on a live system via the Linux
-debugfs filesystem.
-The debug feature may also very useful for kernel and driver development.
-
-Design:
--------
-Kernel components (e.g. device drivers) can register themselves at the debug 
-feature with the function call debug_register(). This function initializes a 
-debug log for the caller. For each debug log exists a number of debug areas 
-where exactly one is active at one time.  Each debug area consists of contiguous
-pages in memory. In the debug areas there are stored debug entries (log records)
-which are written by event- and exception-calls. 
-
-An event-call writes the specified debug entry to the active debug
-area and updates the log pointer for the active area. If the end 
-of the active debug area is reached, a wrap around is done (ring buffer) 
-and the next debug entry will be written at the beginning of the active 
-debug area.
-
-An exception-call writes the specified debug entry to the log and
-switches to the next debug area. This is done in order to be sure
-that the records which describe the origin of the exception are not
-overwritten when a wrap around for the current area occurs.
-
-The debug areas themselves are also ordered in form of a ring buffer.
-When an exception is thrown in the last debug area, the following debug 
-entries are then written again in the very first area.
-
-There are three versions for the event- and exception-calls: One for
-logging raw data, one for text and one for numbers.
-
-Each debug entry contains the following data:
-
-- Timestamp
-- Cpu-Number of calling task
-- Level of debug entry (0...6)
-- Return Address to caller
-- Flag, if entry is an exception or not
-
-The debug logs can be inspected in a live system through entries in
-the debugfs-filesystem. Under the toplevel directory "s390dbf" there is
-a directory for each registered component, which is named like the
-corresponding component. The debugfs normally should be mounted to
-/sys/kernel/debug therefore the debug feature can be accessed under
-/sys/kernel/debug/s390dbf.
-
-The content of the directories are files which represent different views
-to the debug log. Each component can decide which views should be
-used through registering them with the function debug_register_view().
-Predefined views for hex/ascii, sprintf and raw binary data are provided.
-It is also possible to define other views. The content of
-a view can be inspected simply by reading the corresponding debugfs file.
-
-All debug logs have an actual debug level (range from 0 to 6).
-The default level is 3. Event and Exception functions have a 'level'
-parameter. Only debug entries with a level that is lower or equal
-than the actual level are written to the log. This means, when
-writing events, high priority log entries should have a low level
-value whereas low priority entries should have a high one.
-The actual debug level can be changed with the help of the debugfs-filesystem
-through writing a number string "x" to the 'level' debugfs file which is
-provided for every debug log. Debugging can be switched off completely
-by using "-" on the 'level' debugfs file.
-
-Example:
-
-> echo "-" > /sys/kernel/debug/s390dbf/dasd/level
-
-It is also possible to deactivate the debug feature globally for every
-debug log. You can change the behavior using  2 sysctl parameters in
-/proc/sys/s390dbf:
-There are currently 2 possible triggers, which stop the debug feature
-globally. The first possibility is to use the "debug_active" sysctl. If
-set to 1 the debug feature is running. If "debug_active" is set to 0 the
-debug feature is turned off.
-The second trigger which stops the debug feature is a kernel oops.
-That prevents the debug feature from overwriting debug information that
-happened before the oops. After an oops you can reactivate the debug feature
-by piping 1 to /proc/sys/s390dbf/debug_active. Nevertheless, its not
-suggested to use an oopsed kernel in a production environment.
-If you want to disallow the deactivation of the debug feature, you can use
-the "debug_stoppable" sysctl. If you set "debug_stoppable" to 0 the debug
-feature cannot be stopped. If the debug feature is already stopped, it
-will stay deactivated.
-
-Kernel Interfaces:
-------------------
-
-----------------------------------------------------------------------------
-debug_info_t *debug_register(char *name, int pages, int nr_areas,
-                             int buf_size);
-
-Parameter:    name:        Name of debug log (e.g. used for debugfs entry)
-              pages:       number of pages, which will be allocated per area
-              nr_areas:    number of debug areas
-              buf_size:    size of data area in each debug entry
-
-Return Value: Handle for generated debug area   
-              NULL if register failed 
-
-Description:  Allocates memory for a debug log     
-              Must not be called within an interrupt handler 
-
-----------------------------------------------------------------------------
-debug_info_t *debug_register_mode(char *name, int pages, int nr_areas,
-				  int buf_size, mode_t mode, uid_t uid,
-				  gid_t gid);
-
-Parameter:    name:	   Name of debug log (e.g. used for debugfs entry)
-	      pages:	   Number of pages, which will be allocated per area
-	      nr_areas:    Number of debug areas
-	      buf_size:    Size of data area in each debug entry
-	      mode:	   File mode for debugfs files. E.g. S_IRWXUGO
-	      uid:	   User ID for debugfs files. Currently only 0 is
-			   supported.
-	      gid:	   Group ID for debugfs files. Currently only 0 is
-			   supported.
-
-Return Value: Handle for generated debug area
-	      NULL if register failed
-
-Description:  Allocates memory for a debug log
-	      Must not be called within an interrupt handler
-
----------------------------------------------------------------------------
-void debug_unregister (debug_info_t * id);
-
-Parameter:     id:   handle for debug log  
-
-Return Value:  none 
-
-Description:   frees memory for a debug log and removes all registered debug
-	       views.
-               Must not be called within an interrupt handler 
-
----------------------------------------------------------------------------
-void debug_set_level (debug_info_t * id, int new_level);
-
-Parameter:     id:        handle for debug log  
-               new_level: new debug level 
-
-Return Value:  none 
-
-Description:   Sets new actual debug level if new_level is valid. 
-
----------------------------------------------------------------------------
-bool debug_level_enabled (debug_info_t * id, int level);
-
-Parameter:    id:	  handle for debug log
-	      level:	  debug level
-
-Return Value: True if level is less or equal to the current debug level.
-
-Description:  Returns true if debug events for the specified level would be
-	      logged. Otherwise returns false.
----------------------------------------------------------------------------
-void debug_stop_all(void);
-
-Parameter:     none
-
-Return Value:  none
-
-Description:   stops the debug feature if stopping is allowed. Currently
-               used in case of a kernel oops.
-
----------------------------------------------------------------------------
-debug_entry_t* debug_event (debug_info_t* id, int level, void* data, 
-                            int length);
-
-Parameter:     id:     handle for debug log  
-               level:  debug level           
-               data:   pointer to data for debug entry  
-               length: length of data in bytes       
-
-Return Value:  Address of written debug entry 
-
-Description:   writes debug entry to active debug area (if level <= actual 
-               debug level)    
-
----------------------------------------------------------------------------
-debug_entry_t* debug_int_event (debug_info_t * id, int level, 
-                                unsigned int data);
-debug_entry_t* debug_long_event(debug_info_t * id, int level,
-                                unsigned long data);
-
-Parameter:     id:     handle for debug log  
-               level:  debug level           
-               data:   integer value for debug entry           
-
-Return Value:  Address of written debug entry 
-
-Description:   writes debug entry to active debug area (if level <= actual 
-               debug level)    
-
----------------------------------------------------------------------------
-debug_entry_t* debug_text_event (debug_info_t * id, int level, 
-                                 const char* data);
-
-Parameter:     id:     handle for debug log  
-               level:  debug level           
-               data:   string for debug entry  
-
-Return Value:  Address of written debug entry 
-
-Description:   writes debug entry in ascii format to active debug area 
-               (if level <= actual debug level)     
-
----------------------------------------------------------------------------
-debug_entry_t* debug_sprintf_event (debug_info_t * id, int level, 
-                                    char* string,...);
-
-Parameter:     id:    handle for debug log 
-               level: debug level
-               string: format string for debug entry 
-               ...: varargs used as in sprintf()
-
-Return Value:  Address of written debug entry
-
-Description:   writes debug entry with format string and varargs (longs) to 
-               active debug area (if level $<=$ actual debug level). 
-               floats and long long datatypes cannot be used as varargs.
-
----------------------------------------------------------------------------
-
-debug_entry_t* debug_exception (debug_info_t* id, int level, void* data, 
-                                int length);
-
-Parameter:     id:     handle for debug log  
-               level:  debug level           
-               data:   pointer to data for debug entry  
-               length: length of data in bytes       
-
-Return Value:  Address of written debug entry 
-
-Description:   writes debug entry to active debug area (if level <= actual 
-               debug level) and switches to next debug area  
-
----------------------------------------------------------------------------
-debug_entry_t* debug_int_exception (debug_info_t * id, int level, 
-                                    unsigned int data);
-debug_entry_t* debug_long_exception(debug_info_t * id, int level,
-                                    unsigned long data);
-
-Parameter:     id:     handle for debug log  
-               level:  debug level           
-               data:   integer value for debug entry           
-
-Return Value:  Address of written debug entry 
-
-Description:   writes debug entry to active debug area (if level <= actual 
-               debug level) and switches to next debug area  
-
----------------------------------------------------------------------------
-debug_entry_t* debug_text_exception (debug_info_t * id, int level, 
-                                     const char* data);
-
-Parameter:     id:     handle for debug log  
-               level:  debug level           
-               data:   string for debug entry  
-
-Return Value:  Address of written debug entry 
-
-Description:   writes debug entry in ascii format to active debug area 
-               (if level <= actual debug level) and switches to next debug 
-               area  
-
----------------------------------------------------------------------------
-debug_entry_t* debug_sprintf_exception (debug_info_t * id, int level,
-                                        char* string,...);
-
-Parameter:     id:    handle for debug log  
-               level: debug level  
-               string: format string for debug entry  
-               ...: varargs used as in sprintf()
-
-Return Value:  Address of written debug entry 
-
-Description:   writes debug entry with format string and varargs (longs) to 
-               active debug area (if level $<=$ actual debug level) and
-               switches to next debug area. 
-               floats and long long datatypes cannot be used as varargs.
-
----------------------------------------------------------------------------
-
-int debug_register_view (debug_info_t * id, struct debug_view *view);
-
-Parameter:     id:    handle for debug log  
-               view:  pointer to debug view struct 
-
-Return Value:  0  : ok 
-               < 0: Error 
-
-Description:   registers new debug view and creates debugfs dir entry
-
----------------------------------------------------------------------------
-int debug_unregister_view (debug_info_t * id, struct debug_view *view); 
-
-Parameter:     id:    handle for debug log  
-               view:  pointer to debug view struct 
-
-Return Value:  0  : ok 
-               < 0: Error 
-
-Description:   unregisters debug view and removes debugfs dir entry
-
-
-
-Predefined views:
------------------
-
-extern struct debug_view debug_hex_ascii_view;
-extern struct debug_view debug_raw_view;
-extern struct debug_view debug_sprintf_view;
-
-Examples
---------
-
-/*
- * hex_ascii- + raw-view Example
- */
-
-#include <linux/init.h>
-#include <asm/debug.h>
-
-static debug_info_t* debug_info;
-
-static int init(void)
-{
-    /* register 4 debug areas with one page each and 4 byte data field */
-
-    debug_info = debug_register ("test", 1, 4, 4 );
-    debug_register_view(debug_info,&debug_hex_ascii_view);
-    debug_register_view(debug_info,&debug_raw_view);
-
-    debug_text_event(debug_info, 4 , "one ");
-    debug_int_exception(debug_info, 4, 4711);
-    debug_event(debug_info, 3, &debug_info, 4);
-
-    return 0;
-}
-
-static void cleanup(void)
-{
-    debug_unregister (debug_info);
-}
-
-module_init(init);
-module_exit(cleanup);
-
----------------------------------------------------------------------------
-
-/*
- * sprintf-view Example
- */
-
-#include <linux/init.h>
-#include <asm/debug.h>
-
-static debug_info_t* debug_info;
-
-static int init(void)
-{
-    /* register 4 debug areas with one page each and data field for */
-    /* format string pointer + 2 varargs (= 3 * sizeof(long))       */
-
-    debug_info = debug_register ("test", 1, 4, sizeof(long) * 3);
-    debug_register_view(debug_info,&debug_sprintf_view);
-
-    debug_sprintf_event(debug_info, 2 , "first event in %s:%i\n",__FILE__,__LINE__);
-    debug_sprintf_exception(debug_info, 1, "pointer to debug info: %p\n",&debug_info);
-
-    return 0;
-}
-
-static void cleanup(void)
-{
-    debug_unregister (debug_info);
-}
-
-module_init(init);
-module_exit(cleanup);
-
-
-
-Debugfs Interface
-----------------
-Views to the debug logs can be investigated through reading the corresponding 
-debugfs-files:
-
-Example:
-
-> ls /sys/kernel/debug/s390dbf/dasd
-flush  hex_ascii  level pages raw
-> cat /sys/kernel/debug/s390dbf/dasd/hex_ascii | sort -k2,2 -s
-00 00974733272:680099 2 - 02 0006ad7e  07 ea 4a 90 | ....
-00 00974733272:682210 2 - 02 0006ade6  46 52 45 45 | FREE
-00 00974733272:682213 2 - 02 0006adf6  07 ea 4a 90 | ....
-00 00974733272:682281 1 * 02 0006ab08  41 4c 4c 43 | EXCP 
-01 00974733272:682284 2 - 02 0006ab16  45 43 4b 44 | ECKD
-01 00974733272:682287 2 - 02 0006ab28  00 00 00 04 | ....
-01 00974733272:682289 2 - 02 0006ab3e  00 00 00 20 | ... 
-01 00974733272:682297 2 - 02 0006ad7e  07 ea 4a 90 | ....
-01 00974733272:684384 2 - 00 0006ade6  46 52 45 45 | FREE
-01 00974733272:684388 2 - 00 0006adf6  07 ea 4a 90 | ....
-
-See section about predefined views for explanation of the above output!
-
-Changing the debug level
-------------------------
-
-Example:
-
-
-> cat /sys/kernel/debug/s390dbf/dasd/level
-3
-> echo "5" > /sys/kernel/debug/s390dbf/dasd/level
-> cat /sys/kernel/debug/s390dbf/dasd/level
-5
-
-Flushing debug areas
---------------------
-Debug areas can be flushed with piping the number of the desired
-area (0...n) to the debugfs file "flush". When using "-" all debug areas
-are flushed.
-
-Examples:
-
-1. Flush debug area 0:
-> echo "0" > /sys/kernel/debug/s390dbf/dasd/flush
-
-2. Flush all debug areas:
-> echo "-" > /sys/kernel/debug/s390dbf/dasd/flush
-
-Changing the size of debug areas
-------------------------------------
-It is possible the change the size of debug areas through piping
-the number of pages to the debugfs file "pages". The resize request will
-also flush the debug areas.
-
-Example:
-
-Define 4 pages for the debug areas of debug feature "dasd":
-> echo "4" > /sys/kernel/debug/s390dbf/dasd/pages
-
-Stooping the debug feature
---------------------------
-Example:
-
-1. Check if stopping is allowed
-> cat /proc/sys/s390dbf/debug_stoppable
-2. Stop debug feature
-> echo 0 > /proc/sys/s390dbf/debug_active
-
-lcrash Interface
-----------------
-It is planned that the dump analysis tool lcrash gets an additional command
-'s390dbf' to display all the debug logs. With this tool it will be possible 
-to investigate the debug logs on a live system and with a memory dump after 
-a system crash.
-
-Investigating raw memory
-------------------------
-One last possibility to investigate the debug logs at a live
-system and after a system crash is to look at the raw memory
-under VM or at the Service Element.
-It is possible to find the anker of the debug-logs through
-the 'debug_area_first' symbol in the System map. Then one has
-to follow the correct pointers of the data-structures defined
-in debug.h and find the debug-areas in memory.
-Normally modules which use the debug feature will also have
-a global variable with the pointer to the debug-logs. Following
-this pointer it will also be possible to find the debug logs in
-memory.
-
-For this method it is recommended to use '16 * x + 4' byte (x = 0..n)
-for the length of the data field in debug_register() in
-order to see the debug entries well formatted.
-
-
-Predefined Views
-----------------
-
-There are three predefined views: hex_ascii, raw and sprintf. 
-The hex_ascii view shows the data field in hex and ascii representation 
-(e.g. '45 43 4b 44 | ECKD'). 
-The raw view returns a bytestream as the debug areas are stored in memory.
-
-The sprintf view formats the debug entries in the same way as the sprintf
-function would do. The sprintf event/exception functions write to the
-debug entry a pointer to the format string (size = sizeof(long)) 
-and for each vararg a long value. So e.g. for a debug entry with a format 
-string plus two varargs one would need to allocate a (3 * sizeof(long)) 
-byte data area in the debug_register() function.
-
-IMPORTANT: Using "%s" in sprintf event functions is dangerous. You can only
-use "%s" in the sprintf event functions, if the memory for the passed string is
-available as long as the debug feature exists. The reason behind this is that
-due to performance considerations only a pointer to the string is stored in
-the debug feature. If you log a string that is freed afterwards, you will get
-an OOPS when inspecting the debug feature, because then the debug feature will
-access the already freed memory.
-
-NOTE: If using the sprintf view do NOT use other event/exception functions
-than the sprintf-event and -exception functions.
-
-The format of the hex_ascii and sprintf view is as follows:
-- Number of area
-- Timestamp (formatted as seconds and microseconds since 00:00:00 Coordinated 
-  Universal Time (UTC), January 1, 1970)
-- level of debug entry
-- Exception flag (* = Exception)
-- Cpu-Number of calling task
-- Return Address to caller
-- data field
-
-The format of the raw view is:
-- Header as described in debug.h
-- datafield 
-
-A typical line of the hex_ascii view will look like the following (first line 
-is only for explanation and will not be displayed when 'cating' the view):
-
-area  time           level exception cpu caller    data (hex + ascii)
---------------------------------------------------------------------------
-00    00964419409:440690 1 -         00  88023fe   
-
-
-Defining views
---------------
-
-Views are specified with the 'debug_view' structure. There are defined
-callback functions which are used for reading and writing the debugfs files:
-
-struct debug_view {
-        char name[DEBUG_MAX_PROCF_LEN];  
-        debug_prolog_proc_t* prolog_proc; 
-        debug_header_proc_t* header_proc;
-        debug_format_proc_t* format_proc;
-        debug_input_proc_t*  input_proc;
-	void*                private_data;
-};
-
-where
-
-typedef int (debug_header_proc_t) (debug_info_t* id,
-                                   struct debug_view* view,
-                                   int area,
-                                   debug_entry_t* entry,
-                                   char* out_buf);
-
-typedef int (debug_format_proc_t) (debug_info_t* id,
-                                   struct debug_view* view, char* out_buf,
-                                   const char* in_buf);
-typedef int (debug_prolog_proc_t) (debug_info_t* id,
-                                   struct debug_view* view,
-                                   char* out_buf);
-typedef int (debug_input_proc_t) (debug_info_t* id,
-                                  struct debug_view* view,
-                                  struct file* file, const char* user_buf,
-                                  size_t in_buf_size, loff_t* offset);
-
-
-The "private_data" member can be used as pointer to view specific data.
-It is not used by the debug feature itself.
-
-The output when reading a debugfs file is structured like this:
-
-"prolog_proc output"
-
-"header_proc output 1"  "format_proc output 1"
-"header_proc output 2"  "format_proc output 2"
-"header_proc output 3"  "format_proc output 3"
-...
-
-When a view is read from the debugfs, the Debug Feature calls the
-'prolog_proc' once for writing the prolog.
-Then 'header_proc' and 'format_proc' are called for each 
-existing debug entry.
-
-The input_proc can be used to implement functionality when it is written to 
-the view (e.g. like with 'echo "0" > /sys/kernel/debug/s390dbf/dasd/level).
-
-For header_proc there can be used the default function
-debug_dflt_header_fn() which is defined in debug.h.
-and which produces the same header output as the predefined views.
-E.g:
-00 00964419409:440761 2 - 00 88023ec
-
-In order to see how to use the callback functions check the implementation
-of the default views!
-
-Example
-
-#include <asm/debug.h>
-
-#define UNKNOWNSTR "data: %08x"
-
-const char* messages[] =
-{"This error...........\n",
- "That error...........\n",
- "Problem..............\n",
- "Something went wrong.\n",
- "Everything ok........\n",
- NULL
-};
-
-static int debug_test_format_fn(
-   debug_info_t * id, struct debug_view *view, 
-   char *out_buf, const char *in_buf
-)
-{
-  int i, rc = 0;
-
-  if(id->buf_size >= 4) {
-     int msg_nr = *((int*)in_buf);
-     if(msg_nr < sizeof(messages)/sizeof(char*) - 1)
-        rc += sprintf(out_buf, "%s", messages[msg_nr]);	
-     else
-        rc += sprintf(out_buf, UNKNOWNSTR, msg_nr);
-  }
- out:
-   return rc;
-}
-
-struct debug_view debug_test_view = {
-  "myview",                 /* name of view */
-  NULL,                     /* no prolog */
-  &debug_dflt_header_fn,    /* default header for each entry */
-  &debug_test_format_fn,    /* our own format function */
-  NULL,                     /* no input function */
-  NULL                      /* no private data */
-};
-
-=====
-test:
-=====
-debug_info_t *debug_info;
-...
-debug_info = debug_register ("test", 0, 4, 4 ));
-debug_register_view(debug_info, &debug_test_view);
-for(i = 0; i < 10; i ++) debug_int_event(debug_info, 1, i);
-
-> cat /sys/kernel/debug/s390dbf/test/myview
-00 00964419734:611402 1 - 00 88042ca   This error...........
-00 00964419734:611405 1 - 00 88042ca   That error...........
-00 00964419734:611408 1 - 00 88042ca   Problem..............
-00 00964419734:611411 1 - 00 88042ca   Something went wrong.
-00 00964419734:611414 1 - 00 88042ca   Everything ok........
-00 00964419734:611417 1 - 00 88042ca   data: 00000005
-00 00964419734:611419 1 - 00 88042ca   data: 00000006
-00 00964419734:611422 1 - 00 88042ca   data: 00000007
-00 00964419734:611425 1 - 00 88042ca   data: 00000008
-00 00964419734:611428 1 - 00 88042ca   data: 00000009
diff --git a/Documentation/s390/text_files.rst b/Documentation/s390/text_files.rst
new file mode 100644
index 000000000000..c94d05d4fa17
--- /dev/null
+++ b/Documentation/s390/text_files.rst
@@ -0,0 +1,11 @@
+ibm 3270 changelog
+------------------
+
+.. include:: 3270.ChangeLog
+    :literal:
+
+ibm 3270 config3270.sh
+----------------------
+
+.. literalinclude:: config3270.sh
+    :language: shell
diff --git a/Documentation/s390/vfio-ap.txt b/Documentation/s390/vfio-ap.rst
similarity index 72%
rename from Documentation/s390/vfio-ap.txt
rename to Documentation/s390/vfio-ap.rst
index 65167cfe4485..b5c51f7c748d 100644
--- a/Documentation/s390/vfio-ap.txt
+++ b/Documentation/s390/vfio-ap.rst
@@ -1,4 +1,9 @@
-Introduction:
+===============================
+Adjunct Processor (AP) facility
+===============================
+
+
+Introduction
 ============
 The Adjunct Processor (AP) facility is an IBM Z cryptographic facility comprised
 of three AP instructions and from 1 up to 256 PCIe cryptographic adapter cards.
@@ -11,7 +16,7 @@ framework. This implementation relies considerably on the s390 virtualization
 facilities which do most of the hard work of providing direct access to AP
 devices.
 
-AP Architectural Overview:
+AP Architectural Overview
 =========================
 To facilitate the comprehension of the design, let's start with some
 definitions:
@@ -31,13 +36,13 @@ definitions:
   in the LPAR, the AP bus detects the AP adapter cards assigned to the LPAR and
   creates a sysfs device for each assigned adapter. For example, if AP adapters
   4 and 10 (0x0a) are assigned to the LPAR, the AP bus will create the following
-  sysfs device entries:
+  sysfs device entries::
 
     /sys/devices/ap/card04
     /sys/devices/ap/card0a
 
   Symbolic links to these devices will also be created in the AP bus devices
-  sub-directory:
+  sub-directory::
 
     /sys/bus/ap/devices/[card04]
     /sys/bus/ap/devices/[card04]
@@ -84,7 +89,7 @@ definitions:
   the cross product of the AP adapter and usage domain numbers detected when the
   AP bus module is loaded. For example, if adapters 4 and 10 (0x0a) and usage
   domains 6 and 71 (0x47) are assigned to the LPAR, the AP bus will create the
-  following sysfs entries:
+  following sysfs entries::
 
     /sys/devices/ap/card04/04.0006
     /sys/devices/ap/card04/04.0047
@@ -92,7 +97,7 @@ definitions:
     /sys/devices/ap/card0a/0a.0047
 
   The following symbolic links to these devices will be created in the AP bus
-  devices subdirectory:
+  devices subdirectory::
 
     /sys/bus/ap/devices/[04.0006]
     /sys/bus/ap/devices/[04.0047]
@@ -112,7 +117,7 @@ definitions:
   domain that is not one of the usage domains, but the modified domain
   must be one of the control domains.
 
-AP and SIE:
+AP and SIE
 ==========
 Let's now take a look at how AP instructions executed on a guest are interpreted
 by the hardware.
@@ -153,7 +158,7 @@ and 2 and usage domains 5 and 6 are assigned to a guest, the APQNs (1,5), (1,6),
 
 The APQNs can provide secure key functionality - i.e., a private key is stored
 on the adapter card for each of its domains - so each APQN must be assigned to
-at most one guest or to the linux host.
+at most one guest or to the linux host::
 
    Example 1: Valid configuration:
    ------------------------------
@@ -181,8 +186,8 @@ at most one guest or to the linux host.
    This is an invalid configuration because both guests have access to
    APQN (1,6).
 
-The Design:
-===========
+The Design
+==========
 The design introduces three new objects:
 
 1. AP matrix device
@@ -205,43 +210,43 @@ The VFIO AP (vfio_ap) device driver serves the following purposes:
 Reserve APQNs for exclusive use of KVM guests
 ---------------------------------------------
 The following block diagram illustrates the mechanism by which APQNs are
-reserved:
+reserved::
 
-                              +------------------+
-               7 remove       |                  |
-         +--------------------> cex4queue driver |
-         |                    |                  |
-         |                    +------------------+
-         |
-         |
-         |                    +------------------+          +-----------------+
-         |  5 register driver |                  | 3 create |                 |
-         |   +---------------->   Device core    +---------->  matrix device  |
-         |   |                |                  |          |                 |
-         |   |                +--------^---------+          +-----------------+
-         |   |                         |
-         |   |                         +-------------------+
-         |   | +-----------------------------------+       |
-         |   | |      4 register AP driver         |       | 2 register device
-         |   | |                                   |       |
-+--------+---+-v---+                      +--------+-------+-+
-|                  |                      |                  |
-|      ap_bus      +--------------------- >  vfio_ap driver  |
-|                  |       8 probe        |                  |
-+--------^---------+                      +--^--^------------+
-6 edit   |                                   |  |
-  apmask |     +-----------------------------+  | 9 mdev create
-  aqmask |     |           1 modprobe           |
-+--------+-----+---+           +----------------+-+         +------------------+
-|                  |           |                  |8 create |     mediated     |
-|      admin       |           | VFIO device core |--------->     matrix       |
-|                  +           |                  |         |     device       |
-+------+-+---------+           +--------^---------+         +--------^---------+
-       | |                              |                            |
-       | | 9 create vfio_ap-passthrough |                            |
-       | +------------------------------+                            |
-       +-------------------------------------------------------------+
-                   10  assign adapter/domain/control domain
+				+------------------+
+		 7 remove       |                  |
+	   +--------------------> cex4queue driver |
+	   |                    |                  |
+	   |                    +------------------+
+	   |
+	   |
+	   |                    +------------------+          +----------------+
+	   |  5 register driver |                  | 3 create |                |
+	   |   +---------------->   Device core    +---------->  matrix device |
+	   |   |                |                  |          |                |
+	   |   |                +--------^---------+          +----------------+
+	   |   |                         |
+	   |   |                         +-------------------+
+	   |   | +-----------------------------------+       |
+	   |   | |      4 register AP driver         |       | 2 register device
+	   |   | |                                   |       |
+  +--------+---+-v---+                      +--------+-------+-+
+  |                  |                      |                  |
+  |      ap_bus      +--------------------- >  vfio_ap driver  |
+  |                  |       8 probe        |                  |
+  +--------^---------+                      +--^--^------------+
+  6 edit   |                                   |  |
+    apmask |     +-----------------------------+  | 9 mdev create
+    aqmask |     |           1 modprobe           |
+  +--------+-----+---+           +----------------+-+         +----------------+
+  |                  |           |                  |8 create |     mediated   |
+  |      admin       |           | VFIO device core |--------->     matrix     |
+  |                  +           |                  |         |     device     |
+  +------+-+---------+           +--------^---------+         +--------^-------+
+	 | |                              |                            |
+	 | | 9 create vfio_ap-passthrough |                            |
+	 | +------------------------------+                            |
+	 +-------------------------------------------------------------+
+		     10  assign adapter/domain/control domain
 
 The process for reserving an AP queue for use by a KVM guest is:
 
@@ -250,7 +255,7 @@ The process for reserving an AP queue for use by a KVM guest is:
    device with the device core. This will serve as the parent device for
    all mediated matrix devices used to configure an AP matrix for a guest.
 3. The /sys/devices/vfio_ap/matrix device is created by the device core
-4  The vfio_ap device driver will register with the AP bus for AP queue devices
+4. The vfio_ap device driver will register with the AP bus for AP queue devices
    of type 10 and higher (CEX4 and newer). The driver will provide the vfio_ap
    driver's probe and remove callback interfaces. Devices older than CEX4 queues
    are not supported to simplify the implementation by not needlessly
@@ -266,13 +271,14 @@ The process for reserving an AP queue for use by a KVM guest is:
    it.
 9. The administrator creates a passthrough type mediated matrix device to be
    used by a guest
-10 The administrator assigns the adapters, usage domains and control domains
-   to be exclusively used by a guest.
+10. The administrator assigns the adapters, usage domains and control domains
+    to be exclusively used by a guest.
 
 Set up the VFIO mediated device interfaces
 ------------------------------------------
 The VFIO AP device driver utilizes the common interface of the VFIO mediated
 device core driver to:
+
 * Register an AP mediated bus driver to add a mediated matrix device to and
   remove it from a VFIO group.
 * Create and destroy a mediated matrix device
@@ -280,25 +286,25 @@ device core driver to:
 * Add a mediated matrix device to and remove it from an IOMMU group
 
 The following high-level block diagram shows the main components and interfaces
-of the VFIO AP mediated matrix device driver:
+of the VFIO AP mediated matrix device driver::
 
- +-------------+
- |             |
- | +---------+ | mdev_register_driver() +--------------+
- | |  Mdev   | +<-----------------------+              |
- | |  bus    | |                        | vfio_mdev.ko |
- | | driver  | +----------------------->+              |<-> VFIO user
- | +---------+ |    probe()/remove()    +--------------+    APIs
- |             |
- |  MDEV CORE  |
- |   MODULE    |
- |   mdev.ko   |
- | +---------+ | mdev_register_device() +--------------+
- | |Physical | +<-----------------------+              |
- | | device  | |                        |  vfio_ap.ko  |<-> matrix
- | |interface| +----------------------->+              |    device
- | +---------+ |       callback         +--------------+
- +-------------+
+   +-------------+
+   |             |
+   | +---------+ | mdev_register_driver() +--------------+
+   | |  Mdev   | +<-----------------------+              |
+   | |  bus    | |                        | vfio_mdev.ko |
+   | | driver  | +----------------------->+              |<-> VFIO user
+   | +---------+ |    probe()/remove()    +--------------+    APIs
+   |             |
+   |  MDEV CORE  |
+   |   MODULE    |
+   |   mdev.ko   |
+   | +---------+ | mdev_register_device() +--------------+
+   | |Physical | +<-----------------------+              |
+   | | device  | |                        |  vfio_ap.ko  |<-> matrix
+   | |interface| +----------------------->+              |    device
+   | +---------+ |       callback         +--------------+
+   +-------------+
 
 During initialization of the vfio_ap module, the matrix device is registered
 with an 'mdev_parent_ops' structure that provides the sysfs attribute
@@ -306,7 +312,8 @@ structures, mdev functions and callback interfaces for managing the mediated
 matrix device.
 
 * sysfs attribute structures:
-  * supported_type_groups
+
+  supported_type_groups
     The VFIO mediated device framework supports creation of user-defined
     mediated device types. These mediated device types are specified
     via the 'supported_type_groups' structure when a device is registered
@@ -318,61 +325,72 @@ matrix device.
 
     The VFIO AP device driver will register one mediated device type for
     passthrough devices:
+
       /sys/devices/vfio_ap/matrix/mdev_supported_types/vfio_ap-passthrough
+
     Only the read-only attributes required by the VFIO mdev framework will
-    be provided:
-        ... name
-        ... device_api
-        ... available_instances
-        ... device_api
-        Where:
-        * name: specifies the name of the mediated device type
-        * device_api: the mediated device type's API
-        * available_instances: the number of mediated matrix passthrough devices
-                               that can be created
-        * device_api: specifies the VFIO API
-  * mdev_attr_groups
+    be provided::
+
+	... name
+	... device_api
+	... available_instances
+	... device_api
+
+    Where:
+
+	* name:
+	    specifies the name of the mediated device type
+	* device_api:
+	    the mediated device type's API
+	* available_instances:
+	    the number of mediated matrix passthrough devices
+	    that can be created
+	* device_api:
+	    specifies the VFIO API
+  mdev_attr_groups
     This attribute group identifies the user-defined sysfs attributes of the
     mediated device. When a device is registered with the VFIO mediated device
     framework, the sysfs attribute files identified in the 'mdev_attr_groups'
     structure will be created in the mediated matrix device's directory. The
     sysfs attributes for a mediated matrix device are:
-    * assign_adapter:
-    * unassign_adapter:
+
+    assign_adapter / unassign_adapter:
       Write-only attributes for assigning/unassigning an AP adapter to/from the
       mediated matrix device. To assign/unassign an adapter, the APID of the
       adapter is echoed to the respective attribute file.
-    * assign_domain:
-    * unassign_domain:
+    assign_domain / unassign_domain:
       Write-only attributes for assigning/unassigning an AP usage domain to/from
       the mediated matrix device. To assign/unassign a domain, the domain
       number of the the usage domain is echoed to the respective attribute
       file.
-    * matrix:
+    matrix:
       A read-only file for displaying the APQNs derived from the cross product
       of the adapter and domain numbers assigned to the mediated matrix device.
-    * assign_control_domain:
-    * unassign_control_domain:
+    assign_control_domain / unassign_control_domain:
       Write-only attributes for assigning/unassigning an AP control domain
       to/from the mediated matrix device. To assign/unassign a control domain,
       the ID of the domain to be assigned/unassigned is echoed to the respective
       attribute file.
-    * control_domains:
+    control_domains:
       A read-only file for displaying the control domain numbers assigned to the
       mediated matrix device.
 
 * functions:
-  * create:
+
+  create:
     allocates the ap_matrix_mdev structure used by the vfio_ap driver to:
+
     * Store the reference to the KVM structure for the guest using the mdev
     * Store the AP matrix configuration for the adapters, domains, and control
       domains assigned via the corresponding sysfs attributes files
-  * remove:
+
+  remove:
     deallocates the mediated matrix device's ap_matrix_mdev structure. This will
     be allowed only if a running guest is not using the mdev.
 
 * callback interfaces
-  * open:
+
+  open:
     The vfio_ap driver uses this callback to register a
     VFIO_GROUP_NOTIFY_SET_KVM notifier callback function for the mdev matrix
     device. The open is invoked when QEMU connects the VFIO iommu group
@@ -380,16 +398,17 @@ matrix device.
     to configure the KVM guest is provided via this callback. The KVM structure,
     is used to configure the guest's access to the AP matrix defined via the
     mediated matrix device's sysfs attribute files.
-  * release:
+  release:
     unregisters the VFIO_GROUP_NOTIFY_SET_KVM notifier callback function for the
     mdev matrix device and deconfigures the guest's AP matrix.
 
-Configure the APM, AQM and ADM in the CRYCB:
+Configure the APM, AQM and ADM in the CRYCB
 -------------------------------------------
 Configuring the AP matrix for a KVM guest will be performed when the
 VFIO_GROUP_NOTIFY_SET_KVM notifier callback is invoked. The notifier
 function is called when QEMU connects to KVM. The guest's AP matrix is
 configured via it's CRYCB by:
+
 * Setting the bits in the APM corresponding to the APIDs assigned to the
   mediated matrix device via its 'assign_adapter' interface.
 * Setting the bits in the AQM corresponding to the domains assigned to the
@@ -418,12 +437,12 @@ available to a KVM guest via the following CPU model features:
 
 Note: If the user chooses to specify a CPU model different than the 'host'
 model to QEMU, the CPU model features and facilities need to be turned on
-explicitly; for example:
+explicitly; for example::
 
      /usr/bin/qemu-system-s390x ... -cpu z13,ap=on,apqci=on,apft=on
 
 A guest can be precluded from using AP features/facilities by turning them off
-explicitly; for example:
+explicitly; for example::
 
      /usr/bin/qemu-system-s390x ... -cpu host,ap=off,apqci=off,apft=off
 
@@ -435,7 +454,7 @@ the APFT facility is not installed on the guest, then the probe of device
 drivers will fail since only type 10 and newer devices can be configured for
 guest use.
 
-Example:
+Example
 =======
 Let's now provide an example to illustrate how KVM guests may be given
 access to AP facilities. For this example, we will show how to configure
@@ -444,30 +463,36 @@ look like this:
 
 Guest1
 ------
+=========== ===== ============
 CARD.DOMAIN TYPE  MODE
-------------------------------
+=========== ===== ============
 05          CEX5C CCA-Coproc
 05.0004     CEX5C CCA-Coproc
 05.00ab     CEX5C CCA-Coproc
 06          CEX5A Accelerator
 06.0004     CEX5A Accelerator
 06.00ab     CEX5C CCA-Coproc
+=========== ===== ============
 
 Guest2
 ------
+=========== ===== ============
 CARD.DOMAIN TYPE  MODE
-------------------------------
+=========== ===== ============
 05          CEX5A Accelerator
 05.0047     CEX5A Accelerator
 05.00ff     CEX5A Accelerator
+=========== ===== ============
 
 Guest2
 ------
+=========== ===== ============
 CARD.DOMAIN TYPE  MODE
-------------------------------
+=========== ===== ============
 06          CEX5A Accelerator
 06.0047     CEX5A Accelerator
 06.00ff     CEX5A Accelerator
+=========== ===== ============
 
 These are the steps:
 
@@ -492,25 +517,26 @@ These are the steps:
    * VFIO_MDEV_DEVICE
    * KVM
 
-   If using make menuconfig select the following to build the vfio_ap module:
-   -> Device Drivers
-      -> IOMMU Hardware Support
-         select S390 AP IOMMU Support
-      -> VFIO Non-Privileged userspace driver framework
-         -> Mediated device driver frramework
-            -> VFIO driver for Mediated devices
-   -> I/O subsystem
-      -> VFIO support for AP devices
+   If using make menuconfig select the following to build the vfio_ap module::
+
+     -> Device Drivers
+	-> IOMMU Hardware Support
+	   select S390 AP IOMMU Support
+	-> VFIO Non-Privileged userspace driver framework
+	   -> Mediated device driver frramework
+	      -> VFIO driver for Mediated devices
+     -> I/O subsystem
+	-> VFIO support for AP devices
 
 2. Secure the AP queues to be used by the three guests so that the host can not
    access them. To secure them, there are two sysfs files that specify
    bitmasks marking a subset of the APQN range as 'usable by the default AP
    queue device drivers' or 'not usable by the default device drivers' and thus
    available for use by the vfio_ap device driver'. The location of the sysfs
-   files containing the masks are:
+   files containing the masks are::
 
-   /sys/bus/ap/apmask
-   /sys/bus/ap/aqmask
+     /sys/bus/ap/apmask
+     /sys/bus/ap/aqmask
 
    The 'apmask' is a 256-bit mask that identifies a set of AP adapter IDs
    (APID). Each bit in the mask, from left to right (i.e., from most significant
@@ -526,7 +552,7 @@ These are the steps:
    queue device drivers; otherwise, the APQI is usable by the vfio_ap device
    driver.
 
-   Take, for example, the following mask:
+   Take, for example, the following mask::
 
       0x7dffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
 
@@ -548,68 +574,70 @@ These are the steps:
       respective sysfs mask file in one of two formats:
 
       * An absolute hex string starting with 0x - like "0x12345678" - sets
-        the mask. If the given string is shorter than the mask, it is padded
-        with 0s on the right; for example, specifying a mask value of 0x41 is
-        the same as specifying:
+	the mask. If the given string is shorter than the mask, it is padded
+	with 0s on the right; for example, specifying a mask value of 0x41 is
+	the same as specifying::
 
-           0x4100000000000000000000000000000000000000000000000000000000000000
+	   0x4100000000000000000000000000000000000000000000000000000000000000
 
-        Keep in mind that the mask reads from left to right (i.e., most
-        significant to least significant bit in big endian order), so the mask
-        above identifies device numbers 1 and 7 (01000001).
+	Keep in mind that the mask reads from left to right (i.e., most
+	significant to least significant bit in big endian order), so the mask
+	above identifies device numbers 1 and 7 (01000001).
 
-        If the string is longer than the mask, the operation is terminated with
-        an error (EINVAL).
+	If the string is longer than the mask, the operation is terminated with
+	an error (EINVAL).
 
       * Individual bits in the mask can be switched on and off by specifying
-        each bit number to be switched in a comma separated list. Each bit
-        number string must be prepended with a ('+') or minus ('-') to indicate
-        the corresponding bit is to be switched on ('+') or off ('-'). Some
-        valid values are:
+	each bit number to be switched in a comma separated list. Each bit
+	number string must be prepended with a ('+') or minus ('-') to indicate
+	the corresponding bit is to be switched on ('+') or off ('-'). Some
+	valid values are:
 
-           "+0"    switches bit 0 on
-           "-13"   switches bit 13 off
-           "+0x41" switches bit 65 on
-           "-0xff" switches bit 255 off
+	   - "+0"    switches bit 0 on
+	   - "-13"   switches bit 13 off
+	   - "+0x41" switches bit 65 on
+	   - "-0xff" switches bit 255 off
 
-           The following example:
-              +0,-6,+0x47,-0xf0
+	The following example:
 
-              Switches bits 0 and 71 (0x47) on
-              Switches bits 6 and 240 (0xf0) off
+	      +0,-6,+0x47,-0xf0
 
-        Note that the bits not specified in the list remain as they were before
-        the operation.
+	Switches bits 0 and 71 (0x47) on
+
+	Switches bits 6 and 240 (0xf0) off
+
+	Note that the bits not specified in the list remain as they were before
+	the operation.
 
    2. The masks can also be changed at boot time via parameters on the kernel
       command line like this:
 
-         ap.apmask=0xffff ap.aqmask=0x40
+	 ap.apmask=0xffff ap.aqmask=0x40
 
-         This would create the following masks:
+	 This would create the following masks::
 
-            apmask:
-            0xffff000000000000000000000000000000000000000000000000000000000000
+	    apmask:
+	    0xffff000000000000000000000000000000000000000000000000000000000000
 
-            aqmask:
-            0x4000000000000000000000000000000000000000000000000000000000000000
+	    aqmask:
+	    0x4000000000000000000000000000000000000000000000000000000000000000
 
-         Resulting in these two pools:
+	 Resulting in these two pools::
 
-            default drivers pool:    adapter 0-15, domain 1
-            alternate drivers pool:  adapter 16-255, domains 0, 2-255
+	    default drivers pool:    adapter 0-15, domain 1
+	    alternate drivers pool:  adapter 16-255, domains 0, 2-255
 
-   Securing the APQNs for our example:
-   ----------------------------------
+Securing the APQNs for our example
+----------------------------------
    To secure the AP queues 05.0004, 05.0047, 05.00ab, 05.00ff, 06.0004, 06.0047,
    06.00ab, and 06.00ff for use by the vfio_ap device driver, the corresponding
-   APQNs can either be removed from the default masks:
+   APQNs can either be removed from the default masks::
 
       echo -5,-6 > /sys/bus/ap/apmask
 
       echo -4,-0x47,-0xab,-0xff > /sys/bus/ap/aqmask
 
-   Or the masks can be set as follows:
+   Or the masks can be set as follows::
 
       echo 0xf9ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
       > apmask
@@ -620,19 +648,19 @@ These are the steps:
    This will result in AP queues 05.0004, 05.0047, 05.00ab, 05.00ff, 06.0004,
    06.0047, 06.00ab, and 06.00ff getting bound to the vfio_ap device driver. The
    sysfs directory for the vfio_ap device driver will now contain symbolic links
-   to the AP queue devices bound to it:
+   to the AP queue devices bound to it::
 
-   /sys/bus/ap
-   ... [drivers]
-   ...... [vfio_ap]
-   ......... [05.0004]
-   ......... [05.0047]
-   ......... [05.00ab]
-   ......... [05.00ff]
-   ......... [06.0004]
-   ......... [06.0047]
-   ......... [06.00ab]
-   ......... [06.00ff]
+     /sys/bus/ap
+     ... [drivers]
+     ...... [vfio_ap]
+     ......... [05.0004]
+     ......... [05.0047]
+     ......... [05.00ab]
+     ......... [05.00ff]
+     ......... [06.0004]
+     ......... [06.0047]
+     ......... [06.00ab]
+     ......... [06.00ff]
 
    Keep in mind that only type 10 and newer adapters (i.e., CEX4 and later)
    can be bound to the vfio_ap device driver. The reason for this is to
@@ -645,96 +673,96 @@ These are the steps:
    queue device can be read from the parent card's sysfs directory. For example,
    to see the hardware type of the queue 05.0004:
 
-   cat /sys/bus/ap/devices/card05/hwtype
+     cat /sys/bus/ap/devices/card05/hwtype
 
    The hwtype must be 10 or higher (CEX4 or newer) in order to be bound to the
    vfio_ap device driver.
 
 3. Create the mediated devices needed to configure the AP matrixes for the
    three guests and to provide an interface to the vfio_ap driver for
-   use by the guests:
+   use by the guests::
 
-   /sys/devices/vfio_ap/matrix/
-   --- [mdev_supported_types]
-   ------ [vfio_ap-passthrough] (passthrough mediated matrix device type)
-   --------- create
-   --------- [devices]
+     /sys/devices/vfio_ap/matrix/
+     --- [mdev_supported_types]
+     ------ [vfio_ap-passthrough] (passthrough mediated matrix device type)
+     --------- create
+     --------- [devices]
 
-   To create the mediated devices for the three guests:
+   To create the mediated devices for the three guests::
 
 	uuidgen > create
 	uuidgen > create
 	uuidgen > create
 
-        or
+	or
 
-        echo $uuid1 > create
-        echo $uuid2 > create
-        echo $uuid3 > create
+	echo $uuid1 > create
+	echo $uuid2 > create
+	echo $uuid3 > create
 
    This will create three mediated devices in the [devices] subdirectory named
    after the UUID written to the create attribute file. We call them $uuid1,
-   $uuid2 and $uuid3 and this is the sysfs directory structure after creation:
+   $uuid2 and $uuid3 and this is the sysfs directory structure after creation::
 
-   /sys/devices/vfio_ap/matrix/
-   --- [mdev_supported_types]
-   ------ [vfio_ap-passthrough]
-   --------- [devices]
-   ------------ [$uuid1]
-   --------------- assign_adapter
-   --------------- assign_control_domain
-   --------------- assign_domain
-   --------------- matrix
-   --------------- unassign_adapter
-   --------------- unassign_control_domain
-   --------------- unassign_domain
+     /sys/devices/vfio_ap/matrix/
+     --- [mdev_supported_types]
+     ------ [vfio_ap-passthrough]
+     --------- [devices]
+     ------------ [$uuid1]
+     --------------- assign_adapter
+     --------------- assign_control_domain
+     --------------- assign_domain
+     --------------- matrix
+     --------------- unassign_adapter
+     --------------- unassign_control_domain
+     --------------- unassign_domain
 
-   ------------ [$uuid2]
-   --------------- assign_adapter
-   --------------- assign_control_domain
-   --------------- assign_domain
-   --------------- matrix
-   --------------- unassign_adapter
-   ----------------unassign_control_domain
-   ----------------unassign_domain
+     ------------ [$uuid2]
+     --------------- assign_adapter
+     --------------- assign_control_domain
+     --------------- assign_domain
+     --------------- matrix
+     --------------- unassign_adapter
+     ----------------unassign_control_domain
+     ----------------unassign_domain
 
-   ------------ [$uuid3]
-   --------------- assign_adapter
-   --------------- assign_control_domain
-   --------------- assign_domain
-   --------------- matrix
-   --------------- unassign_adapter
-   ----------------unassign_control_domain
-   ----------------unassign_domain
+     ------------ [$uuid3]
+     --------------- assign_adapter
+     --------------- assign_control_domain
+     --------------- assign_domain
+     --------------- matrix
+     --------------- unassign_adapter
+     ----------------unassign_control_domain
+     ----------------unassign_domain
 
 4. The administrator now needs to configure the matrixes for the mediated
    devices $uuid1 (for Guest1), $uuid2 (for Guest2) and $uuid3 (for Guest3).
 
-   This is how the matrix is configured for Guest1:
+   This is how the matrix is configured for Guest1::
 
       echo 5 > assign_adapter
       echo 6 > assign_adapter
       echo 4 > assign_domain
       echo 0xab > assign_domain
 
-      Control domains can similarly be assigned using the assign_control_domain
-      sysfs file.
+   Control domains can similarly be assigned using the assign_control_domain
+   sysfs file.
 
-      If a mistake is made configuring an adapter, domain or control domain,
-      you can use the unassign_xxx files to unassign the adapter, domain or
-      control domain.
+   If a mistake is made configuring an adapter, domain or control domain,
+   you can use the unassign_xxx files to unassign the adapter, domain or
+   control domain.
 
-      To display the matrix configuration for Guest1:
+   To display the matrix configuration for Guest1::
 
-         cat matrix
+	 cat matrix
 
-   This is how the matrix is configured for Guest2:
+   This is how the matrix is configured for Guest2::
 
       echo 5 > assign_adapter
       echo 0x47 > assign_domain
       echo 0xff > assign_domain
 
-   This is how the matrix is configured for Guest3:
+   This is how the matrix is configured for Guest3::
 
       echo 6 > assign_adapter
       echo 0x47 > assign_domain
@@ -783,24 +811,24 @@ These are the steps:
    configured for the system. If a control domain number higher than the maximum
    is specified, the operation will terminate with an error (ENODEV).
 
-5. Start Guest1:
+5. Start Guest1::
 
-   /usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on \
-      -device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid1 ...
+     /usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on \
+	-device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid1 ...
 
-7. Start Guest2:
+7. Start Guest2::
 
-   /usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on \
-      -device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid2 ...
+     /usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on \
+	-device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid2 ...
 
-7. Start Guest3:
+7. Start Guest3::
 
-   /usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on \
-      -device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid3 ...
+     /usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on \
+	-device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid3 ...
 
 When the guest is shut down, the mediated matrix devices may be removed.
 
-Using our example again, to remove the mediated matrix device $uuid1:
+Using our example again, to remove the mediated matrix device $uuid1::
 
    /sys/devices/vfio_ap/matrix/
       --- [mdev_supported_types]
@@ -809,18 +837,19 @@ Using our example again, to remove the mediated matrix device $uuid1:
       ------------ [$uuid1]
       --------------- remove
 
+::
 
    echo 1 > remove
 
-   This will remove all of the mdev matrix device's sysfs structures including
-   the mdev device itself. To recreate and reconfigure the mdev matrix device,
-   all of the steps starting with step 3 will have to be performed again. Note
-   that the remove will fail if a guest using the mdev is still running.
+This will remove all of the mdev matrix device's sysfs structures including
+the mdev device itself. To recreate and reconfigure the mdev matrix device,
+all of the steps starting with step 3 will have to be performed again. Note
+that the remove will fail if a guest using the mdev is still running.
 
-   It is not necessary to remove an mdev matrix device, but one may want to
-   remove it if no guest will use it during the remaining lifetime of the linux
-   host. If the mdev matrix device is removed, one may want to also reconfigure
-   the pool of adapters and queues reserved for use by the default drivers.
+It is not necessary to remove an mdev matrix device, but one may want to
+remove it if no guest will use it during the remaining lifetime of the linux
+host. If the mdev matrix device is removed, one may want to also reconfigure
+the pool of adapters and queues reserved for use by the default drivers.
 
 Limitations
 ===========
diff --git a/Documentation/s390/vfio-ccw.txt b/Documentation/s390/vfio-ccw.rst
similarity index 89%
rename from Documentation/s390/vfio-ccw.txt
rename to Documentation/s390/vfio-ccw.rst
index 2be11ad864ff..1f6d0b56d53e 100644
--- a/Documentation/s390/vfio-ccw.txt
+++ b/Documentation/s390/vfio-ccw.rst
@@ -1,3 +1,4 @@
+==================================
 vfio-ccw: the basic infrastructure
 ==================================
 
@@ -11,9 +12,11 @@ virtual machine, while vfio is the means.
 Different than other hardware architectures, s390 has defined a unified
 I/O access method, which is so called Channel I/O. It has its own access
 patterns:
+
 - Channel programs run asynchronously on a separate (co)processor.
 - The channel subsystem will access any memory designated by the caller
   in the channel program directly, i.e. there is no iommu involved.
+
 Thus when we introduce vfio support for these devices, we realize it
 with a mediated device (mdev) implementation. The vfio mdev will be
 added to an iommu group, so as to make itself able to be managed by the
@@ -24,6 +27,7 @@ to perform I/O instructions.
 
 This document does not intend to explain the s390 I/O architecture in
 every detail. More information/reference could be found here:
+
 - A good start to know Channel I/O in general:
   https://en.wikipedia.org/wiki/Channel_I/O
 - s390 architecture:
@@ -80,6 +84,7 @@ until interrupted. The I/O completion result is received by the
 interrupt handler in the form of interrupt response block (IRB).
 
 Back to vfio-ccw, in short:
+
 - ORBs and channel programs are built in guest kernel (with guest
   physical addresses).
 - ORBs and channel programs are passed to the host kernel.
@@ -106,6 +111,7 @@ it gets sent to hardware.
 
 Within this implementation, we have two drivers for two types of
 devices:
+
 - The vfio_ccw driver for the physical subchannel device.
   This is an I/O subchannel driver for the real subchannel device.  It
   realizes a group of callbacks and registers to the mdev framework as a
@@ -137,7 +143,7 @@ devices:
   vfio_pin_pages and a vfio_unpin_pages interfaces from the vfio iommu
   backend for the physical devices to pin and unpin pages by demand.
 
-Below is a high Level block diagram.
+Below is a high Level block diagram::
 
  +-------------+
  |             |
@@ -158,6 +164,7 @@ Below is a high Level block diagram.
  +-------------+
 
 The process of how these work together.
+
 1. vfio_ccw.ko drives the physical I/O subchannel, and registers the
    physical device (with callbacks) to mdev framework.
    When vfio_ccw probing the subchannel device, it registers device
@@ -178,17 +185,17 @@ vfio-ccw I/O region
 
 An I/O region is used to accept channel program request from user
 space and store I/O interrupt result for user space to retrieve. The
-definition of the region is:
+definition of the region is::
 
-struct ccw_io_region {
-#define ORB_AREA_SIZE 12
-	__u8	orb_area[ORB_AREA_SIZE];
-#define SCSW_AREA_SIZE 12
-	__u8	scsw_area[SCSW_AREA_SIZE];
-#define IRB_AREA_SIZE 96
-	__u8	irb_area[IRB_AREA_SIZE];
-	__u32	ret_code;
-} __packed;
+  struct ccw_io_region {
+  #define ORB_AREA_SIZE 12
+	  __u8    orb_area[ORB_AREA_SIZE];
+  #define SCSW_AREA_SIZE 12
+	  __u8    scsw_area[SCSW_AREA_SIZE];
+  #define IRB_AREA_SIZE 96
+	  __u8    irb_area[IRB_AREA_SIZE];
+	  __u32   ret_code;
+  } __packed;
 
 While starting an I/O request, orb_area should be filled with the
 guest ORB, and scsw_area should be filled with the SCSW of the Virtual
@@ -205,7 +212,7 @@ vfio-ccw follows what vfio-pci did on the s390 platform and uses
 vfio-iommu-type1 as the vfio iommu backend.
 
 * CCW translation APIs
-  A group of APIs (start with 'cp_') to do CCW translation. The CCWs
+  A group of APIs (start with `cp_`) to do CCW translation. The CCWs
   passed in by a user space program are organized with their guest
   physical memory addresses. These APIs will copy the CCWs into kernel
   space, and assemble a runnable kernel channel program by updating the
@@ -217,12 +224,14 @@ vfio-iommu-type1 as the vfio iommu backend.
   This driver utilizes the CCW translation APIs and introduces
   vfio_ccw, which is the driver for the I/O subchannel devices you want
   to pass through.
-  vfio_ccw implements the following vfio ioctls:
+  vfio_ccw implements the following vfio ioctls::
+
     VFIO_DEVICE_GET_INFO
     VFIO_DEVICE_GET_IRQ_INFO
     VFIO_DEVICE_GET_REGION_INFO
     VFIO_DEVICE_RESET
     VFIO_DEVICE_SET_IRQS
+
   This provides an I/O region, so that the user space program can pass a
   channel program to the kernel, to do further CCW translation before
   issuing them to a real device.
@@ -236,32 +245,49 @@ bit more detail how an I/O request triggered by the QEMU guest will be
 handled (without error handling).
 
 Explanation:
-Q1-Q7: QEMU side process.
-K1-K5: Kernel side process.
 
-Q1. Get I/O region info during initialization.
-Q2. Setup event notifier and handler to handle I/O completion.
+- Q1-Q7: QEMU side process.
+- K1-K5: Kernel side process.
+
+Q1.
+    Get I/O region info during initialization.
+
+Q2.
+    Setup event notifier and handler to handle I/O completion.
 
 ... ...
 
-Q3. Intercept a ssch instruction.
-Q4. Write the guest channel program and ORB to the I/O region.
-    K1. Copy from guest to kernel.
-    K2. Translate the guest channel program to a host kernel space
-        channel program, which becomes runnable for a real device.
-    K3. With the necessary information contained in the orb passed in
-        by QEMU, issue the ccwchain to the device.
-    K4. Return the ssch CC code.
-Q5. Return the CC code to the guest.
+Q3.
+    Intercept a ssch instruction.
+Q4.
+    Write the guest channel program and ORB to the I/O region.
+
+    K1.
+	Copy from guest to kernel.
+    K2.
+	Translate the guest channel program to a host kernel space
+	channel program, which becomes runnable for a real device.
+    K3.
+	With the necessary information contained in the orb passed in
+	by QEMU, issue the ccwchain to the device.
+    K4.
+	Return the ssch CC code.
+Q5.
+    Return the CC code to the guest.
 
 ... ...
 
-    K5. Interrupt handler gets the I/O result and write the result to
-        the I/O region.
-    K6. Signal QEMU to retrieve the result.
-Q6. Get the signal and event handler reads out the result from the I/O
+    K5.
+	Interrupt handler gets the I/O result and write the result to
+	the I/O region.
+    K6.
+	Signal QEMU to retrieve the result.
+
+Q6.
+    Get the signal and event handler reads out the result from the I/O
     region.
-Q7. Update the irb for the guest.
+Q7.
+    Update the irb for the guest.
 
 Limitations
 -----------
@@ -295,6 +321,6 @@ Reference
 1. ESA/s390 Principles of Operation manual (IBM Form. No. SA22-7832)
 2. ESA/390 Common I/O Device Commands manual (IBM Form. No. SA22-7204)
 3. https://en.wikipedia.org/wiki/Channel_I/O
-4. Documentation/s390/cds.txt
+4. Documentation/s390/cds.rst
 5. Documentation/vfio.txt
 6. Documentation/vfio-mediated-device.txt
diff --git a/Documentation/s390/zfcpdump.txt b/Documentation/s390/zfcpdump.rst
similarity index 97%
rename from Documentation/s390/zfcpdump.txt
rename to Documentation/s390/zfcpdump.rst
index b064aa59714d..54e8e7caf7e7 100644
--- a/Documentation/s390/zfcpdump.txt
+++ b/Documentation/s390/zfcpdump.rst
@@ -1,4 +1,6 @@
+==================================
 The s390 SCSI dump tool (zfcpdump)
+==================================
 
 System z machines (z900 or higher) provide hardware support for creating system
 dumps on SCSI disks. The dump process is initiated by booting a dump tool, which
diff --git a/MAINTAINERS b/MAINTAINERS
index e4c26dc67668..8c0cb2aa4c00 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13577,7 +13577,7 @@ L:	linux-s390@vger.kernel.org
 L:	kvm@vger.kernel.org
 S:	Supported
 F:	drivers/s390/cio/vfio_ccw*
-F:	Documentation/s390/vfio-ccw.txt
+F:	Documentation/s390/vfio-ccw.rst
 F:	include/uapi/linux/vfio_ccw.h
 
 S390 ZCRYPT DRIVER
@@ -13597,7 +13597,7 @@ S:	Supported
 F:	drivers/s390/crypto/vfio_ap_drv.c
 F:	drivers/s390/crypto/vfio_ap_private.h
 F:	drivers/s390/crypto/vfio_ap_ops.c
-F:	Documentation/s390/vfio-ap.txt
+F:	Documentation/s390/vfio-ap.rst
 
 S390 ZFCP DRIVER
 M:	Steffen Maier <maier@linux.ibm.com>
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 1391d2a390e3..c72c2514d3a2 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -795,9 +795,9 @@ config CRASH_DUMP
 	  Crash dump kernels are loaded in the main kernel with kexec-tools
 	  into a specially reserved region and then later executed after
 	  a crash by kdump/kexec.
-	  Refer to <file:Documentation/s390/zfcpdump.txt> for more details on this.
+	  Refer to <file:Documentation/s390/zfcpdump.rst> for more details on this.
 	  This option also enables s390 zfcpdump.
-	  See also <file:Documentation/s390/zfcpdump.txt>
+	  See also <file:Documentation/s390/zfcpdump.rst>
 
 endmenu
 
diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h
index c305d39f5016..b94783f71322 100644
--- a/arch/s390/include/asm/debug.h
+++ b/arch/s390/include/asm/debug.h
@@ -152,7 +152,7 @@ static inline debug_entry_t *debug_text_event(debug_info_t *id, int level,
 
 /*
  * IMPORTANT: Use "%s" in sprintf format strings with care! Only pointers are
- * stored in the s390dbf. See Documentation/s390/s390dbf.txt for more details!
+ * stored in the s390dbf. See Documentation/s390/s390dbf.rst for more details!
  */
 extern debug_entry_t *
 __debug_sprintf_event(debug_info_t *id, int level, char *string, ...)
@@ -210,7 +210,7 @@ static inline debug_entry_t *debug_text_exception(debug_info_t *id, int level,
 
 /*
  * IMPORTANT: Use "%s" in sprintf format strings with care! Only pointers are
- * stored in the s390dbf. See Documentation/s390/s390dbf.txt for more details!
+ * stored in the s390dbf. See Documentation/s390/s390dbf.rst for more details!
  */
 extern debug_entry_t *
 __debug_sprintf_exception(debug_info_t *id, int level, char *string, ...)
diff --git a/drivers/s390/char/zcore.c b/drivers/s390/char/zcore.c
index 76d3c50bf078..e7ba39d156e7 100644
--- a/drivers/s390/char/zcore.c
+++ b/drivers/s390/char/zcore.c
@@ -4,7 +4,7 @@
  * dumps on SCSI disks (zfcpdump). The "zcore/mem" debugfs file shows the same
  * dump format as s390 standalone dumps.
  *
- * For more information please refer to Documentation/s390/zfcpdump.txt
+ * For more information please refer to Documentation/s390/zfcpdump.rst
  *
  * Copyright IBM Corp. 2003, 2008
  * Author(s): Michael Holzheu
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 32/79] s390: include/asm/debug.h add kerneldoc markups
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (29 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 31/79] docs: s390: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 33/79] docs: serial: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
                     ` (46 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Martin Schwidefsky, Heiko Carstens, linux-s390

Instead of keeping the documentation inside s390dbf.rst,
move them to arch/s390/include/asm/debug.h, using standard
kernel-doc markups.

Keeping the documentation close to the code helps to keep it
updated. It also makes easier to document other stuff inside
debug.h, as all it needs is to add kernel-doc markups inside
it, as the file will be already be included at the produced
documentation.

-

Those were converted to kerneldoc using this script specially
designed to parse ths file, and manually editted:

<script>
use strict;

my $mode = "";
my $parameter = "";
my $ret = "";
my $descr = "";

sub add_var($)
{
	my $ln = shift;

	$ln =~ s/^\s+//;
	$ln =~ s/\s+$//;

	return if ($ln eq "");

	$ln =~ s/^(\S+)\s+/$1\t/;

	print " * \@$ln\n";
}

sub add_return($)
{
	my $ln = shift;

	print " *\n * Return:\n" if ($mode ne "Return Value:");

	$ln =~ s/^\s+//;
	$ln =~ s/\s+$//;

	return if ($ln eq "");

	print " * -   $ln\n";
}

sub add_description($)
{
	my $ln = shift;

	print " *\n * \n" if ($mode ne "Description:");

	$ln =~ s/^\s+//;
	$ln =~ s/\s+$//;

	return if ($ln eq "");

	print " * $ln\n";
}

sub flush_results()
{
	print " */\n\n";
}

while (<>) {
	if (m/^[\-]+$/) {
		flush_results();
		$mode = "";
		$parameter = "";
		$ret = "";
		$descr = "";
		next;
	}
	if (m/(Parameter:)(.*)/) {
		print " *\n" if ($mode eq "func");
		add_var($2);
		$mode = $1;
		next;
	}
	if (m/(Return Value:)(.*)/) {
		add_return($2);
		$mode = $1;
		next;
	}
	if (m/(Description:)(.*)/) {
		add_description($2);
		$mode = $1;
		next;
	}
	if ($mode eq "Parameter:") {
		add_var($_);
		next;
	}
	if ($mode eq "Return Value:") {
		add_return($_);
		next;
	}
	if ($mode eq "Description:") {
		add_description($_);
		next;
	}
	next if (m/^\s*$/);

	if (m/^\S+.*\s\*?(\S+)\s*\(/) {
		if ($mode eq "") {
			print "/**\n * $1()\n";
		} else {
			print " * $1()\n";
		}
		$mode="func";
	}
}
flush_results();
</script>

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/s390/s390dbf.rst | 672 +--------------------------------
 arch/s390/include/asm/debug.h  | 231 ++++++++++++
 2 files changed, 232 insertions(+), 671 deletions(-)

diff --git a/Documentation/s390/s390dbf.rst b/Documentation/s390/s390dbf.rst
index ec2a1faa414b..d2595b548879 100644
--- a/Documentation/s390/s390dbf.rst
+++ b/Documentation/s390/s390dbf.rst
@@ -104,684 +104,14 @@ the "debug_stoppable" sysctl. If you set "debug_stoppable" to 0 the debug
 feature cannot be stopped. If the debug feature is already stopped, it
 will stay deactivated.
 
-----------------------------------------------------------------------------
-
 Kernel Interfaces:
 ------------------
 
-::
-
-  debug_info_t *debug_register(char *name, int pages, int nr_areas,
-			       int buf_size);
-
-Parameter:
-	      name:
-			   Name of debug log (e.g. used for debugfs entry)
-	      pages:
-			   Number of pages, which will be allocated per area
-	      nr_areas:
-			   Number of debug areas
-	      buf_size:
-			   Size of data area in each debug entry
-
-Return Value:
-	Handle for generated debug area
-
-	  NULL if register failed
-
-Description:  Allocates memory for a debug log
-	      Must not be called within an interrupt handler
-
-----------------------------------------------------------------------------
-
-::
-
-  debug_info_t *debug_register_mode(char *name, int pages, int nr_areas,
-				    int buf_size, mode_t mode, uid_t uid,
-				    gid_t gid);
-
-Parameter:
-	      name:
-			   Name of debug log (e.g. used for debugfs entry)
-	      pages:
-			   Number of pages, which will be allocated per area
-	      nr_areas:
-			   Number of debug areas
-	      buf_size:
-			   Size of data area in each debug entry
-	      mode:
-			   File mode for debugfs files. E.g. S_IRWXUGO
-	      uid:
-			   User ID for debugfs files. Currently only 0 is
-			   supported.
-	      gid:
-			   Group ID for debugfs files. Currently only 0 is
-			   supported.
-
-Return Value:
-	      Handle for generated debug area
-
-		NULL if register failed
-
-Description:
-	      Allocates memory for a debug log
-	      Must not be called within an interrupt handler
-
----------------------------------------------------------------------------
-
-::
-
-  void debug_unregister (debug_info_t * id);
-
-Parameter:
-	       id:
-		    handle for debug log
-
-Return Value:
-	       none
-
-Description:
-	       frees memory for a debug log and removes all registered debug
-	       views.
-
-	       Must not be called within an interrupt handler
-
----------------------------------------------------------------------------
-
-::
-
-  void debug_set_level (debug_info_t * id, int new_level);
-
-Parameter:     id:        handle for debug log
-	       new_level: new debug level
-
-Return Value:
-	       none
-
-Description:
-	       Sets new actual debug level if new_level is valid.
-
----------------------------------------------------------------------------
-
-::
-
-  bool debug_level_enabled (debug_info_t * id, int level);
-
-Parameter:
-	      id:
-			  handle for debug log
-	      level:
-			  debug level
-
-Return Value:
-	      True if level is less or equal to the current debug level.
-
-Description:
-	      Returns true if debug events for the specified level would be
-	      logged. Otherwise returns false.
-
----------------------------------------------------------------------------
-
-::
-
-  void debug_stop_all(void);
-
-Parameter:
-	       none
-
-Return Value:
-	       none
-
-Description:
-	       stops the debug feature if stopping is allowed. Currently
-	       used in case of a kernel oops.
-
----------------------------------------------------------------------------
-
-::
-
-  debug_entry_t* debug_event (debug_info_t* id, int level, void* data,
-			      int length);
-
-Parameter:
-	       id:
-		       handle for debug log
-	       level:
-		       debug level
-	       data:
-		       pointer to data for debug entry
-	       length:
-		       length of data in bytes
-
-Return Value:
-	       Address of written debug entry
-
-Description:
-	       writes debug entry to active debug area (if level <= actual
-	       debug level)
-
----------------------------------------------------------------------------
-
-::
-
-  debug_entry_t* debug_int_event (debug_info_t * id, int level,
-				  unsigned int data);
-  debug_entry_t* debug_long_event(debug_info_t * id, int level,
-				  unsigned long data);
-
-Parameter:
-	       id:
-		       handle for debug log
-	       level:
-		       debug level
-	       data:
-		       integer value for debug entry
-
-Return Value:
-	       Address of written debug entry
-
-Description:
-	       writes debug entry to active debug area (if level <= actual
-	       debug level)
-
----------------------------------------------------------------------------
-
-::
-
-  debug_entry_t* debug_text_event (debug_info_t * id, int level,
-				   const char* data);
-
-Parameter:
-	       id:
-		       handle for debug log
-	       level:
-		       debug level
-	       data:
-		       string for debug entry
-
-Return Value:
-	       Address of written debug entry
-
-Description:
-	       writes debug entry in ascii format to active debug area
-	       (if level <= actual debug level)
-
----------------------------------------------------------------------------
-
-::
-
-  debug_entry_t* debug_sprintf_event (debug_info_t * id, int level,
-				      char* string,...);
-
-Parameter:
-	       id:
-		      handle for debug log
-	       level:
-		      debug level
-	       string:
-		      format string for debug entry
-	       ...:
-		      varargs used as in sprintf()
-
-Return Value:  Address of written debug entry
-
-Description:
-	       writes debug entry with format string and varargs (longs) to
-	       active debug area (if level $<=$ actual debug level).
-	       floats and long long datatypes cannot be used as varargs.
-
----------------------------------------------------------------------------
-
-::
-
-  debug_entry_t* debug_exception (debug_info_t* id, int level, void* data,
-				  int length);
-
-Parameter:
-	       id:
-		       handle for debug log
-	       level:
-		       debug level
-	       data:
-		       pointer to data for debug entry
-	       length:
-		       length of data in bytes
-
-Return Value:
-	       Address of written debug entry
-
-Description:
-	       writes debug entry to active debug area (if level <= actual
-	       debug level) and switches to next debug area
-
----------------------------------------------------------------------------
-
-::
-
-  debug_entry_t* debug_int_exception (debug_info_t * id, int level,
-				      unsigned int data);
-  debug_entry_t* debug_long_exception(debug_info_t * id, int level,
-				      unsigned long data);
-
-Parameter:     id:     handle for debug log
-	       level:  debug level
-	       data:   integer value for debug entry
-
-Return Value:  Address of written debug entry
-
-Description:   writes debug entry to active debug area (if level <= actual
-	       debug level) and switches to next debug area
-
----------------------------------------------------------------------------
-
-::
-
-  debug_entry_t* debug_text_exception (debug_info_t * id, int level,
-				       const char* data);
-
-Parameter:     id:     handle for debug log
-	       level:  debug level
-	       data:   string for debug entry
-
-Return Value:  Address of written debug entry
-
-Description:   writes debug entry in ascii format to active debug area
-	       (if level <= actual debug level) and switches to next debug
-	       area
-
----------------------------------------------------------------------------
-
-::
-
-  debug_entry_t* debug_sprintf_exception (debug_info_t * id, int level,
-					  char* string,...);
-
-Parameter:     id:    handle for debug log
-	       level: debug level
-	       string: format string for debug entry
-	       ...: varargs used as in sprintf()
-
-Return Value:  Address of written debug entry
-
-Description:   writes debug entry with format string and varargs (longs) to
-	       active debug area (if level $<=$ actual debug level) and
-	       switches to next debug area.
-	       floats and long long datatypes cannot be used as varargs.
-
----------------------------------------------------------------------------
-
-::
-
-  int debug_register_view (debug_info_t * id, struct debug_view *view);
-
-Parameter:     id:    handle for debug log
-	       view:  pointer to debug view struct
-
-Return Value:  0  : ok
-	       < 0: Error
-
-Description:   registers new debug view and creates debugfs dir entry
-
----------------------------------------------------------------------------
-
-::
-
-  int debug_unregister_view (debug_info_t * id, struct debug_view *view);
-
-Parameter:     id:    handle for debug log
-	       view:  pointer to debug view struct
-
-Return Value:  0  : ok
-	       < 0: Error
-
-Description:   unregisters debug view and removes debugfs dir entry
-
-
+.. kernel-doc:: arch/s390/include/asm/debug.h
 
 Predefined views:
 -----------------
 
-extern struct debug_view debug_hex_ascii_view;
-
-extern struct debug_view debug_raw_view;
-
-extern struct debug_view debug_sprintf_view;
-
-Examples
---------
-
-::
-
-  /*
-   * hex_ascii- + raw-view Example
-   */
-
-  #include <linux/init.h>
-  #include <asm/debug.h>
-
-  static debug_info_t* debug_info;
-
-  static int init(void)
-  {
-      /* register 4 debug areas with one page each and 4 byte data field */
-
-      debug_info = debug_register ("test", 1, 4, 4 );
-      debug_register_view(debug_info,&debug_hex_ascii_view);
-      debug_register_view(debug_info,&debug_raw_view);
-
-      debug_text_event(debug_info, 4 , "one ");
-      debug_int_exception(debug_info, 4, 4711);
-      debug_event(debug_info, 3, &debug_info, 4);
-
-      return 0;
-  }
-
-  static void cleanup(void)
-  {
-      debug_unregister (debug_info);
-  }
-
-  module_init(init);
-  module_exit(cleanup);
-
----------------------------------------------------------------------------
-
-::
-
-  /*
-   * sprintf-view Example
-   */
-
-  #include <linux/init.h>
-  #include <asm/debug.h>
-
-  static debug_info_t* debug_info;
-
-  static int init(void)
-  {
-      /* register 4 debug areas with one page each and data field for */
-      /* format string pointer + 2 varargs (= 3 * sizeof(long))       */
-
-      debug_info = debug_register ("test", 1, 4, sizeof(long) * 3);
-      debug_register_view(debug_info,&debug_sprintf_view);
-
-      debug_sprintf_event(debug_info, 2 , "first event in %s:%i\n",__FILE__,__LINE__);
-      debug_sprintf_exception(debug_info, 1, "pointer to debug info: %p\n",&debug_info);
-
-      return 0;
-  }
-
-  static void cleanup(void)
-  {
-      debug_unregister (debug_info);
-  }
-
-  module_init(init);
-  module_exit(cleanup);
-
-Debugfs Interface
------------------
-Views to the debug logs can be investigated through reading the corresponding
-debugfs-files:
-
-Example::
-
-  > ls /sys/kernel/debug/s390dbf/dasd
-  flush  hex_ascii  level pages raw
-  > cat /sys/kernel/debug/s390dbf/dasd/hex_ascii | sort -k2,2 -s
-  00 00974733272:680099 2 - 02 0006ad7e  07 ea 4a 90 | ....
-  00 00974733272:682210 2 - 02 0006ade6  46 52 45 45 | FREE
-  00 00974733272:682213 2 - 02 0006adf6  07 ea 4a 90 | ....
-  00 00974733272:682281 1 * 02 0006ab08  41 4c 4c 43 | EXCP
-  01 00974733272:682284 2 - 02 0006ab16  45 43 4b 44 | ECKD
-  01 00974733272:682287 2 - 02 0006ab28  00 00 00 04 | ....
-  01 00974733272:682289 2 - 02 0006ab3e  00 00 00 20 | ...
-  01 00974733272:682297 2 - 02 0006ad7e  07 ea 4a 90 | ....
-  01 00974733272:684384 2 - 00 0006ade6  46 52 45 45 | FREE
-  01 00974733272:684388 2 - 00 0006adf6  07 ea 4a 90 | ....
-
-See section about predefined views for explanation of the above output!
-
-Changing the debug level
-------------------------
-
-Example::
-
-
-  > cat /sys/kernel/debug/s390dbf/dasd/level
-  3
-  > echo "5" > /sys/kernel/debug/s390dbf/dasd/level
-  > cat /sys/kernel/debug/s390dbf/dasd/level
-  5
-
-Flushing debug areas
---------------------
-Debug areas can be flushed with piping the number of the desired
-area (0...n) to the debugfs file "flush". When using "-" all debug areas
-are flushed.
-
-Examples:
-
-1. Flush debug area 0::
-
-     > echo "0" > /sys/kernel/debug/s390dbf/dasd/flush
-
-2. Flush all debug areas::
-
-     > echo "-" > /sys/kernel/debug/s390dbf/dasd/flush
-
-Changing the size of debug areas
-------------------------------------
-It is possible the change the size of debug areas through piping
-the number of pages to the debugfs file "pages". The resize request will
-also flush the debug areas.
-
-Example:
-
-Define 4 pages for the debug areas of debug feature "dasd"::
-
-  > echo "4" > /sys/kernel/debug/s390dbf/dasd/pages
-
-Stooping the debug feature
---------------------------
-Example:
-
-1. Check if stopping is allowed::
-
-     > cat /proc/sys/s390dbf/debug_stoppable
-
-2. Stop debug feature::
-
-     > echo 0 > /proc/sys/s390dbf/debug_active
-
-lcrash Interface
-----------------
-It is planned that the dump analysis tool lcrash gets an additional command
-'s390dbf' to display all the debug logs. With this tool it will be possible
-to investigate the debug logs on a live system and with a memory dump after
-a system crash.
-
-Investigating raw memory
-------------------------
-One last possibility to investigate the debug logs at a live
-system and after a system crash is to look at the raw memory
-under VM or at the Service Element.
-It is possible to find the anker of the debug-logs through
-the 'debug_area_first' symbol in the System map. Then one has
-to follow the correct pointers of the data-structures defined
-in debug.h and find the debug-areas in memory.
-Normally modules which use the debug feature will also have
-a global variable with the pointer to the debug-logs. Following
-this pointer it will also be possible to find the debug logs in
-memory.
-
-For this method it is recommended to use '16 * x + 4' byte (x = 0..n)
-for the length of the data field in debug_register() in
-order to see the debug entries well formatted.
-
-
-Predefined Views
-----------------
-
-There are three predefined views: hex_ascii, raw and sprintf.
-The hex_ascii view shows the data field in hex and ascii representation
-(e.g. '45 43 4b 44 | ECKD').
-The raw view returns a bytestream as the debug areas are stored in memory.
-
-The sprintf view formats the debug entries in the same way as the sprintf
-function would do. The sprintf event/exception functions write to the
-debug entry a pointer to the format string (size = sizeof(long))
-and for each vararg a long value. So e.g. for a debug entry with a format
-string plus two varargs one would need to allocate a (3 * sizeof(long))
-byte data area in the debug_register() function.
-
-IMPORTANT:
-  Using "%s" in sprintf event functions is dangerous. You can only
-  use "%s" in the sprintf event functions, if the memory for the passed string
-  is available as long as the debug feature exists. The reason behind this is
-  that due to performance considerations only a pointer to the string is stored
-  in  the debug feature. If you log a string that is freed afterwards, you will
-  get an OOPS when inspecting the debug feature, because then the debug feature
-  will access the already freed memory.
-
-NOTE:
-  If using the sprintf view do NOT use other event/exception functions
-  than the sprintf-event and -exception functions.
-
-The format of the hex_ascii and sprintf view is as follows:
-
-- Number of area
-- Timestamp (formatted as seconds and microseconds since 00:00:00 Coordinated
-  Universal Time (UTC), January 1, 1970)
-- level of debug entry
-- Exception flag (* = Exception)
-- Cpu-Number of calling task
-- Return Address to caller
-- data field
-
-The format of the raw view is:
-
-- Header as described in debug.h
-- datafield
-
-A typical line of the hex_ascii view will look like the following (first line
-is only for explanation and will not be displayed when 'cating' the view):
-
-area  time           level exception cpu caller    data (hex + ascii)
---------------------------------------------------------------------------
-00    00964419409:440690 1 -         00  88023fe
-
-
-Defining views
---------------
-
-Views are specified with the 'debug_view' structure. There are defined
-callback functions which are used for reading and writing the debugfs files::
-
-  struct debug_view {
-	char name[DEBUG_MAX_PROCF_LEN];
-	debug_prolog_proc_t* prolog_proc;
-	debug_header_proc_t* header_proc;
-	debug_format_proc_t* format_proc;
-	debug_input_proc_t*  input_proc;
-	void*                private_data;
-  };
-
-where::
-
-  typedef int (debug_header_proc_t) (debug_info_t* id,
-				     struct debug_view* view,
-				     int area,
-				     debug_entry_t* entry,
-				     char* out_buf);
-
-  typedef int (debug_format_proc_t) (debug_info_t* id,
-				     struct debug_view* view, char* out_buf,
-				     const char* in_buf);
-  typedef int (debug_prolog_proc_t) (debug_info_t* id,
-				     struct debug_view* view,
-				     char* out_buf);
-  typedef int (debug_input_proc_t) (debug_info_t* id,
-				    struct debug_view* view,
-				    struct file* file, const char* user_buf,
-				    size_t in_buf_size, loff_t* offset);
-
-
-The "private_data" member can be used as pointer to view specific data.
-It is not used by the debug feature itself.
-
-The output when reading a debugfs file is structured like this::
-
-  "prolog_proc output"
-
-  "header_proc output 1"  "format_proc output 1"
-  "header_proc output 2"  "format_proc output 2"
-  "header_proc output 3"  "format_proc output 3"
-  ...
-
-When a view is read from the debugfs, the Debug Feature calls the
-'prolog_proc' once for writing the prolog.
-Then 'header_proc' and 'format_proc' are called for each
-existing debug entry.
-
-The input_proc can be used to implement functionality when it is written to
-the view (e.g. like with 'echo "0" > /sys/kernel/debug/s390dbf/dasd/level).
-
-For header_proc there can be used the default function
-debug_dflt_header_fn() which is defined in debug.h.
-and which produces the same header output as the predefined views.
-E.g::
-
-  00 00964419409:440761 2 - 00 88023ec
-
-In order to see how to use the callback functions check the implementation
-of the default views!
-
-Example::
-
-  #include <asm/debug.h>
-
-  #define UNKNOWNSTR "data: %08x"
-
-  const char* messages[] =
-  {"This error...........\n",
-   "That error...........\n",
-   "Problem..............\n",
-   "Something went wrong.\n",
-   "Everything ok........\n",
-   NULL
-  };
-
-  static int debug_test_format_fn(
-     debug_info_t * id, struct debug_view *view,
-     char *out_buf, const char *in_buf
-  )
-  {
-    int i, rc = 0;
-
-    if(id->buf_size >= 4) {
-       int msg_nr = *((int*)in_buf);
-       if(msg_nr < sizeof(messages)/sizeof(char*) - 1)
-	  rc += sprintf(out_buf, "%s", messages[msg_nr]);
-       else
-	  rc += sprintf(out_buf, UNKNOWNSTR, msg_nr);
-    }
-   out:
-     return rc;
-  }
-
-  struct debug_view debug_test_view = {
-    "myview",                 /* name of view */
-    NULL,                     /* no prolog */
-    &debug_dflt_header_fn,    /* default header for each entry */
-    &debug_test_format_fn,    /* our own format function */
-    NULL,                     /* no input function */
-    NULL                      /* no private data */
-  };
-
-test:
-=====
-
 ::
 
   debug_info_t *debug_info;
diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h
index b94783f71322..b55486f70deb 100644
--- a/arch/s390/include/asm/debug.h
+++ b/arch/s390/include/asm/debug.h
@@ -95,25 +95,106 @@ debug_entry_t *debug_exception_common(debug_info_t *id, int level,
 
 /* Debug Feature API: */
 
+/**
+ * debug_register() - allocates memory for a debug log.
+ *
+ * @name:        Name of debug log (e.g. used for debugfs entry)
+ * @pages:       Number of pages, which will be allocated per area
+ * @nr_areas:    Number of debug areas
+ * @buf_size:    Size of data area in each debug entry
+ *
+ * Return:
+ * - Handler for generated debug area
+ * - %NULL if register failed
+ *
+ * Must not be called within an interrupt handler.
+ */
 debug_info_t *debug_register(const char *name, int pages, int nr_areas,
 			     int buf_size);
 
+/**
+ * debug_register_mode() - allocates memory for a debug log.
+ *
+ * @name:	Name of debug log (e.g. used for debugfs entry)
+ * @pages:	Number of pages, which will be allocated per area
+ * @nr_areas:	Number of debug areas
+ * @buf_size:	Size of data area in each debug entry
+ * @mode:	File mode for debugfs files. E.g. S_IRWXUGO
+ * @uid:	User ID for debugfs files. Currently only 0 is supported.
+ * @gid:	Group ID for debugfs files. Currently only 0 is supported.
+ *
+ * Return:
+ * - Handler for generated debug area
+ * - %NULL if register failed
+ *
+ * Must not be called within an interrupt handler
+ */
 debug_info_t *debug_register_mode(const char *name, int pages, int nr_areas,
 				  int buf_size, umode_t mode, uid_t uid,
 				  gid_t gid);
 
+/**
+ * debug_unregister() - frees memory for a debug log and removes all
+ *			registered debug
+ * views.
+ *
+ * @id:		handle for debug log
+ *
+ * Return:
+ *    none
+ *
+ * Must not be called within an interrupt handler
+ */
 void debug_unregister(debug_info_t *id);
 
+/**
+ * debug_set_level() -  Sets new actual debug level if new_level is valid.
+ *
+ * @id:		handle for debug log
+ * @new_level:	new debug level
+ *
+ * Return:
+ *    none
+ */
 void debug_set_level(debug_info_t *id, int new_level);
 
 void debug_set_critical(void);
+
+/**
+ * debug_stop_all() - stops the debug feature if stopping is allowed.
+ *
+ * Return:
+ * -   none
+ */
 void debug_stop_all(void);
 
+/**
+ * debug_level_enabled() - Returns true if debug events for the specified
+ *			   level would be logged. Otherwise returns false.
+ *
+ * @id:		handle for debug log
+ * @level:	debug level
+ *
+ * Return:
+ * - %true if level is less or equal to the current debug level.
+ */
 static inline bool debug_level_enabled(debug_info_t *id, int level)
 {
 	return level <= id->level;
 }
 
+/**
+ * debug_event() - writes debug entry to active debug area
+ *		   (if level <= actual debug level)
+ *
+ * @id:		handle for debug log
+ * @level:	debug level
+ * @data:	pointer to data for debug entry
+ * @length:	length of data in bytes
+ *
+ * Return:
+ * - Address of written debug entry
+ */
 static inline debug_entry_t *debug_event(debug_info_t *id, int level,
 					 void *data, int length)
 {
@@ -122,6 +203,18 @@ static inline debug_entry_t *debug_event(debug_info_t *id, int level,
 	return debug_event_common(id, level, data, length);
 }
 
+/**
+ * debug_int_event() - writes debug entry to active debug area
+ * 		       (if level <= actual debug level)
+ *
+ * @id:		handle for debug log
+ * @level:	debug level
+ * @tag:	integer value for debug entry
+ *
+ * Return:
+ * - Address of written debug entry
+ * - %NULL if error
+ */
 static inline debug_entry_t *debug_int_event(debug_info_t *id, int level,
 					     unsigned int tag)
 {
@@ -132,6 +225,18 @@ static inline debug_entry_t *debug_int_event(debug_info_t *id, int level,
 	return debug_event_common(id, level, &t, sizeof(unsigned int));
 }
 
+/**
+ * debug_long_event() - writes debug entry to active debug area
+ * 		       (if level <= actual debug level)
+ *
+ * @id:		handle for debug log
+ * @level:	debug level
+ * @tag:	integer value for debug entry
+ *
+ * Return:
+ * - Address of written debug entry
+ * - %NULL if error
+ */
 static inline debug_entry_t *debug_long_event(debug_info_t *id, int level,
 					      unsigned long tag)
 {
@@ -142,6 +247,18 @@ static inline debug_entry_t *debug_long_event(debug_info_t *id, int level,
 	return debug_event_common(id, level, &t, sizeof(unsigned long));
 }
 
+/**
+ * debug_text_event() - writes debug entry in ascii format to active
+ *			debug area (if level <= actual debug level)
+ *
+ * @id:		handle for debug log
+ * @level:	debug level
+ * @txt:	string for debug entry
+ *
+ * Return:
+ * - Address of written debug entry
+ * - %NULL if error
+ */
 static inline debug_entry_t *debug_text_event(debug_info_t *id, int level,
 					      const char *txt)
 {
@@ -158,6 +275,22 @@ extern debug_entry_t *
 __debug_sprintf_event(debug_info_t *id, int level, char *string, ...)
 	__attribute__ ((format(printf, 3, 4)));
 
+/**
+ * debug_sprintf_event() - writes debug entry with format string
+ *			   and varargs (longs) to active debug area
+ *			   (if level $<=$ actual debug level).
+ *
+ * @_id:	handle for debug log
+ * @_level:	debug level
+ * @_fmt:	format string for debug entry
+ * @...:	varargs used as in sprintf()
+ *
+ * Return:
+ * - Address of written debug entry
+ * - %NULL if error
+ *
+ * floats and long long datatypes cannot be used as varargs.
+ */
 #define debug_sprintf_event(_id, _level, _fmt, ...)			\
 ({									\
 	debug_entry_t *__ret;						\
@@ -172,6 +305,20 @@ __debug_sprintf_event(debug_info_t *id, int level, char *string, ...)
 	__ret;								\
 })
 
+/**
+ * debug_exception() - writes debug entry to active debug area
+ *		       (if level <= actual debug level) and switches
+ *		       to next debug area
+ *
+ * @id:		handle for debug log
+ * @level:	debug level
+ * @data:	pointer to data for debug entry
+ * @length:	length of data in bytes
+ *
+ * Return:
+ * - Address of written debug entry
+ * - %NULL if error
+ */
 static inline debug_entry_t *debug_exception(debug_info_t *id, int level,
 					     void *data, int length)
 {
@@ -180,6 +327,19 @@ static inline debug_entry_t *debug_exception(debug_info_t *id, int level,
 	return debug_exception_common(id, level, data, length);
 }
 
+/**
+ * debug_int_exception() - writes debug entry to active debug area
+ *			   (if level <= actual debug level)
+ *			   and switches to next debug area
+ *
+ * @id:		handle for debug log
+ * @level:	debug level
+ * @tag:	integer value for debug entry
+ *
+ * Return:
+ * - Address of written debug entry
+ * - %NULL if error
+ */
 static inline debug_entry_t *debug_int_exception(debug_info_t *id, int level,
 						 unsigned int tag)
 {
@@ -190,6 +350,19 @@ static inline debug_entry_t *debug_int_exception(debug_info_t *id, int level,
 	return debug_exception_common(id, level, &t, sizeof(unsigned int));
 }
 
+/**
+ * debug_long_exception() - writes debug entry to active debug area
+ *			   (if level <= actual debug level)
+ *			   and switches to next debug area
+ *
+ * @id:		handle for debug log
+ * @level:	debug level
+ * @tag:	integer value for debug entry
+ *
+ * Return:
+ * - Address of written debug entry
+ * - %NULL if error
+ */
 static inline debug_entry_t *debug_long_exception (debug_info_t *id, int level,
 						   unsigned long tag)
 {
@@ -200,6 +373,20 @@ static inline debug_entry_t *debug_long_exception (debug_info_t *id, int level,
 	return debug_exception_common(id, level, &t, sizeof(unsigned long));
 }
 
+/**
+ * debug_text_exception() - writes debug entry in ascii format to active
+ *			    debug area (if level <= actual debug level)
+ *			    and switches to next debug
+ * area
+ *
+ * @id:	handle for debug log
+ * @level:	debug level
+ * @txt:	string for debug entry
+ *
+ * Return:
+ * - Address of written debug entry
+ * - %NULL if error
+ */
 static inline debug_entry_t *debug_text_exception(debug_info_t *id, int level,
 						  const char *txt)
 {
@@ -216,6 +403,24 @@ extern debug_entry_t *
 __debug_sprintf_exception(debug_info_t *id, int level, char *string, ...)
 	__attribute__ ((format(printf, 3, 4)));
 
+
+/**
+ * debug_sprintf_exception() - writes debug entry with format string and
+ *			       varargs (longs) to active debug area
+ * 			       (if level $<=$ actual debug level)
+ *			       and switches to next debug area.
+ *
+ * @_id:	handle for debug log
+ * @_level:	debug level
+ * @_fmt:	format string for debug entry
+ * @...:	varargs used as in sprintf()
+ *
+ * Return:
+ * - Address of written debug entry
+ * - %NULL if error
+ *
+ * floats and long long datatypes cannot be used as varargs.
+ */
 #define debug_sprintf_exception(_id, _level, _fmt, ...)			\
 ({									\
 	debug_entry_t *__ret;						\
@@ -230,7 +435,33 @@ __debug_sprintf_exception(debug_info_t *id, int level, char *string, ...)
 	__ret;								\
 })
 
+/**
+ * debug_register_view() - registers new debug view and creates debugfs
+ *			   dir entry
+ *
+ * @id:	handle for debug log
+ * @view:	pointer to debug view struct
+ *
+ * Return:
+ * -   0  : ok
+ * -   < 0: Error
+ */
 int debug_register_view(debug_info_t *id, struct debug_view *view);
+
+/**
+ * debug_unregister_view()
+ *
+ * @id:	handle for debug log
+ * @view:	pointer to debug view struct
+ *
+ * Return:
+ * -   0  : ok
+ * -   < 0: Error
+ *
+ *
+ * unregisters debug view and removes debugfs dir entry
+ */
+
 int debug_unregister_view(debug_info_t *id, struct debug_view *view);
 
 /*
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 33/79] docs: serial: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (30 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 32/79] s390: include/asm/debug.h add kerneldoc markups Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 34/79] docs: target: " Mauro Carvalho Chehab
                     ` (45 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Greg Kroah-Hartman, Jiri Slaby, Timur Tabi,
	linuxppc-dev, linux-serial

The converted files are focused at the Kernel internal API,
so, this is a good candidate for the kernel API set of books.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../{README.cycladesZ => cyclades_z.rst}      |   5 +-
 Documentation/serial/{driver => driver.rst}   | 115 +++-
 Documentation/serial/index.rst                |  32 +
 Documentation/serial/moxa-smartio             | 523 ---------------
 Documentation/serial/moxa-smartio.rst         | 615 ++++++++++++++++++
 Documentation/serial/n_gsm.rst                | 103 +++
 Documentation/serial/n_gsm.txt                |  96 ---
 .../serial/{rocket.txt => rocket.rst}         | 144 ++--
 ...{serial-iso7816.txt => serial-iso7816.rst} |  21 +-
 .../{serial-rs485.txt => serial-rs485.rst}    |  22 +-
 Documentation/serial/{tty.txt => tty.rst}     | 111 ++--
 MAINTAINERS                                   |   4 +-
 drivers/tty/Kconfig                           |   4 +-
 drivers/tty/serial/ucc_uart.c                 |   2 +-
 include/linux/serial_core.h                   |   2 +-
 15 files changed, 1011 insertions(+), 788 deletions(-)
 rename Documentation/serial/{README.cycladesZ => cyclades_z.rst} (85%)
 rename Documentation/serial/{driver => driver.rst} (92%)
 create mode 100644 Documentation/serial/index.rst
 delete mode 100644 Documentation/serial/moxa-smartio
 create mode 100644 Documentation/serial/moxa-smartio.rst
 create mode 100644 Documentation/serial/n_gsm.rst
 delete mode 100644 Documentation/serial/n_gsm.txt
 rename Documentation/serial/{rocket.txt => rocket.rst} (68%)
 rename Documentation/serial/{serial-iso7816.txt => serial-iso7816.rst} (85%)
 rename Documentation/serial/{serial-rs485.txt => serial-rs485.rst} (89%)
 rename Documentation/serial/{tty.txt => tty.rst} (74%)

diff --git a/Documentation/serial/README.cycladesZ b/Documentation/serial/cyclades_z.rst
similarity index 85%
rename from Documentation/serial/README.cycladesZ
rename to Documentation/serial/cyclades_z.rst
index 024a69443cc2..532ff67e2f1c 100644
--- a/Documentation/serial/README.cycladesZ
+++ b/Documentation/serial/cyclades_z.rst
@@ -1,8 +1,11 @@
+================
+Cyclades-Z notes
+================
 
 The Cyclades-Z must have firmware loaded onto the card before it will
 operate.  This operation should be performed during system startup,
 
 The firmware, loader program and the latest device driver code are
 available from Cyclades at
+
     ftp://ftp.cyclades.com/pub/cyclades/cyclades-z/linux/
-
diff --git a/Documentation/serial/driver b/Documentation/serial/driver.rst
similarity index 92%
rename from Documentation/serial/driver
rename to Documentation/serial/driver.rst
index 86e47c19a924..4537119bf624 100644
--- a/Documentation/serial/driver
+++ b/Documentation/serial/driver.rst
@@ -1,6 +1,6 @@
-
-			Low Level Serial API
-			--------------------
+====================
+Low Level Serial API
+====================
 
 
 This document is meant as a brief overview of some aspects of the new serial
@@ -44,7 +44,7 @@ are described in the uart_ops listing below.)
 There are two locks.  A per-port spinlock, and an overall semaphore.
 
 From the core driver perspective, the port->lock locks the following
-data:
+data::
 
 	port->mctrl
 	port->icount
@@ -75,41 +75,51 @@ hardware.
 	return TIOCSER_TEMT.
 
 	Locking: none.
+
 	Interrupts: caller dependent.
+
 	This call must not sleep
 
   set_mctrl(port, mctrl)
 	This function sets the modem control lines for port described
 	by 'port' to the state described by mctrl.  The relevant bits
 	of mctrl are:
+
 		- TIOCM_RTS	RTS signal.
 		- TIOCM_DTR	DTR signal.
 		- TIOCM_OUT1	OUT1 signal.
 		- TIOCM_OUT2	OUT2 signal.
 		- TIOCM_LOOP	Set the port into loopback mode.
+
 	If the appropriate bit is set, the signal should be driven
 	active.  If the bit is clear, the signal should be driven
 	inactive.
 
 	Locking: port->lock taken.
+
 	Interrupts: locally disabled.
+
 	This call must not sleep
 
   get_mctrl(port)
 	Returns the current state of modem control inputs.  The state
 	of the outputs should not be returned, since the core keeps
 	track of their state.  The state information should include:
+
 		- TIOCM_CAR	state of DCD signal
 		- TIOCM_CTS	state of CTS signal
 		- TIOCM_DSR	state of DSR signal
 		- TIOCM_RI	state of RI signal
+
 	The bit is set if the signal is currently driven active.  If
 	the port does not support CTS, DCD or DSR, the driver should
 	indicate that the signal is permanently active.  If RI is
 	not available, the signal should not be indicated as active.
 
 	Locking: port->lock taken.
+
 	Interrupts: locally disabled.
+
 	This call must not sleep
 
   stop_tx(port)
@@ -121,14 +131,18 @@ hardware.
 	possible.
 
 	Locking: port->lock taken.
+
 	Interrupts: locally disabled.
+
 	This call must not sleep
 
   start_tx(port)
 	Start transmitting characters.
 
 	Locking: port->lock taken.
+
 	Interrupts: locally disabled.
+
 	This call must not sleep
 
   throttle(port)
@@ -138,16 +152,17 @@ hardware.
 	This will be called only if hardware assisted flow control is enabled.
 
 	Locking: serialized with .unthrottle() and termios modification by the
-		 tty layer.
+	tty layer.
 
   unthrottle(port)
 	Notify the serial driver that characters can now be sent to the serial
 	port without fear of overrunning the input buffers of the line
 	disciplines.
+
 	This will be called only if hardware assisted flow control is enabled.
 
 	Locking: serialized with .throttle() and termios modification by the
-		 tty layer.
+	tty layer.
 
   send_xchar(port,ch)
 	Transmit a high priority character, even if the port is stopped.
@@ -159,6 +174,7 @@ hardware.
 	Do not transmit if ch == '\0' (__DISABLED_CHAR).
 
 	Locking: none.
+
 	Interrupts: caller dependent.
 
   stop_rx(port)
@@ -166,7 +182,9 @@ hardware.
 	being closed.
 
 	Locking: port->lock taken.
+
 	Interrupts: locally disabled.
+
 	This call must not sleep
 
   enable_ms(port)
@@ -177,7 +195,9 @@ hardware.
 	called.
 
 	Locking: port->lock taken.
+
 	Interrupts: locally disabled.
+
 	This call must not sleep
 
   break_ctl(port,ctl)
@@ -196,6 +216,7 @@ hardware.
 	This method will only be called when the port is initially opened.
 
 	Locking: port_sem taken.
+
 	Interrupts: globally disabled.
 
   shutdown(port)
@@ -210,6 +231,7 @@ hardware.
 	this port.
 
 	Locking: port_sem taken.
+
 	Interrupts: caller dependent.
 
   flush_buffer(port)
@@ -220,7 +242,9 @@ hardware.
 	buffer is cleared.
 
 	Locking: port->lock taken.
+
 	Interrupts: locally disabled.
+
 	This call must not sleep
 
   set_termios(port,termios,oldtermios)
@@ -228,29 +252,46 @@ hardware.
 	bits.  Update read_status_mask and ignore_status_mask to indicate
 	the types of events we are interested in receiving.  Relevant
 	termios->c_cflag bits are:
-		CSIZE	- word size
-		CSTOPB	- 2 stop bits
-		PARENB	- parity enable
-		PARODD	- odd parity (when PARENB is in force)
-		CREAD	- enable reception of characters (if not set,
+
+		CSIZE
+			- word size
+		CSTOPB
+			- 2 stop bits
+		PARENB
+			- parity enable
+		PARODD
+			- odd parity (when PARENB is in force)
+		CREAD
+			- enable reception of characters (if not set,
 			  still receive characters from the port, but
 			  throw them away.
-		CRTSCTS	- if set, enable CTS status change reporting
-		CLOCAL	- if not set, enable modem status change
+		CRTSCTS
+			- if set, enable CTS status change reporting
+		CLOCAL
+			- if not set, enable modem status change
 			  reporting.
+
 	Relevant termios->c_iflag bits are:
-		INPCK	- enable frame and parity error events to be
+
+		INPCK
+			- enable frame and parity error events to be
 			  passed to the TTY layer.
-		BRKINT
-		PARMRK	- both of these enable break events to be
+		BRKINT / PARMRK
+			- both of these enable break events to be
 			  passed to the TTY layer.
 
-		IGNPAR	- ignore parity and framing errors
-		IGNBRK	- ignore break errors,  If IGNPAR is also
+		IGNPAR
+			- ignore parity and framing errors
+		IGNBRK
+			- ignore break errors,  If IGNPAR is also
 			  set, ignore overrun errors as well.
+
 	The interaction of the iflag bits is as follows (parity error
 	given as an example):
+
+	=============== ======= ======  =============================
 	Parity error	INPCK	IGNPAR
+	=============== ======= ======  =============================
 	n/a		0	n/a	character received, marked as
 					TTY_NORMAL
 	None		1	n/a	character received, marked as
@@ -258,16 +299,19 @@ hardware.
 	Yes		1	0	character received, marked as
 					TTY_PARITY
 	Yes		1	1	character discarded
+	=============== ======= ======  =============================
 
 	Other flags may be used (eg, xon/xoff characters) if your
 	hardware supports hardware "soft" flow control.
 
 	Locking: caller holds tty_port->mutex
+
 	Interrupts: caller dependent.
+
 	This call must not sleep
 
   set_ldisc(port,termios)
-	Notifier for discipline change. See Documentation/serial/tty.txt.
+	Notifier for discipline change. See Documentation/serial/tty.rst.
 
 	Locking: caller holds tty_port->mutex
 
@@ -283,6 +327,7 @@ hardware.
 	will occur even if CONFIG_PM is not set.
 
 	Locking: none.
+
 	Interrupts: caller dependent.
 
   type(port)
@@ -291,6 +336,7 @@ hardware.
 	substituted.
 
 	Locking: none.
+
 	Interrupts: caller dependent.
 
   release_port(port)
@@ -298,6 +344,7 @@ hardware.
 	the port.
 
 	Locking: none.
+
 	Interrupts: caller dependent.
 
   request_port(port)
@@ -306,6 +353,7 @@ hardware.
 	returns, and it should return -EBUSY on failure.
 
 	Locking: none.
+
 	Interrupts: caller dependent.
 
   config_port(port,type)
@@ -321,6 +369,7 @@ hardware.
 	internally hard wired (eg, system on a chip implementations).
 
 	Locking: none.
+
 	Interrupts: caller dependent.
 
   verify_port(port,serinfo)
@@ -328,6 +377,7 @@ hardware.
 	suitable for this port type.
 
 	Locking: none.
+
 	Interrupts: caller dependent.
 
   ioctl(port,cmd,arg)
@@ -335,6 +385,7 @@ hardware.
 	using the standard numbering system found in <asm/ioctl.h>
 
 	Locking: none.
+
 	Interrupts: caller dependent.
 
   poll_init(port)
@@ -343,6 +394,7 @@ hardware.
 	this should not request interrupts.
 
 	Locking: tty_mutex and tty_port->mutex taken.
+
 	Interrupts: n/a.
 
   poll_put_char(port,ch)
@@ -350,7 +402,9 @@ hardware.
 	port.  It can and should block until there is space in the TX FIFO.
 
 	Locking: none.
+
 	Interrupts: caller dependent.
+
 	This call must not sleep
 
   poll_get_char(port)
@@ -359,7 +413,9 @@ hardware.
 	the function should return NO_POLL_CHAR immediately.
 
 	Locking: none.
+
 	Interrupts: caller dependent.
+
 	This call must not sleep
 
 Other functions
@@ -370,6 +426,7 @@ uart_update_timeout(port,cflag,baud)
 	number of bits, parity, stop bits and baud rate.
 
 	Locking: caller is expected to take port->lock
+
 	Interrupts: n/a
 
 uart_get_baud_rate(port,termios,old,min,max)
@@ -385,6 +442,7 @@ uart_get_baud_rate(port,termios,old,min,max)
 	Note: min..max must always allow 9600 baud to be selected.
 
 	Locking: caller dependent.
+
 	Interrupts: n/a
 
 uart_get_divisor(port,baud)
@@ -395,6 +453,7 @@ uart_get_divisor(port,baud)
 	custom divisor instead.
 
 	Locking: caller dependent.
+
 	Interrupts: n/a
 
 uart_match_port(port1,port2)
@@ -402,6 +461,7 @@ uart_match_port(port1,port2)
 	uart_port structures describe the same port.
 
 	Locking: n/a
+
 	Interrupts: n/a
 
 uart_write_wakeup(port)
@@ -409,6 +469,7 @@ uart_write_wakeup(port)
 	characters in the transmit buffer have dropped below a threshold.
 
 	Locking: port->lock should be held.
+
 	Interrupts: n/a
 
 uart_register_driver(drv)
@@ -419,6 +480,7 @@ uart_register_driver(drv)
 	registered using uart_add_one_port after this call has succeeded.
 
 	Locking: none
+
 	Interrupts: enabled
 
 uart_unregister_driver()
@@ -427,15 +489,16 @@ uart_unregister_driver()
 	uart_remove_one_port() if it registered them with uart_add_one_port().
 
 	Locking: none
+
 	Interrupts: enabled
 
-uart_suspend_port()
+**uart_suspend_port()**
 
-uart_resume_port()
+**uart_resume_port()**
 
-uart_add_one_port()
+**uart_add_one_port()**
 
-uart_remove_one_port()
+**uart_remove_one_port()**
 
 Other notes
 -----------
@@ -444,7 +507,7 @@ It is intended some day to drop the 'unused' entries from uart_port, and
 allow low level drivers to register their own individual uart_port's with
 the core.  This will allow drivers to use uart_port as a pointer to a
 structure containing both the uart_port entry with their own extensions,
-thus:
+thus::
 
 	struct my_port {
 		struct uart_port	port;
@@ -459,14 +522,14 @@ Some helpers are provided in order to set/get modem control lines via GPIO.
 mctrl_gpio_init(port, idx):
 	This will get the {cts,rts,...}-gpios from device tree if they are
 	present and request them, set direction etc, and return an
-	allocated structure. devm_* functions are used, so there's no need
+	allocated structure. `devm_*` functions are used, so there's no need
 	to call mctrl_gpio_free().
 	As this sets up the irq handling make sure to not handle changes to the
 	gpio input lines in your driver, too.
 
 mctrl_gpio_free(dev, gpios):
 	This will free the requested gpios in mctrl_gpio_init().
-	As devm_* functions are used, there's generally no need to call
+	As `devm_*` functions are used, there's generally no need to call
 	this function.
 
 mctrl_gpio_to_gpiod(gpios, gidx)
diff --git a/Documentation/serial/index.rst b/Documentation/serial/index.rst
new file mode 100644
index 000000000000..d0ba22ea23bf
--- /dev/null
+++ b/Documentation/serial/index.rst
@@ -0,0 +1,32 @@
+:orphan:
+
+==========================
+Support for Serial devices
+==========================
+
+.. toctree::
+    :maxdepth: 1
+
+
+    driver
+    tty
+
+Serial drivers
+==============
+
+.. toctree::
+    :maxdepth: 1
+
+    cyclades_z
+    moxa-smartio
+    n_gsm
+    rocket
+    serial-iso7816
+    serial-rs485
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/serial/moxa-smartio b/Documentation/serial/moxa-smartio
deleted file mode 100644
index 5d2a33be0bd8..000000000000
--- a/Documentation/serial/moxa-smartio
+++ /dev/null
@@ -1,523 +0,0 @@
-=============================================================================
-          MOXA Smartio/Industio Family Device Driver Installation Guide
-		    for Linux Kernel 2.4.x, 2.6.x
-	       Copyright (C) 2008, Moxa Inc.
-=============================================================================
-Date: 01/21/2008
-
-Content
-
-1. Introduction
-2. System Requirement
-3. Installation
-   3.1 Hardware installation
-   3.2 Driver files
-   3.3 Device naming convention
-   3.4 Module driver configuration
-   3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x.
-   3.6 Custom configuration
-   3.7 Verify driver installation
-4. Utilities
-5. Setserial
-6. Troubleshooting
-
------------------------------------------------------------------------------
-1. Introduction
-
-   The Smartio/Industio/UPCI family Linux driver supports following multiport
-   boards.
-
-    - 2 ports multiport board
-	CP-102U, CP-102UL, CP-102UF
-	CP-132U-I, CP-132UL,
-	CP-132, CP-132I, CP132S, CP-132IS,
-	CI-132, CI-132I, CI-132IS,
-	(C102H, C102HI, C102HIS, C102P, CP-102, CP-102S)
-
-    - 4 ports multiport board
-	CP-104EL,
-	CP-104UL, CP-104JU,
-	CP-134U, CP-134U-I,
-	C104H/PCI, C104HS/PCI,
-	CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL,
-	C104H, C104HS,
-	CI-104J, CI-104JS,
-	CI-134, CI-134I, CI-134IS,
-	(C114HI, CT-114I, C104P)
-	POS-104UL,
-	CB-114,
-	CB-134I
-
-    - 8 ports multiport board
-	CP-118EL, CP-168EL,
-	CP-118U, CP-168U,
-	C168H/PCI,
-	C168H, C168HS,
-	(C168P),
-	CB-108
-
-   This driver and installation procedure have been developed upon Linux Kernel
-   2.4.x and 2.6.x. This driver supports Intel x86 hardware platform. In order
-   to maintain compatibility, this version has also been properly tested with
-   RedHat, Mandrake, Fedora and S.u.S.E Linux. However, if compatibility problem
-   occurs, please contact Moxa at support@moxa.com.tw.
-
-   In addition to device driver, useful utilities are also provided in this
-   version. They are
-    - msdiag     Diagnostic program for displaying installed Moxa
-                 Smartio/Industio boards.
-    - msmon      Monitor program to observe data count and line status signals.
-    - msterm     A simple terminal program which is useful in testing serial
-	         ports.
-    - io-irq.exe Configuration program to setup ISA boards. Please note that
-                 this program can only be executed under DOS.
-
-   All the drivers and utilities are published in form of source code under
-   GNU General Public License in this version. Please refer to GNU General
-   Public License announcement in each source code file for more detail.
-
-   In Moxa's Web sites, you may always find latest driver at http://www.moxa.com/.
-
-   This version of driver can be installed as Loadable Module (Module driver)
-   or built-in into kernel (Static driver). You may refer to following
-   installation procedure for suitable one. Before you install the driver,
-   please refer to hardware installation procedure in the User's Manual.
-
-   We assume the user should be familiar with following documents.
-   - Serial-HOWTO
-   - Kernel-HOWTO
-
------------------------------------------------------------------------------
-2. System Requirement
-   - Hardware platform: Intel x86 machine
-   - Kernel version: 2.4.x or 2.6.x
-   - gcc version 2.72 or later
-   - Maximum 4 boards can be installed in combination
-
------------------------------------------------------------------------------
-3. Installation
-
-   3.1 Hardware installation
-   3.2 Driver files
-   3.3 Device naming convention
-   3.4 Module driver configuration
-   3.5 Static driver configuration for Linux kernel 2.4.x, 2.6.x.
-   3.6 Custom configuration
-   3.7 Verify driver installation
-
-
-   3.1 Hardware installation
-
-       There are two types of buses, ISA and PCI, for Smartio/Industio
-       family multiport board.
-
-       ISA board
-       ---------
-       You'll have to configure CAP address, I/O address, Interrupt Vector
-       as well as IRQ before installing this driver. Please refer to hardware
-       installation procedure in User's Manual before proceed any further.
-       Please make sure the JP1 is open after the ISA board is set properly.
-
-       PCI/UPCI board
-       --------------
-       You may need to adjust IRQ usage in BIOS to avoid from IRQ conflict
-       with other ISA devices. Please refer to hardware installation
-       procedure in User's Manual in advance.
-
-       PCI IRQ Sharing
-       -----------
-       Each port within the same multiport board shares the same IRQ. Up to
-       4 Moxa Smartio/Industio PCI Family multiport boards can be installed
-       together on one system and they can share the same IRQ.
-
-
-   3.2 Driver files
-
-       The driver file may be obtained from ftp, CD-ROM or floppy disk. The
-       first step, anyway, is to copy driver file "mxser.tgz" into specified
-       directory. e.g. /moxa. The execute commands as below.
-
-       # cd /
-       # mkdir moxa
-       # cd /moxa
-       # tar xvf /dev/fd0
-
-       or
-
-       # cd /
-       # mkdir moxa
-       # cd /moxa
-       # cp /mnt/cdrom/<driver directory>/mxser.tgz .
-       # tar xvfz mxser.tgz
-
-
-   3.3 Device naming convention
-
-       You may find all the driver and utilities files in /moxa/mxser.
-       Following installation procedure depends on the model you'd like to
-       run the driver. If you prefer module driver, please refer to 3.4.
-       If static driver is required, please refer to 3.5.
-
-       Dialin and callout port
-       -----------------------
-       This driver remains traditional serial device properties. There are
-       two special file name for each serial port. One is dial-in port
-       which is named "ttyMxx". For callout port, the naming convention
-       is "cumxx".
-
-       Device naming when more than 2 boards installed
-       -----------------------------------------------
-       Naming convention for each Smartio/Industio multiport board is
-       pre-defined as below.
-
-       Board Num.	 Dial-in Port	      Callout port
-       1st board	ttyM0  - ttyM7	      cum0  - cum7
-       2nd board	ttyM8  - ttyM15       cum8  - cum15
-       3rd board	ttyM16 - ttyM23       cum16 - cum23
-       4th board	ttyM24 - ttym31       cum24 - cum31
-
-
-       !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-       Under Kernel 2.6 the cum Device is Obsolete. So use ttyM*
-       device instead.
-       !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
-       Board sequence
-       --------------
-       This driver will activate ISA boards according to the parameter set
-       in the driver. After all specified ISA board activated, PCI board
-       will be installed in the system automatically driven.
-       Therefore the board number is sorted by the CAP address of ISA boards.
-       For PCI boards, their sequence will be after ISA boards and C168H/PCI
-       has higher priority than C104H/PCI boards.
-
-   3.4 Module driver configuration
-       Module driver is easiest way to install. If you prefer static driver
-       installation, please skip this paragraph.
-
-
-       ------------- Prepare to use the MOXA driver--------------------
-       3.4.1 Create tty device with correct major number
-          Before using MOXA driver, your system must have the tty devices
-          which are created with driver's major number. We offer one shell
-          script "msmknod" to simplify the procedure.
-          This step is only needed to be executed once. But you still
-          need to do this procedure when:
-          a. You change the driver's major number. Please refer the "3.7"
-             section.
-          b. Your total installed MOXA boards number is changed. Maybe you
-             add/delete one MOXA board.
-          c. You want to change the tty name. This needs to modify the
-             shell script "msmknod"
-
-          The procedure is:
-	  # cd /moxa/mxser/driver
-	  # ./msmknod
-
-          This shell script will require the major number for dial-in
-          device and callout device to create tty device. You also need
-          to specify the total installed MOXA board number. Default major
-          numbers for dial-in device and callout device are 30, 35. If
-          you need to change to other number, please refer section "3.7"
-          for more detailed procedure.
-          Msmknod will delete any special files occupying the same device
-          naming.
-
-       3.4.2 Build the MOXA driver and utilities
-          Before using the MOXA driver and utilities, you need compile the
-          all the source code. This step is only need to be executed once.
-          But you still re-compile the source code if you modify the source
-          code. For example, if you change the driver's major number (see
-          "3.7" section), then you need to do this step again.
-
-          Find "Makefile" in /moxa/mxser, then run
-
-	  # make clean; make install
-
-          !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!
-	  For Red Hat 9, Red Hat Enterprise Linux AS3/ES3/WS3 & Fedora Core1:
-	  # make clean; make installsp1
-
-	  For Red Hat Enterprise Linux AS4/ES4/WS4:
-	  # make clean; make installsp2
-          !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!
-
-	  The driver files "mxser.o" and utilities will be properly compiled
-	  and copied to system directories respectively.
-
-       ------------- Load MOXA driver--------------------
-       3.4.3 Load the MOXA driver
-
-	  # modprobe mxser <argument>
-
-	  will activate the module driver. You may run "lsmod" to check
-	  if "mxser" is activated. If the MOXA board is ISA board, the
-          <argument> is needed. Please refer to section "3.4.5" for more
-          information.
-
-
-       ------------- Load MOXA driver on boot --------------------
-       3.4.4 For the above description, you may manually execute
-          "modprobe mxser" to activate this driver and run
-	  "rmmod mxser" to remove it.
-          However, it's better to have a boot time configuration to
-          eliminate manual operation. Boot time configuration can be
-          achieved by rc file. We offer one "rc.mxser" file to simplify
-          the procedure under "moxa/mxser/driver".
-
-          But if you use ISA board, please modify the "modprobe ..." command
-          to add the argument (see "3.4.5" section). After modifying the
-          rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser"
-          manually to make sure the modification is ok. If any error
-          encountered, please try to modify again. If the modification is
-          completed, follow the below step.
-
-	  Run following command for setting rc files.
-
-	  # cd /moxa/mxser/driver
-	  # cp ./rc.mxser /etc/rc.d
-	  # cd /etc/rc.d
-
-	  Check "rc.serial" is existed or not. If "rc.serial" doesn't exist,
-	  create it by vi, run "chmod 755 rc.serial" to change the permission.
-	  Add "/etc/rc.d/rc.mxser" in last line,
-
-          Reboot and check if moxa.o activated by "lsmod" command.
-
-       3.4.5. If you'd like to drive Smartio/Industio ISA boards in the system,
-          you'll have to add parameter to specify CAP address of given
-	  board while activating "mxser.o". The format for parameters are
-	  as follows.
-
-	  modprobe mxser ioaddr=0x???,0x???,0x???,0x???
-				|      |     |	  |
-				|      |     |	  +- 4th ISA board
-				|      |     +------ 3rd ISA board
-				|      +------------ 2nd ISA board
-				+------------------- 1st ISA board
-
-   3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x
-
-       Note: To use static driver, you must install the linux kernel
-             source package.
-
-       3.5.1 Backup the built-in driver in the kernel.
-          # cd /usr/src/linux/drivers/char
-          # mv mxser.c mxser.c.old
-
-          For Red Hat 7.x user, you need to create link:
-          # cd /usr/src
-          # ln -s linux-2.4 linux
-
-       3.5.2 Create link
-	  # cd /usr/src/linux/drivers/char
-	  # ln -s /moxa/mxser/driver/mxser.c mxser.c
-
-       3.5.3 Add CAP address list for ISA boards. For PCI boards user,
-          please skip this step.
-
-	  In module mode, the CAP address for ISA board is given by
-	  parameter. In static driver configuration, you'll have to
-	  assign it within driver's source code. If you will not
-	  install any ISA boards, you may skip to next portion.
-	  The instructions to modify driver source code are as
-	  below.
-	  a. # cd /moxa/mxser/driver
-	     # vi mxser.c
-	  b. Find the array mxserBoardCAP[] as below.
-
-	     static int mxserBoardCAP[]
-	     = {0x00, 0x00, 0x00, 0x00};
-
-	  c. Change the address within this array using vi. For
-	     example, to driver 2 ISA boards with CAP address
-	     0x280 and 0x180 as 1st and 2nd board. Just to change
-	     the source code as follows.
-
-	     static int mxserBoardCAP[]
-	     = {0x280, 0x180, 0x00, 0x00};
-
-       3.5.4 Setup kernel configuration
-
-          Configure the kernel:
-
-            # cd /usr/src/linux
-            # make menuconfig
-
-          You will go into a menu-driven system. Please select [Character
-          devices][Non-standard serial port support], enable the [Moxa
-          SmartIO support] driver with "[*]" for built-in (not "[M]"), then
-          select [Exit] to exit this program.
-
-       3.5.5 Rebuild kernel
-	  The following are for Linux kernel rebuilding, for your
-          reference only.
-	  For appropriate details, please refer to the Linux document.
-
-	   a. cd /usr/src/linux
-	   b. make clean	     /* take a few minutes */
-	   c. make dep		     /* take a few minutes */
-	   d. make bzImage	     /* take probably 10-20 minutes */
-	   e. make install	     /* copy boot image to correct position */
-	   f. Please make sure the boot kernel (vmlinuz) is in the
-	      correct position.
-	   g. If you use 'lilo' utility, you should check /etc/lilo.conf
-	      'image' item specified the path which is the 'vmlinuz' path,
-	      or you will load wrong (or old) boot kernel image (vmlinuz).
-	      After checking /etc/lilo.conf, please run "lilo".
-
-	  Note that if the result of "make bzImage" is ERROR, then you have to
-	  go back to Linux configuration Setup. Type "make menuconfig" in
-          directory /usr/src/linux.
-
-
-       3.5.6 Make tty device and special file
-          # cd /moxa/mxser/driver
-          # ./msmknod
-
-       3.5.7 Make utility
-	  # cd /moxa/mxser/utility
-	  # make clean; make install
-
-       3.5.8 Reboot
-
-
-
-   3.6 Custom configuration
-       Although this driver already provides you default configuration, you
-       still can change the device name and major number. The instruction to
-       change these parameters are shown as below.
-
-       Change Device name
-       ------------------
-       If you'd like to use other device names instead of default naming
-       convention, all you have to do is to modify the internal code
-       within the shell script "msmknod". First, you have to open "msmknod"
-       by vi. Locate each line contains "ttyM" and "cum" and change them
-       to the device name you desired. "msmknod" creates the device names
-       you need next time executed.
-
-       Change Major number
-       -------------------
-       If major number 30 and 35 had been occupied, you may have to select
-       2 free major numbers for this driver. There are 3 steps to change
-       major numbers.
-
-       3.6.1 Find free major numbers
-	  In /proc/devices, you may find all the major numbers occupied
-	  in the system. Please select 2 major numbers that are available.
-	  e.g. 40, 45.
-       3.6.2 Create special files
-	  Run /moxa/mxser/driver/msmknod to create special files with
-	  specified major numbers.
-       3.6.3 Modify driver with new major number
-	  Run vi to open /moxa/mxser/driver/mxser.c. Locate the line
-	  contains "MXSERMAJOR". Change the content as below.
-	  #define	  MXSERMAJOR		  40
-	  #define	  MXSERCUMAJOR		  45
-       3.6.4 Run "make clean; make install" in /moxa/mxser/driver.
-
-   3.7 Verify driver installation
-       You may refer to /var/log/messages to check the latest status
-       log reported by this driver whenever it's activated.
-
------------------------------------------------------------------------------
-4. Utilities
-   There are 3 utilities contained in this driver. They are msdiag, msmon and
-   msterm. These 3 utilities are released in form of source code. They should
-   be compiled into executable file and copied into /usr/bin.
-
-   Before using these utilities, please load driver (refer 3.4 & 3.5) and
-   make sure you had run the "msmknod" utility.
-
-   msdiag - Diagnostic
-   --------------------
-   This utility provides the function to display what Moxa Smartio/Industio
-   board found by driver in the system.
-
-   msmon - Port Monitoring
-   -----------------------
-   This utility gives the user a quick view about all the MOXA ports'
-   activities. One can easily learn each port's total received/transmitted
-   (Rx/Tx) character count since the time when the monitoring is started.
-   Rx/Tx throughputs per second are also reported in interval basis (e.g.
-   the last 5 seconds) and in average basis (since the time the monitoring
-   is started). You can reset all ports' count by <HOME> key. <+> <->
-   (plus/minus) keys to change the displaying time interval. Press <ENTER>
-   on the port, that cursor stay, to view the port's communication
-   parameters, signal status, and input/output queue.
-
-   msterm - Terminal Emulation
-   ---------------------------
-   This utility provides data sending and receiving ability of all tty ports,
-   especially for MOXA ports. It is quite useful for testing simple
-   application, for example, sending AT command to a modem connected to the
-   port or used as a terminal for login purpose. Note that this is only a
-   dumb terminal emulation without handling full screen operation.
-
------------------------------------------------------------------------------
-5. Setserial
-
-   Supported Setserial parameters are listed as below.
-
-   uart		  set UART type(16450-->disable FIFO, 16550A-->enable FIFO)
-   close_delay	  set the amount of time(in 1/100 of a second) that DTR
-		  should be kept low while being closed.
-   closing_wait   set the amount of time(in 1/100 of a second) that the
-		  serial port should wait for data to be drained while
-		  being closed, before the receiver is disable.
-   spd_hi	  Use  57.6kb  when  the application requests 38.4kb.
-   spd_vhi	  Use  115.2kb	when  the application requests 38.4kb.
-   spd_shi	  Use  230.4kb	when  the application requests 38.4kb.
-   spd_warp	  Use  460.8kb	when  the application requests 38.4kb.
-   spd_normal	  Use  38.4kb  when  the application requests 38.4kb.
-   spd_cust	  Use  the custom divisor to set the speed when  the
-		  application requests 38.4kb.
-   divisor	  This option set the custom division.
-   baud_base	  This option set the base baud rate.
-
------------------------------------------------------------------------------
-6. Troubleshooting
-
-   The boot time error messages and solutions are stated as clearly as
-   possible. If all the possible solutions fail, please contact our technical
-   support team to get more help.
-
-
-   Error msg: More than 4 Moxa Smartio/Industio family boards found. Fifth board
-              and after are ignored.
-   Solution:
-   To avoid this problem, please unplug fifth and after board, because Moxa
-   driver supports up to 4 boards.
-
-   Error msg: Request_irq fail, IRQ(?) may be conflict with another device.
-   Solution:
-   Other PCI or ISA devices occupy the assigned IRQ. If you are not sure
-   which device causes the situation, please check /proc/interrupts to find
-   free IRQ and simply change another free IRQ for Moxa board.
-
-   Error msg: Board #: C1xx Series(CAP=xxx) interrupt number invalid.
-   Solution:
-   Each port within the same multiport board shares the same IRQ. Please set
-   one IRQ (IRQ doesn't equal to zero) for one Moxa board.
-
-   Error msg: No interrupt vector be set for Moxa ISA board(CAP=xxx).
-   Solution:
-   Moxa ISA board needs an interrupt vector.Please refer to user's manual
-   "Hardware Installation" chapter to set interrupt vector.
-
-   Error msg: Couldn't install MOXA Smartio/Industio family driver!
-   Solution:
-   Load Moxa driver fail, the major number may conflict with other devices.
-   Please refer to previous section 3.7 to change a free major number for
-   Moxa driver.
-
-   Error msg: Couldn't install MOXA Smartio/Industio family callout driver!
-   Solution:
-   Load Moxa callout driver fail, the callout device major number may
-   conflict with other devices. Please refer to previous section 3.7 to
-   change a free callout device major number for Moxa driver.
-
-
------------------------------------------------------------------------------
-
diff --git a/Documentation/serial/moxa-smartio.rst b/Documentation/serial/moxa-smartio.rst
new file mode 100644
index 000000000000..156100f17c3f
--- /dev/null
+++ b/Documentation/serial/moxa-smartio.rst
@@ -0,0 +1,615 @@
+=============================================================
+MOXA Smartio/Industio Family Device Driver Installation Guide
+=============================================================
+
+.. note::
+
+   This file is outdated. It needs some care in order to make it
+   updated to Kernel 5.0 and upper
+
+Copyright (C) 2008, Moxa Inc.
+
+Date: 01/21/2008
+
+.. Content
+
+   1. Introduction
+   2. System Requirement
+   3. Installation
+      3.1 Hardware installation
+      3.2 Driver files
+      3.3 Device naming convention
+      3.4 Module driver configuration
+      3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x.
+      3.6 Custom configuration
+      3.7 Verify driver installation
+   4. Utilities
+   5. Setserial
+   6. Troubleshooting
+
+1. Introduction
+^^^^^^^^^^^^^^^
+
+   The Smartio/Industio/UPCI family Linux driver supports following multiport
+   boards.
+
+    - 2 ports multiport board
+	CP-102U, CP-102UL, CP-102UF
+	CP-132U-I, CP-132UL,
+	CP-132, CP-132I, CP132S, CP-132IS,
+	CI-132, CI-132I, CI-132IS,
+	(C102H, C102HI, C102HIS, C102P, CP-102, CP-102S)
+
+    - 4 ports multiport board
+	CP-104EL,
+	CP-104UL, CP-104JU,
+	CP-134U, CP-134U-I,
+	C104H/PCI, C104HS/PCI,
+	CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL,
+	C104H, C104HS,
+	CI-104J, CI-104JS,
+	CI-134, CI-134I, CI-134IS,
+	(C114HI, CT-114I, C104P),
+	POS-104UL,
+	CB-114,
+	CB-134I
+
+    - 8 ports multiport board
+	CP-118EL, CP-168EL,
+	CP-118U, CP-168U,
+	C168H/PCI,
+	C168H, C168HS,
+	(C168P),
+	CB-108
+
+   This driver and installation procedure have been developed upon Linux Kernel
+   2.4.x and 2.6.x. This driver supports Intel x86 hardware platform. In order
+   to maintain compatibility, this version has also been properly tested with
+   RedHat, Mandrake, Fedora and S.u.S.E Linux. However, if compatibility problem
+   occurs, please contact Moxa at support@moxa.com.tw.
+
+   In addition to device driver, useful utilities are also provided in this
+   version. They are:
+
+    - msdiag
+		 Diagnostic program for displaying installed Moxa
+                 Smartio/Industio boards.
+    - msmon
+		 Monitor program to observe data count and line status signals.
+    - msterm     A simple terminal program which is useful in testing serial
+	         ports.
+    - io-irq.exe
+		 Configuration program to setup ISA boards. Please note that
+                 this program can only be executed under DOS.
+
+   All the drivers and utilities are published in form of source code under
+   GNU General Public License in this version. Please refer to GNU General
+   Public License announcement in each source code file for more detail.
+
+   In Moxa's Web sites, you may always find latest driver at http://www.moxa.com/.
+
+   This version of driver can be installed as Loadable Module (Module driver)
+   or built-in into kernel (Static driver). You may refer to following
+   installation procedure for suitable one. Before you install the driver,
+   please refer to hardware installation procedure in the User's Manual.
+
+   We assume the user should be familiar with following documents.
+
+   - Serial-HOWTO
+   - Kernel-HOWTO
+
+2. System Requirement
+^^^^^^^^^^^^^^^^^^^^^
+
+   - Hardware platform: Intel x86 machine
+   - Kernel version: 2.4.x or 2.6.x
+   - gcc version 2.72 or later
+   - Maximum 4 boards can be installed in combination
+
+3. Installation
+^^^^^^^^^^^^^^^
+
+3.1 Hardware installation
+=========================
+
+   There are two types of buses, ISA and PCI, for Smartio/Industio
+   family multiport board.
+
+ISA board
+---------
+
+   You'll have to configure CAP address, I/O address, Interrupt Vector
+   as well as IRQ before installing this driver. Please refer to hardware
+   installation procedure in User's Manual before proceed any further.
+   Please make sure the JP1 is open after the ISA board is set properly.
+
+PCI/UPCI board
+--------------
+
+   You may need to adjust IRQ usage in BIOS to avoid from IRQ conflict
+   with other ISA devices. Please refer to hardware installation
+   procedure in User's Manual in advance.
+
+PCI IRQ Sharing
+---------------
+
+   Each port within the same multiport board shares the same IRQ. Up to
+   4 Moxa Smartio/Industio PCI Family multiport boards can be installed
+   together on one system and they can share the same IRQ.
+
+
+3.2 Driver files
+================
+
+   The driver file may be obtained from ftp, CD-ROM or floppy disk. The
+   first step, anyway, is to copy driver file "mxser.tgz" into specified
+   directory. e.g. /moxa. The execute commands as below::
+
+       # cd /
+       # mkdir moxa
+       # cd /moxa
+       # tar xvf /dev/fd0
+
+or::
+
+       # cd /
+       # mkdir moxa
+       # cd /moxa
+       # cp /mnt/cdrom/<driver directory>/mxser.tgz .
+       # tar xvfz mxser.tgz
+
+
+3.3 Device naming convention
+============================
+
+   You may find all the driver and utilities files in /moxa/mxser.
+   Following installation procedure depends on the model you'd like to
+   run the driver. If you prefer module driver, please refer to 3.4.
+   If static driver is required, please refer to 3.5.
+
+Dialin and callout port
+-----------------------
+
+   This driver remains traditional serial device properties. There are
+   two special file name for each serial port. One is dial-in port
+   which is named "ttyMxx". For callout port, the naming convention
+   is "cumxx".
+
+Device naming when more than 2 boards installed
+-----------------------------------------------
+
+   Naming convention for each Smartio/Industio multiport board is
+   pre-defined as below.
+
+   ============ ===============       ==============
+   Board Num.	 Dial-in Port	      Callout port
+   1st board	ttyM0  - ttyM7	      cum0  - cum7
+   2nd board	ttyM8  - ttyM15       cum8  - cum15
+   3rd board	ttyM16 - ttyM23       cum16 - cum23
+   4th board	ttyM24 - ttym31       cum24 - cum31
+   ============ ===============       ==============
+
+.. note::
+
+   Under Kernel 2.6 and upper, the cum Device is Obsolete. So use ttyM*
+   device instead.
+
+Board sequence
+--------------
+
+   This driver will activate ISA boards according to the parameter set
+   in the driver. After all specified ISA board activated, PCI board
+   will be installed in the system automatically driven.
+   Therefore the board number is sorted by the CAP address of ISA boards.
+   For PCI boards, their sequence will be after ISA boards and C168H/PCI
+   has higher priority than C104H/PCI boards.
+
+3.4 Module driver configuration
+===============================
+
+   Module driver is easiest way to install. If you prefer static driver
+   installation, please skip this paragraph.
+
+
+   ------------- Prepare to use the MOXA driver --------------------
+
+3.4.1 Create tty device with correct major number
+-------------------------------------------------
+
+   Before using MOXA driver, your system must have the tty devices
+   which are created with driver's major number. We offer one shell
+   script "msmknod" to simplify the procedure.
+   This step is only needed to be executed once. But you still
+   need to do this procedure when:
+
+   a. You change the driver's major number. Please refer the "3.7"
+      section.
+   b. Your total installed MOXA boards number is changed. Maybe you
+      add/delete one MOXA board.
+   c. You want to change the tty name. This needs to modify the
+      shell script "msmknod"
+
+   The procedure is::
+
+	 # cd /moxa/mxser/driver
+	 # ./msmknod
+
+   This shell script will require the major number for dial-in
+   device and callout device to create tty device. You also need
+   to specify the total installed MOXA board number. Default major
+   numbers for dial-in device and callout device are 30, 35. If
+   you need to change to other number, please refer section "3.7"
+   for more detailed procedure.
+   Msmknod will delete any special files occupying the same device
+   naming.
+
+3.4.2 Build the MOXA driver and utilities
+-----------------------------------------
+
+   Before using the MOXA driver and utilities, you need compile the
+   all the source code. This step is only need to be executed once.
+   But you still re-compile the source code if you modify the source
+   code. For example, if you change the driver's major number (see
+   "3.7" section), then you need to do this step again.
+
+   Find "Makefile" in /moxa/mxser, then run
+
+	 # make clean; make install
+
+   ..note::
+
+	 For Red Hat 9, Red Hat Enterprise Linux AS3/ES3/WS3 & Fedora Core1:
+	 # make clean; make installsp1
+
+	 For Red Hat Enterprise Linux AS4/ES4/WS4:
+	 # make clean; make installsp2
+
+   The driver files "mxser.o" and utilities will be properly compiled
+   and copied to system directories respectively.
+
+------------- Load MOXA driver--------------------
+
+3.4.3 Load the MOXA driver
+--------------------------
+
+   ::
+
+	 # modprobe mxser <argument>
+
+   will activate the module driver. You may run "lsmod" to check
+   if "mxser" is activated. If the MOXA board is ISA board, the
+   <argument> is needed. Please refer to section "3.4.5" for more
+   information.
+
+------------- Load MOXA driver on boot --------------------
+
+3.4.4 Load the mxser driver
+---------------------------
+
+
+   For the above description, you may manually execute
+   "modprobe mxser" to activate this driver and run
+   "rmmod mxser" to remove it.
+
+   However, it's better to have a boot time configuration to
+   eliminate manual operation. Boot time configuration can be
+   achieved by rc file. We offer one "rc.mxser" file to simplify
+   the procedure under "moxa/mxser/driver".
+
+   But if you use ISA board, please modify the "modprobe ..." command
+   to add the argument (see "3.4.5" section). After modifying the
+   rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser"
+   manually to make sure the modification is ok. If any error
+   encountered, please try to modify again. If the modification is
+   completed, follow the below step.
+
+   Run following command for setting rc files::
+
+	 # cd /moxa/mxser/driver
+	 # cp ./rc.mxser /etc/rc.d
+	 # cd /etc/rc.d
+
+   Check "rc.serial" is existed or not. If "rc.serial" doesn't exist,
+   create it by vi, run "chmod 755 rc.serial" to change the permission.
+
+   Add "/etc/rc.d/rc.mxser" in last line.
+
+   Reboot and check if moxa.o activated by "lsmod" command.
+
+3.4.5. specify CAP address
+--------------------------
+
+   If you'd like to drive Smartio/Industio ISA boards in the system,
+   you'll have to add parameter to specify CAP address of given
+   board while activating "mxser.o". The format for parameters are
+   as follows.::
+
+	   modprobe mxser ioaddr=0x???,0x???,0x???,0x???
+				  |  |  |    |
+				  |  |  |    +- 4th ISA board
+				  |  |  +------ 3rd ISA board
+				  |  +------------ 2nd ISA board
+				  +-------------------1st ISA board
+
+3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x
+================================================================
+
+    Note:
+          To use static driver, you must install the linux kernel
+          source package.
+
+3.5.1 Backup the built-in driver in the kernel
+----------------------------------------------
+
+    ::
+
+       # cd /usr/src/linux/drivers/char
+       # mv mxser.c mxser.c.old
+
+       For Red Hat 7.x user, you need to create link:
+       # cd /usr/src
+       # ln -s linux-2.4 linux
+
+3.5.2 Create link
+-----------------
+    ::
+
+	  # cd /usr/src/linux/drivers/char
+	  # ln -s /moxa/mxser/driver/mxser.c mxser.c
+
+3.5.3 Add CAP address list for ISA boards.
+------------------------------------------
+
+    For PCI boards user, please skip this step.
+
+    In module mode, the CAP address for ISA board is given by
+    parameter. In static driver configuration, you'll have to
+    assign it within driver's source code. If you will not
+    install any ISA boards, you may skip to next portion.
+    The instructions to modify driver source code are as
+    below.
+
+    a. run::
+
+	# cd /moxa/mxser/driver
+	# vi mxser.c
+
+    b. Find the array mxserBoardCAP[] as below::
+
+	  static int mxserBoardCAP[] = {0x00, 0x00, 0x00, 0x00};
+
+    c. Change the address within this array using vi. For
+       example, to driver 2 ISA boards with CAP address
+       0x280 and 0x180 as 1st and 2nd board. Just to change
+       the source code as follows::
+
+	  static int mxserBoardCAP[] = {0x280, 0x180, 0x00, 0x00};
+
+3.5.4 Setup kernel configuration
+--------------------------------
+
+    Configure the kernel::
+
+      # cd /usr/src/linux
+      # make menuconfig
+
+    You will go into a menu-driven system. Please select [Character
+    devices][Non-standard serial port support], enable the [Moxa
+    SmartIO support] driver with "[*]" for built-in (not "[M]"), then
+    select [Exit] to exit this program.
+
+3.5.5 Rebuild kernel
+--------------------
+
+    The following are for Linux kernel rebuilding, for your
+    reference only.
+
+    For appropriate details, please refer to the Linux document:
+
+        a. Run the following commands::
+
+	     cd /usr/src/linux
+	     make clean		     # take a few minutes
+	     make dep		     # take a few minutes
+	     make bzImage	     # take probably 10-20 minutes
+	     make install	     # copy boot image to correct position
+
+	f. Please make sure the boot kernel (vmlinuz) is in the
+	   correct position.
+	g. If you use 'lilo' utility, you should check /etc/lilo.conf
+	   'image' item specified the path which is the 'vmlinuz' path,
+	   or you will load wrong (or old) boot kernel image (vmlinuz).
+	   After checking /etc/lilo.conf, please run "lilo".
+
+	  Note that if the result of "make bzImage" is ERROR, then you have to
+	  go back to Linux configuration Setup. Type "make menuconfig" in
+          directory /usr/src/linux.
+
+
+3.5.6 Make tty device and special file
+--------------------------------------
+
+    ::
+       # cd /moxa/mxser/driver
+       # ./msmknod
+
+3.5.7 Make utility
+------------------
+
+    ::
+
+	  # cd /moxa/mxser/utility
+	  # make clean; make install
+
+3.5.8 Reboot
+------------
+
+
+
+3.6 Custom configuration
+========================
+
+    Although this driver already provides you default configuration, you
+    still can change the device name and major number. The instruction to
+    change these parameters are shown as below.
+
+a. Change Device name
+
+    If you'd like to use other device names instead of default naming
+    convention, all you have to do is to modify the internal code
+    within the shell script "msmknod". First, you have to open "msmknod"
+    by vi. Locate each line contains "ttyM" and "cum" and change them
+    to the device name you desired. "msmknod" creates the device names
+    you need next time executed.
+
+b. Change Major number
+
+    If major number 30 and 35 had been occupied, you may have to select
+    2 free major numbers for this driver. There are 3 steps to change
+    major numbers.
+
+3.6.1 Find free major numbers
+-----------------------------
+
+    In /proc/devices, you may find all the major numbers occupied
+    in the system. Please select 2 major numbers that are available.
+    e.g. 40, 45.
+
+3.6.2 Create special files
+--------------------------
+
+   Run /moxa/mxser/driver/msmknod to create special files with
+   specified major numbers.
+
+3.6.3 Modify driver with new major number
+-----------------------------------------
+
+   Run vi to open /moxa/mxser/driver/mxser.c. Locate the line
+   contains "MXSERMAJOR". Change the content as below::
+
+	  #define	  MXSERMAJOR		  40
+	  #define	  MXSERCUMAJOR		  45
+
+    3.6.4 Run "make clean; make install" in /moxa/mxser/driver.
+
+3.7 Verify driver installation
+==============================
+
+    You may refer to /var/log/messages to check the latest status
+    log reported by this driver whenever it's activated.
+
+4. Utilities
+^^^^^^^^^^^^
+
+   There are 3 utilities contained in this driver. They are msdiag, msmon and
+   msterm. These 3 utilities are released in form of source code. They should
+   be compiled into executable file and copied into /usr/bin.
+
+   Before using these utilities, please load driver (refer 3.4 & 3.5) and
+   make sure you had run the "msmknod" utility.
+
+msdiag - Diagnostic
+===================
+
+   This utility provides the function to display what Moxa Smartio/Industio
+   board found by driver in the system.
+
+msmon - Port Monitoring
+=======================
+
+   This utility gives the user a quick view about all the MOXA ports'
+   activities. One can easily learn each port's total received/transmitted
+   (Rx/Tx) character count since the time when the monitoring is started.
+
+   Rx/Tx throughputs per second are also reported in interval basis (e.g.
+   the last 5 seconds) and in average basis (since the time the monitoring
+   is started). You can reset all ports' count by <HOME> key. <+> <->
+   (plus/minus) keys to change the displaying time interval. Press <ENTER>
+   on the port, that cursor stay, to view the port's communication
+   parameters, signal status, and input/output queue.
+
+msterm - Terminal Emulation
+===========================
+
+   This utility provides data sending and receiving ability of all tty ports,
+   especially for MOXA ports. It is quite useful for testing simple
+   application, for example, sending AT command to a modem connected to the
+   port or used as a terminal for login purpose. Note that this is only a
+   dumb terminal emulation without handling full screen operation.
+
+5. Setserial
+^^^^^^^^^^^^
+
+   Supported Setserial parameters are listed as below.
+
+   ============== =========================================================
+   uart		  set UART type(16450-->disable FIFO, 16550A-->enable FIFO)
+   close_delay	  set the amount of time(in 1/100 of a second) that DTR
+		  should be kept low while being closed.
+   closing_wait   set the amount of time(in 1/100 of a second) that the
+		  serial port should wait for data to be drained while
+		  being closed, before the receiver is disable.
+   spd_hi	  Use  57.6kb  when  the application requests 38.4kb.
+   spd_vhi	  Use  115.2kb	when  the application requests 38.4kb.
+   spd_shi	  Use  230.4kb	when  the application requests 38.4kb.
+   spd_warp	  Use  460.8kb	when  the application requests 38.4kb.
+   spd_normal	  Use  38.4kb  when  the application requests 38.4kb.
+   spd_cust	  Use  the custom divisor to set the speed when  the
+		  application requests 38.4kb.
+   divisor	  This option set the custom division.
+   baud_base	  This option set the base baud rate.
+   ============== =========================================================
+
+6. Troubleshooting
+^^^^^^^^^^^^^^^^^^
+
+   The boot time error messages and solutions are stated as clearly as
+   possible. If all the possible solutions fail, please contact our technical
+   support team to get more help.
+
+
+   Error msg:
+	      More than 4 Moxa Smartio/Industio family boards found. Fifth board
+              and after are ignored.
+
+   Solution:
+   To avoid this problem, please unplug fifth and after board, because Moxa
+   driver supports up to 4 boards.
+
+   Error msg:
+	      Request_irq fail, IRQ(?) may be conflict with another device.
+
+   Solution:
+   Other PCI or ISA devices occupy the assigned IRQ. If you are not sure
+   which device causes the situation, please check /proc/interrupts to find
+   free IRQ and simply change another free IRQ for Moxa board.
+
+   Error msg:
+	      Board #: C1xx Series(CAP=xxx) interrupt number invalid.
+
+   Solution:
+   Each port within the same multiport board shares the same IRQ. Please set
+   one IRQ (IRQ doesn't equal to zero) for one Moxa board.
+
+   Error msg:
+	      No interrupt vector be set for Moxa ISA board(CAP=xxx).
+
+   Solution:
+   Moxa ISA board needs an interrupt vector.Please refer to user's manual
+   "Hardware Installation" chapter to set interrupt vector.
+
+   Error msg:
+              Couldn't install MOXA Smartio/Industio family driver!
+
+   Solution:
+   Load Moxa driver fail, the major number may conflict with other devices.
+   Please refer to previous section 3.7 to change a free major number for
+   Moxa driver.
+
+   Error msg:
+              Couldn't install MOXA Smartio/Industio family callout driver!
+
+   Solution:
+   Load Moxa callout driver fail, the callout device major number may
+   conflict with other devices. Please refer to previous section 3.7 to
+   change a free callout device major number for Moxa driver.
diff --git a/Documentation/serial/n_gsm.rst b/Documentation/serial/n_gsm.rst
new file mode 100644
index 000000000000..f3ad9fd26408
--- /dev/null
+++ b/Documentation/serial/n_gsm.rst
@@ -0,0 +1,103 @@
+==============================
+GSM 0710 tty multiplexor HOWTO
+==============================
+
+This line discipline implements the GSM 07.10 multiplexing protocol
+detailed in the following 3GPP document:
+
+	http://www.3gpp.org/ftp/Specs/archive/07_series/07.10/0710-720.zip
+
+This document give some hints on how to use this driver with GPRS and 3G
+modems connected to a physical serial port.
+
+How to use it
+-------------
+1. initialize the modem in 0710 mux mode (usually AT+CMUX= command) through
+   its serial port. Depending on the modem used, you can pass more or less
+   parameters to this command,
+2. switch the serial line to using the n_gsm line discipline by using
+   TIOCSETD ioctl,
+3. configure the mux using GSMIOC_GETCONF / GSMIOC_SETCONF ioctl,
+
+Major parts of the initialization program :
+(a good starting point is util-linux-ng/sys-utils/ldattach.c)::
+
+  #include <linux/gsmmux.h>
+  #define N_GSM0710	21	/* GSM 0710 Mux */
+  #define DEFAULT_SPEED	B115200
+  #define SERIAL_PORT	/dev/ttyS0
+
+	int ldisc = N_GSM0710;
+	struct gsm_config c;
+	struct termios configuration;
+
+	/* open the serial port connected to the modem */
+	fd = open(SERIAL_PORT, O_RDWR | O_NOCTTY | O_NDELAY);
+
+	/* configure the serial port : speed, flow control ... */
+
+	/* send the AT commands to switch the modem to CMUX mode
+	   and check that it's successful (should return OK) */
+	write(fd, "AT+CMUX=0\r", 10);
+
+	/* experience showed that some modems need some time before
+	   being able to answer to the first MUX packet so a delay
+	   may be needed here in some case */
+	sleep(3);
+
+	/* use n_gsm line discipline */
+	ioctl(fd, TIOCSETD, &ldisc);
+
+	/* get n_gsm configuration */
+	ioctl(fd, GSMIOC_GETCONF, &c);
+	/* we are initiator and need encoding 0 (basic) */
+	c.initiator = 1;
+	c.encapsulation = 0;
+	/* our modem defaults to a maximum size of 127 bytes */
+	c.mru = 127;
+	c.mtu = 127;
+	/* set the new configuration */
+	ioctl(fd, GSMIOC_SETCONF, &c);
+
+	/* and wait for ever to keep the line discipline enabled */
+	daemon(0,0);
+	pause();
+
+4. create the devices corresponding to the "virtual" serial ports (take care,
+   each modem has its configuration and some DLC have dedicated functions,
+   for example GPS), starting with minor 1 (DLC0 is reserved for the management
+   of the mux)::
+
+     MAJOR=`cat /proc/devices |grep gsmtty | awk '{print $1}`
+     for i in `seq 1 4`; do
+	mknod /dev/ttygsm$i c $MAJOR $i
+     done
+
+5. use these devices as plain serial ports.
+
+   for example, it's possible:
+
+   - and to use gnokii to send / receive SMS on ttygsm1
+   - to use ppp to establish a datalink on ttygsm2
+
+6. first close all virtual ports before closing the physical port.
+
+   Note that after closing the physical port the modem is still in multiplexing
+   mode. This may prevent a successful re-opening of the port later. To avoid
+   this situation either reset the modem if your hardware allows that or send
+   a disconnect command frame manually before initializing the multiplexing mode
+   for the second time. The byte sequence for the disconnect command frame is::
+
+      0xf9, 0x03, 0xef, 0x03, 0xc3, 0x16, 0xf9.
+
+Additional Documentation
+------------------------
+More practical details on the protocol and how it's supported by industrial
+modems can be found in the following documents :
+
+- http://www.telit.com/module/infopool/download.php?id=616
+- http://www.u-blox.com/images/downloads/Product_Docs/LEON-G100-G200-MuxImplementation_ApplicationNote_%28GSM%20G1-CS-10002%29.pdf
+- http://www.sierrawireless.com/Support/Downloads/AirPrime/WMP_Series/~/media/Support_Downloads/AirPrime/Application_notes/CMUX_Feature_Application_Note-Rev004.ashx
+- http://wm.sim.com/sim/News/photo/2010721161442.pdf
+
+11-03-08 - Eric Bénard - <eric@eukrea.com>
diff --git a/Documentation/serial/n_gsm.txt b/Documentation/serial/n_gsm.txt
deleted file mode 100644
index 875361bb7cb4..000000000000
--- a/Documentation/serial/n_gsm.txt
+++ /dev/null
@@ -1,96 +0,0 @@
-n_gsm.c GSM 0710 tty multiplexor HOWTO
-===================================================
-
-This line discipline implements the GSM 07.10 multiplexing protocol
-detailed in the following 3GPP document :
-http://www.3gpp.org/ftp/Specs/archive/07_series/07.10/0710-720.zip
-
-This document give some hints on how to use this driver with GPRS and 3G
-modems connected to a physical serial port.
-
-How to use it
--------------
-1- initialize the modem in 0710 mux mode (usually AT+CMUX= command) through
-its serial port. Depending on the modem used, you can pass more or less
-parameters to this command,
-2- switch the serial line to using the n_gsm line discipline by using
-TIOCSETD ioctl,
-3- configure the mux using GSMIOC_GETCONF / GSMIOC_SETCONF ioctl,
-
-Major parts of the initialization program :
-(a good starting point is util-linux-ng/sys-utils/ldattach.c)
-#include <linux/gsmmux.h>
-#define N_GSM0710	21	/* GSM 0710 Mux */
-#define DEFAULT_SPEED	B115200
-#define SERIAL_PORT	/dev/ttyS0
-
-	int ldisc = N_GSM0710;
-	struct gsm_config c;
-	struct termios configuration;
-
-	/* open the serial port connected to the modem */
-	fd = open(SERIAL_PORT, O_RDWR | O_NOCTTY | O_NDELAY);
-
-	/* configure the serial port : speed, flow control ... */
-
-	/* send the AT commands to switch the modem to CMUX mode
-	   and check that it's successful (should return OK) */
-	write(fd, "AT+CMUX=0\r", 10);
-
-	/* experience showed that some modems need some time before
-	   being able to answer to the first MUX packet so a delay
-	   may be needed here in some case */
-	sleep(3);
-
-	/* use n_gsm line discipline */
-	ioctl(fd, TIOCSETD, &ldisc);
-
-	/* get n_gsm configuration */
-	ioctl(fd, GSMIOC_GETCONF, &c);
-	/* we are initiator and need encoding 0 (basic) */
-	c.initiator = 1;
-	c.encapsulation = 0;
-	/* our modem defaults to a maximum size of 127 bytes */
-	c.mru = 127;
-	c.mtu = 127;
-	/* set the new configuration */
-	ioctl(fd, GSMIOC_SETCONF, &c);
-
-	/* and wait for ever to keep the line discipline enabled */
-	daemon(0,0);
-	pause();
-
-4- create the devices corresponding to the "virtual" serial ports (take care,
-each modem has its configuration and some DLC have dedicated functions,
-for example GPS), starting with minor 1 (DLC0 is reserved for the management
-of the mux)
-
-MAJOR=`cat /proc/devices |grep gsmtty | awk '{print $1}`
-for i in `seq 1 4`; do
-	mknod /dev/ttygsm$i c $MAJOR $i
-done
-
-5- use these devices as plain serial ports.
-for example, it's possible :
-- and to use gnokii to send / receive SMS on ttygsm1
-- to use ppp to establish a datalink on ttygsm2
-
-6- first close all virtual ports before closing the physical port.
-
-Note that after closing the physical port the modem is still in multiplexing
-mode. This may prevent a successful re-opening of the port later. To avoid
-this situation either reset the modem if your hardware allows that or send
-a disconnect command frame manually before initializing the multiplexing mode
-for the second time. The byte sequence for the disconnect command frame is:
-0xf9, 0x03, 0xef, 0x03, 0xc3, 0x16, 0xf9.
-
-Additional Documentation
-------------------------
-More practical details on the protocol and how it's supported by industrial
-modems can be found in the following documents :
-http://www.telit.com/module/infopool/download.php?id=616
-http://www.u-blox.com/images/downloads/Product_Docs/LEON-G100-G200-MuxImplementation_ApplicationNote_%28GSM%20G1-CS-10002%29.pdf
-http://www.sierrawireless.com/Support/Downloads/AirPrime/WMP_Series/~/media/Support_Downloads/AirPrime/Application_notes/CMUX_Feature_Application_Note-Rev004.ashx
-http://wm.sim.com/sim/News/photo/2010721161442.pdf
-
-11-03-08 - Eric Bénard - <eric@eukrea.com>
diff --git a/Documentation/serial/rocket.txt b/Documentation/serial/rocket.rst
similarity index 68%
rename from Documentation/serial/rocket.txt
rename to Documentation/serial/rocket.rst
index 60b039891057..23761eae4282 100644
--- a/Documentation/serial/rocket.txt
+++ b/Documentation/serial/rocket.rst
@@ -1,20 +1,22 @@
-Comtrol(tm) RocketPort(R)/RocketModem(TM) Series 
+================================================
+Comtrol(tm) RocketPort(R)/RocketModem(TM) Series
+================================================
+
 Device Driver for the Linux Operating System
+============================================
 
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
-
-PRODUCT OVERVIEW
+Product overview
 ----------------
 
 This driver provides a loadable kernel driver for the Comtrol RocketPort
-and RocketModem PCI boards. These boards provide, 2, 4, 8, 16, or 32 
+and RocketModem PCI boards. These boards provide, 2, 4, 8, 16, or 32
 high-speed serial ports or modems.  This driver supports up to a combination
 of four RocketPort or RocketModems boards in one machine simultaneously.
 This file assumes that you are using the RocketPort driver which is
-integrated into the kernel sources.  
+integrated into the kernel sources.
 
-The driver can also be installed as an external module using the usual 
-"make;make install" routine.  This external module driver, obtainable 
+The driver can also be installed as an external module using the usual
+"make;make install" routine.  This external module driver, obtainable
 from the Comtrol website listed below, is useful for updating the driver
 or installing it into kernels which do not have the driver configured
 into them.  Installations instructions for the external module
@@ -29,57 +31,59 @@ information on how to set the DIP switches.
 
 You pass the I/O port to the driver using the following module parameters:
 
-board1 :	I/O port for the first ISA board
-board2 :	I/O port for the second ISA board
-board3 :	I/O port for the third ISA board
-board4 :	I/O port for the fourth ISA board
+board1:
+	I/O port for the first ISA board
+board2:
+	I/O port for the second ISA board
+board3:
+	I/O port for the third ISA board
+board4:
+	I/O port for the fourth ISA board
 
 There is a set of utilities and scripts provided with the external driver
-( downloadable from http://www.comtrol.com ) that ease the configuration and
+(downloadable from http://www.comtrol.com) that ease the configuration and
 setup of the ISA cards.
 
 The RocketModem II PCI boards require firmware to be loaded into the card
 before it will function.  The driver has only been tested as a module for this
 board.
 
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
-
-INSTALLATION PROCEDURES
+Installation Procedures
 -----------------------
 
-RocketPort/RocketModem PCI cards require no driver configuration, they are 
+RocketPort/RocketModem PCI cards require no driver configuration, they are
 automatically detected and configured.
 
-The RocketPort driver can be installed as a module (recommended) or built 
+The RocketPort driver can be installed as a module (recommended) or built
 into the kernel. This is selected, as for other drivers, through the `make config`
-command from the root of the Linux source tree during the kernel build process. 
+command from the root of the Linux source tree during the kernel build process.
 
 The RocketPort/RocketModem serial ports installed by this driver are assigned
-device major number 46, and will be named /dev/ttyRx, where x is the port number 
+device major number 46, and will be named /dev/ttyRx, where x is the port number
 starting at zero (ex. /dev/ttyR0, /devttyR1, ...).  If you have multiple cards
 installed in the system, the mapping of port names to serial ports is displayed
 in the system log at /var/log/messages.
 
 If installed as a module, the module must be loaded.  This can be done
 manually by entering "modprobe rocket".  To have the module loaded automatically
-upon system boot, edit a /etc/modprobe.d/*.conf file and add the line
+upon system boot, edit a `/etc/modprobe.d/*.conf` file and add the line
 "alias char-major-46 rocket".
 
 In order to use the ports, their device names (nodes) must be created with mknod.
-This is only required once, the system will retain the names once created.  To 
-create the RocketPort/RocketModem device names, use the command 
-"mknod /dev/ttyRx c 46 x" where x is the port number starting at zero.  For example:
+This is only required once, the system will retain the names once created.  To
+create the RocketPort/RocketModem device names, use the command
+"mknod /dev/ttyRx c 46 x" where x is the port number starting at zero.
 
->mknod /dev/ttyR0 c 46 0
->mknod /dev/ttyR1 c 46 1
->mknod /dev/ttyR2 c 46 2  
+For example::
+
+	> mknod /dev/ttyR0 c 46 0
+	> mknod /dev/ttyR1 c 46 1
+	> mknod /dev/ttyR2 c 46 2
 
 The Linux script MAKEDEV will create the first 16 ttyRx device names (nodes)
-for you:
+for you::
 
->/dev/MAKEDEV ttyR
-
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+	>/dev/MAKEDEV ttyR
 
 ISA Rocketport Boards
 ---------------------
@@ -89,7 +93,7 @@ card before installing and using it.  This is done by setting a set of DIP
 switches on the Rocketport board.
 
 
-SETTING THE I/O ADDRESS
+Setting the I/O address
 -----------------------
 
 Before installing RocketPort(R) or RocketPort RA boards, you must find
@@ -130,40 +134,36 @@ the first 4 bytes of that range are used by the first board.  You would
 need to set the second, third, or fourth board to one of the next available
 blocks such as 0x180.
 
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+RocketPort and RocketPort RA SW1 Settings::
 
-RocketPort and RocketPort RA SW1 Settings:
+            +-------------------------------+
+            | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
+            +-------+-------+---------------+
+            | Unused| Card  | I/O Port Block|
+            +-------------------------------+
 
-          +-------------------------------+
-          | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
-          +-------+-------+---------------+
-          | Unused| Card  | I/O Port Block|
-          +-------------------------------+
+  DIP Switches                             DIP Switches
+  7    8                                   6    5
+  ===================                      ===================
+  On   On   UNUSED, MUST BE ON.            On   On   First Card    <==== Default
+                                           On   Off  Second Card
+                                           Off  On   Third Card
+                                           Off  Off  Fourth Card
 
-DIP Switches                             DIP Switches
-7    8                                   6    5
-===================                      ===================
-On   On   UNUSED, MUST BE ON.            On   On   First Card    <==== Default
-                                         On   Off  Second Card
-                                         Off  On   Third Card
-                                         Off  Off  Fourth Card
+  DIP Switches         I/O Address Range
+  4    3    2    1     Used by the First Card
+  =====================================
+  On   Off  On   Off   100-143
+  On   Off  Off  On    140-183
+  On   Off  Off  Off   180-1C3       <==== Default
+  Off  On   On   Off   200-243
+  Off  On   Off  On    240-283
+  Off  On   Off  Off   280-2C3
+  Off  Off  On   Off   300-343
+  Off  Off  Off  On    340-383
+  Off  Off  Off  Off   380-3C3
 
-DIP Switches         I/O Address Range
-4    3    2    1     Used by the First Card
-=====================================
-On   Off  On   Off   100-143
-On   Off  Off  On    140-183
-On   Off  Off  Off   180-1C3       <==== Default
-Off  On   On   Off   200-243
-Off  On   Off  On    240-283
-Off  On   Off  Off   280-2C3
-Off  Off  On   Off   300-343
-Off  Off  Off  On    340-383
-Off  Off  Off  Off   380-3C3
-
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
-
-REPORTING BUGS
+Reporting Bugs
 --------------
 
 For technical support, please provide the following
@@ -171,19 +171,15 @@ information: Driver version, kernel release, distribution of
 kernel, and type of board you are using. Error messages and log
 printouts port configuration details are especially helpful.
 
-USA
-    Phone: (612) 494-4100
-      FAX: (612) 494-4199
-    email: support@comtrol.com
+USA:
+    :Phone: (612) 494-4100
+    :FAX: (612) 494-4199
+    :email: support@comtrol.com
 
-Comtrol Europe
-    Phone: +44 (0) 1 869 323-220
-      FAX: +44 (0) 1 869 323-211
-    email: support@comtrol.co.uk
+Comtrol Europe:
+    :Phone: +44 (0) 1 869 323-220
+    :FAX: +44 (0) 1 869 323-211
+    :email: support@comtrol.co.uk
 
 Web:	http://www.comtrol.com
 FTP:	ftp.comtrol.com
-
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
-
-
diff --git a/Documentation/serial/serial-iso7816.txt b/Documentation/serial/serial-iso7816.rst
similarity index 85%
rename from Documentation/serial/serial-iso7816.txt
rename to Documentation/serial/serial-iso7816.rst
index 3193d24a2b0f..d990143de0c6 100644
--- a/Documentation/serial/serial-iso7816.txt
+++ b/Documentation/serial/serial-iso7816.rst
@@ -1,11 +1,15 @@
-                        ISO7816 SERIAL COMMUNICATIONS
+=============================
+ISO7816 Serial Communications
+=============================
 
-1. INTRODUCTION
+1. Introduction
+===============
 
   ISO/IEC7816 is a series of standards specifying integrated circuit cards (ICC)
   also known as smart cards.
 
-2. HARDWARE-RELATED CONSIDERATIONS
+2. Hardware-related considerations
+==================================
 
   Some CPUs/UARTs (e.g., Microchip AT91) contain a built-in mode capable of
   handling communication with a smart card.
@@ -15,7 +19,8 @@
   available at user-level to allow switching from one mode to the other, and
   vice versa.
 
-3. DATA STRUCTURES ALREADY AVAILABLE IN THE KERNEL
+3. Data Structures Already Available in the Kernel
+==================================================
 
   The Linux kernel provides the serial_iso7816 structure (see [1]) to handle
   ISO7816 communications. This data structure is used to set and configure
@@ -27,10 +32,11 @@
   to TIOCGISO7816 and TIOCSISO7816 ioctls (see below). The iso7816_config
   callback receives a pointer to struct serial_iso7816.
 
-4. USAGE FROM USER-LEVEL
+4. Usage from user-level
+========================
 
   From user-level, ISO7816 configuration can be get/set using the previous
-  ioctls. For instance, to set ISO7816 you can use the following code:
+  ioctls. For instance, to set ISO7816 you can use the following code::
 
 	#include <linux/serial.h>
 
@@ -78,6 +84,7 @@
 		/* Error handling. See errno. */
 	}
 
-5. REFERENCES
+5. References
+=============
 
  [1]    include/uapi/linux/serial.h
diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.rst
similarity index 89%
rename from Documentation/serial/serial-rs485.txt
rename to Documentation/serial/serial-rs485.rst
index ce0c1a9b8aab..6bc824f948f9 100644
--- a/Documentation/serial/serial-rs485.txt
+++ b/Documentation/serial/serial-rs485.rst
@@ -1,6 +1,9 @@
-                        RS485 SERIAL COMMUNICATIONS
+===========================
+RS485 Serial Communications
+===========================
 
-1. INTRODUCTION
+1. Introduction
+===============
 
    EIA-485, also known as TIA/EIA-485 or RS-485, is a standard defining the
    electrical characteristics of drivers and receivers for use in balanced
@@ -9,7 +12,8 @@
    because it can be used effectively over long distances and in electrically
    noisy environments.
 
-2. HARDWARE-RELATED CONSIDERATIONS
+2. Hardware-related Considerations
+==================================
 
    Some CPUs/UARTs (e.g., Atmel AT91 or 16C950 UART) contain a built-in
    half-duplex mode capable of automatically controlling line direction by
@@ -22,7 +26,8 @@
    available at user-level to allow switching from one mode to the other, and
    vice versa.
 
-3. DATA STRUCTURES ALREADY AVAILABLE IN THE KERNEL
+3. Data Structures Already Available in the Kernel
+==================================================
 
    The Linux kernel provides the serial_rs485 structure (see [1]) to handle
    RS485 communications. This data structure is used to set and configure RS485
@@ -38,10 +43,11 @@
    to TIOCSRS485 and TIOCGRS485 ioctls (see below). The rs485_config callback
    receives a pointer to struct serial_rs485.
 
-4. USAGE FROM USER-LEVEL
+4. Usage from user-level
+========================
 
    From user-level, RS485 configuration can be get/set using the previous
-   ioctls. For instance, to set RS485 you can use the following code:
+   ioctls. For instance, to set RS485 you can use the following code::
 
 	#include <linux/serial.h>
 
@@ -89,7 +95,9 @@
 		/* Error handling. See errno. */
 	}
 
-5. REFERENCES
+5. References
+=============
 
  [1]	include/uapi/linux/serial.h
+
  [2]	Documentation/devicetree/bindings/serial/rs485.txt
diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.rst
similarity index 74%
rename from Documentation/serial/tty.txt
rename to Documentation/serial/tty.rst
index b48780977a68..dd972caacf3e 100644
--- a/Documentation/serial/tty.txt
+++ b/Documentation/serial/tty.rst
@@ -1,5 +1,6 @@
-
-			The Lockronomicon
+=================
+The Lockronomicon
+=================
 
 Your guide to the ancient and twisted locking policies of the tty layer and
 the warped logic behind them. Beware all ye who read on.
@@ -9,12 +10,12 @@ Line Discipline
 ---------------
 
 Line disciplines are registered with tty_register_ldisc() passing the
-discipline number and the ldisc structure. At the point of registration the 
+discipline number and the ldisc structure. At the point of registration the
 discipline must be ready to use and it is possible it will get used before
 the call returns success. If the call returns an error then it won't get
 called. Do not re-use ldisc numbers as they are part of the userspace ABI
 and writing over an existing ldisc will cause demons to eat your computer.
-After the return the ldisc data has been copied so you may free your own 
+After the return the ldisc data has been copied so you may free your own
 copy of the structure. You must not re-register over the top of the line
 discipline even with the same data or your computer again will be eaten by
 demons.
@@ -26,7 +27,7 @@ code manages the module counts this should not usually be a concern.
 
 Heed this warning: the reference count field of the registered copies of the
 tty_ldisc structure in the ldisc table counts the number of lines using this
-discipline. The reference count of the tty_ldisc structure within a tty 
+discipline. The reference count of the tty_ldisc structure within a tty
 counts the number of active users of the ldisc at this instant. In effect it
 counts the number of threads of execution within an ldisc method (plus those
 about to enter and exit although this detail matters not).
@@ -34,9 +35,11 @@ about to enter and exit although this detail matters not).
 Line Discipline Methods
 -----------------------
 
-TTY side interfaces:
+TTY side interfaces
+^^^^^^^^^^^^^^^^^^^
 
-open()		-	Called when the line discipline is attached to
+======================= =======================================================
+open()			Called when the line discipline is attached to
 			the terminal. No other call into the line
 			discipline for this tty will occur until it
 			completes successfully. Should initialize any
@@ -47,66 +50,69 @@ open()		-	Called when the line discipline is attached to
 			Returning an error will prevent the ldisc from
 			being attached. Can sleep.
 
-close()		-	This is called on a terminal when the line
+close()			This is called on a terminal when the line
 			discipline is being unplugged. At the point of
 			execution no further users will enter the
 			ldisc code for this tty. Can sleep.
 
-hangup()	-	Called when the tty line is hung up.
+hangup()		Called when the tty line is hung up.
 			The line discipline should cease I/O to the tty.
 			No further calls into the ldisc code will occur.
 			The return value is ignored. Can sleep.
 
-read()		-	(optional) A process requests reading data from
+read()			(optional) A process requests reading data from
 			the line. Multiple read calls may occur in parallel
 			and the ldisc must deal with serialization issues.
 			If not defined, the process will receive an EIO
 			error. May sleep.
 
-write()		-	(optional) A process requests writing data to the
+write()			(optional) A process requests writing data to the
 			line. Multiple write calls are serialized by the
 			tty layer for the ldisc. If not defined, the
 			process will receive an EIO error. May sleep.
 
-flush_buffer()	-	(optional) May be called at any point between
+flush_buffer()		(optional) May be called at any point between
 			open and close, and instructs the line discipline
 			to empty its input buffer.
 
-set_termios()	-	(optional) Called on termios structure changes.
+set_termios()		(optional) Called on termios structure changes.
 			The caller passes the old termios data and the
 			current data is in the tty. Called under the
 			termios semaphore so allowed to sleep. Serialized
 			against itself only.
 
-poll()		-	(optional) Check the status for the poll/select
+poll()			(optional) Check the status for the poll/select
 			calls. Multiple poll calls may occur in parallel.
 			May sleep.
 
-ioctl()		-	(optional) Called when an ioctl is handed to the
+ioctl()			(optional) Called when an ioctl is handed to the
 			tty layer that might be for the ldisc. Multiple
 			ioctl calls may occur in parallel. May sleep.
 
-compat_ioctl()	-	(optional) Called when a 32 bit ioctl is handed
+compat_ioctl()		(optional) Called when a 32 bit ioctl is handed
 			to the tty layer that might be for the ldisc.
 			Multiple ioctl calls may occur in parallel.
 			May sleep.
+======================= =======================================================
 
-Driver Side Interfaces:
+Driver Side Interfaces
+^^^^^^^^^^^^^^^^^^^^^^
 
-receive_buf()	-	(optional) Called by the low-level driver to hand
+======================= =======================================================
+receive_buf()		(optional) Called by the low-level driver to hand
 			a buffer of received bytes to the ldisc for
 			processing. The number of bytes is guaranteed not
 			to exceed the current value of tty->receive_room.
 			All bytes must be processed.
 
-receive_buf2()	-	(optional) Called by the low-level driver to hand
+receive_buf2()		(optional) Called by the low-level driver to hand
 			a buffer of received bytes to the ldisc for
 			processing. Returns the number of bytes processed.
 
 			If both receive_buf() and receive_buf2() are
 			defined, receive_buf2() should be preferred.
 
-write_wakeup()	-	May be called at any point between open and close.
+write_wakeup()		May be called at any point between open and close.
 			The TTY_DO_WRITE_WAKEUP flag indicates if a call
 			is needed but always races versus calls. Thus the
 			ldisc must be careful about setting order and to
@@ -117,17 +123,20 @@ write_wakeup()	-	May be called at any point between open and close.
 			is permitted to call the driver write method from
 			this function. In such a situation defer it.
 
-dcd_change()	-	Report to the tty line the current DCD pin status
+dcd_change()		Report to the tty line the current DCD pin status
 			changes and the relative timestamp. The timestamp
 			cannot be NULL.
+======================= =======================================================
 
 
 Driver Access
+^^^^^^^^^^^^^
 
 Line discipline methods can call the following methods of the underlying
 hardware driver through the function pointers within the tty->driver
 structure:
 
+======================= =======================================================
 write()			Write a block of characters to the tty device.
 			Returns the number of characters accepted. The
 			character buffer passed to this method is already
@@ -189,13 +198,16 @@ wait_until_sent()	Waits until the device has written out all of the
 			characters in its transmitter FIFO.
 
 send_xchar()		Send a high-priority XON/XOFF character to the device.
+======================= =======================================================
 
 
 Flags
+^^^^^
 
 Line discipline methods have access to tty->flags field containing the
 following interesting flags:
 
+======================= =======================================================
 TTY_THROTTLED		Driver input is throttled. The ldisc should call
 			tty->driver->unthrottle() in order to resume
 			reception when it is ready to process more data.
@@ -212,102 +224,105 @@ TTY_OTHER_CLOSED	Device is a pty and the other side has closed.
 
 TTY_NO_WRITE_SPLIT	Prevent driver from splitting up writes into
 			smaller chunks.
+======================= =======================================================
 
 
 Locking
+^^^^^^^
 
 Callers to the line discipline functions from the tty layer are required to
 take line discipline locks. The same is true of calls from the driver side
 but not yet enforced.
 
-Three calls are now provided
+Three calls are now provided::
 
 	ldisc = tty_ldisc_ref(tty);
 
 takes a handle to the line discipline in the tty and returns it. If no ldisc
 is currently attached or the ldisc is being closed and re-opened at this
 point then NULL is returned. While this handle is held the ldisc will not
-change or go away.
+change or go away::
 
 	tty_ldisc_deref(ldisc)
 
 Returns the ldisc reference and allows the ldisc to be closed. Returning the
 reference takes away your right to call the ldisc functions until you take
-a new reference.
+a new reference::
 
 	ldisc = tty_ldisc_ref_wait(tty);
 
 Performs the same function as tty_ldisc_ref except that it will wait for an
-ldisc change to complete and then return a reference to the new ldisc. 
+ldisc change to complete and then return a reference to the new ldisc.
 
 While these functions are slightly slower than the old code they should have
 minimal impact as most receive logic uses the flip buffers and they only
 need to take a reference when they push bits up through the driver.
 
-A caution: The ldisc->open(), ldisc->close() and driver->set_ldisc 
+A caution: The ldisc->open(), ldisc->close() and driver->set_ldisc
 functions are called with the ldisc unavailable. Thus tty_ldisc_ref will
 fail in this situation if used within these functions. Ldisc and driver
-code calling its own functions must be careful in this case. 
+code calling its own functions must be careful in this case.
 
 
 Driver Interface
 ----------------
 
-open()		-	Called when a device is opened. May sleep
+======================= =======================================================
+open()			Called when a device is opened. May sleep
 
-close()		-	Called when a device is closed. At the point of
-			return from this call the driver must make no 
+close()			Called when a device is closed. At the point of
+			return from this call the driver must make no
 			further ldisc calls of any kind. May sleep
 
-write()		-	Called to write bytes to the device. May not
-			sleep. May occur in parallel in special cases. 
+write()			Called to write bytes to the device. May not
+			sleep. May occur in parallel in special cases.
 			Because this includes panic paths drivers generally
 			shouldn't try and do clever locking here.
 
-put_char()	-	Stuff a single character onto the queue. The
+put_char()		Stuff a single character onto the queue. The
 			driver is guaranteed following up calls to
 			flush_chars.
 
-flush_chars()	-	Ask the kernel to write put_char queue
+flush_chars()		Ask the kernel to write put_char queue
 
-write_room()	-	Return the number of characters that can be stuffed
+write_room()		Return the number of characters that can be stuffed
 			into the port buffers without overflow (or less).
 			The ldisc is responsible for being intelligent
- 			about multi-threading of write_room/write calls
+			about multi-threading of write_room/write calls
 
-ioctl()		-	Called when an ioctl may be for the driver
+ioctl()			Called when an ioctl may be for the driver
 
-set_termios()	-	Called on termios change, serialized against
+set_termios()		Called on termios change, serialized against
 			itself by a semaphore. May sleep.
 
-set_ldisc()	-	Notifier for discipline change. At the point this 
+set_ldisc()		Notifier for discipline change. At the point this
 			is done the discipline is not yet usable. Can now
 			sleep (I think)
 
-throttle()	-	Called by the ldisc to ask the driver to do flow
+throttle()		Called by the ldisc to ask the driver to do flow
 			control.  Serialization including with unthrottle
 			is the job of the ldisc layer.
 
-unthrottle()	-	Called by the ldisc to ask the driver to stop flow
+unthrottle()		Called by the ldisc to ask the driver to stop flow
 			control.
 
-stop()		-	Ldisc notifier to the driver to stop output. As with
+stop()			Ldisc notifier to the driver to stop output. As with
 			throttle the serializations with start() are down
 			to the ldisc layer.
 
-start()		-	Ldisc notifier to the driver to start output.
+start()			Ldisc notifier to the driver to start output.
 
-hangup()	-	Ask the tty driver to cause a hangup initiated
+hangup()		Ask the tty driver to cause a hangup initiated
 			from the host side. [Can sleep ??]
 
-break_ctl()	-	Send RS232 break. Can sleep. Can get called in
+break_ctl()		Send RS232 break. Can sleep. Can get called in
 			parallel, driver must serialize (for now), and
 			with write calls.
 
-wait_until_sent() -	Wait for characters to exit the hardware queue
+wait_until_sent()	Wait for characters to exit the hardware queue
 			of the driver. Can sleep
 
-send_xchar()	  -	Send XON/XOFF and if possible jump the queue with
+send_xchar()	  	Send XON/XOFF and if possible jump the queue with
 			it in order to get fast flow control responses.
 			Cannot sleep ??
-
+======================= =======================================================
diff --git a/MAINTAINERS b/MAINTAINERS
index 8c0cb2aa4c00..7e600004f993 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10512,7 +10512,7 @@ F:	include/uapi/linux/meye.h
 MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD
 M:	Jiri Slaby <jirislaby@gmail.com>
 S:	Maintained
-F:	Documentation/serial/moxa-smartio
+F:	Documentation/serial/moxa-smartio.rst
 F:	drivers/tty/mxser.*
 
 MR800 AVERMEDIA USB FM RADIO DRIVER
@@ -13396,7 +13396,7 @@ ROCKETPORT DRIVER
 P:	Comtrol Corp.
 W:	http://www.comtrol.com
 S:	Maintained
-F:	Documentation/serial/rocket.txt
+F:	Documentation/serial/rocket.rst
 F:	drivers/tty/rocket*
 
 ROCKETPORT EXPRESS/INFINITY DRIVER
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index 9acf8ccdabf6..957db30b9ecb 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -176,7 +176,7 @@ config ROCKETPORT
 	  This driver supports Comtrol RocketPort and RocketModem PCI boards.   
           These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
           modems.  For information about the RocketPort/RocketModem  boards
-          and this driver read <file:Documentation/serial/rocket.txt>.
+          and this driver read <file:Documentation/serial/rocket.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called rocket.
@@ -194,7 +194,7 @@ config CYCLADES
 	  your Linux box, for instance in order to become a dial-in server.
 
 	  For information about the Cyclades-Z card, read
-	  <file:Documentation/serial/README.cycladesZ>.
+	  <file:Documentation/serial/cyclades_z.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called cyclades.
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 2b6376e6e5ad..6e3c66ab0e62 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -1081,7 +1081,7 @@ static int qe_uart_verify_port(struct uart_port *port,
 }
 /* UART operations
  *
- * Details on these functions can be found in Documentation/serial/driver
+ * Details on these functions can be found in Documentation/serial/driver.rst
  */
 static const struct uart_ops qe_uart_pops = {
 	.tx_empty       = qe_uart_tx_empty,
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 5fe2b037e833..fea2216a893f 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -45,7 +45,7 @@ struct device;
 
 /*
  * This structure describes all the operations that can be done on the
- * physical hardware.  See Documentation/serial/driver for details.
+ * physical hardware.  See Documentation/serial/driver.rst for details.
  */
 struct uart_ops {
 	unsigned int	(*tx_empty)(struct uart_port *);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 34/79] docs: target: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (31 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 33/79] docs: serial: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 35/79] docs: timers: " Mauro Carvalho Chehab
                     ` (44 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Martin K. Petersen, linux-scsi, target-devel

Convert the TCM docs to ReST format and add them to the
bookset.

This has a mix of userspace-faced and Kernelspace faced
docs. Still, it sounds a better candidate to be added at
the kernel API set of docs.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/target/index.rst                |  19 ++
 Documentation/target/scripts.rst              |  11 +
 Documentation/target/tcm_mod_builder.rst      | 149 ++++++++++
 Documentation/target/tcm_mod_builder.txt      | 145 ----------
 .../{tcmu-design.txt => tcmu-design.rst}      | 268 ++++++++++--------
 scripts/documentation-file-ref-check          |   2 +-
 6 files changed, 326 insertions(+), 268 deletions(-)
 create mode 100644 Documentation/target/index.rst
 create mode 100644 Documentation/target/scripts.rst
 create mode 100644 Documentation/target/tcm_mod_builder.rst
 delete mode 100644 Documentation/target/tcm_mod_builder.txt
 rename Documentation/target/{tcmu-design.txt => tcmu-design.rst} (69%)

diff --git a/Documentation/target/index.rst b/Documentation/target/index.rst
new file mode 100644
index 000000000000..b68f48982392
--- /dev/null
+++ b/Documentation/target/index.rst
@@ -0,0 +1,19 @@
+:orphan:
+
+==================
+TCM Virtual Device
+==================
+
+.. toctree::
+    :maxdepth: 1
+
+    tcmu-design
+    tcm_mod_builder
+    scripts
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/target/scripts.rst b/Documentation/target/scripts.rst
new file mode 100644
index 000000000000..172d42b522e4
--- /dev/null
+++ b/Documentation/target/scripts.rst
@@ -0,0 +1,11 @@
+TCM mod builder script
+----------------------
+
+.. literalinclude:: tcm_mod_builder.py
+    :language: perl
+
+Target export device script
+---------------------------
+
+.. literalinclude:: target-export-device
+    :language: shell
diff --git a/Documentation/target/tcm_mod_builder.rst b/Documentation/target/tcm_mod_builder.rst
new file mode 100644
index 000000000000..9bfc9822e2bd
--- /dev/null
+++ b/Documentation/target/tcm_mod_builder.rst
@@ -0,0 +1,149 @@
+=========================================
+The TCM v4 fabric module script generator
+=========================================
+
+Greetings all,
+
+This document is intended to be a mini-HOWTO for using the tcm_mod_builder.py
+script to generate a brand new functional TCM v4 fabric .ko module of your very own,
+that once built can be immediately be loaded to start access the new TCM/ConfigFS
+fabric skeleton, by simply using::
+
+	modprobe $TCM_NEW_MOD
+	mkdir -p /sys/kernel/config/target/$TCM_NEW_MOD
+
+This script will create a new drivers/target/$TCM_NEW_MOD/, and will do the following
+
+	1) Generate new API callers for drivers/target/target_core_fabric_configs.c logic
+	   ->make_tpg(), ->drop_tpg(), ->make_wwn(), ->drop_wwn().  These are created
+	   into $TCM_NEW_MOD/$TCM_NEW_MOD_configfs.c
+	2) Generate basic infrastructure for loading/unloading LKMs and TCM/ConfigFS fabric module
+	   using a skeleton struct target_core_fabric_ops API template.
+	3) Based on user defined T10 Proto_Ident for the new fabric module being built,
+	   the TransportID / Initiator and Target WWPN related handlers for
+	   SPC-3 persistent reservation are automatically generated in $TCM_NEW_MOD/$TCM_NEW_MOD_fabric.c
+	   using drivers/target/target_core_fabric_lib.c logic.
+	4) NOP API calls for all other Data I/O path and fabric dependent attribute logic
+	   in $TCM_NEW_MOD/$TCM_NEW_MOD_fabric.c
+
+tcm_mod_builder.py depends upon the mandatory '-p $PROTO_IDENT' and '-m
+$FABRIC_MOD_name' parameters, and actually running the script looks like::
+
+  target:/mnt/sdb/lio-core-2.6.git/Documentation/target# python tcm_mod_builder.py -p iSCSI -m tcm_nab5000
+  tcm_dir: /mnt/sdb/lio-core-2.6.git/Documentation/target/../../
+  Set fabric_mod_name: tcm_nab5000
+  Set fabric_mod_dir:
+  /mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000
+  Using proto_ident: iSCSI
+  Creating fabric_mod_dir:
+  /mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000
+  Writing file:
+  /mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000/tcm_nab5000_base.h
+  Using tcm_mod_scan_fabric_ops:
+  /mnt/sdb/lio-core-2.6.git/Documentation/target/../../include/target/target_core_fabric_ops.h
+  Writing file:
+  /mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000/tcm_nab5000_fabric.c
+  Writing file:
+  /mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000/tcm_nab5000_fabric.h
+  Writing file:
+  /mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000/tcm_nab5000_configfs.c
+  Writing file:
+  /mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000/Kbuild
+  Writing file:
+  /mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000/Kconfig
+  Would you like to add tcm_nab5000to drivers/target/Kbuild..? [yes,no]: yes
+  Would you like to add tcm_nab5000to drivers/target/Kconfig..? [yes,no]: yes
+
+At the end of tcm_mod_builder.py. the script will ask to add the following
+line to drivers/target/Kbuild::
+
+	obj-$(CONFIG_TCM_NAB5000)       += tcm_nab5000/
+
+and the same for drivers/target/Kconfig::
+
+	source "drivers/target/tcm_nab5000/Kconfig"
+
+#) Run 'make menuconfig' and select the new CONFIG_TCM_NAB5000 item::
+
+	<M>   TCM_NAB5000 fabric module
+
+#) Build using 'make modules', once completed you will have::
+
+    target:/mnt/sdb/lio-core-2.6.git# ls -la drivers/target/tcm_nab5000/
+    total 1348
+    drwxr-xr-x 2 root root   4096 2010-10-05 03:23 .
+    drwxr-xr-x 9 root root   4096 2010-10-05 03:22 ..
+    -rw-r--r-- 1 root root    282 2010-10-05 03:22 Kbuild
+    -rw-r--r-- 1 root root    171 2010-10-05 03:22 Kconfig
+    -rw-r--r-- 1 root root     49 2010-10-05 03:23 modules.order
+    -rw-r--r-- 1 root root    738 2010-10-05 03:22 tcm_nab5000_base.h
+    -rw-r--r-- 1 root root   9096 2010-10-05 03:22 tcm_nab5000_configfs.c
+    -rw-r--r-- 1 root root 191200 2010-10-05 03:23 tcm_nab5000_configfs.o
+    -rw-r--r-- 1 root root  40504 2010-10-05 03:23 .tcm_nab5000_configfs.o.cmd
+    -rw-r--r-- 1 root root   5414 2010-10-05 03:22 tcm_nab5000_fabric.c
+    -rw-r--r-- 1 root root   2016 2010-10-05 03:22 tcm_nab5000_fabric.h
+    -rw-r--r-- 1 root root 190932 2010-10-05 03:23 tcm_nab5000_fabric.o
+    -rw-r--r-- 1 root root  40713 2010-10-05 03:23 .tcm_nab5000_fabric.o.cmd
+    -rw-r--r-- 1 root root 401861 2010-10-05 03:23 tcm_nab5000.ko
+    -rw-r--r-- 1 root root    265 2010-10-05 03:23 .tcm_nab5000.ko.cmd
+    -rw-r--r-- 1 root root    459 2010-10-05 03:23 tcm_nab5000.mod.c
+    -rw-r--r-- 1 root root  23896 2010-10-05 03:23 tcm_nab5000.mod.o
+    -rw-r--r-- 1 root root  22655 2010-10-05 03:23 .tcm_nab5000.mod.o.cmd
+    -rw-r--r-- 1 root root 379022 2010-10-05 03:23 tcm_nab5000.o
+    -rw-r--r-- 1 root root    211 2010-10-05 03:23 .tcm_nab5000.o.cmd
+
+#) Load the new module, create a lun_0 configfs group, and add new TCM Core
+   IBLOCK backstore symlink to port::
+
+    target:/mnt/sdb/lio-core-2.6.git# insmod drivers/target/tcm_nab5000.ko
+    target:/mnt/sdb/lio-core-2.6.git# mkdir -p /sys/kernel/config/target/nab5000/iqn.foo/tpgt_1/lun/lun_0
+    target:/mnt/sdb/lio-core-2.6.git# cd /sys/kernel/config/target/nab5000/iqn.foo/tpgt_1/lun/lun_0/
+    target:/sys/kernel/config/target/nab5000/iqn.foo/tpgt_1/lun/lun_0# ln -s /sys/kernel/config/target/core/iblock_0/lvm_test0 nab5000_port
+
+    target:/sys/kernel/config/target/nab5000/iqn.foo/tpgt_1/lun/lun_0# cd -
+    target:/mnt/sdb/lio-core-2.6.git# tree /sys/kernel/config/target/nab5000/
+    /sys/kernel/config/target/nab5000/
+    |-- discovery_auth
+    |-- iqn.foo
+    |   `-- tpgt_1
+    |       |-- acls
+    |       |-- attrib
+    |       |-- lun
+    |       |   `-- lun_0
+    |       |       |-- alua_tg_pt_gp
+    |       |       |-- alua_tg_pt_offline
+    |       |       |-- alua_tg_pt_status
+    |       |       |-- alua_tg_pt_write_md
+    |	|	`-- nab5000_port -> ../../../../../../target/core/iblock_0/lvm_test0
+    |       |-- np
+    |       `-- param
+    `-- version
+
+    target:/mnt/sdb/lio-core-2.6.git# lsmod
+    Module                  Size  Used by
+    tcm_nab5000             3935  4
+    iscsi_target_mod      193211  0
+    target_core_stgt        8090  0
+    target_core_pscsi      11122  1
+    target_core_file        9172  2
+    target_core_iblock      9280  1
+    target_core_mod       228575  31
+    tcm_nab5000,iscsi_target_mod,target_core_stgt,target_core_pscsi,target_core_file,target_core_iblock
+    libfc                  73681  0
+    scsi_debug             56265  0
+    scsi_tgt                8666  1 target_core_stgt
+    configfs               20644  2 target_core_mod
+
+----------------------------------------------------------------------
+
+Future TODO items
+=================
+
+	1) Add more T10 proto_idents
+	2) Make tcm_mod_dump_fabric_ops() smarter and generate function pointer
+	   defs directly from include/target/target_core_fabric_ops.h:struct target_core_fabric_ops
+	   structure members.
+
+October 5th, 2010
+
+Nicholas A. Bellinger <nab@linux-iscsi.org>
diff --git a/Documentation/target/tcm_mod_builder.txt b/Documentation/target/tcm_mod_builder.txt
deleted file mode 100644
index ae22f7005540..000000000000
--- a/Documentation/target/tcm_mod_builder.txt
+++ /dev/null
@@ -1,145 +0,0 @@
->>>>>>>>>> The TCM v4 fabric module script generator <<<<<<<<<<
-
-Greetings all,
-
-This document is intended to be a mini-HOWTO for using the tcm_mod_builder.py
-script to generate a brand new functional TCM v4 fabric .ko module of your very own,
-that once built can be immediately be loaded to start access the new TCM/ConfigFS
-fabric skeleton, by simply using:
-
-	modprobe $TCM_NEW_MOD
-	mkdir -p /sys/kernel/config/target/$TCM_NEW_MOD
-
-This script will create a new drivers/target/$TCM_NEW_MOD/, and will do the following
-
-	*) Generate new API callers for drivers/target/target_core_fabric_configs.c logic
-	   ->make_tpg(), ->drop_tpg(), ->make_wwn(), ->drop_wwn().  These are created
-	   into $TCM_NEW_MOD/$TCM_NEW_MOD_configfs.c
-	*) Generate basic infrastructure for loading/unloading LKMs and TCM/ConfigFS fabric module
-	   using a skeleton struct target_core_fabric_ops API template.
-	*) Based on user defined T10 Proto_Ident for the new fabric module being built,
-	   the TransportID / Initiator and Target WWPN related handlers for
-	   SPC-3 persistent reservation are automatically generated in $TCM_NEW_MOD/$TCM_NEW_MOD_fabric.c
-	   using drivers/target/target_core_fabric_lib.c logic.
-	*) NOP API calls for all other Data I/O path and fabric dependent attribute logic
-	   in $TCM_NEW_MOD/$TCM_NEW_MOD_fabric.c
-
-tcm_mod_builder.py depends upon the mandatory '-p $PROTO_IDENT' and '-m
-$FABRIC_MOD_name' parameters, and actually running the script looks like:
-
-target:/mnt/sdb/lio-core-2.6.git/Documentation/target# python tcm_mod_builder.py -p iSCSI -m tcm_nab5000
-tcm_dir: /mnt/sdb/lio-core-2.6.git/Documentation/target/../../
-Set fabric_mod_name: tcm_nab5000
-Set fabric_mod_dir:
-/mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000
-Using proto_ident: iSCSI
-Creating fabric_mod_dir:
-/mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000
-Writing file:
-/mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000/tcm_nab5000_base.h
-Using tcm_mod_scan_fabric_ops:
-/mnt/sdb/lio-core-2.6.git/Documentation/target/../../include/target/target_core_fabric_ops.h
-Writing file:
-/mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000/tcm_nab5000_fabric.c
-Writing file:
-/mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000/tcm_nab5000_fabric.h
-Writing file:
-/mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000/tcm_nab5000_configfs.c
-Writing file:
-/mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000/Kbuild
-Writing file:
-/mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000/Kconfig
-Would you like to add tcm_nab5000to drivers/target/Kbuild..? [yes,no]: yes
-Would you like to add tcm_nab5000to drivers/target/Kconfig..? [yes,no]: yes
-
-At the end of tcm_mod_builder.py. the script will ask to add the following
-line to drivers/target/Kbuild:
-
-	obj-$(CONFIG_TCM_NAB5000)       += tcm_nab5000/
-
-and the same for drivers/target/Kconfig:
-
-	source "drivers/target/tcm_nab5000/Kconfig"
-
-*) Run 'make menuconfig' and select the new CONFIG_TCM_NAB5000 item:
-
-	<M>   TCM_NAB5000 fabric module
-
-*) Build using 'make modules', once completed you will have:
-
-target:/mnt/sdb/lio-core-2.6.git# ls -la drivers/target/tcm_nab5000/
-total 1348
-drwxr-xr-x 2 root root   4096 2010-10-05 03:23 .
-drwxr-xr-x 9 root root   4096 2010-10-05 03:22 ..
--rw-r--r-- 1 root root    282 2010-10-05 03:22 Kbuild
--rw-r--r-- 1 root root    171 2010-10-05 03:22 Kconfig
--rw-r--r-- 1 root root     49 2010-10-05 03:23 modules.order
--rw-r--r-- 1 root root    738 2010-10-05 03:22 tcm_nab5000_base.h
--rw-r--r-- 1 root root   9096 2010-10-05 03:22 tcm_nab5000_configfs.c
--rw-r--r-- 1 root root 191200 2010-10-05 03:23 tcm_nab5000_configfs.o
--rw-r--r-- 1 root root  40504 2010-10-05 03:23 .tcm_nab5000_configfs.o.cmd
--rw-r--r-- 1 root root   5414 2010-10-05 03:22 tcm_nab5000_fabric.c
--rw-r--r-- 1 root root   2016 2010-10-05 03:22 tcm_nab5000_fabric.h
--rw-r--r-- 1 root root 190932 2010-10-05 03:23 tcm_nab5000_fabric.o
--rw-r--r-- 1 root root  40713 2010-10-05 03:23 .tcm_nab5000_fabric.o.cmd
--rw-r--r-- 1 root root 401861 2010-10-05 03:23 tcm_nab5000.ko
--rw-r--r-- 1 root root    265 2010-10-05 03:23 .tcm_nab5000.ko.cmd
--rw-r--r-- 1 root root    459 2010-10-05 03:23 tcm_nab5000.mod.c
--rw-r--r-- 1 root root  23896 2010-10-05 03:23 tcm_nab5000.mod.o
--rw-r--r-- 1 root root  22655 2010-10-05 03:23 .tcm_nab5000.mod.o.cmd
--rw-r--r-- 1 root root 379022 2010-10-05 03:23 tcm_nab5000.o
--rw-r--r-- 1 root root    211 2010-10-05 03:23 .tcm_nab5000.o.cmd
-
-*) Load the new module, create a lun_0 configfs group, and add new TCM Core
-   IBLOCK backstore symlink to port:
-
-target:/mnt/sdb/lio-core-2.6.git# insmod drivers/target/tcm_nab5000.ko
-target:/mnt/sdb/lio-core-2.6.git# mkdir -p /sys/kernel/config/target/nab5000/iqn.foo/tpgt_1/lun/lun_0
-target:/mnt/sdb/lio-core-2.6.git# cd /sys/kernel/config/target/nab5000/iqn.foo/tpgt_1/lun/lun_0/
-target:/sys/kernel/config/target/nab5000/iqn.foo/tpgt_1/lun/lun_0# ln -s /sys/kernel/config/target/core/iblock_0/lvm_test0 nab5000_port
-
-target:/sys/kernel/config/target/nab5000/iqn.foo/tpgt_1/lun/lun_0# cd -
-target:/mnt/sdb/lio-core-2.6.git# tree /sys/kernel/config/target/nab5000/
-/sys/kernel/config/target/nab5000/
-|-- discovery_auth
-|-- iqn.foo
-|   `-- tpgt_1
-|       |-- acls
-|       |-- attrib
-|       |-- lun
-|       |   `-- lun_0
-|       |       |-- alua_tg_pt_gp
-|       |       |-- alua_tg_pt_offline
-|       |       |-- alua_tg_pt_status
-|       |       |-- alua_tg_pt_write_md
-|	|	`-- nab5000_port -> ../../../../../../target/core/iblock_0/lvm_test0
-|       |-- np
-|       `-- param
-`-- version
-
-target:/mnt/sdb/lio-core-2.6.git# lsmod
-Module                  Size  Used by
-tcm_nab5000             3935  4
-iscsi_target_mod      193211  0
-target_core_stgt        8090  0
-target_core_pscsi      11122  1
-target_core_file        9172  2
-target_core_iblock      9280  1
-target_core_mod       228575  31
-tcm_nab5000,iscsi_target_mod,target_core_stgt,target_core_pscsi,target_core_file,target_core_iblock
-libfc                  73681  0
-scsi_debug             56265  0
-scsi_tgt                8666  1 target_core_stgt
-configfs               20644  2 target_core_mod
-
-----------------------------------------------------------------------
-
-Future TODO items:
-
-	*) Add more T10 proto_idents
-	*) Make tcm_mod_dump_fabric_ops() smarter and generate function pointer
-	   defs directly from include/target/target_core_fabric_ops.h:struct target_core_fabric_ops
-	   structure members.
-
-October 5th, 2010
-Nicholas A. Bellinger <nab@linux-iscsi.org>
diff --git a/Documentation/target/tcmu-design.txt b/Documentation/target/tcmu-design.rst
similarity index 69%
rename from Documentation/target/tcmu-design.txt
rename to Documentation/target/tcmu-design.rst
index 4cebc1ebf99a..a7b426707bf6 100644
--- a/Documentation/target/tcmu-design.txt
+++ b/Documentation/target/tcmu-design.rst
@@ -1,25 +1,30 @@
-Contents:
+====================
+TCM Userspace Design
+====================
+
+
+.. Contents:
 
-1) TCM Userspace Design
-  a) Background
-  b) Benefits
-  c) Design constraints
-  d) Implementation overview
-     i. Mailbox
-     ii. Command ring
-     iii. Data Area
-  e) Device discovery
-  f) Device events
-  g) Other contingencies
-2) Writing a user pass-through handler
-  a) Discovering and configuring TCMU uio devices
-  b) Waiting for events on the device(s)
-  c) Managing the command ring
-3) A final note
+   1) TCM Userspace Design
+     a) Background
+     b) Benefits
+     c) Design constraints
+     d) Implementation overview
+        i. Mailbox
+        ii. Command ring
+        iii. Data Area
+     e) Device discovery
+     f) Device events
+     g) Other contingencies
+   2) Writing a user pass-through handler
+     a) Discovering and configuring TCMU uio devices
+     b) Waiting for events on the device(s)
+     c) Managing the command ring
+   3) A final note
 
 
 TCM Userspace Design
---------------------
+====================
 
 TCM is another name for LIO, an in-kernel iSCSI target (server).
 Existing TCM targets run in the kernel.  TCMU (TCM in Userspace)
@@ -32,7 +37,8 @@ modules for file, block device, RAM or using another SCSI device as
 storage.  These are called "backstores" or "storage engines".  These
 built-in modules are implemented entirely as kernel code.
 
-Background:
+Background
+----------
 
 In addition to modularizing the transport protocol used for carrying
 SCSI commands ("fabrics"), the Linux kernel target, LIO, also modularizes
@@ -60,7 +66,8 @@ kernel, another approach is to create a userspace pass-through
 backstore for LIO, "TCMU".
 
 
-Benefits:
+Benefits
+--------
 
 In addition to allowing relatively easy support for RBD and GLFS, TCMU
 will also allow easier development of new backstores. TCMU combines
@@ -72,21 +79,25 @@ The disadvantage is there are more distinct components to configure, and
 potentially to malfunction. This is unavoidable, but hopefully not
 fatal if we're careful to keep things as simple as possible.
 
-Design constraints:
+Design constraints
+------------------
 
 - Good performance: high throughput, low latency
 - Cleanly handle if userspace:
+
    1) never attaches
    2) hangs
    3) dies
    4) misbehaves
+
 - Allow future flexibility in user & kernel implementations
 - Be reasonably memory-efficient
 - Simple to configure & run
 - Simple to write a userspace backend
 
 
-Implementation overview:
+Implementation overview
+-----------------------
 
 The core of the TCMU interface is a memory region that is shared
 between kernel and userspace. Within this region is: a control area
@@ -108,7 +119,8 @@ the region mapped at a different virtual address.
 
 See target_core_user.h for the struct definitions.
 
-The Mailbox:
+The Mailbox
+-----------
 
 The mailbox is always at the start of the shared memory region, and
 contains a version, details about the starting offset and size of the
@@ -117,19 +129,27 @@ userspace (respectively) to put commands on the ring, and indicate
 when the commands are completed.
 
 version - 1 (userspace should abort if otherwise)
+
 flags:
-- TCMU_MAILBOX_FLAG_CAP_OOOC: indicates out-of-order completion is
-  supported.  See "The Command Ring" for details.
-cmdr_off - The offset of the start of the command ring from the start
-of the memory region, to account for the mailbox size.
-cmdr_size - The size of the command ring. This does *not* need to be a
-power of two.
-cmd_head - Modified by the kernel to indicate when a command has been
-placed on the ring.
-cmd_tail - Modified by userspace to indicate when it has completed
-processing of a command.
+    - TCMU_MAILBOX_FLAG_CAP_OOOC:
+	indicates out-of-order completion is supported.
+	See "The Command Ring" for details.
 
-The Command Ring:
+cmdr_off
+	The offset of the start of the command ring from the start
+	of the memory region, to account for the mailbox size.
+cmdr_size
+	The size of the command ring. This does *not* need to be a
+	power of two.
+cmd_head
+	Modified by the kernel to indicate when a command has been
+	placed on the ring.
+cmd_tail
+	Modified by userspace to indicate when it has completed
+	processing of a command.
+
+The Command Ring
+----------------
 
 Commands are placed on the ring by the kernel incrementing
 mailbox.cmd_head by the size of the command, modulo cmdr_size, and
@@ -180,29 +200,31 @@ opcode it does not handle, it must set UNKNOWN_OP bit (bit 0) in
 hdr.uflags, update cmd_tail, and proceed with processing additional
 commands, if any.
 
-The Data Area:
+The Data Area
+-------------
 
 This is shared-memory space after the command ring. The organization
 of this area is not defined in the TCMU interface, and userspace
 should access only the parts referenced by pending iovs.
 
 
-Device Discovery:
+Device Discovery
+----------------
 
 Other devices may be using UIO besides TCMU. Unrelated user processes
 may also be handling different sets of TCMU devices. TCMU userspace
 processes must find their devices by scanning sysfs
 class/uio/uio*/name. For TCMU devices, these names will be of the
-format:
+format::
 
-tcm-user/<hba_num>/<device_name>/<subtype>/<path>
+	tcm-user/<hba_num>/<device_name>/<subtype>/<path>
 
 where "tcm-user" is common for all TCMU-backed UIO devices. <hba_num>
 and <device_name> allow userspace to find the device's path in the
 kernel target's configfs tree. Assuming the usual mount point, it is
-found at:
+found at::
 
-/sys/kernel/config/target/core/user_<hba_num>/<device_name>
+	/sys/kernel/config/target/core/user_<hba_num>/<device_name>
 
 This location contains attributes such as "hw_block_size", that
 userspace needs to know for correct operation.
@@ -214,15 +236,16 @@ configure the device, if needed. The name cannot contain ':', due to
 LIO limitations.
 
 For all devices so discovered, the user handler opens /dev/uioX and
-calls mmap():
+calls mmap()::
 
-mmap(NULL, size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0)
+	mmap(NULL, size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0)
 
 where size must be equal to the value read from
 /sys/class/uio/uioX/maps/map0/size.
 
 
-Device Events:
+Device Events
+-------------
 
 If a new device is added or removed, a notification will be broadcast
 over netlink, using a generic netlink family name of "TCM-USER" and a
@@ -233,7 +256,8 @@ the LIO device, so that after determining the device is supported
 (based on subtype) it can take the appropriate action.
 
 
-Other contingencies:
+Other contingencies
+-------------------
 
 Userspace handler process never attaches:
 
@@ -258,7 +282,7 @@ Userspace handler process is malicious:
 
 
 Writing a user pass-through handler (with example code)
--------------------------------------------------------
+=======================================================
 
 A user process handing a TCMU device must support the following:
 
@@ -277,103 +301,103 @@ TCMU is designed so that multiple unrelated processes can manage TCMU
 devices separately. All handlers should make sure to only open their
 devices, based opon a known subtype string.
 
-a) Discovering and configuring TCMU UIO devices:
+a) Discovering and configuring TCMU UIO devices::
 
-(error checking omitted for brevity)
+      /* error checking omitted for brevity */
 
-int fd, dev_fd;
-char buf[256];
-unsigned long long map_len;
-void *map;
+      int fd, dev_fd;
+      char buf[256];
+      unsigned long long map_len;
+      void *map;
 
-fd = open("/sys/class/uio/uio0/name", O_RDONLY);
-ret = read(fd, buf, sizeof(buf));
-close(fd);
-buf[ret-1] = '\0'; /* null-terminate and chop off the \n */
+      fd = open("/sys/class/uio/uio0/name", O_RDONLY);
+      ret = read(fd, buf, sizeof(buf));
+      close(fd);
+      buf[ret-1] = '\0'; /* null-terminate and chop off the \n */
 
-/* we only want uio devices whose name is a format we expect */
-if (strncmp(buf, "tcm-user", 8))
+      /* we only want uio devices whose name is a format we expect */
+      if (strncmp(buf, "tcm-user", 8))
 	exit(-1);
 
-/* Further checking for subtype also needed here */
+      /* Further checking for subtype also needed here */
 
-fd = open(/sys/class/uio/%s/maps/map0/size, O_RDONLY);
-ret = read(fd, buf, sizeof(buf));
-close(fd);
-str_buf[ret-1] = '\0'; /* null-terminate and chop off the \n */
+      fd = open(/sys/class/uio/%s/maps/map0/size, O_RDONLY);
+      ret = read(fd, buf, sizeof(buf));
+      close(fd);
+      str_buf[ret-1] = '\0'; /* null-terminate and chop off the \n */
 
-map_len = strtoull(buf, NULL, 0);
+      map_len = strtoull(buf, NULL, 0);
 
-dev_fd = open("/dev/uio0", O_RDWR);
-map = mmap(NULL, map_len, PROT_READ|PROT_WRITE, MAP_SHARED, dev_fd, 0);
+      dev_fd = open("/dev/uio0", O_RDWR);
+      map = mmap(NULL, map_len, PROT_READ|PROT_WRITE, MAP_SHARED, dev_fd, 0);
 
 
-b) Waiting for events on the device(s)
+      b) Waiting for events on the device(s)
 
-while (1) {
-  char buf[4];
+      while (1) {
+        char buf[4];
 
-  int ret = read(dev_fd, buf, 4); /* will block */
+        int ret = read(dev_fd, buf, 4); /* will block */
 
-  handle_device_events(dev_fd, map);
-}
-
-
-c) Managing the command ring
-
-#include <linux/target_core_user.h>
-
-int handle_device_events(int fd, void *map)
-{
-  struct tcmu_mailbox *mb = map;
-  struct tcmu_cmd_entry *ent = (void *) mb + mb->cmdr_off + mb->cmd_tail;
-  int did_some_work = 0;
-
-  /* Process events from cmd ring until we catch up with cmd_head */
-  while (ent != (void *)mb + mb->cmdr_off + mb->cmd_head) {
-
-    if (tcmu_hdr_get_op(ent->hdr.len_op) == TCMU_OP_CMD) {
-      uint8_t *cdb = (void *)mb + ent->req.cdb_off;
-      bool success = true;
+        handle_device_events(dev_fd, map);
+      }
 
-      /* Handle command here. */
-      printf("SCSI opcode: 0x%x\n", cdb[0]);
 
-      /* Set response fields */
-      if (success)
-        ent->rsp.scsi_status = SCSI_NO_SENSE;
-      else {
-        /* Also fill in rsp->sense_buffer here */
-        ent->rsp.scsi_status = SCSI_CHECK_CONDITION;
+c) Managing the command ring::
+
+      #include <linux/target_core_user.h>
+
+      int handle_device_events(int fd, void *map)
+      {
+        struct tcmu_mailbox *mb = map;
+        struct tcmu_cmd_entry *ent = (void *) mb + mb->cmdr_off + mb->cmd_tail;
+        int did_some_work = 0;
+
+        /* Process events from cmd ring until we catch up with cmd_head */
+        while (ent != (void *)mb + mb->cmdr_off + mb->cmd_head) {
+
+          if (tcmu_hdr_get_op(ent->hdr.len_op) == TCMU_OP_CMD) {
+            uint8_t *cdb = (void *)mb + ent->req.cdb_off;
+            bool success = true;
+
+            /* Handle command here. */
+            printf("SCSI opcode: 0x%x\n", cdb[0]);
+
+            /* Set response fields */
+            if (success)
+              ent->rsp.scsi_status = SCSI_NO_SENSE;
+            else {
+              /* Also fill in rsp->sense_buffer here */
+              ent->rsp.scsi_status = SCSI_CHECK_CONDITION;
+            }
+          }
+          else if (tcmu_hdr_get_op(ent->hdr.len_op) != TCMU_OP_PAD) {
+            /* Tell the kernel we didn't handle unknown opcodes */
+            ent->hdr.uflags |= TCMU_UFLAG_UNKNOWN_OP;
+          }
+          else {
+            /* Do nothing for PAD entries except update cmd_tail */
+          }
+
+          /* update cmd_tail */
+          mb->cmd_tail = (mb->cmd_tail + tcmu_hdr_get_len(&ent->hdr)) % mb->cmdr_size;
+          ent = (void *) mb + mb->cmdr_off + mb->cmd_tail;
+          did_some_work = 1;
+        }
+
+        /* Notify the kernel that work has been finished */
+        if (did_some_work) {
+          uint32_t buf = 0;
+
+          write(fd, &buf, 4);
+        }
+
+        return 0;
       }
-    }
-    else if (tcmu_hdr_get_op(ent->hdr.len_op) != TCMU_OP_PAD) {
-      /* Tell the kernel we didn't handle unknown opcodes */
-      ent->hdr.uflags |= TCMU_UFLAG_UNKNOWN_OP;
-    }
-    else {
-      /* Do nothing for PAD entries except update cmd_tail */
-    }
-
-    /* update cmd_tail */
-    mb->cmd_tail = (mb->cmd_tail + tcmu_hdr_get_len(&ent->hdr)) % mb->cmdr_size;
-    ent = (void *) mb + mb->cmdr_off + mb->cmd_tail;
-    did_some_work = 1;
-  }
-
-  /* Notify the kernel that work has been finished */
-  if (did_some_work) {
-    uint32_t buf = 0;
-
-    write(fd, &buf, 4);
-  }
-
-  return 0;
-}
 
 
 A final note
-------------
+============
 
 Please be careful to return codes as defined by the SCSI
 specifications. These are different than some values defined in the
diff --git a/scripts/documentation-file-ref-check b/scripts/documentation-file-ref-check
index bd7d9ab63941..f47ef26754fa 100755
--- a/scripts/documentation-file-ref-check
+++ b/scripts/documentation-file-ref-check
@@ -81,7 +81,7 @@ while (<IN>) {
 		# Remove sched-pelt false-positive
 		next if ($fulref =~ m,^Documentation/scheduler/sched-pelt$,);
 
-		# Discard some build examples from Documentation/target/tcm_mod_builder.txt
+		# Discard some build examples from Documentation/target/tcm_mod_builder.rst
 		next if ($fulref =~ m,mnt/sdb/lio-core-2.6.git/Documentation/target,);
 
 		# Check if exists, evaluating wildcards
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 35/79] docs: timers: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (32 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 34/79] docs: target: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 36/79] docs: watchdog: " Mauro Carvalho Chehab
                     ` (43 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Thomas Gleixner, Clemens Ladisch,
	Antti Palosaari, Liam Girdwood, Mark Brown, Andy Whitcroft,
	Joe Perches

The conversion here is really trivial: just a bunch of title
markups and very few puntual changes is enough to make it to
be parsed by Sphinx and generate a nice html.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../timers/{highres.txt => highres.rst}       | 13 +++---
 Documentation/timers/{hpet.txt => hpet.rst}   |  4 +-
 .../timers/{hrtimers.txt => hrtimers.rst}     |  6 +--
 Documentation/timers/index.rst                | 22 ++++++++++
 Documentation/timers/{NO_HZ.txt => no_hz.rst} | 40 +++++++++++--------
 .../{timekeeping.txt => timekeeping.rst}      |  3 +-
 .../{timers-howto.txt => timers-howto.rst}    | 15 +++++--
 MAINTAINERS                                   |  2 +-
 drivers/media/usb/dvb-usb-v2/anysee.c         |  2 +-
 drivers/regulator/core.c                      |  2 +-
 include/linux/iopoll.h                        |  4 +-
 include/linux/regmap.h                        |  4 +-
 scripts/checkpatch.pl                         |  8 ++--
 13 files changed, 83 insertions(+), 42 deletions(-)
 rename Documentation/timers/{highres.txt => highres.rst} (98%)
 rename Documentation/timers/{hpet.txt => hpet.rst} (91%)
 rename Documentation/timers/{hrtimers.txt => hrtimers.rst} (98%)
 create mode 100644 Documentation/timers/index.rst
 rename Documentation/timers/{NO_HZ.txt => no_hz.rst} (93%)
 rename Documentation/timers/{timekeeping.txt => timekeeping.rst} (98%)
 rename Documentation/timers/{timers-howto.txt => timers-howto.rst} (93%)

diff --git a/Documentation/timers/highres.txt b/Documentation/timers/highres.rst
similarity index 98%
rename from Documentation/timers/highres.txt
rename to Documentation/timers/highres.rst
index 8f9741592123..bde5eb7e5c9e 100644
--- a/Documentation/timers/highres.txt
+++ b/Documentation/timers/highres.rst
@@ -1,5 +1,6 @@
+=====================================================
 High resolution timers and dynamic ticks design notes
------------------------------------------------------
+=====================================================
 
 Further information can be found in the paper of the OLS 2006 talk "hrtimers
 and beyond". The paper is part of the OLS 2006 Proceedings Volume 1, which can
@@ -30,11 +31,12 @@ hrtimer base infrastructure
 ---------------------------
 
 The hrtimer base infrastructure was merged into the 2.6.16 kernel. Details of
-the base implementation are covered in Documentation/timers/hrtimers.txt. See
+the base implementation are covered in Documentation/timers/hrtimers.rst. See
 also figure #2 (OLS slides p. 15)
 
 The main differences to the timer wheel, which holds the armed timer_list type
 timers are:
+
        - time ordered enqueueing into a rb-tree
        - independent of ticks (the processing is based on nanoseconds)
 
@@ -55,7 +57,8 @@ merged into the 2.6.18 kernel.
 
 Further information about the Generic Time Of Day framework is available in the
 OLS 2005 Proceedings Volume 1:
-http://www.linuxsymposium.org/2005/linuxsymposium_procv1.pdf
+
+	http://www.linuxsymposium.org/2005/linuxsymposium_procv1.pdf
 
 The paper "We Are Not Getting Any Younger: A New Approach to Time and
 Timers" was written by J. Stultz, D.V. Hart, & N. Aravamudan.
@@ -100,6 +103,7 @@ accounting, profiling, and high resolution timers.
 
 The management layer assigns one or more of the following functions to a clock
 event device:
+
       - system global periodic tick (jiffies update)
       - cpu local update_process_times
       - cpu local profiling
@@ -244,6 +248,3 @@ extended to x86_64 and ARM already. Initial (work in progress) support is also
 available for MIPS and PowerPC.
 
 	  Thomas, Ingo
-
-
-
diff --git a/Documentation/timers/hpet.txt b/Documentation/timers/hpet.rst
similarity index 91%
rename from Documentation/timers/hpet.txt
rename to Documentation/timers/hpet.rst
index 895345ec513b..c9d05d3caaca 100644
--- a/Documentation/timers/hpet.txt
+++ b/Documentation/timers/hpet.rst
@@ -1,4 +1,6 @@
-		High Precision Event Timer Driver for Linux
+===========================================
+High Precision Event Timer Driver for Linux
+===========================================
 
 The High Precision Event Timer (HPET) hardware follows a specification
 by Intel and Microsoft, revision 1.
diff --git a/Documentation/timers/hrtimers.txt b/Documentation/timers/hrtimers.rst
similarity index 98%
rename from Documentation/timers/hrtimers.txt
rename to Documentation/timers/hrtimers.rst
index 588d85724f10..c1c20a693e8f 100644
--- a/Documentation/timers/hrtimers.txt
+++ b/Documentation/timers/hrtimers.rst
@@ -1,6 +1,6 @@
-
+======================================================
 hrtimers - subsystem for high-resolution kernel timers
-----------------------------------------------------
+======================================================
 
 This patch introduces a new subsystem for high-resolution kernel timers.
 
@@ -146,7 +146,7 @@ the clock_getres() interface. This will return whatever real resolution
 a given clock has - be it low-res, high-res, or artificially-low-res.
 
 hrtimers - testing and verification
-----------------------------------
+-----------------------------------
 
 We used the high-resolution clock subsystem ontop of hrtimers to verify
 the hrtimer implementation details in praxis, and we also ran the posix
diff --git a/Documentation/timers/index.rst b/Documentation/timers/index.rst
new file mode 100644
index 000000000000..91f6f8263c48
--- /dev/null
+++ b/Documentation/timers/index.rst
@@ -0,0 +1,22 @@
+:orphan:
+
+======
+timers
+======
+
+.. toctree::
+    :maxdepth: 1
+
+    highres
+    hpet
+    hrtimers
+    no_hz
+    timekeeping
+    timers-howto
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/timers/NO_HZ.txt b/Documentation/timers/no_hz.rst
similarity index 93%
rename from Documentation/timers/NO_HZ.txt
rename to Documentation/timers/no_hz.rst
index 9591092da5e0..065db217cb04 100644
--- a/Documentation/timers/NO_HZ.txt
+++ b/Documentation/timers/no_hz.rst
@@ -1,4 +1,6 @@
-		NO_HZ: Reducing Scheduling-Clock Ticks
+======================================
+NO_HZ: Reducing Scheduling-Clock Ticks
+======================================
 
 
 This document describes Kconfig options and boot parameters that can
@@ -28,7 +30,8 @@ by a third section on RCU-specific considerations, a fourth section
 discussing testing, and a fifth and final section listing known issues.
 
 
-NEVER OMIT SCHEDULING-CLOCK TICKS
+Never Omit Scheduling-Clock Ticks
+=================================
 
 Very old versions of Linux from the 1990s and the very early 2000s
 are incapable of omitting scheduling-clock ticks.  It turns out that
@@ -59,7 +62,8 @@ degrade your applications performance.  If this describes your workload,
 you should read the following two sections.
 
 
-OMIT SCHEDULING-CLOCK TICKS FOR IDLE CPUs
+Omit Scheduling-Clock Ticks For Idle CPUs
+=========================================
 
 If a CPU is idle, there is little point in sending it a scheduling-clock
 interrupt.  After all, the primary purpose of a scheduling-clock interrupt
@@ -97,7 +101,8 @@ By default, CONFIG_NO_HZ_IDLE=y kernels boot with "nohz=on", enabling
 dyntick-idle mode.
 
 
-OMIT SCHEDULING-CLOCK TICKS FOR CPUs WITH ONLY ONE RUNNABLE TASK
+Omit Scheduling-Clock Ticks For CPUs With Only One Runnable Task
+================================================================
 
 If a CPU has only one runnable task, there is little point in sending it
 a scheduling-clock interrupt because there is no other task to switch to.
@@ -174,7 +179,8 @@ However, the drawbacks listed above mean that adaptive ticks should not
 (yet) be enabled by default.
 
 
-RCU IMPLICATIONS
+RCU Implications
+================
 
 There are situations in which idle CPUs cannot be permitted to
 enter either dyntick-idle mode or adaptive-tick mode, the most
@@ -199,7 +205,8 @@ scheduler will decide where to run them, which might or might not be
 where you want them to run.
 
 
-TESTING
+Testing
+=======
 
 So you enable all the OS-jitter features described in this document,
 but do not see any change in your workload's behavior.  Is this because
@@ -222,9 +229,10 @@ We do not currently have a good way to remove OS jitter from single-CPU
 systems.
 
 
-KNOWN ISSUES
+Known Issues
+============
 
-o	Dyntick-idle slows transitions to and from idle slightly.
+*	Dyntick-idle slows transitions to and from idle slightly.
 	In practice, this has not been a problem except for the most
 	aggressive real-time workloads, which have the option of disabling
 	dyntick-idle mode, an option that most of them take.  However,
@@ -248,13 +256,13 @@ o	Dyntick-idle slows transitions to and from idle slightly.
 		this parameter effectively disables Turbo Mode on Intel
 		CPUs, which can significantly reduce maximum performance.
 
-o	Adaptive-ticks slows user/kernel transitions slightly.
+*	Adaptive-ticks slows user/kernel transitions slightly.
 	This is not expected to be a problem for computationally intensive
 	workloads, which have few such transitions.  Careful benchmarking
 	will be required to determine whether or not other workloads
 	are significantly affected by this effect.
 
-o	Adaptive-ticks does not do anything unless there is only one
+*	Adaptive-ticks does not do anything unless there is only one
 	runnable task for a given CPU, even though there are a number
 	of other situations where the scheduling-clock tick is not
 	needed.  To give but one example, consider a CPU that has one
@@ -275,7 +283,7 @@ o	Adaptive-ticks does not do anything unless there is only one
 
 	Better handling of these sorts of situations is future work.
 
-o	A reboot is required to reconfigure both adaptive idle and RCU
+*	A reboot is required to reconfigure both adaptive idle and RCU
 	callback offloading.  Runtime reconfiguration could be provided
 	if needed, however, due to the complexity of reconfiguring RCU at
 	runtime, there would need to be an earthshakingly good reason.
@@ -283,12 +291,12 @@ o	A reboot is required to reconfigure both adaptive idle and RCU
 	simply offloading RCU callbacks from all CPUs and pinning them
 	where you want them whenever you want them pinned.
 
-o	Additional configuration is required to deal with other sources
+*	Additional configuration is required to deal with other sources
 	of OS jitter, including interrupts and system-utility tasks
 	and processes.  This configuration normally involves binding
 	interrupts and tasks to particular CPUs.
 
-o	Some sources of OS jitter can currently be eliminated only by
+*	Some sources of OS jitter can currently be eliminated only by
 	constraining the workload.  For example, the only way to eliminate
 	OS jitter due to global TLB shootdowns is to avoid the unmapping
 	operations (such as kernel module unload operations) that
@@ -299,17 +307,17 @@ o	Some sources of OS jitter can currently be eliminated only by
 	helpful, especially when combined with the mlock() and mlockall()
 	system calls.
 
-o	Unless all CPUs are idle, at least one CPU must keep the
+*	Unless all CPUs are idle, at least one CPU must keep the
 	scheduling-clock interrupt going in order to support accurate
 	timekeeping.
 
-o	If there might potentially be some adaptive-ticks CPUs, there
+*	If there might potentially be some adaptive-ticks CPUs, there
 	will be at least one CPU keeping the scheduling-clock interrupt
 	going, even if all CPUs are otherwise idle.
 
 	Better handling of this situation is ongoing work.
 
-o	Some process-handling operations still require the occasional
+*	Some process-handling operations still require the occasional
 	scheduling-clock tick.	These operations include calculating CPU
 	load, maintaining sched average, computing CFS entity vruntime,
 	computing avenrun, and carrying out load balancing.  They are
diff --git a/Documentation/timers/timekeeping.txt b/Documentation/timers/timekeeping.rst
similarity index 98%
rename from Documentation/timers/timekeeping.txt
rename to Documentation/timers/timekeeping.rst
index 2d1732b0a868..f83e98852e2c 100644
--- a/Documentation/timers/timekeeping.txt
+++ b/Documentation/timers/timekeeping.rst
@@ -1,5 +1,6 @@
+===========================================================
 Clock sources, Clock events, sched_clock() and delay timers
------------------------------------------------------------
+===========================================================
 
 This document tries to briefly explain some basic kernel timekeeping
 abstractions. It partly pertains to the drivers usually found in
diff --git a/Documentation/timers/timers-howto.txt b/Documentation/timers/timers-howto.rst
similarity index 93%
rename from Documentation/timers/timers-howto.txt
rename to Documentation/timers/timers-howto.rst
index 038f8c77a076..7e3167bec2b1 100644
--- a/Documentation/timers/timers-howto.txt
+++ b/Documentation/timers/timers-howto.rst
@@ -1,5 +1,6 @@
+===================================================================
 delays - Information on the various kernel delay / sleep mechanisms
--------------------------------------------------------------------
+===================================================================
 
 This document seeks to answer the common question: "What is the
 RightWay (TM) to insert a delay?"
@@ -17,7 +18,7 @@ code in an atomic context?"  This should be followed closely by "Does
 it really need to delay in atomic context?" If so...
 
 ATOMIC CONTEXT:
-	You must use the *delay family of functions. These
+	You must use the `*delay` family of functions. These
 	functions use the jiffie estimation of clock speed
 	and will busy wait for enough loop cycles to achieve
 	the desired delay:
@@ -35,21 +36,26 @@ ATOMIC CONTEXT:
 	be refactored to allow for the use of msleep.
 
 NON-ATOMIC CONTEXT:
-	You should use the *sleep[_range] family of functions.
+	You should use the `*sleep[_range]` family of functions.
 	There are a few more options here, while any of them may
 	work correctly, using the "right" sleep function will
 	help the scheduler, power management, and just make your
 	driver better :)
 
 	-- Backed by busy-wait loop:
+
 		udelay(unsigned long usecs)
+
 	-- Backed by hrtimers:
+
 		usleep_range(unsigned long min, unsigned long max)
+
 	-- Backed by jiffies / legacy_timers
+
 		msleep(unsigned long msecs)
 		msleep_interruptible(unsigned long msecs)
 
-	Unlike the *delay family, the underlying mechanism
+	Unlike the `*delay` family, the underlying mechanism
 	driving each of these calls varies, thus there are
 	quirks you should be aware of.
 
@@ -70,6 +76,7 @@ NON-ATOMIC CONTEXT:
 		- Why not msleep for (1ms - 20ms)?
 			Explained originally here:
 				http://lkml.org/lkml/2007/8/3/250
+
 			msleep(1~20) may not do what the caller intends, and
 			will often sleep longer (~20 ms actual sleep for any
 			value given in the 1~20ms range). In many cases this
diff --git a/MAINTAINERS b/MAINTAINERS
index 7e600004f993..8dfa2fa5101a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7127,7 +7127,7 @@ F:	drivers/net/ethernet/hp/hp100.*
 HPET:	High Precision Event Timers driver
 M:	Clemens Ladisch <clemens@ladisch.de>
 S:	Maintained
-F:	Documentation/timers/hpet.txt
+F:	Documentation/timers/hpet.rst
 F:	drivers/char/hpet.c
 F:	include/linux/hpet.h
 F:	include/uapi/linux/hpet.h
diff --git a/drivers/media/usb/dvb-usb-v2/anysee.c b/drivers/media/usb/dvb-usb-v2/anysee.c
index 0df7ad69e6c7..a4271f6c414a 100644
--- a/drivers/media/usb/dvb-usb-v2/anysee.c
+++ b/drivers/media/usb/dvb-usb-v2/anysee.c
@@ -65,7 +65,7 @@ static int anysee_ctrl_msg(struct dvb_usb_device *d,
 	/* TODO FIXME: dvb_usb_generic_rw() fails rarely with error code -32
 	 * (EPIPE, Broken pipe). Function supports currently msleep() as a
 	 * parameter but I would not like to use it, since according to
-	 * Documentation/timers/timers-howto.txt it should not be used such
+	 * Documentation/timers/timers-howto.rst it should not be used such
 	 * short, under < 20ms, sleeps. Repeating failed message would be
 	 * better choice as not to add unwanted delays...
 	 * Fixing that correctly is one of those or both;
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 186a37675b50..e67a98115d9d 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2308,7 +2308,7 @@ static int regulator_ena_gpio_ctrl(struct regulator_dev *rdev, bool enable)
  *
  * Delay for the requested amount of time as per the guidelines in:
  *
- *     Documentation/timers/timers-howto.txt
+ *     Documentation/timers/timers-howto.rst
  *
  * The assumption here is that regulators will never be enabled in
  * atomic context and therefore sleeping functions can be used.
diff --git a/include/linux/iopoll.h b/include/linux/iopoll.h
index b1d861caca16..320bbc9761c8 100644
--- a/include/linux/iopoll.h
+++ b/include/linux/iopoll.h
@@ -30,7 +30,7 @@
  * @cond: Break condition (usually involving @val)
  * @sleep_us: Maximum time to sleep between reads in us (0
  *            tight-loops).  Should be less than ~20ms since usleep_range
- *            is used (see Documentation/timers/timers-howto.txt).
+ *            is used (see Documentation/timers/timers-howto.rst).
  * @timeout_us: Timeout in us, 0 means never timeout
  *
  * Returns 0 on success and -ETIMEDOUT upon a timeout. In either
@@ -69,7 +69,7 @@
  * @cond: Break condition (usually involving @val)
  * @delay_us: Time to udelay between reads in us (0 tight-loops).  Should
  *            be less than ~10us since udelay is used (see
- *            Documentation/timers/timers-howto.txt).
+ *            Documentation/timers/timers-howto.rst).
  * @timeout_us: Timeout in us, 0 means never timeout
  *
  * Returns 0 on success and -ETIMEDOUT upon a timeout. In either
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index daeec7dbd65c..ed5e9d0a1285 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -112,7 +112,7 @@ struct reg_sequence {
  * @cond: Break condition (usually involving @val)
  * @sleep_us: Maximum time to sleep between reads in us (0
  *            tight-loops).  Should be less than ~20ms since usleep_range
- *            is used (see Documentation/timers/timers-howto.txt).
+ *            is used (see Documentation/timers/timers-howto.rst).
  * @timeout_us: Timeout in us, 0 means never timeout
  *
  * Returns 0 on success and -ETIMEDOUT upon a timeout or the regmap_read
@@ -154,7 +154,7 @@ struct reg_sequence {
  * @cond: Break condition (usually involving @val)
  * @sleep_us: Maximum time to sleep between reads in us (0
  *            tight-loops).  Should be less than ~20ms since usleep_range
- *            is used (see Documentation/timers/timers-howto.txt).
+ *            is used (see Documentation/timers/timers-howto.rst).
  * @timeout_us: Timeout in us, 0 means never timeout
  *
  * Returns 0 on success and -ETIMEDOUT upon a timeout or the regmap_field_read
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 1c421ac42b07..d36598bbf1b0 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -5714,7 +5714,7 @@ sub process {
 			# ignore udelay's < 10, however
 			if (! ($delay < 10) ) {
 				CHK("USLEEP_RANGE",
-				    "usleep_range is preferred over udelay; see Documentation/timers/timers-howto.txt\n" . $herecurr);
+				    "usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst\n" . $herecurr);
 			}
 			if ($delay > 2000) {
 				WARN("LONG_UDELAY",
@@ -5726,7 +5726,7 @@ sub process {
 		if ($line =~ /\bmsleep\s*\((\d+)\);/) {
 			if ($1 < 20) {
 				WARN("MSLEEP",
-				     "msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt\n" . $herecurr);
+				     "msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.rst\n" . $herecurr);
 			}
 		}
 
@@ -6117,11 +6117,11 @@ sub process {
 			my $max = $7;
 			if ($min eq $max) {
 				WARN("USLEEP_RANGE",
-				     "usleep_range should not use min == max args; see Documentation/timers/timers-howto.txt\n" . "$here\n$stat\n");
+				     "usleep_range should not use min == max args; see Documentation/timers/timers-howto.rst\n" . "$here\n$stat\n");
 			} elsif ($min =~ /^\d+$/ && $max =~ /^\d+$/ &&
 				 $min > $max) {
 				WARN("USLEEP_RANGE",
-				     "usleep_range args reversed, use min then max; see Documentation/timers/timers-howto.txt\n" . "$here\n$stat\n");
+				     "usleep_range args reversed, use min then max; see Documentation/timers/timers-howto.rst\n" . "$here\n$stat\n");
 			}
 		}
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 36/79] docs: watchdog: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (33 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 35/79] docs: timers: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 37/79] docs: xilinx: convert eemi.txt to eemi.rst Mauro Carvalho Chehab
                     ` (42 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Wim Van Sebroeck, Guenter Roeck, Jerry Hoemann,
	linux-watchdog

To: Linux Doc Mailing List <linux-doc@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>, linux-kernel@vger.kernel.org, Jonathan Corbet <corbet@lwn.net>

Convert those documents and prepare them to be part of the kernel
API book, as most of the stuff there are related to the
Kernel interfaces.

Still, in the future, it would make sense to split the docs,
as some of the stuff is clearly focused on sysadmin tasks.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../admin-guide/kernel-parameters.txt         |   2 +-
 Documentation/kernel-per-CPU-kthreads.txt     |   2 +-
 ....txt => convert_drivers_to_kernel_api.rst} | 109 +--
 .../watchdog/{hpwdt.txt => hpwdt.rst}         |  25 +-
 Documentation/watchdog/index.rst              |  25 +
 .../watchdog/{mlx-wdt.txt => mlx-wdt.rst}     |  24 +-
 .../{pcwd-watchdog.txt => pcwd-watchdog.rst}  |  13 +-
 .../{watchdog-api.txt => watchdog-api.rst}    |  76 +-
 ...kernel-api.txt => watchdog-kernel-api.rst} |  91 ++-
 .../watchdog/watchdog-parameters.rst          | 736 ++++++++++++++++++
 .../watchdog/watchdog-parameters.txt          | 410 ----------
 .../{watchdog-pm.txt => watchdog-pm.rst}      |   3 +
 Documentation/watchdog/{wdt.txt => wdt.rst}   |  31 +-
 MAINTAINERS                                   |   2 +-
 drivers/watchdog/Kconfig                      |   6 +-
 drivers/watchdog/smsc37b787_wdt.c             |   2 +-
 16 files changed, 1004 insertions(+), 553 deletions(-)
 rename Documentation/watchdog/{convert_drivers_to_kernel_api.txt => convert_drivers_to_kernel_api.rst} (75%)
 rename Documentation/watchdog/{hpwdt.txt => hpwdt.rst} (79%)
 create mode 100644 Documentation/watchdog/index.rst
 rename Documentation/watchdog/{mlx-wdt.txt => mlx-wdt.rst} (78%)
 rename Documentation/watchdog/{pcwd-watchdog.txt => pcwd-watchdog.rst} (89%)
 rename Documentation/watchdog/{watchdog-api.txt => watchdog-api.rst} (80%)
 rename Documentation/watchdog/{watchdog-kernel-api.txt => watchdog-kernel-api.rst} (90%)
 create mode 100644 Documentation/watchdog/watchdog-parameters.rst
 delete mode 100644 Documentation/watchdog/watchdog-parameters.txt
 rename Documentation/watchdog/{watchdog-pm.txt => watchdog-pm.rst} (92%)
 rename Documentation/watchdog/{wdt.txt => wdt.rst} (68%)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 97ec048f68af..5006f876cf0e 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -5094,7 +5094,7 @@
 			Default: 3 = cyan.
 
 	watchdog timers	[HW,WDT] For information on watchdog timers,
-			see Documentation/watchdog/watchdog-parameters.txt
+			see Documentation/watchdog/watchdog-parameters.rst
 			or other driver-specific files in the
 			Documentation/watchdog/ directory.
 
diff --git a/Documentation/kernel-per-CPU-kthreads.txt b/Documentation/kernel-per-CPU-kthreads.txt
index 23b0c8b20cd1..5623b9916411 100644
--- a/Documentation/kernel-per-CPU-kthreads.txt
+++ b/Documentation/kernel-per-CPU-kthreads.txt
@@ -348,7 +348,7 @@ To reduce its OS jitter, do at least one of the following:
 2.	Boot with "nosoftlockup=0", which will also prevent these kthreads
 	from being created.  Other related watchdog and softlockup boot
 	parameters may be found in Documentation/admin-guide/kernel-parameters.rst
-	and Documentation/watchdog/watchdog-parameters.txt.
+	and Documentation/watchdog/watchdog-parameters.rst.
 3.	Echo a zero to /proc/sys/kernel/watchdog to disable the
 	watchdog timer.
 4.	Echo a large number of /proc/sys/kernel/watchdog_thresh in
diff --git a/Documentation/watchdog/convert_drivers_to_kernel_api.txt b/Documentation/watchdog/convert_drivers_to_kernel_api.rst
similarity index 75%
rename from Documentation/watchdog/convert_drivers_to_kernel_api.txt
rename to Documentation/watchdog/convert_drivers_to_kernel_api.rst
index 9fffb2958d13..dd934cc08e40 100644
--- a/Documentation/watchdog/convert_drivers_to_kernel_api.txt
+++ b/Documentation/watchdog/convert_drivers_to_kernel_api.rst
@@ -1,6 +1,8 @@
+=========================================================
 Converting old watchdog drivers to the watchdog framework
+=========================================================
+
 by Wolfram Sang <w.sang@pengutronix.de>
-=========================================================
 
 Before the watchdog framework came into the kernel, every driver had to
 implement the API on its own. Now, as the framework factored out the common
@@ -69,16 +71,16 @@ Here is a overview of the functions and probably needed actions:
   -ENOIOCTLCMD, the IOCTLs of the framework will be tried, too. Any other error
   is directly given to the user.
 
-Example conversion:
+Example conversion::
 
--static const struct file_operations s3c2410wdt_fops = {
--       .owner          = THIS_MODULE,
--       .llseek         = no_llseek,
--       .write          = s3c2410wdt_write,
--       .unlocked_ioctl = s3c2410wdt_ioctl,
--       .open           = s3c2410wdt_open,
--       .release        = s3c2410wdt_release,
--};
+  -static const struct file_operations s3c2410wdt_fops = {
+  -       .owner          = THIS_MODULE,
+  -       .llseek         = no_llseek,
+  -       .write          = s3c2410wdt_write,
+  -       .unlocked_ioctl = s3c2410wdt_ioctl,
+  -       .open           = s3c2410wdt_open,
+  -       .release        = s3c2410wdt_release,
+  -};
 
 Check the functions for device-specific stuff and keep it for later
 refactoring. The rest can go.
@@ -89,24 +91,24 @@ Remove the miscdevice
 
 Since the file_operations are gone now, you can also remove the 'struct
 miscdevice'. The framework will create it on watchdog_dev_register() called by
-watchdog_register_device().
+watchdog_register_device()::
 
--static struct miscdevice s3c2410wdt_miscdev = {
--       .minor          = WATCHDOG_MINOR,
--       .name           = "watchdog",
--       .fops           = &s3c2410wdt_fops,
--};
+  -static struct miscdevice s3c2410wdt_miscdev = {
+  -       .minor          = WATCHDOG_MINOR,
+  -       .name           = "watchdog",
+  -       .fops           = &s3c2410wdt_fops,
+  -};
 
 
 Remove obsolete includes and defines
 ------------------------------------
 
 Because of the simplifications, a few defines are probably unused now. Remove
-them. Includes can be removed, too. For example:
+them. Includes can be removed, too. For example::
 
-- #include <linux/fs.h>
-- #include <linux/miscdevice.h> (if MODULE_ALIAS_MISCDEV is not used)
-- #include <linux/uaccess.h> (if no custom IOCTLs are used)
+  - #include <linux/fs.h>
+  - #include <linux/miscdevice.h> (if MODULE_ALIAS_MISCDEV is not used)
+  - #include <linux/uaccess.h> (if no custom IOCTLs are used)
 
 
 Add the watchdog operations
@@ -121,30 +123,30 @@ change the function header. Other changes are most likely not needed, because
 here simply happens the direct hardware access. If you have device-specific
 code left from the above steps, it should be refactored into these callbacks.
 
-Here is a simple example:
+Here is a simple example::
 
-+static struct watchdog_ops s3c2410wdt_ops = {
-+       .owner = THIS_MODULE,
-+       .start = s3c2410wdt_start,
-+       .stop = s3c2410wdt_stop,
-+       .ping = s3c2410wdt_keepalive,
-+       .set_timeout = s3c2410wdt_set_heartbeat,
-+};
+  +static struct watchdog_ops s3c2410wdt_ops = {
+  +       .owner = THIS_MODULE,
+  +       .start = s3c2410wdt_start,
+  +       .stop = s3c2410wdt_stop,
+  +       .ping = s3c2410wdt_keepalive,
+  +       .set_timeout = s3c2410wdt_set_heartbeat,
+  +};
 
-A typical function-header change looks like:
+A typical function-header change looks like::
 
--static void s3c2410wdt_keepalive(void)
-+static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
- {
-...
-+
-+       return 0;
- }
+  -static void s3c2410wdt_keepalive(void)
+  +static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
+   {
+  ...
+  +
+  +       return 0;
+   }
 
-...
+  ...
 
--       s3c2410wdt_keepalive();
-+       s3c2410wdt_keepalive(&s3c2410_wdd);
+  -       s3c2410wdt_keepalive();
+  +       s3c2410wdt_keepalive(&s3c2410_wdd);
 
 
 Add the watchdog device
@@ -159,12 +161,12 @@ static variables. Those have to be converted to use the members in
 watchdog_device. Note that the timeout values are unsigned int. Some drivers
 use signed int, so this has to be converted, too.
 
-Here is a simple example for a watchdog device:
+Here is a simple example for a watchdog device::
 
-+static struct watchdog_device s3c2410_wdd = {
-+       .info = &s3c2410_wdt_ident,
-+       .ops = &s3c2410wdt_ops,
-+};
+  +static struct watchdog_device s3c2410_wdd = {
+  +       .info = &s3c2410_wdt_ident,
+  +       .ops = &s3c2410wdt_ops,
+  +};
 
 
 Handle the 'nowayout' feature
@@ -173,12 +175,12 @@ Handle the 'nowayout' feature
 A few drivers use nowayout statically, i.e. there is no module parameter for it
 and only CONFIG_WATCHDOG_NOWAYOUT determines if the feature is going to be
 used. This needs to be converted by initializing the status variable of the
-watchdog_device like this:
+watchdog_device like this::
 
         .status = WATCHDOG_NOWAYOUT_INIT_STATUS,
 
 Most drivers, however, also allow runtime configuration of nowayout, usually
-by adding a module parameter. The conversion for this would be something like:
+by adding a module parameter. The conversion for this would be something like::
 
 	watchdog_set_nowayout(&s3c2410_wdd, nowayout);
 
@@ -191,15 +193,15 @@ Register the watchdog device
 
 Replace misc_register(&miscdev) with watchdog_register_device(&watchdog_dev).
 Make sure the return value gets checked and the error message, if present,
-still fits. Also convert the unregister case.
+still fits. Also convert the unregister case::
 
--       ret = misc_register(&s3c2410wdt_miscdev);
-+       ret = watchdog_register_device(&s3c2410_wdd);
+  -       ret = misc_register(&s3c2410wdt_miscdev);
+  +       ret = watchdog_register_device(&s3c2410_wdd);
 
-...
+  ...
 
--       misc_deregister(&s3c2410wdt_miscdev);
-+       watchdog_unregister_device(&s3c2410_wdd);
+  -       misc_deregister(&s3c2410wdt_miscdev);
+  +       watchdog_unregister_device(&s3c2410_wdd);
 
 
 Update the Kconfig-entry
@@ -207,7 +209,7 @@ Update the Kconfig-entry
 
 The entry for the driver now needs to select WATCHDOG_CORE:
 
-+       select WATCHDOG_CORE
+  +       select WATCHDOG_CORE
 
 
 Create a patch and send it to upstream
@@ -215,4 +217,3 @@ Create a patch and send it to upstream
 
 Make sure you understood Documentation/process/submitting-patches.rst and send your patch to
 linux-watchdog@vger.kernel.org. We are looking forward to it :)
-
diff --git a/Documentation/watchdog/hpwdt.txt b/Documentation/watchdog/hpwdt.rst
similarity index 79%
rename from Documentation/watchdog/hpwdt.txt
rename to Documentation/watchdog/hpwdt.rst
index aaa9e4b4bdcd..94a96371113e 100644
--- a/Documentation/watchdog/hpwdt.txt
+++ b/Documentation/watchdog/hpwdt.rst
@@ -1,7 +1,12 @@
+===========================
+HPE iLO NMI Watchdog Driver
+===========================
+
+for iLO based ProLiant Servers
+==============================
+
 Last reviewed: 08/20/2018
 
-                     HPE iLO NMI Watchdog Driver
-                   for iLO based ProLiant Servers
 
  The HPE iLO NMI Watchdog driver is a kernel module that provides basic
  watchdog functionality and handler for the iLO "Generate NMI to System"
@@ -20,23 +25,26 @@ Last reviewed: 08/20/2018
 
  The hpwdt driver also has the following module parameters:
 
- soft_margin - allows the user to set the watchdog timer value.
+ ============  ================================================================
+ soft_margin   allows the user to set the watchdog timer value.
                Default value is 30 seconds.
- timeout     - an alias of soft_margin.
- pretimeout  - allows the user to set the watchdog pretimeout value.
+ timeout       an alias of soft_margin.
+ pretimeout    allows the user to set the watchdog pretimeout value.
                This is the number of seconds before timeout when an
                NMI is delivered to the system. Setting the value to
                zero disables the pretimeout NMI.
                Default value is 9 seconds.
- nowayout    - basic watchdog parameter that does not allow the timer to
+ nowayout      basic watchdog parameter that does not allow the timer to
                be restarted or an impending ASR to be escaped.
                Default value is set when compiling the kernel. If it is set
                to "Y", then there is no way of disabling the watchdog once
                it has been started.
+ ============  ================================================================
 
- NOTE: More information about watchdog drivers in general, including the ioctl
+ NOTE:
+       More information about watchdog drivers in general, including the ioctl
        interface to /dev/watchdog can be found in
-       Documentation/watchdog/watchdog-api.txt and Documentation/IPMI.txt.
+       Documentation/watchdog/watchdog-api.rst and Documentation/IPMI.txt.
 
  Due to limitations in the iLO hardware, the NMI pretimeout if enabled,
  can only be set to 9 seconds.  Attempts to set pretimeout to other
@@ -63,4 +71,3 @@ Last reviewed: 08/20/2018
 
  The HPE iLO NMI Watchdog Driver and documentation were originally developed
  by Tom Mingarelli.
-
diff --git a/Documentation/watchdog/index.rst b/Documentation/watchdog/index.rst
new file mode 100644
index 000000000000..33a0de631e84
--- /dev/null
+++ b/Documentation/watchdog/index.rst
@@ -0,0 +1,25 @@
+:orphan:
+
+======================
+Linux Watchdog Support
+======================
+
+.. toctree::
+    :maxdepth: 1
+
+    hpwdt
+    mlx-wdt
+    pcwd-watchdog
+    watchdog-api
+    watchdog-kernel-api
+    watchdog-parameters
+    watchdog-pm
+    wdt
+    convert_drivers_to_kernel_api
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/watchdog/mlx-wdt.txt b/Documentation/watchdog/mlx-wdt.rst
similarity index 78%
rename from Documentation/watchdog/mlx-wdt.txt
rename to Documentation/watchdog/mlx-wdt.rst
index 66eeb78505c3..bf5bafac47f0 100644
--- a/Documentation/watchdog/mlx-wdt.txt
+++ b/Documentation/watchdog/mlx-wdt.rst
@@ -1,5 +1,9 @@
-		Mellanox watchdog drivers
-		for x86 based system switches
+=========================
+Mellanox watchdog drivers
+=========================
+
+for x86 based system switches
+=============================
 
 This driver provides watchdog functionality for various Mellanox
 Ethernet and Infiniband switch systems.
@@ -9,16 +13,16 @@ Mellanox watchdog device is implemented in a programmable logic device.
 There are 2 types of HW watchdog implementations.
 
 Type 1:
-Actual HW timeout can be defined as a power of 2 msec.
-e.g. timeout 20 sec will be rounded up to 32768 msec.
-The maximum timeout period is 32 sec (32768 msec.),
-Get time-left isn't supported
+  Actual HW timeout can be defined as a power of 2 msec.
+  e.g. timeout 20 sec will be rounded up to 32768 msec.
+  The maximum timeout period is 32 sec (32768 msec.),
+  Get time-left isn't supported
 
 Type 2:
-Actual HW timeout is defined in sec. and it's the same as
-a user-defined timeout.
-Maximum timeout is 255 sec.
-Get time-left is supported.
+  Actual HW timeout is defined in sec. and it's the same as
+  a user-defined timeout.
+  Maximum timeout is 255 sec.
+  Get time-left is supported.
 
 Type 1 HW watchdog implementation exist in old systems and
 all new systems have type 2 HW watchdog.
diff --git a/Documentation/watchdog/pcwd-watchdog.txt b/Documentation/watchdog/pcwd-watchdog.rst
similarity index 89%
rename from Documentation/watchdog/pcwd-watchdog.txt
rename to Documentation/watchdog/pcwd-watchdog.rst
index b8e60a441a43..405e2a370082 100644
--- a/Documentation/watchdog/pcwd-watchdog.txt
+++ b/Documentation/watchdog/pcwd-watchdog.rst
@@ -1,8 +1,13 @@
+===================================
+Berkshire Products PC Watchdog Card
+===================================
+
 Last reviewed: 10/05/2007
 
-                     Berkshire Products PC Watchdog Card
-                   Support for ISA Cards  Revision A and C
-           Documentation and Driver by Ken Hollis <kenji@bitgate.com>
+Support for ISA Cards  Revision A and C
+=======================================
+
+Documentation and Driver by Ken Hollis <kenji@bitgate.com>
 
  The PC Watchdog is a card that offers the same type of functionality that
  the WDT card does, only it doesn't require an IRQ to run.  Furthermore,
@@ -33,6 +38,7 @@ Last reviewed: 10/05/2007
 	WDIOC_GETSUPPORT
 		This returns the support of the card itself.  This
 		returns in structure "PCWDS" which returns:
+
 			options = WDIOS_TEMPPANIC
 				  (This card supports temperature)
 			firmware_version = xxxx
@@ -63,4 +69,3 @@ Last reviewed: 10/05/2007
 
  -- Ken Hollis
     (kenji@bitgate.com)
-
diff --git a/Documentation/watchdog/watchdog-api.txt b/Documentation/watchdog/watchdog-api.rst
similarity index 80%
rename from Documentation/watchdog/watchdog-api.txt
rename to Documentation/watchdog/watchdog-api.rst
index 0e62ba33b7fb..c6c1e9fa9f73 100644
--- a/Documentation/watchdog/watchdog-api.txt
+++ b/Documentation/watchdog/watchdog-api.rst
@@ -1,7 +1,10 @@
+=============================
+The Linux Watchdog driver API
+=============================
+
 Last reviewed: 10/05/2007
 
 
-The Linux Watchdog driver API.
 
 Copyright 2002 Christer Weingel <wingel@nano-system.com>
 
@@ -10,7 +13,8 @@ driver which is (c) Copyright 2000 Jakob Oestergaard <jakob@ostenfeld.dk>
 
 This document describes the state of the Linux 2.4.18 kernel.
 
-Introduction:
+Introduction
+============
 
 A Watchdog Timer (WDT) is a hardware circuit that can reset the
 computer system in case of a software fault.  You probably knew that
@@ -30,7 +34,8 @@ drivers implement different, and sometimes incompatible, parts of it.
 This file is an attempt to document the existing usage and allow
 future driver writers to use it as a reference.
 
-The simplest API:
+The simplest API
+================
 
 All drivers support the basic mode of operation, where the watchdog
 activates as soon as /dev/watchdog is opened and will reboot unless
@@ -54,7 +59,8 @@ after the timeout has passed. Watchdog devices also usually support
 the nowayout module parameter so that this option can be controlled at
 runtime.
 
-Magic Close feature:
+Magic Close feature
+===================
 
 If a driver supports "Magic Close", the driver will not disable the
 watchdog unless a specific magic character 'V' has been sent to
@@ -64,7 +70,8 @@ will assume that the daemon (and userspace in general) died, and will
 stop pinging the watchdog without disabling it first.  This will then
 cause a reboot if the watchdog is not re-opened in sufficient time.
 
-The ioctl API:
+The ioctl API
+=============
 
 All conforming drivers also support an ioctl API.
 
@@ -73,7 +80,7 @@ Pinging the watchdog using an ioctl:
 All drivers that have an ioctl interface support at least one ioctl,
 KEEPALIVE.  This ioctl does exactly the same thing as a write to the
 watchdog device, so the main loop in the above program could be
-replaced with:
+replaced with::
 
 	while (1) {
 		ioctl(fd, WDIOC_KEEPALIVE, 0);
@@ -82,14 +89,15 @@ replaced with:
 
 the argument to the ioctl is ignored.
 
-Setting and getting the timeout:
+Setting and getting the timeout
+===============================
 
 For some drivers it is possible to modify the watchdog timeout on the
 fly with the SETTIMEOUT ioctl, those drivers have the WDIOF_SETTIMEOUT
 flag set in their option field.  The argument is an integer
 representing the timeout in seconds.  The driver returns the real
 timeout used in the same variable, and this timeout might differ from
-the requested one due to limitation of the hardware.
+the requested one due to limitation of the hardware::
 
     int timeout = 45;
     ioctl(fd, WDIOC_SETTIMEOUT, &timeout);
@@ -99,18 +107,19 @@ This example might actually print "The timeout was set to 60 seconds"
 if the device has a granularity of minutes for its timeout.
 
 Starting with the Linux 2.4.18 kernel, it is possible to query the
-current timeout using the GETTIMEOUT ioctl.
+current timeout using the GETTIMEOUT ioctl::
 
     ioctl(fd, WDIOC_GETTIMEOUT, &timeout);
     printf("The timeout was is %d seconds\n", timeout);
 
-Pretimeouts:
+Pretimeouts
+===========
 
 Some watchdog timers can be set to have a trigger go off before the
 actual time they will reset the system.  This can be done with an NMI,
 interrupt, or other mechanism.  This allows Linux to record useful
 information (like panic information and kernel coredumps) before it
-resets.
+resets::
 
     pretimeout = 10;
     ioctl(fd, WDIOC_SETPRETIMEOUT, &pretimeout);
@@ -121,89 +130,113 @@ the pretimeout.  So, for instance, if you set the timeout to 60 seconds
 and the pretimeout to 10 seconds, the pretimeout will go off in 50
 seconds.  Setting a pretimeout to zero disables it.
 
-There is also a get function for getting the pretimeout:
+There is also a get function for getting the pretimeout::
 
     ioctl(fd, WDIOC_GETPRETIMEOUT, &timeout);
     printf("The pretimeout was is %d seconds\n", timeout);
 
 Not all watchdog drivers will support a pretimeout.
 
-Get the number of seconds before reboot:
+Get the number of seconds before reboot
+=======================================
 
 Some watchdog drivers have the ability to report the remaining time
 before the system will reboot. The WDIOC_GETTIMELEFT is the ioctl
-that returns the number of seconds before reboot.
+that returns the number of seconds before reboot::
 
     ioctl(fd, WDIOC_GETTIMELEFT, &timeleft);
     printf("The timeout was is %d seconds\n", timeleft);
 
-Environmental monitoring:
+Environmental monitoring
+========================
 
 All watchdog drivers are required return more information about the system,
 some do temperature, fan and power level monitoring, some can tell you
 the reason for the last reboot of the system.  The GETSUPPORT ioctl is
-available to ask what the device can do:
+available to ask what the device can do::
 
 	struct watchdog_info ident;
 	ioctl(fd, WDIOC_GETSUPPORT, &ident);
 
 the fields returned in the ident struct are:
 
+	================	=============================================
         identity		a string identifying the watchdog driver
 	firmware_version	the firmware version of the card if available
 	options			a flags describing what the device supports
+	================	=============================================
 
 the options field can have the following bits set, and describes what
 kind of information that the GET_STATUS and GET_BOOT_STATUS ioctls can
 return.   [FIXME -- Is this correct?]
 
+	================	=========================
 	WDIOF_OVERHEAT		Reset due to CPU overheat
+	================	=========================
 
 The machine was last rebooted by the watchdog because the thermal limit was
-exceeded
+exceeded:
 
+	==============		==========
 	WDIOF_FANFAULT		Fan failed
+	==============		==========
 
 A system fan monitored by the watchdog card has failed
 
+	=============		================
 	WDIOF_EXTERN1		External relay 1
+	=============		================
 
 External monitoring relay/source 1 was triggered. Controllers intended for
 real world applications include external monitoring pins that will trigger
 a reset.
 
+	=============		================
 	WDIOF_EXTERN2		External relay 2
+	=============		================
 
 External monitoring relay/source 2 was triggered
 
+	================	=====================
 	WDIOF_POWERUNDER	Power bad/power fault
+	================	=====================
 
 The machine is showing an undervoltage status
 
+	===============		=============================
 	WDIOF_CARDRESET		Card previously reset the CPU
+	===============		=============================
 
 The last reboot was caused by the watchdog card
 
+	================	=====================
 	WDIOF_POWEROVER		Power over voltage
+	================	=====================
 
 The machine is showing an overvoltage status. Note that if one level is
 under and one over both bits will be set - this may seem odd but makes
 sense.
 
+	===================	=====================
 	WDIOF_KEEPALIVEPING	Keep alive ping reply
+	===================	=====================
 
 The watchdog saw a keepalive ping since it was last queried.
 
+	================	=======================
 	WDIOF_SETTIMEOUT	Can set/get the timeout
+	================	=======================
 
 The watchdog can do pretimeouts.
 
+	================	================================
 	WDIOF_PRETIMEOUT	Pretimeout (in seconds), get/set
+	================	================================
 
 
 For those drivers that return any bits set in the option field, the
 GETSTATUS and GETBOOTSTATUS ioctls can be used to ask for the current
-status, and the status at the last reboot, respectively.  
+status, and the status at the last reboot, respectively::
 
     int flags;
     ioctl(fd, WDIOC_GETSTATUS, &flags);
@@ -216,22 +249,23 @@ Note that not all devices support these two calls, and some only
 support the GETBOOTSTATUS call.
 
 Some drivers can measure the temperature using the GETTEMP ioctl.  The
-returned value is the temperature in degrees fahrenheit.
+returned value is the temperature in degrees fahrenheit::
 
     int temperature;
     ioctl(fd, WDIOC_GETTEMP, &temperature);
 
 Finally the SETOPTIONS ioctl can be used to control some aspects of
-the cards operation.
+the cards operation::
 
     int options = 0;
     ioctl(fd, WDIOC_SETOPTIONS, &options);
 
 The following options are available:
 
+	=================	================================
 	WDIOS_DISABLECARD	Turn off the watchdog timer
 	WDIOS_ENABLECARD	Turn on the watchdog timer
 	WDIOS_TEMPPANIC		Kernel panic on temperature trip
+	=================	================================
 
 [FIXME -- better explanations]
-
diff --git a/Documentation/watchdog/watchdog-kernel-api.txt b/Documentation/watchdog/watchdog-kernel-api.rst
similarity index 90%
rename from Documentation/watchdog/watchdog-kernel-api.txt
rename to Documentation/watchdog/watchdog-kernel-api.rst
index 3a91ef5af044..864edbe932c1 100644
--- a/Documentation/watchdog/watchdog-kernel-api.txt
+++ b/Documentation/watchdog/watchdog-kernel-api.rst
@@ -1,5 +1,7 @@
-The Linux WatchDog Timer Driver Core kernel API.
 ===============================================
+The Linux WatchDog Timer Driver Core kernel API
+===============================================
+
 Last reviewed: 12-Feb-2013
 
 Wim Van Sebroeck <wim@iguana.be>
@@ -9,7 +11,7 @@ Introduction
 This document does not describe what a WatchDog Timer (WDT) Driver or Device is.
 It also does not describe the API which can be used by user space to communicate
 with a WatchDog Timer. If you want to know this then please read the following
-file: Documentation/watchdog/watchdog-api.txt .
+file: Documentation/watchdog/watchdog-api.rst .
 
 So what does this document describe? It describes the API that can be used by
 WatchDog Timer Drivers that want to use the WatchDog Timer Driver Core
@@ -23,10 +25,10 @@ The API
 Each watchdog timer driver that wants to use the WatchDog Timer Driver Core
 must #include <linux/watchdog.h> (you would have to do this anyway when
 writing a watchdog device driver). This include file contains following
-register/unregister routines:
+register/unregister routines::
 
-extern int watchdog_register_device(struct watchdog_device *);
-extern void watchdog_unregister_device(struct watchdog_device *);
+	extern int watchdog_register_device(struct watchdog_device *);
+	extern void watchdog_unregister_device(struct watchdog_device *);
 
 The watchdog_register_device routine registers a watchdog timer device.
 The parameter of this routine is a pointer to a watchdog_device structure.
@@ -40,9 +42,9 @@ The watchdog subsystem includes an registration deferral mechanism,
 which allows you to register an watchdog as early as you wish during
 the boot process.
 
-The watchdog device structure looks like this:
+The watchdog device structure looks like this::
 
-struct watchdog_device {
+  struct watchdog_device {
 	int id;
 	struct device *parent;
 	const struct attribute_group **groups;
@@ -62,9 +64,10 @@ struct watchdog_device {
 	struct watchdog_core_data *wd_data;
 	unsigned long status;
 	struct list_head deferred;
-};
+  };
 
 It contains following fields:
+
 * id: set by watchdog_register_device, id 0 is special. It has both a
   /dev/watchdog0 cdev (dynamic major, minor 0) as well as the old
   /dev/watchdog miscdev. The id is set automatically when calling
@@ -114,9 +117,9 @@ It contains following fields:
 * deferred: entry in wtd_deferred_reg_list which is used to
   register early initialized watchdogs.
 
-The list of watchdog operations is defined as:
+The list of watchdog operations is defined as::
 
-struct watchdog_ops {
+  struct watchdog_ops {
 	struct module *owner;
 	/* mandatory operations */
 	int (*start)(struct watchdog_device *);
@@ -129,7 +132,7 @@ struct watchdog_ops {
 	unsigned int (*get_timeleft)(struct watchdog_device *);
 	int (*restart)(struct watchdog_device *);
 	long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long);
-};
+  };
 
 It is important that you first define the module owner of the watchdog timer
 driver's operations. This module owner will be used to lock the module when
@@ -138,6 +141,7 @@ module and /dev/watchdog is still open).
 
 Some operations are mandatory and some are optional. The mandatory operations
 are:
+
 * start: this is a pointer to the routine that starts the watchdog timer
   device.
   The routine needs a pointer to the watchdog timer device structure as a
@@ -146,51 +150,64 @@ are:
 Not all watchdog timer hardware supports the same functionality. That's why
 all other routines/operations are optional. They only need to be provided if
 they are supported. These optional routines/operations are:
+
 * stop: with this routine the watchdog timer device is being stopped.
+
   The routine needs a pointer to the watchdog timer device structure as a
   parameter. It returns zero on success or a negative errno code for failure.
   Some watchdog timer hardware can only be started and not be stopped. A
   driver supporting such hardware does not have to implement the stop routine.
+
   If a driver has no stop function, the watchdog core will set WDOG_HW_RUNNING
   and start calling the driver's keepalive pings function after the watchdog
   device is closed.
+
   If a watchdog driver does not implement the stop function, it must set
   max_hw_heartbeat_ms.
 * ping: this is the routine that sends a keepalive ping to the watchdog timer
   hardware.
+
   The routine needs a pointer to the watchdog timer device structure as a
   parameter. It returns zero on success or a negative errno code for failure.
+
   Most hardware that does not support this as a separate function uses the
   start function to restart the watchdog timer hardware. And that's also what
   the watchdog timer driver core does: to send a keepalive ping to the watchdog
   timer hardware it will either use the ping operation (when available) or the
   start operation (when the ping operation is not available).
+
   (Note: the WDIOC_KEEPALIVE ioctl call will only be active when the
   WDIOF_KEEPALIVEPING bit has been set in the option field on the watchdog's
   info structure).
 * status: this routine checks the status of the watchdog timer device. The
   status of the device is reported with watchdog WDIOF_* status flags/bits.
+
   WDIOF_MAGICCLOSE and WDIOF_KEEPALIVEPING are reported by the watchdog core;
   it is not necessary to report those bits from the driver. Also, if no status
   function is provided by the driver, the watchdog core reports the status bits
   provided in the bootstatus variable of struct watchdog_device.
+
 * set_timeout: this routine checks and changes the timeout of the watchdog
   timer device. It returns 0 on success, -EINVAL for "parameter out of range"
   and -EIO for "could not write value to the watchdog". On success this
   routine should set the timeout value of the watchdog_device to the
   achieved timeout value (which may be different from the requested one
   because the watchdog does not necessarily have a 1 second resolution).
+
   Drivers implementing max_hw_heartbeat_ms set the hardware watchdog heartbeat
   to the minimum of timeout and max_hw_heartbeat_ms. Those drivers set the
   timeout value of the watchdog_device either to the requested timeout value
   (if it is larger than max_hw_heartbeat_ms), or to the achieved timeout value.
   (Note: the WDIOF_SETTIMEOUT needs to be set in the options field of the
   watchdog's info structure).
+
   If the watchdog driver does not have to perform any action but setting the
   watchdog_device.timeout, this callback can be omitted.
+
   If set_timeout is not provided but, WDIOF_SETTIMEOUT is set, the watchdog
   infrastructure updates the timeout value of the watchdog_device internally
   to the requested value.
+
   If the pretimeout feature is used (WDIOF_PRETIMEOUT), then set_timeout must
   also take care of checking if pretimeout is still valid and set up the timer
   accordingly. This can't be done in the core without races, so it is the
@@ -201,13 +218,16 @@ they are supported. These optional routines/operations are:
   seconds before the actual timeout would happen. It returns 0 on success,
   -EINVAL for "parameter out of range" and -EIO for "could not write value to
   the watchdog". A value of 0 disables pretimeout notification.
+
   (Note: the WDIOF_PRETIMEOUT needs to be set in the options field of the
   watchdog's info structure).
+
   If the watchdog driver does not have to perform any action but setting the
   watchdog_device.pretimeout, this callback can be omitted. That means if
   set_pretimeout is not provided but WDIOF_PRETIMEOUT is set, the watchdog
   infrastructure updates the pretimeout value of the watchdog_device internally
   to the requested value.
+
 * get_timeleft: this routines returns the time that's left before a reset.
 * restart: this routine restarts the machine. It returns 0 on success or a
   negative errno code for failure.
@@ -218,6 +238,7 @@ they are supported. These optional routines/operations are:
 
 The status bits should (preferably) be set with the set_bit and clear_bit alike
 bit-operations. The status bits that are defined are:
+
 * WDOG_ACTIVE: this status bit indicates whether or not a watchdog timer device
   is active or not from user perspective. User space is expected to send
   heartbeat requests to the driver while this flag is set.
@@ -235,22 +256,30 @@ bit-operations. The status bits that are defined are:
 
   To set the WDOG_NO_WAY_OUT status bit (before registering your watchdog
   timer device) you can either:
+
   * set it statically in your watchdog_device struct with
+
 	.status = WATCHDOG_NOWAYOUT_INIT_STATUS,
+
     (this will set the value the same as CONFIG_WATCHDOG_NOWAYOUT) or
-  * use the following helper function:
-  static inline void watchdog_set_nowayout(struct watchdog_device *wdd, int nowayout)
+  * use the following helper function::
+
+	static inline void watchdog_set_nowayout(struct watchdog_device *wdd,
+						 int nowayout)
+
+Note:
+   The WatchDog Timer Driver Core supports the magic close feature and
+   the nowayout feature. To use the magic close feature you must set the
+   WDIOF_MAGICCLOSE bit in the options field of the watchdog's info structure.
 
-Note: The WatchDog Timer Driver Core supports the magic close feature and
-the nowayout feature. To use the magic close feature you must set the
-WDIOF_MAGICCLOSE bit in the options field of the watchdog's info structure.
 The nowayout feature will overrule the magic close feature.
 
 To get or set driver specific data the following two helper functions should be
-used:
+used::
 
-static inline void watchdog_set_drvdata(struct watchdog_device *wdd, void *data)
-static inline void *watchdog_get_drvdata(struct watchdog_device *wdd)
+  static inline void watchdog_set_drvdata(struct watchdog_device *wdd,
+					  void *data)
+  static inline void *watchdog_get_drvdata(struct watchdog_device *wdd)
 
 The watchdog_set_drvdata function allows you to add driver specific data. The
 arguments of this function are the watchdog device where you want to add the
@@ -260,10 +289,11 @@ The watchdog_get_drvdata function allows you to retrieve driver specific data.
 The argument of this function is the watchdog device where you want to retrieve
 data from. The function returns the pointer to the driver specific data.
 
-To initialize the timeout field, the following function can be used:
+To initialize the timeout field, the following function can be used::
 
-extern int watchdog_init_timeout(struct watchdog_device *wdd,
-                                  unsigned int timeout_parm, struct device *dev);
+  extern int watchdog_init_timeout(struct watchdog_device *wdd,
+                                   unsigned int timeout_parm,
+                                   struct device *dev);
 
 The watchdog_init_timeout function allows you to initialize the timeout field
 using the module timeout parameter or by retrieving the timeout-sec property from
@@ -272,30 +302,33 @@ to set the default timeout value as timeout value in the watchdog_device and
 then use this function to set the user "preferred" timeout value.
 This routine returns zero on success and a negative errno code for failure.
 
-To disable the watchdog on reboot, the user must call the following helper:
+To disable the watchdog on reboot, the user must call the following helper::
 
-static inline void watchdog_stop_on_reboot(struct watchdog_device *wdd);
+  static inline void watchdog_stop_on_reboot(struct watchdog_device *wdd);
 
 To disable the watchdog when unregistering the watchdog, the user must call
 the following helper. Note that this will only stop the watchdog if the
 nowayout flag is not set.
 
-static inline void watchdog_stop_on_unregister(struct watchdog_device *wdd);
+::
+
+  static inline void watchdog_stop_on_unregister(struct watchdog_device *wdd);
 
 To change the priority of the restart handler the following helper should be
-used:
+used::
 
-void watchdog_set_restart_priority(struct watchdog_device *wdd, int priority);
+  void watchdog_set_restart_priority(struct watchdog_device *wdd, int priority);
 
 User should follow the following guidelines for setting the priority:
+
 * 0: should be called in last resort, has limited restart capabilities
 * 128: default restart handler, use if no other handler is expected to be
   available, and/or if restart is sufficient to restart the entire system
 * 255: highest priority, will preempt all other restart handlers
 
-To raise a pretimeout notification, the following function should be used:
+To raise a pretimeout notification, the following function should be used::
 
-void watchdog_notify_pretimeout(struct watchdog_device *wdd)
+  void watchdog_notify_pretimeout(struct watchdog_device *wdd)
 
 The function can be called in the interrupt context. If watchdog pretimeout
 governor framework (kbuild CONFIG_WATCHDOG_PRETIMEOUT_GOV symbol) is enabled,
diff --git a/Documentation/watchdog/watchdog-parameters.rst b/Documentation/watchdog/watchdog-parameters.rst
new file mode 100644
index 000000000000..b121caae7798
--- /dev/null
+++ b/Documentation/watchdog/watchdog-parameters.rst
@@ -0,0 +1,736 @@
+==========================
+WatchDog Module Parameters
+==========================
+
+This file provides information on the module parameters of many of
+the Linux watchdog drivers.  Watchdog driver parameter specs should
+be listed here unless the driver has its own driver-specific information
+file.
+
+See Documentation/admin-guide/kernel-parameters.rst for information on
+providing kernel parameters for builtin drivers versus loadable
+modules.
+
+-------------------------------------------------
+
+acquirewdt:
+    wdt_stop:
+	Acquire WDT 'stop' io port (default 0x43)
+    wdt_start:
+	Acquire WDT 'start' io port (default 0x443)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+advantechwdt:
+    wdt_stop:
+	Advantech WDT 'stop' io port (default 0x443)
+    wdt_start:
+	Advantech WDT 'start' io port (default 0x443)
+    timeout:
+	Watchdog timeout in seconds. 1<= timeout <=63, default=60.
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+alim1535_wdt:
+    timeout:
+	Watchdog timeout in seconds. (0 < timeout < 18000, default=60
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+alim7101_wdt:
+    timeout:
+	Watchdog timeout in seconds. (1<=timeout<=3600, default=30
+    use_gpio:
+	Use the gpio watchdog (required by old cobalt boards).
+	default=0/off/no
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+ar7_wdt:
+    margin:
+	Watchdog margin in seconds (default=60)
+    nowayout:
+	Disable watchdog shutdown on close
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+armada_37xx_wdt:
+    timeout:
+	Watchdog timeout in seconds. (default=120)
+    nowayout:
+	Disable watchdog shutdown on close
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+at91rm9200_wdt:
+    wdt_time:
+	Watchdog time in seconds. (default=5)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+at91sam9_wdt:
+    heartbeat:
+	Watchdog heartbeats in seconds. (default = 15)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+bcm47xx_wdt:
+    wdt_time:
+	Watchdog time in seconds. (default=30)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+coh901327_wdt:
+    margin:
+	Watchdog margin in seconds (default 60s)
+
+-------------------------------------------------
+
+cpu5wdt:
+    port:
+	base address of watchdog card, default is 0x91
+    verbose:
+	be verbose, default is 0 (no)
+    ticks:
+	count down ticks, default is 10000
+
+-------------------------------------------------
+
+cpwd:
+    wd0_timeout:
+	Default watchdog0 timeout in 1/10secs
+    wd1_timeout:
+	Default watchdog1 timeout in 1/10secs
+    wd2_timeout:
+	Default watchdog2 timeout in 1/10secs
+
+-------------------------------------------------
+
+da9052wdt:
+    timeout:
+	Watchdog timeout in seconds. 2<= timeout <=131, default=2.048s
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+davinci_wdt:
+    heartbeat:
+	Watchdog heartbeat period in seconds from 1 to 600, default 60
+
+-------------------------------------------------
+
+ebc-c384_wdt:
+    timeout:
+	Watchdog timeout in seconds. (1<=timeout<=15300, default=60)
+    nowayout:
+	Watchdog cannot be stopped once started
+
+-------------------------------------------------
+
+ep93xx_wdt:
+    nowayout:
+	Watchdog cannot be stopped once started
+    timeout:
+	Watchdog timeout in seconds. (1<=timeout<=3600, default=TBD)
+
+-------------------------------------------------
+
+eurotechwdt:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+    io:
+	Eurotech WDT io port (default=0x3f0)
+    irq:
+	Eurotech WDT irq (default=10)
+    ev:
+	Eurotech WDT event type (default is `int`)
+
+-------------------------------------------------
+
+gef_wdt:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+geodewdt:
+    timeout:
+	Watchdog timeout in seconds. 1<= timeout <=131, default=60.
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+i6300esb:
+    heartbeat:
+	Watchdog heartbeat in seconds. (1<heartbeat<2046, default=30)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+iTCO_wdt:
+    heartbeat:
+	Watchdog heartbeat in seconds.
+	(2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=30)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+iTCO_vendor_support:
+    vendorsupport:
+	iTCO vendor specific support mode, default=0 (none),
+	1=SuperMicro Pent3, 2=SuperMicro Pent4+, 911=Broken SMI BIOS
+
+-------------------------------------------------
+
+ib700wdt:
+    timeout:
+	Watchdog timeout in seconds. 0<= timeout <=30, default=30.
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+ibmasr:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+imx2_wdt:
+    timeout:
+	Watchdog timeout in seconds (default 60 s)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+indydog:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+iop_wdt:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+it8712f_wdt:
+    margin:
+	Watchdog margin in seconds (default 60)
+    nowayout:
+	Disable watchdog shutdown on close
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+it87_wdt:
+    nogameport:
+	Forbid the activation of game port, default=0
+    nocir:
+	Forbid the use of CIR (workaround for some buggy setups); set to 1 if
+system resets despite watchdog daemon running, default=0
+    exclusive:
+	Watchdog exclusive device open, default=1
+    timeout:
+	Watchdog timeout in seconds, default=60
+    testmode:
+	Watchdog test mode (1 = no reboot), default=0
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+ixp4xx_wdt:
+    heartbeat:
+	Watchdog heartbeat in seconds (default 60s)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+ks8695_wdt:
+    wdt_time:
+	Watchdog time in seconds. (default=5)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+machzwd:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+    action:
+	after watchdog resets, generate:
+	0 = RESET(*)  1 = SMI  2 = NMI  3 = SCI
+
+-------------------------------------------------
+
+max63xx_wdt:
+    heartbeat:
+	Watchdog heartbeat period in seconds from 1 to 60, default 60
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+    nodelay:
+	Force selection of a timeout setting without initial delay
+	(max6373/74 only, default=0)
+
+-------------------------------------------------
+
+mixcomwd:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+mpc8xxx_wdt:
+    timeout:
+	Watchdog timeout in ticks. (0<timeout<65536, default=65535)
+    reset:
+	Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+mv64x60_wdt:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+ni903x_wdt:
+    timeout:
+	Initial watchdog timeout in seconds (0<timeout<516, default=60)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+nic7018_wdt:
+    timeout:
+	Initial watchdog timeout in seconds (0<timeout<464, default=80)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+nuc900_wdt:
+    heartbeat:
+	Watchdog heartbeats in seconds.
+	(default = 15)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+omap_wdt:
+    timer_margin:
+	initial watchdog timeout (in seconds)
+    early_enable:
+	Watchdog is started on module insertion (default=0
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+orion_wdt:
+    heartbeat:
+	Initial watchdog heartbeat in seconds
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+pc87413_wdt:
+    io:
+	pc87413 WDT I/O port (default: io).
+    timeout:
+	Watchdog timeout in minutes (default=timeout).
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+pika_wdt:
+    heartbeat:
+	Watchdog heartbeats in seconds. (default = 15)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+pnx4008_wdt:
+    heartbeat:
+	Watchdog heartbeat period in seconds from 1 to 60, default 19
+    nowayout:
+	Set to 1 to keep watchdog running after device release
+
+-------------------------------------------------
+
+pnx833x_wdt:
+    timeout:
+	Watchdog timeout in Mhz. (68Mhz clock), default=2040000000 (30 seconds)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+    start_enabled:
+	Watchdog is started on module insertion (default=1)
+
+-------------------------------------------------
+
+rc32434_wdt:
+    timeout:
+	Watchdog timeout value, in seconds (default=20)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+riowd:
+    riowd_timeout:
+	Watchdog timeout in minutes (default=1)
+
+-------------------------------------------------
+
+s3c2410_wdt:
+    tmr_margin:
+	Watchdog tmr_margin in seconds. (default=15)
+    tmr_atboot:
+	Watchdog is started at boot time if set to 1, default=0
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+    soft_noboot:
+	Watchdog action, set to 1 to ignore reboots, 0 to reboot
+    debug:
+	Watchdog debug, set to >1 for debug, (default 0)
+
+-------------------------------------------------
+
+sa1100_wdt:
+    margin:
+	Watchdog margin in seconds (default 60s)
+
+-------------------------------------------------
+
+sb_wdog:
+    timeout:
+	Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs)
+
+-------------------------------------------------
+
+sbc60xxwdt:
+    wdt_stop:
+	SBC60xx WDT 'stop' io port (default 0x45)
+    wdt_start:
+	SBC60xx WDT 'start' io port (default 0x443)
+    timeout:
+	Watchdog timeout in seconds. (1<=timeout<=3600, default=30)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+sbc7240_wdt:
+    timeout:
+	Watchdog timeout in seconds. (1<=timeout<=255, default=30)
+    nowayout:
+	Disable watchdog when closing device file
+
+-------------------------------------------------
+
+sbc8360:
+    timeout:
+	Index into timeout table (0-63) (default=27 (60s))
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+sbc_epx_c3:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+sbc_fitpc2_wdt:
+    margin:
+	Watchdog margin in seconds (default 60s)
+    nowayout:
+	Watchdog cannot be stopped once started
+
+-------------------------------------------------
+
+sbsa_gwdt:
+    timeout:
+	Watchdog timeout in seconds. (default 10s)
+    action:
+	Watchdog action at the first stage timeout,
+	set to 0 to ignore, 1 to panic. (default=0)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+sc1200wdt:
+    isapnp:
+	When set to 0 driver ISA PnP support will be disabled (default=1)
+    io:
+	io port
+    timeout:
+	range is 0-255 minutes, default is 1
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+sc520_wdt:
+    timeout:
+	Watchdog timeout in seconds. (1 <= timeout <= 3600, default=30)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+sch311x_wdt:
+    force_id:
+	Override the detected device ID
+    therm_trip:
+	Should a ThermTrip trigger the reset generator
+    timeout:
+	Watchdog timeout in seconds. 1<= timeout <=15300, default=60
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+scx200_wdt:
+    margin:
+	Watchdog margin in seconds
+    nowayout:
+	Disable watchdog shutdown on close
+
+-------------------------------------------------
+
+shwdt:
+    clock_division_ratio:
+	Clock division ratio. Valid ranges are from 0x5 (1.31ms)
+	to 0x7 (5.25ms). (default=7)
+    heartbeat:
+	Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+smsc37b787_wdt:
+    timeout:
+	range is 1-255 units, default is 60
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+softdog:
+    soft_margin:
+	Watchdog soft_margin in seconds.
+	(0 < soft_margin < 65536, default=60)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+    soft_noboot:
+	Softdog action, set to 1 to ignore reboots, 0 to reboot
+	(default=0)
+
+-------------------------------------------------
+
+stmp3xxx_wdt:
+    heartbeat:
+	Watchdog heartbeat period in seconds from 1 to 4194304, default 19
+
+-------------------------------------------------
+
+tegra_wdt:
+    heartbeat:
+	Watchdog heartbeats in seconds. (default = 120)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+ts72xx_wdt:
+    timeout:
+	Watchdog timeout in seconds. (1 <= timeout <= 8, default=8)
+    nowayout:
+	Disable watchdog shutdown on close
+
+-------------------------------------------------
+
+twl4030_wdt:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+txx9wdt:
+    timeout:
+	Watchdog timeout in seconds. (0<timeout<N, default=60)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+uniphier_wdt:
+    timeout:
+	Watchdog timeout in power of two seconds.
+	(1 <= timeout <= 128, default=64)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+w83627hf_wdt:
+    wdt_io:
+	w83627hf/thf WDT io port (default 0x2E)
+    timeout:
+	Watchdog timeout in seconds. 1 <= timeout <= 255, default=60.
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+w83877f_wdt:
+    timeout:
+	Watchdog timeout in seconds. (1<=timeout<=3600, default=30)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+w83977f_wdt:
+    timeout:
+	Watchdog timeout in seconds (15..7635), default=45)
+    testmode:
+	Watchdog testmode (1 = no reboot), default=0
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+wafer5823wdt:
+    timeout:
+	Watchdog timeout in seconds. 1 <= timeout <= 255, default=60.
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+wdt285:
+    soft_margin:
+	Watchdog timeout in seconds (default=60)
+
+-------------------------------------------------
+
+wdt977:
+    timeout:
+	Watchdog timeout in seconds (60..15300, default=60)
+    testmode:
+	Watchdog testmode (1 = no reboot), default=0
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+wm831x_wdt:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+wm8350_wdt:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+sun4v_wdt:
+    timeout_ms:
+	Watchdog timeout in milliseconds 1..180000, default=60000)
+    nowayout:
+	Watchdog cannot be stopped once started
diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt
deleted file mode 100644
index 0b88e333f9e1..000000000000
--- a/Documentation/watchdog/watchdog-parameters.txt
+++ /dev/null
@@ -1,410 +0,0 @@
-This file provides information on the module parameters of many of
-the Linux watchdog drivers.  Watchdog driver parameter specs should
-be listed here unless the driver has its own driver-specific information
-file.
-
-
-See Documentation/admin-guide/kernel-parameters.rst for information on
-providing kernel parameters for builtin drivers versus loadable
-modules.
-
-
--------------------------------------------------
-acquirewdt:
-wdt_stop: Acquire WDT 'stop' io port (default 0x43)
-wdt_start: Acquire WDT 'start' io port (default 0x443)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-advantechwdt:
-wdt_stop: Advantech WDT 'stop' io port (default 0x443)
-wdt_start: Advantech WDT 'start' io port (default 0x443)
-timeout: Watchdog timeout in seconds. 1<= timeout <=63, default=60.
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-alim1535_wdt:
-timeout: Watchdog timeout in seconds. (0 < timeout < 18000, default=60
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-alim7101_wdt:
-timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=30
-use_gpio: Use the gpio watchdog (required by old cobalt boards).
-	default=0/off/no
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-ar7_wdt:
-margin: Watchdog margin in seconds (default=60)
-nowayout: Disable watchdog shutdown on close
-	(default=kernel config parameter)
--------------------------------------------------
-armada_37xx_wdt:
-timeout: Watchdog timeout in seconds. (default=120)
-nowayout: Disable watchdog shutdown on close
-	(default=kernel config parameter)
--------------------------------------------------
-at91rm9200_wdt:
-wdt_time: Watchdog time in seconds. (default=5)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-at91sam9_wdt:
-heartbeat: Watchdog heartbeats in seconds. (default = 15)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-bcm47xx_wdt:
-wdt_time: Watchdog time in seconds. (default=30)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-coh901327_wdt:
-margin: Watchdog margin in seconds (default 60s)
--------------------------------------------------
-cpu5wdt:
-port: base address of watchdog card, default is 0x91
-verbose: be verbose, default is 0 (no)
-ticks: count down ticks, default is 10000
--------------------------------------------------
-cpwd:
-wd0_timeout: Default watchdog0 timeout in 1/10secs
-wd1_timeout: Default watchdog1 timeout in 1/10secs
-wd2_timeout: Default watchdog2 timeout in 1/10secs
--------------------------------------------------
-da9052wdt:
-timeout: Watchdog timeout in seconds. 2<= timeout <=131, default=2.048s
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-davinci_wdt:
-heartbeat: Watchdog heartbeat period in seconds from 1 to 600, default 60
--------------------------------------------------
-ebc-c384_wdt:
-timeout: Watchdog timeout in seconds. (1<=timeout<=15300, default=60)
-nowayout: Watchdog cannot be stopped once started
--------------------------------------------------
-ep93xx_wdt:
-nowayout: Watchdog cannot be stopped once started
-timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=TBD)
--------------------------------------------------
-eurotechwdt:
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
-io: Eurotech WDT io port (default=0x3f0)
-irq: Eurotech WDT irq (default=10)
-ev: Eurotech WDT event type (default is `int')
--------------------------------------------------
-gef_wdt:
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-geodewdt:
-timeout: Watchdog timeout in seconds. 1<= timeout <=131, default=60.
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-i6300esb:
-heartbeat: Watchdog heartbeat in seconds. (1<heartbeat<2046, default=30)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-iTCO_wdt:
-heartbeat: Watchdog heartbeat in seconds.
-	(2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=30)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-iTCO_vendor_support:
-vendorsupport: iTCO vendor specific support mode, default=0 (none),
-	1=SuperMicro Pent3, 2=SuperMicro Pent4+, 911=Broken SMI BIOS
--------------------------------------------------
-ib700wdt:
-timeout: Watchdog timeout in seconds. 0<= timeout <=30, default=30.
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-ibmasr:
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-imx2_wdt:
-timeout: Watchdog timeout in seconds (default 60 s)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-indydog:
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-iop_wdt:
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-it8712f_wdt:
-margin: Watchdog margin in seconds (default 60)
-nowayout: Disable watchdog shutdown on close
-	(default=kernel config parameter)
--------------------------------------------------
-it87_wdt:
-nogameport: Forbid the activation of game port, default=0
-nocir: Forbid the use of CIR (workaround for some buggy setups); set to 1 if
-system resets despite watchdog daemon running, default=0
-exclusive: Watchdog exclusive device open, default=1
-timeout: Watchdog timeout in seconds, default=60
-testmode: Watchdog test mode (1 = no reboot), default=0
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-ixp4xx_wdt:
-heartbeat: Watchdog heartbeat in seconds (default 60s)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-ks8695_wdt:
-wdt_time: Watchdog time in seconds. (default=5)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-machzwd:
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
-action: after watchdog resets, generate:
-	0 = RESET(*)  1 = SMI  2 = NMI  3 = SCI
--------------------------------------------------
-max63xx_wdt:
-heartbeat: Watchdog heartbeat period in seconds from 1 to 60, default 60
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
-nodelay: Force selection of a timeout setting without initial delay
-	(max6373/74 only, default=0)
--------------------------------------------------
-mixcomwd:
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-mpc8xxx_wdt:
-timeout: Watchdog timeout in ticks. (0<timeout<65536, default=65535)
-reset: Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-mv64x60_wdt:
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-ni903x_wdt:
-timeout: Initial watchdog timeout in seconds (0<timeout<516, default=60)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-nic7018_wdt:
-timeout: Initial watchdog timeout in seconds (0<timeout<464, default=80)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-nuc900_wdt:
-heartbeat: Watchdog heartbeats in seconds.
-	(default = 15)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-omap_wdt:
-timer_margin: initial watchdog timeout (in seconds)
-early_enable: Watchdog is started on module insertion (default=0
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-orion_wdt:
-heartbeat: Initial watchdog heartbeat in seconds
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-pc87413_wdt:
-io: pc87413 WDT I/O port (default: io).
-timeout: Watchdog timeout in minutes (default=timeout).
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-pika_wdt:
-heartbeat: Watchdog heartbeats in seconds. (default = 15)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-pnx4008_wdt:
-heartbeat: Watchdog heartbeat period in seconds from 1 to 60, default 19
-nowayout: Set to 1 to keep watchdog running after device release
--------------------------------------------------
-pnx833x_wdt:
-timeout: Watchdog timeout in Mhz. (68Mhz clock), default=2040000000 (30 seconds)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
-start_enabled: Watchdog is started on module insertion (default=1)
--------------------------------------------------
-rc32434_wdt:
-timeout: Watchdog timeout value, in seconds (default=20)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-riowd:
-riowd_timeout: Watchdog timeout in minutes (default=1)
--------------------------------------------------
-s3c2410_wdt:
-tmr_margin: Watchdog tmr_margin in seconds. (default=15)
-tmr_atboot: Watchdog is started at boot time if set to 1, default=0
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
-soft_noboot: Watchdog action, set to 1 to ignore reboots, 0 to reboot
-debug: Watchdog debug, set to >1 for debug, (default 0)
--------------------------------------------------
-sa1100_wdt:
-margin: Watchdog margin in seconds (default 60s)
--------------------------------------------------
-sb_wdog:
-timeout: Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs)
--------------------------------------------------
-sbc60xxwdt:
-wdt_stop: SBC60xx WDT 'stop' io port (default 0x45)
-wdt_start: SBC60xx WDT 'start' io port (default 0x443)
-timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=30)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-sbc7240_wdt:
-timeout: Watchdog timeout in seconds. (1<=timeout<=255, default=30)
-nowayout: Disable watchdog when closing device file
--------------------------------------------------
-sbc8360:
-timeout: Index into timeout table (0-63) (default=27 (60s))
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-sbc_epx_c3:
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-sbc_fitpc2_wdt:
-margin: Watchdog margin in seconds (default 60s)
-nowayout: Watchdog cannot be stopped once started
--------------------------------------------------
-sbsa_gwdt:
-timeout: Watchdog timeout in seconds. (default 10s)
-action: Watchdog action at the first stage timeout,
-	set to 0 to ignore, 1 to panic. (default=0)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-sc1200wdt:
-isapnp: When set to 0 driver ISA PnP support will be disabled (default=1)
-io: io port
-timeout: range is 0-255 minutes, default is 1
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-sc520_wdt:
-timeout: Watchdog timeout in seconds. (1 <= timeout <= 3600, default=30)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-sch311x_wdt:
-force_id: Override the detected device ID
-therm_trip: Should a ThermTrip trigger the reset generator
-timeout: Watchdog timeout in seconds. 1<= timeout <=15300, default=60
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-scx200_wdt:
-margin: Watchdog margin in seconds
-nowayout: Disable watchdog shutdown on close
--------------------------------------------------
-shwdt:
-clock_division_ratio: Clock division ratio. Valid ranges are from 0x5 (1.31ms)
-	to 0x7 (5.25ms). (default=7)
-heartbeat: Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-smsc37b787_wdt:
-timeout: range is 1-255 units, default is 60
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-softdog:
-soft_margin: Watchdog soft_margin in seconds.
-	(0 < soft_margin < 65536, default=60)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
-soft_noboot: Softdog action, set to 1 to ignore reboots, 0 to reboot
-	(default=0)
--------------------------------------------------
-stmp3xxx_wdt:
-heartbeat: Watchdog heartbeat period in seconds from 1 to 4194304, default 19
--------------------------------------------------
-tegra_wdt:
-heartbeat: Watchdog heartbeats in seconds. (default = 120)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-ts72xx_wdt:
-timeout: Watchdog timeout in seconds. (1 <= timeout <= 8, default=8)
-nowayout: Disable watchdog shutdown on close
--------------------------------------------------
-twl4030_wdt:
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-txx9wdt:
-timeout: Watchdog timeout in seconds. (0<timeout<N, default=60)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-uniphier_wdt:
-timeout: Watchdog timeout in power of two seconds.
-	(1 <= timeout <= 128, default=64)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-w83627hf_wdt:
-wdt_io: w83627hf/thf WDT io port (default 0x2E)
-timeout: Watchdog timeout in seconds. 1 <= timeout <= 255, default=60.
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-w83877f_wdt:
-timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=30)
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-w83977f_wdt:
-timeout: Watchdog timeout in seconds (15..7635), default=45)
-testmode: Watchdog testmode (1 = no reboot), default=0
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-wafer5823wdt:
-timeout: Watchdog timeout in seconds. 1 <= timeout <= 255, default=60.
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-wdt285:
-soft_margin: Watchdog timeout in seconds (default=60)
--------------------------------------------------
-wdt977:
-timeout: Watchdog timeout in seconds (60..15300, default=60)
-testmode: Watchdog testmode (1 = no reboot), default=0
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-wm831x_wdt:
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-wm8350_wdt:
-nowayout: Watchdog cannot be stopped once started
-	(default=kernel config parameter)
--------------------------------------------------
-sun4v_wdt:
-timeout_ms: Watchdog timeout in milliseconds 1..180000, default=60000)
-nowayout: Watchdog cannot be stopped once started
--------------------------------------------------
diff --git a/Documentation/watchdog/watchdog-pm.txt b/Documentation/watchdog/watchdog-pm.rst
similarity index 92%
rename from Documentation/watchdog/watchdog-pm.txt
rename to Documentation/watchdog/watchdog-pm.rst
index 7a4dd46e0d24..646e1f28f31f 100644
--- a/Documentation/watchdog/watchdog-pm.txt
+++ b/Documentation/watchdog/watchdog-pm.rst
@@ -1,5 +1,7 @@
+===============================================
 The Linux WatchDog Timer Power Management Guide
 ===============================================
+
 Last reviewed: 17-Dec-2018
 
 Wolfram Sang <wsa+renesas@sang-engineering.com>
@@ -16,4 +18,5 @@ On resume, a watchdog timer shall be reset to its selected value to give
 userspace enough time to resume. [1] [2]
 
 [1] https://patchwork.kernel.org/patch/10252209/
+
 [2] https://patchwork.kernel.org/patch/10711625/
diff --git a/Documentation/watchdog/wdt.txt b/Documentation/watchdog/wdt.rst
similarity index 68%
rename from Documentation/watchdog/wdt.txt
rename to Documentation/watchdog/wdt.rst
index ed2f0b860869..d97b0361535b 100644
--- a/Documentation/watchdog/wdt.txt
+++ b/Documentation/watchdog/wdt.rst
@@ -1,11 +1,14 @@
+============================================================
+WDT Watchdog Timer Interfaces For The Linux Operating System
+============================================================
+
 Last Reviewed: 10/05/2007
 
-	WDT Watchdog Timer Interfaces For The Linux Operating System
-		Alan Cox <alan@lxorguk.ukuu.org.uk>
+Alan Cox <alan@lxorguk.ukuu.org.uk>
 
-	ICS	WDT501-P
-	ICS	WDT501-P (no fan tachometer)
-	ICS	WDT500-P
+	- ICS	WDT501-P
+	- ICS	WDT501-P (no fan tachometer)
+	- ICS	WDT500-P
 
 All the interfaces provide /dev/watchdog, which when open must be written
 to within a timeout or the machine will reboot. Each write delays the reboot
@@ -21,19 +24,26 @@ degrees Fahrenheit. Each read returns a single byte giving the temperature.
 The third interface logs kernel messages on additional alert events.
 
 The ICS ISA-bus wdt card cannot be safely probed for. Instead you need to
-pass IO address and IRQ boot parameters.  E.g.:
+pass IO address and IRQ boot parameters.  E.g.::
+
 	wdt.io=0x240 wdt.irq=11
 
 Other "wdt" driver parameters are:
+
+	===========	======================================================
 	heartbeat	Watchdog heartbeat in seconds (default 60)
 	nowayout	Watchdog cannot be stopped once started (kernel
-				build parameter)
+			build parameter)
 	tachometer	WDT501-P Fan Tachometer support (0=disable, default=0)
 	type		WDT501-P Card type (500 or 501, default=500)
+	===========	======================================================
 
 Features
 --------
-		WDT501P		WDT500P
+
+================   =======	   =======
+		   WDT501P	   WDT500P
+================   =======	   =======
 Reboot Timer	   X               X
 External Reboot	   X	           X
 I/O Port Monitor   o		   o
@@ -42,9 +52,12 @@ Fan Speed          X		   o
 Power Under	   X               o
 Power Over         X               o
 Overheat           X               o
+================   =======	   =======
 
 The external event interfaces on the WDT boards are not currently supported.
 Minor numbers are however allocated for it.
 
 
-Example Watchdog Driver:  see samples/watchdog/watchdog-simple.c
+Example Watchdog Driver:
+
+	see samples/watchdog/watchdog-simple.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 8dfa2fa5101a..24c52307361f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6944,7 +6944,7 @@ F:	drivers/media/usb/hdpvr/
 HEWLETT PACKARD ENTERPRISE ILO NMI WATCHDOG DRIVER
 M:	Jerry Hoemann <jerry.hoemann@hpe.com>
 S:	Supported
-F:	Documentation/watchdog/hpwdt.txt
+F:	Documentation/watchdog/hpwdt.rst
 F:	drivers/watchdog/hpwdt.c
 
 HEWLETT-PACKARD SMART ARRAY RAID DRIVER (hpsa)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 242eea859637..932b8227312f 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -17,7 +17,7 @@ menuconfig WATCHDOG
 	  reboot the machine) and a driver for hardware watchdog boards, which
 	  are more robust and can also keep track of the temperature inside
 	  your computer. For details, read
-	  <file:Documentation/watchdog/watchdog-api.txt> in the kernel source.
+	  <file:Documentation/watchdog/watchdog-api.rst> in the kernel source.
 
 	  The watchdog is usually used together with the watchdog daemon
 	  which is available from
@@ -1781,7 +1781,7 @@ config BOOKE_WDT
 	  Watchdog driver for PowerPC Book-E chips, such as the Freescale
 	  MPC85xx SOCs and the IBM PowerPC 440.
 
-	  Please see Documentation/watchdog/watchdog-api.txt for
+	  Please see Documentation/watchdog/watchdog-api.rst for
 	  more information.
 
 config BOOKE_WDT_DEFAULT_TIMEOUT
@@ -1930,7 +1930,7 @@ config PCWATCHDOG
 	  This card simply watches your kernel to make sure it doesn't freeze,
 	  and if it does, it reboots your computer after a certain amount of
 	  time. This driver is like the WDT501 driver but for different
-	  hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC
+	  hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.rst>. The PC
 	  watchdog cards can be ordered from <http://www.berkprod.com/>.
 
 	  To compile this driver as a module, choose M here: the
diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c
index c768dcd53034..790d23b76bcb 100644
--- a/drivers/watchdog/smsc37b787_wdt.c
+++ b/drivers/watchdog/smsc37b787_wdt.c
@@ -40,7 +40,7 @@
  *  mknod /dev/watchdog c 10 130
  *
  * For an example userspace keep-alive daemon, see:
- *   Documentation/watchdog/wdt.txt
+ *   Documentation/watchdog/wdt.rst
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 37/79] docs: xilinx: convert eemi.txt to eemi.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (34 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 36/79] docs: watchdog: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 38/79] docs: scheduler: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
                     ` (41 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Michal Simek, linux-arm-kernel

This is a very trivial conversion: adjust the title markup
and add a few literal block markups to produce a better
visual when parsed and avoid warnings.

As newer documents related to xilinx could be added in the future,
create a new index file for it.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/xilinx/{eemi.txt => eemi.rst} |  8 ++++----
 Documentation/xilinx/index.rst              | 17 +++++++++++++++++
 2 files changed, 21 insertions(+), 4 deletions(-)
 rename Documentation/xilinx/{eemi.txt => eemi.rst} (92%)
 create mode 100644 Documentation/xilinx/index.rst

diff --git a/Documentation/xilinx/eemi.txt b/Documentation/xilinx/eemi.rst
similarity index 92%
rename from Documentation/xilinx/eemi.txt
rename to Documentation/xilinx/eemi.rst
index 0ab686c173be..8ca82c782ba6 100644
--- a/Documentation/xilinx/eemi.txt
+++ b/Documentation/xilinx/eemi.rst
@@ -1,6 +1,6 @@
----------------------------------------------------------------------
+====================================
 Xilinx Zynq MPSoC EEMI Documentation
----------------------------------------------------------------------
+====================================
 
 Xilinx Zynq MPSoC Firmware Interface
 -------------------------------------
@@ -21,7 +21,7 @@ The zynqmp-firmware driver maintain all EEMI APIs in zynqmp_eemi_ops
 structure. Any driver who want to communicate with PMC using EEMI APIs
 can call zynqmp_pm_get_eemi_ops().
 
-Example of EEMI ops:
+Example of EEMI ops::
 
 	/* zynqmp-firmware driver maintain all EEMI APIs */
 	struct zynqmp_eemi_ops {
@@ -34,7 +34,7 @@ Example of EEMI ops:
 		.query_data = zynqmp_pm_query_data,
 	};
 
-Example of EEMI ops usage:
+Example of EEMI ops usage::
 
 	static const struct zynqmp_eemi_ops *eemi_ops;
 	u32 ret_payload[PAYLOAD_ARG_CNT];
diff --git a/Documentation/xilinx/index.rst b/Documentation/xilinx/index.rst
new file mode 100644
index 000000000000..01cc1a0714df
--- /dev/null
+++ b/Documentation/xilinx/index.rst
@@ -0,0 +1,17 @@
+:orphan:
+
+===========
+Xilinx FPGA
+===========
+
+.. toctree::
+    :maxdepth: 1
+
+    eemi
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 38/79] docs: scheduler: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (35 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 37/79] docs: xilinx: convert eemi.txt to eemi.rst Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-23  8:29     ` Peter Zijlstra
  2019-04-22 13:27   ` [PATCH v2 39/79] docs: EDID/HOWTO.txt: convert it and rename to howto.rst Mauro Carvalho Chehab
                     ` (40 subsequent siblings)
  77 siblings, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Ingo Molnar, Peter Zijlstra

In order to prepare to add them to the Kernel API book,
convert the files to ReST format.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/ABI/testing/sysfs-kernel-uids   |   2 +-
 .../{completion.txt => completion.rst}        |  38 +--
 Documentation/scheduler/index.rst             |  29 ++
 .../{sched-arch.txt => sched-arch.rst}        |  18 +-
 .../{sched-bwc.txt => sched-bwc.rst}          |  30 +-
 ...{sched-deadline.txt => sched-deadline.rst} | 295 +++++++++---------
 ...ed-design-CFS.txt => sched-design-CFS.rst} |  15 +-
 .../{sched-domains.txt => sched-domains.rst}  |   8 +-
 .../{sched-energy.txt => sched-energy.rst}    |  47 +--
 ...-nice-design.txt => sched-nice-design.rst} |   6 +-
 ...{sched-rt-group.txt => sched-rt-group.rst} |  28 +-
 .../{sched-stats.txt => sched-stats.rst}      |  35 ++-
 Documentation/scheduler/text_files.rst        |   5 +
 Documentation/vm/numa.rst                     |   2 +-
 init/Kconfig                                  |   6 +-
 kernel/sched/deadline.c                       |   2 +-
 16 files changed, 332 insertions(+), 234 deletions(-)
 rename Documentation/scheduler/{completion.txt => completion.rst} (94%)
 create mode 100644 Documentation/scheduler/index.rst
 rename Documentation/scheduler/{sched-arch.txt => sched-arch.rst} (81%)
 rename Documentation/scheduler/{sched-bwc.txt => sched-bwc.rst} (90%)
 rename Documentation/scheduler/{sched-deadline.txt => sched-deadline.rst} (88%)
 rename Documentation/scheduler/{sched-design-CFS.txt => sched-design-CFS.rst} (97%)
 rename Documentation/scheduler/{sched-domains.txt => sched-domains.rst} (97%)
 rename Documentation/scheduler/{sched-energy.txt => sched-energy.rst} (96%)
 rename Documentation/scheduler/{sched-nice-design.txt => sched-nice-design.rst} (98%)
 rename Documentation/scheduler/{sched-rt-group.txt => sched-rt-group.rst} (95%)
 rename Documentation/scheduler/{sched-stats.txt => sched-stats.rst} (91%)
 create mode 100644 Documentation/scheduler/text_files.rst

diff --git a/Documentation/ABI/testing/sysfs-kernel-uids b/Documentation/ABI/testing/sysfs-kernel-uids
index 28f14695a852..4182b7061816 100644
--- a/Documentation/ABI/testing/sysfs-kernel-uids
+++ b/Documentation/ABI/testing/sysfs-kernel-uids
@@ -11,4 +11,4 @@ Description:
 		example would be, if User A has shares = 1024 and user
 		B has shares = 2048, User B will get twice the CPU
 		bandwidth user A will. For more details refer
-		Documentation/scheduler/sched-design-CFS.txt
+		Documentation/scheduler/sched-design-CFS.rst
diff --git a/Documentation/scheduler/completion.txt b/Documentation/scheduler/completion.rst
similarity index 94%
rename from Documentation/scheduler/completion.txt
rename to Documentation/scheduler/completion.rst
index e5b9df4d8078..9f039b4f4b09 100644
--- a/Documentation/scheduler/completion.txt
+++ b/Documentation/scheduler/completion.rst
@@ -1,3 +1,4 @@
+================================================
 Completions - "wait for completion" barrier APIs
 ================================================
 
@@ -46,7 +47,7 @@ it has to wait for it.
 
 To use completions you need to #include <linux/completion.h> and
 create a static or dynamic variable of type 'struct completion',
-which has only two fields:
+which has only two fields::
 
 	struct completion {
 		unsigned int done;
@@ -57,7 +58,7 @@ This provides the ->wait waitqueue to place tasks on for waiting (if any), and
 the ->done completion flag for indicating whether it's completed or not.
 
 Completions should be named to refer to the event that is being synchronized on.
-A good example is:
+A good example is::
 
 	wait_for_completion(&early_console_added);
 
@@ -81,7 +82,7 @@ have taken place, even if these wait functions return prematurely due to a timeo
 or a signal triggering.
 
 Initializing of dynamically allocated completion objects is done via a call to
-init_completion():
+init_completion()::
 
 	init_completion(&dynamic_object->done);
 
@@ -100,7 +101,8 @@ but be aware of other races.
 
 For static declaration and initialization, macros are available.
 
-For static (or global) declarations in file scope you can use DECLARE_COMPLETION():
+For static (or global) declarations in file scope you can use
+DECLARE_COMPLETION()::
 
 	static DECLARE_COMPLETION(setup_done);
 	DECLARE_COMPLETION(setup_done);
@@ -111,7 +113,7 @@ initialized to 'not done' and doesn't require an init_completion() call.
 When a completion is declared as a local variable within a function,
 then the initialization should always use DECLARE_COMPLETION_ONSTACK()
 explicitly, not just to make lockdep happy, but also to make it clear
-that limited scope had been considered and is intentional:
+that limited scope had been considered and is intentional::
 
 	DECLARE_COMPLETION_ONSTACK(setup_done)
 
@@ -140,11 +142,11 @@ Waiting for completions:
 ------------------------
 
 For a thread to wait for some concurrent activity to finish, it
-calls wait_for_completion() on the initialized completion structure:
+calls wait_for_completion() on the initialized completion structure::
 
 	void wait_for_completion(struct completion *done)
 
-A typical usage scenario is:
+A typical usage scenario is::
 
 	CPU#1					CPU#2
 
@@ -192,17 +194,17 @@ A common problem that occurs is to have unclean assignment of return types,
 so take care to assign return-values to variables of the proper type.
 
 Checking for the specific meaning of return values also has been found
-to be quite inaccurate, e.g. constructs like:
+to be quite inaccurate, e.g. constructs like::
 
 	if (!wait_for_completion_interruptible_timeout(...))
 
 ... would execute the same code path for successful completion and for the
-interrupted case - which is probably not what you want.
+interrupted case - which is probably not what you want::
 
 	int wait_for_completion_interruptible(struct completion *done)
 
 This function marks the task TASK_INTERRUPTIBLE while it is waiting.
-If a signal was received while waiting it will return -ERESTARTSYS; 0 otherwise.
+If a signal was received while waiting it will return -ERESTARTSYS; 0 otherwise::
 
 	unsigned long wait_for_completion_timeout(struct completion *done, unsigned long timeout)
 
@@ -214,7 +216,7 @@ Timeouts are preferably calculated with msecs_to_jiffies() or usecs_to_jiffies()
 to make the code largely HZ-invariant.
 
 If the returned timeout value is deliberately ignored a comment should probably explain
-why (e.g. see drivers/mfd/wm8350-core.c wm8350_read_auxadc()).
+why (e.g. see drivers/mfd/wm8350-core.c wm8350_read_auxadc())::
 
 	long wait_for_completion_interruptible_timeout(struct completion *done, unsigned long timeout)
 
@@ -225,14 +227,14 @@ jiffies if completion occurred.
 
 Further variants include _killable which uses TASK_KILLABLE as the
 designated tasks state and will return -ERESTARTSYS if it is interrupted,
-or 0 if completion was achieved.  There is a _timeout variant as well:
+or 0 if completion was achieved.  There is a _timeout variant as well::
 
 	long wait_for_completion_killable(struct completion *done)
 	long wait_for_completion_killable_timeout(struct completion *done, unsigned long timeout)
 
 The _io variants wait_for_completion_io() behave the same as the non-_io
 variants, except for accounting waiting time as 'waiting on IO', which has
-an impact on how the task is accounted in scheduling/IO stats:
+an impact on how the task is accounted in scheduling/IO stats::
 
 	void wait_for_completion_io(struct completion *done)
 	unsigned long wait_for_completion_io_timeout(struct completion *done, unsigned long timeout)
@@ -243,11 +245,11 @@ Signaling completions:
 
 A thread that wants to signal that the conditions for continuation have been
 achieved calls complete() to signal exactly one of the waiters that it can
-continue:
+continue::
 
 	void complete(struct completion *done)
 
-... or calls complete_all() to signal all current and future waiters:
+... or calls complete_all() to signal all current and future waiters::
 
 	void complete_all(struct completion *done)
 
@@ -268,7 +270,7 @@ probably are a design bug.
 
 Signaling completion from IRQ context is fine as it will appropriately
 lock with spin_lock_irqsave()/spin_unlock_irqrestore() and it will never
-sleep. 
+sleep.
 
 
 try_wait_for_completion()/completion_done():
@@ -276,14 +278,14 @@ try_wait_for_completion()/completion_done():
 
 The try_wait_for_completion() function will not put the thread on the wait
 queue but rather returns false if it would need to enqueue (block) the thread,
-else it consumes one posted completion and returns true.
+else it consumes one posted completion and returns true::
 
 	bool try_wait_for_completion(struct completion *done)
 
 Finally, to check the state of a completion without changing it in any way,
 call completion_done(), which returns false if there are no posted
 completions that were not yet consumed by waiters (implying that there are
-waiters) and true otherwise;
+waiters) and true otherwise::
 
 	bool completion_done(struct completion *done)
 
diff --git a/Documentation/scheduler/index.rst b/Documentation/scheduler/index.rst
new file mode 100644
index 000000000000..058be77a4c34
--- /dev/null
+++ b/Documentation/scheduler/index.rst
@@ -0,0 +1,29 @@
+:orphan:
+
+===============
+Linux Scheduler
+===============
+
+.. toctree::
+    :maxdepth: 1
+
+
+    completion
+    sched-arch
+    sched-bwc
+    sched-deadline
+    sched-design-CFS
+    sched-domains
+    sched-energy
+    sched-nice-design
+    sched-rt-group
+    sched-stats
+
+    text_files
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/scheduler/sched-arch.txt b/Documentation/scheduler/sched-arch.rst
similarity index 81%
rename from Documentation/scheduler/sched-arch.txt
rename to Documentation/scheduler/sched-arch.rst
index a2f27bbf2cba..0eaec669790a 100644
--- a/Documentation/scheduler/sched-arch.txt
+++ b/Documentation/scheduler/sched-arch.rst
@@ -1,4 +1,6 @@
-	CPU Scheduler implementation hints for architecture specific code
+=================================================================
+CPU Scheduler implementation hints for architecture specific code
+=================================================================
 
 	Nick Piggin, 2005
 
@@ -35,9 +37,10 @@ Your cpu_idle routines need to obey the following rules:
 4. The only time interrupts need to be disabled when checking
    need_resched is if we are about to sleep the processor until
    the next interrupt (this doesn't provide any protection of
-   need_resched, it prevents losing an interrupt).
+   need_resched, it prevents losing an interrupt):
+
+	4a. Common problem with this type of sleep appears to be::
 
-	4a. Common problem with this type of sleep appears to be:
 	        local_irq_disable();
 	        if (!need_resched()) {
 	                local_irq_enable();
@@ -51,10 +54,10 @@ Your cpu_idle routines need to obey the following rules:
    although it may be reasonable to do some background work or enter
    a low CPU priority.
 
-   	5a. If TIF_POLLING_NRFLAG is set, and we do decide to enter
-	    an interrupt sleep, it needs to be cleared then a memory
-	    barrier issued (followed by a test of need_resched with
-	    interrupts disabled, as explained in 3).
+      - 5a. If TIF_POLLING_NRFLAG is set, and we do decide to enter
+	an interrupt sleep, it needs to be cleared then a memory
+	barrier issued (followed by a test of need_resched with
+	interrupts disabled, as explained in 3).
 
 arch/x86/kernel/process.c has examples of both polling and
 sleeping idle functions.
@@ -71,4 +74,3 @@ sh64 - Is sleeping racy vs interrupts? (See #4a)
 
 sparc - IRQs on at this point(?), change local_irq_save to _disable.
       - TODO: needs secondary CPUs to disable preempt (See #1)
-
diff --git a/Documentation/scheduler/sched-bwc.txt b/Documentation/scheduler/sched-bwc.rst
similarity index 90%
rename from Documentation/scheduler/sched-bwc.txt
rename to Documentation/scheduler/sched-bwc.rst
index f6b1873f68ab..3a9064219656 100644
--- a/Documentation/scheduler/sched-bwc.txt
+++ b/Documentation/scheduler/sched-bwc.rst
@@ -1,8 +1,9 @@
+=====================
 CFS Bandwidth Control
 =====================
 
 [ This document only discusses CPU bandwidth control for SCHED_NORMAL.
-  The SCHED_RT case is covered in Documentation/scheduler/sched-rt-group.txt ]
+  The SCHED_RT case is covered in Documentation/scheduler/sched-rt-group.rst ]
 
 CFS bandwidth control is a CONFIG_FAIR_GROUP_SCHED extension which allows the
 specification of the maximum CPU bandwidth available to a group or hierarchy.
@@ -27,7 +28,8 @@ cpu.cfs_quota_us: the total available run-time within a period (in microseconds)
 cpu.cfs_period_us: the length of a period (in microseconds)
 cpu.stat: exports throttling statistics [explained further below]
 
-The default values are:
+The default values are::
+
 	cpu.cfs_period_us=100ms
 	cpu.cfs_quota=-1
 
@@ -55,7 +57,8 @@ For efficiency run-time is transferred between the global pool and CPU local
 on large systems.  The amount transferred each time such an update is required
 is described as the "slice".
 
-This is tunable via procfs:
+This is tunable via procfs::
+
 	/proc/sys/kernel/sched_cfs_bandwidth_slice_us (default=5ms)
 
 Larger slice values will reduce transfer overheads, while smaller values allow
@@ -66,6 +69,7 @@ Statistics
 A group's bandwidth statistics are exported via 3 fields in cpu.stat.
 
 cpu.stat:
+
 - nr_periods: Number of enforcement intervals that have elapsed.
 - nr_throttled: Number of times the group has been throttled/limited.
 - throttled_time: The total time duration (in nanoseconds) for which entities
@@ -78,12 +82,15 @@ Hierarchical considerations
 The interface enforces that an individual entity's bandwidth is always
 attainable, that is: max(c_i) <= C. However, over-subscription in the
 aggregate case is explicitly allowed to enable work-conserving semantics
-within a hierarchy.
+within a hierarchy:
+
   e.g. \Sum (c_i) may exceed C
+
 [ Where C is the parent's bandwidth, and c_i its children ]
 
 
 There are two ways in which a group may become throttled:
+
 	a. it fully consumes its own quota within a period
 	b. a parent's quota is fully consumed within its period
 
@@ -92,7 +99,7 @@ be allowed to until the parent's runtime is refreshed.
 
 Examples
 --------
-1. Limit a group to 1 CPU worth of runtime.
+1. Limit a group to 1 CPU worth of runtime::
 
 	If period is 250ms and quota is also 250ms, the group will get
 	1 CPU worth of runtime every 250ms.
@@ -100,10 +107,10 @@ Examples
 	# echo 250000 > cpu.cfs_quota_us /* quota = 250ms */
 	# echo 250000 > cpu.cfs_period_us /* period = 250ms */
 
-2. Limit a group to 2 CPUs worth of runtime on a multi-CPU machine.
+2. Limit a group to 2 CPUs worth of runtime on a multi-CPU machine
 
-	With 500ms period and 1000ms quota, the group can get 2 CPUs worth of
-	runtime every 500ms.
+   With 500ms period and 1000ms quota, the group can get 2 CPUs worth of
+   runtime every 500ms::
 
 	# echo 1000000 > cpu.cfs_quota_us /* quota = 1000ms */
 	# echo 500000 > cpu.cfs_period_us /* period = 500ms */
@@ -112,11 +119,10 @@ Examples
 
 3. Limit a group to 20% of 1 CPU.
 
-	With 50ms period, 10ms quota will be equivalent to 20% of 1 CPU.
+   With 50ms period, 10ms quota will be equivalent to 20% of 1 CPU::
 
 	# echo 10000 > cpu.cfs_quota_us /* quota = 10ms */
 	# echo 50000 > cpu.cfs_period_us /* period = 50ms */
 
-	By using a small period here we are ensuring a consistent latency
-	response at the expense of burst capacity.
-
+   By using a small period here we are ensuring a consistent latency
+   response at the expense of burst capacity.
diff --git a/Documentation/scheduler/sched-deadline.txt b/Documentation/scheduler/sched-deadline.rst
similarity index 88%
rename from Documentation/scheduler/sched-deadline.txt
rename to Documentation/scheduler/sched-deadline.rst
index a7514343b660..3391e86d810c 100644
--- a/Documentation/scheduler/sched-deadline.txt
+++ b/Documentation/scheduler/sched-deadline.rst
@@ -1,29 +1,29 @@
-			  Deadline Task Scheduling
-			  ------------------------
+========================
+Deadline Task Scheduling
+========================
 
-CONTENTS
-========
+.. CONTENTS
 
- 0. WARNING
- 1. Overview
- 2. Scheduling algorithm
-   2.1 Main algorithm
-   2.2 Bandwidth reclaiming
- 3. Scheduling Real-Time Tasks
-   3.1 Definitions
-   3.2 Schedulability Analysis for Uniprocessor Systems
-   3.3 Schedulability Analysis for Multiprocessor Systems
-   3.4 Relationship with SCHED_DEADLINE Parameters
- 4. Bandwidth management
-   4.1 System-wide settings
-   4.2 Task interface
-   4.3 Default behavior
-   4.4 Behavior of sched_yield()
- 5. Tasks CPU affinity
-   5.1 SCHED_DEADLINE and cpusets HOWTO
- 6. Future plans
- A. Test suite
- B. Minimal main()
+    0. WARNING
+    1. Overview
+    2. Scheduling algorithm
+      2.1 Main algorithm
+      2.2 Bandwidth reclaiming
+    3. Scheduling Real-Time Tasks
+      3.1 Definitions
+      3.2 Schedulability Analysis for Uniprocessor Systems
+      3.3 Schedulability Analysis for Multiprocessor Systems
+      3.4 Relationship with SCHED_DEADLINE Parameters
+    4. Bandwidth management
+      4.1 System-wide settings
+      4.2 Task interface
+      4.3 Default behavior
+      4.4 Behavior of sched_yield()
+    5. Tasks CPU affinity
+      5.1 SCHED_DEADLINE and cpusets HOWTO
+    6. Future plans
+    A. Test suite
+    B. Minimal main()
 
 
 0. WARNING
@@ -44,7 +44,7 @@ CONTENTS
 
 
 2. Scheduling algorithm
-==================
+=======================
 
 2.1 Main algorithm
 ------------------
@@ -80,7 +80,7 @@ CONTENTS
     a "remaining runtime". These two parameters are initially set to 0;
 
   - When a SCHED_DEADLINE task wakes up (becomes ready for execution),
-    the scheduler checks if
+    the scheduler checks if::
 
                  remaining runtime                  runtime
         ----------------------------------    >    ---------
@@ -97,7 +97,7 @@ CONTENTS
     left unchanged;
 
   - When a SCHED_DEADLINE task executes for an amount of time t, its
-    remaining runtime is decreased as
+    remaining runtime is decreased as::
 
          remaining runtime = remaining runtime - t
 
@@ -112,7 +112,7 @@ CONTENTS
 
   - When the current time is equal to the replenishment time of a
     throttled task, the scheduling deadline and the remaining runtime are
-    updated as
+    updated as::
 
          scheduling deadline = scheduling deadline + period
          remaining runtime = remaining runtime + runtime
@@ -129,7 +129,7 @@ CONTENTS
  Reclamation of Unused Bandwidth) algorithm [15, 16, 17] and it is enabled
  when flag SCHED_FLAG_RECLAIM is set.
 
- The following diagram illustrates the state names for tasks handled by GRUB:
+ The following diagram illustrates the state names for tasks handled by GRUB::
 
                              ------------
                  (d)        |   Active   |
@@ -168,7 +168,7 @@ CONTENTS
       breaking the real-time guarantees.
 
       The 0-lag time for a task entering the ActiveNonContending state is
-      computed as
+      computed as::
 
                         (runtime * dl_period)
              deadline - ---------------------
@@ -183,7 +183,7 @@ CONTENTS
       the task's utilization must be removed from the previous runqueue's active
       utilization and must be added to the new runqueue's active utilization.
       In order to avoid races between a task waking up on a runqueue while the
-       "inactive timer" is running on a different CPU, the "dl_non_contending"
+      "inactive timer" is running on a different CPU, the "dl_non_contending"
       flag is used to indicate that a task is not on a runqueue but is active
       (so, the flag is set when the task blocks and is cleared when the
       "inactive timer" fires or when the task  wakes up).
@@ -222,36 +222,36 @@ CONTENTS
 
 
  Let's now see a trivial example of two deadline tasks with runtime equal
- to 4 and period equal to 8 (i.e., bandwidth equal to 0.5):
+ to 4 and period equal to 8 (i.e., bandwidth equal to 0.5)::
 
-     A            Task T1
-     |
-     |                               |
-     |                               |
-     |--------                       |----
-     |       |                       V
-     |---|---|---|---|---|---|---|---|--------->t
-     0   1   2   3   4   5   6   7   8
+         A            Task T1
+         |
+         |                               |
+         |                               |
+         |--------                       |----
+         |       |                       V
+         |---|---|---|---|---|---|---|---|--------->t
+         0   1   2   3   4   5   6   7   8
 
 
-     A            Task T2
-     |
-     |                               |
-     |                               |
-     |       ------------------------|
-     |       |                       V
-     |---|---|---|---|---|---|---|---|--------->t
-     0   1   2   3   4   5   6   7   8
+         A            Task T2
+         |
+         |                               |
+         |                               |
+         |       ------------------------|
+         |       |                       V
+         |---|---|---|---|---|---|---|---|--------->t
+         0   1   2   3   4   5   6   7   8
 
 
-     A            running_bw
-     |
-   1 -----------------               ------
-     |               |               |
-  0.5-               -----------------
-     |                               |
-     |---|---|---|---|---|---|---|---|--------->t
-     0   1   2   3   4   5   6   7   8
+         A            running_bw
+         |
+       1 -----------------               ------
+         |               |               |
+      0.5-               -----------------
+         |                               |
+         |---|---|---|---|---|---|---|---|--------->t
+         0   1   2   3   4   5   6   7   8
 
 
   - Time t = 0:
@@ -284,7 +284,7 @@ CONTENTS
 
 
 2.3 Energy-aware scheduling
-------------------------
+---------------------------
 
  When cpufreq's schedutil governor is selected, SCHED_DEADLINE implements the
  GRUB-PA [19] algorithm, reducing the CPU operating frequency to the minimum
@@ -299,15 +299,20 @@ CONTENTS
 3. Scheduling Real-Time Tasks
 =============================
 
- * BIG FAT WARNING ******************************************************
- *
- * This section contains a (not-thorough) summary on classical deadline
- * scheduling theory, and how it applies to SCHED_DEADLINE.
- * The reader can "safely" skip to Section 4 if only interested in seeing
- * how the scheduling policy can be used. Anyway, we strongly recommend
- * to come back here and continue reading (once the urge for testing is
- * satisfied :P) to be sure of fully understanding all technical details.
- ************************************************************************
+
+
+ ..  BIG FAT WARNING ******************************************************
+
+ .. warning::
+
+   This section contains a (not-thorough) summary on classical deadline
+   scheduling theory, and how it applies to SCHED_DEADLINE.
+   The reader can "safely" skip to Section 4 if only interested in seeing
+   how the scheduling policy can be used. Anyway, we strongly recommend
+   to come back here and continue reading (once the urge for testing is
+   satisfied :P) to be sure of fully understanding all technical details.
+
+ .. ************************************************************************
 
  There are no limitations on what kind of task can exploit this new
  scheduling discipline, even if it must be said that it is particularly
@@ -329,6 +334,7 @@ CONTENTS
  sporadic with minimum inter-arrival time P is r_{j+1} >= r_j + P. Finally,
  d_j = r_j + D, where D is the task's relative deadline.
  Summing up, a real-time task can be described as
+
 	Task = (WCET, D, P)
 
  The utilization of a real-time task is defined as the ratio between its
@@ -352,13 +358,15 @@ CONTENTS
  between the finishing time of a job and its absolute deadline).
  More precisely, it can be proven that using a global EDF scheduler the
  maximum tardiness of each task is smaller or equal than
+
 	((M − 1) · WCET_max − WCET_min)/(M − (M − 2) · U_max) + WCET_max
+
  where WCET_max = max{WCET_i} is the maximum WCET, WCET_min=min{WCET_i}
  is the minimum WCET, and U_max = max{WCET_i/P_i} is the maximum
  utilization[12].
 
 3.2 Schedulability Analysis for Uniprocessor Systems
-------------------------
+----------------------------------------------------
 
  If M=1 (uniprocessor system), or in case of partitioned scheduling (each
  real-time task is statically assigned to one and only one CPU), it is
@@ -370,7 +378,9 @@ CONTENTS
  a task as WCET_i/min{D_i,P_i}, and EDF is able to respect all the deadlines
  of all the tasks running on a CPU if the sum of the densities of the tasks
  running on such a CPU is smaller or equal than 1:
+
 	sum(WCET_i / min{D_i, P_i}) <= 1
+
  It is important to notice that this condition is only sufficient, and not
  necessary: there are task sets that are schedulable, but do not respect the
  condition. For example, consider the task set {Task_1,Task_2} composed by
@@ -379,7 +389,9 @@ CONTENTS
  (Task_1 is scheduled as soon as it is released, and finishes just in time
  to respect its deadline; Task_2 is scheduled immediately after Task_1, hence
  its response time cannot be larger than 50ms + 10ms = 60ms) even if
+
 	50 / min{50,100} + 10 / min{100, 100} = 50 / 50 + 10 / 100 = 1.1
+
  Of course it is possible to test the exact schedulability of tasks with
  D_i != P_i (checking a condition that is both sufficient and necessary),
  but this cannot be done by comparing the total utilization or density with
@@ -399,7 +411,7 @@ CONTENTS
  4 Linux uses an admission test based on the tasks' utilizations.
 
 3.3 Schedulability Analysis for Multiprocessor Systems
-------------------------
+------------------------------------------------------
 
  On multiprocessor systems with global EDF scheduling (non partitioned
  systems), a sufficient test for schedulability can not be based on the
@@ -428,7 +440,9 @@ CONTENTS
  between total utilization (or density) and a fixed constant. If all tasks
  have D_i = P_i, a sufficient schedulability condition can be expressed in
  a simple way:
+
 	sum(WCET_i / P_i) <= M - (M - 1) · U_max
+
  where U_max = max{WCET_i / P_i}[10]. Notice that for U_max = 1,
  M - (M - 1) · U_max becomes M - M + 1 = 1 and this schedulability condition
  just confirms the Dhall's effect. A more complete survey of the literature
@@ -447,7 +461,7 @@ CONTENTS
  the tasks are limited.
 
 3.4 Relationship with SCHED_DEADLINE Parameters
-------------------------
+-----------------------------------------------
 
  Finally, it is important to understand the relationship between the
  SCHED_DEADLINE scheduling parameters described in Section 2 (runtime,
@@ -473,6 +487,7 @@ CONTENTS
  this task, as it is not possible to respect its temporal constraints.
 
  References:
+
   1 - C. L. Liu and J. W. Layland. Scheduling algorithms for multiprogram-
       ming in a hard-real-time environment. Journal of the Association for
       Computing Machinery, 20(1), 1973.
@@ -550,7 +565,7 @@ CONTENTS
  The interface used to control the CPU bandwidth that can be allocated
  to -deadline tasks is similar to the one already used for -rt
  tasks with real-time group scheduling (a.k.a. RT-throttling - see
- Documentation/scheduler/sched-rt-group.txt), and is based on readable/
+ Documentation/scheduler/sched-rt-group.rst), and is based on readable/
  writable control files located in procfs (for system wide settings).
  Notice that per-group settings (controlled through cgroupfs) are still not
  defined for -deadline tasks, because more discussion is needed in order to
@@ -596,11 +611,13 @@ CONTENTS
  Specifying a periodic/sporadic task that executes for a given amount of
  runtime at each instance, and that is scheduled according to the urgency of
  its own timing constraints needs, in general, a way of declaring:
+
   - a (maximum/typical) instance execution time,
   - a minimum interval between consecutive instances,
   - a time constraint by which each instance must be completed.
 
  Therefore:
+
   * a new struct sched_attr, containing all the necessary fields is
     provided;
   * the new scheduling related syscalls that manipulate it, i.e.,
@@ -658,21 +675,21 @@ CONTENTS
 ------------------------------------
 
  An example of a simple configuration (pin a -deadline task to CPU0)
- follows (rt-app is used to create a -deadline task).
+ follows (rt-app is used to create a -deadline task)::
 
- mkdir /dev/cpuset
- mount -t cgroup -o cpuset cpuset /dev/cpuset
- cd /dev/cpuset
- mkdir cpu0
- echo 0 > cpu0/cpuset.cpus
- echo 0 > cpu0/cpuset.mems
- echo 1 > cpuset.cpu_exclusive
- echo 0 > cpuset.sched_load_balance
- echo 1 > cpu0/cpuset.cpu_exclusive
- echo 1 > cpu0/cpuset.mem_exclusive
- echo $$ > cpu0/tasks
- rt-app -t 100000:10000:d:0 -D5 (it is now actually superfluous to specify
- task affinity)
+   mkdir /dev/cpuset
+   mount -t cgroup -o cpuset cpuset /dev/cpuset
+   cd /dev/cpuset
+   mkdir cpu0
+   echo 0 > cpu0/cpuset.cpus
+   echo 0 > cpu0/cpuset.mems
+   echo 1 > cpuset.cpu_exclusive
+   echo 0 > cpuset.sched_load_balance
+   echo 1 > cpu0/cpuset.cpu_exclusive
+   echo 1 > cpu0/cpuset.mem_exclusive
+   echo $$ > cpu0/tasks
+   rt-app -t 100000:10000:d:0 -D5 # it is now actually superfluous to specify
+				  # task affinity
 
 6. Future plans
 ===============
@@ -711,7 +728,7 @@ Appendix A. Test suite
  rt-app is available at: https://github.com/scheduler-tools/rt-app.
 
  Thread parameters can be specified from the command line, with something like
- this:
+ this::
 
   # rt-app -t 100000:10000:d -t 150000:20000:f:10 -D5
 
@@ -721,27 +738,27 @@ Appendix A. Test suite
  of 5 seconds.
 
  More interestingly, configurations can be described with a json file that
- can be passed as input to rt-app with something like this:
+ can be passed as input to rt-app with something like this::
 
   # rt-app my_config.json
 
  The parameters that can be specified with the second method are a superset
  of the command line options. Please refer to rt-app documentation for more
- details (<rt-app-sources>/doc/*.json).
+ details (`<rt-app-sources>/doc/*.json`).
 
  The second testing application is a modification of schedtool, called
  schedtool-dl, which can be used to setup SCHED_DEADLINE parameters for a
  certain pid/application. schedtool-dl is available at:
  https://github.com/scheduler-tools/schedtool-dl.git.
 
- The usage is straightforward:
+ The usage is straightforward::
 
   # schedtool -E -t 10000000:100000000 -e ./my_cpuhog_app
 
  With this, my_cpuhog_app is put to run inside a SCHED_DEADLINE reservation
  of 10ms every 100ms (note that parameters are expressed in microseconds).
  You can also use schedtool to create a reservation for an already running
- application, given that you know its pid:
+ application, given that you know its pid::
 
   # schedtool -E -t 10000000:100000000 my_app_pid
 
@@ -750,43 +767,43 @@ Appendix B. Minimal main()
 
  We provide in what follows a simple (ugly) self-contained code snippet
  showing how SCHED_DEADLINE reservations can be created by a real-time
- application developer.
-
- #define _GNU_SOURCE
- #include <unistd.h>
- #include <stdio.h>
- #include <stdlib.h>
- #include <string.h>
- #include <time.h>
- #include <linux/unistd.h>
- #include <linux/kernel.h>
- #include <linux/types.h>
- #include <sys/syscall.h>
- #include <pthread.h>
-
- #define gettid() syscall(__NR_gettid)
-
- #define SCHED_DEADLINE	6
-
- /* XXX use the proper syscall numbers */
- #ifdef __x86_64__
- #define __NR_sched_setattr		314
- #define __NR_sched_getattr		315
- #endif
-
- #ifdef __i386__
- #define __NR_sched_setattr		351
- #define __NR_sched_getattr		352
- #endif
-
- #ifdef __arm__
- #define __NR_sched_setattr		380
- #define __NR_sched_getattr		381
- #endif
-
- static volatile int done;
-
- struct sched_attr {
+ application developer::
+
+   #define _GNU_SOURCE
+   #include <unistd.h>
+   #include <stdio.h>
+   #include <stdlib.h>
+   #include <string.h>
+   #include <time.h>
+   #include <linux/unistd.h>
+   #include <linux/kernel.h>
+   #include <linux/types.h>
+   #include <sys/syscall.h>
+   #include <pthread.h>
+
+   #define gettid() syscall(__NR_gettid)
+
+   #define SCHED_DEADLINE	6
+
+   /* XXX use the proper syscall numbers */
+   #ifdef __x86_64__
+   #define __NR_sched_setattr		314
+   #define __NR_sched_getattr		315
+   #endif
+
+   #ifdef __i386__
+   #define __NR_sched_setattr		351
+   #define __NR_sched_getattr		352
+   #endif
+
+   #ifdef __arm__
+   #define __NR_sched_setattr		380
+   #define __NR_sched_getattr		381
+   #endif
+
+   static volatile int done;
+
+   struct sched_attr {
 	__u32 size;
 
 	__u32 sched_policy;
@@ -802,25 +819,25 @@ Appendix B. Minimal main()
 	__u64 sched_runtime;
 	__u64 sched_deadline;
 	__u64 sched_period;
- };
+   };
 
- int sched_setattr(pid_t pid,
+   int sched_setattr(pid_t pid,
 		  const struct sched_attr *attr,
 		  unsigned int flags)
- {
+   {
 	return syscall(__NR_sched_setattr, pid, attr, flags);
- }
+   }
 
- int sched_getattr(pid_t pid,
+   int sched_getattr(pid_t pid,
 		  struct sched_attr *attr,
 		  unsigned int size,
 		  unsigned int flags)
- {
+   {
 	return syscall(__NR_sched_getattr, pid, attr, size, flags);
- }
+   }
 
- void *run_deadline(void *data)
- {
+   void *run_deadline(void *data)
+   {
 	struct sched_attr attr;
 	int x = 0;
 	int ret;
@@ -851,10 +868,10 @@ Appendix B. Minimal main()
 
 	printf("deadline thread dies [%ld]\n", gettid());
 	return NULL;
- }
+   }
 
- int main (int argc, char **argv)
- {
+   int main (int argc, char **argv)
+   {
 	pthread_t thread;
 
 	printf("main thread [%ld]\n", gettid());
@@ -868,4 +885,4 @@ Appendix B. Minimal main()
 
 	printf("main dies [%ld]\n", gettid());
 	return 0;
- }
+   }
diff --git a/Documentation/scheduler/sched-design-CFS.txt b/Documentation/scheduler/sched-design-CFS.rst
similarity index 97%
rename from Documentation/scheduler/sched-design-CFS.txt
rename to Documentation/scheduler/sched-design-CFS.rst
index d1328890ef28..53b30d1967cf 100644
--- a/Documentation/scheduler/sched-design-CFS.txt
+++ b/Documentation/scheduler/sched-design-CFS.rst
@@ -1,9 +1,10 @@
-                      =============
-                      CFS Scheduler
-                      =============
+=============
+CFS Scheduler
+=============
 
 
 1.  OVERVIEW
+============
 
 CFS stands for "Completely Fair Scheduler," and is the new "desktop" process
 scheduler implemented by Ingo Molnar and merged in Linux 2.6.23.  It is the
@@ -27,6 +28,7 @@ is its actual runtime normalized to the total number of running tasks.
 
 
 2.  FEW IMPLEMENTATION DETAILS
+==============================
 
 In CFS the virtual runtime is expressed and tracked via the per-task
 p->se.vruntime (nanosec-unit) value.  This way, it's possible to accurately
@@ -49,6 +51,7 @@ algorithm variants to recognize sleepers.
 
 
 3.  THE RBTREE
+==============
 
 CFS's design is quite radical: it does not use the old data structures for the
 runqueues, but it uses a time-ordered rbtree to build a "timeline" of future
@@ -84,6 +87,7 @@ picked and the current task is preempted.
 
 
 4.  SOME FEATURES OF CFS
+========================
 
 CFS uses nanosecond granularity accounting and does not rely on any jiffies or
 other HZ detail.  Thus the CFS scheduler has no notion of "timeslices" in the
@@ -113,6 +117,7 @@ result.
 
 
 5. Scheduling policies
+======================
 
 CFS implements three scheduling policies:
 
@@ -137,6 +142,7 @@ SCHED_IDLE.
 
 
 6.  SCHEDULING CLASSES
+======================
 
 The new CFS scheduler has been designed in such a way to introduce "Scheduling
 Classes," an extensible hierarchy of scheduler modules.  These modules
@@ -197,6 +203,7 @@ This is the (partial) list of the hooks:
 
 
 7.  GROUP SCHEDULER EXTENSIONS TO CFS
+=====================================
 
 Normally, the scheduler operates on individual tasks and strives to provide
 fair CPU time to each task.  Sometimes, it may be desirable to group tasks and
@@ -219,7 +226,7 @@ SCHED_BATCH) tasks.
 
 When CONFIG_FAIR_GROUP_SCHED is defined, a "cpu.shares" file is created for each
 group created using the pseudo filesystem.  See example steps below to create
-task groups and modify their CPU share using the "cgroups" pseudo filesystem.
+task groups and modify their CPU share using the "cgroups" pseudo filesystem::
 
 	# mount -t tmpfs cgroup_root /sys/fs/cgroup
 	# mkdir /sys/fs/cgroup/cpu
diff --git a/Documentation/scheduler/sched-domains.txt b/Documentation/scheduler/sched-domains.rst
similarity index 97%
rename from Documentation/scheduler/sched-domains.txt
rename to Documentation/scheduler/sched-domains.rst
index 4af80b1c05aa..f7504226f445 100644
--- a/Documentation/scheduler/sched-domains.txt
+++ b/Documentation/scheduler/sched-domains.rst
@@ -1,3 +1,7 @@
+=================
+Scheduler Domains
+=================
+
 Each CPU has a "base" scheduling domain (struct sched_domain). The domain
 hierarchy is built from these base domains via the ->parent pointer. ->parent
 MUST be NULL terminated, and domain structures should be per-CPU as they are
@@ -46,7 +50,9 @@ CPU's runqueue and the newly found busiest one and starts moving tasks from it
 to our runqueue. The exact number of tasks amounts to an imbalance previously
 computed while iterating over this sched domain's groups.
 
-*** Implementing sched domains ***
+Implementing sched domains
+==========================
+
 The "base" domain will "span" the first level of the hierarchy. In the case
 of SMT, you'll span all siblings of the physical CPU, with each group being
 a single virtual CPU.
diff --git a/Documentation/scheduler/sched-energy.txt b/Documentation/scheduler/sched-energy.rst
similarity index 96%
rename from Documentation/scheduler/sched-energy.txt
rename to Documentation/scheduler/sched-energy.rst
index d97207b9accb..9580c57a52bc 100644
--- a/Documentation/scheduler/sched-energy.txt
+++ b/Documentation/scheduler/sched-energy.rst
@@ -1,6 +1,6 @@
-			   =======================
-			   Energy Aware Scheduling
-			   =======================
+=======================
+Energy Aware Scheduling
+=======================
 
 1. Introduction
 ---------------
@@ -12,7 +12,7 @@ with a minimal impact on throughput. This document aims at providing an
 introduction on how EAS works, what are the main design decisions behind it, and
 details what is needed to get it to run.
 
-Before going any further, please note that at the time of writing:
+Before going any further, please note that at the time of writing::
 
    /!\ EAS does not support platforms with symmetric CPU topologies /!\
 
@@ -33,13 +33,13 @@ To make it clear from the start:
  - power = energy/time = [joule/second] = [watt]
 
 The goal of EAS is to minimize energy, while still getting the job done. That
-is, we want to maximize:
+is, we want to maximize::
 
 	performance [inst/s]
 	--------------------
 	    power [W]
 
-which is equivalent to minimizing:
+which is equivalent to minimizing::
 
 	energy [J]
 	-----------
@@ -97,7 +97,7 @@ domains can contain duplicate elements.
 
 Example 1.
     Let us consider a platform with 12 CPUs, split in 3 performance domains
-    (pd0, pd4 and pd8), organized as follows:
+    (pd0, pd4 and pd8), organized as follows::
 
 	          CPUs:   0 1 2 3 4 5 6 7 8 9 10 11
 	          PDs:   |--pd0--|--pd4--|---pd8---|
@@ -108,6 +108,7 @@ Example 1.
     containing 6 CPUs. The two root domains are denoted rd1 and rd2 in the
     above figure. Since pd4 intersects with both rd1 and rd2, it will be
     present in the linked list '->pd' attached to each of them:
+
        * rd1->pd: pd0 -> pd4
        * rd2->pd: pd4 -> pd8
 
@@ -159,9 +160,9 @@ Example 2.
     Each performance domain has three Operating Performance Points (OPPs).
     The CPU capacity and power cost associated with each OPP is listed in
     the Energy Model table. The util_avg of P is shown on the figures
-    below as 'PP'.
+    below as 'PP'::
 
-    CPU util.
+     CPU util.
       1024                 - - - - - - -              Energy Model
                                                +-----------+-------------+
                                                |  Little   |     Big     |
@@ -188,8 +189,7 @@ Example 2.
     (which is coherent with the behaviour of the schedutil CPUFreq
     governor, see Section 6. for more details on this topic).
 
-    Case 1. P is migrated to CPU1
-    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+    **Case 1. P is migrated to CPU1**::
 
       1024                 - - - - - - -
 
@@ -207,8 +207,7 @@ Example 2.
             CPU0   CPU1     CPU2   CPU3
 
 
-    Case 2. P is migrated to CPU3
-    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+    **Case 2. P is migrated to CPU3**::
 
       1024                 - - - - - - -
 
@@ -226,8 +225,7 @@ Example 2.
             CPU0   CPU1     CPU2   CPU3
 
 
-    Case 3. P stays on prev_cpu / CPU 0
-    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+    **Case 3. P stays on prev_cpu / CPU 0**::
 
       1024                 - - - - - - -
 
@@ -324,7 +322,9 @@ hardware properties and on other features of the kernel being enabled. This
 section lists these dependencies and provides hints as to how they can be met.
 
 
-  6.1 - Asymmetric CPU topology
+6.1 - Asymmetric CPU topology
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
 
 As mentioned in the introduction, EAS is only supported on platforms with
 asymmetric CPU topologies for now. This requirement is checked at run-time by
@@ -347,7 +347,8 @@ significant savings on SMP platforms have been observed yet. This restriction
 could be amended in the future if proven otherwise.
 
 
-  6.2 - Energy Model presence
+6.2 - Energy Model presence
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 EAS uses the EM of a platform to estimate the impact of scheduling decisions on
 energy. So, your platform must provide power cost tables to the EM framework in
@@ -358,7 +359,8 @@ Please also note that the scheduling domains need to be re-built after the
 EM has been registered in order to start EAS.
 
 
-  6.3 - Energy Model complexity
+6.3 - Energy Model complexity
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 The task wake-up path is very latency-sensitive. When the EM of a platform is
 too complex (too many CPUs, too many performance domains, too many performance
@@ -388,7 +390,8 @@ two possible options:
        hence enabling it to cope with larger EMs in reasonable time.
 
 
-  6.4 - Schedutil governor
+6.4 - Schedutil governor
+^^^^^^^^^^^^^^^^^^^^^^^^
 
 EAS tries to predict at which OPP will the CPUs be running in the close future
 in order to estimate their energy consumption. To do so, it is assumed that OPPs
@@ -405,7 +408,8 @@ frequency requests and energy predictions.
 Using EAS with any other governor than schedutil is not supported.
 
 
-  6.5 Scale-invariant utilization signals
+6.5 Scale-invariant utilization signals
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 In order to make accurate prediction across CPUs and for all performance
 states, EAS needs frequency-invariant and CPU-invariant PELT signals. These can
@@ -416,7 +420,8 @@ Using EAS on a platform that doesn't implement these two callbacks is not
 supported.
 
 
-  6.6 Multithreading (SMT)
+6.6 Multithreading (SMT)
+^^^^^^^^^^^^^^^^^^^^^^^^
 
 EAS in its current form is SMT unaware and is not able to leverage
 multithreaded hardware to save energy. EAS considers threads as independent
diff --git a/Documentation/scheduler/sched-nice-design.txt b/Documentation/scheduler/sched-nice-design.rst
similarity index 98%
rename from Documentation/scheduler/sched-nice-design.txt
rename to Documentation/scheduler/sched-nice-design.rst
index 3ac1e46d5365..0571f1b47e64 100644
--- a/Documentation/scheduler/sched-nice-design.txt
+++ b/Documentation/scheduler/sched-nice-design.rst
@@ -1,3 +1,7 @@
+=====================
+Scheduler Nice Design
+=====================
+
 This document explains the thinking about the revamped and streamlined
 nice-levels implementation in the new Linux scheduler.
 
@@ -14,7 +18,7 @@ much stronger than they were before in 2.4 (and people were happy about
 that change), and we also intentionally calibrated the linear timeslice
 rule so that nice +19 level would be _exactly_ 1 jiffy. To better
 understand it, the timeslice graph went like this (cheesy ASCII art
-alert!):
+alert!)::
 
 
                    A
diff --git a/Documentation/scheduler/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.rst
similarity index 95%
rename from Documentation/scheduler/sched-rt-group.txt
rename to Documentation/scheduler/sched-rt-group.rst
index c09f7a3fee66..d27d3f3712fd 100644
--- a/Documentation/scheduler/sched-rt-group.txt
+++ b/Documentation/scheduler/sched-rt-group.rst
@@ -1,18 +1,18 @@
-				Real-Time group scheduling
-				--------------------------
+==========================
+Real-Time group scheduling
+==========================
 
-CONTENTS
-========
+.. CONTENTS
 
-0. WARNING
-1. Overview
-  1.1 The problem
-  1.2 The solution
-2. The interface
-  2.1 System-wide settings
-  2.2 Default behaviour
-  2.3 Basis for grouping tasks
-3. Future plans
+   0. WARNING
+   1. Overview
+     1.1 The problem
+     1.2 The solution
+   2. The interface
+     2.1 System-wide settings
+     2.2 Default behaviour
+     2.3 Basis for grouping tasks
+   3. Future plans
 
 
 0. WARNING
@@ -159,9 +159,11 @@ Consider two sibling groups A and B; both have 50% bandwidth, but A's
 period is twice the length of B's.
 
 * group A: period=100000us, runtime=50000us
+
 	- this runs for 0.05s once every 0.1s
 
 * group B: period= 50000us, runtime=25000us
+
 	- this runs for 0.025s twice every 0.1s (or once every 0.05 sec).
 
 This means that currently a while (1) loop in A will run for the full period of
diff --git a/Documentation/scheduler/sched-stats.txt b/Documentation/scheduler/sched-stats.rst
similarity index 91%
rename from Documentation/scheduler/sched-stats.txt
rename to Documentation/scheduler/sched-stats.rst
index 8259b34a66ae..0cb0aa714545 100644
--- a/Documentation/scheduler/sched-stats.txt
+++ b/Documentation/scheduler/sched-stats.rst
@@ -1,3 +1,7 @@
+====================
+Scheduler Statistics
+====================
+
 Version 15 of schedstats dropped counters for some sched_yield:
 yld_exp_empty, yld_act_empty and yld_both_empty. Otherwise, it is
 identical to version 14.
@@ -35,19 +39,23 @@ CPU statistics
 cpu<N> 1 2 3 4 5 6 7 8 9
 
 First field is a sched_yield() statistic:
+
      1) # of times sched_yield() was called
 
 Next three are schedule() statistics:
+
      2) This field is a legacy array expiration count field used in the O(1)
 	scheduler. We kept it for ABI compatibility, but it is always set to zero.
      3) # of times schedule() was called
      4) # of times schedule() left the processor idle
 
 Next two are try_to_wake_up() statistics:
+
      5) # of times try_to_wake_up() was called
      6) # of times try_to_wake_up() was called to wake up the local cpu
 
 Next three are statistics describing scheduling latency:
+
      7) sum of all time spent running by tasks on this processor (in jiffies)
      8) sum of all time spent waiting to run by tasks on this processor (in
         jiffies)
@@ -67,24 +75,23 @@ The first field is a bit mask indicating what cpus this domain operates over.
 The next 24 are a variety of load_balance() statistics in grouped into types
 of idleness (idle, busy, and newly idle):
 
-     1) # of times in this domain load_balance() was called when the
+    1)  # of times in this domain load_balance() was called when the
         cpu was idle
-     2) # of times in this domain load_balance() checked but found
+    2)  # of times in this domain load_balance() checked but found
         the load did not require balancing when the cpu was idle
-     3) # of times in this domain load_balance() tried to move one or
+    3)  # of times in this domain load_balance() tried to move one or
         more tasks and failed, when the cpu was idle
-     4) sum of imbalances discovered (if any) with each call to
+    4)  sum of imbalances discovered (if any) with each call to
         load_balance() in this domain when the cpu was idle
-     5) # of times in this domain pull_task() was called when the cpu
+    5)  # of times in this domain pull_task() was called when the cpu
         was idle
-     6) # of times in this domain pull_task() was called even though
+    6)  # of times in this domain pull_task() was called even though
         the target task was cache-hot when idle
-     7) # of times in this domain load_balance() was called but did
+    7)  # of times in this domain load_balance() was called but did
         not find a busier queue while the cpu was idle
-     8) # of times in this domain a busier queue was found while the
+    8)  # of times in this domain a busier queue was found while the
         cpu was idle but no busier group was found
-
-     9) # of times in this domain load_balance() was called when the
+    9)  # of times in this domain load_balance() was called when the
         cpu was busy
     10) # of times in this domain load_balance() checked but found the
         load did not require balancing when busy
@@ -117,21 +124,25 @@ of idleness (idle, busy, and newly idle):
         was just becoming idle but no busier group was found
 
    Next three are active_load_balance() statistics:
+
     25) # of times active_load_balance() was called
     26) # of times active_load_balance() tried to move a task and failed
     27) # of times active_load_balance() successfully moved a task
 
    Next three are sched_balance_exec() statistics:
+
     28) sbe_cnt is not used
     29) sbe_balanced is not used
     30) sbe_pushed is not used
 
    Next three are sched_balance_fork() statistics:
+
     31) sbf_cnt is not used
     32) sbf_balanced is not used
     33) sbf_pushed is not used
 
    Next three are try_to_wake_up() statistics:
+
     34) # of times in this domain try_to_wake_up() awoke a task that
         last ran on a different cpu in this domain
     35) # of times in this domain try_to_wake_up() moved a task to the
@@ -139,10 +150,11 @@ of idleness (idle, busy, and newly idle):
     36) # of times in this domain try_to_wake_up() started passive balancing
 
 /proc/<pid>/schedstat
-----------------
+---------------------
 schedstats also adds a new /proc/<pid>/schedstat file to include some of
 the same information on a per-process level.  There are three fields in
 this file correlating for that process to:
+
      1) time spent on the cpu
      2) time spent waiting on a runqueue
      3) # of timeslices run on this cpu
@@ -151,4 +163,5 @@ A program could be easily written to make use of these extra fields to
 report on how well a particular process or set of processes is faring
 under the scheduler's policies.  A simple version of such a program is
 available at
+
     http://eaglet.rain.com/rick/linux/schedstat/v12/latency.c
diff --git a/Documentation/scheduler/text_files.rst b/Documentation/scheduler/text_files.rst
new file mode 100644
index 000000000000..0bc50307b241
--- /dev/null
+++ b/Documentation/scheduler/text_files.rst
@@ -0,0 +1,5 @@
+Scheduler pelt c program
+------------------------
+
+.. literalinclude:: sched-pelt.c
+    :language: c
diff --git a/Documentation/vm/numa.rst b/Documentation/vm/numa.rst
index 0d830edae8fe..130f3cfa1c19 100644
--- a/Documentation/vm/numa.rst
+++ b/Documentation/vm/numa.rst
@@ -99,7 +99,7 @@ Local allocation will tend to keep subsequent access to the allocated memory
 as long as the task on whose behalf the kernel allocated some memory does not
 later migrate away from that memory.  The Linux scheduler is aware of the
 NUMA topology of the platform--embodied in the "scheduling domains" data
-structures [see Documentation/scheduler/sched-domains.txt]--and the scheduler
+structures [see Documentation/scheduler/sched-domains.rst]--and the scheduler
 attempts to minimize task migration to distant scheduling domains.  However,
 the scheduler does not take a task's NUMA footprint into account directly.
 Thus, under sufficient imbalance, tasks can migrate between nodes, remote
diff --git a/init/Kconfig b/init/Kconfig
index 9b52c958fd92..70fa2d57ef49 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -725,7 +725,7 @@ menuconfig CGROUPS
 	  use with process control subsystems such as Cpusets, CFS, memory
 	  controls or device isolation.
 	  See
-		- Documentation/scheduler/sched-design-CFS.txt	(CFS)
+		- Documentation/scheduler/sched-design-CFS.rst	(CFS)
 		- Documentation/cgroup-v1/ (features for grouping, isolation
 					  and resource control)
 
@@ -826,7 +826,7 @@ config CFS_BANDWIDTH
 	  tasks running within the fair group scheduler.  Groups with no limit
 	  set are considered to be unconstrained and will run with no
 	  restriction.
-	  See Documentation/scheduler/sched-bwc.txt for more information.
+	  See Documentation/scheduler/sched-bwc.rst for more information.
 
 config RT_GROUP_SCHED
 	bool "Group scheduling for SCHED_RR/FIFO"
@@ -837,7 +837,7 @@ config RT_GROUP_SCHED
 	  to task groups. If enabled, it will also make it impossible to
 	  schedule realtime tasks for non-root users until you allocate
 	  realtime bandwidth for them.
-	  See Documentation/scheduler/sched-rt-group.txt for more information.
+	  See Documentation/scheduler/sched-rt-group.rst for more information.
 
 endif #CGROUP_SCHED
 
diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c
index 43901fa3f269..049d795ee9d3 100644
--- a/kernel/sched/deadline.c
+++ b/kernel/sched/deadline.c
@@ -726,7 +726,7 @@ static void replenish_dl_entity(struct sched_dl_entity *dl_se,
  * refill the runtime and set the deadline a period in the future,
  * because keeping the current (absolute) deadline of the task would
  * result in breaking guarantees promised to other tasks (refer to
- * Documentation/scheduler/sched-deadline.txt for more information).
+ * Documentation/scheduler/sched-deadline.rst for more information).
  *
  * This function returns true if:
  *
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 39/79] docs: EDID/HOWTO.txt: convert it and rename to howto.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (36 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 38/79] docs: scheduler: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 40/79] convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
                     ` (39 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Maarten Lankhorst, Maxime Ripard, Sean Paul,
	David Airlie, Daniel Vetter, dri-devel

Sphinx need to know when a paragraph ends. So, do some adjustments
at the file for it to be properly parsed.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

that's said, I believe that this file should be moved to the
GPU/DRM documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/EDID/{HOWTO.txt => howto.rst}   | 31 ++++++++++++-------
 .../admin-guide/kernel-parameters.txt         |  2 +-
 drivers/gpu/drm/Kconfig                       |  2 +-
 3 files changed, 22 insertions(+), 13 deletions(-)
 rename Documentation/EDID/{HOWTO.txt => howto.rst} (83%)

diff --git a/Documentation/EDID/HOWTO.txt b/Documentation/EDID/howto.rst
similarity index 83%
rename from Documentation/EDID/HOWTO.txt
rename to Documentation/EDID/howto.rst
index 539871c3b785..725fd49a88ca 100644
--- a/Documentation/EDID/HOWTO.txt
+++ b/Documentation/EDID/howto.rst
@@ -1,3 +1,9 @@
+:orphan:
+
+====
+EDID
+====
+
 In the good old days when graphics parameters were configured explicitly
 in a file called xorg.conf, even broken hardware could be managed.
 
@@ -34,16 +40,19 @@ Makefile. Please note that the EDID data structure expects the timing
 values in a different way as compared to the standard X11 format.
 
 X11:
-HTimings:  hdisp hsyncstart hsyncend htotal
-VTimings:  vdisp vsyncstart vsyncend vtotal
+  HTimings:
+    hdisp hsyncstart hsyncend htotal
+  VTimings:
+    vdisp vsyncstart vsyncend vtotal
 
-EDID:
-#define XPIX hdisp
-#define XBLANK htotal-hdisp
-#define XOFFSET hsyncstart-hdisp
-#define XPULSE hsyncend-hsyncstart
+EDID::
 
-#define YPIX vdisp
-#define YBLANK vtotal-vdisp
-#define YOFFSET vsyncstart-vdisp
-#define YPULSE vsyncend-vsyncstart
+  #define XPIX hdisp
+  #define XBLANK htotal-hdisp
+  #define XOFFSET hsyncstart-hdisp
+  #define XPULSE hsyncend-hsyncstart
+
+  #define YPIX vdisp
+  #define YBLANK vtotal-vdisp
+  #define YOFFSET vsyncstart-vdisp
+  #define YPULSE vsyncend-vsyncstart
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 5006f876cf0e..4a2260eac131 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -929,7 +929,7 @@
 			edid/1680x1050.bin, or edid/1920x1080.bin is given
 			and no file with the same name exists. Details and
 			instructions how to build your own EDID data are
-			available in Documentation/EDID/HOWTO.txt. An EDID
+			available in Documentation/EDID/howto.rst. An EDID
 			data set will only be used for a particular connector,
 			if its name and a colon are prepended to the EDID
 			name. Each connector may use a unique EDID data
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 39d5f7562f1c..bc5658d7a84b 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -140,7 +140,7 @@ config DRM_LOAD_EDID_FIRMWARE
 	  monitor are unable to provide appropriate EDID data. Since this
 	  feature is provided as a workaround for broken hardware, the
 	  default case is N. Details and instructions how to build your own
-	  EDID data are given in Documentation/EDID/HOWTO.txt.
+	  EDID data are given in Documentation/EDID/howto.rst.
 
 config DRM_DP_CEC
 	bool "Enable DisplayPort CEC-Tunneling-over-AUX HDMI support"
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 40/79] convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (37 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 39/79] docs: EDID/HOWTO.txt: convert it and rename to howto.rst Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 41/79] docs: lcd-panel-cgram.txt: " Mauro Carvalho Chehab
                     ` (38 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Evgeniy Polyakov

As it has some function definitions, move them to connector.h.

The remaining conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../{connector.txt => connector.rst}          | 130 ++++++------------
 drivers/w1/Kconfig                            |   2 +-
 include/linux/connector.h                     |  63 ++++++++-
 samples/Kconfig                               |   2 +-
 4 files changed, 109 insertions(+), 88 deletions(-)
 rename Documentation/connector/{connector.txt => connector.rst} (57%)

diff --git a/Documentation/connector/connector.txt b/Documentation/connector/connector.rst
similarity index 57%
rename from Documentation/connector/connector.txt
rename to Documentation/connector/connector.rst
index ab7ca897fab7..24e26dc22dbf 100644
--- a/Documentation/connector/connector.txt
+++ b/Documentation/connector/connector.rst
@@ -1,6 +1,8 @@
-/*****************************************/
-Kernel Connector.
-/*****************************************/
+:orphan:
+
+================
+Kernel Connector
+================
 
 Kernel connector - new netlink based userspace <-> kernel space easy
 to use communication module.
@@ -12,94 +14,55 @@ identifier, the appropriate callback will be called.
 
 From the userspace point of view it's quite straightforward:
 
-	socket();
-	bind();
-	send();
-	recv();
+	- socket();
+	- bind();
+	- send();
+	- recv();
 
 But if kernelspace wants to use the full power of such connections, the
 driver writer must create special sockets, must know about struct sk_buff
 handling, etc...  The Connector driver allows any kernelspace agents to use
 netlink based networking for inter-process communication in a significantly
-easier way:
+easier way::
 
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
-void cn_netlink_send_multi(struct cn_msg *msg, u16 len, u32 portid, u32 __group, int gfp_mask);
-void cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __group, int gfp_mask);
+  int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
+  void cn_netlink_send_multi(struct cn_msg *msg, u16 len, u32 portid, u32 __group, int gfp_mask);
+  void cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __group, int gfp_mask);
 
-struct cb_id
-{
+  struct cb_id
+  {
 	__u32			idx;
 	__u32			val;
-};
+  };
 
 idx and val are unique identifiers which must be registered in the
-connector.h header for in-kernel usage.  void (*callback) (void *) is a
+connector.h header for in-kernel usage.  `void (*callback) (void *)` is a
 callback function which will be called when a message with above idx.val
 is received by the connector core.  The argument for that function must
-be dereferenced to struct cn_msg *.
+be dereferenced to `struct cn_msg *`::
 
-struct cn_msg
-{
+  struct cn_msg
+  {
 	struct cb_id		id;
 
 	__u32			seq;
 	__u32			ack;
 
-	__u32			len;		/* Length of the following data */
+	__u32			len;	/* Length of the following data */
 	__u8			data[0];
-};
+  };
 
-/*****************************************/
-Connector interfaces.
-/*****************************************/
+Connector interfaces
+====================
 
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
+ .. kernel-doc:: include/linux/connector.h
 
- Registers new callback with connector core.
+ Note:
+   When registering new callback user, connector core assigns
+   netlink group to the user which is equal to its id.idx.
 
- struct cb_id *id		- unique connector's user identifier.
-				  It must be registered in connector.h for legal in-kernel users.
- char *name			- connector's callback symbolic name.
- void (*callback) (struct cn..)	- connector's callback.
-				  cn_msg and the sender's credentials
-
-
-void cn_del_callback(struct cb_id *id);
-
- Unregisters new callback with connector core.
-
- struct cb_id *id		- unique connector's user identifier.
-
-
-int cn_netlink_send_multi(struct cn_msg *msg, u16 len, u32 portid, u32 __groups, int gfp_mask);
-int cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __groups, int gfp_mask);
-
- Sends message to the specified groups.  It can be safely called from
- softirq context, but may silently fail under strong memory pressure.
- If there are no listeners for given group -ESRCH can be returned.
-
- struct cn_msg *		- message header(with attached data).
- u16 len			- for *_multi multiple cn_msg messages can be sent
- u32 port			- destination port.
- 				  If non-zero the message will be sent to the
-				  given port, which should be set to the
-				  original sender.
- u32 __group			- destination group.
-				  If port and __group is zero, then appropriate group will
-				  be searched through all registered connector users,
-				  and message will be delivered to the group which was
-				  created for user with the same ID as in msg.
-				  If __group is not zero, then message will be delivered
-				  to the specified group.
- int gfp_mask			- GFP mask.
-
- Note: When registering new callback user, connector core assigns
- netlink group to the user which is equal to its id.idx.
-
-/*****************************************/
-Protocol description.
-/*****************************************/
+Protocol description
+====================
 
 The current framework offers a transport layer with fixed headers.  The
 recommended protocol which uses such a header is as following:
@@ -132,9 +95,8 @@ driver (it also registers itself with id={-1, -1}).
 As example of this usage can be found in the cn_test.c module which
 uses the connector to request notification and to send messages.
 
-/*****************************************/
-Reliability.
-/*****************************************/
+Reliability
+===========
 
 Netlink itself is not a reliable protocol.  That means that messages can
 be lost due to memory pressure or process' receiving queue overflowed,
@@ -142,32 +104,31 @@ so caller is warned that it must be prepared.  That is why the struct
 cn_msg [main connector's message header] contains u32 seq and u32 ack
 fields.
 
-/*****************************************/
-Userspace usage.
-/*****************************************/
+Userspace usage
+===============
 
 2.6.14 has a new netlink socket implementation, which by default does not
 allow people to send data to netlink groups other than 1.
 So, if you wish to use a netlink socket (for example using connector)
 with a different group number, the userspace application must subscribe to
-that group first.  It can be achieved by the following pseudocode:
+that group first.  It can be achieved by the following pseudocode::
 
-s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
+  s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
 
-l_local.nl_family = AF_NETLINK;
-l_local.nl_groups = 12345;
-l_local.nl_pid = 0;
+  l_local.nl_family = AF_NETLINK;
+  l_local.nl_groups = 12345;
+  l_local.nl_pid = 0;
 
-if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
+  if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
 	perror("bind");
 	close(s);
 	return -1;
-}
+  }
 
-{
+  {
 	int on = l_local.nl_groups;
 	setsockopt(s, 270, 1, &on, sizeof(on));
-}
+  }
 
 Where 270 above is SOL_NETLINK, and 1 is a NETLINK_ADD_MEMBERSHIP socket
 option.  To drop a multicast subscription, one should call the above socket
@@ -180,16 +141,15 @@ group number 12345, you must increment CN_NETLINK_USERS to that number.
 Additional 0xf numbers are allocated to be used by non-in-kernel users.
 
 Due to this limitation, group 0xffffffff does not work now, so one can
-not use add/remove connector's group notifications, but as far as I know, 
+not use add/remove connector's group notifications, but as far as I know,
 only cn_test.c test module used it.
 
 Some work in netlink area is still being done, so things can be changed in
 2.6.15 timeframe, if it will happen, documentation will be updated for that
 kernel.
 
-/*****************************************/
 Code samples
-/*****************************************/
+============
 
 Sample code for a connector test module and user space can be found
 in samples/connector/. To build this code, enable CONFIG_CONNECTOR
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index dbb41f45af8a..c670bb247f21 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -18,7 +18,7 @@ config W1_CON
 	default y
 	---help---
 	  This allows to communicate with userspace using connector. For more
-	  information see <file:Documentation/connector/connector.txt>.
+	  information see <file:Documentation/connector/connector.rst>.
 	  There are three types of messages between w1 core and userspace:
 	  1. Events. They are generated each time new master or slave device found
 		either due to automatic or requested search.
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 032102b19645..5aeb15f71b3a 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -68,10 +68,71 @@ struct cn_dev {
 	struct cn_queue_dev *cbdev;
 };
 
+/**
+ * cn_add_callback() - Registers new callback with connector core.
+ *
+ * @id:		unique connector's user identifier.
+ *		It must be registered in connector.h for legal
+ *		in-kernel users.
+ * @name:	connector's callback symbolic name.
+ * @callback:	connector's callback.
+ * 		parameters are %cn_msg and the sender's credentials
+ */
 int cn_add_callback(struct cb_id *id, const char *name,
 		    void (*callback)(struct cn_msg *, struct netlink_skb_parms *));
-void cn_del_callback(struct cb_id *);
+/**
+ * cn_del_callback() - Unregisters new callback with connector core.
+ *
+ * @id:		unique connector's user identifier.
+ */
+void cn_del_callback(struct cb_id *id);
+
+
+/**
+ * cn_netlink_send_mult - Sends message to the specified groups.
+ *
+ * @msg: 	message header(with attached data).
+ * @len:	Number of @msg to be sent.
+ * @portid:	destination port.
+ *		If non-zero the message will be sent to the given port,
+ *		which should be set to the original sender.
+ * @group:	destination group.
+ * 		If @portid and @group is zero, then appropriate group will
+ *		be searched through all registered connector users, and
+ *		message will be delivered to the group which was created
+ *		for user with the same ID as in @msg.
+ *		If @group is not zero, then message will be delivered
+ *		to the specified group.
+ * @gfp_mask:	GFP mask.
+ *
+ * It can be safely called from softirq context, but may silently
+ * fail under strong memory pressure.
+ *
+ * If there are no listeners for given group %-ESRCH can be returned.
+ */
 int cn_netlink_send_mult(struct cn_msg *msg, u16 len, u32 portid, u32 group, gfp_t gfp_mask);
+
+/**
+ * cn_netlink_send_mult - Sends message to the specified groups.
+ *
+ * @msg:	message header(with attached data).
+ * @portid:	destination port.
+ *		If non-zero the message will be sent to the given port,
+ *		which should be set to the original sender.
+ * @group:	destination group.
+ * 		If @portid and @group is zero, then appropriate group will
+ *		be searched through all registered connector users, and
+ *		message will be delivered to the group which was created
+ *		for user with the same ID as in @msg.
+ *		If @group is not zero, then message will be delivered
+ *		to the specified group.
+ * @gfp_mask:	GFP mask.
+ *
+ * It can be safely called from softirq context, but may silently
+ * fail under strong memory pressure.
+ *
+ * If there are no listeners for given group %-ESRCH can be returned.
+ */
 int cn_netlink_send(struct cn_msg *msg, u32 portid, u32 group, gfp_t gfp_mask);
 
 int cn_queue_add_callback(struct cn_queue_dev *dev, const char *name,
diff --git a/samples/Kconfig b/samples/Kconfig
index d19754ccad08..12009247f482 100644
--- a/samples/Kconfig
+++ b/samples/Kconfig
@@ -100,7 +100,7 @@ config SAMPLE_CONNECTOR
 	  When enabled, this builds both a sample kernel module for
 	  the connector interface and a user space tool to communicate
 	  with it.
-	  See also Documentation/connector/connector.txt
+	  See also Documentation/connector/connector.rst
 
 config SAMPLE_SECCOMP
 	tristate "Build seccomp sample code -- loadable modules only"
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 41/79] docs: lcd-panel-cgram.txt: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (38 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 40/79] convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 42/79] docs: lp855x-driver.txt: convert to ReST and move to kernel-api Mauro Carvalho Chehab
                     ` (37 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet

This small text file describes the usage of parallel port LCD
displays from userspace PoV. So, a good candidate for the
admin guide.

While this is not part of the admin-guide book, mark it as
:orphan:, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../{lcd-panel-cgram.txt => lcd-panel-cgram.rst}         | 9 +++++++--
 MAINTAINERS                                              | 2 +-
 2 files changed, 8 insertions(+), 3 deletions(-)
 rename Documentation/auxdisplay/{lcd-panel-cgram.txt => lcd-panel-cgram.rst} (88%)

diff --git a/Documentation/auxdisplay/lcd-panel-cgram.txt b/Documentation/auxdisplay/lcd-panel-cgram.rst
similarity index 88%
rename from Documentation/auxdisplay/lcd-panel-cgram.txt
rename to Documentation/auxdisplay/lcd-panel-cgram.rst
index 7f82c905763d..dfef50286018 100644
--- a/Documentation/auxdisplay/lcd-panel-cgram.txt
+++ b/Documentation/auxdisplay/lcd-panel-cgram.rst
@@ -1,3 +1,9 @@
+:orphan:
+
+======================================
+Parallel port LCD/Keypad Panel support
+======================================
+
 Some LCDs allow you to define up to 8 characters, mapped to ASCII
 characters 0 to 7. The escape code to define a new character is
 '\e[LG' followed by one digit from 0 to 7, representing the character
@@ -7,7 +13,7 @@ illuminated pixel with LSB on the right. Lines are numbered from the
 top of the character to the bottom. On a 5x7 matrix, only the 5 lower
 bits of the 7 first bytes are used for each character. If the string
 is incomplete, only complete lines will be redefined. Here are some
-examples :
+examples::
 
   printf "\e[LG0010101050D1F0C04;"  => 0 = [enter]
   printf "\e[LG1040E1F0000000000;"  => 1 = [up]
@@ -21,4 +27,3 @@ examples :
   printf "\e[LG00002061E1E060200;"  => small speaker
 
 Willy
-
diff --git a/MAINTAINERS b/MAINTAINERS
index 24c52307361f..c40b6a876f2d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11773,7 +11773,7 @@ PARALLEL LCD/KEYPAD PANEL DRIVER
 M:	Willy Tarreau <willy@haproxy.com>
 M:	Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
 S:	Odd Fixes
-F:	Documentation/auxdisplay/lcd-panel-cgram.txt
+F:	Documentation/auxdisplay/lcd-panel-cgram.rst
 F:	drivers/auxdisplay/panel.c
 
 PARALLEL PORT SUBSYSTEM
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 42/79] docs: lp855x-driver.txt: convert to ReST and move to kernel-api
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (39 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 41/79] docs: lcd-panel-cgram.txt: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 43/79] docs: m68k: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
                     ` (36 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Milo Kim

This small file seems to be an attempt to start documenting
backlight drivers.

It contains descriptions of the controls for the driver
with could sound as an somewhat user-faced description, but
it's main focus is to describe, instead, the data that should
be passed via platform data and some driver-specific stuff.

While this is not part of the driver-api book, mark it as
:orphan:, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/backlight/lp855x-driver.rst | 83 +++++++++++++++++++++++
 Documentation/backlight/lp855x-driver.txt | 66 ------------------
 MAINTAINERS                               |  2 +-
 3 files changed, 84 insertions(+), 67 deletions(-)
 create mode 100644 Documentation/backlight/lp855x-driver.rst
 delete mode 100644 Documentation/backlight/lp855x-driver.txt

diff --git a/Documentation/backlight/lp855x-driver.rst b/Documentation/backlight/lp855x-driver.rst
new file mode 100644
index 000000000000..62b7ed847a77
--- /dev/null
+++ b/Documentation/backlight/lp855x-driver.rst
@@ -0,0 +1,83 @@
+:orphan:
+
+====================
+Kernel driver lp855x
+====================
+
+Backlight driver for LP855x ICs
+
+Supported chips:
+
+	Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and
+	LP8557
+
+Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+
+Description
+-----------
+
+* Brightness control
+
+  Brightness can be controlled by the pwm input or the i2c command.
+  The lp855x driver supports both cases.
+
+* Device attributes
+
+  1) bl_ctl_mode
+
+  Backlight control mode.
+
+  Value: pwm based or register based
+
+  2) chip_id
+
+  The lp855x chip id.
+
+  Value: lp8550/lp8551/lp8552/lp8553/lp8555/lp8556/lp8557
+
+Platform data for lp855x
+------------------------
+
+For supporting platform specific data, the lp855x platform data can be used.
+
+* name:
+	Backlight driver name. If it is not defined, default name is set.
+* device_control:
+	Value of DEVICE CONTROL register.
+* initial_brightness:
+	Initial value of backlight brightness.
+* period_ns:
+	Platform specific PWM period value. unit is nano.
+	Only valid when brightness is pwm input mode.
+* size_program:
+	Total size of lp855x_rom_data.
+* rom_data:
+	List of new eeprom/eprom registers.
+
+Examples
+========
+
+1) lp8552 platform data: i2c register mode with new eeprom data::
+
+    #define EEPROM_A5_ADDR	0xA5
+    #define EEPROM_A5_VAL	0x4f	/* EN_VSYNC=0 */
+
+    static struct lp855x_rom_data lp8552_eeprom_arr[] = {
+	{EEPROM_A5_ADDR, EEPROM_A5_VAL},
+    };
+
+    static struct lp855x_platform_data lp8552_pdata = {
+	.name = "lcd-bl",
+	.device_control = I2C_CONFIG(LP8552),
+	.initial_brightness = INITIAL_BRT,
+	.size_program = ARRAY_SIZE(lp8552_eeprom_arr),
+	.rom_data = lp8552_eeprom_arr,
+    };
+
+2) lp8556 platform data: pwm input mode with default rom data::
+
+    static struct lp855x_platform_data lp8556_pdata = {
+	.device_control = PWM_CONFIG(LP8556),
+	.initial_brightness = INITIAL_BRT,
+	.period_ns = 1000000,
+    };
diff --git a/Documentation/backlight/lp855x-driver.txt b/Documentation/backlight/lp855x-driver.txt
deleted file mode 100644
index 01bce243d3d7..000000000000
--- a/Documentation/backlight/lp855x-driver.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Kernel driver lp855x
-====================
-
-Backlight driver for LP855x ICs
-
-Supported chips:
-	Texas Instruments LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and
-	LP8557
-
-Author: Milo(Woogyom) Kim <milo.kim@ti.com>
-
-Description
------------
-
-* Brightness control
-
-Brightness can be controlled by the pwm input or the i2c command.
-The lp855x driver supports both cases.
-
-* Device attributes
-
-1) bl_ctl_mode
-Backlight control mode.
-Value : pwm based or register based
-
-2) chip_id
-The lp855x chip id.
-Value : lp8550/lp8551/lp8552/lp8553/lp8555/lp8556/lp8557
-
-Platform data for lp855x
-------------------------
-
-For supporting platform specific data, the lp855x platform data can be used.
-
-* name : Backlight driver name. If it is not defined, default name is set.
-* device_control : Value of DEVICE CONTROL register.
-* initial_brightness : Initial value of backlight brightness.
-* period_ns : Platform specific PWM period value. unit is nano.
-	     Only valid when brightness is pwm input mode.
-* size_program : Total size of lp855x_rom_data.
-* rom_data : List of new eeprom/eprom registers.
-
-example 1) lp8552 platform data : i2c register mode with new eeprom data
-
-#define EEPROM_A5_ADDR	0xA5
-#define EEPROM_A5_VAL	0x4f	/* EN_VSYNC=0 */
-
-static struct lp855x_rom_data lp8552_eeprom_arr[] = {
-	{EEPROM_A5_ADDR, EEPROM_A5_VAL},
-};
-
-static struct lp855x_platform_data lp8552_pdata = {
-	.name = "lcd-bl",
-	.device_control = I2C_CONFIG(LP8552),
-	.initial_brightness = INITIAL_BRT,
-	.size_program = ARRAY_SIZE(lp8552_eeprom_arr),
-	.rom_data = lp8552_eeprom_arr,
-};
-
-example 2) lp8556 platform data : pwm input mode with default rom data
-
-static struct lp855x_platform_data lp8556_pdata = {
-	.device_control = PWM_CONFIG(LP8556),
-	.initial_brightness = INITIAL_BRT,
-	.period_ns = 1000000,
-};
diff --git a/MAINTAINERS b/MAINTAINERS
index c40b6a876f2d..f67d86aad5f0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15616,7 +15616,7 @@ F:	sound/soc/codecs/isabelle*
 TI LP855x BACKLIGHT DRIVER
 M:	Milo Kim <milo.kim@ti.com>
 S:	Maintained
-F:	Documentation/backlight/lp855x-driver.txt
+F:	Documentation/backlight/lp855x-driver.rst
 F:	drivers/video/backlight/lp855x_bl.c
 F:	include/linux/platform_data/lp855x.h
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 43/79] docs: m68k: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (40 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 42/79] docs: lp855x-driver.txt: convert to ReST and move to kernel-api Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-05-03 11:55     ` Geert Uytterhoeven
  2019-04-22 13:27   ` [PATCH v2 44/79] docs: cma/debugfs.txt: " Mauro Carvalho Chehab
                     ` (35 subsequent siblings)
  77 siblings, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet

Convert the m68k kernel-options.txt file to ReST.

The conversion is trivial, as the document is already on a format
close enough to ReST. Just some small adjustments were needed in
order to make it both good for being parsed while keeping it on
a good txt shape.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../admin-guide/kernel-parameters.rst         |   2 +-
 Documentation/m68k/index.rst                  |  17 +
 ...{kernel-options.txt => kernel-options.rst} | 319 ++++++++++--------
 3 files changed, 191 insertions(+), 147 deletions(-)
 create mode 100644 Documentation/m68k/index.rst
 rename Documentation/m68k/{kernel-options.txt => kernel-options.rst} (78%)

diff --git a/Documentation/admin-guide/kernel-parameters.rst b/Documentation/admin-guide/kernel-parameters.rst
index b8d0bc07ed0a..a4d76c6a13bd 100644
--- a/Documentation/admin-guide/kernel-parameters.rst
+++ b/Documentation/admin-guide/kernel-parameters.rst
@@ -117,7 +117,7 @@ parameter is applicable::
 	LOOP	Loopback device support is enabled.
 	M68k	M68k architecture is enabled.
 			These options have more detailed description inside of
-			Documentation/m68k/kernel-options.txt.
+			Documentation/m68k/kernel-options.rst.
 	MDA	MDA console support is enabled.
 	MIPS	MIPS architecture is enabled.
 	MOUSE	Appropriate mouse support is enabled.
diff --git a/Documentation/m68k/index.rst b/Documentation/m68k/index.rst
new file mode 100644
index 000000000000..f3273ec075c3
--- /dev/null
+++ b/Documentation/m68k/index.rst
@@ -0,0 +1,17 @@
+:orphan:
+
+=================
+m68k Architecture
+=================
+
+.. toctree::
+   :maxdepth: 2
+
+   kernel-options
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/m68k/kernel-options.txt b/Documentation/m68k/kernel-options.rst
similarity index 78%
rename from Documentation/m68k/kernel-options.txt
rename to Documentation/m68k/kernel-options.rst
index 79d21246c75a..cabd9419740d 100644
--- a/Documentation/m68k/kernel-options.txt
+++ b/Documentation/m68k/kernel-options.rst
@@ -1,22 +1,24 @@
-
-
-				  Command Line Options for Linux/m68k
-				  ===================================
+===================================
+Command Line Options for Linux/m68k
+===================================
 
 Last Update: 2 May 1999
+
 Linux/m68k version: 2.2.6
+
 Author: Roman.Hodek@informatik.uni-erlangen.de (Roman Hodek)
+
 Update: jds@kom.auc.dk (Jes Sorensen) and faq@linux-m68k.org (Chris Lawrence)
 
 0) Introduction
 ===============
 
-  Often I've been asked which command line options the Linux/m68k
+Often I've been asked which command line options the Linux/m68k
 kernel understands, or how the exact syntax for the ... option is, or
 ... about the option ... . I hope, this document supplies all the
 answers...
 
-  Note that some options might be outdated, their descriptions being
+Note that some options might be outdated, their descriptions being
 incomplete or missing. Please update the information and send in the
 patches.
 
@@ -38,11 +40,11 @@ argument contains an '=', it is of class 2, and the definition is put
 into init's environment. All other arguments are passed to init as
 command line options.
 
-  This document describes the valid kernel options for Linux/m68k in
+This document describes the valid kernel options for Linux/m68k in
 the version mentioned at the start of this file. Later revisions may
 add new such options, and some may be missing in older versions.
 
-  In general, the value (the part after the '=') of an option is a
+In general, the value (the part after the '=') of an option is a
 list of values separated by commas. The interpretation of these values
 is up to the driver that "owns" the option. This association of
 options with drivers is also the reason that some are further
@@ -55,21 +57,21 @@ subdivided.
 2.1) root=
 ----------
 
-Syntax: root=/dev/<device>
-    or: root=<hex_number>
+:Syntax: root=/dev/<device>
+:or:     root=<hex_number>
 
 This tells the kernel which device it should mount as the root
 filesystem. The device must be a block device with a valid filesystem
 on it.
 
-  The first syntax gives the device by name. These names are converted
+The first syntax gives the device by name. These names are converted
 into a major/minor number internally in the kernel in an unusual way.
 Normally, this "conversion" is done by the device files in /dev, but
 this isn't possible here, because the root filesystem (with /dev)
 isn't mounted yet... So the kernel parses the name itself, with some
 hardcoded name to number mappings. The name must always be a
 combination of two or three letters, followed by a decimal number.
-Valid names are:
+Valid names are::
 
   /dev/ram: -> 0x0100 (initial ramdisk)
   /dev/hda: -> 0x0300 (first IDE disk)
@@ -81,7 +83,7 @@ Valid names are:
   /dev/sde: -> 0x0840 (fifth SCSI disk)
   /dev/fd : -> 0x0200 (floppy disk)
 
-  The name must be followed by a decimal number, that stands for the
+The name must be followed by a decimal number, that stands for the
 partition number. Internally, the value of the number is just
 added to the device number mentioned in the table above. The
 exceptions are /dev/ram and /dev/fd, where /dev/ram refers to an
@@ -100,12 +102,12 @@ the kernel command line.
 
 [Strange and maybe uninteresting stuff ON]
 
-  This unusual translation of device names has some strange
+This unusual translation of device names has some strange
 consequences: If, for example, you have a symbolic link from /dev/fd
 to /dev/fd0D720 as an abbreviation for floppy driver #0 in DD format,
 you cannot use this name for specifying the root device, because the
 kernel cannot see this symlink before mounting the root FS and it
-isn't in the table above. If you use it, the root device will not be 
+isn't in the table above. If you use it, the root device will not be
 set at all, without an error message. Another example: You cannot use a
 partition on e.g. the sixth SCSI disk as the root filesystem, if you
 want to specify it by name. This is, because only the devices up to
@@ -118,7 +120,7 @@ knowledge that each disk uses 16 minors, and write "root=/dev/sde17"
 
 [Strange and maybe uninteresting stuff OFF]
 
-  If the device containing your root partition isn't in the table
+If the device containing your root partition isn't in the table
 above, you can also specify it by major and minor numbers. These are
 written in hex, with no prefix and no separator between. E.g., if you
 have a CD with contents appropriate as a root filesystem in the first
@@ -136,6 +138,7 @@ known partition UUID as the starting point.  For example,
 if partition 5 of the device has the UUID of
 00112233-4455-6677-8899-AABBCCDDEEFF then partition 3 may be found as
 follows:
+
   PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF/PARTNROFF=-2
 
 Authoritative information can be found in
@@ -145,8 +148,8 @@ Authoritative information can be found in
 2.2) ro, rw
 -----------
 
-Syntax: ro
-    or: rw
+:Syntax: ro
+:or:     rw
 
 These two options tell the kernel whether it should mount the root
 filesystem read-only or read-write. The default is read-only, except
@@ -156,7 +159,7 @@ for ramdisks, which default to read-write.
 2.3) debug
 ----------
 
-Syntax: debug
+:Syntax: debug
 
 This raises the kernel log level to 10 (the default is 7). This is the
 same level as set by the "dmesg" command, just that the maximum level
@@ -166,7 +169,7 @@ selectable by dmesg is 8.
 2.4) debug=
 -----------
 
-Syntax: debug=<device>
+:Syntax: debug=<device>
 
 This option causes certain kernel messages be printed to the selected
 debugging device. This can aid debugging the kernel, since the
@@ -175,7 +178,7 @@ devices are possible depends on the machine type. There are no checks
 for the validity of the device name. If the device isn't implemented,
 nothing happens.
 
-  Messages logged this way are in general stack dumps after kernel
+Messages logged this way are in general stack dumps after kernel
 memory faults or bad kernel traps, and kernel panics. To be exact: all
 messages of level 0 (panic messages) and all messages printed while
 the log level is 8 or more (their level doesn't matter). Before stack
@@ -185,19 +188,27 @@ at least 8 can also be set by the "debug" command line option (see
 
 Devices possible for Amiga:
 
- - "ser": built-in serial port; parameters: 9600bps, 8N1
- - "mem": Save the messages to a reserved area in chip mem. After
+ - "ser":
+	  built-in serial port; parameters: 9600bps, 8N1
+ - "mem":
+	  Save the messages to a reserved area in chip mem. After
           rebooting, they can be read under AmigaOS with the tool
           'dmesg'.
 
 Devices possible for Atari:
 
- - "ser1": ST-MFP serial port ("Modem1"); parameters: 9600bps, 8N1
- - "ser2": SCC channel B serial port ("Modem2"); parameters: 9600bps, 8N1
- - "ser" : default serial port
+ - "ser1":
+	   ST-MFP serial port ("Modem1"); parameters: 9600bps, 8N1
+ - "ser2":
+	   SCC channel B serial port ("Modem2"); parameters: 9600bps, 8N1
+ - "ser" :
+	   default serial port
            This is "ser2" for a Falcon, and "ser1" for any other machine
- - "midi": The MIDI port; parameters: 31250bps, 8N1
- - "par" : parallel port
+ - "midi":
+	   The MIDI port; parameters: 31250bps, 8N1
+ - "par" :
+	   parallel port
+
            The printing routine for this implements a timeout for the
            case there's no printer connected (else the kernel would
            lock up). The timeout is not exact, but usually a few
@@ -205,26 +216,29 @@ Devices possible for Atari:
 
 
 2.6) ramdisk_size=
--------------
+------------------
 
-Syntax: ramdisk_size=<size>
+:Syntax: ramdisk_size=<size>
 
-  This option instructs the kernel to set up a ramdisk of the given
+This option instructs the kernel to set up a ramdisk of the given
 size in KBytes. Do not use this option if the ramdisk contents are
 passed by bootstrap! In this case, the size is selected automatically
 and should not be overwritten.
 
-  The only application is for root filesystems on floppy disks, that
+The only application is for root filesystems on floppy disks, that
 should be loaded into memory. To do that, select the corresponding
 size of the disk as ramdisk size, and set the root device to the disk
 drive (with "root=").
 
 
 2.7) swap=
+
+  I can't find any sign of this option in 2.2.6.
+
 2.8) buff=
 -----------
 
-  I can't find any sign of these options in 2.2.6.
+  I can't find any sign of this option in 2.2.6.
 
 
 3) General Device Options (Amiga and Atari)
@@ -233,13 +247,13 @@ drive (with "root=").
 3.1) ether=
 -----------
 
-Syntax: ether=[<irq>[,<base_addr>[,<mem_start>[,<mem_end>]]]],<dev-name>
+:Syntax: ether=[<irq>[,<base_addr>[,<mem_start>[,<mem_end>]]]],<dev-name>
 
-  <dev-name> is the name of a net driver, as specified in
+<dev-name> is the name of a net driver, as specified in
 drivers/net/Space.c in the Linux source. Most prominent are eth0, ...
 eth3, sl0, ... sl3, ppp0, ..., ppp3, dummy, and lo.
 
-  The non-ethernet drivers (sl, ppp, dummy, lo) obviously ignore the
+The non-ethernet drivers (sl, ppp, dummy, lo) obviously ignore the
 settings by this options. Also, the existing ethernet drivers for
 Linux/m68k (ariadne, a2065, hydra) don't use them because Zorro boards
 are really Plug-'n-Play, so the "ether=" option is useless altogether
@@ -249,9 +263,9 @@ for Linux/m68k.
 3.2) hd=
 --------
 
-Syntax: hd=<cylinders>,<heads>,<sectors>
+:Syntax: hd=<cylinders>,<heads>,<sectors>
 
-  This option sets the disk geometry of an IDE disk. The first hd=
+This option sets the disk geometry of an IDE disk. The first hd=
 option is for the first IDE disk, the second for the second one.
 (I.e., you can give this option twice.) In most cases, you won't have
 to use this option, since the kernel can obtain the geometry data
@@ -262,9 +276,9 @@ disks.
 3.3) max_scsi_luns=
 -------------------
 
-Syntax: max_scsi_luns=<n>
+:Syntax: max_scsi_luns=<n>
 
-  Sets the maximum number of LUNs (logical units) of SCSI devices to
+Sets the maximum number of LUNs (logical units) of SCSI devices to
 be scanned. Valid values for <n> are between 1 and 8. Default is 8 if
 "Probe all LUNs on each SCSI device" was selected during the kernel
 configuration, else 1.
@@ -273,9 +287,9 @@ configuration, else 1.
 3.4) st=
 --------
 
-Syntax: st=<buffer_size>,[<write_thres>,[<max_buffers>]]
+:Syntax: st=<buffer_size>,[<write_thres>,[<max_buffers>]]
 
-  Sets several parameters of the SCSI tape driver. <buffer_size> is
+Sets several parameters of the SCSI tape driver. <buffer_size> is
 the number of 512-byte buffers reserved for tape operations for each
 device. <write_thres> sets the number of blocks which must be filled
 to start an actual write operation to the tape. Maximum value is the
@@ -286,9 +300,9 @@ buffers allocated for all tape devices.
 3.5) dmasound=
 --------------
 
-Syntax: dmasound=[<buffers>,<buffer-size>[,<catch-radius>]]
+:Syntax: dmasound=[<buffers>,<buffer-size>[,<catch-radius>]]
 
-  This option controls some configurations of the Linux/m68k DMA sound
+This option controls some configurations of the Linux/m68k DMA sound
 driver (Amiga and Atari): <buffers> is the number of buffers you want
 to use (minimum 4, default 4), <buffer-size> is the size of each
 buffer in kilobytes (minimum 4, default 32) and <catch-radius> says
@@ -305,20 +319,22 @@ don't need to expand the sound.
 4.1) video=
 -----------
 
-Syntax: video=<fbname>:<sub-options...>
+:Syntax: video=<fbname>:<sub-options...>
 
 The <fbname> parameter specifies the name of the frame buffer,
-eg. most atari users will want to specify `atafb' here. The
+eg. most atari users will want to specify `atafb` here. The
 <sub-options> is a comma-separated list of the sub-options listed
 below.
 
-NB: Please notice that this option was renamed from `atavideo' to
-    `video' during the development of the 1.3.x kernels, thus you
+NB:
+    Please notice that this option was renamed from `atavideo` to
+    `video` during the development of the 1.3.x kernels, thus you
     might need to update your boot-scripts if upgrading to 2.x from
     an 1.2.x kernel.
 
-NBB: The behavior of video= was changed in 2.1.57 so the recommended
-option is to specify the name of the frame buffer.
+NBB:
+    The behavior of video= was changed in 2.1.57 so the recommended
+    option is to specify the name of the frame buffer.
 
 4.1.1) Video Mode
 -----------------
@@ -341,11 +357,11 @@ mode, if the hardware allows. Currently defined names are:
  - falh2           : 896x608x1, Falcon only
  - falh16          : 896x608x4, Falcon only
 
-  If no video mode is given on the command line, the kernel tries the
+If no video mode is given on the command line, the kernel tries the
 modes names "default<n>" in turn, until one is possible with the
 hardware in use.
 
-  A video mode setting doesn't make sense, if the external driver is
+A video mode setting doesn't make sense, if the external driver is
 activated by a "external:" sub-option.
 
 4.1.2) inverse
@@ -358,17 +374,17 @@ option, you can make the background white.
 4.1.3) font
 -----------
 
-Syntax: font:<fontname>
+:Syntax: font:<fontname>
 
 Specify the font to use in text modes. Currently you can choose only
-between `VGA8x8', `VGA8x16' and `PEARL8x8'. `VGA8x8' is default, if the
+between `VGA8x8`, `VGA8x16` and `PEARL8x8`. `VGA8x8` is default, if the
 vertical size of the display is less than 400 pixel rows. Otherwise, the
-`VGA8x16' font is the default.
+`VGA8x16` font is the default.
 
-4.1.4) hwscroll_
-----------------
+4.1.4) `hwscroll_`
+------------------
 
-Syntax: hwscroll_<n>
+:Syntax: `hwscroll_<n>`
 
 The number of additional lines of video memory to reserve for
 speeding up the scrolling ("hardware scrolling"). Hardware scrolling
@@ -378,7 +394,7 @@ possible with plain STs and graphics cards (The former because the
 base address must be on a 256 byte boundary there, the latter because
 the kernel doesn't know how to set the base address at all.)
 
-  By default, <n> is set to the number of visible text lines on the
+By default, <n> is set to the number of visible text lines on the
 display. Thus, the amount of video memory is doubled, compared to no
 hardware scrolling. You can turn off the hardware scrolling altogether
 by setting <n> to 0.
@@ -386,31 +402,31 @@ by setting <n> to 0.
 4.1.5) internal:
 ----------------
 
-Syntax: internal:<xres>;<yres>[;<xres_max>;<yres_max>;<offset>]
+:Syntax: internal:<xres>;<yres>[;<xres_max>;<yres_max>;<offset>]
 
 This option specifies the capabilities of some extended internal video
 hardware, like e.g. OverScan. <xres> and <yres> give the (extended)
 dimensions of the screen.
 
-  If your OverScan needs a black border, you have to write the last
+If your OverScan needs a black border, you have to write the last
 three arguments of the "internal:". <xres_max> is the maximum line
 length the hardware allows, <yres_max> the maximum number of lines.
 <offset> is the offset of the visible part of the screen memory to its
 physical start, in bytes.
 
-  Often, extended interval video hardware has to be activated somehow.
+Often, extended interval video hardware has to be activated somehow.
 For this, see the "sw_*" options below.
 
 4.1.6) external:
 ----------------
 
-Syntax:
-  external:<xres>;<yres>;<depth>;<org>;<scrmem>[;<scrlen>[;<vgabase>\
-           [;<colw>[;<coltype>[;<xres_virtual>]]]]]
+:Syntax:
+  external:<xres>;<yres>;<depth>;<org>;<scrmem>[;<scrlen>[;<vgabase>
+  [;<colw>[;<coltype>[;<xres_virtual>]]]]]
 
-[I had to break this line...]
+.. I had to break this line...
 
-  This is probably the most complicated parameter... It specifies that
+This is probably the most complicated parameter... It specifies that
 you have some external video hardware (a graphics board), and how to
 use it under Linux/m68k. The kernel cannot know more about the hardware
 than you tell it here! The kernel also is unable to set or change any
@@ -418,38 +434,44 @@ video modes, since it doesn't know about any board internal. So, you
 have to switch to that video mode before you start Linux, and cannot
 switch to another mode once Linux has started.
 
-  The first 3 parameters of this sub-option should be obvious: <xres>,
+The first 3 parameters of this sub-option should be obvious: <xres>,
 <yres> and <depth> give the dimensions of the screen and the number of
 planes (depth). The depth is the logarithm to base 2 of the number
 of colors possible. (Or, the other way round: The number of colors is
 2^depth).
 
-  You have to tell the kernel furthermore how the video memory is
+You have to tell the kernel furthermore how the video memory is
 organized. This is done by a letter as <org> parameter:
 
- 'n': "normal planes", i.e. one whole plane after another
- 'i': "interleaved planes", i.e. 16 bit of the first plane, than 16 bit
+ 'n':
+      "normal planes", i.e. one whole plane after another
+ 'i':
+      "interleaved planes", i.e. 16 bit of the first plane, than 16 bit
       of the next, and so on... This mode is used only with the
-	  built-in Atari video modes, I think there is no card that
-	  supports this mode.
- 'p': "packed pixels", i.e. <depth> consecutive bits stand for all
-	  planes of one pixel; this is the most common mode for 8 planes
-	  (256 colors) on graphic cards
- 't': "true color" (more or less packed pixels, but without a color
-	  lookup table); usually depth is 24
+      built-in Atari video modes, I think there is no card that
+      supports this mode.
+ 'p':
+      "packed pixels", i.e. <depth> consecutive bits stand for all
+      planes of one pixel; this is the most common mode for 8 planes
+      (256 colors) on graphic cards
+ 't':
+      "true color" (more or less packed pixels, but without a color
+      lookup table); usually depth is 24
 
 For monochrome modes (i.e., <depth> is 1), the <org> letter has a
 different meaning:
 
- 'n': normal colors, i.e. 0=white, 1=black
- 'i': inverted colors, i.e. 0=black, 1=white
+ 'n':
+      normal colors, i.e. 0=white, 1=black
+ 'i':
+      inverted colors, i.e. 0=black, 1=white
 
-  The next important information about the video hardware is the base
+The next important information about the video hardware is the base
 address of the video memory. That is given in the <scrmem> parameter,
 as a hexadecimal number with a "0x" prefix. You have to find out this
 address in the documentation of your hardware.
 
-  The next parameter, <scrlen>, tells the kernel about the size of the
+The next parameter, <scrlen>, tells the kernel about the size of the
 video memory. If it's missing, the size is calculated from <xres>,
 <yres>, and <depth>. For now, it is not useful to write a value here.
 It would be used only for hardware scrolling (which isn't possible
@@ -460,7 +482,7 @@ empty, either by ending the "external:" after the video address or by
 writing two consecutive semicolons, if you want to give a <vgabase>
 (it is allowed to leave this parameter empty).
 
-  The <vgabase> parameter is optional. If it is not given, the kernel
+The <vgabase> parameter is optional. If it is not given, the kernel
 cannot read or write any color registers of the video hardware, and
 thus you have to set appropriate colors before you start Linux. But if
 your card is somehow VGA compatible, you can tell the kernel the base
@@ -472,18 +494,18 @@ uses the addresses vgabase+0x3c7...vgabase+0x3c9. The <vgabase>
 parameter is written in hexadecimal with a "0x" prefix, just as
 <scrmem>.
 
-  <colw> is meaningful only if <vgabase> is specified. It tells the
+<colw> is meaningful only if <vgabase> is specified. It tells the
 kernel how wide each of the color register is, i.e. the number of bits
 per single color (red/green/blue). Default is 6, another quite usual
 value is 8.
 
-  Also <coltype> is used together with <vgabase>. It tells the kernel
+Also <coltype> is used together with <vgabase>. It tells the kernel
 about the color register model of your gfx board. Currently, the types
 "vga" (which is also the default) and "mv300" (SANG MV300) are
 implemented.
 
-  Parameter <xres_virtual> is required for ProMST or ET4000 cards where
-the physical linelength differs from the visible length. With ProMST, 
+Parameter <xres_virtual> is required for ProMST or ET4000 cards where
+the physical linelength differs from the visible length. With ProMST,
 xres_virtual must be set to 2048. For ET4000, xres_virtual depends on the
 initialisation of the video-card.
 If you're missing a corresponding yres_virtual: the external part is legacy,
@@ -499,13 +521,13 @@ currently works only with the ScreenWonder!
 4.1.8) monitorcap:
 -------------------
 
-Syntax: monitorcap:<vmin>;<vmax>;<hmin>;<hmax>
+:Syntax: monitorcap:<vmin>;<vmax>;<hmin>;<hmax>
 
 This describes the capabilities of a multisync monitor. Don't use it
 with a fixed-frequency monitor! For now, only the Falcon frame buffer
 uses the settings of "monitorcap:".
 
-  <vmin> and <vmax> are the minimum and maximum, resp., vertical frequencies
+<vmin> and <vmax> are the minimum and maximum, resp., vertical frequencies
 your monitor can work with, in Hz. <hmin> and <hmax> are the same for
 the horizontal frequency, in kHz.
 
@@ -520,28 +542,28 @@ If this option is given, the framebuffer device doesn't do any video
 mode calculations and settings on its own. The only Atari fb device
 that does this currently is the Falcon.
 
-  What you reach with this: Settings for unknown video extensions
+What you reach with this: Settings for unknown video extensions
 aren't overridden by the driver, so you can still use the mode found
 when booting, when the driver doesn't know to set this mode itself.
 But this also means, that you can't switch video modes anymore...
 
-  An example where you may want to use "keep" is the ScreenBlaster for
+An example where you may want to use "keep" is the ScreenBlaster for
 the Falcon.
 
 
 4.2) atamouse=
 --------------
 
-Syntax: atamouse=<x-threshold>,[<y-threshold>]
+:Syntax: atamouse=<x-threshold>,[<y-threshold>]
 
-  With this option, you can set the mouse movement reporting threshold.
+With this option, you can set the mouse movement reporting threshold.
 This is the number of pixels of mouse movement that have to accumulate
 before the IKBD sends a new mouse packet to the kernel. Higher values
 reduce the mouse interrupt load and thus reduce the chance of keyboard
 overruns. Lower values give a slightly faster mouse responses and
 slightly better mouse tracking.
 
-  You can set the threshold in x and y separately, but usually this is
+You can set the threshold in x and y separately, but usually this is
 of little practical use. If there's just one number in the option, it
 is used for both dimensions. The default value is 2 for both
 thresholds.
@@ -550,7 +572,7 @@ thresholds.
 4.3) ataflop=
 -------------
 
-Syntax: ataflop=<drive type>[,<trackbuffering>[,<steprateA>[,<steprateB>]]]
+:Syntax: ataflop=<drive type>[,<trackbuffering>[,<steprateA>[,<steprateB>]]]
 
    The drive type may be 0, 1, or 2, for DD, HD, and ED, resp. This
    setting affects how many buffers are reserved and which formats are
@@ -563,15 +585,15 @@ Syntax: ataflop=<drive type>[,<trackbuffering>[,<steprateA>[,<steprateB>]]]
    no for the Medusa and yes for all others.
 
    With the two following parameters, you can change the default
-   steprate used for drive A and B, resp. 
+   steprate used for drive A and B, resp.
 
 
 4.4) atascsi=
 -------------
 
-Syntax: atascsi=<can_queue>[,<cmd_per_lun>[,<scat-gat>[,<host-id>[,<tagged>]]]]
+:Syntax: atascsi=<can_queue>[,<cmd_per_lun>[,<scat-gat>[,<host-id>[,<tagged>]]]]
 
-  This option sets some parameters for the Atari native SCSI driver.
+This option sets some parameters for the Atari native SCSI driver.
 Generally, any number of arguments can be omitted from the end. And
 for each of the numbers, a negative value means "use default". The
 defaults depend on whether TT-style or Falcon-style SCSI is used.
@@ -597,11 +619,14 @@ ignored (others aren't affected).
     32). Default: 8/1. (Note: Values > 1 seem to cause problems on a
     Falcon, cause not yet known.)
 
-      The <cmd_per_lun> value at a great part determines the amount of
+    The <cmd_per_lun> value at a great part determines the amount of
     memory SCSI reserves for itself. The formula is rather
     complicated, but I can give you some hints:
-      no scatter-gather  : cmd_per_lun * 232 bytes
-      full scatter-gather: cmd_per_lun * approx. 17 Kbytes
+
+      no scatter-gather:
+	cmd_per_lun * 232 bytes
+      full scatter-gather:
+	cmd_per_lun * approx. 17 Kbytes
 
   <scat-gat>:
     Size of the scatter-gather table, i.e. the number of requests
@@ -634,19 +659,23 @@ ignored (others aren't affected).
 4.5 switches=
 -------------
 
-Syntax: switches=<list of switches>
+:Syntax: switches=<list of switches>
 
-  With this option you can switch some hardware lines that are often
+With this option you can switch some hardware lines that are often
 used to enable/disable certain hardware extensions. Examples are
 OverScan, overclocking, ...
 
-  The <list of switches> is a comma-separated list of the following
+The <list of switches> is a comma-separated list of the following
 items:
 
-  ikbd: set RTS of the keyboard ACIA high
-  midi: set RTS of the MIDI ACIA high
-  snd6: set bit 6 of the PSG port A
-  snd7: set bit 6 of the PSG port A
+  ikbd:
+	set RTS of the keyboard ACIA high
+  midi:
+	set RTS of the MIDI ACIA high
+  snd6:
+	set bit 6 of the PSG port A
+  snd7:
+	set bit 6 of the PSG port A
 
 It doesn't make sense to mention a switch more than once (no
 difference to only once), but you can give as many switches as you
@@ -654,16 +683,16 @@ want to enable different features. The switch lines are set as early
 as possible during kernel initialization (even before determining the
 present hardware.)
 
-  All of the items can also be prefixed with "ov_", i.e. "ov_ikbd",
-"ov_midi", ... These options are meant for switching on an OverScan
+All of the items can also be prefixed with `ov_`, i.e. `ov_ikbd`,
+`ov_midi`, ... These options are meant for switching on an OverScan
 video extension. The difference to the bare option is that the
 switch-on is done after video initialization, and somehow synchronized
 to the HBLANK. A speciality is that ov_ikbd and ov_midi are switched
 off before rebooting, so that OverScan is disabled and TOS boots
 correctly.
 
-  If you give an option both, with and without the "ov_" prefix, the
-earlier initialization ("ov_"-less) takes precedence. But the
+If you give an option both, with and without the `ov_` prefix, the
+earlier initialization (`ov_`-less) takes precedence. But the
 switching-off on reset still happens in this case.
 
 5) Options for Amiga Only:
@@ -672,10 +701,10 @@ switching-off on reset still happens in this case.
 5.1) video=
 -----------
 
-Syntax: video=<fbname>:<sub-options...>
+:Syntax: video=<fbname>:<sub-options...>
 
 The <fbname> parameter specifies the name of the frame buffer, valid
-options are `amifb', `cyber', 'virge', `retz3' and `clgen', provided
+options are `amifb`, `cyber`, 'virge', `retz3` and `clgen`, provided
 that the respective frame buffer devices have been compiled into the
 kernel (or compiled as loadable modules). The behavior of the <fbname>
 option was changed in 2.1.57 so it is now recommended to specify this
@@ -697,9 +726,11 @@ predefined video modes are available:
 NTSC modes:
  - ntsc            : 640x200, 15 kHz, 60 Hz
  - ntsc-lace       : 640x400, 15 kHz, 60 Hz interlaced
+
 PAL modes:
  - pal             : 640x256, 15 kHz, 50 Hz
  - pal-lace        : 640x512, 15 kHz, 50 Hz interlaced
+
 ECS modes:
  - multiscan       : 640x480, 29 kHz, 57 Hz
  - multiscan-lace  : 640x960, 29 kHz, 57 Hz interlaced
@@ -715,6 +746,7 @@ ECS modes:
  - dblpal-lace     : 640x1024, 27 kHz, 47 Hz interlaced
  - dblntsc         : 640x200, 27 kHz, 57 Hz doublescan
  - dblpal          : 640x256, 27 kHz, 47 Hz doublescan
+
 VGA modes:
  - vga             : 640x480, 31 kHz, 60 Hz
  - vga70           : 640x400, 31 kHz, 70 Hz
@@ -726,7 +758,7 @@ chipset and 8-bit color for the AGA chipset.
 5.1.2) depth
 ------------
 
-Syntax: depth:<nr. of bit-planes>
+:Syntax: depth:<nr. of bit-planes>
 
 Specify the number of bit-planes for the selected video-mode.
 
@@ -739,32 +771,32 @@ Use inverted display (black on white). Functionally the same as the
 5.1.4) font
 -----------
 
-Syntax: font:<fontname>
+:Syntax: font:<fontname>
 
 Specify the font to use in text modes. Functionally the same as the
-"font" sub-option for the Atari, except that `PEARL8x8' is used instead
-of `VGA8x8' if the vertical size of the display is less than 400 pixel
+"font" sub-option for the Atari, except that `PEARL8x8` is used instead
+of `VGA8x8` if the vertical size of the display is less than 400 pixel
 rows.
 
 5.1.5) monitorcap:
 -------------------
 
-Syntax: monitorcap:<vmin>;<vmax>;<hmin>;<hmax>
+:Syntax: monitorcap:<vmin>;<vmax>;<hmin>;<hmax>
 
 This describes the capabilities of a multisync monitor. For now, only
 the color frame buffer uses the settings of "monitorcap:".
 
-  <vmin> and <vmax> are the minimum and maximum, resp., vertical frequencies
+<vmin> and <vmax> are the minimum and maximum, resp., vertical frequencies
 your monitor can work with, in Hz. <hmin> and <hmax> are the same for
 the horizontal frequency, in kHz.
 
-  The defaults are 50;90;15;38 (Generic Amiga multisync monitor).
+The defaults are 50;90;15;38 (Generic Amiga multisync monitor).
 
 
 5.2) fd_def_df0=
 ----------------
 
-Syntax: fd_def_df0=<value>
+:Syntax: fd_def_df0=<value>
 
 Sets the df0 value for "silent" floppy drives. The value should be in
 hexadecimal with "0x" prefix.
@@ -773,7 +805,7 @@ hexadecimal with "0x" prefix.
 5.3) wd33c93=
 -------------
 
-Syntax: wd33c93=<sub-options...>
+:Syntax: wd33c93=<sub-options...>
 
 These options affect the A590/A2091, A3000 and GVP Series II SCSI
 controllers.
@@ -784,9 +816,9 @@ below.
 5.3.1) nosync
 -------------
 
-Syntax: nosync:bitmask
+:Syntax: nosync:bitmask
 
-  bitmask is a byte where the 1st 7 bits correspond with the 7
+bitmask is a byte where the 1st 7 bits correspond with the 7
 possible SCSI devices. Set a bit to prevent sync negotiation on that
 device. To maintain backwards compatibility, a command-line such as
 "wd33c93=255" will be automatically translated to
@@ -796,35 +828,35 @@ all devices, eg. nosync:0xff.
 5.3.2) period
 -------------
 
-Syntax: period:ns
+:Syntax: period:ns
 
-  `ns' is the minimum # of nanoseconds in a SCSI data transfer
+`ns` is the minimum # of nanoseconds in a SCSI data transfer
 period. Default is 500; acceptable values are 250 - 1000.
 
 5.3.3) disconnect
 -----------------
 
-Syntax: disconnect:x
+:Syntax: disconnect:x
 
-  Specify x = 0 to never allow disconnects, 2 to always allow them.
+Specify x = 0 to never allow disconnects, 2 to always allow them.
 x = 1 does 'adaptive' disconnects, which is the default and generally
 the best choice.
 
 5.3.4) debug
 ------------
 
-Syntax: debug:x
+:Syntax: debug:x
 
-  If `DEBUGGING_ON' is defined, x is a bit mask that causes various
+If `DEBUGGING_ON` is defined, x is a bit mask that causes various
 types of debug output to printed - see the DB_xxx defines in
 wd33c93.h.
 
 5.3.5) clock
 ------------
 
-Syntax: clock:x
+:Syntax: clock:x
 
-  x = clock input in MHz for WD33c93 chip. Normal values would be from
+x = clock input in MHz for WD33c93 chip. Normal values would be from
 8 through 20. The default value depends on your hostadapter(s),
 default for the A3000 internal controller is 14, for the A2091 it's 8
 and for the GVP hostadapters it's either 8 or 14, depending on the
@@ -834,15 +866,15 @@ hostadapters.
 5.3.6) next
 -----------
 
-  No argument. Used to separate blocks of keywords when there's more
+No argument. Used to separate blocks of keywords when there's more
 than one wd33c93-based host adapter in the system.
 
 5.3.7) nodma
 ------------
 
-Syntax: nodma:x
+:Syntax: nodma:x
 
-  If x is 1 (or if the option is just written as "nodma"), the WD33c93
+If x is 1 (or if the option is just written as "nodma"), the WD33c93
 controller will not use DMA (= direct memory access) to access the
 Amiga's memory.  This is useful for some systems (like A3000's and
 A4000's with the A3640 accelerator, revision 3.0) that have problems
@@ -853,32 +885,27 @@ possible.
 5.4) gvp11=
 -----------
 
-Syntax: gvp11=<addr-mask>
+:Syntax: gvp11=<addr-mask>
 
-  The earlier versions of the GVP driver did not handle DMA
+The earlier versions of the GVP driver did not handle DMA
 address-mask settings correctly which made it necessary for some
 people to use this option, in order to get their GVP controller
 running under Linux. These problems have hopefully been solved and the
 use of this option is now highly unrecommended!
 
-  Incorrect use can lead to unpredictable behavior, so please only use
+Incorrect use can lead to unpredictable behavior, so please only use
 this option if you *know* what you are doing and have a reason to do
 so. In any case if you experience problems and need to use this
 option, please inform us about it by mailing to the Linux/68k kernel
 mailing list.
 
-  The address mask set by this option specifies which addresses are
+The address mask set by this option specifies which addresses are
 valid for DMA with the GVP Series II SCSI controller. An address is
 valid, if no bits are set except the bits that are set in the mask,
 too.
 
-  Some versions of the GVP can only DMA into a 24 bit address range,
+Some versions of the GVP can only DMA into a 24 bit address range,
 some can address a 25 bit address range while others can use the whole
 32 bit address range for DMA. The correct setting depends on your
 controller and should be autodetected by the driver. An example is the
 24 bit region which is specified by a mask of 0x00fffffe.
-
-
-/* Local Variables: */
-/* mode: text       */
-/* End:             */
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 44/79] docs: cma/debugfs.txt: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (41 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 43/79] docs: m68k: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 45/79] docs: console.txt: " Mauro Carvalho Chehab
                     ` (34 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet

The debugfs interface for CMA should be there together with other
mm-related documents.

Convert this small file to ReST and move it to its rightful place.

The conversion is actually quite simple: just add a title for the
document. In order to make it to look better for the audience,
also mark the "echo" command as a literal block.

While this is not part of any book, mark it as :orphan:,
in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/cma/{debugfs.txt => debugfs.rst} | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
 rename Documentation/cma/{debugfs.txt => debugfs.rst} (91%)

diff --git a/Documentation/cma/debugfs.txt b/Documentation/cma/debugfs.rst
similarity index 91%
rename from Documentation/cma/debugfs.txt
rename to Documentation/cma/debugfs.rst
index 6cef20a8cedc..518fe401b5ee 100644
--- a/Documentation/cma/debugfs.txt
+++ b/Documentation/cma/debugfs.rst
@@ -1,3 +1,9 @@
+:orphan:
+
+=====================
+CMA Debugfs Interface
+=====================
+
 The CMA debugfs interface is useful to retrieve basic information out of the
 different CMA areas and to test allocation/release in each of the areas.
 
@@ -12,7 +18,7 @@ The structure of the files created under that directory is as follows:
  - [RO] count: Amount of memory in the CMA area.
  - [RO] order_per_bit: Order of pages represented by one bit.
  - [RO] bitmap: The bitmap of page states in the zone.
- - [WO] alloc: Allocate N pages from that CMA area. For example:
+ - [WO] alloc: Allocate N pages from that CMA area. For example::
 
 	echo 5 > <debugfs>/cma/cma-2/alloc
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 45/79] docs: console.txt: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (42 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 44/79] docs: cma/debugfs.txt: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-05-06 13:41     ` Bartlomiej Zolnierkiewicz
  2019-04-22 13:27   ` [PATCH v2 46/79] docs: pti_intel_mid.txt: convert it to pti_intel_mid.rst Mauro Carvalho Chehab
                     ` (33 subsequent siblings)
  77 siblings, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Bartlomiej Zolnierkiewicz, Greg Kroah-Hartman,
	Jiri Slaby, dri-devel, linux-fbdev

Convert this small file to ReST in preparation for adding it to
the driver-api book.

While this is not part of the driver-api book, mark it as
:orphan:, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../console/{console.txt => console.rst}      | 63 ++++++++++---------
 Documentation/fb/fbcon.rst                    |  4 +-
 drivers/tty/Kconfig                           |  2 +-
 3 files changed, 38 insertions(+), 31 deletions(-)
 rename Documentation/console/{console.txt => console.rst} (80%)

diff --git a/Documentation/console/console.txt b/Documentation/console/console.rst
similarity index 80%
rename from Documentation/console/console.txt
rename to Documentation/console/console.rst
index d73c2ab4beda..b374141b027e 100644
--- a/Documentation/console/console.txt
+++ b/Documentation/console/console.rst
@@ -1,3 +1,6 @@
+:orphan:
+
+===============
 Console Drivers
 ===============
 
@@ -17,25 +20,26 @@ of driver occupying the consoles.) They can only take over the console that is
 occupied by the system driver. In the same token, if the modular driver is
 released by the console, the system driver will take over.
 
-Modular drivers, from the programmer's point of view, have to call:
+Modular drivers, from the programmer's point of view, have to call::
 
 	 do_take_over_console() - load and bind driver to console layer
 	 give_up_console() - unload driver; it will only work if driver
 			     is fully unbound
 
-In newer kernels, the following are also available:
+In newer kernels, the following are also available::
 
 	 do_register_con_driver()
 	 do_unregister_con_driver()
 
 If sysfs is enabled, the contents of /sys/class/vtconsole can be
 examined. This shows the console backends currently registered by the
-system which are named vtcon<n> where <n> is an integer from 0 to 15. Thus:
+system which are named vtcon<n> where <n> is an integer from 0 to 15.
+Thus::
 
        ls /sys/class/vtconsole
        .  ..  vtcon0  vtcon1
 
-Each directory in /sys/class/vtconsole has 3 files:
+Each directory in /sys/class/vtconsole has 3 files::
 
      ls /sys/class/vtconsole/vtcon0
      .  ..  bind  name  uevent
@@ -46,27 +50,29 @@ What do these files signify?
         read, or acts to bind or unbind the driver to the virtual consoles
         when written to. The possible values are:
 
-	0 - means the driver is not bound and if echo'ed, commands the driver
+	0
+	  - means the driver is not bound and if echo'ed, commands the driver
 	    to unbind
 
-        1 - means the driver is bound and if echo'ed, commands the driver to
+        1
+	  - means the driver is bound and if echo'ed, commands the driver to
 	    bind
 
-     2. name - read-only file. Shows the name of the driver in this format:
+     2. name - read-only file. Shows the name of the driver in this format::
 
-	cat /sys/class/vtconsole/vtcon0/name
-	(S) VGA+
+	  cat /sys/class/vtconsole/vtcon0/name
+	  (S) VGA+
 
-	    '(S)' stands for a (S)ystem driver, i.e., it cannot be directly
-	    commanded to bind or unbind
+	      '(S)' stands for a (S)ystem driver, i.e., it cannot be directly
+	      commanded to bind or unbind
 
-	    'VGA+' is the name of the driver
+	      'VGA+' is the name of the driver
 
-	cat /sys/class/vtconsole/vtcon1/name
-	(M) frame buffer device
+	  cat /sys/class/vtconsole/vtcon1/name
+	  (M) frame buffer device
 
-	    In this case, '(M)' stands for a (M)odular driver, one that can be
-	    directly commanded to bind or unbind.
+	      In this case, '(M)' stands for a (M)odular driver, one that can be
+	      directly commanded to bind or unbind.
 
      3. uevent - ignore this file
 
@@ -75,14 +81,17 @@ driver takes over the consoles vacated by the driver. Binding, on the other
 hand, will bind the driver to the consoles that are currently occupied by a
 system driver.
 
-NOTE1: Binding and unbinding must be selected in Kconfig. It's under:
+NOTE1:
+  Binding and unbinding must be selected in Kconfig. It's under::
 
-Device Drivers -> Character devices -> Support for binding and unbinding
-console drivers
+    Device Drivers ->
+	Character devices ->
+		Support for binding and unbinding console drivers
 
-NOTE2: If any of the virtual consoles are in KD_GRAPHICS mode, then binding or
-unbinding will not succeed. An example of an application that sets the console
-to KD_GRAPHICS is X.
+NOTE2:
+  If any of the virtual consoles are in KD_GRAPHICS mode, then binding or
+  unbinding will not succeed. An example of an application that sets the
+  console to KD_GRAPHICS is X.
 
 How useful is this feature? This is very useful for console driver
 developers. By unbinding the driver from the console layer, one can unload the
@@ -92,10 +101,10 @@ framebuffer console to VGA console and vice versa, this feature also makes
 this possible. (NOTE NOTE NOTE: Please read fbcon.txt under Documentation/fb
 for more details.)
 
-Notes for developers:
-=====================
+Notes for developers
+====================
 
-do_take_over_console() is now broken up into:
+do_take_over_console() is now broken up into::
 
      do_register_con_driver()
      do_bind_con_driver() - private function
@@ -104,7 +113,7 @@ give_up_console() is a wrapper to do_unregister_con_driver(), and a driver must
 be fully unbound for this call to succeed. con_is_bound() will check if the
 driver is bound or not.
 
-Guidelines for console driver writers:
+Guidelines for console driver writers
 =====================================
 
 In order for binding to and unbinding from the console to properly work,
@@ -140,6 +149,4 @@ The current crop of console drivers should still work correctly, but binding
 and unbinding them may cause problems. With minimal fixes, these drivers can
 be made to work correctly.
 
-==========================
 Antonino Daplas <adaplas@pol.net>
-
diff --git a/Documentation/fb/fbcon.rst b/Documentation/fb/fbcon.rst
index cfb9f7c38f18..22112718dd5d 100644
--- a/Documentation/fb/fbcon.rst
+++ b/Documentation/fb/fbcon.rst
@@ -187,7 +187,7 @@ the hardware. Thus, in a VGA console::
 Assuming the VGA driver can be unloaded, one must first unbind the VGA driver
 from the console layer before unloading the driver.  The VGA driver cannot be
 unloaded if it is still bound to the console layer. (See
-Documentation/console/console.txt for more information).
+Documentation/console/console.rst for more information).
 
 This is more complicated in the case of the framebuffer console (fbcon),
 because fbcon is an intermediate layer between the console and the drivers::
@@ -204,7 +204,7 @@ fbcon. Thus, there is no need to explicitly unbind the fbdev drivers from
 fbcon.
 
 So, how do we unbind fbcon from the console? Part of the answer is in
-Documentation/console/console.txt. To summarize:
+Documentation/console/console.rst. To summarize:
 
 Echo a value to the bind file that represents the framebuffer console
 driver. So assuming vtcon1 represents fbcon, then::
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index 957db30b9ecb..c30bfc95e03c 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -94,7 +94,7 @@ config VT_HW_CONSOLE_BINDING
          select the console driver that will serve as the backend for the
          virtual terminals.
 
-	 See <file:Documentation/console/console.txt> for more
+	 See <file:Documentation/console/console.rst> for more
 	 information. For framebuffer console users, please refer to
 	 <file:Documentation/fb/fbcon.rst>.
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 46/79] docs: pti_intel_mid.txt: convert it to pti_intel_mid.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (43 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 45/79] docs: console.txt: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 47/79] docs: early-userspace: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
                     ` (32 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet

Convert this small file to ReST format and rename it.

Most of the conversion were related to adjusting whitespaces
in order for each section to be properly parsed.

While this is not part of any book, mark it as :orphan:, in order
to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/pti/pti_intel_mid.rst | 106 ++++++++++++++++++++++++++++
 Documentation/pti/pti_intel_mid.txt |  99 --------------------------
 2 files changed, 106 insertions(+), 99 deletions(-)
 create mode 100644 Documentation/pti/pti_intel_mid.rst
 delete mode 100644 Documentation/pti/pti_intel_mid.txt

diff --git a/Documentation/pti/pti_intel_mid.rst b/Documentation/pti/pti_intel_mid.rst
new file mode 100644
index 000000000000..ea05725174cb
--- /dev/null
+++ b/Documentation/pti/pti_intel_mid.rst
@@ -0,0 +1,106 @@
+:orphan:
+
+=============
+Intel MID PTI
+=============
+
+The Intel MID PTI project is HW implemented in Intel Atom
+system-on-a-chip designs based on the Parallel Trace
+Interface for MIPI P1149.7 cJTAG standard.  The kernel solution
+for this platform involves the following files::
+
+	./include/linux/pti.h
+	./drivers/.../n_tracesink.h
+	./drivers/.../n_tracerouter.c
+	./drivers/.../n_tracesink.c
+	./drivers/.../pti.c
+
+pti.c is the driver that enables various debugging features
+popular on platforms from certain mobile manufacturers.
+n_tracerouter.c and n_tracesink.c allow extra system information to
+be collected and routed to the pti driver, such as trace
+debugging data from a modem.  Although n_tracerouter
+and n_tracesink are a part of the complete PTI solution,
+these two line disciplines can work separately from
+pti.c and route any data stream from one /dev/tty node
+to another /dev/tty node via kernel-space.  This provides
+a stable, reliable connection that will not break unless
+the user-space application shuts down (plus avoids
+kernel->user->kernel context switch overheads of routing
+data).
+
+An example debugging usage for this driver system:
+
+  * Hook /dev/ttyPTI0 to syslogd.  Opening this port will also start
+    a console device to further capture debugging messages to PTI.
+  * Hook /dev/ttyPTI1 to modem debugging data to write to PTI HW.
+    This is where n_tracerouter and n_tracesink are used.
+  * Hook /dev/pti to a user-level debugging application for writing
+    to PTI HW.
+  * `Use mipi_` Kernel Driver API in other device drivers for
+    debugging to PTI by first requesting a PTI write address via
+    mipi_request_masterchannel(1).
+
+Below is example pseudo-code on how a 'privileged' application
+can hook up n_tracerouter and n_tracesink to any tty on
+a system.  'Privileged' means the application has enough
+privileges to successfully manipulate the ldisc drivers
+but is not just blindly executing as 'root'. Keep in mind
+the use of ioctl(,TIOCSETD,) is not specific to the n_tracerouter
+and n_tracesink line discpline drivers but is a generic
+operation for a program to use a line discpline driver
+on a tty port other than the default n_tty::
+
+  /////////// To hook up n_tracerouter and n_tracesink /////////
+
+  // Note that n_tracerouter depends on n_tracesink.
+  #include <errno.h>
+  #define ONE_TTY "/dev/ttyOne"
+  #define TWO_TTY "/dev/ttyTwo"
+
+  // needed global to hand onto ldisc connection
+  static int g_fd_source = -1;
+  static int g_fd_sink  = -1;
+
+  // these two vars used to grab LDISC values from loaded ldisc drivers
+  // in OS.  Look at /proc/tty/ldiscs to get the right numbers from
+  // the ldiscs loaded in the system.
+  int source_ldisc_num, sink_ldisc_num = -1;
+  int retval;
+
+  g_fd_source = open(ONE_TTY, O_RDWR); // must be R/W
+  g_fd_sink   = open(TWO_TTY, O_RDWR); // must be R/W
+
+  if (g_fd_source <= 0) || (g_fd_sink <= 0) {
+     // doubt you'll want to use these exact error lines of code
+     printf("Error on open(). errno: %d\n",errno);
+     return errno;
+  }
+
+  retval = ioctl(g_fd_sink, TIOCSETD, &sink_ldisc_num);
+  if (retval < 0) {
+     printf("Error on ioctl().  errno: %d\n", errno);
+     return errno;
+  }
+
+  retval = ioctl(g_fd_source, TIOCSETD, &source_ldisc_num);
+  if (retval < 0) {
+     printf("Error on ioctl().  errno: %d\n", errno);
+     return errno;
+  }
+
+  /////////// To disconnect n_tracerouter and n_tracesink ////////
+
+  // First make sure data through the ldiscs has stopped.
+
+  // Second, disconnect ldiscs.  This provides a
+  // little cleaner shutdown on tty stack.
+  sink_ldisc_num = 0;
+  source_ldisc_num = 0;
+  ioctl(g_fd_uart, TIOCSETD, &sink_ldisc_num);
+  ioctl(g_fd_gadget, TIOCSETD, &source_ldisc_num);
+
+  // Three, program closes connection, and cleanup:
+  close(g_fd_uart);
+  close(g_fd_gadget);
+  g_fd_uart = g_fd_gadget = NULL;
diff --git a/Documentation/pti/pti_intel_mid.txt b/Documentation/pti/pti_intel_mid.txt
deleted file mode 100644
index e7a5b6d1f7a9..000000000000
--- a/Documentation/pti/pti_intel_mid.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-The Intel MID PTI project is HW implemented in Intel Atom
-system-on-a-chip designs based on the Parallel Trace
-Interface for MIPI P1149.7 cJTAG standard.  The kernel solution
-for this platform involves the following files:
-
-./include/linux/pti.h
-./drivers/.../n_tracesink.h
-./drivers/.../n_tracerouter.c
-./drivers/.../n_tracesink.c
-./drivers/.../pti.c
-
-pti.c is the driver that enables various debugging features
-popular on platforms from certain mobile manufacturers.
-n_tracerouter.c and n_tracesink.c allow extra system information to
-be collected and routed to the pti driver, such as trace
-debugging data from a modem.  Although n_tracerouter
-and n_tracesink are a part of the complete PTI solution,
-these two line disciplines can work separately from
-pti.c and route any data stream from one /dev/tty node
-to another /dev/tty node via kernel-space.  This provides
-a stable, reliable connection that will not break unless
-the user-space application shuts down (plus avoids
-kernel->user->kernel context switch overheads of routing
-data).
-
-An example debugging usage for this driver system:
-   *Hook /dev/ttyPTI0 to syslogd.  Opening this port will also start
-    a console device to further capture debugging messages to PTI.
-   *Hook /dev/ttyPTI1 to modem debugging data to write to PTI HW.
-    This is where n_tracerouter and n_tracesink are used.
-   *Hook /dev/pti to a user-level debugging application for writing
-    to PTI HW.
-   *Use mipi_* Kernel Driver API in other device drivers for
-    debugging to PTI by first requesting a PTI write address via
-    mipi_request_masterchannel(1).
-
-Below is example pseudo-code on how a 'privileged' application
-can hook up n_tracerouter and n_tracesink to any tty on
-a system.  'Privileged' means the application has enough
-privileges to successfully manipulate the ldisc drivers
-but is not just blindly executing as 'root'. Keep in mind
-the use of ioctl(,TIOCSETD,) is not specific to the n_tracerouter
-and n_tracesink line discpline drivers but is a generic
-operation for a program to use a line discpline driver
-on a tty port other than the default n_tty.
-
-/////////// To hook up n_tracerouter and n_tracesink /////////
-
-// Note that n_tracerouter depends on n_tracesink.
-#include <errno.h>
-#define ONE_TTY "/dev/ttyOne"
-#define TWO_TTY "/dev/ttyTwo"
-
-// needed global to hand onto ldisc connection
-static int g_fd_source = -1;
-static int g_fd_sink  = -1;
-
-// these two vars used to grab LDISC values from loaded ldisc drivers
-// in OS.  Look at /proc/tty/ldiscs to get the right numbers from
-// the ldiscs loaded in the system.
-int source_ldisc_num, sink_ldisc_num = -1;
-int retval;
-
-g_fd_source = open(ONE_TTY, O_RDWR); // must be R/W
-g_fd_sink   = open(TWO_TTY, O_RDWR); // must be R/W
-
-if (g_fd_source <= 0) || (g_fd_sink <= 0) {
-   // doubt you'll want to use these exact error lines of code
-   printf("Error on open(). errno: %d\n",errno);
-   return errno;
-}
-
-retval = ioctl(g_fd_sink, TIOCSETD, &sink_ldisc_num);
-if (retval < 0) {
-   printf("Error on ioctl().  errno: %d\n", errno);
-   return errno;
-}
-
-retval = ioctl(g_fd_source, TIOCSETD, &source_ldisc_num);
-if (retval < 0) {
-   printf("Error on ioctl().  errno: %d\n", errno);
-   return errno;
-}
-
-/////////// To disconnect n_tracerouter and n_tracesink ////////
-
-// First make sure data through the ldiscs has stopped.
-
-// Second, disconnect ldiscs.  This provides a
-// little cleaner shutdown on tty stack.
-sink_ldisc_num = 0;
-source_ldisc_num = 0;
-ioctl(g_fd_uart, TIOCSETD, &sink_ldisc_num);
-ioctl(g_fd_gadget, TIOCSETD, &source_ldisc_num);
-
-// Three, program closes connection, and cleanup:
-close(g_fd_uart);
-close(g_fd_gadget);
-g_fd_uart = g_fd_gadget = NULL;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 47/79] docs: early-userspace: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (44 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 46/79] docs: pti_intel_mid.txt: convert it to pti_intel_mid.rst Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 48/79] docs: driver-model: " Mauro Carvalho Chehab
                     ` (31 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet

The two files there describes a Kernel API feature, used to
support early userspace stuff. Prepare for moving them to
the kernel API book by converting to ReST format.

The conversion itself was quite trivial: just add/mark a few
titles as such, add a literal block markup, add a table markup
and a few blank lines, in order to make Sphinx to properly parse it.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../{buffer-format.txt => buffer-format.rst}  | 19 +++++++++++++------
 .../{README => early_userspace_support.rst}   |  3 +++
 Documentation/early-userspace/index.rst       | 18 ++++++++++++++++++
 Documentation/filesystems/nfs/nfsroot.txt     |  2 +-
 .../filesystems/ramfs-rootfs-initramfs.txt    |  4 ++--
 usr/Kconfig                                   |  2 +-
 6 files changed, 38 insertions(+), 10 deletions(-)
 rename Documentation/early-userspace/{buffer-format.txt => buffer-format.rst} (91%)
 rename Documentation/early-userspace/{README => early_userspace_support.rst} (99%)
 create mode 100644 Documentation/early-userspace/index.rst

diff --git a/Documentation/early-userspace/buffer-format.txt b/Documentation/early-userspace/buffer-format.rst
similarity index 91%
rename from Documentation/early-userspace/buffer-format.txt
rename to Documentation/early-userspace/buffer-format.rst
index e1fd7f9dad16..7f74e301fdf3 100644
--- a/Documentation/early-userspace/buffer-format.txt
+++ b/Documentation/early-userspace/buffer-format.rst
@@ -1,8 +1,10 @@
-		       initramfs buffer format
-		       -----------------------
+=======================
+initramfs buffer format
+=======================
 
-		       Al Viro, H. Peter Anvin
-		      Last revision: 2002-01-13
+Al Viro, H. Peter Anvin
+
+Last revision: 2002-01-13
 
 Starting with kernel 2.5.x, the old "initial ramdisk" protocol is
 getting {replaced/complemented} with the new "initial ramfs"
@@ -18,7 +20,8 @@ archive can be compressed using gzip(1).  One valid version of an
 initramfs buffer is thus a single .cpio.gz file.
 
 The full format of the initramfs buffer is defined by the following
-grammar, where:
+grammar, where::
+
 	*	is used to indicate "0 or more occurrences of"
 	(|)	indicates alternatives
 	+	indicates concatenation
@@ -49,7 +52,9 @@ hexadecimal ASCII numbers fully padded with '0' on the left to the
 full width of the field, for example, the integer 4780 is represented
 by the ASCII string "000012ac"):
 
+============= ================== ==============================================
 Field name    Field size	 Meaning
+============= ================== ==============================================
 c_magic	      6 bytes		 The string "070701" or "070702"
 c_ino	      8 bytes		 File inode number
 c_mode	      8 bytes		 File mode and permissions
@@ -65,6 +70,7 @@ c_rmin	      8 bytes		 Minor part of device node reference
 c_namesize    8 bytes		 Length of filename, including final \0
 c_chksum      8 bytes		 Checksum of data field if c_magic is 070702;
 				 otherwise zero
+============= ================== ==============================================
 
 The c_mode field matches the contents of st_mode returned by stat(2)
 on Linux, and encodes the file type and file permissions.
@@ -82,7 +88,8 @@ If the filename is "TRAILER!!!" this is actually an end-of-archive
 marker; the c_filesize for an end-of-archive marker must be zero.
 
 
-*** Handling of hard links
+Handling of hard links
+======================
 
 When a nondirectory with c_nlink > 1 is seen, the (c_maj,c_min,c_ino)
 tuple is looked up in a tuple buffer.  If not found, it is entered in
diff --git a/Documentation/early-userspace/README b/Documentation/early-userspace/early_userspace_support.rst
similarity index 99%
rename from Documentation/early-userspace/README
rename to Documentation/early-userspace/early_userspace_support.rst
index 955d667dc87e..3deefb34046b 100644
--- a/Documentation/early-userspace/README
+++ b/Documentation/early-userspace/early_userspace_support.rst
@@ -1,3 +1,4 @@
+=======================
 Early userspace support
 =======================
 
@@ -26,6 +27,7 @@ archive to be used as the image or have the kernel build process build
 the image from specifications.
 
 CPIO ARCHIVE method
+-------------------
 
 You can create a cpio archive that contains the early userspace image.
 Your cpio archive should be specified in CONFIG_INITRAMFS_SOURCE and it
@@ -34,6 +36,7 @@ CONFIG_INITRAMFS_SOURCE and directory and file names are not allowed in
 combination with a cpio archive.
 
 IMAGE BUILDING method
+---------------------
 
 The kernel build process can also build an early userspace image from
 source parts rather than supplying a cpio archive.  This method provides
diff --git a/Documentation/early-userspace/index.rst b/Documentation/early-userspace/index.rst
new file mode 100644
index 000000000000..2b8eb6132058
--- /dev/null
+++ b/Documentation/early-userspace/index.rst
@@ -0,0 +1,18 @@
+:orphan:
+
+===============
+Early Userspace
+===============
+
+.. toctree::
+    :maxdepth: 1
+
+    early_userspace_support
+    buffer-format
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/filesystems/nfs/nfsroot.txt b/Documentation/filesystems/nfs/nfsroot.txt
index d2963123eb1c..4862d3d77e27 100644
--- a/Documentation/filesystems/nfs/nfsroot.txt
+++ b/Documentation/filesystems/nfs/nfsroot.txt
@@ -239,7 +239,7 @@ rdinit=<executable file>
   A description of the process of mounting the root file system can be
   found in:
 
-    Documentation/early-userspace/README
+    Documentation/early-userspace/early_userspace_support.rst
 
 
 
diff --git a/Documentation/filesystems/ramfs-rootfs-initramfs.txt b/Documentation/filesystems/ramfs-rootfs-initramfs.txt
index 79637d227e85..fa985909dbca 100644
--- a/Documentation/filesystems/ramfs-rootfs-initramfs.txt
+++ b/Documentation/filesystems/ramfs-rootfs-initramfs.txt
@@ -105,7 +105,7 @@ All this differs from the old initrd in several ways:
   - The old initrd file was a gzipped filesystem image (in some file format,
     such as ext2, that needed a driver built into the kernel), while the new
     initramfs archive is a gzipped cpio archive (like tar only simpler,
-    see cpio(1) and Documentation/early-userspace/buffer-format.txt).  The
+    see cpio(1) and Documentation/early-userspace/buffer-format.rst).  The
     kernel's cpio extraction code is not only extremely small, it's also
     __init text and data that can be discarded during the boot process.
 
@@ -159,7 +159,7 @@ One advantage of the configuration file is that root access is not required to
 set permissions or create device nodes in the new archive.  (Note that those
 two example "file" entries expect to find files named "init.sh" and "busybox" in
 a directory called "initramfs", under the linux-2.6.* directory.  See
-Documentation/early-userspace/README for more details.)
+Documentation/early-userspace/early_userspace_support.rst for more details.)
 
 The kernel does not depend on external cpio tools.  If you specify a
 directory instead of a configuration file, the kernel's build infrastructure
diff --git a/usr/Kconfig b/usr/Kconfig
index 43658b8a975e..86e37e297278 100644
--- a/usr/Kconfig
+++ b/usr/Kconfig
@@ -18,7 +18,7 @@ config INITRAMFS_SOURCE
 	  When multiple directories and files are specified then the
 	  initramfs image will be the aggregate of all of them.
 
-	  See <file:Documentation/early-userspace/README> for more details.
+	  See <file:Documentation/early-userspace/early_userspace_support.rst> for more details.
 
 	  If you are not sure, leave it blank.
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 48/79] docs: driver-model: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (45 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 47/79] docs: early-userspace: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 14:47     ` Julia Lawall
  2019-04-22 22:30     ` Guenter Roeck
  2019-04-22 13:27   ` [PATCH v2 50/79] docs: memory-devices: convert ti-emif.txt to ReST Mauro Carvalho Chehab
                     ` (30 subsequent siblings)
  77 siblings, 2 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Linus Walleij, Bartosz Golaszewski,
	Jean Delvare, Guenter Roeck, Greg Kroah-Hartman,
	Rafael J. Wysocki, Jeff Kirsher, David S. Miller, Julia Lawall,
	Gilles Muller, Nicolas Palix, Michal Marek, linux-gpio,
	linux-hwmon, intel-wired-lan, netdev, cocci

Convert the various documents at the driver-model, preparing
them to be part of the driver-api book.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/driver-api/gpio/driver.rst      |   2 +-
 .../driver-model/{binding.txt => binding.rst} |  20 +-
 .../driver-model/{bus.txt => bus.rst}         |  69 ++--
 .../driver-model/{class.txt => class.rst}     |  74 ++--
 ...esign-patterns.txt => design-patterns.rst} | 106 +++---
 .../driver-model/{device.txt => device.rst}   |  57 +--
 .../driver-model/{devres.txt => devres.rst}   |  50 +--
 .../driver-model/{driver.txt => driver.rst}   | 112 +++---
 Documentation/driver-model/index.rst          |  26 ++
 .../{overview.txt => overview.rst}            |  37 +-
 .../{platform.txt => platform.rst}            |  30 +-
 .../driver-model/{porting.txt => porting.rst} | 333 +++++++++---------
 Documentation/eisa.txt                        |   4 +-
 Documentation/hwmon/submitting-patches.rst    |   2 +-
 drivers/base/platform.c                       |   2 +-
 drivers/gpio/gpio-cs5535.c                    |   2 +-
 drivers/net/ethernet/intel/ice/ice_main.c     |   2 +-
 scripts/coccinelle/free/devm_free.cocci       |   2 +-
 18 files changed, 489 insertions(+), 441 deletions(-)
 rename Documentation/driver-model/{binding.txt => binding.rst} (92%)
 rename Documentation/driver-model/{bus.txt => bus.rst} (76%)
 rename Documentation/driver-model/{class.txt => class.rst} (75%)
 rename Documentation/driver-model/{design-patterns.txt => design-patterns.rst} (59%)
 rename Documentation/driver-model/{device.txt => device.rst} (71%)
 rename Documentation/driver-model/{devres.txt => devres.rst} (93%)
 rename Documentation/driver-model/{driver.txt => driver.rst} (75%)
 create mode 100644 Documentation/driver-model/index.rst
 rename Documentation/driver-model/{overview.txt => overview.rst} (90%)
 rename Documentation/driver-model/{platform.txt => platform.rst} (95%)
 rename Documentation/driver-model/{porting.txt => porting.rst} (62%)

diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst
index 3043167fc557..0eb083baab9e 100644
--- a/Documentation/driver-api/gpio/driver.rst
+++ b/Documentation/driver-api/gpio/driver.rst
@@ -303,7 +303,7 @@ symbol:
   the struct gpio_chip* for the chip to all IRQ callbacks, so the callbacks
   need to embed the gpio_chip in its state container and obtain a pointer
   to the container using container_of().
-  (See Documentation/driver-model/design-patterns.txt)
+  (See Documentation/driver-model/design-patterns.rst)
 
 * gpiochip_irqchip_add_nested(): adds a nested irqchip to a gpiochip.
   Apart from that it works exactly like the chained irqchip.
diff --git a/Documentation/driver-model/binding.txt b/Documentation/driver-model/binding.rst
similarity index 92%
rename from Documentation/driver-model/binding.txt
rename to Documentation/driver-model/binding.rst
index abfc8e290d53..7ea1d7a41e1d 100644
--- a/Documentation/driver-model/binding.txt
+++ b/Documentation/driver-model/binding.rst
@@ -1,5 +1,6 @@
-
+==============
 Driver Binding
+==============
 
 Driver binding is the process of associating a device with a device
 driver that can control it. Bus drivers have typically handled this
@@ -25,7 +26,7 @@ device_register
 When a new device is added, the bus's list of drivers is iterated over
 to find one that supports it. In order to determine that, the device
 ID of the device must match one of the device IDs that the driver
-supports. The format and semantics for comparing IDs is bus-specific. 
+supports. The format and semantics for comparing IDs is bus-specific.
 Instead of trying to derive a complex state machine and matching
 algorithm, it is up to the bus driver to provide a callback to compare
 a device against the IDs of a driver. The bus returns 1 if a match was
@@ -36,14 +37,14 @@ int match(struct device * dev, struct device_driver * drv);
 If a match is found, the device's driver field is set to the driver
 and the driver's probe callback is called. This gives the driver a
 chance to verify that it really does support the hardware, and that
-it's in a working state. 
+it's in a working state.
 
 Device Class
 ~~~~~~~~~~~~
 
 Upon the successful completion of probe, the device is registered with
 the class to which it belongs. Device drivers belong to one and only one
-class, and that is set in the driver's devclass field. 
+class, and that is set in the driver's devclass field.
 devclass_add_device is called to enumerate the device within the class
 and actually register it with the class, which happens with the
 class's register_dev callback.
@@ -53,7 +54,7 @@ Driver
 ~~~~~~
 
 When a driver is attached to a device, the device is inserted into the
-driver's list of devices. 
+driver's list of devices.
 
 
 sysfs
@@ -67,18 +68,18 @@ to the device's directory in the physical hierarchy.
 
 A directory for the device is created in the class's directory. A
 symlink is created in that directory that points to the device's
-physical location in the sysfs tree. 
+physical location in the sysfs tree.
 
 A symlink can be created (though this isn't done yet) in the device's
 physical directory to either its class directory, or the class's
 top-level directory. One can also be created to point to its driver's
-directory also. 
+directory also.
 
 
 driver_register
 ~~~~~~~~~~~~~~~
 
-The process is almost identical for when a new driver is added. 
+The process is almost identical for when a new driver is added.
 The bus's list of devices is iterated over to find a match. Devices
 that already have a driver are skipped. All the devices are iterated
 over, to bind as many devices as possible to the driver.
@@ -94,5 +95,4 @@ of the driver is decremented. All symlinks between the two are removed.
 
 When a driver is removed, the list of devices that it supports is
 iterated over, and the driver's remove callback is called for each
-one. The device is removed from that list and the symlinks removed. 
-
+one. The device is removed from that list and the symlinks removed.
diff --git a/Documentation/driver-model/bus.txt b/Documentation/driver-model/bus.rst
similarity index 76%
rename from Documentation/driver-model/bus.txt
rename to Documentation/driver-model/bus.rst
index c247b488a567..016b15a6e8ea 100644
--- a/Documentation/driver-model/bus.txt
+++ b/Documentation/driver-model/bus.rst
@@ -1,5 +1,6 @@
-
-Bus Types 
+=========
+Bus Types
+=========
 
 Definition
 ~~~~~~~~~~
@@ -13,12 +14,12 @@ Declaration
 
 Each bus type in the kernel (PCI, USB, etc) should declare one static
 object of this type. They must initialize the name field, and may
-optionally initialize the match callback.
+optionally initialize the match callback::
 
-struct bus_type pci_bus_type = {
-       .name	= "pci",
-       .match	= pci_bus_match,
-};
+   struct bus_type pci_bus_type = {
+          .name	= "pci",
+          .match	= pci_bus_match,
+   };
 
 The structure should be exported to drivers in a header file:
 
@@ -30,8 +31,8 @@ Registration
 
 When a bus driver is initialized, it calls bus_register. This
 initializes the rest of the fields in the bus object and inserts it
-into a global list of bus types. Once the bus object is registered, 
-the fields in it are usable by the bus driver. 
+into a global list of bus types. Once the bus object is registered,
+the fields in it are usable by the bus driver.
 
 
 Callbacks
@@ -43,17 +44,17 @@ match(): Attaching Drivers to Devices
 The format of device ID structures and the semantics for comparing
 them are inherently bus-specific. Drivers typically declare an array
 of device IDs of devices they support that reside in a bus-specific
-driver structure. 
+driver structure.
 
 The purpose of the match callback is to give the bus an opportunity to
 determine if a particular driver supports a particular device by
 comparing the device IDs the driver supports with the device ID of a
 particular device, without sacrificing bus-specific functionality or
-type-safety. 
+type-safety.
 
 When a driver is registered with the bus, the bus's list of devices is
 iterated over, and the match callback is called for each device that
-does not have a driver associated with it. 
+does not have a driver associated with it.
 
 
 
@@ -64,22 +65,23 @@ The lists of devices and drivers are intended to replace the local
 lists that many buses keep. They are lists of struct devices and
 struct device_drivers, respectively. Bus drivers are free to use the
 lists as they please, but conversion to the bus-specific type may be
-necessary. 
+necessary.
 
-The LDM core provides helper functions for iterating over each list.
+The LDM core provides helper functions for iterating over each list::
 
-int bus_for_each_dev(struct bus_type * bus, struct device * start, void * data,
-		     int (*fn)(struct device *, void *));
+  int bus_for_each_dev(struct bus_type * bus, struct device * start,
+		       void * data,
+		       int (*fn)(struct device *, void *));
 
-int bus_for_each_drv(struct bus_type * bus, struct device_driver * start, 
-		     void * data, int (*fn)(struct device_driver *, void *));
+  int bus_for_each_drv(struct bus_type * bus, struct device_driver * start,
+		       void * data, int (*fn)(struct device_driver *, void *));
 
 These helpers iterate over the respective list, and call the callback
 for each device or driver in the list. All list accesses are
 synchronized by taking the bus's lock (read currently). The reference
 count on each object in the list is incremented before the callback is
 called; it is decremented after the next object has been obtained. The
-lock is not held when calling the callback. 
+lock is not held when calling the callback.
 
 
 sysfs
@@ -87,14 +89,14 @@ sysfs
 There is a top-level directory named 'bus'.
 
 Each bus gets a directory in the bus directory, along with two default
-directories:
+directories::
 
 	/sys/bus/pci/
 	|-- devices
 	`-- drivers
 
 Drivers registered with the bus get a directory in the bus's drivers
-directory:
+directory::
 
 	/sys/bus/pci/
 	|-- devices
@@ -106,7 +108,7 @@ directory:
 
 Each device that is discovered on a bus of that type gets a symlink in
 the bus's devices directory to the device's directory in the physical
-hierarchy:
+hierarchy::
 
 	/sys/bus/pci/
 	|-- devices
@@ -118,26 +120,27 @@ hierarchy:
 
 Exporting Attributes
 ~~~~~~~~~~~~~~~~~~~~
-struct bus_attribute {
+
+::
+
+  struct bus_attribute {
 	struct attribute	attr;
 	ssize_t (*show)(struct bus_type *, char * buf);
 	ssize_t (*store)(struct bus_type *, const char * buf, size_t count);
-};
+  };
 
 Bus drivers can export attributes using the BUS_ATTR_RW macro that works
 similarly to the DEVICE_ATTR_RW macro for devices. For example, a
-definition like this:
+definition like this::
 
-static BUS_ATTR_RW(debug);
+	static BUS_ATTR_RW(debug);
 
-is equivalent to declaring:
+is equivalent to declaring::
 
-static bus_attribute bus_attr_debug;
+	static bus_attribute bus_attr_debug;
 
 This can then be used to add and remove the attribute from the bus's
-sysfs directory using:
-
-int bus_create_file(struct bus_type *, struct bus_attribute *);
-void bus_remove_file(struct bus_type *, struct bus_attribute *);
-
+sysfs directory using::
 
+	int bus_create_file(struct bus_type *, struct bus_attribute *);
+	void bus_remove_file(struct bus_type *, struct bus_attribute *);
diff --git a/Documentation/driver-model/class.txt b/Documentation/driver-model/class.rst
similarity index 75%
rename from Documentation/driver-model/class.txt
rename to Documentation/driver-model/class.rst
index 1fefc480a80b..fff55b80e86a 100644
--- a/Documentation/driver-model/class.txt
+++ b/Documentation/driver-model/class.rst
@@ -1,6 +1,6 @@
-
+==============
 Device Classes
-
+==============
 
 Introduction
 ~~~~~~~~~~~~
@@ -13,37 +13,37 @@ device. The following device classes have been identified:
 Each device class defines a set of semantics and a programming interface
 that devices of that class adhere to. Device drivers are the
 implementation of that programming interface for a particular device on
-a particular bus. 
+a particular bus.
 
 Device classes are agnostic with respect to what bus a device resides
-on. 
+on.
 
 
 Programming Interface
 ~~~~~~~~~~~~~~~~~~~~~
-The device class structure looks like: 
+The device class structure looks like::
 
 
-typedef int (*devclass_add)(struct device *);
-typedef void (*devclass_remove)(struct device *);
+  typedef int (*devclass_add)(struct device *);
+  typedef void (*devclass_remove)(struct device *);
 
 See the kerneldoc for the struct class.
 
-A typical device class definition would look like: 
+A typical device class definition would look like::
 
-struct device_class input_devclass = {
+  struct device_class input_devclass = {
         .name		= "input",
         .add_device	= input_add_device,
 	.remove_device	= input_remove_device,
-};
+  };
 
 Each device class structure should be exported in a header file so it
 can be used by drivers, extensions and interfaces.
 
-Device classes are registered and unregistered with the core using: 
+Device classes are registered and unregistered with the core using::
 
-int devclass_register(struct device_class * cls);
-void devclass_unregister(struct device_class * cls);
+  int devclass_register(struct device_class * cls);
+  void devclass_unregister(struct device_class * cls);
 
 
 Devices
@@ -52,16 +52,16 @@ As devices are bound to drivers, they are added to the device class
 that the driver belongs to. Before the driver model core, this would
 typically happen during the driver's probe() callback, once the device
 has been initialized. It now happens after the probe() callback
-finishes from the core. 
+finishes from the core.
 
 The device is enumerated in the class. Each time a device is added to
 the class, the class's devnum field is incremented and assigned to the
 device. The field is never decremented, so if the device is removed
 from the class and re-added, it will receive a different enumerated
-value. 
+value.
 
 The class is allowed to create a class-specific structure for the
-device and store it in the device's class_data pointer. 
+device and store it in the device's class_data pointer.
 
 There is no list of devices in the device class. Each driver has a
 list of devices that it supports. The device class has a list of
@@ -73,15 +73,15 @@ Device Drivers
 ~~~~~~~~~~~~~~
 Device drivers are added to device classes when they are registered
 with the core. A driver specifies the class it belongs to by setting
-the struct device_driver::devclass field. 
+the struct device_driver::devclass field.
 
 
 sysfs directory structure
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-There is a top-level sysfs directory named 'class'. 
+There is a top-level sysfs directory named 'class'.
 
 Each class gets a directory in the class directory, along with two
-default subdirectories:
+default subdirectories::
 
         class/
         `-- input
@@ -89,8 +89,8 @@ default subdirectories:
             `-- drivers
 
 
-Drivers registered with the class get a symlink in the drivers/ directory 
-that points to the driver's directory (under its bus directory):
+Drivers registered with the class get a symlink in the drivers/ directory
+that points to the driver's directory (under its bus directory)::
 
    class/
    `-- input
@@ -99,8 +99,8 @@ that points to the driver's directory (under its bus directory):
            `-- usb:usb_mouse -> ../../../bus/drivers/usb_mouse/
 
 
-Each device gets a symlink in the devices/ directory that points to the 
-device's directory in the physical hierarchy:
+Each device gets a symlink in the devices/ directory that points to the
+device's directory in the physical hierarchy::
 
    class/
    `-- input
@@ -111,37 +111,39 @@ device's directory in the physical hierarchy:
 
 Exporting Attributes
 ~~~~~~~~~~~~~~~~~~~~
-struct devclass_attribute {
+
+::
+
+  struct devclass_attribute {
         struct attribute        attr;
         ssize_t (*show)(struct device_class *, char * buf, size_t count, loff_t off);
         ssize_t (*store)(struct device_class *, const char * buf, size_t count, loff_t off);
-};
+  };
 
 Class drivers can export attributes using the DEVCLASS_ATTR macro that works
-similarly to the DEVICE_ATTR macro for devices. For example, a definition 
-like this:
+similarly to the DEVICE_ATTR macro for devices. For example, a definition
+like this::
 
-static DEVCLASS_ATTR(debug,0644,show_debug,store_debug);
+  static DEVCLASS_ATTR(debug,0644,show_debug,store_debug);
 
-is equivalent to declaring:
+is equivalent to declaring::
 
-static devclass_attribute devclass_attr_debug;
+  static devclass_attribute devclass_attr_debug;
 
 The bus driver can add and remove the attribute from the class's
-sysfs directory using:
+sysfs directory using::
 
-int devclass_create_file(struct device_class *, struct devclass_attribute *);
-void devclass_remove_file(struct device_class *, struct devclass_attribute *);
+  int devclass_create_file(struct device_class *, struct devclass_attribute *);
+  void devclass_remove_file(struct device_class *, struct devclass_attribute *);
 
 In the example above, the file will be named 'debug' in placed in the
-class's directory in sysfs. 
+class's directory in sysfs.
 
 
 Interfaces
 ~~~~~~~~~~
 There may exist multiple mechanisms for accessing the same device of a
-particular class type. Device interfaces describe these mechanisms. 
+particular class type. Device interfaces describe these mechanisms.
 
 When a device is added to a device class, the core attempts to add it
 to every interface that is registered with the device class.
-
diff --git a/Documentation/driver-model/design-patterns.txt b/Documentation/driver-model/design-patterns.rst
similarity index 59%
rename from Documentation/driver-model/design-patterns.txt
rename to Documentation/driver-model/design-patterns.rst
index ba7b2df64904..41eb8f41f7dd 100644
--- a/Documentation/driver-model/design-patterns.txt
+++ b/Documentation/driver-model/design-patterns.rst
@@ -1,6 +1,6 @@
-
+=============================
 Device Driver Design Patterns
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+=============================
 
 This document describes a few common design patterns found in device drivers.
 It is likely that subsystem maintainers will ask driver developers to
@@ -19,23 +19,23 @@ that the device the driver binds to will appear in several instances. This
 means that the probe() function and all callbacks need to be reentrant.
 
 The most common way to achieve this is to use the state container design
-pattern. It usually has this form:
+pattern. It usually has this form::
 
-struct foo {
-    spinlock_t lock; /* Example member */
-    (...)
-};
+  struct foo {
+      spinlock_t lock; /* Example member */
+      (...)
+  };
 
-static int foo_probe(...)
-{
-    struct foo *foo;
+  static int foo_probe(...)
+  {
+      struct foo *foo;
 
-    foo = devm_kzalloc(dev, sizeof(*foo), GFP_KERNEL);
-    if (!foo)
-        return -ENOMEM;
-    spin_lock_init(&foo->lock);
-    (...)
-}
+      foo = devm_kzalloc(dev, sizeof(*foo), GFP_KERNEL);
+      if (!foo)
+          return -ENOMEM;
+      spin_lock_init(&foo->lock);
+      (...)
+  }
 
 This will create an instance of struct foo in memory every time probe() is
 called. This is our state container for this instance of the device driver.
@@ -43,21 +43,21 @@ Of course it is then necessary to always pass this instance of the
 state around to all functions that need access to the state and its members.
 
 For example, if the driver is registering an interrupt handler, you would
-pass around a pointer to struct foo like this:
+pass around a pointer to struct foo like this::
 
-static irqreturn_t foo_handler(int irq, void *arg)
-{
-    struct foo *foo = arg;
-    (...)
-}
+  static irqreturn_t foo_handler(int irq, void *arg)
+  {
+      struct foo *foo = arg;
+      (...)
+  }
 
-static int foo_probe(...)
-{
-    struct foo *foo;
+  static int foo_probe(...)
+  {
+      struct foo *foo;
 
-    (...)
-    ret = request_irq(irq, foo_handler, 0, "foo", foo);
-}
+      (...)
+      ret = request_irq(irq, foo_handler, 0, "foo", foo);
+  }
 
 This way you always get a pointer back to the correct instance of foo in
 your interrupt handler.
@@ -66,38 +66,38 @@ your interrupt handler.
 2. container_of()
 ~~~~~~~~~~~~~~~~~
 
-Continuing on the above example we add an offloaded work:
+Continuing on the above example we add an offloaded work::
 
-struct foo {
-    spinlock_t lock;
-    struct workqueue_struct *wq;
-    struct work_struct offload;
-    (...)
-};
+  struct foo {
+      spinlock_t lock;
+      struct workqueue_struct *wq;
+      struct work_struct offload;
+      (...)
+  };
 
-static void foo_work(struct work_struct *work)
-{
-    struct foo *foo = container_of(work, struct foo, offload);
+  static void foo_work(struct work_struct *work)
+  {
+      struct foo *foo = container_of(work, struct foo, offload);
 
-    (...)
-}
+      (...)
+  }
 
-static irqreturn_t foo_handler(int irq, void *arg)
-{
-    struct foo *foo = arg;
+  static irqreturn_t foo_handler(int irq, void *arg)
+  {
+      struct foo *foo = arg;
 
-    queue_work(foo->wq, &foo->offload);
-    (...)
-}
+      queue_work(foo->wq, &foo->offload);
+      (...)
+  }
 
-static int foo_probe(...)
-{
-    struct foo *foo;
+  static int foo_probe(...)
+  {
+      struct foo *foo;
 
-    foo->wq = create_singlethread_workqueue("foo-wq");
-    INIT_WORK(&foo->offload, foo_work);
-    (...)
-}
+      foo->wq = create_singlethread_workqueue("foo-wq");
+      INIT_WORK(&foo->offload, foo_work);
+      (...)
+  }
 
 The design pattern is the same for an hrtimer or something similar that will
 return a single argument which is a pointer to a struct member in the
diff --git a/Documentation/driver-model/device.txt b/Documentation/driver-model/device.rst
similarity index 71%
rename from Documentation/driver-model/device.txt
rename to Documentation/driver-model/device.rst
index 2403eb856187..2b868d49d349 100644
--- a/Documentation/driver-model/device.txt
+++ b/Documentation/driver-model/device.rst
@@ -1,6 +1,6 @@
-
+==========================
 The Basic Device Structure
-~~~~~~~~~~~~~~~~~~~~~~~~~~
+==========================
 
 See the kerneldoc for the struct device.
 
@@ -8,9 +8,9 @@ See the kerneldoc for the struct device.
 Programming Interface
 ~~~~~~~~~~~~~~~~~~~~~
 The bus driver that discovers the device uses this to register the
-device with the core:
+device with the core::
 
-int device_register(struct device * dev);
+  int device_register(struct device * dev);
 
 The bus should initialize the following fields:
 
@@ -20,30 +20,33 @@ The bus should initialize the following fields:
     - bus
 
 A device is removed from the core when its reference count goes to
-0. The reference count can be adjusted using:
+0. The reference count can be adjusted using::
 
-struct device * get_device(struct device * dev);
-void put_device(struct device * dev);
+  struct device * get_device(struct device * dev);
+  void put_device(struct device * dev);
 
 get_device() will return a pointer to the struct device passed to it
 if the reference is not already 0 (if it's in the process of being
 removed already).
 
-A driver can access the lock in the device structure using: 
+A driver can access the lock in the device structure using::
 
-void lock_device(struct device * dev);
-void unlock_device(struct device * dev);
+  void lock_device(struct device * dev);
+  void unlock_device(struct device * dev);
 
 
 Attributes
 ~~~~~~~~~~
-struct device_attribute {
+
+::
+
+  struct device_attribute {
 	struct attribute	attr;
 	ssize_t (*show)(struct device *dev, struct device_attribute *attr,
 			char *buf);
 	ssize_t (*store)(struct device *dev, struct device_attribute *attr,
 			 const char *buf, size_t count);
-};
+  };
 
 Attributes of devices can be exported by a device driver through sysfs.
 
@@ -54,39 +57,39 @@ As explained in Documentation/kobject.txt, device attributes must be
 created before the KOBJ_ADD uevent is generated. The only way to realize
 that is by defining an attribute group.
 
-Attributes are declared using a macro called DEVICE_ATTR:
+Attributes are declared using a macro called DEVICE_ATTR::
 
-#define DEVICE_ATTR(name,mode,show,store)
+  #define DEVICE_ATTR(name,mode,show,store)
 
-Example:
+Example:::
 
-static DEVICE_ATTR(type, 0444, show_type, NULL);
-static DEVICE_ATTR(power, 0644, show_power, store_power);
+  static DEVICE_ATTR(type, 0444, show_type, NULL);
+  static DEVICE_ATTR(power, 0644, show_power, store_power);
 
 This declares two structures of type struct device_attribute with respective
 names 'dev_attr_type' and 'dev_attr_power'. These two attributes can be
-organized as follows into a group:
+organized as follows into a group::
 
-static struct attribute *dev_attrs[] = {
+  static struct attribute *dev_attrs[] = {
 	&dev_attr_type.attr,
 	&dev_attr_power.attr,
 	NULL,
-};
+  };
 
-static struct attribute_group dev_attr_group = {
+  static struct attribute_group dev_attr_group = {
 	.attrs = dev_attrs,
-};
+  };
 
-static const struct attribute_group *dev_attr_groups[] = {
+  static const struct attribute_group *dev_attr_groups[] = {
 	&dev_attr_group,
 	NULL,
-};
+  };
 
 This array of groups can then be associated with a device by setting the
-group pointer in struct device before device_register() is invoked:
+group pointer in struct device before device_register() is invoked::
 
-      dev->groups = dev_attr_groups;
-      device_register(dev);
+        dev->groups = dev_attr_groups;
+        device_register(dev);
 
 The device_register() function will use the 'groups' pointer to create the
 device attributes and the device_unregister() function will use this pointer
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.rst
similarity index 93%
rename from Documentation/driver-model/devres.txt
rename to Documentation/driver-model/devres.rst
index 99994a461359..4f88bdd7d555 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.rst
@@ -1,3 +1,4 @@
+================================
 Devres - Managed Device Resource
 ================================
 
@@ -5,17 +6,18 @@ Tejun Heo	<teheo@suse.de>
 
 First draft	10 January 2007
 
+.. contents
 
-1. Intro			: Huh? Devres?
-2. Devres			: Devres in a nutshell
-3. Devres Group			: Group devres'es and release them together
-4. Details			: Life time rules, calling context, ...
-5. Overhead			: How much do we have to pay for this?
-6. List of managed interfaces	: Currently implemented managed interfaces
+   1. Intro			: Huh? Devres?
+   2. Devres			: Devres in a nutshell
+   3. Devres Group		: Group devres'es and release them together
+   4. Details			: Life time rules, calling context, ...
+   5. Overhead			: How much do we have to pay for this?
+   6. List of managed interfaces: Currently implemented managed interfaces
 
 
-  1. Intro
-  --------
+1. Intro
+--------
 
 devres came up while trying to convert libata to use iomap.  Each
 iomapped address should be kept and unmapped on driver detach.  For
@@ -42,8 +44,8 @@ would leak resources or even cause oops when failure occurs.  iomap
 adds more to this mix.  So do msi and msix.
 
 
-  2. Devres
-  ---------
+2. Devres
+---------
 
 devres is basically linked list of arbitrarily sized memory areas
 associated with a struct device.  Each devres entry is associated with
@@ -58,7 +60,7 @@ using dma_alloc_coherent().  The managed version is called
 dmam_alloc_coherent().  It is identical to dma_alloc_coherent() except
 for the DMA memory allocated using it is managed and will be
 automatically released on driver detach.  Implementation looks like
-the following.
+the following::
 
   struct dma_devres {
 	size_t		size;
@@ -98,7 +100,7 @@ If a driver uses dmam_alloc_coherent(), the area is guaranteed to be
 freed whether initialization fails half-way or the device gets
 detached.  If most resources are acquired using managed interface, a
 driver can have much simpler init and exit code.  Init path basically
-looks like the following.
+looks like the following::
 
   my_init_one()
   {
@@ -119,7 +121,7 @@ looks like the following.
 	return register_to_upper_layer(d);
   }
 
-And exit path,
+And exit path::
 
   my_remove_one()
   {
@@ -140,13 +142,13 @@ on you. In some cases this may mean introducing checks that were not
 necessary before moving to the managed devm_* calls.
 
 
-  3. Devres group
-  ---------------
+3. Devres group
+---------------
 
 Devres entries can be grouped using devres group.  When a group is
 released, all contained normal devres entries and properly nested
 groups are released.  One usage is to rollback series of acquired
-resources on failure.  For example,
+resources on failure.  For example::
 
   if (!devres_open_group(dev, NULL, GFP_KERNEL))
 	return -ENOMEM;
@@ -172,7 +174,7 @@ like above are usually useful in midlayer driver (e.g. libata core
 layer) where interface function shouldn't have side effect on failure.
 For LLDs, just returning error code suffices in most cases.
 
-Each group is identified by void *id.  It can either be explicitly
+Each group is identified by `void *id`.  It can either be explicitly
 specified by @id argument to devres_open_group() or automatically
 created by passing NULL as @id as in the above example.  In both
 cases, devres_open_group() returns the group's id.  The returned id
@@ -180,7 +182,7 @@ can be passed to other devres functions to select the target group.
 If NULL is given to those functions, the latest open group is
 selected.
 
-For example, you can do something like the following.
+For example, you can do something like the following::
 
   int my_midlayer_create_something()
   {
@@ -199,8 +201,8 @@ For example, you can do something like the following.
   }
 
 
-  4. Details
-  ----------
+4. Details
+----------
 
 Lifetime of a devres entry begins on devres allocation and finishes
 when it is released or destroyed (removed and freed) - no reference
@@ -220,8 +222,8 @@ All devres interface functions can be called without context if the
 right gfp mask is given.
 
 
-  5. Overhead
-  -----------
+5. Overhead
+-----------
 
 Each devres bookkeeping info is allocated together with requested data
 area.  With debug option turned off, bookkeeping info occupies 16
@@ -237,8 +239,8 @@ and 400 bytes on 32bit machine after naive conversion (we can
 certainly invest a bit more effort into libata core layer).
 
 
-  6. List of managed interfaces
-  -----------------------------
+6. List of managed interfaces
+-----------------------------
 
 CLOCK
   devm_clk_get()
diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.rst
similarity index 75%
rename from Documentation/driver-model/driver.txt
rename to Documentation/driver-model/driver.rst
index d661e6f7e6a0..11d281506a04 100644
--- a/Documentation/driver-model/driver.txt
+++ b/Documentation/driver-model/driver.rst
@@ -1,5 +1,6 @@
-
+==============
 Device Drivers
+==============
 
 See the kerneldoc for the struct device_driver.
 
@@ -26,50 +27,50 @@ Declaration
 As stated above, struct device_driver objects are statically
 allocated. Below is an example declaration of the eepro100
 driver. This declaration is hypothetical only; it relies on the driver
-being converted completely to the new model. 
+being converted completely to the new model::
 
-static struct device_driver eepro100_driver = {
-       .name		= "eepro100",
-       .bus		= &pci_bus_type,
-       
-       .probe		= eepro100_probe,
-       .remove		= eepro100_remove,
-       .suspend		= eepro100_suspend,
-       .resume		= eepro100_resume,
-};
+  static struct device_driver eepro100_driver = {
+         .name		= "eepro100",
+         .bus		= &pci_bus_type,
+
+         .probe		= eepro100_probe,
+         .remove		= eepro100_remove,
+         .suspend		= eepro100_suspend,
+         .resume		= eepro100_resume,
+  };
 
 Most drivers will not be able to be converted completely to the new
 model because the bus they belong to has a bus-specific structure with
-bus-specific fields that cannot be generalized. 
+bus-specific fields that cannot be generalized.
 
 The most common example of this are device ID structures. A driver
 typically defines an array of device IDs that it supports. The format
 of these structures and the semantics for comparing device IDs are
 completely bus-specific. Defining them as bus-specific entities would
-sacrifice type-safety, so we keep bus-specific structures around. 
+sacrifice type-safety, so we keep bus-specific structures around.
 
 Bus-specific drivers should include a generic struct device_driver in
-the definition of the bus-specific driver. Like this:
+the definition of the bus-specific driver. Like this::
 
-struct pci_driver {
-       const struct pci_device_id *id_table;
-       struct device_driver	  driver;
-};
+  struct pci_driver {
+         const struct pci_device_id *id_table;
+         struct device_driver	  driver;
+  };
 
 A definition that included bus-specific fields would look like
-(using the eepro100 driver again):
+(using the eepro100 driver again)::
 
-static struct pci_driver eepro100_driver = {
-       .id_table       = eepro100_pci_tbl,
-       .driver	       = {
+  static struct pci_driver eepro100_driver = {
+         .id_table       = eepro100_pci_tbl,
+         .driver	       = {
 		.name		= "eepro100",
 		.bus		= &pci_bus_type,
 		.probe		= eepro100_probe,
 		.remove		= eepro100_remove,
 		.suspend	= eepro100_suspend,
 		.resume		= eepro100_resume,
-       },
-};
+         },
+  };
 
 Some may find the syntax of embedded struct initialization awkward or
 even a bit ugly. So far, it's the best way we've found to do what we want...
@@ -77,12 +78,14 @@ even a bit ugly. So far, it's the best way we've found to do what we want...
 Registration
 ~~~~~~~~~~~~
 
-int driver_register(struct device_driver * drv);
+::
+
+  int driver_register(struct device_driver *drv);
 
 The driver registers the structure on startup. For drivers that have
 no bus-specific fields (i.e. don't have a bus-specific driver
 structure), they would use driver_register and pass a pointer to their
-struct device_driver object. 
+struct device_driver object.
 
 Most drivers, however, will have a bus-specific structure and will
 need to register with the bus using something like pci_driver_register.
@@ -101,7 +104,7 @@ By defining wrapper functions, the transition to the new model can be
 made easier. Drivers can ignore the generic structure altogether and
 let the bus wrapper fill in the fields. For the callbacks, the bus can
 define generic callbacks that forward the call to the bus-specific
-callbacks of the drivers. 
+callbacks of the drivers.
 
 This solution is intended to be only temporary. In order to get class
 information in the driver, the drivers must be modified anyway. Since
@@ -113,16 +116,16 @@ Access
 ~~~~~~
 
 Once the object has been registered, it may access the common fields of
-the object, like the lock and the list of devices. 
+the object, like the lock and the list of devices::
 
-int driver_for_each_dev(struct device_driver * drv, void * data, 
-		        int (*callback)(struct device * dev, void * data));
+  int driver_for_each_dev(struct device_driver *drv, void *data,
+			  int (*callback)(struct device *dev, void *data));
 
 The devices field is a list of all the devices that have been bound to
 the driver. The LDM core provides a helper function to operate on all
 the devices a driver controls. This helper locks the driver on each
 node access, and does proper reference counting on each device as it
-accesses it. 
+accesses it.
 
 
 sysfs
@@ -142,7 +145,9 @@ supports.
 Callbacks
 ~~~~~~~~~
 
-	int	(*probe)	(struct device * dev);
+::
+
+	int	(*probe)	(struct device *dev);
 
 The probe() entry is called in task context, with the bus's rwsem locked
 and the driver partially bound to the device.  Drivers commonly use
@@ -162,9 +167,9 @@ the driver to that device.
 
 A driver's probe() may return a negative errno value to indicate that
 the driver did not bind to this device, in which case it should have
-released all resources it allocated.
+released all resources it allocated::
 
-	int 	(*remove)	(struct device * dev);
+	int 	(*remove)	(struct device *dev);
 
 remove is called to unbind a driver from a device. This may be
 called if a device is physically removed from the system, if the
@@ -173,43 +178,46 @@ in other cases.
 
 It is up to the driver to determine if the device is present or
 not. It should free any resources allocated specifically for the
-device; i.e. anything in the device's driver_data field. 
+device; i.e. anything in the device's driver_data field.
 
 If the device is still present, it should quiesce the device and place
-it into a supported low-power state.
+it into a supported low-power state::
 
-	int	(*suspend)	(struct device * dev, pm_message_t state);
+	int	(*suspend)	(struct device *dev, pm_message_t state);
 
-suspend is called to put the device in a low power state.
+suspend is called to put the device in a low power state::
 
-	int	(*resume)	(struct device * dev);
+	int	(*resume)	(struct device *dev);
 
 Resume is used to bring a device back from a low power state.
 
 
 Attributes
 ~~~~~~~~~~
-struct driver_attribute {
-        struct attribute        attr;
-        ssize_t (*show)(struct device_driver *driver, char *buf);
-        ssize_t (*store)(struct device_driver *, const char * buf, size_t count);
-};
 
-Device drivers can export attributes via their sysfs directories. 
+::
+
+  struct driver_attribute {
+          struct attribute        attr;
+          ssize_t (*show)(struct device_driver *driver, char *buf);
+          ssize_t (*store)(struct device_driver *, const char *buf, size_t count);
+  };
+
+Device drivers can export attributes via their sysfs directories.
 Drivers can declare attributes using a DRIVER_ATTR_RW and DRIVER_ATTR_RO
 macro that works identically to the DEVICE_ATTR_RW and DEVICE_ATTR_RO
 macros.
 
-Example:
+Example::
 
-DRIVER_ATTR_RW(debug);
+	DRIVER_ATTR_RW(debug);
 
-This is equivalent to declaring:
+This is equivalent to declaring::
 
-struct driver_attribute driver_attr_debug;
+	struct driver_attribute driver_attr_debug;
 
 This can then be used to add and remove the attribute from the
-driver's directory using:
+driver's directory using::
 
-int driver_create_file(struct device_driver *, const struct driver_attribute *);
-void driver_remove_file(struct device_driver *, const struct driver_attribute *);
+  int driver_create_file(struct device_driver *, const struct driver_attribute *);
+  void driver_remove_file(struct device_driver *, const struct driver_attribute *);
diff --git a/Documentation/driver-model/index.rst b/Documentation/driver-model/index.rst
new file mode 100644
index 000000000000..9f85d579ce56
--- /dev/null
+++ b/Documentation/driver-model/index.rst
@@ -0,0 +1,26 @@
+:orphan:
+
+============
+Driver Model
+============
+
+.. toctree::
+   :maxdepth: 1
+
+   binding
+   bus
+   class
+   design-patterns
+   device
+   devres
+   driver
+   overview
+   platform
+   porting
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/driver-model/overview.txt b/Documentation/driver-model/overview.rst
similarity index 90%
rename from Documentation/driver-model/overview.txt
rename to Documentation/driver-model/overview.rst
index 6a8f9a8075d8..d4d1e9b40e0c 100644
--- a/Documentation/driver-model/overview.txt
+++ b/Documentation/driver-model/overview.rst
@@ -1,4 +1,6 @@
+=============================
 The Linux Kernel Device Model
+=============================
 
 Patrick Mochel	<mochel@digitalimplant.org>
 
@@ -41,14 +43,14 @@ data structure. These fields must still be accessed by the bus layers,
 and sometimes by the device-specific drivers.
 
 Other bus layers are encouraged to do what has been done for the PCI layer.
-struct pci_dev now looks like this:
+struct pci_dev now looks like this::
 
-struct pci_dev {
+  struct pci_dev {
 	...
 
 	struct device dev;     /* Generic device interface */
 	...
-};
+  };
 
 Note first that the struct device dev within the struct pci_dev is
 statically allocated. This means only one allocation on device discovery.
@@ -80,26 +82,26 @@ easy. This has been accomplished by implementing a special purpose virtual
 file system named sysfs.
 
 Almost all mainstream Linux distros mount this filesystem automatically; you
-can see some variation of the following in the output of the "mount" command:
+can see some variation of the following in the output of the "mount" command::
 
-$ mount
-...
-none on /sys type sysfs (rw,noexec,nosuid,nodev)
-...
-$
+  $ mount
+  ...
+  none on /sys type sysfs (rw,noexec,nosuid,nodev)
+  ...
+  $
 
 The auto-mounting of sysfs is typically accomplished by an entry similar to
-the following in the /etc/fstab file:
+the following in the /etc/fstab file::
 
-none     	/sys	sysfs    defaults	  	0 0
+  none     	/sys	sysfs    defaults	  	0 0
 
-or something similar in the /lib/init/fstab file on Debian-based systems:
+or something similar in the /lib/init/fstab file on Debian-based systems::
 
-none            /sys    sysfs    nodev,noexec,nosuid    0 0
+  none            /sys    sysfs    nodev,noexec,nosuid    0 0
 
-If sysfs is not automatically mounted, you can always do it manually with:
+If sysfs is not automatically mounted, you can always do it manually with::
 
-# mount -t sysfs sysfs /sys
+	# mount -t sysfs sysfs /sys
 
 Whenever a device is inserted into the tree, a directory is created for it.
 This directory may be populated at each layer of discovery - the global layer,
@@ -108,7 +110,7 @@ the bus layer, or the device layer.
 The global layer currently creates two files - 'name' and 'power'. The
 former only reports the name of the device. The latter reports the
 current power state of the device. It will also be used to set the current
-power state. 
+power state.
 
 The bus layer may also create files for the devices it finds while probing the
 bus. For example, the PCI layer currently creates 'irq' and 'resource' files
@@ -118,6 +120,5 @@ A device-specific driver may also export files in its directory to expose
 device-specific data or tunable interfaces.
 
 More information about the sysfs directory layout can be found in
-the other documents in this directory and in the file 
+the other documents in this directory and in the file
 Documentation/filesystems/sysfs.txt.
-
diff --git a/Documentation/driver-model/platform.txt b/Documentation/driver-model/platform.rst
similarity index 95%
rename from Documentation/driver-model/platform.txt
rename to Documentation/driver-model/platform.rst
index 9d9e47dfc013..334dd4071ae4 100644
--- a/Documentation/driver-model/platform.txt
+++ b/Documentation/driver-model/platform.rst
@@ -1,5 +1,7 @@
+============================
 Platform Devices and Drivers
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+============================
+
 See <linux/platform_device.h> for the driver model interface to the
 platform bus:  platform_device, and platform_driver.  This pseudo-bus
 is used to connect devices on busses with minimal infrastructure,
@@ -19,15 +21,15 @@ be connected through a segment of some other kind of bus; but its
 registers will still be directly addressable.
 
 Platform devices are given a name, used in driver binding, and a
-list of resources such as addresses and IRQs.
+list of resources such as addresses and IRQs::
 
-struct platform_device {
+  struct platform_device {
 	const char	*name;
 	u32		id;
 	struct device	dev;
 	u32		num_resources;
 	struct resource	*resource;
-};
+  };
 
 
 Platform drivers
@@ -35,9 +37,9 @@ Platform drivers
 Platform drivers follow the standard driver model convention, where
 discovery/enumeration is handled outside the drivers, and drivers
 provide probe() and remove() methods.  They support power management
-and shutdown notifications using the standard conventions.
+and shutdown notifications using the standard conventions::
 
-struct platform_driver {
+  struct platform_driver {
 	int (*probe)(struct platform_device *);
 	int (*remove)(struct platform_device *);
 	void (*shutdown)(struct platform_device *);
@@ -46,25 +48,25 @@ struct platform_driver {
 	int (*resume_early)(struct platform_device *);
 	int (*resume)(struct platform_device *);
 	struct device_driver driver;
-};
+  };
 
 Note that probe() should in general verify that the specified device hardware
 actually exists; sometimes platform setup code can't be sure.  The probing
 can use device resources, including clocks, and device platform_data.
 
-Platform drivers register themselves the normal way:
+Platform drivers register themselves the normal way::
 
 	int platform_driver_register(struct platform_driver *drv);
 
 Or, in common situations where the device is known not to be hot-pluggable,
 the probe() routine can live in an init section to reduce the driver's
-runtime memory footprint:
+runtime memory footprint::
 
 	int platform_driver_probe(struct platform_driver *drv,
 			  int (*probe)(struct platform_device *))
 
 Kernel modules can be composed of several platform drivers. The platform core
-provides helpers to register and unregister an array of drivers:
+provides helpers to register and unregister an array of drivers::
 
 	int __platform_register_drivers(struct platform_driver * const *drivers,
 				      unsigned int count, struct module *owner);
@@ -73,7 +75,7 @@ provides helpers to register and unregister an array of drivers:
 
 If one of the drivers fails to register, all drivers registered up to that
 point will be unregistered in reverse order. Note that there is a convenience
-macro that passes THIS_MODULE as owner parameter:
+macro that passes THIS_MODULE as owner parameter::
 
 	#define platform_register_drivers(drivers, count)
 
@@ -81,7 +83,7 @@ macro that passes THIS_MODULE as owner parameter:
 Device Enumeration
 ~~~~~~~~~~~~~~~~~~
 As a rule, platform specific (and often board-specific) setup code will
-register platform devices:
+register platform devices::
 
 	int platform_device_register(struct platform_device *pdev);
 
@@ -133,14 +135,14 @@ tend to already have "normal" modes, such as ones using device nodes that
 were created by PNP or by platform device setup.
 
 None the less, there are some APIs to support such legacy drivers.  Avoid
-using these calls except with such hotplug-deficient drivers.
+using these calls except with such hotplug-deficient drivers::
 
 	struct platform_device *platform_device_alloc(
 			const char *name, int id);
 
 You can use platform_device_alloc() to dynamically allocate a device, which
 you will then initialize with resources and platform_device_register().
-A better solution is usually:
+A better solution is usually::
 
 	struct platform_device *platform_device_register_simple(
 			const char *name, int id,
diff --git a/Documentation/driver-model/porting.txt b/Documentation/driver-model/porting.rst
similarity index 62%
rename from Documentation/driver-model/porting.txt
rename to Documentation/driver-model/porting.rst
index 453053f1661f..ae4bf843c1d6 100644
--- a/Documentation/driver-model/porting.txt
+++ b/Documentation/driver-model/porting.rst
@@ -1,5 +1,6 @@
-
+=======================================
 Porting Drivers to the New Driver Model
+=======================================
 
 Patrick Mochel
 
@@ -8,8 +9,8 @@ Patrick Mochel
 
 Overview
 
-Please refer to Documentation/driver-model/*.txt for definitions of
-various driver types and concepts. 
+Please refer to `Documentation/driver-model/*.rst` for definitions of
+various driver types and concepts.
 
 Most of the work of porting devices drivers to the new model happens
 at the bus driver layer. This was intentional, to minimize the
@@ -18,11 +19,11 @@ of bus drivers.
 
 In a nutshell, the driver model consists of a set of objects that can
 be embedded in larger, bus-specific objects. Fields in these generic
-objects can replace fields in the bus-specific objects. 
+objects can replace fields in the bus-specific objects.
 
 The generic objects must be registered with the driver model core. By
 doing so, they will exported via the sysfs filesystem. sysfs can be
-mounted by doing 
+mounted by doing::
 
 	# mount -t sysfs sysfs /sys
 
@@ -30,108 +31,109 @@ mounted by doing
 
 The Process
 
-Step 0: Read include/linux/device.h for object and function definitions. 
+Step 0: Read include/linux/device.h for object and function definitions.
 
-Step 1: Registering the bus driver. 
+Step 1: Registering the bus driver.
 
 
-- Define a struct bus_type for the bus driver.
+- Define a struct bus_type for the bus driver::
 
-struct bus_type pci_bus_type = {
-        .name           = "pci",
-};
+    struct bus_type pci_bus_type = {
+          .name           = "pci",
+    };
 
 
 - Register the bus type.
+
   This should be done in the initialization function for the bus type,
-  which is usually the module_init(), or equivalent, function. 
+  which is usually the module_init(), or equivalent, function::
 
-static int __init pci_driver_init(void)
-{
-        return bus_register(&pci_bus_type);
-}
+    static int __init pci_driver_init(void)
+    {
+            return bus_register(&pci_bus_type);
+    }
 
-subsys_initcall(pci_driver_init);
+    subsys_initcall(pci_driver_init);
 
 
   The bus type may be unregistered (if the bus driver may be compiled
-  as a module) by doing:
+  as a module) by doing::
 
      bus_unregister(&pci_bus_type);
 
 
-- Export the bus type for others to use. 
+- Export the bus type for others to use.
 
-  Other code may wish to reference the bus type, so declare it in a 
+  Other code may wish to reference the bus type, so declare it in a
   shared header file and export the symbol.
 
-From include/linux/pci.h:
+From include/linux/pci.h::
 
-extern struct bus_type pci_bus_type;
+  extern struct bus_type pci_bus_type;
 
 
-From file the above code appears in:
+From file the above code appears in::
 
-EXPORT_SYMBOL(pci_bus_type);
+  EXPORT_SYMBOL(pci_bus_type);
 
 
 
 - This will cause the bus to show up in /sys/bus/pci/ with two
-  subdirectories: 'devices' and 'drivers'.
+  subdirectories: 'devices' and 'drivers'::
 
-# tree -d /sys/bus/pci/
-/sys/bus/pci/
-|-- devices
-`-- drivers
+    # tree -d /sys/bus/pci/
+    /sys/bus/pci/
+    |-- devices
+    `-- drivers
 
 
 
-Step 2: Registering Devices. 
+Step 2: Registering Devices.
 
 struct device represents a single device. It mainly contains metadata
-describing the relationship the device has to other entities. 
+describing the relationship the device has to other entities.
 
 
-- Embed a struct device in the bus-specific device type. 
+- Embed a struct device in the bus-specific device type::
 
 
-struct pci_dev {
-       ...
-       struct  device  dev;            /* Generic device interface */
-       ...
-};
+    struct pci_dev {
+           ...
+           struct  device  dev;            /* Generic device interface */
+           ...
+    };
 
-  It is recommended that the generic device not be the first item in 
+  It is recommended that the generic device not be the first item in
   the struct to discourage programmers from doing mindless casts
   between the object types. Instead macros, or inline functions,
-  should be created to convert from the generic object type.
+  should be created to convert from the generic object type::
 
 
-#define to_pci_dev(n) container_of(n, struct pci_dev, dev)
+    #define to_pci_dev(n) container_of(n, struct pci_dev, dev)
 
-or 
+    or
 
-static inline struct pci_dev * to_pci_dev(struct kobject * kobj)
-{
+    static inline struct pci_dev * to_pci_dev(struct kobject * kobj)
+    {
 	return container_of(n, struct pci_dev, dev);
-}
+    }
 
-  This allows the compiler to verify type-safety of the operations 
+  This allows the compiler to verify type-safety of the operations
   that are performed (which is Good).
 
 
 - Initialize the device on registration.
 
-  When devices are discovered or registered with the bus type, the 
+  When devices are discovered or registered with the bus type, the
   bus driver should initialize the generic device. The most important
   things to initialize are the bus_id, parent, and bus fields.
 
   The bus_id is an ASCII string that contains the device's address on
   the bus. The format of this string is bus-specific. This is
-  necessary for representing devices in sysfs. 
+  necessary for representing devices in sysfs.
 
   parent is the physical parent of the device. It is important that
-  the bus driver sets this field correctly. 
+  the bus driver sets this field correctly.
 
   The driver model maintains an ordered list of devices that it uses
   for power management. This list must be in order to guarantee that
@@ -140,13 +142,13 @@ static inline struct pci_dev * to_pci_dev(struct kobject * kobj)
   devices.
 
   Also, the location of the device's sysfs directory depends on a
-  device's parent. sysfs exports a directory structure that mirrors 
+  device's parent. sysfs exports a directory structure that mirrors
   the device hierarchy. Accurately setting the parent guarantees that
   sysfs will accurately represent the hierarchy.
 
   The device's bus field is a pointer to the bus type the device
   belongs to. This should be set to the bus_type that was declared
-  and initialized before. 
+  and initialized before.
 
   Optionally, the bus driver may set the device's name and release
   fields.
@@ -155,107 +157,107 @@ static inline struct pci_dev * to_pci_dev(struct kobject * kobj)
 
      "ATI Technologies Inc Radeon QD"
 
-  The release field is a callback that the driver model core calls 
-  when the device has been removed, and all references to it have 
+  The release field is a callback that the driver model core calls
+  when the device has been removed, and all references to it have
   been released. More on this in a moment.
 
 
-- Register the device. 
+- Register the device.
 
   Once the generic device has been initialized, it can be registered
-  with the driver model core by doing:
+  with the driver model core by doing::
 
        device_register(&dev->dev);
 
-  It can later be unregistered by doing: 
+  It can later be unregistered by doing::
 
        device_unregister(&dev->dev);
 
-  This should happen on buses that support hotpluggable devices. 
+  This should happen on buses that support hotpluggable devices.
   If a bus driver unregisters a device, it should not immediately free
-  it. It should instead wait for the driver model core to call the 
-  device's release method, then free the bus-specific object. 
+  it. It should instead wait for the driver model core to call the
+  device's release method, then free the bus-specific object.
   (There may be other code that is currently referencing the device
-  structure, and it would be rude to free the device while that is 
+  structure, and it would be rude to free the device while that is
   happening).
 
 
-  When the device is registered, a directory in sysfs is created. 
-  The PCI tree in sysfs looks like: 
+  When the device is registered, a directory in sysfs is created.
+  The PCI tree in sysfs looks like::
 
-/sys/devices/pci0/
-|-- 00:00.0
-|-- 00:01.0
-|   `-- 01:00.0
-|-- 00:02.0
-|   `-- 02:1f.0
-|       `-- 03:00.0
-|-- 00:1e.0
-|   `-- 04:04.0
-|-- 00:1f.0
-|-- 00:1f.1
-|   |-- ide0
-|   |   |-- 0.0
-|   |   `-- 0.1
-|   `-- ide1
-|       `-- 1.0
-|-- 00:1f.2
-|-- 00:1f.3
-`-- 00:1f.5
+    /sys/devices/pci0/
+    |-- 00:00.0
+    |-- 00:01.0
+    |   `-- 01:00.0
+    |-- 00:02.0
+    |   `-- 02:1f.0
+    |       `-- 03:00.0
+    |-- 00:1e.0
+    |   `-- 04:04.0
+    |-- 00:1f.0
+    |-- 00:1f.1
+    |   |-- ide0
+    |   |   |-- 0.0
+    |   |   `-- 0.1
+    |   `-- ide1
+    |       `-- 1.0
+    |-- 00:1f.2
+    |-- 00:1f.3
+    `-- 00:1f.5
 
   Also, symlinks are created in the bus's 'devices' directory
-  that point to the device's directory in the physical hierarchy. 
+  that point to the device's directory in the physical hierarchy::
 
-/sys/bus/pci/devices/
-|-- 00:00.0 -> ../../../devices/pci0/00:00.0
-|-- 00:01.0 -> ../../../devices/pci0/00:01.0
-|-- 00:02.0 -> ../../../devices/pci0/00:02.0
-|-- 00:1e.0 -> ../../../devices/pci0/00:1e.0
-|-- 00:1f.0 -> ../../../devices/pci0/00:1f.0
-|-- 00:1f.1 -> ../../../devices/pci0/00:1f.1
-|-- 00:1f.2 -> ../../../devices/pci0/00:1f.2
-|-- 00:1f.3 -> ../../../devices/pci0/00:1f.3
-|-- 00:1f.5 -> ../../../devices/pci0/00:1f.5
-|-- 01:00.0 -> ../../../devices/pci0/00:01.0/01:00.0
-|-- 02:1f.0 -> ../../../devices/pci0/00:02.0/02:1f.0
-|-- 03:00.0 -> ../../../devices/pci0/00:02.0/02:1f.0/03:00.0
-`-- 04:04.0 -> ../../../devices/pci0/00:1e.0/04:04.0
+    /sys/bus/pci/devices/
+    |-- 00:00.0 -> ../../../devices/pci0/00:00.0
+    |-- 00:01.0 -> ../../../devices/pci0/00:01.0
+    |-- 00:02.0 -> ../../../devices/pci0/00:02.0
+    |-- 00:1e.0 -> ../../../devices/pci0/00:1e.0
+    |-- 00:1f.0 -> ../../../devices/pci0/00:1f.0
+    |-- 00:1f.1 -> ../../../devices/pci0/00:1f.1
+    |-- 00:1f.2 -> ../../../devices/pci0/00:1f.2
+    |-- 00:1f.3 -> ../../../devices/pci0/00:1f.3
+    |-- 00:1f.5 -> ../../../devices/pci0/00:1f.5
+    |-- 01:00.0 -> ../../../devices/pci0/00:01.0/01:00.0
+    |-- 02:1f.0 -> ../../../devices/pci0/00:02.0/02:1f.0
+    |-- 03:00.0 -> ../../../devices/pci0/00:02.0/02:1f.0/03:00.0
+    `-- 04:04.0 -> ../../../devices/pci0/00:1e.0/04:04.0
 
 
 
 Step 3: Registering Drivers.
 
 struct device_driver is a simple driver structure that contains a set
-of operations that the driver model core may call. 
+of operations that the driver model core may call.
 
 
-- Embed a struct device_driver in the bus-specific driver. 
+- Embed a struct device_driver in the bus-specific driver.
 
-  Just like with devices, do something like:
+  Just like with devices, do something like::
 
-struct pci_driver {
-       ...
-       struct device_driver    driver;
-};
+    struct pci_driver {
+           ...
+           struct device_driver    driver;
+    };
 
 
-- Initialize the generic driver structure. 
+- Initialize the generic driver structure.
 
   When the driver registers with the bus (e.g. doing pci_register_driver()),
   initialize the necessary fields of the driver: the name and bus
-  fields. 
+  fields.
 
 
 - Register the driver.
 
-  After the generic driver has been initialized, call
+  After the generic driver has been initialized, call::
 
 	driver_register(&drv->driver);
 
   to register the driver with the core.
 
   When the driver is unregistered from the bus, unregister it from the
-  core by doing:
+  core by doing::
 
         driver_unregister(&drv->driver);
 
@@ -265,15 +267,15 @@ struct pci_driver {
 
 - Sysfs representation.
 
-  Drivers are exported via sysfs in their bus's 'driver's directory. 
-  For example:
+  Drivers are exported via sysfs in their bus's 'driver's directory.
+  For example::
 
-/sys/bus/pci/drivers/
-|-- 3c59x
-|-- Ensoniq AudioPCI
-|-- agpgart-amdk7
-|-- e100
-`-- serial
+    /sys/bus/pci/drivers/
+    |-- 3c59x
+    |-- Ensoniq AudioPCI
+    |-- agpgart-amdk7
+    |-- e100
+    `-- serial
 
 
 Step 4: Define Generic Methods for Drivers.
@@ -281,30 +283,30 @@ Step 4: Define Generic Methods for Drivers.
 struct device_driver defines a set of operations that the driver model
 core calls. Most of these operations are probably similar to
 operations the bus already defines for drivers, but taking different
-parameters. 
+parameters.
 
 It would be difficult and tedious to force every driver on a bus to
 simultaneously convert their drivers to generic format. Instead, the
 bus driver should define single instances of the generic methods that
-forward call to the bus-specific drivers. For instance: 
+forward call to the bus-specific drivers. For instance::
 
 
-static int pci_device_remove(struct device * dev)
-{
-        struct pci_dev * pci_dev = to_pci_dev(dev);
-        struct pci_driver * drv = pci_dev->driver;
+  static int pci_device_remove(struct device * dev)
+  {
+          struct pci_dev * pci_dev = to_pci_dev(dev);
+          struct pci_driver * drv = pci_dev->driver;
 
-        if (drv) {
-                if (drv->remove)
-                        drv->remove(pci_dev);
-                pci_dev->driver = NULL;
-        }
-        return 0;
-}
+          if (drv) {
+                  if (drv->remove)
+                          drv->remove(pci_dev);
+                  pci_dev->driver = NULL;
+          }
+          return 0;
+  }
 
 
 The generic driver should be initialized with these methods before it
-is registered. 
+is registered::
 
         /* initialize common driver fields */
         drv->driver.name = drv->name;
@@ -320,23 +322,23 @@ is registered.
 
 Ideally, the bus should only initialize the fields if they are not
 already set. This allows the drivers to implement their own generic
-methods. 
+methods.
 
 
-Step 5: Support generic driver binding. 
+Step 5: Support generic driver binding.
 
 The model assumes that a device or driver can be dynamically
 registered with the bus at any time. When registration happens,
 devices must be bound to a driver, or drivers must be bound to all
-devices that it supports. 
+devices that it supports.
 
 A driver typically contains a list of device IDs that it supports. The
-bus driver compares these IDs to the IDs of devices registered with it. 
+bus driver compares these IDs to the IDs of devices registered with it.
 The format of the device IDs, and the semantics for comparing them are
-bus-specific, so the generic model does attempt to generalize them. 
+bus-specific, so the generic model does attempt to generalize them.
 
 Instead, a bus may supply a method in struct bus_type that does the
-comparison: 
+comparison::
 
   int (*match)(struct device * dev, struct device_driver * drv);
 
@@ -346,59 +348,59 @@ and zero otherwise. It may also return error code (for example
 not possible.
 
 When a device is registered, the bus's list of drivers is iterated
-over. bus->match() is called for each one until a match is found. 
+over. bus->match() is called for each one until a match is found.
 
 When a driver is registered, the bus's list of devices is iterated
 over. bus->match() is called for each device that is not already
-claimed by a driver. 
+claimed by a driver.
 
 When a device is successfully bound to a driver, device->driver is
 set, the device is added to a per-driver list of devices, and a
 symlink is created in the driver's sysfs directory that points to the
-device's physical directory:
+device's physical directory::
 
-/sys/bus/pci/drivers/
-|-- 3c59x
-|   `-- 00:0b.0 -> ../../../../devices/pci0/00:0b.0
-|-- Ensoniq AudioPCI
-|-- agpgart-amdk7
-|   `-- 00:00.0 -> ../../../../devices/pci0/00:00.0
-|-- e100
-|   `-- 00:0c.0 -> ../../../../devices/pci0/00:0c.0
-`-- serial
+  /sys/bus/pci/drivers/
+  |-- 3c59x
+  |   `-- 00:0b.0 -> ../../../../devices/pci0/00:0b.0
+  |-- Ensoniq AudioPCI
+  |-- agpgart-amdk7
+  |   `-- 00:00.0 -> ../../../../devices/pci0/00:00.0
+  |-- e100
+  |   `-- 00:0c.0 -> ../../../../devices/pci0/00:0c.0
+  `-- serial
 
 
 This driver binding should replace the existing driver binding
-mechanism the bus currently uses. 
+mechanism the bus currently uses.
 
 
 Step 6: Supply a hotplug callback.
 
 Whenever a device is registered with the driver model core, the
-userspace program /sbin/hotplug is called to notify userspace. 
+userspace program /sbin/hotplug is called to notify userspace.
 Users can define actions to perform when a device is inserted or
-removed. 
+removed.
 
 The driver model core passes several arguments to userspace via
 environment variables, including
 
 - ACTION: set to 'add' or 'remove'
-- DEVPATH: set to the device's physical path in sysfs. 
+- DEVPATH: set to the device's physical path in sysfs.
 
 A bus driver may also supply additional parameters for userspace to
 consume. To do this, a bus must implement the 'hotplug' method in
-struct bus_type:
+struct bus_type::
 
-     int (*hotplug) (struct device *dev, char **envp, 
+     int (*hotplug) (struct device *dev, char **envp,
                      int num_envp, char *buffer, int buffer_size);
 
-This is called immediately before /sbin/hotplug is executed. 
+This is called immediately before /sbin/hotplug is executed.
 
 
 Step 7: Cleaning up the bus driver.
 
 The generic bus, device, and driver structures provide several fields
-that can replace those defined privately to the bus driver. 
+that can replace those defined privately to the bus driver.
 
 - Device list.
 
@@ -407,36 +409,36 @@ type. This includes all devices on all instances of that bus type.
 An internal list that the bus uses may be removed, in favor of using
 this one.
 
-The core provides an iterator to access these devices. 
+The core provides an iterator to access these devices::
 
-int bus_for_each_dev(struct bus_type * bus, struct device * start, 
-                     void * data, int (*fn)(struct device *, void *));
+  int bus_for_each_dev(struct bus_type * bus, struct device * start,
+                       void * data, int (*fn)(struct device *, void *));
 
 
 - Driver list.
 
 struct bus_type also contains a list of all drivers registered with
-it. An internal list of drivers that the bus driver maintains may 
-be removed in favor of using the generic one. 
+it. An internal list of drivers that the bus driver maintains may
+be removed in favor of using the generic one.
 
-The drivers may be iterated over, like devices: 
+The drivers may be iterated over, like devices::
 
-int bus_for_each_drv(struct bus_type * bus, struct device_driver * start,
-                     void * data, int (*fn)(struct device_driver *, void *));
+  int bus_for_each_drv(struct bus_type * bus, struct device_driver * start,
+                       void * data, int (*fn)(struct device_driver *, void *));
 
 
 Please see drivers/base/bus.c for more information.
 
 
-- rwsem 
+- rwsem
 
 struct bus_type contains an rwsem that protects all core accesses to
 the device and driver lists. This can be used by the bus driver
 internally, and should be used when accessing the device or driver
-lists the bus maintains. 
+lists the bus maintains.
 
 
-- Device and driver fields. 
+- Device and driver fields.
 
 Some of the fields in struct device and struct device_driver duplicate
 fields in the bus-specific representations of these objects. Feel free
@@ -444,4 +446,3 @@ to remove the bus-specific ones and favor the generic ones. Note
 though, that this will likely mean fixing up all the drivers that
 reference the bus-specific fields (though those should all be 1-line
 changes).
-
diff --git a/Documentation/eisa.txt b/Documentation/eisa.txt
index 2806e5544e43..f388545a85a7 100644
--- a/Documentation/eisa.txt
+++ b/Documentation/eisa.txt
@@ -103,7 +103,7 @@ id_table	an array of NULL terminated EISA id strings,
 		(driver_data).
 
 driver		a generic driver, such as described in
-		Documentation/driver-model/driver.txt. Only .name,
+		Documentation/driver-model/driver.rst. Only .name,
 		.probe and .remove members are mandatory.
 =============== ====================================================
 
@@ -152,7 +152,7 @@ state    set of flags indicating the state of the device. Current
 	 flags are EISA_CONFIG_ENABLED and EISA_CONFIG_FORCED.
 res	 set of four 256 bytes I/O regions allocated to this device
 dma_mask DMA mask set from the parent device.
-dev	 generic device (see Documentation/driver-model/device.txt)
+dev	 generic device (see Documentation/driver-model/device.rst)
 ======== ============================================================
 
 You can get the 'struct eisa_device' from 'struct device' using the
diff --git a/Documentation/hwmon/submitting-patches.rst b/Documentation/hwmon/submitting-patches.rst
index f9796b9d9db6..d5b05d3e54ba 100644
--- a/Documentation/hwmon/submitting-patches.rst
+++ b/Documentation/hwmon/submitting-patches.rst
@@ -89,7 +89,7 @@ increase the chances of your change being accepted.
   console. Excessive logging can seriously affect system performance.
 
 * Use devres functions whenever possible to allocate resources. For rationale
-  and supported functions, please see Documentation/driver-model/devres.txt.
+  and supported functions, please see Documentation/driver-model/devres.rst.
   If a function is not supported by devres, consider using devm_add_action().
 
 * If the driver has a detect function, make sure it is silent. Debug messages
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index dab0a5abc391..f051d22f6e9f 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -5,7 +5,7 @@
  * Copyright (c) 2002-3 Patrick Mochel
  * Copyright (c) 2002-3 Open Source Development Labs
  *
- * Please see Documentation/driver-model/platform.txt for more
+ * Please see Documentation/driver-model/platform.rst for more
  * information.
  */
 
diff --git a/drivers/gpio/gpio-cs5535.c b/drivers/gpio/gpio-cs5535.c
index 8814c8f47e57..0cb568b3fac9 100644
--- a/drivers/gpio/gpio-cs5535.c
+++ b/drivers/gpio/gpio-cs5535.c
@@ -44,7 +44,7 @@ MODULE_PARM_DESC(mask, "GPIO channel mask.");
 
 /*
  * FIXME: convert this singleton driver to use the state container
- * design pattern, see Documentation/driver-model/design-patterns.txt
+ * design pattern, see Documentation/driver-model/design-patterns.rst
  */
 static struct cs5535_gpio_chip {
 	struct gpio_chip chip;
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index f7073e046979..9b627ce970f4 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -2220,7 +2220,7 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 	struct ice_hw *hw;
 	int err;
 
-	/* this driver uses devres, see Documentation/driver-model/devres.txt */
+	/* this driver uses devres, see Documentation/driver-model/devres.rst */
 	err = pcim_enable_device(pdev);
 	if (err)
 		return err;
diff --git a/scripts/coccinelle/free/devm_free.cocci b/scripts/coccinelle/free/devm_free.cocci
index b2a2cf8bf81f..e32236a979a8 100644
--- a/scripts/coccinelle/free/devm_free.cocci
+++ b/scripts/coccinelle/free/devm_free.cocci
@@ -2,7 +2,7 @@
 /// functions.  Values allocated using the devm_functions are freed when
 /// the device is detached, and thus the use of the standard freeing
 /// function would cause a double free.
-/// See Documentation/driver-model/devres.txt for more information.
+/// See Documentation/driver-model/devres.rst for more information.
 ///
 /// A difficulty of detecting this problem is that the standard freeing
 /// function might be called from a different function than the one
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 50/79] docs: memory-devices: convert ti-emif.txt to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (46 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 48/79] docs: driver-model: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 51/79] docs: xen-tpmfront.txt: convert it to .rst Mauro Carvalho Chehab
                     ` (29 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet

Prepare this file to be moved to a kernel book by converting
it to ReST format and renaming it to ti-emif.rst.

While this is not part of any book, mark it as :orphan:, in order
to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../{ti-emif.txt => ti-emif.rst}              | 27 ++++++++++++-------
 1 file changed, 17 insertions(+), 10 deletions(-)
 rename Documentation/memory-devices/{ti-emif.txt => ti-emif.rst} (81%)

diff --git a/Documentation/memory-devices/ti-emif.txt b/Documentation/memory-devices/ti-emif.rst
similarity index 81%
rename from Documentation/memory-devices/ti-emif.txt
rename to Documentation/memory-devices/ti-emif.rst
index f4ad9a7d0f4b..c9242294e63c 100644
--- a/Documentation/memory-devices/ti-emif.txt
+++ b/Documentation/memory-devices/ti-emif.rst
@@ -1,20 +1,24 @@
-TI EMIF SDRAM Controller Driver:
+:orphan:
+
+===============================
+TI EMIF SDRAM Controller Driver
+===============================
 
 Author
-========
+======
 Aneesh V <aneesh@ti.com>
 
 Location
-============
+========
 driver/memory/emif.c
 
 Supported SoCs:
-===================
+===============
 TI OMAP44xx
 TI OMAP54xx
 
 Menuconfig option:
-==========================
+==================
 Device Drivers
 	Memory devices
 		Texas Instruments EMIF driver
@@ -29,10 +33,11 @@ functions of the driver includes re-configuring AC timing
 parameters and other settings during frequency, voltage and
 temperature changes
 
-Platform Data (see include/linux/platform_data/emif_plat.h):
-=====================================================================
+Platform Data (see include/linux/platform_data/emif_plat.h)
+===========================================================
 DDR device details and other board dependent and SoC dependent
 information can be passed through platform data (struct emif_platform_data)
+
 - DDR device details: 'struct ddr_device_info'
 - Device AC timings: 'struct lpddr2_timings' and 'struct lpddr2_min_tck'
 - Custom configurations: customizable policy options through
@@ -40,17 +45,19 @@ information can be passed through platform data (struct emif_platform_data)
 - IP revision
 - PHY type
 
-Interface to the external world:
-================================
+Interface to the external world
+===============================
 EMIF driver registers notifiers for voltage and frequency changes
 affecting EMIF and takes appropriate actions when these are invoked.
+
 - freq_pre_notify_handling()
 - freq_post_notify_handling()
 - volt_notify_handling()
 
 Debugfs
-========
+=======
 The driver creates two debugfs entries per device.
+
 - regcache_dump : dump of register values calculated and saved for all
   frequencies used so far.
 - mr4 : last polled value of MR4 register in the LPDDR2 device. MR4
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 51/79] docs: xen-tpmfront.txt: convert it to .rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (47 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 50/79] docs: memory-devices: convert ti-emif.txt to ReST Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 52/79] docs: bus-devices: ti-gpmc.rst: convert it to ReST Mauro Carvalho Chehab
                     ` (28 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet

In order to be able to add this file to the security book,
we need first to convert it to reST.

While this is not part of any book, mark it as :orphan:, in order
to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../{xen-tpmfront.txt => xen-tpmfront.rst}    | 103 ++++++++++--------
 1 file changed, 58 insertions(+), 45 deletions(-)
 rename Documentation/security/tpm/{xen-tpmfront.txt => xen-tpmfront.rst} (66%)

diff --git a/Documentation/security/tpm/xen-tpmfront.txt b/Documentation/security/tpm/xen-tpmfront.rst
similarity index 66%
rename from Documentation/security/tpm/xen-tpmfront.txt
rename to Documentation/security/tpm/xen-tpmfront.rst
index 69346de87ff3..98a16ab87360 100644
--- a/Documentation/security/tpm/xen-tpmfront.txt
+++ b/Documentation/security/tpm/xen-tpmfront.rst
@@ -1,4 +1,8 @@
+:orphan:
+
+=============================
 Virtual TPM interface for Xen
+=============================
 
 Authors: Matthew Fioravante (JHUAPL), Daniel De Graaf (NSA)
 
@@ -6,7 +10,8 @@ This document describes the virtual Trusted Platform Module (vTPM) subsystem for
 Xen. The reader is assumed to have familiarity with building and installing Xen,
 Linux, and a basic understanding of the TPM and vTPM concepts.
 
-INTRODUCTION
+Introduction
+------------
 
 The goal of this work is to provide a TPM functionality to a virtual guest
 operating system (in Xen terms, a DomU).  This allows programs to interact with
@@ -24,81 +29,89 @@ This mini-os vTPM subsystem was built on top of the previous vTPM work done by
 IBM and Intel corporation.
 
 
-DESIGN OVERVIEW
+Design Overview
 ---------------
 
-The architecture of vTPM is described below:
+The architecture of vTPM is described below::
 
-+------------------+
-|    Linux DomU    | ...
-|       |  ^       |
-|       v  |       |
-|   xen-tpmfront   |
-+------------------+
-        |  ^
-        v  |
-+------------------+
-| mini-os/tpmback  |
-|       |  ^       |
-|       v  |       |
-|  vtpm-stubdom    | ...
-|       |  ^       |
-|       v  |       |
-| mini-os/tpmfront |
-+------------------+
-        |  ^
-        v  |
-+------------------+
-| mini-os/tpmback  |
-|       |  ^       |
-|       v  |       |
-| vtpmmgr-stubdom  |
-|       |  ^       |
-|       v  |       |
-| mini-os/tpm_tis  |
-+------------------+
-        |  ^
-        v  |
-+------------------+
-|   Hardware TPM   |
-+------------------+
+  +------------------+
+  |    Linux DomU    | ...
+  |       |  ^       |
+  |       v  |       |
+  |   xen-tpmfront   |
+  +------------------+
+          |  ^
+          v  |
+  +------------------+
+  | mini-os/tpmback  |
+  |       |  ^       |
+  |       v  |       |
+  |  vtpm-stubdom    | ...
+  |       |  ^       |
+  |       v  |       |
+  | mini-os/tpmfront |
+  +------------------+
+          |  ^
+          v  |
+  +------------------+
+  | mini-os/tpmback  |
+  |       |  ^       |
+  |       v  |       |
+  | vtpmmgr-stubdom  |
+  |       |  ^       |
+  |       v  |       |
+  | mini-os/tpm_tis  |
+  +------------------+
+          |  ^
+          v  |
+  +------------------+
+  |   Hardware TPM   |
+  +------------------+
 
- * Linux DomU: The Linux based guest that wants to use a vTPM. There may be
+* Linux DomU:
+	       The Linux based guest that wants to use a vTPM. There may be
 	       more than one of these.
 
- * xen-tpmfront.ko: Linux kernel virtual TPM frontend driver. This driver
+* xen-tpmfront.ko:
+		    Linux kernel virtual TPM frontend driver. This driver
                     provides vTPM access to a Linux-based DomU.
 
- * mini-os/tpmback: Mini-os TPM backend driver. The Linux frontend driver
+* mini-os/tpmback:
+		    Mini-os TPM backend driver. The Linux frontend driver
 		    connects to this backend driver to facilitate communications
 		    between the Linux DomU and its vTPM. This driver is also
 		    used by vtpmmgr-stubdom to communicate with vtpm-stubdom.
 
- * vtpm-stubdom: A mini-os stub domain that implements a vTPM. There is a
+* vtpm-stubdom:
+		 A mini-os stub domain that implements a vTPM. There is a
 		 one to one mapping between running vtpm-stubdom instances and
                  logical vtpms on the system. The vTPM Platform Configuration
                  Registers (PCRs) are normally all initialized to zero.
 
- * mini-os/tpmfront: Mini-os TPM frontend driver. The vTPM mini-os domain
+* mini-os/tpmfront:
+		     Mini-os TPM frontend driver. The vTPM mini-os domain
 		     vtpm-stubdom uses this driver to communicate with
 		     vtpmmgr-stubdom. This driver is also used in mini-os
 		     domains such as pv-grub that talk to the vTPM domain.
 
- * vtpmmgr-stubdom: A mini-os domain that implements the vTPM manager. There is
+* vtpmmgr-stubdom:
+		    A mini-os domain that implements the vTPM manager. There is
 		    only one vTPM manager and it should be running during the
 		    entire lifetime of the machine.  This domain regulates
 		    access to the physical TPM on the system and secures the
 		    persistent state of each vTPM.
 
- * mini-os/tpm_tis: Mini-os TPM version 1.2 TPM Interface Specification (TIS)
+* mini-os/tpm_tis:
+		    Mini-os TPM version 1.2 TPM Interface Specification (TIS)
                     driver. This driver used by vtpmmgr-stubdom to talk directly to
                     the hardware TPM. Communication is facilitated by mapping
                     hardware memory pages into vtpmmgr-stubdom.
 
- * Hardware TPM: The physical TPM that is soldered onto the motherboard.
+* Hardware TPM:
+		The physical TPM that is soldered onto the motherboard.
 
 
-INTEGRATION WITH XEN
+Integration With Xen
 --------------------
 
 Support for the vTPM driver was added in Xen using the libxl toolstack in Xen
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 52/79] docs: bus-devices: ti-gpmc.rst: convert it to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (48 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 51/79] docs: xen-tpmfront.txt: convert it to .rst Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 53/79] docs: nvmem: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
                     ` (27 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet

In order to be able to add this file to a book, it needs
first to be converted to ReST and renamed.

While this is not part of any book, mark it as :orphan:, in order
to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../bus-devices/{ti-gpmc.txt => ti-gpmc.rst}  | 159 ++++++++++++------
 1 file changed, 108 insertions(+), 51 deletions(-)
 rename Documentation/bus-devices/{ti-gpmc.txt => ti-gpmc.rst} (58%)

diff --git a/Documentation/bus-devices/ti-gpmc.txt b/Documentation/bus-devices/ti-gpmc.rst
similarity index 58%
rename from Documentation/bus-devices/ti-gpmc.txt
rename to Documentation/bus-devices/ti-gpmc.rst
index cc9ce57e0a26..87c366e418be 100644
--- a/Documentation/bus-devices/ti-gpmc.txt
+++ b/Documentation/bus-devices/ti-gpmc.rst
@@ -1,8 +1,12 @@
-GPMC (General Purpose Memory Controller):
-=========================================
+:orphan:
+
+========================================
+GPMC (General Purpose Memory Controller)
+========================================
 
 GPMC is an unified memory controller dedicated to interfacing external
 memory devices like
+
  * Asynchronous SRAM like memories and application specific integrated
    circuit devices.
  * Asynchronous, synchronous, and page mode burst NOR flash devices
@@ -48,75 +52,128 @@ most of the datasheets & hardware (to be exact none of those supported
 in mainline having custom timing routine) and by simulation.
 
 gpmc timing dependency on peripheral timings:
+
 [<gpmc_timing>: <peripheral timing1>, <peripheral timing2> ...]
 
 1. common
-cs_on: t_ceasu
-adv_on: t_avdasu, t_ceavd
+
+cs_on:
+	t_ceasu
+adv_on:
+	t_avdasu, t_ceavd
 
 2. sync common
-sync_clk: clk
-page_burst_access: t_bacc
-clk_activation: t_ces, t_avds
+
+sync_clk:
+	clk
+page_burst_access:
+	t_bacc
+clk_activation:
+	t_ces, t_avds
 
 3. read async muxed
-adv_rd_off: t_avdp_r
-oe_on: t_oeasu, t_aavdh
-access: t_iaa, t_oe, t_ce, t_aa
-rd_cycle: t_rd_cycle, t_cez_r, t_oez
+
+adv_rd_off:
+	t_avdp_r
+oe_on:
+	t_oeasu, t_aavdh
+access:
+	t_iaa, t_oe, t_ce, t_aa
+rd_cycle:
+	t_rd_cycle, t_cez_r, t_oez
 
 4. read async non-muxed
-adv_rd_off: t_avdp_r
-oe_on: t_oeasu
-access: t_iaa, t_oe, t_ce, t_aa
-rd_cycle: t_rd_cycle, t_cez_r, t_oez
+
+adv_rd_off:
+	t_avdp_r
+oe_on:
+	t_oeasu
+access:
+	t_iaa, t_oe, t_ce, t_aa
+rd_cycle:
+	t_rd_cycle, t_cez_r, t_oez
 
 5. read sync muxed
-adv_rd_off: t_avdp_r, t_avdh
-oe_on: t_oeasu, t_ach, cyc_aavdh_oe
-access: t_iaa, cyc_iaa, cyc_oe
-rd_cycle: t_cez_r, t_oez, t_ce_rdyz
+
+adv_rd_off:
+	t_avdp_r, t_avdh
+oe_on:
+	t_oeasu, t_ach, cyc_aavdh_oe
+access:
+	t_iaa, cyc_iaa, cyc_oe
+rd_cycle:
+	t_cez_r, t_oez, t_ce_rdyz
 
 6. read sync non-muxed
-adv_rd_off: t_avdp_r
-oe_on: t_oeasu
-access: t_iaa, cyc_iaa, cyc_oe
-rd_cycle: t_cez_r, t_oez, t_ce_rdyz
+
+adv_rd_off:
+	t_avdp_r
+oe_on:
+	t_oeasu
+access:
+	t_iaa, cyc_iaa, cyc_oe
+rd_cycle:
+	t_cez_r, t_oez, t_ce_rdyz
 
 7. write async muxed
-adv_wr_off: t_avdp_w
-we_on, wr_data_mux_bus: t_weasu, t_aavdh, cyc_aavhd_we
-we_off: t_wpl
-cs_wr_off: t_wph
-wr_cycle: t_cez_w, t_wr_cycle
+
+adv_wr_off:
+	t_avdp_w
+we_on, wr_data_mux_bus:
+	t_weasu, t_aavdh, cyc_aavhd_we
+we_off:
+	t_wpl
+cs_wr_off:
+	t_wph
+wr_cycle:
+	t_cez_w, t_wr_cycle
 
 8. write async non-muxed
-adv_wr_off: t_avdp_w
-we_on, wr_data_mux_bus: t_weasu
-we_off: t_wpl
-cs_wr_off: t_wph
-wr_cycle: t_cez_w, t_wr_cycle
+
+adv_wr_off:
+	t_avdp_w
+we_on, wr_data_mux_bus:
+	t_weasu
+we_off:
+	t_wpl
+cs_wr_off:
+	t_wph
+wr_cycle:
+	t_cez_w, t_wr_cycle
 
 9. write sync muxed
-adv_wr_off: t_avdp_w, t_avdh
-we_on, wr_data_mux_bus: t_weasu, t_rdyo, t_aavdh, cyc_aavhd_we
-we_off: t_wpl, cyc_wpl
-cs_wr_off: t_wph
-wr_cycle: t_cez_w, t_ce_rdyz
+
+adv_wr_off:
+	t_avdp_w, t_avdh
+we_on, wr_data_mux_bus:
+	t_weasu, t_rdyo, t_aavdh, cyc_aavhd_we
+we_off:
+	t_wpl, cyc_wpl
+cs_wr_off:
+	t_wph
+wr_cycle:
+	t_cez_w, t_ce_rdyz
 
 10. write sync non-muxed
-adv_wr_off: t_avdp_w
-we_on, wr_data_mux_bus: t_weasu, t_rdyo
-we_off: t_wpl, cyc_wpl
-cs_wr_off: t_wph
-wr_cycle: t_cez_w, t_ce_rdyz
 
+adv_wr_off:
+	t_avdp_w
+we_on, wr_data_mux_bus:
+	t_weasu, t_rdyo
+we_off:
+	t_wpl, cyc_wpl
+cs_wr_off:
+	t_wph
+wr_cycle:
+	t_cez_w, t_ce_rdyz
 
-Note: Many of gpmc timings are dependent on other gpmc timings (a few
-gpmc timings purely dependent on other gpmc timings, a reason that
-some of the gpmc timings are missing above), and it will result in
-indirect dependency of peripheral timings to gpmc timings other than
-mentioned above, refer timing routine for more details. To know what
-these peripheral timings correspond to, please see explanations in
-struct gpmc_device_timings definition. And for gpmc timings refer
-IP details (link above).
+
+Note:
+  Many of gpmc timings are dependent on other gpmc timings (a few
+  gpmc timings purely dependent on other gpmc timings, a reason that
+  some of the gpmc timings are missing above), and it will result in
+  indirect dependency of peripheral timings to gpmc timings other than
+  mentioned above, refer timing routine for more details. To know what
+  these peripheral timings correspond to, please see explanations in
+  struct gpmc_device_timings definition. And for gpmc timings refer
+  IP details (link above).
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 53/79] docs: nvmem: convert docs to ReST and rename to *.rst
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (49 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 52/79] docs: bus-devices: ti-gpmc.rst: convert it to ReST Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 54/79] docs: phy: convert samsung-usb2.txt to ReST format Mauro Carvalho Chehab
                     ` (26 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet

In order to be able to add it into a doc book, we need first
convert it to ReST.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - mark literal blocks;
  - adjust title markups.

While this is not part of any book, mark it as :orphan:, in order
to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/nvmem/{nvmem.txt => nvmem.rst} | 112 ++++++++++---------
 1 file changed, 59 insertions(+), 53 deletions(-)
 rename Documentation/nvmem/{nvmem.txt => nvmem.rst} (62%)

diff --git a/Documentation/nvmem/nvmem.txt b/Documentation/nvmem/nvmem.rst
similarity index 62%
rename from Documentation/nvmem/nvmem.txt
rename to Documentation/nvmem/nvmem.rst
index fc2fe4b18655..3866b6e066d5 100644
--- a/Documentation/nvmem/nvmem.txt
+++ b/Documentation/nvmem/nvmem.rst
@@ -1,5 +1,10 @@
-			    NVMEM SUBSYSTEM
-	  Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+:orphan:
+
+===============
+NVMEM Subsystem
+===============
+
+ Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
 
 This document explains the NVMEM Framework along with the APIs provided,
 and how to use it.
@@ -40,54 +45,54 @@ nvmem_device pointer.
 
 nvmem_unregister(nvmem) is used to unregister a previously registered provider.
 
-For example, a simple qfprom case:
+For example, a simple qfprom case::
 
-static struct nvmem_config econfig = {
+  static struct nvmem_config econfig = {
 	.name = "qfprom",
 	.owner = THIS_MODULE,
-};
+  };
 
-static int qfprom_probe(struct platform_device *pdev)
-{
+  static int qfprom_probe(struct platform_device *pdev)
+  {
 	...
 	econfig.dev = &pdev->dev;
 	nvmem = nvmem_register(&econfig);
 	...
-}
+  }
 
 It is mandatory that the NVMEM provider has a regmap associated with its
 struct device. Failure to do would return error code from nvmem_register().
 
 Users of board files can define and register nvmem cells using the
-nvmem_cell_table struct:
+nvmem_cell_table struct::
 
-static struct nvmem_cell_info foo_nvmem_cells[] = {
+  static struct nvmem_cell_info foo_nvmem_cells[] = {
 	{
 		.name		= "macaddr",
 		.offset		= 0x7f00,
 		.bytes		= ETH_ALEN,
 	}
-};
+  };
 
-static struct nvmem_cell_table foo_nvmem_cell_table = {
+  static struct nvmem_cell_table foo_nvmem_cell_table = {
 	.nvmem_name		= "i2c-eeprom",
 	.cells			= foo_nvmem_cells,
 	.ncells			= ARRAY_SIZE(foo_nvmem_cells),
-};
+  };
 
-nvmem_add_cell_table(&foo_nvmem_cell_table);
+  nvmem_add_cell_table(&foo_nvmem_cell_table);
 
 Additionally it is possible to create nvmem cell lookup entries and register
-them with the nvmem framework from machine code as shown in the example below:
+them with the nvmem framework from machine code as shown in the example below::
 
-static struct nvmem_cell_lookup foo_nvmem_lookup = {
+  static struct nvmem_cell_lookup foo_nvmem_lookup = {
 	.nvmem_name		= "i2c-eeprom",
 	.cell_name		= "macaddr",
 	.dev_id			= "foo_mac.0",
 	.con_id			= "mac-address",
-};
+  };
 
-nvmem_add_cell_lookups(&foo_nvmem_lookup, 1);
+  nvmem_add_cell_lookups(&foo_nvmem_lookup, 1);
 
 NVMEM Consumers
 +++++++++++++++
@@ -99,43 +104,43 @@ read from and to NVMEM.
 =================================
 
 NVMEM cells are the data entries/fields in the NVMEM.
-The NVMEM framework provides 3 APIs to read/write NVMEM cells.
+The NVMEM framework provides 3 APIs to read/write NVMEM cells::
 
-struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *name);
-struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *name);
+  struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *name);
+  struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *name);
 
-void nvmem_cell_put(struct nvmem_cell *cell);
-void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell);
+  void nvmem_cell_put(struct nvmem_cell *cell);
+  void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell);
 
-void *nvmem_cell_read(struct nvmem_cell *cell, ssize_t *len);
-int nvmem_cell_write(struct nvmem_cell *cell, void *buf, ssize_t len);
+  void *nvmem_cell_read(struct nvmem_cell *cell, ssize_t *len);
+  int nvmem_cell_write(struct nvmem_cell *cell, void *buf, ssize_t len);
 
-*nvmem_cell_get() apis will get a reference to nvmem cell for a given id,
+`*nvmem_cell_get()` apis will get a reference to nvmem cell for a given id,
 and nvmem_cell_read/write() can then read or write to the cell.
-Once the usage of the cell is finished the consumer should call *nvmem_cell_put()
-to free all the allocation memory for the cell.
+Once the usage of the cell is finished the consumer should call
+`*nvmem_cell_put()` to free all the allocation memory for the cell.
 
 4. Direct NVMEM device based consumer APIs
 ==========================================
 
 In some instances it is necessary to directly read/write the NVMEM.
-To facilitate such consumers NVMEM framework provides below apis.
+To facilitate such consumers NVMEM framework provides below apis::
 
-struct nvmem_device *nvmem_device_get(struct device *dev, const char *name);
-struct nvmem_device *devm_nvmem_device_get(struct device *dev,
+  struct nvmem_device *nvmem_device_get(struct device *dev, const char *name);
+  struct nvmem_device *devm_nvmem_device_get(struct device *dev,
 					   const char *name);
-void nvmem_device_put(struct nvmem_device *nvmem);
-int nvmem_device_read(struct nvmem_device *nvmem, unsigned int offset,
+  void nvmem_device_put(struct nvmem_device *nvmem);
+  int nvmem_device_read(struct nvmem_device *nvmem, unsigned int offset,
 		      size_t bytes, void *buf);
-int nvmem_device_write(struct nvmem_device *nvmem, unsigned int offset,
+  int nvmem_device_write(struct nvmem_device *nvmem, unsigned int offset,
 		       size_t bytes, void *buf);
-int nvmem_device_cell_read(struct nvmem_device *nvmem,
+  int nvmem_device_cell_read(struct nvmem_device *nvmem,
 			   struct nvmem_cell_info *info, void *buf);
-int nvmem_device_cell_write(struct nvmem_device *nvmem,
+  int nvmem_device_cell_write(struct nvmem_device *nvmem,
 			    struct nvmem_cell_info *info, void *buf);
 
 Before the consumers can read/write NVMEM directly, it should get hold
-of nvmem_controller from one of the *nvmem_device_get() api.
+of nvmem_controller from one of the `*nvmem_device_get()` api.
 
 The difference between these apis and cell based apis is that these apis always
 take nvmem_device as parameter.
@@ -145,12 +150,12 @@ take nvmem_device as parameter.
 
 When a consumer no longer needs the NVMEM, it has to release the reference
 to the NVMEM it has obtained using the APIs mentioned in the above section.
-The NVMEM framework provides 2 APIs to release a reference to the NVMEM.
+The NVMEM framework provides 2 APIs to release a reference to the NVMEM::
 
-void nvmem_cell_put(struct nvmem_cell *cell);
-void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell);
-void nvmem_device_put(struct nvmem_device *nvmem);
-void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem);
+  void nvmem_cell_put(struct nvmem_cell *cell);
+  void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell);
+  void nvmem_device_put(struct nvmem_device *nvmem);
+  void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem);
 
 Both these APIs are used to release a reference to the NVMEM and
 devm_nvmem_cell_put and devm_nvmem_device_put destroys the devres associated
@@ -162,20 +167,21 @@ Userspace
 6. Userspace binary interface
 ==============================
 
-Userspace can read/write the raw NVMEM file located at
-/sys/bus/nvmem/devices/*/nvmem
+Userspace can read/write the raw NVMEM file located at::
 
-ex:
+	/sys/bus/nvmem/devices/*/nvmem
 
-hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
+ex::
 
-0000000 0000 0000 0000 0000 0000 0000 0000 0000
-*
-00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
-0000000 0000 0000 0000 0000 0000 0000 0000 0000
-...
-*
-0001000
+  hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
+
+  0000000 0000 0000 0000 0000 0000 0000 0000 0000
+  *
+  00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
+  0000000 0000 0000 0000 0000 0000 0000 0000 0000
+  ...
+  *
+  0001000
 
 7. DeviceTree Binding
 =====================
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 54/79] docs: phy: convert samsung-usb2.txt to ReST format
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (50 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 53/79] docs: nvmem: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 55/79] docs: rbtree.txt: fix Sphinx build warnings Mauro Carvalho Chehab
                     ` (25 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Kamil Debski, Sylwester Nawrocki

In order to merge it into a Sphinx book, we need first to
convert to ReST.

While this is not part of any book, mark it as :orphan:, in order
to avoid build warnings.


Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../{samsung-usb2.txt => samsung-usb2.rst}    | 62 ++++++++++---------
 MAINTAINERS                                   |  2 +-
 2 files changed, 34 insertions(+), 30 deletions(-)
 rename Documentation/phy/{samsung-usb2.txt => samsung-usb2.rst} (77%)

diff --git a/Documentation/phy/samsung-usb2.txt b/Documentation/phy/samsung-usb2.rst
similarity index 77%
rename from Documentation/phy/samsung-usb2.txt
rename to Documentation/phy/samsung-usb2.rst
index ed12d437189d..98b5952fcb97 100644
--- a/Documentation/phy/samsung-usb2.txt
+++ b/Documentation/phy/samsung-usb2.rst
@@ -1,9 +1,11 @@
-.------------------------------------------------------------------------------+
-|			Samsung USB 2.0 PHY adaptation layer		       |
-+-----------------------------------------------------------------------------+'
+:orphan:
 
-| 1. Description
-+----------------
+====================================
+Samsung USB 2.0 PHY adaptation layer
+====================================
+
+1. Description
+--------------
 
 The architecture of the USB 2.0 PHY module in Samsung SoCs is similar
 among many SoCs. In spite of the similarities it proved difficult to
@@ -14,8 +16,8 @@ the PHY powering up process had to be altered. This adaptation layer is
 a compromise between having separate drivers and having a single driver
 with added support for many special cases.
 
-| 2. Files description
-+----------------------
+2. Files description
+--------------------
 
 - phy-samsung-usb2.c
    This is the main file of the adaptation layer. This file contains
@@ -32,44 +34,45 @@ with added support for many special cases.
    driver. In addition it should contain extern declarations for
    structures that describe particular SoCs.
 
-| 3. Supporting SoCs
-+--------------------
+3. Supporting SoCs
+------------------
 
 To support a new SoC a new file should be added to the drivers/phy
 directory. Each SoC's configuration is stored in an instance of the
-struct samsung_usb2_phy_config.
+struct samsung_usb2_phy_config::
 
-struct samsung_usb2_phy_config {
+  struct samsung_usb2_phy_config {
 	const struct samsung_usb2_common_phy *phys;
 	int (*rate_to_clk)(unsigned long, u32 *);
 	unsigned int num_phys;
 	bool has_mode_switch;
-};
+  };
 
-The num_phys is the number of phys handled by the driver. *phys is an
+The num_phys is the number of phys handled by the driver. `*phys` is an
 array that contains the configuration for each phy. The has_mode_switch
 property is a boolean flag that determines whether the SoC has USB host
 and device on a single pair of pins. If so, a special register has to
 be modified to change the internal routing of these pins between a USB
 device or host module.
 
-For example the configuration for Exynos 4210 is following:
+For example the configuration for Exynos 4210 is following::
 
-const struct samsung_usb2_phy_config exynos4210_usb2_phy_config = {
+  const struct samsung_usb2_phy_config exynos4210_usb2_phy_config = {
 	.has_mode_switch        = 0,
 	.num_phys		= EXYNOS4210_NUM_PHYS,
 	.phys			= exynos4210_phys,
 	.rate_to_clk		= exynos4210_rate_to_clk,
-}
+  }
+
+- `int (*rate_to_clk)(unsigned long, u32 *)`
 
-- int (*rate_to_clk)(unsigned long, u32 *)
 	The rate_to_clk callback is to convert the rate of the clock
 	used as the reference clock for the PHY module to the value
 	that should be written in the hardware register.
 
-The exynos4210_phys configuration array is as follows:
+The exynos4210_phys configuration array is as follows::
 
-static const struct samsung_usb2_common_phy exynos4210_phys[] = {
+  static const struct samsung_usb2_common_phy exynos4210_phys[] = {
 	{
 		.label		= "device",
 		.id		= EXYNOS4210_DEVICE,
@@ -95,29 +98,30 @@ static const struct samsung_usb2_common_phy exynos4210_phys[] = {
 		.power_off	= exynos4210_power_off,
 	},
 	{},
-};
+  };
+
+- `int (*power_on)(struct samsung_usb2_phy_instance *);`
+  `int (*power_off)(struct samsung_usb2_phy_instance *);`
 
-- int (*power_on)(struct samsung_usb2_phy_instance *);
-- int (*power_off)(struct samsung_usb2_phy_instance *);
 	These two callbacks are used to power on and power off the phy
 	by modifying appropriate registers.
 
 Final change to the driver is adding appropriate compatible value to the
 phy-samsung-usb2.c file. In case of Exynos 4210 the following lines were
-added to the struct of_device_id samsung_usb2_phy_of_match[] array:
+added to the struct of_device_id samsung_usb2_phy_of_match[] array::
 
-#ifdef CONFIG_PHY_EXYNOS4210_USB2
+  #ifdef CONFIG_PHY_EXYNOS4210_USB2
 	{
 		.compatible = "samsung,exynos4210-usb2-phy",
 		.data = &exynos4210_usb2_phy_config,
 	},
-#endif
+  #endif
 
 To add further flexibility to the driver the Kconfig file enables to
 include support for selected SoCs in the compiled driver. The Kconfig
-entry for Exynos 4210 is following:
+entry for Exynos 4210 is following::
 
-config PHY_EXYNOS4210_USB2
+  config PHY_EXYNOS4210_USB2
 	bool "Support for Exynos 4210"
 	depends on PHY_SAMSUNG_USB2
 	depends on CPU_EXYNOS4210
@@ -128,8 +132,8 @@ config PHY_EXYNOS4210_USB2
 	  phys are available - device, host, HSCI0 and HSCI1.
 
 The newly created file that supports the new SoC has to be also added to the
-Makefile. In case of Exynos 4210 the added line is following:
+Makefile. In case of Exynos 4210 the added line is following::
 
-obj-$(CONFIG_PHY_EXYNOS4210_USB2)       += phy-exynos4210-usb2.o
+  obj-$(CONFIG_PHY_EXYNOS4210_USB2)       += phy-exynos4210-usb2.o
 
 After completing these steps the support for the new SoC should be ready.
diff --git a/MAINTAINERS b/MAINTAINERS
index 10cac0512711..9c99c5f47381 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13783,7 +13783,7 @@ M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/phy/samsung-phy.txt
-F:	Documentation/phy/samsung-usb2.txt
+F:	Documentation/phy/samsung-usb2.rst
 F:	drivers/phy/samsung/phy-exynos4210-usb2.c
 F:	drivers/phy/samsung/phy-exynos4x12-usb2.c
 F:	drivers/phy/samsung/phy-exynos5250-usb2.c
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 55/79] docs: rbtree.txt: fix Sphinx build warnings
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (51 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 54/79] docs: phy: convert samsung-usb2.txt to ReST format Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 57/79] docs: accounting: convert to ReST Mauro Carvalho Chehab
                     ` (24 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet

Ths file is already at ReST format. Yet, some recent changes
made it to produce a few warnings when building it with
Sphinx.

Those are trivially fixed by marking some literal blocks.

Fix them before adding it to the docs building system.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/rbtree.txt | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/rbtree.txt b/Documentation/rbtree.txt
index c42a21b99046..523d54b60087 100644
--- a/Documentation/rbtree.txt
+++ b/Documentation/rbtree.txt
@@ -204,21 +204,21 @@ potentially expensive tree iterations. This is done at negligible runtime
 overhead for maintanence; albeit larger memory footprint.
 
 Similar to the rb_root structure, cached rbtrees are initialized to be
-empty via:
+empty via::
 
   struct rb_root_cached mytree = RB_ROOT_CACHED;
 
 Cached rbtree is simply a regular rb_root with an extra pointer to cache the
 leftmost node. This allows rb_root_cached to exist wherever rb_root does,
 which permits augmented trees to be supported as well as only a few extra
-interfaces:
+interfaces::
 
   struct rb_node *rb_first_cached(struct rb_root_cached *tree);
   void rb_insert_color_cached(struct rb_node *, struct rb_root_cached *, bool);
   void rb_erase_cached(struct rb_node *node, struct rb_root_cached *);
 
 Both insert and erase calls have their respective counterpart of augmented
-trees:
+trees::
 
   void rb_insert_augmented_cached(struct rb_node *node, struct rb_root_cached *,
 				  bool, struct rb_augment_callbacks *);
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 57/79] docs: accounting: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (52 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 55/79] docs: rbtree.txt: fix Sphinx build warnings Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-05-06 15:46     ` Tejun Heo
  2019-04-22 13:27   ` [PATCH v2 58/79] docs: fmc: " Mauro Carvalho Chehab
                     ` (23 subsequent siblings)
  77 siblings, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Balbir Singh, Tejun Heo, Li Zefan,
	Johannes Weiner, cgroups

Rename the accounting documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../{cgroupstats.txt => cgroupstats.rst}      | 14 +++--
 ...ay-accounting.txt => delay-accounting.rst} | 61 +++++++++++--------
 Documentation/accounting/index.rst            | 14 +++++
 Documentation/accounting/{psi.txt => psi.rst} | 40 ++++++------
 ...kstats-struct.txt => taskstats-struct.rst} | 53 ++++++++++------
 .../{taskstats.txt => taskstats.rst}          | 15 +++--
 Documentation/admin-guide/cgroup-v2.rst       |  6 +-
 init/Kconfig                                  |  2 +-
 8 files changed, 126 insertions(+), 79 deletions(-)
 rename Documentation/accounting/{cgroupstats.txt => cgroupstats.rst} (77%)
 rename Documentation/accounting/{delay-accounting.txt => delay-accounting.rst} (77%)
 create mode 100644 Documentation/accounting/index.rst
 rename Documentation/accounting/{psi.txt => psi.rst} (91%)
 rename Documentation/accounting/{taskstats-struct.txt => taskstats-struct.rst} (90%)
 rename Documentation/accounting/{taskstats.txt => taskstats.rst} (95%)

diff --git a/Documentation/accounting/cgroupstats.txt b/Documentation/accounting/cgroupstats.rst
similarity index 77%
rename from Documentation/accounting/cgroupstats.txt
rename to Documentation/accounting/cgroupstats.rst
index d16a9849e60e..b9afc48f4ea2 100644
--- a/Documentation/accounting/cgroupstats.txt
+++ b/Documentation/accounting/cgroupstats.rst
@@ -1,3 +1,7 @@
+==================
+Control Groupstats
+==================
+
 Control Groupstats is inspired by the discussion at
 http://lkml.org/lkml/2007/4/11/187 and implements per cgroup statistics as
 suggested by Andrew Morton in http://lkml.org/lkml/2007/4/11/263.
@@ -19,9 +23,9 @@ about tasks blocked on I/O. If CONFIG_TASK_DELAY_ACCT is disabled, this
 information will not be available.
 
 To extract cgroup statistics a utility very similar to getdelays.c
-has been developed, the sample output of the utility is shown below
+has been developed, the sample output of the utility is shown below::
 
-~/balbir/cgroupstats # ./getdelays  -C "/sys/fs/cgroup/a"
-sleeping 1, blocked 0, running 1, stopped 0, uninterruptible 0
-~/balbir/cgroupstats # ./getdelays  -C "/sys/fs/cgroup"
-sleeping 155, blocked 0, running 1, stopped 0, uninterruptible 2
+  ~/balbir/cgroupstats # ./getdelays  -C "/sys/fs/cgroup/a"
+  sleeping 1, blocked 0, running 1, stopped 0, uninterruptible 0
+  ~/balbir/cgroupstats # ./getdelays  -C "/sys/fs/cgroup"
+  sleeping 155, blocked 0, running 1, stopped 0, uninterruptible 2
diff --git a/Documentation/accounting/delay-accounting.txt b/Documentation/accounting/delay-accounting.rst
similarity index 77%
rename from Documentation/accounting/delay-accounting.txt
rename to Documentation/accounting/delay-accounting.rst
index 042ea59b5853..7cc7f5852da0 100644
--- a/Documentation/accounting/delay-accounting.txt
+++ b/Documentation/accounting/delay-accounting.rst
@@ -1,5 +1,6 @@
+================
 Delay accounting
-----------------
+================
 
 Tasks encounter delays in execution when they wait
 for some kernel resource to become available e.g. a
@@ -39,7 +40,9 @@ in detail in a separate document in this directory. Taskstats returns a
 generic data structure to userspace corresponding to per-pid and per-tgid
 statistics. The delay accounting functionality populates specific fields of
 this structure. See
+
      include/linux/taskstats.h
+
 for a description of the fields pertaining to delay accounting.
 It will generally be in the form of counters returning the cumulative
 delay seen for cpu, sync block I/O, swapin, memory reclaim etc.
@@ -61,13 +64,16 @@ also serves as an example of using the taskstats interface.
 Usage
 -----
 
-Compile the kernel with
+Compile the kernel with::
+
 	CONFIG_TASK_DELAY_ACCT=y
 	CONFIG_TASKSTATS=y
 
 Delay accounting is enabled by default at boot up.
-To disable, add
+To disable, add::
+
    nodelayacct
+
 to the kernel boot options. The rest of the instructions
 below assume this has not been done.
 
@@ -78,40 +84,43 @@ The utility also allows a given command to be
 executed and the corresponding delays to be
 seen.
 
-General format of the getdelays command
+General format of the getdelays command::
 
-getdelays [-t tgid] [-p pid] [-c cmd...]
+	getdelays [-t tgid] [-p pid] [-c cmd...]
 
 
-Get delays, since system boot, for pid 10
-# ./getdelays -p 10
-(output similar to next case)
+Get delays, since system boot, for pid 10::
 
-Get sum of delays, since system boot, for all pids with tgid 5
-# ./getdelays -t 5
+	# ./getdelays -p 10
+	(output similar to next case)
 
+Get sum of delays, since system boot, for all pids with tgid 5::
 
-CPU	count	real total	virtual total	delay total
-	7876	92005750	100000000	24001500
-IO	count	delay total
-	0	0
-SWAP	count	delay total
-	0	0
-RECLAIM	count	delay total
-	0	0
+	# ./getdelays -t 5
 
-Get delays seen in executing a given simple command
-# ./getdelays -c ls /
 
-bin   data1  data3  data5  dev  home  media  opt   root  srv        sys  usr
-boot  data2  data4  data6  etc  lib   mnt    proc  sbin  subdomain  tmp  var
+	CPU	count	real total	virtual total	delay total
+		7876	92005750	100000000	24001500
+	IO	count	delay total
+		0	0
+	SWAP	count	delay total
+		0	0
+	RECLAIM	count	delay total
+		0	0
 
+Get delays seen in executing a given simple command::
 
-CPU	count	real total	virtual total	delay total
+  # ./getdelays -c ls /
+
+  bin   data1  data3  data5  dev  home  media  opt   root  srv        sys  usr
+  boot  data2  data4  data6  etc  lib   mnt    proc  sbin  subdomain  tmp  var
+
+
+  CPU	count	real total	virtual total	delay total
 	6	4000250		4000000		0
-IO	count	delay total
+  IO	count	delay total
 	0	0
-SWAP	count	delay total
+  SWAP	count	delay total
 	0	0
-RECLAIM	count	delay total
+  RECLAIM	count	delay total
 	0	0
diff --git a/Documentation/accounting/index.rst b/Documentation/accounting/index.rst
new file mode 100644
index 000000000000..e1f6284b5ff3
--- /dev/null
+++ b/Documentation/accounting/index.rst
@@ -0,0 +1,14 @@
+:orphan:
+
+==========
+Accounting
+==========
+
+.. toctree::
+   :maxdepth: 1
+
+   cgroupstats
+   delay-accounting
+   psi
+   taskstats
+   taskstats-struct
diff --git a/Documentation/accounting/psi.txt b/Documentation/accounting/psi.rst
similarity index 91%
rename from Documentation/accounting/psi.txt
rename to Documentation/accounting/psi.rst
index 5cbe5659e3b7..621111ce5740 100644
--- a/Documentation/accounting/psi.txt
+++ b/Documentation/accounting/psi.rst
@@ -35,14 +35,14 @@ Pressure interface
 Pressure information for each resource is exported through the
 respective file in /proc/pressure/ -- cpu, memory, and io.
 
-The format for CPU is as such:
+The format for CPU is as such::
 
-some avg10=0.00 avg60=0.00 avg300=0.00 total=0
+	some avg10=0.00 avg60=0.00 avg300=0.00 total=0
 
-and for memory and IO:
+and for memory and IO::
 
-some avg10=0.00 avg60=0.00 avg300=0.00 total=0
-full avg10=0.00 avg60=0.00 avg300=0.00 total=0
+	some avg10=0.00 avg60=0.00 avg300=0.00 total=0
+	full avg10=0.00 avg60=0.00 avg300=0.00 total=0
 
 The "some" line indicates the share of time in which at least some
 tasks are stalled on a given resource.
@@ -77,9 +77,9 @@ To register a trigger user has to open psi interface file under
 /proc/pressure/ representing the resource to be monitored and write the
 desired threshold and time window. The open file descriptor should be
 used to wait for trigger events using select(), poll() or epoll().
-The following format is used:
+The following format is used::
 
-<some|full> <stall amount in us> <time window in us>
+	<some|full> <stall amount in us> <time window in us>
 
 For example writing "some 150000 1000000" into /proc/pressure/memory
 would add 150ms threshold for partial memory stall measured within
@@ -115,18 +115,20 @@ trigger  is closed.
 Userspace monitor usage example
 ===============================
 
-#include <errno.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <poll.h>
-#include <string.h>
-#include <unistd.h>
+::
 
-/*
- * Monitor memory partial stall with 1s tracking window size
- * and 150ms threshold.
- */
-int main() {
+  #include <errno.h>
+  #include <fcntl.h>
+  #include <stdio.h>
+  #include <poll.h>
+  #include <string.h>
+  #include <unistd.h>
+
+  /*
+   * Monitor memory partial stall with 1s tracking window size
+   * and 150ms threshold.
+   */
+  int main() {
 	const char trig[] = "some 150000 1000000";
 	struct pollfd fds;
 	int n;
@@ -165,7 +167,7 @@ int main() {
 	}
 
 	return 0;
-}
+  }
 
 Cgroup2 interface
 =================
diff --git a/Documentation/accounting/taskstats-struct.txt b/Documentation/accounting/taskstats-struct.rst
similarity index 90%
rename from Documentation/accounting/taskstats-struct.txt
rename to Documentation/accounting/taskstats-struct.rst
index e7512c061c15..6392d2966abd 100644
--- a/Documentation/accounting/taskstats-struct.txt
+++ b/Documentation/accounting/taskstats-struct.rst
@@ -1,5 +1,6 @@
+====================
 The struct taskstats
---------------------
+====================
 
 This document contains an explanation of the struct taskstats fields.
 
@@ -10,16 +11,24 @@ There are three different groups of fields in the struct taskstats:
     the common fields and basic accounting fields are collected for
     delivery at do_exit() of a task.
 2) Delay accounting fields
-    These fields are placed between
-    /* Delay accounting fields start */
-    and
-    /* Delay accounting fields end */
+    These fields are placed between::
+
+	/* Delay accounting fields start */
+
+    and::
+
+	/* Delay accounting fields end */
+
     Their values are collected if CONFIG_TASK_DELAY_ACCT is set.
 3) Extended accounting fields
-    These fields are placed between
-    /* Extended accounting fields start */
-    and
-    /* Extended accounting fields end */
+    These fields are placed between::
+
+	/* Extended accounting fields start */
+
+    and::
+
+	/* Extended accounting fields end */
+
     Their values are collected if CONFIG_TASK_XACCT is set.
 
 4) Per-task and per-thread context switch count statistics
@@ -31,10 +40,12 @@ There are three different groups of fields in the struct taskstats:
 Future extension should add fields to the end of the taskstats struct, and
 should not change the relative position of each field within the struct.
 
+::
 
-struct taskstats {
+  struct taskstats {
+
+1) Common and basic accounting fields::
 
-1) Common and basic accounting fields:
 	/* The version number of this struct. This field is always set to
 	 * TAKSTATS_VERSION, which is defined in <linux/taskstats.h>.
 	 * Each time the struct is changed, the value should be incremented.
@@ -83,7 +94,8 @@ struct taskstats {
 	__u64	ac_majflt;		/* Major Page Fault Count */
 
 
-2) Delay accounting fields:
+2) Delay accounting fields::
+
 	/* Delay accounting fields start
 	 *
 	 * All values, until the comment "Delay accounting fields end" are
@@ -134,7 +146,8 @@ struct taskstats {
 	/* version 1 ends here */
 
 
-3) Extended accounting fields
+3) Extended accounting fields::
+
 	/* Extended accounting fields start */
 
 	/* Accumulated RSS usage in duration of a task, in MBytes-usecs.
@@ -164,17 +177,23 @@ struct taskstats {
 
 	/* Extended accounting fields end */
 
-4) Per-task and per-thread statistics
+4) Per-task and per-thread statistics::
+
 	__u64	nvcsw;			/* Context voluntary switch counter */
 	__u64	nivcsw;			/* Context involuntary switch counter */
 
-5) Time accounting for SMT machines
+5) Time accounting for SMT machines::
+
 	__u64	ac_utimescaled;		/* utime scaled on frequency etc */
 	__u64	ac_stimescaled;		/* stime scaled on frequency etc */
 	__u64	cpu_scaled_run_real_total; /* scaled cpu_run_real_total */
 
-6) Extended delay accounting fields for memory reclaim
+6) Extended delay accounting fields for memory reclaim::
+
 	/* Delay waiting for memory reclaim */
 	__u64	freepages_count;
 	__u64	freepages_delay_total;
-}
+
+::
+
+  }
diff --git a/Documentation/accounting/taskstats.txt b/Documentation/accounting/taskstats.rst
similarity index 95%
rename from Documentation/accounting/taskstats.txt
rename to Documentation/accounting/taskstats.rst
index ff06b738bb88..2a28b7f55c10 100644
--- a/Documentation/accounting/taskstats.txt
+++ b/Documentation/accounting/taskstats.rst
@@ -1,5 +1,6 @@
+=============================
 Per-task statistics interface
------------------------------
+=============================
 
 
 Taskstats is a netlink-based interface for sending per-task and
@@ -65,7 +66,7 @@ taskstats.h file.
 
 The data exchanged between user and kernel space is a netlink message belonging
 to the NETLINK_GENERIC family and using the netlink attributes interface.
-The messages are in the format
+The messages are in the format::
 
     +----------+- - -+-------------+-------------------+
     | nlmsghdr | Pad |  genlmsghdr | taskstats payload |
@@ -167,15 +168,13 @@ extended and the number of cpus grows large.
 To avoid losing statistics, userspace should do one or more of the following:
 
 - increase the receive buffer sizes for the netlink sockets opened by
-listeners to receive exit data.
+  listeners to receive exit data.
 
 - create more listeners and reduce the number of cpus being listened to by
-each listener. In the extreme case, there could be one listener for each cpu.
-Users may also consider setting the cpu affinity of the listener to the subset
-of cpus to which it listens, especially if they are listening to just one cpu.
+  each listener. In the extreme case, there could be one listener for each cpu.
+  Users may also consider setting the cpu affinity of the listener to the subset
+  of cpus to which it listens, especially if they are listening to just one cpu.
 
 Despite these measures, if the userspace receives ENOBUFS error messages
 indicated overflow of receive buffers, it should take measures to handle the
 loss of data.
-
-----
diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst
index 19c4e78666ff..123c87b75787 100644
--- a/Documentation/admin-guide/cgroup-v2.rst
+++ b/Documentation/admin-guide/cgroup-v2.rst
@@ -981,7 +981,7 @@ All time durations are in microseconds.
 	A read-only nested-key file which exists on non-root cgroups.
 
 	Shows pressure stall information for CPU. See
-	Documentation/accounting/psi.txt for details.
+	Documentation/accounting/psi.rst for details.
 
 
 Memory
@@ -1318,7 +1318,7 @@ PAGE_SIZE multiple when read back.
 	A read-only nested-key file which exists on non-root cgroups.
 
 	Shows pressure stall information for memory. See
-	Documentation/accounting/psi.txt for details.
+	Documentation/accounting/psi.rst for details.
 
 
 Usage Guidelines
@@ -1461,7 +1461,7 @@ IO Interface Files
 	A read-only nested-key file which exists on non-root cgroups.
 
 	Shows pressure stall information for IO. See
-	Documentation/accounting/psi.txt for details.
+	Documentation/accounting/psi.rst for details.
 
 
 Writeback
diff --git a/init/Kconfig b/init/Kconfig
index 448f8daa1204..4fb96464f0f2 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -516,7 +516,7 @@ config PSI
 	  have cpu.pressure, memory.pressure, and io.pressure files,
 	  which aggregate pressure stalls for the grouped tasks only.
 
-	  For more details see Documentation/accounting/psi.txt.
+	  For more details see Documentation/accounting/psi.rst.
 
 	  Say N if unsure.
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 58/79] docs: fmc: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (53 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 57/79] docs: accounting: convert to ReST Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 59/79] docs: hid: " Mauro Carvalho Chehab
                     ` (22 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet

Rename the FMC documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At least some of this files seemed to be using some markup
language similar to ReST, but with a different markup for
cross-references. Adjust those to use the ReST syntax.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/fmc/{API.txt => api.rst}        | 10 +--
 .../fmc/{carrier.txt => carrier.rst}          | 65 ++++++++++---------
 .../fmc/{FMC-and-SDB.txt => fmc-and-sdb.rst}  | 19 ++++--
 .../fmc/{fmc-chardev.txt => fmc-chardev.rst}  |  9 +--
 .../fmc/{fmc-fakedev.txt => fmc-fakedev.rst}  | 13 ++--
 .../fmc/{fmc-trivial.txt => fmc-trivial.rst}  | 11 ++--
 ...-write-eeprom.txt => fmc-write-eeprom.rst} | 36 +++++-----
 .../fmc/{identifiers.txt => identifiers.rst}  | 20 +++---
 Documentation/fmc/index.rst                   | 21 ++++++
 .../fmc/{mezzanine.txt => mezzanine.rst}      | 34 +++++-----
 .../fmc/{parameters.txt => parameters.rst}    | 11 ++--
 11 files changed, 147 insertions(+), 102 deletions(-)
 rename Documentation/fmc/{API.txt => api.rst} (87%)
 rename Documentation/fmc/{carrier.txt => carrier.rst} (91%)
 rename Documentation/fmc/{FMC-and-SDB.txt => fmc-and-sdb.rst} (88%)
 rename Documentation/fmc/{fmc-chardev.txt => fmc-chardev.rst} (96%)
 rename Documentation/fmc/{fmc-fakedev.txt => fmc-fakedev.rst} (85%)
 rename Documentation/fmc/{fmc-trivial.txt => fmc-trivial.rst} (69%)
 rename Documentation/fmc/{fmc-write-eeprom.txt => fmc-write-eeprom.rst} (79%)
 rename Documentation/fmc/{identifiers.txt => identifiers.rst} (93%)
 create mode 100644 Documentation/fmc/index.rst
 rename Documentation/fmc/{mezzanine.txt => mezzanine.rst} (87%)
 rename Documentation/fmc/{parameters.txt => parameters.rst} (96%)

diff --git a/Documentation/fmc/API.txt b/Documentation/fmc/api.rst
similarity index 87%
rename from Documentation/fmc/API.txt
rename to Documentation/fmc/api.rst
index 06b06b92c794..157a7343180c 100644
--- a/Documentation/fmc/API.txt
+++ b/Documentation/fmc/api.rst
@@ -2,7 +2,7 @@ Functions Exported by fmc.ko
 ****************************
 
 The FMC core exports the usual 4 functions that are needed for a bus to
-work, and a few more:
+work, and a few more::
 
         int fmc_driver_register(struct fmc_driver *drv);
         void fmc_driver_unregister(struct fmc_driver *drv);
@@ -20,9 +20,9 @@ work, and a few more:
         int fmc_reprogram(struct fmc_device *f, struct fmc_driver *d, char *gw,
                           int sdb_entry);
 
-The data structure that describe a device is detailed in *note FMC
-Device::, the one that describes a driver is detailed in *note FMC
-Driver::.  Please note that structures of type fmc_device must be
+The data structure that describe a device is detailed in :ref:`fmc_device`,
+the one that describes a driver is detailed in :ref:`fmc_driver`.
+Please note that structures of type fmc_device must be
 allocated by the caller, but must not be released after unregistering.
 The fmc-bus itself takes care of releasing the structure when their use
 count reaches zero - actually, the device model does that in lieu of us.
@@ -39,7 +39,7 @@ should register as a group only mezzanines that are driven by the same
 FPGA, for the reason outlined above.
 
 Finally, the fmc_reprogram function calls the reprogram method (see
-*note The API Offered by Carriers:: and also scans the memory area for
+:ref:`fmc_api_offered_by_carriers`) and also scans the memory area for
 an SDB tree. You can pass -1 as sdb_entry to disable such scan.
 Otherwise, the function fails if no tree is found at the specified
 entry point.  The function is meant to factorize common code, and by
diff --git a/Documentation/fmc/carrier.txt b/Documentation/fmc/carrier.rst
similarity index 91%
rename from Documentation/fmc/carrier.txt
rename to Documentation/fmc/carrier.rst
index 5e4f1dd3e98b..06ba443441e1 100644
--- a/Documentation/fmc/carrier.txt
+++ b/Documentation/fmc/carrier.rst
@@ -1,5 +1,8 @@
+.. _fmc_device:
+
+==========
 FMC Device
-**********
+==========
 
 Within the Linux bus framework, the FMC device is created and
 registered by the carrier driver. For example, the PCI driver for the
@@ -25,7 +28,7 @@ change for compatible changes (like a new flag) and the major number
 will increase when an incompatible change happens (for example, a
 change in layout of some fmc data structures).  Device writers should
 just set it to the value FMC_VERSION, and be ready to get back -EINVAL
-at registration time.
+at registration time::
 
      struct fmc_device {
              unsigned long version;
@@ -123,13 +126,15 @@ As I write this, she SPEC carrier is already completely functional in
 the fmc-bus environment, and is a good reference to look at.
 
 
+.. _fmc_api_offered_by_carriers:
+
 The API Offered by Carriers
 ===========================
 
 The carrier provides a number of methods by means of the
-`fmc_operations' structure, which currently is defined like this
+`fmc_operations` structure, which currently is defined like this
 (again, it is a moving target, please refer to the header rather than
-this document):
+this document)::
 
      struct fmc_operations {
              uint32_t (*readl)(struct fmc_device *fmc, int offset);
@@ -148,8 +153,7 @@ this document):
 
 The individual methods perform the following tasks:
 
-`readl'
-`writel'
+`readl`, `writel`
      These functions access FPGA registers by whatever means the
      carrier offers. They are not expected to fail, and most of the time
      they will just make a memory access to the host bus. If the
@@ -161,20 +165,20 @@ The individual methods perform the following tasks:
      or other non-local carriers, error-management is still to be
      defined.
 
-`validate'
+`validate`
      Module parameters are used to manage different applications for
      two or more boards of the same kind. Validation is based on the
      busid module parameter, if provided, and returns the matching
-     index in the associated array. See *note Module Parameters:: in in
-     doubt. If no match is found, `-ENOENT' is returned; if the user
-     didn't pass `busid=', all devices will pass validation.  The value
+     index in the associated array. See :ref:`fmc_module_parameters` in in
+     doubt. If no match is found, `-ENOENT` is returned; if the user
+     didn't pass `busid=`, all devices will pass validation.  The value
      returned by the validate method can be used as index into other
-     parameters (for example, some drivers use the `lm32=' parameter in
-     this way). Such "generic parameters" are documented in *note
-     Module Parameters::, below. The validate method is used by
-     `fmc-trivial.ko', described in *note fmc-trivial::.
+     parameters (for example, some drivers use the `lm32=` parameter in
+     this way). Such "generic parameters" are documented in
+     :ref:`fmc_module_parameters` below. The validate method is used by
+     `fmc-trivial.ko`, described in :ref:`fmc_trivial`.
 
-`reprogram'
+`reprogram`
      The carrier enumerates FMC devices by loading a standard (or
      golden) FPGA binary that allows EEPROM access. Each driver, then,
      will need to reprogram the FPGA by calling this function.  If the
@@ -182,31 +186,28 @@ The individual methods perform the following tasks:
      binary. If the gateware name has been overridden through module
      parameters (in a carrier-specific way) the file loaded will match
      the parameters. Per-device gateware names can be specified using
-     the `gateware=' parameter, see *note Module Parameters::.  Note:
+     the `gateware=` parameter, see :ref:`fmc_module_parameters`.  Note:
      Clients should call rhe new helper, fmc_reprogram, which both
      calls this method and parse the SDB tree of the FPGA.
 
-`irq_request'
-`irq_ack'
-`irq_free'
+`irq_request`, `irq_ack`, `irq_free`
      Interrupt management is carrier-specific, so it is abstracted as
      operations. The interrupt number is listed in the device
      structure, and for the mezzanine driver the number is only
      informative.  The handler will receive the fmc pointer as dev_id;
      the flags argument is passed to the Linux request_irq function,
      but fmc-specific flags may be added in the future. You'll most
-     likely want to pass the `IRQF_SHARED' flag.
+     likely want to pass the `IRQF_SHARED` flag.
 
-`gpio_config'
+`gpio_config`
      The method allows to configure a GPIO pin in the carrier, and read
-     its current value if it is configured as input. See *note The GPIO
-     Abstraction:: for details.
+     its current value if it is configured as input. See
+     :ref:`fmc_gpio_abstraction` for details.
 
-`read_ee'
-`write_ee'
+`read_ee`, `write_ee`
      Read or write the EEPROM. The functions are expected to be only
      called before reprogramming and the carrier should refuse them
-     with `ENODEV' after reprogramming.  The offset is expected to be
+     with `ENODEV` after reprogramming.  The offset is expected to be
      within 8kB (the current size), but addresses up to 1MB are
      reserved to fit bigger I2C devices in the future. Carriers may
      offer access to other internal flash memories using these same
@@ -214,9 +215,9 @@ The individual methods perform the following tasks:
      I2C memory is seen at offset 1M and the internal SPI flash is seen
      at offset 16M.  This multiplexing of several flash memories in the
      same address space is carrier-specific and should only be used
-     by a driver that has verified the `carrier_name' field.
-
+     by a driver that has verified the `carrier_name` field.
 
+.. _fmc_gpio_abstraction:
 
 The GPIO Abstraction
 ====================
@@ -230,7 +231,7 @@ some knowledge of the carrier itself.  For this reason, the specific
 driver can request to configure carrier-specific GPIO pins, numbered
 from 0 to at most 4095.  Configuration is performed by passing a
 pointer to an array of struct fmc_gpio items, as well as the length of
-the array. This is the data structure:
+the array. This is the data structure::
 
         struct fmc_gpio {
                 char *carrier_name;
@@ -254,7 +255,7 @@ pins, and expect one such configuration to succeed - if none succeeds
 it most likely means that the current carrier is a still-unknown one.
 
 If, however, your GPIO pin has a specific known role, you can pass a
-special number in the gpio field, using one of the following macros:
+special number in the gpio field, using one of the following macros::
 
         #define FMC_GPIO_RAW(x)         (x)             /* 4096 of them */
         #define FMC_GPIO_IRQ(x)         ((x) + 0x1000)  /*  256 of them */
@@ -293,9 +294,9 @@ carriers.
 
 The return value of gpio_config is defined as follows:
 
-   * If no pin in the array can be used by the carrier, `-ENODEV'.
+   * If no pin in the array can be used by the carrier, `-ENODEV`.
 
-   * If at least one virtual GPIO number cannot be mapped, `-ENOENT'.
+   * If at least one virtual GPIO number cannot be mapped, `-ENOENT`.
 
    * On success, 0 or positive. The value returned is the number of
      high input bits (if no input is configured, the value for success
diff --git a/Documentation/fmc/FMC-and-SDB.txt b/Documentation/fmc/fmc-and-sdb.rst
similarity index 88%
rename from Documentation/fmc/FMC-and-SDB.txt
rename to Documentation/fmc/fmc-and-sdb.rst
index fa14e0b24521..e64c6104a241 100644
--- a/Documentation/fmc/FMC-and-SDB.txt
+++ b/Documentation/fmc/fmc-and-sdb.rst
@@ -1,3 +1,6 @@
+============
+Introduction
+============
 
 FMC (FPGA Mezzanine Card) is the standard we use for our I/O devices,
 in the context of White Rabbit and related hardware.
@@ -18,12 +21,12 @@ submodule.
 The most up to date version of code and documentation is always
 available from the repository you can clone from:
 
-        git://ohwr.org/fmc-projects/fmc-bus.git (read-only)
-        git@ohwr.org:fmc-projects/fmc-bus.git (read-write for developers)
+        - git://ohwr.org/fmc-projects/fmc-bus.git (read-only)
+        - git@ohwr.org:fmc-projects/fmc-bus.git (read-write for developers)
 
 Selected versions of the documentation, as well as complete tar
 archives for selected revisions are placed to the Files section of the
-project: `http://www.ohwr.org/projects/fmc-bus/files'
+project: `http://www.ohwr.org/projects/fmc-bus/files`
 
 
 What is FMC
@@ -62,13 +65,15 @@ a filesystem inside the FMC EEPROM.
 SDB is not mandatory for use of this FMC kernel bus, but if you have SDB
 this package can make good use of it.  SDB itself is developed in the
 fpga-config-space OHWR project. The link to the repository is
-`git://ohwr.org/hdl-core-lib/fpga-config-space.git' and what is used in
+`git://ohwr.org/hdl-core-lib/fpga-config-space.git` and what is used in
 this project lives in the sdbfs subdirectory in there.
 
-SDB support for FMC is described in *note FMC Identification:: and
-*note SDB Support::
+SDB support for FMC is described in :ref:`fmc_identification` and
+:ref:`fmc_sdb_support`.
 
 
+.. _fmc_sdb_support:
+
 SDB Support
 ***********
 
@@ -79,7 +84,7 @@ memory image.
 The module exports the following functions, in the special header
 <linux/fmc-sdb.h>. The linux/ prefix in the name is there because we
 plan to submit it upstream in the future, and don't want to force
-changes on our drivers if that happens.
+changes on our drivers if that happens::
 
          int fmc_scan_sdb_tree(struct fmc_device *fmc, unsigned long address);
          void fmc_show_sdb_tree(struct fmc_device *fmc);
diff --git a/Documentation/fmc/fmc-chardev.txt b/Documentation/fmc/fmc-chardev.rst
similarity index 96%
rename from Documentation/fmc/fmc-chardev.txt
rename to Documentation/fmc/fmc-chardev.rst
index d9ccb278e597..5aa77511e4d1 100644
--- a/Documentation/fmc/fmc-chardev.txt
+++ b/Documentation/fmc/fmc-chardev.rst
@@ -1,5 +1,6 @@
-fmc-chardev
-===========
+================
+Character device
+================
 
 This is a simple generic driver, that allows user access by means of a
 character device (actually, one for each mezzanine it takes hold of).
@@ -27,7 +28,7 @@ arises.
 The example below shows raw access to a SPEC card programmed with its
 golden FPGA file, that features an SDB structure at offset 256 - i.e.
 64 words.  The mezzanine's EEPROM in this case is not programmed, so the
-default name is fmc-<bus><devfn>, and there are two cards in the system:
+default name is fmc-<bus><devfn>, and there are two cards in the system::
 
   spusa.root# insmod fmc-chardev.ko
   [ 1073.339332] spec 0000:02:00.0: Driver has no ID: matches all
@@ -52,7 +53,7 @@ repeated reading data is written to stdout; repeated writes read from
 stdin and the value argument is ignored.
 
 The following examples show reading the SDB magic number and the first
-SDB record from a SPEC device programmed with its golden image:
+SDB record from a SPEC device programmed with its golden image::
 
      spusa.root# ./fmc-mem /dev/fmc-0200 100
      5344422d
diff --git a/Documentation/fmc/fmc-fakedev.txt b/Documentation/fmc/fmc-fakedev.rst
similarity index 85%
rename from Documentation/fmc/fmc-fakedev.txt
rename to Documentation/fmc/fmc-fakedev.rst
index e85b74a4ae30..e9300e839eef 100644
--- a/Documentation/fmc/fmc-fakedev.txt
+++ b/Documentation/fmc/fmc-fakedev.rst
@@ -1,7 +1,10 @@
-fmc-fakedev
-===========
+.. _fmc_fakedev:
 
-This package includes a software-only device, called fmc-fakedev, which
+=========================
+Software-only Fake Device
+=========================
+
+This package includes a software-only device, called **fmc-fakedev**, which
 is able to register up to 4 mezzanines (by default it registers one).
 Unlike the SPEC driver, which creates an FMC device for each PCI cards
 it manages, this module creates a single instance of its set of
@@ -9,14 +12,14 @@ mezzanines.
 
 It is meant as the simplest possible example of how a driver should be
 written, and it includes a fake EEPROM image (built using the tools
-described in *note FMC Identification::),, which by default is
+described in :ref:`fmc_identification` which by default is
 replicated for each fake mezzanine.
 
 You can also use this device to verify the match algorithms, by asking
 it to test your own EEPROM image. You can provide the image by means of
 the eeprom= module parameter: the new EEPROM image is loaded, as usual,
 by means of the firmware loader.  This example shows the defaults and a
-custom EEPROM image:
+custom EEPROM image::
 
      spusa.root# insmod fmc-fakedev.ko
      [   99.971247]  fake-fmc-carrier: mezzanine 0
diff --git a/Documentation/fmc/fmc-trivial.txt b/Documentation/fmc/fmc-trivial.rst
similarity index 69%
rename from Documentation/fmc/fmc-trivial.txt
rename to Documentation/fmc/fmc-trivial.rst
index d1910bc67159..c98324f955ea 100644
--- a/Documentation/fmc/fmc-trivial.txt
+++ b/Documentation/fmc/fmc-trivial.rst
@@ -1,7 +1,9 @@
-fmc-trivial
-===========
+.. _fmc_trivial:
 
-The simple module fmc-trivial is just a simple client that registers an
+FMC trivial driver
+==================
+
+The simple module **fmc-trivial** is just a simple client that registers an
 interrupt handler. I used it to verify the basic mechanism of the FMC
 bus and how interrupts worked.
 
@@ -9,8 +11,7 @@ The module implements the generic FMC parameters, so it can program a
 different gateware file in each card. The whole list of parameters it
 accepts are:
 
-`busid='
-`gateware='
+`busid=`, `gateware=`
      Generic parameters. See mezzanine.txt
 
 
diff --git a/Documentation/fmc/fmc-write-eeprom.txt b/Documentation/fmc/fmc-write-eeprom.rst
similarity index 79%
rename from Documentation/fmc/fmc-write-eeprom.txt
rename to Documentation/fmc/fmc-write-eeprom.rst
index e0a9712156aa..45311bcc804a 100644
--- a/Documentation/fmc/fmc-write-eeprom.txt
+++ b/Documentation/fmc/fmc-write-eeprom.rst
@@ -1,9 +1,12 @@
-fmc-write-eeprom
+.. _fmc_write_eeprom:
+
+================
+FMC write eeprom
 ================
 
-This module is designed to load a binary file from /lib/firmware and to
-write it to the internal EEPROM of the mezzanine card. This driver uses
-the `busid' generic parameter.
+The module **fmc-write-eeprom** is designed to load a binary file from
+/lib/firmware and to write it to the internal EEPROM of the mezzanine card.
+This driver uses the `busid` generic parameter.
 
 Overwriting the EEPROM is not something you should do daily, and it is
 expected to only happen during manufacturing. For this reason, the
@@ -11,36 +14,36 @@ module makes it unlikely for the random user to change a working EEPROM.
 
 However, since the EEPROM may include application-specific information
 other than the identification, later versions of this packages added
-write-support through sysfs. See *note Accessing the EEPROM::.
+write-support through sysfs. See :ref:`fmc_accessing_eeprom`.
 
 To avoid damaging the EEPROM content, the module takes the following
 measures:
 
-   * It accepts a `file=' argument (within /lib/firmware) and if no
+   * It accepts a `file=` argument (within /lib/firmware) and if no
      such argument is received, it doesn't write anything to EEPROM
      (i.e. there is no default file name).
 
-   * If the file name ends with `.bin' it is written verbatim starting
+   * If the file name ends with `.bin` it is written verbatim starting
      at offset 0.
 
-   * If the file name ends with `.tlv' it is interpreted as
+   * If the file name ends with `.tlv` it is interpreted as
      type-length-value (i.e., it allows writev(2)-like operation).
 
    * If the file name doesn't match any of the patterns above, it is
      ignored and no write is performed.
 
-   * Only cards listed with `busid=' are written to. If no busid is
+   * Only cards listed with `busid=` are written to. If no busid is
      specified, no programming is done (and the probe function of the
      driver will fail).
 
 
 Each TLV tuple is formatted in this way: the header is 5 bytes,
-followed by data. The first byte is `w' for write, the next two bytes
+followed by data. The first byte is `w` for write, the next two bytes
 represent the address, in little-endian byte order, and the next two
 represent the data length, in little-endian order. The length does not
 include the header (it is the actual number of bytes to be written).
 
-This is a real example: that writes 5 bytes at position 0x110:
+This is a real example: that writes 5 bytes at position 0x110::
 
         spusa.root# od -t x1 -Ax /lib/firmware/try.tlv
         000000 77 10 01 05 00 30 31 32 33 34
@@ -55,13 +58,13 @@ Rabbit environment. For this reason the TLV format is not expected to
 be used much and is not expected to be developed further.
 
 If you want to try reflashing fake EEPROM devices, you can use the
-fmc-fakedev.ko module (see *note fmc-fakedev::).  Whenever you change
+fmc-fakedev.ko module (see :ref:`fmc_fakedev`).  Whenever you change
 the image starting at offset 0, it will deregister and register again
 after two seconds.  Please note, however, that if fmc-write-eeprom is
 still loaded, the system will associate it to the new device, which
 will be reprogrammed and thus will be unloaded after two seconds.  The
 following example removes the module after it reflashed fakedev the
-first time.
+first time::
 
      spusa.root# insmod fmc-fakedev.ko
         [   72.984733]  fake-fmc: Manufacturer: fake-vendor
@@ -74,12 +77,13 @@ first time.
         [  132.895794]  fake-fmc: Manufacturer: CERN
         [  132.899872]  fake-fmc: Product name: FmcDelay1ns4cha
 
+.. _fmc_accessing_eeprom:
 
 Accessing the EEPROM
-=====================
+====================
 
 The bus creates a sysfs binary file called eeprom for each mezzanine it
-knows about:
+knows about::
 
         spusa.root# cd /sys/bus/fmc/devices; ls -l */eeprom
         -r--r--r-- 1 root root 8192 Feb 21 12:30 FmcAdc100m14b4cha-0800/eeprom
@@ -94,5 +98,5 @@ the FPGA with a custom circuit, the carrier is unable to access the
 EEPROM and returns ENOTSUPP.
 
 An alternative way to write the EEPROM is the mezzanine driver
-fmc-write-eeprom (See *note fmc-write-eeprom::), but the procedure is
+fmc-write-eeprom (See :ref:`fmc_write_eeprom`), but the procedure is
 more complex.
diff --git a/Documentation/fmc/identifiers.txt b/Documentation/fmc/identifiers.rst
similarity index 93%
rename from Documentation/fmc/identifiers.txt
rename to Documentation/fmc/identifiers.rst
index 3bb577ff0d52..01e6dde0996f 100644
--- a/Documentation/fmc/identifiers.txt
+++ b/Documentation/fmc/identifiers.rst
@@ -1,3 +1,5 @@
+.. _fmc_identification:
+
 FMC Identification
 ******************
 
@@ -19,7 +21,7 @@ package and SDB (part of the fpga-config-space package).
 
 The first sections are only interesting for manufacturers who need to
 write the EEPROM. If you are just a software developer writing an FMC
-device or driver, you may jump straight to *note SDB Support::.
+device or driver, you may jump straight to :ref:`fmc_sdb_support`.
 
 
 Building the FRU Structure
@@ -27,7 +29,7 @@ Building the FRU Structure
 
 If you want to know the internals of the FRU structure and despair, you
 can retrieve the document from
-`http://download.intel.com/design/servers/ipmi/FRU1011.pdf' .  The
+`http://download.intel.com/design/servers/ipmi/FRU1011.pdf` .  The
 standard is awful and difficult without reason, so we only support the
 minimum mandatory subset - we create a simple structure and parse it
 back at run time, but we are not able to either generate or parse more
@@ -43,13 +45,15 @@ line takes precedence)
 To make a long story short, in order to build a standard-compliant
 binary file to be burned in your EEPROM, you need the following items:
 
+	===========    ===     =====================  ============
         Environment    Opt     Official Name          Default
----------------------------------------------------------------------
+	===========    ===     =====================  ============
         FRU_VENDOR     -v      "Board Manufacturer"   fmc-example
         FRU_NAME       -n      "Board Product Name"   mezzanine
-        FRU_SERIAL     -s      `Board Serial Number"  0001
+        FRU_SERIAL     -s      "Board Serial Number"  0001
         FRU_PART       -p      "Board Part Number"    sample-part
         FRU_OUTPUT     -o      not applicable         /dev/stdout
+	===========    ===     =====================  ============
 
 The "Official Name" above is what you find in the FRU official
 documentation, chapter 11, page 7 ("Board Info Area Format").  The
@@ -63,7 +67,7 @@ soon as I find some time for that.
 
 FIXME: consumption etc for FRU are here or in PTS?
 
-The following example creates a binary image for a specific board:
+The following example creates a binary image for a specific board::
 
         ./tools/fru-generator -v CERN -n FmcAdc100m14b4cha \
                -s HCCFFIA___-CR000003 -p EDA-02063-V5-0 > eeprom.bin
@@ -71,7 +75,7 @@ The following example creates a binary image for a specific board:
 The following example shows a script that builds several binary EEPROM
 images for a series of boards, changing the serial number for each of
 them. The script uses a mix of environment variables and command line
-options, and uses the same string patterns shown above.
+options, and uses the same string patterns shown above::
 
         #!/bin/sh
 
@@ -131,7 +135,7 @@ name. The IPMI-FRU name is not mandatory, but a strongly suggested
 choice; the name filename is mandatory, because this is the preferred
 short name used by the FMC core.  For example, a name of "fdelay" may
 supplement a Product Name like "FmcDelay1ns4cha" - exactly as
-demonstrated in `tools/sdbfs'.
+demonstrated in `tools/sdbfs`.
 
 Note: SDB access to flash memory is not yet supported, so the short
 name currently in use is just the "Product Name" FRU string.
@@ -139,7 +143,7 @@ name currently in use is just the "Product Name" FRU string.
 The example in tools/sdbfs includes an extra file, that is needed by
 the fine-delay driver, and must live at a known address of 0x1800.  By
 running gensdbfs on that directory you can output your binary EEPROM
-image (here below spusa$ is the shell prompt):
+image (here below spusa$ is the shell prompt)::
 
         spusa$ ../fru-generator -v CERN -n FmcDelay1ns4cha -s proto-0 \
                       -p EDA-02267-V3 > IPMI-FRU
diff --git a/Documentation/fmc/index.rst b/Documentation/fmc/index.rst
new file mode 100644
index 000000000000..a749cb04f39e
--- /dev/null
+++ b/Documentation/fmc/index.rst
@@ -0,0 +1,21 @@
+:orphan:
+
+=========================
+FMC (FPGA Mezzanine Card)
+=========================
+
+.. toctree::
+   :maxdepth: 1
+
+   fmc-and-sdb
+   carrier
+   identifiers
+   mezzanine
+   parameters
+
+   api
+
+   fmc-fakedev
+   fmc-trivial
+   fmc-write-eeprom
+   fmc-chardev
diff --git a/Documentation/fmc/mezzanine.txt b/Documentation/fmc/mezzanine.rst
similarity index 87%
rename from Documentation/fmc/mezzanine.txt
rename to Documentation/fmc/mezzanine.rst
index 87910dbfc91e..9a37147e8f14 100644
--- a/Documentation/fmc/mezzanine.txt
+++ b/Documentation/fmc/mezzanine.rst
@@ -1,5 +1,8 @@
+.. _fmc_driver:
+
+==========
 FMC Driver
-**********
+==========
 
 An FMC driver is concerned with the specific mezzanine and associated
 gateware. As such, it is expected to be independent of the carrier
@@ -12,23 +15,23 @@ configured in the FPGA; the latter technique is used when the FPGA is
 already programmed when the device is registered to the bus core.
 
 In some special cases it is possible for a driver to directly access
-FPGA registers, by means of the `fpga_base' field of the device
+FPGA registers, by means of the `fpga_base` field of the device
 structure. This may be needed for high-bandwidth peripherals like fast
 ADC cards. If the device module registered a remote device (for example
-by means of Etherbone), the `fpga_base' pointer will be NULL.
+by means of Etherbone), the `fpga_base` pointer will be NULL.
 Therefore, drivers must be ready to deal with NULL base pointers, and
 fail gracefully.  Most driver, however, are not expected to access the
 pointer directly but run fmc_readl and fmc_writel instead, which will
 work in any case.
 
 In even more special cases, the driver may access carrier-specific
-functionality: the `carrier_name' string allows the driver to check
-which is the current carrier and make use of the `carrier_data'
+functionality: the `carrier_name` string allows the driver to check
+which is the current carrier and make use of the `carrier_data`
 pointer.  We chose to use carrier names rather than numeric identifiers
 for greater flexibility, but also to avoid a central registry within
-the `fmc.h' file - we hope other users will exploit our framework with
+the `fmc.h` file - we hope other users will exploit our framework with
 their own carriers.  An example use of carrier names is in GPIO setup
-(see *note The GPIO Abstraction::), although the name match is not
+(see :ref:`fmc_gpio_abstraction`), although the name match is not
 expected to be performed by the driver.  If you depend on specific
 carriers, please check the carrier name and fail gracefully if your
 driver finds it is running in a yet-unknown-to-it environment.
@@ -44,7 +47,7 @@ their EEPROM or on the actual FPGA cores that can be enumerated.
 Therefore, we have two tables of identifiers.
 
 Matching of FRU information depends on two names, the manufacturer (or
-vendor) and the device (see *note FMC Identification::); for
+vendor) and the device (see :ref:`fmc_identification`); for
 flexibility during production (i.e. before writing to the EEPROM) the
 bus supports a catch-all driver that specifies NULL strings. For this
 reason, the table is specified as pointer-and-length, not a a
@@ -58,7 +61,7 @@ instantiated), and for consistency the list is passed as
 pointer-and-length.  Several similar devices can be driven by the same
 driver, and thus the driver specifies and array of such arrays.
 
-The complete set of involved data structures is thus the following:
+The complete set of involved data structures is thus the following::
 
         struct fmc_fru_id { char *manufacturer; char *product_name; };
         struct fmc_sdb_one_id { uint64_t vendor; uint32_t device; };
@@ -71,13 +74,14 @@ The complete set of involved data structures is thus the following:
 
 A better reference, with full explanation, is the <linux/fmc.h> header.
 
+.. _fmc_module_parameters:
 
 Module Parameters
 =================
 
 Most of the FMC drivers need the same set of kernel parameters. This
 package includes support to implement common parameters by means of
-fields in the `fmc_driver' structure and simple macro definitions.
+fields in the `fmc_driver` structure and simple macro definitions.
 
 The parameters are carrier-specific, in that they rely on the busid
 concept, that varies among carriers. For the SPEC, the identifier is a
@@ -88,20 +92,20 @@ and some code duplication is unavoidable.
 This is the list of parameters that are common to several modules to
 see how they are actually used, please look at spec-trivial.c.
 
-`busid='
+`busid=`
      This is an array of integers, listing carrier-specific
-     identification numbers. For PIC, for example, `0x0400' represents
+     identification numbers. For PIC, for example, `0x0400` represents
      bus 4, slot 0.  If any such ID is specified, the driver will only
      accept to drive cards that appear in the list (even if the FMC ID
      matches). This is accomplished by the validate carrier method.
 
-`gateware='
+`gateware=`
      The argument is an array of strings. If no busid= is specified,
      the first string of gateware= is used for all cards; otherwise the
      identifiers and gateware names are paired one by one, in the order
      specified.
 
-`show_sdb='
+`show_sdb=`
      For modules supporting it, this parameter asks to show the SDB
      internal structure by means of kernel messages. It is disabled by
      default because those lines tend to hide more important messages,
@@ -113,7 +117,7 @@ see how they are actually used, please look at spec-trivial.c.
 For example, if you are using the trivial driver to load two different
 gateware files to two different cards, you can use the following
 parameters to load different binaries to the cards, after looking up
-the PCI identifiers. This has been tested with a SPEC carrier.
+the PCI identifiers. This has been tested with a SPEC carrier::
 
         insmod fmc-trivial.ko \
                               busid=0x0200,0x0400 \
diff --git a/Documentation/fmc/parameters.txt b/Documentation/fmc/parameters.rst
similarity index 96%
rename from Documentation/fmc/parameters.txt
rename to Documentation/fmc/parameters.rst
index 59edf088e3a4..bf4566967e9c 100644
--- a/Documentation/fmc/parameters.txt
+++ b/Documentation/fmc/parameters.rst
@@ -1,16 +1,17 @@
+===========================
 Module Parameters in fmc.ko
-***************************
+===========================
 
 The core driver receives two module parameters, meant to help debugging
 client modules. Both parameters can be modified by writing to
 /sys/module/fmc/parameters/, because they are used when client drivers
 are devices are registered, not when fmc.ko is loaded.
 
-`dump_eeprom='
+`dump_eeprom=`
      If not zero, the parameter asks the bus controller to dump the
      EEPROM of any device that is registered, using printk.
 
-`dump_sdb='
+`dump_sdb=`
      If not zero, the parameter prints the SDB tree of every FPGA it is
      loaded by fmc_reprogram(). If greater than one, it asks to dump
      the binary content of SDB records.  This currently only dumps the
@@ -19,7 +20,7 @@ are devices are registered, not when fmc.ko is loaded.
 
 EEPROM dumping avoids repeating lines, since most of the contents is
 usually empty and all bits are one or zero. This is an example of the
-output:
+output::
 
         [ 6625.850480] spec 0000:02:00.0: FPGA programming successful
         [ 6626.139949] spec 0000:02:00.0: Manufacturer: CERN
@@ -40,7 +41,7 @@ output:
 
 The dump of SDB looks like the following; the example shows the simple
 golden gateware for the SPEC card, removing the leading timestamps to
-fit the page:
+fit the page::
 
         spec 0000:02:00.0: SDB: 00000651:e6a542c9 WB4-Crossbar-GSI
         spec 0000:02:00.0: SDB: 0000ce42:ff07fc47 WR-Periph-Syscon (00000000-000000ff)
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 59/79] docs: hid: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (54 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 58/79] docs: fmc: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 60/79] docs: ia64: " Mauro Carvalho Chehab
                     ` (21 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Jiri Kosina, Jonathan Cameron,
	Srinivas Pandruvada, Benjamin Tissoires, Dmitry Torokhov,
	linux-input, linux-iio, linux-usb

Rename the HID documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

While here, fix the sysfs example from hid-sensor.txt, that
has a lot of "?" instead of the proper UTF-8 characters that
are produced by the tree command.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../hid/{hid-alps.txt => hid-alps.rst}        |  85 ++-
 .../hid/{hid-sensor.txt => hid-sensor.rst}    | 192 +++----
 .../{hid-transport.txt => hid-transport.rst}  |  82 ++-
 Documentation/hid/{hiddev.txt => hiddev.rst}  | 130 +++--
 Documentation/hid/{hidraw.txt => hidraw.rst}  |  53 +-
 Documentation/hid/index.rst                   |  18 +
 Documentation/hid/intel-ish-hid.rst           | 485 ++++++++++++++++++
 Documentation/hid/intel-ish-hid.txt           | 454 ----------------
 Documentation/hid/{uhid.txt => uhid.rst}      |  46 +-
 Documentation/input/input.rst                 |   2 +-
 MAINTAINERS                                   |   2 +-
 11 files changed, 885 insertions(+), 664 deletions(-)
 rename Documentation/hid/{hid-alps.txt => hid-alps.rst} (64%)
 rename Documentation/hid/{hid-sensor.txt => hid-sensor.rst} (61%)
 rename Documentation/hid/{hid-transport.txt => hid-transport.rst} (93%)
 rename Documentation/hid/{hiddev.txt => hiddev.rst} (80%)
 rename Documentation/hid/{hidraw.txt => hidraw.rst} (89%)
 create mode 100644 Documentation/hid/index.rst
 create mode 100644 Documentation/hid/intel-ish-hid.rst
 delete mode 100644 Documentation/hid/intel-ish-hid.txt
 rename Documentation/hid/{uhid.txt => uhid.rst} (94%)

diff --git a/Documentation/hid/hid-alps.txt b/Documentation/hid/hid-alps.rst
similarity index 64%
rename from Documentation/hid/hid-alps.txt
rename to Documentation/hid/hid-alps.rst
index 6b02a2447c77..e2f4c4c11e3f 100644
--- a/Documentation/hid/hid-alps.txt
+++ b/Documentation/hid/hid-alps.rst
@@ -1,19 +1,26 @@
+==========================
 ALPS HID Touchpad Protocol
-----------------------
+==========================
 
 Introduction
 ------------
 Currently ALPS HID driver supports U1 Touchpad device.
 
-U1 devuce basic information.
+U1 device basic information.
+
+==========	======
 Vender ID	0x044E
 Product ID	0x120B
 Version ID	0x0121
+==========	======
 
 
 HID Descriptor
-------------
+--------------
+
+=======	====================	=====	=======================================
 Byte	Field			Value	Notes
+=======	====================	=====	=======================================
 0	wHIDDescLength		001E	Length of HID Descriptor : 30 bytes
 2	bcdVersion		0100	Compliant with Version 1.00
 4	wReportDescLength	00B2	Report Descriptor is 178 Bytes (0x00B2)
@@ -28,32 +35,42 @@ Byte	Field			Value	Notes
 22	wProductID		120B	Product ID 0x120B
 24	wVersionID		0121	Version 01.21
 26	RESERVED		0000	RESERVED
+=======	====================	=====	=======================================
 
 
 Report ID
-------------
-ReportID-1	(Input Reports)	(HIDUsage-Mouse) for TP&SP
-ReportID-2	(Input Reports)	(HIDUsage-keyboard) for TP
-ReportID-3	(Input Reports)	(Vendor Usage: Max 10 finger data) for TP
-ReportID-4	(Input Reports)	(Vendor Usage: ON bit data) for GP
-ReportID-5	(Feature Reports)	Feature Reports
-ReportID-6	(Input Reports)	(Vendor Usage: StickPointer data) for SP
-ReportID-7	(Feature Reports)	Flash update (Bootloader)
+---------
+
+==========	=================  =========================================
+ReportID-1	(Input Reports)	   (HIDUsage-Mouse) for TP&SP
+ReportID-2	(Input Reports)	   (HIDUsage-keyboard) for TP
+ReportID-3	(Input Reports)	   (Vendor Usage: Max 10 finger data) for TP
+ReportID-4	(Input Reports)	   (Vendor Usage: ON bit data) for GP
+ReportID-5	(Feature Reports)  Feature Reports
+ReportID-6	(Input Reports)	   (Vendor Usage: StickPointer data) for SP
+ReportID-7	(Feature Reports)  Flash update (Bootloader)
+==========	=================  =========================================
 
 
 Data pattern
 ------------
+
+=====	==========	=====	=================
 Case1	ReportID_1	TP/SP	Relative/Relative
 Case2	ReportID_3	TP	Absolute
 	ReportID_6	SP	Absolute
+=====	==========	=====	=================
 
 
 Command Read/Write
 ------------------
 To read/write to RAM, need to send a commands to the device.
+
 The command format is as below.
 
 DataByte(SET_REPORT)
+
+=====	======================
 Byte1	Command Byte
 Byte2	Address - Byte 0 (LSB)
 Byte3	Address - Byte 1
@@ -61,13 +78,19 @@ Byte4	Address - Byte 2
 Byte5	Address - Byte 3 (MSB)
 Byte6	Value Byte
 Byte7	Checksum
+=====	======================
 
 Command Byte is read=0xD1/write=0xD2 .
+
 Address is read/write RAM address.
+
 Value Byte is writing data when you send the write commands.
+
 When you read RAM, there is no meaning.
 
 DataByte(GET_REPORT)
+
+=====	======================
 Byte1	Response Byte
 Byte2	Address - Byte 0 (LSB)
 Byte3	Address - Byte 1
@@ -75,6 +98,7 @@ Byte4	Address - Byte 2
 Byte5	Address - Byte 3 (MSB)
 Byte6	Value Byte
 Byte7	Checksum
+=====	======================
 
 Read value is stored in Value Byte.
 
@@ -82,7 +106,11 @@ Read value is stored in Value Byte.
 Packet Format
 Touchpad data byte
 ------------------
-	b7	b6	b5	b4	b3	b2	b1	b0
+
+
+======= ======= ======= ======= ======= ======= ======= ======= =====
+-	b7	b6	b5	b4	b3	b2	b1	b0
+======= ======= ======= ======= ======= ======= ======= ======= =====
 1	0	0	SW6	SW5	SW4	SW3	SW2	SW1
 2	0	0	0	Fcv	Fn3	Fn2	Fn1	Fn0
 3	Xa0_7	Xa0_6	Xa0_5	Xa0_4	Xa0_3	Xa0_2	Xa0_1	Xa0_0
@@ -114,17 +142,25 @@ Touchpad data byte
 25	Ya4_7	Ya4_6	Ya4_5	Ya4_4	Ya4_3	Ya4_2	Ya4_1	Ya4_0
 26	Ya4_15	Ya4_14	Ya4_13	Ya4_12	Ya4_11	Ya4_10	Ya4_9	Ya4_8
 27	LFB4	Zs4_6	Zs4_5	Zs4_4	Zs4_3	Zs4_2	Zs4_1	Zs4_0
+======= ======= ======= ======= ======= ======= ======= ======= =====
 
 
-SW1-SW6:	SW ON/OFF status
-Xan_15-0(16bit):X Absolute data of the "n"th finger
-Yan_15-0(16bit):Y Absolute data of the "n"th finger
-Zsn_6-0(7bit):	Operation area of the "n"th finger
+SW1-SW6:
+	SW ON/OFF status
+Xan_15-0(16bit):
+	X Absolute data of the "n"th finger
+Yan_15-0(16bit):
+	Y Absolute data of the "n"th finger
+Zsn_6-0(7bit):
+	Operation area of the "n"th finger
 
 
 StickPointer data byte
-------------------
-	b7	b6	b5	b4	b3	b2	b1	b0
+----------------------
+
+======= ======= ======= ======= ======= ======= ======= ======= =====
+-	b7	b6	b5	b4	b3	b2	b1	b0
+======= ======= ======= ======= ======= ======= ======= ======= =====
 Byte1	1	1	1	0	1	SW3	SW2	SW1
 Byte2	X7	X6	X5	X4	X3	X2	X1	X0
 Byte3	X15	X14	X13	X12	X11	X10	X9	X8
@@ -132,8 +168,13 @@ Byte4	Y7	Y6	Y5	Y4	Y3	Y2	Y1	Y0
 Byte5	Y15	Y14	Y13	Y12	Y11	Y10	Y9	Y8
 Byte6	Z7	Z6	Z5	Z4	Z3	Z2	Z1	Z0
 Byte7	T&P	Z14	Z13	Z12	Z11	Z10	Z9	Z8
+======= ======= ======= ======= ======= ======= ======= ======= =====
 
-SW1-SW3:	SW ON/OFF status
-Xn_15-0(16bit):X Absolute data
-Yn_15-0(16bit):Y Absolute data
-Zn_14-0(15bit):Z
+SW1-SW3:
+	SW ON/OFF status
+Xn_15-0(16bit):
+	X Absolute data
+Yn_15-0(16bit):
+	Y Absolute data
+Zn_14-0(15bit):
+	Z
diff --git a/Documentation/hid/hid-sensor.txt b/Documentation/hid/hid-sensor.rst
similarity index 61%
rename from Documentation/hid/hid-sensor.txt
rename to Documentation/hid/hid-sensor.rst
index b287752a31cd..758972e34971 100644
--- a/Documentation/hid/hid-sensor.txt
+++ b/Documentation/hid/hid-sensor.rst
@@ -1,6 +1,6 @@
-
+=====================
 HID Sensors Framework
-======================
+=====================
 HID sensor framework provides necessary interfaces to implement sensor drivers,
 which are connected to a sensor hub. The sensor hub is a HID device and it provides
 a report descriptor conforming to HID 1.12 sensor usage tables.
@@ -15,22 +15,22 @@ the drivers themselves."
 This specification describes many usage IDs, which describe the type of sensor
 and also the individual data fields. Each sensor can have variable number of
 data fields. The length and order is specified in the report descriptor. For
-example a part of report descriptor can look like:
+example a part of report descriptor can look like::
 
-   INPUT(1)[INPUT]
- ..
-    Field(2)
-      Physical(0020.0073)
-      Usage(1)
-        0020.045f
-      Logical Minimum(-32767)
-      Logical Maximum(32767)
-      Report Size(8)
-      Report Count(1)
-      Report Offset(16)
-      Flags(Variable Absolute)
-..
-..
+     INPUT(1)[INPUT]
+   ..
+      Field(2)
+        Physical(0020.0073)
+        Usage(1)
+          0020.045f
+        Logical Minimum(-32767)
+        Logical Maximum(32767)
+        Report Size(8)
+        Report Count(1)
+        Report Offset(16)
+        Flags(Variable Absolute)
+  ..
+  ..
 
 The report is indicating "sensor page (0x20)" contains an accelerometer-3D (0x73).
 This accelerometer-3D has some fields. Here for example field 2 is motion intensity
@@ -40,13 +40,14 @@ data will use this format.
 
 
 Implementation
-=================
+==============
 
 This specification defines many different types of sensors with different sets of
 data fields. It is difficult to have a common input event to user space applications,
 for different sensors. For example an accelerometer can send X,Y and Z data, whereas
 an ambient light sensor can send illumination data.
 So the implementation has two parts:
+
 - Core hid driver
 - Individual sensor processing part (sensor drivers)
 
@@ -55,8 +56,11 @@ Core driver
 The core driver registers (hid-sensor-hub) registers as a HID driver. It parses
 report descriptors and identifies all the sensors present. It adds an MFD device
 with name HID-SENSOR-xxxx (where xxxx is usage id from the specification).
-For example
+
+For example:
+
 HID-SENSOR-200073 is registered for an Accelerometer 3D driver.
+
 So if any driver with this name is inserted, then the probe routine for that
 function will be called. So an accelerometer processing driver can register
 with this name and will be probed if there is an accelerometer-3D detected.
@@ -66,7 +70,8 @@ drivers to register and get events for that usage id. Also it provides parsing
 functions, which get and set each input/feature/output report.
 
 Individual sensor processing part (sensor drivers)
------------
+--------------------------------------------------
+
 The processing driver will use an interface provided by the core driver to parse
 the report and get the indexes of the fields and also can get events. This driver
 can use IIO interface to use the standard ABI defined for a type of sensor.
@@ -75,31 +80,34 @@ can use IIO interface to use the standard ABI defined for a type of sensor.
 Core driver Interface
 =====================
 
-Callback structure:
-Each processing driver can use this structure to set some callbacks.
+Callback structure::
+
+  Each processing driver can use this structure to set some callbacks.
 	int (*suspend)(..): Callback when HID suspend is received
 	int (*resume)(..): Callback when HID resume is received
 	int (*capture_sample)(..): Capture a sample for one of its data fields
 	int (*send_event)(..): One complete event is received which can have
                                multiple data fields.
 
-Registration functions:
-int sensor_hub_register_callback(struct hid_sensor_hub_device *hsdev,
+Registration functions::
+
+  int sensor_hub_register_callback(struct hid_sensor_hub_device *hsdev,
 			u32 usage_id,
 			struct hid_sensor_hub_callbacks *usage_callback):
 
 Registers callbacks for an usage id. The callback functions are not allowed
-to sleep.
+to sleep::
 
 
-int sensor_hub_remove_callback(struct hid_sensor_hub_device *hsdev,
+  int sensor_hub_remove_callback(struct hid_sensor_hub_device *hsdev,
 			u32 usage_id):
 
 Removes callbacks for an usage id.
 
 
-Parsing function:
-int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev,
+Parsing function::
+
+  int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev,
 			u8 type,
 			u32 usage_id, u32 attr_usage_id,
 			struct hid_sensor_hub_attribute_info *info);
@@ -110,26 +118,27 @@ so that fields can be set or get individually.
 These indexes avoid searching every time and getting field index to get or set.
 
 
-Set Feature report
-int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
+Set Feature report::
+
+  int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
 			u32 field_index, s32 value);
 
 This interface is used to set a value for a field in feature report. For example
 if there is a field report_interval, which is parsed by a call to
-sensor_hub_input_get_attribute_info before, then it can directly set that individual
-field.
+sensor_hub_input_get_attribute_info before, then it can directly set that
+individual field::
 
 
-int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
+  int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
 			u32 field_index, s32 *value);
 
 This interface is used to get a value for a field in input report. For example
 if there is a field report_interval, which is parsed by a call to
-sensor_hub_input_get_attribute_info before, then it can directly get that individual
-field value.
+sensor_hub_input_get_attribute_info before, then it can directly get that
+individual field value::
 
 
-int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev,
+  int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev,
 			u32 usage_id,
 			u32 attr_usage_id, u32 report_id);
 
@@ -143,6 +152,8 @@ registered callback function to process the sample.
 ----------
 
 HID Custom and generic Sensors
+------------------------------
+
 
 HID Sensor specification defines two special sensor usage types. Since they
 don't represent a standard sensor, it is not possible to define using Linux IIO
@@ -158,66 +169,73 @@ keyboard attached/detached or lid open/close.
 To allow application to utilize these sensors, here they are exported uses sysfs
 attribute groups, attributes and misc device interface.
 
-An example of this representation on sysfs:
-/sys/devices/pci0000:00/INT33C2:00/i2c-0/i2c-INT33D1:00/0018:8086:09FA.0001/HID-SENSOR-2000e1.6.auto$ tree -R
-.
-????????? enable_sensor
-????????? feature-0-200316
-??????? ????????? feature-0-200316-maximum
-??????? ????????? feature-0-200316-minimum
-??????? ????????? feature-0-200316-name
-??????? ????????? feature-0-200316-size
-??????? ????????? feature-0-200316-unit-expo
-??????? ????????? feature-0-200316-units
-??????? ????????? feature-0-200316-value
-????????? feature-1-200201
-??????? ????????? feature-1-200201-maximum
-??????? ????????? feature-1-200201-minimum
-??????? ????????? feature-1-200201-name
-??????? ????????? feature-1-200201-size
-??????? ????????? feature-1-200201-unit-expo
-??????? ????????? feature-1-200201-units
-??????? ????????? feature-1-200201-value
-????????? input-0-200201
-??????? ????????? input-0-200201-maximum
-??????? ????????? input-0-200201-minimum
-??????? ????????? input-0-200201-name
-??????? ????????? input-0-200201-size
-??????? ????????? input-0-200201-unit-expo
-??????? ????????? input-0-200201-units
-??????? ????????? input-0-200201-value
-????????? input-1-200202
-??????? ????????? input-1-200202-maximum
-??????? ????????? input-1-200202-minimum
-??????? ????????? input-1-200202-name
-??????? ????????? input-1-200202-size
-??????? ????????? input-1-200202-unit-expo
-??????? ????????? input-1-200202-units
-??????? ????????? input-1-200202-value
+An example of this representation on sysfs::
+
+  /sys/devices/pci0000:00/INT33C2:00/i2c-0/i2c-INT33D1:00/0018:8086:09FA.0001/HID-SENSOR-2000e1.6.auto$ tree -R
+  .
+  │   ├──  enable_sensor
+  │   │   ├── feature-0-200316
+  │   │   │   ├── feature-0-200316-maximum
+  │   │   │   ├── feature-0-200316-minimum
+  │   │   │   ├── feature-0-200316-name
+  │   │   │   ├── feature-0-200316-size
+  │   │   │   ├── feature-0-200316-unit-expo
+  │   │   │   ├── feature-0-200316-units
+  │   │   │   ├── feature-0-200316-value
+  │   │   ├── feature-1-200201
+  │   │   │   ├── feature-1-200201-maximum
+  │   │   │   ├── feature-1-200201-minimum
+  │   │   │   ├── feature-1-200201-name
+  │   │   │   ├── feature-1-200201-size
+  │   │   │   ├── feature-1-200201-unit-expo
+  │   │   │   ├── feature-1-200201-units
+  │   │   │   ├── feature-1-200201-value
+  │   │   ├── input-0-200201
+  │   │   │   ├── input-0-200201-maximum
+  │   │   │   ├── input-0-200201-minimum
+  │   │   │   ├── input-0-200201-name
+  │   │   │   ├── input-0-200201-size
+  │   │   │   ├── input-0-200201-unit-expo
+  │   │   │   ├── input-0-200201-units
+  │   │   │   ├── input-0-200201-value
+  │   │   ├── input-1-200202
+  │   │   │   ├── input-1-200202-maximum
+  │   │   │   ├── input-1-200202-minimum
+  │   │   │   ├── input-1-200202-name
+  │   │   │   ├── input-1-200202-size
+  │   │   │   ├── input-1-200202-unit-expo
+  │   │   │   ├── input-1-200202-units
+  │   │   │   ├── input-1-200202-value
 
 Here there is a custom sensors with four fields, two feature and two inputs.
 Each field is represented by a set of attributes. All fields except the "value"
 are read only. The value field is a RW field.
-Example
-/sys/bus/platform/devices/HID-SENSOR-2000e1.6.auto/feature-0-200316$ grep -r . *
-feature-0-200316-maximum:6
-feature-0-200316-minimum:0
-feature-0-200316-name:property-reporting-state
-feature-0-200316-size:1
-feature-0-200316-unit-expo:0
-feature-0-200316-units:25
-feature-0-200316-value:1
+
+Example::
+
+  /sys/bus/platform/devices/HID-SENSOR-2000e1.6.auto/feature-0-200316$ grep -r . *
+  feature-0-200316-maximum:6
+  feature-0-200316-minimum:0
+  feature-0-200316-name:property-reporting-state
+  feature-0-200316-size:1
+  feature-0-200316-unit-expo:0
+  feature-0-200316-units:25
+  feature-0-200316-value:1
 
 How to enable such sensor?
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
 By default sensor can be power gated. To enable sysfs attribute "enable" can be
-used.
-$ echo 1 > enable_sensor
+used::
+
+	$ echo 1 > enable_sensor
 
 Once enabled and powered on, sensor can report value using HID reports.
-These reports are pushed using misc device interface in a FIFO order.
-/dev$ tree | grep HID-SENSOR-2000e1.6.auto
-??????? ????????? 10:53 -> ../HID-SENSOR-2000e1.6.auto
-????????? HID-SENSOR-2000e1.6.auto
+These reports are pushed using misc device interface in a FIFO order::
+
+	/dev$ tree | grep HID-SENSOR-2000e1.6.auto
+	│   │   │   ├── 10:53 -> ../HID-SENSOR-2000e1.6.auto
+	│   ├──  HID-SENSOR-2000e1.6.auto
 
 Each reports can be of variable length preceded by a header. This header
 consist of a 32 bit usage id, 64 bit time stamp and 32 bit length field of raw
diff --git a/Documentation/hid/hid-transport.txt b/Documentation/hid/hid-transport.rst
similarity index 93%
rename from Documentation/hid/hid-transport.txt
rename to Documentation/hid/hid-transport.rst
index 3dcba9fd4a3a..6f3aaa86ce7b 100644
--- a/Documentation/hid/hid-transport.txt
+++ b/Documentation/hid/hid-transport.rst
@@ -1,5 +1,6 @@
-                          HID I/O Transport Drivers
-                         ===========================
+=========================
+HID I/O Transport Drivers
+=========================
 
 The HID subsystem is independent of the underlying transport driver. Initially,
 only USB was supported, but other specifications adopted the HID design and
@@ -16,6 +17,8 @@ transport and device setup/management. HID core is responsible of
 report-parsing, report interpretation and the user-space API. Device specifics
 and quirks are handled by all layers depending on the quirk.
 
+::
+
  +-----------+  +-----------+            +-----------+  +-----------+
  | Device #1 |  | Device #i |            | Device #j |  | Device #k |
  +-----------+  +-----------+            +-----------+  +-----------+
@@ -42,8 +45,9 @@ and quirks are handled by all layers depending on the quirk.
  +----------------+  +-----------+  +------------------+  +------------------+
 
 Example Drivers:
-  I/O: USB, I2C, Bluetooth-l2cap
-  Transport: USB-HID, I2C-HID, BT-HIDP
+
+  - I/O: USB, I2C, Bluetooth-l2cap
+  - Transport: USB-HID, I2C-HID, BT-HIDP
 
 Everything below "HID Core" is simplified in this graph as it is only of
 interest to HID device drivers. Transport drivers do not need to know the
@@ -183,7 +187,7 @@ Other ctrl-channel requests are supported by USB-HID but are not available
 -------------------
 
 Transport drivers normally use the following procedure to register a new device
-with HID core:
+with HID core::
 
 	struct hid_device *hid;
 	int ret;
@@ -215,7 +219,7 @@ Once hid_add_device() is entered, HID core might use the callbacks provided in
 "custom_ll_driver". Note that fields like "country" can be ignored by underlying
 transport-drivers if not supported.
 
-To unregister a device, use:
+To unregister a device, use::
 
 	hid_destroy_device(hid);
 
@@ -226,73 +230,110 @@ driver callbacks.
 -----------------------------
 
 The available HID callbacks are:
- - int (*start) (struct hid_device *hdev)
+
+   ::
+
+      int (*start) (struct hid_device *hdev)
+
    Called from HID device drivers once they want to use the device. Transport
    drivers can choose to setup their device in this callback. However, normally
    devices are already set up before transport drivers register them to HID core
    so this is mostly only used by USB-HID.
 
- - void (*stop) (struct hid_device *hdev)
+   ::
+
+      void (*stop) (struct hid_device *hdev)
+
    Called from HID device drivers once they are done with a device. Transport
    drivers can free any buffers and deinitialize the device. But note that
    ->start() might be called again if another HID device driver is loaded on the
    device.
+
    Transport drivers are free to ignore it and deinitialize devices after they
    destroyed them via hid_destroy_device().
 
- - int (*open) (struct hid_device *hdev)
+   ::
+
+      int (*open) (struct hid_device *hdev)
+
    Called from HID device drivers once they are interested in data reports.
    Usually, while user-space didn't open any input API/etc., device drivers are
    not interested in device data and transport drivers can put devices asleep.
    However, once ->open() is called, transport drivers must be ready for I/O.
    ->open() calls are nested for each client that opens the HID device.
 
- - void (*close) (struct hid_device *hdev)
+   ::
+
+      void (*close) (struct hid_device *hdev)
+
    Called from HID device drivers after ->open() was called but they are no
    longer interested in device reports. (Usually if user-space closed any input
    devices of the driver).
+
    Transport drivers can put devices asleep and terminate any I/O of all
    ->open() calls have been followed by a ->close() call. However, ->start() may
    be called again if the device driver is interested in input reports again.
 
- - int (*parse) (struct hid_device *hdev)
+   ::
+
+      int (*parse) (struct hid_device *hdev)
+
    Called once during device setup after ->start() has been called. Transport
    drivers must read the HID report-descriptor from the device and tell HID core
    about it via hid_parse_report().
 
- - int (*power) (struct hid_device *hdev, int level)
+   ::
+
+      int (*power) (struct hid_device *hdev, int level)
+
    Called by HID core to give PM hints to transport drivers. Usually this is
    analogical to the ->open() and ->close() hints and redundant.
 
- - void (*request) (struct hid_device *hdev, struct hid_report *report,
-                    int reqtype)
+   ::
+
+      void (*request) (struct hid_device *hdev, struct hid_report *report,
+		       int reqtype)
+
    Send an HID request on the ctrl channel. "report" contains the report that
    should be sent and "reqtype" the request type. Request-type can be
    HID_REQ_SET_REPORT or HID_REQ_GET_REPORT.
+
    This callback is optional. If not provided, HID core will assemble a raw
    report following the HID specs and send it via the ->raw_request() callback.
    The transport driver is free to implement this asynchronously.
 
- - int (*wait) (struct hid_device *hdev)
+   ::
+
+      int (*wait) (struct hid_device *hdev)
+
    Used by HID core before calling ->request() again. A transport driver can use
    it to wait for any pending requests to complete if only one request is
    allowed at a time.
 
- - int (*raw_request) (struct hid_device *hdev, unsigned char reportnum,
-                       __u8 *buf, size_t count, unsigned char rtype,
-                       int reqtype)
+   ::
+
+      int (*raw_request) (struct hid_device *hdev, unsigned char reportnum,
+                          __u8 *buf, size_t count, unsigned char rtype,
+                          int reqtype)
+
    Same as ->request() but provides the report as raw buffer. This request shall
    be synchronous. A transport driver must not use ->wait() to complete such
    requests. This request is mandatory and hid core will reject the device if
    it is missing.
 
- - int (*output_report) (struct hid_device *hdev, __u8 *buf, size_t len)
+   ::
+
+      int (*output_report) (struct hid_device *hdev, __u8 *buf, size_t len)
+
    Send raw output report via intr channel. Used by some HID device drivers
    which require high throughput for outgoing requests on the intr channel. This
    must not cause SET_REPORT calls! This must be implemented as asynchronous
    output report on the intr channel!
 
- - int (*idle) (struct hid_device *hdev, int report, int idle, int reqtype)
+   ::
+
+      int (*idle) (struct hid_device *hdev, int report, int idle, int reqtype)
+
    Perform SET/GET_IDLE request. Only used by USB-HID, do not implement!
 
 2.3) Data Path
@@ -314,4 +355,5 @@ transport driver and not passed to hid_input_report().
 Acknowledgements to SET_REPORT requests are not of interest to HID core.
 
 ----------------------------------------------------
+
 Written 2013, David Herrmann <dh.herrmann@gmail.com>
diff --git a/Documentation/hid/hiddev.txt b/Documentation/hid/hiddev.rst
similarity index 80%
rename from Documentation/hid/hiddev.txt
rename to Documentation/hid/hiddev.rst
index 638448707aa2..16c663530db2 100644
--- a/Documentation/hid/hiddev.txt
+++ b/Documentation/hid/hiddev.rst
@@ -1,6 +1,9 @@
+================================================
 Care and feeding of your Human Interface Devices
+================================================
 
-INTRODUCTION
+Introduction
+============
 
 In addition to the normal input type HID devices, USB also uses the
 human interface device protocols for things that are not really human
@@ -16,7 +19,7 @@ normalised event interface - see Documentation/input/input.rst
 * the hiddev interface, which provides fairly raw HID events
 
 The data flow for a HID event produced by a device is something like
-the following :
+the following::
 
  usb.c ---> hid-core.c  ----> hid-input.c ----> [keyboard/mouse/joystick/event]
                          |
@@ -27,27 +30,29 @@ In addition, other subsystems (apart from USB) can potentially feed
 events into the input subsystem, but these have no effect on the hid
 device interface.
 
-USING THE HID DEVICE INTERFACE
+Using the HID Device Interface
+==============================
 
 The hiddev interface is a char interface using the normal USB major,
 with the minor numbers starting at 96 and finishing at 111. Therefore,
-you need the following commands:
-mknod /dev/usb/hiddev0 c 180 96
-mknod /dev/usb/hiddev1 c 180 97
-mknod /dev/usb/hiddev2 c 180 98
-mknod /dev/usb/hiddev3 c 180 99
-mknod /dev/usb/hiddev4 c 180 100
-mknod /dev/usb/hiddev5 c 180 101
-mknod /dev/usb/hiddev6 c 180 102
-mknod /dev/usb/hiddev7 c 180 103
-mknod /dev/usb/hiddev8 c 180 104
-mknod /dev/usb/hiddev9 c 180 105
-mknod /dev/usb/hiddev10 c 180 106
-mknod /dev/usb/hiddev11 c 180 107
-mknod /dev/usb/hiddev12 c 180 108
-mknod /dev/usb/hiddev13 c 180 109
-mknod /dev/usb/hiddev14 c 180 110
-mknod /dev/usb/hiddev15 c 180 111
+you need the following commands::
+
+	mknod /dev/usb/hiddev0 c 180 96
+	mknod /dev/usb/hiddev1 c 180 97
+	mknod /dev/usb/hiddev2 c 180 98
+	mknod /dev/usb/hiddev3 c 180 99
+	mknod /dev/usb/hiddev4 c 180 100
+	mknod /dev/usb/hiddev5 c 180 101
+	mknod /dev/usb/hiddev6 c 180 102
+	mknod /dev/usb/hiddev7 c 180 103
+	mknod /dev/usb/hiddev8 c 180 104
+	mknod /dev/usb/hiddev9 c 180 105
+	mknod /dev/usb/hiddev10 c 180 106
+	mknod /dev/usb/hiddev11 c 180 107
+	mknod /dev/usb/hiddev12 c 180 108
+	mknod /dev/usb/hiddev13 c 180 109
+	mknod /dev/usb/hiddev14 c 180 110
+	mknod /dev/usb/hiddev15 c 180 111
 
 So you point your hiddev compliant user-space program at the correct
 interface for your device, and it all just works.
@@ -56,7 +61,9 @@ Assuming that you have a hiddev compliant user-space program, of
 course. If you need to write one, read on.
 
 
-THE HIDDEV API
+The HIDDEV API
+==============
+
 This description should be read in conjunction with the HID
 specification, freely available from http://www.usb.org, and
 conveniently linked of http://www.linux-usb.org.
@@ -69,12 +76,14 @@ each of which can have one or more "usages".  In the hid-core,
 each one of these usages has a single signed 32 bit value.
 
 read():
+-------
+
 This is the event interface.  When the HID device's state changes,
 it performs an interrupt transfer containing a report which contains
 the changed value.  The hid-core.c module parses the report, and
 returns to hiddev.c the individual usages that have changed within
 the report.  In its basic mode, the hiddev will make these individual
-usage changes available to the reader using a struct hiddev_event:
+usage changes available to the reader using a struct hiddev_event::
 
        struct hiddev_event {
            unsigned hid;
@@ -91,12 +100,18 @@ ioctl() described below.
 
 
 ioctl(): 
+--------
+
 This is the control interface. There are a number of controls: 
 
-HIDIOCGVERSION - int (read)
-Gets the version code out of the hiddev driver.
+HIDIOCGVERSION
+  - int (read)
+
+ Gets the version code out of the hiddev driver.
+
+HIDIOCAPPLICATION
+  - (none)
 
-HIDIOCAPPLICATION - (none)
 This ioctl call returns the HID application usage associated with the
 hid device. The third argument to ioctl() specifies which application
 index to get. This is useful when the device has more than one
@@ -106,7 +121,9 @@ returns -1. You can find out beforehand how many application
 collections the device has from the num_applications field from the
 hiddev_devinfo structure. 
 
-HIDIOCGCOLLECTIONINFO - struct hiddev_collection_info (read/write)
+HIDIOCGCOLLECTIONINFO
+  - struct hiddev_collection_info (read/write)
+
 This returns a superset of the information above, providing not only
 application collections, but all the collections the device has.  It
 also returns the level the collection lives in the hierarchy.
@@ -115,14 +132,20 @@ field set to the index that should be returned.  The ioctl fills in
 the other fields.  If the index is larger than the last collection 
 index, the ioctl returns -1 and sets errno to -EINVAL.
 
-HIDIOCGDEVINFO - struct hiddev_devinfo (read)
+HIDIOCGDEVINFO
+  - struct hiddev_devinfo (read)
+
 Gets a hiddev_devinfo structure which describes the device.
 
-HIDIOCGSTRING - struct hiddev_string_descriptor (read/write)
+HIDIOCGSTRING
+  - struct hiddev_string_descriptor (read/write)
+
 Gets a string descriptor from the device. The caller must fill in the
 "index" field to indicate which descriptor should be returned.
 
-HIDIOCINITREPORT - (none)
+HIDIOCINITREPORT
+  - (none)
+
 Instructs the kernel to retrieve all input and feature report values
 from the device. At this point, all the usage structures will contain
 current values for the device, and will maintain it as the device
@@ -130,21 +153,29 @@ changes.  Note that the use of this ioctl is unnecessary in general,
 since later kernels automatically initialize the reports from the
 device at attach time.
 
-HIDIOCGNAME - string (variable length)
+HIDIOCGNAME
+  - string (variable length)
+
 Gets the device name
 
-HIDIOCGREPORT - struct hiddev_report_info (write)
+HIDIOCGREPORT
+  - struct hiddev_report_info (write)
+
 Instructs the kernel to get a feature or input report from the device,
 in order to selectively update the usage structures (in contrast to
 INITREPORT).
 
-HIDIOCSREPORT - struct hiddev_report_info (write)
+HIDIOCSREPORT
+  - struct hiddev_report_info (write)
+
 Instructs the kernel to send a report to the device. This report can
 be filled in by the user through HIDIOCSUSAGE calls (below) to fill in
 individual usage values in the report before sending the report in full
 to the device. 
 
-HIDIOCGREPORTINFO - struct hiddev_report_info (read/write)
+HIDIOCGREPORTINFO
+  - struct hiddev_report_info (read/write)
+
 Fills in a hiddev_report_info structure for the user. The report is
 looked up by type (input, output or feature) and id, so these fields
 must be filled in by the user. The ID can be absolute -- the actual
@@ -156,19 +187,25 @@ use the relative IDs above to enumerate the valid IDs. The ioctl
 returns non-zero when there is no more next ID. The real report ID is
 filled into the returned hiddev_report_info structure. 
 
-HIDIOCGFIELDINFO - struct hiddev_field_info (read/write)
+HIDIOCGFIELDINFO
+  - struct hiddev_field_info (read/write)
+
 Returns the field information associated with a report in a
 hiddev_field_info structure. The user must fill in report_id and
 report_type in this structure, as above. The field_index should also
 be filled in, which should be a number from 0 and maxfield-1, as
 returned from a previous HIDIOCGREPORTINFO call. 
 
-HIDIOCGUCODE - struct hiddev_usage_ref (read/write)
+HIDIOCGUCODE
+  - struct hiddev_usage_ref (read/write)
+
 Returns the usage_code in a hiddev_usage_ref structure, given that
 given its report type, report id, field index, and index within the
 field have already been filled into the structure.
 
-HIDIOCGUSAGE - struct hiddev_usage_ref (read/write)
+HIDIOCGUSAGE
+  - struct hiddev_usage_ref (read/write)
+
 Returns the value of a usage in a hiddev_usage_ref structure. The
 usage to be retrieved can be specified as above, or the user can
 choose to fill in the report_type field and specify the report_id as
@@ -176,28 +213,37 @@ HID_REPORT_ID_UNKNOWN. In this case, the hiddev_usage_ref will be
 filled in with the report and field information associated with this
 usage if it is found. 
 
-HIDIOCSUSAGE - struct hiddev_usage_ref (write)
+HIDIOCSUSAGE
+  - struct hiddev_usage_ref (write)
+
 Sets the value of a usage in an output report.  The user fills in
 the hiddev_usage_ref structure as above, but additionally fills in
 the value field.
 
-HIDIOGCOLLECTIONINDEX - struct hiddev_usage_ref (write)
+HIDIOGCOLLECTIONINDEX
+  - struct hiddev_usage_ref (write)
+
 Returns the collection index associated with this usage.  This
 indicates where in the collection hierarchy this usage sits.
 
-HIDIOCGFLAG - int (read)
-HIDIOCSFLAG - int (write)
+HIDIOCGFLAG
+  - int (read)
+HIDIOCSFLAG
+  - int (write)
+
 These operations respectively inspect and replace the mode flags
 that influence the read() call above.  The flags are as follows:
 
-    HIDDEV_FLAG_UREF - read() calls will now return 
+    HIDDEV_FLAG_UREF
+      - read() calls will now return
         struct hiddev_usage_ref instead of struct hiddev_event.
         This is a larger structure, but in situations where the
         device has more than one usage in its reports with the
         same usage code, this mode serves to resolve such
         ambiguity.
 
-    HIDDEV_FLAG_REPORT - This flag can only be used in conjunction
+    HIDDEV_FLAG_REPORT
+      - This flag can only be used in conjunction
         with HIDDEV_FLAG_UREF.  With this flag set, when the device
         sends a report, a struct hiddev_usage_ref will be returned
         to read() filled in with the report_type and report_id, but 
diff --git a/Documentation/hid/hidraw.txt b/Documentation/hid/hidraw.rst
similarity index 89%
rename from Documentation/hid/hidraw.txt
rename to Documentation/hid/hidraw.rst
index c8436e354f44..4a4a0ba1f362 100644
--- a/Documentation/hid/hidraw.txt
+++ b/Documentation/hid/hidraw.rst
@@ -1,5 +1,6 @@
-      HIDRAW - Raw Access to USB and Bluetooth Human Interface Devices
-     ==================================================================
+================================================================
+HIDRAW - Raw Access to USB and Bluetooth Human Interface Devices
+================================================================
 
 The hidraw driver provides a raw interface to USB and Bluetooth Human
 Interface Devices (HIDs).  It differs from hiddev in that reports sent and
@@ -31,6 +32,7 @@ directly under /dev (eg: /dev/hidraw0).  As this location is distribution-
 and udev rule-dependent, applications should use libudev to locate hidraw
 devices attached to the system.  There is a tutorial on libudev with a
 working example at:
+
 	http://www.signal11.us/oss/udev/
 
 The HIDRAW API
@@ -51,7 +53,7 @@ byte.  For devices which do not use numbered reports, the report data
 will begin at the first byte.
 
 write()
---------
+-------
 The write() function will write a report to the device. For USB devices, if
 the device has an INTERRUPT OUT endpoint, the report will be sent on that
 endpoint. If it does not, the report will be sent over the control endpoint,
@@ -62,38 +64,52 @@ number.  If the device does not use numbered reports, the first byte should
 be set to 0. The report data itself should begin at the second byte.
 
 ioctl()
---------
+-------
 Hidraw supports the following ioctls:
 
-HIDIOCGRDESCSIZE: Get Report Descriptor Size
+HIDIOCGRDESCSIZE:
+	Get Report Descriptor Size
+
 This ioctl will get the size of the device's report descriptor.
 
-HIDIOCGRDESC: Get Report Descriptor
+HIDIOCGRDESC:
+	Get Report Descriptor
+
 This ioctl returns the device's report descriptor using a
 hidraw_report_descriptor struct.  Make sure to set the size field of the
 hidraw_report_descriptor struct to the size returned from HIDIOCGRDESCSIZE.
 
-HIDIOCGRAWINFO: Get Raw Info
+HIDIOCGRAWINFO:
+	Get Raw Info
+
 This ioctl will return a hidraw_devinfo struct containing the bus type, the
 vendor ID (VID), and product ID (PID) of the device. The bus type can be one
-of:
-	BUS_USB
-	BUS_HIL
-	BUS_BLUETOOTH
-	BUS_VIRTUAL
+of::
+
+	- BUS_USB
+	- BUS_HIL
+	- BUS_BLUETOOTH
+	- BUS_VIRTUAL
+
 which are defined in uapi/linux/input.h.
 
-HIDIOCGRAWNAME(len): Get Raw Name
+HIDIOCGRAWNAME(len):
+	Get Raw Name
+
 This ioctl returns a string containing the vendor and product strings of
 the device.  The returned string is Unicode, UTF-8 encoded.
 
-HIDIOCGRAWPHYS(len): Get Physical Address
+HIDIOCGRAWPHYS(len):
+	Get Physical Address
+
 This ioctl returns a string representing the physical address of the device.
 For USB devices, the string contains the physical path to the device (the
 USB controller, hubs, ports, etc).  For Bluetooth devices, the string
 contains the hardware (MAC) address of the device.
 
-HIDIOCSFEATURE(len): Send a Feature Report
+HIDIOCSFEATURE(len):
+	Send a Feature Report
+
 This ioctl will send a feature report to the device.  Per the HID
 specification, feature reports are always sent using the control endpoint.
 Set the first byte of the supplied buffer to the report number.  For devices
@@ -101,7 +117,9 @@ which do not use numbered reports, set the first byte to 0. The report data
 begins in the second byte. Make sure to set len accordingly, to one more
 than the length of the report (to account for the report number).
 
-HIDIOCGFEATURE(len): Get a Feature Report
+HIDIOCGFEATURE(len):
+	Get a Feature Report
+
 This ioctl will request a feature report from the device using the control
 endpoint.  The first byte of the supplied buffer should be set to the report
 number of the requested report.  For devices which do not use numbered
@@ -109,11 +127,12 @@ reports, set the first byte to 0.  The report will be returned starting at
 the first byte of the buffer (ie: the report number is not returned).
 
 Example
----------
+-------
 In samples/, find hid-example.c, which shows examples of read(), write(),
 and all the ioctls for hidraw.  The code may be used by anyone for any
 purpose, and can serve as a starting point for developing applications using
 hidraw.
 
 Document by:
+
 	Alan Ott <alan@signal11.us>, Signal 11 Software
diff --git a/Documentation/hid/index.rst b/Documentation/hid/index.rst
new file mode 100644
index 000000000000..af4324902622
--- /dev/null
+++ b/Documentation/hid/index.rst
@@ -0,0 +1,18 @@
+:orphan:
+
+=============================
+Human Interface Devices (HID)
+=============================
+
+.. toctree::
+   :maxdepth: 1
+
+   hiddev
+   hidraw
+   hid-sensor
+   hid-transport
+
+   uhid
+
+   hid-alps
+   intel-ish-hid
diff --git a/Documentation/hid/intel-ish-hid.rst b/Documentation/hid/intel-ish-hid.rst
new file mode 100644
index 000000000000..cccbf4be17d7
--- /dev/null
+++ b/Documentation/hid/intel-ish-hid.rst
@@ -0,0 +1,485 @@
+=================================
+Intel Integrated Sensor Hub (ISH)
+=================================
+
+A sensor hub enables the ability to offload sensor polling and algorithm
+processing to a dedicated low power co-processor. This allows the core
+processor to go into low power modes more often, resulting in the increased
+battery life.
+
+There are many vendors providing external sensor hubs confirming to HID
+Sensor usage tables, and used in several tablets, 2 in 1 convertible laptops
+and embedded products. Linux had this support since Linux 3.9.
+
+Intel® introduced integrated sensor hubs as a part of the SoC starting from
+Cherry Trail and now supported on multiple generations of CPU packages. There
+are many commercial devices already shipped with Integrated Sensor Hubs (ISH).
+These ISH also comply to HID sensor specification, but the  difference is the
+transport protocol used for communication. The current external sensor hubs
+mainly use HID over i2C or USB. But ISH doesn't use either i2c or USB.
+
+1. Overview
+===========
+
+Using a analogy with a usbhid implementation, the ISH follows a similar model
+for a very high speed communication::
+
+	-----------------		----------------------
+	|    USB HID	|	-->	|    ISH HID	     |
+	-----------------		----------------------
+	-----------------		----------------------
+	|  USB protocol	|	-->	|    ISH Transport   |
+	-----------------		----------------------
+	-----------------		----------------------
+	|  EHCI/XHCI	|	-->	|    ISH IPC	     |
+	-----------------		----------------------
+	      PCI				 PCI
+	-----------------		----------------------
+        |Host controller|	-->	|    ISH processor   |
+	-----------------		----------------------
+	     USB Link
+	-----------------		----------------------
+	| USB End points|	-->	|    ISH Clients     |
+	-----------------		----------------------
+
+Like USB protocol provides a method for device enumeration, link management
+and user data encapsulation, the ISH also provides similar services. But it is
+very light weight tailored to manage and communicate with ISH client
+applications implemented in the firmware.
+
+The ISH allows multiple sensor management applications executing in the
+firmware. Like USB endpoints the messaging can be to/from a client. As part of
+enumeration process, these clients are identified. These clients can be simple
+HID sensor applications, sensor calibration application or senor firmware
+update application.
+
+The implementation model is similar, like USB bus, ISH transport is also
+implemented as a bus. Each client application executing in the ISH processor
+is registered as a device on this bus. The driver, which binds each device
+(ISH HID driver) identifies the device type and registers with the hid core.
+
+2. ISH Implementation: Block Diagram
+====================================
+
+::
+
+	 ---------------------------
+	|  User Space Applications  |
+	 ---------------------------
+
+  ----------------IIO ABI----------------
+	 --------------------------
+	|  IIO Sensor Drivers	  |
+	 --------------------------
+	 --------------------------
+	|	 IIO core	  |
+	 --------------------------
+	 --------------------------
+	|   HID Sensor Hub MFD	  |
+	 --------------------------
+	 --------------------------
+	|       HID Core	  |
+	 --------------------------
+	 --------------------------
+	|   HID over ISH Client   |
+	 --------------------------
+	 --------------------------
+	|   ISH Transport (ISHTP) |
+	 --------------------------
+	 --------------------------
+	|      IPC Drivers	  |
+	 --------------------------
+  OS
+  ---------------- PCI -----------------
+  Hardware + Firmware
+	 ----------------------------
+	| ISH Hardware/Firmware(FW) |
+	 ----------------------------
+
+3. High level processing in above blocks
+========================================
+
+3.1 Hardware Interface
+----------------------
+
+The ISH is exposed as "Non-VGA unclassified PCI device" to the host. The PCI
+product and vendor IDs are changed from different generations of processors. So
+the source code which enumerate drivers needs to update from generation to
+generation.
+
+3.2 Inter Processor Communication (IPC) driver
+----------------------------------------------
+
+Location: drivers/hid/intel-ish-hid/ipc
+
+The IPC message used memory mapped I/O. The registers are defined in
+hw-ish-regs.h.
+
+3.2.1 IPC/FW message types
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+There are two types of messages, one for management of link and other messages
+are to and from transport layers.
+
+TX and RX of Transport messages
+...............................
+
+A set of memory mapped register offers support of multi byte messages TX and
+RX (E.g.IPC_REG_ISH2HOST_MSG, IPC_REG_HOST2ISH_MSG). The IPC layer maintains
+internal queues to sequence messages and send them in order to the FW.
+Optionally the caller can register handler to get notification of completion.
+A door bell mechanism is used in messaging to trigger processing in host and
+client firmware side. When ISH interrupt handler is called, the ISH2HOST
+doorbell register is used by host drivers to determine that the interrupt
+is for ISH.
+
+Each side has 32 32-bit message registers and a 32-bit doorbell. Doorbell
+register has the following format:
+Bits 0..6: fragment length (7 bits are used)
+Bits 10..13: encapsulated protocol
+Bits 16..19: management command (for IPC management protocol)
+Bit 31: doorbell trigger (signal H/W interrupt to the other side)
+Other bits are reserved, should be 0.
+
+3.2.2 Transport layer interface
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+To abstract HW level IPC communication, a set of callbacks are registered.
+The transport layer uses them to send and receive messages.
+Refer to  struct ishtp_hw_ops for callbacks.
+
+3.3 ISH Transport layer
+-----------------------
+
+Location: drivers/hid/intel-ish-hid/ishtp/
+
+3.3.1 A Generic Transport Layer
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The transport layer is a bi-directional protocol, which defines:
+- Set of commands to start, stop, connect, disconnect and flow control
+(ishtp/hbm.h) for details
+- A flow control mechanism to avoid buffer overflows
+
+This protocol resembles bus messages described in the following document:
+http://www.intel.com/content/dam/www/public/us/en/documents/technical-\
+specifications/dcmi-hi-1-0-spec.pdf "Chapter 7: Bus Message Layer"
+
+3.3.2 Connection and Flow Control Mechanism
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Each FW client and a protocol is identified by an UUID. In order to communicate
+to a FW client, a connection must be established using connect request and
+response bus messages. If successful, a pair (host_client_id and fw_client_id)
+will identify the connection.
+
+Once connection is established, peers send each other flow control bus messages
+independently. Every peer may send a message only if it has received a
+flow-control credit before. Once it sent a message, it may not send another one
+before receiving the next flow control credit.
+Either side can send disconnect request bus message to end communication. Also
+the link will be dropped if major FW reset occurs.
+
+3.3.3 Peer to Peer data transfer
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Peer to Peer data transfer can happen with or without using DMA. Depending on
+the sensor bandwidth requirement DMA can be enabled by using module parameter
+ishtp_use_dma under intel_ishtp.
+
+Each side (host and FW) manages its DMA transfer memory independently. When an
+ISHTP client from either host or FW side wants to send something, it decides
+whether to send over IPC or over DMA; for each transfer the decision is
+independent. The sending side sends DMA_XFER message when the message is in
+the respective host buffer (TX when host client sends, RX when FW client
+sends). The recipient of DMA message responds with DMA_XFER_ACK, indicating
+the sender that the memory region for that message may be reused.
+
+DMA initialization is started with host sending DMA_ALLOC_NOTIFY bus message
+(that includes RX buffer) and FW responds with DMA_ALLOC_NOTIFY_ACK.
+Additionally to DMA address communication, this sequence checks capabilities:
+if thw host doesn't support DMA, then it won't send DMA allocation, so FW can't
+send DMA; if FW doesn't support DMA then it won't respond with
+DMA_ALLOC_NOTIFY_ACK, in which case host will not use DMA transfers.
+Here ISH acts as busmaster DMA controller. Hence when host sends DMA_XFER,
+it's request to do host->ISH DMA transfer; when FW sends DMA_XFER, it means
+that it already did DMA and the message resides at host. Thus, DMA_XFER
+and DMA_XFER_ACK act as ownership indicators.
+
+At initial state all outgoing memory belongs to the sender (TX to host, RX to
+FW), DMA_XFER transfers ownership on the region that contains ISHTP message to
+the receiving side, DMA_XFER_ACK returns ownership to the sender. A sender
+needs not wait for previous DMA_XFER to be ack'ed, and may send another message
+as long as remaining continuous memory in its ownership is enough.
+In principle, multiple DMA_XFER and DMA_XFER_ACK messages may be sent at once
+(up to IPC MTU), thus allowing for interrupt throttling.
+Currently, ISH FW decides to send over DMA if ISHTP message is more than 3 IPC
+fragments and via IPC otherwise.
+
+3.3.4 Ring Buffers
+^^^^^^^^^^^^^^^^^^
+
+When a client initiate a connection, a ring or RX and TX buffers are allocated.
+The size of ring can be specified by the client. HID client set 16 and 32 for
+TX and RX buffers respectively. On send request from client, the data to be
+sent is copied to one of the send ring buffer and scheduled to be sent using
+bus message protocol. These buffers are required because the FW may have not
+have processed the last message and may not have enough flow control credits
+to send. Same thing holds true on receive side and flow control is required.
+
+3.3.5 Host Enumeration
+^^^^^^^^^^^^^^^^^^^^^^
+
+The host enumeration bus command allow discovery of clients present in the FW.
+There can be multiple sensor clients and clients for calibration function.
+
+To ease in implantation and allow independent driver handle each client
+this transport layer takes advantage of Linux Bus driver model. Each
+client is registered as device on the the transport bus (ishtp bus).
+
+Enumeration sequence of messages:
+
+- Host sends HOST_START_REQ_CMD, indicating that host ISHTP layer is up.
+- FW responds with HOST_START_RES_CMD
+- Host sends HOST_ENUM_REQ_CMD (enumerate FW clients)
+- FW responds with HOST_ENUM_RES_CMD that includes bitmap of available FW
+  client IDs
+- For each FW ID found in that bitmap host sends
+  HOST_CLIENT_PROPERTIES_REQ_CMD
+- FW responds with HOST_CLIENT_PROPERTIES_RES_CMD. Properties include UUID,
+  max ISHTP message size, etc.
+- Once host received properties for that last discovered client, it considers
+  ISHTP device fully functional (and allocates DMA buffers)
+
+3.4 HID over ISH Client
+-----------------------
+
+Location: drivers/hid/intel-ish-hid
+
+The ISHTP client driver is responsible for:
+
+- enumerate HID devices under FW ISH client
+- Get Report descriptor
+- Register with HID core as a LL driver
+- Process Get/Set feature request
+- Get input reports
+
+3.5 HID Sensor Hub MFD and IIO sensor drivers
+---------------------------------------------
+
+The functionality in these drivers is the same as an external sensor hub.
+Refer to
+Documentation/hid/hid-sensor.rst for HID sensor
+Documentation/ABI/testing/sysfs-bus-iio for IIO ABIs to user space
+
+3.6 End to End HID transport Sequence Diagram
+---------------------------------------------
+
+::
+
+  HID-ISH-CLN                    ISHTP                    IPC                             HW
+          |                        |                       |                               |
+          |                        |                       |-----WAKE UP------------------>|
+          |                        |                       |                               |
+          |                        |                       |-----HOST READY--------------->|
+          |                        |                       |                               |
+          |                        |                       |<----MNG_RESET_NOTIFY_ACK----- |
+          |                        |                       |                               |
+          |                        |<----ISHTP_START------ |                               |
+          |                        |                       |                               |
+          |                        |<-----------------HOST_START_RES_CMD-------------------|
+          |                        |                       |                               |
+          |                        |------------------QUERY_SUBSCRIBER-------------------->|
+          |                        |                       |                               |
+          |                        |------------------HOST_ENUM_REQ_CMD------------------->|
+          |                        |                       |                               |
+          |                        |<-----------------HOST_ENUM_RES_CMD--------------------|
+          |                        |                       |                               |
+          |                        |------------------HOST_CLIENT_PROPERTIES_REQ_CMD------>|
+          |                        |                       |                               |
+          |                        |<-----------------HOST_CLIENT_PROPERTIES_RES_CMD-------|
+          |       Create new device on in ishtp bus        |                               |
+          |                        |                       |                               |
+          |                        |------------------HOST_CLIENT_PROPERTIES_REQ_CMD------>|
+          |                        |                       |                               |
+          |                        |<-----------------HOST_CLIENT_PROPERTIES_RES_CMD-------|
+          |       Create new device on in ishtp bus        |                               |
+          |                        |                       |                               |
+          |                        |--Repeat HOST_CLIENT_PROPERTIES_REQ_CMD-till last one--|
+          |                        |                       |                               |
+       probed()
+          |----ishtp_cl_connect--->|----------------- CLIENT_CONNECT_REQ_CMD-------------->|
+          |                        |                       |                               |
+          |                        |<----------------CLIENT_CONNECT_RES_CMD----------------|
+          |                        |                       |                               |
+          |register event callback |                       |                               |
+          |                        |                       |                               |
+          |ishtp_cl_send(
+          HOSTIF_DM_ENUM_DEVICES)  |----------fill ishtp_msg_hdr struct write to HW-----  >|
+          |                        |                       |                               |
+          |                        |                       |<-----IRQ(IPC_PROTOCOL_ISHTP---|
+          |                        |                       |                               |
+          |<--ENUM_DEVICE RSP------|                       |                               |
+          |                        |                       |                               |
+  for each enumerated device
+          |ishtp_cl_send(
+          HOSTIF_GET_HID_DESCRIPTOR|----------fill ishtp_msg_hdr struct write to HW-----  >|
+          |                        |                       |                               |
+          ...Response
+          |                        |                       |                               |
+  for each enumerated device
+          |ishtp_cl_send(
+       HOSTIF_GET_REPORT_DESCRIPTOR|--------------fill ishtp_msg_hdr struct write to HW-- >|
+          |                        |                       |                               |
+          |                        |                       |                               |
+   hid_allocate_device
+          |                        |                       |                               |
+   hid_add_device                  |                       |                               |
+          |                        |                       |                               |
+
+
+3.7 ISH Debugging
+-----------------
+
+To debug ISH, event tracing mechanism is used. To enable debug logs
+echo 1 > /sys/kernel/debug/tracing/events/intel_ish/enable
+cat sys/kernel/debug/tracing/trace
+
+3.8 ISH IIO sysfs Example on Lenovo thinkpad Yoga 260
+-----------------------------------------------------
+
+::
+
+  root@otcpl-ThinkPad-Yoga-260:~# tree -l /sys/bus/iio/devices/
+  /sys/bus/iio/devices/
+  ├── iio:device0 -> ../../../devices/0044:8086:22D8.0001/HID-SENSOR-200073.9.auto/iio:device0
+  │   ├── buffer
+  │   │   ├── enable
+  │   │   ├── length
+  │   │   └── watermark
+  ...
+  │   ├── in_accel_hysteresis
+  │   ├── in_accel_offset
+  │   ├── in_accel_sampling_frequency
+  │   ├── in_accel_scale
+  │   ├── in_accel_x_raw
+  │   ├── in_accel_y_raw
+  │   ├── in_accel_z_raw
+  │   ├── name
+  │   ├── scan_elements
+  │   │   ├── in_accel_x_en
+  │   │   ├── in_accel_x_index
+  │   │   ├── in_accel_x_type
+  │   │   ├── in_accel_y_en
+  │   │   ├── in_accel_y_index
+  │   │   ├── in_accel_y_type
+  │   │   ├── in_accel_z_en
+  │   │   ├── in_accel_z_index
+  │   │   └── in_accel_z_type
+  ...
+  │   │   ├── devices
+  │   │   │   │   ├── buffer
+  │   │   │   │   │   ├── enable
+  │   │   │   │   │   ├── length
+  │   │   │   │   │   └── watermark
+  │   │   │   │   ├── dev
+  │   │   │   │   ├── in_intensity_both_raw
+  │   │   │   │   ├── in_intensity_hysteresis
+  │   │   │   │   ├── in_intensity_offset
+  │   │   │   │   ├── in_intensity_sampling_frequency
+  │   │   │   │   ├── in_intensity_scale
+  │   │   │   │   ├── name
+  │   │   │   │   ├── scan_elements
+  │   │   │   │   │   ├── in_intensity_both_en
+  │   │   │   │   │   ├── in_intensity_both_index
+  │   │   │   │   │   └── in_intensity_both_type
+  │   │   │   │   ├── trigger
+  │   │   │   │   │   └── current_trigger
+  ...
+  │   │   │   │   ├── buffer
+  │   │   │   │   │   ├── enable
+  │   │   │   │   │   ├── length
+  │   │   │   │   │   └── watermark
+  │   │   │   │   ├── dev
+  │   │   │   │   ├── in_magn_hysteresis
+  │   │   │   │   ├── in_magn_offset
+  │   │   │   │   ├── in_magn_sampling_frequency
+  │   │   │   │   ├── in_magn_scale
+  │   │   │   │   ├── in_magn_x_raw
+  │   │   │   │   ├── in_magn_y_raw
+  │   │   │   │   ├── in_magn_z_raw
+  │   │   │   │   ├── in_rot_from_north_magnetic_tilt_comp_raw
+  │   │   │   │   ├── in_rot_hysteresis
+  │   │   │   │   ├── in_rot_offset
+  │   │   │   │   ├── in_rot_sampling_frequency
+  │   │   │   │   ├── in_rot_scale
+  │   │   │   │   ├── name
+  ...
+  │   │   │   │   ├── scan_elements
+  │   │   │   │   │   ├── in_magn_x_en
+  │   │   │   │   │   ├── in_magn_x_index
+  │   │   │   │   │   ├── in_magn_x_type
+  │   │   │   │   │   ├── in_magn_y_en
+  │   │   │   │   │   ├── in_magn_y_index
+  │   │   │   │   │   ├── in_magn_y_type
+  │   │   │   │   │   ├── in_magn_z_en
+  │   │   │   │   │   ├── in_magn_z_index
+  │   │   │   │   │   ├── in_magn_z_type
+  │   │   │   │   │   ├── in_rot_from_north_magnetic_tilt_comp_en
+  │   │   │   │   │   ├── in_rot_from_north_magnetic_tilt_comp_index
+  │   │   │   │   │   └── in_rot_from_north_magnetic_tilt_comp_type
+  │   │   │   │   ├── trigger
+  │   │   │   │   │   └── current_trigger
+  ...
+  │   │   │   │   ├── buffer
+  │   │   │   │   │   ├── enable
+  │   │   │   │   │   ├── length
+  │   │   │   │   │   └── watermark
+  │   │   │   │   ├── dev
+  │   │   │   │   ├── in_anglvel_hysteresis
+  │   │   │   │   ├── in_anglvel_offset
+  │   │   │   │   ├── in_anglvel_sampling_frequency
+  │   │   │   │   ├── in_anglvel_scale
+  │   │   │   │   ├── in_anglvel_x_raw
+  │   │   │   │   ├── in_anglvel_y_raw
+  │   │   │   │   ├── in_anglvel_z_raw
+  │   │   │   │   ├── name
+  │   │   │   │   ├── scan_elements
+  │   │   │   │   │   ├── in_anglvel_x_en
+  │   │   │   │   │   ├── in_anglvel_x_index
+  │   │   │   │   │   ├── in_anglvel_x_type
+  │   │   │   │   │   ├── in_anglvel_y_en
+  │   │   │   │   │   ├── in_anglvel_y_index
+  │   │   │   │   │   ├── in_anglvel_y_type
+  │   │   │   │   │   ├── in_anglvel_z_en
+  │   │   │   │   │   ├── in_anglvel_z_index
+  │   │   │   │   │   └── in_anglvel_z_type
+  │   │   │   │   ├── trigger
+  │   │   │   │   │   └── current_trigger
+  ...
+  │   │   │   │   ├── buffer
+  │   │   │   │   │   ├── enable
+  │   │   │   │   │   ├── length
+  │   │   │   │   │   └── watermark
+  │   │   │   │   ├── dev
+  │   │   │   │   ├── in_anglvel_hysteresis
+  │   │   │   │   ├── in_anglvel_offset
+  │   │   │   │   ├── in_anglvel_sampling_frequency
+  │   │   │   │   ├── in_anglvel_scale
+  │   │   │   │   ├── in_anglvel_x_raw
+  │   │   │   │   ├── in_anglvel_y_raw
+  │   │   │   │   ├── in_anglvel_z_raw
+  │   │   │   │   ├── name
+  │   │   │   │   ├── scan_elements
+  │   │   │   │   │   ├── in_anglvel_x_en
+  │   │   │   │   │   ├── in_anglvel_x_index
+  │   │   │   │   │   ├── in_anglvel_x_type
+  │   │   │   │   │   ├── in_anglvel_y_en
+  │   │   │   │   │   ├── in_anglvel_y_index
+  │   │   │   │   │   ├── in_anglvel_y_type
+  │   │   │   │   │   ├── in_anglvel_z_en
+  │   │   │   │   │   ├── in_anglvel_z_index
+  │   │   │   │   │   └── in_anglvel_z_type
+  │   │   │   │   ├── trigger
+  │   │   │   │   │   └── current_trigger
+  ...
diff --git a/Documentation/hid/intel-ish-hid.txt b/Documentation/hid/intel-ish-hid.txt
deleted file mode 100644
index d48b21c71ddd..000000000000
--- a/Documentation/hid/intel-ish-hid.txt
+++ /dev/null
@@ -1,454 +0,0 @@
-Intel Integrated Sensor Hub (ISH)
-===============================
-
-A sensor hub enables the ability to offload sensor polling and algorithm
-processing to a dedicated low power co-processor. This allows the core
-processor to go into low power modes more often, resulting in the increased
-battery life.
-
-There are many vendors providing external sensor hubs confirming to HID
-Sensor usage tables, and used in several tablets, 2 in 1 convertible laptops
-and embedded products. Linux had this support since Linux 3.9.
-
-Intel® introduced integrated sensor hubs as a part of the SoC starting from
-Cherry Trail and now supported on multiple generations of CPU packages. There
-are many commercial devices already shipped with Integrated Sensor Hubs (ISH).
-These ISH also comply to HID sensor specification, but the  difference is the
-transport protocol used for communication. The current external sensor hubs
-mainly use HID over i2C or USB. But ISH doesn't use either i2c or USB.
-
-1. Overview
-
-Using a analogy with a usbhid implementation, the ISH follows a similar model
-for a very high speed communication:
-
-	-----------------		----------------------
-	|    USB HID	|	-->	|    ISH HID	     |
-	-----------------		----------------------
-	-----------------		----------------------
-	|  USB protocol	|	-->	|    ISH Transport   |
-	-----------------		----------------------
-	-----------------		----------------------
-	|  EHCI/XHCI	|	-->	|    ISH IPC	     |
-	-----------------		----------------------
-	      PCI				 PCI
-	-----------------		----------------------
-        |Host controller|	-->	|    ISH processor   |
-	-----------------		----------------------
-	     USB Link
-	-----------------		----------------------
-	| USB End points|	-->	|    ISH Clients     |
-	-----------------		----------------------
-
-Like USB protocol provides a method for device enumeration, link management
-and user data encapsulation, the ISH also provides similar services. But it is
-very light weight tailored to manage and communicate with ISH client
-applications implemented in the firmware.
-
-The ISH allows multiple sensor management applications executing in the
-firmware. Like USB endpoints the messaging can be to/from a client. As part of
-enumeration process, these clients are identified. These clients can be simple
-HID sensor applications, sensor calibration application or senor firmware
-update application.
-
-The implementation model is similar, like USB bus, ISH transport is also
-implemented as a bus. Each client application executing in the ISH processor
-is registered as a device on this bus. The driver, which binds each device
-(ISH HID driver) identifies the device type and registers with the hid core.
-
-2. ISH Implementation: Block Diagram
-
-	 ---------------------------
-	|  User Space Applications  |
-	 ---------------------------
-
-----------------IIO ABI----------------
-	 --------------------------
-	|  IIO Sensor Drivers	  |
-	 --------------------------
-	 --------------------------
-	|	 IIO core	  |
-	 --------------------------
-	 --------------------------
-	|   HID Sensor Hub MFD	  |
-	 --------------------------
-	 --------------------------
-	|       HID Core	  |
-	 --------------------------
-	 --------------------------
-	|   HID over ISH Client   |
-	 --------------------------
-	 --------------------------
-	|   ISH Transport (ISHTP) |
-	 --------------------------
-	 --------------------------
-	|      IPC Drivers	  |
-	 --------------------------
-OS
-----------------   PCI -----------------
-Hardware + Firmware
-	 ----------------------------
-	| ISH Hardware/Firmware(FW) |
-	 ----------------------------
-
-3. High level processing in above blocks
-
-3.1 Hardware Interface
-
-The ISH is exposed as "Non-VGA unclassified PCI device" to the host. The PCI
-product and vendor IDs are changed from different generations of processors. So
-the source code which enumerate drivers needs to update from generation to
-generation.
-
-3.2 Inter Processor Communication (IPC) driver
-Location: drivers/hid/intel-ish-hid/ipc
-
-The IPC message used memory mapped I/O. The registers are defined in
-hw-ish-regs.h.
-
-3.2.1 IPC/FW message types
-
-There are two types of messages, one for management of link and other messages
-are to and from transport layers.
-
-TX and RX of Transport messages
-
-A set of memory mapped register offers support of multi byte messages TX and
-RX (E.g.IPC_REG_ISH2HOST_MSG, IPC_REG_HOST2ISH_MSG). The IPC layer maintains
-internal queues to sequence messages and send them in order to the FW.
-Optionally the caller can register handler to get notification of completion.
-A door bell mechanism is used in messaging to trigger processing in host and
-client firmware side. When ISH interrupt handler is called, the ISH2HOST
-doorbell register is used by host drivers to determine that the interrupt
-is for ISH.
-
-Each side has 32 32-bit message registers and a 32-bit doorbell. Doorbell
-register has the following format:
-Bits 0..6: fragment length (7 bits are used)
-Bits 10..13: encapsulated protocol
-Bits 16..19: management command (for IPC management protocol)
-Bit 31: doorbell trigger (signal H/W interrupt to the other side)
-Other bits are reserved, should be 0.
-
-3.2.2 Transport layer interface
-
-To abstract HW level IPC communication, a set of callbacks are registered.
-The transport layer uses them to send and receive messages.
-Refer to  struct ishtp_hw_ops for callbacks.
-
-3.3 ISH Transport layer
-Location: drivers/hid/intel-ish-hid/ishtp/
-
-3.3.1 A Generic Transport Layer
-
-The transport layer is a bi-directional protocol, which defines:
-- Set of commands to start, stop, connect, disconnect and flow control
-(ishtp/hbm.h) for details
-- A flow control mechanism to avoid buffer overflows
-
-This protocol resembles bus messages described in the following document:
-http://www.intel.com/content/dam/www/public/us/en/documents/technical-\
-specifications/dcmi-hi-1-0-spec.pdf "Chapter 7: Bus Message Layer"
-
-3.3.2 Connection and Flow Control Mechanism
-
-Each FW client and a protocol is identified by an UUID. In order to communicate
-to a FW client, a connection must be established using connect request and
-response bus messages. If successful, a pair (host_client_id and fw_client_id)
-will identify the connection.
-
-Once connection is established, peers send each other flow control bus messages
-independently. Every peer may send a message only if it has received a
-flow-control credit before. Once it sent a message, it may not send another one
-before receiving the next flow control credit.
-Either side can send disconnect request bus message to end communication. Also
-the link will be dropped if major FW reset occurs.
-
-3.3.3 Peer to Peer data transfer
-
-Peer to Peer data transfer can happen with or without using DMA. Depending on
-the sensor bandwidth requirement DMA can be enabled by using module parameter
-ishtp_use_dma under intel_ishtp.
-
-Each side (host and FW) manages its DMA transfer memory independently. When an
-ISHTP client from either host or FW side wants to send something, it decides
-whether to send over IPC or over DMA; for each transfer the decision is
-independent. The sending side sends DMA_XFER message when the message is in
-the respective host buffer (TX when host client sends, RX when FW client
-sends). The recipient of DMA message responds with DMA_XFER_ACK, indicating
-the sender that the memory region for that message may be reused.
-
-DMA initialization is started with host sending DMA_ALLOC_NOTIFY bus message
-(that includes RX buffer) and FW responds with DMA_ALLOC_NOTIFY_ACK.
-Additionally to DMA address communication, this sequence checks capabilities:
-if thw host doesn't support DMA, then it won't send DMA allocation, so FW can't
-send DMA; if FW doesn't support DMA then it won't respond with
-DMA_ALLOC_NOTIFY_ACK, in which case host will not use DMA transfers.
-Here ISH acts as busmaster DMA controller. Hence when host sends DMA_XFER,
-it's request to do host->ISH DMA transfer; when FW sends DMA_XFER, it means
-that it already did DMA and the message resides at host. Thus, DMA_XFER
-and DMA_XFER_ACK act as ownership indicators.
-
-At initial state all outgoing memory belongs to the sender (TX to host, RX to
-FW), DMA_XFER transfers ownership on the region that contains ISHTP message to
-the receiving side, DMA_XFER_ACK returns ownership to the sender. A sender
-needs not wait for previous DMA_XFER to be ack'ed, and may send another message
-as long as remaining continuous memory in its ownership is enough.
-In principle, multiple DMA_XFER and DMA_XFER_ACK messages may be sent at once
-(up to IPC MTU), thus allowing for interrupt throttling.
-Currently, ISH FW decides to send over DMA if ISHTP message is more than 3 IPC
-fragments and via IPC otherwise.
-
-3.3.4 Ring Buffers
-
-When a client initiate a connection, a ring or RX and TX buffers are allocated.
-The size of ring can be specified by the client. HID client set 16 and 32 for
-TX and RX buffers respectively. On send request from client, the data to be
-sent is copied to one of the send ring buffer and scheduled to be sent using
-bus message protocol. These buffers are required because the FW may have not
-have processed the last message and may not have enough flow control credits
-to send. Same thing holds true on receive side and flow control is required.
-
-3.3.5 Host Enumeration
-
-The host enumeration bus command allow discovery of clients present in the FW.
-There can be multiple sensor clients and clients for calibration function.
-
-To ease in implantation and allow independent driver handle each client
-this transport layer takes advantage of Linux Bus driver model. Each
-client is registered as device on the the transport bus (ishtp bus).
-
-Enumeration sequence of messages:
-- Host sends HOST_START_REQ_CMD, indicating that host ISHTP layer is up.
-- FW responds with HOST_START_RES_CMD
-- Host sends HOST_ENUM_REQ_CMD (enumerate FW clients)
-- FW responds with HOST_ENUM_RES_CMD that includes bitmap of available FW
-client IDs
-- For each FW ID found in that bitmap host sends
-HOST_CLIENT_PROPERTIES_REQ_CMD
-- FW responds with HOST_CLIENT_PROPERTIES_RES_CMD. Properties include UUID,
-max ISHTP message size, etc.
-- Once host received properties for that last discovered client, it considers
-ISHTP device fully functional (and allocates DMA buffers)
-
-3.4 HID over ISH Client
-Location: drivers/hid/intel-ish-hid
-
-The ISHTP client driver is responsible for:
-- enumerate HID devices under FW ISH client
-- Get Report descriptor
-- Register with HID core as a LL driver
-- Process Get/Set feature request
-- Get input reports
-
-3.5 HID Sensor Hub MFD and IIO sensor drivers
-
-The functionality in these drivers is the same as an external sensor hub.
-Refer to
-Documentation/hid/hid-sensor.txt for HID sensor
-Documentation/ABI/testing/sysfs-bus-iio for IIO ABIs to user space
-
-3.6 End to End HID transport Sequence Diagram
-
-HID-ISH-CLN			ISHTP			IPC				HW
-	|			|			|				|
-	|			|			|-----WAKE UP------------------>|
-	|			|			|				|
-	|			|			|-----HOST READY--------------->|
-	|			|			|				|
-	|			|			|<----MNG_RESET_NOTIFY_ACK----- |
-	|			|			|				|
-	|			|<----ISHTP_START------ |				|
-	|			|			|				|
-	|			|<-----------------HOST_START_RES_CMD-------------------|
-	|			|			|				|
-	|			|------------------QUERY_SUBSCRIBER-------------------->|
-	|			|			|				|
-	|			|------------------HOST_ENUM_REQ_CMD------------------->|
-	|			|			|				|
-	|			|<-----------------HOST_ENUM_RES_CMD--------------------|
-	|			|			|				|
-	|			|------------------HOST_CLIENT_PROPERTIES_REQ_CMD------>|
-	|			|			|				|
-	|			|<-----------------HOST_CLIENT_PROPERTIES_RES_CMD-------|
-	|	Create new device on in ishtp bus	|				|
-	|			|			|				|
-	|			|------------------HOST_CLIENT_PROPERTIES_REQ_CMD------>|
-	|			|			|				|
-	|			|<-----------------HOST_CLIENT_PROPERTIES_RES_CMD-------|
-	|	Create new device on in ishtp bus	|				|
-	|			|			|				|
-	|			|--Repeat HOST_CLIENT_PROPERTIES_REQ_CMD-till last one--|
-	|			|			|				|
-     probed()
-	|----ishtp_cl_connect-->|----------------- CLIENT_CONNECT_REQ_CMD-------------->|
-	|			|			|				|
-	|			|<----------------CLIENT_CONNECT_RES_CMD----------------|
-	|			|			|				|
-	|register event callback|			|				|
-	|			|			|				|
-	|ishtp_cl_send(
-	HOSTIF_DM_ENUM_DEVICES) |----------fill ishtp_msg_hdr struct write to HW-----  >|
-	|			|			|				|
-	|			|			|<-----IRQ(IPC_PROTOCOL_ISHTP---|
-	|			|			|				|
-	|<--ENUM_DEVICE RSP-----|			|				|
-	|			|			|				|
-for each enumerated device
-	|ishtp_cl_send(
-	HOSTIF_GET_HID_DESCRIPTOR |----------fill ishtp_msg_hdr struct write to HW---  >|
-	|			|			|				|
-	...Response
-	|			|			|				|
-for each enumerated device
-	|ishtp_cl_send(
-	HOSTIF_GET_REPORT_DESCRIPTOR |----------fill ishtp_msg_hdr struct write to HW- >|
-	|			|			|				|
-	|			|			|				|
- hid_allocate_device
-	|			|			|				|
- hid_add_device			|			|				|
-	|			|			|				|
-
-
-3.7 ISH Debugging
-
-To debug ISH, event tracing mechanism is used. To enable debug logs
-echo 1 > /sys/kernel/debug/tracing/events/intel_ish/enable
-cat sys/kernel/debug/tracing/trace
-
-3.8 ISH IIO sysfs Example on Lenovo thinkpad Yoga 260
-
-root@otcpl-ThinkPad-Yoga-260:~# tree -l /sys/bus/iio/devices/
-/sys/bus/iio/devices/
-├── iio:device0 -> ../../../devices/0044:8086:22D8.0001/HID-SENSOR-200073.9.auto/iio:device0
-│   ├── buffer
-│   │   ├── enable
-│   │   ├── length
-│   │   └── watermark
-...
-│   ├── in_accel_hysteresis
-│   ├── in_accel_offset
-│   ├── in_accel_sampling_frequency
-│   ├── in_accel_scale
-│   ├── in_accel_x_raw
-│   ├── in_accel_y_raw
-│   ├── in_accel_z_raw
-│   ├── name
-│   ├── scan_elements
-│   │   ├── in_accel_x_en
-│   │   ├── in_accel_x_index
-│   │   ├── in_accel_x_type
-│   │   ├── in_accel_y_en
-│   │   ├── in_accel_y_index
-│   │   ├── in_accel_y_type
-│   │   ├── in_accel_z_en
-│   │   ├── in_accel_z_index
-│   │   └── in_accel_z_type
-...
-│   │   ├── devices
-│   │   │   │   ├── buffer
-│   │   │   │   │   ├── enable
-│   │   │   │   │   ├── length
-│   │   │   │   │   └── watermark
-│   │   │   │   ├── dev
-│   │   │   │   ├── in_intensity_both_raw
-│   │   │   │   ├── in_intensity_hysteresis
-│   │   │   │   ├── in_intensity_offset
-│   │   │   │   ├── in_intensity_sampling_frequency
-│   │   │   │   ├── in_intensity_scale
-│   │   │   │   ├── name
-│   │   │   │   ├── scan_elements
-│   │   │   │   │   ├── in_intensity_both_en
-│   │   │   │   │   ├── in_intensity_both_index
-│   │   │   │   │   └── in_intensity_both_type
-│   │   │   │   ├── trigger
-│   │   │   │   │   └── current_trigger
-...
-│   │   │   │   ├── buffer
-│   │   │   │   │   ├── enable
-│   │   │   │   │   ├── length
-│   │   │   │   │   └── watermark
-│   │   │   │   ├── dev
-│   │   │   │   ├── in_magn_hysteresis
-│   │   │   │   ├── in_magn_offset
-│   │   │   │   ├── in_magn_sampling_frequency
-│   │   │   │   ├── in_magn_scale
-│   │   │   │   ├── in_magn_x_raw
-│   │   │   │   ├── in_magn_y_raw
-│   │   │   │   ├── in_magn_z_raw
-│   │   │   │   ├── in_rot_from_north_magnetic_tilt_comp_raw
-│   │   │   │   ├── in_rot_hysteresis
-│   │   │   │   ├── in_rot_offset
-│   │   │   │   ├── in_rot_sampling_frequency
-│   │   │   │   ├── in_rot_scale
-│   │   │   │   ├── name
-...
-│   │   │   │   ├── scan_elements
-│   │   │   │   │   ├── in_magn_x_en
-│   │   │   │   │   ├── in_magn_x_index
-│   │   │   │   │   ├── in_magn_x_type
-│   │   │   │   │   ├── in_magn_y_en
-│   │   │   │   │   ├── in_magn_y_index
-│   │   │   │   │   ├── in_magn_y_type
-│   │   │   │   │   ├── in_magn_z_en
-│   │   │   │   │   ├── in_magn_z_index
-│   │   │   │   │   ├── in_magn_z_type
-│   │   │   │   │   ├── in_rot_from_north_magnetic_tilt_comp_en
-│   │   │   │   │   ├── in_rot_from_north_magnetic_tilt_comp_index
-│   │   │   │   │   └── in_rot_from_north_magnetic_tilt_comp_type
-│   │   │   │   ├── trigger
-│   │   │   │   │   └── current_trigger
-...
-│   │   │   │   ├── buffer
-│   │   │   │   │   ├── enable
-│   │   │   │   │   ├── length
-│   │   │   │   │   └── watermark
-│   │   │   │   ├── dev
-│   │   │   │   ├── in_anglvel_hysteresis
-│   │   │   │   ├── in_anglvel_offset
-│   │   │   │   ├── in_anglvel_sampling_frequency
-│   │   │   │   ├── in_anglvel_scale
-│   │   │   │   ├── in_anglvel_x_raw
-│   │   │   │   ├── in_anglvel_y_raw
-│   │   │   │   ├── in_anglvel_z_raw
-│   │   │   │   ├── name
-│   │   │   │   ├── scan_elements
-│   │   │   │   │   ├── in_anglvel_x_en
-│   │   │   │   │   ├── in_anglvel_x_index
-│   │   │   │   │   ├── in_anglvel_x_type
-│   │   │   │   │   ├── in_anglvel_y_en
-│   │   │   │   │   ├── in_anglvel_y_index
-│   │   │   │   │   ├── in_anglvel_y_type
-│   │   │   │   │   ├── in_anglvel_z_en
-│   │   │   │   │   ├── in_anglvel_z_index
-│   │   │   │   │   └── in_anglvel_z_type
-│   │   │   │   ├── trigger
-│   │   │   │   │   └── current_trigger
-...
-│   │   │   │   ├── buffer
-│   │   │   │   │   ├── enable
-│   │   │   │   │   ├── length
-│   │   │   │   │   └── watermark
-│   │   │   │   ├── dev
-│   │   │   │   ├── in_anglvel_hysteresis
-│   │   │   │   ├── in_anglvel_offset
-│   │   │   │   ├── in_anglvel_sampling_frequency
-│   │   │   │   ├── in_anglvel_scale
-│   │   │   │   ├── in_anglvel_x_raw
-│   │   │   │   ├── in_anglvel_y_raw
-│   │   │   │   ├── in_anglvel_z_raw
-│   │   │   │   ├── name
-│   │   │   │   ├── scan_elements
-│   │   │   │   │   ├── in_anglvel_x_en
-│   │   │   │   │   ├── in_anglvel_x_index
-│   │   │   │   │   ├── in_anglvel_x_type
-│   │   │   │   │   ├── in_anglvel_y_en
-│   │   │   │   │   ├── in_anglvel_y_index
-│   │   │   │   │   ├── in_anglvel_y_type
-│   │   │   │   │   ├── in_anglvel_z_en
-│   │   │   │   │   ├── in_anglvel_z_index
-│   │   │   │   │   └── in_anglvel_z_type
-│   │   │   │   ├── trigger
-│   │   │   │   │   └── current_trigger
-...
diff --git a/Documentation/hid/uhid.txt b/Documentation/hid/uhid.rst
similarity index 94%
rename from Documentation/hid/uhid.txt
rename to Documentation/hid/uhid.rst
index 958fff945304..b18cb96c885f 100644
--- a/Documentation/hid/uhid.txt
+++ b/Documentation/hid/uhid.rst
@@ -1,5 +1,6 @@
-      UHID - User-space I/O driver support for HID subsystem
-     ========================================================
+======================================================
+UHID - User-space I/O driver support for HID subsystem
+======================================================
 
 UHID allows user-space to implement HID transport drivers. Please see
 hid-transport.txt for an introduction into HID transport drivers. This document
@@ -22,9 +23,9 @@ If a new device is detected by your HID I/O Driver and you want to register this
 device with the HID subsystem, then you need to open /dev/uhid once for each
 device you want to register. All further communication is done by read()'ing or
 write()'ing "struct uhid_event" objects. Non-blocking operations are supported
-by setting O_NONBLOCK.
+by setting O_NONBLOCK::
 
-struct uhid_event {
+  struct uhid_event {
         __u32 type;
         union {
                 struct uhid_create2_req create2;
@@ -32,7 +33,7 @@ struct uhid_event {
                 struct uhid_input2_req input2;
                 ...
         } u;
-};
+  };
 
 The "type" field contains the ID of the event. Depending on the ID different
 payloads are sent. You must not split a single event across multiple read()'s or
@@ -86,31 +87,31 @@ the request was handled successfully. O_NONBLOCK does not affect write() as
 writes are always handled immediately in a non-blocking fashion. Future requests
 might make use of O_NONBLOCK, though.
 
-  UHID_CREATE2:
+UHID_CREATE2:
   This creates the internal HID device. No I/O is possible until you send this
   event to the kernel. The payload is of type struct uhid_create2_req and
   contains information about your device. You can start I/O now.
 
-  UHID_DESTROY:
+UHID_DESTROY:
   This destroys the internal HID device. No further I/O will be accepted. There
   may still be pending messages that you can receive with read() but no further
   UHID_INPUT events can be sent to the kernel.
   You can create a new device by sending UHID_CREATE2 again. There is no need to
   reopen the character device.
 
-  UHID_INPUT2:
+UHID_INPUT2:
   You must send UHID_CREATE2 before sending input to the kernel! This event
   contains a data-payload. This is the raw data that you read from your device
   on the interrupt channel. The kernel will parse the HID reports.
 
-  UHID_GET_REPORT_REPLY:
+UHID_GET_REPORT_REPLY:
   If you receive a UHID_GET_REPORT request you must answer with this request.
   You  must copy the "id" field from the request into the answer. Set the "err"
   field to 0 if no error occurred or to EIO if an I/O error occurred.
   If "err" is 0 then you should fill the buffer of the answer with the results
   of the GET_REPORT request and set "size" correspondingly.
 
-  UHID_SET_REPORT_REPLY:
+UHID_SET_REPORT_REPLY:
   This is the SET_REPORT equivalent of UHID_GET_REPORT_REPLY. Unlike GET_REPORT,
   SET_REPORT never returns a data buffer, therefore, it's sufficient to set the
   "id" and "err" fields correctly.
@@ -120,16 +121,18 @@ read()
 read() will return a queued output report. No reaction is required to any of
 them but you should handle them according to your needs.
 
-  UHID_START:
+UHID_START:
   This is sent when the HID device is started. Consider this as an answer to
   UHID_CREATE2. This is always the first event that is sent. Note that this
   event might not be available immediately after write(UHID_CREATE2) returns.
   Device drivers might required delayed setups.
   This event contains a payload of type uhid_start_req. The "dev_flags" field
   describes special behaviors of a device. The following flags are defined:
-      UHID_DEV_NUMBERED_FEATURE_REPORTS:
-      UHID_DEV_NUMBERED_OUTPUT_REPORTS:
-      UHID_DEV_NUMBERED_INPUT_REPORTS:
+
+      - UHID_DEV_NUMBERED_FEATURE_REPORTS
+      - UHID_DEV_NUMBERED_OUTPUT_REPORTS
+      - UHID_DEV_NUMBERED_INPUT_REPORTS
+
           Each of these flags defines whether a given report-type uses numbered
           reports. If numbered reports are used for a type, all messages from
           the kernel already have the report-number as prefix. Otherwise, no
@@ -137,33 +140,35 @@ them but you should handle them according to your needs.
           For messages sent by user-space to the kernel, you must adjust the
           prefixes according to these flags.
 
-  UHID_STOP:
+UHID_STOP:
   This is sent when the HID device is stopped. Consider this as an answer to
   UHID_DESTROY.
+
   If you didn't destroy your device via UHID_DESTROY, but the kernel sends an
   UHID_STOP event, this should usually be ignored. It means that the kernel
   reloaded/changed the device driver loaded on your HID device (or some other
   maintenance actions happened).
+
   You can usually ignored any UHID_STOP events safely.
 
-  UHID_OPEN:
+UHID_OPEN:
   This is sent when the HID device is opened. That is, the data that the HID
   device provides is read by some other process. You may ignore this event but
   it is useful for power-management. As long as you haven't received this event
   there is actually no other process that reads your data so there is no need to
   send UHID_INPUT2 events to the kernel.
 
-  UHID_CLOSE:
+UHID_CLOSE:
   This is sent when there are no more processes which read the HID data. It is
   the counterpart of UHID_OPEN and you may as well ignore this event.
 
-  UHID_OUTPUT:
+UHID_OUTPUT:
   This is sent if the HID device driver wants to send raw data to the I/O
   device on the interrupt channel. You should read the payload and forward it to
   the device. The payload is of type "struct uhid_output_req".
   This may be received even though you haven't received UHID_OPEN, yet.
 
-  UHID_GET_REPORT:
+UHID_GET_REPORT:
   This event is sent if the kernel driver wants to perform a GET_REPORT request
   on the control channeld as described in the HID specs. The report-type and
   report-number are available in the payload.
@@ -177,11 +182,12 @@ them but you should handle them according to your needs.
   timed out, the kernel will ignore the response silently. The "id" field is
   never re-used, so conflicts cannot happen.
 
-  UHID_SET_REPORT:
+UHID_SET_REPORT:
   This is the SET_REPORT equivalent of UHID_GET_REPORT. On receipt, you shall
   send a SET_REPORT request to your hid device. Once it replies, you must tell
   the kernel about it via UHID_SET_REPORT_REPLY.
   The same restrictions as for UHID_GET_REPORT apply.
 
 ----------------------------------------------------
+
 Written 2012, David Herrmann <dh.herrmann@gmail.com>
diff --git a/Documentation/input/input.rst b/Documentation/input/input.rst
index 47f86a4bf16c..0eb61e67a7b7 100644
--- a/Documentation/input/input.rst
+++ b/Documentation/input/input.rst
@@ -188,7 +188,7 @@ LCDs and many other purposes.
 
 The monitor and speaker controls should be easy to add to the hid/input
 interface, but for the UPSs and LCDs it doesn't make much sense. For this,
-the hiddev interface was designed. See Documentation/hid/hiddev.txt
+the hiddev interface was designed. See Documentation/hid/hiddev.rst
 for more information about it.
 
 The usage of the usbhid module is very simple, it takes no parameters,
diff --git a/MAINTAINERS b/MAINTAINERS
index 66bcec263dbf..4e1e598a32d9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16165,7 +16165,7 @@ M:	Benjamin Tissoires <benjamin.tissoires@redhat.com>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git
 S:	Maintained
-F:	Documentation/hid/hiddev.txt
+F:	Documentation/hid/hiddev.rst
 F:	drivers/hid/usbhid/
 
 USB INTEL XHCI ROLE MUX DRIVER
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 60/79] docs: ia64: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (55 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 59/79] docs: hid: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 61/79] docs: leds: " Mauro Carvalho Chehab
                     ` (20 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Pat Gefre, Ard Biesheuvel, Tony Luck,
	Fenghua Yu, linux-ia64, linux-efi

Rename the ia64 documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

There are two upper case file names. Rename them to
lower case, as we're working to avoid upper case file
names at Documentation.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../ia64/{aliasing.txt => aliasing.rst}       |  71 ++--
 Documentation/ia64/{efirtc.txt => efirtc.rst} |  86 +++--
 .../ia64/{err_inject.txt => err_inject.rst}   | 347 +++++++++---------
 Documentation/ia64/{fsys.txt => fsys.rst}     | 127 ++++---
 Documentation/ia64/{README => ia64.rst}       |  26 +-
 Documentation/ia64/index.rst                  |  18 +
 .../ia64/{IRQ-redir.txt => irq-redir.rst}     |  30 +-
 Documentation/ia64/{mca.txt => mca.rst}       |  10 +-
 Documentation/ia64/{serial.txt => serial.rst} |  36 +-
 Documentation/ia64/xen.rst                    | 206 +++++++++++
 Documentation/ia64/xen.txt                    | 183 ---------
 MAINTAINERS                                   |   2 +-
 arch/ia64/kernel/efi.c                        |   2 +-
 arch/ia64/kernel/fsys.S                       |   2 +-
 arch/ia64/mm/ioremap.c                        |   2 +-
 arch/ia64/pci/pci.c                           |   2 +-
 16 files changed, 642 insertions(+), 508 deletions(-)
 rename Documentation/ia64/{aliasing.txt => aliasing.rst} (84%)
 rename Documentation/ia64/{efirtc.txt => efirtc.rst} (76%)
 rename Documentation/ia64/{err_inject.txt => err_inject.rst} (82%)
 rename Documentation/ia64/{fsys.txt => fsys.rst} (76%)
 rename Documentation/ia64/{README => ia64.rst} (61%)
 create mode 100644 Documentation/ia64/index.rst
 rename Documentation/ia64/{IRQ-redir.txt => irq-redir.rst} (86%)
 rename Documentation/ia64/{mca.txt => mca.rst} (96%)
 rename Documentation/ia64/{serial.txt => serial.rst} (87%)
 create mode 100644 Documentation/ia64/xen.rst
 delete mode 100644 Documentation/ia64/xen.txt

diff --git a/Documentation/ia64/aliasing.txt b/Documentation/ia64/aliasing.rst
similarity index 84%
rename from Documentation/ia64/aliasing.txt
rename to Documentation/ia64/aliasing.rst
index 5a4dea6abebd..b9c97189072a 100644
--- a/Documentation/ia64/aliasing.txt
+++ b/Documentation/ia64/aliasing.rst
@@ -1,20 +1,25 @@
-	         MEMORY ATTRIBUTE ALIASING ON IA-64
+==================================
+Memory Attribute Aliasing on IA-64
+==================================
 
-			   Bjorn Helgaas
-		       <bjorn.helgaas@hp.com>
-			    May 4, 2006
+Bjorn Helgaas <bjorn.helgaas@hp.com>
 
+May 4, 2006
 
-MEMORY ATTRIBUTES
+
+Memory Attributes
+=================
 
     Itanium supports several attributes for virtual memory references.
     The attribute is part of the virtual translation, i.e., it is
     contained in the TLB entry.  The ones of most interest to the Linux
     kernel are:
 
-	WB		Write-back (cacheable)
+	==		======================
+        WB		Write-back (cacheable)
 	UC		Uncacheable
 	WC		Write-coalescing
+	==		======================
 
     System memory typically uses the WB attribute.  The UC attribute is
     used for memory-mapped I/O devices.  The WC attribute is uncacheable
@@ -29,7 +34,8 @@ MEMORY ATTRIBUTES
     support either WB or UC access to main memory, while others support
     only WB access.
 
-MEMORY MAP
+Memory Map
+==========
 
     Platform firmware describes the physical memory map and the
     supported attributes for each region.  At boot-time, the kernel uses
@@ -55,7 +61,8 @@ MEMORY MAP
     The efi_memmap table is preserved unmodified because the original
     boot-time information is required for kexec.
 
-KERNEL IDENTITY MAPPINGS
+Kernel Identify Mappings
+========================
 
     Linux/ia64 identity mappings are done with large pages, currently
     either 16MB or 64MB, referred to as "granules."  Cacheable mappings
@@ -74,17 +81,20 @@ KERNEL IDENTITY MAPPINGS
     are only partially populated, or populated with a combination of UC
     and WB regions.
 
-USER MAPPINGS
+User Mappings
+=============
 
     User mappings are typically done with 16K or 64K pages.  The smaller
     page size allows more flexibility because only 16K or 64K has to be
     homogeneous with respect to memory attributes.
 
-POTENTIAL ATTRIBUTE ALIASING CASES
+Potential Attribute Aliasing Cases
+==================================
 
     There are several ways the kernel creates new mappings:
 
-    mmap of /dev/mem
+mmap of /dev/mem
+----------------
 
 	This uses remap_pfn_range(), which creates user mappings.  These
 	mappings may be either WB or UC.  If the region being mapped
@@ -98,7 +108,8 @@ POTENTIAL ATTRIBUTE ALIASING CASES
 	Since the EFI memory map does not describe MMIO on some
 	machines, this should use an uncacheable mapping as a fallback.
 
-    mmap of /sys/class/pci_bus/.../legacy_mem
+mmap of /sys/class/pci_bus/.../legacy_mem
+-----------------------------------------
 
 	This is very similar to mmap of /dev/mem, except that legacy_mem
 	only allows mmap of the one megabyte "legacy MMIO" area for a
@@ -112,7 +123,8 @@ POTENTIAL ATTRIBUTE ALIASING CASES
 
 	The /dev/mem mmap constraints apply.
 
-    mmap of /proc/bus/pci/.../??.?
+mmap of /proc/bus/pci/.../??.?
+------------------------------
 
     	This is an MMIO mmap of PCI functions, which additionally may or
 	may not be requested as using the WC attribute.
@@ -124,7 +136,8 @@ POTENTIAL ATTRIBUTE ALIASING CASES
 	Otherwise, the user mapping must use the same attribute as the
 	kernel mapping.
 
-    read/write of /dev/mem
+read/write of /dev/mem
+----------------------
 
 	This uses copy_from_user(), which implicitly uses a kernel
 	identity mapping.  This is obviously safe for things in
@@ -138,7 +151,8 @@ POTENTIAL ATTRIBUTE ALIASING CASES
 	eight-byte accesses, and the copy_from_user() path doesn't allow
 	any control over the access size, so this would be dangerous.
 
-    ioremap()
+ioremap()
+---------
 
 	This returns a mapping for use inside the kernel.
 
@@ -155,9 +169,11 @@ POTENTIAL ATTRIBUTE ALIASING CASES
 
 	Failing all of the above, we have to fall back to a UC mapping.
 
-PAST PROBLEM CASES
+Past Problem Cases
+==================
 
-    mmap of various MMIO regions from /dev/mem by "X" on Intel platforms
+mmap of various MMIO regions from /dev/mem by "X" on Intel platforms
+--------------------------------------------------------------------
 
       The EFI memory map may not report these MMIO regions.
 
@@ -166,12 +182,16 @@ PAST PROBLEM CASES
       succeed.  It may create either WB or UC user mappings, depending
       on whether the region is in kern_memmap or the EFI memory map.
 
-    mmap of 0x0-0x9FFFF /dev/mem by "hwinfo" on HP sx1000 with VGA enabled
+mmap of 0x0-0x9FFFF /dev/mem by "hwinfo" on HP sx1000 with VGA enabled
+----------------------------------------------------------------------
 
       The EFI memory map reports the following attributes:
+
+        =============== ======= ==================
         0x00000-0x9FFFF WB only
         0xA0000-0xBFFFF UC only (VGA frame buffer)
         0xC0000-0xFFFFF WB only
+        =============== ======= ==================
 
       This mmap is done with user pages, not kernel identity mappings,
       so it is safe to use WB mappings.
@@ -182,7 +202,8 @@ PAST PROBLEM CASES
       never generate an uncacheable reference to the WB-only areas unless
       the driver explicitly touches them.
 
-    mmap of 0x0-0xFFFFF legacy_mem by "X"
+mmap of 0x0-0xFFFFF legacy_mem by "X"
+-------------------------------------
 
       If the EFI memory map reports that the entire range supports the
       same attributes, we can allow the mmap (and we will prefer WB if
@@ -197,15 +218,18 @@ PAST PROBLEM CASES
       that doesn't report the VGA frame buffer at all), we should fail the
       mmap and force the user to map just the specific region of interest.
 
-    mmap of 0xA0000-0xBFFFF legacy_mem by "X" on HP sx1000 with VGA disabled
+mmap of 0xA0000-0xBFFFF legacy_mem by "X" on HP sx1000 with VGA disabled
+------------------------------------------------------------------------
+
+      The EFI memory map reports the following attributes::
 
-      The EFI memory map reports the following attributes:
         0x00000-0xFFFFF WB only (no VGA MMIO hole)
 
       This is a special case of the previous case, and the mmap should
       fail for the same reason as above.
 
-    read of /sys/devices/.../rom
+read of /sys/devices/.../rom
+----------------------------
 
       For VGA devices, this may cause an ioremap() of 0xC0000.  This
       used to be done with a UC mapping, because the VGA frame buffer
@@ -215,7 +239,8 @@ PAST PROBLEM CASES
       We should use WB page table mappings to avoid covering the VGA
       frame buffer.
 
-NOTES
+Notes
+=====
 
     [1] SDM rev 2.2, vol 2, sec 4.4.1.
     [2] SDM rev 2.2, vol 2, sec 4.4.6.
diff --git a/Documentation/ia64/efirtc.txt b/Documentation/ia64/efirtc.rst
similarity index 76%
rename from Documentation/ia64/efirtc.txt
rename to Documentation/ia64/efirtc.rst
index 057e6bebda8f..e4bc856e6875 100644
--- a/Documentation/ia64/efirtc.txt
+++ b/Documentation/ia64/efirtc.rst
@@ -1,9 +1,13 @@
+==========================
 EFI Real Time Clock driver
--------------------------------
+==========================
+
 S. Eranian <eranian@hpl.hp.com>
+
 March 2000
 
-I/ Introduction
+1. Introduction
+===============
 
 This document describes the efirtc.c driver has provided for
 the IA-64 platform. 
@@ -16,7 +20,8 @@ SetTime(), GetWakeupTime(), SetWakeupTime() which are all supported by this
 driver. We describe those calls as well the design of the driver in the
 following sections.
 
-II/ Design Decisions
+2. Design Decisions
+===================
 
 The original ideas was to provide a very simple driver to get access to, 
 at first, the time of day service. This is required in order to access, in a 
@@ -50,45 +55,53 @@ we have created the include/linux/rtc.h header file to contain only the
 in include/linux/mc146818rtc.h.
 
  
-III/ Time of day service
+3. Time of day service
+======================
 
 The part of the driver gives access to the time of day service of EFI.
 Two ioctl()s, compatible with the legacy RTC calls:
 
-	Read the CMOS clock: ioctl(d, RTC_RD_TIME, &rtc);
+	Read the CMOS clock::
 
-	Write the CMOS clock: ioctl(d, RTC_SET_TIME, &rtc);
+		ioctl(d, RTC_RD_TIME, &rtc);
+
+	Write the CMOS clock::
+
+		ioctl(d, RTC_SET_TIME, &rtc);
 
 The rtc is a pointer to a data structure defined in rtc.h which is close
-to a struct tm:
+to a struct tm::
 
-struct rtc_time {
-        int tm_sec;
-        int tm_min;
-        int tm_hour;
-        int tm_mday;
-        int tm_mon;
-        int tm_year;
-        int tm_wday;
-        int tm_yday;
-        int tm_isdst;
-};
+  struct rtc_time {
+          int tm_sec;
+          int tm_min;
+          int tm_hour;
+          int tm_mday;
+          int tm_mon;
+          int tm_year;
+          int tm_wday;
+          int tm_yday;
+          int tm_isdst;
+  };
 
 The driver takes care of converting back an forth between the EFI time and
 this format.
 
 Those two ioctl()s can be exercised with the hwclock command:
 
-For reading:
-# /sbin/hwclock --show
-Mon Mar  6 15:32:32 2000  -0.910248 seconds
+For reading::
 
-For setting:
-# /sbin/hwclock --systohc
+	# /sbin/hwclock --show
+	Mon Mar  6 15:32:32 2000  -0.910248 seconds
+
+For setting::
+
+	# /sbin/hwclock --systohc
 
 Root privileges are required to be able to set the time of day.
 
-IV/ Wakeup Alarm service
+4. Wakeup Alarm service
+=======================
 
 EFI provides an API by which one can program when a machine should wakeup,
 i.e. reboot. This is very different from the alarm provided by the legacy
@@ -98,22 +111,24 @@ introduced 2 news ioctl()s to the interface of an RTC.
 
 We have added 2 new ioctl()s that are specific to the EFI driver:
 
-	Read the current state of the alarm
-	ioctl(d, RTC_WKLAM_RD, &wkt)
+	Read the current state of the alarm::
 
-	Set the alarm or change its status
-	ioctl(d, RTC_WKALM_SET, &wkt)
+		ioctl(d, RTC_WKLAM_RD, &wkt)
+
+	Set the alarm or change its status::
+
+		ioctl(d, RTC_WKALM_SET, &wkt)
 
 The wkt structure encapsulates a struct rtc_time + 2 extra fields to get 
-status information:
+status information::
 	
-struct rtc_wkalrm {
+  struct rtc_wkalrm {
 
-        unsigned char enabled; /* =1 if alarm is enabled */
-        unsigned char pending; /* =1 if alarm is pending  */
+          unsigned char enabled; /* =1 if alarm is enabled */
+          unsigned char pending; /* =1 if alarm is pending  */
 
-        struct rtc_time time;
-} 
+          struct rtc_time time;
+  }
 
 As of today, none of the existing user-level apps supports this feature.
 However writing such a program should be hard by simply using those two 
@@ -121,7 +136,8 @@ ioctl().
 
 Root privileges are required to be able to set the alarm.
 
-V/ References.
+5. References
+=============
 
 Checkout the following Web site for more information on EFI:
 
diff --git a/Documentation/ia64/err_inject.txt b/Documentation/ia64/err_inject.rst
similarity index 82%
rename from Documentation/ia64/err_inject.txt
rename to Documentation/ia64/err_inject.rst
index 9f651c181429..b482a055095b 100644
--- a/Documentation/ia64/err_inject.txt
+++ b/Documentation/ia64/err_inject.rst
@@ -1,4 +1,4 @@
-
+========================================
 IPF Machine Check (MC) error inject tool
 ========================================
 
@@ -32,94 +32,94 @@ Errata: Itanium 2 Processors Specification Update lists some errata against
 the pal_mc_error_inject PAL procedure. The following err.conf has been tested
 on latest Montecito PAL.
 
-err.conf:
+err.conf::
 
-#This is configuration file for err_inject_tool.
-#The format of the each line is:
-#cpu, loop, interval, err_type_info, err_struct_info, err_data_buffer
-#where
-#	cpu: logical cpu number the error will be inject in.
-#	loop: times the error will be injected.
-#	interval: In second. every so often one error is injected.
-#	err_type_info, err_struct_info: PAL parameters.
-#
-#Note: All values are hex w/o or w/ 0x prefix.
+  #This is configuration file for err_inject_tool.
+  #The format of the each line is:
+  #cpu, loop, interval, err_type_info, err_struct_info, err_data_buffer
+  #where
+  #	cpu: logical cpu number the error will be inject in.
+  #	loop: times the error will be injected.
+  #	interval: In second. every so often one error is injected.
+  #	err_type_info, err_struct_info: PAL parameters.
+  #
+  #Note: All values are hex w/o or w/ 0x prefix.
 
 
-#On cpu2, inject only total 0x10 errors, interval 5 seconds
-#corrected, data cache, hier-2, physical addr(assigned by tool code).
-#working on Montecito latest PAL.
-2, 10, 5, 4101, 95
+  #On cpu2, inject only total 0x10 errors, interval 5 seconds
+  #corrected, data cache, hier-2, physical addr(assigned by tool code).
+  #working on Montecito latest PAL.
+  2, 10, 5, 4101, 95
 
-#On cpu4, inject and consume total 0x10 errors, interval 5 seconds
-#corrected, data cache, hier-2, physical addr(assigned by tool code).
-#working on Montecito latest PAL.
-4, 10, 5, 4109, 95
+  #On cpu4, inject and consume total 0x10 errors, interval 5 seconds
+  #corrected, data cache, hier-2, physical addr(assigned by tool code).
+  #working on Montecito latest PAL.
+  4, 10, 5, 4109, 95
 
-#On cpu15, inject and consume total 0x10 errors, interval 5 seconds
-#recoverable, DTR0, hier-2.
-#working on Montecito latest PAL.
-0xf, 0x10, 5, 4249, 15
+  #On cpu15, inject and consume total 0x10 errors, interval 5 seconds
+  #recoverable, DTR0, hier-2.
+  #working on Montecito latest PAL.
+  0xf, 0x10, 5, 4249, 15
 
 The sample application source code:
 
-err_injection_tool.c:
+err_injection_tool.c::
 
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Copyright (C) 2006 Intel Co
- *	Fenghua Yu <fenghua.yu@intel.com>
- *
- */
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <sched.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <errno.h>
-#include <time.h>
-#include <sys/ipc.h>
-#include <sys/sem.h>
-#include <sys/wait.h>
-#include <sys/mman.h>
-#include <sys/shm.h>
+  /*
+   * This program is free software; you can redistribute it and/or modify
+   * it under the terms of the GNU General Public License as published by
+   * the Free Software Foundation; either version 2 of the License, or
+   * (at your option) any later version.
+   *
+   * This program is distributed in the hope that it will be useful, but
+   * WITHOUT ANY WARRANTY; without even the implied warranty of
+   * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+   * NON INFRINGEMENT.  See the GNU General Public License for more
+   * details.
+   *
+   * You should have received a copy of the GNU General Public License
+   * along with this program; if not, write to the Free Software
+   * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+   *
+   * Copyright (C) 2006 Intel Co
+   *	Fenghua Yu <fenghua.yu@intel.com>
+   *
+   */
+  #include <sys/types.h>
+  #include <sys/stat.h>
+  #include <fcntl.h>
+  #include <stdio.h>
+  #include <sched.h>
+  #include <unistd.h>
+  #include <stdlib.h>
+  #include <stdarg.h>
+  #include <string.h>
+  #include <errno.h>
+  #include <time.h>
+  #include <sys/ipc.h>
+  #include <sys/sem.h>
+  #include <sys/wait.h>
+  #include <sys/mman.h>
+  #include <sys/shm.h>
 
-#define MAX_FN_SIZE 		256
-#define MAX_BUF_SIZE 		256
-#define DATA_BUF_SIZE 		256
-#define NR_CPUS 		512
-#define MAX_TASK_NUM		2048
-#define MIN_INTERVAL		5	// seconds
-#define	ERR_DATA_BUFFER_SIZE 	3	// Three 8-byte.
-#define PARA_FIELD_NUM		5
-#define MASK_SIZE		(NR_CPUS/64)
-#define PATH_FORMAT "/sys/devices/system/cpu/cpu%d/err_inject/"
+  #define MAX_FN_SIZE 		256
+  #define MAX_BUF_SIZE 		256
+  #define DATA_BUF_SIZE 		256
+  #define NR_CPUS 		512
+  #define MAX_TASK_NUM		2048
+  #define MIN_INTERVAL		5	// seconds
+  #define	ERR_DATA_BUFFER_SIZE 	3	// Three 8-byte.
+  #define PARA_FIELD_NUM		5
+  #define MASK_SIZE		(NR_CPUS/64)
+  #define PATH_FORMAT "/sys/devices/system/cpu/cpu%d/err_inject/"
 
-int sched_setaffinity(pid_t pid, unsigned int len, unsigned long *mask);
+  int sched_setaffinity(pid_t pid, unsigned int len, unsigned long *mask);
 
-int verbose;
-#define vbprintf if (verbose) printf
+  int verbose;
+  #define vbprintf if (verbose) printf
 
-int log_info(int cpu, const char *fmt, ...)
-{
+  int log_info(int cpu, const char *fmt, ...)
+  {
 	FILE *log;
 	char fn[MAX_FN_SIZE];
 	char buf[MAX_BUF_SIZE];
@@ -142,12 +142,12 @@ int log_info(int cpu, const char *fmt, ...)
 	fclose(log);
 
 	return 0;
-}
+  }
 
-typedef unsigned long u64;
-typedef unsigned int  u32;
+  typedef unsigned long u64;
+  typedef unsigned int  u32;
 
-typedef union err_type_info_u {
+  typedef union err_type_info_u {
 	struct {
 		u64	mode		: 3,	/* 0-2 */
 			err_inj		: 3,	/* 3-5 */
@@ -157,9 +157,9 @@ typedef union err_type_info_u {
 			reserved	: 48;	/* 16-63 */
 	} err_type_info_u;
 	u64	err_type_info;
-} err_type_info_t;
+  } err_type_info_t;
 
-typedef union err_struct_info_u {
+  typedef union err_struct_info_u {
 	struct {
 		u64	siv		: 1,	/* 0	 */
 			c_t		: 2,	/* 1-2	 */
@@ -197,9 +197,9 @@ typedef union err_struct_info_u {
 		u64	reserved;
 	} err_struct_info_bus_processor_interconnect;
 	u64	err_struct_info;
-} err_struct_info_t;
+  } err_struct_info_t;
 
-typedef union err_data_buffer_u {
+  typedef union err_data_buffer_u {
 	struct {
 		u64	trigger_addr;		/* 0-63		*/
 		u64	inj_addr;		/* 64-127 	*/
@@ -221,9 +221,9 @@ typedef union err_data_buffer_u {
 		u64	reserved;		/* 0-63		*/
 	} err_data_buffer_bus_processor_interconnect;
 	u64 err_data_buffer[ERR_DATA_BUFFER_SIZE];
-} err_data_buffer_t;
+  } err_data_buffer_t;
 
-typedef union capabilities_u {
+  typedef union capabilities_u {
 	struct {
 		u64	i		: 1,
 			d		: 1,
@@ -276,9 +276,9 @@ typedef union capabilities_u {
 	struct {
 		u64	reserved;
 	} capabilities_bus_processor_interconnect;
-} capabilities_t;
+  } capabilities_t;
 
-typedef struct resources_s {
+  typedef struct resources_s {
 	u64	ibr0		: 1,
 		ibr2		: 1,
 		ibr4		: 1,
@@ -288,24 +288,24 @@ typedef struct resources_s {
 		dbr4		: 1,
 		dbr6		: 1,
 		reserved	: 48;
-} resources_t;
+  } resources_t;
 
 
-long get_page_size(void)
-{
+  long get_page_size(void)
+  {
 	long page_size=sysconf(_SC_PAGESIZE);
 	return page_size;
-}
+  }
 
-#define PAGE_SIZE (get_page_size()==-1?0x4000:get_page_size())
-#define SHM_SIZE (2*PAGE_SIZE*NR_CPUS)
-#define SHM_VA 0x2000000100000000
+  #define PAGE_SIZE (get_page_size()==-1?0x4000:get_page_size())
+  #define SHM_SIZE (2*PAGE_SIZE*NR_CPUS)
+  #define SHM_VA 0x2000000100000000
 
-int shmid;
-void *shmaddr;
+  int shmid;
+  void *shmaddr;
 
-int create_shm(void)
-{
+  int create_shm(void)
+  {
 	key_t key;
 	char fn[MAX_FN_SIZE];
 
@@ -343,34 +343,34 @@ int create_shm(void)
 	mlock(shmaddr, SHM_SIZE);
 
 	return 0;
-}
+  }
 
-int free_shm()
-{
+  int free_shm()
+  {
 	munlock(shmaddr, SHM_SIZE);
-        shmdt(shmaddr);
+          shmdt(shmaddr);
 	semctl(shmid, 0, IPC_RMID);
 
 	return 0;
-}
+  }
 
-#ifdef _SEM_SEMUN_UNDEFINED
-union semun
-{
+  #ifdef _SEM_SEMUN_UNDEFINED
+  union semun
+  {
 	int val;
 	struct semid_ds *buf;
 	unsigned short int *array;
 	struct seminfo *__buf;
-};
-#endif
+  };
+  #endif
 
-u32 mode=1; /* 1: physical mode; 2: virtual mode. */
-int one_lock=1;
-key_t key[NR_CPUS];
-int semid[NR_CPUS];
+  u32 mode=1; /* 1: physical mode; 2: virtual mode. */
+  int one_lock=1;
+  key_t key[NR_CPUS];
+  int semid[NR_CPUS];
 
-int create_sem(int cpu)
-{
+  int create_sem(int cpu)
+  {
 	union semun arg;
 	char fn[MAX_FN_SIZE];
 	int sid;
@@ -407,37 +407,37 @@ int create_sem(int cpu)
 	}
 
 	return 0;
-}
+  }
 
-static int lock(int cpu)
-{
+  static int lock(int cpu)
+  {
 	struct sembuf lock;
 
 	lock.sem_num = cpu;
 	lock.sem_op = 1;
 	semop(semid[cpu], &lock, 1);
 
-        return 0;
-}
+          return 0;
+  }
 
-static int unlock(int cpu)
-{
+  static int unlock(int cpu)
+  {
 	struct sembuf unlock;
 
 	unlock.sem_num = cpu;
 	unlock.sem_op = -1;
 	semop(semid[cpu], &unlock, 1);
 
-        return 0;
-}
+          return 0;
+  }
 
-void free_sem(int cpu)
-{
+  void free_sem(int cpu)
+  {
 	semctl(semid[cpu], 0, IPC_RMID);
-}
+  }
 
-int wr_multi(char *fn, unsigned long *data, int size)
-{
+  int wr_multi(char *fn, unsigned long *data, int size)
+  {
 	int fd;
 	char buf[MAX_BUF_SIZE];
 	int ret;
@@ -459,15 +459,15 @@ int wr_multi(char *fn, unsigned long *data, int size)
 	ret=write(fd, buf, sizeof(buf));
 	close(fd);
 	return ret;
-}
+  }
 
-int wr(char *fn, unsigned long data)
-{
+  int wr(char *fn, unsigned long data)
+  {
 	return wr_multi(fn, &data, 1);
-}
+  }
 
-int rd(char *fn, unsigned long *data)
-{
+  int rd(char *fn, unsigned long *data)
+  {
 	int fd;
 	char buf[MAX_BUF_SIZE];
 
@@ -480,10 +480,10 @@ int rd(char *fn, unsigned long *data)
 	*data=strtoul(buf, NULL, 16);
 	close(fd);
 	return 0;
-}
+  }
 
-int rd_status(char *path, int *status)
-{
+  int rd_status(char *path, int *status)
+  {
 	char fn[MAX_FN_SIZE];
 	sprintf(fn, "%s/status", path);
 	if (rd(fn, (u64*)status)<0) {
@@ -492,10 +492,10 @@ int rd_status(char *path, int *status)
 	}
 
 	return 0;
-}
+  }
 
-int rd_capabilities(char *path, u64 *capabilities)
-{
+  int rd_capabilities(char *path, u64 *capabilities)
+  {
 	char fn[MAX_FN_SIZE];
 	sprintf(fn, "%s/capabilities", path);
 	if (rd(fn, capabilities)<0) {
@@ -504,10 +504,10 @@ int rd_capabilities(char *path, u64 *capabilities)
 	}
 
 	return 0;
-}
+  }
 
-int rd_all(char *path)
-{
+  int rd_all(char *path)
+  {
 	unsigned long err_type_info, err_struct_info, err_data_buffer;
 	int status;
 	unsigned long capabilities, resources;
@@ -556,11 +556,11 @@ int rd_all(char *path)
 	printf("resources=%lx\n", resources);
 
 	return 0;
-}
+  }
 
-int query_capabilities(char *path, err_type_info_t err_type_info,
+  int query_capabilities(char *path, err_type_info_t err_type_info,
 			u64 *capabilities)
-{
+  {
 	char fn[MAX_FN_SIZE];
 	err_struct_info_t err_struct_info;
 	err_data_buffer_t err_data_buffer;
@@ -583,10 +583,10 @@ int query_capabilities(char *path, err_type_info_t err_type_info,
 		return -1;
 
 	return 0;
-}
+  }
 
-int query_all_capabilities()
-{
+  int query_all_capabilities()
+  {
 	int status;
 	err_type_info_t err_type_info;
 	int err_sev, err_struct, struct_hier;
@@ -629,12 +629,12 @@ int query_all_capabilities()
 	}
 
 	return 0;
-}
+  }
 
-int err_inject(int cpu, char *path, err_type_info_t err_type_info,
+  int err_inject(int cpu, char *path, err_type_info_t err_type_info,
 		err_struct_info_t err_struct_info,
 		err_data_buffer_t err_data_buffer)
-{
+  {
 	int status;
 	char fn[MAX_FN_SIZE];
 
@@ -667,13 +667,13 @@ int err_inject(int cpu, char *path, err_type_info_t err_type_info,
 	}
 
 	return status;
-}
+  }
 
-static int construct_data_buf(char *path, err_type_info_t err_type_info,
+  static int construct_data_buf(char *path, err_type_info_t err_type_info,
 		err_struct_info_t err_struct_info,
 		err_data_buffer_t *err_data_buffer,
 		void *va1)
-{
+  {
 	char fn[MAX_FN_SIZE];
 	u64 virt_addr=0, phys_addr=0;
 
@@ -710,22 +710,22 @@ static int construct_data_buf(char *path, err_type_info_t err_type_info,
 	}
 
 	return 0;
-}
+  }
 
-typedef struct {
+  typedef struct {
 	u64 cpu;
 	u64 loop;
 	u64 interval;
 	u64 err_type_info;
 	u64 err_struct_info;
 	u64 err_data_buffer[ERR_DATA_BUFFER_SIZE];
-} parameters_t;
+  } parameters_t;
 
-parameters_t line_para;
-int para;
+  parameters_t line_para;
+  int para;
 
-static int empty_data_buffer(u64 *err_data_buffer)
-{
+  static int empty_data_buffer(u64 *err_data_buffer)
+  {
 	int empty=1;
 	int i;
 
@@ -734,10 +734,10 @@ static int empty_data_buffer(u64 *err_data_buffer)
 		empty=0;
 
 	return empty;
-}
+  }
 
-int err_inj()
-{
+  int err_inj()
+  {
 	err_type_info_t err_type_info;
 	err_struct_info_t err_struct_info;
 	err_data_buffer_t err_data_buffer;
@@ -951,10 +951,10 @@ int err_inj()
 	printf("All done.\n");
 
 	return 0;
-}
+  }
 
-void help()
-{
+  void help()
+  {
 	printf("err_inject_tool:\n");
 	printf("\t-q: query all capabilities. default: off\n");
 	printf("\t-m: procedure mode. 1: physical 2: virtual. default: 1\n");
@@ -977,10 +977,10 @@ void help()
 	printf("The tool will take err.conf file as ");
 	printf("input to inject single or multiple errors ");
 	printf("on one or multiple cpus in parallel.\n");
-}
+  }
 
-int main(int argc, char **argv)
-{
+  int main(int argc, char **argv)
+  {
 	char c;
 	int do_err_inj=0;
 	int do_query_all=0;
@@ -1064,5 +1064,4 @@ int main(int argc, char **argv)
 		help();
 
 	return 0;
-}
-
+  }
diff --git a/Documentation/ia64/fsys.txt b/Documentation/ia64/fsys.rst
similarity index 76%
rename from Documentation/ia64/fsys.txt
rename to Documentation/ia64/fsys.rst
index 59dd689d9b86..a702d2cc94b6 100644
--- a/Documentation/ia64/fsys.txt
+++ b/Documentation/ia64/fsys.rst
@@ -1,9 +1,9 @@
--*-Mode: outline-*-
-
-		Light-weight System Calls for IA-64
-		-----------------------------------
+===================================
+Light-weight System Calls for IA-64
+===================================
 
 		        Started: 13-Jan-2003
+
 		    Last update: 27-Sep-2003
 
 	              David Mosberger-Tang
@@ -52,12 +52,13 @@ privilege level is at level 0, this means that fsys-mode requires some
 care (see below).
 
 
-* How to tell fsys-mode
+How to tell fsys-mode
+=====================
 
 Linux operates in fsys-mode when (a) the privilege level is 0 (most
 privileged) and (b) the stacks have NOT been switched to kernel memory
 yet.  For convenience, the header file <asm-ia64/ptrace.h> provides
-three macros:
+three macros::
 
 	user_mode(regs)
 	user_stack(task,regs)
@@ -70,11 +71,12 @@ to by "regs" was executing in user mode (privilege level 3).
 user_stack() returns TRUE if the state pointed to by "regs" was
 executing on the user-level stack(s).  Finally, fsys_mode() returns
 TRUE if the CPU state pointed to by "regs" was executing in fsys-mode.
-The fsys_mode() macro is equivalent to the expression:
+The fsys_mode() macro is equivalent to the expression::
 
 	!user_mode(regs) && user_stack(task,regs)
 
-* How to write an fsyscall handler
+How to write an fsyscall handler
+================================
 
 The file arch/ia64/kernel/fsys.S contains a table of fsyscall-handlers
 (fsyscall_table).  This table contains one entry for each system call.
@@ -87,66 +89,72 @@ of the getpid() system call.
 
 The entry and exit-state of an fsyscall handler is as follows:
 
-** Machine state on entry to fsyscall handler:
+Machine state on entry to fsyscall handler
+------------------------------------------
 
- - r10	  = 0
- - r11	  = saved ar.pfs (a user-level value)
- - r15	  = system call number
- - r16	  = "current" task pointer (in normal kernel-mode, this is in r13)
- - r32-r39 = system call arguments
- - b6	  = return address (a user-level value)
- - ar.pfs = previous frame-state (a user-level value)
- - PSR.be = cleared to zero (i.e., little-endian byte order is in effect)
- - all other registers may contain values passed in from user-mode
+  ========= ===============================================================
+  r10	    0
+  r11	    saved ar.pfs (a user-level value)
+  r15	    system call number
+  r16	    "current" task pointer (in normal kernel-mode, this is in r13)
+  r32-r39   system call arguments
+  b6	    return address (a user-level value)
+  ar.pfs    previous frame-state (a user-level value)
+  PSR.be    cleared to zero (i.e., little-endian byte order is in effect)
+  -         all other registers may contain values passed in from user-mode
+  ========= ===============================================================
 
-** Required machine state on exit to fsyscall handler:
+Required machine state on exit to fsyscall handler
+--------------------------------------------------
 
- - r11	  = saved ar.pfs (as passed into the fsyscall handler)
- - r15	  = system call number (as passed into the fsyscall handler)
- - r32-r39 = system call arguments (as passed into the fsyscall handler)
- - b6	  = return address (as passed into the fsyscall handler)
- - ar.pfs = previous frame-state (as passed into the fsyscall handler)
+  ========= ===========================================================
+  r11	    saved ar.pfs (as passed into the fsyscall handler)
+  r15	    system call number (as passed into the fsyscall handler)
+  r32-r39   system call arguments (as passed into the fsyscall handler)
+  b6	    return address (as passed into the fsyscall handler)
+  ar.pfs    previous frame-state (as passed into the fsyscall handler)
+  ========= ===========================================================
 
 Fsyscall handlers can execute with very little overhead, but with that
 speed comes a set of restrictions:
 
- o Fsyscall-handlers MUST check for any pending work in the flags
+ * Fsyscall-handlers MUST check for any pending work in the flags
    member of the thread-info structure and if any of the
    TIF_ALLWORK_MASK flags are set, the handler needs to fall back on
    doing a full system call (by calling fsys_fallback_syscall).
 
- o Fsyscall-handlers MUST preserve incoming arguments (r32-r39, r11,
+ * Fsyscall-handlers MUST preserve incoming arguments (r32-r39, r11,
    r15, b6, and ar.pfs) because they will be needed in case of a
    system call restart.  Of course, all "preserved" registers also
    must be preserved, in accordance to the normal calling conventions.
 
- o Fsyscall-handlers MUST check argument registers for containing a
+ * Fsyscall-handlers MUST check argument registers for containing a
    NaT value before using them in any way that could trigger a
    NaT-consumption fault.  If a system call argument is found to
    contain a NaT value, an fsyscall-handler may return immediately
    with r8=EINVAL, r10=-1.
 
- o Fsyscall-handlers MUST NOT use the "alloc" instruction or perform
+ * Fsyscall-handlers MUST NOT use the "alloc" instruction or perform
    any other operation that would trigger mandatory RSE
    (register-stack engine) traffic.
 
- o Fsyscall-handlers MUST NOT write to any stacked registers because
+ * Fsyscall-handlers MUST NOT write to any stacked registers because
    it is not safe to assume that user-level called a handler with the
    proper number of arguments.
 
- o Fsyscall-handlers need to be careful when accessing per-CPU variables:
+ * Fsyscall-handlers need to be careful when accessing per-CPU variables:
    unless proper safe-guards are taken (e.g., interruptions are avoided),
    execution may be pre-empted and resumed on another CPU at any given
    time.
 
- o Fsyscall-handlers must be careful not to leak sensitive kernel'
+ * Fsyscall-handlers must be careful not to leak sensitive kernel'
    information back to user-level.  In particular, before returning to
    user-level, care needs to be taken to clear any scratch registers
    that could contain sensitive information (note that the current
    task pointer is not considered sensitive: it's already exposed
    through ar.k6).
 
- o Fsyscall-handlers MUST NOT access user-memory without first
+ * Fsyscall-handlers MUST NOT access user-memory without first
    validating access-permission (this can be done typically via
    probe.r.fault and/or probe.w.fault) and without guarding against
    memory access exceptions (this can be done with the EX() macros
@@ -162,7 +170,8 @@ fast system call execution (while fully preserving system call
 semantics), but there is also a lot of flexibility in handling more
 complicated cases.
 
-* Signal handling
+Signal handling
+===============
 
 The delivery of (asynchronous) signals must be delayed until fsys-mode
 is exited.  This is accomplished with the help of the lower-privilege
@@ -173,7 +182,8 @@ PSR.lp and returns immediately.  When fsys-mode is exited via the
 occur.  The trap handler clears PSR.lp again and returns immediately.
 The kernel exit path then checks for and delivers any pending signals.
 
-* PSR Handling
+PSR Handling
+============
 
 The "epc" instruction doesn't change the contents of PSR at all.  This
 is in contrast to a regular interruption, which clears almost all
@@ -181,6 +191,7 @@ bits.  Because of that, some care needs to be taken to ensure things
 work as expected.  The following discussion describes how each PSR bit
 is handled.
 
+======= =======================================================================
 PSR.be	Cleared when entering fsys-mode.  A srlz.d instruction is used
 	to ensure the CPU is in little-endian mode before the first
 	load/store instruction is executed.  PSR.be is normally NOT
@@ -202,7 +213,8 @@ PSR.pp	Unchanged.
 PSR.di	Unchanged.
 PSR.si	Unchanged.
 PSR.db	Unchanged.  The kernel prevents user-level from setting a hardware
-	breakpoint that triggers at any privilege level other than 3 (user-mode).
+	breakpoint that triggers at any privilege level other than
+	3 (user-mode).
 PSR.lp	Unchanged.
 PSR.tb	Lazy redirect.  If a taken-branch trap occurs while in
 	fsys-mode, the trap-handler modifies the saved machine state
@@ -235,47 +247,52 @@ PSR.ed	Unchanged.  Note: This bit could only have an effect if an fsys-mode
 PSR.bn	Unchanged.  Note: fsys-mode handlers may clear the bit, if needed.
 	Doing so requires clearing PSR.i and PSR.ic as well.
 PSR.ia	Unchanged.  Note: the ia64 linux kernel never sets this bit.
+======= =======================================================================
 
-* Using fast system calls
+Using fast system calls
+=======================
 
 To use fast system calls, userspace applications need simply call
 __kernel_syscall_via_epc().  For example
 
 -- example fgettimeofday() call --
+
 -- fgettimeofday.S --
 
-#include <asm/asmmacro.h>
+::
 
-GLOBAL_ENTRY(fgettimeofday)
-.prologue
-.save ar.pfs, r11
-mov r11 = ar.pfs
-.body 
+  #include <asm/asmmacro.h>
 
-mov r2 = 0xa000000000020660;;  // gate address 
-			       // found by inspection of System.map for the 
+  GLOBAL_ENTRY(fgettimeofday)
+  .prologue
+  .save ar.pfs, r11
+  mov r11 = ar.pfs
+  .body
+
+  mov r2 = 0xa000000000020660;;  // gate address
+			       // found by inspection of System.map for the
 			       // __kernel_syscall_via_epc() function.  See
 			       // below for how to do this for real.
 
-mov b7 = r2
-mov r15 = 1087		       // gettimeofday syscall
-;;
-br.call.sptk.many b6 = b7
-;;
+  mov b7 = r2
+  mov r15 = 1087		       // gettimeofday syscall
+  ;;
+  br.call.sptk.many b6 = b7
+  ;;
 
-.restore sp
+  .restore sp
 
-mov ar.pfs = r11
-br.ret.sptk.many rp;;	      // return to caller
-END(fgettimeofday)
+  mov ar.pfs = r11
+  br.ret.sptk.many rp;;	      // return to caller
+  END(fgettimeofday)
 
 -- end fgettimeofday.S --
 
 In reality, getting the gate address is accomplished by two extra
 values passed via the ELF auxiliary vector (include/asm-ia64/elf.h)
 
- o AT_SYSINFO : is the address of __kernel_syscall_via_epc()
- o AT_SYSINFO_EHDR : is the address of the kernel gate ELF DSO
+ * AT_SYSINFO : is the address of __kernel_syscall_via_epc()
+ * AT_SYSINFO_EHDR : is the address of the kernel gate ELF DSO
 
 The ELF DSO is a pre-linked library that is mapped in by the kernel at
 the gate page.  It is a proper ELF shared object so, with a dynamic
diff --git a/Documentation/ia64/README b/Documentation/ia64/ia64.rst
similarity index 61%
rename from Documentation/ia64/README
rename to Documentation/ia64/ia64.rst
index aa17f2154cba..b725019a9492 100644
--- a/Documentation/ia64/README
+++ b/Documentation/ia64/ia64.rst
@@ -1,43 +1,49 @@
-        Linux kernel release 2.4.xx for the IA-64 Platform
+===========================================
+Linux kernel release for the IA-64 Platform
+===========================================
 
-   These are the release notes for Linux version 2.4 for IA-64
+   These are the release notes for Linux since version 2.4 for IA-64
    platform.  This document provides information specific to IA-64
    ONLY, to get additional information about the Linux kernel also
    read the original Linux README provided with the kernel.
 
-INSTALLING the kernel:
+Installing the Kernel
+=====================
 
  - IA-64 kernel installation is the same as the other platforms, see
    original README for details.
 
 
-SOFTWARE REQUIREMENTS
+Software Requirements
+=====================
 
    Compiling and running this kernel requires an IA-64 compliant GCC
    compiler.  And various software packages also compiled with an
    IA-64 compliant GCC compiler.
 
 
-CONFIGURING the kernel:
+Configuring the Kernel
+======================
 
    Configuration is the same, see original README for details.
 
 
-COMPILING the kernel:
+Compiling the Kernel:
 
  - Compiling this kernel doesn't differ from other platform so read
    the original README for details BUT make sure you have an IA-64
    compliant GCC compiler.
 
-IA-64 SPECIFICS
+IA-64 Specifics
+===============
 
  - General issues:
 
-    o Hardly any performance tuning has been done. Obvious targets
+    * Hardly any performance tuning has been done. Obvious targets
       include the library routines (IP checksum, etc.). Less
       obvious targets include making sure we don't flush the TLB
       needlessly, etc.
 
-    o SMP locks cleanup/optimization
+    * SMP locks cleanup/optimization
 
-    o IA32 support.  Currently experimental.  It mostly works.
+    * IA32 support.  Currently experimental.  It mostly works.
diff --git a/Documentation/ia64/index.rst b/Documentation/ia64/index.rst
new file mode 100644
index 000000000000..a3e3052ad6e2
--- /dev/null
+++ b/Documentation/ia64/index.rst
@@ -0,0 +1,18 @@
+:orphan:
+
+==================
+IA-64 Architecture
+==================
+
+.. toctree::
+   :maxdepth: 1
+
+   ia64
+   aliasing
+   efirtc
+   err_inject
+   fsys
+   irq-redir
+   mca
+   serial
+   xen
diff --git a/Documentation/ia64/IRQ-redir.txt b/Documentation/ia64/irq-redir.rst
similarity index 86%
rename from Documentation/ia64/IRQ-redir.txt
rename to Documentation/ia64/irq-redir.rst
index 364ce9879f54..eedb42aacead 100644
--- a/Documentation/ia64/IRQ-redir.txt
+++ b/Documentation/ia64/irq-redir.rst
@@ -1,6 +1,8 @@
+==============================
 IRQ affinity on IA64 platforms
-------------------------------
-                           07.01.2002, Erich Focht <efocht@ess.nec.de>
+==============================
+
+07.01.2002, Erich Focht <efocht@ess.nec.de>
 
 
 By writing to /proc/irq/IRQ#/smp_affinity the interrupt routing can be
@@ -12,22 +14,27 @@ IRQ target is one particular CPU and cannot be a mask of several
 CPUs. Only the first non-zero bit is taken into account.
 
 
-Usage examples:
+Usage examples
+==============
 
 The target CPU has to be specified as a hexadecimal CPU mask. The
 first non-zero bit is the selected CPU. This format has been kept for
 compatibility reasons with i386.
 
 Set the delivery mode of interrupt 41 to fixed and route the
-interrupts to CPU #3 (logical CPU number) (2^3=0x08):
+interrupts to CPU #3 (logical CPU number) (2^3=0x08)::
+
      echo "8" >/proc/irq/41/smp_affinity
 
 Set the default route for IRQ number 41 to CPU 6 in lowest priority
-delivery mode (redirectable):
+delivery mode (redirectable)::
+
      echo "r 40" >/proc/irq/41/smp_affinity
 
-The output of the command
+The output of the command::
+
      cat /proc/irq/IRQ#/smp_affinity
+
 gives the target CPU mask for the specified interrupt vector. If the CPU
 mask is preceded by the character "r", the interrupt is redirectable
 (i.e. lowest priority mode routing is used), otherwise its route is
@@ -35,7 +42,8 @@ fixed.
 
 
 
-Initialization and default behavior:
+Initialization and default behavior
+===================================
 
 If the platform features IRQ redirection (info provided by SAL) all
 IO-SAPIC interrupts are initialized with CPU#0 as their default target
@@ -43,9 +51,11 @@ and the routing is the so called "lowest priority mode" (actually
 fixed SAPIC mode with hint). The XTP chipset registers are used as hints
 for the IRQ routing. Currently in Linux XTP registers can have three
 values:
+
 	- minimal for an idle task,
 	- normal if any other task runs,
 	- maximal if the CPU is going to be switched off.
+
 The IRQ is routed to the CPU with lowest XTP register value, the
 search begins at the default CPU. Therefore most of the interrupts
 will be handled by CPU #0.
@@ -53,12 +63,14 @@ will be handled by CPU #0.
 If the platform doesn't feature interrupt redirection IOSAPIC fixed
 routing is used. The target CPUs are distributed in a round robin
 manner. IRQs will be routed only to the selected target CPUs. Check
-with
+with::
+
         cat /proc/interrupts
 
 
 
-Comments:
+Comments
+========
 
 On large (multi-node) systems it is recommended to route the IRQs to
 the node to which the corresponding device is connected.
diff --git a/Documentation/ia64/mca.txt b/Documentation/ia64/mca.rst
similarity index 96%
rename from Documentation/ia64/mca.txt
rename to Documentation/ia64/mca.rst
index f097c60cba1b..08270bba44a4 100644
--- a/Documentation/ia64/mca.txt
+++ b/Documentation/ia64/mca.rst
@@ -1,5 +1,8 @@
-An ad-hoc collection of notes on IA64 MCA and INIT processing.  Feel
-free to update it with notes about any area that is not clear.
+=============================================================
+An ad-hoc collection of notes on IA64 MCA and INIT processing
+=============================================================
+
+Feel free to update it with notes about any area that is not clear.
 
 ---
 
@@ -82,7 +85,8 @@ if we have a choice here.
   own stack as running on that cpu.  Then a recursive error gets a
   trace of the failing handler's "task".
 
-[1] My (Keith Owens) original design called for ia64 to separate its
+[1]
+    My (Keith Owens) original design called for ia64 to separate its
     struct task and the kernel stacks.  Then the MCA/INIT data would be
     chained stacks like i386 interrupt stacks.  But that required
     radical surgery on the rest of ia64, plus extra hard wired TLB
diff --git a/Documentation/ia64/serial.txt b/Documentation/ia64/serial.rst
similarity index 87%
rename from Documentation/ia64/serial.txt
rename to Documentation/ia64/serial.rst
index a63d2c54329b..1de70c305a79 100644
--- a/Documentation/ia64/serial.txt
+++ b/Documentation/ia64/serial.rst
@@ -1,4 +1,9 @@
-SERIAL DEVICE NAMING
+==============
+Serial Devices
+==============
+
+Serial Device Naming
+====================
 
     As of 2.6.10, serial devices on ia64 are named based on the
     order of ACPI and PCI enumeration.  The first device in the
@@ -30,17 +35,21 @@ SERIAL DEVICE NAMING
     (described in the ACPI namespace) plus an MP[2] (a PCI device) has
     these ports:
 
-                                  pre-2.6.10      pre-2.6.10
-                    MMIO         (EFI console    (EFI console
-                   address        on builtin)     on MP port)    2.6.10
-                  ==========      ==========      ==========     ======
+      ==========  ==========     ============    ============   =======
+      Type        MMIO           pre-2.6.10      pre-2.6.10     2.6.10+
+		  address
+				 (EFI console    (EFI console
+                                 on builtin)     on MP port)
+      ==========  ==========     ============    ============   =======
       builtin     0xff5e0000        ttyS0           ttyS1         ttyS0
       MP UPS      0xf8031000        ttyS1           ttyS2         ttyS1
       MP Console  0xf8030000        ttyS2           ttyS0         ttyS2
       MP 2        0xf8030010        ttyS3           ttyS3         ttyS3
       MP 3        0xf8030038        ttyS4           ttyS4         ttyS4
+      ==========  ==========     ============    ============   =======
 
-CONSOLE SELECTION
+Console Selection
+=================
 
     EFI knows what your console devices are, but it doesn't tell the
     kernel quite enough to actually locate them.  The DIG64 HCDP
@@ -67,7 +76,8 @@ CONSOLE SELECTION
     entries in /etc/inittab (for getty) and /etc/securetty (to allow
     root login).
 
-EARLY SERIAL CONSOLE
+Early Serial Console
+====================
 
     The kernel can't start using a serial console until it knows where
     the device lives.  Normally this happens when the driver enumerates
@@ -80,7 +90,8 @@ EARLY SERIAL CONSOLE
     or if the EFI console path contains only a UART device and the
     firmware supplies an HCDP.
 
-TROUBLESHOOTING SERIAL CONSOLE PROBLEMS
+Troubleshooting Serial Console Problems
+=======================================
 
     No kernel output after elilo prints "Uncompressing Linux... done":
 
@@ -133,19 +144,22 @@ TROUBLESHOOTING SERIAL CONSOLE PROBLEMS
 
 
 
-[1] http://www.dig64.org/specifications/agreement 
+[1]
+    http://www.dig64.org/specifications/agreement
     The table was originally defined as the "HCDP" for "Headless
     Console/Debug Port."  The current version is the "PCDP" for
     "Primary Console and Debug Port Devices."
 
-[2] The HP MP (management processor) is a PCI device that provides
+[2]
+    The HP MP (management processor) is a PCI device that provides
     several UARTs.  One of the UARTs is often used as a console; the
     EFI Boot Manager identifies it as "Acpi(HWP0002,700)/Pci(...)/Uart".
     The external connection is usually a 25-pin connector, and a
     special dongle converts that to three 9-pin connectors, one of
     which is labelled "Console."
 
-[3] EFI console devices are configured using the EFI Boot Manager
+[3]
+    EFI console devices are configured using the EFI Boot Manager
     "Boot option maintenance" menu.  You may have to interrupt the
     boot sequence to use this menu, and you will have to reset the
     box after changing console configuration.
diff --git a/Documentation/ia64/xen.rst b/Documentation/ia64/xen.rst
new file mode 100644
index 000000000000..831339c74441
--- /dev/null
+++ b/Documentation/ia64/xen.rst
@@ -0,0 +1,206 @@
+********************************************************
+Recipe for getting/building/running Xen/ia64 with pv_ops
+********************************************************
+This recipe describes how to get xen-ia64 source and build it,
+and run domU with pv_ops.
+
+Requirements
+============
+
+  - python
+  - mercurial
+    it (aka "hg") is an open-source source code
+    management software. See the below.
+    http://www.selenic.com/mercurial/wiki/
+  - git
+  - bridge-utils
+
+Getting and Building Xen and Dom0
+=================================
+
+  My environment is:
+
+    - Machine  : Tiger4
+    - Domain0 OS  : RHEL5
+    - DomainU OS  : RHEL5
+
+ 1. Download source::
+
+	# hg clone http://xenbits.xensource.com/ext/ia64/xen-unstable.hg
+	# cd xen-unstable.hg
+	# hg clone http://xenbits.xensource.com/ext/ia64/linux-2.6.18-xen.hg
+
+ 2. # make world
+
+ 3. # make install-tools
+
+ 4. copy kernels and xen::
+
+	# cp xen/xen.gz /boot/efi/efi/redhat/
+	# cp build-linux-2.6.18-xen_ia64/vmlinux.gz \
+	/boot/efi/efi/redhat/vmlinuz-2.6.18.8-xen
+
+ 5. make initrd for Dom0/DomU::
+
+	# make -C linux-2.6.18-xen.hg ARCH=ia64 modules_install \
+          O=$(pwd)/build-linux-2.6.18-xen_ia64
+	# mkinitrd -f /boot/efi/efi/redhat/initrd-2.6.18.8-xen.img \
+	  2.6.18.8-xen --builtin mptspi --builtin mptbase \
+	  --builtin mptscsih --builtin uhci-hcd --builtin ohci-hcd \
+	  --builtin ehci-hcd
+
+Making a disk image for guest OS
+================================
+
+ 1. make file::
+
+      # dd if=/dev/zero of=/root/rhel5.img bs=1M seek=4096 count=0
+      # mke2fs -F -j /root/rhel5.img
+      # mount -o loop /root/rhel5.img /mnt
+      # cp -ax /{dev,var,etc,usr,bin,sbin,lib} /mnt
+      # mkdir /mnt/{root,proc,sys,home,tmp}
+
+      Note: You may miss some device files. If so, please create them
+      with mknod. Or you can use tar instead of cp.
+
+ 2. modify DomU's fstab::
+
+      # vi /mnt/etc/fstab
+         /dev/xvda1  /            ext3    defaults        1 1
+         none        /dev/pts     devpts  gid=5,mode=620  0 0
+         none        /dev/shm     tmpfs   defaults        0 0
+         none        /proc        proc    defaults        0 0
+         none        /sys         sysfs   defaults        0 0
+
+ 3. modify inittab
+
+    set runlevel to 3 to avoid X trying to start::
+
+      # vi /mnt/etc/inittab
+         id:3:initdefault:
+
+    Start a getty on the hvc0 console::
+
+       X0:2345:respawn:/sbin/mingetty hvc0
+
+    tty1-6 mingetty can be commented out
+
+ 4. add hvc0 into /etc/securetty::
+
+      # vi /mnt/etc/securetty (add hvc0)
+
+ 5. umount::
+
+      # umount /mnt
+
+FYI, virt-manager can also make a disk image for guest OS.
+It's GUI tools and easy to make it.
+
+Boot Xen & Domain0
+==================
+
+ 1. replace elilo
+    elilo of RHEL5 can boot Xen and Dom0.
+    If you use old elilo (e.g RHEL4), please download from the below
+    http://elilo.sourceforge.net/cgi-bin/blosxom
+    and copy into /boot/efi/efi/redhat/::
+
+      # cp elilo-3.6-ia64.efi /boot/efi/efi/redhat/elilo.efi
+
+ 2. modify elilo.conf (like the below)::
+
+      # vi /boot/efi/efi/redhat/elilo.conf
+      prompt
+      timeout=20
+      default=xen
+      relocatable
+
+      image=vmlinuz-2.6.18.8-xen
+             label=xen
+             vmm=xen.gz
+             initrd=initrd-2.6.18.8-xen.img
+             read-only
+             append=" -- rhgb root=/dev/sda2"
+
+The append options before "--" are for xen hypervisor,
+the options after "--" are for dom0.
+
+FYI, your machine may need console options like
+"com1=19200,8n1 console=vga,com1". For example,
+append="com1=19200,8n1 console=vga,com1 -- rhgb console=tty0 \
+console=ttyS0 root=/dev/sda2"
+
+Getting and Building domU with pv_ops
+=====================================
+
+ 1. get pv_ops tree::
+
+      # git clone http://people.valinux.co.jp/~yamahata/xen-ia64/linux-2.6-xen-ia64.git/
+
+ 2. git branch (if necessary)::
+
+      # cd linux-2.6-xen-ia64/
+      # git checkout -b your_branch origin/xen-ia64-domu-minimal-2008may19
+
+   Note:
+     The current branch is xen-ia64-domu-minimal-2008may19.
+     But you would find the new branch. You can see with
+     "git branch -r" to get the branch lists.
+
+       http://people.valinux.co.jp/~yamahata/xen-ia64/for_eagl/linux-2.6-ia64-pv-ops.git/
+
+     is also available.
+
+     The tree is based on
+
+      git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 test)
+
+ 3. copy .config for pv_ops of domU::
+
+      # cp arch/ia64/configs/xen_domu_wip_defconfig .config
+
+ 4. make kernel with pv_ops::
+
+      # make oldconfig
+      # make
+
+ 5. install the kernel and initrd::
+
+      # cp vmlinux.gz /boot/efi/efi/redhat/vmlinuz-2.6-pv_ops-xenU
+      # make modules_install
+      # mkinitrd -f /boot/efi/efi/redhat/initrd-2.6-pv_ops-xenU.img \
+        2.6.26-rc3xen-ia64-08941-g1b12161 --builtin mptspi \
+        --builtin mptbase --builtin mptscsih --builtin uhci-hcd \
+        --builtin ohci-hcd --builtin ehci-hcd
+
+Boot DomainU with pv_ops
+========================
+
+ 1. make config of DomU::
+
+     # vi /etc/xen/rhel5
+       kernel = "/boot/efi/efi/redhat/vmlinuz-2.6-pv_ops-xenU"
+       ramdisk = "/boot/efi/efi/redhat/initrd-2.6-pv_ops-xenU.img"
+       vcpus = 1
+       memory = 512
+       name = "rhel5"
+       disk = [ 'file:/root/rhel5.img,xvda1,w' ]
+       root = "/dev/xvda1 ro"
+       extra= "rhgb console=hvc0"
+
+ 2. After boot xen and dom0, start xend::
+
+	# /etc/init.d/xend start
+
+   ( In the debugging case, `# XEND_DEBUG=1 xend trace_start` )
+
+ 3. start domU::
+
+	# xm create -c rhel5
+
+Reference
+=========
+- Wiki of Xen/IA64 upstream merge
+  http://wiki.xensource.com/xenwiki/XenIA64/UpstreamMerge
+
+Written by Akio Takebe <takebe_akio@jp.fujitsu.com> on 28 May 2008
diff --git a/Documentation/ia64/xen.txt b/Documentation/ia64/xen.txt
deleted file mode 100644
index a12c74ce2773..000000000000
--- a/Documentation/ia64/xen.txt
+++ /dev/null
@@ -1,183 +0,0 @@
-       Recipe for getting/building/running Xen/ia64 with pv_ops
-       --------------------------------------------------------
-
-This recipe describes how to get xen-ia64 source and build it,
-and run domU with pv_ops.
-
-============
-Requirements
-============
-
-  - python
-  - mercurial
-    it (aka "hg") is an open-source source code
-    management software. See the below.
-    http://www.selenic.com/mercurial/wiki/
-  - git
-  - bridge-utils
-
-=================================
-Getting and Building Xen and Dom0
-=================================
-
-  My environment is;
-    Machine  : Tiger4
-    Domain0 OS  : RHEL5
-    DomainU OS  : RHEL5
-
- 1. Download source
-    # hg clone http://xenbits.xensource.com/ext/ia64/xen-unstable.hg
-    # cd xen-unstable.hg
-    # hg clone http://xenbits.xensource.com/ext/ia64/linux-2.6.18-xen.hg
-
- 2. # make world
-
- 3. # make install-tools
-
- 4. copy kernels and xen
-    # cp xen/xen.gz /boot/efi/efi/redhat/
-    # cp build-linux-2.6.18-xen_ia64/vmlinux.gz \
-      /boot/efi/efi/redhat/vmlinuz-2.6.18.8-xen
-
- 5. make initrd for Dom0/DomU
-    # make -C linux-2.6.18-xen.hg ARCH=ia64 modules_install \
-      O=$(pwd)/build-linux-2.6.18-xen_ia64
-    # mkinitrd -f /boot/efi/efi/redhat/initrd-2.6.18.8-xen.img \
-      2.6.18.8-xen --builtin mptspi --builtin mptbase \
-      --builtin mptscsih --builtin uhci-hcd --builtin ohci-hcd \
-      --builtin ehci-hcd
-
-================================
-Making a disk image for guest OS
-================================
-
- 1. make file
-    # dd if=/dev/zero of=/root/rhel5.img bs=1M seek=4096 count=0
-    # mke2fs -F -j /root/rhel5.img
-    # mount -o loop /root/rhel5.img /mnt
-    # cp -ax /{dev,var,etc,usr,bin,sbin,lib} /mnt
-    # mkdir /mnt/{root,proc,sys,home,tmp}
-
-    Note: You may miss some device files. If so, please create them
-    with mknod. Or you can use tar instead of cp.
-
- 2. modify DomU's fstab
-    # vi /mnt/etc/fstab
-       /dev/xvda1  /            ext3    defaults        1 1
-       none        /dev/pts     devpts  gid=5,mode=620  0 0
-       none        /dev/shm     tmpfs   defaults        0 0
-       none        /proc        proc    defaults        0 0
-       none        /sys         sysfs   defaults        0 0
-
- 3. modify inittab
-    set runlevel to 3 to avoid X trying to start
-    # vi /mnt/etc/inittab
-       id:3:initdefault:
-    Start a getty on the hvc0 console
-       X0:2345:respawn:/sbin/mingetty hvc0
-    tty1-6 mingetty can be commented out
-
- 4. add hvc0 into /etc/securetty
-    # vi /mnt/etc/securetty (add hvc0)
-
- 5. umount
-    # umount /mnt
-
-FYI, virt-manager can also make a disk image for guest OS.
-It's GUI tools and easy to make it.
-
-==================
-Boot Xen & Domain0
-==================
-
- 1. replace elilo
-    elilo of RHEL5 can boot Xen and Dom0.
-    If you use old elilo (e.g RHEL4), please download from the below
-    http://elilo.sourceforge.net/cgi-bin/blosxom
-    and copy into /boot/efi/efi/redhat/
-    # cp elilo-3.6-ia64.efi /boot/efi/efi/redhat/elilo.efi
-
- 2. modify elilo.conf (like the below)
-    # vi /boot/efi/efi/redhat/elilo.conf
-     prompt
-     timeout=20
-     default=xen
-     relocatable
-
-     image=vmlinuz-2.6.18.8-xen
-             label=xen
-             vmm=xen.gz
-             initrd=initrd-2.6.18.8-xen.img
-             read-only
-             append=" -- rhgb root=/dev/sda2"
-
-The append options before "--" are for xen hypervisor,
-the options after "--" are for dom0.
-
-FYI, your machine may need console options like
-"com1=19200,8n1 console=vga,com1". For example,
-append="com1=19200,8n1 console=vga,com1 -- rhgb console=tty0 \
-console=ttyS0 root=/dev/sda2"
-
-=====================================
-Getting and Building domU with pv_ops
-=====================================
-
- 1. get pv_ops tree
-    # git clone http://people.valinux.co.jp/~yamahata/xen-ia64/linux-2.6-xen-ia64.git/
-
- 2. git branch (if necessary)
-    # cd linux-2.6-xen-ia64/
-    # git checkout -b your_branch origin/xen-ia64-domu-minimal-2008may19
-    (Note: The current branch is xen-ia64-domu-minimal-2008may19.
-    But you would find the new branch. You can see with
-    "git branch -r" to get the branch lists.
-    http://people.valinux.co.jp/~yamahata/xen-ia64/for_eagl/linux-2.6-ia64-pv-ops.git/
-    is also available. The tree is based on
-    git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 test)
-
-
- 3. copy .config for pv_ops of domU
-    # cp arch/ia64/configs/xen_domu_wip_defconfig .config
-
- 4. make kernel with pv_ops
-    # make oldconfig
-    # make
-
- 5. install the kernel and initrd
-    # cp vmlinux.gz /boot/efi/efi/redhat/vmlinuz-2.6-pv_ops-xenU
-    # make modules_install
-    # mkinitrd -f /boot/efi/efi/redhat/initrd-2.6-pv_ops-xenU.img \
-      2.6.26-rc3xen-ia64-08941-g1b12161 --builtin mptspi \
-      --builtin mptbase --builtin mptscsih --builtin uhci-hcd \
-      --builtin ohci-hcd --builtin ehci-hcd
-
-========================
-Boot DomainU with pv_ops
-========================
-
- 1. make config of DomU
-   # vi /etc/xen/rhel5
-     kernel = "/boot/efi/efi/redhat/vmlinuz-2.6-pv_ops-xenU"
-     ramdisk = "/boot/efi/efi/redhat/initrd-2.6-pv_ops-xenU.img"
-     vcpus = 1
-     memory = 512
-     name = "rhel5"
-     disk = [ 'file:/root/rhel5.img,xvda1,w' ]
-     root = "/dev/xvda1 ro"
-     extra= "rhgb console=hvc0"
-
- 2. After boot xen and dom0, start xend
-   # /etc/init.d/xend start
-   ( In the debugging case, # XEND_DEBUG=1 xend trace_start )
-
- 3. start domU
-   # xm create -c rhel5
-
-=========
-Reference
-=========
-- Wiki of Xen/IA64 upstream merge
-  http://wiki.xensource.com/xenwiki/XenIA64/UpstreamMerge
-
-Written by Akio Takebe <takebe_akio@jp.fujitsu.com> on 28 May 2008
diff --git a/MAINTAINERS b/MAINTAINERS
index 4e1e598a32d9..ddd526efcb46 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14083,7 +14083,7 @@ SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER
 M:	Pat Gefre <pfg@sgi.com>
 L:	linux-ia64@vger.kernel.org
 S:	Supported
-F:	Documentation/ia64/serial.txt
+F:	Documentation/ia64/serial.rst
 F:	drivers/tty/serial/ioc?_serial.c
 F:	include/linux/ioc?.h
 
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index 8f106638913c..3795d18276c4 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -852,7 +852,7 @@ valid_phys_addr_range (phys_addr_t phys_addr, unsigned long size)
 	 * /dev/mem reads and writes use copy_to_user(), which implicitly
 	 * uses a granule-sized kernel identity mapping.  It's really
 	 * only safe to do this for regions in kern_memmap.  For more
-	 * details, see Documentation/ia64/aliasing.txt.
+	 * details, see Documentation/ia64/aliasing.rst.
 	 */
 	attr = kern_mem_attribute(phys_addr, size);
 	if (attr & EFI_MEMORY_WB || attr & EFI_MEMORY_UC)
diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S
index d80c99a5f55d..0750a716adc7 100644
--- a/arch/ia64/kernel/fsys.S
+++ b/arch/ia64/kernel/fsys.S
@@ -28,7 +28,7 @@
 #include <asm/native/inst.h>
 
 /*
- * See Documentation/ia64/fsys.txt for details on fsyscalls.
+ * See Documentation/ia64/fsys.rst for details on fsyscalls.
  *
  * On entry to an fsyscall handler:
  *   r10	= 0 (i.e., defaults to "successful syscall return")
diff --git a/arch/ia64/mm/ioremap.c b/arch/ia64/mm/ioremap.c
index 43964cde6214..c7da3376b6f8 100644
--- a/arch/ia64/mm/ioremap.c
+++ b/arch/ia64/mm/ioremap.c
@@ -45,7 +45,7 @@ ioremap (unsigned long phys_addr, unsigned long size)
 	/*
 	 * For things in kern_memmap, we must use the same attribute
 	 * as the rest of the kernel.  For more details, see
-	 * Documentation/ia64/aliasing.txt.
+	 * Documentation/ia64/aliasing.rst.
 	 */
 	attr = kern_mem_attribute(phys_addr, size);
 	if (attr & EFI_MEMORY_WB)
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 196a0dd7ff97..881dd5327752 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -449,7 +449,7 @@ pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma,
 		return -ENOSYS;
 
 	/*
-	 * Avoid attribute aliasing.  See Documentation/ia64/aliasing.txt
+	 * Avoid attribute aliasing.  See Documentation/ia64/aliasing.rst
 	 * for more details.
 	 */
 	if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 61/79] docs: leds: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (56 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 60/79] docs: ia64: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-23 19:00     ` Jacek Anaszewski
  2019-04-22 13:27   ` [PATCH v2 62/79] docs: laptops: " Mauro Carvalho Chehab
                     ` (19 subsequent siblings)
  77 siblings, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Vadim Pasternak, Jacek Anaszewski, Pavel Machek,
	Pablo Neira Ayuso, Jozsef Kadlecsik, Florian Westphal,
	David S. Miller, linux-leds, netfilter-devel, coreteam, netdev

Rename the leds documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/laptops/thinkpad-acpi.txt       |   4 +-
 Documentation/leds/index.rst                  |  25 ++
 .../leds/{leds-blinkm.txt => leds-blinkm.rst} |  63 ++---
 ...s-class-flash.txt => leds-class-flash.rst} |  49 ++--
 .../leds/{leds-class.txt => leds-class.rst}   |  15 +-
 .../leds/{leds-lm3556.txt => leds-lm3556.rst} | 100 ++++++--
 .../leds/{leds-lp3944.txt => leds-lp3944.rst} |  23 +-
 Documentation/leds/leds-lp5521.rst            | 115 +++++++++
 Documentation/leds/leds-lp5521.txt            | 101 --------
 Documentation/leds/leds-lp5523.rst            | 147 ++++++++++++
 Documentation/leds/leds-lp5523.txt            | 130 ----------
 Documentation/leds/leds-lp5562.rst            | 137 +++++++++++
 Documentation/leds/leds-lp5562.txt            | 120 ----------
 Documentation/leds/leds-lp55xx.rst            | 224 ++++++++++++++++++
 Documentation/leds/leds-lp55xx.txt            | 194 ---------------
 Documentation/leds/leds-mlxcpld.rst           | 118 +++++++++
 Documentation/leds/leds-mlxcpld.txt           | 110 ---------
 ...edtrig-oneshot.txt => ledtrig-oneshot.rst} |  11 +-
 ...ig-transient.txt => ledtrig-transient.rst} |  63 +++--
 ...edtrig-usbport.txt => ledtrig-usbport.rst} |  11 +-
 Documentation/leds/{uleds.txt => uleds.rst}   |   5 +-
 MAINTAINERS                                   |   2 +-
 drivers/leds/trigger/Kconfig                  |   2 +-
 drivers/leds/trigger/ledtrig-transient.c      |   2 +-
 net/netfilter/Kconfig                         |   2 +-
 25 files changed, 996 insertions(+), 777 deletions(-)
 create mode 100644 Documentation/leds/index.rst
 rename Documentation/leds/{leds-blinkm.txt => leds-blinkm.rst} (56%)
 rename Documentation/leds/{leds-class-flash.txt => leds-class-flash.rst} (74%)
 rename Documentation/leds/{leds-class.txt => leds-class.rst} (92%)
 rename Documentation/leds/{leds-lm3556.txt => leds-lm3556.rst} (70%)
 rename Documentation/leds/{leds-lp3944.txt => leds-lp3944.rst} (78%)
 create mode 100644 Documentation/leds/leds-lp5521.rst
 delete mode 100644 Documentation/leds/leds-lp5521.txt
 create mode 100644 Documentation/leds/leds-lp5523.rst
 delete mode 100644 Documentation/leds/leds-lp5523.txt
 create mode 100644 Documentation/leds/leds-lp5562.rst
 delete mode 100644 Documentation/leds/leds-lp5562.txt
 create mode 100644 Documentation/leds/leds-lp55xx.rst
 delete mode 100644 Documentation/leds/leds-lp55xx.txt
 create mode 100644 Documentation/leds/leds-mlxcpld.rst
 delete mode 100644 Documentation/leds/leds-mlxcpld.txt
 rename Documentation/leds/{ledtrig-oneshot.txt => ledtrig-oneshot.rst} (90%)
 rename Documentation/leds/{ledtrig-transient.txt => ledtrig-transient.rst} (81%)
 rename Documentation/leds/{ledtrig-usbport.txt => ledtrig-usbport.rst} (86%)
 rename Documentation/leds/{uleds.txt => uleds.rst} (95%)

diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 3de3c95f01f6..65719384fc36 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -679,7 +679,7 @@ status as "unknown". The available commands are:
 sysfs notes:
 
 The ThinkLight sysfs interface is documented by the LED class
-documentation, in Documentation/leds/leds-class.txt.  The ThinkLight LED name
+documentation, in Documentation/leds/leds-class.rst.  The ThinkLight LED name
 is "tpacpi::thinklight".
 
 Due to limitations in the sysfs LED class, if the status of the ThinkLight
@@ -779,7 +779,7 @@ All of the above can be turned on and off and can be made to blink.
 sysfs notes:
 
 The ThinkPad LED sysfs interface is described in detail by the LED class
-documentation, in Documentation/leds/leds-class.txt.
+documentation, in Documentation/leds/leds-class.rst.
 
 The LEDs are named (in LED ID order, from 0 to 12):
 "tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt",
diff --git a/Documentation/leds/index.rst b/Documentation/leds/index.rst
new file mode 100644
index 000000000000..9885f7c1b75d
--- /dev/null
+++ b/Documentation/leds/index.rst
@@ -0,0 +1,25 @@
+:orphan:
+
+====
+LEDs
+====
+
+.. toctree::
+   :maxdepth: 1
+
+   leds-class
+   leds-class-flash
+   ledtrig-oneshot
+   ledtrig-transient
+   ledtrig-usbport
+
+   uleds
+
+   leds-blinkm
+   leds-lm3556
+   leds-lp3944
+   leds-lp5521
+   leds-lp5523
+   leds-lp5562
+   leds-lp55xx
+   leds-mlxcpld
diff --git a/Documentation/leds/leds-blinkm.txt b/Documentation/leds/leds-blinkm.rst
similarity index 56%
rename from Documentation/leds/leds-blinkm.txt
rename to Documentation/leds/leds-blinkm.rst
index 9dd92f4cf4e1..4c970b7d21cd 100644
--- a/Documentation/leds/leds-blinkm.txt
+++ b/Documentation/leds/leds-blinkm.rst
@@ -1,3 +1,7 @@
+==================
+Leds BlinkM driver
+==================
+
 The leds-blinkm driver supports the devices of the BlinkM family.
 
 They are RGB-LED modules driven by a (AT)tiny microcontroller and
@@ -14,35 +18,36 @@ The interface this driver provides is 2-fold:
 a) LED class interface for use with triggers
 ############################################
 
-The registration follows the scheme:
-blinkm-<i2c-bus-nr>-<i2c-device-nr>-<color>
+The registration follows the scheme::
 
-$ ls -h /sys/class/leds/blinkm-6-*
-/sys/class/leds/blinkm-6-9-blue:
-brightness  device  max_brightness  power  subsystem  trigger  uevent
+  blinkm-<i2c-bus-nr>-<i2c-device-nr>-<color>
 
-/sys/class/leds/blinkm-6-9-green:
-brightness  device  max_brightness  power  subsystem  trigger  uevent
+  $ ls -h /sys/class/leds/blinkm-6-*
+  /sys/class/leds/blinkm-6-9-blue:
+  brightness  device  max_brightness  power  subsystem  trigger  uevent
 
-/sys/class/leds/blinkm-6-9-red:
-brightness  device  max_brightness  power  subsystem  trigger  uevent
+  /sys/class/leds/blinkm-6-9-green:
+  brightness  device  max_brightness  power  subsystem  trigger  uevent
+
+  /sys/class/leds/blinkm-6-9-red:
+  brightness  device  max_brightness  power  subsystem  trigger  uevent
 
 (same is /sys/bus/i2c/devices/6-0009/leds)
 
 We can control the colors separated into red, green and blue and
 assign triggers on each color.
 
-E.g.:
+E.g.::
 
-$ cat blinkm-6-9-blue/brightness
-05
+  $ cat blinkm-6-9-blue/brightness
+  05
 
-$ echo 200 > blinkm-6-9-blue/brightness
-$
+  $ echo 200 > blinkm-6-9-blue/brightness
+  $
 
-$ modprobe ledtrig-heartbeat
-$ echo heartbeat > blinkm-6-9-green/trigger
-$
+  $ modprobe ledtrig-heartbeat
+  $ echo heartbeat > blinkm-6-9-green/trigger
+  $
 
 
 b) Sysfs group to control rgb, fade, hsb, scripts ...
@@ -52,25 +57,25 @@ This extended interface is available as folder blinkm
 in the sysfs folder of the I2C device.
 E.g. below /sys/bus/i2c/devices/6-0009/blinkm
 
-$ ls -h /sys/bus/i2c/devices/6-0009/blinkm/
-blue  green  red  test
+  $ ls -h /sys/bus/i2c/devices/6-0009/blinkm/
+  blue  green  red  test
 
 Currently supported is just setting red, green, blue
 and a test sequence.
 
-E.g.:
+E.g.::
 
-$ cat *
-00
-00
-00
-#Write into test to start test sequence!#
+  $ cat *
+  00
+  00
+  00
+  #Write into test to start test sequence!#
 
-$ echo 1 > test
-$
+  $ echo 1 > test
+  $
 
-$ echo 255 > red
-$
+  $ echo 255 > red
+  $
 
 
 
diff --git a/Documentation/leds/leds-class-flash.txt b/Documentation/leds/leds-class-flash.rst
similarity index 74%
rename from Documentation/leds/leds-class-flash.txt
rename to Documentation/leds/leds-class-flash.rst
index 8da3c6f4b60b..6ec12c5a1a0e 100644
--- a/Documentation/leds/leds-class-flash.txt
+++ b/Documentation/leds/leds-class-flash.rst
@@ -1,9 +1,9 @@
-
+==============================
 Flash LED handling under Linux
 ==============================
 
 Some LED devices provide two modes - torch and flash. In the LED subsystem
-those modes are supported by LED class (see Documentation/leds/leds-class.txt)
+those modes are supported by LED class (see Documentation/leds/leds-class.rst)
 and LED Flash class respectively. The torch mode related features are enabled
 by default and the flash ones only if a driver declares it by setting
 LED_DEV_CAP_FLASH flag.
@@ -14,6 +14,7 @@ registered in the LED subsystem with led_classdev_flash_register function.
 
 Following sysfs attributes are exposed for controlling flash LED devices:
 (see Documentation/ABI/testing/sysfs-class-led-flash)
+
 	- flash_brightness
 	- max_flash_brightness
 	- flash_timeout
@@ -31,30 +32,46 @@ be defined in the kernel config.
 
 The driver must call the v4l2_flash_init function to get registered in the
 V4L2 subsystem. The function takes six arguments:
-- dev       : flash device, e.g. an I2C device
-- of_node   : of_node of the LED, may be NULL if the same as device's
-- fled_cdev : LED flash class device to wrap
-- iled_cdev : LED flash class device representing indicator LED associated with
-	      fled_cdev, may be NULL
-- ops : V4L2 specific ops
-	* external_strobe_set - defines the source of the flash LED strobe -
+
+- dev:
+	flash device, e.g. an I2C device
+- of_node:
+	of_node of the LED, may be NULL if the same as device's
+- fled_cdev:
+	LED flash class device to wrap
+- iled_cdev:
+	LED flash class device representing indicator LED associated with
+	fled_cdev, may be NULL
+- ops:
+	V4L2 specific ops
+
+	* external_strobe_set
+		defines the source of the flash LED strobe -
 		V4L2_CID_FLASH_STROBE control or external source, typically
 		a sensor, which makes it possible to synchronise the flash
 		strobe start with exposure start,
-	* intensity_to_led_brightness and led_brightness_to_intensity - perform
+	* intensity_to_led_brightness and led_brightness_to_intensity
+		perform
 		enum led_brightness <-> V4L2 intensity conversion in a device
 		specific manner - they can be used for devices with non-linear
 		LED current scale.
-- config : configuration for V4L2 Flash sub-device
-	* dev_name - the name of the media entity, unique in the system,
-	* flash_faults - bitmask of flash faults that the LED flash class
+- config:
+	configuration for V4L2 Flash sub-device
+
+	* dev_name
+		the name of the media entity, unique in the system,
+	* flash_faults
+		bitmask of flash faults that the LED flash class
 		device can report; corresponding LED_FAULT* bit definitions are
 		available in <linux/led-class-flash.h>,
-	* torch_intensity - constraints for the LED in TORCH mode
+	* torch_intensity
+		constraints for the LED in TORCH mode
 		in microamperes,
-	* indicator_intensity - constraints for the indicator LED
+	* indicator_intensity
+		constraints for the indicator LED
 		in microamperes,
-	* has_external_strobe - determines whether the flash strobe source
+	* has_external_strobe
+		determines whether the flash strobe source
 		can be switched to external,
 
 On remove the v4l2_flash_release function has to be called, which takes one
diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.rst
similarity index 92%
rename from Documentation/leds/leds-class.txt
rename to Documentation/leds/leds-class.rst
index 8b39cc6b03ee..df0120a1ee3c 100644
--- a/Documentation/leds/leds-class.txt
+++ b/Documentation/leds/leds-class.rst
@@ -1,4 +1,4 @@
-
+========================
 LED handling under Linux
 ========================
 
@@ -43,7 +43,7 @@ LED Device Naming
 
 Is currently of the form:
 
-"devicename:colour:function"
+	"devicename:colour:function"
 
 There have been calls for LED properties such as colour to be exported as
 individual led class attributes. As a solution which doesn't incur as much
@@ -57,9 +57,12 @@ Brightness setting API
 
 LED subsystem core exposes following API for setting brightness:
 
-    - led_set_brightness : it is guaranteed not to sleep, passing LED_OFF stops
+    - led_set_brightness:
+		it is guaranteed not to sleep, passing LED_OFF stops
 		blinking,
-    - led_set_brightness_sync : for use cases when immediate effect is desired -
+
+    - led_set_brightness_sync:
+		for use cases when immediate effect is desired -
 		it can block the caller for the time required for accessing
 		device registers and can sleep, passing LED_OFF stops hardware
 		blinking, returns -EBUSY if software blink fallback is enabled.
@@ -70,7 +73,7 @@ LED registration API
 
 A driver wanting to register a LED classdev for use by other drivers /
 userspace needs to allocate and fill a led_classdev struct and then call
-[devm_]led_classdev_register. If the non devm version is used the driver
+`[devm_]led_classdev_register`. If the non devm version is used the driver
 must call led_classdev_unregister from its remove function before
 free-ing the led_classdev struct.
 
@@ -94,7 +97,7 @@ with brightness value LED_OFF, which should stop any software
 timers that may have been required for blinking.
 
 The blink_set() function should choose a user friendly blinking value
-if it is called with *delay_on==0 && *delay_off==0 parameters. In this
+if it is called with `*delay_on==0` && `*delay_off==0` parameters. In this
 case the driver should give back the chosen value through delay_on and
 delay_off parameters to the leds subsystem.
 
diff --git a/Documentation/leds/leds-lm3556.txt b/Documentation/leds/leds-lm3556.rst
similarity index 70%
rename from Documentation/leds/leds-lm3556.txt
rename to Documentation/leds/leds-lm3556.rst
index 62278e871b50..1ef17d7d800e 100644
--- a/Documentation/leds/leds-lm3556.txt
+++ b/Documentation/leds/leds-lm3556.rst
@@ -1,68 +1,118 @@
+========================
 Kernel driver for lm3556
 ========================
 
-*Texas Instrument:
- 1.5 A Synchronous Boost LED Flash Driver w/ High-Side Current Source
+* Texas Instrument:
+  1.5 A Synchronous Boost LED Flash Driver w/ High-Side Current Source
 * Datasheet: http://www.national.com/ds/LM/LM3556.pdf
 
 Authors:
-	Daniel Jeong
+      - Daniel Jeong
+
 	Contact:Daniel Jeong(daniel.jeong-at-ti.com, gshark.jeong-at-gmail.com)
 
 Description
 -----------
 There are 3 functions in LM3556, Flash, Torch and Indicator.
 
-FLASH MODE
+Flash Mode
+^^^^^^^^^^
+
 In Flash Mode, the LED current source(LED) provides 16 target current levels
 from 93.75 mA to 1500 mA.The Flash currents are adjusted via the CURRENT
 CONTROL REGISTER(0x09).Flash mode is activated by the ENABLE REGISTER(0x0A),
 or by pulling the STROBE pin HIGH.
+
 LM3556 Flash can be controlled through sys/class/leds/flash/brightness file
+
 * if STROBE pin is enabled, below example control brightness only, and
-ON / OFF will be controlled by STROBE pin.
+  ON / OFF will be controlled by STROBE pin.
 
 Flash Example:
-OFF     : #echo 0 > sys/class/leds/flash/brightness
-93.75 mA: #echo 1 > sys/class/leds/flash/brightness
-... .....
-1500  mA: #echo 16 > sys/class/leds/flash/brightness
 
-TORCH MODE
+OFF::
+
+	#echo 0 > sys/class/leds/flash/brightness
+
+93.75 mA::
+
+	#echo 1 > sys/class/leds/flash/brightness
+
+...
+
+1500  mA::
+
+	#echo 16 > sys/class/leds/flash/brightness
+
+Torch Mode
+^^^^^^^^^^
+
 In Torch Mode, the current source(LED) is programmed via the CURRENT CONTROL
 REGISTER(0x09).Torch Mode is activated by the ENABLE REGISTER(0x0A) or by the
 hardware TORCH input.
+
 LM3556 torch can be controlled through sys/class/leds/torch/brightness file.
 * if TORCH pin is enabled, below example control brightness only,
 and ON / OFF will be controlled by TORCH pin.
 
 Torch Example:
-OFF     : #echo 0 > sys/class/leds/torch/brightness
-46.88 mA: #echo 1 > sys/class/leds/torch/brightness
-... .....
-375 mA  : #echo 8 > sys/class/leds/torch/brightness
 
-INDICATOR MODE
+OFF::
+
+	#echo 0 > sys/class/leds/torch/brightness
+
+46.88 mA::
+
+	#echo 1 > sys/class/leds/torch/brightness
+
+...
+
+375 mA::
+
+	#echo 8 > sys/class/leds/torch/brightness
+
+Indicator Mode
+^^^^^^^^^^^^^^
+
 Indicator pattern can be set through sys/class/leds/indicator/pattern file,
 and 4 patterns are pre-defined in indicator_pattern array.
+
 According to N-lank, Pulse time and N Period values, different pattern wiill
 be generated.If you want new patterns for your own device, change
 indicator_pattern array with your own values and INDIC_PATTERN_SIZE.
+
 Please refer datasheet for more detail about N-Blank, Pulse time and N Period.
 
 Indicator pattern example:
-pattern 0: #echo 0 > sys/class/leds/indicator/pattern
-....
-pattern 3: #echo 3 > sys/class/leds/indicator/pattern
+
+pattern 0::
+
+	#echo 0 > sys/class/leds/indicator/pattern
+
+...
+
+pattern 3::
+
+	#echo 3 > sys/class/leds/indicator/pattern
 
 Indicator brightness can be controlled through
 sys/class/leds/indicator/brightness file.
 
 Example:
-OFF      : #echo 0 > sys/class/leds/indicator/brightness
-5.86 mA  : #echo 1 > sys/class/leds/indicator/brightness
-........
-46.875mA : #echo 8 > sys/class/leds/indicator/brightness
+
+OFF::
+
+	#echo 0 > sys/class/leds/indicator/brightness
+
+5.86 mA::
+
+	#echo 1 > sys/class/leds/indicator/brightness
+
+...
+
+46.875mA::
+
+	#echo 8 > sys/class/leds/indicator/brightness
 
 Notes
 -----
@@ -70,7 +120,8 @@ Driver expects it is registered using the i2c_board_info mechanism.
 To register the chip at address 0x63 on specific adapter, set the platform data
 according to include/linux/platform_data/leds-lm3556.h, set the i2c board info
 
-Example:
+Example::
+
 	static struct i2c_board_info board_i2c_ch4[] __initdata = {
 		{
 			 I2C_BOARD_INFO(LM3556_NAME, 0x63),
@@ -80,6 +131,7 @@ Example:
 
 and register it in the platform init function
 
-Example:
+Example::
+
 	board_register_i2c_bus(4, 400,
 				board_i2c_ch4, ARRAY_SIZE(board_i2c_ch4));
diff --git a/Documentation/leds/leds-lp3944.txt b/Documentation/leds/leds-lp3944.rst
similarity index 78%
rename from Documentation/leds/leds-lp3944.txt
rename to Documentation/leds/leds-lp3944.rst
index e88ac3b60c08..c2f87dc1a3a9 100644
--- a/Documentation/leds/leds-lp3944.txt
+++ b/Documentation/leds/leds-lp3944.rst
@@ -1,14 +1,20 @@
+====================
 Kernel driver lp3944
 ====================
 
   * National Semiconductor LP3944 Fun-light Chip
+
     Prefix: 'lp3944'
+
     Addresses scanned: None (see the Notes section below)
-    Datasheet: Publicly available at the National Semiconductor website
-               http://www.national.com/pf/LP/LP3944.html
+
+    Datasheet:
+
+	Publicly available at the National Semiconductor website
+	http://www.national.com/pf/LP/LP3944.html
 
 Authors:
-        Antonio Ospite <ospite@studenti.unina.it>
+	Antonio Ospite <ospite@studenti.unina.it>
 
 
 Description
@@ -19,8 +25,11 @@ is used as a led controller.
 
 The DIM modes are used to set _blink_ patterns for leds, the pattern is
 specified supplying two parameters:
-  - period: from 0s to 1.6s
-  - duty cycle: percentage of the period the led is on, from 0 to 100
+
+  - period:
+	from 0s to 1.6s
+  - duty cycle:
+	percentage of the period the led is on, from 0 to 100
 
 Setting a led in DIM0 or DIM1 mode makes it blink according to the pattern.
 See the datasheet for details.
@@ -35,7 +44,7 @@ The chip is used mainly in embedded contexts, so this driver expects it is
 registered using the i2c_board_info mechanism.
 
 To register the chip at address 0x60 on adapter 0, set the platform data
-according to include/linux/leds-lp3944.h, set the i2c board info:
+according to include/linux/leds-lp3944.h, set the i2c board info::
 
 	static struct i2c_board_info a910_i2c_board_info[] __initdata = {
 		{
@@ -44,7 +53,7 @@ according to include/linux/leds-lp3944.h, set the i2c board info:
 		},
 	};
 
-and register it in the platform init function
+and register it in the platform init function::
 
 	i2c_register_board_info(0, a910_i2c_board_info,
 			ARRAY_SIZE(a910_i2c_board_info));
diff --git a/Documentation/leds/leds-lp5521.rst b/Documentation/leds/leds-lp5521.rst
new file mode 100644
index 000000000000..0432615b083d
--- /dev/null
+++ b/Documentation/leds/leds-lp5521.rst
@@ -0,0 +1,115 @@
+========================
+Kernel driver for lp5521
+========================
+
+* National Semiconductor LP5521 led driver chip
+* Datasheet: http://www.national.com/pf/LP/LP5521.html
+
+Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
+
+Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
+
+Description
+-----------
+
+LP5521 can drive up to 3 channels. Leds can be controlled directly via
+the led class control interface. Channels have generic names:
+lp5521:channelx, where x is 0 .. 2
+
+All three channels can be also controlled using the engine micro programs.
+More details of the instructions can be found from the public data sheet.
+
+LP5521 has the internal program memory for running various LED patterns.
+There are two ways to run LED patterns.
+
+1) Legacy interface - enginex_mode and enginex_load
+   Control interface for the engines:
+
+   x is 1 .. 3
+
+   enginex_mode:
+	disabled, load, run
+   enginex_load:
+	store program (visible only in engine load mode)
+
+  Example (start to blink the channel 2 led)::
+
+	cd   /sys/class/leds/lp5521:channel2/device
+	echo "load" > engine3_mode
+	echo "037f4d0003ff6000" > engine3_load
+	echo "run" > engine3_mode
+
+  To stop the engine::
+
+	echo "disabled" > engine3_mode
+
+2) Firmware interface - LP55xx common interface
+
+For the details, please refer to 'firmware' section in leds-lp55xx.txt
+
+sysfs contains a selftest entry.
+
+The test communicates with the chip and checks that
+the clock mode is automatically set to the requested one.
+
+Each channel has its own led current settings.
+
+- /sys/class/leds/lp5521:channel0/led_current - RW
+- /sys/class/leds/lp5521:channel0/max_current - RO
+
+Format: 10x mA i.e 10 means 1.0 mA
+
+example platform data::
+
+  static struct lp55xx_led_config lp5521_led_config[] = {
+	  {
+		.name = "red",
+		  .chan_nr        = 0,
+		  .led_current    = 50,
+		.max_current    = 130,
+	  }, {
+		.name = "green",
+		  .chan_nr        = 1,
+		  .led_current    = 0,
+		.max_current    = 130,
+	  }, {
+		.name = "blue",
+		  .chan_nr        = 2,
+		  .led_current    = 0,
+		.max_current    = 130,
+	  }
+  };
+
+  static int lp5521_setup(void)
+  {
+	/* setup HW resources */
+  }
+
+  static void lp5521_release(void)
+  {
+	/* Release HW resources */
+  }
+
+  static void lp5521_enable(bool state)
+  {
+	/* Control of chip enable signal */
+  }
+
+  static struct lp55xx_platform_data lp5521_platform_data = {
+	  .led_config     = lp5521_led_config,
+	  .num_channels   = ARRAY_SIZE(lp5521_led_config),
+	  .clock_mode     = LP55XX_CLOCK_EXT,
+	  .setup_resources   = lp5521_setup,
+	  .release_resources = lp5521_release,
+	  .enable            = lp5521_enable,
+  };
+
+Note:
+  chan_nr can have values between 0 and 2.
+  The name of each channel can be configurable.
+  If the name field is not defined, the default name will be set to 'xxxx:channelN'
+  (XXXX : pdata->label or i2c client name, N : channel number)
+
+
+If the current is set to 0 in the platform data, that channel is
+disabled and it is not visible in the sysfs.
diff --git a/Documentation/leds/leds-lp5521.txt b/Documentation/leds/leds-lp5521.txt
deleted file mode 100644
index d08d8c179f85..000000000000
--- a/Documentation/leds/leds-lp5521.txt
+++ /dev/null
@@ -1,101 +0,0 @@
-Kernel driver for lp5521
-========================
-
-* National Semiconductor LP5521 led driver chip
-* Datasheet: http://www.national.com/pf/LP/LP5521.html
-
-Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
-Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
-
-Description
------------
-
-LP5521 can drive up to 3 channels. Leds can be controlled directly via
-the led class control interface. Channels have generic names:
-lp5521:channelx, where x is 0 .. 2
-
-All three channels can be also controlled using the engine micro programs.
-More details of the instructions can be found from the public data sheet.
-
-LP5521 has the internal program memory for running various LED patterns.
-There are two ways to run LED patterns.
-
-1) Legacy interface - enginex_mode and enginex_load
-  Control interface for the engines:
-  x is 1 .. 3
-  enginex_mode : disabled, load, run
-  enginex_load : store program (visible only in engine load mode)
-
-  Example (start to blink the channel 2 led):
-  cd   /sys/class/leds/lp5521:channel2/device
-  echo "load" > engine3_mode
-  echo "037f4d0003ff6000" > engine3_load
-  echo "run" > engine3_mode
-
-  To stop the engine:
-  echo "disabled" > engine3_mode
-
-2) Firmware interface - LP55xx common interface
-  For the details, please refer to 'firmware' section in leds-lp55xx.txt
-
-sysfs contains a selftest entry.
-The test communicates with the chip and checks that
-the clock mode is automatically set to the requested one.
-
-Each channel has its own led current settings.
-/sys/class/leds/lp5521:channel0/led_current - RW
-/sys/class/leds/lp5521:channel0/max_current - RO
-Format: 10x mA i.e 10 means 1.0 mA
-
-example platform data:
-
-Note: chan_nr can have values between 0 and 2.
-The name of each channel can be configurable.
-If the name field is not defined, the default name will be set to 'xxxx:channelN'
-(XXXX : pdata->label or i2c client name, N : channel number)
-
-static struct lp55xx_led_config lp5521_led_config[] = {
-        {
-		.name = "red",
-                .chan_nr        = 0,
-                .led_current    = 50,
-		.max_current    = 130,
-        }, {
-		.name = "green",
-                .chan_nr        = 1,
-                .led_current    = 0,
-		.max_current    = 130,
-        }, {
-		.name = "blue",
-                .chan_nr        = 2,
-                .led_current    = 0,
-		.max_current    = 130,
-        }
-};
-
-static int lp5521_setup(void)
-{
-	/* setup HW resources */
-}
-
-static void lp5521_release(void)
-{
-	/* Release HW resources */
-}
-
-static void lp5521_enable(bool state)
-{
-	/* Control of chip enable signal */
-}
-
-static struct lp55xx_platform_data lp5521_platform_data = {
-        .led_config     = lp5521_led_config,
-        .num_channels   = ARRAY_SIZE(lp5521_led_config),
-        .clock_mode     = LP55XX_CLOCK_EXT,
-        .setup_resources   = lp5521_setup,
-        .release_resources = lp5521_release,
-        .enable            = lp5521_enable,
-};
-
-If the current is set to 0 in the platform data, that channel is
-disabled and it is not visible in the sysfs.
diff --git a/Documentation/leds/leds-lp5523.rst b/Documentation/leds/leds-lp5523.rst
new file mode 100644
index 000000000000..7d7362a1dd57
--- /dev/null
+++ b/Documentation/leds/leds-lp5523.rst
@@ -0,0 +1,147 @@
+========================
+Kernel driver for lp5523
+========================
+
+* National Semiconductor LP5523 led driver chip
+* Datasheet: http://www.national.com/pf/LP/LP5523.html
+
+Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
+Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
+
+Description
+-----------
+LP5523 can drive up to 9 channels. Leds can be controlled directly via
+the led class control interface.
+The name of each channel is configurable in the platform data - name and label.
+There are three options to make the channel name.
+
+a) Define the 'name' in the platform data
+
+To make specific channel name, then use 'name' platform data.
+
+- /sys/class/leds/R1               (name: 'R1')
+- /sys/class/leds/B1               (name: 'B1')
+
+b) Use the 'label' with no 'name' field
+
+For one device name with channel number, then use 'label'.
+- /sys/class/leds/RGB:channelN     (label: 'RGB', N: 0 ~ 8)
+
+c) Default
+
+If both fields are NULL, 'lp5523' is used by default.
+- /sys/class/leds/lp5523:channelN  (N: 0 ~ 8)
+
+LP5523 has the internal program memory for running various LED patterns.
+There are two ways to run LED patterns.
+
+1) Legacy interface - enginex_mode, enginex_load and enginex_leds
+
+  Control interface for the engines:
+
+  x is 1 .. 3
+
+  enginex_mode:
+	disabled, load, run
+  enginex_load:
+	microcode load
+  enginex_leds:
+	led mux control
+
+  ::
+
+	cd /sys/class/leds/lp5523:channel2/device
+	echo "load" > engine3_mode
+	echo "9d80400004ff05ff437f0000" > engine3_load
+	echo "111111111" > engine3_leds
+	echo "run" > engine3_mode
+
+  To stop the engine::
+
+	echo "disabled" > engine3_mode
+
+2) Firmware interface - LP55xx common interface
+
+For the details, please refer to 'firmware' section in leds-lp55xx.txt
+
+LP5523 has three master faders. If a channel is mapped to one of
+the master faders, its output is dimmed based on the value of the master
+fader.
+
+For example::
+
+  echo "123000123" > master_fader_leds
+
+creates the following channel-fader mappings::
+
+  channel 0,6 to master_fader1
+  channel 1,7 to master_fader2
+  channel 2,8 to master_fader3
+
+Then, to have 25% of the original output on channel 0,6::
+
+  echo 64 > master_fader1
+
+To have 0% of the original output (i.e. no output) channel 1,7::
+
+  echo 0 > master_fader2
+
+To have 100% of the original output (i.e. no dimming) on channel 2,8::
+
+  echo 255 > master_fader3
+
+To clear all master fader controls::
+
+  echo "000000000" > master_fader_leds
+
+Selftest uses always the current from the platform data.
+
+Each channel contains led current settings.
+- /sys/class/leds/lp5523:channel2/led_current - RW
+- /sys/class/leds/lp5523:channel2/max_current - RO
+
+Format: 10x mA i.e 10 means 1.0 mA
+
+Example platform data::
+
+	static struct lp55xx_led_config lp5523_led_config[] = {
+		{
+			.name		= "D1",
+			.chan_nr        = 0,
+			.led_current    = 50,
+			.max_current    = 130,
+		},
+	...
+		{
+			.chan_nr        = 8,
+			.led_current    = 50,
+			.max_current    = 130,
+		}
+	};
+
+	static int lp5523_setup(void)
+	{
+		/* Setup HW resources */
+	}
+
+	static void lp5523_release(void)
+	{
+		/* Release HW resources */
+	}
+
+	static void lp5523_enable(bool state)
+	{
+		/* Control chip enable signal */
+	}
+
+	static struct lp55xx_platform_data lp5523_platform_data = {
+		.led_config     = lp5523_led_config,
+		.num_channels   = ARRAY_SIZE(lp5523_led_config),
+		.clock_mode     = LP55XX_CLOCK_EXT,
+		.setup_resources   = lp5523_setup,
+		.release_resources = lp5523_release,
+		.enable            = lp5523_enable,
+	};
+
+Note
+  chan_nr can have values between 0 and 8.
diff --git a/Documentation/leds/leds-lp5523.txt b/Documentation/leds/leds-lp5523.txt
deleted file mode 100644
index 0961a060fc4d..000000000000
--- a/Documentation/leds/leds-lp5523.txt
+++ /dev/null
@@ -1,130 +0,0 @@
-Kernel driver for lp5523
-========================
-
-* National Semiconductor LP5523 led driver chip
-* Datasheet: http://www.national.com/pf/LP/LP5523.html
-
-Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
-Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
-
-Description
------------
-LP5523 can drive up to 9 channels. Leds can be controlled directly via
-the led class control interface.
-The name of each channel is configurable in the platform data - name and label.
-There are three options to make the channel name.
-
-a) Define the 'name' in the platform data
-To make specific channel name, then use 'name' platform data.
-/sys/class/leds/R1               (name: 'R1')
-/sys/class/leds/B1               (name: 'B1')
-
-b) Use the 'label' with no 'name' field
-For one device name with channel number, then use 'label'.
-/sys/class/leds/RGB:channelN     (label: 'RGB', N: 0 ~ 8)
-
-c) Default
-If both fields are NULL, 'lp5523' is used by default.
-/sys/class/leds/lp5523:channelN  (N: 0 ~ 8)
-
-LP5523 has the internal program memory for running various LED patterns.
-There are two ways to run LED patterns.
-
-1) Legacy interface - enginex_mode, enginex_load and enginex_leds
-  Control interface for the engines:
-  x is 1 .. 3
-  enginex_mode : disabled, load, run
-  enginex_load : microcode load
-  enginex_leds : led mux control
-
-  cd /sys/class/leds/lp5523:channel2/device
-  echo "load" > engine3_mode
-  echo "9d80400004ff05ff437f0000" > engine3_load
-  echo "111111111" > engine3_leds
-  echo "run" > engine3_mode
-
-  To stop the engine:
-  echo "disabled" > engine3_mode
-
-2) Firmware interface - LP55xx common interface
-  For the details, please refer to 'firmware' section in leds-lp55xx.txt
-
-LP5523 has three master faders. If a channel is mapped to one of
-the master faders, its output is dimmed based on the value of the master
-fader.
-
-For example,
-
-  echo "123000123" > master_fader_leds
-
-creates the following channel-fader mappings:
-
-  channel 0,6 to master_fader1
-  channel 1,7 to master_fader2
-  channel 2,8 to master_fader3
-
-Then, to have 25% of the original output on channel 0,6:
-
-  echo 64 > master_fader1
-
-To have 0% of the original output (i.e. no output) channel 1,7:
-
-  echo 0 > master_fader2
-
-To have 100% of the original output (i.e. no dimming) on channel 2,8:
-
-  echo 255 > master_fader3
-
-To clear all master fader controls:
-
-  echo "000000000" > master_fader_leds
-
-Selftest uses always the current from the platform data.
-
-Each channel contains led current settings.
-/sys/class/leds/lp5523:channel2/led_current - RW
-/sys/class/leds/lp5523:channel2/max_current - RO
-Format: 10x mA i.e 10 means 1.0 mA
-
-Example platform data:
-
-Note - chan_nr can have values between 0 and 8.
-
-static struct lp55xx_led_config lp5523_led_config[] = {
-        {
-		.name		= "D1",
-                .chan_nr        = 0,
-                .led_current    = 50,
-		.max_current    = 130,
-        },
-...
-        {
-                .chan_nr        = 8,
-                .led_current    = 50,
-		.max_current    = 130,
-        }
-};
-
-static int lp5523_setup(void)
-{
-	/* Setup HW resources */
-}
-
-static void lp5523_release(void)
-{
-	/* Release HW resources */
-}
-
-static void lp5523_enable(bool state)
-{
-	/* Control chip enable signal */
-}
-
-static struct lp55xx_platform_data lp5523_platform_data = {
-        .led_config     = lp5523_led_config,
-        .num_channels   = ARRAY_SIZE(lp5523_led_config),
-        .clock_mode     = LP55XX_CLOCK_EXT,
-        .setup_resources   = lp5523_setup,
-        .release_resources = lp5523_release,
-        .enable            = lp5523_enable,
-};
diff --git a/Documentation/leds/leds-lp5562.rst b/Documentation/leds/leds-lp5562.rst
new file mode 100644
index 000000000000..79bbb2487ff6
--- /dev/null
+++ b/Documentation/leds/leds-lp5562.rst
@@ -0,0 +1,137 @@
+========================
+Kernel driver for lp5562
+========================
+
+* TI LP5562 LED Driver
+
+Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+
+Description
+===========
+
+  LP5562 can drive up to 4 channels. R/G/B and White.
+  LEDs can be controlled directly via the led class control interface.
+
+  All four channels can be also controlled using the engine micro programs.
+  LP5562 has the internal program memory for running various LED patterns.
+  For the details, please refer to 'firmware' section in leds-lp55xx.txt
+
+Device attribute
+================
+
+engine_mux
+  3 Engines are allocated in LP5562, but the number of channel is 4.
+  Therefore each channel should be mapped to the engine number.
+
+  Value: RGB or W
+
+  This attribute is used for programming LED data with the firmware interface.
+  Unlike the LP5521/LP5523/55231, LP5562 has unique feature for the engine mux,
+  so additional sysfs is required
+
+  LED Map
+
+  ===== === ===============================
+  Red   ... Engine 1 (fixed)
+  Green ... Engine 2 (fixed)
+  Blue  ... Engine 3 (fixed)
+  White ... Engine 1 or 2 or 3 (selective)
+  ===== === ===============================
+
+How to load the program data using engine_mux
+=============================================
+
+  Before loading the LP5562 program data, engine_mux should be written between
+  the engine selection and loading the firmware.
+  Engine mux has two different mode, RGB and W.
+  RGB is used for loading RGB program data, W is used for W program data.
+
+  For example, run blinking green channel pattern::
+
+    echo 2 > /sys/bus/i2c/devices/xxxx/select_engine     # 2 is for green channel
+    echo "RGB" > /sys/bus/i2c/devices/xxxx/engine_mux    # engine mux for RGB
+    echo 1 > /sys/class/firmware/lp5562/loading
+    echo "4000600040FF6000" > /sys/class/firmware/lp5562/data
+    echo 0 > /sys/class/firmware/lp5562/loading
+    echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
+
+  To run a blinking white pattern::
+
+    echo 1 or 2 or 3 > /sys/bus/i2c/devices/xxxx/select_engine
+    echo "W" > /sys/bus/i2c/devices/xxxx/engine_mux
+    echo 1 > /sys/class/firmware/lp5562/loading
+    echo "4000600040FF6000" > /sys/class/firmware/lp5562/data
+    echo 0 > /sys/class/firmware/lp5562/loading
+    echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
+
+How to load the predefined patterns
+===================================
+
+  Please refer to 'leds-lp55xx.txt"
+
+Setting Current of Each Channel
+===============================
+
+  Like LP5521 and LP5523/55231, LP5562 provides LED current settings.
+  The 'led_current' and 'max_current' are used.
+
+Example of Platform data
+========================
+
+::
+
+	static struct lp55xx_led_config lp5562_led_config[] = {
+		{
+			.name 		= "R",
+			.chan_nr	= 0,
+			.led_current	= 20,
+			.max_current	= 40,
+		},
+		{
+			.name 		= "G",
+			.chan_nr	= 1,
+			.led_current	= 20,
+			.max_current	= 40,
+		},
+		{
+			.name 		= "B",
+			.chan_nr	= 2,
+			.led_current	= 20,
+			.max_current	= 40,
+		},
+		{
+			.name 		= "W",
+			.chan_nr	= 3,
+			.led_current	= 20,
+			.max_current	= 40,
+		},
+	};
+
+	static int lp5562_setup(void)
+	{
+		/* setup HW resources */
+	}
+
+	static void lp5562_release(void)
+	{
+		/* Release HW resources */
+	}
+
+	static void lp5562_enable(bool state)
+	{
+		/* Control of chip enable signal */
+	}
+
+	static struct lp55xx_platform_data lp5562_platform_data = {
+		.led_config     = lp5562_led_config,
+		.num_channels   = ARRAY_SIZE(lp5562_led_config),
+		.setup_resources   = lp5562_setup,
+		.release_resources = lp5562_release,
+		.enable            = lp5562_enable,
+	};
+
+To configure the platform specific data, lp55xx_platform_data structure is used
+
+
+If the current is set to 0 in the platform data, that channel is
+disabled and it is not visible in the sysfs.
diff --git a/Documentation/leds/leds-lp5562.txt b/Documentation/leds/leds-lp5562.txt
deleted file mode 100644
index 5a823ff6b393..000000000000
--- a/Documentation/leds/leds-lp5562.txt
+++ /dev/null
@@ -1,120 +0,0 @@
-Kernel driver for LP5562
-========================
-
-* TI LP5562 LED Driver
-
-Author: Milo(Woogyom) Kim <milo.kim@ti.com>
-
-Description
-
-  LP5562 can drive up to 4 channels. R/G/B and White.
-  LEDs can be controlled directly via the led class control interface.
-
-  All four channels can be also controlled using the engine micro programs.
-  LP5562 has the internal program memory for running various LED patterns.
-  For the details, please refer to 'firmware' section in leds-lp55xx.txt
-
-Device attribute: engine_mux
-
-  3 Engines are allocated in LP5562, but the number of channel is 4.
-  Therefore each channel should be mapped to the engine number.
-  Value : RGB or W
-
-  This attribute is used for programming LED data with the firmware interface.
-  Unlike the LP5521/LP5523/55231, LP5562 has unique feature for the engine mux,
-  so additional sysfs is required.
-
-  LED Map
-  Red   ... Engine 1 (fixed)
-  Green ... Engine 2 (fixed)
-  Blue  ... Engine 3 (fixed)
-  White ... Engine 1 or 2 or 3 (selective)
-
-How to load the program data using engine_mux
-
-  Before loading the LP5562 program data, engine_mux should be written between
-  the engine selection and loading the firmware.
-  Engine mux has two different mode, RGB and W.
-  RGB is used for loading RGB program data, W is used for W program data.
-
-  For example, run blinking green channel pattern,
-  echo 2 > /sys/bus/i2c/devices/xxxx/select_engine     # 2 is for green channel
-  echo "RGB" > /sys/bus/i2c/devices/xxxx/engine_mux    # engine mux for RGB
-  echo 1 > /sys/class/firmware/lp5562/loading
-  echo "4000600040FF6000" > /sys/class/firmware/lp5562/data
-  echo 0 > /sys/class/firmware/lp5562/loading
-  echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
-
-  To run a blinking white pattern,
-  echo 1 or 2 or 3 > /sys/bus/i2c/devices/xxxx/select_engine
-  echo "W" > /sys/bus/i2c/devices/xxxx/engine_mux
-  echo 1 > /sys/class/firmware/lp5562/loading
-  echo "4000600040FF6000" > /sys/class/firmware/lp5562/data
-  echo 0 > /sys/class/firmware/lp5562/loading
-  echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
-
-How to load the predefined patterns
-
-  Please refer to 'leds-lp55xx.txt"
-
-Setting Current of Each Channel
-
-  Like LP5521 and LP5523/55231, LP5562 provides LED current settings.
-  The 'led_current' and 'max_current' are used.
-
-(Example of Platform data)
-
-To configure the platform specific data, lp55xx_platform_data structure is used.
-
-static struct lp55xx_led_config lp5562_led_config[] = {
-	{
-		.name 		= "R",
-		.chan_nr	= 0,
-		.led_current	= 20,
-		.max_current	= 40,
-	},
-	{
-		.name 		= "G",
-		.chan_nr	= 1,
-		.led_current	= 20,
-		.max_current	= 40,
-	},
-	{
-		.name 		= "B",
-		.chan_nr	= 2,
-		.led_current	= 20,
-		.max_current	= 40,
-	},
-	{
-		.name 		= "W",
-		.chan_nr	= 3,
-		.led_current	= 20,
-		.max_current	= 40,
-	},
-};
-
-static int lp5562_setup(void)
-{
-	/* setup HW resources */
-}
-
-static void lp5562_release(void)
-{
-	/* Release HW resources */
-}
-
-static void lp5562_enable(bool state)
-{
-	/* Control of chip enable signal */
-}
-
-static struct lp55xx_platform_data lp5562_platform_data = {
-        .led_config     = lp5562_led_config,
-        .num_channels   = ARRAY_SIZE(lp5562_led_config),
-        .setup_resources   = lp5562_setup,
-        .release_resources = lp5562_release,
-        .enable            = lp5562_enable,
-};
-
-If the current is set to 0 in the platform data, that channel is
-disabled and it is not visible in the sysfs.
diff --git a/Documentation/leds/leds-lp55xx.rst b/Documentation/leds/leds-lp55xx.rst
new file mode 100644
index 000000000000..632e41cec0b5
--- /dev/null
+++ b/Documentation/leds/leds-lp55xx.rst
@@ -0,0 +1,224 @@
+=================================================
+LP5521/LP5523/LP55231/LP5562/LP8501 Common Driver
+=================================================
+
+Authors: Milo(Woogyom) Kim <milo.kim@ti.com>
+
+Description
+-----------
+LP5521, LP5523/55231, LP5562 and LP8501 have common features as below.
+
+  Register access via the I2C
+  Device initialization/deinitialization
+  Create LED class devices for multiple output channels
+  Device attributes for user-space interface
+  Program memory for running LED patterns
+
+The LP55xx common driver provides these features using exported functions.
+
+  lp55xx_init_device() / lp55xx_deinit_device()
+  lp55xx_register_leds() / lp55xx_unregister_leds()
+  lp55xx_regsister_sysfs() / lp55xx_unregister_sysfs()
+
+( Driver Structure Data )
+
+In lp55xx common driver, two different data structure is used.
+
+* lp55xx_led
+    control multi output LED channels such as led current, channel index.
+* lp55xx_chip
+    general chip control such like the I2C and platform data.
+
+For example, LP5521 has maximum 3 LED channels.
+LP5523/55231 has 9 output channels::
+
+  lp55xx_chip for LP5521 ... lp55xx_led #1
+			     lp55xx_led #2
+			     lp55xx_led #3
+
+  lp55xx_chip for LP5523 ... lp55xx_led #1
+			     lp55xx_led #2
+				   .
+				   .
+			     lp55xx_led #9
+
+( Chip Dependent Code )
+
+To support device specific configurations, special structure
+'lpxx_device_config' is used.
+
+  - Maximum number of channels
+  - Reset command, chip enable command
+  - Chip specific initialization
+  - Brightness control register access
+  - Setting LED output current
+  - Program memory address access for running patterns
+  - Additional device specific attributes
+
+( Firmware Interface )
+
+LP55xx family devices have the internal program memory for running
+various LED patterns.
+
+This pattern data is saved as a file in the user-land or
+hex byte string is written into the memory through the I2C.
+
+LP55xx common driver supports the firmware interface.
+
+LP55xx chips have three program engines.
+
+To load and run the pattern, the programming sequence is following.
+
+  (1) Select an engine number (1/2/3)
+  (2) Mode change to load
+  (3) Write pattern data into selected area
+  (4) Mode change to run
+
+The LP55xx common driver provides simple interfaces as below.
+
+select_engine:
+	Select which engine is used for running program
+run_engine:
+	Start program which is loaded via the firmware interface
+firmware:
+	Load program data
+
+In case of LP5523, one more command is required, 'enginex_leds'.
+It is used for selecting LED output(s) at each engine number.
+In more details, please refer to 'leds-lp5523.txt'.
+
+For example, run blinking pattern in engine #1 of LP5521::
+
+	echo 1 > /sys/bus/i2c/devices/xxxx/select_engine
+	echo 1 > /sys/class/firmware/lp5521/loading
+	echo "4000600040FF6000" > /sys/class/firmware/lp5521/data
+	echo 0 > /sys/class/firmware/lp5521/loading
+	echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
+
+For example, run blinking pattern in engine #3 of LP55231
+
+Two LEDs are configured as pattern output channels::
+
+	echo 3 > /sys/bus/i2c/devices/xxxx/select_engine
+	echo 1 > /sys/class/firmware/lp55231/loading
+	echo "9d0740ff7e0040007e00a0010000" > /sys/class/firmware/lp55231/data
+	echo 0 > /sys/class/firmware/lp55231/loading
+	echo "000001100" > /sys/bus/i2c/devices/xxxx/engine3_leds
+	echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
+
+To start blinking patterns in engine #2 and #3 simultaneously::
+
+	for idx in 2 3
+	do
+	echo $idx > /sys/class/leds/red/device/select_engine
+	sleep 0.1
+	echo 1 > /sys/class/firmware/lp5521/loading
+	echo "4000600040FF6000" > /sys/class/firmware/lp5521/data
+	echo 0 > /sys/class/firmware/lp5521/loading
+	done
+	echo 1 > /sys/class/leds/red/device/run_engine
+
+Here is another example for LP5523.
+
+Full LED strings are selected by 'engine2_leds'::
+
+	echo 2 > /sys/bus/i2c/devices/xxxx/select_engine
+	echo 1 > /sys/class/firmware/lp5523/loading
+	echo "9d80400004ff05ff437f0000" > /sys/class/firmware/lp5523/data
+	echo 0 > /sys/class/firmware/lp5523/loading
+	echo "111111111" > /sys/bus/i2c/devices/xxxx/engine2_leds
+	echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
+
+As soon as 'loading' is set to 0, registered callback is called.
+Inside the callback, the selected engine is loaded and memory is updated.
+To run programmed pattern, 'run_engine' attribute should be enabled.
+
+The pattern sequence of LP8501 is similar to LP5523.
+
+However pattern data is specific.
+
+Ex 1) Engine 1 is used::
+
+	echo 1 > /sys/bus/i2c/devices/xxxx/select_engine
+	echo 1 > /sys/class/firmware/lp8501/loading
+	echo "9d0140ff7e0040007e00a001c000" > /sys/class/firmware/lp8501/data
+	echo 0 > /sys/class/firmware/lp8501/loading
+	echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
+
+Ex 2) Engine 2 and 3 are used at the same time::
+
+	echo 2 > /sys/bus/i2c/devices/xxxx/select_engine
+	sleep 1
+	echo 1 > /sys/class/firmware/lp8501/loading
+	echo "9d0140ff7e0040007e00a001c000" > /sys/class/firmware/lp8501/data
+	echo 0 > /sys/class/firmware/lp8501/loading
+	sleep 1
+	echo 3 > /sys/bus/i2c/devices/xxxx/select_engine
+	sleep 1
+	echo 1 > /sys/class/firmware/lp8501/loading
+	echo "9d0340ff7e0040007e00a001c000" > /sys/class/firmware/lp8501/data
+	echo 0 > /sys/class/firmware/lp8501/loading
+	sleep 1
+	echo 1 > /sys/class/leds/d1/device/run_engine
+
+( 'run_engine' and 'firmware_cb' )
+
+The sequence of running the program data is common.
+
+But each device has own specific register addresses for commands.
+
+To support this, 'run_engine' and 'firmware_cb' are configurable in each driver.
+
+run_engine:
+	Control the selected engine
+firmware_cb:
+	The callback function after loading the firmware is done.
+
+	Chip specific commands for loading and updating program memory.
+
+( Predefined pattern data )
+
+Without the firmware interface, LP55xx driver provides another method for
+loading a LED pattern. That is 'predefined' pattern.
+
+A predefined pattern is defined in the platform data and load it(or them)
+via the sysfs if needed.
+
+To use the predefined pattern concept, 'patterns' and 'num_patterns' should be
+configured.
+
+Example of predefined pattern data::
+
+  /* mode_1: blinking data */
+  static const u8 mode_1[] = {
+		0x40, 0x00, 0x60, 0x00, 0x40, 0xFF, 0x60, 0x00,
+		};
+
+  /* mode_2: always on */
+  static const u8 mode_2[] = { 0x40, 0xFF, };
+
+  struct lp55xx_predef_pattern board_led_patterns[] = {
+	{
+		.r = mode_1,
+		.size_r = ARRAY_SIZE(mode_1),
+	},
+	{
+		.b = mode_2,
+		.size_b = ARRAY_SIZE(mode_2),
+	},
+  }
+
+  struct lp55xx_platform_data lp5562_pdata = {
+  ...
+	.patterns      = board_led_patterns,
+	.num_patterns  = ARRAY_SIZE(board_led_patterns),
+  };
+
+Then, mode_1 and mode_2 can be run via through the sysfs::
+
+  echo 1 > /sys/bus/i2c/devices/xxxx/led_pattern    # red blinking LED pattern
+  echo 2 > /sys/bus/i2c/devices/xxxx/led_pattern    # blue LED always on
+
+To stop running pattern::
+
+  echo 0 > /sys/bus/i2c/devices/xxxx/led_pattern
diff --git a/Documentation/leds/leds-lp55xx.txt b/Documentation/leds/leds-lp55xx.txt
deleted file mode 100644
index e23fa91ea722..000000000000
--- a/Documentation/leds/leds-lp55xx.txt
+++ /dev/null
@@ -1,194 +0,0 @@
-LP5521/LP5523/LP55231/LP5562/LP8501 Common Driver
-=================================================
-
-Authors: Milo(Woogyom) Kim <milo.kim@ti.com>
-
-Description
------------
-LP5521, LP5523/55231, LP5562 and LP8501 have common features as below.
-
-  Register access via the I2C
-  Device initialization/deinitialization
-  Create LED class devices for multiple output channels
-  Device attributes for user-space interface
-  Program memory for running LED patterns
-
-The LP55xx common driver provides these features using exported functions.
-  lp55xx_init_device() / lp55xx_deinit_device()
-  lp55xx_register_leds() / lp55xx_unregister_leds()
-  lp55xx_regsister_sysfs() / lp55xx_unregister_sysfs()
-
-( Driver Structure Data )
-
-In lp55xx common driver, two different data structure is used.
-
-o lp55xx_led
-  control multi output LED channels such as led current, channel index.
-o lp55xx_chip
-  general chip control such like the I2C and platform data.
-
-For example, LP5521 has maximum 3 LED channels.
-LP5523/55231 has 9 output channels.
-
-lp55xx_chip for LP5521 ... lp55xx_led #1
-                           lp55xx_led #2
-                           lp55xx_led #3
-
-lp55xx_chip for LP5523 ... lp55xx_led #1
-                           lp55xx_led #2
-                                 .
-                                 .
-                           lp55xx_led #9
-
-( Chip Dependent Code )
-
-To support device specific configurations, special structure
-'lpxx_device_config' is used.
-
-  Maximum number of channels
-  Reset command, chip enable command
-  Chip specific initialization
-  Brightness control register access
-  Setting LED output current
-  Program memory address access for running patterns
-  Additional device specific attributes
-
-( Firmware Interface )
-
-LP55xx family devices have the internal program memory for running
-various LED patterns.
-This pattern data is saved as a file in the user-land or
-hex byte string is written into the memory through the I2C.
-LP55xx common driver supports the firmware interface.
-
-LP55xx chips have three program engines.
-To load and run the pattern, the programming sequence is following.
-  (1) Select an engine number (1/2/3)
-  (2) Mode change to load
-  (3) Write pattern data into selected area
-  (4) Mode change to run
-
-The LP55xx common driver provides simple interfaces as below.
-select_engine : Select which engine is used for running program
-run_engine    : Start program which is loaded via the firmware interface
-firmware      : Load program data
-
-In case of LP5523, one more command is required, 'enginex_leds'.
-It is used for selecting LED output(s) at each engine number.
-In more details, please refer to 'leds-lp5523.txt'.
-
-For example, run blinking pattern in engine #1 of LP5521
-echo 1 > /sys/bus/i2c/devices/xxxx/select_engine
-echo 1 > /sys/class/firmware/lp5521/loading
-echo "4000600040FF6000" > /sys/class/firmware/lp5521/data
-echo 0 > /sys/class/firmware/lp5521/loading
-echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
-
-For example, run blinking pattern in engine #3 of LP55231
-Two LEDs are configured as pattern output channels.
-echo 3 > /sys/bus/i2c/devices/xxxx/select_engine
-echo 1 > /sys/class/firmware/lp55231/loading
-echo "9d0740ff7e0040007e00a0010000" > /sys/class/firmware/lp55231/data
-echo 0 > /sys/class/firmware/lp55231/loading
-echo "000001100" > /sys/bus/i2c/devices/xxxx/engine3_leds
-echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
-
-To start blinking patterns in engine #2 and #3 simultaneously,
-for idx in 2 3
-do
-  echo $idx > /sys/class/leds/red/device/select_engine
-  sleep 0.1
-  echo 1 > /sys/class/firmware/lp5521/loading
-  echo "4000600040FF6000" > /sys/class/firmware/lp5521/data
-  echo 0 > /sys/class/firmware/lp5521/loading
-done
-echo 1 > /sys/class/leds/red/device/run_engine
-
-Here is another example for LP5523.
-Full LED strings are selected by 'engine2_leds'.
-echo 2 > /sys/bus/i2c/devices/xxxx/select_engine
-echo 1 > /sys/class/firmware/lp5523/loading
-echo "9d80400004ff05ff437f0000" > /sys/class/firmware/lp5523/data
-echo 0 > /sys/class/firmware/lp5523/loading
-echo "111111111" > /sys/bus/i2c/devices/xxxx/engine2_leds
-echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
-
-As soon as 'loading' is set to 0, registered callback is called.
-Inside the callback, the selected engine is loaded and memory is updated.
-To run programmed pattern, 'run_engine' attribute should be enabled.
-
-The pattern sequence of LP8501 is similar to LP5523.
-However pattern data is specific.
-Ex 1) Engine 1 is used
-echo 1 > /sys/bus/i2c/devices/xxxx/select_engine
-echo 1 > /sys/class/firmware/lp8501/loading
-echo "9d0140ff7e0040007e00a001c000" > /sys/class/firmware/lp8501/data
-echo 0 > /sys/class/firmware/lp8501/loading
-echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
-
-Ex 2) Engine 2 and 3 are used at the same time
-echo 2 > /sys/bus/i2c/devices/xxxx/select_engine
-sleep 1
-echo 1 > /sys/class/firmware/lp8501/loading
-echo "9d0140ff7e0040007e00a001c000" > /sys/class/firmware/lp8501/data
-echo 0 > /sys/class/firmware/lp8501/loading
-sleep 1
-echo 3 > /sys/bus/i2c/devices/xxxx/select_engine
-sleep 1
-echo 1 > /sys/class/firmware/lp8501/loading
-echo "9d0340ff7e0040007e00a001c000" > /sys/class/firmware/lp8501/data
-echo 0 > /sys/class/firmware/lp8501/loading
-sleep 1
-echo 1 > /sys/class/leds/d1/device/run_engine
-
-( 'run_engine' and 'firmware_cb' )
-The sequence of running the program data is common.
-But each device has own specific register addresses for commands.
-To support this, 'run_engine' and 'firmware_cb' are configurable in each driver.
-run_engine  : Control the selected engine
-firmware_cb : The callback function after loading the firmware is done.
-              Chip specific commands for loading and updating program memory.
-
-( Predefined pattern data )
-
-Without the firmware interface, LP55xx driver provides another method for
-loading a LED pattern. That is 'predefined' pattern.
-A predefined pattern is defined in the platform data and load it(or them)
-via the sysfs if needed.
-To use the predefined pattern concept, 'patterns' and 'num_patterns' should be
-configured.
-
-  Example of predefined pattern data:
-
-  /* mode_1: blinking data */
-  static const u8 mode_1[] = {
-		0x40, 0x00, 0x60, 0x00, 0x40, 0xFF, 0x60, 0x00,
-		};
-
-  /* mode_2: always on */
-  static const u8 mode_2[] = { 0x40, 0xFF, };
-
-  struct lp55xx_predef_pattern board_led_patterns[] = {
-	{
-		.r = mode_1,
-		.size_r = ARRAY_SIZE(mode_1),
-	},
-	{
-		.b = mode_2,
-		.size_b = ARRAY_SIZE(mode_2),
-	},
-  }
-
-  struct lp55xx_platform_data lp5562_pdata = {
-  ...
-	.patterns      = board_led_patterns,
-	.num_patterns  = ARRAY_SIZE(board_led_patterns),
-  };
-
-Then, mode_1 and mode_2 can be run via through the sysfs.
-
-  echo 1 > /sys/bus/i2c/devices/xxxx/led_pattern    # red blinking LED pattern
-  echo 2 > /sys/bus/i2c/devices/xxxx/led_pattern    # blue LED always on
-
-To stop running pattern,
-  echo 0 > /sys/bus/i2c/devices/xxxx/led_pattern
diff --git a/Documentation/leds/leds-mlxcpld.rst b/Documentation/leds/leds-mlxcpld.rst
new file mode 100644
index 000000000000..528582429e0b
--- /dev/null
+++ b/Documentation/leds/leds-mlxcpld.rst
@@ -0,0 +1,118 @@
+=======================================
+Kernel driver for Mellanox systems LEDs
+=======================================
+
+Provide system LED support for the nex Mellanox systems:
+"msx6710", "msx6720", "msb7700", "msn2700", "msx1410",
+"msn2410", "msb7800", "msn2740", "msn2100".
+
+Description
+-----------
+Driver provides the following LEDs for the systems "msx6710", "msx6720",
+"msb7700", "msn2700", "msx1410", "msn2410", "msb7800", "msn2740":
+
+  - mlxcpld:fan1:green
+  - mlxcpld:fan1:red
+  - mlxcpld:fan2:green
+  - mlxcpld:fan2:red
+  - mlxcpld:fan3:green
+  - mlxcpld:fan3:red
+  - mlxcpld:fan4:green
+  - mlxcpld:fan4:red
+  - mlxcpld:psu:green
+  - mlxcpld:psu:red
+  - mlxcpld:status:green
+  - mlxcpld:status:red
+
+ "status"
+  - CPLD reg offset: 0x20
+  - Bits [3:0]
+
+ "psu"
+  - CPLD reg offset: 0x20
+  - Bits [7:4]
+
+ "fan1"
+  - CPLD reg offset: 0x21
+  - Bits [3:0]
+
+ "fan2"
+  - CPLD reg offset: 0x21
+  - Bits [7:4]
+
+ "fan3"
+  - CPLD reg offset: 0x22
+  - Bits [3:0]
+
+ "fan4"
+  - CPLD reg offset: 0x22
+  - Bits [7:4]
+
+ Color mask for all the above LEDs:
+
+  [bit3,bit2,bit1,bit0] or
+  [bit7,bit6,bit5,bit4]:
+
+	- [0,0,0,0] = LED OFF
+	- [0,1,0,1] = Red static ON
+	- [1,1,0,1] = Green static ON
+	- [0,1,1,0] = Red blink 3Hz
+	- [1,1,1,0] = Green blink 3Hz
+	- [0,1,1,1] = Red blink 6Hz
+	- [1,1,1,1] = Green blink 6Hz
+
+Driver provides the following LEDs for the system "msn2100":
+
+  - mlxcpld:fan:green
+  - mlxcpld:fan:red
+  - mlxcpld:psu1:green
+  - mlxcpld:psu1:red
+  - mlxcpld:psu2:green
+  - mlxcpld:psu2:red
+  - mlxcpld:status:green
+  - mlxcpld:status:red
+  - mlxcpld:uid:blue
+
+ "status"
+  - CPLD reg offset: 0x20
+  - Bits [3:0]
+
+ "fan"
+  - CPLD reg offset: 0x21
+  - Bits [3:0]
+
+ "psu1"
+  - CPLD reg offset: 0x23
+  - Bits [3:0]
+
+ "psu2"
+  - CPLD reg offset: 0x23
+  - Bits [7:4]
+
+ "uid"
+  - CPLD reg offset: 0x24
+  - Bits [3:0]
+
+ Color mask for all the above LEDs, excepted uid:
+
+  [bit3,bit2,bit1,bit0] or
+  [bit7,bit6,bit5,bit4]:
+
+	- [0,0,0,0] = LED OFF
+	- [0,1,0,1] = Red static ON
+	- [1,1,0,1] = Green static ON
+	- [0,1,1,0] = Red blink 3Hz
+	- [1,1,1,0] = Green blink 3Hz
+	- [0,1,1,1] = Red blink 6Hz
+	- [1,1,1,1] = Green blink 6Hz
+
+ Color mask for uid LED:
+  [bit3,bit2,bit1,bit0]:
+
+	- [0,0,0,0] = LED OFF
+	- [1,1,0,1] = Blue static ON
+	- [1,1,1,0] = Blue blink 3Hz
+	- [1,1,1,1] = Blue blink 6Hz
+
+Driver supports HW blinking at 3Hz and 6Hz frequency (50% duty cycle).
+For 3Hz duty cylce is about 167 msec, for 6Hz is about 83 msec.
diff --git a/Documentation/leds/leds-mlxcpld.txt b/Documentation/leds/leds-mlxcpld.txt
deleted file mode 100644
index a0e8fd457117..000000000000
--- a/Documentation/leds/leds-mlxcpld.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-Kernel driver for Mellanox systems LEDs
-=======================================
-
-Provide system LED support for the nex Mellanox systems:
-"msx6710", "msx6720", "msb7700", "msn2700", "msx1410",
-"msn2410", "msb7800", "msn2740", "msn2100".
-
-Description
------------
-Driver provides the following LEDs for the systems "msx6710", "msx6720",
-"msb7700", "msn2700", "msx1410", "msn2410", "msb7800", "msn2740":
-  mlxcpld:fan1:green
-  mlxcpld:fan1:red
-  mlxcpld:fan2:green
-  mlxcpld:fan2:red
-  mlxcpld:fan3:green
-  mlxcpld:fan3:red
-  mlxcpld:fan4:green
-  mlxcpld:fan4:red
-  mlxcpld:psu:green
-  mlxcpld:psu:red
-  mlxcpld:status:green
-  mlxcpld:status:red
-
- "status"
-  CPLD reg offset: 0x20
-  Bits [3:0]
-
- "psu"
-  CPLD reg offset: 0x20
-  Bits [7:4]
-
- "fan1"
-  CPLD reg offset: 0x21
-  Bits [3:0]
-
- "fan2"
-  CPLD reg offset: 0x21
-  Bits [7:4]
-
- "fan3"
-  CPLD reg offset: 0x22
-  Bits [3:0]
-
- "fan4"
-  CPLD reg offset: 0x22
-  Bits [7:4]
-
- Color mask for all the above LEDs:
-  [bit3,bit2,bit1,bit0] or
-  [bit7,bit6,bit5,bit4]:
-	[0,0,0,0] = LED OFF
-	[0,1,0,1] = Red static ON
-	[1,1,0,1] = Green static ON
-	[0,1,1,0] = Red blink 3Hz
-	[1,1,1,0] = Green blink 3Hz
-	[0,1,1,1] = Red blink 6Hz
-	[1,1,1,1] = Green blink 6Hz
-
-Driver provides the following LEDs for the system "msn2100":
-  mlxcpld:fan:green
-  mlxcpld:fan:red
-  mlxcpld:psu1:green
-  mlxcpld:psu1:red
-  mlxcpld:psu2:green
-  mlxcpld:psu2:red
-  mlxcpld:status:green
-  mlxcpld:status:red
-  mlxcpld:uid:blue
-
- "status"
-  CPLD reg offset: 0x20
-  Bits [3:0]
-
- "fan"
-  CPLD reg offset: 0x21
-  Bits [3:0]
-
- "psu1"
-  CPLD reg offset: 0x23
-  Bits [3:0]
-
- "psu2"
-  CPLD reg offset: 0x23
-  Bits [7:4]
-
- "uid"
-  CPLD reg offset: 0x24
-  Bits [3:0]
-
- Color mask for all the above LEDs, excepted uid:
-  [bit3,bit2,bit1,bit0] or
-  [bit7,bit6,bit5,bit4]:
-	[0,0,0,0] = LED OFF
-	[0,1,0,1] = Red static ON
-	[1,1,0,1] = Green static ON
-	[0,1,1,0] = Red blink 3Hz
-	[1,1,1,0] = Green blink 3Hz
-	[0,1,1,1] = Red blink 6Hz
-	[1,1,1,1] = Green blink 6Hz
-
- Color mask for uid LED:
-  [bit3,bit2,bit1,bit0]:
-	[0,0,0,0] = LED OFF
-	[1,1,0,1] = Blue static ON
-	[1,1,1,0] = Blue blink 3Hz
-	[1,1,1,1] = Blue blink 6Hz
-
-Driver supports HW blinking at 3Hz and 6Hz frequency (50% duty cycle).
-For 3Hz duty cylce is about 167 msec, for 6Hz is about 83 msec.
diff --git a/Documentation/leds/ledtrig-oneshot.txt b/Documentation/leds/ledtrig-oneshot.rst
similarity index 90%
rename from Documentation/leds/ledtrig-oneshot.txt
rename to Documentation/leds/ledtrig-oneshot.rst
index fe57474a12e2..69fa3ea1d554 100644
--- a/Documentation/leds/ledtrig-oneshot.txt
+++ b/Documentation/leds/ledtrig-oneshot.rst
@@ -1,3 +1,4 @@
+====================
 One-shot LED Trigger
 ====================
 
@@ -17,27 +18,27 @@ additional "invert" property specifies if the LED has to stay off (normal) or
 on (inverted) when not rearmed.
 
 The trigger can be activated from user space on led class devices as shown
-below:
+below::
 
   echo oneshot > trigger
 
 This adds sysfs attributes to the LED that are documented in:
 Documentation/ABI/testing/sysfs-class-led-trigger-oneshot
 
-Example use-case: network devices, initialization:
+Example use-case: network devices, initialization::
 
   echo oneshot > trigger # set trigger for this led
   echo 33 > delay_on     # blink at 1 / (33 + 33) Hz on continuous traffic
   echo 33 > delay_off
 
-interface goes up:
+interface goes up::
 
   echo 1 > invert # set led as normally-on, turn the led on
 
-packet received/transmitted:
+packet received/transmitted::
 
   echo 1 > shot # led starts blinking, ignored if already blinking
 
-interface goes down
+interface goes down::
 
   echo 0 > invert # set led as normally-off, turn the led off
diff --git a/Documentation/leds/ledtrig-transient.txt b/Documentation/leds/ledtrig-transient.rst
similarity index 81%
rename from Documentation/leds/ledtrig-transient.txt
rename to Documentation/leds/ledtrig-transient.rst
index 3bd38b487df1..d921dc830cd0 100644
--- a/Documentation/leds/ledtrig-transient.txt
+++ b/Documentation/leds/ledtrig-transient.rst
@@ -1,3 +1,4 @@
+=====================
 LED Transient Trigger
 =====================
 
@@ -62,12 +63,13 @@ non-transient state. When driver gets suspended, irrespective of the transient
 state, the LED state changes to LED_OFF.
 
 Transient trigger can be enabled and disabled from user space on led class
-devices, that support this trigger as shown below:
+devices, that support this trigger as shown below::
 
-echo transient > trigger
-echo none > trigger
+	echo transient > trigger
+	echo none > trigger
 
-NOTE: Add a new property trigger state to control the state.
+NOTE:
+	Add a new property trigger state to control the state.
 
 This trigger exports three properties, activate, state, and duration. When
 transient trigger is activated these properties are set to default values.
@@ -79,7 +81,8 @@ transient trigger is activated these properties are set to default values.
 - state allows user to specify a transient state to be held for the specified
   duration.
 
-	activate - one shot timer activate mechanism.
+	activate
+	      - one shot timer activate mechanism.
 		1 when activated, 0 when deactivated.
 		default value is zero when transient trigger is enabled,
 		to allow duration to be set.
@@ -89,12 +92,14 @@ transient trigger is activated these properties are set to default values.
 		deactivated state indicates that there is no active timer
 		running.
 
-	duration - one shot timer value. When activate is set, duration value
+	duration
+	      - one shot timer value. When activate is set, duration value
 		is used to start a timer that runs once. This value doesn't
 		get changed by the trigger unless user does a set via
 		echo new_value > duration
 
-	state - transient state to be held. It has two values 0 or 1. 0 maps
+	state
+	      - transient state to be held. It has two values 0 or 1. 0 maps
 		to LED_OFF and 1 maps to LED_FULL. The specified state is
 		held for the duration of the one shot timer and then the
 		state gets changed to the non-transient state which is the
@@ -114,39 +119,49 @@ When timer expires activate goes back to deactivated state, duration is left
 at the set value to be used when activate is set at a future time. This will
 allow user app to set the time once and activate it to run it once for the
 specified value as needed. When timer expires, state is restored to the
-non-transient state which is the inverse of the transient state.
+non-transient state which is the inverse of the transient state:
 
-	echo 1 > activate - starts timer = duration when duration is not 0.
-	echo 0 > activate - cancels currently running timer.
-	echo n > duration - stores timer value to be used upon next
-                            activate. Currently active timer if
-                            any, continues to run for the specified time.
-	echo 0 > duration - stores timer value to be used upon next
-                            activate. Currently active timer if any,
-                            continues to run for the specified time.
-	echo 1 > state    - stores desired transient state LED_FULL to be
+	=================   ===============================================
+	echo 1 > activate   starts timer = duration when duration is not 0.
+	echo 0 > activate   cancels currently running timer.
+	echo n > duration   stores timer value to be used upon next
+			    activate. Currently active timer if
+			    any, continues to run for the specified time.
+	echo 0 > duration   stores timer value to be used upon next
+			    activate. Currently active timer if any,
+			    continues to run for the specified time.
+	echo 1 > state      stores desired transient state LED_FULL to be
 			    held for the specified duration.
-	echo 0 > state    - stores desired transient state LED_OFF to be
+	echo 0 > state      stores desired transient state LED_OFF to be
 			    held for the specified duration.
+	=================   ===============================================
+
+What is not supported
+=====================
 
-What is not supported:
-======================
 - Timer activation is one shot and extending and/or shortening the timer
   is not supported.
 
-Example use-case 1:
+Examples
+========
+
+use-case 1::
+
 	echo transient > trigger
 	echo n > duration
 	echo 1 > state
-repeat the following step as needed:
+
+repeat the following step as needed::
+
 	echo 1 > activate - start timer = duration to run once
 	echo 1 > activate - start timer = duration to run once
 	echo none > trigger
 
 This trigger is intended to be used for for the following example use cases:
+
  - Control of vibrate (phones, tablets etc.) hardware by user space app.
  - Use of LED by user space app as activity indicator.
  - Use of LED by user space app as a kind of watchdog indicator -- as
-       long as the app is alive, it can keep the LED illuminated, if it dies
-       the LED will be extinguished automatically.
+   long as the app is alive, it can keep the LED illuminated, if it dies
+   the LED will be extinguished automatically.
  - Use by any user space app that needs a transient GPIO output.
diff --git a/Documentation/leds/ledtrig-usbport.txt b/Documentation/leds/ledtrig-usbport.rst
similarity index 86%
rename from Documentation/leds/ledtrig-usbport.txt
rename to Documentation/leds/ledtrig-usbport.rst
index 69f54bfb4789..37c2505bfd57 100644
--- a/Documentation/leds/ledtrig-usbport.txt
+++ b/Documentation/leds/ledtrig-usbport.rst
@@ -1,3 +1,4 @@
+====================
 USB port LED trigger
 ====================
 
@@ -10,14 +11,18 @@ listed as separated entries in a "ports" subdirectory. Selecting is handled by
 echoing "1" to a chosen port.
 
 Please note that this trigger allows selecting multiple USB ports for a single
-LED. This can be useful in two cases:
+LED.
+
+This can be useful in two cases:
 
 1) Device with single USB LED and few physical ports
+====================================================
 
 In such a case LED will be turned on as long as there is at least one connected
 USB device.
 
 2) Device with a physical port handled by few controllers
+=========================================================
 
 Some devices may have one controller per PHY standard. E.g. USB 3.0 physical
 port may be handled by ohci-platform, ehci-platform and xhci-hcd. If there is
@@ -25,14 +30,14 @@ only one LED user will most likely want to assign ports from all 3 hubs.
 
 
 This trigger can be activated from user space on led class devices as shown
-below:
+below::
 
   echo usbport > trigger
 
 This adds sysfs attributes to the LED that are documented in:
 Documentation/ABI/testing/sysfs-class-led-trigger-usbport
 
-Example use-case:
+Example use-case::
 
   echo usbport > trigger
   echo 1 > ports/usb1-port1
diff --git a/Documentation/leds/uleds.txt b/Documentation/leds/uleds.rst
similarity index 95%
rename from Documentation/leds/uleds.txt
rename to Documentation/leds/uleds.rst
index 13e375a580f9..83221098009c 100644
--- a/Documentation/leds/uleds.txt
+++ b/Documentation/leds/uleds.rst
@@ -1,3 +1,4 @@
+==============
 Userspace LEDs
 ==============
 
@@ -10,12 +11,12 @@ Usage
 
 When the driver is loaded, a character device is created at /dev/uleds. To
 create a new LED class device, open /dev/uleds and write a uleds_user_dev
-structure to it (found in kernel public header file linux/uleds.h).
+structure to it (found in kernel public header file linux/uleds.h)::
 
     #define LED_MAX_NAME_SIZE 64
 
     struct uleds_user_dev {
-        char name[LED_MAX_NAME_SIZE];
+	char name[LED_MAX_NAME_SIZE];
     };
 
 A new LED class device will be created with the name given. The name can be
diff --git a/MAINTAINERS b/MAINTAINERS
index ddd526efcb46..6696779c0826 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10045,7 +10045,7 @@ L:	linux-leds@vger.kernel.org
 S:	Supported
 F:	drivers/leds/leds-mlxcpld.c
 F:	drivers/leds/leds-mlxreg.c
-F:	Documentation/leds/leds-mlxcpld.txt
+F:	Documentation/leds/leds-mlxcpld.rst
 
 MELLANOX PLATFORM DRIVER
 M:	Vadim Pasternak <vadimp@mellanox.com>
diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig
index 23cc85e2e0e5..24e36eef95d3 100644
--- a/drivers/leds/trigger/Kconfig
+++ b/drivers/leds/trigger/Kconfig
@@ -14,7 +14,7 @@ config LEDS_TRIGGER_TIMER
 	  This allows LEDs to be controlled by a programmable timer
 	  via sysfs. Some LED hardware can be programmed to start
 	  blinking the LED without any further software interaction.
-	  For more details read Documentation/leds/leds-class.txt.
+	  For more details read Documentation/leds/leds-class.rst.
 
 	  If unsure, say Y.
 
diff --git a/drivers/leds/trigger/ledtrig-transient.c b/drivers/leds/trigger/ledtrig-transient.c
index a80bb82aacc2..80635183fac8 100644
--- a/drivers/leds/trigger/ledtrig-transient.c
+++ b/drivers/leds/trigger/ledtrig-transient.c
@@ -3,7 +3,7 @@
 // LED Kernel Transient Trigger
 //
 // Transient trigger allows one shot timer activation. Please refer to
-// Documentation/leds/ledtrig-transient.txt for details
+// Documentation/leds/ledtrig-transient.rst for details
 // Copyright (C) 2012 Shuah Khan <shuahkhan@gmail.com>
 //
 // Based on Richard Purdie's ledtrig-timer.c and Atsushi Nemoto's
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index 1f4a4d9f80b4..21b13e75b0a9 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -905,7 +905,7 @@ config NETFILTER_XT_TARGET_LED
 	    echo netfilter-ssh > /sys/class/leds/<ledname>/trigger
 
 	  For more information on the LEDs available on your system, see
-	  Documentation/leds/leds-class.txt
+	  Documentation/leds/leds-class.rst
 
 config NETFILTER_XT_TARGET_LOG
 	tristate "LOG target support"
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 62/79] docs: laptops: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (57 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 61/79] docs: leds: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-05-06  8:59     ` Andy Shevchenko
  2019-04-22 13:27   ` [PATCH v2 63/79] docs: iio: " Mauro Carvalho Chehab
                     ` (18 subsequent siblings)
  77 siblings, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Mattia Dongili, Arnd Bergmann,
	Greg Kroah-Hartman, Darren Hart, Andy Shevchenko,
	platform-driver-x86

Rename the laptops documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/ABI/testing/sysfs-block-device  |   2 +-
 .../ABI/testing/sysfs-platform-asus-laptop    |   2 +-
 .../admin-guide/kernel-parameters.txt         |   2 +-
 .../{asus-laptop.txt => asus-laptop.rst}      |  91 ++--
 ...otection.txt => disk-shock-protection.rst} |  32 +-
 Documentation/laptops/index.rst               |  17 +
 .../{laptop-mode.txt => laptop-mode.rst}      | 509 +++++++++---------
 .../{sony-laptop.txt => sony-laptop.rst}      |  58 +-
 .../laptops/{sonypi.txt => sonypi.rst}        |  28 +-
 .../{thinkpad-acpi.txt => thinkpad-acpi.rst}  | 363 ++++++++-----
 .../{toshiba_haps.txt => toshiba_haps.rst}    |  47 +-
 Documentation/sysctl/vm.txt                   |   4 +-
 MAINTAINERS                                   |   2 +-
 drivers/char/Kconfig                          |   2 +-
 drivers/platform/x86/Kconfig                  |   4 +-
 15 files changed, 660 insertions(+), 503 deletions(-)
 rename Documentation/laptops/{asus-laptop.txt => asus-laptop.rst} (84%)
 rename Documentation/laptops/{disk-shock-protection.txt => disk-shock-protection.rst} (91%)
 create mode 100644 Documentation/laptops/index.rst
 rename Documentation/laptops/{laptop-mode.txt => laptop-mode.rst} (62%)
 rename Documentation/laptops/{sony-laptop.txt => sony-laptop.rst} (85%)
 rename Documentation/laptops/{sonypi.txt => sonypi.rst} (87%)
 rename Documentation/laptops/{thinkpad-acpi.txt => thinkpad-acpi.rst} (89%)
 rename Documentation/laptops/{toshiba_haps.txt => toshiba_haps.rst} (60%)

diff --git a/Documentation/ABI/testing/sysfs-block-device b/Documentation/ABI/testing/sysfs-block-device
index 82ef6eab042d..0d57bbb4fddc 100644
--- a/Documentation/ABI/testing/sysfs-block-device
+++ b/Documentation/ABI/testing/sysfs-block-device
@@ -45,7 +45,7 @@ Description:
 		- Values below -2 are rejected with -EINVAL
 
 		For more information, see
-		Documentation/laptops/disk-shock-protection.txt
+		Documentation/laptops/disk-shock-protection.rst
 
 
 What:		/sys/block/*/device/ncq_prio_enable
diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop
index cd9d667c3da2..d67fa4bafa70 100644
--- a/Documentation/ABI/testing/sysfs-platform-asus-laptop
+++ b/Documentation/ABI/testing/sysfs-platform-asus-laptop
@@ -31,7 +31,7 @@ Description:
 		To control the LED display, use the following :
 		    echo 0x0T000DDD > /sys/devices/platform/asus_laptop/
 		where T control the 3 letters display, and DDD the 3 digits display.
-		The DDD table can be found in Documentation/laptops/asus-laptop.txt
+		The DDD table can be found in Documentation/laptops/asus-laptop.rst
 
 What:		/sys/devices/platform/asus_laptop/bluetooth
 Date:		January 2007
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index bf6d34fb7180..65d66010b134 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4268,7 +4268,7 @@
 			Format: <integer>
 
 	sonypi.*=	[HW] Sony Programmable I/O Control Device driver
-			See Documentation/laptops/sonypi.txt
+			See Documentation/laptops/sonypi.rst
 
 	spectre_v2=	[X86] Control mitigation of Spectre variant 2
 			(indirect branch speculation) vulnerability.
diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.rst
similarity index 84%
rename from Documentation/laptops/asus-laptop.txt
rename to Documentation/laptops/asus-laptop.rst
index 5f2858712aa0..4c263f89a22b 100644
--- a/Documentation/laptops/asus-laptop.txt
+++ b/Documentation/laptops/asus-laptop.rst
@@ -1,6 +1,9 @@
+==================
 Asus Laptop Extras
+==================
 
 Version 0.1
+
 August 6, 2009
 
 Corentin Chary <corentincj@iksaif.net>
@@ -10,11 +13,12 @@ http://acpi4asus.sf.net/
  It may also support some MEDION, JVC or VICTOR laptops (such as MEDION 9675 or
  VICTOR XP7210 for example). It makes all the extra buttons generate input
  events (like keyboards).
+
  On some models adds support for changing the display brightness and output,
  switching the LCD backlight on and off, and most importantly, allows you to
  blink those fancy LEDs intended for reporting mail and wireless status.
 
-This driver supercedes the old asus_acpi driver.
+This driver supersedes the old asus_acpi driver.
 
 Requirements
 ------------
@@ -49,7 +53,7 @@ Usage
   see some lines like this :
 
       Asus Laptop Extras version 0.42
-        L2D model detected.
+        - L2D model detected.
 
   If it is not the output you have on your laptop, send it (and the laptop's
   DSDT) to me.
@@ -68,9 +72,12 @@ Usage
 LEDs
 ----
 
-  You can modify LEDs be echoing values to /sys/class/leds/asus::*/brightness :
+  You can modify LEDs be echoing values to `/sys/class/leds/asus/*/brightness`::
+
     echo 1 >  /sys/class/leds/asus::mail/brightness
+
   will switch the mail LED on.
+
   You can also know if they are on/off by reading their content and use
   kernel triggers like disk-activity or heartbeat.
 
@@ -81,7 +88,7 @@ Backlight
   /sys/class/backlight/asus-laptop/. Brightness Values are between 0 and 15.
 
 Wireless devices
----------------
+----------------
 
   You can turn the internal Bluetooth adapter on/off with the bluetooth entry
   (only on models with Bluetooth). This usually controls the associated LED.
@@ -93,18 +100,20 @@ Display switching
   Note: the display switching code is currently considered EXPERIMENTAL.
 
   Switching works for the following models:
-    L3800C
-    A2500H
-    L5800C
-    M5200N
-    W1000N (albeit with some glitches)
-    M6700R
-    A6JC
-    F3J
+
+    - L3800C
+    - A2500H
+    - L5800C
+    - M5200N
+    - W1000N (albeit with some glitches)
+    - M6700R
+    - A6JC
+    - F3J
 
   Switching doesn't work for the following:
-    M3700N
-    L2X00D (locks the laptop under certain conditions)
+
+    - M3700N
+    - L2X00D (locks the laptop under certain conditions)
 
   To switch the displays, echo values from 0 to 15 to
   /sys/devices/platform/asus-laptop/display. The significance of those values
@@ -113,48 +122,51 @@ Display switching
   +-------+-----+-----+-----+-----+-----+
   | Bin   | Val | DVI | TV  | CRT | LCD |
   +-------+-----+-----+-----+-----+-----+
-  + 0000  +   0 +     +     +     +     +
+  | 0000  |   0 |     |     |     |     |
   +-------+-----+-----+-----+-----+-----+
-  + 0001  +   1 +     +     +     +  X  +
+  | 0001  |   1 |     |     |     |  X  |
   +-------+-----+-----+-----+-----+-----+
-  + 0010  +   2 +     +     +  X  +     +
+  | 0010  |   2 |     |     |  X  |     |
   +-------+-----+-----+-----+-----+-----+
-  + 0011  +   3 +     +     +  X  +  X  +
+  | 0011  |   3 |     |     |  X  |  X  |
   +-------+-----+-----+-----+-----+-----+
-  + 0100  +   4 +     +  X  +     +     +
+  | 0100  |   4 |     |  X  |     |     |
   +-------+-----+-----+-----+-----+-----+
-  + 0101  +   5 +     +  X  +     + X   +
+  | 0101  |   5 |     |  X  |     | X   |
   +-------+-----+-----+-----+-----+-----+
-  + 0110  +   6 +     +  X  +  X  +     +
+  | 0110  |   6 |     |  X  |  X  |     |
   +-------+-----+-----+-----+-----+-----+
-  + 0111  +   7 +     +  X  +  X  +  X  +
+  | 0111  |   7 |     |  X  |  X  |  X  |
   +-------+-----+-----+-----+-----+-----+
-  + 1000  +   8 +  X  +     +     +     +
+  | 1000  |   8 |  X  |     |     |     |
   +-------+-----+-----+-----+-----+-----+
-  + 1001  +   9 +  X  +     +     +  X  +
+  | 1001  |   9 |  X  |     |     |  X  |
   +-------+-----+-----+-----+-----+-----+
-  + 1010  +  10 +  X  +     +  X  +     +
+  | 1010  |  10 |  X  |     |  X  |     |
   +-------+-----+-----+-----+-----+-----+
-  + 1011  +  11 +  X  +     +  X  +  X  +
+  | 1011  |  11 |  X  |     |  X  |  X  |
   +-------+-----+-----+-----+-----+-----+
-  + 1100  +  12 +  X  +  X  +     +     +
+  | 1100  |  12 |  X  |  X  |     |     |
   +-------+-----+-----+-----+-----+-----+
-  + 1101  +  13 +  X  +  X  +     +  X  +
+  | 1101  |  13 |  X  |  X  |     |  X  |
   +-------+-----+-----+-----+-----+-----+
-  + 1110  +  14 +  X  +  X  +  X  +     +
+  | 1110  |  14 |  X  |  X  |  X  |     |
   +-------+-----+-----+-----+-----+-----+
-  + 1111  +  15 +  X  +  X  +  X  +  X  +
+  | 1111  |  15 |  X  |  X  |  X  |  X  |
   +-------+-----+-----+-----+-----+-----+
 
   In most cases, the appropriate displays must be plugged in for the above
   combinations to work. TV-Out may need to be initialized at boot time.
 
   Debugging:
+
   1) Check whether the Fn+F8 key:
+
      a) does not lock the laptop (try a boot with noapic / nolapic if it does)
      b) generates events (0x6n, where n is the value corresponding to the
         configuration above)
      c) actually works
+
      Record the disp value at every configuration.
   2) Echo values from 0 to 15 to /sys/devices/platform/asus-laptop/display.
      Record its value, note any change. If nothing changes, try a broader range,
@@ -164,7 +176,7 @@ Display switching
 
   Note: on some machines (e.g. L3C), after the module has been loaded, only 0x6n
   events are generated and no actual switching occurs. In such a case, a line
-  like:
+  like::
 
     echo $((10#$arg-60)) > /sys/devices/platform/asus-laptop/display
 
@@ -180,15 +192,16 @@ LED display
   several items of information.
 
   LED display works for the following models:
-    W1000N
-    W1J
 
-  To control the LED display, use the following :
+    - W1000N
+    - W1J
+
+  To control the LED display, use the following::
 
     echo 0x0T000DDD > /sys/devices/platform/asus-laptop/
 
   where T control the 3 letters display, and DDD the 3 digits display,
-  according to the tables below.
+  according to the tables below::
 
          DDD (digits)
          000 to 999 = display digits
@@ -208,8 +221,8 @@ LED display
   For example "echo 0x01000001 >/sys/devices/platform/asus-laptop/ledd"
   would display "DVD001".
 
-Driver options:
----------------
+Driver options
+--------------
 
  Options can be passed to the asus-laptop driver using the standard
  module argument syntax (<param>=<value> when passing the option to the
@@ -219,6 +232,7 @@ Driver options:
 	     wapf: WAPF defines the behavior of the Fn+Fx wlan key
 		   The significance of values is yet to be found, but
 		   most of the time:
+
 		   - 0x0 should do nothing
 		   - 0x1 should allow to control the device with Fn+Fx key.
 		   - 0x4 should send an ACPI event (0x88) while pressing the Fn+Fx key
@@ -237,7 +251,7 @@ Unsupported models
  - ASUS L7300G
  - ASUS L8400
 
-Patches, Errors, Questions:
+Patches, Errors, Questions
 --------------------------
 
  I appreciate any success or failure
@@ -253,5 +267,6 @@ Patches, Errors, Questions:
  Any other comments or patches are also more than welcome.
 
  acpi4asus-user@lists.sourceforge.net
+
  http://sourceforge.net/projects/acpi4asus
 
diff --git a/Documentation/laptops/disk-shock-protection.txt b/Documentation/laptops/disk-shock-protection.rst
similarity index 91%
rename from Documentation/laptops/disk-shock-protection.txt
rename to Documentation/laptops/disk-shock-protection.rst
index 0e6ba2663834..e97c5f78d8c3 100644
--- a/Documentation/laptops/disk-shock-protection.txt
+++ b/Documentation/laptops/disk-shock-protection.rst
@@ -1,17 +1,18 @@
+==========================
 Hard disk shock protection
 ==========================
 
 Author: Elias Oltmanns <eo@nebensachen.de>
+
 Last modified: 2008-10-03
 
 
-0. Contents
------------
+.. 0. Contents
 
-1. Intro
-2. The interface
-3. References
-4. CREDITS
+   1. Intro
+   2. The interface
+   3. References
+   4. CREDITS
 
 
 1. Intro
@@ -36,8 +37,8 @@ that).
 ----------------
 
 For each ATA device, the kernel exports the file
-block/*/device/unload_heads in sysfs (here assumed to be mounted under
-/sys). Access to /sys/block/*/device/unload_heads is denied with
+`block/*/device/unload_heads` in sysfs (here assumed to be mounted under
+/sys). Access to `/sys/block/*/device/unload_heads` is denied with
 -EOPNOTSUPP if the device does not support the unload feature.
 Otherwise, writing an integer value to this file will take the heads
 of the respective drive off the platter and block all I/O operations
@@ -54,18 +55,18 @@ cancel a previously set timeout and resume normal operation
 immediately by specifying a timeout of 0. Values below -2 are rejected
 with -EINVAL (see below for the special meaning of -1 and -2). If the
 timeout specified for a recent head park request has not yet expired,
-reading from /sys/block/*/device/unload_heads will report the number
+reading from `/sys/block/*/device/unload_heads` will report the number
 of milliseconds remaining until normal operation will be resumed;
 otherwise, reading the unload_heads attribute will return 0.
 
 For example, do the following in order to park the heads of drive
-/dev/sda and stop all I/O operations for five seconds:
+/dev/sda and stop all I/O operations for five seconds::
 
-# echo 5000 > /sys/block/sda/device/unload_heads
+	# echo 5000 > /sys/block/sda/device/unload_heads
 
-A simple
+A simple::
 
-# cat /sys/block/sda/device/unload_heads
+	# cat /sys/block/sda/device/unload_heads
 
 will show you how many milliseconds are left before normal operation
 will be resumed.
@@ -112,9 +113,9 @@ unload_heads attribute. If you know that your device really does
 support the unload feature (for instance, because the vendor of your
 laptop or the hard drive itself told you so), then you can tell the
 kernel to enable the usage of this feature for that drive by writing
-the special value -1 to the unload_heads attribute:
+the special value -1 to the unload_heads attribute::
 
-# echo -1 > /sys/block/sda/device/unload_heads
+	# echo -1 > /sys/block/sda/device/unload_heads
 
 will enable the feature for /dev/sda, and giving -2 instead of -1 will
 disable it again.
@@ -135,6 +136,7 @@ for use. Please feel free to add projects that have been the victims
 of my ignorance.
 
 - http://www.thinkwiki.org/wiki/HDAPS
+
   See this page for information about Linux support of the hard disk
   active protection system as implemented in IBM/Lenovo Thinkpads.
 
diff --git a/Documentation/laptops/index.rst b/Documentation/laptops/index.rst
new file mode 100644
index 000000000000..001a30910d09
--- /dev/null
+++ b/Documentation/laptops/index.rst
@@ -0,0 +1,17 @@
+:orphan:
+
+==============
+Laptop Drivers
+==============
+
+.. toctree::
+   :maxdepth: 1
+
+   asus-laptop
+   disk-shock-protection
+   laptop-mode
+   lg-laptop
+   sony-laptop
+   sonypi
+   thinkpad-acpi
+   toshiba_haps
diff --git a/Documentation/laptops/laptop-mode.txt b/Documentation/laptops/laptop-mode.rst
similarity index 62%
rename from Documentation/laptops/laptop-mode.txt
rename to Documentation/laptops/laptop-mode.rst
index 1c707fc9b141..c984c4262f2e 100644
--- a/Documentation/laptops/laptop-mode.txt
+++ b/Documentation/laptops/laptop-mode.rst
@@ -1,8 +1,11 @@
+===============================================
 How to conserve battery power using laptop-mode
------------------------------------------------
+===============================================
 
 Document Author: Bart Samwel (bart@samwel.tk)
+
 Date created: January 2, 2004
+
 Last modified: December 06, 2004
 
 Introduction
@@ -12,17 +15,16 @@ Laptop mode is used to minimize the time that the hard disk needs to be spun up,
 to conserve battery power on laptops. It has been reported to cause significant
 power savings.
 
-Contents
---------
+.. Contents
 
-* Introduction
-* Installation
-* Caveats
-* The Details
-* Tips & Tricks
-* Control script
-* ACPI integration
-* Monitoring tool
+   * Introduction
+   * Installation
+   * Caveats
+   * The Details
+   * Tips & Tricks
+   * Control script
+   * ACPI integration
+   * Monitoring tool
 
 
 Installation
@@ -33,7 +35,7 @@ or anything. Simply install all the files included in this document, and
 laptop mode will automatically be started when you're on battery. For
 your convenience, a tarball containing an installer can be downloaded at:
 
-http://www.samwel.tk/laptop_mode/laptop_mode/
+	http://www.samwel.tk/laptop_mode/laptop_mode/
 
 To configure laptop mode, you need to edit the configuration file, which is
 located in /etc/default/laptop-mode on Debian-based systems, or in
@@ -209,7 +211,7 @@ Tips & Tricks
   this on powerbooks too. I hope that this is a piece of information that
   might be useful to the Laptop Mode patch or its users."
 
-* In syslog.conf, you can prefix entries with a dash ``-'' to omit syncing the
+* In syslog.conf, you can prefix entries with a dash `-` to omit syncing the
   file after every logging. When you're using laptop-mode and your disk doesn't
   spin down, this is a likely culprit.
 
@@ -233,83 +235,82 @@ configuration file
 It should be installed as /etc/default/laptop-mode on Debian, and as
 /etc/sysconfig/laptop-mode on Red Hat, SUSE, Mandrake, and other work-alikes.
 
---------------------CONFIG FILE BEGIN-------------------------------------------
-# Maximum time, in seconds, of hard drive spindown time that you are
-# comfortable with. Worst case, it's possible that you could lose this
-# amount of work if your battery fails you while in laptop mode.
-#MAX_AGE=600
+Config file::
 
-# Automatically disable laptop mode when the number of minutes of battery
-# that you have left goes below this threshold.
-MINIMUM_BATTERY_MINUTES=10
+  # Maximum time, in seconds, of hard drive spindown time that you are
+  # comfortable with. Worst case, it's possible that you could lose this
+  # amount of work if your battery fails you while in laptop mode.
+  #MAX_AGE=600
 
-# Read-ahead, in 512-byte sectors. You can spin down the disk while playing MP3/OGG
-# by setting the disk readahead to 8MB (READAHEAD=16384). Effectively, the disk
-# will read a complete MP3 at once, and will then spin down while the MP3/OGG is
-# playing.
-#READAHEAD=4096
+  # Automatically disable laptop mode when the number of minutes of battery
+  # that you have left goes below this threshold.
+  MINIMUM_BATTERY_MINUTES=10
 
-# Shall we remount journaled fs. with appropriate commit interval? (1=yes)
-#DO_REMOUNTS=1
+  # Read-ahead, in 512-byte sectors. You can spin down the disk while playing MP3/OGG
+  # by setting the disk readahead to 8MB (READAHEAD=16384). Effectively, the disk
+  # will read a complete MP3 at once, and will then spin down while the MP3/OGG is
+  # playing.
+  #READAHEAD=4096
 
-# And shall we add the "noatime" option to that as well? (1=yes)
-#DO_REMOUNT_NOATIME=1
+  # Shall we remount journaled fs. with appropriate commit interval? (1=yes)
+  #DO_REMOUNTS=1
 
-# Dirty synchronous ratio.  At this percentage of dirty pages the process
-# which
-# calls write() does its own writeback
-#DIRTY_RATIO=40
+  # And shall we add the "noatime" option to that as well? (1=yes)
+  #DO_REMOUNT_NOATIME=1
 
-#
-# Allowed dirty background ratio, in percent.  Once DIRTY_RATIO has been
-# exceeded, the kernel will wake flusher threads which will then reduce the
-# amount of dirty memory to dirty_background_ratio.  Set this nice and low,
-# so once some writeout has commenced, we do a lot of it.
-#
-#DIRTY_BACKGROUND_RATIO=5
+  # Dirty synchronous ratio.  At this percentage of dirty pages the process
+  # which
+  # calls write() does its own writeback
+  #DIRTY_RATIO=40
 
-# kernel default dirty buffer age
-#DEF_AGE=30
-#DEF_UPDATE=5
-#DEF_DIRTY_BACKGROUND_RATIO=10
-#DEF_DIRTY_RATIO=40
-#DEF_XFS_AGE_BUFFER=15
-#DEF_XFS_SYNC_INTERVAL=30
-#DEF_XFS_BUFD_INTERVAL=1
+  #
+  # Allowed dirty background ratio, in percent.  Once DIRTY_RATIO has been
+  # exceeded, the kernel will wake flusher threads which will then reduce the
+  # amount of dirty memory to dirty_background_ratio.  Set this nice and low,
+  # so once some writeout has commenced, we do a lot of it.
+  #
+  #DIRTY_BACKGROUND_RATIO=5
 
-# This must be adjusted manually to the value of HZ in the running kernel
-# on 2.4, until the XFS people change their 2.4 external interfaces to work in
-# centisecs. This can be automated, but it's a work in progress that still
-# needs# some fixes. On 2.6 kernels, XFS uses USER_HZ instead of HZ for
-# external interfaces, and that is currently always set to 100. So you don't
-# need to change this on 2.6.
-#XFS_HZ=100
+  # kernel default dirty buffer age
+  #DEF_AGE=30
+  #DEF_UPDATE=5
+  #DEF_DIRTY_BACKGROUND_RATIO=10
+  #DEF_DIRTY_RATIO=40
+  #DEF_XFS_AGE_BUFFER=15
+  #DEF_XFS_SYNC_INTERVAL=30
+  #DEF_XFS_BUFD_INTERVAL=1
 
-# Should the maximum CPU frequency be adjusted down while on battery?
-# Requires CPUFreq to be setup.
-# See Documentation/admin-guide/pm/cpufreq.rst for more info
-#DO_CPU=0
+  # This must be adjusted manually to the value of HZ in the running kernel
+  # on 2.4, until the XFS people change their 2.4 external interfaces to work in
+  # centisecs. This can be automated, but it's a work in progress that still
+  # needs# some fixes. On 2.6 kernels, XFS uses USER_HZ instead of HZ for
+  # external interfaces, and that is currently always set to 100. So you don't
+  # need to change this on 2.6.
+  #XFS_HZ=100
 
-# When on battery what is the maximum CPU speed that the system should
-# use? Legal values are "slowest" for the slowest speed that your
-# CPU is able to operate at, or a value listed in:
-# /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies
-# Only applicable if DO_CPU=1.
-#CPU_MAXFREQ=slowest
+  # Should the maximum CPU frequency be adjusted down while on battery?
+  # Requires CPUFreq to be setup.
+  # See Documentation/admin-guide/pm/cpufreq.rst for more info
+  #DO_CPU=0
 
-# Idle timeout for your hard drive (man hdparm for valid values, -S option)
-# Default is 2 hours on AC (AC_HD=244) and 20 seconds for battery (BATT_HD=4).
-#AC_HD=244
-#BATT_HD=4
+  # When on battery what is the maximum CPU speed that the system should
+  # use? Legal values are "slowest" for the slowest speed that your
+  # CPU is able to operate at, or a value listed in:
+  # /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies
+  # Only applicable if DO_CPU=1.
+  #CPU_MAXFREQ=slowest
 
-# The drives for which to adjust the idle timeout. Separate them by a space,
-# e.g. HD="/dev/hda /dev/hdb".
-#HD="/dev/hda"
+  # Idle timeout for your hard drive (man hdparm for valid values, -S option)
+  # Default is 2 hours on AC (AC_HD=244) and 20 seconds for battery (BATT_HD=4).
+  #AC_HD=244
+  #BATT_HD=4
 
-# Set the spindown timeout on a hard drive?
-#DO_HD=1
+  # The drives for which to adjust the idle timeout. Separate them by a space,
+  # e.g. HD="/dev/hda /dev/hdb".
+  #HD="/dev/hda"
 
---------------------CONFIG FILE END---------------------------------------------
+  # Set the spindown timeout on a hard drive?
+  #DO_HD=1
 
 
 Control script
@@ -318,125 +319,126 @@ Control script
 Please note that this control script works for the Linux 2.4 and 2.6 series (thanks
 to Kiko Piris).
 
---------------------CONTROL SCRIPT BEGIN----------------------------------------
-#!/bin/bash
+Control script::
 
-# start or stop laptop_mode, best run by a power management daemon when
-# ac gets connected/disconnected from a laptop
-#
-# install as /sbin/laptop_mode
-#
-# Contributors to this script:   Kiko Piris
-#				 Bart Samwel
-#				 Micha Feigin
-#				 Andrew Morton
-#				 Herve Eychenne
-#				 Dax Kelson
-#
-# Original Linux 2.4 version by: Jens Axboe
+  #!/bin/bash
 
-#############################################################################
+  # start or stop laptop_mode, best run by a power management daemon when
+  # ac gets connected/disconnected from a laptop
+  #
+  # install as /sbin/laptop_mode
+  #
+  # Contributors to this script:   Kiko Piris
+  #				 Bart Samwel
+  #				 Micha Feigin
+  #				 Andrew Morton
+  #				 Herve Eychenne
+  #				 Dax Kelson
+  #
+  # Original Linux 2.4 version by: Jens Axboe
 
-# Source config
-if [ -f /etc/default/laptop-mode ] ; then
+  #############################################################################
+
+  # Source config
+  if [ -f /etc/default/laptop-mode ] ; then
 	# Debian
 	. /etc/default/laptop-mode
-elif [ -f /etc/sysconfig/laptop-mode ] ; then
+  elif [ -f /etc/sysconfig/laptop-mode ] ; then
 	# Others
-        . /etc/sysconfig/laptop-mode
-fi
+          . /etc/sysconfig/laptop-mode
+  fi
 
-# Don't raise an error if the config file is incomplete
-# set defaults instead:
+  # Don't raise an error if the config file is incomplete
+  # set defaults instead:
 
-# Maximum time, in seconds, of hard drive spindown time that you are
-# comfortable with. Worst case, it's possible that you could lose this
-# amount of work if your battery fails you while in laptop mode.
-MAX_AGE=${MAX_AGE:-'600'}
+  # Maximum time, in seconds, of hard drive spindown time that you are
+  # comfortable with. Worst case, it's possible that you could lose this
+  # amount of work if your battery fails you while in laptop mode.
+  MAX_AGE=${MAX_AGE:-'600'}
 
-# Read-ahead, in kilobytes
-READAHEAD=${READAHEAD:-'4096'}
+  # Read-ahead, in kilobytes
+  READAHEAD=${READAHEAD:-'4096'}
 
-# Shall we remount journaled fs. with appropriate commit interval? (1=yes)
-DO_REMOUNTS=${DO_REMOUNTS:-'1'}
+  # Shall we remount journaled fs. with appropriate commit interval? (1=yes)
+  DO_REMOUNTS=${DO_REMOUNTS:-'1'}
 
-# And shall we add the "noatime" option to that as well? (1=yes)
-DO_REMOUNT_NOATIME=${DO_REMOUNT_NOATIME:-'1'}
+  # And shall we add the "noatime" option to that as well? (1=yes)
+  DO_REMOUNT_NOATIME=${DO_REMOUNT_NOATIME:-'1'}
 
-# Shall we adjust the idle timeout on a hard drive?
-DO_HD=${DO_HD:-'1'}
+  # Shall we adjust the idle timeout on a hard drive?
+  DO_HD=${DO_HD:-'1'}
 
-# Adjust idle timeout on which hard drive?
-HD="${HD:-'/dev/hda'}"
+  # Adjust idle timeout on which hard drive?
+  HD="${HD:-'/dev/hda'}"
 
-# spindown time for HD (hdparm -S values)
-AC_HD=${AC_HD:-'244'}
-BATT_HD=${BATT_HD:-'4'}
+  # spindown time for HD (hdparm -S values)
+  AC_HD=${AC_HD:-'244'}
+  BATT_HD=${BATT_HD:-'4'}
 
-# Dirty synchronous ratio.  At this percentage of dirty pages the process which
-# calls write() does its own writeback
-DIRTY_RATIO=${DIRTY_RATIO:-'40'}
+  # Dirty synchronous ratio.  At this percentage of dirty pages the process which
+  # calls write() does its own writeback
+  DIRTY_RATIO=${DIRTY_RATIO:-'40'}
 
-# cpu frequency scaling
-# See Documentation/admin-guide/pm/cpufreq.rst for more info
-DO_CPU=${CPU_MANAGE:-'0'}
-CPU_MAXFREQ=${CPU_MAXFREQ:-'slowest'}
+  # cpu frequency scaling
+  # See Documentation/admin-guide/pm/cpufreq.rst for more info
+  DO_CPU=${CPU_MANAGE:-'0'}
+  CPU_MAXFREQ=${CPU_MAXFREQ:-'slowest'}
 
-#
-# Allowed dirty background ratio, in percent.  Once DIRTY_RATIO has been
-# exceeded, the kernel will wake flusher threads which will then reduce the
-# amount of dirty memory to dirty_background_ratio.  Set this nice and low,
-# so once some writeout has commenced, we do a lot of it.
-#
-DIRTY_BACKGROUND_RATIO=${DIRTY_BACKGROUND_RATIO:-'5'}
+  #
+  # Allowed dirty background ratio, in percent.  Once DIRTY_RATIO has been
+  # exceeded, the kernel will wake flusher threads which will then reduce the
+  # amount of dirty memory to dirty_background_ratio.  Set this nice and low,
+  # so once some writeout has commenced, we do a lot of it.
+  #
+  DIRTY_BACKGROUND_RATIO=${DIRTY_BACKGROUND_RATIO:-'5'}
 
-# kernel default dirty buffer age
-DEF_AGE=${DEF_AGE:-'30'}
-DEF_UPDATE=${DEF_UPDATE:-'5'}
-DEF_DIRTY_BACKGROUND_RATIO=${DEF_DIRTY_BACKGROUND_RATIO:-'10'}
-DEF_DIRTY_RATIO=${DEF_DIRTY_RATIO:-'40'}
-DEF_XFS_AGE_BUFFER=${DEF_XFS_AGE_BUFFER:-'15'}
-DEF_XFS_SYNC_INTERVAL=${DEF_XFS_SYNC_INTERVAL:-'30'}
-DEF_XFS_BUFD_INTERVAL=${DEF_XFS_BUFD_INTERVAL:-'1'}
+  # kernel default dirty buffer age
+  DEF_AGE=${DEF_AGE:-'30'}
+  DEF_UPDATE=${DEF_UPDATE:-'5'}
+  DEF_DIRTY_BACKGROUND_RATIO=${DEF_DIRTY_BACKGROUND_RATIO:-'10'}
+  DEF_DIRTY_RATIO=${DEF_DIRTY_RATIO:-'40'}
+  DEF_XFS_AGE_BUFFER=${DEF_XFS_AGE_BUFFER:-'15'}
+  DEF_XFS_SYNC_INTERVAL=${DEF_XFS_SYNC_INTERVAL:-'30'}
+  DEF_XFS_BUFD_INTERVAL=${DEF_XFS_BUFD_INTERVAL:-'1'}
 
-# This must be adjusted manually to the value of HZ in the running kernel
-# on 2.4, until the XFS people change their 2.4 external interfaces to work in
-# centisecs. This can be automated, but it's a work in progress that still needs
-# some fixes. On 2.6 kernels, XFS uses USER_HZ instead of HZ for external
-# interfaces, and that is currently always set to 100. So you don't need to
-# change this on 2.6.
-XFS_HZ=${XFS_HZ:-'100'}
+  # This must be adjusted manually to the value of HZ in the running kernel
+  # on 2.4, until the XFS people change their 2.4 external interfaces to work in
+  # centisecs. This can be automated, but it's a work in progress that still needs
+  # some fixes. On 2.6 kernels, XFS uses USER_HZ instead of HZ for external
+  # interfaces, and that is currently always set to 100. So you don't need to
+  # change this on 2.6.
+  XFS_HZ=${XFS_HZ:-'100'}
 
-#############################################################################
+  #############################################################################
 
-KLEVEL="$(uname -r |
-             {
+  KLEVEL="$(uname -r |
+               {
 	       IFS='.' read a b c
 	       echo $a.$b
 	     }
-)"
-case "$KLEVEL" in
+  )"
+  case "$KLEVEL" in
 	"2.4"|"2.6")
 		;;
 	*)
 		echo "Unhandled kernel version: $KLEVEL ('uname -r' = '$(uname -r)')" >&2
 		exit 1
 		;;
-esac
+  esac
 
-if [ ! -e /proc/sys/vm/laptop_mode ] ; then
+  if [ ! -e /proc/sys/vm/laptop_mode ] ; then
 	echo "Kernel is not patched with laptop_mode patch." >&2
 	exit 1
-fi
+  fi
 
-if [ ! -w /proc/sys/vm/laptop_mode ] ; then
+  if [ ! -w /proc/sys/vm/laptop_mode ] ; then
 	echo "You do not have enough privileges to enable laptop_mode." >&2
 	exit 1
-fi
+  fi
 
-# Remove an option (the first parameter) of the form option=<number> from
-# a mount options string (the rest of the parameters).
-parse_mount_opts () {
+  # Remove an option (the first parameter) of the form option=<number> from
+  # a mount options string (the rest of the parameters).
+  parse_mount_opts () {
 	OPT="$1"
 	shift
 	echo ",$*," | sed		\
@@ -444,11 +446,11 @@ parse_mount_opts () {
 	 -e 's/,,*/,/g'			\
 	 -e 's/^,//'			\
 	 -e 's/,$//'
-}
+  }
 
-# Remove an option (the first parameter) without any arguments from
-# a mount option string (the rest of the parameters).
-parse_nonumber_mount_opts () {
+  # Remove an option (the first parameter) without any arguments from
+  # a mount option string (the rest of the parameters).
+  parse_nonumber_mount_opts () {
 	OPT="$1"
 	shift
 	echo ",$*," | sed		\
@@ -456,20 +458,20 @@ parse_nonumber_mount_opts () {
 	 -e 's/,,*/,/g'			\
 	 -e 's/^,//'			\
 	 -e 's/,$//'
-}
+  }
 
-# Find out the state of a yes/no option (e.g. "atime"/"noatime") in
-# fstab for a given filesystem, and use this state to replace the
-# value of the option in another mount options string. The device
-# is the first argument, the option name the second, and the default
-# value the third. The remainder is the mount options string.
-#
-# Example:
-# parse_yesno_opts_wfstab /dev/hda1 atime atime defaults,noatime
-#
-# If fstab contains, say, "rw" for this filesystem, then the result
-# will be "defaults,atime".
-parse_yesno_opts_wfstab () {
+  # Find out the state of a yes/no option (e.g. "atime"/"noatime") in
+  # fstab for a given filesystem, and use this state to replace the
+  # value of the option in another mount options string. The device
+  # is the first argument, the option name the second, and the default
+  # value the third. The remainder is the mount options string.
+  #
+  # Example:
+  # parse_yesno_opts_wfstab /dev/hda1 atime atime defaults,noatime
+  #
+  # If fstab contains, say, "rw" for this filesystem, then the result
+  # will be "defaults,atime".
+  parse_yesno_opts_wfstab () {
 	L_DEV="$1"
 	OPT="$2"
 	DEF_OPT="$3"
@@ -491,21 +493,21 @@ parse_yesno_opts_wfstab () {
 		# option not specified in fstab -- choose the default.
 		echo "$PARSEDOPTS1,$DEF_OPT"
 	fi
-}
+  }
 
-# Find out the state of a numbered option (e.g. "commit=NNN") in
-# fstab for a given filesystem, and use this state to replace the
-# value of the option in another mount options string. The device
-# is the first argument, and the option name the second. The
-# remainder is the mount options string in which the replacement
-# must be done.
-#
-# Example:
-# parse_mount_opts_wfstab /dev/hda1 commit defaults,commit=7
-#
-# If fstab contains, say, "commit=3,rw" for this filesystem, then the
-# result will be "rw,commit=3".
-parse_mount_opts_wfstab () {
+  # Find out the state of a numbered option (e.g. "commit=NNN") in
+  # fstab for a given filesystem, and use this state to replace the
+  # value of the option in another mount options string. The device
+  # is the first argument, and the option name the second. The
+  # remainder is the mount options string in which the replacement
+  # must be done.
+  #
+  # Example:
+  # parse_mount_opts_wfstab /dev/hda1 commit defaults,commit=7
+  #
+  # If fstab contains, say, "commit=3,rw" for this filesystem, then the
+  # result will be "rw,commit=3".
+  parse_mount_opts_wfstab () {
 	L_DEV="$1"
 	OPT="$2"
 	shift 2
@@ -523,9 +525,9 @@ parse_mount_opts_wfstab () {
 		# option not specified in fstab: set it to 0
 		echo "$PARSEDOPTS1,$OPT=0"
 	fi
-}
+  }
 
-deduce_fstype () {
+  deduce_fstype () {
 	MP="$1"
 	# My root filesystem unfortunately has
 	# type "unknown" in /etc/mtab. If we encounter
@@ -538,13 +540,13 @@ deduce_fstype () {
 			exit 0
 		fi
 	done
-}
+  }
 
-if [ $DO_REMOUNT_NOATIME -eq 1 ] ; then
+  if [ $DO_REMOUNT_NOATIME -eq 1 ] ; then
 	NOATIME_OPT=",noatime"
-fi
+  fi
 
-case "$1" in
+  case "$1" in
 	start)
 		AGE=$((100*$MAX_AGE))
 		XFS_AGE=$(($XFS_HZ*$MAX_AGE))
@@ -687,10 +689,9 @@ case "$1" in
 		exit 1
 		;;
 
-esac
+  esac
 
-exit 0
---------------------CONTROL SCRIPT END------------------------------------------
+  exit 0
 
 
 ACPI integration
@@ -701,78 +702,76 @@ kick off the laptop_mode script and run hdparm. The part that
 automatically disables laptop mode when the battery is low was
 written by Jan Topinski.
 
------------------/etc/acpi/events/ac_adapter BEGIN------------------------------
-event=ac_adapter
-action=/etc/acpi/actions/ac.sh %e
-----------------/etc/acpi/events/ac_adapter END---------------------------------
+/etc/acpi/events/ac_adapter::
 
+	event=ac_adapter
+	action=/etc/acpi/actions/ac.sh %e
 
------------------/etc/acpi/events/battery BEGIN---------------------------------
-event=battery.*
-action=/etc/acpi/actions/battery.sh %e
-----------------/etc/acpi/events/battery END------------------------------------
+/etc/acpi/events/battery::
 
+	event=battery.*
+	action=/etc/acpi/actions/battery.sh %e
 
-----------------/etc/acpi/actions/ac.sh BEGIN-----------------------------------
-#!/bin/bash
+/etc/acpi/actions/ac.sh::
 
-# ac on/offline event handler
+  #!/bin/bash
 
-status=`awk '/^state: / { print $2 }' /proc/acpi/ac_adapter/$2/state`
+  # ac on/offline event handler
 
-case $status in
-        "on-line")
-                /sbin/laptop_mode stop
-                exit 0
-        ;;
-        "off-line")
-                /sbin/laptop_mode start
-                exit 0
-        ;;
-esac
----------------------------/etc/acpi/actions/ac.sh END--------------------------
+  status=`awk '/^state: / { print $2 }' /proc/acpi/ac_adapter/$2/state`
 
+  case $status in
+          "on-line")
+                  /sbin/laptop_mode stop
+                  exit 0
+          ;;
+          "off-line")
+                  /sbin/laptop_mode start
+                  exit 0
+          ;;
+  esac
 
----------------------------/etc/acpi/actions/battery.sh BEGIN-------------------
-#! /bin/bash
 
-# Automatically disable laptop mode when the battery almost runs out.
+/etc/acpi/actions/battery.sh::
 
-BATT_INFO=/proc/acpi/battery/$2/state
+  #! /bin/bash
 
-if [[ -f /proc/sys/vm/laptop_mode ]]
-then
-   LM=`cat /proc/sys/vm/laptop_mode`
-   if [[ $LM -gt 0 ]]
-   then
-     if [[ -f $BATT_INFO ]]
+  # Automatically disable laptop mode when the battery almost runs out.
+
+  BATT_INFO=/proc/acpi/battery/$2/state
+
+  if [[ -f /proc/sys/vm/laptop_mode ]]
+  then
+     LM=`cat /proc/sys/vm/laptop_mode`
+     if [[ $LM -gt 0 ]]
      then
-        # Source the config file only now that we know we need
-        if [ -f /etc/default/laptop-mode ] ; then
-                # Debian
-                . /etc/default/laptop-mode
-        elif [ -f /etc/sysconfig/laptop-mode ] ; then
-                # Others
-                . /etc/sysconfig/laptop-mode
-        fi
-        MINIMUM_BATTERY_MINUTES=${MINIMUM_BATTERY_MINUTES:-'10'}
+       if [[ -f $BATT_INFO ]]
+       then
+          # Source the config file only now that we know we need
+          if [ -f /etc/default/laptop-mode ] ; then
+                  # Debian
+                  . /etc/default/laptop-mode
+          elif [ -f /etc/sysconfig/laptop-mode ] ; then
+                  # Others
+                  . /etc/sysconfig/laptop-mode
+          fi
+          MINIMUM_BATTERY_MINUTES=${MINIMUM_BATTERY_MINUTES:-'10'}
 
-        ACTION="`cat $BATT_INFO | grep charging | cut -c 26-`"
-        if [[ ACTION -eq "discharging" ]]
-        then
-           PRESENT_RATE=`cat $BATT_INFO | grep "present rate:" | sed  "s/.* \([0-9][0-9]* \).*/\1/" `
-           REMAINING=`cat $BATT_INFO | grep "remaining capacity:" | sed  "s/.* \([0-9][0-9]* \).*/\1/" `
-        fi
-        if (($REMAINING * 60 / $PRESENT_RATE < $MINIMUM_BATTERY_MINUTES))
-        then
-           /sbin/laptop_mode stop
-        fi
-     else
-       logger -p daemon.warning "You are using laptop mode and your battery interface $BATT_INFO is missing. This may lead to loss of data when the battery runs out. Check kernel ACPI support and /proc/acpi/battery folder, and edit /etc/acpi/battery.sh to set BATT_INFO to the correct path."
+          ACTION="`cat $BATT_INFO | grep charging | cut -c 26-`"
+          if [[ ACTION -eq "discharging" ]]
+          then
+             PRESENT_RATE=`cat $BATT_INFO | grep "present rate:" | sed  "s/.* \([0-9][0-9]* \).*/\1/" `
+             REMAINING=`cat $BATT_INFO | grep "remaining capacity:" | sed  "s/.* \([0-9][0-9]* \).*/\1/" `
+          fi
+          if (($REMAINING * 60 / $PRESENT_RATE < $MINIMUM_BATTERY_MINUTES))
+          then
+             /sbin/laptop_mode stop
+          fi
+       else
+         logger -p daemon.warning "You are using laptop mode and your battery interface $BATT_INFO is missing. This may lead to loss of data when the battery runs out. Check kernel ACPI support and /proc/acpi/battery folder, and edit /etc/acpi/battery.sh to set BATT_INFO to the correct path."
+       fi
      fi
-   fi
-fi
----------------------------/etc/acpi/actions/battery.sh END--------------------
+  fi
 
 
 Monitoring tool
diff --git a/Documentation/laptops/sony-laptop.txt b/Documentation/laptops/sony-laptop.rst
similarity index 85%
rename from Documentation/laptops/sony-laptop.txt
rename to Documentation/laptops/sony-laptop.rst
index 978b1e615155..9edcc7f6612f 100644
--- a/Documentation/laptops/sony-laptop.txt
+++ b/Documentation/laptops/sony-laptop.rst
@@ -1,7 +1,9 @@
+=========================================
 Sony Notebook Control Driver (SNC) Readme
------------------------------------------
-	Copyright (C) 2004- 2005 Stelian Pop <stelian@popies.net>
-	Copyright (C) 2007 Mattia Dongili <malattia@linux.it>
+=========================================
+
+	- Copyright (C) 2004- 2005 Stelian Pop <stelian@popies.net>
+	- Copyright (C) 2007 Mattia Dongili <malattia@linux.it>
 
 This mini-driver drives the SNC and SPIC device present in the ACPI BIOS of the
 Sony Vaio laptops. This driver mixes both devices functions under the same
@@ -10,6 +12,7 @@ obsoleted by sony-laptop now.
 
 Fn keys (hotkeys):
 ------------------
+
 Some models report hotkeys through the SNC or SPIC devices, such events are
 reported both through the ACPI subsystem as acpi events and through the INPUT
 subsystem. See the logs of /proc/bus/input/devices to find out what those
@@ -28,11 +31,14 @@ If your laptop model supports it, you will find sysfs files in the
 /sys/class/backlight/sony/
 directory. You will be able to query and set the current screen
 brightness:
+
+	======================	=========================================
 	brightness		get/set screen brightness (an integer
 				between 0 and 7)
 	actual_brightness	reading from this file will query the HW
 				to get real brightness value
 	max_brightness		the maximum brightness value
+	======================	=========================================
 
 
 Platform specific:
@@ -45,6 +51,8 @@ You then read/write integer values from/to those files by using
 standard UNIX tools.
 
 The files are:
+
+	======================	==========================================
 	brightness_default	screen brightness which will be set
 				when the laptop will be rebooted
 	cdpower			power on/off the internal CD drive
@@ -53,21 +61,39 @@ The files are:
 				(only in debug mode)
 	bluetoothpower		power on/off the internal bluetooth device
 	fanspeed		get/set the fan speed
+	======================	==========================================
 
 Note that some files may be missing if they are not supported
 by your particular laptop model.
 
-Example usage:
+Example usage::
+
 	# echo "1" > /sys/devices/platform/sony-laptop/brightness_default
-sets the lowest screen brightness for the next and later reboots,
+
+sets the lowest screen brightness for the next and later reboots
+
+::
+
 	# echo "8" > /sys/devices/platform/sony-laptop/brightness_default
-sets the highest screen brightness for the next and later reboots,
+
+sets the highest screen brightness for the next and later reboots
+
+::
+
 	# cat /sys/devices/platform/sony-laptop/brightness_default
-retrieves the value.
+
+retrieves the value
+
+::
 
 	# echo "0" > /sys/devices/platform/sony-laptop/audiopower
-powers off the sound card,
+
+powers off the sound card
+
+::
+
 	# echo "1" > /sys/devices/platform/sony-laptop/audiopower
+
 powers on the sound card.
 
 
@@ -76,7 +102,8 @@ RFkill control:
 More recent Vaio models expose a consistent set of ACPI methods to
 control radio frequency emitting devices. If you are a lucky owner of
 such a laptop you will find the necessary rfkill devices under
-/sys/class/rfkill. Check those starting with sony-* in
+/sys/class/rfkill. Check those starting with sony-* in::
+
 	# grep . /sys/class/rfkill/*/{state,name}
 
 
@@ -88,26 +115,29 @@ you are not afraid of any side effects doing strange things with
 your ACPI BIOS could have on your laptop), load the driver and
 pass the option 'debug=1'.
 
-REPEAT: DON'T DO THIS IF YOU DON'T LIKE RISKY BUSINESS.
+REPEAT:
+	**DON'T DO THIS IF YOU DON'T LIKE RISKY BUSINESS.**
 
 In your kernel logs you will find the list of all ACPI methods
 the SNC device has on your laptop.
 
 * For new models you will see a long list of meaningless method names,
-reading the DSDT table source should reveal that:
+  reading the DSDT table source should reveal that:
+
 (1) the SNC device uses an internal capability lookup table
 (2) SN00 is used to find values in the lookup table
 (3) SN06 and SN07 are used to call into the real methods based on
     offsets you can obtain iterating the table using SN00
 (4) SN02 used to enable events.
+
 Some values in the capability lookup table are more or less known, see
 the code for all sony_call_snc_handle calls, others are more obscure.
 
 * For old models you can see the GCDP/GCDP methods used to pwer on/off
-the CD drive, but there are others and they are usually different from
-model to model.
+  the CD drive, but there are others and they are usually different from
+  model to model.
 
-I HAVE NO IDEA WHAT THOSE METHODS DO.
+**I HAVE NO IDEA WHAT THOSE METHODS DO.**
 
 The sony-laptop driver creates, for some of those methods (the most
 current ones found on several Vaio models), an entry under
diff --git a/Documentation/laptops/sonypi.txt b/Documentation/laptops/sonypi.rst
similarity index 87%
rename from Documentation/laptops/sonypi.txt
rename to Documentation/laptops/sonypi.rst
index 606bdb9ce036..2a1975ed7ee4 100644
--- a/Documentation/laptops/sonypi.txt
+++ b/Documentation/laptops/sonypi.rst
@@ -1,11 +1,13 @@
+==================================================
 Sony Programmable I/O Control Device Driver Readme
---------------------------------------------------
-	Copyright (C) 2001-2004 Stelian Pop <stelian@popies.net>
-	Copyright (C) 2001-2002 Alcôve <www.alcove.com>
-	Copyright (C) 2001 Michael Ashley <m.ashley@unsw.edu.au>
-	Copyright (C) 2001 Junichi Morita <jun1m@mars.dti.ne.jp>
-	Copyright (C) 2000 Takaya Kinjo <t-kinjo@tc4.so-net.ne.jp>
-	Copyright (C) 2000 Andrew Tridgell <tridge@samba.org>
+==================================================
+
+	- Copyright (C) 2001-2004 Stelian Pop <stelian@popies.net>
+	- Copyright (C) 2001-2002 Alcôve <www.alcove.com>
+	- Copyright (C) 2001 Michael Ashley <m.ashley@unsw.edu.au>
+	- Copyright (C) 2001 Junichi Morita <jun1m@mars.dti.ne.jp>
+	- Copyright (C) 2000 Takaya Kinjo <t-kinjo@tc4.so-net.ne.jp>
+	- Copyright (C) 2000 Andrew Tridgell <tridge@samba.org>
 
 This driver enables access to the Sony Programmable I/O Control Device which
 can be found in many Sony Vaio laptops. Some newer Sony laptops (seems to be
@@ -14,6 +16,7 @@ sonypi device and are not supported at all by this driver.
 
 It will give access (through a user space utility) to some events those laptops
 generate, like:
+
 	- jogdial events (the small wheel on the side of Vaios)
 	- capture button events (only on Vaio Picturebook series)
 	- Fn keys
@@ -49,6 +52,7 @@ module argument syntax (<param>=<value> when passing the option to the
 module or sonypi.<param>=<value> on the kernel boot line when sonypi is
 statically linked into the kernel). Those options are:
 
+	=============== =======================================================
 	minor: 		minor number of the misc device /dev/sonypi,
 			default is -1 (automatic allocation, see /proc/misc
 			or kernel logs)
@@ -86,6 +90,8 @@ statically linked into the kernel). Those options are:
 			will be tried. You can use the following bits to
 			construct your own event mask (from
 			drivers/char/sonypi.h):
+
+				========================	======
 				SONYPI_JOGGER_MASK 		0x0001
 				SONYPI_CAPTURE_MASK 		0x0002
 				SONYPI_FNKEY_MASK 		0x0004
@@ -100,22 +106,24 @@ statically linked into the kernel). Those options are:
 				SONYPI_MEMORYSTICK_MASK		0x0800
 				SONYPI_BATTERY_MASK		0x1000
 				SONYPI_WIRELESS_MASK		0x2000
+				========================	======
 
 	useinput:	if set (which is the default) two input devices are
 			created, one which interprets the jogdial events as
 			mouse events, the other one which acts like a
 			keyboard reporting the pressing of the special keys.
+	=============== =======================================================
 
 Module use:
 -----------
 
 In order to automatically load the sonypi module on use, you can put those
-lines a configuration file in /etc/modprobe.d/:
+lines a configuration file in /etc/modprobe.d/::
 
 	alias char-major-10-250 sonypi
 	options sonypi minor=250
 
-This supposes the use of minor 250 for the sonypi device:
+This supposes the use of minor 250 for the sonypi device::
 
 	# mknod /dev/sonypi c 10 250
 
@@ -148,5 +156,5 @@ Bugs:
 	  http://www.acc.umu.se/~erikw/program/smartdimmer-0.1.tar.bz2
 
 	- since all development was done by reverse engineering, there is
-	  _absolutely no guarantee_ that this driver will not crash your
+	  *absolutely no guarantee* that this driver will not crash your
 	  laptop. Permanently.
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.rst
similarity index 89%
rename from Documentation/laptops/thinkpad-acpi.txt
rename to Documentation/laptops/thinkpad-acpi.rst
index 65719384fc36..d0f0d16c21b9 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.rst
@@ -1,12 +1,15 @@
-		     ThinkPad ACPI Extras Driver
+===========================
+ThinkPad ACPI Extras Driver
+===========================
 
-                            Version 0.25
-                        October 16th,  2013
+Version 0.25
 
-               Borislav Deianov <borislav@users.sf.net>
-             Henrique de Moraes Holschuh <hmh@hmh.eng.br>
-                      http://ibm-acpi.sf.net/
+October 16th,  2013
 
+- Borislav Deianov <borislav@users.sf.net>
+- Henrique de Moraes Holschuh <hmh@hmh.eng.br>
+
+http://ibm-acpi.sf.net/
 
 This is a Linux driver for the IBM and Lenovo ThinkPad laptops. It
 supports various features of these laptops which are accessible
@@ -91,7 +94,8 @@ yet ready or stabilized, it is expected that this interface will change,
 and any and all userspace programs must deal with it.
 
 
-Notes about the sysfs interface:
+Notes about the sysfs interface
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Unlike what was done with the procfs interface, correctness when talking
 to the sysfs interfaces will be enforced, as will correctness in the
@@ -129,6 +133,7 @@ Driver version
 --------------
 
 procfs: /proc/acpi/ibm/driver
+
 sysfs driver attribute: version
 
 The driver name and version. No commands can be written to this file.
@@ -141,9 +146,13 @@ sysfs driver attribute: interface_version
 
 Version of the thinkpad-acpi sysfs interface, as an unsigned long
 (output in hex format: 0xAAAABBCC), where:
-	AAAA - major revision
-	BB - minor revision
-	CC - bugfix revision
+
+	AAAA
+	  - major revision
+	BB
+	  - minor revision
+	CC
+	  - bugfix revision
 
 The sysfs interface version changelog for the driver can be found at the
 end of this document.  Changes to the sysfs interface done by the kernel
@@ -170,6 +179,7 @@ Hot keys
 --------
 
 procfs: /proc/acpi/ibm/hotkey
+
 sysfs device attribute: hotkey_*
 
 In a ThinkPad, the ACPI HKEY handler is responsible for communicating
@@ -181,7 +191,7 @@ firmware will behave in many situations.
 The driver enables the HKEY ("hot key") event reporting automatically
 when loaded, and disables it when it is removed.
 
-The driver will report HKEY events in the following format:
+The driver will report HKEY events in the following format::
 
 	ibm/hotkey HKEY 00000080 0000xxxx
 
@@ -217,9 +227,10 @@ ThinkPads, it is still possible to support some extra hotkeys by
 polling the "CMOS NVRAM" at least 10 times per second.  The driver
 attempts to enables this functionality automatically when required.
 
-procfs notes:
+procfs notes
+^^^^^^^^^^^^
 
-The following commands can be written to the /proc/acpi/ibm/hotkey file:
+The following commands can be written to the /proc/acpi/ibm/hotkey file::
 
 	echo 0xffffffff > /proc/acpi/ibm/hotkey -- enable all hot keys
 	echo 0 > /proc/acpi/ibm/hotkey -- disable all possible hot keys
@@ -227,7 +238,7 @@ The following commands can be written to the /proc/acpi/ibm/hotkey file:
 	echo reset > /proc/acpi/ibm/hotkey -- restore the recommended mask
 
 The following commands have been deprecated and will cause the kernel
-to log a warning:
+to log a warning::
 
 	echo enable > /proc/acpi/ibm/hotkey -- does nothing
 	echo disable > /proc/acpi/ibm/hotkey -- returns an error
@@ -237,7 +248,8 @@ maintain maximum bug-to-bug compatibility, it does not report any masks,
 nor does it allow one to manipulate the hot key mask when the firmware
 does not support masks at all, even if NVRAM polling is in use.
 
-sysfs notes:
+sysfs notes
+^^^^^^^^^^^
 
 	hotkey_bios_enabled:
 		DEPRECATED, WILL BE REMOVED SOON.
@@ -349,7 +361,8 @@ sysfs notes:
 
 		This attribute has poll()/select() support.
 
-input layer notes:
+input layer notes
+^^^^^^^^^^^^^^^^^
 
 A Hot key is mapped to a single input layer EV_KEY event, possibly
 followed by an EV_MSC MSC_SCAN event that shall contain that key's scan
@@ -362,11 +375,13 @@ remapping KEY_UNKNOWN keys.
 
 The events are available in an input device, with the following id:
 
-	Bus:		BUS_HOST
-	vendor:		0x1014 (PCI_VENDOR_ID_IBM)  or
+	==============  ==============================
+	Bus		BUS_HOST
+	vendor		0x1014 (PCI_VENDOR_ID_IBM)  or
 			0x17aa (PCI_VENDOR_ID_LENOVO)
-	product:	0x5054 ("TP")
-	version:	0x4101
+	product		0x5054 ("TP")
+	version		0x4101
+	==============  ==============================
 
 The version will have its LSB incremented if the keymap changes in a
 backwards-compatible way.  The MSB shall always be 0x41 for this input
@@ -380,9 +395,10 @@ backwards-compatible change for this input device.
 
 Thinkpad-acpi Hot Key event map (version 0x4101):
 
+=======	=======	==============	==============================================
 ACPI	Scan
 event	code	Key		Notes
-
+=======	=======	==============	==============================================
 0x1001	0x00	FN+F1		-
 
 0x1002	0x01	FN+F2		IBM: battery (rare)
@@ -426,7 +442,9 @@ event	code	Key		Notes
 				or toggle screen expand
 
 0x1009	0x08	FN+F9		-
-	..	..		..
+
+...	...	...		...
+
 0x100B	0x0A	FN+F11		-
 
 0x100C	0x0B	FN+F12		Sleep to disk.  You are always
@@ -480,8 +498,11 @@ event	code	Key		Notes
 0x1018	0x17	THINKPAD	ThinkPad/Access IBM/Lenovo key
 
 0x1019	0x18	unknown
-..	..	..
+
+...	...	...
+
 0x1020	0x1F	unknown
+=======	=======	==============	==============================================
 
 The ThinkPad firmware does not allow one to differentiate when most hot
 keys are pressed or released (either that, or we don't know how to, yet).
@@ -499,14 +520,17 @@ generate input device EV_KEY events.
 In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW
 events for switches:
 
+==============	==============================================
 SW_RFKILL_ALL	T60 and later hardware rfkill rocker switch
 SW_TABLET_MODE	Tablet ThinkPads HKEY events 0x5009 and 0x500A
+==============	==============================================
 
-Non hotkey ACPI HKEY event map:
--------------------------------
+Non hotkey ACPI HKEY event map
+------------------------------
 
 Events that are never propagated by the driver:
 
+======		==================================================
 0x2304		System is waking up from suspend to undock
 0x2305		System is waking up from suspend to eject bay
 0x2404		System is waking up from hibernation to undock
@@ -519,10 +543,12 @@ Events that are never propagated by the driver:
 0x6000		KEYBOARD: Numlock key pressed
 0x6005		KEYBOARD: Fn key pressed (TO BE VERIFIED)
 0x7000		Radio Switch may have changed state
+======		==================================================
 
 
 Events that are propagated by the driver to userspace:
 
+======		=====================================================
 0x2313		ALARM: System is waking up from suspend because
 		the battery is nearly empty
 0x2413		ALARM: System is waking up from hibernation because
@@ -544,6 +570,7 @@ Events that are propagated by the driver to userspace:
 0x6040		Nvidia Optimus/AC adapter related (TO BE VERIFIED)
 0x60C0		X1 Yoga 2016, Tablet mode status changed
 0x60F0		Thermal Transformation changed (GMTS, Windows)
+======		=====================================================
 
 Battery nearly empty alarms are a last resort attempt to get the
 operating system to hibernate or shutdown cleanly (0x2313), or shutdown
@@ -562,7 +589,8 @@ cycle, or a system shutdown.  Obviously, something is very wrong if this
 happens.
 
 
-Brightness hotkey notes:
+Brightness hotkey notes
+^^^^^^^^^^^^^^^^^^^^^^^
 
 Don't mess with the brightness hotkeys in a Thinkpad.  If you want
 notifications for OSD, use the sysfs backlight class event support.
@@ -579,7 +607,9 @@ Bluetooth
 ---------
 
 procfs: /proc/acpi/ibm/bluetooth
+
 sysfs device attribute: bluetooth_enable (deprecated)
+
 sysfs rfkill class: switch "tpacpi_bluetooth_sw"
 
 This feature shows the presence and current state of a ThinkPad
@@ -588,22 +618,25 @@ Bluetooth device in the internal ThinkPad CDC slot.
 If the ThinkPad supports it, the Bluetooth state is stored in NVRAM,
 so it is kept across reboots and power-off.
 
-Procfs notes:
+Procfs notes
+^^^^^^^^^^^^
 
-If Bluetooth is installed, the following commands can be used:
+If Bluetooth is installed, the following commands can be used::
 
 	echo enable > /proc/acpi/ibm/bluetooth
 	echo disable > /proc/acpi/ibm/bluetooth
 
-Sysfs notes:
+Sysfs notes
+^^^^^^^^^^^
 
 	If the Bluetooth CDC card is installed, it can be enabled /
 	disabled through the "bluetooth_enable" thinkpad-acpi device
 	attribute, and its current status can also be queried.
 
 	enable:
-		0: disables Bluetooth / Bluetooth is disabled
-		1: enables Bluetooth / Bluetooth is enabled.
+
+		- 0: disables Bluetooth / Bluetooth is disabled
+		- 1: enables Bluetooth / Bluetooth is enabled.
 
 	Note: this interface has been superseded by the	generic rfkill
 	class.  It has been deprecated, and it will be removed in year
@@ -617,7 +650,7 @@ Video output control -- /proc/acpi/ibm/video
 --------------------------------------------
 
 This feature allows control over the devices used for video output -
-LCD, CRT or DVI (if available). The following commands are available:
+LCD, CRT or DVI (if available). The following commands are available::
 
 	echo lcd_enable > /proc/acpi/ibm/video
 	echo lcd_disable > /proc/acpi/ibm/video
@@ -630,9 +663,10 @@ LCD, CRT or DVI (if available). The following commands are available:
 	echo expand_toggle > /proc/acpi/ibm/video
 	echo video_switch > /proc/acpi/ibm/video
 
-NOTE: Access to this feature is restricted to processes owning the
-CAP_SYS_ADMIN capability for safety reasons, as it can interact badly
-enough with some versions of X.org to crash it.
+NOTE:
+  Access to this feature is restricted to processes owning the
+  CAP_SYS_ADMIN capability for safety reasons, as it can interact badly
+  enough with some versions of X.org to crash it.
 
 Each video output device can be enabled or disabled individually.
 Reading /proc/acpi/ibm/video shows the status of each device.
@@ -665,18 +699,21 @@ ThinkLight control
 ------------------
 
 procfs: /proc/acpi/ibm/light
+
 sysfs attributes: as per LED class, for the "tpacpi::thinklight" LED
 
-procfs notes:
+procfs notes
+^^^^^^^^^^^^
 
 The ThinkLight status can be read and set through the procfs interface.  A
 few models which do not make the status available will show the ThinkLight
-status as "unknown". The available commands are:
+status as "unknown". The available commands are::
 
 	echo on  > /proc/acpi/ibm/light
 	echo off > /proc/acpi/ibm/light
 
-sysfs notes:
+sysfs notes
+^^^^^^^^^^^
 
 The ThinkLight sysfs interface is documented by the LED class
 documentation, in Documentation/leds/leds-class.rst.  The ThinkLight LED name
@@ -691,6 +728,7 @@ CMOS/UCMS control
 -----------------
 
 procfs: /proc/acpi/ibm/cmos
+
 sysfs device attribute: cmos_command
 
 This feature is mostly used internally by the ACPI firmware to keep the legacy
@@ -707,16 +745,16 @@ The range of valid cmos command numbers is 0 to 21, but not all have an
 effect and the behavior varies from model to model.  Here is the behavior
 on the X40 (tpb is the ThinkPad Buttons utility):
 
-	0 - Related to "Volume down" key press
-	1 - Related to "Volume up" key press
-	2 - Related to "Mute on" key press
-	3 - Related to "Access IBM" key press
-	4 - Related to "LCD brightness up" key press
-	5 - Related to "LCD brightness down" key press
-	11 - Related to "toggle screen expansion" key press/function
-	12 - Related to "ThinkLight on"
-	13 - Related to "ThinkLight off"
-	14 - Related to "ThinkLight" key press (toggle ThinkLight)
+	- 0 - Related to "Volume down" key press
+	- 1 - Related to "Volume up" key press
+	- 2 - Related to "Mute on" key press
+	- 3 - Related to "Access IBM" key press
+	- 4 - Related to "LCD brightness up" key press
+	- 5 - Related to "LCD brightness down" key press
+	- 11 - Related to "toggle screen expansion" key press/function
+	- 12 - Related to "ThinkLight on"
+	- 13 - Related to "ThinkLight off"
+	- 14 - Related to "ThinkLight" key press (toggle ThinkLight)
 
 The cmos command interface is prone to firmware split-brain problems, as
 in newer ThinkPads it is just a compatibility layer.  Do not use it, it is
@@ -748,9 +786,10 @@ are aware of the consequences are welcome to enabling it.
 Audio mute and microphone mute LEDs are supported, but currently not
 visible to userspace. They are used by the snd-hda-intel audio driver.
 
-procfs notes:
+procfs notes
+^^^^^^^^^^^^
 
-The available commands are:
+The available commands are::
 
 	echo '<LED number> on' >/proc/acpi/ibm/led
 	echo '<LED number> off' >/proc/acpi/ibm/led
@@ -760,23 +799,24 @@ The <LED number> range is 0 to 15. The set of LEDs that can be
 controlled varies from model to model. Here is the common ThinkPad
 mapping:
 
-	0 - power
-	1 - battery (orange)
-	2 - battery (green)
-	3 - UltraBase/dock
-	4 - UltraBay
-	5 - UltraBase battery slot
-	6 - (unknown)
-	7 - standby
-	8 - dock status 1
-	9 - dock status 2
-	10, 11 - (unknown)
-	12 - thinkvantage
-	13, 14, 15 - (unknown)
+	- 0 - power
+	- 1 - battery (orange)
+	- 2 - battery (green)
+	- 3 - UltraBase/dock
+	- 4 - UltraBay
+	- 5 - UltraBase battery slot
+	- 6 - (unknown)
+	- 7 - standby
+	- 8 - dock status 1
+	- 9 - dock status 2
+	- 10, 11 - (unknown)
+	- 12 - thinkvantage
+	- 13, 14, 15 - (unknown)
 
 All of the above can be turned on and off and can be made to blink.
 
-sysfs notes:
+sysfs notes
+^^^^^^^^^^^
 
 The ThinkPad LED sysfs interface is described in detail by the LED class
 documentation, in Documentation/leds/leds-class.rst.
@@ -815,7 +855,7 @@ The BEEP method is used internally by the ACPI firmware to provide
 audible alerts in various situations. This feature allows the same
 sounds to be triggered manually.
 
-The commands are non-negative integer numbers:
+The commands are non-negative integer numbers::
 
 	echo <number> >/proc/acpi/ibm/beep
 
@@ -823,25 +863,26 @@ The valid <number> range is 0 to 17. Not all numbers trigger sounds
 and the sounds vary from model to model. Here is the behavior on the
 X40:
 
-	0 - stop a sound in progress (but use 17 to stop 16)
-	2 - two beeps, pause, third beep ("low battery")
-	3 - single beep
-	4 - high, followed by low-pitched beep ("unable")
-	5 - single beep
-	6 - very high, followed by high-pitched beep ("AC/DC")
-	7 - high-pitched beep
-	9 - three short beeps
-	10 - very long beep
-	12 - low-pitched beep
-	15 - three high-pitched beeps repeating constantly, stop with 0
-	16 - one medium-pitched beep repeating constantly, stop with 17
-	17 - stop 16
+	- 0 - stop a sound in progress (but use 17 to stop 16)
+	- 2 - two beeps, pause, third beep ("low battery")
+	- 3 - single beep
+	- 4 - high, followed by low-pitched beep ("unable")
+	- 5 - single beep
+	- 6 - very high, followed by high-pitched beep ("AC/DC")
+	- 7 - high-pitched beep
+	- 9 - three short beeps
+	- 10 - very long beep
+	- 12 - low-pitched beep
+	- 15 - three high-pitched beeps repeating constantly, stop with 0
+	- 16 - one medium-pitched beep repeating constantly, stop with 17
+	- 17 - stop 16
 
 
 Temperature sensors
 -------------------
 
 procfs: /proc/acpi/ibm/thermal
+
 sysfs device attributes: (hwmon "thinkpad") temp*_input
 
 Most ThinkPads include six or more separate temperature sensors but only
@@ -850,10 +891,14 @@ feature shows readings from up to eight different sensors on older
 ThinkPads, and up to sixteen different sensors on newer ThinkPads.
 
 For example, on the X40, a typical output may be:
-temperatures:   42 42 45 41 36 -128 33 -128
+
+temperatures:
+	42 42 45 41 36 -128 33 -128
 
 On the T43/p, a typical output may be:
-temperatures:   48 48 36 52 38 -128 31 -128 48 52 48 -128 -128 -128 -128 -128
+
+temperatures:
+	48 48 36 52 38 -128 31 -128 48 52 48 -128 -128 -128 -128 -128
 
 The mapping of thermal sensors to physical locations varies depending on
 system-board model (and thus, on ThinkPad model).
@@ -863,46 +908,53 @@ tries to track down these locations for various models.
 
 Most (newer?) models seem to follow this pattern:
 
-1:  CPU
-2:  (depends on model)
-3:  (depends on model)
-4:  GPU
-5:  Main battery: main sensor
-6:  Bay battery: main sensor
-7:  Main battery: secondary sensor
-8:  Bay battery: secondary sensor
-9-15: (depends on model)
+- 1:  CPU
+- 2:  (depends on model)
+- 3:  (depends on model)
+- 4:  GPU
+- 5:  Main battery: main sensor
+- 6:  Bay battery: main sensor
+- 7:  Main battery: secondary sensor
+- 8:  Bay battery: secondary sensor
+- 9-15: (depends on model)
 
 For the R51 (source: Thomas Gruber):
-2:  Mini-PCI
-3:  Internal HDD
+
+- 2:  Mini-PCI
+- 3:  Internal HDD
 
 For the T43, T43/p (source: Shmidoax/Thinkwiki.org)
 http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p
-2:  System board, left side (near PCMCIA slot), reported as HDAPS temp
-3:  PCMCIA slot
-9:  MCH (northbridge) to DRAM Bus
-10: Clock-generator, mini-pci card and ICH (southbridge), under Mini-PCI
-    card, under touchpad
-11: Power regulator, underside of system board, below F2 key
+
+- 2:  System board, left side (near PCMCIA slot), reported as HDAPS temp
+- 3:  PCMCIA slot
+- 9:  MCH (northbridge) to DRAM Bus
+- 10: Clock-generator, mini-pci card and ICH (southbridge), under Mini-PCI
+      card, under touchpad
+- 11: Power regulator, underside of system board, below F2 key
 
 The A31 has a very atypical layout for the thermal sensors
 (source: Milos Popovic, http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_A31)
-1:  CPU
-2:  Main Battery: main sensor
-3:  Power Converter
-4:  Bay Battery: main sensor
-5:  MCH (northbridge)
-6:  PCMCIA/ambient
-7:  Main Battery: secondary sensor
-8:  Bay Battery: secondary sensor
 
+- 1:  CPU
+- 2:  Main Battery: main sensor
+- 3:  Power Converter
+- 4:  Bay Battery: main sensor
+- 5:  MCH (northbridge)
+- 6:  PCMCIA/ambient
+- 7:  Main Battery: secondary sensor
+- 8:  Bay Battery: secondary sensor
+
+
+Procfs notes
+^^^^^^^^^^^^
 
-Procfs notes:
 	Readings from sensors that are not available return -128.
 	No commands can be written to this file.
 
-Sysfs notes:
+Sysfs notes
+^^^^^^^^^^^
+
 	Sensors that are not available return the ENXIO error.  This
 	status may change at runtime, as there are hotplug thermal
 	sensors, like those inside the batteries and docks.
@@ -921,6 +973,7 @@ ftp://ftp.suse.com/pub/people/trenn/sources/ec
 
 Use it to determine the register holding the fan
 speed on some models. To do that, do the following:
+
 	- make sure the battery is fully charged
 	- make sure the fan is running
 	- use above mentioned tool to read out the EC
@@ -941,6 +994,7 @@ LCD brightness control
 ----------------------
 
 procfs: /proc/acpi/ibm/brightness
+
 sysfs backlight device "thinkpad_screen"
 
 This feature allows software control of the LCD brightness on ThinkPad
@@ -985,15 +1039,17 @@ brightness_enable=0 forces it to be disabled.  brightness_enable=1
 forces it to be enabled when available, even if the standard ACPI
 interface is also available.
 
-Procfs notes:
+Procfs notes
+^^^^^^^^^^^^
 
-	The available commands are:
+The available commands are::
 
 	echo up   >/proc/acpi/ibm/brightness
 	echo down >/proc/acpi/ibm/brightness
 	echo 'level <level>' >/proc/acpi/ibm/brightness
 
-Sysfs notes:
+Sysfs notes
+^^^^^^^^^^^
 
 The interface is implemented through the backlight sysfs class, which is
 poorly documented at this time.
@@ -1038,6 +1094,7 @@ Volume control (Console Audio control)
 --------------------------------------
 
 procfs: /proc/acpi/ibm/volume
+
 ALSA: "ThinkPad Console Audio Control", default ID: "ThinkPadEC"
 
 NOTE: by default, the volume control interface operates in read-only
@@ -1053,7 +1110,8 @@ Software volume control should be done only in the main AC97/HDA
 mixer.
 
 
-About the ThinkPad Console Audio control:
+About the ThinkPad Console Audio control
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 ThinkPads have a built-in amplifier and muting circuit that drives the
 console headphone and speakers.  This circuit is after the main AC97
@@ -1092,13 +1150,14 @@ normal key presses to the operating system (thinkpad-acpi is not
 involved).
 
 
-The ThinkPad-ACPI volume control:
+The ThinkPad-ACPI volume control
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 The preferred way to interact with the Console Audio control is the
 ALSA interface.
 
 The legacy procfs interface allows one to read the current state,
-and if volume control is enabled, accepts the following commands:
+and if volume control is enabled, accepts the following commands::
 
 	echo up   >/proc/acpi/ibm/volume
 	echo down >/proc/acpi/ibm/volume
@@ -1137,13 +1196,15 @@ Fan control and monitoring: fan speed, fan enable/disable
 ---------------------------------------------------------
 
 procfs: /proc/acpi/ibm/fan
-sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1,
-			  pwm1_enable, fan2_input
+
+sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1, pwm1_enable, fan2_input
+
 sysfs hwmon driver attributes: fan_watchdog
 
-NOTE NOTE NOTE: fan control operations are disabled by default for
-safety reasons.  To enable them, the module parameter "fan_control=1"
-must be given to thinkpad-acpi.
+NOTE NOTE NOTE:
+   fan control operations are disabled by default for
+   safety reasons.  To enable them, the module parameter "fan_control=1"
+   must be given to thinkpad-acpi.
 
 This feature attempts to show the current fan speed, control mode and
 other fan data that might be available.  The speed is read directly
@@ -1154,7 +1215,8 @@ value on other models.
 Some Lenovo ThinkPads support a secondary fan.  This fan cannot be
 controlled separately, it shares the main fan control.
 
-Fan levels:
+Fan levels
+^^^^^^^^^^
 
 Most ThinkPad fans work in "levels" at the firmware interface.  Level 0
 stops the fan.  The higher the level, the higher the fan speed, although
@@ -1209,9 +1271,10 @@ therefore, not suitable to protect against fan mode changes made through
 means other than the "enable", "disable", and "level" procfs fan
 commands, or the hwmon fan control sysfs interface.
 
-Procfs notes:
+Procfs notes
+^^^^^^^^^^^^
 
-The fan may be enabled or disabled with the following commands:
+The fan may be enabled or disabled with the following commands::
 
 	echo enable  >/proc/acpi/ibm/fan
 	echo disable >/proc/acpi/ibm/fan
@@ -1219,7 +1282,7 @@ The fan may be enabled or disabled with the following commands:
 Placing a fan on level 0 is the same as disabling it.  Enabling a fan
 will try to place it in a safe level if it is too slow or disabled.
 
-The fan level can be controlled with the command:
+The fan level can be controlled with the command::
 
 	echo 'level <level>' > /proc/acpi/ibm/fan
 
@@ -1231,7 +1294,7 @@ compatibility.
 
 On the X31 and X40 (and ONLY on those models), the fan speed can be
 controlled to a certain degree.  Once the fan is running, it can be
-forced to run faster or slower with the following command:
+forced to run faster or slower with the following command::
 
 	echo 'speed <speed>' > /proc/acpi/ibm/fan
 
@@ -1241,13 +1304,14 @@ effect or the fan speed eventually settles somewhere in that range.  The
 fan cannot be stopped or started with this command.  This functionality
 is incomplete, and not available through the sysfs interface.
 
-To program the safety watchdog, use the "watchdog" command.
+To program the safety watchdog, use the "watchdog" command::
 
 	echo 'watchdog <interval in seconds>' > /proc/acpi/ibm/fan
 
 If you want to disable the watchdog, use 0 as the interval.
 
-Sysfs notes:
+Sysfs notes
+^^^^^^^^^^^
 
 The sysfs interface follows the hwmon subsystem guidelines for the most
 part, and the exception is the fan safety watchdog.
@@ -1261,10 +1325,10 @@ to the firmware).
 Features not yet implemented by the driver return ENOSYS.
 
 hwmon device attribute pwm1_enable:
-	0: PWM offline (fan is set to full-speed mode)
-	1: Manual PWM control (use pwm1 to set fan level)
-	2: Hardware PWM control (EC "auto" mode)
-	3: reserved (Software PWM control, not implemented yet)
+	- 0: PWM offline (fan is set to full-speed mode)
+	- 1: Manual PWM control (use pwm1 to set fan level)
+	- 2: Hardware PWM control (EC "auto" mode)
+	- 3: reserved (Software PWM control, not implemented yet)
 
 	Modes 0 and 2 are not supported by all ThinkPads, and the
 	driver is not always able to detect this.  If it does know a
@@ -1304,7 +1368,9 @@ WAN
 ---
 
 procfs: /proc/acpi/ibm/wan
+
 sysfs device attribute: wwan_enable (deprecated)
+
 sysfs rfkill class: switch "tpacpi_wwan_sw"
 
 This feature shows the presence and current state of the built-in
@@ -1316,22 +1382,24 @@ so it is kept across reboots and power-off.
 It was tested on a Lenovo ThinkPad X60. It should probably work on other
 ThinkPad models which come with this module installed.
 
-Procfs notes:
+Procfs notes
+^^^^^^^^^^^^
 
-If the W-WAN card is installed, the following commands can be used:
+If the W-WAN card is installed, the following commands can be used::
 
 	echo enable > /proc/acpi/ibm/wan
 	echo disable > /proc/acpi/ibm/wan
 
-Sysfs notes:
+Sysfs notes
+^^^^^^^^^^^
 
 	If the W-WAN card is installed, it can be enabled /
 	disabled through the "wwan_enable" thinkpad-acpi device
 	attribute, and its current status can also be queried.
 
 	enable:
-		0: disables WWAN card / WWAN card is disabled
-		1: enables WWAN card / WWAN card is enabled.
+		- 0: disables WWAN card / WWAN card is disabled
+		- 1: enables WWAN card / WWAN card is enabled.
 
 	Note: this interface has been superseded by the	generic rfkill
 	class.  It has been deprecated, and it will be removed in year
@@ -1354,7 +1422,8 @@ sysfs rfkill class: switch "tpacpi_uwb_sw"
 This feature exports an rfkill controller for the UWB device, if one is
 present and enabled in the BIOS.
 
-Sysfs notes:
+Sysfs notes
+^^^^^^^^^^^
 
 	rfkill controller switch "tpacpi_uwb_sw": refer to
 	Documentation/rfkill.rst for details.
@@ -1368,11 +1437,11 @@ This sysfs attribute controls the keyboard "face" that will be shown on the
 Lenovo X1 Carbon 2nd gen (2014)'s adaptive keyboard. The value can be read
 and set.
 
-1 = Home mode
-2 = Web-browser mode
-3 = Web-conference mode
-4 = Function mode
-5 = Layflat mode
+- 1 = Home mode
+- 2 = Web-browser mode
+- 3 = Web-conference mode
+- 4 = Function mode
+- 5 = Layflat mode
 
 For more details about which buttons will appear depending on the mode, please
 review the laptop's user guide:
@@ -1382,13 +1451,13 @@ Multiple Commands, Module Parameters
 ------------------------------------
 
 Multiple commands can be written to the proc files in one shot by
-separating them with commas, for example:
+separating them with commas, for example::
 
 	echo enable,0xffff > /proc/acpi/ibm/hotkey
 	echo lcd_disable,crt_enable > /proc/acpi/ibm/video
 
 Commands can also be specified when loading the thinkpad-acpi module,
-for example:
+for example::
 
 	modprobe thinkpad_acpi hotkey=enable,0xffff video=auto_disable
 
@@ -1397,14 +1466,16 @@ Enabling debugging output
 -------------------------
 
 The module takes a debug parameter which can be used to selectively
-enable various classes of debugging output, for example:
+enable various classes of debugging output, for example::
 
 	 modprobe thinkpad_acpi debug=0xffff
 
 will enable all debugging output classes.  It takes a bitmask, so
 to enable more than one output class, just add their values.
 
+	=============		======================================
 	Debug bitmask		Description
+	=============		======================================
 	0x8000			Disclose PID of userspace programs
 				accessing some functions of the driver
 	0x0001			Initialization and probing
@@ -1415,6 +1486,7 @@ to enable more than one output class, just add their values.
 	0x0010			Fan control
 	0x0020			Backlight brightness
 	0x0040			Audio mixer/volume control
+	=============		======================================
 
 There is also a kernel build option to enable more debugging
 information, which may be necessary to debug driver problems.
@@ -1432,8 +1504,10 @@ the module parameter force_load=1.  Regardless of whether this works or
 not, please contact ibm-acpi-devel@lists.sourceforge.net with a report.
 
 
-Sysfs interface changelog:
+Sysfs interface changelog
+^^^^^^^^^^^^^^^^^^^^^^^^^
 
+=========	===============================================================
 0x000100:	Initial sysfs support, as a single platform driver and
 		device.
 0x000200:	Hot key support for 32 hot keys, and radio slider switch
@@ -1485,3 +1559,4 @@ Sysfs interface changelog:
 0x030000:	Thermal and fan sysfs attributes were moved to the hwmon
 		device instead of being attached to the backing platform
 		device.
+=========	===============================================================
diff --git a/Documentation/laptops/toshiba_haps.txt b/Documentation/laptops/toshiba_haps.rst
similarity index 60%
rename from Documentation/laptops/toshiba_haps.txt
rename to Documentation/laptops/toshiba_haps.rst
index 0c1d88dedbde..11dfc428c080 100644
--- a/Documentation/laptops/toshiba_haps.txt
+++ b/Documentation/laptops/toshiba_haps.rst
@@ -1,18 +1,19 @@
-Kernel driver toshiba_haps
+====================================
 Toshiba HDD Active Protection Sensor
 ====================================
 
+Kernel driver: toshiba_haps
+
 Author: Azael Avalos <coproscefalo@gmail.com>
 
 
-0. Contents
------------
+.. 0. Contents
 
-1. Description
-2. Interface
-3. Accelerometer axes
-4. Supported devices
-5. Usage
+   1. Description
+   2. Interface
+   3. Accelerometer axes
+   4. Supported devices
+   5. Usage
 
 
 1. Description
@@ -32,17 +33,20 @@ file to set the desired protection level or sensor sensibility.
 ------------
 
 This device comes with 3 methods:
-_STA -  Checks existence of the device, returning Zero if the device does not
+
+====	=====================================================================
+_STA    Checks existence of the device, returning Zero if the device does not
 	exists or is not supported.
-PTLV -  Sets the desired protection level.
-RSSS -  Shuts down the HDD protection interface for a few seconds,
+PTLV    Sets the desired protection level.
+RSSS    Shuts down the HDD protection interface for a few seconds,
 	then restores normal operation.
+====	=====================================================================
 
 Note:
-The presence of Solid State Drives (SSD) can make this driver to fail loading,
-given the fact that such drives have no movable parts, and thus, not requiring
-any "protection" as well as failing during the evaluation of the _STA method
-found under this device.
+  The presence of Solid State Drives (SSD) can make this driver to fail loading,
+  given the fact that such drives have no movable parts, and thus, not requiring
+  any "protection" as well as failing during the evaluation of the _STA method
+  found under this device.
 
 
 3. Accelerometer axes
@@ -66,11 +70,18 @@ conventional HDD and not only SSD, or a combination of both HDD and SSD.
 --------
 
 The sysfs files under /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS620A:00/ are:
-protection_level - The protection_level is readable and writeable, and
+
+================   ============================================================
+protection_level   The protection_level is readable and writeable, and
 		   provides a way to let userspace query the current protection
 		   level, as well as set the desired protection level, the
 		   available protection levels are:
-		   0 - Disabled | 1 - Low | 2 - Medium | 3 - High
-reset_protection - The reset_protection entry is writeable only, being "1"
+
+		   ============   =======   ==========   ========
+		   0 - Disabled   1 - Low   2 - Medium   3 - High
+		   ============   =======   ==========   ========
+
+reset_protection   The reset_protection entry is writeable only, being "1"
 		   the only parameter it accepts, it is used to trigger
 		   a reset of the protection interface.
+================   ============================================================
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index 6758767c85a8..f10245b06b0e 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -102,7 +102,7 @@ Changing this takes effect whenever an application requests memory.
 block_dump
 
 block_dump enables block I/O debugging when set to a nonzero value. More
-information on block I/O debugging is in Documentation/laptops/laptop-mode.txt.
+information on block I/O debugging is in Documentation/laptops/laptop-mode.rst.
 
 ==============================================================
 
@@ -286,7 +286,7 @@ shared memory segment using hugetlb page.
 laptop_mode
 
 laptop_mode is a knob that controls "laptop mode". All the things that are
-controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt.
+controlled by this knob are discussed in Documentation/laptops/laptop-mode.rst.
 
 ==============================================================
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 6696779c0826..262dab70cbbf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14565,7 +14565,7 @@ M:	Mattia Dongili <malattia@linux.it>
 L:	platform-driver-x86@vger.kernel.org
 W:	http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
 S:	Maintained
-F:	Documentation/laptops/sony-laptop.txt
+F:	Documentation/laptops/sony-laptop.rst
 F:	drivers/char/sonypi.c
 F:	drivers/platform/x86/sony-laptop.c
 F:	include/linux/sony-laptop.h
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 110824a27510..ba90034f5b8f 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -382,7 +382,7 @@ config SONYPI
 	  Device which can be found in many (all ?) Sony Vaio laptops.
 
 	  If you have one of those laptops, read
-	  <file:Documentation/laptops/sonypi.txt>, and say Y or M here.
+	  <file:Documentation/laptops/sonypi.rst>, and say Y or M here.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called sonypi.
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 91b63cd4d48d..aa620324b1d9 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -450,7 +450,7 @@ config SONY_LAPTOP
 	  screen brightness control, Fn keys and allows powering on/off some
 	  devices.
 
-	  Read <file:Documentation/laptops/sony-laptop.txt> for more information.
+	  Read <file:Documentation/laptops/sony-laptop.rst> for more information.
 
 config SONYPI_COMPAT
 	bool "Sonypi compatibility"
@@ -502,7 +502,7 @@ config THINKPAD_ACPI
 	  support for Fn-Fx key combinations, Bluetooth control, video
 	  output switching, ThinkLight control, UltraBay eject and more.
 	  For more information about this driver see
-	  <file:Documentation/laptops/thinkpad-acpi.txt> and
+	  <file:Documentation/laptops/thinkpad-acpi.rst> and
 	  <http://ibm-acpi.sf.net/> .
 
 	  This driver was formerly known as ibm-acpi.
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 63/79] docs: iio: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (58 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 62/79] docs: laptops: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 14:25     ` Jonathan Cameron
  2019-04-22 13:27   ` [PATCH v2 64/79] docs: ioctl-number.txt: convert it to ReST format Mauro Carvalho Chehab
                     ` (17 subsequent siblings)
  77 siblings, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Jonathan Cameron, Hartmut Knaack,
	Lars-Peter Clausen, Peter Meerwald-Stadler, linux-iio

Rename the iio documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../iio/{ep93xx_adc.txt => ep93xx_adc.rst}    | 15 +++++-
 .../{iio_configfs.txt => iio_configfs.rst}    | 52 +++++++++++--------
 Documentation/iio/index.rst                   | 12 +++++
 drivers/iio/Kconfig                           |  2 +-
 4 files changed, 56 insertions(+), 25 deletions(-)
 rename Documentation/iio/{ep93xx_adc.txt => ep93xx_adc.rst} (71%)
 rename Documentation/iio/{iio_configfs.txt => iio_configfs.rst} (73%)
 create mode 100644 Documentation/iio/index.rst

diff --git a/Documentation/iio/ep93xx_adc.txt b/Documentation/iio/ep93xx_adc.rst
similarity index 71%
rename from Documentation/iio/ep93xx_adc.txt
rename to Documentation/iio/ep93xx_adc.rst
index 23053e7817bd..4fd8dea3f6b8 100644
--- a/Documentation/iio/ep93xx_adc.txt
+++ b/Documentation/iio/ep93xx_adc.rst
@@ -1,12 +1,16 @@
-Cirrus Logic EP93xx ADC driver.
+==============================
+Cirrus Logic EP93xx ADC driver
+==============================
 
 1. Overview
+===========
 
 The driver is intended to work on both low-end (EP9301, EP9302) devices with
 5-channel ADC and high-end (EP9307, EP9312, EP9315) devices with 10-channel
 touchscreen/ADC module.
 
 2. Channel numbering
+====================
 
 Numbering scheme for channels 0..4 is defined in EP9301 and EP9302 datasheets.
 EP9307, EP9312 and EP9312 have 3 channels more (total 8), but the numbering is
@@ -17,13 +21,20 @@ Assuming ep93xx_adc is IIO device0, you'd find the following entries under
 
   +-----------------+---------------+
   | sysfs entry     | ball/pin name |
-  +-----------------+---------------+
+  +=================+===============+
   | in_voltage0_raw | YM            |
+  +-----------------+---------------+
   | in_voltage1_raw | SXP           |
+  +-----------------+---------------+
   | in_voltage2_raw | SXM           |
+  +-----------------+---------------+
   | in_voltage3_raw | SYP           |
+  +-----------------+---------------+
   | in_voltage4_raw | SYM           |
+  +-----------------+---------------+
   | in_voltage5_raw | XP            |
+  +-----------------+---------------+
   | in_voltage6_raw | XM            |
+  +-----------------+---------------+
   | in_voltage7_raw | YP            |
   +-----------------+---------------+
diff --git a/Documentation/iio/iio_configfs.txt b/Documentation/iio/iio_configfs.rst
similarity index 73%
rename from Documentation/iio/iio_configfs.txt
rename to Documentation/iio/iio_configfs.rst
index 4e5f101837a8..ecbfdb3afef7 100644
--- a/Documentation/iio/iio_configfs.txt
+++ b/Documentation/iio/iio_configfs.rst
@@ -1,6 +1,9 @@
+===============================
 Industrial IIO configfs support
+===============================
 
 1. Overview
+===========
 
 Configfs is a filesystem-based manager of kernel objects. IIO uses some
 objects that could be easily configured using configfs (e.g.: devices,
@@ -10,20 +13,22 @@ See Documentation/filesystems/configfs/configfs.txt for more information
 about how configfs works.
 
 2. Usage
+========
 
 In order to use configfs support in IIO we need to select it at compile
 time via CONFIG_IIO_CONFIGFS config option.
 
-Then, mount the configfs filesystem (usually under /config directory):
+Then, mount the configfs filesystem (usually under /config directory)::
 
-$ mkdir /config
-$ mount -t configfs none /config
+  $ mkdir /config
+  $ mount -t configfs none /config
 
 At this point, all default IIO groups will be created and can be accessed
 under /config/iio. Next chapters will describe available IIO configuration
 objects.
 
 3. Software triggers
+====================
 
 One of the IIO default configfs groups is the "triggers" group. It is
 automagically accessible when the configfs is mounted and can be found
@@ -31,40 +36,40 @@ under /config/iio/triggers.
 
 IIO software triggers implementation offers support for creating multiple
 trigger types. A new trigger type is usually implemented as a separate
-kernel module following the interface in include/linux/iio/sw_trigger.h:
+kernel module following the interface in include/linux/iio/sw_trigger.h::
 
-/*
- * drivers/iio/trigger/iio-trig-sample.c
- * sample kernel module implementing a new trigger type
- */
-#include <linux/iio/sw_trigger.h>
+  /*
+   * drivers/iio/trigger/iio-trig-sample.c
+   * sample kernel module implementing a new trigger type
+   */
+  #include <linux/iio/sw_trigger.h>
 
 
-static struct iio_sw_trigger *iio_trig_sample_probe(const char *name)
-{
+  static struct iio_sw_trigger *iio_trig_sample_probe(const char *name)
+  {
 	/*
 	 * This allocates and registers an IIO trigger plus other
 	 * trigger type specific initialization.
 	 */
-}
+  }
 
-static int iio_trig_hrtimer_remove(struct iio_sw_trigger *swt)
-{
+  static int iio_trig_hrtimer_remove(struct iio_sw_trigger *swt)
+  {
 	/*
 	 * This undoes the actions in iio_trig_sample_probe
 	 */
-}
+  }
 
-static const struct iio_sw_trigger_ops iio_trig_sample_ops = {
+  static const struct iio_sw_trigger_ops iio_trig_sample_ops = {
 	.probe		= iio_trig_sample_probe,
 	.remove		= iio_trig_sample_remove,
-};
+  };
 
-static struct iio_sw_trigger_type iio_trig_sample = {
+  static struct iio_sw_trigger_type iio_trig_sample = {
 	.name = "trig-sample",
 	.owner = THIS_MODULE,
 	.ops = &iio_trig_sample_ops,
-};
+  };
 
 module_iio_sw_trigger_driver(iio_trig_sample);
 
@@ -73,21 +78,24 @@ iio-trig-sample module will create 'trig-sample' trigger type directory
 /config/iio/triggers/trig-sample.
 
 We support the following interrupt sources (trigger types):
+
 	* hrtimer, uses high resolution timers as interrupt source
 
 3.1 Hrtimer triggers creation and destruction
+---------------------------------------------
 
 Loading iio-trig-hrtimer module will register hrtimer trigger types allowing
 users to create hrtimer triggers under /config/iio/triggers/hrtimer.
 
-e.g:
+e.g::
 
-$ mkdir /config/iio/triggers/hrtimer/instance1
-$ rmdir /config/iio/triggers/hrtimer/instance1
+  $ mkdir /config/iio/triggers/hrtimer/instance1
+  $ rmdir /config/iio/triggers/hrtimer/instance1
 
 Each trigger can have one or more attributes specific to the trigger type.
 
 3.2 "hrtimer" trigger types attributes
+--------------------------------------
 
 "hrtimer" trigger type doesn't have any configurable attribute from /config dir.
 It does introduce the sampling_frequency attribute to trigger directory.
diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst
new file mode 100644
index 000000000000..0593dca89a94
--- /dev/null
+++ b/Documentation/iio/index.rst
@@ -0,0 +1,12 @@
+:orphan:
+
+==============
+Industrial I/O
+==============
+
+.. toctree::
+   :maxdepth: 1
+
+   iio_configfs
+
+   ep93xx_adc
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index 014006d1cbb6..c1aa87db19ff 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -28,7 +28,7 @@ config IIO_CONFIGFS
 	help
 	  This allows configuring various IIO bits through configfs
 	  (e.g. software triggers). For more info see
-	  Documentation/iio/iio_configfs.txt.
+	  Documentation/iio/iio_configfs.rst.
 
 config IIO_TRIGGER
 	bool "Enable triggered sampling support"
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 64/79] docs: ioctl-number.txt: convert it to ReST format
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (59 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 63/79] docs: iio: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 14:05     ` Doug Ledford
  2019-04-22 13:27   ` [PATCH v2 65/79] docs: ioctl: convert to ReST Mauro Carvalho Chehab
                     ` (16 subsequent siblings)
  77 siblings, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Federico Vaga, Harry Wei, Alex Shi,
	Doug Ledford, Jason Gunthorpe, linux-rdma

The conversion itself is simple: add a markup for the
title of this file and add markups for both tables.

Yet, the big table here with IOCTL numbers is badly formatted:
on several lines, the "Include File" column has some values that
are bigger than the reserved space there.

Also, on several places, a comment was misplaced at the "Include
File" space.

So, most of the work here is to actually ensure that each field
will be properly fixed.

Also worth to mention that some URLs have the asterisk character
on it. Well, Sphinx has an issue with asterisks in the middle
of an string. As this is URL, use the alternate format: %2A.

As a side effect of this patch, it is now a lot easier to see that
some reserved ioctl numbers are missing the include files
where it is supposed to be used.

PS.: While this is part of a subdir, I opted to convert this
single file alone, as this file has a potential of conflicts,
as most subsystem maintainers touch it.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/ioctl/ioctl-number.rst          | 360 ++++++++++++++++++
 Documentation/ioctl/ioctl-number.txt          | 350 -----------------
 Documentation/process/submit-checklist.rst    |   2 +-
 .../it_IT/process/submit-checklist.rst        |   2 +-
 .../zh_CN/process/submit-checklist.rst        |   2 +-
 include/uapi/rdma/rdma_user_ioctl_cmds.h      |   2 +-
 6 files changed, 364 insertions(+), 354 deletions(-)
 create mode 100644 Documentation/ioctl/ioctl-number.rst
 delete mode 100644 Documentation/ioctl/ioctl-number.txt

diff --git a/Documentation/ioctl/ioctl-number.rst b/Documentation/ioctl/ioctl-number.rst
new file mode 100644
index 000000000000..597111dcca0c
--- /dev/null
+++ b/Documentation/ioctl/ioctl-number.rst
@@ -0,0 +1,360 @@
+=============
+Ioctl Numbers
+=============
+
+19 October 1999
+
+Michael Elizabeth Chastain
+<mec@shout.net>
+
+If you are adding new ioctl's to the kernel, you should use the _IO
+macros defined in <linux/ioctl.h>:
+
+    ====== == ============================================
+    _IO    an ioctl with no parameters
+    _IOW   an ioctl with write parameters (copy_from_user)
+    _IOR   an ioctl with read parameters  (copy_to_user)
+    _IOWR  an ioctl with both write and read parameters.
+    ====== == ============================================
+
+'Write' and 'read' are from the user's point of view, just like the
+system calls 'write' and 'read'.  For example, a SET_FOO ioctl would
+be _IOW, although the kernel would actually read data from user space;
+a GET_FOO ioctl would be _IOR, although the kernel would actually write
+data to user space.
+
+The first argument to _IO, _IOW, _IOR, or _IOWR is an identifying letter
+or number from the table below.  Because of the large number of drivers,
+many drivers share a partial letter with other drivers.
+
+If you are writing a driver for a new device and need a letter, pick an
+unused block with enough room for expansion: 32 to 256 ioctl commands.
+You can register the block by patching this file and submitting the
+patch to Linus Torvalds.  Or you can e-mail me at <mec@shout.net> and
+I'll register one for you.
+
+The second argument to _IO, _IOW, _IOR, or _IOWR is a sequence number
+to distinguish ioctls from each other.  The third argument to _IOW,
+_IOR, or _IOWR is the type of the data going into the kernel or coming
+out of the kernel (e.g.  'int' or 'struct foo').  NOTE!  Do NOT use
+sizeof(arg) as the third argument as this results in your ioctl thinking
+it passes an argument of type size_t.
+
+Some devices use their major number as the identifier; this is OK, as
+long as it is unique.  Some devices are irregular and don't follow any
+convention at all.
+
+Following this convention is good because:
+
+(1) Keeping the ioctl's globally unique helps error checking:
+    if a program calls an ioctl on the wrong device, it will get an
+    error rather than some unexpected behaviour.
+
+(2) The 'strace' build procedure automatically finds ioctl numbers
+    defined with _IO, _IOW, _IOR, or _IOWR.
+
+(3) 'strace' can decode numbers back into useful names when the
+    numbers are unique.
+
+(4) People looking for ioctls can grep for them more easily when
+    this convention is used to define the ioctl numbers.
+
+(5) When following the convention, the driver code can use generic
+    code to copy the parameters between user and kernel space.
+
+This table lists ioctls visible from user land for Linux/x86.  It contains
+most drivers up to 2.6.31, but I know I am missing some.  There has been
+no attempt to list non-X86 architectures or ioctls from drivers/staging/.
+
+====  =====  ======================================================= ================================================================
+Code  Seq#    Include File                                           Comments
+      (hex)
+====  =====  ======================================================= ================================================================
+0x00  00-1F  linux/fs.h                                              conflict!
+0x00  00-1F  scsi/scsi_ioctl.h                                       conflict!
+0x00  00-1F  linux/fb.h                                              conflict!
+0x00  00-1F  linux/wavefront.h                                       conflict!
+0x02  all    linux/fd.h
+0x03  all    linux/hdreg.h
+0x04  D2-DC  linux/umsdos_fs.h                                       Dead since 2.6.11, but don't reuse these.
+0x06  all    linux/lp.h
+0x09  all    linux/raid/md_u.h
+0x10  00-0F  drivers/char/s390/vmcp.h
+0x10  10-1F  arch/s390/include/uapi/sclp_ctl.h
+0x10  20-2F  arch/s390/include/uapi/asm/hypfs.h
+0x12  all    linux/fs.h
+             linux/blkpg.h
+0x1b  all                                                            InfiniBand Subsystem
+                                                                     <http://infiniband.sourceforge.net/>
+0x20  all    drivers/cdrom/cm206.h
+0x22  all    scsi/sg.h
+'!'   00-1F  uapi/linux/seccomp.h
+'#'   00-3F                                                          IEEE 1394 Subsystem
+                                                                     Block for the entire subsystem
+'$'   00-0F  linux/perf_counter.h, linux/perf_event.h
+'%'   00-0F  include/uapi/linux/stm.h                                System Trace Module subsystem
+                                                                     <mailto:alexander.shishkin@linux.intel.com>
+'&'   00-07  drivers/firewire/nosy-user.h
+'1'   00-1F  linux/timepps.h                                         PPS kit from Ulrich Windl
+                                                                     <ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/>
+'2'   01-04  linux/i2o.h
+'3'   00-0F  drivers/s390/char/raw3270.h                             conflict!
+'3'   00-1F  linux/suspend_ioctls.h,                                 conflict!
+             kernel/power/user.c
+'8'   all                                                            SNP8023 advanced NIC card
+                                                                     <mailto:mcr@solidum.com>
+';'   64-7F  linux/vfio.h
+'@'   00-0F  linux/radeonfb.h                                        conflict!
+'@'   00-0F  drivers/video/aty/aty128fb.c                            conflict!
+'A'   00-1F  linux/apm_bios.h                                        conflict!
+'A'   00-0F  linux/agpgart.h,                                        conflict!
+             drivers/char/agp/compat_ioctl.h
+'A'   00-7F  sound/asound.h                                          conflict!
+'B'   00-1F  linux/cciss_ioctl.h                                     conflict!
+'B'   00-0F  include/linux/pmu.h                                     conflict!
+'B'   C0-FF  advanced bbus                                           <mailto:maassen@uni-freiburg.de>
+'C'   all    linux/soundcard.h                                       conflict!
+'C'   01-2F  linux/capi.h                                            conflict!
+'C'   F0-FF  drivers/net/wan/cosa.h                                  conflict!
+'D'   all    arch/s390/include/asm/dasd.h
+'D'   40-5F  drivers/scsi/dpt/dtpi_ioctl.h
+'D'   05     drivers/scsi/pmcraid.h
+'E'   all    linux/input.h                                           conflict!
+'E'   00-0F  xen/evtchn.h                                            conflict!
+'F'   all    linux/fb.h                                              conflict!
+'F'   01-02  drivers/scsi/pmcraid.h                                  conflict!
+'F'   20     drivers/video/fsl-diu-fb.h                              conflict!
+'F'   20     drivers/video/intelfb/intelfb.h                         conflict!
+'F'   20     linux/ivtvfb.h                                          conflict!
+'F'   20     linux/matroxfb.h                                        conflict!
+'F'   20     drivers/video/aty/atyfb_base.c                          conflict!
+'F'   00-0F  video/da8xx-fb.h                                        conflict!
+'F'   80-8F  linux/arcfb.h                                           conflict!
+'F'   DD     video/sstfb.h                                           conflict!
+'G'   00-3F  drivers/misc/sgi-gru/grulib.h                           conflict!
+'G'   00-0F  linux/gigaset_dev.h                                     conflict!
+'H'   00-7F  linux/hiddev.h                                          conflict!
+'H'   00-0F  linux/hidraw.h                                          conflict!
+'H'   01     linux/mei.h                                             conflict!
+'H'   02     linux/mei.h                                             conflict!
+'H'   03     linux/mei.h                                             conflict!
+'H'   00-0F  sound/asound.h                                          conflict!
+'H'   20-40  sound/asound_fm.h                                       conflict!
+'H'   80-8F  sound/sfnt_info.h                                       conflict!
+'H'   10-8F  sound/emu10k1.h                                         conflict!
+'H'   10-1F  sound/sb16_csp.h                                        conflict!
+'H'   10-1F  sound/hda_hwdep.h                                       conflict!
+'H'   40-4F  sound/hdspm.h                                           conflict!
+'H'   40-4F  sound/hdsp.h                                            conflict!
+'H'   90     sound/usb/usx2y/usb_stream.h
+'H'   A0     uapi/linux/usb/cdc-wdm.h
+'H'   C0-F0  net/bluetooth/hci.h                                     conflict!
+'H'   C0-DF  net/bluetooth/hidp/hidp.h                               conflict!
+'H'   C0-DF  net/bluetooth/cmtp/cmtp.h                               conflict!
+'H'   C0-DF  net/bluetooth/bnep/bnep.h                               conflict!
+'H'   F1     linux/hid-roccat.h                                      <mailto:erazor_de@users.sourceforge.net>
+'H'   F8-FA  sound/firewire.h
+'I'   all    linux/isdn.h                                            conflict!
+'I'   00-0F  drivers/isdn/divert/isdn_divert.h                       conflict!
+'I'   40-4F  linux/mISDNif.h                                         conflict!
+'J'   00-1F  drivers/scsi/gdth_ioctl.h
+'K'   all    linux/kd.h
+'L'   00-1F  linux/loop.h                                            conflict!
+'L'   10-1F  drivers/scsi/mpt3sas/mpt3sas_ctl.h                      conflict!
+'L'   20-2F  linux/lightnvm.h
+'L'   E0-FF  linux/ppdd.h                                            encrypted disk device driver
+                                                                     <http://linux01.gwdg.de/~alatham/ppdd.html>
+'M'   all    linux/soundcard.h                                       conflict!
+'M'   01-16  mtd/mtd-abi.h                                           conflict!
+      and    drivers/mtd/mtdchar.c
+'M'   01-03  drivers/scsi/megaraid/megaraid_sas.h
+'M'   00-0F  drivers/video/fsl-diu-fb.h                              conflict!
+'N'   00-1F  drivers/usb/scanner.h
+'N'   40-7F  drivers/block/nvme.c
+'O'   00-06  mtd/ubi-user.h                                          UBI
+'P'   all    linux/soundcard.h                                       conflict!
+'P'   60-6F  sound/sscape_ioctl.h                                    conflict!
+'P'   00-0F  drivers/usb/class/usblp.c                               conflict!
+'P'   01-09  drivers/misc/pci_endpoint_test.c                        conflict!
+'Q'   all    linux/soundcard.h
+'R'   00-1F  linux/random.h                                          conflict!
+'R'   01     linux/rfkill.h                                          conflict!
+'R'   C0-DF  net/bluetooth/rfcomm.h
+'S'   all    linux/cdrom.h                                           conflict!
+'S'   80-81  scsi/scsi_ioctl.h                                       conflict!
+'S'   82-FF  scsi/scsi.h                                             conflict!
+'S'   00-7F  sound/asequencer.h                                      conflict!
+'T'   all    linux/soundcard.h                                       conflict!
+'T'   00-AF  sound/asound.h                                          conflict!
+'T'   all    arch/x86/include/asm/ioctls.h                           conflict!
+'T'   C0-DF  linux/if_tun.h                                          conflict!
+'U'   all    sound/asound.h                                          conflict!
+'U'   00-CF  linux/uinput.h                                          conflict!
+'U'   00-EF  linux/usbdevice_fs.h
+'U'   C0-CF  drivers/bluetooth/hci_uart.h
+'V'   all    linux/vt.h                                              conflict!
+'V'   all    linux/videodev2.h                                       conflict!
+'V'   C0     linux/ivtvfb.h                                          conflict!
+'V'   C0     linux/ivtv.h                                            conflict!
+'V'   C0     media/davinci/vpfe_capture.h                            conflict!
+'V'   C0     media/si4713.h                                          conflict!
+'W'   00-1F  linux/watchdog.h                                        conflict!
+'W'   00-1F  linux/wanrouter.h                                       conflict! (pre 3.9)
+'W'   00-3F  sound/asound.h                                          conflict!
+'W'   40-5F  drivers/pci/switch/switchtec.c
+'X'   all    fs/xfs/xfs_fs.h,                                        conflict!
+             fs/xfs/linux-2.6/xfs_ioctl32.h,
+             include/linux/falloc.h,
+             linux/fs.h,
+'X'   all    fs/ocfs2/ocfs_fs.h                                      conflict!
+'X'   01     linux/pktcdvd.h                                         conflict!
+'Y'   all    linux/cyclades.h
+'Z'   14-15  drivers/message/fusion/mptctl.h
+'['   00-3F  linux/usb/tmc.h                                         USB Test and Measurement Devices
+                                                                     <mailto:gregkh@linuxfoundation.org>
+'a'   all    linux/atm*.h, linux/sonet.h                             ATM on linux
+                                                                     <http://lrcwww.epfl.ch/>
+'a'   00-0F  drivers/crypto/qat/qat_common/adf_cfg_common.h          conflict! qat driver
+'b'   00-FF                                                          conflict! bit3 vme host bridge
+                                                                     <mailto:natalia@nikhefk.nikhef.nl>
+'c'   all    linux/cm4000_cs.h                                       conflict!
+'c'   00-7F  linux/comstats.h                                        conflict!
+'c'   00-7F  linux/coda.h                                            conflict!
+'c'   00-1F  linux/chio.h                                            conflict!
+'c'   80-9F  arch/s390/include/asm/chsc.h                            conflict!
+'c'   A0-AF  arch/x86/include/asm/msr.h conflict!
+'d'   00-FF  linux/char/drm/drm.h                                    conflict!
+'d'   02-40  pcmcia/ds.h                                             conflict!
+'d'   F0-FF  linux/digi1.h
+'e'   all    linux/digi1.h                                           conflict!
+'f'   00-1F  linux/ext2_fs.h                                         conflict!
+'f'   00-1F  linux/ext3_fs.h                                         conflict!
+'f'   00-0F  fs/jfs/jfs_dinode.h                                     conflict!
+'f'   00-0F  fs/ext4/ext4.h                                          conflict!
+'f'   00-0F  linux/fs.h                                              conflict!
+'f'   00-0F  fs/ocfs2/ocfs2_fs.h                                     conflict!
+'g'   00-0F  linux/usb/gadgetfs.h
+'g'   20-2F  linux/usb/g_printer.h
+'h'   00-7F                                                          conflict! Charon filesystem
+                                                                     <mailto:zapman@interlan.net>
+'h'   00-1F  linux/hpet.h                                            conflict!
+'h'   80-8F  fs/hfsplus/ioctl.c
+'i'   00-3F  linux/i2o-dev.h                                         conflict!
+'i'   0B-1F  linux/ipmi.h                                            conflict!
+'i'   80-8F  linux/i8k.h
+'j'   00-3F  linux/joystick.h
+'k'   00-0F  linux/spi/spidev.h                                      conflict!
+'k'   00-05  video/kyro.h                                            conflict!
+'k'   10-17  linux/hsi/hsi_char.h                                    HSI character device
+'l'   00-3F  linux/tcfs_fs.h                                         transparent cryptographic file system
+                                                                     <http://web.archive.org/web/%2A/http://mikonos.dia.unisa.it/tcfs>
+'l'   40-7F  linux/udf_fs_i.h                                        in development:
+                                                                     <http://sourceforge.net/projects/linux-udf/>
+'m'   00-09  linux/mmtimer.h                                         conflict!
+'m'   all    linux/mtio.h                                            conflict!
+'m'   all    linux/soundcard.h                                       conflict!
+'m'   all    linux/synclink.h                                        conflict!
+'m'   00-19  drivers/message/fusion/mptctl.h                         conflict!
+'m'   00     drivers/scsi/megaraid/megaraid_ioctl.h                  conflict!
+'n'   00-7F  linux/ncp_fs.h and fs/ncpfs/ioctl.c
+'n'   80-8F  uapi/linux/nilfs2_api.h                                 NILFS2
+'n'   E0-FF  linux/matroxfb.h                                        matroxfb
+'o'   00-1F  fs/ocfs2/ocfs2_fs.h                                     OCFS2
+'o'   00-03  mtd/ubi-user.h                                          conflict! (OCFS2 and UBI overlaps)
+'o'   40-41  mtd/ubi-user.h                                          UBI
+'o'   01-A1  `linux/dvb/*.h`                                         DVB
+'p'   00-0F  linux/phantom.h                                         conflict! (OpenHaptics needs this)
+'p'   00-1F  linux/rtc.h                                             conflict!
+'p'   00-3F  linux/mc146818rtc.h                                     conflict!
+'p'   40-7F  linux/nvram.h
+'p'   80-9F  linux/ppdev.h                                           user-space parport
+                                                                     <mailto:tim@cyberelk.net>
+'p'   A1-A5  linux/pps.h                                             LinuxPPS
+                                                                     <mailto:giometti@linux.it>
+'q'   00-1F  linux/serio.h
+'q'   80-FF  linux/telephony.h                                       Internet PhoneJACK, Internet LineJACK
+             linux/ixjuser.h                                         <http://web.archive.org/web/%2A/http://www.quicknet.net>
+'r'   00-1F  linux/msdos_fs.h and fs/fat/dir.c
+'s'   all    linux/cdk.h
+'t'   00-7F  linux/ppp-ioctl.h
+'t'   80-8F  linux/isdn_ppp.h
+'t'   90-91  linux/toshiba.h                                         toshiba and toshiba_acpi SMM
+'u'   00-1F  linux/smb_fs.h                                          gone
+'u'   20-3F  linux/uvcvideo.h                                        USB video class host driver
+'u'   40-4f  linux/udmabuf.h                                         userspace dma-buf misc device
+'v'   00-1F  linux/ext2_fs.h                                         conflict!
+'v'   00-1F  linux/fs.h                                              conflict!
+'v'   00-0F  linux/sonypi.h                                          conflict!
+'v'   00-0F  media/v4l2-subdev.h                                     conflict!
+'v'   C0-FF  linux/meye.h                                            conflict!
+'w'   all                                                            CERN SCI driver
+'y'   00-1F                                                          packet based user level communications
+                                                                     <mailto:zapman@interlan.net>
+'z'   00-3F                                                          CAN bus card conflict!
+                                                                     <mailto:hdstich@connectu.ulm.circular.de>
+'z'   40-7F                                                          CAN bus card conflict!
+                                                                     <mailto:oe@port.de>
+'z'   10-4F  drivers/s390/crypto/zcrypt_api.h                        conflict!
+'|'   00-7F  linux/media.h
+0x80  00-1F  linux/fb.h
+0x89  00-06  arch/x86/include/asm/sockios.h
+0x89  0B-DF  linux/sockios.h
+0x89  E0-EF  linux/sockios.h                                         SIOCPROTOPRIVATE range
+0x89  E0-EF  linux/dn.h                                              PROTOPRIVATE range
+0x89  F0-FF  linux/sockios.h                                         SIOCDEVPRIVATE range
+0x8B  all    linux/wireless.h
+0x8C  00-3F                                                          WiNRADiO driver
+                                                                     <http://www.winradio.com.au/>
+0x90  00     drivers/cdrom/sbpcd.h
+0x92  00-0F  drivers/usb/mon/mon_bin.c
+0x93  60-7F  linux/auto_fs.h
+0x94  all    fs/btrfs/ioctl.h                                        Btrfs filesystem
+             and linux/fs.h                                          some lifted to vfs/generic
+0x97  00-7F  fs/ceph/ioctl.h                                         Ceph file system
+0x99  00-0F                                                          537-Addinboard driver
+                                                                     <mailto:buk@buks.ipn.de>
+0xA0  all    linux/sdp/sdp.h                                         Industrial Device Project
+                                                                     <mailto:kenji@bitgate.com>
+0xA1  0      linux/vtpm_proxy.h                                      TPM Emulator Proxy Driver
+0xA3  80-8F                                                          Port ACL  in development:
+                                                                     <mailto:tlewis@mindspring.com>
+0xA3  90-9F  linux/dtlk.h
+0xA4  00-1F  uapi/linux/tee.h                                        Generic TEE subsystem
+0xAA  00-3F  linux/uapi/linux/userfaultfd.h
+0xAB  00-1F  linux/nbd.h
+0xAC  00-1F  linux/raw.h
+0xAD  00                                                             Netfilter device in development:
+                                                                     <mailto:rusty@rustcorp.com.au>
+0xAE  all    linux/kvm.h                                             Kernel-based Virtual Machine
+                                                                     <mailto:kvm@vger.kernel.org>
+0xAF  00-1F  linux/fsl_hypervisor.h                                  Freescale hypervisor
+0xB0  all                                                            RATIO devices in development:
+                                                                     <mailto:vgo@ratio.de>
+0xB1  00-1F                                                          PPPoX
+                                                                     <mailto:mostrows@styx.uwaterloo.ca>
+0xB3  00     linux/mmc/ioctl.h
+0xB4  00-0F  linux/gpio.h                                            <mailto:linux-gpio@vger.kernel.org>
+0xB5  00-0F  uapi/linux/rpmsg.h                                      <mailto:linux-remoteproc@vger.kernel.org>
+0xB6  all    linux/fpga-dfl.h
+0xC0  00-0F  linux/usb/iowarrior.h
+0xCA  00-0F  uapi/misc/cxl.h
+0xCA  10-2F  uapi/misc/ocxl.h
+0xCA  80-BF  uapi/scsi/cxlflash_ioctl.h
+0xCB  00-1F                                                          CBM serial IEC bus in development:
+                                                                     <mailto:michael.klein@puffin.lb.shuttle.de>
+0xCC  00-0F  drivers/misc/ibmvmc.h                                   pseries VMC driver
+0xCD  01     linux/reiserfs_fs.h
+0xCF  02     fs/cifs/ioctl.c
+0xDB  00-0F  drivers/char/mwave/mwavepub.h
+0xDD  00-3F                                                          ZFCP device driver see drivers/s390/scsi/
+                                                                     <mailto:aherrman@de.ibm.com>
+0xE5  00-3F  linux/fuse.h
+0xEC  00-01  drivers/platform/chrome/cros_ec_dev.h                   ChromeOS EC driver
+0xF3  00-3F  drivers/usb/misc/sisusbvga/sisusb.h                     sisfb (in development)
+                                                                     <mailto:thomas@winischhofer.net>
+0xF4  00-1F  video/mbxfb.h                                           mbxfb
+                                                                     <mailto:raph@8d.com>
+0xF6  all                                                            LTTng Linux Trace Toolkit Next Generation
+                                                                     <mailto:mathieu.desnoyers@efficios.com>
+0xFD  all    linux/dm-ioctl.h
+====  =====  ======================================================= ================================================================
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
deleted file mode 100644
index c9558146ac58..000000000000
--- a/Documentation/ioctl/ioctl-number.txt
+++ /dev/null
@@ -1,350 +0,0 @@
-Ioctl Numbers
-19 October 1999
-Michael Elizabeth Chastain
-<mec@shout.net>
-
-If you are adding new ioctl's to the kernel, you should use the _IO
-macros defined in <linux/ioctl.h>:
-
-    _IO    an ioctl with no parameters
-    _IOW   an ioctl with write parameters (copy_from_user)
-    _IOR   an ioctl with read parameters  (copy_to_user)
-    _IOWR  an ioctl with both write and read parameters.
-
-'Write' and 'read' are from the user's point of view, just like the
-system calls 'write' and 'read'.  For example, a SET_FOO ioctl would
-be _IOW, although the kernel would actually read data from user space;
-a GET_FOO ioctl would be _IOR, although the kernel would actually write
-data to user space.
-
-The first argument to _IO, _IOW, _IOR, or _IOWR is an identifying letter
-or number from the table below.  Because of the large number of drivers,
-many drivers share a partial letter with other drivers.
-
-If you are writing a driver for a new device and need a letter, pick an
-unused block with enough room for expansion: 32 to 256 ioctl commands.
-You can register the block by patching this file and submitting the
-patch to Linus Torvalds.  Or you can e-mail me at <mec@shout.net> and
-I'll register one for you.
-
-The second argument to _IO, _IOW, _IOR, or _IOWR is a sequence number
-to distinguish ioctls from each other.  The third argument to _IOW,
-_IOR, or _IOWR is the type of the data going into the kernel or coming
-out of the kernel (e.g.  'int' or 'struct foo').  NOTE!  Do NOT use
-sizeof(arg) as the third argument as this results in your ioctl thinking
-it passes an argument of type size_t.
-
-Some devices use their major number as the identifier; this is OK, as
-long as it is unique.  Some devices are irregular and don't follow any
-convention at all.
-
-Following this convention is good because:
-
-(1) Keeping the ioctl's globally unique helps error checking:
-    if a program calls an ioctl on the wrong device, it will get an
-    error rather than some unexpected behaviour.
-
-(2) The 'strace' build procedure automatically finds ioctl numbers
-    defined with _IO, _IOW, _IOR, or _IOWR.
-
-(3) 'strace' can decode numbers back into useful names when the
-    numbers are unique.
-
-(4) People looking for ioctls can grep for them more easily when
-    this convention is used to define the ioctl numbers.
-
-(5) When following the convention, the driver code can use generic
-    code to copy the parameters between user and kernel space.
-
-This table lists ioctls visible from user land for Linux/x86.  It contains
-most drivers up to 2.6.31, but I know I am missing some.  There has been
-no attempt to list non-X86 architectures or ioctls from drivers/staging/.
-
-Code  Seq#(hex)	Include File		Comments
-========================================================
-0x00	00-1F	linux/fs.h		conflict!
-0x00	00-1F	scsi/scsi_ioctl.h	conflict!
-0x00	00-1F	linux/fb.h		conflict!
-0x00	00-1F	linux/wavefront.h	conflict!
-0x02	all	linux/fd.h
-0x03	all	linux/hdreg.h
-0x04	D2-DC	linux/umsdos_fs.h	Dead since 2.6.11, but don't reuse these.
-0x06	all	linux/lp.h
-0x09	all	linux/raid/md_u.h
-0x10	00-0F	drivers/char/s390/vmcp.h
-0x10	10-1F	arch/s390/include/uapi/sclp_ctl.h
-0x10	20-2F	arch/s390/include/uapi/asm/hypfs.h
-0x12	all	linux/fs.h
-		linux/blkpg.h
-0x1b	all	InfiniBand Subsystem	<http://infiniband.sourceforge.net/>
-0x20	all	drivers/cdrom/cm206.h
-0x22	all	scsi/sg.h
-'!'	00-1F	uapi/linux/seccomp.h
-'#'	00-3F	IEEE 1394 Subsystem	Block for the entire subsystem
-'$'	00-0F	linux/perf_counter.h, linux/perf_event.h
-'%'	00-0F	include/uapi/linux/stm.h
-					System Trace Module subsystem
-					<mailto:alexander.shishkin@linux.intel.com>
-'&'	00-07	drivers/firewire/nosy-user.h
-'1'	00-1F	<linux/timepps.h>	PPS kit from Ulrich Windl
-					<ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/>
-'2'	01-04	linux/i2o.h
-'3'	00-0F	drivers/s390/char/raw3270.h	conflict!
-'3'	00-1F	linux/suspend_ioctls.h	conflict!
-		and kernel/power/user.c
-'8'	all				SNP8023 advanced NIC card
-					<mailto:mcr@solidum.com>
-';'	64-7F	linux/vfio.h
-'@'	00-0F	linux/radeonfb.h	conflict!
-'@'	00-0F	drivers/video/aty/aty128fb.c	conflict!
-'A'	00-1F	linux/apm_bios.h	conflict!
-'A'	00-0F	linux/agpgart.h		conflict!
-		and drivers/char/agp/compat_ioctl.h
-'A'	00-7F	sound/asound.h		conflict!
-'B'	00-1F	linux/cciss_ioctl.h	conflict!
-'B'	00-0F	include/linux/pmu.h	conflict!
-'B'	C0-FF				advanced bbus
-					<mailto:maassen@uni-freiburg.de>
-'C'	all	linux/soundcard.h	conflict!
-'C'	01-2F	linux/capi.h		conflict!
-'C'	F0-FF	drivers/net/wan/cosa.h	conflict!
-'D'	all	arch/s390/include/asm/dasd.h
-'D'	40-5F	drivers/scsi/dpt/dtpi_ioctl.h
-'D'	05	drivers/scsi/pmcraid.h
-'E'	all	linux/input.h		conflict!
-'E'	00-0F	xen/evtchn.h		conflict!
-'F'	all	linux/fb.h		conflict!
-'F'	01-02	drivers/scsi/pmcraid.h	conflict!
-'F'	20	drivers/video/fsl-diu-fb.h	conflict!
-'F'	20	drivers/video/intelfb/intelfb.h	conflict!
-'F'	20	linux/ivtvfb.h		conflict!
-'F'	20	linux/matroxfb.h	conflict!
-'F'	20	drivers/video/aty/atyfb_base.c	conflict!
-'F'	00-0F	video/da8xx-fb.h	conflict!
-'F'	80-8F	linux/arcfb.h		conflict!
-'F'	DD	video/sstfb.h		conflict!
-'G'	00-3F	drivers/misc/sgi-gru/grulib.h	conflict!
-'G'	00-0F	linux/gigaset_dev.h	conflict!
-'H'	00-7F	linux/hiddev.h		conflict!
-'H'	00-0F	linux/hidraw.h		conflict!
-'H'	01	linux/mei.h		conflict!
-'H'	02	linux/mei.h		conflict!
-'H'	03	linux/mei.h		conflict!
-'H'	00-0F	sound/asound.h		conflict!
-'H'	20-40	sound/asound_fm.h	conflict!
-'H'	80-8F	sound/sfnt_info.h	conflict!
-'H'	10-8F	sound/emu10k1.h		conflict!
-'H'	10-1F	sound/sb16_csp.h	conflict!
-'H'	10-1F	sound/hda_hwdep.h	conflict!
-'H'	40-4F	sound/hdspm.h		conflict!
-'H'	40-4F	sound/hdsp.h		conflict!
-'H'	90	sound/usb/usx2y/usb_stream.h
-'H'	A0	uapi/linux/usb/cdc-wdm.h
-'H'	C0-F0	net/bluetooth/hci.h	conflict!
-'H'	C0-DF	net/bluetooth/hidp/hidp.h	conflict!
-'H'	C0-DF	net/bluetooth/cmtp/cmtp.h	conflict!
-'H'	C0-DF	net/bluetooth/bnep/bnep.h	conflict!
-'H'	F1	linux/hid-roccat.h	<mailto:erazor_de@users.sourceforge.net>
-'H'	F8-FA	sound/firewire.h
-'I'	all	linux/isdn.h		conflict!
-'I'	00-0F	drivers/isdn/divert/isdn_divert.h	conflict!
-'I'	40-4F	linux/mISDNif.h		conflict!
-'J'	00-1F	drivers/scsi/gdth_ioctl.h
-'K'	all	linux/kd.h
-'L'	00-1F	linux/loop.h		conflict!
-'L'	10-1F	drivers/scsi/mpt3sas/mpt3sas_ctl.h	conflict!
-'L'	20-2F	linux/lightnvm.h
-'L'	E0-FF	linux/ppdd.h		encrypted disk device driver
-					<http://linux01.gwdg.de/~alatham/ppdd.html>
-'M'	all	linux/soundcard.h	conflict!
-'M'	01-16	mtd/mtd-abi.h		conflict!
-		and drivers/mtd/mtdchar.c
-'M'	01-03	drivers/scsi/megaraid/megaraid_sas.h
-'M'	00-0F	drivers/video/fsl-diu-fb.h	conflict!
-'N'	00-1F	drivers/usb/scanner.h
-'N'	40-7F	drivers/block/nvme.c
-'O'     00-06   mtd/ubi-user.h		UBI
-'P'	all	linux/soundcard.h	conflict!
-'P'	60-6F	sound/sscape_ioctl.h	conflict!
-'P'	00-0F	drivers/usb/class/usblp.c	conflict!
-'P'	01-09	drivers/misc/pci_endpoint_test.c	conflict!
-'Q'	all	linux/soundcard.h
-'R'	00-1F	linux/random.h		conflict!
-'R'	01	linux/rfkill.h		conflict!
-'R'	C0-DF	net/bluetooth/rfcomm.h
-'S'	all	linux/cdrom.h		conflict!
-'S'	80-81	scsi/scsi_ioctl.h	conflict!
-'S'	82-FF	scsi/scsi.h		conflict!
-'S'	00-7F	sound/asequencer.h	conflict!
-'T'	all	linux/soundcard.h	conflict!
-'T'	00-AF	sound/asound.h		conflict!
-'T'	all	arch/x86/include/asm/ioctls.h	conflict!
-'T'	C0-DF	linux/if_tun.h		conflict!
-'U'	all	sound/asound.h		conflict!
-'U'	00-CF	linux/uinput.h		conflict!
-'U'	00-EF	linux/usbdevice_fs.h
-'U'	C0-CF	drivers/bluetooth/hci_uart.h
-'V'	all	linux/vt.h		conflict!
-'V'	all	linux/videodev2.h	conflict!
-'V'	C0	linux/ivtvfb.h		conflict!
-'V'	C0	linux/ivtv.h		conflict!
-'V'	C0	media/davinci/vpfe_capture.h	conflict!
-'V'	C0	media/si4713.h		conflict!
-'W'	00-1F	linux/watchdog.h	conflict!
-'W'	00-1F	linux/wanrouter.h	conflict!		(pre 3.9)
-'W'	00-3F	sound/asound.h		conflict!
-'W'	40-5F   drivers/pci/switch/switchtec.c
-'X'	all	fs/xfs/xfs_fs.h		conflict!
-		and fs/xfs/linux-2.6/xfs_ioctl32.h
-		and include/linux/falloc.h
-		and linux/fs.h
-'X'	all	fs/ocfs2/ocfs_fs.h	conflict!
-'X'	01	linux/pktcdvd.h		conflict!
-'Y'	all	linux/cyclades.h
-'Z'	14-15	drivers/message/fusion/mptctl.h
-'['	00-3F	linux/usb/tmc.h		USB Test and Measurement Devices
-					<mailto:gregkh@linuxfoundation.org>
-'a'	all	linux/atm*.h, linux/sonet.h	ATM on linux
-					<http://lrcwww.epfl.ch/>
-'a'	00-0F	drivers/crypto/qat/qat_common/adf_cfg_common.h	conflict! qat driver
-'b'	00-FF				conflict! bit3 vme host bridge
-					<mailto:natalia@nikhefk.nikhef.nl>
-'c'	all	linux/cm4000_cs.h	conflict!
-'c'	00-7F	linux/comstats.h	conflict!
-'c'	00-7F	linux/coda.h		conflict!
-'c'	00-1F	linux/chio.h		conflict!
-'c'	80-9F	arch/s390/include/asm/chsc.h	conflict!
-'c'	A0-AF   arch/x86/include/asm/msr.h	conflict!
-'d'	00-FF	linux/char/drm/drm.h	conflict!
-'d'	02-40	pcmcia/ds.h		conflict!
-'d'	F0-FF	linux/digi1.h
-'e'	all	linux/digi1.h		conflict!
-'f'	00-1F	linux/ext2_fs.h		conflict!
-'f'	00-1F	linux/ext3_fs.h		conflict!
-'f'	00-0F	fs/jfs/jfs_dinode.h	conflict!
-'f'	00-0F	fs/ext4/ext4.h		conflict!
-'f'	00-0F	linux/fs.h		conflict!
-'f'	00-0F	fs/ocfs2/ocfs2_fs.h	conflict!
-'g'	00-0F	linux/usb/gadgetfs.h
-'g'	20-2F	linux/usb/g_printer.h
-'h'	00-7F				conflict! Charon filesystem
-					<mailto:zapman@interlan.net>
-'h'	00-1F	linux/hpet.h		conflict!
-'h'	80-8F	fs/hfsplus/ioctl.c
-'i'	00-3F	linux/i2o-dev.h		conflict!
-'i'	0B-1F	linux/ipmi.h		conflict!
-'i'	80-8F	linux/i8k.h
-'j'	00-3F	linux/joystick.h
-'k'	00-0F	linux/spi/spidev.h	conflict!
-'k'	00-05	video/kyro.h		conflict!
-'k'	10-17	linux/hsi/hsi_char.h	HSI character device
-'l'	00-3F	linux/tcfs_fs.h		transparent cryptographic file system
-					<http://web.archive.org/web/*/http://mikonos.dia.unisa.it/tcfs>
-'l'	40-7F	linux/udf_fs_i.h	in development:
-					<http://sourceforge.net/projects/linux-udf/>
-'m'	00-09	linux/mmtimer.h		conflict!
-'m'	all	linux/mtio.h		conflict!
-'m'	all	linux/soundcard.h	conflict!
-'m'	all	linux/synclink.h	conflict!
-'m'	00-19	drivers/message/fusion/mptctl.h	conflict!
-'m'	00	drivers/scsi/megaraid/megaraid_ioctl.h	conflict!
-'n'	00-7F	linux/ncp_fs.h and fs/ncpfs/ioctl.c
-'n'	80-8F	uapi/linux/nilfs2_api.h	NILFS2
-'n'	E0-FF	linux/matroxfb.h	matroxfb
-'o'	00-1F	fs/ocfs2/ocfs2_fs.h	OCFS2
-'o'     00-03   mtd/ubi-user.h		conflict! (OCFS2 and UBI overlaps)
-'o'     40-41   mtd/ubi-user.h		UBI
-'o'     01-A1   linux/dvb/*.h		DVB
-'p'	00-0F	linux/phantom.h		conflict! (OpenHaptics needs this)
-'p'	00-1F	linux/rtc.h		conflict!
-'p'	00-3F	linux/mc146818rtc.h	conflict!
-'p'	40-7F	linux/nvram.h
-'p'	80-9F	linux/ppdev.h		user-space parport
-					<mailto:tim@cyberelk.net>
-'p'	A1-A5	linux/pps.h		LinuxPPS
-					<mailto:giometti@linux.it>
-'q'	00-1F	linux/serio.h
-'q'	80-FF	linux/telephony.h	Internet PhoneJACK, Internet LineJACK
-		linux/ixjuser.h		<http://web.archive.org/web/*/http://www.quicknet.net>
-'r'	00-1F	linux/msdos_fs.h and fs/fat/dir.c
-'s'	all	linux/cdk.h
-'t'	00-7F	linux/ppp-ioctl.h
-'t'	80-8F	linux/isdn_ppp.h
-'t'	90-91	linux/toshiba.h		toshiba and toshiba_acpi SMM
-'u'	00-1F	linux/smb_fs.h		gone
-'u'	20-3F	linux/uvcvideo.h	USB video class host driver
-'u'	40-4f	linux/udmabuf.h		userspace dma-buf misc device
-'v'	00-1F	linux/ext2_fs.h		conflict!
-'v'	00-1F	linux/fs.h		conflict!
-'v'	00-0F	linux/sonypi.h		conflict!
-'v'	00-0F	media/v4l2-subdev.h	conflict!
-'v'	C0-FF	linux/meye.h		conflict!
-'w'	all				CERN SCI driver
-'y'	00-1F				packet based user level communications
-					<mailto:zapman@interlan.net>
-'z'	00-3F				CAN bus card	conflict!
-					<mailto:hdstich@connectu.ulm.circular.de>
-'z'	40-7F				CAN bus card	conflict!
-					<mailto:oe@port.de>
-'z'	10-4F	drivers/s390/crypto/zcrypt_api.h	conflict!
-'|'	00-7F	linux/media.h
-0x80	00-1F	linux/fb.h
-0x89	00-06	arch/x86/include/asm/sockios.h
-0x89	0B-DF	linux/sockios.h
-0x89	E0-EF	linux/sockios.h		SIOCPROTOPRIVATE range
-0x89	E0-EF	linux/dn.h		PROTOPRIVATE range
-0x89	F0-FF	linux/sockios.h		SIOCDEVPRIVATE range
-0x8B	all	linux/wireless.h
-0x8C	00-3F				WiNRADiO driver
-					<http://www.winradio.com.au/>
-0x90	00	drivers/cdrom/sbpcd.h
-0x92	00-0F	drivers/usb/mon/mon_bin.c
-0x93	60-7F	linux/auto_fs.h
-0x94	all	fs/btrfs/ioctl.h	Btrfs filesystem
-		and linux/fs.h		some lifted to vfs/generic
-0x97	00-7F	fs/ceph/ioctl.h		Ceph file system
-0x99	00-0F				537-Addinboard driver
-					<mailto:buk@buks.ipn.de>
-0xA0	all	linux/sdp/sdp.h		Industrial Device Project
-					<mailto:kenji@bitgate.com>
-0xA1	0	linux/vtpm_proxy.h	TPM Emulator Proxy Driver
-0xA3	80-8F	Port ACL		in development:
-					<mailto:tlewis@mindspring.com>
-0xA3	90-9F	linux/dtlk.h
-0xA4	00-1F	uapi/linux/tee.h	Generic TEE subsystem
-0xAA	00-3F	linux/uapi/linux/userfaultfd.h
-0xAB	00-1F	linux/nbd.h
-0xAC	00-1F	linux/raw.h
-0xAD	00	Netfilter device	in development:
-					<mailto:rusty@rustcorp.com.au>
-0xAE	all	linux/kvm.h		Kernel-based Virtual Machine
-					<mailto:kvm@vger.kernel.org>
-0xAF	00-1F	linux/fsl_hypervisor.h	Freescale hypervisor
-0xB0	all	RATIO devices		in development:
-					<mailto:vgo@ratio.de>
-0xB1	00-1F	PPPoX			<mailto:mostrows@styx.uwaterloo.ca>
-0xB3	00	linux/mmc/ioctl.h
-0xB4	00-0F	linux/gpio.h		<mailto:linux-gpio@vger.kernel.org>
-0xB5	00-0F	uapi/linux/rpmsg.h	<mailto:linux-remoteproc@vger.kernel.org>
-0xB6	all	linux/fpga-dfl.h
-0xC0	00-0F	linux/usb/iowarrior.h
-0xCA	00-0F	uapi/misc/cxl.h
-0xCA	10-2F	uapi/misc/ocxl.h
-0xCA	80-BF	uapi/scsi/cxlflash_ioctl.h
-0xCB	00-1F	CBM serial IEC bus	in development:
-					<mailto:michael.klein@puffin.lb.shuttle.de>
-0xCC	00-0F	drivers/misc/ibmvmc.h    pseries VMC driver
-0xCD	01	linux/reiserfs_fs.h
-0xCF	02	fs/cifs/ioctl.c
-0xDB	00-0F	drivers/char/mwave/mwavepub.h
-0xDD	00-3F	ZFCP device driver	see drivers/s390/scsi/
-					<mailto:aherrman@de.ibm.com>
-0xE5	00-3F	linux/fuse.h
-0xEC	00-01	drivers/platform/chrome/cros_ec_dev.h	ChromeOS EC driver
-0xF3	00-3F	drivers/usb/misc/sisusbvga/sisusb.h	sisfb (in development)
-					<mailto:thomas@winischhofer.net>
-0xF4	00-1F	video/mbxfb.h		mbxfb
-					<mailto:raph@8d.com>
-0xF6	all	LTTng			Linux Trace Toolkit Next Generation
-					<mailto:mathieu.desnoyers@efficios.com>
-0xFD	all	linux/dm-ioctl.h
diff --git a/Documentation/process/submit-checklist.rst b/Documentation/process/submit-checklist.rst
index 365efc9e4aa8..8e56337d422d 100644
--- a/Documentation/process/submit-checklist.rst
+++ b/Documentation/process/submit-checklist.rst
@@ -107,7 +107,7 @@ and elsewhere regarding submitting Linux kernel patches.
     and why.
 
 26) If any ioctl's are added by the patch, then also update
-    ``Documentation/ioctl/ioctl-number.txt``.
+    ``Documentation/ioctl/ioctl-number.rst``.
 
 27) If your modified source code depends on or uses any of the kernel
     APIs or features that are related to the following ``Kconfig`` symbols,
diff --git a/Documentation/translations/it_IT/process/submit-checklist.rst b/Documentation/translations/it_IT/process/submit-checklist.rst
index ea74cae958d7..995ee69fab11 100644
--- a/Documentation/translations/it_IT/process/submit-checklist.rst
+++ b/Documentation/translations/it_IT/process/submit-checklist.rst
@@ -117,7 +117,7 @@ sottomissione delle patch, in particolare
     sorgenti che ne spieghi la logica: cosa fanno e perché.
 
 25) Se la patch aggiunge nuove chiamate ioctl, allora aggiornate
-    ``Documentation/ioctl/ioctl-number.txt``.
+    ``Documentation/ioctl/ioctl-number.rst``.
 
 26) Se il codice che avete modificato dipende o usa una qualsiasi interfaccia o
     funzionalità del kernel che è associata a uno dei seguenti simboli
diff --git a/Documentation/translations/zh_CN/process/submit-checklist.rst b/Documentation/translations/zh_CN/process/submit-checklist.rst
index f4785d2b0491..8738c55e42a2 100644
--- a/Documentation/translations/zh_CN/process/submit-checklist.rst
+++ b/Documentation/translations/zh_CN/process/submit-checklist.rst
@@ -97,7 +97,7 @@ Linux内核补丁提交清单
 24) 所有内存屏障例如 ``barrier()``, ``rmb()``, ``wmb()`` 都需要源代码中的注
     释来解释它们正在执行的操作及其原因的逻辑。
 
-25) 如果补丁添加了任何ioctl,那么也要更新 ``Documentation/ioctl/ioctl-number.txt``
+25) 如果补丁添加了任何ioctl,那么也要更新 ``Documentation/ioctl/ioctl-number.rst``
 
 26) 如果修改后的源代码依赖或使用与以下 ``Kconfig`` 符号相关的任何内核API或
     功能,则在禁用相关 ``Kconfig`` 符号和/或 ``=m`` (如果该选项可用)的情况
diff --git a/include/uapi/rdma/rdma_user_ioctl_cmds.h b/include/uapi/rdma/rdma_user_ioctl_cmds.h
index 06c34d99be85..ed93f22c4573 100644
--- a/include/uapi/rdma/rdma_user_ioctl_cmds.h
+++ b/include/uapi/rdma/rdma_user_ioctl_cmds.h
@@ -36,7 +36,7 @@
 #include <linux/types.h>
 #include <linux/ioctl.h>
 
-/* Documentation/ioctl/ioctl-number.txt */
+/* Documentation/ioctl/ioctl-number.rst */
 #define RDMA_IOCTL_MAGIC	0x1b
 #define RDMA_VERBS_IOCTL \
 	_IOWR(RDMA_IOCTL_MAGIC, 1, struct ib_uverbs_ioctl_hdr)
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 65/79] docs: ioctl: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (60 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 64/79] docs: ioctl-number.txt: convert it to ReST format Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 66/79] docs: namespaces: " Mauro Carvalho Chehab
                     ` (15 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Maarten Lankhorst, Maxime Ripard, Sean Paul,
	David Airlie, Daniel Vetter, dri-devel

Rename the iio documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

The cdrom.txt and hdio.txt have their own particular syntax.
In order to speedup the conversion, I used a small ancillary
perl script:

	my $d;
	$d .= $_ while(<>);
	$d =~ s/(\nCDROM\S+)\s+(\w[^\n]*)/$1\n\t$2\n/g;
	$d =~ s/(\nHDIO\S+)\s+(\w[^\n]*)/$1\n\t$2\n/g;
	$d =~ s/(\n\s*usage:)[\s\n]*(\w[^\n]*)/$1:\n\n\t  $2\n/g;
	$d =~ s/(\n\s*)(E\w+[\s\n]*\w[^\n]*)/$1- $2/g;
	$d =~ s/(\n\s*)(inputs|outputs|notes):\s*(\w[^\n]*)/$1$2:\n\t\t$3\n/g;
	print $d;

It basically add blank lines on a few interesting places. The
script is not perfect: still several things require manual work,
but it saved quite some time doing some obvious stuff.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 ...g-up-ioctls.txt => botching-up-ioctls.rst} |    1 +
 Documentation/ioctl/cdrom.rst                 | 1233 +++++++++++++++++
 Documentation/ioctl/cdrom.txt                 |  967 -------------
 Documentation/ioctl/{hdio.txt => hdio.rst}    |  835 +++++++----
 Documentation/ioctl/index.rst                 |   16 +
 ...{ioctl-decoding.txt => ioctl-decoding.rst} |   13 +-
 drivers/gpu/drm/drm_ioctl.c                   |    2 +-
 7 files changed, 1814 insertions(+), 1253 deletions(-)
 rename Documentation/ioctl/{botching-up-ioctls.txt => botching-up-ioctls.rst} (99%)
 create mode 100644 Documentation/ioctl/cdrom.rst
 delete mode 100644 Documentation/ioctl/cdrom.txt
 rename Documentation/ioctl/{hdio.txt => hdio.rst} (54%)
 create mode 100644 Documentation/ioctl/index.rst
 rename Documentation/ioctl/{ioctl-decoding.txt => ioctl-decoding.rst} (54%)

diff --git a/Documentation/ioctl/botching-up-ioctls.txt b/Documentation/ioctl/botching-up-ioctls.rst
similarity index 99%
rename from Documentation/ioctl/botching-up-ioctls.txt
rename to Documentation/ioctl/botching-up-ioctls.rst
index 883fb034bd04..ac697fef3545 100644
--- a/Documentation/ioctl/botching-up-ioctls.txt
+++ b/Documentation/ioctl/botching-up-ioctls.rst
@@ -1,3 +1,4 @@
+=================================
 (How to avoid) Botching up ioctls
 =================================
 
diff --git a/Documentation/ioctl/cdrom.rst b/Documentation/ioctl/cdrom.rst
new file mode 100644
index 000000000000..3b4c0506de46
--- /dev/null
+++ b/Documentation/ioctl/cdrom.rst
@@ -0,0 +1,1233 @@
+============================
+Summary of CDROM ioctl calls
+============================
+
+- Edward A. Falk <efalk@google.com>
+
+November, 2004
+
+This document attempts to describe the ioctl(2) calls supported by
+the CDROM layer.  These are by-and-large implemented (as of Linux 2.6)
+in drivers/cdrom/cdrom.c and drivers/block/scsi_ioctl.c
+
+ioctl values are listed in <linux/cdrom.h>.  As of this writing, they
+are as follows:
+
+	======================	===============================================
+	CDROMPAUSE		Pause Audio Operation
+	CDROMRESUME		Resume paused Audio Operation
+	CDROMPLAYMSF		Play Audio MSF (struct cdrom_msf)
+	CDROMPLAYTRKIND		Play Audio Track/index (struct cdrom_ti)
+	CDROMREADTOCHDR		Read TOC header (struct cdrom_tochdr)
+	CDROMREADTOCENTRY	Read TOC entry (struct cdrom_tocentry)
+	CDROMSTOP		Stop the cdrom drive
+	CDROMSTART		Start the cdrom drive
+	CDROMEJECT		Ejects the cdrom media
+	CDROMVOLCTRL		Control output volume (struct cdrom_volctrl)
+	CDROMSUBCHNL		Read subchannel data (struct cdrom_subchnl)
+	CDROMREADMODE2		Read CDROM mode 2 data (2336 Bytes)
+				(struct cdrom_read)
+	CDROMREADMODE1		Read CDROM mode 1 data (2048 Bytes)
+				(struct cdrom_read)
+	CDROMREADAUDIO		(struct cdrom_read_audio)
+	CDROMEJECT_SW		enable(1)/disable(0) auto-ejecting
+	CDROMMULTISESSION	Obtain the start-of-last-session
+				address of multi session disks
+				(struct cdrom_multisession)
+	CDROM_GET_MCN		Obtain the "Universal Product Code"
+				if available (struct cdrom_mcn)
+	CDROM_GET_UPC		Deprecated, use CDROM_GET_MCN instead.
+	CDROMRESET		hard-reset the drive
+	CDROMVOLREAD		Get the drive's volume setting
+				(struct cdrom_volctrl)
+	CDROMREADRAW		read data in raw mode (2352 Bytes)
+				(struct cdrom_read)
+	CDROMREADCOOKED		read data in cooked mode
+	CDROMSEEK		seek msf address
+	CDROMPLAYBLK		scsi-cd only, (struct cdrom_blk)
+	CDROMREADALL		read all 2646 bytes
+	CDROMGETSPINDOWN	return 4-bit spindown value
+	CDROMSETSPINDOWN	set 4-bit spindown value
+	CDROMCLOSETRAY		pendant of CDROMEJECT
+	CDROM_SET_OPTIONS	Set behavior options
+	CDROM_CLEAR_OPTIONS	Clear behavior options
+	CDROM_SELECT_SPEED	Set the CD-ROM speed
+	CDROM_SELECT_DISC	Select disc (for juke-boxes)
+	CDROM_MEDIA_CHANGED	Check is media changed
+	CDROM_DRIVE_STATUS	Get tray position, etc.
+	CDROM_DISC_STATUS	Get disc type, etc.
+	CDROM_CHANGER_NSLOTS	Get number of slots
+	CDROM_LOCKDOOR		lock or unlock door
+	CDROM_DEBUG		Turn debug messages on/off
+	CDROM_GET_CAPABILITY	get capabilities
+	CDROMAUDIOBUFSIZ	set the audio buffer size
+	DVD_READ_STRUCT		Read structure
+	DVD_WRITE_STRUCT	Write structure
+	DVD_AUTH		Authentication
+	CDROM_SEND_PACKET	send a packet to the drive
+	CDROM_NEXT_WRITABLE	get next writable block
+	CDROM_LAST_WRITTEN	get last block written on disc
+	======================	===============================================
+
+
+The information that follows was determined from reading kernel source
+code.  It is likely that some corrections will be made over time.
+
+------------------------------------------------------------------------------
+
+General:
+
+	Unless otherwise specified, all ioctl calls return 0 on success
+	and -1 with errno set to an appropriate value on error.  (Some
+	ioctls return non-negative data values.)
+
+	Unless otherwise specified, all ioctl calls return -1 and set
+	errno to EFAULT on a failed attempt to copy data to or from user
+	address space.
+
+	Individual drivers may return error codes not listed here.
+
+	Unless otherwise specified, all data structures and constants
+	are defined in <linux/cdrom.h>
+
+------------------------------------------------------------------------------
+
+
+CDROMPAUSE
+	Pause Audio Operation
+
+
+	usage::
+
+	  ioctl(fd, CDROMPAUSE, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+
+
+CDROMRESUME
+	Resume paused Audio Operation
+
+
+	usage::
+
+	  ioctl(fd, CDROMRESUME, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+
+
+CDROMPLAYMSF
+	Play Audio MSF
+
+	(struct cdrom_msf)
+
+
+	usage::
+
+	  struct cdrom_msf msf;
+
+	  ioctl(fd, CDROMPLAYMSF, &msf);
+
+	inputs:
+		cdrom_msf structure, describing a segment of music to play
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+
+	notes:
+		- MSF stands for minutes-seconds-frames
+		- LBA stands for logical block address
+		- Segment is described as start and end times, where each time
+		  is described as minutes:seconds:frames.
+		  A frame is 1/75 of a second.
+
+
+CDROMPLAYTRKIND
+	Play Audio Track/index
+
+	(struct cdrom_ti)
+
+
+	usage::
+
+	  struct cdrom_ti ti;
+
+	  ioctl(fd, CDROMPLAYTRKIND, &ti);
+
+	inputs:
+		cdrom_ti structure, describing a segment of music to play
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+
+	notes:
+		- Segment is described as start and end times, where each time
+		  is described as a track and an index.
+
+
+
+CDROMREADTOCHDR
+	Read TOC header
+
+	(struct cdrom_tochdr)
+
+
+	usage::
+
+	  cdrom_tochdr header;
+
+	  ioctl(fd, CDROMREADTOCHDR, &header);
+
+	inputs:
+		cdrom_tochdr structure
+
+
+	outputs:
+		cdrom_tochdr structure
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+
+
+
+CDROMREADTOCENTRY
+	Read TOC entry
+
+	(struct cdrom_tocentry)
+
+
+	usage::
+
+	  struct cdrom_tocentry entry;
+
+	  ioctl(fd, CDROMREADTOCENTRY, &entry);
+
+	inputs:
+		cdrom_tocentry structure
+
+
+	outputs:
+		cdrom_tocentry structure
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+	  - EINVAL	entry.cdte_format not CDROM_MSF or CDROM_LBA
+	  - EINVAL	requested track out of bounds
+	  - EIO		I/O error reading TOC
+
+	notes:
+		- TOC stands for Table Of Contents
+		- MSF stands for minutes-seconds-frames
+		- LBA stands for logical block address
+
+
+
+CDROMSTOP
+	Stop the cdrom drive
+
+
+	usage::
+
+	  ioctl(fd, CDROMSTOP, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+
+	notes:
+	  - Exact interpretation of this ioctl depends on the device,
+	    but most seem to spin the drive down.
+
+
+CDROMSTART
+	Start the cdrom drive
+
+
+	usage::
+
+	  ioctl(fd, CDROMSTART, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+
+	notes:
+	  - Exact interpretation of this ioctl depends on the device,
+	    but most seem to spin the drive up and/or close the tray.
+	    Other devices ignore the ioctl completely.
+
+
+CDROMEJECT
+	- Ejects the cdrom media
+
+
+	usage::
+
+	  ioctl(fd, CDROMEJECT, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		none
+
+
+	error returns:
+	  - ENOSYS	cd drive not capable of ejecting
+	  - EBUSY	other processes are accessing drive, or door is locked
+
+	notes:
+		- See CDROM_LOCKDOOR, below.
+
+
+
+
+CDROMCLOSETRAY
+	pendant of CDROMEJECT
+
+
+	usage::
+
+	  ioctl(fd, CDROMCLOSETRAY, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		none
+
+
+	error returns:
+	  - ENOSYS	cd drive not capable of closing the tray
+	  - EBUSY	other processes are accessing drive, or door is locked
+
+	notes:
+		- See CDROM_LOCKDOOR, below.
+
+
+
+
+CDROMVOLCTRL
+	Control output volume (struct cdrom_volctrl)
+
+
+	usage::
+
+	  struct cdrom_volctrl volume;
+
+	  ioctl(fd, CDROMVOLCTRL, &volume);
+
+	inputs:
+		cdrom_volctrl structure containing volumes for up to 4
+		channels.
+
+	outputs:
+		none
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+
+
+
+CDROMVOLREAD
+	Get the drive's volume setting
+
+	(struct cdrom_volctrl)
+
+
+	usage::
+
+	  struct cdrom_volctrl volume;
+
+	  ioctl(fd, CDROMVOLREAD, &volume);
+
+	inputs:
+		none
+
+
+	outputs:
+		The current volume settings.
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+
+
+
+CDROMSUBCHNL
+	Read subchannel data
+
+	(struct cdrom_subchnl)
+
+
+	usage::
+
+	  struct cdrom_subchnl q;
+
+	  ioctl(fd, CDROMSUBCHNL, &q);
+
+	inputs:
+		cdrom_subchnl structure
+
+
+	outputs:
+		cdrom_subchnl structure
+
+
+	error return:
+	  - ENOSYS	cd drive not audio-capable.
+	  - EINVAL	format not CDROM_MSF or CDROM_LBA
+
+	notes:
+		- Format is converted to CDROM_MSF or CDROM_LBA
+		  as per user request on return
+
+
+
+CDROMREADRAW
+	read data in raw mode (2352 Bytes)
+
+	(struct cdrom_read)
+
+	usage::
+
+	  union {
+
+	    struct cdrom_msf msf;		/* input */
+	    char buffer[CD_FRAMESIZE_RAW];	/* return */
+	  } arg;
+	  ioctl(fd, CDROMREADRAW, &arg);
+
+	inputs:
+		cdrom_msf structure indicating an address to read.
+
+		Only the start values are significant.
+
+	outputs:
+		Data written to address provided by user.
+
+
+	error return:
+	  - EINVAL	address less than 0, or msf less than 0:2:0
+	  - ENOMEM	out of memory
+
+	notes:
+		- As of 2.6.8.1, comments in <linux/cdrom.h> indicate that this
+		  ioctl accepts a cdrom_read structure, but actual source code
+		  reads a cdrom_msf structure and writes a buffer of data to
+		  the same address.
+
+		- MSF values are converted to LBA values via this formula::
+
+		    lba = (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
+
+
+
+
+CDROMREADMODE1
+	Read CDROM mode 1 data (2048 Bytes)
+
+	(struct cdrom_read)
+
+	notes:
+		Identical to CDROMREADRAW except that block size is
+		CD_FRAMESIZE (2048) bytes
+
+
+
+CDROMREADMODE2
+	Read CDROM mode 2 data (2336 Bytes)
+
+	(struct cdrom_read)
+
+	notes:
+		Identical to CDROMREADRAW except that block size is
+		CD_FRAMESIZE_RAW0 (2336) bytes
+
+
+
+CDROMREADAUDIO
+	(struct cdrom_read_audio)
+
+	usage::
+
+	  struct cdrom_read_audio ra;
+
+	  ioctl(fd, CDROMREADAUDIO, &ra);
+
+	inputs:
+		cdrom_read_audio structure containing read start
+		point and length
+
+	outputs:
+		audio data, returned to buffer indicated by ra
+
+
+	error return:
+	  - EINVAL	format not CDROM_MSF or CDROM_LBA
+	  - EINVAL	nframes not in range [1 75]
+	  - ENXIO	drive has no queue (probably means invalid fd)
+	  - ENOMEM	out of memory
+
+
+CDROMEJECT_SW
+	enable(1)/disable(0) auto-ejecting
+
+
+	usage::
+
+	  int val;
+
+	  ioctl(fd, CDROMEJECT_SW, val);
+
+	inputs:
+		Flag specifying auto-eject flag.
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - ENOSYS	Drive is not capable of ejecting.
+	  - EBUSY	Door is locked
+
+
+
+
+CDROMMULTISESSION
+	Obtain the start-of-last-session address of multi session disks
+
+	(struct cdrom_multisession)
+
+	usage::
+
+	  struct cdrom_multisession ms_info;
+
+	  ioctl(fd, CDROMMULTISESSION, &ms_info);
+
+	inputs:
+		cdrom_multisession structure containing desired
+
+	  format.
+
+	outputs:
+		cdrom_multisession structure is filled with last_session
+		information.
+
+	error return:
+	  - EINVAL	format not CDROM_MSF or CDROM_LBA
+
+
+CDROM_GET_MCN
+	Obtain the "Universal Product Code"
+	if available
+
+	(struct cdrom_mcn)
+
+
+	usage::
+
+	  struct cdrom_mcn mcn;
+
+	  ioctl(fd, CDROM_GET_MCN, &mcn);
+
+	inputs:
+		none
+
+
+	outputs:
+		Universal Product Code
+
+
+	error return:
+	  - ENOSYS	Drive is not capable of reading MCN data.
+
+	notes:
+		- Source code comments state::
+
+		    The following function is implemented, although very few
+		    audio discs give Universal Product Code information, which
+		    should just be the Medium Catalog Number on the box.  Note,
+		    that the way the code is written on the CD is /not/ uniform
+		    across all discs!
+
+
+
+
+CDROM_GET_UPC
+	CDROM_GET_MCN  (deprecated)
+
+
+	Not implemented, as of 2.6.8.1
+
+
+
+CDROMRESET
+	hard-reset the drive
+
+
+	usage::
+
+	  ioctl(fd, CDROMRESET, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - ENOSYS	Drive is not capable of resetting.
+
+
+
+
+CDROMREADCOOKED
+	read data in cooked mode
+
+
+	usage::
+
+	  u8 buffer[CD_FRAMESIZE]
+
+	  ioctl(fd, CDROMREADCOOKED, buffer);
+
+	inputs:
+		none
+
+
+	outputs:
+		2048 bytes of data, "cooked" mode.
+
+
+	notes:
+		Not implemented on all drives.
+
+
+
+
+
+CDROMREADALL
+	read all 2646 bytes
+
+
+	Same as CDROMREADCOOKED, but reads 2646 bytes.
+
+
+
+CDROMSEEK
+	seek msf address
+
+
+	usage::
+
+	  struct cdrom_msf msf;
+
+	  ioctl(fd, CDROMSEEK, &msf);
+
+	inputs:
+		MSF address to seek to.
+
+
+	outputs:
+		none
+
+
+
+
+CDROMPLAYBLK
+	scsi-cd only
+
+	(struct cdrom_blk)
+
+
+	usage::
+
+	  struct cdrom_blk blk;
+
+	  ioctl(fd, CDROMPLAYBLK, &blk);
+
+	inputs:
+		Region to play
+
+
+	outputs:
+		none
+
+
+
+
+CDROMGETSPINDOWN
+	usage::
+
+	  char spindown;
+
+	  ioctl(fd, CDROMGETSPINDOWN, &spindown);
+
+	inputs:
+		none
+
+
+	outputs:
+		The value of the current 4-bit spindown value.
+
+
+
+
+
+CDROMSETSPINDOWN
+	usage::
+
+	  char spindown
+
+	  ioctl(fd, CDROMSETSPINDOWN, &spindown);
+
+	inputs:
+		4-bit value used to control spindown (TODO: more detail here)
+
+
+	outputs:
+		none
+
+
+
+
+
+
+CDROM_SET_OPTIONS
+	Set behavior options
+
+
+	usage::
+
+	  int options;
+
+	  ioctl(fd, CDROM_SET_OPTIONS, options);
+
+	inputs:
+		New values for drive options.  The logical 'or' of:
+
+	    ==============      ==================================
+	    CDO_AUTO_CLOSE	close tray on first open(2)
+	    CDO_AUTO_EJECT	open tray on last release
+	    CDO_USE_FFLAGS	use O_NONBLOCK information on open
+	    CDO_LOCK		lock tray on open files
+	    CDO_CHECK_TYPE	check type on open for data
+	    ==============      ==================================
+
+	outputs:
+		Returns the resulting options settings in the
+		ioctl return value.  Returns -1 on error.
+
+	error return:
+	  - ENOSYS	selected option(s) not supported by drive.
+
+
+
+
+CDROM_CLEAR_OPTIONS
+	Clear behavior options
+
+
+	Same as CDROM_SET_OPTIONS, except that selected options are
+	turned off.
+
+
+
+CDROM_SELECT_SPEED
+	Set the CD-ROM speed
+
+
+	usage::
+
+	  int speed;
+
+	  ioctl(fd, CDROM_SELECT_SPEED, speed);
+
+	inputs:
+		New drive speed.
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - ENOSYS	speed selection not supported by drive.
+
+
+
+CDROM_SELECT_DISC
+	Select disc (for juke-boxes)
+
+
+	usage::
+
+	  int disk;
+
+	  ioctl(fd, CDROM_SELECT_DISC, disk);
+
+	inputs:
+		Disk to load into drive.
+
+
+	outputs:
+		none
+
+
+	error return:
+	  - EINVAL	Disk number beyond capacity of drive
+
+
+
+CDROM_MEDIA_CHANGED
+	Check is media changed
+
+
+	usage::
+
+	  int slot;
+
+	  ioctl(fd, CDROM_MEDIA_CHANGED, slot);
+
+	inputs:
+		Slot number to be tested, always zero except for jukeboxes.
+
+		May also be special values CDSL_NONE or CDSL_CURRENT
+
+	outputs:
+		Ioctl return value is 0 or 1 depending on whether the media
+
+	  has been changed, or -1 on error.
+
+	error returns:
+	  - ENOSYS	Drive can't detect media change
+	  - EINVAL	Slot number beyond capacity of drive
+	  - ENOMEM	Out of memory
+
+
+
+CDROM_DRIVE_STATUS
+	Get tray position, etc.
+
+
+	usage::
+
+	  int slot;
+
+	  ioctl(fd, CDROM_DRIVE_STATUS, slot);
+
+	inputs:
+		Slot number to be tested, always zero except for jukeboxes.
+
+		May also be special values CDSL_NONE or CDSL_CURRENT
+
+	outputs:
+		Ioctl return value will be one of the following values
+
+	  from <linux/cdrom.h>:
+
+	    =================== ==========================
+	    CDS_NO_INFO		Information not available.
+	    CDS_NO_DISC
+	    CDS_TRAY_OPEN
+	    CDS_DRIVE_NOT_READY
+	    CDS_DISC_OK
+	    -1			error
+	    =================== ==========================
+
+	error returns:
+	  - ENOSYS	Drive can't detect drive status
+	  - EINVAL	Slot number beyond capacity of drive
+	  - ENOMEM	Out of memory
+
+
+
+
+CDROM_DISC_STATUS
+	Get disc type, etc.
+
+
+	usage::
+
+	  ioctl(fd, CDROM_DISC_STATUS, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		Ioctl return value will be one of the following values
+
+	  from <linux/cdrom.h>:
+
+	    - CDS_NO_INFO
+	    - CDS_AUDIO
+	    - CDS_MIXED
+	    - CDS_XA_2_2
+	    - CDS_XA_2_1
+	    - CDS_DATA_1
+
+	error returns:
+		none at present
+
+	notes:
+	    - Source code comments state::
+
+
+		Ok, this is where problems start.  The current interface for
+		the CDROM_DISC_STATUS ioctl is flawed.  It makes the false
+		assumption that CDs are all CDS_DATA_1 or all CDS_AUDIO, etc.
+		Unfortunately, while this is often the case, it is also
+		very common for CDs to have some tracks with data, and some
+		tracks with audio.	Just because I feel like it, I declare
+		the following to be the best way to cope.  If the CD has
+		ANY data tracks on it, it will be returned as a data CD.
+		If it has any XA tracks, I will return it as that.	Now I
+		could simplify this interface by combining these returns with
+		the above, but this more clearly demonstrates the problem
+		with the current interface.  Too bad this wasn't designed
+		to use bitmasks...	       -Erik
+
+		Well, now we have the option CDS_MIXED: a mixed-type CD.
+		User level programmers might feel the ioctl is not very
+		useful.
+				---david
+
+
+
+
+CDROM_CHANGER_NSLOTS
+	Get number of slots
+
+
+	usage::
+
+	  ioctl(fd, CDROM_CHANGER_NSLOTS, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		The ioctl return value will be the number of slots in a
+		CD changer.  Typically 1 for non-multi-disk devices.
+
+	error returns:
+		none
+
+
+
+CDROM_LOCKDOOR
+	lock or unlock door
+
+
+	usage::
+
+	  int lock;
+
+	  ioctl(fd, CDROM_LOCKDOOR, lock);
+
+	inputs:
+		Door lock flag, 1=lock, 0=unlock
+
+
+	outputs:
+		none
+
+
+	error returns:
+	  - EDRIVE_CANT_DO_THIS
+
+				Door lock function not supported.
+	  - EBUSY
+
+				Attempt to unlock when multiple users
+				have the drive open and not CAP_SYS_ADMIN
+
+	notes:
+		As of 2.6.8.1, the lock flag is a global lock, meaning that
+		all CD drives will be locked or unlocked together.  This is
+		probably a bug.
+
+		The EDRIVE_CANT_DO_THIS value is defined in <linux/cdrom.h>
+		and is currently (2.6.8.1) the same as EOPNOTSUPP
+
+
+
+CDROM_DEBUG
+	Turn debug messages on/off
+
+
+	usage::
+
+	  int debug;
+
+	  ioctl(fd, CDROM_DEBUG, debug);
+
+	inputs:
+		Cdrom debug flag, 0=disable, 1=enable
+
+
+	outputs:
+		The ioctl return value will be the new debug flag.
+
+
+	error return:
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+
+
+
+CDROM_GET_CAPABILITY
+	get capabilities
+
+
+	usage::
+
+	  ioctl(fd, CDROM_GET_CAPABILITY, 0);
+
+
+	inputs:
+		none
+
+
+	outputs:
+		The ioctl return value is the current device capability
+		flags.  See CDC_CLOSE_TRAY, CDC_OPEN_TRAY, etc.
+
+
+
+CDROMAUDIOBUFSIZ
+	set the audio buffer size
+
+
+	usage::
+
+	  int arg;
+
+	  ioctl(fd, CDROMAUDIOBUFSIZ, val);
+
+	inputs:
+		New audio buffer size
+
+
+	outputs:
+		The ioctl return value is the new audio buffer size, or -1
+		on error.
+
+	error return:
+	  - ENOSYS	Not supported by this driver.
+
+	notes:
+		Not supported by all drivers.
+
+
+
+
+DVD_READ_STRUCT			Read structure
+
+	usage::
+
+	  dvd_struct s;
+
+	  ioctl(fd, DVD_READ_STRUCT, &s);
+
+	inputs:
+		dvd_struct structure, containing:
+
+	    =================== ==========================================
+	    type		specifies the information desired, one of
+				DVD_STRUCT_PHYSICAL, DVD_STRUCT_COPYRIGHT,
+				DVD_STRUCT_DISCKEY, DVD_STRUCT_BCA,
+				DVD_STRUCT_MANUFACT
+	    physical.layer_num	desired layer, indexed from 0
+	    copyright.layer_num	desired layer, indexed from 0
+	    disckey.agid
+	    =================== ==========================================
+
+	outputs:
+		dvd_struct structure, containing:
+
+	    =================== ================================
+	    physical		for type == DVD_STRUCT_PHYSICAL
+	    copyright		for type == DVD_STRUCT_COPYRIGHT
+	    disckey.value	for type == DVD_STRUCT_DISCKEY
+	    bca.{len,value}	for type == DVD_STRUCT_BCA
+	    manufact.{len,valu}	for type == DVD_STRUCT_MANUFACT
+	    =================== ================================
+
+	error returns:
+	  - EINVAL	physical.layer_num exceeds number of layers
+	  - EIO		Received invalid response from drive
+
+
+
+DVD_WRITE_STRUCT		Write structure
+
+	Not implemented, as of 2.6.8.1
+
+
+
+DVD_AUTH			Authentication
+
+	usage::
+
+	  dvd_authinfo ai;
+
+	  ioctl(fd, DVD_AUTH, &ai);
+
+	inputs:
+		dvd_authinfo structure.  See <linux/cdrom.h>
+
+
+	outputs:
+		dvd_authinfo structure.
+
+
+	error return:
+	  - ENOTTY	ai.type not recognized.
+
+
+
+CDROM_SEND_PACKET
+	send a packet to the drive
+
+
+	usage::
+
+	  struct cdrom_generic_command cgc;
+
+	  ioctl(fd, CDROM_SEND_PACKET, &cgc);
+
+	inputs:
+		cdrom_generic_command structure containing the packet to send.
+
+
+	outputs:
+		none
+
+	  cdrom_generic_command structure containing results.
+
+	error return:
+	  - EIO
+
+			command failed.
+	  - EPERM
+
+			Operation not permitted, either because a
+			write command was attempted on a drive which
+			is opened read-only, or because the command
+			requires CAP_SYS_RAWIO
+	  - EINVAL
+
+			cgc.data_direction not set
+
+
+
+CDROM_NEXT_WRITABLE
+	get next writable block
+
+
+	usage::
+
+	  long next;
+
+	  ioctl(fd, CDROM_NEXT_WRITABLE, &next);
+
+	inputs:
+		none
+
+
+	outputs:
+		The next writable block.
+
+
+	notes:
+		If the device does not support this ioctl directly, the
+
+	  ioctl will return CDROM_LAST_WRITTEN + 7.
+
+
+
+CDROM_LAST_WRITTEN
+	get last block written on disc
+
+
+	usage::
+
+	  long last;
+
+	  ioctl(fd, CDROM_LAST_WRITTEN, &last);
+
+	inputs:
+		none
+
+
+	outputs:
+		The last block written on disc
+
+
+	notes:
+		If the device does not support this ioctl directly, the
+		result is derived from the disc's table of contents.  If the
+		table of contents can't be read, this ioctl returns an
+		error.
diff --git a/Documentation/ioctl/cdrom.txt b/Documentation/ioctl/cdrom.txt
deleted file mode 100644
index a4d62a9d6771..000000000000
--- a/Documentation/ioctl/cdrom.txt
+++ /dev/null
@@ -1,967 +0,0 @@
-		Summary of CDROM ioctl calls.
-		============================
-
-		Edward A. Falk <efalk@google.com>
-
-		November, 2004
-
-This document attempts to describe the ioctl(2) calls supported by
-the CDROM layer.  These are by-and-large implemented (as of Linux 2.6)
-in drivers/cdrom/cdrom.c and drivers/block/scsi_ioctl.c
-
-ioctl values are listed in <linux/cdrom.h>.  As of this writing, they
-are as follows:
-
-	CDROMPAUSE		Pause Audio Operation
-	CDROMRESUME		Resume paused Audio Operation
-	CDROMPLAYMSF		Play Audio MSF (struct cdrom_msf)
-	CDROMPLAYTRKIND		Play Audio Track/index (struct cdrom_ti)
-	CDROMREADTOCHDR		Read TOC header (struct cdrom_tochdr)
-	CDROMREADTOCENTRY	Read TOC entry (struct cdrom_tocentry)
-	CDROMSTOP		Stop the cdrom drive
-	CDROMSTART		Start the cdrom drive
-	CDROMEJECT		Ejects the cdrom media
-	CDROMVOLCTRL		Control output volume (struct cdrom_volctrl)
-	CDROMSUBCHNL		Read subchannel data (struct cdrom_subchnl)
-	CDROMREADMODE2		Read CDROM mode 2 data (2336 Bytes)
-					   (struct cdrom_read)
-	CDROMREADMODE1		Read CDROM mode 1 data (2048 Bytes)
-					   (struct cdrom_read)
-	CDROMREADAUDIO		(struct cdrom_read_audio)
-	CDROMEJECT_SW		enable(1)/disable(0) auto-ejecting
-	CDROMMULTISESSION	Obtain the start-of-last-session
-				  address of multi session disks
-				  (struct cdrom_multisession)
-	CDROM_GET_MCN		Obtain the "Universal Product Code"
-				   if available (struct cdrom_mcn)
-	CDROM_GET_UPC		Deprecated, use CDROM_GET_MCN instead.
-	CDROMRESET		hard-reset the drive
-	CDROMVOLREAD		Get the drive's volume setting
-					  (struct cdrom_volctrl)
-	CDROMREADRAW		read data in raw mode (2352 Bytes)
-					   (struct cdrom_read)
-	CDROMREADCOOKED		read data in cooked mode
-	CDROMSEEK		seek msf address
-	CDROMPLAYBLK		scsi-cd only, (struct cdrom_blk)
-	CDROMREADALL		read all 2646 bytes
-	CDROMGETSPINDOWN	return 4-bit spindown value
-	CDROMSETSPINDOWN	set 4-bit spindown value
-	CDROMCLOSETRAY		pendant of CDROMEJECT
-	CDROM_SET_OPTIONS	Set behavior options
-	CDROM_CLEAR_OPTIONS	Clear behavior options
-	CDROM_SELECT_SPEED	Set the CD-ROM speed
-	CDROM_SELECT_DISC	Select disc (for juke-boxes)
-	CDROM_MEDIA_CHANGED	Check is media changed
-	CDROM_DRIVE_STATUS	Get tray position, etc.
-	CDROM_DISC_STATUS	Get disc type, etc.
-	CDROM_CHANGER_NSLOTS	Get number of slots
-	CDROM_LOCKDOOR		lock or unlock door
-	CDROM_DEBUG		Turn debug messages on/off
-	CDROM_GET_CAPABILITY	get capabilities
-	CDROMAUDIOBUFSIZ	set the audio buffer size
-	DVD_READ_STRUCT		Read structure
-	DVD_WRITE_STRUCT	Write structure
-	DVD_AUTH		Authentication
-	CDROM_SEND_PACKET	send a packet to the drive
-	CDROM_NEXT_WRITABLE	get next writable block
-	CDROM_LAST_WRITTEN	get last block written on disc
-
-
-The information that follows was determined from reading kernel source
-code.  It is likely that some corrections will be made over time.
-
-
-
-
-
-
-
-General:
-
-	Unless otherwise specified, all ioctl calls return 0 on success
-	and -1 with errno set to an appropriate value on error.  (Some
-	ioctls return non-negative data values.)
-
-	Unless otherwise specified, all ioctl calls return -1 and set
-	errno to EFAULT on a failed attempt to copy data to or from user
-	address space.
-
-	Individual drivers may return error codes not listed here.
-
-	Unless otherwise specified, all data structures and constants
-	are defined in <linux/cdrom.h>
-
-
-
-
-CDROMPAUSE			Pause Audio Operation
-
-	usage:
-
-	  ioctl(fd, CDROMPAUSE, 0);
-
-	inputs:		none
-
-	outputs:	none
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-
-
-CDROMRESUME			Resume paused Audio Operation
-
-	usage:
-
-	  ioctl(fd, CDROMRESUME, 0);
-
-	inputs:		none
-
-	outputs:	none
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-
-
-CDROMPLAYMSF			Play Audio MSF (struct cdrom_msf)
-
-	usage:
-
-	  struct cdrom_msf msf;
-	  ioctl(fd, CDROMPLAYMSF, &msf);
-
-	inputs:
-	  cdrom_msf structure, describing a segment of music to play
-
-	outputs:	none
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-
-	notes:
-	  MSF stands for minutes-seconds-frames
-	  LBA stands for logical block address
-
-	  Segment is described as start and end times, where each time
-	  is described as minutes:seconds:frames.  A frame is 1/75 of
-	  a second.
-
-
-CDROMPLAYTRKIND			Play Audio Track/index (struct cdrom_ti)
-
-	usage:
-
-	  struct cdrom_ti ti;
-	  ioctl(fd, CDROMPLAYTRKIND, &ti);
-
-	inputs:
-	  cdrom_ti structure, describing a segment of music to play
-
-	outputs:	none
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-
-	notes:
-	  Segment is described as start and end times, where each time
-	  is described as a track and an index.
-
-
-
-CDROMREADTOCHDR			Read TOC header (struct cdrom_tochdr)
-
-	usage:
-
-	  cdrom_tochdr header;
-	  ioctl(fd, CDROMREADTOCHDR, &header);
-
-	inputs:
-	  cdrom_tochdr structure
-
-	outputs:
-	  cdrom_tochdr structure
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-
-
-
-CDROMREADTOCENTRY		Read TOC entry (struct cdrom_tocentry)
-
-	usage:
-
-	  struct cdrom_tocentry entry;
-	  ioctl(fd, CDROMREADTOCENTRY, &entry);
-
-	inputs:
-	  cdrom_tocentry structure
-
-	outputs:
-	  cdrom_tocentry structure
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-	  EINVAL	entry.cdte_format not CDROM_MSF or CDROM_LBA
-	  EINVAL	requested track out of bounds
-	  EIO		I/O error reading TOC
-
-	notes:
-	  TOC stands for Table Of Contents
-	  MSF stands for minutes-seconds-frames
-	  LBA stands for logical block address
-
-
-
-CDROMSTOP			Stop the cdrom drive
-
-	usage:
-
-	  ioctl(fd, CDROMSTOP, 0);
-
-	inputs:		none
-
-	outputs:	none
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-
-	notes:
-	  Exact interpretation of this ioctl depends on the device,
-	  but most seem to spin the drive down.
-
-
-CDROMSTART			Start the cdrom drive
-
-	usage:
-
-	  ioctl(fd, CDROMSTART, 0);
-
-	inputs:		none
-
-	outputs:	none
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-
-	notes:
-	  Exact interpretation of this ioctl depends on the device,
-	  but most seem to spin the drive up and/or close the tray.
-	  Other devices ignore the ioctl completely.
-
-
-CDROMEJECT			Ejects the cdrom media
-
-	usage:
-
-	  ioctl(fd, CDROMEJECT, 0);
-
-	inputs:		none
-
-	outputs:	none
-
-	error returns:
-	  ENOSYS	cd drive not capable of ejecting
-	  EBUSY		other processes are accessing drive, or door is locked
-
-	notes:
-	  See CDROM_LOCKDOOR, below.
-
-
-
-CDROMCLOSETRAY			pendant of CDROMEJECT
-
-	usage:
-
-	  ioctl(fd, CDROMCLOSETRAY, 0);
-
-	inputs:		none
-
-	outputs:	none
-
-	error returns:
-	  ENOSYS	cd drive not capable of closing the tray
-	  EBUSY		other processes are accessing drive, or door is locked
-
-	notes:
-	  See CDROM_LOCKDOOR, below.
-
-
-
-CDROMVOLCTRL			Control output volume (struct cdrom_volctrl)
-
-	usage:
-
-	  struct cdrom_volctrl volume;
-	  ioctl(fd, CDROMVOLCTRL, &volume);
-
-	inputs:
-	  cdrom_volctrl structure containing volumes for up to 4
-	  channels.
-
-	outputs:	none
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-
-
-
-CDROMVOLREAD			Get the drive's volume setting
-					  (struct cdrom_volctrl)
-
-	usage:
-
-	  struct cdrom_volctrl volume;
-	  ioctl(fd, CDROMVOLREAD, &volume);
-
-	inputs:		none
-
-	outputs:
-	  The current volume settings.
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-
-
-
-CDROMSUBCHNL			Read subchannel data (struct cdrom_subchnl)
-
-	usage:
-
-	  struct cdrom_subchnl q;
-	  ioctl(fd, CDROMSUBCHNL, &q);
-
-	inputs:
-	  cdrom_subchnl structure
-
-	outputs:
-	  cdrom_subchnl structure
-
-	error return:
-	  ENOSYS	cd drive not audio-capable.
-	  EINVAL	format not CDROM_MSF or CDROM_LBA
-
-	notes:
-	  Format is converted to CDROM_MSF or CDROM_LBA
-	  as per user request on return
-
-
-
-CDROMREADRAW			read data in raw mode (2352 Bytes)
-					   (struct cdrom_read)
-
-	usage:
-
-	  union {
-	    struct cdrom_msf msf;		/* input */
-	    char buffer[CD_FRAMESIZE_RAW];	/* return */
-	  } arg;
-	  ioctl(fd, CDROMREADRAW, &arg);
-
-	inputs:
-	  cdrom_msf structure indicating an address to read.
-	  Only the start values are significant.
-
-	outputs:
-	  Data written to address provided by user.
-
-	error return:
-	  EINVAL	address less than 0, or msf less than 0:2:0
-	  ENOMEM	out of memory
-
-	notes:
-	  As of 2.6.8.1, comments in <linux/cdrom.h> indicate that this
-	  ioctl accepts a cdrom_read structure, but actual source code
-	  reads a cdrom_msf structure and writes a buffer of data to
-	  the same address.
-
-	  MSF values are converted to LBA values via this formula:
-
-	    lba = (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
-
-
-
-
-CDROMREADMODE1			Read CDROM mode 1 data (2048 Bytes)
-					   (struct cdrom_read)
-
-	notes:
-	  Identical to CDROMREADRAW except that block size is
-	  CD_FRAMESIZE (2048) bytes
-
-
-
-CDROMREADMODE2			Read CDROM mode 2 data (2336 Bytes)
-					   (struct cdrom_read)
-
-	notes:
-	  Identical to CDROMREADRAW except that block size is
-	  CD_FRAMESIZE_RAW0 (2336) bytes
-
-
-
-CDROMREADAUDIO			(struct cdrom_read_audio)
-
-	usage:
-
-	  struct cdrom_read_audio ra;
-	  ioctl(fd, CDROMREADAUDIO, &ra);
-
-	inputs:
-	  cdrom_read_audio structure containing read start
-	  point and length
-
-	outputs:
-	  audio data, returned to buffer indicated by ra
-
-	error return:
-	  EINVAL	format not CDROM_MSF or CDROM_LBA
-	  EINVAL	nframes not in range [1 75]
-	  ENXIO		drive has no queue (probably means invalid fd)
-	  ENOMEM	out of memory
-
-
-CDROMEJECT_SW			enable(1)/disable(0) auto-ejecting
-
-	usage:
-
-	  int val;
-	  ioctl(fd, CDROMEJECT_SW, val);
-
-	inputs:
-	  Flag specifying auto-eject flag.
-
-	outputs:	none
-
-	error return:
-	  ENOSYS	Drive is not capable of ejecting.
-	  EBUSY		Door is locked
-
-
-
-
-CDROMMULTISESSION		Obtain the start-of-last-session
-				  address of multi session disks
-				  (struct cdrom_multisession)
-	usage:
-
-	  struct cdrom_multisession ms_info;
-	  ioctl(fd, CDROMMULTISESSION, &ms_info);
-
-	inputs:
-	  cdrom_multisession structure containing desired
-	  format.
-
-	outputs:
-	  cdrom_multisession structure is filled with last_session
-	  information.
-
-	error return:
-	  EINVAL	format not CDROM_MSF or CDROM_LBA
-
-
-CDROM_GET_MCN			Obtain the "Universal Product Code"
-				   if available (struct cdrom_mcn)
-
-	usage:
-
-	  struct cdrom_mcn mcn;
-	  ioctl(fd, CDROM_GET_MCN, &mcn);
-
-	inputs:		none
-
-	outputs:
-	  Universal Product Code
-
-	error return:
-	  ENOSYS	Drive is not capable of reading MCN data.
-
-	notes:
-	  Source code comments state:
-
-	    The following function is implemented, although very few
-	    audio discs give Universal Product Code information, which
-	    should just be the Medium Catalog Number on the box.  Note,
-	    that the way the code is written on the CD is /not/ uniform
-	    across all discs!
-
-
-
-
-CDROM_GET_UPC			CDROM_GET_MCN  (deprecated)
-
-	Not implemented, as of 2.6.8.1
-
-
-
-CDROMRESET			hard-reset the drive
-
-	usage:
-
-	  ioctl(fd, CDROMRESET, 0);
-
-	inputs:		none
-
-	outputs:	none
-
-	error return:
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  ENOSYS	Drive is not capable of resetting.
-
-
-
-
-CDROMREADCOOKED			read data in cooked mode
-
-	usage:
-
-	  u8 buffer[CD_FRAMESIZE]
-	  ioctl(fd, CDROMREADCOOKED, buffer);
-
-	inputs:		none
-
-	outputs:
-	  2048 bytes of data, "cooked" mode.
-
-	notes:
-	  Not implemented on all drives.
-
-
-
-
-CDROMREADALL			read all 2646 bytes
-
-	Same as CDROMREADCOOKED, but reads 2646 bytes.
-
-
-
-CDROMSEEK			seek msf address
-
-	usage:
-
-	  struct cdrom_msf msf;
-	  ioctl(fd, CDROMSEEK, &msf);
-
-	inputs:
-	  MSF address to seek to.
-
-	outputs:	none
-
-
-
-CDROMPLAYBLK			scsi-cd only, (struct cdrom_blk)
-
-	usage:
-
-	  struct cdrom_blk blk;
-	  ioctl(fd, CDROMPLAYBLK, &blk);
-
-	inputs:
-	  Region to play
-
-	outputs:	none
-
-
-
-CDROMGETSPINDOWN
-
-	usage:
-
-	  char spindown;
-	  ioctl(fd, CDROMGETSPINDOWN, &spindown);
-
-	inputs:		none
-
-	outputs:
-	  The value of the current 4-bit spindown value.
-
-
-
-
-CDROMSETSPINDOWN
-
-	usage:
-
-	  char spindown
-	  ioctl(fd, CDROMSETSPINDOWN, &spindown);
-
-	inputs:
-	  4-bit value used to control spindown (TODO: more detail here)
-
-	outputs:	none
-
-
-
-
-
-CDROM_SET_OPTIONS		Set behavior options
-
-	usage:
-
-	  int options;
-	  ioctl(fd, CDROM_SET_OPTIONS, options);
-
-	inputs:
-	  New values for drive options.  The logical 'or' of:
-	    CDO_AUTO_CLOSE	close tray on first open(2)
-	    CDO_AUTO_EJECT	open tray on last release
-	    CDO_USE_FFLAGS	use O_NONBLOCK information on open
-	    CDO_LOCK		lock tray on open files
-	    CDO_CHECK_TYPE	check type on open for data
-
-	outputs:
-	  Returns the resulting options settings in the
-	  ioctl return value.  Returns -1 on error.
-
-	error return:
-	  ENOSYS	selected option(s) not supported by drive.
-
-
-
-
-CDROM_CLEAR_OPTIONS		Clear behavior options
-
-	Same as CDROM_SET_OPTIONS, except that selected options are
-	turned off.
-
-
-
-CDROM_SELECT_SPEED		Set the CD-ROM speed
-
-	usage:
-
-	  int speed;
-	  ioctl(fd, CDROM_SELECT_SPEED, speed);
-
-	inputs:
-	  New drive speed.
-
-	outputs:	none
-
-	error return:
-	  ENOSYS	speed selection not supported by drive.
-
-
-
-CDROM_SELECT_DISC		Select disc (for juke-boxes)
-
-	usage:
-
-	  int disk;
-	  ioctl(fd, CDROM_SELECT_DISC, disk);
-
-	inputs:
-	  Disk to load into drive.
-
-	outputs:	none
-
-	error return:
-	  EINVAL	Disk number beyond capacity of drive
-
-
-
-CDROM_MEDIA_CHANGED		Check is media changed
-
-	usage:
-
-	  int slot;
-	  ioctl(fd, CDROM_MEDIA_CHANGED, slot);
-
-	inputs:
-	  Slot number to be tested, always zero except for jukeboxes.
-	  May also be special values CDSL_NONE or CDSL_CURRENT
-
-	outputs:
-	  Ioctl return value is 0 or 1 depending on whether the media
-	  has been changed, or -1 on error.
-
-	error returns:
-	  ENOSYS	Drive can't detect media change
-	  EINVAL	Slot number beyond capacity of drive
-	  ENOMEM	Out of memory
-
-
-
-CDROM_DRIVE_STATUS		Get tray position, etc.
-
-	usage:
-
-	  int slot;
-	  ioctl(fd, CDROM_DRIVE_STATUS, slot);
-
-	inputs:
-	  Slot number to be tested, always zero except for jukeboxes.
-	  May also be special values CDSL_NONE or CDSL_CURRENT
-
-	outputs:
-	  Ioctl return value will be one of the following values
-	  from <linux/cdrom.h>:
-
-	    CDS_NO_INFO		Information not available.
-	    CDS_NO_DISC
-	    CDS_TRAY_OPEN
-	    CDS_DRIVE_NOT_READY
-	    CDS_DISC_OK
-	    -1			error
-
-	error returns:
-	  ENOSYS	Drive can't detect drive status
-	  EINVAL	Slot number beyond capacity of drive
-	  ENOMEM	Out of memory
-
-
-
-
-CDROM_DISC_STATUS		Get disc type, etc.
-
-	usage:
-
-	  ioctl(fd, CDROM_DISC_STATUS, 0);
-
-	inputs:		none
-
-	outputs:
-	  Ioctl return value will be one of the following values
-	  from <linux/cdrom.h>:
-	    CDS_NO_INFO
-	    CDS_AUDIO
-	    CDS_MIXED
-	    CDS_XA_2_2
-	    CDS_XA_2_1
-	    CDS_DATA_1
-
-	error returns:	none at present
-
-	notes:
-	  Source code comments state:
-
-	    Ok, this is where problems start.  The current interface for
-	    the CDROM_DISC_STATUS ioctl is flawed.  It makes the false
-	    assumption that CDs are all CDS_DATA_1 or all CDS_AUDIO, etc.
-	    Unfortunately, while this is often the case, it is also
-	    very common for CDs to have some tracks with data, and some
-	    tracks with audio.	Just because I feel like it, I declare
-	    the following to be the best way to cope.  If the CD has
-	    ANY data tracks on it, it will be returned as a data CD.
-	    If it has any XA tracks, I will return it as that.	Now I
-	    could simplify this interface by combining these returns with
-	    the above, but this more clearly demonstrates the problem
-	    with the current interface.  Too bad this wasn't designed
-	    to use bitmasks...	       -Erik
-
-	    Well, now we have the option CDS_MIXED: a mixed-type CD.
-	    User level programmers might feel the ioctl is not very
-	    useful.
-			---david
-
-
-
-
-CDROM_CHANGER_NSLOTS		Get number of slots
-
-	usage:
-
-	  ioctl(fd, CDROM_CHANGER_NSLOTS, 0);
-
-	inputs:		none
-
-	outputs:
-	  The ioctl return value will be the number of slots in a
-	  CD changer.  Typically 1 for non-multi-disk devices.
-
-	error returns:	none
-
-
-
-CDROM_LOCKDOOR			lock or unlock door
-
-	usage:
-
-	  int lock;
-	  ioctl(fd, CDROM_LOCKDOOR, lock);
-
-	inputs:
-	  Door lock flag, 1=lock, 0=unlock
-
-	outputs:	none
-
-	error returns:
-	  EDRIVE_CANT_DO_THIS	Door lock function not supported.
-	  EBUSY			Attempt to unlock when multiple users
-	  			have the drive open and not CAP_SYS_ADMIN
-
-	notes:
-	  As of 2.6.8.1, the lock flag is a global lock, meaning that
-	  all CD drives will be locked or unlocked together.  This is
-	  probably a bug.
-
-	  The EDRIVE_CANT_DO_THIS value is defined in <linux/cdrom.h>
-	  and is currently (2.6.8.1) the same as EOPNOTSUPP
-
-
-
-CDROM_DEBUG			Turn debug messages on/off
-
-	usage:
-
-	  int debug;
-	  ioctl(fd, CDROM_DEBUG, debug);
-
-	inputs:
-	  Cdrom debug flag, 0=disable, 1=enable
-
-	outputs:
-	  The ioctl return value will be the new debug flag.
-
-	error return:
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-
-
-
-CDROM_GET_CAPABILITY		get capabilities
-
-	usage:
-
-	  ioctl(fd, CDROM_GET_CAPABILITY, 0);
-
-	inputs:		none
-
-	outputs:
-	  The ioctl return value is the current device capability
-	  flags.  See CDC_CLOSE_TRAY, CDC_OPEN_TRAY, etc.
-
-
-
-CDROMAUDIOBUFSIZ		set the audio buffer size
-
-	usage:
-
-	  int arg;
-	  ioctl(fd, CDROMAUDIOBUFSIZ, val);
-
-	inputs:
-	  New audio buffer size
-
-	outputs:
-	  The ioctl return value is the new audio buffer size, or -1
-	  on error.
-
-	error return:
-	  ENOSYS	Not supported by this driver.
-
-	notes:
-	  Not supported by all drivers.
-
-
-
-DVD_READ_STRUCT			Read structure
-
-	usage:
-
-	  dvd_struct s;
-	  ioctl(fd, DVD_READ_STRUCT, &s);
-
-	inputs:
-	  dvd_struct structure, containing:
-	    type		specifies the information desired, one of
-	    			DVD_STRUCT_PHYSICAL, DVD_STRUCT_COPYRIGHT,
-				DVD_STRUCT_DISCKEY, DVD_STRUCT_BCA,
-				DVD_STRUCT_MANUFACT
-	    physical.layer_num	desired layer, indexed from 0
-	    copyright.layer_num	desired layer, indexed from 0
-	    disckey.agid
-
-	outputs:
-	  dvd_struct structure, containing:
-	    physical		for type == DVD_STRUCT_PHYSICAL
-	    copyright		for type == DVD_STRUCT_COPYRIGHT
-	    disckey.value	for type == DVD_STRUCT_DISCKEY
-	    bca.{len,value}	for type == DVD_STRUCT_BCA
-	    manufact.{len,valu}	for type == DVD_STRUCT_MANUFACT
-
-	error returns:
-	  EINVAL	physical.layer_num exceeds number of layers
-	  EIO		Received invalid response from drive
-
-
-
-DVD_WRITE_STRUCT		Write structure
-
-	Not implemented, as of 2.6.8.1
-
-
-
-DVD_AUTH			Authentication
-
-	usage:
-
-	  dvd_authinfo ai;
-	  ioctl(fd, DVD_AUTH, &ai);
-
-	inputs:
-	  dvd_authinfo structure.  See <linux/cdrom.h>
-
-	outputs:
-	  dvd_authinfo structure.
-
-	error return:
-	  ENOTTY	ai.type not recognized.
-
-
-
-CDROM_SEND_PACKET		send a packet to the drive
-
-	usage:
-
-	  struct cdrom_generic_command cgc;
-	  ioctl(fd, CDROM_SEND_PACKET, &cgc);
-
-	inputs:
-	  cdrom_generic_command structure containing the packet to send.
-
-	outputs:	none
-	  cdrom_generic_command structure containing results.
-
-	error return:
-	  EIO		command failed.
-	  EPERM		Operation not permitted, either because a
-			write command was attempted on a drive which
-			is opened read-only, or because the command
-			requires CAP_SYS_RAWIO
-	  EINVAL	cgc.data_direction not set
-
-
-
-CDROM_NEXT_WRITABLE		get next writable block
-
-	usage:
-
-	  long next;
-	  ioctl(fd, CDROM_NEXT_WRITABLE, &next);
-
-	inputs:		none
-
-	outputs:
-	  The next writable block.
-
-	notes:
-	  If the device does not support this ioctl directly, the
-	  ioctl will return CDROM_LAST_WRITTEN + 7.
-
-
-
-CDROM_LAST_WRITTEN		get last block written on disc
-
-	usage:
-
-	  long last;
-	  ioctl(fd, CDROM_LAST_WRITTEN, &last);
-
-	inputs:		none
-
-	outputs:
-	  The last block written on disc
-
-	notes:
-	  If the device does not support this ioctl directly, the
-	  result is derived from the disc's table of contents.  If the
-	  table of contents can't be read, this ioctl returns an
-	  error.
diff --git a/Documentation/ioctl/hdio.txt b/Documentation/ioctl/hdio.rst
similarity index 54%
rename from Documentation/ioctl/hdio.txt
rename to Documentation/ioctl/hdio.rst
index 18eb98c44ffe..e822e3dff176 100644
--- a/Documentation/ioctl/hdio.txt
+++ b/Documentation/ioctl/hdio.rst
@@ -1,9 +1,10 @@
-		Summary of HDIO_ ioctl calls.
-		============================
+==============================
+Summary of `HDIO_` ioctl calls
+==============================
 
-		Edward A. Falk <efalk@google.com>
+- Edward A. Falk <efalk@google.com>
 
-		November, 2004
+November, 2004
 
 This document attempts to describe the ioctl(2) calls supported by
 the HD/IDE layer.  These are by-and-large implemented (as of Linux 2.6)
@@ -14,6 +15,7 @@ are as follows:
 
     ioctls that pass argument pointers to user space:
 
+	=======================	=======================================
 	HDIO_GETGEO		get device geometry
 	HDIO_GET_UNMASKINTR	get current unmask setting
 	HDIO_GET_MULTCOUNT	get current IDE blockmode setting
@@ -36,9 +38,11 @@ are as follows:
 	HDIO_DRIVE_TASK		execute task and special drive command
 	HDIO_DRIVE_CMD		execute a special drive command
 	HDIO_DRIVE_CMD_AEB	HDIO_DRIVE_TASK
+	=======================	=======================================
 
     ioctls that pass non-pointer values:
 
+	=======================	=======================================
 	HDIO_SET_MULTCOUNT	change IDE blockmode
 	HDIO_SET_UNMASKINTR	permit other irqs during I/O
 	HDIO_SET_KEEPSETTINGS	keep ioctl settings on reset
@@ -57,16 +61,13 @@ are as follows:
 
 	HDIO_SET_IDE_SCSI	Set scsi emulation mode on/off
 	HDIO_SET_SCSI_IDE	not implemented yet
+	=======================	=======================================
 
 
 The information that follows was determined from reading kernel source
 code.  It is likely that some corrections will be made over time.
 
-
-
-
-
-
+------------------------------------------------------------------------------
 
 General:
 
@@ -80,459 +81,610 @@ General:
 	Unless otherwise specified, all data structures and constants
 	are defined in <linux/hdreg.h>
 
+------------------------------------------------------------------------------
 
+HDIO_GETGEO
+	get device geometry
 
-HDIO_GETGEO			get device geometry
 
-	usage:
+	usage::
 
 	  struct hd_geometry geom;
+
 	  ioctl(fd, HDIO_GETGEO, &geom);
 
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
+		hd_geometry structure containing:
 
-	  hd_geometry structure containing:
 
+	    =========	==================================
 	    heads	number of heads
 	    sectors	number of sectors/track
 	    cylinders	number of cylinders, mod 65536
 	    start	starting sector of this partition.
+	    =========	==================================
 
 
 	error returns:
-	  EINVAL	if the device is not a disk drive or floppy drive,
-	  		or if the user passes a null pointer
+	  - EINVAL
+
+			if the device is not a disk drive or floppy drive,
+			or if the user passes a null pointer
 
 
 	notes:
+		Not particularly useful with modern disk drives, whose geometry
+		is a polite fiction anyway.  Modern drives are addressed
+		purely by sector number nowadays (lba addressing), and the
+		drive geometry is an abstraction which is actually subject
+		to change.  Currently (as of Nov 2004), the geometry values
+		are the "bios" values -- presumably the values the drive had
+		when Linux first booted.
 
-	  Not particularly useful with modern disk drives, whose geometry
-	  is a polite fiction anyway.  Modern drives are addressed
-	  purely by sector number nowadays (lba addressing), and the
-	  drive geometry is an abstraction which is actually subject
-	  to change.  Currently (as of Nov 2004), the geometry values
-	  are the "bios" values -- presumably the values the drive had
-	  when Linux first booted.
+		In addition, the cylinders field of the hd_geometry is an
+		unsigned short, meaning that on most architectures, this
+		ioctl will not return a meaningful value on drives with more
+		than 65535 tracks.
 
-	  In addition, the cylinders field of the hd_geometry is an
-	  unsigned short, meaning that on most architectures, this
-	  ioctl will not return a meaningful value on drives with more
-	  than 65535 tracks.
+		The start field is unsigned long, meaning that it will not
+		contain a meaningful value for disks over 219 Gb in size.
 
-	  The start field is unsigned long, meaning that it will not
-	  contain a meaningful value for disks over 219 Gb in size.
 
 
 
+HDIO_GET_UNMASKINTR
+	get current unmask setting
 
-HDIO_GET_UNMASKINTR		get current unmask setting
 
-	usage:
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_GET_UNMASKINTR, &val);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  The value of the drive's current unmask setting
+		The value of the drive's current unmask setting
 
 
 
-HDIO_SET_UNMASKINTR		permit other irqs during I/O
 
-	usage:
+
+HDIO_SET_UNMASKINTR
+	permit other irqs during I/O
+
+
+	usage::
 
 	  unsigned long val;
+
 	  ioctl(fd, HDIO_SET_UNMASKINTR, val);
 
 	inputs:
-	  New value for unmask flag
+		New value for unmask flag
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 1]
-	  EBUSY		Controller busy
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 1]
+	  - EBUSY	Controller busy
 
 
 
 
-HDIO_GET_MULTCOUNT		get current IDE blockmode setting
+HDIO_GET_MULTCOUNT
+	get current IDE blockmode setting
 
-	usage:
+
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_GET_MULTCOUNT, &val);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  The value of the current IDE block mode setting.  This
-	  controls how many sectors the drive will transfer per
-	  interrupt.
+		The value of the current IDE block mode setting.  This
+		controls how many sectors the drive will transfer per
+		interrupt.
 
 
 
-HDIO_SET_MULTCOUNT		change IDE blockmode
+HDIO_SET_MULTCOUNT
+	change IDE blockmode
 
-	usage:
+
+	usage::
 
 	  int val;
+
 	  ioctl(fd, HDIO_SET_MULTCOUNT, val);
 
 	inputs:
-	  New value for IDE block mode setting.  This controls how many
-	  sectors the drive will transfer per interrupt.
+		New value for IDE block mode setting.  This controls how many
+		sectors the drive will transfer per interrupt.
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range supported by disk.
-	  EBUSY		Controller busy or blockmode already set.
-	  EIO		Drive did not accept new block mode.
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range supported by disk.
+	  - EBUSY	Controller busy or blockmode already set.
+	  - EIO		Drive did not accept new block mode.
 
 	notes:
-
-	  Source code comments read:
+	  Source code comments read::
 
 	    This is tightly woven into the driver->do_special cannot
 	    touch.  DON'T do it again until a total personality rewrite
 	    is committed.
 
 	  If blockmode has already been set, this ioctl will fail with
-	  EBUSY
+	  -EBUSY
 
 
 
-HDIO_GET_QDMA			get use-qdma flag
+HDIO_GET_QDMA
+	get use-qdma flag
+
 
 	Not implemented, as of 2.6.8.1
 
 
 
-HDIO_SET_XFER			set transfer rate via proc
+HDIO_SET_XFER
+	set transfer rate via proc
+
 
 	Not implemented, as of 2.6.8.1
 
 
 
-HDIO_OBSOLETE_IDENTITY		OBSOLETE, DO NOT USE
+HDIO_OBSOLETE_IDENTITY
+	OBSOLETE, DO NOT USE
+
 
 	Same as HDIO_GET_IDENTITY (see below), except that it only
 	returns the first 142 bytes of drive identity information.
 
 
 
-HDIO_GET_IDENTITY		get IDE identification info
+HDIO_GET_IDENTITY
+	get IDE identification info
 
-	usage:
+
+	usage::
 
 	  unsigned char identity[512];
+
 	  ioctl(fd, HDIO_GET_IDENTITY, identity);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-
-	  ATA drive identity information.  For full description, see
-	  the IDENTIFY DEVICE and IDENTIFY PACKET DEVICE commands in
-	  the ATA specification.
+		ATA drive identity information.  For full description, see
+		the IDENTIFY DEVICE and IDENTIFY PACKET DEVICE commands in
+		the ATA specification.
 
 	error returns:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  ENOMSG	IDENTIFY DEVICE information not available
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - ENOMSG	IDENTIFY DEVICE information not available
 
 	notes:
+		Returns information that was obtained when the drive was
+		probed.  Some of this information is subject to change, and
+		this ioctl does not re-probe the drive to update the
+		information.
 
-	  Returns information that was obtained when the drive was
-	  probed.  Some of this information is subject to change, and
-	  this ioctl does not re-probe the drive to update the
-	  information.
+		This information is also available from /proc/ide/hdX/identify
 
-	  This information is also available from /proc/ide/hdX/identify
 
 
+HDIO_GET_KEEPSETTINGS
+	get keep-settings-on-reset flag
 
-HDIO_GET_KEEPSETTINGS		get keep-settings-on-reset flag
 
-	usage:
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_GET_KEEPSETTINGS, &val);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  The value of the current "keep settings" flag
+		The value of the current "keep settings" flag
+
+
 
 	notes:
+		When set, indicates that kernel should restore settings
+		after a drive reset.
 
-	  When set, indicates that kernel should restore settings
-	  after a drive reset.
 
 
+HDIO_SET_KEEPSETTINGS
+	keep ioctl settings on reset
 
-HDIO_SET_KEEPSETTINGS		keep ioctl settings on reset
 
-	usage:
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_SET_KEEPSETTINGS, val);
 
 	inputs:
-	  New value for keep_settings flag
+		New value for keep_settings flag
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 1]
-	  EBUSY		Controller busy
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 1]
+	  - EBUSY		Controller busy
 
 
 
-HDIO_GET_32BIT			get current io_32bit setting
+HDIO_GET_32BIT
+	get current io_32bit setting
 
-	usage:
+
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_GET_32BIT, &val);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  The value of the current io_32bit setting
+		The value of the current io_32bit setting
+
+
 
 	notes:
+		0=16-bit, 1=32-bit, 2,3 = 32bit+sync
 
-	  0=16-bit, 1=32-bit, 2,3 = 32bit+sync
 
 
 
-HDIO_GET_NOWERR			get ignore-write-error flag
 
-	usage:
+HDIO_GET_NOWERR
+	get ignore-write-error flag
+
+
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_GET_NOWERR, &val);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  The value of the current ignore-write-error flag
+		The value of the current ignore-write-error flag
 
 
 
-HDIO_GET_DMA			get use-dma flag
 
-	usage:
+
+HDIO_GET_DMA
+	get use-dma flag
+
+
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_GET_DMA, &val);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  The value of the current use-dma flag
+		The value of the current use-dma flag
 
 
 
-HDIO_GET_NICE			get nice flags
 
-	usage:
+
+HDIO_GET_NICE
+	get nice flags
+
+
+	usage::
 
 	  long nice;
+
 	  ioctl(fd, HDIO_GET_NICE, &nice);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
+		The drive's "nice" values.
+
 
-	  The drive's "nice" values.
 
 	notes:
+		Per-drive flags which determine when the system will give more
+		bandwidth to other devices sharing the same IDE bus.
 
-	  Per-drive flags which determine when the system will give more
-	  bandwidth to other devices sharing the same IDE bus.
-	  See <linux/hdreg.h>, near symbol IDE_NICE_DSC_OVERLAP.
+		See <linux/hdreg.h>, near symbol IDE_NICE_DSC_OVERLAP.
 
 
 
 
-HDIO_SET_NICE			set nice flags
+HDIO_SET_NICE
+	set nice flags
 
-	usage:
+
+	usage::
 
 	  unsigned long nice;
+
 	  ...
 	  ioctl(fd, HDIO_SET_NICE, nice);
 
 	inputs:
-	  bitmask of nice flags.
+		bitmask of nice flags.
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error returns:
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EPERM		Flags other than DSC_OVERLAP and NICE_1 set.
-	  EPERM		DSC_OVERLAP specified but not supported by drive
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EPERM	Flags other than DSC_OVERLAP and NICE_1 set.
+	  - EPERM	DSC_OVERLAP specified but not supported by drive
 
 	notes:
+		This ioctl sets the DSC_OVERLAP and NICE_1 flags from values
+		provided by the user.
 
-	  This ioctl sets the DSC_OVERLAP and NICE_1 flags from values
-	  provided by the user.
+		Nice flags are listed in <linux/hdreg.h>, starting with
+		IDE_NICE_DSC_OVERLAP.  These values represent shifts.
 
-	  Nice flags are listed in <linux/hdreg.h>, starting with
-	  IDE_NICE_DSC_OVERLAP.  These values represent shifts.
 
 
 
 
+HDIO_GET_WCACHE
+	get write cache mode on|off
 
-HDIO_GET_WCACHE			get write cache mode on|off
 
-	usage:
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_GET_WCACHE, &val);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  The value of the current write cache mode
+		The value of the current write cache mode
 
 
 
-HDIO_GET_ACOUSTIC		get acoustic value
 
-	usage:
+
+HDIO_GET_ACOUSTIC
+	get acoustic value
+
+
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_GET_ACOUSTIC, &val);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  The value of the current acoustic settings
+		The value of the current acoustic settings
+
+
 
 	notes:
+		See HDIO_SET_ACOUSTIC
+
 
-	  See HDIO_SET_ACOUSTIC
 
 
 
 HDIO_GET_ADDRESS
+	usage::
 
-	usage:
 
 	  long val;
+
 	  ioctl(fd, HDIO_GET_ADDRESS, &val);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  The value of the current addressing mode:
-	    0 = 28-bit
-	    1 = 48-bit
-	    2 = 48-bit doing 28-bit
-	    3 = 64-bit
+		The value of the current addressing mode:
 
+	    =  ===================
+	    0  28-bit
+	    1  48-bit
+	    2  48-bit doing 28-bit
+	    3  64-bit
+	    =  ===================
 
 
-HDIO_GET_BUSSTATE		get the bus state of the hwif
 
-	usage:
+HDIO_GET_BUSSTATE
+	get the bus state of the hwif
+
+
+	usage::
 
 	  long state;
+
 	  ioctl(fd, HDIO_SCAN_HWIF, &state);
 
-	inputs:		none
+	inputs:
+		none
+
+
 
 	outputs:
-	  Current power state of the IDE bus.  One of BUSSTATE_OFF,
-	  BUSSTATE_ON, or BUSSTATE_TRISTATE
+		Current power state of the IDE bus.  One of BUSSTATE_OFF,
+		BUSSTATE_ON, or BUSSTATE_TRISTATE
 
 	error returns:
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
 
 
 
 
-HDIO_SET_BUSSTATE		set the bus state of the hwif
+HDIO_SET_BUSSTATE
+	set the bus state of the hwif
 
-	usage:
+
+	usage::
 
 	  int state;
+
 	  ...
 	  ioctl(fd, HDIO_SCAN_HWIF, state);
 
 	inputs:
-	  Desired IDE power state.  One of BUSSTATE_OFF, BUSSTATE_ON,
-	  or BUSSTATE_TRISTATE
+		Desired IDE power state.  One of BUSSTATE_OFF, BUSSTATE_ON,
+		or BUSSTATE_TRISTATE
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error returns:
-	  EACCES	Access denied:  requires CAP_SYS_RAWIO
-	  EOPNOTSUPP	Hardware interface does not support bus power control
+	  - EACCES	Access denied:  requires CAP_SYS_RAWIO
+	  - EOPNOTSUPP	Hardware interface does not support bus power control
 
 
 
 
-HDIO_TRISTATE_HWIF		execute a channel tristate
+HDIO_TRISTATE_HWIF
+	execute a channel tristate
+
 
 	Not implemented, as of 2.6.8.1.  See HDIO_SET_BUSSTATE
 
 
 
-HDIO_DRIVE_RESET		execute a device reset
+HDIO_DRIVE_RESET
+	execute a device reset
 
-	usage:
+
+	usage::
 
 	  int args[3]
+
 	  ...
 	  ioctl(fd, HDIO_DRIVE_RESET, args);
 
-	inputs:		none
+	inputs:
+		none
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error returns:
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  ENXIO		No such device:	phy dead or ctl_addr == 0
-	  EIO		I/O error:	reset timed out or hardware error
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - ENXIO	No such device:	phy dead or ctl_addr == 0
+	  - EIO		I/O error:	reset timed out or hardware error
 
 	notes:
 
-	  Execute a reset on the device as soon as the current IO
-	  operation has completed.
+	  - Execute a reset on the device as soon as the current IO
+	    operation has completed.
 
-	  Executes an ATAPI soft reset if applicable, otherwise
-	  executes an ATA soft reset on the controller.
+	  - Executes an ATAPI soft reset if applicable, otherwise
+	    executes an ATA soft reset on the controller.
 
 
 
-HDIO_DRIVE_TASKFILE		execute raw taskfile
+HDIO_DRIVE_TASKFILE
+	execute raw taskfile
 
-	Note:  If you don't have a copy of the ANSI ATA specification
-	handy, you should probably ignore this ioctl.
 
-	Execute an ATA disk command directly by writing the "taskfile"
-	registers of the drive.  Requires ADMIN and RAWIO access
-	privileges.
+	Note:
+		If you don't have a copy of the ANSI ATA specification
+		handy, you should probably ignore this ioctl.
 
-	usage:
+	- Execute an ATA disk command directly by writing the "taskfile"
+	  registers of the drive.  Requires ADMIN and RAWIO access
+	  privileges.
+
+	usage::
 
 	  struct {
+
 	    ide_task_request_t req_task;
 	    u8 outbuf[OUTPUT_SIZE];
 	    u8 inbuf[INPUT_SIZE];
@@ -548,6 +700,7 @@ HDIO_DRIVE_TASKFILE		execute raw taskfile
 
 	  (See below for details on memory area passed to ioctl.)
 
+	  ============	===================================================
 	  io_ports[8]	values to be written to taskfile registers
 	  hob_ports[8]	high-order bytes, for extended commands.
 	  out_flags	flags indicating which registers are valid
@@ -557,24 +710,29 @@ HDIO_DRIVE_TASKFILE		execute raw taskfile
 	  out_size	size of output buffer
 	  outbuf	buffer of data to be transmitted to disk
 	  inbuf		buffer of data to be received from disk (see [1])
+	  ============	===================================================
 
 	outputs:
 
+	  ===========	====================================================
 	  io_ports[]	values returned in the taskfile registers
 	  hob_ports[]	high-order bytes, for extended commands.
 	  out_flags	flags indicating which registers are valid (see [2])
 	  in_flags	flags indicating which registers should be returned
 	  outbuf	buffer of data to be transmitted to disk (see [1])
 	  inbuf		buffer of data to be received from disk
+	  ===========	====================================================
 
 	error returns:
-	  EACCES	CAP_SYS_ADMIN or CAP_SYS_RAWIO privilege not set.
-	  ENOMSG	Device is not a disk drive.
-	  ENOMEM	Unable to allocate memory for task
-	  EFAULT	req_cmd == TASKFILE_IN_OUT (not implemented as of 2.6.8)
-	  EPERM		req_cmd == TASKFILE_MULTI_OUT and drive
-	  		multi-count not yet set.
-	  EIO		Drive failed the command.
+	  - EACCES	CAP_SYS_ADMIN or CAP_SYS_RAWIO privilege not set.
+	  - ENOMSG	Device is not a disk drive.
+	  - ENOMEM	Unable to allocate memory for task
+	  - EFAULT	req_cmd == TASKFILE_IN_OUT (not implemented as of 2.6.8)
+	  - EPERM
+
+			req_cmd == TASKFILE_MULTI_OUT and drive
+			multi-count not yet set.
+	  - EIO		Drive failed the command.
 
 	notes:
 
@@ -615,22 +773,25 @@ HDIO_DRIVE_TASKFILE		execute raw taskfile
 	  Command is passed to the disk drive via the ide_task_request_t
 	  structure, which contains these fields:
 
+	    ============	===============================================
 	    io_ports[8]		values for the taskfile registers
 	    hob_ports[8]	high-order bytes, for extended commands
 	    out_flags		flags indicating which entries in the
-	    			io_ports[] and hob_ports[] arrays
+				io_ports[] and hob_ports[] arrays
 				contain valid values.  Type ide_reg_valid_t.
 	    in_flags		flags indicating which entries in the
-	    			io_ports[] and hob_ports[] arrays
+				io_ports[] and hob_ports[] arrays
 				are expected to contain valid values
 				on return.
 	    data_phase		See below
 	    req_cmd		Command type, see below
 	    out_size		output (user->drive) buffer size, bytes
 	    in_size		input (drive->user) buffer size, bytes
+	    ============	===============================================
 
 	  When out_flags is zero, the following registers are loaded.
 
+	    ============	===============================================
 	    HOB_FEATURE		If the drive supports LBA48
 	    HOB_NSECTOR		If the drive supports LBA48
 	    HOB_SECTOR		If the drive supports LBA48
@@ -644,9 +805,11 @@ HDIO_DRIVE_TASKFILE		execute raw taskfile
 	    SELECT		First, masked with 0xE0 if LBA48, 0xEF
 				otherwise; then, or'ed with the default
 				value of SELECT.
+	    ============	===============================================
 
 	  If any bit in out_flags is set, the following registers are loaded.
 
+	    ============	===============================================
 	    HOB_DATA		If out_flags.b.data is set.  HOB_DATA will
 				travel on DD8-DD15 on little endian machines
 				and on DD0-DD7 on big endian machines.
@@ -664,6 +827,7 @@ HDIO_DRIVE_TASKFILE		execute raw taskfile
 	    HCYL		If out_flags.b.hcyl is set
 	    SELECT		Or'ed with the default value of SELECT and
 				loaded regardless of out_flags.b.select.
+	    ============	===============================================
 
 	  Taskfile registers are read back from the drive into
 	  {io|hob}_ports[] after the command completes iff one of the
@@ -674,6 +838,7 @@ HDIO_DRIVE_TASKFILE		execute raw taskfile
 	    2. One or more than one bits are set in out_flags.
 	    3. The requested data_phase is TASKFILE_NO_DATA.
 
+	    ============	===============================================
 	    HOB_DATA		If in_flags.b.data is set.  It will contain
 				DD8-DD15 on little endian machines and
 				DD0-DD7 on big endian machines.
@@ -689,10 +854,12 @@ HDIO_DRIVE_TASKFILE		execute raw taskfile
 	    SECTOR
 	    LCYL
 	    HCYL
+	    ============	===============================================
 
 	  The data_phase field describes the data transfer to be
 	  performed.  Value is one of:
 
+	    ===================        ========================================
 	    TASKFILE_IN
 	    TASKFILE_MULTI_IN
 	    TASKFILE_OUT
@@ -708,15 +875,18 @@ HDIO_DRIVE_TASKFILE		execute raw taskfile
 	    TASKFILE_P_OUT		unimplemented
 	    TASKFILE_P_OUT_DMA		unimplemented
 	    TASKFILE_P_OUT_DMAQ		unimplemented
+	    ===================        ========================================
 
 	  The req_cmd field classifies the command type.  It may be
 	  one of:
 
+	    ========================    =======================================
 	    IDE_DRIVE_TASK_NO_DATA
 	    IDE_DRIVE_TASK_SET_XFER	unimplemented
 	    IDE_DRIVE_TASK_IN
 	    IDE_DRIVE_TASK_OUT		unimplemented
 	    IDE_DRIVE_TASK_RAW_WRITE
+	    ========================    =======================================
 
 	  [6] Do not access {in|out}_flags->all except for resetting
 	  all the bits.  Always access individual bit fields.  ->all
@@ -726,45 +896,57 @@ HDIO_DRIVE_TASKFILE		execute raw taskfile
 
 
 
-HDIO_DRIVE_CMD			execute a special drive command
+HDIO_DRIVE_CMD
+	execute a special drive command
+
 
 	Note:  If you don't have a copy of the ANSI ATA specification
 	handy, you should probably ignore this ioctl.
 
-	usage:
+	usage::
 
 	  u8 args[4+XFER_SIZE];
+
 	  ...
 	  ioctl(fd, HDIO_DRIVE_CMD, args);
 
 	inputs:
+	    Commands other than WIN_SMART:
 
-	  Commands other than WIN_SMART
+	    =======     =======
 	    args[0]	COMMAND
 	    args[1]	NSECTOR
 	    args[2]	FEATURE
 	    args[3]	NSECTOR
+	    =======     =======
 
-	  WIN_SMART
+	    WIN_SMART:
+
+	    =======     =======
 	    args[0]	COMMAND
 	    args[1]	SECTOR
 	    args[2]	FEATURE
 	    args[3]	NSECTOR
+	    =======     =======
 
 	outputs:
+		args[] buffer is filled with register values followed by any
+
 
-	  args[] buffer is filled with register values followed by any
 	  data returned by the disk.
+
+	    ========	====================================================
 	    args[0]	status
 	    args[1]	error
 	    args[2]	NSECTOR
 	    args[3]	undefined
 	    args[4+]	NSECTOR * 512 bytes of data returned by the command.
+	    ========	====================================================
 
 	error returns:
-	  EACCES	Access denied:  requires CAP_SYS_RAWIO
-	  ENOMEM	Unable to allocate memory for task
-	  EIO		Drive reports error
+	  - EACCES	Access denied:  requires CAP_SYS_RAWIO
+	  - ENOMEM	Unable to allocate memory for task
+	  - EIO		Drive reports error
 
 	notes:
 
@@ -789,20 +971,24 @@ HDIO_DRIVE_CMD			execute a special drive command
 
 
 
-HDIO_DRIVE_TASK			execute task and special drive command
+HDIO_DRIVE_TASK
+	execute task and special drive command
+
 
 	Note:  If you don't have a copy of the ANSI ATA specification
 	handy, you should probably ignore this ioctl.
 
-	usage:
+	usage::
 
 	  u8 args[7];
+
 	  ...
 	  ioctl(fd, HDIO_DRIVE_TASK, args);
 
 	inputs:
+	    Taskfile register values:
 
-	  Taskfile register values:
+	    =======	=======
 	    args[0]	COMMAND
 	    args[1]	FEATURE
 	    args[2]	NSECTOR
@@ -810,10 +996,13 @@ HDIO_DRIVE_TASK			execute task and special drive command
 	    args[4]	LCYL
 	    args[5]	HCYL
 	    args[6]	SELECT
+	    =======	=======
 
 	outputs:
+	    Taskfile register values:
 
-	  Taskfile register values:
+
+	    =======	=======
 	    args[0]	status
 	    args[1]	error
 	    args[2]	NSECTOR
@@ -821,12 +1010,13 @@ HDIO_DRIVE_TASK			execute task and special drive command
 	    args[4]	LCYL
 	    args[5]	HCYL
 	    args[6]	SELECT
+	    =======	=======
 
 	error returns:
-	  EACCES	Access denied:  requires CAP_SYS_RAWIO
-	  ENOMEM	Unable to allocate memory for task
-	  ENOMSG	Device is not a disk drive.
-	  EIO		Drive failed the command.
+	  - EACCES	Access denied:  requires CAP_SYS_RAWIO
+	  - ENOMEM	Unable to allocate memory for task
+	  - ENOMSG	Device is not a disk drive.
+	  - EIO		Drive failed the command.
 
 	notes:
 
@@ -836,236 +1026,317 @@ HDIO_DRIVE_TASK			execute task and special drive command
 
 
 
-HDIO_DRIVE_CMD_AEB		HDIO_DRIVE_TASK
+HDIO_DRIVE_CMD_AEB
+	HDIO_DRIVE_TASK
+
 
 	Not implemented, as of 2.6.8.1
 
 
 
-HDIO_SET_32BIT			change io_32bit flags
+HDIO_SET_32BIT
+	change io_32bit flags
 
-	usage:
+
+	usage::
 
 	  int val;
+
 	  ioctl(fd, HDIO_SET_32BIT, val);
 
 	inputs:
-	  New value for io_32bit flag
+		New value for io_32bit flag
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 3]
-	  EBUSY		Controller busy
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 3]
+	  - EBUSY	Controller busy
 
 
 
 
-HDIO_SET_NOWERR			change ignore-write-error flag
+HDIO_SET_NOWERR
+	change ignore-write-error flag
 
-	usage:
+
+	usage::
 
 	  int val;
+
 	  ioctl(fd, HDIO_SET_NOWERR, val);
 
 	inputs:
-	  New value for ignore-write-error flag.  Used for ignoring
+		New value for ignore-write-error flag.  Used for ignoring
+
+
 	  WRERR_STAT
 
-	outputs:	none
+	outputs:
+		none
+
+
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 1]
-	  EBUSY		Controller busy
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 1]
+	  - EBUSY		Controller busy
 
 
 
-HDIO_SET_DMA			change use-dma flag
+HDIO_SET_DMA
+	change use-dma flag
 
-	usage:
+
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_SET_DMA, val);
 
 	inputs:
-	  New value for use-dma flag
+		New value for use-dma flag
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 1]
-	  EBUSY		Controller busy
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 1]
+	  - EBUSY	Controller busy
 
 
 
-HDIO_SET_PIO_MODE		reconfig interface to new speed
+HDIO_SET_PIO_MODE
+	reconfig interface to new speed
 
-	usage:
+
+	usage::
 
 	  long val;
+
 	  ioctl(fd, HDIO_SET_PIO_MODE, val);
 
 	inputs:
-	  New interface speed.
+		New interface speed.
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 255]
-	  EBUSY		Controller busy
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 255]
+	  - EBUSY	Controller busy
 
 
 
-HDIO_SCAN_HWIF			register and (re)scan interface
+HDIO_SCAN_HWIF
+	register and (re)scan interface
 
-	usage:
+
+	usage::
 
 	  int args[3]
+
 	  ...
 	  ioctl(fd, HDIO_SCAN_HWIF, args);
 
 	inputs:
+
+	  =======	=========================
 	  args[0]	io address to probe
+
+
 	  args[1]	control address to probe
 	  args[2]	irq number
+	  =======	=========================
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error returns:
-	  EACCES	Access denied:  requires CAP_SYS_RAWIO
-	  EIO		Probe failed.
+	  - EACCES	Access denied:  requires CAP_SYS_RAWIO
+	  - EIO		Probe failed.
 
 	notes:
+		This ioctl initializes the addresses and irq for a disk
+		controller, probes for drives, and creates /proc/ide
+		interfaces as appropriate.
 
-	  This ioctl initializes the addresses and irq for a disk
-	  controller, probes for drives, and creates /proc/ide
-	  interfaces as appropriate.
 
 
+HDIO_UNREGISTER_HWIF
+	unregister interface
 
-HDIO_UNREGISTER_HWIF		unregister interface
 
-	usage:
+	usage::
 
 	  int index;
+
 	  ioctl(fd, HDIO_UNREGISTER_HWIF, index);
 
 	inputs:
-	  index		index of hardware interface to unregister
+		index		index of hardware interface to unregister
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error returns:
-	  EACCES	Access denied:  requires CAP_SYS_RAWIO
+	  - EACCES	Access denied:  requires CAP_SYS_RAWIO
 
 	notes:
+		This ioctl removes a hardware interface from the kernel.
 
-	  This ioctl removes a hardware interface from the kernel.
+		Currently (2.6.8) this ioctl silently fails if any drive on
+		the interface is busy.
 
-	  Currently (2.6.8) this ioctl silently fails if any drive on
-	  the interface is busy.
 
 
+HDIO_SET_WCACHE
+	change write cache enable-disable
 
-HDIO_SET_WCACHE			change write cache enable-disable
 
-	usage:
+	usage::
 
 	  int val;
+
 	  ioctl(fd, HDIO_SET_WCACHE, val);
 
 	inputs:
-	  New value for write cache enable
+		New value for write cache enable
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 1]
-	  EBUSY		Controller busy
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 1]
+	  - EBUSY	Controller busy
 
 
 
-HDIO_SET_ACOUSTIC		change acoustic behavior
+HDIO_SET_ACOUSTIC
+	change acoustic behavior
 
-	usage:
+
+	usage::
 
 	  int val;
+
 	  ioctl(fd, HDIO_SET_ACOUSTIC, val);
 
 	inputs:
-	  New value for drive acoustic settings
+		New value for drive acoustic settings
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 254]
-	  EBUSY		Controller busy
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 254]
+	  - EBUSY	Controller busy
 
 
 
-HDIO_SET_QDMA			change use-qdma flag
+HDIO_SET_QDMA
+	change use-qdma flag
+
 
 	Not implemented, as of 2.6.8.1
 
 
 
-HDIO_SET_ADDRESS		change lba addressing modes
+HDIO_SET_ADDRESS
+	change lba addressing modes
 
-	usage:
+
+	usage::
 
 	  int val;
+
 	  ioctl(fd, HDIO_SET_ADDRESS, val);
 
 	inputs:
-	  New value for addressing mode
-	    0 = 28-bit
-	    1 = 48-bit
-	    2 = 48-bit doing 28-bit
+		New value for addressing mode
+
+	    =   ===================
+	    0   28-bit
+	    1   48-bit
+	    2   48-bit doing 28-bit
+	    =   ===================
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 2]
-	  EBUSY		Controller busy
-	  EIO		Drive does not support lba48 mode.
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 2]
+	  - EBUSY		Controller busy
+	  - EIO		Drive does not support lba48 mode.
 
 
 HDIO_SET_IDE_SCSI
+	usage::
 
-	usage:
 
 	  long val;
+
 	  ioctl(fd, HDIO_SET_IDE_SCSI, val);
 
 	inputs:
-	  New value for scsi emulation mode (?)
+		New value for scsi emulation mode (?)
+
+
+
+	outputs:
+		none
+
 
-	outputs:	none
 
 	error return:
-	  EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
-	  EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  EINVAL	value out of range [0 1]
-	  EBUSY		Controller busy
+	  - EINVAL	(bdev != bdev->bd_contains) (not sure what this means)
+	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  - EINVAL	value out of range [0 1]
+	  - EBUSY	Controller busy
 
 
 
 HDIO_SET_SCSI_IDE
-
 	Not implemented, as of 2.6.8.1
-
-
diff --git a/Documentation/ioctl/index.rst b/Documentation/ioctl/index.rst
new file mode 100644
index 000000000000..1a6f437566e3
--- /dev/null
+++ b/Documentation/ioctl/index.rst
@@ -0,0 +1,16 @@
+:orphan:
+
+======
+IOCTLs
+======
+
+.. toctree::
+   :maxdepth: 1
+
+   ioctl-number
+
+   botching-up-ioctls
+   ioctl-decoding
+
+   cdrom
+   hdio
diff --git a/Documentation/ioctl/ioctl-decoding.txt b/Documentation/ioctl/ioctl-decoding.rst
similarity index 54%
rename from Documentation/ioctl/ioctl-decoding.txt
rename to Documentation/ioctl/ioctl-decoding.rst
index e35efb0cec2e..380d6bb3e3ea 100644
--- a/Documentation/ioctl/ioctl-decoding.txt
+++ b/Documentation/ioctl/ioctl-decoding.rst
@@ -1,10 +1,16 @@
+==============================
+Decoding an IOCTL Magic Number
+==============================
+
 To decode a hex IOCTL code:
 
 Most architectures use this generic format, but check
 include/ARCH/ioctl.h for specifics, e.g. powerpc
 uses 3 bits to encode read/write and 13 bits for size.
 
- bits    meaning
+ ====== ==================================
+ bits   meaning
+ ====== ==================================
  31-30	00 - no parameters: uses _IO macro
 	10 - read: _IOR
 	01 - write: _IOW
@@ -16,9 +22,10 @@ uses 3 bits to encode read/write and 13 bits for size.
 	unique to each driver
 
  7-0	function #
+ ====== ==================================
 
 
 So for example 0x82187201 is a read with arg length of 0x218,
-character 'r' function 1. Grepping the source reveals this is:
+character 'r' function 1. Grepping the source reveals this is::
 
-#define VFAT_IOCTL_READDIR_BOTH         _IOR('r', 1, struct dirent [2])
+	#define VFAT_IOCTL_READDIR_BOTH         _IOR('r', 1, struct dirent [2])
diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c
index ce8a70875bd5..ae44a1a31d9f 100644
--- a/drivers/gpu/drm/drm_ioctl.c
+++ b/drivers/gpu/drm/drm_ioctl.c
@@ -720,7 +720,7 @@ static const struct drm_ioctl_desc drm_ioctls[] = {
  *     };
  *
  * Please make sure that you follow all the best practices from
- * ``Documentation/ioctl/botching-up-ioctls.txt``. Note that drm_ioctl()
+ * ``Documentation/ioctl/botching-up-ioctls.rst``. Note that drm_ioctl()
  * automatically zero-extends structures, hence make sure you can add more stuff
  * at the end, i.e. don't put a variable sized array there.
  *
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 66/79] docs: namespaces: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (61 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 65/79] docs: ioctl: convert to ReST Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 67/79] docs: nfc: " Mauro Carvalho Chehab
                     ` (14 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet

Rename the namespaces documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

There are two upper case file names. Rename them to
lower case, as we're working to avoid upper case file
names at Documentation.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 ...{compatibility-list.txt => compatibility-list.rst} |  9 +++++++--
 Documentation/namespaces/index.rst                    | 11 +++++++++++
 .../{resource-control.txt => resource-control.rst}    |  4 ++++
 3 files changed, 22 insertions(+), 2 deletions(-)
 rename Documentation/namespaces/{compatibility-list.txt => compatibility-list.rst} (86%)
 create mode 100644 Documentation/namespaces/index.rst
 rename Documentation/namespaces/{resource-control.txt => resource-control.rst} (89%)

diff --git a/Documentation/namespaces/compatibility-list.txt b/Documentation/namespaces/compatibility-list.rst
similarity index 86%
rename from Documentation/namespaces/compatibility-list.txt
rename to Documentation/namespaces/compatibility-list.rst
index defc5589bfcd..3af5b05156e7 100644
--- a/Documentation/namespaces/compatibility-list.txt
+++ b/Documentation/namespaces/compatibility-list.rst
@@ -1,4 +1,6 @@
-	Namespaces compatibility list
+=============================
+Namespaces compatibility list
+=============================
 
 This document contains the information about the problems user
 may have when creating tasks living in different namespaces.
@@ -7,13 +9,16 @@ Here's the summary. This matrix shows the known problems, that
 occur when tasks share some namespace (the columns) while living
 in different other namespaces (the rows):
 
-	UTS	IPC	VFS	PID	User	Net
+====	===	===	===	===	====	===
+-	UTS	IPC	VFS	PID	User	Net
+====	===	===	===	===	====	===
 UTS	 X
 IPC		 X	 1
 VFS			 X
 PID		 1	 1	 X
 User		 2	 2		 X
 Net						 X
+====	===	===	===	===	====	===
 
 1. Both the IPC and the PID namespaces provide IDs to address
    object inside the kernel. E.g. semaphore with IPCID or
diff --git a/Documentation/namespaces/index.rst b/Documentation/namespaces/index.rst
new file mode 100644
index 000000000000..bf40625dd11a
--- /dev/null
+++ b/Documentation/namespaces/index.rst
@@ -0,0 +1,11 @@
+:orphan:
+
+==========
+Namespaces
+==========
+
+.. toctree::
+   :maxdepth: 1
+
+   compatibility-list
+   resource-control
diff --git a/Documentation/namespaces/resource-control.txt b/Documentation/namespaces/resource-control.rst
similarity index 89%
rename from Documentation/namespaces/resource-control.txt
rename to Documentation/namespaces/resource-control.rst
index abc13c394738..369556e00f0c 100644
--- a/Documentation/namespaces/resource-control.txt
+++ b/Documentation/namespaces/resource-control.rst
@@ -1,3 +1,7 @@
+===========================
+Namespaces research control
+===========================
+
 There are a lot of kinds of objects in the kernel that don't have
 individual limits or that have limits that are ineffective when a set
 of processes is allowed to switch user ids.  With user namespaces
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 67/79] docs: nfc: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (62 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 66/79] docs: namespaces: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 68/79] docs: md: " Mauro Carvalho Chehab
                     ` (13 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet

Rename the nfc documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/nfc/index.rst                   |  11 ++
 .../nfc/{nfc-hci.txt => nfc-hci.rst}          | 163 ++++++++++--------
 .../nfc/{nfc-pn544.txt => nfc-pn544.rst}      |   6 +-
 3 files changed, 107 insertions(+), 73 deletions(-)
 create mode 100644 Documentation/nfc/index.rst
 rename Documentation/nfc/{nfc-hci.txt => nfc-hci.rst} (71%)
 rename Documentation/nfc/{nfc-pn544.txt => nfc-pn544.rst} (82%)

diff --git a/Documentation/nfc/index.rst b/Documentation/nfc/index.rst
new file mode 100644
index 000000000000..4f4947fce80d
--- /dev/null
+++ b/Documentation/nfc/index.rst
@@ -0,0 +1,11 @@
+:orphan:
+
+========================
+Near Field Communication
+========================
+
+.. toctree::
+   :maxdepth: 1
+
+   nfc-hci
+   nfc-pn544
diff --git a/Documentation/nfc/nfc-hci.txt b/Documentation/nfc/nfc-hci.rst
similarity index 71%
rename from Documentation/nfc/nfc-hci.txt
rename to Documentation/nfc/nfc-hci.rst
index 0dc078cab972..eb8a1a14e919 100644
--- a/Documentation/nfc/nfc-hci.txt
+++ b/Documentation/nfc/nfc-hci.rst
@@ -1,7 +1,9 @@
+========================
 HCI backend for NFC Core
+========================
 
-Author: Eric Lapuyade, Samuel Ortiz
-Contact: eric.lapuyade@intel.com, samuel.ortiz@intel.com
+- Author: Eric Lapuyade, Samuel Ortiz
+- Contact: eric.lapuyade@intel.com, samuel.ortiz@intel.com
 
 General
 -------
@@ -24,12 +26,13 @@ HCI events can also be received from the host controller. They will be handled
 and a translation will be forwarded to NFC Core as needed. There are hooks to
 let the HCI driver handle proprietary events or override standard behavior.
 HCI uses 2 execution contexts:
+
 - one for executing commands : nfc_hci_msg_tx_work(). Only one command
-can be executing at any given moment.
+  can be executing at any given moment.
 - one for dispatching received events and commands : nfc_hci_msg_rx_work().
 
-HCI Session initialization:
----------------------------
+HCI Session initialization
+--------------------------
 
 The Session initialization is an HCI standard which must unfortunately
 support proprietary gates. This is the reason why the driver will pass a list
@@ -58,9 +61,9 @@ HCI Management
 --------------
 
 A driver would normally register itself with HCI and provide the following
-entry points:
+entry points::
 
-struct nfc_hci_ops {
+  struct nfc_hci_ops {
 	int (*open)(struct nfc_hci_dev *hdev);
 	void (*close)(struct nfc_hci_dev *hdev);
 	int (*hci_ready) (struct nfc_hci_dev *hdev);
@@ -82,38 +85,38 @@ struct nfc_hci_ops {
 			      struct nfc_target *target);
 	int (*event_received)(struct nfc_hci_dev *hdev, u8 gate, u8 event,
 			      struct sk_buff *skb);
-};
+  };
 
 - open() and close() shall turn the hardware on and off.
 - hci_ready() is an optional entry point that is called right after the hci
-session has been set up. The driver can use it to do additional initialization
-that must be performed using HCI commands.
+  session has been set up. The driver can use it to do additional initialization
+  that must be performed using HCI commands.
 - xmit() shall simply write a frame to the physical link.
 - start_poll() is an optional entrypoint that shall set the hardware in polling
-mode. This must be implemented only if the hardware uses proprietary gates or a
-mechanism slightly different from the HCI standard.
+  mode. This must be implemented only if the hardware uses proprietary gates or a
+  mechanism slightly different from the HCI standard.
 - dep_link_up() is called after a p2p target has been detected, to finish
-the p2p connection setup with hardware parameters that need to be passed back
-to nfc core.
+  the p2p connection setup with hardware parameters that need to be passed back
+  to nfc core.
 - dep_link_down() is called to bring the p2p link down.
 - target_from_gate() is an optional entrypoint to return the nfc protocols
-corresponding to a proprietary gate.
+  corresponding to a proprietary gate.
 - complete_target_discovered() is an optional entry point to let the driver
-perform additional proprietary processing necessary to auto activate the
-discovered target.
+  perform additional proprietary processing necessary to auto activate the
+  discovered target.
 - im_transceive() must be implemented by the driver if proprietary HCI commands
-are required to send data to the tag. Some tag types will require custom
-commands, others can be written to using the standard HCI commands. The driver
-can check the tag type and either do proprietary processing, or return 1 to ask
-for standard processing. The data exchange command itself must be sent
-asynchronously.
+  are required to send data to the tag. Some tag types will require custom
+  commands, others can be written to using the standard HCI commands. The driver
+  can check the tag type and either do proprietary processing, or return 1 to ask
+  for standard processing. The data exchange command itself must be sent
+  asynchronously.
 - tm_send() is called to send data in the case of a p2p connection
 - check_presence() is an optional entry point that will be called regularly
-by the core to check that an activated tag is still in the field. If this is
-not implemented, the core will not be able to push tag_lost events to the user
-space
+  by the core to check that an activated tag is still in the field. If this is
+  not implemented, the core will not be able to push tag_lost events to the user
+  space
 - event_received() is called to handle an event coming from the chip. Driver
-can handle the event or return 1 to let HCI attempt standard processing.
+  can handle the event or return 1 to let HCI attempt standard processing.
 
 On the rx path, the driver is responsible to push incoming HCP frames to HCI
 using nfc_hci_recv_frame(). HCI will take care of re-aggregation and handling
@@ -122,20 +125,23 @@ This must be done from a context that can sleep.
 PHY Management
 --------------
 
-The physical link (i2c, ...) management is defined by the following structure:
+The physical link (i2c, ...) management is defined by the following structure::
 
-struct nfc_phy_ops {
+  struct nfc_phy_ops {
 	int (*write)(void *dev_id, struct sk_buff *skb);
 	int (*enable)(void *dev_id);
 	void (*disable)(void *dev_id);
-};
+  };
 
-enable(): turn the phy on (power on), make it ready to transfer data
-disable(): turn the phy off
-write(): Send a data frame to the chip. Note that to enable higher
-layers such as an llc to store the frame for re-emission, this function must
-not alter the skb. It must also not return a positive result (return 0 for
-success, negative for failure).
+enable():
+	turn the phy on (power on), make it ready to transfer data
+disable():
+	turn the phy off
+write():
+	Send a data frame to the chip. Note that to enable higher
+	layers such as an llc to store the frame for re-emission, this
+	function must not alter the skb. It must also not return a positive
+	result (return 0 for success, negative for failure).
 
 Data coming from the chip shall be sent directly to nfc_hci_recv_frame().
 
@@ -145,9 +151,9 @@ LLC
 Communication between the CPU and the chip often requires some link layer
 protocol. Those are isolated as modules managed by the HCI layer. There are
 currently two modules : nop (raw transfert) and shdlc.
-A new llc must implement the following functions:
+A new llc must implement the following functions::
 
-struct nfc_llc_ops {
+  struct nfc_llc_ops {
 	void *(*init) (struct nfc_hci_dev *hdev, xmit_to_drv_t xmit_to_drv,
 		       rcv_to_hci_t rcv_to_hci, int tx_headroom,
 		       int tx_tailroom, int *rx_headroom, int *rx_tailroom,
@@ -157,17 +163,25 @@ struct nfc_llc_ops {
 	int (*stop) (struct nfc_llc *llc);
 	void (*rcv_from_drv) (struct nfc_llc *llc, struct sk_buff *skb);
 	int (*xmit_from_hci) (struct nfc_llc *llc, struct sk_buff *skb);
-};
+  };
 
-- init() : allocate and init your private storage
-- deinit() : cleanup
-- start() : establish the logical connection
-- stop () : terminate the logical connection
-- rcv_from_drv() : handle data coming from the chip, going to HCI
-- xmit_from_hci() : handle data sent by HCI, going to the chip
+init():
+	allocate and init your private storage
+deinit():
+	cleanup
+start():
+	establish the logical connection
+stop ():
+	terminate the logical connection
+rcv_from_drv():
+	handle data coming from the chip, going to HCI
+xmit_from_hci():
+	handle data sent by HCI, going to the chip
 
 The llc must be registered with nfc before it can be used. Do that by
-calling nfc_llc_register(const char *name, struct nfc_llc_ops *ops);
+calling::
+
+	nfc_llc_register(const char *name, struct nfc_llc_ops *ops);
 
 Again, note that the llc does not handle the physical link. It is thus very
 easy to mix any physical link with any llc for a given chip driver.
@@ -187,26 +201,32 @@ fast, cannot sleep. sends incoming frames to HCI where they are passed to
 the current llc. In case of shdlc, the frame is queued in shdlc rx queue.
 
 - SHDLC State Machine worker (SMW)
-Only when llc_shdlc is used: handles shdlc rx & tx queues.
-Dispatches HCI cmd responses.
+
+  Only when llc_shdlc is used: handles shdlc rx & tx queues.
+
+  Dispatches HCI cmd responses.
 
 - HCI Tx Cmd worker (MSGTXWQ)
-Serializes execution of HCI commands. Completes execution in case of response
-timeout.
+
+  Serializes execution of HCI commands.
+
+  Completes execution in case of response timeout.
 
 - HCI Rx worker (MSGRXWQ)
-Dispatches incoming HCI commands or events.
+
+  Dispatches incoming HCI commands or events.
 
 - Syscall context from a userspace call (SYSCALL)
-Any entrypoint in HCI called from NFC Core
+
+  Any entrypoint in HCI called from NFC Core
 
 Workflow executing an HCI command (using shdlc)
 -----------------------------------------------
 
 Executing an HCI command can easily be performed synchronously using the
-following API:
+following API::
 
-int nfc_hci_send_cmd (struct nfc_hci_dev *hdev, u8 gate, u8 cmd,
+  int nfc_hci_send_cmd (struct nfc_hci_dev *hdev, u8 gate, u8 cmd,
 			const u8 *param, size_t param_len, struct sk_buff **skb)
 
 The API must be invoked from a context that can sleep. Most of the time, this
@@ -234,11 +254,11 @@ waiting command execution. Response processing involves invoking the completion
 callback that was provided by nfc_hci_msg_tx_work() when it sent the command.
 The completion callback will then wake the syscall context.
 
-It is also possible to execute the command asynchronously using this API:
+It is also possible to execute the command asynchronously using this API::
 
-static int nfc_hci_execute_cmd_async(struct nfc_hci_dev *hdev, u8 pipe, u8 cmd,
-			       const u8 *param, size_t param_len,
-			       data_exchange_cb_t cb, void *cb_context)
+  static int nfc_hci_execute_cmd_async(struct nfc_hci_dev *hdev, u8 pipe, u8 cmd,
+				       const u8 *param, size_t param_len,
+				       data_exchange_cb_t cb, void *cb_context)
 
 The workflow is the same, except that the API call returns immediately, and
 the callback will be called with the result from the SMW context.
@@ -268,23 +288,24 @@ went wrong below and know that expected events will probably never happen.
 Handling of these errors is done as follows:
 
 - driver (pn544) fails to deliver an incoming frame: it stores the error such
-that any subsequent call to the driver will result in this error. Then it calls
-the standard nfc_shdlc_recv_frame() with a NULL argument to report the problem
-above. shdlc stores a EREMOTEIO sticky status, which will trigger SMW to
-report above in turn.
+  that any subsequent call to the driver will result in this error. Then it
+  calls the standard nfc_shdlc_recv_frame() with a NULL argument to report the
+  problem above. shdlc stores a EREMOTEIO sticky status, which will trigger
+  SMW to report above in turn.
 
 - SMW is basically a background thread to handle incoming and outgoing shdlc
-frames. This thread will also check the shdlc sticky status and report to HCI
-when it discovers it is not able to run anymore because of an unrecoverable
-error that happened within shdlc or below. If the problem occurs during shdlc
-connection, the error is reported through the connect completion.
+  frames. This thread will also check the shdlc sticky status and report to HCI
+  when it discovers it is not able to run anymore because of an unrecoverable
+  error that happened within shdlc or below. If the problem occurs during shdlc
+  connection, the error is reported through the connect completion.
 
 - HCI: if an internal HCI error happens (frame is lost), or HCI is reported an
-error from a lower layer, HCI will either complete the currently executing
-command with that error, or notify NFC Core directly if no command is executing.
+  error from a lower layer, HCI will either complete the currently executing
+  command with that error, or notify NFC Core directly if no command is
+  executing.
 
 - NFC Core: when NFC Core is notified of an error from below and polling is
-active, it will send a tag discovered event with an empty tag list to the user
-space to let it know that the poll operation will never be able to detect a tag.
-If polling is not active and the error was sticky, lower levels will return it
-at next invocation.
+  active, it will send a tag discovered event with an empty tag list to the user
+  space to let it know that the poll operation will never be able to detect a
+  tag. If polling is not active and the error was sticky, lower levels will
+  return it at next invocation.
diff --git a/Documentation/nfc/nfc-pn544.txt b/Documentation/nfc/nfc-pn544.rst
similarity index 82%
rename from Documentation/nfc/nfc-pn544.txt
rename to Documentation/nfc/nfc-pn544.rst
index b36ca14ca2d6..6b2d8aae0c4e 100644
--- a/Documentation/nfc/nfc-pn544.txt
+++ b/Documentation/nfc/nfc-pn544.rst
@@ -1,5 +1,7 @@
-Kernel driver for the NXP Semiconductors PN544 Near Field
-Communication chip
+============================================================================
+Kernel driver for the NXP Semiconductors PN544 Near Field Communication chip
+============================================================================
+
 
 General
 -------
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 68/79] docs: md: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (63 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 67/79] docs: nfc: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 69/79] docs: mtd: " Mauro Carvalho Chehab
                     ` (12 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet

Rename the md documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/md/index.rst                    |  12 ++
 .../md/{md-cluster.txt => md-cluster.rst}     | 188 ++++++++++++------
 .../md/{raid5-cache.txt => raid5-cache.rst}   |  28 +--
 .../md/{raid5-ppl.txt => raid5-ppl.rst}       |   2 +
 4 files changed, 153 insertions(+), 77 deletions(-)
 create mode 100644 Documentation/md/index.rst
 rename Documentation/md/{md-cluster.txt => md-cluster.rst} (68%)
 rename Documentation/md/{raid5-cache.txt => raid5-cache.rst} (92%)
 rename Documentation/md/{raid5-ppl.txt => raid5-ppl.rst} (98%)

diff --git a/Documentation/md/index.rst b/Documentation/md/index.rst
new file mode 100644
index 000000000000..c4db34ed327d
--- /dev/null
+++ b/Documentation/md/index.rst
@@ -0,0 +1,12 @@
+:orphan:
+
+====
+RAID
+====
+
+.. toctree::
+   :maxdepth: 1
+
+   md-cluster
+   raid5-cache
+   raid5-ppl
diff --git a/Documentation/md/md-cluster.txt b/Documentation/md/md-cluster.rst
similarity index 68%
rename from Documentation/md/md-cluster.txt
rename to Documentation/md/md-cluster.rst
index e1055f105cf5..96eb52cec7eb 100644
--- a/Documentation/md/md-cluster.txt
+++ b/Documentation/md/md-cluster.rst
@@ -1,19 +1,24 @@
+==========
+MD Cluster
+==========
+
 The cluster MD is a shared-device RAID for a cluster, it supports
 two levels: raid1 and raid10 (limited support).
 
 
 1. On-disk format
+=================
 
 Separate write-intent-bitmaps are used for each cluster node.
 The bitmaps record all writes that may have been started on that node,
-and may not yet have finished. The on-disk layout is:
+and may not yet have finished. The on-disk layout is::
 
-0                    4k                     8k                    12k
--------------------------------------------------------------------
-| idle                | md super            | bm super [0] + bits |
-| bm bits[0, contd]   | bm super[1] + bits  | bm bits[1, contd]   |
-| bm super[2] + bits  | bm bits [2, contd]  | bm super[3] + bits  |
-| bm bits [3, contd]  |                     |                     |
+  0                    4k                     8k                    12k
+  -------------------------------------------------------------------
+  | idle                | md super            | bm super [0] + bits |
+  | bm bits[0, contd]   | bm super[1] + bits  | bm bits[1, contd]   |
+  | bm super[2] + bits  | bm bits [2, contd]  | bm super[3] + bits  |
+  | bm bits [3, contd]  |                     |                     |
 
 During "normal" functioning we assume the filesystem ensures that only
 one node writes to any given block at a time, so a write request will
@@ -28,10 +33,12 @@ node) is writing.
 
 
 2. DLM Locks for management
+===========================
 
 There are three groups of locks for managing the device:
 
 2.1 Bitmap lock resource (bm_lockres)
+-------------------------------------
 
  The bm_lockres protects individual node bitmaps. They are named in
  the form bitmap000 for node 1, bitmap001 for node 2 and so on. When a
@@ -48,6 +55,7 @@ There are three groups of locks for managing the device:
  joins the cluster.
 
 2.2 Message passing locks
+-------------------------
 
  Each node has to communicate with other nodes when starting or ending
  resync, and for metadata superblock updates.  This communication is
@@ -55,116 +63,155 @@ There are three groups of locks for managing the device:
  with the Lock Value Block (LVB) of one of the "message" lock.
 
 2.3 new-device management
+-------------------------
 
  A single lock: "no-new-dev" is used to co-ordinate the addition of
  new devices - this must be synchronized across the array.
  Normally all nodes hold a concurrent-read lock on this device.
 
 3. Communication
+================
 
  Messages can be broadcast to all nodes, and the sender waits for all
  other nodes to acknowledge the message before proceeding.  Only one
  message can be processed at a time.
 
 3.1 Message Types
+-----------------
 
  There are six types of messages which are passed:
 
- 3.1.1 METADATA_UPDATED: informs other nodes that the metadata has
+3.1.1 METADATA_UPDATED
+^^^^^^^^^^^^^^^^^^^^^^
+
+   informs other nodes that the metadata has
    been updated, and the node must re-read the md superblock. This is
    performed synchronously. It is primarily used to signal device
    failure.
 
- 3.1.2 RESYNCING: informs other nodes that a resync is initiated or
+3.1.2 RESYNCING
+^^^^^^^^^^^^^^^
+   informs other nodes that a resync is initiated or
    ended so that each node may suspend or resume the region.  Each
    RESYNCING message identifies a range of the devices that the
    sending node is about to resync. This overrides any previous
    notification from that node: only one ranged can be resynced at a
    time per-node.
 
- 3.1.3 NEWDISK: informs other nodes that a device is being added to
+3.1.3 NEWDISK
+^^^^^^^^^^^^^
+
+   informs other nodes that a device is being added to
    the array. Message contains an identifier for that device.  See
    below for further details.
 
- 3.1.4 REMOVE: A failed or spare device is being removed from the
+3.1.4 REMOVE
+^^^^^^^^^^^^
+
+   A failed or spare device is being removed from the
    array. The slot-number of the device is included in the message.
 
- 3.1.5 RE_ADD: A failed device is being re-activated - the assumption
+ 3.1.5 RE_ADD:
+
+   A failed device is being re-activated - the assumption
    is that it has been determined to be working again.
 
- 3.1.6 BITMAP_NEEDS_SYNC: if a node is stopped locally but the bitmap
+ 3.1.6 BITMAP_NEEDS_SYNC:
+
+   If a node is stopped locally but the bitmap
    isn't clean, then another node is informed to take the ownership of
    resync.
 
 3.2 Communication mechanism
+---------------------------
 
  The DLM LVB is used to communicate within nodes of the cluster. There
  are three resources used for the purpose:
 
-  3.2.1 token: The resource which protects the entire communication
+3.2.1 token
+^^^^^^^^^^^
+   The resource which protects the entire communication
    system. The node having the token resource is allowed to
    communicate.
 
-  3.2.2 message: The lock resource which carries the data to
-   communicate.
+3.2.2 message
+^^^^^^^^^^^^^
+   The lock resource which carries the data to communicate.
 
-  3.2.3 ack: The resource, acquiring which means the message has been
+3.2.3 ack
+^^^^^^^^^
+
+   The resource, acquiring which means the message has been
    acknowledged by all nodes in the cluster. The BAST of the resource
    is used to inform the receiving node that a node wants to
    communicate.
 
 The algorithm is:
 
- 1. receive status - all nodes have concurrent-reader lock on "ack".
+ 1. receive status - all nodes have concurrent-reader lock on "ack"::
 
-   sender                         receiver                 receiver
-   "ack":CR                       "ack":CR                 "ack":CR
+	sender                         receiver                 receiver
+	"ack":CR                       "ack":CR                 "ack":CR
 
- 2. sender get EX on "token"
-    sender get EX on "message"
-    sender                        receiver                 receiver
-    "token":EX                    "ack":CR                 "ack":CR
-    "message":EX
-    "ack":CR
+ 2. sender get EX on "token",
+    sender get EX on "message"::
+
+	sender                        receiver                 receiver
+	"token":EX                    "ack":CR                 "ack":CR
+	"message":EX
+	"ack":CR
 
     Sender checks that it still needs to send a message. Messages
     received or other events that happened while waiting for the
     "token" may have made this message inappropriate or redundant.
 
- 3. sender writes LVB.
+ 3. sender writes LVB
+
     sender down-convert "message" from EX to CW
+
     sender try to get EX of "ack"
-    [ wait until all receivers have *processed* the "message" ]
-
-                                     [ triggered by bast of "ack" ]
-                                     receiver get CR on "message"
-                                     receiver read LVB
-                                     receiver processes the message
-                                     [ wait finish ]
-                                     receiver releases "ack"
-                                     receiver tries to get PR on "message"
-
-   sender                         receiver                  receiver
-   "token":EX                     "message":CR              "message":CR
-   "message":CW
-   "ack":EX
+
+    ::
+
+      [ wait until all receivers have *processed* the "message" ]
+
+                                       [ triggered by bast of "ack" ]
+                                       receiver get CR on "message"
+                                       receiver read LVB
+                                       receiver processes the message
+                                       [ wait finish ]
+                                       receiver releases "ack"
+                                       receiver tries to get PR on "message"
+
+     sender                         receiver                  receiver
+     "token":EX                     "message":CR              "message":CR
+     "message":CW
+     "ack":EX
 
  4. triggered by grant of EX on "ack" (indicating all receivers
     have processed message)
+
     sender down-converts "ack" from EX to CR
+
     sender releases "message"
+
     sender releases "token"
-                               receiver upconvert to PR on "message"
-                               receiver get CR of "ack"
-                               receiver release "message"
 
-   sender                      receiver                   receiver
-   "ack":CR                    "ack":CR                   "ack":CR
+    ::
+
+                                 receiver upconvert to PR on "message"
+                                 receiver get CR of "ack"
+                                 receiver release "message"
+
+     sender                      receiver                   receiver
+     "ack":CR                    "ack":CR                   "ack":CR
 
 
 4. Handling Failures
+====================
 
 4.1 Node Failure
+----------------
 
  When a node fails, the DLM informs the cluster with the slot
  number. The node starts a cluster recovery thread. The cluster
@@ -177,11 +224,11 @@ The algorithm is:
 	- cleans the bitmap of the failed node
 	- releases bitmap<number> lock of the failed node
 	- initiates resync of the bitmap on the current node
-		md_check_recovery is invoked within recover_bitmaps,
-		then md_check_recovery -> metadata_update_start/finish,
-		it will lock the communication by lock_comm.
-		Which means when one node is resyncing it blocks all
-		other nodes from writing anywhere on the array.
+	  md_check_recovery is invoked within recover_bitmaps,
+	  then md_check_recovery -> metadata_update_start/finish,
+	  it will lock the communication by lock_comm.
+	  Which means when one node is resyncing it blocks all
+	  other nodes from writing anywhere on the array.
 
  The resync process is the regular md resync. However, in a clustered
  environment when a resync is performed, it needs to tell other nodes
@@ -198,6 +245,7 @@ The algorithm is:
  particular I/O range should be suspended or not.
 
 4.2 Device Failure
+==================
 
  Device failures are handled and communicated with the metadata update
  routine.  When a node detects a device failure it does not allow
@@ -205,38 +253,41 @@ The algorithm is:
  acknowledged by all other nodes.
 
 5. Adding a new Device
+----------------------
 
  For adding a new device, it is necessary that all nodes "see" the new
  device to be added. For this, the following algorithm is used:
 
-    1. Node 1 issues mdadm --manage /dev/mdX --add /dev/sdYY which issues
+   1.  Node 1 issues mdadm --manage /dev/mdX --add /dev/sdYY which issues
        ioctl(ADD_NEW_DISK with disc.state set to MD_DISK_CLUSTER_ADD)
-    2. Node 1 sends a NEWDISK message with uuid and slot number
-    3. Other nodes issue kobject_uevent_env with uuid and slot number
+   2.  Node 1 sends a NEWDISK message with uuid and slot number
+   3.  Other nodes issue kobject_uevent_env with uuid and slot number
        (Steps 4,5 could be a udev rule)
-    4. In userspace, the node searches for the disk, perhaps
+   4.  In userspace, the node searches for the disk, perhaps
        using blkid -t SUB_UUID=""
-    5. Other nodes issue either of the following depending on whether
+   5.  Other nodes issue either of the following depending on whether
        the disk was found:
        ioctl(ADD_NEW_DISK with disc.state set to MD_DISK_CANDIDATE and
-             disc.number set to slot number)
+       disc.number set to slot number)
        ioctl(CLUSTERED_DISK_NACK)
-    6. Other nodes drop lock on "no-new-devs" (CR) if device is found
-    7. Node 1 attempts EX lock on "no-new-dev"
-    8. If node 1 gets the lock, it sends METADATA_UPDATED after
+   6.  Other nodes drop lock on "no-new-devs" (CR) if device is found
+   7.  Node 1 attempts EX lock on "no-new-dev"
+   8.  If node 1 gets the lock, it sends METADATA_UPDATED after
        unmarking the disk as SpareLocal
-    9. If not (get "no-new-dev" lock), it fails the operation and sends
+   9.  If not (get "no-new-dev" lock), it fails the operation and sends
        METADATA_UPDATED.
    10. Other nodes get the information whether a disk is added or not
        by the following METADATA_UPDATED.
 
-6. Module interface.
+6. Module interface
+===================
 
  There are 17 call-backs which the md core can make to the cluster
  module.  Understanding these can give a good overview of the whole
  process.
 
 6.1 join(nodes) and leave()
+---------------------------
 
  These are called when an array is started with a clustered bitmap,
  and when the array is stopped.  join() ensures the cluster is
@@ -244,11 +295,13 @@ The algorithm is:
  Only the first 'nodes' nodes in the cluster can use the array.
 
 6.2 slot_number()
+-----------------
 
  Reports the slot number advised by the cluster infrastructure.
  Range is from 0 to nodes-1.
 
 6.3 resync_info_update()
+------------------------
 
  This updates the resync range that is stored in the bitmap lock.
  The starting point is updated as the resync progresses.  The
@@ -256,6 +309,7 @@ The algorithm is:
  It does *not* send a RESYNCING message.
 
 6.4 resync_start(), resync_finish()
+-----------------------------------
 
  These are called when resync/recovery/reshape starts or stops.
  They update the resyncing range in the bitmap lock and also
@@ -265,8 +319,8 @@ The algorithm is:
  resync_finish() also sends a BITMAP_NEEDS_SYNC message which
  allows some other node to take over.
 
-6.5 metadata_update_start(), metadata_update_finish(),
-    metadata_update_cancel().
+6.5 metadata_update_start(), metadata_update_finish(), metadata_update_cancel()
+-------------------------------------------------------------------------------
 
  metadata_update_start is used to get exclusive access to
  the metadata.  If a change is still needed once that access is
@@ -275,6 +329,7 @@ The algorithm is:
  can be used to release the lock.
 
 6.6 area_resyncing()
+--------------------
 
  This combines two elements of functionality.
 
@@ -289,6 +344,7 @@ The algorithm is:
  a node failure.
 
 6.7 add_new_disk_start(), add_new_disk_finish(), new_disk_ack()
+---------------------------------------------------------------
 
  These are used to manage the new-disk protocol described above.
  When a new device is added, add_new_disk_start() is called before
@@ -300,17 +356,20 @@ The algorithm is:
  new_disk_ack() is called.
 
 6.8 remove_disk()
+-----------------
 
  This is called when a spare or failed device is removed from
  the array.  It causes a REMOVE message to be send to other nodes.
 
 6.9 gather_bitmaps()
+--------------------
 
  This sends a RE_ADD message to all other nodes and then
  gathers bitmap information from all bitmaps.  This combined
  bitmap is then used to recovery the re-added device.
 
 6.10 lock_all_bitmaps() and unlock_all_bitmaps()
+------------------------------------------------
 
  These are called when change bitmap to none. If a node plans
  to clear the cluster raid's bitmap, it need to make sure no other
@@ -319,6 +378,7 @@ The algorithm is:
  accordingly.
 
 7. Unsupported features
+=======================
 
 There are somethings which are not supported by cluster MD yet.
 
diff --git a/Documentation/md/raid5-cache.txt b/Documentation/md/raid5-cache.rst
similarity index 92%
rename from Documentation/md/raid5-cache.txt
rename to Documentation/md/raid5-cache.rst
index 2b210f295786..d7a15f44a7c3 100644
--- a/Documentation/md/raid5-cache.txt
+++ b/Documentation/md/raid5-cache.rst
@@ -1,4 +1,6 @@
-RAID5 cache
+================
+RAID 4/5/6 cache
+================
 
 Raid 4/5/6 could include an extra disk for data cache besides normal RAID
 disks. The role of RAID disks isn't changed with the cache disk. The cache disk
@@ -6,19 +8,19 @@ caches data to the RAID disks. The cache can be in write-through (supported
 since 4.4) or write-back mode (supported since 4.10). mdadm (supported since
 3.4) has a new option '--write-journal' to create array with cache. Please
 refer to mdadm manual for details. By default (RAID array starts), the cache is
-in write-through mode. A user can switch it to write-back mode by:
+in write-through mode. A user can switch it to write-back mode by::
 
-echo "write-back" > /sys/block/md0/md/journal_mode
+	echo "write-back" > /sys/block/md0/md/journal_mode
 
-And switch it back to write-through mode by:
+And switch it back to write-through mode by::
 
-echo "write-through" > /sys/block/md0/md/journal_mode
+	echo "write-through" > /sys/block/md0/md/journal_mode
 
 In both modes, all writes to the array will hit cache disk first. This means
 the cache disk must be fast and sustainable.
 
--------------------------------------
-write-through mode:
+write-through mode
+==================
 
 This mode mainly fixes the 'write hole' issue. For RAID 4/5/6 array, an unclean
 shutdown can cause data in some stripes to not be in consistent state, eg, data
@@ -42,8 +44,8 @@ exposed to 'write hole' again.
 In write-through mode, the cache disk isn't required to be big. Several
 hundreds megabytes are enough.
 
---------------------------------------
-write-back mode:
+write-back mode
+===============
 
 write-back mode fixes the 'write hole' issue too, since all write data is
 cached on cache disk. But the main goal of 'write-back' cache is to speed up
@@ -64,16 +66,16 @@ data loss.
 In write-back mode, MD also caches data in memory. The memory cache includes
 the same data stored on cache disk, so a power loss doesn't cause data loss.
 The memory cache size has performance impact for the array. It's recommended
-the size is big. A user can configure the size by:
+the size is big. A user can configure the size by::
 
-echo "2048" > /sys/block/md0/md/stripe_cache_size
+	echo "2048" > /sys/block/md0/md/stripe_cache_size
 
 Too small cache disk will make the write aggregation less efficient in this
 mode depending on the workloads. It's recommended to use a cache disk with at
 least several gigabytes size in write-back mode.
 
---------------------------------------
-The implementation:
+The implementation
+==================
 
 The write-through and write-back cache use the same disk format. The cache disk
 is organized as a simple write log. The log consists of 'meta data' and 'data'
diff --git a/Documentation/md/raid5-ppl.txt b/Documentation/md/raid5-ppl.rst
similarity index 98%
rename from Documentation/md/raid5-ppl.txt
rename to Documentation/md/raid5-ppl.rst
index bfa092589e00..357e5515bc55 100644
--- a/Documentation/md/raid5-ppl.txt
+++ b/Documentation/md/raid5-ppl.rst
@@ -1,4 +1,6 @@
+==================
 Partial Parity Log
+==================
 
 Partial Parity Log (PPL) is a feature available for RAID5 arrays. The issue
 addressed by PPL is that after a dirty shutdown, parity of a particular stripe
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 69/79] docs: mtd: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (64 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 68/79] docs: md: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:27   ` [PATCH v2 70/79] docs: nvdimm: " Mauro Carvalho Chehab
                     ` (11 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Boris Brezillon, Miquel Raynal,
	Richard Weinberger, David Woodhouse, Brian Norris, Marek Vasut,
	linux-mtd

Rename the mtd documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

It should be noticed that Sphinx doesn't handle very well
URLs with dots in the middle. Thankfully, internally, the '.'
char is translated to %2E, so we can jus use %2E instead of
dots, and this will work fine on both text and processed files.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/mtd/index.rst                   |  12 +
 .../mtd/{intel-spi.txt => intel-spi.rst}      |  46 +-
 .../mtd/{nand_ecc.txt => nand_ecc.rst}        | 481 ++++++++++--------
 .../mtd/{spi-nor.txt => spi-nor.rst}          |   7 +-
 drivers/mtd/nand/raw/nand_ecc.c               |   2 +-
 5 files changed, 306 insertions(+), 242 deletions(-)
 create mode 100644 Documentation/mtd/index.rst
 rename Documentation/mtd/{intel-spi.txt => intel-spi.rst} (71%)
 rename Documentation/mtd/{nand_ecc.txt => nand_ecc.rst} (67%)
 rename Documentation/mtd/{spi-nor.txt => spi-nor.rst} (94%)

diff --git a/Documentation/mtd/index.rst b/Documentation/mtd/index.rst
new file mode 100644
index 000000000000..4fdae418ac97
--- /dev/null
+++ b/Documentation/mtd/index.rst
@@ -0,0 +1,12 @@
+:orphan:
+
+==============================
+Memory Technology Device (MTD)
+==============================
+
+.. toctree::
+   :maxdepth: 1
+
+   intel-spi
+   nand_ecc
+   spi-nor
diff --git a/Documentation/mtd/intel-spi.txt b/Documentation/mtd/intel-spi.rst
similarity index 71%
rename from Documentation/mtd/intel-spi.txt
rename to Documentation/mtd/intel-spi.rst
index bc357729c2cb..0e6d9cd5388d 100644
--- a/Documentation/mtd/intel-spi.txt
+++ b/Documentation/mtd/intel-spi.rst
@@ -1,5 +1,6 @@
+==============================
 Upgrading BIOS using intel-spi
-------------------------------
+==============================
 
 Many Intel CPUs like Baytrail and Braswell include SPI serial flash host
 controller which is used to hold BIOS and other platform specific data.
@@ -36,45 +37,45 @@ Linux.
     module parameter to modprobe).
 
  4) Once the board is up and running again, find the right MTD partition
-    (it is named as "BIOS"):
+    (it is named as "BIOS")::
 
-    # cat /proc/mtd
-    dev:    size   erasesize  name
-    mtd0: 00800000 00001000 "BIOS"
+	# cat /proc/mtd
+	dev:    size   erasesize  name
+	mtd0: 00800000 00001000 "BIOS"
 
     So here it will be /dev/mtd0 but it may vary.
 
- 5) Make backup of the existing image first:
+ 5) Make backup of the existing image first::
 
-    # dd if=/dev/mtd0ro of=bios.bak
-    16384+0 records in
-    16384+0 records out
-    8388608 bytes (8.4 MB) copied, 10.0269 s, 837 kB/s
+	# dd if=/dev/mtd0ro of=bios.bak
+	16384+0 records in
+	16384+0 records out
+	8388608 bytes (8.4 MB) copied, 10.0269 s, 837 kB/s
 
- 6) Verify the backup
+ 6) Verify the backup:
 
-    # sha1sum /dev/mtd0ro bios.bak
-    fdbb011920572ca6c991377c4b418a0502668b73  /dev/mtd0ro
-    fdbb011920572ca6c991377c4b418a0502668b73  bios.bak
+	# sha1sum /dev/mtd0ro bios.bak
+	fdbb011920572ca6c991377c4b418a0502668b73  /dev/mtd0ro
+	fdbb011920572ca6c991377c4b418a0502668b73  bios.bak
 
     The SHA1 sums must match. Otherwise do not continue any further!
 
  7) Erase the SPI serial flash. After this step, do not reboot the
-    board! Otherwise it will not start anymore.
+    board! Otherwise it will not start anymore::
 
-    # flash_erase /dev/mtd0 0 0
-    Erasing 4 Kibyte @ 7ff000 -- 100 % complete
+	# flash_erase /dev/mtd0 0 0
+	Erasing 4 Kibyte @ 7ff000 -- 100 % complete
 
  8) Once completed without errors you can write the new BIOS image:
 
     # dd if=MNW2MAX1.X64.0092.R01.1605221712.bin of=/dev/mtd0
 
  9) Verify that the new content of the SPI serial flash matches the new
-    BIOS image:
+    BIOS image::
 
-    # sha1sum /dev/mtd0ro MNW2MAX1.X64.0092.R01.1605221712.bin
-    9b4df9e4be2057fceec3a5529ec3d950836c87a2  /dev/mtd0ro
-    9b4df9e4be2057fceec3a5529ec3d950836c87a2 MNW2MAX1.X64.0092.R01.1605221712.bin
+	# sha1sum /dev/mtd0ro MNW2MAX1.X64.0092.R01.1605221712.bin
+	9b4df9e4be2057fceec3a5529ec3d950836c87a2  /dev/mtd0ro
+	9b4df9e4be2057fceec3a5529ec3d950836c87a2 MNW2MAX1.X64.0092.R01.1605221712.bin
 
     The SHA1 sums should match.
 
@@ -84,5 +85,6 @@ Linux.
 References
 ----------
 
-[1] https://firmware.intel.com/sites/default/files/MinnowBoard.MAX_.X64.92.R01.zip
+[1] https://firmware.intel.com/sites/default/files/MinnowBoard%2EMAX_%2EX64%2E92%2ER01%2Ezip
+
 [2] http://www.linux-mtd.infradead.org/
diff --git a/Documentation/mtd/nand_ecc.txt b/Documentation/mtd/nand_ecc.rst
similarity index 67%
rename from Documentation/mtd/nand_ecc.txt
rename to Documentation/mtd/nand_ecc.rst
index f8c3284bf6a7..e8d3c53a5056 100644
--- a/Documentation/mtd/nand_ecc.txt
+++ b/Documentation/mtd/nand_ecc.rst
@@ -1,3 +1,7 @@
+==========================
+NAND Error-correction Code
+==========================
+
 Introduction
 ============
 
@@ -37,63 +41,79 @@ sometimes also referred to as xor. In C the operator for xor is ^
 Back to ecc.
 Let's give a small figure:
 
+=========  ==== ==== ==== ==== ==== ==== ==== ====   === === === === ====
 byte   0:  bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0   rp0 rp2 rp4 ... rp14
 byte   1:  bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0   rp1 rp2 rp4 ... rp14
 byte   2:  bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0   rp0 rp3 rp4 ... rp14
 byte   3:  bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0   rp1 rp3 rp4 ... rp14
 byte   4:  bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0   rp0 rp2 rp5 ... rp14
-....
+...
 byte 254:  bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0   rp0 rp3 rp5 ... rp15
 byte 255:  bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0   rp1 rp3 rp5 ... rp15
            cp1  cp0  cp1  cp0  cp1  cp0  cp1  cp0
            cp3  cp3  cp2  cp2  cp3  cp3  cp2  cp2
            cp5  cp5  cp5  cp5  cp4  cp4  cp4  cp4
+=========  ==== ==== ==== ==== ==== ==== ==== ====   === === === === ====
 
 This figure represents a sector of 256 bytes.
 cp is my abbreviation for column parity, rp for row parity.
 
 Let's start to explain column parity.
-cp0 is the parity that belongs to all bit0, bit2, bit4, bit6.
-so the sum of all bit0, bit2, bit4 and bit6 values + cp0 itself is even.
+
+- cp0 is the parity that belongs to all bit0, bit2, bit4, bit6.
+
+  so the sum of all bit0, bit2, bit4 and bit6 values + cp0 itself is even.
+
 Similarly cp1 is the sum of all bit1, bit3, bit5 and bit7.
-cp2 is the parity over bit0, bit1, bit4 and bit5
-cp3 is the parity over bit2, bit3, bit6 and bit7.
-cp4 is the parity over bit0, bit1, bit2 and bit3.
-cp5 is the parity over bit4, bit5, bit6 and bit7.
+
+- cp2 is the parity over bit0, bit1, bit4 and bit5
+- cp3 is the parity over bit2, bit3, bit6 and bit7.
+- cp4 is the parity over bit0, bit1, bit2 and bit3.
+- cp5 is the parity over bit4, bit5, bit6 and bit7.
+
 Note that each of cp0 .. cp5 is exactly one bit.
 
 Row parity actually works almost the same.
-rp0 is the parity of all even bytes (0, 2, 4, 6, ... 252, 254)
-rp1 is the parity of all odd bytes (1, 3, 5, 7, ..., 253, 255)
-rp2 is the parity of all bytes 0, 1, 4, 5, 8, 9, ...
-(so handle two bytes, then skip 2 bytes).
-rp3 is covers the half rp2 does not cover (bytes 2, 3, 6, 7, 10, 11, ...)
-for rp4 the rule is cover 4 bytes, skip 4 bytes, cover 4 bytes, skip 4 etc.
-so rp4 calculates parity over bytes 0, 1, 2, 3, 8, 9, 10, 11, 16, ...)
-and rp5 covers the other half, so bytes 4, 5, 6, 7, 12, 13, 14, 15, 20, ..
+
+- rp0 is the parity of all even bytes (0, 2, 4, 6, ... 252, 254)
+- rp1 is the parity of all odd bytes (1, 3, 5, 7, ..., 253, 255)
+- rp2 is the parity of all bytes 0, 1, 4, 5, 8, 9, ...
+  (so handle two bytes, then skip 2 bytes).
+- rp3 is covers the half rp2 does not cover (bytes 2, 3, 6, 7, 10, 11, ...)
+- for rp4 the rule is cover 4 bytes, skip 4 bytes, cover 4 bytes, skip 4 etc.
+
+  so rp4 calculates parity over bytes 0, 1, 2, 3, 8, 9, 10, 11, 16, ...)
+- and rp5 covers the other half, so bytes 4, 5, 6, 7, 12, 13, 14, 15, 20, ..
+
 The story now becomes quite boring. I guess you get the idea.
-rp6 covers 8 bytes then skips 8 etc
-rp7 skips 8 bytes then covers 8 etc
-rp8 covers 16 bytes then skips 16 etc
-rp9 skips 16 bytes then covers 16 etc
-rp10 covers 32 bytes then skips 32 etc
-rp11 skips 32 bytes then covers 32 etc
-rp12 covers 64 bytes then skips 64 etc
-rp13 skips 64 bytes then covers 64 etc
-rp14 covers 128 bytes then skips 128
-rp15 skips 128 bytes then covers 128
+
+- rp6 covers 8 bytes then skips 8 etc
+- rp7 skips 8 bytes then covers 8 etc
+- rp8 covers 16 bytes then skips 16 etc
+- rp9 skips 16 bytes then covers 16 etc
+- rp10 covers 32 bytes then skips 32 etc
+- rp11 skips 32 bytes then covers 32 etc
+- rp12 covers 64 bytes then skips 64 etc
+- rp13 skips 64 bytes then covers 64 etc
+- rp14 covers 128 bytes then skips 128
+- rp15 skips 128 bytes then covers 128
 
 In the end the parity bits are grouped together in three bytes as
 follows:
+
+=====  ===== ===== ===== ===== ===== ===== ===== =====
 ECC    Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
+=====  ===== ===== ===== ===== ===== ===== ===== =====
 ECC 0   rp07  rp06  rp05  rp04  rp03  rp02  rp01  rp00
 ECC 1   rp15  rp14  rp13  rp12  rp11  rp10  rp09  rp08
 ECC 2   cp5   cp4   cp3   cp2   cp1   cp0      1     1
+=====  ===== ===== ===== ===== ===== ===== ===== =====
 
 I detected after writing this that ST application note AN1823
 (http://www.st.com/stonline/) gives a much
 nicer picture.(but they use line parity as term where I use row parity)
 Oh well, I'm graphically challenged, so suffer with me for a moment :-)
+
 And I could not reuse the ST picture anyway for copyright reasons.
 
 
@@ -101,9 +121,10 @@ Attempt 0
 =========
 
 Implementing the parity calculation is pretty simple.
-In C pseudocode:
-for (i = 0; i < 256; i++)
-{
+In C pseudocode::
+
+  for (i = 0; i < 256; i++)
+  {
     if (i & 0x01)
        rp1 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0 ^ rp1;
     else
@@ -142,7 +163,7 @@ for (i = 0; i < 256; i++)
     cp3 = bit7 ^ bit6 ^ bit3 ^ bit2 ^ cp3
     cp4 = bit3 ^ bit2 ^ bit1 ^ bit0 ^ cp4
     cp5 = bit7 ^ bit6 ^ bit5 ^ bit4 ^ cp5
-}
+  }
 
 
 Analysis 0
@@ -167,82 +188,84 @@ This leads to:
 Attempt 1
 =========
 
-const char parity[256] = {
-    0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
-    1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
-    1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
-    0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
-    1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
-    0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
-    0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
-    1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
-    1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
-    0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
-    0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
-    1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
-    0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
-    1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
-    1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
-    0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0
-};
+::
 
-void ecc1(const unsigned char *buf, unsigned char *code)
-{
-    int i;
-    const unsigned char *bp = buf;
-    unsigned char cur;
-    unsigned char rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7;
-    unsigned char rp8, rp9, rp10, rp11, rp12, rp13, rp14, rp15;
-    unsigned char par;
+  const char parity[256] = {
+      0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+      1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+      1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+      0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+      1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+      0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+      0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+      1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+      1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+      0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+      0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+      1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+      0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+      1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+      1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+      0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0
+  };
 
-    par = 0;
-    rp0 = 0; rp1 = 0; rp2 = 0; rp3 = 0;
-    rp4 = 0; rp5 = 0; rp6 = 0; rp7 = 0;
-    rp8 = 0; rp9 = 0; rp10 = 0; rp11 = 0;
-    rp12 = 0; rp13 = 0; rp14 = 0; rp15 = 0;
+  void ecc1(const unsigned char *buf, unsigned char *code)
+  {
+      int i;
+      const unsigned char *bp = buf;
+      unsigned char cur;
+      unsigned char rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7;
+      unsigned char rp8, rp9, rp10, rp11, rp12, rp13, rp14, rp15;
+      unsigned char par;
 
-    for (i = 0; i < 256; i++)
-    {
-        cur = *bp++;
-        par ^= cur;
-        if (i & 0x01) rp1 ^= cur; else rp0 ^= cur;
-        if (i & 0x02) rp3 ^= cur; else rp2 ^= cur;
-        if (i & 0x04) rp5 ^= cur; else rp4 ^= cur;
-        if (i & 0x08) rp7 ^= cur; else rp6 ^= cur;
-        if (i & 0x10) rp9 ^= cur; else rp8 ^= cur;
-        if (i & 0x20) rp11 ^= cur; else rp10 ^= cur;
-        if (i & 0x40) rp13 ^= cur; else rp12 ^= cur;
-        if (i & 0x80) rp15 ^= cur; else rp14 ^= cur;
-    }
-    code[0] =
-        (parity[rp7] << 7) |
-        (parity[rp6] << 6) |
-        (parity[rp5] << 5) |
-        (parity[rp4] << 4) |
-        (parity[rp3] << 3) |
-        (parity[rp2] << 2) |
-        (parity[rp1] << 1) |
-        (parity[rp0]);
-    code[1] =
-        (parity[rp15] << 7) |
-        (parity[rp14] << 6) |
-        (parity[rp13] << 5) |
-        (parity[rp12] << 4) |
-        (parity[rp11] << 3) |
-        (parity[rp10] << 2) |
-        (parity[rp9]  << 1) |
-        (parity[rp8]);
-    code[2] =
-        (parity[par & 0xf0] << 7) |
-        (parity[par & 0x0f] << 6) |
-        (parity[par & 0xcc] << 5) |
-        (parity[par & 0x33] << 4) |
-        (parity[par & 0xaa] << 3) |
-        (parity[par & 0x55] << 2);
-    code[0] = ~code[0];
-    code[1] = ~code[1];
-    code[2] = ~code[2];
-}
+      par = 0;
+      rp0 = 0; rp1 = 0; rp2 = 0; rp3 = 0;
+      rp4 = 0; rp5 = 0; rp6 = 0; rp7 = 0;
+      rp8 = 0; rp9 = 0; rp10 = 0; rp11 = 0;
+      rp12 = 0; rp13 = 0; rp14 = 0; rp15 = 0;
+
+      for (i = 0; i < 256; i++)
+      {
+          cur = *bp++;
+          par ^= cur;
+          if (i & 0x01) rp1 ^= cur; else rp0 ^= cur;
+          if (i & 0x02) rp3 ^= cur; else rp2 ^= cur;
+          if (i & 0x04) rp5 ^= cur; else rp4 ^= cur;
+          if (i & 0x08) rp7 ^= cur; else rp6 ^= cur;
+          if (i & 0x10) rp9 ^= cur; else rp8 ^= cur;
+          if (i & 0x20) rp11 ^= cur; else rp10 ^= cur;
+          if (i & 0x40) rp13 ^= cur; else rp12 ^= cur;
+          if (i & 0x80) rp15 ^= cur; else rp14 ^= cur;
+      }
+      code[0] =
+          (parity[rp7] << 7) |
+          (parity[rp6] << 6) |
+          (parity[rp5] << 5) |
+          (parity[rp4] << 4) |
+          (parity[rp3] << 3) |
+          (parity[rp2] << 2) |
+          (parity[rp1] << 1) |
+          (parity[rp0]);
+      code[1] =
+          (parity[rp15] << 7) |
+          (parity[rp14] << 6) |
+          (parity[rp13] << 5) |
+          (parity[rp12] << 4) |
+          (parity[rp11] << 3) |
+          (parity[rp10] << 2) |
+          (parity[rp9]  << 1) |
+          (parity[rp8]);
+      code[2] =
+          (parity[par & 0xf0] << 7) |
+          (parity[par & 0x0f] << 6) |
+          (parity[par & 0xcc] << 5) |
+          (parity[par & 0x33] << 4) |
+          (parity[par & 0xaa] << 3) |
+          (parity[par & 0x55] << 2);
+      code[0] = ~code[0];
+      code[1] = ~code[1];
+      code[2] = ~code[2];
+  }
 
 Still pretty straightforward. The last three invert statements are there to
 give a checksum of 0xff 0xff 0xff for an empty flash. In an empty flash
@@ -293,88 +316,90 @@ Let's give it a try...
 Attempt 2
 =========
 
-extern const char parity[256];
+::
 
-void ecc2(const unsigned char *buf, unsigned char *code)
-{
-    int i;
-    const unsigned long *bp = (unsigned long *)buf;
-    unsigned long cur;
-    unsigned long rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7;
-    unsigned long rp8, rp9, rp10, rp11, rp12, rp13, rp14, rp15;
-    unsigned long par;
+  extern const char parity[256];
 
-    par = 0;
-    rp0 = 0; rp1 = 0; rp2 = 0; rp3 = 0;
-    rp4 = 0; rp5 = 0; rp6 = 0; rp7 = 0;
-    rp8 = 0; rp9 = 0; rp10 = 0; rp11 = 0;
-    rp12 = 0; rp13 = 0; rp14 = 0; rp15 = 0;
+  void ecc2(const unsigned char *buf, unsigned char *code)
+  {
+      int i;
+      const unsigned long *bp = (unsigned long *)buf;
+      unsigned long cur;
+      unsigned long rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7;
+      unsigned long rp8, rp9, rp10, rp11, rp12, rp13, rp14, rp15;
+      unsigned long par;
 
-    for (i = 0; i < 64; i++)
-    {
-        cur = *bp++;
-        par ^= cur;
-        if (i & 0x01) rp5 ^= cur; else rp4 ^= cur;
-        if (i & 0x02) rp7 ^= cur; else rp6 ^= cur;
-        if (i & 0x04) rp9 ^= cur; else rp8 ^= cur;
-        if (i & 0x08) rp11 ^= cur; else rp10 ^= cur;
-        if (i & 0x10) rp13 ^= cur; else rp12 ^= cur;
-        if (i & 0x20) rp15 ^= cur; else rp14 ^= cur;
-    }
-    /*
-       we need to adapt the code generation for the fact that rp vars are now
-       long; also the column parity calculation needs to be changed.
-       we'll bring rp4 to 15 back to single byte entities by shifting and
-       xoring
-    */
-    rp4 ^= (rp4 >> 16); rp4 ^= (rp4 >> 8); rp4 &= 0xff;
-    rp5 ^= (rp5 >> 16); rp5 ^= (rp5 >> 8); rp5 &= 0xff;
-    rp6 ^= (rp6 >> 16); rp6 ^= (rp6 >> 8); rp6 &= 0xff;
-    rp7 ^= (rp7 >> 16); rp7 ^= (rp7 >> 8); rp7 &= 0xff;
-    rp8 ^= (rp8 >> 16); rp8 ^= (rp8 >> 8); rp8 &= 0xff;
-    rp9 ^= (rp9 >> 16); rp9 ^= (rp9 >> 8); rp9 &= 0xff;
-    rp10 ^= (rp10 >> 16); rp10 ^= (rp10 >> 8); rp10 &= 0xff;
-    rp11 ^= (rp11 >> 16); rp11 ^= (rp11 >> 8); rp11 &= 0xff;
-    rp12 ^= (rp12 >> 16); rp12 ^= (rp12 >> 8); rp12 &= 0xff;
-    rp13 ^= (rp13 >> 16); rp13 ^= (rp13 >> 8); rp13 &= 0xff;
-    rp14 ^= (rp14 >> 16); rp14 ^= (rp14 >> 8); rp14 &= 0xff;
-    rp15 ^= (rp15 >> 16); rp15 ^= (rp15 >> 8); rp15 &= 0xff;
-    rp3 = (par >> 16); rp3 ^= (rp3 >> 8); rp3 &= 0xff;
-    rp2 = par & 0xffff; rp2 ^= (rp2 >> 8); rp2 &= 0xff;
-    par ^= (par >> 16);
-    rp1 = (par >> 8); rp1 &= 0xff;
-    rp0 = (par & 0xff);
-    par ^= (par >> 8); par &= 0xff;
+      par = 0;
+      rp0 = 0; rp1 = 0; rp2 = 0; rp3 = 0;
+      rp4 = 0; rp5 = 0; rp6 = 0; rp7 = 0;
+      rp8 = 0; rp9 = 0; rp10 = 0; rp11 = 0;
+      rp12 = 0; rp13 = 0; rp14 = 0; rp15 = 0;
 
-    code[0] =
-        (parity[rp7] << 7) |
-        (parity[rp6] << 6) |
-        (parity[rp5] << 5) |
-        (parity[rp4] << 4) |
-        (parity[rp3] << 3) |
-        (parity[rp2] << 2) |
-        (parity[rp1] << 1) |
-        (parity[rp0]);
-    code[1] =
-        (parity[rp15] << 7) |
-        (parity[rp14] << 6) |
-        (parity[rp13] << 5) |
-        (parity[rp12] << 4) |
-        (parity[rp11] << 3) |
-        (parity[rp10] << 2) |
-        (parity[rp9]  << 1) |
-        (parity[rp8]);
-    code[2] =
-        (parity[par & 0xf0] << 7) |
-        (parity[par & 0x0f] << 6) |
-        (parity[par & 0xcc] << 5) |
-        (parity[par & 0x33] << 4) |
-        (parity[par & 0xaa] << 3) |
-        (parity[par & 0x55] << 2);
-    code[0] = ~code[0];
-    code[1] = ~code[1];
-    code[2] = ~code[2];
-}
+      for (i = 0; i < 64; i++)
+      {
+          cur = *bp++;
+          par ^= cur;
+          if (i & 0x01) rp5 ^= cur; else rp4 ^= cur;
+          if (i & 0x02) rp7 ^= cur; else rp6 ^= cur;
+          if (i & 0x04) rp9 ^= cur; else rp8 ^= cur;
+          if (i & 0x08) rp11 ^= cur; else rp10 ^= cur;
+          if (i & 0x10) rp13 ^= cur; else rp12 ^= cur;
+          if (i & 0x20) rp15 ^= cur; else rp14 ^= cur;
+      }
+      /*
+         we need to adapt the code generation for the fact that rp vars are now
+         long; also the column parity calculation needs to be changed.
+         we'll bring rp4 to 15 back to single byte entities by shifting and
+         xoring
+      */
+      rp4 ^= (rp4 >> 16); rp4 ^= (rp4 >> 8); rp4 &= 0xff;
+      rp5 ^= (rp5 >> 16); rp5 ^= (rp5 >> 8); rp5 &= 0xff;
+      rp6 ^= (rp6 >> 16); rp6 ^= (rp6 >> 8); rp6 &= 0xff;
+      rp7 ^= (rp7 >> 16); rp7 ^= (rp7 >> 8); rp7 &= 0xff;
+      rp8 ^= (rp8 >> 16); rp8 ^= (rp8 >> 8); rp8 &= 0xff;
+      rp9 ^= (rp9 >> 16); rp9 ^= (rp9 >> 8); rp9 &= 0xff;
+      rp10 ^= (rp10 >> 16); rp10 ^= (rp10 >> 8); rp10 &= 0xff;
+      rp11 ^= (rp11 >> 16); rp11 ^= (rp11 >> 8); rp11 &= 0xff;
+      rp12 ^= (rp12 >> 16); rp12 ^= (rp12 >> 8); rp12 &= 0xff;
+      rp13 ^= (rp13 >> 16); rp13 ^= (rp13 >> 8); rp13 &= 0xff;
+      rp14 ^= (rp14 >> 16); rp14 ^= (rp14 >> 8); rp14 &= 0xff;
+      rp15 ^= (rp15 >> 16); rp15 ^= (rp15 >> 8); rp15 &= 0xff;
+      rp3 = (par >> 16); rp3 ^= (rp3 >> 8); rp3 &= 0xff;
+      rp2 = par & 0xffff; rp2 ^= (rp2 >> 8); rp2 &= 0xff;
+      par ^= (par >> 16);
+      rp1 = (par >> 8); rp1 &= 0xff;
+      rp0 = (par & 0xff);
+      par ^= (par >> 8); par &= 0xff;
+
+      code[0] =
+          (parity[rp7] << 7) |
+          (parity[rp6] << 6) |
+          (parity[rp5] << 5) |
+          (parity[rp4] << 4) |
+          (parity[rp3] << 3) |
+          (parity[rp2] << 2) |
+          (parity[rp1] << 1) |
+          (parity[rp0]);
+      code[1] =
+          (parity[rp15] << 7) |
+          (parity[rp14] << 6) |
+          (parity[rp13] << 5) |
+          (parity[rp12] << 4) |
+          (parity[rp11] << 3) |
+          (parity[rp10] << 2) |
+          (parity[rp9]  << 1) |
+          (parity[rp8]);
+      code[2] =
+          (parity[par & 0xf0] << 7) |
+          (parity[par & 0x0f] << 6) |
+          (parity[par & 0xcc] << 5) |
+          (parity[par & 0x33] << 4) |
+          (parity[par & 0xaa] << 3) |
+          (parity[par & 0x55] << 2);
+      code[0] = ~code[0];
+      code[1] = ~code[1];
+      code[2] = ~code[2];
+  }
 
 The parity array is not shown any more. Note also that for these
 examples I kinda deviated from my regular programming style by allowing
@@ -403,28 +428,32 @@ lookups
 Attempt 3
 =========
 
-Odd replaced:
-        if (i & 0x01) rp5 ^= cur; else rp4 ^= cur;
-        if (i & 0x02) rp7 ^= cur; else rp6 ^= cur;
-        if (i & 0x04) rp9 ^= cur; else rp8 ^= cur;
-        if (i & 0x08) rp11 ^= cur; else rp10 ^= cur;
-        if (i & 0x10) rp13 ^= cur; else rp12 ^= cur;
-        if (i & 0x20) rp15 ^= cur; else rp14 ^= cur;
-with
-        if (i & 0x01) rp5 ^= cur;
-        if (i & 0x02) rp7 ^= cur;
-        if (i & 0x04) rp9 ^= cur;
-        if (i & 0x08) rp11 ^= cur;
-        if (i & 0x10) rp13 ^= cur;
-        if (i & 0x20) rp15 ^= cur;
+Odd replaced::
 
-        and outside the loop added:
-        rp4  = par ^ rp5;
-        rp6  = par ^ rp7;
-        rp8  = par ^ rp9;
-        rp10  = par ^ rp11;
-        rp12  = par ^ rp13;
-        rp14  = par ^ rp15;
+          if (i & 0x01) rp5 ^= cur; else rp4 ^= cur;
+          if (i & 0x02) rp7 ^= cur; else rp6 ^= cur;
+          if (i & 0x04) rp9 ^= cur; else rp8 ^= cur;
+          if (i & 0x08) rp11 ^= cur; else rp10 ^= cur;
+          if (i & 0x10) rp13 ^= cur; else rp12 ^= cur;
+          if (i & 0x20) rp15 ^= cur; else rp14 ^= cur;
+
+with::
+
+          if (i & 0x01) rp5 ^= cur;
+          if (i & 0x02) rp7 ^= cur;
+          if (i & 0x04) rp9 ^= cur;
+          if (i & 0x08) rp11 ^= cur;
+          if (i & 0x10) rp13 ^= cur;
+          if (i & 0x20) rp15 ^= cur;
+
+and outside the loop added::
+
+          rp4  = par ^ rp5;
+          rp6  = par ^ rp7;
+          rp8  = par ^ rp9;
+          rp10  = par ^ rp11;
+          rp12  = par ^ rp13;
+          rp14  = par ^ rp15;
 
 And after that the code takes about 30% more time, although the number of
 statements is reduced. This is also reflected in the assembly code.
@@ -448,7 +477,7 @@ Attempt 4
 =========
 
 Unrolled the loop 1, 2, 3 and 4 times.
-For 4 the code starts with:
+For 4 the code starts with::
 
     for (i = 0; i < 4; i++)
     {
@@ -471,8 +500,11 @@ Analysis 4
 ==========
 
 Unrolling once gains about 15%
+
 Unrolling twice keeps the gain at about 15%
+
 Unrolling three times gives a gain of 30% compared to attempt 2.
+
 Unrolling four times gives a marginal improvement compared to unrolling
 three times.
 
@@ -492,8 +524,10 @@ Attempt 5
 
 Effectively so all odd digit rp assignments in the loop were removed.
 This included the else clause of the if statements.
-Of course after the loop we need to correct things by adding code like:
+Of course after the loop we need to correct things by adding code like::
+
     rp5 = par ^ rp4;
+
 Also the initial assignments (rp5 = 0; etc) could be removed.
 Along the line I also removed the initialisation of rp0/1/2/3.
 
@@ -513,7 +547,7 @@ statement. Time for yet another version!
 Attempt 6
 =========
 
-THe code within the for loop was changed to:
+THe code within the for loop was changed to::
 
     for (i = 0; i < 4; i++)
     {
@@ -564,13 +598,17 @@ million iterations in order not to lose too much accuracy. This one
 definitely seemed to be the jackpot!
 
 There is a little bit more room for improvement though. There are three
-places with statements:
-rp4 ^= cur; rp6 ^= cur;
+places with statements::
+
+	rp4 ^= cur; rp6 ^= cur;
+
 It seems more efficient to also maintain a variable rp4_6 in the while
 loop; This eliminates 3 statements per loop. Of course after the loop we
-need to correct by adding:
-    rp4 ^= rp4_6;
-    rp6 ^= rp4_6
+need to correct by adding::
+
+	rp4 ^= rp4_6;
+	rp6 ^= rp4_6
+
 Furthermore there are 4 sequential assignments to rp8. This can be
 encoded slightly more efficiently by saving tmppar before those 4 lines
 and later do rp8 = rp8 ^ tmppar ^ notrp8;
@@ -582,7 +620,7 @@ Time for a new test!
 Attempt 7
 =========
 
-The new code now looks like:
+The new code now looks like::
 
     for (i = 0; i < 4; i++)
     {
@@ -644,9 +682,12 @@ Although it seems that the code within the loop cannot be optimised
 further there is still room to optimize the generation of the ecc codes.
 We can simply calculate the total parity. If this is 0 then rp4 = rp5
 etc. If the parity is 1, then rp4 = !rp5;
+
 But if rp4 = rp5 we do not need rp5 etc. We can just write the even bits
-in the result byte and then do something like
+in the result byte and then do something like::
+
     code[0] |= (code[0] << 1);
+
 Lets test this.
 
 
@@ -657,11 +698,13 @@ Changed the code but again this slightly degrades performance. Tried all
 kind of other things, like having dedicated parity arrays to avoid the
 shift after parity[rp7] << 7; No gain.
 Change the lookup using the parity array by using shift operators (e.g.
-replace parity[rp7] << 7 with:
-rp7 ^= (rp7 << 4);
-rp7 ^= (rp7 << 2);
-rp7 ^= (rp7 << 1);
-rp7 &= 0x80;
+replace parity[rp7] << 7 with::
+
+	rp7 ^= (rp7 << 4);
+	rp7 ^= (rp7 << 2);
+	rp7 ^= (rp7 << 1);
+	rp7 &= 0x80;
+
 No gain.
 
 The only marginal change was inverting the parity bits, so we can remove
@@ -683,13 +726,16 @@ Correcting errors
 
 For correcting errors I again used the ST application note as a starter,
 but I also peeked at the existing code.
+
 The algorithm itself is pretty straightforward. Just xor the given and
 the calculated ecc. If all bytes are 0 there is no problem. If 11 bits
 are 1 we have one correctable bit error. If there is 1 bit 1, we have an
 error in the given ecc code.
+
 It proved to be fastest to do some table lookups. Performance gain
 introduced by this is about a factor 2 on my system when a repair had to
 be done, and 1% or so if no repair had to be done.
+
 Code size increased from 330 bytes to 686 bytes for this function.
 (gcc 4.2, -O3)
 
@@ -700,8 +746,10 @@ Conclusion
 The gain when calculating the ecc is tremendous. Om my development hardware
 a speedup of a factor of 18 for ecc calculation was achieved. On a test on an
 embedded system with a MIPS core a factor 7 was obtained.
+
 On a test with a Linksys NSLU2 (ARMv5TE processor) the speedup was a factor
 5 (big endian mode, gcc 4.1.2, -O3)
+
 For correction not much gain could be obtained (as bitflips are rare). Then
 again there are also much less cycles spent there.
 
@@ -711,4 +759,5 @@ out of it with an assembler program, but due to pipeline behaviour etc
 this is very tricky (at least for intel hw).
 
 Author: Frans Meulenbroeks
+
 Copyright (C) 2008 Koninklijke Philips Electronics NV.
diff --git a/Documentation/mtd/spi-nor.txt b/Documentation/mtd/spi-nor.rst
similarity index 94%
rename from Documentation/mtd/spi-nor.txt
rename to Documentation/mtd/spi-nor.rst
index da1fbff5a24c..f5333e3bf486 100644
--- a/Documentation/mtd/spi-nor.txt
+++ b/Documentation/mtd/spi-nor.rst
@@ -1,5 +1,6 @@
-                          SPI NOR framework
-               ============================================
+=================
+SPI NOR framework
+=================
 
 Part I - Why do we need this framework?
 ---------------------------------------
@@ -23,7 +24,7 @@ This framework just adds a new layer between the MTD and the SPI bus driver.
 With this new layer, the SPI NOR controller driver does not depend on the
 m25p80 code anymore.
 
-   Before this framework, the layer is like:
+Before this framework, the layer is like::
 
                    MTD
          ------------------------
diff --git a/drivers/mtd/nand/raw/nand_ecc.c b/drivers/mtd/nand/raw/nand_ecc.c
index 4f4347533058..7d60e1e4ff4d 100644
--- a/drivers/mtd/nand/raw/nand_ecc.c
+++ b/drivers/mtd/nand/raw/nand_ecc.c
@@ -10,7 +10,7 @@
  *   Thomas Gleixner (tglx@linutronix.de)
  *
  * Information on how this algorithm works and how it was developed
- * can be found in Documentation/mtd/nand_ecc.txt
+ * can be found in Documentation/mtd/nand_ecc.rst
  *
  * This file is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 70/79] docs: nvdimm: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (65 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 69/79] docs: mtd: " Mauro Carvalho Chehab
@ 2019-04-22 13:27   ` Mauro Carvalho Chehab
  2019-04-22 13:28   ` [PATCH v2 71/79] docs: xtensa: " Mauro Carvalho Chehab
                     ` (10 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:27 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Dan Williams, Vishal Verma, Dave Jiang,
	Keith Busch, Ira Weiny, linux-nvdimm

Rename the mtd documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/nvdimm/{btt.txt => btt.rst}     | 139 ++---
 Documentation/nvdimm/index.rst                |  12 +
 .../nvdimm/{nvdimm.txt => nvdimm.rst}         | 518 ++++++++++--------
 .../nvdimm/{security.txt => security.rst}     |   4 +-
 drivers/nvdimm/Kconfig                        |   2 +-
 5 files changed, 388 insertions(+), 287 deletions(-)
 rename Documentation/nvdimm/{btt.txt => btt.rst} (71%)
 create mode 100644 Documentation/nvdimm/index.rst
 rename Documentation/nvdimm/{nvdimm.txt => nvdimm.rst} (60%)
 rename Documentation/nvdimm/{security.txt => security.rst} (99%)

diff --git a/Documentation/nvdimm/btt.txt b/Documentation/nvdimm/btt.rst
similarity index 71%
rename from Documentation/nvdimm/btt.txt
rename to Documentation/nvdimm/btt.rst
index e293fb664924..20727c9bbbe5 100644
--- a/Documentation/nvdimm/btt.txt
+++ b/Documentation/nvdimm/btt.rst
@@ -1,9 +1,10 @@
+=============================
 BTT - Block Translation Table
 =============================
 
 
 1. Introduction
----------------
+===============
 
 Persistent memory based storage is able to perform IO at byte (or more
 accurately, cache line) granularity. However, we often want to expose such
@@ -25,7 +26,7 @@ provides atomic sector updates.
 
 
 2. Static Layout
-----------------
+================
 
 The underlying storage on which a BTT can be laid out is not limited in any way.
 The BTT, however, splits the available space into chunks of up to 512 GiB,
@@ -33,43 +34,43 @@ called "Arenas".
 
 Each arena follows the same layout for its metadata, and all references in an
 arena are internal to it (with the exception of one field that points to the
-next arena). The following depicts the "On-disk" metadata layout:
+next arena). The following depicts the "On-disk" metadata layout::
 
 
-  Backing Store     +------->  Arena
-+---------------+   |   +------------------+
-|               |   |   | Arena info block |
-|    Arena 0    +---+   |       4K         |
-|     512G      |       +------------------+
-|               |       |                  |
-+---------------+       |                  |
-|               |       |                  |
-|    Arena 1    |       |   Data Blocks    |
-|     512G      |       |                  |
-|               |       |                  |
-+---------------+       |                  |
-|       .       |       |                  |
-|       .       |       |                  |
-|       .       |       |                  |
-|               |       |                  |
-|               |       |                  |
-+---------------+       +------------------+
-                        |                  |
-                        |     BTT Map      |
-                        |                  |
-                        |                  |
-                        +------------------+
-                        |                  |
-                        |     BTT Flog     |
-                        |                  |
-                        +------------------+
-                        | Info block copy  |
-                        |       4K         |
-                        +------------------+
+    Backing Store     +------->  Arena
+  +---------------+   |   +------------------+
+  |               |   |   | Arena info block |
+  |    Arena 0    +---+   |       4K         |
+  |     512G      |       +------------------+
+  |               |       |                  |
+  +---------------+       |                  |
+  |               |       |                  |
+  |    Arena 1    |       |   Data Blocks    |
+  |     512G      |       |                  |
+  |               |       |                  |
+  +---------------+       |                  |
+  |       .       |       |                  |
+  |       .       |       |                  |
+  |       .       |       |                  |
+  |               |       |                  |
+  |               |       |                  |
+  +---------------+       +------------------+
+                          |                  |
+                          |     BTT Map      |
+                          |                  |
+                          |                  |
+                          +------------------+
+                          |                  |
+                          |     BTT Flog     |
+                          |                  |
+                          +------------------+
+                          | Info block copy  |
+                          |       4K         |
+                          +------------------+
 
 
 3. Theory of Operation
-----------------------
+======================
 
 
 a. The BTT Map
@@ -79,31 +80,37 @@ The map is a simple lookup/indirection table that maps an LBA to an internal
 block. Each map entry is 32 bits. The two most significant bits are special
 flags, and the remaining form the internal block number.
 
+======== =============================================================
 Bit      Description
-31 - 30	: Error and Zero flags - Used in the following way:
-	 Bit		      Description
-	31 30
-	-----------------------------------------------------------------------
-	 00	Initial state. Reads return zeroes; Premap = Postmap
-	 01	Zero state: Reads return zeroes
-	 10	Error state: Reads fail; Writes clear 'E' bit
-	 11	Normal Block – has valid postmap
+======== =============================================================
+31 - 30	 Error and Zero flags - Used in the following way:
 
+	   == ==  ====================================================
+	   31 30  Description
+	   == ==  ====================================================
+	   0  0	  Initial state. Reads return zeroes; Premap = Postmap
+	   0  1	  Zero state: Reads return zeroes
+	   1  0	  Error state: Reads fail; Writes clear 'E' bit
+	   1  1	  Normal Block – has valid postmap
+	   == ==  ====================================================
 
-29 - 0	: Mappings to internal 'postmap' blocks
+29 - 0	 Mappings to internal 'postmap' blocks
+======== =============================================================
 
 
 Some of the terminology that will be subsequently used:
 
-External LBA  : LBA as made visible to upper layers.
-ABA           : Arena Block Address - Block offset/number within an arena
-Premap ABA    : The block offset into an arena, which was decided upon by range
+============	================================================================
+External LBA	LBA as made visible to upper layers.
+ABA		Arena Block Address - Block offset/number within an arena
+Premap ABA	The block offset into an arena, which was decided upon by range
 		checking the External LBA
-Postmap ABA   : The block number in the "Data Blocks" area obtained after
+Postmap ABA	The block number in the "Data Blocks" area obtained after
 		indirection from the map
-nfree	      : The number of free blocks that are maintained at any given time.
+nfree		The number of free blocks that are maintained at any given time.
 		This is the number of concurrent writes that can happen to the
 		arena.
+============	================================================================
 
 
 For example, after adding a BTT, we surface a disk of 1024G. We get a read for
@@ -121,19 +128,21 @@ i.e. Every write goes to a "free" block. A running list of free blocks is
 maintained in the form of the BTT flog. 'Flog' is a combination of the words
 "free list" and "log". The flog contains 'nfree' entries, and an entry contains:
 
-lba     : The premap ABA that is being written to
-old_map : The old postmap ABA - after 'this' write completes, this will be a
+========  =====================================================================
+lba       The premap ABA that is being written to
+old_map   The old postmap ABA - after 'this' write completes, this will be a
 	  free block.
-new_map : The new postmap ABA. The map will up updated to reflect this
+new_map   The new postmap ABA. The map will up updated to reflect this
 	  lba->postmap_aba mapping, but we log it here in case we have to
 	  recover.
-seq	: Sequence number to mark which of the 2 sections of this flog entry is
+seq	  Sequence number to mark which of the 2 sections of this flog entry is
 	  valid/newest. It cycles between 01->10->11->01 (binary) under normal
 	  operation, with 00 indicating an uninitialized state.
-lba'	: alternate lba entry
-old_map': alternate old postmap entry
-new_map': alternate new postmap entry
-seq'	: alternate sequence number.
+lba'	  alternate lba entry
+old_map'  alternate old postmap entry
+new_map'  alternate new postmap entry
+seq'	  alternate sequence number.
+========  =====================================================================
 
 Each of the above fields is 32-bit, making one entry 32 bytes. Entries are also
 padded to 64 bytes to avoid cache line sharing or aliasing. Flog updates are
@@ -147,8 +156,10 @@ c. The concept of lanes
 
 While 'nfree' describes the number of concurrent IOs an arena can process
 concurrently, 'nlanes' is the number of IOs the BTT device as a whole can
-process.
- nlanes = min(nfree, num_cpus)
+process::
+
+	nlanes = min(nfree, num_cpus)
+
 A lane number is obtained at the start of any IO, and is used for indexing into
 all the on-disk and in-memory data structures for the duration of the IO. If
 there are more CPUs than the max number of available lanes, than lanes are
@@ -180,10 +191,10 @@ e. In-memory data structure: map locks
 --------------------------------------
 
 Consider a case where two writer threads are writing to the same LBA. There can
-be a race in the following sequence of steps:
+be a race in the following sequence of steps::
 
-free[lane] = map[premap_aba]
-map[premap_aba] = postmap_aba
+	free[lane] = map[premap_aba]
+	map[premap_aba] = postmap_aba
 
 Both threads can update their respective free[lane] with the same old, freed
 postmap_aba. This has made the layout inconsistent by losing a free entry, and
@@ -202,6 +213,7 @@ On startup, we analyze the BTT flog to create our list of free blocks. We walk
 through all the entries, and for each lane, of the set of two possible
 'sections', we always look at the most recent one only (based on the sequence
 number). The reconstruction rules/steps are simple:
+
 - Read map[log_entry.lba].
 - If log_entry.new matches the map entry, then log_entry.old is free.
 - If log_entry.new does not match the map entry, then log_entry.new is free.
@@ -228,7 +240,7 @@ Write:
 1.  Convert external LBA to Arena number + pre-map ABA
 2.  Get a lane (and take lane_lock)
 3.  Use lane to index into in-memory free list and obtain a new block, next flog
-        index, next sequence number
+    index, next sequence number
 4.  Scan the RTT to check if free block is present, and spin/wait if it is.
 5.  Write data to this free block
 6.  Read map to get the existing post-map ABA entry for this pre-map ABA
@@ -245,6 +257,7 @@ Write:
 An arena would be in an error state if any of the metadata is corrupted
 irrecoverably, either due to a bug or a media error. The following conditions
 indicate an error:
+
 - Info block checksum does not match (and recovering from the copy also fails)
 - All internal available blocks are not uniquely and entirely addressed by the
   sum of mapped blocks and free blocks (from the BTT flog).
@@ -263,7 +276,7 @@ The BTT can be set up on any disk (namespace) exposed by the libnvdimm subsystem
 (pmem, or blk mode). The easiest way to set up such a namespace is using the
 'ndctl' utility [1]:
 
-For example, the ndctl command line to setup a btt with a 4k sector size is:
+For example, the ndctl command line to setup a btt with a 4k sector size is::
 
     ndctl create-namespace -f -e namespace0.0 -m sector -l 4k
 
diff --git a/Documentation/nvdimm/index.rst b/Documentation/nvdimm/index.rst
new file mode 100644
index 000000000000..1a3402d3775e
--- /dev/null
+++ b/Documentation/nvdimm/index.rst
@@ -0,0 +1,12 @@
+:orphan:
+
+===================================
+Non-Volatile Memory Device (NVDIMM)
+===================================
+
+.. toctree::
+   :maxdepth: 1
+
+   nvdimm
+   btt
+   security
diff --git a/Documentation/nvdimm/nvdimm.txt b/Documentation/nvdimm/nvdimm.rst
similarity index 60%
rename from Documentation/nvdimm/nvdimm.txt
rename to Documentation/nvdimm/nvdimm.rst
index e894de69915a..e47da39c8e20 100644
--- a/Documentation/nvdimm/nvdimm.txt
+++ b/Documentation/nvdimm/nvdimm.rst
@@ -1,8 +1,14 @@
-			  LIBNVDIMM: Non-Volatile Devices
-	      libnvdimm - kernel / libndctl - userspace helper library
-			   linux-nvdimm@lists.01.org
-				      v13
+===============================
+LIBNVDIMM: Non-Volatile Devices
+===============================
 
+libnvdimm - kernel / libndctl - userspace helper library
+
+linux-nvdimm@lists.01.org
+
+Version 13
+
+.. contents:
 
 	Glossary
 	Overview
@@ -40,49 +46,57 @@
 
 
 Glossary
---------
-
-PMEM: A system-physical-address range where writes are persistent.  A
-block device composed of PMEM is capable of DAX.  A PMEM address range
-may span an interleave of several DIMMs.
-
-BLK: A set of one or more programmable memory mapped apertures provided
-by a DIMM to access its media.  This indirection precludes the
-performance benefit of interleaving, but enables DIMM-bounded failure
-modes.
-
-DPA: DIMM Physical Address, is a DIMM-relative offset.  With one DIMM in
-the system there would be a 1:1 system-physical-address:DPA association.
-Once more DIMMs are added a memory controller interleave must be
-decoded to determine the DPA associated with a given
-system-physical-address.  BLK capacity always has a 1:1 relationship
-with a single-DIMM's DPA range.
-
-DAX: File system extensions to bypass the page cache and block layer to
-mmap persistent memory, from a PMEM block device, directly into a
-process address space.
-
-DSM: Device Specific Method: ACPI method to to control specific
-device - in this case the firmware.
-
-DCR: NVDIMM Control Region Structure defined in ACPI 6 Section 5.2.25.5.
-It defines a vendor-id, device-id, and interface format for a given DIMM.
-
-BTT: Block Translation Table: Persistent memory is byte addressable.
-Existing software may have an expectation that the power-fail-atomicity
-of writes is at least one sector, 512 bytes.  The BTT is an indirection
-table with atomic update semantics to front a PMEM/BLK block device
-driver and present arbitrary atomic sector sizes.
-
-LABEL: Metadata stored on a DIMM device that partitions and identifies
-(persistently names) storage between PMEM and BLK.  It also partitions
-BLK storage to host BTTs with different parameters per BLK-partition.
-Note that traditional partition tables, GPT/MBR, are layered on top of a
-BLK or PMEM device.
+========
+
+PMEM:
+  A system-physical-address range where writes are persistent.  A
+  block device composed of PMEM is capable of DAX.  A PMEM address range
+  may span an interleave of several DIMMs.
+
+BLK:
+  A set of one or more programmable memory mapped apertures provided
+  by a DIMM to access its media.  This indirection precludes the
+  performance benefit of interleaving, but enables DIMM-bounded failure
+  modes.
+
+DPA:
+  DIMM Physical Address, is a DIMM-relative offset.  With one DIMM in
+  the system there would be a 1:1 system-physical-address:DPA association.
+  Once more DIMMs are added a memory controller interleave must be
+  decoded to determine the DPA associated with a given
+  system-physical-address.  BLK capacity always has a 1:1 relationship
+  with a single-DIMM's DPA range.
+
+DAX:
+  File system extensions to bypass the page cache and block layer to
+  mmap persistent memory, from a PMEM block device, directly into a
+  process address space.
+
+DSM:
+  Device Specific Method: ACPI method to to control specific
+  device - in this case the firmware.
+
+DCR:
+  NVDIMM Control Region Structure defined in ACPI 6 Section 5.2.25.5.
+  It defines a vendor-id, device-id, and interface format for a given DIMM.
+
+BTT:
+  Block Translation Table: Persistent memory is byte addressable.
+  Existing software may have an expectation that the power-fail-atomicity
+  of writes is at least one sector, 512 bytes.  The BTT is an indirection
+  table with atomic update semantics to front a PMEM/BLK block device
+  driver and present arbitrary atomic sector sizes.
+
+LABEL:
+  Metadata stored on a DIMM device that partitions and identifies
+  (persistently names) storage between PMEM and BLK.  It also partitions
+  BLK storage to host BTTs with different parameters per BLK-partition.
+  Note that traditional partition tables, GPT/MBR, are layered on top of a
+  BLK or PMEM device.
 
 
 Overview
---------
+========
 
 The LIBNVDIMM subsystem provides support for three types of NVDIMMs, namely,
 PMEM, BLK, and NVDIMM devices that can simultaneously support both PMEM
@@ -96,19 +110,30 @@ accessible via BLK.  When that occurs a LABEL is needed to reserve DPA
 for exclusive access via one mode a time.
 
 Supporting Documents
-ACPI 6: http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf
-NVDIMM Namespace: http://pmem.io/documents/NVDIMM_Namespace_Spec.pdf
-DSM Interface Example: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
-Driver Writer's Guide: http://pmem.io/documents/NVDIMM_Driver_Writers_Guide.pdf
+--------------------
+
+ACPI 6:
+	http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf
+NVDIMM Namespace:
+	http://pmem.io/documents/NVDIMM_Namespace_Spec.pdf
+DSM Interface Example:
+	http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
+Driver Writer's Guide:
+	http://pmem.io/documents/NVDIMM_Driver_Writers_Guide.pdf
 
 Git Trees
-LIBNVDIMM: https://git.kernel.org/cgit/linux/kernel/git/djbw/nvdimm.git
-LIBNDCTL: https://github.com/pmem/ndctl.git
-PMEM: https://github.com/01org/prd
+---------
+
+LIBNVDIMM:
+	https://git.kernel.org/cgit/linux/kernel/git/djbw/nvdimm.git
+LIBNDCTL:
+	https://github.com/pmem/ndctl.git
+PMEM:
+	https://github.com/01org/prd
 
 
 LIBNVDIMM PMEM and BLK
-------------------
+======================
 
 Prior to the arrival of the NFIT, non-volatile memory was described to a
 system in various ad-hoc ways.  Usually only the bare minimum was
@@ -122,38 +147,39 @@ For each NVDIMM access method (PMEM, BLK), LIBNVDIMM provides a block
 device driver:
 
     1. PMEM (nd_pmem.ko): Drives a system-physical-address range.  This
-    range is contiguous in system memory and may be interleaved (hardware
-    memory controller striped) across multiple DIMMs.  When interleaved the
-    platform may optionally provide details of which DIMMs are participating
-    in the interleave.
+       range is contiguous in system memory and may be interleaved (hardware
+       memory controller striped) across multiple DIMMs.  When interleaved the
+       platform may optionally provide details of which DIMMs are participating
+       in the interleave.
 
-    Note that while LIBNVDIMM describes system-physical-address ranges that may
-    alias with BLK access as ND_NAMESPACE_PMEM ranges and those without
-    alias as ND_NAMESPACE_IO ranges, to the nd_pmem driver there is no
-    distinction.  The different device-types are an implementation detail
-    that userspace can exploit to implement policies like "only interface
-    with address ranges from certain DIMMs".  It is worth noting that when
-    aliasing is present and a DIMM lacks a label, then no block device can
-    be created by default as userspace needs to do at least one allocation
-    of DPA to the PMEM range.  In contrast ND_NAMESPACE_IO ranges, once
-    registered, can be immediately attached to nd_pmem.
+       Note that while LIBNVDIMM describes system-physical-address ranges that may
+       alias with BLK access as ND_NAMESPACE_PMEM ranges and those without
+       alias as ND_NAMESPACE_IO ranges, to the nd_pmem driver there is no
+       distinction.  The different device-types are an implementation detail
+       that userspace can exploit to implement policies like "only interface
+       with address ranges from certain DIMMs".  It is worth noting that when
+       aliasing is present and a DIMM lacks a label, then no block device can
+       be created by default as userspace needs to do at least one allocation
+       of DPA to the PMEM range.  In contrast ND_NAMESPACE_IO ranges, once
+       registered, can be immediately attached to nd_pmem.
 
     2. BLK (nd_blk.ko): This driver performs I/O using a set of platform
-    defined apertures.  A set of apertures will access just one DIMM.
-    Multiple windows (apertures) allow multiple concurrent accesses, much like
-    tagged-command-queuing, and would likely be used by different threads or
-    different CPUs.
+       defined apertures.  A set of apertures will access just one DIMM.
+       Multiple windows (apertures) allow multiple concurrent accesses, much like
+       tagged-command-queuing, and would likely be used by different threads or
+       different CPUs.
 
-    The NFIT specification defines a standard format for a BLK-aperture, but
-    the spec also allows for vendor specific layouts, and non-NFIT BLK
-    implementations may have other designs for BLK I/O.  For this reason
-    "nd_blk" calls back into platform-specific code to perform the I/O.
-    One such implementation is defined in the "Driver Writer's Guide" and "DSM
-    Interface Example".
+       The NFIT specification defines a standard format for a BLK-aperture, but
+       the spec also allows for vendor specific layouts, and non-NFIT BLK
+       implementations may have other designs for BLK I/O.  For this reason
+       "nd_blk" calls back into platform-specific code to perform the I/O.
+
+       One such implementation is defined in the "Driver Writer's Guide" and "DSM
+       Interface Example".
 
 
 Why BLK?
---------
+========
 
 While PMEM provides direct byte-addressable CPU-load/store access to
 NVDIMM storage, it does not provide the best system RAS (recovery,
@@ -162,12 +188,15 @@ system-physical-address address causes a CPU exception while an access
 to a corrupted address through an BLK-aperture causes that block window
 to raise an error status in a register.  The latter is more aligned with
 the standard error model that host-bus-adapter attached disks present.
+
 Also, if an administrator ever wants to replace a memory it is easier to
 service a system at DIMM module boundaries.  Compare this to PMEM where
 data could be interleaved in an opaque hardware specific manner across
 several DIMMs.
 
 PMEM vs BLK
+-----------
+
 BLK-apertures solve these RAS problems, but their presence is also the
 major contributing factor to the complexity of the ND subsystem.  They
 complicate the implementation because PMEM and BLK alias in DPA space.
@@ -185,13 +214,14 @@ carved into an arbitrary number of BLK devices with discontiguous
 extents.
 
 BLK-REGIONs, PMEM-REGIONs, Atomic Sectors, and DAX
---------------------------------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 One of the few
 reasons to allow multiple BLK namespaces per REGION is so that each
 BLK-namespace can be configured with a BTT with unique atomic sector
 sizes.  While a PMEM device can host a BTT the LABEL specification does
 not provide for a sector size to be specified for a PMEM namespace.
+
 This is due to the expectation that the primary usage model for PMEM is
 via DAX, and the BTT is incompatible with DAX.  However, for the cases
 where an application or filesystem still needs atomic sector update
@@ -200,52 +230,52 @@ LIBNVDIMM/NDCTL: Block Translation Table "btt"
 
 
 Example NVDIMM Platform
------------------------
+=======================
 
 For the remainder of this document the following diagram will be
-referenced for any example sysfs layouts.
+referenced for any example sysfs layouts::
 
 
-                             (a)               (b)           DIMM   BLK-REGION
-          +-------------------+--------+--------+--------+
-+------+  |       pm0.0       | blk2.0 | pm1.0  | blk2.1 |    0      region2
-| imc0 +--+- - - region0- - - +--------+        +--------+
-+--+---+  |       pm0.0       | blk3.0 | pm1.0  | blk3.1 |    1      region3
-   |      +-------------------+--------v        v--------+
-+--+---+                               |                 |
-| cpu0 |                                     region1
-+--+---+                               |                 |
-   |      +----------------------------^        ^--------+
-+--+---+  |           blk4.0           | pm1.0  | blk4.0 |    2      region4
-| imc1 +--+----------------------------|        +--------+
-+------+  |           blk5.0           | pm1.0  | blk5.0 |    3      region5
-          +----------------------------+--------+--------+
+                               (a)               (b)           DIMM   BLK-REGION
+            +-------------------+--------+--------+--------+
+  +------+  |       pm0.0       | blk2.0 | pm1.0  | blk2.1 |    0      region2
+  | imc0 +--+- - - region0- - - +--------+        +--------+
+  +--+---+  |       pm0.0       | blk3.0 | pm1.0  | blk3.1 |    1      region3
+     |      +-------------------+--------v        v--------+
+  +--+---+                               |                 |
+  | cpu0 |                                     region1
+  +--+---+                               |                 |
+     |      +----------------------------^        ^--------+
+  +--+---+  |           blk4.0           | pm1.0  | blk4.0 |    2      region4
+  | imc1 +--+----------------------------|        +--------+
+  +------+  |           blk5.0           | pm1.0  | blk5.0 |    3      region5
+            +----------------------------+--------+--------+
 
 In this platform we have four DIMMs and two memory controllers in one
 socket.  Each unique interface (BLK or PMEM) to DPA space is identified
 by a region device with a dynamically assigned id (REGION0 - REGION5).
 
     1. The first portion of DIMM0 and DIMM1 are interleaved as REGION0. A
-    single PMEM namespace is created in the REGION0-SPA-range that spans most
-    of DIMM0 and DIMM1 with a user-specified name of "pm0.0". Some of that
-    interleaved system-physical-address range is reclaimed as BLK-aperture
-    accessed space starting at DPA-offset (a) into each DIMM.  In that
-    reclaimed space we create two BLK-aperture "namespaces" from REGION2 and
-    REGION3 where "blk2.0" and "blk3.0" are just human readable names that
-    could be set to any user-desired name in the LABEL.
+       single PMEM namespace is created in the REGION0-SPA-range that spans most
+       of DIMM0 and DIMM1 with a user-specified name of "pm0.0". Some of that
+       interleaved system-physical-address range is reclaimed as BLK-aperture
+       accessed space starting at DPA-offset (a) into each DIMM.  In that
+       reclaimed space we create two BLK-aperture "namespaces" from REGION2 and
+       REGION3 where "blk2.0" and "blk3.0" are just human readable names that
+       could be set to any user-desired name in the LABEL.
 
     2. In the last portion of DIMM0 and DIMM1 we have an interleaved
-    system-physical-address range, REGION1, that spans those two DIMMs as
-    well as DIMM2 and DIMM3.  Some of REGION1 is allocated to a PMEM namespace
-    named "pm1.0", the rest is reclaimed in 4 BLK-aperture namespaces (for
-    each DIMM in the interleave set), "blk2.1", "blk3.1", "blk4.0", and
-    "blk5.0".
+       system-physical-address range, REGION1, that spans those two DIMMs as
+       well as DIMM2 and DIMM3.  Some of REGION1 is allocated to a PMEM namespace
+       named "pm1.0", the rest is reclaimed in 4 BLK-aperture namespaces (for
+       each DIMM in the interleave set), "blk2.1", "blk3.1", "blk4.0", and
+       "blk5.0".
 
     3. The portion of DIMM2 and DIMM3 that do not participate in the REGION1
-    interleaved system-physical-address range (i.e. the DPA address past
-    offset (b) are also included in the "blk4.0" and "blk5.0" namespaces.
-    Note, that this example shows that BLK-aperture namespaces don't need to
-    be contiguous in DPA-space.
+       interleaved system-physical-address range (i.e. the DPA address past
+       offset (b) are also included in the "blk4.0" and "blk5.0" namespaces.
+       Note, that this example shows that BLK-aperture namespaces don't need to
+       be contiguous in DPA-space.
 
     This bus is provided by the kernel under the device
     /sys/devices/platform/nfit_test.0 when CONFIG_NFIT_TEST is enabled and
@@ -254,7 +284,7 @@ by a region device with a dynamically assigned id (REGION0 - REGION5).
 
 
 LIBNVDIMM Kernel Device Model and LIBNDCTL Userspace API
-----------------------------------------------------
+========================================================
 
 What follows is a description of the LIBNVDIMM sysfs layout and a
 corresponding object hierarchy diagram as viewed through the LIBNDCTL
@@ -263,12 +293,18 @@ NVDIMM Platform which is also the LIBNVDIMM bus used in the LIBNDCTL unit
 test.
 
 LIBNDCTL: Context
+-----------------
+
 Every API call in the LIBNDCTL library requires a context that holds the
 logging parameters and other library instance state.  The library is
 based on the libabc template:
-https://git.kernel.org/cgit/linux/kernel/git/kay/libabc.git
+
+	https://git.kernel.org/cgit/linux/kernel/git/kay/libabc.git
 
 LIBNDCTL: instantiate a new library context example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+::
 
 	struct ndctl_ctx *ctx;
 
@@ -278,7 +314,7 @@ LIBNDCTL: instantiate a new library context example
 		return NULL;
 
 LIBNVDIMM/LIBNDCTL: Bus
--------------------
+-----------------------
 
 A bus has a 1:1 relationship with an NFIT.  The current expectation for
 ACPI based systems is that there is only ever one platform-global NFIT.
@@ -288,9 +324,10 @@ we we use this capability to test multiple NFIT configurations in the
 unit test.
 
 LIBNVDIMM: control class device in /sys/class
+---------------------------------------------
 
 This character device accepts DSM messages to be passed to DIMM
-identified by its NFIT handle.
+identified by its NFIT handle::
 
 	/sys/class/nd/ndctl0
 	|-- dev
@@ -300,10 +337,15 @@ identified by its NFIT handle.
 
 
 LIBNVDIMM: bus
+--------------
+
+::
 
 	struct nvdimm_bus *nvdimm_bus_register(struct device *parent,
 	       struct nvdimm_bus_descriptor *nfit_desc);
 
+::
+
 	/sys/devices/platform/nfit_test.0/ndbus0
 	|-- commands
 	|-- nd
@@ -324,7 +366,9 @@ LIBNVDIMM: bus
 	`-- wait_probe
 
 LIBNDCTL: bus enumeration example
-Find the bus handle that describes the bus from Example NVDIMM Platform
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Find the bus handle that describes the bus from Example NVDIMM Platform::
 
 	static struct ndctl_bus *get_bus_by_provider(struct ndctl_ctx *ctx,
 			const char *provider)
@@ -342,7 +386,7 @@ Find the bus handle that describes the bus from Example NVDIMM Platform
 
 
 LIBNVDIMM/LIBNDCTL: DIMM (NMEM)
----------------------------
+-------------------------------
 
 The DIMM device provides a character device for sending commands to
 hardware, and it is a container for LABELs.  If the DIMM is defined by
@@ -355,11 +399,16 @@ Range Mapping Structure", and there is no requirement that they actually
 be physical DIMMs, so we use a more generic name.
 
 LIBNVDIMM: DIMM (NMEM)
+^^^^^^^^^^^^^^^^^^^^^^
+
+::
 
 	struct nvdimm *nvdimm_create(struct nvdimm_bus *nvdimm_bus, void *provider_data,
 			const struct attribute_group **groups, unsigned long flags,
 			unsigned long *dsm_mask);
 
+::
+
 	/sys/devices/platform/nfit_test.0/ndbus0
 	|-- nmem0
 	|   |-- available_slots
@@ -384,15 +433,20 @@ LIBNVDIMM: DIMM (NMEM)
 
 
 LIBNDCTL: DIMM enumeration example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Note, in this example we are assuming NFIT-defined DIMMs which are
 identified by an "nfit_handle" a 32-bit value where:
-Bit 3:0 DIMM number within the memory channel
-Bit 7:4 memory channel number
-Bit 11:8 memory controller ID
-Bit 15:12 socket ID (within scope of a Node controller if node controller is present)
-Bit 27:16 Node Controller ID
-Bit 31:28 Reserved
+
+   - Bit 3:0 DIMM number within the memory channel
+   - Bit 7:4 memory channel number
+   - Bit 11:8 memory controller ID
+   - Bit 15:12 socket ID (within scope of a Node controller if node
+     controller is present)
+   - Bit 27:16 Node Controller ID
+   - Bit 31:28 Reserved
+
+::
 
 	static struct ndctl_dimm *get_dimm_by_handle(struct ndctl_bus *bus,
 	       unsigned int handle)
@@ -413,7 +467,7 @@ Bit 31:28 Reserved
 	dimm = get_dimm_by_handle(bus, DIMM_HANDLE(0, 0, 0, 0, 0));
 
 LIBNVDIMM/LIBNDCTL: Region
-----------------------
+--------------------------
 
 A generic REGION device is registered for each PMEM range or BLK-aperture
 set.  Per the example there are 6 regions: 2 PMEM and 4 BLK-aperture
@@ -435,13 +489,15 @@ emits, "devtype" duplicates the DEVTYPE variable stored by udev at the
 at the 'add' event, and finally, the optional "spa_index" is provided in
 the case where the region is defined by a SPA.
 
-LIBNVDIMM: region
+LIBNVDIMM: region::
 
 	struct nd_region *nvdimm_pmem_region_create(struct nvdimm_bus *nvdimm_bus,
 			struct nd_region_desc *ndr_desc);
 	struct nd_region *nvdimm_blk_region_create(struct nvdimm_bus *nvdimm_bus,
 			struct nd_region_desc *ndr_desc);
 
+::
+
 	/sys/devices/platform/nfit_test.0/ndbus0
 	|-- region0
 	|   |-- available_size
@@ -468,10 +524,11 @@ LIBNVDIMM: region
 	[..]
 
 LIBNDCTL: region enumeration example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Sample region retrieval routines based on NFIT-unique data like
 "spa_index" (interleave set id) for PMEM and "nfit_handle" (dimm id) for
-BLK.
+BLK::
 
 	static struct ndctl_region *get_pmem_region_by_spa_index(struct ndctl_bus *bus,
 			unsigned int spa_index)
@@ -518,33 +575,33 @@ REGION name generic and expects userspace to always consider the
 region-attributes for four reasons:
 
     1. There are already more than two REGION and "namespace" types.  For
-    PMEM there are two subtypes.  As mentioned previously we have PMEM where
-    the constituent DIMM devices are known and anonymous PMEM.  For BLK
-    regions the NFIT specification already anticipates vendor specific
-    implementations.  The exact distinction of what a region contains is in
-    the region-attributes not the region-name or the region-devtype.
+       PMEM there are two subtypes.  As mentioned previously we have PMEM where
+       the constituent DIMM devices are known and anonymous PMEM.  For BLK
+       regions the NFIT specification already anticipates vendor specific
+       implementations.  The exact distinction of what a region contains is in
+       the region-attributes not the region-name or the region-devtype.
 
     2. A region with zero child-namespaces is a possible configuration.  For
-    example, the NFIT allows for a DCR to be published without a
-    corresponding BLK-aperture.  This equates to a DIMM that can only accept
-    control/configuration messages, but no i/o through a descendant block
-    device.  Again, this "type" is advertised in the attributes ('mappings'
-    == 0) and the name does not tell you much.
+       example, the NFIT allows for a DCR to be published without a
+       corresponding BLK-aperture.  This equates to a DIMM that can only accept
+       control/configuration messages, but no i/o through a descendant block
+       device.  Again, this "type" is advertised in the attributes ('mappings'
+       == 0) and the name does not tell you much.
 
     3. What if a third major interface type arises in the future?  Outside
-    of vendor specific implementations, it's not difficult to envision a
-    third class of interface type beyond BLK and PMEM.  With a generic name
-    for the REGION level of the device-hierarchy old userspace
-    implementations can still make sense of new kernel advertised
-    region-types.  Userspace can always rely on the generic region
-    attributes like "mappings", "size", etc and the expected child devices
-    named "namespace".  This generic format of the device-model hierarchy
-    allows the LIBNVDIMM and LIBNDCTL implementations to be more uniform and
-    future-proof.
+       of vendor specific implementations, it's not difficult to envision a
+       third class of interface type beyond BLK and PMEM.  With a generic name
+       for the REGION level of the device-hierarchy old userspace
+       implementations can still make sense of new kernel advertised
+       region-types.  Userspace can always rely on the generic region
+       attributes like "mappings", "size", etc and the expected child devices
+       named "namespace".  This generic format of the device-model hierarchy
+       allows the LIBNVDIMM and LIBNDCTL implementations to be more uniform and
+       future-proof.
 
     4. There are more robust mechanisms for determining the major type of a
-    region than a device name.  See the next section, How Do I Determine the
-    Major Type of a Region?
+       region than a device name.  See the next section, How Do I Determine the
+       Major Type of a Region?
 
 How Do I Determine the Major Type of a Region?
 ----------------------------------------------
@@ -553,7 +610,8 @@ Outside of the blanket recommendation of "use libndctl", or simply
 looking at the kernel header (/usr/include/linux/ndctl.h) to decode the
 "nstype" integer attribute, here are some other options.
 
-    1. module alias lookup:
+1. module alias lookup
+^^^^^^^^^^^^^^^^^^^^^^
 
     The whole point of region/namespace device type differentiation is to
     decide which block-device driver will attach to a given LIBNVDIMM namespace.
@@ -569,28 +627,31 @@ looking at the kernel header (/usr/include/linux/ndctl.h) to decode the
     the resulting namespaces.  The output from module resolution is more
     accurate than a region-name or region-devtype.
 
-    2. udev:
+2. udev
+^^^^^^^
 
-    The kernel "devtype" is registered in the udev database
-    # udevadm info --path=/devices/platform/nfit_test.0/ndbus0/region0
-    P: /devices/platform/nfit_test.0/ndbus0/region0
-    E: DEVPATH=/devices/platform/nfit_test.0/ndbus0/region0
-    E: DEVTYPE=nd_pmem
-    E: MODALIAS=nd:t2
-    E: SUBSYSTEM=nd
+    The kernel "devtype" is registered in the udev database::
 
-    # udevadm info --path=/devices/platform/nfit_test.0/ndbus0/region4
-    P: /devices/platform/nfit_test.0/ndbus0/region4
-    E: DEVPATH=/devices/platform/nfit_test.0/ndbus0/region4
-    E: DEVTYPE=nd_blk
-    E: MODALIAS=nd:t3
-    E: SUBSYSTEM=nd
+	# udevadm info --path=/devices/platform/nfit_test.0/ndbus0/region0
+	P: /devices/platform/nfit_test.0/ndbus0/region0
+	E: DEVPATH=/devices/platform/nfit_test.0/ndbus0/region0
+	E: DEVTYPE=nd_pmem
+	E: MODALIAS=nd:t2
+	E: SUBSYSTEM=nd
+
+	# udevadm info --path=/devices/platform/nfit_test.0/ndbus0/region4
+	P: /devices/platform/nfit_test.0/ndbus0/region4
+	E: DEVPATH=/devices/platform/nfit_test.0/ndbus0/region4
+	E: DEVTYPE=nd_blk
+	E: MODALIAS=nd:t3
+	E: SUBSYSTEM=nd
 
     ...and is available as a region attribute, but keep in mind that the
     "devtype" does not indicate sub-type variations and scripts should
     really be understanding the other attributes.
 
-    3. type specific attributes:
+3. type specific attributes
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
     As it currently stands a BLK-aperture region will never have a
     "nfit/spa_index" attribute, but neither will a non-NFIT PMEM region.  A
@@ -600,7 +661,7 @@ looking at the kernel header (/usr/include/linux/ndctl.h) to decode the
 
 
 LIBNVDIMM/LIBNDCTL: Namespace
--------------------------
+-----------------------------
 
 A REGION, after resolving DPA aliasing and LABEL specified boundaries,
 surfaces one or more "namespace" devices.  The arrival of a "namespace"
@@ -608,12 +669,14 @@ device currently triggers either the nd_blk or nd_pmem driver to load
 and register a disk/block device.
 
 LIBNVDIMM: namespace
+^^^^^^^^^^^^^^^^^^^^
+
 Here is a sample layout from the three major types of NAMESPACE where
 namespace0.0 represents DIMM-info-backed PMEM (note that it has a 'uuid'
 attribute), namespace2.0 represents a BLK namespace (note it has a
 'sector_size' attribute) that, and namespace6.0 represents an anonymous
 PMEM namespace (note that has no 'uuid' attribute due to not support a
-LABEL).
+LABEL)::
 
 	/sys/devices/platform/nfit_test.0/ndbus0/region0/namespace0.0
 	|-- alt_name
@@ -656,76 +719,84 @@ LABEL).
 	`-- uevent
 
 LIBNDCTL: namespace enumeration example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Namespaces are indexed relative to their parent region, example below.
 These indexes are mostly static from boot to boot, but subsystem makes
 no guarantees in this regard.  For a static namespace identifier use its
 'uuid' attribute.
 
-static struct ndctl_namespace *get_namespace_by_id(struct ndctl_region *region,
-                unsigned int id)
-{
-        struct ndctl_namespace *ndns;
+::
 
-        ndctl_namespace_foreach(region, ndns)
-                if (ndctl_namespace_get_id(ndns) == id)
-                        return ndns;
+  static struct ndctl_namespace
+  *get_namespace_by_id(struct ndctl_region *region, unsigned int id)
+  {
+          struct ndctl_namespace *ndns;
 
-        return NULL;
-}
+          ndctl_namespace_foreach(region, ndns)
+                  if (ndctl_namespace_get_id(ndns) == id)
+                          return ndns;
+
+          return NULL;
+  }
 
 LIBNDCTL: namespace creation example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
 Idle namespaces are automatically created by the kernel if a given
 region has enough available capacity to create a new namespace.
 Namespace instantiation involves finding an idle namespace and
 configuring it.  For the most part the setting of namespace attributes
 can occur in any order, the only constraint is that 'uuid' must be set
 before 'size'.  This enables the kernel to track DPA allocations
-internally with a static identifier.
+internally with a static identifier::
 
-static int configure_namespace(struct ndctl_region *region,
-                struct ndctl_namespace *ndns,
-                struct namespace_parameters *parameters)
-{
-        char devname[50];
+  static int configure_namespace(struct ndctl_region *region,
+                  struct ndctl_namespace *ndns,
+                  struct namespace_parameters *parameters)
+  {
+          char devname[50];
 
-        snprintf(devname, sizeof(devname), "namespace%d.%d",
-                        ndctl_region_get_id(region), paramaters->id);
+          snprintf(devname, sizeof(devname), "namespace%d.%d",
+                          ndctl_region_get_id(region), paramaters->id);
 
-        ndctl_namespace_set_alt_name(ndns, devname);
-        /* 'uuid' must be set prior to setting size! */
-        ndctl_namespace_set_uuid(ndns, paramaters->uuid);
-        ndctl_namespace_set_size(ndns, paramaters->size);
-        /* unlike pmem namespaces, blk namespaces have a sector size */
-        if (parameters->lbasize)
-                ndctl_namespace_set_sector_size(ndns, parameters->lbasize);
-        ndctl_namespace_enable(ndns);
-}
+          ndctl_namespace_set_alt_name(ndns, devname);
+          /* 'uuid' must be set prior to setting size! */
+          ndctl_namespace_set_uuid(ndns, paramaters->uuid);
+          ndctl_namespace_set_size(ndns, paramaters->size);
+          /* unlike pmem namespaces, blk namespaces have a sector size */
+          if (parameters->lbasize)
+                  ndctl_namespace_set_sector_size(ndns, parameters->lbasize);
+          ndctl_namespace_enable(ndns);
+  }
 
 
 Why the Term "namespace"?
+^^^^^^^^^^^^^^^^^^^^^^^^^
 
     1. Why not "volume" for instance?  "volume" ran the risk of confusing
-    ND (libnvdimm subsystem) to a volume manager like device-mapper.
+       ND (libnvdimm subsystem) to a volume manager like device-mapper.
 
     2. The term originated to describe the sub-devices that can be created
-    within a NVME controller (see the nvme specification:
-    http://www.nvmexpress.org/specifications/), and NFIT namespaces are
-    meant to parallel the capabilities and configurability of
-    NVME-namespaces.
+       within a NVME controller (see the nvme specification:
+       http://www.nvmexpress.org/specifications/), and NFIT namespaces are
+       meant to parallel the capabilities and configurability of
+       NVME-namespaces.
 
 
 LIBNVDIMM/LIBNDCTL: Block Translation Table "btt"
----------------------------------------------
+-------------------------------------------------
 
 A BTT (design document: http://pmem.io/2014/09/23/btt.html) is a stacked
 block device driver that fronts either the whole block device or a
 partition of a block device emitted by either a PMEM or BLK NAMESPACE.
 
 LIBNVDIMM: btt layout
+^^^^^^^^^^^^^^^^^^^^^
+
 Every region will start out with at least one BTT device which is the
 seed device.  To activate it set the "namespace", "uuid", and
 "sector_size" attributes and then bind the device to the nd_pmem or
-nd_blk driver depending on the region type.
+nd_blk driver depending on the region type::
 
 	/sys/devices/platform/nfit_test.1/ndbus0/region0/btt0/
 	|-- namespace
@@ -739,10 +810,12 @@ nd_blk driver depending on the region type.
 	`-- uuid
 
 LIBNDCTL: btt creation example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
 Similar to namespaces an idle BTT device is automatically created per
 region.  Each time this "seed" btt device is configured and enabled a new
 seed is created.  Creating a BTT configuration involves two steps of
-finding and idle BTT and assigning it to consume a PMEM or BLK namespace.
+finding and idle BTT and assigning it to consume a PMEM or BLK namespace::
 
 	static struct ndctl_btt *get_idle_btt(struct ndctl_region *region)
 	{
@@ -787,29 +860,30 @@ Summary LIBNDCTL Diagram
 ------------------------
 
 For the given example above, here is the view of the objects as seen by the
-LIBNDCTL API:
-            +---+
-            |CTX|    +---------+   +--------------+  +---------------+
-            +-+-+  +-> REGION0 +---> NAMESPACE0.0 +--> PMEM8 "pm0.0" |
-              |    | +---------+   +--------------+  +---------------+
-+-------+     |    | +---------+   +--------------+  +---------------+
-| DIMM0 <-+   |    +-> REGION1 +---> NAMESPACE1.0 +--> PMEM6 "pm1.0" |
-+-------+ |   |    | +---------+   +--------------+  +---------------+
-| DIMM1 <-+ +-v--+ | +---------+   +--------------+  +---------------+
-+-------+ +-+BUS0+---> REGION2 +-+-> NAMESPACE2.0 +--> ND6  "blk2.0" |
-| DIMM2 <-+ +----+ | +---------+ | +--------------+  +----------------------+
-+-------+ |        |             +-> NAMESPACE2.1 +--> ND5  "blk2.1" | BTT2 |
-| DIMM3 <-+        |               +--------------+  +----------------------+
-+-------+          | +---------+   +--------------+  +---------------+
-                   +-> REGION3 +-+-> NAMESPACE3.0 +--> ND4  "blk3.0" |
-                   | +---------+ | +--------------+  +----------------------+
-                   |             +-> NAMESPACE3.1 +--> ND3  "blk3.1" | BTT1 |
-                   |               +--------------+  +----------------------+
-                   | +---------+   +--------------+  +---------------+
-                   +-> REGION4 +---> NAMESPACE4.0 +--> ND2  "blk4.0" |
-                   | +---------+   +--------------+  +---------------+
-                   | +---------+   +--------------+  +----------------------+
-                   +-> REGION5 +---> NAMESPACE5.0 +--> ND1  "blk5.0" | BTT0 |
-                     +---------+   +--------------+  +---------------+------+
+LIBNDCTL API::
+
+              +---+
+              |CTX|    +---------+   +--------------+  +---------------+
+              +-+-+  +-> REGION0 +---> NAMESPACE0.0 +--> PMEM8 "pm0.0" |
+                |    | +---------+   +--------------+  +---------------+
+  +-------+     |    | +---------+   +--------------+  +---------------+
+  | DIMM0 <-+   |    +-> REGION1 +---> NAMESPACE1.0 +--> PMEM6 "pm1.0" |
+  +-------+ |   |    | +---------+   +--------------+  +---------------+
+  | DIMM1 <-+ +-v--+ | +---------+   +--------------+  +---------------+
+  +-------+ +-+BUS0+---> REGION2 +-+-> NAMESPACE2.0 +--> ND6  "blk2.0" |
+  | DIMM2 <-+ +----+ | +---------+ | +--------------+  +----------------------+
+  +-------+ |        |             +-> NAMESPACE2.1 +--> ND5  "blk2.1" | BTT2 |
+  | DIMM3 <-+        |               +--------------+  +----------------------+
+  +-------+          | +---------+   +--------------+  +---------------+
+                     +-> REGION3 +-+-> NAMESPACE3.0 +--> ND4  "blk3.0" |
+                     | +---------+ | +--------------+  +----------------------+
+                     |             +-> NAMESPACE3.1 +--> ND3  "blk3.1" | BTT1 |
+                     |               +--------------+  +----------------------+
+                     | +---------+   +--------------+  +---------------+
+                     +-> REGION4 +---> NAMESPACE4.0 +--> ND2  "blk4.0" |
+                     | +---------+   +--------------+  +---------------+
+                     | +---------+   +--------------+  +----------------------+
+                     +-> REGION5 +---> NAMESPACE5.0 +--> ND1  "blk5.0" | BTT0 |
+                       +---------+   +--------------+  +---------------+------+
 
 
diff --git a/Documentation/nvdimm/security.txt b/Documentation/nvdimm/security.rst
similarity index 99%
rename from Documentation/nvdimm/security.txt
rename to Documentation/nvdimm/security.rst
index 4c36c05ca98e..ad9dea099b34 100644
--- a/Documentation/nvdimm/security.txt
+++ b/Documentation/nvdimm/security.rst
@@ -1,4 +1,5 @@
-NVDIMM SECURITY
+===============
+NVDIMM Security
 ===============
 
 1. Introduction
@@ -138,4 +139,5 @@ This command is only available when the master security is enabled, indicated
 by the extended security status.
 
 [1]: http://pmem.io/documents/NVDIMM_DSM_Interface-V1.8.pdf
+
 [2]: http://www.t13.org/documents/UploadedDocuments/docs2006/e05179r4-ACS-SecurityClarifications.pdf
diff --git a/drivers/nvdimm/Kconfig b/drivers/nvdimm/Kconfig
index 5e27918e4624..3ff6a22173fe 100644
--- a/drivers/nvdimm/Kconfig
+++ b/drivers/nvdimm/Kconfig
@@ -32,7 +32,7 @@ config BLK_DEV_PMEM
 	  Documentation/admin-guide/kernel-parameters.rst).  This driver converts
 	  these persistent memory ranges into block devices that are
 	  capable of DAX (direct-access) file system mappings.  See
-	  Documentation/nvdimm/nvdimm.txt for more details.
+	  Documentation/nvdimm/nvdimm.rst for more details.
 
 	  Say Y if you want to use an NVDIMM
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 71/79] docs: xtensa: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (66 preceding siblings ...)
  2019-04-22 13:27   ` [PATCH v2 70/79] docs: nvdimm: " Mauro Carvalho Chehab
@ 2019-04-22 13:28   ` Mauro Carvalho Chehab
  2019-04-22 13:28   ` [PATCH v2 72/79] docs: mmc: " Mauro Carvalho Chehab
                     ` (9 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:28 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Chris Zankel, Max Filippov, linux-xtensa

Rename the xtensa documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../xtensa/{atomctl.txt => atomctl.rst}       |  13 +-
 .../xtensa/{booting.txt => booting.rst}       |   5 +-
 Documentation/xtensa/index.rst                |  12 ++
 Documentation/xtensa/mmu.rst                  | 195 ++++++++++++++++++
 Documentation/xtensa/mmu.txt                  | 189 -----------------
 arch/xtensa/include/asm/initialize_mmu.h      |   2 +-
 6 files changed, 222 insertions(+), 194 deletions(-)
 rename Documentation/xtensa/{atomctl.txt => atomctl.rst} (81%)
 rename Documentation/xtensa/{booting.txt => booting.rst} (91%)
 create mode 100644 Documentation/xtensa/index.rst
 create mode 100644 Documentation/xtensa/mmu.rst
 delete mode 100644 Documentation/xtensa/mmu.txt

diff --git a/Documentation/xtensa/atomctl.txt b/Documentation/xtensa/atomctl.rst
similarity index 81%
rename from Documentation/xtensa/atomctl.txt
rename to Documentation/xtensa/atomctl.rst
index 1da783ac200c..1ecbd0ba9a2e 100644
--- a/Documentation/xtensa/atomctl.txt
+++ b/Documentation/xtensa/atomctl.rst
@@ -1,3 +1,7 @@
+===========================================
+Atomic Operation Control (ATOMCTL) Register
+===========================================
+
 We Have Atomic Operation Control (ATOMCTL) Register.
 This register determines the effect of using a S32C1I instruction
 with various combinations of:
@@ -8,7 +12,7 @@ with various combinations of:
      2. With and without An Intelligent Memory Controller which
         can do Atomic Transactions itself.
 
-The Core comes up with a default value of for the three types of cache ops:
+The Core comes up with a default value of for the three types of cache ops::
 
       0x28: (WB: Internal, WT: Internal, BY:Exception)
 
@@ -30,15 +34,18 @@ CUSTOMER-WARNING:
 Developers might find using RCW in Bypass mode convenient when testing
 with the cache being bypassed; for example studying cache alias problems.
 
-See Section 4.3.12.4 of ISA; Bits:
+See Section 4.3.12.4 of ISA; Bits::
 
                              WB     WT      BY
                            5   4 | 3   2 | 1   0
+
+=========    ==================      ==================      ===============
   2 Bit
   Field
   Values     WB - Write Back         WT - Write Thru         BY - Bypass
----------    ---------------         -----------------     ----------------
+=========    ==================      ==================      ===============
     0        Exception               Exception               Exception
     1        RCW Transaction         RCW Transaction         RCW Transaction
     2        Internal Operation      Internal Operation      Reserved
     3        Reserved                Reserved                Reserved
+=========    ==================      ==================      ===============
diff --git a/Documentation/xtensa/booting.txt b/Documentation/xtensa/booting.rst
similarity index 91%
rename from Documentation/xtensa/booting.txt
rename to Documentation/xtensa/booting.rst
index 402b33a2619f..e1b83707e5b6 100644
--- a/Documentation/xtensa/booting.txt
+++ b/Documentation/xtensa/booting.rst
@@ -1,10 +1,13 @@
-Passing boot parameters to the kernel.
+=====================================
+Passing boot parameters to the kernel
+=====================================
 
 Boot parameters are represented as a TLV list in the memory. Please see
 arch/xtensa/include/asm/bootparam.h for definition of the bp_tag structure and
 tag value constants. First entry in the list must have type BP_TAG_FIRST, last
 entry must have type BP_TAG_LAST. The address of the first list entry is
 passed to the kernel in the register a2. The address type depends on MMU type:
+
 - For configurations without MMU, with region protection or with MPU the
   address must be the physical address.
 - For configurations with region translarion MMU or with MMUv3 and CONFIG_MMU=n
diff --git a/Documentation/xtensa/index.rst b/Documentation/xtensa/index.rst
new file mode 100644
index 000000000000..5a24e365e35f
--- /dev/null
+++ b/Documentation/xtensa/index.rst
@@ -0,0 +1,12 @@
+:orphan:
+
+===================
+Xtensa Architecture
+===================
+
+.. toctree::
+   :maxdepth: 1
+
+   atomctl
+   booting
+   mmu
diff --git a/Documentation/xtensa/mmu.rst b/Documentation/xtensa/mmu.rst
new file mode 100644
index 000000000000..e52a12960fdc
--- /dev/null
+++ b/Documentation/xtensa/mmu.rst
@@ -0,0 +1,195 @@
+=============================
+MMUv3 initialization sequence
+=============================
+
+The code in the initialize_mmu macro sets up MMUv3 memory mapping
+identically to MMUv2 fixed memory mapping. Depending on
+CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX symbol this code is
+located in addresses it was linked for (symbol undefined), or not
+(symbol defined), so it needs to be position-independent.
+
+The code has the following assumptions:
+
+  - This code fragment is run only on an MMU v3.
+  - TLBs are in their reset state.
+  - ITLBCFG and DTLBCFG are zero (reset state).
+  - RASID is 0x04030201 (reset state).
+  - PS.RING is zero (reset state).
+  - LITBASE is zero (reset state, PC-relative literals); required to be PIC.
+
+TLB setup proceeds along the following steps.
+
+  Legend:
+
+    - VA = virtual address (two upper nibbles of it);
+    - PA = physical address (two upper nibbles of it);
+    - pc = physical range that contains this code;
+
+After step 2, we jump to virtual address in the range 0x40000000..0x5fffffff
+or 0x00000000..0x1fffffff, depending on whether the kernel was loaded below
+0x40000000 or above. That address corresponds to next instruction to execute
+in this code. After step 4, we jump to intended (linked) address of this code.
+The scheme below assumes that the kernel is loaded below 0x40000000.
+
+ ====== =====  =====  =====  =====   ====== =====  =====
+ -      Step0  Step1  Step2  Step3          Step4  Step5
+
+   VA      PA     PA     PA     PA     VA      PA     PA
+ ====== =====  =====  =====  =====   ====== =====  =====
+ E0..FF -> E0  -> E0  -> E0          F0..FF -> F0  -> F0
+ C0..DF -> C0  -> C0  -> C0          E0..EF -> F0  -> F0
+ A0..BF -> A0  -> A0  -> A0          D8..DF -> 00  -> 00
+ 80..9F -> 80  -> 80  -> 80          D0..D7 -> 00  -> 00
+ 60..7F -> 60  -> 60  -> 60
+ 40..5F -> 40         -> pc  -> pc   40..5F -> pc
+ 20..3F -> 20  -> 20  -> 20
+ 00..1F -> 00  -> 00  -> 00
+ ====== =====  =====  =====  =====   ====== =====  =====
+
+The default location of IO peripherals is above 0xf0000000. This may be changed
+using a "ranges" property in a device tree simple-bus node. See the Devicetree
+Specification, section 4.5 for details on the syntax and semantics of
+simple-bus nodes. The following limitations apply:
+
+1. Only top level simple-bus nodes are considered
+
+2. Only one (first) simple-bus node is considered
+
+3. Empty "ranges" properties are not supported
+
+4. Only the first triplet in the "ranges" property is considered
+
+5. The parent-bus-address value is rounded down to the nearest 256MB boundary
+
+6. The IO area covers the entire 256MB segment of parent-bus-address; the
+   "ranges" triplet length field is ignored
+
+
+MMUv3 address space layouts.
+============================
+
+Default MMUv2-compatible layout::
+
+                        Symbol                   VADDR       Size
+  +------------------+
+  | Userspace        |                           0x00000000  TASK_SIZE
+  +------------------+                           0x40000000
+  +------------------+
+  | Page table       |  XCHAL_PAGE_TABLE_VADDR   0x80000000  XCHAL_PAGE_TABLE_SIZE
+  +------------------+
+  | KASAN shadow map |  KASAN_SHADOW_START       0x80400000  KASAN_SHADOW_SIZE
+  +------------------+                           0x8e400000
+  +------------------+
+  | VMALLOC area     |  VMALLOC_START            0xc0000000  128MB - 64KB
+  +------------------+  VMALLOC_END
+  | Cache aliasing   |  TLBTEMP_BASE_1           0xc7ff0000  DCACHE_WAY_SIZE
+  | remap area 1     |
+  +------------------+
+  | Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
+  | remap area 2     |
+  +------------------+
+  +------------------+
+  | KMAP area        |  PKMAP_BASE                           PTRS_PER_PTE *
+  |                  |                                       DCACHE_N_COLORS *
+  |                  |                                       PAGE_SIZE
+  |                  |                                       (4MB * DCACHE_N_COLORS)
+  +------------------+
+  | Atomic KMAP area |  FIXADDR_START                        KM_TYPE_NR *
+  |                  |                                       NR_CPUS *
+  |                  |                                       DCACHE_N_COLORS *
+  |                  |                                       PAGE_SIZE
+  +------------------+  FIXADDR_TOP              0xcffff000
+  +------------------+
+  | Cached KSEG      |  XCHAL_KSEG_CACHED_VADDR  0xd0000000  128MB
+  +------------------+
+  | Uncached KSEG    |  XCHAL_KSEG_BYPASS_VADDR  0xd8000000  128MB
+  +------------------+
+  | Cached KIO       |  XCHAL_KIO_CACHED_VADDR   0xe0000000  256MB
+  +------------------+
+  | Uncached KIO     |  XCHAL_KIO_BYPASS_VADDR   0xf0000000  256MB
+  +------------------+
+
+
+256MB cached + 256MB uncached layout::
+
+                        Symbol                   VADDR       Size
+  +------------------+
+  | Userspace        |                           0x00000000  TASK_SIZE
+  +------------------+                           0x40000000
+  +------------------+
+  | Page table       |  XCHAL_PAGE_TABLE_VADDR   0x80000000  XCHAL_PAGE_TABLE_SIZE
+  +------------------+
+  | KASAN shadow map |  KASAN_SHADOW_START       0x80400000  KASAN_SHADOW_SIZE
+  +------------------+                           0x8e400000
+  +------------------+
+  | VMALLOC area     |  VMALLOC_START            0xa0000000  128MB - 64KB
+  +------------------+  VMALLOC_END
+  | Cache aliasing   |  TLBTEMP_BASE_1           0xa7ff0000  DCACHE_WAY_SIZE
+  | remap area 1     |
+  +------------------+
+  | Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
+  | remap area 2     |
+  +------------------+
+  +------------------+
+  | KMAP area        |  PKMAP_BASE                           PTRS_PER_PTE *
+  |                  |                                       DCACHE_N_COLORS *
+  |                  |                                       PAGE_SIZE
+  |                  |                                       (4MB * DCACHE_N_COLORS)
+  +------------------+
+  | Atomic KMAP area |  FIXADDR_START                        KM_TYPE_NR *
+  |                  |                                       NR_CPUS *
+  |                  |                                       DCACHE_N_COLORS *
+  |                  |                                       PAGE_SIZE
+  +------------------+  FIXADDR_TOP              0xaffff000
+  +------------------+
+  | Cached KSEG      |  XCHAL_KSEG_CACHED_VADDR  0xb0000000  256MB
+  +------------------+
+  | Uncached KSEG    |  XCHAL_KSEG_BYPASS_VADDR  0xc0000000  256MB
+  +------------------+
+  +------------------+
+  | Cached KIO       |  XCHAL_KIO_CACHED_VADDR   0xe0000000  256MB
+  +------------------+
+  | Uncached KIO     |  XCHAL_KIO_BYPASS_VADDR   0xf0000000  256MB
+  +------------------+
+
+
+512MB cached + 512MB uncached layout::
+
+                        Symbol                   VADDR       Size
+  +------------------+
+  | Userspace        |                           0x00000000  TASK_SIZE
+  +------------------+                           0x40000000
+  +------------------+
+  | Page table       |  XCHAL_PAGE_TABLE_VADDR   0x80000000  XCHAL_PAGE_TABLE_SIZE
+  +------------------+
+  | KASAN shadow map |  KASAN_SHADOW_START       0x80400000  KASAN_SHADOW_SIZE
+  +------------------+                           0x8e400000
+  +------------------+
+  | VMALLOC area     |  VMALLOC_START            0x90000000  128MB - 64KB
+  +------------------+  VMALLOC_END
+  | Cache aliasing   |  TLBTEMP_BASE_1           0x97ff0000  DCACHE_WAY_SIZE
+  | remap area 1     |
+  +------------------+
+  | Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
+  | remap area 2     |
+  +------------------+
+  +------------------+
+  | KMAP area        |  PKMAP_BASE                           PTRS_PER_PTE *
+  |                  |                                       DCACHE_N_COLORS *
+  |                  |                                       PAGE_SIZE
+  |                  |                                       (4MB * DCACHE_N_COLORS)
+  +------------------+
+  | Atomic KMAP area |  FIXADDR_START                        KM_TYPE_NR *
+  |                  |                                       NR_CPUS *
+  |                  |                                       DCACHE_N_COLORS *
+  |                  |                                       PAGE_SIZE
+  +------------------+  FIXADDR_TOP              0x9ffff000
+  +------------------+
+  | Cached KSEG      |  XCHAL_KSEG_CACHED_VADDR  0xa0000000  512MB
+  +------------------+
+  | Uncached KSEG    |  XCHAL_KSEG_BYPASS_VADDR  0xc0000000  512MB
+  +------------------+
+  | Cached KIO       |  XCHAL_KIO_CACHED_VADDR   0xe0000000  256MB
+  +------------------+
+  | Uncached KIO     |  XCHAL_KIO_BYPASS_VADDR   0xf0000000  256MB
+  +------------------+
diff --git a/Documentation/xtensa/mmu.txt b/Documentation/xtensa/mmu.txt
deleted file mode 100644
index 318114de63f3..000000000000
--- a/Documentation/xtensa/mmu.txt
+++ /dev/null
@@ -1,189 +0,0 @@
-MMUv3 initialization sequence.
-
-The code in the initialize_mmu macro sets up MMUv3 memory mapping
-identically to MMUv2 fixed memory mapping. Depending on
-CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX symbol this code is
-located in addresses it was linked for (symbol undefined), or not
-(symbol defined), so it needs to be position-independent.
-
-The code has the following assumptions:
-  This code fragment is run only on an MMU v3.
-  TLBs are in their reset state.
-  ITLBCFG and DTLBCFG are zero (reset state).
-  RASID is 0x04030201 (reset state).
-  PS.RING is zero (reset state).
-  LITBASE is zero (reset state, PC-relative literals); required to be PIC.
-
-TLB setup proceeds along the following steps.
-
-  Legend:
-    VA = virtual address (two upper nibbles of it);
-    PA = physical address (two upper nibbles of it);
-    pc = physical range that contains this code;
-
-After step 2, we jump to virtual address in the range 0x40000000..0x5fffffff
-or 0x00000000..0x1fffffff, depending on whether the kernel was loaded below
-0x40000000 or above. That address corresponds to next instruction to execute
-in this code. After step 4, we jump to intended (linked) address of this code.
-The scheme below assumes that the kernel is loaded below 0x40000000.
-
-        Step0  Step1  Step2  Step3          Step4  Step5
-        =====  =====  =====  =====          =====  =====
-   VA      PA     PA     PA     PA     VA      PA     PA
- ------    --     --     --     --   ------    --     --
- E0..FF -> E0  -> E0  -> E0          F0..FF -> F0  -> F0
- C0..DF -> C0  -> C0  -> C0          E0..EF -> F0  -> F0
- A0..BF -> A0  -> A0  -> A0          D8..DF -> 00  -> 00
- 80..9F -> 80  -> 80  -> 80          D0..D7 -> 00  -> 00
- 60..7F -> 60  -> 60  -> 60
- 40..5F -> 40         -> pc  -> pc   40..5F -> pc
- 20..3F -> 20  -> 20  -> 20
- 00..1F -> 00  -> 00  -> 00
-
-The default location of IO peripherals is above 0xf0000000. This may be changed
-using a "ranges" property in a device tree simple-bus node. See the Devicetree
-Specification, section 4.5 for details on the syntax and semantics of
-simple-bus nodes. The following limitations apply:
-
-1. Only top level simple-bus nodes are considered
-
-2. Only one (first) simple-bus node is considered
-
-3. Empty "ranges" properties are not supported
-
-4. Only the first triplet in the "ranges" property is considered
-
-5. The parent-bus-address value is rounded down to the nearest 256MB boundary
-
-6. The IO area covers the entire 256MB segment of parent-bus-address; the
-   "ranges" triplet length field is ignored
-
-
-MMUv3 address space layouts.
-============================
-
-Default MMUv2-compatible layout.
-
-                      Symbol                   VADDR       Size
-+------------------+
-| Userspace        |                           0x00000000  TASK_SIZE
-+------------------+                           0x40000000
-+------------------+
-| Page table       |  XCHAL_PAGE_TABLE_VADDR   0x80000000  XCHAL_PAGE_TABLE_SIZE
-+------------------+
-| KASAN shadow map |  KASAN_SHADOW_START       0x80400000  KASAN_SHADOW_SIZE
-+------------------+                           0x8e400000
-+------------------+
-| VMALLOC area     |  VMALLOC_START            0xc0000000  128MB - 64KB
-+------------------+  VMALLOC_END
-| Cache aliasing   |  TLBTEMP_BASE_1           0xc7ff0000  DCACHE_WAY_SIZE
-| remap area 1     |
-+------------------+
-| Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
-| remap area 2     |
-+------------------+
-+------------------+
-| KMAP area        |  PKMAP_BASE                           PTRS_PER_PTE *
-|                  |                                       DCACHE_N_COLORS *
-|                  |                                       PAGE_SIZE
-|                  |                                       (4MB * DCACHE_N_COLORS)
-+------------------+
-| Atomic KMAP area |  FIXADDR_START                        KM_TYPE_NR *
-|                  |                                       NR_CPUS *
-|                  |                                       DCACHE_N_COLORS *
-|                  |                                       PAGE_SIZE
-+------------------+  FIXADDR_TOP              0xcffff000
-+------------------+
-| Cached KSEG      |  XCHAL_KSEG_CACHED_VADDR  0xd0000000  128MB
-+------------------+
-| Uncached KSEG    |  XCHAL_KSEG_BYPASS_VADDR  0xd8000000  128MB
-+------------------+
-| Cached KIO       |  XCHAL_KIO_CACHED_VADDR   0xe0000000  256MB
-+------------------+
-| Uncached KIO     |  XCHAL_KIO_BYPASS_VADDR   0xf0000000  256MB
-+------------------+
-
-
-256MB cached + 256MB uncached layout.
-
-                      Symbol                   VADDR       Size
-+------------------+
-| Userspace        |                           0x00000000  TASK_SIZE
-+------------------+                           0x40000000
-+------------------+
-| Page table       |  XCHAL_PAGE_TABLE_VADDR   0x80000000  XCHAL_PAGE_TABLE_SIZE
-+------------------+
-| KASAN shadow map |  KASAN_SHADOW_START       0x80400000  KASAN_SHADOW_SIZE
-+------------------+                           0x8e400000
-+------------------+
-| VMALLOC area     |  VMALLOC_START            0xa0000000  128MB - 64KB
-+------------------+  VMALLOC_END
-| Cache aliasing   |  TLBTEMP_BASE_1           0xa7ff0000  DCACHE_WAY_SIZE
-| remap area 1     |
-+------------------+
-| Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
-| remap area 2     |
-+------------------+
-+------------------+
-| KMAP area        |  PKMAP_BASE                           PTRS_PER_PTE *
-|                  |                                       DCACHE_N_COLORS *
-|                  |                                       PAGE_SIZE
-|                  |                                       (4MB * DCACHE_N_COLORS)
-+------------------+
-| Atomic KMAP area |  FIXADDR_START                        KM_TYPE_NR *
-|                  |                                       NR_CPUS *
-|                  |                                       DCACHE_N_COLORS *
-|                  |                                       PAGE_SIZE
-+------------------+  FIXADDR_TOP              0xaffff000
-+------------------+
-| Cached KSEG      |  XCHAL_KSEG_CACHED_VADDR  0xb0000000  256MB
-+------------------+
-| Uncached KSEG    |  XCHAL_KSEG_BYPASS_VADDR  0xc0000000  256MB
-+------------------+
-+------------------+
-| Cached KIO       |  XCHAL_KIO_CACHED_VADDR   0xe0000000  256MB
-+------------------+
-| Uncached KIO     |  XCHAL_KIO_BYPASS_VADDR   0xf0000000  256MB
-+------------------+
-
-
-512MB cached + 512MB uncached layout.
-
-                      Symbol                   VADDR       Size
-+------------------+
-| Userspace        |                           0x00000000  TASK_SIZE
-+------------------+                           0x40000000
-+------------------+
-| Page table       |  XCHAL_PAGE_TABLE_VADDR   0x80000000  XCHAL_PAGE_TABLE_SIZE
-+------------------+
-| KASAN shadow map |  KASAN_SHADOW_START       0x80400000  KASAN_SHADOW_SIZE
-+------------------+                           0x8e400000
-+------------------+
-| VMALLOC area     |  VMALLOC_START            0x90000000  128MB - 64KB
-+------------------+  VMALLOC_END
-| Cache aliasing   |  TLBTEMP_BASE_1           0x97ff0000  DCACHE_WAY_SIZE
-| remap area 1     |
-+------------------+
-| Cache aliasing   |  TLBTEMP_BASE_2                       DCACHE_WAY_SIZE
-| remap area 2     |
-+------------------+
-+------------------+
-| KMAP area        |  PKMAP_BASE                           PTRS_PER_PTE *
-|                  |                                       DCACHE_N_COLORS *
-|                  |                                       PAGE_SIZE
-|                  |                                       (4MB * DCACHE_N_COLORS)
-+------------------+
-| Atomic KMAP area |  FIXADDR_START                        KM_TYPE_NR *
-|                  |                                       NR_CPUS *
-|                  |                                       DCACHE_N_COLORS *
-|                  |                                       PAGE_SIZE
-+------------------+  FIXADDR_TOP              0x9ffff000
-+------------------+
-| Cached KSEG      |  XCHAL_KSEG_CACHED_VADDR  0xa0000000  512MB
-+------------------+
-| Uncached KSEG    |  XCHAL_KSEG_BYPASS_VADDR  0xc0000000  512MB
-+------------------+
-| Cached KIO       |  XCHAL_KIO_CACHED_VADDR   0xe0000000  256MB
-+------------------+
-| Uncached KIO     |  XCHAL_KIO_BYPASS_VADDR   0xf0000000  256MB
-+------------------+
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index 10e9852b2fb4..f75f7f8fc93e 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -46,7 +46,7 @@
 #if XCHAL_HAVE_S32C1I && (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RC_2009_0)
 /*
  * We Have Atomic Operation Control (ATOMCTL) Register; Initialize it.
- * For details see Documentation/xtensa/atomctl.txt
+ * For details see Documentation/xtensa/atomctl.rst
  */
 #if XCHAL_DCACHE_IS_COHERENT
 	movi	a3, 0x25	/* For SMP/MX -- internal for writeback,
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 72/79] docs: mmc: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (67 preceding siblings ...)
  2019-04-22 13:28   ` [PATCH v2 71/79] docs: xtensa: " Mauro Carvalho Chehab
@ 2019-04-22 13:28   ` Mauro Carvalho Chehab
  2019-04-22 13:28   ` [PATCH v2 73/79] docs: sparc: " Mauro Carvalho Chehab
                     ` (8 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:28 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet

Rename the mmc documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/mmc/index.rst                   | 13 +++++
 .../{mmc-async-req.txt => mmc-async-req.rst}  | 53 +++++++++++--------
 .../{mmc-dev-attrs.txt => mmc-dev-attrs.rst}  | 32 +++++++----
 .../{mmc-dev-parts.txt => mmc-dev-parts.rst}  | 13 ++---
 .../mmc/{mmc-tools.txt => mmc-tools.rst}      |  5 +-
 5 files changed, 79 insertions(+), 37 deletions(-)
 create mode 100644 Documentation/mmc/index.rst
 rename Documentation/mmc/{mmc-async-req.txt => mmc-async-req.rst} (75%)
 rename Documentation/mmc/{mmc-dev-attrs.txt => mmc-dev-attrs.rst} (73%)
 rename Documentation/mmc/{mmc-dev-parts.txt => mmc-dev-parts.rst} (83%)
 rename Documentation/mmc/{mmc-tools.txt => mmc-tools.rst} (92%)

diff --git a/Documentation/mmc/index.rst b/Documentation/mmc/index.rst
new file mode 100644
index 000000000000..3305478ddadb
--- /dev/null
+++ b/Documentation/mmc/index.rst
@@ -0,0 +1,13 @@
+:orphan:
+
+========================
+MMC/SD/SDIO card support
+========================
+
+.. toctree::
+   :maxdepth: 1
+
+   mmc-dev-attrs
+   mmc-dev-parts
+   mmc-async-req
+   mmc-tools
diff --git a/Documentation/mmc/mmc-async-req.txt b/Documentation/mmc/mmc-async-req.rst
similarity index 75%
rename from Documentation/mmc/mmc-async-req.txt
rename to Documentation/mmc/mmc-async-req.rst
index ae1907b10e4a..0f7197c9c3b5 100644
--- a/Documentation/mmc/mmc-async-req.txt
+++ b/Documentation/mmc/mmc-async-req.rst
@@ -1,13 +1,20 @@
+========================
+MMC Asynchronous Request
+========================
+
 Rationale
 =========
 
 How significant is the cache maintenance overhead?
+
 It depends. Fast eMMC and multiple cache levels with speculative cache
 pre-fetch makes the cache overhead relatively significant. If the DMA
 preparations for the next request are done in parallel with the current
 transfer, the DMA preparation overhead would not affect the MMC performance.
+
 The intention of non-blocking (asynchronous) MMC requests is to minimize the
 time between when an MMC request ends and another MMC request begins.
+
 Using mmc_wait_for_req(), the MMC controller is idle while dma_map_sg and
 dma_unmap_sg are processing. Using non-blocking MMC requests makes it
 possible to prepare the caches for next job in parallel with an active
@@ -17,6 +24,7 @@ MMC block driver
 ================
 
 The mmc_blk_issue_rw_rq() in the MMC block driver is made non-blocking.
+
 The increase in throughput is proportional to the time it takes to
 prepare (major part of preparations are dma_map_sg() and dma_unmap_sg())
 a request and how fast the memory is. The faster the MMC/SD is the
@@ -35,6 +43,7 @@ MMC core API extension
 ======================
 
 There is one new public function mmc_start_req().
+
 It starts a new MMC command request for a host. The function isn't
 truly non-blocking. If there is an ongoing async request it waits
 for completion of that request and starts the new one and returns. It
@@ -47,6 +56,7 @@ MMC host extensions
 There are two optional members in the mmc_host_ops -- pre_req() and
 post_req() -- that the host driver may implement in order to move work
 to before and after the actual mmc_host_ops.request() function is called.
+
 In the DMA case pre_req() may do dma_map_sg() and prepare the DMA
 descriptor, and post_req() runs the dma_unmap_sg().
 
@@ -55,33 +65,34 @@ Optimize for the first request
 
 The first request in a series of requests can't be prepared in parallel
 with the previous transfer, since there is no previous request.
+
 The argument is_first_req in pre_req() indicates that there is no previous
 request. The host driver may optimize for this scenario to minimize
 the performance loss. A way to optimize for this is to split the current
 request in two chunks, prepare the first chunk and start the request,
 and finally prepare the second chunk and start the transfer.
 
-Pseudocode to handle is_first_req scenario with minimal prepare overhead:
+Pseudocode to handle is_first_req scenario with minimal prepare overhead::
 
-if (is_first_req && req->size > threshold)
-   /* start MMC transfer for the complete transfer size */
-   mmc_start_command(MMC_CMD_TRANSFER_FULL_SIZE);
+  if (is_first_req && req->size > threshold)
+     /* start MMC transfer for the complete transfer size */
+     mmc_start_command(MMC_CMD_TRANSFER_FULL_SIZE);
 
-   /*
-    * Begin to prepare DMA while cmd is being processed by MMC.
-    * The first chunk of the request should take the same time
-    * to prepare as the "MMC process command time".
-    * If prepare time exceeds MMC cmd time
-    * the transfer is delayed, guesstimate max 4k as first chunk size.
-    */
-    prepare_1st_chunk_for_dma(req);
-    /* flush pending desc to the DMAC (dmaengine.h) */
-    dma_issue_pending(req->dma_desc);
+     /*
+      * Begin to prepare DMA while cmd is being processed by MMC.
+      * The first chunk of the request should take the same time
+      * to prepare as the "MMC process command time".
+      * If prepare time exceeds MMC cmd time
+      * the transfer is delayed, guesstimate max 4k as first chunk size.
+      */
+      prepare_1st_chunk_for_dma(req);
+      /* flush pending desc to the DMAC (dmaengine.h) */
+      dma_issue_pending(req->dma_desc);
 
-    prepare_2nd_chunk_for_dma(req);
-    /*
-     * The second issue_pending should be called before MMC runs out
-     * of the first chunk. If the MMC runs out of the first data chunk
-     * before this call, the transfer is delayed.
-     */
-    dma_issue_pending(req->dma_desc);
+      prepare_2nd_chunk_for_dma(req);
+      /*
+       * The second issue_pending should be called before MMC runs out
+       * of the first chunk. If the MMC runs out of the first data chunk
+       * before this call, the transfer is delayed.
+       */
+      dma_issue_pending(req->dma_desc);
diff --git a/Documentation/mmc/mmc-dev-attrs.txt b/Documentation/mmc/mmc-dev-attrs.rst
similarity index 73%
rename from Documentation/mmc/mmc-dev-attrs.txt
rename to Documentation/mmc/mmc-dev-attrs.rst
index 4ad0bb17f343..4f44b1b730d6 100644
--- a/Documentation/mmc/mmc-dev-attrs.txt
+++ b/Documentation/mmc/mmc-dev-attrs.rst
@@ -1,3 +1,4 @@
+==================================
 SD and MMC Block Device Attributes
 ==================================
 
@@ -6,23 +7,29 @@ SD or MMC device.
 
 The following attributes are read/write.
 
-	force_ro		Enforce read-only access even if write protect switch is off.
+	========		===============================================
+	force_ro		Enforce read-only access even if write protect 					switch is off.
+	========		===============================================
 
 SD and MMC Device Attributes
 ============================
 
 All attributes are read-only.
 
+	======================	===============================================
 	cid			Card Identification Register
 	csd			Card Specific Data Register
 	scr			SD Card Configuration Register (SD only)
 	date			Manufacturing Date (from CID Register)
-	fwrev			Firmware/Product Revision (from CID Register) (SD and MMCv1 only)
-	hwrev			Hardware/Product Revision (from CID Register) (SD and MMCv1 only)
+	fwrev			Firmware/Product Revision (from CID Register)
+				(SD and MMCv1 only)
+	hwrev			Hardware/Product Revision (from CID Register)
+				(SD and MMCv1 only)
 	manfid			Manufacturer ID (from CID Register)
 	name			Product Name (from CID Register)
 	oemid			OEM/Application ID (from CID Register)
-	prv			Product Revision (from CID Register) (SD and MMCv4 only)
+	prv			Product Revision (from CID Register)
+				(SD and MMCv4 only)
 	serial			Product Serial Number (from CID Register)
 	erase_size		Erase group size
 	preferred_erase_size	Preferred erase size
@@ -30,7 +37,10 @@ All attributes are read-only.
 	rel_sectors		Reliable write sector count
 	ocr 			Operation Conditions Register
 	dsr			Driver Stage Register
-	cmdq_en			Command Queue enabled: 1 => enabled, 0 => not enabled
+	cmdq_en			Command Queue enabled:
+
+					1 => enabled, 0 => not enabled
+	======================	===============================================
 
 Note on Erase Size and Preferred Erase Size:
 
@@ -44,14 +54,15 @@ Note on Erase Size and Preferred Erase Size:
 	SD/MMC cards can erase an arbitrarily large area up to and
 	including the whole card.  When erasing a large area it may
 	be desirable to do it in smaller chunks for three reasons:
-		1. A single erase command will make all other I/O on
+
+	     1. A single erase command will make all other I/O on
 		the card wait.  This is not a problem if the whole card
 		is being erased, but erasing one partition will make
 		I/O for another partition on the same card wait for the
 		duration of the erase - which could be a several
 		minutes.
-		2. To be able to inform the user of erase progress.
-		3. The erase timeout becomes too large to be very
+	     2. To be able to inform the user of erase progress.
+	     3. The erase timeout becomes too large to be very
 		useful.  Because the erase timeout contains a margin
 		which is multiplied by the size of the erase area,
 		the value can end up being several minutes for large
@@ -72,6 +83,9 @@ Note on Erase Size and Preferred Erase Size:
 	"preferred_erase_size" is in bytes.
 
 Note on raw_rpmb_size_mult:
+
 	"raw_rpmb_size_mult" is a multiple of 128kB block.
+
 	RPMB size in byte is calculated by using the following equation:
-	RPMB partition size = 128kB x raw_rpmb_size_mult
+
+		RPMB partition size = 128kB x raw_rpmb_size_mult
diff --git a/Documentation/mmc/mmc-dev-parts.txt b/Documentation/mmc/mmc-dev-parts.rst
similarity index 83%
rename from Documentation/mmc/mmc-dev-parts.txt
rename to Documentation/mmc/mmc-dev-parts.rst
index f08d078d43cf..995922f1f744 100644
--- a/Documentation/mmc/mmc-dev-parts.txt
+++ b/Documentation/mmc/mmc-dev-parts.rst
@@ -1,3 +1,4 @@
+============================
 SD and MMC Device Partitions
 ============================
 
@@ -18,18 +19,18 @@ platform, write access is disabled by default to reduce the chance of
 accidental bricking.
 
 To enable write access to /dev/mmcblkXbootY, disable the forced read-only
-access with:
+access with::
 
-echo 0 > /sys/block/mmcblkXbootY/force_ro
+	echo 0 > /sys/block/mmcblkXbootY/force_ro
 
-To re-enable read-only access:
+To re-enable read-only access::
 
-echo 1 > /sys/block/mmcblkXbootY/force_ro
+	echo 1 > /sys/block/mmcblkXbootY/force_ro
 
 The boot partitions can also be locked read only until the next power on,
-with:
+with::
 
-echo 1 > /sys/block/mmcblkXbootY/ro_lock_until_next_power_on
+	echo 1 > /sys/block/mmcblkXbootY/ro_lock_until_next_power_on
 
 This is a feature of the card and not of the kernel. If the card does
 not support boot partition locking, the file will not exist. If the
diff --git a/Documentation/mmc/mmc-tools.txt b/Documentation/mmc/mmc-tools.rst
similarity index 92%
rename from Documentation/mmc/mmc-tools.txt
rename to Documentation/mmc/mmc-tools.rst
index 735509c165d5..54406093768b 100644
--- a/Documentation/mmc/mmc-tools.txt
+++ b/Documentation/mmc/mmc-tools.rst
@@ -1,14 +1,17 @@
+======================
 MMC tools introduction
 ======================
 
 There is one MMC test tools called mmc-utils, which is maintained by Chris Ball,
 you can find it at the below public git repository:
-http://git.kernel.org/cgit/linux/kernel/git/cjb/mmc-utils.git/
+
+	http://git.kernel.org/cgit/linux/kernel/git/cjb/mmc-utils.git/
 
 Functions
 =========
 
 The mmc-utils tools can do the following:
+
  - Print and parse extcsd data.
  - Determine the eMMC writeprotect status.
  - Set the eMMC writeprotect status.
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 73/79] docs: sparc: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (68 preceding siblings ...)
  2019-04-22 13:28   ` [PATCH v2 72/79] docs: mmc: " Mauro Carvalho Chehab
@ 2019-04-22 13:28   ` Mauro Carvalho Chehab
  2019-04-22 13:28   ` [PATCH v2 74/79] docs: thermal: " Mauro Carvalho Chehab
                     ` (7 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:28 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, David S. Miller, sparclinux

Rename the sparc documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

There is an except from a document under oradax dir.
It doesn't seem to make much sense to convert this one
to ReST, so let's add it as an included document.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/sparc/{adi.txt => adi.rst}      | 174 +++++++++---------
 .../sparc/{console.txt => console.rst}        |   4 +-
 Documentation/sparc/index.rst                 |  13 ++
 .../oradax/{oracle-dax.txt => oracle-dax.rst} |  58 +++---
 drivers/sbus/char/oradax.c                    |   2 +-
 5 files changed, 144 insertions(+), 107 deletions(-)
 rename Documentation/sparc/{adi.txt => adi.rst} (70%)
 rename Documentation/sparc/{console.txt => console.rst} (53%)
 create mode 100644 Documentation/sparc/index.rst
 rename Documentation/sparc/oradax/{oracle-dax.txt => oracle-dax.rst} (95%)

diff --git a/Documentation/sparc/adi.txt b/Documentation/sparc/adi.rst
similarity index 70%
rename from Documentation/sparc/adi.txt
rename to Documentation/sparc/adi.rst
index e1aed155fb89..857ad30f9569 100644
--- a/Documentation/sparc/adi.txt
+++ b/Documentation/sparc/adi.rst
@@ -1,3 +1,4 @@
+================================
 Application Data Integrity (ADI)
 ================================
 
@@ -44,12 +45,15 @@ provided by the hypervisor to the kernel.  Kernel returns the value of
 ADI block size to userspace using auxiliary vector along with other ADI
 info. Following auxiliary vectors are provided by the kernel:
 
+	============	===========================================
 	AT_ADI_BLKSZ	ADI block size. This is the granularity and
 			alignment, in bytes, of ADI versioning.
 	AT_ADI_NBITS	Number of ADI version bits in the VA
+	============	===========================================
 
 
-IMPORTANT NOTES:
+IMPORTANT NOTES
+===============
 
 - Version tag values of 0x0 and 0xf are reserved. These values match any
   tag in virtual address and never generate a mismatch exception.
@@ -86,11 +90,12 @@ IMPORTANT NOTES:
 
 
 ADI related traps
------------------
+=================
 
 With ADI enabled, following new traps may occur:
 
 Disrupting memory corruption
+----------------------------
 
 	When a store accesses a memory localtion that has TTE.mcd=1,
 	the task is running with ADI enabled (PSTATE.mcde=1), and the ADI
@@ -100,7 +105,7 @@ Disrupting memory corruption
 	first. Hypervisor creates a sun4v error report and sends a
 	resumable error (TT=0x7e) trap to the kernel. The kernel sends
 	a SIGSEGV to the task that resulted in this trap with the following
-	info:
+	info::
 
 		siginfo.si_signo = SIGSEGV;
 		siginfo.errno = 0;
@@ -110,6 +115,7 @@ Disrupting memory corruption
 
 
 Precise memory corruption
+-------------------------
 
 	When a store accesses a memory location that has TTE.mcd=1,
 	the task is running with ADI enabled (PSTATE.mcde=1), and the ADI
@@ -118,7 +124,7 @@ Precise memory corruption
 	MCD precise exception is enabled (MCDPERR=1), a precise
 	exception is sent to the kernel with TT=0x1a. The kernel sends
 	a SIGSEGV to the task that resulted in this trap with the following
-	info:
+	info::
 
 		siginfo.si_signo = SIGSEGV;
 		siginfo.errno = 0;
@@ -126,17 +132,19 @@ Precise memory corruption
 		siginfo.si_addr = addr;	/* address that caused trap */
 		siginfo.si_trapno = 0;
 
-	NOTE: ADI tag mismatch on a load always results in precise trap.
+	NOTE:
+		ADI tag mismatch on a load always results in precise trap.
 
 
 MCD disabled
+------------
 
 	When a task has not enabled ADI and attempts to set ADI version
 	on a memory address, processor sends an MCD disabled trap. This
 	trap is handled by hypervisor first and the hypervisor vectors this
 	trap through to the kernel as Data Access Exception trap with
 	fault type set to 0xa (invalid ASI). When this occurs, the kernel
-	sends the task SIGSEGV signal with following info:
+	sends the task SIGSEGV signal with following info::
 
 		siginfo.si_signo = SIGSEGV;
 		siginfo.errno = 0;
@@ -149,35 +157,35 @@ Sample program to use ADI
 -------------------------
 
 Following sample program is meant to illustrate how to use the ADI
-functionality.
+functionality::
 
-#include <unistd.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <elf.h>
-#include <sys/ipc.h>
-#include <sys/shm.h>
-#include <sys/mman.h>
-#include <asm/asi.h>
+  #include <unistd.h>
+  #include <stdio.h>
+  #include <stdlib.h>
+  #include <elf.h>
+  #include <sys/ipc.h>
+  #include <sys/shm.h>
+  #include <sys/mman.h>
+  #include <asm/asi.h>
 
-#ifndef AT_ADI_BLKSZ
-#define AT_ADI_BLKSZ	48
-#endif
-#ifndef AT_ADI_NBITS
-#define AT_ADI_NBITS	49
-#endif
+  #ifndef AT_ADI_BLKSZ
+  #define AT_ADI_BLKSZ	48
+  #endif
+  #ifndef AT_ADI_NBITS
+  #define AT_ADI_NBITS	49
+  #endif
 
-#ifndef PROT_ADI
-#define PROT_ADI	0x10
-#endif
+  #ifndef PROT_ADI
+  #define PROT_ADI	0x10
+  #endif
 
-#define BUFFER_SIZE     32*1024*1024UL
+  #define BUFFER_SIZE     32*1024*1024UL
 
-main(int argc, char* argv[], char* envp[])
-{
-        unsigned long i, mcde, adi_blksz, adi_nbits;
-        char *shmaddr, *tmp_addr, *end, *veraddr, *clraddr;
-        int shmid, version;
+  main(int argc, char* argv[], char* envp[])
+  {
+          unsigned long i, mcde, adi_blksz, adi_nbits;
+          char *shmaddr, *tmp_addr, *end, *veraddr, *clraddr;
+          int shmid, version;
 	Elf64_auxv_t *auxv;
 
 	adi_blksz = 0;
@@ -202,77 +210,77 @@ main(int argc, char* argv[], char* envp[])
 	printf("\tBlock size = %ld\n", adi_blksz);
 	printf("\tNumber of bits = %ld\n", adi_nbits);
 
-        if ((shmid = shmget(2, BUFFER_SIZE,
-                                IPC_CREAT | SHM_R | SHM_W)) < 0) {
-                perror("shmget failed");
-                exit(1);
-        }
+          if ((shmid = shmget(2, BUFFER_SIZE,
+                                  IPC_CREAT | SHM_R | SHM_W)) < 0) {
+                  perror("shmget failed");
+                  exit(1);
+          }
 
-        shmaddr = shmat(shmid, NULL, 0);
-        if (shmaddr == (char *)-1) {
-                perror("shm attach failed");
-                shmctl(shmid, IPC_RMID, NULL);
-                exit(1);
-        }
+          shmaddr = shmat(shmid, NULL, 0);
+          if (shmaddr == (char *)-1) {
+                  perror("shm attach failed");
+                  shmctl(shmid, IPC_RMID, NULL);
+                  exit(1);
+          }
 
 	if (mprotect(shmaddr, BUFFER_SIZE, PROT_READ|PROT_WRITE|PROT_ADI)) {
 		perror("mprotect failed");
 		goto err_out;
 	}
 
-        /* Set the ADI version tag on the shm segment
-         */
-        version = 10;
-        tmp_addr = shmaddr;
-        end = shmaddr + BUFFER_SIZE;
-        while (tmp_addr < end) {
-                asm volatile(
-                        "stxa %1, [%0]0x90\n\t"
-                        :
-                        : "r" (tmp_addr), "r" (version));
-                tmp_addr += adi_blksz;
-        }
+          /* Set the ADI version tag on the shm segment
+           */
+          version = 10;
+          tmp_addr = shmaddr;
+          end = shmaddr + BUFFER_SIZE;
+          while (tmp_addr < end) {
+                  asm volatile(
+                          "stxa %1, [%0]0x90\n\t"
+                          :
+                          : "r" (tmp_addr), "r" (version));
+                  tmp_addr += adi_blksz;
+          }
 	asm volatile("membar #Sync\n\t");
 
-        /* Create a versioned address from the normal address by placing
+          /* Create a versioned address from the normal address by placing
 	 * version tag in the upper adi_nbits bits
-         */
-        tmp_addr = (void *) ((unsigned long)shmaddr << adi_nbits);
-        tmp_addr = (void *) ((unsigned long)tmp_addr >> adi_nbits);
-        veraddr = (void *) (((unsigned long)version << (64-adi_nbits))
-                        | (unsigned long)tmp_addr);
+           */
+          tmp_addr = (void *) ((unsigned long)shmaddr << adi_nbits);
+          tmp_addr = (void *) ((unsigned long)tmp_addr >> adi_nbits);
+          veraddr = (void *) (((unsigned long)version << (64-adi_nbits))
+                          | (unsigned long)tmp_addr);
 
-        printf("Starting the writes:\n");
-        for (i = 0; i < BUFFER_SIZE; i++) {
-                veraddr[i] = (char)(i);
-                if (!(i % (1024 * 1024)))
-                        printf(".");
-        }
-        printf("\n");
+          printf("Starting the writes:\n");
+          for (i = 0; i < BUFFER_SIZE; i++) {
+                  veraddr[i] = (char)(i);
+                  if (!(i % (1024 * 1024)))
+                          printf(".");
+          }
+          printf("\n");
 
-        printf("Verifying data...");
+          printf("Verifying data...");
 	fflush(stdout);
-        for (i = 0; i < BUFFER_SIZE; i++)
-                if (veraddr[i] != (char)i)
-                        printf("\nIndex %lu mismatched\n", i);
-        printf("Done.\n");
+          for (i = 0; i < BUFFER_SIZE; i++)
+                  if (veraddr[i] != (char)i)
+                          printf("\nIndex %lu mismatched\n", i);
+          printf("Done.\n");
 
-        /* Disable ADI and clean up
-         */
+          /* Disable ADI and clean up
+           */
 	if (mprotect(shmaddr, BUFFER_SIZE, PROT_READ|PROT_WRITE)) {
 		perror("mprotect failed");
 		goto err_out;
 	}
 
-        if (shmdt((const void *)shmaddr) != 0)
-                perror("Detach failure");
-        shmctl(shmid, IPC_RMID, NULL);
+          if (shmdt((const void *)shmaddr) != 0)
+                  perror("Detach failure");
+          shmctl(shmid, IPC_RMID, NULL);
 
-        exit(0);
+          exit(0);
 
-err_out:
-        if (shmdt((const void *)shmaddr) != 0)
-                perror("Detach failure");
-        shmctl(shmid, IPC_RMID, NULL);
-        exit(1);
-}
+  err_out:
+          if (shmdt((const void *)shmaddr) != 0)
+                  perror("Detach failure");
+          shmctl(shmid, IPC_RMID, NULL);
+          exit(1);
+  }
diff --git a/Documentation/sparc/console.txt b/Documentation/sparc/console.rst
similarity index 53%
rename from Documentation/sparc/console.txt
rename to Documentation/sparc/console.rst
index 5aa735a44e02..73132db83ece 100644
--- a/Documentation/sparc/console.txt
+++ b/Documentation/sparc/console.rst
@@ -1,5 +1,5 @@
-Steps for sending 'break' on sunhv console:
-===========================================
+Steps for sending 'break' on sunhv console
+==========================================
 
 On Baremetal:
    1. press   Esc + 'B'
diff --git a/Documentation/sparc/index.rst b/Documentation/sparc/index.rst
new file mode 100644
index 000000000000..91f7d6643dd5
--- /dev/null
+++ b/Documentation/sparc/index.rst
@@ -0,0 +1,13 @@
+:orphan:
+
+==================
+Sparc Architecture
+==================
+
+.. toctree::
+   :maxdepth: 1
+
+   console
+   adi
+
+   oradax/oracle-dax
diff --git a/Documentation/sparc/oradax/oracle-dax.txt b/Documentation/sparc/oradax/oracle-dax.rst
similarity index 95%
rename from Documentation/sparc/oradax/oracle-dax.txt
rename to Documentation/sparc/oradax/oracle-dax.rst
index 9d53ac93286f..d1e14d572918 100644
--- a/Documentation/sparc/oradax/oracle-dax.txt
+++ b/Documentation/sparc/oradax/oracle-dax.rst
@@ -1,5 +1,6 @@
+=======================================
 Oracle Data Analytics Accelerator (DAX)
----------------------------------------
+=======================================
 
 DAX is a coprocessor which resides on the SPARC M7 (DAX1) and M8
 (DAX2) processor chips, and has direct access to the CPU's L3 caches
@@ -17,6 +18,7 @@ code sufficient to write user or kernel applications that use DAX
 functionality.
 
 The user library is open source and available at:
+
     https://oss.oracle.com/git/gitweb.cgi?p=libdax.git
 
 The Hypervisor interface to the coprocessor is described in detail in
@@ -26,7 +28,7 @@ Specification" version 3.0.20+15, dated 2017-09-25.
 
 
 High Level Overview
--------------------
+===================
 
 A coprocessor request is described by a Command Control Block
 (CCB). The CCB contains an opcode and various parameters. The opcode
@@ -52,7 +54,7 @@ thread.
 
 
 Addressing Memory
------------------
+=================
 
 The kernel does not have access to physical memory in the Sun4v
 architecture, as there is an additional level of memory virtualization
@@ -77,7 +79,7 @@ the request.
 
 
 The Driver API
---------------
+==============
 
 An application makes requests to the driver via the write() system
 call, and gets results (if any) via read(). The completion areas are
@@ -108,6 +110,7 @@ equal to the number of bytes given in the call. Otherwise -1 is
 returned and errno is set.
 
 CCB_DEQUEUE
+-----------
 
 Tells the driver to clean up resources associated with past
 requests. Since no interrupt is generated upon the completion of a
@@ -116,12 +119,14 @@ further status information is returned, so the user should not
 subsequently call read().
 
 CCB_KILL
+--------
 
 Kills a CCB during execution. The CCB is guaranteed to not continue
 executing once this call returns successfully. On success, read() must
 be called to retrieve the result of the action.
 
 CCB_INFO
+--------
 
 Retrieves information about a currently executing CCB. Note that some
 Hypervisors might return 'notfound' when the CCB is in 'inprogress'
@@ -130,6 +135,7 @@ CCB_KILL must be invoked on that CCB. Upon success, read() must be
 called to retrieve the details of the action.
 
 Submission of an array of CCBs for execution
+---------------------------------------------
 
 A write() whose length is a multiple of the CCB size is treated as a
 submit operation. The file offset is treated as the index of the
@@ -146,6 +152,7 @@ status will reflect the error caused by the first CCB that was not
 accepted, and status_data will provide additional data in some cases.
 
 MMAP
+----
 
 The mmap() function provides access to the completion area allocated
 in the driver.  Note that the completion area is not writeable by the
@@ -153,7 +160,7 @@ user process, and the mmap call must not specify PROT_WRITE.
 
 
 Completion of a Request
------------------------
+=======================
 
 The first byte in each completion area is the command status which is
 updated by the coprocessor hardware. Software may take advantage of
@@ -172,7 +179,7 @@ and resumption of execution may be just a few nanoseconds.
 
 
 Application Life Cycle of a DAX Submission
-------------------------------------------
+==========================================
 
  - open dax device
  - call mmap() to get the completion area address
@@ -187,7 +194,7 @@ Application Life Cycle of a DAX Submission
 
 
 Memory Constraints
-------------------
+==================
 
 The DAX hardware operates only on physical addresses. Therefore, it is
 not aware of virtual memory mappings and the discontiguities that may
@@ -226,7 +233,7 @@ CCB Structure
 -------------
 A CCB is an array of 8 64-bit words. Several of these words provide
 command opcodes, parameters, flags, etc., and the rest are addresses
-for the completion area, output buffer, and various inputs:
+for the completion area, output buffer, and various inputs::
 
    struct ccb {
        u64   control;
@@ -252,7 +259,7 @@ The first word (control) is examined by the driver for the following:
 
 
 Example Code
-------------
+============
 
 The DAX is accessible to both user and kernel code.  The kernel code
 can make hypercalls directly while the user code must use wrappers
@@ -265,7 +272,7 @@ arch/sparc/include/uapi/asm/oradax.h must be included.
 
 First, the proper device must be opened. For M7 it will be
 /dev/oradax1 and for M8 it will be /dev/oradax2. The simplest
-procedure is to attempt to open both, as only one will succeed:
+procedure is to attempt to open both, as only one will succeed::
 
 	fd = open("/dev/oradax1", O_RDWR);
 	if (fd < 0)
@@ -273,7 +280,7 @@ procedure is to attempt to open both, as only one will succeed:
 	if (fd < 0)
 	       /* No DAX found */
 
-Next, the completion area must be mapped:
+Next, the completion area must be mapped::
 
       completion_area = mmap(NULL, DAX_MMAP_LEN, PROT_READ, MAP_SHARED, fd, 0);
 
@@ -295,7 +302,7 @@ is the input bitmap inverted.
 
 For details of all the parameters and bits used in this CCB, please
 refer to section 36.2.1.3 of the DAX Hypervisor API document, which
-describes the Scan command in detail.
+describes the Scan command in detail::
 
 	ccb->control =       /* Table 36.1, CCB Header Format */
 		  (2L << 48)     /* command = Scan Value */
@@ -326,7 +333,7 @@ describes the Scan command in detail.
 
 The CCB submission is a write() or pwrite() system call to the
 driver. If the call fails, then a read() must be used to retrieve the
-status:
+status::
 
 	if (pwrite(fd, ccb, 64, 0) != 64) {
 		struct ccb_exec_result status;
@@ -337,7 +344,7 @@ status:
 After a successful submission of the CCB, the completion area may be
 polled to determine when the DAX is finished. Detailed information on
 the contents of the completion area can be found in section 36.2.2 of
-the DAX HV API document.
+the DAX HV API document::
 
 	while (1) {
 		/* Monitored Load */
@@ -355,7 +362,7 @@ the DAX HV API document.
 A completion area status of 1 indicates successful completion of the
 CCB and validity of the output bitmap, which may be used immediately.
 All other non-zero values indicate error conditions which are
-described in section 36.2.2.
+described in section 36.2.2::
 
 	if (completion_area[0] != 1) {	/* section 36.2.2, 1 = command ran and succeeded */
 		/* completion_area[0] contains the completion status */
@@ -364,7 +371,7 @@ described in section 36.2.2.
 
 After the completion area has been processed, the driver must be
 notified that it can release any resources associated with the
-request. This is done via the dequeue operation:
+request. This is done via the dequeue operation::
 
 	struct dax_command cmd;
 	cmd.command = CCB_DEQUEUE;
@@ -375,13 +382,14 @@ request. This is done via the dequeue operation:
 Finally, normal program cleanup should be done, i.e., unmapping
 completion area, closing the dax device, freeing memory etc.
 
-[Kernel example]
+Kernel example
+--------------
 
 The only difference in using the DAX in kernel code is the treatment
 of the completion area. Unlike user applications which mmap the
 completion area allocated by the driver, kernel code must allocate its
 own memory to use for the completion area, and this address and its
-type must be given in the CCB:
+type must be given in the CCB::
 
 	ccb->control |=      /* Table 36.1, CCB Header Format */
 	        (3L << 32);     /* completion area address type = primary virtual */
@@ -389,9 +397,11 @@ type must be given in the CCB:
 	ccb->completion = (unsigned long) completion_area;   /* Completion area address */
 
 The dax submit hypercall is made directly. The flags used in the
-ccb_submit call are documented in the DAX HV API in section 36.3.1.
+ccb_submit call are documented in the DAX HV API in section 36.3.1/
 
-#include <asm/hypervisor.h>
+::
+
+  #include <asm/hypervisor.h>
 
 	hv_rv = sun4v_ccb_submit((unsigned long)ccb, 64,
 				 HV_CCB_QUERY_CMD |
@@ -405,7 +415,7 @@ ccb_submit call are documented in the DAX HV API in section 36.3.1.
 	}
 
 After the submission, the completion area polling code is identical to
-that in user land:
+that in user land::
 
 	while (1) {
 		/* Monitored Load */
@@ -427,3 +437,9 @@ that in user land:
 
 The output bitmap is ready for consumption immediately after the
 completion status indicates success.
+
+Excer[t from UltraSPARC Virtual Machine Specification
+=====================================================
+
+ .. include:: dax-hv-api.txt
+    :literal:
diff --git a/drivers/sbus/char/oradax.c b/drivers/sbus/char/oradax.c
index 790aa148670d..8090dc9a1514 100644
--- a/drivers/sbus/char/oradax.c
+++ b/drivers/sbus/char/oradax.c
@@ -30,7 +30,7 @@
  * the recommended way for applications to use the coprocessor, and
  * the driver interface is not intended for general use.
  *
- * See Documentation/sparc/oradax/oracle-dax.txt for more details.
+ * See Documentation/sparc/oradax/oracle-dax.rst for more details.
  */
 
 #include <linux/uaccess.h>
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 74/79] docs: thermal: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (69 preceding siblings ...)
  2019-04-22 13:28   ` [PATCH v2 73/79] docs: sparc: " Mauro Carvalho Chehab
@ 2019-04-22 13:28   ` Mauro Carvalho Chehab
  2019-04-22 13:28   ` [PATCH v2 75/79] docs: rapidio: " Mauro Carvalho Chehab
                     ` (6 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:28 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Amit Daniel Kachhap, Viresh Kumar, Javi Merino,
	Kukjin Kim, Krzysztof Kozlowski, Zhang Rui, Eduardo Valentin,
	Daniel Lezcano, linux-pm, linux-arm-kernel, linux-samsung-soc,
	Arjan van de Ven

Rename the thermal documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 ...pu-cooling-api.txt => cpu-cooling-api.rst} |  39 +-
 .../{exynos_thermal => exynos_thermal.rst}    |  47 +-
 .../thermal/exynos_thermal_emulation          |  53 --
 .../thermal/exynos_thermal_emulation.rst      |  61 +++
 Documentation/thermal/index.rst               |  18 +
 ...el_powerclamp.txt => intel_powerclamp.rst} | 177 +++----
 .../{nouveau_thermal => nouveau_thermal.rst}  |  54 +-
 ...ower_allocator.txt => power_allocator.rst} | 140 ++---
 .../thermal/{sysfs-api.txt => sysfs-api.rst}  | 490 ++++++++++++------
 ...hermal => x86_pkg_temperature_thermal.rst} |  28 +-
 MAINTAINERS                                   |   2 +-
 include/linux/thermal.h                       |   4 +-
 12 files changed, 691 insertions(+), 422 deletions(-)
 rename Documentation/thermal/{cpu-cooling-api.txt => cpu-cooling-api.rst} (82%)
 rename Documentation/thermal/{exynos_thermal => exynos_thermal.rst} (67%)
 delete mode 100644 Documentation/thermal/exynos_thermal_emulation
 create mode 100644 Documentation/thermal/exynos_thermal_emulation.rst
 create mode 100644 Documentation/thermal/index.rst
 rename Documentation/thermal/{intel_powerclamp.txt => intel_powerclamp.rst} (76%)
 rename Documentation/thermal/{nouveau_thermal => nouveau_thermal.rst} (64%)
 rename Documentation/thermal/{power_allocator.txt => power_allocator.rst} (74%)
 rename Documentation/thermal/{sysfs-api.txt => sysfs-api.rst} (66%)
 rename Documentation/thermal/{x86_pkg_temperature_thermal => x86_pkg_temperature_thermal.rst} (80%)

diff --git a/Documentation/thermal/cpu-cooling-api.txt b/Documentation/thermal/cpu-cooling-api.rst
similarity index 82%
rename from Documentation/thermal/cpu-cooling-api.txt
rename to Documentation/thermal/cpu-cooling-api.rst
index 7df567eaea1a..645d914c45a6 100644
--- a/Documentation/thermal/cpu-cooling-api.txt
+++ b/Documentation/thermal/cpu-cooling-api.rst
@@ -1,5 +1,6 @@
+=======================
 CPU cooling APIs How To
-===================================
+=======================
 
 Written by Amit Daniel Kachhap <amit.kachhap@linaro.org>
 
@@ -8,40 +9,54 @@ Updated: 6 Jan 2015
 Copyright (c)  2012 Samsung Electronics Co., Ltd(http://www.samsung.com)
 
 0. Introduction
+===============
 
 The generic cpu cooling(freq clipping) provides registration/unregistration APIs
 to the caller. The binding of the cooling devices to the trip point is left for
 the user. The registration APIs returns the cooling device pointer.
 
 1. cpu cooling APIs
+===================
 
 1.1 cpufreq registration/unregistration APIs
-1.1.1 struct thermal_cooling_device *cpufreq_cooling_register(
-	struct cpumask *clip_cpus)
+--------------------------------------------
+
+    ::
+
+	struct thermal_cooling_device
+	*cpufreq_cooling_register(struct cpumask *clip_cpus)
 
     This interface function registers the cpufreq cooling device with the name
     "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
     cooling devices.
 
-   clip_cpus: cpumask of cpus where the frequency constraints will happen.
+   clip_cpus:
+	cpumask of cpus where the frequency constraints will happen.
 
-1.1.2 struct thermal_cooling_device *of_cpufreq_cooling_register(
-					struct cpufreq_policy *policy)
+    ::
+
+	struct thermal_cooling_device
+	*of_cpufreq_cooling_register(struct cpufreq_policy *policy)
 
     This interface function registers the cpufreq cooling device with
     the name "thermal-cpufreq-%x" linking it with a device tree node, in
     order to bind it via the thermal DT code. This api can support multiple
     instances of cpufreq cooling devices.
 
-    policy: CPUFreq policy.
+    policy:
+	CPUFreq policy.
 
-1.1.3 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
+
+    ::
+
+	void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
 
     This interface function unregisters the "thermal-cpufreq-%x" cooling device.
 
     cdev: Cooling device pointer which has to be unregistered.
 
 2. Power models
+===============
 
 The power API registration functions provide a simple power model for
 CPUs.  The current power is calculated as dynamic power (static power isn't
@@ -65,9 +80,9 @@ For a given processor implementation the primary factors are:
   variation.  In pathological cases this variation can be significant,
   but typically it is of a much lesser impact than the factors above.
 
-A high level dynamic power consumption model may then be represented as:
+A high level dynamic power consumption model may then be represented as::
 
-Pdyn = f(run) * Voltage^2 * Frequency * Utilisation
+	Pdyn = f(run) * Voltage^2 * Frequency * Utilisation
 
 f(run) here represents the described execution behaviour and its
 result has a units of Watts/Hz/Volt^2 (this often expressed in
@@ -80,9 +95,9 @@ factors.  Therefore, in initial implementation that contribution is
 represented as a constant coefficient.  This is a simplification
 consistent with the relative contribution to overall power variation.
 
-In this simplified representation our model becomes:
+In this simplified representation our model becomes::
 
-Pdyn = Capacitance * Voltage^2 * Frequency * Utilisation
+	Pdyn = Capacitance * Voltage^2 * Frequency * Utilisation
 
 Where `capacitance` is a constant that represents an indicative
 running time dynamic power coefficient in fundamental units of
diff --git a/Documentation/thermal/exynos_thermal b/Documentation/thermal/exynos_thermal.rst
similarity index 67%
rename from Documentation/thermal/exynos_thermal
rename to Documentation/thermal/exynos_thermal.rst
index 9010c4416967..5bd556566c70 100644
--- a/Documentation/thermal/exynos_thermal
+++ b/Documentation/thermal/exynos_thermal.rst
@@ -1,8 +1,11 @@
+========================
 Kernel driver exynos_tmu
-=================
+========================
 
 Supported chips:
+
 * ARM SAMSUNG EXYNOS4, EXYNOS5 series of SoC
+
   Datasheet: Not publicly available
 
 Authors: Donggeun Kim <dg77.kim@samsung.com>
@@ -19,32 +22,39 @@ Temperature can be taken from the temperature code.
 There are three equations converting from temperature to temperature code.
 
 The three equations are:
-  1. Two point trimming
+  1. Two point trimming::
+
 	Tc = (T - 25) * (TI2 - TI1) / (85 - 25) + TI1
 
-  2. One point trimming
+  2. One point trimming::
+
 	Tc = T + TI1 - 25
 
-  3. No trimming
+  3. No trimming::
+
 	Tc = T + 50
 
-  Tc: Temperature code, T: Temperature,
-  TI1: Trimming info for 25 degree Celsius (stored at TRIMINFO register)
+  Tc:
+       Temperature code, T: Temperature,
+  TI1:
+       Trimming info for 25 degree Celsius (stored at TRIMINFO register)
        Temperature code measured at 25 degree Celsius which is unchanged
-  TI2: Trimming info for 85 degree Celsius (stored at TRIMINFO register)
+  TI2:
+       Trimming info for 85 degree Celsius (stored at TRIMINFO register)
        Temperature code measured at 85 degree Celsius which is unchanged
 
 TMU(Thermal Management Unit) in EXYNOS4/5 generates interrupt
 when temperature exceeds pre-defined levels.
 The maximum number of configurable threshold is five.
-The threshold levels are defined as follows:
+The threshold levels are defined as follows::
+
   Level_0: current temperature > trigger_level_0 + threshold
   Level_1: current temperature > trigger_level_1 + threshold
   Level_2: current temperature > trigger_level_2 + threshold
   Level_3: current temperature > trigger_level_3 + threshold
 
-  The threshold and each trigger_level are set
-  through the corresponding registers.
+The threshold and each trigger_level are set
+through the corresponding registers.
 
 When an interrupt occurs, this driver notify kernel thermal framework
 with the function exynos_report_trigger.
@@ -54,24 +64,27 @@ it can be used to synchronize the cooling action.
 TMU driver description:
 -----------------------
 
-The exynos thermal driver is structured as,
+The exynos thermal driver is structured as::
 
 					Kernel Core thermal framework
 				(thermal_core.c, step_wise.c, cpu_cooling.c)
 								^
 								|
 								|
-TMU configuration data -------> TMU Driver  <------> Exynos Core thermal wrapper
-(exynos_tmu_data.c)	      (exynos_tmu.c)	   (exynos_thermal_common.c)
-(exynos_tmu_data.h)	      (exynos_tmu.h)	   (exynos_thermal_common.h)
+  TMU configuration data -----> TMU Driver  <----> Exynos Core thermal wrapper
+  (exynos_tmu_data.c)	      (exynos_tmu.c)	   (exynos_thermal_common.c)
+  (exynos_tmu_data.h)	      (exynos_tmu.h)	   (exynos_thermal_common.h)
 
-a) TMU configuration data: This consist of TMU register offsets/bitfields
+a) TMU configuration data:
+		This consist of TMU register offsets/bitfields
 		described through structure exynos_tmu_registers. Also several
 		other platform data (struct exynos_tmu_platform_data) members
 		are used to configure the TMU.
-b) TMU driver: This component initialises the TMU controller and sets different
+b) TMU driver:
+		This component initialises the TMU controller and sets different
 		thresholds. It invokes core thermal implementation with the call
 		exynos_report_trigger.
-c) Exynos Core thermal wrapper: This provides 3 wrapper function to use the
+c) Exynos Core thermal wrapper:
+		This provides 3 wrapper function to use the
 		Kernel core thermal framework. They are exynos_unregister_thermal,
 		exynos_register_thermal and exynos_report_trigger.
diff --git a/Documentation/thermal/exynos_thermal_emulation b/Documentation/thermal/exynos_thermal_emulation
deleted file mode 100644
index b15efec6ca28..000000000000
--- a/Documentation/thermal/exynos_thermal_emulation
+++ /dev/null
@@ -1,53 +0,0 @@
-EXYNOS EMULATION MODE
-========================
-
-Copyright (C) 2012 Samsung Electronics
-
-Written by Jonghwa Lee <jonghwa3.lee@samsung.com>
-
-Description
------------
-
-Exynos 4x12 (4212, 4412) and 5 series provide emulation mode for thermal management unit.
-Thermal emulation mode supports software debug for TMU's operation. User can set temperature
-manually with software code and TMU will read current temperature from user value not from
-sensor's value.
-
-Enabling CONFIG_THERMAL_EMULATION option will make this support available.
-When it's enabled, sysfs node will be created as
-/sys/devices/virtual/thermal/thermal_zone'zone id'/emul_temp.
-
-The sysfs node, 'emul_node', will contain value 0 for the initial state. When you input any
-temperature you want to update to sysfs node, it automatically enable emulation mode and
-current temperature will be changed into it.
-(Exynos also supports user changeable delay time which would be used to delay of
- changing temperature. However, this node only uses same delay of real sensing time, 938us.)
-
-Exynos emulation mode requires synchronous of value changing and enabling. It means when you
-want to update the any value of delay or next temperature, then you have to enable emulation
-mode at the same time. (Or you have to keep the mode enabling.) If you don't, it fails to
-change the value to updated one and just use last succeessful value repeatedly. That's why
-this node gives users the right to change termerpature only. Just one interface makes it more
-simply to use.
-
-Disabling emulation mode only requires writing value 0 to sysfs node.
-
-
-TEMP	120 |
-	    |
-	100 |
-	    |
-	 80 |
-	    |		     	 	 +-----------
-	 60 |      		     	 |	    |
-	    |	           +-------------|          |
-	 40 |              |         	 |          |
-	    |		   |	     	 |          |
-	 20 |		   |	     	 |          +----------
-	    |	 	   |	     	 |          |          |
-	  0 |______________|_____________|__________|__________|_________
-		   A	    	 A	    A	   	       A     TIME
-		   |<----->|	 |<----->|  |<----->|	       |
-		   | 938us |  	 |	 |  |       |          |
-emulation    :  0  50	   |  	 70      |  20      |          0
-current temp :   sensor   50		 70         20	      sensor
diff --git a/Documentation/thermal/exynos_thermal_emulation.rst b/Documentation/thermal/exynos_thermal_emulation.rst
new file mode 100644
index 000000000000..c21d10838bc5
--- /dev/null
+++ b/Documentation/thermal/exynos_thermal_emulation.rst
@@ -0,0 +1,61 @@
+=====================
+Exynos Emulation Mode
+=====================
+
+Copyright (C) 2012 Samsung Electronics
+
+Written by Jonghwa Lee <jonghwa3.lee@samsung.com>
+
+Description
+-----------
+
+Exynos 4x12 (4212, 4412) and 5 series provide emulation mode for thermal
+management unit. Thermal emulation mode supports software debug for
+TMU's operation. User can set temperature manually with software code
+and TMU will read current temperature from user value not from sensor's
+value.
+
+Enabling CONFIG_THERMAL_EMULATION option will make this support
+available. When it's enabled, sysfs node will be created as
+/sys/devices/virtual/thermal/thermal_zone'zone id'/emul_temp.
+
+The sysfs node, 'emul_node', will contain value 0 for the initial state.
+When you input any temperature you want to update to sysfs node, it
+automatically enable emulation mode and current temperature will be
+changed into it.
+
+(Exynos also supports user changeable delay time which would be used to
+delay of changing temperature. However, this node only uses same delay
+of real sensing time, 938us.)
+
+Exynos emulation mode requires synchronous of value changing and
+enabling. It means when you want to update the any value of delay or
+next temperature, then you have to enable emulation mode at the same
+time. (Or you have to keep the mode enabling.) If you don't, it fails to
+change the value to updated one and just use last succeessful value
+repeatedly. That's why this node gives users the right to change
+termerpature only. Just one interface makes it more simply to use.
+
+Disabling emulation mode only requires writing value 0 to sysfs node.
+
+::
+
+
+  TEMP	120 |
+	    |
+	100 |
+	    |
+	 80 |
+	    |				 +-----------
+	 60 |      			 |	    |
+	    |		   +-------------|          |
+	 40 |              |         	 |          |
+	    |		   |		 |          |
+	 20 |		   |		 |          +----------
+	    |		   |		 |          |          |
+	  0 |______________|_____________|__________|__________|_________
+		   A		 A	    A		       A     TIME
+		   |<----->|	 |<----->|  |<----->|	       |
+		   | 938us |  	 |	 |  |       |          |
+  emulation   : 0  50	   |  	 70      |  20      |          0
+  current temp:   sensor   50		 70         20	      sensor
diff --git a/Documentation/thermal/index.rst b/Documentation/thermal/index.rst
new file mode 100644
index 000000000000..8c1c00146cad
--- /dev/null
+++ b/Documentation/thermal/index.rst
@@ -0,0 +1,18 @@
+:orphan:
+
+=======
+Thermal
+=======
+
+.. toctree::
+   :maxdepth: 1
+
+   cpu-cooling-api
+   sysfs-api
+   power_allocator
+
+   exynos_thermal
+   exynos_thermal_emulation
+   intel_powerclamp
+   nouveau_thermal
+   x86_pkg_temperature_thermal
diff --git a/Documentation/thermal/intel_powerclamp.txt b/Documentation/thermal/intel_powerclamp.rst
similarity index 76%
rename from Documentation/thermal/intel_powerclamp.txt
rename to Documentation/thermal/intel_powerclamp.rst
index b5df21168fbc..3f6dfb0b3ea6 100644
--- a/Documentation/thermal/intel_powerclamp.txt
+++ b/Documentation/thermal/intel_powerclamp.rst
@@ -1,10 +1,13 @@
-			 =======================
-			 INTEL POWERCLAMP DRIVER
-			 =======================
-By: Arjan van de Ven <arjan@linux.intel.com>
-    Jacob Pan <jacob.jun.pan@linux.intel.com>
+=======================
+Intel Powerclamp Driver
+=======================
+
+By:
+  - Arjan van de Ven <arjan@linux.intel.com>
+  - Jacob Pan <jacob.jun.pan@linux.intel.com>
+
+.. Contents:
 
-Contents:
 	(*) Introduction
 	    - Goals and Objectives
 
@@ -23,7 +26,6 @@ Contents:
 	    - Generic Thermal Layer (sysfs)
 	    - Kernel APIs (TBD)
 
-============
 INTRODUCTION
 ============
 
@@ -47,7 +49,6 @@ scalability, and user experience. In many cases, clear advantage is
 shown over taking the CPU offline or modulating the CPU clock.
 
 
-===================
 THEORY OF OPERATION
 ===================
 
@@ -57,11 +58,12 @@ Idle Injection
 On modern Intel processors (Nehalem or later), package level C-state
 residency is available in MSRs, thus also available to the kernel.
 
-These MSRs are:
-      #define MSR_PKG_C2_RESIDENCY	0x60D
-      #define MSR_PKG_C3_RESIDENCY	0x3F8
-      #define MSR_PKG_C6_RESIDENCY	0x3F9
-      #define MSR_PKG_C7_RESIDENCY	0x3FA
+These MSRs are::
+
+      #define MSR_PKG_C2_RESIDENCY      0x60D
+      #define MSR_PKG_C3_RESIDENCY      0x3F8
+      #define MSR_PKG_C6_RESIDENCY      0x3F9
+      #define MSR_PKG_C7_RESIDENCY      0x3FA
 
 If the kernel can also inject idle time to the system, then a
 closed-loop control system can be established that manages package
@@ -96,19 +98,21 @@ are not masked. Tests show that the extra wakeups from scheduler tick
 have a dramatic impact on the effectiveness of the powerclamp driver
 on large scale systems (Westmere system with 80 processors).
 
-CPU0
-		  ____________          ____________
-kidle_inject/0   |   sleep    |  mwait |  sleep     |
-	_________|            |________|            |_______
-			       duration
-CPU1
-		  ____________          ____________
-kidle_inject/1   |   sleep    |  mwait |  sleep     |
-	_________|            |________|            |_______
-			      ^
-			      |
-			      |
-			      roundup(jiffies, interval)
+::
+
+  CPU0
+		    ____________          ____________
+  kidle_inject/0   |   sleep    |  mwait |  sleep     |
+	  _________|            |________|            |_______
+				 duration
+  CPU1
+		    ____________          ____________
+  kidle_inject/1   |   sleep    |  mwait |  sleep     |
+	  _________|            |________|            |_______
+				^
+				|
+				|
+				roundup(jiffies, interval)
 
 Only one CPU is allowed to collect statistics and update global
 control parameters. This CPU is referred to as the controlling CPU in
@@ -148,7 +152,7 @@ b) determine the amount of compensation needed at each target ratio
 
 Compensation to each target ratio consists of two parts:
 
-        a) steady state error compensation
+	a) steady state error compensation
 	This is to offset the error occurring when the system can
 	enter idle without extra wakeups (such as external interrupts).
 
@@ -158,41 +162,42 @@ Compensation to each target ratio consists of two parts:
 	slowing down CPU activities.
 
 A debugfs file is provided for the user to examine compensation
-progress and results, such as on a Westmere system.
-[jacob@nex01 ~]$ cat
-/sys/kernel/debug/intel_powerclamp/powerclamp_calib
-controlling cpu: 0
-pct confidence steady dynamic (compensation)
-0	0	0	0
-1	1	0	0
-2	1	1	0
-3	3	1	0
-4	3	1	0
-5	3	1	0
-6	3	1	0
-7	3	1	0
-8	3	1	0
-...
-30	3	2	0
-31	3	2	0
-32	3	1	0
-33	3	2	0
-34	3	1	0
-35	3	2	0
-36	3	1	0
-37	3	2	0
-38	3	1	0
-39	3	2	0
-40	3	3	0
-41	3	1	0
-42	3	2	0
-43	3	1	0
-44	3	1	0
-45	3	2	0
-46	3	3	0
-47	3	0	0
-48	3	2	0
-49	3	3	0
+progress and results, such as on a Westmere system::
+
+  [jacob@nex01 ~]$ cat
+  /sys/kernel/debug/intel_powerclamp/powerclamp_calib
+  controlling cpu: 0
+  pct confidence steady dynamic (compensation)
+  0       0       0       0
+  1       1       0       0
+  2       1       1       0
+  3       3       1       0
+  4       3       1       0
+  5       3       1       0
+  6       3       1       0
+  7       3       1       0
+  8       3       1       0
+  ...
+  30      3       2       0
+  31      3       2       0
+  32      3       1       0
+  33      3       2       0
+  34      3       1       0
+  35      3       2       0
+  36      3       1       0
+  37      3       2       0
+  38      3       1       0
+  39      3       2       0
+  40      3       3       0
+  41      3       1       0
+  42      3       2       0
+  43      3       1       0
+  44      3       1       0
+  45      3       2       0
+  46      3       3       0
+  47      3       0       0
+  48      3       2       0
+  49      3       3       0
 
 Calibration occurs during runtime. No offline method is available.
 Steady state compensation is used only when confidence levels of all
@@ -217,9 +222,8 @@ keeps track of clamping kernel threads, even after they are migrated
 to other CPUs, after a CPU offline event.
 
 
-=====================
 Performance Analysis
-=====================
+====================
 This section describes the general performance data collected on
 multiple systems, including Westmere (80P) and Ivy Bridge (4P, 8P).
 
@@ -257,16 +261,15 @@ achieve up to 40% better performance per watt. (measured by a spin
 counter summed over per CPU counting threads spawned for all running
 CPUs).
 
-====================
 Usage and Interfaces
 ====================
 The powerclamp driver is registered to the generic thermal layer as a
-cooling device. Currently, it’s not bound to any thermal zones.
+cooling device. Currently, it’s not bound to any thermal zones::
 
-jacob@chromoly:/sys/class/thermal/cooling_device14$ grep . *
-cur_state:0
-max_state:50
-type:intel_powerclamp
+  jacob@chromoly:/sys/class/thermal/cooling_device14$ grep . *
+  cur_state:0
+  max_state:50
+  type:intel_powerclamp
 
 cur_state allows user to set the desired idle percentage. Writing 0 to
 cur_state will stop idle injection. Writing a value between 1 and
@@ -278,9 +281,9 @@ cur_state returns value -1 instead of 0 which is to avoid confusing
 100% busy state with the disabled state.
 
 Example usage:
-- To inject 25% idle time
-$ sudo sh -c "echo 25 > /sys/class/thermal/cooling_device80/cur_state
-"
+- To inject 25% idle time::
+
+	$ sudo sh -c "echo 25 > /sys/class/thermal/cooling_device80/cur_state
 
 If the system is not busy and has more than 25% idle time already,
 then the powerclamp driver will not start idle injection. Using Top
@@ -292,23 +295,23 @@ idle time is accounted as normal idle in that common code path is
 taken as the idle task.
 
 In this example, 24.1% idle is shown. This helps the system admin or
-user determine the cause of slowdown, when a powerclamp driver is in action.
+user determine the cause of slowdown, when a powerclamp driver is in action::
 
 
-Tasks: 197 total,   1 running, 196 sleeping,   0 stopped,   0 zombie
-Cpu(s): 71.2%us,  4.7%sy,  0.0%ni, 24.1%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st
-Mem:   3943228k total,  1689632k used,  2253596k free,    74960k buffers
-Swap:  4087804k total,        0k used,  4087804k free,   945336k cached
+  Tasks: 197 total,   1 running, 196 sleeping,   0 stopped,   0 zombie
+  Cpu(s): 71.2%us,  4.7%sy,  0.0%ni, 24.1%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st
+  Mem:   3943228k total,  1689632k used,  2253596k free,    74960k buffers
+  Swap:  4087804k total,        0k used,  4087804k free,   945336k cached
 
-  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
- 3352 jacob     20   0  262m  644  428 S  286  0.0   0:17.16 spin
- 3341 root     -51   0     0    0    0 D   25  0.0   0:01.62 kidle_inject/0
- 3344 root     -51   0     0    0    0 D   25  0.0   0:01.60 kidle_inject/3
- 3342 root     -51   0     0    0    0 D   25  0.0   0:01.61 kidle_inject/1
- 3343 root     -51   0     0    0    0 D   25  0.0   0:01.60 kidle_inject/2
- 2935 jacob     20   0  696m 125m  35m S    5  3.3   0:31.11 firefox
- 1546 root      20   0  158m  20m 6640 S    3  0.5   0:26.97 Xorg
- 2100 jacob     20   0 1223m  88m  30m S    3  2.3   0:23.68 compiz
+    PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
+   3352 jacob     20   0  262m  644  428 S  286  0.0   0:17.16 spin
+   3341 root     -51   0     0    0    0 D   25  0.0   0:01.62 kidle_inject/0
+   3344 root     -51   0     0    0    0 D   25  0.0   0:01.60 kidle_inject/3
+   3342 root     -51   0     0    0    0 D   25  0.0   0:01.61 kidle_inject/1
+   3343 root     -51   0     0    0    0 D   25  0.0   0:01.60 kidle_inject/2
+   2935 jacob     20   0  696m 125m  35m S    5  3.3   0:31.11 firefox
+   1546 root      20   0  158m  20m 6640 S    3  0.5   0:26.97 Xorg
+   2100 jacob     20   0 1223m  88m  30m S    3  2.3   0:23.68 compiz
 
 Tests have shown that by using the powerclamp driver as a cooling
 device, a PID based userspace thermal controller can manage to
diff --git a/Documentation/thermal/nouveau_thermal b/Documentation/thermal/nouveau_thermal.rst
similarity index 64%
rename from Documentation/thermal/nouveau_thermal
rename to Documentation/thermal/nouveau_thermal.rst
index 6e17a11efcb0..37255fd6735d 100644
--- a/Documentation/thermal/nouveau_thermal
+++ b/Documentation/thermal/nouveau_thermal.rst
@@ -1,13 +1,15 @@
+=====================
 Kernel driver nouveau
-===================
+=====================
 
 Supported chips:
+
 * NV43+
 
 Authors: Martin Peres (mupuf) <martin.peres@free.fr>
 
 Description
----------
+-----------
 
 This driver allows to read the GPU core temperature, drive the GPU fan and
 set temperature alarms.
@@ -19,20 +21,25 @@ interface is likely not to work. This document may then not cover your situation
 entirely.
 
 Temperature management
---------------------
+----------------------
 
 Temperature is exposed under as a read-only HWMON attribute temp1_input.
 
 In order to protect the GPU from overheating, Nouveau supports 4 configurable
 temperature thresholds:
 
- * Fan_boost: Fan speed is set to 100% when reaching this temperature;
- * Downclock: The GPU will be downclocked to reduce its power dissipation;
- * Critical: The GPU is put on hold to further lower power dissipation;
- * Shutdown: Shut the computer down to protect your GPU.
+ * Fan_boost:
+	Fan speed is set to 100% when reaching this temperature;
+ * Downclock:
+	The GPU will be downclocked to reduce its power dissipation;
+ * Critical:
+	The GPU is put on hold to further lower power dissipation;
+ * Shutdown:
+	Shut the computer down to protect your GPU.
 
-WARNING: Some of these thresholds may not be used by Nouveau depending
-on your chipset.
+WARNING:
+	Some of these thresholds may not be used by Nouveau depending
+	on your chipset.
 
 The default value for these thresholds comes from the GPU's vbios. These
 thresholds can be configured thanks to the following HWMON attributes:
@@ -46,19 +53,24 @@ NOTE: Remember that the values are stored as milli degrees Celsius. Don't forget
 to multiply!
 
 Fan management
-------------
+--------------
 
 Not all cards have a drivable fan. If you do, then the following HWMON
 attributes should be available:
 
- * pwm1_enable: Current fan management mode (NONE, MANUAL or AUTO);
- * pwm1: Current PWM value (power percentage);
- * pwm1_min: The minimum PWM speed allowed;
- * pwm1_max: The maximum PWM speed allowed (bypassed when hitting Fan_boost);
+ * pwm1_enable:
+	Current fan management mode (NONE, MANUAL or AUTO);
+ * pwm1:
+	Current PWM value (power percentage);
+ * pwm1_min:
+	The minimum PWM speed allowed;
+ * pwm1_max:
+	The maximum PWM speed allowed (bypassed when hitting Fan_boost);
 
 You may also have the following attribute:
 
- * fan1_input: Speed in RPM of your fan.
+ * fan1_input:
+	Speed in RPM of your fan.
 
 Your fan can be driven in different modes:
 
@@ -66,14 +78,16 @@ Your fan can be driven in different modes:
  * 1: The fan can be driven in manual (use pwm1 to change the speed);
  * 2; The fan is driven automatically depending on the temperature.
 
-NOTE: Be sure to use the manual mode if you want to drive the fan speed manually
+NOTE:
+  Be sure to use the manual mode if you want to drive the fan speed manually
 
-NOTE2: When operating in manual mode outside the vbios-defined
-[PWM_min, PWM_max] range, the reported fan speed (RPM) may not be accurate
-depending on your hardware.
+NOTE2:
+  When operating in manual mode outside the vbios-defined
+  [PWM_min, PWM_max] range, the reported fan speed (RPM) may not be accurate
+  depending on your hardware.
 
 Bug reports
----------
+-----------
 
 Thermal management on Nouveau is new and may not work on all cards. If you have
 inquiries, please ping mupuf on IRC (#nouveau, freenode).
diff --git a/Documentation/thermal/power_allocator.txt b/Documentation/thermal/power_allocator.rst
similarity index 74%
rename from Documentation/thermal/power_allocator.txt
rename to Documentation/thermal/power_allocator.rst
index 9fb0ff06dca9..67b6a3297238 100644
--- a/Documentation/thermal/power_allocator.txt
+++ b/Documentation/thermal/power_allocator.rst
@@ -1,3 +1,4 @@
+=================================
 Power allocator governor tunables
 =================================
 
@@ -25,36 +26,36 @@ temperature as the control input and power as the controlled output:
     P_max = k_p * e + k_i * err_integral + k_d * diff_err + sustainable_power
 
 where
-    e = desired_temperature - current_temperature
-    err_integral is the sum of previous errors
-    diff_err = e - previous_error
+   -  e = desired_temperature - current_temperature
+   -  err_integral is the sum of previous errors
+   -  diff_err = e - previous_error
 
-It is similar to the one depicted below:
+It is similar to the one depicted below::
 
-                                      k_d
-                                       |
-current_temp                           |
-     |                                 v
-     |                +----------+   +---+
-     |         +----->| diff_err |-->| X |------+
-     |         |      +----------+   +---+      |
-     |         |                                |      tdp        actor
-     |         |                      k_i       |       |  get_requested_power()
-     |         |                       |        |       |        |     |
-     |         |                       |        |       |        |     | ...
-     v         |                       v        v       v        v     v
-   +---+       |      +-------+      +---+    +---+   +---+   +----------+
-   | S |-------+----->| sum e |----->| X |--->| S |-->| S |-->|power     |
-   +---+       |      +-------+      +---+    +---+   +---+   |allocation|
-     ^         |                                ^             +----------+
-     |         |                                |                |     |
-     |         |        +---+                   |                |     |
-     |         +------->| X |-------------------+                v     v
-     |                  +---+                               granted performance
-desired_temperature       ^
-                          |
-                          |
-                      k_po/k_pu
+				      k_d
+				       |
+  current_temp                         |
+       |                               v
+       |              +----------+   +---+
+       |       +----->| diff_err |-->| X |------+
+       |       |      +----------+   +---+      |
+       |       |                                |      tdp        actor
+       |       |                      k_i       |       |  get_requested_power()
+       |       |                       |        |       |        |     |
+       |       |                       |        |       |        |     | ...
+       v       |                       v        v       v        v     v
+     +---+     |      +-------+      +---+    +---+   +---+   +----------+
+     | S |-----+----->| sum e |----->| X |--->| S |-->| S |-->|power     |
+     +---+     |      +-------+      +---+    +---+   +---+   |allocation|
+       ^       |                                ^             +----------+
+       |       |                                |                |     |
+       |       |        +---+                   |                |     |
+       |       +------->| X |-------------------+                v     v
+       |                +---+                               granted performance
+  desired_temperature     ^
+			  |
+			  |
+		      k_po/k_pu
 
 Sustainable power
 -----------------
@@ -73,7 +74,7 @@ is typically 2000mW, while on a 10" tablet is around 4500mW (may vary
 depending on screen size).
 
 If you are using device tree, do add it as a property of the
-thermal-zone.  For example:
+thermal-zone.  For example::
 
 	thermal-zones {
 		soc_thermal {
@@ -85,7 +86,7 @@ thermal-zone.  For example:
 Instead, if the thermal zone is registered from the platform code, pass a
 `thermal_zone_params` that has a `sustainable_power`.  If no
 `thermal_zone_params` were being passed, then something like below
-will suffice:
+will suffice::
 
 	static const struct thermal_zone_params tz_params = {
 		.sustainable_power = 3500,
@@ -112,18 +113,18 @@ available capacity at a low temperature.  On the other hand, a high
 value of `k_pu` will result in the governor granting very high power
 while temperature is low, and may lead to temperature overshooting.
 
-The default value for `k_pu` is:
+The default value for `k_pu` is::
 
     2 * sustainable_power / (desired_temperature - switch_on_temp)
 
 This means that at `switch_on_temp` the output of the controller's
 proportional term will be 2 * `sustainable_power`.  The default value
-for `k_po` is:
+for `k_po` is::
 
     sustainable_power / (desired_temperature - switch_on_temp)
 
 Focusing on the proportional and feed forward values of the PID
-controller equation we have:
+controller equation we have::
 
     P_max = k_p * e + sustainable_power
 
@@ -134,21 +135,23 @@ is the desired one, then the proportional component is zero and
 thermal equilibrium under constant load.  `sustainable_power` is only
 an estimate, which is the reason for closed-loop control such as this.
 
-Expanding `k_pu` we get:
+Expanding `k_pu` we get::
+
     P_max = 2 * sustainable_power * (T_set - T) / (T_set - T_on) +
-        sustainable_power
+	sustainable_power
 
-where
-    T_set is the desired temperature
-    T is the current temperature
-    T_on is the switch on temperature
+where:
+
+    - T_set is the desired temperature
+    - T is the current temperature
+    - T_on is the switch on temperature
 
 When the current temperature is the switch_on temperature, the above
-formula becomes:
+formula becomes::
 
     P_max = 2 * sustainable_power * (T_set - T_on) / (T_set - T_on) +
-        sustainable_power = 2 * sustainable_power + sustainable_power =
-        3 * sustainable_power
+	sustainable_power = 2 * sustainable_power + sustainable_power =
+	3 * sustainable_power
 
 Therefore, the proportional term alone linearly decreases power from
 3 * `sustainable_power` to `sustainable_power` as the temperature
@@ -178,11 +181,18 @@ Cooling device power API
 Cooling devices controlled by this governor must supply the additional
 "power" API in their `cooling_device_ops`.  It consists on three ops:
 
-1. int get_requested_power(struct thermal_cooling_device *cdev,
-	struct thermal_zone_device *tz, u32 *power);
-@cdev: The `struct thermal_cooling_device` pointer
-@tz: thermal zone in which we are currently operating
-@power: pointer in which to store the calculated power
+1. ::
+
+    int get_requested_power(struct thermal_cooling_device *cdev,
+			    struct thermal_zone_device *tz, u32 *power);
+
+
+@cdev:
+	The `struct thermal_cooling_device` pointer
+@tz:
+	thermal zone in which we are currently operating
+@power:
+	pointer in which to store the calculated power
 
 `get_requested_power()` calculates the power requested by the device
 in milliwatts and stores it in @power .  It should return 0 on
@@ -190,23 +200,37 @@ success, -E* on failure.  This is currently used by the power
 allocator governor to calculate how much power to give to each cooling
 device.
 
-2. int state2power(struct thermal_cooling_device *cdev, struct
-        thermal_zone_device *tz, unsigned long state, u32 *power);
-@cdev: The `struct thermal_cooling_device` pointer
-@tz: thermal zone in which we are currently operating
-@state: A cooling device state
-@power: pointer in which to store the equivalent power
+2. ::
+
+	int state2power(struct thermal_cooling_device *cdev, struct
+			thermal_zone_device *tz, unsigned long state,
+			u32 *power);
+
+@cdev:
+	The `struct thermal_cooling_device` pointer
+@tz:
+	thermal zone in which we are currently operating
+@state:
+	A cooling device state
+@power:
+	pointer in which to store the equivalent power
 
 Convert cooling device state @state into power consumption in
 milliwatts and store it in @power.  It should return 0 on success, -E*
 on failure.  This is currently used by thermal core to calculate the
 maximum power that an actor can consume.
 
-3. int power2state(struct thermal_cooling_device *cdev, u32 power,
-	unsigned long *state);
-@cdev: The `struct thermal_cooling_device` pointer
-@power: power in milliwatts
-@state: pointer in which to store the resulting state
+3. ::
+
+	int power2state(struct thermal_cooling_device *cdev, u32 power,
+			unsigned long *state);
+
+@cdev:
+	The `struct thermal_cooling_device` pointer
+@power:
+	power in milliwatts
+@state:
+	pointer in which to store the resulting state
 
 Calculate a cooling device state that would make the device consume at
 most @power mW and store it in @state.  It should return 0 on success,
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.rst
similarity index 66%
rename from Documentation/thermal/sysfs-api.txt
rename to Documentation/thermal/sysfs-api.rst
index c3fa500df92c..e4930761d3e5 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.rst
@@ -1,3 +1,4 @@
+===================================
 Generic Thermal Sysfs driver How To
 ===================================
 
@@ -9,6 +10,7 @@ Copyright (c)  2008 Intel Corporation
 
 
 0. Introduction
+===============
 
 The generic thermal sysfs provides a set of interfaces for thermal zone
 devices (sensors) and thermal cooling devices (fan, processor...) to register
@@ -25,59 +27,90 @@ An intelligent thermal management application can make decisions based on
 inputs from thermal zone attributes (the current temperature and trip point
 temperature) and throttle appropriate devices.
 
-[0-*]	denotes any positive number starting from 0
-[1-*]	denotes any positive number starting from 1
+- `[0-*]`	denotes any positive number starting from 0
+- `[1-*]`	denotes any positive number starting from 1
 
 1. thermal sysfs driver interface functions
+===========================================
 
 1.1 thermal zone device interface
-1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *type,
-		int trips, int mask, void *devdata,
-		struct thermal_zone_device_ops *ops,
-		const struct thermal_zone_params *tzp,
-		int passive_delay, int polling_delay))
+---------------------------------
+
+    ::
+
+	struct thermal_zone_device
+	*thermal_zone_device_register(char *type,
+				      int trips, int mask, void *devdata,
+				      struct thermal_zone_device_ops *ops,
+				      const struct thermal_zone_params *tzp,
+				      int passive_delay, int polling_delay))
 
     This interface function adds a new thermal zone device (sensor) to
-    /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the
+    /sys/class/thermal folder as `thermal_zone[0-*]`. It tries to bind all the
     thermal cooling devices registered at the same time.
 
-    type: the thermal zone type.
-    trips: the total number of trip points this thermal zone supports.
-    mask: Bit string: If 'n'th bit is set, then trip point 'n' is writeable.
-    devdata: device private data
-    ops: thermal zone device call-backs.
-	.bind: bind the thermal zone device with a thermal cooling device.
-	.unbind: unbind the thermal zone device with a thermal cooling device.
-	.get_temp: get the current temperature of the thermal zone.
-	.set_trips: set the trip points window. Whenever the current temperature
+    type:
+	the thermal zone type.
+    trips:
+	the total number of trip points this thermal zone supports.
+    mask:
+	Bit string: If 'n'th bit is set, then trip point 'n' is writeable.
+    devdata:
+	device private data
+    ops:
+	thermal zone device call-backs.
+
+	.bind:
+		bind the thermal zone device with a thermal cooling device.
+	.unbind:
+		unbind the thermal zone device with a thermal cooling device.
+	.get_temp:
+		get the current temperature of the thermal zone.
+	.set_trips:
+		    set the trip points window. Whenever the current temperature
 		    is updated, the trip points immediately below and above the
 		    current temperature are found.
-	.get_mode: get the current mode (enabled/disabled) of the thermal zone.
-	    - "enabled" means the kernel thermal management is enabled.
-	    - "disabled" will prevent kernel thermal driver action upon trip points
-	      so that user applications can take charge of thermal management.
-	.set_mode: set the mode (enabled/disabled) of the thermal zone.
-	.get_trip_type: get the type of certain trip point.
-	.get_trip_temp: get the temperature above which the certain trip point
+	.get_mode:
+		   get the current mode (enabled/disabled) of the thermal zone.
+
+			- "enabled" means the kernel thermal management is
+			  enabled.
+			- "disabled" will prevent kernel thermal driver action
+			  upon trip points so that user applications can take
+			  charge of thermal management.
+	.set_mode:
+		set the mode (enabled/disabled) of the thermal zone.
+	.get_trip_type:
+		get the type of certain trip point.
+	.get_trip_temp:
+			get the temperature above which the certain trip point
 			will be fired.
-	.set_emul_temp: set the emulation temperature which helps in debugging
+	.set_emul_temp:
+			set the emulation temperature which helps in debugging
 			different threshold temperature points.
-    tzp: thermal zone platform parameters.
-    passive_delay: number of milliseconds to wait between polls when
+    tzp:
+	thermal zone platform parameters.
+    passive_delay:
+	number of milliseconds to wait between polls when
 	performing passive cooling.
-    polling_delay: number of milliseconds to wait between polls when checking
+    polling_delay:
+	number of milliseconds to wait between polls when checking
 	whether trip points have been crossed (0 for interrupt driven systems).
 
+    ::
 
-1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
+	void thermal_zone_device_unregister(struct thermal_zone_device *tz)
 
     This interface function removes the thermal zone device.
     It deletes the corresponding entry from /sys/class/thermal folder and
     unbinds all the thermal cooling devices it uses.
 
-1.1.3 struct thermal_zone_device *thermal_zone_of_sensor_register(
-		struct device *dev, int sensor_id, void *data,
-		const struct thermal_zone_of_device_ops *ops)
+	::
+
+	   struct thermal_zone_device
+	   *thermal_zone_of_sensor_register(struct device *dev, int sensor_id,
+				void *data,
+				const struct thermal_zone_of_device_ops *ops)
 
 	This interface adds a new sensor to a DT thermal zone.
 	This function will search the list of thermal zones described in
@@ -87,25 +120,33 @@ temperature) and throttle appropriate devices.
 	thermal zone device.
 
 	The parameters for this interface are:
-	dev:		Device node of sensor containing valid node pointer in
+
+	dev:
+			Device node of sensor containing valid node pointer in
 			dev->of_node.
-	sensor_id:	a sensor identifier, in case the sensor IP has more
+	sensor_id:
+			a sensor identifier, in case the sensor IP has more
 			than one sensors
-	data:		a private pointer (owned by the caller) that will be
+	data:
+			a private pointer (owned by the caller) that will be
 			passed back, when a temperature reading is needed.
-	ops:		struct thermal_zone_of_device_ops *.
+	ops:
+			`struct thermal_zone_of_device_ops *`.
 
-			get_temp:	a pointer to a function that reads the
+			==============  =======================================
+			get_temp	a pointer to a function that reads the
 					sensor temperature. This is mandatory
 					callback provided by sensor driver.
-			set_trips:      a pointer to a function that sets a
+			set_trips	a pointer to a function that sets a
 					temperature window. When this window is
 					left the driver must inform the thermal
 					core via thermal_zone_device_update.
-			get_trend: 	a pointer to a function that reads the
+			get_trend 	a pointer to a function that reads the
 					sensor temperature trend.
-			set_emul_temp:	a pointer to a function that sets
+			set_emul_temp	a pointer to a function that sets
 					sensor emulated temperature.
+			==============  =======================================
+
 	The thermal zone temperature is provided by the get_temp() function
 	pointer of thermal_zone_of_device_ops. When called, it will
 	have the private pointer @data back.
@@ -114,8 +155,10 @@ temperature) and throttle appropriate devices.
 	handle. Caller should check the return handle with IS_ERR() for finding
 	whether success or not.
 
-1.1.4 void thermal_zone_of_sensor_unregister(struct device *dev,
-		struct thermal_zone_device *tzd)
+	::
+
+	    void thermal_zone_of_sensor_unregister(struct device *dev,
+						   struct thermal_zone_device *tzd)
 
 	This interface unregisters a sensor from a DT thermal zone which was
 	successfully added by interface thermal_zone_of_sensor_register().
@@ -124,21 +167,29 @@ temperature) and throttle appropriate devices.
 	interface. It will also silent the zone by remove the .get_temp() and
 	get_trend() thermal zone device callbacks.
 
-1.1.5 struct thermal_zone_device *devm_thermal_zone_of_sensor_register(
-		struct device *dev, int sensor_id,
-		void *data, const struct thermal_zone_of_device_ops *ops)
+	::
+
+	  struct thermal_zone_device
+	  *devm_thermal_zone_of_sensor_register(struct device *dev,
+				int sensor_id,
+				void *data,
+				const struct thermal_zone_of_device_ops *ops)
 
 	This interface is resource managed version of
 	thermal_zone_of_sensor_register().
+
 	All details of thermal_zone_of_sensor_register() described in
 	section 1.1.3 is applicable here.
+
 	The benefit of using this interface to register sensor is that it
 	is not require to explicitly call thermal_zone_of_sensor_unregister()
 	in error path or during driver unbinding as this is done by driver
 	resource manager.
 
-1.1.6 void devm_thermal_zone_of_sensor_unregister(struct device *dev,
-		struct thermal_zone_device *tzd)
+	::
+
+		void devm_thermal_zone_of_sensor_unregister(struct device *dev,
+						struct thermal_zone_device *tzd)
 
 	This interface is resource managed version of
 	thermal_zone_of_sensor_unregister().
@@ -147,123 +198,186 @@ temperature) and throttle appropriate devices.
 	Normally this function will not need to be called and the resource
 	management code will ensure that the resource is freed.
 
-1.1.7 int thermal_zone_get_slope(struct thermal_zone_device *tz)
+	::
+
+		int thermal_zone_get_slope(struct thermal_zone_device *tz)
 
 	This interface is used to read the slope attribute value
 	for the thermal zone device, which might be useful for platform
 	drivers for temperature calculations.
 
-1.1.8 int thermal_zone_get_offset(struct thermal_zone_device *tz)
+	::
+
+		int thermal_zone_get_offset(struct thermal_zone_device *tz)
 
 	This interface is used to read the offset attribute value
 	for the thermal zone device, which might be useful for platform
 	drivers for temperature calculations.
 
 1.2 thermal cooling device interface
-1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name,
-		void *devdata, struct thermal_cooling_device_ops *)
+------------------------------------
+
+
+    ::
+
+	struct thermal_cooling_device
+	*thermal_cooling_device_register(char *name,
+			void *devdata, struct thermal_cooling_device_ops *)
 
     This interface function adds a new thermal cooling device (fan/processor/...)
-    to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
+    to /sys/class/thermal/ folder as `cooling_device[0-*]`. It tries to bind itself
     to all the thermal zone devices registered at the same time.
-    name: the cooling device name.
-    devdata: device private data.
-    ops: thermal cooling devices call-backs.
-	.get_max_state: get the Maximum throttle state of the cooling device.
-	.get_cur_state: get the Currently requested throttle state of the cooling device.
-	.set_cur_state: set the Current throttle state of the cooling device.
-
-1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
+
+    name:
+	the cooling device name.
+    devdata:
+	device private data.
+    ops:
+	thermal cooling devices call-backs.
+
+	.get_max_state:
+		get the Maximum throttle state of the cooling device.
+	.get_cur_state:
+		get the Currently requested throttle state of the
+		cooling device.
+	.set_cur_state:
+		set the Current throttle state of the cooling device.
+
+    ::
+
+	void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
 
     This interface function removes the thermal cooling device.
     It deletes the corresponding entry from /sys/class/thermal folder and
     unbinds itself from all the thermal zone devices using it.
 
 1.3 interface for binding a thermal zone device with a thermal cooling device
-1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
-	int trip, struct thermal_cooling_device *cdev,
-	unsigned long upper, unsigned long lower, unsigned int weight);
+-----------------------------------------------------------------------------
+
+    ::
+
+	int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
+		int trip, struct thermal_cooling_device *cdev,
+		unsigned long upper, unsigned long lower, unsigned int weight);
 
     This interface function binds a thermal cooling device to a particular trip
     point of a thermal zone device.
+
     This function is usually called in the thermal zone device .bind callback.
-    tz: the thermal zone device
-    cdev: thermal cooling device
-    trip: indicates which trip point in this thermal zone the cooling device
-          is associated with.
-    upper:the Maximum cooling state for this trip point.
-          THERMAL_NO_LIMIT means no upper limit,
+
+    tz:
+	  the thermal zone device
+    cdev:
+	  thermal cooling device
+    trip:
+	  indicates which trip point in this thermal zone the cooling device
+	  is associated with.
+    upper:
+	  the Maximum cooling state for this trip point.
+	  THERMAL_NO_LIMIT means no upper limit,
 	  and the cooling device can be in max_state.
-    lower:the Minimum cooling state can be used for this trip point.
-          THERMAL_NO_LIMIT means no lower limit,
+    lower:
+	  the Minimum cooling state can be used for this trip point.
+	  THERMAL_NO_LIMIT means no lower limit,
 	  and the cooling device can be in cooling state 0.
-    weight: the influence of this cooling device in this thermal
-            zone.  See 1.4.1 below for more information.
+    weight:
+	  the influence of this cooling device in this thermal
+	  zone.  See 1.4.1 below for more information.
 
-1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
-		int trip, struct thermal_cooling_device *cdev);
+    ::
+
+	int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
+				int trip, struct thermal_cooling_device *cdev);
 
     This interface function unbinds a thermal cooling device from a particular
     trip point of a thermal zone device. This function is usually called in
     the thermal zone device .unbind callback.
-    tz: the thermal zone device
-    cdev: thermal cooling device
-    trip: indicates which trip point in this thermal zone the cooling device
-          is associated with.
+
+    tz:
+	the thermal zone device
+    cdev:
+	thermal cooling device
+    trip:
+	indicates which trip point in this thermal zone the cooling device
+	is associated with.
 
 1.4 Thermal Zone Parameters
-1.4.1 struct thermal_bind_params
+---------------------------
+
+    ::
+
+	struct thermal_bind_params
+
     This structure defines the following parameters that are used to bind
     a zone with a cooling device for a particular trip point.
-    .cdev: The cooling device pointer
-    .weight: The 'influence' of a particular cooling device on this
-             zone. This is relative to the rest of the cooling
-             devices. For example, if all cooling devices have a
-             weight of 1, then they all contribute the same. You can
-             use percentages if you want, but it's not mandatory. A
-             weight of 0 means that this cooling device doesn't
-             contribute to the cooling of this zone unless all cooling
-             devices have a weight of 0. If all weights are 0, then
-             they all contribute the same.
-    .trip_mask:This is a bit mask that gives the binding relation between
-               this thermal zone and cdev, for a particular trip point.
-               If nth bit is set, then the cdev and thermal zone are bound
-               for trip point n.
-    .binding_limits: This is an array of cooling state limits. Must have
-                     exactly 2 * thermal_zone.number_of_trip_points. It is an
-                     array consisting of tuples <lower-state upper-state> of
-                     state limits. Each trip will be associated with one state
-                     limit tuple when binding. A NULL pointer means
-                     <THERMAL_NO_LIMITS THERMAL_NO_LIMITS> on all trips.
-                     These limits are used when binding a cdev to a trip point.
-    .match: This call back returns success(0) if the 'tz and cdev' need to
+
+    .cdev:
+	     The cooling device pointer
+    .weight:
+	     The 'influence' of a particular cooling device on this
+	     zone. This is relative to the rest of the cooling
+	     devices. For example, if all cooling devices have a
+	     weight of 1, then they all contribute the same. You can
+	     use percentages if you want, but it's not mandatory. A
+	     weight of 0 means that this cooling device doesn't
+	     contribute to the cooling of this zone unless all cooling
+	     devices have a weight of 0. If all weights are 0, then
+	     they all contribute the same.
+    .trip_mask:
+	       This is a bit mask that gives the binding relation between
+	       this thermal zone and cdev, for a particular trip point.
+	       If nth bit is set, then the cdev and thermal zone are bound
+	       for trip point n.
+    .binding_limits:
+		     This is an array of cooling state limits. Must have
+		     exactly 2 * thermal_zone.number_of_trip_points. It is an
+		     array consisting of tuples <lower-state upper-state> of
+		     state limits. Each trip will be associated with one state
+		     limit tuple when binding. A NULL pointer means
+		     <THERMAL_NO_LIMITS THERMAL_NO_LIMITS> on all trips.
+		     These limits are used when binding a cdev to a trip point.
+    .match:
+	    This call back returns success(0) if the 'tz and cdev' need to
 	    be bound, as per platform data.
-1.4.2 struct thermal_zone_params
+
+    ::
+
+	struct thermal_zone_params
+
     This structure defines the platform level parameters for a thermal zone.
     This data, for each thermal zone should come from the platform layer.
     This is an optional feature where some platforms can choose not to
     provide this data.
-    .governor_name: Name of the thermal governor used for this zone
-    .no_hwmon: a boolean to indicate if the thermal to hwmon sysfs interface
-               is required. when no_hwmon == false, a hwmon sysfs interface
-               will be created. when no_hwmon == true, nothing will be done.
-               In case the thermal_zone_params is NULL, the hwmon interface
-               will be created (for backward compatibility).
-    .num_tbps: Number of thermal_bind_params entries for this zone
-    .tbp: thermal_bind_params entries
+
+    .governor_name:
+	       Name of the thermal governor used for this zone
+    .no_hwmon:
+	       a boolean to indicate if the thermal to hwmon sysfs interface
+	       is required. when no_hwmon == false, a hwmon sysfs interface
+	       will be created. when no_hwmon == true, nothing will be done.
+	       In case the thermal_zone_params is NULL, the hwmon interface
+	       will be created (for backward compatibility).
+    .num_tbps:
+	       Number of thermal_bind_params entries for this zone
+    .tbp:
+	       thermal_bind_params entries
 
 2. sysfs attributes structure
+=============================
 
+==	================
 RO	read only value
 WO	write only value
 RW	read/write value
+==	================
 
 Thermal sysfs attributes will be represented under /sys/class/thermal.
 Hwmon sysfs I/F extension is also available under /sys/class/hwmon
 if hwmon is compiled in or built as a module.
 
-Thermal zone device sys I/F, created once it's registered:
-/sys/class/thermal/thermal_zone[0-*]:
+Thermal zone device sys I/F, created once it's registered::
+
+  /sys/class/thermal/thermal_zone[0-*]:
     |---type:			Type of the thermal zone
     |---temp:			Current temperature
     |---mode:			Working mode of the thermal zone
@@ -282,8 +396,9 @@ Thermal zone device sys I/F, created once it's registered:
     |---slope:                  Slope constant applied as linear extrapolation
     |---offset:                 Offset constant applied as linear extrapolation
 
-Thermal cooling device sys I/F, created once it's registered:
-/sys/class/thermal/cooling_device[0-*]:
+Thermal cooling device sys I/F, created once it's registered::
+
+  /sys/class/thermal/cooling_device[0-*]:
     |---type:			Type of the cooling device(processor/fan/...)
     |---max_state:		Maximum cooling state of the cooling device
     |---cur_state:		Current cooling state of the cooling device
@@ -299,11 +414,13 @@ the relationship between a thermal zone and its associated cooling device.
 They are created/removed for each successful execution of
 thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device.
 
-/sys/class/thermal/thermal_zone[0-*]:
+::
+
+  /sys/class/thermal/thermal_zone[0-*]:
     |---cdev[0-*]:		[0-*]th cooling device in current thermal zone
     |---cdev[0-*]_trip_point:	Trip point that cdev[0-*] is associated with
     |---cdev[0-*]_weight:       Influence of the cooling device in
-                                this thermal zone
+				this thermal zone
 
 Besides the thermal zone device sysfs I/F and cooling device sysfs I/F,
 the generic thermal driver also creates a hwmon sysfs I/F for each _type_
@@ -311,16 +428,17 @@ of thermal zone device. E.g. the generic thermal driver registers one hwmon
 class device and build the associated hwmon sysfs I/F for all the registered
 ACPI thermal zones.
 
-/sys/class/hwmon/hwmon[0-*]:
+::
+
+  /sys/class/hwmon/hwmon[0-*]:
     |---name:			The type of the thermal zone devices
     |---temp[1-*]_input:	The current temperature of thermal zone [1-*]
     |---temp[1-*]_critical:	The critical trip point of thermal zone [1-*]
 
 Please read Documentation/hwmon/sysfs-interface.rst for additional information.
 
-***************************
-* Thermal zone attributes *
-***************************
+Thermal zone attributes
+-----------------------
 
 type
 	Strings which represent the thermal zone type.
@@ -340,54 +458,67 @@ mode
 	This file gives information about the algorithm that is currently
 	managing the thermal zone. It can be either default kernel based
 	algorithm or user space application.
-	enabled		= enable Kernel Thermal management.
-	disabled	= Preventing kernel thermal zone driver actions upon
+
+	enabled
+			  enable Kernel Thermal management.
+	disabled
+			  Preventing kernel thermal zone driver actions upon
 			  trip points so that user application can take full
 			  charge of the thermal management.
+
 	RW, Optional
 
 policy
 	One of the various thermal governors used for a particular zone.
+
 	RW, Required
 
 available_policies
 	Available thermal governors which can be used for a particular zone.
+
 	RO, Required
 
-trip_point_[0-*]_temp
+`trip_point_[0-*]_temp`
 	The temperature above which trip point will be fired.
+
 	Unit: millidegree Celsius
+
 	RO, Optional
 
-trip_point_[0-*]_type
+`trip_point_[0-*]_type`
 	Strings which indicate the type of the trip point.
-	E.g. it can be one of critical, hot, passive, active[0-*] for ACPI
+
+	E.g. it can be one of critical, hot, passive, `active[0-*]` for ACPI
 	thermal zone.
+
 	RO, Optional
 
-trip_point_[0-*]_hyst
+`trip_point_[0-*]_hyst`
 	The hysteresis value for a trip point, represented as an integer
 	Unit: Celsius
 	RW, Optional
 
-cdev[0-*]
+`cdev[0-*]`
 	Sysfs link to the thermal cooling device node where the sys I/F
 	for cooling device throttling control represents.
+
 	RO, Optional
 
-cdev[0-*]_trip_point
-	The trip point in this thermal zone which cdev[0-*] is associated
+`cdev[0-*]_trip_point`
+	The trip point in this thermal zone which `cdev[0-*]` is associated
 	with; -1 means the cooling device is not associated with any trip
 	point.
+
 	RO, Optional
 
-cdev[0-*]_weight
-        The influence of cdev[0-*] in this thermal zone. This value
-        is relative to the rest of cooling devices in the thermal
-        zone. For example, if a cooling device has a weight double
-        than that of other, it's twice as effective in cooling the
-        thermal zone.
-        RW, Optional
+`cdev[0-*]_weight`
+	The influence of `cdev[0-*]` in this thermal zone. This value
+	is relative to the rest of cooling devices in the thermal
+	zone. For example, if a cooling device has a weight double
+	than that of other, it's twice as effective in cooling the
+	thermal zone.
+
+	RW, Optional
 
 passive
 	Attribute is only present for zones in which the passive cooling
@@ -395,8 +526,11 @@ passive
 	and can be set to a temperature (in millidegrees) to enable a
 	passive trip point for the zone. Activation is done by polling with
 	an interval of 1 second.
+
 	Unit: millidegrees Celsius
+
 	Valid values: 0 (disabled) or greater than 1000
+
 	RW, Optional
 
 emul_temp
@@ -407,17 +541,21 @@ emul_temp
 	threshold and its associated cooling action. This is write only node
 	and writing 0 on this node should disable emulation.
 	Unit: millidegree Celsius
+
 	WO, Optional
 
-	  WARNING: Be careful while enabling this option on production systems,
-	  because userland can easily disable the thermal policy by simply
-	  flooding this sysfs node with low temperature values.
+	  WARNING:
+	    Be careful while enabling this option on production systems,
+	    because userland can easily disable the thermal policy by simply
+	    flooding this sysfs node with low temperature values.
 
 sustainable_power
 	An estimate of the sustained power that can be dissipated by
 	the thermal zone. Used by the power allocator governor. For
-	more information see Documentation/thermal/power_allocator.txt
+	more information see Documentation/thermal/power_allocator.rst
+
 	Unit: milliwatts
+
 	RW, Optional
 
 k_po
@@ -425,7 +563,8 @@ k_po
 	controller during temperature overshoot. Temperature overshoot
 	is when the current temperature is above the "desired
 	temperature" trip point. For more information see
-	Documentation/thermal/power_allocator.txt
+	Documentation/thermal/power_allocator.rst
+
 	RW, Optional
 
 k_pu
@@ -433,20 +572,23 @@ k_pu
 	controller during temperature undershoot. Temperature undershoot
 	is when the current temperature is below the "desired
 	temperature" trip point. For more information see
-	Documentation/thermal/power_allocator.txt
+	Documentation/thermal/power_allocator.rst
+
 	RW, Optional
 
 k_i
 	The integral term of the power allocator governor's PID
 	controller. This term allows the PID controller to compensate
 	for long term drift. For more information see
-	Documentation/thermal/power_allocator.txt
+	Documentation/thermal/power_allocator.rst
+
 	RW, Optional
 
 k_d
 	The derivative term of the power allocator governor's PID
 	controller. For more information see
-	Documentation/thermal/power_allocator.txt
+	Documentation/thermal/power_allocator.rst
+
 	RW, Optional
 
 integral_cutoff
@@ -456,8 +598,10 @@ integral_cutoff
 	example, if integral_cutoff is 0, then the integral term only
 	accumulates error when temperature is above the desired
 	temperature trip point. For more information see
-	Documentation/thermal/power_allocator.txt
+	Documentation/thermal/power_allocator.rst
+
 	Unit: millidegree Celsius
+
 	RW, Optional
 
 slope
@@ -465,6 +609,7 @@ slope
 	to determine a hotspot temperature based off the sensor's
 	raw readings. It is up to the device driver to determine
 	the usage of these values.
+
 	RW, Optional
 
 offset
@@ -472,28 +617,33 @@ offset
 	to determine a hotspot temperature based off the sensor's
 	raw readings. It is up to the device driver to determine
 	the usage of these values.
+
 	RW, Optional
 
-*****************************
-* Cooling device attributes *
-*****************************
+Cooling device attributes
+-------------------------
 
 type
 	String which represents the type of device, e.g:
+
 	- for generic ACPI: should be "Fan", "Processor" or "LCD"
 	- for memory controller device on intel_menlow platform:
 	  should be "Memory controller".
+
 	RO, Required
 
 max_state
 	The maximum permissible cooling state of this cooling device.
+
 	RO, Required
 
 cur_state
 	The current cooling state of this cooling device.
 	The value can any integer numbers between 0 and max_state:
+
 	- cur_state == 0 means no cooling
 	- cur_state == max_state means the maximum cooling.
+
 	RW, Required
 
 stats/reset
@@ -508,9 +658,11 @@ stats/time_in_state_ms:
 	units here is 10mS (similar to other time exported in /proc).
 	RO, Required
 
+
 stats/total_trans:
 	A single positive value showing the total number of times the state of a
 	cooling device is changed.
+
 	RO, Required
 
 stats/trans_table:
@@ -522,6 +674,7 @@ stats/trans_table:
 	RO, Required
 
 3. A simple implementation
+==========================
 
 ACPI thermal zone may support multiple trip points like critical, hot,
 passive, active. If an ACPI thermal zone supports critical, passive,
@@ -532,11 +685,10 @@ thermal_cooling_device. Both are considered to have the same
 effectiveness in cooling the thermal zone.
 
 If the processor is listed in _PSL method, and the fan is listed in _AL0
-method, the sys I/F structure will be built like this:
+method, the sys I/F structure will be built like this::
 
-/sys/class/thermal:
-
-|thermal_zone1:
+ /sys/class/thermal:
+  |thermal_zone1:
     |---type:			acpitz
     |---temp:			37000
     |---mode:			enabled
@@ -557,24 +709,24 @@ method, the sys I/F structure will be built like this:
     |---cdev1_trip_point:	2	/* cdev1 can be used for active[0]*/
     |---cdev1_weight:           1024
 
-|cooling_device0:
+  |cooling_device0:
     |---type:			Processor
     |---max_state:		8
     |---cur_state:		0
 
-|cooling_device3:
+  |cooling_device3:
     |---type:			Fan
     |---max_state:		2
     |---cur_state:		0
 
-/sys/class/hwmon:
-
-|hwmon0:
+ /sys/class/hwmon:
+  |hwmon0:
     |---name:			acpitz
     |---temp1_input:		37000
     |---temp1_crit:		100000
 
 4. Event Notification
+=====================
 
 The framework includes a simple notification mechanism, in the form of a
 netlink event. Netlink socket initialization is done during the _init_
@@ -587,21 +739,28 @@ event will be one of:{THERMAL_AUX0, THERMAL_AUX1, THERMAL_CRITICAL,
 THERMAL_DEV_FAULT}. Notification can be sent when the current temperature
 crosses any of the configured thresholds.
 
-5. Export Symbol APIs:
+5. Export Symbol APIs
+=====================
+
+5.1. get_tz_trend
+-----------------
 
-5.1: get_tz_trend:
 This function returns the trend of a thermal zone, i.e the rate of change
 of temperature of the thermal zone. Ideally, the thermal sensor drivers
 are supposed to implement the callback. If they don't, the thermal
 framework calculated the trend by comparing the previous and the current
 temperature values.
 
-5.2:get_thermal_instance:
+5.2. get_thermal_instance
+-------------------------
+
 This function returns the thermal_instance corresponding to a given
 {thermal_zone, cooling_device, trip_point} combination. Returns NULL
 if such an instance does not exist.
 
-5.3:thermal_notify_framework:
+5.3. thermal_notify_framework
+-----------------------------
+
 This function handles the trip events from sensor drivers. It starts
 throttling the cooling devices according to the policy configured.
 For CRITICAL and HOT trip points, this notifies the respective drivers,
@@ -609,12 +768,15 @@ and does actual throttling for other trip points i.e ACTIVE and PASSIVE.
 The throttling policy is based on the configured platform data; if no
 platform data is provided, this uses the step_wise throttling policy.
 
-5.4:thermal_cdev_update:
+5.4. thermal_cdev_update
+------------------------
+
 This function serves as an arbitrator to set the state of a cooling
 device. It sets the cooling device to the deepest cooling state if
 possible.
 
-6. thermal_emergency_poweroff:
+6. thermal_emergency_poweroff
+=============================
 
 On an event of critical trip temperature crossing. Thermal framework
 allows the system to shutdown gracefully by calling orderly_poweroff().
diff --git a/Documentation/thermal/x86_pkg_temperature_thermal b/Documentation/thermal/x86_pkg_temperature_thermal.rst
similarity index 80%
rename from Documentation/thermal/x86_pkg_temperature_thermal
rename to Documentation/thermal/x86_pkg_temperature_thermal.rst
index 17a3a4c0a0ca..1bbef29df47d 100644
--- a/Documentation/thermal/x86_pkg_temperature_thermal
+++ b/Documentation/thermal/x86_pkg_temperature_thermal.rst
@@ -1,19 +1,23 @@
+===================================
 Kernel driver: x86_pkg_temp_thermal
-===================
+===================================
 
 Supported chips:
+
 * x86: with package level thermal management
+
 (Verify using: CPUID.06H:EAX[bit 6] =1)
 
 Authors: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
 
 Reference
----
+---------
+
 Intel® 64 and IA-32 Architectures Software Developer’s Manual (Jan, 2013):
 Chapter 14.6: PACKAGE LEVEL THERMAL MANAGEMENT
 
 Description
----------
+-----------
 
 This driver register CPU digital temperature package level sensor as a thermal
 zone with maximum two user mode configurable trip points. Number of trip points
@@ -25,22 +29,30 @@ take any action to control temperature.
 Threshold management
 --------------------
 Each package will register as a thermal zone under /sys/class/thermal.
-Example:
-/sys/class/thermal/thermal_zone1
+
+Example::
+
+	/sys/class/thermal/thermal_zone1
 
 This contains two trip points:
+
 - trip_point_0_temp
 - trip_point_1_temp
 
 User can set any temperature between 0 to TJ-Max temperature. Temperature units
-are in milli-degree Celsius. Refer to "Documentation/thermal/sysfs-api.txt" for
+are in milli-degree Celsius. Refer to "Documentation/thermal/sysfs-api.rst" for
 thermal sys-fs details.
 
 Any value other than 0 in these trip points, can trigger thermal notifications.
 Setting 0, stops sending thermal notifications.
 
-Thermal notifications: To get kobject-uevent notifications, set the thermal zone
-policy to "user_space". For example: echo -n "user_space" > policy
+Thermal notifications:
+To get kobject-uevent notifications, set the thermal zone
+policy to "user_space".
+
+For example::
+
+	echo -n "user_space" > policy
 
 
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 262dab70cbbf..ca1d09d0c44b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15473,7 +15473,7 @@ M:	Viresh Kumar <viresh.kumar@linaro.org>
 M:	Javi Merino <javi.merino@kernel.org>
 L:	linux-pm@vger.kernel.org
 S:	Supported
-F:	Documentation/thermal/cpu-cooling-api.txt
+F:	Documentation/thermal/cpu-cooling-api.rst
 F:	drivers/thermal/cpu_cooling.c
 F:	include/linux/cpu_cooling.h
 
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 5f4705f46c2f..b9a7a327f304 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -251,7 +251,7 @@ struct thermal_bind_params {
 	 * platform characterization. This value is relative to the
 	 * rest of the weights so a cooling device whose weight is
 	 * double that of another cooling device is twice as
-	 * effective. See Documentation/thermal/sysfs-api.txt for more
+	 * effective. See Documentation/thermal/sysfs-api.rst for more
 	 * information.
 	 */
 	int weight;
@@ -259,7 +259,7 @@ struct thermal_bind_params {
 	/*
 	 * This is a bit mask that gives the binding relation between this
 	 * thermal zone and cdev, for a particular trip point.
-	 * See Documentation/thermal/sysfs-api.txt for more information.
+	 * See Documentation/thermal/sysfs-api.rst for more information.
 	 */
 	int trip_mask;
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 75/79] docs: rapidio: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (70 preceding siblings ...)
  2019-04-22 13:28   ` [PATCH v2 74/79] docs: thermal: " Mauro Carvalho Chehab
@ 2019-04-22 13:28   ` Mauro Carvalho Chehab
  2019-04-22 13:28   ` [PATCH v2 76/79] docs: blockdev: " Mauro Carvalho Chehab
                     ` (5 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:28 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Matt Porter, Alexandre Bounine

Rename the rapidio documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/rapidio/index.rst               | 15 +++++
 .../{mport_cdev.txt => mport_cdev.rst}        | 47 ++++++-------
 .../rapidio/{rapidio.txt => rapidio.rst}      | 39 +++++++----
 .../rapidio/{rio_cm.txt => rio_cm.rst}        | 66 ++++++++++++-------
 .../rapidio/{sysfs.txt => sysfs.rst}          |  4 ++
 .../rapidio/{tsi721.txt => tsi721.rst}        | 45 ++++++++-----
 drivers/rapidio/Kconfig                       |  2 +-
 7 files changed, 141 insertions(+), 77 deletions(-)
 create mode 100644 Documentation/rapidio/index.rst
 rename Documentation/rapidio/{mport_cdev.txt => mport_cdev.rst} (84%)
 rename Documentation/rapidio/{rapidio.txt => rapidio.rst} (97%)
 rename Documentation/rapidio/{rio_cm.txt => rio_cm.rst} (76%)
 rename Documentation/rapidio/{sysfs.txt => sysfs.rst} (75%)
 rename Documentation/rapidio/{tsi721.txt => tsi721.rst} (79%)

diff --git a/Documentation/rapidio/index.rst b/Documentation/rapidio/index.rst
new file mode 100644
index 000000000000..ab7b5541b346
--- /dev/null
+++ b/Documentation/rapidio/index.rst
@@ -0,0 +1,15 @@
+:orphan:
+
+===========================
+The Linux RapidIO Subsystem
+===========================
+
+.. toctree::
+   :maxdepth: 1
+
+   rapidio
+   sysfs
+
+   tsi721
+   mport_cdev
+   rio_cm
diff --git a/Documentation/rapidio/mport_cdev.txt b/Documentation/rapidio/mport_cdev.rst
similarity index 84%
rename from Documentation/rapidio/mport_cdev.txt
rename to Documentation/rapidio/mport_cdev.rst
index a53f786ee2e9..df77a7f7be7d 100644
--- a/Documentation/rapidio/mport_cdev.txt
+++ b/Documentation/rapidio/mport_cdev.rst
@@ -1,13 +1,9 @@
+==================================================================
 RapidIO subsystem mport character device driver (rio_mport_cdev.c)
 ==================================================================
 
-Version History:
-----------------
-  1.0.0 - Initial driver release.
-
-==================================================================
-
-I. Overview
+1. Overview
+===========
 
 This device driver is the result of collaboration within the RapidIO.org
 Software Task Group (STG) between Texas Instruments, Freescale,
@@ -29,40 +25,41 @@ Using available set of ioctl commands user-space applications can perform
 following RapidIO bus and subsystem operations:
 
 - Reads and writes from/to configuration registers of mport devices
-    (RIO_MPORT_MAINT_READ_LOCAL/RIO_MPORT_MAINT_WRITE_LOCAL)
+  (RIO_MPORT_MAINT_READ_LOCAL/RIO_MPORT_MAINT_WRITE_LOCAL)
 - Reads and writes from/to configuration registers of remote RapidIO devices.
   This operations are defined as RapidIO Maintenance reads/writes in RIO spec.
-    (RIO_MPORT_MAINT_READ_REMOTE/RIO_MPORT_MAINT_WRITE_REMOTE)
+  (RIO_MPORT_MAINT_READ_REMOTE/RIO_MPORT_MAINT_WRITE_REMOTE)
 - Set RapidIO Destination ID for mport devices (RIO_MPORT_MAINT_HDID_SET)
 - Set RapidIO Component Tag for mport devices (RIO_MPORT_MAINT_COMPTAG_SET)
 - Query logical index of mport devices (RIO_MPORT_MAINT_PORT_IDX_GET)
 - Query capabilities and RapidIO link configuration of mport devices
-    (RIO_MPORT_GET_PROPERTIES)
+  (RIO_MPORT_GET_PROPERTIES)
 - Enable/Disable reporting of RapidIO doorbell events to user-space applications
-    (RIO_ENABLE_DOORBELL_RANGE/RIO_DISABLE_DOORBELL_RANGE)
+  (RIO_ENABLE_DOORBELL_RANGE/RIO_DISABLE_DOORBELL_RANGE)
 - Enable/Disable reporting of RIO port-write events to user-space applications
-    (RIO_ENABLE_PORTWRITE_RANGE/RIO_DISABLE_PORTWRITE_RANGE)
+  (RIO_ENABLE_PORTWRITE_RANGE/RIO_DISABLE_PORTWRITE_RANGE)
 - Query/Control type of events reported through this driver: doorbells,
   port-writes or both (RIO_SET_EVENT_MASK/RIO_GET_EVENT_MASK)
 - Configure/Map mport's outbound requests window(s) for specific size,
   RapidIO destination ID, hopcount and request type
-    (RIO_MAP_OUTBOUND/RIO_UNMAP_OUTBOUND)
+  (RIO_MAP_OUTBOUND/RIO_UNMAP_OUTBOUND)
 - Configure/Map mport's inbound requests window(s) for specific size,
   RapidIO base address and local memory base address
-    (RIO_MAP_INBOUND/RIO_UNMAP_INBOUND)
+  (RIO_MAP_INBOUND/RIO_UNMAP_INBOUND)
 - Allocate/Free contiguous DMA coherent memory buffer for DMA data transfers
   to/from remote RapidIO devices (RIO_ALLOC_DMA/RIO_FREE_DMA)
 - Initiate DMA data transfers to/from remote RapidIO devices (RIO_TRANSFER).
   Supports blocking, asynchronous and posted (a.k.a 'fire-and-forget') data
   transfer modes.
 - Check/Wait for completion of asynchronous DMA data transfer
-    (RIO_WAIT_FOR_ASYNC)
+  (RIO_WAIT_FOR_ASYNC)
 - Manage device objects supported by RapidIO subsystem (RIO_DEV_ADD/RIO_DEV_DEL).
   This allows implementation of various RapidIO fabric enumeration algorithms
   as user-space applications while using remaining functionality provided by
   kernel RapidIO subsystem.
 
-II. Hardware Compatibility
+2. Hardware Compatibility
+=========================
 
 This device driver uses standard interfaces defined by kernel RapidIO subsystem
 and therefore it can be used with any mport device driver registered by RapidIO
@@ -78,29 +75,35 @@ functionality of their platform when planning to use this driver:
   specific DMA engine support and therefore DMA data transfers mport_cdev driver
   are not available.
 
-III. Module parameters
+3. Module parameters
+====================
 
-- 'dma_timeout' - DMA transfer completion timeout (in msec, default value 3000).
+- 'dma_timeout'
+      - DMA transfer completion timeout (in msec, default value 3000).
         This parameter set a maximum completion wait time for SYNC mode DMA
         transfer requests and for RIO_WAIT_FOR_ASYNC ioctl requests.
 
-- 'dbg_level' - This parameter allows to control amount of debug information
+- 'dbg_level'
+      - This parameter allows to control amount of debug information
         generated by this device driver. This parameter is formed by set of
         bit masks that correspond to the specific functional blocks.
         For mask definitions see 'drivers/rapidio/devices/rio_mport_cdev.c'
         This parameter can be changed dynamically.
         Use CONFIG_RAPIDIO_DEBUG=y to enable debug output at the top level.
 
-IV. Known problems
+4. Known problems
+=================
 
   None.
 
-V. User-space Applications and API
+5. User-space Applications and API
+==================================
 
 API library and applications that use this device driver are available from
 RapidIO.org.
 
-VI. TODO List
+6. TODO List
+============
 
 - Add support for sending/receiving "raw" RapidIO messaging packets.
 - Add memory mapped DMA data transfers as an option when RapidIO-specific DMA
diff --git a/Documentation/rapidio/rapidio.txt b/Documentation/rapidio/rapidio.rst
similarity index 97%
rename from Documentation/rapidio/rapidio.txt
rename to Documentation/rapidio/rapidio.rst
index 28fbd877f85a..fb8942d3ba85 100644
--- a/Documentation/rapidio/rapidio.txt
+++ b/Documentation/rapidio/rapidio.rst
@@ -1,6 +1,6 @@
-                          The Linux RapidIO Subsystem
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+============
+Introduction
+============
 
 The RapidIO standard is a packet-based fabric interconnect standard designed for
 use in embedded systems. Development of the RapidIO standard is directed by the
@@ -11,7 +11,7 @@ This document describes the basics of the Linux RapidIO subsystem and provides
 information on its major components.
 
 1 Overview
-----------
+==========
 
 Because the RapidIO subsystem follows the Linux device model it is integrated
 into the kernel similarly to other buses by defining RapidIO-specific device and
@@ -22,7 +22,7 @@ architecture-specific interfaces that provide support for common RapidIO
 subsystem operations.
 
 2. Core Components
-------------------
+==================
 
 A typical RapidIO network is a combination of endpoints and switches.
 Each of these components is represented in the subsystem by an associated data
@@ -30,6 +30,7 @@ structure. The core logical components of the RapidIO subsystem are defined
 in include/linux/rio.h file.
 
 2.1 Master Port
+---------------
 
 A master port (or mport) is a RapidIO interface controller that is local to the
 processor executing the Linux code. A master port generates and receives RapidIO
@@ -46,6 +47,7 @@ includes rio_ops data structure which contains pointers to hardware specific
 implementations of RapidIO functions.
 
 2.2 Device
+----------
 
 A RapidIO device is any endpoint (other than mport) or switch in the network.
 All devices are presented in the RapidIO subsystem by corresponding rio_dev data
@@ -53,6 +55,7 @@ structure. Devices form one global device list and per-network device lists
 (depending on number of available mports and networks).
 
 2.3 Switch
+----------
 
 A RapidIO switch is a special class of device that routes packets between its
 ports towards their final destination. The packet destination port within a
@@ -66,6 +69,7 @@ specific switch drivers that are designed to provide hardware-specific
 implementation of common switch management routines.
 
 2.4 Network
+-----------
 
 A RapidIO network is a combination of interconnected endpoint and switch devices.
 Each RapidIO network known to the system is represented by corresponding rio_net
@@ -74,11 +78,13 @@ ports that form the same network. It also contains a pointer to the default
 master port that is used to communicate with devices within the network.
 
 2.5 Device Drivers
+------------------
 
 RapidIO device-specific drivers follow Linux Kernel Driver Model and are
 intended to support specific RapidIO devices attached to the RapidIO network.
 
 2.6 Subsystem Interfaces
+------------------------
 
 RapidIO interconnect specification defines features that may be used to provide
 one or more common service layers for all participating RapidIO devices. These
@@ -90,7 +96,7 @@ subsystem interfaces. This allows to have multiple common services attached to
 the same device without blocking attachment of a device-specific driver.
 
 3. Subsystem Initialization
----------------------------
+===========================
 
 In order to initialize the RapidIO subsystem, a platform must initialize and
 register at least one master port within the RapidIO network. To register mport
@@ -105,7 +111,7 @@ RapidIO subsystem can be configured to be built as a statically linked or
 modular component of the kernel (see details below).
 
 4. Enumeration and Discovery
-----------------------------
+============================
 
 4.1 Overview
 ------------
@@ -168,14 +174,16 @@ on RapidIO subsystem build configuration:
   (b) If the RapidIO subsystem core is built as a loadable module, in addition
   to the method shown above, the host destination ID(s) can be specified using
   traditional methods of passing module parameter "hdid=" during its loading:
+
   - from command line: "modprobe rapidio hdid=-1,7", or
   - from modprobe configuration file using configuration command "options",
     like in this example: "options rapidio hdid=-1,7". An example of modprobe
     configuration file is provided in the section below.
 
-  NOTES:
+NOTES:
   (i) if "hdid=" parameter is omitted all available mport will be assigned
   destination ID = -1;
+
   (ii) the "hdid=" parameter in systems with multiple mports can have
   destination ID assignments omitted from the end of list (default = -1).
 
@@ -317,8 +325,7 @@ must ensure that they are loaded before the enumeration/discovery starts.
 This process can be automated by specifying pre- or post- dependencies in the
 RapidIO-specific modprobe configuration file as shown in the example below.
 
-  File /etc/modprobe.d/rapidio.conf:
-  ----------------------------------
+File /etc/modprobe.d/rapidio.conf::
 
   # Configure RapidIO subsystem modules
 
@@ -335,17 +342,21 @@ RapidIO-specific modprobe configuration file as shown in the example below.
 
   --------------------------
 
-NOTE: In the example above, one of "softdep" commands must be removed or
-commented out to keep required module loading sequence.
+NOTE:
+  In the example above, one of "softdep" commands must be removed or
+  commented out to keep required module loading sequence.
 
-A. References
--------------
+5. References
+=============
 
 [1] RapidIO Trade Association. RapidIO Interconnect Specifications.
     http://www.rapidio.org.
+
 [2] Rapidio TA. Technology Comparisons.
     http://www.rapidio.org/education/technology_comparisons/
+
 [3] RapidIO support for Linux.
     http://lwn.net/Articles/139118/
+
 [4] Matt Porter. RapidIO for Linux. Ottawa Linux Symposium, 2005
     http://www.kernel.org/doc/ols/2005/ols2005v2-pages-43-56.pdf
diff --git a/Documentation/rapidio/rio_cm.txt b/Documentation/rapidio/rio_cm.rst
similarity index 76%
rename from Documentation/rapidio/rio_cm.txt
rename to Documentation/rapidio/rio_cm.rst
index 27aa401f1126..5294430a7a74 100644
--- a/Documentation/rapidio/rio_cm.txt
+++ b/Documentation/rapidio/rio_cm.rst
@@ -1,13 +1,10 @@
+==========================================================================
 RapidIO subsystem Channelized Messaging character device driver (rio_cm.c)
 ==========================================================================
 
-Version History:
-----------------
-  1.0.0 - Initial driver release.
 
-==========================================================================
-
-I. Overview
+1. Overview
+===========
 
 This device driver is the result of collaboration within the RapidIO.org
 Software Task Group (STG) between Texas Instruments, Prodrive Technologies,
@@ -41,79 +38,98 @@ in /dev directory common for all registered RapidIO mport devices.
 
 Following ioctl commands are available to user-space applications:
 
-- RIO_CM_MPORT_GET_LIST : Returns to caller list of local mport devices that
+- RIO_CM_MPORT_GET_LIST:
+    Returns to caller list of local mport devices that
     support messaging operations (number of entries up to RIO_MAX_MPORTS).
     Each list entry is combination of mport's index in the system and RapidIO
     destination ID assigned to the port.
-- RIO_CM_EP_GET_LIST_SIZE : Returns number of messaging capable remote endpoints
+- RIO_CM_EP_GET_LIST_SIZE:
+    Returns number of messaging capable remote endpoints
     in a RapidIO network associated with the specified mport device.
-- RIO_CM_EP_GET_LIST : Returns list of RapidIO destination IDs for messaging
+- RIO_CM_EP_GET_LIST:
+    Returns list of RapidIO destination IDs for messaging
     capable remote endpoints (peers) available in a RapidIO network associated
     with the specified mport device.
-- RIO_CM_CHAN_CREATE : Creates RapidIO message exchange channel data structure
+- RIO_CM_CHAN_CREATE:
+    Creates RapidIO message exchange channel data structure
     with channel ID assigned automatically or as requested by a caller.
-- RIO_CM_CHAN_BIND : Binds the specified channel data structure to the specified
+- RIO_CM_CHAN_BIND:
+    Binds the specified channel data structure to the specified
     mport device.
-- RIO_CM_CHAN_LISTEN : Enables listening for connection requests on the specified
+- RIO_CM_CHAN_LISTEN:
+    Enables listening for connection requests on the specified
     channel.
-- RIO_CM_CHAN_ACCEPT : Accepts a connection request from peer on the specified
+- RIO_CM_CHAN_ACCEPT:
+    Accepts a connection request from peer on the specified
     channel. If wait timeout for this request is specified by a caller it is
     a blocking call. If timeout set to 0 this is non-blocking call - ioctl
     handler checks for a pending connection request and if one is not available
     exits with -EGAIN error status immediately.
-- RIO_CM_CHAN_CONNECT : Sends a connection request to a remote peer/channel.
-- RIO_CM_CHAN_SEND : Sends a data message through the specified channel.
+- RIO_CM_CHAN_CONNECT:
+    Sends a connection request to a remote peer/channel.
+- RIO_CM_CHAN_SEND:
+    Sends a data message through the specified channel.
     The handler for this request assumes that message buffer specified by
     a caller includes the reserved space for a packet header required by
     this driver.
-- RIO_CM_CHAN_RECEIVE : Receives a data message through a connected channel.
+- RIO_CM_CHAN_RECEIVE:
+    Receives a data message through a connected channel.
     If the channel does not have an incoming message ready to return this ioctl
     handler will wait for new message until timeout specified by a caller
     expires. If timeout value is set to 0, ioctl handler uses a default value
     defined by MAX_SCHEDULE_TIMEOUT.
-- RIO_CM_CHAN_CLOSE : Closes a specified channel and frees associated buffers.
+- RIO_CM_CHAN_CLOSE:
+    Closes a specified channel and frees associated buffers.
     If the specified channel is in the CONNECTED state, sends close notification
     to the remote peer.
 
 The ioctl command codes and corresponding data structures intended for use by
 user-space applications are defined in 'include/uapi/linux/rio_cm_cdev.h'.
 
-II. Hardware Compatibility
+2. Hardware Compatibility
+=========================
 
 This device driver uses standard interfaces defined by kernel RapidIO subsystem
 and therefore it can be used with any mport device driver registered by RapidIO
 subsystem with limitations set by available mport HW implementation of messaging
 mailboxes.
 
-III. Module parameters
+3. Module parameters
+====================
 
-- 'dbg_level' - This parameter allows to control amount of debug information
+- 'dbg_level'
+      - This parameter allows to control amount of debug information
         generated by this device driver. This parameter is formed by set of
         bit masks that correspond to the specific functional block.
         For mask definitions see 'drivers/rapidio/devices/rio_cm.c'
         This parameter can be changed dynamically.
         Use CONFIG_RAPIDIO_DEBUG=y to enable debug output at the top level.
 
-- 'cmbox' - Number of RapidIO mailbox to use (default value is 1).
+- 'cmbox'
+      - Number of RapidIO mailbox to use (default value is 1).
         This parameter allows to set messaging mailbox number that will be used
         within entire RapidIO network. It can be used when default mailbox is
         used by other device drivers or is not supported by some nodes in the
         RapidIO network.
 
-- 'chstart' - Start channel number for dynamic assignment. Default value - 256.
+- 'chstart'
+      - Start channel number for dynamic assignment. Default value - 256.
         Allows to exclude channel numbers below this parameter from dynamic
         allocation to avoid conflicts with software components that use
         reserved predefined channel numbers.
 
-IV. Known problems
+4. Known problems
+=================
 
   None.
 
-V. User-space Applications and API Library
+5. User-space Applications and API Library
+==========================================
 
 Messaging API library and applications that use this device driver are available
 from RapidIO.org.
 
-VI. TODO List
+6. TODO List
+============
 
 - Add support for system notification messages (reserved channel 0).
diff --git a/Documentation/rapidio/sysfs.txt b/Documentation/rapidio/sysfs.rst
similarity index 75%
rename from Documentation/rapidio/sysfs.txt
rename to Documentation/rapidio/sysfs.rst
index a1adac888e6e..540f72683496 100644
--- a/Documentation/rapidio/sysfs.txt
+++ b/Documentation/rapidio/sysfs.rst
@@ -1,3 +1,7 @@
+=============
+Sysfs entries
+=============
+
 The RapidIO sysfs files have moved to:
 Documentation/ABI/testing/sysfs-bus-rapidio and
 Documentation/ABI/testing/sysfs-class-rapidio
diff --git a/Documentation/rapidio/tsi721.txt b/Documentation/rapidio/tsi721.rst
similarity index 79%
rename from Documentation/rapidio/tsi721.txt
rename to Documentation/rapidio/tsi721.rst
index cd2a2935d51d..42aea438cd20 100644
--- a/Documentation/rapidio/tsi721.txt
+++ b/Documentation/rapidio/tsi721.rst
@@ -1,7 +1,9 @@
+=========================================================================
 RapidIO subsystem mport driver for IDT Tsi721 PCI Express-to-SRIO bridge.
 =========================================================================
 
-I. Overview
+1. Overview
+===========
 
 This driver implements all currently defined RapidIO mport callback functions.
 It supports maintenance read and write operations, inbound and outbound RapidIO
@@ -17,7 +19,9 @@ into the corresponding message queue. Messaging callbacks are implemented to be
 fully compatible with RIONET driver (Ethernet over RapidIO messaging services).
 
 1. Module parameters:
-- 'dbg_level' - This parameter allows to control amount of debug information
+
+- 'dbg_level'
+      - This parameter allows to control amount of debug information
         generated by this device driver. This parameter is formed by set of
         This parameter can be changed bit masks that correspond to the specific
         functional block.
@@ -25,37 +29,44 @@ fully compatible with RIONET driver (Ethernet over RapidIO messaging services).
         This parameter can be changed dynamically.
         Use CONFIG_RAPIDIO_DEBUG=y to enable debug output at the top level.
 
-- 'dma_desc_per_channel' - This parameter defines number of hardware buffer
+- 'dma_desc_per_channel'
+      - This parameter defines number of hardware buffer
         descriptors allocated for each registered Tsi721 DMA channel.
         Its default value is 128.
 
-- 'dma_txqueue_sz' - DMA transactions queue size. Defines number of pending
+- 'dma_txqueue_sz'
+      - DMA transactions queue size. Defines number of pending
         transaction requests that can be accepted by each DMA channel.
         Default value is 16.
 
-- 'dma_sel' - DMA channel selection mask. Bitmask that defines which hardware
+- 'dma_sel'
+      - DMA channel selection mask. Bitmask that defines which hardware
         DMA channels (0 ... 6) will be registered with DmaEngine core.
         If bit is set to 1, the corresponding DMA channel will be registered.
         DMA channels not selected by this mask will not be used by this device
         driver. Default value is 0x7f (use all channels).
 
-- 'pcie_mrrs' - override value for PCIe Maximum Read Request Size (MRRS).
+- 'pcie_mrrs'
+      - override value for PCIe Maximum Read Request Size (MRRS).
         This parameter gives an ability to override MRRS value set during PCIe
         configuration process. Tsi721 supports read request sizes up to 4096B.
         Value for this parameter must be set as defined by PCIe specification:
         0 = 128B, 1 = 256B, 2 = 512B, 3 = 1024B, 4 = 2048B and 5 = 4096B.
         Default value is '-1' (= keep platform setting).
 
-- 'mbox_sel' - RIO messaging MBOX selection mask. This is a bitmask that defines
+- 'mbox_sel'
+      - RIO messaging MBOX selection mask. This is a bitmask that defines
         messaging MBOXes are managed by this device driver. Mask bits 0 - 3
         correspond to MBOX0 - MBOX3. MBOX is under driver's control if the
         corresponding bit is set to '1'. Default value is 0x0f (= all).
 
-II. Known problems
+2. Known problems
+=================
 
   None.
 
-III. DMA Engine Support
+3. DMA Engine Support
+=====================
 
 Tsi721 mport driver supports DMA data transfers between local system memory and
 remote RapidIO devices. This functionality is implemented according to SLAVE
@@ -68,17 +79,21 @@ One BDMA channel is reserved for generation of maintenance read/write requests.
 
 If Tsi721 mport driver have been built with RAPIDIO_DMA_ENGINE support included,
 this driver will accept DMA-specific module parameter:
-  "dma_desc_per_channel" - defines number of hardware buffer descriptors used by
+
+  "dma_desc_per_channel"
+			 - defines number of hardware buffer descriptors used by
                            each BDMA channel of Tsi721 (by default - 128).
 
-IV. Version History
+4. Version History
 
-  1.1.0 - DMA operations re-worked to support data scatter/gather lists larger
+  =====   ====================================================================
+  1.1.0   DMA operations re-worked to support data scatter/gather lists larger
           than hardware buffer descriptors ring.
-  1.0.0 - Initial driver release.
+  1.0.0   Initial driver release.
+  =====   ====================================================================
 
-V.  License
------------------------------------------------
+5.  License
+===========
 
   Copyright(c) 2011 Integrated Device Technology, Inc. All rights reserved.
 
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index e3d8fe41b50c..2f82bb50f8db 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -85,7 +85,7 @@ config RAPIDIO_CHMAN
 	  This option includes RapidIO channelized messaging driver which
 	  provides socket-like interface to allow sharing of single RapidIO
 	  messaging mailbox between multiple user-space applications.
-	  See "Documentation/rapidio/rio_cm.txt" for driver description.
+	  See "Documentation/rapidio/rio_cm.rst" for driver description.
 
 config RAPIDIO_MPORT_CDEV
 	tristate "RapidIO /dev mport device driver"
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 76/79] docs: blockdev: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (71 preceding siblings ...)
  2019-04-22 13:28   ` [PATCH v2 75/79] docs: rapidio: " Mauro Carvalho Chehab
@ 2019-04-22 13:28   ` Mauro Carvalho Chehab
  2019-04-22 13:28   ` [PATCH v2 77/79] docs: perf: " Mauro Carvalho Chehab
                     ` (4 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:28 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Philipp Reisner, Lars Ellenberg, Josef Bacik,
	Tim Waugh, Jens Axboe, Minchan Kim, Nitin Gupta,
	Sergey Senozhatsky, Jiri Kosina, Shuah Khan, drbd-dev,
	linux-block, nbd, linux-kselftest

Rename the blockdev documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

The drbd sub-directory contains some graphs and data flows.
Add those too to the documentation.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../admin-guide/kernel-parameters.txt         |  18 +-
 ...structure-v9.txt => data-structure-v9.rst} |   6 +-
 Documentation/blockdev/drbd/figures.rst       |  28 +++
 .../blockdev/drbd/{README.txt => index.rst}   |  15 +-
 .../blockdev/{floppy.txt => floppy.rst}       |  88 ++++----
 Documentation/blockdev/index.rst              |  16 ++
 Documentation/blockdev/{nbd.txt => nbd.rst}   |   1 +
 .../blockdev/{paride.txt => paride.rst}       | 144 +++++++------
 .../blockdev/{ramdisk.txt => ramdisk.rst}     |  55 ++---
 Documentation/blockdev/{zram.txt => zram.rst} | 195 ++++++++++++------
 MAINTAINERS                                   |   8 +-
 drivers/block/Kconfig                         |   8 +-
 drivers/block/floppy.c                        |   2 +-
 drivers/block/zram/Kconfig                    |   6 +-
 tools/testing/selftests/zram/README           |   2 +-
 15 files changed, 374 insertions(+), 218 deletions(-)
 rename Documentation/blockdev/drbd/{data-structure-v9.txt => data-structure-v9.rst} (94%)
 create mode 100644 Documentation/blockdev/drbd/figures.rst
 rename Documentation/blockdev/drbd/{README.txt => index.rst} (55%)
 rename Documentation/blockdev/{floppy.txt => floppy.rst} (81%)
 create mode 100644 Documentation/blockdev/index.rst
 rename Documentation/blockdev/{nbd.txt => nbd.rst} (96%)
 rename Documentation/blockdev/{paride.txt => paride.rst} (85%)
 rename Documentation/blockdev/{ramdisk.txt => ramdisk.rst} (84%)
 rename Documentation/blockdev/{zram.txt => zram.rst} (76%)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 65d66010b134..a6297aff5598 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1248,7 +1248,7 @@
 			See also Documentation/fault-injection/.
 
 	floppy=		[HW]
-			See Documentation/blockdev/floppy.txt.
+			See Documentation/blockdev/floppy.rst.
 
 	force_pal_cache_flush
 			[IA-64] Avoid check_sal_cache_flush which may hang on
@@ -2227,7 +2227,7 @@
 	memblock=debug	[KNL] Enable memblock debug messages.
 
 	load_ramdisk=	[RAM] List of ramdisks to load from floppy
-			See Documentation/blockdev/ramdisk.txt.
+			See Documentation/blockdev/ramdisk.rst.
 
 	lockd.nlm_grace_period=P  [NFS] Assign grace period.
 			Format: <integer>
@@ -3197,7 +3197,7 @@
 
 	pcd.		[PARIDE]
 			See header of drivers/block/paride/pcd.c.
-			See also Documentation/blockdev/paride.txt.
+			See also Documentation/blockdev/paride.rst.
 
 	pci=option[,option...]	[PCI] various PCI subsystem options.
 
@@ -3439,7 +3439,7 @@
 			needed on a platform with proper driver support.
 
 	pd.		[PARIDE]
-			See Documentation/blockdev/paride.txt.
+			See Documentation/blockdev/paride.rst.
 
 	pdcchassis=	[PARISC,HW] Disable/Enable PDC Chassis Status codes at
 			boot time.
@@ -3454,10 +3454,10 @@
 			and performance comparison.
 
 	pf.		[PARIDE]
-			See Documentation/blockdev/paride.txt.
+			See Documentation/blockdev/paride.rst.
 
 	pg.		[PARIDE]
-			See Documentation/blockdev/paride.txt.
+			See Documentation/blockdev/paride.rst.
 
 	pirq=		[SMP,APIC] Manual mp-table setup
 			See Documentation/x86/i386/IO-APIC.txt.
@@ -3569,7 +3569,7 @@
 
 	prompt_ramdisk=	[RAM] List of RAM disks to prompt for floppy disk
 			before loading.
-			See Documentation/blockdev/ramdisk.txt.
+			See Documentation/blockdev/ramdisk.rst.
 
 	psi=		[KNL] Enable or disable pressure stall information
 			tracking.
@@ -3591,7 +3591,7 @@
 	pstore.backend=	Specify the name of the pstore backend to use
 
 	pt.		[PARIDE]
-			See Documentation/blockdev/paride.txt.
+			See Documentation/blockdev/paride.rst.
 
 	pti=		[X86_64] Control Page Table Isolation of user and
 			kernel address spaces.  Disabling this feature
@@ -3620,7 +3620,7 @@
 			See Documentation/admin-guide/md.rst.
 
 	ramdisk_size=	[RAM] Sizes of RAM disks in kilobytes
-			See Documentation/blockdev/ramdisk.txt.
+			See Documentation/blockdev/ramdisk.rst.
 
 	random.trust_cpu={on,off}
 			[KNL] Enable or disable trusting the use of the
diff --git a/Documentation/blockdev/drbd/data-structure-v9.txt b/Documentation/blockdev/drbd/data-structure-v9.rst
similarity index 94%
rename from Documentation/blockdev/drbd/data-structure-v9.txt
rename to Documentation/blockdev/drbd/data-structure-v9.rst
index 1e52a0e32624..66036b901644 100644
--- a/Documentation/blockdev/drbd/data-structure-v9.txt
+++ b/Documentation/blockdev/drbd/data-structure-v9.rst
@@ -1,3 +1,7 @@
+================================
+kernel data structure for DRBD-9
+================================
+
 This describes the in kernel data structure for DRBD-9. Starting with
 Linux v3.14 we are reorganizing DRBD to use this data structure.
 
@@ -10,7 +14,7 @@ device is represented by a block device locally.
 
 The DRBD objects are interconnected to form a matrix as depicted below; a
 drbd_peer_device object sits at each intersection between a drbd_device and a
-drbd_connection:
+drbd_connection::
 
   /--------------+---------------+.....+---------------\
   |   resource   |    device     |     |    device     |
diff --git a/Documentation/blockdev/drbd/figures.rst b/Documentation/blockdev/drbd/figures.rst
new file mode 100644
index 000000000000..3e3fd4b8a478
--- /dev/null
+++ b/Documentation/blockdev/drbd/figures.rst
@@ -0,0 +1,28 @@
+.. The here included files are intended to help understand the implementation
+
+Data flows that Relate some functions, and write packets
+========================================================
+
+.. kernel-figure:: DRBD-8.3-data-packets.svg
+    :alt:   DRBD-8.3-data-packets.svg
+    :align: center
+
+.. kernel-figure:: DRBD-data-packets.svg
+    :alt:   DRBD-data-packets.svg
+    :align: center
+
+
+Sub graphs of DRBD's state transitions
+======================================
+
+.. kernel-figure:: conn-states-8.dot
+    :alt:   conn-states-8.dot
+    :align: center
+
+.. kernel-figure:: disk-states-8.dot
+    :alt:   disk-states-8.dot
+    :align: center
+
+.. kernel-figure:: node-states-8.dot
+    :alt:   node-states-8.dot
+    :align: center
diff --git a/Documentation/blockdev/drbd/README.txt b/Documentation/blockdev/drbd/index.rst
similarity index 55%
rename from Documentation/blockdev/drbd/README.txt
rename to Documentation/blockdev/drbd/index.rst
index 627b0a1bf35e..68ecd5c113e9 100644
--- a/Documentation/blockdev/drbd/README.txt
+++ b/Documentation/blockdev/drbd/index.rst
@@ -1,4 +1,9 @@
+==========================================
+Distributed Replicated Block Device - DRBD
+==========================================
+
 Description
+===========
 
   DRBD is a shared-nothing, synchronously replicated block device. It
   is designed to serve as a building block for high availability
@@ -7,10 +12,8 @@ Description
 
   Please visit http://www.drbd.org to find out more.
 
-The here included files are intended to help understand the implementation
+.. toctree::
+   :maxdepth: 1
 
-DRBD-8.3-data-packets.svg, DRBD-data-packets.svg  
-  relates some functions, and write packets.
-
-conn-states-8.dot, disk-states-8.dot, node-states-8.dot
-  The sub graphs of DRBD's state transitions
+   data-structure-v9
+   figures
diff --git a/Documentation/blockdev/floppy.txt b/Documentation/blockdev/floppy.rst
similarity index 81%
rename from Documentation/blockdev/floppy.txt
rename to Documentation/blockdev/floppy.rst
index e2240f5ab64d..4a8f31cf4139 100644
--- a/Documentation/blockdev/floppy.txt
+++ b/Documentation/blockdev/floppy.rst
@@ -1,35 +1,37 @@
-This file describes the floppy driver.
+=============
+Floppy Driver
+=============
 
 FAQ list:
 =========
 
- A FAQ list may be found in the fdutils package (see below), and also
+A FAQ list may be found in the fdutils package (see below), and also
 at <http://fdutils.linux.lu/faq.html>.
 
 
 LILO configuration options (Thinkpad users, read this)
 ======================================================
 
- The floppy driver is configured using the 'floppy=' option in
+The floppy driver is configured using the 'floppy=' option in
 lilo. This option can be typed at the boot prompt, or entered in the
 lilo configuration file.
 
- Example: If your kernel is called linux-2.6.9, type the following line
-at the lilo boot prompt (if you have a thinkpad):
+Example: If your kernel is called linux-2.6.9, type the following line
+at the lilo boot prompt (if you have a thinkpad)::
 
  linux-2.6.9 floppy=thinkpad
 
 You may also enter the following line in /etc/lilo.conf, in the description
-of linux-2.6.9:
+of linux-2.6.9::
 
  append = "floppy=thinkpad"
 
- Several floppy related options may be given, example:
+Several floppy related options may be given, example::
 
  linux-2.6.9 floppy=daring floppy=two_fdc
  append = "floppy=daring floppy=two_fdc"
 
- If you give options both in the lilo config file and on the boot
+If you give options both in the lilo config file and on the boot
 prompt, the option strings of both places are concatenated, the boot
 prompt options coming last. That's why there are also options to
 restore the default behavior.
@@ -38,21 +40,23 @@ restore the default behavior.
 Module configuration options
 ============================
 
- If you use the floppy driver as a module, use the following syntax:
-modprobe floppy floppy="<options>"
+If you use the floppy driver as a module, use the following syntax::
 
-Example:
- modprobe floppy floppy="omnibook messages"
+	modprobe floppy floppy="<options>"
 
- If you need certain options enabled every time you load the floppy driver,
-you can put:
+Example::
 
- options floppy floppy="omnibook messages"
+	modprobe floppy floppy="omnibook messages"
+
+If you need certain options enabled every time you load the floppy driver,
+you can put::
+
+	options floppy floppy="omnibook messages"
 
 in a configuration file in /etc/modprobe.d/.
 
 
- The floppy driver related options are:
+The floppy driver related options are:
 
  floppy=asus_pci
 	Sets the bit mask to allow only units 0 and 1. (default)
@@ -70,8 +74,7 @@ in a configuration file in /etc/modprobe.d/.
 	Tells the floppy driver that you have only one floppy controller.
 	(default)
 
- floppy=two_fdc
- floppy=<address>,two_fdc
+ floppy=two_fdc / floppy=<address>,two_fdc
 	Tells the floppy driver that you have two floppy controllers.
 	The second floppy controller is assumed to be at <address>.
 	This option is not needed if the second controller is at address
@@ -84,8 +87,7 @@ in a configuration file in /etc/modprobe.d/.
  floppy=0,thinkpad
 	Tells the floppy driver that you don't have a Thinkpad.
 
- floppy=omnibook
- floppy=nodma
+ floppy=omnibook / floppy=nodma
 	Tells the floppy driver not to use Dma for data transfers.
 	This is needed on HP Omnibooks, which don't have a workable
 	DMA channel for the floppy driver. This option is also useful
@@ -144,14 +146,16 @@ in a configuration file in /etc/modprobe.d/.
 	described in the physical CMOS), or if your BIOS uses
 	non-standard CMOS types. The CMOS types are:
 
-		0 - Use the value of the physical CMOS
-		1 - 5 1/4 DD
-		2 - 5 1/4 HD
-		3 - 3 1/2 DD
-		4 - 3 1/2 HD
-		5 - 3 1/2 ED
-		6 - 3 1/2 ED
-	       16 - unknown or not installed
+	       ==  ==================================
+		0  Use the value of the physical CMOS
+		1  5 1/4 DD
+		2  5 1/4 HD
+		3  3 1/2 DD
+		4  3 1/2 HD
+		5  3 1/2 ED
+		6  3 1/2 ED
+	       16  unknown or not installed
+	       ==  ==================================
 
 	(Note: there are two valid types for ED drives. This is because 5 was
 	initially chosen to represent floppy *tapes*, and 6 for ED drives.
@@ -162,8 +166,7 @@ in a configuration file in /etc/modprobe.d/.
 	Print a warning message when an unexpected interrupt is received.
 	(default)
 
- floppy=no_unexpected_interrupts
- floppy=L40SX
+ floppy=no_unexpected_interrupts / floppy=L40SX
 	Don't print a message when an unexpected interrupt is received. This
 	is needed on IBM L40SX laptops in certain video modes. (There seems
 	to be an interaction between video and floppy. The unexpected
@@ -199,47 +202,54 @@ in a configuration file in /etc/modprobe.d/.
 	Sets the floppy DMA channel to <nr> instead of 2.
 
  floppy=slow
-	Use PS/2 stepping rate:
-	 " PS/2 floppies have much slower step rates than regular floppies.
+	Use PS/2 stepping rate::
+
+	   PS/2 floppies have much slower step rates than regular floppies.
 	   It's been recommended that take about 1/4 of the default speed
-	   in some more extreme cases."
+	   in some more extreme cases.
 
 
 Supporting utilities and additional documentation:
 ==================================================
 
- Additional parameters of the floppy driver can be configured at
+Additional parameters of the floppy driver can be configured at
 runtime. Utilities which do this can be found in the fdutils package.
 This package also contains a new version of mtools which allows to
 access high capacity disks (up to 1992K on a high density 3 1/2 disk!).
 It also contains additional documentation about the floppy driver.
 
 The latest version can be found at fdutils homepage:
+
  http://fdutils.linux.lu
 
 The fdutils releases can be found at:
+
  http://fdutils.linux.lu/download.html
+
  http://www.tux.org/pub/knaff/fdutils/
+
  ftp://metalab.unc.edu/pub/Linux/utils/disk-management/
 
 Reporting problems about the floppy driver
 ==========================================
 
- If you have a question or a bug report about the floppy driver, mail
+If you have a question or a bug report about the floppy driver, mail
 me at Alain.Knaff@poboxes.com . If you post to Usenet, preferably use
 comp.os.linux.hardware. As the volume in these groups is rather high,
 be sure to include the word "floppy" (or "FLOPPY") in the subject
 line.  If the reported problem happens when mounting floppy disks, be
 sure to mention also the type of the filesystem in the subject line.
 
- Be sure to read the FAQ before mailing/posting any bug reports!
+Be sure to read the FAQ before mailing/posting any bug reports!
 
- Alain
+Alain
 
 Changelog
 =========
 
-10-30-2004 :	Cleanup, updating, add reference to module configuration.
+10-30-2004 :
+		Cleanup, updating, add reference to module configuration.
 		James Nelson <james4765@gmail.com>
 
-6-3-2000 :	Original Document
+6-3-2000 :
+		Original Document
diff --git a/Documentation/blockdev/index.rst b/Documentation/blockdev/index.rst
new file mode 100644
index 000000000000..a9af6ed8b4aa
--- /dev/null
+++ b/Documentation/blockdev/index.rst
@@ -0,0 +1,16 @@
+:orphan:
+
+===========================
+The Linux RapidIO Subsystem
+===========================
+
+.. toctree::
+   :maxdepth: 1
+
+   floppy
+   nbd
+   paride
+   ramdisk
+   zram
+
+   drbd/index
diff --git a/Documentation/blockdev/nbd.txt b/Documentation/blockdev/nbd.rst
similarity index 96%
rename from Documentation/blockdev/nbd.txt
rename to Documentation/blockdev/nbd.rst
index db242ea2bce8..db0c96e46661 100644
--- a/Documentation/blockdev/nbd.txt
+++ b/Documentation/blockdev/nbd.rst
@@ -1,3 +1,4 @@
+==================================
 Network Block Device (TCP version)
 ==================================
 
diff --git a/Documentation/blockdev/paride.txt b/Documentation/blockdev/paride.rst
similarity index 85%
rename from Documentation/blockdev/paride.txt
rename to Documentation/blockdev/paride.rst
index ee6717e3771d..b7fdd77513ab 100644
--- a/Documentation/blockdev/paride.txt
+++ b/Documentation/blockdev/paride.rst
@@ -1,9 +1,11 @@
-
-		Linux and parallel port IDE devices
+===================================
+Linux and parallel port IDE devices
+===================================
 
 PARIDE v1.03   (c) 1997-8  Grant Guenther <grant@torque.net>
 
 1. Introduction
+===============
 
 Owing to the simplicity and near universality of the parallel port interface
 to personal computers, many external devices such as portable hard-disk,
@@ -35,17 +37,17 @@ devices.  It does not cover parallel port SCSI devices, "ditto" tape
 drives or scanners.  Many different devices are supported by the 
 parallel port IDE subsystem, including:
 
-	MicroSolutions backpack CD-ROM
-	MicroSolutions backpack PD/CD
-	MicroSolutions backpack hard-drives
-	MicroSolutions backpack 8000t tape drive
-	SyQuest EZ-135, EZ-230 & SparQ drives
-	Avatar Shark
-	Imation Superdisk LS-120
-	Maxell Superdisk LS-120
-	FreeCom Power CD 
-	Hewlett-Packard 5GB and 8GB tape drives
-	Hewlett-Packard 7100 and 7200 CD-RW drives
+	- MicroSolutions backpack CD-ROM
+	- MicroSolutions backpack PD/CD
+	- MicroSolutions backpack hard-drives
+	- MicroSolutions backpack 8000t tape drive
+	- SyQuest EZ-135, EZ-230 & SparQ drives
+	- Avatar Shark
+	- Imation Superdisk LS-120
+	- Maxell Superdisk LS-120
+	- FreeCom Power CD
+	- Hewlett-Packard 5GB and 8GB tape drives
+	- Hewlett-Packard 7100 and 7200 CD-RW drives
 
 as well as most of the clone and no-name products on the market.
 
@@ -55,11 +57,13 @@ paride module which provides a registry and some common methods for
 accessing the parallel ports.  The second component is a set of 
 high-level drivers for each of the different types of supported devices: 
 
+	===	=============
 	pd	IDE disk
 	pcd	ATAPI CD-ROM
 	pf	ATAPI disk
 	pt	ATAPI tape
 	pg	ATAPI generic
+	===	=============
 
 (Currently, the pg driver is only used with CD-R drives).
 
@@ -69,6 +73,7 @@ for each of the parallel port IDE adapter chips.  Thanks to the interest
 and encouragement of Linux users from many parts of the world, 
 support is available for almost all known adapter protocols:
 
+	====    ====================================== ====
         aten    ATEN EH-100                            (HK)
         bpck    Microsolutions backpack                (US)
         comm    DataStor (old-type) "commuter" adapter (TW)
@@ -83,9 +88,11 @@ support is available for almost all known adapter protocols:
 	ktti    KT Technology PHd adapter              (SG)
         on20    OnSpec 90c20                           (US)
         on26    OnSpec 90c26                           (US)
+	====    ====================================== ====
 
 
 2. Using the PARIDE subsystem
+=============================
 
 While configuring the Linux kernel, you may choose either to build
 the PARIDE drivers into your kernel, or to build them as modules.
@@ -105,8 +112,9 @@ subsystem to try them all for you.
 For the "brand-name" products listed above, here are the protocol
 and high-level drivers that you would use:
 
+	================	============	======	========
 	Manufacturer		Model		Driver	Protocol
-	
+	================	============	======	========
 	MicroSolutions		CD-ROM		pcd	bpck
 	MicroSolutions		PD drive	pf	bpck
 	MicroSolutions		hard-drive	pd	bpck
@@ -119,8 +127,10 @@ and high-level drivers that you would use:
 	Hewlett-Packard		5GB Tape	pt	epat
 	Hewlett-Packard		7200e (CD)	pcd	epat
 	Hewlett-Packard		7200e (CD-R)	pg	epat
+	================	============	======	========
 
 2.1  Configuring built-in drivers
+---------------------------------
 
 We recommend that you get to know how the drivers work and how to
 configure them as loadable modules, before attempting to compile a
@@ -143,7 +153,7 @@ protocol identification number and, for some devices, the drive's
 chain ID.  While your system is booting, a number of messages are
 displayed on the console.  Like all such messages, they can be
 reviewed with the 'dmesg' command.  Among those messages will be
-some lines like:
+some lines like::
 
 	paride: bpck registered as protocol 0
 	paride: epat registered as protocol 1
@@ -161,7 +171,7 @@ As an example, let's assume that you have a MicroSolutions PD/CD drive
 with unit ID number 36 connected to the parallel port at 0x378, a SyQuest 
 EZ-135 connected to the chained port on the PD/CD drive and also an 
 Imation Superdisk connected to port 0x278.  You could give the following 
-options on your boot command:
+options on your boot command::
 
 	pd.drive0=0x378,1 pf.drive0=0x278,1 pf.drive1=0x378,0,36
 
@@ -175,18 +185,21 @@ PARPORT parallel port sharing system that is included by the
 if you want to use chains of devices on the same parallel port.
 
 2.2  Loading and configuring PARIDE as modules
+----------------------------------------------
 
 It is much faster and simpler to get to understand the PARIDE drivers
 if you use them as loadable kernel modules.   
 
-Note 1:  using these drivers with the "kerneld" automatic module loading
-system is not recommended for beginners, and is not documented here.  
+Note 1:
+	using these drivers with the "kerneld" automatic module loading
+	system is not recommended for beginners, and is not documented here.
 
-Note 2:  if you build PARPORT support as a loadable module, PARIDE must
-also be built as loadable modules, and PARPORT must be loaded before the
-PARIDE modules.
+Note 2:
+	if you build PARPORT support as a loadable module, PARIDE must
+	also be built as loadable modules, and PARPORT must be loaded before
+	the PARIDE modules.
 
-To use PARIDE, you must begin by 
+To use PARIDE, you must begin by::
 
 	insmod paride
 
@@ -196,7 +209,7 @@ among other tasks.
 Then, load as many of the protocol modules as you think you might need.
 As you load each module, it will register the protocols that it supports,
 and print a log message to your kernel log file and your console. For 
-example:
+example::
 
 	# insmod epat
 	paride: epat registered as protocol 0
@@ -211,7 +224,7 @@ individual co-ordinates when you load the driver.
 
 For example, if you had two no-name CD-ROM drives both using the
 KingByte KBIC-951A adapter, one on port 0x378 and the other on 0x3bc
-you could give the following command:
+you could give the following command::
 
 	# insmod pcd drive0=0x378,1 drive1=0x3bc,1
 
@@ -220,7 +233,7 @@ but check the source files in linux/drivers/block/paride for more
 information.  (Hopefully someone will write some man pages one day !).
 
 As another example, here's what happens when PARPORT is installed, and
-a SyQuest EZ-135 is attached to port 0x378:
+a SyQuest EZ-135 is attached to port 0x378::
 
 	# insmod paride
 	paride: version 1.0 installed
@@ -237,46 +250,47 @@ Note that the last line is the output from the generic partition table
 scanner - in this case it reports that it has found a disk with one partition.
 
 2.3  Using a PARIDE device
+--------------------------
 
 Once the drivers have been loaded, you can access PARIDE devices in the
 same way as their traditional counterparts.  You will probably need to
 create the device "special files".  Here is a simple script that you can
-cut to a file and execute:
+cut to a file and execute::
 
-#!/bin/bash
-#
-# mkd -- a script to create the device special files for the PARIDE subsystem
-#
-function mkdev {
-  mknod $1 $2 $3 $4 ; chmod 0660 $1 ; chown root:disk $1
-}
-#
-function pd {
-  D=$( printf \\$( printf "x%03x" $[ $1 + 97 ] ) )
-  mkdev pd$D b 45 $[ $1 * 16 ]
-  for P in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
-  do mkdev pd$D$P b 45 $[ $1 * 16 + $P ]
-  done
-}
-#
-cd /dev
-#
-for u in 0 1 2 3 ; do pd $u ; done
-for u in 0 1 2 3 ; do mkdev pcd$u b 46 $u ; done 
-for u in 0 1 2 3 ; do mkdev pf$u  b 47 $u ; done 
-for u in 0 1 2 3 ; do mkdev pt$u  c 96 $u ; done 
-for u in 0 1 2 3 ; do mkdev npt$u c 96 $[ $u + 128 ] ; done 
-for u in 0 1 2 3 ; do mkdev pg$u  c 97 $u ; done 
-#
-# end of mkd
+  #!/bin/bash
+  #
+  # mkd -- a script to create the device special files for the PARIDE subsystem
+  #
+  function mkdev {
+    mknod $1 $2 $3 $4 ; chmod 0660 $1 ; chown root:disk $1
+  }
+  #
+  function pd {
+    D=$( printf \\$( printf "x%03x" $[ $1 + 97 ] ) )
+    mkdev pd$D b 45 $[ $1 * 16 ]
+    for P in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
+    do mkdev pd$D$P b 45 $[ $1 * 16 + $P ]
+    done
+  }
+  #
+  cd /dev
+  #
+  for u in 0 1 2 3 ; do pd $u ; done
+  for u in 0 1 2 3 ; do mkdev pcd$u b 46 $u ; done
+  for u in 0 1 2 3 ; do mkdev pf$u  b 47 $u ; done
+  for u in 0 1 2 3 ; do mkdev pt$u  c 96 $u ; done
+  for u in 0 1 2 3 ; do mkdev npt$u c 96 $[ $u + 128 ] ; done
+  for u in 0 1 2 3 ; do mkdev pg$u  c 97 $u ; done
+  #
+  # end of mkd
 
 With the device files and drivers in place, you can access PARIDE devices
-like any other Linux device.   For example, to mount a CD-ROM in pcd0, use:
+like any other Linux device.   For example, to mount a CD-ROM in pcd0, use::
 
 	mount /dev/pcd0 /cdrom
 
 If you have a fresh Avatar Shark cartridge, and the drive is pda, you
-might do something like:
+might do something like::
 
 	fdisk /dev/pda		-- make a new partition table with
 				   partition 1 of type 83
@@ -289,13 +303,14 @@ might do something like:
 
 Devices like the Imation superdisk work in the same way, except that
 they do not have a partition table.  For example to make a 120MB
-floppy that you could share with a DOS system:
+floppy that you could share with a DOS system::
 
 	mkdosfs /dev/pf0
 	mount /dev/pf0 /mnt
 
 
 2.4  The pf driver
+------------------
 
 The pf driver is intended for use with parallel port ATAPI disk
 devices.  The most common devices in this category are PD drives
@@ -304,6 +319,7 @@ partitioned.  Consequently, the pf driver does not support partitioned
 media.  This may be changed in a future version of the driver. 
 
 2.5  Using the pt driver
+------------------------
 
 The pt driver for parallel port ATAPI tape drives is a minimal driver.
 It does not yet support many of the standard tape ioctl operations. 
@@ -311,6 +327,7 @@ For best performance, a block size of 32KB should be used.  You will
 probably want to set the parallel port delay to 0, if you can.
 
 2.6  Using the pg driver
+------------------------
 
 The pg driver can be used in conjunction with the cdrecord program
 to create CD-ROMs.  Please get cdrecord version 1.6.1 or later
@@ -322,8 +339,10 @@ in EPP mode, try to use "bidirectional" or "PS/2" mode and 1x speeds only.
 
 
 3. Troubleshooting
+==================
 
 3.1  Use EPP mode if you can
+----------------------------
 
 The most common problems that people report with the PARIDE drivers
 concern the parallel port CMOS settings.  At this time, none of the
@@ -332,6 +351,7 @@ If you are able to do so, please set your parallel port into EPP mode
 using your CMOS setup procedure.
 
 3.2  Check the port delay
+-------------------------
 
 Some parallel ports cannot reliably transfer data at full speed.  To
 offset the errors, the PARIDE protocol modules introduce a "port
@@ -347,6 +367,7 @@ read the comments at the beginning of the driver source files in
 linux/drivers/block/paride.
 
 3.3  Some drives need a printer reset
+-------------------------------------
 
 There appear to be a number of "noname" external drives on the market
 that do not always power up correctly.  We have noticed this with some
@@ -354,7 +375,7 @@ drives based on OnSpec and older Freecom adapters.  In these rare cases,
 the adapter can often be reinitialised by issuing a "printer reset" on
 the parallel port.  As the reset operation is potentially disruptive in 
 multiple device environments, the PARIDE drivers will not do it 
-automatically.  You can however, force a printer reset by doing:
+automatically.  You can however, force a printer reset by doing::
 
 	insmod lp reset=1
 	rmmod lp
@@ -364,6 +385,7 @@ your paride drivers as modules, and arrange to do the printer reset
 before loading the PARIDE drivers. 
 
 3.4  Use the verbose option and dmesg if you need help
+------------------------------------------------------
 
 While a lot of testing has gone into these drivers to make them work
 as smoothly as possible, problems will arise.  If you do have problems,
@@ -373,7 +395,7 @@ clues, then please make sure that only one drive is hooked to your system,
 and that either (a) PARPORT is enabled or (b) no other device driver
 is using your parallel port (check in /proc/ioports).  Then, load the
 appropriate drivers (you can load several protocol modules if you want)
-as in:
+as in::
 
 	# insmod paride
 	# insmod epat
@@ -394,12 +416,14 @@ by e-mail to grant@torque.net, or join the linux-parport mailing list
 and post your report there.
 
 3.5  For more information or help
+---------------------------------
 
 You can join the linux-parport mailing list by sending a mail message
-to 
+to:
+
 		linux-parport-request@torque.net
 
-with the single word 
+with the single word::
 
 		subscribe
 
@@ -412,6 +436,6 @@ have in your mail headers, when sending mail to the list server.
 You might also find some useful information on the linux-parport
 web pages (although they are not always up to date) at
 
-	http://web.archive.org/web/*/http://www.torque.net/parport/
+	http://web.archive.org/web/%2E/http://www.torque.net/parport/
 
 
diff --git a/Documentation/blockdev/ramdisk.txt b/Documentation/blockdev/ramdisk.rst
similarity index 84%
rename from Documentation/blockdev/ramdisk.txt
rename to Documentation/blockdev/ramdisk.rst
index 501e12e0323e..b7c2268f8dec 100644
--- a/Documentation/blockdev/ramdisk.txt
+++ b/Documentation/blockdev/ramdisk.rst
@@ -1,7 +1,8 @@
+==========================================
 Using the RAM disk block device with Linux
-------------------------------------------
+==========================================
 
-Contents:
+.. Contents:
 
 	1) Overview
 	2) Kernel Command Line Parameters
@@ -42,7 +43,7 @@ rescue floppy disk.
 2a) Kernel Command Line Parameters
 
 	ramdisk_size=N
-	==============
+		Size of the ramdisk.
 
 This parameter tells the RAM disk driver to set up RAM disks of N k size.  The
 default is 4096 (4 MB).
@@ -50,16 +51,13 @@ default is 4096 (4 MB).
 2b) Module parameters
 
 	rd_nr
-	=====
-	/dev/ramX devices created.
+		/dev/ramX devices created.
 
 	max_part
-	========
-	Maximum partition number.
+		Maximum partition number.
 
 	rd_size
-	=======
-	See ramdisk_size.
+		See ramdisk_size.
 
 3) Using "rdev -r"
 ------------------
@@ -71,11 +69,11 @@ to 2 MB (2^11) of where to find the RAM disk (this used to be the size). Bit
 prompt/wait sequence is to be given before trying to read the RAM disk. Since
 the RAM disk dynamically grows as data is being written into it, a size field
 is not required. Bits 11 to 13 are not currently used and may as well be zero.
-These numbers are no magical secrets, as seen below:
+These numbers are no magical secrets, as seen below::
 
-./arch/x86/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK     0x07FF
-./arch/x86/kernel/setup.c:#define RAMDISK_PROMPT_FLAG          0x8000
-./arch/x86/kernel/setup.c:#define RAMDISK_LOAD_FLAG            0x4000
+  ./arch/x86/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK     0x07FF
+  ./arch/x86/kernel/setup.c:#define RAMDISK_PROMPT_FLAG          0x8000
+  ./arch/x86/kernel/setup.c:#define RAMDISK_LOAD_FLAG            0x4000
 
 Consider a typical two floppy disk setup, where you will have the
 kernel on disk one, and have already put a RAM disk image onto disk #2.
@@ -92,20 +90,23 @@ sequence so that you have a chance to switch floppy disks.
 The command line equivalent is: "prompt_ramdisk=1"
 
 Putting that together gives 2^15 + 2^14 + 0 = 49152 for an rdev word.
-So to create disk one of the set, you would do:
+So to create disk one of the set, you would do::
 
 	/usr/src/linux# cat arch/x86/boot/zImage > /dev/fd0
 	/usr/src/linux# rdev /dev/fd0 /dev/fd0
 	/usr/src/linux# rdev -r /dev/fd0 49152
 
-If you make a boot disk that has LILO, then for the above, you would use:
+If you make a boot disk that has LILO, then for the above, you would use::
+
 	append = "ramdisk_start=0 load_ramdisk=1 prompt_ramdisk=1"
-Since the default start = 0 and the default prompt = 1, you could use:
+
+Since the default start = 0 and the default prompt = 1, you could use::
+
 	append = "load_ramdisk=1"
 
 
 4) An Example of Creating a Compressed RAM Disk
-----------------------------------------------
+-----------------------------------------------
 
 To create a RAM disk image, you will need a spare block device to
 construct it on. This can be the RAM disk device itself, or an
@@ -120,11 +121,11 @@ a) Decide on the RAM disk size that you want. Say 2 MB for this example.
    Create it by writing to the RAM disk device. (This step is not currently
    required, but may be in the future.) It is wise to zero out the
    area (esp. for disks) so that maximal compression is achieved for
-   the unused blocks of the image that you are about to create.
+   the unused blocks of the image that you are about to create::
 
 	dd if=/dev/zero of=/dev/ram0 bs=1k count=2048
 
-b) Make a filesystem on it. Say ext2fs for this example.
+b) Make a filesystem on it. Say ext2fs for this example::
 
 	mke2fs -vm0 /dev/ram0 2048
 
@@ -133,11 +134,11 @@ c) Mount it, copy the files you want to it (eg: /etc/* /dev/* ...)
 
 d) Compress the contents of the RAM disk. The level of compression
    will be approximately 50% of the space used by the files. Unused
-   space on the RAM disk will compress to almost nothing.
+   space on the RAM disk will compress to almost nothing::
 
 	dd if=/dev/ram0 bs=1k count=2048 | gzip -v9 > /tmp/ram_image.gz
 
-e) Put the kernel onto the floppy
+e) Put the kernel onto the floppy::
 
 	dd if=zImage of=/dev/fd0 bs=1k
 
@@ -146,13 +147,13 @@ f) Put the RAM disk image onto the floppy, after the kernel. Use an offset
    (possibly larger) kernel onto the same floppy later without overlapping
    the RAM disk image. An offset of 400 kB for kernels about 350 kB in
    size would be reasonable. Make sure offset+size of ram_image.gz is
-   not larger than the total space on your floppy (usually 1440 kB).
+   not larger than the total space on your floppy (usually 1440 kB)::
 
 	dd if=/tmp/ram_image.gz of=/dev/fd0 bs=1k seek=400
 
 g) Use "rdev" to set the boot device, RAM disk offset, prompt flag, etc.
    For prompt_ramdisk=1, load_ramdisk=1, ramdisk_start=400, one would
-   have 2^15 + 2^14 + 400 = 49552.
+   have 2^15 + 2^14 + 400 = 49552::
 
 	rdev /dev/fd0 /dev/fd0
 	rdev -r /dev/fd0 49552
@@ -160,15 +161,17 @@ g) Use "rdev" to set the boot device, RAM disk offset, prompt flag, etc.
 That is it. You now have your boot/root compressed RAM disk floppy. Some
 users may wish to combine steps (d) and (f) by using a pipe.
 
---------------------------------------------------------------------------
+
 						Paul Gortmaker 12/95
 
 Changelog:
 ----------
 
-10-22-04 :	Updated to reflect changes in command line options, remove
+10-22-04 :
+		Updated to reflect changes in command line options, remove
 		obsolete references, general cleanup.
 		James Nelson (james4765@gmail.com)
 
 
-12-95 :		Original Document
+12-95 :
+		Original Document
diff --git a/Documentation/blockdev/zram.txt b/Documentation/blockdev/zram.rst
similarity index 76%
rename from Documentation/blockdev/zram.txt
rename to Documentation/blockdev/zram.rst
index 4df0ce271085..2111231c9c0f 100644
--- a/Documentation/blockdev/zram.txt
+++ b/Documentation/blockdev/zram.rst
@@ -1,7 +1,9 @@
+========================================
 zram: Compressed RAM based block devices
-----------------------------------------
+========================================
 
-* Introduction
+Introduction
+============
 
 The zram module creates RAM based block devices named /dev/zram<id>
 (<id> = 0, 1, ...). Pages written to these disks are compressed and stored
@@ -12,9 +14,11 @@ use as swap disks, various caches under /var and maybe many more :)
 Statistics for individual zram devices are exported through sysfs nodes at
 /sys/block/zram<id>/
 
-* Usage
+Usage
+=====
 
 There are several ways to configure and manage zram device(-s):
+
 a) using zram and zram_control sysfs attributes
 b) using zramctl utility, provided by util-linux (util-linux@vger.kernel.org).
 
@@ -22,7 +26,7 @@ In this document we will describe only 'manual' zram configuration steps,
 IOW, zram and zram_control sysfs attributes.
 
 In order to get a better idea about zramctl please consult util-linux
-documentation, zramctl man-page or `zramctl --help'. Please be informed
+documentation, zramctl man-page or `zramctl --help`. Please be informed
 that zram maintainers do not develop/maintain util-linux or zramctl, should
 you have any questions please contact util-linux@vger.kernel.org
 
@@ -30,19 +34,23 @@ Following shows a typical sequence of steps for using zram.
 
 WARNING
 =======
+
 For the sake of simplicity we skip error checking parts in most of the
 examples below. However, it is your sole responsibility to handle errors.
 
 zram sysfs attributes always return negative values in case of errors.
 The list of possible return codes:
--EBUSY	-- an attempt to modify an attribute that cannot be changed once
-the device has been initialised. Please reset device first;
--ENOMEM	-- zram was not able to allocate enough memory to fulfil your
-needs;
--EINVAL	-- invalid input has been provided.
+
+========  =============================================================
+-EBUSY	  an attempt to modify an attribute that cannot be changed once
+	  the device has been initialised. Please reset device first;
+-ENOMEM	  zram was not able to allocate enough memory to fulfil your
+	  needs;
+-EINVAL	  invalid input has been provided.
+========  =============================================================
 
 If you use 'echo', the returned value that is changed by 'echo' utility,
-and, in general case, something like:
+and, in general case, something like::
 
 	echo 3 > /sys/block/zram0/max_comp_streams
 	if [ $? -ne 0 ];
@@ -51,7 +59,11 @@ and, in general case, something like:
 
 should suffice.
 
-1) Load Module:
+1) Load Module
+==============
+
+::
+
 	modprobe zram num_devices=4
 	This creates 4 devices: /dev/zram{0,1,2,3}
 
@@ -59,6 +71,8 @@ num_devices parameter is optional and tells zram how many devices should be
 pre-created. Default: 1.
 
 2) Set max number of compression streams
+========================================
+
 Regardless the value passed to this attribute, ZRAM will always
 allocate multiple compression streams - one per online CPUs - thus
 allowing several concurrent compression operations. The number of
@@ -66,16 +80,20 @@ allocated compression streams goes down when some of the CPUs
 become offline. There is no single-compression-stream mode anymore,
 unless you are running a UP system or has only 1 CPU online.
 
-To find out how many streams are currently available:
+To find out how many streams are currently available::
+
 	cat /sys/block/zram0/max_comp_streams
 
 3) Select compression algorithm
+===============================
+
 Using comp_algorithm device attribute one can see available and
 currently selected (shown in square brackets) compression algorithms,
 change selected compression algorithm (once the device is initialised
 there is no way to change compression algorithm).
 
-Examples:
+Examples::
+
 	#show supported compression algorithms
 	cat /sys/block/zram0/comp_algorithm
 	lzo [lz4]
@@ -83,20 +101,23 @@ Examples:
 	#select lzo compression algorithm
 	echo lzo > /sys/block/zram0/comp_algorithm
 
-For the time being, the `comp_algorithm' content does not necessarily
+For the time being, the `comp_algorithm` content does not necessarily
 show every compression algorithm supported by the kernel. We keep this
 list primarily to simplify device configuration and one can configure
 a new device with a compression algorithm that is not listed in
-`comp_algorithm'. The thing is that, internally, ZRAM uses Crypto API
+`comp_algorithm`. The thing is that, internally, ZRAM uses Crypto API
 and, if some of the algorithms were built as modules, it's impossible
 to list all of them using, for instance, /proc/crypto or any other
 method. This, however, has an advantage of permitting the usage of
 custom crypto compression modules (implementing S/W or H/W compression).
 
 4) Set Disksize
+===============
+
 Set disk size by writing the value to sysfs node 'disksize'.
 The value can be either in bytes or you can use mem suffixes.
-Examples:
+Examples::
+
 	# Initialize /dev/zram0 with 50MB disksize
 	echo $((50*1024*1024)) > /sys/block/zram0/disksize
 
@@ -111,10 +132,13 @@ since we expect a 2:1 compression ratio. Note that zram uses about 0.1% of the
 size of the disk when not in use so a huge zram is wasteful.
 
 5) Set memory limit: Optional
+=============================
+
 Set memory limit by writing the value to sysfs node 'mem_limit'.
 The value can be either in bytes or you can use mem suffixes.
 In addition, you could change the value in runtime.
-Examples:
+Examples::
+
 	# limit /dev/zram0 with 50MB memory
 	echo $((50*1024*1024)) > /sys/block/zram0/mem_limit
 
@@ -126,7 +150,11 @@ Examples:
 	# To disable memory limit
 	echo 0 > /sys/block/zram0/mem_limit
 
-6) Activate:
+6) Activate
+===========
+
+::
+
 	mkswap /dev/zram0
 	swapon /dev/zram0
 
@@ -134,6 +162,7 @@ Examples:
 	mount /dev/zram1 /tmp
 
 7) Add/remove zram devices
+==========================
 
 zram provides a control interface, which enables dynamic (on-demand) device
 addition and removal.
@@ -142,37 +171,44 @@ In order to add a new /dev/zramX device, perform read operation on hot_add
 attribute. This will return either new device's device id (meaning that you
 can use /dev/zram<id>) or error code.
 
-Example:
+Example::
+
 	cat /sys/class/zram-control/hot_add
 	1
 
 To remove the existing /dev/zramX device (where X is a device id)
-execute
+execute::
+
 	echo X > /sys/class/zram-control/hot_remove
 
-8) Stats:
+8) Stats
+========
+
 Per-device statistics are exported as various nodes under /sys/block/zram<id>/
 
 A brief description of exported device attributes. For more details please
 read Documentation/ABI/testing/sysfs-block-zram.
 
+======================  ======  ===============================================
 Name            	access            description
-----            	------            -----------
+======================  ======  ===============================================
 disksize          	RW	show and set the device's disk size
 initstate         	RO	shows the initialization state of the device
 reset             	WO	trigger device reset
-mem_used_max      	WO	reset the `mem_used_max' counter (see later)
-mem_limit         	WO	specifies the maximum amount of memory ZRAM can use
-				to store the compressed data
-writeback_limit   	WO	specifies the maximum amount of write IO zram can
-				write out to backing device as 4KB unit
+mem_used_max      	WO	reset the `mem_used_max` counter (see later)
+mem_limit         	WO	specifies the maximum amount of memory ZRAM can
+				use to store the compressed data
+writeback_limit   	WO	specifies the maximum amount of write IO zram
+				can write out to backing device as 4KB unit
 writeback_limit_enable  RW	show and set writeback_limit feature
-max_comp_streams  	RW	the number of possible concurrent compress operations
+max_comp_streams  	RW	the number of possible concurrent compress
+				operations
 comp_algorithm    	RW	show and change the compression algorithm
 compact           	WO	trigger memory compaction
 debug_stat        	RO	this file is used for zram debugging purposes
 backing_dev	  	RW	set up backend storage for zram to write out
 idle		  	WO	mark allocated slot as idle
+======================  ======  ===============================================
 
 
 User space is advised to use the following files to read the device statistics.
@@ -188,23 +224,31 @@ The stat file represents device's I/O statistics not accounted by block
 layer and, thus, not available in zram<id>/stat file. It consists of a
 single line of text and contains the following stats separated by
 whitespace:
- failed_reads     the number of failed reads
- failed_writes    the number of failed writes
- invalid_io       the number of non-page-size-aligned I/O requests
+
+ =============    =============================================================
+ failed_reads     The number of failed reads
+ failed_writes    The number of failed writes
+ invalid_io       The number of non-page-size-aligned I/O requests
  notify_free      Depending on device usage scenario it may account
+
                   a) the number of pages freed because of swap slot free
-                  notifications or b) the number of pages freed because of
-                  REQ_OP_DISCARD requests sent by bio. The former ones are
-                  sent to a swap block device when a swap slot is freed,
-                  which implies that this disk is being used as a swap disk.
+                     notifications
+                  b) the number of pages freed because of
+                     REQ_OP_DISCARD requests sent by bio. The former ones are
+                     sent to a swap block device when a swap slot is freed,
+                     which implies that this disk is being used as a swap disk.
+
                   The latter ones are sent by filesystem mounted with
                   discard option, whenever some data blocks are getting
                   discarded.
+ =============    =============================================================
 
 File /sys/block/zram<id>/mm_stat
 
 The stat file represents device's mm statistics. It consists of a single
 line of text and contains the following stats separated by whitespace:
+
+ ================ =============================================================
  orig_data_size   uncompressed size of data stored in this disk.
 		  This excludes same-element-filled pages (same_pages) since
 		  no memory is allocated for them.
@@ -223,58 +267,71 @@ line of text and contains the following stats separated by whitespace:
                   No memory is allocated for such pages.
  pages_compacted  the number of pages freed during compaction
  huge_pages	  the number of incompressible pages
+ ================ =============================================================
 
 File /sys/block/zram<id>/bd_stat
 
 The stat file represents device's backing device statistics. It consists of
 a single line of text and contains the following stats separated by whitespace:
+
+ ============== =============================================================
  bd_count	size of data written in backing device.
 		Unit: 4K bytes
  bd_reads	the number of reads from backing device
 		Unit: 4K bytes
  bd_writes	the number of writes to backing device
 		Unit: 4K bytes
+ ============== =============================================================
+
+9) Deactivate
+=============
+
+::
 
-9) Deactivate:
 	swapoff /dev/zram0
 	umount /dev/zram1
 
-10) Reset:
-	Write any positive value to 'reset' sysfs node
-	echo 1 > /sys/block/zram0/reset
-	echo 1 > /sys/block/zram1/reset
+10) Reset
+=========
+
+	Write any positive value to 'reset' sysfs node::
+
+		echo 1 > /sys/block/zram0/reset
+		echo 1 > /sys/block/zram1/reset
 
 	This frees all the memory allocated for the given device and
 	resets the disksize to zero. You must set the disksize again
 	before reusing the device.
 
-* Optional Feature
+Optional Feature
+================
 
-= writeback
+writeback
+---------
 
 With CONFIG_ZRAM_WRITEBACK, zram can write idle/incompressible page
 to backing storage rather than keeping it in memory.
-To use the feature, admin should set up backing device via
+To use the feature, admin should set up backing device via::
 
-	"echo /dev/sda5 > /sys/block/zramX/backing_dev"
+	echo /dev/sda5 > /sys/block/zramX/backing_dev
 
 before disksize setting. It supports only partition at this moment.
-If admin want to use incompressible page writeback, they could do via
+If admin want to use incompressible page writeback, they could do via::
 
-	"echo huge > /sys/block/zramX/write"
+	echo huge > /sys/block/zramX/write
 
 To use idle page writeback, first, user need to declare zram pages
-as idle.
+as idle::
 
-	"echo all > /sys/block/zramX/idle"
+	echo all > /sys/block/zramX/idle
 
 From now on, any pages on zram are idle pages. The idle mark
 will be removed until someone request access of the block.
 IOW, unless there is access request, those pages are still idle pages.
 
-Admin can request writeback of those idle pages at right timing via
+Admin can request writeback of those idle pages at right timing via::
 
-	"echo idle > /sys/block/zramX/writeback"
+	echo idle > /sys/block/zramX/writeback
 
 With the command, zram writeback idle pages from memory to the storage.
 
@@ -285,7 +342,7 @@ to guarantee storage health for entire product life.
 To overcome the concern, zram supports "writeback_limit" feature.
 The "writeback_limit_enable"'s default value is 0 so that it doesn't limit
 any writeback. IOW, if admin want to apply writeback budget, he should
-enable writeback_limit_enable via
+enable writeback_limit_enable via::
 
 	$ echo 1 > /sys/block/zramX/writeback_limit_enable
 
@@ -296,7 +353,7 @@ until admin set the budget via /sys/block/zramX/writeback_limit.
 assigned via /sys/block/zramX/writeback_limit is meaninless.)
 
 If admin want to limit writeback as per-day 400M, he could do it
-like below.
+like below::
 
 	$ MB_SHIFT=20
 	$ 4K_SHIFT=12
@@ -305,16 +362,16 @@ like below.
 	$ echo 1 > /sys/block/zram0/writeback_limit_enable
 
 If admin want to allow further write again once the bugdet is exausted,
-he could do it like below
+he could do it like below::
 
 	$ echo $((400<<MB_SHIFT>>4K_SHIFT)) > \
 		/sys/block/zram0/writeback_limit
 
-If admin want to see remaining writeback budget since he set,
+If admin want to see remaining writeback budget since he set::
 
 	$ cat /sys/block/zramX/writeback_limit
 
-If admin want to disable writeback limit, he could do
+If admin want to disable writeback limit, he could do::
 
 	$ echo 0 > /sys/block/zramX/writeback_limit_enable
 
@@ -326,25 +383,35 @@ budget in next setting is user's job.
 If admin want to measure writeback count in a certain period, he could
 know it via /sys/block/zram0/bd_stat's 3rd column.
 
-= memory tracking
+memory tracking
+===============
 
 With CONFIG_ZRAM_MEMORY_TRACKING, user can know information of the
 zram block. It could be useful to catch cold or incompressible
 pages of the process with*pagemap.
+
 If you enable the feature, you could see block state via
-/sys/kernel/debug/zram/zram0/block_state". The output is as follows,
+/sys/kernel/debug/zram/zram0/block_state". The output is as follows::
 
 	  300    75.033841 .wh.
 	  301    63.806904 s...
 	  302    63.806919 ..hi
 
-First column is zram's block index.
-Second column is access time since the system was booted
-Third column is state of the block.
-(s: same page
-w: written page to backing store
-h: huge page
-i: idle page)
+First column
+	zram's block index.
+Second column
+	access time since the system was booted
+Third column
+	state of the block:
+
+	s:
+		same page
+	w:
+		written page to backing store
+	h:
+		huge page
+	i:
+		idle page
 
 First line of above example says 300th block is accessed at 75.033841sec
 and the block's state is huge so it is written back to the backing
diff --git a/MAINTAINERS b/MAINTAINERS
index ca1d09d0c44b..3ed27c0c36d8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10823,7 +10823,7 @@ M:	Josef Bacik <josef@toxicpanda.com>
 S:	Maintained
 L:	linux-block@vger.kernel.org
 L:	nbd@other.debian.org
-F:	Documentation/blockdev/nbd.txt
+F:	Documentation/blockdev/nbd.rst
 F:	drivers/block/nbd.c
 F:	include/uapi/linux/nbd.h
 
@@ -11801,7 +11801,7 @@ PARIDE DRIVERS FOR PARALLEL PORT IDE DEVICES
 M:	Tim Waugh <tim@cyberelk.net>
 L:	linux-parport@lists.infradead.org (subscribers-only)
 S:	Maintained
-F:	Documentation/blockdev/paride.txt
+F:	Documentation/blockdev/paride.rst
 F:	drivers/block/paride/
 
 PARISC ARCHITECTURE
@@ -13077,7 +13077,7 @@ F:	drivers/net/wireless/ralink/rt2x00/
 RAMDISK RAM BLOCK DEVICE DRIVER
 M:	Jens Axboe <axboe@kernel.dk>
 S:	Maintained
-F:	Documentation/blockdev/ramdisk.txt
+F:	Documentation/blockdev/ramdisk.rst
 F:	drivers/block/brd.c
 
 RANCHU VIRTUAL BOARD FOR MIPS
@@ -17360,7 +17360,7 @@ R:	Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/block/zram/
-F:	Documentation/blockdev/zram.txt
+F:	Documentation/blockdev/zram.rst
 
 ZS DECSTATION Z85C30 SERIAL DRIVER
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 96ec7e0fc1ea..c43690b973d8 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -31,7 +31,7 @@ config BLK_DEV_FD
 	  If you want to use the floppy disk drive(s) of your PC under Linux,
 	  say Y. Information about this driver, especially important for IBM
 	  Thinkpad users, is contained in
-	  <file:Documentation/blockdev/floppy.txt>.
+	  <file:Documentation/blockdev/floppy.rst>.
 	  That file also contains the location of the Floppy driver FAQ as
 	  well as location of the fdutils package used to configure additional
 	  parameters of the driver at run time.
@@ -96,7 +96,7 @@ config PARIDE
 	  your computer's parallel port. Most of them are actually IDE devices
 	  using a parallel port IDE adapter. This option enables the PARIDE
 	  subsystem which contains drivers for many of these external drives.
-	  Read <file:Documentation/blockdev/paride.txt> for more information.
+	  Read <file:Documentation/blockdev/paride.rst> for more information.
 
 	  If you have said Y to the "Parallel-port support" configuration
 	  option, you may share a single port between your printer and other
@@ -261,7 +261,7 @@ config BLK_DEV_NBD
 	  userland (making server and client physically the same computer,
 	  communicating using the loopback network device).
 
-	  Read <file:Documentation/blockdev/nbd.txt> for more information,
+	  Read <file:Documentation/blockdev/nbd.rst> for more information,
 	  especially about where to find the server code, which runs in user
 	  space and does not need special kernel support.
 
@@ -303,7 +303,7 @@ config BLK_DEV_RAM
 	  during the initial install of Linux.
 
 	  Note that the kernel command line option "ramdisk=XX" is now obsolete.
-	  For details, read <file:Documentation/blockdev/ramdisk.txt>.
+	  For details, read <file:Documentation/blockdev/ramdisk.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called brd. An alias "rd" has been defined
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index b8998abd86a5..14701be9f916 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4423,7 +4423,7 @@ static int __init floppy_setup(char *str)
 		pr_cont("\n");
 	} else
 		DPRINT("botched floppy option\n");
-	DPRINT("Read Documentation/blockdev/floppy.txt\n");
+	DPRINT("Read Documentation/blockdev/floppy.rst\n");
 	return 0;
 }
 
diff --git a/drivers/block/zram/Kconfig b/drivers/block/zram/Kconfig
index 1ffc64770643..e06b99d54816 100644
--- a/drivers/block/zram/Kconfig
+++ b/drivers/block/zram/Kconfig
@@ -12,7 +12,7 @@ config ZRAM
 	  It has several use cases, for example: /tmp storage, use as swap
 	  disks and maybe many more.
 
-	  See Documentation/blockdev/zram.txt for more information.
+	  See Documentation/blockdev/zram.rst for more information.
 
 config ZRAM_WRITEBACK
        bool "Write back incompressible or idle page to backing device"
@@ -26,7 +26,7 @@ config ZRAM_WRITEBACK
 	 With /sys/block/zramX/{idle,writeback}, application could ask
 	 idle page's writeback to the backing device to save in memory.
 
-	 See Documentation/blockdev/zram.txt for more information.
+	 See Documentation/blockdev/zram.rst for more information.
 
 config ZRAM_MEMORY_TRACKING
 	bool "Track zRam block status"
@@ -36,4 +36,4 @@ config ZRAM_MEMORY_TRACKING
 	  of zRAM. Admin could see the information via
 	  /sys/kernel/debug/zram/zramX/block_state.
 
-	  See Documentation/blockdev/zram.txt for more information.
+	  See Documentation/blockdev/zram.rst for more information.
diff --git a/tools/testing/selftests/zram/README b/tools/testing/selftests/zram/README
index 7972cc512408..5fa378391d3b 100644
--- a/tools/testing/selftests/zram/README
+++ b/tools/testing/selftests/zram/README
@@ -37,4 +37,4 @@ Commands required for testing:
  - mkfs/ mkfs.ext4
 
 For more information please refer:
-kernel-source-tree/Documentation/blockdev/zram.txt
+kernel-source-tree/Documentation/blockdev/zram.rst
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 77/79] docs: perf: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (72 preceding siblings ...)
  2019-04-22 13:28   ` [PATCH v2 76/79] docs: blockdev: " Mauro Carvalho Chehab
@ 2019-04-22 13:28   ` Mauro Carvalho Chehab
  2019-04-22 13:28   ` [PATCH v2 78/79] docs: sysctl: " Mauro Carvalho Chehab
                     ` (3 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:28 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Shaokun Zhang, Khuong Dinh, Andy Gross,
	David Brown, Will Deacon, Mark Rutland, linux-arm-msm,
	linux-arm-kernel

Rename the perf documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../perf/{arm-ccn.txt => arm-ccn.rst}         | 18 +++++-----
 .../perf/{arm_dsu_pmu.txt => arm_dsu_pmu.rst} |  5 +--
 .../perf/{hisi-pmu.txt => hisi-pmu.rst}       | 35 +++++++++++--------
 Documentation/perf/index.rst                  | 16 +++++++++
 .../perf/{qcom_l2_pmu.txt => qcom_l2_pmu.rst} |  3 +-
 .../perf/{qcom_l3_pmu.txt => qcom_l3_pmu.rst} |  3 +-
 .../{thunderx2-pmu.txt => thunderx2-pmu.rst}  | 25 ++++++-------
 .../perf/{xgene-pmu.txt => xgene-pmu.rst}     |  3 +-
 MAINTAINERS                                   |  4 +--
 drivers/perf/qcom_l3_pmu.c                    |  2 +-
 10 files changed, 72 insertions(+), 42 deletions(-)
 rename Documentation/perf/{arm-ccn.txt => arm-ccn.rst} (86%)
 rename Documentation/perf/{arm_dsu_pmu.txt => arm_dsu_pmu.rst} (92%)
 rename Documentation/perf/{hisi-pmu.txt => hisi-pmu.rst} (73%)
 create mode 100644 Documentation/perf/index.rst
 rename Documentation/perf/{qcom_l2_pmu.txt => qcom_l2_pmu.rst} (94%)
 rename Documentation/perf/{qcom_l3_pmu.txt => qcom_l3_pmu.rst} (93%)
 rename Documentation/perf/{thunderx2-pmu.txt => thunderx2-pmu.rst} (73%)
 rename Documentation/perf/{xgene-pmu.txt => xgene-pmu.rst} (96%)

diff --git a/Documentation/perf/arm-ccn.txt b/Documentation/perf/arm-ccn.rst
similarity index 86%
rename from Documentation/perf/arm-ccn.txt
rename to Documentation/perf/arm-ccn.rst
index 15cdb7bc57c3..832b0c64023a 100644
--- a/Documentation/perf/arm-ccn.txt
+++ b/Documentation/perf/arm-ccn.rst
@@ -1,3 +1,4 @@
+==========================
 ARM Cache Coherent Network
 ==========================
 
@@ -29,6 +30,7 @@ Crosspoint watchpoint-based events (special "event" value 0xfe)
 require "xp" and "vc" as as above plus "port" (device port index),
 "dir" (transmit/receive direction), comparator values ("cmp_l"
 and "cmp_h") and "mask", being index of the comparator mask.
+
 Masks are defined separately from the event description
 (due to limited number of the config values) in the "cmp_mask"
 directory, with first 8 configurable by user and additional
@@ -44,16 +46,16 @@ request the events on this processor (if not, the perf_event->cpu value
 will be overwritten anyway). In case of this processor being offlined,
 the events are migrated to another one and the attribute is updated.
 
-Example of perf tool use:
+Example of perf tool use::
 
-/ # perf list | grep ccn
-  ccn/cycles/                                        [Kernel PMU event]
-<...>
-  ccn/xp_valid_flit,xp=?,port=?,vc=?,dir=?/          [Kernel PMU event]
-<...>
+  / # perf list | grep ccn
+    ccn/cycles/                                        [Kernel PMU event]
+  <...>
+    ccn/xp_valid_flit,xp=?,port=?,vc=?,dir=?/          [Kernel PMU event]
+  <...>
 
-/ # perf stat -a -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
-                                                                       sleep 1
+  / # perf stat -a -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
+                                                                         sleep 1
 
 The driver does not support sampling, therefore "perf record" will
 not work. Per-task (without "-a") perf sessions are not supported.
diff --git a/Documentation/perf/arm_dsu_pmu.txt b/Documentation/perf/arm_dsu_pmu.rst
similarity index 92%
rename from Documentation/perf/arm_dsu_pmu.txt
rename to Documentation/perf/arm_dsu_pmu.rst
index d611e15f5add..7fd34db75d13 100644
--- a/Documentation/perf/arm_dsu_pmu.txt
+++ b/Documentation/perf/arm_dsu_pmu.rst
@@ -1,3 +1,4 @@
+==================================
 ARM DynamIQ Shared Unit (DSU) PMU
 ==================================
 
@@ -13,7 +14,7 @@ PMU doesn't support process specific events and cannot be used in sampling mode.
 The DSU provides a bitmap for a subset of implemented events via hardware
 registers. There is no way for the driver to determine if the other events
 are available or not. Hence the driver exposes only those events advertised
-by the DSU, in "events" directory under :
+by the DSU, in "events" directory under::
 
   /sys/bus/event_sources/devices/arm_dsu_<N>/
 
@@ -23,6 +24,6 @@ and use the raw event code for the unlisted events.
 The driver also exposes the CPUs connected to the DSU instance in "associated_cpus".
 
 
-e.g usage :
+e.g usage::
 
 	perf stat -a -e arm_dsu_0/cycles/
diff --git a/Documentation/perf/hisi-pmu.txt b/Documentation/perf/hisi-pmu.rst
similarity index 73%
rename from Documentation/perf/hisi-pmu.txt
rename to Documentation/perf/hisi-pmu.rst
index 267a028b2741..404a5c3d9d00 100644
--- a/Documentation/perf/hisi-pmu.txt
+++ b/Documentation/perf/hisi-pmu.rst
@@ -1,5 +1,7 @@
+======================================================
 HiSilicon SoC uncore Performance Monitoring Unit (PMU)
 ======================================================
+
 The HiSilicon SoC chip includes various independent system device PMUs
 such as L3 cache (L3C), Hydra Home Agent (HHA) and DDRC. These PMUs are
 independent and have hardware logic to gather statistics and performance
@@ -11,11 +13,13 @@ called Super CPU cluster (SCCL) and is made up of 6 CCLs. Each SCCL has
 two HHAs (0 - 1) and four DDRCs (0 - 3), respectively.
 
 HiSilicon SoC uncore PMU driver
----------------------------------------
+-------------------------------
+
 Each device PMU has separate registers for event counting, control and
 interrupt, and the PMU driver shall register perf PMU drivers like L3C,
 HHA and DDRC etc. The available events and configuration options shall
-be described in the sysfs, see :
+be described in the sysfs, see:
+
 /sys/devices/hisi_sccl{X}_<l3c{Y}/hha{Y}/ddrc{Y}>/, or
 /sys/bus/event_source/devices/hisi_sccl{X}_<l3c{Y}/hha{Y}/ddrc{Y}>.
 The "perf list" command shall list the available events from sysfs.
@@ -24,27 +28,30 @@ Each L3C, HHA and DDRC is registered as a separate PMU with perf. The PMU
 name will appear in event listing as hisi_sccl<sccl-id>_module<index-id>.
 where "sccl-id" is the identifier of the SCCL and "index-id" is the index of
 module.
+
 e.g. hisi_sccl3_l3c0/rd_hit_cpipe is READ_HIT_CPIPE event of L3C index #0 in
 SCCL ID #3.
+
 e.g. hisi_sccl1_hha0/rx_operations is RX_OPERATIONS event of HHA index #0 in
 SCCL ID #1.
 
 The driver also provides a "cpumask" sysfs attribute, which shows the CPU core
 ID used to count the uncore PMU event.
 
-Example usage of perf:
-$# perf list
-hisi_sccl3_l3c0/rd_hit_cpipe/ [kernel PMU event]
-------------------------------------------
-hisi_sccl3_l3c0/wr_hit_cpipe/ [kernel PMU event]
-------------------------------------------
-hisi_sccl1_l3c0/rd_hit_cpipe/ [kernel PMU event]
-------------------------------------------
-hisi_sccl1_l3c0/wr_hit_cpipe/ [kernel PMU event]
-------------------------------------------
+Example usage of perf::
 
-$# perf stat -a -e hisi_sccl3_l3c0/rd_hit_cpipe/ sleep 5
-$# perf stat -a -e hisi_sccl3_l3c0/config=0x02/ sleep 5
+  $# perf list
+  hisi_sccl3_l3c0/rd_hit_cpipe/ [kernel PMU event]
+  ------------------------------------------
+  hisi_sccl3_l3c0/wr_hit_cpipe/ [kernel PMU event]
+  ------------------------------------------
+  hisi_sccl1_l3c0/rd_hit_cpipe/ [kernel PMU event]
+  ------------------------------------------
+  hisi_sccl1_l3c0/wr_hit_cpipe/ [kernel PMU event]
+  ------------------------------------------
+
+  $# perf stat -a -e hisi_sccl3_l3c0/rd_hit_cpipe/ sleep 5
+  $# perf stat -a -e hisi_sccl3_l3c0/config=0x02/ sleep 5
 
 The current driver does not support sampling. So "perf record" is unsupported.
 Also attach to a task is unsupported as the events are all uncore.
diff --git a/Documentation/perf/index.rst b/Documentation/perf/index.rst
new file mode 100644
index 000000000000..4bf848e27f26
--- /dev/null
+++ b/Documentation/perf/index.rst
@@ -0,0 +1,16 @@
+:orphan:
+
+===========================
+Performance monitor support
+===========================
+
+.. toctree::
+   :maxdepth: 1
+
+   hisi-pmu
+   qcom_l2_pmu
+   qcom_l3_pmu
+   arm-ccn
+   xgene-pmu
+   arm_dsu_pmu
+   thunderx2-pmu
diff --git a/Documentation/perf/qcom_l2_pmu.txt b/Documentation/perf/qcom_l2_pmu.rst
similarity index 94%
rename from Documentation/perf/qcom_l2_pmu.txt
rename to Documentation/perf/qcom_l2_pmu.rst
index b25b97659ab9..c130178a4a55 100644
--- a/Documentation/perf/qcom_l2_pmu.txt
+++ b/Documentation/perf/qcom_l2_pmu.rst
@@ -1,3 +1,4 @@
+=====================================================================
 Qualcomm Technologies Level-2 Cache Performance Monitoring Unit (PMU)
 =====================================================================
 
@@ -28,7 +29,7 @@ The driver provides a "cpumask" sysfs attribute which contains a mask
 consisting of one CPU per cluster which will be used to handle all the PMU
 events on that cluster.
 
-Examples for use with perf:
+Examples for use with perf::
 
   perf stat -e l2cache_0/config=0x001/,l2cache_0/config=0x042/ -a sleep 1
 
diff --git a/Documentation/perf/qcom_l3_pmu.txt b/Documentation/perf/qcom_l3_pmu.rst
similarity index 93%
rename from Documentation/perf/qcom_l3_pmu.txt
rename to Documentation/perf/qcom_l3_pmu.rst
index 96b3a9444a0d..a3d014a46bfd 100644
--- a/Documentation/perf/qcom_l3_pmu.txt
+++ b/Documentation/perf/qcom_l3_pmu.rst
@@ -1,3 +1,4 @@
+===========================================================================
 Qualcomm Datacenter Technologies L3 Cache Performance Monitoring Unit (PMU)
 ===========================================================================
 
@@ -17,7 +18,7 @@ The hardware implements 32bit event counters and has a flat 8bit event space
 exposed via the "event" format attribute. In addition to the 32bit physical
 counters the driver supports virtual 64bit hardware counters by using hardware
 counter chaining. This feature is exposed via the "lc" (long counter) format
-flag. E.g.:
+flag. E.g.::
 
   perf stat -e l3cache_0_0/read-miss,lc/
 
diff --git a/Documentation/perf/thunderx2-pmu.txt b/Documentation/perf/thunderx2-pmu.rst
similarity index 73%
rename from Documentation/perf/thunderx2-pmu.txt
rename to Documentation/perf/thunderx2-pmu.rst
index dffc57143736..08e33675853a 100644
--- a/Documentation/perf/thunderx2-pmu.txt
+++ b/Documentation/perf/thunderx2-pmu.rst
@@ -1,3 +1,4 @@
+=============================================================
 Cavium ThunderX2 SoC Performance Monitoring Unit (PMU UNCORE)
 =============================================================
 
@@ -24,18 +25,18 @@ and configuration options under sysfs, see
 The driver does not support sampling, therefore "perf record" will not
 work. Per-task perf sessions are also not supported.
 
-Examples:
+Examples::
 
-# perf stat -a -e uncore_dmc_0/cnt_cycles/ sleep 1
+  # perf stat -a -e uncore_dmc_0/cnt_cycles/ sleep 1
 
-# perf stat -a -e \
-uncore_dmc_0/cnt_cycles/,\
-uncore_dmc_0/data_transfers/,\
-uncore_dmc_0/read_txns/,\
-uncore_dmc_0/write_txns/ sleep 1
+  # perf stat -a -e \
+  uncore_dmc_0/cnt_cycles/,\
+  uncore_dmc_0/data_transfers/,\
+  uncore_dmc_0/read_txns/,\
+  uncore_dmc_0/write_txns/ sleep 1
 
-# perf stat -a -e \
-uncore_l3c_0/read_request/,\
-uncore_l3c_0/read_hit/,\
-uncore_l3c_0/inv_request/,\
-uncore_l3c_0/inv_hit/ sleep 1
+  # perf stat -a -e \
+  uncore_l3c_0/read_request/,\
+  uncore_l3c_0/read_hit/,\
+  uncore_l3c_0/inv_request/,\
+  uncore_l3c_0/inv_hit/ sleep 1
diff --git a/Documentation/perf/xgene-pmu.txt b/Documentation/perf/xgene-pmu.rst
similarity index 96%
rename from Documentation/perf/xgene-pmu.txt
rename to Documentation/perf/xgene-pmu.rst
index d7cff4454e5b..644f8ed89152 100644
--- a/Documentation/perf/xgene-pmu.txt
+++ b/Documentation/perf/xgene-pmu.rst
@@ -1,3 +1,4 @@
+================================================
 APM X-Gene SoC Performance Monitoring Unit (PMU)
 ================================================
 
@@ -33,7 +34,7 @@ each PMU, please refer to APM X-Gene User Manual.
 Each perf driver also provides a "cpumask" sysfs attribute, which contains a
 single CPU ID of the processor which will be used to handle all the PMU events.
 
-Example for perf tool use:
+Example for perf tool use::
 
  / # perf list | grep -e l3c -e iob -e mcb -e mc
    l3c0/ackq-full/                                    [Kernel PMU event]
diff --git a/MAINTAINERS b/MAINTAINERS
index 3ed27c0c36d8..68d0070d18b6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1102,7 +1102,7 @@ APPLIED MICRO (APM) X-GENE SOC PMU
 M:	Khuong Dinh <khuong@os.amperecomputing.com>
 S:	Supported
 F:	drivers/perf/xgene_pmu.c
-F:	Documentation/perf/xgene-pmu.txt
+F:	Documentation/perf/xgene-pmu.rst
 F:	Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
 
 APTINA CAMERA SENSOR PLL
@@ -7082,7 +7082,7 @@ M:	Shaokun Zhang <zhangshaokun@hisilicon.com>
 W:	http://www.hisilicon.com
 S:	Supported
 F:	drivers/perf/hisilicon
-F:	Documentation/perf/hisi-pmu.txt
+F:	Documentation/perf/hisi-pmu.rst
 
 HISILICON ROCE DRIVER
 M:	Lijun Ou <oulijun@huawei.com>
diff --git a/drivers/perf/qcom_l3_pmu.c b/drivers/perf/qcom_l3_pmu.c
index 5d70646da8c7..bb5af9503084 100644
--- a/drivers/perf/qcom_l3_pmu.c
+++ b/drivers/perf/qcom_l3_pmu.c
@@ -7,7 +7,7 @@
  * the slices. User space needs to aggregate to individual counts to provide
  * a global picture.
  *
- * See Documentation/perf/qcom_l3_pmu.txt for more details.
+ * See Documentation/perf/qcom_l3_pmu.rst for more details.
  *
  * Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
  *
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 78/79] docs: sysctl: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (73 preceding siblings ...)
  2019-04-22 13:28   ` [PATCH v2 77/79] docs: perf: " Mauro Carvalho Chehab
@ 2019-04-22 13:28   ` Mauro Carvalho Chehab
  2019-04-22 13:28   ` [PATCH v2 79/79] docs: block: " Mauro Carvalho Chehab
                     ` (2 subsequent siblings)
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:28 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, David S. Miller, netdev, linux-mm

Rename the /proc/sys/ documentation files to ReST, using the
README file as a template for an index.rst, adding the other
files there via TOC markup.

Despite being written on different times with different
styles, try to make them somewhat coherent with a similar
look and feel, ensuring that they'll look nice as both
raw text file and as via the html output produced by the
Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../admin-guide/kernel-parameters.txt         |   2 +-
 Documentation/admin-guide/mm/index.rst        |   2 +-
 Documentation/admin-guide/mm/ksm.rst          |   2 +-
 Documentation/core-api/printk-formats.rst     |   2 +-
 Documentation/networking/ip-sysctl.txt        |   2 +-
 Documentation/sysctl/abi.rst                  |  67 ++++
 Documentation/sysctl/abi.txt                  |  54 ---
 Documentation/sysctl/{fs.txt => fs.rst}       | 141 ++++---
 Documentation/sysctl/{README => index.rst}    |  36 +-
 .../sysctl/{kernel.txt => kernel.rst}         | 374 ++++++++++--------
 Documentation/sysctl/{net.txt => net.rst}     | 141 ++++---
 .../sysctl/{sunrpc.txt => sunrpc.rst}         |  13 +-
 Documentation/sysctl/{user.txt => user.rst}   |  32 +-
 Documentation/sysctl/{vm.txt => vm.rst}       | 258 ++++++------
 Documentation/vm/unevictable-lru.rst          |   2 +-
 kernel/panic.c                                |   2 +-
 mm/swap.c                                     |   2 +-
 17 files changed, 651 insertions(+), 481 deletions(-)
 create mode 100644 Documentation/sysctl/abi.rst
 delete mode 100644 Documentation/sysctl/abi.txt
 rename Documentation/sysctl/{fs.txt => fs.rst} (77%)
 rename Documentation/sysctl/{README => index.rst} (78%)
 rename Documentation/sysctl/{kernel.txt => kernel.rst} (79%)
 rename Documentation/sysctl/{net.txt => net.rst} (85%)
 rename Documentation/sysctl/{sunrpc.txt => sunrpc.rst} (62%)
 rename Documentation/sysctl/{user.txt => user.rst} (77%)
 rename Documentation/sysctl/{vm.txt => vm.rst} (85%)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index a6297aff5598..30689c08bdc3 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -3074,7 +3074,7 @@
 	numa_zonelist_order= [KNL, BOOT] Select zonelist order for NUMA.
 			'node', 'default' can be specified
 			This can be set from sysctl after boot.
-			See Documentation/sysctl/vm.txt for details.
+			See Documentation/sysctl/vm.rst for details.
 
 	ohci1394_dma=early	[HW] enable debugging via the ohci1394 driver.
 			See Documentation/debugging-via-ohci1394.rst for more
diff --git a/Documentation/admin-guide/mm/index.rst b/Documentation/admin-guide/mm/index.rst
index 8edb35f11317..ea33ca6a5aca 100644
--- a/Documentation/admin-guide/mm/index.rst
+++ b/Documentation/admin-guide/mm/index.rst
@@ -11,7 +11,7 @@ processes address space and many other cool things.
 Linux memory management is a complex system with many configurable
 settings. Most of these settings are available via ``/proc``
 filesystem and can be quired and adjusted using ``sysctl``. These APIs
-are described in Documentation/sysctl/vm.txt and in `man 5 proc`_.
+are described in Documentation/sysctl/vm.rst and in `man 5 proc`_.
 
 .. _man 5 proc: http://man7.org/linux/man-pages/man5/proc.5.html
 
diff --git a/Documentation/admin-guide/mm/ksm.rst b/Documentation/admin-guide/mm/ksm.rst
index 9303786632d1..7b2b8767c0b4 100644
--- a/Documentation/admin-guide/mm/ksm.rst
+++ b/Documentation/admin-guide/mm/ksm.rst
@@ -59,7 +59,7 @@ MADV_UNMERGEABLE is applied to a range which was never MADV_MERGEABLE.
 
 If a region of memory must be split into at least one new MADV_MERGEABLE
 or MADV_UNMERGEABLE region, the madvise may return ENOMEM if the process
-will exceed ``vm.max_map_count`` (see Documentation/sysctl/vm.txt).
+will exceed ``vm.max_map_count`` (see Documentation/sysctl/vm.rst).
 
 Like other madvise calls, they are intended for use on mapped areas of
 the user address space: they will report ENOMEM if the specified range
diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst
index c37ec7cd9c06..2222c5e56dfd 100644
--- a/Documentation/core-api/printk-formats.rst
+++ b/Documentation/core-api/printk-formats.rst
@@ -111,7 +111,7 @@ Kernel Pointers
 
 For printing kernel pointers which should be hidden from unprivileged
 users. The behaviour of %pK depends on the kptr_restrict sysctl - see
-Documentation/sysctl/kernel.txt for more details.
+Documentation/sysctl/kernel.rst for more details.
 
 Unmodified Addresses
 --------------------
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index e28f765da570..878e37fbd376 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -2222,7 +2222,7 @@ addr_scope_policy - INTEGER
 
 
 /proc/sys/net/core/*
-	Please see: Documentation/sysctl/net.txt for descriptions of these entries.
+	Please see: Documentation/sysctl/net.rst for descriptions of these entries.
 
 
 /proc/sys/net/unix/*
diff --git a/Documentation/sysctl/abi.rst b/Documentation/sysctl/abi.rst
new file mode 100644
index 000000000000..599bcde7f0b7
--- /dev/null
+++ b/Documentation/sysctl/abi.rst
@@ -0,0 +1,67 @@
+================================
+Documentation for /proc/sys/abi/
+================================
+
+kernel version 2.6.0.test2
+
+Copyright (c) 2003,  Fabian Frederick <ffrederick@users.sourceforge.net>
+
+For general info: index.rst.
+
+------------------------------------------------------------------------------
+
+This path is binary emulation relevant aka personality types aka abi.
+When a process is executed, it's linked to an exec_domain whose
+personality is defined using values available from /proc/sys/abi.
+You can find further details about abi in include/linux/personality.h.
+
+Here are the files featuring in 2.6 kernel:
+
+- defhandler_coff
+- defhandler_elf
+- defhandler_lcall7
+- defhandler_libcso
+- fake_utsname
+- trace
+
+defhandler_coff
+---------------
+
+defined value:
+	PER_SCOSVR3::
+
+		0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS | SHORT_INODE
+
+defhandler_elf
+--------------
+
+defined value:
+	PER_LINUX::
+
+		0
+
+defhandler_lcall7
+-----------------
+
+defined value :
+	PER_SVR4::
+
+		0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
+
+defhandler_libsco
+-----------------
+
+defined value:
+	PER_SVR4::
+
+		0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
+
+fake_utsname
+------------
+
+Unused
+
+trace
+-----
+
+Unused
diff --git a/Documentation/sysctl/abi.txt b/Documentation/sysctl/abi.txt
deleted file mode 100644
index 63f4ebcf652c..000000000000
--- a/Documentation/sysctl/abi.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Documentation for /proc/sys/abi/* kernel version 2.6.0.test2
-	(c) 2003,  Fabian Frederick <ffrederick@users.sourceforge.net>
-
-For general info : README.
-
-==============================================================
-
-This path is binary emulation relevant aka personality types aka abi.
-When a process is executed, it's linked to an exec_domain whose
-personality is defined using values available from /proc/sys/abi.
-You can find further details about abi in include/linux/personality.h.
-
-Here are the files featuring in 2.6 kernel :
-
-- defhandler_coff
-- defhandler_elf
-- defhandler_lcall7
-- defhandler_libcso
-- fake_utsname
-- trace
-
-===========================================================
-defhandler_coff:
-defined value :
-PER_SCOSVR3
-0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS | SHORT_INODE
-
-===========================================================
-defhandler_elf:
-defined value :
-PER_LINUX
-0
-
-===========================================================
-defhandler_lcall7:
-defined value :
-PER_SVR4
-0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
-
-===========================================================
-defhandler_libsco:
-defined value:
-PER_SVR4
-0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
-
-===========================================================
-fake_utsname:
-Unused
-
-===========================================================
-trace:
-Unused
-
-===========================================================
diff --git a/Documentation/sysctl/fs.txt b/Documentation/sysctl/fs.rst
similarity index 77%
rename from Documentation/sysctl/fs.txt
rename to Documentation/sysctl/fs.rst
index ebc679bcb2dc..94ad19e879c2 100644
--- a/Documentation/sysctl/fs.txt
+++ b/Documentation/sysctl/fs.rst
@@ -1,10 +1,16 @@
-Documentation for /proc/sys/fs/*	kernel version 2.2.10
-	(c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
-	(c) 2009,        Shen Feng<shen@cn.fujitsu.com>
+===============================
+Documentation for /proc/sys/fs/
+===============================
 
-For general info and legal blurb, please look in README.
+kernel version 2.2.10
 
-==============================================================
+Copyright (c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
+
+Copyright (c) 2009,        Shen Feng<shen@cn.fujitsu.com>
+
+For general info and legal blurb, please look in intro.rst.
+
+------------------------------------------------------------------------------
 
 This file contains documentation for the sysctl files in
 /proc/sys/fs/ and is valid for Linux kernel version 2.2.
@@ -16,9 +22,10 @@ system, it is advisable to read both documentation and source
 before actually making adjustments.
 
 1. /proc/sys/fs
-----------------------------------------------------------
+===============
 
 Currently, these files are in /proc/sys/fs:
+
 - aio-max-nr
 - aio-nr
 - dentry-state
@@ -42,9 +49,9 @@ Currently, these files are in /proc/sys/fs:
 - super-max
 - super-nr
 
-==============================================================
 
-aio-nr & aio-max-nr:
+aio-nr & aio-max-nr
+-------------------
 
 aio-nr is the running total of the number of events specified on the
 io_setup system call for all currently active aio contexts.  If aio-nr
@@ -52,21 +59,20 @@ reaches aio-max-nr then io_setup will fail with EAGAIN.  Note that
 raising aio-max-nr does not result in the pre-allocation or re-sizing
 of any kernel data structures.
 
-==============================================================
 
-dentry-state:
+dentry-state
+------------
 
-From linux/include/linux/dcache.h:
---------------------------------------------------------------
-struct dentry_stat_t dentry_stat {
+From linux/include/linux/dcache.h::
+
+  struct dentry_stat_t dentry_stat {
         int nr_dentry;
         int nr_unused;
         int age_limit;         /* age in seconds */
         int want_pages;        /* pages requested by system */
         int nr_negative;       /* # of unused negative dentries */
         int dummy;             /* Reserved for future use */
-};
---------------------------------------------------------------
+  };
 
 Dentries are dynamically allocated and deallocated.
 
@@ -84,9 +90,9 @@ negative dentries which do not map to any files. Instead,
 they help speeding up rejection of non-existing files provided
 by the users.
 
-==============================================================
 
-dquot-max & dquot-nr:
+dquot-max & dquot-nr
+--------------------
 
 The file dquot-max shows the maximum number of cached disk
 quota entries.
@@ -98,9 +104,9 @@ If the number of free cached disk quotas is very low and
 you have some awesome number of simultaneous system users,
 you might want to raise the limit.
 
-==============================================================
 
-file-max & file-nr:
+file-max & file-nr
+------------------
 
 The value in file-max denotes the maximum number of file-
 handles that the Linux kernel will allocate. When you get lots
@@ -119,18 +125,19 @@ used file handles.
 Attempts to allocate more file descriptors than file-max are
 reported with printk, look for "VFS: file-max limit <number>
 reached".
-==============================================================
 
-nr_open:
+
+nr_open
+-------
 
 This denotes the maximum number of file-handles a process can
 allocate. Default value is 1024*1024 (1048576) which should be
 enough for most machines. Actual limit depends on RLIMIT_NOFILE
 resource limit.
 
-==============================================================
 
-inode-max, inode-nr & inode-state:
+inode-max, inode-nr & inode-state
+---------------------------------
 
 As with file handles, the kernel allocates the inode structures
 dynamically, but can't free them yet.
@@ -157,9 +164,9 @@ preshrink is nonzero when the nr_inodes > inode-max and the
 system needs to prune the inode list instead of allocating
 more.
 
-==============================================================
 
-overflowgid & overflowuid:
+overflowgid & overflowuid
+-------------------------
 
 Some filesystems only support 16-bit UIDs and GIDs, although in Linux
 UIDs and GIDs are 32 bits. When one of these filesystems is mounted
@@ -169,18 +176,18 @@ to a fixed value before being written to disk.
 These sysctls allow you to change the value of the fixed UID and GID.
 The default is 65534.
 
-==============================================================
 
-pipe-user-pages-hard:
+pipe-user-pages-hard
+--------------------
 
 Maximum total number of pages a non-privileged user may allocate for pipes.
 Once this limit is reached, no new pipes may be allocated until usage goes
 below the limit again. When set to 0, no limit is applied, which is the default
 setting.
 
-==============================================================
 
-pipe-user-pages-soft:
+pipe-user-pages-soft
+--------------------
 
 Maximum total number of pages a non-privileged user may allocate for pipes
 before the pipe size gets limited to a single page. Once this limit is reached,
@@ -190,9 +197,9 @@ denied until usage goes below the limit again. The default value allows to
 allocate up to 1024 pipes at their default size. When set to 0, no limit is
 applied.
 
-==============================================================
 
-protected_fifos:
+protected_fifos
+---------------
 
 The intent of this protection is to avoid unintentional writes to
 an attacker-controlled FIFO, where a program expected to create a regular
@@ -208,9 +215,9 @@ When set to "2" it also applies to group writable sticky directories.
 
 This protection is based on the restrictions in Openwall.
 
-==============================================================
 
-protected_hardlinks:
+protected_hardlinks
+--------------------
 
 A long-standing class of security issues is the hardlink-based
 time-of-check-time-of-use race, most commonly seen in world-writable
@@ -228,9 +235,9 @@ already own the source file, or do not have read/write access to it.
 
 This protection is based on the restrictions in Openwall and grsecurity.
 
-==============================================================
 
-protected_regular:
+protected_regular
+-----------------
 
 This protection is similar to protected_fifos, but it
 avoids writes to an attacker-controlled regular file, where a program
@@ -244,9 +251,9 @@ owned by the owner of the directory.
 
 When set to "2" it also applies to group writable sticky directories.
 
-==============================================================
 
-protected_symlinks:
+protected_symlinks
+------------------
 
 A long-standing class of security issues is the symlink-based
 time-of-check-time-of-use race, most commonly seen in world-writable
@@ -264,34 +271,38 @@ follower match, or when the directory owner matches the symlink's owner.
 
 This protection is based on the restrictions in Openwall and grsecurity.
 
-==============================================================
 
 suid_dumpable:
+--------------
 
 This value can be used to query and set the core dump mode for setuid
 or otherwise protected/tainted binaries. The modes are
 
-0 - (default) - traditional behaviour. Any process which has changed
-	privilege levels or is execute only will not be dumped.
-1 - (debug) - all processes dump core when possible. The core dump is
-	owned by the current user and no security is applied. This is
-	intended for system debugging situations only. Ptrace is unchecked.
-	This is insecure as it allows regular users to examine the memory
-	contents of privileged processes.
-2 - (suidsafe) - any binary which normally would not be dumped is dumped
-	anyway, but only if the "core_pattern" kernel sysctl is set to
-	either a pipe handler or a fully qualified path. (For more details
-	on this limitation, see CVE-2006-2451.) This mode is appropriate
-	when administrators are attempting to debug problems in a normal
-	environment, and either have a core dump pipe handler that knows
-	to treat privileged core dumps with care, or specific directory
-	defined for catching core dumps. If a core dump happens without
-	a pipe handler or fully qualifid path, a message will be emitted
-	to syslog warning about the lack of a correct setting.
+=   ==========  ===============================================================
+0   (default)	traditional behaviour. Any process which has changed
+		privilege levels or is execute only will not be dumped.
+1   (debug)	all processes dump core when possible. The core dump is
+		owned by the current user and no security is applied. This is
+		intended for system debugging situations only.
+		Ptrace is unchecked.
+		This is insecure as it allows regular users to examine the
+		memory contents of privileged processes.
+2   (suidsafe)	any binary which normally would not be dumped is dumped
+		anyway, but only if the "core_pattern" kernel sysctl is set to
+		either a pipe handler or a fully qualified path. (For more
+		details on this limitation, see CVE-2006-2451.) This mode is
+		appropriate when administrators are attempting to debug
+		problems in a normal environment, and either have a core dump
+		pipe handler that knows to treat privileged core dumps with
+		care, or specific directory defined for catching core dumps.
+		If a core dump happens without a pipe handler or fully
+		qualified path, a message will be emitted to syslog warning
+		about the lack of a correct setting.
+=   ==========  ===============================================================
 
-==============================================================
 
-super-max & super-nr:
+super-max & super-nr
+--------------------
 
 These numbers control the maximum number of superblocks, and
 thus the maximum number of mounted filesystems the kernel
@@ -299,33 +310,33 @@ can have. You only need to increase super-max if you need to
 mount more filesystems than the current value in super-max
 allows you to.
 
-==============================================================
 
-aio-nr & aio-max-nr:
+aio-nr & aio-max-nr
+-------------------
 
 aio-nr shows the current system-wide number of asynchronous io
 requests.  aio-max-nr allows you to change the maximum value
 aio-nr can grow to.
 
-==============================================================
 
-mount-max:
+mount-max
+---------
 
 This denotes the maximum number of mounts that may exist
 in a mount namespace.
 
-==============================================================
 
 
 2. /proc/sys/fs/binfmt_misc
-----------------------------------------------------------
+===========================
 
 Documentation for the files in /proc/sys/fs/binfmt_misc is
 in Documentation/admin-guide/binfmt-misc.rst.
 
 
 3. /proc/sys/fs/mqueue - POSIX message queues filesystem
-----------------------------------------------------------
+========================================================
+
 
 The "mqueue"  filesystem provides  the necessary kernel features to enable the
 creation of a  user space  library that  implements  the  POSIX message queues
@@ -356,7 +367,7 @@ the default message size value if attr parameter of mq_open(2) is NULL. If it
 exceed msgsize_max, the default value is initialized msgsize_max.
 
 4. /proc/sys/fs/epoll - Configuration options for the epoll interface
---------------------------------------------------------
+=====================================================================
 
 This directory contains configuration options for the epoll(7) interface.
 
diff --git a/Documentation/sysctl/README b/Documentation/sysctl/index.rst
similarity index 78%
rename from Documentation/sysctl/README
rename to Documentation/sysctl/index.rst
index d5f24ab0ecc3..efbcde8c1c9c 100644
--- a/Documentation/sysctl/README
+++ b/Documentation/sysctl/index.rst
@@ -1,5 +1,12 @@
-Documentation for /proc/sys/		kernel version 2.2.10
-	(c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
+:orphan:
+
+===========================
+Documentation for /proc/sys
+===========================
+
+Copyright (c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
+
+------------------------------------------------------------------------------
 
 'Why', I hear you ask, 'would anyone even _want_ documentation
 for them sysctl files? If anybody really needs it, it's all in
@@ -12,11 +19,12 @@ have the time or knowledge to read the source code.
 Furthermore, the programmers who built sysctl have built it to
 be actually used, not just for the fun of programming it :-)
 
-==============================================================
+------------------------------------------------------------------------------
 
 Legal blurb:
 
 As usual, there are two main things to consider:
+
 1. you get what you pay for
 2. it's free
 
@@ -35,15 +43,17 @@ stories to: <riel@nl.linux.org>
 
 Rik van Riel.
 
-==============================================================
+--------------------------------------------------------------
 
-Introduction:
+Introduction
+============
 
 Sysctl is a means of configuring certain aspects of the kernel
 at run-time, and the /proc/sys/ directory is there so that you
 don't even need special tools to do it!
 In fact, there are only four things needed to use these config
 facilities:
+
 - a running Linux system
 - root access
 - common sense (this is especially hard to come by these days)
@@ -54,7 +64,9 @@ several (arch-dependent?) subdirs. Each subdir is mainly about
 one part of the kernel, so you can do configuration on a piece
 by piece basis, or just some 'thematic frobbing'.
 
-The subdirs are about:
+This documentation is about:
+
+=============== ===============================================================
 abi/		execution domains & personalities
 debug/		<empty>
 dev/		device specific information (eg dev/cdrom/info)
@@ -70,7 +82,19 @@ sunrpc/		SUN Remote Procedure Call (NFS)
 vm/		memory management tuning
 		buffer and cache management
 user/		Per user per user namespace limits
+=============== ===============================================================
 
 These are the subdirs I have on my system. There might be more
 or other subdirs in another setup. If you see another dir, I'd
 really like to hear about it :-)
+
+.. toctree::
+   :maxdepth: 1
+
+   abi
+   fs
+   kernel
+   net
+   sunrpc
+   user
+   vm
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.rst
similarity index 79%
rename from Documentation/sysctl/kernel.txt
rename to Documentation/sysctl/kernel.rst
index 86fd3e35afa7..1e87935e6e96 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.rst
@@ -1,10 +1,16 @@
-Documentation for /proc/sys/kernel/*	kernel version 2.2.10
-	(c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
-	(c) 2009,        Shen Feng<shen@cn.fujitsu.com>
+===================================
+Documentation for /proc/sys/kernel/
+===================================
 
-For general info and legal blurb, please look in README.
+kernel version 2.2.10
 
-==============================================================
+Copyright (c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
+
+Copyright (c) 2009,        Shen Feng<shen@cn.fujitsu.com>
+
+For general info and legal blurb, please look in index.rst.
+
+------------------------------------------------------------------------------
 
 This file contains documentation for the sysctl files in
 /proc/sys/kernel/ and is valid for Linux kernel version 2.2.
@@ -102,9 +108,9 @@ show up in /proc/sys/kernel:
 - watchdog_thresh
 - version
 
-==============================================================
 
 acct:
+=====
 
 highwater lowwater frequency
 
@@ -119,18 +125,18 @@ That is, suspend accounting if there left <= 2% free; resume it
 if we got >=4%; consider information about amount of free space
 valid for 30 seconds.
 
-==============================================================
 
 acpi_video_flags:
+=================
 
 flags
 
 See Doc*/kernel/power/video.txt, it allows mode of video boot to be
 set during run time.
 
-==============================================================
 
 auto_msgmni:
+============
 
 This variable has no effect and may be removed in future kernel
 releases. Reading it always returns 0.
@@ -140,9 +146,8 @@ Echoing "1" into this file enabled msgmni automatic recomputing.
 Echoing "0" turned it off. auto_msgmni default value was 1.
 
 
-==============================================================
-
 bootloader_type:
+================
 
 x86 bootloader identification
 
@@ -157,9 +162,9 @@ the value 340 = 0x154.
 See the type_of_loader and ext_loader_type fields in
 Documentation/x86/boot.txt for additional information.
 
-==============================================================
 
 bootloader_version:
+===================
 
 x86 bootloader version
 
@@ -169,9 +174,9 @@ file will contain the value 564 = 0x234.
 See the type_of_loader and ext_loader_ver fields in
 Documentation/x86/boot.txt for additional information.
 
-==============================================================
 
 callhome:
+=========
 
 Controls the kernel's callhome behavior in case of a kernel panic.
 
@@ -184,27 +189,31 @@ the complete kernel oops message is send to the IBM customer service
 organization in case the mainframe the Linux operating system is running
 on has a service contract with IBM.
 
-==============================================================
 
-cap_last_cap
+cap_last_cap:
+=============
 
 Highest valid capability of the running kernel.  Exports
 CAP_LAST_CAP from the kernel.
 
-==============================================================
 
 core_pattern:
+=============
 
 core_pattern is used to specify a core dumpfile pattern name.
-. max length 127 characters; default value is "core"
-. core_pattern is used as a pattern template for the output filename;
+
+* max length 127 characters; default value is "core"
+* core_pattern is used as a pattern template for the output filename;
   certain string patterns (beginning with '%') are substituted with
   their actual values.
-. backward compatibility with core_uses_pid:
+* backward compatibility with core_uses_pid:
+
 	If core_pattern does not include "%p" (default does not)
 	and core_uses_pid is set, then .PID will be appended to
 	the filename.
-. corename format specifiers:
+
+* corename format specifiers::
+
 	%<NUL>	'%' is dropped
 	%%	output one '%'
 	%p	pid
@@ -221,13 +230,14 @@ core_pattern is used to specify a core dumpfile pattern name.
 	%e	executable filename (may be shortened)
 	%E	executable path
 	%<OTHER> both are dropped
-. If the first character of the pattern is a '|', the kernel will treat
+
+* If the first character of the pattern is a '|', the kernel will treat
   the rest of the pattern as a command to run.  The core dump will be
   written to the standard input of that program instead of to a file.
 
-==============================================================
 
 core_pipe_limit:
+================
 
 This sysctl is only applicable when core_pattern is configured to pipe
 core files to a user space helper (when the first character of
@@ -248,9 +258,9 @@ parallel, but that no waiting will take place (i.e. the collecting
 process is not guaranteed access to /proc/<crashing pid>/).  This
 value defaults to 0.
 
-==============================================================
 
 core_uses_pid:
+==============
 
 The default coredump filename is "core".  By setting
 core_uses_pid to 1, the coredump filename becomes core.PID.
@@ -258,9 +268,9 @@ If core_pattern does not include "%p" (default does not)
 and core_uses_pid is set, then .PID will be appended to
 the filename.
 
-==============================================================
 
 ctrl-alt-del:
+=============
 
 When the value in this file is 0, ctrl-alt-del is trapped and
 sent to the init(1) program to handle a graceful restart.
@@ -268,14 +278,15 @@ When, however, the value is > 0, Linux's reaction to a Vulcan
 Nerve Pinch (tm) will be an immediate reboot, without even
 syncing its dirty buffers.
 
-Note: when a program (like dosemu) has the keyboard in 'raw'
-mode, the ctrl-alt-del is intercepted by the program before it
-ever reaches the kernel tty layer, and it's up to the program
-to decide what to do with it.
+Note:
+  when a program (like dosemu) has the keyboard in 'raw'
+  mode, the ctrl-alt-del is intercepted by the program before it
+  ever reaches the kernel tty layer, and it's up to the program
+  to decide what to do with it.
 
-==============================================================
 
 dmesg_restrict:
+===============
 
 This toggle indicates whether unprivileged users are prevented
 from using dmesg(8) to view messages from the kernel's log buffer.
@@ -286,18 +297,21 @@ dmesg(8).
 The kernel config option CONFIG_SECURITY_DMESG_RESTRICT sets the
 default value of dmesg_restrict.
 
-==============================================================
 
 domainname & hostname:
+======================
 
 These files can be used to set the NIS/YP domainname and the
 hostname of your box in exactly the same way as the commands
-domainname and hostname, i.e.:
-# echo "darkstar" > /proc/sys/kernel/hostname
-# echo "mydomain" > /proc/sys/kernel/domainname
-has the same effect as
-# hostname "darkstar"
-# domainname "mydomain"
+domainname and hostname, i.e.::
+
+	# echo "darkstar" > /proc/sys/kernel/hostname
+	# echo "mydomain" > /proc/sys/kernel/domainname
+
+has the same effect as::
+
+	# hostname "darkstar"
+	# domainname "mydomain"
 
 Note, however, that the classic darkstar.frop.org has the
 hostname "darkstar" and DNS (Internet Domain Name Server)
@@ -306,8 +320,9 @@ Information Service) or YP (Yellow Pages) domainname. These two
 domain names are in general different. For a detailed discussion
 see the hostname(1) man page.
 
-==============================================================
+
 hardlockup_all_cpu_backtrace:
+=============================
 
 This value controls the hard lockup detector behavior when a hard
 lockup condition is detected as to whether or not to gather further
@@ -317,9 +332,10 @@ will be initiated.
 0: do nothing. This is the default behavior.
 
 1: on detection capture more debug information.
-==============================================================
+
 
 hardlockup_panic:
+=================
 
 This parameter can be used to control whether the kernel panics
 when a hard lockup is detected.
@@ -330,16 +346,16 @@ when a hard lockup is detected.
 See Documentation/lockup-watchdogs.rst for more information.  This can
 also be set using the nmi_watchdog kernel parameter.
 
-==============================================================
 
 hotplug:
+========
 
 Path for the hotplug policy agent.
 Default value is "/sbin/hotplug".
 
-==============================================================
 
 hung_task_panic:
+================
 
 Controls the kernel's behavior when a hung task is detected.
 This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
@@ -348,27 +364,28 @@ This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
 
 1: panic immediately.
 
-==============================================================
 
 hung_task_check_count:
+======================
 
 The upper bound on the number of tasks that are checked.
 This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
 
-==============================================================
 
 hung_task_timeout_secs:
+=======================
 
 When a task in D state did not get scheduled
 for more than this value report a warning.
 This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
 
 0: means infinite timeout - no checking done.
+
 Possible values to set are in range {0..LONG_MAX/HZ}.
 
-==============================================================
 
 hung_task_check_interval_secs:
+==============================
 
 Hung task check interval. If hung task checking is enabled
 (see hung_task_timeout_secs), the check is done every
@@ -378,9 +395,9 @@ This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
 0 (default): means use hung_task_timeout_secs as checking interval.
 Possible values to set are in range {0..LONG_MAX/HZ}.
 
-==============================================================
 
 hung_task_warnings:
+===================
 
 The maximum number of warnings to report. During a check interval
 if a hung task is detected, this value is decreased by 1.
@@ -389,9 +406,9 @@ This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
 
 -1: report an infinite number of warnings.
 
-==============================================================
 
 hyperv_record_panic_msg:
+========================
 
 Controls whether the panic kmsg data should be reported to Hyper-V.
 
@@ -399,9 +416,9 @@ Controls whether the panic kmsg data should be reported to Hyper-V.
 
 1: report the panic kmsg data. This is the default behavior.
 
-==============================================================
 
 kexec_load_disabled:
+====================
 
 A toggle indicating if the kexec_load syscall has been disabled. This
 value defaults to 0 (false: kexec_load enabled), but can be set to 1
@@ -411,9 +428,9 @@ loaded before disabling the syscall, allowing a system to set up (and
 later use) an image without it being altered. Generally used together
 with the "modules_disabled" sysctl.
 
-==============================================================
 
 kptr_restrict:
+==============
 
 This toggle indicates whether restrictions are placed on
 exposing kernel addresses via /proc and other interfaces.
@@ -436,16 +453,16 @@ values to unprivileged users is a concern.
 When kptr_restrict is set to (2), kernel pointers printed using
 %pK will be replaced with 0's regardless of privileges.
 
-==============================================================
 
 l2cr: (PPC only)
+================
 
 This flag controls the L2 cache of G3 processor boards. If
 0, the cache is disabled. Enabled if nonzero.
 
-==============================================================
 
 modules_disabled:
+=================
 
 A toggle value indicating if modules are allowed to be loaded
 in an otherwise modular kernel.  This toggle defaults to off
@@ -453,9 +470,9 @@ in an otherwise modular kernel.  This toggle defaults to off
 neither loaded nor unloaded, and the toggle cannot be set back
 to false.  Generally used with the "kexec_load_disabled" toggle.
 
-==============================================================
 
 msg_next_id, sem_next_id, and shm_next_id:
+==========================================
 
 These three toggles allows to specify desired id for next allocated IPC
 object: message, semaphore or shared memory respectively.
@@ -464,21 +481,22 @@ By default they are equal to -1, which means generic allocation logic.
 Possible values to set are in range {0..INT_MAX}.
 
 Notes:
-1) kernel doesn't guarantee, that new object will have desired id. So,
-it's up to userspace, how to handle an object with "wrong" id.
-2) Toggle with non-default value will be set back to -1 by kernel after
-successful IPC object allocation. If an IPC object allocation syscall
-fails, it is undefined if the value remains unmodified or is reset to -1.
+  1) kernel doesn't guarantee, that new object will have desired id. So,
+     it's up to userspace, how to handle an object with "wrong" id.
+  2) Toggle with non-default value will be set back to -1 by kernel after
+     successful IPC object allocation. If an IPC object allocation syscall
+     fails, it is undefined if the value remains unmodified or is reset to -1.
 
-==============================================================
 
 nmi_watchdog:
+=============
 
 This parameter can be used to control the NMI watchdog
 (i.e. the hard lockup detector) on x86 systems.
 
-   0 - disable the hard lockup detector
-   1 - enable the hard lockup detector
+0 - disable the hard lockup detector
+
+1 - enable the hard lockup detector
 
 The hard lockup detector monitors each CPU for its ability to respond to
 timer interrupts. The mechanism utilizes CPU performance counter registers
@@ -486,15 +504,15 @@ that are programmed to generate Non-Maskable Interrupts (NMIs) periodically
 while a CPU is busy. Hence, the alternative name 'NMI watchdog'.
 
 The NMI watchdog is disabled by default if the kernel is running as a guest
-in a KVM virtual machine. This default can be overridden by adding
+in a KVM virtual machine. This default can be overridden by adding::
 
    nmi_watchdog=1
 
 to the guest kernel command line (see Documentation/admin-guide/kernel-parameters.rst).
 
-==============================================================
 
-numa_balancing
+numa_balancing:
+===============
 
 Enables/disables automatic page fault based NUMA memory
 balancing. Memory is moved automatically to nodes
@@ -516,10 +534,9 @@ faults may be controlled by the numa_balancing_scan_period_min_ms,
 numa_balancing_scan_delay_ms, numa_balancing_scan_period_max_ms,
 numa_balancing_scan_size_mb, and numa_balancing_settle_count sysctls.
 
-==============================================================
+numa_balancing_scan_period_min_ms, numa_balancing_scan_delay_ms, numa_balancing_scan_period_max_ms, numa_balancing_scan_size_mb
+===============================================================================================================================
 
-numa_balancing_scan_period_min_ms, numa_balancing_scan_delay_ms,
-numa_balancing_scan_period_max_ms, numa_balancing_scan_size_mb
 
 Automatic NUMA balancing scans tasks address space and unmaps pages to
 detect if pages are properly placed or if the data should be migrated to a
@@ -555,16 +572,18 @@ rate for each task.
 numa_balancing_scan_size_mb is how many megabytes worth of pages are
 scanned for a given scan.
 
-==============================================================
 
 osrelease, ostype & version:
+============================
 
-# cat osrelease
-2.1.88
-# cat ostype
-Linux
-# cat version
-#5 Wed Feb 25 21:49:24 MET 1998
+::
+
+  # cat osrelease
+  2.1.88
+  # cat ostype
+  Linux
+  # cat version
+  #5 Wed Feb 25 21:49:24 MET 1998
 
 The files osrelease and ostype should be clear enough. Version
 needs a little more clarification however. The '#5' means that
@@ -572,9 +591,9 @@ this is the fifth kernel built from this source base and the
 date behind it indicates the time the kernel was built.
 The only way to tune these values is to rebuild the kernel :-)
 
-==============================================================
 
 overflowgid & overflowuid:
+==========================
 
 if your architecture did not always support 32-bit UIDs (i.e. arm,
 i386, m68k, sh, and sparc32), a fixed UID and GID will be returned to
@@ -584,17 +603,17 @@ actual UID or GID would exceed 65535.
 These sysctls allow you to change the value of the fixed UID and GID.
 The default is 65534.
 
-==============================================================
 
 panic:
+======
 
 The value in this file represents the number of seconds the kernel
 waits before rebooting on a panic. When you use the software watchdog,
 the recommended setting is 60.
 
-==============================================================
 
 panic_on_io_nmi:
+================
 
 Controls the kernel's behavior when a CPU receives an NMI caused by
 an IO error.
@@ -607,20 +626,20 @@ an IO error.
    servers issue this sort of NMI when the dump button is pushed,
    and you can use this option to take a crash dump.
 
-==============================================================
 
 panic_on_oops:
+==============
 
 Controls the kernel's behaviour when an oops or BUG is encountered.
 
 0: try to continue operation
 
-1: panic immediately.  If the `panic' sysctl is also non-zero then the
+1: panic immediately.  If the `panic` sysctl is also non-zero then the
    machine will be rebooted.
 
-==============================================================
 
 panic_on_stackoverflow:
+=======================
 
 Controls the kernel's behavior when detecting the overflows of
 kernel, IRQ and exception stacks except a user stack.
@@ -630,9 +649,9 @@ This file shows up if CONFIG_DEBUG_STACKOVERFLOW is enabled.
 
 1: panic immediately.
 
-==============================================================
 
 panic_on_unrecovered_nmi:
+=========================
 
 The default Linux behaviour on an NMI of either memory or unknown is
 to continue operation. For many environments such as scientific
@@ -643,9 +662,9 @@ A small number of systems do generate NMI's for bizarre random reasons
 such as power management so the default is off. That sysctl works like
 the existing panic controls already in that directory.
 
-==============================================================
 
 panic_on_warn:
+==============
 
 Calls panic() in the WARN() path when set to 1.  This is useful to avoid
 a kernel rebuild when attempting to kdump at the location of a WARN().
@@ -654,25 +673,28 @@ a kernel rebuild when attempting to kdump at the location of a WARN().
 
 1: call panic() after printing out WARN() location.
 
-==============================================================
 
 panic_print:
+============
 
 Bitmask for printing system info when panic happens. User can chose
 combination of the following bits:
 
-bit 0: print all tasks info
-bit 1: print system memory info
-bit 2: print timer info
-bit 3: print locks info if CONFIG_LOCKDEP is on
-bit 4: print ftrace buffer
+=====  ========================================
+bit 0  print all tasks info
+bit 1  print system memory info
+bit 2  print timer info
+bit 3  print locks info if CONFIG_LOCKDEP is on
+bit 4  print ftrace buffer
+=====  ========================================
+
+So for example to print tasks and memory info on panic, user can::
 
-So for example to print tasks and memory info on panic, user can:
   echo 3 > /proc/sys/kernel/panic_print
 
-==============================================================
 
 panic_on_rcu_stall:
+===================
 
 When set to 1, calls panic() after RCU stall detection messages. This
 is useful to define the root cause of RCU stalls using a vmcore.
@@ -681,9 +703,9 @@ is useful to define the root cause of RCU stalls using a vmcore.
 
 1: panic() after printing RCU stall messages.
 
-==============================================================
 
 perf_cpu_time_max_percent:
+==========================
 
 Hints to the kernel how much CPU time it should be allowed to
 use to handle perf sampling events.  If the perf subsystem
@@ -696,10 +718,12 @@ unexpectedly take too long to execute, the NMIs can become
 stacked up next to each other so much that nothing else is
 allowed to execute.
 
-0: disable the mechanism.  Do not monitor or correct perf's
+0:
+   disable the mechanism.  Do not monitor or correct perf's
    sampling rate no matter how CPU time it takes.
 
-1-100: attempt to throttle perf's sample rate to this
+1-100:
+   attempt to throttle perf's sample rate to this
    percentage of CPU.  Note: the kernel calculates an
    "expected" length of each sample event.  100 here means
    100% of that expected length.  Even if this is set to
@@ -707,23 +731,30 @@ allowed to execute.
    length is exceeded.  Set to 0 if you truly do not care
    how much CPU is consumed.
 
-==============================================================
 
 perf_event_paranoid:
+====================
 
 Controls use of the performance events system by unprivileged
 users (without CAP_SYS_ADMIN).  The default value is 2.
 
- -1: Allow use of (almost) all events by all users
+===  ==================================================================
+ -1  Allow use of (almost) all events by all users
+
      Ignore mlock limit after perf_event_mlock_kb without CAP_IPC_LOCK
->=0: Disallow ftrace function tracepoint by users without CAP_SYS_ADMIN
+
+>=0  Disallow ftrace function tracepoint by users without CAP_SYS_ADMIN
+
      Disallow raw tracepoint access by users without CAP_SYS_ADMIN
->=1: Disallow CPU event access by users without CAP_SYS_ADMIN
->=2: Disallow kernel profiling by users without CAP_SYS_ADMIN
 
-==============================================================
+>=1  Disallow CPU event access by users without CAP_SYS_ADMIN
+
+>=2  Disallow kernel profiling by users without CAP_SYS_ADMIN
+===  ==================================================================
+
 
 perf_event_max_stack:
+=====================
 
 Controls maximum number of stack frames to copy for (attr.sample_type &
 PERF_SAMPLE_CALLCHAIN) configured events, for instance, when using
@@ -734,17 +765,17 @@ enabled, otherwise writing to this file will return -EBUSY.
 
 The default value is 127.
 
-==============================================================
 
 perf_event_mlock_kb:
+====================
 
 Control size of per-cpu ring buffer not counted agains mlock limit.
 
 The default value is 512 + 1 page
 
-==============================================================
 
 perf_event_max_contexts_per_stack:
+==================================
 
 Controls maximum number of stack frame context entries for
 (attr.sample_type & PERF_SAMPLE_CALLCHAIN) configured events, for
@@ -755,25 +786,25 @@ enabled, otherwise writing to this file will return -EBUSY.
 
 The default value is 8.
 
-==============================================================
 
 pid_max:
+========
 
 PID allocation wrap value.  When the kernel's next PID value
 reaches this value, it wraps back to a minimum PID value.
 PIDs of value pid_max or larger are not allocated.
 
-==============================================================
 
 ns_last_pid:
+============
 
 The last pid allocated in the current (the one task using this sysctl
 lives in) pid namespace. When selecting a pid for a next task on fork
 kernel tries to allocate a number starting from this one.
 
-==============================================================
 
 powersave-nap: (PPC only)
+=========================
 
 If set, Linux-PPC will use the 'nap' mode of powersaving,
 otherwise the 'doze' mode will be used.
@@ -781,6 +812,7 @@ otherwise the 'doze' mode will be used.
 ==============================================================
 
 printk:
+=======
 
 The four values in printk denote: console_loglevel,
 default_message_loglevel, minimum_console_loglevel and
@@ -790,25 +822,29 @@ These values influence printk() behavior when printing or
 logging error messages. See 'man 2 syslog' for more info on
 the different loglevels.
 
-- console_loglevel: messages with a higher priority than
-  this will be printed to the console
-- default_message_loglevel: messages without an explicit priority
-  will be printed with this priority
-- minimum_console_loglevel: minimum (highest) value to which
-  console_loglevel can be set
-- default_console_loglevel: default value for console_loglevel
+- console_loglevel:
+	messages with a higher priority than
+	this will be printed to the console
+- default_message_loglevel:
+	messages without an explicit priority
+	will be printed with this priority
+- minimum_console_loglevel:
+	minimum (highest) value to which
+	console_loglevel can be set
+- default_console_loglevel:
+	default value for console_loglevel
 
-==============================================================
 
 printk_delay:
+=============
 
 Delay each printk message in printk_delay milliseconds
 
 Value from 0 - 10000 is allowed.
 
-==============================================================
 
 printk_ratelimit:
+=================
 
 Some warning messages are rate limited. printk_ratelimit specifies
 the minimum length of time between these messages (in jiffies), by
@@ -816,48 +852,52 @@ default we allow one every 5 seconds.
 
 A value of 0 will disable rate limiting.
 
-==============================================================
 
 printk_ratelimit_burst:
+=======================
 
 While long term we enforce one message per printk_ratelimit
 seconds, we do allow a burst of messages to pass through.
 printk_ratelimit_burst specifies the number of messages we can
 send before ratelimiting kicks in.
 
-==============================================================
 
 printk_devkmsg:
+===============
 
 Control the logging to /dev/kmsg from userspace:
 
-ratelimit: default, ratelimited
+ratelimit:
+	default, ratelimited
+
 on: unlimited logging to /dev/kmsg from userspace
+
 off: logging to /dev/kmsg disabled
 
 The kernel command line parameter printk.devkmsg= overrides this and is
 a one-time setting until next reboot: once set, it cannot be changed by
 this sysctl interface anymore.
 
-==============================================================
 
 randomize_va_space:
+===================
 
 This option can be used to select the type of process address
 space randomization that is used in the system, for architectures
 that support this feature.
 
-0 - Turn the process address space randomization off.  This is the
+==  ===========================================================================
+0   Turn the process address space randomization off.  This is the
     default for architectures that do not support this feature anyways,
     and kernels that are booted with the "norandmaps" parameter.
 
-1 - Make the addresses of mmap base, stack and VDSO page randomized.
+1   Make the addresses of mmap base, stack and VDSO page randomized.
     This, among other things, implies that shared libraries will be
     loaded to random addresses.  Also for PIE-linked binaries, the
     location of code start is randomized.  This is the default if the
     CONFIG_COMPAT_BRK option is enabled.
 
-2 - Additionally enable heap randomization.  This is the default if
+2   Additionally enable heap randomization.  This is the default if
     CONFIG_COMPAT_BRK is disabled.
 
     There are a few legacy applications out there (such as some ancient
@@ -870,18 +910,19 @@ that support this feature.
     Systems with ancient and/or broken binaries should be configured
     with CONFIG_COMPAT_BRK enabled, which excludes the heap from process
     address space randomization.
+==  ===========================================================================
 
-==============================================================
 
 reboot-cmd: (Sparc only)
+========================
 
 ??? This seems to be a way to give an argument to the Sparc
 ROM/Flash boot loader. Maybe to tell it what to do after
 rebooting. ???
 
-==============================================================
 
 rtsig-max & rtsig-nr:
+=====================
 
 The file rtsig-max can be used to tune the maximum number
 of POSIX realtime (queued) signals that can be outstanding
@@ -889,9 +930,9 @@ in the system.
 
 rtsig-nr shows the number of RT signals currently queued.
 
-==============================================================
 
 sched_energy_aware:
+===================
 
 Enables/disables Energy Aware Scheduling (EAS). EAS starts
 automatically on platforms where it can run (that is,
@@ -900,17 +941,17 @@ Model available). If your platform happens to meet the
 requirements for EAS but you do not want to use it, change
 this value to 0.
 
-==============================================================
 
 sched_schedstats:
+=================
 
 Enables/disables scheduler statistics. Enabling this feature
 incurs a small amount of overhead in the scheduler but is
 useful for debugging and performance tuning.
 
-==============================================================
 
 sg-big-buff:
+============
 
 This file shows the size of the generic SCSI (sg) buffer.
 You can't tune it just yet, but you could change it on
@@ -921,9 +962,9 @@ There shouldn't be any reason to change this value. If
 you can come up with one, you probably know what you
 are doing anyway :)
 
-==============================================================
 
 shmall:
+=======
 
 This parameter sets the total amount of shared memory pages that
 can be used system wide. Hence, SHMALL should always be at least
@@ -932,20 +973,20 @@ ceil(shmmax/PAGE_SIZE).
 If you are not sure what the default PAGE_SIZE is on your Linux
 system, you can run the following command:
 
-# getconf PAGE_SIZE
+	# getconf PAGE_SIZE
 
-==============================================================
 
 shmmax:
+=======
 
 This value can be used to query and set the run time limit
 on the maximum shared memory segment size that can be created.
 Shared memory segments up to 1Gb are now supported in the
 kernel.  This value defaults to SHMMAX.
 
-==============================================================
 
 shm_rmid_forced:
+================
 
 Linux lets you set resource limits, including how much memory one
 process can consume, via setrlimit(2).  Unfortunately, shared memory
@@ -964,28 +1005,30 @@ need this.
 Note that if you change this from 0 to 1, already created segments
 without users and with a dead originative process will be destroyed.
 
-==============================================================
 
 sysctl_writes_strict:
+=====================
 
 Control how file position affects the behavior of updating sysctl values
 via the /proc/sys interface:
 
-  -1 - Legacy per-write sysctl value handling, with no printk warnings.
+  ==   ======================================================================
+  -1   Legacy per-write sysctl value handling, with no printk warnings.
        Each write syscall must fully contain the sysctl value to be
        written, and multiple writes on the same sysctl file descriptor
        will rewrite the sysctl value, regardless of file position.
-   0 - Same behavior as above, but warn about processes that perform writes
+   0   Same behavior as above, but warn about processes that perform writes
        to a sysctl file descriptor when the file position is not 0.
-   1 - (default) Respect file position when writing sysctl strings. Multiple
+   1   (default) Respect file position when writing sysctl strings. Multiple
        writes will append to the sysctl value buffer. Anything past the max
        length of the sysctl value buffer will be ignored. Writes to numeric
        sysctl entries must always be at file position 0 and the value must
        be fully contained in the buffer sent in the write syscall.
+  ==   ======================================================================
 
-==============================================================
 
 softlockup_all_cpu_backtrace:
+=============================
 
 This value controls the soft lockup detector thread's behavior
 when a soft lockup condition is detected as to whether or not
@@ -999,13 +1042,14 @@ NMI.
 
 1: on detection capture more debug information.
 
-==============================================================
 
-soft_watchdog
+soft_watchdog:
+==============
 
 This parameter can be used to control the soft lockup detector.
 
    0 - disable the soft lockup detector
+
    1 - enable the soft lockup detector
 
 The soft lockup detector monitors CPUs for threads that are hogging the CPUs
@@ -1015,9 +1059,9 @@ interrupts which are needed for the 'watchdog/N' threads to be woken up by
 the watchdog timer function, otherwise the NMI watchdog - if enabled - can
 detect a hard lockup condition.
 
-==============================================================
 
-stack_erasing
+stack_erasing:
+==============
 
 This parameter can be used to control kernel stack erasing at the end
 of syscalls for kernels built with CONFIG_GCC_PLUGIN_STACKLEAK.
@@ -1031,37 +1075,40 @@ compilation sees a 1% slowdown, other systems and workloads may vary.
 
   1: kernel stack erasing is enabled (default), it is performed before
      returning to the userspace at the end of syscalls.
-==============================================================
+
 
 tainted
+=======
 
 Non-zero if the kernel has been tainted. Numeric values, which can be
 ORed together. The letters are seen in "Tainted" line of Oops reports.
 
-     1 (P): proprietary module was loaded
-     2 (F): module was force loaded
-     4 (S): SMP kernel oops on an officially SMP incapable processor
-     8 (R): module was force unloaded
-    16 (M): processor reported a Machine Check Exception (MCE)
-    32 (B): bad page referenced or some unexpected page flags
-    64 (U): taint requested by userspace application
-   128 (D): kernel died recently, i.e. there was an OOPS or BUG
-   256 (A): an ACPI table was overridden by user
-   512 (W): kernel issued warning
-  1024 (C): staging driver was loaded
-  2048 (I): workaround for bug in platform firmware applied
-  4096 (O): externally-built ("out-of-tree") module was loaded
-  8192 (E): unsigned module was loaded
- 16384 (L): soft lockup occurred
- 32768 (K): kernel has been live patched
- 65536 (X): Auxiliary taint, defined and used by for distros
-131072 (T): The kernel was built with the struct randomization plugin
+======  =====  ==============================================================
+     1  `(P)`  proprietary module was loaded
+     2  `(F)`  module was force loaded
+     4  `(S)`  SMP kernel oops on an officially SMP incapable processor
+     8  `(R)`  module was force unloaded
+    16  `(M)`  processor reported a Machine Check Exception (MCE)
+    32  `(B)`  bad page referenced or some unexpected page flags
+    64  `(U)`  taint requested by userspace application
+   128  `(D)`  kernel died recently, i.e. there was an OOPS or BUG
+   256  `(A)`  an ACPI table was overridden by user
+   512  `(W)`  kernel issued warning
+  1024  `(C)`  staging driver was loaded
+  2048  `(I)`  workaround for bug in platform firmware applied
+  4096  `(O)`  externally-built ("out-of-tree") module was loaded
+  8192  `(E)`  unsigned module was loaded
+ 16384  `(L)`  soft lockup occurred
+ 32768  `(K)`  kernel has been live patched
+ 65536  `(X)`  Auxiliary taint, defined and used by for distros
+131072  `(T)`  The kernel was built with the struct randomization plugin
+======  =====  ==============================================================
 
 See Documentation/admin-guide/tainted-kernels.rst for more information.
 
-==============================================================
 
-threads-max
+threads-max:
+============
 
 This value controls the maximum number of threads that can be created
 using fork().
@@ -1071,8 +1118,10 @@ maximum number of threads is created, the thread structures occupy only
 a part (1/8th) of the available RAM pages.
 
 The minimum value that can be written to threads-max is 20.
+
 The maximum value that can be written to threads-max is given by the
 constant FUTEX_TID_MASK (0x3fffffff).
+
 If a value outside of this range is written to threads-max an error
 EINVAL occurs.
 
@@ -1080,9 +1129,9 @@ The value written is checked against the available RAM pages. If the
 thread structures would occupy too much (more than 1/8th) of the
 available RAM pages threads-max is reduced accordingly.
 
-==============================================================
 
 unknown_nmi_panic:
+==================
 
 The value in this file affects behavior of handling NMI. When the
 value is non-zero, unknown NMI is trapped and then panic occurs. At
@@ -1091,28 +1140,29 @@ that time, kernel debugging information is displayed on console.
 NMI switch that most IA32 servers have fires unknown NMI up, for
 example.  If a system hangs up, try pressing the NMI switch.
 
-==============================================================
 
 watchdog:
+=========
 
 This parameter can be used to disable or enable the soft lockup detector
 _and_ the NMI watchdog (i.e. the hard lockup detector) at the same time.
 
    0 - disable both lockup detectors
+
    1 - enable both lockup detectors
 
 The soft lockup detector and the NMI watchdog can also be disabled or
 enabled individually, using the soft_watchdog and nmi_watchdog parameters.
-If the watchdog parameter is read, for example by executing
+If the watchdog parameter is read, for example by executing::
 
    cat /proc/sys/kernel/watchdog
 
 the output of this command (0 or 1) shows the logical OR of soft_watchdog
 and nmi_watchdog.
 
-==============================================================
 
 watchdog_cpumask:
+=================
 
 This value can be used to control on which cpus the watchdog may run.
 The default cpumask is all possible cores, but if NO_HZ_FULL is
@@ -1127,13 +1177,13 @@ if a kernel lockup was suspected on those cores.
 
 The argument value is the standard cpulist format for cpumasks,
 so for example to enable the watchdog on cores 0, 2, 3, and 4 you
-might say:
+might say::
 
   echo 0,2-4 > /proc/sys/kernel/watchdog_cpumask
 
-==============================================================
 
 watchdog_thresh:
+================
 
 This value can be used to control the frequency of hrtimer and NMI
 events and the soft and hard lockup thresholds. The default threshold
@@ -1141,5 +1191,3 @@ is 10 seconds.
 
 The softlockup threshold is (2 * watchdog_thresh). Setting this
 tunable to zero will disable lockup detection altogether.
-
-==============================================================
diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.rst
similarity index 85%
rename from Documentation/sysctl/net.txt
rename to Documentation/sysctl/net.rst
index 2ae91d3873bb..a7d44e71019d 100644
--- a/Documentation/sysctl/net.txt
+++ b/Documentation/sysctl/net.rst
@@ -1,12 +1,25 @@
-Documentation for /proc/sys/net/*
-	(c) 1999		Terrehon Bowden <terrehon@pacbell.net>
-				Bodo Bauer <bb@ricochet.net>
-	(c) 2000		Jorge Nerin <comandante@zaralinux.com>
-	(c) 2009		Shen Feng <shen@cn.fujitsu.com>
+================================
+Documentation for /proc/sys/net/
+================================
 
-For general info and legal blurb, please look in README.
+Copyright
 
-==============================================================
+Copyright (c) 1999
+
+	- Terrehon Bowden <terrehon@pacbell.net>
+	- Bodo Bauer <bb@ricochet.net>
+
+Copyright (c) 2000
+
+	- Jorge Nerin <comandante@zaralinux.com>
+
+Copyright (c) 2009
+
+	- Shen Feng <shen@cn.fujitsu.com>
+
+For general info and legal blurb, please look in index.rst.
+
+------------------------------------------------------------------------------
 
 This file contains the documentation for the sysctl files in
 /proc/sys/net
@@ -17,20 +30,22 @@ see only some of them, depending on your kernel's configuration.
 
 
 Table : Subdirectories in /proc/sys/net
-..............................................................................
- Directory Content             Directory  Content
- core      General parameter   appletalk  Appletalk protocol
- unix      Unix domain sockets netrom     NET/ROM
- 802       E802 protocol       ax25       AX25
- ethernet  Ethernet protocol   rose       X.25 PLP layer
- ipv4      IP version 4        x25        X.25 protocol
- ipx       IPX                 token-ring IBM token ring
- bridge    Bridging            decnet     DEC net
- ipv6      IP version 6        tipc       TIPC
-..............................................................................
+
+ ========= =================== = ========== ==================
+ Directory Content               Directory  Content
+ ========= =================== = ========== ==================
+ core      General parameter     appletalk  Appletalk protocol
+ unix      Unix domain sockets   netrom     NET/ROM
+ 802       E802 protocol         ax25       AX25
+ ethernet  Ethernet protocol     rose       X.25 PLP layer
+ ipv4      IP version 4          x25        X.25 protocol
+ ipx       IPX                   token-ring IBM token ring
+ bridge    Bridging              decnet     DEC net
+ ipv6      IP version 6          tipc       TIPC
+ ========= =================== = ========== ==================
 
 1. /proc/sys/net/core - Network core options
--------------------------------------------------------
+============================================
 
 bpf_jit_enable
 --------------
@@ -44,6 +59,7 @@ restricted C into a sequence of BPF instructions. After program load
 through bpf(2) and passing a verifier in the kernel, a JIT will then
 translate these BPF proglets into native CPU instructions. There are
 two flavors of JITs, the newer eBPF JIT currently supported on:
+
   - x86_64
   - x86_32
   - arm64
@@ -55,6 +71,7 @@ two flavors of JITs, the newer eBPF JIT currently supported on:
   - riscv
 
 And the older cBPF JIT supported on the following archs:
+
   - mips
   - ppc
   - sparc
@@ -65,10 +82,11 @@ compile them transparently. Older cBPF JITs can only translate
 tcpdump filters, seccomp rules, etc, but not mentioned eBPF
 programs loaded through bpf(2).
 
-Values :
-	0 - disable the JIT (default value)
-	1 - enable the JIT
-	2 - enable the JIT and ask the compiler to emit traces on kernel log.
+Values:
+
+	- 0 - disable the JIT (default value)
+	- 1 - enable the JIT
+	- 2 - enable the JIT and ask the compiler to emit traces on kernel log.
 
 bpf_jit_harden
 --------------
@@ -76,10 +94,12 @@ bpf_jit_harden
 This enables hardening for the BPF JIT compiler. Supported are eBPF
 JIT backends. Enabling hardening trades off performance, but can
 mitigate JIT spraying.
-Values :
-	0 - disable JIT hardening (default value)
-	1 - enable JIT hardening for unprivileged users only
-	2 - enable JIT hardening for all users
+
+Values:
+
+	- 0 - disable JIT hardening (default value)
+	- 1 - enable JIT hardening for unprivileged users only
+	- 2 - enable JIT hardening for all users
 
 bpf_jit_kallsyms
 ----------------
@@ -89,9 +109,11 @@ addresses to the kernel, meaning they neither show up in traces nor
 in /proc/kallsyms. This enables export of these addresses, which can
 be used for debugging/tracing. If bpf_jit_harden is enabled, this
 feature is disabled.
+
 Values :
-	0 - disable JIT kallsyms export (default value)
-	1 - enable JIT kallsyms export for privileged users only
+
+	- 0 - disable JIT kallsyms export (default value)
+	- 1 - enable JIT kallsyms export for privileged users only
 
 bpf_jit_limit
 -------------
@@ -102,7 +124,7 @@ been surpassed. bpf_jit_limit contains the value of the global limit
 in bytes.
 
 dev_weight
---------------
+----------
 
 The maximum number of packets that kernel can handle on a NAPI interrupt,
 it's a Per-CPU variable. For drivers that support LRO or GRO_HW, a hardware
@@ -111,7 +133,7 @@ aggregated packet is counted as one packet in this context.
 Default: 64
 
 dev_weight_rx_bias
---------------
+------------------
 
 RPS (e.g. RFS, aRFS) processing is competing with the registered NAPI poll function
 of the driver for the per softirq cycle netdev_budget. This parameter influences
@@ -120,19 +142,22 @@ processing during RX softirq cycles. It is further meant for making current
 dev_weight adaptable for asymmetric CPU needs on RX/TX side of the network stack.
 (see dev_weight_tx_bias) It is effective on a per CPU basis. Determination is based
 on dev_weight and is calculated multiplicative (dev_weight * dev_weight_rx_bias).
+
 Default: 1
 
 dev_weight_tx_bias
---------------
+------------------
 
 Scales the maximum number of packets that can be processed during a TX softirq cycle.
 Effective on a per CPU basis. Allows scaling of current dev_weight for asymmetric
 net stack processing needs. Be careful to avoid making TX softirq processing a CPU hog.
+
 Calculation is based on dev_weight (dev_weight * dev_weight_tx_bias).
+
 Default: 1
 
 default_qdisc
---------------
+-------------
 
 The default queuing discipline to use for network devices. This allows
 overriding the default of pfifo_fast with an alternative. Since the default
@@ -144,17 +169,21 @@ which require setting up classes and bandwidths. Note that physical multiqueue
 interfaces still use mq as root qdisc, which in turn uses this default for its
 leaves. Virtual devices (like e.g. lo or veth) ignore this setting and instead
 default to noqueue.
+
 Default: pfifo_fast
 
 busy_read
-----------------
+---------
+
 Low latency busy poll timeout for socket reads. (needs CONFIG_NET_RX_BUSY_POLL)
 Approximate time in us to busy loop waiting for packets on the device queue.
 This sets the default value of the SO_BUSY_POLL socket option.
 Can be set or overridden per socket by setting socket option SO_BUSY_POLL,
 which is the preferred method of enabling. If you need to enable the feature
 globally via sysctl, a value of 50 is recommended.
+
 Will increase power usage.
+
 Default: 0 (off)
 
 busy_poll
@@ -167,7 +196,9 @@ For more than that you probably want to use epoll.
 Note that only sockets with SO_BUSY_POLL set will be busy polled,
 so you want to either selectively set SO_BUSY_POLL on those sockets or set
 sysctl.net.busy_read globally.
+
 Will increase power usage.
+
 Default: 0 (off)
 
 rmem_default
@@ -185,6 +216,7 @@ tstamp_allow_data
 Allow processes to receive tx timestamps looped together with the original
 packet contents. If disabled, transmit timestamp requests from unprivileged
 processes are dropped unless socket option SOF_TIMESTAMPING_OPT_TSONLY is set.
+
 Default: 1 (on)
 
 
@@ -250,19 +282,24 @@ randomly generated.
 Some user space might need to gather its content even if drivers do not
 provide ethtool -x support yet.
 
-myhost:~# cat /proc/sys/net/core/netdev_rss_key
-84:50:f4:00:a8:15:d1:a7:e9:7f:1d:60:35:c7:47:25:42:97:74:ca:56:bb:b6:a1:d8: ... (52 bytes total)
+::
+
+  myhost:~# cat /proc/sys/net/core/netdev_rss_key
+  84:50:f4:00:a8:15:d1:a7:e9:7f:1d:60:35:c7:47:25:42:97:74:ca:56:bb:b6:a1:d8: ... (52 bytes total)
 
 File contains nul bytes if no driver ever called netdev_rss_key_fill() function.
+
 Note:
-/proc/sys/net/core/netdev_rss_key contains 52 bytes of key,
-but most drivers only use 40 bytes of it.
+  /proc/sys/net/core/netdev_rss_key contains 52 bytes of key,
+  but most drivers only use 40 bytes of it.
 
-myhost:~# ethtool -x eth0
-RX flow hash indirection table for eth0 with 8 RX ring(s):
-    0:    0     1     2     3     4     5     6     7
-RSS hash key:
-84:50:f4:00:a8:15:d1:a7:e9:7f:1d:60:35:c7:47:25:42:97:74:ca:56:bb:b6:a1:d8:43:e3:c9:0c:fd:17:55:c2:3a:4d:69:ed:f1:42:89
+::
+
+  myhost:~# ethtool -x eth0
+  RX flow hash indirection table for eth0 with 8 RX ring(s):
+      0:    0     1     2     3     4     5     6     7
+  RSS hash key:
+  84:50:f4:00:a8:15:d1:a7:e9:7f:1d:60:35:c7:47:25:42:97:74:ca:56:bb:b6:a1:d8:43:e3:c9:0c:fd:17:55:c2:3a:4d:69:ed:f1:42:89
 
 netdev_tstamp_prequeue
 ----------------------
@@ -293,7 +330,7 @@ user space is responsible for creating them if needed.
 Default : 0  (for compatibility reasons)
 
 devconf_inherit_init_net
-----------------------------
+------------------------
 
 Controls if a new network namespace should inherit all current
 settings under /proc/sys/net/{ipv4,ipv6}/conf/{all,default}/. By
@@ -307,7 +344,7 @@ forced to reset to their default values.
 Default : 0  (for compatibility reasons)
 
 2. /proc/sys/net/unix - Parameters for Unix domain sockets
--------------------------------------------------------
+----------------------------------------------------------
 
 There is only one file in this directory.
 unix_dgram_qlen limits the max number of datagrams queued in Unix domain
@@ -315,13 +352,13 @@ socket's buffer. It will not take effect unless PF_UNIX flag is specified.
 
 
 3. /proc/sys/net/ipv4 - IPV4 settings
--------------------------------------------------------
+-------------------------------------
 Please see: Documentation/networking/ip-sysctl.txt and ipvs-sysctl.txt for
 descriptions of these entries.
 
 
 4. Appletalk
--------------------------------------------------------
+------------
 
 The /proc/sys/net/appletalk  directory  holds the Appletalk configuration data
 when Appletalk is loaded. The configurable parameters are:
@@ -366,7 +403,7 @@ route flags, and the device the route is using.
 
 
 5. IPX
--------------------------------------------------------
+------
 
 The IPX protocol has no tunable values in proc/sys/net.
 
@@ -391,14 +428,16 @@ gives the  destination  network, the router node (or Directly) and the network
 address of the router (or Connected) for internal networks.
 
 6. TIPC
--------------------------------------------------------
+-------
 
 tipc_rmem
-----------
+---------
 
 The TIPC protocol now has a tunable for the receive memory, similar to the
 tcp_rmem - i.e. a vector of 3 INTEGERs: (min, default, max)
 
+::
+
     # cat /proc/sys/net/tipc/tipc_rmem
     4252725 34021800        68043600
     #
@@ -409,7 +448,7 @@ is not at this point in time used in any meaningful way, but the triplet is
 preserved in order to be consistent with things like tcp_rmem.
 
 named_timeout
---------------
+-------------
 
 TIPC name table updates are distributed asynchronously in a cluster, without
 any form of transaction handling. This means that different race scenarios are
diff --git a/Documentation/sysctl/sunrpc.txt b/Documentation/sysctl/sunrpc.rst
similarity index 62%
rename from Documentation/sysctl/sunrpc.txt
rename to Documentation/sysctl/sunrpc.rst
index ae1ecac6f85a..09780a682afd 100644
--- a/Documentation/sysctl/sunrpc.txt
+++ b/Documentation/sysctl/sunrpc.rst
@@ -1,9 +1,14 @@
-Documentation for /proc/sys/sunrpc/*	kernel version 2.2.10
-	(c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
+===================================
+Documentation for /proc/sys/sunrpc/
+===================================
 
-For general info and legal blurb, please look in README.
+kernel version 2.2.10
 
-==============================================================
+Copyright (c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
+
+For general info and legal blurb, please look in index.rst.
+
+------------------------------------------------------------------------------
 
 This file contains the documentation for the sysctl files in
 /proc/sys/sunrpc and is valid for Linux kernel version 2.2.
diff --git a/Documentation/sysctl/user.txt b/Documentation/sysctl/user.rst
similarity index 77%
rename from Documentation/sysctl/user.txt
rename to Documentation/sysctl/user.rst
index a5882865836e..650eaa03f15e 100644
--- a/Documentation/sysctl/user.txt
+++ b/Documentation/sysctl/user.rst
@@ -1,7 +1,12 @@
-Documentation for /proc/sys/user/*	kernel version 4.9.0
-	(c) 2016		Eric Biederman <ebiederm@xmission.com>
+=================================
+Documentation for /proc/sys/user/
+=================================
 
-==============================================================
+kernel version 4.9.0
+
+Copyright (c) 2016		Eric Biederman <ebiederm@xmission.com>
+
+------------------------------------------------------------------------------
 
 This file contains the documentation for the sysctl files in
 /proc/sys/user.
@@ -30,37 +35,44 @@ user namespace does not allow a user to escape their current limits.
 
 Currently, these files are in /proc/sys/user:
 
-- max_cgroup_namespaces
+max_cgroup_namespaces
+=====================
 
   The maximum number of cgroup namespaces that any user in the current
   user namespace may create.
 
-- max_ipc_namespaces
+max_ipc_namespaces
+==================
 
   The maximum number of ipc namespaces that any user in the current
   user namespace may create.
 
-- max_mnt_namespaces
+max_mnt_namespaces
+==================
 
   The maximum number of mount namespaces that any user in the current
   user namespace may create.
 
-- max_net_namespaces
+max_net_namespaces
+==================
 
   The maximum number of network namespaces that any user in the
   current user namespace may create.
 
-- max_pid_namespaces
+max_pid_namespaces
+==================
 
   The maximum number of pid namespaces that any user in the current
   user namespace may create.
 
-- max_user_namespaces
+max_user_namespaces
+===================
 
   The maximum number of user namespaces that any user in the current
   user namespace may create.
 
-- max_uts_namespaces
+max_uts_namespaces
+==================
 
   The maximum number of user namespaces that any user in the current
   user namespace may create.
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.rst
similarity index 85%
rename from Documentation/sysctl/vm.txt
rename to Documentation/sysctl/vm.rst
index f10245b06b0e..e0b145dfe266 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.rst
@@ -1,10 +1,16 @@
-Documentation for /proc/sys/vm/*	kernel version 2.6.29
-	(c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
-	(c) 2008         Peter W. Morreale <pmorreale@novell.com>
+===============================
+Documentation for /proc/sys/vm/
+===============================
 
-For general info and legal blurb, please look in README.
+kernel version 2.6.29
 
-==============================================================
+Copyright (c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
+
+Copyright (c) 2008         Peter W. Morreale <pmorreale@novell.com>
+
+For general info and legal blurb, please look in index.rst.
+
+------------------------------------------------------------------------------
 
 This file contains the documentation for the sysctl files in
 /proc/sys/vm and is valid for Linux kernel version 2.6.29.
@@ -68,9 +74,9 @@ Currently, these files are in /proc/sys/vm:
 - watermark_scale_factor
 - zone_reclaim_mode
 
-==============================================================
 
 admin_reserve_kbytes
+====================
 
 The amount of free memory in the system that should be reserved for users
 with the capability cap_sys_admin.
@@ -97,25 +103,25 @@ On x86_64 this is about 128MB.
 
 Changing this takes effect whenever an application requests memory.
 
-==============================================================
 
 block_dump
+==========
 
 block_dump enables block I/O debugging when set to a nonzero value. More
 information on block I/O debugging is in Documentation/laptops/laptop-mode.rst.
 
-==============================================================
 
 compact_memory
+==============
 
 Available only when CONFIG_COMPACTION is set. When 1 is written to the file,
 all zones are compacted such that free memory is available in contiguous
 blocks where possible. This can be important for example in the allocation of
 huge pages although processes will also directly compact memory as required.
 
-==============================================================
 
 compact_unevictable_allowed
+===========================
 
 Available only when CONFIG_COMPACTION is set. When set to 1, compaction is
 allowed to examine the unevictable lru (mlocked pages) for pages to compact.
@@ -123,21 +129,22 @@ This should be used on systems where stalls for minor page faults are an
 acceptable trade for large contiguous free memory.  Set to 0 to prevent
 compaction from moving pages that are unevictable.  Default value is 1.
 
-==============================================================
 
 dirty_background_bytes
+======================
 
 Contains the amount of dirty memory at which the background kernel
 flusher threads will start writeback.
 
-Note: dirty_background_bytes is the counterpart of dirty_background_ratio. Only
-one of them may be specified at a time. When one sysctl is written it is
-immediately taken into account to evaluate the dirty memory limits and the
-other appears as 0 when read.
+Note:
+  dirty_background_bytes is the counterpart of dirty_background_ratio. Only
+  one of them may be specified at a time. When one sysctl is written it is
+  immediately taken into account to evaluate the dirty memory limits and the
+  other appears as 0 when read.
 
-==============================================================
 
 dirty_background_ratio
+======================
 
 Contains, as a percentage of total available memory that contains free pages
 and reclaimable pages, the number of pages at which the background kernel
@@ -145,9 +152,9 @@ flusher threads will start writing out dirty data.
 
 The total available memory is not equal to total system memory.
 
-==============================================================
 
 dirty_bytes
+===========
 
 Contains the amount of dirty memory at which a process generating disk writes
 will itself start writeback.
@@ -161,18 +168,18 @@ Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any
 value lower than this limit will be ignored and the old configuration will be
 retained.
 
-==============================================================
 
 dirty_expire_centisecs
+======================
 
 This tunable is used to define when dirty data is old enough to be eligible
 for writeout by the kernel flusher threads.  It is expressed in 100'ths
 of a second.  Data which has been dirty in-memory for longer than this
 interval will be written out next time a flusher thread wakes up.
 
-==============================================================
 
 dirty_ratio
+===========
 
 Contains, as a percentage of total available memory that contains free pages
 and reclaimable pages, the number of pages at which a process which is
@@ -180,9 +187,9 @@ generating disk writes will itself start writing out dirty data.
 
 The total available memory is not equal to total system memory.
 
-==============================================================
 
 dirtytime_expire_seconds
+========================
 
 When a lazytime inode is constantly having its pages dirtied, the inode with
 an updated timestamp will never get chance to be written out.  And, if the
@@ -192,34 +199,39 @@ eventually gets pushed out to disk.  This tunable is used to define when dirty
 inode is old enough to be eligible for writeback by the kernel flusher threads.
 And, it is also used as the interval to wakeup dirtytime_writeback thread.
 
-==============================================================
 
 dirty_writeback_centisecs
+=========================
 
-The kernel flusher threads will periodically wake up and write `old' data
+The kernel flusher threads will periodically wake up and write `old` data
 out to disk.  This tunable expresses the interval between those wakeups, in
 100'ths of a second.
 
 Setting this to zero disables periodic writeback altogether.
 
-==============================================================
 
 drop_caches
+===========
 
 Writing to this will cause the kernel to drop clean caches, as well as
 reclaimable slab objects like dentries and inodes.  Once dropped, their
 memory becomes free.
 
-To free pagecache:
+To free pagecache::
+
 	echo 1 > /proc/sys/vm/drop_caches
-To free reclaimable slab objects (includes dentries and inodes):
+
+To free reclaimable slab objects (includes dentries and inodes)::
+
 	echo 2 > /proc/sys/vm/drop_caches
-To free slab objects and pagecache:
+
+To free slab objects and pagecache::
+
 	echo 3 > /proc/sys/vm/drop_caches
 
 This is a non-destructive operation and will not free any dirty objects.
 To increase the number of objects freed by this operation, the user may run
-`sync' prior to writing to /proc/sys/vm/drop_caches.  This will minimize the
+`sync` prior to writing to /proc/sys/vm/drop_caches.  This will minimize the
 number of dirty objects on the system and create more candidates to be
 dropped.
 
@@ -233,16 +245,16 @@ dropped objects, especially if they were under heavy use.  Because of this,
 use outside of a testing or debugging environment is not recommended.
 
 You may see informational messages in your kernel log when this file is
-used:
+used::
 
 	cat (1234): drop_caches: 3
 
 These are informational only.  They do not mean that anything is wrong
 with your system.  To disable them, echo 4 (bit 2) into drop_caches.
 
-==============================================================
 
 extfrag_threshold
+=================
 
 This parameter affects whether the kernel will compact memory or direct
 reclaim to satisfy a high-order allocation. The extfrag/extfrag_index file in
@@ -254,9 +266,9 @@ implies that the allocation will succeed as long as watermarks are met.
 The kernel will not compact memory in a zone if the
 fragmentation index is <= extfrag_threshold. The default value is 500.
 
-==============================================================
 
 highmem_is_dirtyable
+====================
 
 Available only for systems with CONFIG_HIGHMEM enabled (32b systems).
 
@@ -274,30 +286,30 @@ OOM killer because some writers (e.g. direct block device writes) can
 only use the low memory and they can fill it up with dirty data without
 any throttling.
 
-==============================================================
 
 hugetlb_shm_group
+=================
 
 hugetlb_shm_group contains group id that is allowed to create SysV
 shared memory segment using hugetlb page.
 
-==============================================================
 
 laptop_mode
+===========
 
 laptop_mode is a knob that controls "laptop mode". All the things that are
 controlled by this knob are discussed in Documentation/laptops/laptop-mode.rst.
 
-==============================================================
 
 legacy_va_layout
+================
 
 If non-zero, this sysctl disables the new 32-bit mmap layout - the kernel
 will use the legacy (2.4) layout for all processes.
 
-==============================================================
 
 lowmem_reserve_ratio
+====================
 
 For some specialised workloads on highmem machines it is dangerous for
 the kernel to allow process memory to be allocated from the "lowmem"
@@ -308,7 +320,7 @@ And on large highmem machines this lack of reclaimable lowmem memory
 can be fatal.
 
 So the Linux page allocator has a mechanism which prevents allocations
-which _could_ use highmem from using too much lowmem.  This means that
+which *could* use highmem from using too much lowmem.  This means that
 a certain amount of lowmem is defended from the possibility of being
 captured into pinned user memory.
 
@@ -316,39 +328,37 @@ captured into pinned user memory.
 mechanism will also defend that region from allocations which could use
 highmem or lowmem).
 
-The `lowmem_reserve_ratio' tunable determines how aggressive the kernel is
+The `lowmem_reserve_ratio` tunable determines how aggressive the kernel is
 in defending these lower zones.
 
 If you have a machine which uses highmem or ISA DMA and your
 applications are using mlock(), or if you are running with no swap then
 you probably should change the lowmem_reserve_ratio setting.
 
-The lowmem_reserve_ratio is an array. You can see them by reading this file.
--
-% cat /proc/sys/vm/lowmem_reserve_ratio
-256     256     32
--
+The lowmem_reserve_ratio is an array. You can see them by reading this file::
+
+	% cat /proc/sys/vm/lowmem_reserve_ratio
+	256     256     32
 
 But, these values are not used directly. The kernel calculates # of protection
 pages for each zones from them. These are shown as array of protection pages
 in /proc/zoneinfo like followings. (This is an example of x86-64 box).
-Each zone has an array of protection pages like this.
+Each zone has an array of protection pages like this::
 
--
-Node 0, zone      DMA
-  pages free     1355
-        min      3
-        low      3
-        high     4
+  Node 0, zone      DMA
+    pages free     1355
+          min      3
+          low      3
+          high     4
 	:
 	:
-    numa_other   0
-        protection: (0, 2004, 2004, 2004)
+      numa_other   0
+          protection: (0, 2004, 2004, 2004)
 	^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-  pagesets
-    cpu: 0 pcp: 0
-        :
--
+    pagesets
+      cpu: 0 pcp: 0
+          :
+
 These protections are added to score to judge whether this zone should be used
 for page allocation or should be reclaimed.
 
@@ -359,20 +369,24 @@ not be used because pages_free(1355) is smaller than watermark + protection[2]
 normal page requirement. If requirement is DMA zone(index=0), protection[0]
 (=0) is used.
 
-zone[i]'s protection[j] is calculated by following expression.
+zone[i]'s protection[j] is calculated by following expression::
 
-(i < j):
-  zone[i]->protection[j]
-  = (total sums of managed_pages from zone[i+1] to zone[j] on the node)
-    / lowmem_reserve_ratio[i];
-(i = j):
-   (should not be protected. = 0;
-(i > j):
-   (not necessary, but looks 0)
+  (i < j):
+    zone[i]->protection[j]
+    = (total sums of managed_pages from zone[i+1] to zone[j] on the node)
+      / lowmem_reserve_ratio[i];
+  (i = j):
+     (should not be protected. = 0;
+  (i > j):
+     (not necessary, but looks 0)
 
 The default values of lowmem_reserve_ratio[i] are
+
+    === ====================================
     256 (if zone[i] means DMA or DMA32 zone)
-    32  (others).
+    32  (others)
+    === ====================================
+
 As above expression, they are reciprocal number of ratio.
 256 means 1/256. # of protection pages becomes about "0.39%" of total managed
 pages of higher zones on the node.
@@ -381,9 +395,9 @@ If you would like to protect more pages, smaller values are effective.
 The minimum value is 1 (1/1 -> 100%). The value less than 1 completely
 disables protection of the pages.
 
-==============================================================
 
 max_map_count:
+==============
 
 This file contains the maximum number of memory map areas a process
 may have. Memory map areas are used as a side-effect of calling
@@ -396,9 +410,9 @@ e.g., up to one or two maps per allocation.
 
 The default value is 65536.
 
-=============================================================
 
 memory_failure_early_kill:
+==========================
 
 Control how to kill processes when uncorrected memory error (typically
 a 2bit error in a memory module) is detected in the background by hardware
@@ -424,9 +438,9 @@ check handling and depends on the hardware capabilities.
 
 Applications can override this setting individually with the PR_MCE_KILL prctl
 
-==============================================================
 
 memory_failure_recovery
+=======================
 
 Enable memory failure recovery (when supported by the platform)
 
@@ -434,9 +448,9 @@ Enable memory failure recovery (when supported by the platform)
 
 0: Always panic on a memory failure.
 
-==============================================================
 
-min_free_kbytes:
+min_free_kbytes
+===============
 
 This is used to force the Linux VM to keep a minimum number
 of kilobytes free.  The VM uses this number to compute a
@@ -450,9 +464,9 @@ become subtly broken, and prone to deadlock under high loads.
 
 Setting this too high will OOM your machine instantly.
 
-=============================================================
 
-min_slab_ratio:
+min_slab_ratio
+==============
 
 This is available only on NUMA kernels.
 
@@ -468,9 +482,9 @@ Note that slab reclaim is triggered in a per zone / node fashion.
 The process of reclaiming slab memory is currently not node specific
 and may not be fast.
 
-=============================================================
 
-min_unmapped_ratio:
+min_unmapped_ratio
+==================
 
 This is available only on NUMA kernels.
 
@@ -485,9 +499,9 @@ files and similar are considered.
 
 The default is 1 percent.
 
-==============================================================
 
 mmap_min_addr
+=============
 
 This file indicates the amount of address space  which a user process will
 be restricted from mmapping.  Since kernel null dereference bugs could
@@ -498,9 +512,9 @@ security module.  Setting this value to something like 64k will allow the
 vast majority of applications to work correctly and provide defense in depth
 against future potential kernel bugs.
 
-==============================================================
 
-mmap_rnd_bits:
+mmap_rnd_bits
+=============
 
 This value can be used to select the number of bits to use to
 determine the random offset to the base address of vma regions
@@ -511,9 +525,9 @@ by the architecture's minimum and maximum supported values.
 This value can be changed after boot using the
 /proc/sys/vm/mmap_rnd_bits tunable
 
-==============================================================
 
-mmap_rnd_compat_bits:
+mmap_rnd_compat_bits
+====================
 
 This value can be used to select the number of bits to use to
 determine the random offset to the base address of vma regions
@@ -525,35 +539,35 @@ architecture's minimum and maximum supported values.
 This value can be changed after boot using the
 /proc/sys/vm/mmap_rnd_compat_bits tunable
 
-==============================================================
 
 nr_hugepages
+============
 
 Change the minimum size of the hugepage pool.
 
 See Documentation/admin-guide/mm/hugetlbpage.rst
 
-==============================================================
 
 nr_hugepages_mempolicy
+======================
 
 Change the size of the hugepage pool at run-time on a specific
 set of NUMA nodes.
 
 See Documentation/admin-guide/mm/hugetlbpage.rst
 
-==============================================================
 
 nr_overcommit_hugepages
+=======================
 
 Change the maximum size of the hugepage pool. The maximum is
 nr_hugepages + nr_overcommit_hugepages.
 
 See Documentation/admin-guide/mm/hugetlbpage.rst
 
-==============================================================
 
 nr_trim_pages
+=============
 
 This is available only on NOMMU kernels.
 
@@ -568,16 +582,17 @@ The default value is 1.
 
 See Documentation/nommu-mmap.rst for more information.
 
-==============================================================
 
 numa_zonelist_order
+===================
 
 This sysctl is only for NUMA and it is deprecated. Anything but
 Node order will fail!
 
 'where the memory is allocated from' is controlled by zonelists.
+
 (This documentation ignores ZONE_HIGHMEM/ZONE_DMA32 for simple explanation.
- you may be able to read ZONE_DMA as ZONE_DMA32...)
+you may be able to read ZONE_DMA as ZONE_DMA32...)
 
 In non-NUMA case, a zonelist for GFP_KERNEL is ordered as following.
 ZONE_NORMAL -> ZONE_DMA
@@ -585,10 +600,10 @@ This means that a memory allocation request for GFP_KERNEL will
 get memory from ZONE_DMA only when ZONE_NORMAL is not available.
 
 In NUMA case, you can think of following 2 types of order.
-Assume 2 node NUMA and below is zonelist of Node(0)'s GFP_KERNEL
+Assume 2 node NUMA and below is zonelist of Node(0)'s GFP_KERNEL::
 
-(A) Node(0) ZONE_NORMAL -> Node(0) ZONE_DMA -> Node(1) ZONE_NORMAL
-(B) Node(0) ZONE_NORMAL -> Node(1) ZONE_NORMAL -> Node(0) ZONE_DMA.
+  (A) Node(0) ZONE_NORMAL -> Node(0) ZONE_DMA -> Node(1) ZONE_NORMAL
+  (B) Node(0) ZONE_NORMAL -> Node(1) ZONE_NORMAL -> Node(0) ZONE_DMA.
 
 Type(A) offers the best locality for processes on Node(0), but ZONE_DMA
 will be used before ZONE_NORMAL exhaustion. This increases possibility of
@@ -616,9 +631,9 @@ order will be selected.
 Default order is recommended unless this is causing problems for your
 system/application.
 
-==============================================================
 
 oom_dump_tasks
+==============
 
 Enables a system-wide task dump (excluding kernel threads) to be produced
 when the kernel performs an OOM-killing and includes such information as
@@ -638,9 +653,9 @@ OOM killer actually kills a memory-hogging task.
 
 The default value is 1 (enabled).
 
-==============================================================
 
 oom_kill_allocating_task
+========================
 
 This enables or disables killing the OOM-triggering task in
 out-of-memory situations.
@@ -659,9 +674,9 @@ is used in oom_kill_allocating_task.
 
 The default value is 0.
 
-==============================================================
 
-overcommit_kbytes:
+overcommit_kbytes
+=================
 
 When overcommit_memory is set to 2, the committed address space is not
 permitted to exceed swap plus this amount of physical RAM. See below.
@@ -670,9 +685,9 @@ Note: overcommit_kbytes is the counterpart of overcommit_ratio. Only one
 of them may be specified at a time. Setting one disables the other (which
 then appears as 0 when read).
 
-==============================================================
 
-overcommit_memory:
+overcommit_memory
+=================
 
 This value contains a flag that enables memory overcommitment.
 
@@ -695,17 +710,17 @@ The default value is 0.
 See Documentation/vm/overcommit-accounting.rst and
 mm/util.c::__vm_enough_memory() for more information.
 
-==============================================================
 
-overcommit_ratio:
+overcommit_ratio
+================
 
 When overcommit_memory is set to 2, the committed address
 space is not permitted to exceed swap plus this percentage
 of physical RAM.  See above.
 
-==============================================================
 
 page-cluster
+============
 
 page-cluster controls the number of pages up to which consecutive pages
 are read in from swap in a single attempt. This is the swap counterpart
@@ -725,9 +740,9 @@ Lower values mean lower latencies for initial faults, but at the same time
 extra faults and I/O delays for following faults if they would have been part of
 that consecutive pages readahead would have brought in.
 
-=============================================================
 
 panic_on_oom
+============
 
 This enables or disables panic on out-of-memory feature.
 
@@ -747,14 +762,16 @@ above-mentioned. Even oom happens under memory cgroup, the whole
 system panics.
 
 The default value is 0.
+
 1 and 2 are for failover of clustering. Please select either
 according to your policy of failover.
+
 panic_on_oom=2+kdump gives you very strong tool to investigate
 why oom happens. You can get snapshot.
 
-=============================================================
 
 percpu_pagelist_fraction
+========================
 
 This is the fraction of pages at most (high mark pcp->high) in each zone that
 are allocated for each per cpu page list.  The min value for this is 8.  It
@@ -770,16 +787,16 @@ The initial value is zero.  Kernel does not use this value at boot time to set
 the high water marks for each per cpu page list.  If the user writes '0' to this
 sysctl, it will revert to this default behavior.
 
-==============================================================
 
 stat_interval
+=============
 
 The time interval between which vm statistics are updated.  The default
 is 1 second.
 
-==============================================================
 
 stat_refresh
+============
 
 Any read or write (by root only) flushes all the per-cpu vm statistics
 into their global totals, for more accurate reports when testing
@@ -790,24 +807,26 @@ as 0) and "fails" with EINVAL if any are found, with a warning in dmesg.
 (At time of writing, a few stats are known sometimes to be found negative,
 with no ill effects: errors and warnings on these stats are suppressed.)
 
-==============================================================
 
 numa_stat
+=========
 
 This interface allows runtime configuration of numa statistics.
 
 When page allocation performance becomes a bottleneck and you can tolerate
 some possible tool breakage and decreased numa counter precision, you can
-do:
+do::
+
 	echo 0 > /proc/sys/vm/numa_stat
 
 When page allocation performance is not a bottleneck and you want all
-tooling to work, you can do:
+tooling to work, you can do::
+
 	echo 1 > /proc/sys/vm/numa_stat
 
-==============================================================
 
 swappiness
+==========
 
 This control is used to define how aggressive the kernel will swap
 memory pages.  Higher values will increase aggressiveness, lower values
@@ -817,9 +836,9 @@ than the high water mark in a zone.
 
 The default value is 60.
 
-==============================================================
 
 unprivileged_userfaultfd
+========================
 
 This flag controls whether unprivileged users can use the userfaultfd
 system calls.  Set this to 1 to allow unprivileged users to use the
@@ -828,9 +847,9 @@ privileged users (with SYS_CAP_PTRACE capability).
 
 The default value is 1.
 
-==============================================================
 
-- user_reserve_kbytes
+user_reserve_kbytes
+===================
 
 When overcommit_memory is set to 2, "never overcommit" mode, reserve
 min(3% of current process size, user_reserve_kbytes) of free memory.
@@ -846,10 +865,9 @@ Any subsequent attempts to execute a command will result in
 
 Changing this takes effect whenever an application requests memory.
 
-==============================================================
 
 vfs_cache_pressure
-------------------
+==================
 
 This percentage value controls the tendency of the kernel to reclaim
 the memory which is used for caching of directory and inode objects.
@@ -867,9 +885,9 @@ performance impact. Reclaim code needs to take various locks to find freeable
 directory and inode objects. With vfs_cache_pressure=1000, it will look for
 ten times more freeable objects than there are.
 
-=============================================================
 
-watermark_boost_factor:
+watermark_boost_factor
+======================
 
 This factor controls the level of reclaim when memory is being fragmented.
 It defines the percentage of the high watermark of a zone that will be
@@ -887,9 +905,9 @@ recent past. If this value is smaller than a pageblock then a pageblocks
 worth of pages will be reclaimed (e.g.  2MB on 64-bit x86). A boost factor
 of 0 will disable the feature.
 
-=============================================================
 
-watermark_scale_factor:
+watermark_scale_factor
+======================
 
 This factor controls the aggressiveness of kswapd. It defines the
 amount of memory left in a node/system before kswapd is woken up and
@@ -905,20 +923,22 @@ that the number of free pages kswapd maintains for latency reasons is
 too small for the allocation bursts occurring in the system. This knob
 can then be used to tune kswapd aggressiveness accordingly.
 
-==============================================================
 
-zone_reclaim_mode:
+zone_reclaim_mode
+=================
 
 Zone_reclaim_mode allows someone to set more or less aggressive approaches to
 reclaim memory when a zone runs out of memory. If it is set to zero then no
 zone reclaim occurs. Allocations will be satisfied from other zones / nodes
 in the system.
 
-This is value ORed together of
+This is value OR'ed together of
 
-1	= Zone reclaim on
-2	= Zone reclaim writes dirty pages out
-4	= Zone reclaim swaps pages
+=	===================================
+1	Zone reclaim on
+2	Zone reclaim writes dirty pages out
+4	Zone reclaim swaps pages
+=	===================================
 
 zone_reclaim_mode is disabled by default.  For file servers or workloads
 that benefit from having their data cached, zone_reclaim_mode should be
@@ -942,5 +962,3 @@ of other processes running on other nodes will not be affected.
 Allowing regular swap effectively restricts allocations to the local
 node unless explicitly overridden by memory policies or cpuset
 configurations.
-
-============ End of Document =================================
diff --git a/Documentation/vm/unevictable-lru.rst b/Documentation/vm/unevictable-lru.rst
index c6d94118fbcc..8ba656f37cd8 100644
--- a/Documentation/vm/unevictable-lru.rst
+++ b/Documentation/vm/unevictable-lru.rst
@@ -439,7 +439,7 @@ Compacting MLOCKED Pages
 
 The unevictable LRU can be scanned for compactable regions and the default
 behavior is to do so.  /proc/sys/vm/compact_unevictable_allowed controls
-this behavior (see Documentation/sysctl/vm.txt).  Once scanning of the
+this behavior (see Documentation/sysctl/vm.rst).  Once scanning of the
 unevictable LRU is enabled, the work of compaction is mostly handled by
 the page migration code and the same work flow as described in MIGRATING
 MLOCKED PAGES will apply.
diff --git a/kernel/panic.c b/kernel/panic.c
index cd73af35ec66..63ee20704fe6 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -372,7 +372,7 @@ const struct taint_flag taint_flags[TAINT_FLAGS_COUNT] = {
 /**
  * print_tainted - return a string to represent the kernel taint state.
  *
- * For individual taint flag meanings, see Documentation/sysctl/kernel.txt
+ * For individual taint flag meanings, see Documentation/sysctl/kernel.rst
  *
  * The string is overwritten by the next call to print_tainted(),
  * but is always NULL terminated.
diff --git a/mm/swap.c b/mm/swap.c
index 3a75722e68a9..6fa43f17bcbc 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -7,7 +7,7 @@
 /*
  * This file contains the default values for the operation of the
  * Linux VM subsystem. Fine-tuning documentation can be found in
- * Documentation/sysctl/vm.txt.
+ * Documentation/sysctl/vm.rst.
  * Started 18.12.91
  * Swap aging added 23.2.95, Stephen Tweedie.
  * Buffermem limits added 12.3.98, Rik van Riel.
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* [PATCH v2 79/79] docs: block: convert to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (74 preceding siblings ...)
  2019-04-22 13:28   ` [PATCH v2 78/79] docs: sysctl: " Mauro Carvalho Chehab
@ 2019-04-22 13:28   ` Mauro Carvalho Chehab
  2019-04-22 14:51   ` [PATCH v2 00/79] Convert files " Mauro Carvalho Chehab
       [not found]   ` <cda57849a6462ccc72dcd360b30068ab6a1021c4.1555938376.git.mchehab+samsung@kernel.org>
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 13:28 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Paolo Valente, Jens Axboe, Minchan Kim,
	Nitin Gupta, Sergey Senozhatsky, linux-block

Rename the block documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 .../admin-guide/kernel-parameters.txt         |   8 +-
 .../{bfq-iosched.txt => bfq-iosched.rst}      |  66 ++--
 .../block/{biodoc.txt => biodoc.rst}          | 363 +++++++++++-------
 .../block/{biovecs.txt => biovecs.rst}        |  20 +-
 Documentation/block/capability.rst            |  18 +
 Documentation/block/capability.txt            |  15 -
 ...ne-partition.txt => cmdline-partition.rst} |  13 +-
 ...{data-integrity.txt => data-integrity.rst} |  58 +--
 ...dline-iosched.txt => deadline-iosched.rst} |  19 +-
 Documentation/block/index.rst                 |  25 ++
 .../block/{ioprio.txt => ioprio.rst}          |  95 +++--
 .../{kyber-iosched.txt => kyber-iosched.rst}  |   3 +-
 .../block/{null_blk.txt => null_blk.rst}      |  65 +++-
 Documentation/block/{pr.txt => pr.rst}        |  14 +-
 .../{queue-sysfs.txt => queue-sysfs.rst}      |   7 +-
 .../block/{request.txt => request.rst}        |  47 ++-
 Documentation/block/{stat.txt => stat.rst}    |  13 +-
 ...witching-sched.txt => switching-sched.rst} |  28 +-
 ...ontrol.txt => writeback_cache_control.rst} |  12 +-
 Documentation/blockdev/zram.rst               |   2 +-
 MAINTAINERS                                   |   2 +-
 block/Kconfig                                 |   2 +-
 block/Kconfig.iosched                         |   2 +-
 block/bfq-iosched.c                           |   2 +-
 block/blk-integrity.c                         |   2 +-
 block/ioprio.c                                |   2 +-
 block/mq-deadline.c                           |   2 +-
 block/partitions/cmdline.c                    |   2 +-
 28 files changed, 555 insertions(+), 352 deletions(-)
 rename Documentation/block/{bfq-iosched.txt => bfq-iosched.rst} (95%)
 rename Documentation/block/{biodoc.txt => biodoc.rst} (83%)
 rename Documentation/block/{biovecs.txt => biovecs.rst} (92%)
 create mode 100644 Documentation/block/capability.rst
 delete mode 100644 Documentation/block/capability.txt
 rename Documentation/block/{cmdline-partition.txt => cmdline-partition.rst} (92%)
 rename Documentation/block/{data-integrity.txt => data-integrity.rst} (92%)
 rename Documentation/block/{deadline-iosched.txt => deadline-iosched.rst} (89%)
 create mode 100644 Documentation/block/index.rst
 rename Documentation/block/{ioprio.txt => ioprio.rst} (75%)
 rename Documentation/block/{kyber-iosched.txt => kyber-iosched.rst} (86%)
 rename Documentation/block/{null_blk.txt => null_blk.rst} (60%)
 rename Documentation/block/{pr.txt => pr.rst} (95%)
 rename Documentation/block/{queue-sysfs.txt => queue-sysfs.rst} (99%)
 rename Documentation/block/{request.txt => request.rst} (59%)
 rename Documentation/block/{stat.txt => stat.rst} (89%)
 rename Documentation/block/{switching-sched.txt => switching-sched.rst} (71%)
 rename Documentation/block/{writeback_cache_control.txt => writeback_cache_control.rst} (94%)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 30689c08bdc3..2849fbde8c8f 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -430,7 +430,7 @@
 
 	blkdevparts=	Manual partition parsing of block device(s) for
 			embedded devices based on command line input.
-			See Documentation/block/cmdline-partition.txt
+			See Documentation/block/cmdline-partition.rst
 
 	boot_delay=	Milliseconds to delay each printk during boot.
 			Values larger than 10 seconds (10000) are changed to
@@ -1198,9 +1198,9 @@
 
 	elevator=	[IOSCHED]
 			Format: { "mq-deadline" | "kyber" | "bfq" }
-			See Documentation/block/deadline-iosched.txt,
-			Documentation/block/kyber-iosched.txt and
-			Documentation/block/bfq-iosched.txt for details.
+			See Documentation/block/deadline-iosched.rst,
+			Documentation/block/kyber-iosched.rst and
+			Documentation/block/bfq-iosched.rst for details.
 
 	elfcorehdr=[size[KMG]@]offset[KMG] [IA64,PPC,SH,X86,S390]
 			Specifies physical address of start of kernel core
diff --git a/Documentation/block/bfq-iosched.txt b/Documentation/block/bfq-iosched.rst
similarity index 95%
rename from Documentation/block/bfq-iosched.txt
rename to Documentation/block/bfq-iosched.rst
index b2265cf6c9c3..3fd9e8029347 100644
--- a/Documentation/block/bfq-iosched.txt
+++ b/Documentation/block/bfq-iosched.rst
@@ -1,9 +1,11 @@
+==========================
 BFQ (Budget Fair Queueing)
 ==========================
 
 BFQ is a proportional-share I/O scheduler, with some extra
 low-latency capabilities. In addition to cgroups support (blkio or io
 controllers), BFQ's main features are:
+
 - BFQ guarantees a high system and application responsiveness, and a
   low latency for time-sensitive applications, such as audio or video
   players;
@@ -55,18 +57,18 @@ sustainable throughputs, on the same systems as above:
 
 BFQ works for multi-queue devices too.
 
-The table of contents follow. Impatients can just jump to Section 3.
+.. The table of contents follow. Impatients can just jump to Section 3.
 
-CONTENTS
+.. CONTENTS
 
-1. When may BFQ be useful?
- 1-1 Personal systems
- 1-2 Server systems
-2. How does BFQ work?
-3. What are BFQ's tunables and how to properly configure BFQ?
-4. BFQ group scheduling
- 4-1 Service guarantees provided
- 4-2 Interface
+   1. When may BFQ be useful?
+    1-1 Personal systems
+    1-2 Server systems
+   2. How does BFQ work?
+   3. What are BFQ's tunables and how to properly configure BFQ?
+   4. BFQ group scheduling
+    4-1 Service guarantees provided
+    4-2 Interface
 
 1. When may BFQ be useful?
 ==========================
@@ -77,17 +79,20 @@ BFQ provides the following benefits on personal and server systems.
 --------------------
 
 Low latency for interactive applications
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Regardless of the actual background workload, BFQ guarantees that, for
 interactive tasks, the storage device is virtually as responsive as if
 it was idle. For example, even if one or more of the following
 background workloads are being executed:
+
 - one or more large files are being read, written or copied,
 - a tree of source files is being compiled,
 - one or more virtual machines are performing I/O,
 - a software update is in progress,
 - indexing daemons are scanning filesystems and updating their
   databases,
+
 starting an application or loading a file from within an application
 takes about the same time as if the storage device was idle. As a
 comparison, with CFQ, NOOP or DEADLINE, and in the same conditions,
@@ -95,13 +100,14 @@ applications experience high latencies, or even become unresponsive
 until the background workload terminates (also on SSDs).
 
 Low latency for soft real-time applications
-
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Also soft real-time applications, such as audio and video
 players/streamers, enjoy a low latency and a low drop rate, regardless
 of the background I/O workload. As a consequence, these applications
 do not suffer from almost any glitch due to the background workload.
 
 Higher speed for code-development tasks
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 If some additional workload happens to be executed in parallel, then
 BFQ executes the I/O-related components of typical code-development
@@ -109,6 +115,7 @@ tasks (compilation, checkout, merge, ...) much more quickly than CFQ,
 NOOP or DEADLINE.
 
 High throughput
+^^^^^^^^^^^^^^^
 
 On hard disks, BFQ achieves up to 30% higher throughput than CFQ, and
 up to 150% higher throughput than DEADLINE and NOOP, with all the
@@ -117,6 +124,7 @@ and with all the workloads on flash-based devices, BFQ achieves,
 instead, about the same throughput as the other schedulers.
 
 Strong fairness, bandwidth and delay guarantees
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 BFQ distributes the device throughput, and not just the device time,
 among I/O-bound applications in proportion their weights, with any
@@ -133,15 +141,15 @@ Most benefits for server systems follow from the same service
 properties as above. In particular, regardless of whether additional,
 possibly heavy workloads are being served, BFQ guarantees:
 
-. audio and video-streaming with zero or very low jitter and drop
+* audio and video-streaming with zero or very low jitter and drop
   rate;
 
-. fast retrieval of WEB pages and embedded objects;
+* fast retrieval of WEB pages and embedded objects;
 
-. real-time recording of data in live-dumping applications (e.g.,
+* real-time recording of data in live-dumping applications (e.g.,
   packet logging);
 
-. responsiveness in local and remote access to a server.
+* responsiveness in local and remote access to a server.
 
 
 2. How does BFQ work?
@@ -151,7 +159,7 @@ BFQ is a proportional-share I/O scheduler, whose general structure,
 plus a lot of code, are borrowed from CFQ.
 
 - Each process doing I/O on a device is associated with a weight and a
-  (bfq_)queue.
+  `(bfq_)queue`.
 
 - BFQ grants exclusive access to the device, for a while, to one queue
   (process) at a time, and implements this service model by
@@ -540,11 +548,12 @@ created, and kept up-to-date by bfq, depends on whether
 CONFIG_DEBUG_BLK_CGROUP is set. If it is set, then bfq creates all
 the stat files documented in
 Documentation/cgroup-v1/blkio-controller.rst. If, instead,
-CONFIG_DEBUG_BLK_CGROUP is not set, then bfq creates only the files
-blkio.bfq.io_service_bytes
-blkio.bfq.io_service_bytes_recursive
-blkio.bfq.io_serviced
-blkio.bfq.io_serviced_recursive
+CONFIG_DEBUG_BLK_CGROUP is not set, then bfq creates only the files::
+
+  blkio.bfq.io_service_bytes
+  blkio.bfq.io_service_bytes_recursive
+  blkio.bfq.io_serviced
+  blkio.bfq.io_serviced_recursive
 
 The value of CONFIG_DEBUG_BLK_CGROUP greatly influences the maximum
 throughput sustainable with bfq, because updating the blkio.bfq.*
@@ -567,17 +576,22 @@ weight of the queues associated with interactive and soft real-time
 applications. Unset this tunable if you need/want to control weights.
 
 
-[1] P. Valente, A. Avanzini, "Evolution of the BFQ Storage I/O
+[1]
+    P. Valente, A. Avanzini, "Evolution of the BFQ Storage I/O
     Scheduler", Proceedings of the First Workshop on Mobile System
     Technologies (MST-2015), May 2015.
+
     http://algogroup.unimore.it/people/paolo/disk_sched/mst-2015.pdf
 
-[2] P. Valente and M. Andreolini, "Improving Application
+[2]
+    P. Valente and M. Andreolini, "Improving Application
     Responsiveness with the BFQ Disk I/O Scheduler", Proceedings of
     the 5th Annual International Systems and Storage Conference
     (SYSTOR '12), June 2012.
+
     Slightly extended version:
-    http://algogroup.unimore.it/people/paolo/disk_sched/bfq-v1-suite-
-							results.pdf
 
-[3] https://github.com/Algodev-github/S
+    http://algogroup.unimore.it/people/paolo/disk_sched/bfq-v1-suite-results.pdf
+
+[3]
+   https://github.com/Algodev-github/S
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.rst
similarity index 83%
rename from Documentation/block/biodoc.txt
rename to Documentation/block/biodoc.rst
index ac504de0cb93..f3ee3e298a0a 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.rst
@@ -1,15 +1,24 @@
-	Notes on the Generic Block Layer Rewrite in Linux 2.5
-	=====================================================
+=====================================================
+Notes on the Generic Block Layer Rewrite in Linux 2.5
+=====================================================
+
+.. note::
+
+	It seems that there are lot of outdated stuff here. This seems
+	to be written somewhat as a task list. Yet, eventually, something
+	here might still be useful.
 
 Notes Written on Jan 15, 2002:
-	Jens Axboe <jens.axboe@oracle.com>
-	Suparna Bhattacharya <suparna@in.ibm.com>
+	- Jens Axboe <jens.axboe@oracle.com>
+	- Suparna Bhattacharya <suparna@in.ibm.com>
 
 Last Updated May 2, 2002
+
 September 2003: Updated I/O Scheduler portions
-	Nick Piggin <npiggin@kernel.dk>
+	- Nick Piggin <npiggin@kernel.dk>
 
-Introduction:
+Introduction
+============
 
 These are some notes describing some aspects of the 2.5 block layer in the
 context of the bio rewrite. The idea is to bring out some of the key
@@ -17,11 +26,11 @@ changes and a glimpse of the rationale behind those changes.
 
 Please mail corrections & suggestions to suparna@in.ibm.com.
 
-Credits:
----------
+Credits
+=======
 
 2.5 bio rewrite:
-	Jens Axboe <jens.axboe@oracle.com>
+	- Jens Axboe <jens.axboe@oracle.com>
 
 Many aspects of the generic block layer redesign were driven by and evolved
 over discussions, prior patches and the collective experience of several
@@ -29,62 +38,63 @@ people. See sections 8 and 9 for a list of some related references.
 
 The following people helped with review comments and inputs for this
 document:
-	Christoph Hellwig <hch@infradead.org>
-	Arjan van de Ven <arjanv@redhat.com>
-	Randy Dunlap <rdunlap@xenotime.net>
-	Andre Hedrick <andre@linux-ide.org>
+
+	- Christoph Hellwig <hch@infradead.org>
+	- Arjan van de Ven <arjanv@redhat.com>
+	- Randy Dunlap <rdunlap@xenotime.net>
+	- Andre Hedrick <andre@linux-ide.org>
 
 The following people helped with fixes/contributions to the bio patches
 while it was still work-in-progress:
-	David S. Miller <davem@redhat.com>
 
+	- David S. Miller <davem@redhat.com>
 
-Description of Contents:
-------------------------
 
-1. Scope for tuning of logic to various needs
-  1.1 Tuning based on device or low level driver capabilities
+.. Description of Contents:
+
+   1. Scope for tuning of logic to various needs
+     1.1 Tuning based on device or low level driver capabilities
 	- Per-queue parameters
 	- Highmem I/O support
 	- I/O scheduler modularization
-  1.2 Tuning based on high level requirements/capabilities
+     1.2 Tuning based on high level requirements/capabilities
 	1.2.1 Request Priority/Latency
-  1.3 Direct access/bypass to lower layers for diagnostics and special
-      device operations
+     1.3 Direct access/bypass to lower layers for diagnostics and special
+	 device operations
 	1.3.1 Pre-built commands
-2. New flexible and generic but minimalist i/o structure or descriptor
-   (instead of using buffer heads at the i/o layer)
-  2.1 Requirements/Goals addressed
-  2.2 The bio struct in detail (multi-page io unit)
-  2.3 Changes in the request structure
-3. Using bios
-  3.1 Setup/teardown (allocation, splitting)
-  3.2 Generic bio helper routines
-    3.2.1 Traversing segments and completion units in a request
-    3.2.2 Setting up DMA scatterlists
-    3.2.3 I/O completion
-    3.2.4 Implications for drivers that do not interpret bios (don't handle
- 	  multiple segments)
-  3.3 I/O submission
-4. The I/O scheduler
-5. Scalability related changes
-  5.1 Granular locking: Removal of io_request_lock
-  5.2 Prepare for transition to 64 bit sector_t
-6. Other Changes/Implications
-  6.1 Partition re-mapping handled by the generic block layer
-7. A few tips on migration of older drivers
-8. A list of prior/related/impacted patches/ideas
-9. Other References/Discussion Threads
+   2. New flexible and generic but minimalist i/o structure or descriptor
+      (instead of using buffer heads at the i/o layer)
+     2.1 Requirements/Goals addressed
+     2.2 The bio struct in detail (multi-page io unit)
+     2.3 Changes in the request structure
+   3. Using bios
+     3.1 Setup/teardown (allocation, splitting)
+     3.2 Generic bio helper routines
+       3.2.1 Traversing segments and completion units in a request
+       3.2.2 Setting up DMA scatterlists
+       3.2.3 I/O completion
+       3.2.4 Implications for drivers that do not interpret bios (don't handle
+	  multiple segments)
+     3.3 I/O submission
+   4. The I/O scheduler
+   5. Scalability related changes
+     5.1 Granular locking: Removal of io_request_lock
+     5.2 Prepare for transition to 64 bit sector_t
+   6. Other Changes/Implications
+     6.1 Partition re-mapping handled by the generic block layer
+   7. A few tips on migration of older drivers
+   8. A list of prior/related/impacted patches/ideas
+   9. Other References/Discussion Threads
 
----------------------------------------------------------------------------
 
 Bio Notes
---------
+=========
 
 Let us discuss the changes in the context of how some overall goals for the
 block layer are addressed.
 
 1. Scope for tuning the generic logic to satisfy various requirements
+=====================================================================
 
 The block layer design supports adaptable abstractions to handle common
 processing with the ability to tune the logic to an appropriate extent
@@ -97,6 +107,7 @@ and application/middleware software designed to take advantage of these
 capabilities.
 
 1.1 Tuning based on low level device / driver capabilities
+----------------------------------------------------------
 
 Sophisticated devices with large built-in caches, intelligent i/o scheduling
 optimizations, high memory DMA support, etc may find some of the
@@ -133,12 +144,12 @@ Some new queue property settings:
 		Sets two variables that limit the size of the request.
 
 		- The request queue's max_sectors, which is a soft size in
-		units of 512 byte sectors, and could be dynamically varied
-		by the core kernel.
+		  units of 512 byte sectors, and could be dynamically varied
+		  by the core kernel.
 
 		- The request queue's max_hw_sectors, which is a hard limit
-		and reflects the maximum size request a driver can handle
-		in units of 512 byte sectors.
+		  and reflects the maximum size request a driver can handle
+		  in units of 512 byte sectors.
 
 		The default for both max_sectors and max_hw_sectors is
 		255. The upper limit of max_sectors is 1024.
@@ -234,6 +245,7 @@ I/O scheduler wrappers are to be used instead of accessing the queue directly.
 See section 4. The I/O scheduler for details.
 
 1.2 Tuning Based on High level code capabilities
+------------------------------------------------
 
 i. Application capabilities for raw i/o
 
@@ -258,9 +270,11 @@ would need an additional mechanism either via open flags or ioctls, or some
 other upper level mechanism to communicate such settings to block.
 
 1.2.1 Request Priority/Latency
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-Todo/Under discussion:
-Arjan's proposed request priority scheme allows higher levels some broad
+Todo/Under discussion::
+
+  Arjan's proposed request priority scheme allows higher levels some broad
   control (high/med/low) over the priority  of an i/o request vs other pending
   requests in the queue. For example it allows reads for bringing in an
   executable page on demand to be given a higher priority over pending write
@@ -272,7 +286,9 @@ Arjan's proposed request priority scheme allows higher levels some broad
 
 
 1.3 Direct Access to Low level Device/Driver Capabilities (Bypass mode)
-    (e.g Diagnostics, Systems Management)
+-----------------------------------------------------------------------
+
+(e.g Diagnostics, Systems Management)
 
 There are situations where high-level code needs to have direct access to
 the low level device capabilities or requires the ability to issue commands
@@ -308,28 +324,32 @@ involved. In the latter case, the driver would modify and manage the
 request->buffer, request->sector and request->nr_sectors or
 request->current_nr_sectors fields itself rather than using the block layer
 end_request or end_that_request_first completion interfaces.
-(See 2.3 or Documentation/block/request.txt for a brief explanation of
+(See 2.3 or Documentation/block/request.rst for a brief explanation of
 the request structure fields)
 
-[TBD: end_that_request_last should be usable even in this case;
-Perhaps an end_that_direct_request_first routine could be implemented to make
-handling direct requests easier for such drivers; Also for drivers that
-expect bios, a helper function could be provided for setting up a bio
-corresponding to a data buffer]
+::
 
-<JENS: I dont understand the above, why is end_that_request_first() not
-usable? Or _last for that matter. I must be missing something>
-<SUP: What I meant here was that if the request doesn't have a bio, then
- end_that_request_first doesn't modify nr_sectors or current_nr_sectors,
- and hence can't be used for advancing request state settings on the
- completion of partial transfers. The driver has to modify these fields 
- directly by hand.
- This is because end_that_request_first only iterates over the bio list,
- and always returns 0 if there are none associated with the request.
- _last works OK in this case, and is not a problem, as I mentioned earlier
->
+  [TBD: end_that_request_last should be usable even in this case;
+  Perhaps an end_that_direct_request_first routine could be implemented to make
+  handling direct requests easier for such drivers; Also for drivers that
+  expect bios, a helper function could be provided for setting up a bio
+  corresponding to a data buffer]
+
+  <JENS: I dont understand the above, why is end_that_request_first() not
+  usable? Or _last for that matter. I must be missing something>
+
+  <SUP: What I meant here was that if the request doesn't have a bio, then
+   end_that_request_first doesn't modify nr_sectors or current_nr_sectors,
+   and hence can't be used for advancing request state settings on the
+   completion of partial transfers. The driver has to modify these fields
+   directly by hand.
+   This is because end_that_request_first only iterates over the bio list,
+   and always returns 0 if there are none associated with the request.
+   _last works OK in this case, and is not a problem, as I mentioned earlier
+  >
 
 1.3.1 Pre-built Commands
+^^^^^^^^^^^^^^^^^^^^^^^^
 
 A request can be created with a pre-built custom command  to be sent directly
 to the device. The cmd block in the request structure has room for filling
@@ -360,9 +380,11 @@ Aside:
   the pre-builder hook can be invoked there.
 
 
-2. Flexible and generic but minimalist i/o structure/descriptor.
+2. Flexible and generic but minimalist i/o structure/descriptor
+===============================================================
 
 2.1 Reason for a new structure and requirements addressed
+---------------------------------------------------------
 
 Prior to 2.5, buffer heads were used as the unit of i/o at the generic block
 layer, and the low level request structure was associated with a chain of
@@ -378,26 +400,26 @@ which were generated for each such chunk.
 The following were some of the goals and expectations considered in the
 redesign of the block i/o data structure in 2.5.
 
-i.  Should be appropriate as a descriptor for both raw and buffered i/o  -
+1.  Should be appropriate as a descriptor for both raw and buffered i/o  -
     avoid cache related fields which are irrelevant in the direct/page i/o path,
     or filesystem block size alignment restrictions which may not be relevant
     for raw i/o.
-ii. Ability to represent high-memory buffers (which do not have a virtual
+2.  Ability to represent high-memory buffers (which do not have a virtual
     address mapping in kernel address space).
-iii.Ability to represent large i/os w/o unnecessarily breaking them up (i.e
+3.  Ability to represent large i/os w/o unnecessarily breaking them up (i.e
     greater than PAGE_SIZE chunks in one shot)
-iv. At the same time, ability to retain independent identity of i/os from
+4.  At the same time, ability to retain independent identity of i/os from
     different sources or i/o units requiring individual completion (e.g. for
     latency reasons)
-v.  Ability to represent an i/o involving multiple physical memory segments
+5.  Ability to represent an i/o involving multiple physical memory segments
     (including non-page aligned page fragments, as specified via readv/writev)
     without unnecessarily breaking it up, if the underlying device is capable of
     handling it.
-vi. Preferably should be based on a memory descriptor structure that can be
+6.  Preferably should be based on a memory descriptor structure that can be
     passed around different types of subsystems or layers, maybe even
     networking, without duplication or extra copies of data/descriptor fields
     themselves in the process
-vii.Ability to handle the possibility of splits/merges as the structure passes
+7.  Ability to handle the possibility of splits/merges as the structure passes
     through layered drivers (lvm, md, evms), with minimal overhead.
 
 The solution was to define a new structure (bio)  for the block layer,
@@ -408,6 +430,7 @@ bh structure for buffered i/o, and in the case of raw/direct i/o kiobufs are
 mapped to bio structures.
 
 2.2 The bio struct
+------------------
 
 The bio structure uses a vector representation pointing to an array of tuples
 of <page, offset, len> to describe the i/o buffer, and has various other
@@ -417,34 +440,36 @@ performing the i/o.
 Notice that this representation means that a bio has no virtual address
 mapping at all (unlike buffer heads).
 
-struct bio_vec {
-       struct page     *bv_page;
-       unsigned short  bv_len;
-       unsigned short  bv_offset;
-};
+::
 
-/*
- * main unit of I/O for the block layer and lower layers (ie drivers)
- */
-struct bio {
-       struct bio          *bi_next;    /* request queue link */
-       struct block_device *bi_bdev;	/* target device */
-       unsigned long       bi_flags;    /* status, command, etc */
-       unsigned long       bi_opf;       /* low bits: r/w, high: priority */
+  struct bio_vec {
+	 struct page     *bv_page;
+	 unsigned short  bv_len;
+	 unsigned short  bv_offset;
+  };
 
-       unsigned int	bi_vcnt;     /* how may bio_vec's */
-       struct bvec_iter	bi_iter;	/* current index into bio_vec array */
+  /*
+   * main unit of I/O for the block layer and lower layers (ie drivers)
+   */
+  struct bio {
+	 struct bio          *bi_next;    /* request queue link */
+	 struct block_device *bi_bdev;	/* target device */
+	 unsigned long       bi_flags;    /* status, command, etc */
+	 unsigned long       bi_opf;       /* low bits: r/w, high: priority */
 
-       unsigned int	bi_size;     /* total size in bytes */
-       unsigned short 	bi_phys_segments; /* segments after physaddr coalesce*/
-       unsigned short	bi_hw_segments; /* segments after DMA remapping */
-       unsigned int	bi_max;	     /* max bio_vecs we can hold
-                                        used as index into pool */
-       struct bio_vec   *bi_io_vec;  /* the actual vec list */
-       bio_end_io_t	*bi_end_io;  /* bi_end_io (bio) */
-       atomic_t		bi_cnt;	     /* pin count: free when it hits zero */
-       void             *bi_private;
-};
+	 unsigned int	bi_vcnt;     /* how may bio_vec's */
+	 struct bvec_iter	bi_iter;	/* current index into bio_vec array */
+
+	 unsigned int	bi_size;     /* total size in bytes */
+	 unsigned short 	bi_phys_segments; /* segments after physaddr coalesce*/
+	 unsigned short	bi_hw_segments; /* segments after DMA remapping */
+	 unsigned int	bi_max;	     /* max bio_vecs we can hold
+					  used as index into pool */
+	 struct bio_vec   *bi_io_vec;  /* the actual vec list */
+	 bio_end_io_t	*bi_end_io;  /* bi_end_io (bio) */
+	 atomic_t		bi_cnt;	     /* pin count: free when it hits zero */
+	 void             *bi_private;
+  };
 
 With this multipage bio design:
 
@@ -454,7 +479,7 @@ With this multipage bio design:
 - Splitting of an i/o request across multiple devices (as in the case of
   lvm or raid) is achieved by cloning the bio (where the clone points to
   the same bi_io_vec array, but with the index and size accordingly modified)
-- A linked list of bios is used as before for unrelated merges (*) - this
+- A linked list of bios is used as before for unrelated merges [*]_ - this
   avoids reallocs and makes independent completions easier to handle.
 - Code that traverses the req list can find all the segments of a bio
   by using rq_for_each_segment.  This handles the fact that a request
@@ -463,10 +488,12 @@ With this multipage bio design:
   field to keep track of the next bio_vec entry to process.
   (e.g a 1MB bio_vec needs to be handled in max 128kB chunks for IDE)
   [TBD: Should preferably also have a bi_voffset and bi_vlen to avoid modifying
-   bi_offset an len fields]
+  bi_offset an len fields]
 
-(*) unrelated merges -- a request ends up containing two or more bios that
-    didn't originate from the same place.
+.. [*]
+
+	unrelated merges -- a request ends up containing two or more bios that
+	didn't originate from the same place.
 
 bi_end_io() i/o callback gets called on i/o completion of the entire bio.
 
@@ -484,10 +511,11 @@ which in turn means that only raw I/O uses it (direct i/o may not work
 right now). The intent however is to enable clustering of pages etc to
 become possible. The pagebuf abstraction layer from SGI also uses multi-page
 bios, but that is currently not included in the stock development kernels.
-The same is true of Andrew Morton's work-in-progress multipage bio writeout 
+The same is true of Andrew Morton's work-in-progress multipage bio writeout
 and readahead patches.
 
 2.3 Changes in the Request Structure
+------------------------------------
 
 The request structure is the structure that gets passed down to low level
 drivers. The block layer make_request function builds up a request structure,
@@ -500,11 +528,11 @@ request structure.
 Only some relevant fields (mainly those which changed or may be referred
 to in some of the discussion here) are listed below, not necessarily in
 the order in which they occur in the structure (see include/linux/blkdev.h)
-Refer to Documentation/block/request.txt for details about all the request
+Refer to Documentation/block/request.rst for details about all the request
 structure fields and a quick reference about the layers which are
-supposed to use or modify those fields.
+supposed to use or modify those fields::
 
-struct request {
+  struct request {
 	struct list_head queuelist;  /* Not meant to be directly accessed by
 					the driver.
 					Used by q->elv_next_request_fn
@@ -549,11 +577,11 @@ struct request {
 	.
 	struct bio *bio, *biotail;  /* bio list instead of bh */
 	struct request_list *rl;
-}
-	
+  }
+
 See the req_ops and req_flag_bits definitions for an explanation of the various
 flags available. Some bits are used by the block layer or i/o scheduler.
-	
+
 The behaviour of the various sector counts are almost the same as before,
 except that since we have multi-segment bios, current_nr_sectors refers
 to the numbers of sectors in the current segment being processed which could
@@ -579,8 +607,10 @@ a driver needs to be careful about interoperation with the block layer helper
 functions which the driver uses. (Section 1.3)
 
 3. Using bios
+=============
 
 3.1 Setup/Teardown
+------------------
 
 There are routines for managing the allocation, and reference counting, and
 freeing of bios (bio_alloc, bio_get, bio_put).
@@ -607,10 +637,13 @@ case of bio, these routines make use of the standard slab allocator.
 The caller of bio_alloc is expected to taken certain steps to avoid
 deadlocks, e.g. avoid trying to allocate more memory from the pool while
 already holding memory obtained from the pool.
-[TBD: This is a potential issue, though a rare possibility
- in the bounce bio allocation that happens in the current code, since
- it ends up allocating a second bio from the same pool while
- holding the original bio ]
+
+::
+
+  [TBD: This is a potential issue, though a rare possibility
+   in the bounce bio allocation that happens in the current code, since
+   it ends up allocating a second bio from the same pool while
+   holding the original bio ]
 
 Memory allocated from the pool should be released back within a limited
 amount of time (in the case of bio, that would be after the i/o is completed).
@@ -636,14 +669,18 @@ same bio_vec_list). This would typically be used for splitting i/o requests
 in lvm or md.
 
 3.2 Generic bio helper Routines
+-------------------------------
 
 3.2.1 Traversing segments and completion units in a request
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 The macro rq_for_each_segment() should be used for traversing the bios
 in the request list (drivers should avoid directly trying to do it
 themselves). Using these helpers should also make it easier to cope
 with block changes in the future.
 
+::
+
 	struct req_iterator iter;
 	rq_for_each_segment(bio_vec, rq, iter)
 		/* bio_vec is now current segment */
@@ -654,6 +691,7 @@ which don't make a distinction between segments and completion units would
 need to be reorganized to support multi-segment bios.
 
 3.2.2 Setting up DMA scatterlists
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 The blk_rq_map_sg() helper routine would be used for setting up scatter
 gather lists from a request, so a driver need not do it on its own.
@@ -684,6 +722,7 @@ of physical data segments in a request (i.e. the largest sized scatter list
 a driver could handle)
 
 3.2.3 I/O completion
+^^^^^^^^^^^^^^^^^^^^
 
 The existing generic block layer helper routines end_request,
 end_that_request_first and end_that_request_last can be used for i/o
@@ -692,8 +731,10 @@ request can be kicked of) as before. With the introduction of multi-page
 bio support, end_that_request_first requires an additional argument indicating
 the number of sectors completed.
 
-3.2.4 Implications for drivers that do not interpret bios (don't handle
- multiple segments)
+3.2.4 Implications for drivers that do not interpret bios
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+(don't handle multiple segments)
 
 Drivers that do not interpret bios e.g those which do not handle multiple
 segments and do not support i/o into high memory addresses (require bounce
@@ -708,15 +749,18 @@ be used if only if the request has come down from block/bio path, not for
 direct access requests which only specify rq->buffer without a valid rq->bio)
 
 3.3 I/O Submission
+------------------
 
 The routine submit_bio() is used to submit a single io. Higher level i/o
 routines make use of this:
 
 (a) Buffered i/o:
+
 The routine submit_bh() invokes submit_bio() on a bio corresponding to the
 bh, allocating the bio if required. ll_rw_block() uses submit_bh() as before.
 
 (b) Kiobuf i/o (for raw/direct i/o):
+
 The ll_rw_kio() routine breaks up the kiobuf into page sized chunks and
 maps the array to one or more multi-page bios, issuing submit_bio() to
 perform the i/o on each of these.
@@ -739,6 +783,7 @@ Todo/Observation:
 
 
 (c) Page i/o:
+
 Todo/Under discussion:
 
  Andrew Morton's multi-page bio patches attempt to issue multi-page
@@ -754,6 +799,7 @@ Todo/Under discussion:
  abstraction, but intended to be as lightweight as possible).
 
 (d) Direct access i/o:
+
 Direct access requests that do not contain bios would be submitted differently
 as discussed earlier in section 1.3.
 
@@ -781,11 +827,13 @@ Aside:
 
 
 4. The I/O scheduler
+====================
+
 I/O scheduler, a.k.a. elevator, is implemented in two layers.  Generic dispatch
 queue and specific I/O schedulers.  Unless stated otherwise, elevator is used
 to refer to both parts and I/O scheduler to specific I/O schedulers.
 
-Block layer implements generic dispatch queue in block/*.c.
+Block layer implements generic dispatch queue in `block/*.c`.
 The generic dispatch queue is responsible for requeueing, handling non-fs
 requests and all other subtleties.
 
@@ -803,8 +851,11 @@ doesn't implement a function, the switch does nothing or some minimal house
 keeping work.
 
 4.1. I/O scheduler API
+----------------------
 
 The functions an elevator may implement are: (* are mandatory)
+
+=============================== ================================================
 elevator_merge_fn		called to query requests for merge with a bio
 
 elevator_merge_req_fn		called when two requests get merged. the one
@@ -863,8 +914,11 @@ elevator_deactivate_req_fn	Called when device driver decides to delay
 elevator_init_fn*
 elevator_exit_fn		Allocate and free any elevator specific storage
 				for a queue.
+=============================== ================================================
 
 4.2 Request flows seen by I/O schedulers
+----------------------------------------
+
 All requests seen by I/O schedulers strictly follow one of the following three
 flows.
 
@@ -878,9 +932,12 @@ flows.
  -> put_req_fn
 
 4.3 I/O scheduler implementation
+--------------------------------
+
 The generic i/o scheduler algorithm attempts to sort/merge/batch requests for
 optimal disk scan and request servicing performance (based on generic
 principles and device capabilities), optimized for:
+
 i.   improved throughput
 ii.  improved latency
 iii. better utilization of h/w & CPU time
@@ -934,15 +991,19 @@ Aside:
   a big request from the broken up pieces coming by.
 
 4.4 I/O contexts
+----------------
+
 I/O contexts provide a dynamically allocated per process data area. They may
 be used in I/O schedulers, and in the block layer (could be used for IO statis,
-priorities for example). See *io_context in block/ll_rw_blk.c, and as-iosched.c
+priorities for example). See `*io_context` in block/ll_rw_blk.c, and as-iosched.c
 for an example of usage in an i/o scheduler.
 
 
 5. Scalability related changes
+==============================
 
 5.1 Granular Locking: io_request_lock replaced by a per-queue lock
+------------------------------------------------------------------
 
 The global io_request_lock has been removed as of 2.5, to avoid
 the scalability bottleneck it was causing, and has been replaced by more
@@ -957,20 +1018,23 @@ request_fn execution which it means that lots of older drivers
 should still be SMP safe. Drivers are free to drop the queue
 lock themselves, if required. Drivers that explicitly used the
 io_request_lock for serialization need to be modified accordingly.
-Usually it's as easy as adding a global lock:
+Usually it's as easy as adding a global lock::
 
 	static DEFINE_SPINLOCK(my_driver_lock);
 
 and passing the address to that lock to blk_init_queue().
 
 5.2 64 bit sector numbers (sector_t prepares for 64 bit support)
+----------------------------------------------------------------
 
 The sector number used in the bio structure has been changed to sector_t,
 which could be defined as 64 bit in preparation for 64 bit sector support.
 
 6. Other Changes/Implications
+=============================
 
 6.1 Partition re-mapping handled by the generic block layer
+-----------------------------------------------------------
 
 In 2.5 some of the gendisk/partition related code has been reorganized.
 Now the generic block layer performs partition-remapping early and thus
@@ -985,6 +1049,7 @@ sent are offset from the beginning of the device.
 
 
 7. A Few Tips on Migration of older drivers
+===========================================
 
 Old-style drivers that just use CURRENT and ignores clustered requests,
 may not need much change.  The generic layer will automatically handle
@@ -1018,12 +1083,12 @@ blk_init_queue time.
 
 Drivers no longer have to map a {partition, sector offset} into the
 correct absolute location anymore, this is done by the block layer, so
-where a driver received a request ala this before:
+where a driver received a request ala this before::
 
 	rq->rq_dev = mk_kdev(3, 5);	/* /dev/hda5 */
 	rq->sector = 0;			/* first sector on hda5 */
 
-  it will now see
+it will now see::
 
 	rq->rq_dev = mk_kdev(3, 0);	/* /dev/hda */
 	rq->sector = 123128;		/* offset from start of disk */
@@ -1040,38 +1105,66 @@ a bio into the virtual address space.
 
 
 8. Prior/Related/Impacted patches
+=================================
 
 8.1. Earlier kiobuf patches (sct/axboe/chait/hch/mkp)
+-----------------------------------------------------
+
 - orig kiobuf & raw i/o patches (now in 2.4 tree)
 - direct kiobuf based i/o to devices (no intermediate bh's)
 - page i/o using kiobuf
 - kiobuf splitting for lvm (mkp)
 - elevator support for kiobuf request merging (axboe)
+
 8.2. Zero-copy networking (Dave Miller)
+---------------------------------------
+
 8.3. SGI XFS - pagebuf patches - use of kiobufs
+-----------------------------------------------
 8.4. Multi-page pioent patch for bio (Christoph Hellwig)
+--------------------------------------------------------
 8.5. Direct i/o implementation (Andrea Arcangeli) since 2.4.10-pre11
+--------------------------------------------------------------------
 8.6. Async i/o implementation patch (Ben LaHaise)
+-------------------------------------------------
 8.7. EVMS layering design (IBM EVMS team)
-8.8. Larger page cache size patch (Ben LaHaise) and
-     Large page size (Daniel Phillips)
+-----------------------------------------
+8.8. Larger page cache size patch (Ben LaHaise) and Large page size (Daniel Phillips)
+-------------------------------------------------------------------------------------
+
     => larger contiguous physical memory buffers
+
 8.9. VM reservations patch (Ben LaHaise)
+----------------------------------------
 8.10. Write clustering patches ? (Marcelo/Quintela/Riel ?)
+----------------------------------------------------------
 8.11. Block device in page cache patch (Andrea Archangeli) - now in 2.4.10+
-8.12. Multiple block-size transfers for faster raw i/o (Shailabh Nagar,
-      Badari)
+---------------------------------------------------------------------------
+8.12. Multiple block-size transfers for faster raw i/o (Shailabh Nagar, Badari)
+-------------------------------------------------------------------------------
 8.13  Priority based i/o scheduler - prepatches (Arjan van de Ven)
+------------------------------------------------------------------
 8.14  IDE Taskfile i/o patch (Andre Hedrick)
+--------------------------------------------
 8.15  Multi-page writeout and readahead patches (Andrew Morton)
+---------------------------------------------------------------
 8.16  Direct i/o patches for 2.5 using kvec and bio (Badari Pulavarthy)
+-----------------------------------------------------------------------
 
-9. Other References:
+9. Other References
+===================
+
+9.1 The Splice I/O Model
+------------------------
+
+Larry McVoy (and subsequent discussions on lkml, and Linus' comments - Jan 2001
+
+9.2 Discussions about kiobuf and bh design
+------------------------------------------
+
+On lkml between sct, linus, alan et al - Feb-March 2001 (many of the
+initial thoughts that led to bio were brought up in this discussion thread)
 
-9.1 The Splice I/O Model - Larry McVoy (and subsequent discussions on lkml,
-and Linus' comments - Jan 2001)
-9.2 Discussions about kiobuf and bh design on lkml between sct, linus, alan
-et al - Feb-March 2001 (many of the initial thoughts that led to bio were
-brought up in this discussion thread)
 9.3 Discussions on mempool on lkml - Dec 2001.
+----------------------------------------------
 
diff --git a/Documentation/block/biovecs.txt b/Documentation/block/biovecs.rst
similarity index 92%
rename from Documentation/block/biovecs.txt
rename to Documentation/block/biovecs.rst
index ce6eccaf5df7..86fa66c87172 100644
--- a/Documentation/block/biovecs.txt
+++ b/Documentation/block/biovecs.rst
@@ -1,6 +1,6 @@
-
-Immutable biovecs and biovec iterators:
-=======================================
+======================================
+Immutable biovecs and biovec iterators
+======================================
 
 Kent Overstreet <kmo@daterainc.com>
 
@@ -121,10 +121,12 @@ Other implications:
 Usage of helpers:
 =================
 
-* The following helpers whose names have the suffix of "_all" can only be used
-on non-BIO_CLONED bio. They are usually used by filesystem code. Drivers
-shouldn't use them because the bio may have been split before it reached the
-driver.
+* The following helpers whose names have the suffix of `_all` can only be used
+  on non-BIO_CLONED bio. They are usually used by filesystem code. Drivers
+  shouldn't use them because the bio may have been split before it reached the
+  driver.
+
+::
 
 	bio_for_each_segment_all()
 	bio_first_bvec_all()
@@ -132,13 +134,13 @@ driver.
 	bio_last_bvec_all()
 
 * The following helpers iterate over single-page segment. The passed 'struct
-bio_vec' will contain a single-page IO vector during the iteration
+  bio_vec' will contain a single-page IO vector during the iteration::
 
 	bio_for_each_segment()
 	bio_for_each_segment_all()
 
 * The following helpers iterate over multi-page bvec. The passed 'struct
-bio_vec' will contain a multi-page IO vector during the iteration
+  bio_vec' will contain a multi-page IO vector during the iteration::
 
 	bio_for_each_bvec()
 	rq_for_each_bvec()
diff --git a/Documentation/block/capability.rst b/Documentation/block/capability.rst
new file mode 100644
index 000000000000..2cf258d64bbe
--- /dev/null
+++ b/Documentation/block/capability.rst
@@ -0,0 +1,18 @@
+===============================
+Generic Block Device Capability
+===============================
+
+This file documents the sysfs file block/<disk>/capability
+
+capability is a hex word indicating which capabilities a specific disk
+supports.  For more information on bits not listed here, see
+include/linux/genhd.h
+
+GENHD_FL_MEDIA_CHANGE_NOTIFY
+----------------------------
+
+Value: 4
+
+When this bit is set, the disk supports Asynchronous Notification
+of media change events.  These events will be broadcast to user
+space via kernel uevent.
diff --git a/Documentation/block/capability.txt b/Documentation/block/capability.txt
deleted file mode 100644
index 2f1729424ef4..000000000000
--- a/Documentation/block/capability.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Generic Block Device Capability
-===============================================================================
-This file documents the sysfs file block/<disk>/capability
-
-capability is a hex word indicating which capabilities a specific disk
-supports.  For more information on bits not listed here, see
-include/linux/genhd.h
-
-Capability				Value
--------------------------------------------------------------------------------
-GENHD_FL_MEDIA_CHANGE_NOTIFY		4
-	When this bit is set, the disk supports Asynchronous Notification
-	of media change events.  These events will be broadcast to user
-	space via kernel uevent.
-
diff --git a/Documentation/block/cmdline-partition.txt b/Documentation/block/cmdline-partition.rst
similarity index 92%
rename from Documentation/block/cmdline-partition.txt
rename to Documentation/block/cmdline-partition.rst
index 760a3f7c3ed4..530bedff548a 100644
--- a/Documentation/block/cmdline-partition.txt
+++ b/Documentation/block/cmdline-partition.rst
@@ -1,5 +1,6 @@
+==============================================
 Embedded device command line partition parsing
-=====================================================================
+==============================================
 
 The "blkdevparts" command line option adds support for reading the
 block device partition table from the kernel command line.
@@ -22,12 +23,15 @@ blkdevparts=<blkdev-def>[;<blkdev-def>]
 <size>
     partition size, in bytes, such as: 512, 1m, 1G.
     size may contain an optional suffix of (upper or lower case):
+
       K, M, G, T, P, E.
+
     "-" is used to denote all remaining space.
 
 <offset>
     partition start address, in bytes.
     offset may contain an optional suffix of (upper or lower case):
+
       K, M, G, T, P, E.
 
 (part-name)
@@ -36,11 +40,14 @@ blkdevparts=<blkdev-def>[;<blkdev-def>]
     User space application can access partition by partition name.
 
 Example:
+
     eMMC disk names are "mmcblk0" and "mmcblk0boot0".
 
-  bootargs:
+  bootargs::
+
     'blkdevparts=mmcblk0:1G(data0),1G(data1),-;mmcblk0boot0:1m(boot),-(kernel)'
 
-  dmesg:
+  dmesg::
+
     mmcblk0: p1(data0) p2(data1) p3()
     mmcblk0boot0: p1(boot) p2(kernel)
diff --git a/Documentation/block/data-integrity.txt b/Documentation/block/data-integrity.rst
similarity index 92%
rename from Documentation/block/data-integrity.txt
rename to Documentation/block/data-integrity.rst
index 934c44ea0c57..4aa6da86ea34 100644
--- a/Documentation/block/data-integrity.txt
+++ b/Documentation/block/data-integrity.rst
@@ -1,5 +1,9 @@
-----------------------------------------------------------------------
-1. INTRODUCTION
+==============
+Data Integrity
+==============
+
+1. Introduction
+===============
 
 Modern filesystems feature checksumming of data and metadata to
 protect against data corruption.  However, the detection of the
@@ -28,8 +32,8 @@ integrity of the I/O and reject it if corruption is detected.  This
 allows not only corruption prevention but also isolation of the point
 of failure.
 
-----------------------------------------------------------------------
-2. THE DATA INTEGRITY EXTENSIONS
+2. The Data Integrity Extensions
+================================
 
 As written, the protocol extensions only protect the path between
 controller and storage device.  However, many controllers actually
@@ -75,8 +79,8 @@ Extensions.  As these extensions are outside the scope of the protocol
 bodies (T10, T13), Oracle and its partners are trying to standardize
 them within the Storage Networking Industry Association.
 
-----------------------------------------------------------------------
-3. KERNEL CHANGES
+3. Kernel Changes
+=================
 
 The data integrity framework in Linux enables protection information
 to be pinned to I/Os and sent to/received from controllers that
@@ -123,10 +127,11 @@ access to manipulate the tags from user space.  A passthrough
 interface for this is being worked on.
 
 
-----------------------------------------------------------------------
-4. BLOCK LAYER IMPLEMENTATION DETAILS
+4. Block Layer Implementation Details
+=====================================
 
-4.1 BIO
+4.1 Bio
+-------
 
 The data integrity patches add a new field to struct bio when
 CONFIG_BLK_DEV_INTEGRITY is enabled.  bio_integrity(bio) returns a
@@ -145,7 +150,8 @@ attached using bio_integrity_add_page().
 bio_free() will automatically free the bip.
 
 
-4.2 BLOCK DEVICE
+4.2 Block Device
+----------------
 
 Because the format of the protection data is tied to the physical
 disk, each block device has been extended with a block integrity
@@ -163,10 +169,11 @@ and MD linear, RAID0 and RAID1 are currently supported.  RAID4/5/6
 will require extra work due to the application tag.
 
 
-----------------------------------------------------------------------
-5.0 BLOCK LAYER INTEGRITY API
+5.0 Block Layer Integrity API
+=============================
 
-5.1 NORMAL FILESYSTEM
+5.1 Normal Filesystem
+---------------------
 
     The normal filesystem is unaware that the underlying block device
     is capable of sending/receiving integrity metadata.  The IMD will
@@ -174,25 +181,26 @@ will require extra work due to the application tag.
     in case of a WRITE.  A READ request will cause the I/O integrity
     to be verified upon completion.
 
-    IMD generation and verification can be toggled using the
+    IMD generation and verification can be toggled using the::
 
       /sys/block/<bdev>/integrity/write_generate
 
-    and
+    and::
 
       /sys/block/<bdev>/integrity/read_verify
 
     flags.
 
 
-5.2 INTEGRITY-AWARE FILESYSTEM
+5.2 Integrity-Aware Filesystem
+------------------------------
 
     A filesystem that is integrity-aware can prepare I/Os with IMD
     attached.  It can also use the application tag space if this is
     supported by the block device.
 
 
-    bool bio_integrity_prep(bio);
+    `bool bio_integrity_prep(bio);`
 
       To generate IMD for WRITE and to set up buffers for READ, the
       filesystem must call bio_integrity_prep(bio).
@@ -204,14 +212,15 @@ will require extra work due to the application tag.
       Complete bio with error if prepare failed for some reson.
 
 
-5.3 PASSING EXISTING INTEGRITY METADATA
+5.3 Passing Existing Integrity Metadata
+---------------------------------------
 
     Filesystems that either generate their own integrity metadata or
     are capable of transferring IMD from user space can use the
     following calls:
 
 
-    struct bip * bio_integrity_alloc(bio, gfp_mask, nr_pages);
+    `struct bip * bio_integrity_alloc(bio, gfp_mask, nr_pages);`
 
       Allocates the bio integrity payload and hangs it off of the bio.
       nr_pages indicate how many pages of protection data need to be
@@ -220,7 +229,7 @@ will require extra work due to the application tag.
       The integrity payload will be freed at bio_free() time.
 
 
-    int bio_integrity_add_page(bio, page, len, offset);
+    `int bio_integrity_add_page(bio, page, len, offset);`
 
       Attaches a page containing integrity metadata to an existing
       bio.  The bio must have an existing bip,
@@ -241,16 +250,16 @@ will require extra work due to the application tag.
       integrity upon completion.
 
 
-5.4 REGISTERING A BLOCK DEVICE AS CAPABLE OF EXCHANGING INTEGRITY
-    METADATA
+5.4 Registering A Block Device As Capable Of Exchanging Integrity Metadata
+--------------------------------------------------------------------------
 
     To enable integrity exchange on a block device the gendisk must be
     registered as capable:
 
-    int blk_integrity_register(gendisk, blk_integrity);
+    `int blk_integrity_register(gendisk, blk_integrity);`
 
       The blk_integrity struct is a template and should contain the
-      following:
+      following::
 
         static struct blk_integrity my_profile = {
             .name                   = "STANDARDSBODY-TYPE-VARIANT-CSUM",
@@ -278,4 +287,5 @@ will require extra work due to the application tag.
       0 depending on the value of the Control Mode Page ATO bit.
 
 ----------------------------------------------------------------------
+
 2007-12-24 Martin K. Petersen <martin.petersen@oracle.com>
diff --git a/Documentation/block/deadline-iosched.txt b/Documentation/block/deadline-iosched.rst
similarity index 89%
rename from Documentation/block/deadline-iosched.txt
rename to Documentation/block/deadline-iosched.rst
index 2d82c80322cb..7346cc901234 100644
--- a/Documentation/block/deadline-iosched.txt
+++ b/Documentation/block/deadline-iosched.rst
@@ -1,3 +1,4 @@
+==============================
 Deadline IO scheduler tunables
 ==============================
 
@@ -7,15 +8,13 @@ of interest to power users.
 
 Selecting IO schedulers
 -----------------------
-Refer to Documentation/block/switching-sched.txt for information on
+Refer to Documentation/block/switching-sched.rst for information on
 selecting an io scheduler on a per-device basis.
 
-
-********************************************************************************
-
+------------------------------------------------------------------------------
 
 read_expire	(in ms)
------------
+-----------------------
 
 The goal of the deadline io scheduler is to attempt to guarantee a start
 service time for a request. As we focus mainly on read latencies, this is
@@ -25,15 +24,15 @@ milliseconds.
 
 
 write_expire	(in ms)
------------
+-----------------------
 
 Similar to read_expire mentioned above, but for writes.
 
 
 fifo_batch	(number of requests)
-----------
+------------------------------------
 
-Requests are grouped into ``batches'' of a particular data direction (read or
+Requests are grouped into ``batches`` of a particular data direction (read or
 write) which are serviced in increasing sector order.  To limit extra seeking,
 deadline expiries are only checked between batches.  fifo_batch controls the
 maximum number of requests per batch.
@@ -45,7 +44,7 @@ generally improves throughput, at the cost of latency variation.
 
 
 writes_starved	(number of dispatches)
---------------
+--------------------------------------
 
 When we have to move requests from the io scheduler queue to the block
 device dispatch queue, we always give a preference to reads. However, we
@@ -56,7 +55,7 @@ same criteria as reads.
 
 
 front_merges	(bool)
-------------
+----------------------
 
 Sometimes it happens that a request enters the io scheduler that is contiguous
 with a request that is already on the queue. Either it fits in the back of that
diff --git a/Documentation/block/index.rst b/Documentation/block/index.rst
new file mode 100644
index 000000000000..8cd226a0e86e
--- /dev/null
+++ b/Documentation/block/index.rst
@@ -0,0 +1,25 @@
+:orphan:
+
+=====
+Block
+=====
+
+.. toctree::
+   :maxdepth: 1
+
+   bfq-iosched
+   biodoc
+   biovecs
+   capability
+   cmdline-partition
+   data-integrity
+   deadline-iosched
+   ioprio
+   kyber-iosched
+   null_blk
+   pr
+   queue-sysfs
+   request
+   stat
+   switching-sched
+   writeback_cache_control
diff --git a/Documentation/block/ioprio.txt b/Documentation/block/ioprio.rst
similarity index 75%
rename from Documentation/block/ioprio.txt
rename to Documentation/block/ioprio.rst
index 8ed8c59380b4..f72b0de65af7 100644
--- a/Documentation/block/ioprio.txt
+++ b/Documentation/block/ioprio.rst
@@ -1,3 +1,4 @@
+===================
 Block io priorities
 ===================
 
@@ -40,81 +41,81 @@ class data, since it doesn't really apply here.
 Tools
 -----
 
-See below for a sample ionice tool. Usage:
+See below for a sample ionice tool. Usage::
 
-# ionice -c<class> -n<level> -p<pid>
+	# ionice -c<class> -n<level> -p<pid>
 
 If pid isn't given, the current process is assumed. IO priority settings
 are inherited on fork, so you can use ionice to start the process at a given
-level:
+level::
 
-# ionice -c2 -n0 /bin/ls
+	# ionice -c2 -n0 /bin/ls
 
 will run ls at the best-effort scheduling class at the highest priority.
-For a running process, you can give the pid instead:
+For a running process, you can give the pid instead::
 
-# ionice -c1 -n2 -p100
+	# ionice -c1 -n2 -p100
 
 will change pid 100 to run at the realtime scheduling class, at priority 2.
 
----> snip ionice.c tool <---
+ionice.c tool::
 
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <getopt.h>
-#include <unistd.h>
-#include <sys/ptrace.h>
-#include <asm/unistd.h>
+  #include <stdio.h>
+  #include <stdlib.h>
+  #include <errno.h>
+  #include <getopt.h>
+  #include <unistd.h>
+  #include <sys/ptrace.h>
+  #include <asm/unistd.h>
 
-extern int sys_ioprio_set(int, int, int);
-extern int sys_ioprio_get(int, int);
+  extern int sys_ioprio_set(int, int, int);
+  extern int sys_ioprio_get(int, int);
 
-#if defined(__i386__)
-#define __NR_ioprio_set		289
-#define __NR_ioprio_get		290
-#elif defined(__ppc__)
-#define __NR_ioprio_set		273
-#define __NR_ioprio_get		274
-#elif defined(__x86_64__)
-#define __NR_ioprio_set		251
-#define __NR_ioprio_get		252
-#elif defined(__ia64__)
-#define __NR_ioprio_set		1274
-#define __NR_ioprio_get		1275
-#else
-#error "Unsupported arch"
-#endif
+  #if defined(__i386__)
+  #define __NR_ioprio_set		289
+  #define __NR_ioprio_get		290
+  #elif defined(__ppc__)
+  #define __NR_ioprio_set		273
+  #define __NR_ioprio_get		274
+  #elif defined(__x86_64__)
+  #define __NR_ioprio_set		251
+  #define __NR_ioprio_get		252
+  #elif defined(__ia64__)
+  #define __NR_ioprio_set		1274
+  #define __NR_ioprio_get		1275
+  #else
+  #error "Unsupported arch"
+  #endif
 
-static inline int ioprio_set(int which, int who, int ioprio)
-{
+  static inline int ioprio_set(int which, int who, int ioprio)
+  {
 	return syscall(__NR_ioprio_set, which, who, ioprio);
-}
+  }
 
-static inline int ioprio_get(int which, int who)
-{
+  static inline int ioprio_get(int which, int who)
+  {
 	return syscall(__NR_ioprio_get, which, who);
-}
+  }
 
-enum {
+  enum {
 	IOPRIO_CLASS_NONE,
 	IOPRIO_CLASS_RT,
 	IOPRIO_CLASS_BE,
 	IOPRIO_CLASS_IDLE,
-};
+  };
 
-enum {
+  enum {
 	IOPRIO_WHO_PROCESS = 1,
 	IOPRIO_WHO_PGRP,
 	IOPRIO_WHO_USER,
-};
+  };
 
-#define IOPRIO_CLASS_SHIFT	13
+  #define IOPRIO_CLASS_SHIFT	13
 
-const char *to_prio[] = { "none", "realtime", "best-effort", "idle", };
+  const char *to_prio[] = { "none", "realtime", "best-effort", "idle", };
 
-int main(int argc, char *argv[])
-{
+  int main(int argc, char *argv[])
+  {
 	int ioprio = 4, set = 0, ioprio_class = IOPRIO_CLASS_BE;
 	int c, pid = 0;
 
@@ -175,9 +176,7 @@ int main(int argc, char *argv[])
 	}
 
 	return 0;
-}
-
----> snip ionice.c tool <---
+  }
 
 
 March 11 2005, Jens Axboe <jens.axboe@oracle.com>
diff --git a/Documentation/block/kyber-iosched.txt b/Documentation/block/kyber-iosched.rst
similarity index 86%
rename from Documentation/block/kyber-iosched.txt
rename to Documentation/block/kyber-iosched.rst
index e94feacd7edc..3e164dd0617c 100644
--- a/Documentation/block/kyber-iosched.txt
+++ b/Documentation/block/kyber-iosched.rst
@@ -1,5 +1,6 @@
+============================
 Kyber I/O scheduler tunables
-===========================
+============================
 
 The only two tunables for the Kyber scheduler are the target latencies for
 reads and synchronous writes. Kyber will throttle requests in order to meet
diff --git a/Documentation/block/null_blk.txt b/Documentation/block/null_blk.rst
similarity index 60%
rename from Documentation/block/null_blk.txt
rename to Documentation/block/null_blk.rst
index 41f0a3d33bbd..31451d80783c 100644
--- a/Documentation/block/null_blk.txt
+++ b/Documentation/block/null_blk.rst
@@ -1,33 +1,43 @@
+========================
 Null block device driver
-================================================================================
+========================
 
-I. Overview
+1. Overview
+===========
 
 The null block device (/dev/nullb*) is used for benchmarking the various
 block-layer implementations. It emulates a block device of X gigabytes in size.
 The following instances are possible:
 
   Single-queue block-layer
+
     - Request-based.
     - Single submission queue per device.
     - Implements IO scheduling algorithms (CFQ, Deadline, noop).
+
   Multi-queue block-layer
+
     - Request-based.
     - Configurable submission queues per device.
+
   No block-layer (Known as bio-based)
+
     - Bio-based. IO requests are submitted directly to the device driver.
     - Directly accepts bio data structure and returns them.
 
 All of them have a completion queue for each core in the system.
 
-II. Module parameters applicable for all instances:
+2. Module parameters applicable for all instances
+=================================================
 
 queue_mode=[0-2]: Default: 2-Multi-queue
   Selects which block-layer the module should instantiate with.
 
-  0: Bio-based.
-  1: Single-queue.
-  2: Multi-queue.
+  =  ============
+  0  Bio-based
+  1  Single-queue
+  2  Multi-queue
+  =  ============
 
 home_node=[0--nr_nodes]: Default: NUMA_NO_NODE
   Selects what CPU node the data structures are allocated from.
@@ -45,12 +55,14 @@ nr_devices=[Number of devices]: Default: 1
 irqmode=[0-2]: Default: 1-Soft-irq
   The completion mode used for completing IOs to the block-layer.
 
-  0: None.
-  1: Soft-irq. Uses IPI to complete IOs across CPU nodes. Simulates the overhead
+  =  ===========================================================================
+  0  None.
+  1  Soft-irq. Uses IPI to complete IOs across CPU nodes. Simulates the overhead
      when IOs are issued from another CPU node than the home the device is
      connected to.
-  2: Timer: Waits a specific period (completion_nsec) for each IO before
+  2  Timer: Waits a specific period (completion_nsec) for each IO before
      completion.
+  =  ===========================================================================
 
 completion_nsec=[ns]: Default: 10,000ns
   Combined with irqmode=2 (timer). The time each completion event must wait.
@@ -66,30 +78,45 @@ hw_queue_depth=[0..qdepth]: Default: 64
 III: Multi-queue specific parameters
 
 use_per_node_hctx=[0/1]: Default: 0
-  0: The number of submit queues are set to the value of the submit_queues
+
+  =  =====================================================================
+  0  The number of submit queues are set to the value of the submit_queues
      parameter.
-  1: The multi-queue block layer is instantiated with a hardware dispatch
+  1  The multi-queue block layer is instantiated with a hardware dispatch
      queue for each CPU node in the system.
+  =  =====================================================================
 
 no_sched=[0/1]: Default: 0
-  0: nullb* use default blk-mq io scheduler.
-  1: nullb* doesn't use io scheduler.
+
+  =  ======================================
+  0  nullb* use default blk-mq io scheduler
+  1  nullb* doesn't use io scheduler
+  =  ======================================
 
 blocking=[0/1]: Default: 0
-  0: Register as a non-blocking blk-mq driver device.
-  1: Register as a blocking blk-mq driver device, null_blk will set
+
+  =  ===============================================================
+  0  Register as a non-blocking blk-mq driver device.
+  1  Register as a blocking blk-mq driver device, null_blk will set
      the BLK_MQ_F_BLOCKING flag, indicating that it sometimes/always
      needs to block in its ->queue_rq() function.
+  =  ===============================================================
 
 shared_tags=[0/1]: Default: 0
-  0: Tag set is not shared.
-  1: Tag set shared between devices for blk-mq. Only makes sense with
+
+  =  ================================================================
+  0  Tag set is not shared.
+  1  Tag set shared between devices for blk-mq. Only makes sense with
      nr_devices > 1, otherwise there's no tag set to share.
+  =  ================================================================
 
 zoned=[0/1]: Default: 0
-  0: Block device is exposed as a random-access block device.
-  1: Block device is exposed as a host-managed zoned block device. Requires
+
+  =  ======================================================================
+  0  Block device is exposed as a random-access block device.
+  1  Block device is exposed as a host-managed zoned block device. Requires
      CONFIG_BLK_DEV_ZONED.
+  =  ======================================================================
 
 zone_size=[MB]: Default: 256
   Per zone size when exposed as a zoned block device. Must be a power of two.
diff --git a/Documentation/block/pr.txt b/Documentation/block/pr.rst
similarity index 95%
rename from Documentation/block/pr.txt
rename to Documentation/block/pr.rst
index ac9b8e70e64b..75b39052e7da 100644
--- a/Documentation/block/pr.txt
+++ b/Documentation/block/pr.rst
@@ -1,4 +1,4 @@
-
+===============================================
 Block layer support for Persistent Reservations
 ===============================================
 
@@ -23,22 +23,18 @@ The following types of reservations are supported:
 --------------------------------------------------
 
  - PR_WRITE_EXCLUSIVE
-
 	Only the initiator that owns the reservation can write to the
 	device.  Any initiator can read from the device.
 
  - PR_EXCLUSIVE_ACCESS
-
 	Only the initiator that owns the reservation can access the
 	device.
 
  - PR_WRITE_EXCLUSIVE_REG_ONLY
-
 	Only initiators with a registered key can write to the device,
 	Any initiator can read from the device.
 
  - PR_EXCLUSIVE_ACCESS_REG_ONLY
-
 	Only initiators with a registered key can access the device.
 
  - PR_WRITE_EXCLUSIVE_ALL_REGS
@@ -51,7 +47,6 @@ The following types of reservations are supported:
 	holder if you want to use this type. 
 
  - PR_EXCLUSIVE_ACCESS_ALL_REGS
-
 	Only initiators with a registered key can access the device.
 	All initiators with a registered key are considered reservation
 	holders.
@@ -63,6 +58,7 @@ The following ioctl are supported:
 ----------------------------------
 
 1. IOC_PR_REGISTER
+^^^^^^^^^^^^^^^^^^
 
 This ioctl command registers a new reservation if the new_key argument
 is non-null.  If no existing reservation exists old_key must be zero,
@@ -74,6 +70,7 @@ in old_key.
 
 
 2. IOC_PR_RESERVE
+^^^^^^^^^^^^^^^^^
 
 This ioctl command reserves the device and thus restricts access for other
 devices based on the type argument.  The key argument must be the existing
@@ -82,12 +79,14 @@ IOC_PR_REGISTER_IGNORE, IOC_PR_PREEMPT or IOC_PR_PREEMPT_ABORT commands.
 
 
 3. IOC_PR_RELEASE
+^^^^^^^^^^^^^^^^^
 
 This ioctl command releases the reservation specified by key and flags
 and thus removes any access restriction implied by it.
 
 
 4. IOC_PR_PREEMPT
+^^^^^^^^^^^^^^^^^
 
 This ioctl command releases the existing reservation referred to by
 old_key and replaces it with a new reservation of type for the
@@ -95,11 +94,13 @@ reservation key new_key.
 
 
 5. IOC_PR_PREEMPT_ABORT
+^^^^^^^^^^^^^^^^^^^^^^^
 
 This ioctl command works like IOC_PR_PREEMPT except that it also aborts
 any outstanding command sent over a connection identified by old_key.
 
 6. IOC_PR_CLEAR
+^^^^^^^^^^^^^^^
 
 This ioctl command unregisters both key and any other reservation key
 registered with the device and drops any existing reservation.
@@ -111,7 +112,6 @@ Flags
 All the ioctls have a flag field.  Currently only one flag is supported:
 
  - PR_FL_IGNORE_KEY
-
 	Ignore the existing reservation key.  This is commonly supported for
 	IOC_PR_REGISTER, and some implementation may support the flag for
 	IOC_PR_RESERVE.
diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.rst
similarity index 99%
rename from Documentation/block/queue-sysfs.txt
rename to Documentation/block/queue-sysfs.rst
index 83b457e24bba..9022249208b5 100644
--- a/Documentation/block/queue-sysfs.txt
+++ b/Documentation/block/queue-sysfs.rst
@@ -1,3 +1,4 @@
+=================
 Queue sysfs files
 =================
 
@@ -10,7 +11,7 @@ Files denoted with a RO postfix are readonly and the RW postfix means
 read-write.
 
 add_random (RW)
-----------------
+---------------
 This file allows to turn off the disk entropy contribution. Default
 value of this file is '1'(on).
 
@@ -21,13 +22,13 @@ used by CPU-addressable storage to bypass the pagecache.  It shows '1'
 if true, '0' if not.
 
 discard_granularity (RO)
------------------------
+------------------------
 This shows the size of internal allocation of the device in bytes, if
 reported by the device. A value of '0' means device does not support
 the discard functionality.
 
 discard_max_hw_bytes (RO)
-----------------------
+-------------------------
 Devices that support discard functionality may have internal limits on
 the number of bytes that can be trimmed or unmapped in a single operation.
 The discard_max_bytes parameter is set by the device driver to the maximum
diff --git a/Documentation/block/request.txt b/Documentation/block/request.rst
similarity index 59%
rename from Documentation/block/request.txt
rename to Documentation/block/request.rst
index 754e104ed369..747021e1ffdb 100644
--- a/Documentation/block/request.txt
+++ b/Documentation/block/request.rst
@@ -1,26 +1,37 @@
-
+============================
 struct request documentation
+============================
 
 Jens Axboe <jens.axboe@oracle.com> 27/05/02
 
-1.0
-Index
 
-2.0 Struct request members classification
+.. FIXME:
+   No idea about what does mean - seems just some noise, so comment it
 
-	2.1 struct request members explanation
+   1.0
+   Index
+
+   2.0 Struct request members classification
+
+       2.1 struct request members explanation
+
+   3.0
+
+
+   2.0
 
-3.0
 
 
-2.0
 Short explanation of request members
+====================================
 
 Classification flags:
 
+	=	====================
 	D	driver member
 	B	block layer member
 	I	I/O scheduler member
+	=	====================
 
 Unless an entry contains a D classification, a device driver must not access
 this member. Some members may contain D classifications, but should only be
@@ -28,14 +39,13 @@ access through certain macros or functions (eg ->flags).
 
 <linux/blkdev.h>
 
-2.1
+=============================== ======= =======================================
 Member				Flag	Comment
-------				----	-------
-
+=============================== ======= =======================================
 struct list_head queuelist	BI	Organization on various internal
 					queues
 
-void *elevator_private		I	I/O scheduler private data
+``void *elevator_private``	I	I/O scheduler private data
 
 unsigned char cmd[16]		D	Driver can use this for setting up
 					a cdb before execution, see
@@ -71,18 +81,19 @@ unsigned int hard_cur_sectors	B	Used to keep current_nr_sectors sane
 
 int tag				DB	TCQ tag, if assigned
 
-void *special			D	Free to be used by driver
+``void *special``		D	Free to be used by driver
 
-char *buffer			D	Map of first segment, also see
+``char *buffer``		D	Map of first segment, also see
 					section on bouncing SECTION
 
-struct completion *waiting	D	Can be used by driver to get signalled
+``struct completion *waiting``	D	Can be used by driver to get signalled
 					on request completion
 
-struct bio *bio			DBI	First bio in request
+``struct bio *bio``		DBI	First bio in request
 
-struct bio *biotail		DBI	Last bio in request
+``struct bio *biotail``		DBI	Last bio in request
 
-struct request_queue *q		DB	Request queue this request belongs to
+``struct request_queue *q``	DB	Request queue this request belongs to
 
-struct request_list *rl		B	Request list this request came from
+``struct request_list *rl``	B	Request list this request came from
+=============================== ======= =======================================
diff --git a/Documentation/block/stat.txt b/Documentation/block/stat.rst
similarity index 89%
rename from Documentation/block/stat.txt
rename to Documentation/block/stat.rst
index 0aace9cc536c..9c07bc22b0bc 100644
--- a/Documentation/block/stat.txt
+++ b/Documentation/block/stat.rst
@@ -1,3 +1,4 @@
+===============================================
 Block layer statistics in /sys/block/<dev>/stat
 ===============================================
 
@@ -6,9 +7,12 @@ This file documents the contents of the /sys/block/<dev>/stat file.
 The stat file provides several statistics about the state of block
 device <dev>.
 
-Q. Why are there multiple statistics in a single file?  Doesn't sysfs
+Q.
+   Why are there multiple statistics in a single file?  Doesn't sysfs
    normally contain a single value per file?
-A. By having a single file, the kernel can guarantee that the statistics
+
+A.
+   By having a single file, the kernel can guarantee that the statistics
    represent a consistent snapshot of the state of the device.  If the
    statistics were exported as multiple files containing one statistic
    each, it would be impossible to guarantee that a set of readings
@@ -18,8 +22,10 @@ The stat file consists of a single line of text containing 11 decimal
 values separated by whitespace.  The fields are summarized in the
 following table, and described in more detail below.
 
+
+=============== ============= =================================================
 Name            units         description
-----            -----         -----------
+=============== ============= =================================================
 read I/Os       requests      number of read I/Os processed
 read merges     requests      number of read I/Os merged with in-queue I/O
 read sectors    sectors       number of sectors read
@@ -35,6 +41,7 @@ discard I/Os    requests      number of discard I/Os processed
 discard merges  requests      number of discard I/Os merged with in-queue I/O
 discard sectors sectors       number of sectors discarded
 discard ticks   milliseconds  total wait time for discard requests
+=============== ============= =================================================
 
 read I/Os, write I/Os, discard I/0s
 ===================================
diff --git a/Documentation/block/switching-sched.txt b/Documentation/block/switching-sched.rst
similarity index 71%
rename from Documentation/block/switching-sched.txt
rename to Documentation/block/switching-sched.rst
index 3b2612e342f1..bd535febb7bd 100644
--- a/Documentation/block/switching-sched.txt
+++ b/Documentation/block/switching-sched.rst
@@ -1,17 +1,21 @@
+===================
+Switching Scheduler
+===================
+
 To choose IO schedulers at boot time, use the argument 'elevator=deadline'.
 'noop' and 'cfq' (the default) are also available. IO schedulers are assigned
 globally at boot time only presently.
 
 Each io queue has a set of io scheduler tunables associated with it. These
 tunables control how the io scheduler works. You can find these entries
-in:
+in::
 
-/sys/block/<device>/queue/iosched
+	/sys/block/<device>/queue/iosched
 
 assuming that you have sysfs mounted on /sys. If you don't have sysfs mounted,
-you can do so by typing:
+you can do so by typing::
 
-# mount none /sys -t sysfs
+	# mount none /sys -t sysfs
 
 As of the Linux 2.6.10 kernel, it is now possible to change the
 IO scheduler for a given block device on the fly (thus making it possible,
@@ -19,19 +23,19 @@ for instance, to set the CFQ scheduler for the system default, but
 set a specific device to use the deadline or noop schedulers - which
 can improve that device's throughput).
 
-To set a specific scheduler, simply do this:
+To set a specific scheduler, simply do this::
 
-echo SCHEDNAME > /sys/block/DEV/queue/scheduler
+	echo SCHEDNAME > /sys/block/DEV/queue/scheduler
 
 where SCHEDNAME is the name of a defined IO scheduler, and DEV is the
 device name (hda, hdb, sga, or whatever you happen to have).
 
 The list of defined schedulers can be found by simply doing
 a "cat /sys/block/DEV/queue/scheduler" - the list of valid names
-will be displayed, with the currently selected scheduler in brackets:
+will be displayed, with the currently selected scheduler in brackets::
 
-# cat /sys/block/hda/queue/scheduler
-noop deadline [cfq]
-# echo deadline > /sys/block/hda/queue/scheduler
-# cat /sys/block/hda/queue/scheduler
-noop [deadline] cfq
+  # cat /sys/block/hda/queue/scheduler
+  noop deadline [cfq]
+  # echo deadline > /sys/block/hda/queue/scheduler
+  # cat /sys/block/hda/queue/scheduler
+  noop [deadline] cfq
diff --git a/Documentation/block/writeback_cache_control.txt b/Documentation/block/writeback_cache_control.rst
similarity index 94%
rename from Documentation/block/writeback_cache_control.txt
rename to Documentation/block/writeback_cache_control.rst
index 8a6bdada5f6b..2c752c57c14c 100644
--- a/Documentation/block/writeback_cache_control.txt
+++ b/Documentation/block/writeback_cache_control.rst
@@ -1,6 +1,6 @@
-
+==========================================
 Explicit volatile write back cache control
-=====================================
+==========================================
 
 Introduction
 ------------
@@ -31,7 +31,7 @@ the blkdev_issue_flush() helper for a pure cache flush.
 
 
 Forced Unit Access
------------------
+------------------
 
 The REQ_FUA flag can be OR ed into the r/w flags of a bio submitted from the
 filesystem and will make sure that I/O completion for this request is only
@@ -62,14 +62,14 @@ flags themselves without any help from the block layer.
 
 
 Implementation details for request_fn based block drivers
---------------------------------------------------------------
+---------------------------------------------------------
 
 For devices that do not support volatile write caches there is no driver
 support required, the block layer completes empty REQ_PREFLUSH requests before
 entering the driver and strips off the REQ_PREFLUSH and REQ_FUA bits from
 requests that have a payload.  For devices with volatile write caches the
 driver needs to tell the block layer that it supports flushing caches by
-doing:
+doing::
 
 	blk_queue_write_cache(sdkp->disk->queue, true, false);
 
@@ -77,7 +77,7 @@ and handle empty REQ_OP_FLUSH requests in its prep_fn/request_fn.  Note that
 REQ_PREFLUSH requests with a payload are automatically turned into a sequence
 of an empty REQ_OP_FLUSH request followed by the actual write by the block
 layer.  For devices that also support the FUA bit the block layer needs
-to be told to pass through the REQ_FUA bit using:
+to be told to pass through the REQ_FUA bit using::
 
 	blk_queue_write_cache(sdkp->disk->queue, true, true);
 
diff --git a/Documentation/blockdev/zram.rst b/Documentation/blockdev/zram.rst
index 2111231c9c0f..6eccf13219ff 100644
--- a/Documentation/blockdev/zram.rst
+++ b/Documentation/blockdev/zram.rst
@@ -215,7 +215,7 @@ User space is advised to use the following files to read the device statistics.
 
 File /sys/block/zram<id>/stat
 
-Represents block layer statistics. Read Documentation/block/stat.txt for
+Represents block layer statistics. Read Documentation/block/stat.rst for
 details.
 
 File /sys/block/zram<id>/io_stat
diff --git a/MAINTAINERS b/MAINTAINERS
index 68d0070d18b6..c2a62012dd55 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2868,7 +2868,7 @@ M:	Jens Axboe <axboe@kernel.dk>
 L:	linux-block@vger.kernel.org
 S:	Maintained
 F:	block/bfq-*
-F:	Documentation/block/bfq-iosched.txt
+F:	Documentation/block/bfq-iosched.rst
 
 BFS FILE SYSTEM
 M:	"Tigran A. Aivazian" <aivazian.tigran@gmail.com>
diff --git a/block/Kconfig b/block/Kconfig
index 78374cb03114..2711d959ad2e 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -109,7 +109,7 @@ config BLK_CMDLINE_PARSER
 	which don't otherwise have any standardized method for listing the
 	partitions on a block device.
 
-	See Documentation/block/cmdline-partition.txt for more information.
+	See Documentation/block/cmdline-partition.rst for more information.
 
 config BLK_WBT
 	bool "Enable support for block device writeback throttling"
diff --git a/block/Kconfig.iosched b/block/Kconfig.iosched
index 4626b88b2d5a..eabd4328b228 100644
--- a/block/Kconfig.iosched
+++ b/block/Kconfig.iosched
@@ -26,7 +26,7 @@ config IOSCHED_BFQ
 	regardless of the device parameters and with any workload. It
 	also guarantees a low latency to interactive and soft
 	real-time applications.  Details in
-	Documentation/block/bfq-iosched.txt
+	Documentation/block/bfq-iosched.rst
 
 config BFQ_GROUP_IOSCHED
        bool "BFQ hierarchical scheduling support"
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 3d64e0406675..d915fbfa5340 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -26,7 +26,7 @@
  * low-latency capabilities. BFQ also supports full hierarchical
  * scheduling through cgroups. Next paragraphs provide an introduction
  * on BFQ inner workings. Details on BFQ benefits, usage and
- * limitations can be found in Documentation/block/bfq-iosched.txt.
+ * limitations can be found in Documentation/block/bfq-iosched.rst.
  *
  * BFQ is a proportional-share storage-I/O scheduling algorithm based
  * on the slice-by-slice service scheme of CFQ. But BFQ assigns
diff --git a/block/blk-integrity.c b/block/blk-integrity.c
index d1ab089e0919..a6ee6b6db157 100644
--- a/block/blk-integrity.c
+++ b/block/blk-integrity.c
@@ -396,7 +396,7 @@ static const struct blk_integrity_profile nop_profile = {
  * send/receive integrity metadata it must use this function to register
  * the capability with the block layer. The template is a blk_integrity
  * struct with values appropriate for the underlying hardware. See
- * Documentation/block/data-integrity.txt.
+ * Documentation/block/data-integrity.rst.
  */
 void blk_integrity_register(struct gendisk *disk, struct blk_integrity *template)
 {
diff --git a/block/ioprio.c b/block/ioprio.c
index f9821080c92c..35fed65d9bfd 100644
--- a/block/ioprio.c
+++ b/block/ioprio.c
@@ -16,7 +16,7 @@
  *
  * ioprio_set(PRIO_PROCESS, pid, prio);
  *
- * See also Documentation/block/ioprio.txt
+ * See also Documentation/block/ioprio.rst
  *
  */
 #include <linux/gfp.h>
diff --git a/block/mq-deadline.c b/block/mq-deadline.c
index 14288f864e94..db69a02a6b3c 100644
--- a/block/mq-deadline.c
+++ b/block/mq-deadline.c
@@ -24,7 +24,7 @@
 #include "blk-mq-sched.h"
 
 /*
- * See Documentation/block/deadline-iosched.txt
+ * See Documentation/block/deadline-iosched.rst
  */
 static const int read_expire = HZ / 2;  /* max time before a read is submitted. */
 static const int write_expire = 5 * HZ; /* ditto for writes, these limits are SOFT! */
diff --git a/block/partitions/cmdline.c b/block/partitions/cmdline.c
index 60fb3df9897c..f1edd5452249 100644
--- a/block/partitions/cmdline.c
+++ b/block/partitions/cmdline.c
@@ -11,7 +11,7 @@
  *
  * The format for the command line is just like mtdparts.
  *
- * For further information, see "Documentation/block/cmdline-partition.txt"
+ * For further information, see "Documentation/block/cmdline-partition.rst"
  *
  */
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 25/79] docs: convert docs to ReST and rename to *.rst
  2019-04-22 13:27   ` [PATCH v2 25/79] docs: " Mauro Carvalho Chehab
@ 2019-04-22 13:48     ` Bjorn Helgaas
  2019-04-22 14:07       ` Mauro Carvalho Chehab
  2019-04-25 18:07     ` Mark Brown
  1 sibling, 1 reply; 124+ messages in thread
From: Bjorn Helgaas @ 2019-04-22 13:48 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Linux Kernel Mailing List,
	Jonathan Corbet, Linux PCI, linux-wireless, Changbin Du

[+cc Changbin, -cc many others]

On Mon, Apr 22, 2019 at 8:28 AM Mauro Carvalho Chehab
<mchehab+samsung@kernel.org> wrote:
>
> Convert the PM documents to ReST, in order to allow them to
> build with Sphinx.
>
> The conversion is actually:
>   - add blank lines and identation in order to identify paragraphs;

s/identation/indentation/

>   - fix tables markups;
>   - add some lists markups;
>   - mark literal blocks;
>   - adjust title markups.
>
> At its new index.rst, let's add a :orphan: while this is not linked to
> the main index.rst file, in order to avoid build warnings.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

The PCI part of this is fine with me but may conflict with Changbin's work:

https://lore.kernel.org/lkml/20190409155626.6049-1-changbin.du@gmail.com

Since this doesn't look like it's targeting merge via the PCI tree,
I'll let you two work out any conflicts.

Acked-by: Bjorn Helgaas <bhelgaas@google.com>

Bjorn

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 64/79] docs: ioctl-number.txt: convert it to ReST format
  2019-04-22 13:27   ` [PATCH v2 64/79] docs: ioctl-number.txt: convert it to ReST format Mauro Carvalho Chehab
@ 2019-04-22 14:05     ` Doug Ledford
  2019-04-22 14:17       ` Mauro Carvalho Chehab
  0 siblings, 1 reply; 124+ messages in thread
From: Doug Ledford @ 2019-04-22 14:05 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, linux-kernel, Jonathan Corbet,
	Federico Vaga, Harry Wei, Alex Shi, Jason Gunthorpe, linux-rdma

[-- Attachment #1: Type: text/plain, Size: 683 bytes --]

On Mon, 2019-04-22 at 10:27 -0300, Mauro Carvalho Chehab wrote:
> +0x1b  all                                                            InfiniBand Subsystem
> +                                                                     <http://infiniband.sourceforge.net/>

I did not know this link was in there.  That sourceforge site is 15
years old and totally obsolete/irrelevant at this point.  This patch
doesn't have the purpose of fixing this up, but now that it's pointed
out, we'll make a follow up patch to correct this.

-- 
Doug Ledford <dledford@redhat.com>
    GPG KeyID: B826A3330E572FDD
    Key fingerprint = AE6B 1BDA 122B 23B4 265B  1274 B826 A333 0E57 2FDD

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 25/79] docs: convert docs to ReST and rename to *.rst
  2019-04-22 13:48     ` Bjorn Helgaas
@ 2019-04-22 14:07       ` Mauro Carvalho Chehab
  0 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 14:07 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: Linux Doc Mailing List, Linux Kernel Mailing List,
	Jonathan Corbet, Linux PCI, linux-wireless, Changbin Du

Em Mon, 22 Apr 2019 08:48:10 -0500
Bjorn Helgaas <bhelgaas@google.com> escreveu:

> [+cc Changbin, -cc many others]
> 
> On Mon, Apr 22, 2019 at 8:28 AM Mauro Carvalho Chehab
> <mchehab+samsung@kernel.org> wrote:
> >
> > Convert the PM documents to ReST, in order to allow them to
> > build with Sphinx.
> >
> > The conversion is actually:
> >   - add blank lines and identation in order to identify paragraphs;  
> 
> s/identation/indentation/
> 
> >   - fix tables markups;
> >   - add some lists markups;
> >   - mark literal blocks;
> >   - adjust title markups.
> >
> > At its new index.rst, let's add a :orphan: while this is not linked to
> > the main index.rst file, in order to avoid build warnings.
> >
> > Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>  
> 
> The PCI part of this is fine with me but may conflict with Changbin's work:
> 
> https://lore.kernel.org/lkml/20190409155626.6049-1-changbin.du@gmail.com

Yes it could generate a conflict, but it is a trivial change:

--- a/Documentation/PCI/pci.txt
+++ b/Documentation/PCI/pci.txt
@@ -110,7 +110,7 @@ initialization with a pointer to a structure describing the driver
 	resume_early	Wake device from low power state.
 	resume		Wake device from low power state.
 
-		(Please see Documentation/power/pci.txt for descriptions
+		(Please see Documentation/power/pci.rst for descriptions
 		of PCI Power Management and the related functions.)
 
 	shutdown	Hook into reboot_notifier_list (kernel/sys.c).

Looking at Changbin's patch 02/12 v3:

	https://lore.kernel.org/lkml/20190409155626.6049-3-changbin.du@gmail.com/

It doesn't touch the above line, nor the context lines, and it doesn't 
change more than 50% of the file. So, even if this patch gets merged
after the PCI changeset, git will very likely recognize it as a
rename and will apply it anyway.

> Since this doesn't look like it's targeting merge via the PCI tree,
> I'll let you two work out any conflicts.
> 
> Acked-by: Bjorn Helgaas <bhelgaas@google.com>

Thanks!
Mauro

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 64/79] docs: ioctl-number.txt: convert it to ReST format
  2019-04-22 14:05     ` Doug Ledford
@ 2019-04-22 14:17       ` Mauro Carvalho Chehab
  0 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 14:17 UTC (permalink / raw)
  To: Doug Ledford
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Federico Vaga, Harry Wei, Alex Shi,
	Jason Gunthorpe, linux-rdma

Em Mon, 22 Apr 2019 10:05:39 -0400
Doug Ledford <dledford@redhat.com> escreveu:

> On Mon, 2019-04-22 at 10:27 -0300, Mauro Carvalho Chehab wrote:
> > +0x1b  all                                                            InfiniBand Subsystem
> > +                                                                     <http://infiniband.sourceforge.net/>  
> 
> I did not know this link was in there.  That sourceforge site is 15
> years old and totally obsolete/irrelevant at this point.  This patch
> doesn't have the purpose of fixing this up, but now that it's pointed
> out, we'll make a follow up patch to correct this.

Yeah, I suspect that there are lots of broken links over there.

It seems that some people ended by prepending some broken URLs with:

	http://web.archive.org/web/%2A/

In order to use the web archive to get an old copy of such documents.

So, replacing the link with something like:

	http://web.archive.org/web/%2A/http://infiniband.sourceforge.net/

Would allow retrieving pages. It seems that the last version is there
at:

	https://web.archive.org/web/20190212201603/http://infiniband.sourceforge.net/

Yet, if are there any new repository with updated info, it would make sense
to replace it by the new stuff. 

Alternatively, one could import existing docs (if license is compatible
with GPLv2) and add to the Kernel documentation.

Thanks,
Mauro

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 63/79] docs: iio: convert to ReST
  2019-04-22 13:27   ` [PATCH v2 63/79] docs: iio: " Mauro Carvalho Chehab
@ 2019-04-22 14:25     ` Jonathan Cameron
  0 siblings, 0 replies; 124+ messages in thread
From: Jonathan Cameron @ 2019-04-22 14:25 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Hartmut Knaack, Lars-Peter Clausen,
	Peter Meerwald-Stadler, linux-iio

On Mon, 22 Apr 2019 10:27:52 -0300
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> wrote:

> Rename the iio documentation files to ReST, add an
> index for them and adjust in order to produce a nice html
> output via the Sphinx build system.
> 
> At its new index.rst, let's add a :orphan: while this is not linked to
> the main index.rst file, in order to avoid build warnings.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Thanks Mauro,

Looks good to me.
At somepoint, we should figure out how to fit these elements into
the main IIO docs, but this is a good intermediate step.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
>  .../iio/{ep93xx_adc.txt => ep93xx_adc.rst}    | 15 +++++-
>  .../{iio_configfs.txt => iio_configfs.rst}    | 52 +++++++++++--------
>  Documentation/iio/index.rst                   | 12 +++++
>  drivers/iio/Kconfig                           |  2 +-
>  4 files changed, 56 insertions(+), 25 deletions(-)
>  rename Documentation/iio/{ep93xx_adc.txt => ep93xx_adc.rst} (71%)
>  rename Documentation/iio/{iio_configfs.txt => iio_configfs.rst} (73%)
>  create mode 100644 Documentation/iio/index.rst
> 
> diff --git a/Documentation/iio/ep93xx_adc.txt b/Documentation/iio/ep93xx_adc.rst
> similarity index 71%
> rename from Documentation/iio/ep93xx_adc.txt
> rename to Documentation/iio/ep93xx_adc.rst
> index 23053e7817bd..4fd8dea3f6b8 100644
> --- a/Documentation/iio/ep93xx_adc.txt
> +++ b/Documentation/iio/ep93xx_adc.rst
> @@ -1,12 +1,16 @@
> -Cirrus Logic EP93xx ADC driver.
> +==============================
> +Cirrus Logic EP93xx ADC driver
> +==============================
>  
>  1. Overview
> +===========
>  
>  The driver is intended to work on both low-end (EP9301, EP9302) devices with
>  5-channel ADC and high-end (EP9307, EP9312, EP9315) devices with 10-channel
>  touchscreen/ADC module.
>  
>  2. Channel numbering
> +====================
>  
>  Numbering scheme for channels 0..4 is defined in EP9301 and EP9302 datasheets.
>  EP9307, EP9312 and EP9312 have 3 channels more (total 8), but the numbering is
> @@ -17,13 +21,20 @@ Assuming ep93xx_adc is IIO device0, you'd find the following entries under
>  
>    +-----------------+---------------+
>    | sysfs entry     | ball/pin name |
> -  +-----------------+---------------+
> +  +=================+===============+
>    | in_voltage0_raw | YM            |
> +  +-----------------+---------------+
>    | in_voltage1_raw | SXP           |
> +  +-----------------+---------------+
>    | in_voltage2_raw | SXM           |
> +  +-----------------+---------------+
>    | in_voltage3_raw | SYP           |
> +  +-----------------+---------------+
>    | in_voltage4_raw | SYM           |
> +  +-----------------+---------------+
>    | in_voltage5_raw | XP            |
> +  +-----------------+---------------+
>    | in_voltage6_raw | XM            |
> +  +-----------------+---------------+
>    | in_voltage7_raw | YP            |
>    +-----------------+---------------+
> diff --git a/Documentation/iio/iio_configfs.txt b/Documentation/iio/iio_configfs.rst
> similarity index 73%
> rename from Documentation/iio/iio_configfs.txt
> rename to Documentation/iio/iio_configfs.rst
> index 4e5f101837a8..ecbfdb3afef7 100644
> --- a/Documentation/iio/iio_configfs.txt
> +++ b/Documentation/iio/iio_configfs.rst
> @@ -1,6 +1,9 @@
> +===============================
>  Industrial IIO configfs support
> +===============================
>  
>  1. Overview
> +===========
>  
>  Configfs is a filesystem-based manager of kernel objects. IIO uses some
>  objects that could be easily configured using configfs (e.g.: devices,
> @@ -10,20 +13,22 @@ See Documentation/filesystems/configfs/configfs.txt for more information
>  about how configfs works.
>  
>  2. Usage
> +========
>  
>  In order to use configfs support in IIO we need to select it at compile
>  time via CONFIG_IIO_CONFIGFS config option.
>  
> -Then, mount the configfs filesystem (usually under /config directory):
> +Then, mount the configfs filesystem (usually under /config directory)::
>  
> -$ mkdir /config
> -$ mount -t configfs none /config
> +  $ mkdir /config
> +  $ mount -t configfs none /config
>  
>  At this point, all default IIO groups will be created and can be accessed
>  under /config/iio. Next chapters will describe available IIO configuration
>  objects.
>  
>  3. Software triggers
> +====================
>  
>  One of the IIO default configfs groups is the "triggers" group. It is
>  automagically accessible when the configfs is mounted and can be found
> @@ -31,40 +36,40 @@ under /config/iio/triggers.
>  
>  IIO software triggers implementation offers support for creating multiple
>  trigger types. A new trigger type is usually implemented as a separate
> -kernel module following the interface in include/linux/iio/sw_trigger.h:
> +kernel module following the interface in include/linux/iio/sw_trigger.h::
>  
> -/*
> - * drivers/iio/trigger/iio-trig-sample.c
> - * sample kernel module implementing a new trigger type
> - */
> -#include <linux/iio/sw_trigger.h>
> +  /*
> +   * drivers/iio/trigger/iio-trig-sample.c
> +   * sample kernel module implementing a new trigger type
> +   */
> +  #include <linux/iio/sw_trigger.h>
>  
>  
> -static struct iio_sw_trigger *iio_trig_sample_probe(const char *name)
> -{
> +  static struct iio_sw_trigger *iio_trig_sample_probe(const char *name)
> +  {
>  	/*
>  	 * This allocates and registers an IIO trigger plus other
>  	 * trigger type specific initialization.
>  	 */
> -}
> +  }
>  
> -static int iio_trig_hrtimer_remove(struct iio_sw_trigger *swt)
> -{
> +  static int iio_trig_hrtimer_remove(struct iio_sw_trigger *swt)
> +  {
>  	/*
>  	 * This undoes the actions in iio_trig_sample_probe
>  	 */
> -}
> +  }
>  
> -static const struct iio_sw_trigger_ops iio_trig_sample_ops = {
> +  static const struct iio_sw_trigger_ops iio_trig_sample_ops = {
>  	.probe		= iio_trig_sample_probe,
>  	.remove		= iio_trig_sample_remove,
> -};
> +  };
>  
> -static struct iio_sw_trigger_type iio_trig_sample = {
> +  static struct iio_sw_trigger_type iio_trig_sample = {
>  	.name = "trig-sample",
>  	.owner = THIS_MODULE,
>  	.ops = &iio_trig_sample_ops,
> -};
> +  };
>  
>  module_iio_sw_trigger_driver(iio_trig_sample);
>  
> @@ -73,21 +78,24 @@ iio-trig-sample module will create 'trig-sample' trigger type directory
>  /config/iio/triggers/trig-sample.
>  
>  We support the following interrupt sources (trigger types):
> +
>  	* hrtimer, uses high resolution timers as interrupt source
>  
>  3.1 Hrtimer triggers creation and destruction
> +---------------------------------------------
>  
>  Loading iio-trig-hrtimer module will register hrtimer trigger types allowing
>  users to create hrtimer triggers under /config/iio/triggers/hrtimer.
>  
> -e.g:
> +e.g::
>  
> -$ mkdir /config/iio/triggers/hrtimer/instance1
> -$ rmdir /config/iio/triggers/hrtimer/instance1
> +  $ mkdir /config/iio/triggers/hrtimer/instance1
> +  $ rmdir /config/iio/triggers/hrtimer/instance1
>  
>  Each trigger can have one or more attributes specific to the trigger type.
>  
>  3.2 "hrtimer" trigger types attributes
> +--------------------------------------
>  
>  "hrtimer" trigger type doesn't have any configurable attribute from /config dir.
>  It does introduce the sampling_frequency attribute to trigger directory.
> diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst
> new file mode 100644
> index 000000000000..0593dca89a94
> --- /dev/null
> +++ b/Documentation/iio/index.rst
> @@ -0,0 +1,12 @@
> +:orphan:
> +
> +==============
> +Industrial I/O
> +==============
> +
> +.. toctree::
> +   :maxdepth: 1
> +
> +   iio_configfs
> +
> +   ep93xx_adc
> diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
> index 014006d1cbb6..c1aa87db19ff 100644
> --- a/drivers/iio/Kconfig
> +++ b/drivers/iio/Kconfig
> @@ -28,7 +28,7 @@ config IIO_CONFIGFS
>  	help
>  	  This allows configuring various IIO bits through configfs
>  	  (e.g. software triggers). For more info see
> -	  Documentation/iio/iio_configfs.txt.
> +	  Documentation/iio/iio_configfs.rst.
>  
>  config IIO_TRIGGER
>  	bool "Enable triggered sampling support"


^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 48/79] docs: driver-model: convert docs to ReST and rename to *.rst
  2019-04-22 13:27   ` [PATCH v2 48/79] docs: driver-model: " Mauro Carvalho Chehab
@ 2019-04-22 14:47     ` Julia Lawall
  2019-04-22 22:30     ` Guenter Roeck
  1 sibling, 0 replies; 124+ messages in thread
From: Julia Lawall @ 2019-04-22 14:47 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Linus Walleij, Bartosz Golaszewski,
	Jean Delvare, Guenter Roeck, Greg Kroah-Hartman,
	Rafael J. Wysocki, Jeff Kirsher, David S. Miller, Julia Lawall,
	Gilles Muller, Nicolas Palix, Michal Marek, linux-gpio,
	linux-hwmon, intel-wired-lan, netdev, cocci

> diff --git a/scripts/coccinelle/free/devm_free.cocci b/scripts/coccinelle/free/devm_free.cocci
> index b2a2cf8bf81f..e32236a979a8 100644
> --- a/scripts/coccinelle/free/devm_free.cocci
> +++ b/scripts/coccinelle/free/devm_free.cocci
> @@ -2,7 +2,7 @@
>  /// functions.  Values allocated using the devm_functions are freed when
>  /// the device is detached, and thus the use of the standard freeing
>  /// function would cause a double free.
> -/// See Documentation/driver-model/devres.txt for more information.
> +/// See Documentation/driver-model/devres.rst for more information.
>  ///
>  /// A difficulty of detecting this problem is that the standard freeing
>  /// function might be called from a different function than the one

Acked-by: Julia Lawall <julia.lawall@lip6.fr>



> --
> 2.20.1
>
>

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 00/79] Convert files to ReST
  2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
                     ` (75 preceding siblings ...)
  2019-04-22 13:28   ` [PATCH v2 79/79] docs: block: " Mauro Carvalho Chehab
@ 2019-04-22 14:51   ` Mauro Carvalho Chehab
       [not found]   ` <cda57849a6462ccc72dcd360b30068ab6a1021c4.1555938376.git.mchehab+samsung@kernel.org>
  77 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-22 14:51 UTC (permalink / raw)
  To: Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, linux-kernel, Jonathan Corbet,
	Palmer Dabbelt, Albert Ou, Alexei Starovoitov, Daniel Borkmann,
	Martin KaFai Lau, Song Liu, Yonghong Song, Greentime Hu,
	Vincent Chen, linux-riscv, netdev, bpf, Changbin Du,
	Rafael J. Wysocki

Em Mon, 22 Apr 2019 10:26:49 -0300
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> escreveu:

> This series convert lots of files to be properly parsed by Sphinx
> as ReST files.
> 
> As it touches on lot of stuff, this series is based on linux-next,
> at tag next-20190418.
> 
> The version 2 is mainly focused on addressing a comment I received
> from several subsystem maintainters:
> 
> - While it was doing the conversion, the files were not
>   being renamed to ReST. So, they weren't producing any document.
> 
> So, I opted to do the rename as well, on each patch, and to add a
> :orphan:  markup at the beginning of each file, in order to shut up
> the Sphinx warning that the file was not included on any TOC.
> 
> The second version of this series also touches a lot more directories
> without any index.rst.
> 
> After this patch, just a few directories at Documentation won't have
> an index.rst file:
> 
>     $ for i in $(find Documentation/ -name '*.txt'|perl -ne 's,([^/]*/[^/]*/).*,\1,; print $_;'|sort|uniq|grep -v Documentation/output|grep -v Documentation/sphinx); do if [ ! -f $i/index.rst ]; then echo $i; fi; done|grep -v .txt
> 
>     Documentation/ABI/
>     Documentation/devicetree/
>     Documentation/features/
>     Documentation/platform/
>     Documentation/RCU/
>     Documentation/scsi/
>     Documentation/virtual/
> 
> I'm working on another patch patch series with removes the :orphan: from
> the added files while adding them to some book. As such series would
> cause lots of conflicts, the best would be to wait for this series to be applied
> by each subsystem maintainer before adding it (probably late on some
> merge window).
> 
> Ah, I removed the patches with converts /acpi, /x86 and /PCI from this
> submission. As pointed by Rafael, Changbin is already working on
> those.
> 
> Also, I got some acks from some of those conversions. I'm opting to not
> adding here, as all patches were changed (due to the rename and addition
> of the index.rst file). So, if you send your ack already, feel free to re-send.
> 
> Both this series and  the next steps are on my devel git tree,
> at:
> 
> 	https://git.linuxtv.org/mchehab/experimental.git/log/?h=convert_rst_v2
> 
> The final output in html can be seen at:
> 
> 	https://www.infradead.org/~mchehab/rst_conversion/
> 
> Mauro Carvalho Chehab (79):
>   docs: core-api: fix broken references for div64.c and gcd.c
>   docs: trace: fix some Sphinx warnings
>   scripts/documentation-file-ref-check: don't parse Next/ dir
>   docs: aoe: convert docs to ReST and rename to *.rst
>   docs: arm64: convert docs to ReST and rename to .rst
>   docs: cdrom-standard.tex: convert from LaTeX to ReST
>   docs: cdrom: convert docs to ReST and rename to *.rst
>   docs: cgroup-v1: convert docs to ReST and rename to *.rst
>   docs: cgroup-v1/blkio-controller.rst: add a note about CFQ scheduler
>   docs: cpu-freq: convert docs to ReST and rename to *.rst
>   docs: convert docs to ReST and rename to *.rst
>   docs: fault-injection: convert docs to ReST and rename to *.rst
>   docs: fb: convert docs to ReST and rename to *.rst
>   docs: fpga: convert docs to ReST and rename to *.rst
>   docs: gpio: convert docs to ReST and rename to *.rst
>   docs: ide: convert docs to ReST and rename to *.rst
>   docs: infiniband: convert docs to ReST and rename to *.rst
>   docs: kbuild: convert docs to ReST and rename to *.rst
>   docs: kdump: convert docs to ReST and rename to *.rst
>   docs: livepatch: convert docs to ReST and rename to *.rst
>   docs: locking: convert docs to ReST and rename to *.rst
>   docs: mic: convert docs to ReST and rename to *.rst
>   docs: netlabel: convert docs to ReST and rename to *.rst
>   docs: pcmcia: convert docs to ReST and rename to *.rst
>   docs: convert docs to ReST and rename to *.rst
>   docs: powerpc: convert docs to ReST and rename to *.rst
>   docs: pps.txt: convert to ReST and rename to pps.rst
>   docs: ptp.txt: convert to ReST and move to driver-api
>   docs: riscv: convert docs to ReST and rename to *.rst
>   docs: Debugging390.txt: convert table to ascii artwork
>   docs: s390: convert docs to ReST and rename to *.rst
>   s390: include/asm/debug.h add kerneldoc markups
>   docs: serial: convert docs to ReST and rename to *.rst
>   docs: target: convert docs to ReST and rename to *.rst
>   docs: timers: convert docs to ReST and rename to *.rst
>   docs: watchdog: convert docs to ReST and rename to *.rst
>   docs: xilinx: convert eemi.txt to eemi.rst
>   docs: scheduler: convert docs to ReST and rename to *.rst
>   docs: EDID/HOWTO.txt: convert it and rename to howto.rst
>   convert docs to ReST and rename to *.rst
>   docs: lcd-panel-cgram.txt: convert docs to ReST and rename to *.rst
>   docs: lp855x-driver.txt: convert to ReST and move to kernel-api
>   docs: m68k: convert docs to ReST and rename to *.rst
>   docs: cma/debugfs.txt: convert docs to ReST and rename to *.rst
>   docs: console.txt: convert docs to ReST and rename to *.rst
>   docs: pti_intel_mid.txt: convert it to pti_intel_mid.rst
>   docs: early-userspace: convert docs to ReST and rename to *.rst
>   docs: driver-model: convert docs to ReST and rename to *.rst
>   docs: arm: convert docs to ReST and rename to *.rst
>   docs: memory-devices: convert ti-emif.txt to ReST
>   docs: xen-tpmfront.txt: convert it to .rst
>   docs: bus-devices: ti-gpmc.rst: convert it to ReST
>   docs: nvmem: convert docs to ReST and rename to *.rst
>   docs: phy: convert samsung-usb2.txt to ReST format
>   docs: rbtree.txt: fix Sphinx build warnings
>   docs: Documentation/*.txt: rename all ReST files to *.rst
>   docs: accounting: convert to ReST
>   docs: fmc: convert to ReST
>   docs: hid: convert to ReST
>   docs: ia64: convert to ReST
>   docs: leds: convert to ReST
>   docs: laptops: convert to ReST
>   docs: iio: convert to ReST
>   docs: ioctl-number.txt: convert it to ReST format
>   docs: ioctl: convert to ReST
>   docs: namespaces: convert to ReST
>   docs: nfc: convert to ReST
>   docs: md: convert to ReST
>   docs: mtd: convert to ReST
>   docs: nvdimm: convert to ReST
>   docs: xtensa: convert to ReST
>   docs: mmc: convert to ReST
>   docs: sparc: convert to ReST
>   docs: thermal: convert to ReST
>   docs: rapidio: convert to ReST
>   docs: blockdev: convert to ReST
>   docs: perf: convert to ReST
>   docs: sysctl: convert to ReST
>   docs: block: convert to ReST
> 
>  Documentation/ABI/removed/sysfs-class-rfkill  |    2 +-
>  Documentation/ABI/stable/sysfs-class-rfkill   |    2 +-
>  Documentation/ABI/stable/sysfs-devices-node   |    2 +-
>  Documentation/ABI/testing/procfs-diskstats    |    2 +-
>  Documentation/ABI/testing/sysfs-block         |    2 +-
>  Documentation/ABI/testing/sysfs-block-device  |    2 +-
>  .../ABI/testing/sysfs-class-powercap          |    2 +-
>  .../ABI/testing/sysfs-class-switchtec         |    2 +-
>  .../ABI/testing/sysfs-devices-system-cpu      |    4 +-
>  .../ABI/testing/sysfs-kernel-livepatch        |    2 +-
>  Documentation/ABI/testing/sysfs-kernel-uids   |    2 +-
>  .../ABI/testing/sysfs-platform-asus-laptop    |    2 +-
>  .../{DMA-API-HOWTO.txt => DMA-API-HOWTO.rst}  |    2 +
>  Documentation/{DMA-API.txt => DMA-API.rst}    |    8 +-
>  .../{DMA-ISA-LPC.txt => DMA-ISA-LPC.rst}      |    4 +-
>  ...{DMA-attributes.txt => DMA-attributes.rst} |    2 +
>  Documentation/EDID/{HOWTO.txt => howto.rst}   |   31 +-
>  Documentation/{IPMI.txt => IPMI.rst}          |    2 +
>  .../{IRQ-affinity.txt => IRQ-affinity.rst}    |    2 +
>  .../{IRQ-domain.txt => IRQ-domain.rst}        |    2 +
>  Documentation/{IRQ.txt => IRQ.rst}            |    2 +
>  .../{Intel-IOMMU.txt => Intel-IOMMU.rst}      |    2 +
>  Documentation/PCI/pci-error-recovery.txt      |    2 +-
>  Documentation/PCI/pci.txt                     |   10 +-
>  Documentation/{SAK.txt => SAK.rst}            |    2 +
>  Documentation/{SM501.txt => SM501.rst}        |    2 +
>  .../{cgroupstats.txt => cgroupstats.rst}      |   14 +-
>  ...ay-accounting.txt => delay-accounting.rst} |   61 +-
>  Documentation/accounting/index.rst            |   14 +
>  Documentation/accounting/{psi.txt => psi.rst} |   40 +-
>  ...kstats-struct.txt => taskstats-struct.rst} |   53 +-
>  .../{taskstats.txt => taskstats.rst}          |   15 +-
>  Documentation/admin-guide/README.rst          |    2 +-
>  Documentation/admin-guide/bug-hunting.rst     |    2 +-
>  Documentation/admin-guide/cgroup-v2.rst       |    6 +-
>  .../admin-guide/kernel-parameters.rst         |    2 +-
>  .../admin-guide/kernel-parameters.txt         |   64 +-
>  Documentation/admin-guide/l1tf.rst            |    4 +-
>  Documentation/admin-guide/mm/index.rst        |    2 +-
>  Documentation/admin-guide/mm/ksm.rst          |    2 +-
>  .../admin-guide/mm/numa_memory_policy.rst     |    2 +-
>  Documentation/aoe/{aoe.txt => aoe.rst}        |   63 +-
>  Documentation/aoe/examples.rst                |   23 +
>  Documentation/aoe/index.rst                   |   19 +
>  Documentation/aoe/{todo.txt => todo.rst}      |    3 +
>  Documentation/aoe/udev.txt                    |    2 +-
>  Documentation/arm/Marvell/README              |  395 ---
>  Documentation/arm/Netwinder                   |   78 -
>  Documentation/arm/SA1100/FreeBird             |   21 -
>  Documentation/arm/SA1100/empeg                |    2 -
>  Documentation/arm/SA1100/serial_UART          |   47 -
>  Documentation/arm/{README => arm.rst}         |   50 +-
>  Documentation/arm/{Booting => booting.rst}    |   71 +-
>  ...ance.txt => cluster-pm-race-avoidance.rst} |  177 +-
>  .../arm/{firmware.txt => firmware.rst}        |   14 +-
>  Documentation/arm/index.rst                   |   80 +
>  .../arm/{Interrupts => interrupts.rst}        |   86 +-
>  Documentation/arm/{IXP4xx => ixp4xx.rst}      |   61 +-
>  ...nel_mode_neon.txt => kernel_mode_neon.rst} |    3 +
>  ...er_helpers.txt => kernel_user_helpers.rst} |   79 +-
>  .../keystone/{knav-qmss.txt => knav-qmss.rst} |    6 +-
>  .../keystone/{Overview.txt => overview.rst}   |   47 +-
>  Documentation/arm/marvel.rst                  |  488 +++
>  .../arm/{mem_alignment => mem_alignment.rst}  |   11 +-
>  Documentation/arm/{memory.txt => memory.rst}  |    9 +-
>  .../arm/{Microchip/README => microchip.rst}   |   63 +-
>  Documentation/arm/netwinder.rst               |   85 +
>  Documentation/arm/nwfpe/index.rst             |   11 +
>  .../nwfpe/{README.FPE => netwinder-fpe.rst}   |   24 +-
>  Documentation/arm/nwfpe/{NOTES => notes.rst}  |    3 +
>  Documentation/arm/nwfpe/{README => nwfpe.rst} |   10 +-
>  Documentation/arm/nwfpe/{TODO => todo.rst}    |   47 +-
>  Documentation/arm/{OMAP/DSS => omap/dss.rst}  |  112 +-
>  Documentation/arm/omap/index.rst              |   10 +
>  .../arm/{OMAP/README => omap/omap.rst}        |    7 +
>  .../arm/{OMAP/omap_pm => omap/omap_pm.rst}    |   55 +-
>  Documentation/arm/{Porting => porting.rst}    |   14 +-
>  Documentation/arm/pxa/{mfp.txt => mfp.rst}    |  106 +-
>  .../{SA1100/ADSBitsy => sa1100/adsbitsy.rst}  |   14 +-
>  .../{SA1100/Assabet => sa1100/assabet.rst}    |  185 +-
>  .../arm/{SA1100/Brutus => sa1100/brutus.rst}  |   45 +-
>  .../arm/{SA1100/CERF => sa1100/cerf.rst}      |   10 +-
>  Documentation/arm/sa1100/freebird.rst         |   25 +
>  .../graphicsclient.rst}                       |   46 +-
>  .../graphicsmaster.rst}                       |   13 +-
>  .../HUW_WEBPANEL => sa1100/huw_webpanel.rst}  |    8 +-
>  Documentation/arm/sa1100/index.rst            |   23 +
>  .../arm/{SA1100/Itsy => sa1100/itsy.rst}      |   14 +-
>  .../arm/{SA1100/LART => sa1100/lart.rst}      |    3 +-
>  .../nanoEngine => sa1100/nanoengine.rst}      |    6 +-
>  .../{SA1100/Pangolin => sa1100/pangolin.rst}  |   10 +-
>  .../arm/{SA1100/PLEB => sa1100/pleb.rst}      |    6 +-
>  Documentation/arm/sa1100/serial_uart.rst      |   51 +
>  .../arm/{SA1100/Tifon => sa1100/tifon.rst}    |    4 +-
>  .../arm/{SA1100/Yopy => sa1100/yopy.rst}      |    5 +-
>  .../cpufreq.rst}                              |    5 +-
>  .../eb2410itx.rst}                            |    5 +-
>  .../GPIO.txt => samsung-s3c24xx/gpio.rst}     |   23 +-
>  .../H1940.txt => samsung-s3c24xx/h1940.rst}   |    5 +-
>  Documentation/arm/samsung-s3c24xx/index.rst   |   18 +
>  .../NAND.txt => samsung-s3c24xx/nand.rst}     |    6 +-
>  .../overview.rst}                             |   21 +-
>  .../s3c2412.rst}                              |    5 +-
>  .../s3c2413.rst}                              |    7 +-
>  .../smdk2440.rst}                             |    5 +-
>  .../suspend.rst}                              |   20 +-
>  .../usb-host.rst}                             |   16 +-
>  .../bootloader-interface.rst}                 |   27 +-
>  .../clksrc-change-registers.awk               |    0
>  .../{Samsung/GPIO.txt => samsung/gpio.rst}    |    7 +-
>  Documentation/arm/samsung/index.rst           |   10 +
>  .../Overview.txt => samsung/overview.rst}     |   15 +-
>  Documentation/arm/{Setup => setup.rst}        |   49 +-
>  .../arm/{SH-Mobile => sh-mobile}/.gitignore   |    0
>  .../overview.txt => spear/overview.rst}       |   20 +-
>  .../arm/sti/{overview.txt => overview.rst}    |   21 +-
>  ...h407-overview.txt => stih407-overview.rst} |    9 +-
>  ...h415-overview.txt => stih415-overview.rst} |    8 +-
>  ...h416-overview.txt => stih416-overview.rst} |    5 +-
>  ...h418-overview.txt => stih418-overview.rst} |    9 +-
>  .../arm/stm32/stm32f429-overview.rst          |    5 +-
>  .../arm/stm32/stm32f746-overview.rst          |    5 +-
>  .../arm/stm32/stm32f769-overview.rst          |    5 +-
>  .../arm/stm32/stm32h743-overview.rst          |    5 +-
>  .../arm/stm32/stm32mp157-overview.rst         |    1 +
>  Documentation/arm/{sunxi/README => sunxi.rst} |   98 +-
>  .../arm/sunxi/{clocks.txt => clocks.rst}      |    7 +-
>  .../arm/{swp_emulation => swp_emulation.rst}  |   24 +-
>  Documentation/arm/{tcm.txt => tcm.rst}        |   54 +-
>  Documentation/arm/{uefi.txt => uefi.rst}      |   39 +-
>  .../release-notes.rst}                        |    4 +-
>  Documentation/arm/{vlocks.txt => vlocks.rst}  |    9 +-
>  ...object_usage.txt => acpi_object_usage.rst} |  288 +-
>  .../arm64/{arm-acpi.txt => arm-acpi.rst}      |  155 +-
>  .../arm64/{booting.txt => booting.rst}        |   91 +-
>  ...egisters.txt => cpu-feature-registers.rst} |  190 +-
>  .../arm64/{elf_hwcaps.txt => elf_hwcaps.rst}  |   56 +-
>  .../{hugetlbpage.txt => hugetlbpage.rst}      |    7 +-
>  Documentation/arm64/index.rst                 |   28 +
>  ...structions.txt => legacy_instructions.rst} |   43 +-
>  Documentation/arm64/memory.rst                |   98 +
>  Documentation/arm64/memory.txt                |   97 -
>  ...ication.txt => pointer-authentication.rst} |    2 +
>  ...{silicon-errata.txt => silicon-errata.rst} |   63 +-
>  Documentation/arm64/{sve.txt => sve.rst}      |   12 +-
>  ...agged-pointers.txt => tagged-pointers.rst} |    6 +-
>  .../{atomic_bitops.txt => atomic_bitops.rst}  |    2 +
>  ...cd-panel-cgram.txt => lcd-panel-cgram.rst} |    9 +-
>  Documentation/backlight/lp855x-driver.rst     |   83 +
>  Documentation/backlight/lp855x-driver.txt     |   66 -
>  .../{bfq-iosched.txt => bfq-iosched.rst}      |   68 +-
>  .../block/{biodoc.txt => biodoc.rst}          |  365 ++-
>  .../block/{biovecs.txt => biovecs.rst}        |   20 +-
>  Documentation/block/capability.rst            |   18 +
>  Documentation/block/capability.txt            |   15 -
>  ...ne-partition.txt => cmdline-partition.rst} |   13 +-
>  ...{data-integrity.txt => data-integrity.rst} |   58 +-
>  ...dline-iosched.txt => deadline-iosched.rst} |   19 +-
>  Documentation/block/index.rst                 |   25 +
>  .../block/{ioprio.txt => ioprio.rst}          |   95 +-
>  .../{kyber-iosched.txt => kyber-iosched.rst}  |    3 +-
>  .../block/{null_blk.txt => null_blk.rst}      |   65 +-
>  Documentation/block/{pr.txt => pr.rst}        |   14 +-
>  .../{queue-sysfs.txt => queue-sysfs.rst}      |    7 +-
>  .../block/{request.txt => request.rst}        |   47 +-
>  Documentation/block/{stat.txt => stat.rst}    |   13 +-
>  ...witching-sched.txt => switching-sched.rst} |   28 +-
>  ...ontrol.txt => writeback_cache_control.rst} |   12 +-
>  ...structure-v9.txt => data-structure-v9.rst} |    6 +-
>  Documentation/blockdev/drbd/figures.rst       |   28 +
>  .../blockdev/drbd/{README.txt => index.rst}   |   15 +-
>  .../blockdev/{floppy.txt => floppy.rst}       |   88 +-
>  Documentation/blockdev/index.rst              |   16 +
>  Documentation/blockdev/{nbd.txt => nbd.rst}   |    1 +
>  .../blockdev/{paride.txt => paride.rst}       |  144 +-
>  .../blockdev/{ramdisk.txt => ramdisk.rst}     |   55 +-
>  Documentation/blockdev/{zram.txt => zram.rst} |  197 +-
>  .../{bt8xxgpio.txt => bt8xxgpio.rst}          |    2 +
>  Documentation/{btmrvl.txt => btmrvl.rst}      |    2 +
>  .../bus-devices/{ti-gpmc.txt => ti-gpmc.rst}  |  159 +-
>  ...-mapping.txt => bus-virt-phys-mapping.rst} |    4 +-
>  Documentation/cdrom/Makefile                  |   21 -
>  Documentation/cdrom/cdrom-standard.rst        | 1063 +++++++
>  Documentation/cdrom/cdrom-standard.tex        | 1026 -------
>  Documentation/cdrom/{ide-cd => ide-cd.rst}    |  196 +-
>  Documentation/cdrom/index.rst                 |   19 +
>  ...{packet-writing.txt => packet-writing.rst} |   27 +-
>  ...io-controller.txt => blkio-controller.rst} |  103 +-
>  .../cgroup-v1/{cgroups.txt => cgroups.rst}    |  184 +-
>  .../cgroup-v1/{cpuacct.txt => cpuacct.rst}    |   15 +-
>  .../cgroup-v1/{cpusets.txt => cpusets.rst}    |  205 +-
>  .../cgroup-v1/{devices.txt => devices.rst}    |   40 +-
>  ...er-subsystem.txt => freezer-subsystem.rst} |   14 +-
>  .../cgroup-v1/{hugetlb.txt => hugetlb.rst}    |   31 +-
>  Documentation/cgroup-v1/index.rst             |   30 +
>  .../{memcg_test.txt => memcg_test.rst}        |  261 +-
>  .../cgroup-v1/{memory.txt => memory.rst}      |  449 +--
>  .../cgroup-v1/{net_cls.txt => net_cls.rst}    |   37 +-
>  .../cgroup-v1/{net_prio.txt => net_prio.rst}  |   24 +-
>  .../cgroup-v1/{pids.txt => pids.rst}          |   78 +-
>  .../cgroup-v1/{rdma.txt => rdma.rst}          |   66 +-
>  ...g-warn-once.txt => clearing-warn-once.rst} |    2 +
>  .../cma/{debugfs.txt => debugfs.rst}          |    8 +-
>  .../{connector.txt => connector.rst}          |  130 +-
>  .../console/{console.txt => console.rst}      |   63 +-
>  Documentation/core-api/kernel-api.rst         |    4 +-
>  Documentation/core-api/printk-formats.rst     |    2 +-
>  .../{amd-powernow.txt => amd-powernow.rst}    |   11 +-
>  Documentation/cpu-freq/{core.txt => core.rst} |   68 +-
>  .../{cpu-drivers.txt => cpu-drivers.rst}      |  217 +-
>  ...pufreq-nforce2.txt => cpufreq-nforce2.rst} |   12 +-
>  Documentation/cpu-freq/cpufreq-stats.rst      |  128 +
>  Documentation/cpu-freq/cpufreq-stats.txt      |  127 -
>  Documentation/cpu-freq/index.rst              |   52 +
>  Documentation/cpu-freq/index.txt              |   56 -
>  .../{pcc-cpufreq.txt => pcc-cpufreq.rst}      |  102 +-
>  Documentation/{cpu-load.txt => cpu-load.rst}  |    2 +
>  .../{cputopology.txt => cputopology.rst}      |    2 +
>  Documentation/{crc32.txt => crc32.rst}        |    2 +
>  Documentation/{dcdbas.txt => dcdbas.rst}      |    2 +
>  ...ging-modules.txt => debugging-modules.rst} |    2 +
>  ...hci1394.txt => debugging-via-ohci1394.rst} |    2 +
>  Documentation/{dell_rbu.txt => dell_rbu.rst}  |    2 +
>  ...{cache-policies.txt => cache-policies.rst} |   24 +-
>  .../device-mapper/{cache.txt => cache.rst}    |  206 +-
>  .../device-mapper/{delay.txt => delay.rst}    |   29 +-
>  .../{dm-crypt.txt => dm-crypt.rst}            |   57 +-
>  .../{dm-flakey.txt => dm-flakey.rst}          |   45 +-
>  .../{dm-init.txt => dm-init.rst}              |   75 +-
>  .../{dm-integrity.txt => dm-integrity.rst}    |   55 +-
>  .../device-mapper/{dm-io.txt => dm-io.rst}    |   14 +-
>  .../device-mapper/{dm-log.txt => dm-log.rst}  |    5 +-
>  ...m-queue-length.txt => dm-queue-length.rst} |   25 +-
>  .../{dm-raid.txt => dm-raid.rst}              |  225 +-
>  ...m-service-time.txt => dm-service-time.rst} |   68 +-
>  Documentation/device-mapper/dm-uevent.rst     |  110 +
>  Documentation/device-mapper/dm-uevent.txt     |   97 -
>  .../{dm-zoned.txt => dm-zoned.rst}            |   10 +-
>  .../device-mapper/{era.txt => era.rst}        |   36 +-
>  Documentation/device-mapper/index.rst         |   44 +
>  .../device-mapper/{kcopyd.txt => kcopyd.rst}  |   10 +-
>  Documentation/device-mapper/linear.rst        |   63 +
>  Documentation/device-mapper/linear.txt        |   61 -
>  .../{log-writes.txt => log-writes.rst}        |   91 +-
>  ...ersistent-data.txt => persistent-data.rst} |    4 +
>  .../{snapshot.txt => snapshot.rst}            |  116 +-
>  .../{statistics.txt => statistics.rst}        |   66 +-
>  Documentation/device-mapper/striped.rst       |   61 +
>  Documentation/device-mapper/striped.txt       |   57 -
>  .../device-mapper/{switch.txt => switch.rst}  |   47 +-
>  ...provisioning.txt => thin-provisioning.rst} |   68 +-
>  .../{unstriped.txt => unstriped.rst}          |  111 +-
>  .../device-mapper/{verity.txt => verity.rst}  |   20 +-
>  .../{writecache.txt => writecache.rst}        |   13 +-
>  .../device-mapper/{zero.txt => zero.rst}      |   14 +-
>  Documentation/devicetree/bindings/arm/xen.txt |    2 +-
>  .../devicetree/bindings/phy/phy-bindings.txt  |    2 +-
>  .../devicetree/booting-without-of.txt         |    4 +-
>  Documentation/{digsig.txt => digsig.rst}      |    2 +
>  Documentation/driver-api/gpio/driver.rst      |    2 +-
>  Documentation/driver-api/pm/devices.rst       |    6 +-
>  .../{pps/pps.txt => driver-api/pps.rst}       |   67 +-
>  .../{ptp/ptp.txt => driver-api/ptp.rst}       |   26 +-
>  Documentation/driver-api/s390-drivers.rst     |    4 +-
>  Documentation/driver-api/usb/dma.rst          |    6 +-
>  .../driver-api/usb/power-management.rst       |    2 +-
>  .../driver-model/{binding.txt => binding.rst} |   20 +-
>  .../driver-model/{bus.txt => bus.rst}         |   69 +-
>  .../driver-model/{class.txt => class.rst}     |   74 +-
>  ...esign-patterns.txt => design-patterns.rst} |  106 +-
>  .../driver-model/{device.txt => device.rst}   |   59 +-
>  .../driver-model/{devres.txt => devres.rst}   |   50 +-
>  .../driver-model/{driver.txt => driver.rst}   |  112 +-
>  Documentation/driver-model/index.rst          |   26 +
>  .../{overview.txt => overview.rst}            |   37 +-
>  .../{platform.txt => platform.rst}            |   30 +-
>  .../driver-model/{porting.txt => porting.rst} |  333 +--
>  .../{buffer-format.txt => buffer-format.rst}  |   19 +-
>  .../{README => early_userspace_support.rst}   |    3 +
>  Documentation/early-userspace/index.rst       |   18 +
>  Documentation/{efi-stub.txt => efi-stub.rst}  |    2 +
>  Documentation/{eisa.txt => eisa.rst}          |    6 +-
>  ...ault-injection.txt => fault-injection.rst} |  265 +-
>  Documentation/fault-injection/index.rst       |   20 +
>  ...r-inject.txt => notifier-error-inject.rst} |   18 +-
>  .../fault-injection/nvme-fault-injection.rst  |  120 +
>  .../fault-injection/nvme-fault-injection.txt  |  116 -
>  .../fault-injection/provoke-crashes.rst       |   48 +
>  .../fault-injection/provoke-crashes.txt       |   38 -
>  Documentation/fb/{api.txt => api.rst}         |   29 +-
>  Documentation/fb/{arkfb.txt => arkfb.rst}     |    8 +-
>  .../fb/{aty128fb.txt => aty128fb.rst}         |   35 +-
>  .../fb/{cirrusfb.txt => cirrusfb.rst}         |   47 +-
>  .../fb/{cmap_xfbdev.txt => cmap_xfbdev.rst}   |   57 +-
>  .../fb/{deferred_io.txt => deferred_io.rst}   |   28 +-
>  Documentation/fb/{efifb.txt => efifb.rst}     |   18 +-
>  .../fb/{ep93xx-fb.txt => ep93xx-fb.rst}       |   27 +-
>  Documentation/fb/{fbcon.txt => fbcon.rst}     |  181 +-
>  .../fb/{framebuffer.txt => framebuffer.rst}   |   79 +-
>  Documentation/fb/{gxfb.txt => gxfb.rst}       |   24 +-
>  Documentation/fb/index.rst                    |   50 +
>  .../fb/{intel810.txt => intel810.rst}         |   79 +-
>  Documentation/fb/{intelfb.txt => intelfb.rst} |   62 +-
>  .../fb/{internals.txt => internals.rst}       |   24 +-
>  Documentation/fb/{lxfb.txt => lxfb.rst}       |   25 +-
>  Documentation/fb/matroxfb.rst                 |  443 +++
>  Documentation/fb/matroxfb.txt                 |  413 ---
>  .../fb/{metronomefb.txt => metronomefb.rst}   |    8 +-
>  Documentation/fb/{modedb.txt => modedb.rst}   |   44 +-
>  Documentation/fb/pvr2fb.rst                   |   66 +
>  Documentation/fb/pvr2fb.txt                   |   65 -
>  Documentation/fb/{pxafb.txt => pxafb.rst}     |   81 +-
>  Documentation/fb/{s3fb.txt => s3fb.rst}       |    8 +-
>  .../fb/{sa1100fb.txt => sa1100fb.rst}         |   23 +-
>  Documentation/fb/sh7760fb.rst                 |  130 +
>  Documentation/fb/sh7760fb.txt                 |  131 -
>  Documentation/fb/{sisfb.txt => sisfb.rst}     |   40 +-
>  Documentation/fb/{sm501.txt => sm501.rst}     |    7 +-
>  Documentation/fb/{sm712fb.txt => sm712fb.rst} |   18 +-
>  Documentation/fb/sstfb.rst                    |  207 ++
>  Documentation/fb/sstfb.txt                    |  174 --
>  Documentation/fb/{tgafb.txt => tgafb.rst}     |   30 +-
>  .../fb/{tridentfb.txt => tridentfb.rst}       |   36 +-
>  Documentation/fb/{udlfb.txt => udlfb.rst}     |   55 +-
>  Documentation/fb/{uvesafb.txt => uvesafb.rst} |  128 +-
>  Documentation/fb/{vesafb.txt => vesafb.rst}   |  123 +-
>  Documentation/fb/viafb.rst                    |  297 ++
>  Documentation/fb/viafb.txt                    |  252 --
>  .../fb/{vt8623fb.txt => vt8623fb.rst}         |   10 +-
>  Documentation/filesystems/nfs/nfsroot.txt     |    2 +-
>  .../filesystems/ramfs-rootfs-initramfs.txt    |    4 +-
>  Documentation/filesystems/sysfs.txt           |    2 +-
>  Documentation/filesystems/tmpfs.txt           |    2 +-
>  .../filesystems/ubifs-authentication.md       |    4 +-
>  Documentation/fmc/{API.txt => api.rst}        |   10 +-
>  .../fmc/{carrier.txt => carrier.rst}          |   65 +-
>  .../fmc/{FMC-and-SDB.txt => fmc-and-sdb.rst}  |   19 +-
>  .../fmc/{fmc-chardev.txt => fmc-chardev.rst}  |    9 +-
>  .../fmc/{fmc-fakedev.txt => fmc-fakedev.rst}  |   13 +-
>  .../fmc/{fmc-trivial.txt => fmc-trivial.rst}  |   11 +-
>  ...-write-eeprom.txt => fmc-write-eeprom.rst} |   36 +-
>  .../fmc/{identifiers.txt => identifiers.rst}  |   20 +-
>  Documentation/fmc/index.rst                   |   21 +
>  .../fmc/{mezzanine.txt => mezzanine.rst}      |   34 +-
>  .../fmc/{parameters.txt => parameters.rst}    |   11 +-
>  Documentation/fpga/{dfl.txt => dfl.rst}       |   58 +-
>  Documentation/fpga/index.rst                  |   17 +
>  ...ex-requeue-pi.txt => futex-requeue-pi.rst} |    2 +
>  .../{gcc-plugins.txt => gcc-plugins.rst}      |    2 +
>  Documentation/gpio/index.rst                  |   17 +
>  Documentation/gpio/{sysfs.txt => sysfs.rst}   |   39 +-
>  Documentation/gpu/drm-mm.rst                  |    2 +-
>  .../hid/{hid-alps.txt => hid-alps.rst}        |   85 +-
>  .../hid/{hid-sensor.txt => hid-sensor.rst}    |  192 +-
>  .../{hid-transport.txt => hid-transport.rst}  |   82 +-
>  Documentation/hid/{hiddev.txt => hiddev.rst}  |  130 +-
>  Documentation/hid/{hidraw.txt => hidraw.rst}  |   53 +-
>  Documentation/hid/index.rst                   |   18 +
>  Documentation/hid/intel-ish-hid.rst           |  485 +++
>  Documentation/hid/intel-ish-hid.txt           |  454 ---
>  Documentation/hid/{uhid.txt => uhid.rst}      |   46 +-
>  Documentation/{highuid.txt => highuid.rst}    |    2 +
>  .../{hw_random.txt => hw_random.rst}          |    2 +
>  Documentation/hwmon/submitting-patches.rst    |    2 +-
>  .../{hwspinlock.txt => hwspinlock.rst}        |    2 +
>  .../ia64/{aliasing.txt => aliasing.rst}       |   71 +-
>  Documentation/ia64/{efirtc.txt => efirtc.rst} |   86 +-
>  .../ia64/{err_inject.txt => err_inject.rst}   |  347 ++-
>  Documentation/ia64/{fsys.txt => fsys.rst}     |  127 +-
>  Documentation/ia64/{README => ia64.rst}       |   26 +-
>  Documentation/ia64/index.rst                  |   18 +
>  .../ia64/{IRQ-redir.txt => irq-redir.rst}     |   32 +-
>  Documentation/ia64/{mca.txt => mca.rst}       |   10 +-
>  Documentation/ia64/{serial.txt => serial.rst} |   36 +-
>  Documentation/ia64/xen.rst                    |  206 ++
>  Documentation/ia64/xen.txt                    |  183 --
>  Documentation/ide/changelogs.rst              |   17 +
>  .../ide/{ide-tape.txt => ide-tape.rst}        |   23 +-
>  Documentation/ide/{ide.txt => ide.rst}        |  147 +-
>  Documentation/ide/index.rst                   |   21 +
>  ...arm-plug-howto.txt => warm-plug-howto.rst} |   10 +-
>  .../iio/{ep93xx_adc.txt => ep93xx_adc.rst}    |   15 +-
>  .../{iio_configfs.txt => iio_configfs.rst}    |   52 +-
>  Documentation/iio/index.rst                   |   12 +
>  Documentation/index.rst                       |    1 +
>  .../{core_locking.txt => core_locking.rst}    |   64 +-
>  Documentation/infiniband/index.rst            |   23 +
>  .../infiniband/{ipoib.txt => ipoib.rst}       |   24 +-
>  .../infiniband/{opa_vnic.txt => opa_vnic.rst} |  108 +-
>  .../infiniband/{sysfs.txt => sysfs.rst}       |    4 +-
>  .../{tag_matching.txt => tag_matching.rst}    |    5 +
>  .../infiniband/{user_mad.txt => user_mad.rst} |   33 +-
>  .../{user_verbs.txt => user_verbs.rst}        |   12 +-
>  Documentation/input/input.rst                 |    2 +-
>  .../{intel_txt.txt => intel_txt.rst}          |    2 +
>  .../{io-mapping.txt => io-mapping.rst}        |    2 +
>  .../{io_ordering.txt => io_ordering.rst}      |    2 +
>  ...g-up-ioctls.txt => botching-up-ioctls.rst} |    1 +
>  Documentation/ioctl/cdrom.rst                 | 1233 ++++++++
>  Documentation/ioctl/cdrom.txt                 |  967 ------
>  Documentation/ioctl/{hdio.txt => hdio.rst}    |  835 ++++--
>  Documentation/ioctl/index.rst                 |   16 +
>  ...{ioctl-decoding.txt => ioctl-decoding.rst} |   13 +-
>  Documentation/ioctl/ioctl-number.rst          |  360 +++
>  Documentation/ioctl/ioctl-number.txt          |  350 ---
>  Documentation/{iostats.txt => iostats.rst}    |    2 +
>  ...flags-tracing.txt => irqflags-tracing.rst} |    2 +
>  Documentation/{isa.txt => isa.rst}            |    2 +
>  Documentation/{isapnp.txt => isapnp.rst}      |    2 +
>  ...eaders_install.txt => headers_install.rst} |    5 +-
>  Documentation/kbuild/index.rst                |   27 +
>  Documentation/kbuild/issues.rst               |   11 +
>  .../kbuild/{kbuild.txt => kbuild.rst}         |  119 +-
>  ...nfig-language.txt => kconfig-language.rst} |  232 +-
>  ...anguage.txt => kconfig-macro-language.rst} |   37 +-
>  .../kbuild/{kconfig.txt => kconfig.rst}       |  136 +-
>  .../kbuild/{makefiles.txt => makefiles.rst}   |  518 ++--
>  .../kbuild/{modules.txt => modules.rst}       |  168 +-
>  Documentation/kdump/index.rst                 |   21 +
>  Documentation/kdump/{kdump.txt => kdump.rst}  |  131 +-
>  .../kdump/{vmcoreinfo.txt => vmcoreinfo.rst}  |   59 +-
>  Documentation/kernel-hacking/hacking.rst      |    4 +-
>  Documentation/kernel-hacking/locking.rst      |    2 +-
>  ...hreads.txt => kernel-per-CPU-kthreads.rst} |    6 +-
>  Documentation/{kobject.txt => kobject.rst}    |    4 +-
>  Documentation/{kprobes.txt => kprobes.rst}    |    2 +
>  Documentation/{kref.txt => kref.rst}          |    2 +
>  .../{asus-laptop.txt => asus-laptop.rst}      |   91 +-
>  ...otection.txt => disk-shock-protection.rst} |   32 +-
>  Documentation/laptops/index.rst               |   17 +
>  .../{laptop-mode.txt => laptop-mode.rst}      |  509 ++--
>  .../{sony-laptop.txt => sony-laptop.rst}      |   58 +-
>  .../laptops/{sonypi.txt => sonypi.rst}        |   28 +-
>  .../{thinkpad-acpi.txt => thinkpad-acpi.rst}  |  373 ++-
>  .../{toshiba_haps.txt => toshiba_haps.rst}    |   47 +-
>  Documentation/{ldm.txt => ldm.rst}            |    2 +
>  Documentation/leds/index.rst                  |   25 +
>  .../leds/{leds-blinkm.txt => leds-blinkm.rst} |   63 +-
>  ...s-class-flash.txt => leds-class-flash.rst} |   49 +-
>  .../leds/{leds-class.txt => leds-class.rst}   |   15 +-
>  .../leds/{leds-lm3556.txt => leds-lm3556.rst} |  100 +-
>  .../leds/{leds-lp3944.txt => leds-lp3944.rst} |   23 +-
>  Documentation/leds/leds-lp5521.rst            |  115 +
>  Documentation/leds/leds-lp5521.txt            |  101 -
>  Documentation/leds/leds-lp5523.rst            |  147 +
>  Documentation/leds/leds-lp5523.txt            |  130 -
>  Documentation/leds/leds-lp5562.rst            |  137 +
>  Documentation/leds/leds-lp5562.txt            |  120 -
>  Documentation/leds/leds-lp55xx.rst            |  224 ++
>  Documentation/leds/leds-lp55xx.txt            |  194 --
>  Documentation/leds/leds-mlxcpld.rst           |  118 +
>  Documentation/leds/leds-mlxcpld.txt           |  110 -
>  ...edtrig-oneshot.txt => ledtrig-oneshot.rst} |   11 +-
>  ...ig-transient.txt => ledtrig-transient.rst} |   63 +-
>  ...edtrig-usbport.txt => ledtrig-usbport.rst} |   11 +-
>  Documentation/leds/{uleds.txt => uleds.rst}   |    5 +-
>  .../{callbacks.txt => callbacks.rst}          |   12 +-
>  ...ive-patches.txt => cumulative-patches.rst} |   14 +-
>  Documentation/livepatch/index.rst             |   21 +
>  .../{livepatch.txt => livepatch.rst}          |   60 +-
>  ...e-elf-format.txt => module-elf-format.rst} |  211 +-
>  .../{shadow-vars.txt => shadow-vars.rst}      |   65 +-
>  Documentation/locking/index.rst               |   24 +
>  ...{lockdep-design.txt => lockdep-design.rst} |   41 +-
>  Documentation/locking/lockstat.rst            |  204 ++
>  Documentation/locking/lockstat.txt            |  183 --
>  .../{locktorture.txt => locktorture.rst}      |  105 +-
>  .../{mutex-design.txt => mutex-design.rst}    |   26 +-
>  ...t-mutex-design.txt => rt-mutex-design.rst} |  139 +-
>  .../locking/{rt-mutex.txt => rt-mutex.rst}    |   32 +-
>  .../locking/{spinlocks.txt => spinlocks.rst}  |   32 +-
>  ...w-mutex-design.txt => ww-mutex-design.rst} |   82 +-
>  ...kup-watchdogs.txt => lockup-watchdogs.rst} |    2 +
>  Documentation/{lsm.txt => lsm.rst}            |    2 +
>  Documentation/{lzo.txt => lzo.rst}            |    2 +
>  Documentation/m68k/index.rst                  |   17 +
>  ...{kernel-options.txt => kernel-options.rst} |  319 +-
>  Documentation/{mailbox.txt => mailbox.rst}    |    2 +
>  Documentation/md/index.rst                    |   12 +
>  .../md/{md-cluster.txt => md-cluster.rst}     |  188 +-
>  .../md/{raid5-cache.txt => raid5-cache.rst}   |   28 +-
>  .../md/{raid5-ppl.txt => raid5-ppl.rst}       |    2 +
>  Documentation/memory-barriers.txt             |    6 +-
>  .../{ti-emif.txt => ti-emif.rst}              |   27 +-
>  ...hameleon-bus.txt => men-chameleon-bus.rst} |    2 +
>  Documentation/mic/index.rst                   |   18 +
>  .../{mic_overview.txt => mic_overview.rst}    |    6 +-
>  .../{scif_overview.txt => scif_overview.rst}  |   58 +-
>  Documentation/mmc/index.rst                   |   13 +
>  .../{mmc-async-req.txt => mmc-async-req.rst}  |   53 +-
>  .../{mmc-dev-attrs.txt => mmc-dev-attrs.rst}  |   32 +-
>  .../{mmc-dev-parts.txt => mmc-dev-parts.rst}  |   13 +-
>  .../mmc/{mmc-tools.txt => mmc-tools.rst}      |    5 +-
>  Documentation/mtd/index.rst                   |   12 +
>  .../mtd/{intel-spi.txt => intel-spi.rst}      |   46 +-
>  .../mtd/{nand_ecc.txt => nand_ecc.rst}        |  481 +--
>  .../mtd/{spi-nor.txt => spi-nor.rst}          |    7 +-
>  ...bility-list.txt => compatibility-list.rst} |    9 +-
>  Documentation/namespaces/index.rst            |   11 +
>  ...ource-control.txt => resource-control.rst} |    4 +
>  .../{cipso_ipv4.txt => cipso_ipv4.rst}        |   19 +-
>  Documentation/netlabel/draft_ietf.rst         |    5 +
>  Documentation/netlabel/index.rst              |   21 +
>  .../{introduction.txt => introduction.rst}    |   16 +-
>  .../{lsm_interface.txt => lsm_interface.rst}  |   16 +-
>  Documentation/networking/ip-sysctl.txt        |    2 +-
>  Documentation/networking/scaling.rst          |    4 +-
>  Documentation/networking/timestamping.txt     |    2 +-
>  Documentation/nfc/index.rst                   |   11 +
>  .../nfc/{nfc-hci.txt => nfc-hci.rst}          |  163 +-
>  .../nfc/{nfc-pn544.txt => nfc-pn544.rst}      |    6 +-
>  .../{nommu-mmap.txt => nommu-mmap.rst}        |    2 +
>  Documentation/{ntb.txt => ntb.rst}            |    2 +
>  Documentation/{numastat.txt => numastat.rst}  |    2 +
>  Documentation/nvdimm/{btt.txt => btt.rst}     |  139 +-
>  Documentation/nvdimm/index.rst                |   12 +
>  .../nvdimm/{nvdimm.txt => nvdimm.rst}         |  518 ++--
>  .../nvdimm/{security.txt => security.rst}     |    4 +-
>  Documentation/nvmem/{nvmem.txt => nvmem.rst}  |  112 +-
>  Documentation/{padata.txt => padata.rst}      |    2 +
>  ...port-lowlevel.txt => parport-lowlevel.rst} |    2 +
>  .../{devicetable.txt => devicetable.rst}      |    4 +
>  ...{driver-changes.txt => driver-changes.rst} |   35 +-
>  .../pcmcia/{driver.txt => driver.rst}         |   18 +-
>  Documentation/pcmcia/index.rst                |   20 +
>  .../pcmcia/{locking.txt => locking.rst}       |   39 +-
>  ...-semaphore.txt => percpu-rw-semaphore.rst} |    2 +
>  .../perf/{arm-ccn.txt => arm-ccn.rst}         |   18 +-
>  .../perf/{arm_dsu_pmu.txt => arm_dsu_pmu.rst} |    5 +-
>  .../perf/{hisi-pmu.txt => hisi-pmu.rst}       |   35 +-
>  Documentation/perf/index.rst                  |   16 +
>  .../perf/{qcom_l2_pmu.txt => qcom_l2_pmu.rst} |    3 +-
>  .../perf/{qcom_l3_pmu.txt => qcom_l3_pmu.rst} |    3 +-
>  .../{thunderx2-pmu.txt => thunderx2-pmu.rst}  |   25 +-
>  .../perf/{xgene-pmu.txt => xgene-pmu.rst}     |    3 +-
>  Documentation/{phy.txt => phy.rst}            |    2 +
>  .../{samsung-usb2.txt => samsung-usb2.rst}    |   62 +-
>  Documentation/{pi-futex.txt => pi-futex.rst}  |    4 +-
>  Documentation/{pnp.txt => pnp.rst}            |    2 +
>  .../power/{apm-acpi.txt => apm-acpi.rst}      |   10 +-
>  ...m-debugging.txt => basic-pm-debugging.rst} |   79 +-
>  ...harger-manager.txt => charger-manager.rst} |  101 +-
>  ...rivers-testing.txt => drivers-testing.rst} |   15 +-
>  .../{energy-model.txt => energy-model.rst}    |  101 +-
>  ...ing-of-tasks.txt => freezing-of-tasks.rst} |   91 +-
>  Documentation/power/index.rst                 |   46 +
>  .../power/{interface.txt => interface.rst}    |   24 +-
>  Documentation/power/{opp.txt => opp.rst}      |  175 +-
>  Documentation/power/{pci.txt => pci.rst}      |   87 +-
>  ...qos_interface.txt => pm_qos_interface.rst} |  127 +-
>  Documentation/power/power_supply_class.rst    |  282 ++
>  Documentation/power/power_supply_class.txt    |  231 --
>  Documentation/power/powercap/powercap.rst     |  257 ++
>  Documentation/power/powercap/powercap.txt     |  236 --
>  .../regulator/{consumer.txt => consumer.rst}  |  141 +-
>  .../regulator/{design.txt => design.rst}      |    9 +-
>  .../regulator/{machine.txt => machine.rst}    |   47 +-
>  .../regulator/{overview.txt => overview.rst}  |   57 +-
>  Documentation/power/regulator/regulator.rst   |   32 +
>  Documentation/power/regulator/regulator.txt   |   30 -
>  .../power/{runtime_pm.txt => runtime_pm.rst}  |  234 +-
>  Documentation/power/{s2ram.txt => s2ram.rst}  |   20 +-
>  ...hotplug.txt => suspend-and-cpuhotplug.rst} |   42 +-
>  ...errupts.txt => suspend-and-interrupts.rst} |    2 +
>  ...ap-files.txt => swsusp-and-swap-files.rst} |   17 +-
>  ...{swsusp-dmcrypt.txt => swsusp-dmcrypt.rst} |  120 +-
>  Documentation/power/swsusp.rst                |  501 ++++
>  Documentation/power/swsusp.txt                |  446 ---
>  .../power/{tricks.txt => tricks.rst}          |    6 +-
>  ...serland-swsusp.txt => userland-swsusp.rst} |   55 +-
>  Documentation/power/{video.txt => video.rst}  |  156 +-
>  .../{bootwrapper.txt => bootwrapper.rst}      |   28 +-
>  .../{cpu_families.txt => cpu_families.rst}    |   23 +-
>  .../{cpu_features.txt => cpu_features.rst}    |    6 +-
>  Documentation/powerpc/{cxl.txt => cxl.rst}    |   46 +-
>  .../powerpc/{cxlflash.txt => cxlflash.rst}    |   10 +-
>  .../{DAWR-POWER9.txt => dawr-power9.rst}      |   10 +-
>  Documentation/powerpc/{dscr.txt => dscr.rst}  |   18 +-
>  ...ecovery.txt => eeh-pci-error-recovery.rst} |  108 +-
>  ...ed-dump.txt => firmware-assisted-dump.rst} |  119 +-
>  Documentation/powerpc/{hvcs.txt => hvcs.rst}  |  108 +-
>  Documentation/powerpc/index.rst               |   34 +
>  Documentation/powerpc/isa-versions.rst        |   13 +-
>  .../powerpc/{mpc52xx.txt => mpc52xx.rst}      |   12 +-
>  ...nv.txt => pci_iov_resource_on_powernv.rst} |   15 +-
>  .../powerpc/{pmu-ebb.txt => pmu-ebb.rst}      |    1 +
>  Documentation/powerpc/ptrace.rst              |  156 +
>  Documentation/powerpc/ptrace.txt              |  151 -
>  .../{qe_firmware.txt => qe_firmware.rst}      |   37 +-
>  .../{syscall64-abi.txt => syscall64-abi.rst}  |   29 +-
>  ...al_memory.txt => transactional_memory.rst} |   45 +-
>  ...reempt-locking.txt => preempt-locking.rst} |    2 +
>  Documentation/process/4.Coding.rst            |    2 +-
>  Documentation/process/coding-style.rst        |    2 +-
>  Documentation/process/submit-checklist.rst    |    4 +-
>  Documentation/process/submitting-drivers.rst  |    2 +-
>  Documentation/pti/pti_intel_mid.rst           |  106 +
>  Documentation/pti/pti_intel_mid.txt           |   99 -
>  Documentation/{pwm.txt => pwm.rst}            |    2 +
>  Documentation/rapidio/index.rst               |   15 +
>  .../{mport_cdev.txt => mport_cdev.rst}        |   47 +-
>  .../rapidio/{rapidio.txt => rapidio.rst}      |   39 +-
>  .../rapidio/{rio_cm.txt => rio_cm.rst}        |   66 +-
>  .../rapidio/{sysfs.txt => sysfs.rst}          |    4 +
>  .../rapidio/{tsi721.txt => tsi721.rst}        |   45 +-
>  Documentation/{rbtree.txt => rbtree.rst}      |    8 +-
>  .../{remoteproc.txt => remoteproc.rst}        |    4 +-
>  Documentation/{rfkill.txt => rfkill.rst}      |    2 +
>  Documentation/riscv/index.rst                 |   17 +
>  Documentation/riscv/{pmu.txt => pmu.rst}      |   98 +-
>  ...ust-futex-ABI.txt => robust-futex-ABI.rst} |    2 +
>  ...{robust-futexes.txt => robust-futexes.rst} |    2 +
>  Documentation/{rpmsg.txt => rpmsg.rst}        |    2 +
>  Documentation/{rtc.txt => rtc.rst}            |    2 +
>  Documentation/s390/{3270.txt => 3270.rst}     |   85 +-
>  Documentation/s390/Debugging390.txt           | 2142 --------------
>  Documentation/s390/{cds.txt => cds.rst}       |  354 ++-
>  .../s390/{CommonIO => common_io.rst}          |   49 +-
>  Documentation/s390/{DASD => dasd.rst}         |   33 +-
>  Documentation/s390/debugging390.rst           | 2613 +++++++++++++++++
>  .../{driver-model.txt => driver-model.rst}    |  179 +-
>  Documentation/s390/index.rst                  |   30 +
>  .../s390/{monreader.txt => monreader.rst}     |   85 +-
>  Documentation/s390/{qeth.txt => qeth.rst}     |   36 +-
>  Documentation/s390/s390dbf.rst                |  133 +
>  Documentation/s390/s390dbf.txt                |  667 -----
>  Documentation/s390/text_files.rst             |   11 +
>  .../s390/{vfio-ap.txt => vfio-ap.rst}         |  487 +--
>  .../s390/{vfio-ccw.txt => vfio-ccw.rst}       |   96 +-
>  .../s390/{zfcpdump.txt => zfcpdump.rst}       |    2 +
>  .../{completion.txt => completion.rst}        |   38 +-
>  Documentation/scheduler/index.rst             |   29 +
>  .../{sched-arch.txt => sched-arch.rst}        |   18 +-
>  .../{sched-bwc.txt => sched-bwc.rst}          |   30 +-
>  ...{sched-deadline.txt => sched-deadline.rst} |  297 +-
>  ...ed-design-CFS.txt => sched-design-CFS.rst} |   17 +-
>  .../{sched-domains.txt => sched-domains.rst}  |    8 +-
>  .../{sched-energy.txt => sched-energy.rst}    |   53 +-
>  ...-nice-design.txt => sched-nice-design.rst} |    6 +-
>  ...{sched-rt-group.txt => sched-rt-group.rst} |   30 +-
>  .../{sched-stats.txt => sched-stats.rst}      |   35 +-
>  Documentation/scheduler/text_files.rst        |    5 +
>  .../{xen-tpmfront.txt => xen-tpmfront.rst}    |  103 +-
>  .../{README.cycladesZ => cyclades_z.rst}      |    5 +-
>  Documentation/serial/{driver => driver.rst}   |  115 +-
>  Documentation/serial/index.rst                |   32 +
>  Documentation/serial/moxa-smartio             |  523 ----
>  Documentation/serial/moxa-smartio.rst         |  615 ++++
>  Documentation/serial/n_gsm.rst                |  103 +
>  Documentation/serial/n_gsm.txt                |   96 -
>  .../serial/{rocket.txt => rocket.rst}         |  144 +-
>  ...{serial-iso7816.txt => serial-iso7816.rst} |   21 +-
>  .../{serial-rs485.txt => serial-rs485.rst}    |   22 +-
>  Documentation/serial/{tty.txt => tty.rst}     |  111 +-
>  Documentation/{sgi-ioc4.txt => sgi-ioc4.rst}  |    2 +
>  Documentation/{siphash.txt => siphash.rst}    |    2 +
>  .../{smsc_ece1099.txt => smsc_ece1099.rst}    |    2 +
>  Documentation/sparc/{adi.txt => adi.rst}      |  174 +-
>  .../sparc/{console.txt => console.rst}        |    4 +-
>  Documentation/sparc/index.rst                 |   13 +
>  .../oradax/{oracle-dax.txt => oracle-dax.rst} |   58 +-
>  .../{speculation.txt => speculation.rst}      |    2 +
>  .../{static-keys.txt => static-keys.rst}      |    2 +
>  Documentation/{svga.txt => svga.rst}          |    2 +
>  .../{switchtec.txt => switchtec.rst}          |    4 +-
>  .../{sync_file.txt => sync_file.rst}          |    2 +
>  Documentation/sysctl/abi.rst                  |   67 +
>  Documentation/sysctl/abi.txt                  |   54 -
>  Documentation/sysctl/{fs.txt => fs.rst}       |  141 +-
>  Documentation/sysctl/{README => index.rst}    |   36 +-
>  .../sysctl/{kernel.txt => kernel.rst}         |  378 +--
>  Documentation/sysctl/{net.txt => net.rst}     |  141 +-
>  .../sysctl/{sunrpc.txt => sunrpc.rst}         |   13 +-
>  Documentation/sysctl/{user.txt => user.rst}   |   32 +-
>  Documentation/sysctl/{vm.txt => vm.rst}       |  264 +-
>  Documentation/target/index.rst                |   19 +
>  Documentation/target/scripts.rst              |   11 +
>  Documentation/target/tcm_mod_builder.rst      |  149 +
>  Documentation/target/tcm_mod_builder.txt      |  145 -
>  .../{tcmu-design.txt => tcmu-design.rst}      |  268 +-
>  Documentation/{tee.txt => tee.rst}            |    2 +
>  ...pu-cooling-api.txt => cpu-cooling-api.rst} |   39 +-
>  .../{exynos_thermal => exynos_thermal.rst}    |   47 +-
>  .../thermal/exynos_thermal_emulation          |   53 -
>  .../thermal/exynos_thermal_emulation.rst      |   61 +
>  Documentation/thermal/index.rst               |   18 +
>  ...el_powerclamp.txt => intel_powerclamp.rst} |  177 +-
>  .../{nouveau_thermal => nouveau_thermal.rst}  |   54 +-
>  ...ower_allocator.txt => power_allocator.rst} |  140 +-
>  .../thermal/{sysfs-api.txt => sysfs-api.rst}  |  490 ++--
>  ...hermal => x86_pkg_temperature_thermal.rst} |   28 +-
>  .../{this_cpu_ops.txt => this_cpu_ops.rst}    |    2 +
>  .../timers/{highres.txt => highres.rst}       |   13 +-
>  Documentation/timers/{hpet.txt => hpet.rst}   |    4 +-
>  .../timers/{hrtimers.txt => hrtimers.rst}     |    6 +-
>  Documentation/timers/index.rst                |   22 +
>  Documentation/timers/{NO_HZ.txt => no_hz.rst} |   40 +-
>  .../{timekeeping.txt => timekeeping.rst}      |    3 +-
>  .../{timers-howto.txt => timers-howto.rst}    |   15 +-
>  Documentation/trace/coresight-cpu-debug.txt   |    2 +-
>  Documentation/trace/ftrace.rst                |    1 +
>  Documentation/trace/histogram.rst             |   86 +-
>  Documentation/trace/kprobetrace.rst           |    2 +-
>  .../it_IT/kernel-hacking/hacking.rst          |    4 +-
>  .../it_IT/kernel-hacking/locking.rst          |    2 +-
>  .../translations/it_IT/process/4.Coding.rst   |    2 +-
>  .../it_IT/process/submit-checklist.rst        |    4 +-
>  .../translations/ko_KR/memory-barriers.txt    |    6 +-
>  Documentation/translations/zh_CN/IRQ.txt      |    4 +-
>  Documentation/translations/zh_CN/arm/Booting  |    4 +-
>  .../zh_CN/arm/kernel_user_helpers.txt         |    4 +-
>  .../translations/zh_CN/arm64/booting.txt      |    4 +-
>  .../zh_CN/arm64/legacy_instructions.txt       |    4 +-
>  .../translations/zh_CN/arm64/memory.txt       |    4 +-
>  .../zh_CN/arm64/silicon-errata.txt            |    4 +-
>  .../zh_CN/arm64/tagged-pointers.txt           |    4 +-
>  .../translations/zh_CN/filesystems/sysfs.txt  |    2 +-
>  .../translations/zh_CN/io_ordering.txt        |    4 +-
>  .../translations/zh_CN/oops-tracing.txt       |    2 +-
>  .../translations/zh_CN/process/4.Coding.rst   |    2 +-
>  .../zh_CN/process/coding-style.rst            |    2 +-
>  .../zh_CN/process/submit-checklist.rst        |    4 +-
>  .../zh_CN/process/submitting-drivers.rst      |    2 +-
>  ...access.txt => unaligned-memory-access.rst} |    2 +
>  ...ed-device.txt => vfio-mediated-device.rst} |    4 +-
>  Documentation/{vfio.txt => vfio.rst}          |    2 +
>  .../{video-output.txt => video-output.rst}    |    2 +
>  Documentation/virtual/kvm/api.txt             |    2 +-
>  Documentation/vm/numa.rst                     |    6 +-
>  Documentation/vm/page_migration.rst           |    2 +-
>  Documentation/vm/unevictable-lru.rst          |    4 +-
>  ....txt => convert_drivers_to_kernel_api.rst} |  109 +-
>  .../watchdog/{hpwdt.txt => hpwdt.rst}         |   27 +-
>  Documentation/watchdog/index.rst              |   25 +
>  .../watchdog/{mlx-wdt.txt => mlx-wdt.rst}     |   24 +-
>  .../{pcwd-watchdog.txt => pcwd-watchdog.rst}  |   13 +-
>  .../{watchdog-api.txt => watchdog-api.rst}    |   76 +-
>  ...kernel-api.txt => watchdog-kernel-api.rst} |   91 +-
>  .../watchdog/watchdog-parameters.rst          |  736 +++++
>  .../watchdog/watchdog-parameters.txt          |  410 ---
>  .../{watchdog-pm.txt => watchdog-pm.rst}      |    3 +
>  Documentation/watchdog/{wdt.txt => wdt.rst}   |   31 +-
>  Documentation/x86/topology.txt                |    2 +-
>  .../x86/x86_64/fake-numa-for-cpusets          |    4 +-
>  Documentation/xilinx/{eemi.txt => eemi.rst}   |    8 +-
>  Documentation/xilinx/index.rst                |   17 +
>  Documentation/{xillybus.txt => xillybus.rst}  |    2 +
>  .../xtensa/{atomctl.txt => atomctl.rst}       |   13 +-
>  .../xtensa/{booting.txt => booting.rst}       |    5 +-
>  Documentation/xtensa/index.rst                |   12 +
>  Documentation/xtensa/mmu.rst                  |  195 ++
>  Documentation/xtensa/mmu.txt                  |  189 --
>  Documentation/{xz.txt => xz.rst}              |    2 +
>  Documentation/{zorro.txt => zorro.rst}        |    2 +
>  Kconfig                                       |    2 +-
>  MAINTAINERS                                   |  132 +-
>  arch/Kconfig                                  |    4 +-
>  arch/arc/plat-eznps/Kconfig                   |    2 +-
>  arch/arm/Kconfig                              |    8 +-
>  arch/arm/common/mcpm_entry.c                  |    2 +-
>  arch/arm/common/mcpm_head.S                   |    2 +-
>  arch/arm/common/vlock.S                       |    2 +-
>  arch/arm/include/asm/setup.h                  |    2 +-
>  arch/arm/include/uapi/asm/setup.h             |    2 +-
>  arch/arm/kernel/entry-armv.S                  |    2 +-
>  arch/arm/mach-exynos/common.h                 |    2 +-
>  arch/arm/mach-ixp4xx/Kconfig                  |   14 +-
>  arch/arm/mach-s3c24xx/pm.c                    |    2 +-
>  arch/arm/mm/Kconfig                           |    4 +-
>  arch/arm/plat-samsung/Kconfig                 |    6 +-
>  arch/arm/tools/mach-types                     |    2 +-
>  arch/arm64/Kconfig                            |    2 +-
>  arch/arm64/include/asm/efi.h                  |    2 +-
>  arch/arm64/include/asm/image.h                |    2 +-
>  arch/arm64/include/uapi/asm/sigcontext.h      |    2 +-
>  arch/arm64/kernel/kexec_image.c               |    2 +-
>  arch/arm64/kernel/kuser32.S                   |    2 +-
>  arch/c6x/Kconfig                              |    2 +-
>  arch/ia64/hp/common/sba_iommu.c               |   12 +-
>  arch/ia64/kernel/efi.c                        |    2 +-
>  arch/ia64/kernel/fsys.S                       |    2 +-
>  arch/ia64/mm/ioremap.c                        |    2 +-
>  arch/ia64/pci/pci.c                           |    2 +-
>  arch/ia64/sn/pci/pci_dma.c                    |    4 +-
>  arch/m68k/q40/README                          |    2 +-
>  arch/microblaze/Kconfig.debug                 |    2 +-
>  arch/microblaze/Kconfig.platform              |    2 +-
>  arch/mips/bmips/setup.c                       |    2 +-
>  arch/nds32/Kconfig                            |    2 +-
>  arch/openrisc/Kconfig                         |    2 +-
>  arch/parisc/Kconfig                           |    2 +-
>  arch/parisc/kernel/pci-dma.c                  |    2 +-
>  arch/powerpc/kernel/exceptions-64s.S          |    2 +-
>  arch/powerpc/sysdev/Kconfig                   |    2 +-
>  arch/riscv/Kconfig                            |    2 +-
>  arch/s390/Kconfig                             |    4 +-
>  arch/s390/include/asm/debug.h                 |  235 +-
>  arch/sh/Kconfig                               |    4 +-
>  arch/sparc/Kconfig                            |    2 +-
>  arch/unicore32/include/asm/io.h               |    2 +-
>  arch/x86/Kconfig                              |   10 +-
>  arch/x86/include/asm/dma-mapping.h            |    4 +-
>  arch/x86/kernel/amd_gart_64.c                 |    2 +-
>  arch/xtensa/include/asm/initialize_mmu.h      |    2 +-
>  block/Kconfig                                 |    4 +-
>  block/Kconfig.iosched                         |    2 +-
>  block/bfq-iosched.c                           |    2 +-
>  block/blk-integrity.c                         |    2 +-
>  block/ioprio.c                                |    2 +-
>  block/mq-deadline.c                           |    2 +-
>  block/partitions/Kconfig                      |    2 +-
>  block/partitions/cmdline.c                    |    2 +-
>  drivers/auxdisplay/Kconfig                    |    2 +-
>  drivers/base/core.c                           |    2 +-
>  drivers/base/platform.c                       |    2 +-
>  drivers/block/Kconfig                         |   10 +-
>  drivers/block/floppy.c                        |    2 +-
>  drivers/block/zram/Kconfig                    |    6 +-
>  drivers/cdrom/cdrom.c                         |    2 +-
>  drivers/char/Kconfig                          |    6 +-
>  drivers/char/hw_random/core.c                 |    2 +-
>  drivers/char/ipmi/Kconfig                     |    2 +-
>  drivers/char/ipmi/ipmi_si_hotmod.c            |    2 +-
>  drivers/char/ipmi/ipmi_si_intf.c              |    2 +-
>  drivers/cpufreq/Kconfig.x86                   |    2 +-
>  drivers/crypto/sunxi-ss/sun4i-ss-cipher.c     |    2 +-
>  drivers/crypto/sunxi-ss/sun4i-ss-core.c       |    2 +-
>  drivers/crypto/sunxi-ss/sun4i-ss-hash.c       |    2 +-
>  drivers/crypto/sunxi-ss/sun4i-ss.h            |    2 +-
>  drivers/dma-buf/Kconfig                       |    2 +-
>  drivers/firmware/Kconfig                      |    2 +-
>  drivers/gpio/Kconfig                          |    2 +-
>  drivers/gpio/gpio-cs5535.c                    |    2 +-
>  drivers/gpu/drm/Kconfig                       |    2 +-
>  drivers/gpu/drm/drm_ioctl.c                   |    2 +-
>  drivers/gpu/drm/drm_modeset_lock.c            |    2 +-
>  drivers/gpu/drm/i915/i915_drv.h               |    2 +-
>  drivers/ide/Kconfig                           |   20 +-
>  drivers/ide/ide-cd.c                          |    2 +-
>  drivers/iio/Kconfig                           |    2 +-
>  drivers/infiniband/core/user_mad.c            |    2 +-
>  drivers/infiniband/ulp/ipoib/Kconfig          |    2 +-
>  drivers/input/touchscreen/sun4i-ts.c          |    2 +-
>  drivers/leds/trigger/Kconfig                  |    2 +-
>  drivers/leds/trigger/ledtrig-transient.c      |    2 +-
>  drivers/md/Kconfig                            |    2 +-
>  drivers/md/dm-init.c                          |    2 +-
>  drivers/md/dm-raid.c                          |    2 +-
>  drivers/media/usb/dvb-usb-v2/anysee.c         |    2 +-
>  drivers/misc/lkdtm/core.c                     |    2 +-
>  drivers/mtd/devices/Kconfig                   |    2 +-
>  drivers/mtd/nand/raw/nand_ecc.c               |    2 +-
>  drivers/net/ethernet/intel/ice/ice_main.c     |    2 +-
>  drivers/net/ethernet/smsc/Kconfig             |    6 +-
>  drivers/net/wireless/intel/iwlegacy/Kconfig   |    4 +-
>  drivers/net/wireless/intel/iwlwifi/Kconfig    |    2 +-
>  drivers/nvdimm/Kconfig                        |    2 +-
>  drivers/opp/Kconfig                           |    2 +-
>  drivers/parisc/sba_iommu.c                    |   16 +-
>  drivers/parport/Kconfig                       |    2 +-
>  drivers/pci/switch/Kconfig                    |    2 +-
>  drivers/pcmcia/ds.c                           |    2 +-
>  drivers/perf/qcom_l3_pmu.c                    |    2 +-
>  drivers/platform/x86/Kconfig                  |    8 +-
>  drivers/platform/x86/dcdbas.c                 |    2 +-
>  drivers/platform/x86/dell_rbu.c               |    2 +-
>  drivers/pnp/isapnp/Kconfig                    |    2 +-
>  drivers/power/supply/power_supply_core.c      |    2 +-
>  drivers/rapidio/Kconfig                       |    2 +-
>  drivers/regulator/core.c                      |    2 +-
>  drivers/s390/char/zcore.c                     |    2 +-
>  drivers/sbus/char/oradax.c                    |    2 +-
>  drivers/scsi/Kconfig                          |    4 +-
>  drivers/soc/fsl/qe/qe.c                       |    2 +-
>  drivers/staging/sm750fb/Kconfig               |    2 +-
>  drivers/tty/Kconfig                           |    8 +-
>  drivers/tty/hvc/hvcs.c                        |    2 +-
>  drivers/tty/serial/Kconfig                    |    2 +-
>  drivers/tty/serial/ucc_uart.c                 |    2 +-
>  drivers/usb/misc/Kconfig                      |    4 +-
>  drivers/vfio/Kconfig                          |    2 +-
>  drivers/vfio/mdev/Kconfig                     |    2 +-
>  drivers/video/fbdev/Kconfig                   |   38 +-
>  drivers/video/fbdev/matrox/matroxfb_base.c    |    2 +-
>  drivers/video/fbdev/pxafb.c                   |    2 +-
>  drivers/video/fbdev/sh7760fb.c                |    2 +-
>  drivers/w1/Kconfig                            |    2 +-
>  drivers/watchdog/Kconfig                      |    6 +-
>  drivers/watchdog/smsc37b787_wdt.c             |    2 +-
>  include/asm-generic/bitops/atomic.h           |    2 +-
>  include/linux/cgroup-defs.h                   |    2 +-
>  include/linux/connector.h                     |   63 +-
>  include/linux/dma-mapping.h                   |    2 +-
>  include/linux/fault-inject.h                  |    2 +-
>  include/linux/hw_random.h                     |    2 +-
>  include/linux/interrupt.h                     |    2 +-
>  include/linux/io-mapping.h                    |    2 +-
>  include/linux/iopoll.h                        |    4 +-
>  include/linux/jump_label.h                    |    2 +-
>  include/linux/kobject.h                       |    2 +-
>  include/linux/kobject_ns.h                    |    2 +-
>  include/linux/lockdep.h                       |    2 +-
>  include/linux/mutex.h                         |    2 +-
>  include/linux/pm.h                            |    2 +-
>  include/linux/rbtree.h                        |    2 +-
>  include/linux/rbtree_augmented.h              |    2 +-
>  include/linux/regmap.h                        |    4 +-
>  include/linux/rwsem.h                         |    2 +-
>  include/linux/serial_core.h                   |    2 +-
>  include/linux/thermal.h                       |    4 +-
>  include/media/videobuf-dma-sg.h               |    2 +-
>  include/pcmcia/ds.h                           |    2 +-
>  include/pcmcia/ss.h                           |    2 +-
>  include/soc/fsl/qe/qe.h                       |    2 +-
>  include/uapi/linux/bpf.h                      |    2 +-
>  include/uapi/rdma/rdma_user_ioctl_cmds.h      |    2 +-
>  init/Kconfig                                  |   12 +-
>  kernel/cgroup/cpuset.c                        |    2 +-
>  kernel/dma/debug.c                            |    2 +-
>  kernel/locking/mutex.c                        |    2 +-
>  kernel/locking/rtmutex.c                      |    2 +-
>  kernel/padata.c                               |    2 +-
>  kernel/panic.c                                |    2 +-
>  kernel/power/Kconfig                          |    6 +-
>  kernel/sched/deadline.c                       |    2 +-
>  lib/Kconfig                                   |    2 +-
>  lib/Kconfig.debug                             |    8 +-
>  lib/crc32.c                                   |    2 +-
>  lib/kobject.c                                 |    4 +-
>  lib/lzo/lzo1x_decompress_safe.c               |    2 +-
>  lib/xz/Kconfig                                |    2 +-
>  mm/Kconfig                                    |    2 +-
>  mm/nommu.c                                    |    2 +-
>  mm/swap.c                                     |    2 +-
>  net/bridge/netfilter/Kconfig                  |    2 +-
>  net/ipv4/netfilter/Kconfig                    |    2 +-
>  net/ipv6/netfilter/Kconfig                    |    2 +-
>  net/netfilter/Kconfig                         |   18 +-
>  net/tipc/Kconfig                              |    2 +-
>  net/wireless/Kconfig                          |    2 +-
>  samples/Kconfig                               |    2 +-
>  samples/kprobes/kprobe_example.c              |    2 +-
>  samples/kprobes/kretprobe_example.c           |    2 +-
>  scripts/Kbuild.include                        |    4 +-
>  scripts/Makefile.host                         |    2 +-
>  scripts/checkpatch.pl                         |    8 +-
>  scripts/coccinelle/free/devm_free.cocci       |    2 +-
>  scripts/documentation-file-ref-check          |    5 +-
>  scripts/gcc-plugins/Kconfig                   |    2 +-
>  scripts/kconfig/symbol.c                      |    2 +-
>  .../tests/err_recursive_dep/expected_stderr   |   14 +-
>  security/Kconfig                              |    2 +-
>  security/device_cgroup.c                      |    2 +-
>  sound/oss/dmasound/Kconfig                    |    6 +-
>  tools/include/linux/rbtree.h                  |    2 +-
>  tools/include/linux/rbtree_augmented.h        |    2 +-
>  tools/include/uapi/linux/bpf.h                |    2 +-
>  .../Documentation/stack-validation.txt        |    2 +-
>  tools/testing/fault-injection/failcmd.sh      |    2 +-
>  tools/testing/selftests/zram/README           |    2 +-
>  usr/Kconfig                                   |    2 +-
>  961 files changed, 31818 insertions(+), 24040 deletions(-)
>  rename Documentation/{DMA-API-HOWTO.txt => DMA-API-HOWTO.rst} (99%)
>  rename Documentation/{DMA-API.txt => DMA-API.rst} (99%)
>  rename Documentation/{DMA-ISA-LPC.txt => DMA-ISA-LPC.rst} (98%)
>  rename Documentation/{DMA-attributes.txt => DMA-attributes.rst} (99%)
>  rename Documentation/EDID/{HOWTO.txt => howto.rst} (83%)
>  rename Documentation/{IPMI.txt => IPMI.rst} (99%)
>  rename Documentation/{IRQ-affinity.txt => IRQ-affinity.rst} (99%)
>  rename Documentation/{IRQ-domain.txt => IRQ-domain.rst} (99%)
>  rename Documentation/{IRQ.txt => IRQ.rst} (99%)
>  rename Documentation/{Intel-IOMMU.txt => Intel-IOMMU.rst} (99%)
>  rename Documentation/{SAK.txt => SAK.rst} (99%)
>  rename Documentation/{SM501.txt => SM501.rst} (99%)
>  rename Documentation/accounting/{cgroupstats.txt => cgroupstats.rst} (77%)
>  rename Documentation/accounting/{delay-accounting.txt => delay-accounting.rst} (77%)
>  create mode 100644 Documentation/accounting/index.rst
>  rename Documentation/accounting/{psi.txt => psi.rst} (91%)
>  rename Documentation/accounting/{taskstats-struct.txt => taskstats-struct.rst} (90%)
>  rename Documentation/accounting/{taskstats.txt => taskstats.rst} (95%)
>  rename Documentation/aoe/{aoe.txt => aoe.rst} (79%)
>  create mode 100644 Documentation/aoe/examples.rst
>  create mode 100644 Documentation/aoe/index.rst
>  rename Documentation/aoe/{todo.txt => todo.rst} (98%)
>  delete mode 100644 Documentation/arm/Marvell/README
>  delete mode 100644 Documentation/arm/Netwinder
>  delete mode 100644 Documentation/arm/SA1100/FreeBird
>  delete mode 100644 Documentation/arm/SA1100/empeg
>  delete mode 100644 Documentation/arm/SA1100/serial_UART
>  rename Documentation/arm/{README => arm.rst} (88%)
>  rename Documentation/arm/{Booting => booting.rst} (89%)
>  rename Documentation/arm/{cluster-pm-race-avoidance.txt => cluster-pm-race-avoidance.rst} (84%)
>  rename Documentation/arm/{firmware.txt => firmware.rst} (86%)
>  create mode 100644 Documentation/arm/index.rst
>  rename Documentation/arm/{Interrupts => interrupts.rst} (81%)
>  rename Documentation/arm/{IXP4xx => ixp4xx.rst} (84%)
>  rename Documentation/arm/{kernel_mode_neon.txt => kernel_mode_neon.rst} (99%)
>  rename Documentation/arm/{kernel_user_helpers.txt => kernel_user_helpers.rst} (78%)
>  rename Documentation/arm/keystone/{knav-qmss.txt => knav-qmss.rst} (92%)
>  rename Documentation/arm/keystone/{Overview.txt => overview.rst} (59%)
>  create mode 100644 Documentation/arm/marvel.rst
>  rename Documentation/arm/{mem_alignment => mem_alignment.rst} (89%)
>  rename Documentation/arm/{memory.txt => memory.rst} (90%)
>  rename Documentation/arm/{Microchip/README => microchip.rst} (92%)
>  create mode 100644 Documentation/arm/netwinder.rst
>  create mode 100644 Documentation/arm/nwfpe/index.rst
>  rename Documentation/arm/nwfpe/{README.FPE => netwinder-fpe.rst} (94%)
>  rename Documentation/arm/nwfpe/{NOTES => notes.rst} (99%)
>  rename Documentation/arm/nwfpe/{README => nwfpe.rst} (98%)
>  rename Documentation/arm/nwfpe/{TODO => todo.rst} (75%)
>  rename Documentation/arm/{OMAP/DSS => omap/dss.rst} (86%)
>  create mode 100644 Documentation/arm/omap/index.rst
>  rename Documentation/arm/{OMAP/README => omap/omap.rst} (62%)
>  rename Documentation/arm/{OMAP/omap_pm => omap/omap_pm.rst} (83%)
>  rename Documentation/arm/{Porting => porting.rst} (94%)
>  rename Documentation/arm/pxa/{mfp.txt => mfp.rst} (83%)
>  rename Documentation/arm/{SA1100/ADSBitsy => sa1100/adsbitsy.rst} (90%)
>  rename Documentation/arm/{SA1100/Assabet => sa1100/assabet.rst} (62%)
>  rename Documentation/arm/{SA1100/Brutus => sa1100/brutus.rst} (75%)
>  rename Documentation/arm/{SA1100/CERF => sa1100/cerf.rst} (91%)
>  create mode 100644 Documentation/arm/sa1100/freebird.rst
>  rename Documentation/arm/{SA1100/GraphicsClient => sa1100/graphicsclient.rst} (87%)
>  rename Documentation/arm/{SA1100/GraphicsMaster => sa1100/graphicsmaster.rst} (92%)
>  rename Documentation/arm/{SA1100/HUW_WEBPANEL => sa1100/huw_webpanel.rst} (78%)
>  create mode 100644 Documentation/arm/sa1100/index.rst
>  rename Documentation/arm/{SA1100/Itsy => sa1100/itsy.rst} (88%)
>  rename Documentation/arm/{SA1100/LART => sa1100/lart.rst} (90%)
>  rename Documentation/arm/{SA1100/nanoEngine => sa1100/nanoengine.rst} (74%)
>  rename Documentation/arm/{SA1100/Pangolin => sa1100/pangolin.rst} (81%)
>  rename Documentation/arm/{SA1100/PLEB => sa1100/pleb.rst} (95%)
>  create mode 100644 Documentation/arm/sa1100/serial_uart.rst
>  rename Documentation/arm/{SA1100/Tifon => sa1100/tifon.rst} (88%)
>  rename Documentation/arm/{SA1100/Yopy => sa1100/yopy.rst} (74%)
>  rename Documentation/arm/{Samsung-S3C24XX/CPUfreq.txt => samsung-s3c24xx/cpufreq.rst} (96%)
>  rename Documentation/arm/{Samsung-S3C24XX/EB2410ITX.txt => samsung-s3c24xx/eb2410itx.rst} (92%)
>  rename Documentation/arm/{Samsung-S3C24XX/GPIO.txt => samsung-s3c24xx/gpio.rst} (89%)
>  rename Documentation/arm/{Samsung-S3C24XX/H1940.txt => samsung-s3c24xx/h1940.rst} (94%)
>  create mode 100644 Documentation/arm/samsung-s3c24xx/index.rst
>  rename Documentation/arm/{Samsung-S3C24XX/NAND.txt => samsung-s3c24xx/nand.rst} (92%)
>  rename Documentation/arm/{Samsung-S3C24XX/Overview.txt => samsung-s3c24xx/overview.rst} (94%)
>  rename Documentation/arm/{Samsung-S3C24XX/S3C2412.txt => samsung-s3c24xx/s3c2412.rst} (96%)
>  rename Documentation/arm/{Samsung-S3C24XX/S3C2413.txt => samsung-s3c24xx/s3c2413.rst} (77%)
>  rename Documentation/arm/{Samsung-S3C24XX/SMDK2440.txt => samsung-s3c24xx/smdk2440.rst} (94%)
>  rename Documentation/arm/{Samsung-S3C24XX/Suspend.txt => samsung-s3c24xx/suspend.rst} (94%)
>  rename Documentation/arm/{Samsung-S3C24XX/USB-Host.txt => samsung-s3c24xx/usb-host.rst} (94%)
>  rename Documentation/arm/{Samsung/Bootloader-interface.txt => samsung/bootloader-interface.rst} (72%)
>  rename Documentation/arm/{Samsung => samsung}/clksrc-change-registers.awk (100%)
>  rename Documentation/arm/{Samsung/GPIO.txt => samsung/gpio.rst} (87%)
>  create mode 100644 Documentation/arm/samsung/index.rst
>  rename Documentation/arm/{Samsung/Overview.txt => samsung/overview.rst} (86%)
>  rename Documentation/arm/{Setup => setup.rst} (87%)
>  rename Documentation/arm/{SH-Mobile => sh-mobile}/.gitignore (100%)
>  rename Documentation/arm/{SPEAr/overview.txt => spear/overview.rst} (91%)
>  rename Documentation/arm/sti/{overview.txt => overview.rst} (82%)
>  rename Documentation/arm/sti/{stih407-overview.txt => stih407-overview.rst} (82%)
>  rename Documentation/arm/sti/{stih415-overview.txt => stih415-overview.rst} (79%)
>  rename Documentation/arm/sti/{stih416-overview.txt => stih416-overview.rst} (83%)
>  rename Documentation/arm/sti/{stih418-overview.txt => stih418-overview.rst} (83%)
>  rename Documentation/arm/{sunxi/README => sunxi.rst} (83%)
>  rename Documentation/arm/sunxi/{clocks.txt => clocks.rst} (92%)
>  rename Documentation/arm/{swp_emulation => swp_emulation.rst} (63%)
>  rename Documentation/arm/{tcm.txt => tcm.rst} (86%)
>  rename Documentation/arm/{uefi.txt => uefi.rst} (63%)
>  rename Documentation/arm/{VFP/release-notes.txt => vfp/release-notes.rst} (92%)
>  rename Documentation/arm/{vlocks.txt => vlocks.rst} (98%)
>  rename Documentation/arm64/{acpi_object_usage.txt => acpi_object_usage.rst} (84%)
>  rename Documentation/arm64/{arm-acpi.txt => arm-acpi.rst} (86%)
>  rename Documentation/arm64/{booting.txt => booting.rst} (86%)
>  rename Documentation/arm64/{cpu-feature-registers.txt => cpu-feature-registers.rst} (66%)
>  rename Documentation/arm64/{elf_hwcaps.txt => elf_hwcaps.rst} (92%)
>  rename Documentation/arm64/{hugetlbpage.txt => hugetlbpage.rst} (86%)
>  create mode 100644 Documentation/arm64/index.rst
>  rename Documentation/arm64/{legacy_instructions.txt => legacy_instructions.rst} (73%)
>  create mode 100644 Documentation/arm64/memory.rst
>  delete mode 100644 Documentation/arm64/memory.txt
>  rename Documentation/arm64/{pointer-authentication.txt => pointer-authentication.rst} (98%)
>  rename Documentation/arm64/{silicon-errata.txt => silicon-errata.rst} (55%)
>  rename Documentation/arm64/{sve.txt => sve.rst} (98%)
>  rename Documentation/arm64/{tagged-pointers.txt => tagged-pointers.rst} (94%)
>  rename Documentation/{atomic_bitops.txt => atomic_bitops.rst} (99%)
>  rename Documentation/auxdisplay/{lcd-panel-cgram.txt => lcd-panel-cgram.rst} (88%)
>  create mode 100644 Documentation/backlight/lp855x-driver.rst
>  delete mode 100644 Documentation/backlight/lp855x-driver.txt
>  rename Documentation/block/{bfq-iosched.txt => bfq-iosched.rst} (95%)
>  rename Documentation/block/{biodoc.txt => biodoc.rst} (83%)
>  rename Documentation/block/{biovecs.txt => biovecs.rst} (92%)
>  create mode 100644 Documentation/block/capability.rst
>  delete mode 100644 Documentation/block/capability.txt
>  rename Documentation/block/{cmdline-partition.txt => cmdline-partition.rst} (92%)
>  rename Documentation/block/{data-integrity.txt => data-integrity.rst} (92%)
>  rename Documentation/block/{deadline-iosched.txt => deadline-iosched.rst} (89%)
>  create mode 100644 Documentation/block/index.rst
>  rename Documentation/block/{ioprio.txt => ioprio.rst} (75%)
>  rename Documentation/block/{kyber-iosched.txt => kyber-iosched.rst} (86%)
>  rename Documentation/block/{null_blk.txt => null_blk.rst} (60%)
>  rename Documentation/block/{pr.txt => pr.rst} (95%)
>  rename Documentation/block/{queue-sysfs.txt => queue-sysfs.rst} (99%)
>  rename Documentation/block/{request.txt => request.rst} (59%)
>  rename Documentation/block/{stat.txt => stat.rst} (89%)
>  rename Documentation/block/{switching-sched.txt => switching-sched.rst} (71%)
>  rename Documentation/block/{writeback_cache_control.txt => writeback_cache_control.rst} (94%)
>  rename Documentation/blockdev/drbd/{data-structure-v9.txt => data-structure-v9.rst} (94%)
>  create mode 100644 Documentation/blockdev/drbd/figures.rst
>  rename Documentation/blockdev/drbd/{README.txt => index.rst} (55%)
>  rename Documentation/blockdev/{floppy.txt => floppy.rst} (81%)
>  create mode 100644 Documentation/blockdev/index.rst
>  rename Documentation/blockdev/{nbd.txt => nbd.rst} (96%)
>  rename Documentation/blockdev/{paride.txt => paride.rst} (85%)
>  rename Documentation/blockdev/{ramdisk.txt => ramdisk.rst} (84%)
>  rename Documentation/blockdev/{zram.txt => zram.rst} (76%)
>  rename Documentation/{bt8xxgpio.txt => bt8xxgpio.rst} (99%)
>  rename Documentation/{btmrvl.txt => btmrvl.rst} (99%)
>  rename Documentation/bus-devices/{ti-gpmc.txt => ti-gpmc.rst} (58%)
>  rename Documentation/{bus-virt-phys-mapping.txt => bus-virt-phys-mapping.rst} (99%)
>  delete mode 100644 Documentation/cdrom/Makefile
>  create mode 100644 Documentation/cdrom/cdrom-standard.rst
>  delete mode 100644 Documentation/cdrom/cdrom-standard.tex
>  rename Documentation/cdrom/{ide-cd => ide-cd.rst} (82%)
>  create mode 100644 Documentation/cdrom/index.rst
>  rename Documentation/cdrom/{packet-writing.txt => packet-writing.rst} (91%)
>  rename Documentation/cgroup-v1/{blkio-controller.txt => blkio-controller.rst} (89%)
>  rename Documentation/cgroup-v1/{cgroups.txt => cgroups.rst} (88%)
>  rename Documentation/cgroup-v1/{cpuacct.txt => cpuacct.rst} (90%)
>  rename Documentation/cgroup-v1/{cpusets.txt => cpusets.rst} (90%)
>  rename Documentation/cgroup-v1/{devices.txt => devices.rst} (88%)
>  rename Documentation/cgroup-v1/{freezer-subsystem.txt => freezer-subsystem.rst} (95%)
>  rename Documentation/cgroup-v1/{hugetlb.txt => hugetlb.rst} (74%)
>  create mode 100644 Documentation/cgroup-v1/index.rst
>  rename Documentation/cgroup-v1/{memcg_test.txt => memcg_test.rst} (62%)
>  rename Documentation/cgroup-v1/{memory.txt => memory.rst} (71%)
>  rename Documentation/cgroup-v1/{net_cls.txt => net_cls.rst} (50%)
>  rename Documentation/cgroup-v1/{net_prio.txt => net_prio.rst} (71%)
>  rename Documentation/cgroup-v1/{pids.txt => pids.rst} (62%)
>  rename Documentation/cgroup-v1/{rdma.txt => rdma.rst} (79%)
>  rename Documentation/{clearing-warn-once.txt => clearing-warn-once.rst} (96%)
>  rename Documentation/cma/{debugfs.txt => debugfs.rst} (91%)
>  rename Documentation/connector/{connector.txt => connector.rst} (57%)
>  rename Documentation/console/{console.txt => console.rst} (80%)
>  rename Documentation/cpu-freq/{amd-powernow.txt => amd-powernow.rst} (91%)
>  rename Documentation/cpu-freq/{core.txt => core.rst} (66%)
>  rename Documentation/cpu-freq/{cpu-drivers.txt => cpu-drivers.rst} (57%)
>  rename Documentation/cpu-freq/{cpufreq-nforce2.txt => cpufreq-nforce2.rst} (65%)
>  create mode 100644 Documentation/cpu-freq/cpufreq-stats.rst
>  delete mode 100644 Documentation/cpu-freq/cpufreq-stats.txt
>  create mode 100644 Documentation/cpu-freq/index.rst
>  delete mode 100644 Documentation/cpu-freq/index.txt
>  rename Documentation/cpu-freq/{pcc-cpufreq.txt => pcc-cpufreq.rst} (80%)
>  rename Documentation/{cpu-load.txt => cpu-load.rst} (99%)
>  rename Documentation/{cputopology.txt => cputopology.rst} (99%)
>  rename Documentation/{crc32.txt => crc32.rst} (99%)
>  rename Documentation/{dcdbas.txt => dcdbas.rst} (99%)
>  rename Documentation/{debugging-modules.txt => debugging-modules.rst} (98%)
>  rename Documentation/{debugging-via-ohci1394.txt => debugging-via-ohci1394.rst} (99%)
>  rename Documentation/{dell_rbu.txt => dell_rbu.rst} (99%)
>  rename Documentation/device-mapper/{cache-policies.txt => cache-policies.rst} (94%)
>  rename Documentation/device-mapper/{cache.txt => cache.rst} (61%)
>  rename Documentation/device-mapper/{delay.txt => delay.rst} (53%)
>  rename Documentation/device-mapper/{dm-crypt.txt => dm-crypt.rst} (87%)
>  rename Documentation/device-mapper/{dm-flakey.txt => dm-flakey.rst} (60%)
>  rename Documentation/device-mapper/{dm-init.txt => dm-init.rst} (68%)
>  rename Documentation/device-mapper/{dm-integrity.txt => dm-integrity.rst} (90%)
>  rename Documentation/device-mapper/{dm-io.txt => dm-io.rst} (92%)
>  rename Documentation/device-mapper/{dm-log.txt => dm-log.rst} (90%)
>  rename Documentation/device-mapper/{dm-queue-length.txt => dm-queue-length.rst} (76%)
>  rename Documentation/device-mapper/{dm-raid.txt => dm-raid.rst} (71%)
>  rename Documentation/device-mapper/{dm-service-time.txt => dm-service-time.rst} (60%)
>  create mode 100644 Documentation/device-mapper/dm-uevent.rst
>  delete mode 100644 Documentation/device-mapper/dm-uevent.txt
>  rename Documentation/device-mapper/{dm-zoned.txt => dm-zoned.rst} (97%)
>  rename Documentation/device-mapper/{era.txt => era.rst} (70%)
>  create mode 100644 Documentation/device-mapper/index.rst
>  rename Documentation/device-mapper/{kcopyd.txt => kcopyd.rst} (93%)
>  create mode 100644 Documentation/device-mapper/linear.rst
>  delete mode 100644 Documentation/device-mapper/linear.txt
>  rename Documentation/device-mapper/{log-writes.txt => log-writes.rst} (61%)
>  rename Documentation/device-mapper/{persistent-data.txt => persistent-data.rst} (98%)
>  rename Documentation/device-mapper/{snapshot.txt => snapshot.rst} (62%)
>  rename Documentation/device-mapper/{statistics.txt => statistics.rst} (86%)
>  create mode 100644 Documentation/device-mapper/striped.rst
>  delete mode 100644 Documentation/device-mapper/striped.txt
>  rename Documentation/device-mapper/{switch.txt => switch.rst} (84%)
>  rename Documentation/device-mapper/{thin-provisioning.txt => thin-provisioning.rst} (92%)
>  rename Documentation/device-mapper/{unstriped.txt => unstriped.rst} (60%)
>  rename Documentation/device-mapper/{verity.txt => verity.rst} (98%)
>  rename Documentation/device-mapper/{writecache.txt => writecache.rst} (96%)
>  rename Documentation/device-mapper/{zero.txt => zero.rst} (83%)
>  rename Documentation/{digsig.txt => digsig.rst} (99%)
>  rename Documentation/{pps/pps.txt => driver-api/pps.rst} (89%)
>  rename Documentation/{ptp/ptp.txt => driver-api/ptp.rst} (88%)
>  rename Documentation/driver-model/{binding.txt => binding.rst} (92%)
>  rename Documentation/driver-model/{bus.txt => bus.rst} (76%)
>  rename Documentation/driver-model/{class.txt => class.rst} (75%)
>  rename Documentation/driver-model/{design-patterns.txt => design-patterns.rst} (59%)
>  rename Documentation/driver-model/{device.txt => device.rst} (69%)
>  rename Documentation/driver-model/{devres.txt => devres.rst} (93%)
>  rename Documentation/driver-model/{driver.txt => driver.rst} (75%)
>  create mode 100644 Documentation/driver-model/index.rst
>  rename Documentation/driver-model/{overview.txt => overview.rst} (90%)
>  rename Documentation/driver-model/{platform.txt => platform.rst} (95%)
>  rename Documentation/driver-model/{porting.txt => porting.rst} (62%)
>  rename Documentation/early-userspace/{buffer-format.txt => buffer-format.rst} (91%)
>  rename Documentation/early-userspace/{README => early_userspace_support.rst} (99%)
>  create mode 100644 Documentation/early-userspace/index.rst
>  rename Documentation/{efi-stub.txt => efi-stub.rst} (99%)
>  rename Documentation/{eisa.txt => eisa.rst} (98%)
>  rename Documentation/fault-injection/{fault-injection.txt => fault-injection.rst} (68%)
>  create mode 100644 Documentation/fault-injection/index.rst
>  rename Documentation/fault-injection/{notifier-error-inject.txt => notifier-error-inject.rst} (83%)
>  create mode 100644 Documentation/fault-injection/nvme-fault-injection.rst
>  delete mode 100644 Documentation/fault-injection/nvme-fault-injection.txt
>  create mode 100644 Documentation/fault-injection/provoke-crashes.rst
>  delete mode 100644 Documentation/fault-injection/provoke-crashes.txt
>  rename Documentation/fb/{api.txt => api.rst} (97%)
>  rename Documentation/fb/{arkfb.txt => arkfb.rst} (92%)
>  rename Documentation/fb/{aty128fb.txt => aty128fb.rst} (61%)
>  rename Documentation/fb/{cirrusfb.txt => cirrusfb.rst} (75%)
>  rename Documentation/fb/{cmap_xfbdev.txt => cmap_xfbdev.rst} (50%)
>  rename Documentation/fb/{deferred_io.txt => deferred_io.rst} (86%)
>  rename Documentation/fb/{efifb.txt => efifb.rst} (75%)
>  rename Documentation/fb/{ep93xx-fb.txt => ep93xx-fb.rst} (85%)
>  rename Documentation/fb/{fbcon.txt => fbcon.rst} (68%)
>  rename Documentation/fb/{framebuffer.txt => framebuffer.rst} (92%)
>  rename Documentation/fb/{gxfb.txt => gxfb.rst} (60%)
>  create mode 100644 Documentation/fb/index.rst
>  rename Documentation/fb/{intel810.txt => intel810.rst} (83%)
>  rename Documentation/fb/{intelfb.txt => intelfb.rst} (73%)
>  rename Documentation/fb/{internals.txt => internals.rst} (82%)
>  rename Documentation/fb/{lxfb.txt => lxfb.rst} (60%)
>  create mode 100644 Documentation/fb/matroxfb.rst
>  delete mode 100644 Documentation/fb/matroxfb.txt
>  rename Documentation/fb/{metronomefb.txt => metronomefb.rst} (98%)
>  rename Documentation/fb/{modedb.txt => modedb.rst} (87%)
>  create mode 100644 Documentation/fb/pvr2fb.rst
>  delete mode 100644 Documentation/fb/pvr2fb.txt
>  rename Documentation/fb/{pxafb.txt => pxafb.rst} (78%)
>  rename Documentation/fb/{s3fb.txt => s3fb.rst} (94%)
>  rename Documentation/fb/{sa1100fb.txt => sa1100fb.rst} (64%)
>  create mode 100644 Documentation/fb/sh7760fb.rst
>  delete mode 100644 Documentation/fb/sh7760fb.txt
>  rename Documentation/fb/{sisfb.txt => sisfb.rst} (85%)
>  rename Documentation/fb/{sm501.txt => sm501.rst} (65%)
>  rename Documentation/fb/{sm712fb.txt => sm712fb.rst} (59%)
>  create mode 100644 Documentation/fb/sstfb.rst
>  delete mode 100644 Documentation/fb/sstfb.txt
>  rename Documentation/fb/{tgafb.txt => tgafb.rst} (71%)
>  rename Documentation/fb/{tridentfb.txt => tridentfb.rst} (70%)
>  rename Documentation/fb/{udlfb.txt => udlfb.rst} (77%)
>  rename Documentation/fb/{uvesafb.txt => uvesafb.rst} (52%)
>  rename Documentation/fb/{vesafb.txt => vesafb.rst} (56%)
>  create mode 100644 Documentation/fb/viafb.rst
>  delete mode 100644 Documentation/fb/viafb.txt
>  rename Documentation/fb/{vt8623fb.txt => vt8623fb.rst} (85%)
>  rename Documentation/fmc/{API.txt => api.rst} (87%)
>  rename Documentation/fmc/{carrier.txt => carrier.rst} (91%)
>  rename Documentation/fmc/{FMC-and-SDB.txt => fmc-and-sdb.rst} (88%)
>  rename Documentation/fmc/{fmc-chardev.txt => fmc-chardev.rst} (96%)
>  rename Documentation/fmc/{fmc-fakedev.txt => fmc-fakedev.rst} (85%)
>  rename Documentation/fmc/{fmc-trivial.txt => fmc-trivial.rst} (69%)
>  rename Documentation/fmc/{fmc-write-eeprom.txt => fmc-write-eeprom.rst} (79%)
>  rename Documentation/fmc/{identifiers.txt => identifiers.rst} (93%)
>  create mode 100644 Documentation/fmc/index.rst
>  rename Documentation/fmc/{mezzanine.txt => mezzanine.rst} (87%)
>  rename Documentation/fmc/{parameters.txt => parameters.rst} (96%)
>  rename Documentation/fpga/{dfl.txt => dfl.rst} (89%)
>  create mode 100644 Documentation/fpga/index.rst
>  rename Documentation/{futex-requeue-pi.txt => futex-requeue-pi.rst} (99%)
>  rename Documentation/{gcc-plugins.txt => gcc-plugins.rst} (99%)
>  create mode 100644 Documentation/gpio/index.rst
>  rename Documentation/gpio/{sysfs.txt => sysfs.rst} (86%)
>  rename Documentation/hid/{hid-alps.txt => hid-alps.rst} (64%)
>  rename Documentation/hid/{hid-sensor.txt => hid-sensor.rst} (61%)
>  rename Documentation/hid/{hid-transport.txt => hid-transport.rst} (93%)
>  rename Documentation/hid/{hiddev.txt => hiddev.rst} (80%)
>  rename Documentation/hid/{hidraw.txt => hidraw.rst} (89%)
>  create mode 100644 Documentation/hid/index.rst
>  create mode 100644 Documentation/hid/intel-ish-hid.rst
>  delete mode 100644 Documentation/hid/intel-ish-hid.txt
>  rename Documentation/hid/{uhid.txt => uhid.rst} (94%)
>  rename Documentation/{highuid.txt => highuid.rst} (99%)
>  rename Documentation/{hw_random.txt => hw_random.rst} (99%)
>  rename Documentation/{hwspinlock.txt => hwspinlock.rst} (99%)
>  rename Documentation/ia64/{aliasing.txt => aliasing.rst} (84%)
>  rename Documentation/ia64/{efirtc.txt => efirtc.rst} (76%)
>  rename Documentation/ia64/{err_inject.txt => err_inject.rst} (82%)
>  rename Documentation/ia64/{fsys.txt => fsys.rst} (76%)
>  rename Documentation/ia64/{README => ia64.rst} (61%)
>  create mode 100644 Documentation/ia64/index.rst
>  rename Documentation/ia64/{IRQ-redir.txt => irq-redir.rst} (84%)
>  rename Documentation/ia64/{mca.txt => mca.rst} (96%)
>  rename Documentation/ia64/{serial.txt => serial.rst} (87%)
>  create mode 100644 Documentation/ia64/xen.rst
>  delete mode 100644 Documentation/ia64/xen.txt
>  create mode 100644 Documentation/ide/changelogs.rst
>  rename Documentation/ide/{ide-tape.txt => ide-tape.rst} (83%)
>  rename Documentation/ide/{ide.txt => ide.rst} (72%)
>  create mode 100644 Documentation/ide/index.rst
>  rename Documentation/ide/{warm-plug-howto.txt => warm-plug-howto.rst} (61%)
>  rename Documentation/iio/{ep93xx_adc.txt => ep93xx_adc.rst} (71%)
>  rename Documentation/iio/{iio_configfs.txt => iio_configfs.rst} (73%)
>  create mode 100644 Documentation/iio/index.rst
>  rename Documentation/infiniband/{core_locking.txt => core_locking.rst} (78%)
>  create mode 100644 Documentation/infiniband/index.rst
>  rename Documentation/infiniband/{ipoib.txt => ipoib.rst} (90%)
>  rename Documentation/infiniband/{opa_vnic.txt => opa_vnic.rst} (63%)
>  rename Documentation/infiniband/{sysfs.txt => sysfs.rst} (69%)
>  rename Documentation/infiniband/{tag_matching.txt => tag_matching.rst} (98%)
>  rename Documentation/infiniband/{user_mad.txt => user_mad.rst} (90%)
>  rename Documentation/infiniband/{user_verbs.txt => user_verbs.rst} (93%)
>  rename Documentation/{intel_txt.txt => intel_txt.rst} (99%)
>  rename Documentation/{io-mapping.txt => io-mapping.rst} (99%)
>  rename Documentation/{io_ordering.txt => io_ordering.rst} (99%)
>  rename Documentation/ioctl/{botching-up-ioctls.txt => botching-up-ioctls.rst} (99%)
>  create mode 100644 Documentation/ioctl/cdrom.rst
>  delete mode 100644 Documentation/ioctl/cdrom.txt
>  rename Documentation/ioctl/{hdio.txt => hdio.rst} (54%)
>  create mode 100644 Documentation/ioctl/index.rst
>  rename Documentation/ioctl/{ioctl-decoding.txt => ioctl-decoding.rst} (54%)
>  create mode 100644 Documentation/ioctl/ioctl-number.rst
>  delete mode 100644 Documentation/ioctl/ioctl-number.txt
>  rename Documentation/{iostats.txt => iostats.rst} (99%)
>  rename Documentation/{irqflags-tracing.txt => irqflags-tracing.rst} (99%)
>  rename Documentation/{isa.txt => isa.rst} (99%)
>  rename Documentation/{isapnp.txt => isapnp.rst} (98%)
>  rename Documentation/kbuild/{headers_install.txt => headers_install.rst} (96%)
>  create mode 100644 Documentation/kbuild/index.rst
>  create mode 100644 Documentation/kbuild/issues.rst
>  rename Documentation/kbuild/{kbuild.txt => kbuild.rst} (72%)
>  rename Documentation/kbuild/{kconfig-language.txt => kconfig-language.rst} (85%)
>  rename Documentation/kbuild/{kconfig-macro-language.txt => kconfig-macro-language.rst} (94%)
>  rename Documentation/kbuild/{kconfig.txt => kconfig.rst} (80%)
>  rename Documentation/kbuild/{makefiles.txt => makefiles.rst} (84%)
>  rename Documentation/kbuild/{modules.txt => modules.rst} (84%)
>  create mode 100644 Documentation/kdump/index.rst
>  rename Documentation/kdump/{kdump.txt => kdump.rst} (91%)
>  rename Documentation/kdump/{vmcoreinfo.txt => vmcoreinfo.rst} (95%)
>  rename Documentation/{kernel-per-CPU-kthreads.txt => kernel-per-CPU-kthreads.rst} (99%)
>  rename Documentation/{kobject.txt => kobject.rst} (99%)
>  rename Documentation/{kprobes.txt => kprobes.rst} (99%)
>  rename Documentation/{kref.txt => kref.rst} (99%)
>  rename Documentation/laptops/{asus-laptop.txt => asus-laptop.rst} (84%)
>  rename Documentation/laptops/{disk-shock-protection.txt => disk-shock-protection.rst} (91%)
>  create mode 100644 Documentation/laptops/index.rst
>  rename Documentation/laptops/{laptop-mode.txt => laptop-mode.rst} (62%)
>  rename Documentation/laptops/{sony-laptop.txt => sony-laptop.rst} (85%)
>  rename Documentation/laptops/{sonypi.txt => sonypi.rst} (87%)
>  rename Documentation/laptops/{thinkpad-acpi.txt => thinkpad-acpi.rst} (88%)
>  rename Documentation/laptops/{toshiba_haps.txt => toshiba_haps.rst} (60%)
>  rename Documentation/{ldm.txt => ldm.rst} (99%)
>  create mode 100644 Documentation/leds/index.rst
>  rename Documentation/leds/{leds-blinkm.txt => leds-blinkm.rst} (56%)
>  rename Documentation/leds/{leds-class-flash.txt => leds-class-flash.rst} (74%)
>  rename Documentation/leds/{leds-class.txt => leds-class.rst} (92%)
>  rename Documentation/leds/{leds-lm3556.txt => leds-lm3556.rst} (70%)
>  rename Documentation/leds/{leds-lp3944.txt => leds-lp3944.rst} (78%)
>  create mode 100644 Documentation/leds/leds-lp5521.rst
>  delete mode 100644 Documentation/leds/leds-lp5521.txt
>  create mode 100644 Documentation/leds/leds-lp5523.rst
>  delete mode 100644 Documentation/leds/leds-lp5523.txt
>  create mode 100644 Documentation/leds/leds-lp5562.rst
>  delete mode 100644 Documentation/leds/leds-lp5562.txt
>  create mode 100644 Documentation/leds/leds-lp55xx.rst
>  delete mode 100644 Documentation/leds/leds-lp55xx.txt
>  create mode 100644 Documentation/leds/leds-mlxcpld.rst
>  delete mode 100644 Documentation/leds/leds-mlxcpld.txt
>  rename Documentation/leds/{ledtrig-oneshot.txt => ledtrig-oneshot.rst} (90%)
>  rename Documentation/leds/{ledtrig-transient.txt => ledtrig-transient.rst} (81%)
>  rename Documentation/leds/{ledtrig-usbport.txt => ledtrig-usbport.rst} (86%)
>  rename Documentation/leds/{uleds.txt => uleds.rst} (95%)
>  rename Documentation/livepatch/{callbacks.txt => callbacks.rst} (94%)
>  rename Documentation/livepatch/{cumulative-patches.txt => cumulative-patches.rst} (89%)
>  create mode 100644 Documentation/livepatch/index.rst
>  rename Documentation/livepatch/{livepatch.txt => livepatch.rst} (93%)
>  rename Documentation/livepatch/{module-elf-format.txt => module-elf-format.rst} (68%)
>  rename Documentation/livepatch/{shadow-vars.txt => shadow-vars.rst} (87%)
>  create mode 100644 Documentation/locking/index.rst
>  rename Documentation/locking/{lockdep-design.txt => lockdep-design.rst} (93%)
>  create mode 100644 Documentation/locking/lockstat.rst
>  delete mode 100644 Documentation/locking/lockstat.txt
>  rename Documentation/locking/{locktorture.txt => locktorture.rst} (57%)
>  rename Documentation/locking/{mutex-design.txt => mutex-design.rst} (94%)
>  rename Documentation/locking/{rt-mutex-design.txt => rt-mutex-design.rst} (91%)
>  rename Documentation/locking/{rt-mutex.txt => rt-mutex.rst} (70%)
>  rename Documentation/locking/{spinlocks.txt => spinlocks.rst} (89%)
>  rename Documentation/locking/{ww-mutex-design.txt => ww-mutex-design.rst} (93%)
>  rename Documentation/{lockup-watchdogs.txt => lockup-watchdogs.rst} (99%)
>  rename Documentation/{lsm.txt => lsm.rst} (99%)
>  rename Documentation/{lzo.txt => lzo.rst} (99%)
>  create mode 100644 Documentation/m68k/index.rst
>  rename Documentation/m68k/{kernel-options.txt => kernel-options.rst} (78%)
>  rename Documentation/{mailbox.txt => mailbox.rst} (99%)
>  create mode 100644 Documentation/md/index.rst
>  rename Documentation/md/{md-cluster.txt => md-cluster.rst} (68%)
>  rename Documentation/md/{raid5-cache.txt => raid5-cache.rst} (92%)
>  rename Documentation/md/{raid5-ppl.txt => raid5-ppl.rst} (98%)
>  rename Documentation/memory-devices/{ti-emif.txt => ti-emif.rst} (81%)
>  rename Documentation/{men-chameleon-bus.txt => men-chameleon-bus.rst} (99%)
>  create mode 100644 Documentation/mic/index.rst
>  rename Documentation/mic/{mic_overview.txt => mic_overview.rst} (96%)
>  rename Documentation/mic/{scif_overview.txt => scif_overview.rst} (76%)
>  create mode 100644 Documentation/mmc/index.rst
>  rename Documentation/mmc/{mmc-async-req.txt => mmc-async-req.rst} (75%)
>  rename Documentation/mmc/{mmc-dev-attrs.txt => mmc-dev-attrs.rst} (73%)
>  rename Documentation/mmc/{mmc-dev-parts.txt => mmc-dev-parts.rst} (83%)
>  rename Documentation/mmc/{mmc-tools.txt => mmc-tools.rst} (92%)
>  create mode 100644 Documentation/mtd/index.rst
>  rename Documentation/mtd/{intel-spi.txt => intel-spi.rst} (71%)
>  rename Documentation/mtd/{nand_ecc.txt => nand_ecc.rst} (67%)
>  rename Documentation/mtd/{spi-nor.txt => spi-nor.rst} (94%)
>  rename Documentation/namespaces/{compatibility-list.txt => compatibility-list.rst} (86%)
>  create mode 100644 Documentation/namespaces/index.rst
>  rename Documentation/namespaces/{resource-control.txt => resource-control.rst} (89%)
>  rename Documentation/netlabel/{cipso_ipv4.txt => cipso_ipv4.rst} (87%)
>  create mode 100644 Documentation/netlabel/draft_ietf.rst
>  create mode 100644 Documentation/netlabel/index.rst
>  rename Documentation/netlabel/{introduction.txt => introduction.rst} (91%)
>  rename Documentation/netlabel/{lsm_interface.txt => lsm_interface.rst} (88%)
>  create mode 100644 Documentation/nfc/index.rst
>  rename Documentation/nfc/{nfc-hci.txt => nfc-hci.rst} (71%)
>  rename Documentation/nfc/{nfc-pn544.txt => nfc-pn544.rst} (82%)
>  rename Documentation/{nommu-mmap.txt => nommu-mmap.rst} (99%)
>  rename Documentation/{ntb.txt => ntb.rst} (99%)
>  rename Documentation/{numastat.txt => numastat.rst} (99%)
>  rename Documentation/nvdimm/{btt.txt => btt.rst} (71%)
>  create mode 100644 Documentation/nvdimm/index.rst
>  rename Documentation/nvdimm/{nvdimm.txt => nvdimm.rst} (60%)
>  rename Documentation/nvdimm/{security.txt => security.rst} (99%)
>  rename Documentation/nvmem/{nvmem.txt => nvmem.rst} (62%)
>  rename Documentation/{padata.txt => padata.rst} (99%)
>  rename Documentation/{parport-lowlevel.txt => parport-lowlevel.rst} (99%)
>  rename Documentation/pcmcia/{devicetable.txt => devicetable.rst} (97%)
>  rename Documentation/pcmcia/{driver-changes.txt => driver-changes.rst} (90%)
>  rename Documentation/pcmcia/{driver.txt => driver.rst} (66%)
>  create mode 100644 Documentation/pcmcia/index.rst
>  rename Documentation/pcmcia/{locking.txt => locking.rst} (81%)
>  rename Documentation/{percpu-rw-semaphore.txt => percpu-rw-semaphore.rst} (99%)
>  rename Documentation/perf/{arm-ccn.txt => arm-ccn.rst} (86%)
>  rename Documentation/perf/{arm_dsu_pmu.txt => arm_dsu_pmu.rst} (92%)
>  rename Documentation/perf/{hisi-pmu.txt => hisi-pmu.rst} (73%)
>  create mode 100644 Documentation/perf/index.rst
>  rename Documentation/perf/{qcom_l2_pmu.txt => qcom_l2_pmu.rst} (94%)
>  rename Documentation/perf/{qcom_l3_pmu.txt => qcom_l3_pmu.rst} (93%)
>  rename Documentation/perf/{thunderx2-pmu.txt => thunderx2-pmu.rst} (73%)
>  rename Documentation/perf/{xgene-pmu.txt => xgene-pmu.rst} (96%)
>  rename Documentation/{phy.txt => phy.rst} (99%)
>  rename Documentation/phy/{samsung-usb2.txt => samsung-usb2.rst} (77%)
>  rename Documentation/{pi-futex.txt => pi-futex.rst} (99%)
>  rename Documentation/{pnp.txt => pnp.rst} (99%)
>  rename Documentation/power/{apm-acpi.txt => apm-acpi.rst} (87%)
>  rename Documentation/power/{basic-pm-debugging.txt => basic-pm-debugging.rst} (87%)
>  rename Documentation/power/{charger-manager.txt => charger-manager.rst} (78%)
>  rename Documentation/power/{drivers-testing.txt => drivers-testing.rst} (86%)
>  rename Documentation/power/{energy-model.txt => energy-model.rst} (74%)
>  rename Documentation/power/{freezing-of-tasks.txt => freezing-of-tasks.rst} (75%)
>  create mode 100644 Documentation/power/index.rst
>  rename Documentation/power/{interface.txt => interface.rst} (84%)
>  rename Documentation/power/{opp.txt => opp.rst} (78%)
>  rename Documentation/power/{pci.txt => pci.rst} (97%)
>  rename Documentation/power/{pm_qos_interface.txt => pm_qos_interface.rst} (62%)
>  create mode 100644 Documentation/power/power_supply_class.rst
>  delete mode 100644 Documentation/power/power_supply_class.txt
>  create mode 100644 Documentation/power/powercap/powercap.rst
>  delete mode 100644 Documentation/power/powercap/powercap.txt
>  rename Documentation/power/regulator/{consumer.txt => consumer.rst} (61%)
>  rename Documentation/power/regulator/{design.txt => design.rst} (86%)
>  rename Documentation/power/regulator/{machine.txt => machine.rst} (75%)
>  rename Documentation/power/regulator/{overview.txt => overview.rst} (79%)
>  create mode 100644 Documentation/power/regulator/regulator.rst
>  delete mode 100644 Documentation/power/regulator/regulator.txt
>  rename Documentation/power/{runtime_pm.txt => runtime_pm.rst} (89%)
>  rename Documentation/power/{s2ram.txt => s2ram.rst} (92%)
>  rename Documentation/power/{suspend-and-cpuhotplug.txt => suspend-and-cpuhotplug.rst} (90%)
>  rename Documentation/power/{suspend-and-interrupts.txt => suspend-and-interrupts.rst} (98%)
>  rename Documentation/power/{swsusp-and-swap-files.txt => swsusp-and-swap-files.rst} (83%)
>  rename Documentation/power/{swsusp-dmcrypt.txt => swsusp-dmcrypt.rst} (67%)
>  create mode 100644 Documentation/power/swsusp.rst
>  delete mode 100644 Documentation/power/swsusp.txt
>  rename Documentation/power/{tricks.txt => tricks.rst} (93%)
>  rename Documentation/power/{userland-swsusp.txt => userland-swsusp.rst} (85%)
>  rename Documentation/power/{video.txt => video.rst} (56%)
>  rename Documentation/powerpc/{bootwrapper.txt => bootwrapper.rst} (93%)
>  rename Documentation/powerpc/{cpu_families.txt => cpu_families.rst} (95%)
>  rename Documentation/powerpc/{cpu_features.txt => cpu_features.rst} (97%)
>  rename Documentation/powerpc/{cxl.txt => cxl.rst} (95%)
>  rename Documentation/powerpc/{cxlflash.txt => cxlflash.rst} (98%)
>  rename Documentation/powerpc/{DAWR-POWER9.txt => dawr-power9.rst} (95%)
>  rename Documentation/powerpc/{dscr.txt => dscr.rst} (91%)
>  rename Documentation/powerpc/{eeh-pci-error-recovery.txt => eeh-pci-error-recovery.rst} (82%)
>  rename Documentation/powerpc/{firmware-assisted-dump.txt => firmware-assisted-dump.rst} (80%)
>  rename Documentation/powerpc/{hvcs.txt => hvcs.rst} (91%)
>  create mode 100644 Documentation/powerpc/index.rst
>  rename Documentation/powerpc/{mpc52xx.txt => mpc52xx.rst} (91%)
>  rename Documentation/powerpc/{pci_iov_resource_on_powernv.txt => pci_iov_resource_on_powernv.rst} (97%)
>  rename Documentation/powerpc/{pmu-ebb.txt => pmu-ebb.rst} (99%)
>  create mode 100644 Documentation/powerpc/ptrace.rst
>  delete mode 100644 Documentation/powerpc/ptrace.txt
>  rename Documentation/powerpc/{qe_firmware.txt => qe_firmware.rst} (95%)
>  rename Documentation/powerpc/{syscall64-abi.txt => syscall64-abi.rst} (82%)
>  rename Documentation/powerpc/{transactional_memory.txt => transactional_memory.rst} (93%)
>  rename Documentation/{preempt-locking.txt => preempt-locking.rst} (99%)
>  create mode 100644 Documentation/pti/pti_intel_mid.rst
>  delete mode 100644 Documentation/pti/pti_intel_mid.txt
>  rename Documentation/{pwm.txt => pwm.rst} (99%)
>  create mode 100644 Documentation/rapidio/index.rst
>  rename Documentation/rapidio/{mport_cdev.txt => mport_cdev.rst} (84%)
>  rename Documentation/rapidio/{rapidio.txt => rapidio.rst} (97%)
>  rename Documentation/rapidio/{rio_cm.txt => rio_cm.rst} (76%)
>  rename Documentation/rapidio/{sysfs.txt => sysfs.rst} (75%)
>  rename Documentation/rapidio/{tsi721.txt => tsi721.rst} (79%)
>  rename Documentation/{rbtree.txt => rbtree.rst} (99%)
>  rename Documentation/{remoteproc.txt => remoteproc.rst} (99%)
>  rename Documentation/{rfkill.txt => rfkill.rst} (99%)
>  create mode 100644 Documentation/riscv/index.rst
>  rename Documentation/riscv/{pmu.txt => pmu.rst} (77%)
>  rename Documentation/{robust-futex-ABI.txt => robust-futex-ABI.rst} (99%)
>  rename Documentation/{robust-futexes.txt => robust-futexes.rst} (99%)
>  rename Documentation/{rpmsg.txt => rpmsg.rst} (99%)
>  rename Documentation/{rtc.txt => rtc.rst} (99%)
>  rename Documentation/s390/{3270.txt => 3270.rst} (90%)
>  delete mode 100644 Documentation/s390/Debugging390.txt
>  rename Documentation/s390/{cds.txt => cds.rst} (64%)
>  rename Documentation/s390/{CommonIO => common_io.rst} (87%)
>  rename Documentation/s390/{DASD => dasd.rst} (92%)
>  create mode 100644 Documentation/s390/debugging390.rst
>  rename Documentation/s390/{driver-model.txt => driver-model.rst} (73%)
>  create mode 100644 Documentation/s390/index.rst
>  rename Documentation/s390/{monreader.txt => monreader.rst} (81%)
>  rename Documentation/s390/{qeth.txt => qeth.rst} (62%)
>  create mode 100644 Documentation/s390/s390dbf.rst
>  delete mode 100644 Documentation/s390/s390dbf.txt
>  create mode 100644 Documentation/s390/text_files.rst
>  rename Documentation/s390/{vfio-ap.txt => vfio-ap.rst} (72%)
>  rename Documentation/s390/{vfio-ccw.txt => vfio-ccw.rst} (88%)
>  rename Documentation/s390/{zfcpdump.txt => zfcpdump.rst} (97%)
>  rename Documentation/scheduler/{completion.txt => completion.rst} (94%)
>  create mode 100644 Documentation/scheduler/index.rst
>  rename Documentation/scheduler/{sched-arch.txt => sched-arch.rst} (81%)
>  rename Documentation/scheduler/{sched-bwc.txt => sched-bwc.rst} (90%)
>  rename Documentation/scheduler/{sched-deadline.txt => sched-deadline.rst} (88%)
>  rename Documentation/scheduler/{sched-design-CFS.txt => sched-design-CFS.rst} (97%)
>  rename Documentation/scheduler/{sched-domains.txt => sched-domains.rst} (97%)
>  rename Documentation/scheduler/{sched-energy.txt => sched-energy.rst} (96%)
>  rename Documentation/scheduler/{sched-nice-design.txt => sched-nice-design.rst} (98%)
>  rename Documentation/scheduler/{sched-rt-group.txt => sched-rt-group.rst} (95%)
>  rename Documentation/scheduler/{sched-stats.txt => sched-stats.rst} (91%)
>  create mode 100644 Documentation/scheduler/text_files.rst
>  rename Documentation/security/tpm/{xen-tpmfront.txt => xen-tpmfront.rst} (66%)
>  rename Documentation/serial/{README.cycladesZ => cyclades_z.rst} (85%)
>  rename Documentation/serial/{driver => driver.rst} (92%)
>  create mode 100644 Documentation/serial/index.rst
>  delete mode 100644 Documentation/serial/moxa-smartio
>  create mode 100644 Documentation/serial/moxa-smartio.rst
>  create mode 100644 Documentation/serial/n_gsm.rst
>  delete mode 100644 Documentation/serial/n_gsm.txt
>  rename Documentation/serial/{rocket.txt => rocket.rst} (68%)
>  rename Documentation/serial/{serial-iso7816.txt => serial-iso7816.rst} (85%)
>  rename Documentation/serial/{serial-rs485.txt => serial-rs485.rst} (89%)
>  rename Documentation/serial/{tty.txt => tty.rst} (74%)
>  rename Documentation/{sgi-ioc4.txt => sgi-ioc4.rst} (99%)
>  rename Documentation/{siphash.txt => siphash.rst} (99%)
>  rename Documentation/{smsc_ece1099.txt => smsc_ece1099.rst} (99%)
>  rename Documentation/sparc/{adi.txt => adi.rst} (70%)
>  rename Documentation/sparc/{console.txt => console.rst} (53%)
>  create mode 100644 Documentation/sparc/index.rst
>  rename Documentation/sparc/oradax/{oracle-dax.txt => oracle-dax.rst} (95%)
>  rename Documentation/{speculation.txt => speculation.rst} (99%)
>  rename Documentation/{static-keys.txt => static-keys.rst} (99%)
>  rename Documentation/{svga.txt => svga.rst} (99%)
>  rename Documentation/{switchtec.txt => switchtec.rst} (98%)
>  rename Documentation/{sync_file.txt => sync_file.rst} (99%)
>  create mode 100644 Documentation/sysctl/abi.rst
>  delete mode 100644 Documentation/sysctl/abi.txt
>  rename Documentation/sysctl/{fs.txt => fs.rst} (77%)
>  rename Documentation/sysctl/{README => index.rst} (78%)
>  rename Documentation/sysctl/{kernel.txt => kernel.rst} (79%)
>  rename Documentation/sysctl/{net.txt => net.rst} (85%)
>  rename Documentation/sysctl/{sunrpc.txt => sunrpc.rst} (62%)
>  rename Documentation/sysctl/{user.txt => user.rst} (77%)
>  rename Documentation/sysctl/{vm.txt => vm.rst} (84%)
>  create mode 100644 Documentation/target/index.rst
>  create mode 100644 Documentation/target/scripts.rst
>  create mode 100644 Documentation/target/tcm_mod_builder.rst
>  delete mode 100644 Documentation/target/tcm_mod_builder.txt
>  rename Documentation/target/{tcmu-design.txt => tcmu-design.rst} (69%)
>  rename Documentation/{tee.txt => tee.rst} (99%)
>  rename Documentation/thermal/{cpu-cooling-api.txt => cpu-cooling-api.rst} (82%)
>  rename Documentation/thermal/{exynos_thermal => exynos_thermal.rst} (67%)
>  delete mode 100644 Documentation/thermal/exynos_thermal_emulation
>  create mode 100644 Documentation/thermal/exynos_thermal_emulation.rst
>  create mode 100644 Documentation/thermal/index.rst
>  rename Documentation/thermal/{intel_powerclamp.txt => intel_powerclamp.rst} (76%)
>  rename Documentation/thermal/{nouveau_thermal => nouveau_thermal.rst} (64%)
>  rename Documentation/thermal/{power_allocator.txt => power_allocator.rst} (74%)
>  rename Documentation/thermal/{sysfs-api.txt => sysfs-api.rst} (66%)
>  rename Documentation/thermal/{x86_pkg_temperature_thermal => x86_pkg_temperature_thermal.rst} (80%)
>  rename Documentation/{this_cpu_ops.txt => this_cpu_ops.rst} (99%)
>  rename Documentation/timers/{highres.txt => highres.rst} (98%)
>  rename Documentation/timers/{hpet.txt => hpet.rst} (91%)
>  rename Documentation/timers/{hrtimers.txt => hrtimers.rst} (98%)
>  create mode 100644 Documentation/timers/index.rst
>  rename Documentation/timers/{NO_HZ.txt => no_hz.rst} (93%)
>  rename Documentation/timers/{timekeeping.txt => timekeeping.rst} (98%)
>  rename Documentation/timers/{timers-howto.txt => timers-howto.rst} (93%)
>  rename Documentation/{unaligned-memory-access.txt => unaligned-memory-access.rst} (99%)
>  rename Documentation/{vfio-mediated-device.txt => vfio-mediated-device.rst} (99%)
>  rename Documentation/{vfio.txt => vfio.rst} (99%)
>  rename Documentation/{video-output.txt => video-output.rst} (99%)
>  rename Documentation/watchdog/{convert_drivers_to_kernel_api.txt => convert_drivers_to_kernel_api.rst} (75%)
>  rename Documentation/watchdog/{hpwdt.txt => hpwdt.rst} (77%)
>  create mode 100644 Documentation/watchdog/index.rst
>  rename Documentation/watchdog/{mlx-wdt.txt => mlx-wdt.rst} (78%)
>  rename Documentation/watchdog/{pcwd-watchdog.txt => pcwd-watchdog.rst} (89%)
>  rename Documentation/watchdog/{watchdog-api.txt => watchdog-api.rst} (80%)
>  rename Documentation/watchdog/{watchdog-kernel-api.txt => watchdog-kernel-api.rst} (90%)
>  create mode 100644 Documentation/watchdog/watchdog-parameters.rst
>  delete mode 100644 Documentation/watchdog/watchdog-parameters.txt
>  rename Documentation/watchdog/{watchdog-pm.txt => watchdog-pm.rst} (92%)
>  rename Documentation/watchdog/{wdt.txt => wdt.rst} (68%)
>  rename Documentation/xilinx/{eemi.txt => eemi.rst} (92%)
>  create mode 100644 Documentation/xilinx/index.rst
>  rename Documentation/{xillybus.txt => xillybus.rst} (99%)
>  rename Documentation/xtensa/{atomctl.txt => atomctl.rst} (81%)
>  rename Documentation/xtensa/{booting.txt => booting.rst} (91%)
>  create mode 100644 Documentation/xtensa/index.rst
>  create mode 100644 Documentation/xtensa/mmu.rst
>  delete mode 100644 Documentation/xtensa/mmu.txt
>  rename Documentation/{xz.txt => xz.rst} (99%)
>  rename Documentation/{zorro.txt => zorro.rst} (99%)

Ah, I forgot to mention on this description: the conversions were
hand-made (except for one or two exceptions where I wrote small scripts
to help on some specific patches - explicitly mentioned).

In order to fix the broken documentation links, after the
changes, I used the enclosed script. It basically detects
renames and run a loop to fix all occurrences of such renames.

It doesn't work 100% - as it only works when the changes of the file
is smaller than 50% of the file - with is the default logic for
git merge detection. Yet, that saves a lot of time when adjusting
the renames. I used it together with ./scripts/documentation-file-ref-check
in order to double-check if all references to renamed files
were properly addressed.

Thanks,
Mauro

--


#!/bin/perl
use strict;

open IN,"git show|";

my $from;

while(<IN>) {
	if (m/rename from (\S.*)/) {
		die "Error: two froms!" if ($from ne "");
		$from = $1;
		next;
	}
	if (m/rename to (\S.*)/) {
		die "Error: no from!" if ($from eq "");

		my $cmd = "for i in \$(git grep -l $from); do sed s,$from,$1,g -i \$i; done";
		$from = "";
		print "$cmd\n";
		qx($cmd);
	}
}


^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 28/79] docs: ptp.txt: convert to ReST and move to driver-api
  2019-04-22 13:27   ` [PATCH v2 28/79] docs: ptp.txt: convert to ReST and move to driver-api Mauro Carvalho Chehab
@ 2019-04-22 15:40     ` Richard Cochran
  0 siblings, 0 replies; 124+ messages in thread
From: Richard Cochran @ 2019-04-22 15:40 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, David S. Miller, netdev

On Mon, Apr 22, 2019 at 10:27:17AM -0300, Mauro Carvalho Chehab wrote:
> The conversion is trivial: just adjust title markups.
> 
> In order to avoid conflicts, let's add an :orphan: tag
> to it, to be removed when this file gets added to the
> driver-api book.

Acked-by: Richard Cochran <richardcochran@gmail.com>

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 27/79] docs: pps.txt: convert to ReST and rename to pps.rst
  2019-04-22 13:27   ` [PATCH v2 27/79] docs: pps.txt: convert to ReST and rename to pps.rst Mauro Carvalho Chehab
@ 2019-04-22 16:19     ` Rodolfo Giometti
  0 siblings, 0 replies; 124+ messages in thread
From: Rodolfo Giometti @ 2019-04-22 16:19 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, linux-kernel, Jonathan Corbet

On 22/04/2019 15:27, Mauro Carvalho Chehab wrote:
> This file is already in a good shape: just its title and
> adding some literal block markups is needed for it to be
> part of the document.
> 
> While it has a small chapter with sysfs stuff, most of
> the document is focused on driver development.
> 
> As it describes a kernel API, move it to the driver-api
> directory.
> 
> In order to avoid conflicts, let's add an :orphan: tag
> to it, to be removed when added to the driver-api book.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Acked-by: Rodolfo Giometti <giometti@enneenne.com>

-- 
GNU/Linux Solutions                  e-mail: giometti@enneenne.com
Linux Device Driver                          giometti@linux.it
Embedded Systems                     phone:  +39 349 2432127
UNIX programming                     skype:  rodolfo.giometti

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 23/79] docs: netlabel: convert docs to ReST and rename to *.rst
  2019-04-22 13:27   ` [PATCH v2 23/79] docs: netlabel: " Mauro Carvalho Chehab
@ 2019-04-22 18:10     ` Paul Moore
  0 siblings, 0 replies; 124+ messages in thread
From: Paul Moore @ 2019-04-22 18:10 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, netdev, linux-security-module

On Mon, Apr 22, 2019 at 9:28 AM Mauro Carvalho Chehab
<mchehab+samsung@kernel.org> wrote:
>
> Convert netlabel documentation to ReST.
>
> This was trivial: just add proper title markups.
>
> At its new index.rst, let's add a :orphan: while this is not linked to
> the main index.rst file, in order to avoid build warnings.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> ---
>  .../{cipso_ipv4.txt => cipso_ipv4.rst}        | 19 +++++++++++------
>  Documentation/netlabel/draft_ietf.rst         |  5 +++++
>  Documentation/netlabel/index.rst              | 21 +++++++++++++++++++
>  .../{introduction.txt => introduction.rst}    | 16 +++++++++-----
>  .../{lsm_interface.txt => lsm_interface.rst}  | 16 +++++++++-----
>  5 files changed, 61 insertions(+), 16 deletions(-)
>  rename Documentation/netlabel/{cipso_ipv4.txt => cipso_ipv4.rst} (87%)
>  create mode 100644 Documentation/netlabel/draft_ietf.rst
>  create mode 100644 Documentation/netlabel/index.rst
>  rename Documentation/netlabel/{introduction.txt => introduction.rst} (91%)
>  rename Documentation/netlabel/{lsm_interface.txt => lsm_interface.rst} (88%)

Still looks fine to me.  I should go through these docs again to make
sure they are current (the old email address definitely is a bad
sign).

Acked-by: Paul Moore <paul@paul-moore.com>

-- 
paul moore
www.paul-moore.com

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 48/79] docs: driver-model: convert docs to ReST and rename to *.rst
  2019-04-22 13:27   ` [PATCH v2 48/79] docs: driver-model: " Mauro Carvalho Chehab
  2019-04-22 14:47     ` Julia Lawall
@ 2019-04-22 22:30     ` Guenter Roeck
  1 sibling, 0 replies; 124+ messages in thread
From: Guenter Roeck @ 2019-04-22 22:30 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Linus Walleij, Bartosz Golaszewski,
	Jean Delvare, Greg Kroah-Hartman, Rafael J. Wysocki,
	Jeff Kirsher, David S. Miller, Julia Lawall, Gilles Muller,
	Nicolas Palix, Michal Marek, linux-gpio, linux-hwmon,
	intel-wired-lan, netdev, cocci

On Mon, Apr 22, 2019 at 10:27:37AM -0300, Mauro Carvalho Chehab wrote:
> Convert the various documents at the driver-model, preparing
> them to be part of the driver-api book.
> 
> The conversion is actually:
>   - add blank lines and identation in order to identify paragraphs;
>   - fix tables markups;
>   - add some lists markups;
>   - mark literal blocks;
>   - adjust title markups.
> 
> At its new index.rst, let's add a :orphan: while this is not linked to
> the main index.rst file, in order to avoid build warnings.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> Acked-by: Julia Lawall <julia.lawall@lip6.fr>
> ---
>  Documentation/driver-api/gpio/driver.rst      |   2 +-
>  .../driver-model/{binding.txt => binding.rst} |  20 +-
>  .../driver-model/{bus.txt => bus.rst}         |  69 ++--
>  .../driver-model/{class.txt => class.rst}     |  74 ++--
>  ...esign-patterns.txt => design-patterns.rst} | 106 +++---
>  .../driver-model/{device.txt => device.rst}   |  57 +--
>  .../driver-model/{devres.txt => devres.rst}   |  50 +--
>  .../driver-model/{driver.txt => driver.rst}   | 112 +++---
>  Documentation/driver-model/index.rst          |  26 ++
>  .../{overview.txt => overview.rst}            |  37 +-
>  .../{platform.txt => platform.rst}            |  30 +-
>  .../driver-model/{porting.txt => porting.rst} | 333 +++++++++---------
>  Documentation/eisa.txt                        |   4 +-
>  Documentation/hwmon/submitting-patches.rst    |   2 +-

For hwmon:

Acked-by: Guenter Roeck <linux@roeck-us.net>

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 10/79] docs: cpu-freq: convert docs to ReST and rename to *.rst
  2019-04-22 13:26   ` [PATCH v2 10/79] docs: cpu-freq: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
@ 2019-04-23  8:21     ` Rafael J. Wysocki
  0 siblings, 0 replies; 124+ messages in thread
From: Rafael J. Wysocki @ 2019-04-23  8:21 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab,
	Linux Kernel Mailing List, Jonathan Corbet, Rafael J. Wysocki,
	Viresh Kumar, Linux PM

On Mon, Apr 22, 2019 at 3:36 PM Mauro Carvalho Chehab
<mchehab+samsung@kernel.org> wrote:
>
> The conversion is actually:
>   - add blank lines and identation in order to identify paragraphs;
>   - fix tables markups;
>   - add some lists markups;
>   - mark literal blocks;
>   - adjust title markups.
>
> At its new index.rst, let's add a :orphan: while this is not linked to
> the main index.rst file, in order to avoid build warnings.

Well, as stated before, please drop this one too.

There is a plan to convert the remaining cpufreq documentation into
.rst (and which has already been done for the admin-guide part) and
the resulting files should go into driver-api.

Thanks,
Rafael

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 38/79] docs: scheduler: convert docs to ReST and rename to *.rst
  2019-04-22 13:27   ` [PATCH v2 38/79] docs: scheduler: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
@ 2019-04-23  8:29     ` Peter Zijlstra
  2019-04-23 10:32       ` Ingo Molnar
  0 siblings, 1 reply; 124+ messages in thread
From: Peter Zijlstra @ 2019-04-23  8:29 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Ingo Molnar

On Mon, Apr 22, 2019 at 10:27:27AM -0300, Mauro Carvalho Chehab wrote:
> In order to prepare to add them to the Kernel API book,
> convert the files to ReST format.
> 
> The conversion is actually:
>   - add blank lines and identation in order to identify paragraphs;
>   - fix tables markups;
>   - add some lists markups;
>   - mark literal blocks;
>   - adjust title markups.
> 
> At its new index.rst, let's add a :orphan: while this is not linked to
> the main index.rst file, in order to avoid build warnings.

Well, just don't expect me to ever touch these files again.

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 38/79] docs: scheduler: convert docs to ReST and rename to *.rst
  2019-04-23  8:29     ` Peter Zijlstra
@ 2019-04-23 10:32       ` Ingo Molnar
  2019-04-23 11:19         ` Peter Zijlstra
  0 siblings, 1 reply; 124+ messages in thread
From: Ingo Molnar @ 2019-04-23 10:32 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Mauro Carvalho Chehab, Linux Doc Mailing List,
	Mauro Carvalho Chehab, linux-kernel, Jonathan Corbet,
	Ingo Molnar


* Peter Zijlstra <peterz@infradead.org> wrote:

> On Mon, Apr 22, 2019 at 10:27:27AM -0300, Mauro Carvalho Chehab wrote:
> > In order to prepare to add them to the Kernel API book,
> > convert the files to ReST format.
> > 
> > The conversion is actually:
> >   - add blank lines and identation in order to identify paragraphs;
> >   - fix tables markups;
> >   - add some lists markups;
> >   - mark literal blocks;
> >   - adjust title markups.
> > 
> > At its new index.rst, let's add a :orphan: while this is not linked to
> > the main index.rst file, in order to avoid build warnings.
> 
> Well, just don't expect me to ever touch these files again.

The .rst files still read like text files, right?

So just pretend they are text files, I'll fix up any markup errors! :-)

Thanks,

	Ingo

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 38/79] docs: scheduler: convert docs to ReST and rename to *.rst
  2019-04-23 10:32       ` Ingo Molnar
@ 2019-04-23 11:19         ` Peter Zijlstra
  2019-04-23 12:30           ` Ingo Molnar
  0 siblings, 1 reply; 124+ messages in thread
From: Peter Zijlstra @ 2019-04-23 11:19 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Mauro Carvalho Chehab, Linux Doc Mailing List,
	Mauro Carvalho Chehab, linux-kernel, Jonathan Corbet,
	Ingo Molnar

On Tue, Apr 23, 2019 at 12:32:02PM +0200, Ingo Molnar wrote:

> The .rst files still read like text files, right?

Like a harder to read text file for no gains.

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 15/79] docs: gpio: convert docs to ReST and rename to *.rst
  2019-04-22 13:27   ` [PATCH v2 15/79] docs: gpio: " Mauro Carvalho Chehab
@ 2019-04-23 11:23     ` Linus Walleij
  2019-04-23 12:36       ` Mauro Carvalho Chehab
  2019-04-23 21:30     ` Linus Walleij
  1 sibling, 1 reply; 124+ messages in thread
From: Linus Walleij @ 2019-04-23 11:23 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Bartosz Golaszewski, open list:GPIO SUBSYSTEM

On Mon, Apr 22, 2019 at 3:28 PM Mauro Carvalho Chehab
<mchehab+samsung@kernel.org> wrote:

> The API described at sysfs.txt is deprecated.
>
> Still, as it is still part of the Kernel (and will likely be
> there for some time, as we don't simply remove APIs). So,
> it makes sense to keep it there.
>
> The conversion of this file is trivial:
>   - add blank lines and identation in order to identify paragraphs;
>   - mark a literal block as such.
>
> At its new index.rst, let's add a :orphan: while this is not linked to
> the main index.rst file, in order to avoid build warnings.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Same question as the v1: should I apply it or will you :)

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 38/79] docs: scheduler: convert docs to ReST and rename to *.rst
  2019-04-23 11:19         ` Peter Zijlstra
@ 2019-04-23 12:30           ` Ingo Molnar
  0 siblings, 0 replies; 124+ messages in thread
From: Ingo Molnar @ 2019-04-23 12:30 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Mauro Carvalho Chehab, Linux Doc Mailing List,
	Mauro Carvalho Chehab, linux-kernel, Jonathan Corbet,
	Ingo Molnar


* Peter Zijlstra <peterz@infradead.org> wrote:

> On Tue, Apr 23, 2019 at 12:32:02PM +0200, Ingo Molnar wrote:
> 
> > The .rst files still read like text files, right?
> 
> Like a harder to read text file for no gains.

I just looked through a couple of RST files in Documentation/, and they 
look like perfectly readable text files to me.

Some of the formatting details are arguably 'special' and can be broken 
via "text edits" without being aware of the RST markup relevance - but I 
don't think it's a problem for RST-unaware developers to break that 
markup, the Documentation/ folks have been rather generous and flexible 
in fixing those up, in addition to fixing all the typos as well.

So I'd be cautiously in favor of the RST conversion, assuming I don't get 
yelled at if I break the markup. ;-)

Thanks,

	Ingo

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 15/79] docs: gpio: convert docs to ReST and rename to *.rst
  2019-04-23 11:23     ` Linus Walleij
@ 2019-04-23 12:36       ` Mauro Carvalho Chehab
  0 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-23 12:36 UTC (permalink / raw)
  To: Linus Walleij
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Bartosz Golaszewski, open list:GPIO SUBSYSTEM

Em Tue, 23 Apr 2019 13:23:50 +0200
Linus Walleij <linus.walleij@linaro.org> escreveu:

> On Mon, Apr 22, 2019 at 3:28 PM Mauro Carvalho Chehab
> <mchehab+samsung@kernel.org> wrote:
> 
> > The API described at sysfs.txt is deprecated.
> >
> > Still, as it is still part of the Kernel (and will likely be
> > there for some time, as we don't simply remove APIs). So,
> > it makes sense to keep it there.
> >
> > The conversion of this file is trivial:
> >   - add blank lines and identation in order to identify paragraphs;
> >   - mark a literal block as such.
> >
> > At its new index.rst, let's add a :orphan: while this is not linked to
> > the main index.rst file, in order to avoid build warnings.
> >
> > Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>  
> 
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> 
> Same question as the v1: should I apply it or will you :)

I suspect that it would be better if it gets applied via
the GPIO tree, in order to reduce potential merge conflicts.

Regards,
Mauro

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 56/79] docs: Documentation/*.txt: rename all ReST files to *.rst
       [not found]         ` <20190423130132.GT4038@hirez.programming.kicks-ass.net>
@ 2019-04-23 14:52           ` David Howells
  2019-04-23 16:54             ` Jonathan Corbet
  2019-04-23 19:37             ` Mauro Carvalho Chehab
  0 siblings, 2 replies; 124+ messages in thread
From: David Howells @ 2019-04-23 14:52 UTC (permalink / raw)
  To: Mike Snitzer
  Cc: dhowells, Peter Zijlstra, Mauro Carvalho Chehab, Jonathan Corbet,
	Linux Doc Mailing List, linux-kernel, linux-arch

Mike Snitzer <snitzer@redhat.com> wrote:

> Peter Zijlstra <peterz@infradead.org> wrote:
> 
> > But yes, I have 0 motivation to learn or abide by rst. It simply doesn't
> > give me anything in return. There is no upside, only worse text files :/
> 
> Right, but these changes aren't meant for our benefit.  They are for
> users who get cleaner web accessible Linux kernel docs.  Seems the
> decision has been made that the users' benefit, and broader
> modernization of Linux docs, outweighs the inconvenience for engineers
> who maintain the content of said documentation.

Whilst I can sympathise with Mauro and Jon - and appreciate the hard work
they've put into this, I do think that the engineers dealing directly with the
kernel code should be considered the primary audience.

There've been some changes that I've particularly objected to, such as
removing contents lists from files and replacing them with markup like:

	.. contents:: :local:

This actually impedes use of the file.  It should not be necessary to build
the docs to get that for ordinary use.


Anyway, the biggest doc issue in the kernel isn't addressed by the conversion
to ReST: and that is that most people don't seem interested in documenting
stuff - whether because writing documentation isn't as fun as writing code or
the fact that English isn't their native language, I don't know.  I can
sympathise more with the latter.

Kerneldoc is a start - and probably means that a lot of API functions are at
least slightly documented - but too many APIs are not mentioned in the
Documentation directory at all.  Remember: if you can't describe it, it's
probably wrong!

I'm not sure what we could do about this, but it would probably have to be
imposed from the top: no more undocumented APIs.  Any new API must come with
documentation; changes to APIs must include changes to the documentation.

If you really want to upset people, you could add: anyone who wants to alter
an already existing undocumented API must supply documentation for the whole
API (but that could be considered a bit cruel).

And anyone who says "But the code is the documentation!" needs to consider
carefully what happens to their code after it has been trampled, generalised,
split, combined, renormalised, cthulhuised, janitorised and had parts of it
migrate.

</rant>

And now, after that, I think a fresh cup of tea is called for!

David

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 31/79] docs: s390: convert docs to ReST and rename to *.rst
  2019-04-22 13:27   ` [PATCH v2 31/79] docs: s390: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
@ 2019-04-23 16:12     ` Farhan Ali
  2019-04-23 19:46       ` Mauro Carvalho Chehab
  2019-04-24 11:41     ` Cornelia Huck
  1 sibling, 1 reply; 124+ messages in thread
From: Farhan Ali @ 2019-04-23 16:12 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, linux-kernel, Jonathan Corbet,
	Martin Schwidefsky, Heiko Carstens, Tony Krowiak, Pierre Morel,
	Halil Pasic, Cornelia Huck, Eric Farman, linux-s390, kvm



On 04/22/2019 09:27 AM, Mauro Carvalho Chehab wrote:
> Convert all text files with s390 documentation to ReST format.
> 
> Tried to preserve as much as possible the original document
> format. Still, some of the files required some work in order
> for it to be visible on both plain text and after converted
> to html.
> 
> The conversion is actually:
>    - add blank lines and identation in order to identify paragraphs;
>    - fix tables markups;
>    - add some lists markups;
>    - mark literal blocks;
>    - adjust title markups.
> 
> At its new index.rst, let's add a :orphan: while this is not linked to
> the main index.rst file, in order to avoid build warnings.
> 
> Signed-off-by: Mauro Carvalho Chehab<mchehab+samsung@kernel.org>
> ---

Hi Mauro,

How would the s390 rst files be accessed from a top level index.rst 
file? Is there a view of the changes? I looked at a link you posted [1] 
as a reply in another thread, but I couldn't find the s390 docs there.

[1] https://www.infradead.org/~mchehab/rst_conversion/

Thanks
Farhan


^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 56/79] docs: Documentation/*.txt: rename all ReST files to *.rst
  2019-04-23 14:52           ` [PATCH v2 56/79] docs: Documentation/*.txt: rename all ReST files to *.rst David Howells
@ 2019-04-23 16:54             ` Jonathan Corbet
  2019-04-23 17:12               ` Peter Zijlstra
  2019-04-23 20:26               ` Mauro Carvalho Chehab
  2019-04-23 19:37             ` Mauro Carvalho Chehab
  1 sibling, 2 replies; 124+ messages in thread
From: Jonathan Corbet @ 2019-04-23 16:54 UTC (permalink / raw)
  To: David Howells
  Cc: Mike Snitzer, Peter Zijlstra, Mauro Carvalho Chehab,
	Linux Doc Mailing List, linux-kernel, linux-arch

On Tue, 23 Apr 2019 15:52:26 +0100
David Howells <dhowells@redhat.com> wrote:

> There've been some changes that I've particularly objected to, such as
> removing contents lists from files and replacing them with markup like:
> 
> 	.. contents:: :local:
> 
> This actually impedes use of the file.  It should not be necessary to build
> the docs to get that for ordinary use.

Usability of the text files versus that of the built docs is occasionally
something that has to be traded off.  As a general rule, I want the text
files to remain useful on their own.  There is a lot of value in the
built docs for a lot of people, but that should not be the only, or even
the primary, form of access

Tables of contents are certainly a place where that tradeoff makes itself
felt.  Doing them by hand ensures that they are always present, but
requires that people editing the docs also maintain the TOCS - something
that experience has shown tends not to happen.  That's more of a pain
than a little bit of markup, and people don't do it.  An automatically
generated TOC, instead, is always correct and is linkable.

Few people complain about the biggest impediment to the readability of
text files, though: the use of kerneldoc comments.  That splits the
information between the text file and multiple random-seeming locations
among tends of thousands of source files.  Sometimes the solution here is
to move all of the documentation into the source, but that tends to
fragment it and make it harder to find; it's certainly not the right
place for many kinds of docs.  In general, it's hard to create a coherent
story that way.

Suggestions / patches on how to improve things for *all* users of the
docs are certainly welcome!

I am, incidentally, toying with the idea of trying to put together a
documentation microconf at the Linux Plumbers Conference this year.  If
anybody out there thinks that's a good idea and would like to
participate, please let me know.

> Anyway, the biggest doc issue in the kernel isn't addressed by the conversion
> to ReST: and that is that most people don't seem interested in documenting
> stuff - whether because writing documentation isn't as fun as writing code or
> the fact that English isn't their native language, I don't know.  I can
> sympathise more with the latter.

I believe there's enough experience now to say that using RST increases
contributions to the documentation.  Just having something that approaches
a coherent approach to docs (though we are a *long* way from that still)
makes the whole thing more accessible.  It doesn't solve our
documentation issues by any stretch, but it helps.

Thanks,

jon

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 56/79] docs: Documentation/*.txt: rename all ReST files to *.rst
  2019-04-23 16:54             ` Jonathan Corbet
@ 2019-04-23 17:12               ` Peter Zijlstra
  2019-04-23 20:26               ` Mauro Carvalho Chehab
  1 sibling, 0 replies; 124+ messages in thread
From: Peter Zijlstra @ 2019-04-23 17:12 UTC (permalink / raw)
  To: Jonathan Corbet
  Cc: David Howells, Mike Snitzer, Mauro Carvalho Chehab,
	Linux Doc Mailing List, linux-kernel, linux-arch

On Tue, Apr 23, 2019 at 10:54:15AM -0600, Jonathan Corbet wrote:
> Few people complain about the biggest impediment to the readability of
> text files, though: the use of kerneldoc comments.

I just stopped using kerneldoc.

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 61/79] docs: leds: convert to ReST
  2019-04-22 13:27   ` [PATCH v2 61/79] docs: leds: " Mauro Carvalho Chehab
@ 2019-04-23 19:00     ` Jacek Anaszewski
  0 siblings, 0 replies; 124+ messages in thread
From: Jacek Anaszewski @ 2019-04-23 19:00 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, linux-kernel, Jonathan Corbet,
	Vadim Pasternak, Pavel Machek, Pablo Neira Ayuso,
	Jozsef Kadlecsik, Florian Westphal, David S. Miller, linux-leds,
	netfilter-devel, coreteam, netdev

Hi Mauro,

Thank you for your effort.

On 4/22/19 3:27 PM, Mauro Carvalho Chehab wrote:
> Rename the leds documentation files to ReST, add an
> index for them and adjust in order to produce a nice html
> output via the Sphinx build system.
> 
> At its new index.rst, let's add a :orphan: while this is not linked to
> the main index.rst file, in order to avoid build warnings.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> ---
>   Documentation/laptops/thinkpad-acpi.txt       |   4 +-
>   Documentation/leds/index.rst                  |  25 ++
>   .../leds/{leds-blinkm.txt => leds-blinkm.rst} |  63 ++---
>   ...s-class-flash.txt => leds-class-flash.rst} |  49 ++--
>   .../leds/{leds-class.txt => leds-class.rst}   |  15 +-
>   .../leds/{leds-lm3556.txt => leds-lm3556.rst} | 100 ++++++--
>   .../leds/{leds-lp3944.txt => leds-lp3944.rst} |  23 +-
>   Documentation/leds/leds-lp5521.rst            | 115 +++++++++
>   Documentation/leds/leds-lp5521.txt            | 101 --------
>   Documentation/leds/leds-lp5523.rst            | 147 ++++++++++++
>   Documentation/leds/leds-lp5523.txt            | 130 ----------
>   Documentation/leds/leds-lp5562.rst            | 137 +++++++++++
>   Documentation/leds/leds-lp5562.txt            | 120 ----------
>   Documentation/leds/leds-lp55xx.rst            | 224 ++++++++++++++++++
>   Documentation/leds/leds-lp55xx.txt            | 194 ---------------
>   Documentation/leds/leds-mlxcpld.rst           | 118 +++++++++
>   Documentation/leds/leds-mlxcpld.txt           | 110 ---------
>   ...edtrig-oneshot.txt => ledtrig-oneshot.rst} |  11 +-
>   ...ig-transient.txt => ledtrig-transient.rst} |  63 +++--
>   ...edtrig-usbport.txt => ledtrig-usbport.rst} |  11 +-
>   Documentation/leds/{uleds.txt => uleds.rst}   |   5 +-
>   MAINTAINERS                                   |   2 +-
>   drivers/leds/trigger/Kconfig                  |   2 +-
>   drivers/leds/trigger/ledtrig-transient.c      |   2 +-
>   net/netfilter/Kconfig                         |   2 +-
>   25 files changed, 996 insertions(+), 777 deletions(-)
>   create mode 100644 Documentation/leds/index.rst
>   rename Documentation/leds/{leds-blinkm.txt => leds-blinkm.rst} (56%)
>   rename Documentation/leds/{leds-class-flash.txt => leds-class-flash.rst} (74%)
>   rename Documentation/leds/{leds-class.txt => leds-class.rst} (92%)
>   rename Documentation/leds/{leds-lm3556.txt => leds-lm3556.rst} (70%)
>   rename Documentation/leds/{leds-lp3944.txt => leds-lp3944.rst} (78%)
>   create mode 100644 Documentation/leds/leds-lp5521.rst
>   delete mode 100644 Documentation/leds/leds-lp5521.txt
>   create mode 100644 Documentation/leds/leds-lp5523.rst
>   delete mode 100644 Documentation/leds/leds-lp5523.txt
>   create mode 100644 Documentation/leds/leds-lp5562.rst
>   delete mode 100644 Documentation/leds/leds-lp5562.txt
>   create mode 100644 Documentation/leds/leds-lp55xx.rst
>   delete mode 100644 Documentation/leds/leds-lp55xx.txt
>   create mode 100644 Documentation/leds/leds-mlxcpld.rst
>   delete mode 100644 Documentation/leds/leds-mlxcpld.txt
>   rename Documentation/leds/{ledtrig-oneshot.txt => ledtrig-oneshot.rst} (90%)
>   rename Documentation/leds/{ledtrig-transient.txt => ledtrig-transient.rst} (81%)
>   rename Documentation/leds/{ledtrig-usbport.txt => ledtrig-usbport.rst} (86%)
>   rename Documentation/leds/{uleds.txt => uleds.rst} (95%)
> 
> diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
> index 3de3c95f01f6..65719384fc36 100644

Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

-- 
Best regards,
Jacek Anaszewski

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 56/79] docs: Documentation/*.txt: rename all ReST files to *.rst
  2019-04-23 14:52           ` [PATCH v2 56/79] docs: Documentation/*.txt: rename all ReST files to *.rst David Howells
  2019-04-23 16:54             ` Jonathan Corbet
@ 2019-04-23 19:37             ` Mauro Carvalho Chehab
  1 sibling, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-23 19:37 UTC (permalink / raw)
  To: David Howells
  Cc: Mike Snitzer, Peter Zijlstra, Jonathan Corbet,
	Linux Doc Mailing List, linux-kernel, linux-arch

Em Tue, 23 Apr 2019 15:52:26 +0100
David Howells <dhowells@redhat.com> escreveu:

> Mike Snitzer <snitzer@redhat.com> wrote:
> 
> > Peter Zijlstra <peterz@infradead.org> wrote:
> >   
> > > But yes, I have 0 motivation to learn or abide by rst. It simply doesn't
> > > give me anything in return. There is no upside, only worse text files :/  
> > 
> > Right, but these changes aren't meant for our benefit.  They are for
> > users who get cleaner web accessible Linux kernel docs.  Seems the
> > decision has been made that the users' benefit, and broader
> > modernization of Linux docs, outweighs the inconvenience for engineers
> > who maintain the content of said documentation.  
> 
> Whilst I can sympathise with Mauro and Jon - and appreciate the hard work
> they've put into this, I do think that the engineers dealing directly with the
> kernel code should be considered the primary audience.
> 
> There've been some changes that I've particularly objected to, such as
> removing contents lists from files and replacing them with markup like:
> 
> 	.. contents:: :local:

Actually, just:

	.. contents

Is enough. The goal here is just to avoid having two indexes when
generating an html output - and sometimes the internal contents index
is broken - I got one of these during this patch series: a very
confusing internal "contents" that doesn't really match the contents
of the file - probably because some patch changed the contents but
didn't update the internal index.

> 
> This actually impedes use of the file.  It should not be necessary to build
> the docs to get that for ordinary use.

IMHO, replacing:

	Contents

		1. Introduction
		...

By:


	.. Contents

		1. Introduction
		...

won't make the document harder to read as plain text file. With html 
output, the contents will be at both the index.html and at the lateral
bar, so the text "Contents" can be hidden (and that's what the two points
make: it transforms the block into a comment).

> 
> 
> Anyway, the biggest doc issue in the kernel isn't addressed by the conversion
> to ReST: and that is that most people don't seem interested in documenting
> stuff - whether because writing documentation isn't as fun as writing code or
> the fact that English isn't their native language, I don't know.  I can
> sympathise more with the latter.

Yeah, foreign people gets afraid on writing English documents. Yet, my
personal perception is that we end by getting more contributions once
the documents get converted, as more people end reading them and ends
by sending us more contributions.

> Kerneldoc is a start - and probably means that a lot of API functions are at
> least slightly documented - but too many APIs are not mentioned in the
> Documentation directory at all.  Remember: if you can't describe it, it's
> probably wrong!

Fully agreed.

> I'm not sure what we could do about this, but it would probably have to be
> imposed from the top: no more undocumented APIs.  Any new API must come with
> documentation; changes to APIs must include changes to the documentation.

This is a requirement on media: we don't accept for quite a while uAPI
changes without documentation, and we're doing the same for new kAPI
changes (although it is a little more complex to track kAPI changes).
 
> If you really want to upset people, you could add: anyone who wants to alter
> an already existing undocumented API must supply documentation for the whole
> API (but that could be considered a bit cruel).

Well, we may politely request that ;-) If it doesn't work, we can accept
documentation for just the new stuff.

> 
> And anyone who says "But the code is the documentation!" needs to consider
> carefully what happens to their code after it has been trampled, generalised,
> split, combined, renormalised, cthulhuised, janitorised and had parts of it
> migrate.

Yes, on a complex system like the Kernel, having just access to the code
is not enough, as developers don't usually have the time to read the code
for every single function call his code needs to use.

> 
> </rant>
> 
> And now, after that, I think a fresh cup of tea is called for!
> 
> David



Thanks,
Mauro

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 31/79] docs: s390: convert docs to ReST and rename to *.rst
  2019-04-23 16:12     ` Farhan Ali
@ 2019-04-23 19:46       ` Mauro Carvalho Chehab
  0 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-23 19:46 UTC (permalink / raw)
  To: Farhan Ali
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Martin Schwidefsky, Heiko Carstens,
	Tony Krowiak, Pierre Morel, Halil Pasic, Cornelia Huck,
	Eric Farman, linux-s390, kvm

Em Tue, 23 Apr 2019 12:12:41 -0400
Farhan Ali <alifm@linux.ibm.com> escreveu:

> On 04/22/2019 09:27 AM, Mauro Carvalho Chehab wrote:
> > Convert all text files with s390 documentation to ReST format.
> > 
> > Tried to preserve as much as possible the original document
> > format. Still, some of the files required some work in order
> > for it to be visible on both plain text and after converted
> > to html.
> > 
> > The conversion is actually:
> >    - add blank lines and identation in order to identify paragraphs;
> >    - fix tables markups;
> >    - add some lists markups;
> >    - mark literal blocks;
> >    - adjust title markups.
> > 
> > At its new index.rst, let's add a :orphan: while this is not linked to
> > the main index.rst file, in order to avoid build warnings.
> > 
> > Signed-off-by: Mauro Carvalho Chehab<mchehab+samsung@kernel.org>
> > ---  
> 
> Hi Mauro,
> 
> How would the s390 rst files be accessed from a top level index.rst 
> file? Is there a view of the changes? I looked at a link you posted [1] 
> as a reply in another thread, but I couldn't find the s390 docs there.
> 
> [1] https://www.infradead.org/~mchehab/rst_conversion/

With just the patch I added on this series, you'll find the s390
index.html, and one file for each .rst at Documentation/output/s390/.

In order to have it linked to the main index, you need to add
s390/index to Documentation/index.rst, but, if you just want to
see the results, you can just call:

	$ firefox file://`pwd`/Documentation/output/s390/index.html

I have a patch already that adds s390 to the main index, together with
other arch conversions:

	https://git.linuxtv.org/mchehab/experimental.git/commit/?h=convert_rst_renames&id=d28c466a495488e5e57c7893123011342eea40b2

However, as subsystem maintainers may take a while to apply some of those
patches, and there's a patchset converting x86 arch too, I opted to do
such additions on a separate patch, in order to reduce merge conflicts.

Thanks,
Mauro

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 56/79] docs: Documentation/*.txt: rename all ReST files to *.rst
  2019-04-23 16:54             ` Jonathan Corbet
  2019-04-23 17:12               ` Peter Zijlstra
@ 2019-04-23 20:26               ` Mauro Carvalho Chehab
  2019-04-24 11:51                 ` Mike Rapoport
  1 sibling, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-23 20:26 UTC (permalink / raw)
  To: Jonathan Corbet
  Cc: David Howells, Mike Snitzer, Peter Zijlstra,
	Linux Doc Mailing List, linux-kernel, linux-arch

Em Tue, 23 Apr 2019 10:54:15 -0600
Jonathan Corbet <corbet@lwn.net> escreveu:

> On Tue, 23 Apr 2019 15:52:26 +0100
> David Howells <dhowells@redhat.com> wrote:
> 
> > There've been some changes that I've particularly objected to, such as
> > removing contents lists from files and replacing them with markup like:
> > 
> > 	.. contents:: :local:
> > 
> > This actually impedes use of the file.  It should not be necessary to build
> > the docs to get that for ordinary use.  
> 
> Usability of the text files versus that of the built docs is occasionally
> something that has to be traded off.  As a general rule, I want the text
> files to remain useful on their own.  There is a lot of value in the
> built docs for a lot of people, but that should not be the only, or even
> the primary, form of access
> 
> Tables of contents are certainly a place where that tradeoff makes itself
> felt.  Doing them by hand ensures that they are always present, but
> requires that people editing the docs also maintain the TOCS - something
> that experience has shown tends not to happen.  That's more of a pain
> than a little bit of markup, and people don't do it.  An automatically
> generated TOC, instead, is always correct and is linkable.
> 
> Few people complain about the biggest impediment to the readability of
> text files, though: the use of kerneldoc comments.  That splits the
> information between the text file and multiple random-seeming locations
> among tends of thousands of source files.  Sometimes the solution here is
> to move all of the documentation into the source, but that tends to
> fragment it and make it harder to find; it's certainly not the right
> place for many kinds of docs.  In general, it's hard to create a coherent
> story that way.
> 
> Suggestions / patches on how to improve things for *all* users of the
> docs are certainly welcome!
> 
> I am, incidentally, toying with the idea of trying to put together a
> documentation microconf at the Linux Plumbers Conference this year.  If
> anybody out there thinks that's a good idea and would like to
> participate, please let me know.

If you add a microconf to LPC, I'm in. 

IMO, we made big advances with documentation, but there's a lot more
to be done. Having a microconf to discuss those things may help us
to bring new ideas about how to keep improving it.

Thanks,
Mauro

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 15/79] docs: gpio: convert docs to ReST and rename to *.rst
  2019-04-22 13:27   ` [PATCH v2 15/79] docs: gpio: " Mauro Carvalho Chehab
  2019-04-23 11:23     ` Linus Walleij
@ 2019-04-23 21:30     ` Linus Walleij
  1 sibling, 0 replies; 124+ messages in thread
From: Linus Walleij @ 2019-04-23 21:30 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Bartosz Golaszewski, open list:GPIO SUBSYSTEM

On Mon, Apr 22, 2019 at 3:28 PM Mauro Carvalho Chehab
<mchehab+samsung@kernel.org> wrote:

> The API described at sysfs.txt is deprecated.
>
> Still, as it is still part of the Kernel (and will likely be
> there for some time, as we don't simply remove APIs). So,
> it makes sense to keep it there.
>
> The conversion of this file is trivial:
>   - add blank lines and identation in order to identify paragraphs;
>   - mark a literal block as such.
>
> At its new index.rst, let's add a :orphan: while this is not linked to
> the main index.rst file, in order to avoid build warnings.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Patch applied to the GPIO tree.

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 26/79] docs: powerpc: convert docs to ReST and rename to *.rst
  2019-04-22 13:27   ` [PATCH v2 26/79] docs: powerpc: " Mauro Carvalho Chehab
@ 2019-04-24  1:15     ` Andrew Donnellan
  0 siblings, 0 replies; 124+ messages in thread
From: Andrew Donnellan @ 2019-04-24  1:15 UTC (permalink / raw)
  To: Mauro Carvalho Chehab, Linux Doc Mailing List
  Cc: Mauro Carvalho Chehab, linux-kernel, Jonathan Corbet,
	Bjorn Helgaas, Benjamin Herrenschmidt, Paul Mackerras,
	Michael Ellerman, Frederic Barrat, Manoj N. Kumar,
	Matthew R. Ochs, Uma Krishnan, Russell Currey, Sam Bobroff,
	Oliver O'Halloran, Qiang Zhao, Li Yang, Greg Kroah-Hartman,
	Jiri Slaby, linux-pci, linuxppc-dev, linux-scsi,
	linux-arm-kernel

On 22/4/19 11:27 pm, Mauro Carvalho Chehab wrote:
> Convert docs to ReST and add them to the arch-specific
> book.
> 
> The conversion here was trivial, as almost every file there
> was already using an elegant format close to ReST standard.
> 
> The changes were mostly to mark literal blocks and add a few
> missing section title identifiers.
> 
> One note with regards to "--": on Sphinx, this can't be used
> to identify a list, as it will format it badly. This can be
> used, however, to identify a long hyphen - and "---" is an
> even longer one.
> 
> At its new index.rst, let's add a :orphan: while this is not linked to
> the main index.rst file, in order to avoid build warnings.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>  # cxl

Minor possible improvement below, otherwise compiled output looks very nice.

> diff --git a/Documentation/powerpc/cxl.txt b/Documentation/powerpc/cxl.rst
> similarity index 95%
> rename from Documentation/powerpc/cxl.txt
> rename to Documentation/powerpc/cxl.rst
> index c5e8d5098ed3..99e704afb09d 100644
> --- a/Documentation/powerpc/cxl.txt
> +++ b/Documentation/powerpc/cxl.rst
> @@ -1,3 +1,4 @@
> +====================================
>   Coherent Accelerator Interface (CXL)
>   ====================================
>   
> @@ -21,6 +22,8 @@ Introduction
>   Hardware overview
>   =================
>   
> +    ::
> +
>            POWER8/9             FPGA
>          +----------+        +---------+
>          |          |        |         |
> @@ -59,14 +62,16 @@ Hardware overview
>       the fault. The context to which this fault is serviced is based on
>       who owns that acceleration function.
>   
> -    POWER8 <-----> PSL Version 8 is compliant to the CAIA Version 1.0.
> -    POWER9 <-----> PSL Version 9 is compliant to the CAIA Version 2.0.
> +    - POWER8 <------> PSL Version 8 is compliant to the CAIA Version 1.0.
> +    - POWER9 <------> PSL Version 9 is compliant to the CAIA Version 2.0.
> +

This could probably be changed to "POWER8 and PSL Version 8 are 
compliant" or something like that to avoid the ASCII art arrows turning 
into dashes. Happy to pick this up myself if I ever get around to 
revising the rest of the documentation.


-- 
Andrew Donnellan              OzLabs, ADL Canberra
andrew.donnellan@au1.ibm.com  IBM Australia Limited


^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 31/79] docs: s390: convert docs to ReST and rename to *.rst
  2019-04-22 13:27   ` [PATCH v2 31/79] docs: s390: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
  2019-04-23 16:12     ` Farhan Ali
@ 2019-04-24 11:41     ` Cornelia Huck
  2019-04-24 12:30       ` Heiko Carstens
  2019-04-24 12:44       ` Mauro Carvalho Chehab
  1 sibling, 2 replies; 124+ messages in thread
From: Cornelia Huck @ 2019-04-24 11:41 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Martin Schwidefsky, Heiko Carstens,
	Tony Krowiak, Pierre Morel, Halil Pasic, Farhan Ali, Eric Farman,
	linux-s390, kvm

On Mon, 22 Apr 2019 10:27:20 -0300
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> wrote:

> Convert all text files with s390 documentation to ReST format.
> 
> Tried to preserve as much as possible the original document
> format. Still, some of the files required some work in order
> for it to be visible on both plain text and after converted
> to html.
> 
> The conversion is actually:
>   - add blank lines and identation in order to identify paragraphs;
>   - fix tables markups;
>   - add some lists markups;
>   - mark literal blocks;
>   - adjust title markups.
> 
> At its new index.rst, let's add a :orphan: while this is not linked to
> the main index.rst file, in order to avoid build warnings.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> ---
>  .../admin-guide/kernel-parameters.txt         |    4 +-
>  Documentation/driver-api/s390-drivers.rst     |    4 +-
>  Documentation/s390/{3270.txt => 3270.rst}     |   85 +-
>  Documentation/s390/{cds.txt => cds.rst}       |  354 ++-
>  .../s390/{CommonIO => common_io.rst}          |   49 +-
>  Documentation/s390/{DASD => dasd.rst}         |   33 +-
>  .../{Debugging390.txt => debugging390.rst}    | 2389 ++++++++++-------
>  .../{driver-model.txt => driver-model.rst}    |  179 +-
>  Documentation/s390/index.rst                  |   30 +
>  .../s390/{monreader.txt => monreader.rst}     |   85 +-
>  Documentation/s390/{qeth.txt => qeth.rst}     |   36 +-
>  Documentation/s390/s390dbf.rst                |  803 ++++++
>  Documentation/s390/s390dbf.txt                |  667 -----
>  Documentation/s390/text_files.rst             |   11 +
>  .../s390/{vfio-ap.txt => vfio-ap.rst}         |  487 ++--
>  .../s390/{vfio-ccw.txt => vfio-ccw.rst}       |   90 +-
>  .../s390/{zfcpdump.txt => zfcpdump.rst}       |    2 +
>  MAINTAINERS                                   |    4 +-
>  arch/s390/Kconfig                             |    4 +-
>  arch/s390/include/asm/debug.h                 |    4 +-
>  drivers/s390/char/zcore.c                     |    2 +-
>  21 files changed, 3089 insertions(+), 2233 deletions(-)
>  rename Documentation/s390/{3270.txt => 3270.rst} (90%)
>  rename Documentation/s390/{cds.txt => cds.rst} (64%)
>  rename Documentation/s390/{CommonIO => common_io.rst} (87%)
>  rename Documentation/s390/{DASD => dasd.rst} (92%)
>  rename Documentation/s390/{Debugging390.txt => debugging390.rst} (53%)
>  rename Documentation/s390/{driver-model.txt => driver-model.rst} (73%)
>  create mode 100644 Documentation/s390/index.rst
>  rename Documentation/s390/{monreader.txt => monreader.rst} (81%)
>  rename Documentation/s390/{qeth.txt => qeth.rst} (62%)
>  create mode 100644 Documentation/s390/s390dbf.rst
>  delete mode 100644 Documentation/s390/s390dbf.txt
>  create mode 100644 Documentation/s390/text_files.rst
>  rename Documentation/s390/{vfio-ap.txt => vfio-ap.rst} (72%)
>  rename Documentation/s390/{vfio-ccw.txt => vfio-ccw.rst} (89%)
>  rename Documentation/s390/{zfcpdump.txt => zfcpdump.rst} (97%)
> 

(...)

> diff --git a/Documentation/s390/3270.txt b/Documentation/s390/3270.rst
> similarity index 90%
> rename from Documentation/s390/3270.txt
> rename to Documentation/s390/3270.rst
> index 7c715de99774..e09e77954238 100644
> --- a/Documentation/s390/3270.txt
> +++ b/Documentation/s390/3270.rst

(...)

> @@ -17,12 +21,12 @@ twenty and thirty years ago.
>  You may have 3270s in-house and not know it.  If you're using the
>  VM-ESA operating system, define a 3270 to your virtual machine by using
>  the command "DEF GRAF <hex-address>"  This paper presumes you will be
> -defining four 3270s with the CP/CMS commands
> +defining four 3270s with the CP/CMS commands:
>  
> -	DEF GRAF 620
> -	DEF GRAF 621
> -	DEF GRAF 622
> -	DEF GRAF 623
> +	- DEF GRAF 620
> +	- DEF GRAF 621
> +	- DEF GRAF 622
> +	- DEF GRAF 623

IIUC, this makes this into a bulleted list... but the user is supposed
to enter these commands (similar to the shell commands further down in
this file).

>  
>  Your network connection from VM-ESA allows you to use x3270, tn3270, or
>  another 3270 emulator, started from an xterm window on your PC or

(...)

> @@ -84,20 +92,22 @@ Here are the installation steps in detail:
>  		make modules_install
>  
>  	2. (Perform this step only if you have configured tub3270 as a
> -	module.)  Add a line to a file /etc/modprobe.d/*.conf to automatically
> +	module.)  Add a line to a file `/etc/modprobe.d/*.conf` to automatically
>  	load the driver when it's needed.  With this line added, you will see
>  	login prompts appear on your 3270s as soon as boot is complete (or
>  	with emulated 3270s, as soon as you dial into your vm guest using the
>  	command "DIAL <vmguestname>").  Since the line-mode major number is
> -	227, the line to add should be:
> +	227, the line to add should be::
> +
>  		alias char-major-227 tub3270
>  
>  	3. Define graphic devices to your vm guest machine, if you
>  	haven't already.  Define them before you reboot (reipl):
> -		DEFINE GRAF 620
> -		DEFINE GRAF 621
> -		DEFINE GRAF 622
> -		DEFINE GRAF 623
> +
> +		- DEFINE GRAF 620
> +		- DEFINE GRAF 621
> +		- DEFINE GRAF 622
> +		- DEFINE GRAF 623

Same here.

>  
>  	4. Reboot.  The reboot process scans hardware devices, including
>  	3270s, and this enables the tub3270 driver once loaded to respond

(...)


> diff --git a/Documentation/s390/CommonIO b/Documentation/s390/common_io.rst
> similarity index 87%
> rename from Documentation/s390/CommonIO
> rename to Documentation/s390/common_io.rst
> index 6e0f63f343b4..846485681ce7 100644
> --- a/Documentation/s390/CommonIO
> +++ b/Documentation/s390/common_io.rst
> @@ -1,5 +1,9 @@
> -S/390 common I/O-Layer - command line parameters, procfs and debugfs entries
> -============================================================================
> +======================
> +S/390 common I/O-Layer
> +======================
> +
> +command line parameters, procfs and debugfs entries
> +===================================================

I don't see why this should be split into two lines? If anything needs
to be changed, I'd drop the hyphen.

>  
>  Command line parameters
>  -----------------------
> @@ -13,7 +17,7 @@ Command line parameters
>  	device := {all | [!]ipldev | [!]condev | [!]<devno> | [!]<devno>-<devno>}
>  
>    The given devices will be ignored by the common I/O-layer; no detection
> -  and device sensing will be done on any of those devices. The subchannel to 
> +  and device sensing will be done on any of those devices. The subchannel to
>    which the device in question is attached will be treated as if no device was
>    attached.
>  
> @@ -28,14 +32,20 @@ Command line parameters
>    keywords can be used to refer to the CCW based boot device and CCW console
>    device respectively (these are probably useful only when combined with the '!'
>    operator). The '!' operator will cause the I/O-layer to _not_ ignore a device.
> -  The command line is parsed from left to right.
> +  The command line
> +  is parsed from left to right.

Why this change?

> +
> +  For example::
>  
> -  For example, 
>  	cio_ignore=0.0.0023-0.0.0042,0.0.4711
> +
>    will ignore all devices ranging from 0.0.0023 to 0.0.0042 and the device
>    0.0.4711, if detected.
> -  As another example,
> +
> +  As another example::
> +
>  	cio_ignore=all,!0.0.4711,!0.0.fd00-0.0.fd02
> +
>    will ignore all devices but 0.0.4711, 0.0.fd00, 0.0.fd01, 0.0.fd02.
>  
>    By default, no devices are ignored.

(...)

> diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/debugging390.rst
> similarity index 53%
> rename from Documentation/s390/Debugging390.txt
> rename to Documentation/s390/debugging390.rst
> index c35804c238ad..d49305fd5e1a 100644
> --- a/Documentation/s390/Debugging390.txt
> +++ b/Documentation/s390/debugging390.rst

I'll skip this one...

(Question for the s390 arch maintainers: I remember that there was some
interesting stuff in there, but I'm not sure how much of it is still
accurate/useful... is it worth spending time on trying to update this?)

(...)


> diff --git a/Documentation/s390/s390dbf.rst b/Documentation/s390/s390dbf.rst
> new file mode 100644
> index 000000000000..ec2a1faa414b
> --- /dev/null
> +++ b/Documentation/s390/s390dbf.rst

(...)

> diff --git a/Documentation/s390/s390dbf.txt b/Documentation/s390/s390dbf.txt
> deleted file mode 100644
> index 61329fd62e89..000000000000
> --- a/Documentation/s390/s390dbf.txt
> +++ /dev/null

I wonder why this does not show up as a rename?

(...)

> diff --git a/Documentation/s390/text_files.rst b/Documentation/s390/text_files.rst
> new file mode 100644
> index 000000000000..c94d05d4fa17
> --- /dev/null
> +++ b/Documentation/s390/text_files.rst
> @@ -0,0 +1,11 @@
> +ibm 3270 changelog
> +------------------
> +
> +.. include:: 3270.ChangeLog
> +    :literal:
> +
> +ibm 3270 config3270.sh
> +----------------------
> +
> +.. literalinclude:: config3270.sh
> +    :language: shell


Another question for the s390 arch maintainers: How valuable is this still?

(...)

> diff --git a/Documentation/s390/vfio-ccw.txt b/Documentation/s390/vfio-ccw.rst
> similarity index 89%
> rename from Documentation/s390/vfio-ccw.txt
> rename to Documentation/s390/vfio-ccw.rst
> index 2be11ad864ff..1f6d0b56d53e 100644
> --- a/Documentation/s390/vfio-ccw.txt
> +++ b/Documentation/s390/vfio-ccw.rst

(...)

> @@ -295,6 +321,6 @@ Reference
>  1. ESA/s390 Principles of Operation manual (IBM Form. No. SA22-7832)
>  2. ESA/390 Common I/O Device Commands manual (IBM Form. No. SA22-7204)
>  3. https://en.wikipedia.org/wiki/Channel_I/O
> -4. Documentation/s390/cds.txt
> +4. Documentation/s390/cds.rst
>  5. Documentation/vfio.txt
>  6. Documentation/vfio-mediated-device.txt

Are these two renamed in a later patch?

(...)

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 56/79] docs: Documentation/*.txt: rename all ReST files to *.rst
  2019-04-23 20:26               ` Mauro Carvalho Chehab
@ 2019-04-24 11:51                 ` Mike Rapoport
  2019-04-24 12:57                   ` Mauro Carvalho Chehab
  0 siblings, 1 reply; 124+ messages in thread
From: Mike Rapoport @ 2019-04-24 11:51 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Jonathan Corbet, David Howells, Mike Snitzer, Peter Zijlstra,
	Linux Doc Mailing List, linux-kernel, linux-arch

On Tue, Apr 23, 2019 at 05:26:41PM -0300, Mauro Carvalho Chehab wrote:
> Em Tue, 23 Apr 2019 10:54:15 -0600
> Jonathan Corbet <corbet@lwn.net> escreveu:
> 
> > On Tue, 23 Apr 2019 15:52:26 +0100
> > David Howells <dhowells@redhat.com> wrote:
> > 
> > Suggestions / patches on how to improve things for *all* users of the
> > docs are certainly welcome!
> > 
> > I am, incidentally, toying with the idea of trying to put together a
> > documentation microconf at the Linux Plumbers Conference this year.  If
> > anybody out there thinks that's a good idea and would like to
> > participate, please let me know.
> 
> If you add a microconf to LPC, I'm in. 

+1
 
> IMO, we made big advances with documentation, but there's a lot more
> to be done. Having a microconf to discuss those things may help us
> to bring new ideas about how to keep improving it.

The most difficult part, IMHO, is to convince people to document things ;-)
 
> Thanks,
> Mauro
> 

-- 
Sincerely yours,
Mike.


^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 31/79] docs: s390: convert docs to ReST and rename to *.rst
  2019-04-24 11:41     ` Cornelia Huck
@ 2019-04-24 12:30       ` Heiko Carstens
  2019-04-24 12:44       ` Mauro Carvalho Chehab
  1 sibling, 0 replies; 124+ messages in thread
From: Heiko Carstens @ 2019-04-24 12:30 UTC (permalink / raw)
  To: Cornelia Huck
  Cc: Mauro Carvalho Chehab, Linux Doc Mailing List,
	Mauro Carvalho Chehab, linux-kernel, Jonathan Corbet,
	Martin Schwidefsky, Tony Krowiak, Pierre Morel, Halil Pasic,
	Farhan Ali, Eric Farman, linux-s390, kvm

On Wed, Apr 24, 2019 at 01:41:09PM +0200, Cornelia Huck wrote:
> > diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/debugging390.rst
> > similarity index 53%
> > rename from Documentation/s390/Debugging390.txt
> > rename to Documentation/s390/debugging390.rst
> > index c35804c238ad..d49305fd5e1a 100644
> > --- a/Documentation/s390/Debugging390.txt
> > +++ b/Documentation/s390/debugging390.rst
> 
> I'll skip this one...
> 
> (Question for the s390 arch maintainers: I remember that there was some
> interesting stuff in there, but I'm not sure how much of it is still
> accurate/useful... is it worth spending time on trying to update this?)
> 
> > diff --git a/Documentation/s390/text_files.rst b/Documentation/s390/text_files.rst
> > new file mode 100644
> > index 000000000000..c94d05d4fa17
> > --- /dev/null
> > +++ b/Documentation/s390/text_files.rst
> > @@ -0,0 +1,11 @@
> > +ibm 3270 changelog
> > +------------------
> > +
> > +.. include:: 3270.ChangeLog
> > +    :literal:
> > +
> > +ibm 3270 config3270.sh
> > +----------------------
> > +
> > +.. literalinclude:: config3270.sh
> > +    :language: shell
> 
> 
> Another question for the s390 arch maintainers: How valuable is this still?

...to be honest I consider 80% within Documentation/s390 to be
completely outdated, partially wrong, or irrelevant in the meantime;
the vfio stuff seems to be pretty much up-to-date, and I like the
parts that move comments to code.

Cleaning this up can be done at a later time. I don't want to make
Mauro spend more time than necessary on this.


^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 31/79] docs: s390: convert docs to ReST and rename to *.rst
  2019-04-24 11:41     ` Cornelia Huck
  2019-04-24 12:30       ` Heiko Carstens
@ 2019-04-24 12:44       ` Mauro Carvalho Chehab
  2019-04-24 12:52         ` Cornelia Huck
  1 sibling, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-24 12:44 UTC (permalink / raw)
  To: Cornelia Huck
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Martin Schwidefsky, Heiko Carstens,
	Tony Krowiak, Pierre Morel, Halil Pasic, Farhan Ali, Eric Farman,
	linux-s390, kvm

Em Wed, 24 Apr 2019 13:41:09 +0200
Cornelia Huck <cohuck@redhat.com> escreveu:

> On Mon, 22 Apr 2019 10:27:20 -0300
> Mauro Carvalho Chehab <mchehab+samsung@kernel.org> wrote:
> 
> > Convert all text files with s390 documentation to ReST format.
> > 
> > Tried to preserve as much as possible the original document
> > format. Still, some of the files required some work in order
> > for it to be visible on both plain text and after converted
> > to html.
> > 
> > The conversion is actually:
> >   - add blank lines and identation in order to identify paragraphs;
> >   - fix tables markups;
> >   - add some lists markups;
> >   - mark literal blocks;
> >   - adjust title markups.
> > 
> > At its new index.rst, let's add a :orphan: while this is not linked to
> > the main index.rst file, in order to avoid build warnings.
> > 
> > Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> > ---
> >  .../admin-guide/kernel-parameters.txt         |    4 +-
> >  Documentation/driver-api/s390-drivers.rst     |    4 +-
> >  Documentation/s390/{3270.txt => 3270.rst}     |   85 +-
> >  Documentation/s390/{cds.txt => cds.rst}       |  354 ++-
> >  .../s390/{CommonIO => common_io.rst}          |   49 +-
> >  Documentation/s390/{DASD => dasd.rst}         |   33 +-
> >  .../{Debugging390.txt => debugging390.rst}    | 2389 ++++++++++-------
> >  .../{driver-model.txt => driver-model.rst}    |  179 +-
> >  Documentation/s390/index.rst                  |   30 +
> >  .../s390/{monreader.txt => monreader.rst}     |   85 +-
> >  Documentation/s390/{qeth.txt => qeth.rst}     |   36 +-
> >  Documentation/s390/s390dbf.rst                |  803 ++++++
> >  Documentation/s390/s390dbf.txt                |  667 -----
> >  Documentation/s390/text_files.rst             |   11 +
> >  .../s390/{vfio-ap.txt => vfio-ap.rst}         |  487 ++--
> >  .../s390/{vfio-ccw.txt => vfio-ccw.rst}       |   90 +-
> >  .../s390/{zfcpdump.txt => zfcpdump.rst}       |    2 +
> >  MAINTAINERS                                   |    4 +-
> >  arch/s390/Kconfig                             |    4 +-
> >  arch/s390/include/asm/debug.h                 |    4 +-
> >  drivers/s390/char/zcore.c                     |    2 +-
> >  21 files changed, 3089 insertions(+), 2233 deletions(-)
> >  rename Documentation/s390/{3270.txt => 3270.rst} (90%)
> >  rename Documentation/s390/{cds.txt => cds.rst} (64%)
> >  rename Documentation/s390/{CommonIO => common_io.rst} (87%)
> >  rename Documentation/s390/{DASD => dasd.rst} (92%)
> >  rename Documentation/s390/{Debugging390.txt => debugging390.rst} (53%)
> >  rename Documentation/s390/{driver-model.txt => driver-model.rst} (73%)
> >  create mode 100644 Documentation/s390/index.rst
> >  rename Documentation/s390/{monreader.txt => monreader.rst} (81%)
> >  rename Documentation/s390/{qeth.txt => qeth.rst} (62%)
> >  create mode 100644 Documentation/s390/s390dbf.rst
> >  delete mode 100644 Documentation/s390/s390dbf.txt
> >  create mode 100644 Documentation/s390/text_files.rst
> >  rename Documentation/s390/{vfio-ap.txt => vfio-ap.rst} (72%)
> >  rename Documentation/s390/{vfio-ccw.txt => vfio-ccw.rst} (89%)
> >  rename Documentation/s390/{zfcpdump.txt => zfcpdump.rst} (97%)
> >   
> 
> (...)
> 
> > diff --git a/Documentation/s390/3270.txt b/Documentation/s390/3270.rst
> > similarity index 90%
> > rename from Documentation/s390/3270.txt
> > rename to Documentation/s390/3270.rst
> > index 7c715de99774..e09e77954238 100644
> > --- a/Documentation/s390/3270.txt
> > +++ b/Documentation/s390/3270.rst  
> 
> (...)
> 
> > @@ -17,12 +21,12 @@ twenty and thirty years ago.
> >  You may have 3270s in-house and not know it.  If you're using the
> >  VM-ESA operating system, define a 3270 to your virtual machine by using
> >  the command "DEF GRAF <hex-address>"  This paper presumes you will be
> > -defining four 3270s with the CP/CMS commands
> > +defining four 3270s with the CP/CMS commands:
> >  
> > -	DEF GRAF 620
> > -	DEF GRAF 621
> > -	DEF GRAF 622
> > -	DEF GRAF 623
> > +	- DEF GRAF 620
> > +	- DEF GRAF 621
> > +	- DEF GRAF 622
> > +	- DEF GRAF 623  
> 
> IIUC, this makes this into a bulleted list... but the user is supposed
> to enter these commands (similar to the shell commands further down in
> this file).

Ah, OK! I'll change it to use a literal block (::).

> 
> >  
> >  Your network connection from VM-ESA allows you to use x3270, tn3270, or
> >  another 3270 emulator, started from an xterm window on your PC or  
> 
> (...)
> 
> > @@ -84,20 +92,22 @@ Here are the installation steps in detail:
> >  		make modules_install
> >  
> >  	2. (Perform this step only if you have configured tub3270 as a
> > -	module.)  Add a line to a file /etc/modprobe.d/*.conf to automatically
> > +	module.)  Add a line to a file `/etc/modprobe.d/*.conf` to automatically
> >  	load the driver when it's needed.  With this line added, you will see
> >  	login prompts appear on your 3270s as soon as boot is complete (or
> >  	with emulated 3270s, as soon as you dial into your vm guest using the
> >  	command "DIAL <vmguestname>").  Since the line-mode major number is
> > -	227, the line to add should be:
> > +	227, the line to add should be::
> > +
> >  		alias char-major-227 tub3270
> >  
> >  	3. Define graphic devices to your vm guest machine, if you
> >  	haven't already.  Define them before you reboot (reipl):
> > -		DEFINE GRAF 620
> > -		DEFINE GRAF 621
> > -		DEFINE GRAF 622
> > -		DEFINE GRAF 623
> > +
> > +		- DEFINE GRAF 620
> > +		- DEFINE GRAF 621
> > +		- DEFINE GRAF 622
> > +		- DEFINE GRAF 623  
> 
> Same here.

Ok.

> 
> >  
> >  	4. Reboot.  The reboot process scans hardware devices, including
> >  	3270s, and this enables the tub3270 driver once loaded to respond  
> 
> (...)
> 
> 
> > diff --git a/Documentation/s390/CommonIO b/Documentation/s390/common_io.rst
> > similarity index 87%
> > rename from Documentation/s390/CommonIO
> > rename to Documentation/s390/common_io.rst
> > index 6e0f63f343b4..846485681ce7 100644
> > --- a/Documentation/s390/CommonIO
> > +++ b/Documentation/s390/common_io.rst
> > @@ -1,5 +1,9 @@
> > -S/390 common I/O-Layer - command line parameters, procfs and debugfs entries
> > -============================================================================
> > +======================
> > +S/390 common I/O-Layer
> > +======================
> > +
> > +command line parameters, procfs and debugfs entries
> > +===================================================  
> 
> I don't see why this should be split into two lines? If anything needs
> to be changed, I'd drop the hyphen.

No real need for html output. I suspect that a big title like the
above would cause troubles for pdf output. That's basically why I opted
to break it.

Yet, if you prefer, I'll keep it as-is.

> 
> >  
> >  Command line parameters
> >  -----------------------
> > @@ -13,7 +17,7 @@ Command line parameters
> >  	device := {all | [!]ipldev | [!]condev | [!]<devno> | [!]<devno>-<devno>}
> >  
> >    The given devices will be ignored by the common I/O-layer; no detection
> > -  and device sensing will be done on any of those devices. The subchannel to 
> > +  and device sensing will be done on any of those devices. The subchannel to
> >    which the device in question is attached will be treated as if no device was
> >    attached.
> >  
> > @@ -28,14 +32,20 @@ Command line parameters
> >    keywords can be used to refer to the CCW based boot device and CCW console
> >    device respectively (these are probably useful only when combined with the '!'
> >    operator). The '!' operator will cause the I/O-layer to _not_ ignore a device.
> > -  The command line is parsed from left to right.
> > +  The command line
> > +  is parsed from left to right.  
> 
> Why this change?

This was unintentional. I probably hit <enter> by mistake on that line.

I'll revert.

> 
> > +
> > +  For example::
> >  
> > -  For example, 
> >  	cio_ignore=0.0.0023-0.0.0042,0.0.4711
> > +
> >    will ignore all devices ranging from 0.0.0023 to 0.0.0042 and the device
> >    0.0.4711, if detected.
> > -  As another example,
> > +
> > +  As another example::
> > +
> >  	cio_ignore=all,!0.0.4711,!0.0.fd00-0.0.fd02
> > +
> >    will ignore all devices but 0.0.4711, 0.0.fd00, 0.0.fd01, 0.0.fd02.
> >  
> >    By default, no devices are ignored.  
> 
> (...)
> 
> > diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/debugging390.rst
> > similarity index 53%
> > rename from Documentation/s390/Debugging390.txt
> > rename to Documentation/s390/debugging390.rst
> > index c35804c238ad..d49305fd5e1a 100644
> > --- a/Documentation/s390/Debugging390.txt
> > +++ b/Documentation/s390/debugging390.rst  
> 
> I'll skip this one...
> 
> (Question for the s390 arch maintainers: I remember that there was some
> interesting stuff in there, but I'm not sure how much of it is still
> accurate/useful... is it worth spending time on trying to update this?)
> 
> (...)
> 
> 
> > diff --git a/Documentation/s390/s390dbf.rst b/Documentation/s390/s390dbf.rst
> > new file mode 100644
> > index 000000000000..ec2a1faa414b
> > --- /dev/null
> > +++ b/Documentation/s390/s390dbf.rst  
> 
> (...)
> 
> > diff --git a/Documentation/s390/s390dbf.txt b/Documentation/s390/s390dbf.txt
> > deleted file mode 100644
> > index 61329fd62e89..000000000000
> > --- a/Documentation/s390/s390dbf.txt
> > +++ /dev/null  
> 
> I wonder why this does not show up as a rename?

Probably because the number of changes were bigger than 50%. The algo
there seems to be dumb. I suspect that adding whitespace/tabs on lines
makes it to consider the entire line as different. 

git log -M10 would change the threshold to 10% similarity and will
likely show it as a rename. I'll use -M on the next version for this
patch.

> 
> (...)
> 
> > diff --git a/Documentation/s390/text_files.rst b/Documentation/s390/text_files.rst
> > new file mode 100644
> > index 000000000000..c94d05d4fa17
> > --- /dev/null
> > +++ b/Documentation/s390/text_files.rst
> > @@ -0,0 +1,11 @@
> > +ibm 3270 changelog
> > +------------------
> > +
> > +.. include:: 3270.ChangeLog
> > +    :literal:
> > +
> > +ibm 3270 config3270.sh
> > +----------------------
> > +
> > +.. literalinclude:: config3270.sh
> > +    :language: shell  
> 
> 
> Another question for the s390 arch maintainers: How valuable is this still?
> 
> (...)
> 
> > diff --git a/Documentation/s390/vfio-ccw.txt b/Documentation/s390/vfio-ccw.rst
> > similarity index 89%
> > rename from Documentation/s390/vfio-ccw.txt
> > rename to Documentation/s390/vfio-ccw.rst
> > index 2be11ad864ff..1f6d0b56d53e 100644
> > --- a/Documentation/s390/vfio-ccw.txt
> > +++ b/Documentation/s390/vfio-ccw.rst  
> 
> (...)
> 
> > @@ -295,6 +321,6 @@ Reference
> >  1. ESA/s390 Principles of Operation manual (IBM Form. No. SA22-7832)
> >  2. ESA/390 Common I/O Device Commands manual (IBM Form. No. SA22-7204)
> >  3. https://en.wikipedia.org/wiki/Channel_I/O
> > -4. Documentation/s390/cds.txt
> > +4. Documentation/s390/cds.rst

> >  5. Documentation/vfio.txt
> >  6. Documentation/vfio-mediated-device.txt  
> 
> Are these two renamed in a later patch?

Yes. Patch 56 renames almost all Documentation/*.txt to .rst. Those files
are already parsed properly by Sphinx, so no changes there are needed.

I'm working on followup patches (not submitted yet), with moves all
ReST files under Documentation to some place.

In the specific case of those files, on the series I'm working,
I moved them to be part of the driver-api:

	https://git.linuxtv.org/mchehab/experimental.git/commit/?h=convert_rst_renames&id=3387ab063cf43f91d5c0f79d741244e7dbcdec05

The results, when parsed, are at:

	https://www.infradead.org/~mchehab/rst_conversion/driver-api/vfio.html
	https://www.infradead.org/~mchehab/rst_conversion/driver-api/vfio-mediated-device.html

Thanks,
Mauro

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 31/79] docs: s390: convert docs to ReST and rename to *.rst
  2019-04-24 12:44       ` Mauro Carvalho Chehab
@ 2019-04-24 12:52         ` Cornelia Huck
  0 siblings, 0 replies; 124+ messages in thread
From: Cornelia Huck @ 2019-04-24 12:52 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Martin Schwidefsky, Heiko Carstens,
	Tony Krowiak, Pierre Morel, Halil Pasic, Farhan Ali, Eric Farman,
	linux-s390, kvm

On Wed, 24 Apr 2019 09:44:50 -0300
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> wrote:

> Em Wed, 24 Apr 2019 13:41:09 +0200
> Cornelia Huck <cohuck@redhat.com> escreveu:
> 
> > On Mon, 22 Apr 2019 10:27:20 -0300
> > Mauro Carvalho Chehab <mchehab+samsung@kernel.org> wrote:
> >   
> > > Convert all text files with s390 documentation to ReST format.
> > > 
> > > Tried to preserve as much as possible the original document
> > > format. Still, some of the files required some work in order
> > > for it to be visible on both plain text and after converted
> > > to html.
> > > 
> > > The conversion is actually:
> > >   - add blank lines and identation in order to identify paragraphs;
> > >   - fix tables markups;
> > >   - add some lists markups;
> > >   - mark literal blocks;
> > >   - adjust title markups.
> > > 
> > > At its new index.rst, let's add a :orphan: while this is not linked to
> > > the main index.rst file, in order to avoid build warnings.
> > > 
> > > Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> > > ---
> > >  .../admin-guide/kernel-parameters.txt         |    4 +-
> > >  Documentation/driver-api/s390-drivers.rst     |    4 +-
> > >  Documentation/s390/{3270.txt => 3270.rst}     |   85 +-
> > >  Documentation/s390/{cds.txt => cds.rst}       |  354 ++-
> > >  .../s390/{CommonIO => common_io.rst}          |   49 +-
> > >  Documentation/s390/{DASD => dasd.rst}         |   33 +-
> > >  .../{Debugging390.txt => debugging390.rst}    | 2389 ++++++++++-------
> > >  .../{driver-model.txt => driver-model.rst}    |  179 +-
> > >  Documentation/s390/index.rst                  |   30 +
> > >  .../s390/{monreader.txt => monreader.rst}     |   85 +-
> > >  Documentation/s390/{qeth.txt => qeth.rst}     |   36 +-
> > >  Documentation/s390/s390dbf.rst                |  803 ++++++
> > >  Documentation/s390/s390dbf.txt                |  667 -----
> > >  Documentation/s390/text_files.rst             |   11 +
> > >  .../s390/{vfio-ap.txt => vfio-ap.rst}         |  487 ++--
> > >  .../s390/{vfio-ccw.txt => vfio-ccw.rst}       |   90 +-
> > >  .../s390/{zfcpdump.txt => zfcpdump.rst}       |    2 +
> > >  MAINTAINERS                                   |    4 +-
> > >  arch/s390/Kconfig                             |    4 +-
> > >  arch/s390/include/asm/debug.h                 |    4 +-
> > >  drivers/s390/char/zcore.c                     |    2 +-
> > >  21 files changed, 3089 insertions(+), 2233 deletions(-)
> > >  rename Documentation/s390/{3270.txt => 3270.rst} (90%)
> > >  rename Documentation/s390/{cds.txt => cds.rst} (64%)
> > >  rename Documentation/s390/{CommonIO => common_io.rst} (87%)
> > >  rename Documentation/s390/{DASD => dasd.rst} (92%)
> > >  rename Documentation/s390/{Debugging390.txt => debugging390.rst} (53%)
> > >  rename Documentation/s390/{driver-model.txt => driver-model.rst} (73%)
> > >  create mode 100644 Documentation/s390/index.rst
> > >  rename Documentation/s390/{monreader.txt => monreader.rst} (81%)
> > >  rename Documentation/s390/{qeth.txt => qeth.rst} (62%)
> > >  create mode 100644 Documentation/s390/s390dbf.rst
> > >  delete mode 100644 Documentation/s390/s390dbf.txt
> > >  create mode 100644 Documentation/s390/text_files.rst
> > >  rename Documentation/s390/{vfio-ap.txt => vfio-ap.rst} (72%)
> > >  rename Documentation/s390/{vfio-ccw.txt => vfio-ccw.rst} (89%)
> > >  rename Documentation/s390/{zfcpdump.txt => zfcpdump.rst} (97%)
> > >     
> > 
> > (...)
> >   
> > > diff --git a/Documentation/s390/3270.txt b/Documentation/s390/3270.rst
> > > similarity index 90%
> > > rename from Documentation/s390/3270.txt
> > > rename to Documentation/s390/3270.rst
> > > index 7c715de99774..e09e77954238 100644
> > > --- a/Documentation/s390/3270.txt
> > > +++ b/Documentation/s390/3270.rst    
> > 
> > (...)
> >   
> > > @@ -17,12 +21,12 @@ twenty and thirty years ago.
> > >  You may have 3270s in-house and not know it.  If you're using the
> > >  VM-ESA operating system, define a 3270 to your virtual machine by using
> > >  the command "DEF GRAF <hex-address>"  This paper presumes you will be
> > > -defining four 3270s with the CP/CMS commands
> > > +defining four 3270s with the CP/CMS commands:
> > >  
> > > -	DEF GRAF 620
> > > -	DEF GRAF 621
> > > -	DEF GRAF 622
> > > -	DEF GRAF 623
> > > +	- DEF GRAF 620
> > > +	- DEF GRAF 621
> > > +	- DEF GRAF 622
> > > +	- DEF GRAF 623    
> > 
> > IIUC, this makes this into a bulleted list... but the user is supposed
> > to enter these commands (similar to the shell commands further down in
> > this file).  
> 
> Ah, OK! I'll change it to use a literal block (::).

Sounds good.


> > > diff --git a/Documentation/s390/CommonIO b/Documentation/s390/common_io.rst
> > > similarity index 87%
> > > rename from Documentation/s390/CommonIO
> > > rename to Documentation/s390/common_io.rst
> > > index 6e0f63f343b4..846485681ce7 100644
> > > --- a/Documentation/s390/CommonIO
> > > +++ b/Documentation/s390/common_io.rst
> > > @@ -1,5 +1,9 @@
> > > -S/390 common I/O-Layer - command line parameters, procfs and debugfs entries
> > > -============================================================================
> > > +======================
> > > +S/390 common I/O-Layer
> > > +======================
> > > +
> > > +command line parameters, procfs and debugfs entries
> > > +===================================================    
> > 
> > I don't see why this should be split into two lines? If anything needs
> > to be changed, I'd drop the hyphen.  
> 
> No real need for html output. I suspect that a big title like the
> above would cause troubles for pdf output. That's basically why I opted
> to break it.
> 
> Yet, if you prefer, I'll keep it as-is.

I basically find the short title confusing (the file is not about the
common I/O layer as a whole, but only about parameters etc.)

Maybe "S/390 common I/O layer user interface"?

But I don't care about this deeply :)

> > > diff --git a/Documentation/s390/vfio-ccw.txt b/Documentation/s390/vfio-ccw.rst
> > > similarity index 89%
> > > rename from Documentation/s390/vfio-ccw.txt
> > > rename to Documentation/s390/vfio-ccw.rst
> > > index 2be11ad864ff..1f6d0b56d53e 100644
> > > --- a/Documentation/s390/vfio-ccw.txt
> > > +++ b/Documentation/s390/vfio-ccw.rst    
> > 
> > (...)
> >   
> > > @@ -295,6 +321,6 @@ Reference
> > >  1. ESA/s390 Principles of Operation manual (IBM Form. No. SA22-7832)
> > >  2. ESA/390 Common I/O Device Commands manual (IBM Form. No. SA22-7204)
> > >  3. https://en.wikipedia.org/wiki/Channel_I/O
> > > -4. Documentation/s390/cds.txt
> > > +4. Documentation/s390/cds.rst  
> 
> > >  5. Documentation/vfio.txt
> > >  6. Documentation/vfio-mediated-device.txt    
> > 
> > Are these two renamed in a later patch?  
> 
> Yes. Patch 56 renames almost all Documentation/*.txt to .rst. Those files
> are already parsed properly by Sphinx, so no changes there are needed.
> 
> I'm working on followup patches (not submitted yet), with moves all
> ReST files under Documentation to some place.
> 
> In the specific case of those files, on the series I'm working,
> I moved them to be part of the driver-api:
> 
> 	https://git.linuxtv.org/mchehab/experimental.git/commit/?h=convert_rst_renames&id=3387ab063cf43f91d5c0f79d741244e7dbcdec05
> 
> The results, when parsed, are at:
> 
> 	https://www.infradead.org/~mchehab/rst_conversion/driver-api/vfio.html
> 	https://www.infradead.org/~mchehab/rst_conversion/driver-api/vfio-mediated-device.html

Sounds good!

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 56/79] docs: Documentation/*.txt: rename all ReST files to *.rst
  2019-04-24 11:51                 ` Mike Rapoport
@ 2019-04-24 12:57                   ` Mauro Carvalho Chehab
  0 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-24 12:57 UTC (permalink / raw)
  To: Mike Rapoport
  Cc: Jonathan Corbet, David Howells, Mike Snitzer, Peter Zijlstra,
	Linux Doc Mailing List, linux-kernel, linux-arch

Em Wed, 24 Apr 2019 14:51:26 +0300
Mike Rapoport <rppt@linux.ibm.com> escreveu:

> On Tue, Apr 23, 2019 at 05:26:41PM -0300, Mauro Carvalho Chehab wrote:
> > Em Tue, 23 Apr 2019 10:54:15 -0600
> > Jonathan Corbet <corbet@lwn.net> escreveu:
> > 
> > > On Tue, 23 Apr 2019 15:52:26 +0100
> > > David Howells <dhowells@redhat.com> wrote:
> > > 
> > > Suggestions / patches on how to improve things for *all* users of the
> > > docs are certainly welcome!
> > > 
> > > I am, incidentally, toying with the idea of trying to put together a
> > > documentation microconf at the Linux Plumbers Conference this year.  If
> > > anybody out there thinks that's a good idea and would like to
> > > participate, please let me know.
> > 
> > If you add a microconf to LPC, I'm in. 
> 
> +1
>  
> > IMO, we made big advances with documentation, but there's a lot more
> > to be done. Having a microconf to discuss those things may help us
> > to bring new ideas about how to keep improving it.
> 
> The most difficult part, IMHO, is to convince people to document things ;-)

As David mentioned, maintainers could enforce merging new APIs
only with documentation, with the risk of being unpopular. 

Well, maintainers are not among the most loved ones anyway ;-)
<sarcasm/>

My experience enforcing it at media subsystem is that it is not
that hard to have developers writing documentation, once it
becomes a rule, and the maintainers give the example.

The big problem is how to deal with legacy stuff. I had to do that
myself for the DVB subsystem, where the documentation were frozen back 
on 2002 days, while lots of new stuff got added (and, worse than that,
with some very obscure ioctls that is used only by a single driver and
some that were used only by OOT drivers). 

It take a few years to put it in sync with the code, but, once the 
ReST conversion was done, it became easier to do the work.

Thanks,
Mauro

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 02/79] docs: trace: fix some Sphinx warnings
  2019-04-22 13:26   ` [PATCH v2 02/79] docs: trace: fix some Sphinx warnings Mauro Carvalho Chehab
@ 2019-04-24 15:10     ` Steven Rostedt
  0 siblings, 0 replies; 124+ messages in thread
From: Steven Rostedt @ 2019-04-24 15:10 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Ingo Molnar

On Mon, 22 Apr 2019 10:26:51 -0300
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> wrote:

> There are some warnings produced when building trace. Fix them.
> 

I guess I'm fine with this (I just read the text file as is).

Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

-- Steve

> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> ---
>  Documentation/trace/ftrace.rst    |  1 +
>  Documentation/trace/histogram.rst | 86 ++++++++++++++++---------------
>  2 files changed, 45 insertions(+), 42 deletions(-)
> 

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 25/79] docs: convert docs to ReST and rename to *.rst
  2019-04-22 13:27   ` [PATCH v2 25/79] docs: " Mauro Carvalho Chehab
  2019-04-22 13:48     ` Bjorn Helgaas
@ 2019-04-25 18:07     ` Mark Brown
  2019-04-26  9:46       ` Mauro Carvalho Chehab
  1 sibling, 1 reply; 124+ messages in thread
From: Mark Brown @ 2019-04-25 18:07 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Sebastian Reichel, Bjorn Helgaas,
	Rafael J. Wysocki, Viresh Kumar, Len Brown, Pavel Machek,
	Nishanth Menon, Stephen Boyd, Liam Girdwood, Mathieu Poirier,
	Suzuki K Poulose, Harry Wei, Alex Shi, Thomas Gleixner,
	Ingo Molnar, Borislav Petkov, H. Peter Anvin, x86, Jani Nikula,
	Joonas Lahtinen, Rodrigo Vivi, David Airlie, Daniel Vetter,
	Johannes Berg, David S. Miller, linux-pm, linux-pci,
	linux-arm-kernel, intel-gfx, dri-devel, linux-wireless, netdev

[-- Attachment #1: Type: text/plain, Size: 315 bytes --]

On Mon, Apr 22, 2019 at 10:27:14AM -0300, Mauro Carvalho Chehab wrote:
> Convert the PM documents to ReST, in order to allow them to
> build with Sphinx.

This is massively CCed covering a large range of subsystems and is patch
25 of a 79 patch series so I've no context for what's going on here or
why...  

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 20/79] docs: livepatch: convert docs to ReST and rename to *.rst
  2019-04-22 13:27   ` [PATCH v2 20/79] docs: livepatch: " Mauro Carvalho Chehab
@ 2019-04-26  8:10     ` Petr Mladek
  2019-04-26  9:04       ` Mauro Carvalho Chehab
  0 siblings, 1 reply; 124+ messages in thread
From: Petr Mladek @ 2019-04-26  8:10 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Josh Poimboeuf, Jiri Kosina, Miroslav Benes,
	Joe Lawrence, Peter Zijlstra, live-patching

On Mon 2019-04-22 10:27:09, Mauro Carvalho Chehab wrote:
> Convert livepatch documentation to ReST format. The changes
> are mostly trivial, as the documents are already on a good
> shape. Just a few markup changes are needed for Sphinx to
> properly parse the docs.
> 
> The conversion is actually:
>   - add blank lines and identation in order to identify paragraphs;
>   - fix tables markups;
>   - add some lists markups;
>   - mark literal blocks;
>   - The in-file TOC becomes a comment, in order to skip it from the
>     output, as Sphinx already generates an index there.
>   - adjust title markups.
> 
> At its new index.rst, let's add a :orphan: while this is not linked to
> the main index.rst file, in order to avoid build warnings.

Thanks a lot for the conversion.

It made me to review style of all documents. I would like add
the following changes to make them more consistent.

I can added as extra patch or merged with your one.
Whatewer works better for you or documentation people.


From 4cecbde44205ba4a9f777cac33ef3469cd46e7f2 Mon Sep 17 00:00:00 2001
From: Petr Mladek <pmladek@suse.com>
Date: Thu, 25 Apr 2019 16:58:21 +0200
Subject: [PATCH] docs/livepatch: Unify style of livepatch documentation in the
 ReST format

Make the structure of "Livepatch module Elf format" document similar
to the main "Livepatch" document.

Also make the structure of "(Un)patching Callbacks" document similar
to the "Shadow Variables" document.

It fixes the most visible inconsistencies of the documentation
generated from the ReST format.

Signed-off-by: Petr Mladek <pmladek@suse.com>
---
 Documentation/livepatch/callbacks.rst         |  33 ++---
 Documentation/livepatch/module-elf-format.rst | 186 ++++++++++++--------------
 2 files changed, 104 insertions(+), 115 deletions(-)

diff --git a/Documentation/livepatch/callbacks.rst b/Documentation/livepatch/callbacks.rst
index d76d1f0d9fcf..470944aa8658 100644
--- a/Documentation/livepatch/callbacks.rst
+++ b/Documentation/livepatch/callbacks.rst
@@ -4,7 +4,7 @@
 
 Livepatch (un)patch-callbacks provide a mechanism for livepatch modules
 to execute callback functions when a kernel object is (un)patched.  They
-can be considered a "power feature" that extends livepatching abilities
+can be considered a **power feature** that **extends livepatching abilities**
 to include:
 
   - Safe updates to global data
@@ -17,6 +17,9 @@ In most cases, (un)patch callbacks will need to be used in conjunction
 with memory barriers and kernel synchronization primitives, like
 mutexes/spinlocks, or even stop_machine(), to avoid concurrency issues.
 
+1. Motivation
+=============
+
 Callbacks differ from existing kernel facilities:
 
   - Module init/exit code doesn't run when disabling and re-enabling a
@@ -28,6 +31,9 @@ Callbacks are part of the klp_object structure and their implementation
 is specific to that klp_object.  Other livepatch objects may or may not
 be patched, irrespective of the target klp_object's current state.
 
+2. Callback types
+=================
+
 Callbacks can be registered for the following livepatch actions:
 
   * Pre-patch
@@ -47,6 +53,9 @@ be patched, irrespective of the target klp_object's current state.
                    been restored and no tasks are running patched code,
                    used to cleanup pre-patch callback resources
 
+3. How it works
+===============
+
 Each callback is optional, omitting one does not preclude specifying any
 other.  However, the livepatching core executes the handlers in
 symmetry: pre-patch callbacks have a post-unpatch counterpart and
@@ -90,11 +99,14 @@ If the object did successfully patch, but the patch transition never
 started for some reason (e.g., if another object failed to patch),
 only the post-unpatch callback will be called.
 
+4. Use cases
+============
 
-Example Use-cases
-=================
+Sample livepatch modules demonstrating the callback API can be found in
+samples/livepatch/ directory.  These samples were modified for use in
+kselftests and can be found in the lib/livepatch directory.
 
-Update global data
+Global data update
 ------------------
 
 A pre-patch callback can be useful to update a global variable.  For
@@ -107,24 +119,15 @@ patch the data *after* patching is complete with a post-patch callback,
 so that tcp_send_challenge_ack() could first be changed to read
 sysctl_tcp_challenge_ack_limit with READ_ONCE.
 
-
-Support __init and probe function patches
+__init and probe function patches support
 -----------------------------------------
 
 Although __init and probe functions are not directly livepatch-able, it
 may be possible to implement similar updates via pre/post-patch
 callbacks.
 
-48900cb6af42 ("virtio-net: drop NETIF_F_FRAGLIST") change the way that
+The commit ``48900cb6af42 ("virtio-net: drop NETIF_F_FRAGLIST")`` change the way that
 virtnet_probe() initialized its driver's net_device features.  A
 pre/post-patch callback could iterate over all such devices, making a
 similar change to their hw_features value.  (Client functions of the
 value may need to be updated accordingly.)
-
-
-Other Examples
-==============
-
-Sample livepatch modules demonstrating the callback API can be found in
-samples/livepatch/ directory.  These samples were modified for use in
-kselftests and can be found in the lib/livepatch directory.
diff --git a/Documentation/livepatch/module-elf-format.rst b/Documentation/livepatch/module-elf-format.rst
index 7f557c6f6deb..2a591e6f8e6c 100644
--- a/Documentation/livepatch/module-elf-format.rst
+++ b/Documentation/livepatch/module-elf-format.rst
@@ -7,30 +7,18 @@ This document outlines the Elf format requirements that livepatch modules must f
 
 .. Table of Contents
 
-   0. Background and motivation
-   1. Livepatch modinfo field
-   2. Livepatch relocation sections
-      2.1 What are livepatch relocation sections?
-      2.2 Livepatch relocation section format
-          2.2.1 Required flags
-          2.2.2 Required name format
-          2.2.3 Example livepatch relocation section names
-          2.2.4 Example `readelf --sections` output
-          2.2.5 Example `readelf --relocs` output
-   3. Livepatch symbols
-      3.1 What are livepatch symbols?
-      3.2 A livepatch module's symbol table
-      3.3 Livepatch symbol format
-          3.3.1 Required flags
-          3.3.2 Required name format
-          3.3.3 Example livepatch symbol names
-          3.3.4 Example `readelf --symbols` output
-   4. Architecture-specific sections
-   5. Symbol table and Elf section access
-
-----------------------------
-0. Background and motivation
-----------------------------
+   1. Background and motivation
+   2. Livepatch modinfo field
+   3. Livepatch relocation sections
+      3.1 Livepatch relocation section format
+   4. Livepatch symbols
+      4.1 A livepatch module's symbol table
+      4.2 Livepatch symbol format
+   5. Architecture-specific sections
+   6. Symbol table and Elf section access
+
+1. Background and motivation
+============================
 
 Formerly, livepatch required separate architecture-specific code to write
 relocations. However, arch-specific code to write relocations already
@@ -52,8 +40,8 @@ relocation sections and symbols, which are described in this document. The
 Elf constants used to mark livepatch symbols and relocation sections were
 selected from OS-specific ranges according to the definitions from glibc.
 
-0.1 Why does livepatch need to write its own relocations?
----------------------------------------------------------
+Why does livepatch need to write its own relocations?
+-----------------------------------------------------
 A typical livepatch module contains patched versions of functions that can
 reference non-exported global symbols and non-included local symbols.
 Relocations referencing these types of symbols cannot be left in as-is
@@ -72,13 +60,8 @@ relas reference are special livepatch symbols (see section 2 and 3). The
 arch-specific livepatch relocation code is replaced by a call to
 apply_relocate_add().
 
-================================
-PATCH MODULE FORMAT REQUIREMENTS
-================================
-
---------------------------
-1. Livepatch modinfo field
---------------------------
+2. Livepatch modinfo field
+==========================
 
 Livepatch modules are required to have the "livepatch" modinfo attribute.
 See the sample livepatch module in samples/livepatch/ for how this is done.
@@ -87,8 +70,10 @@ Livepatch modules can be identified by users by using the 'modinfo' command
 and looking for the presence of the "livepatch" field. This field is also
 used by the kernel module loader to identify livepatch modules.
 
-Example modinfo output:
------------------------
+Example:
+--------
+
+**Modinfo output:**
 
 ::
 
@@ -99,13 +84,9 @@ used by the kernel module loader to identify livepatch modules.
 	depends:
 	vermagic:		4.3.0+ SMP mod_unload
 
---------------------------------
-2. Livepatch relocation sections
---------------------------------
+3. Livepatch relocation sections
+================================
 
--------------------------------------------
-2.1 What are livepatch relocation sections?
--------------------------------------------
 A livepatch module manages its own Elf relocation sections to apply
 relocations to modules as well as to the kernel (vmlinux) at the
 appropriate time. For example, if a patch module patches a driver that is
@@ -130,12 +111,9 @@ Every symbol referenced by a rela in a livepatch relocation section is a
 livepatch symbol. These must be resolved before livepatch can call
 apply_relocate_add(). See Section 3 for more information.
 
----------------------------------------
-2.2 Livepatch relocation section format
----------------------------------------
+3.1 Livepatch relocation section format
+=======================================
 
-2.2.1 Required flags
---------------------
 Livepatch relocation sections must be marked with the SHF_RELA_LIVEPATCH
 section flag. See include/uapi/linux/elf.h for the definition. The module
 loader recognizes this flag and will avoid applying those relocation sections
@@ -143,8 +121,6 @@ at patch module load time. These sections must also be marked with SHF_ALLOC,
 so that the module loader doesn't discard them on module load (i.e. they will
 be copied into memory along with the other SHF_ALLOC sections).
 
-2.2.2 Required name format
---------------------------
 The name of a livepatch relocation section must conform to the following
 format::
 
@@ -153,19 +129,28 @@ The name of a livepatch relocation section must conform to the following
   |________||_____| |__________|
      [A]      [B]        [C]
 
-  [A] The relocation section name is prefixed with the string ".klp.rela."
-  [B] The name of the object (i.e. "vmlinux" or name of module) to
-      which the relocation section belongs follows immediately after the prefix.
-  [C] The actual name of the section to which this relocation section applies.
+[A]
+  The relocation section name is prefixed with the string ".klp.rela."
 
-2.2.3 Example livepatch relocation section names:
--------------------------------------------------
-.klp.rela.ext4.text.ext4_attr_store
-.klp.rela.vmlinux.text.cmdline_proc_show
+[B]
+  The name of the object (i.e. "vmlinux" or name of module) to
+  which the relocation section belongs follows immediately after the prefix.
 
-2.2.4 Example `readelf --sections` output for a patch
-module that patches vmlinux and modules 9p, btrfs, ext4:
---------------------------------------------------------
+[C]
+  The actual name of the section to which this relocation section applies.
+
+Examples:
+---------
+
+**Livepatch relocation section names:**
+
+::
+
+  .klp.rela.ext4.text.ext4_attr_store
+  .klp.rela.vmlinux.text.cmdline_proc_show
+
+**`readelf --sections` output for a patch
+module that patches vmlinux and modules 9p, btrfs, ext4:**
 
 ::
 
@@ -182,13 +167,14 @@ The name of a livepatch relocation section must conform to the following
   [ snip ]                                       ^                                             ^
                                                  |                                             |
                                                 [*]                                           [*]
-  [*] Livepatch relocation sections are SHT_RELA sections but with a few special
+
+[*]
+  Livepatch relocation sections are SHT_RELA sections but with a few special
   characteristics. Notice that they are marked SHF_ALLOC ("A") so that they will
   not be discarded when the module is loaded into memory, as well as with the
   SHF_RELA_LIVEPATCH flag ("o" - for OS-specific).
 
-2.2.5 Example `readelf --relocs` output for a patch module:
------------------------------------------------------------
+**`readelf --relocs` output for a patch module:**
 
 ::
 
@@ -200,16 +186,14 @@ The name of a livepatch relocation section must conform to the following
   000000000000004c  0000004900000002 R_X86_64_PC32          0000000000000000 .klp.sym.vmlinux.snprintf,0 - 4
   [ snip ]                                                                   ^
                                                                              |
-                                                                          [*]
-  [*] Every symbol referenced by a relocation is a livepatch symbol.
+                                                                            [*]
+
+[*]
+  Every symbol referenced by a relocation is a livepatch symbol.
 
---------------------
-3. Livepatch symbols
---------------------
+4. Livepatch symbols
+====================
 
--------------------------------
-3.1 What are livepatch symbols?
--------------------------------
 Livepatch symbols are symbols referred to by livepatch relocation sections.
 These are symbols accessed from new versions of functions for patched
 objects, whose addresses cannot be resolved by the module loader (because
@@ -229,9 +213,8 @@ loader can identify and ignore them. Livepatch modules keep these symbols
 in their symbol tables, and the symbol table is made accessible through
 module->symtab.
 
--------------------------------------
-3.2 A livepatch module's symbol table
--------------------------------------
+4.1 A livepatch module's symbol table
+=====================================
 Normally, a stripped down copy of a module's symbol table (containing only
 "core" symbols) is made available through module->symtab (See layout_symtab()
 in kernel/module.c). For livepatch modules, the symbol table copied into memory
@@ -255,18 +238,13 @@ preserved in order for apply_relocate_add() to find the right symbol.
   94: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.printk,0
   [ snip ]
 
----------------------------
-3.3 Livepatch symbol format
----------------------------
+4.2 Livepatch symbol format
+===========================
 
-3.3.1 Required flags
---------------------
 Livepatch symbols must have their section index marked as SHN_LIVEPATCH, so
 that the module loader can identify them and not attempt to resolve them.
 See include/uapi/linux/elf.h for the actual definitions.
 
-3.3.2 Required name format
---------------------------
 Livepatch symbol names must conform to the following format::
 
   .klp.sym.objname.symbol_name,sympos
@@ -274,17 +252,26 @@ See include/uapi/linux/elf.h for the actual definitions.
   |_______||_____| |_________| |
      [A]     [B]       [C]    [D]
 
-  [A] The symbol name is prefixed with the string ".klp.sym."
-  [B] The name of the object (i.e. "vmlinux" or name of module) to
-      which the symbol belongs follows immediately after the prefix.
-  [C] The actual name of the symbol.
-  [D] The position of the symbol in the object (as according to kallsyms)
-      This is used to differentiate duplicate symbols within the same
-      object. The symbol position is expressed numerically (0, 1, 2...).
-      The symbol position of a unique symbol is 0.
+[A]
+  The symbol name is prefixed with the string ".klp.sym."
+
+[B]
+  The name of the object (i.e. "vmlinux" or name of module) to
+  which the symbol belongs follows immediately after the prefix.
 
-3.3.3 Example livepatch symbol names:
--------------------------------------
+[C]
+  The actual name of the symbol.
+
+[D]
+  The position of the symbol in the object (as according to kallsyms)
+  This is used to differentiate duplicate symbols within the same
+  object. The symbol position is expressed numerically (0, 1, 2...).
+  The symbol position of a unique symbol is 0.
+
+Examples:
+---------
+
+**Livepatch symbol names:**
 
 ::
 
@@ -292,8 +279,7 @@ See include/uapi/linux/elf.h for the actual definitions.
 	.klp.sym.vmlinux.printk,0
 	.klp.sym.btrfs.btrfs_ktype,0
 
-3.3.4 Example `readelf --symbols` output for a patch module:
-------------------------------------------------------------
+**`readelf --symbols` output for a patch module:**
 
 ::
 
@@ -307,12 +293,13 @@ See include/uapi/linux/elf.h for the actual definitions.
     [ snip ]                                               ^
                                                            |
                                                           [*]
-  [*] Note that the 'Ndx' (Section index) for these symbols is SHN_LIVEPATCH (0xff20).
-      "OS" means OS-specific.
 
----------------------------------
-4. Architecture-specific sections
----------------------------------
+[*]
+  Note that the 'Ndx' (Section index) for these symbols is SHN_LIVEPATCH (0xff20).
+  "OS" means OS-specific.
+
+5. Architecture-specific sections
+=================================
 Architectures may override arch_klp_init_object_loaded() to perform
 additional arch-specific tasks when a target module loads, such as applying
 arch-specific sections. On x86 for example, we must apply per-object
@@ -321,9 +308,8 @@ These sections must be prefixed with ".klp.arch.$objname." so that they can
 be easily identified when iterating through a patch module's Elf sections
 (See arch/x86/kernel/livepatch.c for a complete example).
 
---------------------------------------
-5. Symbol table and Elf section access
---------------------------------------
+6. Symbol table and Elf section access
+======================================
 A livepatch module's symbol table is accessible through module->symtab.
 
 Since apply_relocate_add() requires access to a module's section headers,
-- 
2.16.4


^ permalink raw reply related	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 20/79] docs: livepatch: convert docs to ReST and rename to *.rst
  2019-04-26  8:10     ` Petr Mladek
@ 2019-04-26  9:04       ` Mauro Carvalho Chehab
  0 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-26  9:04 UTC (permalink / raw)
  To: Petr Mladek
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Josh Poimboeuf, Jiri Kosina, Miroslav Benes,
	Joe Lawrence, Peter Zijlstra, live-patching

Em Fri, 26 Apr 2019 10:10:56 +0200
Petr Mladek <pmladek@suse.com> escreveu:

> On Mon 2019-04-22 10:27:09, Mauro Carvalho Chehab wrote:
> > Convert livepatch documentation to ReST format. The changes
> > are mostly trivial, as the documents are already on a good
> > shape. Just a few markup changes are needed for Sphinx to
> > properly parse the docs.
> > 
> > The conversion is actually:
> >   - add blank lines and identation in order to identify paragraphs;
> >   - fix tables markups;
> >   - add some lists markups;
> >   - mark literal blocks;
> >   - The in-file TOC becomes a comment, in order to skip it from the
> >     output, as Sphinx already generates an index there.
> >   - adjust title markups.
> > 
> > At its new index.rst, let's add a :orphan: while this is not linked to
> > the main index.rst file, in order to avoid build warnings.  
> 
> Thanks a lot for the conversion.
> 
> It made me to review style of all documents. I would like add
> the following changes to make them more consistent.
> 
> I can added as extra patch or merged with your one.
> Whatewer works better for you or documentation people.

If you prefer, feel free to merge it on your tree. 

I don't mind if you fold your patche with my patch or apply 
as a followup patch. Whatever works best for you.

> 
> 
> From 4cecbde44205ba4a9f777cac33ef3469cd46e7f2 Mon Sep 17 00:00:00 2001
> From: Petr Mladek <pmladek@suse.com>
> Date: Thu, 25 Apr 2019 16:58:21 +0200
> Subject: [PATCH] docs/livepatch: Unify style of livepatch documentation in the
>  ReST format
> 
> Make the structure of "Livepatch module Elf format" document similar
> to the main "Livepatch" document.
> 
> Also make the structure of "(Un)patching Callbacks" document similar
> to the "Shadow Variables" document.
> 
> It fixes the most visible inconsistencies of the documentation
> generated from the ReST format.
> 
> Signed-off-by: Petr Mladek <pmladek@suse.com>

Patch looks good to me. 

Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

> ---
>  Documentation/livepatch/callbacks.rst         |  33 ++---
>  Documentation/livepatch/module-elf-format.rst | 186 ++++++++++++--------------
>  2 files changed, 104 insertions(+), 115 deletions(-)
> 
> diff --git a/Documentation/livepatch/callbacks.rst b/Documentation/livepatch/callbacks.rst
> index d76d1f0d9fcf..470944aa8658 100644
> --- a/Documentation/livepatch/callbacks.rst
> +++ b/Documentation/livepatch/callbacks.rst
> @@ -4,7 +4,7 @@
>  
>  Livepatch (un)patch-callbacks provide a mechanism for livepatch modules
>  to execute callback functions when a kernel object is (un)patched.  They
> -can be considered a "power feature" that extends livepatching abilities
> +can be considered a **power feature** that **extends livepatching abilities**
>  to include:
>  
>    - Safe updates to global data
> @@ -17,6 +17,9 @@ In most cases, (un)patch callbacks will need to be used in conjunction
>  with memory barriers and kernel synchronization primitives, like
>  mutexes/spinlocks, or even stop_machine(), to avoid concurrency issues.
>  
> +1. Motivation
> +=============
> +
>  Callbacks differ from existing kernel facilities:
>  
>    - Module init/exit code doesn't run when disabling and re-enabling a
> @@ -28,6 +31,9 @@ Callbacks are part of the klp_object structure and their implementation
>  is specific to that klp_object.  Other livepatch objects may or may not
>  be patched, irrespective of the target klp_object's current state.
>  
> +2. Callback types
> +=================
> +
>  Callbacks can be registered for the following livepatch actions:
>  
>    * Pre-patch
> @@ -47,6 +53,9 @@ be patched, irrespective of the target klp_object's current state.
>                     been restored and no tasks are running patched code,
>                     used to cleanup pre-patch callback resources
>  
> +3. How it works
> +===============
> +
>  Each callback is optional, omitting one does not preclude specifying any
>  other.  However, the livepatching core executes the handlers in
>  symmetry: pre-patch callbacks have a post-unpatch counterpart and
> @@ -90,11 +99,14 @@ If the object did successfully patch, but the patch transition never
>  started for some reason (e.g., if another object failed to patch),
>  only the post-unpatch callback will be called.
>  
> +4. Use cases
> +============
>  
> -Example Use-cases
> -=================
> +Sample livepatch modules demonstrating the callback API can be found in
> +samples/livepatch/ directory.  These samples were modified for use in
> +kselftests and can be found in the lib/livepatch directory.
>  
> -Update global data
> +Global data update
>  ------------------
>  
>  A pre-patch callback can be useful to update a global variable.  For
> @@ -107,24 +119,15 @@ patch the data *after* patching is complete with a post-patch callback,
>  so that tcp_send_challenge_ack() could first be changed to read
>  sysctl_tcp_challenge_ack_limit with READ_ONCE.
>  
> -
> -Support __init and probe function patches
> +__init and probe function patches support
>  -----------------------------------------
>  
>  Although __init and probe functions are not directly livepatch-able, it
>  may be possible to implement similar updates via pre/post-patch
>  callbacks.
>  
> -48900cb6af42 ("virtio-net: drop NETIF_F_FRAGLIST") change the way that
> +The commit ``48900cb6af42 ("virtio-net: drop NETIF_F_FRAGLIST")`` change the way that
>  virtnet_probe() initialized its driver's net_device features.  A
>  pre/post-patch callback could iterate over all such devices, making a
>  similar change to their hw_features value.  (Client functions of the
>  value may need to be updated accordingly.)
> -
> -
> -Other Examples
> -==============
> -
> -Sample livepatch modules demonstrating the callback API can be found in
> -samples/livepatch/ directory.  These samples were modified for use in
> -kselftests and can be found in the lib/livepatch directory.
> diff --git a/Documentation/livepatch/module-elf-format.rst b/Documentation/livepatch/module-elf-format.rst
> index 7f557c6f6deb..2a591e6f8e6c 100644
> --- a/Documentation/livepatch/module-elf-format.rst
> +++ b/Documentation/livepatch/module-elf-format.rst
> @@ -7,30 +7,18 @@ This document outlines the Elf format requirements that livepatch modules must f
>  
>  .. Table of Contents
>  
> -   0. Background and motivation
> -   1. Livepatch modinfo field
> -   2. Livepatch relocation sections
> -      2.1 What are livepatch relocation sections?
> -      2.2 Livepatch relocation section format
> -          2.2.1 Required flags
> -          2.2.2 Required name format
> -          2.2.3 Example livepatch relocation section names
> -          2.2.4 Example `readelf --sections` output
> -          2.2.5 Example `readelf --relocs` output
> -   3. Livepatch symbols
> -      3.1 What are livepatch symbols?
> -      3.2 A livepatch module's symbol table
> -      3.3 Livepatch symbol format
> -          3.3.1 Required flags
> -          3.3.2 Required name format
> -          3.3.3 Example livepatch symbol names
> -          3.3.4 Example `readelf --symbols` output
> -   4. Architecture-specific sections
> -   5. Symbol table and Elf section access
> -
> -----------------------------
> -0. Background and motivation
> -----------------------------
> +   1. Background and motivation
> +   2. Livepatch modinfo field
> +   3. Livepatch relocation sections
> +      3.1 Livepatch relocation section format
> +   4. Livepatch symbols
> +      4.1 A livepatch module's symbol table
> +      4.2 Livepatch symbol format
> +   5. Architecture-specific sections
> +   6. Symbol table and Elf section access
> +
> +1. Background and motivation
> +============================
>  
>  Formerly, livepatch required separate architecture-specific code to write
>  relocations. However, arch-specific code to write relocations already
> @@ -52,8 +40,8 @@ relocation sections and symbols, which are described in this document. The
>  Elf constants used to mark livepatch symbols and relocation sections were
>  selected from OS-specific ranges according to the definitions from glibc.
>  
> -0.1 Why does livepatch need to write its own relocations?
> ----------------------------------------------------------
> +Why does livepatch need to write its own relocations?
> +-----------------------------------------------------
>  A typical livepatch module contains patched versions of functions that can
>  reference non-exported global symbols and non-included local symbols.
>  Relocations referencing these types of symbols cannot be left in as-is
> @@ -72,13 +60,8 @@ relas reference are special livepatch symbols (see section 2 and 3). The
>  arch-specific livepatch relocation code is replaced by a call to
>  apply_relocate_add().
>  
> -================================
> -PATCH MODULE FORMAT REQUIREMENTS
> -================================
> -
> ---------------------------
> -1. Livepatch modinfo field
> ---------------------------
> +2. Livepatch modinfo field
> +==========================
>  
>  Livepatch modules are required to have the "livepatch" modinfo attribute.
>  See the sample livepatch module in samples/livepatch/ for how this is done.
> @@ -87,8 +70,10 @@ Livepatch modules can be identified by users by using the 'modinfo' command
>  and looking for the presence of the "livepatch" field. This field is also
>  used by the kernel module loader to identify livepatch modules.
>  
> -Example modinfo output:
> ------------------------
> +Example:
> +--------
> +
> +**Modinfo output:**
>  
>  ::
>  
> @@ -99,13 +84,9 @@ used by the kernel module loader to identify livepatch modules.
>  	depends:
>  	vermagic:		4.3.0+ SMP mod_unload
>  
> ---------------------------------
> -2. Livepatch relocation sections
> ---------------------------------
> +3. Livepatch relocation sections
> +================================
>  
> --------------------------------------------
> -2.1 What are livepatch relocation sections?
> --------------------------------------------
>  A livepatch module manages its own Elf relocation sections to apply
>  relocations to modules as well as to the kernel (vmlinux) at the
>  appropriate time. For example, if a patch module patches a driver that is
> @@ -130,12 +111,9 @@ Every symbol referenced by a rela in a livepatch relocation section is a
>  livepatch symbol. These must be resolved before livepatch can call
>  apply_relocate_add(). See Section 3 for more information.
>  
> ----------------------------------------
> -2.2 Livepatch relocation section format
> ----------------------------------------
> +3.1 Livepatch relocation section format
> +=======================================
>  
> -2.2.1 Required flags
> ---------------------
>  Livepatch relocation sections must be marked with the SHF_RELA_LIVEPATCH
>  section flag. See include/uapi/linux/elf.h for the definition. The module
>  loader recognizes this flag and will avoid applying those relocation sections
> @@ -143,8 +121,6 @@ at patch module load time. These sections must also be marked with SHF_ALLOC,
>  so that the module loader doesn't discard them on module load (i.e. they will
>  be copied into memory along with the other SHF_ALLOC sections).
>  
> -2.2.2 Required name format
> ---------------------------
>  The name of a livepatch relocation section must conform to the following
>  format::
>  
> @@ -153,19 +129,28 @@ The name of a livepatch relocation section must conform to the following
>    |________||_____| |__________|
>       [A]      [B]        [C]
>  
> -  [A] The relocation section name is prefixed with the string ".klp.rela."
> -  [B] The name of the object (i.e. "vmlinux" or name of module) to
> -      which the relocation section belongs follows immediately after the prefix.
> -  [C] The actual name of the section to which this relocation section applies.
> +[A]
> +  The relocation section name is prefixed with the string ".klp.rela."
>  
> -2.2.3 Example livepatch relocation section names:
> --------------------------------------------------
> -.klp.rela.ext4.text.ext4_attr_store
> -.klp.rela.vmlinux.text.cmdline_proc_show
> +[B]
> +  The name of the object (i.e. "vmlinux" or name of module) to
> +  which the relocation section belongs follows immediately after the prefix.
>  
> -2.2.4 Example `readelf --sections` output for a patch
> -module that patches vmlinux and modules 9p, btrfs, ext4:
> ---------------------------------------------------------
> +[C]
> +  The actual name of the section to which this relocation section applies.
> +
> +Examples:
> +---------
> +
> +**Livepatch relocation section names:**
> +
> +::
> +
> +  .klp.rela.ext4.text.ext4_attr_store
> +  .klp.rela.vmlinux.text.cmdline_proc_show
> +
> +**`readelf --sections` output for a patch
> +module that patches vmlinux and modules 9p, btrfs, ext4:**
>  
>  ::
>  
> @@ -182,13 +167,14 @@ The name of a livepatch relocation section must conform to the following
>    [ snip ]                                       ^                                             ^
>                                                   |                                             |
>                                                  [*]                                           [*]
> -  [*] Livepatch relocation sections are SHT_RELA sections but with a few special
> +
> +[*]
> +  Livepatch relocation sections are SHT_RELA sections but with a few special
>    characteristics. Notice that they are marked SHF_ALLOC ("A") so that they will
>    not be discarded when the module is loaded into memory, as well as with the
>    SHF_RELA_LIVEPATCH flag ("o" - for OS-specific).
>  
> -2.2.5 Example `readelf --relocs` output for a patch module:
> ------------------------------------------------------------
> +**`readelf --relocs` output for a patch module:**
>  
>  ::
>  
> @@ -200,16 +186,14 @@ The name of a livepatch relocation section must conform to the following
>    000000000000004c  0000004900000002 R_X86_64_PC32          0000000000000000 .klp.sym.vmlinux.snprintf,0 - 4
>    [ snip ]                                                                   ^
>                                                                               |
> -                                                                          [*]
> -  [*] Every symbol referenced by a relocation is a livepatch symbol.
> +                                                                            [*]
> +
> +[*]
> +  Every symbol referenced by a relocation is a livepatch symbol.
>  
> ---------------------
> -3. Livepatch symbols
> ---------------------
> +4. Livepatch symbols
> +====================
>  
> --------------------------------
> -3.1 What are livepatch symbols?
> --------------------------------
>  Livepatch symbols are symbols referred to by livepatch relocation sections.
>  These are symbols accessed from new versions of functions for patched
>  objects, whose addresses cannot be resolved by the module loader (because
> @@ -229,9 +213,8 @@ loader can identify and ignore them. Livepatch modules keep these symbols
>  in their symbol tables, and the symbol table is made accessible through
>  module->symtab.
>  
> --------------------------------------
> -3.2 A livepatch module's symbol table
> --------------------------------------
> +4.1 A livepatch module's symbol table
> +=====================================
>  Normally, a stripped down copy of a module's symbol table (containing only
>  "core" symbols) is made available through module->symtab (See layout_symtab()
>  in kernel/module.c). For livepatch modules, the symbol table copied into memory
> @@ -255,18 +238,13 @@ preserved in order for apply_relocate_add() to find the right symbol.
>    94: 0000000000000000     0 NOTYPE  GLOBAL DEFAULT OS [0xff20] .klp.sym.vmlinux.printk,0
>    [ snip ]
>  
> ----------------------------
> -3.3 Livepatch symbol format
> ----------------------------
> +4.2 Livepatch symbol format
> +===========================
>  
> -3.3.1 Required flags
> ---------------------
>  Livepatch symbols must have their section index marked as SHN_LIVEPATCH, so
>  that the module loader can identify them and not attempt to resolve them.
>  See include/uapi/linux/elf.h for the actual definitions.
>  
> -3.3.2 Required name format
> ---------------------------
>  Livepatch symbol names must conform to the following format::
>  
>    .klp.sym.objname.symbol_name,sympos
> @@ -274,17 +252,26 @@ See include/uapi/linux/elf.h for the actual definitions.
>    |_______||_____| |_________| |
>       [A]     [B]       [C]    [D]
>  
> -  [A] The symbol name is prefixed with the string ".klp.sym."
> -  [B] The name of the object (i.e. "vmlinux" or name of module) to
> -      which the symbol belongs follows immediately after the prefix.
> -  [C] The actual name of the symbol.
> -  [D] The position of the symbol in the object (as according to kallsyms)
> -      This is used to differentiate duplicate symbols within the same
> -      object. The symbol position is expressed numerically (0, 1, 2...).
> -      The symbol position of a unique symbol is 0.
> +[A]
> +  The symbol name is prefixed with the string ".klp.sym."
> +
> +[B]
> +  The name of the object (i.e. "vmlinux" or name of module) to
> +  which the symbol belongs follows immediately after the prefix.
>  
> -3.3.3 Example livepatch symbol names:
> --------------------------------------
> +[C]
> +  The actual name of the symbol.
> +
> +[D]
> +  The position of the symbol in the object (as according to kallsyms)
> +  This is used to differentiate duplicate symbols within the same
> +  object. The symbol position is expressed numerically (0, 1, 2...).
> +  The symbol position of a unique symbol is 0.
> +
> +Examples:
> +---------
> +
> +**Livepatch symbol names:**
>  
>  ::
>  
> @@ -292,8 +279,7 @@ See include/uapi/linux/elf.h for the actual definitions.
>  	.klp.sym.vmlinux.printk,0
>  	.klp.sym.btrfs.btrfs_ktype,0
>  
> -3.3.4 Example `readelf --symbols` output for a patch module:
> -------------------------------------------------------------
> +**`readelf --symbols` output for a patch module:**
>  
>  ::
>  
> @@ -307,12 +293,13 @@ See include/uapi/linux/elf.h for the actual definitions.
>      [ snip ]                                               ^
>                                                             |
>                                                            [*]
> -  [*] Note that the 'Ndx' (Section index) for these symbols is SHN_LIVEPATCH (0xff20).
> -      "OS" means OS-specific.
>  
> ----------------------------------
> -4. Architecture-specific sections
> ----------------------------------
> +[*]
> +  Note that the 'Ndx' (Section index) for these symbols is SHN_LIVEPATCH (0xff20).
> +  "OS" means OS-specific.
> +
> +5. Architecture-specific sections
> +=================================
>  Architectures may override arch_klp_init_object_loaded() to perform
>  additional arch-specific tasks when a target module loads, such as applying
>  arch-specific sections. On x86 for example, we must apply per-object
> @@ -321,9 +308,8 @@ These sections must be prefixed with ".klp.arch.$objname." so that they can
>  be easily identified when iterating through a patch module's Elf sections
>  (See arch/x86/kernel/livepatch.c for a complete example).
>  
> ---------------------------------------
> -5. Symbol table and Elf section access
> ---------------------------------------
> +6. Symbol table and Elf section access
> +======================================
>  A livepatch module's symbol table is accessible through module->symtab.
>  
>  Since apply_relocate_add() requires access to a module's section headers,



Thanks,
Mauro

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 25/79] docs: convert docs to ReST and rename to *.rst
  2019-04-25 18:07     ` Mark Brown
@ 2019-04-26  9:46       ` Mauro Carvalho Chehab
  2019-04-27 17:25         ` Mark Brown
  0 siblings, 1 reply; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-26  9:46 UTC (permalink / raw)
  To: Mark Brown
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Sebastian Reichel, Bjorn Helgaas,
	Rafael J. Wysocki, Viresh Kumar, Len Brown, Pavel Machek,
	Nishanth Menon, Stephen Boyd, Liam Girdwood, Mathieu Poirier,
	Suzuki K Poulose, Harry Wei, Alex Shi, Thomas Gleixner,
	Ingo Molnar, Borislav Petkov, H. Peter Anvin, x86, Jani Nikula,
	Joonas Lahtinen, Rodrigo Vivi, David Airlie, Daniel Vetter,
	Johannes Berg, David S. Miller, linux-pm, linux-pci,
	linux-arm-kernel, intel-gfx, dri-devel, linux-wireless, netdev

Hi Mark,

Em Thu, 25 Apr 2019 19:07:58 +0100
Mark Brown <broonie@kernel.org> escreveu:

> On Mon, Apr 22, 2019 at 10:27:14AM -0300, Mauro Carvalho Chehab wrote:
> > Convert the PM documents to ReST, in order to allow them to
> > build with Sphinx.  
> 
> This is massively CCed covering a large range of subsystems and is patch
> 25 of a 79 patch series so I've no context for what's going on here or
> why...  

There are two goals of this series:

1) to prepare for placing the new *.rst files under Documentation/ into an
   index file, being part of one of the books. Most of the stuff covered
   on this series either fit at the system admin guide or at the
   Kernel API documentation book;

2) to ensure that, if some edition on a file would cause warnings at
   Sphinx build, someone will notice and submit a followup patch.

You can see more details at patch 00/79:
	https://lore.kernel.org/lkml/20190422115110.26443b44@coco.lan/

In order to do that, this series has one patch per Documentation/*
sub-directory. This specific one is for the documents under
Documentation/power/ [1].

[1] btw, the title of this specific patch should be, instead:
	docs: power: convert docs to ReST and rename to *.rst

The series is long because I'm trying to cover a significant part
of the documentation files. In any case, except if an eventual
conflict might rise on some file, this patch is independent from
all other files, and should be safe to apply directly via the
subsystem git tree.

I'm working on a follow-up patch series that should be adding the
power/index.rst file into another index file - probably at
Documentation/index.rst[1]. As such patch will be adding a lot of other
index files, the best would be to merge it via the docs tree, in
order to avoid conflicts.


[1] such patch will be removing the ":orphan:" meta-tag from it
(that basically tells the build system to not produce warnings if
the file is not directly or indirectly referenced by the main
index file).

Thanks,
Mauro

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 25/79] docs: convert docs to ReST and rename to *.rst
  2019-04-26  9:46       ` Mauro Carvalho Chehab
@ 2019-04-27 17:25         ` Mark Brown
  2019-04-27 18:13           ` Mauro Carvalho Chehab
  0 siblings, 1 reply; 124+ messages in thread
From: Mark Brown @ 2019-04-27 17:25 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Sebastian Reichel, Bjorn Helgaas,
	Rafael J. Wysocki, Viresh Kumar, Len Brown, Pavel Machek,
	Nishanth Menon, Stephen Boyd, Liam Girdwood, Mathieu Poirier,
	Suzuki K Poulose, Harry Wei, Alex Shi, Thomas Gleixner,
	Ingo Molnar, Borislav Petkov, H. Peter Anvin, x86, Jani Nikula,
	Joonas Lahtinen, Rodrigo Vivi, David Airlie, Daniel Vetter,
	Johannes Berg, David S. Miller, linux-pm, linux-pci,
	linux-arm-kernel, intel-gfx, dri-devel, linux-wireless, netdev

[-- Attachment #1: Type: text/plain, Size: 501 bytes --]

On Fri, Apr 26, 2019 at 06:46:09AM -0300, Mauro Carvalho Chehab wrote:
> Mark Brown <broonie@kernel.org> escreveu:

> > This is massively CCed covering a large range of subsystems and is patch
> > 25 of a 79 patch series so I've no context for what's going on here or
> > why...  

> You can see more details at patch 00/79:
> 	https://lore.kernel.org/lkml/20190422115110.26443b44@coco.lan/

OK, it would've helped to CC people on that.  Anyway

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 25/79] docs: convert docs to ReST and rename to *.rst
  2019-04-27 17:25         ` Mark Brown
@ 2019-04-27 18:13           ` Mauro Carvalho Chehab
  0 siblings, 0 replies; 124+ messages in thread
From: Mauro Carvalho Chehab @ 2019-04-27 18:13 UTC (permalink / raw)
  To: Mark Brown
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Sebastian Reichel, Bjorn Helgaas,
	Rafael J. Wysocki, Viresh Kumar, Len Brown, Pavel Machek,
	Nishanth Menon, Stephen Boyd, Liam Girdwood, Mathieu Poirier,
	Suzuki K Poulose, Harry Wei, Alex Shi, Thomas Gleixner,
	Ingo Molnar, Borislav Petkov, H. Peter Anvin, x86, Jani Nikula,
	Joonas Lahtinen, Rodrigo Vivi, David Airlie, Daniel Vetter,
	Johannes Berg, David S. Miller, linux-pm, linux-pci,
	linux-arm-kernel, intel-gfx, dri-devel, linux-wireless, netdev

Em Sun, 28 Apr 2019 02:25:51 +0900
Mark Brown <broonie@kernel.org> escreveu:

> On Fri, Apr 26, 2019 at 06:46:09AM -0300, Mauro Carvalho Chehab wrote:
> > Mark Brown <broonie@kernel.org> escreveu:  
> 
> > > This is massively CCed covering a large range of subsystems and is patch
> > > 25 of a 79 patch series so I've no context for what's going on here or
> > > why...    
> 
> > You can see more details at patch 00/79:
> > 	https://lore.kernel.org/lkml/20190422115110.26443b44@coco.lan/  
> 
> OK, it would've helped to CC people on that. 

I know, but, due to bad experiences in the past, I had to actually
remove people from it, because several servers reject e-mails with 
more than ~30 destination addresses, as they consider it to be spam.

> Anyway
> 
> Acked-by: Mark Brown <broonie@kernel.org>

Thanks!

Thanks,
Mauro

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 43/79] docs: m68k: convert docs to ReST and rename to *.rst
  2019-04-22 13:27   ` [PATCH v2 43/79] docs: m68k: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
@ 2019-05-03 11:55     ` Geert Uytterhoeven
  0 siblings, 0 replies; 124+ messages in thread
From: Geert Uytterhoeven @ 2019-05-03 11:55 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab,
	Linux Kernel Mailing List, Jonathan Corbet

Hi Mauro,

On Mon, Apr 22, 2019 at 3:34 PM Mauro Carvalho Chehab
<mchehab+samsung@kernel.org> wrote:
> Convert the m68k kernel-options.txt file to ReST.
>
> The conversion is trivial, as the document is already on a format
> close enough to ReST. Just some small adjustments were needed in
> order to make it both good for being parsed while keeping it on
> a good txt shape.
>
> At its new index.rst, let's add a :orphan: while this is not linked to
> the main index.rst file, in order to avoid build warnings.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Thanks for the conversion!

Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>

P.S. Looks like some kernel options no longer exist, and need to be removed.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 62/79] docs: laptops: convert to ReST
  2019-04-22 13:27   ` [PATCH v2 62/79] docs: laptops: " Mauro Carvalho Chehab
@ 2019-05-06  8:59     ` Andy Shevchenko
  0 siblings, 0 replies; 124+ messages in thread
From: Andy Shevchenko @ 2019-05-06  8:59 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab,
	Linux Kernel Mailing List, Jonathan Corbet, Mattia Dongili,
	Arnd Bergmann, Greg Kroah-Hartman, Darren Hart, Andy Shevchenko,
	Platform Driver

On Mon, Apr 22, 2019 at 4:28 PM Mauro Carvalho Chehab
<mchehab+samsung@kernel.org> wrote:
>
> Rename the laptops documentation files to ReST, add an
> index for them and adjust in order to produce a nice html
> output via the Sphinx build system.
>
> At its new index.rst, let's add a :orphan: while this is not linked to
> the main index.rst file, in order to avoid build warnings.
>

Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> ---
>  Documentation/ABI/testing/sysfs-block-device  |   2 +-
>  .../ABI/testing/sysfs-platform-asus-laptop    |   2 +-
>  .../admin-guide/kernel-parameters.txt         |   2 +-
>  .../{asus-laptop.txt => asus-laptop.rst}      |  91 ++--
>  ...otection.txt => disk-shock-protection.rst} |  32 +-
>  Documentation/laptops/index.rst               |  17 +
>  .../{laptop-mode.txt => laptop-mode.rst}      | 509 +++++++++---------
>  .../{sony-laptop.txt => sony-laptop.rst}      |  58 +-
>  .../laptops/{sonypi.txt => sonypi.rst}        |  28 +-
>  .../{thinkpad-acpi.txt => thinkpad-acpi.rst}  | 363 ++++++++-----
>  .../{toshiba_haps.txt => toshiba_haps.rst}    |  47 +-
>  Documentation/sysctl/vm.txt                   |   4 +-
>  MAINTAINERS                                   |   2 +-
>  drivers/char/Kconfig                          |   2 +-
>  drivers/platform/x86/Kconfig                  |   4 +-
>  15 files changed, 660 insertions(+), 503 deletions(-)
>  rename Documentation/laptops/{asus-laptop.txt => asus-laptop.rst} (84%)
>  rename Documentation/laptops/{disk-shock-protection.txt => disk-shock-protection.rst} (91%)
>  create mode 100644 Documentation/laptops/index.rst
>  rename Documentation/laptops/{laptop-mode.txt => laptop-mode.rst} (62%)
>  rename Documentation/laptops/{sony-laptop.txt => sony-laptop.rst} (85%)
>  rename Documentation/laptops/{sonypi.txt => sonypi.rst} (87%)
>  rename Documentation/laptops/{thinkpad-acpi.txt => thinkpad-acpi.rst} (89%)
>  rename Documentation/laptops/{toshiba_haps.txt => toshiba_haps.rst} (60%)
>
> diff --git a/Documentation/ABI/testing/sysfs-block-device b/Documentation/ABI/testing/sysfs-block-device
> index 82ef6eab042d..0d57bbb4fddc 100644
> --- a/Documentation/ABI/testing/sysfs-block-device
> +++ b/Documentation/ABI/testing/sysfs-block-device
> @@ -45,7 +45,7 @@ Description:
>                 - Values below -2 are rejected with -EINVAL
>
>                 For more information, see
> -               Documentation/laptops/disk-shock-protection.txt
> +               Documentation/laptops/disk-shock-protection.rst
>
>
>  What:          /sys/block/*/device/ncq_prio_enable
> diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop
> index cd9d667c3da2..d67fa4bafa70 100644
> --- a/Documentation/ABI/testing/sysfs-platform-asus-laptop
> +++ b/Documentation/ABI/testing/sysfs-platform-asus-laptop
> @@ -31,7 +31,7 @@ Description:
>                 To control the LED display, use the following :
>                     echo 0x0T000DDD > /sys/devices/platform/asus_laptop/
>                 where T control the 3 letters display, and DDD the 3 digits display.
> -               The DDD table can be found in Documentation/laptops/asus-laptop.txt
> +               The DDD table can be found in Documentation/laptops/asus-laptop.rst
>
>  What:          /sys/devices/platform/asus_laptop/bluetooth
>  Date:          January 2007
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index bf6d34fb7180..65d66010b134 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -4268,7 +4268,7 @@
>                         Format: <integer>
>
>         sonypi.*=       [HW] Sony Programmable I/O Control Device driver
> -                       See Documentation/laptops/sonypi.txt
> +                       See Documentation/laptops/sonypi.rst
>
>         spectre_v2=     [X86] Control mitigation of Spectre variant 2
>                         (indirect branch speculation) vulnerability.
> diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.rst
> similarity index 84%
> rename from Documentation/laptops/asus-laptop.txt
> rename to Documentation/laptops/asus-laptop.rst
> index 5f2858712aa0..4c263f89a22b 100644
> --- a/Documentation/laptops/asus-laptop.txt
> +++ b/Documentation/laptops/asus-laptop.rst
> @@ -1,6 +1,9 @@
> +==================
>  Asus Laptop Extras
> +==================
>
>  Version 0.1
> +
>  August 6, 2009
>
>  Corentin Chary <corentincj@iksaif.net>
> @@ -10,11 +13,12 @@ http://acpi4asus.sf.net/
>   It may also support some MEDION, JVC or VICTOR laptops (such as MEDION 9675 or
>   VICTOR XP7210 for example). It makes all the extra buttons generate input
>   events (like keyboards).
> +
>   On some models adds support for changing the display brightness and output,
>   switching the LCD backlight on and off, and most importantly, allows you to
>   blink those fancy LEDs intended for reporting mail and wireless status.
>
> -This driver supercedes the old asus_acpi driver.
> +This driver supersedes the old asus_acpi driver.
>
>  Requirements
>  ------------
> @@ -49,7 +53,7 @@ Usage
>    see some lines like this :
>
>        Asus Laptop Extras version 0.42
> -        L2D model detected.
> +        - L2D model detected.
>
>    If it is not the output you have on your laptop, send it (and the laptop's
>    DSDT) to me.
> @@ -68,9 +72,12 @@ Usage
>  LEDs
>  ----
>
> -  You can modify LEDs be echoing values to /sys/class/leds/asus::*/brightness :
> +  You can modify LEDs be echoing values to `/sys/class/leds/asus/*/brightness`::
> +
>      echo 1 >  /sys/class/leds/asus::mail/brightness
> +
>    will switch the mail LED on.
> +
>    You can also know if they are on/off by reading their content and use
>    kernel triggers like disk-activity or heartbeat.
>
> @@ -81,7 +88,7 @@ Backlight
>    /sys/class/backlight/asus-laptop/. Brightness Values are between 0 and 15.
>
>  Wireless devices
> ----------------
> +----------------
>
>    You can turn the internal Bluetooth adapter on/off with the bluetooth entry
>    (only on models with Bluetooth). This usually controls the associated LED.
> @@ -93,18 +100,20 @@ Display switching
>    Note: the display switching code is currently considered EXPERIMENTAL.
>
>    Switching works for the following models:
> -    L3800C
> -    A2500H
> -    L5800C
> -    M5200N
> -    W1000N (albeit with some glitches)
> -    M6700R
> -    A6JC
> -    F3J
> +
> +    - L3800C
> +    - A2500H
> +    - L5800C
> +    - M5200N
> +    - W1000N (albeit with some glitches)
> +    - M6700R
> +    - A6JC
> +    - F3J
>
>    Switching doesn't work for the following:
> -    M3700N
> -    L2X00D (locks the laptop under certain conditions)
> +
> +    - M3700N
> +    - L2X00D (locks the laptop under certain conditions)
>
>    To switch the displays, echo values from 0 to 15 to
>    /sys/devices/platform/asus-laptop/display. The significance of those values
> @@ -113,48 +122,51 @@ Display switching
>    +-------+-----+-----+-----+-----+-----+
>    | Bin   | Val | DVI | TV  | CRT | LCD |
>    +-------+-----+-----+-----+-----+-----+
> -  + 0000  +   0 +     +     +     +     +
> +  | 0000  |   0 |     |     |     |     |
>    +-------+-----+-----+-----+-----+-----+
> -  + 0001  +   1 +     +     +     +  X  +
> +  | 0001  |   1 |     |     |     |  X  |
>    +-------+-----+-----+-----+-----+-----+
> -  + 0010  +   2 +     +     +  X  +     +
> +  | 0010  |   2 |     |     |  X  |     |
>    +-------+-----+-----+-----+-----+-----+
> -  + 0011  +   3 +     +     +  X  +  X  +
> +  | 0011  |   3 |     |     |  X  |  X  |
>    +-------+-----+-----+-----+-----+-----+
> -  + 0100  +   4 +     +  X  +     +     +
> +  | 0100  |   4 |     |  X  |     |     |
>    +-------+-----+-----+-----+-----+-----+
> -  + 0101  +   5 +     +  X  +     + X   +
> +  | 0101  |   5 |     |  X  |     | X   |
>    +-------+-----+-----+-----+-----+-----+
> -  + 0110  +   6 +     +  X  +  X  +     +
> +  | 0110  |   6 |     |  X  |  X  |     |
>    +-------+-----+-----+-----+-----+-----+
> -  + 0111  +   7 +     +  X  +  X  +  X  +
> +  | 0111  |   7 |     |  X  |  X  |  X  |
>    +-------+-----+-----+-----+-----+-----+
> -  + 1000  +   8 +  X  +     +     +     +
> +  | 1000  |   8 |  X  |     |     |     |
>    +-------+-----+-----+-----+-----+-----+
> -  + 1001  +   9 +  X  +     +     +  X  +
> +  | 1001  |   9 |  X  |     |     |  X  |
>    +-------+-----+-----+-----+-----+-----+
> -  + 1010  +  10 +  X  +     +  X  +     +
> +  | 1010  |  10 |  X  |     |  X  |     |
>    +-------+-----+-----+-----+-----+-----+
> -  + 1011  +  11 +  X  +     +  X  +  X  +
> +  | 1011  |  11 |  X  |     |  X  |  X  |
>    +-------+-----+-----+-----+-----+-----+
> -  + 1100  +  12 +  X  +  X  +     +     +
> +  | 1100  |  12 |  X  |  X  |     |     |
>    +-------+-----+-----+-----+-----+-----+
> -  + 1101  +  13 +  X  +  X  +     +  X  +
> +  | 1101  |  13 |  X  |  X  |     |  X  |
>    +-------+-----+-----+-----+-----+-----+
> -  + 1110  +  14 +  X  +  X  +  X  +     +
> +  | 1110  |  14 |  X  |  X  |  X  |     |
>    +-------+-----+-----+-----+-----+-----+
> -  + 1111  +  15 +  X  +  X  +  X  +  X  +
> +  | 1111  |  15 |  X  |  X  |  X  |  X  |
>    +-------+-----+-----+-----+-----+-----+
>
>    In most cases, the appropriate displays must be plugged in for the above
>    combinations to work. TV-Out may need to be initialized at boot time.
>
>    Debugging:
> +
>    1) Check whether the Fn+F8 key:
> +
>       a) does not lock the laptop (try a boot with noapic / nolapic if it does)
>       b) generates events (0x6n, where n is the value corresponding to the
>          configuration above)
>       c) actually works
> +
>       Record the disp value at every configuration.
>    2) Echo values from 0 to 15 to /sys/devices/platform/asus-laptop/display.
>       Record its value, note any change. If nothing changes, try a broader range,
> @@ -164,7 +176,7 @@ Display switching
>
>    Note: on some machines (e.g. L3C), after the module has been loaded, only 0x6n
>    events are generated and no actual switching occurs. In such a case, a line
> -  like:
> +  like::
>
>      echo $((10#$arg-60)) > /sys/devices/platform/asus-laptop/display
>
> @@ -180,15 +192,16 @@ LED display
>    several items of information.
>
>    LED display works for the following models:
> -    W1000N
> -    W1J
>
> -  To control the LED display, use the following :
> +    - W1000N
> +    - W1J
> +
> +  To control the LED display, use the following::
>
>      echo 0x0T000DDD > /sys/devices/platform/asus-laptop/
>
>    where T control the 3 letters display, and DDD the 3 digits display,
> -  according to the tables below.
> +  according to the tables below::
>
>           DDD (digits)
>           000 to 999 = display digits
> @@ -208,8 +221,8 @@ LED display
>    For example "echo 0x01000001 >/sys/devices/platform/asus-laptop/ledd"
>    would display "DVD001".
>
> -Driver options:
> ----------------
> +Driver options
> +--------------
>
>   Options can be passed to the asus-laptop driver using the standard
>   module argument syntax (<param>=<value> when passing the option to the
> @@ -219,6 +232,7 @@ Driver options:
>              wapf: WAPF defines the behavior of the Fn+Fx wlan key
>                    The significance of values is yet to be found, but
>                    most of the time:
> +
>                    - 0x0 should do nothing
>                    - 0x1 should allow to control the device with Fn+Fx key.
>                    - 0x4 should send an ACPI event (0x88) while pressing the Fn+Fx key
> @@ -237,7 +251,7 @@ Unsupported models
>   - ASUS L7300G
>   - ASUS L8400
>
> -Patches, Errors, Questions:
> +Patches, Errors, Questions
>  --------------------------
>
>   I appreciate any success or failure
> @@ -253,5 +267,6 @@ Patches, Errors, Questions:
>   Any other comments or patches are also more than welcome.
>
>   acpi4asus-user@lists.sourceforge.net
> +
>   http://sourceforge.net/projects/acpi4asus
>
> diff --git a/Documentation/laptops/disk-shock-protection.txt b/Documentation/laptops/disk-shock-protection.rst
> similarity index 91%
> rename from Documentation/laptops/disk-shock-protection.txt
> rename to Documentation/laptops/disk-shock-protection.rst
> index 0e6ba2663834..e97c5f78d8c3 100644
> --- a/Documentation/laptops/disk-shock-protection.txt
> +++ b/Documentation/laptops/disk-shock-protection.rst
> @@ -1,17 +1,18 @@
> +==========================
>  Hard disk shock protection
>  ==========================
>
>  Author: Elias Oltmanns <eo@nebensachen.de>
> +
>  Last modified: 2008-10-03
>
>
> -0. Contents
> ------------
> +.. 0. Contents
>
> -1. Intro
> -2. The interface
> -3. References
> -4. CREDITS
> +   1. Intro
> +   2. The interface
> +   3. References
> +   4. CREDITS
>
>
>  1. Intro
> @@ -36,8 +37,8 @@ that).
>  ----------------
>
>  For each ATA device, the kernel exports the file
> -block/*/device/unload_heads in sysfs (here assumed to be mounted under
> -/sys). Access to /sys/block/*/device/unload_heads is denied with
> +`block/*/device/unload_heads` in sysfs (here assumed to be mounted under
> +/sys). Access to `/sys/block/*/device/unload_heads` is denied with
>  -EOPNOTSUPP if the device does not support the unload feature.
>  Otherwise, writing an integer value to this file will take the heads
>  of the respective drive off the platter and block all I/O operations
> @@ -54,18 +55,18 @@ cancel a previously set timeout and resume normal operation
>  immediately by specifying a timeout of 0. Values below -2 are rejected
>  with -EINVAL (see below for the special meaning of -1 and -2). If the
>  timeout specified for a recent head park request has not yet expired,
> -reading from /sys/block/*/device/unload_heads will report the number
> +reading from `/sys/block/*/device/unload_heads` will report the number
>  of milliseconds remaining until normal operation will be resumed;
>  otherwise, reading the unload_heads attribute will return 0.
>
>  For example, do the following in order to park the heads of drive
> -/dev/sda and stop all I/O operations for five seconds:
> +/dev/sda and stop all I/O operations for five seconds::
>
> -# echo 5000 > /sys/block/sda/device/unload_heads
> +       # echo 5000 > /sys/block/sda/device/unload_heads
>
> -A simple
> +A simple::
>
> -# cat /sys/block/sda/device/unload_heads
> +       # cat /sys/block/sda/device/unload_heads
>
>  will show you how many milliseconds are left before normal operation
>  will be resumed.
> @@ -112,9 +113,9 @@ unload_heads attribute. If you know that your device really does
>  support the unload feature (for instance, because the vendor of your
>  laptop or the hard drive itself told you so), then you can tell the
>  kernel to enable the usage of this feature for that drive by writing
> -the special value -1 to the unload_heads attribute:
> +the special value -1 to the unload_heads attribute::
>
> -# echo -1 > /sys/block/sda/device/unload_heads
> +       # echo -1 > /sys/block/sda/device/unload_heads
>
>  will enable the feature for /dev/sda, and giving -2 instead of -1 will
>  disable it again.
> @@ -135,6 +136,7 @@ for use. Please feel free to add projects that have been the victims
>  of my ignorance.
>
>  - http://www.thinkwiki.org/wiki/HDAPS
> +
>    See this page for information about Linux support of the hard disk
>    active protection system as implemented in IBM/Lenovo Thinkpads.
>
> diff --git a/Documentation/laptops/index.rst b/Documentation/laptops/index.rst
> new file mode 100644
> index 000000000000..001a30910d09
> --- /dev/null
> +++ b/Documentation/laptops/index.rst
> @@ -0,0 +1,17 @@
> +:orphan:
> +
> +==============
> +Laptop Drivers
> +==============
> +
> +.. toctree::
> +   :maxdepth: 1
> +
> +   asus-laptop
> +   disk-shock-protection
> +   laptop-mode
> +   lg-laptop
> +   sony-laptop
> +   sonypi
> +   thinkpad-acpi
> +   toshiba_haps
> diff --git a/Documentation/laptops/laptop-mode.txt b/Documentation/laptops/laptop-mode.rst
> similarity index 62%
> rename from Documentation/laptops/laptop-mode.txt
> rename to Documentation/laptops/laptop-mode.rst
> index 1c707fc9b141..c984c4262f2e 100644
> --- a/Documentation/laptops/laptop-mode.txt
> +++ b/Documentation/laptops/laptop-mode.rst
> @@ -1,8 +1,11 @@
> +===============================================
>  How to conserve battery power using laptop-mode
> ------------------------------------------------
> +===============================================
>
>  Document Author: Bart Samwel (bart@samwel.tk)
> +
>  Date created: January 2, 2004
> +
>  Last modified: December 06, 2004
>
>  Introduction
> @@ -12,17 +15,16 @@ Laptop mode is used to minimize the time that the hard disk needs to be spun up,
>  to conserve battery power on laptops. It has been reported to cause significant
>  power savings.
>
> -Contents
> ---------
> +.. Contents
>
> -* Introduction
> -* Installation
> -* Caveats
> -* The Details
> -* Tips & Tricks
> -* Control script
> -* ACPI integration
> -* Monitoring tool
> +   * Introduction
> +   * Installation
> +   * Caveats
> +   * The Details
> +   * Tips & Tricks
> +   * Control script
> +   * ACPI integration
> +   * Monitoring tool
>
>
>  Installation
> @@ -33,7 +35,7 @@ or anything. Simply install all the files included in this document, and
>  laptop mode will automatically be started when you're on battery. For
>  your convenience, a tarball containing an installer can be downloaded at:
>
> -http://www.samwel.tk/laptop_mode/laptop_mode/
> +       http://www.samwel.tk/laptop_mode/laptop_mode/
>
>  To configure laptop mode, you need to edit the configuration file, which is
>  located in /etc/default/laptop-mode on Debian-based systems, or in
> @@ -209,7 +211,7 @@ Tips & Tricks
>    this on powerbooks too. I hope that this is a piece of information that
>    might be useful to the Laptop Mode patch or its users."
>
> -* In syslog.conf, you can prefix entries with a dash ``-'' to omit syncing the
> +* In syslog.conf, you can prefix entries with a dash `-` to omit syncing the
>    file after every logging. When you're using laptop-mode and your disk doesn't
>    spin down, this is a likely culprit.
>
> @@ -233,83 +235,82 @@ configuration file
>  It should be installed as /etc/default/laptop-mode on Debian, and as
>  /etc/sysconfig/laptop-mode on Red Hat, SUSE, Mandrake, and other work-alikes.
>
> ---------------------CONFIG FILE BEGIN-------------------------------------------
> -# Maximum time, in seconds, of hard drive spindown time that you are
> -# comfortable with. Worst case, it's possible that you could lose this
> -# amount of work if your battery fails you while in laptop mode.
> -#MAX_AGE=600
> +Config file::
>
> -# Automatically disable laptop mode when the number of minutes of battery
> -# that you have left goes below this threshold.
> -MINIMUM_BATTERY_MINUTES=10
> +  # Maximum time, in seconds, of hard drive spindown time that you are
> +  # comfortable with. Worst case, it's possible that you could lose this
> +  # amount of work if your battery fails you while in laptop mode.
> +  #MAX_AGE=600
>
> -# Read-ahead, in 512-byte sectors. You can spin down the disk while playing MP3/OGG
> -# by setting the disk readahead to 8MB (READAHEAD=16384). Effectively, the disk
> -# will read a complete MP3 at once, and will then spin down while the MP3/OGG is
> -# playing.
> -#READAHEAD=4096
> +  # Automatically disable laptop mode when the number of minutes of battery
> +  # that you have left goes below this threshold.
> +  MINIMUM_BATTERY_MINUTES=10
>
> -# Shall we remount journaled fs. with appropriate commit interval? (1=yes)
> -#DO_REMOUNTS=1
> +  # Read-ahead, in 512-byte sectors. You can spin down the disk while playing MP3/OGG
> +  # by setting the disk readahead to 8MB (READAHEAD=16384). Effectively, the disk
> +  # will read a complete MP3 at once, and will then spin down while the MP3/OGG is
> +  # playing.
> +  #READAHEAD=4096
>
> -# And shall we add the "noatime" option to that as well? (1=yes)
> -#DO_REMOUNT_NOATIME=1
> +  # Shall we remount journaled fs. with appropriate commit interval? (1=yes)
> +  #DO_REMOUNTS=1
>
> -# Dirty synchronous ratio.  At this percentage of dirty pages the process
> -# which
> -# calls write() does its own writeback
> -#DIRTY_RATIO=40
> +  # And shall we add the "noatime" option to that as well? (1=yes)
> +  #DO_REMOUNT_NOATIME=1
>
> -#
> -# Allowed dirty background ratio, in percent.  Once DIRTY_RATIO has been
> -# exceeded, the kernel will wake flusher threads which will then reduce the
> -# amount of dirty memory to dirty_background_ratio.  Set this nice and low,
> -# so once some writeout has commenced, we do a lot of it.
> -#
> -#DIRTY_BACKGROUND_RATIO=5
> +  # Dirty synchronous ratio.  At this percentage of dirty pages the process
> +  # which
> +  # calls write() does its own writeback
> +  #DIRTY_RATIO=40
>
> -# kernel default dirty buffer age
> -#DEF_AGE=30
> -#DEF_UPDATE=5
> -#DEF_DIRTY_BACKGROUND_RATIO=10
> -#DEF_DIRTY_RATIO=40
> -#DEF_XFS_AGE_BUFFER=15
> -#DEF_XFS_SYNC_INTERVAL=30
> -#DEF_XFS_BUFD_INTERVAL=1
> +  #
> +  # Allowed dirty background ratio, in percent.  Once DIRTY_RATIO has been
> +  # exceeded, the kernel will wake flusher threads which will then reduce the
> +  # amount of dirty memory to dirty_background_ratio.  Set this nice and low,
> +  # so once some writeout has commenced, we do a lot of it.
> +  #
> +  #DIRTY_BACKGROUND_RATIO=5
>
> -# This must be adjusted manually to the value of HZ in the running kernel
> -# on 2.4, until the XFS people change their 2.4 external interfaces to work in
> -# centisecs. This can be automated, but it's a work in progress that still
> -# needs# some fixes. On 2.6 kernels, XFS uses USER_HZ instead of HZ for
> -# external interfaces, and that is currently always set to 100. So you don't
> -# need to change this on 2.6.
> -#XFS_HZ=100
> +  # kernel default dirty buffer age
> +  #DEF_AGE=30
> +  #DEF_UPDATE=5
> +  #DEF_DIRTY_BACKGROUND_RATIO=10
> +  #DEF_DIRTY_RATIO=40
> +  #DEF_XFS_AGE_BUFFER=15
> +  #DEF_XFS_SYNC_INTERVAL=30
> +  #DEF_XFS_BUFD_INTERVAL=1
>
> -# Should the maximum CPU frequency be adjusted down while on battery?
> -# Requires CPUFreq to be setup.
> -# See Documentation/admin-guide/pm/cpufreq.rst for more info
> -#DO_CPU=0
> +  # This must be adjusted manually to the value of HZ in the running kernel
> +  # on 2.4, until the XFS people change their 2.4 external interfaces to work in
> +  # centisecs. This can be automated, but it's a work in progress that still
> +  # needs# some fixes. On 2.6 kernels, XFS uses USER_HZ instead of HZ for
> +  # external interfaces, and that is currently always set to 100. So you don't
> +  # need to change this on 2.6.
> +  #XFS_HZ=100
>
> -# When on battery what is the maximum CPU speed that the system should
> -# use? Legal values are "slowest" for the slowest speed that your
> -# CPU is able to operate at, or a value listed in:
> -# /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies
> -# Only applicable if DO_CPU=1.
> -#CPU_MAXFREQ=slowest
> +  # Should the maximum CPU frequency be adjusted down while on battery?
> +  # Requires CPUFreq to be setup.
> +  # See Documentation/admin-guide/pm/cpufreq.rst for more info
> +  #DO_CPU=0
>
> -# Idle timeout for your hard drive (man hdparm for valid values, -S option)
> -# Default is 2 hours on AC (AC_HD=244) and 20 seconds for battery (BATT_HD=4).
> -#AC_HD=244
> -#BATT_HD=4
> +  # When on battery what is the maximum CPU speed that the system should
> +  # use? Legal values are "slowest" for the slowest speed that your
> +  # CPU is able to operate at, or a value listed in:
> +  # /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies
> +  # Only applicable if DO_CPU=1.
> +  #CPU_MAXFREQ=slowest
>
> -# The drives for which to adjust the idle timeout. Separate them by a space,
> -# e.g. HD="/dev/hda /dev/hdb".
> -#HD="/dev/hda"
> +  # Idle timeout for your hard drive (man hdparm for valid values, -S option)
> +  # Default is 2 hours on AC (AC_HD=244) and 20 seconds for battery (BATT_HD=4).
> +  #AC_HD=244
> +  #BATT_HD=4
>
> -# Set the spindown timeout on a hard drive?
> -#DO_HD=1
> +  # The drives for which to adjust the idle timeout. Separate them by a space,
> +  # e.g. HD="/dev/hda /dev/hdb".
> +  #HD="/dev/hda"
>
> ---------------------CONFIG FILE END---------------------------------------------
> +  # Set the spindown timeout on a hard drive?
> +  #DO_HD=1
>
>
>  Control script
> @@ -318,125 +319,126 @@ Control script
>  Please note that this control script works for the Linux 2.4 and 2.6 series (thanks
>  to Kiko Piris).
>
> ---------------------CONTROL SCRIPT BEGIN----------------------------------------
> -#!/bin/bash
> +Control script::
>
> -# start or stop laptop_mode, best run by a power management daemon when
> -# ac gets connected/disconnected from a laptop
> -#
> -# install as /sbin/laptop_mode
> -#
> -# Contributors to this script:   Kiko Piris
> -#                               Bart Samwel
> -#                               Micha Feigin
> -#                               Andrew Morton
> -#                               Herve Eychenne
> -#                               Dax Kelson
> -#
> -# Original Linux 2.4 version by: Jens Axboe
> +  #!/bin/bash
>
> -#############################################################################
> +  # start or stop laptop_mode, best run by a power management daemon when
> +  # ac gets connected/disconnected from a laptop
> +  #
> +  # install as /sbin/laptop_mode
> +  #
> +  # Contributors to this script:   Kiko Piris
> +  #                             Bart Samwel
> +  #                             Micha Feigin
> +  #                             Andrew Morton
> +  #                             Herve Eychenne
> +  #                             Dax Kelson
> +  #
> +  # Original Linux 2.4 version by: Jens Axboe
>
> -# Source config
> -if [ -f /etc/default/laptop-mode ] ; then
> +  #############################################################################
> +
> +  # Source config
> +  if [ -f /etc/default/laptop-mode ] ; then
>         # Debian
>         . /etc/default/laptop-mode
> -elif [ -f /etc/sysconfig/laptop-mode ] ; then
> +  elif [ -f /etc/sysconfig/laptop-mode ] ; then
>         # Others
> -        . /etc/sysconfig/laptop-mode
> -fi
> +          . /etc/sysconfig/laptop-mode
> +  fi
>
> -# Don't raise an error if the config file is incomplete
> -# set defaults instead:
> +  # Don't raise an error if the config file is incomplete
> +  # set defaults instead:
>
> -# Maximum time, in seconds, of hard drive spindown time that you are
> -# comfortable with. Worst case, it's possible that you could lose this
> -# amount of work if your battery fails you while in laptop mode.
> -MAX_AGE=${MAX_AGE:-'600'}
> +  # Maximum time, in seconds, of hard drive spindown time that you are
> +  # comfortable with. Worst case, it's possible that you could lose this
> +  # amount of work if your battery fails you while in laptop mode.
> +  MAX_AGE=${MAX_AGE:-'600'}
>
> -# Read-ahead, in kilobytes
> -READAHEAD=${READAHEAD:-'4096'}
> +  # Read-ahead, in kilobytes
> +  READAHEAD=${READAHEAD:-'4096'}
>
> -# Shall we remount journaled fs. with appropriate commit interval? (1=yes)
> -DO_REMOUNTS=${DO_REMOUNTS:-'1'}
> +  # Shall we remount journaled fs. with appropriate commit interval? (1=yes)
> +  DO_REMOUNTS=${DO_REMOUNTS:-'1'}
>
> -# And shall we add the "noatime" option to that as well? (1=yes)
> -DO_REMOUNT_NOATIME=${DO_REMOUNT_NOATIME:-'1'}
> +  # And shall we add the "noatime" option to that as well? (1=yes)
> +  DO_REMOUNT_NOATIME=${DO_REMOUNT_NOATIME:-'1'}
>
> -# Shall we adjust the idle timeout on a hard drive?
> -DO_HD=${DO_HD:-'1'}
> +  # Shall we adjust the idle timeout on a hard drive?
> +  DO_HD=${DO_HD:-'1'}
>
> -# Adjust idle timeout on which hard drive?
> -HD="${HD:-'/dev/hda'}"
> +  # Adjust idle timeout on which hard drive?
> +  HD="${HD:-'/dev/hda'}"
>
> -# spindown time for HD (hdparm -S values)
> -AC_HD=${AC_HD:-'244'}
> -BATT_HD=${BATT_HD:-'4'}
> +  # spindown time for HD (hdparm -S values)
> +  AC_HD=${AC_HD:-'244'}
> +  BATT_HD=${BATT_HD:-'4'}
>
> -# Dirty synchronous ratio.  At this percentage of dirty pages the process which
> -# calls write() does its own writeback
> -DIRTY_RATIO=${DIRTY_RATIO:-'40'}
> +  # Dirty synchronous ratio.  At this percentage of dirty pages the process which
> +  # calls write() does its own writeback
> +  DIRTY_RATIO=${DIRTY_RATIO:-'40'}
>
> -# cpu frequency scaling
> -# See Documentation/admin-guide/pm/cpufreq.rst for more info
> -DO_CPU=${CPU_MANAGE:-'0'}
> -CPU_MAXFREQ=${CPU_MAXFREQ:-'slowest'}
> +  # cpu frequency scaling
> +  # See Documentation/admin-guide/pm/cpufreq.rst for more info
> +  DO_CPU=${CPU_MANAGE:-'0'}
> +  CPU_MAXFREQ=${CPU_MAXFREQ:-'slowest'}
>
> -#
> -# Allowed dirty background ratio, in percent.  Once DIRTY_RATIO has been
> -# exceeded, the kernel will wake flusher threads which will then reduce the
> -# amount of dirty memory to dirty_background_ratio.  Set this nice and low,
> -# so once some writeout has commenced, we do a lot of it.
> -#
> -DIRTY_BACKGROUND_RATIO=${DIRTY_BACKGROUND_RATIO:-'5'}
> +  #
> +  # Allowed dirty background ratio, in percent.  Once DIRTY_RATIO has been
> +  # exceeded, the kernel will wake flusher threads which will then reduce the
> +  # amount of dirty memory to dirty_background_ratio.  Set this nice and low,
> +  # so once some writeout has commenced, we do a lot of it.
> +  #
> +  DIRTY_BACKGROUND_RATIO=${DIRTY_BACKGROUND_RATIO:-'5'}
>
> -# kernel default dirty buffer age
> -DEF_AGE=${DEF_AGE:-'30'}
> -DEF_UPDATE=${DEF_UPDATE:-'5'}
> -DEF_DIRTY_BACKGROUND_RATIO=${DEF_DIRTY_BACKGROUND_RATIO:-'10'}
> -DEF_DIRTY_RATIO=${DEF_DIRTY_RATIO:-'40'}
> -DEF_XFS_AGE_BUFFER=${DEF_XFS_AGE_BUFFER:-'15'}
> -DEF_XFS_SYNC_INTERVAL=${DEF_XFS_SYNC_INTERVAL:-'30'}
> -DEF_XFS_BUFD_INTERVAL=${DEF_XFS_BUFD_INTERVAL:-'1'}
> +  # kernel default dirty buffer age
> +  DEF_AGE=${DEF_AGE:-'30'}
> +  DEF_UPDATE=${DEF_UPDATE:-'5'}
> +  DEF_DIRTY_BACKGROUND_RATIO=${DEF_DIRTY_BACKGROUND_RATIO:-'10'}
> +  DEF_DIRTY_RATIO=${DEF_DIRTY_RATIO:-'40'}
> +  DEF_XFS_AGE_BUFFER=${DEF_XFS_AGE_BUFFER:-'15'}
> +  DEF_XFS_SYNC_INTERVAL=${DEF_XFS_SYNC_INTERVAL:-'30'}
> +  DEF_XFS_BUFD_INTERVAL=${DEF_XFS_BUFD_INTERVAL:-'1'}
>
> -# This must be adjusted manually to the value of HZ in the running kernel
> -# on 2.4, until the XFS people change their 2.4 external interfaces to work in
> -# centisecs. This can be automated, but it's a work in progress that still needs
> -# some fixes. On 2.6 kernels, XFS uses USER_HZ instead of HZ for external
> -# interfaces, and that is currently always set to 100. So you don't need to
> -# change this on 2.6.
> -XFS_HZ=${XFS_HZ:-'100'}
> +  # This must be adjusted manually to the value of HZ in the running kernel
> +  # on 2.4, until the XFS people change their 2.4 external interfaces to work in
> +  # centisecs. This can be automated, but it's a work in progress that still needs
> +  # some fixes. On 2.6 kernels, XFS uses USER_HZ instead of HZ for external
> +  # interfaces, and that is currently always set to 100. So you don't need to
> +  # change this on 2.6.
> +  XFS_HZ=${XFS_HZ:-'100'}
>
> -#############################################################################
> +  #############################################################################
>
> -KLEVEL="$(uname -r |
> -             {
> +  KLEVEL="$(uname -r |
> +               {
>                IFS='.' read a b c
>                echo $a.$b
>              }
> -)"
> -case "$KLEVEL" in
> +  )"
> +  case "$KLEVEL" in
>         "2.4"|"2.6")
>                 ;;
>         *)
>                 echo "Unhandled kernel version: $KLEVEL ('uname -r' = '$(uname -r)')" >&2
>                 exit 1
>                 ;;
> -esac
> +  esac
>
> -if [ ! -e /proc/sys/vm/laptop_mode ] ; then
> +  if [ ! -e /proc/sys/vm/laptop_mode ] ; then
>         echo "Kernel is not patched with laptop_mode patch." >&2
>         exit 1
> -fi
> +  fi
>
> -if [ ! -w /proc/sys/vm/laptop_mode ] ; then
> +  if [ ! -w /proc/sys/vm/laptop_mode ] ; then
>         echo "You do not have enough privileges to enable laptop_mode." >&2
>         exit 1
> -fi
> +  fi
>
> -# Remove an option (the first parameter) of the form option=<number> from
> -# a mount options string (the rest of the parameters).
> -parse_mount_opts () {
> +  # Remove an option (the first parameter) of the form option=<number> from
> +  # a mount options string (the rest of the parameters).
> +  parse_mount_opts () {
>         OPT="$1"
>         shift
>         echo ",$*," | sed               \
> @@ -444,11 +446,11 @@ parse_mount_opts () {
>          -e 's/,,*/,/g'                 \
>          -e 's/^,//'                    \
>          -e 's/,$//'
> -}
> +  }
>
> -# Remove an option (the first parameter) without any arguments from
> -# a mount option string (the rest of the parameters).
> -parse_nonumber_mount_opts () {
> +  # Remove an option (the first parameter) without any arguments from
> +  # a mount option string (the rest of the parameters).
> +  parse_nonumber_mount_opts () {
>         OPT="$1"
>         shift
>         echo ",$*," | sed               \
> @@ -456,20 +458,20 @@ parse_nonumber_mount_opts () {
>          -e 's/,,*/,/g'                 \
>          -e 's/^,//'                    \
>          -e 's/,$//'
> -}
> +  }
>
> -# Find out the state of a yes/no option (e.g. "atime"/"noatime") in
> -# fstab for a given filesystem, and use this state to replace the
> -# value of the option in another mount options string. The device
> -# is the first argument, the option name the second, and the default
> -# value the third. The remainder is the mount options string.
> -#
> -# Example:
> -# parse_yesno_opts_wfstab /dev/hda1 atime atime defaults,noatime
> -#
> -# If fstab contains, say, "rw" for this filesystem, then the result
> -# will be "defaults,atime".
> -parse_yesno_opts_wfstab () {
> +  # Find out the state of a yes/no option (e.g. "atime"/"noatime") in
> +  # fstab for a given filesystem, and use this state to replace the
> +  # value of the option in another mount options string. The device
> +  # is the first argument, the option name the second, and the default
> +  # value the third. The remainder is the mount options string.
> +  #
> +  # Example:
> +  # parse_yesno_opts_wfstab /dev/hda1 atime atime defaults,noatime
> +  #
> +  # If fstab contains, say, "rw" for this filesystem, then the result
> +  # will be "defaults,atime".
> +  parse_yesno_opts_wfstab () {
>         L_DEV="$1"
>         OPT="$2"
>         DEF_OPT="$3"
> @@ -491,21 +493,21 @@ parse_yesno_opts_wfstab () {
>                 # option not specified in fstab -- choose the default.
>                 echo "$PARSEDOPTS1,$DEF_OPT"
>         fi
> -}
> +  }
>
> -# Find out the state of a numbered option (e.g. "commit=NNN") in
> -# fstab for a given filesystem, and use this state to replace the
> -# value of the option in another mount options string. The device
> -# is the first argument, and the option name the second. The
> -# remainder is the mount options string in which the replacement
> -# must be done.
> -#
> -# Example:
> -# parse_mount_opts_wfstab /dev/hda1 commit defaults,commit=7
> -#
> -# If fstab contains, say, "commit=3,rw" for this filesystem, then the
> -# result will be "rw,commit=3".
> -parse_mount_opts_wfstab () {
> +  # Find out the state of a numbered option (e.g. "commit=NNN") in
> +  # fstab for a given filesystem, and use this state to replace the
> +  # value of the option in another mount options string. The device
> +  # is the first argument, and the option name the second. The
> +  # remainder is the mount options string in which the replacement
> +  # must be done.
> +  #
> +  # Example:
> +  # parse_mount_opts_wfstab /dev/hda1 commit defaults,commit=7
> +  #
> +  # If fstab contains, say, "commit=3,rw" for this filesystem, then the
> +  # result will be "rw,commit=3".
> +  parse_mount_opts_wfstab () {
>         L_DEV="$1"
>         OPT="$2"
>         shift 2
> @@ -523,9 +525,9 @@ parse_mount_opts_wfstab () {
>                 # option not specified in fstab: set it to 0
>                 echo "$PARSEDOPTS1,$OPT=0"
>         fi
> -}
> +  }
>
> -deduce_fstype () {
> +  deduce_fstype () {
>         MP="$1"
>         # My root filesystem unfortunately has
>         # type "unknown" in /etc/mtab. If we encounter
> @@ -538,13 +540,13 @@ deduce_fstype () {
>                         exit 0
>                 fi
>         done
> -}
> +  }
>
> -if [ $DO_REMOUNT_NOATIME -eq 1 ] ; then
> +  if [ $DO_REMOUNT_NOATIME -eq 1 ] ; then
>         NOATIME_OPT=",noatime"
> -fi
> +  fi
>
> -case "$1" in
> +  case "$1" in
>         start)
>                 AGE=$((100*$MAX_AGE))
>                 XFS_AGE=$(($XFS_HZ*$MAX_AGE))
> @@ -687,10 +689,9 @@ case "$1" in
>                 exit 1
>                 ;;
>
> -esac
> +  esac
>
> -exit 0
> ---------------------CONTROL SCRIPT END------------------------------------------
> +  exit 0
>
>
>  ACPI integration
> @@ -701,78 +702,76 @@ kick off the laptop_mode script and run hdparm. The part that
>  automatically disables laptop mode when the battery is low was
>  written by Jan Topinski.
>
> ------------------/etc/acpi/events/ac_adapter BEGIN------------------------------
> -event=ac_adapter
> -action=/etc/acpi/actions/ac.sh %e
> -----------------/etc/acpi/events/ac_adapter END---------------------------------
> +/etc/acpi/events/ac_adapter::
>
> +       event=ac_adapter
> +       action=/etc/acpi/actions/ac.sh %e
>
> ------------------/etc/acpi/events/battery BEGIN---------------------------------
> -event=battery.*
> -action=/etc/acpi/actions/battery.sh %e
> -----------------/etc/acpi/events/battery END------------------------------------
> +/etc/acpi/events/battery::
>
> +       event=battery.*
> +       action=/etc/acpi/actions/battery.sh %e
>
> -----------------/etc/acpi/actions/ac.sh BEGIN-----------------------------------
> -#!/bin/bash
> +/etc/acpi/actions/ac.sh::
>
> -# ac on/offline event handler
> +  #!/bin/bash
>
> -status=`awk '/^state: / { print $2 }' /proc/acpi/ac_adapter/$2/state`
> +  # ac on/offline event handler
>
> -case $status in
> -        "on-line")
> -                /sbin/laptop_mode stop
> -                exit 0
> -        ;;
> -        "off-line")
> -                /sbin/laptop_mode start
> -                exit 0
> -        ;;
> -esac
> ----------------------------/etc/acpi/actions/ac.sh END--------------------------
> +  status=`awk '/^state: / { print $2 }' /proc/acpi/ac_adapter/$2/state`
>
> +  case $status in
> +          "on-line")
> +                  /sbin/laptop_mode stop
> +                  exit 0
> +          ;;
> +          "off-line")
> +                  /sbin/laptop_mode start
> +                  exit 0
> +          ;;
> +  esac
>
> ----------------------------/etc/acpi/actions/battery.sh BEGIN-------------------
> -#! /bin/bash
>
> -# Automatically disable laptop mode when the battery almost runs out.
> +/etc/acpi/actions/battery.sh::
>
> -BATT_INFO=/proc/acpi/battery/$2/state
> +  #! /bin/bash
>
> -if [[ -f /proc/sys/vm/laptop_mode ]]
> -then
> -   LM=`cat /proc/sys/vm/laptop_mode`
> -   if [[ $LM -gt 0 ]]
> -   then
> -     if [[ -f $BATT_INFO ]]
> +  # Automatically disable laptop mode when the battery almost runs out.
> +
> +  BATT_INFO=/proc/acpi/battery/$2/state
> +
> +  if [[ -f /proc/sys/vm/laptop_mode ]]
> +  then
> +     LM=`cat /proc/sys/vm/laptop_mode`
> +     if [[ $LM -gt 0 ]]
>       then
> -        # Source the config file only now that we know we need
> -        if [ -f /etc/default/laptop-mode ] ; then
> -                # Debian
> -                . /etc/default/laptop-mode
> -        elif [ -f /etc/sysconfig/laptop-mode ] ; then
> -                # Others
> -                . /etc/sysconfig/laptop-mode
> -        fi
> -        MINIMUM_BATTERY_MINUTES=${MINIMUM_BATTERY_MINUTES:-'10'}
> +       if [[ -f $BATT_INFO ]]
> +       then
> +          # Source the config file only now that we know we need
> +          if [ -f /etc/default/laptop-mode ] ; then
> +                  # Debian
> +                  . /etc/default/laptop-mode
> +          elif [ -f /etc/sysconfig/laptop-mode ] ; then
> +                  # Others
> +                  . /etc/sysconfig/laptop-mode
> +          fi
> +          MINIMUM_BATTERY_MINUTES=${MINIMUM_BATTERY_MINUTES:-'10'}
>
> -        ACTION="`cat $BATT_INFO | grep charging | cut -c 26-`"
> -        if [[ ACTION -eq "discharging" ]]
> -        then
> -           PRESENT_RATE=`cat $BATT_INFO | grep "present rate:" | sed  "s/.* \([0-9][0-9]* \).*/\1/" `
> -           REMAINING=`cat $BATT_INFO | grep "remaining capacity:" | sed  "s/.* \([0-9][0-9]* \).*/\1/" `
> -        fi
> -        if (($REMAINING * 60 / $PRESENT_RATE < $MINIMUM_BATTERY_MINUTES))
> -        then
> -           /sbin/laptop_mode stop
> -        fi
> -     else
> -       logger -p daemon.warning "You are using laptop mode and your battery interface $BATT_INFO is missing. This may lead to loss of data when the battery runs out. Check kernel ACPI support and /proc/acpi/battery folder, and edit /etc/acpi/battery.sh to set BATT_INFO to the correct path."
> +          ACTION="`cat $BATT_INFO | grep charging | cut -c 26-`"
> +          if [[ ACTION -eq "discharging" ]]
> +          then
> +             PRESENT_RATE=`cat $BATT_INFO | grep "present rate:" | sed  "s/.* \([0-9][0-9]* \).*/\1/" `
> +             REMAINING=`cat $BATT_INFO | grep "remaining capacity:" | sed  "s/.* \([0-9][0-9]* \).*/\1/" `
> +          fi
> +          if (($REMAINING * 60 / $PRESENT_RATE < $MINIMUM_BATTERY_MINUTES))
> +          then
> +             /sbin/laptop_mode stop
> +          fi
> +       else
> +         logger -p daemon.warning "You are using laptop mode and your battery interface $BATT_INFO is missing. This may lead to loss of data when the battery runs out. Check kernel ACPI support and /proc/acpi/battery folder, and edit /etc/acpi/battery.sh to set BATT_INFO to the correct path."
> +       fi
>       fi
> -   fi
> -fi
> ----------------------------/etc/acpi/actions/battery.sh END--------------------
> +  fi
>
>
>  Monitoring tool
> diff --git a/Documentation/laptops/sony-laptop.txt b/Documentation/laptops/sony-laptop.rst
> similarity index 85%
> rename from Documentation/laptops/sony-laptop.txt
> rename to Documentation/laptops/sony-laptop.rst
> index 978b1e615155..9edcc7f6612f 100644
> --- a/Documentation/laptops/sony-laptop.txt
> +++ b/Documentation/laptops/sony-laptop.rst
> @@ -1,7 +1,9 @@
> +=========================================
>  Sony Notebook Control Driver (SNC) Readme
> ------------------------------------------
> -       Copyright (C) 2004- 2005 Stelian Pop <stelian@popies.net>
> -       Copyright (C) 2007 Mattia Dongili <malattia@linux.it>
> +=========================================
> +
> +       - Copyright (C) 2004- 2005 Stelian Pop <stelian@popies.net>
> +       - Copyright (C) 2007 Mattia Dongili <malattia@linux.it>
>
>  This mini-driver drives the SNC and SPIC device present in the ACPI BIOS of the
>  Sony Vaio laptops. This driver mixes both devices functions under the same
> @@ -10,6 +12,7 @@ obsoleted by sony-laptop now.
>
>  Fn keys (hotkeys):
>  ------------------
> +
>  Some models report hotkeys through the SNC or SPIC devices, such events are
>  reported both through the ACPI subsystem as acpi events and through the INPUT
>  subsystem. See the logs of /proc/bus/input/devices to find out what those
> @@ -28,11 +31,14 @@ If your laptop model supports it, you will find sysfs files in the
>  /sys/class/backlight/sony/
>  directory. You will be able to query and set the current screen
>  brightness:
> +
> +       ======================  =========================================
>         brightness              get/set screen brightness (an integer
>                                 between 0 and 7)
>         actual_brightness       reading from this file will query the HW
>                                 to get real brightness value
>         max_brightness          the maximum brightness value
> +       ======================  =========================================
>
>
>  Platform specific:
> @@ -45,6 +51,8 @@ You then read/write integer values from/to those files by using
>  standard UNIX tools.
>
>  The files are:
> +
> +       ======================  ==========================================
>         brightness_default      screen brightness which will be set
>                                 when the laptop will be rebooted
>         cdpower                 power on/off the internal CD drive
> @@ -53,21 +61,39 @@ The files are:
>                                 (only in debug mode)
>         bluetoothpower          power on/off the internal bluetooth device
>         fanspeed                get/set the fan speed
> +       ======================  ==========================================
>
>  Note that some files may be missing if they are not supported
>  by your particular laptop model.
>
> -Example usage:
> +Example usage::
> +
>         # echo "1" > /sys/devices/platform/sony-laptop/brightness_default
> -sets the lowest screen brightness for the next and later reboots,
> +
> +sets the lowest screen brightness for the next and later reboots
> +
> +::
> +
>         # echo "8" > /sys/devices/platform/sony-laptop/brightness_default
> -sets the highest screen brightness for the next and later reboots,
> +
> +sets the highest screen brightness for the next and later reboots
> +
> +::
> +
>         # cat /sys/devices/platform/sony-laptop/brightness_default
> -retrieves the value.
> +
> +retrieves the value
> +
> +::
>
>         # echo "0" > /sys/devices/platform/sony-laptop/audiopower
> -powers off the sound card,
> +
> +powers off the sound card
> +
> +::
> +
>         # echo "1" > /sys/devices/platform/sony-laptop/audiopower
> +
>  powers on the sound card.
>
>
> @@ -76,7 +102,8 @@ RFkill control:
>  More recent Vaio models expose a consistent set of ACPI methods to
>  control radio frequency emitting devices. If you are a lucky owner of
>  such a laptop you will find the necessary rfkill devices under
> -/sys/class/rfkill. Check those starting with sony-* in
> +/sys/class/rfkill. Check those starting with sony-* in::
> +
>         # grep . /sys/class/rfkill/*/{state,name}
>
>
> @@ -88,26 +115,29 @@ you are not afraid of any side effects doing strange things with
>  your ACPI BIOS could have on your laptop), load the driver and
>  pass the option 'debug=1'.
>
> -REPEAT: DON'T DO THIS IF YOU DON'T LIKE RISKY BUSINESS.
> +REPEAT:
> +       **DON'T DO THIS IF YOU DON'T LIKE RISKY BUSINESS.**
>
>  In your kernel logs you will find the list of all ACPI methods
>  the SNC device has on your laptop.
>
>  * For new models you will see a long list of meaningless method names,
> -reading the DSDT table source should reveal that:
> +  reading the DSDT table source should reveal that:
> +
>  (1) the SNC device uses an internal capability lookup table
>  (2) SN00 is used to find values in the lookup table
>  (3) SN06 and SN07 are used to call into the real methods based on
>      offsets you can obtain iterating the table using SN00
>  (4) SN02 used to enable events.
> +
>  Some values in the capability lookup table are more or less known, see
>  the code for all sony_call_snc_handle calls, others are more obscure.
>
>  * For old models you can see the GCDP/GCDP methods used to pwer on/off
> -the CD drive, but there are others and they are usually different from
> -model to model.
> +  the CD drive, but there are others and they are usually different from
> +  model to model.
>
> -I HAVE NO IDEA WHAT THOSE METHODS DO.
> +**I HAVE NO IDEA WHAT THOSE METHODS DO.**
>
>  The sony-laptop driver creates, for some of those methods (the most
>  current ones found on several Vaio models), an entry under
> diff --git a/Documentation/laptops/sonypi.txt b/Documentation/laptops/sonypi.rst
> similarity index 87%
> rename from Documentation/laptops/sonypi.txt
> rename to Documentation/laptops/sonypi.rst
> index 606bdb9ce036..2a1975ed7ee4 100644
> --- a/Documentation/laptops/sonypi.txt
> +++ b/Documentation/laptops/sonypi.rst
> @@ -1,11 +1,13 @@
> +==================================================
>  Sony Programmable I/O Control Device Driver Readme
> ---------------------------------------------------
> -       Copyright (C) 2001-2004 Stelian Pop <stelian@popies.net>
> -       Copyright (C) 2001-2002 Alcôve <www.alcove.com>
> -       Copyright (C) 2001 Michael Ashley <m.ashley@unsw.edu.au>
> -       Copyright (C) 2001 Junichi Morita <jun1m@mars.dti.ne.jp>
> -       Copyright (C) 2000 Takaya Kinjo <t-kinjo@tc4.so-net.ne.jp>
> -       Copyright (C) 2000 Andrew Tridgell <tridge@samba.org>
> +==================================================
> +
> +       - Copyright (C) 2001-2004 Stelian Pop <stelian@popies.net>
> +       - Copyright (C) 2001-2002 Alcôve <www.alcove.com>
> +       - Copyright (C) 2001 Michael Ashley <m.ashley@unsw.edu.au>
> +       - Copyright (C) 2001 Junichi Morita <jun1m@mars.dti.ne.jp>
> +       - Copyright (C) 2000 Takaya Kinjo <t-kinjo@tc4.so-net.ne.jp>
> +       - Copyright (C) 2000 Andrew Tridgell <tridge@samba.org>
>
>  This driver enables access to the Sony Programmable I/O Control Device which
>  can be found in many Sony Vaio laptops. Some newer Sony laptops (seems to be
> @@ -14,6 +16,7 @@ sonypi device and are not supported at all by this driver.
>
>  It will give access (through a user space utility) to some events those laptops
>  generate, like:
> +
>         - jogdial events (the small wheel on the side of Vaios)
>         - capture button events (only on Vaio Picturebook series)
>         - Fn keys
> @@ -49,6 +52,7 @@ module argument syntax (<param>=<value> when passing the option to the
>  module or sonypi.<param>=<value> on the kernel boot line when sonypi is
>  statically linked into the kernel). Those options are:
>
> +       =============== =======================================================
>         minor:          minor number of the misc device /dev/sonypi,
>                         default is -1 (automatic allocation, see /proc/misc
>                         or kernel logs)
> @@ -86,6 +90,8 @@ statically linked into the kernel). Those options are:
>                         will be tried. You can use the following bits to
>                         construct your own event mask (from
>                         drivers/char/sonypi.h):
> +
> +                               ========================        ======
>                                 SONYPI_JOGGER_MASK              0x0001
>                                 SONYPI_CAPTURE_MASK             0x0002
>                                 SONYPI_FNKEY_MASK               0x0004
> @@ -100,22 +106,24 @@ statically linked into the kernel). Those options are:
>                                 SONYPI_MEMORYSTICK_MASK         0x0800
>                                 SONYPI_BATTERY_MASK             0x1000
>                                 SONYPI_WIRELESS_MASK            0x2000
> +                               ========================        ======
>
>         useinput:       if set (which is the default) two input devices are
>                         created, one which interprets the jogdial events as
>                         mouse events, the other one which acts like a
>                         keyboard reporting the pressing of the special keys.
> +       =============== =======================================================
>
>  Module use:
>  -----------
>
>  In order to automatically load the sonypi module on use, you can put those
> -lines a configuration file in /etc/modprobe.d/:
> +lines a configuration file in /etc/modprobe.d/::
>
>         alias char-major-10-250 sonypi
>         options sonypi minor=250
>
> -This supposes the use of minor 250 for the sonypi device:
> +This supposes the use of minor 250 for the sonypi device::
>
>         # mknod /dev/sonypi c 10 250
>
> @@ -148,5 +156,5 @@ Bugs:
>           http://www.acc.umu.se/~erikw/program/smartdimmer-0.1.tar.bz2
>
>         - since all development was done by reverse engineering, there is
> -         _absolutely no guarantee_ that this driver will not crash your
> +         *absolutely no guarantee* that this driver will not crash your
>           laptop. Permanently.
> diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.rst
> similarity index 89%
> rename from Documentation/laptops/thinkpad-acpi.txt
> rename to Documentation/laptops/thinkpad-acpi.rst
> index 65719384fc36..d0f0d16c21b9 100644
> --- a/Documentation/laptops/thinkpad-acpi.txt
> +++ b/Documentation/laptops/thinkpad-acpi.rst
> @@ -1,12 +1,15 @@
> -                    ThinkPad ACPI Extras Driver
> +===========================
> +ThinkPad ACPI Extras Driver
> +===========================
>
> -                            Version 0.25
> -                        October 16th,  2013
> +Version 0.25
>
> -               Borislav Deianov <borislav@users.sf.net>
> -             Henrique de Moraes Holschuh <hmh@hmh.eng.br>
> -                      http://ibm-acpi.sf.net/
> +October 16th,  2013
>
> +- Borislav Deianov <borislav@users.sf.net>
> +- Henrique de Moraes Holschuh <hmh@hmh.eng.br>
> +
> +http://ibm-acpi.sf.net/
>
>  This is a Linux driver for the IBM and Lenovo ThinkPad laptops. It
>  supports various features of these laptops which are accessible
> @@ -91,7 +94,8 @@ yet ready or stabilized, it is expected that this interface will change,
>  and any and all userspace programs must deal with it.
>
>
> -Notes about the sysfs interface:
> +Notes about the sysfs interface
> +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
>  Unlike what was done with the procfs interface, correctness when talking
>  to the sysfs interfaces will be enforced, as will correctness in the
> @@ -129,6 +133,7 @@ Driver version
>  --------------
>
>  procfs: /proc/acpi/ibm/driver
> +
>  sysfs driver attribute: version
>
>  The driver name and version. No commands can be written to this file.
> @@ -141,9 +146,13 @@ sysfs driver attribute: interface_version
>
>  Version of the thinkpad-acpi sysfs interface, as an unsigned long
>  (output in hex format: 0xAAAABBCC), where:
> -       AAAA - major revision
> -       BB - minor revision
> -       CC - bugfix revision
> +
> +       AAAA
> +         - major revision
> +       BB
> +         - minor revision
> +       CC
> +         - bugfix revision
>
>  The sysfs interface version changelog for the driver can be found at the
>  end of this document.  Changes to the sysfs interface done by the kernel
> @@ -170,6 +179,7 @@ Hot keys
>  --------
>
>  procfs: /proc/acpi/ibm/hotkey
> +
>  sysfs device attribute: hotkey_*
>
>  In a ThinkPad, the ACPI HKEY handler is responsible for communicating
> @@ -181,7 +191,7 @@ firmware will behave in many situations.
>  The driver enables the HKEY ("hot key") event reporting automatically
>  when loaded, and disables it when it is removed.
>
> -The driver will report HKEY events in the following format:
> +The driver will report HKEY events in the following format::
>
>         ibm/hotkey HKEY 00000080 0000xxxx
>
> @@ -217,9 +227,10 @@ ThinkPads, it is still possible to support some extra hotkeys by
>  polling the "CMOS NVRAM" at least 10 times per second.  The driver
>  attempts to enables this functionality automatically when required.
>
> -procfs notes:
> +procfs notes
> +^^^^^^^^^^^^
>
> -The following commands can be written to the /proc/acpi/ibm/hotkey file:
> +The following commands can be written to the /proc/acpi/ibm/hotkey file::
>
>         echo 0xffffffff > /proc/acpi/ibm/hotkey -- enable all hot keys
>         echo 0 > /proc/acpi/ibm/hotkey -- disable all possible hot keys
> @@ -227,7 +238,7 @@ The following commands can be written to the /proc/acpi/ibm/hotkey file:
>         echo reset > /proc/acpi/ibm/hotkey -- restore the recommended mask
>
>  The following commands have been deprecated and will cause the kernel
> -to log a warning:
> +to log a warning::
>
>         echo enable > /proc/acpi/ibm/hotkey -- does nothing
>         echo disable > /proc/acpi/ibm/hotkey -- returns an error
> @@ -237,7 +248,8 @@ maintain maximum bug-to-bug compatibility, it does not report any masks,
>  nor does it allow one to manipulate the hot key mask when the firmware
>  does not support masks at all, even if NVRAM polling is in use.
>
> -sysfs notes:
> +sysfs notes
> +^^^^^^^^^^^
>
>         hotkey_bios_enabled:
>                 DEPRECATED, WILL BE REMOVED SOON.
> @@ -349,7 +361,8 @@ sysfs notes:
>
>                 This attribute has poll()/select() support.
>
> -input layer notes:
> +input layer notes
> +^^^^^^^^^^^^^^^^^
>
>  A Hot key is mapped to a single input layer EV_KEY event, possibly
>  followed by an EV_MSC MSC_SCAN event that shall contain that key's scan
> @@ -362,11 +375,13 @@ remapping KEY_UNKNOWN keys.
>
>  The events are available in an input device, with the following id:
>
> -       Bus:            BUS_HOST
> -       vendor:         0x1014 (PCI_VENDOR_ID_IBM)  or
> +       ==============  ==============================
> +       Bus             BUS_HOST
> +       vendor          0x1014 (PCI_VENDOR_ID_IBM)  or
>                         0x17aa (PCI_VENDOR_ID_LENOVO)
> -       product:        0x5054 ("TP")
> -       version:        0x4101
> +       product         0x5054 ("TP")
> +       version         0x4101
> +       ==============  ==============================
>
>  The version will have its LSB incremented if the keymap changes in a
>  backwards-compatible way.  The MSB shall always be 0x41 for this input
> @@ -380,9 +395,10 @@ backwards-compatible change for this input device.
>
>  Thinkpad-acpi Hot Key event map (version 0x4101):
>
> +=======        ======= ==============  ==============================================
>  ACPI   Scan
>  event  code    Key             Notes
> -
> +=======        ======= ==============  ==============================================
>  0x1001 0x00    FN+F1           -
>
>  0x1002 0x01    FN+F2           IBM: battery (rare)
> @@ -426,7 +442,9 @@ event       code    Key             Notes
>                                 or toggle screen expand
>
>  0x1009 0x08    FN+F9           -
> -       ..      ..              ..
> +
> +...    ...     ...             ...
> +
>  0x100B 0x0A    FN+F11          -
>
>  0x100C 0x0B    FN+F12          Sleep to disk.  You are always
> @@ -480,8 +498,11 @@ event      code    Key             Notes
>  0x1018 0x17    THINKPAD        ThinkPad/Access IBM/Lenovo key
>
>  0x1019 0x18    unknown
> -..     ..      ..
> +
> +...    ...     ...
> +
>  0x1020 0x1F    unknown
> +=======        ======= ==============  ==============================================
>
>  The ThinkPad firmware does not allow one to differentiate when most hot
>  keys are pressed or released (either that, or we don't know how to, yet).
> @@ -499,14 +520,17 @@ generate input device EV_KEY events.
>  In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW
>  events for switches:
>
> +============== ==============================================
>  SW_RFKILL_ALL  T60 and later hardware rfkill rocker switch
>  SW_TABLET_MODE Tablet ThinkPads HKEY events 0x5009 and 0x500A
> +============== ==============================================
>
> -Non hotkey ACPI HKEY event map:
> --------------------------------
> +Non hotkey ACPI HKEY event map
> +------------------------------
>
>  Events that are never propagated by the driver:
>
> +======         ==================================================
>  0x2304         System is waking up from suspend to undock
>  0x2305         System is waking up from suspend to eject bay
>  0x2404         System is waking up from hibernation to undock
> @@ -519,10 +543,12 @@ Events that are never propagated by the driver:
>  0x6000         KEYBOARD: Numlock key pressed
>  0x6005         KEYBOARD: Fn key pressed (TO BE VERIFIED)
>  0x7000         Radio Switch may have changed state
> +======         ==================================================
>
>
>  Events that are propagated by the driver to userspace:
>
> +======         =====================================================
>  0x2313         ALARM: System is waking up from suspend because
>                 the battery is nearly empty
>  0x2413         ALARM: System is waking up from hibernation because
> @@ -544,6 +570,7 @@ Events that are propagated by the driver to userspace:
>  0x6040         Nvidia Optimus/AC adapter related (TO BE VERIFIED)
>  0x60C0         X1 Yoga 2016, Tablet mode status changed
>  0x60F0         Thermal Transformation changed (GMTS, Windows)
> +======         =====================================================
>
>  Battery nearly empty alarms are a last resort attempt to get the
>  operating system to hibernate or shutdown cleanly (0x2313), or shutdown
> @@ -562,7 +589,8 @@ cycle, or a system shutdown.  Obviously, something is very wrong if this
>  happens.
>
>
> -Brightness hotkey notes:
> +Brightness hotkey notes
> +^^^^^^^^^^^^^^^^^^^^^^^
>
>  Don't mess with the brightness hotkeys in a Thinkpad.  If you want
>  notifications for OSD, use the sysfs backlight class event support.
> @@ -579,7 +607,9 @@ Bluetooth
>  ---------
>
>  procfs: /proc/acpi/ibm/bluetooth
> +
>  sysfs device attribute: bluetooth_enable (deprecated)
> +
>  sysfs rfkill class: switch "tpacpi_bluetooth_sw"
>
>  This feature shows the presence and current state of a ThinkPad
> @@ -588,22 +618,25 @@ Bluetooth device in the internal ThinkPad CDC slot.
>  If the ThinkPad supports it, the Bluetooth state is stored in NVRAM,
>  so it is kept across reboots and power-off.
>
> -Procfs notes:
> +Procfs notes
> +^^^^^^^^^^^^
>
> -If Bluetooth is installed, the following commands can be used:
> +If Bluetooth is installed, the following commands can be used::
>
>         echo enable > /proc/acpi/ibm/bluetooth
>         echo disable > /proc/acpi/ibm/bluetooth
>
> -Sysfs notes:
> +Sysfs notes
> +^^^^^^^^^^^
>
>         If the Bluetooth CDC card is installed, it can be enabled /
>         disabled through the "bluetooth_enable" thinkpad-acpi device
>         attribute, and its current status can also be queried.
>
>         enable:
> -               0: disables Bluetooth / Bluetooth is disabled
> -               1: enables Bluetooth / Bluetooth is enabled.
> +
> +               - 0: disables Bluetooth / Bluetooth is disabled
> +               - 1: enables Bluetooth / Bluetooth is enabled.
>
>         Note: this interface has been superseded by the generic rfkill
>         class.  It has been deprecated, and it will be removed in year
> @@ -617,7 +650,7 @@ Video output control -- /proc/acpi/ibm/video
>  --------------------------------------------
>
>  This feature allows control over the devices used for video output -
> -LCD, CRT or DVI (if available). The following commands are available:
> +LCD, CRT or DVI (if available). The following commands are available::
>
>         echo lcd_enable > /proc/acpi/ibm/video
>         echo lcd_disable > /proc/acpi/ibm/video
> @@ -630,9 +663,10 @@ LCD, CRT or DVI (if available). The following commands are available:
>         echo expand_toggle > /proc/acpi/ibm/video
>         echo video_switch > /proc/acpi/ibm/video
>
> -NOTE: Access to this feature is restricted to processes owning the
> -CAP_SYS_ADMIN capability for safety reasons, as it can interact badly
> -enough with some versions of X.org to crash it.
> +NOTE:
> +  Access to this feature is restricted to processes owning the
> +  CAP_SYS_ADMIN capability for safety reasons, as it can interact badly
> +  enough with some versions of X.org to crash it.
>
>  Each video output device can be enabled or disabled individually.
>  Reading /proc/acpi/ibm/video shows the status of each device.
> @@ -665,18 +699,21 @@ ThinkLight control
>  ------------------
>
>  procfs: /proc/acpi/ibm/light
> +
>  sysfs attributes: as per LED class, for the "tpacpi::thinklight" LED
>
> -procfs notes:
> +procfs notes
> +^^^^^^^^^^^^
>
>  The ThinkLight status can be read and set through the procfs interface.  A
>  few models which do not make the status available will show the ThinkLight
> -status as "unknown". The available commands are:
> +status as "unknown". The available commands are::
>
>         echo on  > /proc/acpi/ibm/light
>         echo off > /proc/acpi/ibm/light
>
> -sysfs notes:
> +sysfs notes
> +^^^^^^^^^^^
>
>  The ThinkLight sysfs interface is documented by the LED class
>  documentation, in Documentation/leds/leds-class.rst.  The ThinkLight LED name
> @@ -691,6 +728,7 @@ CMOS/UCMS control
>  -----------------
>
>  procfs: /proc/acpi/ibm/cmos
> +
>  sysfs device attribute: cmos_command
>
>  This feature is mostly used internally by the ACPI firmware to keep the legacy
> @@ -707,16 +745,16 @@ The range of valid cmos command numbers is 0 to 21, but not all have an
>  effect and the behavior varies from model to model.  Here is the behavior
>  on the X40 (tpb is the ThinkPad Buttons utility):
>
> -       0 - Related to "Volume down" key press
> -       1 - Related to "Volume up" key press
> -       2 - Related to "Mute on" key press
> -       3 - Related to "Access IBM" key press
> -       4 - Related to "LCD brightness up" key press
> -       5 - Related to "LCD brightness down" key press
> -       11 - Related to "toggle screen expansion" key press/function
> -       12 - Related to "ThinkLight on"
> -       13 - Related to "ThinkLight off"
> -       14 - Related to "ThinkLight" key press (toggle ThinkLight)
> +       - 0 - Related to "Volume down" key press
> +       - 1 - Related to "Volume up" key press
> +       - 2 - Related to "Mute on" key press
> +       - 3 - Related to "Access IBM" key press
> +       - 4 - Related to "LCD brightness up" key press
> +       - 5 - Related to "LCD brightness down" key press
> +       - 11 - Related to "toggle screen expansion" key press/function
> +       - 12 - Related to "ThinkLight on"
> +       - 13 - Related to "ThinkLight off"
> +       - 14 - Related to "ThinkLight" key press (toggle ThinkLight)
>
>  The cmos command interface is prone to firmware split-brain problems, as
>  in newer ThinkPads it is just a compatibility layer.  Do not use it, it is
> @@ -748,9 +786,10 @@ are aware of the consequences are welcome to enabling it.
>  Audio mute and microphone mute LEDs are supported, but currently not
>  visible to userspace. They are used by the snd-hda-intel audio driver.
>
> -procfs notes:
> +procfs notes
> +^^^^^^^^^^^^
>
> -The available commands are:
> +The available commands are::
>
>         echo '<LED number> on' >/proc/acpi/ibm/led
>         echo '<LED number> off' >/proc/acpi/ibm/led
> @@ -760,23 +799,24 @@ The <LED number> range is 0 to 15. The set of LEDs that can be
>  controlled varies from model to model. Here is the common ThinkPad
>  mapping:
>
> -       0 - power
> -       1 - battery (orange)
> -       2 - battery (green)
> -       3 - UltraBase/dock
> -       4 - UltraBay
> -       5 - UltraBase battery slot
> -       6 - (unknown)
> -       7 - standby
> -       8 - dock status 1
> -       9 - dock status 2
> -       10, 11 - (unknown)
> -       12 - thinkvantage
> -       13, 14, 15 - (unknown)
> +       - 0 - power
> +       - 1 - battery (orange)
> +       - 2 - battery (green)
> +       - 3 - UltraBase/dock
> +       - 4 - UltraBay
> +       - 5 - UltraBase battery slot
> +       - 6 - (unknown)
> +       - 7 - standby
> +       - 8 - dock status 1
> +       - 9 - dock status 2
> +       - 10, 11 - (unknown)
> +       - 12 - thinkvantage
> +       - 13, 14, 15 - (unknown)
>
>  All of the above can be turned on and off and can be made to blink.
>
> -sysfs notes:
> +sysfs notes
> +^^^^^^^^^^^
>
>  The ThinkPad LED sysfs interface is described in detail by the LED class
>  documentation, in Documentation/leds/leds-class.rst.
> @@ -815,7 +855,7 @@ The BEEP method is used internally by the ACPI firmware to provide
>  audible alerts in various situations. This feature allows the same
>  sounds to be triggered manually.
>
> -The commands are non-negative integer numbers:
> +The commands are non-negative integer numbers::
>
>         echo <number> >/proc/acpi/ibm/beep
>
> @@ -823,25 +863,26 @@ The valid <number> range is 0 to 17. Not all numbers trigger sounds
>  and the sounds vary from model to model. Here is the behavior on the
>  X40:
>
> -       0 - stop a sound in progress (but use 17 to stop 16)
> -       2 - two beeps, pause, third beep ("low battery")
> -       3 - single beep
> -       4 - high, followed by low-pitched beep ("unable")
> -       5 - single beep
> -       6 - very high, followed by high-pitched beep ("AC/DC")
> -       7 - high-pitched beep
> -       9 - three short beeps
> -       10 - very long beep
> -       12 - low-pitched beep
> -       15 - three high-pitched beeps repeating constantly, stop with 0
> -       16 - one medium-pitched beep repeating constantly, stop with 17
> -       17 - stop 16
> +       - 0 - stop a sound in progress (but use 17 to stop 16)
> +       - 2 - two beeps, pause, third beep ("low battery")
> +       - 3 - single beep
> +       - 4 - high, followed by low-pitched beep ("unable")
> +       - 5 - single beep
> +       - 6 - very high, followed by high-pitched beep ("AC/DC")
> +       - 7 - high-pitched beep
> +       - 9 - three short beeps
> +       - 10 - very long beep
> +       - 12 - low-pitched beep
> +       - 15 - three high-pitched beeps repeating constantly, stop with 0
> +       - 16 - one medium-pitched beep repeating constantly, stop with 17
> +       - 17 - stop 16
>
>
>  Temperature sensors
>  -------------------
>
>  procfs: /proc/acpi/ibm/thermal
> +
>  sysfs device attributes: (hwmon "thinkpad") temp*_input
>
>  Most ThinkPads include six or more separate temperature sensors but only
> @@ -850,10 +891,14 @@ feature shows readings from up to eight different sensors on older
>  ThinkPads, and up to sixteen different sensors on newer ThinkPads.
>
>  For example, on the X40, a typical output may be:
> -temperatures:   42 42 45 41 36 -128 33 -128
> +
> +temperatures:
> +       42 42 45 41 36 -128 33 -128
>
>  On the T43/p, a typical output may be:
> -temperatures:   48 48 36 52 38 -128 31 -128 48 52 48 -128 -128 -128 -128 -128
> +
> +temperatures:
> +       48 48 36 52 38 -128 31 -128 48 52 48 -128 -128 -128 -128 -128
>
>  The mapping of thermal sensors to physical locations varies depending on
>  system-board model (and thus, on ThinkPad model).
> @@ -863,46 +908,53 @@ tries to track down these locations for various models.
>
>  Most (newer?) models seem to follow this pattern:
>
> -1:  CPU
> -2:  (depends on model)
> -3:  (depends on model)
> -4:  GPU
> -5:  Main battery: main sensor
> -6:  Bay battery: main sensor
> -7:  Main battery: secondary sensor
> -8:  Bay battery: secondary sensor
> -9-15: (depends on model)
> +- 1:  CPU
> +- 2:  (depends on model)
> +- 3:  (depends on model)
> +- 4:  GPU
> +- 5:  Main battery: main sensor
> +- 6:  Bay battery: main sensor
> +- 7:  Main battery: secondary sensor
> +- 8:  Bay battery: secondary sensor
> +- 9-15: (depends on model)
>
>  For the R51 (source: Thomas Gruber):
> -2:  Mini-PCI
> -3:  Internal HDD
> +
> +- 2:  Mini-PCI
> +- 3:  Internal HDD
>
>  For the T43, T43/p (source: Shmidoax/Thinkwiki.org)
>  http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p
> -2:  System board, left side (near PCMCIA slot), reported as HDAPS temp
> -3:  PCMCIA slot
> -9:  MCH (northbridge) to DRAM Bus
> -10: Clock-generator, mini-pci card and ICH (southbridge), under Mini-PCI
> -    card, under touchpad
> -11: Power regulator, underside of system board, below F2 key
> +
> +- 2:  System board, left side (near PCMCIA slot), reported as HDAPS temp
> +- 3:  PCMCIA slot
> +- 9:  MCH (northbridge) to DRAM Bus
> +- 10: Clock-generator, mini-pci card and ICH (southbridge), under Mini-PCI
> +      card, under touchpad
> +- 11: Power regulator, underside of system board, below F2 key
>
>  The A31 has a very atypical layout for the thermal sensors
>  (source: Milos Popovic, http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_A31)
> -1:  CPU
> -2:  Main Battery: main sensor
> -3:  Power Converter
> -4:  Bay Battery: main sensor
> -5:  MCH (northbridge)
> -6:  PCMCIA/ambient
> -7:  Main Battery: secondary sensor
> -8:  Bay Battery: secondary sensor
>
> +- 1:  CPU
> +- 2:  Main Battery: main sensor
> +- 3:  Power Converter
> +- 4:  Bay Battery: main sensor
> +- 5:  MCH (northbridge)
> +- 6:  PCMCIA/ambient
> +- 7:  Main Battery: secondary sensor
> +- 8:  Bay Battery: secondary sensor
> +
> +
> +Procfs notes
> +^^^^^^^^^^^^
>
> -Procfs notes:
>         Readings from sensors that are not available return -128.
>         No commands can be written to this file.
>
> -Sysfs notes:
> +Sysfs notes
> +^^^^^^^^^^^
> +
>         Sensors that are not available return the ENXIO error.  This
>         status may change at runtime, as there are hotplug thermal
>         sensors, like those inside the batteries and docks.
> @@ -921,6 +973,7 @@ ftp://ftp.suse.com/pub/people/trenn/sources/ec
>
>  Use it to determine the register holding the fan
>  speed on some models. To do that, do the following:
> +
>         - make sure the battery is fully charged
>         - make sure the fan is running
>         - use above mentioned tool to read out the EC
> @@ -941,6 +994,7 @@ LCD brightness control
>  ----------------------
>
>  procfs: /proc/acpi/ibm/brightness
> +
>  sysfs backlight device "thinkpad_screen"
>
>  This feature allows software control of the LCD brightness on ThinkPad
> @@ -985,15 +1039,17 @@ brightness_enable=0 forces it to be disabled.  brightness_enable=1
>  forces it to be enabled when available, even if the standard ACPI
>  interface is also available.
>
> -Procfs notes:
> +Procfs notes
> +^^^^^^^^^^^^
>
> -       The available commands are:
> +The available commands are::
>
>         echo up   >/proc/acpi/ibm/brightness
>         echo down >/proc/acpi/ibm/brightness
>         echo 'level <level>' >/proc/acpi/ibm/brightness
>
> -Sysfs notes:
> +Sysfs notes
> +^^^^^^^^^^^
>
>  The interface is implemented through the backlight sysfs class, which is
>  poorly documented at this time.
> @@ -1038,6 +1094,7 @@ Volume control (Console Audio control)
>  --------------------------------------
>
>  procfs: /proc/acpi/ibm/volume
> +
>  ALSA: "ThinkPad Console Audio Control", default ID: "ThinkPadEC"
>
>  NOTE: by default, the volume control interface operates in read-only
> @@ -1053,7 +1110,8 @@ Software volume control should be done only in the main AC97/HDA
>  mixer.
>
>
> -About the ThinkPad Console Audio control:
> +About the ThinkPad Console Audio control
> +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
>  ThinkPads have a built-in amplifier and muting circuit that drives the
>  console headphone and speakers.  This circuit is after the main AC97
> @@ -1092,13 +1150,14 @@ normal key presses to the operating system (thinkpad-acpi is not
>  involved).
>
>
> -The ThinkPad-ACPI volume control:
> +The ThinkPad-ACPI volume control
> +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
>  The preferred way to interact with the Console Audio control is the
>  ALSA interface.
>
>  The legacy procfs interface allows one to read the current state,
> -and if volume control is enabled, accepts the following commands:
> +and if volume control is enabled, accepts the following commands::
>
>         echo up   >/proc/acpi/ibm/volume
>         echo down >/proc/acpi/ibm/volume
> @@ -1137,13 +1196,15 @@ Fan control and monitoring: fan speed, fan enable/disable
>  ---------------------------------------------------------
>
>  procfs: /proc/acpi/ibm/fan
> -sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1,
> -                         pwm1_enable, fan2_input
> +
> +sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1, pwm1_enable, fan2_input
> +
>  sysfs hwmon driver attributes: fan_watchdog
>
> -NOTE NOTE NOTE: fan control operations are disabled by default for
> -safety reasons.  To enable them, the module parameter "fan_control=1"
> -must be given to thinkpad-acpi.
> +NOTE NOTE NOTE:
> +   fan control operations are disabled by default for
> +   safety reasons.  To enable them, the module parameter "fan_control=1"
> +   must be given to thinkpad-acpi.
>
>  This feature attempts to show the current fan speed, control mode and
>  other fan data that might be available.  The speed is read directly
> @@ -1154,7 +1215,8 @@ value on other models.
>  Some Lenovo ThinkPads support a secondary fan.  This fan cannot be
>  controlled separately, it shares the main fan control.
>
> -Fan levels:
> +Fan levels
> +^^^^^^^^^^
>
>  Most ThinkPad fans work in "levels" at the firmware interface.  Level 0
>  stops the fan.  The higher the level, the higher the fan speed, although
> @@ -1209,9 +1271,10 @@ therefore, not suitable to protect against fan mode changes made through
>  means other than the "enable", "disable", and "level" procfs fan
>  commands, or the hwmon fan control sysfs interface.
>
> -Procfs notes:
> +Procfs notes
> +^^^^^^^^^^^^
>
> -The fan may be enabled or disabled with the following commands:
> +The fan may be enabled or disabled with the following commands::
>
>         echo enable  >/proc/acpi/ibm/fan
>         echo disable >/proc/acpi/ibm/fan
> @@ -1219,7 +1282,7 @@ The fan may be enabled or disabled with the following commands:
>  Placing a fan on level 0 is the same as disabling it.  Enabling a fan
>  will try to place it in a safe level if it is too slow or disabled.
>
> -The fan level can be controlled with the command:
> +The fan level can be controlled with the command::
>
>         echo 'level <level>' > /proc/acpi/ibm/fan
>
> @@ -1231,7 +1294,7 @@ compatibility.
>
>  On the X31 and X40 (and ONLY on those models), the fan speed can be
>  controlled to a certain degree.  Once the fan is running, it can be
> -forced to run faster or slower with the following command:
> +forced to run faster or slower with the following command::
>
>         echo 'speed <speed>' > /proc/acpi/ibm/fan
>
> @@ -1241,13 +1304,14 @@ effect or the fan speed eventually settles somewhere in that range.  The
>  fan cannot be stopped or started with this command.  This functionality
>  is incomplete, and not available through the sysfs interface.
>
> -To program the safety watchdog, use the "watchdog" command.
> +To program the safety watchdog, use the "watchdog" command::
>
>         echo 'watchdog <interval in seconds>' > /proc/acpi/ibm/fan
>
>  If you want to disable the watchdog, use 0 as the interval.
>
> -Sysfs notes:
> +Sysfs notes
> +^^^^^^^^^^^
>
>  The sysfs interface follows the hwmon subsystem guidelines for the most
>  part, and the exception is the fan safety watchdog.
> @@ -1261,10 +1325,10 @@ to the firmware).
>  Features not yet implemented by the driver return ENOSYS.
>
>  hwmon device attribute pwm1_enable:
> -       0: PWM offline (fan is set to full-speed mode)
> -       1: Manual PWM control (use pwm1 to set fan level)
> -       2: Hardware PWM control (EC "auto" mode)
> -       3: reserved (Software PWM control, not implemented yet)
> +       - 0: PWM offline (fan is set to full-speed mode)
> +       - 1: Manual PWM control (use pwm1 to set fan level)
> +       - 2: Hardware PWM control (EC "auto" mode)
> +       - 3: reserved (Software PWM control, not implemented yet)
>
>         Modes 0 and 2 are not supported by all ThinkPads, and the
>         driver is not always able to detect this.  If it does know a
> @@ -1304,7 +1368,9 @@ WAN
>  ---
>
>  procfs: /proc/acpi/ibm/wan
> +
>  sysfs device attribute: wwan_enable (deprecated)
> +
>  sysfs rfkill class: switch "tpacpi_wwan_sw"
>
>  This feature shows the presence and current state of the built-in
> @@ -1316,22 +1382,24 @@ so it is kept across reboots and power-off.
>  It was tested on a Lenovo ThinkPad X60. It should probably work on other
>  ThinkPad models which come with this module installed.
>
> -Procfs notes:
> +Procfs notes
> +^^^^^^^^^^^^
>
> -If the W-WAN card is installed, the following commands can be used:
> +If the W-WAN card is installed, the following commands can be used::
>
>         echo enable > /proc/acpi/ibm/wan
>         echo disable > /proc/acpi/ibm/wan
>
> -Sysfs notes:
> +Sysfs notes
> +^^^^^^^^^^^
>
>         If the W-WAN card is installed, it can be enabled /
>         disabled through the "wwan_enable" thinkpad-acpi device
>         attribute, and its current status can also be queried.
>
>         enable:
> -               0: disables WWAN card / WWAN card is disabled
> -               1: enables WWAN card / WWAN card is enabled.
> +               - 0: disables WWAN card / WWAN card is disabled
> +               - 1: enables WWAN card / WWAN card is enabled.
>
>         Note: this interface has been superseded by the generic rfkill
>         class.  It has been deprecated, and it will be removed in year
> @@ -1354,7 +1422,8 @@ sysfs rfkill class: switch "tpacpi_uwb_sw"
>  This feature exports an rfkill controller for the UWB device, if one is
>  present and enabled in the BIOS.
>
> -Sysfs notes:
> +Sysfs notes
> +^^^^^^^^^^^
>
>         rfkill controller switch "tpacpi_uwb_sw": refer to
>         Documentation/rfkill.rst for details.
> @@ -1368,11 +1437,11 @@ This sysfs attribute controls the keyboard "face" that will be shown on the
>  Lenovo X1 Carbon 2nd gen (2014)'s adaptive keyboard. The value can be read
>  and set.
>
> -1 = Home mode
> -2 = Web-browser mode
> -3 = Web-conference mode
> -4 = Function mode
> -5 = Layflat mode
> +- 1 = Home mode
> +- 2 = Web-browser mode
> +- 3 = Web-conference mode
> +- 4 = Function mode
> +- 5 = Layflat mode
>
>  For more details about which buttons will appear depending on the mode, please
>  review the laptop's user guide:
> @@ -1382,13 +1451,13 @@ Multiple Commands, Module Parameters
>  ------------------------------------
>
>  Multiple commands can be written to the proc files in one shot by
> -separating them with commas, for example:
> +separating them with commas, for example::
>
>         echo enable,0xffff > /proc/acpi/ibm/hotkey
>         echo lcd_disable,crt_enable > /proc/acpi/ibm/video
>
>  Commands can also be specified when loading the thinkpad-acpi module,
> -for example:
> +for example::
>
>         modprobe thinkpad_acpi hotkey=enable,0xffff video=auto_disable
>
> @@ -1397,14 +1466,16 @@ Enabling debugging output
>  -------------------------
>
>  The module takes a debug parameter which can be used to selectively
> -enable various classes of debugging output, for example:
> +enable various classes of debugging output, for example::
>
>          modprobe thinkpad_acpi debug=0xffff
>
>  will enable all debugging output classes.  It takes a bitmask, so
>  to enable more than one output class, just add their values.
>
> +       =============           ======================================
>         Debug bitmask           Description
> +       =============           ======================================
>         0x8000                  Disclose PID of userspace programs
>                                 accessing some functions of the driver
>         0x0001                  Initialization and probing
> @@ -1415,6 +1486,7 @@ to enable more than one output class, just add their values.
>         0x0010                  Fan control
>         0x0020                  Backlight brightness
>         0x0040                  Audio mixer/volume control
> +       =============           ======================================
>
>  There is also a kernel build option to enable more debugging
>  information, which may be necessary to debug driver problems.
> @@ -1432,8 +1504,10 @@ the module parameter force_load=1.  Regardless of whether this works or
>  not, please contact ibm-acpi-devel@lists.sourceforge.net with a report.
>
>
> -Sysfs interface changelog:
> +Sysfs interface changelog
> +^^^^^^^^^^^^^^^^^^^^^^^^^
>
> +=========      ===============================================================
>  0x000100:      Initial sysfs support, as a single platform driver and
>                 device.
>  0x000200:      Hot key support for 32 hot keys, and radio slider switch
> @@ -1485,3 +1559,4 @@ Sysfs interface changelog:
>  0x030000:      Thermal and fan sysfs attributes were moved to the hwmon
>                 device instead of being attached to the backing platform
>                 device.
> +=========      ===============================================================
> diff --git a/Documentation/laptops/toshiba_haps.txt b/Documentation/laptops/toshiba_haps.rst
> similarity index 60%
> rename from Documentation/laptops/toshiba_haps.txt
> rename to Documentation/laptops/toshiba_haps.rst
> index 0c1d88dedbde..11dfc428c080 100644
> --- a/Documentation/laptops/toshiba_haps.txt
> +++ b/Documentation/laptops/toshiba_haps.rst
> @@ -1,18 +1,19 @@
> -Kernel driver toshiba_haps
> +====================================
>  Toshiba HDD Active Protection Sensor
>  ====================================
>
> +Kernel driver: toshiba_haps
> +
>  Author: Azael Avalos <coproscefalo@gmail.com>
>
>
> -0. Contents
> ------------
> +.. 0. Contents
>
> -1. Description
> -2. Interface
> -3. Accelerometer axes
> -4. Supported devices
> -5. Usage
> +   1. Description
> +   2. Interface
> +   3. Accelerometer axes
> +   4. Supported devices
> +   5. Usage
>
>
>  1. Description
> @@ -32,17 +33,20 @@ file to set the desired protection level or sensor sensibility.
>  ------------
>
>  This device comes with 3 methods:
> -_STA -  Checks existence of the device, returning Zero if the device does not
> +
> +====   =====================================================================
> +_STA    Checks existence of the device, returning Zero if the device does not
>         exists or is not supported.
> -PTLV -  Sets the desired protection level.
> -RSSS -  Shuts down the HDD protection interface for a few seconds,
> +PTLV    Sets the desired protection level.
> +RSSS    Shuts down the HDD protection interface for a few seconds,
>         then restores normal operation.
> +====   =====================================================================
>
>  Note:
> -The presence of Solid State Drives (SSD) can make this driver to fail loading,
> -given the fact that such drives have no movable parts, and thus, not requiring
> -any "protection" as well as failing during the evaluation of the _STA method
> -found under this device.
> +  The presence of Solid State Drives (SSD) can make this driver to fail loading,
> +  given the fact that such drives have no movable parts, and thus, not requiring
> +  any "protection" as well as failing during the evaluation of the _STA method
> +  found under this device.
>
>
>  3. Accelerometer axes
> @@ -66,11 +70,18 @@ conventional HDD and not only SSD, or a combination of both HDD and SSD.
>  --------
>
>  The sysfs files under /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS620A:00/ are:
> -protection_level - The protection_level is readable and writeable, and
> +
> +================   ============================================================
> +protection_level   The protection_level is readable and writeable, and
>                    provides a way to let userspace query the current protection
>                    level, as well as set the desired protection level, the
>                    available protection levels are:
> -                  0 - Disabled | 1 - Low | 2 - Medium | 3 - High
> -reset_protection - The reset_protection entry is writeable only, being "1"
> +
> +                  ============   =======   ==========   ========
> +                  0 - Disabled   1 - Low   2 - Medium   3 - High
> +                  ============   =======   ==========   ========
> +
> +reset_protection   The reset_protection entry is writeable only, being "1"
>                    the only parameter it accepts, it is used to trigger
>                    a reset of the protection interface.
> +================   ============================================================
> diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
> index 6758767c85a8..f10245b06b0e 100644
> --- a/Documentation/sysctl/vm.txt
> +++ b/Documentation/sysctl/vm.txt
> @@ -102,7 +102,7 @@ Changing this takes effect whenever an application requests memory.
>  block_dump
>
>  block_dump enables block I/O debugging when set to a nonzero value. More
> -information on block I/O debugging is in Documentation/laptops/laptop-mode.txt.
> +information on block I/O debugging is in Documentation/laptops/laptop-mode.rst.
>
>  ==============================================================
>
> @@ -286,7 +286,7 @@ shared memory segment using hugetlb page.
>  laptop_mode
>
>  laptop_mode is a knob that controls "laptop mode". All the things that are
> -controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt.
> +controlled by this knob are discussed in Documentation/laptops/laptop-mode.rst.
>
>  ==============================================================
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 6696779c0826..262dab70cbbf 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14565,7 +14565,7 @@ M:      Mattia Dongili <malattia@linux.it>
>  L:     platform-driver-x86@vger.kernel.org
>  W:     http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
>  S:     Maintained
> -F:     Documentation/laptops/sony-laptop.txt
> +F:     Documentation/laptops/sony-laptop.rst
>  F:     drivers/char/sonypi.c
>  F:     drivers/platform/x86/sony-laptop.c
>  F:     include/linux/sony-laptop.h
> diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
> index 110824a27510..ba90034f5b8f 100644
> --- a/drivers/char/Kconfig
> +++ b/drivers/char/Kconfig
> @@ -382,7 +382,7 @@ config SONYPI
>           Device which can be found in many (all ?) Sony Vaio laptops.
>
>           If you have one of those laptops, read
> -         <file:Documentation/laptops/sonypi.txt>, and say Y or M here.
> +         <file:Documentation/laptops/sonypi.rst>, and say Y or M here.
>
>           To compile this driver as a module, choose M here: the
>           module will be called sonypi.
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 91b63cd4d48d..aa620324b1d9 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -450,7 +450,7 @@ config SONY_LAPTOP
>           screen brightness control, Fn keys and allows powering on/off some
>           devices.
>
> -         Read <file:Documentation/laptops/sony-laptop.txt> for more information.
> +         Read <file:Documentation/laptops/sony-laptop.rst> for more information.
>
>  config SONYPI_COMPAT
>         bool "Sonypi compatibility"
> @@ -502,7 +502,7 @@ config THINKPAD_ACPI
>           support for Fn-Fx key combinations, Bluetooth control, video
>           output switching, ThinkLight control, UltraBay eject and more.
>           For more information about this driver see
> -         <file:Documentation/laptops/thinkpad-acpi.txt> and
> +         <file:Documentation/laptops/thinkpad-acpi.rst> and
>           <http://ibm-acpi.sf.net/> .
>
>           This driver was formerly known as ibm-acpi.
> --
> 2.20.1
>


-- 
With Best Regards,
Andy Shevchenko

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 13/79] docs: fb: convert docs to ReST and rename to *.rst
  2019-04-22 13:27   ` [PATCH v2 13/79] docs: fb: " Mauro Carvalho Chehab
@ 2019-05-06 13:40     ` Bartlomiej Zolnierkiewicz
  0 siblings, 0 replies; 124+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2019-05-06 13:40 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Maik Broemme, Thomas Winischhofer,
	Sudip Mukherjee, Teddy Wang, Bernie Thompson, Michal Januszewski,
	Greg Kroah-Hartman, Jiri Slaby, dri-devel, linux-fbdev


On 04/22/2019 03:27 PM, Mauro Carvalho Chehab wrote:
> The conversion is actually:
>   - add blank lines and identation in order to identify paragraphs;
>   - fix tables markups;
>   - add some lists markups;
>   - mark literal blocks;
>   - adjust title markups.
> 
> At its new index.rst, let's add a :orphan: while this is not linked to
> the main index.rst file, in order to avoid build warnings.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 45/79] docs: console.txt: convert docs to ReST and rename to *.rst
  2019-04-22 13:27   ` [PATCH v2 45/79] docs: console.txt: " Mauro Carvalho Chehab
@ 2019-05-06 13:41     ` Bartlomiej Zolnierkiewicz
  0 siblings, 0 replies; 124+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2019-05-06 13:41 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Greg Kroah-Hartman, Jiri Slaby, dri-devel,
	linux-fbdev


On 04/22/2019 03:27 PM, Mauro Carvalho Chehab wrote:
> Convert this small file to ReST in preparation for adding it to
> the driver-api book.
> 
> While this is not part of the driver-api book, mark it as
> :orphan:, in order to avoid build warnings.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 57/79] docs: accounting: convert to ReST
  2019-04-22 13:27   ` [PATCH v2 57/79] docs: accounting: convert to ReST Mauro Carvalho Chehab
@ 2019-05-06 15:46     ` Tejun Heo
  0 siblings, 0 replies; 124+ messages in thread
From: Tejun Heo @ 2019-05-06 15:46 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Balbir Singh, Li Zefan, Johannes Weiner,
	cgroups

On Mon, Apr 22, 2019 at 10:27:46AM -0300, Mauro Carvalho Chehab wrote:
> Rename the accounting documentation files to ReST, add an
> index for them and adjust in order to produce a nice html
> output via the Sphinx build system.
> 
> At its new index.rst, let's add a :orphan: while this is not linked to
> the main index.rst file, in order to avoid build warnings.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Acked-by: Tejun Heo <tj@kernel.org>

Thanks.

-- 
tejun

^ permalink raw reply	[flat|nested] 124+ messages in thread

* Re: [PATCH v2 08/79] docs: cgroup-v1: convert docs to ReST and rename to *.rst
  2019-04-22 13:26   ` [PATCH v2 08/79] docs: cgroup-v1: " Mauro Carvalho Chehab
@ 2019-05-06 15:47     ` Tejun Heo
  0 siblings, 0 replies; 124+ messages in thread
From: Tejun Heo @ 2019-05-06 15:47 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Linux Doc Mailing List, Mauro Carvalho Chehab, linux-kernel,
	Jonathan Corbet, Thomas Gleixner, Ingo Molnar, Borislav Petkov,
	H. Peter Anvin, x86, Jens Axboe, Li Zefan, Johannes Weiner,
	Alexei Starovoitov, Daniel Borkmann, Martin KaFai Lau, Song Liu,
	Yonghong Song, James Morris, Serge E. Hallyn, linux-block,
	cgroups, netdev, bpf, linux-security-module

On Mon, Apr 22, 2019 at 10:26:57AM -0300, Mauro Carvalho Chehab wrote:
> Convert the cgroup-v1 files to ReST format, in order to
> allow a later addition to the admin-guide.
> 
> The conversion is actually:
>   - add blank lines and identation in order to identify paragraphs;
>   - fix tables markups;
>   - add some lists markups;
>   - mark literal blocks;
>   - adjust title markups.
> 
> At its new index.rst, let's add a :orphan: while this is not linked to
> the main index.rst file, in order to avoid build warnings.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Acked-by: Tejun Heo <tj@kernel.org>

Please feel free to route with other patches in the series.

Thanks.

-- 
tejun

^ permalink raw reply	[flat|nested] 124+ messages in thread

end of thread, other threads:[~2019-05-06 15:47 UTC | newest]

Thread overview: 124+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20190423132100.GB7132@redhat.com>
2019-04-22 13:26 ` [PATCH v2 00/79] Convert files to ReST Mauro Carvalho Chehab
2019-04-22 13:26   ` [PATCH v2 01/79] docs: core-api: fix broken references for div64.c and gcd.c Mauro Carvalho Chehab
2019-04-22 13:26   ` [PATCH v2 02/79] docs: trace: fix some Sphinx warnings Mauro Carvalho Chehab
2019-04-24 15:10     ` Steven Rostedt
2019-04-22 13:26   ` [PATCH v2 03/79] scripts/documentation-file-ref-check: don't parse Next/ dir Mauro Carvalho Chehab
2019-04-22 13:26   ` [PATCH v2 04/79] docs: aoe: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
2019-04-22 13:26   ` [PATCH v2 05/79] docs: arm64: convert docs to ReST and rename to .rst Mauro Carvalho Chehab
2019-04-22 13:26   ` [PATCH v2 06/79] docs: cdrom-standard.tex: convert from LaTeX to ReST Mauro Carvalho Chehab
2019-04-22 13:26   ` [PATCH v2 07/79] docs: cdrom: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
2019-04-22 13:26   ` [PATCH v2 08/79] docs: cgroup-v1: " Mauro Carvalho Chehab
2019-05-06 15:47     ` Tejun Heo
2019-04-22 13:26   ` [PATCH v2 09/79] docs: cgroup-v1/blkio-controller.rst: add a note about CFQ scheduler Mauro Carvalho Chehab
2019-04-22 13:26   ` [PATCH v2 10/79] docs: cpu-freq: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
2019-04-23  8:21     ` Rafael J. Wysocki
2019-04-22 13:27   ` [PATCH v2 11/79] docs: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 12/79] docs: fault-injection: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 13/79] docs: fb: " Mauro Carvalho Chehab
2019-05-06 13:40     ` Bartlomiej Zolnierkiewicz
2019-04-22 13:27   ` [PATCH v2 14/79] docs: fpga: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 15/79] docs: gpio: " Mauro Carvalho Chehab
2019-04-23 11:23     ` Linus Walleij
2019-04-23 12:36       ` Mauro Carvalho Chehab
2019-04-23 21:30     ` Linus Walleij
2019-04-22 13:27   ` [PATCH v2 16/79] docs: ide: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 17/79] docs: infiniband: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 19/79] docs: kdump: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 20/79] docs: livepatch: " Mauro Carvalho Chehab
2019-04-26  8:10     ` Petr Mladek
2019-04-26  9:04       ` Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 21/79] docs: locking: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 22/79] docs: mic: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 23/79] docs: netlabel: " Mauro Carvalho Chehab
2019-04-22 18:10     ` Paul Moore
2019-04-22 13:27   ` [PATCH v2 24/79] docs: pcmcia: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 25/79] docs: " Mauro Carvalho Chehab
2019-04-22 13:48     ` Bjorn Helgaas
2019-04-22 14:07       ` Mauro Carvalho Chehab
2019-04-25 18:07     ` Mark Brown
2019-04-26  9:46       ` Mauro Carvalho Chehab
2019-04-27 17:25         ` Mark Brown
2019-04-27 18:13           ` Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 26/79] docs: powerpc: " Mauro Carvalho Chehab
2019-04-24  1:15     ` Andrew Donnellan
2019-04-22 13:27   ` [PATCH v2 27/79] docs: pps.txt: convert to ReST and rename to pps.rst Mauro Carvalho Chehab
2019-04-22 16:19     ` Rodolfo Giometti
2019-04-22 13:27   ` [PATCH v2 28/79] docs: ptp.txt: convert to ReST and move to driver-api Mauro Carvalho Chehab
2019-04-22 15:40     ` Richard Cochran
2019-04-22 13:27   ` [PATCH v2 29/79] docs: riscv: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 30/79] docs: Debugging390.txt: convert table to ascii artwork Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 31/79] docs: s390: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
2019-04-23 16:12     ` Farhan Ali
2019-04-23 19:46       ` Mauro Carvalho Chehab
2019-04-24 11:41     ` Cornelia Huck
2019-04-24 12:30       ` Heiko Carstens
2019-04-24 12:44       ` Mauro Carvalho Chehab
2019-04-24 12:52         ` Cornelia Huck
2019-04-22 13:27   ` [PATCH v2 32/79] s390: include/asm/debug.h add kerneldoc markups Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 33/79] docs: serial: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 34/79] docs: target: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 35/79] docs: timers: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 36/79] docs: watchdog: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 37/79] docs: xilinx: convert eemi.txt to eemi.rst Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 38/79] docs: scheduler: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
2019-04-23  8:29     ` Peter Zijlstra
2019-04-23 10:32       ` Ingo Molnar
2019-04-23 11:19         ` Peter Zijlstra
2019-04-23 12:30           ` Ingo Molnar
2019-04-22 13:27   ` [PATCH v2 39/79] docs: EDID/HOWTO.txt: convert it and rename to howto.rst Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 40/79] convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 41/79] docs: lcd-panel-cgram.txt: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 42/79] docs: lp855x-driver.txt: convert to ReST and move to kernel-api Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 43/79] docs: m68k: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
2019-05-03 11:55     ` Geert Uytterhoeven
2019-04-22 13:27   ` [PATCH v2 44/79] docs: cma/debugfs.txt: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 45/79] docs: console.txt: " Mauro Carvalho Chehab
2019-05-06 13:41     ` Bartlomiej Zolnierkiewicz
2019-04-22 13:27   ` [PATCH v2 46/79] docs: pti_intel_mid.txt: convert it to pti_intel_mid.rst Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 47/79] docs: early-userspace: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 48/79] docs: driver-model: " Mauro Carvalho Chehab
2019-04-22 14:47     ` Julia Lawall
2019-04-22 22:30     ` Guenter Roeck
2019-04-22 13:27   ` [PATCH v2 50/79] docs: memory-devices: convert ti-emif.txt to ReST Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 51/79] docs: xen-tpmfront.txt: convert it to .rst Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 52/79] docs: bus-devices: ti-gpmc.rst: convert it to ReST Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 53/79] docs: nvmem: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 54/79] docs: phy: convert samsung-usb2.txt to ReST format Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 55/79] docs: rbtree.txt: fix Sphinx build warnings Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 57/79] docs: accounting: convert to ReST Mauro Carvalho Chehab
2019-05-06 15:46     ` Tejun Heo
2019-04-22 13:27   ` [PATCH v2 58/79] docs: fmc: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 59/79] docs: hid: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 60/79] docs: ia64: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 61/79] docs: leds: " Mauro Carvalho Chehab
2019-04-23 19:00     ` Jacek Anaszewski
2019-04-22 13:27   ` [PATCH v2 62/79] docs: laptops: " Mauro Carvalho Chehab
2019-05-06  8:59     ` Andy Shevchenko
2019-04-22 13:27   ` [PATCH v2 63/79] docs: iio: " Mauro Carvalho Chehab
2019-04-22 14:25     ` Jonathan Cameron
2019-04-22 13:27   ` [PATCH v2 64/79] docs: ioctl-number.txt: convert it to ReST format Mauro Carvalho Chehab
2019-04-22 14:05     ` Doug Ledford
2019-04-22 14:17       ` Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 65/79] docs: ioctl: convert to ReST Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 66/79] docs: namespaces: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 67/79] docs: nfc: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 68/79] docs: md: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 69/79] docs: mtd: " Mauro Carvalho Chehab
2019-04-22 13:27   ` [PATCH v2 70/79] docs: nvdimm: " Mauro Carvalho Chehab
2019-04-22 13:28   ` [PATCH v2 71/79] docs: xtensa: " Mauro Carvalho Chehab
2019-04-22 13:28   ` [PATCH v2 72/79] docs: mmc: " Mauro Carvalho Chehab
2019-04-22 13:28   ` [PATCH v2 73/79] docs: sparc: " Mauro Carvalho Chehab
2019-04-22 13:28   ` [PATCH v2 74/79] docs: thermal: " Mauro Carvalho Chehab
2019-04-22 13:28   ` [PATCH v2 75/79] docs: rapidio: " Mauro Carvalho Chehab
2019-04-22 13:28   ` [PATCH v2 76/79] docs: blockdev: " Mauro Carvalho Chehab
2019-04-22 13:28   ` [PATCH v2 77/79] docs: perf: " Mauro Carvalho Chehab
2019-04-22 13:28   ` [PATCH v2 78/79] docs: sysctl: " Mauro Carvalho Chehab
2019-04-22 13:28   ` [PATCH v2 79/79] docs: block: " Mauro Carvalho Chehab
2019-04-22 14:51   ` [PATCH v2 00/79] Convert files " Mauro Carvalho Chehab
     [not found]   ` <cda57849a6462ccc72dcd360b30068ab6a1021c4.1555938376.git.mchehab+samsung@kernel.org>
     [not found]     ` <20190423083135.GA11158@hirez.programming.kicks-ass.net>
     [not found]       ` <20190423125519.GA7104@redhat.com>
     [not found]         ` <20190423130132.GT4038@hirez.programming.kicks-ass.net>
2019-04-23 14:52           ` [PATCH v2 56/79] docs: Documentation/*.txt: rename all ReST files to *.rst David Howells
2019-04-23 16:54             ` Jonathan Corbet
2019-04-23 17:12               ` Peter Zijlstra
2019-04-23 20:26               ` Mauro Carvalho Chehab
2019-04-24 11:51                 ` Mike Rapoport
2019-04-24 12:57                   ` Mauro Carvalho Chehab
2019-04-23 19:37             ` Mauro Carvalho Chehab

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).