linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v3 00/30] Update cros_ec_commands.h
@ 2019-05-09 21:13 Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 01/30] mfd: cros_ec: Update license term Gwendal Grignou
                   ` (32 more replies)
  0 siblings, 33 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

The interface between CrosEC embedded controller and the host,
described by cros_ec_commands.h, as diverged from what the embedded
controller really support.

The source of thruth is at
https://chromium.googlesource.com/chromiumos/platform/ec/+/master/include/ec_commands.h

That include file is converted to remove ACPI and Embedded only code.

From now on, cros_ec_commands.h will be automatically generated from
the file above, do not modify directly.

Fell free to squash the commits below.

Changes in v3:
- Rebase after commit 81888d8ab1532 ("mfd: cros_ec: Update the EC feature codes")
- Add Acked-by: Benson Leung <bleung@chromium.org>

Changes in v2:
- Move I2S changes at the end of the patchset, squashed with change in
  sound/soc/codecs/cros_ec_codec.c to match new interface.
- Add Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Gwendal Grignou (30):
  mfd: cros_ec: Update license term
  mfd: cros_ec: Zero BUILD_ macro
  mfd: cros_ec: set comments properly
  mfd: cros_ec: add ec_align macros
  mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values
  mfd: cros_ec: use BIT macro
  mfd: cros_ec: Update ACPI interface definition
  mfd: cros_ec: move HDMI CEC API definition
  mfd: cros_ec: Remove zero-size structs
  mfd: cros_ec: Add Flash V2 commands API
  mfd: cros_ec: Add PWM_SET_DUTY API
  mfd: cros_ec: Add lightbar v2 API
  mfd: cros_ec: Expand hash API
  mfd: cros_ec: Add EC transport protocol v4
  mfd: cros_ec: Complete MEMS sensor API
  mfd: cros_ec: Fix event processing API
  mfd: cros_ec: Add fingerprint API
  mfd: cros_ec: Fix temperature API
  mfd: cros_ec: Complete Power and USB PD API
  mfd: cros_ec: Add API for keyboard testing
  mfd: cros_ec: Add Hibernate API
  mfd: cros_ec: Add Smart Battery Firmware update API
  mfd: cros_ec: Add I2C passthru protection API
  mfd: cros_ec: Add API for EC-EC communication
  mfd: cros_ec: Add API for Touchpad support
  mfd: cros_ec: Add API for Fingerprint support
  mfd: cros_ec: Add API for rwsig
  mfd: cros_ec: Add SKU ID and Secure storage API
  mfd: cros_ec: Add Management API entry points
  mfd: cros_ec: Update I2S API

 include/linux/mfd/cros_ec_commands.h | 3658 ++++++++++++++++++++------
 sound/soc/codecs/cros_ec_codec.c     |    8 +-
 2 files changed, 2915 insertions(+), 751 deletions(-)

-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply	[flat|nested] 38+ messages in thread

* [PATCH v3 01/30] mfd: cros_ec: Update license term
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 02/30] mfd: cros_ec: Zero BUILD_ macro Gwendal Grignou
                   ` (31 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Update to SPDX-License-Identifier, GPL-2.0

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index dcec96f01879..48292d449921 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1,25 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Host communication command constants for ChromeOS EC
  *
  * Copyright (C) 2012 Google, Inc
  *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * The ChromeOS EC multi function device is used to mux all the requests
- * to the EC device for its multiple features: keyboard controller,
- * battery charging and regulator control, firmware update.
- *
- * NOTE: This file is copied verbatim from the ChromeOS EC Open Source
- * project in an attempt to make future updates easy to make.
+ * NOTE: This file is auto-generated from ChromeOS EC Open Source code from
+ * https://chromium.googlesource.com/chromiumos/platform/ec/+/master/include/ec_commands.h
  */
 
+/* Host communication command constants for Chrome EC */
+
 #ifndef __CROS_EC_COMMANDS_H
 #define __CROS_EC_COMMANDS_H
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 02/30] mfd: cros_ec: Zero BUILD_ macro
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 01/30] mfd: cros_ec: Update license term Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 03/30] mfd: cros_ec: set comments properly Gwendal Grignou
                   ` (30 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Defined out build macro used when compiling embedded controller
firmware.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 48292d449921..7b8fac4d0c89 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -13,6 +13,11 @@
 #ifndef __CROS_EC_COMMANDS_H
 #define __CROS_EC_COMMANDS_H
 
+
+
+
+#define BUILD_ASSERT(_cond)
+
 /*
  * Current version of this protocol
  *
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 03/30] mfd: cros_ec: set comments properly
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 01/30] mfd: cros_ec: Update license term Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 02/30] mfd: cros_ec: Zero BUILD_ macro Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 04/30] mfd: cros_ec: add ec_align macros Gwendal Grignou
                   ` (29 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Fix comments syntax and spelling errors.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 65 +++++++++++++++++-----------
 1 file changed, 40 insertions(+), 25 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 7b8fac4d0c89..a7a7060f44f7 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -42,13 +42,16 @@
 /* Protocol version 2 */
 #define EC_LPC_ADDR_HOST_ARGS    0x800  /* And 0x801, 0x802, 0x803 */
 #define EC_LPC_ADDR_HOST_PARAM   0x804  /* For version 2 params; size is
-					 * EC_PROTO2_MAX_PARAM_SIZE */
+					 * EC_PROTO2_MAX_PARAM_SIZE
+					 */
 /* Protocol version 3 */
 #define EC_LPC_ADDR_HOST_PACKET  0x800  /* Offset of version 3 packet */
 #define EC_LPC_HOST_PACKET_SIZE  0x100  /* Max size of version 3 packet */
 
-/* The actual block is 0x800-0x8ff, but some BIOSes think it's 0x880-0x8ff
- * and they tell the kernel that so we have to think of it as two parts. */
+/*
+ * The actual block is 0x800-0x8ff, but some BIOSes think it's 0x880-0x8ff
+ * and they tell the kernel that so we have to think of it as two parts.
+ */
 #define EC_HOST_CMD_REGION0    0x800
 #define EC_HOST_CMD_REGION1    0x880
 #define EC_HOST_CMD_REGION_SIZE 0x80
@@ -324,7 +327,7 @@ struct ec_lpc_host_args {
  * If EC gets a command and this flag is not set, this is an old-style command.
  * Command version is 0 and params from host are at EC_LPC_ADDR_OLD_PARAM with
  * unknown length.  EC must respond with an old-style response (that is,
- * withouth setting EC_HOST_ARGS_FLAG_TO_HOST).
+ * without setting EC_HOST_ARGS_FLAG_TO_HOST).
  */
 #define EC_HOST_ARGS_FLAG_FROM_HOST 0x01
 /*
@@ -511,7 +514,7 @@ struct ec_host_response {
  * Notes on commands:
  *
  * Each command is an 16-bit command value.  Commands which take params or
- * return response data specify structs for that data.  If no struct is
+ * return response data specify structures for that data.  If no structure is
  * specified, the command does not input or output data, respectively.
  * Parameter/response length is implicit in the structs.  Some underlying
  * communication protocols (I2C, SPI) may add length or checksum headers, but
@@ -684,7 +687,7 @@ struct ec_response_get_cmd_versions {
 } __packed;
 
 /*
- * Check EC communcations status (busy). This is needed on i2c/spi but not
+ * Check EC communications status (busy). This is needed on i2c/spi but not
  * on lpc since it has its own out-of-band busy indicator.
  *
  * lpc must read the status from the command register. Attempting this on
@@ -721,7 +724,7 @@ struct ec_response_test_protocol {
 	uint8_t buf[32];
 } __packed;
 
-/* Get prococol information */
+/* Get protocol information */
 #define EC_CMD_GET_PROTOCOL_INFO	0x0b
 
 /* Flags for ec_response_get_protocol_info.flags */
@@ -767,7 +770,7 @@ struct ec_response_get_set_value {
 	uint32_t value;
 } __packed;
 
-/* More than one command can use these structs to get/set paramters. */
+/* More than one command can use these structs to get/set parameters. */
 #define EC_CMD_GSV_PAUSE_IN_S5	0x0c
 
 /*****************************************************************************/
@@ -917,8 +920,10 @@ struct ec_response_flash_info {
 	uint32_t protect_block_size;
 } __packed;
 
-/* Flags for version 1+ flash info command */
-/* EC flash erases bits to 0 instead of 1 */
+/*
+ * Flags for version 1+ flash info command
+ * EC flash erases bits to 0 instead of 1.
+ */
 #define EC_FLASH_INFO_ERASE_TO_0 (1 << 0)
 
 /**
@@ -941,7 +946,8 @@ struct ec_response_flash_info {
  * fields following.
  *
  * gcc anonymous structs don't seem to get along with the __packed directive;
- * if they did we'd define the version 0 struct as a sub-struct of this one.
+ * if they did we'd define the version 0 structure as a sub-structure of this
+ * one.
  */
 struct ec_response_flash_info_1 {
 	/* Version 0 fields; see above for description */
@@ -1036,7 +1042,7 @@ struct ec_params_flash_erase {
  * re-requesting the desired flags, or by a hard reset if that fails.
  */
 #define EC_FLASH_PROTECT_ERROR_INCONSISTENT (1 << 5)
-/* Entile flash code protected when the EC boots */
+/* Entire flash code protected when the EC boots */
 #define EC_FLASH_PROTECT_ALL_AT_BOOT        (1 << 6)
 
 /**
@@ -1629,7 +1635,7 @@ struct ec_response_motion_sensor_data {
 	union {
 		int16_t             data[3];
 		struct {
-			uint16_t    rsvd;
+			uint16_t    reserved;
 			uint32_t    timestamp;
 		} __packed;
 		struct {
@@ -1828,7 +1834,7 @@ struct ec_response_rtc {
 #define EC_CMD_RTC_SET_VALUE 0x46
 #define EC_CMD_RTC_SET_ALARM 0x47
 
-/* Pass as param to SET_ALARM to clear the current alarm */
+/* Pass as time param to SET_ALARM to clear the current alarm */
 #define EC_RTC_ALARM_CLEAR 0
 
 /*****************************************************************************/
@@ -1914,7 +1920,8 @@ enum ec_temp_thresholds {
 	EC_TEMP_THRESH_COUNT
 };
 
-/* Thermal configuration for one temperature sensor. Temps are in degrees K.
+/*
+ * Thermal configuration for one temperature sensor. Temps are in degrees K.
  * Zero values will be silently ignored by the thermal task.
  */
 struct ec_thermal_config {
@@ -1929,8 +1936,10 @@ struct ec_params_thermal_get_threshold_v1 {
 } __packed;
 /* This returns a struct ec_thermal_config */
 
-/* Version 1 - set config for one sensor.
- * Use read-modify-write for best results! */
+/*
+ * Version 1 - set config for one sensor.
+ * Use read-modify-write for best results!
+ */
 struct ec_params_thermal_set_threshold_v1 {
 	uint32_t sensor_num;
 	struct ec_thermal_config cfg;
@@ -2079,7 +2088,12 @@ enum mkbp_config_valid {
 	EC_MKBP_VALID_FIFO_MAX_DEPTH		= 1 << 7,
 };
 
-/* Configuration for our key scanning algorithm */
+/*
+ * Configuration for our key scanning algorithm.
+ *
+ * Note that this is used as a sub-structure of
+ * ec_{params/response}_mkbp_get_config.
+ */
 struct ec_mkbp_config {
 	uint32_t valid_mask;		/* valid fields */
 	uint8_t flags;		/* some flags (enum mkbp_config_flags) */
@@ -2362,6 +2376,7 @@ struct ec_params_gpio_set {
 struct ec_params_gpio_get {
 	char name[32];
 } __packed;
+
 struct ec_response_gpio_get {
 	uint8_t val;
 } __packed;
@@ -2402,8 +2417,10 @@ enum gpio_get_subcmd {
 /* I2C commands. Only available when flash write protect is unlocked. */
 
 /*
- * TODO(crosbug.com/p/23570): These commands are deprecated, and will be
- * removed soon.  Use EC_CMD_I2C_XFER instead.
+ * CAUTION: These commands are deprecated, and are not supported anymore in EC
+ * builds >= 8398.0.0 (see crosbug.com/p/23570).
+ *
+ * Use EC_CMD_I2C_PASSTHRU instead.
  */
 
 /* Read I2C bus */
@@ -2415,6 +2432,7 @@ struct ec_params_i2c_read {
 	uint8_t port;
 	uint8_t offset;
 } __packed;
+
 struct ec_response_i2c_read {
 	uint16_t data;
 } __packed;
@@ -2450,7 +2468,6 @@ struct ec_params_charge_control {
 } __packed;
 
 /*****************************************************************************/
-/* Console commands. Only available when flash write protect is unlocked. */
 
 /* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */
 #define EC_CMD_CONSOLE_SNAPSHOT 0x97
@@ -2904,9 +2921,7 @@ enum ec_i2s_config {
 };
 
 struct ec_param_codec_i2s {
-	/*
-	 * enum ec_codec_i2s_subcmd
-	 */
+	/* enum ec_codec_i2s_subcmd */
 	uint8_t cmd;
 	union {
 		/*
@@ -2981,7 +2996,7 @@ struct ec_response_codec_gain {
 enum ec_reboot_cmd {
 	EC_REBOOT_CANCEL = 0,        /* Cancel a pending reboot */
 	EC_REBOOT_JUMP_RO = 1,       /* Jump to RO without rebooting */
-	EC_REBOOT_JUMP_RW = 2,       /* Jump to RW without rebooting */
+	EC_REBOOT_JUMP_RW = 2,       /* Jump to active RW without rebooting */
 	/* (command 3 was jump to RW-B) */
 	EC_REBOOT_COLD = 4,          /* Cold-reboot */
 	EC_REBOOT_DISABLE_JUMP = 5,  /* Disable jump until next reboot */
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 04/30] mfd: cros_ec: add ec_align macros
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (2 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 03/30] mfd: cros_ec: set comments properly Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 05/30] mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values Gwendal Grignou
                   ` (28 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

To reduce code and improve performance of the embedded controller
firmware, pragma __aligned(2) or __aligned(4) are used when alignment to
16 or 32 bit boundary is expected.

Define all ec_align to packed when compiling kernel.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 442 ++++++++++++++-------------
 1 file changed, 238 insertions(+), 204 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index a7a7060f44f7..c12ae9742e20 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -188,12 +188,46 @@
 #ifndef __ACPI__
 
 /*
- * Define __packed if someone hasn't beat us to it.  Linux kernel style
- * checking prefers __packed over __attribute__((packed)).
+ * Attributes for EC request and response packets.  Just defining __packed
+ * results in inefficient assembly code on ARM, if the structure is actually
+ * 32-bit aligned, as it should be for all buffers.
+ *
+ * Be very careful when adding these to existing structures.  They will round
+ * up the structure size to the specified boundary.
+ *
+ * Also be very careful to make that if a structure is included in some other
+ * parent structure that the alignment will still be true given the packing of
+ * the parent structure.  This is particularly important if the sub-structure
+ * will be passed as a pointer to another function, since that function will
+ * not know about the misaligment caused by the parent structure's packing.
+ *
+ * Also be very careful using __packed - particularly when nesting non-packed
+ * structures inside packed ones.  In fact, DO NOT use __packed directly;
+ * always use one of these attributes.
+ *
+ * Once everything is annotated properly, the following search strings should
+ * not return ANY matches in this file other than right here:
+ *
+ * "__packed" - generates inefficient code; all sub-structs must also be packed
+ *
+ * "struct [^_]" - all structs should be annotated, except for structs that are
+ * members of other structs/unions (and their original declarations should be
+ * annotated).
  */
-#ifndef __packed
-#define __packed __attribute__((packed))
-#endif
+
+/*
+ * Packed structures make no assumption about alignment, so they do inefficient
+ * byte-wise reads.
+ */
+#define __ec_align1 __packed
+#define __ec_align2 __packed
+#define __ec_align4 __packed
+#define __ec_align_size1 __packed
+#define __ec_align_offset1 __packed
+#define __ec_align_offset2 __packed
+#define __ec_todo_packed __packed
+#define __ec_todo_unpacked
+
 
 /* LPC command status byte masks */
 /* EC has written a byte in the data register and host hasn't read it yet */
@@ -317,7 +351,7 @@ struct ec_lpc_host_args {
 	uint8_t command_version;
 	uint8_t data_size;
 	uint8_t checksum;
-} __packed;
+} __ec_align4;
 
 /* Flags for ec_lpc_host_args.flags */
 /*
@@ -488,7 +522,7 @@ struct ec_host_request {
 	uint8_t command_version;
 	uint8_t reserved;
 	uint16_t data_len;
-} __packed;
+} __ec_align4;
 
 #define EC_HOST_RESPONSE_VERSION 3
 
@@ -507,7 +541,7 @@ struct ec_host_response {
 	uint16_t result;
 	uint16_t data_len;
 	uint16_t reserved;
-} __packed;
+} __ec_align4;
 
 /*****************************************************************************/
 /*
@@ -536,7 +570,7 @@ struct ec_host_response {
  */
 struct ec_response_proto_version {
 	uint32_t version;
-} __packed;
+} __ec_align4;
 
 /*
  * Hello.  This is a simple command to test the EC is responsive to
@@ -550,7 +584,7 @@ struct ec_response_proto_version {
  */
 struct ec_params_hello {
 	uint32_t in_data;
-} __packed;
+} __ec_align4;
 
 /**
  * struct ec_response_hello - Response to the hello command.
@@ -558,7 +592,7 @@ struct ec_params_hello {
  */
 struct ec_response_hello {
 	uint32_t out_data;
-} __packed;
+} __ec_align4;
 
 /* Get version number */
 #define EC_CMD_GET_VERSION 0x02
@@ -581,7 +615,7 @@ struct ec_response_get_version {
 	char version_string_rw[32];
 	char reserved[32];
 	uint32_t current_image;
-} __packed;
+} __ec_align4;
 
 /* Read test */
 #define EC_CMD_READ_TEST 0x03
@@ -594,7 +628,7 @@ struct ec_response_get_version {
 struct ec_params_read_test {
 	uint32_t offset;
 	uint32_t size;
-} __packed;
+} __ec_align4;
 
 /**
  * struct ec_response_read_test - Response to the read test command.
@@ -602,7 +636,7 @@ struct ec_params_read_test {
  */
 struct ec_response_read_test {
 	uint32_t data[32];
-} __packed;
+} __ec_align4;
 
 /*
  * Get build information
@@ -624,7 +658,7 @@ struct ec_response_get_chip_info {
 	char vendor[32];
 	char name[32];
 	char revision[32];
-} __packed;
+} __ec_align4;
 
 /* Get board HW version */
 #define EC_CMD_GET_BOARD_VERSION 0x06
@@ -635,7 +669,7 @@ struct ec_response_get_chip_info {
  */
 struct ec_response_board_version {
 	uint16_t board_version;
-} __packed;
+} __ec_align2;
 
 /*
  * Read memory-mapped data.
@@ -655,7 +689,7 @@ struct ec_response_board_version {
 struct ec_params_read_memmap {
 	uint8_t offset;
 	uint8_t size;
-} __packed;
+} __ec_align1;
 
 /* Read versions supported for a command */
 #define EC_CMD_GET_CMD_VERSIONS 0x08
@@ -666,7 +700,7 @@ struct ec_params_read_memmap {
  */
 struct ec_params_get_cmd_versions {
 	uint8_t cmd;
-} __packed;
+} __ec_align1;
 
 /**
  * struct ec_params_get_cmd_versions_v1 - Parameters for the get command
@@ -675,7 +709,7 @@ struct ec_params_get_cmd_versions {
  */
 struct ec_params_get_cmd_versions_v1 {
 	uint16_t cmd;
-} __packed;
+} __ec_align2;
 
 /**
  * struct ec_response_get_cmd_version - Response to the get command versions.
@@ -684,7 +718,7 @@ struct ec_params_get_cmd_versions_v1 {
  */
 struct ec_response_get_cmd_versions {
 	uint32_t version_mask;
-} __packed;
+} __ec_align4;
 
 /*
  * Check EC communications status (busy). This is needed on i2c/spi but not
@@ -707,7 +741,7 @@ enum ec_comms_status {
  */
 struct ec_response_get_comms_status {
 	uint32_t flags;		/* Mask of enum ec_comms_status */
-} __packed;
+} __ec_align4;
 
 /* Fake a variety of responses, purely for testing purposes. */
 #define EC_CMD_TEST_PROTOCOL		0x0a
@@ -717,12 +751,12 @@ struct ec_params_test_protocol {
 	uint32_t ec_result;
 	uint32_t ret_len;
 	uint8_t buf[32];
-} __packed;
+} __ec_align4;
 
 /* Here it comes... */
 struct ec_response_test_protocol {
 	uint8_t buf[32];
-} __packed;
+} __ec_align4;
 
 /* Get protocol information */
 #define EC_CMD_GET_PROTOCOL_INFO	0x0b
@@ -745,7 +779,7 @@ struct ec_response_get_protocol_info {
 	uint16_t max_request_packet_size;
 	uint16_t max_response_packet_size;
 	uint32_t flags;
-} __packed;
+} __ec_align4;
 
 
 /*****************************************************************************/
@@ -763,12 +797,12 @@ struct ec_response_get_protocol_info {
 struct ec_params_get_set_value {
 	uint32_t flags;
 	uint32_t value;
-} __packed;
+} __ec_align4;
 
 struct ec_response_get_set_value {
 	uint32_t flags;
 	uint32_t value;
-} __packed;
+} __ec_align4;
 
 /* More than one command can use these structs to get/set parameters. */
 #define EC_CMD_GSV_PAUSE_IN_S5	0x0c
@@ -893,7 +927,7 @@ enum ec_feature_code {
 
 struct ec_response_get_features {
 	uint32_t flags[2];
-} __packed;
+} __ec_align4;
 
 /*****************************************************************************/
 /* Flash commands */
@@ -918,7 +952,7 @@ struct ec_response_flash_info {
 	uint32_t write_block_size;
 	uint32_t erase_block_size;
 	uint32_t protect_block_size;
-} __packed;
+} __ec_align4;
 
 /*
  * Flags for version 1+ flash info command
@@ -959,7 +993,7 @@ struct ec_response_flash_info_1 {
 	/* Version 1 adds these fields: */
 	uint32_t write_ideal_size;
 	uint32_t flags;
-} __packed;
+} __ec_align4;
 
 /*
  * Read flash
@@ -976,7 +1010,7 @@ struct ec_response_flash_info_1 {
 struct ec_params_flash_read {
 	uint32_t offset;
 	uint32_t size;
-} __packed;
+} __ec_align4;
 
 /* Write flash */
 #define EC_CMD_FLASH_WRITE 0x12
@@ -994,7 +1028,7 @@ struct ec_params_flash_write {
 	uint32_t offset;
 	uint32_t size;
 	/* Followed by data to write */
-} __packed;
+} __ec_align4;
 
 /* Erase flash */
 #define EC_CMD_FLASH_ERASE 0x13
@@ -1007,7 +1041,7 @@ struct ec_params_flash_write {
 struct ec_params_flash_erase {
 	uint32_t offset;
 	uint32_t size;
-} __packed;
+} __ec_align4;
 
 /*
  * Get/set flash protection.
@@ -1053,7 +1087,7 @@ struct ec_params_flash_erase {
 struct ec_params_flash_protect {
 	uint32_t mask;
 	uint32_t flags;
-} __packed;
+} __ec_align4;
 
 /**
  * struct ec_response_flash_protect - Response to the flash protect command.
@@ -1068,7 +1102,7 @@ struct ec_response_flash_protect {
 	uint32_t flags;
 	uint32_t valid_flags;
 	uint32_t writable_flags;
-} __packed;
+} __ec_align4;
 
 /*
  * Note: commands 0x14 - 0x19 version 0 were old commands to get/set flash
@@ -1100,12 +1134,12 @@ enum ec_flash_region {
  */
 struct ec_params_flash_region_info {
 	uint32_t region;
-} __packed;
+} __ec_align4;
 
 struct ec_response_flash_region_info {
 	uint32_t offset;
 	uint32_t size;
-} __packed;
+} __ec_align4;
 
 /* Read/write VbNvContext */
 #define EC_CMD_VBNV_CONTEXT 0x17
@@ -1120,11 +1154,11 @@ enum ec_vbnvcontext_op {
 struct ec_params_vbnvcontext {
 	uint32_t op;
 	uint8_t block[EC_VBNV_BLOCK_SIZE];
-} __packed;
+} __ec_align4;
 
 struct ec_response_vbnvcontext {
 	uint8_t block[EC_VBNV_BLOCK_SIZE];
-} __packed;
+} __ec_align4;
 
 /*****************************************************************************/
 /* PWM commands */
@@ -1134,14 +1168,14 @@ struct ec_response_vbnvcontext {
 
 struct ec_response_pwm_get_fan_rpm {
 	uint32_t rpm;
-} __packed;
+} __ec_align4;
 
 /* Set target fan RPM */
-#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x21
+#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x0021
 
 struct ec_params_pwm_set_fan_target_rpm {
 	uint32_t rpm;
-} __packed;
+} __ec_align_size1;
 
 /* Get keyboard backlight */
 #define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x22
@@ -1149,21 +1183,21 @@ struct ec_params_pwm_set_fan_target_rpm {
 struct ec_response_pwm_get_keyboard_backlight {
 	uint8_t percent;
 	uint8_t enabled;
-} __packed;
+} __ec_align1;
 
 /* Set keyboard backlight */
 #define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x23
 
 struct ec_params_pwm_set_keyboard_backlight {
 	uint8_t percent;
-} __packed;
+} __ec_align1;
 
 /* Set target fan PWM duty cycle */
 #define EC_CMD_PWM_SET_FAN_DUTY 0x24
 
 struct ec_params_pwm_set_fan_duty {
 	uint32_t percent;
-} __packed;
+} __ec_align4;
 
 #define EC_CMD_PWM_SET_DUTY 0x25
 /* 16 bit duty cycle, 0xffff = 100% */
@@ -1183,18 +1217,18 @@ struct ec_params_pwm_set_duty {
 	uint16_t duty;     /* Duty cycle, EC_PWM_MAX_DUTY = 100% */
 	uint8_t pwm_type;  /* ec_pwm_type */
 	uint8_t index;     /* Type-specific index, or 0 if unique */
-} __packed;
+} __ec_align4;
 
 #define EC_CMD_PWM_GET_DUTY 0x26
 
 struct ec_params_pwm_get_duty {
 	uint8_t pwm_type;  /* ec_pwm_type */
 	uint8_t index;     /* Type-specific index, or 0 if unique */
-} __packed;
+} __ec_align1;
 
 struct ec_response_pwm_get_duty {
 	uint16_t duty;     /* Duty cycle, EC_PWM_MAX_DUTY = 100% */
-} __packed;
+} __ec_align2;
 
 /*****************************************************************************/
 /*
@@ -1207,7 +1241,7 @@ struct ec_response_pwm_get_duty {
 
 struct rgb_s {
 	uint8_t r, g, b;
-};
+} __ec_todo_unpacked;
 
 #define LB_BATTERY_LEVELS 4
 
@@ -1247,7 +1281,7 @@ struct lightbar_params_v0 {
 
 	/* Color palette */
 	struct rgb_s color[8];			/* 0-3 are Google colors */
-} __packed;
+} __ec_todo_packed;
 
 struct lightbar_params_v1 {
 	/* Timing */
@@ -1290,14 +1324,14 @@ struct lightbar_params_v1 {
 
 	/* Color palette */
 	struct rgb_s color[8];			/* 0-3 are Google colors */
-} __packed;
+} __ec_todo_packed;
 
 /* Lightbar program */
 #define EC_LB_PROG_LEN 192
 struct lightbar_program {
 	uint8_t size;
 	uint8_t data[EC_LB_PROG_LEN];
-};
+} __ec_todo_unpacked;
 
 struct ec_params_lightbar {
 	uint8_t cmd;		      /* Command (see enum lightbar_command) */
@@ -1307,23 +1341,23 @@ struct ec_params_lightbar {
 		} dump, off, on, init, get_seq, get_params_v0, get_params_v1,
 			version, get_brightness, get_demo, suspend, resume;
 
-		struct {
+		struct __ec_todo_unpacked {
 			uint8_t num;
 		} set_brightness, seq, demo;
 
-		struct {
+		struct __ec_todo_unpacked {
 			uint8_t ctrl, reg, value;
 		} reg;
 
-		struct {
+		struct __ec_todo_unpacked {
 			uint8_t led, red, green, blue;
 		} set_rgb;
 
-		struct {
+		struct __ec_todo_unpacked {
 			uint8_t led;
 		} get_rgb;
 
-		struct {
+		struct __ec_todo_unpacked {
 			uint8_t enable;
 		} manual_suspend_ctrl;
 
@@ -1331,31 +1365,31 @@ struct ec_params_lightbar {
 		struct lightbar_params_v1 set_params_v1;
 		struct lightbar_program set_program;
 	};
-} __packed;
+} __ec_todo_packed;
 
 struct ec_response_lightbar {
 	union {
-		struct {
-			struct {
+		struct __ec_todo_unpacked {
+			struct __ec_todo_unpacked {
 				uint8_t reg;
 				uint8_t ic0;
 				uint8_t ic1;
 			} vals[23];
 		} dump;
 
-		struct  {
+		struct __ec_todo_unpacked {
 			uint8_t num;
 		} get_seq, get_brightness, get_demo;
 
 		struct lightbar_params_v0 get_params_v0;
 		struct lightbar_params_v1 get_params_v1;
 
-		struct {
+		struct __ec_todo_unpacked {
 			uint32_t num;
 			uint32_t flags;
 		} version;
 
-		struct {
+		struct __ec_todo_unpacked {
 			uint8_t red, green, blue;
 		} get_rgb;
 
@@ -1365,7 +1399,7 @@ struct ec_response_lightbar {
 			demo, set_params_v0, set_params_v1,
 			set_program, manual_suspend_ctrl, suspend, resume;
 	};
-} __packed;
+} __ec_todo_packed;
 
 /* Lightbar commands */
 enum lightbar_command {
@@ -1432,7 +1466,7 @@ struct ec_params_led_control {
 	uint8_t flags;      /* Control flags */
 
 	uint8_t brightness[EC_LED_COLOR_COUNT];
-} __packed;
+} __ec_align1;
 
 struct ec_response_led_control {
 	/*
@@ -1443,7 +1477,7 @@ struct ec_response_led_control {
 	 * Other values means the LED is control by PWM.
 	 */
 	uint8_t brightness_range[EC_LED_COLOR_COUNT];
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /* Verified boot commands */
@@ -1464,7 +1498,7 @@ struct ec_params_vboot_hash {
 	uint32_t offset;         /* Offset in flash to hash */
 	uint32_t size;           /* Number of bytes to hash */
 	uint8_t nonce_data[64];  /* Nonce data; ignored if nonce_size=0 */
-} __packed;
+} __ec_align4;
 
 struct ec_response_vboot_hash {
 	uint8_t status;          /* enum ec_vboot_hash_status */
@@ -1474,7 +1508,7 @@ struct ec_response_vboot_hash {
 	uint32_t offset;         /* Offset in flash which was hashed */
 	uint32_t size;           /* Number of bytes hashed */
 	uint8_t hash_digest[64]; /* Hash digest data */
-} __packed;
+} __ec_align4;
 
 enum ec_vboot_hash_cmd {
 	EC_VBOOT_HASH_GET = 0,       /* Get current hash status */
@@ -1634,23 +1668,23 @@ struct ec_response_motion_sensor_data {
 	/* Each sensor is up to 3-axis. */
 	union {
 		int16_t             data[3];
-		struct {
+		struct __ec_todo_packed {
 			uint16_t    reserved;
 			uint32_t    timestamp;
-		} __packed;
-		struct {
+		};
+		struct __ec_todo_unpacked {
 			uint8_t     activity; /* motionsensor_activity */
 			uint8_t     state;
 			int16_t     add_info[2];
 		};
 	};
-} __packed;
+} __ec_todo_packed;
 
 struct ec_params_motion_sense {
 	uint8_t cmd;
 	union {
 		/* Used for MOTIONSENSE_CMD_DUMP. */
-		struct {
+		struct __ec_todo_unpacked {
 			/* no args */
 		} dump;
 
@@ -1658,13 +1692,13 @@ struct ec_params_motion_sense {
 		 * Used for MOTIONSENSE_CMD_EC_RATE and
 		 * MOTIONSENSE_CMD_KB_WAKE_ANGLE.
 		 */
-		struct {
+		struct __ec_todo_unpacked {
 			/* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */
 			int16_t data;
 		} ec_rate, kb_wake_angle;
 
 		/* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */
-		struct {
+		struct __ec_todo_packed {
 			uint8_t sensor_num;
 
 			/*
@@ -1690,10 +1724,10 @@ struct ec_params_motion_sense {
 			 * Compass:       1/16 uT
 			 */
 			int16_t offset[3];
-		} __packed sensor_offset;
+		} sensor_offset;
 
 		/* Used for MOTIONSENSE_CMD_INFO. */
-		struct {
+		struct __ec_todo_packed {
 			uint8_t sensor_num;
 		} info;
 
@@ -1714,12 +1748,12 @@ struct ec_params_motion_sense {
 			int32_t data;
 		} sensor_odr, sensor_range;
 	};
-} __packed;
+} __ec_todo_packed;
 
 struct ec_response_motion_sense {
 	union {
 		/* Used for MOTIONSENSE_CMD_DUMP. */
-		struct {
+		struct __ec_todo_unpacked {
 			/* Flags representing the motion sensor module. */
 			uint8_t module_flags;
 
@@ -1734,7 +1768,7 @@ struct ec_response_motion_sense {
 		} dump;
 
 		/* Used for MOTIONSENSE_CMD_INFO. */
-		struct {
+		struct __ec_todo_unpacked {
 			/* Should be element of enum motionsensor_type. */
 			uint8_t type;
 
@@ -1753,18 +1787,18 @@ struct ec_response_motion_sense {
 		 * MOTIONSENSE_CMD_SENSOR_RANGE, and
 		 * MOTIONSENSE_CMD_KB_WAKE_ANGLE.
 		 */
-		struct {
+		struct __ec_todo_unpacked {
 			/* Current value of the parameter queried. */
 			int32_t ret;
 		} ec_rate, sensor_odr, sensor_range, kb_wake_angle;
 
 		/* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */
-		struct {
+		struct __ec_todo_unpacked  {
 			int16_t temp;
 			int16_t offset[3];
 		} sensor_offset, perform_calib;
 	};
-} __packed;
+} __ec_todo_packed;
 
 /*****************************************************************************/
 /* USB charging control commands */
@@ -1775,7 +1809,7 @@ struct ec_response_motion_sense {
 struct ec_params_usb_charge_set_mode {
 	uint8_t usb_port_id;
 	uint8_t mode;
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /* Persistent storage for host */
@@ -1791,7 +1825,7 @@ struct ec_response_pstore_info {
 	uint32_t pstore_size;
 	/* Access size; read/write offset and size must be a multiple of this */
 	uint32_t access_size;
-} __packed;
+} __ec_align4;
 
 /*
  * Read persistent storage
@@ -1803,7 +1837,7 @@ struct ec_response_pstore_info {
 struct ec_params_pstore_read {
 	uint32_t offset;   /* Byte offset to read */
 	uint32_t size;     /* Size to read in bytes */
-} __packed;
+} __ec_align4;
 
 /* Write persistent storage */
 #define EC_CMD_PSTORE_WRITE 0x42
@@ -1812,7 +1846,7 @@ struct ec_params_pstore_write {
 	uint32_t offset;   /* Byte offset to write */
 	uint32_t size;     /* Size to write in bytes */
 	uint8_t data[EC_PSTORE_SIZE_MAX];
-} __packed;
+} __ec_align4;
 
 /*****************************************************************************/
 /* Real-time clock */
@@ -1820,11 +1854,11 @@ struct ec_params_pstore_write {
 /* RTC params and response structures */
 struct ec_params_rtc {
 	uint32_t time;
-} __packed;
+} __ec_align4;
 
 struct ec_response_rtc {
 	uint32_t time;
-} __packed;
+} __ec_align4;
 
 /* These use ec_response_rtc */
 #define EC_CMD_RTC_GET_VALUE 0x44
@@ -1855,29 +1889,29 @@ enum ec_port80_subcmd {
 struct ec_params_port80_read {
 	uint16_t subcmd;
 	union {
-		struct {
+		struct __ec_todo_unpacked {
 			uint32_t offset;
 			uint32_t num_entries;
 		} read_buffer;
 	};
-} __packed;
+} __ec_todo_packed;
 
 struct ec_response_port80_read {
 	union {
-		struct {
+		struct __ec_todo_unpacked {
 			uint32_t writes;
 			uint32_t history_size;
 			uint32_t last_boot;
 		} get_info;
-		struct {
+		struct __ec_todo_unpacked {
 			uint16_t codes[EC_PORT80_SIZE_MAX];
 		} data;
 	};
-} __packed;
+} __ec_todo_packed;
 
 struct ec_response_port80_last_boot {
 	uint16_t code;
-} __packed;
+} __ec_align2;
 
 /*****************************************************************************/
 /* Thermal engine commands. Note that there are two implementations. We'll
@@ -1898,17 +1932,17 @@ struct ec_params_thermal_set_threshold {
 	uint8_t sensor_type;
 	uint8_t threshold_id;
 	uint16_t value;
-} __packed;
+} __ec_align2;
 
 /* Version 0 - get */
 struct ec_params_thermal_get_threshold {
 	uint8_t sensor_type;
 	uint8_t threshold_id;
-} __packed;
+} __ec_align1;
 
 struct ec_response_thermal_get_threshold {
 	uint16_t value;
-} __packed;
+} __ec_align2;
 
 
 /* The version 1 structs are visible. */
@@ -1928,12 +1962,12 @@ struct ec_thermal_config {
 	uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */
 	uint32_t temp_fan_off;		/* no active cooling needed */
 	uint32_t temp_fan_max;		/* max active cooling needed */
-} __packed;
+} __ec_align4;
 
 /* Version 1 - get config for one sensor. */
 struct ec_params_thermal_get_threshold_v1 {
 	uint32_t sensor_num;
-} __packed;
+} __ec_align4;
 /* This returns a struct ec_thermal_config */
 
 /*
@@ -1943,7 +1977,7 @@ struct ec_params_thermal_get_threshold_v1 {
 struct ec_params_thermal_set_threshold_v1 {
 	uint32_t sensor_num;
 	struct ec_thermal_config cfg;
-} __packed;
+} __ec_align4;
 /* This returns no data */
 
 /****************************************************************************/
@@ -1956,14 +1990,14 @@ struct ec_params_thermal_set_threshold_v1 {
 
 struct ec_params_tmp006_get_calibration {
 	uint8_t index;
-} __packed;
+} __ec_align1;
 
 struct ec_response_tmp006_get_calibration {
 	float s0;
 	float b0;
 	float b1;
 	float b2;
-} __packed;
+} __ec_align4;
 
 /* Set TMP006 calibration data */
 #define EC_CMD_TMP006_SET_CALIBRATION 0x54
@@ -1975,19 +2009,19 @@ struct ec_params_tmp006_set_calibration {
 	float b0;
 	float b1;
 	float b2;
-} __packed;
+} __ec_align4;
 
 /* Read raw TMP006 data */
 #define EC_CMD_TMP006_GET_RAW 0x55
 
 struct ec_params_tmp006_get_raw {
 	uint8_t index;
-} __packed;
+} __ec_align1;
 
 struct ec_response_tmp006_get_raw {
 	int32_t t;  /* In 1/100 K */
 	int32_t v;  /* In nV */
-};
+} __ec_align4;
 
 /*****************************************************************************/
 /* MKBP - Matrix KeyBoard Protocol */
@@ -2014,12 +2048,12 @@ struct ec_response_mkbp_info {
 	uint32_t cols;
 	/* Formerly "switches", which was 0. */
 	uint8_t reserved;
-} __packed;
+} __ec_align_size1;
 
 struct ec_params_mkbp_info {
 	uint8_t info_type;
 	uint8_t event_type;
-} __packed;
+} __ec_align1;
 
 enum ec_mkbp_info_type {
 	/*
@@ -2067,7 +2101,7 @@ struct ec_params_mkbp_simulate_key {
 	uint8_t col;
 	uint8_t row;
 	uint8_t pressed;
-} __packed;
+} __ec_align1;
 
 /* Configure keyboard scanning */
 #define EC_CMD_MKBP_SET_CONFIG 0x64
@@ -2113,15 +2147,15 @@ struct ec_mkbp_config {
 	uint16_t debounce_up_us;	/* time for debounce on key up */
 	/* maximum depth to allow for fifo (0 = no keyscan output) */
 	uint8_t fifo_max_depth;
-} __packed;
+} __ec_align_size1;
 
 struct ec_params_mkbp_set_config {
 	struct ec_mkbp_config config;
-} __packed;
+} __ec_align_size1;
 
 struct ec_response_mkbp_get_config {
 	struct ec_mkbp_config config;
-} __packed;
+} __ec_align_size1;
 
 /* Run the key scan emulation */
 #define EC_CMD_KEYSCAN_SEQ_CTRL 0x66
@@ -2144,18 +2178,18 @@ enum ec_collect_flags {
 
 struct ec_collect_item {
 	uint8_t flags;		/* some flags (enum ec_collect_flags) */
-};
+} __ec_align1;
 
 struct ec_params_keyscan_seq_ctrl {
 	uint8_t cmd;	/* Command to send (enum ec_keyscan_seq_cmd) */
 	union {
-		struct {
+		struct __ec_align1 {
 			uint8_t active;		/* still active */
 			uint8_t num_items;	/* number of items */
 			/* Current item being presented */
 			uint8_t cur_item;
 		} status;
-		struct {
+		struct __ec_todo_unpacked {
 			/*
 			 * Absolute time for this scan, measured from the
 			 * start of the sequence.
@@ -2163,22 +2197,22 @@ struct ec_params_keyscan_seq_ctrl {
 			uint32_t time_us;
 			uint8_t scan[0];	/* keyscan data */
 		} add;
-		struct {
+		struct __ec_align1 {
 			uint8_t start_item;	/* First item to return */
 			uint8_t num_items;	/* Number of items to return */
 		} collect;
 	};
-} __packed;
+} __ec_todo_packed;
 
 struct ec_result_keyscan_seq_ctrl {
 	union {
-		struct {
+		struct __ec_todo_unpacked {
 			uint8_t num_items;	/* Number of items */
 			/* Data for each item */
 			struct ec_collect_item item[0];
 		} collect;
 	};
-} __packed;
+} __ec_todo_packed;
 
 /*
  * Command for retrieving the next pending MKBP event from the EC device
@@ -2216,8 +2250,8 @@ enum ec_mkbp_event {
 	EC_MKBP_EVENT_COUNT,
 };
 
-union ec_response_get_next_data {
-	uint8_t   key_matrix[13];
+union __ec_align_offset1 ec_response_get_next_data {
+	uint8_t key_matrix[13];
 
 	/* Unaligned */
 	uint32_t  host_event;
@@ -2225,9 +2259,9 @@ union ec_response_get_next_data {
 	uint32_t   buttons;
 	uint32_t   switches;
 	uint32_t   sysrq;
-} __packed;
+};
 
-union ec_response_get_next_data_v1 {
+union __ec_align_offset1 ec_response_get_next_data_v1 {
 	uint8_t key_matrix[16];
 	uint32_t host_event;
 	uint32_t buttons;
@@ -2235,19 +2269,19 @@ union ec_response_get_next_data_v1 {
 	uint32_t sysrq;
 	uint32_t cec_events;
 	uint8_t cec_message[16];
-} __packed;
+};
 
 struct ec_response_get_next_event {
 	uint8_t event_type;
 	/* Followed by event data if any */
 	union ec_response_get_next_data data;
-} __packed;
+} __ec_align1;
 
 struct ec_response_get_next_event_v1 {
 	uint8_t event_type;
 	/* Followed by event data if any */
 	union ec_response_get_next_data_v1 data;
-} __packed;
+} __ec_align1;
 
 /* Bit indices for buttons and switches.*/
 /* Buttons */
@@ -2268,12 +2302,12 @@ struct ec_response_get_next_event_v1 {
 
 struct ec_params_temp_sensor_get_info {
 	uint8_t id;
-} __packed;
+} __ec_align1;
 
 struct ec_response_temp_sensor_get_info {
 	char sensor_name[32];
 	uint8_t sensor_type;
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 
@@ -2292,11 +2326,11 @@ struct ec_response_temp_sensor_get_info {
  */
 struct ec_params_host_event_mask {
 	uint32_t mask;
-} __packed;
+} __ec_align4;
 
 struct ec_response_host_event_mask {
 	uint32_t mask;
-} __packed;
+} __ec_align4;
 
 /* These all use ec_response_host_event_mask */
 #define EC_CMD_HOST_EVENT_GET_B         0x87
@@ -2319,7 +2353,7 @@ struct ec_response_host_event_mask {
 
 struct ec_params_switch_enable_backlight {
 	uint8_t enabled;
-} __packed;
+} __ec_align1;
 
 /* Enable/disable WLAN/Bluetooth */
 #define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91
@@ -2328,7 +2362,7 @@ struct ec_params_switch_enable_backlight {
 /* Version 0 params; no response */
 struct ec_params_switch_enable_wireless_v0 {
 	uint8_t enabled;
-} __packed;
+} __ec_align1;
 
 /* Version 1 params */
 struct ec_params_switch_enable_wireless_v1 {
@@ -2347,7 +2381,7 @@ struct ec_params_switch_enable_wireless_v1 {
 
 	/* Which flags to copy from suspend_flags */
 	uint8_t suspend_mask;
-} __packed;
+} __ec_align1;
 
 /* Version 1 response */
 struct ec_response_switch_enable_wireless_v1 {
@@ -2356,7 +2390,7 @@ struct ec_response_switch_enable_wireless_v1 {
 
 	/* Flags to leave enabled in S3 */
 	uint8_t suspend_flags;
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /* GPIO commands. Only available on EC if write protect has been disabled. */
@@ -2367,7 +2401,7 @@ struct ec_response_switch_enable_wireless_v1 {
 struct ec_params_gpio_set {
 	char name[32];
 	uint8_t val;
-} __packed;
+} __ec_align1;
 
 /* Get GPIO value */
 #define EC_CMD_GPIO_GET 0x93
@@ -2375,37 +2409,37 @@ struct ec_params_gpio_set {
 /* Version 0 of input params and response */
 struct ec_params_gpio_get {
 	char name[32];
-} __packed;
+} __ec_align1;
 
 struct ec_response_gpio_get {
 	uint8_t val;
-} __packed;
+} __ec_align1;
 
 /* Version 1 of input params and response */
 struct ec_params_gpio_get_v1 {
 	uint8_t subcmd;
 	union {
-		struct {
+		struct __ec_align1 {
 			char name[32];
 		} get_value_by_name;
-		struct {
+		struct __ec_align1 {
 			uint8_t index;
 		} get_info;
 	};
-} __packed;
+} __ec_align1;
 
 struct ec_response_gpio_get_v1 {
 	union {
-		struct {
+		struct __ec_align1 {
 			uint8_t val;
 		} get_value_by_name, get_count;
-		struct {
+		struct __ec_todo_unpacked {
 			uint8_t val;
 			char name[32];
 			uint32_t flags;
 		} get_info;
 	};
-} __packed;
+} __ec_todo_packed;
 
 enum gpio_get_subcmd {
 	EC_GPIO_GET_BY_NAME = 0,
@@ -2431,11 +2465,11 @@ struct ec_params_i2c_read {
 	uint8_t read_size; /* Either 8 or 16. */
 	uint8_t port;
 	uint8_t offset;
-} __packed;
+} __ec_align_size1;
 
 struct ec_response_i2c_read {
 	uint16_t data;
-} __packed;
+} __ec_align2;
 
 /* Write I2C bus */
 #define EC_CMD_I2C_WRITE 0x95
@@ -2446,7 +2480,7 @@ struct ec_params_i2c_write {
 	uint8_t write_size; /* Either 8 or 16. */
 	uint8_t port;
 	uint8_t offset;
-} __packed;
+} __ec_align_size1;
 
 /*****************************************************************************/
 /* Charge state commands. Only available when flash write protect unlocked. */
@@ -2465,7 +2499,7 @@ enum ec_charge_control_mode {
 
 struct ec_params_charge_control {
 	uint32_t mode;  /* enum charge_control_mode */
-} __packed;
+} __ec_align4;
 
 /*****************************************************************************/
 
@@ -2493,7 +2527,7 @@ enum ec_console_read_subcmd {
 
 struct ec_params_console_read_v1 {
 	uint8_t subcmd; /* enum ec_console_read_subcmd */
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 
@@ -2511,7 +2545,7 @@ struct ec_params_console_read_v1 {
 
 struct ec_params_battery_cutoff {
 	uint8_t flags;
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /* USB port mux control. */
@@ -2523,7 +2557,7 @@ struct ec_params_battery_cutoff {
 
 struct ec_params_usb_mux {
 	uint8_t mux;
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /* LDOs / FETs control. */
@@ -2541,7 +2575,7 @@ enum ec_ldo_state {
 struct ec_params_ldo_set {
 	uint8_t index;
 	uint8_t state;
-} __packed;
+} __ec_align1;
 
 /*
  * Get LDO state.
@@ -2550,11 +2584,11 @@ struct ec_params_ldo_set {
 
 struct ec_params_ldo_get {
 	uint8_t index;
-} __packed;
+} __ec_align1;
 
 struct ec_response_ldo_get {
 	uint8_t state;
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /* Power info. */
@@ -2570,7 +2604,7 @@ struct ec_response_power_info {
 	uint16_t voltage_system;
 	uint16_t current_system;
 	uint16_t usb_current_limit;
-} __packed;
+} __ec_align4;
 
 /*****************************************************************************/
 /* I2C passthru command */
@@ -2592,20 +2626,20 @@ struct ec_response_power_info {
 struct ec_params_i2c_passthru_msg {
 	uint16_t addr_flags;	/* I2C slave address (7 or 10 bits) and flags */
 	uint16_t len;		/* Number of bytes to read or write */
-} __packed;
+} __ec_align2;
 
 struct ec_params_i2c_passthru {
 	uint8_t port;		/* I2C port number */
 	uint8_t num_msgs;	/* Number of messages */
 	struct ec_params_i2c_passthru_msg msg[];
 	/* Data to write for all messages is concatenated here */
-} __packed;
+} __ec_align2;
 
 struct ec_response_i2c_passthru {
 	uint8_t i2c_status;	/* Status flags (EC_I2C_STATUS_...) */
 	uint8_t num_msgs;	/* Number of messages processed */
 	uint8_t data[];		/* Data read by messages concatenated here */
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /* Power button hang detect */
@@ -2660,7 +2694,7 @@ struct ec_params_hang_detect {
 
 	/* Timeout in msec before generating warm reboot, if enabled */
 	uint16_t warm_reboot_timeout_msec;
-} __packed;
+} __ec_align4;
 
 /*****************************************************************************/
 /* Commands for battery charging */
@@ -2706,20 +2740,20 @@ struct ec_params_charge_state {
 			/* no args */
 		} get_state;
 
-		struct {
+		struct __ec_todo_unpacked {
 			uint32_t param;		/* enum charge_state_param */
 		} get_param;
 
-		struct {
+		struct __ec_todo_unpacked {
 			uint32_t param;		/* param to set */
 			uint32_t value;		/* value to set */
 		} set_param;
 	};
-} __packed;
+} __ec_todo_packed;
 
 struct ec_response_charge_state {
 	union {
-		struct {
+		struct __ec_align4 {
 			int ac;
 			int chg_voltage;
 			int chg_current;
@@ -2727,14 +2761,14 @@ struct ec_response_charge_state {
 			int batt_state_of_charge;
 		} get_state;
 
-		struct {
+		struct __ec_align4 {
 			uint32_t value;
 		} get_param;
 		struct {
 			/* no return values */
 		} set_param;
 	};
-} __packed;
+} __ec_align4;
 
 
 /*
@@ -2744,7 +2778,7 @@ struct ec_response_charge_state {
 
 struct ec_params_current_limit {
 	uint32_t limit; /* in mA */
-} __packed;
+} __ec_align4;
 
 /*
  * Set maximum external voltage / current.
@@ -2755,7 +2789,7 @@ struct ec_params_current_limit {
 struct ec_params_external_power_limit_v1 {
 	uint16_t current_lim; /* in mA, or EC_POWER_LIMIT_NONE to clear limit */
 	uint16_t voltage_lim; /* in mV, or EC_POWER_LIMIT_NONE to clear limit */
-} __packed;
+} __ec_align2;
 
 #define EC_POWER_LIMIT_NONE 0xffff
 
@@ -2771,7 +2805,7 @@ enum host_sleep_event {
 
 struct ec_params_host_sleep_event {
 	uint8_t sleep_event;
-} __packed;
+} __ec_align1;
 
 /*
  * Use a default timeout value (CONFIG_SLEEP_TIMEOUT_MS) for detecting sleep
@@ -2802,7 +2836,7 @@ struct ec_params_host_sleep_event_v1 {
 
 		/* No parameters for non-suspend messages. */
 	};
-} __packed;
+} __ec_align2;
 
 /* A timeout occurred when this bit is set */
 #define EC_HOST_RESUME_SLEEP_TIMEOUT 0x80000000
@@ -2828,7 +2862,7 @@ struct ec_response_host_sleep_event_v1 {
 
 		/* No response fields for non-resume messages. */
 	};
-} __packed;
+} __ec_align4;
 
 /*****************************************************************************/
 /* Smart battery pass-through */
@@ -2845,25 +2879,25 @@ struct ec_response_host_sleep_event_v1 {
 
 struct ec_params_sb_rd {
 	uint8_t reg;
-} __packed;
+} __ec_align1;
 
 struct ec_response_sb_rd_word {
 	uint16_t value;
-} __packed;
+} __ec_align2;
 
 struct ec_params_sb_wr_word {
 	uint8_t reg;
 	uint16_t value;
-} __packed;
+} __ec_align1;
 
 struct ec_response_sb_rd_block {
 	uint8_t data[32];
-} __packed;
+} __ec_align1;
 
 struct ec_params_sb_wr_block {
 	uint8_t reg;
 	uint16_t data[32];
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /* Battery vendor parameters
@@ -2885,11 +2919,11 @@ struct ec_params_battery_vendor_param {
 	uint32_t param;
 	uint32_t value;
 	uint8_t mode;
-} __packed;
+} __ec_align_size1;
 
 struct ec_response_battery_vendor_param {
 	uint32_t value;
-} __packed;
+} __ec_align4;
 
 /*****************************************************************************/
 /* Commands for I2S recording on audio codec. */
@@ -2920,7 +2954,7 @@ enum ec_i2s_config {
 	EC_DAI_FMT_PCM_TDM = 5,
 };
 
-struct ec_param_codec_i2s {
+struct __ec_todo_packed ec_param_codec_i2s {
 	/* enum ec_codec_i2s_subcmd */
 	uint8_t cmd;
 	union {
@@ -2934,10 +2968,10 @@ struct ec_param_codec_i2s {
 		 * EC_CODEC_SET_GAIN
 		 * Value should be 0~43 for both channels.
 		 */
-		struct ec_param_codec_i2s_set_gain {
+		struct __ec_align1 ec_param_codec_i2s_set_gain {
 			uint8_t left;
 			uint8_t right;
-		} __packed gain;
+		} gain;
 
 		/*
 		 * EC_CODEC_I2S_ENABLE
@@ -2955,7 +2989,7 @@ struct ec_param_codec_i2s {
 		 * EC_CODEC_I2S_SET_TDM_CONFIG
 		 * Value should be one of ec_i2s_config.
 		 */
-		struct ec_param_codec_i2s_tdm {
+		struct __ec_todo_unpacked ec_param_codec_i2s_tdm {
 			/*
 			 * 0 to 496
 			 */
@@ -2966,14 +3000,14 @@ struct ec_param_codec_i2s {
 			int16_t ch1_delay;
 			uint8_t adjacent_to_ch0;
 			uint8_t adjacent_to_ch1;
-		} __packed tdm_param;
+		} tdm_param;
 
 		/*
 		 * EC_CODEC_I2S_SET_BCLK
 		 */
 		uint32_t bclk;
 	};
-} __packed;
+};
 
 /*
  * For subcommand EC_CODEC_GET_GAIN.
@@ -2981,7 +3015,7 @@ struct ec_param_codec_i2s {
 struct ec_response_codec_gain {
 	uint8_t left;
 	uint8_t right;
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /* System commands */
@@ -3010,7 +3044,7 @@ enum ec_reboot_cmd {
 struct ec_params_reboot_ec {
 	uint8_t cmd;           /* enum ec_reboot_cmd */
 	uint8_t flags;         /* See EC_REBOOT_FLAG_* */
-} __packed;
+} __ec_align1;
 
 /*
  * Get information on last EC panic.
@@ -3153,7 +3187,7 @@ struct ec_params_reboot_ec {
  */
 struct ec_params_cec_write {
 	uint8_t msg[EC_MAX_CEC_MSG_LEN];
-} __packed;
+} __ec_align1;
 
 /* Set various CEC parameters */
 #define EC_CMD_CEC_SET 0x00BA
@@ -3169,7 +3203,7 @@ struct ec_params_cec_write {
 struct ec_params_cec_set {
 	uint8_t cmd; /* enum cec_command */
 	uint8_t val;
-} __packed;
+} __ec_align1;
 
 /* Read various CEC parameters */
 #define EC_CMD_CEC_GET 0x00BB
@@ -3180,7 +3214,7 @@ struct ec_params_cec_set {
  */
 struct ec_params_cec_get {
 	uint8_t cmd; /* enum cec_command */
-} __packed;
+} __ec_align1;
 
 /**
  * struct ec_response_cec_get - CEC parameters get response
@@ -3191,7 +3225,7 @@ struct ec_params_cec_get {
  */
 struct ec_response_cec_get {
 	uint8_t val;
-} __packed;
+} __ec_align1;
 
 /* CEC parameters command */
 enum ec_cec_command {
@@ -3264,13 +3298,13 @@ enum mkbp_cec_event {
 /* Status of EC being sent to PD */
 struct ec_params_pd_status {
 	int8_t batt_soc; /* battery state of charge */
-} __packed;
+} __ec_align1;
 
 /* Status of PD being sent back to EC */
 struct ec_response_pd_status {
 	int8_t status;        /* PD MCU status */
 	uint32_t curr_lim_ma; /* input current limit */
-} __packed;
+} __ec_align_size1;
 
 /* Set USB type-C port role and muxes */
 #define EC_CMD_USB_PD_CONTROL 0x101
@@ -3305,7 +3339,7 @@ struct ec_params_usb_pd_control {
 	uint8_t role;
 	uint8_t mux;
 	uint8_t swap;
-} __packed;
+} __ec_align1;
 
 #define PD_CTRL_RESP_ENABLED_COMMS      (1 << 0) /* Communication enabled */
 #define PD_CTRL_RESP_ENABLED_CONNECTED  (1 << 1) /* Device connected */
@@ -3324,7 +3358,7 @@ struct ec_response_usb_pd_control_v1 {
 	uint8_t role;
 	uint8_t polarity;
 	char state[32];
-} __packed;
+} __ec_align1;
 
 #define EC_CMD_USB_PD_PORTS 0x102
 
@@ -3333,14 +3367,14 @@ struct ec_response_usb_pd_control_v1 {
 
 struct ec_response_usb_pd_ports {
 	uint8_t num_ports;
-} __packed;
+} __ec_align1;
 
 #define EC_CMD_USB_PD_POWER_INFO 0x103
 
 #define PD_POWER_CHARGING_PORT 0xff
 struct ec_params_usb_pd_power_info {
 	uint8_t port;
-} __packed;
+} __ec_align1;
 
 enum usb_chg_type {
 	USB_CHG_TYPE_NONE,
@@ -3366,7 +3400,7 @@ struct usb_chg_measures {
 	uint16_t voltage_now;
 	uint16_t current_max;
 	uint16_t current_lim;
-} __packed;
+} __ec_align2;
 
 struct ec_response_usb_pd_power_info {
 	uint8_t role;
@@ -3375,11 +3409,11 @@ struct ec_response_usb_pd_power_info {
 	uint8_t reserved1;
 	struct usb_chg_measures meas;
 	uint32_t max_power;
-} __packed;
+} __ec_align4;
 
 struct ec_params_usb_pd_info_request {
 	uint8_t port;
-} __packed;
+} __ec_align1;
 
 /*
  * This command will return the number of USB PD charge port + the number
@@ -3389,7 +3423,7 @@ struct ec_params_usb_pd_info_request {
 #define EC_CMD_CHARGE_PORT_COUNT 0x0105
 struct ec_response_charge_port_count {
 	uint8_t port_count;
-} __packed;
+} __ec_align1;
 
 /* Read USB-PD Device discovery info */
 #define EC_CMD_USB_PD_DISCOVERY 0x0113
@@ -3397,7 +3431,7 @@ struct ec_params_usb_pd_discovery_entry {
 	uint16_t vid;  /* USB-IF VID */
 	uint16_t pid;  /* USB-IF PID */
 	uint8_t ptype; /* product type (hub,periph,cable,ama) */
-} __packed;
+} __ec_align_size1;
 
 /* Override default charge behavior */
 #define EC_CMD_PD_CHARGE_PORT_OVERRIDE 0x0114
@@ -3411,7 +3445,7 @@ enum usb_pd_override_ports {
 
 struct ec_params_charge_port_override {
 	int16_t override_port; /* Override port# */
-} __packed;
+} __ec_align2;
 
 /* Read (and delete) one entry of PD event log */
 #define EC_CMD_PD_GET_LOG_ENTRY 0x0115
@@ -3422,7 +3456,7 @@ struct ec_response_pd_log {
 	uint8_t size_port;  /* [7:5] port number [4:0] payload size in bytes */
 	uint16_t data;      /* type-defined data payload */
 	uint8_t payload[0]; /* optional additional data payload: 0..16 bytes */
-} __packed;
+} __ec_align4;
 
 /* The timestamp is the microsecond counter shifted to get about a ms. */
 #define PD_LOG_TIMESTAMP_SHIFT 10 /* 1 LSB = 1024us */
@@ -3488,14 +3522,14 @@ struct mcdp_version {
 	uint8_t major;
 	uint8_t minor;
 	uint16_t build;
-} __packed;
+} __ec_align4;
 
 struct mcdp_info {
 	uint8_t family[2];
 	uint8_t chipid[2];
 	struct mcdp_version irom;
 	struct mcdp_version fw;
-} __packed;
+} __ec_align4;
 
 /* struct mcdp_info field decoding */
 #define MCDP_CHIPID(chipid) ((chipid[0] << 8) | chipid[1])
@@ -3506,7 +3540,7 @@ struct mcdp_info {
 
 struct ec_params_usb_pd_mux_info {
 	uint8_t port; /* USB-C port number */
-} __packed;
+} __ec_align1;
 
 /* Flags representing mux state */
 #define USB_PD_MUX_USB_ENABLED       (1 << 0)
@@ -3516,7 +3550,7 @@ struct ec_params_usb_pd_mux_info {
 
 struct ec_response_usb_pd_mux_info {
 	uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */
-} __packed;
+} __ec_align1;
 
 /*****************************************************************************/
 /*
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 05/30] mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (3 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 04/30] mfd: cros_ec: add ec_align macros Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 06/30] mfd: cros_ec: use BIT macro Gwendal Grignou
                   ` (27 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

This change is required for compilation of embedded controller firmware
to work properly (See CONFIG_HOSTCMD_SECTION_SORTED).

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 235 ++++++++++++++++-----------
 1 file changed, 136 insertions(+), 99 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index c12ae9742e20..8ad77d8a9141 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -553,6 +553,9 @@ struct ec_host_response {
  * Parameter/response length is implicit in the structs.  Some underlying
  * communication protocols (I2C, SPI) may add length or checksum headers, but
  * those are implementation-dependent and not defined here.
+ *
+ * All commands MUST be #defined to be 4-digit UPPER CASE hex values
+ * (e.g., 0x00AB, not 0xab) for CONFIG_HOSTCMD_SECTION_SORTED to work.
  */
 
 /*****************************************************************************/
@@ -562,7 +565,7 @@ struct ec_host_response {
  * Get protocol version, used to deal with non-backward compatible protocol
  * changes.
  */
-#define EC_CMD_PROTO_VERSION 0x00
+#define EC_CMD_PROTO_VERSION 0x0000
 
 /**
  * struct ec_response_proto_version - Response to the proto version command.
@@ -576,7 +579,7 @@ struct ec_response_proto_version {
  * Hello.  This is a simple command to test the EC is responsive to
  * commands.
  */
-#define EC_CMD_HELLO 0x01
+#define EC_CMD_HELLO 0x0001
 
 /**
  * struct ec_params_hello - Parameters to the hello command.
@@ -595,7 +598,7 @@ struct ec_response_hello {
 } __ec_align4;
 
 /* Get version number */
-#define EC_CMD_GET_VERSION 0x02
+#define EC_CMD_GET_VERSION 0x0002
 
 enum ec_current_image {
 	EC_IMAGE_UNKNOWN = 0,
@@ -618,7 +621,7 @@ struct ec_response_get_version {
 } __ec_align4;
 
 /* Read test */
-#define EC_CMD_READ_TEST 0x03
+#define EC_CMD_READ_TEST 0x0003
 
 /**
  * struct ec_params_read_test - Parameters for the read test command.
@@ -643,10 +646,10 @@ struct ec_response_read_test {
  *
  * Response is null-terminated string.
  */
-#define EC_CMD_GET_BUILD_INFO 0x04
+#define EC_CMD_GET_BUILD_INFO 0x0004
 
 /* Get chip info */
-#define EC_CMD_GET_CHIP_INFO 0x05
+#define EC_CMD_GET_CHIP_INFO 0x0005
 
 /**
  * struct ec_response_get_chip_info - Response to the get chip info command.
@@ -661,7 +664,7 @@ struct ec_response_get_chip_info {
 } __ec_align4;
 
 /* Get board HW version */
-#define EC_CMD_GET_BOARD_VERSION 0x06
+#define EC_CMD_GET_BOARD_VERSION 0x0006
 
 /**
  * struct ec_response_board_version - Response to the board version command.
@@ -679,7 +682,7 @@ struct ec_response_board_version {
  *
  * Response is params.size bytes of data.
  */
-#define EC_CMD_READ_MEMMAP 0x07
+#define EC_CMD_READ_MEMMAP 0x0007
 
 /**
  * struct ec_params_read_memmap - Parameters for the read memory map command.
@@ -692,7 +695,7 @@ struct ec_params_read_memmap {
 } __ec_align1;
 
 /* Read versions supported for a command */
-#define EC_CMD_GET_CMD_VERSIONS 0x08
+#define EC_CMD_GET_CMD_VERSIONS 0x0008
 
 /**
  * struct ec_params_get_cmd_versions - Parameters for the get command versions.
@@ -727,7 +730,7 @@ struct ec_response_get_cmd_versions {
  * lpc must read the status from the command register. Attempting this on
  * lpc will overwrite the args/parameter space and corrupt its data.
  */
-#define EC_CMD_GET_COMMS_STATUS		0x09
+#define EC_CMD_GET_COMMS_STATUS		0x0009
 
 /* Avoid using ec_status which is for return values */
 enum ec_comms_status {
@@ -744,7 +747,7 @@ struct ec_response_get_comms_status {
 } __ec_align4;
 
 /* Fake a variety of responses, purely for testing purposes. */
-#define EC_CMD_TEST_PROTOCOL		0x0a
+#define EC_CMD_TEST_PROTOCOL		0x000A
 
 /* Tell the EC what to send back to us. */
 struct ec_params_test_protocol {
@@ -759,7 +762,7 @@ struct ec_response_test_protocol {
 } __ec_align4;
 
 /* Get protocol information */
-#define EC_CMD_GET_PROTOCOL_INFO	0x0b
+#define EC_CMD_GET_PROTOCOL_INFO	0x000B
 
 /* Flags for ec_response_get_protocol_info.flags */
 /* EC_RES_IN_PROGRESS may be returned if a command is slow */
@@ -805,11 +808,11 @@ struct ec_response_get_set_value {
 } __ec_align4;
 
 /* More than one command can use these structs to get/set parameters. */
-#define EC_CMD_GSV_PAUSE_IN_S5	0x0c
+#define EC_CMD_GSV_PAUSE_IN_S5	0x000C
 
 /*****************************************************************************/
 /* List the features supported by the firmware */
-#define EC_CMD_GET_FEATURES  0x0d
+#define EC_CMD_GET_FEATURES  0x000D
 
 /* Supported features */
 enum ec_feature_code {
@@ -933,7 +936,7 @@ struct ec_response_get_features {
 /* Flash commands */
 
 /* Get flash info */
-#define EC_CMD_FLASH_INFO 0x10
+#define EC_CMD_FLASH_INFO 0x0010
 
 /**
  * struct ec_response_flash_info - Response to the flash info command.
@@ -1000,7 +1003,7 @@ struct ec_response_flash_info_1 {
  *
  * Response is params.size bytes of data.
  */
-#define EC_CMD_FLASH_READ 0x11
+#define EC_CMD_FLASH_READ 0x0011
 
 /**
  * struct ec_params_flash_read - Parameters for the flash read command.
@@ -1013,7 +1016,7 @@ struct ec_params_flash_read {
 } __ec_align4;
 
 /* Write flash */
-#define EC_CMD_FLASH_WRITE 0x12
+#define EC_CMD_FLASH_WRITE 0x0012
 #define EC_VER_FLASH_WRITE 1
 
 /* Version 0 of the flash command supported only 64 bytes of data */
@@ -1031,7 +1034,7 @@ struct ec_params_flash_write {
 } __ec_align4;
 
 /* Erase flash */
-#define EC_CMD_FLASH_ERASE 0x13
+#define EC_CMD_FLASH_ERASE 0x0013
 
 /**
  * struct ec_params_flash_erase - Parameters for the flash erase command.
@@ -1053,7 +1056,7 @@ struct ec_params_flash_erase {
  *
  * If mask=0, simply returns the current flags state.
  */
-#define EC_CMD_FLASH_PROTECT 0x15
+#define EC_CMD_FLASH_PROTECT 0x0015
 #define EC_VER_FLASH_PROTECT 1  /* Command version 1 */
 
 /* Flags for flash protection */
@@ -1110,7 +1113,7 @@ struct ec_response_flash_protect {
  */
 
 /* Get the region offset/size */
-#define EC_CMD_FLASH_REGION_INFO 0x16
+#define EC_CMD_FLASH_REGION_INFO 0x0016
 #define EC_VER_FLASH_REGION_INFO 1
 
 enum ec_flash_region {
@@ -1142,7 +1145,7 @@ struct ec_response_flash_region_info {
 } __ec_align4;
 
 /* Read/write VbNvContext */
-#define EC_CMD_VBNV_CONTEXT 0x17
+#define EC_CMD_VBNV_CONTEXT 0x0017
 #define EC_VER_VBNV_CONTEXT 1
 #define EC_VBNV_BLOCK_SIZE 16
 
@@ -1164,7 +1167,7 @@ struct ec_response_vbnvcontext {
 /* PWM commands */
 
 /* Get fan target RPM */
-#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x20
+#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x0020
 
 struct ec_response_pwm_get_fan_rpm {
 	uint32_t rpm;
@@ -1178,7 +1181,7 @@ struct ec_params_pwm_set_fan_target_rpm {
 } __ec_align_size1;
 
 /* Get keyboard backlight */
-#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x22
+#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x0022
 
 struct ec_response_pwm_get_keyboard_backlight {
 	uint8_t percent;
@@ -1186,20 +1189,20 @@ struct ec_response_pwm_get_keyboard_backlight {
 } __ec_align1;
 
 /* Set keyboard backlight */
-#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x23
+#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x0023
 
 struct ec_params_pwm_set_keyboard_backlight {
 	uint8_t percent;
 } __ec_align1;
 
 /* Set target fan PWM duty cycle */
-#define EC_CMD_PWM_SET_FAN_DUTY 0x24
+#define EC_CMD_PWM_SET_FAN_DUTY 0x0024
 
 struct ec_params_pwm_set_fan_duty {
 	uint32_t percent;
 } __ec_align4;
 
-#define EC_CMD_PWM_SET_DUTY 0x25
+#define EC_CMD_PWM_SET_DUTY 0x0025
 /* 16 bit duty cycle, 0xffff = 100% */
 #define EC_PWM_MAX_DUTY 0xffff
 
@@ -1219,7 +1222,7 @@ struct ec_params_pwm_set_duty {
 	uint8_t index;     /* Type-specific index, or 0 if unique */
 } __ec_align4;
 
-#define EC_CMD_PWM_GET_DUTY 0x26
+#define EC_CMD_PWM_GET_DUTY 0x0026
 
 struct ec_params_pwm_get_duty {
 	uint8_t pwm_type;  /* ec_pwm_type */
@@ -1237,7 +1240,7 @@ struct ec_response_pwm_get_duty {
  * into a subcommand. We'll make separate structs for subcommands with
  * different input args, so that we know how much to expect.
  */
-#define EC_CMD_LIGHTBAR_CMD 0x28
+#define EC_CMD_LIGHTBAR_CMD 0x0028
 
 struct rgb_s {
 	uint8_t r, g, b;
@@ -1431,7 +1434,7 @@ enum lightbar_command {
 /*****************************************************************************/
 /* LED control commands */
 
-#define EC_CMD_LED_CONTROL 0x29
+#define EC_CMD_LED_CONTROL 0x0029
 
 enum ec_led_id {
 	/* LED to indicate battery state of charge */
@@ -1488,7 +1491,7 @@ struct ec_response_led_control {
  */
 
 /* Verified boot hash command */
-#define EC_CMD_VBOOT_HASH 0x2A
+#define EC_CMD_VBOOT_HASH 0x002A
 
 struct ec_params_vboot_hash {
 	uint8_t cmd;             /* enum ec_vboot_hash_cmd */
@@ -1540,7 +1543,7 @@ enum ec_vboot_hash_status {
  * Motion sense commands. We'll make separate structs for sub-commands with
  * different input args, so that we know how much to expect.
  */
-#define EC_CMD_MOTION_SENSE_CMD 0x2B
+#define EC_CMD_MOTION_SENSE_CMD 0x002B
 
 /* Motion sense commands */
 enum motionsense_command {
@@ -1804,7 +1807,7 @@ struct ec_response_motion_sense {
 /* USB charging control commands */
 
 /* Set USB port charging mode */
-#define EC_CMD_USB_CHARGE_SET_MODE 0x30
+#define EC_CMD_USB_CHARGE_SET_MODE 0x0030
 
 struct ec_params_usb_charge_set_mode {
 	uint8_t usb_port_id;
@@ -1818,7 +1821,7 @@ struct ec_params_usb_charge_set_mode {
 #define EC_PSTORE_SIZE_MAX 64
 
 /* Get persistent storage info */
-#define EC_CMD_PSTORE_INFO 0x40
+#define EC_CMD_PSTORE_INFO 0x0040
 
 struct ec_response_pstore_info {
 	/* Persistent storage size, in bytes */
@@ -1832,7 +1835,7 @@ struct ec_response_pstore_info {
  *
  * Response is params.size bytes of data.
  */
-#define EC_CMD_PSTORE_READ 0x41
+#define EC_CMD_PSTORE_READ 0x0041
 
 struct ec_params_pstore_read {
 	uint32_t offset;   /* Byte offset to read */
@@ -1840,7 +1843,7 @@ struct ec_params_pstore_read {
 } __ec_align4;
 
 /* Write persistent storage */
-#define EC_CMD_PSTORE_WRITE 0x42
+#define EC_CMD_PSTORE_WRITE 0x0042
 
 struct ec_params_pstore_write {
 	uint32_t offset;   /* Byte offset to write */
@@ -1861,12 +1864,12 @@ struct ec_response_rtc {
 } __ec_align4;
 
 /* These use ec_response_rtc */
-#define EC_CMD_RTC_GET_VALUE 0x44
-#define EC_CMD_RTC_GET_ALARM 0x45
+#define EC_CMD_RTC_GET_VALUE 0x0044
+#define EC_CMD_RTC_GET_ALARM 0x0045
 
 /* These all use ec_params_rtc */
-#define EC_CMD_RTC_SET_VALUE 0x46
-#define EC_CMD_RTC_SET_ALARM 0x47
+#define EC_CMD_RTC_SET_VALUE 0x0046
+#define EC_CMD_RTC_SET_ALARM 0x0047
 
 /* Pass as time param to SET_ALARM to clear the current alarm */
 #define EC_RTC_ALARM_CLEAR 0
@@ -1878,8 +1881,8 @@ struct ec_response_rtc {
 #define EC_PORT80_SIZE_MAX 32
 
 /* Get last port80 code from previous boot */
-#define EC_CMD_PORT80_LAST_BOOT 0x48
-#define EC_CMD_PORT80_READ 0x48
+#define EC_CMD_PORT80_LAST_BOOT 0x0048
+#define EC_CMD_PORT80_READ 0x0048
 
 enum ec_port80_subcmd {
 	EC_PORT80_GET_INFO = 0,
@@ -1920,8 +1923,8 @@ struct ec_response_port80_last_boot {
  * Version 1 separates the CPU thermal limits from the fan control.
  */
 
-#define EC_CMD_THERMAL_SET_THRESHOLD 0x50
-#define EC_CMD_THERMAL_GET_THRESHOLD 0x51
+#define EC_CMD_THERMAL_SET_THRESHOLD 0x0050
+#define EC_CMD_THERMAL_GET_THRESHOLD 0x0051
 
 /* The version 0 structs are opaque. You have to know what they are for
  * the get/set commands to make any sense.
@@ -1983,10 +1986,10 @@ struct ec_params_thermal_set_threshold_v1 {
 /****************************************************************************/
 
 /* Toggle automatic fan control */
-#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52
+#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x0052
 
 /* Get TMP006 calibration data */
-#define EC_CMD_TMP006_GET_CALIBRATION 0x53
+#define EC_CMD_TMP006_GET_CALIBRATION 0x0053
 
 struct ec_params_tmp006_get_calibration {
 	uint8_t index;
@@ -2000,7 +2003,7 @@ struct ec_response_tmp006_get_calibration {
 } __ec_align4;
 
 /* Set TMP006 calibration data */
-#define EC_CMD_TMP006_SET_CALIBRATION 0x54
+#define EC_CMD_TMP006_SET_CALIBRATION 0x0054
 
 struct ec_params_tmp006_set_calibration {
 	uint8_t index;
@@ -2012,7 +2015,7 @@ struct ec_params_tmp006_set_calibration {
 } __ec_align4;
 
 /* Read raw TMP006 data */
-#define EC_CMD_TMP006_GET_RAW 0x55
+#define EC_CMD_TMP006_GET_RAW 0x0055
 
 struct ec_params_tmp006_get_raw {
 	uint8_t index;
@@ -2036,12 +2039,12 @@ struct ec_response_tmp006_get_raw {
  * to obtain the instantaneous state, use EC_CMD_MKBP_INFO with the type
  * EC_MKBP_INFO_CURRENT and event EC_MKBP_EVENT_KEY_MATRIX.
  */
-#define EC_CMD_MKBP_STATE 0x60
+#define EC_CMD_MKBP_STATE 0x0060
 
 /*
  * Provide information about various MKBP things.  See enum ec_mkbp_info_type.
  */
-#define EC_CMD_MKBP_INFO 0x61
+#define EC_CMD_MKBP_INFO 0x0061
 
 struct ec_response_mkbp_info {
 	uint32_t rows;
@@ -2095,7 +2098,7 @@ enum ec_mkbp_info_type {
 };
 
 /* Simulate key press */
-#define EC_CMD_MKBP_SIMULATE_KEY 0x62
+#define EC_CMD_MKBP_SIMULATE_KEY 0x0062
 
 struct ec_params_mkbp_simulate_key {
 	uint8_t col;
@@ -2104,8 +2107,8 @@ struct ec_params_mkbp_simulate_key {
 } __ec_align1;
 
 /* Configure keyboard scanning */
-#define EC_CMD_MKBP_SET_CONFIG 0x64
-#define EC_CMD_MKBP_GET_CONFIG 0x65
+#define EC_CMD_MKBP_SET_CONFIG 0x0064
+#define EC_CMD_MKBP_GET_CONFIG 0x0065
 
 /* flags */
 enum mkbp_config_flags {
@@ -2158,7 +2161,7 @@ struct ec_response_mkbp_get_config {
 } __ec_align_size1;
 
 /* Run the key scan emulation */
-#define EC_CMD_KEYSCAN_SEQ_CTRL 0x66
+#define EC_CMD_KEYSCAN_SEQ_CTRL 0x0066
 
 enum ec_keyscan_seq_cmd {
 	EC_KEYSCAN_SEQ_STATUS = 0,	/* Get status information */
@@ -2219,7 +2222,7 @@ struct ec_result_keyscan_seq_ctrl {
  *
  * The device replies with UNAVAILABLE if there aren't any pending events.
  */
-#define EC_CMD_GET_NEXT_EVENT 0x67
+#define EC_CMD_GET_NEXT_EVENT 0x0067
 
 enum ec_mkbp_event {
 	/* Keyboard matrix changed. The event data is the new matrix state. */
@@ -2298,7 +2301,7 @@ struct ec_response_get_next_event_v1 {
 /* Temperature sensor commands */
 
 /* Read temperature sensor info */
-#define EC_CMD_TEMP_SENSOR_GET_INFO 0x70
+#define EC_CMD_TEMP_SENSOR_GET_INFO 0x0070
 
 struct ec_params_temp_sensor_get_info {
 	uint8_t id;
@@ -2333,30 +2336,30 @@ struct ec_response_host_event_mask {
 } __ec_align4;
 
 /* These all use ec_response_host_event_mask */
-#define EC_CMD_HOST_EVENT_GET_B         0x87
-#define EC_CMD_HOST_EVENT_GET_SMI_MASK  0x88
-#define EC_CMD_HOST_EVENT_GET_SCI_MASK  0x89
-#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x8d
+#define EC_CMD_HOST_EVENT_GET_B         0x0087
+#define EC_CMD_HOST_EVENT_GET_SMI_MASK  0x0088
+#define EC_CMD_HOST_EVENT_GET_SCI_MASK  0x0089
+#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x008D
 
 /* These all use ec_params_host_event_mask */
-#define EC_CMD_HOST_EVENT_SET_SMI_MASK  0x8a
-#define EC_CMD_HOST_EVENT_SET_SCI_MASK  0x8b
-#define EC_CMD_HOST_EVENT_CLEAR         0x8c
-#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x8e
-#define EC_CMD_HOST_EVENT_CLEAR_B       0x8f
+#define EC_CMD_HOST_EVENT_SET_SMI_MASK  0x008A
+#define EC_CMD_HOST_EVENT_SET_SCI_MASK  0x008B
+#define EC_CMD_HOST_EVENT_CLEAR         0x008C
+#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x008E
+#define EC_CMD_HOST_EVENT_CLEAR_B       0x008F
 
 /*****************************************************************************/
 /* Switch commands */
 
 /* Enable/disable LCD backlight */
-#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x90
+#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x0090
 
 struct ec_params_switch_enable_backlight {
 	uint8_t enabled;
 } __ec_align1;
 
 /* Enable/disable WLAN/Bluetooth */
-#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91
+#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x0091
 #define EC_VER_SWITCH_ENABLE_WIRELESS 1
 
 /* Version 0 params; no response */
@@ -2396,7 +2399,7 @@ struct ec_response_switch_enable_wireless_v1 {
 /* GPIO commands. Only available on EC if write protect has been disabled. */
 
 /* Set GPIO output value */
-#define EC_CMD_GPIO_SET 0x92
+#define EC_CMD_GPIO_SET 0x0092
 
 struct ec_params_gpio_set {
 	char name[32];
@@ -2404,7 +2407,7 @@ struct ec_params_gpio_set {
 } __ec_align1;
 
 /* Get GPIO value */
-#define EC_CMD_GPIO_GET 0x93
+#define EC_CMD_GPIO_GET 0x0093
 
 /* Version 0 of input params and response */
 struct ec_params_gpio_get {
@@ -2458,7 +2461,7 @@ enum gpio_get_subcmd {
  */
 
 /* Read I2C bus */
-#define EC_CMD_I2C_READ 0x94
+#define EC_CMD_I2C_READ 0x0094
 
 struct ec_params_i2c_read {
 	uint16_t addr; /* 8-bit address (7-bit shifted << 1) */
@@ -2472,7 +2475,7 @@ struct ec_response_i2c_read {
 } __ec_align2;
 
 /* Write I2C bus */
-#define EC_CMD_I2C_WRITE 0x95
+#define EC_CMD_I2C_WRITE 0x0095
 
 struct ec_params_i2c_write {
 	uint16_t data;
@@ -2488,7 +2491,7 @@ struct ec_params_i2c_write {
 /* Force charge state machine to stop charging the battery or force it to
  * discharge the battery.
  */
-#define EC_CMD_CHARGE_CONTROL 0x96
+#define EC_CMD_CHARGE_CONTROL 0x0096
 #define EC_VER_CHARGE_CONTROL 1
 
 enum ec_charge_control_mode {
@@ -2504,7 +2507,7 @@ struct ec_params_charge_control {
 /*****************************************************************************/
 
 /* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */
-#define EC_CMD_CONSOLE_SNAPSHOT 0x97
+#define EC_CMD_CONSOLE_SNAPSHOT 0x0097
 
 /*
  * Read data from the saved snapshot. If the subcmd parameter is
@@ -2518,7 +2521,7 @@ struct ec_params_charge_control {
  * Response is null-terminated string.  Empty string, if there is no more
  * remaining output.
  */
-#define EC_CMD_CONSOLE_READ 0x98
+#define EC_CMD_CONSOLE_READ 0x0098
 
 enum ec_console_read_subcmd {
 	CONSOLE_READ_NEXT = 0,
@@ -2538,8 +2541,7 @@ struct ec_params_console_read_v1 {
  *	  EC_RES_SUCCESS if the command was successful.
  *	  EC_RES_ERROR if the cut off command failed.
  */
-
-#define EC_CMD_BATTERY_CUT_OFF 0x99
+#define EC_CMD_BATTERY_CUT_OFF 0x0099
 
 #define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN	(1 << 0)
 
@@ -2553,7 +2555,7 @@ struct ec_params_battery_cutoff {
 /*
  * Switch USB mux or return to automatic switching.
  */
-#define EC_CMD_USB_MUX 0x9a
+#define EC_CMD_USB_MUX 0x009A
 
 struct ec_params_usb_mux {
 	uint8_t mux;
@@ -2570,7 +2572,7 @@ enum ec_ldo_state {
 /*
  * Switch on/off a LDO.
  */
-#define EC_CMD_LDO_SET 0x9b
+#define EC_CMD_LDO_SET 0x009B
 
 struct ec_params_ldo_set {
 	uint8_t index;
@@ -2580,7 +2582,7 @@ struct ec_params_ldo_set {
 /*
  * Get LDO state.
  */
-#define EC_CMD_LDO_GET 0x9c
+#define EC_CMD_LDO_GET 0x009C
 
 struct ec_params_ldo_get {
 	uint8_t index;
@@ -2596,7 +2598,7 @@ struct ec_response_ldo_get {
 /*
  * Get power info.
  */
-#define EC_CMD_POWER_INFO 0x9d
+#define EC_CMD_POWER_INFO 0x009D
 
 struct ec_response_power_info {
 	uint32_t usb_dev_type;
@@ -2609,7 +2611,7 @@ struct ec_response_power_info {
 /*****************************************************************************/
 /* I2C passthru command */
 
-#define EC_CMD_I2C_PASSTHRU 0x9e
+#define EC_CMD_I2C_PASSTHRU 0x009E
 
 /* Read data; if not present, message is a write */
 #define EC_I2C_FLAG_READ	(1 << 15)
@@ -2644,7 +2646,7 @@ struct ec_response_i2c_passthru {
 /*****************************************************************************/
 /* Power button hang detect */
 
-#define EC_CMD_HANG_DETECT 0x9f
+#define EC_CMD_HANG_DETECT 0x009F
 
 /* Reasons to start hang detection timer */
 /* Power button pressed */
@@ -2703,7 +2705,7 @@ struct ec_params_hang_detect {
  * This is the single catch-all host command to exchange data regarding the
  * charge state machine (v2 and up).
  */
-#define EC_CMD_CHARGE_STATE 0xa0
+#define EC_CMD_CHARGE_STATE 0x00A0
 
 /* Subcommands for this host command */
 enum charge_state_command {
@@ -2774,7 +2776,7 @@ struct ec_response_charge_state {
 /*
  * Set maximum battery charging current.
  */
-#define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1
+#define EC_CMD_CHARGE_CURRENT_LIMIT 0x00A1
 
 struct ec_params_current_limit {
 	uint32_t limit; /* in mA */
@@ -2794,7 +2796,7 @@ struct ec_params_external_power_limit_v1 {
 #define EC_POWER_LIMIT_NONE 0xffff
 
 /* Inform the EC when entering a sleep state */
-#define EC_CMD_HOST_SLEEP_EVENT 0xa9
+#define EC_CMD_HOST_SLEEP_EVENT 0x00A9
 
 enum host_sleep_event {
 	HOST_SLEEP_EVENT_S3_SUSPEND   = 1,
@@ -2868,14 +2870,14 @@ struct ec_response_host_sleep_event_v1 {
 /* Smart battery pass-through */
 
 /* Get / Set 16-bit smart battery registers */
-#define EC_CMD_SB_READ_WORD   0xb0
-#define EC_CMD_SB_WRITE_WORD  0xb1
+#define EC_CMD_SB_READ_WORD   0x00B0
+#define EC_CMD_SB_WRITE_WORD  0x00B1
 
 /* Get / Set string smart battery parameters
  * formatted as SMBUS "block".
  */
-#define EC_CMD_SB_READ_BLOCK  0xb2
-#define EC_CMD_SB_WRITE_BLOCK 0xb3
+#define EC_CMD_SB_READ_BLOCK  0x00B2
+#define EC_CMD_SB_WRITE_BLOCK 0x00B3
 
 struct ec_params_sb_rd {
 	uint8_t reg;
@@ -2908,7 +2910,7 @@ struct ec_params_sb_wr_block {
  * requested value.
  */
 
-#define EC_CMD_BATTERY_VENDOR_PARAM 0xb4
+#define EC_CMD_BATTERY_VENDOR_PARAM 0x00B4
 
 enum ec_battery_vendor_param_mode {
 	BATTERY_VENDOR_PARAM_MODE_GET = 0,
@@ -3024,7 +3026,7 @@ struct ec_response_codec_gain {
  * TODO(crosbug.com/p/23747): This is a confusing name, since it doesn't
  * necessarily reboot the EC.  Rename to "image" or something similar?
  */
-#define EC_CMD_REBOOT_EC 0xd2
+#define EC_CMD_REBOOT_EC 0x00D2
 
 /* Command */
 enum ec_reboot_cmd {
@@ -3052,7 +3054,7 @@ struct ec_params_reboot_ec {
  * Returns variable-length platform-dependent panic information.  See panic.h
  * for details.
  */
-#define EC_CMD_GET_PANIC_INFO 0xd3
+#define EC_CMD_GET_PANIC_INFO 0x00D3
 
 /*****************************************************************************/
 /*
@@ -3260,7 +3262,7 @@ enum mkbp_cec_event {
  *
  * Use EC_CMD_REBOOT_EC to reboot the EC more politely.
  */
-#define EC_CMD_REBOOT 0xd1  /* Think "die" */
+#define EC_CMD_REBOOT 0x00D1  /* Think "die" */
 
 /*
  * Resend last response (not supported on LPC).
@@ -3269,7 +3271,7 @@ enum mkbp_cec_event {
  * there was no previous command, or the previous command's response was too
  * big to save.
  */
-#define EC_CMD_RESEND_RESPONSE 0xdb
+#define EC_CMD_RESEND_RESPONSE 0x00DB
 
 /*
  * This header byte on a command indicate version 0. Any header byte less
@@ -3281,7 +3283,7 @@ enum mkbp_cec_event {
  *
  * The old EC interface must not use commands 0xdc or higher.
  */
-#define EC_CMD_VERSION0 0xdc
+#define EC_CMD_VERSION0 0x00DC
 
 #endif  /* !__ACPI__ */
 
@@ -3293,7 +3295,7 @@ enum mkbp_cec_event {
  */
 
 /* EC to PD MCU exchange status command */
-#define EC_CMD_PD_EXCHANGE_STATUS 0x100
+#define EC_CMD_PD_EXCHANGE_STATUS 0x0100
 
 /* Status of EC being sent to PD */
 struct ec_params_pd_status {
@@ -3307,7 +3309,7 @@ struct ec_response_pd_status {
 } __ec_align_size1;
 
 /* Set USB type-C port role and muxes */
-#define EC_CMD_USB_PD_CONTROL 0x101
+#define EC_CMD_USB_PD_CONTROL 0x0101
 
 enum usb_pd_control_role {
 	USB_PD_CTRL_ROLE_NO_CHANGE = 0,
@@ -3360,7 +3362,7 @@ struct ec_response_usb_pd_control_v1 {
 	char state[32];
 } __ec_align1;
 
-#define EC_CMD_USB_PD_PORTS 0x102
+#define EC_CMD_USB_PD_PORTS 0x0102
 
 /* Maximum number of PD ports on a device, num_ports will be <= this */
 #define EC_USB_PD_MAX_PORTS 8
@@ -3369,7 +3371,7 @@ struct ec_response_usb_pd_ports {
 	uint8_t num_ports;
 } __ec_align1;
 
-#define EC_CMD_USB_PD_POWER_INFO 0x103
+#define EC_CMD_USB_PD_POWER_INFO 0x0103
 
 #define PD_POWER_CHARGING_PORT 0xff
 struct ec_params_usb_pd_power_info {
@@ -3536,7 +3538,7 @@ struct mcdp_info {
 #define MCDP_FAMILY(family) ((family[0] << 8) | family[1])
 
 /* Get info about USB-C SS muxes */
-#define EC_CMD_USB_PD_MUX_INFO 0x11a
+#define EC_CMD_USB_PD_MUX_INFO 0x011A
 
 struct ec_params_usb_pd_mux_info {
 	uint8_t port; /* USB-C port number */
@@ -3551,6 +3553,41 @@ struct ec_params_usb_pd_mux_info {
 struct ec_response_usb_pd_mux_info {
 	uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */
 } __ec_align1;
+/*****************************************************************************/
+/*
+ * Reserve a range of host commands for board-specific, experimental, or
+ * special purpose features. These can be (re)used without updating this file.
+ *
+ * CAUTION: Don't go nuts with this. Shipping products should document ALL
+ * their EC commands for easier development, testing, debugging, and support.
+ *
+ * All commands MUST be #defined to be 4-digit UPPER CASE hex values
+ * (e.g., 0x00AB, not 0xab) for CONFIG_HOSTCMD_SECTION_SORTED to work.
+ *
+ * In your experimental code, you may want to do something like this:
+ *
+ *   #define EC_CMD_MAGIC_FOO 0x0000
+ *   #define EC_CMD_MAGIC_BAR 0x0001
+ *   #define EC_CMD_MAGIC_HEY 0x0002
+ *
+ *   DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_FOO, magic_foo_handler,
+ *      EC_VER_MASK(0);
+ *
+ *   DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_BAR, magic_bar_handler,
+ *      EC_VER_MASK(0);
+ *
+ *   DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_HEY, magic_hey_handler,
+ *      EC_VER_MASK(0);
+ */
+#define EC_CMD_BOARD_SPECIFIC_BASE 0x3E00
+#define EC_CMD_BOARD_SPECIFIC_LAST 0x3FFF
+
+/*
+ * Given the private host command offset, calculate the true private host
+ * command value.
+ */
+#define EC_PRIVATE_HOST_COMMAND_VALUE(command) \
+	(EC_CMD_BOARD_SPECIFIC_BASE + (command))
 
 /*****************************************************************************/
 /*
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 06/30] mfd: cros_ec: use BIT macro
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (4 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 05/30] mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 07/30] mfd: cros_ec: Update ACPI interface definition Gwendal Grignou
                   ` (26 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Replace (1 << ...) with BIT().

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 110 +++++++++++++--------------
 1 file changed, 55 insertions(+), 55 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 8ad77d8a9141..e97e9e976bd0 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -28,7 +28,7 @@
 #define EC_PROTO_VERSION          0x00000002
 
 /* Command version mask */
-#define EC_VER_MASK(version) (1UL << (version))
+#define EC_VER_MASK(version) BIT(version)
 
 /* I/O addresses for ACPI commands */
 #define EC_LPC_ADDR_ACPI_DATA  0x62
@@ -57,13 +57,13 @@
 #define EC_HOST_CMD_REGION_SIZE 0x80
 
 /* EC command register bit functions */
-#define EC_LPC_CMDR_DATA	(1 << 0)  /* Data ready for host to read */
-#define EC_LPC_CMDR_PENDING	(1 << 1)  /* Write pending to EC */
-#define EC_LPC_CMDR_BUSY	(1 << 2)  /* EC is busy processing a command */
-#define EC_LPC_CMDR_CMD		(1 << 3)  /* Last host write was a command */
-#define EC_LPC_CMDR_ACPI_BRST	(1 << 4)  /* Burst mode (not used) */
-#define EC_LPC_CMDR_SCI		(1 << 5)  /* SCI event is pending */
-#define EC_LPC_CMDR_SMI		(1 << 6)  /* SMI event is pending */
+#define EC_LPC_CMDR_DATA	BIT(0)  /* Data ready for host to read */
+#define EC_LPC_CMDR_PENDING	BIT(1)  /* Write pending to EC */
+#define EC_LPC_CMDR_BUSY	BIT(2)  /* EC is busy processing a command */
+#define EC_LPC_CMDR_CMD		BIT(3)  /* Last host write was a command */
+#define EC_LPC_CMDR_ACPI_BRST	BIT(4)  /* Burst mode (not used) */
+#define EC_LPC_CMDR_SCI		BIT(5)  /* SCI event is pending */
+#define EC_LPC_CMDR_SMI		BIT(6)  /* SMI event is pending */
 
 #define EC_LPC_ADDR_MEMMAP       0x900
 #define EC_MEMMAP_SIZE         255 /* ACPI IO buffer max is 255 bytes */
@@ -110,8 +110,8 @@
 
 /* Define the format of the accelerometer mapped memory status byte. */
 #define EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK  0x0f
-#define EC_MEMMAP_ACC_STATUS_BUSY_BIT        (1 << 4)
-#define EC_MEMMAP_ACC_STATUS_PRESENCE_BIT    (1 << 7)
+#define EC_MEMMAP_ACC_STATUS_BUSY_BIT        BIT(4)
+#define EC_MEMMAP_ACC_STATUS_PRESENCE_BIT    BIT(7)
 
 /* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */
 #define EC_TEMP_SENSOR_ENTRIES     16
@@ -336,7 +336,7 @@ enum host_event_code {
 	EC_HOST_EVENT_INVALID = 32
 };
 /* Host event mask */
-#define EC_HOST_EVENT_MASK(event_code) (1UL << ((event_code) - 1))
+#define EC_HOST_EVENT_MASK(event_code) BIT_ULL((event_code) - 1)
 
 /**
  * struct ec_lpc_host_args - Arguments at EC_LPC_ADDR_HOST_ARGS
@@ -734,7 +734,7 @@ struct ec_response_get_cmd_versions {
 
 /* Avoid using ec_status which is for return values */
 enum ec_comms_status {
-	EC_COMMS_STATUS_PROCESSING	= 1 << 0,	/* Processing cmd */
+	EC_COMMS_STATUS_PROCESSING	= BIT(0),	/* Processing cmd */
 };
 
 /**
@@ -766,7 +766,7 @@ struct ec_response_test_protocol {
 
 /* Flags for ec_response_get_protocol_info.flags */
 /* EC_RES_IN_PROGRESS may be returned if a command is slow */
-#define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED (1 << 0)
+#define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED BIT(0)
 
 /**
  * struct ec_response_get_protocol_info - Response to the get protocol info.
@@ -925,8 +925,8 @@ enum ec_feature_code {
 	EC_FEATURE_ISH = 40,
 };
 
-#define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32))
-#define EC_FEATURE_MASK_1(event_code) (1UL << (event_code - 32))
+#define EC_FEATURE_MASK_0(event_code) BIT(event_code % 32)
+#define EC_FEATURE_MASK_1(event_code) BIT(event_code - 32)
 
 struct ec_response_get_features {
 	uint32_t flags[2];
@@ -961,7 +961,7 @@ struct ec_response_flash_info {
  * Flags for version 1+ flash info command
  * EC flash erases bits to 0 instead of 1.
  */
-#define EC_FLASH_INFO_ERASE_TO_0 (1 << 0)
+#define EC_FLASH_INFO_ERASE_TO_0 BIT(0)
 
 /**
  * struct ec_response_flash_info_1 - Response to the flash info v1 command.
@@ -1061,26 +1061,26 @@ struct ec_params_flash_erase {
 
 /* Flags for flash protection */
 /* RO flash code protected when the EC boots */
-#define EC_FLASH_PROTECT_RO_AT_BOOT         (1 << 0)
+#define EC_FLASH_PROTECT_RO_AT_BOOT         BIT(0)
 /*
  * RO flash code protected now.  If this bit is set, at-boot status cannot
  * be changed.
  */
-#define EC_FLASH_PROTECT_RO_NOW             (1 << 1)
+#define EC_FLASH_PROTECT_RO_NOW             BIT(1)
 /* Entire flash code protected now, until reboot. */
-#define EC_FLASH_PROTECT_ALL_NOW            (1 << 2)
+#define EC_FLASH_PROTECT_ALL_NOW            BIT(2)
 /* Flash write protect GPIO is asserted now */
-#define EC_FLASH_PROTECT_GPIO_ASSERTED      (1 << 3)
+#define EC_FLASH_PROTECT_GPIO_ASSERTED      BIT(3)
 /* Error - at least one bank of flash is stuck locked, and cannot be unlocked */
-#define EC_FLASH_PROTECT_ERROR_STUCK        (1 << 4)
+#define EC_FLASH_PROTECT_ERROR_STUCK        BIT(4)
 /*
  * Error - flash protection is in inconsistent state.  At least one bank of
  * flash which should be protected is not protected.  Usually fixed by
  * re-requesting the desired flags, or by a hard reset if that fails.
  */
-#define EC_FLASH_PROTECT_ERROR_INCONSISTENT (1 << 5)
+#define EC_FLASH_PROTECT_ERROR_INCONSISTENT BIT(5)
 /* Entire flash code protected when the EC boots */
-#define EC_FLASH_PROTECT_ALL_AT_BOOT        (1 << 6)
+#define EC_FLASH_PROTECT_ALL_AT_BOOT        BIT(6)
 
 /**
  * struct ec_params_flash_protect - Parameters for the flash protect command.
@@ -1451,8 +1451,8 @@ enum ec_led_id {
 };
 
 /* LED control flags */
-#define EC_LED_FLAGS_QUERY (1 << 0) /* Query LED capability only */
-#define EC_LED_FLAGS_AUTO  (1 << 1) /* Switch LED back to automatic control */
+#define EC_LED_FLAGS_QUERY BIT(0) /* Query LED capability only */
+#define EC_LED_FLAGS_AUTO  BIT(1) /* Switch LED back to automatic control */
 
 enum ec_led_colors {
 	EC_LED_COLOR_RED = 0,
@@ -2116,13 +2116,13 @@ enum mkbp_config_flags {
 };
 
 enum mkbp_config_valid {
-	EC_MKBP_VALID_SCAN_PERIOD		= 1 << 0,
-	EC_MKBP_VALID_POLL_TIMEOUT		= 1 << 1,
-	EC_MKBP_VALID_MIN_POST_SCAN_DELAY	= 1 << 3,
-	EC_MKBP_VALID_OUTPUT_SETTLE		= 1 << 4,
-	EC_MKBP_VALID_DEBOUNCE_DOWN		= 1 << 5,
-	EC_MKBP_VALID_DEBOUNCE_UP		= 1 << 6,
-	EC_MKBP_VALID_FIFO_MAX_DEPTH		= 1 << 7,
+	EC_MKBP_VALID_SCAN_PERIOD		= BIT(0),
+	EC_MKBP_VALID_POLL_TIMEOUT		= BIT(1),
+	EC_MKBP_VALID_MIN_POST_SCAN_DELAY	= BIT(3),
+	EC_MKBP_VALID_OUTPUT_SETTLE		= BIT(4),
+	EC_MKBP_VALID_DEBOUNCE_DOWN		= BIT(5),
+	EC_MKBP_VALID_DEBOUNCE_UP		= BIT(6),
+	EC_MKBP_VALID_FIFO_MAX_DEPTH		= BIT(7),
 };
 
 /*
@@ -2176,7 +2176,7 @@ enum ec_collect_flags {
 	 * Indicates this scan was processed by the EC. Due to timing, some
 	 * scans may be skipped.
 	 */
-	EC_KEYSCAN_SEQ_FLAG_DONE	= 1 << 0,
+	EC_KEYSCAN_SEQ_FLAG_DONE	= BIT(0),
 };
 
 struct ec_collect_item {
@@ -2543,7 +2543,7 @@ struct ec_params_console_read_v1 {
  */
 #define EC_CMD_BATTERY_CUT_OFF 0x0099
 
-#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN	(1 << 0)
+#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN	BIT(0)
 
 struct ec_params_battery_cutoff {
 	uint8_t flags;
@@ -2614,13 +2614,13 @@ struct ec_response_power_info {
 #define EC_CMD_I2C_PASSTHRU 0x009E
 
 /* Read data; if not present, message is a write */
-#define EC_I2C_FLAG_READ	(1 << 15)
+#define EC_I2C_FLAG_READ	BIT(15)
 
 /* Mask for address */
 #define EC_I2C_ADDR_MASK	0x3ff
 
-#define EC_I2C_STATUS_NAK	(1 << 0) /* Transfer was not acknowledged */
-#define EC_I2C_STATUS_TIMEOUT	(1 << 1) /* Timeout during transfer */
+#define EC_I2C_STATUS_NAK	BIT(0) /* Transfer was not acknowledged */
+#define EC_I2C_STATUS_TIMEOUT	BIT(1) /* Timeout during transfer */
 
 /* Any error */
 #define EC_I2C_STATUS_ERROR	(EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT)
@@ -2650,27 +2650,27 @@ struct ec_response_i2c_passthru {
 
 /* Reasons to start hang detection timer */
 /* Power button pressed */
-#define EC_HANG_START_ON_POWER_PRESS  (1 << 0)
+#define EC_HANG_START_ON_POWER_PRESS  BIT(0)
 
 /* Lid closed */
-#define EC_HANG_START_ON_LID_CLOSE    (1 << 1)
+#define EC_HANG_START_ON_LID_CLOSE    BIT(1)
 
  /* Lid opened */
-#define EC_HANG_START_ON_LID_OPEN     (1 << 2)
+#define EC_HANG_START_ON_LID_OPEN     BIT(2)
 
 /* Start of AP S3->S0 transition (booting or resuming from suspend) */
-#define EC_HANG_START_ON_RESUME       (1 << 3)
+#define EC_HANG_START_ON_RESUME       BIT(3)
 
 /* Reasons to cancel hang detection */
 
 /* Power button released */
-#define EC_HANG_STOP_ON_POWER_RELEASE (1 << 8)
+#define EC_HANG_STOP_ON_POWER_RELEASE BIT(8)
 
 /* Any host command from AP received */
-#define EC_HANG_STOP_ON_HOST_COMMAND  (1 << 9)
+#define EC_HANG_STOP_ON_HOST_COMMAND  BIT(9)
 
 /* Stop on end of AP S0->S3 transition (suspending or shutting down) */
-#define EC_HANG_STOP_ON_SUSPEND       (1 << 10)
+#define EC_HANG_STOP_ON_SUSPEND       BIT(10)
 
 /*
  * If this flag is set, all the other fields are ignored, and the hang detect
@@ -2678,14 +2678,14 @@ struct ec_response_i2c_passthru {
  * without reconfiguring any of the other hang detect settings.  Note that
  * you must previously have configured the timeouts.
  */
-#define EC_HANG_START_NOW             (1 << 30)
+#define EC_HANG_START_NOW             BIT(30)
 
 /*
  * If this flag is set, all the other fields are ignored (including
  * EC_HANG_START_NOW).  This provides the AP a way to stop the hang timer
  * without reconfiguring any of the other hang detect settings.
  */
-#define EC_HANG_STOP_NOW              (1 << 31)
+#define EC_HANG_STOP_NOW              BIT(31)
 
 struct ec_params_hang_detect {
 	/* Flags; see EC_HANG_* */
@@ -3040,8 +3040,8 @@ enum ec_reboot_cmd {
 };
 
 /* Flags for ec_params_reboot_ec.reboot_flags */
-#define EC_REBOOT_FLAG_RESERVED0      (1 << 0)  /* Was recovery request */
-#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN (1 << 1)  /* Reboot after AP shutdown */
+#define EC_REBOOT_FLAG_RESERVED0      BIT(0)  /* Was recovery request */
+#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN BIT(1)  /* Reboot after AP shutdown */
 
 struct ec_params_reboot_ec {
 	uint8_t cmd;           /* enum ec_reboot_cmd */
@@ -3343,9 +3343,9 @@ struct ec_params_usb_pd_control {
 	uint8_t swap;
 } __ec_align1;
 
-#define PD_CTRL_RESP_ENABLED_COMMS      (1 << 0) /* Communication enabled */
-#define PD_CTRL_RESP_ENABLED_CONNECTED  (1 << 1) /* Device connected */
-#define PD_CTRL_RESP_ENABLED_PD_CAPABLE (1 << 2) /* Partner is PD capable */
+#define PD_CTRL_RESP_ENABLED_COMMS      BIT(0) /* Communication enabled */
+#define PD_CTRL_RESP_ENABLED_CONNECTED  BIT(1) /* Device connected */
+#define PD_CTRL_RESP_ENABLED_PD_CAPABLE BIT(2) /* Partner is PD capable */
 
 #define PD_CTRL_RESP_ROLE_POWER         BIT(0) /* 0=SNK/1=SRC */
 #define PD_CTRL_RESP_ROLE_DATA          BIT(1) /* 0=UFP/1=DFP */
@@ -3545,10 +3545,10 @@ struct ec_params_usb_pd_mux_info {
 } __ec_align1;
 
 /* Flags representing mux state */
-#define USB_PD_MUX_USB_ENABLED       (1 << 0)
-#define USB_PD_MUX_DP_ENABLED        (1 << 1)
-#define USB_PD_MUX_POLARITY_INVERTED (1 << 2)
-#define USB_PD_MUX_HPD_IRQ           (1 << 3)
+#define USB_PD_MUX_USB_ENABLED       BIT(0) /* USB connected */
+#define USB_PD_MUX_DP_ENABLED        BIT(1) /* DP connected */
+#define USB_PD_MUX_POLARITY_INVERTED BIT(2) /* CC line Polarity inverted */
+#define USB_PD_MUX_HPD_IRQ           BIT(3) /* HPD IRQ is asserted */
 
 struct ec_response_usb_pd_mux_info {
 	uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 07/30] mfd: cros_ec: Update ACPI interface definition
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (5 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 06/30] mfd: cros_ec: use BIT macro Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 08/30] mfd: cros_ec: move HDMI CEC API definition Gwendal Grignou
                   ` (25 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Add more fields and improve API when EC presents data through ACPI
memory space.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 419 +++++++++++++++++++--------
 1 file changed, 293 insertions(+), 126 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index e97e9e976bd0..575066b90bab 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -83,13 +83,15 @@
 /* Unused 0x28 - 0x2f */
 #define EC_MEMMAP_SWITCHES         0x30	/* 8 bits */
 /* Unused 0x31 - 0x33 */
-#define EC_MEMMAP_HOST_EVENTS      0x34 /* 32 bits */
-/* Reserve 0x38 - 0x3f for additional host event-related stuff */
-/* Battery values are all 32 bits */
+#define EC_MEMMAP_HOST_EVENTS      0x34 /* 64 bits */
+/* Battery values are all 32 bits, unless otherwise noted. */
 #define EC_MEMMAP_BATT_VOLT        0x40 /* Battery Present Voltage */
 #define EC_MEMMAP_BATT_RATE        0x44 /* Battery Present Rate */
 #define EC_MEMMAP_BATT_CAP         0x48 /* Battery Remaining Capacity */
-#define EC_MEMMAP_BATT_FLAG        0x4c /* Battery State, defined below */
+#define EC_MEMMAP_BATT_FLAG        0x4c /* Battery State, see below (8-bit) */
+#define EC_MEMMAP_BATT_COUNT       0x4d /* Battery Count (8-bit) */
+#define EC_MEMMAP_BATT_INDEX       0x4e /* Current Battery Data Index (8-bit) */
+/* Unused 0x4f */
 #define EC_MEMMAP_BATT_DCAP        0x50 /* Battery Design Capacity */
 #define EC_MEMMAP_BATT_DVLT        0x54 /* Battery Design Voltage */
 #define EC_MEMMAP_BATT_LFCC        0x58 /* Battery Last Full Charge Capacity */
@@ -103,10 +105,19 @@
 /* Unused 0x84 - 0x8f */
 #define EC_MEMMAP_ACC_STATUS       0x90 /* Accelerometer status (8 bits )*/
 /* Unused 0x91 */
-#define EC_MEMMAP_ACC_DATA         0x92 /* Accelerometer data 0x92 - 0x9f */
+#define EC_MEMMAP_ACC_DATA         0x92 /* Accelerometers data 0x92 - 0x9f */
+/* 0x92: Lid Angle if available, LID_ANGLE_UNRELIABLE otherwise */
+/* 0x94 - 0x99: 1st Accelerometer */
+/* 0x9a - 0x9f: 2nd Accelerometer */
 #define EC_MEMMAP_GYRO_DATA        0xa0 /* Gyroscope data 0xa0 - 0xa5 */
-/* Unused 0xa6 - 0xfe (remember, 0xff is NOT part of the memmap region) */
+/* Unused 0xa6 - 0xdf */
 
+/*
+ * ACPI is unable to access memory mapped data at or above this offset due to
+ * limitations of the ACPI protocol. Do not place data in the range 0xe0 - 0xfe
+ * which might be needed by ACPI.
+ */
+#define EC_MEMMAP_NO_ACPI 0xe0
 
 /* Define the format of the accelerometer mapped memory status byte. */
 #define EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK  0x0f
@@ -155,6 +166,8 @@
 #define EC_BATT_FLAG_DISCHARGING  0x04
 #define EC_BATT_FLAG_CHARGING     0x08
 #define EC_BATT_FLAG_LEVEL_CRITICAL 0x10
+/* Set if some of the static/dynamic data is invalid (or outdated). */
+#define EC_BATT_FLAG_INVALID_DATA 0x20
 
 /* Switch flags at EC_MEMMAP_SWITCHES */
 #define EC_SWITCH_LID_OPEN               0x01
@@ -180,12 +193,200 @@
 #define EC_WIRELESS_SWITCH_WWAN       0x04  /* WWAN power */
 #define EC_WIRELESS_SWITCH_WLAN_POWER 0x08  /* WLAN power */
 
+/*****************************************************************************/
+/*
+ * ACPI commands
+ *
+ * These are valid ONLY on the ACPI command/data port.
+ */
+
+/*
+ * ACPI Read Embedded Controller
+ *
+ * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
+ *
+ * Use the following sequence:
+ *
+ *    - Write EC_CMD_ACPI_READ to EC_LPC_ADDR_ACPI_CMD
+ *    - Wait for EC_LPC_CMDR_PENDING bit to clear
+ *    - Write address to EC_LPC_ADDR_ACPI_DATA
+ *    - Wait for EC_LPC_CMDR_DATA bit to set
+ *    - Read value from EC_LPC_ADDR_ACPI_DATA
+ */
+#define EC_CMD_ACPI_READ 0x0080
+
+/*
+ * ACPI Write Embedded Controller
+ *
+ * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
+ *
+ * Use the following sequence:
+ *
+ *    - Write EC_CMD_ACPI_WRITE to EC_LPC_ADDR_ACPI_CMD
+ *    - Wait for EC_LPC_CMDR_PENDING bit to clear
+ *    - Write address to EC_LPC_ADDR_ACPI_DATA
+ *    - Wait for EC_LPC_CMDR_PENDING bit to clear
+ *    - Write value to EC_LPC_ADDR_ACPI_DATA
+ */
+#define EC_CMD_ACPI_WRITE 0x0081
+
+/*
+ * ACPI Burst Enable Embedded Controller
+ *
+ * This enables burst mode on the EC to allow the host to issue several
+ * commands back-to-back. While in this mode, writes to mapped multi-byte
+ * data are locked out to ensure data consistency.
+ */
+#define EC_CMD_ACPI_BURST_ENABLE 0x0082
+
+/*
+ * ACPI Burst Disable Embedded Controller
+ *
+ * This disables burst mode on the EC and stops preventing EC writes to mapped
+ * multi-byte data.
+ */
+#define EC_CMD_ACPI_BURST_DISABLE 0x0083
+
+/*
+ * ACPI Query Embedded Controller
+ *
+ * This clears the lowest-order bit in the currently pending host events, and
+ * sets the result code to the 1-based index of the bit (event 0x00000001 = 1,
+ * event 0x80000000 = 32), or 0 if no event was pending.
+ */
+#define EC_CMD_ACPI_QUERY_EVENT 0x0084
+
+/* Valid addresses in ACPI memory space, for read/write commands */
+
+/* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */
+#define EC_ACPI_MEM_VERSION            0x00
+/*
+ * Test location; writing value here updates test compliment byte to (0xff -
+ * value).
+ */
+#define EC_ACPI_MEM_TEST               0x01
+/* Test compliment; writes here are ignored. */
+#define EC_ACPI_MEM_TEST_COMPLIMENT    0x02
+
+/* Keyboard backlight brightness percent (0 - 100) */
+#define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03
+/* DPTF Target Fan Duty (0-100, 0xff for auto/none) */
+#define EC_ACPI_MEM_FAN_DUTY           0x04
+
+/*
+ * DPTF temp thresholds. Any of the EC's temp sensors can have up to two
+ * independent thresholds attached to them. The current value of the ID
+ * register determines which sensor is affected by the THRESHOLD and COMMIT
+ * registers. The THRESHOLD register uses the same EC_TEMP_SENSOR_OFFSET scheme
+ * as the memory-mapped sensors. The COMMIT register applies those settings.
+ *
+ * The spec does not mandate any way to read back the threshold settings
+ * themselves, but when a threshold is crossed the AP needs a way to determine
+ * which sensor(s) are responsible. Each reading of the ID register clears and
+ * returns one sensor ID that has crossed one of its threshold (in either
+ * direction) since the last read. A value of 0xFF means "no new thresholds
+ * have tripped". Setting or enabling the thresholds for a sensor will clear
+ * the unread event count for that sensor.
+ */
+#define EC_ACPI_MEM_TEMP_ID            0x05
+#define EC_ACPI_MEM_TEMP_THRESHOLD     0x06
+#define EC_ACPI_MEM_TEMP_COMMIT        0x07
+/*
+ * Here are the bits for the COMMIT register:
+ *   bit 0 selects the threshold index for the chosen sensor (0/1)
+ *   bit 1 enables/disables the selected threshold (0 = off, 1 = on)
+ * Each write to the commit register affects one threshold.
+ */
+#define EC_ACPI_MEM_TEMP_COMMIT_SELECT_MASK BIT(0)
+#define EC_ACPI_MEM_TEMP_COMMIT_ENABLE_MASK BIT(1)
+/*
+ * Example:
+ *
+ * Set the thresholds for sensor 2 to 50 C and 60 C:
+ *   write 2 to [0x05]      --  select temp sensor 2
+ *   write 0x7b to [0x06]   --  C_TO_K(50) - EC_TEMP_SENSOR_OFFSET
+ *   write 0x2 to [0x07]    --  enable threshold 0 with this value
+ *   write 0x85 to [0x06]   --  C_TO_K(60) - EC_TEMP_SENSOR_OFFSET
+ *   write 0x3 to [0x07]    --  enable threshold 1 with this value
+ *
+ * Disable the 60 C threshold, leaving the 50 C threshold unchanged:
+ *   write 2 to [0x05]      --  select temp sensor 2
+ *   write 0x1 to [0x07]    --  disable threshold 1
+ */
+
+/* DPTF battery charging current limit */
+#define EC_ACPI_MEM_CHARGING_LIMIT     0x08
+
+/* Charging limit is specified in 64 mA steps */
+#define EC_ACPI_MEM_CHARGING_LIMIT_STEP_MA   64
+/* Value to disable DPTF battery charging limit */
+#define EC_ACPI_MEM_CHARGING_LIMIT_DISABLED  0xff
+
+/*
+ * Report device orientation
+ *  Bits       Definition
+ *  3:1        Device DPTF Profile Number (DDPN)
+ *               0   = Reserved for backward compatibility (indicates no valid
+ *                     profile number. Host should fall back to using TBMD).
+ *              1..7 = DPTF Profile number to indicate to host which table needs
+ *                     to be loaded.
+ *   0         Tablet Mode Device Indicator (TBMD)
+ */
+#define EC_ACPI_MEM_DEVICE_ORIENTATION 0x09
+#define EC_ACPI_MEM_TBMD_SHIFT         0
+#define EC_ACPI_MEM_TBMD_MASK          0x1
+#define EC_ACPI_MEM_DDPN_SHIFT         1
+#define EC_ACPI_MEM_DDPN_MASK          0x7
+
+/*
+ * Report device features. Uses the same format as the host command, except:
+ *
+ * bit 0 (EC_FEATURE_LIMITED) changes meaning from "EC code has a limited set
+ * of features", which is of limited interest when the system is already
+ * interpreting ACPI bytecode, to "EC_FEATURES[0-7] is not supported". Since
+ * these are supported, it defaults to 0.
+ * This allows detecting the presence of this field since older versions of
+ * the EC codebase would simply return 0xff to that unknown address. Check
+ * FEATURES0 != 0xff (or FEATURES0[0] == 0) to make sure that the other bits
+ * are valid.
+ */
+#define EC_ACPI_MEM_DEVICE_FEATURES0 0x0a
+#define EC_ACPI_MEM_DEVICE_FEATURES1 0x0b
+#define EC_ACPI_MEM_DEVICE_FEATURES2 0x0c
+#define EC_ACPI_MEM_DEVICE_FEATURES3 0x0d
+#define EC_ACPI_MEM_DEVICE_FEATURES4 0x0e
+#define EC_ACPI_MEM_DEVICE_FEATURES5 0x0f
+#define EC_ACPI_MEM_DEVICE_FEATURES6 0x10
+#define EC_ACPI_MEM_DEVICE_FEATURES7 0x11
+
+#define EC_ACPI_MEM_BATTERY_INDEX    0x12
+
+/*
+ * USB Port Power. Each bit indicates whether the corresponding USB ports' power
+ * is enabled (1) or disabled (0).
+ *   bit 0 USB port ID 0
+ *   ...
+ *   bit 7 USB port ID 7
+ */
+#define EC_ACPI_MEM_USB_PORT_POWER 0x13
+
+/*
+ * ACPI addresses 0x20 - 0xff map to EC_MEMMAP offset 0x00 - 0xdf.  This data
+ * is read-only from the AP.  Added in EC_ACPI_MEM_VERSION 2.
+ */
+#define EC_ACPI_MEM_MAPPED_BEGIN   0x20
+#define EC_ACPI_MEM_MAPPED_SIZE    0xe0
+
+/* Current version of ACPI memory address space */
+#define EC_ACPI_MEM_VERSION_CURRENT 2
+
+
 /*
  * This header file is used in coreboot both in C and ACPI code.  The ACPI code
  * is pre-processed to handle constants but the ASL compiler is unable to
  * handle actual C code so keep it separate.
  */
-#ifndef __ACPI__
+
 
 /*
  * Attributes for EC request and response packets.  Just defining __packed
@@ -238,7 +439,7 @@
 #define EC_LPC_STATUS_PROCESSING  0x04
 /* Last write to EC was a command, not data */
 #define EC_LPC_STATUS_LAST_CMD    0x08
-/* EC is in burst mode.  Unsupported by Chrome EC, so this bit is never set */
+/* EC is in burst mode */
 #define EC_LPC_STATUS_BURST_MODE  0x10
 /* SCI event is pending (requesting SCI query) */
 #define EC_LPC_STATUS_SCI_PENDING 0x20
@@ -2323,6 +2524,8 @@ struct ec_response_temp_sensor_get_info {
 /*****************************************************************************/
 /* Host event commands */
 
+
+/* Obsolete. New implementation should use EC_CMD_HOST_EVENT instead */
 /*
  * Host event mask params and response structures, shared by all of the host
  * event commands below.
@@ -2348,6 +2551,86 @@ struct ec_response_host_event_mask {
 #define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x008E
 #define EC_CMD_HOST_EVENT_CLEAR_B       0x008F
 
+/*
+ * Unified host event programming interface - Should be used by newer versions
+ * of BIOS/OS to program host events and masks
+ */
+
+struct ec_params_host_event {
+
+	/* Action requested by host - one of enum ec_host_event_action. */
+	uint8_t action;
+
+	/*
+	 * Mask type that the host requested the action on - one of
+	 * enum ec_host_event_mask_type.
+	 */
+	uint8_t mask_type;
+
+	/* Set to 0, ignore on read */
+	uint16_t reserved;
+
+	/* Value to be used in case of set operations. */
+	uint64_t value;
+} __ec_align4;
+
+/*
+ * Response structure returned by EC_CMD_HOST_EVENT.
+ * Update the value on a GET request. Set to 0 on GET/CLEAR
+ */
+
+struct ec_response_host_event {
+
+	/* Mask value in case of get operation */
+	uint64_t value;
+} __ec_align4;
+
+enum ec_host_event_action {
+	/*
+	 * params.value is ignored. Value of mask_type populated
+	 * in response.value
+	 */
+	EC_HOST_EVENT_GET,
+
+	/* Bits in params.value are set */
+	EC_HOST_EVENT_SET,
+
+	/* Bits in params.value are cleared */
+	EC_HOST_EVENT_CLEAR,
+};
+
+enum ec_host_event_mask_type {
+
+	/* Main host event copy */
+	EC_HOST_EVENT_MAIN,
+
+	/* Copy B of host events */
+	EC_HOST_EVENT_B,
+
+	/* SCI Mask */
+	EC_HOST_EVENT_SCI_MASK,
+
+	/* SMI Mask */
+	EC_HOST_EVENT_SMI_MASK,
+
+	/* Mask of events that should be always reported in hostevents */
+	EC_HOST_EVENT_ALWAYS_REPORT_MASK,
+
+	/* Active wake mask */
+	EC_HOST_EVENT_ACTIVE_WAKE_MASK,
+
+	/* Lazy wake mask for S0ix */
+	EC_HOST_EVENT_LAZY_WAKE_MASK_S0IX,
+
+	/* Lazy wake mask for S3 */
+	EC_HOST_EVENT_LAZY_WAKE_MASK_S3,
+
+	/* Lazy wake mask for S5 */
+	EC_HOST_EVENT_LAZY_WAKE_MASK_S5,
+};
+
+#define EC_CMD_HOST_EVENT       0x00A4
+
 /*****************************************************************************/
 /* Switch commands */
 
@@ -3056,122 +3339,6 @@ struct ec_params_reboot_ec {
  */
 #define EC_CMD_GET_PANIC_INFO 0x00D3
 
-/*****************************************************************************/
-/*
- * ACPI commands
- *
- * These are valid ONLY on the ACPI command/data port.
- */
-
-/*
- * ACPI Read Embedded Controller
- *
- * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
- *
- * Use the following sequence:
- *
- *    - Write EC_CMD_ACPI_READ to EC_LPC_ADDR_ACPI_CMD
- *    - Wait for EC_LPC_CMDR_PENDING bit to clear
- *    - Write address to EC_LPC_ADDR_ACPI_DATA
- *    - Wait for EC_LPC_CMDR_DATA bit to set
- *    - Read value from EC_LPC_ADDR_ACPI_DATA
- */
-#define EC_CMD_ACPI_READ 0x80
-
-/*
- * ACPI Write Embedded Controller
- *
- * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
- *
- * Use the following sequence:
- *
- *    - Write EC_CMD_ACPI_WRITE to EC_LPC_ADDR_ACPI_CMD
- *    - Wait for EC_LPC_CMDR_PENDING bit to clear
- *    - Write address to EC_LPC_ADDR_ACPI_DATA
- *    - Wait for EC_LPC_CMDR_PENDING bit to clear
- *    - Write value to EC_LPC_ADDR_ACPI_DATA
- */
-#define EC_CMD_ACPI_WRITE 0x81
-
-/*
- * ACPI Query Embedded Controller
- *
- * This clears the lowest-order bit in the currently pending host events, and
- * sets the result code to the 1-based index of the bit (event 0x00000001 = 1,
- * event 0x80000000 = 32), or 0 if no event was pending.
- */
-#define EC_CMD_ACPI_QUERY_EVENT 0x84
-
-/* Valid addresses in ACPI memory space, for read/write commands */
-
-/* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */
-#define EC_ACPI_MEM_VERSION            0x00
-/*
- * Test location; writing value here updates test compliment byte to (0xff -
- * value).
- */
-#define EC_ACPI_MEM_TEST               0x01
-/* Test compliment; writes here are ignored. */
-#define EC_ACPI_MEM_TEST_COMPLIMENT    0x02
-
-/* Keyboard backlight brightness percent (0 - 100) */
-#define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03
-/* DPTF Target Fan Duty (0-100, 0xff for auto/none) */
-#define EC_ACPI_MEM_FAN_DUTY           0x04
-
-/*
- * DPTF temp thresholds. Any of the EC's temp sensors can have up to two
- * independent thresholds attached to them. The current value of the ID
- * register determines which sensor is affected by the THRESHOLD and COMMIT
- * registers. The THRESHOLD register uses the same EC_TEMP_SENSOR_OFFSET scheme
- * as the memory-mapped sensors. The COMMIT register applies those settings.
- *
- * The spec does not mandate any way to read back the threshold settings
- * themselves, but when a threshold is crossed the AP needs a way to determine
- * which sensor(s) are responsible. Each reading of the ID register clears and
- * returns one sensor ID that has crossed one of its threshold (in either
- * direction) since the last read. A value of 0xFF means "no new thresholds
- * have tripped". Setting or enabling the thresholds for a sensor will clear
- * the unread event count for that sensor.
- */
-#define EC_ACPI_MEM_TEMP_ID            0x05
-#define EC_ACPI_MEM_TEMP_THRESHOLD     0x06
-#define EC_ACPI_MEM_TEMP_COMMIT        0x07
-/*
- * Here are the bits for the COMMIT register:
- *   bit 0 selects the threshold index for the chosen sensor (0/1)
- *   bit 1 enables/disables the selected threshold (0 = off, 1 = on)
- * Each write to the commit register affects one threshold.
- */
-#define EC_ACPI_MEM_TEMP_COMMIT_SELECT_MASK (1 << 0)
-#define EC_ACPI_MEM_TEMP_COMMIT_ENABLE_MASK (1 << 1)
-/*
- * Example:
- *
- * Set the thresholds for sensor 2 to 50 C and 60 C:
- *   write 2 to [0x05]      --  select temp sensor 2
- *   write 0x7b to [0x06]   --  C_TO_K(50) - EC_TEMP_SENSOR_OFFSET
- *   write 0x2 to [0x07]    --  enable threshold 0 with this value
- *   write 0x85 to [0x06]   --  C_TO_K(60) - EC_TEMP_SENSOR_OFFSET
- *   write 0x3 to [0x07]    --  enable threshold 1 with this value
- *
- * Disable the 60 C threshold, leaving the 50 C threshold unchanged:
- *   write 2 to [0x05]      --  select temp sensor 2
- *   write 0x1 to [0x07]    --  disable threshold 1
- */
-
-/* DPTF battery charging current limit */
-#define EC_ACPI_MEM_CHARGING_LIMIT     0x08
-
-/* Charging limit is specified in 64 mA steps */
-#define EC_ACPI_MEM_CHARGING_LIMIT_STEP_MA   64
-/* Value to disable DPTF battery charging limit */
-#define EC_ACPI_MEM_CHARGING_LIMIT_DISABLED  0xff
-
-/* Current version of ACPI memory address space */
-#define EC_ACPI_MEM_VERSION_CURRENT 1
-
-
 /*****************************************************************************/
 /*
  * HDMI CEC commands
@@ -3285,8 +3452,6 @@ enum mkbp_cec_event {
  */
 #define EC_CMD_VERSION0 0x00DC
 
-#endif  /* !__ACPI__ */
-
 /*****************************************************************************/
 /*
  * PD commands
@@ -3627,4 +3792,6 @@ struct ec_response_usb_pd_mux_info {
 #define EC_LPC_ADDR_OLD_PARAM   EC_HOST_CMD_REGION1
 #define EC_OLD_PARAM_SIZE       EC_HOST_CMD_REGION_SIZE
 
+
+
 #endif  /* __CROS_EC_COMMANDS_H */
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 08/30] mfd: cros_ec: move HDMI CEC API definition
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (6 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 07/30] mfd: cros_ec: Update ACPI interface definition Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 09/30] mfd: cros_ec: Remove zero-size structs Gwendal Grignou
                   ` (24 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Move near the end of file.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 148 ++++++++++++++-------------
 1 file changed, 75 insertions(+), 73 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 575066b90bab..d8bde2b5e9ce 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -3211,6 +3211,81 @@ struct ec_response_battery_vendor_param {
 } __ec_align4;
 
 /*****************************************************************************/
+/*
+ * HDMI CEC commands
+ *
+ * These commands are for sending and receiving message via HDMI CEC
+ */
+
+#define MAX_CEC_MSG_LEN 16
+
+/* CEC message from the AP to be written on the CEC bus */
+#define EC_CMD_CEC_WRITE_MSG 0x00B8
+
+/**
+ * struct ec_params_cec_write - Message to write to the CEC bus
+ * @msg: message content to write to the CEC bus
+ */
+struct ec_params_cec_write {
+	uint8_t msg[MAX_CEC_MSG_LEN];
+} __ec_align1;
+
+/* Set various CEC parameters */
+#define EC_CMD_CEC_SET 0x00BA
+
+/**
+ * struct ec_params_cec_set - CEC parameters set
+ * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS
+ * @val: in case cmd is CEC_CMD_ENABLE, this field can be 0 to disable CEC
+ *	or 1 to enable CEC functionality, in case cmd is
+ *	CEC_CMD_LOGICAL_ADDRESS, this field encodes the requested logical
+ *	address between 0 and 15 or 0xff to unregister
+ */
+struct ec_params_cec_set {
+	uint8_t cmd; /* enum cec_command */
+	uint8_t val;
+} __ec_align1;
+
+/* Read various CEC parameters */
+#define EC_CMD_CEC_GET 0x00BB
+
+/**
+ * struct ec_params_cec_get - CEC parameters get
+ * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS
+ */
+struct ec_params_cec_get {
+	uint8_t cmd; /* enum cec_command */
+} __ec_align1;
+
+/**
+ * struct ec_response_cec_get - CEC parameters get response
+ * @val: in case cmd was CEC_CMD_ENABLE, this field will 0 if CEC is
+ *	disabled or 1 if CEC functionality is enabled,
+ *	in case cmd was CEC_CMD_LOGICAL_ADDRESS, this will encode the
+ *	configured logical address between 0 and 15 or 0xff if unregistered
+ */
+struct ec_response_cec_get {
+	uint8_t val;
+} __ec_align1;
+
+/* CEC parameters command */
+enum cec_command {
+	/* CEC reading, writing and events enable */
+	CEC_CMD_ENABLE,
+	/* CEC logical address  */
+	CEC_CMD_LOGICAL_ADDRESS,
+};
+
+/* Events from CEC to AP */
+enum mkbp_cec_event {
+	/* Outgoing message was acknowledged by a follower */
+	EC_MKBP_CEC_SEND_OK			= BIT(0),
+	/* Outgoing message was not acknowledged */
+	EC_MKBP_CEC_SEND_FAILED			= BIT(1),
+};
+
+/*****************************************************************************/
+
 /* Commands for I2S recording on audio codec. */
 
 #define EC_CMD_CODEC_I2S 0x00BC
@@ -3339,79 +3414,6 @@ struct ec_params_reboot_ec {
  */
 #define EC_CMD_GET_PANIC_INFO 0x00D3
 
-/*****************************************************************************/
-/*
- * HDMI CEC commands
- *
- * These commands are for sending and receiving message via HDMI CEC
- */
-#define EC_MAX_CEC_MSG_LEN 16
-
-/* CEC message from the AP to be written on the CEC bus */
-#define EC_CMD_CEC_WRITE_MSG 0x00B8
-
-/**
- * struct ec_params_cec_write - Message to write to the CEC bus
- * @msg: message content to write to the CEC bus
- */
-struct ec_params_cec_write {
-	uint8_t msg[EC_MAX_CEC_MSG_LEN];
-} __ec_align1;
-
-/* Set various CEC parameters */
-#define EC_CMD_CEC_SET 0x00BA
-
-/**
- * struct ec_params_cec_set - CEC parameters set
- * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS
- * @val: in case cmd is CEC_CMD_ENABLE, this field can be 0 to disable CEC
- *	or 1 to enable CEC functionality, in case cmd is CEC_CMD_LOGICAL_ADDRESS,
- *	this field encodes the requested logical address between 0 and 15
- *	or 0xff to unregister
- */
-struct ec_params_cec_set {
-	uint8_t cmd; /* enum cec_command */
-	uint8_t val;
-} __ec_align1;
-
-/* Read various CEC parameters */
-#define EC_CMD_CEC_GET 0x00BB
-
-/**
- * struct ec_params_cec_get - CEC parameters get
- * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS
- */
-struct ec_params_cec_get {
-	uint8_t cmd; /* enum cec_command */
-} __ec_align1;
-
-/**
- * struct ec_response_cec_get - CEC parameters get response
- * @val: in case cmd was CEC_CMD_ENABLE, this field will 0 if CEC is
- *	disabled or 1 if CEC functionality is enabled,
- *	in case cmd was CEC_CMD_LOGICAL_ADDRESS, this will encode the
- *	configured logical address between 0 and 15 or 0xff if unregistered
- */
-struct ec_response_cec_get {
-	uint8_t val;
-} __ec_align1;
-
-/* CEC parameters command */
-enum ec_cec_command {
-	/* CEC reading, writing and events enable */
-	CEC_CMD_ENABLE,
-	/* CEC logical address  */
-	CEC_CMD_LOGICAL_ADDRESS,
-};
-
-/* Events from CEC to AP */
-enum mkbp_cec_event {
-	/* Outgoing message was acknowledged by a follower */
-	EC_MKBP_CEC_SEND_OK			= BIT(0),
-	/* Outgoing message was not acknowledged */
-	EC_MKBP_CEC_SEND_FAILED			= BIT(1),
-};
-
 /*****************************************************************************/
 /*
  * Special commands
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 09/30] mfd: cros_ec: Remove zero-size structs
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (7 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 08/30] mfd: cros_ec: move HDMI CEC API definition Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 10/30] mfd: cros_ec: Add Flash V2 commands API Gwendal Grignou
                   ` (23 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Empty structure size is different between C and C++.
To prevent clang warning when compiling this include file in C++
programs, remove empty structures.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 33 +++++++++++++++-------------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index d8bde2b5e9ce..fabf341af97f 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1540,10 +1540,14 @@ struct lightbar_program {
 struct ec_params_lightbar {
 	uint8_t cmd;		      /* Command (see enum lightbar_command) */
 	union {
-		struct {
-			/* no args */
-		} dump, off, on, init, get_seq, get_params_v0, get_params_v1,
-			version, get_brightness, get_demo, suspend, resume;
+		/*
+		 * The following commands have no args:
+		 *
+		 * dump, off, on, init, get_seq, get_params_v0, get_params_v1,
+		 * version, get_brightness, get_demo, suspend, resume
+		 *
+		 * Don't use an empty struct, because C++ hates that.
+		 */
 
 		struct __ec_todo_unpacked {
 			uint8_t num;
@@ -1597,11 +1601,13 @@ struct ec_response_lightbar {
 			uint8_t red, green, blue;
 		} get_rgb;
 
-		struct {
-			/* no return params */
-		} off, on, init, set_brightness, seq, reg, set_rgb,
-			demo, set_params_v0, set_params_v1,
-			set_program, manual_suspend_ctrl, suspend, resume;
+		/*
+		 * The following commands have no response:
+		 *
+		 * off, on, init, set_brightness, seq, reg, set_rgb,
+		 * set_params_v0, set_params_v1, set_program,
+		 * manual_suspend_ctrl, suspend, resume
+		 */
 	};
 } __ec_todo_packed;
 
@@ -3021,9 +3027,7 @@ enum charge_state_params {
 struct ec_params_charge_state {
 	uint8_t cmd;				/* enum charge_state_command */
 	union {
-		struct {
-			/* no args */
-		} get_state;
+		/* get_state has no args */
 
 		struct __ec_todo_unpacked {
 			uint32_t param;		/* enum charge_state_param */
@@ -3049,9 +3053,8 @@ struct ec_response_charge_state {
 		struct __ec_align4 {
 			uint32_t value;
 		} get_param;
-		struct {
-			/* no return values */
-		} set_param;
+
+		/* set_param returns no args */
 	};
 } __ec_align4;
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 10/30] mfd: cros_ec: Add Flash V2 commands API
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (8 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 09/30] mfd: cros_ec: Remove zero-size structs Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 11/30] mfd: cros_ec: Add PWM_SET_DUTY API Gwendal Grignou
                   ` (22 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Added for supporting larger embedded controller flash.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 150 ++++++++++++++++++++++++++-
 1 file changed, 147 insertions(+), 3 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index fabf341af97f..3d1d26f62bd3 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1138,6 +1138,7 @@ struct ec_response_get_features {
 
 /* Get flash info */
 #define EC_CMD_FLASH_INFO 0x0010
+#define EC_VER_FLASH_INFO 2
 
 /**
  * struct ec_response_flash_info - Response to the flash info command.
@@ -1164,6 +1165,15 @@ struct ec_response_flash_info {
  */
 #define EC_FLASH_INFO_ERASE_TO_0 BIT(0)
 
+/*
+ * Flash must be selected for read/write/erase operations to succeed.  This may
+ * be necessary on a chip where write/erase can be corrupted by other board
+ * activity, or where the chip needs to enable some sort of programming voltage,
+ * or where the read/write/erase operations require cleanly suspending other
+ * chip functionality.
+ */
+#define EC_FLASH_INFO_SELECT_REQUIRED BIT(1)
+
 /**
  * struct ec_response_flash_info_1 - Response to the flash info v1 command.
  * @flash_size: Usable flash size in bytes.
@@ -1186,6 +1196,12 @@ struct ec_response_flash_info {
  * gcc anonymous structs don't seem to get along with the __packed directive;
  * if they did we'd define the version 0 structure as a sub-structure of this
  * one.
+ *
+ * Version 2 supports flash banks of different sizes:
+ * The caller specified the number of banks it has preallocated
+ * (num_banks_desc)
+ * The EC returns the number of banks describing the flash memory.
+ * It adds banks descriptions up to num_banks_desc.
  */
 struct ec_response_flash_info_1 {
 	/* Version 0 fields; see above for description */
@@ -1199,6 +1215,42 @@ struct ec_response_flash_info_1 {
 	uint32_t flags;
 } __ec_align4;
 
+struct ec_params_flash_info_2 {
+	/* Number of banks to describe */
+	uint16_t num_banks_desc;
+	/* Reserved; set 0; ignore on read */
+	uint8_t reserved[2];
+} __ec_align4;
+
+struct ec_flash_bank {
+	/* Number of sector is in this bank. */
+	uint16_t count;
+	/* Size in power of 2 of each sector (8 --> 256 bytes) */
+	uint8_t size_exp;
+	/* Minimal write size for the sectors in this bank */
+	uint8_t write_size_exp;
+	/* Erase size for the sectors in this bank */
+	uint8_t erase_size_exp;
+	/* Size for write protection, usually identical to erase size. */
+	uint8_t protect_size_exp;
+	/* Reserved; set 0; ignore on read */
+	uint8_t reserved[2];
+};
+
+struct ec_response_flash_info_2 {
+	/* Total flash in the EC. */
+	uint32_t flash_size;
+	/* Flags; see EC_FLASH_INFO_* */
+	uint32_t flags;
+	/* Maximum size to use to send data to write to the EC. */
+	uint32_t write_ideal_size;
+	/* Number of banks present in the EC. */
+	uint16_t num_banks_total;
+	/* Number of banks described in banks array. */
+	uint16_t num_banks_desc;
+	struct ec_flash_bank banks[0];
+} __ec_align4;
+
 /*
  * Read flash
  *
@@ -1238,7 +1290,7 @@ struct ec_params_flash_write {
 #define EC_CMD_FLASH_ERASE 0x0013
 
 /**
- * struct ec_params_flash_erase - Parameters for the flash erase command.
+ * struct ec_params_flash_erase - Parameters for the flash erase command, v0.
  * @offset: Byte offset to erase.
  * @size: Size to erase in bytes.
  */
@@ -1247,6 +1299,43 @@ struct ec_params_flash_erase {
 	uint32_t size;
 } __ec_align4;
 
+/*
+ * v1 add async erase:
+ * subcommands can returns:
+ * EC_RES_SUCCESS : erased (see ERASE_SECTOR_ASYNC case below).
+ * EC_RES_INVALID_PARAM : offset/size are not aligned on a erase boundary.
+ * EC_RES_ERROR : other errors.
+ * EC_RES_BUSY : an existing erase operation is in progress.
+ * EC_RES_ACCESS_DENIED: Trying to erase running image.
+ *
+ * When ERASE_SECTOR_ASYNC returns EC_RES_SUCCESS, the operation is just
+ * properly queued. The user must call ERASE_GET_RESULT subcommand to get
+ * the proper result.
+ * When ERASE_GET_RESULT returns EC_RES_BUSY, the caller must wait and send
+ * ERASE_GET_RESULT again to get the result of ERASE_SECTOR_ASYNC.
+ * ERASE_GET_RESULT command may timeout on EC where flash access is not
+ * permitted while erasing. (For instance, STM32F4).
+ */
+enum ec_flash_erase_cmd {
+	FLASH_ERASE_SECTOR,     /* Erase and wait for result */
+	FLASH_ERASE_SECTOR_ASYNC,  /* Erase and return immediately. */
+	FLASH_ERASE_GET_RESULT,  /* Ask for last erase result */
+};
+
+/**
+ * struct ec_params_flash_erase_v1 - Parameters for the flash erase command, v1.
+ * @cmd: One of ec_flash_erase_cmd.
+ * @reserved: Pad byte; currently always contains 0.
+ * @flag: No flags defined yet; set to 0.
+ * @params: Same as v0 parameters.
+ */
+struct ec_params_flash_erase_v1 {
+	uint8_t  cmd;
+	uint8_t  reserved;
+	uint16_t flag;
+	struct ec_params_flash_erase params;
+} __ec_align4;
+
 /*
  * Get/set flash protection.
  *
@@ -1282,6 +1371,15 @@ struct ec_params_flash_erase {
 #define EC_FLASH_PROTECT_ERROR_INCONSISTENT BIT(5)
 /* Entire flash code protected when the EC boots */
 #define EC_FLASH_PROTECT_ALL_AT_BOOT        BIT(6)
+/* RW flash code protected when the EC boots */
+#define EC_FLASH_PROTECT_RW_AT_BOOT         BIT(7)
+/* RW flash code protected now. */
+#define EC_FLASH_PROTECT_RW_NOW             BIT(8)
+/* Rollback information flash region protected when the EC boots */
+#define EC_FLASH_PROTECT_ROLLBACK_AT_BOOT   BIT(9)
+/* Rollback information flash region protected now */
+#define EC_FLASH_PROTECT_ROLLBACK_NOW       BIT(10)
+
 
 /**
  * struct ec_params_flash_protect - Parameters for the flash protect command.
@@ -1320,16 +1418,31 @@ struct ec_response_flash_protect {
 enum ec_flash_region {
 	/* Region which holds read-only EC image */
 	EC_FLASH_REGION_RO = 0,
-	/* Region which holds rewritable EC image */
-	EC_FLASH_REGION_RW,
+	/*
+	 * Region which holds active RW image. 'Active' is different from
+	 * 'running'. Active means 'scheduled-to-run'. Since RO image always
+	 * scheduled to run, active/non-active applies only to RW images (for
+	 * the same reason 'update' applies only to RW images. It's a state of
+	 * an image on a flash. Running image can be RO, RW_A, RW_B but active
+	 * image can only be RW_A or RW_B. In recovery mode, an active RW image
+	 * doesn't enter 'running' state but it's still active on a flash.
+	 */
+	EC_FLASH_REGION_ACTIVE,
 	/*
 	 * Region which should be write-protected in the factory (a superset of
 	 * EC_FLASH_REGION_RO)
 	 */
 	EC_FLASH_REGION_WP_RO,
+	/* Region which holds updatable (non-active) RW image */
+	EC_FLASH_REGION_UPDATE,
 	/* Number of regions */
 	EC_FLASH_REGION_COUNT,
 };
+/*
+ * 'RW' is vague if there are multiple RW images; we mean the active one,
+ * so the old constant is deprecated.
+ */
+#define EC_FLASH_REGION_RW EC_FLASH_REGION_ACTIVE
 
 /**
  * struct ec_params_flash_region_info - Parameters for the flash region info
@@ -1364,6 +1477,37 @@ struct ec_response_vbnvcontext {
 	uint8_t block[EC_VBNV_BLOCK_SIZE];
 } __ec_align4;
 
+
+/* Get SPI flash information */
+#define EC_CMD_FLASH_SPI_INFO 0x0018
+
+struct ec_response_flash_spi_info {
+	/* JEDEC info from command 0x9F (manufacturer, memory type, size) */
+	uint8_t jedec[3];
+
+	/* Pad byte; currently always contains 0 */
+	uint8_t reserved0;
+
+	/* Manufacturer / device ID from command 0x90 */
+	uint8_t mfr_dev_id[2];
+
+	/* Status registers from command 0x05 and 0x35 */
+	uint8_t sr1, sr2;
+} __ec_align1;
+
+
+/* Select flash during flash operations */
+#define EC_CMD_FLASH_SELECT 0x0019
+
+/**
+ * struct ec_params_flash_select - Parameters for the flash select command.
+ * @select: 1 to select flash, 0 to deselect flash
+ */
+struct ec_params_flash_select {
+	uint8_t select;
+} __ec_align4;
+
+
 /*****************************************************************************/
 /* PWM commands */
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 11/30] mfd: cros_ec: Add PWM_SET_DUTY API
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (9 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 10/30] mfd: cros_ec: Add Flash V2 commands API Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 12/30] mfd: cros_ec: Add lightbar v2 API Gwendal Grignou
                   ` (21 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Add API for fan control.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 3d1d26f62bd3..2b3a94a4f0f4 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1521,11 +1521,19 @@ struct ec_response_pwm_get_fan_rpm {
 /* Set target fan RPM */
 #define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x0021
 
-struct ec_params_pwm_set_fan_target_rpm {
+/* Version 0 of input params */
+struct ec_params_pwm_set_fan_target_rpm_v0 {
 	uint32_t rpm;
+} __ec_align4;
+
+/* Version 1 of input params */
+struct ec_params_pwm_set_fan_target_rpm_v1 {
+	uint32_t rpm;
+	uint8_t fan_idx;
 } __ec_align_size1;
 
 /* Get keyboard backlight */
+/* OBSOLETE - Use EC_CMD_PWM_SET_DUTY */
 #define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x0022
 
 struct ec_response_pwm_get_keyboard_backlight {
@@ -1534,6 +1542,7 @@ struct ec_response_pwm_get_keyboard_backlight {
 } __ec_align1;
 
 /* Set keyboard backlight */
+/* OBSOLETE - Use EC_CMD_PWM_SET_DUTY */
 #define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x0023
 
 struct ec_params_pwm_set_keyboard_backlight {
@@ -1543,10 +1552,17 @@ struct ec_params_pwm_set_keyboard_backlight {
 /* Set target fan PWM duty cycle */
 #define EC_CMD_PWM_SET_FAN_DUTY 0x0024
 
-struct ec_params_pwm_set_fan_duty {
+/* Version 0 of input params */
+struct ec_params_pwm_set_fan_duty_v0 {
 	uint32_t percent;
 } __ec_align4;
 
+/* Version 1 of input params */
+struct ec_params_pwm_set_fan_duty_v1 {
+	uint32_t percent;
+	uint8_t fan_idx;
+} __ec_align_size1;
+
 #define EC_CMD_PWM_SET_DUTY 0x0025
 /* 16 bit duty cycle, 0xffff = 100% */
 #define EC_PWM_MAX_DUTY 0xffff
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 12/30] mfd: cros_ec: Add lightbar v2 API
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (10 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 11/30] mfd: cros_ec: Add PWM_SET_DUTY API Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 13/30] mfd: cros_ec: Expand hash API Gwendal Grignou
                   ` (20 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

New API split commands, improve EC command latency.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 124 ++++++++++++++++++++++++++-
 1 file changed, 120 insertions(+), 4 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 2b3a94a4f0f4..0ff1941288cf 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1658,7 +1658,10 @@ struct lightbar_params_v1 {
 	int32_t s3_sleep_for;
 	int32_t s3_ramp_up;
 	int32_t s3_ramp_down;
+	int32_t s5_ramp_up;
+	int32_t s5_ramp_down;
 	int32_t tap_tick_delay;
+	int32_t tap_gate_delay;
 	int32_t tap_display_time;
 
 	/* Tap-for-battery params */
@@ -1686,11 +1689,82 @@ struct lightbar_params_v1 {
 	uint8_t s0_idx[2][LB_BATTERY_LEVELS];	/* AP is running */
 	uint8_t s3_idx[2][LB_BATTERY_LEVELS];	/* AP is sleeping */
 
+	/* s5: single color pulse on inhibited power-up */
+	uint8_t s5_idx;
+
 	/* Color palette */
 	struct rgb_s color[8];			/* 0-3 are Google colors */
 } __ec_todo_packed;
 
-/* Lightbar program */
+/* Lightbar command params v2
+ * crbug.com/467716
+ *
+ * lightbar_parms_v1 was too big for i2c, therefore in v2, we split them up by
+ * logical groups to make it more manageable ( < 120 bytes).
+ *
+ * NOTE: Each of these groups must be less than 120 bytes.
+ */
+
+struct lightbar_params_v2_timing {
+	/* Timing */
+	int32_t google_ramp_up;
+	int32_t google_ramp_down;
+	int32_t s3s0_ramp_up;
+	int32_t s0_tick_delay[2];		/* AC=0/1 */
+	int32_t s0a_tick_delay[2];		/* AC=0/1 */
+	int32_t s0s3_ramp_down;
+	int32_t s3_sleep_for;
+	int32_t s3_ramp_up;
+	int32_t s3_ramp_down;
+	int32_t s5_ramp_up;
+	int32_t s5_ramp_down;
+	int32_t tap_tick_delay;
+	int32_t tap_gate_delay;
+	int32_t tap_display_time;
+} __ec_todo_packed;
+
+struct lightbar_params_v2_tap {
+	/* Tap-for-battery params */
+	uint8_t tap_pct_red;
+	uint8_t tap_pct_green;
+	uint8_t tap_seg_min_on;
+	uint8_t tap_seg_max_on;
+	uint8_t tap_seg_osc;
+	uint8_t tap_idx[3];
+} __ec_todo_packed;
+
+struct lightbar_params_v2_oscillation {
+	/* Oscillation */
+	uint8_t osc_min[2];			/* AC=0/1 */
+	uint8_t osc_max[2];			/* AC=0/1 */
+	uint8_t w_ofs[2];			/* AC=0/1 */
+} __ec_todo_packed;
+
+struct lightbar_params_v2_brightness {
+	/* Brightness limits based on the backlight and AC. */
+	uint8_t bright_bl_off_fixed[2];		/* AC=0/1 */
+	uint8_t bright_bl_on_min[2];		/* AC=0/1 */
+	uint8_t bright_bl_on_max[2];		/* AC=0/1 */
+} __ec_todo_packed;
+
+struct lightbar_params_v2_thresholds {
+	/* Battery level thresholds */
+	uint8_t battery_threshold[LB_BATTERY_LEVELS - 1];
+} __ec_todo_packed;
+
+struct lightbar_params_v2_colors {
+	/* Map [AC][battery_level] to color index */
+	uint8_t s0_idx[2][LB_BATTERY_LEVELS];	/* AP is running */
+	uint8_t s3_idx[2][LB_BATTERY_LEVELS];	/* AP is sleeping */
+
+	/* s5: single color pulse on inhibited power-up */
+	uint8_t s5_idx;
+
+	/* Color palette */
+	struct rgb_s color[8];			/* 0-3 are Google colors */
+} __ec_todo_packed;
+
+/* Lightbar program. */
 #define EC_LB_PROG_LEN 192
 struct lightbar_program {
 	uint8_t size;
@@ -1704,7 +1778,10 @@ struct ec_params_lightbar {
 		 * The following commands have no args:
 		 *
 		 * dump, off, on, init, get_seq, get_params_v0, get_params_v1,
-		 * version, get_brightness, get_demo, suspend, resume
+		 * version, get_brightness, get_demo, suspend, resume,
+		 * get_params_v2_timing, get_params_v2_tap, get_params_v2_osc,
+		 * get_params_v2_bright, get_params_v2_thlds,
+		 * get_params_v2_colors
 		 *
 		 * Don't use an empty struct, because C++ hates that.
 		 */
@@ -1731,6 +1808,14 @@ struct ec_params_lightbar {
 
 		struct lightbar_params_v0 set_params_v0;
 		struct lightbar_params_v1 set_params_v1;
+
+		struct lightbar_params_v2_timing set_v2par_timing;
+		struct lightbar_params_v2_tap set_v2par_tap;
+		struct lightbar_params_v2_oscillation set_v2par_osc;
+		struct lightbar_params_v2_brightness set_v2par_bright;
+		struct lightbar_params_v2_thresholds set_v2par_thlds;
+		struct lightbar_params_v2_colors set_v2par_colors;
+
 		struct lightbar_program set_program;
 	};
 } __ec_todo_packed;
@@ -1752,6 +1837,14 @@ struct ec_response_lightbar {
 		struct lightbar_params_v0 get_params_v0;
 		struct lightbar_params_v1 get_params_v1;
 
+
+		struct lightbar_params_v2_timing get_params_v2_timing;
+		struct lightbar_params_v2_tap get_params_v2_tap;
+		struct lightbar_params_v2_oscillation get_params_v2_osc;
+		struct lightbar_params_v2_brightness get_params_v2_bright;
+		struct lightbar_params_v2_thresholds get_params_v2_thlds;
+		struct lightbar_params_v2_colors get_params_v2_colors;
+
 		struct __ec_todo_unpacked {
 			uint32_t num;
 			uint32_t flags;
@@ -1764,9 +1857,11 @@ struct ec_response_lightbar {
 		/*
 		 * The following commands have no response:
 		 *
-		 * off, on, init, set_brightness, seq, reg, set_rgb,
+		 * off, on, init, set_brightness, seq, reg, set_rgb, demo,
 		 * set_params_v0, set_params_v1, set_program,
-		 * manual_suspend_ctrl, suspend, resume
+		 * manual_suspend_ctrl, suspend, resume, set_v2par_timing,
+		 * set_v2par_tap, set_v2par_osc, set_v2par_bright,
+		 * set_v2par_thlds, set_v2par_colors
 		 */
 	};
 } __ec_todo_packed;
@@ -1795,6 +1890,18 @@ enum lightbar_command {
 	LIGHTBAR_CMD_MANUAL_SUSPEND_CTRL = 19,
 	LIGHTBAR_CMD_SUSPEND = 20,
 	LIGHTBAR_CMD_RESUME = 21,
+	LIGHTBAR_CMD_GET_PARAMS_V2_TIMING = 22,
+	LIGHTBAR_CMD_SET_PARAMS_V2_TIMING = 23,
+	LIGHTBAR_CMD_GET_PARAMS_V2_TAP = 24,
+	LIGHTBAR_CMD_SET_PARAMS_V2_TAP = 25,
+	LIGHTBAR_CMD_GET_PARAMS_V2_OSCILLATION = 26,
+	LIGHTBAR_CMD_SET_PARAMS_V2_OSCILLATION = 27,
+	LIGHTBAR_CMD_GET_PARAMS_V2_BRIGHTNESS = 28,
+	LIGHTBAR_CMD_SET_PARAMS_V2_BRIGHTNESS = 29,
+	LIGHTBAR_CMD_GET_PARAMS_V2_THRESHOLDS = 30,
+	LIGHTBAR_CMD_SET_PARAMS_V2_THRESHOLDS = 31,
+	LIGHTBAR_CMD_GET_PARAMS_V2_COLORS = 32,
+	LIGHTBAR_CMD_SET_PARAMS_V2_COLORS = 33,
 	LIGHTBAR_NUM_CMDS
 };
 
@@ -1813,6 +1920,14 @@ enum ec_led_id {
 	EC_LED_ID_POWER_LED,
 	/* LED on power adapter or its plug */
 	EC_LED_ID_ADAPTER_LED,
+	/* LED to indicate left side */
+	EC_LED_ID_LEFT_LED,
+	/* LED to indicate right side */
+	EC_LED_ID_RIGHT_LED,
+	/* LED to indicate recovery mode with HW_REINIT */
+	EC_LED_ID_RECOVERY_HW_REINIT_LED,
+	/* LED to indicate sysrq debug mode. */
+	EC_LED_ID_SYSRQ_DEBUG_LED,
 
 	EC_LED_ID_COUNT
 };
@@ -1827,6 +1942,7 @@ enum ec_led_colors {
 	EC_LED_COLOR_BLUE,
 	EC_LED_COLOR_YELLOW,
 	EC_LED_COLOR_WHITE,
+	EC_LED_COLOR_AMBER,
 
 	EC_LED_COLOR_COUNT
 };
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 13/30] mfd: cros_ec: Expand hash API
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (11 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 12/30] mfd: cros_ec: Add lightbar v2 API Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 14/30] mfd: cros_ec: Add EC transport protocol v4 Gwendal Grignou
                   ` (19 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Improve API to verify EC image signature.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 0ff1941288cf..76943e64998a 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -2018,8 +2018,15 @@ enum ec_vboot_hash_status {
  * If one of these is specified, the EC will automatically update offset and
  * size to the correct values for the specified image (RO or RW).
  */
-#define EC_VBOOT_HASH_OFFSET_RO 0xfffffffe
-#define EC_VBOOT_HASH_OFFSET_RW 0xfffffffd
+#define EC_VBOOT_HASH_OFFSET_RO		0xfffffffe
+#define EC_VBOOT_HASH_OFFSET_ACTIVE	0xfffffffd
+#define EC_VBOOT_HASH_OFFSET_UPDATE	0xfffffffc
+
+/*
+ * 'RW' is vague if there are multiple RW images; we mean the active one,
+ * so the old constant is deprecated.
+ */
+#define EC_VBOOT_HASH_OFFSET_RW EC_VBOOT_HASH_OFFSET_ACTIVE
 
 /*****************************************************************************/
 /*
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 14/30] mfd: cros_ec: Add EC transport protocol v4
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (12 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 13/30] mfd: cros_ec: Expand hash API Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 15/30] mfd: cros_ec: Complete MEMS sensor API Gwendal Grignou
                   ` (18 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Introduce a new transport procotol between EC and host.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 143 ++++++++++++++++++++++++++-
 1 file changed, 141 insertions(+), 2 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 76943e64998a..40a8069a58e8 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -455,7 +455,10 @@
 #define EC_LPC_STATUS_BUSY_MASK \
 	(EC_LPC_STATUS_FROM_HOST | EC_LPC_STATUS_PROCESSING)
 
-/* Host command response codes */
+/*
+ * Host command response codes (16-bit).  Note that response codes should be
+ * stored in a uint16_t rather than directly in a value of this type.
+ */
 enum ec_status {
 	EC_RES_SUCCESS = 0,
 	EC_RES_INVALID_COMMAND = 1,
@@ -471,7 +474,13 @@ enum ec_status {
 	EC_RES_OVERFLOW = 11,		/* Table / data overflow */
 	EC_RES_INVALID_HEADER = 12,     /* Header contains invalid data */
 	EC_RES_REQUEST_TRUNCATED = 13,  /* Didn't get the entire request */
-	EC_RES_RESPONSE_TOO_BIG = 14    /* Response was too big to handle */
+	EC_RES_RESPONSE_TOO_BIG = 14,   /* Response was too big to handle */
+	EC_RES_BUS_ERROR = 15,		/* Communications bus error */
+	EC_RES_BUSY = 16,		/* Up but too busy.  Should retry */
+	EC_RES_INVALID_HEADER_VERSION = 17,  /* Header version invalid */
+	EC_RES_INVALID_HEADER_CRC = 18,      /* Header CRC invalid */
+	EC_RES_INVALID_DATA_CRC = 19,        /* Data CRC invalid */
+	EC_RES_DUP_UNAVAILABLE = 20,         /* Can't resend response */
 };
 
 /*
@@ -744,6 +753,136 @@ struct ec_host_response {
 	uint16_t reserved;
 } __ec_align4;
 
+/*****************************************************************************/
+
+/*
+ * Host command protocol V4.
+ *
+ * Packets always start with a request or response header.  They are followed
+ * by data_len bytes of data.  If the data_crc_present flag is set, the data
+ * bytes are followed by a CRC-8 of that data, using using x^8 + x^2 + x + 1
+ * polynomial.
+ *
+ * Host algorithm when sending a request q:
+ *
+ * 101) tries_left=(some value, e.g. 3);
+ * 102) q.seq_num++
+ * 103) q.seq_dup=0
+ * 104) Calculate q.header_crc.
+ * 105) Send request q to EC.
+ * 106) Wait for response r.  Go to 201 if received or 301 if timeout.
+ *
+ * 201) If r.struct_version != 4, go to 301.
+ * 202) If r.header_crc mismatches calculated CRC for r header, go to 301.
+ * 203) If r.data_crc_present and r.data_crc mismatches, go to 301.
+ * 204) If r.seq_num != q.seq_num, go to 301.
+ * 205) If r.seq_dup == q.seq_dup, return success.
+ * 207) If r.seq_dup == 1, go to 301.
+ * 208) Return error.
+ *
+ * 301) If --tries_left <= 0, return error.
+ * 302) If q.seq_dup == 1, go to 105.
+ * 303) q.seq_dup = 1
+ * 304) Go to 104.
+ *
+ * EC algorithm when receiving a request q.
+ * EC has response buffer r, error buffer e.
+ *
+ * 101) If q.struct_version != 4, set e.result = EC_RES_INVALID_HEADER_VERSION
+ *      and go to 301
+ * 102) If q.header_crc mismatches calculated CRC, set e.result =
+ *      EC_RES_INVALID_HEADER_CRC and go to 301
+ * 103) If q.data_crc_present, calculate data CRC.  If that mismatches the CRC
+ *      byte at the end of the packet, set e.result = EC_RES_INVALID_DATA_CRC
+ *      and go to 301.
+ * 104) If q.seq_dup == 0, go to 201.
+ * 105) If q.seq_num != r.seq_num, go to 201.
+ * 106) If q.seq_dup == r.seq_dup, go to 205, else go to 203.
+ *
+ * 201) Process request q into response r.
+ * 202) r.seq_num = q.seq_num
+ * 203) r.seq_dup = q.seq_dup
+ * 204) Calculate r.header_crc
+ * 205) If r.data_len > 0 and data is no longer available, set e.result =
+ *      EC_RES_DUP_UNAVAILABLE and go to 301.
+ * 206) Send response r.
+ *
+ * 301) e.seq_num = q.seq_num
+ * 302) e.seq_dup = q.seq_dup
+ * 303) Calculate e.header_crc.
+ * 304) Send error response e.
+ */
+
+/* Version 4 request from host */
+struct ec_host_request4 {
+	/*
+	 * bits 0-3: struct_version: Structure version (=4)
+	 * bit    4: is_response: Is response (=0)
+	 * bits 5-6: seq_num: Sequence number
+	 * bit    7: seq_dup: Sequence duplicate flag
+	 */
+	uint8_t fields0;
+
+	/*
+	 * bits 0-4: command_version: Command version
+	 * bits 5-6: Reserved (set 0, ignore on read)
+	 * bit    7: data_crc_present: Is data CRC present after data
+	 */
+	uint8_t fields1;
+
+	/* Command code (EC_CMD_*) */
+	uint16_t command;
+
+	/* Length of data which follows this header (not including data CRC) */
+	uint16_t data_len;
+
+	/* Reserved (set 0, ignore on read) */
+	uint8_t reserved;
+
+	/* CRC-8 of above fields, using x^8 + x^2 + x + 1 polynomial */
+	uint8_t header_crc;
+} __ec_align4;
+
+/* Version 4 response from EC */
+struct ec_host_response4 {
+	/*
+	 * bits 0-3: struct_version: Structure version (=4)
+	 * bit    4: is_response: Is response (=1)
+	 * bits 5-6: seq_num: Sequence number
+	 * bit    7: seq_dup: Sequence duplicate flag
+	 */
+	uint8_t fields0;
+
+	/*
+	 * bits 0-6: Reserved (set 0, ignore on read)
+	 * bit    7: data_crc_present: Is data CRC present after data
+	 */
+	uint8_t fields1;
+
+	/* Result code (EC_RES_*) */
+	uint16_t result;
+
+	/* Length of data which follows this header (not including data CRC) */
+	uint16_t data_len;
+
+	/* Reserved (set 0, ignore on read) */
+	uint8_t reserved;
+
+	/* CRC-8 of above fields, using x^8 + x^2 + x + 1 polynomial */
+	uint8_t header_crc;
+} __ec_align4;
+
+/* Fields in fields0 byte */
+#define EC_PACKET4_0_STRUCT_VERSION_MASK	0x0f
+#define EC_PACKET4_0_IS_RESPONSE_MASK		0x10
+#define EC_PACKET4_0_SEQ_NUM_SHIFT		5
+#define EC_PACKET4_0_SEQ_NUM_MASK		0x60
+#define EC_PACKET4_0_SEQ_DUP_MASK		0x80
+
+/* Fields in fields1 byte */
+#define EC_PACKET4_1_COMMAND_VERSION_MASK	0x1f  /* (request only) */
+#define EC_PACKET4_1_DATA_CRC_PRESENT_MASK	0x80
+
 /*****************************************************************************/
 /*
  * Notes on commands:
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 15/30] mfd: cros_ec: Complete MEMS sensor API
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (13 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 14/30] mfd: cros_ec: Add EC transport protocol v4 Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 16/30] mfd: cros_ec: Fix event processing API Gwendal Grignou
                   ` (17 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Add new command for batched mode, add support for more sensors.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 464 +++++++++++++++++++++++----
 1 file changed, 406 insertions(+), 58 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 40a8069a58e8..701b03cfa445 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -2191,7 +2191,13 @@ enum motionsense_command {
 
 	/*
 	 * EC Rate command is a setter/getter command for the EC sampling rate
-	 * of all motion sensors in milliseconds.
+	 * in milliseconds.
+	 * It is per sensor, the EC run sample task  at the minimum of all
+	 * sensors EC_RATE.
+	 * For sensors without hardware FIFO, EC_RATE should be equals to 1/ODR
+	 * to collect all the sensor samples.
+	 * For sensor with hardware FIFO, EC_RATE is used as the maximal delay
+	 * to process of all motion sensors in milliseconds.
 	 */
 	MOTIONSENSE_CMD_EC_RATE = 2,
 
@@ -2222,32 +2228,76 @@ enum motionsense_command {
 	MOTIONSENSE_CMD_DATA = 6,
 
 	/*
-	 * Perform low level calibration.. On sensors that support it, ask to
-	 * do offset calibration.
+	 * Return sensor fifo info.
+	 */
+	MOTIONSENSE_CMD_FIFO_INFO = 7,
+
+	/*
+	 * Insert a flush element in the fifo and return sensor fifo info.
+	 * The host can use that element to synchronize its operation.
+	 */
+	MOTIONSENSE_CMD_FIFO_FLUSH = 8,
+
+	/*
+	 * Return a portion of the fifo.
+	 */
+	MOTIONSENSE_CMD_FIFO_READ = 9,
+
+	/*
+	 * Perform low level calibration.
+	 * On sensors that support it, ask to do offset calibration.
 	 */
 	MOTIONSENSE_CMD_PERFORM_CALIB = 10,
 
 	/*
-	 * Sensor Offset command is a setter/getter command for the offset used
-	 * for calibration. The offsets can be calculated by the host, or via
+	 * Sensor Offset command is a setter/getter command for the offset
+	 * used for calibration.
+	 * The offsets can be calculated by the host, or via
 	 * PERFORM_CALIB command.
 	 */
 	MOTIONSENSE_CMD_SENSOR_OFFSET = 11,
 
-	/* Number of motionsense sub-commands. */
-	MOTIONSENSE_NUM_CMDS
-};
+	/*
+	 * List available activities for a MOTION sensor.
+	 * Indicates if they are enabled or disabled.
+	 */
+	MOTIONSENSE_CMD_LIST_ACTIVITIES = 12,
+
+	/*
+	 * Activity management
+	 * Enable/Disable activity recognition.
+	 */
+	MOTIONSENSE_CMD_SET_ACTIVITY = 13,
+
+	/*
+	 * Lid Angle
+	 */
+	MOTIONSENSE_CMD_LID_ANGLE = 14,
+
+	/*
+	 * Allow the FIFO to trigger interrupt via MKBP events.
+	 * By default the FIFO does not send interrupt to process the FIFO
+	 * until the AP is ready or it is coming from a wakeup sensor.
+	 */
+	MOTIONSENSE_CMD_FIFO_INT_ENABLE = 15,
+
+	/*
+	 * Spoof the readings of the sensors.  The spoofed readings can be set
+	 * to arbitrary values, or will lock to the last read actual values.
+	 */
+	MOTIONSENSE_CMD_SPOOF = 16,
 
-enum motionsensor_id {
-	EC_MOTION_SENSOR_ACCEL_BASE = 0,
-	EC_MOTION_SENSOR_ACCEL_LID = 1,
-	EC_MOTION_SENSOR_GYRO = 2,
+	/* Set lid angle for tablet mode detection. */
+	MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE = 17,
 
 	/*
-	 * Note, if more sensors are added and this count changes, the padding
-	 * in ec_response_motion_sense dump command must be modified.
+	 * Sensor Scale command is a setter/getter command for the calibration
+	 * scale.
 	 */
-	EC_MOTION_SENSOR_COUNT = 3
+	MOTIONSENSE_CMD_SENSOR_SCALE = 18,
+
+	/* Number of motionsense sub-commands. */
+	MOTIONSENSE_NUM_CMDS
 };
 
 /* List of motion sensor types. */
@@ -2259,6 +2309,7 @@ enum motionsensor_type {
 	MOTIONSENSE_TYPE_LIGHT = 4,
 	MOTIONSENSE_TYPE_ACTIVITY = 5,
 	MOTIONSENSE_TYPE_BARO = 6,
+	MOTIONSENSE_TYPE_SYNC = 7,
 	MOTIONSENSE_TYPE_MAX,
 };
 
@@ -2266,36 +2317,48 @@ enum motionsensor_type {
 enum motionsensor_location {
 	MOTIONSENSE_LOC_BASE = 0,
 	MOTIONSENSE_LOC_LID = 1,
+	MOTIONSENSE_LOC_CAMERA = 2,
 	MOTIONSENSE_LOC_MAX,
 };
 
 /* List of motion sensor chips. */
 enum motionsensor_chip {
 	MOTIONSENSE_CHIP_KXCJ9 = 0,
+	MOTIONSENSE_CHIP_LSM6DS0 = 1,
+	MOTIONSENSE_CHIP_BMI160 = 2,
+	MOTIONSENSE_CHIP_SI1141 = 3,
+	MOTIONSENSE_CHIP_SI1142 = 4,
+	MOTIONSENSE_CHIP_SI1143 = 5,
+	MOTIONSENSE_CHIP_KX022 = 6,
+	MOTIONSENSE_CHIP_L3GD20H = 7,
+	MOTIONSENSE_CHIP_BMA255 = 8,
+	MOTIONSENSE_CHIP_BMP280 = 9,
+	MOTIONSENSE_CHIP_OPT3001 = 10,
+	MOTIONSENSE_CHIP_BH1730 = 11,
+	MOTIONSENSE_CHIP_GPIO = 12,
+	MOTIONSENSE_CHIP_LIS2DH = 13,
+	MOTIONSENSE_CHIP_LSM6DSM = 14,
+	MOTIONSENSE_CHIP_LIS2DE = 15,
+	MOTIONSENSE_CHIP_LIS2MDL = 16,
+	MOTIONSENSE_CHIP_LSM6DS3 = 17,
+	MOTIONSENSE_CHIP_LSM6DSO = 18,
+	MOTIONSENSE_CHIP_LNG2DM = 19,
+	MOTIONSENSE_CHIP_MAX,
 };
 
-/* Module flag masks used for the dump sub-command. */
-#define MOTIONSENSE_MODULE_FLAG_ACTIVE (1<<0)
-
-/* Sensor flag masks used for the dump sub-command. */
-#define MOTIONSENSE_SENSOR_FLAG_PRESENT (1<<0)
-
-/*
- * Send this value for the data element to only perform a read. If you
- * send any other value, the EC will interpret it as data to set and will
- * return the actual value set.
- */
-#define EC_MOTION_SENSE_NO_VALUE -1
-
-#define EC_MOTION_SENSE_INVALID_CALIB_TEMP 0x8000
-
-/* Set Calibration information */
-#define MOTION_SENSE_SET_OFFSET	1
+/* List of orientation positions */
+enum motionsensor_orientation {
+	MOTIONSENSE_ORIENTATION_LANDSCAPE = 0,
+	MOTIONSENSE_ORIENTATION_PORTRAIT = 1,
+	MOTIONSENSE_ORIENTATION_UPSIDE_DOWN_PORTRAIT = 2,
+	MOTIONSENSE_ORIENTATION_UPSIDE_DOWN_LANDSCAPE = 3,
+	MOTIONSENSE_ORIENTATION_UNKNOWN = 4,
+};
 
 struct ec_response_motion_sensor_data {
 	/* Flags for each sensor. */
 	uint8_t flags;
-	/* Sensor number the data comes from */
+	/* Sensor number the data comes from. */
 	uint8_t sensor_num;
 	/* Each sensor is up to 3-axis. */
 	union {
@@ -2312,22 +2375,138 @@ struct ec_response_motion_sensor_data {
 	};
 } __ec_todo_packed;
 
+/* Note: used in ec_response_get_next_data */
+struct ec_response_motion_sense_fifo_info {
+	/* Size of the fifo */
+	uint16_t size;
+	/* Amount of space used in the fifo */
+	uint16_t count;
+	/* Timestamp recorded in us.
+	 * aka accurate timestamp when host event was triggered.
+	 */
+	uint32_t timestamp;
+	/* Total amount of vector lost */
+	uint16_t total_lost;
+	/* Lost events since the last fifo_info, per sensors */
+	uint16_t lost[0];
+} __ec_todo_packed;
+
+struct ec_response_motion_sense_fifo_data {
+	uint32_t number_data;
+	struct ec_response_motion_sensor_data data[0];
+} __ec_todo_packed;
+
+/* List supported activity recognition */
+enum motionsensor_activity {
+	MOTIONSENSE_ACTIVITY_RESERVED = 0,
+	MOTIONSENSE_ACTIVITY_SIG_MOTION = 1,
+	MOTIONSENSE_ACTIVITY_DOUBLE_TAP = 2,
+	MOTIONSENSE_ACTIVITY_ORIENTATION = 3,
+};
+
+struct ec_motion_sense_activity {
+	uint8_t sensor_num;
+	uint8_t activity; /* one of enum motionsensor_activity */
+	uint8_t enable;   /* 1: enable, 0: disable */
+	uint8_t reserved;
+	uint16_t parameters[3]; /* activity dependent parameters */
+} __ec_todo_unpacked;
+
+/* Module flag masks used for the dump sub-command. */
+#define MOTIONSENSE_MODULE_FLAG_ACTIVE BIT(0)
+
+/* Sensor flag masks used for the dump sub-command. */
+#define MOTIONSENSE_SENSOR_FLAG_PRESENT BIT(0)
+
+/*
+ * Flush entry for synchronization.
+ * data contains time stamp
+ */
+#define MOTIONSENSE_SENSOR_FLAG_FLUSH BIT(0)
+#define MOTIONSENSE_SENSOR_FLAG_TIMESTAMP BIT(1)
+#define MOTIONSENSE_SENSOR_FLAG_WAKEUP BIT(2)
+#define MOTIONSENSE_SENSOR_FLAG_TABLET_MODE BIT(3)
+#define MOTIONSENSE_SENSOR_FLAG_ODR BIT(4)
+
+/*
+ * Send this value for the data element to only perform a read. If you
+ * send any other value, the EC will interpret it as data to set and will
+ * return the actual value set.
+ */
+#define EC_MOTION_SENSE_NO_VALUE -1
+
+#define EC_MOTION_SENSE_INVALID_CALIB_TEMP 0x8000
+
+/* MOTIONSENSE_CMD_SENSOR_OFFSET subcommand flag */
+/* Set Calibration information */
+#define MOTION_SENSE_SET_OFFSET BIT(0)
+
+/* Default Scale value, factor 1. */
+#define MOTION_SENSE_DEFAULT_SCALE BIT(15)
+
+#define LID_ANGLE_UNRELIABLE 500
+
+enum motionsense_spoof_mode {
+	/* Disable spoof mode. */
+	MOTIONSENSE_SPOOF_MODE_DISABLE = 0,
+
+	/* Enable spoof mode, but use provided component values. */
+	MOTIONSENSE_SPOOF_MODE_CUSTOM,
+
+	/* Enable spoof mode, but use the current sensor values. */
+	MOTIONSENSE_SPOOF_MODE_LOCK_CURRENT,
+
+	/* Query the current spoof mode status for the sensor. */
+	MOTIONSENSE_SPOOF_MODE_QUERY,
+};
+
 struct ec_params_motion_sense {
 	uint8_t cmd;
 	union {
 		/* Used for MOTIONSENSE_CMD_DUMP. */
 		struct __ec_todo_unpacked {
-			/* no args */
+			/*
+			 * Maximal number of sensor the host is expecting.
+			 * 0 means the host is only interested in the number
+			 * of sensors controlled by the EC.
+			 */
+			uint8_t max_sensor_count;
 		} dump;
 
 		/*
-		 * Used for MOTIONSENSE_CMD_EC_RATE and
-		 * MOTIONSENSE_CMD_KB_WAKE_ANGLE.
+		 * Used for MOTIONSENSE_CMD_KB_WAKE_ANGLE.
 		 */
 		struct __ec_todo_unpacked {
-			/* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */
+			/* Data to set or EC_MOTION_SENSE_NO_VALUE to read.
+			 * kb_wake_angle: angle to wakup AP.
+			 */
 			int16_t data;
-		} ec_rate, kb_wake_angle;
+		} kb_wake_angle;
+
+		/*
+		 * Used for MOTIONSENSE_CMD_INFO, MOTIONSENSE_CMD_DATA
+		 * and MOTIONSENSE_CMD_PERFORM_CALIB.
+		 */
+		struct __ec_todo_unpacked {
+			uint8_t sensor_num;
+		} info, info_3, data, fifo_flush, perform_calib,
+				list_activities;
+
+		/*
+		 * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR
+		 * and MOTIONSENSE_CMD_SENSOR_RANGE.
+		 */
+		struct __ec_todo_unpacked {
+			uint8_t sensor_num;
+
+			/* Rounding flag, true for round-up, false for down. */
+			uint8_t roundup;
+
+			uint16_t reserved;
+
+			/* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */
+			int32_t data;
+		} ec_rate, sensor_odr, sensor_range;
 
 		/* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */
 		struct __ec_todo_packed {
@@ -2358,33 +2537,99 @@ struct ec_params_motion_sense {
 			int16_t offset[3];
 		} sensor_offset;
 
-		/* Used for MOTIONSENSE_CMD_INFO. */
+		/* Used for MOTIONSENSE_CMD_SENSOR_SCALE */
 		struct __ec_todo_packed {
 			uint8_t sensor_num;
-		} info;
 
-		/*
-		 * Used for MOTIONSENSE_CMD_SENSOR_ODR and
-		 * MOTIONSENSE_CMD_SENSOR_RANGE.
-		 */
-		struct {
-			/* Should be element of enum motionsensor_id. */
-			uint8_t sensor_num;
+			/*
+			 * bit 0: If set (MOTION_SENSE_SET_OFFSET), set
+			 * the calibration information in the EC.
+			 * If unset, just retrieve calibration information.
+			 */
+			uint16_t flags;
 
-			/* Rounding flag, true for round-up, false for down. */
-			uint8_t roundup;
+			/*
+			 * Temperature at calibration, in units of 0.01 C
+			 * 0x8000: invalid / unknown.
+			 * 0x0: 0C
+			 * 0x7fff: +327.67C
+			 */
+			int16_t temp;
 
-			uint16_t reserved;
+			/*
+			 * Scale for calibration:
+			 * By default scale is 1, it is encoded on 16bits:
+			 * 1 = BIT(15)
+			 * ~2 = 0xFFFF
+			 * ~0 = 0.
+			 */
+			uint16_t scale[3];
+		} sensor_scale;
 
-			/* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */
-			int32_t data;
-		} sensor_odr, sensor_range;
+
+		/* Used for MOTIONSENSE_CMD_FIFO_INFO */
+		/* (no params) */
+
+		/* Used for MOTIONSENSE_CMD_FIFO_READ */
+		struct __ec_todo_unpacked {
+			/*
+			 * Number of expected vector to return.
+			 * EC may return less or 0 if none available.
+			 */
+			uint32_t max_data_vector;
+		} fifo_read;
+
+		struct ec_motion_sense_activity set_activity;
+
+		/* Used for MOTIONSENSE_CMD_LID_ANGLE */
+		/* (no params) */
+
+		/* Used for MOTIONSENSE_CMD_FIFO_INT_ENABLE */
+		struct __ec_todo_unpacked {
+			/*
+			 * 1: enable, 0 disable fifo,
+			 * EC_MOTION_SENSE_NO_VALUE return value.
+			 */
+			int8_t enable;
+		} fifo_int_enable;
+
+		/* Used for MOTIONSENSE_CMD_SPOOF */
+		struct __ec_todo_packed {
+			uint8_t sensor_id;
+
+			/* See enum motionsense_spoof_mode. */
+			uint8_t spoof_enable;
+
+			/* Ignored, used for alignment. */
+			uint8_t reserved;
+
+			/* Individual component values to spoof. */
+			int16_t components[3];
+		} spoof;
+
+		/* Used for MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE. */
+		struct __ec_todo_unpacked {
+			/*
+			 * Lid angle threshold for switching between tablet and
+			 * clamshell mode.
+			 */
+			int16_t lid_angle;
+
+			/*
+			 * Hysteresis degree to prevent fluctuations between
+			 * clamshell and tablet mode if lid angle keeps
+			 * changing around the threshold. Lid motion driver will
+			 * use lid_angle + hys_degree to trigger tablet mode and
+			 * lid_angle - hys_degree to trigger clamshell mode.
+			 */
+			int16_t hys_degree;
+		} tablet_mode_threshold;
 	};
 } __ec_todo_packed;
 
 struct ec_response_motion_sense {
 	union {
-		/* Used for MOTIONSENSE_CMD_DUMP. */
+		/* Used for MOTIONSENSE_CMD_DUMP */
 		struct __ec_todo_unpacked {
 			/* Flags representing the motion sensor module. */
 			uint8_t module_flags;
@@ -2411,27 +2656,118 @@ struct ec_response_motion_sense {
 			uint8_t chip;
 		} info;
 
+		/* Used for MOTIONSENSE_CMD_INFO version 3 */
+		struct __ec_todo_unpacked {
+			/* Should be element of enum motionsensor_type. */
+			uint8_t type;
+
+			/* Should be element of enum motionsensor_location. */
+			uint8_t location;
+
+			/* Should be element of enum motionsensor_chip. */
+			uint8_t chip;
+
+			/* Minimum sensor sampling frequency */
+			uint32_t min_frequency;
+
+			/* Maximum sensor sampling frequency */
+			uint32_t max_frequency;
+
+			/* Max number of sensor events that could be in fifo */
+			uint32_t fifo_max_event_count;
+		} info_3;
+
 		/* Used for MOTIONSENSE_CMD_DATA */
 		struct ec_response_motion_sensor_data data;
 
 		/*
 		 * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR,
-		 * MOTIONSENSE_CMD_SENSOR_RANGE, and
-		 * MOTIONSENSE_CMD_KB_WAKE_ANGLE.
+		 * MOTIONSENSE_CMD_SENSOR_RANGE,
+		 * MOTIONSENSE_CMD_KB_WAKE_ANGLE,
+		 * MOTIONSENSE_CMD_FIFO_INT_ENABLE and
+		 * MOTIONSENSE_CMD_SPOOF.
 		 */
 		struct __ec_todo_unpacked {
 			/* Current value of the parameter queried. */
 			int32_t ret;
-		} ec_rate, sensor_odr, sensor_range, kb_wake_angle;
+		} ec_rate, sensor_odr, sensor_range, kb_wake_angle,
+		  fifo_int_enable, spoof;
 
-		/* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */
+		/*
+		 * Used for MOTIONSENSE_CMD_SENSOR_OFFSET,
+		 * PERFORM_CALIB.
+		 */
 		struct __ec_todo_unpacked  {
 			int16_t temp;
 			int16_t offset[3];
 		} sensor_offset, perform_calib;
+
+		/* Used for MOTIONSENSE_CMD_SENSOR_SCALE */
+		struct __ec_todo_unpacked  {
+			int16_t temp;
+			uint16_t scale[3];
+		} sensor_scale;
+
+		struct ec_response_motion_sense_fifo_info fifo_info, fifo_flush;
+
+		struct ec_response_motion_sense_fifo_data fifo_read;
+
+		struct __ec_todo_packed {
+			uint16_t reserved;
+			uint32_t enabled;
+			uint32_t disabled;
+		} list_activities;
+
+		/* No params for set activity */
+
+		/* Used for MOTIONSENSE_CMD_LID_ANGLE */
+		struct __ec_todo_unpacked {
+			/*
+			 * Angle between 0 and 360 degree if available,
+			 * LID_ANGLE_UNRELIABLE otherwise.
+			 */
+			uint16_t value;
+		} lid_angle;
+
+		/* Used for MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE. */
+		struct __ec_todo_unpacked {
+			/*
+			 * Lid angle threshold for switching between tablet and
+			 * clamshell mode.
+			 */
+			uint16_t lid_angle;
+
+			/* Hysteresis degree. */
+			uint16_t hys_degree;
+		} tablet_mode_threshold;
+
 	};
 } __ec_todo_packed;
 
+/*****************************************************************************/
+/* Force lid open command */
+
+/* Make lid event always open */
+#define EC_CMD_FORCE_LID_OPEN 0x002C
+
+struct ec_params_force_lid_open {
+	uint8_t enabled;
+} __ec_align1;
+
+/*****************************************************************************/
+/* Configure the behavior of the power button */
+#define EC_CMD_CONFIG_POWER_BUTTON 0x002D
+
+enum ec_config_power_button_flags {
+	/* Enable/Disable power button pulses for x86 devices */
+	EC_POWER_BUTTON_ENABLE_PULSE = BIT(0),
+};
+
+struct ec_params_config_power_button {
+	/* See enum ec_config_power_button_flags */
+	uint8_t flags;
+} __ec_align1;
+
 /*****************************************************************************/
 /* USB charging control commands */
 
@@ -2888,6 +3224,12 @@ union __ec_align_offset1 ec_response_get_next_data {
 	/* Unaligned */
 	uint32_t  host_event;
 
+	struct __ec_todo_unpacked {
+		/* For aligning the fifo_info */
+		uint8_t reserved[3];
+		struct ec_response_motion_sense_fifo_info info;
+	} sensor_fifo;
+
 	uint32_t   buttons;
 	uint32_t   switches;
 	uint32_t   sysrq;
@@ -2896,6 +3238,12 @@ union __ec_align_offset1 ec_response_get_next_data {
 union __ec_align_offset1 ec_response_get_next_data_v1 {
 	uint8_t key_matrix[16];
 	uint32_t host_event;
+	struct __ec_todo_unpacked {
+		/* For aligning the fifo_info */
+		uint8_t reserved[3];
+		struct ec_response_motion_sense_fifo_info info;
+	} sensor_fifo;
+
 	uint32_t buttons;
 	uint32_t switches;
 	uint32_t sysrq;
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 16/30] mfd: cros_ec: Fix event processing API
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (14 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 15/30] mfd: cros_ec: Complete MEMS sensor API Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 17/30] mfd: cros_ec: Add fingerprint API Gwendal Grignou
                   ` (16 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Improve API between EC and Host to report events.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 87 ++++++++++++++++++++++++----
 1 file changed, 76 insertions(+), 11 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 701b03cfa445..51fe65170ce6 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -500,7 +500,8 @@ enum host_event_code {
 	EC_HOST_EVENT_BATTERY_CRITICAL = 7,
 	EC_HOST_EVENT_BATTERY = 8,
 	EC_HOST_EVENT_THERMAL_THRESHOLD = 9,
-	EC_HOST_EVENT_THERMAL_OVERLOAD = 10,
+	/* Event generated by a device attached to the EC */
+	EC_HOST_EVENT_DEVICE = 10,
 	EC_HOST_EVENT_THERMAL = 11,
 	EC_HOST_EVENT_USB_CHARGER = 12,
 	EC_HOST_EVENT_KEY_PRESSED = 13,
@@ -527,15 +528,34 @@ enum host_event_code {
 	EC_HOST_EVENT_HANG_DETECT = 20,
 	/* Hang detect logic detected a hang and warm rebooted the AP */
 	EC_HOST_EVENT_HANG_REBOOT = 21,
+
 	/* PD MCU triggering host event */
 	EC_HOST_EVENT_PD_MCU = 22,
 
-	/* EC desires to change state of host-controlled USB mux */
-	EC_HOST_EVENT_USB_MUX = 28,
+	/* Battery Status flags have changed */
+	EC_HOST_EVENT_BATTERY_STATUS = 23,
+
+	/* EC encountered a panic, triggering a reset */
+	EC_HOST_EVENT_PANIC = 24,
+
+	/* Keyboard fastboot combo has been pressed */
+	EC_HOST_EVENT_KEYBOARD_FASTBOOT = 25,
 
 	/* EC RTC event occurred */
 	EC_HOST_EVENT_RTC = 26,
 
+	/* Emulate MKBP event */
+	EC_HOST_EVENT_MKBP = 27,
+
+	/* EC desires to change state of host-controlled USB mux */
+	EC_HOST_EVENT_USB_MUX = 28,
+
+	/* TABLET/LAPTOP mode or detachable base attach/detach event */
+	EC_HOST_EVENT_MODE_CHANGE = 29,
+
+	/* Keyboard recovery combo with hardware reinitialization */
+	EC_HOST_EVENT_KEYBOARD_RECOVERY_HW_REINIT = 30,
+
 	/*
 	 * The high bit of the event mask is not used as a host event code.  If
 	 * it reads back as set, then the entire event mask should be
@@ -1259,7 +1279,7 @@ enum ec_feature_code {
 	EC_FEATURE_REFINED_TABLET_MODE_HYSTERESIS = 37,
 	/* EC supports audio codec. */
 	EC_FEATURE_AUDIO_CODEC = 38,
-	/* EC Supports SCP. */
+	/* The MCU is a System Companion Processor (SCP). */
 	EC_FEATURE_SCP = 39,
 	/* The MCU is an Integrated Sensor Hub */
 	EC_FEATURE_ISH = 40,
@@ -3183,12 +3203,23 @@ struct ec_result_keyscan_seq_ctrl {
 } __ec_todo_packed;
 
 /*
- * Command for retrieving the next pending MKBP event from the EC device
+ * Get the next pending MKBP event.
  *
- * The device replies with UNAVAILABLE if there aren't any pending events.
+ * Returns EC_RES_UNAVAILABLE if there is no event pending.
  */
 #define EC_CMD_GET_NEXT_EVENT 0x0067
 
+#define EC_MKBP_HAS_MORE_EVENTS_SHIFT 7
+
+/*
+ * We use the most significant bit of the event type to indicate to the host
+ * that the EC has more MKBP events available to provide.
+ */
+#define EC_MKBP_HAS_MORE_EVENTS BIT(EC_MKBP_HAS_MORE_EVENTS_SHIFT)
+
+/* The mask to apply to get the raw event type */
+#define EC_MKBP_EVENT_TYPE_MASK (BIT(EC_MKBP_HAS_MORE_EVENTS_SHIFT) - 1)
+
 enum ec_mkbp_event {
 	/* Keyboard matrix changed. The event data is the new matrix state. */
 	EC_MKBP_EVENT_KEY_MATRIX = 0,
@@ -3205,9 +3236,21 @@ enum ec_mkbp_event {
 	/* The state of the switches have changed. */
 	EC_MKBP_EVENT_SWITCH = 4,
 
-	/* EC sent a sysrq command */
+	/* New Fingerprint sensor event, the event data is fp_events bitmap. */
+	EC_MKBP_EVENT_FINGERPRINT = 5,
+
+	/*
+	 * Sysrq event: send emulated sysrq. The event data is sysrq,
+	 * corresponding to the key to be pressed.
+	 */
 	EC_MKBP_EVENT_SYSRQ = 6,
 
+	/*
+	 * New 64-bit host event.
+	 * The event data is 8 bytes of host event flags.
+	 */
+	EC_MKBP_EVENT_HOST_EVENT64 = 7,
+
 	/* Notify the AP that something happened on CEC */
 	EC_MKBP_EVENT_CEC_EVENT = 8,
 
@@ -3217,12 +3260,14 @@ enum ec_mkbp_event {
 	/* Number of MKBP events */
 	EC_MKBP_EVENT_COUNT,
 };
+BUILD_ASSERT(EC_MKBP_EVENT_COUNT <= EC_MKBP_EVENT_TYPE_MASK);
 
 union __ec_align_offset1 ec_response_get_next_data {
 	uint8_t key_matrix[13];
 
 	/* Unaligned */
-	uint32_t  host_event;
+	uint32_t host_event;
+	uint64_t host_event64;
 
 	struct __ec_todo_unpacked {
 		/* For aligning the fifo_info */
@@ -3230,14 +3275,25 @@ union __ec_align_offset1 ec_response_get_next_data {
 		struct ec_response_motion_sense_fifo_info info;
 	} sensor_fifo;
 
-	uint32_t   buttons;
-	uint32_t   switches;
-	uint32_t   sysrq;
+	uint32_t buttons;
+
+	uint32_t switches;
+
+	uint32_t fp_events;
+
+	uint32_t sysrq;
+
+	/* CEC events from enum mkbp_cec_event */
+	uint32_t cec_events;
 };
 
 union __ec_align_offset1 ec_response_get_next_data_v1 {
 	uint8_t key_matrix[16];
+
+	/* Unaligned */
 	uint32_t host_event;
+	uint64_t host_event64;
+
 	struct __ec_todo_unpacked {
 		/* For aligning the fifo_info */
 		uint8_t reserved[3];
@@ -3245,11 +3301,19 @@ union __ec_align_offset1 ec_response_get_next_data_v1 {
 	} sensor_fifo;
 
 	uint32_t buttons;
+
 	uint32_t switches;
+
+	uint32_t fp_events;
+
 	uint32_t sysrq;
+
+	/* CEC events from enum mkbp_cec_event */
 	uint32_t cec_events;
+
 	uint8_t cec_message[16];
 };
+BUILD_ASSERT(sizeof(union ec_response_get_next_data_v1) == 16);
 
 struct ec_response_get_next_event {
 	uint8_t event_type;
@@ -3268,6 +3332,7 @@ struct ec_response_get_next_event_v1 {
 #define EC_MKBP_POWER_BUTTON	0
 #define EC_MKBP_VOL_UP		1
 #define EC_MKBP_VOL_DOWN	2
+#define EC_MKBP_RECOVERY	3
 
 /* Switches */
 #define EC_MKBP_LID_OPEN	0
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 17/30] mfd: cros_ec: Add fingerprint API
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (15 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 16/30] mfd: cros_ec: Fix event processing API Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 18/30] mfd: cros_ec: Fix temperature API Gwendal Grignou
                   ` (15 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Add support for fingerprint sensors managed by embedded controller.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 34 ++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 51fe65170ce6..d5d07a9957ec 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -3339,6 +3339,40 @@ struct ec_response_get_next_event_v1 {
 #define EC_MKBP_TABLET_MODE	1
 #define EC_MKBP_BASE_ATTACHED	2
 
+/* Fingerprint events in 'fp_events' for EC_MKBP_EVENT_FINGERPRINT */
+#define EC_MKBP_FP_RAW_EVENT(fp_events) ((fp_events) & 0x00FFFFFF)
+#define EC_MKBP_FP_ERRCODE(fp_events)   ((fp_events) & 0x0000000F)
+#define EC_MKBP_FP_ENROLL_PROGRESS_OFFSET 4
+#define EC_MKBP_FP_ENROLL_PROGRESS(fpe) (((fpe) & 0x00000FF0) \
+					 >> EC_MKBP_FP_ENROLL_PROGRESS_OFFSET)
+#define EC_MKBP_FP_MATCH_IDX_OFFSET 12
+#define EC_MKBP_FP_MATCH_IDX_MASK 0x0000F000
+#define EC_MKBP_FP_MATCH_IDX(fpe) (((fpe) & EC_MKBP_FP_MATCH_IDX_MASK) \
+					 >> EC_MKBP_FP_MATCH_IDX_OFFSET)
+#define EC_MKBP_FP_ENROLL               BIT(27)
+#define EC_MKBP_FP_MATCH                BIT(28)
+#define EC_MKBP_FP_FINGER_DOWN          BIT(29)
+#define EC_MKBP_FP_FINGER_UP            BIT(30)
+#define EC_MKBP_FP_IMAGE_READY          BIT(31)
+/* code given by EC_MKBP_FP_ERRCODE() when EC_MKBP_FP_ENROLL is set */
+#define EC_MKBP_FP_ERR_ENROLL_OK               0
+#define EC_MKBP_FP_ERR_ENROLL_LOW_QUALITY      1
+#define EC_MKBP_FP_ERR_ENROLL_IMMOBILE         2
+#define EC_MKBP_FP_ERR_ENROLL_LOW_COVERAGE     3
+#define EC_MKBP_FP_ERR_ENROLL_INTERNAL         5
+/* Can be used to detect if image was usable for enrollment or not. */
+#define EC_MKBP_FP_ERR_ENROLL_PROBLEM_MASK     1
+/* code given by EC_MKBP_FP_ERRCODE() when EC_MKBP_FP_MATCH is set */
+#define EC_MKBP_FP_ERR_MATCH_NO                0
+#define EC_MKBP_FP_ERR_MATCH_NO_INTERNAL       6
+#define EC_MKBP_FP_ERR_MATCH_NO_TEMPLATES      7
+#define EC_MKBP_FP_ERR_MATCH_NO_LOW_QUALITY    2
+#define EC_MKBP_FP_ERR_MATCH_NO_LOW_COVERAGE   4
+#define EC_MKBP_FP_ERR_MATCH_YES               1
+#define EC_MKBP_FP_ERR_MATCH_YES_UPDATED       3
+#define EC_MKBP_FP_ERR_MATCH_YES_UPDATE_FAILED 5
+
+
 /*****************************************************************************/
 /* Temperature sensor commands */
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 18/30] mfd: cros_ec: Fix temperature API
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (16 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 17/30] mfd: cros_ec: Add fingerprint API Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 19/30] mfd: cros_ec: Complete Power and USB PD API Gwendal Grignou
                   ` (14 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Improve API to retrieve temperature information.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 64 +++++++++++++++++++++++++---
 1 file changed, 57 insertions(+), 7 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index d5d07a9957ec..9a84aad7475a 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -2945,9 +2945,28 @@ enum ec_temp_thresholds {
 /*
  * Thermal configuration for one temperature sensor. Temps are in degrees K.
  * Zero values will be silently ignored by the thermal task.
+ *
+ * Set 'temp_host' value allows thermal task to trigger some event with 1 degree
+ * hysteresis.
+ * For example,
+ *	temp_host[EC_TEMP_THRESH_HIGH] = 300 K
+ *	temp_host_release[EC_TEMP_THRESH_HIGH] = 0 K
+ * EC will throttle ap when temperature >= 301 K, and release throttling when
+ * temperature <= 299 K.
+ *
+ * Set 'temp_host_release' value allows thermal task has a custom hysteresis.
+ * For example,
+ *	temp_host[EC_TEMP_THRESH_HIGH] = 300 K
+ *	temp_host_release[EC_TEMP_THRESH_HIGH] = 295 K
+ * EC will throttle ap when temperature >= 301 K, and release throttling when
+ * temperature <= 294 K.
+ *
+ * Note that this structure is a sub-structure of
+ * ec_params_thermal_set_threshold_v1, but maintains its alignment there.
  */
 struct ec_thermal_config {
 	uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */
+	uint32_t temp_host_release[EC_TEMP_THRESH_COUNT]; /* release levels */
 	uint32_t temp_fan_off;		/* no active cooling needed */
 	uint32_t temp_fan_max;		/* max active cooling needed */
 } __ec_align4;
@@ -2973,32 +2992,63 @@ struct ec_params_thermal_set_threshold_v1 {
 /* Toggle automatic fan control */
 #define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x0052
 
-/* Get TMP006 calibration data */
+/* Version 1 of input params */
+struct ec_params_auto_fan_ctrl_v1 {
+	uint8_t fan_idx;
+} __ec_align1;
+
+/* Get/Set TMP006 calibration data */
 #define EC_CMD_TMP006_GET_CALIBRATION 0x0053
+#define EC_CMD_TMP006_SET_CALIBRATION 0x0054
+
+/*
+ * The original TMP006 calibration only needed four params, but now we need
+ * more. Since the algorithm is nothing but magic numbers anyway, we'll leave
+ * the params opaque. The v1 "get" response will include the algorithm number
+ * and how many params it requires. That way we can change the EC code without
+ * needing to update this file. We can also use a different algorithm on each
+ * sensor.
+ */
 
+/* This is the same struct for both v0 and v1. */
 struct ec_params_tmp006_get_calibration {
 	uint8_t index;
 } __ec_align1;
 
-struct ec_response_tmp006_get_calibration {
+/* Version 0 */
+struct ec_response_tmp006_get_calibration_v0 {
 	float s0;
 	float b0;
 	float b1;
 	float b2;
 } __ec_align4;
 
-/* Set TMP006 calibration data */
-#define EC_CMD_TMP006_SET_CALIBRATION 0x0054
-
-struct ec_params_tmp006_set_calibration {
+struct ec_params_tmp006_set_calibration_v0 {
 	uint8_t index;
-	uint8_t reserved[3];  /* Reserved; set 0 */
+	uint8_t reserved[3];
 	float s0;
 	float b0;
 	float b1;
 	float b2;
 } __ec_align4;
 
+/* Version 1 */
+struct ec_response_tmp006_get_calibration_v1 {
+	uint8_t algorithm;
+	uint8_t num_params;
+	uint8_t reserved[2];
+	float val[0];
+} __ec_align4;
+
+struct ec_params_tmp006_set_calibration_v1 {
+	uint8_t index;
+	uint8_t algorithm;
+	uint8_t num_params;
+	uint8_t reserved;
+	float val[0];
+} __ec_align4;
+
+
 /* Read raw TMP006 data */
 #define EC_CMD_TMP006_GET_RAW 0x0055
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 19/30] mfd: cros_ec: Complete Power and USB PD API
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (17 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 18/30] mfd: cros_ec: Fix temperature API Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 20/30] mfd: cros_ec: Add API for keyboard testing Gwendal Grignou
                   ` (13 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Improve API for USB Powe delivery and power management.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 236 ++++++++++++++++++++++++++-
 1 file changed, 228 insertions(+), 8 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 9a84aad7475a..e05cdcb12481 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -2796,7 +2796,8 @@ struct ec_params_config_power_button {
 
 struct ec_params_usb_charge_set_mode {
 	uint8_t usb_port_id;
-	uint8_t mode;
+	uint8_t mode:7;
+	uint8_t inhibit_charge:1;
 } __ec_align1;
 
 /*****************************************************************************/
@@ -3933,6 +3934,11 @@ enum charge_state_params {
 	CS_PARAM_CHG_INPUT_CURRENT,   /* charger input current limit */
 	CS_PARAM_CHG_STATUS,	      /* charger-specific status */
 	CS_PARAM_CHG_OPTION,	      /* charger-specific options */
+	CS_PARAM_LIMIT_POWER,	      /*
+				       * Check if power is limited due to
+				       * low battery and / or a weak external
+				       * charger. READ ONLY.
+				       */
 	/* How many so far? */
 	CS_NUM_BASE_PARAMS,
 
@@ -3940,6 +3946,17 @@ enum charge_state_params {
 	CS_PARAM_CUSTOM_PROFILE_MIN = 0x10000,
 	CS_PARAM_CUSTOM_PROFILE_MAX = 0x1ffff,
 
+	/* Range for CONFIG_CHARGE_STATE_DEBUG params */
+	CS_PARAM_DEBUG_MIN = 0x20000,
+	CS_PARAM_DEBUG_CTL_MODE = 0x20000,
+	CS_PARAM_DEBUG_MANUAL_MODE,
+	CS_PARAM_DEBUG_SEEMS_DEAD,
+	CS_PARAM_DEBUG_SEEMS_DISCONNECTED,
+	CS_PARAM_DEBUG_BATT_REMOVED,
+	CS_PARAM_DEBUG_MANUAL_CURRENT,
+	CS_PARAM_DEBUG_MANUAL_VOLTAGE,
+	CS_PARAM_DEBUG_MAX = 0x2ffff,
+
 	/* Other custom param ranges go here... */
 };
 
@@ -4000,6 +4017,16 @@ struct ec_params_external_power_limit_v1 {
 
 #define EC_POWER_LIMIT_NONE 0xffff
 
+/*
+ * Set maximum voltage & current of a dedicated charge port
+ */
+#define EC_CMD_OVERRIDE_DEDICATED_CHARGER_LIMIT 0x00A3
+
+struct ec_params_dedicated_charger_limit {
+	uint16_t current_lim; /* in mA */
+	uint16_t voltage_lim; /* in mV */
+} __ec_align2;
+
 /* Inform the EC when entering a sleep state */
 #define EC_CMD_HOST_SLEEP_EVENT 0x00A9
 
@@ -4385,18 +4412,53 @@ struct ec_params_reboot_ec {
 
 /* EC to PD MCU exchange status command */
 #define EC_CMD_PD_EXCHANGE_STATUS 0x0100
+#define EC_VER_PD_EXCHANGE_STATUS 2
+
+enum pd_charge_state {
+	PD_CHARGE_NO_CHANGE = 0, /* Don't change charge state */
+	PD_CHARGE_NONE,          /* No charging allowed */
+	PD_CHARGE_5V,            /* 5V charging only */
+	PD_CHARGE_MAX            /* Charge at max voltage */
+};
 
 /* Status of EC being sent to PD */
+#define EC_STATUS_HIBERNATING	BIT(0)
+
 struct ec_params_pd_status {
-	int8_t batt_soc; /* battery state of charge */
+	uint8_t status;       /* EC status */
+	int8_t batt_soc;      /* battery state of charge */
+	uint8_t charge_state; /* charging state (from enum pd_charge_state) */
 } __ec_align1;
 
 /* Status of PD being sent back to EC */
+#define PD_STATUS_HOST_EVENT      BIT(0) /* Forward host event to AP */
+#define PD_STATUS_IN_RW           BIT(1) /* Running RW image */
+#define PD_STATUS_JUMPED_TO_IMAGE BIT(2) /* Current image was jumped to */
+#define PD_STATUS_TCPC_ALERT_0    BIT(3) /* Alert active in port 0 TCPC */
+#define PD_STATUS_TCPC_ALERT_1    BIT(4) /* Alert active in port 1 TCPC */
+#define PD_STATUS_TCPC_ALERT_2    BIT(5) /* Alert active in port 2 TCPC */
+#define PD_STATUS_TCPC_ALERT_3    BIT(6) /* Alert active in port 3 TCPC */
+#define PD_STATUS_EC_INT_ACTIVE  (PD_STATUS_TCPC_ALERT_0 | \
+				      PD_STATUS_TCPC_ALERT_1 | \
+				      PD_STATUS_HOST_EVENT)
 struct ec_response_pd_status {
-	int8_t status;        /* PD MCU status */
-	uint32_t curr_lim_ma; /* input current limit */
+	uint32_t curr_lim_ma;       /* input current limit */
+	uint16_t status;            /* PD MCU status */
+	int8_t active_charge_port;  /* active charging port */
 } __ec_align_size1;
 
+/* AP to PD MCU host event status command, cleared on read */
+#define EC_CMD_PD_HOST_EVENT_STATUS 0x0104
+
+/* PD MCU host event status bits */
+#define PD_EVENT_UPDATE_DEVICE     BIT(0)
+#define PD_EVENT_POWER_CHANGE      BIT(1)
+#define PD_EVENT_IDENTITY_RECEIVED BIT(2)
+#define PD_EVENT_DATA_SWAP         BIT(3)
+struct ec_response_host_event_status {
+	uint32_t status;      /* PD MCU host event status */
+} __ec_align4;
+
 /* Set USB type-C port role and muxes */
 #define EC_CMD_USB_PD_CONTROL 0x0101
 
@@ -4406,6 +4468,8 @@ enum usb_pd_control_role {
 	USB_PD_CTRL_ROLE_TOGGLE_OFF = 2,
 	USB_PD_CTRL_ROLE_FORCE_SINK = 3,
 	USB_PD_CTRL_ROLE_FORCE_SOURCE = 4,
+	USB_PD_CTRL_ROLE_FREEZE = 5,
+	USB_PD_CTRL_ROLE_COUNT
 };
 
 enum usb_pd_control_mux {
@@ -4415,6 +4479,7 @@ enum usb_pd_control_mux {
 	USB_PD_CTRL_MUX_DP = 3,
 	USB_PD_CTRL_MUX_DOCK = 4,
 	USB_PD_CTRL_MUX_AUTO = 5,
+	USB_PD_CTRL_MUX_COUNT
 };
 
 enum usb_pd_control_swap {
@@ -4444,6 +4509,13 @@ struct ec_params_usb_pd_control {
 #define PD_CTRL_RESP_ROLE_USB_COMM      BIT(5) /* Partner USB comm capable */
 #define PD_CTRL_RESP_ROLE_EXT_POWERED   BIT(6) /* Partner externally powerd */
 
+struct ec_response_usb_pd_control {
+	uint8_t enabled;
+	uint8_t role;
+	uint8_t polarity;
+	uint8_t state;
+} __ec_align1;
+
 struct ec_response_usb_pd_control_v1 {
 	uint8_t enabled;
 	uint8_t role;
@@ -4451,6 +4523,25 @@ struct ec_response_usb_pd_control_v1 {
 	char state[32];
 } __ec_align1;
 
+/* Values representing usbc PD CC state */
+#define USBC_PD_CC_NONE		0 /* No accessory connected */
+#define USBC_PD_CC_NO_UFP	1 /* No UFP accessory connected */
+#define USBC_PD_CC_AUDIO_ACC	2 /* Audio accessory connected */
+#define USBC_PD_CC_DEBUG_ACC	3 /* Debug accessory connected */
+#define USBC_PD_CC_UFP_ATTACHED	4 /* UFP attached to usbc */
+#define USBC_PD_CC_DFP_ATTACHED	5 /* DPF attached to usbc */
+
+struct ec_response_usb_pd_control_v2 {
+	uint8_t enabled;
+	uint8_t role;
+	uint8_t polarity;
+	char state[32];
+	uint8_t cc_state; /* USBC_PD_CC_*Encoded cc state */
+	uint8_t dp_mode;  /* Current DP pin mode (MODE_DP_PIN_[A-E]) */
+	/* CL:1500994 Current cable type */
+	uint8_t reserved_cable_type;
+} __ec_align1;
+
 #define EC_CMD_USB_PD_PORTS 0x0102
 
 /* Maximum number of PD ports on a device, num_ports will be <= this */
@@ -4478,6 +4569,7 @@ enum usb_chg_type {
 	USB_CHG_TYPE_OTHER,
 	USB_CHG_TYPE_VBUS,
 	USB_CHG_TYPE_UNKNOWN,
+	USB_CHG_TYPE_DEDICATED,
 };
 enum usb_power_roles {
 	USB_PD_PORT_POWER_DISCONNECTED,
@@ -4502,9 +4594,6 @@ struct ec_response_usb_pd_power_info {
 	uint32_t max_power;
 } __ec_align4;
 
-struct ec_params_usb_pd_info_request {
-	uint8_t port;
-} __ec_align1;
 
 /*
  * This command will return the number of USB PD charge port + the number
@@ -4516,6 +4605,46 @@ struct ec_response_charge_port_count {
 	uint8_t port_count;
 } __ec_align1;
 
+/* Write USB-PD device FW */
+#define EC_CMD_USB_PD_FW_UPDATE 0x0110
+
+enum usb_pd_fw_update_cmds {
+	USB_PD_FW_REBOOT,
+	USB_PD_FW_FLASH_ERASE,
+	USB_PD_FW_FLASH_WRITE,
+	USB_PD_FW_ERASE_SIG,
+};
+
+struct ec_params_usb_pd_fw_update {
+	uint16_t dev_id;
+	uint8_t cmd;
+	uint8_t port;
+	uint32_t size;     /* Size to write in bytes */
+	/* Followed by data to write */
+} __ec_align4;
+
+/* Write USB-PD Accessory RW_HASH table entry */
+#define EC_CMD_USB_PD_RW_HASH_ENTRY 0x0111
+/* RW hash is first 20 bytes of SHA-256 of RW section */
+#define PD_RW_HASH_SIZE 20
+struct ec_params_usb_pd_rw_hash_entry {
+	uint16_t dev_id;
+	uint8_t dev_rw_hash[PD_RW_HASH_SIZE];
+	uint8_t reserved;        /*
+				  * For alignment of current_image
+				  * TODO(rspangler) but it's not aligned!
+				  * Should have been reserved[2].
+				  */
+	uint32_t current_image;  /* One of ec_current_image */
+} __ec_align1;
+
+/* Read USB-PD Accessory info */
+#define EC_CMD_USB_PD_DEV_INFO 0x0112
+
+struct ec_params_usb_pd_info_request {
+	uint8_t port;
+} __ec_align1;
+
 /* Read USB-PD Device discovery info */
 #define EC_CMD_USB_PD_DISCOVERY 0x0113
 struct ec_params_usb_pd_discovery_entry {
@@ -4538,7 +4667,11 @@ struct ec_params_charge_port_override {
 	int16_t override_port; /* Override port# */
 } __ec_align2;
 
-/* Read (and delete) one entry of PD event log */
+/*
+ * Read (and delete) one entry of PD event log.
+ * TODO(crbug.com/751742): Make this host command more generic to accommodate
+ * future non-PD logs that use the same internal EC event_log.
+ */
 #define EC_CMD_PD_GET_LOG_ENTRY 0x0115
 
 struct ec_response_pd_log {
@@ -4626,6 +4759,60 @@ struct mcdp_info {
 #define MCDP_CHIPID(chipid) ((chipid[0] << 8) | chipid[1])
 #define MCDP_FAMILY(family) ((family[0] << 8) | family[1])
 
+/* Get/Set USB-PD Alternate mode info */
+#define EC_CMD_USB_PD_GET_AMODE 0x0116
+struct ec_params_usb_pd_get_mode_request {
+	uint16_t svid_idx; /* SVID index to get */
+	uint8_t port;      /* port */
+} __ec_align_size1;
+
+struct ec_params_usb_pd_get_mode_response {
+	uint16_t svid;   /* SVID */
+	uint16_t opos;    /* Object Position */
+	uint32_t vdo[6]; /* Mode VDOs */
+} __ec_align4;
+
+#define EC_CMD_USB_PD_SET_AMODE 0x0117
+
+enum pd_mode_cmd {
+	PD_EXIT_MODE = 0,
+	PD_ENTER_MODE = 1,
+	/* Not a command.  Do NOT remove. */
+	PD_MODE_CMD_COUNT,
+};
+
+struct ec_params_usb_pd_set_mode_request {
+	uint32_t cmd;  /* enum pd_mode_cmd */
+	uint16_t svid; /* SVID to set */
+	uint8_t opos;  /* Object Position */
+	uint8_t port;  /* port */
+} __ec_align4;
+
+/* Ask the PD MCU to record a log of a requested type */
+#define EC_CMD_PD_WRITE_LOG_ENTRY 0x0118
+
+struct ec_params_pd_write_log_entry {
+	uint8_t type; /* event type : see PD_EVENT_xx above */
+	uint8_t port; /* port#, or 0 for events unrelated to a given port */
+} __ec_align1;
+
+
+/* Control USB-PD chip */
+#define EC_CMD_PD_CONTROL 0x0119
+
+enum ec_pd_control_cmd {
+	PD_SUSPEND = 0,      /* Suspend the PD chip (EC: stop talking to PD) */
+	PD_RESUME,           /* Resume the PD chip (EC: start talking to PD) */
+	PD_RESET,            /* Force reset the PD chip */
+	PD_CONTROL_DISABLE,  /* Disable further calls to this command */
+	PD_CHIP_ON,          /* Power on the PD chip */
+};
+
+struct ec_params_pd_control {
+	uint8_t chip;         /* chip id */
+	uint8_t subcmd;
+} __ec_align1;
+
 /* Get info about USB-C SS muxes */
 #define EC_CMD_USB_PD_MUX_INFO 0x011A
 
@@ -4638,10 +4825,43 @@ struct ec_params_usb_pd_mux_info {
 #define USB_PD_MUX_DP_ENABLED        BIT(1) /* DP connected */
 #define USB_PD_MUX_POLARITY_INVERTED BIT(2) /* CC line Polarity inverted */
 #define USB_PD_MUX_HPD_IRQ           BIT(3) /* HPD IRQ is asserted */
+#define USB_PD_MUX_HPD_LVL           BIT(4) /* HPD level is asserted */
 
 struct ec_response_usb_pd_mux_info {
 	uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */
 } __ec_align1;
+
+#define EC_CMD_PD_CHIP_INFO		0x011B
+
+struct ec_params_pd_chip_info {
+	uint8_t port;	/* USB-C port number */
+	uint8_t renew;	/* Force renewal */
+} __ec_align1;
+
+struct ec_response_pd_chip_info {
+	uint16_t vendor_id;
+	uint16_t product_id;
+	uint16_t device_id;
+	union {
+		uint8_t fw_version_string[8];
+		uint64_t fw_version_number;
+	};
+} __ec_align2;
+
+struct ec_response_pd_chip_info_v1 {
+	uint16_t vendor_id;
+	uint16_t product_id;
+	uint16_t device_id;
+	union {
+		uint8_t fw_version_string[8];
+		uint64_t fw_version_number;
+	};
+	union {
+		uint8_t min_req_fw_version_string[8];
+		uint64_t min_req_fw_version_number;
+	};
+} __ec_align2;
+
 /*****************************************************************************/
 /*
  * Reserve a range of host commands for board-specific, experimental, or
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 20/30] mfd: cros_ec: Add API for keyboard testing
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (18 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 19/30] mfd: cros_ec: Complete Power and USB PD API Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 21/30] mfd: cros_ec: Add Hibernate API Gwendal Grignou
                   ` (12 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Add command to allow keyboard testing in factory.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index e05cdcb12481..cc054a0a4c4c 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -3142,6 +3142,17 @@ struct ec_params_mkbp_simulate_key {
 	uint8_t pressed;
 } __ec_align1;
 
+#define EC_CMD_GET_KEYBOARD_ID 0x0063
+
+struct ec_response_keyboard_id {
+	uint32_t keyboard_id;
+} __ec_align4;
+
+enum keyboard_id {
+	KEYBOARD_ID_UNSUPPORTED = 0,
+	KEYBOARD_ID_UNREADABLE = 0xffffffff,
+};
+
 /* Configure keyboard scanning */
 #define EC_CMD_MKBP_SET_CONFIG 0x0064
 #define EC_CMD_MKBP_GET_CONFIG 0x0065
@@ -3390,6 +3401,13 @@ struct ec_response_get_next_event_v1 {
 #define EC_MKBP_TABLET_MODE	1
 #define EC_MKBP_BASE_ATTACHED	2
 
+/* Run keyboard factory test scanning */
+#define EC_CMD_KEYBOARD_FACTORY_TEST 0x0068
+
+struct ec_response_keyboard_factory_test {
+	uint16_t shorted;	/* Keyboard pins are shorted */
+} __ec_align2;
+
 /* Fingerprint events in 'fp_events' for EC_MKBP_EVENT_FINGERPRINT */
 #define EC_MKBP_FP_RAW_EVENT(fp_events) ((fp_events) & 0x00FFFFFF)
 #define EC_MKBP_FP_ERRCODE(fp_events)   ((fp_events) & 0x0000000F)
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 21/30] mfd: cros_ec: Add Hibernate API
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (19 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 20/30] mfd: cros_ec: Add API for keyboard testing Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 22/30] mfd: cros_ec: Add Smart Battery Firmware update API Gwendal Grignou
                   ` (11 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Add support for controlling hibernation of the Embedded Controller.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 72 +++++++++++++++++++++++++++-
 1 file changed, 70 insertions(+), 2 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index cc054a0a4c4c..7f98c6e63ad1 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -4045,6 +4045,40 @@ struct ec_params_dedicated_charger_limit {
 	uint16_t voltage_lim; /* in mV */
 } __ec_align2;
 
+/*****************************************************************************/
+/* Hibernate/Deep Sleep Commands */
+
+/* Set the delay before going into hibernation. */
+#define EC_CMD_HIBERNATION_DELAY 0x00A8
+
+struct ec_params_hibernation_delay {
+	/*
+	 * Seconds to wait in G3 before hibernate.  Pass in 0 to read the
+	 * current settings without changing them.
+	 */
+	uint32_t seconds;
+} __ec_align4;
+
+struct ec_response_hibernation_delay {
+	/*
+	 * The current time in seconds in which the system has been in the G3
+	 * state.  This value is reset if the EC transitions out of G3.
+	 */
+	uint32_t time_g3;
+
+	/*
+	 * The current time remaining in seconds until the EC should hibernate.
+	 * This value is also reset if the EC transitions out of G3.
+	 */
+	uint32_t time_remaining;
+
+	/*
+	 * The current time in seconds that the EC should wait in G3 before
+	 * hibernating.
+	 */
+	uint32_t hibernate_delay;
+} __ec_align4;
+
 /* Inform the EC when entering a sleep state */
 #define EC_CMD_HOST_SLEEP_EVENT 0x00A9
 
@@ -4052,7 +4086,9 @@ enum host_sleep_event {
 	HOST_SLEEP_EVENT_S3_SUSPEND   = 1,
 	HOST_SLEEP_EVENT_S3_RESUME    = 2,
 	HOST_SLEEP_EVENT_S0IX_SUSPEND = 3,
-	HOST_SLEEP_EVENT_S0IX_RESUME  = 4
+	HOST_SLEEP_EVENT_S0IX_RESUME  = 4,
+	/* S3 suspend with additional enabled wake sources */
+	HOST_SLEEP_EVENT_S3_WAKEABLE_SUSPEND = 5,
 };
 
 struct ec_params_host_sleep_event {
@@ -4116,6 +4152,36 @@ struct ec_response_host_sleep_event_v1 {
 	};
 } __ec_align4;
 
+/*****************************************************************************/
+/* Device events */
+#define EC_CMD_DEVICE_EVENT 0x00AA
+
+enum ec_device_event {
+	EC_DEVICE_EVENT_TRACKPAD,
+	EC_DEVICE_EVENT_DSP,
+	EC_DEVICE_EVENT_WIFI,
+};
+
+enum ec_device_event_param {
+	/* Get and clear pending device events */
+	EC_DEVICE_EVENT_PARAM_GET_CURRENT_EVENTS,
+	/* Get device event mask */
+	EC_DEVICE_EVENT_PARAM_GET_ENABLED_EVENTS,
+	/* Set device event mask */
+	EC_DEVICE_EVENT_PARAM_SET_ENABLED_EVENTS,
+};
+
+#define EC_DEVICE_EVENT_MASK(event_code) BIT(event_code % 32)
+
+struct ec_params_device_event {
+	uint32_t event_mask;
+	uint8_t param;
+} __ec_align_size1;
+
+struct ec_response_device_event {
+	uint32_t event_mask;
+} __ec_align4;
+
 /*****************************************************************************/
 /* Smart battery pass-through */
 
@@ -4361,12 +4427,14 @@ enum ec_reboot_cmd {
 	/* (command 3 was jump to RW-B) */
 	EC_REBOOT_COLD = 4,          /* Cold-reboot */
 	EC_REBOOT_DISABLE_JUMP = 5,  /* Disable jump until next reboot */
-	EC_REBOOT_HIBERNATE = 6      /* Hibernate EC */
+	EC_REBOOT_HIBERNATE = 6,     /* Hibernate EC */
+	EC_REBOOT_HIBERNATE_CLEAR_AP_OFF = 7, /* and clears AP_OFF flag */
 };
 
 /* Flags for ec_params_reboot_ec.reboot_flags */
 #define EC_REBOOT_FLAG_RESERVED0      BIT(0)  /* Was recovery request */
 #define EC_REBOOT_FLAG_ON_AP_SHUTDOWN BIT(1)  /* Reboot after AP shutdown */
+#define EC_REBOOT_FLAG_SWITCH_RW_SLOT BIT(2)  /* Switch RW slot */
 
 struct ec_params_reboot_ec {
 	uint8_t cmd;           /* enum ec_reboot_cmd */
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 22/30] mfd: cros_ec: Add Smart Battery Firmware update API
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (20 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 21/30] mfd: cros_ec: Add Hibernate API Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 23/30] mfd: cros_ec: Add I2C passthru protection API Gwendal Grignou
                   ` (10 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Add API to update battery firmware.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 73 ++++++++++++++++++++++++++++
 1 file changed, 73 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 7f98c6e63ad1..49ea905cfd18 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -4243,6 +4243,79 @@ struct ec_response_battery_vendor_param {
 	uint32_t value;
 } __ec_align4;
 
+/*****************************************************************************/
+/*
+ * Smart Battery Firmware Update Commands
+ */
+#define EC_CMD_SB_FW_UPDATE 0x00B5
+
+enum ec_sb_fw_update_subcmd {
+	EC_SB_FW_UPDATE_PREPARE  = 0x0,
+	EC_SB_FW_UPDATE_INFO     = 0x1, /*query sb info */
+	EC_SB_FW_UPDATE_BEGIN    = 0x2, /*check if protected */
+	EC_SB_FW_UPDATE_WRITE    = 0x3, /*check if protected */
+	EC_SB_FW_UPDATE_END      = 0x4,
+	EC_SB_FW_UPDATE_STATUS   = 0x5,
+	EC_SB_FW_UPDATE_PROTECT  = 0x6,
+	EC_SB_FW_UPDATE_MAX      = 0x7,
+};
+
+#define SB_FW_UPDATE_CMD_WRITE_BLOCK_SIZE 32
+#define SB_FW_UPDATE_CMD_STATUS_SIZE 2
+#define SB_FW_UPDATE_CMD_INFO_SIZE 8
+
+struct ec_sb_fw_update_header {
+	uint16_t subcmd;  /* enum ec_sb_fw_update_subcmd */
+	uint16_t fw_id;   /* firmware id */
+} __ec_align4;
+
+struct ec_params_sb_fw_update {
+	struct ec_sb_fw_update_header hdr;
+	union {
+		/* EC_SB_FW_UPDATE_PREPARE  = 0x0 */
+		/* EC_SB_FW_UPDATE_INFO     = 0x1 */
+		/* EC_SB_FW_UPDATE_BEGIN    = 0x2 */
+		/* EC_SB_FW_UPDATE_END      = 0x4 */
+		/* EC_SB_FW_UPDATE_STATUS   = 0x5 */
+		/* EC_SB_FW_UPDATE_PROTECT  = 0x6 */
+		/* Those have no args */
+
+		/* EC_SB_FW_UPDATE_WRITE    = 0x3 */
+		struct __ec_align4 {
+			uint8_t  data[SB_FW_UPDATE_CMD_WRITE_BLOCK_SIZE];
+		} write;
+	};
+} __ec_align4;
+
+struct ec_response_sb_fw_update {
+	union {
+		/* EC_SB_FW_UPDATE_INFO     = 0x1 */
+		struct __ec_align1 {
+			uint8_t data[SB_FW_UPDATE_CMD_INFO_SIZE];
+		} info;
+
+		/* EC_SB_FW_UPDATE_STATUS   = 0x5 */
+		struct __ec_align1 {
+			uint8_t data[SB_FW_UPDATE_CMD_STATUS_SIZE];
+		} status;
+	};
+} __ec_align1;
+
+/*
+ * Entering Verified Boot Mode Command
+ * Default mode is VBOOT_MODE_NORMAL if EC did not receive this command.
+ * Valid Modes are: normal, developer, and recovery.
+ */
+#define EC_CMD_ENTERING_MODE 0x00B6
+
+struct ec_params_entering_mode {
+	int vboot_mode;
+} __ec_align4;
+
+#define VBOOT_MODE_NORMAL    0
+#define VBOOT_MODE_DEVELOPER 1
+#define VBOOT_MODE_RECOVERY  2
+
 /*****************************************************************************/
 /*
  * HDMI CEC commands
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 23/30] mfd: cros_ec: Add I2C passthru protection API
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (21 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 22/30] mfd: cros_ec: Add Smart Battery Firmware update API Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 24/30] mfd: cros_ec: Add API for EC-EC communication Gwendal Grignou
                   ` (9 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Prevent direct i2c access to device behind EC when not in development mode.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 49ea905cfd18..59ad6bae3f9b 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -4316,6 +4316,28 @@ struct ec_params_entering_mode {
 #define VBOOT_MODE_DEVELOPER 1
 #define VBOOT_MODE_RECOVERY  2
 
+/*****************************************************************************/
+/*
+ * I2C passthru protection command: Protects I2C tunnels against access on
+ * certain addresses (board-specific).
+ */
+#define EC_CMD_I2C_PASSTHRU_PROTECT 0x00B7
+
+enum ec_i2c_passthru_protect_subcmd {
+	EC_CMD_I2C_PASSTHRU_PROTECT_STATUS = 0x0,
+	EC_CMD_I2C_PASSTHRU_PROTECT_ENABLE = 0x1,
+};
+
+struct ec_params_i2c_passthru_protect {
+	uint8_t subcmd;
+	uint8_t port;		/* I2C port number */
+} __ec_align1;
+
+struct ec_response_i2c_passthru_protect {
+	uint8_t status;		/* Status flags (0: unlocked, 1: locked) */
+} __ec_align1;
+
+
 /*****************************************************************************/
 /*
  * HDMI CEC commands
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 24/30] mfd: cros_ec: Add API for EC-EC communication
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (22 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 23/30] mfd: cros_ec: Add I2C passthru protection API Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 25/30] mfd: cros_ec: Add API for Touchpad support Gwendal Grignou
                   ` (8 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Allow EC to talk to other ECs that are not presented to the host.
Neeed when EC are present in detachable keyboard.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 95 ++++++++++++++++++++++++++++
 1 file changed, 95 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 59ad6bae3f9b..52fd9bfafc7f 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -5043,6 +5043,101 @@ struct ec_response_pd_chip_info_v1 {
 	};
 } __ec_align2;
 
+/*****************************************************************************/
+/* EC-EC communication commands: range 0x0600-0x06FF */
+
+#define EC_COMM_TEXT_MAX 8
+
+/*
+ * Get battery static information, i.e. information that never changes, or
+ * very infrequently.
+ */
+#define EC_CMD_BATTERY_GET_STATIC 0x0600
+
+/**
+ * struct ec_params_battery_static_info - Battery static info parameters
+ * @index: Battery index.
+ */
+struct ec_params_battery_static_info {
+	uint8_t index;
+} __ec_align_size1;
+
+/**
+ * struct ec_response_battery_static_info - Battery static info response
+ * @design_capacity: Battery Design Capacity (mAh)
+ * @design_voltage: Battery Design Voltage (mV)
+ * @manufacturer: Battery Manufacturer String
+ * @model: Battery Model Number String
+ * @serial: Battery Serial Number String
+ * @type: Battery Type String
+ * @cycle_count: Battery Cycle Count
+ */
+struct ec_response_battery_static_info {
+	uint16_t design_capacity;
+	uint16_t design_voltage;
+	char manufacturer[EC_COMM_TEXT_MAX];
+	char model[EC_COMM_TEXT_MAX];
+	char serial[EC_COMM_TEXT_MAX];
+	char type[EC_COMM_TEXT_MAX];
+	/* TODO(crbug.com/795991): Consider moving to dynamic structure. */
+	uint32_t cycle_count;
+} __ec_align4;
+
+/*
+ * Get battery dynamic information, i.e. information that is likely to change
+ * every time it is read.
+ */
+#define EC_CMD_BATTERY_GET_DYNAMIC 0x0601
+
+/**
+ * struct ec_params_battery_dynamic_info - Battery dynamic info parameters
+ * @index: Battery index.
+ */
+struct ec_params_battery_dynamic_info {
+	uint8_t index;
+} __ec_align_size1;
+
+/**
+ * struct ec_response_battery_dynamic_info - Battery dynamic info response
+ * @actual_voltage: Battery voltage (mV)
+ * @actual_current: Battery current (mA); negative=discharging
+ * @remaining_capacity: Remaining capacity (mAh)
+ * @full_capacity: Capacity (mAh, might change occasionally)
+ * @flags: Flags, see EC_BATT_FLAG_*
+ * @desired_voltage: Charging voltage desired by battery (mV)
+ * @desired_current: Charging current desired by battery (mA)
+ */
+struct ec_response_battery_dynamic_info {
+	int16_t actual_voltage;
+	int16_t actual_current;
+	int16_t remaining_capacity;
+	int16_t full_capacity;
+	int16_t flags;
+	int16_t desired_voltage;
+	int16_t desired_current;
+} __ec_align2;
+
+/*
+ * Control charger chip. Used to control charger chip on the slave.
+ */
+#define EC_CMD_CHARGER_CONTROL 0x0602
+
+/**
+ * struct ec_params_charger_control - Charger control parameters
+ * @max_current: Charger current (mA). Positive to allow base to draw up to
+ *     max_current and (possibly) charge battery, negative to request current
+ *     from base (OTG).
+ * @otg_voltage: Voltage (mV) to use in OTG mode, ignored if max_current is
+ *     >= 0.
+ * @allow_charging: Allow base battery charging (only makes sense if
+ *     max_current > 0).
+ */
+struct ec_params_charger_control {
+	int16_t max_current;
+	uint16_t otg_voltage;
+	uint8_t allow_charging;
+} __ec_align_size1;
+
 /*****************************************************************************/
 /*
  * Reserve a range of host commands for board-specific, experimental, or
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 25/30] mfd: cros_ec: Add API for Touchpad support
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (23 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 24/30] mfd: cros_ec: Add API for EC-EC communication Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 26/30] mfd: cros_ec: Add API for Fingerprint support Gwendal Grignou
                   ` (7 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Add API to control touchpad presented by Embedded Controller.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 52fd9bfafc7f..1d0311df44d3 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -5043,6 +5043,32 @@ struct ec_response_pd_chip_info_v1 {
 	};
 } __ec_align2;
 
+/*****************************************************************************/
+/* Touchpad MCU commands: range 0x0500-0x05FF */
+
+/* Perform touchpad self test */
+#define EC_CMD_TP_SELF_TEST 0x0500
+
+/* Get number of frame types, and the size of each type */
+#define EC_CMD_TP_FRAME_INFO 0x0501
+
+struct ec_response_tp_frame_info {
+	uint32_t n_frames;
+	uint32_t frame_sizes[0];
+} __ec_align4;
+
+/* Create a snapshot of current frame readings */
+#define EC_CMD_TP_FRAME_SNAPSHOT 0x0502
+
+/* Read the frame */
+#define EC_CMD_TP_FRAME_GET 0x0503
+
+struct ec_params_tp_frame_get {
+	uint32_t frame_index;
+	uint32_t offset;
+	uint32_t size;
+} __ec_align4;
+
 /*****************************************************************************/
 /* EC-EC communication commands: range 0x0600-0x06FF */
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 26/30] mfd: cros_ec: Add API for Fingerprint support
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (24 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 25/30] mfd: cros_ec: Add API for Touchpad support Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 27/30] mfd: cros_ec: Add API for rwsig Gwendal Grignou
                   ` (6 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Add API for fingerprint sensor presented by embedded controller.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 228 +++++++++++++++++++++++++++
 1 file changed, 228 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 1d0311df44d3..4a9ac3861bdd 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -5043,6 +5043,234 @@ struct ec_response_pd_chip_info_v1 {
 	};
 } __ec_align2;
 
+/*****************************************************************************/
+/* Fingerprint MCU commands: range 0x0400-0x040x */
+
+/* Fingerprint SPI sensor passthru command: prototyping ONLY */
+#define EC_CMD_FP_PASSTHRU 0x0400
+
+#define EC_FP_FLAG_NOT_COMPLETE 0x1
+
+struct ec_params_fp_passthru {
+	uint16_t len;		/* Number of bytes to write then read */
+	uint16_t flags;		/* EC_FP_FLAG_xxx */
+	uint8_t data[];		/* Data to send */
+} __ec_align2;
+
+/* Configure the Fingerprint MCU behavior */
+#define EC_CMD_FP_MODE 0x0402
+
+/* Put the sensor in its lowest power mode */
+#define FP_MODE_DEEPSLEEP      BIT(0)
+/* Wait to see a finger on the sensor */
+#define FP_MODE_FINGER_DOWN    BIT(1)
+/* Poll until the finger has left the sensor */
+#define FP_MODE_FINGER_UP      BIT(2)
+/* Capture the current finger image */
+#define FP_MODE_CAPTURE        BIT(3)
+/* Finger enrollment session on-going */
+#define FP_MODE_ENROLL_SESSION BIT(4)
+/* Enroll the current finger image */
+#define FP_MODE_ENROLL_IMAGE   BIT(5)
+/* Try to match the current finger image */
+#define FP_MODE_MATCH          BIT(6)
+/* Reset and re-initialize the sensor. */
+#define FP_MODE_RESET_SENSOR   BIT(7)
+/* special value: don't change anything just read back current mode */
+#define FP_MODE_DONT_CHANGE    BIT(31)
+
+#define FP_VALID_MODES (FP_MODE_DEEPSLEEP      | \
+			FP_MODE_FINGER_DOWN    | \
+			FP_MODE_FINGER_UP      | \
+			FP_MODE_CAPTURE        | \
+			FP_MODE_ENROLL_SESSION | \
+			FP_MODE_ENROLL_IMAGE   | \
+			FP_MODE_MATCH          | \
+			FP_MODE_RESET_SENSOR   | \
+			FP_MODE_DONT_CHANGE)
+
+/* Capture types defined in bits [30..28] */
+#define FP_MODE_CAPTURE_TYPE_SHIFT 28
+#define FP_MODE_CAPTURE_TYPE_MASK  (0x7 << FP_MODE_CAPTURE_TYPE_SHIFT)
+/*
+ * This enum must remain ordered, if you add new values you must ensure that
+ * FP_CAPTURE_TYPE_MAX is still the last one.
+ */
+enum fp_capture_type {
+	/* Full blown vendor-defined capture (produces 'frame_size' bytes) */
+	FP_CAPTURE_VENDOR_FORMAT = 0,
+	/* Simple raw image capture (produces width x height x bpp bits) */
+	FP_CAPTURE_SIMPLE_IMAGE = 1,
+	/* Self test pattern (e.g. checkerboard) */
+	FP_CAPTURE_PATTERN0 = 2,
+	/* Self test pattern (e.g. inverted checkerboard) */
+	FP_CAPTURE_PATTERN1 = 3,
+	/* Capture for Quality test with fixed contrast */
+	FP_CAPTURE_QUALITY_TEST = 4,
+	/* Capture for pixel reset value test */
+	FP_CAPTURE_RESET_TEST = 5,
+	FP_CAPTURE_TYPE_MAX,
+};
+/* Extracts the capture type from the sensor 'mode' word */
+#define FP_CAPTURE_TYPE(mode) (((mode) & FP_MODE_CAPTURE_TYPE_MASK) \
+				       >> FP_MODE_CAPTURE_TYPE_SHIFT)
+
+struct ec_params_fp_mode {
+	uint32_t mode; /* as defined by FP_MODE_ constants */
+} __ec_align4;
+
+struct ec_response_fp_mode {
+	uint32_t mode; /* as defined by FP_MODE_ constants */
+} __ec_align4;
+
+/* Retrieve Fingerprint sensor information */
+#define EC_CMD_FP_INFO 0x0403
+
+/* Number of dead pixels detected on the last maintenance */
+#define FP_ERROR_DEAD_PIXELS(errors) ((errors) & 0x3FF)
+/* Unknown number of dead pixels detected on the last maintenance */
+#define FP_ERROR_DEAD_PIXELS_UNKNOWN (0x3FF)
+/* No interrupt from the sensor */
+#define FP_ERROR_NO_IRQ    BIT(12)
+/* SPI communication error */
+#define FP_ERROR_SPI_COMM  BIT(13)
+/* Invalid sensor Hardware ID */
+#define FP_ERROR_BAD_HWID  BIT(14)
+/* Sensor initialization failed */
+#define FP_ERROR_INIT_FAIL BIT(15)
+
+struct ec_response_fp_info_v0 {
+	/* Sensor identification */
+	uint32_t vendor_id;
+	uint32_t product_id;
+	uint32_t model_id;
+	uint32_t version;
+	/* Image frame characteristics */
+	uint32_t frame_size;
+	uint32_t pixel_format; /* using V4L2_PIX_FMT_ */
+	uint16_t width;
+	uint16_t height;
+	uint16_t bpp;
+	uint16_t errors; /* see FP_ERROR_ flags above */
+} __ec_align4;
+
+struct ec_response_fp_info {
+	/* Sensor identification */
+	uint32_t vendor_id;
+	uint32_t product_id;
+	uint32_t model_id;
+	uint32_t version;
+	/* Image frame characteristics */
+	uint32_t frame_size;
+	uint32_t pixel_format; /* using V4L2_PIX_FMT_ */
+	uint16_t width;
+	uint16_t height;
+	uint16_t bpp;
+	uint16_t errors; /* see FP_ERROR_ flags above */
+	/* Template/finger current information */
+	uint32_t template_size;  /* max template size in bytes */
+	uint16_t template_max;   /* maximum number of fingers/templates */
+	uint16_t template_valid; /* number of valid fingers/templates */
+	uint32_t template_dirty; /* bitmap of templates with MCU side changes */
+	uint32_t template_version; /* version of the template format */
+} __ec_align4;
+
+/* Get the last captured finger frame or a template content */
+#define EC_CMD_FP_FRAME 0x0404
+
+/* constants defining the 'offset' field which also contains the frame index */
+#define FP_FRAME_INDEX_SHIFT       28
+/* Frame buffer where the captured image is stored */
+#define FP_FRAME_INDEX_RAW_IMAGE    0
+/* First frame buffer holding a template */
+#define FP_FRAME_INDEX_TEMPLATE     1
+#define FP_FRAME_GET_BUFFER_INDEX(offset) ((offset) >> FP_FRAME_INDEX_SHIFT)
+#define FP_FRAME_OFFSET_MASK       0x0FFFFFFF
+
+/* Version of the format of the encrypted templates. */
+#define FP_TEMPLATE_FORMAT_VERSION 3
+
+/* Constants for encryption parameters */
+#define FP_CONTEXT_NONCE_BYTES 12
+#define FP_CONTEXT_USERID_WORDS (32 / sizeof(uint32_t))
+#define FP_CONTEXT_TAG_BYTES 16
+#define FP_CONTEXT_SALT_BYTES 16
+#define FP_CONTEXT_TPM_BYTES 32
+
+struct ec_fp_template_encryption_metadata {
+	/*
+	 * Version of the structure format (N=3).
+	 */
+	uint16_t struct_version;
+	/* Reserved bytes, set to 0. */
+	uint16_t reserved;
+	/*
+	 * The salt is *only* ever used for key derivation. The nonce is unique,
+	 * a different one is used for every message.
+	 */
+	uint8_t nonce[FP_CONTEXT_NONCE_BYTES];
+	uint8_t salt[FP_CONTEXT_SALT_BYTES];
+	uint8_t tag[FP_CONTEXT_TAG_BYTES];
+};
+
+struct ec_params_fp_frame {
+	/*
+	 * The offset contains the template index or FP_FRAME_INDEX_RAW_IMAGE
+	 * in the high nibble, and the real offset within the frame in
+	 * FP_FRAME_OFFSET_MASK.
+	 */
+	uint32_t offset;
+	uint32_t size;
+} __ec_align4;
+
+/* Load a template into the MCU */
+#define EC_CMD_FP_TEMPLATE 0x0405
+
+/* Flag in the 'size' field indicating that the full template has been sent */
+#define FP_TEMPLATE_COMMIT 0x80000000
+
+struct ec_params_fp_template {
+	uint32_t offset;
+	uint32_t size;
+	uint8_t data[];
+} __ec_align4;
+
+/* Clear the current fingerprint user context and set a new one */
+#define EC_CMD_FP_CONTEXT 0x0406
+
+struct ec_params_fp_context {
+	uint32_t userid[FP_CONTEXT_USERID_WORDS];
+} __ec_align4;
+
+#define EC_CMD_FP_STATS 0x0407
+
+#define FPSTATS_CAPTURE_INV  BIT(0)
+#define FPSTATS_MATCHING_INV BIT(1)
+
+struct ec_response_fp_stats {
+	uint32_t capture_time_us;
+	uint32_t matching_time_us;
+	uint32_t overall_time_us;
+	struct {
+		uint32_t lo;
+		uint32_t hi;
+	} overall_t0;
+	uint8_t timestamps_invalid;
+	int8_t template_matched;
+} __ec_align2;
+
+#define EC_CMD_FP_SEED 0x0408
+struct ec_params_fp_seed {
+	/*
+	 * Version of the structure format (N=3).
+	 */
+	uint16_t struct_version;
+	/* Reserved bytes, set to 0. */
+	uint16_t reserved;
+	/* Seed from the TPM. */
+	uint8_t seed[FP_CONTEXT_TPM_BYTES];
+} __ec_align4;
+
 /*****************************************************************************/
 /* Touchpad MCU commands: range 0x0500-0x05FF */
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 27/30] mfd: cros_ec: Add API for rwsig
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (25 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 26/30] mfd: cros_ec: Add API for Fingerprint support Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 28/30] mfd: cros_ec: Add SKU ID and Secure storage API Gwendal Grignou
                   ` (5 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Add command to retrieve signature of image stored in the RW memory
slot(s).

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 4a9ac3861bdd..3d3a37b11002 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -5043,6 +5043,32 @@ struct ec_response_pd_chip_info_v1 {
 	};
 } __ec_align2;
 
+/* Run RW signature verification and get status */
+#define EC_CMD_RWSIG_CHECK_STATUS	0x011C
+
+struct ec_response_rwsig_check_status {
+	uint32_t status;
+} __ec_align4;
+
+/* For controlling RWSIG task */
+#define EC_CMD_RWSIG_ACTION	0x011D
+
+enum rwsig_action {
+	RWSIG_ACTION_ABORT = 0,		/* Abort RWSIG and prevent jumping */
+	RWSIG_ACTION_CONTINUE = 1,	/* Jump to RW immediately */
+};
+
+struct ec_params_rwsig_action {
+	uint32_t action;
+} __ec_align4;
+
+/* Run verification on a slot */
+#define EC_CMD_EFS_VERIFY	0x011E
+
+struct ec_params_efs_verify {
+	uint8_t region;		/* enum ec_flash_region */
+} __ec_align1;
+
 /*****************************************************************************/
 /* Fingerprint MCU commands: range 0x0400-0x040x */
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 28/30] mfd: cros_ec: Add SKU ID and Secure storage API
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (26 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 27/30] mfd: cros_ec: Add API for rwsig Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 29/30] mfd: cros_ec: Add Management API entry points Gwendal Grignou
                   ` (4 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Add API to store SKU, Cros board information in EC flash memory.
Add API to store security data in EC.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 107 +++++++++++++++++++++++++++
 1 file changed, 107 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 3d3a37b11002..860a76274334 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1292,6 +1292,17 @@ struct ec_response_get_features {
 	uint32_t flags[2];
 } __ec_align4;
 
+/*****************************************************************************/
+/* Get the board's SKU ID from EC */
+#define EC_CMD_GET_SKU_ID 0x000E
+
+/* Set SKU ID from AP */
+#define EC_CMD_SET_SKU_ID 0x000F
+
+struct ec_sku_id_info {
+	uint32_t sku_id;
+} __ec_align4;
+
 /*****************************************************************************/
 /* Flash commands */
 
@@ -2902,6 +2913,49 @@ struct ec_response_port80_last_boot {
 	uint16_t code;
 } __ec_align2;
 
+/*****************************************************************************/
+/* Temporary secure storage for host verified boot use */
+
+/* Number of bytes in a vstore slot */
+#define EC_VSTORE_SLOT_SIZE 64
+
+/* Maximum number of vstore slots */
+#define EC_VSTORE_SLOT_MAX 32
+
+/* Get persistent storage info */
+#define EC_CMD_VSTORE_INFO 0x0049
+struct ec_response_vstore_info {
+	/* Indicates which slots are locked */
+	uint32_t slot_locked;
+	/* Total number of slots available */
+	uint8_t slot_count;
+} __ec_align_size1;
+
+/*
+ * Read temporary secure storage
+ *
+ * Response is EC_VSTORE_SLOT_SIZE bytes of data.
+ */
+#define EC_CMD_VSTORE_READ 0x004A
+
+struct ec_params_vstore_read {
+	uint8_t slot; /* Slot to read from */
+} __ec_align1;
+
+struct ec_response_vstore_read {
+	uint8_t data[EC_VSTORE_SLOT_SIZE];
+} __ec_align1;
+
+/*
+ * Write temporary secure storage and lock it.
+ */
+#define EC_CMD_VSTORE_WRITE 0x004B
+
+struct ec_params_vstore_write {
+	uint8_t slot; /* Slot to write to */
+	uint8_t data[EC_VSTORE_SLOT_SIZE];
+} __ec_align1;
+
 /*****************************************************************************/
 /* Thermal engine commands. Note that there are two implementations. We'll
  * reuse the command number, but the data and behavior is incompatible.
@@ -5069,6 +5123,59 @@ struct ec_params_efs_verify {
 	uint8_t region;		/* enum ec_flash_region */
 } __ec_align1;
 
+/*
+ * Retrieve info from Cros Board Info store. Response is based on the data
+ * type. Integers return a uint32. Strings return a string, using the response
+ * size to determine how big it is.
+ */
+#define EC_CMD_GET_CROS_BOARD_INFO	0x011F
+/*
+ * Write info into Cros Board Info on EEPROM. Write fails if the board has
+ * hardware write-protect enabled.
+ */
+#define EC_CMD_SET_CROS_BOARD_INFO	0x0120
+
+enum cbi_data_tag {
+	CBI_TAG_BOARD_VERSION = 0, /* uint32_t or smaller */
+	CBI_TAG_OEM_ID = 1,        /* uint32_t or smaller */
+	CBI_TAG_SKU_ID = 2,        /* uint32_t or smaller */
+	CBI_TAG_DRAM_PART_NUM = 3, /* variable length ascii, nul terminated. */
+	CBI_TAG_OEM_NAME = 4,      /* variable length ascii, nul terminated. */
+	CBI_TAG_MODEL_ID = 5,      /* uint32_t or smaller */
+	CBI_TAG_COUNT,
+};
+
+/*
+ * Flags to control read operation
+ *
+ * RELOAD:  Invalidate cache and read data from EEPROM. Useful to verify
+ *          write was successful without reboot.
+ */
+#define CBI_GET_RELOAD		BIT(0)
+
+struct ec_params_get_cbi {
+	uint32_t tag;		/* enum cbi_data_tag */
+	uint32_t flag;		/* CBI_GET_* */
+} __ec_align4;
+
+/*
+ * Flags to control write behavior.
+ *
+ * NO_SYNC: Makes EC update data in RAM but skip writing to EEPROM. It's
+ *          useful when writing multiple fields in a row.
+ * INIT:    Need to be set when creating a new CBI from scratch. All fields
+ *          will be initialized to zero first.
+ */
+#define CBI_SET_NO_SYNC		BIT(0)
+#define CBI_SET_INIT		BIT(1)
+
+struct ec_params_set_cbi {
+	uint32_t tag;		/* enum cbi_data_tag */
+	uint32_t flag;		/* CBI_SET_* */
+	uint32_t size;		/* Data size */
+	uint8_t data[];		/* For string and raw data */
+} __ec_align1;
+
 /*****************************************************************************/
 /* Fingerprint MCU commands: range 0x0400-0x040x */
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 29/30] mfd: cros_ec: Add Management API entry points
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (27 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 28/30] mfd: cros_ec: Add SKU ID and Secure storage API Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-09 21:13 ` [PATCH v3 30/30] mfd: cros_ec: Update I2S API Gwendal Grignou
                   ` (3 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Add commands for test and management.
Add command space for future development.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 113 +++++++++++++++++++++++++++
 1 file changed, 113 insertions(+)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 860a76274334..fc8babce1576 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -5176,6 +5176,119 @@ struct ec_params_set_cbi {
 	uint8_t data[];		/* For string and raw data */
 } __ec_align1;
 
+/*
+ * Information about resets of the AP by the EC and the EC's own uptime.
+ */
+#define EC_CMD_GET_UPTIME_INFO 0x0121
+
+struct ec_response_uptime_info {
+	/*
+	 * Number of milliseconds since the last EC boot. Sysjump resets
+	 * typically do not restart the EC's time_since_boot epoch.
+	 *
+	 * WARNING: The EC's sense of time is much less accurate than the AP's
+	 * sense of time, in both phase and frequency.  This timebase is similar
+	 * to CLOCK_MONOTONIC_RAW, but with 1% or more frequency error.
+	 */
+	uint32_t time_since_ec_boot_ms;
+
+	/*
+	 * Number of times the AP was reset by the EC since the last EC boot.
+	 * Note that the AP may be held in reset by the EC during the initial
+	 * boot sequence, such that the very first AP boot may count as more
+	 * than one here.
+	 */
+	uint32_t ap_resets_since_ec_boot;
+
+	/*
+	 * The set of flags which describe the EC's most recent reset.  See
+	 * include/system.h RESET_FLAG_* for details.
+	 */
+	uint32_t ec_reset_flags;
+
+	/* Empty log entries have both the cause and timestamp set to zero. */
+	struct ap_reset_log_entry {
+		/*
+		 * See include/chipset.h: enum chipset_{reset,shutdown}_reason
+		 * for details.
+		 */
+		uint16_t reset_cause;
+
+		/* Reserved for protocol growth. */
+		uint16_t reserved;
+
+		/*
+		 * The time of the reset's assertion, in milliseconds since the
+		 * last EC boot, in the same epoch as time_since_ec_boot_ms.
+		 * Set to zero if the log entry is empty.
+		 */
+		uint32_t reset_time_ms;
+	} recent_ap_reset[4];
+} __ec_align4;
+
+/*
+ * Add entropy to the device secret (stored in the rollback region).
+ *
+ * Depending on the chip, the operation may take a long time (e.g. to erase
+ * flash), so the commands are asynchronous.
+ */
+#define EC_CMD_ADD_ENTROPY	0x0122
+
+enum add_entropy_action {
+	/* Add entropy to the current secret. */
+	ADD_ENTROPY_ASYNC = 0,
+	/*
+	 * Add entropy, and also make sure that the previous secret is erased.
+	 * (this can be implemented by adding entropy multiple times until
+	 * all rolback blocks have been overwritten).
+	 */
+	ADD_ENTROPY_RESET_ASYNC = 1,
+	/* Read back result from the previous operation. */
+	ADD_ENTROPY_GET_RESULT = 2,
+};
+
+struct ec_params_rollback_add_entropy {
+	uint8_t action;
+} __ec_align1;
+
+/*
+ * Perform a single read of a given ADC channel.
+ */
+#define EC_CMD_ADC_READ		0x0123
+
+struct ec_params_adc_read {
+	uint8_t adc_channel;
+} __ec_align1;
+
+struct ec_response_adc_read {
+	int32_t adc_value;
+} __ec_align4;
+
+/*
+ * Read back rollback info
+ */
+#define EC_CMD_ROLLBACK_INFO		0x0124
+
+struct ec_response_rollback_info {
+	int32_t id; /* Incrementing number to indicate which region to use. */
+	int32_t rollback_min_version;
+	int32_t rw_rollback_version;
+} __ec_align4;
+
+
+/* Issue AP reset */
+#define EC_CMD_AP_RESET 0x0125
+
+/*****************************************************************************/
+/* The command range 0x200-0x2FF is reserved for Rotor. */
+
+/*****************************************************************************/
+/*
+ * Reserve a range of host commands for the CR51 firmware.
+ */
+#define EC_CMD_CR51_BASE 0x0300
+#define EC_CMD_CR51_LAST 0x03FF
+
 /*****************************************************************************/
 /* Fingerprint MCU commands: range 0x0400-0x040x */
 
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH v3 30/30] mfd: cros_ec: Update I2S API
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (28 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 29/30] mfd: cros_ec: Add Management API entry points Gwendal Grignou
@ 2019-05-09 21:13 ` Gwendal Grignou
  2019-05-17 22:48 ` [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (2 subsequent siblings)
  32 siblings, 0 replies; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-09 21:13 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23, broonie,
	cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel, Gwendal Grignou

Improve I2S API.
Rename ec_response_codec_gain into ec_codec_i2s_gain,
update caller accordlingly.

Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
 include/linux/mfd/cros_ec_commands.h | 44 +++++++++++++---------------
 sound/soc/codecs/cros_ec_codec.c     |  8 ++---
 2 files changed, 24 insertions(+), 28 deletions(-)

diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index fc8babce1576..fa397722f17e 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -4471,6 +4471,7 @@ enum mkbp_cec_event {
 /* Commands for I2S recording on audio codec. */
 
 #define EC_CMD_CODEC_I2S 0x00BC
+#define EC_WOV_I2S_SAMPLE_RATE 48000
 
 enum ec_codec_i2s_subcmd {
 	EC_CODEC_SET_SAMPLE_DEPTH = 0x0,
@@ -4480,6 +4481,7 @@ enum ec_codec_i2s_subcmd {
 	EC_CODEC_I2S_SET_CONFIG = 0x4,
 	EC_CODEC_I2S_SET_TDM_CONFIG = 0x5,
 	EC_CODEC_I2S_SET_BCLK = 0x6,
+	EC_CODEC_I2S_SUBCMD_COUNT = 0x7,
 };
 
 enum ec_sample_depth_value {
@@ -4496,6 +4498,21 @@ enum ec_i2s_config {
 	EC_DAI_FMT_PCM_TDM = 5,
 };
 
+/*
+ * For subcommand EC_CODEC_GET_GAIN.
+ */
+struct __ec_align1 ec_codec_i2s_gain {
+	uint8_t left;
+	uint8_t right;
+};
+
+struct __ec_todo_unpacked ec_param_codec_i2s_tdm {
+	int16_t ch0_delay; /* 0 to 496 */
+	int16_t ch1_delay; /* -1 to 496 */
+	uint8_t adjacent_to_ch0;
+	uint8_t adjacent_to_ch1;
+};
+
 struct __ec_todo_packed ec_param_codec_i2s {
 	/* enum ec_codec_i2s_subcmd */
 	uint8_t cmd;
@@ -4510,10 +4527,7 @@ struct __ec_todo_packed ec_param_codec_i2s {
 		 * EC_CODEC_SET_GAIN
 		 * Value should be 0~43 for both channels.
 		 */
-		struct __ec_align1 ec_param_codec_i2s_set_gain {
-			uint8_t left;
-			uint8_t right;
-		} gain;
+		struct ec_codec_i2s_gain gain;
 
 		/*
 		 * EC_CODEC_I2S_ENABLE
@@ -4522,7 +4536,7 @@ struct __ec_todo_packed ec_param_codec_i2s {
 		uint8_t i2s_enable;
 
 		/*
-		 * EC_CODEC_I2S_SET_COFNIG
+		 * EC_CODEC_I2S_SET_CONFIG
 		 * Value should be one of ec_i2s_config.
 		 */
 		uint8_t i2s_config;
@@ -4531,18 +4545,7 @@ struct __ec_todo_packed ec_param_codec_i2s {
 		 * EC_CODEC_I2S_SET_TDM_CONFIG
 		 * Value should be one of ec_i2s_config.
 		 */
-		struct __ec_todo_unpacked ec_param_codec_i2s_tdm {
-			/*
-			 * 0 to 496
-			 */
-			int16_t ch0_delay;
-			/*
-			 * -1 to 496
-			 */
-			int16_t ch1_delay;
-			uint8_t adjacent_to_ch0;
-			uint8_t adjacent_to_ch1;
-		} tdm_param;
+		struct ec_param_codec_i2s_tdm tdm_param;
 
 		/*
 		 * EC_CODEC_I2S_SET_BCLK
@@ -4551,13 +4554,6 @@ struct __ec_todo_packed ec_param_codec_i2s {
 	};
 };
 
-/*
- * For subcommand EC_CODEC_GET_GAIN.
- */
-struct ec_response_codec_gain {
-	uint8_t left;
-	uint8_t right;
-} __ec_align1;
 
 /*****************************************************************************/
 /* System commands */
diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c
index 99a3af8a15ff..87830ed5ebf4 100644
--- a/sound/soc/codecs/cros_ec_codec.c
+++ b/sound/soc/codecs/cros_ec_codec.c
@@ -38,21 +38,21 @@ static const DECLARE_TLV_DB_SCALE(ec_mic_gain_tlv, 0, 100, 0);
 
 static int ec_command_get_gain(struct snd_soc_component *component,
 			       struct ec_param_codec_i2s *param,
-			       struct ec_response_codec_gain *resp)
+			       struct ec_codec_i2s_gain *resp)
 {
 	struct cros_ec_codec_data *codec_data =
 		snd_soc_component_get_drvdata(component);
 	struct cros_ec_device *ec_device = codec_data->ec_device;
 	u8 buffer[sizeof(struct cros_ec_command) +
 		  max(sizeof(struct ec_param_codec_i2s),
-		      sizeof(struct ec_response_codec_gain))];
+		      sizeof(struct ec_codec_i2s_gain))];
 	struct cros_ec_command *msg = (struct cros_ec_command *)&buffer;
 	int ret;
 
 	msg->version = 0;
 	msg->command = EC_CMD_CODEC_I2S;
 	msg->outsize = sizeof(struct ec_param_codec_i2s);
-	msg->insize = sizeof(struct ec_response_codec_gain);
+	msg->insize = sizeof(struct ec_codec_i2s_gain);
 
 	memcpy(msg->data, param, msg->outsize);
 
@@ -226,7 +226,7 @@ static int get_ec_mic_gain(struct snd_soc_component *component,
 			   u8 *left, u8 *right)
 {
 	struct ec_param_codec_i2s param;
-	struct ec_response_codec_gain resp;
+	struct ec_codec_i2s_gain resp;
 	int ret;
 
 	param.cmd = EC_CODEC_GET_GAIN;
-- 
2.21.0.1020.gf2820cf01a-goog


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* Re: [PATCH v3 00/30] Update cros_ec_commands.h
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (29 preceding siblings ...)
  2019-05-09 21:13 ` [PATCH v3 30/30] mfd: cros_ec: Update I2S API Gwendal Grignou
@ 2019-05-17 22:48 ` Gwendal Grignou
  2019-05-18  6:39   ` Lee Jones
  2019-05-21 13:45 ` [alsa-devel] " Fabien Lahoudere
  2019-06-03 12:53 ` Lee Jones
  32 siblings, 1 reply; 38+ messages in thread
From: Gwendal Grignou @ 2019-05-17 22:48 UTC (permalink / raw)
  To: Enric Balletbo i Serra, Benson Leung, Guenter Roeck, Lee Jones,
	Jonathan Cameron, Mark Brown, Cheng-Yi Chiang, Takashi Iwai
  Cc: linux-iio, alsa-devel, linux-kernel

Lee,

I verified and merged the changes on the kernels (3.18, 4.4 and 4.14)
used on chromebook using a squashed version of these patches.
(crrev.com/c/1583322, crrev.com/c/1583385, crrev.com/c/1583321
respectively)
Please let me know if you have any questions.

Thanks,

Gwendal.

On Thu, May 9, 2019 at 2:14 PM Gwendal Grignou <gwendal@chromium.org> wrote:
>
> The interface between CrosEC embedded controller and the host,
> described by cros_ec_commands.h, as diverged from what the embedded
> controller really support.
>
> The source of thruth is at
> https://chromium.googlesource.com/chromiumos/platform/ec/+/master/include/ec_commands.h
>
> That include file is converted to remove ACPI and Embedded only code.
>
> From now on, cros_ec_commands.h will be automatically generated from
> the file above, do not modify directly.
>
> Fell free to squash the commits below.
>
> Changes in v3:
> - Rebase after commit 81888d8ab1532 ("mfd: cros_ec: Update the EC feature codes")
> - Add Acked-by: Benson Leung <bleung@chromium.org>
>
> Changes in v2:
> - Move I2S changes at the end of the patchset, squashed with change in
>   sound/soc/codecs/cros_ec_codec.c to match new interface.
> - Add Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
>
> Gwendal Grignou (30):
>   mfd: cros_ec: Update license term
>   mfd: cros_ec: Zero BUILD_ macro
>   mfd: cros_ec: set comments properly
>   mfd: cros_ec: add ec_align macros
>   mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values
>   mfd: cros_ec: use BIT macro
>   mfd: cros_ec: Update ACPI interface definition
>   mfd: cros_ec: move HDMI CEC API definition
>   mfd: cros_ec: Remove zero-size structs
>   mfd: cros_ec: Add Flash V2 commands API
>   mfd: cros_ec: Add PWM_SET_DUTY API
>   mfd: cros_ec: Add lightbar v2 API
>   mfd: cros_ec: Expand hash API
>   mfd: cros_ec: Add EC transport protocol v4
>   mfd: cros_ec: Complete MEMS sensor API
>   mfd: cros_ec: Fix event processing API
>   mfd: cros_ec: Add fingerprint API
>   mfd: cros_ec: Fix temperature API
>   mfd: cros_ec: Complete Power and USB PD API
>   mfd: cros_ec: Add API for keyboard testing
>   mfd: cros_ec: Add Hibernate API
>   mfd: cros_ec: Add Smart Battery Firmware update API
>   mfd: cros_ec: Add I2C passthru protection API
>   mfd: cros_ec: Add API for EC-EC communication
>   mfd: cros_ec: Add API for Touchpad support
>   mfd: cros_ec: Add API for Fingerprint support
>   mfd: cros_ec: Add API for rwsig
>   mfd: cros_ec: Add SKU ID and Secure storage API
>   mfd: cros_ec: Add Management API entry points
>   mfd: cros_ec: Update I2S API
>
>  include/linux/mfd/cros_ec_commands.h | 3658 ++++++++++++++++++++------
>  sound/soc/codecs/cros_ec_codec.c     |    8 +-
>  2 files changed, 2915 insertions(+), 751 deletions(-)
>
> --
> 2.21.0.1020.gf2820cf01a-goog
>

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v3 00/30] Update cros_ec_commands.h
  2019-05-17 22:48 ` [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
@ 2019-05-18  6:39   ` Lee Jones
  2019-05-21 17:44     ` Benson Leung
  0 siblings, 1 reply; 38+ messages in thread
From: Lee Jones @ 2019-05-18  6:39 UTC (permalink / raw)
  To: Gwendal Grignou
  Cc: Enric Balletbo i Serra, Benson Leung, Guenter Roeck,
	Jonathan Cameron, Mark Brown, Cheng-Yi Chiang, Takashi Iwai,
	linux-iio, alsa-devel, linux-kernel

On Fri, 17 May 2019, Gwendal Grignou wrote:

> Lee,
> 
> I verified and merged the changes on the kernels (3.18, 4.4 and 4.14)
> used on chromebook using a squashed version of these patches.
> (crrev.com/c/1583322, crrev.com/c/1583385, crrev.com/c/1583321
> respectively)
> Please let me know if you have any questions.

Is no one else from Chromium going to review?

These seem like quite important changes.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [alsa-devel] [PATCH v3 00/30] Update cros_ec_commands.h
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (30 preceding siblings ...)
  2019-05-17 22:48 ` [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
@ 2019-05-21 13:45 ` Fabien Lahoudere
  2019-05-22  5:53   ` Lee Jones
  2019-06-03 12:53 ` Lee Jones
  32 siblings, 1 reply; 38+ messages in thread
From: Fabien Lahoudere @ 2019-05-21 13:45 UTC (permalink / raw)
  To: Gwendal Grignou, enric.balletbo, bleung, groeck, lee.jones,
	jic23, broonie, cychiang, tiwai
  Cc: linux-iio, alsa-devel, linux-kernel

Le jeudi 09 mai 2019 à 14:13 -0700, Gwendal Grignou a écrit :
> The interface between CrosEC embedded controller and the host,
> described by cros_ec_commands.h, as diverged from what the embedded
> controller really support.
> 
> The source of thruth is at
> https://chromium.googlesource.com/chromiumos/platform/ec/+/master/include/ec_commands.h
> 
> That include file is converted to remove ACPI and Embedded only code.

Hi, 

I reviewed patches of the series and they looks good to me.

Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>


^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v3 00/30] Update cros_ec_commands.h
  2019-05-18  6:39   ` Lee Jones
@ 2019-05-21 17:44     ` Benson Leung
  2019-05-22  5:53       ` Lee Jones
  0 siblings, 1 reply; 38+ messages in thread
From: Benson Leung @ 2019-05-21 17:44 UTC (permalink / raw)
  To: Lee Jones
  Cc: Gwendal Grignou, Enric Balletbo i Serra, Benson Leung,
	Guenter Roeck, Jonathan Cameron, Mark Brown, Cheng-Yi Chiang,
	Takashi Iwai, linux-iio, alsa-devel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 962 bytes --]

Hi Lee,

On Sat, May 18, 2019 at 07:39:49AM +0100, Lee Jones wrote:
> On Fri, 17 May 2019, Gwendal Grignou wrote:
> 
> > Lee,
> > 
> > I verified and merged the changes on the kernels (3.18, 4.4 and 4.14)
> > used on chromebook using a squashed version of these patches.
> > (crrev.com/c/1583322, crrev.com/c/1583385, crrev.com/c/1583321
> > respectively)
> > Please let me know if you have any questions.
> 
> Is no one else from Chromium going to review?
> 
> These seem like quite important changes.
> 

I've gone ahead and acked the whole series. Enric and I are OK with this going
in for 5.3, and as Gwendal mentioned, he's landed these changes into our
production kernels for Chrome OS as well, so this is what we want to sync on.

Let me know if you have any other concerns.

Thanks,
Benson

-- 
Benson Leung
Staff Software Engineer
Chrome OS Kernel
Google Inc.
bleung@google.com
Chromium OS Project
bleung@chromium.org

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v3 00/30] Update cros_ec_commands.h
  2019-05-21 17:44     ` Benson Leung
@ 2019-05-22  5:53       ` Lee Jones
  0 siblings, 0 replies; 38+ messages in thread
From: Lee Jones @ 2019-05-22  5:53 UTC (permalink / raw)
  To: Benson Leung
  Cc: Gwendal Grignou, Enric Balletbo i Serra, Benson Leung,
	Guenter Roeck, Jonathan Cameron, Mark Brown, Cheng-Yi Chiang,
	Takashi Iwai, linux-iio, alsa-devel, linux-kernel

On Tue, 21 May 2019, Benson Leung wrote:

> Hi Lee,
> 
> On Sat, May 18, 2019 at 07:39:49AM +0100, Lee Jones wrote:
> > On Fri, 17 May 2019, Gwendal Grignou wrote:
> > 
> > > Lee,
> > > 
> > > I verified and merged the changes on the kernels (3.18, 4.4 and 4.14)
> > > used on chromebook using a squashed version of these patches.
> > > (crrev.com/c/1583322, crrev.com/c/1583385, crrev.com/c/1583321
> > > respectively)
> > > Please let me know if you have any questions.
> > 
> > Is no one else from Chromium going to review?
> > 
> > These seem like quite important changes.
> > 
> 
> I've gone ahead and acked the whole series. Enric and I are OK with this going
> in for 5.3, and as Gwendal mentioned, he's landed these changes into our
> production kernels for Chrome OS as well, so this is what we want to sync on.

Wonderful, thank you.

> Let me know if you have any other concerns.
> 
> Thanks,
> Benson
> 



-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [alsa-devel] [PATCH v3 00/30] Update cros_ec_commands.h
  2019-05-21 13:45 ` [alsa-devel] " Fabien Lahoudere
@ 2019-05-22  5:53   ` Lee Jones
  0 siblings, 0 replies; 38+ messages in thread
From: Lee Jones @ 2019-05-22  5:53 UTC (permalink / raw)
  To: Fabien Lahoudere
  Cc: Gwendal Grignou, enric.balletbo, bleung, groeck, jic23, broonie,
	cychiang, tiwai, linux-iio, alsa-devel, linux-kernel

On Tue, 21 May 2019, Fabien Lahoudere wrote:

> Le jeudi 09 mai 2019 à 14:13 -0700, Gwendal Grignou a écrit :
> > The interface between CrosEC embedded controller and the host,
> > described by cros_ec_commands.h, as diverged from what the embedded
> > controller really support.
> > 
> > The source of thruth is at
> > https://chromium.googlesource.com/chromiumos/platform/ec/+/master/include/ec_commands.h
> > 
> > That include file is converted to remove ACPI and Embedded only code.
> 
> Hi, 
> 
> I reviewed patches of the series and they looks good to me.
> 
> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>

Thanks Fabien.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

^ permalink raw reply	[flat|nested] 38+ messages in thread

* Re: [PATCH v3 00/30] Update cros_ec_commands.h
  2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
                   ` (31 preceding siblings ...)
  2019-05-21 13:45 ` [alsa-devel] " Fabien Lahoudere
@ 2019-06-03 12:53 ` Lee Jones
  32 siblings, 0 replies; 38+ messages in thread
From: Lee Jones @ 2019-06-03 12:53 UTC (permalink / raw)
  To: Gwendal Grignou
  Cc: enric.balletbo, bleung, groeck, jic23, broonie, cychiang, tiwai,
	linux-iio, alsa-devel, linux-kernel

On Thu, 09 May 2019, Gwendal Grignou wrote:

> The interface between CrosEC embedded controller and the host,
> described by cros_ec_commands.h, as diverged from what the embedded
> controller really support.
> 
> The source of thruth is at
> https://chromium.googlesource.com/chromiumos/platform/ec/+/master/include/ec_commands.h
> 
> That include file is converted to remove ACPI and Embedded only code.
> 
> From now on, cros_ec_commands.h will be automatically generated from
> the file above, do not modify directly.
> 
> Fell free to squash the commits below.
> 
> Changes in v3:
> - Rebase after commit 81888d8ab1532 ("mfd: cros_ec: Update the EC feature codes")
> - Add Acked-by: Benson Leung <bleung@chromium.org>
> 
> Changes in v2:
> - Move I2S changes at the end of the patchset, squashed with change in
>   sound/soc/codecs/cros_ec_codec.c to match new interface.
> - Add Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> 
> Gwendal Grignou (30):
>   mfd: cros_ec: Update license term
>   mfd: cros_ec: Zero BUILD_ macro
>   mfd: cros_ec: set comments properly
>   mfd: cros_ec: add ec_align macros
>   mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values
>   mfd: cros_ec: use BIT macro
>   mfd: cros_ec: Update ACPI interface definition
>   mfd: cros_ec: move HDMI CEC API definition
>   mfd: cros_ec: Remove zero-size structs
>   mfd: cros_ec: Add Flash V2 commands API
>   mfd: cros_ec: Add PWM_SET_DUTY API
>   mfd: cros_ec: Add lightbar v2 API
>   mfd: cros_ec: Expand hash API
>   mfd: cros_ec: Add EC transport protocol v4
>   mfd: cros_ec: Complete MEMS sensor API
>   mfd: cros_ec: Fix event processing API
>   mfd: cros_ec: Add fingerprint API
>   mfd: cros_ec: Fix temperature API
>   mfd: cros_ec: Complete Power and USB PD API
>   mfd: cros_ec: Add API for keyboard testing
>   mfd: cros_ec: Add Hibernate API
>   mfd: cros_ec: Add Smart Battery Firmware update API
>   mfd: cros_ec: Add I2C passthru protection API
>   mfd: cros_ec: Add API for EC-EC communication
>   mfd: cros_ec: Add API for Touchpad support
>   mfd: cros_ec: Add API for Fingerprint support
>   mfd: cros_ec: Add API for rwsig
>   mfd: cros_ec: Add SKU ID and Secure storage API
>   mfd: cros_ec: Add Management API entry points
>   mfd: cros_ec: Update I2S API
> 
>  include/linux/mfd/cros_ec_commands.h | 3658 ++++++++++++++++++++------
>  sound/soc/codecs/cros_ec_codec.c     |    8 +-
>  2 files changed, 2915 insertions(+), 751 deletions(-)

Okay, I'm ready to apply this now.  Could you collect all of the Acks
you received and submit a RESEND please?

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

^ permalink raw reply	[flat|nested] 38+ messages in thread

end of thread, other threads:[~2019-06-03 12:53 UTC | newest]

Thread overview: 38+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-09 21:13 [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 01/30] mfd: cros_ec: Update license term Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 02/30] mfd: cros_ec: Zero BUILD_ macro Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 03/30] mfd: cros_ec: set comments properly Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 04/30] mfd: cros_ec: add ec_align macros Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 05/30] mfd: cros_ec: Define commands as 4-digit UPPER CASE hex values Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 06/30] mfd: cros_ec: use BIT macro Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 07/30] mfd: cros_ec: Update ACPI interface definition Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 08/30] mfd: cros_ec: move HDMI CEC API definition Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 09/30] mfd: cros_ec: Remove zero-size structs Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 10/30] mfd: cros_ec: Add Flash V2 commands API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 11/30] mfd: cros_ec: Add PWM_SET_DUTY API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 12/30] mfd: cros_ec: Add lightbar v2 API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 13/30] mfd: cros_ec: Expand hash API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 14/30] mfd: cros_ec: Add EC transport protocol v4 Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 15/30] mfd: cros_ec: Complete MEMS sensor API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 16/30] mfd: cros_ec: Fix event processing API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 17/30] mfd: cros_ec: Add fingerprint API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 18/30] mfd: cros_ec: Fix temperature API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 19/30] mfd: cros_ec: Complete Power and USB PD API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 20/30] mfd: cros_ec: Add API for keyboard testing Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 21/30] mfd: cros_ec: Add Hibernate API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 22/30] mfd: cros_ec: Add Smart Battery Firmware update API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 23/30] mfd: cros_ec: Add I2C passthru protection API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 24/30] mfd: cros_ec: Add API for EC-EC communication Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 25/30] mfd: cros_ec: Add API for Touchpad support Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 26/30] mfd: cros_ec: Add API for Fingerprint support Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 27/30] mfd: cros_ec: Add API for rwsig Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 28/30] mfd: cros_ec: Add SKU ID and Secure storage API Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 29/30] mfd: cros_ec: Add Management API entry points Gwendal Grignou
2019-05-09 21:13 ` [PATCH v3 30/30] mfd: cros_ec: Update I2S API Gwendal Grignou
2019-05-17 22:48 ` [PATCH v3 00/30] Update cros_ec_commands.h Gwendal Grignou
2019-05-18  6:39   ` Lee Jones
2019-05-21 17:44     ` Benson Leung
2019-05-22  5:53       ` Lee Jones
2019-05-21 13:45 ` [alsa-devel] " Fabien Lahoudere
2019-05-22  5:53   ` Lee Jones
2019-06-03 12:53 ` Lee Jones

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).