From: Thierry Reding <thierry.reding@gmail.com>
To: Sowjanya Komatineni <skomatineni@nvidia.com>
Cc: jonathanh@nvidia.com, jckuo@nvidia.com, talho@nvidia.com,
josephl@nvidia.com, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH V1 08/12] soc/tegra: pmc: allow support for more tegra wake models
Date: Wed, 22 May 2019 14:49:44 +0200 [thread overview]
Message-ID: <20190522124944.GI30938@ulmo> (raw)
In-Reply-To: <1558481483-22254-9-git-send-email-skomatineni@nvidia.com>
[-- Attachment #1: Type: text/plain, Size: 4149 bytes --]
On Tue, May 21, 2019 at 04:31:19PM -0700, Sowjanya Komatineni wrote:
> This patch allows to create separate irq_set_wake and irq_set_type
> implementations for different tegra designs PMC that has different
> wake models which require difference wake registers and different
> programming sequence.
>
> AOWAKE model support is available for Tegra186 and Tegra194 only
> and it resides within PMC and supports tiered wake architecture.
>
> Tegra210 and prior tegra designs uses PMC directly to receive wake
> events and coordinate the wake sequence.
>
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
> drivers/soc/tegra/pmc.c | 21 ++++++++++++++++-----
> 1 file changed, 16 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
> index 5648e5c09ef5..f77ce4b827e3 100644
> --- a/drivers/soc/tegra/pmc.c
> +++ b/drivers/soc/tegra/pmc.c
> @@ -235,6 +235,8 @@ struct tegra_pmc_soc {
> void (*setup_irq_polarity)(struct tegra_pmc *pmc,
> struct device_node *np,
> bool invert);
> + int (*pmc_irq_set_wake)(struct irq_data *data, unsigned int on);
> + int (*pmc_irq_set_type)(struct irq_data *data, unsigned int type);
>
> const char * const *reset_sources;
> unsigned int num_reset_sources;
> @@ -1915,12 +1917,15 @@ static const struct irq_domain_ops tegra_pmc_irq_domain_ops = {
> .alloc = tegra_pmc_irq_alloc,
> };
>
> -static int tegra_pmc_irq_set_wake(struct irq_data *data, unsigned int on)
> +static int tegra186_pmc_irq_set_wake(struct irq_data *data, unsigned int on)
> {
> struct tegra_pmc *pmc = irq_data_get_irq_chip_data(data);
> unsigned int offset, bit;
> u32 value;
>
> + if (data->hwirq < 0)
> + return 0;
> +
This isn't going to work: data->hwirq is unsigned long so it will never
be < 0. Also, why is this necessary? I see that it's there in
tegra_pmc_irq_set_wake(), but I fail to remember why that's there. When
is this ever invalid?
Thierry
> offset = data->hwirq / 32;
> bit = data->hwirq % 32;
>
> @@ -1943,12 +1948,12 @@ static int tegra_pmc_irq_set_wake(struct irq_data *data, unsigned int on)
> return 0;
> }
>
> -static int tegra_pmc_irq_set_type(struct irq_data *data, unsigned int type)
> +static int tegra186_pmc_irq_set_type(struct irq_data *data, unsigned int type)
> {
> struct tegra_pmc *pmc = irq_data_get_irq_chip_data(data);
> u32 value;
>
> - if (data->hwirq == ULONG_MAX)
> + if (data->hwirq < 0)
> return 0;
>
> value = readl(pmc->wake + WAKE_AOWAKE_CNTRL(data->hwirq));
> @@ -1996,8 +2001,10 @@ static int tegra_pmc_irq_init(struct tegra_pmc *pmc)
> pmc->irq.irq_unmask = irq_chip_unmask_parent;
> pmc->irq.irq_eoi = irq_chip_eoi_parent;
> pmc->irq.irq_set_affinity = irq_chip_set_affinity_parent;
> - pmc->irq.irq_set_type = tegra_pmc_irq_set_type;
> - pmc->irq.irq_set_wake = tegra_pmc_irq_set_wake;
> + if (pmc->soc->pmc_irq_set_type)
> + pmc->irq.irq_set_type = pmc->soc->pmc_irq_set_type;
> + if (pmc->soc->pmc_irq_set_wake)
> + pmc->irq.irq_set_wake = pmc->soc->pmc_irq_set_wake;
>
> pmc->domain = irq_domain_add_hierarchy(parent, 0, 96, pmc->dev->of_node,
> &tegra_pmc_irq_domain_ops, pmc);
> @@ -2670,6 +2677,8 @@ static const struct tegra_pmc_soc tegra186_pmc_soc = {
> .regs = &tegra186_pmc_regs,
> .init = NULL,
> .setup_irq_polarity = tegra186_pmc_setup_irq_polarity,
> + .pmc_irq_set_wake = tegra186_pmc_irq_set_wake,
> + .pmc_irq_set_type = tegra186_pmc_irq_set_type,
> .reset_sources = tegra186_reset_sources,
> .num_reset_sources = ARRAY_SIZE(tegra186_reset_sources),
> .reset_levels = tegra186_reset_levels,
> @@ -2748,6 +2757,8 @@ static const struct tegra_pmc_soc tegra194_pmc_soc = {
> .regs = &tegra186_pmc_regs,
> .init = NULL,
> .setup_irq_polarity = tegra186_pmc_setup_irq_polarity,
> + .pmc_irq_set_wake = tegra186_pmc_irq_set_wake,
> + .pmc_irq_set_type = tegra186_pmc_irq_set_type,
> .num_wake_events = ARRAY_SIZE(tegra194_wake_events),
> .wake_events = tegra194_wake_events,
> };
> --
> 2.7.4
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2019-05-22 12:49 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-21 23:31 [PATCH V1 00/12] LP0 entry and exit support for Tegra210 Sowjanya Komatineni
2019-05-21 23:31 ` [PATCH V1 01/12] irqchip: tegra: do not disable COP IRQ during suspend Sowjanya Komatineni
2019-05-22 12:12 ` Thierry Reding
2019-05-21 23:31 ` [PATCH V1 02/12] pinctrl: tegra: add suspend and resume support Sowjanya Komatineni
2019-05-22 12:37 ` Thierry Reding
2019-05-21 23:31 ` [PATCH V1 03/12] clk: tegra: save and restore PLLs state for system Sowjanya Komatineni
2019-05-22 13:31 ` Thierry Reding
2019-05-21 23:31 ` [PATCH V1 04/12] clk: tegra: add support for peripheral clock suspend and resume Sowjanya Komatineni
2019-05-21 23:31 ` [PATCH V1 05/12] clk: tegra: add support for OSC clock resume Sowjanya Komatineni
2019-05-21 23:31 ` [PATCH V1 06/12] clk: tegra: add suspend resume support for DFLL clock Sowjanya Komatineni
2019-05-21 23:31 ` [PATCH V1 07/12] clk: tegra: support for Tegra210 clocks suspend-resume Sowjanya Komatineni
2019-05-21 23:31 ` [PATCH V1 08/12] soc/tegra: pmc: allow support for more tegra wake models Sowjanya Komatineni
2019-05-22 12:49 ` Thierry Reding [this message]
2019-05-22 13:02 ` Thierry Reding
2019-05-21 23:31 ` [PATCH V1 09/12] soc/tegra: pmc: add pmc wake support for tegra210 Sowjanya Komatineni
2019-05-22 13:01 ` Thierry Reding
2019-05-21 23:31 ` [PATCH V1 10/12] gpio: tegra: implement wake event support for Tegra210 and prior GPIO Sowjanya Komatineni
2019-05-22 13:24 ` Thierry Reding
2019-05-25 20:39 ` Sowjanya Komatineni
2019-05-21 23:31 ` [PATCH V1 11/12] soc/tegra: pmc: configure tegra deep sleep control settings Sowjanya Komatineni
2019-05-22 13:28 ` Thierry Reding
2019-05-21 23:31 ` [PATCH V1 12/12] arm64: tegra: enable wake from deep sleep on RTC alarm Sowjanya Komatineni
2019-05-22 13:33 ` [PATCH V1 00/12] LP0 entry and exit support for Tegra210 Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190522124944.GI30938@ulmo \
--to=thierry.reding@gmail.com \
--cc=jckuo@nvidia.com \
--cc=jonathanh@nvidia.com \
--cc=josephl@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=skomatineni@nvidia.com \
--cc=talho@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).