linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeff Kletsky <lede@allycomm.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Vignesh Raghavendra <vigneshr@ti.com>
Cc: Jeff Kletsky <git-commits@allycomm.com>,
	kbuild test robot <lkp@intel.com>,
	linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 3/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG
Date: Wed, 22 May 2019 15:05:55 -0700	[thread overview]
Message-ID: <20190522220555.11626-4-lede@allycomm.com> (raw)
In-Reply-To: <20190522220555.11626-1-lede@allycomm.com>

From: Jeff Kletsky <git-commits@allycomm.com>

The GigaDevice GD5F1GQ4UFxxG SPI NAND is in current production devices
and, while it has the same logical layout as the E-series devices,
it differs in the SPI interfacing in significant ways.

This support is contingent on previous commits to:

  * Add support for two-byte device IDs
  * Define macros for page-read ops with three-byte addresses

http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/

Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>

Reported-by: kbuild test robot <lkp@intel.com>
---
 drivers/mtd/nand/spi/gigadevice.c | 79 +++++++++++++++++++++++++------
 1 file changed, 64 insertions(+), 15 deletions(-)

diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c
index e5586390026a..b0c26eb5e8b6 100644
--- a/drivers/mtd/nand/spi/gigadevice.c
+++ b/drivers/mtd/nand/spi/gigadevice.c
@@ -9,11 +9,17 @@
 #include <linux/mtd/spinand.h>
 
 #define SPINAND_MFR_GIGADEVICE			0xC8
+
 #define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS	(1 << 4)
 #define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS	(3 << 4)
 
 #define GD5FXGQ4UEXXG_REG_STATUS2		0xf0
 
+#define GD5FXGQ4UXFXXG_STATUS_ECC_MASK		(7 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS	(0 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS	(1 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR	(7 << 4)
+
 static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -22,6 +28,14 @@ static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
 
+static SPINAND_OP_VARIANTS(read_cache_variants_f,
+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP_3A(true, 0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP_3A(false, 0, 0, NULL, 0));
+
 static SPINAND_OP_VARIANTS(write_cache_variants,
 		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
 		SPINAND_PROG_LOAD(true, 0, NULL, 0));
@@ -59,6 +73,11 @@ static int gd5fxgq4xa_ooblayout_free(struct mtd_info *mtd, int section,
 	return 0;
 }
 
+static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
+	.ecc = gd5fxgq4xa_ooblayout_ecc,
+	.free = gd5fxgq4xa_ooblayout_free,
+};
+
 static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
 					 u8 status)
 {
@@ -83,7 +102,7 @@ static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
 	return -EINVAL;
 }
 
-static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
+static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
 				       struct mtd_oob_region *region)
 {
 	if (section)
@@ -95,7 +114,7 @@ static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
 	return 0;
 }
 
-static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
+static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section,
 					struct mtd_oob_region *region)
 {
 	if (section)
@@ -108,6 +127,11 @@ static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
 	return 0;
 }
 
+static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = {
+	.ecc = gd5fxgq4_variant2_ooblayout_ecc,
+	.free = gd5fxgq4_variant2_ooblayout_free,
+};
+
 static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
 					u8 status)
 {
@@ -150,15 +174,25 @@ static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
 	return -EINVAL;
 }
 
-static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
-	.ecc = gd5fxgq4xa_ooblayout_ecc,
-	.free = gd5fxgq4xa_ooblayout_free,
-};
+static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand,
+					u8 status)
+{
+	switch (status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) {
+	case GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS:
+		return 0;
 
-static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = {
-	.ecc = gd5fxgq4uexxg_ooblayout_ecc,
-	.free = gd5fxgq4uexxg_ooblayout_free,
-};
+	case GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS:
+		return 3;
+
+	case GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR:
+		return -EBADMSG;
+
+	default: /* (2 << 4) through (6 << 4) are 4-8 corrected errors */
+		return ((status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) >> 4) + 2;
+	}
+
+	return -EINVAL;
+}
 
 static const struct spinand_info gigadevice_spinand_table[] = {
 	SPINAND_INFO("GD5F1GQ4xA", 0xF1,
@@ -195,25 +229,40 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 					      &write_cache_variants,
 					      &update_cache_variants),
 		     0,
-		     SPINAND_ECCINFO(&gd5fxgq4uexxg_ooblayout,
+		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
 				     gd5fxgq4uexxg_ecc_get_status)),
+	SPINAND_INFO("GD5F1GQ4UFxxG", 0xb148,
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
+				     gd5fxgq4ufxxg_ecc_get_status)),
 };
 
 static int gigadevice_spinand_detect(struct spinand_device *spinand)
 {
 	u8 *id = spinand->id.data;
+	u16 did;
 	int ret;
 
 	/*
-	 * For GD NANDs, There is an address byte needed to shift in before IDs
-	 * are read out, so the first byte in raw_id is dummy.
+	 * Earlier GDF5-series devices (A,E) return [0][MID][DID]
+	 * Later (F) devices return [MID][DID1][DID2]
 	 */
-	if (id[1] != SPINAND_MFR_GIGADEVICE)
+
+	if (id[0] == SPINAND_MFR_GIGADEVICE)
+		did = (id[1] << 8) + id[2];
+	else if (id[0] == 0 && id[1] == SPINAND_MFR_GIGADEVICE)
+		did = id[2];
+	else
 		return 0;
 
 	ret = spinand_match_and_init(spinand, gigadevice_spinand_table,
 				     ARRAY_SIZE(gigadevice_spinand_table),
-				     id[2]);
+				     did);
 	if (ret)
 		return ret;
 
-- 
2.20.1


  parent reply	other threads:[~2019-05-22 22:06 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-22 22:05 [PATCH v4 0/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG Jeff Kletsky
2019-05-22 22:05 ` [PATCH v4 1/3] mtd: spinand: Define macros for page-read ops with three-byte addresses Jeff Kletsky
2019-06-03  8:02   ` Miquel Raynal
2019-05-22 22:05 ` [PATCH v4 2/3] mtd: spinand: Add support for two-byte device IDs Jeff Kletsky
2019-06-03  8:02   ` Miquel Raynal
2019-05-22 22:05 ` Jeff Kletsky [this message]
2019-05-23  6:42   ` [PATCH v4 3/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG Schrempf Frieder
2019-05-24  0:12     ` Jeff Kletsky
2019-05-27  6:35       ` Schrempf Frieder
2019-05-27  9:28         ` Miquel Raynal
2019-06-03  8:02   ` Miquel Raynal
2019-05-23  6:56 ` [PATCH v4 0/3] " Schrempf Frieder

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190522220555.11626-4-lede@allycomm.com \
    --to=lede@allycomm.com \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=git-commits@allycomm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=lkp@intel.com \
    --cc=marek.vasut@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).