[PATCH] scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask in pqi_pci_init()

[Lianbo Jiang <lijiang@redhat.com>]

When SME is enabled, the smartpqi driver won't work on the HP DL385
G10 machine, which causes the failure of kernel boot because it fails
to allocate pqi error buffer. Please refer to the kernel log:
....
[    9.431749] usbcore: registered new interface driver uas
[    9.441524] Microsemi PQI Driver (v1.1.4-130)
[    9.442956] i40e 0000:04:00.0: fw 6.70.48768 api 1.7 nvm 10.2.5
[    9.447237] smartpqi 0000:23:00.0: Microsemi Smart Family Controller found
         Starting dracut initqueue hook...
[  OK  ] Started Show Plymouth Boot Scre[    9.471654] Broadcom NetXtreme-C/E driver bnxt_en v1.9.1
en.
[  OK  ] Started Forward Password Requests to Plymouth Directory Watch.
[[0;[    9.487108] smartpqi 0000:23:00.0: failed to allocate PQI error buffer
....
[  139.050544] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts
[  139.589779] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts

For correct operation, lets call the dma_set_mask_and_coherent() to
properly set the mask for both streaming and coherent, in order to
inform the kernel about the devices DMA addressing capabilities.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
---
 drivers/scsi/smartpqi/smartpqi_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index c26cac819f9e..8b1fde6c7dab 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -7282,7 +7282,7 @@ static int pqi_pci_init(struct pqi_ctrl_info *ctrl_info)
 	else
 		mask = DMA_BIT_MASK(32);
 
-	rc = dma_set_mask(&ctrl_info->pci_dev->dev, mask);
+	rc = dma_set_mask_and_coherent(&ctrl_info->pci_dev->dev, mask);
 	if (rc) {
 		dev_err(&ctrl_info->pci_dev->dev, "failed to set DMA mask\n");
 		goto disable_device;
-- 
2.17.1