From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Sekhar Nori <nsekhar@ti.com>, Kevin Hilman <khilman@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
David Lechner <david@lechnology.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [RFC v2 1/2] clocksource: davinci-timer: add support for clockevents
Date: Thu, 23 May 2019 14:58:12 +0200 [thread overview]
Message-ID: <20190523125813.29506-2-brgl@bgdev.pl> (raw)
In-Reply-To: <20190523125813.29506-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Currently the clocksource and clockevent support for davinci platforms
lives in mach-davinci. It hard-codes many things, uses global variables,
implements functionalities unused by any platform and has code fragments
scattered across many (often unrelated) files.
Implement a new, modern and simplified timer driver and put it into
drivers/clocksource. We still need to support legacy board files so
export a config structure and a function that allows machine code to
register the timer.
The timer we're using is 64-bit but can be programmed in dual 32-bit
mode (both chained and unchained). We're using dual 32-bit mode to
have separate counters for clockevents and clocksource.
This patch contains the core code and support for clockevent. The
clocksource code will be included in a subsequent patch.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
drivers/clocksource/Kconfig | 5 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-davinci.c | 285 ++++++++++++++++++++++++++++
include/clocksource/timer-davinci.h | 44 +++++
4 files changed, 335 insertions(+)
create mode 100644 drivers/clocksource/timer-davinci.c
create mode 100644 include/clocksource/timer-davinci.h
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 6bcaa4e2e72c..32dee6abd54a 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -42,6 +42,11 @@ config BCM_KONA_TIMER
help
Enables the support for the BCM Kona mobile timer driver.
+config DAVINCI_TIMER
+ bool "Texas Instruments DaVinci timer driver" if COMPILE_TEST
+ help
+ Enables the support for the TI DaVinci timer driver.
+
config DIGICOLOR_TIMER
bool "Digicolor timer driver" if COMPILE_TEST
select CLKSRC_MMIO
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 236858fa7fbf..021831bcc567 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_SH_TIMER_TMU) += sh_tmu.o
obj-$(CONFIG_EM_TIMER_STI) += em_sti.o
obj-$(CONFIG_CLKBLD_I8253) += i8253.o
obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
+obj-$(CONFIG_DAVINCI_TIMER) += timer-davinci.o
obj-$(CONFIG_DIGICOLOR_TIMER) += timer-digicolor.o
obj-$(CONFIG_OMAP_DM_TIMER) += timer-ti-dm.o
obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
diff --git a/drivers/clocksource/timer-davinci.c b/drivers/clocksource/timer-davinci.c
new file mode 100644
index 000000000000..a8fc7b3805c9
--- /dev/null
+++ b/drivers/clocksource/timer-davinci.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI DaVinci clocksource driver
+ *
+ * Copyright (C) 2019 Texas Instruments
+ * Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+ * (with tiny parts adopted from code by Kevin Hilman <khilman@baylibre.com>)
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+#include <clocksource/timer-davinci.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt "\n", __func__
+
+#define DAVINCI_TIMER_REG_TIM12 0x10
+#define DAVINCI_TIMER_REG_TIM34 0x14
+#define DAVINCI_TIMER_REG_PRD12 0x18
+#define DAVINCI_TIMER_REG_PRD34 0x1c
+#define DAVINCI_TIMER_REG_TCR 0x20
+#define DAVINCI_TIMER_REG_TGCR 0x24
+
+#define DAVINCI_TIMER_TIMMODE_MASK GENMASK(3, 2)
+#define DAVINCI_TIMER_RESET_MASK GENMASK(1, 0)
+#define DAVINCI_TIMER_TIMMODE_32BIT_UNCHAINED BIT(2)
+#define DAVINCI_TIMER_UNRESET GENMASK(1, 0)
+
+#define DAVINCI_TIMER_ENAMODE_MASK GENMASK(1, 0)
+#define DAVINCI_TIMER_ENAMODE_DISABLED 0x00
+#define DAVINCI_TIMER_ENAMODE_ONESHOT BIT(0)
+
+#define DAVINCI_TIMER_ENAMODE_SHIFT_TIM12 6
+#define DAVINCI_TIMER_ENAMODE_SHIFT_TIM34 22
+
+#define DAVINCI_TIMER_MIN_DELTA 0x01
+#define DAVINCI_TIMER_MAX_DELTA 0xfffffffe
+
+#define DAVINCI_TIMER_TGCR_DEFAULT \
+ (DAVINCI_TIMER_TIMMODE_32BIT_UNCHAINED | DAVINCI_TIMER_UNRESET)
+
+/* Cache the TCR register value. */
+static unsigned int davinci_tcr;
+
+struct davinci_clockevent {
+ struct clock_event_device dev;
+ void __iomem *base;
+
+ unsigned int tim_off;
+ unsigned int prd_off;
+ unsigned int cmp_off;
+
+ unsigned int enamode_disabled;
+ unsigned int enamode_oneshot;
+ unsigned int enamode_mask;
+};
+
+static struct davinci_clockevent *
+to_davinci_clockevent(struct clock_event_device *clockevent)
+{
+ return container_of(clockevent, struct davinci_clockevent, dev);
+}
+
+static unsigned int
+davinci_clockevent_read(struct davinci_clockevent *clockevent,
+ unsigned int reg)
+{
+ return readl_relaxed(clockevent->base + reg);
+}
+
+static void davinci_clockevent_write(struct davinci_clockevent *clockevent,
+ unsigned int reg, unsigned int val)
+{
+ writel_relaxed(val, clockevent->base + reg);
+}
+
+static void davinci_tcr_update(void __iomem *base,
+ unsigned int mask, unsigned int val)
+{
+ davinci_tcr &= ~mask;
+ davinci_tcr |= val & mask;
+
+ writel_relaxed(davinci_tcr, base + DAVINCI_TIMER_REG_TCR);
+}
+
+static int davinci_clockevent_shutdown(struct clock_event_device *dev)
+{
+ struct davinci_clockevent *clockevent;
+
+ clockevent = to_davinci_clockevent(dev);
+
+ davinci_tcr_update(clockevent->base,
+ clockevent->enamode_mask,
+ clockevent->enamode_disabled);
+
+ return 0;
+}
+
+static int davinci_clockevent_set_oneshot(struct clock_event_device *dev)
+{
+ struct davinci_clockevent *clockevent = to_davinci_clockevent(dev);
+
+ davinci_clockevent_write(clockevent, clockevent->tim_off, 0x0);
+
+ davinci_tcr_update(clockevent->base,
+ clockevent->enamode_mask,
+ clockevent->enamode_oneshot);
+
+ return 0;
+}
+
+static int
+davinci_clockevent_set_next_event_std(unsigned long cycles,
+ struct clock_event_device *dev)
+{
+ struct davinci_clockevent *clockevent = to_davinci_clockevent(dev);
+
+ davinci_clockevent_shutdown(dev);
+
+ davinci_clockevent_write(clockevent, clockevent->tim_off, 0x0);
+ davinci_clockevent_write(clockevent, clockevent->prd_off, cycles);
+
+ davinci_clockevent_set_oneshot(dev);
+
+ return 0;
+}
+
+static int
+davinci_clockevent_set_next_event_cmp(unsigned long cycles,
+ struct clock_event_device *dev)
+{
+ struct davinci_clockevent *clockevent = to_davinci_clockevent(dev);
+ unsigned int curr_time;
+
+ curr_time = davinci_clockevent_read(clockevent, clockevent->tim_off);
+ davinci_clockevent_write(clockevent,
+ clockevent->cmp_off, curr_time + cycles);
+
+ return 0;
+}
+
+static irqreturn_t davinci_timer_irq_timer(int irq, void *data)
+{
+ struct davinci_clockevent *clockevent = data;
+
+ if (!clockevent_state_oneshot(&clockevent->dev))
+ davinci_tcr_update(clockevent,
+ clockevent->enamode_mask,
+ clockevent->enamode_disabled);
+
+ clockevent->dev.event_handler(&clockevent->dev);
+
+ return IRQ_HANDLED;
+}
+
+static void davinci_timer_init(void __iomem *base)
+{
+ /* Set clock to internal mode and disable it. */
+ writel_relaxed(0x0, base + DAVINCI_TIMER_REG_TCR);
+ /*
+ * Reset both 32-bit timers, set no prescaler for timer 34, set the
+ * timer to dual 32-bit unchained mode, unreset both 32-bit timers.
+ */
+ writel_relaxed(DAVINCI_TIMER_TGCR_DEFAULT,
+ base + DAVINCI_TIMER_REG_TGCR);
+ /* Init both counters to zero. */
+ writel_relaxed(0x0, base + DAVINCI_TIMER_REG_TIM12);
+ writel_relaxed(0x0, base + DAVINCI_TIMER_REG_TIM34);
+}
+
+int __init davinci_timer_register(struct clk *clk,
+ const struct davinci_timer_cfg *timer_cfg)
+{
+ struct davinci_clockevent *clockevent;
+ unsigned int tick_rate, shift;
+ void __iomem *base;
+ int rv;
+
+ rv = clk_prepare_enable(clk);
+ if (rv) {
+ pr_err("Unable to prepare and enable the timer clock");
+ return rv;
+ }
+
+ base = request_mem_region(timer_cfg->reg.start,
+ resource_size(&timer_cfg->reg),
+ "davinci-timer");
+ if (!base) {
+ pr_err("Unable to request memory region");
+ return -EBUSY;
+ }
+
+ base = ioremap(timer_cfg->reg.start, resource_size(&timer_cfg->reg));
+ if (!base) {
+ pr_err("Unable to map the register range");
+ return -ENOMEM;
+ }
+
+ davinci_timer_init(base);
+ tick_rate = clk_get_rate(clk);
+
+ clockevent = kzalloc(sizeof(*clockevent), GFP_KERNEL);
+ if (!clockevent) {
+ pr_err("Error allocating memory for clockevent data");
+ return -ENOMEM;
+ }
+
+ clockevent->dev.name = "tim12";
+ clockevent->dev.features = CLOCK_EVT_FEAT_ONESHOT;
+ clockevent->dev.cpumask = cpumask_of(0);
+
+ clockevent->base = base;
+ clockevent->tim_off = DAVINCI_TIMER_REG_TIM12;
+ clockevent->prd_off = DAVINCI_TIMER_REG_PRD12;
+
+ shift = DAVINCI_TIMER_ENAMODE_SHIFT_TIM12;
+ clockevent->enamode_disabled = DAVINCI_TIMER_ENAMODE_DISABLED << shift;
+ clockevent->enamode_oneshot = DAVINCI_TIMER_ENAMODE_ONESHOT << shift;
+ clockevent->enamode_mask = DAVINCI_TIMER_ENAMODE_MASK << shift;
+
+ clockevent->dev.set_state_shutdown = davinci_clockevent_shutdown;
+ clockevent->dev.set_state_oneshot = davinci_clockevent_set_oneshot;
+
+ if (timer_cfg->cmp_off) {
+ clockevent->cmp_off = timer_cfg->cmp_off;
+ clockevent->dev.set_next_event =
+ davinci_clockevent_set_next_event_cmp;
+ } else {
+ clockevent->dev.set_next_event =
+ davinci_clockevent_set_next_event_std;
+ }
+
+ rv = request_irq(timer_cfg->irq[DAVINCI_TIMER_CLOCKEVENT_IRQ].start,
+ davinci_timer_irq_timer, IRQF_TIMER,
+ "clockevent", clockevent);
+ if (rv) {
+ pr_err("Unable to request the clockevent interrupt");
+ return rv;
+ }
+
+ clockevents_config_and_register(&clockevent->dev, tick_rate,
+ DAVINCI_TIMER_MIN_DELTA,
+ DAVINCI_TIMER_MAX_DELTA);
+
+ return 0;
+}
+
+static int __init of_davinci_timer_register(struct device_node *np)
+{
+ struct davinci_timer_cfg timer_cfg = { };
+ struct clk *clk;
+ int rv;
+
+ rv = of_address_to_resource(np, 0, &timer_cfg.reg);
+ if (rv) {
+ pr_err("Unable to get the register range for timer");
+ return rv;
+ }
+
+ rv = of_irq_to_resource_table(np, timer_cfg.irq,
+ DAVINCI_TIMER_NUM_IRQS);
+ if (rv != DAVINCI_TIMER_NUM_IRQS) {
+ pr_err("Unable to get the interrupts for timer");
+ return rv;
+ }
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_err("Unable to get the timer clock");
+ return PTR_ERR(clk);
+ }
+
+ rv = davinci_timer_register(clk, &timer_cfg);
+ if (rv)
+ clk_put(clk);
+
+ return rv;
+}
+TIMER_OF_DECLARE(davinci_timer, "ti,da830-timer", of_davinci_timer_register);
diff --git a/include/clocksource/timer-davinci.h b/include/clocksource/timer-davinci.h
new file mode 100644
index 000000000000..1dcc1333fbc8
--- /dev/null
+++ b/include/clocksource/timer-davinci.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * TI DaVinci clocksource driver
+ *
+ * Copyright (C) 2019 Texas Instruments
+ * Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+ */
+
+#ifndef __TIMER_DAVINCI_H__
+#define __TIMER_DAVINCI_H__
+
+#include <linux/clk.h>
+#include <linux/ioport.h>
+
+enum {
+ DAVINCI_TIMER_CLOCKEVENT_IRQ,
+ DAVINCI_TIMER_CLOCKSOURCE_IRQ,
+ DAVINCI_TIMER_NUM_IRQS,
+};
+
+/**
+ * struct davinci_timer_cfg - davinci clocksource driver configuration struct
+ * @reg: register range resource
+ * @irq: clockevent and clocksource interrupt resources
+ * @cmp_off: if set - it specifies the compare register used for clockevent
+ *
+ * Note: if the compare register is specified, the driver will use the bottom
+ * clock half for both clocksource and clockevent and the compare register
+ * to generate event irqs. The user must supply the correct compare register
+ * interrupt number.
+ *
+ * This is only used by da830 the DSP of which uses the top half. The timer
+ * driver still configures the top half to run in free-run mode.
+ */
+struct davinci_timer_cfg {
+ struct resource reg;
+ struct resource irq[DAVINCI_TIMER_NUM_IRQS];
+ unsigned int cmp_off;
+};
+
+int __init davinci_timer_register(struct clk *clk,
+ const struct davinci_timer_cfg *data);
+
+#endif /* __TIMER_DAVINCI_H__ */
--
2.21.0
next prev parent reply other threads:[~2019-05-23 12:58 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-23 12:58 [RFC v2 0/2] clocksource: davinci-timer: new driver Bartosz Golaszewski
2019-05-23 12:58 ` Bartosz Golaszewski [this message]
2019-05-23 16:38 ` [RFC v2 1/2] clocksource: davinci-timer: add support for clockevents Daniel Lezcano
2019-05-24 7:28 ` Bartosz Golaszewski
2019-05-24 8:59 ` Daniel Lezcano
2019-05-24 11:53 ` Bartosz Golaszewski
2019-05-25 14:16 ` Daniel Lezcano
2019-05-26 8:16 ` Bartosz Golaszewski
2019-05-31 12:21 ` Bartosz Golaszewski
2019-05-23 12:58 ` [RFC v2 2/2] clocksource: timer-davinci: add support for clocksource Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190523125813.29506-2-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=bgolaszewski@baylibre.com \
--cc=daniel.lezcano@linaro.org \
--cc=david@lechnology.com \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).