Hi,

Thanks for working on this!

On Sat, May 25, 2019 at 02:13:28PM -0400, Yangtao Li wrote:
> This patch adds binding document for allwinner h6 thermal controller.
>
> Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
> ---
>  .../bindings/thermal/sun8i-thermal.yaml       | 71 +++++++++++++++++++
>
>  1 file changed, 71 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
>
> diff --git a/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
> new file mode 100644
> index 000000000000..54cf1277870e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
> @@ -0,0 +1,71 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/sun8i-thermal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Allwinner SUN8I Thermal Controller Device Tree Bindings
> +
> +maintainers:
> +  - Yangtao Li <tiny.windzz@gmail.com>
> +
> +description: |-
> +  This describes the device tree binding for the Allwinner thermal
> +  controller which measures the on-SoC temperatures.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - allwinner,sun50i-h6-ths
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: ths bus clock
> +
> +  clock-names:
> +    items:
> +      - const: bus

You don't need the items here, you can just do:

clocks:
  maxItems: 1
  description:
    Bus clock

clock-names:
  const: bus

> +  "#thermal-sensor-cells":
> +    enum: [ 0, 1 ]

You should document when you would need one or the other.

My guess is that you did it that way to deal with the A33? If so, we
can just request the cell size to be 1 for now, and then expand it to
an enum later on when we'll support the A33.

> +  nvmem-cells:
> +    items:
> +      - description: ths calibrate data
> +
> +  nvmem-cell-names:
> +    items:
> +      - const: calib

Same remark than for the clocks

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - reset
> +  - clocks
> +  - clock-names

I guess you'd need #thermal-sensor-cells too?

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com