From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.1 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0FE1DC07542 for ; Mon, 27 May 2019 16:22:45 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id DE3A52166E for ; Mon, 27 May 2019 16:22:44 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=megous.com header.i=@megous.com header.b="cQyrKuue" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726966AbfE0QWn (ORCPT ); Mon, 27 May 2019 12:22:43 -0400 Received: from vps.xff.cz ([195.181.215.36]:52568 "EHLO vps.xff.cz" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726757AbfE0QWm (ORCPT ); Mon, 27 May 2019 12:22:42 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=megous.com; s=mail; t=1558974160; bh=nngIr0xvxUzPFucWAhkm6BkX4oH0a0zOi33I9wUZi5w=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=cQyrKuueeB+WVAEMvYTzh1ZQzRGSjXkA2vn1vFnjbas7ys8YHOyucByJv/ZYO1si/ dLMZWBpaCtXBWdZEYZd9m1Kf3d6gVRzObfX21aIUMYFPpadVhe0dOy01xlEjawxKl4 9AWEEKXZF45HMJfhctOpZoF9YmjC0d29THiuKt0k= From: megous@megous.com To: linux-sunxi@googlegroups.com, Maxime Ripard , Chen-Yu Tsai , Rob Herring Cc: Ondrej Jirman , David Airlie , Daniel Vetter , Mark Rutland , Giuseppe Cavallaro , Alexandre Torgue , Jose Abreu , "David S. Miller" , Maxime Coquelin , dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com Subject: [PATCH v6 3/6] arm64: dts: allwinner: orange-pi-3: Enable ethernet Date: Mon, 27 May 2019 18:22:34 +0200 Message-Id: <20190527162237.18495-4-megous@megous.com> In-Reply-To: <20190527162237.18495-1-megous@megous.com> References: <20190527162237.18495-1-megous@megous.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Ondrej Jirman Orange Pi 3 has two regulators that power the Realtek RTL8211E. According to the phy datasheet, both regulators need to be enabled at the same time, but we can only specify a single phy-supply in the DT. This can be achieved by making one regulator depedning on the other via vin-supply. While it's not a technically correct description of the hardware, it achieves the purpose. All values of RX/TX delay were tested exhaustively and a middle one of the working values was chosen. Signed-off-by: Ondrej Jirman --- .../dts/allwinner/sun50i-h6-orangepi-3.dts | 44 +++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index 17d496990108..2c6807b74ff6 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -15,6 +15,7 @@ aliases { serial0 = &uart0; + ethernet0 = &emac; }; chosen { @@ -44,6 +45,27 @@ regulator-max-microvolt = <5000000>; regulator-always-on; }; + + /* + * The board uses 2.5V RGMII signalling. Power sequence to enable + * the phy is to enable GMAC-2V5 and GMAC-3V (aldo2) power rails + * at the same time and to wait 100ms. + */ + reg_gmac_2v5: gmac-2v5 { + compatible = "regulator-fixed"; + regulator-name = "gmac-2v5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ + + /* The real parent of gmac-2v5 is reg_vcc5v, but we need to + * enable two regulators to power the phy. This is one way + * to achieve that. + */ + vin-supply = <®_aldo2>; /* GMAC-3V */ + }; }; &cpu0 { @@ -58,6 +80,28 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&ext_rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_gmac_2v5>; + allwinner,rx-delay-ps = <1500>; + allwinner,tx-delay-ps = <700>; + status = "okay"; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + + reset-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */ + reset-assert-us = <15000>; + reset-deassert-us = <40000>; + }; +}; + &mmc0 { vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ -- 2.21.0