linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: andy.gross@linaro.org, linux-arm-msm@vger.kernel.org,
	linux-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
	rohitkr@codeaurora.org, bgoswami@codeaurora.org
Subject: Re: [PATCH v2] qcom: apr: Make apr callbacks in non-atomic context
Date: Tue, 28 May 2019 18:04:10 -0700	[thread overview]
Message-ID: <20190529010410.GA24059@builder> (raw)
In-Reply-To: <20190208175510.26837-1-srinivas.kandagatla@linaro.org>

On Fri 08 Feb 09:55 PST 2019, Srinivas Kandagatla wrote:

> APR communication with DSP is not atomic in nature.
> Its request-response type. Trying to pretend that these are atomic
> and invoking apr client callbacks directly under atomic/irq context has
> endless issues with soundcard. It makes more sense to convert these
> to nonatomic calls. This also coverts all the dais to be nonatomic.
> 
> All the callbacks are now invoked as part of rx work queue.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Picked up

Thanks,
Bjorn

> ---
> Changes since v1:
>  - flush and destroy work queue after removing the device
> 	 to avoid active communication from device. suggested by Bjorn.
> 
>  drivers/soc/qcom/apr.c | 74 +++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 69 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/soc/qcom/apr.c b/drivers/soc/qcom/apr.c
> index 74f8b9607daa..039e3aa6f5e0 100644
> --- a/drivers/soc/qcom/apr.c
> +++ b/drivers/soc/qcom/apr.c
> @@ -8,6 +8,7 @@
>  #include <linux/spinlock.h>
>  #include <linux/idr.h>
>  #include <linux/slab.h>
> +#include <linux/workqueue.h>
>  #include <linux/of_device.h>
>  #include <linux/soc/qcom/apr.h>
>  #include <linux/rpmsg.h>
> @@ -17,8 +18,18 @@ struct apr {
>  	struct rpmsg_endpoint *ch;
>  	struct device *dev;
>  	spinlock_t svcs_lock;
> +	spinlock_t rx_lock;
>  	struct idr svcs_idr;
>  	int dest_domain_id;
> +	struct workqueue_struct *rxwq;
> +	struct work_struct rx_work;
> +	struct list_head rx_list;
> +};
> +
> +struct apr_rx_buf {
> +	struct list_head node;
> +	int len;
> +	uint8_t buf[];
>  };
>  
>  /**
> @@ -62,11 +73,7 @@ static int apr_callback(struct rpmsg_device *rpdev, void *buf,
>  				  int len, void *priv, u32 addr)
>  {
>  	struct apr *apr = dev_get_drvdata(&rpdev->dev);
> -	uint16_t hdr_size, msg_type, ver, svc_id;
> -	struct apr_device *svc = NULL;
> -	struct apr_driver *adrv = NULL;
> -	struct apr_resp_pkt resp;
> -	struct apr_hdr *hdr;
> +	struct apr_rx_buf *abuf;
>  	unsigned long flags;
>  
>  	if (len <= APR_HDR_SIZE) {
> @@ -75,6 +82,34 @@ static int apr_callback(struct rpmsg_device *rpdev, void *buf,
>  		return -EINVAL;
>  	}
>  
> +	abuf = kzalloc(sizeof(*abuf) + len, GFP_ATOMIC);
> +	if (!abuf)
> +		return -ENOMEM;
> +
> +	abuf->len = len;
> +	memcpy(abuf->buf, buf, len);
> +
> +	spin_lock_irqsave(&apr->rx_lock, flags);
> +	list_add_tail(&abuf->node, &apr->rx_list);
> +	spin_unlock_irqrestore(&apr->rx_lock, flags);
> +
> +	queue_work(apr->rxwq, &apr->rx_work);
> +
> +	return 0;
> +}
> +
> +
> +static int apr_do_rx_callback(struct apr *apr, struct apr_rx_buf *abuf)
> +{
> +	uint16_t hdr_size, msg_type, ver, svc_id;
> +	struct apr_device *svc = NULL;
> +	struct apr_driver *adrv = NULL;
> +	struct apr_resp_pkt resp;
> +	struct apr_hdr *hdr;
> +	unsigned long flags;
> +	void *buf = abuf->buf;
> +	int len = abuf->len;
> +
>  	hdr = buf;
>  	ver = APR_HDR_FIELD_VER(hdr->hdr_field);
>  	if (ver > APR_PKT_VER + 1)
> @@ -132,6 +167,23 @@ static int apr_callback(struct rpmsg_device *rpdev, void *buf,
>  	return 0;
>  }
>  
> +static void apr_rxwq(struct work_struct *work)
> +{
> +	struct apr *apr = container_of(work, struct apr, rx_work);
> +	struct apr_rx_buf *abuf, *b;
> +	unsigned long flags;
> +
> +	if (!list_empty(&apr->rx_list)) {
> +		list_for_each_entry_safe(abuf, b, &apr->rx_list, node) {
> +			apr_do_rx_callback(apr, abuf);
> +			spin_lock_irqsave(&apr->rx_lock, flags);
> +			list_del(&abuf->node);
> +			spin_unlock_irqrestore(&apr->rx_lock, flags);
> +			kfree(abuf);
> +		}
> +	}
> +}
> +
>  static int apr_device_match(struct device *dev, struct device_driver *drv)
>  {
>  	struct apr_device *adev = to_apr_device(dev);
> @@ -285,6 +337,14 @@ static int apr_probe(struct rpmsg_device *rpdev)
>  	dev_set_drvdata(dev, apr);
>  	apr->ch = rpdev->ept;
>  	apr->dev = dev;
> +	apr->rxwq = create_singlethread_workqueue("qcom_apr_rx");
> +	if (!apr->rxwq) {
> +		dev_err(apr->dev, "Failed to start Rx WQ\n");
> +		return -ENOMEM;
> +	}
> +	INIT_WORK(&apr->rx_work, apr_rxwq);
> +	INIT_LIST_HEAD(&apr->rx_list);
> +	spin_lock_init(&apr->rx_lock);
>  	spin_lock_init(&apr->svcs_lock);
>  	idr_init(&apr->svcs_idr);
>  	of_register_apr_devices(dev);
> @@ -303,7 +363,11 @@ static int apr_remove_device(struct device *dev, void *null)
>  
>  static void apr_remove(struct rpmsg_device *rpdev)
>  {
> +	struct apr *apr = dev_get_drvdata(&rpdev->dev);
> +
>  	device_for_each_child(&rpdev->dev, NULL, apr_remove_device);
> +	flush_workqueue(apr->rxwq);
> +	destroy_workqueue(apr->rxwq);
>  }
>  
>  /*
> -- 
> 2.20.1
> 

      reply	other threads:[~2019-05-29  1:04 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-08 17:55 [PATCH v2] qcom: apr: Make apr callbacks in non-atomic context Srinivas Kandagatla
2019-05-29  1:04 ` Bjorn Andersson [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190529010410.GA24059@builder \
    --to=bjorn.andersson@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=bgoswami@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=rohitkr@codeaurora.org \
    --cc=srinivas.kandagatla@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).