Re: [Freedreno] [PATCH RFC v2 0/6] ARM: qcom: initial Nexus 5 display support

[Brian Masney <masneyb@onstation.org>]

[-- Attachment #1: Type: text/plain, Size: 2022 bytes --]

On Tue, May 28, 2019 at 08:53:49PM -0600, Jeffrey Hugo wrote:
> On Tue, May 28, 2019 at 8:46 PM Brian Masney <masneyb@onstation.org> wrote:
> >
> > On Tue, May 28, 2019 at 07:42:19PM -0600, Jeffrey Hugo wrote:
> > > > > Do you know if the nexus 5 has a video or command mode panel?  There
> > > > > is some glitchyness with vblanks and command mode panels.
> > > >
> > > > Its in command mode. I know this because I see two 'pp done time out'
> > > > messages, even on 4.17. Based on my understanding, the ping pong code is
> > > > only applicable for command mode panels.
> > >
> > > Actually, the ping pong element exists in both modes, but 'pp done
> > > time out' is a good indicator that it is command mode.
> > >
> > > Are you also seeing vblank timeouts?
> >
> > Yes, here's a snippet of the first one.
> >
> > [    2.556014] WARNING: CPU: 0 PID: 5 at drivers/gpu/drm/drm_atomic_helper.c:1429 drm_atomic_helper_wait_for_vblanks.part.1+0x288/0x290
> > [    2.556020] [CRTC:49:crtc-0] vblank wait timed out
> > [    2.556023] Modules linked in:
> > [    2.556034] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.2.0-rc1-00178-g72c3c1fd5f86-dirty #426
> > [    2.556038] Hardware name: Generic DT based system
> > [    2.556056] Workqueue: events deferred_probe_work_func
> > ...
> >
> > > Do you have busybox?
> > >
> > > Can you run -
> > > sudo busybox devmem 0xFD900614
> > > sudo busybox devmem 0xFD900714
> > > sudo busybox devmem 0xFD900814
> > > sudo busybox devmem 0xFD900914
> > > sudo busybox devmem 0xFD900A14
> >
> > # busybox devmem 0xFD900614
> > 0x00020020
> 
> Ok, so CTL_0 path, command mode, ping pong 0, with the output going to DSI 1.
> 
> Next one please:
> 
> busybox devmem 0xFD912D30

It's 0x00000000 on mainline and 4.17. I used the following script to
dump the entire mdp5 memory region and attached the dump from 4.17 and
5.2rc1.

	POS="0XFD900100"
	while [ "${POS}" != "0XFD925000" ] ; do
		echo -n "${POS} = "
		busybox devmem "${POS}" 
		POS=$(printf '%#X' "$((${POS} + 4))")
	done

Brian

[-- Attachment #2: mdp-memory-dump-4.17.txt.gz --]
[-- Type: application/gzip, Size: 102937 bytes --]

[-- Attachment #3: mdp-memory-dump-5.2rc1.txt.gz --]
[-- Type: application/gzip, Size: 103222 bytes --]