linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Yang Weijiang <weijiang.yang@intel.com>
Cc: pbonzini@redhat.com, mst@redhat.com, rkrcmar@redhat.com,
	jmattson@google.com, linux-kernel@vger.kernel.org,
	kvm@vger.kernel.org, yu-cheng.yu@intel.com
Subject: Re: [PATCH v5 4/8] KVM: VMX: Pass through CET related MSRs to Guest
Date: Tue, 4 Jun 2019 12:59:02 -0700	[thread overview]
Message-ID: <20190604195902.GB7476@linux.intel.com> (raw)
In-Reply-To: <20190522070101.7636-5-weijiang.yang@intel.com>

On Wed, May 22, 2019 at 03:00:57PM +0800, Yang Weijiang wrote:
> CET MSRs pass through Guest directly to enhance performance.
> CET runtime control settings are stored in MSR_IA32_{U,S}_CET,
> Shadow Stack Pointer(SSP) are presented in MSR_IA32_PL{0,1,2,3}_SSP,
> SSP table base address is stored in MSR_IA32_INT_SSP_TAB,
> these MSRs are defined in kernel and re-used here.
> 
> MSR_IA32_U_CET and MSR_IA32_PL3_SSP are used for user mode protection,
> the contents could differ from process to process, therefore,
> kernel needs to save/restore them during context switch, so it makes
> sense to pass through them so that the guest kernel can
> use xsaves/xrstors to operate them efficiently. Ohter MSRs are used
> for non-user mode protection. See CET spec for detailed info.
> 
> The difference between CET VMCS state fields and xsave components is,
> the former used for CET state storage during VMEnter/VMExit,
> whereas the latter used for state retention between Guest task/process
> switch.
> 
> Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
> Co-developed-by: Zhang Yi Z <yi.z.zhang@linux.intel.com>
> ---
>  arch/x86/kvm/vmx/vmx.c | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> index 574428375ff9..9321da538f65 100644
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -6942,6 +6942,7 @@ static void update_intel_pt_cfg(struct kvm_vcpu *vcpu)
>  static void vmx_cpuid_update(struct kvm_vcpu *vcpu)
>  {
>  	struct vcpu_vmx *vmx = to_vmx(vcpu);
> +	unsigned long *msr_bitmap;
>  
>  	if (cpu_has_secondary_exec_ctrls()) {
>  		vmx_compute_secondary_exec_control(vmx);
> @@ -6963,6 +6964,19 @@ static void vmx_cpuid_update(struct kvm_vcpu *vcpu)
>  	if (boot_cpu_has(X86_FEATURE_INTEL_PT) &&
>  			guest_cpuid_has(vcpu, X86_FEATURE_INTEL_PT))
>  		update_intel_pt_cfg(vcpu);
> +
> +	msr_bitmap = vmx->vmcs01.msr_bitmap;
> +
> +	if (guest_cpuid_has(vcpu, X86_FEATURE_SHSTK) ||
> +	    guest_cpuid_has(vcpu, X86_FEATURE_IBT)) {
> +		vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_U_CET, MSR_TYPE_RW);
> +		vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_S_CET, MSR_TYPE_RW);
> +		vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_INT_SSP_TAB, MSR_TYPE_RW);
> +		vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_PL0_SSP, MSR_TYPE_RW);
> +		vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_PL1_SSP, MSR_TYPE_RW);
> +		vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_PL2_SSP, MSR_TYPE_RW);
> +		vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_PL3_SSP, MSR_TYPE_RW);
> +	}
>  }
>  
>  static void vmx_set_supported_cpuid(u32 func, struct kvm_cpuid_entry2 *entry)
> @@ -7163,6 +7177,7 @@ static void __pi_post_block(struct kvm_vcpu *vcpu)
>  		spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
>  		vcpu->pre_pcpu = -1;
>  	}
> +

Spurious whitespace change.

>  }
>  
>  /*
> -- 
> 2.17.2
> 

  reply	other threads:[~2019-06-04 19:59 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-22  7:00 [PATCH v5 0/8] Introduce support for Guest CET feature Yang Weijiang
2019-05-22  7:00 ` [PATCH v5 1/8] KVM: VMX: Define CET VMCS fields and control bits Yang Weijiang
2019-06-04 14:46   ` Sean Christopherson
2019-06-05  2:30     ` Yang Weijiang
2019-05-22  7:00 ` [PATCH v5 2/8] KVM: x86: Implement CET CPUID support for Guest Yang Weijiang
2019-06-04 19:58   ` Sean Christopherson
2019-06-05  2:51     ` Yang Weijiang
2019-05-22  7:00 ` [PATCH v5 3/8] KVM: x86: Fix XSAVE size calculation issue Yang Weijiang
2019-05-22  7:00 ` [PATCH v5 4/8] KVM: VMX: Pass through CET related MSRs to Guest Yang Weijiang
2019-06-04 19:59   ` Sean Christopherson [this message]
2019-05-22  7:00 ` [PATCH v5 5/8] KVM: VMX: Load Guest CET via VMCS when CET is enabled in Guest Yang Weijiang
2019-06-04 20:03   ` Sean Christopherson
2019-06-05  1:49     ` Yang Weijiang
2019-05-22  7:00 ` [PATCH v5 6/8] KVM: x86: Allow Guest to set supported bits in XSS Yang Weijiang
2019-05-22  7:01 ` [PATCH v5 7/8] KVM: x86: Load Guest fpu state when accessing MSRs managed by XSAVES Yang Weijiang
2019-05-22  7:01 ` [PATCH v5 8/8] KVM: x86: Add user-space access interface for CET MSRs Yang Weijiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190604195902.GB7476@linux.intel.com \
    --to=sean.j.christopherson@intel.com \
    --cc=jmattson@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=rkrcmar@redhat.com \
    --cc=weijiang.yang@intel.com \
    --cc=yu-cheng.yu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).