From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-9.1 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,FREEMAIL_FORGED_FROMDOMAIN,FREEMAIL_FROM, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY, SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 2B3DDC04AB5 for ; Thu, 6 Jun 2019 22:22:49 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id E775320673 for ; Thu, 6 Jun 2019 22:22:48 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="iHFoH1CP" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729256AbfFFWWs (ORCPT ); Thu, 6 Jun 2019 18:22:48 -0400 Received: from mail-wr1-f68.google.com ([209.85.221.68]:39770 "EHLO mail-wr1-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729182AbfFFWWr (ORCPT ); Thu, 6 Jun 2019 18:22:47 -0400 Received: by mail-wr1-f68.google.com with SMTP id x4so193272wrt.6; Thu, 06 Jun 2019 15:22:45 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id; bh=8HB0xFXnBLxUfHqZ0Zttc4lJLneDgdEO2LsiuqrZzHI=; b=iHFoH1CPPxQMvqhNtNSsB4gT8yIUlYxO6c9xUCJ5QUIiDcD9QRLx4J4IU+NZ/YEbo5 Dcqw51z3f+GZ+aIyDYmtxeUmsAOuMhxqdQKtpQZ4K3rsZigN0XAIpAfC1QWyOSgYROft 8R+yPCn7F3KKpsZd7hNBXPP1sWE1atsQKeA8SRj4RuzsWrFdQcjd5O523KJA1jFiWlI5 nsqPcxcU0NL6tD8a+Oycz/a2R4lB1iIKRUik0/i6fMrruvzLahhvH6XRKwFczDvbPjf+ D+SjRUgjyL19OJAQ47oP0EwEoG6Qm6LAvpNhndd15T7apKSm7grur2mSEeIQ2ltVwKuk 7T5A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id; bh=8HB0xFXnBLxUfHqZ0Zttc4lJLneDgdEO2LsiuqrZzHI=; b=J73ziY1UNK5uT1sPm+OB1k+tBf/O8tgkm6bk7hVao5DWGeUHLHKGM3Sil2/pqfUA+0 boz3SqIhQMI5b8lY5BM2IYVZlW23hnDZlOJWKeNZa87P7O7VSmHvH/qtmn0GmWmhS75G nMytoev7mPnfafK/p9y7DdU21GuYxDZhnHloC2a0yQoQDSgJ+hqRjqeEmdP5Jbw917AJ 3PyYqYY7jIb7khEHkk6QDJq/W2Dam6az+BdDIt8Tirb6i/7anpo+Vg3OvNm7jA7ojuSD aQBBu41aQjH5QrLS9JZ+AI1g62deUSiQ+DRKjNKNuTDU6KRc0XlTOzy3bWB966ma8hPB gfBQ== X-Gm-Message-State: APjAAAXqK/Bm/DdafMTs5g1moI1oaDInqB38omXLvz98Ltuy42cKVN4v QzltjKkBFcd93+33r+9HgBc= X-Google-Smtp-Source: APXvYqznYsxSJmLXAKRuSZLOPDjMkbTahz8S0FO9cJMGM0PrdRtqygVPkhlq8ja3EA3m8zhTTPbdZQ== X-Received: by 2002:adf:dd51:: with SMTP id u17mr16859197wrm.218.1559859764610; Thu, 06 Jun 2019 15:22:44 -0700 (PDT) Received: from localhost.localdomain (5-12-124-26.residential.rdsnet.ro. [5.12.124.26]) by smtp.gmail.com with ESMTPSA id o126sm236436wmo.31.2019.06.06.15.22.43 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Thu, 06 Jun 2019 15:22:43 -0700 (PDT) From: Vladimir Oltean To: shawnguo@kernel.org Cc: leoyang.li@nxp.com, robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Vladimir Oltean Subject: [PATCH v3] ARM: dts: Introduce the NXP LS1021A-TSN board Date: Fri, 7 Jun 2019 01:21:30 +0300 Message-Id: <20190606222130.27515-1-olteanv@gmail.com> X-Mailer: git-send-email 2.17.1 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The LS1021A-TSN is a development board built by VVDN/Argonboards in partnership with NXP. It features the LS1021A SoC and the first-generation SJA1105T Ethernet switch for prototyping implementations of a subset of IEEE 802.1 TSN standards. It has two regular Ethernet ports and four switched, TSN-capable ports. It also features: - One Arduino header - One expansion header - Two USB 3.0 ports - One mini PCIe slot - One SATA interface - Accelerometer, gyroscope, temperature sensors Signed-off-by: Vladimir Oltean --- Changes from v2: - Sorted nodes alphabetically - Renamed SAI2 codec node into audio-codec v2 patch available at: https://lkml.org/lkml/2019/5/29/998 Changes from v1: - Applied Shawn's feedback - Introduced QSPI flash node v1 patch available at: https://patchwork.kernel.org/patch/10930451/ arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/ls1021a-tsn.dts | 289 ++++++++++++++++++++++++++++++ 2 files changed, 290 insertions(+) create mode 100644 arch/arm/boot/dts/ls1021a-tsn.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index dab2914fa293..a4eb4ca5e148 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -602,6 +602,7 @@ dtb-$(CONFIG_SOC_IMX7ULP) += \ dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ + ls1021a-tsn.dtb \ ls1021a-twr.dtb dtb-$(CONFIG_SOC_VF610) += \ vf500-colibri-eval-v3.dtb \ diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts new file mode 100644 index 000000000000..ef4a0b1e4d47 --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-tsn.dts @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright 2016-2018 NXP Semiconductors + * Copyright 2019 Vladimir Oltean + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "NXP LS1021A-TSN Board"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_vdda_codec: regulator-3V3 { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vddio_codec: regulator-2V5 { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; +}; + +&dspi0 { + bus-num = <0>; + status = "okay"; + + /* ADG704BRMZ 1:4 SPI mux/demux */ + sja1105: ethernet-switch@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,sja1105t"; + /* 12 MHz */ + spi-max-frequency = <12000000>; + /* Sample data on trailing clock edge */ + spi-cpha; + /* SPI controller settings for SJA1105 timing requirements */ + fsl,spi-cs-sck-delay = <1000>; + fsl,spi-sck-cs-delay = <1000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + /* ETH5 written on chassis */ + label = "swp5"; + phy-handle = <&rgmii_phy6>; + phy-mode = "rgmii-id"; + reg = <0>; + }; + + port@1 { + /* ETH2 written on chassis */ + label = "swp2"; + phy-handle = <&rgmii_phy3>; + phy-mode = "rgmii-id"; + reg = <1>; + }; + + port@2 { + /* ETH3 written on chassis */ + label = "swp3"; + phy-handle = <&rgmii_phy4>; + phy-mode = "rgmii-id"; + reg = <2>; + }; + + port@3 { + /* ETH4 written on chassis */ + label = "swp4"; + phy-handle = <&rgmii_phy5>; + phy-mode = "rgmii-id"; + reg = <3>; + }; + + port@4 { + /* Internal port connected to eth2 */ + ethernet = <&enet2>; + phy-mode = "rgmii"; + reg = <4>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&i2c0 { + status = "okay"; + + /* 3 axis accelerometer */ + accelerometer@1e { + compatible = "fsl,fxls8471"; + position = <0>; + reg = <0x1e>; + }; + + /* Audio codec (SAI2) */ + audio-codec@2a { + compatible = "fsl,sgtl5000"; + VDDIO-supply = <®_vddio_codec>; + VDDA-supply = <®_vdda_codec>; + #sound-dai-cells = <0>; + clocks = <&sys_mclk>; + reg = <0x2a>; + }; + + /* Current sensing circuit for 1V VDDCORE PMIC rail */ + current-sensor@44 { + compatible = "ti,ina220"; + shunt-resistor = <1000>; + reg = <0x44>; + }; + + /* Current sensing circuit for 12V VCC rail */ + current-sensor@45 { + compatible = "ti,ina220"; + shunt-resistor = <1000>; + reg = <0x45>; + }; + + /* Thermal monitor - case */ + temperature-sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + /* Thermal monitor - chip */ + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + }; + + /* Unsupported devices: + * - FXAS21002C Gyroscope at 0x20 + * - TI ADS7924 4-channel ADC at 0x49 + */ +}; + +&ifc { + status = "disabled"; +}; + +&enet0 { + tbi-handle = <&tbi0>; + phy-handle = <&sgmii_phy2>; + phy-mode = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&sgmii_phy1>; + phy-mode = "sgmii"; + status = "okay"; +}; + +/* RGMII delays added via PCB traces */ +&enet2 { + phy-mode = "rgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&esdhc { + status = "okay"; +}; + +&lpuart0 { + status = "okay"; +}; + +&lpuart3 { + status = "okay"; +}; + +&mdio0 { + /* AR8031 */ + sgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + /* AR8031 */ + sgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + /* BCM5464 quad PHY */ + rgmii_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + rgmii_phy4: ethernet-phy@4 { + reg = <0x4>; + }; + + rgmii_phy5: ethernet-phy@5 { + reg = <0x5>; + }; + + rgmii_phy6: ethernet-phy@6 { + reg = <0x6>; + }; + + /* SGMII PCS for enet0 */ + tbi0: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&mdio1 { + /* SGMII PCS for enet1 */ + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&qspi { + status = "okay"; + + flash@0 { + /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */ + compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s"; + spi-max-frequency = <20000000>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "RCW"; + reg = <0x0 0x40000>; + }; + + partition@40000 { + label = "U-Boot"; + reg = <0x40000 0x300000>; + }; + + partition@340000 { + label = "U-Boot Env"; + reg = <0x340000 0x100000>; + }; + }; + }; +}; + +&sai2 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; -- 2.17.1