[PATCH 4.14 00/69] 4.14.124-stable review

[PATCH 4.14 00/69] 4.14.124-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.124 release.
There are 69 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun 09 Jun 2019 03:37:08 PM UTC.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.124-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.124-rc1

Nadav Amit <namit@vmware.com>
    media: uvcvideo: Fix uvc_alloc_entity() allocation alignment

Todd Kjos <tkjos@android.com>
    binder: fix race between munmap() and direct reclaim

Todd Kjos <tkjos@android.com>
    Revert "binder: fix handling of misaligned binder object"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "x86/build: Move _etext to actual end of .text"

Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
    include/linux/module.h: copy __init/__exit attrs to init/cleanup_module

Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
    Compiler Attributes: add support for __copy (gcc >= 9)

Vicente Bergas <vicencb@gmail.com>
    drm/rockchip: shutdown drm subsystem on shutdown

Thomas Hellstrom <thellstrom@vmware.com>
    drm/vmwgfx: Don't send drm sysfs hotplug events on initial master set

Kees Cook <keescook@chromium.org>
    gcc-plugins: Fix build failures under Darwin host

Benjamin Coddington <bcodding@redhat.com>
    Revert "lockd: Show pid of lockd for remote locks"

Roberto Bergantinos Corpas <rbergant@redhat.com>
    CIFS: cifs_read_allocate_pages: don't iterate through whole page array on ENOMEM

Tim Collier <osdevtc@gmail.com>
    staging: wlan-ng: fix adapter initialization failure

Dan Carpenter <dan.carpenter@oracle.com>
    staging: vc04_services: prevent integer overflow in create_pagelist()

George G. Davis <george_davis@mentor.com>
    serial: sh-sci: disable DMA for uart_console

Roberto Sassu <roberto.sassu@huawei.com>
    ima: show rules with IMA_INMASK correctly

Jonathan Corbet <corbet@lwn.net>
    doc: Cope with Sphinx logging deprecations

Jonathan Corbet <corbet@lwn.net>
    doc: Cope with the deprecation of AutoReporter

Jonathan Corbet <corbet@lwn.net>
    docs: Fix conf.py for Sphinx 2.0

Zhenliang Wei <weizhenliang@huawei.com>
    kernel/signal.c: trace_signal_deliver when signal_group_exit

Jiri Slaby <jslaby@suse.cz>
    memcg: make it work on sparse non-0-node systems

Joe Burmeister <joe.burmeister@devtank.co.uk>
    tty: max310x: Fix external crystal register setup

Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
    tty: serial: msm_serial: Fix XON/XOFF

Lyude Paul <lyude@redhat.com>
    drm/nouveau/i2c: Disable i2c bus access after ->fini()

Thomas Huth <thuth@redhat.com>
    KVM: s390: Do not report unusabled IDs via KVM_CAP_MAX_VCPU_ID

Kailang Yang <kailang@realtek.com>
    ALSA: hda/realtek - Set default power save node to 0

Ravi Bangoria <ravi.bangoria@linux.ibm.com>
    powerpc/perf: Fix MMCRA corruption by bhrb_filter

Cédric Le Goater <clg@kaod.org>
    KVM: PPC: Book3S HV: XIVE: Do not clear IRQ data of passthrough interrupts

Filipe Manana <fdmanana@suse.com>
    Btrfs: incremental send, fix file corruption when no-holes feature is enabled

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix fsync not persisting changed attributes of a directory

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix race updating log root item during fsync

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix wrong ctime and mtime of a directory after log replay

Steffen Maier <maier@linux.ibm.com>
    scsi: zfcp: fix to prevent port_remove with pure auto scan LUNs (only sdevs)

Steffen Maier <maier@linux.ibm.com>
    scsi: zfcp: fix missing zfcp_port reference put on -EBUSY from port_remove

Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
    media: smsusb: better handle optional alignment

Alan Stern <stern@rowland.harvard.edu>
    media: usb: siano: Fix false-positive "uninitialized variable" warning

Alan Stern <stern@rowland.harvard.edu>
    media: usb: siano: Fix general protection fault in smsusb

Oliver Neukum <oneukum@suse.com>
    USB: rio500: fix memory leak in close after disconnect

Oliver Neukum <oneukum@suse.com>
    USB: rio500: refuse more than one device at a time

Maximilian Luz <luzmaximilian@gmail.com>
    USB: Add LPM quirk for Surface Dock GigE adapter

Oliver Neukum <oneukum@suse.com>
    USB: sisusbvga: fix oops in error path of sisusb_probe

Alan Stern <stern@rowland.harvard.edu>
    USB: Fix slab-out-of-bounds write in usb_get_bos_descriptor

Shuah Khan <skhan@linuxfoundation.org>
    usbip: usbip_host: fix stub_dev lock context imbalance regression

Shuah Khan <skhan@linuxfoundation.org>
    usbip: usbip_host: fix BUG: sleeping function called from invalid context

Carsten Schmid <carsten_schmid@mentor.com>
    usb: xhci: avoid null pointer deref when bos field is NULL

Andrey Smirnov <andrew.smirnov@gmail.com>
    xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()

Fabio Estevam <festevam@gmail.com>
    xhci: Use %zu for printing size_t type

Henry Lin <henryl@nvidia.com>
    xhci: update bounce buffer with correct sg num

Rasmus Villemoes <linux@rasmusvillemoes.dk>
    include/linux/bitops.h: sanitize rotate primitives

James Clarke <jrtc27@jrtc27.com>
    sparc64: Fix regression in non-hypervisor TLB flush xcall

Junwei Hu <hujunwei4@huawei.com>
    tipc: fix modprobe tipc failed after switch order of device registration

David S. Miller <davem@davemloft.net>
    Revert "tipc: fix modprobe tipc failed after switch order of device registration"

Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
    xen/pciback: Don't disable PCI_COMMAND on PCI device reset.

Daniel Axtens <dja@axtens.net>
    crypto: vmx - ghash: do nosimd fallback manually

Russell King <rmk+kernel@armlinux.org.uk>
    net: phy: marvell10g: report if the PHY fails to boot firmware

Antoine Tenart <antoine.tenart@bootlin.com>
    net: mvpp2: fix bad MVPP2_TXQ_SCHED_TOKEN_CNTR_REG queue value

Jisheng Zhang <Jisheng.Zhang@synaptics.com>
    net: mvneta: Fix err code path of probe

Rasmus Villemoes <rasmus.villemoes@prevas.dk>
    net: dsa: mv88e6xxx: fix handling of upper half of STATS_TYPE_PORT

Eric Dumazet <edumazet@google.com>
    ipv4/igmp: fix build error if !CONFIG_IP_MULTICAST

Eric Dumazet <edumazet@google.com>
    ipv4/igmp: fix another memory leak in igmpv3_del_delrec()

Michael Chan <michael.chan@broadcom.com>
    bnxt_en: Fix aggregation buffer leak under OOM condition.

Parav Pandit <parav@mellanox.com>
    net/mlx5: Allocate root ns memory using kzalloc to match kfree

Chris Packham <chris.packham@alliedtelesis.co.nz>
    tipc: Avoid copying bytes beyond the supplied data

Kloetzke Jan <Jan.Kloetzke@preh.de>
    usbnet: fix kernel crash after disconnect

Jisheng Zhang <Jisheng.Zhang@synaptics.com>
    net: stmmac: fix reset gpio free missing

Eric Dumazet <edumazet@google.com>
    net-gro: fix use-after-free read in napi_gro_frags()

Andy Duan <fugang.duan@nxp.com>
    net: fec: fix the clk mismatch in failed_reset path

Eric Dumazet <edumazet@google.com>
    llc: fix skb leak in llc_build_and_send_ui_pkt()

Mike Manning <mmanning@vyatta.att-mail.com>
    ipv6: Consider sk_bound_dev_if when binding a raw socket to an address

Eric Dumazet <edumazet@google.com>
    inet: switch IP ID generator to siphash


-------------

Diffstat:

 Documentation/conf.py                              |   2 +-
 Documentation/sphinx/kerneldoc.py                  |  44 +++--
 Documentation/sphinx/kernellog.py                  |  28 +++
 Documentation/sphinx/kfigure.py                    |  40 ++--
 Makefile                                           |   4 +-
 arch/mips/kvm/mips.c                               |   3 +
 arch/powerpc/kvm/book3s_xive.c                     |   4 +-
 arch/powerpc/kvm/powerpc.c                         |   3 +
 arch/powerpc/perf/core-book3s.c                    |   6 +-
 arch/powerpc/perf/power8-pmu.c                     |   3 +
 arch/powerpc/perf/power9-pmu.c                     |   3 +
 arch/s390/kvm/kvm-s390.c                           |   1 +
 arch/sparc/mm/ultra.S                              |   4 +-
 arch/x86/kernel/vmlinux.lds.S                      |   6 +-
 arch/x86/kvm/x86.c                                 |   3 +
 drivers/crypto/vmx/ghash.c                         | 213 +++++++++------------
 drivers/gpu/drm/nouveau/include/nvkm/subdev/i2c.h  |   2 +
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/aux.c      |  26 ++-
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/aux.h      |   2 +
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/base.c     |  15 ++
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/bus.c      |  21 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/bus.h      |   1 +
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c        |   9 +
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.c                |   8 +-
 drivers/media/usb/siano/smsusb.c                   |  33 ++--
 drivers/media/usb/uvc/uvc_driver.c                 |   2 +-
 drivers/net/dsa/mv88e6xxx/chip.c                   |   2 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt.c          |   2 +
 drivers/net/ethernet/freescale/fec_main.c          |   2 +-
 drivers/net/ethernet/marvell/mvneta.c              |   4 +-
 drivers/net/ethernet/marvell/mvpp2.c               |  10 +-
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c  |   2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c  |   3 +-
 drivers/net/phy/marvell10g.c                       |  14 ++
 drivers/net/usb/usbnet.c                           |   6 +
 drivers/s390/scsi/zfcp_ext.h                       |   1 +
 drivers/s390/scsi/zfcp_scsi.c                      |   9 +
 drivers/s390/scsi/zfcp_sysfs.c                     |  55 +++++-
 drivers/s390/scsi/zfcp_unit.c                      |   8 +-
 .../interface/vchiq_arm/vchiq_2835_arm.c           |   9 +
 drivers/staging/wlan-ng/hfa384x_usb.c              |   3 +-
 drivers/tty/serial/max310x.c                       |   2 +-
 drivers/tty/serial/msm_serial.c                    |   5 +-
 drivers/tty/serial/sh-sci.c                        |   7 +
 drivers/usb/core/config.c                          |   4 +-
 drivers/usb/core/quirks.c                          |   3 +
 drivers/usb/host/xhci-ring.c                       |  17 +-
 drivers/usb/host/xhci.c                            |  24 ++-
 drivers/usb/misc/rio500.c                          |  41 +++-
 drivers/usb/misc/sisusbvga/sisusb.c                |  15 +-
 drivers/usb/usbip/stub_dev.c                       |  75 +++++---
 drivers/xen/xen-pciback/pciback_ops.c              |   2 -
 fs/btrfs/inode.c                                   |  14 +-
 fs/btrfs/send.c                                    |   6 +
 fs/btrfs/tree-log.c                                |  20 +-
 fs/cifs/file.c                                     |   4 +-
 fs/lockd/xdr.c                                     |   4 +-
 fs/lockd/xdr4.c                                    |   4 +-
 include/linux/bitops.h                             |  16 +-
 include/linux/compiler-gcc.h                       |   4 +
 include/linux/compiler_types.h                     |   4 +
 include/linux/list_lru.h                           |   1 +
 include/linux/module.h                             |   4 +-
 include/linux/siphash.h                            |   5 +
 include/net/netns/ipv4.h                           |   2 +
 include/uapi/linux/tipc_config.h                   |  10 +-
 kernel/signal.c                                    |   2 +
 mm/list_lru.c                                      |   8 +-
 net/core/dev.c                                     |   2 +-
 net/ipv4/igmp.c                                    |  47 +++--
 net/ipv4/route.c                                   |  12 +-
 net/ipv6/output_core.c                             |  30 +--
 net/ipv6/raw.c                                     |   2 +
 net/llc/llc_output.c                               |   2 +
 net/tipc/core.c                                    |  32 ++--
 net/tipc/subscr.c                                  |  14 +-
 net/tipc/subscr.h                                  |   5 +-
 scripts/gcc-plugins/gcc-common.h                   |   4 +
 security/integrity/ima/ima_policy.c                |  21 +-
 sound/pci/hda/patch_realtek.c                      |   2 +-
 virt/kvm/arm/arm.c                                 |   3 +
 virt/kvm/kvm_main.c                                |   2 -
 82 files changed, 728 insertions(+), 369 deletions(-)

[PATCH 4.14 01/69] inet: switch IP ID generator to siphash

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit df453700e8d81b1bdafdf684365ee2b9431fb702 ]

According to Amit Klein and Benny Pinkas, IP ID generation is too weak
and might be used by attackers.

Even with recent net_hash_mix() fix (netns: provide pure entropy for net_hash_mix())
having 64bit key and Jenkins hash is risky.

It is time to switch to siphash and its 128bit keys.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Amit Klein <aksecurity@gmail.com>
Reported-by: Benny Pinkas <benny@pinkas.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/siphash.h  |    5 +++++
 include/net/netns/ipv4.h |    2 ++
 net/ipv4/route.c         |   12 +++++++-----
 net/ipv6/output_core.c   |   30 ++++++++++++++++--------------
 4 files changed, 30 insertions(+), 19 deletions(-)

--- a/include/linux/siphash.h
+++ b/include/linux/siphash.h
@@ -21,6 +21,11 @@ typedef struct {
 	u64 key[2];
 } siphash_key_t;
 
+static inline bool siphash_key_is_zero(const siphash_key_t *key)
+{
+	return !(key->key[0] | key->key[1]);
+}
+
 u64 __siphash_aligned(const void *data, size_t len, const siphash_key_t *key);
 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 u64 __siphash_unaligned(const void *data, size_t len, const siphash_key_t *key);
--- a/include/net/netns/ipv4.h
+++ b/include/net/netns/ipv4.h
@@ -9,6 +9,7 @@
 #include <linux/uidgid.h>
 #include <net/inet_frag.h>
 #include <linux/rcupdate.h>
+#include <linux/siphash.h>
 
 struct tcpm_hash_bucket;
 struct ctl_table_header;
@@ -164,5 +165,6 @@ struct netns_ipv4 {
 	unsigned int	fib_seq;	/* protected by rtnl_mutex */
 
 	atomic_t	rt_genid;
+	siphash_key_t	ip_id_key;
 };
 #endif
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -517,15 +517,17 @@ EXPORT_SYMBOL(ip_idents_reserve);
 
 void __ip_select_ident(struct net *net, struct iphdr *iph, int segs)
 {
-	static u32 ip_idents_hashrnd __read_mostly;
 	u32 hash, id;
 
-	net_get_random_once(&ip_idents_hashrnd, sizeof(ip_idents_hashrnd));
+	/* Note the following code is not safe, but this is okay. */
+	if (unlikely(siphash_key_is_zero(&net->ipv4.ip_id_key)))
+		get_random_bytes(&net->ipv4.ip_id_key,
+				 sizeof(net->ipv4.ip_id_key));
 
-	hash = jhash_3words((__force u32)iph->daddr,
+	hash = siphash_3u32((__force u32)iph->daddr,
 			    (__force u32)iph->saddr,
-			    iph->protocol ^ net_hash_mix(net),
-			    ip_idents_hashrnd);
+			    iph->protocol,
+			    &net->ipv4.ip_id_key);
 	id = ip_idents_reserve(hash, segs);
 	iph->id = htons(id);
 }
--- a/net/ipv6/output_core.c
+++ b/net/ipv6/output_core.c
@@ -10,15 +10,25 @@
 #include <net/secure_seq.h>
 #include <linux/netfilter.h>
 
-static u32 __ipv6_select_ident(struct net *net, u32 hashrnd,
+static u32 __ipv6_select_ident(struct net *net,
 			       const struct in6_addr *dst,
 			       const struct in6_addr *src)
 {
+	const struct {
+		struct in6_addr dst;
+		struct in6_addr src;
+	} __aligned(SIPHASH_ALIGNMENT) combined = {
+		.dst = *dst,
+		.src = *src,
+	};
 	u32 hash, id;
 
-	hash = __ipv6_addr_jhash(dst, hashrnd);
-	hash = __ipv6_addr_jhash(src, hash);
-	hash ^= net_hash_mix(net);
+	/* Note the following code is not safe, but this is okay. */
+	if (unlikely(siphash_key_is_zero(&net->ipv4.ip_id_key)))
+		get_random_bytes(&net->ipv4.ip_id_key,
+				 sizeof(net->ipv4.ip_id_key));
+
+	hash = siphash(&combined, sizeof(combined), &net->ipv4.ip_id_key);
 
 	/* Treat id of 0 as unset and if we get 0 back from ip_idents_reserve,
 	 * set the hight order instead thus minimizing possible future
@@ -41,7 +51,6 @@ static u32 __ipv6_select_ident(struct ne
  */
 __be32 ipv6_proxy_select_ident(struct net *net, struct sk_buff *skb)
 {
-	static u32 ip6_proxy_idents_hashrnd __read_mostly;
 	struct in6_addr buf[2];
 	struct in6_addr *addrs;
 	u32 id;
@@ -53,11 +62,7 @@ __be32 ipv6_proxy_select_ident(struct ne
 	if (!addrs)
 		return 0;
 
-	net_get_random_once(&ip6_proxy_idents_hashrnd,
-			    sizeof(ip6_proxy_idents_hashrnd));
-
-	id = __ipv6_select_ident(net, ip6_proxy_idents_hashrnd,
-				 &addrs[1], &addrs[0]);
+	id = __ipv6_select_ident(net, &addrs[1], &addrs[0]);
 	return htonl(id);
 }
 EXPORT_SYMBOL_GPL(ipv6_proxy_select_ident);
@@ -66,12 +71,9 @@ __be32 ipv6_select_ident(struct net *net
 			 const struct in6_addr *daddr,
 			 const struct in6_addr *saddr)
 {
-	static u32 ip6_idents_hashrnd __read_mostly;
 	u32 id;
 
-	net_get_random_once(&ip6_idents_hashrnd, sizeof(ip6_idents_hashrnd));
-
-	id = __ipv6_select_ident(net, ip6_idents_hashrnd, daddr, saddr);
+	id = __ipv6_select_ident(net, daddr, saddr);
 	return htonl(id);
 }
 EXPORT_SYMBOL(ipv6_select_ident);

[PATCH 4.14 02/69] ipv6: Consider sk_bound_dev_if when binding a raw socket to an address

[Greg Kroah-Hartman]

From: Mike Manning <mmanning@vyatta.att-mail.com>

[ Upstream commit 72f7cfab6f93a8ea825fab8ccfb016d064269f7f ]

IPv6 does not consider if the socket is bound to a device when binding
to an address. The result is that a socket can be bound to eth0 and
then bound to the address of eth1. If the device is a VRF, the result
is that a socket can only be bound to an address in the default VRF.

Resolve by considering the device if sk_bound_dev_if is set.

Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/raw.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -288,7 +288,9 @@ static int rawv6_bind(struct sock *sk, s
 			/* Binding to link-local address requires an interface */
 			if (!sk->sk_bound_dev_if)
 				goto out_unlock;
+		}
 
+		if (sk->sk_bound_dev_if) {
 			err = -ENODEV;
 			dev = dev_get_by_index_rcu(sock_net(sk),
 						   sk->sk_bound_dev_if);

[PATCH 4.14 03/69] llc: fix skb leak in llc_build_and_send_ui_pkt()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 8fb44d60d4142cd2a440620cd291d346e23c131e ]

If llc_mac_hdr_init() returns an error, we must drop the skb
since no llc_build_and_send_ui_pkt() caller will take care of this.

BUG: memory leak
unreferenced object 0xffff8881202b6800 (size 2048):
  comm "syz-executor907", pid 7074, jiffies 4294943781 (age 8.590s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    1a 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00  ...@............
  backtrace:
    [<00000000e25b5abe>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
    [<00000000e25b5abe>] slab_post_alloc_hook mm/slab.h:439 [inline]
    [<00000000e25b5abe>] slab_alloc mm/slab.c:3326 [inline]
    [<00000000e25b5abe>] __do_kmalloc mm/slab.c:3658 [inline]
    [<00000000e25b5abe>] __kmalloc+0x161/0x2c0 mm/slab.c:3669
    [<00000000a1ae188a>] kmalloc include/linux/slab.h:552 [inline]
    [<00000000a1ae188a>] sk_prot_alloc+0xd6/0x170 net/core/sock.c:1608
    [<00000000ded25bbe>] sk_alloc+0x35/0x2f0 net/core/sock.c:1662
    [<000000002ecae075>] llc_sk_alloc+0x35/0x170 net/llc/llc_conn.c:950
    [<00000000551f7c47>] llc_ui_create+0x7b/0x140 net/llc/af_llc.c:173
    [<0000000029027f0e>] __sock_create+0x164/0x250 net/socket.c:1430
    [<000000008bdec225>] sock_create net/socket.c:1481 [inline]
    [<000000008bdec225>] __sys_socket+0x69/0x110 net/socket.c:1523
    [<00000000b6439228>] __do_sys_socket net/socket.c:1532 [inline]
    [<00000000b6439228>] __se_sys_socket net/socket.c:1530 [inline]
    [<00000000b6439228>] __x64_sys_socket+0x1e/0x30 net/socket.c:1530
    [<00000000cec820c1>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
    [<000000000c32554f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

BUG: memory leak
unreferenced object 0xffff88811d750d00 (size 224):
  comm "syz-executor907", pid 7074, jiffies 4294943781 (age 8.600s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 f0 0c 24 81 88 ff ff 00 68 2b 20 81 88 ff ff  ...$.....h+ ....
  backtrace:
    [<0000000053026172>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
    [<0000000053026172>] slab_post_alloc_hook mm/slab.h:439 [inline]
    [<0000000053026172>] slab_alloc_node mm/slab.c:3269 [inline]
    [<0000000053026172>] kmem_cache_alloc_node+0x153/0x2a0 mm/slab.c:3579
    [<00000000fa8f3c30>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:198
    [<00000000d96fdafb>] alloc_skb include/linux/skbuff.h:1058 [inline]
    [<00000000d96fdafb>] alloc_skb_with_frags+0x5f/0x250 net/core/skbuff.c:5327
    [<000000000a34a2e7>] sock_alloc_send_pskb+0x269/0x2a0 net/core/sock.c:2225
    [<00000000ee39999b>] sock_alloc_send_skb+0x32/0x40 net/core/sock.c:2242
    [<00000000e034d810>] llc_ui_sendmsg+0x10a/0x540 net/llc/af_llc.c:933
    [<00000000c0bc8445>] sock_sendmsg_nosec net/socket.c:652 [inline]
    [<00000000c0bc8445>] sock_sendmsg+0x54/0x70 net/socket.c:671
    [<000000003b687167>] __sys_sendto+0x148/0x1f0 net/socket.c:1964
    [<00000000922d78d9>] __do_sys_sendto net/socket.c:1976 [inline]
    [<00000000922d78d9>] __se_sys_sendto net/socket.c:1972 [inline]
    [<00000000922d78d9>] __x64_sys_sendto+0x2a/0x30 net/socket.c:1972
    [<00000000cec820c1>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
    [<000000000c32554f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/llc/llc_output.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/llc/llc_output.c
+++ b/net/llc/llc_output.c
@@ -72,6 +72,8 @@ int llc_build_and_send_ui_pkt(struct llc
 	rc = llc_mac_hdr_init(skb, skb->dev->dev_addr, dmac);
 	if (likely(!rc))
 		rc = dev_queue_xmit(skb);
+	else
+		kfree_skb(skb);
 	return rc;
 }
 

[PATCH 4.14 04/69] net: fec: fix the clk mismatch in failed_reset path

[Greg Kroah-Hartman]

From: Andy Duan <fugang.duan@nxp.com>

[ Upstream commit ce8d24f9a5965a58c588f9342689702a1024433c ]

Fix the clk mismatch in the error path "failed_reset" because
below error path will disable clk_ahb and clk_ipg directly, it
should use pm_runtime_put_noidle() instead of pm_runtime_put()
to avoid to call runtime resume callback.

Reported-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Tested-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/fec_main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3539,7 +3539,7 @@ failed_init:
 	if (fep->reg_phy)
 		regulator_disable(fep->reg_phy);
 failed_reset:
-	pm_runtime_put(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 failed_regulator:
 	clk_disable_unprepare(fep->clk_ahb);

[PATCH 4.14 05/69] net-gro: fix use-after-free read in napi_gro_frags()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit a4270d6795b0580287453ea55974d948393e66ef ]

If a network driver provides to napi_gro_frags() an
skb with a page fragment of exactly 14 bytes, the call
to gro_pull_from_frag0() will 'consume' the fragment
by calling skb_frag_unref(skb, 0), and the page might
be freed and reused.

Reading eth->h_proto at the end of napi_frags_skb() might
read mangled data, or crash under specific debugging features.

BUG: KASAN: use-after-free in napi_frags_skb net/core/dev.c:5833 [inline]
BUG: KASAN: use-after-free in napi_gro_frags+0xc6f/0xd10 net/core/dev.c:5841
Read of size 2 at addr ffff88809366840c by task syz-executor599/8957

CPU: 1 PID: 8957 Comm: syz-executor599 Not tainted 5.2.0-rc1+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188
 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 kasan_report+0x12/0x20 mm/kasan/common.c:614
 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:142
 napi_frags_skb net/core/dev.c:5833 [inline]
 napi_gro_frags+0xc6f/0xd10 net/core/dev.c:5841
 tun_get_user+0x2f3c/0x3ff0 drivers/net/tun.c:1991
 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2037
 call_write_iter include/linux/fs.h:1872 [inline]
 do_iter_readv_writev+0x5f8/0x8f0 fs/read_write.c:693
 do_iter_write fs/read_write.c:970 [inline]
 do_iter_write+0x184/0x610 fs/read_write.c:951
 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1015
 do_writev+0x15b/0x330 fs/read_write.c:1058

Fixes: a50e233c50db ("net-gro: restore frag0 optimization")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/dev.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5067,7 +5067,6 @@ static struct sk_buff *napi_frags_skb(st
 	skb_reset_mac_header(skb);
 	skb_gro_reset_offset(skb);
 
-	eth = skb_gro_header_fast(skb, 0);
 	if (unlikely(skb_gro_header_hard(skb, hlen))) {
 		eth = skb_gro_header_slow(skb, hlen, 0);
 		if (unlikely(!eth)) {
@@ -5077,6 +5076,7 @@ static struct sk_buff *napi_frags_skb(st
 			return NULL;
 		}
 	} else {
+		eth = (const struct ethhdr *)skb->data;
 		gro_pull_from_frag0(skb, hlen);
 		NAPI_GRO_CB(skb)->frag0 += hlen;
 		NAPI_GRO_CB(skb)->frag0_len -= hlen;

[PATCH 4.14 06/69] net: stmmac: fix reset gpio free missing

[Greg Kroah-Hartman]

From: Jisheng Zhang <Jisheng.Zhang@synaptics.com>

[ Upstream commit 49ce881c0d4c4a7a35358d9dccd5f26d0e56fc61 ]

Commit 984203ceff27 ("net: stmmac: mdio: remove reset gpio free")
removed the reset gpio free, when the driver is unbinded or rmmod,
we miss the gpio free.

This patch uses managed API to request the reset gpio, so that the
gpio could be freed properly.

Fixes: 984203ceff27 ("net: stmmac: mdio: remove reset gpio free")
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -157,7 +157,8 @@ int stmmac_mdio_reset(struct mii_bus *bu
 			of_property_read_u32_array(np,
 				"snps,reset-delays-us", data->delays, 3);
 
-			if (gpio_request(data->reset_gpio, "mdio-reset"))
+			if (devm_gpio_request(priv->device, data->reset_gpio,
+					      "mdio-reset"))
 				return 0;
 		}
 

[PATCH 4.14 07/69] usbnet: fix kernel crash after disconnect

[Greg Kroah-Hartman]

From: Kloetzke Jan <Jan.Kloetzke@preh.de>

[ Upstream commit ad70411a978d1e6e97b1e341a7bde9a79af0c93d ]

When disconnecting cdc_ncm the kernel sporadically crashes shortly
after the disconnect:

  [   57.868812] Unable to handle kernel NULL pointer dereference at virtual address 00000000
  ...
  [   58.006653] PC is at 0x0
  [   58.009202] LR is at call_timer_fn+0xec/0x1b4
  [   58.013567] pc : [<0000000000000000>] lr : [<ffffff80080f5130>] pstate: 00000145
  [   58.020976] sp : ffffff8008003da0
  [   58.024295] x29: ffffff8008003da0 x28: 0000000000000001
  [   58.029618] x27: 000000000000000a x26: 0000000000000100
  [   58.034941] x25: 0000000000000000 x24: ffffff8008003e68
  [   58.040263] x23: 0000000000000000 x22: 0000000000000000
  [   58.045587] x21: 0000000000000000 x20: ffffffc68fac1808
  [   58.050910] x19: 0000000000000100 x18: 0000000000000000
  [   58.056232] x17: 0000007f885aff8c x16: 0000007f883a9f10
  [   58.061556] x15: 0000000000000001 x14: 000000000000006e
  [   58.066878] x13: 0000000000000000 x12: 00000000000000ba
  [   58.072201] x11: ffffffc69ff1db30 x10: 0000000000000020
  [   58.077524] x9 : 8000100008001000 x8 : 0000000000000001
  [   58.082847] x7 : 0000000000000800 x6 : ffffff8008003e70
  [   58.088169] x5 : ffffffc69ff17a28 x4 : 00000000ffff138b
  [   58.093492] x3 : 0000000000000000 x2 : 0000000000000000
  [   58.098814] x1 : 0000000000000000 x0 : 0000000000000000
  ...
  [   58.205800] [<          (null)>]           (null)
  [   58.210521] [<ffffff80080f5298>] expire_timers+0xa0/0x14c
  [   58.215937] [<ffffff80080f542c>] run_timer_softirq+0xe8/0x128
  [   58.221702] [<ffffff8008081120>] __do_softirq+0x298/0x348
  [   58.227118] [<ffffff80080a6304>] irq_exit+0x74/0xbc
  [   58.232009] [<ffffff80080e17dc>] __handle_domain_irq+0x78/0xac
  [   58.237857] [<ffffff8008080cf4>] gic_handle_irq+0x80/0xac
  ...

The crash happens roughly 125..130ms after the disconnect. This
correlates with the 'delay' timer that is started on certain USB tx/rx
errors in the URB completion handler.

The problem is a race of usbnet_stop() with usbnet_start_xmit(). In
usbnet_stop() we call usbnet_terminate_urbs() to cancel all URBs in
flight. This only makes sense if no new URBs are submitted
concurrently, though. But the usbnet_start_xmit() can run at the same
time on another CPU which almost unconditionally submits an URB. The
error callback of the new URB will then schedule the timer after it was
already stopped.

The fix adds a check if the tx queue is stopped after the tx list lock
has been taken. This should reliably prevent the submission of new URBs
while usbnet_terminate_urbs() does its job. The same thing is done on
the rx side even though it might be safe due to other flags that are
checked there.

Signed-off-by: Jan Klötzke <Jan.Kloetzke@preh.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/usbnet.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -508,6 +508,7 @@ static int rx_submit (struct usbnet *dev
 
 	if (netif_running (dev->net) &&
 	    netif_device_present (dev->net) &&
+	    test_bit(EVENT_DEV_OPEN, &dev->flags) &&
 	    !test_bit (EVENT_RX_HALT, &dev->flags) &&
 	    !test_bit (EVENT_DEV_ASLEEP, &dev->flags)) {
 		switch (retval = usb_submit_urb (urb, GFP_ATOMIC)) {
@@ -1433,6 +1434,11 @@ netdev_tx_t usbnet_start_xmit (struct sk
 		spin_unlock_irqrestore(&dev->txq.lock, flags);
 		goto drop;
 	}
+	if (netif_queue_stopped(net)) {
+		usb_autopm_put_interface_async(dev->intf);
+		spin_unlock_irqrestore(&dev->txq.lock, flags);
+		goto drop;
+	}
 
 #ifdef CONFIG_PM
 	/* if this triggers the device is still a sleep */

[PATCH 4.14 08/69] tipc: Avoid copying bytes beyond the supplied data

[Greg Kroah-Hartman]

From: Chris Packham <chris.packham@alliedtelesis.co.nz>

TLV_SET is called with a data pointer and a len parameter that tells us
how many bytes are pointed to by data. When invoking memcpy() we need
to careful to only copy len bytes.

Previously we would copy TLV_LENGTH(len) bytes which would copy an extra
4 bytes past the end of the data pointer which newer GCC versions
complain about.

 In file included from test.c:17:
 In function 'TLV_SET',
     inlined from 'test' at test.c:186:5:
 /usr/include/linux/tipc_config.h:317:3:
 warning: 'memcpy' forming offset [33, 36] is out of the bounds [0, 32]
 of object 'bearer_name' with type 'char[32]' [-Warray-bounds]
     memcpy(TLV_DATA(tlv_ptr), data, tlv_len);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 test.c: In function 'test':
 test.c::161:10: note:
 'bearer_name' declared here
     char bearer_name[TIPC_MAX_BEARER_NAME];
          ^~~~~~~~~~~

We still want to ensure any padding bytes at the end are initialised, do
this with a explicit memset() rather than copy bytes past the end of
data. Apply the same logic to TCM_SET.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/uapi/linux/tipc_config.h |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/include/uapi/linux/tipc_config.h
+++ b/include/uapi/linux/tipc_config.h
@@ -302,8 +302,10 @@ static inline int TLV_SET(void *tlv, __u
 	tlv_ptr = (struct tlv_desc *)tlv;
 	tlv_ptr->tlv_type = htons(type);
 	tlv_ptr->tlv_len  = htons(tlv_len);
-	if (len && data)
-		memcpy(TLV_DATA(tlv_ptr), data, tlv_len);
+	if (len && data) {
+		memcpy(TLV_DATA(tlv_ptr), data, len);
+		memset(TLV_DATA(tlv_ptr) + len, 0, TLV_SPACE(len) - tlv_len);
+	}
 	return TLV_SPACE(len);
 }
 
@@ -400,8 +402,10 @@ static inline int TCM_SET(void *msg, __u
 	tcm_hdr->tcm_len   = htonl(msg_len);
 	tcm_hdr->tcm_type  = htons(cmd);
 	tcm_hdr->tcm_flags = htons(flags);
-	if (data_len && data)
+	if (data_len && data) {
 		memcpy(TCM_DATA(msg), data, data_len);
+		memset(TCM_DATA(msg) + data_len, 0, TCM_SPACE(data_len) - msg_len);
+	}
 	return TCM_SPACE(data_len);
 }
 

[PATCH 4.14 09/69] net/mlx5: Allocate root ns memory using kzalloc to match kfree

[Greg Kroah-Hartman]

From: Parav Pandit <parav@mellanox.com>

[ Upstream commit 25fa506b70cadb580c1e9cbd836d6417276d4bcd ]

root ns is yet another fs core node which is freed using kfree() by
tree_put_node().
Rest of the other fs core objects are also allocated using kmalloc
variants.

However, root ns memory is allocated using kvzalloc().
Hence allocate root ns memory using kzalloc().

Fixes: 2530236303d9e ("net/mlx5_core: Flow steering tree initialization")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
@@ -1960,7 +1960,7 @@ static struct mlx5_flow_root_namespace *
 	struct mlx5_flow_namespace *ns;
 
 	/* Create the root namespace */
-	root_ns = kvzalloc(sizeof(*root_ns), GFP_KERNEL);
+	root_ns = kzalloc(sizeof(*root_ns), GFP_KERNEL);
 	if (!root_ns)
 		return NULL;
 

[PATCH 4.14 10/69] bnxt_en: Fix aggregation buffer leak under OOM condition.

[Greg Kroah-Hartman]

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit 296d5b54163964b7ae536b8b57dfbd21d4e868e1 ]

For every RX packet, the driver replenishes all buffers used for that
packet and puts them back into the RX ring and RX aggregation ring.
In one code path where the RX packet has one RX buffer and one or more
aggregation buffers, we missed recycling the aggregation buffer(s) if
we are unable to allocate a new SKB buffer.  This leads to the
aggregation ring slowly running out of buffers over time.  Fix it
by properly recycling the aggregation buffers.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Reported-by: Rakesh Hemnani <rhemnani@fb.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -1583,6 +1583,8 @@ static int bnxt_rx_pkt(struct bnxt *bp,
 		skb = bnxt_copy_skb(bnapi, data_ptr, len, dma_addr);
 		bnxt_reuse_rx_data(rxr, cons, data);
 		if (!skb) {
+			if (agg_bufs)
+				bnxt_reuse_rx_agg_bufs(bnapi, cp_cons, agg_bufs);
 			rc = -ENOMEM;
 			goto next_rx;
 		}

[PATCH 4.14 11/69] ipv4/igmp: fix another memory leak in igmpv3_del_delrec()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 3580d04aa674383c42de7b635d28e52a1e5bc72c ]

syzbot reported memory leaks [1] that I have back tracked to
a missing cleanup from igmpv3_del_delrec() when
(im->sfmode != MCAST_INCLUDE)

Add ip_sf_list_clear_all() and kfree_pmc() helpers to explicitely
handle the cleanups before freeing.

[1]

BUG: memory leak
unreferenced object 0xffff888123e32b00 (size 64):
  comm "softirq", pid 0, jiffies 4294942968 (age 8.010s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 e0 00 00 01 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000006105011b>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
    [<000000006105011b>] slab_post_alloc_hook mm/slab.h:439 [inline]
    [<000000006105011b>] slab_alloc mm/slab.c:3326 [inline]
    [<000000006105011b>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
    [<000000004bba8073>] kmalloc include/linux/slab.h:547 [inline]
    [<000000004bba8073>] kzalloc include/linux/slab.h:742 [inline]
    [<000000004bba8073>] ip_mc_add1_src net/ipv4/igmp.c:1961 [inline]
    [<000000004bba8073>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2085
    [<00000000a46a65a0>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2475
    [<000000005956ca89>] do_ip_setsockopt.isra.0+0x1795/0x1930 net/ipv4/ip_sockglue.c:957
    [<00000000848e2d2f>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1246
    [<00000000b9db185c>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616
    [<000000003028e438>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3130
    [<0000000015b65589>] __sys_setsockopt+0x98/0x120 net/socket.c:2078
    [<00000000ac198ef0>] __do_sys_setsockopt net/socket.c:2089 [inline]
    [<00000000ac198ef0>] __se_sys_setsockopt net/socket.c:2086 [inline]
    [<00000000ac198ef0>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086
    [<000000000a770437>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
    [<00000000d3adb93b>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 9c8bb163ae78 ("igmp, mld: Fix memory leak in igmpv3/mld_del_delrec()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/igmp.c |   47 ++++++++++++++++++++++++++++++-----------------
 1 file changed, 30 insertions(+), 17 deletions(-)

--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -635,6 +635,24 @@ static void igmpv3_clear_zeros(struct ip
 	}
 }
 
+static void ip_sf_list_clear_all(struct ip_sf_list *psf)
+{
+	struct ip_sf_list *next;
+
+	while (psf) {
+		next = psf->sf_next;
+		kfree(psf);
+		psf = next;
+	}
+}
+
+static void kfree_pmc(struct ip_mc_list *pmc)
+{
+	ip_sf_list_clear_all(pmc->sources);
+	ip_sf_list_clear_all(pmc->tomb);
+	kfree(pmc);
+}
+
 static void igmpv3_send_cr(struct in_device *in_dev)
 {
 	struct ip_mc_list *pmc, *pmc_prev, *pmc_next;
@@ -671,7 +689,7 @@ static void igmpv3_send_cr(struct in_dev
 			else
 				in_dev->mc_tomb = pmc_next;
 			in_dev_put(pmc->interface);
-			kfree(pmc);
+			kfree_pmc(pmc);
 		} else
 			pmc_prev = pmc;
 	}
@@ -1203,12 +1221,16 @@ static void igmpv3_del_delrec(struct in_
 		im->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv;
 		if (im->sfmode == MCAST_INCLUDE) {
 			im->tomb = pmc->tomb;
+			pmc->tomb = NULL;
+
 			im->sources = pmc->sources;
+			pmc->sources = NULL;
+
 			for (psf = im->sources; psf; psf = psf->sf_next)
 				psf->sf_crcount = im->crcount;
 		}
 		in_dev_put(pmc->interface);
-		kfree(pmc);
+		kfree_pmc(pmc);
 	}
 	spin_unlock_bh(&im->lock);
 }
@@ -1229,21 +1251,18 @@ static void igmpv3_clear_delrec(struct i
 		nextpmc = pmc->next;
 		ip_mc_clear_src(pmc);
 		in_dev_put(pmc->interface);
-		kfree(pmc);
+		kfree_pmc(pmc);
 	}
 	/* clear dead sources, too */
 	rcu_read_lock();
 	for_each_pmc_rcu(in_dev, pmc) {
-		struct ip_sf_list *psf, *psf_next;
+		struct ip_sf_list *psf;
 
 		spin_lock_bh(&pmc->lock);
 		psf = pmc->tomb;
 		pmc->tomb = NULL;
 		spin_unlock_bh(&pmc->lock);
-		for (; psf; psf = psf_next) {
-			psf_next = psf->sf_next;
-			kfree(psf);
-		}
+		ip_sf_list_clear_all(psf);
 	}
 	rcu_read_unlock();
 }
@@ -2107,7 +2126,7 @@ static int ip_mc_add_src(struct in_devic
 
 static void ip_mc_clear_src(struct ip_mc_list *pmc)
 {
-	struct ip_sf_list *psf, *nextpsf, *tomb, *sources;
+	struct ip_sf_list *tomb, *sources;
 
 	spin_lock_bh(&pmc->lock);
 	tomb = pmc->tomb;
@@ -2119,14 +2138,8 @@ static void ip_mc_clear_src(struct ip_mc
 	pmc->sfcount[MCAST_EXCLUDE] = 1;
 	spin_unlock_bh(&pmc->lock);
 
-	for (psf = tomb; psf; psf = nextpsf) {
-		nextpsf = psf->sf_next;
-		kfree(psf);
-	}
-	for (psf = sources; psf; psf = nextpsf) {
-		nextpsf = psf->sf_next;
-		kfree(psf);
-	}
+	ip_sf_list_clear_all(tomb);
+	ip_sf_list_clear_all(sources);
 }
 
 /* Join a multicast group

[PATCH 4.14 12/69] ipv4/igmp: fix build error if !CONFIG_IP_MULTICAST

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 903869bd10e6719b9df6718e785be7ec725df59f ]

ip_sf_list_clear_all() needs to be defined even if !CONFIG_IP_MULTICAST

Fixes: 3580d04aa674 ("ipv4/igmp: fix another memory leak in igmpv3_del_delrec()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/igmp.c |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -190,6 +190,17 @@ static void ip_ma_put(struct ip_mc_list
 	     pmc != NULL;					\
 	     pmc = rtnl_dereference(pmc->next_rcu))
 
+static void ip_sf_list_clear_all(struct ip_sf_list *psf)
+{
+	struct ip_sf_list *next;
+
+	while (psf) {
+		next = psf->sf_next;
+		kfree(psf);
+		psf = next;
+	}
+}
+
 #ifdef CONFIG_IP_MULTICAST
 
 /*
@@ -635,17 +646,6 @@ static void igmpv3_clear_zeros(struct ip
 	}
 }
 
-static void ip_sf_list_clear_all(struct ip_sf_list *psf)
-{
-	struct ip_sf_list *next;
-
-	while (psf) {
-		next = psf->sf_next;
-		kfree(psf);
-		psf = next;
-	}
-}
-
 static void kfree_pmc(struct ip_mc_list *pmc)
 {
 	ip_sf_list_clear_all(pmc->sources);

[PATCH 4.14 13/69] net: dsa: mv88e6xxx: fix handling of upper half of STATS_TYPE_PORT

[Greg Kroah-Hartman]

From: Rasmus Villemoes <rasmus.villemoes@prevas.dk>

[ Upstream commit 84b3fd1fc9592d431e23b077e692fa4e3fd0f086 ]

Currently, the upper half of a 4-byte STATS_TYPE_PORT statistic ends
up in bits 47:32 of the return value, instead of bits 31:16 as they
should.

Fixes: 6e46e2d821bb ("net: dsa: mv88e6xxx: Fix u64 statistics")
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -624,7 +624,7 @@ static uint64_t _mv88e6xxx_get_ethtool_s
 			err = mv88e6xxx_port_read(chip, port, s->reg + 1, &reg);
 			if (err)
 				return UINT64_MAX;
-			high = reg;
+			low |= ((u32)reg) << 16;
 		}
 		break;
 	case STATS_TYPE_BANK1:

[PATCH 4.14 14/69] net: mvneta: Fix err code path of probe

[Greg Kroah-Hartman]

From: Jisheng Zhang <Jisheng.Zhang@synaptics.com>

[ Upstream commit d484e06e25ebb937d841dac02ac1fe76ec7d4ddd ]

Fix below issues in err code path of probe:
1. we don't need to unregister_netdev() because the netdev isn't
registered.
2. when register_netdev() fails, we also need to destroy bm pool for
HWBM case.

Fixes: dc35a10f68d3 ("net: mvneta: bm: add support for hardware buffer management")
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/marvell/mvneta.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -4350,7 +4350,7 @@ static int mvneta_probe(struct platform_
 	err = register_netdev(dev);
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to register\n");
-		goto err_free_stats;
+		goto err_netdev;
 	}
 
 	netdev_info(dev, "Using %s mac address %pM\n", mac_from,
@@ -4369,13 +4369,11 @@ static int mvneta_probe(struct platform_
 	return 0;
 
 err_netdev:
-	unregister_netdev(dev);
 	if (pp->bm_priv) {
 		mvneta_bm_pool_destroy(pp->bm_priv, pp->pool_long, 1 << pp->id);
 		mvneta_bm_pool_destroy(pp->bm_priv, pp->pool_short,
 				       1 << pp->id);
 	}
-err_free_stats:
 	free_percpu(pp->stats);
 err_free_ports:
 	free_percpu(pp->ports);

[PATCH 4.14 15/69] net: mvpp2: fix bad MVPP2_TXQ_SCHED_TOKEN_CNTR_REG queue value

[Greg Kroah-Hartman]

From: Antoine Tenart <antoine.tenart@bootlin.com>

[ Upstream commit 21808437214637952b61beaba6034d97880fbeb3 ]

MVPP2_TXQ_SCHED_TOKEN_CNTR_REG() expects the logical queue id but
the current code is passing the global tx queue offset, so it ends
up writing to unknown registers (between 0x8280 and 0x82fc, which
seemed to be unused by the hardware). This fixes the issue by using
the logical queue id instead.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/marvell/mvpp2.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

--- a/drivers/net/ethernet/marvell/mvpp2.c
+++ b/drivers/net/ethernet/marvell/mvpp2.c
@@ -4780,7 +4780,7 @@ static inline void mvpp2_xlg_max_rx_size
 /* Set defaults to the MVPP2 port */
 static void mvpp2_defaults_set(struct mvpp2_port *port)
 {
-	int tx_port_num, val, queue, ptxq, lrxq;
+	int tx_port_num, val, queue, lrxq;
 
 	if (port->priv->hw_version == MVPP21) {
 		/* Configure port to loopback if needed */
@@ -4802,11 +4802,9 @@ static void mvpp2_defaults_set(struct mv
 	mvpp2_write(port->priv, MVPP2_TXP_SCHED_CMD_1_REG, 0);
 
 	/* Close bandwidth for all queues */
-	for (queue = 0; queue < MVPP2_MAX_TXQ; queue++) {
-		ptxq = mvpp2_txq_phys(port->id, queue);
+	for (queue = 0; queue < MVPP2_MAX_TXQ; queue++)
 		mvpp2_write(port->priv,
-			    MVPP2_TXQ_SCHED_TOKEN_CNTR_REG(ptxq), 0);
-	}
+			    MVPP2_TXQ_SCHED_TOKEN_CNTR_REG(queue), 0);
 
 	/* Set refill period to 1 usec, refill tokens
 	 * and bucket size to maximum
@@ -5645,7 +5643,7 @@ static void mvpp2_txq_deinit(struct mvpp
 	txq->descs_dma         = 0;
 
 	/* Set minimum bandwidth for disabled TXQs */
-	mvpp2_write(port->priv, MVPP2_TXQ_SCHED_TOKEN_CNTR_REG(txq->id), 0);
+	mvpp2_write(port->priv, MVPP2_TXQ_SCHED_TOKEN_CNTR_REG(txq->log_id), 0);
 
 	/* Set Tx descriptors queue starting address and size */
 	cpu = get_cpu();

[PATCH 4.14 16/69] net: phy: marvell10g: report if the PHY fails to boot firmware

[Greg Kroah-Hartman]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 3d3ced2ec5d71b99d72ae6910fbdf890bc2eccf0 ]

Some boards do not have the PHY firmware programmed in the 3310's flash,
which leads to the PHY not working as expected.  Warn the user when the
PHY fails to boot the firmware and refuse to initialise.

Fixes: 20b2af32ff3f ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/marvell10g.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -19,6 +19,9 @@
 #include <linux/marvell_phy.h>
 
 enum {
+	MV_PMA_BOOT		= 0xc050,
+	MV_PMA_BOOT_FATAL	= BIT(0),
+
 	MV_PCS_BASE_T		= 0x0000,
 	MV_PCS_BASE_R		= 0x1000,
 	MV_PCS_1000BASEX	= 0x2000,
@@ -59,11 +62,22 @@ static int mv3310_modify(struct phy_devi
 static int mv3310_probe(struct phy_device *phydev)
 {
 	u32 mmd_mask = MDIO_DEVS_PMAPMD | MDIO_DEVS_AN;
+	int ret;
 
 	if (!phydev->is_c45 ||
 	    (phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask)
 		return -ENODEV;
 
+	ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_BOOT);
+	if (ret < 0)
+		return ret;
+
+	if (ret & MV_PMA_BOOT_FATAL) {
+		dev_warn(&phydev->mdio.dev,
+			 "PHY failed to boot firmware, status=%04x\n", ret);
+		return -ENODEV;
+	}
+
 	return 0;
 }
 

[PATCH 4.14 17/69] crypto: vmx - ghash: do nosimd fallback manually

[Greg Kroah-Hartman]

From: Daniel Axtens <dja@axtens.net>

commit 357d065a44cdd77ed5ff35155a989f2a763e96ef upstream.

VMX ghash was using a fallback that did not support interleaving simd
and nosimd operations, leading to failures in the extended test suite.

If I understood correctly, Eric's suggestion was to use the same
data format that the generic code uses, allowing us to call into it
with the same contexts. I wasn't able to get that to work - I think
there's a very different key structure and data layout being used.

So instead steal the arm64 approach and perform the fallback
operations directly if required.

Fixes: cc333cd68dfa ("crypto: vmx - Adding GHASH routines for VMX module")
Cc: stable@vger.kernel.org # v4.1+
Reported-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/vmx/ghash.c |  213 ++++++++++++++++++---------------------------
 1 file changed, 87 insertions(+), 126 deletions(-)

--- a/drivers/crypto/vmx/ghash.c
+++ b/drivers/crypto/vmx/ghash.c
@@ -1,22 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * GHASH routines supporting VMX instructions on the Power 8
  *
- * Copyright (C) 2015 International Business Machines Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 only.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * Copyright (C) 2015, 2019 International Business Machines Inc.
  *
  * Author: Marcelo Henrique Cerri <mhcerri@br.ibm.com>
+ *
+ * Extended by Daniel Axtens <dja@axtens.net> to replace the fallback
+ * mechanism. The new approach is based on arm64 code, which is:
+ *   Copyright (C) 2014 - 2018 Linaro Ltd. <ard.biesheuvel@linaro.org>
  */
 
 #include <linux/types.h>
@@ -39,71 +31,25 @@ void gcm_ghash_p8(u64 Xi[2], const u128
 		  const u8 *in, size_t len);
 
 struct p8_ghash_ctx {
+	/* key used by vector asm */
 	u128 htable[16];
-	struct crypto_shash *fallback;
+	/* key used by software fallback */
+	be128 key;
 };
 
 struct p8_ghash_desc_ctx {
 	u64 shash[2];
 	u8 buffer[GHASH_DIGEST_SIZE];
 	int bytes;
-	struct shash_desc fallback_desc;
 };
 
-static int p8_ghash_init_tfm(struct crypto_tfm *tfm)
-{
-	const char *alg = "ghash-generic";
-	struct crypto_shash *fallback;
-	struct crypto_shash *shash_tfm = __crypto_shash_cast(tfm);
-	struct p8_ghash_ctx *ctx = crypto_tfm_ctx(tfm);
-
-	fallback = crypto_alloc_shash(alg, 0, CRYPTO_ALG_NEED_FALLBACK);
-	if (IS_ERR(fallback)) {
-		printk(KERN_ERR
-		       "Failed to allocate transformation for '%s': %ld\n",
-		       alg, PTR_ERR(fallback));
-		return PTR_ERR(fallback);
-	}
-
-	crypto_shash_set_flags(fallback,
-			       crypto_shash_get_flags((struct crypto_shash
-						       *) tfm));
-
-	/* Check if the descsize defined in the algorithm is still enough. */
-	if (shash_tfm->descsize < sizeof(struct p8_ghash_desc_ctx)
-	    + crypto_shash_descsize(fallback)) {
-		printk(KERN_ERR
-		       "Desc size of the fallback implementation (%s) does not match the expected value: %lu vs %u\n",
-		       alg,
-		       shash_tfm->descsize - sizeof(struct p8_ghash_desc_ctx),
-		       crypto_shash_descsize(fallback));
-		return -EINVAL;
-	}
-	ctx->fallback = fallback;
-
-	return 0;
-}
-
-static void p8_ghash_exit_tfm(struct crypto_tfm *tfm)
-{
-	struct p8_ghash_ctx *ctx = crypto_tfm_ctx(tfm);
-
-	if (ctx->fallback) {
-		crypto_free_shash(ctx->fallback);
-		ctx->fallback = NULL;
-	}
-}
-
 static int p8_ghash_init(struct shash_desc *desc)
 {
-	struct p8_ghash_ctx *ctx = crypto_tfm_ctx(crypto_shash_tfm(desc->tfm));
 	struct p8_ghash_desc_ctx *dctx = shash_desc_ctx(desc);
 
 	dctx->bytes = 0;
 	memset(dctx->shash, 0, GHASH_DIGEST_SIZE);
-	dctx->fallback_desc.tfm = ctx->fallback;
-	dctx->fallback_desc.flags = desc->flags;
-	return crypto_shash_init(&dctx->fallback_desc);
+	return 0;
 }
 
 static int p8_ghash_setkey(struct crypto_shash *tfm, const u8 *key,
@@ -121,7 +67,51 @@ static int p8_ghash_setkey(struct crypto
 	disable_kernel_vsx();
 	pagefault_enable();
 	preempt_enable();
-	return crypto_shash_setkey(ctx->fallback, key, keylen);
+
+	memcpy(&ctx->key, key, GHASH_BLOCK_SIZE);
+
+	return 0;
+}
+
+static inline void __ghash_block(struct p8_ghash_ctx *ctx,
+				 struct p8_ghash_desc_ctx *dctx)
+{
+	if (!IN_INTERRUPT) {
+		preempt_disable();
+		pagefault_disable();
+		enable_kernel_vsx();
+		gcm_ghash_p8(dctx->shash, ctx->htable,
+				dctx->buffer, GHASH_DIGEST_SIZE);
+		disable_kernel_vsx();
+		pagefault_enable();
+		preempt_enable();
+	} else {
+		crypto_xor((u8 *)dctx->shash, dctx->buffer, GHASH_BLOCK_SIZE);
+		gf128mul_lle((be128 *)dctx->shash, &ctx->key);
+	}
+}
+
+static inline void __ghash_blocks(struct p8_ghash_ctx *ctx,
+				  struct p8_ghash_desc_ctx *dctx,
+				  const u8 *src, unsigned int srclen)
+{
+	if (!IN_INTERRUPT) {
+		preempt_disable();
+		pagefault_disable();
+		enable_kernel_vsx();
+		gcm_ghash_p8(dctx->shash, ctx->htable,
+				src, srclen);
+		disable_kernel_vsx();
+		pagefault_enable();
+		preempt_enable();
+	} else {
+		while (srclen >= GHASH_BLOCK_SIZE) {
+			crypto_xor((u8 *)dctx->shash, src, GHASH_BLOCK_SIZE);
+			gf128mul_lle((be128 *)dctx->shash, &ctx->key);
+			srclen -= GHASH_BLOCK_SIZE;
+			src += GHASH_BLOCK_SIZE;
+		}
+	}
 }
 
 static int p8_ghash_update(struct shash_desc *desc,
@@ -131,49 +121,33 @@ static int p8_ghash_update(struct shash_
 	struct p8_ghash_ctx *ctx = crypto_tfm_ctx(crypto_shash_tfm(desc->tfm));
 	struct p8_ghash_desc_ctx *dctx = shash_desc_ctx(desc);
 
-	if (IN_INTERRUPT) {
-		return crypto_shash_update(&dctx->fallback_desc, src,
-					   srclen);
-	} else {
-		if (dctx->bytes) {
-			if (dctx->bytes + srclen < GHASH_DIGEST_SIZE) {
-				memcpy(dctx->buffer + dctx->bytes, src,
-				       srclen);
-				dctx->bytes += srclen;
-				return 0;
-			}
+	if (dctx->bytes) {
+		if (dctx->bytes + srclen < GHASH_DIGEST_SIZE) {
 			memcpy(dctx->buffer + dctx->bytes, src,
-			       GHASH_DIGEST_SIZE - dctx->bytes);
-			preempt_disable();
-			pagefault_disable();
-			enable_kernel_vsx();
-			gcm_ghash_p8(dctx->shash, ctx->htable,
-				     dctx->buffer, GHASH_DIGEST_SIZE);
-			disable_kernel_vsx();
-			pagefault_enable();
-			preempt_enable();
-			src += GHASH_DIGEST_SIZE - dctx->bytes;
-			srclen -= GHASH_DIGEST_SIZE - dctx->bytes;
-			dctx->bytes = 0;
+				srclen);
+			dctx->bytes += srclen;
+			return 0;
 		}
-		len = srclen & ~(GHASH_DIGEST_SIZE - 1);
-		if (len) {
-			preempt_disable();
-			pagefault_disable();
-			enable_kernel_vsx();
-			gcm_ghash_p8(dctx->shash, ctx->htable, src, len);
-			disable_kernel_vsx();
-			pagefault_enable();
-			preempt_enable();
-			src += len;
-			srclen -= len;
-		}
-		if (srclen) {
-			memcpy(dctx->buffer, src, srclen);
-			dctx->bytes = srclen;
-		}
-		return 0;
+		memcpy(dctx->buffer + dctx->bytes, src,
+			GHASH_DIGEST_SIZE - dctx->bytes);
+
+		__ghash_block(ctx, dctx);
+
+		src += GHASH_DIGEST_SIZE - dctx->bytes;
+		srclen -= GHASH_DIGEST_SIZE - dctx->bytes;
+		dctx->bytes = 0;
+	}
+	len = srclen & ~(GHASH_DIGEST_SIZE - 1);
+	if (len) {
+		__ghash_blocks(ctx, dctx, src, len);
+		src += len;
+		srclen -= len;
 	}
+	if (srclen) {
+		memcpy(dctx->buffer, src, srclen);
+		dctx->bytes = srclen;
+	}
+	return 0;
 }
 
 static int p8_ghash_final(struct shash_desc *desc, u8 *out)
@@ -182,25 +156,14 @@ static int p8_ghash_final(struct shash_d
 	struct p8_ghash_ctx *ctx = crypto_tfm_ctx(crypto_shash_tfm(desc->tfm));
 	struct p8_ghash_desc_ctx *dctx = shash_desc_ctx(desc);
 
-	if (IN_INTERRUPT) {
-		return crypto_shash_final(&dctx->fallback_desc, out);
-	} else {
-		if (dctx->bytes) {
-			for (i = dctx->bytes; i < GHASH_DIGEST_SIZE; i++)
-				dctx->buffer[i] = 0;
-			preempt_disable();
-			pagefault_disable();
-			enable_kernel_vsx();
-			gcm_ghash_p8(dctx->shash, ctx->htable,
-				     dctx->buffer, GHASH_DIGEST_SIZE);
-			disable_kernel_vsx();
-			pagefault_enable();
-			preempt_enable();
-			dctx->bytes = 0;
-		}
-		memcpy(out, dctx->shash, GHASH_DIGEST_SIZE);
-		return 0;
+	if (dctx->bytes) {
+		for (i = dctx->bytes; i < GHASH_DIGEST_SIZE; i++)
+			dctx->buffer[i] = 0;
+		__ghash_block(ctx, dctx);
+		dctx->bytes = 0;
 	}
+	memcpy(out, dctx->shash, GHASH_DIGEST_SIZE);
+	return 0;
 }
 
 struct shash_alg p8_ghash_alg = {
@@ -215,11 +178,9 @@ struct shash_alg p8_ghash_alg = {
 		 .cra_name = "ghash",
 		 .cra_driver_name = "p8_ghash",
 		 .cra_priority = 1000,
-		 .cra_flags = CRYPTO_ALG_TYPE_SHASH | CRYPTO_ALG_NEED_FALLBACK,
+		 .cra_flags = CRYPTO_ALG_TYPE_SHASH,
 		 .cra_blocksize = GHASH_BLOCK_SIZE,
 		 .cra_ctxsize = sizeof(struct p8_ghash_ctx),
 		 .cra_module = THIS_MODULE,
-		 .cra_init = p8_ghash_init_tfm,
-		 .cra_exit = p8_ghash_exit_tfm,
 	},
 };

[PATCH 4.14 18/69] xen/pciback: Dont disable PCI_COMMAND on PCI device reset.

[Greg Kroah-Hartman]

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit 7681f31ec9cdacab4fd10570be924f2cef6669ba upstream.

There is no need for this at all. Worst it means that if
the guest tries to write to BARs it could lead (on certain
platforms) to PCI SERR errors.

Please note that with af6fc858a35b90e89ea7a7ee58e66628c55c776b
"xen-pciback: limit guest control of command register"
a guest is still allowed to enable those control bits (safely), but
is not allowed to disable them and that therefore a well behaved
frontend which enables things before using them will still
function correctly.

This is done via an write to the configuration register 0x4 which
triggers on the backend side:
command_write
  \- pci_enable_device
     \- pci_enable_device_flags
        \- do_pci_enable_device
           \- pcibios_enable_device
              \-pci_enable_resourcess
                [which enables the PCI_COMMAND_MEMORY|PCI_COMMAND_IO]

However guests (and drivers) which don't do this could cause
problems, including the security issues which XSA-120 sought
to address.

Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/xen-pciback/pciback_ops.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -127,8 +127,6 @@ void xen_pcibk_reset_device(struct pci_d
 		if (pci_is_enabled(dev))
 			pci_disable_device(dev);
 
-		pci_write_config_word(dev, PCI_COMMAND, 0);
-
 		dev->is_busmaster = 0;
 	} else {
 		pci_read_config_word(dev, PCI_COMMAND, &cmd);

[PATCH 4.14 19/69] Revert "tipc: fix modprobe tipc failed after switch order of device registration"

[Greg Kroah-Hartman]

From: David S. Miller <davem@davemloft.net>

commit 5593530e56943182ebb6d81eca8a3be6db6dbba4 upstream.

This reverts commit 532b0f7ece4cb2ffd24dc723ddf55242d1188e5e.

More revisions coming up.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/tipc/core.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/net/tipc/core.c
+++ b/net/tipc/core.c
@@ -62,10 +62,6 @@ static int __net_init tipc_init_net(stru
 	INIT_LIST_HEAD(&tn->node_list);
 	spin_lock_init(&tn->node_list_lock);
 
-	err = tipc_socket_init();
-	if (err)
-		goto out_socket;
-
 	err = tipc_sk_rht_init(net);
 	if (err)
 		goto out_sk_rht;
@@ -92,8 +88,6 @@ out_subscr:
 out_nametbl:
 	tipc_sk_rht_destroy(net);
 out_sk_rht:
-	tipc_socket_stop();
-out_socket:
 	return err;
 }
 
@@ -104,7 +98,6 @@ static void __net_exit tipc_exit_net(str
 	tipc_bcast_stop(net);
 	tipc_nametbl_stop(net);
 	tipc_sk_rht_destroy(net);
-	tipc_socket_stop();
 }
 
 static struct pernet_operations tipc_net_ops = {
@@ -140,6 +133,10 @@ static int __init tipc_init(void)
 	if (err)
 		goto out_pernet;
 
+	err = tipc_socket_init();
+	if (err)
+		goto out_socket;
+
 	err = tipc_bearer_setup();
 	if (err)
 		goto out_bearer;
@@ -147,6 +144,8 @@ static int __init tipc_init(void)
 	pr_info("Started in single node mode\n");
 	return 0;
 out_bearer:
+	tipc_socket_stop();
+out_socket:
 	unregister_pernet_subsys(&tipc_net_ops);
 out_pernet:
 	tipc_unregister_sysctl();
@@ -162,6 +161,7 @@ out_netlink:
 static void __exit tipc_exit(void)
 {
 	tipc_bearer_cleanup();
+	tipc_socket_stop();
 	unregister_pernet_subsys(&tipc_net_ops);
 	tipc_netlink_stop();
 	tipc_netlink_compat_stop();

[PATCH 4.14 20/69] tipc: fix modprobe tipc failed after switch order of device registration

[Greg Kroah-Hartman]

From: Junwei Hu <hujunwei4@huawei.com>

commit 526f5b851a96566803ee4bee60d0a34df56c77f8 upstream.

Error message printed:
modprobe: ERROR: could not insert 'tipc': Address family not
supported by protocol.
when modprobe tipc after the following patch: switch order of
device registration, commit 7e27e8d6130c
("tipc: switch order of device registration to fix a crash")

Because sock_create_kern(net, AF_TIPC, ...) called by
tipc_topsrv_create_listener() in the initialization process
of tipc_init_net(), so tipc_socket_init() must be execute before that.
Meanwhile, tipc_net_id need to be initialized when sock_create()
called, and tipc_socket_init() is no need to be called for each namespace.

I add a variable tipc_topsrv_net_ops, and split the
register_pernet_subsys() of tipc into two parts, and split
tipc_socket_init() with initialization of pernet params.

By the way, I fixed resources rollback error when tipc_bcast_init()
failed in tipc_init_net().

Fixes: 7e27e8d6130c ("tipc: switch order of device registration to fix a crash")
Signed-off-by: Junwei Hu <hujunwei4@huawei.com>
Reported-by: Wang Wang <wangwang2@huawei.com>
Reported-by: syzbot+1e8114b61079bfe9cbc5@syzkaller.appspotmail.com
Reviewed-by: Kang Zhou <zhoukang7@huawei.com>
Reviewed-by: Suanming Mou <mousuanming@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/tipc/core.c   |   18 ++++++++++++------
 net/tipc/subscr.c |   14 ++++++++++++--
 net/tipc/subscr.h |    5 +++--
 3 files changed, 27 insertions(+), 10 deletions(-)

--- a/net/tipc/core.c
+++ b/net/tipc/core.c
@@ -71,9 +71,6 @@ static int __net_init tipc_init_net(stru
 		goto out_nametbl;
 
 	INIT_LIST_HEAD(&tn->dist_queue);
-	err = tipc_topsrv_start(net);
-	if (err)
-		goto out_subscr;
 
 	err = tipc_bcast_init(net);
 	if (err)
@@ -82,8 +79,6 @@ static int __net_init tipc_init_net(stru
 	return 0;
 
 out_bclink:
-	tipc_bcast_stop(net);
-out_subscr:
 	tipc_nametbl_stop(net);
 out_nametbl:
 	tipc_sk_rht_destroy(net);
@@ -93,7 +88,6 @@ out_sk_rht:
 
 static void __net_exit tipc_exit_net(struct net *net)
 {
-	tipc_topsrv_stop(net);
 	tipc_net_stop(net);
 	tipc_bcast_stop(net);
 	tipc_nametbl_stop(net);
@@ -107,6 +101,11 @@ static struct pernet_operations tipc_net
 	.size = sizeof(struct tipc_net),
 };
 
+static struct pernet_operations tipc_topsrv_net_ops = {
+	.init = tipc_topsrv_init_net,
+	.exit = tipc_topsrv_exit_net,
+};
+
 static int __init tipc_init(void)
 {
 	int err;
@@ -137,6 +136,10 @@ static int __init tipc_init(void)
 	if (err)
 		goto out_socket;
 
+	err = register_pernet_subsys(&tipc_topsrv_net_ops);
+	if (err)
+		goto out_pernet_topsrv;
+
 	err = tipc_bearer_setup();
 	if (err)
 		goto out_bearer;
@@ -144,6 +147,8 @@ static int __init tipc_init(void)
 	pr_info("Started in single node mode\n");
 	return 0;
 out_bearer:
+	unregister_pernet_subsys(&tipc_topsrv_net_ops);
+out_pernet_topsrv:
 	tipc_socket_stop();
 out_socket:
 	unregister_pernet_subsys(&tipc_net_ops);
@@ -161,6 +166,7 @@ out_netlink:
 static void __exit tipc_exit(void)
 {
 	tipc_bearer_cleanup();
+	unregister_pernet_subsys(&tipc_topsrv_net_ops);
 	tipc_socket_stop();
 	unregister_pernet_subsys(&tipc_net_ops);
 	tipc_netlink_stop();
--- a/net/tipc/subscr.c
+++ b/net/tipc/subscr.c
@@ -344,7 +344,7 @@ static void *tipc_subscrb_connect_cb(int
 	return (void *)tipc_subscrb_create(conid);
 }
 
-int tipc_topsrv_start(struct net *net)
+static int tipc_topsrv_start(struct net *net)
 {
 	struct tipc_net *tn = net_generic(net, tipc_net_id);
 	const char name[] = "topology_server";
@@ -382,7 +382,7 @@ int tipc_topsrv_start(struct net *net)
 	return tipc_server_start(topsrv);
 }
 
-void tipc_topsrv_stop(struct net *net)
+static void tipc_topsrv_stop(struct net *net)
 {
 	struct tipc_net *tn = net_generic(net, tipc_net_id);
 	struct tipc_server *topsrv = tn->topsrv;
@@ -391,3 +391,13 @@ void tipc_topsrv_stop(struct net *net)
 	kfree(topsrv->saddr);
 	kfree(topsrv);
 }
+
+int __net_init tipc_topsrv_init_net(struct net *net)
+{
+	return tipc_topsrv_start(net);
+}
+
+void __net_exit tipc_topsrv_exit_net(struct net *net)
+{
+	tipc_topsrv_stop(net);
+}
--- a/net/tipc/subscr.h
+++ b/net/tipc/subscr.h
@@ -75,8 +75,9 @@ void tipc_subscrp_report_overlap(struct
 void tipc_subscrp_convert_seq(struct tipc_name_seq *in, int swap,
 			      struct tipc_name_seq *out);
 u32 tipc_subscrp_convert_seq_type(u32 type, int swap);
-int tipc_topsrv_start(struct net *net);
-void tipc_topsrv_stop(struct net *net);
+
+int __net_init tipc_topsrv_init_net(struct net *net);
+void __net_exit tipc_topsrv_exit_net(struct net *net);
 
 void tipc_subscrp_put(struct tipc_subscription *subscription);
 void tipc_subscrp_get(struct tipc_subscription *subscription);

[PATCH 4.14 21/69] sparc64: Fix regression in non-hypervisor TLB flush xcall

[Greg Kroah-Hartman]

From: James Clarke <jrtc27@jrtc27.com>

commit d3c976c14ad8af421134c428b0a89ff8dd3bd8f8 upstream.

Previously, %g2 would end up with the value PAGE_SIZE, but after the
commit mentioned below it ends up with the value 1 due to being reused
for a different purpose. We need it to be PAGE_SIZE as we use it to step
through pages in our demap loop, otherwise we set different flags in the
low 12 bits of the address written to, thereby doing things other than a
nucleus page flush.

Fixes: a74ad5e660a9 ("sparc64: Handle extremely large kernel TLB range flushes more gracefully.")
Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/sparc/mm/ultra.S |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/sparc/mm/ultra.S
+++ b/arch/sparc/mm/ultra.S
@@ -587,7 +587,7 @@ xcall_flush_tlb_kernel_range:	/* 44 insn
 	sub		%g7, %g1, %g3
 	srlx		%g3, 18, %g2
 	brnz,pn		%g2, 2f
-	 add		%g2, 1, %g2
+	 sethi		%hi(PAGE_SIZE), %g2
 	sub		%g3, %g2, %g3
 	or		%g1, 0x20, %g1		! Nucleus
 1:	stxa		%g0, [%g1 + %g3] ASI_DMMU_DEMAP
@@ -751,7 +751,7 @@ __cheetah_xcall_flush_tlb_kernel_range:
 	sub		%g7, %g1, %g3
 	srlx		%g3, 18, %g2
 	brnz,pn		%g2, 2f
-	 add		%g2, 1, %g2
+	 sethi		%hi(PAGE_SIZE), %g2
 	sub		%g3, %g2, %g3
 	or		%g1, 0x20, %g1		! Nucleus
 1:	stxa		%g0, [%g1 + %g3] ASI_DMMU_DEMAP

[PATCH 4.14 22/69] include/linux/bitops.h: sanitize rotate primitives

[Greg Kroah-Hartman]

From: Rasmus Villemoes <linux@rasmusvillemoes.dk>

commit ef4d6f6b275c498f8e5626c99dbeefdc5027f843 upstream.

The ror32 implementation (word >> shift) | (word << (32 - shift) has
undefined behaviour if shift is outside the [1, 31] range.  Similarly
for the 64 bit variants.  Most callers pass a compile-time constant
(naturally in that range), but there's an UBSAN report that these may
actually be called with a shift count of 0.

Instead of special-casing that, we can make them DTRT for all values of
shift while also avoiding UB.  For some reason, this was already partly
done for rol32 (which was well-defined for [0, 31]).  gcc 8 recognizes
these patterns as rotates, so for example

  __u32 rol32(__u32 word, unsigned int shift)
  {
	return (word << (shift & 31)) | (word >> ((-shift) & 31));
  }

compiles to

0000000000000020 <rol32>:
  20:   89 f8                   mov    %edi,%eax
  22:   89 f1                   mov    %esi,%ecx
  24:   d3 c0                   rol    %cl,%eax
  26:   c3                      retq

Older compilers unfortunately do not do as well, but this only affects
the small minority of users that don't pass constants.

Due to integer promotions, ro[lr]8 were already well-defined for shifts
in [0, 8], and ro[lr]16 were mostly well-defined for shifts in [0, 16]
(only mostly - u16 gets promoted to _signed_ int, so if bit 15 is set,
word << 16 is undefined).  For consistency, update those as well.

Link: http://lkml.kernel.org/r/20190410211906.2190-1-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reported-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: Vadim Pasternak <vadimp@mellanox.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/bitops.h |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/include/linux/bitops.h
+++ b/include/linux/bitops.h
@@ -59,7 +59,7 @@ static __always_inline unsigned long hwe
  */
 static inline __u64 rol64(__u64 word, unsigned int shift)
 {
-	return (word << shift) | (word >> (64 - shift));
+	return (word << (shift & 63)) | (word >> ((-shift) & 63));
 }
 
 /**
@@ -69,7 +69,7 @@ static inline __u64 rol64(__u64 word, un
  */
 static inline __u64 ror64(__u64 word, unsigned int shift)
 {
-	return (word >> shift) | (word << (64 - shift));
+	return (word >> (shift & 63)) | (word << ((-shift) & 63));
 }
 
 /**
@@ -79,7 +79,7 @@ static inline __u64 ror64(__u64 word, un
  */
 static inline __u32 rol32(__u32 word, unsigned int shift)
 {
-	return (word << shift) | (word >> ((-shift) & 31));
+	return (word << (shift & 31)) | (word >> ((-shift) & 31));
 }
 
 /**
@@ -89,7 +89,7 @@ static inline __u32 rol32(__u32 word, un
  */
 static inline __u32 ror32(__u32 word, unsigned int shift)
 {
-	return (word >> shift) | (word << (32 - shift));
+	return (word >> (shift & 31)) | (word << ((-shift) & 31));
 }
 
 /**
@@ -99,7 +99,7 @@ static inline __u32 ror32(__u32 word, un
  */
 static inline __u16 rol16(__u16 word, unsigned int shift)
 {
-	return (word << shift) | (word >> (16 - shift));
+	return (word << (shift & 15)) | (word >> ((-shift) & 15));
 }
 
 /**
@@ -109,7 +109,7 @@ static inline __u16 rol16(__u16 word, un
  */
 static inline __u16 ror16(__u16 word, unsigned int shift)
 {
-	return (word >> shift) | (word << (16 - shift));
+	return (word >> (shift & 15)) | (word << ((-shift) & 15));
 }
 
 /**
@@ -119,7 +119,7 @@ static inline __u16 ror16(__u16 word, un
  */
 static inline __u8 rol8(__u8 word, unsigned int shift)
 {
-	return (word << shift) | (word >> (8 - shift));
+	return (word << (shift & 7)) | (word >> ((-shift) & 7));
 }
 
 /**
@@ -129,7 +129,7 @@ static inline __u8 rol8(__u8 word, unsig
  */
 static inline __u8 ror8(__u8 word, unsigned int shift)
 {
-	return (word >> shift) | (word << (8 - shift));
+	return (word >> (shift & 7)) | (word << ((-shift) & 7));
 }
 
 /**

[PATCH 4.14 23/69] xhci: update bounce buffer with correct sg num

[Greg Kroah-Hartman]

From: Henry Lin <henryl@nvidia.com>

commit 597c56e372dab2c7f79b8d700aad3a5deebf9d1b upstream.

This change fixes a data corruption issue occurred on USB hard disk for
the case that bounce buffer is used during transferring data.

While updating data between sg list and bounce buffer, current
implementation passes mapped sg number (urb->num_mapped_sgs) to
sg_pcopy_from_buffer() and sg_pcopy_to_buffer(). This causes data
not get copied if target buffer is located in the elements after
mapped sg elements. This change passes sg number for full list to
fix issue.

Besides, for copying data from bounce buffer, calling dma_unmap_single()
on the bounce buffer before copying data to sg list can avoid cache issue.

Fixes: f9c589e142d0 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Henry Lin <henryl@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-ring.c |   17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -667,6 +667,7 @@ static void xhci_unmap_td_bounce_buffer(
 	struct device *dev = xhci_to_hcd(xhci)->self.controller;
 	struct xhci_segment *seg = td->bounce_seg;
 	struct urb *urb = td->urb;
+	size_t len;
 
 	if (!ring || !seg || !urb)
 		return;
@@ -677,11 +678,14 @@ static void xhci_unmap_td_bounce_buffer(
 		return;
 	}
 
-	/* for in tranfers we need to copy the data from bounce to sg */
-	sg_pcopy_from_buffer(urb->sg, urb->num_mapped_sgs, seg->bounce_buf,
-			     seg->bounce_len, seg->bounce_offs);
 	dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len,
 			 DMA_FROM_DEVICE);
+	/* for in tranfers we need to copy the data from bounce to sg */
+	len = sg_pcopy_from_buffer(urb->sg, urb->num_sgs, seg->bounce_buf,
+			     seg->bounce_len, seg->bounce_offs);
+	if (len != seg->bounce_len)
+		xhci_warn(xhci, "WARN Wrong bounce buffer read length: %ld != %d\n",
+				len, seg->bounce_len);
 	seg->bounce_len = 0;
 	seg->bounce_offs = 0;
 }
@@ -3186,6 +3190,7 @@ static int xhci_align_td(struct xhci_hcd
 	unsigned int unalign;
 	unsigned int max_pkt;
 	u32 new_buff_len;
+	size_t len;
 
 	max_pkt = usb_endpoint_maxp(&urb->ep->desc);
 	unalign = (enqd_len + *trb_buff_len) % max_pkt;
@@ -3216,8 +3221,12 @@ static int xhci_align_td(struct xhci_hcd
 
 	/* create a max max_pkt sized bounce buffer pointed to by last trb */
 	if (usb_urb_dir_out(urb)) {
-		sg_pcopy_to_buffer(urb->sg, urb->num_mapped_sgs,
+		len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs,
 				   seg->bounce_buf, new_buff_len, enqd_len);
+		if (len != seg->bounce_len)
+			xhci_warn(xhci,
+				"WARN Wrong bounce buffer write length: %ld != %d\n",
+				len, seg->bounce_len);
 		seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
 						 max_pkt, DMA_TO_DEVICE);
 	} else {

[PATCH 4.14 24/69] xhci: Use %zu for printing size_t type

[Greg Kroah-Hartman]

From: Fabio Estevam <festevam@gmail.com>

commit c1a145a3ed9a40f3b6145feb97789e8eb49c5566 upstream.

Commit 597c56e372da ("xhci: update bounce buffer with correct sg num")
caused the following build warnings:

drivers/usb/host/xhci-ring.c:676:19: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'size_t {aka unsigned int}' [-Wformat=]

Use %zu for printing size_t type in order to fix the warnings.

Fixes: 597c56e372da ("xhci: update bounce buffer with correct sg num")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-ring.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -684,7 +684,7 @@ static void xhci_unmap_td_bounce_buffer(
 	len = sg_pcopy_from_buffer(urb->sg, urb->num_sgs, seg->bounce_buf,
 			     seg->bounce_len, seg->bounce_offs);
 	if (len != seg->bounce_len)
-		xhci_warn(xhci, "WARN Wrong bounce buffer read length: %ld != %d\n",
+		xhci_warn(xhci, "WARN Wrong bounce buffer read length: %zu != %d\n",
 				len, seg->bounce_len);
 	seg->bounce_len = 0;
 	seg->bounce_offs = 0;
@@ -3225,7 +3225,7 @@ static int xhci_align_td(struct xhci_hcd
 				   seg->bounce_buf, new_buff_len, enqd_len);
 		if (len != seg->bounce_len)
 			xhci_warn(xhci,
-				"WARN Wrong bounce buffer write length: %ld != %d\n",
+				"WARN Wrong bounce buffer write length: %zu != %d\n",
 				len, seg->bounce_len);
 		seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
 						 max_pkt, DMA_TO_DEVICE);

[PATCH 4.14 25/69] xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()

[Greg Kroah-Hartman]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

commit f7fac17ca925faa03fc5eb854c081a24075f8bad upstream.

Xhci_handshake() implements the algorithm already captured by
readl_poll_timeout_atomic(). Convert the former to use the latter to
avoid repetition.

Turned out this patch also fixes a bug on the AMD Stoneyridge platform
where usleep(1) sometimes takes over 10ms.
This means a 5 second timeout can easily take over 15 seconds which will
trigger the watchdog and reboot the system.

[Add info about patch fixing a bug to commit message -Mathias]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Raul E Rangel <rrangel@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci.c |   22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -21,6 +21,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/iopoll.h>
 #include <linux/irq.h>
 #include <linux/log2.h>
 #include <linux/module.h>
@@ -62,7 +63,6 @@ static bool td_on_ring(struct xhci_td *t
 	return false;
 }
 
-/* TODO: copied from ehci-hcd.c - can this be refactored? */
 /*
  * xhci_handshake - spin reading hc until handshake completes or fails
  * @ptr: address of hc register to be read
@@ -79,18 +79,16 @@ static bool td_on_ring(struct xhci_td *t
 int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec)
 {
 	u32	result;
+	int	ret;
 
-	do {
-		result = readl(ptr);
-		if (result == ~(u32)0)		/* card removed */
-			return -ENODEV;
-		result &= mask;
-		if (result == done)
-			return 0;
-		udelay(1);
-		usec--;
-	} while (usec > 0);
-	return -ETIMEDOUT;
+	ret = readl_poll_timeout_atomic(ptr, result,
+					(result & mask) == done ||
+					result == U32_MAX,
+					1, usec);
+	if (result == U32_MAX)		/* card removed */
+		return -ENODEV;
+
+	return ret;
 }
 
 /*

[PATCH 4.14 26/69] usb: xhci: avoid null pointer deref when bos field is NULL

[Greg Kroah-Hartman]

From: Carsten Schmid <carsten_schmid@mentor.com>

commit 7aa1bb2ffd84d6b9b5f546b079bb15cd0ab6e76e upstream.

With defective USB sticks we see the following error happen:
usb 1-3: new high-speed USB device number 6 using xhci_hcd
usb 1-3: device descriptor read/64, error -71
usb 1-3: device descriptor read/64, error -71
usb 1-3: new high-speed USB device number 7 using xhci_hcd
usb 1-3: device descriptor read/64, error -71
usb 1-3: unable to get BOS descriptor set
usb 1-3: New USB device found, idVendor=0781, idProduct=5581
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
...
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008

This comes from the following place:
[ 1660.215380] IP: xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd]
[ 1660.222092] PGD 0 P4D 0
[ 1660.224918] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 1660.425520] CPU: 1 PID: 38 Comm: kworker/1:1 Tainted: P     U  W  O    4.14.67-apl #1
[ 1660.434277] Workqueue: usb_hub_wq hub_event [usbcore]
[ 1660.439918] task: ffffa295b6ae4c80 task.stack: ffffad4580150000
[ 1660.446532] RIP: 0010:xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd]
[ 1660.453821] RSP: 0018:ffffad4580153c70 EFLAGS: 00010046
[ 1660.459655] RAX: 0000000000000000 RBX: ffffa295b4d7c000 RCX: 0000000000000002
[ 1660.467625] RDX: 0000000000000002 RSI: ffffffff984a55b2 RDI: ffffffff984a55b2
[ 1660.475586] RBP: ffffad4580153cc8 R08: 0000000000d6520a R09: 0000000000000001
[ 1660.483556] R10: ffffad4580a004a0 R11: 0000000000000286 R12: ffffa295b4d7c000
[ 1660.491525] R13: 0000000000010648 R14: ffffa295a84e1800 R15: 0000000000000000
[ 1660.499494] FS:  0000000000000000(0000) GS:ffffa295bfc80000(0000) knlGS:0000000000000000
[ 1660.508530] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1660.514947] CR2: 0000000000000008 CR3: 000000025a114000 CR4: 00000000003406a0
[ 1660.522917] Call Trace:
[ 1660.525657]  usb_set_usb2_hardware_lpm+0x3d/0x70 [usbcore]
[ 1660.531792]  usb_disable_device+0x242/0x260 [usbcore]
[ 1660.537439]  usb_disconnect+0xc1/0x2b0 [usbcore]
[ 1660.542600]  hub_event+0x596/0x18f0 [usbcore]
[ 1660.547467]  ? trace_preempt_on+0xdf/0x100
[ 1660.552040]  ? process_one_work+0x1c1/0x410
[ 1660.556708]  process_one_work+0x1d2/0x410
[ 1660.561184]  ? preempt_count_add.part.3+0x21/0x60
[ 1660.566436]  worker_thread+0x2d/0x3f0
[ 1660.570522]  kthread+0x122/0x140
[ 1660.574123]  ? process_one_work+0x410/0x410
[ 1660.578792]  ? kthread_create_on_node+0x60/0x60
[ 1660.583849]  ret_from_fork+0x3a/0x50
[ 1660.587839] Code: 00 49 89 c3 49 8b 84 24 50 16 00 00 8d 4a ff 48 8d 04 c8 48 89 ca 4c 8b 10 45 8b 6a 04 48 8b 00 48 89 45 c0 49 8b 86 80 03 00 00 <48> 8b 40 08 8b 40 03 0f 1f 44 00 00 45 85 ff 0f 84 81 01 00 00
[ 1660.608980] RIP: xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] RSP: ffffad4580153c70
[ 1660.617921] CR2: 0000000000000008

Tracking this down shows that udev->bos is NULL in the following code:
(xhci.c, in xhci_set_usb2_hardware_lpm)
	field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);  <<<<<<< here

	xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",
			enable ? "enable" : "disable", port_num + 1);

	if (enable) {
		/* Host supports BESL timeout instead of HIRD */
		if (udev->usb2_hw_lpm_besl_capable) {
			/* if device doesn't have a preferred BESL value use a
			 * default one which works with mixed HIRD and BESL
			 * systems. See XHCI_DEFAULT_BESL definition in xhci.h
			 */
			if ((field & USB_BESL_SUPPORT) &&
			    (field & USB_BESL_BASELINE_VALID))
				hird = USB_GET_BESL_BASELINE(field);
			else
				hird = udev->l1_params.besl;

The failing case is when disabling LPM. So it is sufficient to avoid
access to udev->bos by moving the instruction into the "enable" clause.

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Carsten Schmid <carsten_schmid@mentor.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4153,7 +4153,6 @@ static int xhci_set_usb2_hardware_lpm(st
 	pm_addr = port_array[port_num] + PORTPMSC;
 	pm_val = readl(pm_addr);
 	hlpm_addr = port_array[port_num] + PORTHLPMC;
-	field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
 
 	xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",
 			enable ? "enable" : "disable", port_num + 1);
@@ -4165,6 +4164,7 @@ static int xhci_set_usb2_hardware_lpm(st
 			 * default one which works with mixed HIRD and BESL
 			 * systems. See XHCI_DEFAULT_BESL definition in xhci.h
 			 */
+			field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
 			if ((field & USB_BESL_SUPPORT) &&
 			    (field & USB_BESL_BASELINE_VALID))
 				hird = USB_GET_BESL_BASELINE(field);

[PATCH 4.14 27/69] usbip: usbip_host: fix BUG: sleeping function called from invalid context

[Greg Kroah-Hartman]

From: Shuah Khan <skhan@linuxfoundation.org>

commit 0c9e8b3cad654bfc499c10b652fbf8f0b890af8f upstream.

stub_probe() and stub_disconnect() call functions which could call
sleeping function in invalid context whil holding busid_lock.

Fix the problem by refining the lock holds to short critical sections
to change the busid_priv fields. This fix restructures the code to
limit the lock holds in stub_probe() and stub_disconnect().

stub_probe():

[15217.927028] BUG: sleeping function called from invalid context at mm/slab.h:418
[15217.927038] in_atomic(): 1, irqs_disabled(): 0, pid: 29087, name: usbip
[15217.927044] 5 locks held by usbip/29087:
[15217.927047]  #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0
[15217.927062]  #1: 000000008f9ba75b (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0
[15217.927072]  #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50
[15217.927082]  #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50
[15217.927090]  #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host]
[15217.927103] CPU: 3 PID: 29087 Comm: usbip Tainted: G        W         5.1.0-rc6+ #40
[15217.927106] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013
[15217.927109] Call Trace:
[15217.927118]  dump_stack+0x63/0x85
[15217.927127]  ___might_sleep+0xff/0x120
[15217.927133]  __might_sleep+0x4a/0x80
[15217.927143]  kmem_cache_alloc_trace+0x1aa/0x210
[15217.927156]  stub_probe+0xe8/0x440 [usbip_host]
[15217.927171]  usb_probe_device+0x34/0x70

stub_disconnect():

[15279.182478] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908
[15279.182487] in_atomic(): 1, irqs_disabled(): 0, pid: 29114, name: usbip
[15279.182492] 5 locks held by usbip/29114:
[15279.182494]  #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0
[15279.182506]  #1: 00000000702cf0f3 (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0
[15279.182514]  #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50
[15279.182522]  #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50
[15279.182529]  #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host]
[15279.182541] CPU: 0 PID: 29114 Comm: usbip Tainted: G        W         5.1.0-rc6+ #40
[15279.182543] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013
[15279.182546] Call Trace:
[15279.182554]  dump_stack+0x63/0x85
[15279.182561]  ___might_sleep+0xff/0x120
[15279.182566]  __might_sleep+0x4a/0x80
[15279.182574]  __mutex_lock+0x55/0x950
[15279.182582]  ? get_busid_priv+0x48/0x60 [usbip_host]
[15279.182587]  ? reacquire_held_locks+0xec/0x1a0
[15279.182591]  ? get_busid_priv+0x48/0x60 [usbip_host]
[15279.182597]  ? find_held_lock+0x94/0xa0
[15279.182609]  mutex_lock_nested+0x1b/0x20
[15279.182614]  ? mutex_lock_nested+0x1b/0x20
[15279.182618]  kernfs_remove_by_name_ns+0x2a/0x90
[15279.182625]  sysfs_remove_file_ns+0x15/0x20
[15279.182629]  device_remove_file+0x19/0x20
[15279.182634]  stub_disconnect+0x6d/0x180 [usbip_host]
[15279.182643]  usb_unbind_device+0x27/0x60

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/usbip/stub_dev.c |   65 ++++++++++++++++++++++++++++---------------
 1 file changed, 43 insertions(+), 22 deletions(-)

--- a/drivers/usb/usbip/stub_dev.c
+++ b/drivers/usb/usbip/stub_dev.c
@@ -315,9 +315,17 @@ static int stub_probe(struct usb_device
 	const char *udev_busid = dev_name(&udev->dev);
 	struct bus_id_priv *busid_priv;
 	int rc = 0;
+	char save_status;
 
 	dev_dbg(&udev->dev, "Enter probe\n");
 
+	/* Not sure if this is our device. Allocate here to avoid
+	 * calling alloc while holding busid_table lock.
+	 */
+	sdev = stub_device_alloc(udev);
+	if (!sdev)
+		return -ENOMEM;
+
 	/* check we should claim or not by busid_table */
 	busid_priv = get_busid_priv(udev_busid);
 	if (!busid_priv || (busid_priv->status == STUB_BUSID_REMOV) ||
@@ -332,14 +340,14 @@ static int stub_probe(struct usb_device
 		 * See driver_probe_device() in driver/base/dd.c
 		 */
 		rc = -ENODEV;
-		goto call_put_busid_priv;
+		goto sdev_free;
 	}
 
 	if (udev->descriptor.bDeviceClass == USB_CLASS_HUB) {
 		dev_dbg(&udev->dev, "%s is a usb hub device... skip!\n",
 			 udev_busid);
 		rc = -ENODEV;
-		goto call_put_busid_priv;
+		goto sdev_free;
 	}
 
 	if (!strcmp(udev->bus->bus_name, "vhci_hcd")) {
@@ -348,15 +356,9 @@ static int stub_probe(struct usb_device
 			udev_busid);
 
 		rc = -ENODEV;
-		goto call_put_busid_priv;
+		goto sdev_free;
 	}
 
-	/* ok, this is my device */
-	sdev = stub_device_alloc(udev);
-	if (!sdev) {
-		rc = -ENOMEM;
-		goto call_put_busid_priv;
-	}
 
 	dev_info(&udev->dev,
 		"usbip-host: register new device (bus %u dev %u)\n",
@@ -366,9 +368,13 @@ static int stub_probe(struct usb_device
 
 	/* set private data to usb_device */
 	dev_set_drvdata(&udev->dev, sdev);
+
 	busid_priv->sdev = sdev;
 	busid_priv->udev = udev;
 
+	save_status = busid_priv->status;
+	busid_priv->status = STUB_BUSID_ALLOC;
+
 	/*
 	 * Claim this hub port.
 	 * It doesn't matter what value we pass as owner
@@ -381,15 +387,16 @@ static int stub_probe(struct usb_device
 		goto err_port;
 	}
 
+	/* release the busid_lock */
+	put_busid_priv(busid_priv);
+
 	rc = stub_add_files(&udev->dev);
 	if (rc) {
 		dev_err(&udev->dev, "stub_add_files for %s\n", udev_busid);
 		goto err_files;
 	}
-	busid_priv->status = STUB_BUSID_ALLOC;
 
-	rc = 0;
-	goto call_put_busid_priv;
+	return 0;
 
 err_files:
 	usb_hub_release_port(udev->parent, udev->portnum,
@@ -398,23 +405,24 @@ err_port:
 	dev_set_drvdata(&udev->dev, NULL);
 	usb_put_dev(udev);
 
+	/* we already have busid_priv, just lock busid_lock */
+	spin_lock(&busid_priv->busid_lock);
 	busid_priv->sdev = NULL;
+	busid_priv->status = save_status;
+sdev_free:
 	stub_device_free(sdev);
-
-call_put_busid_priv:
+	/* release the busid_lock */
 	put_busid_priv(busid_priv);
+
 	return rc;
 }
 
 static void shutdown_busid(struct bus_id_priv *busid_priv)
 {
-	if (busid_priv->sdev && !busid_priv->shutdown_busid) {
-		busid_priv->shutdown_busid = 1;
-		usbip_event_add(&busid_priv->sdev->ud, SDEV_EVENT_REMOVED);
+	usbip_event_add(&busid_priv->sdev->ud, SDEV_EVENT_REMOVED);
 
-		/* wait for the stop of the event handler */
-		usbip_stop_eh(&busid_priv->sdev->ud);
-	}
+	/* wait for the stop of the event handler */
+	usbip_stop_eh(&busid_priv->sdev->ud);
 }
 
 /*
@@ -446,6 +454,9 @@ static void stub_disconnect(struct usb_d
 
 	dev_set_drvdata(&udev->dev, NULL);
 
+	/* release busid_lock before call to remove device files */
+	put_busid_priv(busid_priv);
+
 	/*
 	 * NOTE: rx/tx threads are invoked for each usb_device.
 	 */
@@ -456,18 +467,27 @@ static void stub_disconnect(struct usb_d
 				  (struct usb_dev_state *) udev);
 	if (rc) {
 		dev_dbg(&udev->dev, "unable to release port\n");
-		goto call_put_busid_priv;
+		return;
 	}
 
 	/* If usb reset is called from event handler */
 	if (usbip_in_eh(current))
-		goto call_put_busid_priv;
+		return;
+
+	/* we already have busid_priv, just lock busid_lock */
+	spin_lock(&busid_priv->busid_lock);
+	if (!busid_priv->shutdown_busid)
+		busid_priv->shutdown_busid = 1;
+	/* release busid_lock */
+	put_busid_priv(busid_priv);
 
 	/* shutdown the current connection */
 	shutdown_busid(busid_priv);
 
 	usb_put_dev(sdev->udev);
 
+	/* we already have busid_priv, just lock busid_lock */
+	spin_lock(&busid_priv->busid_lock);
 	/* free sdev */
 	busid_priv->sdev = NULL;
 	stub_device_free(sdev);
@@ -476,6 +496,7 @@ static void stub_disconnect(struct usb_d
 		busid_priv->status = STUB_BUSID_ADDED;
 
 call_put_busid_priv:
+	/* release busid_lock */
 	put_busid_priv(busid_priv);
 }
 

[PATCH 4.14 28/69] usbip: usbip_host: fix stub_dev lock context imbalance regression

[Greg Kroah-Hartman]

From: Shuah Khan <skhan@linuxfoundation.org>

commit 3ea3091f1bd8586125848c62be295910e9802af0 upstream.

Fix the following sparse context imbalance regression introduced in
a patch that fixed sleeping function called from invalid context bug.

kbuild test robot reported on:

tree/branch: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git  usb-linus

Regressions in current branch:

drivers/usb/usbip/stub_dev.c:399:9: sparse: sparse: context imbalance in 'stub_probe' - different lock contexts for basic block
drivers/usb/usbip/stub_dev.c:418:13: sparse: sparse: context imbalance in 'stub_disconnect' - different lock contexts for basic block
drivers/usb/usbip/stub_dev.c:464:1-10: second lock on line 476

Error ids grouped by kconfigs:

recent_errors
├── i386-allmodconfig
│   └── drivers-usb-usbip-stub_dev.c:second-lock-on-line
├── x86_64-allmodconfig
│   ├── drivers-usb-usbip-stub_dev.c:sparse:sparse:context-imbalance-in-stub_disconnect-different-lock-contexts-for-basic-block
│   └── drivers-usb-usbip-stub_dev.c:sparse:sparse:context-imbalance-in-stub_probe-different-lock-contexts-for-basic-block
└── x86_64-allyesconfig
    └── drivers-usb-usbip-stub_dev.c:second-lock-on-line

This is a real problem in an error leg where spin_lock() is called on an
already held lock.

Fix the imbalance in stub_probe() and stub_disconnect().

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fixes: 0c9e8b3cad65 ("usbip: usbip_host: fix BUG: sleeping function called from invalid context")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/usbip/stub_dev.c |   36 +++++++++++++++++++++++-------------
 1 file changed, 23 insertions(+), 13 deletions(-)

--- a/drivers/usb/usbip/stub_dev.c
+++ b/drivers/usb/usbip/stub_dev.c
@@ -340,14 +340,17 @@ static int stub_probe(struct usb_device
 		 * See driver_probe_device() in driver/base/dd.c
 		 */
 		rc = -ENODEV;
-		goto sdev_free;
+		if (!busid_priv)
+			goto sdev_free;
+
+		goto call_put_busid_priv;
 	}
 
 	if (udev->descriptor.bDeviceClass == USB_CLASS_HUB) {
 		dev_dbg(&udev->dev, "%s is a usb hub device... skip!\n",
 			 udev_busid);
 		rc = -ENODEV;
-		goto sdev_free;
+		goto call_put_busid_priv;
 	}
 
 	if (!strcmp(udev->bus->bus_name, "vhci_hcd")) {
@@ -356,7 +359,7 @@ static int stub_probe(struct usb_device
 			udev_busid);
 
 		rc = -ENODEV;
-		goto sdev_free;
+		goto call_put_busid_priv;
 	}
 
 
@@ -375,6 +378,9 @@ static int stub_probe(struct usb_device
 	save_status = busid_priv->status;
 	busid_priv->status = STUB_BUSID_ALLOC;
 
+	/* release the busid_lock */
+	put_busid_priv(busid_priv);
+
 	/*
 	 * Claim this hub port.
 	 * It doesn't matter what value we pass as owner
@@ -387,9 +393,6 @@ static int stub_probe(struct usb_device
 		goto err_port;
 	}
 
-	/* release the busid_lock */
-	put_busid_priv(busid_priv);
-
 	rc = stub_add_files(&udev->dev);
 	if (rc) {
 		dev_err(&udev->dev, "stub_add_files for %s\n", udev_busid);
@@ -409,11 +412,17 @@ err_port:
 	spin_lock(&busid_priv->busid_lock);
 	busid_priv->sdev = NULL;
 	busid_priv->status = save_status;
-sdev_free:
-	stub_device_free(sdev);
+	spin_unlock(&busid_priv->busid_lock);
+	/* lock is released - go to free */
+	goto sdev_free;
+
+call_put_busid_priv:
 	/* release the busid_lock */
 	put_busid_priv(busid_priv);
 
+sdev_free:
+	stub_device_free(sdev);
+
 	return rc;
 }
 
@@ -449,7 +458,9 @@ static void stub_disconnect(struct usb_d
 	/* get stub_device */
 	if (!sdev) {
 		dev_err(&udev->dev, "could not get device");
-		goto call_put_busid_priv;
+		/* release busid_lock */
+		put_busid_priv(busid_priv);
+		return;
 	}
 
 	dev_set_drvdata(&udev->dev, NULL);
@@ -479,7 +490,7 @@ static void stub_disconnect(struct usb_d
 	if (!busid_priv->shutdown_busid)
 		busid_priv->shutdown_busid = 1;
 	/* release busid_lock */
-	put_busid_priv(busid_priv);
+	spin_unlock(&busid_priv->busid_lock);
 
 	/* shutdown the current connection */
 	shutdown_busid(busid_priv);
@@ -494,10 +505,9 @@ static void stub_disconnect(struct usb_d
 
 	if (busid_priv->status == STUB_BUSID_ALLOC)
 		busid_priv->status = STUB_BUSID_ADDED;
-
-call_put_busid_priv:
 	/* release busid_lock */
-	put_busid_priv(busid_priv);
+	spin_unlock(&busid_priv->busid_lock);
+	return;
 }
 
 #ifdef CONFIG_PM

[PATCH 4.14 29/69] USB: Fix slab-out-of-bounds write in usb_get_bos_descriptor

[Greg Kroah-Hartman]

From: Alan Stern <stern@rowland.harvard.edu>

commit a03ff54460817c76105f81f3aa8ef655759ccc9a upstream.

The syzkaller USB fuzzer found a slab-out-of-bounds write bug in the
USB core, caused by a failure to check the actual size of a BOS
descriptor.  This patch adds a check to make sure the descriptor is at
least as large as it is supposed to be, so that the code doesn't
inadvertently access memory beyond the end of the allocated region
when assigning to dev->bos->desc->bNumDeviceCaps later on.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+71f1e64501a309fcc012@syzkaller.appspotmail.com
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/config.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -936,8 +936,8 @@ int usb_get_bos_descriptor(struct usb_de
 
 	/* Get BOS descriptor */
 	ret = usb_get_descriptor(dev, USB_DT_BOS, 0, bos, USB_DT_BOS_SIZE);
-	if (ret < USB_DT_BOS_SIZE) {
-		dev_err(ddev, "unable to get BOS descriptor\n");
+	if (ret < USB_DT_BOS_SIZE || bos->bLength < USB_DT_BOS_SIZE) {
+		dev_err(ddev, "unable to get BOS descriptor or descriptor too short\n");
 		if (ret >= 0)
 			ret = -ENOMSG;
 		kfree(bos);

[PATCH 4.14 30/69] USB: sisusbvga: fix oops in error path of sisusb_probe

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit 9a5729f68d3a82786aea110b1bfe610be318f80a upstream.

The pointer used to log a failure of usb_register_dev() must
be set before the error is logged.

v2: fix that minor is not available before registration

Signed-off-by: oliver Neukum <oneukum@suse.com>
Reported-by: syzbot+a0cbdbd6d169020c8959@syzkaller.appspotmail.com
Fixes: 7b5cd5fefbe02 ("USB: SisUSB2VGA: Convert printk to dev_* macros")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/misc/sisusbvga/sisusb.c |   15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3028,6 +3028,13 @@ static int sisusb_probe(struct usb_inter
 
 	mutex_init(&(sisusb->lock));
 
+	sisusb->sisusb_dev = dev;
+	sisusb->vrambase   = SISUSB_PCI_MEMBASE;
+	sisusb->mmiobase   = SISUSB_PCI_MMIOBASE;
+	sisusb->mmiosize   = SISUSB_PCI_MMIOSIZE;
+	sisusb->ioportbase = SISUSB_PCI_IOPORTBASE;
+	/* Everything else is zero */
+
 	/* Register device */
 	retval = usb_register_dev(intf, &usb_sisusb_class);
 	if (retval) {
@@ -3038,13 +3045,7 @@ static int sisusb_probe(struct usb_inter
 		goto error_1;
 	}
 
-	sisusb->sisusb_dev = dev;
-	sisusb->minor      = intf->minor;
-	sisusb->vrambase   = SISUSB_PCI_MEMBASE;
-	sisusb->mmiobase   = SISUSB_PCI_MMIOBASE;
-	sisusb->mmiosize   = SISUSB_PCI_MMIOSIZE;
-	sisusb->ioportbase = SISUSB_PCI_IOPORTBASE;
-	/* Everything else is zero */
+	sisusb->minor = intf->minor;
 
 	/* Allocate buffers */
 	sisusb->ibufsize = SISUSB_IBUF_SIZE;

[PATCH 4.14 31/69] USB: Add LPM quirk for Surface Dock GigE adapter

[Greg Kroah-Hartman]

From: Maximilian Luz <luzmaximilian@gmail.com>

commit ea261113385ac0a71c2838185f39e8452d54b152 upstream.

Without USB_QUIRK_NO_LPM ethernet will not work and rtl8152 will
complain with

    r8152 <device...>: Stop submitting intr, status -71

Adding the quirk resolves this. As the dock is externally powered, this
should not have any drawbacks.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/quirks.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -64,6 +64,9 @@ static const struct usb_device_id usb_qu
 	/* Microsoft LifeCam-VX700 v2.0 */
 	{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Microsoft Surface Dock Ethernet (RTL8153 GigE) */
+	{ USB_DEVICE(0x045e, 0x07c6), .driver_info = USB_QUIRK_NO_LPM },
+
 	/* Cherry Stream G230 2.0 (G85-231) and 3.0 (G85-232) */
 	{ USB_DEVICE(0x046a, 0x0023), .driver_info = USB_QUIRK_RESET_RESUME },
 

[PATCH 4.14 32/69] USB: rio500: refuse more than one device at a time

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit 3864d33943b4a76c6e64616280e98d2410b1190f upstream.

This driver is using a global variable. It cannot handle more than
one device at a time. The issue has been existing since the dawn
of the driver.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: syzbot+35f04d136fc975a70da4@syzkaller.appspotmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/misc/rio500.c |   24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -460,15 +460,23 @@ static int probe_rio(struct usb_interfac
 {
 	struct usb_device *dev = interface_to_usbdev(intf);
 	struct rio_usb_data *rio = &rio_instance;
-	int retval;
+	int retval = 0;
 
-	dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum);
+	mutex_lock(&rio500_mutex);
+	if (rio->present) {
+		dev_info(&intf->dev, "Second USB Rio at address %d refused\n", dev->devnum);
+		retval = -EBUSY;
+		goto bail_out;
+	} else {
+		dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum);
+	}
 
 	retval = usb_register_dev(intf, &usb_rio_class);
 	if (retval) {
 		dev_err(&dev->dev,
 			"Not able to get a minor for this device.\n");
-		return -ENOMEM;
+		retval = -ENOMEM;
+		goto bail_out;
 	}
 
 	rio->rio_dev = dev;
@@ -477,7 +485,8 @@ static int probe_rio(struct usb_interfac
 		dev_err(&dev->dev,
 			"probe_rio: Not enough memory for the output buffer\n");
 		usb_deregister_dev(intf, &usb_rio_class);
-		return -ENOMEM;
+		retval = -ENOMEM;
+		goto bail_out;
 	}
 	dev_dbg(&intf->dev, "obuf address:%p\n", rio->obuf);
 
@@ -486,7 +495,8 @@ static int probe_rio(struct usb_interfac
 			"probe_rio: Not enough memory for the input buffer\n");
 		usb_deregister_dev(intf, &usb_rio_class);
 		kfree(rio->obuf);
-		return -ENOMEM;
+		retval = -ENOMEM;
+		goto bail_out;
 	}
 	dev_dbg(&intf->dev, "ibuf address:%p\n", rio->ibuf);
 
@@ -494,8 +504,10 @@ static int probe_rio(struct usb_interfac
 
 	usb_set_intfdata (intf, rio);
 	rio->present = 1;
+bail_out:
+	mutex_unlock(&rio500_mutex);
 
-	return 0;
+	return retval;
 }
 
 static void disconnect_rio(struct usb_interface *intf)

[PATCH 4.14 33/69] USB: rio500: fix memory leak in close after disconnect

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit e0feb73428b69322dd5caae90b0207de369b5575 upstream.

If a disconnected device is closed, rio_close() must free
the buffers.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/misc/rio500.c |   17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -99,9 +99,22 @@ static int close_rio(struct inode *inode
 {
 	struct rio_usb_data *rio = &rio_instance;
 
-	rio->isopen = 0;
+	/* against disconnect() */
+	mutex_lock(&rio500_mutex);
+	mutex_lock(&(rio->lock));
 
-	dev_info(&rio->rio_dev->dev, "Rio closed.\n");
+	rio->isopen = 0;
+	if (!rio->present) {
+		/* cleanup has been delayed */
+		kfree(rio->ibuf);
+		kfree(rio->obuf);
+		rio->ibuf = NULL;
+		rio->obuf = NULL;
+	} else {
+		dev_info(&rio->rio_dev->dev, "Rio closed.\n");
+	}
+	mutex_unlock(&(rio->lock));
+	mutex_unlock(&rio500_mutex);
 	return 0;
 }
 

[PATCH 4.14 34/69] media: usb: siano: Fix general protection fault in smsusb

[Greg Kroah-Hartman]

From: Alan Stern <stern@rowland.harvard.edu>

commit 31e0456de5be379b10fea0fa94a681057114a96e upstream.

The syzkaller USB fuzzer found a general-protection-fault bug in the
smsusb part of the Siano DVB driver.  The fault occurs during probe
because the driver assumes without checking that the device has both
IN and OUT endpoints and the IN endpoint is ep1.

By slightly rearranging the driver's initialization code, we can make
the appropriate checks early on and thus avoid the problem.  If the
expected endpoints aren't present, the new code safely returns -ENODEV
from the probe routine.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+53f029db71c19a47325a@syzkaller.appspotmail.com
CC: <stable@vger.kernel.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/siano/smsusb.c |   33 ++++++++++++++++++++-------------
 1 file changed, 20 insertions(+), 13 deletions(-)

--- a/drivers/media/usb/siano/smsusb.c
+++ b/drivers/media/usb/siano/smsusb.c
@@ -402,6 +402,7 @@ static int smsusb_init_device(struct usb
 	struct smsusb_device_t *dev;
 	void *mdev;
 	int i, rc;
+	int in_maxp;
 
 	/* create device object */
 	dev = kzalloc(sizeof(struct smsusb_device_t), GFP_KERNEL);
@@ -413,6 +414,24 @@ static int smsusb_init_device(struct usb
 	dev->udev = interface_to_usbdev(intf);
 	dev->state = SMSUSB_DISCONNECTED;
 
+	for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
+		struct usb_endpoint_descriptor *desc =
+				&intf->cur_altsetting->endpoint[i].desc;
+
+		if (desc->bEndpointAddress & USB_DIR_IN) {
+			dev->in_ep = desc->bEndpointAddress;
+			in_maxp = usb_endpoint_maxp(desc);
+		} else {
+			dev->out_ep = desc->bEndpointAddress;
+		}
+	}
+
+	pr_debug("in_ep = %02x, out_ep = %02x\n", dev->in_ep, dev->out_ep);
+	if (!dev->in_ep || !dev->out_ep) {	/* Missing endpoints? */
+		smsusb_term_device(intf);
+		return -ENODEV;
+	}
+
 	params.device_type = sms_get_board(board_id)->type;
 
 	switch (params.device_type) {
@@ -427,24 +446,12 @@ static int smsusb_init_device(struct usb
 		/* fall-thru */
 	default:
 		dev->buffer_size = USB2_BUFFER_SIZE;
-		dev->response_alignment =
-		    le16_to_cpu(dev->udev->ep_in[1]->desc.wMaxPacketSize) -
-		    sizeof(struct sms_msg_hdr);
+		dev->response_alignment = in_maxp - sizeof(struct sms_msg_hdr);
 
 		params.flags |= SMS_DEVICE_FAMILY2;
 		break;
 	}
 
-	for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
-		if (intf->cur_altsetting->endpoint[i].desc. bEndpointAddress & USB_DIR_IN)
-			dev->in_ep = intf->cur_altsetting->endpoint[i].desc.bEndpointAddress;
-		else
-			dev->out_ep = intf->cur_altsetting->endpoint[i].desc.bEndpointAddress;
-	}
-
-	pr_debug("in_ep = %02x, out_ep = %02x\n",
-		dev->in_ep, dev->out_ep);
-
 	params.device = &dev->udev->dev;
 	params.buffer_size = dev->buffer_size;
 	params.num_buffers = MAX_BUFFERS;

[PATCH 4.14 35/69] media: usb: siano: Fix false-positive "uninitialized variable" warning

[Greg Kroah-Hartman]

From: Alan Stern <stern@rowland.harvard.edu>

commit 45457c01171fd1488a7000d1751c06ed8560ee38 upstream.

GCC complains about an apparently uninitialized variable recently
added to smsusb_init_device().  It's a false positive, but to silence
the warning this patch adds a trivial initialization.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: kbuild test robot <lkp@intel.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/siano/smsusb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/usb/siano/smsusb.c
+++ b/drivers/media/usb/siano/smsusb.c
@@ -402,7 +402,7 @@ static int smsusb_init_device(struct usb
 	struct smsusb_device_t *dev;
 	void *mdev;
 	int i, rc;
-	int in_maxp;
+	int in_maxp = 0;
 
 	/* create device object */
 	dev = kzalloc(sizeof(struct smsusb_device_t), GFP_KERNEL);

[PATCH 4.14 36/69] media: smsusb: better handle optional alignment

[Greg Kroah-Hartman]

From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

commit a47686636d84eaec5c9c6e84bd5f96bed34d526d upstream.

Most Siano devices require an alignment for the response.

Changeset f3be52b0056a ("media: usb: siano: Fix general protection fault in smsusb")
changed the logic with gets such aligment, but it now produces a
sparce warning:

drivers/media/usb/siano/smsusb.c: In function 'smsusb_init_device':
drivers/media/usb/siano/smsusb.c:447:37: warning: 'in_maxp' may be used uninitialized in this function [-Wmaybe-uninitialized]
  447 |   dev->response_alignment = in_maxp - sizeof(struct sms_msg_hdr);
      |                             ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~

The sparse message itself is bogus, but a broken (or fake) USB
eeprom could produce a negative value for response_alignment.

So, change the code in order to check if the result is not
negative.

Fixes: 31e0456de5be ("media: usb: siano: Fix general protection fault in smsusb")
CC: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/siano/smsusb.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/media/usb/siano/smsusb.c
+++ b/drivers/media/usb/siano/smsusb.c
@@ -402,7 +402,7 @@ static int smsusb_init_device(struct usb
 	struct smsusb_device_t *dev;
 	void *mdev;
 	int i, rc;
-	int in_maxp = 0;
+	int align = 0;
 
 	/* create device object */
 	dev = kzalloc(sizeof(struct smsusb_device_t), GFP_KERNEL);
@@ -420,14 +420,14 @@ static int smsusb_init_device(struct usb
 
 		if (desc->bEndpointAddress & USB_DIR_IN) {
 			dev->in_ep = desc->bEndpointAddress;
-			in_maxp = usb_endpoint_maxp(desc);
+			align = usb_endpoint_maxp(desc) - sizeof(struct sms_msg_hdr);
 		} else {
 			dev->out_ep = desc->bEndpointAddress;
 		}
 	}
 
 	pr_debug("in_ep = %02x, out_ep = %02x\n", dev->in_ep, dev->out_ep);
-	if (!dev->in_ep || !dev->out_ep) {	/* Missing endpoints? */
+	if (!dev->in_ep || !dev->out_ep || align < 0) {  /* Missing endpoints? */
 		smsusb_term_device(intf);
 		return -ENODEV;
 	}
@@ -446,7 +446,7 @@ static int smsusb_init_device(struct usb
 		/* fall-thru */
 	default:
 		dev->buffer_size = USB2_BUFFER_SIZE;
-		dev->response_alignment = in_maxp - sizeof(struct sms_msg_hdr);
+		dev->response_alignment = align;
 
 		params.flags |= SMS_DEVICE_FAMILY2;
 		break;

[PATCH 4.14 37/69] scsi: zfcp: fix missing zfcp_port reference put on -EBUSY from port_remove

[Greg Kroah-Hartman]

From: Steffen Maier <maier@linux.ibm.com>

commit d27e5e07f9c49bf2a6a4ef254ce531c1b4fb5a38 upstream.

With this early return due to zfcp_unit child(ren), we don't use the
zfcp_port reference from the earlier zfcp_get_port_by_wwpn() anymore and
need to put it.

Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Fixes: d99b601b6338 ("[SCSI] zfcp: restore refcount check on port_remove")
Cc: <stable@vger.kernel.org> #3.7+
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/scsi/zfcp_sysfs.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/s390/scsi/zfcp_sysfs.c
+++ b/drivers/s390/scsi/zfcp_sysfs.c
@@ -264,6 +264,7 @@ static ssize_t zfcp_sysfs_port_remove_st
 	if (atomic_read(&port->units) > 0) {
 		retval = -EBUSY;
 		mutex_unlock(&zfcp_sysfs_port_units_mutex);
+		put_device(&port->dev); /* undo zfcp_get_port_by_wwpn() */
 		goto out;
 	}
 	/* port is about to be removed, so no more unit_add */

[PATCH 4.14 38/69] scsi: zfcp: fix to prevent port_remove with pure auto scan LUNs (only sdevs)

[Greg Kroah-Hartman]

From: Steffen Maier <maier@linux.ibm.com>

commit ef4021fe5fd77ced0323cede27979d80a56211ca upstream.

When the user tries to remove a zfcp port via sysfs, we only rejected it if
there are zfcp unit children under the port. With purely automatically
scanned LUNs there are no zfcp units but only SCSI devices. In such cases,
the port_remove erroneously continued. We close the port and this
implicitly closes all LUNs under the port. The SCSI devices survive with
their private zfcp_scsi_dev still holding a reference to the "removed"
zfcp_port (still allocated but invisible in sysfs) [zfcp_get_port_by_wwpn
in zfcp_scsi_slave_alloc]. This is not a problem as long as the fc_rport
stays blocked. Once (auto) port scan brings back the removed port, we
unblock its fc_rport again by design.  However, there is no mechanism that
would recover (open) the LUNs under the port (no "ersfs_3" without
zfcp_unit [zfcp_erp_strategy_followup_success]).  Any pending or new I/O to
such LUN leads to repeated:

  Done: NEEDS_RETRY Result: hostbyte=DID_IMM_RETRY driverbyte=DRIVER_OK

See also v4.10 commit 6f2ce1c6af37 ("scsi: zfcp: fix rport unblock race
with LUN recovery"). Even a manual LUN recovery
(echo 0 > /sys/bus/scsi/devices/H:C:T:L/zfcp_failed)
does not help, as the LUN links to the old "removed" port which remains
to lack ZFCP_STATUS_COMMON_RUNNING [zfcp_erp_required_act].
The only workaround is to first ensure that the fc_rport is blocked
(e.g. port_remove again in case it was re-discovered by (auto) port scan),
then delete the SCSI devices, and finally re-discover by (auto) port scan.
The port scan includes an fc_rport unblock, which in turn triggers
a new scan on the scsi target to freshly get new pure auto scan LUNs.

Fix this by rejecting port_remove also if there are SCSI devices
(even without any zfcp_unit) under this port. Re-use mechanics from v3.7
commit d99b601b6338 ("[SCSI] zfcp: restore refcount check on port_remove").
However, we have to give up zfcp_sysfs_port_units_mutex earlier in unit_add
to prevent a deadlock with scsi_host scan taking shost->scan_mutex first
and then zfcp_sysfs_port_units_mutex now in our zfcp_scsi_slave_alloc().

Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Fixes: b62a8d9b45b9 ("[SCSI] zfcp: Use SCSI device data zfcp scsi dev instead of zfcp unit")
Fixes: f8210e34887e ("[SCSI] zfcp: Allow midlayer to scan for LUNs when running in NPIV mode")
Cc: <stable@vger.kernel.org> #2.6.37+
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/scsi/zfcp_ext.h   |    1 
 drivers/s390/scsi/zfcp_scsi.c  |    9 ++++++
 drivers/s390/scsi/zfcp_sysfs.c |   54 ++++++++++++++++++++++++++++++++++++-----
 drivers/s390/scsi/zfcp_unit.c  |    8 +++++-
 4 files changed, 65 insertions(+), 7 deletions(-)

--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -161,6 +161,7 @@ extern const struct attribute_group *zfc
 extern struct mutex zfcp_sysfs_port_units_mutex;
 extern struct device_attribute *zfcp_sysfs_sdev_attrs[];
 extern struct device_attribute *zfcp_sysfs_shost_attrs[];
+bool zfcp_sysfs_port_is_removing(const struct zfcp_port *const port);
 
 /* zfcp_unit.c */
 extern int zfcp_unit_add(struct zfcp_port *, u64);
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -125,6 +125,15 @@ static int zfcp_scsi_slave_alloc(struct
 
 	zfcp_sdev->erp_action.port = port;
 
+	mutex_lock(&zfcp_sysfs_port_units_mutex);
+	if (zfcp_sysfs_port_is_removing(port)) {
+		/* port is already gone */
+		mutex_unlock(&zfcp_sysfs_port_units_mutex);
+		put_device(&port->dev); /* undo zfcp_get_port_by_wwpn() */
+		return -ENXIO;
+	}
+	mutex_unlock(&zfcp_sysfs_port_units_mutex);
+
 	unit = zfcp_unit_find(port, zfcp_scsi_dev_lun(sdev));
 	if (unit)
 		put_device(&unit->dev);
--- a/drivers/s390/scsi/zfcp_sysfs.c
+++ b/drivers/s390/scsi/zfcp_sysfs.c
@@ -238,6 +238,53 @@ static ZFCP_DEV_ATTR(adapter, port_resca
 
 DEFINE_MUTEX(zfcp_sysfs_port_units_mutex);
 
+static void zfcp_sysfs_port_set_removing(struct zfcp_port *const port)
+{
+	lockdep_assert_held(&zfcp_sysfs_port_units_mutex);
+	atomic_set(&port->units, -1);
+}
+
+bool zfcp_sysfs_port_is_removing(const struct zfcp_port *const port)
+{
+	lockdep_assert_held(&zfcp_sysfs_port_units_mutex);
+	return atomic_read(&port->units) == -1;
+}
+
+static bool zfcp_sysfs_port_in_use(struct zfcp_port *const port)
+{
+	struct zfcp_adapter *const adapter = port->adapter;
+	unsigned long flags;
+	struct scsi_device *sdev;
+	bool in_use = true;
+
+	mutex_lock(&zfcp_sysfs_port_units_mutex);
+	if (atomic_read(&port->units) > 0)
+		goto unlock_port_units_mutex; /* zfcp_unit(s) under port */
+
+	spin_lock_irqsave(adapter->scsi_host->host_lock, flags);
+	__shost_for_each_device(sdev, adapter->scsi_host) {
+		const struct zfcp_scsi_dev *zsdev = sdev_to_zfcp(sdev);
+
+		if (sdev->sdev_state == SDEV_DEL ||
+		    sdev->sdev_state == SDEV_CANCEL)
+			continue;
+		if (zsdev->port != port)
+			continue;
+		/* alive scsi_device under port of interest */
+		goto unlock_host_lock;
+	}
+
+	/* port is about to be removed, so no more unit_add or slave_alloc */
+	zfcp_sysfs_port_set_removing(port);
+	in_use = false;
+
+unlock_host_lock:
+	spin_unlock_irqrestore(adapter->scsi_host->host_lock, flags);
+unlock_port_units_mutex:
+	mutex_unlock(&zfcp_sysfs_port_units_mutex);
+	return in_use;
+}
+
 static ssize_t zfcp_sysfs_port_remove_store(struct device *dev,
 					    struct device_attribute *attr,
 					    const char *buf, size_t count)
@@ -260,16 +307,11 @@ static ssize_t zfcp_sysfs_port_remove_st
 	else
 		retval = 0;
 
-	mutex_lock(&zfcp_sysfs_port_units_mutex);
-	if (atomic_read(&port->units) > 0) {
+	if (zfcp_sysfs_port_in_use(port)) {
 		retval = -EBUSY;
-		mutex_unlock(&zfcp_sysfs_port_units_mutex);
 		put_device(&port->dev); /* undo zfcp_get_port_by_wwpn() */
 		goto out;
 	}
-	/* port is about to be removed, so no more unit_add */
-	atomic_set(&port->units, -1);
-	mutex_unlock(&zfcp_sysfs_port_units_mutex);
 
 	write_lock_irq(&adapter->port_list_lock);
 	list_del(&port->list);
--- a/drivers/s390/scsi/zfcp_unit.c
+++ b/drivers/s390/scsi/zfcp_unit.c
@@ -124,7 +124,7 @@ int zfcp_unit_add(struct zfcp_port *port
 	int retval = 0;
 
 	mutex_lock(&zfcp_sysfs_port_units_mutex);
-	if (atomic_read(&port->units) == -1) {
+	if (zfcp_sysfs_port_is_removing(port)) {
 		/* port is already gone */
 		retval = -ENODEV;
 		goto out;
@@ -168,8 +168,14 @@ int zfcp_unit_add(struct zfcp_port *port
 	write_lock_irq(&port->unit_list_lock);
 	list_add_tail(&unit->list, &port->unit_list);
 	write_unlock_irq(&port->unit_list_lock);
+	/*
+	 * lock order: shost->scan_mutex before zfcp_sysfs_port_units_mutex
+	 * due to      zfcp_unit_scsi_scan() => zfcp_scsi_slave_alloc()
+	 */
+	mutex_unlock(&zfcp_sysfs_port_units_mutex);
 
 	zfcp_unit_scsi_scan(unit);
+	return retval;
 
 out:
 	mutex_unlock(&zfcp_sysfs_port_units_mutex);

[PATCH 4.14 39/69] Btrfs: fix wrong ctime and mtime of a directory after log replay

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit 5338e43abbab13791144d37fd8846847062351c6 upstream.

When replaying a log that contains a new file or directory name that needs
to be added to its parent directory, we end up updating the mtime and the
ctime of the parent directory to the current time after we have set their
values to the correct ones (set at fsync time), efectivelly losing them.

Sample reproducer:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt

  $ mkdir /mnt/dir
  $ touch /mnt/dir/file

  # fsync of the directory is optional, not needed
  $ xfs_io -c fsync /mnt/dir
  $ xfs_io -c fsync /mnt/dir/file

  $ stat -c %Y /mnt/dir
  1557856079

  <power failure>

  $ sleep 3
  $ mount /dev/sdb /mnt
  $ stat -c %Y /mnt/dir
  1557856082

    --> should have been 1557856079, the mtime is updated to the current
        time when replaying the log

Fix this by not updating the mtime and ctime to the current time at
btrfs_add_link() when we are replaying a log tree.

This could be triggered by my recent fsync fuzz tester for fstests, for
which an fstests patch exists titled "fstests: generic, fsync fuzz tester
with fsstress".

Fixes: e02119d5a7b43 ("Btrfs: Add a write ahead tree log to optimize synchronous operations")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/inode.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -6580,8 +6580,18 @@ int btrfs_add_link(struct btrfs_trans_ha
 	btrfs_i_size_write(parent_inode, parent_inode->vfs_inode.i_size +
 			   name_len * 2);
 	inode_inc_iversion(&parent_inode->vfs_inode);
-	parent_inode->vfs_inode.i_mtime = parent_inode->vfs_inode.i_ctime =
-		current_time(&parent_inode->vfs_inode);
+	/*
+	 * If we are replaying a log tree, we do not want to update the mtime
+	 * and ctime of the parent directory with the current time, since the
+	 * log replay procedure is responsible for setting them to their correct
+	 * values (the ones it had when the fsync was done).
+	 */
+	if (!test_bit(BTRFS_FS_LOG_RECOVERING, &root->fs_info->flags)) {
+		struct timespec64 now = current_time(&parent_inode->vfs_inode);
+
+		parent_inode->vfs_inode.i_mtime = now;
+		parent_inode->vfs_inode.i_ctime = now;
+	}
 	ret = btrfs_update_inode(trans, root, &parent_inode->vfs_inode);
 	if (ret)
 		btrfs_abort_transaction(trans, ret);

[PATCH 4.14 40/69] Btrfs: fix race updating log root item during fsync

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit 06989c799f04810f6876900d4760c0edda369cf7 upstream.

When syncing the log, the final phase of a fsync operation, we need to
either create a log root's item or update the existing item in the log
tree of log roots, and that depends on the current value of the log
root's log_transid - if it's 1 we need to create the log root item,
otherwise it must exist already and we update it. Since there is no
synchronization between updating the log_transid and checking it for
deciding whether the log root's item needs to be created or updated, we
end up with a tiny race window that results in attempts to update the
item to fail because the item was not yet created:

              CPU 1                                    CPU 2

  btrfs_sync_log()

    lock root->log_mutex

    set log root's log_transid to 1

    unlock root->log_mutex

                                               btrfs_sync_log()

                                                 lock root->log_mutex

                                                 sets log root's
                                                 log_transid to 2

                                                 unlock root->log_mutex

    update_log_root()

      sees log root's log_transid
      with a value of 2

        calls btrfs_update_root(),
        which fails with -EUCLEAN
        and causes transaction abort

Until recently the race lead to a BUG_ON at btrfs_update_root(), but after
the recent commit 7ac1e464c4d47 ("btrfs: Don't panic when we can't find a
root key") we just abort the current transaction.

A sample trace of the BUG_ON() on a SLE12 kernel:

  ------------[ cut here ]------------
  kernel BUG at ../fs/btrfs/root-tree.c:157!
  Oops: Exception in kernel mode, sig: 5 [#1]
  SMP NR_CPUS=2048 NUMA pSeries
  (...)
  Supported: Yes, External
  CPU: 78 PID: 76303 Comm: rtas_errd Tainted: G                 X 4.4.156-94.57-default #1
  task: c00000ffa906d010 ti: c00000ff42b08000 task.ti: c00000ff42b08000
  NIP: d000000036ae5cdc LR: d000000036ae5cd8 CTR: 0000000000000000
  REGS: c00000ff42b0b860 TRAP: 0700   Tainted: G                 X  (4.4.156-94.57-default)
  MSR: 8000000002029033 <SF,VEC,EE,ME,IR,DR,RI,LE>  CR: 22444484  XER: 20000000
  CFAR: d000000036aba66c SOFTE: 1
  GPR00: d000000036ae5cd8 c00000ff42b0bae0 d000000036bda220 0000000000000054
  GPR04: 0000000000000001 0000000000000000 c00007ffff8d37c8 0000000000000000
  GPR08: c000000000e19c00 0000000000000000 0000000000000000 3736343438312079
  GPR12: 3930373337303434 c000000007a3a800 00000000007fffff 0000000000000023
  GPR16: c00000ffa9d26028 c00000ffa9d261f8 0000000000000010 c00000ffa9d2ab28
  GPR20: c00000ff42b0bc48 0000000000000001 c00000ff9f0d9888 0000000000000001
  GPR24: c00000ffa9d26000 c00000ffa9d261e8 c00000ffa9d2a800 c00000ff9f0d9888
  GPR28: c00000ffa9d26028 c00000ffa9d2aa98 0000000000000001 c00000ffa98f5b20
  NIP [d000000036ae5cdc] btrfs_update_root+0x25c/0x4e0 [btrfs]
  LR [d000000036ae5cd8] btrfs_update_root+0x258/0x4e0 [btrfs]
  Call Trace:
  [c00000ff42b0bae0] [d000000036ae5cd8] btrfs_update_root+0x258/0x4e0 [btrfs] (unreliable)
  [c00000ff42b0bba0] [d000000036b53610] btrfs_sync_log+0x2d0/0xc60 [btrfs]
  [c00000ff42b0bce0] [d000000036b1785c] btrfs_sync_file+0x44c/0x4e0 [btrfs]
  [c00000ff42b0bd80] [c00000000032e300] vfs_fsync_range+0x70/0x120
  [c00000ff42b0bdd0] [c00000000032e44c] do_fsync+0x5c/0xb0
  [c00000ff42b0be10] [c00000000032e8dc] SyS_fdatasync+0x2c/0x40
  [c00000ff42b0be30] [c000000000009488] system_call+0x3c/0x100
  Instruction dump:
  7f43d378 4bffebb9 60000000 88d90008 3d220000 e8b90000 3b390009 e87a01f0
  e8898e08 e8f90000 4bfd48e5 60000000 <0fe00000> e95b0060 39200004 394a0ea0
  ---[ end trace 8f2dc8f919cabab8 ]---

So fix this by doing the check of log_transid and updating or creating the
log root's item while holding the root's log_mutex.

Fixes: 7237f1833601d ("Btrfs: fix tree logs parallel sync")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/tree-log.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2907,6 +2907,12 @@ int btrfs_sync_log(struct btrfs_trans_ha
 	log->log_transid = root->log_transid;
 	root->log_start_pid = 0;
 	/*
+	 * Update or create log root item under the root's log_mutex to prevent
+	 * races with concurrent log syncs that can lead to failure to update
+	 * log root item because it was not created yet.
+	 */
+	ret = update_log_root(trans, log);
+	/*
 	 * IO has been started, blocks of the log tree have WRITTEN flag set
 	 * in their headers. new modifications of the log will be written to
 	 * new positions. so it's safe to allow log writers to go in.
@@ -2925,8 +2931,6 @@ int btrfs_sync_log(struct btrfs_trans_ha
 
 	mutex_unlock(&log_root_tree->log_mutex);
 
-	ret = update_log_root(trans, log);
-
 	mutex_lock(&log_root_tree->log_mutex);
 	if (atomic_dec_and_test(&log_root_tree->log_writers)) {
 		/*

[PATCH 4.14 41/69] Btrfs: fix fsync not persisting changed attributes of a directory

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit 60d9f50308e5df19bc18c2fefab0eba4a843900a upstream.

While logging an inode we follow its ancestors and for each one we mark
it as logged in the current transaction, even if we have not logged it.
As a consequence if we change an attribute of an ancestor, such as the
UID or GID for example, and then explicitly fsync it, we end up not
logging the inode at all despite returning success to user space, which
results in the attribute being lost if a power failure happens after
the fsync.

Sample reproducer:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt

  $ mkdir /mnt/dir
  $ chown 6007:6007 /mnt/dir

  $ sync

  $ chown 9003:9003 /mnt/dir
  $ touch /mnt/dir/file
  $ xfs_io -c fsync /mnt/dir/file

  # fsync our directory after fsync'ing the new file, should persist the
  # new values for the uid and gid.
  $ xfs_io -c fsync /mnt/dir

  <power failure>

  $ mount /dev/sdb /mnt
  $ stat -c %u:%g /mnt/dir
  6007:6007

    --> should be 9003:9003, the uid and gid were not persisted, despite
        the explicit fsync on the directory prior to the power failure

Fix this by not updating the logged_trans field of ancestor inodes when
logging an inode, since we have not logged them. Let only future calls to
btrfs_log_inode() to mark inodes as logged.

This could be triggered by my recent fsync fuzz tester for fstests, for
which an fstests patch exists titled "fstests: generic, fsync fuzz tester
with fsstress".

Fixes: 12fcfd22fe5b ("Btrfs: tree logging unlink/rename fixes")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/tree-log.c |   12 ------------
 1 file changed, 12 deletions(-)

--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -5332,7 +5332,6 @@ static noinline int check_parent_dirs_fo
 {
 	int ret = 0;
 	struct dentry *old_parent = NULL;
-	struct btrfs_inode *orig_inode = inode;
 
 	/*
 	 * for regular files, if its inode is already on disk, we don't
@@ -5352,16 +5351,6 @@ static noinline int check_parent_dirs_fo
 	}
 
 	while (1) {
-		/*
-		 * If we are logging a directory then we start with our inode,
-		 * not our parent's inode, so we need to skip setting the
-		 * logged_trans so that further down in the log code we don't
-		 * think this inode has already been logged.
-		 */
-		if (inode != orig_inode)
-			inode->logged_trans = trans->transid;
-		smp_mb();
-
 		if (btrfs_must_commit_transaction(trans, inode)) {
 			ret = 1;
 			break;
@@ -6091,7 +6080,6 @@ void btrfs_record_unlink_dir(struct btrf
 	 * if this directory was already logged any new
 	 * names for this file/dir will get recorded
 	 */
-	smp_mb();
 	if (dir->logged_trans == trans->transid)
 		return;
 

[PATCH 4.14 42/69] Btrfs: incremental send, fix file corruption when no-holes feature is enabled

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit 6b1f72e5b82a5c2a4da4d1ebb8cc01913ddbea21 upstream.

When using the no-holes feature, if we have a file with prealloc extents
with a start offset beyond the file's eof, doing an incremental send can
cause corruption of the file due to incorrect hole detection. Such case
requires that the prealloc extent(s) exist in both the parent and send
snapshots, and that a hole is punched into the file that covers all its
extents that do not cross the eof boundary.

Example reproducer:

  $ mkfs.btrfs -f -O no-holes /dev/sdb
  $ mount /dev/sdb /mnt/sdb

  $ xfs_io -f -c "pwrite -S 0xab 0 500K" /mnt/sdb/foobar
  $ xfs_io -c "falloc -k 1200K 800K" /mnt/sdb/foobar

  $ btrfs subvolume snapshot -r /mnt/sdb /mnt/sdb/base

  $ btrfs send -f /tmp/base.snap /mnt/sdb/base

  $ xfs_io -c "fpunch 0 500K" /mnt/sdb/foobar

  $ btrfs subvolume snapshot -r /mnt/sdb /mnt/sdb/incr

  $ btrfs send -p /mnt/sdb/base -f /tmp/incr.snap /mnt/sdb/incr

  $ md5sum /mnt/sdb/incr/foobar
  816df6f64deba63b029ca19d880ee10a   /mnt/sdb/incr/foobar

  $ mkfs.btrfs -f /dev/sdc
  $ mount /dev/sdc /mnt/sdc

  $ btrfs receive -f /tmp/base.snap /mnt/sdc
  $ btrfs receive -f /tmp/incr.snap /mnt/sdc

  $ md5sum /mnt/sdc/incr/foobar
  cf2ef71f4a9e90c2f6013ba3b2257ed2   /mnt/sdc/incr/foobar

    --> Different checksum, because the prealloc extent beyond the
        file's eof confused the hole detection code and it assumed
        a hole starting at offset 0 and ending at the offset of the
        prealloc extent (1200Kb) instead of ending at the offset
        500Kb (the file's size).

Fix this by ensuring we never cross the file's size when issuing the
write operations for a hole.

Fixes: 16e7549f045d33 ("Btrfs: incompatible format change to remove hole extents")
CC: stable@vger.kernel.org # 3.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/send.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -5013,6 +5013,12 @@ static int send_hole(struct send_ctx *sc
 	u64 len;
 	int ret = 0;
 
+	/*
+	 * Don't go beyond the inode's i_size due to prealloc extents that start
+	 * after the i_size.
+	 */
+	end = min_t(u64, end, sctx->cur_inode_size);
+
 	if (sctx->flags & BTRFS_SEND_FLAG_NO_FILE_DATA)
 		return send_update_extent(sctx, offset, end - offset);
 

[PATCH 4.14 43/69] KVM: PPC: Book3S HV: XIVE: Do not clear IRQ data of passthrough interrupts

[Greg Kroah-Hartman]

From: Cédric Le Goater <clg@kaod.org>

commit ef9740204051d0e00f5402fe96cf3a43ddd2bbbf upstream.

The passthrough interrupts are defined at the host level and their IRQ
data should not be cleared unless specifically deconfigured (shutdown)
by the host. They differ from the IPI interrupts which are allocated
by the XIVE KVM device and reserved to the guest usage only.

This fixes a host crash when destroying a VM in which a PCI adapter
was passed-through. In this case, the interrupt is cleared and freed
by the KVM device and then shutdown by vfio at the host level.

[ 1007.360265] BUG: Kernel NULL pointer dereference at 0x00000d00
[ 1007.360285] Faulting instruction address: 0xc00000000009da34
[ 1007.360296] Oops: Kernel access of bad area, sig: 7 [#1]
[ 1007.360303] LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV
[ 1007.360314] Modules linked in: vhost_net vhost iptable_mangle ipt_MASQUERADE iptable_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 tun bridge stp llc kvm_hv kvm xt_tcpudp iptable_filter squashfs fuse binfmt_misc vmx_crypto ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi nfsd ip_tables x_tables autofs4 btrfs zstd_decompress zstd_compress lzo_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq multipath mlx5_ib ib_uverbs ib_core crc32c_vpmsum mlx5_core
[ 1007.360425] CPU: 9 PID: 15576 Comm: CPU 18/KVM Kdump: loaded Not tainted 5.1.0-gad7e7d0ef #4
[ 1007.360454] NIP:  c00000000009da34 LR: c00000000009e50c CTR: c00000000009e5d0
[ 1007.360482] REGS: c000007f24ccf330 TRAP: 0300   Not tainted  (5.1.0-gad7e7d0ef)
[ 1007.360500] MSR:  900000000280b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE>  CR: 24002484  XER: 00000000
[ 1007.360532] CFAR: c00000000009da10 DAR: 0000000000000d00 DSISR: 00080000 IRQMASK: 1
[ 1007.360532] GPR00: c00000000009e62c c000007f24ccf5c0 c000000001510600 c000007fe7f947c0
[ 1007.360532] GPR04: 0000000000000d00 0000000000000000 0000000000000000 c000005eff02d200
[ 1007.360532] GPR08: 0000000000400000 0000000000000000 0000000000000000 fffffffffffffffd
[ 1007.360532] GPR12: c00000000009e5d0 c000007fffff7b00 0000000000000031 000000012c345718
[ 1007.360532] GPR16: 0000000000000000 0000000000000008 0000000000418004 0000000000040100
[ 1007.360532] GPR20: 0000000000000000 0000000008430000 00000000003c0000 0000000000000027
[ 1007.360532] GPR24: 00000000000000ff 0000000000000000 00000000000000ff c000007faa90d98c
[ 1007.360532] GPR28: c000007faa90da40 00000000000fe040 ffffffffffffffff c000007fe7f947c0
[ 1007.360689] NIP [c00000000009da34] xive_esb_read+0x34/0x120
[ 1007.360706] LR [c00000000009e50c] xive_do_source_set_mask.part.0+0x2c/0x50
[ 1007.360732] Call Trace:
[ 1007.360738] [c000007f24ccf5c0] [c000000000a6383c] snooze_loop+0x15c/0x270 (unreliable)
[ 1007.360775] [c000007f24ccf5f0] [c00000000009e62c] xive_irq_shutdown+0x5c/0xe0
[ 1007.360795] [c000007f24ccf630] [c00000000019e4a0] irq_shutdown+0x60/0xe0
[ 1007.360813] [c000007f24ccf660] [c000000000198c44] __free_irq+0x3a4/0x420
[ 1007.360831] [c000007f24ccf700] [c000000000198dc8] free_irq+0x78/0xe0
[ 1007.360849] [c000007f24ccf730] [c00000000096c5a8] vfio_msi_set_vector_signal+0xa8/0x350
[ 1007.360878] [c000007f24ccf7f0] [c00000000096c938] vfio_msi_set_block+0xe8/0x1e0
[ 1007.360899] [c000007f24ccf850] [c00000000096cae0] vfio_msi_disable+0xb0/0x110
[ 1007.360912] [c000007f24ccf8a0] [c00000000096cd04] vfio_pci_set_msi_trigger+0x1c4/0x3d0
[ 1007.360922] [c000007f24ccf910] [c00000000096d910] vfio_pci_set_irqs_ioctl+0xa0/0x170
[ 1007.360941] [c000007f24ccf930] [c00000000096b400] vfio_pci_disable+0x80/0x5e0
[ 1007.360963] [c000007f24ccfa10] [c00000000096b9bc] vfio_pci_release+0x5c/0x90
[ 1007.360991] [c000007f24ccfa40] [c000000000963a9c] vfio_device_fops_release+0x3c/0x70
[ 1007.361012] [c000007f24ccfa70] [c0000000003b5668] __fput+0xc8/0x2b0
[ 1007.361040] [c000007f24ccfac0] [c0000000001409b0] task_work_run+0x140/0x1b0
[ 1007.361059] [c000007f24ccfb20] [c000000000118f8c] do_exit+0x3ac/0xd00
[ 1007.361076] [c000007f24ccfc00] [c0000000001199b0] do_group_exit+0x60/0x100
[ 1007.361094] [c000007f24ccfc40] [c00000000012b514] get_signal+0x1a4/0x8f0
[ 1007.361112] [c000007f24ccfd30] [c000000000021cc8] do_notify_resume+0x1a8/0x430
[ 1007.361141] [c000007f24ccfe20] [c00000000000e444] ret_from_except_lite+0x70/0x74
[ 1007.361159] Instruction dump:
[ 1007.361175] 38422c00 e9230000 712a0004 41820010 548a2036 7d442378 78840020 71290020
[ 1007.361194] 4082004c e9230010 7c892214 7c0004ac <e9240000> 0c090000 4c00012c 792a0022

Cc: stable@vger.kernel.org # v4.12+
Fixes: 5af50993850a ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kvm/book3s_xive.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/powerpc/kvm/book3s_xive.c
+++ b/arch/powerpc/kvm/book3s_xive.c
@@ -1675,7 +1675,6 @@ static void kvmppc_xive_cleanup_irq(u32
 {
 	xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_01);
 	xive_native_configure_irq(hw_num, 0, MASKED, 0);
-	xive_cleanup_irq_data(xd);
 }
 
 static void kvmppc_xive_free_sources(struct kvmppc_xive_src_block *sb)
@@ -1689,9 +1688,10 @@ static void kvmppc_xive_free_sources(str
 			continue;
 
 		kvmppc_xive_cleanup_irq(state->ipi_number, &state->ipi_data);
+		xive_cleanup_irq_data(&state->ipi_data);
 		xive_native_free_irq(state->ipi_number);
 
-		/* Pass-through, cleanup too */
+		/* Pass-through, cleanup too but keep IRQ hw data */
 		if (state->pt_number)
 			kvmppc_xive_cleanup_irq(state->pt_number, state->pt_data);
 

[PATCH 4.14 44/69] powerpc/perf: Fix MMCRA corruption by bhrb_filter

[Greg Kroah-Hartman]

From: Ravi Bangoria <ravi.bangoria@linux.ibm.com>

commit 3202e35ec1c8fc19cea24253ff83edf702a60a02 upstream.

Consider a scenario where user creates two events:

  1st event:
    attr.sample_type |= PERF_SAMPLE_BRANCH_STACK;
    attr.branch_sample_type = PERF_SAMPLE_BRANCH_ANY;
    fd = perf_event_open(attr, 0, 1, -1, 0);

  This sets cpuhw->bhrb_filter to 0 and returns valid fd.

  2nd event:
    attr.sample_type |= PERF_SAMPLE_BRANCH_STACK;
    attr.branch_sample_type = PERF_SAMPLE_BRANCH_CALL;
    fd = perf_event_open(attr, 0, 1, -1, 0);

  It overrides cpuhw->bhrb_filter to -1 and returns with error.

Now if power_pmu_enable() gets called by any path other than
power_pmu_add(), ppmu->config_bhrb(-1) will set MMCRA to -1.

Fixes: 3925f46bb590 ("powerpc/perf: Enable branch stack sampling framework")
Cc: stable@vger.kernel.org # v3.10+
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/perf/core-book3s.c |    6 ++++--
 arch/powerpc/perf/power8-pmu.c  |    3 +++
 arch/powerpc/perf/power9-pmu.c  |    3 +++
 3 files changed, 10 insertions(+), 2 deletions(-)

--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -1845,6 +1845,7 @@ static int power_pmu_event_init(struct p
 	int n;
 	int err;
 	struct cpu_hw_events *cpuhw;
+	u64 bhrb_filter;
 
 	if (!ppmu)
 		return -ENOENT;
@@ -1941,13 +1942,14 @@ static int power_pmu_event_init(struct p
 	err = power_check_constraints(cpuhw, events, cflags, n + 1);
 
 	if (has_branch_stack(event)) {
-		cpuhw->bhrb_filter = ppmu->bhrb_filter_map(
+		bhrb_filter = ppmu->bhrb_filter_map(
 					event->attr.branch_sample_type);
 
-		if (cpuhw->bhrb_filter == -1) {
+		if (bhrb_filter == -1) {
 			put_cpu_var(cpu_hw_events);
 			return -EOPNOTSUPP;
 		}
+		cpuhw->bhrb_filter = bhrb_filter;
 	}
 
 	put_cpu_var(cpu_hw_events);
--- a/arch/powerpc/perf/power8-pmu.c
+++ b/arch/powerpc/perf/power8-pmu.c
@@ -29,6 +29,7 @@ enum {
 #define	POWER8_MMCRA_IFM1		0x0000000040000000UL
 #define	POWER8_MMCRA_IFM2		0x0000000080000000UL
 #define	POWER8_MMCRA_IFM3		0x00000000C0000000UL
+#define	POWER8_MMCRA_BHRB_MASK		0x00000000C0000000UL
 
 /* PowerISA v2.07 format attribute structure*/
 extern struct attribute_group isa207_pmu_format_group;
@@ -179,6 +180,8 @@ static u64 power8_bhrb_filter_map(u64 br
 
 static void power8_config_bhrb(u64 pmu_bhrb_filter)
 {
+	pmu_bhrb_filter &= POWER8_MMCRA_BHRB_MASK;
+
 	/* Enable BHRB filter in PMU */
 	mtspr(SPRN_MMCRA, (mfspr(SPRN_MMCRA) | pmu_bhrb_filter));
 }
--- a/arch/powerpc/perf/power9-pmu.c
+++ b/arch/powerpc/perf/power9-pmu.c
@@ -100,6 +100,7 @@ enum {
 #define POWER9_MMCRA_IFM1		0x0000000040000000UL
 #define POWER9_MMCRA_IFM2		0x0000000080000000UL
 #define POWER9_MMCRA_IFM3		0x00000000C0000000UL
+#define POWER9_MMCRA_BHRB_MASK		0x00000000C0000000UL
 
 /* PowerISA v2.07 format attribute structure*/
 extern struct attribute_group isa207_pmu_format_group;
@@ -289,6 +290,8 @@ static u64 power9_bhrb_filter_map(u64 br
 
 static void power9_config_bhrb(u64 pmu_bhrb_filter)
 {
+	pmu_bhrb_filter &= POWER9_MMCRA_BHRB_MASK;
+
 	/* Enable BHRB filter in PMU */
 	mtspr(SPRN_MMCRA, (mfspr(SPRN_MMCRA) | pmu_bhrb_filter));
 }

[PATCH 4.14 45/69] ALSA: hda/realtek - Set default power save node to 0

[Greg Kroah-Hartman]

From: Kailang Yang <kailang@realtek.com>

commit 317d9313925cd8388304286c0d3c8dda7f060a2d upstream.

I measured power consumption between power_save_node=1 and power_save_node=0.
It's almost the same.
Codec will enter to runtime suspend and suspend.
That pin also will enter to D3. Don't need to enter to D3 by single pin.
So, Disable power_save_node as default. It will avoid more issues.
Windows Driver also has not this option at runtime PM.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7078,7 +7078,7 @@ static int patch_alc269(struct hda_codec
 
 	spec = codec->spec;
 	spec->gen.shared_mic_vref_pin = 0x18;
-	codec->power_save_node = 1;
+	codec->power_save_node = 0;
 
 #ifdef CONFIG_PM
 	codec->patch_ops.suspend = alc269_suspend;

[PATCH 4.14 46/69] KVM: s390: Do not report unusabled IDs via KVM_CAP_MAX_VCPU_ID

[Greg Kroah-Hartman]

From: Thomas Huth <thuth@redhat.com>

commit a86cb413f4bf273a9d341a3ab2c2ca44e12eb317 upstream.

KVM_CAP_MAX_VCPU_ID is currently always reporting KVM_MAX_VCPU_ID on all
architectures. However, on s390x, the amount of usable CPUs is determined
during runtime - it is depending on the features of the machine the code
is running on. Since we are using the vcpu_id as an index into the SCA
structures that are defined by the hardware (see e.g. the sca_add_vcpu()
function), it is not only the amount of CPUs that is limited by the hard-
ware, but also the range of IDs that we can use.
Thus KVM_CAP_MAX_VCPU_ID must be determined during runtime on s390x, too.
So the handling of KVM_CAP_MAX_VCPU_ID has to be moved from the common
code into the architecture specific code, and on s390x we have to return
the same value here as for KVM_CAP_MAX_VCPUS.
This problem has been discovered with the kvm_create_max_vcpus selftest.
With this change applied, the selftest now passes on s390x, too.

Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190523164309.13345-9-thuth@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 arch/mips/kvm/mips.c       |    3 +++
 arch/powerpc/kvm/powerpc.c |    3 +++
 arch/s390/kvm/kvm-s390.c   |    1 +
 arch/x86/kvm/x86.c         |    3 +++
 virt/kvm/arm/arm.c         |    3 +++
 virt/kvm/kvm_main.c        |    2 --
 6 files changed, 13 insertions(+), 2 deletions(-)

--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -1078,6 +1078,9 @@ int kvm_vm_ioctl_check_extension(struct
 	case KVM_CAP_MAX_VCPUS:
 		r = KVM_MAX_VCPUS;
 		break;
+	case KVM_CAP_MAX_VCPU_ID:
+		r = KVM_MAX_VCPU_ID;
+		break;
 	case KVM_CAP_MIPS_FPU:
 		/* We don't handle systems with inconsistent cpu_has_fpu */
 		r = !!raw_cpu_has_fpu;
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -629,6 +629,9 @@ int kvm_vm_ioctl_check_extension(struct
 	case KVM_CAP_MAX_VCPUS:
 		r = KVM_MAX_VCPUS;
 		break;
+	case KVM_CAP_MAX_VCPU_ID:
+		r = KVM_MAX_VCPU_ID;
+		break;
 #ifdef CONFIG_PPC_BOOK3S_64
 	case KVM_CAP_PPC_GET_SMMU_INFO:
 		r = 1;
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -428,6 +428,7 @@ int kvm_vm_ioctl_check_extension(struct
 		break;
 	case KVM_CAP_NR_VCPUS:
 	case KVM_CAP_MAX_VCPUS:
+	case KVM_CAP_MAX_VCPU_ID:
 		r = KVM_S390_BSCA_CPU_SLOTS;
 		if (!kvm_s390_use_sca_entries())
 			r = KVM_MAX_VCPUS;
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2825,6 +2825,9 @@ int kvm_vm_ioctl_check_extension(struct
 	case KVM_CAP_MAX_VCPUS:
 		r = KVM_MAX_VCPUS;
 		break;
+	case KVM_CAP_MAX_VCPU_ID:
+		r = KVM_MAX_VCPU_ID;
+		break;
 	case KVM_CAP_NR_MEMSLOTS:
 		r = KVM_USER_MEM_SLOTS;
 		break;
--- a/virt/kvm/arm/arm.c
+++ b/virt/kvm/arm/arm.c
@@ -217,6 +217,9 @@ int kvm_vm_ioctl_check_extension(struct
 	case KVM_CAP_MAX_VCPUS:
 		r = KVM_MAX_VCPUS;
 		break;
+	case KVM_CAP_MAX_VCPU_ID:
+		r = KVM_MAX_VCPU_ID;
+		break;
 	case KVM_CAP_NR_MEMSLOTS:
 		r = KVM_USER_MEM_SLOTS;
 		break;
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -2964,8 +2964,6 @@ static long kvm_vm_ioctl_check_extension
 	case KVM_CAP_MULTI_ADDRESS_SPACE:
 		return KVM_ADDRESS_SPACE_NUM;
 #endif
-	case KVM_CAP_MAX_VCPU_ID:
-		return KVM_MAX_VCPU_ID;
 	default:
 		break;
 	}

[PATCH 4.14 47/69] drm/nouveau/i2c: Disable i2c bus access after ->fini()

[Greg Kroah-Hartman]

From: Lyude Paul <lyude@redhat.com>

commit 342406e4fbba9a174125fbfe6aeac3d64ef90f76 upstream.

For a while, we've had the problem of i2c bus access not grabbing
a runtime PM ref when it's being used in userspace by i2c-dev, resulting
in nouveau spamming the kernel log with errors if anything attempts to
access the i2c bus while the GPU is in runtime suspend. An example:

[  130.078386] nouveau 0000:01:00.0: i2c: aux 000d: begin idle timeout ffffffff

Since the GPU is in runtime suspend, the MMIO region that the i2c bus is
on isn't accessible. On x86, the standard behavior for accessing an
unavailable MMIO region is to just return ~0.

Except, that turned out to be a lie. While computers with a clean
concious will return ~0 in this scenario, some machines will actually
completely hang a CPU on certian bad MMIO accesses. This was witnessed
with someone's Lenovo ThinkPad P50, where sensors-detect attempting to
access the i2c bus while the GPU was suspended would result in a CPU
hang:

  CPU: 5 PID: 12438 Comm: sensors-detect Not tainted 5.0.0-0.rc4.git3.1.fc30.x86_64 #1
  Hardware name: LENOVO 20EQS64N17/20EQS64N17, BIOS N1EET74W (1.47 ) 11/21/2017
  RIP: 0010:ioread32+0x2b/0x30
  Code: 81 ff ff ff 03 00 77 20 48 81 ff 00 00 01 00 76 05 0f b7 d7 ed c3
  48 c7 c6 e1 0c 36 96 e8 2d ff ff ff b8 ff ff ff ff c3 8b 07 <c3> 0f 1f
  40 00 49 89 f0 48 81 fe ff ff 03 00 76 04 40 88 3e c3 48
  RSP: 0018:ffffaac3c5007b48 EFLAGS: 00000292 ORIG_RAX: ffffffffffffff13
  RAX: 0000000001111000 RBX: 0000000001111000 RCX: 0000043017a97186
  RDX: 0000000000000aaa RSI: 0000000000000005 RDI: ffffaac3c400e4e4
  RBP: ffff9e6443902c00 R08: ffffaac3c400e4e4 R09: ffffaac3c5007be7
  R10: 0000000000000004 R11: 0000000000000001 R12: ffff9e6445dd0000
  R13: 000000000000e4e4 R14: 00000000000003c4 R15: 0000000000000000
  FS:  00007f253155a740(0000) GS:ffff9e644f600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00005630d1500358 CR3: 0000000417c44006 CR4: 00000000003606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   g94_i2c_aux_xfer+0x326/0x850 [nouveau]
   nvkm_i2c_aux_i2c_xfer+0x9e/0x140 [nouveau]
   __i2c_transfer+0x14b/0x620
   i2c_smbus_xfer_emulated+0x159/0x680
   ? _raw_spin_unlock_irqrestore+0x1/0x60
   ? rt_mutex_slowlock.constprop.0+0x13d/0x1e0
   ? __lock_is_held+0x59/0xa0
   __i2c_smbus_xfer+0x138/0x5a0
   i2c_smbus_xfer+0x4f/0x80
   i2cdev_ioctl_smbus+0x162/0x2d0 [i2c_dev]
   i2cdev_ioctl+0x1db/0x2c0 [i2c_dev]
   do_vfs_ioctl+0x408/0x750
   ksys_ioctl+0x5e/0x90
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x60/0x1e0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7f25317f546b
  Code: 0f 1e fa 48 8b 05 1d da 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff
  ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01
  f0 ff ff 73 01 c3 48 8b 0d ed d9 0c 00 f7 d8 64 89 01 48
  RSP: 002b:00007ffc88caab68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 00005630d0fe7260 RCX: 00007f25317f546b
  RDX: 00005630d1598e80 RSI: 0000000000000720 RDI: 0000000000000003
  RBP: 00005630d155b968 R08: 0000000000000001 R09: 00005630d15a1da0
  R10: 0000000000000070 R11: 0000000000000246 R12: 00005630d1598e80
  R13: 00005630d12f3d28 R14: 0000000000000720 R15: 00005630d12f3ce0
  watchdog: BUG: soft lockup - CPU#5 stuck for 23s! [sensors-detect:12438]

Yikes! While I wanted to try to make it so that accessing an i2c bus on
nouveau would wake up the GPU as needed, airlied pointed out that pretty
much any usecase for userspace accessing an i2c bus on a GPU (mainly for
the DDC brightness control that some displays have) is going to only be
useful while there's at least one display enabled on the GPU anyway, and
the GPU never sleeps while there's displays running.

Since teaching the i2c bus to wake up the GPU on userspace accesses is a
good deal more difficult than it might seem, mostly due to the fact that
we have to use the i2c bus during runtime resume of the GPU, we instead
opt for the easiest solution: don't let userspace access i2c busses on
the GPU at all while it's in runtime suspend.

Changes since v1:
* Also disable i2c busses that run over DP AUX

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/nouveau/include/nvkm/subdev/i2c.h |    2 +
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/aux.c     |   26 +++++++++++++++++++++-
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/aux.h     |    2 +
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/base.c    |   15 ++++++++++++
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/bus.c     |   21 ++++++++++++++++-
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/bus.h     |    1 
 6 files changed, 65 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/nouveau/include/nvkm/subdev/i2c.h
+++ b/drivers/gpu/drm/nouveau/include/nvkm/subdev/i2c.h
@@ -38,6 +38,7 @@ struct nvkm_i2c_bus {
 	struct mutex mutex;
 	struct list_head head;
 	struct i2c_adapter i2c;
+	u8 enabled;
 };
 
 int nvkm_i2c_bus_acquire(struct nvkm_i2c_bus *);
@@ -57,6 +58,7 @@ struct nvkm_i2c_aux {
 	struct mutex mutex;
 	struct list_head head;
 	struct i2c_adapter i2c;
+	u8 enabled;
 
 	u32 intr;
 };
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/aux.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/aux.c
@@ -105,9 +105,15 @@ nvkm_i2c_aux_acquire(struct nvkm_i2c_aux
 {
 	struct nvkm_i2c_pad *pad = aux->pad;
 	int ret;
+
 	AUX_TRACE(aux, "acquire");
 	mutex_lock(&aux->mutex);
-	ret = nvkm_i2c_pad_acquire(pad, NVKM_I2C_PAD_AUX);
+
+	if (aux->enabled)
+		ret = nvkm_i2c_pad_acquire(pad, NVKM_I2C_PAD_AUX);
+	else
+		ret = -EIO;
+
 	if (ret)
 		mutex_unlock(&aux->mutex);
 	return ret;
@@ -145,6 +151,24 @@ nvkm_i2c_aux_del(struct nvkm_i2c_aux **p
 	}
 }
 
+void
+nvkm_i2c_aux_init(struct nvkm_i2c_aux *aux)
+{
+	AUX_TRACE(aux, "init");
+	mutex_lock(&aux->mutex);
+	aux->enabled = true;
+	mutex_unlock(&aux->mutex);
+}
+
+void
+nvkm_i2c_aux_fini(struct nvkm_i2c_aux *aux)
+{
+	AUX_TRACE(aux, "fini");
+	mutex_lock(&aux->mutex);
+	aux->enabled = false;
+	mutex_unlock(&aux->mutex);
+}
+
 int
 nvkm_i2c_aux_ctor(const struct nvkm_i2c_aux_func *func,
 		  struct nvkm_i2c_pad *pad, int id,
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/aux.h
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/aux.h
@@ -16,6 +16,8 @@ int nvkm_i2c_aux_ctor(const struct nvkm_
 int nvkm_i2c_aux_new_(const struct nvkm_i2c_aux_func *, struct nvkm_i2c_pad *,
 		      int id, struct nvkm_i2c_aux **);
 void nvkm_i2c_aux_del(struct nvkm_i2c_aux **);
+void nvkm_i2c_aux_init(struct nvkm_i2c_aux *);
+void nvkm_i2c_aux_fini(struct nvkm_i2c_aux *);
 int nvkm_i2c_aux_xfer(struct nvkm_i2c_aux *, bool retry, u8 type,
 		      u32 addr, u8 *data, u8 *size);
 
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/base.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/base.c
@@ -160,8 +160,18 @@ nvkm_i2c_fini(struct nvkm_subdev *subdev
 {
 	struct nvkm_i2c *i2c = nvkm_i2c(subdev);
 	struct nvkm_i2c_pad *pad;
+	struct nvkm_i2c_bus *bus;
+	struct nvkm_i2c_aux *aux;
 	u32 mask;
 
+	list_for_each_entry(aux, &i2c->aux, head) {
+		nvkm_i2c_aux_fini(aux);
+	}
+
+	list_for_each_entry(bus, &i2c->bus, head) {
+		nvkm_i2c_bus_fini(bus);
+	}
+
 	if ((mask = (1 << i2c->func->aux) - 1), i2c->func->aux_stat) {
 		i2c->func->aux_mask(i2c, NVKM_I2C_ANY, mask, 0);
 		i2c->func->aux_stat(i2c, &mask, &mask, &mask, &mask);
@@ -180,6 +190,7 @@ nvkm_i2c_init(struct nvkm_subdev *subdev
 	struct nvkm_i2c *i2c = nvkm_i2c(subdev);
 	struct nvkm_i2c_bus *bus;
 	struct nvkm_i2c_pad *pad;
+	struct nvkm_i2c_aux *aux;
 
 	list_for_each_entry(pad, &i2c->pad, head) {
 		nvkm_i2c_pad_init(pad);
@@ -189,6 +200,10 @@ nvkm_i2c_init(struct nvkm_subdev *subdev
 		nvkm_i2c_bus_init(bus);
 	}
 
+	list_for_each_entry(aux, &i2c->aux, head) {
+		nvkm_i2c_aux_init(aux);
+	}
+
 	return 0;
 }
 
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/bus.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/bus.c
@@ -110,6 +110,19 @@ nvkm_i2c_bus_init(struct nvkm_i2c_bus *b
 	BUS_TRACE(bus, "init");
 	if (bus->func->init)
 		bus->func->init(bus);
+
+	mutex_lock(&bus->mutex);
+	bus->enabled = true;
+	mutex_unlock(&bus->mutex);
+}
+
+void
+nvkm_i2c_bus_fini(struct nvkm_i2c_bus *bus)
+{
+	BUS_TRACE(bus, "fini");
+	mutex_lock(&bus->mutex);
+	bus->enabled = false;
+	mutex_unlock(&bus->mutex);
 }
 
 void
@@ -126,9 +139,15 @@ nvkm_i2c_bus_acquire(struct nvkm_i2c_bus
 {
 	struct nvkm_i2c_pad *pad = bus->pad;
 	int ret;
+
 	BUS_TRACE(bus, "acquire");
 	mutex_lock(&bus->mutex);
-	ret = nvkm_i2c_pad_acquire(pad, NVKM_I2C_PAD_I2C);
+
+	if (bus->enabled)
+		ret = nvkm_i2c_pad_acquire(pad, NVKM_I2C_PAD_I2C);
+	else
+		ret = -EIO;
+
 	if (ret)
 		mutex_unlock(&bus->mutex);
 	return ret;
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/bus.h
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/bus.h
@@ -18,6 +18,7 @@ int nvkm_i2c_bus_new_(const struct nvkm_
 		      int id, struct nvkm_i2c_bus **);
 void nvkm_i2c_bus_del(struct nvkm_i2c_bus **);
 void nvkm_i2c_bus_init(struct nvkm_i2c_bus *);
+void nvkm_i2c_bus_fini(struct nvkm_i2c_bus *);
 
 int nvkm_i2c_bit_xfer(struct nvkm_i2c_bus *, struct i2c_msg *, int);
 

[PATCH 4.14 48/69] tty: serial: msm_serial: Fix XON/XOFF

[Greg Kroah-Hartman]

From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>

commit 61c0e37950b88bad590056286c1d766b1f167f4e upstream.

When the tty layer requests the uart to throttle, the current code
executing in msm_serial will trigger "Bad mode in Error Handler" and
generate an invalid stack frame in pstore before rebooting (that is if
pstore is indeed configured: otherwise the user shall just notice a
reboot with no further information dumped to the console).

This patch replaces the PIO byte accessor with the word accessor
already used in PIO mode.

Fixes: 68252424a7c7 ("tty: serial: msm: Support big-endian CPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/msm_serial.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -868,6 +868,7 @@ static void msm_handle_tx(struct uart_po
 	struct circ_buf *xmit = &msm_port->uart.state->xmit;
 	struct msm_dma *dma = &msm_port->tx_dma;
 	unsigned int pio_count, dma_count, dma_min;
+	char buf[4] = { 0 };
 	void __iomem *tf;
 	int err = 0;
 
@@ -877,10 +878,12 @@ static void msm_handle_tx(struct uart_po
 		else
 			tf = port->membase + UART_TF;
 
+		buf[0] = port->x_char;
+
 		if (msm_port->is_uartdm)
 			msm_reset_dm_count(port, 1);
 
-		iowrite8_rep(tf, &port->x_char, 1);
+		iowrite32_rep(tf, buf, 1);
 		port->icount.tx++;
 		port->x_char = 0;
 		return;

[PATCH 4.14 49/69] tty: max310x: Fix external crystal register setup

[Greg Kroah-Hartman]

From: Joe Burmeister <joe.burmeister@devtank.co.uk>

commit 5d24f455c182d5116dd5db8e1dc501115ecc9c2c upstream.

The datasheet states:

  Bit 4: ClockEnSet the ClockEn bit high to enable an external clocking
(crystal or clock generator at XIN). Set the ClockEn bit to 0 to disable
clocking
  Bit 1: CrystalEnSet the CrystalEn bit high to enable the crystal
oscillator. When using an external clock source at XIN, CrystalEn must
be set low.

The bit 4, MAX310X_CLKSRC_EXTCLK_BIT, should be set and was not.

This was required to make the MAX3107 with an external crystal on our
board able to send or receive data.

Signed-off-by: Joe Burmeister <joe.burmeister@devtank.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/max310x.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -579,7 +579,7 @@ static int max310x_set_ref_clk(struct ma
 	}
 
 	/* Configure clock source */
-	clksrc = xtal ? MAX310X_CLKSRC_CRYST_BIT : MAX310X_CLKSRC_EXTCLK_BIT;
+	clksrc = MAX310X_CLKSRC_EXTCLK_BIT | (xtal ? MAX310X_CLKSRC_CRYST_BIT : 0);
 
 	/* Configure PLL */
 	if (pllcfg) {

[PATCH 4.14 50/69] memcg: make it work on sparse non-0-node systems

[Greg Kroah-Hartman]

From: Jiri Slaby <jslaby@suse.cz>

commit 3e8589963773a5c23e2f1fe4bcad0e9a90b7f471 upstream.

We have a single node system with node 0 disabled:
  Scanning NUMA topology in Northbridge 24
  Number of physical nodes 2
  Skipping disabled node 0
  Node 1 MemBase 0000000000000000 Limit 00000000fbff0000
  NODE_DATA(1) allocated [mem 0xfbfda000-0xfbfeffff]

This causes crashes in memcg when system boots:
  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  #PF error: [normal kernel read fault]
...
  RIP: 0010:list_lru_add+0x94/0x170
...
  Call Trace:
   d_lru_add+0x44/0x50
   dput.part.34+0xfc/0x110
   __fput+0x108/0x230
   task_work_run+0x9f/0xc0
   exit_to_usermode_loop+0xf5/0x100

It is reproducible as far as 4.12.  I did not try older kernels.  You have
to have a new enough systemd, e.g.  241 (the reason is unknown -- was not
investigated).  Cannot be reproduced with systemd 234.

The system crashes because the size of lru array is never updated in
memcg_update_all_list_lrus and the reads are past the zero-sized array,
causing dereferences of random memory.

The root cause are list_lru_memcg_aware checks in the list_lru code.  The
test in list_lru_memcg_aware is broken: it assumes node 0 is always
present, but it is not true on some systems as can be seen above.

So fix this by avoiding checks on node 0.  Remember the memcg-awareness by
a bool flag in struct list_lru.

Link: http://lkml.kernel.org/r/20190522091940.3615-1-jslaby@suse.cz
Fixes: 60d3fd32a7a9 ("list_lru: introduce per-memcg lists")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/list_lru.h |    1 +
 mm/list_lru.c            |    8 +++-----
 2 files changed, 4 insertions(+), 5 deletions(-)

--- a/include/linux/list_lru.h
+++ b/include/linux/list_lru.h
@@ -52,6 +52,7 @@ struct list_lru {
 	struct list_lru_node	*node;
 #if defined(CONFIG_MEMCG) && !defined(CONFIG_SLOB)
 	struct list_head	list;
+	bool			memcg_aware;
 #endif
 };
 
--- a/mm/list_lru.c
+++ b/mm/list_lru.c
@@ -42,11 +42,7 @@ static void list_lru_unregister(struct l
 #if defined(CONFIG_MEMCG) && !defined(CONFIG_SLOB)
 static inline bool list_lru_memcg_aware(struct list_lru *lru)
 {
-	/*
-	 * This needs node 0 to be always present, even
-	 * in the systems supporting sparse numa ids.
-	 */
-	return !!lru->node[0].memcg_lrus;
+	return lru->memcg_aware;
 }
 
 static inline struct list_lru_one *
@@ -389,6 +385,8 @@ static int memcg_init_list_lru(struct li
 {
 	int i;
 
+	lru->memcg_aware = memcg_aware;
+
 	if (!memcg_aware)
 		return 0;
 

[PATCH 4.14 51/69] kernel/signal.c: trace_signal_deliver when signal_group_exit

[Greg Kroah-Hartman]

From: Zhenliang Wei <weizhenliang@huawei.com>

commit 98af37d624ed8c83f1953b1b6b2f6866011fc064 upstream.

In the fixes commit, removing SIGKILL from each thread signal mask and
executing "goto fatal" directly will skip the call to
"trace_signal_deliver".  At this point, the delivery tracking of the
SIGKILL signal will be inaccurate.

Therefore, we need to add trace_signal_deliver before "goto fatal" after
executing sigdelset.

Note: SEND_SIG_NOINFO matches the fact that SIGKILL doesn't have any info.

Link: http://lkml.kernel.org/r/20190425025812.91424-1-weizhenliang@huawei.com
Fixes: cf43a757fd4944 ("signal: Restore the stop PTRACE_EVENT_EXIT")
Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com>
Reviewed-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Ivan Delalande <colona@arista.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/signal.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2271,6 +2271,8 @@ relock:
 	if (signal_group_exit(signal)) {
 		ksig->info.si_signo = signr = SIGKILL;
 		sigdelset(&current->pending.signal, SIGKILL);
+		trace_signal_deliver(SIGKILL, SEND_SIG_NOINFO,
+				&sighand->action[SIGKILL - 1]);
 		recalc_sigpending();
 		goto fatal;
 	}

[PATCH 4.14 52/69] docs: Fix conf.py for Sphinx 2.0

[Greg Kroah-Hartman]

From: Jonathan Corbet <corbet@lwn.net>

commit 3bc8088464712fdcb078eefb68837ccfcc413c88 upstream.

Our version check in Documentation/conf.py never envisioned a world where
Sphinx moved beyond 1.x.  Now that the unthinkable has happened, fix our
version check to handle higher version numbers correctly.

Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/conf.py |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Documentation/conf.py
+++ b/Documentation/conf.py
@@ -37,7 +37,7 @@ needs_sphinx = '1.3'
 extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include', 'cdomain', 'kfigure']
 
 # The name of the math extension changed on Sphinx 1.4
-if major == 1 and minor > 3:
+if (major == 1 and minor > 3) or (major > 1):
     extensions.append("sphinx.ext.imgmath")
 else:
     extensions.append("sphinx.ext.pngmath")

[PATCH 4.14 53/69] doc: Cope with the deprecation of AutoReporter

[Greg Kroah-Hartman]

From: Jonathan Corbet <corbet@lwn.net>

commit 2404dad1f67f8917e30fc22a85e0dbcc85b99955 upstream.

AutoReporter is going away; recent versions of sphinx emit a warning like:

  Documentation/sphinx/kerneldoc.py:125:
      RemovedInSphinx20Warning: AutodocReporter is now deprecated.
      Use sphinx.util.docutils.switch_source_input() instead.

Make the switch.  But switch_source_input() only showed up in 1.7, so we
have to do ugly version checks to keep things working in older versions.

Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/sphinx/kerneldoc.py |   34 ++++++++++++++++++++++++++--------
 1 file changed, 26 insertions(+), 8 deletions(-)

--- a/Documentation/sphinx/kerneldoc.py
+++ b/Documentation/sphinx/kerneldoc.py
@@ -37,7 +37,17 @@ import glob
 from docutils import nodes, statemachine
 from docutils.statemachine import ViewList
 from docutils.parsers.rst import directives, Directive
-from sphinx.ext.autodoc import AutodocReporter
+
+#
+# AutodocReporter is only good up to Sphinx 1.7
+#
+import sphinx
+
+Use_SSI = sphinx.__version__[:3] >= '1.7'
+if Use_SSI:
+    from sphinx.util.docutils import switch_source_input
+else:
+    from sphinx.ext.autodoc import AutodocReporter
 
 __version__  = '1.0'
 
@@ -117,13 +127,7 @@ class KernelDocDirective(Directive):
                     lineoffset += 1
 
             node = nodes.section()
-            buf = self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter
-            self.state.memo.reporter = AutodocReporter(result, self.state.memo.reporter)
-            self.state.memo.title_styles, self.state.memo.section_level = [], 0
-            try:
-                self.state.nested_parse(result, 0, node, match_titles=1)
-            finally:
-                self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter = buf
+            self.do_parse(result, node)
 
             return node.children
 
@@ -132,6 +136,20 @@ class KernelDocDirective(Directive):
                          (" ".join(cmd), str(e)))
             return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))]
 
+    def do_parse(self, result, node):
+        if Use_SSI:
+            with switch_source_input(self.state, result):
+                self.state.nested_parse(result, 0, node, match_titles=1)
+        else:
+            save = self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter
+            self.state.memo.reporter = AutodocReporter(result, self.state.memo.reporter)
+            self.state.memo.title_styles, self.state.memo.section_level = [], 0
+            try:
+                self.state.nested_parse(result, 0, node, match_titles=1)
+            finally:
+                self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter = save
+
+
 def setup(app):
     app.add_config_value('kerneldoc_bin', None, 'env')
     app.add_config_value('kerneldoc_srctree', None, 'env')

[PATCH 4.14 54/69] doc: Cope with Sphinx logging deprecations

[Greg Kroah-Hartman]

From: Jonathan Corbet <corbet@lwn.net>

commit 096ea522e84ea68f8e6c41e5e7294731a81e29bc upstream.

Recent versions of sphinx will emit messages like:

  Documentation/sphinx/kerneldoc.py:103:
     RemovedInSphinx20Warning: app.warning() is now deprecated.
     Use sphinx.util.logging instead.

Switch to sphinx.util.logging to make this unsightly message go away.
Alas, that interface was only added in version 1.6, so we have to add a
version check to keep things working with older sphinxes.

Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/sphinx/kerneldoc.py |   12 +++++++----
 Documentation/sphinx/kernellog.py |   28 ++++++++++++++++++++++++++
 Documentation/sphinx/kfigure.py   |   40 +++++++++++++++++++++-----------------
 3 files changed, 59 insertions(+), 21 deletions(-)

--- a/Documentation/sphinx/kerneldoc.py
+++ b/Documentation/sphinx/kerneldoc.py
@@ -49,6 +49,8 @@ if Use_SSI:
 else:
     from sphinx.ext.autodoc import AutodocReporter
 
+import kernellog
+
 __version__  = '1.0'
 
 class KernelDocDirective(Directive):
@@ -96,7 +98,8 @@ class KernelDocDirective(Directive):
         cmd += [filename]
 
         try:
-            env.app.verbose('calling kernel-doc \'%s\'' % (" ".join(cmd)))
+            kernellog.verbose(env.app,
+                              'calling kernel-doc \'%s\'' % (" ".join(cmd)))
 
             p = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
             out, err = p.communicate()
@@ -106,7 +109,8 @@ class KernelDocDirective(Directive):
             if p.returncode != 0:
                 sys.stderr.write(err)
 
-                env.app.warn('kernel-doc \'%s\' failed with return code %d' % (" ".join(cmd), p.returncode))
+                kernellog.warn(env.app,
+                               'kernel-doc \'%s\' failed with return code %d' % (" ".join(cmd), p.returncode))
                 return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))]
             elif env.config.kerneldoc_verbosity > 0:
                 sys.stderr.write(err)
@@ -132,8 +136,8 @@ class KernelDocDirective(Directive):
             return node.children
 
         except Exception as e:  # pylint: disable=W0703
-            env.app.warn('kernel-doc \'%s\' processing failed with: %s' %
-                         (" ".join(cmd), str(e)))
+            kernellog.warn(env.app, 'kernel-doc \'%s\' processing failed with: %s' %
+                           (" ".join(cmd), str(e)))
             return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))]
 
     def do_parse(self, result, node):
--- /dev/null
+++ b/Documentation/sphinx/kernellog.py
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Sphinx has deprecated its older logging interface, but the replacement
+# only goes back to 1.6.  So here's a wrapper layer to keep around for
+# as long as we support 1.4.
+#
+import sphinx
+
+if sphinx.__version__[:3] >= '1.6':
+    UseLogging = True
+    from sphinx.util import logging
+    logger = logging.getLogger('kerneldoc')
+else:
+    UseLogging = False
+
+def warn(app, message):
+    if UseLogging:
+        logger.warning(message)
+    else:
+        app.warn(message)
+
+def verbose(app, message):
+    if UseLogging:
+        logger.verbose(message)
+    else:
+        app.verbose(message)
+
+
--- a/Documentation/sphinx/kfigure.py
+++ b/Documentation/sphinx/kfigure.py
@@ -60,6 +60,8 @@ import sphinx
 from sphinx.util.nodes import clean_astext
 from six import iteritems
 
+import kernellog
+
 PY3 = sys.version_info[0] == 3
 
 if PY3:
@@ -171,20 +173,20 @@ def setupTools(app):
     This function is called once, when the builder is initiated.
     """
     global dot_cmd, convert_cmd   # pylint: disable=W0603
-    app.verbose("kfigure: check installed tools ...")
+    kernellog.verbose(app, "kfigure: check installed tools ...")
 
     dot_cmd = which('dot')
     convert_cmd = which('convert')
 
     if dot_cmd:
-        app.verbose("use dot(1) from: " + dot_cmd)
+        kernellog.verbose(app, "use dot(1) from: " + dot_cmd)
     else:
-        app.warn("dot(1) not found, for better output quality install "
-                 "graphviz from http://www.graphviz.org")
+        kernellog.warn(app, "dot(1) not found, for better output quality install "
+                       "graphviz from http://www.graphviz.org")
     if convert_cmd:
-        app.verbose("use convert(1) from: " + convert_cmd)
+        kernellog.verbose(app, "use convert(1) from: " + convert_cmd)
     else:
-        app.warn(
+        kernellog.warn(app,
             "convert(1) not found, for SVG to PDF conversion install "
             "ImageMagick (https://www.imagemagick.org)")
 
@@ -220,12 +222,13 @@ def convert_image(img_node, translator,
 
     # in kernel builds, use 'make SPHINXOPTS=-v' to see verbose messages
 
-    app.verbose('assert best format for: ' + img_node['uri'])
+    kernellog.verbose(app, 'assert best format for: ' + img_node['uri'])
 
     if in_ext == '.dot':
 
         if not dot_cmd:
-            app.verbose("dot from graphviz not available / include DOT raw.")
+            kernellog.verbose(app,
+                              "dot from graphviz not available / include DOT raw.")
             img_node.replace_self(file2literal(src_fname))
 
         elif translator.builder.format == 'latex':
@@ -252,7 +255,8 @@ def convert_image(img_node, translator,
 
         if translator.builder.format == 'latex':
             if convert_cmd is None:
-                app.verbose("no SVG to PDF conversion available / include SVG raw.")
+                kernellog.verbose(app,
+                                  "no SVG to PDF conversion available / include SVG raw.")
                 img_node.replace_self(file2literal(src_fname))
             else:
                 dst_fname = path.join(translator.builder.outdir, fname + '.pdf')
@@ -265,18 +269,19 @@ def convert_image(img_node, translator,
         _name = dst_fname[len(translator.builder.outdir) + 1:]
 
         if isNewer(dst_fname, src_fname):
-            app.verbose("convert: {out}/%s already exists and is newer" % _name)
+            kernellog.verbose(app,
+                              "convert: {out}/%s already exists and is newer" % _name)
 
         else:
             ok = False
             mkdir(path.dirname(dst_fname))
 
             if in_ext == '.dot':
-                app.verbose('convert DOT to: {out}/' + _name)
+                kernellog.verbose(app, 'convert DOT to: {out}/' + _name)
                 ok = dot2format(app, src_fname, dst_fname)
 
             elif in_ext == '.svg':
-                app.verbose('convert SVG to: {out}/' + _name)
+                kernellog.verbose(app, 'convert SVG to: {out}/' + _name)
                 ok = svg2pdf(app, src_fname, dst_fname)
 
             if not ok:
@@ -305,7 +310,8 @@ def dot2format(app, dot_fname, out_fname
     with open(out_fname, "w") as out:
         exit_code = subprocess.call(cmd, stdout = out)
         if exit_code != 0:
-            app.warn("Error #%d when calling: %s" % (exit_code, " ".join(cmd)))
+            kernellog.warn(app,
+                          "Error #%d when calling: %s" % (exit_code, " ".join(cmd)))
     return bool(exit_code == 0)
 
 def svg2pdf(app, svg_fname, pdf_fname):
@@ -322,7 +328,7 @@ def svg2pdf(app, svg_fname, pdf_fname):
     # use stdout and stderr from parent
     exit_code = subprocess.call(cmd)
     if exit_code != 0:
-        app.warn("Error #%d when calling: %s" % (exit_code, " ".join(cmd)))
+        kernellog.warn(app, "Error #%d when calling: %s" % (exit_code, " ".join(cmd)))
     return bool(exit_code == 0)
 
 
@@ -415,15 +421,15 @@ def visit_kernel_render(self, node):
     app = self.builder.app
     srclang = node.get('srclang')
 
-    app.verbose('visit kernel-render node lang: "%s"' % (srclang))
+    kernellog.verbose('visit kernel-render node lang: "%s"' % (srclang))
 
     tmp_ext = RENDER_MARKUP_EXT.get(srclang, None)
     if tmp_ext is None:
-        app.warn('kernel-render: "%s" unknow / include raw.' % (srclang))
+        kernellog.warn('kernel-render: "%s" unknow / include raw.' % (srclang))
         return
 
     if not dot_cmd and tmp_ext == '.dot':
-        app.verbose("dot from graphviz not available / include raw.")
+        kernellog.verbose("dot from graphviz not available / include raw.")
         return
 
     literal_block = node[0]

[PATCH 4.14 55/69] ima: show rules with IMA_INMASK correctly

[Greg Kroah-Hartman]

From: Roberto Sassu <roberto.sassu@huawei.com>

commit 8cdc23a3d9ec0944000ad43bad588e36afdc38cd upstream.

Show the '^' character when a policy rule has flag IMA_INMASK.

Fixes: 80eae209d63ac ("IMA: allow reading back the current IMA policy")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/integrity/ima/ima_policy.c |   21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

--- a/security/integrity/ima/ima_policy.c
+++ b/security/integrity/ima/ima_policy.c
@@ -964,10 +964,10 @@ enum {
 };
 
 static const char *const mask_tokens[] = {
-	"MAY_EXEC",
-	"MAY_WRITE",
-	"MAY_READ",
-	"MAY_APPEND"
+	"^MAY_EXEC",
+	"^MAY_WRITE",
+	"^MAY_READ",
+	"^MAY_APPEND"
 };
 
 #define __ima_hook_stringify(str)	(#str),
@@ -1027,6 +1027,7 @@ int ima_policy_show(struct seq_file *m,
 	struct ima_rule_entry *entry = v;
 	int i;
 	char tbuf[64] = {0,};
+	int offset = 0;
 
 	rcu_read_lock();
 
@@ -1046,15 +1047,17 @@ int ima_policy_show(struct seq_file *m,
 	if (entry->flags & IMA_FUNC)
 		policy_func_show(m, entry->func);
 
-	if (entry->flags & IMA_MASK) {
+	if ((entry->flags & IMA_MASK) || (entry->flags & IMA_INMASK)) {
+		if (entry->flags & IMA_MASK)
+			offset = 1;
 		if (entry->mask & MAY_EXEC)
-			seq_printf(m, pt(Opt_mask), mt(mask_exec));
+			seq_printf(m, pt(Opt_mask), mt(mask_exec) + offset);
 		if (entry->mask & MAY_WRITE)
-			seq_printf(m, pt(Opt_mask), mt(mask_write));
+			seq_printf(m, pt(Opt_mask), mt(mask_write) + offset);
 		if (entry->mask & MAY_READ)
-			seq_printf(m, pt(Opt_mask), mt(mask_read));
+			seq_printf(m, pt(Opt_mask), mt(mask_read) + offset);
 		if (entry->mask & MAY_APPEND)
-			seq_printf(m, pt(Opt_mask), mt(mask_append));
+			seq_printf(m, pt(Opt_mask), mt(mask_append) + offset);
 		seq_puts(m, " ");
 	}
 

[PATCH 4.14 56/69] serial: sh-sci: disable DMA for uart_console

[Greg Kroah-Hartman]

From: George G. Davis <george_davis@mentor.com>

commit 099506cbbc79c0bd52b19cb6b930f256dabc3950 upstream.

As noted in commit 84b40e3b57ee ("serial: 8250: omap: Disable DMA for
console UART"), UART console lines use low-level PIO only access functions
which will conflict with use of the line when DMA is enabled, e.g. when
the console line is also used for systemd messages. So disable DMA
support for UART console lines.

Reported-by: Michael Rodin <mrodin@de.adit-jv.com>
Link: https://patchwork.kernel.org/patch/10929511/
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/sh-sci.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1479,6 +1479,13 @@ static void sci_request_dma(struct uart_
 
 	dev_dbg(port->dev, "%s: port %d\n", __func__, port->line);
 
+	/*
+	 * DMA on console may interfere with Kernel log messages which use
+	 * plain putchar(). So, simply don't use it with a console.
+	 */
+	if (uart_console(port))
+		return;
+
 	if (!port->dev->of_node)
 		return;
 

[PATCH 4.14 57/69] staging: vc04_services: prevent integer overflow in create_pagelist()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit ca641bae6da977d638458e78cd1487b6160a2718 upstream.

The create_pagelist() "count" parameter comes from the user in
vchiq_ioctl() and it could overflow.  If you look at how create_page()
is called in vchiq_prepare_bulk_data(), then the "size" variable is an
int so it doesn't make sense to allow negatives or larger than INT_MAX.

I don't know this code terribly well, but I believe that typical values
of "count" are typically quite low and I don't think this check will
affect normal valid uses at all.

The "pagelist_size" calculation can also overflow on 32 bit systems, but
not on 64 bit systems.  I have added an integer overflow check for that
as well.

The Raspberry PI doesn't offer the same level of memory protection that
x86 does so these sorts of bugs are probably not super critical to fix.

Fixes: 71bad7f08641 ("staging: add bcm2708 vchiq driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
@@ -405,9 +405,18 @@ create_pagelist(char __user *buf, size_t
 	int dma_buffers;
 	dma_addr_t dma_addr;
 
+	if (count >= INT_MAX - PAGE_SIZE)
+		return NULL;
+
 	offset = ((unsigned int)(unsigned long)buf & (PAGE_SIZE - 1));
 	num_pages = DIV_ROUND_UP(count + offset, PAGE_SIZE);
 
+	if (num_pages > (SIZE_MAX - sizeof(PAGELIST_T) -
+			 sizeof(struct vchiq_pagelist_info)) /
+			(sizeof(u32) + sizeof(pages[0]) +
+			 sizeof(struct scatterlist)))
+		return NULL;
+
 	pagelist_size = sizeof(PAGELIST_T) +
 			(num_pages * sizeof(u32)) +
 			(num_pages * sizeof(pages[0]) +

[PATCH 4.14 58/69] staging: wlan-ng: fix adapter initialization failure

[Greg Kroah-Hartman]

From: Tim Collier <osdevtc@gmail.com>

commit a67fedd788182764dc8ed59037c604b7e60349f1 upstream.

Commit e895f00a8496 ("Staging: wlan-ng: hfa384x_usb.c Fixed too long
code line warnings.") moved the retrieval of the transfer buffer from
the URB from the top of function hfa384x_usbin_callback to a point
after reposting of the URB via a call to submit_rx_urb. The reposting
of the URB allocates a new transfer buffer so the new buffer is
retrieved instead of the buffer containing the response passed into
the callback. This results in failure to initialize the adapter with
an error reported in the system log (something like "CTLX[1] error:
state(Request failed)").

This change moves the retrieval to just before the point where the URB
is reposted so that the correct transfer buffer is retrieved and
initialization of the device succeeds.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Fixes: e895f00a8496 ("Staging: wlan-ng: hfa384x_usb.c Fixed too long code line warnings.")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/wlan-ng/hfa384x_usb.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/staging/wlan-ng/hfa384x_usb.c
+++ b/drivers/staging/wlan-ng/hfa384x_usb.c
@@ -3119,7 +3119,9 @@ static void hfa384x_usbin_callback(struc
 		break;
 	}
 
+	/* Save values from the RX URB before reposting overwrites it. */
 	urb_status = urb->status;
+	usbin = (union hfa384x_usbin *)urb->transfer_buffer;
 
 	if (action != ABORT) {
 		/* Repost the RX URB */
@@ -3136,7 +3138,6 @@ static void hfa384x_usbin_callback(struc
 	/* Note: the check of the sw_support field, the type field doesn't
 	 *       have bit 12 set like the docs suggest.
 	 */
-	usbin = (union hfa384x_usbin *)urb->transfer_buffer;
 	type = le16_to_cpu(usbin->type);
 	if (HFA384x_USB_ISRXFRM(type)) {
 		if (action == HANDLE) {

[PATCH 4.14 59/69] CIFS: cifs_read_allocate_pages: dont iterate through whole page array on ENOMEM

[Greg Kroah-Hartman]

From: Roberto Bergantinos Corpas <rbergant@redhat.com>

commit 31fad7d41e73731f05b8053d17078638cf850fa6 upstream.

 In cifs_read_allocate_pages, in case of ENOMEM, we go through
whole rdata->pages array but we have failed the allocation before
nr_pages, therefore we may end up calling put_page with NULL
pointer, causing oops

Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/file.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -2984,7 +2984,9 @@ cifs_read_allocate_pages(struct cifs_rea
 	}
 
 	if (rc) {
-		for (i = 0; i < nr_pages; i++) {
+		unsigned int nr_page_failed = i;
+
+		for (i = 0; i < nr_page_failed; i++) {
 			put_page(rdata->pages[i]);
 			rdata->pages[i] = NULL;
 		}

[PATCH 4.14 60/69] Revert "lockd: Show pid of lockd for remote locks"

[Greg Kroah-Hartman]

From: Benjamin Coddington <bcodding@redhat.com>

commit 141731d15d6eb2fd9aaefbf9b935ce86ae243074 upstream.

This reverts most of commit b8eee0e90f97 ("lockd: Show pid of lockd for
remote locks"), which caused remote locks to not be differentiated between
remote processes for NLM.

We retain the fixup for setting the client's fl_pid to a negative value.

Fixes: b8eee0e90f97 ("lockd: Show pid of lockd for remote locks")
Cc: stable@vger.kernel.org

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: XueWei Zhang <xueweiz@google.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/lockd/xdr.c  |    4 ++--
 fs/lockd/xdr4.c |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

--- a/fs/lockd/xdr.c
+++ b/fs/lockd/xdr.c
@@ -127,7 +127,7 @@ nlm_decode_lock(__be32 *p, struct nlm_lo
 
 	locks_init_lock(fl);
 	fl->fl_owner = current->files;
-	fl->fl_pid   = current->tgid;
+	fl->fl_pid   = (pid_t)lock->svid;
 	fl->fl_flags = FL_POSIX;
 	fl->fl_type  = F_RDLCK;		/* as good as anything else */
 	start = ntohl(*p++);
@@ -269,7 +269,7 @@ nlmsvc_decode_shareargs(struct svc_rqst
 	memset(lock, 0, sizeof(*lock));
 	locks_init_lock(&lock->fl);
 	lock->svid = ~(u32) 0;
-	lock->fl.fl_pid = current->tgid;
+	lock->fl.fl_pid = (pid_t)lock->svid;
 
 	if (!(p = nlm_decode_cookie(p, &argp->cookie))
 	 || !(p = xdr_decode_string_inplace(p, &lock->caller,
--- a/fs/lockd/xdr4.c
+++ b/fs/lockd/xdr4.c
@@ -119,7 +119,7 @@ nlm4_decode_lock(__be32 *p, struct nlm_l
 
 	locks_init_lock(fl);
 	fl->fl_owner = current->files;
-	fl->fl_pid   = current->tgid;
+	fl->fl_pid   = (pid_t)lock->svid;
 	fl->fl_flags = FL_POSIX;
 	fl->fl_type  = F_RDLCK;		/* as good as anything else */
 	p = xdr_decode_hyper(p, &start);
@@ -266,7 +266,7 @@ nlm4svc_decode_shareargs(struct svc_rqst
 	memset(lock, 0, sizeof(*lock));
 	locks_init_lock(&lock->fl);
 	lock->svid = ~(u32) 0;
-	lock->fl.fl_pid = current->tgid;
+	lock->fl.fl_pid = (pid_t)lock->svid;
 
 	if (!(p = nlm4_decode_cookie(p, &argp->cookie))
 	 || !(p = xdr_decode_string_inplace(p, &lock->caller,

[PATCH 4.14 61/69] gcc-plugins: Fix build failures under Darwin host

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

commit 7210e060155b9cf557fb13128353c3e494fa5ed3 upstream.

The gcc-common.h file did not take into account certain macros that
might have already been defined in the build environment. This updates
the header to avoid redefining the macros, as seen on a Darwin host
using gcc 4.9.2:

 HOSTCXX -fPIC scripts/gcc-plugins/arm_ssp_per_task_plugin.o - due to: scripts/gcc-plugins/gcc-common.h
In file included from scripts/gcc-plugins/arm_ssp_per_task_plugin.c:3:0:
scripts/gcc-plugins/gcc-common.h:153:0: warning: "__unused" redefined
^
In file included from /usr/include/stdio.h:64:0,
                from /Users/hns/Documents/Projects/QuantumSTEP/System/Library/Frameworks/System.framework/Versions-jessie/x86_64-apple-darwin15.0.0/gcc/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.9.2/plugin/include/system.h:40,
                from /Users/hns/Documents/Projects/QuantumSTEP/System/Library/Frameworks/System.framework/Versions-jessie/x86_64-apple-darwin15.0.0/gcc/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.9.2/plugin/include/gcc-plugin.h:28,
                from /Users/hns/Documents/Projects/QuantumSTEP/System/Library/Frameworks/System.framework/Versions-jessie/x86_64-apple-darwin15.0.0/gcc/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.9.2/plugin/include/plugin.h:23,
                from scripts/gcc-plugins/gcc-common.h:9,
                from scripts/gcc-plugins/arm_ssp_per_task_plugin.c:3:
/usr/include/sys/cdefs.h:161:0: note: this is the location of the previous definition
^

Reported-and-tested-by: "H. Nikolaus Schaller" <hns@goldelico.com>
Fixes: 189af4657186 ("ARM: smp: add support for per-task stack canaries")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 scripts/gcc-plugins/gcc-common.h |    4 ++++
 1 file changed, 4 insertions(+)

--- a/scripts/gcc-plugins/gcc-common.h
+++ b/scripts/gcc-plugins/gcc-common.h
@@ -150,8 +150,12 @@ void print_gimple_expr(FILE *, gimple, i
 void dump_gimple_stmt(pretty_printer *, gimple, int, int);
 #endif
 
+#ifndef __unused
 #define __unused __attribute__((__unused__))
+#endif
+#ifndef __visible
 #define __visible __attribute__((visibility("default")))
+#endif
 
 #define DECL_NAME_POINTER(node) IDENTIFIER_POINTER(DECL_NAME(node))
 #define DECL_NAME_LENGTH(node) IDENTIFIER_LENGTH(DECL_NAME(node))

[PATCH 4.14 62/69] drm/vmwgfx: Dont send drm sysfs hotplug events on initial master set

[Greg Kroah-Hartman]

From: Thomas Hellstrom <thellstrom@vmware.com>

commit 63cb44441826e842b7285575b96db631cc9f2505 upstream.

This may confuse user-space clients like plymouth that opens a drm
file descriptor as a result of a hotplug event and then generates a
new event...

Cc: <stable@vger.kernel.org>
Fixes: 5ea1734827bb ("drm/vmwgfx: Send a hotplug event at master_set")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -1245,7 +1245,13 @@ static int vmw_master_set(struct drm_dev
 	}
 
 	dev_priv->active_master = vmaster;
-	drm_sysfs_hotplug_event(dev);
+
+	/*
+	 * Inform a new master that the layout may have changed while
+	 * it was gone.
+	 */
+	if (!from_open)
+		drm_sysfs_hotplug_event(dev);
 
 	return 0;
 }

[PATCH 4.14 63/69] drm/rockchip: shutdown drm subsystem on shutdown

[Greg Kroah-Hartman]

From: Vicente Bergas <vicencb@gmail.com>

commit b8f9d7f37b6af829c34c49d1a4f73ce6ed58e403 upstream.

As explained by Robin Murphy:
> the IOMMU shutdown disables paging, so if the VOP is still
> scanning out then that will result in whatever IOVAs it was using now going
> straight out onto the bus as physical addresses.

We had a more radical approach before in commit
7f3ef5dedb14 ("drm/rockchip: Allow driver to be shutdown on reboot/kexec")
but that resulted in new warnings and oopses on shutdown on rk3399
chromeos devices.

So second try is resurrecting Vicentes shutdown change which should
achieve the same result but in a less drastic way.

Fixes: 63238173b2fa ("Revert "drm/rockchip: Allow driver to be shutdown on reboot/kexec"")
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: stable@vger.kernel.org
Suggested-by: JeffyChen <jeffy.chen@rock-chips.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
[adapted commit message to explain the history]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Brian Norris <briannorris@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190402113753.10118-1-heiko@sntech.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
@@ -425,6 +425,14 @@ static int rockchip_drm_platform_remove(
 	return 0;
 }
 
+static void rockchip_drm_platform_shutdown(struct platform_device *pdev)
+{
+	struct drm_device *drm = platform_get_drvdata(pdev);
+
+	if (drm)
+		drm_atomic_helper_shutdown(drm);
+}
+
 static const struct of_device_id rockchip_drm_dt_ids[] = {
 	{ .compatible = "rockchip,display-subsystem", },
 	{ /* sentinel */ },
@@ -434,6 +442,7 @@ MODULE_DEVICE_TABLE(of, rockchip_drm_dt_
 static struct platform_driver rockchip_drm_platform_driver = {
 	.probe = rockchip_drm_platform_probe,
 	.remove = rockchip_drm_platform_remove,
+	.shutdown = rockchip_drm_platform_shutdown,
 	.driver = {
 		.name = "rockchip-drm",
 		.of_match_table = rockchip_drm_dt_ids,

[PATCH 4.14 64/69] Compiler Attributes: add support for __copy (gcc >= 9)

[Greg Kroah-Hartman]

From: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>

commit c0d9782f5b6d7157635ae2fd782a4b27d55a6013 upstream.

>From the GCC manual:

  copy
  copy(function)

    The copy attribute applies the set of attributes with which function
    has been declared to the declaration of the function to which
    the attribute is applied. The attribute is designed for libraries
    that define aliases or function resolvers that are expected
    to specify the same set of attributes as their targets. The copy
    attribute can be used with functions, variables, or types. However,
    the kind of symbol to which the attribute is applied (either
    function or variable) must match the kind of symbol to which
    the argument refers. The copy attribute copies only syntactic and
    semantic attributes but not attributes that affect a symbol’s
    linkage or visibility such as alias, visibility, or weak.
    The deprecated attribute is also not copied.

  https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html

The upcoming GCC 9 release extends the -Wmissing-attributes warnings
(enabled by -Wall) to C and aliases: it warns when particular function
attributes are missing in the aliases but not in their target, e.g.:

    void __cold f(void) {}
    void __alias("f") g(void);

diagnoses:

    warning: 'g' specifies less restrictive attribute than
    its target 'f': 'cold' [-Wmissing-attributes]

Using __copy(f) we can copy the __cold attribute from f to g:

    void __cold f(void) {}
    void __copy(f) __alias("f") g(void);

This attribute is most useful to deal with situations where an alias
is declared but we don't know the exact attributes the target has.

For instance, in the kernel, the widely used module_init/exit macros
define the init/cleanup_module aliases, but those cannot be marked
always as __init/__exit since some modules do not have their
functions marked as such.

Suggested-by: Martin Sebor <msebor@gcc.gnu.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Changes in v2:
- Fix define of compatibility __copy macro (add symbol argument)

 include/linux/compiler-gcc.h   |    4 ++++
 include/linux/compiler_types.h |    4 ++++
 2 files changed, 8 insertions(+)

--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -343,6 +343,10 @@
 #define __designated_init __attribute__((designated_init))
 #endif
 
+#if GCC_VERSION >= 90100
+#define __copy(symbol)                 __attribute__((__copy__(symbol)))
+#endif
+
 #endif	/* gcc version >= 40000 specific checks */
 
 #if !defined(__noclone)
--- a/include/linux/compiler_types.h
+++ b/include/linux/compiler_types.h
@@ -230,6 +230,10 @@ struct ftrace_likely_data {
 # define __latent_entropy
 #endif
 
+#ifndef __copy
+# define __copy(symbol)
+#endif
+
 #ifndef __randomize_layout
 # define __randomize_layout __designated_init
 #endif

[PATCH 4.14 65/69] include/linux/module.h: copy __init/__exit attrs to init/cleanup_module

[Greg Kroah-Hartman]

From: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>

commit a6e60d84989fa0e91db7f236eda40453b0e44afa upstream.

The upcoming GCC 9 release extends the -Wmissing-attributes warnings
(enabled by -Wall) to C and aliases: it warns when particular function
attributes are missing in the aliases but not in their target.

In particular, it triggers for all the init/cleanup_module
aliases in the kernel (defined by the module_init/exit macros),
ending up being very noisy.

These aliases point to the __init/__exit functions of a module,
which are defined as __cold (among other attributes). However,
the aliases themselves do not have the __cold attribute.

Since the compiler behaves differently when compiling a __cold
function as well as when compiling paths leading to calls
to __cold functions, the warning is trying to point out
the possibly-forgotten attribute in the alias.

In order to keep the warning enabled, we decided to silence
this case. Ideally, we would mark the aliases directly
as __init/__exit. However, there are currently around 132 modules
in the kernel which are missing __init/__exit in their init/cleanup
functions (either because they are missing, or for other reasons,
e.g. the functions being called from somewhere else); and
a section mismatch is a hard error.

A conservative alternative was to mark the aliases as __cold only.
However, since we would like to eventually enforce __init/__exit
to be always marked,  we chose to use the new __copy function
attribute (introduced by GCC 9 as well to deal with this).
With it, we copy the attributes used by the target functions
into the aliases. This way, functions that were not marked
as __init/__exit won't have their aliases marked either,
and therefore there won't be a section mismatch.

Note that the warning would go away marking either the extern
declaration, the definition, or both. However, we only mark
the definition of the alias, since we do not want callers
(which only see the declaration) to be compiled as if the function
was __cold (and therefore the paths leading to those calls
would be assumed to be unlikely).

Link: https://lore.kernel.org/lkml/20190123173707.GA16603@gmail.com/
Link: https://lore.kernel.org/lkml/20190206175627.GA20399@gmail.com/
Suggested-by: Martin Sebor <msebor@gcc.gnu.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/module.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -128,13 +128,13 @@ extern void cleanup_module(void);
 #define module_init(initfn)					\
 	static inline initcall_t __maybe_unused __inittest(void)		\
 	{ return initfn; }					\
-	int init_module(void) __attribute__((alias(#initfn)));
+	int init_module(void) __copy(initfn) __attribute__((alias(#initfn)));
 
 /* This is only required if you want to be unloadable. */
 #define module_exit(exitfn)					\
 	static inline exitcall_t __maybe_unused __exittest(void)		\
 	{ return exitfn; }					\
-	void cleanup_module(void) __attribute__((alias(#exitfn)));
+	void cleanup_module(void) __copy(exitfn) __attribute__((alias(#exitfn)));
 
 #endif
 

[PATCH 4.14 66/69] Revert "x86/build: Move _etext to actual end of .text"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 392bef709659abea614abfe53cf228e7a59876a4.

It seems to cause lots of problems when using the gold linker, and no
one really needs this at the moment, so just revert it from the stable
trees.

Cc: Sami Tolvanen <samitolvanen@google.com>
Reported-by: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Alec Ari <neotheuser@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/vmlinux.lds.S |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -131,10 +131,10 @@ SECTIONS
 		*(.text.__x86.indirect_thunk)
 		__indirect_thunk_end = .;
 #endif
-	} :text = 0x9090
 
-	/* End of text section */
-	_etext = .;
+		/* End of text section */
+		_etext = .;
+	} :text = 0x9090
 
 	NOTES :text :note
 

[PATCH 4.14 67/69] Revert "binder: fix handling of misaligned binder object"

[Greg Kroah-Hartman]

From: Todd Kjos <tkjos@android.com>

This reverts commit 33c6b9ca70a8b066a613e2a3d0331ae8f82aa31a.

The commit message is for a different patch. Reverting and then adding
the same patch back with the correct commit message.

Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: stable <stable@vger.kernel.org> # 4.14
Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/android/binder_alloc.c |   18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

--- a/drivers/android/binder_alloc.c
+++ b/drivers/android/binder_alloc.c
@@ -945,13 +945,14 @@ enum lru_status binder_alloc_free_page(s
 
 	index = page - alloc->pages;
 	page_addr = (uintptr_t)alloc->buffer + index * PAGE_SIZE;
-
-	mm = alloc->vma_vm_mm;
-	if (!mmget_not_zero(mm))
-		goto err_mmget;
-	if (!down_write_trylock(&mm->mmap_sem))
-		goto err_down_write_mmap_sem_failed;
 	vma = binder_alloc_get_vma(alloc);
+	if (vma) {
+		if (!mmget_not_zero(alloc->vma_vm_mm))
+			goto err_mmget;
+		mm = alloc->vma_vm_mm;
+		if (!down_write_trylock(&mm->mmap_sem))
+			goto err_down_write_mmap_sem_failed;
+	}
 
 	list_lru_isolate(lru, item);
 	spin_unlock(lock);
@@ -964,9 +965,10 @@ enum lru_status binder_alloc_free_page(s
 			       PAGE_SIZE);
 
 		trace_binder_unmap_user_end(alloc, index);
+
+		up_write(&mm->mmap_sem);
+		mmput(mm);
 	}
-	up_write(&mm->mmap_sem);
-	mmput(mm);
 
 	trace_binder_unmap_kernel_start(alloc, index);
 

[PATCH 4.14 68/69] binder: fix race between munmap() and direct reclaim

[Greg Kroah-Hartman]

From: Todd Kjos <tkjos@android.com>

commit 5cec2d2e5839f9c0fec319c523a911e0a7fd299f upstream.

An munmap() on a binder device causes binder_vma_close() to be called
which clears the alloc->vma pointer.

If direct reclaim causes binder_alloc_free_page() to be called, there
is a race where alloc->vma is read into a local vma pointer and then
used later after the mm->mmap_sem is acquired. This can result in
calling zap_page_range() with an invalid vma which manifests as a
use-after-free in zap_page_range().

The fix is to check alloc->vma after acquiring the mmap_sem (which we
were acquiring anyway) and skip zap_page_range() if it has changed
to NULL.

Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Todd Kjos <tkjos@google.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: stable <stable@vger.kernel.org> # 4.14
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/android/binder_alloc.c |   18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

--- a/drivers/android/binder_alloc.c
+++ b/drivers/android/binder_alloc.c
@@ -945,14 +945,13 @@ enum lru_status binder_alloc_free_page(s
 
 	index = page - alloc->pages;
 	page_addr = (uintptr_t)alloc->buffer + index * PAGE_SIZE;
+
+	mm = alloc->vma_vm_mm;
+	if (!mmget_not_zero(mm))
+		goto err_mmget;
+	if (!down_write_trylock(&mm->mmap_sem))
+		goto err_down_write_mmap_sem_failed;
 	vma = binder_alloc_get_vma(alloc);
-	if (vma) {
-		if (!mmget_not_zero(alloc->vma_vm_mm))
-			goto err_mmget;
-		mm = alloc->vma_vm_mm;
-		if (!down_write_trylock(&mm->mmap_sem))
-			goto err_down_write_mmap_sem_failed;
-	}
 
 	list_lru_isolate(lru, item);
 	spin_unlock(lock);
@@ -965,10 +964,9 @@ enum lru_status binder_alloc_free_page(s
 			       PAGE_SIZE);
 
 		trace_binder_unmap_user_end(alloc, index);
-
-		up_write(&mm->mmap_sem);
-		mmput(mm);
 	}
+	up_write(&mm->mmap_sem);
+	mmput(mm);
 
 	trace_binder_unmap_kernel_start(alloc, index);
 

[PATCH 4.14 69/69] media: uvcvideo: Fix uvc_alloc_entity() allocation alignment

[Greg Kroah-Hartman]

From: Nadav Amit <namit@vmware.com>

commit 89dd34caf73e28018c58cd193751e41b1f8bdc56 upstream.

The use of ALIGN() in uvc_alloc_entity() is incorrect, since the size of
(entity->pads) is not a power of two. As a stop-gap, until a better
solution is adapted, use roundup() instead.

Found by a static assertion. Compile-tested only.

Fixes: 4ffc2d89f38a ("uvcvideo: Register subdevices for each entity")

Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/uvc/uvc_driver.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -903,7 +903,7 @@ static struct uvc_entity *uvc_alloc_enti
 	unsigned int size;
 	unsigned int i;
 
-	extra_size = ALIGN(extra_size, sizeof(*entity->pads));
+	extra_size = roundup(extra_size, sizeof(*entity->pads));
 	num_inputs = (type & UVC_TERM_OUTPUT) ? num_pads : num_pads - 1;
 	size = sizeof(*entity) + extra_size + sizeof(*entity->pads) * num_pads
 	     + num_inputs;

Re: [PATCH 4.14 00/69] 4.14.124-stable review

[Guenter Roeck]

On Fri, Jun 07, 2019 at 05:38:41PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.124 release.
> There are 69 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun 09 Jun 2019 03:37:08 PM UTC.
> Anything received after that time might be too late.
>

fs/btrfs/inode.c: In function 'btrfs_add_link':
fs/btrfs/inode.c:6590:27: error: invalid initializer
   struct timespec64 now = current_time(&parent_inode->vfs_inode);
                           ^~~~~~~~~~~~
fs/btrfs/inode.c:6592:35: error: incompatible types when assigning to type 'struct timespec' from type 'struct timespec64'
   parent_inode->vfs_inode.i_mtime = now;
                                   ^
fs/btrfs/inode.c:6593:35: error: incompatible types when assigning to type 'struct timespec' from type 'struct timespec64'
   parent_inode->vfs_inode.i_ctime = now;
                                   ^

Guenter

Re: [PATCH 4.14 00/69] 4.14.124-stable review

[Greg Kroah-Hartman]

On Fri, Jun 07, 2019 at 09:11:02AM -0700, Guenter Roeck wrote:
> On Fri, Jun 07, 2019 at 05:38:41PM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.14.124 release.
> > There are 69 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun 09 Jun 2019 03:37:08 PM UTC.
> > Anything received after that time might be too late.
> >
> 
> fs/btrfs/inode.c: In function 'btrfs_add_link':
> fs/btrfs/inode.c:6590:27: error: invalid initializer
>    struct timespec64 now = current_time(&parent_inode->vfs_inode);
>                            ^~~~~~~~~~~~
> fs/btrfs/inode.c:6592:35: error: incompatible types when assigning to type 'struct timespec' from type 'struct timespec64'
>    parent_inode->vfs_inode.i_mtime = now;
>                                    ^
> fs/btrfs/inode.c:6593:35: error: incompatible types when assigning to type 'struct timespec' from type 'struct timespec64'
>    parent_inode->vfs_inode.i_ctime = now;
>                                    ^

What arch?  This builds for me here.  odd...

greg k-h

Re: [PATCH 4.14 00/69] 4.14.124-stable review

[Guenter Roeck]

On Fri, Jun 07, 2019 at 06:16:27PM +0200, Greg Kroah-Hartman wrote:
> On Fri, Jun 07, 2019 at 09:11:02AM -0700, Guenter Roeck wrote:
> > On Fri, Jun 07, 2019 at 05:38:41PM +0200, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 4.14.124 release.
> > > There are 69 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > > 
> > > Responses should be made by Sun 09 Jun 2019 03:37:08 PM UTC.
> > > Anything received after that time might be too late.
> > >
> > 
> > fs/btrfs/inode.c: In function 'btrfs_add_link':
> > fs/btrfs/inode.c:6590:27: error: invalid initializer
> >    struct timespec64 now = current_time(&parent_inode->vfs_inode);
> >                            ^~~~~~~~~~~~
> > fs/btrfs/inode.c:6592:35: error: incompatible types when assigning to type 'struct timespec' from type 'struct timespec64'
> >    parent_inode->vfs_inode.i_mtime = now;
> >                                    ^
> > fs/btrfs/inode.c:6593:35: error: incompatible types when assigning to type 'struct timespec' from type 'struct timespec64'
> >    parent_inode->vfs_inode.i_ctime = now;
> >                                    ^
> 
> What arch?  This builds for me here.  odd...
> 

arm, i386, m68k, mips, parisc, xtensa, ppc, sh4

It was originally seen with v4.14.123-69-gcc46c1204f89 last night,
but I confirmed that v4.14.123-70-g94c5316fb246 is still affected.

Guenter

Re: [PATCH 4.14 00/69] 4.14.124-stable review

[Greg Kroah-Hartman]

On Fri, Jun 07, 2019 at 09:27:22AM -0700, Guenter Roeck wrote:
> On Fri, Jun 07, 2019 at 06:16:27PM +0200, Greg Kroah-Hartman wrote:
> > On Fri, Jun 07, 2019 at 09:11:02AM -0700, Guenter Roeck wrote:
> > > On Fri, Jun 07, 2019 at 05:38:41PM +0200, Greg Kroah-Hartman wrote:
> > > > This is the start of the stable review cycle for the 4.14.124 release.
> > > > There are 69 patches in this series, all will be posted as a response
> > > > to this one.  If anyone has any issues with these being applied, please
> > > > let me know.
> > > > 
> > > > Responses should be made by Sun 09 Jun 2019 03:37:08 PM UTC.
> > > > Anything received after that time might be too late.
> > > >
> > > 
> > > fs/btrfs/inode.c: In function 'btrfs_add_link':
> > > fs/btrfs/inode.c:6590:27: error: invalid initializer
> > >    struct timespec64 now = current_time(&parent_inode->vfs_inode);
> > >                            ^~~~~~~~~~~~
> > > fs/btrfs/inode.c:6592:35: error: incompatible types when assigning to type 'struct timespec' from type 'struct timespec64'
> > >    parent_inode->vfs_inode.i_mtime = now;
> > >                                    ^
> > > fs/btrfs/inode.c:6593:35: error: incompatible types when assigning to type 'struct timespec' from type 'struct timespec64'
> > >    parent_inode->vfs_inode.i_ctime = now;
> > >                                    ^
> > 
> > What arch?  This builds for me here.  odd...
> > 
> 
> arm, i386, m68k, mips, parisc, xtensa, ppc, sh4
> 
> It was originally seen with v4.14.123-69-gcc46c1204f89 last night,
> but I confirmed that v4.14.123-70-g94c5316fb246 is still affected.

Ok, let me dig into this after dinner, I think it's due to the
timespec64 change that happened before 4.19 (where this error is not
showing up...)

thanks,

greg k-h

Re: [PATCH 4.14 00/69] 4.14.124-stable review

[Ben Hutchings]

On Fri, 2019-06-07 at 09:27 -0700, Guenter Roeck wrote:
> On Fri, Jun 07, 2019 at 06:16:27PM +0200, Greg Kroah-Hartman wrote:
> > On Fri, Jun 07, 2019 at 09:11:02AM -0700, Guenter Roeck wrote:
> > > On Fri, Jun 07, 2019 at 05:38:41PM +0200, Greg Kroah-Hartman wrote:
> > > > This is the start of the stable review cycle for the 4.14.124 release.
> > > > There are 69 patches in this series, all will be posted as a response
> > > > to this one.  If anyone has any issues with these being applied, please
> > > > let me know.
> > > > 
> > > > Responses should be made by Sun 09 Jun 2019 03:37:08 PM UTC.
> > > > Anything received after that time might be too late.
> > > > 
> > > 
> > > fs/btrfs/inode.c: In function 'btrfs_add_link':
> > > fs/btrfs/inode.c:6590:27: error: invalid initializer
> > >    struct timespec64 now = current_time(&parent_inode->vfs_inode);
> > >                            ^~~~~~~~~~~~

For 4.14 the type of "now" should be struct timespec.

> > > fs/btrfs/inode.c:6592:35: error: incompatible types when assigning to type 'struct timespec' from type 'struct timespec64'
> > >    parent_inode->vfs_inode.i_mtime = now;
> > >                                    ^
> > > fs/btrfs/inode.c:6593:35: error: incompatible types when assigning to type 'struct timespec' from type 'struct timespec64'
> > >    parent_inode->vfs_inode.i_ctime = now;
> > >                                    ^
> > 
> > What arch?  This builds for me here.  odd...
> > 
> 
> arm, i386, m68k, mips, parisc, xtensa, ppc, sh4
> 
> It was originally seen with v4.14.123-69-gcc46c1204f89 last night,
> but I confirmed that v4.14.123-70-g94c5316fb246 is still affected.

All 32-bit architectures are affected; on 64-bit architectures
timespec64 is a macro expanding to timespec.

Ben. 

-- 
Ben Hutchings, Software Developer                         Codethink Ltd
https://www.codethink.co.uk/                 Dale House, 35 Dale Street
                                     Manchester, M1 2HF, United Kingdom

Re: [PATCH 4.14 00/69] 4.14.124-stable review

[Guenter Roeck]

On Fri, Jun 07, 2019 at 06:32:03PM +0200, Greg Kroah-Hartman wrote:
> On Fri, Jun 07, 2019 at 09:27:22AM -0700, Guenter Roeck wrote:
> > On Fri, Jun 07, 2019 at 06:16:27PM +0200, Greg Kroah-Hartman wrote:
> > > On Fri, Jun 07, 2019 at 09:11:02AM -0700, Guenter Roeck wrote:
> > > > On Fri, Jun 07, 2019 at 05:38:41PM +0200, Greg Kroah-Hartman wrote:
> > > > > This is the start of the stable review cycle for the 4.14.124 release.
> > > > > There are 69 patches in this series, all will be posted as a response
> > > > > to this one.  If anyone has any issues with these being applied, please
> > > > > let me know.
> > > > > 
> > > > > Responses should be made by Sun 09 Jun 2019 03:37:08 PM UTC.
> > > > > Anything received after that time might be too late.
> > > > >
> > > > 
> > > > fs/btrfs/inode.c: In function 'btrfs_add_link':
> > > > fs/btrfs/inode.c:6590:27: error: invalid initializer
> > > >    struct timespec64 now = current_time(&parent_inode->vfs_inode);
> > > >                            ^~~~~~~~~~~~
> > > > fs/btrfs/inode.c:6592:35: error: incompatible types when assigning to type 'struct timespec' from type 'struct timespec64'
> > > >    parent_inode->vfs_inode.i_mtime = now;
> > > >                                    ^
> > > > fs/btrfs/inode.c:6593:35: error: incompatible types when assigning to type 'struct timespec' from type 'struct timespec64'
> > > >    parent_inode->vfs_inode.i_ctime = now;
> > > >                                    ^
> > > 
> > > What arch?  This builds for me here.  odd...
> > > 
> > 
> > arm, i386, m68k, mips, parisc, xtensa, ppc, sh4
> > 
> > It was originally seen with v4.14.123-69-gcc46c1204f89 last night,
> > but I confirmed that v4.14.123-70-g94c5316fb246 is still affected.
> 
> Ok, let me dig into this after dinner, I think it's due to the
> timespec64 change that happened before 4.19 (where this error is not
> showing up...)
> 

Quite likely. Note that more architectures may be affected - I don't build
btrfs for each architecture, only for architectures where allmodconfig
is error-free and for architectures supported by qemu.

Guenter

Re: [PATCH 4.14 00/69] 4.14.124-stable review

[kernelci.org bot]

stable-rc/linux-4.14.y boot: 118 boots: 0 failed, 108 passed with 10 offline (v4.14.123-69-gcc46c1204f89)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.14.y/kernel/v4.14.123-69-gcc46c1204f89/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.14.y/kernel/v4.14.123-69-gcc46c1204f89/

Tree: stable-rc
Branch: linux-4.14.y
Git Describe: v4.14.123-69-gcc46c1204f89
Git Commit: cc46c1204f89505a33f1fb42e719ae0c8586cb68
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 63 unique boards, 23 SoC families, 14 builds out of 201

Offline Platforms:

arm:

    bcm2835_defconfig:
        gcc-8
            bcm2835-rpi-b: 1 offline lab

    sama5_defconfig:
        gcc-8
            at91-sama5d4_xplained: 1 offline lab

    multi_v7_defconfig:
        gcc-8
            alpine-db: 1 offline lab
            at91-sama5d4_xplained: 1 offline lab
            socfpga_cyclone5_de0_sockit: 1 offline lab
            sun5i-r8-chip: 1 offline lab

    sunxi_defconfig:
        gcc-8
            sun5i-r8-chip: 1 offline lab

arm64:

    defconfig:
        gcc-8
            apq8016-sbc: 1 offline lab
            juno-r2: 1 offline lab
            mt7622-rfb1: 1 offline lab

---
For more info write to <info@kernelci.org>

Re: [PATCH 4.14 00/69] 4.14.124-stable review

[Naresh Kamboju]

On Fri, 7 Jun 2019 at 21:10, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.14.124 release.
> There are 69 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun 09 Jun 2019 03:37:08 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.124-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

compile kernel module failed for arm and i386.

> Filipe Manana <fdmanana@suse.com>
>     Btrfs: incremental send, fix file corruption when no-holes feature is enabled
>
> Filipe Manana <fdmanana@suse.com>
>     Btrfs: fix fsync not persisting changed attributes of a directory
>
> Filipe Manana <fdmanana@suse.com>
>     Btrfs: fix race updating log root item during fsync
>
> Filipe Manana <fdmanana@suse.com>
>     Btrfs: fix wrong ctime and mtime of a directory after log replay

fs/btrfs/inode.c: In function 'btrfs_add_link':
fs/btrfs/inode.c:6590:27: error: invalid initializer
  struct timespec64 now = current_time(&parent_inode->vfs_inode);
                          ^~~~~~~~~~~~
fs/btrfs/inode.c:6592:35: error: incompatible types when assigning to
type 'struct timespec' from type 'struct timespec64'
  parent_inode->vfs_inode.i_mtime = now;
                                  ^
fs/btrfs/inode.c:6593:35: error: incompatible types when assigning to
type 'struct timespec' from type 'struct timespec64'
  parent_inode->vfs_inode.i_ctime = now;
                                  ^

Full build log link,
https://ci.linaro.org/job/openembedded-lkft-linux-stable-rc-4.14/487/DISTRO=lkft,MACHINE=intel-core2-32,label=docker-lkft/consoleText

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.14 00/69] 4.14.124-stable review

[Greg Kroah-Hartman]

On Fri, Jun 07, 2019 at 05:35:09PM +0100, Ben Hutchings wrote:
> On Fri, 2019-06-07 at 09:27 -0700, Guenter Roeck wrote:
> > On Fri, Jun 07, 2019 at 06:16:27PM +0200, Greg Kroah-Hartman wrote:
> > > On Fri, Jun 07, 2019 at 09:11:02AM -0700, Guenter Roeck wrote:
> > > > On Fri, Jun 07, 2019 at 05:38:41PM +0200, Greg Kroah-Hartman wrote:
> > > > > This is the start of the stable review cycle for the 4.14.124 release.
> > > > > There are 69 patches in this series, all will be posted as a response
> > > > > to this one.  If anyone has any issues with these being applied, please
> > > > > let me know.
> > > > > 
> > > > > Responses should be made by Sun 09 Jun 2019 03:37:08 PM UTC.
> > > > > Anything received after that time might be too late.
> > > > > 
> > > > 
> > > > fs/btrfs/inode.c: In function 'btrfs_add_link':
> > > > fs/btrfs/inode.c:6590:27: error: invalid initializer
> > > >    struct timespec64 now = current_time(&parent_inode->vfs_inode);
> > > >                            ^~~~~~~~~~~~
> 
> For 4.14 the type of "now" should be struct timespec.
> 
> > > > fs/btrfs/inode.c:6592:35: error: incompatible types when assigning to type 'struct timespec' from type 'struct timespec64'
> > > >    parent_inode->vfs_inode.i_mtime = now;
> > > >                                    ^
> > > > fs/btrfs/inode.c:6593:35: error: incompatible types when assigning to type 'struct timespec' from type 'struct timespec64'
> > > >    parent_inode->vfs_inode.i_ctime = now;
> > > >                                    ^
> > > 
> > > What arch?  This builds for me here.  odd...
> > > 
> > 
> > arm, i386, m68k, mips, parisc, xtensa, ppc, sh4
> > 
> > It was originally seen with v4.14.123-69-gcc46c1204f89 last night,
> > but I confirmed that v4.14.123-70-g94c5316fb246 is still affected.
> 
> All 32-bit architectures are affected; on 64-bit architectures
> timespec64 is a macro expanding to timespec.

Thanks, I've made this fix now.  Will go push out a -rc2 with it in it.

greg k-h

Re: [PATCH 4.14 00/69] 4.14.124-stable review

[Greg Kroah-Hartman]

On Fri, Jun 07, 2019 at 05:38:41PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.124 release.
> There are 69 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun 09 Jun 2019 03:37:08 PM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.124-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.

-rc2 is out, to hopefully resolve the btrfs 32bit build failure:
 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.124-rc2.gz

thanks,

greg k-h

Re: [PATCH 4.14 00/69] 4.14.124-stable review

[Guenter Roeck]

On 6/7/19 8:38 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.124 release.
> There are 69 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun 09 Jun 2019 03:37:08 PM UTC.
> Anything received after that time might be too late.
> 

Build results:
	total: 172 pass: 172 fail: 0
Qemu test results:
	total: 333 pass: 333 fail: 0

Guenter

Re: [PATCH 4.14 00/69] 4.14.124-stable review

[Naresh Kamboju]

On Sat, 8 Jun 2019 at 15:03, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> On Fri, Jun 07, 2019 at 05:38:41PM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.14.124 release.
> > There are 69 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun 09 Jun 2019 03:37:08 PM UTC.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >       https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.124-rc1.gz
> > or in the git tree and branch at:
> >       git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> > and the diffstat can be found below.
>
> -rc2 is out, to hopefully resolve the btrfs 32bit build failure:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.124-rc2.gz

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

NOTE:
selftest sources version updated to 5.1
Following test cases reported pass after upgrade
  kselftest:
    * bpf_test_libbpf.sh
    * net_ip_defrag.sh
Few kselftest test cases reported failure and we are investigating.

LTP version upgrade to 20190517

Summary
------------------------------------------------------------------------

kernel: 4.14.124-rc2
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: 396e28a10fffc503c28b113c1e867b8e3684a98a
git describe: v4.14.123-70-g396e28a10fff
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.123-70-g396e28a10fff

No regressions (compared to build v4.14.123)

Fixes (compared to build v4.14.123)
------------------------------------------------------------------------
  kselftest:
    * bpf_test_libbpf.sh
    * net_ip_defrag.sh

Ran 22140 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* network-basic-tests
* v4l2-compliance
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.14 00/69] 4.14.124-stable review

[Greg Kroah-Hartman]

On Sun, Jun 09, 2019 at 12:36:23AM +0530, Naresh Kamboju wrote:
> On Sat, 8 Jun 2019 at 15:03, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > On Fri, Jun 07, 2019 at 05:38:41PM +0200, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 4.14.124 release.
> > > There are 69 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Sun 09 Jun 2019 03:37:08 PM UTC.
> > > Anything received after that time might be too late.
> > >
> > > The whole patch series can be found in one patch at:
> > >       https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.124-rc1.gz
> > > or in the git tree and branch at:
> > >       git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> > > and the diffstat can be found below.
> >
> > -rc2 is out, to hopefully resolve the btrfs 32bit build failure:
> >         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.124-rc2.gz
> 
> Results from Linaro’s test farm.
> No regressions on arm64, arm, x86_64, and i386.
> 
> NOTE:
> selftest sources version updated to 5.1
> Following test cases reported pass after upgrade
>   kselftest:
>     * bpf_test_libbpf.sh
>     * net_ip_defrag.sh
> Few kselftest test cases reported failure and we are investigating.
> 
> LTP version upgrade to 20190517

Great, thanks for testing!

greg k-h