From: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
To: mpe@ellerman.id.au
Cc: mikey@neuling.org, benh@kernel.crashing.org, paulus@samba.org,
npiggin@gmail.com, christophe.leroy@c-s.fr,
mahesh@linux.vnet.ibm.com, linuxppc-dev@lists.ozlabs.org,
linux-kernel@vger.kernel.org, naveen.n.rao@linux.vnet.ibm.com
Subject: [PATCH RESEND] Powerpc/Watchpoint: Restore nvgprs while returning from exception
Date: Tue, 11 Jun 2019 09:04:47 +0530 [thread overview]
Message-ID: <20190611033447.28815-1-ravi.bangoria@linux.ibm.com> (raw)
In-Reply-To: <a2696037-539c-2f37-3b2f-7288a58fbfe7@linux.ibm.com>
Powerpc hw triggers watchpoint before executing the instruction. To
make trigger-after-execute behavior, kernel emulates the instruction.
If the instruction is 'load something into non-volatile register',
exception handler should restore emulated register state while
returning back, otherwise there will be register state corruption.
Ex, Adding a watchpoint on a list can corrput the list:
# cat /proc/kallsyms | grep kthread_create_list
c00000000121c8b8 d kthread_create_list
Add watchpoint on kthread_create_list->prev:
# perf record -e mem:0xc00000000121c8c0
Run some workload such that new kthread gets invoked. Ex, I just
logged out from console:
list_add corruption. next->prev should be prev (c000000001214e00), \
but was c00000000121c8b8. (next=c00000000121c8b8).
WARNING: CPU: 59 PID: 309 at lib/list_debug.c:25 __list_add_valid+0xb4/0xc0
CPU: 59 PID: 309 Comm: kworker/59:0 Kdump: loaded Not tainted 5.1.0-rc7+ #69
...
NIP __list_add_valid+0xb4/0xc0
LR __list_add_valid+0xb0/0xc0
Call Trace:
__list_add_valid+0xb0/0xc0 (unreliable)
__kthread_create_on_node+0xe0/0x260
kthread_create_on_node+0x34/0x50
create_worker+0xe8/0x260
worker_thread+0x444/0x560
kthread+0x160/0x1a0
ret_from_kernel_thread+0x5c/0x70
List corruption happened because it uses 'load into non-volatile
register' instruction:
Snippet from __kthread_create_on_node:
c000000000136be8: addis r29,r2,-19
c000000000136bec: ld r29,31424(r29)
if (!__list_add_valid(new, prev, next))
c000000000136bf0: mr r3,r30
c000000000136bf4: mr r5,r28
c000000000136bf8: mr r4,r29
c000000000136bfc: bl c00000000059a2f8 <__list_add_valid+0x8>
Register state from WARN_ON():
GPR00: c00000000059a3a0 c000007ff23afb50 c000000001344e00 0000000000000075
GPR04: 0000000000000000 0000000000000000 0000001852af8bc1 0000000000000000
GPR08: 0000000000000001 0000000000000007 0000000000000006 00000000000004aa
GPR12: 0000000000000000 c000007ffffeb080 c000000000137038 c000005ff62aaa00
GPR16: 0000000000000000 0000000000000000 c000007fffbe7600 c000007fffbe7370
GPR20: c000007fffbe7320 c000007fffbe7300 c000000001373a00 0000000000000000
GPR24: fffffffffffffef7 c00000000012e320 c000007ff23afcb0 c000000000cb8628
GPR28: c00000000121c8b8 c000000001214e00 c000007fef5b17e8 c000007fef5b17c0
Watchpoint hit at 0xc000000000136bec.
addis r29,r2,-19
=> r29 = 0xc000000001344e00 + (-19 << 16)
=> r29 = 0xc000000001214e00
ld r29,31424(r29)
=> r29 = *(0xc000000001214e00 + 31424)
=> r29 = *(0xc00000000121c8c0)
0xc00000000121c8c0 is where we placed a watchpoint and thus this
instruction was emulated by emulate_step. But because handle_dabr_fault
did not restore emulated register state, r29 still contains stale
value in above register state.
Fixes: 5aae8a5370802 ("powerpc, hw_breakpoints: Implement hw_breakpoints for 64-bit server processors")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: stable@vger.kernel.org # 2.6.36+
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
---
arch/powerpc/kernel/exceptions-64s.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 6b86055e5251..0e649d980ec3 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1761,7 +1761,7 @@ handle_dabr_fault:
ld r5,_DSISR(r1)
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_break
-12: b ret_from_except_lite
+12: b ret_from_except
#ifdef CONFIG_PPC_BOOK3S_64
--
2.20.1
prev parent reply other threads:[~2019-06-11 3:35 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-06 7:29 [PATCH] Powerpc/Watchpoint: Restore nvgprs while returning from exception Ravi Bangoria
2019-06-06 8:21 ` Naveen N. Rao
2019-06-06 8:30 ` Ravi Bangoria
2019-06-07 0:50 ` Michael Neuling
2019-06-07 3:17 ` Ravi Bangoria
2019-06-07 5:50 ` Michael Ellerman
2019-06-07 6:26 ` Ravi Bangoria
2019-06-11 3:34 ` Ravi Bangoria [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190611033447.28815-1-ravi.bangoria@linux.ibm.com \
--to=ravi.bangoria@linux.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=christophe.leroy@c-s.fr \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mahesh@linux.vnet.ibm.com \
--cc=mikey@neuling.org \
--cc=mpe@ellerman.id.au \
--cc=naveen.n.rao@linux.vnet.ibm.com \
--cc=npiggin@gmail.com \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).