From: jassisinghbrar@gmail.com
To: dmaengine@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: vkoul@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
orito.takao@socionext.com, masami.hiramatsu@linaro.org,
kasai.kazuhiro@socionext.com,
Jassi Brar <jaswinder.singh@linaro.org>
Subject: [PATCH 1/2] dt-bindings: milbeaut-m10v-hdmac: Add Socionext Milbeaut HDMAC bindings
Date: Wed, 12 Jun 2019 19:52:37 -0500 [thread overview]
Message-ID: <20190613005237.1996-1-jassisinghbrar@gmail.com> (raw)
In-Reply-To: <20190613005109.1867-1-jassisinghbrar@gmail.com>
From: Jassi Brar <jaswinder.singh@linaro.org>
Document the devicetree bindings for Socionext Milbeaut HDMAC
controller. Controller has upto 8 floating channels, that need
a predefined slave-id to work from a set of slaves.
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
---
.../bindings/dma/milbeaut-m10v-hdmac.txt | 54 +++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
diff --git a/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt b/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
new file mode 100644
index 000000000000..a104fcb9e73d
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
@@ -0,0 +1,51 @@
+* Milbeaut AHB DMA Controller
+
+Milbeaut AHB DMA controller has transfer capability bellow.
+ - memory to memory transfer
+ - device to memory transfer
+ - memory to device transfer
+
+Required property:
+- compatible: Should be "socionext,milbeaut-m10v-hdmac"
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain all of the per-channel DMA interrupts.
+- #dma-cells: Should be 1. Specify the ID of the slave.
+- clocks: Phandle to the clock used by the HDMAC module.
+
+
+Example:
+
+ hdmac1: hdmac@1e110000 {
+ compatible = "socionext,milbeaut-m10v-hdmac";
+ reg = <0x1e110000 0x10000>;
+ interrupts = <0 132 4>,
+ <0 133 4>,
+ <0 134 4>,
+ <0 135 4>,
+ <0 136 4>,
+ <0 137 4>,
+ <0 138 4>,
+ <0 139 4>;
+ #dma-cells = <1>;
+ clocks = <&dummy_clk>;
+ };
+
+* DMA client
+
+Clients have to specify the DMA requests with phandles in a list.
+
+Required properties:
+- dmas: List of one or more DMA request specifiers. One DMA request specifier
+ consists of a phandle to the DMA controller followed by the integer
+ specifying the request line.
+- dma-names: List of string identifiers for the DMA requests. For the correct
+ names, have a look at the specific client driver.
+
+Example:
+
+ sni_spi1: spi@1e800100 {
+ ...
+ dmas = <&hdmac1 22>, <&hdmac1 21>;
+ dma-names = "tx", "rx";
+ ...
+ };
--
2.17.1
next prev parent reply other threads:[~2019-06-13 16:58 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-13 0:51 [PATCH 0/2] Add support for AHB DMA controller on Milbeaut series jassisinghbrar
2019-06-13 0:52 ` jassisinghbrar [this message]
2019-07-09 14:34 ` [PATCH 1/2] dt-bindings: milbeaut-m10v-hdmac: Add Socionext Milbeaut HDMAC bindings Rob Herring
2019-07-10 4:12 ` Jassi Brar
2019-07-10 13:48 ` Rob Herring
2019-06-13 0:52 ` [PATCH 2/2] dmaengine: milbeaut-hdmac: Add HDMAC driver for Milbeaut platforms jassisinghbrar
2019-06-24 6:44 ` Vinod Koul
2019-08-16 2:25 ` Jassi Brar
2019-08-16 4:43 ` Vinod Koul
2019-08-18 5:16 ` [PATCH v2 0/2] Add support for AHB DMA controller on Milbeaut series jassisinghbrar
2019-08-18 5:17 ` [PATCH v2 1/2] dt-bindings: milbeaut-m10v-hdmac: Add Socionext Milbeaut HDMAC bindings jassisinghbrar
2019-08-27 16:31 ` Rob Herring
2019-09-04 5:50 ` Vinod Koul
2019-09-04 6:18 ` Jassi Brar
2019-09-06 5:12 ` Vinod Koul
2019-08-18 5:18 ` [PATCH v2 2/2] dmaengine: milbeaut-hdmac: Add HDMAC driver for Milbeaut platforms jassisinghbrar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190613005237.1996-1-jassisinghbrar@gmail.com \
--to=jassisinghbrar@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=jaswinder.singh@linaro.org \
--cc=kasai.kazuhiro@socionext.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=masami.hiramatsu@linaro.org \
--cc=orito.takao@socionext.com \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).