From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.3 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_MUTT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id B65C5C31E45 for ; Thu, 13 Jun 2019 15:17:11 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 7744221473 for ; Thu, 13 Jun 2019 15:17:11 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="eeL24GRu" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1733267AbfFMPRJ (ORCPT ); Thu, 13 Jun 2019 11:17:09 -0400 Received: from mail-pg1-f195.google.com ([209.85.215.195]:36886 "EHLO mail-pg1-f195.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1732198AbfFMNXN (ORCPT ); Thu, 13 Jun 2019 09:23:13 -0400 Received: by mail-pg1-f195.google.com with SMTP id 20so10977622pgr.4 for ; Thu, 13 Jun 2019 06:23:13 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=date:from:to:cc:subject:message-id:references:mime-version :content-disposition:in-reply-to:user-agent; bh=MaIyElzKL5RKMB8l9eySyc6lvUx5AGZ+HAJN95Nni9U=; b=eeL24GRuf0+MT9gvXofIXXhK7ay/UZyh8gEHofspIt995zp3HPNqaRQQmrDCUU69cN XLktcycXvXzNiLNN8t3c44g7ZCw3CbG7oIB39WPpYsjUT2NP/XaVZuetpmjGibHiODOD rpAHaEewjHTAn0HtU8ikObP/RAKKVEollnmdnV/9EqfZC3icbr+cYbLIsutFWZ7yCllV PwwRBV6b8Bf9/4nIUrg1OBQmCFT/EnvwFPZWUjVBOyLcURPoJNW998Bde1Pmh0uLl/Hv ftyKXCfebsas+zt8tLdYaQCKzb1OcAFF3Vl1txUq2/06oN1+9Kt04t0RfqTlylAIyBU1 SSzA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to:user-agent; bh=MaIyElzKL5RKMB8l9eySyc6lvUx5AGZ+HAJN95Nni9U=; b=fTFz/iCw3AppFL+hnn8bUC0eIZD9XJxfBY5/RhOzo4Qne5kImfRVX+y/CvR1ZtW851 aQdgganYkWcBeoG2NTE83LOvnik6EAOHy4UeRNpCHfMlfHAkbia1y6zOaX1yHtAM+POg qG3OJmk1fzJkpACfI2Vfi7jPdpVvwwFYtAfOmFEuO+vcipNuE7CTMXcaS+HkwWg94ttL nutU1qKDFLT57jvrxn+BD4X4FNPF5+ODAqZzDqJzEDRr+fvmSEM6Q7OlGRDiriCmsnS3 a0HJc3cXYh7WOqbeTIH8n0QPVGNfN4vpKt/F/gvw/dMJwbtVpFTdc6gxkYwg6X94HS9M +2sA== X-Gm-Message-State: APjAAAVrbLRO8JWR5Cvi8nFDZvXoZ/J+BTt8d5/ifvjfRdcCBdbsy2EA n4wKQ2rDxKarrtUs/DBNfQ6D X-Google-Smtp-Source: APXvYqyFmMCW0hVXmZ1u+Axd9A96fVJqu6PJ3yff+WZbb+5Sz4BnH+MEtpVu3O3hzTg6ht6anJ4uhg== X-Received: by 2002:a17:90a:2627:: with SMTP id l36mr5745282pje.71.1560432192614; Thu, 13 Jun 2019 06:23:12 -0700 (PDT) Received: from Mani-XPS-13-9360 ([2405:204:7141:4858:bdd9:1134:3bdd:7ab4]) by smtp.gmail.com with ESMTPSA id f88sm3311pjg.5.2019.06.13.06.23.05 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256); Thu, 13 Jun 2019 06:23:11 -0700 (PDT) Date: Thu, 13 Jun 2019 18:53:01 +0530 From: Manivannan Sadhasivam To: Shawn Guo Cc: s.hauer@pengutronix.de, robh+dt@kernel.org, festevam@gmail.com, kernel@pengutronix.de, linux-imx@nxp.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, pbrobinson@gmail.com, yossi@novtech.com, nazik@novtech.com Subject: Re: [PATCH 2/2] ARM: dts: Add support for 96Boards Meerkat96 board Message-ID: <20190613132301.GB22171@Mani-XPS-13-9360> References: <20190522131550.9034-1-manivannan.sadhasivam@linaro.org> <20190522131550.9034-3-manivannan.sadhasivam@linaro.org> <20190603121710.GB15919@dragon> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20190603121710.GB15919@dragon> User-Agent: Mutt/1.9.4 (2018-02-28) Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Shawn, On Mon, Jun 03, 2019 at 08:17:17PM +0800, Shawn Guo wrote: > On Wed, May 22, 2019 at 06:45:50PM +0530, Manivannan Sadhasivam wrote: > > Add devicetree support for 96Boards Meerkat96 board from Novtech. This > > board is one of the Consumer Edition boards of the 96Boards family based > > on i.MX7D SoC. Following are the currently supported features of the > > board: > > > > * uSD > > * WiFi/BT > > * USB > > > > More information about this board can be found in 96Boards product page: > > https://www.96boards.org/product/imx7-96/ > > > > Signed-off-by: Manivannan Sadhasivam > > --- > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/imx7d-meerkat96.dts | 396 ++++++++++++++++++++++++++ > > 2 files changed, 397 insertions(+) > > create mode 100644 arch/arm/boot/dts/imx7d-meerkat96.dts > > > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > index f4f5aeaf3298..3018a763dbd1 100644 > > --- a/arch/arm/boot/dts/Makefile > > +++ b/arch/arm/boot/dts/Makefile > > @@ -579,6 +579,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ > > imx7d-cl-som-imx7.dtb \ > > imx7d-colibri-emmc-eval-v3.dtb \ > > imx7d-colibri-eval-v3.dtb \ > > + imx7d-meerkat96.dtb \ > > imx7d-nitrogen7.dtb \ > > imx7d-pico-hobbit.dtb \ > > imx7d-pico-pi.dtb \ > > diff --git a/arch/arm/boot/dts/imx7d-meerkat96.dts b/arch/arm/boot/dts/imx7d-meerkat96.dts > > new file mode 100644 > > index 000000000000..7898d27340f6 > > --- /dev/null > > +++ b/arch/arm/boot/dts/imx7d-meerkat96.dts > > @@ -0,0 +1,396 @@ > > +// SPDX-License-Identifier: GPL-2.0+ OR MIT > > +/* > > + * Copyright (C) 2019 Linaro Ltd. > > + */ > > + > > +/dts-v1/; > > + > > +#include "imx7d.dtsi" > > + > > +/ { > > + model = "96Boards Meerkat96 Board"; > > + compatible = "novtech,imx7d-meerkat96", "fsl,imx7d"; > > + > > + chosen { > > + stdout-path = &uart6; > > + }; > > + > > + memory@80000000 { > > + device_type = "memory"; > > + reg = <0x80000000 0x20000000>; /* 512MB */ > > + }; > > + > > + reg_wlreg_on: regulator-wlreg_on { > > Use hyphen consistently in node name: regulator-wlreg-on > Ack > > + compatible = "regulator-fixed"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_wlreg_on>; > > + regulator-name = "wlreg_on"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + startup-delay-us = <100>; > > + gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; > > + enable-active-high; > > + regulator-always-on; > > + }; > > + > > + reg_3p3v: regulator-3p3v { > > + compatible = "regulator-fixed"; > > + regulator-name = "3P3V"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-always-on; > > + }; > > + > > + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { > > + compatible = "regulator-fixed"; > > + regulator-name = "usb_otg1_vbus"; > > + regulator-min-microvolt = <5000000>; > > + regulator-max-microvolt = <5000000>; > > + }; > > + > > + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { > > + compatible = "regulator-fixed"; > > + regulator-name = "usb_otg2_vbus"; > > + regulator-min-microvolt = <5000000>; > > + regulator-max-microvolt = <5000000>; > > + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; > > + enable-active-high; > > + }; > > + > > + sw1a_reg: sw1a { > > + regulator-name = "sw1a_reg"; > > Is it a fixed regulator or what? > yep, missed the compatible. will add it. > > + regulator-min-microvolt = <700000>; > > + regulator-max-microvolt = <1475000>; > > + regulator-boot-on; > > + regulator-always-on; > > + regulator-ramp-delay = <6250>; > > + }; > > + > > + leds { > > + compatible = "gpio-leds"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_gpio_leds>; > > + > > + led1 { > > + label = "green:user1"; > > + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; > > + linux,default-trigger = "heartbeat"; > > + default-state = "off"; > > + }; > > + > > + led2 { > > + label = "green:user2"; > > + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; > > + linux,default-trigger = "mmc0"; > > + default-state = "off"; > > + }; > > + > > + led3 { > > + label = "green:user3"; > > + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; > > + linux,default-trigger = "mmc1"; > > + default-state = "off"; > > + }; > > + > > + led4 { > > + label = "green:user4"; > > + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; > > + linux,default-trigger = "none"; > > + default-state = "off"; > > + panic-indicator; > > + }; > > + > > + led@5 { > > led5 > Ack > > + label = "yellow:wlan"; > > + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; > > + linux,default-trigger = "phy0tx"; > > + default-state = "off"; > > + }; > > + > > + led@6 { > > led6 > Ack > > + label = "blue:bt"; > > + gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; > > + linux,default-trigger = "bluetooth-power"; > > + default-state = "off"; > > + }; > > + }; > > +}; > > + > > +&cpu0 { > > + cpu-supply = <&sw1a_reg>; > > +}; > > + > > +&i2c1 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_i2c1>; > > + status = "okay"; > > +}; > > + > > +&i2c2 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_i2c2>; > > + status = "okay"; > > +}; > > + > > +&i2c3 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_i2c3>; > > + status = "okay"; > > +}; > > + > > +&i2c4 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_i2c4>; > > + status = "okay"; > > +}; > > + > > +&lcdif { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_lcdif>; > > + status = "okay"; > > +}; > > + > > +&uart1 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_uart1>; > > + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; > > + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; > > + status = "okay"; > > +}; > > + > > +&uart3 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_uart3>; > > + assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; > > + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; > > + fsl,uart-has-rtscts; > > fsl,uart-has-rtscts is deprecated, should use uart-has-rtscts instead. > Okay > > + status = "okay"; > > +}; > > + > > +&uart6 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_uart6>; > > + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; > > + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; > > + status = "okay"; > > +}; > > + > > +&uart7 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_uart7 &pinctrl_bt_gpios>; > > + assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>; > > + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; > > + fsl,uart-has-rtscts; > > Ditto > Okay > > + fsl,dte-mode; > > + status = "okay"; > > + > > + bluetooth { > > + compatible = "brcm,bcm43438-bt"; > > + device-wakeup-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; > > + host-wakeup-gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; > > + }; > > +}; > > + > > +&usbotg1 { > > + vbus-supply = <®_usb_otg1_vbus>; > > + status = "okay"; > > +}; > > + > > +&usbotg2 { > > + vbus-supply = <®_usb_otg2_vbus>; > > + dr_mode = "host"; > > + status = "okay"; > > +}; > > + > > +&usdhc1 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_usdhc1>; > > + keep-power-in-suspend; > > + tuning-step = <2>; > > + vmmc-supply = <®_3p3v>; > > + no-1-8-v; > > + broken-cd; > > + status = "okay"; > > +}; > > + > > +&usdhc3 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_usdhc3>; > > + bus-width = <4>; > > + no-1-8-v; > > + no-mmc; > > + non-removable; > > + keep-power-in-suspend; > > + enable-sdio-wakeup; > > Should use 'wakeup-source'. See bindings/power/wakeup-source.txt. > Okay > > + vmmc-supply = <®_wlreg_on>; > > + vqmmc-supply =<®_3p3v>; > > + status = "okay"; > > + > > + brcmf: wifi@1 { > > + reg = <1>; > > + compatible = "brcm,bcm4329-fmac"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_wlan_irq>; > > + interrupt-parent = <&gpio6>; > > + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-names = "host-wake"; > > + }; > > +}; > > + > > +&iomuxc { > > + imx7d-sdb { > > This container node is unnecessary now, and can be dropped to save one > level of indentation. > Ah, thanks for the info. It really got stretched... > > + pinctrl_bt_gpios: bt_gpios { > > Please name these pinctrl group node more consistently, something like > below: > > pinctrl_xxx: xxxgrp { > ... > }; > > Also keep them alphabetically sorted. > Okay > > + fsl,pins = < > > + MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x59 > > + MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x1f > > + >; > > + }; > > + > > + pinctrl_i2c1: i2c1grp { > > + fsl,pins = < > > + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f > > + MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f > > + >; > > + }; > > + > > + pinctrl_i2c2: i2c2grp { > > + fsl,pins = < > > + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f > > + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f > > + >; > > + }; > > + > > + pinctrl_i2c3: i2c3grp { > > + fsl,pins = < > > + MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA 0x4000007f > > + MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL 0x4000007f > > + >; > > + }; > > + > > + pinctrl_i2c4: i2c4grp { > > + fsl,pins = < > > + MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f > > + MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f > > + >; > > + }; > > + > > + pinctrl_lcdif: lcdifgrp { > > + fsl,pins = < > > + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 > > + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 > > + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 > > + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 > > + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 > > + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 > > + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 > > + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 > > + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 > > + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 > > + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 > > + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 > > + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 > > + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 > > + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 > > + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 > > + MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 > > + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 > > + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 > > + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 > > + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 > > + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 > > + MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 > > + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 > > + MX7D_PAD_LCD_CLK__LCD_CLK 0x79 > > + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 > > + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 > > + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 > > + MX7D_PAD_LCD_RESET__LCD_RESET 0x79 > > + >; > > + }; > > + > > + pinctrl_gpio_leds: gpioledsgrp { > > + fsl,pins = < > > + MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59 > > + MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x59 > > + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x59 > > + MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x59 > > + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x59 > > + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 > > + >; > > + }; > > + > > + pinctrl_tda998x: hdmigrp-1 { > > Unused? Maybe add it later when needed. > yeah, no hdmi support as of now. Will add it later. Thanks, Mani > Shawn > > > + fsl,pins = < > > + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x59 > > + >; > > + }; > > + > > + pinctrl_uart1: uart1grp { > > + fsl,pins = < > > + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 > > + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 > > + >; > > + }; > > + > > + pinctrl_uart3: uart3grp { > > + fsl,pins = < > > + MX7D_PAD_SD3_DATA4__UART3_DCE_RX 0x79 > > + MX7D_PAD_SD3_DATA5__UART3_DCE_TX 0x79 > > + MX7D_PAD_SD3_DATA6__UART3_DCE_RTS 0x79 > > + MX7D_PAD_SD3_DATA7__UART3_DCE_CTS 0x79 > > + >; > > + }; > > + > > + pinctrl_uart6: uart6grp { > > + fsl,pins = < > > + MX7D_PAD_SD1_CD_B__UART6_DCE_RX 0x79 > > + MX7D_PAD_SD1_WP__UART6_DCE_TX 0x79 > > + >; > > + }; > > + > > + pinctrl_uart7: uart7grp { > > + fsl,pins = < > > + MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX 0x79 > > + MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX 0x79 > > + MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS 0x79 > > + MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS 0x79 > > + >; > > + }; > > + > > + pinctrl_usdhc1: usdhc1grp { > > + fsl,pins = < > > + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 > > + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 > > + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 > > + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 > > + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 > > + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 > > + >; > > + }; > > + > > + pinctrl_usdhc3: usdhc3grp { > > + fsl,pins = < > > + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 > > + MX7D_PAD_SD3_CLK__SD3_CLK 0x0D > > + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 > > + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 > > + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 > > + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 > > + >; > > + }; > > + > > + pinctrl_wlreg_on: wlreg_on { > > + fsl,pins = < > > + MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15 0x19 > > + >; > > + }; > > + > > + pinctrl_wlan_irq: wlan_irq { > > + fsl,pins = < > > + MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 0x19 > > + >; > > + }; > > + }; > > +}; > > -- > > 2.17.1 > >