From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: linux-amlogic@lists.infradead.org, khilman@baylibre.com
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
linus.walleij@linaro.org, andrew@lunn.ch, robin.murphy@arm.com,
narmstrong@baylibre.com,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: [PATCH v3 4/4] arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line
Date: Sat, 15 Jun 2019 12:38:32 +0200 [thread overview]
Message-ID: <20190615103832.5126-5-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20190615103832.5126-1-martin.blumenstingl@googlemail.com>
The reset line of the RTL8211F PHY is routed to the GPIOZ_15 pad.
Describe this in the device tree so the PHY framework can bring the PHY
into a known state when initializing it. GPIOZ_15 doesn't support
driving the output HIGH (to take the PHY out of reset, only output LOW
to reset the PHY is supported). The datasheet states it's an "3.3V input
tolerant open drain (OD) output pin". Instead there's a pull-up resistor
on the board to take the PHY out of reset. The GPIO itself will be set
to INPUT mode to take the PHY out of reset and LOW to reset the PHY,
which is achieved with the flags (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN).
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index c3e0735e6d9f..82b42c073c5e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -250,6 +250,10 @@
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
max-speed = <1000>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
};
};
--
2.22.0
next prev parent reply other threads:[~2019-06-15 10:39 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-15 10:38 [PATCH v3 0/4] Ethernet PHY reset GPIO updates for Amlogic SoCs Martin Blumenstingl
2019-06-15 10:38 ` [PATCH v3 1/4] arm64: dts: meson: g12a: x96-max: fix the Ethernet PHY reset line Martin Blumenstingl
2019-06-15 10:38 ` [PATCH v3 2/4] ARM: dts: meson: switch to the generic Ethernet PHY reset bindings Martin Blumenstingl
2019-06-15 10:38 ` [PATCH v3 3/4] arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings Martin Blumenstingl
2019-06-15 10:38 ` Martin Blumenstingl [this message]
2019-06-20 3:35 ` [PATCH v3 0/4] Ethernet PHY reset GPIO updates for Amlogic SoCs Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190615103832.5126-5-martin.blumenstingl@googlemail.com \
--to=martin.blumenstingl@googlemail.com \
--cc=andrew@lunn.ch \
--cc=khilman@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
--cc=netdev@vger.kernel.org \
--cc=robin.murphy@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).