From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.7 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, MENTIONS_GIT_HOSTING,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED, USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id E9E74C48BD8 for ; Wed, 26 Jun 2019 09:06:57 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id A6FCC20645 for ; Wed, 26 Jun 2019 09:06:57 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=baylibre-com.20150623.gappssmtp.com header.i=@baylibre-com.20150623.gappssmtp.com header.b="ZZJawuiL" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727185AbfFZJG4 (ORCPT ); Wed, 26 Jun 2019 05:06:56 -0400 Received: from mail-wr1-f67.google.com ([209.85.221.67]:39877 "EHLO mail-wr1-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727070AbfFZJGt (ORCPT ); Wed, 26 Jun 2019 05:06:49 -0400 Received: by mail-wr1-f67.google.com with SMTP id x4so1780512wrt.6 for ; Wed, 26 Jun 2019 02:06:45 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20150623.gappssmtp.com; s=20150623; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=zkrvjVP5KfJbBQvtx56lHXB2Mc2oN9+jprC19ZcPMkA=; b=ZZJawuiL/cdAXyjymxq6zQl3OOL8TxXom1mxYyREDO/Q/QiO4E7ORx8RMTUD9YRfXz oGpaWYSQGOQ8I8YfRThW5WwmsJEQNjw6I42/0xnWH9w5kQ2kt8wPNNc9bfq+G/n/6Kd9 hcRZc0rU4HUfLaJdyC+MbHiRmyoj5NT449FAnzW7dED333XpKbGcElCyG/IFqRi1mkES SeHSvK85Hes7bzYNhKaptYkKKVWc9txD5c7Ajfh5HlmTYdmHrKj5zF5K4VmHlKGrEkaJ oO9DgEja/jj/KIwzKaapsTRUpz8BZFH+cGTw3izkQlMvw4A1QWKLzVLLt+PVmPgIvxzl 8UvA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=zkrvjVP5KfJbBQvtx56lHXB2Mc2oN9+jprC19ZcPMkA=; b=C56XuGc2B4f63w3gfvqz+UYjmzp1pa4RclFD0nMgPxhVs3IykZ60FzdTAzUqWf3fyP /MELqhnyP1STW+s/WMPukmXhWKCsSHqaGDaW1yzmHi20ee6TSfgUvWSdeM4Y9bz866t1 q5C54o6U2B4ExActC0O7Iz2BcjrVgAFaWJlE1F1ATTk9ywMUGbxD7EpyJWyCa4pIGmYD R37+WBab6KkTdIH7I6NugsfjRgwx1d+q0GiAh0hqMgoNGSNkgqiexqFjz2cIBssQ4XRo FNoGc3FXHyd7cAsKSa52VUVUd6+MZlBqEGScNtdy+x7pf1MoXCPK3eVcDLSIcejfFJKV MKSQ== X-Gm-Message-State: APjAAAWXe4lsiD1ZsKcXCDzsMxKsPAE37TmL/wR1Z8x4rW65GFt65vOo vfCylN+PKzo+GkdQ3pXXUQ3IuA== X-Google-Smtp-Source: APXvYqxO1KjIWbxN3zM2Dpn7IhLwgJNAwKSJPm5eCaw0SUq7v0f/evIUIGd55cZ/uw4f3iFa166NHA== X-Received: by 2002:a5d:4cca:: with SMTP id c10mr2594160wrt.233.1561540004483; Wed, 26 Jun 2019 02:06:44 -0700 (PDT) Received: from bender.baylibre.local (lmontsouris-657-1-212-31.w90-63.abo.wanadoo.fr. [90.63.244.31]) by smtp.gmail.com with ESMTPSA id o6sm1925797wmc.46.2019.06.26.02.06.43 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Wed, 26 Jun 2019 02:06:43 -0700 (PDT) From: Neil Armstrong To: jbrunet@baylibre.com, khilman@baylibre.com Cc: linux-arm-kernel@lists.infradead.org, linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org, martin.blumenstingl@googlemail.com, linux-gpio@vger.kernel.org, Neil Armstrong Subject: [RFC/RFT v2 07/14] clk: meson: g12a: add notifiers to handle cpu clock change Date: Wed, 26 Jun 2019 11:06:25 +0200 Message-Id: <20190626090632.7540-8-narmstrong@baylibre.com> X-Mailer: git-send-email 2.21.0 In-Reply-To: <20190626090632.7540-1-narmstrong@baylibre.com> References: <20190626090632.7540-1-narmstrong@baylibre.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org In order to implement clock switching for the CLKID_CPU_CLK and CLKID_CPUB_CLK, notifiers are added on specific points of the clock tree : cpu_clk / cpub_clk | \- cpu_clk_dyn | | \- cpu_clk_premux0 | | |- cpu_clk_postmux0 | | | |- cpu_clk_dyn0_div | | | \- xtal/fclk_div2/fclk_div3 | | \- xtal/fclk_div2/fclk_div3 | \- cpu_clk_premux1 | |- cpu_clk_postmux1 | | |- cpu_clk_dyn1_div | | \- xtal/fclk_div2/fclk_div3 | \- xtal/fclk_div2/fclk_div3 \ sys_pll / sys1_pll This for each cluster, a single one for G12A, two for G12B. Each cpu_clk_premux1 tree is marked as read-only and CLK_SET_RATE_NO_REPARENT, to be used as "parking" clock in a safe clock frequency. A notifier is added on each cpu_clk_premux0 to detech when CCF want to change the frequency of the cpu_clk_dyn tree. In this notifier, the cpu_clk_premux1 tree is configured to use the xtal clock and then the cpu_clk_dyn is switch to cpu_clk_premux1 while CCF updates the cpu_clk_premux0 tree. A notifier is added on each sys_pll/sys1_pll to detect when CCF wants to change the PLL clock source of the cpu_clk. In this notifier, the cpu_clk is switched to cpu_clk_dyn while CCF updates the sys_pll/sys1_pll frequency. A third small notifier is added on each cpu_clk / cpub_clk and cpu_clk_dyn, add a small delay at PRE_RATE_CHANGE/POST_RATE_CHANGE to let the other notofiers change propagate before changing the cpu_clk_premux0 and sys_pll clock trees. This notifier set permits switching the cpu_clk / cpub_clk without any glitches and using a safe parking clock while switching between sub-GHz clocks using the cpu_clk_dyn tree. This setup has been tested and validated on the Amlogic G12A and G12B SoCs running the arm64 cpuburn at [1] and cycling between all the possible cpufreq translations of each cluster and checking the final frequency using the clock-measurer, script at [2]. [1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S [2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f Signed-off-by: Neil Armstrong --- drivers/clk/meson/g12a.c | 500 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 468 insertions(+), 32 deletions(-) diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c index 3c75ef5e4d24..7f93888cf458 100644 --- a/drivers/clk/meson/g12a.c +++ b/drivers/clk/meson/g12a.c @@ -14,6 +14,7 @@ #include #include #include +#include #include "clk-input.h" #include "clk-mpll.h" @@ -85,16 +86,9 @@ static struct clk_regmap g12a_fixed_pll = { }, }; -/* - * Internal sys pll emulation configuration parameters - */ -static const struct reg_sequence g12a_sys_init_regs[] = { - { .reg = HHI_SYS_PLL_CNTL1, .def = 0x00000000 }, - { .reg = HHI_SYS_PLL_CNTL2, .def = 0x00000000 }, - { .reg = HHI_SYS_PLL_CNTL3, .def = 0x48681c00 }, - { .reg = HHI_SYS_PLL_CNTL4, .def = 0x88770290 }, - { .reg = HHI_SYS_PLL_CNTL5, .def = 0x39272000 }, - { .reg = HHI_SYS_PLL_CNTL6, .def = 0x56540000 }, +static const struct pll_mult_range g12a_sys_pll_mult_range = { + .min = 128, + .max = 250, }; static struct clk_regmap g12a_sys_pll_dco = { @@ -124,14 +118,15 @@ static struct clk_regmap g12a_sys_pll_dco = { .shift = 29, .width = 1, }, - .init_regs = g12a_sys_init_regs, - .init_count = ARRAY_SIZE(g12a_sys_init_regs), + .range = &g12a_sys_pll_mult_range, }, .hw.init = &(struct clk_init_data){ .name = "sys_pll_dco", - .ops = &meson_clk_pll_ro_ops, + .ops = &meson_clk_pll_ops, .parent_names = (const char *[]){ IN_PREFIX "xtal" }, .num_parents = 1, + /* This clock feeds the CPU, avoid disabling it */ + .flags = CLK_IS_CRITICAL, }, }; @@ -144,9 +139,10 @@ static struct clk_regmap g12a_sys_pll = { }, .hw.init = &(struct clk_init_data){ .name = "sys_pll", - .ops = &clk_regmap_divider_ro_ops, + .ops = &clk_regmap_divider_ops, .parent_names = (const char *[]){ "sys_pll_dco" }, .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, }, }; @@ -177,12 +173,15 @@ static struct clk_regmap g12b_sys1_pll_dco = { .shift = 29, .width = 1, }, + .range = &g12a_sys_pll_mult_range, }, .hw.init = &(struct clk_init_data){ .name = "sys1_pll_dco", - .ops = &meson_clk_pll_ro_ops, + .ops = &meson_clk_pll_ops, .parent_names = (const char *[]){ IN_PREFIX "xtal" }, .num_parents = 1, + /* This clock feeds the CPU, avoid disabling it */ + .flags = CLK_IS_CRITICAL, }, }; @@ -195,9 +194,10 @@ static struct clk_regmap g12b_sys1_pll = { }, .hw.init = &(struct clk_init_data){ .name = "sys1_pll", - .ops = &clk_regmap_divider_ro_ops, + .ops = &clk_regmap_divider_ops, .parent_names = (const char *[]){ "sys1_pll_dco" }, .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, }, }; @@ -266,7 +266,7 @@ static struct clk_regmap g12a_cpu_clk_premux0 = { }, .hw.init = &(struct clk_init_data){ .name = "cpu_clk_dyn0_sel", - .ops = &clk_regmap_mux_ro_ops, + .ops = &clk_regmap_mux_ops, .parent_names = (const char *[]){ IN_PREFIX "xtal", "fclk_div2", "fclk_div3" }, @@ -275,6 +275,38 @@ static struct clk_regmap g12a_cpu_clk_premux0 = { }; /* Datasheet names this field as "mux0_divn_tcnt" */ +#define SYS_CPU_DYN_ENABLE BIT(26) + +/* This divider uses bit 26 to take change in account */ +static int g12a_cpu_clk_mux0_div_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct clk_regmap_div_data *div = clk_get_regmap_div_data(clk); + unsigned int val; + int ret; + + ret = divider_get_val(rate, parent_rate, div->table, div->width, + div->flags); + if (ret < 0) + return ret; + + val = (unsigned int)ret << div->shift; + + regmap_update_bits(clk->map, HHI_SYS_CPU_CLK_CNTL0, + SYS_CPU_DYN_ENABLE, SYS_CPU_DYN_ENABLE); + + return regmap_update_bits(clk->map, div->offset, + clk_div_mask(div->width) << div->shift | + SYS_CPU_DYN_ENABLE, val); +}; + +const struct clk_ops g12a_cpu_clk_mux0_div_ops = { + .recalc_rate = clk_regmap_div_recalc_rate, + .round_rate = clk_regmap_div_round_rate, + .set_rate = g12a_cpu_clk_mux0_div_set_rate, +}; + static struct clk_regmap g12a_cpu_clk_mux0_div = { .data = &(struct clk_regmap_div_data){ .offset = HHI_SYS_CPU_CLK_CNTL0, @@ -283,9 +315,10 @@ static struct clk_regmap g12a_cpu_clk_mux0_div = { }, .hw.init = &(struct clk_init_data){ .name = "cpu_clk_dyn0_div", - .ops = &clk_regmap_divider_ro_ops, + .ops = &g12a_cpu_clk_mux0_div_ops, .parent_names = (const char *[]){ "cpu_clk_dyn0_sel" }, .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, }, }; @@ -298,10 +331,11 @@ static struct clk_regmap g12a_cpu_clk_postmux0 = { }, .hw.init = &(struct clk_init_data){ .name = "cpu_clk_dyn0", - .ops = &clk_regmap_mux_ro_ops, + .ops = &clk_regmap_mux_ops, .parent_names = (const char *[]){ "cpu_clk_dyn0_sel", "cpu_clk_dyn0_div" }, .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, }, }; @@ -314,11 +348,13 @@ static struct clk_regmap g12a_cpu_clk_premux1 = { }, .hw.init = &(struct clk_init_data){ .name = "cpu_clk_dyn1_sel", - .ops = &clk_regmap_mux_ro_ops, + .ops = &clk_regmap_mux_ops, .parent_names = (const char *[]){ IN_PREFIX "xtal", "fclk_div2", "fclk_div3" }, .num_parents = 3, + /* This sub-tree is used a parking clock */ + .flags = CLK_SET_RATE_NO_REPARENT, }, }; @@ -346,10 +382,12 @@ static struct clk_regmap g12a_cpu_clk_postmux1 = { }, .hw.init = &(struct clk_init_data){ .name = "cpu_clk_dyn1", - .ops = &clk_regmap_mux_ro_ops, + .ops = &clk_regmap_mux_ops, .parent_names = (const char *[]){ "cpu_clk_dyn1_sel", "cpu_clk_dyn1_div" }, .num_parents = 2, + /* This sub-tree is used a parking clock */ + .flags = CLK_SET_RATE_NO_REPARENT, }, }; @@ -362,10 +400,11 @@ static struct clk_regmap g12a_cpu_clk_dyn = { }, .hw.init = &(struct clk_init_data){ .name = "cpu_clk_dyn", - .ops = &clk_regmap_mux_ro_ops, + .ops = &clk_regmap_mux_ops, .parent_names = (const char *[]){ "cpu_clk_dyn0", "cpu_clk_dyn1" }, .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, }, }; @@ -378,10 +417,11 @@ static struct clk_regmap g12a_cpu_clk = { }, .hw.init = &(struct clk_init_data){ .name = "cpu_clk", - .ops = &clk_regmap_mux_ro_ops, + .ops = &clk_regmap_mux_ops, .parent_names = (const char *[]){ "cpu_clk_dyn", "sys_pll" }, .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, }, }; @@ -394,10 +434,11 @@ static struct clk_regmap g12b_cpu_clk = { }, .hw.init = &(struct clk_init_data){ .name = "cpu_clk", - .ops = &clk_regmap_mux_ro_ops, + .ops = &clk_regmap_mux_ops, .parent_names = (const char *[]){ "cpu_clk_dyn", "sys1_pll" }, .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, }, }; @@ -410,7 +451,7 @@ static struct clk_regmap g12b_cpub_clk_premux0 = { }, .hw.init = &(struct clk_init_data){ .name = "cpub_clk_dyn0_sel", - .ops = &clk_regmap_mux_ro_ops, + .ops = &clk_regmap_mux_ops, .parent_names = (const char *[]){ IN_PREFIX "xtal", "fclk_div2", "fclk_div3" }, @@ -418,6 +459,37 @@ static struct clk_regmap g12b_cpub_clk_premux0 = { }, }; +/* This divider uses bit 26 to take change in account */ +static int g12b_cpub_clk_mux0_div_set_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct clk_regmap_div_data *div = clk_get_regmap_div_data(clk); + unsigned int val; + int ret; + + ret = divider_get_val(rate, parent_rate, div->table, div->width, + div->flags); + if (ret < 0) + return ret; + + val = (unsigned int)ret << div->shift; + + regmap_update_bits(clk->map, HHI_SYS_CPUB_CLK_CNTL, + SYS_CPU_DYN_ENABLE, SYS_CPU_DYN_ENABLE); + + return regmap_update_bits(clk->map, div->offset, + clk_div_mask(div->width) << div->shift | + SYS_CPU_DYN_ENABLE, val); +}; + +static const struct clk_ops g12b_cpub_clk_mux0_div_ops = { + .recalc_rate = clk_regmap_div_recalc_rate, + .round_rate = clk_regmap_div_round_rate, + .set_rate = g12b_cpub_clk_mux0_div_set_rate, +}; + /* Datasheet names this field as "mux0_divn_tcnt" */ static struct clk_regmap g12b_cpub_clk_mux0_div = { .data = &(struct clk_regmap_div_data){ @@ -427,9 +499,10 @@ static struct clk_regmap g12b_cpub_clk_mux0_div = { }, .hw.init = &(struct clk_init_data){ .name = "cpub_clk_dyn0_div", - .ops = &clk_regmap_divider_ro_ops, + .ops = &g12b_cpub_clk_mux0_div_ops, .parent_names = (const char *[]){ "cpub_clk_dyn0_sel" }, .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, }, }; @@ -442,10 +515,11 @@ static struct clk_regmap g12b_cpub_clk_postmux0 = { }, .hw.init = &(struct clk_init_data){ .name = "cpub_clk_dyn0", - .ops = &clk_regmap_mux_ro_ops, + .ops = &clk_regmap_mux_ops, .parent_names = (const char *[]){ "cpub_clk_dyn0_sel", "cpub_clk_dyn0_div" }, .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, }, }; @@ -458,11 +532,13 @@ static struct clk_regmap g12b_cpub_clk_premux1 = { }, .hw.init = &(struct clk_init_data){ .name = "cpub_clk_dyn1_sel", - .ops = &clk_regmap_mux_ro_ops, + .ops = &clk_regmap_mux_ops, .parent_names = (const char *[]){ IN_PREFIX "xtal", "fclk_div2", "fclk_div3" }, .num_parents = 3, + /* This sub-tree is used a parking clock */ + .flags = CLK_SET_RATE_NO_REPARENT, }, }; @@ -490,10 +566,12 @@ static struct clk_regmap g12b_cpub_clk_postmux1 = { }, .hw.init = &(struct clk_init_data){ .name = "cpub_clk_dyn1", - .ops = &clk_regmap_mux_ro_ops, + .ops = &clk_regmap_mux_ops, .parent_names = (const char *[]){ "cpub_clk_dyn1_sel", "cpub_clk_dyn1_div" }, .num_parents = 2, + /* This sub-tree is used a parking clock */ + .flags = CLK_SET_RATE_NO_REPARENT, }, }; @@ -506,10 +584,11 @@ static struct clk_regmap g12b_cpub_clk_dyn = { }, .hw.init = &(struct clk_init_data){ .name = "cpub_clk_dyn", - .ops = &clk_regmap_mux_ro_ops, + .ops = &clk_regmap_mux_ops, .parent_names = (const char *[]){ "cpub_clk_dyn0", "cpub_clk_dyn1" }, .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, }, }; @@ -522,13 +601,225 @@ static struct clk_regmap g12b_cpub_clk = { }, .hw.init = &(struct clk_init_data){ .name = "cpub_clk", - .ops = &clk_regmap_mux_ro_ops, + .ops = &clk_regmap_mux_ops, .parent_names = (const char *[]){ "cpub_clk_dyn", "sys_pll" }, .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, }, }; +static int g12a_cpu_clk_mux_notifier_cb(struct notifier_block *nb, + unsigned long event, void *data) +{ + if (event == POST_RATE_CHANGE || event == PRE_RATE_CHANGE) { + /* Wait for clock propagation before/after changing the mux */ + udelay(100); + return NOTIFY_OK; + } + + return NOTIFY_DONE; +} + +static struct notifier_block g12a_cpu_clk_mux_nb = { + .notifier_call = g12a_cpu_clk_mux_notifier_cb, +}; + +struct g12a_cpu_clk_postmux_nb_data { + struct notifier_block nb; + struct clk_hw *xtal; + struct clk_hw *cpu_clk_dyn; + struct clk_hw *cpu_clk_postmux0; + struct clk_hw *cpu_clk_postmux1; + struct clk_hw *cpu_clk_premux1; +}; + +static int g12a_cpu_clk_postmux_notifier_cb(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct g12a_cpu_clk_postmux_nb_data *nb_data = + container_of(nb, struct g12a_cpu_clk_postmux_nb_data, nb); + + switch (event) { + case PRE_RATE_CHANGE: + /* + * This notifier means cpu_clk_postmux0 clock will be changed + * to feed cpu_clk, this is the current path : + * cpu_clk + * \- cpu_clk_dyn + * \- cpu_clk_postmux0 + * \- cpu_clk_muxX_div + * \- cpu_clk_premux0 + * \- fclk_div3 or fclk_div2 + * OR + * \- cpu_clk_premux0 + * \- fclk_div3 or fclk_div2 + */ + + /* Setup cpu_clk_premux1 to xtal */ + clk_hw_set_parent(nb_data->cpu_clk_premux1, + nb_data->xtal); + + /* Setup cpu_clk_postmux1 to bypass divider */ + clk_hw_set_parent(nb_data->cpu_clk_postmux1, + nb_data->cpu_clk_premux1); + + /* Switch to parking clk on cpu_clk_postmux1 */ + clk_hw_set_parent(nb_data->cpu_clk_dyn, + nb_data->cpu_clk_postmux1); + + /* + * Now, cpu_clk is 24MHz in the current path : + * cpu_clk + * \- cpu_clk_dyn + * \- cpu_clk_postmux1 + * \- cpu_clk_premux1 + * \- xtal + */ + + udelay(100); + + return NOTIFY_OK; + + case POST_RATE_CHANGE: + /* + * The cpu_clk_postmux0 has ben updated, now switch back + * cpu_clk_dyn to cpu_clk_postmux0 and take the changes + * in account. + */ + + /* Configure cpu_clk_dyn back to cpu_clk_postmux0 */ + clk_hw_set_parent(nb_data->cpu_clk_dyn, + nb_data->cpu_clk_postmux0); + + /* + * new path : + * cpu_clk + * \- cpu_clk_dyn + * \- cpu_clk_postmux0 + * \- cpu_clk_muxX_div + * \- cpu_clk_premux0 + * \- fclk_div3 or fclk_div2 + * OR + * \- cpu_clk_premux0 + * \- fclk_div3 or fclk_div2 + */ + + udelay(100); + + return NOTIFY_OK; + + default: + return NOTIFY_DONE; + } +} + +static struct g12a_cpu_clk_postmux_nb_data g12a_cpu_clk_postmux0_nb_data = { + .cpu_clk_dyn = &g12a_cpu_clk_dyn.hw, + .cpu_clk_postmux0 = &g12a_cpu_clk_postmux0.hw, + .cpu_clk_postmux1 = &g12a_cpu_clk_postmux1.hw, + .cpu_clk_premux1 = &g12a_cpu_clk_premux1.hw, + .nb.notifier_call = g12a_cpu_clk_postmux_notifier_cb, +}; + +static struct g12a_cpu_clk_postmux_nb_data g12b_cpub_clk_postmux0_nb_data = { + .cpu_clk_dyn = &g12b_cpub_clk_dyn.hw, + .cpu_clk_postmux0 = &g12b_cpub_clk_postmux0.hw, + .cpu_clk_postmux1 = &g12b_cpub_clk_postmux1.hw, + .cpu_clk_premux1 = &g12b_cpub_clk_premux1.hw, + .nb.notifier_call = g12a_cpu_clk_postmux_notifier_cb, +}; + +struct g12a_sys_pll_nb_data { + struct notifier_block nb; + struct clk_hw *sys_pll; + struct clk_hw *cpu_clk; + struct clk_hw *cpu_clk_dyn; +}; + +static int g12a_sys_pll_notifier_cb(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct g12a_sys_pll_nb_data *nb_data = + container_of(nb, struct g12a_sys_pll_nb_data, nb); + + switch (event) { + case PRE_RATE_CHANGE: + /* + * This notifier means sys_pll clock will be changed + * to feed cpu_clk, this the current path : + * cpu_clk + * \- sys_pll + * \- sys_pll_dco + */ + + /* Configure cpu_clk to use cpu_clk_dyn */ + clk_hw_set_parent(nb_data->cpu_clk, + nb_data->cpu_clk_dyn); + + /* + * Now, cpu_clk uses the dyn path + * cpu_clk + * \- cpu_clk_dyn + * \- cpu_clk_dynX + * \- cpu_clk_dynX_sel + * \- cpu_clk_dynX_div + * \- xtal/fclk_div2/fclk_div3 + * \- xtal/fclk_div2/fclk_div3 + */ + + udelay(100); + + return NOTIFY_OK; + + case POST_RATE_CHANGE: + /* + * The sys_pll has ben updated, now switch back cpu_clk to + * sys_pll + */ + + /* Configure cpu_clk to use sys_pll */ + clk_hw_set_parent(nb_data->cpu_clk, + nb_data->sys_pll); + + udelay(100); + + /* new path : + * cpu_clk + * \- sys_pll + * \- sys_pll_dco + */ + + return NOTIFY_OK; + + default: + return NOTIFY_DONE; + } +} + +static struct g12a_sys_pll_nb_data g12a_sys_pll_nb_data = { + .sys_pll = &g12a_sys_pll.hw, + .cpu_clk = &g12a_cpu_clk.hw, + .cpu_clk_dyn = &g12a_cpu_clk_dyn.hw, + .nb.notifier_call = g12a_sys_pll_notifier_cb, +}; + +/* G12B first CPU cluster uses sys1_pll */ +static struct g12a_sys_pll_nb_data g12b_cpu_clk_sys1_pll_nb_data = { + .sys_pll = &g12b_sys1_pll.hw, + .cpu_clk = &g12b_cpu_clk.hw, + .cpu_clk_dyn = &g12a_cpu_clk_dyn.hw, + .nb.notifier_call = g12a_sys_pll_notifier_cb, +}; + +/* G12B second CPU cluster uses sys_pll */ +static struct g12a_sys_pll_nb_data g12b_cpub_clk_sys_pll_nb_data = { + .sys_pll = &g12a_sys_pll.hw, + .cpu_clk = &g12b_cpub_clk.hw, + .cpu_clk_dyn = &g12b_cpub_clk_dyn.hw, + .nb.notifier_call = g12a_sys_pll_notifier_cb, +}; + static struct clk_regmap g12a_cpu_clk_div16_en = { .data = &(struct clk_regmap_gate_data){ .offset = HHI_SYS_CPU_CLK_CNTL1, @@ -3792,18 +4083,163 @@ static const struct reg_sequence g12a_init_regs[] = { { .reg = HHI_MPLL_CNTL0, .def = 0x00000543 }, }; +static int meson_g12a_dvfs_setup_common(struct platform_device *pdev, + struct clk_hw **hws) +{ + const char *notifier_clk_name; + struct clk *notifier_clk; + struct clk_hw *xtal; + int ret; + + xtal = clk_hw_get_parent_by_index(hws[CLKID_CPU_CLK_DYN1_SEL], 0); + + /* Setup clock notifier for cpu_clk_postmux0 */ + g12a_cpu_clk_postmux0_nb_data.xtal = xtal; + notifier_clk_name = clk_hw_get_name(&g12a_cpu_clk_postmux0.hw); + notifier_clk = __clk_lookup(notifier_clk_name); + ret = clk_notifier_register(notifier_clk, + &g12a_cpu_clk_postmux0_nb_data.nb); + if (ret) { + dev_err(&pdev->dev, "failed to register the cpu_clk_postmux0 notifier\n"); + return ret; + } + + /* Setup clock notifier for cpu_clk_dyn mux */ + notifier_clk_name = clk_hw_get_name(&g12a_cpu_clk_dyn.hw); + notifier_clk = __clk_lookup(notifier_clk_name); + ret = clk_notifier_register(notifier_clk, &g12a_cpu_clk_mux_nb); + if (ret) { + dev_err(&pdev->dev, "failed to register the cpu_clk_dyn notifier\n"); + return ret; + } + + return 0; +} + +static int meson_g12b_dvfs_setup(struct platform_device *pdev) +{ + struct clk_hw **hws = g12b_hw_onecell_data.hws; + const char *notifier_clk_name; + struct clk *notifier_clk; + struct clk_hw *xtal; + int ret; + + ret = meson_g12a_dvfs_setup_common(pdev, hws); + if (ret) + return ret; + + xtal = clk_hw_get_parent_by_index(hws[CLKID_CPU_CLK_DYN1_SEL], 0); + + /* Setup clock notifier for cpu_clk mux */ + notifier_clk_name = clk_hw_get_name(&g12b_cpu_clk.hw); + notifier_clk = __clk_lookup(notifier_clk_name); + ret = clk_notifier_register(notifier_clk, &g12a_cpu_clk_mux_nb); + if (ret) { + dev_err(&pdev->dev, "failed to register the cpu_clk notifier\n"); + return ret; + } + + /* Setup clock notifier for sys1_pll */ + notifier_clk_name = clk_hw_get_name(&g12b_sys1_pll.hw); + notifier_clk = __clk_lookup(notifier_clk_name); + ret = clk_notifier_register(notifier_clk, + &g12b_cpu_clk_sys1_pll_nb_data.nb); + if (ret) { + dev_err(&pdev->dev, "failed to register the sys1_pll notifier\n"); + return ret; + } + + /* Add notifiers for the second CPU cluster */ + + /* Setup clock notifier for cpub_clk_postmux0 */ + g12b_cpub_clk_postmux0_nb_data.xtal = xtal; + notifier_clk_name = clk_hw_get_name(&g12b_cpub_clk_postmux0.hw); + notifier_clk = __clk_lookup(notifier_clk_name); + ret = clk_notifier_register(notifier_clk, + &g12b_cpub_clk_postmux0_nb_data.nb); + if (ret) { + dev_err(&pdev->dev, "failed to register the cpub_clk_postmux0 notifier\n"); + return ret; + } + + /* Setup clock notifier for cpub_clk_dyn mux */ + notifier_clk_name = clk_hw_get_name(&g12b_cpub_clk_dyn.hw); + notifier_clk = __clk_lookup(notifier_clk_name); + ret = clk_notifier_register(notifier_clk, &g12a_cpu_clk_mux_nb); + if (ret) { + dev_err(&pdev->dev, "failed to register the cpub_clk_dyn notifier\n"); + return ret; + } + + /* Setup clock notifier for cpub_clk mux */ + notifier_clk_name = clk_hw_get_name(&g12b_cpub_clk.hw); + notifier_clk = __clk_lookup(notifier_clk_name); + ret = clk_notifier_register(notifier_clk, &g12a_cpu_clk_mux_nb); + if (ret) { + dev_err(&pdev->dev, "failed to register the cpub_clk notifier\n"); + return ret; + } + + /* Setup clock notifier for sys_pll */ + notifier_clk_name = clk_hw_get_name(&g12a_sys_pll.hw); + notifier_clk = __clk_lookup(notifier_clk_name); + ret = clk_notifier_register(notifier_clk, + &g12b_cpub_clk_sys_pll_nb_data.nb); + if (ret) { + dev_err(&pdev->dev, "failed to register the sys_pll notifier\n"); + return ret; + } + + return 0; +} + + +static int meson_g12a_dvfs_setup(struct platform_device *pdev) +{ + struct clk_hw **hws = g12a_hw_onecell_data.hws; + const char *notifier_clk_name; + struct clk *notifier_clk; + int ret; + + ret = meson_g12a_dvfs_setup_common(pdev, hws); + if (ret) + return ret; + + /* Setup clock notifier for cpu_clk mux */ + notifier_clk_name = clk_hw_get_name(&g12a_cpu_clk.hw); + notifier_clk = __clk_lookup(notifier_clk_name); + ret = clk_notifier_register(notifier_clk, &g12a_cpu_clk_mux_nb); + if (ret) { + dev_err(&pdev->dev, "failed to register the cpu_clk notifier\n"); + return ret; + } + + /* Setup clock notifier for sys_pll */ + notifier_clk_name = clk_hw_get_name(&g12a_sys_pll.hw); + notifier_clk = __clk_lookup(notifier_clk_name); + ret = clk_notifier_register(notifier_clk, &g12a_sys_pll_nb_data.nb); + if (ret) { + dev_err(&pdev->dev, "failed to register the sys_pll notifier\n"); + return ret; + } + + return 0; +} + static const struct meson_eeclkc_data g12a_clkc_data = { .regmap_clks = g12a_clk_regmaps, .regmap_clk_num = ARRAY_SIZE(g12a_clk_regmaps), .hw_onecell_data = &g12a_hw_onecell_data, .init_regs = g12a_init_regs, .init_count = ARRAY_SIZE(g12a_init_regs), + .setup = meson_g12a_dvfs_setup, }; static const struct meson_eeclkc_data g12b_clkc_data = { .regmap_clks = g12a_clk_regmaps, .regmap_clk_num = ARRAY_SIZE(g12a_clk_regmaps), - .hw_onecell_data = &g12b_hw_onecell_data + .hw_onecell_data = &g12b_hw_onecell_data, + .setup = meson_g12b_dvfs_setup, }; static const struct of_device_id clkc_match_table[] = { -- 2.21.0