From: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
To: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Cc: linux-imx@nxp.com, festevam@gmail.com, kernel@pengutronix.de,
s.hauer@pengutronix.de, shawnguo@kernel.org,
mark.rutland@arm.com, robh+dt@kernel.org
Subject: [PATCH] arm: dts: imx6qdl: add gpio expander pca9535
Date: Fri, 12 Jul 2019 14:45:22 +0200 [thread overview]
Message-ID: <20190712124522.571-1-gilles.doffe@savoirfairelinux.com> (raw)
The pca9535 gpio expander is present on the Rex baseboard, but missing
from the dtsi.
Add the new gpio controller and the associated interrupt line
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16.
Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
---
arch/arm/boot/dts/imx6qdl-rex.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
index 97f1659144ea..d5324c6761c1 100644
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -136,6 +136,19 @@
compatible = "atmel,24c02";
reg = <0x57>;
};
+
+ gpio8: pca9535@27 {
+ compatible = "nxp,pca9535";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pca9535>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
&i2c3 {
@@ -237,6 +250,12 @@
>;
};
+ pinctrl_pca9535: pca9535 {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x00017059
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
--
2.19.1
next reply other threads:[~2019-07-12 12:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-12 12:45 Gilles DOFFE [this message]
2019-07-12 13:55 ` [PATCH] arm: dts: imx6qdl: add gpio expander pca9535 Marco Felsch
2019-07-19 10:51 ` Gilles Doffe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190712124522.571-1-gilles.doffe@savoirfairelinux.com \
--to=gilles.doffe@savoirfairelinux.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).