LKML Archive on
 help / color / Atom feed
From: Jernej Skrabec <>
Subject: [PATCH v2 1/2] regulator: axp20x: fix DCDCA and DCDCD for AXP806
Date: Sat, 13 Jul 2019 11:07:16 +0200
Message-ID: <> (raw)
In-Reply-To: <>

Refactoring of the driver introduced bugs in AXP806's DCDCA and DCDCD
regulator definitions.

In DCDCA case, AXP806_DCDCA_1120mV_STEPS was obtained by subtracting
0x47 and 0x33. This should be 0x14 (hex) and not 14 (dec).

In DCDCD case, axp806_dcdcd_ranges[] contains two ranges with same
start and end macros, which is clearly wrong. Second range starts at
1.6V so it should use AXP806_DCDCD_1600mV_[START|END] macros. They are
already defined but unused.

Fixes: db4a555f7c4c ("regulator: axp20x: use defines for masks")
Signed-off-by: Jernej Skrabec <>
 drivers/regulator/axp20x-regulator.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 152053361862..c951568994a1 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -240,7 +240,7 @@
 #define AXP806_DCDCA_600mV_END		\
 #define AXP806_DCDCA_1120mV_START	0x33
-#define AXP806_DCDCA_1120mV_STEPS	14
+#define AXP806_DCDCA_1120mV_STEPS	20
 #define AXP806_DCDCA_1120mV_END		\
 	(AXP806_DCDCA_1120mV_START + AXP806_DCDCA_1120mV_STEPS)
@@ -774,8 +774,8 @@ static const struct regulator_linear_range axp806_dcdcd_ranges[] = {
-			       AXP806_DCDCD_600mV_START,
-			       AXP806_DCDCD_600mV_END,
+			       AXP806_DCDCD_1600mV_START,
+			       AXP806_DCDCD_1600mV_END,

  reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-13  9:07 [PATCH v2 0/2] regulator: axp20x: Fix bugs for AXP803/6 Jernej Skrabec
2019-07-13  9:07 ` Jernej Skrabec [this message]
2019-07-16 18:18   ` Applied "regulator: axp20x: fix DCDCA and DCDCD for AXP806" to the regulator tree Mark Brown
2019-07-13  9:07 ` [PATCH v2 2/2] regulator: axp20x: fix DCDC5 and DCDC6 for AXP803 Jernej Skrabec
2019-07-16 18:18   ` Applied "regulator: axp20x: fix DCDC5 and DCDC6 for AXP803" to the regulator tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git
	git clone --mirror lkml/git/8.git
	git clone --mirror lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone