linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: linux-pm@vger.kernel.org
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Sudeep Holla <sudeep.holla@arm.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Mark Rutland <mark.rutland@arm.com>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>,
	LKML <linux-kernel@vger.kernel.org>,
	LAKML <linux-arm-kernel@lists.infradead.org>
Subject: [PATCH 4/6] ARM: psci: cpuidle: Introduce PSCI CPUidle driver
Date: Mon, 22 Jul 2019 16:37:43 +0100	[thread overview]
Message-ID: <20190722153745.32446-5-lorenzo.pieralisi@arm.com> (raw)
In-Reply-To: <20190722153745.32446-1-lorenzo.pieralisi@arm.com>

PSCI firmware is the standard power management control for
all ARM64 based platforms and it is also deployed on some
ARM 32 bit platforms to date.

Idle state entry in PSCI is currently achieved by calling
arm_cpuidle_init() and arm_cpuidle_suspend() in a generic
idle driver, which in turn relies on ARM/ARM64 CPUidle back-end
to relay the call into PSCI firmware if PSCI is the boot method.

Given that PSCI is the standard idle entry method on ARM64 systems
(which means that no other CPUidle driver are expected on ARM64
platforms - so PSCI is already a generic idle driver), in order to
simplify idle entry and code maintenance, it makes sense to have a PSCI
specific idle driver so that idle code that it is currently living in
drivers/firmware directory can be hoisted out of it and moved
where it belongs, into a full-fledged PSCI driver, leaving PSCI code
in drivers/firmware as a pure firmware interface, as it should be.

Implement a PSCI CPUidle driver. By default it is a silent Kconfig entry
which is left unselected, since it selection would clash with the
generic ARM CPUidle driver that provides a PSCI based idle driver
through the arm/arm64 arches back-ends CPU operations.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
---
 MAINTAINERS                    |   8 ++
 drivers/cpuidle/Kconfig.arm    |   3 +
 drivers/cpuidle/Makefile       |   1 +
 drivers/cpuidle/cpuidle-psci.c | 150 +++++++++++++++++++++++++++++++++
 4 files changed, 162 insertions(+)
 create mode 100644 drivers/cpuidle/cpuidle-psci.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 783569e3c4b4..c2bf8ce65e83 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4286,6 +4286,14 @@ S:	Supported
 F:	drivers/cpuidle/cpuidle-exynos.c
 F:	arch/arm/mach-exynos/pm.c
 
+CPUIDLE DRIVER - ARM PSCI
+M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+M:	Sudeep Holla <sudeep.holla@arm.com>
+L:	linux-pm@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org
+S:	Supported
+F:	drivers/cpuidle/cpuidle-psci.c
+
 CPU IDLE TIME MANAGEMENT FRAMEWORK
 M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
index 48cb3d4bb7d1..929b57424ea4 100644
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -13,6 +13,9 @@ config ARM_CPUIDLE
           initialized by calling the CPU operations init idle hook
           provided by architecture code.
 
+config ARM_PSCI_CPUIDLE
+	bool
+
 config ARM_BIG_LITTLE_CPUIDLE
 	bool "Support for ARM big.LITTLE processors"
 	depends on ARCH_VEXPRESS_TC2_PM || ARCH_EXYNOS
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index 9d7176cee3d3..40d016339b29 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_ARM_U8500_CPUIDLE)         += cpuidle-ux500.o
 obj-$(CONFIG_ARM_AT91_CPUIDLE)          += cpuidle-at91.o
 obj-$(CONFIG_ARM_EXYNOS_CPUIDLE)        += cpuidle-exynos.o
 obj-$(CONFIG_ARM_CPUIDLE)		+= cpuidle-arm.o
+obj-$(CONFIG_ARM_PSCI_CPUIDLE)		+= cpuidle-psci.o
 
 ###############################################################################
 # MIPS drivers
diff --git a/drivers/cpuidle/cpuidle-psci.c b/drivers/cpuidle/cpuidle-psci.c
new file mode 100644
index 000000000000..bdf02600e4e2
--- /dev/null
+++ b/drivers/cpuidle/cpuidle-psci.c
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PSCI CPU idle driver.
+ *
+ * Copyright (C) 2019 ARM Ltd.
+ * Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+ */
+
+#define pr_fmt(fmt) "CPUidle PSCI: " fmt
+
+#include <linux/cpuidle.h>
+#include <linux/cpumask.h>
+#include <linux/cpu_pm.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/psci.h>
+#include <linux/slab.h>
+
+#include <asm/cpuidle.h>
+
+#include "dt_idle_states.h"
+
+static int psci_enter_idle_state(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv, int idx)
+{
+	return CPU_PM_CPU_IDLE_ENTER(psci_cpu_suspend_enter, idx);
+}
+
+static struct cpuidle_driver psci_idle_driver __initdata = {
+	.name = "psci_idle",
+	.owner = THIS_MODULE,
+	/*
+	 * PSCI idle states relies on architectural WFI to
+	 * be represented as state index 0.
+	 */
+	.states[0] = {
+		.enter                  = psci_enter_idle_state,
+		.exit_latency           = 1,
+		.target_residency       = 1,
+		.power_usage		= UINT_MAX,
+		.name                   = "WFI",
+		.desc                   = "ARM WFI",
+	}
+};
+
+static const struct of_device_id psci_idle_state_match[] __initconst = {
+	{ .compatible = "arm,idle-state",
+	  .data = psci_enter_idle_state },
+	{ },
+};
+
+static int __init psci_idle_init_cpu(int cpu)
+{
+	struct cpuidle_driver *drv;
+	struct device_node *cpu_node;
+	const char *enable_method;
+	int ret = 0;
+
+	drv = kmemdup(&psci_idle_driver, sizeof(*drv), GFP_KERNEL);
+	if (!drv)
+		return -ENOMEM;
+
+	drv->cpumask = (struct cpumask *)cpumask_of(cpu);
+
+	cpu_node = of_get_cpu_node(cpu, NULL);
+	if (!cpu_node)
+		return -ENODEV;
+
+	/*
+	 * Check whether the enable-method for the cpu is PSCI, fail
+	 * if it is not.
+	 */
+	enable_method = of_get_property(cpu_node, "enable-method", NULL);
+	if (!enable_method || (strcmp(enable_method, "psci")))
+		ret = -ENODEV;
+
+	of_node_put(cpu_node);
+	if (ret)
+		return ret;
+
+	/*
+	 * Initialize idle states data, starting at index 1, since
+	 * by default idle state 0 is the quiescent state reached
+	 * by the cpu by executing the wfi instruction.
+	 *
+	 * If no DT idle states are detected (ret == 0) let the driver
+	 * initialization fail accordingly since there is no reason to
+	 * initialize the idle driver if only wfi is supported, the
+	 * default archictectural back-end already executes wfi
+	 * on idle entry.
+	 */
+	ret = dt_init_idle_driver(drv, psci_idle_state_match, 1);
+	if (ret <= 0) {
+		ret = ret ? : -ENODEV;
+		goto out_kfree_drv;
+	}
+
+	/*
+	 * Initialize PSCI idle states.
+	 */
+	ret = psci_cpu_init_idle(cpu);
+	if (ret) {
+		pr_err("CPU %d failed to PSCI idle\n", cpu);
+		goto out_kfree_drv;
+	}
+
+	ret = cpuidle_register(drv, NULL);
+	if (ret)
+		goto out_kfree_drv;
+
+	return 0;
+
+out_kfree_drv:
+	kfree(drv);
+	return ret;
+}
+
+/*
+ * psci_idle_init - Initializes PSCI cpuidle driver
+ *
+ * Initializes PSCI cpuidle driver for all CPUs, if any CPU fails
+ * to register cpuidle driver then rollback to cancel all CPUs
+ * registration.
+ */
+static int __init psci_idle_init(void)
+{
+	int cpu, ret;
+	struct cpuidle_driver *drv;
+	struct cpuidle_device *dev;
+
+	for_each_possible_cpu(cpu) {
+		ret = psci_idle_init_cpu(cpu);
+		if (ret)
+			goto out_fail;
+	}
+
+	return 0;
+
+out_fail:
+	while (--cpu >= 0) {
+		dev = per_cpu(cpuidle_devices, cpu);
+		drv = cpuidle_get_cpu_driver(dev);
+		cpuidle_unregister(drv);
+		kfree(drv);
+	}
+
+	return ret;
+}
+device_initcall(psci_idle_init);
-- 
2.21.0


  parent reply	other threads:[~2019-07-22 15:38 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-22 15:37 [PATCH 0/6] ARM: psci: cpuidle: PSCI CPUidle rework Lorenzo Pieralisi
2019-07-22 15:37 ` [PATCH 1/6] ARM: cpuidle: Remove useless header include Lorenzo Pieralisi
2019-08-06 15:51   ` Sudeep Holla
2019-08-07  8:19   ` Daniel Lezcano
2019-07-22 15:37 ` [PATCH 2/6] ARM: cpuidle: Remove overzealous error logging Lorenzo Pieralisi
2019-08-06 15:51   ` Sudeep Holla
2019-08-07  8:20   ` Daniel Lezcano
2019-07-22 15:37 ` [PATCH 3/6] drivers: firmware: psci: Decouple checker from generic ARM CPUidle Lorenzo Pieralisi
2019-08-06 15:54   ` Sudeep Holla
2019-08-07 14:09   ` Daniel Lezcano
2019-07-22 15:37 ` Lorenzo Pieralisi [this message]
2019-07-23 11:46   ` [PATCH 4/6] ARM: psci: cpuidle: Introduce PSCI CPUidle driver Ulf Hansson
2019-07-23 14:15     ` Lorenzo Pieralisi
2019-08-06 16:10   ` Sudeep Holla
2019-08-06 16:34     ` Lorenzo Pieralisi
2019-08-07 16:30   ` Daniel Lezcano
2019-07-22 15:37 ` [PATCH 5/6] ARM: psci: cpuidle: Enable " Lorenzo Pieralisi
2019-08-06 16:16   ` Sudeep Holla
2019-08-06 16:40     ` Lorenzo Pieralisi
2019-07-22 15:37 ` [PATCH 6/6] PSCI: cpuidle: Refactor CPU suspend power_state parameter handling Lorenzo Pieralisi
2019-07-23 11:47   ` Ulf Hansson
2019-08-07 18:09   ` Daniel Lezcano
2019-08-08 12:55   ` Sudeep Holla
2019-08-08 15:29     ` Ulf Hansson
2019-08-08 16:04       ` Sudeep Holla
2019-07-23 11:49 ` [PATCH 0/6] ARM: psci: cpuidle: PSCI CPUidle rework Ulf Hansson
2019-07-23 14:19   ` Lorenzo Pieralisi
2019-08-09 11:03 ` [PATCH v2 0/8] " Lorenzo Pieralisi
2019-08-09 11:03   ` [PATCH v2 1/8] ARM: cpuidle: Remove useless header include Lorenzo Pieralisi
2019-08-09 11:03   ` [PATCH v2 2/8] ARM: cpuidle: Remove overzealous error logging Lorenzo Pieralisi
2019-08-09 11:03   ` [PATCH v2 3/8] drivers: firmware: psci: Decouple checker from generic ARM CPUidle Lorenzo Pieralisi
2019-08-09 11:03   ` [PATCH v2 4/8] ARM: psci: cpuidle: Introduce PSCI CPUidle driver Lorenzo Pieralisi
2019-08-09 11:03   ` [PATCH v2 5/8] ARM: psci: cpuidle: Enable " Lorenzo Pieralisi
2019-08-09 11:03   ` [PATCH v2 6/8] PSCI: cpuidle: Refactor CPU suspend power_state parameter handling Lorenzo Pieralisi
2019-08-09 11:03   ` [PATCH v2 7/8] arm64: defconfig: Enable the PSCI CPUidle driver Lorenzo Pieralisi
2019-08-09 16:53     ` Will Deacon
2019-08-09 11:03   ` [PATCH v2 8/8] ARM: imx_v6_v7_defconfig: " Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190722153745.32446-5-lorenzo.pieralisi@arm.com \
    --to=lorenzo.pieralisi@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=rjw@rjwysocki.net \
    --cc=sudeep.holla@arm.com \
    --cc=ulf.hansson@linaro.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).