linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Christoph Hellwig <hch@lst.de>
To: "Jérôme Glisse" <jglisse@redhat.com>,
	"Jason Gunthorpe" <jgg@mellanox.com>,
	"Ben Skeggs" <bskeggs@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>,
	linux-mm@kvack.org, nouveau@lists.freedesktop.org,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/7] mm: move hmm_vma_range_done and hmm_vma_fault to nouveau
Date: Wed, 24 Jul 2019 08:52:53 +0200	[thread overview]
Message-ID: <20190724065258.16603-3-hch@lst.de> (raw)
In-Reply-To: <20190724065258.16603-1-hch@lst.de>

These two functions are marked as a legacy APIs to get rid of, but seem
to suit the current nouveau flow.  Move it to the only user in
preparation for fixing a locking bug involving caller and callee.
All comments referring to the old API have been removed as this now
is a driver private helper.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
---
 drivers/gpu/drm/nouveau/nouveau_svm.c | 46 ++++++++++++++++++++++-
 include/linux/hmm.h                   | 54 ---------------------------
 2 files changed, 44 insertions(+), 56 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_svm.c b/drivers/gpu/drm/nouveau/nouveau_svm.c
index 8c92374afcf2..6c1b04de0db8 100644
--- a/drivers/gpu/drm/nouveau/nouveau_svm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_svm.c
@@ -475,6 +475,48 @@ nouveau_svm_fault_cache(struct nouveau_svm *svm,
 		fault->inst, fault->addr, fault->access);
 }
 
+static inline bool
+nouveau_range_done(struct hmm_range *range)
+{
+	bool ret = hmm_range_valid(range);
+
+	hmm_range_unregister(range);
+	return ret;
+}
+
+static int
+nouveau_range_fault(struct hmm_mirror *mirror, struct hmm_range *range,
+		    bool block)
+{
+	long ret;
+
+	range->default_flags = 0;
+	range->pfn_flags_mask = -1UL;
+
+	ret = hmm_range_register(range, mirror,
+				 range->start, range->end,
+				 PAGE_SHIFT);
+	if (ret)
+		return (int)ret;
+
+	if (!hmm_range_wait_until_valid(range, HMM_RANGE_DEFAULT_TIMEOUT)) {
+		up_read(&range->vma->vm_mm->mmap_sem);
+		return -EAGAIN;
+	}
+
+	ret = hmm_range_fault(range, block);
+	if (ret <= 0) {
+		if (ret == -EBUSY || !ret) {
+			up_read(&range->vma->vm_mm->mmap_sem);
+			ret = -EBUSY;
+		} else if (ret == -EAGAIN)
+			ret = -EBUSY;
+		hmm_range_unregister(range);
+		return ret;
+	}
+	return 0;
+}
+
 static int
 nouveau_svm_fault(struct nvif_notify *notify)
 {
@@ -649,10 +691,10 @@ nouveau_svm_fault(struct nvif_notify *notify)
 		range.values = nouveau_svm_pfn_values;
 		range.pfn_shift = NVIF_VMM_PFNMAP_V0_ADDR_SHIFT;
 again:
-		ret = hmm_vma_fault(&svmm->mirror, &range, true);
+		ret = nouveau_range_fault(&svmm->mirror, &range, true);
 		if (ret == 0) {
 			mutex_lock(&svmm->mutex);
-			if (!hmm_vma_range_done(&range)) {
+			if (!nouveau_range_done(&range)) {
 				mutex_unlock(&svmm->mutex);
 				goto again;
 			}
diff --git a/include/linux/hmm.h b/include/linux/hmm.h
index b8a08b2a10ca..7ef56dc18050 100644
--- a/include/linux/hmm.h
+++ b/include/linux/hmm.h
@@ -484,60 +484,6 @@ long hmm_range_dma_unmap(struct hmm_range *range,
  */
 #define HMM_RANGE_DEFAULT_TIMEOUT 1000
 
-/* This is a temporary helper to avoid merge conflict between trees. */
-static inline bool hmm_vma_range_done(struct hmm_range *range)
-{
-	bool ret = hmm_range_valid(range);
-
-	hmm_range_unregister(range);
-	return ret;
-}
-
-/* This is a temporary helper to avoid merge conflict between trees. */
-static inline int hmm_vma_fault(struct hmm_mirror *mirror,
-				struct hmm_range *range, bool block)
-{
-	long ret;
-
-	/*
-	 * With the old API the driver must set each individual entries with
-	 * the requested flags (valid, write, ...). So here we set the mask to
-	 * keep intact the entries provided by the driver and zero out the
-	 * default_flags.
-	 */
-	range->default_flags = 0;
-	range->pfn_flags_mask = -1UL;
-
-	ret = hmm_range_register(range, mirror,
-				 range->start, range->end,
-				 PAGE_SHIFT);
-	if (ret)
-		return (int)ret;
-
-	if (!hmm_range_wait_until_valid(range, HMM_RANGE_DEFAULT_TIMEOUT)) {
-		/*
-		 * The mmap_sem was taken by driver we release it here and
-		 * returns -EAGAIN which correspond to mmap_sem have been
-		 * drop in the old API.
-		 */
-		up_read(&range->vma->vm_mm->mmap_sem);
-		return -EAGAIN;
-	}
-
-	ret = hmm_range_fault(range, block);
-	if (ret <= 0) {
-		if (ret == -EBUSY || !ret) {
-			/* Same as above, drop mmap_sem to match old API. */
-			up_read(&range->vma->vm_mm->mmap_sem);
-			ret = -EBUSY;
-		} else if (ret == -EAGAIN)
-			ret = -EBUSY;
-		hmm_range_unregister(range);
-		return ret;
-	}
-	return 0;
-}
-
 /* Below are for HMM internal use only! Not to be used by device driver! */
 static inline void hmm_mm_init(struct mm_struct *mm)
 {
-- 
2.20.1


  parent reply	other threads:[~2019-07-24  6:53 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-24  6:52 hmm_range_fault related fixes and legacy API removal v3 Christoph Hellwig
2019-07-24  6:52 ` [PATCH 1/7] mm: always return EBUSY for invalid ranges in hmm_range_{fault,snapshot} Christoph Hellwig
2019-07-24  6:52 ` Christoph Hellwig [this message]
2019-07-24  6:52 ` [PATCH 3/7] nouveau: remove the block parameter to nouveau_range_fault Christoph Hellwig
2019-07-24  6:52 ` [PATCH 4/7] nouveau: unlock mmap_sem on all errors from nouveau_range_fault Christoph Hellwig
2019-07-24  6:52 ` [PATCH 5/7] nouveau: return -EBUSY when hmm_range_wait_until_valid fails Christoph Hellwig
2019-07-24  6:52 ` [PATCH 6/7] mm: remove the legacy hmm_pfn_* APIs Christoph Hellwig
2019-07-24  6:52 ` [PATCH 7/7] mm: comment on VM_FAULT_RETRY semantics in handle_mm_fault Christoph Hellwig
2019-07-26  0:16 ` hmm_range_fault related fixes and legacy API removal v3 Jason Gunthorpe
2019-07-26  0:55   ` Ralph Campbell
2019-07-26  4:57   ` Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190724065258.16603-3-hch@lst.de \
    --to=hch@lst.de \
    --cc=bskeggs@redhat.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jgg@mellanox.com \
    --cc=jglisse@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=nouveau@lists.freedesktop.org \
    --cc=rcampbell@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).