From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: linux-serial@vger.kernel.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
Stefan Agner <stefan@agner.ch>,
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>,
Chris Healy <cphealy@gmail.com>, Cory Tusar <cory.tusar@zii.aero>,
Lucas Stach <l.stach@pengutronix.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jslaby@suse.com>,
linux-imx@nxp.com, linux-kernel@vger.kernel.org
Subject: [PATCH 11/24] tty: serial: fsl_lpuart: Drop unnecessary extra parenthesis
Date: Mon, 29 Jul 2019 12:52:13 -0700 [thread overview]
Message-ID: <20190729195226.8862-12-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190729195226.8862-1-andrew.smirnov@gmail.com>
Drop unnecessary extra parenthesis in the driver.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-imx@nxp.com
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
drivers/tty/serial/fsl_lpuart.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 5181ba5d8f71..5a1e19733353 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1443,7 +1443,7 @@ static int lpuart_startup(struct uart_port *port)
lpuart_setup_watermark(sport);
temp = readb(sport->port.membase + UARTCR2);
- temp |= (UARTCR2_RIE | UARTCR2_TIE | UARTCR2_RE | UARTCR2_TE);
+ temp |= UARTCR2_RIE | UARTCR2_TIE | UARTCR2_RE | UARTCR2_TE;
writeb(temp, sport->port.membase + UARTCR2);
if (sport->dma_rx_chan && !lpuart_start_rx_dma(sport)) {
@@ -1652,7 +1652,7 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
termios->c_cflag &= ~CRTSCTS;
if (termios->c_cflag & CRTSCTS)
- modem |= (UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
+ modem |= UARTMODEM_RXRTSE | UARTMODEM_TXCTSE;
else
modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
@@ -1663,7 +1663,7 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
if ((termios->c_cflag & CSIZE) == CS7)
termios->c_cflag |= PARENB;
- if ((termios->c_cflag & PARENB)) {
+ if (termios->c_cflag & PARENB) {
if (termios->c_cflag & CMSPAR) {
cr1 &= ~UARTCR1_PE;
if (termios->c_cflag & PARODD)
@@ -1702,7 +1702,7 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
sport->port.read_status_mask = 0;
if (termios->c_iflag & INPCK)
- sport->port.read_status_mask |= (UARTSR1_FE | UARTSR1_PE);
+ sport->port.read_status_mask |= UARTSR1_FE | UARTSR1_PE;
if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
sport->port.read_status_mask |= UARTSR1_FE;
@@ -1816,7 +1816,7 @@ lpuart32_serial_setbrg(struct lpuart_port *sport, unsigned int baudrate)
tmp |= UARTBAUD_BOTHEDGE;
tmp &= ~(UARTBAUD_OSR_MASK << UARTBAUD_OSR_SHIFT);
- tmp |= (((osr-1) & UARTBAUD_OSR_MASK) << UARTBAUD_OSR_SHIFT);
+ tmp |= ((osr-1) & UARTBAUD_OSR_MASK) << UARTBAUD_OSR_SHIFT;
tmp &= ~UARTBAUD_SBR_MASK;
tmp |= sbr & UARTBAUD_SBR_MASK;
@@ -1869,7 +1869,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
}
if (termios->c_cflag & CRTSCTS) {
- modem |= (UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
+ modem |= UARTMODEM_RXRTSE | UARTMODEM_TXCTSE;
} else {
termios->c_cflag &= ~CRTSCTS;
modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
@@ -1918,7 +1918,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
sport->port.read_status_mask = 0;
if (termios->c_iflag & INPCK)
- sport->port.read_status_mask |= (UARTSTAT_FE | UARTSTAT_PE);
+ sport->port.read_status_mask |= UARTSTAT_FE | UARTSTAT_PE;
if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
sport->port.read_status_mask |= UARTSTAT_FE;
@@ -2085,7 +2085,7 @@ lpuart_console_write(struct console *co, const char *s, unsigned int count)
/* first save CR2 and then disable interrupts */
cr2 = old_cr2 = readb(sport->port.membase + UARTCR2);
- cr2 |= (UARTCR2_TE | UARTCR2_RE);
+ cr2 |= UARTCR2_TE | UARTCR2_RE;
cr2 &= ~(UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_RIE);
writeb(cr2, sport->port.membase + UARTCR2);
@@ -2116,7 +2116,7 @@ lpuart32_console_write(struct console *co, const char *s, unsigned int count)
/* first save CR2 and then disable interrupts */
cr = old_cr = lpuart32_read(&sport->port, UARTCTRL);
- cr |= (UARTCTRL_TE | UARTCTRL_RE);
+ cr |= UARTCTRL_TE | UARTCTRL_RE;
cr &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE);
lpuart32_write(&sport->port, cr, UARTCTRL);
@@ -2574,7 +2574,7 @@ static int lpuart_resume(struct device *dev)
} else {
lpuart_setup_watermark(sport);
temp = readb(sport->port.membase + UARTCR2);
- temp |= (UARTCR2_RIE | UARTCR2_TIE | UARTCR2_RE | UARTCR2_TE);
+ temp |= UARTCR2_RIE | UARTCR2_TIE | UARTCR2_RE | UARTCR2_TE;
writeb(temp, sport->port.membase + UARTCR2);
}
--
2.21.0
next prev parent reply other threads:[~2019-07-29 19:59 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-29 19:52 [PATCH 00/24] LPUART fixes and improvements Andrey Smirnov
2019-07-29 19:52 ` [PATCH 01/24] tty: serial: fsl_lpuart: fix framing error handling when using DMA Andrey Smirnov
2019-07-29 19:52 ` [PATCH 02/24] tty: serial: fsl_lpuart: flush receive FIFO after overruns Andrey Smirnov
2019-07-29 19:52 ` [PATCH 03/24] tty: serial: fsl_lpuart: Flush HW FIFOs in .flush_buffer Andrey Smirnov
2019-07-29 19:52 ` [PATCH 04/24] tty: serial: fsl_lpuart: Simplify RX/TX IRQ handlers Andrey Smirnov
2019-07-29 19:52 ` [PATCH 05/24] tty: serial: fsl_lpuart: Fix bogus indentation Andrey Smirnov
2019-07-29 19:52 ` [PATCH 06/24] tty: serial: fsl_lpuart: Drop unnecessary sg_set_buf() call Andrey Smirnov
2019-07-30 15:51 ` Greg Kroah-Hartman
2019-07-31 2:08 ` Andrey Smirnov
2019-07-29 19:52 ` [PATCH 07/24] tty: serial: fsl_lpuart: Drop unnecessary uart_write_wakeup() Andrey Smirnov
2019-07-29 19:52 ` [PATCH 08/24] tty: serial: fsl_lpuart: Fix issue in software flow control Andrey Smirnov
2019-07-29 19:52 ` [PATCH 09/24] tty: serial: fls_lpuart: Split shared TX IRQ handler into two Andrey Smirnov
2019-07-29 19:52 ` [PATCH 10/24] tty: serial: fsl_lpuart: Drop no-op bit opearation Andrey Smirnov
2019-07-29 19:52 ` Andrey Smirnov [this message]
2019-07-29 19:52 ` [PATCH 12/24] tty: serial: fsl_lpuart: Clear CSTOPB unconditionally Andrey Smirnov
2019-07-29 19:52 ` [PATCH 13/24] tty: serial: fsl_lpuart: Use appropriate lpuart32_* I/O funcs Andrey Smirnov
2019-07-29 19:52 ` [PATCH 14/24] tty: serial: fsl_lpuart: Introduce lpuart_wait_bit_set() Andrey Smirnov
2019-07-29 19:52 ` [PATCH 15/24] tty: serial: fsl_lpuart: Use cpu_relax() instead of barrier() Andrey Smirnov
2019-07-29 19:52 ` [PATCH 16/24] tty: serial: fsl_lpuart: Introduce lpuart_stopped_or_empty() Andrey Smirnov
2019-07-29 19:52 ` [PATCH 17/24] tty: serial: fsl_lpuart: Drop unnecessary lpuart*_stop_tx() Andrey Smirnov
2019-07-29 19:52 ` [PATCH 18/24] tty: serial: fsl_lpuart: Introduce lpuart_dma_shutdown() Andrey Smirnov
2019-07-29 19:52 ` [PATCH 19/24] tty: serial: fsl_lpuart: Introduce lpuart_tx_dma_startup() Andrey Smirnov
2019-07-30 15:56 ` Greg Kroah-Hartman
2019-07-31 2:09 ` Andrey Smirnov
2019-07-29 19:52 ` [PATCH 20/24] tty: serial: fsl_lpuart: Introduce lpuart_rx_dma_startup() Andrey Smirnov
2019-07-29 19:52 ` [PATCH 21/24] tty: serial: fsl_lpuart: Introduce lpuart32_configure() Andrey Smirnov
2019-07-29 19:52 ` [PATCH 22/24] tty: serial: fsl_lpuart: Introduce lpuart*_setup_watermark_enable() Andrey Smirnov
2019-07-29 19:52 ` [PATCH 23/24] tty: serial: fsl_lpuart: Don't enable TIE in .startup() or .resume() Andrey Smirnov
2019-07-29 19:52 ` [PATCH 24/24] tty: serial: fsl_lpuart: Ignore TX/RX interrupts if DMA is enabled Andrey Smirnov
2019-07-30 15:53 ` [PATCH 00/24] LPUART fixes and improvements Greg Kroah-Hartman
2019-07-30 15:54 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190729195226.8862-12-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=bhuvanchandra.dv@toradex.com \
--cc=cory.tusar@zii.aero \
--cc=cphealy@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.com \
--cc=l.stach@pengutronix.de \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).