* [PATCH v3] checkpatch: add several Kconfig default value tests
@ 2019-07-31 15:13 Miles Chen
0 siblings, 0 replies; 3+ messages in thread
From: Miles Chen @ 2019-07-31 15:13 UTC (permalink / raw)
To: Andy Whitcroft, Joe Perches
Cc: linux-kernel, linux-mediatek, wsd_upstream, Miles Chen, Yingjoe Chen
This change adds 3 Kconfig default value tests.
Repost patch v3 (Follow Joe's suggestion in v2)
1. discourage default n cases:
e.g.,
default n
2. discourage default "[ynm]" cases:
e.g.,
arch/powerpc/Kconfig: default "y" if PPC_POWERNV
arch/powerpc/Kconfig: default "y" if PPC_POWERNV
arch/powerpc/Kconfig: default "n"
drivers/auxdisplay/Kconfig: default "n"
drivers/crypto/Kconfig: default "m"
drivers/rapidio/devices/Kconfig: default "n"
3. discourage default EXPERT or default !EXPERT cases:
e.g.,
drivers/hid/Kconfig: default !EXPERT
tested cases:
default m
default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
default y if ALPHA_QEMU
default n if PPC_POWERNV
default n
default EXPERT
default !EXPERT
default "m"
default "n"
default "y" if EXPERT
default "y" if PPC_POWERNV
test result:
WARNING: 'default n' is the default value, no need to write it explicitly
+ default n
WARNING: Avoid using default EXPERT
+ default EXPERT
WARNING: Avoid using default EXPERT
+ default !EXPERT
WARNING: Use 'default m' not 'default "m"'
+ default "m"
WARNING: Use 'default n' not 'default "n"'
+ default "n"
WARNING: Use 'default y' not 'default "y"'
+ default "y" if EXPERT
WARNING: Use 'default y' not 'default "y"'
+ default "y" if PPC_POWERNV
test --fix capability:
default n => delete line
default "m" => default m
default "n" => default n
default "y" if EXPERT => default y if EXPERT
default "y" if PPC_POWERNV => default y if PPC_POWERNV
default !EXPERT => no change
default EXPERT => no change
Change since v1:
discourage default n$
discourage default "[ynm]"
discourage default \!?EXPERT
Change since v2:
test Kconfig in a single block
print precise message such as 'default "m"', not 'default "[ynm]"'
provide --fix capability
Cc: Joe Perches <joe@perches.com>
Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
---
scripts/checkpatch.pl | 139 ++++++++++++++++++++++++++----------------
1 file changed, 85 insertions(+), 54 deletions(-)
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 93a7edfe0f05..b080eea68cf6 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -2932,60 +2932,98 @@ sub process {
"Do not include the paragraph about writing to the Free Software Foundation's mailing address from the sample GPL notice. The FSF has changed addresses in the past, and may do so again. Linux already includes a copy of the GPL.\n" . $herevet)
}
-# check for Kconfig help text having a real description
-# Only applies when adding the entry originally, after that we do not have
-# sufficient context to determine whether it is indeed long enough.
- if ($realfile =~ /Kconfig/ &&
- # 'choice' is usually the last thing on the line (though
- # Kconfig supports named choices), so use a word boundary
- # (\b) rather than a whitespace character (\s)
- $line =~ /^\+\s*(?:config|menuconfig|choice)\b/) {
- my $length = 0;
- my $cnt = $realcnt;
- my $ln = $linenr + 1;
- my $f;
- my $is_start = 0;
- my $is_end = 0;
- for (; $cnt > 0 && defined $lines[$ln - 1]; $ln++) {
- $f = $lines[$ln - 1];
- $cnt-- if ($lines[$ln - 1] !~ /^-/);
- $is_end = $lines[$ln - 1] =~ /^\+/;
-
- next if ($f =~ /^-/);
- last if (!$file && $f =~ /^\@\@/);
-
- if ($lines[$ln - 1] =~ /^\+\s*(?:bool|tristate|prompt)\s*["']/) {
- $is_start = 1;
- } elsif ($lines[$ln - 1] =~ /^\+\s*(?:help|---help---)\s*$/) {
- if ($lines[$ln - 1] =~ "---help---") {
- WARN("CONFIG_DESCRIPTION",
- "prefer 'help' over '---help---' for new help texts\n" . $herecurr);
+# Kconfig tests
+ if ($realfile =~ /Kconfig/) {
+ # check for Kconfig help text having a real description
+ # Only applies when adding the entry originally, after
+ # that we do not have sufficient context to determine
+ # whether it is indeed long enough.
+ # 'choice' is usually the last thing on the line (though
+ # Kconfig supports named choices), so use a word
+ # boundary (\b) rather than a whitespace character (\s)
+ if ($line =~ /^\+\s*(?:config|menuconfig|choice)\b/) {
+ my $length = 0;
+ my $cnt = $realcnt;
+ my $ln = $linenr + 1;
+ my $f;
+ my $is_start = 0;
+ my $is_end = 0;
+ for (; $cnt > 0 && defined $lines[$ln - 1]; $ln++) {
+ $f = $lines[$ln - 1];
+ $cnt-- if ($lines[$ln - 1] !~ /^-/);
+ $is_end = $lines[$ln - 1] =~ /^\+/;
+
+ next if ($f =~ /^-/);
+ last if (!$file && $f =~ /^\@\@/);
+
+ if ($lines[$ln - 1] =~ /^\+\s*(?:bool|tristate|prompt)\s*["']/) {
+ $is_start = 1;
+ } elsif ($lines[$ln - 1] =~ /^\+\s*(?:help|---help---)\s*$/) {
+ if ($lines[$ln - 1] =~ "---help---") {
+ WARN("CONFIG_DESCRIPTION",
+ "prefer 'help' over '---help---' for new help texts\n" . $herecurr);
+ }
+ $length = -1;
+ }
+
+ $f =~ s/^.//;
+ $f =~ s/#.*//;
+ $f =~ s/^\s+//;
+ next if ($f =~ /^$/);
+
+ # This only checks context lines in the patch
+ # and so hopefully shouldn't trigger false
+ # positives, even though some of these are
+ # common words in help texts
+ if ($f =~ /^\s*(?:config|menuconfig|choice|endchoice|
+ if|endif|menu|endmenu|source)\b/x) {
+ $is_end = 1;
+ last;
}
- $length = -1;
+ $length++;
+ }
+ if ($is_start && $is_end && $length < $min_conf_desc_length) {
+ WARN("CONFIG_DESCRIPTION",
+ "please write a paragraph that describes the config symbol fully\n" . $herecurr);
}
+ #print "is_start<$is_start> is_end<$is_end> length<$length>\n";
+ }
- $f =~ s/^.//;
- $f =~ s/#.*//;
- $f =~ s/^\s+//;
- next if ($f =~ /^$/);
-
- # This only checks context lines in the patch
- # and so hopefully shouldn't trigger false
- # positives, even though some of these are
- # common words in help texts
- if ($f =~ /^\s*(?:config|menuconfig|choice|endchoice|
- if|endif|menu|endmenu|source)\b/x) {
- $is_end = 1;
- last;
+# discourage the use of boolean for type definition attributes
+ if ($line =~ /^\+\s*\bboolean\b/) {
+ if (WARN("CONFIG_TYPE_BOOLEAN",
+ "Use of boolean is deprecated, please use bool instead\n" . $herecurr) &&
+ $fix) {
+ $fixed[$fixlinenr] =~ s/\bboolean\b/bool/;
+ }
+ }
+
+# Kconfig: discourage redundant 'default n'
+ if ($line =~ /^\+\s*default\s+n$/) {
+ if (WARN("CONFIG_DEFAULT_VALUE_STYLE",
+ "'default n' is the default value, no need to write it explicitly\n" . $herecurr) &&
+ $fix) {
+ fix_delete_line($fixlinenr, $rawline);
}
- $length++;
}
- if ($is_start && $is_end && $length < $min_conf_desc_length) {
- WARN("CONFIG_DESCRIPTION",
- "please write a paragraph that describes the config symbol fully\n" . $herecurr);
+
+# Kconfig: discourage quoted defaults: use default [ynm], not default "[ynm]"
+ if ($rawline =~ /^\+\s*default\s+"([ynm])"/) {
+ if (WARN("CONFIG_DEFAULT_VALUE_STYLE",
+ "Use 'default $1' not 'default \"$1\"'\n" . $herecurr) &&
+ $fix) {
+ $fixed[$fixlinenr] =~ s/\b(default\s+)"(.)"/$1$2/;
+ }
+ }
+
+# Kconfig: discourage using default EXPERT or !EXPERT
+ if ($line =~ /^\+\s*default\s+\!?\s*EXPERT\b/) {
+ WARN("CONFIG_DEFAULT_VALUE_STYLE",
+ "Avoid using default EXPERT\n" . $herecurr);
}
- #print "is_start<$is_start> is_end<$is_end> length<$length>\n";
}
+# End of Kconfig tests
+
# check for MAINTAINERS entries that don't have the right form
if ($realfile =~ /^MAINTAINERS$/ &&
@@ -2998,13 +3036,6 @@ sub process {
}
}
-# discourage the use of boolean for type definition attributes of Kconfig options
- if ($realfile =~ /Kconfig/ &&
- $line =~ /^\+\s*\bboolean\b/) {
- WARN("CONFIG_TYPE_BOOLEAN",
- "Use of boolean is deprecated, please use bool instead.\n" . $herecurr);
- }
-
if (($realfile =~ /Makefile.*/ || $realfile =~ /Kbuild.*/) &&
($line =~ /\+(EXTRA_[A-Z]+FLAGS).*/)) {
my $flag = $1;
--
2.18.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v3] checkpatch: add several Kconfig default value tests
2019-07-05 3:16 Miles Chen
@ 2019-07-19 7:36 ` Miles Chen
0 siblings, 0 replies; 3+ messages in thread
From: Miles Chen @ 2019-07-19 7:36 UTC (permalink / raw)
To: Andy Whitcroft
Cc: Joe Perches, linux-kernel, linux-mediatek, wsd_upstream, Yingjoe Chen
On Fri, 2019-07-05 at 11:16 +0800, Miles Chen wrote:
> This change adds 3 Kconfig default value tests.
Hi Joe,
I was wondering if this patch looks good to you?
Miles
>
> 1. discourage default n cases:
> e.g.,
> default n
>
> 2. discourage default "[ynm]" cases:
> e.g.,
> arch/powerpc/Kconfig: default "y" if PPC_POWERNV
> arch/powerpc/Kconfig: default "y" if PPC_POWERNV
> arch/powerpc/Kconfig: default "n"
> drivers/auxdisplay/Kconfig: default "n"
> drivers/crypto/Kconfig: default "m"
> drivers/rapidio/devices/Kconfig: default "n"
>
> 3. discourage default EXPERT or default !EXPERT cases:
> e.g.,
> drivers/hid/Kconfig: default !EXPERT
>
> tested cases:
> default m
> default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
> default y if ALPHA_QEMU
> default n if PPC_POWERNV
> default n
> default EXPERT
> default !EXPERT
> default "m"
> default "n"
> default "y" if EXPERT
> default "y" if PPC_POWERNV
>
> test result:
> WARNING: 'default n' is the default value, no need to write it explicitly
> + default n
>
> WARNING: Avoid using default EXPERT
> + default EXPERT
>
> WARNING: Avoid using default EXPERT
> + default !EXPERT
>
> WARNING: Use 'default m' not 'default "m"'
> + default "m"
>
> WARNING: Use 'default n' not 'default "n"'
> + default "n"
>
> WARNING: Use 'default y' not 'default "y"'
> + default "y" if EXPERT
>
> WARNING: Use 'default y' not 'default "y"'
> + default "y" if PPC_POWERNV
>
> test --fix capability:
> default n => delete line
> default "m" => default m
> default "n" => default n
> default "y" if EXPERT => default y if EXPERT
> default "y" if PPC_POWERNV => default y if PPC_POWERNV
> default !EXPERT => no change
> default EXPERT => no change
>
> Change since v1:
> discourage default n$
> discourage default "[ynm]"
> discourage default \!?EXPERT
>
> Change since v2:
> (Joe has provided the whole patch and I just post it)
> test Kconfig in a single block
> print precise message such as 'default "m"', not 'default "[ynm]"'
> provide --fix capability
>
> Cc: Joe Perches <joe@perches.com>
> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>
> Signed-off-by: Miles Chen <miles.chen@mediatek.com>
> ---
> scripts/checkpatch.pl | 139 ++++++++++++++++++++++++++----------------
> 1 file changed, 85 insertions(+), 54 deletions(-)
>
> diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
> index 342c7c781ba5..94799f23339c 100755
> --- a/scripts/checkpatch.pl
> +++ b/scripts/checkpatch.pl
> @@ -2932,60 +2932,98 @@ sub process {
> "Do not include the paragraph about writing to the Free Software Foundation's mailing address from the sample GPL notice. The FSF has changed addresses in the past, and may do so again. Linux already includes a copy of the GPL.\n" . $herevet)
> }
>
> -# check for Kconfig help text having a real description
> -# Only applies when adding the entry originally, after that we do not have
> -# sufficient context to determine whether it is indeed long enough.
> - if ($realfile =~ /Kconfig/ &&
> - # 'choice' is usually the last thing on the line (though
> - # Kconfig supports named choices), so use a word boundary
> - # (\b) rather than a whitespace character (\s)
> - $line =~ /^\+\s*(?:config|menuconfig|choice)\b/) {
> - my $length = 0;
> - my $cnt = $realcnt;
> - my $ln = $linenr + 1;
> - my $f;
> - my $is_start = 0;
> - my $is_end = 0;
> - for (; $cnt > 0 && defined $lines[$ln - 1]; $ln++) {
> - $f = $lines[$ln - 1];
> - $cnt-- if ($lines[$ln - 1] !~ /^-/);
> - $is_end = $lines[$ln - 1] =~ /^\+/;
> -
> - next if ($f =~ /^-/);
> - last if (!$file && $f =~ /^\@\@/);
> -
> - if ($lines[$ln - 1] =~ /^\+\s*(?:bool|tristate|prompt)\s*["']/) {
> - $is_start = 1;
> - } elsif ($lines[$ln - 1] =~ /^\+\s*(?:help|---help---)\s*$/) {
> - if ($lines[$ln - 1] =~ "---help---") {
> - WARN("CONFIG_DESCRIPTION",
> - "prefer 'help' over '---help---' for new help texts\n" . $herecurr);
> +# Kconfig tests
> + if ($realfile =~ /Kconfig/) {
> + # check for Kconfig help text having a real description
> + # Only applies when adding the entry originally, after
> + # that we do not have sufficient context to determine
> + # whether it is indeed long enough.
> + # 'choice' is usually the last thing on the line (though
> + # Kconfig supports named choices), so use a word
> + # boundary (\b) rather than a whitespace character (\s)
> + if ($line =~ /^\+\s*(?:config|menuconfig|choice)\b/) {
> + my $length = 0;
> + my $cnt = $realcnt;
> + my $ln = $linenr + 1;
> + my $f;
> + my $is_start = 0;
> + my $is_end = 0;
> + for (; $cnt > 0 && defined $lines[$ln - 1]; $ln++) {
> + $f = $lines[$ln - 1];
> + $cnt-- if ($lines[$ln - 1] !~ /^-/);
> + $is_end = $lines[$ln - 1] =~ /^\+/;
> +
> + next if ($f =~ /^-/);
> + last if (!$file && $f =~ /^\@\@/);
> +
> + if ($lines[$ln - 1] =~ /^\+\s*(?:bool|tristate|prompt)\s*["']/) {
> + $is_start = 1;
> + } elsif ($lines[$ln - 1] =~ /^\+\s*(?:help|---help---)\s*$/) {
> + if ($lines[$ln - 1] =~ "---help---") {
> + WARN("CONFIG_DESCRIPTION",
> + "prefer 'help' over '---help---' for new help texts\n" . $herecurr);
> + }
> + $length = -1;
> + }
> +
> + $f =~ s/^.//;
> + $f =~ s/#.*//;
> + $f =~ s/^\s+//;
> + next if ($f =~ /^$/);
> +
> + # This only checks context lines in the patch
> + # and so hopefully shouldn't trigger false
> + # positives, even though some of these are
> + # common words in help texts
> + if ($f =~ /^\s*(?:config|menuconfig|choice|endchoice|
> + if|endif|menu|endmenu|source)\b/x) {
> + $is_end = 1;
> + last;
> }
> - $length = -1;
> + $length++;
> + }
> + if ($is_start && $is_end && $length < $min_conf_desc_length) {
> + WARN("CONFIG_DESCRIPTION",
> + "please write a paragraph that describes the config symbol fully\n" . $herecurr);
> }
> + #print "is_start<$is_start> is_end<$is_end> length<$length>\n";
> + }
>
> - $f =~ s/^.//;
> - $f =~ s/#.*//;
> - $f =~ s/^\s+//;
> - next if ($f =~ /^$/);
> -
> - # This only checks context lines in the patch
> - # and so hopefully shouldn't trigger false
> - # positives, even though some of these are
> - # common words in help texts
> - if ($f =~ /^\s*(?:config|menuconfig|choice|endchoice|
> - if|endif|menu|endmenu|source)\b/x) {
> - $is_end = 1;
> - last;
> +# discourage the use of boolean for type definition attributes
> + if ($line =~ /^\+\s*\bboolean\b/) {
> + if (WARN("CONFIG_TYPE_BOOLEAN",
> + "Use of boolean is deprecated, please use bool instead\n" . $herecurr) &&
> + $fix) {
> + $fixed[$fixlinenr] =~ s/\bboolean\b/bool/;
> + }
> + }
> +
> +# Kconfig: discourage redundant 'default n'
> + if ($line =~ /^\+\s*default\s+n$/) {
> + if (WARN("CONFIG_DEFAULT_VALUE_STYLE",
> + "'default n' is the default value, no need to write it explicitly\n" . $herecurr) &&
> + $fix) {
> + fix_delete_line($fixlinenr, $rawline);
> }
> - $length++;
> }
> - if ($is_start && $is_end && $length < $min_conf_desc_length) {
> - WARN("CONFIG_DESCRIPTION",
> - "please write a paragraph that describes the config symbol fully\n" . $herecurr);
> +
> +# Kconfig: discourage quoted defaults: use default [ynm], not default "[ynm]"
> + if ($rawline =~ /^\+\s*default\s+"([ynm])"/) {
> + if (WARN("CONFIG_DEFAULT_VALUE_STYLE",
> + "Use 'default $1' not 'default \"$1\"'\n" . $herecurr) &&
> + $fix) {
> + $fixed[$fixlinenr] =~ s/\b(default\s+)"(.)"/$1$2/;
> + }
> + }
> +
> +# Kconfig: discourage using default EXPERT or !EXPERT
> + if ($line =~ /^\+\s*default\s+\!?\s*EXPERT\b/) {
> + WARN("CONFIG_DEFAULT_VALUE_STYLE",
> + "Avoid using default EXPERT\n" . $herecurr);
> }
> - #print "is_start<$is_start> is_end<$is_end> length<$length>\n";
> }
> +# End of Kconfig tests
> +
>
> # check for MAINTAINERS entries that don't have the right form
> if ($realfile =~ /^MAINTAINERS$/ &&
> @@ -2998,13 +3036,6 @@ sub process {
> }
> }
>
> -# discourage the use of boolean for type definition attributes of Kconfig options
> - if ($realfile =~ /Kconfig/ &&
> - $line =~ /^\+\s*\bboolean\b/) {
> - WARN("CONFIG_TYPE_BOOLEAN",
> - "Use of boolean is deprecated, please use bool instead.\n" . $herecurr);
> - }
> -
> if (($realfile =~ /Makefile.*/ || $realfile =~ /Kbuild.*/) &&
> ($line =~ /\+(EXTRA_[A-Z]+FLAGS).*/)) {
> my $flag = $1;
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH v3] checkpatch: add several Kconfig default value tests
@ 2019-07-05 3:16 Miles Chen
2019-07-19 7:36 ` Miles Chen
0 siblings, 1 reply; 3+ messages in thread
From: Miles Chen @ 2019-07-05 3:16 UTC (permalink / raw)
To: Andy Whitcroft, Joe Perches
Cc: linux-kernel, linux-mediatek, wsd_upstream, Miles Chen, Yingjoe Chen
This change adds 3 Kconfig default value tests.
1. discourage default n cases:
e.g.,
default n
2. discourage default "[ynm]" cases:
e.g.,
arch/powerpc/Kconfig: default "y" if PPC_POWERNV
arch/powerpc/Kconfig: default "y" if PPC_POWERNV
arch/powerpc/Kconfig: default "n"
drivers/auxdisplay/Kconfig: default "n"
drivers/crypto/Kconfig: default "m"
drivers/rapidio/devices/Kconfig: default "n"
3. discourage default EXPERT or default !EXPERT cases:
e.g.,
drivers/hid/Kconfig: default !EXPERT
tested cases:
default m
default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
default y if ALPHA_QEMU
default n if PPC_POWERNV
default n
default EXPERT
default !EXPERT
default "m"
default "n"
default "y" if EXPERT
default "y" if PPC_POWERNV
test result:
WARNING: 'default n' is the default value, no need to write it explicitly
+ default n
WARNING: Avoid using default EXPERT
+ default EXPERT
WARNING: Avoid using default EXPERT
+ default !EXPERT
WARNING: Use 'default m' not 'default "m"'
+ default "m"
WARNING: Use 'default n' not 'default "n"'
+ default "n"
WARNING: Use 'default y' not 'default "y"'
+ default "y" if EXPERT
WARNING: Use 'default y' not 'default "y"'
+ default "y" if PPC_POWERNV
test --fix capability:
default n => delete line
default "m" => default m
default "n" => default n
default "y" if EXPERT => default y if EXPERT
default "y" if PPC_POWERNV => default y if PPC_POWERNV
default !EXPERT => no change
default EXPERT => no change
Change since v1:
discourage default n$
discourage default "[ynm]"
discourage default \!?EXPERT
Change since v2:
(Joe has provided the whole patch and I just post it)
test Kconfig in a single block
print precise message such as 'default "m"', not 'default "[ynm]"'
provide --fix capability
Cc: Joe Perches <joe@perches.com>
Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
---
scripts/checkpatch.pl | 139 ++++++++++++++++++++++++++----------------
1 file changed, 85 insertions(+), 54 deletions(-)
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 342c7c781ba5..94799f23339c 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -2932,60 +2932,98 @@ sub process {
"Do not include the paragraph about writing to the Free Software Foundation's mailing address from the sample GPL notice. The FSF has changed addresses in the past, and may do so again. Linux already includes a copy of the GPL.\n" . $herevet)
}
-# check for Kconfig help text having a real description
-# Only applies when adding the entry originally, after that we do not have
-# sufficient context to determine whether it is indeed long enough.
- if ($realfile =~ /Kconfig/ &&
- # 'choice' is usually the last thing on the line (though
- # Kconfig supports named choices), so use a word boundary
- # (\b) rather than a whitespace character (\s)
- $line =~ /^\+\s*(?:config|menuconfig|choice)\b/) {
- my $length = 0;
- my $cnt = $realcnt;
- my $ln = $linenr + 1;
- my $f;
- my $is_start = 0;
- my $is_end = 0;
- for (; $cnt > 0 && defined $lines[$ln - 1]; $ln++) {
- $f = $lines[$ln - 1];
- $cnt-- if ($lines[$ln - 1] !~ /^-/);
- $is_end = $lines[$ln - 1] =~ /^\+/;
-
- next if ($f =~ /^-/);
- last if (!$file && $f =~ /^\@\@/);
-
- if ($lines[$ln - 1] =~ /^\+\s*(?:bool|tristate|prompt)\s*["']/) {
- $is_start = 1;
- } elsif ($lines[$ln - 1] =~ /^\+\s*(?:help|---help---)\s*$/) {
- if ($lines[$ln - 1] =~ "---help---") {
- WARN("CONFIG_DESCRIPTION",
- "prefer 'help' over '---help---' for new help texts\n" . $herecurr);
+# Kconfig tests
+ if ($realfile =~ /Kconfig/) {
+ # check for Kconfig help text having a real description
+ # Only applies when adding the entry originally, after
+ # that we do not have sufficient context to determine
+ # whether it is indeed long enough.
+ # 'choice' is usually the last thing on the line (though
+ # Kconfig supports named choices), so use a word
+ # boundary (\b) rather than a whitespace character (\s)
+ if ($line =~ /^\+\s*(?:config|menuconfig|choice)\b/) {
+ my $length = 0;
+ my $cnt = $realcnt;
+ my $ln = $linenr + 1;
+ my $f;
+ my $is_start = 0;
+ my $is_end = 0;
+ for (; $cnt > 0 && defined $lines[$ln - 1]; $ln++) {
+ $f = $lines[$ln - 1];
+ $cnt-- if ($lines[$ln - 1] !~ /^-/);
+ $is_end = $lines[$ln - 1] =~ /^\+/;
+
+ next if ($f =~ /^-/);
+ last if (!$file && $f =~ /^\@\@/);
+
+ if ($lines[$ln - 1] =~ /^\+\s*(?:bool|tristate|prompt)\s*["']/) {
+ $is_start = 1;
+ } elsif ($lines[$ln - 1] =~ /^\+\s*(?:help|---help---)\s*$/) {
+ if ($lines[$ln - 1] =~ "---help---") {
+ WARN("CONFIG_DESCRIPTION",
+ "prefer 'help' over '---help---' for new help texts\n" . $herecurr);
+ }
+ $length = -1;
+ }
+
+ $f =~ s/^.//;
+ $f =~ s/#.*//;
+ $f =~ s/^\s+//;
+ next if ($f =~ /^$/);
+
+ # This only checks context lines in the patch
+ # and so hopefully shouldn't trigger false
+ # positives, even though some of these are
+ # common words in help texts
+ if ($f =~ /^\s*(?:config|menuconfig|choice|endchoice|
+ if|endif|menu|endmenu|source)\b/x) {
+ $is_end = 1;
+ last;
}
- $length = -1;
+ $length++;
+ }
+ if ($is_start && $is_end && $length < $min_conf_desc_length) {
+ WARN("CONFIG_DESCRIPTION",
+ "please write a paragraph that describes the config symbol fully\n" . $herecurr);
}
+ #print "is_start<$is_start> is_end<$is_end> length<$length>\n";
+ }
- $f =~ s/^.//;
- $f =~ s/#.*//;
- $f =~ s/^\s+//;
- next if ($f =~ /^$/);
-
- # This only checks context lines in the patch
- # and so hopefully shouldn't trigger false
- # positives, even though some of these are
- # common words in help texts
- if ($f =~ /^\s*(?:config|menuconfig|choice|endchoice|
- if|endif|menu|endmenu|source)\b/x) {
- $is_end = 1;
- last;
+# discourage the use of boolean for type definition attributes
+ if ($line =~ /^\+\s*\bboolean\b/) {
+ if (WARN("CONFIG_TYPE_BOOLEAN",
+ "Use of boolean is deprecated, please use bool instead\n" . $herecurr) &&
+ $fix) {
+ $fixed[$fixlinenr] =~ s/\bboolean\b/bool/;
+ }
+ }
+
+# Kconfig: discourage redundant 'default n'
+ if ($line =~ /^\+\s*default\s+n$/) {
+ if (WARN("CONFIG_DEFAULT_VALUE_STYLE",
+ "'default n' is the default value, no need to write it explicitly\n" . $herecurr) &&
+ $fix) {
+ fix_delete_line($fixlinenr, $rawline);
}
- $length++;
}
- if ($is_start && $is_end && $length < $min_conf_desc_length) {
- WARN("CONFIG_DESCRIPTION",
- "please write a paragraph that describes the config symbol fully\n" . $herecurr);
+
+# Kconfig: discourage quoted defaults: use default [ynm], not default "[ynm]"
+ if ($rawline =~ /^\+\s*default\s+"([ynm])"/) {
+ if (WARN("CONFIG_DEFAULT_VALUE_STYLE",
+ "Use 'default $1' not 'default \"$1\"'\n" . $herecurr) &&
+ $fix) {
+ $fixed[$fixlinenr] =~ s/\b(default\s+)"(.)"/$1$2/;
+ }
+ }
+
+# Kconfig: discourage using default EXPERT or !EXPERT
+ if ($line =~ /^\+\s*default\s+\!?\s*EXPERT\b/) {
+ WARN("CONFIG_DEFAULT_VALUE_STYLE",
+ "Avoid using default EXPERT\n" . $herecurr);
}
- #print "is_start<$is_start> is_end<$is_end> length<$length>\n";
}
+# End of Kconfig tests
+
# check for MAINTAINERS entries that don't have the right form
if ($realfile =~ /^MAINTAINERS$/ &&
@@ -2998,13 +3036,6 @@ sub process {
}
}
-# discourage the use of boolean for type definition attributes of Kconfig options
- if ($realfile =~ /Kconfig/ &&
- $line =~ /^\+\s*\bboolean\b/) {
- WARN("CONFIG_TYPE_BOOLEAN",
- "Use of boolean is deprecated, please use bool instead.\n" . $herecurr);
- }
-
if (($realfile =~ /Makefile.*/ || $realfile =~ /Kbuild.*/) &&
($line =~ /\+(EXTRA_[A-Z]+FLAGS).*/)) {
my $flag = $1;
--
2.18.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-07-31 15:18 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-31 15:13 [PATCH v3] checkpatch: add several Kconfig default value tests Miles Chen
-- strict thread matches above, loose matches on Subject: below --
2019-07-05 3:16 Miles Chen
2019-07-19 7:36 ` Miles Chen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).