linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hubert Feurstein <h.feurstein@gmail.com>
To: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Hubert Feurstein <h.feurstein@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	"David S. Miller" <davem@davemloft.net>
Subject: [PATCH net] net: dsa: mv88e6xxx: drop adjust_link to enabled phylink
Date: Wed, 31 Jul 2019 17:42:39 +0200	[thread overview]
Message-ID: <20190731154239.19270-1-h.feurstein@gmail.com> (raw)

We have to drop the adjust_link callback in order to finally migrate to
phylink.

Otherwise we get the following warning during startup:
  "mv88e6xxx 2188000.ethernet-1:10: Using legacy PHYLIB callbacks. Please
   migrate to PHYLINK!"

The warning is generated in the function dsa_port_link_register_of in
dsa/port.c:

  int dsa_port_link_register_of(struct dsa_port *dp)
  {
  	struct dsa_switch *ds = dp->ds;

  	if (!ds->ops->adjust_link)
  		return dsa_port_phylink_register(dp);

  	dev_warn(ds->dev,
  		 "Using legacy PHYLIB callbacks. Please migrate to PHYLINK!\n");
  	[...]
  }

Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 26 --------------------------
 1 file changed, 26 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 366f70bfe055..37e8babd035f 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -27,7 +27,6 @@
 #include <linux/platform_data/mv88e6xxx.h>
 #include <linux/netdevice.h>
 #include <linux/gpio/consumer.h>
-#include <linux/phy.h>
 #include <linux/phylink.h>
 #include <net/dsa.h>
 
@@ -482,30 +481,6 @@ static int mv88e6xxx_phy_is_internal(struct dsa_switch *ds, int port)
 	return port < chip->info->num_internal_phys;
 }
 
-/* We expect the switch to perform auto negotiation if there is a real
- * phy. However, in the case of a fixed link phy, we force the port
- * settings from the fixed link settings.
- */
-static void mv88e6xxx_adjust_link(struct dsa_switch *ds, int port,
-				  struct phy_device *phydev)
-{
-	struct mv88e6xxx_chip *chip = ds->priv;
-	int err;
-
-	if (!phy_is_pseudo_fixed_link(phydev) &&
-	    mv88e6xxx_phy_is_internal(ds, port))
-		return;
-
-	mv88e6xxx_reg_lock(chip);
-	err = mv88e6xxx_port_setup_mac(chip, port, phydev->link, phydev->speed,
-				       phydev->duplex, phydev->pause,
-				       phydev->interface);
-	mv88e6xxx_reg_unlock(chip);
-
-	if (err && err != -EOPNOTSUPP)
-		dev_err(ds->dev, "p%d: failed to configure MAC\n", port);
-}
-
 static void mv88e6065_phylink_validate(struct mv88e6xxx_chip *chip, int port,
 				       unsigned long *mask,
 				       struct phylink_link_state *state)
@@ -4755,7 +4730,6 @@ static int mv88e6xxx_port_egress_floods(struct dsa_switch *ds, int port,
 static const struct dsa_switch_ops mv88e6xxx_switch_ops = {
 	.get_tag_protocol	= mv88e6xxx_get_tag_protocol,
 	.setup			= mv88e6xxx_setup,
-	.adjust_link		= mv88e6xxx_adjust_link,
 	.phylink_validate	= mv88e6xxx_validate,
 	.phylink_mac_link_state	= mv88e6xxx_link_state,
 	.phylink_mac_config	= mv88e6xxx_mac_config,
-- 
2.22.0


             reply	other threads:[~2019-07-31 15:43 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-31 15:42 Hubert Feurstein [this message]
2019-08-04 15:04 ` [PATCH net] net: dsa: mv88e6xxx: drop adjust_link to enabled phylink Andrew Lunn
2019-08-04 15:10 ` Andrew Lunn
2019-08-05  8:49   ` Hubert Feurstein
2019-08-13 19:50     ` Florian Fainelli
2019-08-04 19:37 ` Vladimir Oltean
2019-08-05 17:56 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190731154239.19270-1-h.feurstein@gmail.com \
    --to=h.feurstein@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).