linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: linux-serial@vger.kernel.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
	Stefan Agner <stefan@agner.ch>, Chris Healy <cphealy@gmail.com>,
	Cory Tusar <cory.tusar@zii.aero>,
	Lucas Stach <l.stach@pengutronix.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jslaby@suse.com>,
	linux-imx@nxp.com, linux-kernel@vger.kernel.org
Subject: [PATCH v2 04/23] tty: serial: fsl_lpuart: Simplify RX/TX IRQ handlers
Date: Wed, 31 Jul 2019 10:30:26 -0700	[thread overview]
Message-ID: <20190731173045.11718-5-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190731173045.11718-1-andrew.smirnov@gmail.com>

It appears that lpuart_rxint, lpuart_txint and lpuart32_rxint were
modelled after identical function found in UART driver for
i.MX. However, while said functions are used as individual IRQ
handlers in i.MX driver (in case of i.MX1), it is not the case for
LPUART. Given that, there's no need for us to restrict the prototype
of the handler to irqreturn_t foo(int, void *) and we can drop all of
uneened boilerplate code by changing it void foo(struct lpuart_port *).

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-imx@nxp.com
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/tty/serial/fsl_lpuart.c | 20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 12ddca608eba..c60c5354a5b9 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -771,9 +771,8 @@ static unsigned int lpuart32_tx_empty(struct uart_port *port)
 	return 0;
 }
 
-static irqreturn_t lpuart_txint(int irq, void *dev_id)
+static void lpuart_txint(struct lpuart_port *sport)
 {
-	struct lpuart_port *sport = dev_id;
 	struct circ_buf *xmit = &sport->port.state->xmit;
 	unsigned long flags;
 
@@ -804,12 +803,10 @@ static irqreturn_t lpuart_txint(int irq, void *dev_id)
 
 out:
 	spin_unlock_irqrestore(&sport->port.lock, flags);
-	return IRQ_HANDLED;
 }
 
-static irqreturn_t lpuart_rxint(int irq, void *dev_id)
+static void lpuart_rxint(struct lpuart_port *sport)
 {
-	struct lpuart_port *sport = dev_id;
 	unsigned int flg, ignored = 0, overrun = 0;
 	struct tty_port *port = &sport->port.state->port;
 	unsigned long flags;
@@ -878,12 +875,10 @@ static irqreturn_t lpuart_rxint(int irq, void *dev_id)
 	spin_unlock_irqrestore(&sport->port.lock, flags);
 
 	tty_flip_buffer_push(port);
-	return IRQ_HANDLED;
 }
 
-static irqreturn_t lpuart32_rxint(int irq, void *dev_id)
+static void lpuart32_rxint(struct lpuart_port *sport)
 {
-	struct lpuart_port *sport = dev_id;
 	unsigned int flg, ignored = 0;
 	struct tty_port *port = &sport->port.state->port;
 	unsigned long flags;
@@ -942,7 +937,6 @@ static irqreturn_t lpuart32_rxint(int irq, void *dev_id)
 	spin_unlock_irqrestore(&sport->port.lock, flags);
 
 	tty_flip_buffer_push(port);
-	return IRQ_HANDLED;
 }
 
 static irqreturn_t lpuart_int(int irq, void *dev_id)
@@ -953,10 +947,10 @@ static irqreturn_t lpuart_int(int irq, void *dev_id)
 	sts = readb(sport->port.membase + UARTSR1);
 
 	if (sts & UARTSR1_RDRF)
-		lpuart_rxint(irq, dev_id);
+		lpuart_rxint(sport);
 
 	if (sts & UARTSR1_TDRE)
-		lpuart_txint(irq, dev_id);
+		lpuart_txint(sport);
 
 	return IRQ_HANDLED;
 }
@@ -971,10 +965,10 @@ static irqreturn_t lpuart32_int(int irq, void *dev_id)
 	rxcount = rxcount >> UARTWATER_RXCNT_OFF;
 
 	if ((sts & UARTSTAT_RDRF || rxcount > 0) && !sport->lpuart_dma_rx_use)
-		lpuart32_rxint(irq, dev_id);
+		lpuart32_rxint(sport);
 
 	if ((sts & UARTSTAT_TDRE) && !sport->lpuart_dma_tx_use)
-		lpuart_txint(irq, dev_id);
+		lpuart_txint(sport);
 
 	lpuart32_write(&sport->port, sts, UARTSTAT);
 	return IRQ_HANDLED;
-- 
2.21.0


  parent reply	other threads:[~2019-07-31 17:31 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-31 17:30 [PATCH v2 00/23] LPUART fixes and improvements Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 01/23] tty: serial: fsl_lpuart: fix framing error handling when using DMA Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 02/23] tty: serial: fsl_lpuart: flush receive FIFO after overruns Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 03/23] tty: serial: fsl_lpuart: Flush HW FIFOs in .flush_buffer Andrey Smirnov
2019-07-31 17:30 ` Andrey Smirnov [this message]
2019-07-31 17:30 ` [PATCH v2 05/23] tty: serial: fsl_lpuart: Fix bogus indentation Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 06/23] tty: serial: fsl_lpuart: Drop unnecessary uart_write_wakeup() Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 07/23] tty: serial: fsl_lpuart: Fix issue in software flow control Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 08/23] tty: serial: fls_lpuart: Split shared TX IRQ handler into two Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 09/23] tty: serial: fsl_lpuart: Drop no-op bit opearation Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 10/23] tty: serial: fsl_lpuart: Drop unnecessary extra parenthesis Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 11/23] tty: serial: fsl_lpuart: Clear CSTOPB unconditionally Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 12/23] tty: serial: fsl_lpuart: Use appropriate lpuart32_* I/O funcs Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 13/23] tty: serial: fsl_lpuart: Introduce lpuart_wait_bit_set() Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 14/23] tty: serial: fsl_lpuart: Use cpu_relax() instead of barrier() Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 15/23] tty: serial: fsl_lpuart: Introduce lpuart_stopped_or_empty() Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 16/23] tty: serial: fsl_lpuart: Drop unnecessary lpuart*_stop_tx() Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 17/23] tty: serial: fsl_lpuart: Introduce lpuart_dma_shutdown() Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 18/23] tty: serial: fsl_lpuart: Introduce lpuart_tx_dma_startup() Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 19/23] tty: serial: fsl_lpuart: Introduce lpuart_rx_dma_startup() Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 20/23] tty: serial: fsl_lpuart: Introduce lpuart32_configure() Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 21/23] tty: serial: fsl_lpuart: Introduce lpuart*_setup_watermark_enable() Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 22/23] tty: serial: fsl_lpuart: Don't enable TIE in .startup() or .resume() Andrey Smirnov
2019-07-31 17:30 ` [PATCH v2 23/23] tty: serial: fsl_lpuart: Ignore TX/RX interrupts if DMA is enabled Andrey Smirnov
2019-07-31 17:59 ` [PATCH v2 00/23] LPUART fixes and improvements Fabio Estevam
2019-08-01 15:14   ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190731173045.11718-5-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=cory.tusar@zii.aero \
    --cc=cphealy@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jslaby@suse.com \
    --cc=l.stach@pengutronix.de \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=stefan@agner.ch \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).