From: Arnd Bergmann <arnd@arndb.de>
To: soc@kernel.org, linux-arm-kernel@lists.infradead.org,
Vladimir Zapolskiy <vz@mleia.com>,
Sylvain Lemieux <slemieux.tyco@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Gregory Clement <gregory.clement@bootlin.com>,
Linus Walleij <linus.walleij@linaro.org>
Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Alan Stern <stern@rowland.harvard.edu>,
Guenter Roeck <linux@roeck-us.net>,
linux-gpio@vger.kernel.org, netdev@vger.kernel.org,
linux-serial@vger.kernel.org, linux-usb@vger.kernel.org,
linux-watchdog@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
linux-kernel@vger.kernel.org
Subject: [PATCH 10/14] ARM: lpc32xx: clean up header files
Date: Wed, 31 Jul 2019 21:56:52 +0200 [thread overview]
Message-ID: <20190731195713.3150463-11-arnd@arndb.de> (raw)
In-Reply-To: <20190731195713.3150463-1-arnd@arndb.de>
All device drivers have stopped relying on mach/*.h headers,
so move the remaining headers into arch/arm/mach-lpc32xx/lpc32xx.h
to prepare for multiplatform builds.
The mach/entry-macro.S file has been unused for a long time now
and can simply get removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-lpc32xx/common.c | 3 +-
.../mach-lpc32xx/include/mach/entry-macro.S | 28 -------------------
arch/arm/mach-lpc32xx/include/mach/hardware.h | 25 -----------------
.../mach-lpc32xx/include/mach/uncompress.h | 4 +--
.../{include/mach/platform.h => lpc32xx.h} | 18 ++++++++++--
arch/arm/mach-lpc32xx/pm.c | 3 +-
arch/arm/mach-lpc32xx/serial.c | 3 +-
arch/arm/mach-lpc32xx/suspend.S | 3 +-
8 files changed, 21 insertions(+), 66 deletions(-)
delete mode 100644 arch/arm/mach-lpc32xx/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-lpc32xx/include/mach/hardware.h
rename arch/arm/mach-lpc32xx/{include/mach/platform.h => lpc32xx.h} (98%)
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index a475339333c1..304ea61a0716 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -13,8 +13,7 @@
#include <asm/mach/map.h>
#include <asm/system_info.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
+#include "lpc32xx.h"
#include "common.h"
/*
diff --git a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
deleted file mode 100644
index eec0f5f7e722..000000000000
--- a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-lpc32xx/include/mach/entry-macro.S
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- */
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
-#define LPC32XX_INTC_MASKED_STATUS_OFS 0x8
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IO_ADDRESS(LPC32XX_MIC_BASE)
- .endm
-
-/*
- * Return IRQ number in irqnr. Also return processor Z flag status in CPSR
- * as set if an interrupt is pending.
- */
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, [\base, #LPC32XX_INTC_MASKED_STATUS_OFS]
- clz \irqnr, \irqstat
- rsb \irqnr, \irqnr, #31
- teq \irqstat, #0
- .endm
diff --git a/arch/arm/mach-lpc32xx/include/mach/hardware.h b/arch/arm/mach-lpc32xx/include/mach/hardware.h
deleted file mode 100644
index 4866f096ffce..000000000000
--- a/arch/arm/mach-lpc32xx/include/mach/hardware.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-lpc32xx/include/mach/hardware.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * Start of virtual addresses for IO devices
- */
-#define IO_BASE 0xF0000000
-
-/*
- * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0
- */
-#define IO_ADDRESS(x) IOMEM(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
- IO_BASE)
-
-#define io_p2v(x) ((void __iomem *) (unsigned long) IO_ADDRESS(x))
-#define io_v2p(x) ((((x) & 0x0ff00000) << 4) | ((x) & 0x000fffff))
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/uncompress.h b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
index a568812a0b91..74b7aa0da0e4 100644
--- a/arch/arm/mach-lpc32xx/include/mach/uncompress.h
+++ b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
@@ -12,15 +12,13 @@
#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
/*
* Uncompress output is hardcoded to standard UART 5
*/
#define UART_FIFO_CTL_TX_RESET (1 << 2)
#define UART_STATUS_TX_MT (1 << 6)
+#define LPC32XX_UART5_BASE 0x40090000
#define _UARTREG(x) (void __iomem *)(LPC32XX_UART5_BASE + (x))
diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/lpc32xx.h
similarity index 98%
rename from arch/arm/mach-lpc32xx/include/mach/platform.h
rename to arch/arm/mach-lpc32xx/lpc32xx.h
index 1c53790444fc..5eeb884a1993 100644
--- a/arch/arm/mach-lpc32xx/include/mach/platform.h
+++ b/arch/arm/mach-lpc32xx/lpc32xx.h
@@ -7,8 +7,8 @@
* Copyright (C) 2010 NXP Semiconductors
*/
-#ifndef __ASM_ARCH_PLATFORM_H
-#define __ASM_ARCH_PLATFORM_H
+#ifndef __ARM_LPC32XX_H
+#define __ARM_LPC32XX_H
#define _SBF(f, v) ((v) << (f))
#define _BIT(n) _SBF(n, 1)
@@ -700,4 +700,18 @@
#define LPC32XX_USB_OTG_DEV_CLOCK_ON _BIT(1)
#define LPC32XX_USB_OTG_HOST_CLOCK_ON _BIT(0)
+/*
+ * Start of virtual addresses for IO devices
+ */
+#define IO_BASE 0xF0000000
+
+/*
+ * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0
+ */
+#define IO_ADDRESS(x) IOMEM(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
+ IO_BASE)
+
+#define io_p2v(x) ((void __iomem *) (unsigned long) IO_ADDRESS(x))
+#define io_v2p(x) ((((x) & 0x0ff00000) << 4) | ((x) & 0x000fffff))
+
#endif
diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c
index 32bca351a73b..b27fa1b9f56c 100644
--- a/arch/arm/mach-lpc32xx/pm.c
+++ b/arch/arm/mach-lpc32xx/pm.c
@@ -70,8 +70,7 @@
#include <asm/cacheflush.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
+#include "lpc32xx.h"
#include "common.h"
#define TEMP_IRAM_AREA IO_ADDRESS(LPC32XX_IRAM_BASE)
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index cfb35e5691cd..3e765c4bf986 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -16,8 +16,7 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
+#include "lpc32xx.h"
#include "common.h"
#define LPC32XX_SUART_FIFO_SIZE 64
diff --git a/arch/arm/mach-lpc32xx/suspend.S b/arch/arm/mach-lpc32xx/suspend.S
index 374f9f07fe48..3f0a8282ef6f 100644
--- a/arch/arm/mach-lpc32xx/suspend.S
+++ b/arch/arm/mach-lpc32xx/suspend.S
@@ -11,8 +11,7 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/platform.h>
-#include <mach/hardware.h>
+#include "lpc32xx.h"
/* Using named register defines makes the code easier to follow */
#define WORK1_REG r0
--
2.20.0
next prev parent reply other threads:[~2019-07-31 20:03 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20190731195713.3150463-1-arnd@arndb.de>
2019-07-31 19:56 ` [PATCH 01/14] usb: ohci-nxp: enable compile-testing Arnd Bergmann
2019-08-01 5:58 ` Greg Kroah-Hartman
2019-07-31 19:56 ` [PATCH 02/14] usb: udc: lpc32xx: allow compile-testing Arnd Bergmann
2019-08-01 5:58 ` Greg Kroah-Hartman
2019-08-05 12:47 ` Sylvain Lemieux
2019-07-31 19:56 ` [PATCH 03/14] watchdog: pnx4008_wdt: " Arnd Bergmann
2019-07-31 20:23 ` Guenter Roeck
2019-07-31 20:26 ` Arnd Bergmann
2019-07-31 20:36 ` Guenter Roeck
2019-08-05 12:42 ` Sylvain Lemieux
2019-07-31 19:56 ` [PATCH 04/14] serial: lpc32xx_hs: " Arnd Bergmann
2019-08-01 5:58 ` Greg Kroah-Hartman
2019-08-05 12:43 ` Sylvain Lemieux
2019-07-31 19:56 ` [PATCH 05/14] gpio: lpc32xx: allow building on non-lpc32xx targets Arnd Bergmann
2019-08-02 7:10 ` Bartosz Golaszewski
2019-08-02 11:19 ` Arnd Bergmann
2019-08-05 8:27 ` Bartosz Golaszewski
2019-08-09 14:18 ` Arnd Bergmann
2019-08-06 20:02 ` Sylvain Lemieux
2019-08-09 14:19 ` Arnd Bergmann
2019-07-31 19:56 ` [PATCH 06/14] net: lpc-enet: factor out iram access Arnd Bergmann
2019-07-31 19:56 ` [PATCH 07/14] net: lpc-enet: move phy setup into platform code Arnd Bergmann
2019-08-06 20:11 ` Sylvain Lemieux
2019-08-06 20:12 ` Sylvain Lemieux
2019-07-31 19:56 ` [PATCH 08/14] net: lpc-enet: allow compile testing Arnd Bergmann
2019-08-06 20:13 ` Sylvain Lemieux
2019-07-31 19:56 ` [PATCH 09/14] serial: lpc32xx: " Arnd Bergmann
2019-08-01 5:59 ` Greg Kroah-Hartman
2019-07-31 19:56 ` Arnd Bergmann [this message]
2019-08-06 20:16 ` [PATCH 10/14] ARM: lpc32xx: clean up header files Sylvain Lemieux
2019-07-31 19:56 ` [PATCH 11/14] ARM: lpc32xx: allow multiplatform build Arnd Bergmann
2019-07-31 19:56 ` [PATCH 12/14] ARM: dove: clean up mach/*.h headers Arnd Bergmann
2019-07-31 19:56 ` [PATCH 13/14] ARM: orion/mvebu: unify debug-ll virtual addresses Arnd Bergmann
2019-07-31 19:56 ` [PATCH 14/14] ARM: dove: multiplatform support Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190731195713.3150463-11-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=gregkh@linuxfoundation.org \
--cc=gregory.clement@bootlin.com \
--cc=jason@lakedaemon.net \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=linux@roeck-us.net \
--cc=netdev@vger.kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=slemieux.tyco@gmail.com \
--cc=soc@kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=vz@mleia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).