* [PATCH v2 1/1] arm64: dts: rockchip: Add support for TB-96AI board
@ 2019-08-05 1:57 Elon Zhang
2019-08-05 11:28 ` Manivannan Sadhasivam
2019-09-01 4:36 ` Heiko Stuebner
0 siblings, 2 replies; 4+ messages in thread
From: Elon Zhang @ 2019-08-05 1:57 UTC (permalink / raw)
To: heiko, mark.rutland, robh+dt
Cc: manivannan.sadhasivam, linux-rockchip, linux-arm-kernel,
linux-kernel, devicetree, Elon Zhang
Add devicetree support for RK3399Pro TB-96AI board, one of
the 96Boards family.
The TB-96AI board is a 96Boards Compute SOM design, launched
by Linaro, Rockchip and Beiqicloud.
More information can be obtained from the following websites:
1.https://www.96boards.org/product/tb-96ai/
2.http://t.rock-chips.com/
3.http://www.beiqicloud.com/
This patch add basic node for the board and support booting up
to Fedora.
Signed-off-by: Elon Zhang <zhangzj@rock-chips.com>
---
changes since v1:
- remove needless node
- using a standard LED formats for 96Boards
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3399pro-tb-96ai.dts | 560 ++++++++++++++++++
2 files changed, 561 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 5f2687acbf94..3d6c8d4363b5 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -27,3 +27,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-tb-96ai.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
new file mode 100644
index 000000000000..767b37b854ba
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
@@ -0,0 +1,560 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399pro.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ compatible = "beiqi,rk3399pro-tb-96ai", "rockchip,rk3399pro";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ xin32k: xin32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ #clock-cells = <0>;
+ };
+
+ vcc5v0_sys: vccsys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&work_led1>,<&work_led2>,<&work_led3>;
+
+ work_led1 {
+ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ label = "system_work_led1";
+ retain-state-suspended;
+ };
+
+ work_led2 {
+ gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ label = "system_work_led2";
+ retain-state-suspended;
+ };
+
+ work_led3 {
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ label = "system_work_led3";
+ retain-state-suspended;
+ };
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ i2c-scl-rising-time-ns = <180>;
+ i2c-scl-falling-time-ns = <30>;
+ clock-frequency = <400000>;
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default", "pmic-sleep",
+ "pmic-power-off", "pmic-reset";
+ pinctrl-0 = <&pmic_int_l>;
+ pinctrl-1 = <&soc_slppin_slp>, <&rk809_slppin_slp>;
+ pinctrl-2 = <&soc_slppin_gpio>, <&rk809_slppin_pwrdn>;
+ pinctrl-3 = <&soc_slppin_gpio>,<&rk809_slppin_null>;
+ rockchip,system-power-controller;
+ pmic-reset-func = <1>;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc_buck5>;
+ vcc6-supply = <&vcc_buck5>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+
+ pwrkey {
+ status = "okay";
+ };
+
+ rtc {
+ status = "okay";
+ };
+
+ pinctrl_rk8xx: pinctrl_rk8xx {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ rk809_slppin_null: rk809_slppin_null {
+ pins = "gpio_slp";
+ function = "pin_fun0";
+ };
+
+ rk809_slppin_slp: rk809_slppin_slp {
+ pins = "gpio_slp";
+ function = "pin_fun1";
+ };
+
+ rk809_slppin_pwrdn: rk809_slppin_pwrdn {
+ pins = "gpio_slp";
+ function = "pin_fun2";
+ };
+
+ rk809_slppin_rst: rk809_slppin_rst {
+ pins = "gpio_slp";
+ function = "pin_fun3";
+ };
+ };
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vdd_center";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vdd_cpu_l";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc3v3_sys: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vcc3v3_sys";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_buck5: DCDC_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-name = "vcc_buck5";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2200000>;
+ };
+ };
+
+ vcca_0v9: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vcca_0v9";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-name = "vcc_1v8";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc0v9_soc: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-name = "vcc0v9_soc";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-name = "vcca_1v8";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd1v5_dvp: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+
+ regulator-name = "vdd1v5_dvp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+
+ regulator-name = "vcc_1v5";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-name = "vcc_3v0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_sd: LDO_REG9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-name = "vcc_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc5v0_usb: SWITCH_REG1 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ regulator-name = "vcc5v0_usb";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_3v3: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-name = "vccio_3v3";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@1c {
+ compatible = "fcs,fan53555";
+ reg = <0x1c>;
+ vin-supply = <&vcc5v0_sys>;
+ pinctrl-0 = <&vsel1_gpio>;
+ vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <2300>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-state = <3>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@10 {
+ compatible = "fcs,fan53555";
+ status = "okay";
+ reg = <0x10>;
+ vin-supply = <&vcc5v0_sys>;
+ pinctrl-0 = <&vsel2_gpio>;
+ vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <735000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <2300>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c8 {
+ status = "okay";
+ i2c-scl-rising-time-ns = <345>;
+ i2c-scl-falling-time-ns = <11>;
+ clock-frequency = <100000>;
+};
+
+&io_domains {
+ status = "okay";
+ bt656-supply = <&vcca_1v8>; /* APIO2_VDD */
+ audio-supply = <&vcca_1v8>; /* APIO5_VDD */
+ sdmmc-supply = <&vccio_sd>; /* SDMMC0_VDD */
+ gpio1830-supply = <&vcc_1v8>; /* APIO4_VDD */
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&npu_ref_clk>;
+
+ leds {
+ work_led1: work_led1 {
+ rockchip,pins =
+ <2 5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ work_led2: work_led2 {
+ rockchip,pins =
+ <2 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ work_led3: work_led3 {
+ rockchip,pins =
+ <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ npu_clk {
+ npu_ref_clk: npu-ref-clk {
+ rockchip,pins =
+ <0 RK_PA2 1 &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <1 RK_PC2 0 &pcfg_pull_up>;
+ };
+
+ soc_slppin_gpio: soc-slppin-gpio {
+ rockchip,pins =
+ <1 RK_PA5 0 &pcfg_output_low>;
+ };
+
+ soc_slppin_slp: soc-slppin-slp {
+ rockchip,pins =
+ <1 RK_PA5 1 &pcfg_pull_down>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins =
+ <1 RK_PC1 0 &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins =
+ <1 RK_PB6 0 &pcfg_pull_down>;
+ };
+ };
+
+ usb3 {
+ usb3_host_en: usb3-host-en {
+ rockchip,pins =
+ <2 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ status = "okay";
+ pmu1830-supply = <&vcc_1v8>;
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vcc_1v8>;
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ non-removable;
+ keep-power-in-suspend;
+ mmc-hs400-enhanced-strobe;
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_usb>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_host_en>;
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ snps,dis-u3-autosuspend-quirk;
+ status = "okay";
+};
+
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2 1/1] arm64: dts: rockchip: Add support for TB-96AI board
2019-08-05 1:57 [PATCH v2 1/1] arm64: dts: rockchip: Add support for TB-96AI board Elon Zhang
@ 2019-08-05 11:28 ` Manivannan Sadhasivam
2019-08-20 2:35 ` Elon Zhang
2019-09-01 4:36 ` Heiko Stuebner
1 sibling, 1 reply; 4+ messages in thread
From: Manivannan Sadhasivam @ 2019-08-05 11:28 UTC (permalink / raw)
To: Elon Zhang
Cc: heiko, mark.rutland, robh+dt, linux-rockchip, linux-arm-kernel,
linux-kernel, devicetree
Hi Elon,
Thanks for the v2. Still the DT needs to be cleaned up a bit. I have tested this
patch on TB96-AI SOM/Carrier board and found that the USB ports are not working
at all! Do we need to change any switch settings?
Comments are inline.
On Mon, Aug 05, 2019 at 09:57:55AM +0800, Elon Zhang wrote:
> Add devicetree support for RK3399Pro TB-96AI board, one of
> the 96Boards family.
>
> The TB-96AI board is a 96Boards Compute SOM design, launched
> by Linaro, Rockchip and Beiqicloud.
>
> More information can be obtained from the following websites:
> 1.https://www.96boards.org/product/tb-96ai/
> 2.http://t.rock-chips.com/
> 3.http://www.beiqicloud.com/
>
> This patch add basic node for the board and support booting up
> to Fedora.
>
> Signed-off-by: Elon Zhang <zhangzj@rock-chips.com>
> ---
> changes since v1:
> - remove needless node
> - using a standard LED formats for 96Boards
>
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> .../boot/dts/rockchip/rk3399pro-tb-96ai.dts | 560 ++++++++++++++++++
> 2 files changed, 561 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
>
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 5f2687acbf94..3d6c8d4363b5 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -27,3 +27,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-tb-96ai.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
> new file mode 100644
> index 000000000000..767b37b854ba
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
> @@ -0,0 +1,560 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
> + */
> +
> +/dts-v1/;
> +#include "rk3399pro.dtsi"
> +#include "rk3399-opp.dtsi"
> +
> +/ {
> + compatible = "beiqi,rk3399pro-tb-96ai", "rockchip,rk3399pro";
> +
> + chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + xin32k: xin32k {
> + compatible = "fixed-clock";
> + clock-frequency = <32768>;
> + clock-output-names = "xin32k";
> + #clock-cells = <0>;
> + };
> +
> + vcc5v0_sys: vccsys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + };
> +
> + leds {
Still the LEDs are not defined as per the format I shared before...
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&work_led1>,<&work_led2>,<&work_led3>;
> +
> + work_led1 {
> + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
> + label = "system_work_led1";
> + retain-state-suspended;
> + };
> +
> + work_led2 {
> + gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
> + label = "system_work_led2";
> + retain-state-suspended;
> + };
> +
> + work_led3 {
> + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
> + label = "system_work_led3";
> + retain-state-suspended;
> + };
> + };
> +};
> +
> +&cpu_l0 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l1 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l2 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l3 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_b0 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&cpu_b1 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&emmc_phy {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> + i2c-scl-rising-time-ns = <180>;
> + i2c-scl-falling-time-ns = <30>;
> + clock-frequency = <400000>;
> +
> + rk809: pmic@20 {
> + compatible = "rockchip,rk809";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default", "pmic-sleep",
> + "pmic-power-off", "pmic-reset";
Does these pinctrl configs useful other than default?
> + pinctrl-0 = <&pmic_int_l>;
> + pinctrl-1 = <&soc_slppin_slp>, <&rk809_slppin_slp>;
> + pinctrl-2 = <&soc_slppin_gpio>, <&rk809_slppin_pwrdn>;
> + pinctrl-3 = <&soc_slppin_gpio>,<&rk809_slppin_null>;
> + rockchip,system-power-controller;
> + pmic-reset-func = <1>;
> + wakeup-source;
> + #clock-cells = <1>;
> + clock-output-names = "rk808-clkout1", "rk808-clkout2";
> +
> + vcc1-supply = <&vcc5v0_sys>;
> + vcc2-supply = <&vcc5v0_sys>;
> + vcc3-supply = <&vcc5v0_sys>;
> + vcc4-supply = <&vcc5v0_sys>;
> + vcc5-supply = <&vcc_buck5>;
> + vcc6-supply = <&vcc_buck5>;
> + vcc7-supply = <&vcc3v3_sys>;
> + vcc8-supply = <&vcc3v3_sys>;
> + vcc9-supply = <&vcc5v0_sys>;
> +
> + pwrkey {
> + status = "okay";
No compatible needed?
> + };
> +
> + rtc {
> + status = "okay";
No compatible needed?
> + };
> +
> + pinctrl_rk8xx: pinctrl_rk8xx {
Mainline MFD driver has no pinctrl support for RK809.
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + rk809_slppin_null: rk809_slppin_null {
> + pins = "gpio_slp";
> + function = "pin_fun0";
> + };
> +
> + rk809_slppin_slp: rk809_slppin_slp {
> + pins = "gpio_slp";
> + function = "pin_fun1";
> + };
> +
> + rk809_slppin_pwrdn: rk809_slppin_pwrdn {
> + pins = "gpio_slp";
> + function = "pin_fun2";
> + };
> +
> + rk809_slppin_rst: rk809_slppin_rst {
> + pins = "gpio_slp";
> + function = "pin_fun3";
> + };
> + };
> +
> + regulators {
> + vdd_center: DCDC_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-initial-mode = <0x2>;
> + regulator-name = "vdd_center";
Please match the regulator names with schematic.
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <900000>;
> + };
> + };
> +
> + vdd_cpu_l: DCDC_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-ramp-delay = <6001>;
> + regulator-initial-mode = <0x2>;
> + regulator-name = "vdd_cpu_l";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_ddr";
> + regulator-initial-mode = <0x2>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc3v3_sys: DCDC_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-initial-mode = <0x2>;
> + regulator-name = "vcc3v3_sys";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc_buck5: DCDC_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <2200000>;
> + regulator-max-microvolt = <2200000>;
> + regulator-name = "vcc_buck5";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <2200000>;
> + };
> + };
> +
> + vcca_0v9: LDO_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + regulator-name = "vcca_0v9";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v8: LDO_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-name = "vcc_1v8";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc0v9_soc: LDO_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> +
> + regulator-name = "vcc0v9_soc";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <900000>;
> + };
> + };
> +
> + vcca_1v8: LDO_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-name = "vcca_1v8";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd1v5_dvp: LDO_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> +
> + regulator-name = "vdd1v5_dvp";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v5: LDO_REG6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> +
> + regulator-name = "vcc_1v5";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_3v0: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> +
> + regulator-name = "vcc_3v0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vccio_sd: LDO_REG8 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-name = "vccio_sd";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc_sd: LDO_REG9 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-name = "vcc_sd";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc5v0_usb: SWITCH_REG1 {
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> +
> + regulator-name = "vcc5v0_usb";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vccio_3v3: SWITCH_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-name = "vccio_3v3";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> + };
> + };
> +
> + vdd_cpu_b: regulator@1c {
> + compatible = "fcs,fan53555";
> + reg = <0x1c>;
> + vin-supply = <&vcc5v0_sys>;
> + pinctrl-0 = <&vsel1_gpio>;
> + vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
> + regulator-name = "vdd_cpu_b";
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1500000>;
> + regulator-ramp-delay = <2300>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-initial-state = <3>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_gpu: regulator@10 {
> + compatible = "fcs,fan53555";
> + status = "okay";
> + reg = <0x10>;
> + vin-supply = <&vcc5v0_sys>;
> + pinctrl-0 = <&vsel2_gpio>;
> + vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
> + regulator-name = "vdd_gpu";
> + regulator-min-microvolt = <735000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-ramp-delay = <2300>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +};
> +
> +&i2c8 {
> + status = "okay";
> + i2c-scl-rising-time-ns = <345>;
> + i2c-scl-falling-time-ns = <11>;
> + clock-frequency = <100000>;
> +};
> +
> +&io_domains {
> + status = "okay";
> + bt656-supply = <&vcca_1v8>; /* APIO2_VDD */
> + audio-supply = <&vcca_1v8>; /* APIO5_VDD */
> + sdmmc-supply = <&vccio_sd>; /* SDMMC0_VDD */
> + gpio1830-supply = <&vcc_1v8>; /* APIO4_VDD */
> +};
> +
> +&pinctrl {
> + pinctrl-names = "default";
> + pinctrl-0 = <&npu_ref_clk>;
> +
> + leds {
> + work_led1: work_led1 {
> + rockchip,pins =
> + <2 5 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + work_led2: work_led2 {
> + rockchip,pins =
> + <2 4 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + work_led3: work_led3 {
> + rockchip,pins =
> + <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + npu_clk {
> + npu_ref_clk: npu-ref-clk {
> + rockchip,pins =
> + <0 RK_PA2 1 &pcfg_pull_none>;
> + };
> + };
> +
> + pmic {
> + pmic_int_l: pmic-int-l {
> + rockchip,pins =
> + <1 RK_PC2 0 &pcfg_pull_up>;
> + };
> +
> + soc_slppin_gpio: soc-slppin-gpio {
> + rockchip,pins =
> + <1 RK_PA5 0 &pcfg_output_low>;
> + };
> +
> + soc_slppin_slp: soc-slppin-slp {
> + rockchip,pins =
> + <1 RK_PA5 1 &pcfg_pull_down>;
> + };
> +
> + vsel1_gpio: vsel1-gpio {
> + rockchip,pins =
> + <1 RK_PC1 0 &pcfg_pull_down>;
> + };
> +
> + vsel2_gpio: vsel2-gpio {
> + rockchip,pins =
> + <1 RK_PB6 0 &pcfg_pull_down>;
> + };
> + };
> +
> + usb3 {
> + usb3_host_en: usb3-host-en {
> + rockchip,pins =
> + <2 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
> + };
> + };
> +};
> +
> +&pmu_io_domains {
> + status = "okay";
> + pmu1830-supply = <&vcc_1v8>;
> +};
> +
> +&pwm0 {
> + status = "okay";
> +};
> +
> +&pwm2 {
> + status = "okay";
> +};
> +
> +&saradc {
> + status = "okay";
> + vref-supply = <&vcc_1v8>;
> +};
> +
> +&sdhci {
> + bus-width = <8>;
> + mmc-hs400-1_8v;
> + non-removable;
> + keep-power-in-suspend;
> + mmc-hs400-enhanced-strobe;
> + status = "okay";
> +};
> +
> +&tcphy1 {
No tcphy0? I can see this used in schematics.
> + status = "okay";
> +};
> +
> +&tsadc {
> + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
> + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
> + status = "okay";
> +};
> +
> +&u2phy1 {
No u2phy0?
> + status = "okay";
> +
> + u2phy1_otg: otg-port {
> + status = "okay";
> + };
> +
> + u2phy1_host: host-port {
> + phy-supply = <&vcc5v0_usb>;
> + status = "okay";
> + };
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_xfer &uart0_cts>;
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&uart4 {
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_host1_ehci {
> + status = "okay";
> +};
> +
> +&usb_host0_ohci {
> + status = "okay";
> +};
> +
> +&usb_host1_ohci {
> + status = "okay";
> +};
> +
> +&usbdrd3_1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb3_host_en>;
> +};
> +
> +&usbdrd_dwc3_0 {
No usbdrd3_0?
Thanks,
Mani
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_1 {
> + snps,dis-u3-autosuspend-quirk;
> + status = "okay";
> +};
> +
> --
> 2.17.1
>
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2 1/1] arm64: dts: rockchip: Add support for TB-96AI board
2019-08-05 11:28 ` Manivannan Sadhasivam
@ 2019-08-20 2:35 ` Elon Zhang
0 siblings, 0 replies; 4+ messages in thread
From: Elon Zhang @ 2019-08-20 2:35 UTC (permalink / raw)
To: Manivannan Sadhasivam
Cc: heiko, mark.rutland, robh+dt, linux-rockchip, linux-arm-kernel,
linux-kernel, devicetree
Hi Mani,
Thanks for your review. Please see comments inline.
在 8/5/2019 19:28, Manivannan Sadhasivam 写道:
> Hi Elon,
>
> Thanks for the v2. Still the DT needs to be cleaned up a bit. I have tested this
> patch on TB96-AI SOM/Carrier board and found that the USB ports are not working
> at all! Do we need to change any switch settings?
Yes. The USB ports can not work. I have already added all USB related
setting. I tried
rockchip internel rk3399.dtsi and the USB ports can work, so I think the
cause is SoC related
setting difference in mainline kernel.
I can not figure it out for now, should I remove the usb related node in
this patch?
>
> Comments are inline.
>
> On Mon, Aug 05, 2019 at 09:57:55AM +0800, Elon Zhang wrote:
>> Add devicetree support for RK3399Pro TB-96AI board, one of
>> the 96Boards family.
>>
>> The TB-96AI board is a 96Boards Compute SOM design, launched
>> by Linaro, Rockchip and Beiqicloud.
>>
>> More information can be obtained from the following websites:
>> 1.https://www.96boards.org/product/tb-96ai/
>> 2.http://t.rock-chips.com/
>> 3.http://www.beiqicloud.com/
>>
>> This patch add basic node for the board and support booting up
>> to Fedora.
>>
>> Signed-off-by: Elon Zhang <zhangzj@rock-chips.com>
>> ---
>> changes since v1:
>> - remove needless node
>> - using a standard LED formats for 96Boards
>>
>> arch/arm64/boot/dts/rockchip/Makefile | 1 +
>> .../boot/dts/rockchip/rk3399pro-tb-96ai.dts | 560 ++++++++++++++++++
>> 2 files changed, 561 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
>> index 5f2687acbf94..3d6c8d4363b5 100644
>> --- a/arch/arm64/boot/dts/rockchip/Makefile
>> +++ b/arch/arm64/boot/dts/rockchip/Makefile
>> @@ -27,3 +27,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
>> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-tb-96ai.dtb
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
>> new file mode 100644
>> index 000000000000..767b37b854ba
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
>> @@ -0,0 +1,560 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
>> + */
>> +
>> +/dts-v1/;
>> +#include "rk3399pro.dtsi"
>> +#include "rk3399-opp.dtsi"
>> +
>> +/ {
>> + compatible = "beiqi,rk3399pro-tb-96ai", "rockchip,rk3399pro";
>> +
>> + chosen {
>> + stdout-path = "serial2:1500000n8";
>> + };
>> +
>> + xin32k: xin32k {
>> + compatible = "fixed-clock";
>> + clock-frequency = <32768>;
>> + clock-output-names = "xin32k";
>> + #clock-cells = <0>;
>> + };
>> +
>> + vcc5v0_sys: vccsys {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc5v0_sys";
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + };
>> +
>> + leds {
> Still the LEDs are not defined as per the format I shared before...
I am not very sure what the format exactly is. Is the LEDs format below
right?
49 leds {
50 compatible = "gpio-leds";
51 pinctrl-names = "default";
52 pinctrl-0 = <&user_led1>,<&user_led2>,<&user_led3>;
53
54 user_led1 {
55 label = "green:user1";
56 gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
57 retain-state-suspended;
58 };
59
60 user_led2 {
61 label = "green:user2";
62 gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
63 retain-state-suspended;
64 };
65
66 user_led3 {
67 label = "green:user3";
68 gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
69 retain-state-suspended;
70 };
71 };
>
>> + compatible = "gpio-leds";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&work_led1>,<&work_led2>,<&work_led3>;
>> +
>> + work_led1 {
>> + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
>> + label = "system_work_led1";
>> + retain-state-suspended;
>> + };
>> +
>> + work_led2 {
>> + gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
>> + label = "system_work_led2";
>> + retain-state-suspended;
>> + };
>> +
>> + work_led3 {
>> + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
>> + label = "system_work_led3";
>> + retain-state-suspended;
>> + };
>> + };
>> +};
>> +
>> +&cpu_l0 {
>> + cpu-supply = <&vdd_cpu_l>;
>> +};
>> +
>> +&cpu_l1 {
>> + cpu-supply = <&vdd_cpu_l>;
>> +};
>> +
>> +&cpu_l2 {
>> + cpu-supply = <&vdd_cpu_l>;
>> +};
>> +
>> +&cpu_l3 {
>> + cpu-supply = <&vdd_cpu_l>;
>> +};
>> +
>> +&cpu_b0 {
>> + cpu-supply = <&vdd_cpu_b>;
>> +};
>> +
>> +&cpu_b1 {
>> + cpu-supply = <&vdd_cpu_b>;
>> +};
>> +
>> +&emmc_phy {
>> + status = "okay";
>> +};
>> +
>> +&i2c0 {
>> + status = "okay";
>> + i2c-scl-rising-time-ns = <180>;
>> + i2c-scl-falling-time-ns = <30>;
>> + clock-frequency = <400000>;
>> +
>> + rk809: pmic@20 {
>> + compatible = "rockchip,rk809";
>> + reg = <0x20>;
>> + interrupt-parent = <&gpio1>;
>> + interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
>> + pinctrl-names = "default", "pmic-sleep",
>> + "pmic-power-off", "pmic-reset";
> Does these pinctrl configs useful other than default?
These pinctrl configs are used for sleep/wake. Since mainline MFD and
pinctrl driver
has no pinctrl support for RK809, these pinctrl configs will be removed
other than default.
>
>> + pinctrl-0 = <&pmic_int_l>;
>> + pinctrl-1 = <&soc_slppin_slp>, <&rk809_slppin_slp>;
>> + pinctrl-2 = <&soc_slppin_gpio>, <&rk809_slppin_pwrdn>;
>> + pinctrl-3 = <&soc_slppin_gpio>,<&rk809_slppin_null>;
>> + rockchip,system-power-controller;
>> + pmic-reset-func = <1>;
>> + wakeup-source;
>> + #clock-cells = <1>;
>> + clock-output-names = "rk808-clkout1", "rk808-clkout2";
>> +
>> + vcc1-supply = <&vcc5v0_sys>;
>> + vcc2-supply = <&vcc5v0_sys>;
>> + vcc3-supply = <&vcc5v0_sys>;
>> + vcc4-supply = <&vcc5v0_sys>;
>> + vcc5-supply = <&vcc_buck5>;
>> + vcc6-supply = <&vcc_buck5>;
>> + vcc7-supply = <&vcc3v3_sys>;
>> + vcc8-supply = <&vcc3v3_sys>;
>> + vcc9-supply = <&vcc5v0_sys>;
>> +
>> + pwrkey {
>> + status = "okay";
> No compatible needed?
No compatible needed. It is RK809 internel implement.
>
>> + };
>> +
>> + rtc {
>> + status = "okay";
> No compatible needed?
ditto.
>
>> + };
>> +
>> + pinctrl_rk8xx: pinctrl_rk8xx {
> Mainline MFD driver has no pinctrl support for RK809.
Yes. This node will be removed.
Thank,
Elon
>
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + rk809_slppin_null: rk809_slppin_null {
>> + pins = "gpio_slp";
>> + function = "pin_fun0";
>> + };
>> +
>> + rk809_slppin_slp: rk809_slppin_slp {
>> + pins = "gpio_slp";
>> + function = "pin_fun1";
>> + };
>> +
>> + rk809_slppin_pwrdn: rk809_slppin_pwrdn {
>> + pins = "gpio_slp";
>> + function = "pin_fun2";
>> + };
>> +
>> + rk809_slppin_rst: rk809_slppin_rst {
>> + pins = "gpio_slp";
>> + function = "pin_fun3";
>> + };
>> + };
>> +
>> + regulators {
>> + vdd_center: DCDC_REG1 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <750000>;
>> + regulator-max-microvolt = <1350000>;
>> + regulator-initial-mode = <0x2>;
>> + regulator-name = "vdd_center";
> Please match the regulator names with schematic.
>
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <900000>;
>> + };
>> + };
>> +
>> + vdd_cpu_l: DCDC_REG2 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <750000>;
>> + regulator-max-microvolt = <1350000>;
>> + regulator-ramp-delay = <6001>;
>> + regulator-initial-mode = <0x2>;
>> + regulator-name = "vdd_cpu_l";
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vcc_ddr: DCDC_REG3 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-name = "vcc_ddr";
>> + regulator-initial-mode = <0x2>;
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + };
>> + };
>> +
>> + vcc3v3_sys: DCDC_REG4 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-initial-mode = <0x2>;
>> + regulator-name = "vcc3v3_sys";
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <3300000>;
>> + };
>> + };
>> +
>> + vcc_buck5: DCDC_REG5 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <2200000>;
>> + regulator-max-microvolt = <2200000>;
>> + regulator-name = "vcc_buck5";
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <2200000>;
>> + };
>> + };
>> +
>> + vcca_0v9: LDO_REG1 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <900000>;
>> + regulator-name = "vcca_0v9";
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vcc_1v8: LDO_REG2 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> +
>> + regulator-name = "vcc_1v8";
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <1800000>;
>> + };
>> + };
>> +
>> + vcc0v9_soc: LDO_REG3 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <900000>;
>> +
>> + regulator-name = "vcc0v9_soc";
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <900000>;
>> + };
>> + };
>> +
>> + vcca_1v8: LDO_REG4 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> +
>> + regulator-name = "vcca_1v8";
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vdd1v5_dvp: LDO_REG5 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1500000>;
>> + regulator-max-microvolt = <1500000>;
>> +
>> + regulator-name = "vdd1v5_dvp";
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vcc_1v5: LDO_REG6 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1500000>;
>> + regulator-max-microvolt = <1500000>;
>> +
>> + regulator-name = "vcc_1v5";
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vcc_3v0: LDO_REG7 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3000000>;
>> +
>> + regulator-name = "vcc_3v0";
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vccio_sd: LDO_REG8 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <3300000>;
>> +
>> + regulator-name = "vccio_sd";
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <3300000>;
>> + };
>> + };
>> +
>> + vcc_sd: LDO_REG9 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> +
>> + regulator-name = "vcc_sd";
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <3300000>;
>> + };
>> + };
>> +
>> + vcc5v0_usb: SWITCH_REG1 {
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> +
>> + regulator-name = "vcc5v0_usb";
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vccio_3v3: SWITCH_REG2 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> +
>> + regulator-name = "vccio_3v3";
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> + };
>> + };
>> +
>> + vdd_cpu_b: regulator@1c {
>> + compatible = "fcs,fan53555";
>> + reg = <0x1c>;
>> + vin-supply = <&vcc5v0_sys>;
>> + pinctrl-0 = <&vsel1_gpio>;
>> + vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
>> + regulator-name = "vdd_cpu_b";
>> + regulator-min-microvolt = <712500>;
>> + regulator-max-microvolt = <1500000>;
>> + regulator-ramp-delay = <2300>;
>> + fcs,suspend-voltage-selector = <1>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-initial-state = <3>;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vdd_gpu: regulator@10 {
>> + compatible = "fcs,fan53555";
>> + status = "okay";
>> + reg = <0x10>;
>> + vin-supply = <&vcc5v0_sys>;
>> + pinctrl-0 = <&vsel2_gpio>;
>> + vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
>> + regulator-name = "vdd_gpu";
>> + regulator-min-microvolt = <735000>;
>> + regulator-max-microvolt = <1400000>;
>> + regulator-ramp-delay = <2300>;
>> + fcs,suspend-voltage-selector = <1>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +};
>> +
>> +&i2c8 {
>> + status = "okay";
>> + i2c-scl-rising-time-ns = <345>;
>> + i2c-scl-falling-time-ns = <11>;
>> + clock-frequency = <100000>;
>> +};
>> +
>> +&io_domains {
>> + status = "okay";
>> + bt656-supply = <&vcca_1v8>; /* APIO2_VDD */
>> + audio-supply = <&vcca_1v8>; /* APIO5_VDD */
>> + sdmmc-supply = <&vccio_sd>; /* SDMMC0_VDD */
>> + gpio1830-supply = <&vcc_1v8>; /* APIO4_VDD */
>> +};
>> +
>> +&pinctrl {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&npu_ref_clk>;
>> +
>> + leds {
>> + work_led1: work_led1 {
>> + rockchip,pins =
>> + <2 5 RK_FUNC_GPIO &pcfg_pull_none>;
>> + };
>> +
>> + work_led2: work_led2 {
>> + rockchip,pins =
>> + <2 4 RK_FUNC_GPIO &pcfg_pull_none>;
>> + };
>> +
>> + work_led3: work_led3 {
>> + rockchip,pins =
>> + <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
>> + };
>> + };
>> +
>> + npu_clk {
>> + npu_ref_clk: npu-ref-clk {
>> + rockchip,pins =
>> + <0 RK_PA2 1 &pcfg_pull_none>;
>> + };
>> + };
>> +
>> + pmic {
>> + pmic_int_l: pmic-int-l {
>> + rockchip,pins =
>> + <1 RK_PC2 0 &pcfg_pull_up>;
>> + };
>> +
>> + soc_slppin_gpio: soc-slppin-gpio {
>> + rockchip,pins =
>> + <1 RK_PA5 0 &pcfg_output_low>;
>> + };
>> +
>> + soc_slppin_slp: soc-slppin-slp {
>> + rockchip,pins =
>> + <1 RK_PA5 1 &pcfg_pull_down>;
>> + };
>> +
>> + vsel1_gpio: vsel1-gpio {
>> + rockchip,pins =
>> + <1 RK_PC1 0 &pcfg_pull_down>;
>> + };
>> +
>> + vsel2_gpio: vsel2-gpio {
>> + rockchip,pins =
>> + <1 RK_PB6 0 &pcfg_pull_down>;
>> + };
>> + };
>> +
>> + usb3 {
>> + usb3_host_en: usb3-host-en {
>> + rockchip,pins =
>> + <2 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
>> + };
>> + };
>> +};
>> +
>> +&pmu_io_domains {
>> + status = "okay";
>> + pmu1830-supply = <&vcc_1v8>;
>> +};
>> +
>> +&pwm0 {
>> + status = "okay";
>> +};
>> +
>> +&pwm2 {
>> + status = "okay";
>> +};
>> +
>> +&saradc {
>> + status = "okay";
>> + vref-supply = <&vcc_1v8>;
>> +};
>> +
>> +&sdhci {
>> + bus-width = <8>;
>> + mmc-hs400-1_8v;
>> + non-removable;
>> + keep-power-in-suspend;
>> + mmc-hs400-enhanced-strobe;
>> + status = "okay";
>> +};
>> +
>> +&tcphy1 {
> No tcphy0? I can see this used in schematics.
>
>> + status = "okay";
>> +};
>> +
>> +&tsadc {
>> + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
>> + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
>> + status = "okay";
>> +};
>> +
>> +&u2phy1 {
> No u2phy0?
>
>> + status = "okay";
>> +
>> + u2phy1_otg: otg-port {
>> + status = "okay";
>> + };
>> +
>> + u2phy1_host: host-port {
>> + phy-supply = <&vcc5v0_usb>;
>> + status = "okay";
>> + };
>> +};
>> +
>> +&uart0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&uart0_xfer &uart0_cts>;
>> + status = "okay";
>> +};
>> +
>> +&uart2 {
>> + status = "okay";
>> +};
>> +
>> +&uart4 {
>> + status = "okay";
>> +};
>> +
>> +&usb_host0_ehci {
>> + status = "okay";
>> +};
>> +
>> +&usb_host1_ehci {
>> + status = "okay";
>> +};
>> +
>> +&usb_host0_ohci {
>> + status = "okay";
>> +};
>> +
>> +&usb_host1_ohci {
>> + status = "okay";
>> +};
>> +
>> +&usbdrd3_1 {
>> + status = "okay";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&usb3_host_en>;
>> +};
>> +
>> +&usbdrd_dwc3_0 {
> No usbdrd3_0?
>
> Thanks,
> Mani
>
>> + status = "okay";
>> +};
>> +
>> +&usbdrd_dwc3_1 {
>> + snps,dis-u3-autosuspend-quirk;
>> + status = "okay";
>> +};
>> +
>> --
>> 2.17.1
>>
>>
>>
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2 1/1] arm64: dts: rockchip: Add support for TB-96AI board
2019-08-05 1:57 [PATCH v2 1/1] arm64: dts: rockchip: Add support for TB-96AI board Elon Zhang
2019-08-05 11:28 ` Manivannan Sadhasivam
@ 2019-09-01 4:36 ` Heiko Stuebner
1 sibling, 0 replies; 4+ messages in thread
From: Heiko Stuebner @ 2019-09-01 4:36 UTC (permalink / raw)
To: Elon Zhang
Cc: mark.rutland, robh+dt, manivannan.sadhasivam, linux-rockchip,
linux-arm-kernel, linux-kernel, devicetree
Hi Elon,
Am Montag, 5. August 2019, 03:57:55 CEST schrieb Elon Zhang:
> Add devicetree support for RK3399Pro TB-96AI board, one of
> the 96Boards family.
>
> The TB-96AI board is a 96Boards Compute SOM design, launched
> by Linaro, Rockchip and Beiqicloud.
>
> More information can be obtained from the following websites:
> 1.https://www.96boards.org/product/tb-96ai/
> 2.http://t.rock-chips.com/
> 3.http://www.beiqicloud.com/
>
> This patch add basic node for the board and support booting up
> to Fedora.
>
> Signed-off-by: Elon Zhang <zhangzj@rock-chips.com>
> ---
> changes since v1:
> - remove needless node
> - using a standard LED formats for 96Boards
>
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> .../boot/dts/rockchip/rk3399pro-tb-96ai.dts | 560 ++++++++++++++++++
> 2 files changed, 561 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
>
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 5f2687acbf94..3d6c8d4363b5 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -27,3 +27,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-tb-96ai.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
> new file mode 100644
> index 000000000000..767b37b854ba
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
> @@ -0,0 +1,560 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
> + */
> +
> +/dts-v1/;
> +#include "rk3399pro.dtsi"
> +#include "rk3399-opp.dtsi"
> +
> +/ {
> + compatible = "beiqi,rk3399pro-tb-96ai", "rockchip,rk3399pro";
> +
> + chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + xin32k: xin32k {
> + compatible = "fixed-clock";
> + clock-frequency = <32768>;
> + clock-output-names = "xin32k";
> + #clock-cells = <0>;
> + };
I would guess this 32kHz clock does originate from the rk809 below?
If so please simply adjust the clock-output-names in it, so that
it sources correctly.
> +
> + vcc5v0_sys: vccsys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + };
Please always try to construct a full regulator tree.
(see debugfs/regulator/regulator_summary)
Part of me doesn't want to believe that vcc5v0_sys is
the root regulator getting the outside power supply ;-) .
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&work_led1>,<&work_led2>,<&work_led3>;
> +
> + work_led1 {
> + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
> + label = "system_work_led1";
> + retain-state-suspended;
> + };
> +
> + work_led2 {
> + gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
> + label = "system_work_led2";
> + retain-state-suspended;
> + };
> +
> + work_led3 {
> + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
> + label = "system_work_led3";
> + retain-state-suspended;
> + };
> + };
> +};
> +
> +&cpu_l0 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l1 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l2 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l3 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_b0 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&cpu_b1 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&emmc_phy {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> + i2c-scl-rising-time-ns = <180>;
> + i2c-scl-falling-time-ns = <30>;
> + clock-frequency = <400000>;
> +
> + rk809: pmic@20 {
> + compatible = "rockchip,rk809";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default", "pmic-sleep",
> + "pmic-power-off", "pmic-reset";
> + pinctrl-0 = <&pmic_int_l>;
> + pinctrl-1 = <&soc_slppin_slp>, <&rk809_slppin_slp>;
> + pinctrl-2 = <&soc_slppin_gpio>, <&rk809_slppin_pwrdn>;
> + pinctrl-3 = <&soc_slppin_gpio>,<&rk809_slppin_null>;
> + rockchip,system-power-controller;
> + pmic-reset-func = <1>;
That is not part of the binding I think
> + wakeup-source;
> + #clock-cells = <1>;
> + clock-output-names = "rk808-clkout1", "rk808-clkout2";
> +
> + vcc1-supply = <&vcc5v0_sys>;
> + vcc2-supply = <&vcc5v0_sys>;
> + vcc3-supply = <&vcc5v0_sys>;
> + vcc4-supply = <&vcc5v0_sys>;
> + vcc5-supply = <&vcc_buck5>;
> + vcc6-supply = <&vcc_buck5>;
> + vcc7-supply = <&vcc3v3_sys>;
> + vcc8-supply = <&vcc3v3_sys>;
> + vcc9-supply = <&vcc5v0_sys>;
> +
> + pwrkey {
> + status = "okay";
> + };
> +
> + rtc {
> + status = "okay";
> + };
There is no binding for either pwrkey nor rtc subnodes and
I think the rtc device is just created in any case, so you should just
drop these nodes.
> + pinctrl_rk8xx: pinctrl_rk8xx {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + rk809_slppin_null: rk809_slppin_null {
> + pins = "gpio_slp";
> + function = "pin_fun0";
> + };
> +
> + rk809_slppin_slp: rk809_slppin_slp {
> + pins = "gpio_slp";
> + function = "pin_fun1";
> + };
> +
> + rk809_slppin_pwrdn: rk809_slppin_pwrdn {
> + pins = "gpio_slp";
> + function = "pin_fun2";
> + };
> +
> + rk809_slppin_rst: rk809_slppin_rst {
> + pins = "gpio_slp";
> + function = "pin_fun3";
> + };
> + };
There is a binding for rk805 pinctrl, but it looks way different than this.
Please adapt and if necessary submit binding+code for rk809 first.
See Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
for reference.
> + regulators {
> + vdd_center: DCDC_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-initial-mode = <0x2>;
> + regulator-name = "vdd_center";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <900000>;
> + };
> + };
> +
> + vdd_cpu_l: DCDC_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-ramp-delay = <6001>;
> + regulator-initial-mode = <0x2>;
> + regulator-name = "vdd_cpu_l";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_ddr";
> + regulator-initial-mode = <0x2>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc3v3_sys: DCDC_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-initial-mode = <0x2>;
> + regulator-name = "vcc3v3_sys";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc_buck5: DCDC_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <2200000>;
> + regulator-max-microvolt = <2200000>;
> + regulator-name = "vcc_buck5";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <2200000>;
> + };
> + };
> +
> + vcca_0v9: LDO_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + regulator-name = "vcca_0v9";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v8: LDO_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-name = "vcc_1v8";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc0v9_soc: LDO_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> +
> + regulator-name = "vcc0v9_soc";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <900000>;
> + };
> + };
> +
> + vcca_1v8: LDO_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-name = "vcca_1v8";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd1v5_dvp: LDO_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> +
> + regulator-name = "vdd1v5_dvp";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v5: LDO_REG6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> +
> + regulator-name = "vcc_1v5";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_3v0: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> +
> + regulator-name = "vcc_3v0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vccio_sd: LDO_REG8 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-name = "vccio_sd";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc_sd: LDO_REG9 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-name = "vcc_sd";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc5v0_usb: SWITCH_REG1 {
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> +
> + regulator-name = "vcc5v0_usb";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vccio_3v3: SWITCH_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-name = "vccio_3v3";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> + };
> + };
> +
> + vdd_cpu_b: regulator@1c {
> + compatible = "fcs,fan53555";
> + reg = <0x1c>;
> + vin-supply = <&vcc5v0_sys>;
> + pinctrl-0 = <&vsel1_gpio>;
> + vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
I don't think there is a vsel-gpios propety specified yet and the
fan53555 driver cannot handle that pin yet.
You could change that ;-)
> + regulator-name = "vdd_cpu_b";
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1500000>;
> + regulator-ramp-delay = <2300>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-initial-state = <3>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_gpu: regulator@10 {
> + compatible = "fcs,fan53555";
> + status = "okay";
> + reg = <0x10>;
> + vin-supply = <&vcc5v0_sys>;
> + pinctrl-0 = <&vsel2_gpio>;
> + vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
> + regulator-name = "vdd_gpu";
> + regulator-min-microvolt = <735000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-ramp-delay = <2300>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +};
> +
> +&i2c8 {
> + status = "okay";
> + i2c-scl-rising-time-ns = <345>;
> + i2c-scl-falling-time-ns = <11>;
> + clock-frequency = <100000>;
> +};
> +
> +&io_domains {
> + status = "okay";
> + bt656-supply = <&vcca_1v8>; /* APIO2_VDD */
> + audio-supply = <&vcca_1v8>; /* APIO5_VDD */
> + sdmmc-supply = <&vccio_sd>; /* SDMMC0_VDD */
> + gpio1830-supply = <&vcc_1v8>; /* APIO4_VDD */
> +};
> +
> +&pinctrl {
> + pinctrl-names = "default";
> + pinctrl-0 = <&npu_ref_clk>;
> +
> + leds {
> + work_led1: work_led1 {
> + rockchip,pins =
> + <2 5 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + work_led2: work_led2 {
> + rockchip,pins =
> + <2 4 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + work_led3: work_led3 {
> + rockchip,pins =
> + <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + npu_clk {
> + npu_ref_clk: npu-ref-clk {
> + rockchip,pins =
> + <0 RK_PA2 1 &pcfg_pull_none>;
> + };
> + };
> +
> + pmic {
> + pmic_int_l: pmic-int-l {
> + rockchip,pins =
> + <1 RK_PC2 0 &pcfg_pull_up>;
> + };
> +
> + soc_slppin_gpio: soc-slppin-gpio {
> + rockchip,pins =
> + <1 RK_PA5 0 &pcfg_output_low>;
> + };
> +
> + soc_slppin_slp: soc-slppin-slp {
> + rockchip,pins =
> + <1 RK_PA5 1 &pcfg_pull_down>;
> + };
> +
> + vsel1_gpio: vsel1-gpio {
> + rockchip,pins =
> + <1 RK_PC1 0 &pcfg_pull_down>;
> + };
> +
> + vsel2_gpio: vsel2-gpio {
> + rockchip,pins =
> + <1 RK_PB6 0 &pcfg_pull_down>;
> + };
> + };
> +
> + usb3 {
> + usb3_host_en: usb3-host-en {
> + rockchip,pins =
> + <2 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
> + };
> + };
> +};
> +
> +&pmu_io_domains {
> + status = "okay";
> + pmu1830-supply = <&vcc_1v8>;
> +};
> +
> +&pwm0 {
> + status = "okay";
> +};
> +
> +&pwm2 {
> + status = "okay";
> +};
> +
> +&saradc {
> + status = "okay";
> + vref-supply = <&vcc_1v8>;
> +};
> +
> +&sdhci {
> + bus-width = <8>;
> + mmc-hs400-1_8v;
> + non-removable;
> + keep-power-in-suspend;
> + mmc-hs400-enhanced-strobe;
> + status = "okay";
> +};
> +
> +&tcphy1 {
> + status = "okay";
> +};
> +
> +&tsadc {
> + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
> + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
> + status = "okay";
> +};
> +
> +&u2phy1 {
> + status = "okay";
> +
> + u2phy1_otg: otg-port {
> + status = "okay";
> + };
> +
> + u2phy1_host: host-port {
> + phy-supply = <&vcc5v0_usb>;
> + status = "okay";
> + };
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_xfer &uart0_cts>;
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&uart4 {
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_host1_ehci {
> + status = "okay";
> +};
> +
> +&usb_host0_ohci {
> + status = "okay";
> +};
> +
> +&usb_host1_ohci {
> + status = "okay";
> +};
> +
> +&usbdrd3_1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb3_host_en>;
> +};
> +
> +&usbdrd_dwc3_0 {
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_1 {
> + snps,dis-u3-autosuspend-quirk;
This property is neither part of the dwc3 driver,
nor the dwc3 devicetree binding.
> + status = "okay";
> +};
> +
>
Heiko
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-09-01 4:37 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-05 1:57 [PATCH v2 1/1] arm64: dts: rockchip: Add support for TB-96AI board Elon Zhang
2019-08-05 11:28 ` Manivannan Sadhasivam
2019-08-20 2:35 ` Elon Zhang
2019-09-01 4:36 ` Heiko Stuebner
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).