[PATCH AUTOSEL 4.19 01/32] clk: at91: generated: Truncate divisor to GENERATED_MAX_DIV + 1

[PATCH AUTOSEL 4.19 01/32] clk: at91: generated: Truncate divisor to GENERATED_MAX_DIV + 1

[Sasha Levin]

From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>

[ Upstream commit 1573eebeaa8055777eb753f9b4d1cbe653380c38 ]

In clk_generated_determine_rate(), if the divisor is greater than
GENERATED_MAX_DIV + 1, then the wrong best_rate will be returned.
If clk_generated_set_rate() will be called later with this wrong
rate, it will return -EINVAL, so the generated clock won't change
its value. Do no let the divisor be greater than GENERATED_MAX_DIV + 1.

Fixes: 8c7aa6328947 ("clk: at91: clk-generated: remove useless divisor loop")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/at91/clk-generated.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
index 33481368740e7..113152425a95d 100644
--- a/drivers/clk/at91/clk-generated.c
+++ b/drivers/clk/at91/clk-generated.c
@@ -153,6 +153,8 @@ static int clk_generated_determine_rate(struct clk_hw *hw,
 			continue;
 
 		div = DIV_ROUND_CLOSEST(parent_rate, req->rate);
+		if (div > GENERATED_MAX_DIV + 1)
+			div = GENERATED_MAX_DIV + 1;
 
 		clk_generated_best_diff(req, parent, parent_rate, div,
 					&best_diff, &best_rate);
-- 
2.20.1

[PATCH AUTOSEL 4.19 02/32] clk: sprd: Select REGMAP_MMIO to avoid compile errors

[Sasha Levin]

From: Chunyan Zhang <chunyan.zhang@unisoc.com>

[ Upstream commit c9a67cbb5189e966c70451562b2ca4c3876ab546 ]

Make REGMAP_MMIO selected to avoid undefined reference to regmap symbols.

Fixes: d41f59fd92f2 ("clk: sprd: Add common infrastructure")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/sprd/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/sprd/Kconfig b/drivers/clk/sprd/Kconfig
index 87892471eb96c..bad8099832d48 100644
--- a/drivers/clk/sprd/Kconfig
+++ b/drivers/clk/sprd/Kconfig
@@ -2,6 +2,7 @@ config SPRD_COMMON_CLK
 	tristate "Clock support for Spreadtrum SoCs"
 	depends on ARCH_SPRD || COMPILE_TEST
 	default ARCH_SPRD
+	select REGMAP_MMIO
 
 if SPRD_COMMON_CLK
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 03/32] clk: renesas: cpg-mssr: Fix reset control race condition

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit e1f1ae8002e4b06addc52443fcd975bbf554ae92 ]

The module reset code in the Renesas CPG/MSSR driver uses
read-modify-write (RMW) operations to write to a Software Reset Register
(SRCRn), and simple writes to write to a Software Reset Clearing
Register (SRSTCLRn), as was mandated by the R-Car Gen2 and Gen3 Hardware
User's Manuals.

However, this may cause a race condition when two devices are reset in
parallel: if the reset for device A completes in the middle of the RMW
operation for device B, device A may be reset again, causing subtle
failures (e.g. i2c timeouts):

	thread A			thread B
	--------			--------

	val = SRCRn
	val |= bit A
	SRCRn = val

	delay

					val = SRCRn (bit A is set)

	SRSTCLRn = bit A
	(bit A in SRCRn is cleared)

					val |= bit B
					SRCRn = val (bit A and B are set)

This can be reproduced on e.g. Salvator-XS using:

    $ while true; do i2cdump -f -y 4 0x6A b > /dev/null; done &
    $ while true; do i2cdump -f -y 2 0x10 b > /dev/null; done &

    i2c-rcar e6510000.i2c: error -110 : 40000002
    i2c-rcar e66d8000.i2c: error -110 : 40000002

According to the R-Car Gen3 Hardware Manual Errata for Rev.
0.80 of Feb 28, 2018, reflected in Rev. 1.00 of the R-Car Gen3 Hardware
User's Manual, writes to SRCRn do not require read-modify-write cycles.

Note that the R-Car Gen2 Hardware User's Manual has not been updated
yet, and still says a read-modify-write sequence is required.  According
to the hardware team, the reset hardware block is the same on both R-Car
Gen2 and Gen3, though.

Hence fix the issue by replacing the read-modify-write operations on
SRCRn by simple writes.

Reported-by: Yao Lihua <Lihua.Yao@desay-svautomotive.com>
Fixes: 6197aa65c4905532 ("clk: renesas: cpg-mssr: Add support for reset control")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Linh Phung <linh.phung.jy@renesas.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/renesas/renesas-cpg-mssr.c | 16 ++--------------
 1 file changed, 2 insertions(+), 14 deletions(-)

diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c
index f4b013e9352d9..24485bee9b49e 100644
--- a/drivers/clk/renesas/renesas-cpg-mssr.c
+++ b/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -535,17 +535,11 @@ static int cpg_mssr_reset(struct reset_controller_dev *rcdev,
 	unsigned int reg = id / 32;
 	unsigned int bit = id % 32;
 	u32 bitmask = BIT(bit);
-	unsigned long flags;
-	u32 value;
 
 	dev_dbg(priv->dev, "reset %u%02u\n", reg, bit);
 
 	/* Reset module */
-	spin_lock_irqsave(&priv->rmw_lock, flags);
-	value = readl(priv->base + SRCR(reg));
-	value |= bitmask;
-	writel(value, priv->base + SRCR(reg));
-	spin_unlock_irqrestore(&priv->rmw_lock, flags);
+	writel(bitmask, priv->base + SRCR(reg));
 
 	/* Wait for at least one cycle of the RCLK clock (@ ca. 32 kHz) */
 	udelay(35);
@@ -562,16 +556,10 @@ static int cpg_mssr_assert(struct reset_controller_dev *rcdev, unsigned long id)
 	unsigned int reg = id / 32;
 	unsigned int bit = id % 32;
 	u32 bitmask = BIT(bit);
-	unsigned long flags;
-	u32 value;
 
 	dev_dbg(priv->dev, "assert %u%02u\n", reg, bit);
 
-	spin_lock_irqsave(&priv->rmw_lock, flags);
-	value = readl(priv->base + SRCR(reg));
-	value |= bitmask;
-	writel(value, priv->base + SRCR(reg));
-	spin_unlock_irqrestore(&priv->rmw_lock, flags);
+	writel(bitmask, priv->base + SRCR(reg));
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 04/32] xtensa: fix build for cores with coprocessors

[Sasha Levin]

From: Max Filippov <jcmvbkbc@gmail.com>

[ Upstream commit e3cacb73e626d885b8cf24103fed0ae26518e3c4 ]

Assembly entry/return abstraction change didn't add asmmacro.h include
statement to coprocessor.S, resulting in references to undefined macros
abi_entry and abi_ret on cores that define XTENSA_HAVE_COPROCESSORS.
Fix that by including asm/asmmacro.h from the coprocessor.S.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/kernel/coprocessor.S | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/xtensa/kernel/coprocessor.S b/arch/xtensa/kernel/coprocessor.S
index 4f8b52d575a24..6454c0a95cccb 100644
--- a/arch/xtensa/kernel/coprocessor.S
+++ b/arch/xtensa/kernel/coprocessor.S
@@ -14,6 +14,7 @@
 
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
+#include <asm/asmmacro.h>
 #include <asm/processor.h>
 #include <asm/coprocessor.h>
 #include <asm/thread_info.h>
-- 
2.20.1

[PATCH AUTOSEL 4.19 05/32] xen/pciback: remove set but not used variable 'old_state'

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 09e088a4903bd0dd911b4f1732b250130cdaffed ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/xen/xen-pciback/conf_space_capability.c: In function pm_ctrl_write:
drivers/xen/xen-pciback/conf_space_capability.c:119:25: warning:
 variable old_state set but not used [-Wunused-but-set-variable]

It is never used so can be removed.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/xen-pciback/conf_space_capability.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/xen/xen-pciback/conf_space_capability.c b/drivers/xen/xen-pciback/conf_space_capability.c
index 73427d8e01161..e5694133ebe57 100644
--- a/drivers/xen/xen-pciback/conf_space_capability.c
+++ b/drivers/xen/xen-pciback/conf_space_capability.c
@@ -116,13 +116,12 @@ static int pm_ctrl_write(struct pci_dev *dev, int offset, u16 new_value,
 {
 	int err;
 	u16 old_value;
-	pci_power_t new_state, old_state;
+	pci_power_t new_state;
 
 	err = pci_read_config_word(dev, offset, &old_value);
 	if (err)
 		goto out;
 
-	old_state = (pci_power_t)(old_value & PCI_PM_CTRL_STATE_MASK);
 	new_state = (pci_power_t)(new_value & PCI_PM_CTRL_STATE_MASK);
 
 	new_value &= PM_OK_BITS;
-- 
2.20.1

[PATCH AUTOSEL 4.19 06/32] irqchip/gic-v3-its: Free unused vpt_page when alloc vpe table fail

[Sasha Levin]

From: Nianyao Tang <tangnianyao@huawei.com>

[ Upstream commit 34f8eb92ca053cbba2887bb7e4dbf2b2cd6eb733 ]

In its_vpe_init, when its_alloc_vpe_table fails, we should free
vpt_page allocated just before, instead of vpe->vpt_page.
Let's fix it.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index ee30e8965d1be..9ba73e11757d9 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -2883,7 +2883,7 @@ static int its_vpe_init(struct its_vpe *vpe)
 
 	if (!its_alloc_vpe_table(vpe_id)) {
 		its_vpe_id_free(vpe_id);
-		its_free_pending_table(vpe->vpt_page);
+		its_free_pending_table(vpt_page);
 		return -ENOMEM;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 07/32] irqchip/irq-imx-gpcv2: Forward irq type to parent

[Sasha Levin]

From: Lucas Stach <l.stach@pengutronix.de>

[ Upstream commit 9a446ef08f3bfc0c3deb9c6be840af2528ef8cf8 ]

The GPCv2 is a stacked IRQ controller below the ARM GIC. It doesn't
care about the IRQ type itself, but needs to forward the type to the
parent IRQ controller, so this one can be configured correctly.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-imx-gpcv2.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/irqchip/irq-imx-gpcv2.c b/drivers/irqchip/irq-imx-gpcv2.c
index 4760307ab43fc..cef8f5e2e8fce 100644
--- a/drivers/irqchip/irq-imx-gpcv2.c
+++ b/drivers/irqchip/irq-imx-gpcv2.c
@@ -131,6 +131,7 @@ static struct irq_chip gpcv2_irqchip_data_chip = {
 	.irq_unmask		= imx_gpcv2_irq_unmask,
 	.irq_set_wake		= imx_gpcv2_irq_set_wake,
 	.irq_retrigger		= irq_chip_retrigger_hierarchy,
+	.irq_set_type		= irq_chip_set_type_parent,
 #ifdef CONFIG_SMP
 	.irq_set_affinity	= irq_chip_set_affinity_parent,
 #endif
-- 
2.20.1

[PATCH AUTOSEL 4.19 08/32] perf header: Fix divide by zero error if f_header.attr_size==0

[Sasha Levin]

From: Vince Weaver <vincent.weaver@maine.edu>

[ Upstream commit 7622236ceb167aa3857395f9bdaf871442aa467e ]

So I have been having lots of trouble with hand-crafted perf.data files
causing segfaults and the like, so I have started fuzzing the perf tool.

First issue found:

If f_header.attr_size is 0 in the perf.data file, then perf will crash
with a divide-by-zero error.

Committer note:

Added a pr_err() to tell the user why the command failed.

Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1907231100440.14532@macbook-air
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/header.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index 7f2e3b1c746c9..94278f914cdca 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -3285,6 +3285,13 @@ int perf_session__read_header(struct perf_session *session)
 			   data->file.path);
 	}
 
+	if (f_header.attr_size == 0) {
+		pr_err("ERROR: The %s file's attr size field is 0 which is unexpected.\n"
+		       "Was the 'perf record' command properly terminated?\n",
+		       data->file.path);
+		return -EINVAL;
+	}
+
 	nr_attrs = f_header.attrs.size / f_header.attr_size;
 	lseek(fd, f_header.attrs.offset, SEEK_SET);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 09/32] perf header: Fix use of unitialized value warning

[Sasha Levin]

From: Numfor Mbiziwo-Tiapo <nums@google.com>

[ Upstream commit 20f9781f491360e7459c589705a2e4b1f136bee9 ]

When building our local version of perf with MSAN (Memory Sanitizer) and
running the perf record command, MSAN throws a use of uninitialized
value warning in "tools/perf/util/util.c:333:6".

This warning stems from the "buf" variable being passed into "write".
It originated as the variable "ev" with the type union perf_event*
defined in the "perf_event__synthesize_attr" function in
"tools/perf/util/header.c".

In the "perf_event__synthesize_attr" function they allocate space with a malloc
call using ev, then go on to only assign some of the member variables before
passing "ev" on as a parameter to the "process" function therefore "ev"
contains uninitialized memory. Changing the malloc call to zalloc to initialize
all the members of "ev" which gets rid of the warning.

To reproduce this warning, build perf by running:
make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-fsanitize=memory\
 -fsanitize-memory-track-origins"

(Additionally, llvm might have to be installed and clang might have to
be specified as the compiler - export CC=/usr/bin/clang)

then running:
tools/perf/perf record -o - ls / | tools/perf/perf --no-pager annotate\
 -i - --stdio

Please see the cover letter for why false positive warnings may be
generated.

Signed-off-by: Numfor Mbiziwo-Tiapo <nums@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Drayton <mbd@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190724234500.253358-2-nums@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/header.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index 94278f914cdca..3a1a1fe8fea3c 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -3372,7 +3372,7 @@ int perf_event__synthesize_attr(struct perf_tool *tool,
 	size += sizeof(struct perf_event_header);
 	size += ids * sizeof(u64);
 
-	ev = malloc(size);
+	ev = zalloc(size);
 
 	if (ev == NULL)
 		return -ENOMEM;
-- 
2.20.1

[PATCH AUTOSEL 4.19 10/32] libata: zpodd: Fix small read overflow in zpodd_get_mech_type()

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 71d6c505b4d9e6f76586350450e785e3d452b346 ]

Jeffrin reported a KASAN issue:

  BUG: KASAN: global-out-of-bounds in ata_exec_internal_sg+0x50f/0xc70
  Read of size 16 at addr ffffffff91f41f80 by task scsi_eh_1/149
  ...
  The buggy address belongs to the variable:
    cdb.48319+0x0/0x40

Much like commit 18c9a99bce2a ("libata: zpodd: small read overflow in
eject_tray()"), this fixes a cdb[] buffer length, this time in
zpodd_get_mech_type():

We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be
ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes.

Reported-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Fixes: afe759511808c ("libata: identify and init ZPODD devices")
Link: https://lore.kernel.org/lkml/201907181423.E808958@keescook/
Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/libata-zpodd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c
index 173e6f2dd9af0..eefda51f97d35 100644
--- a/drivers/ata/libata-zpodd.c
+++ b/drivers/ata/libata-zpodd.c
@@ -56,7 +56,7 @@ static enum odd_mech_type zpodd_get_mech_type(struct ata_device *dev)
 	unsigned int ret;
 	struct rm_feature_desc *desc;
 	struct ata_taskfile tf;
-	static const char cdb[] = {  GPCMD_GET_CONFIGURATION,
+	static const char cdb[ATAPI_CDB_LEN] = {  GPCMD_GET_CONFIGURATION,
 			2,      /* only 1 feature descriptor requested */
 			0, 3,   /* 3, removable medium feature */
 			0, 0, 0,/* reserved */
-- 
2.20.1

[PATCH AUTOSEL 4.19 11/32] drm/bridge: lvds-encoder: Fix build error while CONFIG_DRM_KMS_HELPER=m

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit f4cc743a98136df3c3763050a0e8223b52d9a960 ]

If DRM_LVDS_ENCODER=y but CONFIG_DRM_KMS_HELPER=m,
build fails:

drivers/gpu/drm/bridge/lvds-encoder.o: In function `lvds_encoder_probe':
lvds-encoder.c:(.text+0x155): undefined reference to `devm_drm_panel_bridge_add'

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: dbb58bfd9ae6 ("drm/bridge: Fix lvds-encoder since the panel_bridge rework.")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729071216.27488-1-yuehaibing@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index bf6cad6c9178b..7a3e5a8f6439b 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -46,6 +46,7 @@ config DRM_DUMB_VGA_DAC
 config DRM_LVDS_ENCODER
 	tristate "Transparent parallel to LVDS encoder support"
 	depends on OF
+	select DRM_KMS_HELPER
 	select DRM_PANEL_BRIDGE
 	help
 	  Support for transparent parallel to LVDS encoders that don't require
-- 
2.20.1

[PATCH AUTOSEL 4.19 12/32] Btrfs: fix deadlock between fiemap and transaction commits

[Sasha Levin]

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit a6d155d2e363f26290ffd50591169cb96c2a609e ]

The fiemap handler locks a file range that can have unflushed delalloc,
and after locking the range, it tries to attach to a running transaction.
If the running transaction started its commit, that is, it is in state
TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the
flushoncommit option or the transaction is creating a snapshot for the
subvolume that contains the file that fiemap is operating on, we end up
deadlocking. This happens because fiemap is blocked on the transaction,
waiting for it to complete, and the transaction is waiting for the flushed
dealloc to complete, which requires locking the file range that the fiemap
task already locked. The following stack traces serve as an example of
when this deadlock happens:

  (...)
  [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs]
  [404571.515956] Call Trace:
  [404571.516360]  ? __schedule+0x3ae/0x7b0
  [404571.516730]  schedule+0x3a/0xb0
  [404571.517104]  lock_extent_bits+0x1ec/0x2a0 [btrfs]
  [404571.517465]  ? remove_wait_queue+0x60/0x60
  [404571.517832]  btrfs_finish_ordered_io+0x292/0x800 [btrfs]
  [404571.518202]  normal_work_helper+0xea/0x530 [btrfs]
  [404571.518566]  process_one_work+0x21e/0x5c0
  [404571.518990]  worker_thread+0x4f/0x3b0
  [404571.519413]  ? process_one_work+0x5c0/0x5c0
  [404571.519829]  kthread+0x103/0x140
  [404571.520191]  ? kthread_create_worker_on_cpu+0x70/0x70
  [404571.520565]  ret_from_fork+0x3a/0x50
  [404571.520915] kworker/u8:6    D    0 31651      2 0x80004000
  [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs]
  (...)
  [404571.537000] fsstress        D    0 13117  13115 0x00004000
  [404571.537263] Call Trace:
  [404571.537524]  ? __schedule+0x3ae/0x7b0
  [404571.537788]  schedule+0x3a/0xb0
  [404571.538066]  wait_current_trans+0xc8/0x100 [btrfs]
  [404571.538349]  ? remove_wait_queue+0x60/0x60
  [404571.538680]  start_transaction+0x33c/0x500 [btrfs]
  [404571.539076]  btrfs_check_shared+0xa3/0x1f0 [btrfs]
  [404571.539513]  ? extent_fiemap+0x2ce/0x650 [btrfs]
  [404571.539866]  extent_fiemap+0x2ce/0x650 [btrfs]
  [404571.540170]  do_vfs_ioctl+0x526/0x6f0
  [404571.540436]  ksys_ioctl+0x70/0x80
  [404571.540734]  __x64_sys_ioctl+0x16/0x20
  [404571.540997]  do_syscall_64+0x60/0x1d0
  [404571.541279]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  (...)
  [404571.543729] btrfs           D    0 14210  14208 0x00004000
  [404571.544023] Call Trace:
  [404571.544275]  ? __schedule+0x3ae/0x7b0
  [404571.544526]  ? wait_for_completion+0x112/0x1a0
  [404571.544795]  schedule+0x3a/0xb0
  [404571.545064]  schedule_timeout+0x1ff/0x390
  [404571.545351]  ? lock_acquire+0xa6/0x190
  [404571.545638]  ? wait_for_completion+0x49/0x1a0
  [404571.545890]  ? wait_for_completion+0x112/0x1a0
  [404571.546228]  wait_for_completion+0x131/0x1a0
  [404571.546503]  ? wake_up_q+0x70/0x70
  [404571.546775]  btrfs_wait_ordered_extents+0x27c/0x400 [btrfs]
  [404571.547159]  btrfs_commit_transaction+0x3b0/0xae0 [btrfs]
  [404571.547449]  ? btrfs_mksubvol+0x4a4/0x640 [btrfs]
  [404571.547703]  ? remove_wait_queue+0x60/0x60
  [404571.547969]  btrfs_mksubvol+0x605/0x640 [btrfs]
  [404571.548226]  ? __sb_start_write+0xd4/0x1c0
  [404571.548512]  ? mnt_want_write_file+0x24/0x50
  [404571.548789]  btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs]
  [404571.549048]  btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs]
  [404571.549307]  btrfs_ioctl+0x133f/0x3150 [btrfs]
  [404571.549549]  ? mem_cgroup_charge_statistics+0x4c/0xd0
  [404571.549792]  ? mem_cgroup_commit_charge+0x84/0x4b0
  [404571.550064]  ? __handle_mm_fault+0xe3e/0x11f0
  [404571.550306]  ? do_raw_spin_unlock+0x49/0xc0
  [404571.550608]  ? _raw_spin_unlock+0x24/0x30
  [404571.550976]  ? __handle_mm_fault+0xedf/0x11f0
  [404571.551319]  ? do_vfs_ioctl+0xa2/0x6f0
  [404571.551659]  ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
  [404571.552087]  do_vfs_ioctl+0xa2/0x6f0
  [404571.552355]  ksys_ioctl+0x70/0x80
  [404571.552621]  __x64_sys_ioctl+0x16/0x20
  [404571.552864]  do_syscall_64+0x60/0x1d0
  [404571.553104]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  (...)

If we were joining the transaction instead of attaching to it, we would
not risk a deadlock because a join only blocks if the transaction is in a
state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc
flush performed by a transaction is done before it reaches that state,
when it is in the state TRANS_STATE_COMMIT_START. However a transaction
join is intended for use cases where we do modify the filesystem, and
fiemap only needs to peek at delayed references from the current
transaction in order to determine if extents are shared, and, besides
that, when there is no current transaction or when it blocks to wait for
a current committing transaction to complete, it creates a new transaction
without reserving any space. Such unnecessary transactions, besides doing
unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary
rotation of the precious backup roots.

So fix this by adding a new transaction join variant, named join_nostart,
which behaves like the regular join, but it does not create a transaction
when none currently exists or after waiting for a committing transaction
to complete.

Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/backref.c     |  2 +-
 fs/btrfs/transaction.c | 22 ++++++++++++++++++----
 fs/btrfs/transaction.h |  3 +++
 3 files changed, 22 insertions(+), 5 deletions(-)

diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index ac6c383d63140..19855659f6503 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -1485,7 +1485,7 @@ int btrfs_check_shared(struct btrfs_root *root, u64 inum, u64 bytenr)
 		goto out;
 	}
 
-	trans = btrfs_attach_transaction(root);
+	trans = btrfs_join_transaction_nostart(root);
 	if (IS_ERR(trans)) {
 		if (PTR_ERR(trans) != -ENOENT && PTR_ERR(trans) != -EROFS) {
 			ret = PTR_ERR(trans);
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index bb8f6c020d227..a68e9130663fe 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -28,15 +28,18 @@ static const unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = {
 	[TRANS_STATE_COMMIT_START]	= (__TRANS_START | __TRANS_ATTACH),
 	[TRANS_STATE_COMMIT_DOING]	= (__TRANS_START |
 					   __TRANS_ATTACH |
-					   __TRANS_JOIN),
+					   __TRANS_JOIN |
+					   __TRANS_JOIN_NOSTART),
 	[TRANS_STATE_UNBLOCKED]		= (__TRANS_START |
 					   __TRANS_ATTACH |
 					   __TRANS_JOIN |
-					   __TRANS_JOIN_NOLOCK),
+					   __TRANS_JOIN_NOLOCK |
+					   __TRANS_JOIN_NOSTART),
 	[TRANS_STATE_COMPLETED]		= (__TRANS_START |
 					   __TRANS_ATTACH |
 					   __TRANS_JOIN |
-					   __TRANS_JOIN_NOLOCK),
+					   __TRANS_JOIN_NOLOCK |
+					   __TRANS_JOIN_NOSTART),
 };
 
 void btrfs_put_transaction(struct btrfs_transaction *transaction)
@@ -531,7 +534,8 @@ start_transaction(struct btrfs_root *root, unsigned int num_items,
 		ret = join_transaction(fs_info, type);
 		if (ret == -EBUSY) {
 			wait_current_trans(fs_info);
-			if (unlikely(type == TRANS_ATTACH))
+			if (unlikely(type == TRANS_ATTACH ||
+				     type == TRANS_JOIN_NOSTART))
 				ret = -ENOENT;
 		}
 	} while (ret == -EBUSY);
@@ -647,6 +651,16 @@ struct btrfs_trans_handle *btrfs_join_transaction_nolock(struct btrfs_root *root
 				 BTRFS_RESERVE_NO_FLUSH, true);
 }
 
+/*
+ * Similar to regular join but it never starts a transaction when none is
+ * running or after waiting for the current one to finish.
+ */
+struct btrfs_trans_handle *btrfs_join_transaction_nostart(struct btrfs_root *root)
+{
+	return start_transaction(root, 0, TRANS_JOIN_NOSTART,
+				 BTRFS_RESERVE_NO_FLUSH, true);
+}
+
 /*
  * btrfs_attach_transaction() - catch the running transaction
  *
diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h
index 4cbb1b55387dc..c1d34cc704722 100644
--- a/fs/btrfs/transaction.h
+++ b/fs/btrfs/transaction.h
@@ -97,11 +97,13 @@ struct btrfs_transaction {
 #define __TRANS_JOIN		(1U << 11)
 #define __TRANS_JOIN_NOLOCK	(1U << 12)
 #define __TRANS_DUMMY		(1U << 13)
+#define __TRANS_JOIN_NOSTART	(1U << 14)
 
 #define TRANS_START		(__TRANS_START | __TRANS_FREEZABLE)
 #define TRANS_ATTACH		(__TRANS_ATTACH)
 #define TRANS_JOIN		(__TRANS_JOIN | __TRANS_FREEZABLE)
 #define TRANS_JOIN_NOLOCK	(__TRANS_JOIN_NOLOCK)
+#define TRANS_JOIN_NOSTART	(__TRANS_JOIN_NOSTART)
 
 #define TRANS_EXTWRITERS	(__TRANS_START | __TRANS_ATTACH)
 
@@ -187,6 +189,7 @@ struct btrfs_trans_handle *btrfs_start_transaction_fallback_global_rsv(
 					int min_factor);
 struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root);
 struct btrfs_trans_handle *btrfs_join_transaction_nolock(struct btrfs_root *root);
+struct btrfs_trans_handle *btrfs_join_transaction_nostart(struct btrfs_root *root);
 struct btrfs_trans_handle *btrfs_attach_transaction(struct btrfs_root *root);
 struct btrfs_trans_handle *btrfs_attach_transaction_barrier(
 					struct btrfs_root *root);
-- 
2.20.1

[PATCH AUTOSEL 4.19 13/32] scsi: hpsa: correct scsi command status issue after reset

[Sasha Levin]

From: Don Brace <don.brace@microsemi.com>

[ Upstream commit eeebce1862970653cdf5c01e98bc669edd8f529a ]

Reviewed-by: Bader Ali - Saleh <bader.alisaleh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/hpsa.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index c43eccdea65d2..f570b8c5d857c 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -2320,6 +2320,8 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h,
 	case IOACCEL2_SERV_RESPONSE_COMPLETE:
 		switch (c2->error_data.status) {
 		case IOACCEL2_STATUS_SR_TASK_COMP_GOOD:
+			if (cmd)
+				cmd->result = 0;
 			break;
 		case IOACCEL2_STATUS_SR_TASK_COMP_CHK_COND:
 			cmd->result |= SAM_STAT_CHECK_CONDITION;
@@ -2479,8 +2481,10 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
 
 	/* check for good status */
 	if (likely(c2->error_data.serv_response == 0 &&
-			c2->error_data.status == 0))
+			c2->error_data.status == 0)) {
+		cmd->result = 0;
 		return hpsa_cmd_free_and_done(h, c, cmd);
+	}
 
 	/*
 	 * Any RAID offload error results in retry which will use
@@ -5617,6 +5621,12 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
 	}
 	c = cmd_tagged_alloc(h, cmd);
 
+	/*
+	 * This is necessary because the SML doesn't zero out this field during
+	 * error recovery.
+	 */
+	cmd->result = 0;
+
 	/*
 	 * Call alternate submit routine for I/O accelerated commands.
 	 * Retries always go down the normal I/O path.
-- 
2.20.1

[PATCH AUTOSEL 4.19 14/32] scsi: qla2xxx: Fix possible fcport null-pointer dereferences

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit e82f04ec6ba91065fd33a6201ffd7cab840e1475 ]

In qla2x00_alloc_fcport(), fcport is assigned to NULL in the error
handling code on line 4880:
    fcport = NULL;

Then fcport is used on lines 4883-4886:
    INIT_WORK(&fcport->del_work, qla24xx_delete_sess_fn);
	INIT_WORK(&fcport->reg_work, qla_register_fcport_fn);
	INIT_LIST_HEAD(&fcport->gnl_entry);
	INIT_LIST_HEAD(&fcport->list);

Thus, possible null-pointer dereferences may occur.

To fix these bugs, qla2x00_alloc_fcport() directly returns NULL
in the error handling code.

These bugs are found by a static analysis tool STCheck written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index f84f9bf150278..ddce32fe0513a 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -4732,7 +4732,7 @@ qla2x00_alloc_fcport(scsi_qla_host_t *vha, gfp_t flags)
 		ql_log(ql_log_warn, vha, 0xd049,
 		    "Failed to allocate ct_sns request.\n");
 		kfree(fcport);
-		fcport = NULL;
+		return NULL;
 	}
 	INIT_WORK(&fcport->del_work, qla24xx_delete_sess_fn);
 	INIT_LIST_HEAD(&fcport->gnl_entry);
-- 
2.20.1

[PATCH AUTOSEL 4.19 15/32] exit: make setting exit_state consistent

[Sasha Levin]

From: Christian Brauner <christian@brauner.io>

[ Upstream commit 30b692d3b390c6fe78a5064be0c4bbd44a41be59 ]

Since commit b191d6491be6 ("pidfd: fix a poll race when setting exit_state")
we unconditionally set exit_state to EXIT_ZOMBIE before calling into
do_notify_parent(). This was done to eliminate a race when querying
exit_state in do_notify_pidfd().
Back then we decided to do the absolute minimal thing to fix this and
not touch the rest of the exit_notify() function where exit_state is
set.
Since this fix has not caused any issues change the setting of
exit_state to EXIT_DEAD in the autoreap case to account for the fact hat
exit_state is set to EXIT_ZOMBIE unconditionally. This fix was planned
but also explicitly requested in [1] and makes the whole code more
consistent.

/* References */
[1]: https://lore.kernel.org/lkml/CAHk-=wigcxGFR2szue4wavJtH5cYTTeNES=toUBVGsmX0rzX+g@mail.gmail.com

Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/exit.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/kernel/exit.c b/kernel/exit.c
index 5c0964dc805ac..d9cfc39e5f97b 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -732,9 +732,10 @@ static void exit_notify(struct task_struct *tsk, int group_dead)
 		autoreap = true;
 	}
 
-	tsk->exit_state = autoreap ? EXIT_DEAD : EXIT_ZOMBIE;
-	if (tsk->exit_state == EXIT_DEAD)
+	if (autoreap) {
+		tsk->exit_state = EXIT_DEAD;
 		list_add(&tsk->ptrace_entry, &dead);
+	}
 
 	/* mt-exec, de_thread() is waiting for group leader */
 	if (unlikely(tsk->signal->notify_count < 0))
-- 
2.20.1

[PATCH AUTOSEL 4.19 16/32] drm/amdgpu: fix a potential information leaking bug

[Sasha Levin]

From: Wang Xiayang <xywang.sjtu@sjtu.edu.cn>

[ Upstream commit 929e571c04c285861e0bb049a396a2bdaea63282 ]

Coccinelle reports a path that the array "data" is never initialized.
The path skips the checks in the conditional branches when either
of callback functions, read_wave_vgprs and read_wave_sgprs, is not
registered. Later, the uninitialized "data" array is read
in the while-loop below and passed to put_user().

Fix the path by allocating the array with kcalloc().

The patch is simplier than adding a fall-back branch that explicitly
calls memset(data, 0, ...). Also it does not need the multiplication
1024*sizeof(*data) as the size parameter for memset() though there is
no risk of integer overflow.

Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c
index f5fb93795a69a..65cecfdd9b454 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c
@@ -707,7 +707,7 @@ static ssize_t amdgpu_debugfs_gpr_read(struct file *f, char __user *buf,
 	thread = (*pos & GENMASK_ULL(59, 52)) >> 52;
 	bank = (*pos & GENMASK_ULL(61, 60)) >> 60;
 
-	data = kmalloc_array(1024, sizeof(*data), GFP_KERNEL);
+	data = kcalloc(1024, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 17/32] ata: libahci: do not complain in case of deferred probe

[Sasha Levin]

From: Miquel Raynal <miquel.raynal@bootlin.com>

[ Upstream commit 090bb803708198e5ab6b0046398c7ed9f4d12d6b ]

Retrieving PHYs can defer the probe, do not spawn an error when
-EPROBE_DEFER is returned, it is normal behavior.

Fixes: b1a9edbda040 ("ata: libahci: allow to use multiple PHYs")
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/libahci_platform.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index c92c10d553746..5bece9752ed68 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -313,6 +313,9 @@ static int ahci_platform_get_phy(struct ahci_host_priv *hpriv, u32 port,
 		hpriv->phys[port] = NULL;
 		rc = 0;
 		break;
+	case -EPROBE_DEFER:
+		/* Do not complain yet */
+		break;
 
 	default:
 		dev_err(dev,
-- 
2.20.1

[PATCH AUTOSEL 4.19 18/32] kbuild: modpost: handle KBUILD_EXTRA_SYMBOLS only for external modules

[Sasha Levin]

From: Masahiro Yamada <yamada.masahiro@socionext.com>

[ Upstream commit cb4819934a7f9b87876f11ed05b8624c0114551b ]

KBUILD_EXTRA_SYMBOLS makes sense only when building external modules.
Moreover, the modpost sets 'external_module' if the -e option is given.

I replaced $(patsubst %, -e %,...) with simpler $(addprefix -e,...)
while I was here.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/Makefile.modpost | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index 7d4af0d0accb3..51884c7b80697 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -75,7 +75,7 @@ modpost = scripts/mod/modpost                    \
  $(if $(CONFIG_MODULE_SRCVERSION_ALL),-a,)       \
  $(if $(KBUILD_EXTMOD),-i,-o) $(kernelsymfile)   \
  $(if $(KBUILD_EXTMOD),-I $(modulesymfile))      \
- $(if $(KBUILD_EXTRA_SYMBOLS), $(patsubst %, -e %,$(KBUILD_EXTRA_SYMBOLS))) \
+ $(if $(KBUILD_EXTMOD),$(addprefix -e ,$(KBUILD_EXTRA_SYMBOLS))) \
  $(if $(KBUILD_EXTMOD),-o $(modulesymfile))      \
  $(if $(CONFIG_DEBUG_SECTION_MISMATCH),,-S)      \
  $(if $(CONFIG_SECTION_MISMATCH_WARN_ONLY),,-E)  \
-- 
2.20.1

[PATCH AUTOSEL 4.19 19/32] kbuild: Check for unknown options with cc-option usage in Kconfig and clang

[Sasha Levin]

From: Stephen Boyd <swboyd@chromium.org>

[ Upstream commit e8de12fb7cde2c85bc31097cd098da79a4818305 ]

If the particular version of clang a user has doesn't enable
-Werror=unknown-warning-option by default, even though it is the
default[1], then make sure to pass the option to the Kconfig cc-option
command so that testing options from Kconfig files works properly.
Otherwise, depending on the default values setup in the clang toolchain
we will silently assume options such as -Wmaybe-uninitialized are
supported by clang, when they really aren't.

A compilation issue only started happening for me once commit
589834b3a009 ("kbuild: Add -Werror=unknown-warning-option to
CLANG_FLAGS") was applied on top of commit b303c6df80c9 ("kbuild:
compute false-positive -Wmaybe-uninitialized cases in Kconfig"). This
leads kbuild to try and test for the existence of the
-Wmaybe-uninitialized flag with the cc-option command in
scripts/Kconfig.include, and it doesn't see an error returned from the
option test so it sets the config value to Y. Then the Makefile tries to
pass the unknown option on the command line and
-Werror=unknown-warning-option catches the invalid option and breaks the
build. Before commit 589834b3a009 ("kbuild: Add
-Werror=unknown-warning-option to CLANG_FLAGS") the build works fine,
but any cc-option test of a warning option in Kconfig files silently
evaluates to true, even if the warning option flag isn't supported on
clang.

Note: This doesn't change cc-option usages in Makefiles because those
use a different rule that includes KBUILD_CFLAGS by default (see the
__cc-option command in scripts/Kbuild.incluide). The KBUILD_CFLAGS
variable already has the -Werror=unknown-warning-option flag set. Thanks
to Doug for pointing out the different rule.

[1] https://clang.llvm.org/docs/DiagnosticsReference.html#wunknown-warning-option
Cc: Peter Smith <peter.smith@linaro.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/Kconfig.include | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/Kconfig.include b/scripts/Kconfig.include
index dad5583451afb..3b2861f47709b 100644
--- a/scripts/Kconfig.include
+++ b/scripts/Kconfig.include
@@ -20,7 +20,7 @@ success = $(if-success,$(1),y,n)
 
 # $(cc-option,<flag>)
 # Return y if the compiler supports <flag>, n otherwise
-cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null)
+cc-option = $(success,$(CC) -Werror $(CLANG_FLAGS) $(1) -E -x c /dev/null -o /dev/null)
 
 # $(ld-option,<flag>)
 # Return y if the linker supports <flag>, n otherwise
-- 
2.20.1

[PATCH AUTOSEL 4.19 20/32] arm64/efi: fix variable 'si' set but not used

[Sasha Levin]

From: Qian Cai <cai@lca.pw>

[ Upstream commit f1d4836201543e88ebe70237e67938168d5fab19 ]

GCC throws out this warning on arm64.

drivers/firmware/efi/libstub/arm-stub.c: In function 'efi_entry':
drivers/firmware/efi/libstub/arm-stub.c:132:22: warning: variable 'si'
set but not used [-Wunused-but-set-variable]

Fix it by making free_screen_info() a static inline function.

Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/efi.h | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h
index 7ed320895d1f4..f52a2968a3b69 100644
--- a/arch/arm64/include/asm/efi.h
+++ b/arch/arm64/include/asm/efi.h
@@ -94,7 +94,11 @@ static inline unsigned long efi_get_max_initrd_addr(unsigned long dram_base,
 	((protocol##_t *)instance)->f(instance, ##__VA_ARGS__)
 
 #define alloc_screen_info(x...)		&screen_info
-#define free_screen_info(x...)
+
+static inline void free_screen_info(efi_system_table_t *sys_table_arg,
+				    struct screen_info *si)
+{
+}
 
 /* redeclare as 'hidden' so the compiler will generate relative references */
 extern struct screen_info screen_info __attribute__((__visibility__("hidden")));
-- 
2.20.1

[PATCH AUTOSEL 4.19 21/32] drm/vgem: fix cache synchronization on arm/arm64

[Sasha Levin]

From: Rob Clark <robdclark@chromium.org>

[ Upstream commit 7e9e5ead55beacc11116b3fb90b0de6e7cf55a69 ]

drm_cflush_pages() is no-op on arm/arm64.  But instead we can use
dma_sync API.

Fixes failures w/ vgem_test.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717211542.30482-1-robdclark@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vgem/vgem_drv.c | 130 ++++++++++++++++++++------------
 1 file changed, 83 insertions(+), 47 deletions(-)

diff --git a/drivers/gpu/drm/vgem/vgem_drv.c b/drivers/gpu/drm/vgem/vgem_drv.c
index 4709f08f39e49..78c913f163851 100644
--- a/drivers/gpu/drm/vgem/vgem_drv.c
+++ b/drivers/gpu/drm/vgem/vgem_drv.c
@@ -47,10 +47,16 @@ static struct vgem_device {
 	struct platform_device *platform;
 } *vgem_device;
 
+static void sync_and_unpin(struct drm_vgem_gem_object *bo);
+static struct page **pin_and_sync(struct drm_vgem_gem_object *bo);
+
 static void vgem_gem_free_object(struct drm_gem_object *obj)
 {
 	struct drm_vgem_gem_object *vgem_obj = to_vgem_bo(obj);
 
+	if (!obj->import_attach)
+		sync_and_unpin(vgem_obj);
+
 	kvfree(vgem_obj->pages);
 	mutex_destroy(&vgem_obj->pages_lock);
 
@@ -78,40 +84,15 @@ static vm_fault_t vgem_gem_fault(struct vm_fault *vmf)
 		return VM_FAULT_SIGBUS;
 
 	mutex_lock(&obj->pages_lock);
+	if (!obj->pages)
+		pin_and_sync(obj);
 	if (obj->pages) {
 		get_page(obj->pages[page_offset]);
 		vmf->page = obj->pages[page_offset];
 		ret = 0;
 	}
 	mutex_unlock(&obj->pages_lock);
-	if (ret) {
-		struct page *page;
-
-		page = shmem_read_mapping_page(
-					file_inode(obj->base.filp)->i_mapping,
-					page_offset);
-		if (!IS_ERR(page)) {
-			vmf->page = page;
-			ret = 0;
-		} else switch (PTR_ERR(page)) {
-			case -ENOSPC:
-			case -ENOMEM:
-				ret = VM_FAULT_OOM;
-				break;
-			case -EBUSY:
-				ret = VM_FAULT_RETRY;
-				break;
-			case -EFAULT:
-			case -EINVAL:
-				ret = VM_FAULT_SIGBUS;
-				break;
-			default:
-				WARN_ON(PTR_ERR(page));
-				ret = VM_FAULT_SIGBUS;
-				break;
-		}
 
-	}
 	return ret;
 }
 
@@ -277,32 +258,93 @@ static const struct file_operations vgem_driver_fops = {
 	.release	= drm_release,
 };
 
-static struct page **vgem_pin_pages(struct drm_vgem_gem_object *bo)
+/* Called under pages_lock, except in free path (where it can't race): */
+static void sync_and_unpin(struct drm_vgem_gem_object *bo)
 {
-	mutex_lock(&bo->pages_lock);
-	if (bo->pages_pin_count++ == 0) {
-		struct page **pages;
+	struct drm_device *dev = bo->base.dev;
+
+	if (bo->table) {
+		dma_sync_sg_for_cpu(dev->dev, bo->table->sgl,
+				bo->table->nents, DMA_BIDIRECTIONAL);
+		sg_free_table(bo->table);
+		kfree(bo->table);
+		bo->table = NULL;
+	}
+
+	if (bo->pages) {
+		drm_gem_put_pages(&bo->base, bo->pages, true, true);
+		bo->pages = NULL;
+	}
+}
+
+static struct page **pin_and_sync(struct drm_vgem_gem_object *bo)
+{
+	struct drm_device *dev = bo->base.dev;
+	int npages = bo->base.size >> PAGE_SHIFT;
+	struct page **pages;
+	struct sg_table *sgt;
+
+	WARN_ON(!mutex_is_locked(&bo->pages_lock));
+
+	pages = drm_gem_get_pages(&bo->base);
+	if (IS_ERR(pages)) {
+		bo->pages_pin_count--;
+		mutex_unlock(&bo->pages_lock);
+		return pages;
+	}
 
-		pages = drm_gem_get_pages(&bo->base);
-		if (IS_ERR(pages)) {
-			bo->pages_pin_count--;
-			mutex_unlock(&bo->pages_lock);
-			return pages;
-		}
+	sgt = drm_prime_pages_to_sg(pages, npages);
+	if (IS_ERR(sgt)) {
+		dev_err(dev->dev,
+			"failed to allocate sgt: %ld\n",
+			PTR_ERR(bo->table));
+		drm_gem_put_pages(&bo->base, pages, false, false);
+		mutex_unlock(&bo->pages_lock);
+		return ERR_CAST(bo->table);
+	}
+
+	/*
+	 * Flush the object from the CPU cache so that importers
+	 * can rely on coherent indirect access via the exported
+	 * dma-address.
+	 */
+	dma_sync_sg_for_device(dev->dev, sgt->sgl,
+			sgt->nents, DMA_BIDIRECTIONAL);
+
+	bo->pages = pages;
+	bo->table = sgt;
+
+	return pages;
+}
+
+static struct page **vgem_pin_pages(struct drm_vgem_gem_object *bo)
+{
+	struct page **pages;
 
-		bo->pages = pages;
+	mutex_lock(&bo->pages_lock);
+	if (bo->pages_pin_count++ == 0 && !bo->pages) {
+		pages = pin_and_sync(bo);
+	} else {
+		WARN_ON(!bo->pages);
+		pages = bo->pages;
 	}
 	mutex_unlock(&bo->pages_lock);
 
-	return bo->pages;
+	return pages;
 }
 
 static void vgem_unpin_pages(struct drm_vgem_gem_object *bo)
 {
+	/*
+	 * We shouldn't hit this for imported bo's.. in the import
+	 * case we don't own the scatter-table
+	 */
+	WARN_ON(bo->base.import_attach);
+
 	mutex_lock(&bo->pages_lock);
 	if (--bo->pages_pin_count == 0) {
-		drm_gem_put_pages(&bo->base, bo->pages, true, true);
-		bo->pages = NULL;
+		WARN_ON(!bo->table);
+		sync_and_unpin(bo);
 	}
 	mutex_unlock(&bo->pages_lock);
 }
@@ -310,18 +352,12 @@ static void vgem_unpin_pages(struct drm_vgem_gem_object *bo)
 static int vgem_prime_pin(struct drm_gem_object *obj)
 {
 	struct drm_vgem_gem_object *bo = to_vgem_bo(obj);
-	long n_pages = obj->size >> PAGE_SHIFT;
 	struct page **pages;
 
 	pages = vgem_pin_pages(bo);
 	if (IS_ERR(pages))
 		return PTR_ERR(pages);
 
-	/* Flush the object from the CPU cache so that importers can rely
-	 * on coherent indirect access via the exported dma-address.
-	 */
-	drm_clflush_pages(pages, n_pages);
-
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 22/32] arm64: unwind: Prohibit probing on return_address()

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit ee07b93e7721ccd5d5b9fa6f0c10cb3fe2f1f4f9 ]

Prohibit probing on return_address() and subroutines which
is called from return_address(), since the it is invoked from
trace_hardirqs_off() which is also kprobe blacklisted.

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/return_address.c | 3 +++
 arch/arm64/kernel/stacktrace.c     | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/arch/arm64/kernel/return_address.c b/arch/arm64/kernel/return_address.c
index 933adbc0f654d..0311fe52c8ffb 100644
--- a/arch/arm64/kernel/return_address.c
+++ b/arch/arm64/kernel/return_address.c
@@ -11,6 +11,7 @@
 
 #include <linux/export.h>
 #include <linux/ftrace.h>
+#include <linux/kprobes.h>
 
 #include <asm/stack_pointer.h>
 #include <asm/stacktrace.h>
@@ -32,6 +33,7 @@ static int save_return_addr(struct stackframe *frame, void *d)
 		return 0;
 	}
 }
+NOKPROBE_SYMBOL(save_return_addr);
 
 void *return_address(unsigned int level)
 {
@@ -55,3 +57,4 @@ void *return_address(unsigned int level)
 		return NULL;
 }
 EXPORT_SYMBOL_GPL(return_address);
+NOKPROBE_SYMBOL(return_address);
diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c
index 4989f7ea1e599..bb482ec044b61 100644
--- a/arch/arm64/kernel/stacktrace.c
+++ b/arch/arm64/kernel/stacktrace.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/export.h>
 #include <linux/ftrace.h>
+#include <linux/kprobes.h>
 #include <linux/sched.h>
 #include <linux/sched/debug.h>
 #include <linux/sched/task_stack.h>
@@ -85,6 +86,7 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame)
 
 	return 0;
 }
+NOKPROBE_SYMBOL(unwind_frame);
 
 void notrace walk_stackframe(struct task_struct *tsk, struct stackframe *frame,
 		     int (*fn)(struct stackframe *, void *), void *data)
@@ -99,6 +101,7 @@ void notrace walk_stackframe(struct task_struct *tsk, struct stackframe *frame,
 			break;
 	}
 }
+NOKPROBE_SYMBOL(walk_stackframe);
 
 #ifdef CONFIG_STACKTRACE
 struct stack_trace_data {
-- 
2.20.1

[PATCH AUTOSEL 4.19 23/32] arm64/mm: fix variable 'pud' set but not used

[Sasha Levin]

From: Qian Cai <cai@lca.pw>

[ Upstream commit 7d4e2dcf311d3b98421d1f119efe5964cafa32fc ]

GCC throws a warning,

arch/arm64/mm/mmu.c: In function 'pud_free_pmd_page':
arch/arm64/mm/mmu.c:1033:8: warning: variable 'pud' set but not used
[-Wunused-but-set-variable]
  pud_t pud;
        ^~~

because pud_table() is a macro and compiled away. Fix it by making it a
static inline function and for pud_sect() as well.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/pgtable.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index ea423db393644..2214a403f39b9 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -419,8 +419,8 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 				 PMD_TYPE_SECT)
 
 #if defined(CONFIG_ARM64_64K_PAGES) || CONFIG_PGTABLE_LEVELS < 3
-#define pud_sect(pud)		(0)
-#define pud_table(pud)		(1)
+static inline bool pud_sect(pud_t pud) { return false; }
+static inline bool pud_table(pud_t pud) { return true; }
 #else
 #define pud_sect(pud)		((pud_val(pud) & PUD_TYPE_MASK) == \
 				 PUD_TYPE_SECT)
-- 
2.20.1

[PATCH AUTOSEL 4.19 24/32] IB/core: Add mitigation for Spectre V1

[Sasha Levin]

From: "Luck, Tony" <tony.luck@intel.com>

[ Upstream commit 61f259821dd3306e49b7d42a3f90fb5a4ff3351b ]

Some processors may mispredict an array bounds check and
speculatively access memory that they should not. With
a user supplied array index we like to play things safe
by masking the value with the array size before it is
used as an index.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20190731043957.GA1600@agluck-desk2.amr.corp.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/user_mad.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index c34a6852d691f..a18f3f8ad77fe 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -49,6 +49,7 @@
 #include <linux/sched.h>
 #include <linux/semaphore.h>
 #include <linux/slab.h>
+#include <linux/nospec.h>
 
 #include <linux/uaccess.h>
 
@@ -868,11 +869,14 @@ static int ib_umad_unreg_agent(struct ib_umad_file *file, u32 __user *arg)
 
 	if (get_user(id, arg))
 		return -EFAULT;
+	if (id >= IB_UMAD_MAX_AGENTS)
+		return -EINVAL;
 
 	mutex_lock(&file->port->file_mutex);
 	mutex_lock(&file->mutex);
 
-	if (id >= IB_UMAD_MAX_AGENTS || !__get_agent(file, id)) {
+	id = array_index_nospec(id, IB_UMAD_MAX_AGENTS);
+	if (!__get_agent(file, id)) {
 		ret = -EINVAL;
 		goto out;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 25/32] IB/mlx5: Fix MR registration flow to use UMR properly

[Sasha Levin]

From: Guy Levi <guyle@mellanox.com>

[ Upstream commit e5366d309a772fef264ec85e858f9ea46f939848 ]

Driver shouldn't allow to use UMR to register a MR when
umr_modify_atomic_disabled is set. Otherwise it will always end up with a
failure in the post send flow which sets the UMR WQE to modify atomic access
right.

Fixes: c8d75a980fab ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731081929.32559-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/mr.c | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)

diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c
index 7df4a4fe4af47..4ea8d04143ae5 100644
--- a/drivers/infiniband/hw/mlx5/mr.c
+++ b/drivers/infiniband/hw/mlx5/mr.c
@@ -51,22 +51,12 @@ static void clean_mr(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr);
 static void dereg_mr(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr);
 static int mr_cache_max_order(struct mlx5_ib_dev *dev);
 static int unreg_umr(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr);
-static bool umr_can_modify_entity_size(struct mlx5_ib_dev *dev)
-{
-	return !MLX5_CAP_GEN(dev->mdev, umr_modify_entity_size_disabled);
-}
 
 static bool umr_can_use_indirect_mkey(struct mlx5_ib_dev *dev)
 {
 	return !MLX5_CAP_GEN(dev->mdev, umr_indirect_mkey_disabled);
 }
 
-static bool use_umr(struct mlx5_ib_dev *dev, int order)
-{
-	return order <= mr_cache_max_order(dev) &&
-		umr_can_modify_entity_size(dev);
-}
-
 static int destroy_mkey(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr)
 {
 	int err = mlx5_core_destroy_mkey(dev->mdev, &mr->mmkey);
@@ -1302,7 +1292,7 @@ struct ib_mr *mlx5_ib_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
 {
 	struct mlx5_ib_dev *dev = to_mdev(pd->device);
 	struct mlx5_ib_mr *mr = NULL;
-	bool populate_mtts = false;
+	bool use_umr;
 	struct ib_umem *umem;
 	int page_shift;
 	int npages;
@@ -1335,29 +1325,30 @@ struct ib_mr *mlx5_ib_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
 	if (err < 0)
 		return ERR_PTR(err);
 
-	if (use_umr(dev, order)) {
+	use_umr = !MLX5_CAP_GEN(dev->mdev, umr_modify_entity_size_disabled) &&
+		  (!MLX5_CAP_GEN(dev->mdev, umr_modify_atomic_disabled) ||
+		   !MLX5_CAP_GEN(dev->mdev, atomic));
+
+	if (order <= mr_cache_max_order(dev) && use_umr) {
 		mr = alloc_mr_from_cache(pd, umem, virt_addr, length, ncont,
 					 page_shift, order, access_flags);
 		if (PTR_ERR(mr) == -EAGAIN) {
 			mlx5_ib_dbg(dev, "cache empty for order %d\n", order);
 			mr = NULL;
 		}
-		populate_mtts = false;
 	} else if (!MLX5_CAP_GEN(dev->mdev, umr_extended_translation_offset)) {
 		if (access_flags & IB_ACCESS_ON_DEMAND) {
 			err = -EINVAL;
 			pr_err("Got MR registration for ODP MR > 512MB, not supported for Connect-IB\n");
 			goto error;
 		}
-		populate_mtts = true;
+		use_umr = false;
 	}
 
 	if (!mr) {
-		if (!umr_can_modify_entity_size(dev))
-			populate_mtts = true;
 		mutex_lock(&dev->slow_path_mutex);
 		mr = reg_create(NULL, pd, virt_addr, length, umem, ncont,
-				page_shift, access_flags, populate_mtts);
+				page_shift, access_flags, !use_umr);
 		mutex_unlock(&dev->slow_path_mutex);
 	}
 
@@ -1375,7 +1366,7 @@ struct ib_mr *mlx5_ib_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
 	update_odp_mr(mr);
 #endif
 
-	if (!populate_mtts) {
+	if (use_umr) {
 		int update_xlt_flags = MLX5_IB_UPD_XLT_ENABLE;
 
 		if (access_flags & IB_ACCESS_ON_DEMAND)
-- 
2.20.1

[PATCH AUTOSEL 4.19 26/32] IB/mad: Fix use-after-free in ib mad completion handling

[Sasha Levin]

From: Jack Morgenstein <jackm@dev.mellanox.co.il>

[ Upstream commit 770b7d96cfff6a8bf6c9f261ba6f135dc9edf484 ]

We encountered a use-after-free bug when unloading the driver:

[ 3562.116059] BUG: KASAN: use-after-free in ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.117233] Read of size 4 at addr ffff8882ca5aa868 by task kworker/u13:2/23862
[ 3562.118385]
[ 3562.119519] CPU: 2 PID: 23862 Comm: kworker/u13:2 Tainted: G           OE     5.1.0-for-upstream-dbg-2019-05-19_16-44-30-13 #1
[ 3562.121806] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[ 3562.123075] Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
[ 3562.124383] Call Trace:
[ 3562.125640]  dump_stack+0x9a/0xeb
[ 3562.126911]  print_address_description+0xe3/0x2e0
[ 3562.128223]  ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.129545]  __kasan_report+0x15c/0x1df
[ 3562.130866]  ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.132174]  kasan_report+0xe/0x20
[ 3562.133514]  ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.134835]  ? find_mad_agent+0xa00/0xa00 [ib_core]
[ 3562.136158]  ? qlist_free_all+0x51/0xb0
[ 3562.137498]  ? mlx4_ib_sqp_comp_worker+0x1970/0x1970 [mlx4_ib]
[ 3562.138833]  ? quarantine_reduce+0x1fa/0x270
[ 3562.140171]  ? kasan_unpoison_shadow+0x30/0x40
[ 3562.141522]  ib_mad_recv_done+0xdf6/0x3000 [ib_core]
[ 3562.142880]  ? _raw_spin_unlock_irqrestore+0x46/0x70
[ 3562.144277]  ? ib_mad_send_done+0x1810/0x1810 [ib_core]
[ 3562.145649]  ? mlx4_ib_destroy_cq+0x2a0/0x2a0 [mlx4_ib]
[ 3562.147008]  ? _raw_spin_unlock_irqrestore+0x46/0x70
[ 3562.148380]  ? debug_object_deactivate+0x2b9/0x4a0
[ 3562.149814]  __ib_process_cq+0xe2/0x1d0 [ib_core]
[ 3562.151195]  ib_cq_poll_work+0x45/0xf0 [ib_core]
[ 3562.152577]  process_one_work+0x90c/0x1860
[ 3562.153959]  ? pwq_dec_nr_in_flight+0x320/0x320
[ 3562.155320]  worker_thread+0x87/0xbb0
[ 3562.156687]  ? __kthread_parkme+0xb6/0x180
[ 3562.158058]  ? process_one_work+0x1860/0x1860
[ 3562.159429]  kthread+0x320/0x3e0
[ 3562.161391]  ? kthread_park+0x120/0x120
[ 3562.162744]  ret_from_fork+0x24/0x30
...
[ 3562.187615] Freed by task 31682:
[ 3562.188602]  save_stack+0x19/0x80
[ 3562.189586]  __kasan_slab_free+0x11d/0x160
[ 3562.190571]  kfree+0xf5/0x2f0
[ 3562.191552]  ib_mad_port_close+0x200/0x380 [ib_core]
[ 3562.192538]  ib_mad_remove_device+0xf0/0x230 [ib_core]
[ 3562.193538]  remove_client_context+0xa6/0xe0 [ib_core]
[ 3562.194514]  disable_device+0x14e/0x260 [ib_core]
[ 3562.195488]  __ib_unregister_device+0x79/0x150 [ib_core]
[ 3562.196462]  ib_unregister_device+0x21/0x30 [ib_core]
[ 3562.197439]  mlx4_ib_remove+0x162/0x690 [mlx4_ib]
[ 3562.198408]  mlx4_remove_device+0x204/0x2c0 [mlx4_core]
[ 3562.199381]  mlx4_unregister_interface+0x49/0x1d0 [mlx4_core]
[ 3562.200356]  mlx4_ib_cleanup+0xc/0x1d [mlx4_ib]
[ 3562.201329]  __x64_sys_delete_module+0x2d2/0x400
[ 3562.202288]  do_syscall_64+0x95/0x470
[ 3562.203277]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

The problem was that the MAD PD was deallocated before the MAD CQ.
There was completion work pending for the CQ when the PD got deallocated.
When the mad completion handling reached procedure
ib_mad_post_receive_mads(), we got a use-after-free bug in the following
line of code in that procedure:
   sg_list.lkey = qp_info->port_priv->pd->local_dma_lkey;
(the pd pointer in the above line is no longer valid, because the
pd has been deallocated).

We fix this by allocating the PD before the CQ in procedure
ib_mad_port_open(), and deallocating the PD after freeing the CQ
in procedure ib_mad_port_close().

Since the CQ completion work queue is flushed during ib_free_cq(),
no completions will be pending for that CQ when the PD is later
deallocated.

Note that freeing the CQ before deallocating the PD is the practice
in the ULPs.

Fixes: 4be90bc60df4 ("IB/mad: Remove ib_get_dma_mr calls")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190801121449.24973-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/mad.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index ef459f2f2eeb8..7586c1dd73f19 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -3182,18 +3182,18 @@ static int ib_mad_port_open(struct ib_device *device,
 	if (has_smi)
 		cq_size *= 2;
 
+	port_priv->pd = ib_alloc_pd(device, 0);
+	if (IS_ERR(port_priv->pd)) {
+		dev_err(&device->dev, "Couldn't create ib_mad PD\n");
+		ret = PTR_ERR(port_priv->pd);
+		goto error3;
+	}
+
 	port_priv->cq = ib_alloc_cq(port_priv->device, port_priv, cq_size, 0,
 			IB_POLL_WORKQUEUE);
 	if (IS_ERR(port_priv->cq)) {
 		dev_err(&device->dev, "Couldn't create ib_mad CQ\n");
 		ret = PTR_ERR(port_priv->cq);
-		goto error3;
-	}
-
-	port_priv->pd = ib_alloc_pd(device, 0);
-	if (IS_ERR(port_priv->pd)) {
-		dev_err(&device->dev, "Couldn't create ib_mad PD\n");
-		ret = PTR_ERR(port_priv->pd);
 		goto error4;
 	}
 
@@ -3236,11 +3236,11 @@ static int ib_mad_port_open(struct ib_device *device,
 error7:
 	destroy_mad_qp(&port_priv->qp_info[0]);
 error6:
-	ib_dealloc_pd(port_priv->pd);
-error4:
 	ib_free_cq(port_priv->cq);
 	cleanup_recv_queue(&port_priv->qp_info[1]);
 	cleanup_recv_queue(&port_priv->qp_info[0]);
+error4:
+	ib_dealloc_pd(port_priv->pd);
 error3:
 	kfree(port_priv);
 
@@ -3270,8 +3270,8 @@ static int ib_mad_port_close(struct ib_device *device, int port_num)
 	destroy_workqueue(port_priv->wq);
 	destroy_mad_qp(&port_priv->qp_info[1]);
 	destroy_mad_qp(&port_priv->qp_info[0]);
-	ib_dealloc_pd(port_priv->pd);
 	ib_free_cq(port_priv->cq);
+	ib_dealloc_pd(port_priv->pd);
 	cleanup_recv_queue(&port_priv->qp_info[1]);
 	cleanup_recv_queue(&port_priv->qp_info[0]);
 	/* XXX: Handle deallocation of MAD registration tables */
-- 
2.20.1

[PATCH AUTOSEL 4.19 27/32] drm: msm: Fix add_gpu_components

[Sasha Levin]

From: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>

[ Upstream commit 9ca7ad6c7706edeae331c1632d0c63897418ebad ]

add_gpu_components() adds found GPU nodes from the DT to the match list,
regardless of the status of the nodes.  This is a problem, because if the
nodes are disabled, they should not be on the match list because they will
not be matched.  This prevents display from initing if a GPU node is
defined, but it's status is disabled.

Fix this by checking the node's status before adding it to the match list.

Fixes: dc3ea265b856 (drm/msm: Drop the gpu binding)
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626180015.45242-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_drv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index ed9a3a1e50efb..dbfd2c006f740 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -1284,7 +1284,8 @@ static int add_gpu_components(struct device *dev,
 	if (!np)
 		return 0;
 
-	drm_of_component_match_add(dev, matchptr, compare_of, np);
+	if (of_device_is_available(np))
+		drm_of_component_match_add(dev, matchptr, compare_of, np);
 
 	of_node_put(np);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 28/32] drm/exynos: fix missing decrement of retry counter

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 1bbbab097a05276e312dd2462791d32b21ceb1ee ]

Currently the retry counter is not being decremented, leading to a
potential infinite spin if the scalar_reads don't change state.

Addresses-Coverity: ("Infinite loop")
Fixes: 280e54c9f614 ("drm/exynos: scaler: Reset hardware before starting the operation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/exynos/exynos_drm_scaler.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_scaler.c b/drivers/gpu/drm/exynos/exynos_drm_scaler.c
index 0ddb6eec7b113..df228436a03d9 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_scaler.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_scaler.c
@@ -108,12 +108,12 @@ static inline int scaler_reset(struct scaler_context *scaler)
 	scaler_write(SCALER_CFG_SOFT_RESET, SCALER_CFG);
 	do {
 		cpu_relax();
-	} while (retry > 1 &&
+	} while (--retry > 1 &&
 		 scaler_read(SCALER_CFG) & SCALER_CFG_SOFT_RESET);
 	do {
 		cpu_relax();
 		scaler_write(1, SCALER_INT_EN);
-	} while (retry > 0 && scaler_read(SCALER_INT_EN) != 1);
+	} while (--retry > 0 && scaler_read(SCALER_INT_EN) != 1);
 
 	return retry ? 0 : -EIO;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 29/32] Revert "kmemleak: allow to coexist with fault injection"

[Sasha Levin]

From: Yang Shi <yang.shi@linux.alibaba.com>

[ Upstream commit df9576def004d2cd5beedc00cb6e8901427634b9 ]

When running ltp's oom test with kmemleak enabled, the below warning was
triggerred since kernel detects __GFP_NOFAIL & ~__GFP_DIRECT_RECLAIM is
passed in:

  WARNING: CPU: 105 PID: 2138 at mm/page_alloc.c:4608 __alloc_pages_nodemask+0x1c31/0x1d50
  Modules linked in: loop dax_pmem dax_pmem_core ip_tables x_tables xfs virtio_net net_failover virtio_blk failover ata_generic virtio_pci virtio_ring virtio libata
  CPU: 105 PID: 2138 Comm: oom01 Not tainted 5.2.0-next-20190710+ #7
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
  RIP: 0010:__alloc_pages_nodemask+0x1c31/0x1d50
  ...
   kmemleak_alloc+0x4e/0xb0
   kmem_cache_alloc+0x2a7/0x3e0
   mempool_alloc_slab+0x2d/0x40
   mempool_alloc+0x118/0x2b0
   bio_alloc_bioset+0x19d/0x350
   get_swap_bio+0x80/0x230
   __swap_writepage+0x5ff/0xb20

The mempool_alloc_slab() clears __GFP_DIRECT_RECLAIM, however kmemleak
has __GFP_NOFAIL set all the time due to d9570ee3bd1d4f2 ("kmemleak:
allow to coexist with fault injection").  But, it doesn't make any sense
to have __GFP_NOFAIL and ~__GFP_DIRECT_RECLAIM specified at the same
time.

According to the discussion on the mailing list, the commit should be
reverted for short term solution.  Catalin Marinas would follow up with
a better solution for longer term.

The failure rate of kmemleak metadata allocation may increase in some
circumstances, but this should be expected side effect.

Link: http://lkml.kernel.org/r/1563299431-111710-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: d9570ee3bd1d4f2 ("kmemleak: allow to coexist with fault injection")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/kmemleak.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index 6c94b6865ac22..5eeabece0c178 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -126,7 +126,7 @@
 /* GFP bitmask for kmemleak internal allocations */
 #define gfp_kmemleak_mask(gfp)	(((gfp) & (GFP_KERNEL | GFP_ATOMIC)) | \
 				 __GFP_NORETRY | __GFP_NOMEMALLOC | \
-				 __GFP_NOWARN | __GFP_NOFAIL)
+				 __GFP_NOWARN)
 
 /* scanning area inside a memory block */
 struct kmemleak_scan_area {
-- 
2.20.1

[PATCH AUTOSEL 4.19 30/32] ocfs2: remove set but not used variable 'last_hash'

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 7bc36e3ce91471b6377c8eadc0a2f220a2280083 ]

Fixes gcc '-Wunused-but-set-variable' warning:

  fs/ocfs2/xattr.c: In function ocfs2_xattr_bucket_find:
  fs/ocfs2/xattr.c:3828:6: warning: variable last_hash set but not used [-Wunused-but-set-variable]

It's never used and can be removed.

Link: http://lkml.kernel.org/r/20190716132110.34836-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/xattr.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index 3a24ce3deb013..c146e12a8601f 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -3833,7 +3833,6 @@ static int ocfs2_xattr_bucket_find(struct inode *inode,
 	u16 blk_per_bucket = ocfs2_blocks_per_xattr_bucket(inode->i_sb);
 	int low_bucket = 0, bucket, high_bucket;
 	struct ocfs2_xattr_bucket *search;
-	u32 last_hash;
 	u64 blkno, lower_blkno = 0;
 
 	search = ocfs2_xattr_bucket_new(inode);
@@ -3877,8 +3876,6 @@ static int ocfs2_xattr_bucket_find(struct inode *inode,
 		if (xh->xh_count)
 			xe = &xh->xh_entries[le16_to_cpu(xh->xh_count) - 1];
 
-		last_hash = le32_to_cpu(xe->xe_name_hash);
-
 		/* record lower_blkno which may be the insert place. */
 		lower_blkno = blkno;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 31/32] coredump: split pipe command whitespace before expanding template

[Sasha Levin]

From: Paul Wise <pabs3@bonedaddy.net>

[ Upstream commit 315c69261dd3fa12dbc830d4fa00d1fad98d3b03 ]

Save the offsets of the start of each argument to avoid having to update
pointers to each argument after every corename krealloc and to avoid
having to duplicate the memory for the dump command.

Executable names containing spaces were previously being expanded from
%e or %E and then split in the middle of the filename.  This is
incorrect behaviour since an argument list can represent arguments with
spaces.

The splitting could lead to extra arguments being passed to the core
dump handler that it might have interpreted as options or ignored
completely.

Core dump handlers that are not aware of this Linux kernel issue will be
using %e or %E without considering that it may be split and so they will
be vulnerable to processes with spaces in their names breaking their
argument list.  If their internals are otherwise well written, such as
if they are written in shell but quote arguments, they will work better
after this change than before.  If they are not well written, then there
is a slight chance of breakage depending on the details of the code but
they will already be fairly broken by the split filenames.

Core dump handlers that are aware of this Linux kernel issue will be
placing %e or %E as the last item in their core_pattern and then
aggregating all of the remaining arguments into one, separated by
spaces.  Alternatively they will be obtaining the filename via other
methods.  Both of these will be compatible with the new arrangement.

A side effect from this change is that unknown template types (for
example %z) result in an empty argument to the dump handler instead of
the argument being dropped.  This is a desired change as:

It is easier for dump handlers to process empty arguments than dropped
ones, especially if they are written in shell or don't pass each
template item with a preceding command-line option in order to
differentiate between individual template types.  Most core_patterns in
the wild do not use options so they can confuse different template types
(especially numeric ones) if an earlier one gets dropped in old kernels.
If the kernel introduces a new template type and a core_pattern uses it,
the core dump handler might not expect that the argument can be dropped
in old kernels.

For example, this can result in security issues when %d is dropped in
old kernels.  This happened with the corekeeper package in Debian and
resulted in the interface between corekeeper and Linux having to be
rewritten to use command-line options to differentiate between template
types.

The core_pattern for most core dump handlers is written by the handler
author who would generally not insert unknown template types so this
change should be compatible with all the core dump handlers that exist.

Link: http://lkml.kernel.org/r/20190528051142.24939-1-pabs3@bonedaddy.net
Fixes: 74aadce98605 ("core_pattern: allow passing of arguments to user mode helper when core_pattern is a pipe")
Signed-off-by: Paul Wise <pabs3@bonedaddy.net>
Reported-by: Jakub Wilk <jwilk@jwilk.net> [https://bugs.debian.org/924398]
Reported-by: Paul Wise <pabs3@bonedaddy.net> [https://lore.kernel.org/linux-fsdevel/c8b7ecb8508895bf4adb62a748e2ea2c71854597.camel@bonedaddy.net/]
Suggested-by: Jakub Wilk <jwilk@jwilk.net>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/coredump.c | 44 +++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 39 insertions(+), 5 deletions(-)

diff --git a/fs/coredump.c b/fs/coredump.c
index 1e2c87acac9b0..a49acb49dce03 100644
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -7,6 +7,7 @@
 #include <linux/stat.h>
 #include <linux/fcntl.h>
 #include <linux/swap.h>
+#include <linux/ctype.h>
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/pagemap.h>
@@ -187,11 +188,13 @@ static int cn_print_exe_file(struct core_name *cn)
  * name into corename, which must have space for at least
  * CORENAME_MAX_SIZE bytes plus one byte for the zero terminator.
  */
-static int format_corename(struct core_name *cn, struct coredump_params *cprm)
+static int format_corename(struct core_name *cn, struct coredump_params *cprm,
+			   size_t **argv, int *argc)
 {
 	const struct cred *cred = current_cred();
 	const char *pat_ptr = core_pattern;
 	int ispipe = (*pat_ptr == '|');
+	bool was_space = false;
 	int pid_in_pattern = 0;
 	int err = 0;
 
@@ -201,12 +204,35 @@ static int format_corename(struct core_name *cn, struct coredump_params *cprm)
 		return -ENOMEM;
 	cn->corename[0] = '\0';
 
-	if (ispipe)
+	if (ispipe) {
+		int argvs = sizeof(core_pattern) / 2;
+		(*argv) = kmalloc_array(argvs, sizeof(**argv), GFP_KERNEL);
+		if (!(*argv))
+			return -ENOMEM;
+		(*argv)[(*argc)++] = 0;
 		++pat_ptr;
+	}
 
 	/* Repeat as long as we have more pattern to process and more output
 	   space */
 	while (*pat_ptr) {
+		/*
+		 * Split on spaces before doing template expansion so that
+		 * %e and %E don't get split if they have spaces in them
+		 */
+		if (ispipe) {
+			if (isspace(*pat_ptr)) {
+				was_space = true;
+				pat_ptr++;
+				continue;
+			} else if (was_space) {
+				was_space = false;
+				err = cn_printf(cn, "%c", '\0');
+				if (err)
+					return err;
+				(*argv)[(*argc)++] = cn->used;
+			}
+		}
 		if (*pat_ptr != '%') {
 			err = cn_printf(cn, "%c", *pat_ptr++);
 		} else {
@@ -546,6 +572,8 @@ void do_coredump(const siginfo_t *siginfo)
 	struct cred *cred;
 	int retval = 0;
 	int ispipe;
+	size_t *argv = NULL;
+	int argc = 0;
 	struct files_struct *displaced;
 	/* require nonrelative corefile path and be extra careful */
 	bool need_suid_safe = false;
@@ -592,9 +620,10 @@ void do_coredump(const siginfo_t *siginfo)
 
 	old_cred = override_creds(cred);
 
-	ispipe = format_corename(&cn, &cprm);
+	ispipe = format_corename(&cn, &cprm, &argv, &argc);
 
 	if (ispipe) {
+		int argi;
 		int dump_count;
 		char **helper_argv;
 		struct subprocess_info *sub_info;
@@ -637,12 +666,16 @@ void do_coredump(const siginfo_t *siginfo)
 			goto fail_dropcount;
 		}
 
-		helper_argv = argv_split(GFP_KERNEL, cn.corename, NULL);
+		helper_argv = kmalloc_array(argc + 1, sizeof(*helper_argv),
+					    GFP_KERNEL);
 		if (!helper_argv) {
 			printk(KERN_WARNING "%s failed to allocate memory\n",
 			       __func__);
 			goto fail_dropcount;
 		}
+		for (argi = 0; argi < argc; argi++)
+			helper_argv[argi] = cn.corename + argv[argi];
+		helper_argv[argi] = NULL;
 
 		retval = -ENOMEM;
 		sub_info = call_usermodehelper_setup(helper_argv[0],
@@ -652,7 +685,7 @@ void do_coredump(const siginfo_t *siginfo)
 			retval = call_usermodehelper_exec(sub_info,
 							  UMH_WAIT_EXEC);
 
-		argv_free(helper_argv);
+		kfree(helper_argv);
 		if (retval) {
 			printk(KERN_INFO "Core dump to |%s pipe failed\n",
 			       cn.corename);
@@ -766,6 +799,7 @@ void do_coredump(const siginfo_t *siginfo)
 	if (ispipe)
 		atomic_dec(&core_dump_count);
 fail_unlock:
+	kfree(argv);
 	kfree(cn.corename);
 	coredump_finish(mm, core_dumped);
 	revert_creds(old_cred);
-- 
2.20.1

[PATCH AUTOSEL 4.19 32/32] asm-generic: fix -Wtype-limits compiler warnings

[Sasha Levin]

From: Qian Cai <cai@lca.pw>

[ Upstream commit cbedfe11347fe418621bd188d58a206beb676218 ]

Commit d66acc39c7ce ("bitops: Optimise get_order()") introduced a
compilation warning because "rx_frag_size" is an "ushort" while
PAGE_SHIFT here is 16.

The commit changed the get_order() to be a multi-line macro where
compilers insist to check all statements in the macro even when
__builtin_constant_p(rx_frag_size) will return false as "rx_frag_size"
is a module parameter.

In file included from ./arch/powerpc/include/asm/page_64.h:107,
                 from ./arch/powerpc/include/asm/page.h:242,
                 from ./arch/powerpc/include/asm/mmu.h:132,
                 from ./arch/powerpc/include/asm/lppaca.h:47,
                 from ./arch/powerpc/include/asm/paca.h:17,
                 from ./arch/powerpc/include/asm/current.h:13,
                 from ./include/linux/thread_info.h:21,
                 from ./arch/powerpc/include/asm/processor.h:39,
                 from ./include/linux/prefetch.h:15,
                 from drivers/net/ethernet/emulex/benet/be_main.c:14:
drivers/net/ethernet/emulex/benet/be_main.c: In function 'be_rx_cqs_create':
./include/asm-generic/getorder.h:54:9: warning: comparison is always
true due to limited range of data type [-Wtype-limits]
   (((n) < (1UL << PAGE_SHIFT)) ? 0 :  \
         ^
drivers/net/ethernet/emulex/benet/be_main.c:3138:33: note: in expansion
of macro 'get_order'
  adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE;
                                 ^~~~~~~~~

Fix it by moving all of this multi-line macro into a proper function,
and killing __get_order() off.

[akpm@linux-foundation.org: remove __get_order() altogether]
[cai@lca.pw: v2]
  Link: http://lkml.kernel.org/r/1564000166-31428-1-git-send-email-cai@lca.pw
Link: http://lkml.kernel.org/r/1563914986-26502-1-git-send-email-cai@lca.pw
Fixes: d66acc39c7ce ("bitops: Optimise get_order()")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: James Y Knight <jyknight@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/asm-generic/getorder.h | 50 ++++++++++++++--------------------
 1 file changed, 20 insertions(+), 30 deletions(-)

diff --git a/include/asm-generic/getorder.h b/include/asm-generic/getorder.h
index c64bea7a52beb..e9f20b813a699 100644
--- a/include/asm-generic/getorder.h
+++ b/include/asm-generic/getorder.h
@@ -7,24 +7,6 @@
 #include <linux/compiler.h>
 #include <linux/log2.h>
 
-/*
- * Runtime evaluation of get_order()
- */
-static inline __attribute_const__
-int __get_order(unsigned long size)
-{
-	int order;
-
-	size--;
-	size >>= PAGE_SHIFT;
-#if BITS_PER_LONG == 32
-	order = fls(size);
-#else
-	order = fls64(size);
-#endif
-	return order;
-}
-
 /**
  * get_order - Determine the allocation order of a memory size
  * @size: The size for which to get the order
@@ -43,19 +25,27 @@ int __get_order(unsigned long size)
  * to hold an object of the specified size.
  *
  * The result is undefined if the size is 0.
- *
- * This function may be used to initialise variables with compile time
- * evaluations of constants.
  */
-#define get_order(n)						\
-(								\
-	__builtin_constant_p(n) ? (				\
-		((n) == 0UL) ? BITS_PER_LONG - PAGE_SHIFT :	\
-		(((n) < (1UL << PAGE_SHIFT)) ? 0 :		\
-		 ilog2((n) - 1) - PAGE_SHIFT + 1)		\
-	) :							\
-	__get_order(n)						\
-)
+static inline __attribute_const__ int get_order(unsigned long size)
+{
+	if (__builtin_constant_p(size)) {
+		if (!size)
+			return BITS_PER_LONG - PAGE_SHIFT;
+
+		if (size < (1UL << PAGE_SHIFT))
+			return 0;
+
+		return ilog2((size) - 1) - PAGE_SHIFT + 1;
+	}
+
+	size--;
+	size >>= PAGE_SHIFT;
+#if BITS_PER_LONG == 32
+	return fls(size);
+#else
+	return fls64(size);
+#endif
+}
 
 #endif	/* __ASSEMBLY__ */
 
-- 
2.20.1

Re: [PATCH AUTOSEL 4.19 12/32] Btrfs: fix deadlock between fiemap and transaction commits

[David Sterba]

On Tue, Aug 06, 2019 at 05:35:00PM -0400, Sasha Levin wrote:
> From: Filipe Manana <fdmanana@suse.com>
> 
> [ Upstream commit a6d155d2e363f26290ffd50591169cb96c2a609e ]
> 
> Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap")

The commit is a regression fix during the 5.2 cycle, how it could end up
in a 4.19 stable candidate?

$ git describe  03628cdbc64db6
v5.1-rc7-201-g03628cdbc64d

$ git describe --contains 03628cdbc64db6
v5.2-rc1~163^2~26

And it does not belong to 5.2 either, git cherry-pick on top of 5.2
fails.

I think such sanity check can be done automatically so the patches don't
accidentally land in trees where don't belong.

Re: [PATCH AUTOSEL 4.19 12/32] Btrfs: fix deadlock between fiemap and transaction commits

[Greg KH]

On Wed, Aug 07, 2019 at 11:47:59AM +0200, David Sterba wrote:
> On Tue, Aug 06, 2019 at 05:35:00PM -0400, Sasha Levin wrote:
> > From: Filipe Manana <fdmanana@suse.com>
> > 
> > [ Upstream commit a6d155d2e363f26290ffd50591169cb96c2a609e ]
> > 
> > Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap")
> 
> The commit is a regression fix during the 5.2 cycle, how it could end up
> in a 4.19 stable candidate?
> 
> $ git describe  03628cdbc64db6
> v5.1-rc7-201-g03628cdbc64d
> 
> $ git describe --contains 03628cdbc64db6
> v5.2-rc1~163^2~26
> 
> And it does not belong to 5.2 either, git cherry-pick on top of 5.2
> fails.
> 
> I think such sanity check can be done automatically so the patches don't
> accidentally land in trees where don't belong.


Commit 03628cdbc64d ("Btrfs: do not start a transaction during fiemap")
was tagged for the stable trees, and ended up in the following releases:
	4.14.121 4.19.45 5.0.18 5.1.4 5.2
so yes, it does need to go back to all of those locations if this patch
really does fix the issue there.

thanks,

greg k-h

Re: [PATCH AUTOSEL 4.19 12/32] Btrfs: fix deadlock between fiemap and transaction commits

[David Sterba]

On Wed, Aug 07, 2019 at 12:51:26PM +0200, Greg KH wrote:
> On Wed, Aug 07, 2019 at 11:47:59AM +0200, David Sterba wrote:
> > On Tue, Aug 06, 2019 at 05:35:00PM -0400, Sasha Levin wrote:
> > > From: Filipe Manana <fdmanana@suse.com>
> > > 
> > > [ Upstream commit a6d155d2e363f26290ffd50591169cb96c2a609e ]
> > > 
> > > Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap")
> > 
> > The commit is a regression fix during the 5.2 cycle, how it could end up
> > in a 4.19 stable candidate?
> > 
> > $ git describe  03628cdbc64db6
> > v5.1-rc7-201-g03628cdbc64d
> > 
> > $ git describe --contains 03628cdbc64db6
> > v5.2-rc1~163^2~26
> > 
> > And it does not belong to 5.2 either, git cherry-pick on top of 5.2
> > fails.
> > 
> > I think such sanity check can be done automatically so the patches don't
> > accidentally land in trees where don't belong.
> 
> 
> Commit 03628cdbc64d ("Btrfs: do not start a transaction during fiemap")
> was tagged for the stable trees, and ended up in the following releases:
> 	4.14.121 4.19.45 5.0.18 5.1.4 5.2
> so yes, it does need to go back to all of those locations if this patch
> really does fix the issue there.

You're right, I did not notice the CC tag when examining the patches.