From: Jerome Brunet <jbrunet@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>,
linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/2] clk: meson: axg-audio: add g12a reset support
Date: Mon, 12 Aug 2019 14:32:53 +0200 [thread overview]
Message-ID: <20190812123253.4734-3-jbrunet@baylibre.com> (raw)
In-Reply-To: <20190812123253.4734-1-jbrunet@baylibre.com>
On the g12a, the register space dedicated to the audio clock also
provides some resets. Let the clock controller register a reset
provider as well for this SoC family.
the axg SoC family does not appear to provide this feature.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/clk/meson/axg-audio.c | 107 +++++++++++++++++++++++++++++++++-
drivers/clk/meson/axg-audio.h | 1 +
2 files changed, 106 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/meson/axg-audio.c b/drivers/clk/meson/axg-audio.c
index 741df7e955ca..6be9df1efce5 100644
--- a/drivers/clk/meson/axg-audio.c
+++ b/drivers/clk/meson/axg-audio.c
@@ -12,6 +12,7 @@
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
+#include <linux/reset-controller.h>
#include <linux/slab.h>
#include "axg-audio.h"
@@ -918,6 +919,84 @@ static int devm_clk_get_enable(struct device *dev, char *id)
return 0;
}
+struct axg_audio_reset_data {
+ struct reset_controller_dev rstc;
+ struct regmap *map;
+ unsigned int offset;
+};
+
+static void axg_audio_reset_reg_and_bit(struct axg_audio_reset_data *rst,
+ unsigned long id,
+ unsigned int *reg,
+ unsigned int *bit)
+{
+ unsigned int stride = regmap_get_reg_stride(rst->map);
+
+ *reg = (id / (stride * BITS_PER_BYTE)) * stride;
+ *reg += rst->offset;
+ *bit = id % (stride * BITS_PER_BYTE);
+}
+
+static int axg_audio_reset_update(struct reset_controller_dev *rcdev,
+ unsigned long id, bool assert)
+{
+ struct axg_audio_reset_data *rst =
+ container_of(rcdev, struct axg_audio_reset_data, rstc);
+ unsigned int offset, bit;
+
+ axg_audio_reset_reg_and_bit(rst, id, &offset, &bit);
+
+ regmap_update_bits(rst->map, offset, BIT(bit),
+ assert ? BIT(bit) : 0);
+
+ return 0;
+}
+
+static int axg_audio_reset_status(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct axg_audio_reset_data *rst =
+ container_of(rcdev, struct axg_audio_reset_data, rstc);
+ unsigned int val, offset, bit;
+
+ axg_audio_reset_reg_and_bit(rst, id, &offset, &bit);
+
+ regmap_read(rst->map, offset, &val);
+
+ return !!(val & BIT(bit));
+}
+
+static int axg_audio_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return axg_audio_reset_update(rcdev, id, true);
+}
+
+static int axg_audio_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return axg_audio_reset_update(rcdev, id, false);
+}
+
+static int axg_audio_reset_toggle(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ int ret;
+
+ ret = axg_audio_reset_assert(rcdev, id);
+ if (ret)
+ return ret;
+
+ return axg_audio_reset_deassert(rcdev, id);
+}
+
+static const struct reset_control_ops axg_audio_rstc_ops = {
+ .assert = axg_audio_reset_assert,
+ .deassert = axg_audio_reset_deassert,
+ .reset = axg_audio_reset_toggle,
+ .status = axg_audio_reset_status,
+};
+
static const struct regmap_config axg_audio_regmap_cfg = {
.reg_bits = 32,
.val_bits = 32,
@@ -927,12 +1006,15 @@ static const struct regmap_config axg_audio_regmap_cfg = {
struct audioclk_data {
struct clk_hw_onecell_data *hw_onecell_data;
+ unsigned int reset_offset;
+ unsigned int reset_num;
};
static int axg_audio_clkc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
const struct audioclk_data *data;
+ struct axg_audio_reset_data *rst;
struct regmap *map;
struct resource *res;
void __iomem *regs;
@@ -984,8 +1066,27 @@ static int axg_audio_clkc_probe(struct platform_device *pdev)
}
}
- return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
- data->hw_onecell_data);
+ ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ data->hw_onecell_data);
+ if (ret)
+ return ret;
+
+ /* Stop here if there is no reset */
+ if (!data->reset_num)
+ return 0;
+
+ rst = devm_kzalloc(dev, sizeof(*rst), GFP_KERNEL);
+ if (!rst)
+ return -ENOMEM;
+
+ rst->map = map;
+ rst->offset = data->reset_offset;
+ rst->rstc.nr_resets = data->reset_num;
+ rst->rstc.ops = &axg_audio_rstc_ops;
+ rst->rstc.of_node = dev->of_node;
+ rst->rstc.owner = THIS_MODULE;
+
+ return devm_reset_controller_register(dev, &rst->rstc);
}
static const struct audioclk_data axg_audioclk_data = {
@@ -994,6 +1095,8 @@ static const struct audioclk_data axg_audioclk_data = {
static const struct audioclk_data g12a_audioclk_data = {
.hw_onecell_data = &g12a_audio_hw_onecell_data,
+ .reset_offset = AUDIO_SW_RESET,
+ .reset_num = 26,
};
static const struct of_device_id clkc_match_table[] = {
diff --git a/drivers/clk/meson/axg-audio.h b/drivers/clk/meson/axg-audio.h
index 5d972d55d6c7..c00e28b2e1a9 100644
--- a/drivers/clk/meson/axg-audio.h
+++ b/drivers/clk/meson/axg-audio.h
@@ -22,6 +22,7 @@
#define AUDIO_MCLK_F_CTRL 0x018
#define AUDIO_MST_PAD_CTRL0 0x01c
#define AUDIO_MST_PAD_CTRL1 0x020
+#define AUDIO_SW_RESET 0x024
#define AUDIO_MST_A_SCLK_CTRL0 0x040
#define AUDIO_MST_A_SCLK_CTRL1 0x044
#define AUDIO_MST_B_SCLK_CTRL0 0x048
--
2.21.0
next prev parent reply other threads:[~2019-08-12 12:33 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-12 12:32 [PATCH v2 0/2] clk: meson: axg-audio: add reset support Jerome Brunet
2019-08-12 12:32 ` [PATCH v2 1/2] dt-bindings: clock: meson: add resets to the audio clock controller Jerome Brunet
2019-08-14 13:46 ` Neil Armstrong
2019-08-12 12:32 ` Jerome Brunet [this message]
2019-08-14 13:46 ` [PATCH v2 2/2] clk: meson: axg-audio: add g12a reset support Neil Armstrong
2019-08-20 9:53 ` [PATCH v2 0/2] clk: meson: axg-audio: add " Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190812123253.4734-3-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).