linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shawn Guo <shawnguo@kernel.org>
To: Yinbo Zhu <yinbo.zhu@nxp.com>
Cc: Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
	xiaobo.xie@nxp.com, jiafei.pan@nxp.com,
	Mark Rutland <mark.rutland@arm.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org,
	yangbo.lu@nxp.com, Ashish Kumar <Ashish.Kumar@nxp.com>
Subject: Re: [PATCH v4] arm64: dts: ls1028a: Add esdhc node in dts
Date: Mon, 12 Aug 2019 15:55:59 +0200	[thread overview]
Message-ID: <20190812135556.GG27041@X250> (raw)
In-Reply-To: <20190805102641.3732-1-yinbo.zhu@nxp.com>

On Mon, Aug 05, 2019 at 06:26:41PM +0800, Yinbo Zhu wrote:
> From: Ashish Kumar <Ashish.Kumar@nxp.com>
> 
> This patch is to add esdhc node and enable SD UHS-I,
> eMMC HS200 for ls1028ardb/ls1028aqds board.
> 
> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
> ---
> Change in v4:
> 		put esdhc 'status' at end of property list.
> 		sort the nodes in unit-address
> 		Use IRQ_TYPE_LEVEL_HIGH represent 0x4 in "interrupts = <0 28 0x4>"
> 
>  arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts |  8 +++++++
>  arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 13 +++++++++++
>  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi    | 27 +++++++++++++++++++++++
>  3 files changed, 48 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> index de6ef39..5e14e5a 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> @@ -95,6 +95,14 @@
>  	status = "okay";
>  };
>  
> +&esdhc {
> +	status = "okay";
> +};
> +
> +&esdhc1 {
> +	status = "okay";
> +};
> +
>  &i2c0 {
>  	status = "okay";
>  
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> index 9fb9113..12c9cd3 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> @@ -83,6 +83,19 @@
>  	};
>  };
>  
> +&esdhc {
> +	sd-uhs-sdr104;
> +	sd-uhs-sdr50;
> +	sd-uhs-sdr25;
> +	sd-uhs-sdr12;
> +	status = "okay";
> +	};

Fix indent.

> +
> +&esdhc1 {
> +	mmc-hs200-1_8v;
> +	status = "okay";
> +	};

Ditto

Shawn

> +
>  &i2c0 {
>  	status = "okay";
>  
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 7975519..f299075 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -245,6 +245,33 @@
>  			status = "disabled";
>  		};
>  
> +		esdhc: mmc@2140000 {
> +			compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
> +			reg = <0x0 0x2140000 0x0 0x10000>;
> +			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> +			clock-frequency = <0>; /* fixed up by bootloader */
> +			clocks = <&clockgen 2 1>;
> +			voltage-ranges = <1800 1800 3300 3300>;
> +			sdhci,auto-cmd12;
> +			little-endian;
> +			bus-width = <4>;
> +			status = "disabled";
> +		};
> +
> +		esdhc1: mmc@2150000 {
> +			compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
> +			reg = <0x0 0x2150000 0x0 0x10000>;
> +			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
> +			clock-frequency = <0>; /* fixed up by bootloader */
> +			clocks = <&clockgen 2 1>;
> +			voltage-ranges = <1800 1800 3300 3300>;
> +			sdhci,auto-cmd12;
> +			broken-cd;
> +			little-endian;
> +			bus-width = <4>;
> +			status = "disabled";
> +		};
> +
>  		duart0: serial@21c0500 {
>  			compatible = "fsl,ns16550", "ns16550a";
>  			reg = <0x00 0x21c0500 0x0 0x100>;
> -- 
> 2.9.5
> 

      reply	other threads:[~2019-08-12 13:56 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-05 10:26 [PATCH v4] arm64: dts: ls1028a: Add esdhc node in dts Yinbo Zhu
2019-08-12 13:55 ` Shawn Guo [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190812135556.GG27041@X250 \
    --to=shawnguo@kernel.org \
    --cc=Ashish.Kumar@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jiafei.pan@nxp.com \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=xiaobo.xie@nxp.com \
    --cc=yangbo.lu@nxp.com \
    --cc=yinbo.zhu@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).