linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Helen Koike <helen.koike@collabora.com>
Cc: "Shuah Khan" <skhan@linuxfoundation.org>,
	"André Almeida" <andrealmeid@collabora.com>,
	mchehab@kernel.org, hverkuil@xs4all.nl,
	linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
	kernel@collabora.com
Subject: Re: [PATCH 0/3] Collapse vimc into single monolithic driver
Date: Tue, 13 Aug 2019 12:56:54 +0300	[thread overview]
Message-ID: <20190813095654.GA5009@pendragon.ideasonboard.com> (raw)
In-Reply-To: <e81df4a5-2393-e341-258c-abf55babe519@collabora.com>

Hi Helen,

On Mon, Aug 12, 2019 at 08:41:33PM -0300, Helen Koike wrote:
> On 8/12/19 7:14 PM, Shuah Khan wrote:
> > On 8/12/19 1:10 PM, Shuah Khan wrote:
> >> On 8/12/19 12:52 PM, André Almeida wrote:
> >>> On 8/12/19 11:08 AM, Shuah Khan wrote:
> >>>> On 8/9/19 9:51 PM, Helen Koike wrote:
> >>>>> On 8/9/19 9:24 PM, André Almeida wrote:
> >>>>>> On 8/9/19 9:17 PM, Shuah Khan wrote:
> >>>>>>> On 8/9/19 5:52 PM, André Almeida wrote:
> >>>>>>>> On 8/9/19 6:45 PM, Shuah Khan wrote:
> >>>>>>>>> vimc uses Component API to split the driver into functional
> >>>>>>>>> components.
> >>>>>>>>> The real hardware resembles a monolith structure than component and
> >>>>>>>>> component structure added a level of complexity making it hard to
> >>>>>>>>> maintain without adding any real benefit.
> >>>>>>>>>        The sensor is one vimc component that would makes sense to be a
> >>>>>>>>> separate
> >>>>>>>>> module to closely align with the real hardware. It would be easier to
> >>>>>>>>> collapse vimc into single monolithic driver first and then split the
> >>>>>>>>> sensor off as a separate module.
> >>>>>>>>>
> >>>>>>>>> This patch series emoves the component API and makes minimal
> >>>>>>>>> changes to
> >>>>>>>>> the code base preserving the functional division of the code
> >>>>>>>>> structure.
> >>>>>>>>> Preserving the functional structure allows us to split the sensor off
> >>>>>>>>> as a separate module in the future.
> >>>>>>>>>
> >>>>>>>>> Major design elements in this change are:
> >>>>>>>>>        - Use existing struct vimc_ent_config and struct
> >>>>>>>>> vimc_pipeline_config
> >>>>>>>>>          to drive the initialization of the functional components.
> >>>>>>>>>        - Make vimc_ent_config global by moving it to vimc.h
> >>>>>>>>>        - Add two new hooks add and rm to initialize and register,
> >>>>>>>>> unregister
> >>>>>>>>>          and free subdevs.
> >>>>>>>>>        - All component API is now gone and bind and unbind hooks are
> >>>>>>>>> modified
> >>>>>>>>>          to do "add" and "rm" with minimal changes to just add and rm
> >>>>>>>>> subdevs.
> >>>>>>>>>        - vimc-core's bind and unbind are now register and unregister.
> >>>>>>>>>        - vimc-core invokes "add" hooks from its
> >>>>>>>>> vimc_register_devices().
> >>>>>>>>>          The "add" hooks remain the same and register subdevs. They
> >>>>>>>>> don't
> >>>>>>>>>          create platform devices of their own and use vimc's
> >>>>>>>>> pdev.dev as
> >>>>>>>>>          their reference device. The "add" hooks save their
> >>>>>>>>> vimc_ent_device(s)
> >>>>>>>>>          in the corresponding vimc_ent_config.
> >>>>>>>>>        - vimc-core invokes "rm" hooks from its unregister to
> >>>>>>>>> unregister
> >>>>>>>>> subdevs
> >>>>>>>>>          and cleanup.
> >>>>>>>>>        - vimc-core invokes "add" and "rm" hooks with pointer to struct
> >>>>>>>>> vimc_device
> >>>>>>>>>          and the corresponding struct vimc_ent_config pointer.
> >>>>>>>>>        The following configure and stream test works on all devices.
> >>>>>>>>>             media-ctl -d platform:vimc -V '"Sensor
> >>>>>>>>> A":0[fmt:SBGGR8_1X8/640x480]'
> >>>>>>>>>        media-ctl -d platform:vimc -V '"Debayer
> >>>>>>>>> A":0[fmt:SBGGR8_1X8/640x480]'
> >>>>>>>>>        media-ctl -d platform:vimc -V '"Sensor
> >>>>>>>>> B":0[fmt:SBGGR8_1X8/640x480]'
> >>>>>>>>>        media-ctl -d platform:vimc -V '"Debayer
> >>>>>>>>> B":0[fmt:SBGGR8_1X8/640x480]'
> >>>>>>>>>             v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v
> >>>>>>>>> width=1920,height=1440
> >>>>>>>>>        v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v
> >>>>>>>>> pixelformat=BA81
> >>>>>>>>>        v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v
> >>>>>>>>> pixelformat=BA81
> >>>>>>>>>             v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video1
> >>>>>>>>>        v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video2
> >>>>>>>>>        v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video3
> >>>>>>>>>
> >>>>>>>>> The third patch in the series fixes a general protection fault found
> >>>>>>>>> when rmmod is done while stream is active.
> >>>>>>>>
> >>>>>>>> I applied your patch on top of media_tree/master and I did some
> >>>>>>>> testing.
> >>>>>>>> Not sure if I did something wrong, but just adding and removing the
> >>>>>>>> module generated a kernel panic:
> >>>>>>>
> >>>>>>> Thanks for testing.
> >>>>>>>
> >>>>>>> Odd. I tested modprobe and rmmod both.I was working on Linux 5.3-rc2.
> >>>>>>> I will apply these to media latest and work from there. I have to
> >>>>>>> rebase these on top of the reverts from Lucas and Helen
> >>>>>>
> >>>>>> Ok, please let me know if I succeeded to reproduce.
> >>>>>>
> >>>>>>>>
> >>>>>>>> ~# modprobe vimc
> >>>>>>>> ~# rmmod vimc
> >>>>>>>> [   16.452974] stack segment: 0000 [#1] SMP PTI
> >>>>>>>> [   16.453688] CPU: 0 PID: 2038 Comm: rmmod Not tainted 5.3.0-rc2+ #36
> >>>>>>>> [   16.454678] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
> >>>>>>>> BIOS 1.12.0-20181126_142135-anatol 04/01/2014
> >>>>>>>> [   16.456191] RIP: 0010:kfree+0x4d/0x240
> >>>>>>>>
> >>>>>>>> <registers values...>
> >>>>>>>>
> >>>>>>>> [   16.469188] Call Trace:
> >>>>>>>> [   16.469666]  vimc_remove+0x35/0x90 [vimc]
> >>>>>>>> [   16.470436]  platform_drv_remove+0x1f/0x40
> >>>>>>>> [   16.471233]  device_release_driver_internal+0xd3/0x1b0
> >>>>>>>> [   16.472184]  driver_detach+0x37/0x6b
> >>>>>>>> [   16.472882]  bus_remove_driver+0x50/0xc1
> >>>>>>>> [   16.473569]  vimc_exit+0xc/0xca0 [vimc]
> >>>>>>>> [   16.474231]  __x64_sys_delete_module+0x18d/0x240
> >>>>>>>> [   16.475036]  do_syscall_64+0x43/0x110
> >>>>>>>> [   16.475656]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
> >>>>>>>> [   16.476504] RIP: 0033:0x7fceb8dafa4b
> >>>>>>>>
> >>>>>>>> <registers values...>
> >>>>>>>>
> >>>>>>>> [   16.484853] Modules linked in: vimc(-) videobuf2_vmalloc
> >>>>>>>> videobuf2_memops v4l2_tpg videobuf2_v4l2 videobuf2_common
> >>>>>>>> [   16.486187] ---[ end trace 91e5e0894e254d49 ]---
> >>>>>>>> [   16.486758] RIP: 0010:kfree+0x4d/0x240
> >>>>>>>>
> >>>>>>>> <registers values...>
> >>>>>>>>
> >>>>>>>> fish: “rmmod vimc” terminated by signal SIGSEGV (Address boundary
> >>>>>>>> error)
> >>>>>>>>
> >>>>>>>> I just added the module after booting, no other action was made.
> >>>>>>>> Here is
> >>>>>>>> how my `git log --oneline` looks like:
> >>>>>>>>
> >>>>>>>> 897d708e922b media: vimc: Fix gpf in rmmod path when stream is active
> >>>>>>>> 2e4a5ad8ad6d media: vimc: Collapse component structure into a single
> >>>>>>>> monolithic driver
> >>>>>>>> 7c8da1687e92 media: vimc: move private defines to a common header
> >>>>>>>> 97299a303532 media: Remove dev_err() usage after platform_get_irq()
> >>>>>>>> 25a3d6bac6b9 media: adv7511/cobalt: rename driver name to adv7511-v4l2
> >>>>>
> >>>>> I couldn't reproduce the error, my tree looks the same:
> >>>>>
> >>>>> [I] koike@floko ~/m/o/linux> git log --oneline
> >>>>> e3345155c8ed (HEAD) media: vimc: Fix gpf in rmmod path when stream is
> >>>>> active
> >>>>> 43e9e2fe761f media: vimc: Collapse component structure into a single
> >>>>> monolithic driver
> >>>>> 8a6d0b9adde0 media: vimc: move private defines to a common header
> >>>>> 97299a303532 (media/master) media: Remove dev_err() usage after
> >>>>> platform_get_irq()
> >>>>> 25a3d6bac6b9 media: adv7511/cobalt: rename driver name to adv7511-v4l2
> >>>>
> >>>> Thanks Helen for trying to reproduce and sharing the result.
> >>>
> >>> Me and Helen found out what is the problem. If you follow this call trace:
> >>>
> >>> vimc_ent_sd_unregister()
> >>> v4l2_device_unregister_subdev()
> >>> v4l2_subdev_release()
> >>>
> >>> You'll notice that this last function calls the `release` callback
> >>> implementation of the subdevice. For instance, the `release` of
> >>> vimc-sensor is this one:
> >>>
> >>> static void vimc_sen_release(struct v4l2_subdev *sd)
> >>> {
> >>>     struct vimc_sen_device *vsen =
> >>>                 container_of(sd, struct vimc_sen_device, sd);
> >>>
> >>>     v4l2_ctrl_handler_free(&vsen->hdl);
> >>>     tpg_free(&vsen->tpg);
> >>>     kfree(vsen);
> >>> }
> >>>
> >>> And then you can see that `vsen` has been freed. Back to
> >>> vimc_ent_sd_unregister(), after v4l2_device_unregister_subdev(), the
> >>> function will call vimc_pads_cleanup(). This is basically a
> >>> kfree(ved->pads), but `ved` has just been freed at
> >>> v4l2_subdev_release(), producing a memory fault.
> >>>
> >>> To fix that, we found two options:
> >>>
> >>> - place the kfree(ved->pads) inside the release callback of each
> >>> subdevice and removing vimc_pads_cleanup() from
> >>> vimc_ent_sd_unregister()
> >>> - use a auxiliary variable to hold the address of the pads, for instance:
> >>>
> >>> void vimc_ent_sd_unregister(...)
> >>> {
> >>>      struct media_pad *pads = ved->pads;
> >>>      ...
> >>>      vimc_pads_cleanup(pads);
> >>> }
> >>>
> >>>
> >>
> >> I fixed a problem in the thirds patch. vimc-capture uses the first
> >> approach - placing the kfree(ved->pads) inside the release callback.
> >>
> >> I am debugging another such problem in unbind path while streaming.
> >> I am working on v2 and I will look for the rmmod problem and fix it.
> >>
> >> thanks again for testing and finding the root cause.
> >> -- Shuah
> > 
> > Hi Andre,
> > 
> > Here is what's happening.
> > 
> > Before this change, you can't really do rmmod vimc, because vimc is in
> > use by other component drivers. With the collapse, now you can actually
> > do rmmod on vimc and this problem in vimc_ent_sd_unregister() that frees
> > pads first and the does v4l2_device_unregister_subdev().
> > 
> > I fixed this in the 3/3 patch. I can reproduce the problem with patches 1 and 2, and patch 3 fixes it.
> > 
> > Did you test with the third patch in this series?
> 
> yes, we tested with 3/3, but the new problem now is when doing the following
> in this order:
> 
>     v4l2_device_unregister_subdev(sd);
>     vimc_pads_cleanup(ved->pads);
> 
> 
> v4l2_device_unregister_subdev() calls the release function of the subdevice that
> frees the ved object, so ved->pads is not valid anymore. That is why André suggested
> a temporary variable to hold ved->pads and to be able to free it later:
> 
>     struct media_pad *pads = ved->pads;
> 
>     v4l2_device_unregister_subdev(sd);
>     vimc_pads_cleanup(pads); // So we don't use the ved object here anymore.

Can't you simply call vimc_pads_cleanup() in the release function of the
subdevice before freeing the ved object ?

-- 
Regards,

Laurent Pinchart

  parent reply	other threads:[~2019-08-13  9:57 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-09 21:45 [PATCH 0/3] Collapse vimc into single monolithic driver Shuah Khan
2019-08-09 21:45 ` [PATCH 1/3] media: vimc: move private defines to a common header Shuah Khan
2019-08-10  3:15   ` Helen Koike
2019-08-12 14:03     ` Shuah Khan
2019-08-10 14:14   ` Laurent Pinchart
2019-08-12 14:19     ` Shuah Khan
2019-08-12 14:24       ` Laurent Pinchart
2019-08-12 14:27         ` Shuah Khan
2019-08-09 21:45 ` [PATCH 2/3] media: vimc: Collapse component structure into a single monolithic driver Shuah Khan
2019-08-10  4:12   ` Helen Koike
2019-08-12 14:12     ` Shuah Khan
2019-08-09 21:45 ` [PATCH 3/3] media: vimc: Fix gpf in rmmod path when stream is active Shuah Khan
2019-08-09 23:52 ` [PATCH 0/3] Collapse vimc into single monolithic driver André Almeida
2019-08-10  0:17   ` Shuah Khan
2019-08-10  0:24     ` André Almeida
2019-08-10  0:48       ` Shuah Khan
2019-08-10  3:51       ` Helen Koike
2019-08-12 14:08         ` Shuah Khan
2019-08-12 18:52           ` André Almeida
2019-08-12 19:10             ` Shuah Khan
2019-08-12 22:14               ` Shuah Khan
2019-08-12 23:41                 ` Helen Koike
2019-08-13  0:58                   ` Shuah Khan
2019-08-13  9:56                   ` Laurent Pinchart [this message]
2019-08-13 12:25                     ` Helen Koike
2019-08-13 12:36                       ` Laurent Pinchart
2019-08-13 23:22                         ` Shuah Khan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190813095654.GA5009@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=andrealmeid@collabora.com \
    --cc=helen.koike@collabora.com \
    --cc=hverkuil@xs4all.nl \
    --cc=kernel@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=skhan@linuxfoundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).