Re: [PATCH v5 2/3] OPP: Add support for bandwidth OPP tables

[Viresh Kumar <viresh.kumar@linaro.org>]

On 07-08-19, 15:31, Saravana Kannan wrote:
> Not all devices quantify their performance points in terms of frequency.
> Devices like interconnects quantify their performance points in terms of
> bandwidth. We need a way to represent these bandwidth levels in OPP. So,
> add support for parsing bandwidth OPPs from DT.
> 
> Signed-off-by: Saravana Kannan <saravanak@google.com>
> ---
>  drivers/opp/of.c  | 41 ++++++++++++++++++++++++++++++++---------
>  drivers/opp/opp.h |  4 +++-
>  2 files changed, 35 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/opp/of.c b/drivers/opp/of.c
> index 1813f5ad5fa2..e1750033fef9 100644
> --- a/drivers/opp/of.c
> +++ b/drivers/opp/of.c
> @@ -523,6 +523,35 @@ void dev_pm_opp_of_remove_table(struct device *dev)
>  }
>  EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
>  
> +static int _read_opp_key(struct dev_pm_opp *new_opp, struct device_node *np)
> +{
> +	int ret;
> +	u64 rate;
> +	u32 bw;
> +
> +	ret = of_property_read_u64(np, "opp-hz", &rate);
> +	if (!ret) {
> +		/*
> +		 * Rate is defined as an unsigned long in clk API, and so
> +		 * casting explicitly to its type. Must be fixed once rate is 64
> +		 * bit guaranteed in clk API.
> +		 */
> +		new_opp->rate = (unsigned long)rate;
> +		return 0;
> +	}
> +

Please read opp-level also here and do error handling.

> +	ret = of_property_read_u32(np, "opp-peak-kBps", &bw);
> +	if (ret)
> +		return ret;
> +	new_opp->rate = (unsigned long) bw;
> +
> +	ret = of_property_read_u32(np, "opp-avg-kBps", &bw);
> +	if (!ret)
> +		new_opp->avg_bw = (unsigned long) bw;

If none of opp-hz/level/peak-kBps are available, print error message here
itself..

> +
> +	return 0;

You are returning 0 on failure as well here.

> +}
> +
>  /**
>   * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings)
>   * @opp_table:	OPP table
> @@ -560,22 +589,16 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,
>  	if (!new_opp)
>  		return ERR_PTR(-ENOMEM);
>  
> -	ret = of_property_read_u64(np, "opp-hz", &rate);
> +	ret = _read_opp_key(new_opp, np);
>  	if (ret < 0) {
>  		/* "opp-hz" is optional for devices like power domains. */
>  		if (!opp_table->is_genpd) {
> -			dev_err(dev, "%s: opp-hz not found\n", __func__);
> +			dev_err(dev, "%s: opp-hz or opp-peak-kBps not found\n",
> +				__func__);
>  			goto free_opp;
>  		}
>  
>  		rate_not_available = true;

Move all above as well to read_opp_key().

> -	} else {
> -		/*
> -		 * Rate is defined as an unsigned long in clk API, and so
> -		 * casting explicitly to its type. Must be fixed once rate is 64
> -		 * bit guaranteed in clk API.
> -		 */
> -		new_opp->rate = (unsigned long)rate;
>  	}
>  
>  	of_property_read_u32(np, "opp-level", &new_opp->level);
> diff --git a/drivers/opp/opp.h b/drivers/opp/opp.h
> index 01a500e2c40a..6bb238af9cac 100644
> --- a/drivers/opp/opp.h
> +++ b/drivers/opp/opp.h
> @@ -56,7 +56,8 @@ extern struct list_head opp_tables;
>   * @turbo:	true if turbo (boost) OPP
>   * @suspend:	true if suspend OPP
>   * @pstate: Device's power domain's performance state.
> - * @rate:	Frequency in hertz
> + * @rate:	Frequency in hertz OR Peak bandwidth in kilobytes per second
> + * @avg_bw:	Average bandwidth in kilobytes per second

Please add separate entry for peak_bw here.

I know you reused rate because you don't want to reimplement the helpers we
have. Maybe we can just update them to return peak_bw when opp-hz isn't present.

>   * @level:	Performance level
>   * @supplies:	Power supplies voltage/current values
>   * @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's
> @@ -78,6 +79,7 @@ struct dev_pm_opp {
>  	bool suspend;
>  	unsigned int pstate;
>  	unsigned long rate;
> +	unsigned long avg_bw;
>  	unsigned int level;
>  
>  	struct dev_pm_opp_supply *supplies;
> -- 
> 2.23.0.rc1.153.gdeed80330f-goog

-- 
viresh