From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.8 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id C2529C3A59E for ; Wed, 21 Aug 2019 13:26:04 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 92DE1233A1 for ; Wed, 21 Aug 2019 13:26:04 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728931AbfHUN0D (ORCPT ); Wed, 21 Aug 2019 09:26:03 -0400 Received: from comms.puri.sm ([159.203.221.185]:44972 "EHLO comms.puri.sm" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728905AbfHUN0C (ORCPT ); Wed, 21 Aug 2019 09:26:02 -0400 Received: from localhost (localhost [127.0.0.1]) by comms.puri.sm (Postfix) with ESMTP id BBA4FDF980; Wed, 21 Aug 2019 06:26:00 -0700 (PDT) Received: from comms.puri.sm ([127.0.0.1]) by localhost (comms.puri.sm [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 2UC9wSW40xKS; Wed, 21 Aug 2019 06:25:59 -0700 (PDT) From: Martin Kepplinger To: lorenzo.bianconi83@gmail.com, jic23@kernel.org, knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net Cc: robh+dt@kernel.org, mark.rutland@arm.com, linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Martin Kepplinger Subject: [PATCH v5 3/4] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1 Date: Wed, 21 Aug 2019 15:25:19 +0200 Message-Id: <20190821132520.28225-4-martin.kepplinger@puri.sm> In-Reply-To: <20190821132520.28225-1-martin.kepplinger@puri.sm> References: <20190821132520.28225-1-martin.kepplinger@puri.sm> Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The LSM9DS1's accelerometer / gyroscope unit and it's magnetometer (separately supported in iio/magnetometer/st_magn*) are located on a separate i2c addresses on the bus. For the datasheet, see https://www.st.com/resource/en/datasheet/lsm9ds1.pdf Treat it just like the LSM6* devices and, despite it's name, hook it up to the st_lsm6dsx driver, using it's basic functionality. accelerometer and gyroscope are not independently clocked. It runs at the gyro frequencies if both are enabled, see chapter 7.12 of the datasheet. We could have handled this as a single IIO device but we have split it up to be more consistent with the other more flexible devices. Despite supporting and testing the LSM9DS1, we call the gyro channels iio_chan_spec struct "st_lsm6ds0_gyro_channels" because the register description is equal. This suggests that supporting LSM6DS0 should be trivial to do. Signed-off-by: Martin Kepplinger --- drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 87 ++++++++++++++++++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 ++ 5 files changed, 100 insertions(+), 1 deletion(-) diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig index 939058b27746..77aa0e77212d 100644 --- a/drivers/iio/imu/st_lsm6dsx/Kconfig +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig @@ -12,7 +12,7 @@ config IIO_ST_LSM6DSX Say yes here to build support for STMicroelectronics LSM6DSx imu sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr, lsm6ds3tr-c, - ism330dhcx + ism330dhcx and the accelerometer/gyroscope of lsm9ds1. To compile this driver as a module, choose M here: the module will be called st_lsm6dsx. diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index 090b7bd3c5b0..196e344301f6 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -24,6 +24,7 @@ #define ST_LSM6DSR_DEV_NAME "lsm6dsr" #define ST_LSM6DS3TRC_DEV_NAME "lsm6ds3tr-c" #define ST_ISM330DHCX_DEV_NAME "ism330dhcx" +#define ST_LSM9DS1_DEV_NAME "lsm9ds1" enum st_lsm6dsx_hw_id { ST_LSM6DS3_ID, @@ -37,6 +38,7 @@ enum st_lsm6dsx_hw_id { ST_LSM6DSR_ID, ST_LSM6DS3TRC_ID, ST_ISM330DHCX_ID, + ST_LSM9DS1_ID, ST_LSM6DSX_MAX_ID, }; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index 1b46d9dc2089..ad839ccf871c 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -10,6 +10,8 @@ * +-125/+-245/+-500/+-1000/+-2000 dps * LSM6DSx series has an integrated First-In-First-Out (FIFO) buffer * allowing dynamic batching of sensor data. + * LSM9DSx series is similar but includes an additional magnetometer, handled + * by a different driver. * * Supported sensors: * - LSM6DS3: @@ -30,6 +32,13 @@ * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 * - FIFO size: 3KB * + * - LSM9DS1: + * - Accelerometer supported ODR [Hz]: 10, 50, 119, 238, 476, 952 + * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 + * - Gyroscope supported ODR [Hz]: 15, 60, 119, 238, 476, 952 + * - Gyroscope supported full-scale [dps]: +-245/+-500/+-2000 + * - FIFO size: 32 + * * Copyright 2016 STMicroelectronics Inc. * * Lorenzo Bianconi @@ -70,7 +79,85 @@ static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = { IIO_CHAN_SOFT_TIMESTAMP(3), }; +static const struct iio_chan_spec st_lsm6ds0_gyro_channels[] = { + ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x18, IIO_MOD_X, 0), + ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x1a, IIO_MOD_Y, 1), + ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x1c, IIO_MOD_Z, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { + { + .wai = 0x68, + .int1_addr = 0x0c, + .int2_addr = 0x0d, + .reset_addr = 0x22, + .max_fifo_size = 32, + .id = { + { + .hw_id = ST_LSM9DS1_ID, + .name = ST_LSM9DS1_DEV_NAME, + }, + }, + .channels = { + [ST_LSM6DSX_ID_ACC] = { + .chan = st_lsm6dsx_acc_channels, + .len = ARRAY_SIZE(st_lsm6dsx_acc_channels), + }, + [ST_LSM6DSX_ID_GYRO] = { + .chan = st_lsm6ds0_gyro_channels, + .len = ARRAY_SIZE(st_lsm6ds0_gyro_channels), + }, + }, + .odr_table = { + [ST_LSM6DSX_ID_ACC] = { + .reg = { + .addr = 0x20, + .mask = GENMASK(7, 5), + }, + .odr_avl[0] = { 10, 0x01 }, + .odr_avl[1] = { 50, 0x02 }, + .odr_avl[2] = { 119, 0x03 }, + .odr_avl[3] = { 238, 0x04 }, + .odr_avl[4] = { 476, 0x05 }, + .odr_avl[5] = { 952, 0x06 }, + }, + [ST_LSM6DSX_ID_GYRO] = { + .reg = { + .addr = 0x10, + .mask = GENMASK(7, 5), + }, + .odr_avl[0] = { 15, 0x01 }, + .odr_avl[1] = { 60, 0x02 }, + .odr_avl[2] = { 119, 0x03 }, + .odr_avl[3] = { 238, 0x04 }, + .odr_avl[4] = { 476, 0x05 }, + .odr_avl[5] = { 952, 0x06 }, + }, + }, + .fs_table = { + [ST_LSM6DSX_ID_ACC] = { + .reg = { + .addr = 0x20, + .mask = GENMASK(4, 3), + }, + .fs_avl[0] = { 599, 0x0 }, + .fs_avl[1] = { 1197, 0x2 }, + .fs_avl[2] = { 2394, 0x3 }, + .fs_avl[3] = { 4788, 0x1 }, + }, + [ST_LSM6DSX_ID_GYRO] = { + .reg = { + .addr = 0x10, + .mask = GENMASK(4, 3), + }, + .fs_avl[0] = { IIO_DEGREE_TO_RAD(245), 0x0 }, + .fs_avl[1] = { IIO_DEGREE_TO_RAD(500), 0x1 }, + .fs_avl[2] = { IIO_DEGREE_TO_RAD(0), 0x2 }, + .fs_avl[3] = { IIO_DEGREE_TO_RAD(2000), 0x3 }, + }, + }, + }, { .wai = 0x69, .int1_addr = 0x0d, diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c index 15c6aa5b6caa..2f1b30ff083b 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c @@ -83,6 +83,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = { .compatible = "st,ism330dhcx", .data = (void *)ST_ISM330DHCX_ID, }, + { + .compatible = "st,lsm9ds1", + .data = (void *)ST_LSM9DS1_ID, + }, {}, }; MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match); @@ -99,6 +103,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = { { ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID }, { ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID }, { ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID }, + { ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID }, {}, }; MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table); diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c index a8430ee11310..421ce704f346 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c @@ -83,6 +83,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = { .compatible = "st,ism330dhcx", .data = (void *)ST_ISM330DHCX_ID, }, + { + .compatible = "st,lsm9ds1", + .data = (void *)ST_LSM9DS1_ID, + }, {}, }; MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match); @@ -99,6 +103,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = { { ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID }, { ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID }, { ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID }, + { ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID }, {}, }; MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table); -- 2.20.1