From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com
Cc: linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Neil Armstrong <narmstrong@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: [PATCH v2 01/14] arm64: dts: meson: fix ethernet mac reg format
Date: Wed, 21 Aug 2019 16:20:30 +0200 [thread overview]
Message-ID: <20190821142043.14649-2-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190821142043.14649-1-narmstrong@baylibre.com>
This fixes the following DT schemas check errors:
meson-axg-s400.dt.yaml: soc: ethernet@ff3f0000:reg:0: [0, 4282318848, 0, 65536, 0, 4284695872, 0, 8] is too long
meson-axg-s400.dt.yaml: ethernet@ff3f0000: reg: [[0, 4282318848, 0, 65536, 0, 4284695872, 0, 8]] is too short
meson-g12a-u200.dt.yaml: soc: ethernet@ff3f0000:reg:0: [0, 4282318848, 0, 65536, 0, 4284695872, 0, 8] is too long
meson-g12a-u200.dt.yaml: ethernet@ff3f0000: reg: [[0, 4282318848, 0, 65536, 0, 4284695872, 0, 8]] is too short
meson-gxbb-nanopi-k2.dt.yaml: soc: ethernet@c9410000:reg:0: [0, 3376480256, 0, 65536, 0, 3364046144, 0, 4] is too long
meson-gxl-s805x-libretech-ac.dt.yaml: soc: ethernet@c9410000:reg:0: [0, 3376480256, 0, 65536, 0, 3364046144, 0, 4] is too lon
while here, also drop the redundant reg property from meson-gxl.dtsi
because it had the same value as meson-gx.dtsi from which it inherits.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 4 ++--
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 4 ++--
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 3 ---
4 files changed, 6 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 6219337033a0..4a134d29491d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -174,8 +174,8 @@
compatible = "amlogic,meson-axg-dwmac",
"snps,dwmac-3.70a",
"snps,dwmac";
- reg = <0x0 0xff3f0000 0x0 0x10000
- 0x0 0xff634540 0x0 0x8>;
+ reg = <0x0 0xff3f0000 0x0 0x10000>,
+ <0x0 0xff634540 0x0 0x8>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
clocks = <&clkc CLKID_ETH>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index f8d43e3dcf20..465106d37289 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -141,8 +141,8 @@
compatible = "amlogic,meson-axg-dwmac",
"snps,dwmac-3.70a",
"snps,dwmac";
- reg = <0x0 0xff3f0000 0x0 0x10000
- 0x0 0xff634540 0x0 0x8>;
+ reg = <0x0 0xff3f0000 0x0 0x10000>,
+ <0x0 0xff634540 0x0 0x8>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
clocks = <&clkc CLKID_ETH>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 74d03fc706be..faff77175486 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -489,8 +489,8 @@
compatible = "amlogic,meson-gxbb-dwmac",
"snps,dwmac-3.70a",
"snps,dwmac";
- reg = <0x0 0xc9410000 0x0 0x10000
- 0x0 0xc8834540 0x0 0x4>;
+ reg = <0x0 0xc9410000 0x0 0x10000>,
+ <0x0 0xc8834540 0x0 0x4>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
status = "disabled";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index c959456bacc6..ee1ecdbcc958 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -80,9 +80,6 @@
};
ðmac {
- reg = <0x0 0xc9410000 0x0 0x10000
- 0x0 0xc8834540 0x0 0x4>;
-
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
<&clkc CLKID_MPLL2>;
--
2.22.0
next prev parent reply other threads:[~2019-08-21 14:21 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-21 14:20 [PATCH v2 00/14] arm64: dts: meson: fixes following YAML bindings schemas conversion Neil Armstrong
2019-08-21 14:20 ` Neil Armstrong [this message]
2019-08-21 14:20 ` [PATCH v2 02/14] arm64: dts: meson-gx: drop the vpu dmc memory cell Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 03/14] arm64: dts: meson-gx: fix reset controller compatible Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 04/14] arm64: dts: meson-gx: fix spifc compatible Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 05/14] arm64: dts: meson-gx: fix watchdog compatible Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 06/14] arm64: dts: meson-gx: fix mhu compatible Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 07/14] arm64: dts: meson-gx: fix periphs bus node name Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 08/14] arm64: dts: meson-gxl: fix internal phy compatible Neil Armstrong
2019-08-21 21:16 ` Martin Blumenstingl
2019-08-21 14:20 ` [PATCH v2 09/14] arm64: dts: meson-axg: fix MHU compatible Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 10/14] arm64: dts: meson-g12a: fix reset controller compatible Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 11/14] arm64: dts: meson-g12a-x96-max: fix compatible Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 12/14] arm64: dts: meson-gxbb-nanopi-k2: add missing model Neil Armstrong
2019-08-21 21:15 ` Martin Blumenstingl
2019-08-21 14:20 ` [PATCH v2 13/14] arm64: dts: meson-gxbb-p201: fix snps,reset-delays-us format Neil Armstrong
2019-08-21 14:20 ` [PATCH v2 14/14] arm64: dts: meson: fix boards regulators states format Neil Armstrong
2019-08-22 22:26 ` [PATCH v2 00/14] arm64: dts: meson: fixes following YAML bindings schemas conversion Kevin Hilman
2019-08-23 6:53 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190821142043.14649-2-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).