linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	bhelgaas@google.com, l.subrahmanya@mobiveil.co.in,
	leoyang.li@nxp.com
Subject: Re: [PATCHv7] PCI: mobiveil: Fix the CPU base address setup in inbound window
Date: Wed, 21 Aug 2019 17:59:22 +0100	[thread overview]
Message-ID: <20190821165922.GA3915@e121166-lin.cambridge.arm.com> (raw)
In-Reply-To: <20190713141129.32249-1-Zhiqiang.Hou@nxp.com>

On Sat, Jul 13, 2019 at 10:11:29PM +0800, Hou Zhiqiang wrote:
> The current code erroneously sets-up the CPU base address with
> parameter 'pci_addr', which is passed to initialize the PCI
> base address of the inbound window, and the upper 32-bit of the
> CPU base address of the inbound window is not initialized. This
> results in the current code only support 1:1 inbound window
> with limitation that the base address must be < 4GB.
> 
> This patch introduces a new parameter 'u64 cpu_addr' to initialize
> both lower 32-bit and upper 32-bit of the CPU base address to make
> it can support non 1:1 inbound window and fix the base address must
> be < 4GB limitation.
> 
> Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver")
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
> ---
> V7:
>  - This patch is #25 of V6 patches, rewrote the changelog.
> 
>  drivers/pci/controller/pcie-mobiveil.c | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)

Applied to pci/mobiveil for v5.4, thanks.

Lorenzo

> diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
> index 672e633..a45a644 100644
> --- a/drivers/pci/controller/pcie-mobiveil.c
> +++ b/drivers/pci/controller/pcie-mobiveil.c
> @@ -88,6 +88,7 @@
>  #define  AMAP_CTRL_TYPE_MASK		3
>  
>  #define PAB_EXT_PEX_AMAP_SIZEN(win)	PAB_EXT_REG_ADDR(0xbef0, win)
> +#define PAB_EXT_PEX_AMAP_AXI_WIN(win)	PAB_EXT_REG_ADDR(0xb4a0, win)
>  #define PAB_PEX_AMAP_AXI_WIN(win)	PAB_REG_ADDR(0x4ba4, win)
>  #define PAB_PEX_AMAP_PEX_WIN_L(win)	PAB_REG_ADDR(0x4ba8, win)
>  #define PAB_PEX_AMAP_PEX_WIN_H(win)	PAB_REG_ADDR(0x4bac, win)
> @@ -462,7 +463,7 @@ static int mobiveil_pcie_parse_dt(struct mobiveil_pcie *pcie)
>  }
>  
>  static void program_ib_windows(struct mobiveil_pcie *pcie, int win_num,
> -			       u64 pci_addr, u32 type, u64 size)
> +			       u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
>  {
>  	u32 value;
>  	u64 size64 = ~(size - 1);
> @@ -482,7 +483,10 @@ static void program_ib_windows(struct mobiveil_pcie *pcie, int win_num,
>  	csr_writel(pcie, upper_32_bits(size64),
>  		   PAB_EXT_PEX_AMAP_SIZEN(win_num));
>  
> -	csr_writel(pcie, pci_addr, PAB_PEX_AMAP_AXI_WIN(win_num));
> +	csr_writel(pcie, lower_32_bits(cpu_addr),
> +		   PAB_PEX_AMAP_AXI_WIN(win_num));
> +	csr_writel(pcie, upper_32_bits(cpu_addr),
> +		   PAB_EXT_PEX_AMAP_AXI_WIN(win_num));
>  
>  	csr_writel(pcie, lower_32_bits(pci_addr),
>  		   PAB_PEX_AMAP_PEX_WIN_L(win_num));
> @@ -624,7 +628,7 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
>  			   CFG_WINDOW_TYPE, resource_size(pcie->ob_io_res));
>  
>  	/* memory inbound translation window */
> -	program_ib_windows(pcie, WIN_NUM_0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
> +	program_ib_windows(pcie, WIN_NUM_0, 0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
>  
>  	/* Get the I/O and memory ranges from DT */
>  	resource_list_for_each_entry(win, &pcie->resources) {
> -- 
> 2.9.5
> 

      reply	other threads:[~2019-08-21 16:59 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-13 14:11 [PATCHv7] PCI: mobiveil: Fix the CPU base address setup in inbound window Hou Zhiqiang
2019-08-21 16:59 ` Lorenzo Pieralisi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190821165922.GA3915@e121166-lin.cambridge.arm.com \
    --to=lorenzo.pieralisi@arm.com \
    --cc=Zhiqiang.Hou@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=l.subrahmanya@mobiveil.co.in \
    --cc=leoyang.li@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).