linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Srinath Mannam <srinath.mannam@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Mathias Nyman <mathias.nyman@intel.com>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	bcm-kernel-feedback-list@broadcom.com
Subject: Re: [PATCH v2 2/5] dt-bindings: phy: Modify Stingray USB PHY #phy-cells
Date: Wed, 21 Aug 2019 13:21:19 -0500	[thread overview]
Message-ID: <20190821182119.GA27408@bogus> (raw)
In-Reply-To: <1564568395-9980-3-git-send-email-srinath.mannam@broadcom.com>

On Wed, Jul 31, 2019 at 03:49:52PM +0530, Srinath Mannam wrote:
> Increase #phy-cells from 1 to 2 to have bitmask of PHY enabled ports.

And from 0 to 1...

Are you going to update all the dts files so when we convert this to 
schema we don't get a bunch of warnings? (Feel free to convert this 
to schema too).

> 
> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
> ---
>  .../devicetree/bindings/phy/brcm,stingray-usb-phy.txt      | 14 ++++++++------
>  1 file changed, 8 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt
> index 4ba2989..aeb0568 100644
> --- a/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt
> @@ -6,9 +6,11 @@ Required properties:
>  	- "brcm,sr-usb-hs-phy" is a single HS PHY.
>   - reg: offset and length of the PHY blocks registers
>   - #phy-cells:
> -   - Must be 1 for brcm,sr-usb-combo-phy as it expects one argument to indicate
> -     the PHY number of two PHYs. 0 for HS PHY and 1 for SS PHY.
> -   - Must be 0 for brcm,sr-usb-hs-phy.
> +   - Must be 2 for brcm,sr-usb-combo-phy.
> +     - Cell 1 - PHY Number, 0 for HS PHY and 1 for SS PHY.
> +     - Cell 2 - Bitmask of enabled ports connected to USB Host controller.
> +   - Must be 1 for brcm,sr-usb-hs-phy to indicate Bit mask of ports connected
> +     to USB Host controller.
>  
>  Refer to phy/phy-bindings.txt for the generic PHY binding properties
>  
> @@ -16,17 +18,17 @@ Example:
>  	usbphy0: usb-phy@0 {
>  		compatible = "brcm,sr-usb-combo-phy";
>  		reg = <0x00000000 0x100>;
> -		#phy-cells = <1>;
> +		#phy-cells = <2>;
>  	};
>  
>  	usbphy1: usb-phy@10000 {
>  		compatible = "brcm,sr-usb-combo-phy";
>  		reg = <0x00010000 0x100>,
> -		#phy-cells = <1>;
> +		#phy-cells = <2>;
>  	};
>  
>  	usbphy2: usb-phy@20000 {
>  		compatible = "brcm,sr-usb-hs-phy";
>  		reg = <0x00020000 0x100>,
> -		#phy-cells = <0>;
> +		#phy-cells = <1>;
>  	};
> -- 
> 2.7.4
> 

  reply	other threads:[~2019-08-21 18:21 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-31 10:19 [PATCH v2 0/4] Reset xHCI port PHY on disconnect Srinath Mannam
2019-07-31 10:19 ` [PATCH v2 1/5] phy: Add phy ports in attrs Srinath Mannam
2019-07-31 10:19 ` [PATCH v2 2/5] dt-bindings: phy: Modify Stingray USB PHY #phy-cells Srinath Mannam
2019-08-21 18:21   ` Rob Herring [this message]
2019-08-28  5:54     ` Srinath Mannam
2019-07-31 10:19 ` [PATCH v2 3/5] phy: sr-usb: Set phy ports Srinath Mannam
2019-07-31 10:19 ` [PATCH v2 4/5] dt-bindings: usb-xhci: Add platform specific compatible for Stingray xHCI Srinath Mannam
2019-08-21 18:22   ` Rob Herring
2019-07-31 10:19 ` [PATCH v2 5/5] drivers: xhci: Add quirk to reset xHCI port PHY Srinath Mannam
2019-09-03 14:59 ` [PATCH v2 0/4] Reset xHCI port PHY on disconnect Srinath Mannam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190821182119.GA27408@bogus \
    --to=robh@kernel.org \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mathias.nyman@intel.com \
    --cc=srinath.mannam@broadcom.com \
    --subject='Re: [PATCH v2 2/5] dt-bindings: phy: Modify Stingray USB PHY #phy-cells' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).