* [PATCH v1 0/2] add NPCM7xx EMC 10/100 Ethernet driver
@ 2019-08-01 7:26 Avi Fishman
2019-08-01 7:26 ` [PATCH v1 1/2] dt-binding: net: document NPCM7xx EMC 10/100 DT bindings Avi Fishman
2019-08-01 7:26 ` [PATCH v1 2/2] net: npcm: add NPCM7xx EMC 10/100 Ethernet driver Avi Fishman
0 siblings, 2 replies; 8+ messages in thread
From: Avi Fishman @ 2019-08-01 7:26 UTC (permalink / raw)
To: venture, yuenn, benjaminfair, davem, robh+dt, mark.rutland, gregkh
Cc: avifishman70, tmaimon77, tali.perry1, openbmc, netdev,
devicetree, linux-kernel, tglx
EMC Ethernet Media Access Controller supports 10/100 Mbps and RMII.
This driver has been working on Nuvoton BMC NPCM7xx.
Avi Fishman (2):
dt-binding: net: document NPCM7xx EMC 10/100 DT bindings
net: npcm: add NPCM7xx EMC 10/100 Ethernet driver
.../bindings/net/nuvoton,npcm7xx-emc.txt | 38 +
drivers/net/ethernet/nuvoton/Kconfig | 21 +-
drivers/net/ethernet/nuvoton/Makefile | 2 +
drivers/net/ethernet/nuvoton/npcm7xx_emc.c | 2073 +++++++++++++++++
4 files changed, 2131 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/nuvoton,npcm7xx-emc.txt
create mode 100644 drivers/net/ethernet/nuvoton/npcm7xx_emc.c
--
2.18.0
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v1 1/2] dt-binding: net: document NPCM7xx EMC 10/100 DT bindings
2019-08-01 7:26 [PATCH v1 0/2] add NPCM7xx EMC 10/100 Ethernet driver Avi Fishman
@ 2019-08-01 7:26 ` Avi Fishman
2019-08-21 18:33 ` Rob Herring
2019-08-01 7:26 ` [PATCH v1 2/2] net: npcm: add NPCM7xx EMC 10/100 Ethernet driver Avi Fishman
1 sibling, 1 reply; 8+ messages in thread
From: Avi Fishman @ 2019-08-01 7:26 UTC (permalink / raw)
To: venture, yuenn, benjaminfair, davem, robh+dt, mark.rutland, gregkh
Cc: avifishman70, tmaimon77, tali.perry1, openbmc, netdev,
devicetree, linux-kernel, tglx
Added device tree binding documentation for
Nuvoton NPCM7xx Ethernet MAC Controller (EMC) 10/100 RMII
Signed-off-by: Avi Fishman <avifishman70@gmail.com>
---
.../bindings/net/nuvoton,npcm7xx-emc.txt | 38 +++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/nuvoton,npcm7xx-emc.txt
diff --git a/Documentation/devicetree/bindings/net/nuvoton,npcm7xx-emc.txt b/Documentation/devicetree/bindings/net/nuvoton,npcm7xx-emc.txt
new file mode 100644
index 000000000000..a7ac3ca66de9
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nuvoton,npcm7xx-emc.txt
@@ -0,0 +1,38 @@
+Nuvoton NPCM7XX 10/100 Ethernet MAC Controller (EMC)
+
+The NPCM7XX provides one or two Ethernet MAC RMII Controllers
+for WAN/LAN applications
+
+Required properties:
+- device_type : Should be "network"
+- compatible : "nuvoton,npcm750-emc" for Poleg NPCM7XX.
+- reg : Offset and length of the register set for the device.
+- interrupts : Contain the emc interrupts with flags for falling edge.
+ first interrupt dedicated to Txirq
+ second interrupt dedicated to Rxirq
+- phy-mode : Should be "rmii" (see ethernet.txt in the same directory)
+- clocks : phandle of emc reference clock.
+- resets : phandle to the reset control for this device.
+- use-ncsi : Use the NC-SI stack instead of an MDIO PHY
+
+Example:
+
+emc0: eth@f0825000 {
+ device_type = "network";
+ compatible = "nuvoton,npcm750-emc";
+ reg = <0xf0825000 0x1000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ phy-mode = "rmii";
+ clocks = <&clk NPCM7XX_CLK_AHB>;
+
+ #use-ncsi; /* add this to support ncsi */
+
+ clock-names = "clk_emc";
+ resets = <&rstc 6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r1_pins
+ &r1err_pins
+ &r1md_pins>;
+ status = "okay";
+};
--
2.18.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v1 2/2] net: npcm: add NPCM7xx EMC 10/100 Ethernet driver
2019-08-01 7:26 [PATCH v1 0/2] add NPCM7xx EMC 10/100 Ethernet driver Avi Fishman
2019-08-01 7:26 ` [PATCH v1 1/2] dt-binding: net: document NPCM7xx EMC 10/100 DT bindings Avi Fishman
@ 2019-08-01 7:26 ` Avi Fishman
2019-08-01 16:27 ` David Miller
2019-08-01 17:25 ` Willem de Bruijn
1 sibling, 2 replies; 8+ messages in thread
From: Avi Fishman @ 2019-08-01 7:26 UTC (permalink / raw)
To: venture, yuenn, benjaminfair, davem, robh+dt, mark.rutland, gregkh
Cc: avifishman70, tmaimon77, tali.perry1, openbmc, netdev,
devicetree, linux-kernel, tglx
EMC Ethernet Media Access Controller supports 10/100 Mbps and
RMII.
This driver has been working on Nuvoton BMC NPCM7xx.
Signed-off-by: Avi Fishman <avifishman70@gmail.com>
---
drivers/net/ethernet/nuvoton/Kconfig | 21 +-
drivers/net/ethernet/nuvoton/Makefile | 2 +
drivers/net/ethernet/nuvoton/npcm7xx_emc.c | 2073 ++++++++++++++++++++
3 files changed, 2093 insertions(+), 3 deletions(-)
create mode 100644 drivers/net/ethernet/nuvoton/npcm7xx_emc.c
diff --git a/drivers/net/ethernet/nuvoton/Kconfig b/drivers/net/ethernet/nuvoton/Kconfig
index 325e26c549f8..3820dd3bc4b7 100644
--- a/drivers/net/ethernet/nuvoton/Kconfig
+++ b/drivers/net/ethernet/nuvoton/Kconfig
@@ -6,8 +6,8 @@
config NET_VENDOR_NUVOTON
bool "Nuvoton devices"
default y
- depends on ARM && ARCH_W90X900
- ---help---
+ depends on ARM && (ARCH_W90X900 || ARCH_NPCM7XX)
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -22,8 +22,23 @@ config W90P910_ETH
depends on ARM && ARCH_W90X900
select PHYLIB
select MII
- ---help---
+ help
Say Y here if you want to use built-in Ethernet ports
on w90p910 processor.
+config NPCM7XX_EMC_ETH
+ bool "Nuvoton NPCM7XX Ethernet EMC"
+ depends on ARM && ARCH_NPCM7XX
+ select PHYLIB
+ select MII
+ help
+ Say Y here if you want to use built-in Ethernet MAC
+ on NPCM750 MCU.
+
+config NPCM7XX_EMC_ETH_DEBUG
+ bool "Nuvoton NPCM7XX Ethernet EMC debug"
+ depends on NPCM7XX_EMC_ETH
+ help
+ Say Y here if you want debug info via /proc/driver/npcm7xx_emc.x
+
endif # NET_VENDOR_NUVOTON
diff --git a/drivers/net/ethernet/nuvoton/Makefile b/drivers/net/ethernet/nuvoton/Makefile
index 66f6e728d54b..e32be694e987 100644
--- a/drivers/net/ethernet/nuvoton/Makefile
+++ b/drivers/net/ethernet/nuvoton/Makefile
@@ -3,4 +3,6 @@
# Makefile for the Nuvoton network device drivers.
#
+#Eternet 10/100 EMC
obj-$(CONFIG_W90P910_ETH) += w90p910_ether.o
+obj-$(CONFIG_NPCM7XX_EMC_ETH) += npcm7xx_emc.o
diff --git a/drivers/net/ethernet/nuvoton/npcm7xx_emc.c b/drivers/net/ethernet/nuvoton/npcm7xx_emc.c
new file mode 100644
index 000000000000..de56c7192b76
--- /dev/null
+++ b/drivers/net/ethernet/nuvoton/npcm7xx_emc.c
@@ -0,0 +1,2073 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2014-2019 Nuvoton Technology corporation.
+
+#ifdef CONFIG_NPCM7XX_EMC_ETH_DEBUG
+#define DEBUG
+#endif
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/platform_device.h>
+#include <linux/gfp.h>
+#include <linux/kthread.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/ctype.h>
+#include <linux/debugfs.h>
+#include <linux/reset.h>
+
+#include <linux/clk.h>
+
+#include <linux/of.h>
+#include <linux/of_net.h>
+#include <linux/of_device.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#include <linux/if_ether.h>
+
+#include <net/ip.h>
+#include <net/ncsi.h>
+
+#ifdef CONFIG_DEBUG_FS
+static struct dentry *npcm7xx_fs_dir;
+#endif
+
+#define MFSEL1_OFFSET 0x00C
+#define MFSEL3_OFFSET 0x064
+#define INTCR_OFFSET 0x03C
+
+#define IPSRST1_OFFSET 0x020
+
+#define DRV_MODULE_NAME "npcm7xx-emc"
+#define DRV_MODULE_VERSION "3.90"
+
+/* Ethernet MAC Registers */
+#define REG_CAMCMR 0x00
+#define REG_CAMEN 0x04
+#define REG_CAMM_BASE 0x08
+#define REG_CAML_BASE 0x0c
+#define REG_TXDLSA 0x88
+#define REG_RXDLSA 0x8C
+#define REG_MCMDR 0x90
+#define REG_MIID 0x94
+#define REG_MIIDA 0x98
+#define REG_FFTCR 0x9C
+#define REG_TSDR 0xa0
+#define REG_RSDR 0xa4
+#define REG_DMARFC 0xa8
+#define REG_MIEN 0xac
+#define REG_MISTA 0xb0
+#define REG_MGSTA 0xb4
+#define REG_MPCNT 0xb8
+#define REG_MRPC 0xbc
+#define REG_MRPCC 0xc0
+#define REG_MREPC 0xc4
+#define REG_DMARFS 0xc8
+#define REG_CTXDSA 0xcc
+#define REG_CTXBSA 0xd0
+#define REG_CRXDSA 0xd4
+#define REG_CRXBSA 0xd8
+
+/* EMC Diagnostic Registers */
+#define REG_RXFSM 0x200
+#define REG_TXFSM 0x204
+#define REG_FSM0 0x208
+#define REG_FSM1 0x20c
+#define REG_DCR 0x210
+#define REG_DMMIR 0x214
+#define REG_BISTR 0x300
+
+/* mac controller bit */
+#define MCMDR_RXON BIT(0)
+#define MCMDR_ALP BIT(1)
+#define MCMDR_ACP BIT(3)
+#define MCMDR_SPCRC BIT(5)
+#define MCMDR_TXON BIT(8)
+#define MCMDR_NDEF BIT(9)
+#define MCMDR_FDUP BIT(18)
+#define MCMDR_ENMDC BIT(19)
+#define MCMDR_OPMOD BIT(20)
+#define SWR BIT(24)
+
+/* cam command regiser */
+#define CAMCMR_AUP BIT(0)
+#define CAMCMR_AMP BIT(1)
+#define CAMCMR_ABP BIT(2)
+#define CAMCMR_CCAM BIT(3)
+#define CAMCMR_ECMP BIT(4)
+
+/* cam enable regiser */
+#define CAM0EN BIT(0)
+
+/* mac mii controller bit */
+#define PHYAD BIT(8)
+#define PHYWR BIT(16)
+#define PHYBUSY BIT(17)
+#define PHYPRESP BIT(18)
+#define MDCON BIT(19)
+#define CAM_ENTRY_SIZE 0x08
+
+/* rx and tx status */
+#define TXDS_TXCP BIT(19)
+#define RXDS_CRCE BIT(17)
+#define RXDS_PTLE BIT(19)
+#define RXDS_RXGD BIT(20)
+#define RXDS_ALIE BIT(21)
+#define RXDS_RP BIT(22)
+
+/* mac interrupt status*/
+#define MISTA_RXINTR BIT(0)
+#define MISTA_CRCE BIT(1)
+#define MISTA_RXOV BIT(2)
+#define MISTA_PTLE BIT(3)
+#define MISTA_RXGD BIT(4)
+#define MISTA_ALIE BIT(5)
+#define MISTA_RP BIT(6)
+#define MISTA_MMP BIT(7)
+#define MISTA_DFOI BIT(8)
+#define MISTA_DENI BIT(9)
+#define MISTA_RDU BIT(10)
+#define MISTA_RXBERR BIT(11)
+#define MISTA_CFR BIT(14)
+#define MISTA_TXINTR BIT(16)
+#define MISTA_TXEMP BIT(17)
+#define MISTA_TXCP BIT(18)
+#define MISTA_EXDEF BIT(19)
+#define MISTA_NCS BIT(20)
+#define MISTA_TXABT BIT(21)
+#define MISTA_LC BIT(22)
+#define MISTA_TDU BIT(23)
+#define MISTA_TXBERR BIT(24)
+
+/* Transmit/Receive Start Demand Register */
+#define ENSTART BIT(0)
+
+#define ENRXINTR BIT(0)
+#define ENCRCE BIT(1)
+#define EMRXOV BIT(2)
+#define ENPTLE BIT(3)
+#define ENRXGD BIT(4)
+#define ENALIE BIT(5)
+#define ENRP BIT(6)
+#define ENMMP BIT(7)
+#define ENDFO BIT(8)
+#define ENDENI BIT(9)
+#define ENRDU BIT(10)
+#define ENRXBERR BIT(11)
+#define ENCFR BIT(14)
+#define ENTXINTR BIT(16)
+#define ENTXEMP BIT(17)
+#define ENTXCP BIT(18)
+#define ENTXDEF BIT(19)
+#define ENNCS BIT(20)
+#define ENTXABT BIT(21)
+#define ENLC BIT(22)
+#define ENTDU BIT(23)
+#define ENTXBERR BIT(24)
+
+/* rx and tx owner bit */
+#define RX_OWN_DMA BIT(31)
+#define TX_OWN_DMA BIT(31)
+
+/* tx frame desc controller bit */
+#define MACTXINTEN BIT(2)
+#define CRCMODE BIT(1)
+#define PADDINGMODE BIT(0)
+
+/* fftcr controller bit */
+#define RXTHD (0x03 << 0)
+#define TXTHD (0x02 << 8)
+#define BLENGTH (0x02 << 20)
+
+/* global setting for driver */
+#define RX_QUEUE_LEN 128
+#define TX_QUEUE_LEN 64
+#define MAX_RBUFF_SZ 0x600
+#define MAX_TBUFF_SZ 0x600
+#define TX_TIMEOUT 50
+#define DELAY 1000
+#define CAM0 0x0
+#define RX_POLL_SIZE 16
+
+#ifdef CONFIG_VLAN_8021Q
+#define IS_VLAN 1
+#else
+#define IS_VLAN 0
+#endif
+
+#define MAX_PACKET_SIZE (1514 + (IS_VLAN * 4))
+#define MAX_PACKET_SIZE_W_CRC (MAX_PACKET_SIZE + 4) /* 1518 */
+
+#define MHZ (1000 * 1000)
+#define MII_TIMEOUT 100
+
+struct plat_npcm7xx_emc_data {
+ char *phy_bus_name;
+ int phy_addr;
+ unsigned char mac_addr[ETH_ALEN];
+};
+
+struct npcm7xx_rxbd {
+ __le32 sl;
+ __le32 buffer;
+ __le32 reserved;
+ __le32 next;
+};
+
+struct npcm7xx_txbd {
+ __le32 mode; /* Ownership bit and some other bits */
+ __le32 buffer; /* Transmit Buffer Starting Address */
+ __le32 sl; /* Transmit Byte Count and status bits */
+ __le32 next; /* Next Tx Descriptor Starting Address */
+};
+
+struct npcm7xx_ether {
+ struct sk_buff *rx_skb[RX_QUEUE_LEN];
+ struct sk_buff *tx_skb[TX_QUEUE_LEN];
+ spinlock_t lock; /* lock sk */
+ struct npcm7xx_rxbd *rdesc;
+ struct npcm7xx_txbd *tdesc;
+ dma_addr_t rdesc_phys;
+ dma_addr_t tdesc_phys;
+ struct net_device_stats stats;
+ struct platform_device *pdev;
+ struct net_device *netdev;
+ struct resource *res;
+ unsigned int msg_enable;
+ struct mii_bus *mii_bus;
+ struct phy_device *phy_dev;
+ struct napi_struct napi;
+ struct ncsi_dev *ncsidev;
+ bool use_ncsi;
+ void __iomem *reg;
+ int rxirq;
+ int txirq;
+ unsigned int cur_tx;
+ unsigned int cur_rx;
+ unsigned int finish_tx;
+ unsigned int pending_tx;
+ __le32 start_tx_ptr;
+ __le32 start_rx_ptr;
+ unsigned int rx_berr;
+ unsigned int rx_err;
+ unsigned int rdu;
+ unsigned int rxov;
+ __le32 camcmr;
+ unsigned int rx_stuck;
+ int link;
+ int speed;
+ int duplex;
+ int need_reset;
+ char *dump_buf;
+ struct reset_control *reset;
+
+ /* Scratch page to use when rx skb alloc fails */
+ void *rx_scratch;
+ dma_addr_t rx_scratch_dma;
+
+ /* debug counters */
+ unsigned int max_waiting_rx;
+ unsigned int rx_count_pool;
+ unsigned int count_xmit;
+ unsigned int rx_int_count;
+ unsigned int rx_err_count;
+ unsigned int tx_int_count;
+ unsigned int tx_tdu;
+ unsigned int tx_tdu_i;
+ unsigned int tx_cp_i;
+ unsigned int count_finish;
+
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *dbgfs_dir;
+ struct dentry *dbgfs_status;
+ struct dentry *dbgfs_dma_cap;
+#endif
+};
+
+#if defined CONFIG_NPCM7XX_EMC_ETH_DEBUG || defined CONFIG_DEBUG_FS
+#define REG_PRINT(reg_name) {t = scnprintf(next, size, "%-10s = %08X\n", \
+ #reg_name, readl(ether->reg + (reg_name))); size -= t; next += t; }
+#define DUMP_PRINT(f, x...) {t = scnprintf(next, size, f, ## x); size -= t; \
+ next += t; }
+
+static int npcm7xx_info_dump(char *buf, int count, struct net_device *netdev)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ struct npcm7xx_txbd *txbd;
+ struct npcm7xx_rxbd *rxbd;
+ unsigned long flags;
+ unsigned int i, cur, txd_offset, rxd_offset;
+ char *next = buf;
+ unsigned int size = count;
+ int t;
+ int is_locked = spin_is_locked(ðer->lock);
+
+ if (!is_locked)
+ spin_lock_irqsave(ðer->lock, flags);
+
+ /* ------basic driver information ---- */
+ DUMP_PRINT("NPCM7XX EMC %s driver version: %s\n", netdev->name,
+ DRV_MODULE_VERSION);
+
+ REG_PRINT(REG_CAMCMR);
+ REG_PRINT(REG_CAMEN);
+ REG_PRINT(REG_CAMM_BASE);
+ REG_PRINT(REG_CAML_BASE);
+ REG_PRINT(REG_TXDLSA);
+ REG_PRINT(REG_RXDLSA);
+ REG_PRINT(REG_MCMDR);
+ REG_PRINT(REG_MIID);
+ REG_PRINT(REG_MIIDA);
+ REG_PRINT(REG_FFTCR);
+ REG_PRINT(REG_TSDR);
+ REG_PRINT(REG_RSDR);
+ REG_PRINT(REG_DMARFC);
+ REG_PRINT(REG_MIEN);
+ REG_PRINT(REG_MISTA);
+ REG_PRINT(REG_MGSTA);
+ REG_PRINT(REG_MPCNT);
+ writel(0x7FFF, (ether->reg + REG_MPCNT));
+ REG_PRINT(REG_MRPC);
+ REG_PRINT(REG_MRPCC);
+ REG_PRINT(REG_MREPC);
+ REG_PRINT(REG_DMARFS);
+ REG_PRINT(REG_CTXDSA);
+ REG_PRINT(REG_CTXBSA);
+ REG_PRINT(REG_CRXDSA);
+ REG_PRINT(REG_CRXBSA);
+ REG_PRINT(REG_RXFSM);
+ REG_PRINT(REG_TXFSM);
+ REG_PRINT(REG_FSM0);
+ REG_PRINT(REG_FSM1);
+ REG_PRINT(REG_DCR);
+ REG_PRINT(REG_DMMIR);
+ REG_PRINT(REG_BISTR);
+ DUMP_PRINT("\n");
+
+ DUMP_PRINT("netif_queue %s\n\n", netif_queue_stopped(netdev) ?
+ "Stopped" : "Running");
+ if (ether->rdesc)
+ DUMP_PRINT("napi is %s\n\n", test_bit(NAPI_STATE_SCHED,
+ ðer->napi.state) ?
+ "scheduled" :
+ "not scheduled");
+
+ txd_offset = (readl((ether->reg + REG_CTXDSA)) -
+ readl((ether->reg + REG_TXDLSA))) /
+ sizeof(struct npcm7xx_txbd);
+ DUMP_PRINT("TXD offset %6d\n", txd_offset);
+ DUMP_PRINT("cur_tx %6d\n", ether->cur_tx);
+ DUMP_PRINT("finish_tx %6d\n", ether->finish_tx);
+ DUMP_PRINT("pending_tx %6d\n", ether->pending_tx);
+ /* debug counters */
+ DUMP_PRINT("tx_tdu %6d\n", ether->tx_tdu);
+ ether->tx_tdu = 0;
+ DUMP_PRINT("tx_tdu_i %6d\n", ether->tx_tdu_i);
+ ether->tx_tdu_i = 0;
+ DUMP_PRINT("tx_cp_i %6d\n", ether->tx_cp_i);
+ ether->tx_cp_i = 0;
+ DUMP_PRINT("tx_int_count %6d\n", ether->tx_int_count);
+ ether->tx_int_count = 0;
+ DUMP_PRINT("count_xmit tx %6d\n", ether->count_xmit);
+ ether->count_xmit = 0;
+ DUMP_PRINT("count_finish %6d\n", ether->count_finish);
+ ether->count_finish = 0;
+ DUMP_PRINT("\n");
+
+ rxd_offset = (readl((ether->reg + REG_CRXDSA)) -
+ readl((ether->reg + REG_RXDLSA)))
+ / sizeof(struct npcm7xx_txbd);
+ DUMP_PRINT("RXD offset %6d\n", rxd_offset);
+ DUMP_PRINT("cur_rx %6d\n", ether->cur_rx);
+ DUMP_PRINT("rx_err %6d\n", ether->rx_err);
+ ether->rx_err = 0;
+ DUMP_PRINT("rx_berr %6d\n", ether->rx_berr);
+ ether->rx_berr = 0;
+ DUMP_PRINT("rx_stuck %6d\n", ether->rx_stuck);
+ ether->rx_stuck = 0;
+ DUMP_PRINT("rdu %6d\n", ether->rdu);
+ ether->rdu = 0;
+ DUMP_PRINT("rxov rx %6d\n", ether->rxov);
+ ether->rxov = 0;
+ /* debug counters */
+ DUMP_PRINT("rx_int_count %6d\n", ether->rx_int_count);
+ ether->rx_int_count = 0;
+ DUMP_PRINT("rx_err_count %6d\n", ether->rx_err_count);
+ ether->rx_err_count = 0;
+ DUMP_PRINT("rx_count_pool %6d\n", ether->rx_count_pool);
+ ether->rx_count_pool = 0;
+ DUMP_PRINT("max_waiting_rx %5d\n", ether->max_waiting_rx);
+ ether->max_waiting_rx = 0;
+ DUMP_PRINT("\n");
+ DUMP_PRINT("need_reset %5d\n", ether->need_reset);
+
+ if (ether->tdesc && ether->rdesc) {
+ cur = ether->finish_tx - 2;
+ for (i = 0; i < 3; i++) {
+ cur = (cur + 1) % TX_QUEUE_LEN;
+ txbd = (ether->tdesc + cur);
+ DUMP_PRINT("finish %3d txbd mode %08X buffer %08X sl %08X next %08X tx_skb %p\n",
+ cur, txbd->mode, txbd->buffer,
+ txbd->sl, txbd->next, ether->tx_skb[cur]);
+ }
+ DUMP_PRINT("\n");
+
+ cur = txd_offset - 2;
+ for (i = 0; i < 3; i++) {
+ cur = (cur + 1) % TX_QUEUE_LEN;
+ txbd = (ether->tdesc + cur);
+ DUMP_PRINT("txd_of %3d txbd mode %08X buffer %08X sl %08X next %08X\n",
+ cur, txbd->mode, txbd->buffer,
+ txbd->sl, txbd->next);
+ }
+ DUMP_PRINT("\n");
+
+ cur = ether->cur_tx - 63;
+ for (i = 0; i < 64; i++) {
+ cur = (cur + 1) % TX_QUEUE_LEN;
+ txbd = (ether->tdesc + cur);
+ DUMP_PRINT("cur_tx %3d txbd mode %08X buffer %08X sl %08X next %08X\n",
+ cur, txbd->mode, txbd->buffer,
+ txbd->sl, txbd->next);
+ }
+ DUMP_PRINT("\n");
+
+ cur = ether->cur_rx - 63;
+ for (i = 0; i < 64; i++) {
+ cur = (cur + 1) % RX_QUEUE_LEN;
+ rxbd = (ether->rdesc + cur);
+ DUMP_PRINT("cur_rx %3d rxbd sl %08X buffer %08X sl %08X next %08X\n",
+ cur, rxbd->sl, rxbd->buffer,
+ rxbd->reserved, rxbd->next);
+ }
+ DUMP_PRINT("\n");
+
+ cur = rxd_offset - 2;
+ for (i = 0; i < 3; i++) {
+ cur = (cur + 1) % RX_QUEUE_LEN;
+ rxbd = (ether->rdesc + cur);
+ DUMP_PRINT("rxd_of %3d rxbd sl %08X buffer %08X sl %08X next %08X\n",
+ cur, rxbd->sl, rxbd->buffer,
+ rxbd->reserved, rxbd->next);
+ }
+ DUMP_PRINT("\n");
+ }
+
+ if (!is_locked)
+ spin_unlock_irqrestore(ðer->lock, flags);
+
+ return count - size;
+}
+#endif
+
+#ifdef CONFIG_NPCM7XX_EMC_ETH_DEBUG
+static void npcm7xx_info_print(struct net_device *netdev)
+{
+ char *emc_dump_buf;
+ int count;
+ struct npcm7xx_ether *ether;
+ struct platform_device *pdev;
+ char c;
+ char *tmp_buf;
+ const size_t print_size = 5 * PAGE_SIZE;
+
+ ether = netdev_priv(netdev);
+ pdev = ether->pdev;
+
+ emc_dump_buf = kmalloc(print_size, GFP_KERNEL);
+ if (!emc_dump_buf)
+ return;
+
+ tmp_buf = emc_dump_buf;
+ count = npcm7xx_info_dump(emc_dump_buf, print_size, netdev);
+ while (count > 512) {
+ c = tmp_buf[512];
+ tmp_buf[512] = 0;
+ dev_info(&pdev->dev, "%s", tmp_buf);
+ tmp_buf += 512;
+ tmp_buf[0] = c;
+ count -= 512;
+
+ dev_info(&pdev->dev, "%s", tmp_buf);
+ kfree(emc_dump_buf);
+}
+#endif
+
+#ifdef CONFIG_DEBUG_FS
+#include <linux/seq_file.h>
+
+static int npcm7xx_debug_show(struct seq_file *sf, void *v)
+{
+ struct net_device *netdev = (struct net_device *)sf->private;
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ const size_t print_size = 5 * PAGE_SIZE;
+
+ if (!ether->dump_buf) {
+ ether->dump_buf = kmalloc(print_size, GFP_KERNEL);
+ if (!ether->dump_buf)
+ return -1;
+ npcm7xx_info_dump(ether->dump_buf, print_size, netdev);
+ }
+
+ seq_printf(sf, "%s", ether->dump_buf);
+ if (sf->count < sf->size) {
+ kfree(ether->dump_buf);
+ ether->dump_buf = NULL;
+ }
+
+ return 0;
+}
+
+static int npcm7xx_debug_show_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, npcm7xx_debug_show, inode->i_private);
+}
+
+static const struct file_operations npcm7xx_debug_show_fops = {
+ .open = npcm7xx_debug_show_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int npcm7xx_debug_reset(struct seq_file *sf, void *v)
+{
+ struct net_device *netdev = (struct net_device *)sf->private;
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ unsigned long flags;
+
+ seq_puts(sf, "Ask to reset the module\n");
+ spin_lock_irqsave(ðer->lock, flags);
+ writel(0, (ether->reg + REG_MIEN));
+ spin_unlock_irqrestore(ðer->lock, flags);
+ ether->need_reset = 1;
+ napi_schedule(ðer->napi);
+
+ return 0;
+}
+
+static int npcm7xx_debug_reset_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, npcm7xx_debug_reset, inode->i_private);
+}
+
+static const struct file_operations npcm7xx_debug_reset_fops = {
+ .owner = THIS_MODULE,
+ .open = npcm7xx_debug_reset_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int npcm7xx_debug_fs(struct npcm7xx_ether *ether)
+{
+ /* Create debugfs main directory if it doesn't exist yet */
+ if (!npcm7xx_fs_dir) {
+ npcm7xx_fs_dir = debugfs_create_dir(DRV_MODULE_NAME, NULL);
+
+ if (!npcm7xx_fs_dir || IS_ERR(npcm7xx_fs_dir)) {
+ dev_err(ðer->pdev->dev,
+ "ERROR %s, debugfs create directory failed\n",
+ DRV_MODULE_NAME);
+ return -ENOMEM;
+ }
+ }
+
+ /* Create per netdev entries */
+ ether->dbgfs_dir = debugfs_create_dir(ether->netdev->name,
+ npcm7xx_fs_dir);
+ if (!ether->dbgfs_dir || IS_ERR(ether->dbgfs_dir)) {
+ dev_err(ðer->pdev->dev,
+ "ERROR failed to create %s directory\n",
+ ether->netdev->name);
+ return -ENOMEM;
+ }
+
+ /* Entry to report DMA RX/TX rings */
+ ether->dbgfs_status =
+ debugfs_create_file("status", 0444,
+ ether->dbgfs_dir, ether->netdev,
+ &npcm7xx_debug_show_fops);
+
+ if (!ether->dbgfs_status || IS_ERR(ether->dbgfs_status)) {
+ dev_err(ðer->pdev->dev,
+ "ERROR creating \'status\' debugfs file\n");
+ debugfs_remove_recursive(ether->dbgfs_dir);
+
+ return -ENOMEM;
+ }
+
+ /* Entry to report the DMA HW features */
+ ether->dbgfs_dma_cap = debugfs_create_file("do_reset", 0444,
+ ether->dbgfs_dir,
+ ether->netdev,
+ &npcm7xx_debug_reset_fops);
+
+ if (!ether->dbgfs_dma_cap || IS_ERR(ether->dbgfs_dma_cap)) {
+ dev_err(ðer->pdev->dev,
+ "ERROR creating stmmac \'do_reset\' debugfs file\n");
+ debugfs_remove_recursive(ether->dbgfs_dir);
+
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+#endif
+
+static void npcm7xx_opmode(struct net_device *netdev, int speed, int duplex)
+{
+ __le32 val;
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+
+ val = readl((ether->reg + REG_MCMDR));
+ if (speed == 100)
+ val |= MCMDR_OPMOD;
+ else
+ val &= ~MCMDR_OPMOD;
+
+ if (duplex == DUPLEX_FULL)
+ val |= MCMDR_FDUP;
+ else
+ val &= ~MCMDR_FDUP;
+
+ writel(val, (ether->reg + REG_MCMDR));
+}
+
+static void adjust_link(struct net_device *netdev)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ struct phy_device *phydev = ether->phy_dev;
+ bool status_change = false;
+
+ if (phydev->link) {
+ if (ether->speed != phydev->speed ||
+ ether->duplex != phydev->duplex) {
+ ether->speed = phydev->speed;
+ ether->duplex = phydev->duplex;
+ status_change = true;
+ }
+ } else {
+ ether->speed = 0;
+ ether->duplex = -1;
+ }
+
+ if (phydev->link != ether->link) {
+ ether->link = phydev->link;
+ status_change = true;
+ }
+
+ if (status_change)
+ npcm7xx_opmode(netdev, ether->speed, ether->duplex);
+}
+
+static void npcm7xx_write_cam(struct net_device *netdev,
+ unsigned int x, unsigned char *pval)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ __le32 msw, lsw;
+
+ msw = (pval[0] << 24) | (pval[1] << 16) | (pval[2] << 8) | pval[3];
+
+ lsw = (pval[4] << 24) | (pval[5] << 16);
+
+ writel(lsw, (ether->reg + REG_CAML_BASE) + x * CAM_ENTRY_SIZE);
+ writel(msw, (ether->reg + REG_CAMM_BASE) + x * CAM_ENTRY_SIZE);
+ dev_dbg(ðer->pdev->dev,
+ "REG_CAML_BASE = 0x%08X REG_CAMM_BASE = 0x%08X", lsw, msw);
+}
+
+static struct sk_buff *get_new_skb(struct net_device *netdev, u32 i)
+{
+ __le32 buffer;
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ struct sk_buff *skb = netdev_alloc_skb(netdev,
+ roundup(MAX_PACKET_SIZE_W_CRC, 4));
+
+ if (unlikely(!skb)) {
+ if (net_ratelimit())
+ netdev_warn(netdev, "failed to allocate rx skb\n");
+ buffer = ether->rx_scratch_dma;
+ } else {
+ /* Do not unmark the following skb_reserve() Receive Buffer
+ * Starting Address must be aligned to 4 bytes and the following
+ * line if unmarked will make it align to 2 and this likely will
+ * hult the RX and crash the linux
+ * skb_reserve(skb, NET_IP_ALIGN);
+ */
+ skb->dev = netdev;
+ buffer = dma_map_single(&netdev->dev,
+ skb->data,
+ roundup(MAX_PACKET_SIZE_W_CRC, 4),
+ DMA_FROM_DEVICE);
+ if (unlikely(dma_mapping_error(&netdev->dev, buffer))) {
+ if (net_ratelimit())
+ netdev_err(netdev, "failed to map rx page\n");
+ dev_kfree_skb_any(skb);
+ buffer = ether->rx_scratch_dma;
+ skb = NULL;
+ }
+ }
+ ether->rx_skb[i] = skb;
+ ether->rdesc[i].buffer = buffer;
+
+ return skb;
+}
+
+/* This API must call with Tx/Rx stopped */
+static void npcm7xx_free_desc(struct net_device *netdev,
+ bool free_also_descriptors)
+{
+ struct sk_buff *skb;
+ u32 i;
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ struct platform_device *pdev = ether->pdev;
+
+ for (i = 0; i < TX_QUEUE_LEN; i++) {
+ skb = ether->tx_skb[i];
+ if (skb) {
+ dma_unmap_single(&netdev->dev,
+ (dma_addr_t)(ether->tdesc[i].buffer),
+ skb->len, DMA_TO_DEVICE);
+ dev_kfree_skb_any(skb);
+ ether->tx_skb[i] = NULL;
+ }
+ }
+
+ for (i = 0; i < RX_QUEUE_LEN; i++) {
+ skb = ether->rx_skb[i];
+ if (skb) {
+ dma_unmap_single(&netdev->dev,
+ (dma_addr_t)(ether->rdesc[i].buffer),
+ roundup(MAX_PACKET_SIZE_W_CRC, 4),
+ DMA_FROM_DEVICE);
+ dev_kfree_skb_any(skb);
+ ether->rx_skb[i] = NULL;
+ }
+ }
+
+ if (free_also_descriptors) {
+ if (ether->tdesc)
+ dma_free_coherent(&pdev->dev,
+ sizeof(struct npcm7xx_txbd) *
+ TX_QUEUE_LEN,
+ ether->tdesc, ether->tdesc_phys);
+ ether->tdesc = NULL;
+
+ if (ether->rdesc)
+ dma_free_coherent(&pdev->dev,
+ sizeof(struct npcm7xx_rxbd) *
+ RX_QUEUE_LEN,
+ ether->rdesc, ether->rdesc_phys);
+ ether->rdesc = NULL;
+
+ /* Free scratch packet buffer */
+ if (ether->rx_scratch)
+ dma_free_coherent(&pdev->dev,
+ roundup(MAX_PACKET_SIZE_W_CRC, 4),
+ ether->rx_scratch,
+ ether->rx_scratch_dma);
+ ether->rx_scratch = NULL;
+ }
+}
+
+static int npcm7xx_init_desc(struct net_device *netdev)
+{
+ struct npcm7xx_ether *ether;
+ struct npcm7xx_txbd *tdesc;
+ struct npcm7xx_rxbd *rdesc;
+ struct platform_device *pdev;
+ unsigned int i;
+
+ ether = netdev_priv(netdev);
+ pdev = ether->pdev;
+
+ if (!ether->tdesc) {
+ ether->tdesc = (struct npcm7xx_txbd *)
+ dma_alloc_coherent(&pdev->dev,
+ sizeof(struct npcm7xx_txbd) *
+ TX_QUEUE_LEN,
+ ðer->tdesc_phys,
+ GFP_KERNEL);
+
+ if (!ether->tdesc) {
+ dev_err(&pdev->dev,
+ "Failed to allocate memory for tx desc\n");
+ npcm7xx_free_desc(netdev, true);
+ return -ENOMEM;
+ }
+ }
+
+ if (!ether->rdesc) {
+ ether->rdesc = (struct npcm7xx_rxbd *)
+ dma_alloc_coherent(&pdev->dev,
+ sizeof(struct npcm7xx_rxbd) *
+ RX_QUEUE_LEN,
+ ðer->rdesc_phys,
+ GFP_KERNEL);
+
+ if (!ether->rdesc) {
+ dev_err(&pdev->dev,
+ "Failed to allocate memory for rx desc\n");
+ npcm7xx_free_desc(netdev, true);
+ return -ENOMEM;
+ }
+ }
+
+ for (i = 0; i < TX_QUEUE_LEN; i++) {
+ unsigned int offset;
+
+ tdesc = (ether->tdesc + i);
+
+ if (i == TX_QUEUE_LEN - 1)
+ offset = 0;
+ else
+ offset = sizeof(struct npcm7xx_txbd) * (i + 1);
+
+ tdesc->next = ether->tdesc_phys + offset;
+ tdesc->buffer = (__le32)NULL;
+ tdesc->sl = 0;
+ tdesc->mode = 0;
+ }
+
+ ether->start_tx_ptr = ether->tdesc_phys;
+
+ /* Allocate scratch packet buffer */
+ if (!ether->rx_scratch) {
+ ether->rx_scratch =
+ dma_alloc_coherent(&pdev->dev,
+ roundup(MAX_PACKET_SIZE_W_CRC, 4),
+ ðer->rx_scratch_dma, GFP_KERNEL);
+ if (!ether->rx_scratch) {
+ dev_err(&pdev->dev,
+ "Failed to allocate memory for rx_scratch\n");
+ npcm7xx_free_desc(netdev, true);
+ return -ENOMEM;
+ }
+ }
+
+ for (i = 0; i < RX_QUEUE_LEN; i++) {
+ unsigned int offset;
+
+ rdesc = (ether->rdesc + i);
+
+ if (i == RX_QUEUE_LEN - 1)
+ offset = 0;
+ else
+ offset = sizeof(struct npcm7xx_rxbd) * (i + 1);
+
+ rdesc->next = ether->rdesc_phys + offset;
+ rdesc->sl = RX_OWN_DMA;
+
+ if (!get_new_skb(netdev, i)) {
+ dev_err(&pdev->dev, "get_new_skb() failed\n");
+ npcm7xx_free_desc(netdev, true);
+ return -ENOMEM;
+ }
+ }
+
+ ether->start_rx_ptr = ether->rdesc_phys;
+ for (i = 0; i < TX_QUEUE_LEN; i++)
+ ether->tx_skb[i] = NULL;
+
+ return 0;
+}
+
+static void npcm7xx_set_fifo_threshold(struct net_device *netdev)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ __le32 val;
+
+ val = RXTHD | TXTHD | BLENGTH;
+ writel(val, (ether->reg + REG_FFTCR));
+}
+
+static void npcm7xx_return_default_idle(struct net_device *netdev)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ __le32 val;
+ __le32 saved_bits;
+
+ val = readl((ether->reg + REG_MCMDR));
+ saved_bits = val & (MCMDR_FDUP | MCMDR_OPMOD);
+ val |= SWR;
+ writel(val, (ether->reg + REG_MCMDR));
+
+ /* During the EMC reset the AHB will read 0 from all registers,
+ * so in order to see if the reset finished we can't count on
+ * (ether->reg + REG_MCMDR).SWR to become 0, instead we read another
+ * register that its reset value is not 0,
+ * we choose (ether->reg + REG_FFTCR).
+ */
+ do {
+ val = readl((ether->reg + REG_FFTCR));
+ } while (val == 0);
+
+ /* Now we can verify if (ether->reg + REG_MCMDR).SWR became
+ * 0 (probably it will be 0 on the first read).
+ */
+ do {
+ val = readl((ether->reg + REG_MCMDR));
+ } while (val & SWR);
+
+ /* restore values */
+ writel(saved_bits, (ether->reg + REG_MCMDR));
+}
+
+static void npcm7xx_enable_mac_interrupt(struct net_device *netdev)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ __le32 val;
+
+ val = ENRXINTR | /* Start of RX interrupts */
+ ENCRCE |
+ EMRXOV |
+ (ENPTLE * !IS_VLAN) | /* If we don't support VLAN we want interrupt on long packets */
+ ENRXGD |
+ ENALIE |
+ ENRP |
+ ENMMP |
+ ENDFO |
+ /* ENDENI | */ /* We don't need interrupt on DMA Early Notification */
+ ENRDU | /* We don't need interrupt on Receive Descriptor Unavailable Interrupt */
+ ENRXBERR |
+ /* ENCFR | */
+ ENTXINTR | /* Start of TX interrupts */
+ ENTXEMP |
+ ENTXCP |
+ ENTXDEF |
+ ENNCS |
+ ENTXABT |
+ ENLC |
+ /* ENTDU | */ /* We don't need interrupt on Transmit Descriptor Unavailable at start of operation */
+ ENTXBERR;
+ writel(val, (ether->reg + REG_MIEN));
+}
+
+static void npcm7xx_get_and_clear_int(struct net_device *netdev,
+ __le32 *val, __le32 mask)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+
+ *val = readl((ether->reg + REG_MISTA)) & mask;
+ writel(*val, (ether->reg + REG_MISTA));
+}
+
+static void npcm7xx_set_global_maccmd(struct net_device *netdev)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ __le32 val;
+
+ val = readl((ether->reg + REG_MCMDR));
+
+ val |= MCMDR_SPCRC | MCMDR_ENMDC | MCMDR_ACP | MCMDR_NDEF;
+ if (IS_VLAN) {
+ /* we set ALP accept long packets since VLAN packets
+ * are 4 bytes longer than 1518
+ */
+ val |= MCMDR_ALP;
+ /* limit receive length to 1522 bytes due to VLAN */
+ writel(MAX_PACKET_SIZE_W_CRC, (ether->reg + REG_DMARFC));
+ }
+ writel(val, (ether->reg + REG_MCMDR));
+}
+
+static void npcm7xx_enable_cam(struct net_device *netdev)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ __le32 val;
+
+ npcm7xx_write_cam(netdev, CAM0, netdev->dev_addr);
+
+ val = readl((ether->reg + REG_CAMEN));
+ val |= CAM0EN;
+ writel(val, (ether->reg + REG_CAMEN));
+}
+
+static void npcm7xx_set_curdest(struct net_device *netdev)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+
+ writel(ether->start_rx_ptr, (ether->reg + REG_RXDLSA));
+ writel(ether->start_tx_ptr, (ether->reg + REG_TXDLSA));
+}
+
+static void npcm7xx_ether_set_rx_mode(struct net_device *netdev)
+{
+ struct npcm7xx_ether *ether;
+ __le32 rx_mode;
+
+ ether = netdev_priv(netdev);
+
+ dev_dbg(ðer->pdev->dev, "%s CAMCMR_AUP\n",
+ (netdev->flags & IFF_PROMISC) ? "Set" : "Clear");
+ if (netdev->flags & IFF_PROMISC)
+ rx_mode = CAMCMR_AUP | CAMCMR_AMP | CAMCMR_ABP | CAMCMR_ECMP;
+ else if ((netdev->flags & IFF_ALLMULTI) || !netdev_mc_empty(netdev))
+ rx_mode = CAMCMR_AMP | CAMCMR_ABP | CAMCMR_ECMP;
+ else
+ rx_mode = CAMCMR_ECMP | CAMCMR_ABP;
+ writel(rx_mode, (ether->reg + REG_CAMCMR));
+ ether->camcmr = rx_mode;
+}
+
+static void npcm7xx_reset_mac(struct net_device *netdev, int need_free)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+
+ netif_tx_lock(netdev);
+
+ /* disable RX and TX */
+ writel(readl((ether->reg + REG_MCMDR)) & ~(MCMDR_TXON | MCMDR_RXON),
+ (ether->reg + REG_MCMDR));
+
+ npcm7xx_return_default_idle(netdev);
+ npcm7xx_set_fifo_threshold(netdev);
+
+ if (need_free)
+ npcm7xx_free_desc(netdev, false);
+
+ npcm7xx_init_desc(netdev);
+
+ ether->cur_tx = 0x0;
+ ether->finish_tx = 0x0;
+ ether->pending_tx = 0x0;
+ ether->cur_rx = 0x0;
+ ether->tx_tdu = 0;
+ ether->tx_tdu_i = 0;
+ ether->tx_cp_i = 0;
+
+ npcm7xx_set_curdest(netdev);
+ npcm7xx_enable_cam(netdev);
+ npcm7xx_ether_set_rx_mode(netdev);
+ npcm7xx_enable_mac_interrupt(netdev);
+ npcm7xx_set_global_maccmd(netdev);
+
+ /* enable RX and TX */
+ writel(readl((ether->reg + REG_MCMDR)) | MCMDR_TXON | MCMDR_RXON,
+ (ether->reg + REG_MCMDR));
+
+ /* trigger RX */
+ writel(ENSTART, (ether->reg + REG_RSDR));
+
+ ether->need_reset = 0;
+
+ netif_wake_queue(netdev);
+ netif_tx_unlock(netdev);
+}
+
+static int npcm7xx_mdio_write(struct mii_bus *bus, int phy_id, int regnum,
+ u16 value)
+{
+ struct npcm7xx_ether *ether = bus->priv;
+ unsigned long timeout = jiffies + msecs_to_jiffies(MII_TIMEOUT * 100);
+
+ writel(value, (ether->reg + REG_MIID));
+ writel((phy_id << 0x08) | regnum | PHYBUSY | PHYWR,
+ (ether->reg + REG_MIIDA));
+
+ /* Wait for completion */
+ while (readl((ether->reg + REG_MIIDA)) & PHYBUSY) {
+ if (time_after(jiffies, timeout)) {
+ dev_dbg(ðer->pdev->dev,
+ "mdio read timed out\n ether->reg = 0x%x phy_id=0x%x REG_MIIDA=0x%x\n",
+ (unsigned int)ether->reg, phy_id,
+ readl((ether->reg + REG_MIIDA)));
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ }
+
+ return 0;
+}
+
+static int npcm7xx_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
+{
+ struct npcm7xx_ether *ether = bus->priv;
+ unsigned long timeout = jiffies + msecs_to_jiffies(MII_TIMEOUT * 100);
+
+ writel((phy_id << 0x08) | regnum | PHYBUSY, (ether->reg + REG_MIIDA));
+
+ /* Wait for completion */
+ while (readl((ether->reg + REG_MIIDA)) & PHYBUSY) {
+ if (time_after(jiffies, timeout)) {
+ dev_dbg(ðer->pdev->dev,
+ "mdio read timed out\n ether->reg = 0x%x phy_id=0x%x REG_MIIDA=0x%x\n",
+ (unsigned int)ether->reg, phy_id
+ , readl((ether->reg + REG_MIIDA)));
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ }
+
+ return readl((ether->reg + REG_MIID));
+}
+
+static int npcm7xx_mdio_reset(struct mii_bus *bus)
+{
+ /* reset EMAC engine?? */
+ return 0;
+}
+
+static int npcm7xx_set_mac_address(struct net_device *netdev, void *addr)
+{
+ struct sockaddr *address = addr;
+
+ if (!is_valid_ether_addr((u8 *)address->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, address->sa_data, netdev->addr_len);
+ npcm7xx_write_cam(netdev, CAM0, netdev->dev_addr);
+
+ return 0;
+}
+
+static int npcm7xx_ether_close(struct net_device *netdev)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+
+ npcm7xx_return_default_idle(netdev);
+
+ if (ether->phy_dev)
+ phy_stop(ether->phy_dev);
+ else if (ether->use_ncsi)
+ ncsi_stop_dev(ether->ncsidev);
+
+ msleep(20);
+
+ free_irq(ether->txirq, netdev);
+ free_irq(ether->rxirq, netdev);
+
+ netif_stop_queue(netdev);
+ napi_disable(ðer->napi);
+
+ npcm7xx_free_desc(netdev, true);
+
+ kfree(ether->dump_buf);
+ ether->dump_buf = NULL;
+
+ return 0;
+}
+
+static struct net_device_stats *npcm7xx_ether_stats(struct net_device *netdev)
+{
+ struct npcm7xx_ether *ether;
+
+ ether = netdev_priv(netdev);
+ return ðer->stats;
+}
+
+static int npcm7xx_clean_tx(struct net_device *netdev, bool from_xmit)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ struct npcm7xx_txbd *txbd;
+ struct sk_buff *s;
+ dma_addr_t cur_entry, entry;
+ __le32 sl;
+
+ if (ether->pending_tx == 0)
+ return (0);
+
+ cur_entry = readl((ether->reg + REG_CTXDSA));
+
+ /* Release old used buffers */
+ entry = ether->tdesc_phys + sizeof(struct npcm7xx_txbd) *
+ (ether->finish_tx);
+
+ while (entry != cur_entry) {
+ txbd = (ether->tdesc + ether->finish_tx);
+ s = ether->tx_skb[ether->finish_tx];
+ if (!s)
+ break;
+
+ ether->count_finish++;
+
+ dma_unmap_single(&netdev->dev, txbd->buffer, s->len,
+ DMA_TO_DEVICE);
+ consume_skb(s);
+ ether->tx_skb[ether->finish_tx] = NULL;
+
+ if (++ether->finish_tx >= TX_QUEUE_LEN)
+ ether->finish_tx = 0;
+ ether->pending_tx--;
+
+ sl = txbd->sl;
+ if (sl & TXDS_TXCP) {
+ ether->stats.tx_packets++;
+ ether->stats.tx_bytes += (sl & 0xFFFF);
+ } else {
+ ether->stats.tx_errors++;
+ }
+
+ entry = ether->tdesc_phys + sizeof(struct npcm7xx_txbd) *
+ (ether->finish_tx);
+ }
+
+ if (!from_xmit && unlikely(netif_queue_stopped(netdev) &&
+ (TX_QUEUE_LEN - ether->pending_tx) > 1)) {
+ netif_tx_lock(netdev);
+ if (netif_queue_stopped(netdev) &&
+ (TX_QUEUE_LEN - ether->pending_tx) > 1) {
+ netif_wake_queue(netdev);
+ }
+ netif_tx_unlock(netdev);
+ }
+
+ return(0);
+}
+
+static int npcm7xx_ether_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ struct npcm7xx_txbd *txbd;
+ unsigned long flags;
+
+ ether->count_xmit++;
+
+ /* Insert new buffer */
+ txbd = (ether->tdesc + ether->cur_tx);
+ txbd->buffer = dma_map_single(&netdev->dev, skb->data, skb->len,
+ DMA_TO_DEVICE);
+ ether->tx_skb[ether->cur_tx] = skb;
+ if (skb->len > MAX_PACKET_SIZE)
+ dev_err(ðer->pdev->dev,
+ "skb->len (= %d) > MAX_PACKET_SIZE (= %d)\n",
+ skb->len, MAX_PACKET_SIZE);
+
+ txbd->sl = skb->len > MAX_PACKET_SIZE ? MAX_PACKET_SIZE : skb->len;
+ dma_wmb();
+
+ txbd->mode = TX_OWN_DMA | PADDINGMODE | CRCMODE;
+
+ /* make sure that data is in memory before we trigger TX */
+ wmb();
+
+ /* trigger TX */
+ writel(ENSTART, (ether->reg + REG_TSDR));
+
+ if (++ether->cur_tx >= TX_QUEUE_LEN)
+ ether->cur_tx = 0;
+
+ spin_lock_irqsave(ðer->lock, flags);
+ ether->pending_tx++;
+
+ /* sometimes we miss the tx interrupt due to HW issue, so NAPI will not
+ * clean the pending tx, so we clean it also here
+ */
+ npcm7xx_clean_tx(netdev, true);
+
+ if (ether->pending_tx >= TX_QUEUE_LEN - 1) {
+ __le32 reg_mien;
+ unsigned int index_to_wake = ether->cur_tx +
+ ((TX_QUEUE_LEN * 3) / 4);
+
+ if (index_to_wake >= TX_QUEUE_LEN)
+ index_to_wake -= TX_QUEUE_LEN;
+
+ txbd = (ether->tdesc + index_to_wake);
+ txbd->mode = TX_OWN_DMA | PADDINGMODE | CRCMODE | MACTXINTEN;
+
+ /* make sure that data is in memory before we trigger TX */
+ wmb();
+
+ /* Clear TDU interrupt */
+ writel(MISTA_TDU, (ether->reg + REG_MISTA));
+
+ /* due to HW issue somtimes, we miss the TX interrupt we just
+ * set (MACTXINTEN), so we also set TDU for Transmit
+ * Descriptor Unavailable interrupt
+ */
+ reg_mien = readl((ether->reg + REG_MIEN));
+ if (reg_mien != 0)
+ /* Enable TDU interrupt */
+ writel(reg_mien | ENTDU, (ether->reg + REG_MIEN));
+
+ ether->tx_tdu++;
+ netif_stop_queue(netdev);
+ }
+
+ spin_unlock_irqrestore(ðer->lock, flags);
+
+ return 0;
+}
+
+static irqreturn_t npcm7xx_tx_interrupt(int irq, void *dev_id)
+{
+ struct npcm7xx_ether *ether;
+ struct platform_device *pdev;
+ struct net_device *netdev;
+ __le32 status;
+ unsigned long flags;
+
+ netdev = dev_id;
+ ether = netdev_priv(netdev);
+ pdev = ether->pdev;
+
+ npcm7xx_get_and_clear_int(netdev, &status, 0xFFFF0000);
+
+ ether->tx_int_count++;
+
+ if (status & MISTA_EXDEF)
+ dev_err(&pdev->dev, "emc defer exceed interrupt status=0x%08X\n"
+ , status);
+ else if (status & MISTA_TXBERR) {
+ dev_err(&pdev->dev, "emc bus error interrupt status=0x%08X\n",
+ status);
+#ifdef CONFIG_NPCM7XX_EMC_ETH_DEBUG
+ npcm7xx_info_print(netdev);
+#endif
+ spin_lock_irqsave(ðer->lock, flags);
+ writel(0, (ether->reg + REG_MIEN)); /* disable any interrupt */
+ spin_unlock_irqrestore(ðer->lock, flags);
+ ether->need_reset = 1;
+ } else if (status & ~(MISTA_TXINTR | MISTA_TXCP | MISTA_TDU))
+ dev_err(&pdev->dev, "emc other error interrupt status=0x%08X\n",
+ status);
+
+ /* if we got MISTA_TXCP | MISTA_TDU remove those interrupt and call napi */
+ if (status & (MISTA_TXCP | MISTA_TDU) &
+ readl((ether->reg + REG_MIEN))) {
+ __le32 reg_mien;
+
+ spin_lock_irqsave(ðer->lock, flags);
+ reg_mien = readl((ether->reg + REG_MIEN));
+ if (reg_mien & ENTDU)
+ /* Disable TDU interrupt */
+ writel(reg_mien & (~ENTDU), (ether->reg + REG_MIEN));
+
+ spin_unlock_irqrestore(ðer->lock, flags);
+
+ if (status & MISTA_TXCP)
+ ether->tx_cp_i++;
+ if (status & MISTA_TDU)
+ ether->tx_tdu_i++;
+ } else {
+ dev_dbg(&pdev->dev, "status=0x%08X\n", status);
+ }
+
+ napi_schedule(ðer->napi);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t npcm7xx_rx_interrupt(int irq, void *dev_id)
+{
+ struct net_device *netdev = (struct net_device *)dev_id;
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ struct platform_device *pdev = ether->pdev;
+ __le32 status;
+ unsigned long flags;
+ unsigned int any_err = 0;
+ __le32 rxfsm;
+
+ npcm7xx_get_and_clear_int(netdev, &status, 0xFFFF);
+ ether->rx_int_count++;
+
+ if (unlikely(status & MISTA_RXBERR)) {
+ ether->rx_berr++;
+ dev_err(&pdev->dev, "emc rx bus error status=0x%08X\n", status);
+#ifdef CONFIG_NPCM7XX_EMC_ETH_DEBUG
+ npcm7xx_info_print(netdev);
+#endif
+ spin_lock_irqsave(ðer->lock, flags);
+ writel(0, (ether->reg + REG_MIEN)); /* disable any interrupt */
+ spin_unlock_irqrestore(ðer->lock, flags);
+ ether->need_reset = 1;
+ napi_schedule(ðer->napi);
+ return IRQ_HANDLED;
+ }
+
+ if (unlikely(status & (MISTA_RXOV | MISTA_RDU))) {
+ /* filter out all received packets until we have
+ * enough available buffer descriptors
+ */
+ writel(0, (ether->reg + REG_CAMCMR));
+ any_err = 1;
+ if (status & (MISTA_RXOV))
+ ether->rxov++;
+ if (status & (MISTA_RDU))
+ ether->rdu++;
+
+ /* workaround Errata 1.36: EMC Hangs on receiving 253-256
+ * byte packet
+ */
+ rxfsm = readl((ether->reg + REG_RXFSM));
+
+ if ((rxfsm & 0xFFFFF000) == 0x08044000) {
+ int i;
+
+ for (i = 0; i < 32; i++) {
+ rxfsm = readl((ether->reg + REG_RXFSM));
+ if ((rxfsm & 0xFFFFF000) != 0x08044000)
+ break;
+ }
+ if (i == 32) {
+ ether->rx_stuck++;
+ spin_lock_irqsave(ðer->lock, flags);
+#ifdef CONFIG_NPCM7XX_EMC_ETH_DEBUG
+ npcm7xx_info_print(netdev);
+#endif
+ writel(0, (ether->reg + REG_MIEN));
+ spin_unlock_irqrestore(ðer->lock, flags);
+ ether->need_reset = 1;
+ napi_schedule(ðer->napi);
+ dev_err(&pdev->dev,
+ "stuck on REG_RXFSM = 0x%08X status=%08X doing reset!\n",
+ rxfsm, status);
+ return IRQ_HANDLED;
+ }
+ }
+ }
+
+ /* echo MISTA status on unexpected flags although we don't do anithing
+ * with them
+ */
+ if (unlikely(status &
+ (/* MISTA_RXINTR | */ /* Receive - all RX interrupt set this */
+ MISTA_CRCE | /* CRC Error */
+ /* MISTA_RXOV | */ /* Receive FIFO Overflow - we alread handled it */
+ (!IS_VLAN * MISTA_PTLE) | /* Packet Too Long is needed if VLAN is not supported */
+ /* MISTA_RXGD | */ /* Receive Good - this is the common good case */
+ MISTA_ALIE | /* Alignment Error */
+ MISTA_RP | /* Runt Packet */
+ MISTA_MMP | /* More Missed Packet */
+ MISTA_DFOI | /* Maximum Frame Length */
+ /* MISTA_DENI | */ /* DMA Early Notification - every packet get this */
+ /* MISTA_RDU | */ /* Receive Descriptor Unavailable */
+ /* MISTA_RXBERR | */ /* Receive Bus Error Interrupt - we alread handled it */
+ /* MISTA_CFR | */ /* Control Frame Receive - not an error */
+ 0))) {
+ dev_dbg(&pdev->dev, "emc rx MISTA status=0x%08X\n", status);
+ any_err = 1;
+ ether->rx_err++;
+ }
+
+ if (!any_err && ((status & MISTA_RXGD) == 0))
+ dev_err(&pdev->dev, "emc rx MISTA status=0x%08X\n", status);
+
+ spin_lock_irqsave(ðer->lock, flags);
+ writel(readl((ether->reg + REG_MIEN)) & ~ENRXGD,
+ (ether->reg + REG_MIEN));
+ spin_unlock_irqrestore(ðer->lock, flags);
+ napi_schedule(ðer->napi);
+
+ return IRQ_HANDLED;
+}
+
+static int npcm7xx_poll(struct napi_struct *napi, int budget)
+{
+ struct npcm7xx_ether *ether =
+ container_of(napi, struct npcm7xx_ether, napi);
+ struct npcm7xx_rxbd *rxbd;
+ struct net_device *netdev = ether->netdev;
+ struct platform_device *pdev = ether->pdev;
+ struct sk_buff *s;
+ unsigned int length;
+ __le32 status;
+ unsigned long flags;
+ int rx_cnt = 0;
+ int complete = 0;
+ unsigned int rx_offset = (readl((ether->reg + REG_CRXDSA)) -
+ ether->start_rx_ptr) /
+ sizeof(struct npcm7xx_txbd);
+ unsigned int local_count = (rx_offset >= ether->cur_rx) ?
+ rx_offset - ether->cur_rx : rx_offset +
+ RX_QUEUE_LEN - ether->cur_rx;
+
+ if (local_count > ether->max_waiting_rx)
+ ether->max_waiting_rx = local_count;
+
+ if (local_count > (4 * RX_POLL_SIZE))
+ /* we are porbably in a storm of short packets and we don't
+ * want to get into RDU since short packets in RDU cause
+ * many RXOV which may cause EMC halt, so we filter out all
+ * coming packets
+ */
+ writel(0, (ether->reg + REG_CAMCMR));
+
+ if (local_count <= budget)
+ /* we can restore accepting of packets */
+ writel(ether->camcmr, (ether->reg + REG_CAMCMR));
+
+ spin_lock_irqsave(ðer->lock, flags);
+ npcm7xx_clean_tx(netdev, false);
+ spin_unlock_irqrestore(ðer->lock, flags);
+
+ rxbd = (ether->rdesc + ether->cur_rx);
+
+ while (rx_cnt < budget) {
+ status = rxbd->sl;
+ if ((status & RX_OWN_DMA) == RX_OWN_DMA) {
+ complete = 1;
+ break;
+ }
+ /* for debug puposes we save the previous value */
+ rxbd->reserved = status;
+ s = ether->rx_skb[ether->cur_rx];
+ length = status & 0xFFFF;
+
+ /* If VLAN is not supporte RXDS_PTLE (packet too long) is also
+ * an error
+ */
+ if (likely((status & (RXDS_RXGD | RXDS_CRCE | RXDS_ALIE |
+ RXDS_RP | (IS_VLAN ? 0 : RXDS_PTLE))) ==
+ RXDS_RXGD) && likely(length <= MAX_PACKET_SIZE)) {
+ dma_unmap_single(&netdev->dev, (dma_addr_t)rxbd->buffer,
+ roundup(MAX_PACKET_SIZE_W_CRC, 4),
+ DMA_FROM_DEVICE);
+
+ skb_put(s, length);
+ s->protocol = eth_type_trans(s, netdev);
+ netif_receive_skb(s);
+ ether->stats.rx_packets++;
+ ether->stats.rx_bytes += length;
+ rx_cnt++;
+ ether->rx_count_pool++;
+
+ /* now we allocate new skb instead if the used one. */
+ if (!get_new_skb(netdev, ether->cur_rx))
+ ether->stats.rx_dropped++;
+ } else {
+ ether->rx_err_count++;
+ ether->stats.rx_errors++;
+ dev_dbg(&pdev->dev, "rx_errors = %lu status = 0x%08X\n",
+ ether->stats.rx_errors, status);
+
+ if (status & RXDS_RP) {
+ ether->stats.rx_length_errors++;
+ dev_dbg(&pdev->dev, "rx_length_errors = %lu\n",
+ ether->stats.rx_length_errors);
+ } else if (status & RXDS_CRCE) {
+ ether->stats.rx_crc_errors++;
+ dev_dbg(&pdev->dev, "rx_crc_errors = %lu\n",
+ ether->stats.rx_crc_errors);
+ } else if (status & RXDS_ALIE) {
+ ether->stats.rx_frame_errors++;
+ dev_dbg(&pdev->dev, "rx_frame_errors = %lu\n",
+ ether->stats.rx_frame_errors);
+ } else if (((!IS_VLAN) && (status & RXDS_PTLE)) ||
+ length > MAX_PACKET_SIZE) {
+ ether->stats.rx_length_errors++;
+ dev_dbg(&pdev->dev, "rx_length_errors = %lu\n",
+ ether->stats.rx_length_errors);
+ }
+ }
+
+ /* make sure other values are set before we set owner */
+ wmb();
+
+ rxbd->sl = RX_OWN_DMA;
+ /* make sure that data is in memory before we trigger RX */
+ wmb();
+
+ if (++ether->cur_rx >= RX_QUEUE_LEN)
+ ether->cur_rx = 0;
+
+ rxbd = (ether->rdesc + ether->cur_rx);
+ }
+
+ if (complete) {
+ napi_complete(napi);
+
+ if (ether->need_reset) {
+ dev_dbg(&pdev->dev, "Reset\n");
+ npcm7xx_reset_mac(netdev, 1);
+ }
+
+ spin_lock_irqsave(ðer->lock, flags);
+ writel(readl((ether->reg + REG_MIEN)) | ENRXGD, (ether->reg +
+ REG_MIEN));
+ spin_unlock_irqrestore(ðer->lock, flags);
+ } else {
+ rx_offset = (readl((ether->reg + REG_CRXDSA)) -
+ ether->start_rx_ptr) / sizeof(struct npcm7xx_txbd);
+ local_count = (rx_offset >= ether->cur_rx) ? rx_offset -
+ ether->cur_rx : rx_offset + RX_QUEUE_LEN -
+ ether->cur_rx;
+
+ if (local_count > ether->max_waiting_rx)
+ ether->max_waiting_rx = local_count;
+
+ if (local_count > (3 * RX_POLL_SIZE))
+ /* we are porbably in a storm of short packets and
+ * we don't want to get into RDU since short packets in
+ * RDU cause many RXOV which may cause
+ * EMC halt, so we filter out all coming packets
+ */
+ writel(0, (ether->reg + REG_CAMCMR));
+ if (local_count <= RX_POLL_SIZE)
+ /* we can restore accepting of packets */
+ writel(ether->camcmr, (ether->reg + REG_CAMCMR));
+ }
+
+ /* trigger RX */
+ writel(ENSTART, (ether->reg + REG_RSDR));
+ return rx_cnt;
+}
+
+static int npcm7xx_ether_open(struct net_device *netdev)
+{
+ struct npcm7xx_ether *ether;
+ struct platform_device *pdev;
+
+ ether = netdev_priv(netdev);
+ pdev = ether->pdev;
+
+ if (ether->use_ncsi) {
+ ether->speed = 100;
+ ether->duplex = DUPLEX_FULL;
+ npcm7xx_opmode(netdev, 100, DUPLEX_FULL);
+ }
+ npcm7xx_reset_mac(netdev, 0);
+
+ if (request_irq(ether->txirq, npcm7xx_tx_interrupt, 0x0, pdev->name,
+ netdev)) {
+ dev_err(&pdev->dev, "register irq tx failed\n");
+ npcm7xx_ether_close(netdev);
+ return -EAGAIN;
+ }
+
+ if (request_irq(ether->rxirq, npcm7xx_rx_interrupt, 0x0, pdev->name,
+ netdev)) {
+ dev_err(&pdev->dev, "register irq rx failed\n");
+ npcm7xx_ether_close(netdev);
+ return -EAGAIN;
+ }
+
+ if (ether->phy_dev)
+ phy_start(ether->phy_dev);
+ else if (ether->use_ncsi)
+ netif_carrier_on(netdev);
+
+ netif_start_queue(netdev);
+ napi_enable(ðer->napi);
+
+ /* trigger RX */
+ writel(ENSTART, (ether->reg + REG_RSDR));
+
+ /* Start the NCSI device */
+ if (ether->use_ncsi) {
+ int err = ncsi_start_dev(ether->ncsidev);
+
+ if (err) {
+ npcm7xx_ether_close(netdev);
+ return err;
+ }
+ }
+
+ dev_info(&pdev->dev, "%s is OPENED\n", netdev->name);
+
+ return 0;
+}
+
+static int npcm7xx_ether_ioctl(struct net_device *netdev,
+ struct ifreq *ifr, int cmd)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ struct phy_device *phydev = ether->phy_dev;
+
+ if (!netif_running(netdev))
+ return -EINVAL;
+
+ if (!phydev)
+ return -ENODEV;
+
+ return phy_mii_ioctl(phydev, ifr, cmd);
+}
+
+static void npcm7xx_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, DRV_MODULE_NAME, sizeof(info->driver));
+ strlcpy(info->version, DRV_MODULE_VERSION, sizeof(info->version));
+ strlcpy(info->fw_version, "N/A", sizeof(info->fw_version));
+ strlcpy(info->bus_info, "N/A", sizeof(info->bus_info));
+}
+
+static int npcm7xx_get_settings(struct net_device *netdev,
+ struct ethtool_link_ksettings *cmd)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ struct phy_device *phydev = ether->phy_dev;
+
+ if (!phydev)
+ return -ENODEV;
+
+ dev_info(ðer->pdev->dev, "\n\nnpcm7xx_get_settings\n");
+ phy_ethtool_ksettings_get(phydev, cmd);
+
+ return 0;
+}
+
+static int npcm7xx_set_settings(struct net_device *netdev,
+ const struct ethtool_link_ksettings *cmd)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ struct phy_device *phydev = ether->phy_dev;
+ int ret;
+
+ if (!phydev)
+ return -ENODEV;
+
+ dev_info(ðer->pdev->dev, "\n\nnpcm7xx_set_settings\n");
+ ret = phy_ethtool_ksettings_set(phydev, cmd);
+
+ return ret;
+}
+
+static u32 npcm7xx_get_msglevel(struct net_device *netdev)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+
+ return ether->msg_enable;
+}
+
+static void npcm7xx_set_msglevel(struct net_device *netdev, u32 level)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+
+ ether->msg_enable = level;
+}
+
+static const struct ethtool_ops npcm7xx_ether_ethtool_ops = {
+ .get_link_ksettings = npcm7xx_get_settings,
+ .set_link_ksettings = npcm7xx_set_settings,
+ .get_drvinfo = npcm7xx_get_drvinfo,
+ .get_msglevel = npcm7xx_get_msglevel,
+ .set_msglevel = npcm7xx_set_msglevel,
+ .get_link = ethtool_op_get_link,
+};
+
+static const struct net_device_ops npcm7xx_ether_netdev_ops = {
+ .ndo_open = npcm7xx_ether_open,
+ .ndo_stop = npcm7xx_ether_close,
+ .ndo_start_xmit = npcm7xx_ether_start_xmit,
+ .ndo_get_stats = npcm7xx_ether_stats,
+ .ndo_set_rx_mode = npcm7xx_ether_set_rx_mode,
+ .ndo_set_mac_address = npcm7xx_set_mac_address,
+ .ndo_do_ioctl = npcm7xx_ether_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
+static void get_mac_address(struct net_device *netdev)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ struct platform_device *pdev = ether->pdev;
+ struct device_node *np = ether->pdev->dev.of_node;
+ const u8 *mac_address = NULL;
+
+ mac_address = of_get_mac_address(np);
+
+ if (mac_address != 0)
+ ether_addr_copy(netdev->dev_addr, mac_address);
+
+ if (is_valid_ether_addr(netdev->dev_addr)) {
+ dev_info(&pdev->dev, "%s: device MAC address : %pM\n",
+ pdev->name, netdev->dev_addr);
+ } else {
+ eth_hw_addr_random(netdev);
+ dev_info(&pdev->dev,
+ "%s: device MAC address (random generator) %pM\n",
+ netdev->name, netdev->dev_addr);
+ }
+}
+
+static int npcm7xx_mii_setup(struct net_device *netdev)
+{
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+ struct platform_device *pdev;
+ struct phy_device *phydev = NULL;
+ int i, err = 0;
+
+ pdev = ether->pdev;
+
+ ether->mii_bus = mdiobus_alloc();
+ if (!ether->mii_bus) {
+ err = -ENOMEM;
+ dev_err(&pdev->dev, "mdiobus_alloc() failed\n");
+ goto out0;
+ }
+
+ ether->mii_bus->name = "npcm7xx_rmii";
+ ether->mii_bus->read = &npcm7xx_mdio_read;
+ ether->mii_bus->write = &npcm7xx_mdio_write;
+ ether->mii_bus->reset = &npcm7xx_mdio_reset;
+ snprintf(ether->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
+ ether->pdev->name, ether->pdev->id);
+ dev_dbg(&pdev->dev, "%s ether->mii_bus->id=%s\n", __func__,
+ ether->mii_bus->id);
+ ether->mii_bus->priv = ether;
+ ether->mii_bus->parent = ðer->pdev->dev;
+
+ for (i = 0; i < PHY_MAX_ADDR; i++)
+ ether->mii_bus->irq[i] = PHY_POLL;
+
+ platform_set_drvdata(ether->pdev, ether->mii_bus);
+
+ /* Enable MDIO Clock */
+ writel(readl((ether->reg + REG_MCMDR)) | MCMDR_ENMDC,
+ (ether->reg + REG_MCMDR));
+
+ if (mdiobus_register(ether->mii_bus)) {
+ dev_err(&pdev->dev, "mdiobus_register() failed\n");
+ goto out2;
+ }
+
+ phydev = phy_find_first(ether->mii_bus);
+ if (!phydev) {
+ dev_err(&pdev->dev, "phy_find_first() failed\n");
+ goto out3;
+ }
+
+ dev_info(&pdev->dev, " name = %s ETH-Phy-Id = 0x%x\n",
+ phydev_name(phydev), phydev->phy_id);
+
+ phydev = phy_connect(netdev, phydev_name(phydev),
+ &adjust_link,
+ PHY_INTERFACE_MODE_RMII);
+
+ dev_info(&pdev->dev, " ETH-Phy-Id = 0x%x name = %s\n",
+ phydev->phy_id, phydev->drv->name);
+
+ if (IS_ERR(phydev)) {
+ err = PTR_ERR(phydev);
+ dev_err(&pdev->dev, "phy_connect() failed - %d\n", err);
+ goto out3;
+ }
+
+ phydev->supported &= PHY_BASIC_FEATURES;
+ phydev->advertising = phydev->supported;
+ ether->phy_dev = phydev;
+
+ return 0;
+
+out3:
+ mdiobus_unregister(ether->mii_bus);
+out2:
+ kfree(ether->mii_bus->irq);
+ mdiobus_free(ether->mii_bus);
+out0:
+
+ return err;
+}
+
+static const struct of_device_id emc_dt_id[] = {
+ { .compatible = "nuvoton,npcm750-emc", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, emc_dt_id);
+
+static void npcm7xx_ncsi_handler(struct ncsi_dev *nd)
+{
+ if (unlikely(nd->state != ncsi_dev_state_functional))
+ return;
+
+ netdev_info(nd->dev, "NCSI interface %s\n",
+ nd->link_up ? "up" : "down");
+}
+
+static int npcm7xx_ether_probe(struct platform_device *pdev)
+{
+ struct npcm7xx_ether *ether;
+ struct net_device *netdev;
+ int error;
+
+ struct clk *emc_clk = NULL;
+ struct device_node *np = pdev->dev.of_node;
+
+ pdev->id = of_alias_get_id(np, "ethernet");
+ if (pdev->id < 0)
+ pdev->id = 0;
+
+ emc_clk = devm_clk_get(&pdev->dev, NULL);
+
+ if (IS_ERR(emc_clk))
+ return PTR_ERR(emc_clk);
+
+ /* Enable Clock */
+ clk_prepare_enable(emc_clk);
+
+ error = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (error)
+ return -ENODEV;
+
+ netdev = alloc_etherdev(sizeof(struct npcm7xx_ether));
+ if (!netdev)
+ return -ENOMEM;
+
+ ether = netdev_priv(netdev);
+
+ ether->reset = devm_reset_control_get(&pdev->dev, NULL);
+ if (IS_ERR(ether->reset))
+ return PTR_ERR(ether->reset);
+
+ /* Reset EMC module */
+ reset_control_assert(ether->reset);
+ udelay(5);
+ reset_control_deassert(ether->reset);
+
+ ether->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!ether->res) {
+ dev_err(&pdev->dev, "failed to get I/O memory\n");
+ error = -ENXIO;
+ goto failed_free;
+ }
+
+ if (!request_mem_region(ether->res->start,
+ resource_size(ether->res), pdev->name)) {
+ dev_err(&pdev->dev, "failed to request I/O memory\n");
+ error = -EBUSY;
+ goto failed_free;
+ }
+
+ ether->reg = ioremap(ether->res->start, resource_size(ether->res));
+ dev_dbg(&pdev->dev, "%s ether->reg = 0x%x\n", __func__,
+ (unsigned int)ether->reg);
+
+ if (!ether->reg) {
+ dev_err(&pdev->dev, "failed to remap I/O memory\n");
+ error = -ENXIO;
+ goto failed_free_mem;
+ }
+
+ ether->txirq = platform_get_irq(pdev, 0);
+ if (ether->txirq < 0) {
+ dev_err(&pdev->dev, "failed to get ether tx irq\n");
+ error = -ENXIO;
+ goto failed_free_io;
+ }
+
+ ether->rxirq = platform_get_irq(pdev, 1);
+ if (ether->rxirq < 0) {
+ dev_err(&pdev->dev, "failed to get ether rx irq\n");
+ error = -ENXIO;
+ goto failed_free_io;
+ }
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+ platform_set_drvdata(pdev, netdev);
+ ether->netdev = netdev;
+
+ ether->pdev = pdev;
+ ether->msg_enable = NETIF_MSG_LINK;
+
+ netdev->netdev_ops = &npcm7xx_ether_netdev_ops;
+ netdev->ethtool_ops = &npcm7xx_ether_ethtool_ops;
+
+ netdev->tx_queue_len = TX_QUEUE_LEN;
+ netdev->dma = 0x0;
+ netdev->watchdog_timeo = TX_TIMEOUT;
+
+ get_mac_address(netdev);
+
+ ether->speed = 100;
+ ether->duplex = DUPLEX_FULL;
+
+ spin_lock_init(ðer->lock);
+
+ netif_napi_add(netdev, ðer->napi, npcm7xx_poll, RX_POLL_SIZE);
+
+ if (pdev->dev.of_node &&
+ of_get_property(pdev->dev.of_node, "use-ncsi", NULL)) {
+ if (!IS_ENABLED(CONFIG_NET_NCSI)) {
+ dev_err(&pdev->dev, "CONFIG_NET_NCSI not enabled\n");
+ error = -ENODEV;
+ goto failed_free_napi;
+ }
+ dev_info(&pdev->dev, "Using NCSI interface\n");
+ ether->use_ncsi = true;
+ ether->ncsidev = ncsi_register_dev(netdev,
+ npcm7xx_ncsi_handler);
+ if (!ether->ncsidev) {
+ error = -ENODEV;
+ goto failed_free_napi;
+ }
+ } else {
+ ether->use_ncsi = false;
+ error = npcm7xx_mii_setup(netdev);
+ if (error < 0) {
+ dev_err(&pdev->dev, "npcm7xx_mii_setup err\n");
+ goto failed_free_napi;
+ }
+ }
+
+ error = register_netdev(netdev);
+ if (error != 0) {
+ dev_err(&pdev->dev, "register_netdev() failed\n");
+ error = -ENODEV;
+ goto failed_free_napi;
+ }
+
+#ifdef CONFIG_DEBUG_FS
+ npcm7xx_debug_fs(ether);
+#endif
+
+ return 0;
+
+failed_free_napi:
+ netif_napi_del(ðer->napi);
+ platform_set_drvdata(pdev, NULL);
+failed_free_io:
+ iounmap(ether->reg);
+failed_free_mem:
+ release_mem_region(ether->res->start, resource_size(ether->res));
+failed_free:
+ free_netdev(netdev);
+
+ return error;
+}
+
+static int npcm7xx_ether_remove(struct platform_device *pdev)
+{
+ struct net_device *netdev = platform_get_drvdata(pdev);
+ struct npcm7xx_ether *ether = netdev_priv(netdev);
+
+#ifdef CONFIG_DEBUG_FS
+ debugfs_remove_recursive(ether->dbgfs_dir);
+#endif
+
+ unregister_netdev(netdev);
+
+ free_irq(ether->txirq, netdev);
+ free_irq(ether->rxirq, netdev);
+
+ if (ether->phy_dev)
+ phy_disconnect(ether->phy_dev);
+
+ mdiobus_unregister(ether->mii_bus);
+ kfree(ether->mii_bus->irq);
+ mdiobus_free(ether->mii_bus);
+
+ platform_set_drvdata(pdev, NULL);
+
+ free_netdev(netdev);
+ return 0;
+}
+
+static struct platform_driver npcm7xx_ether_driver = {
+ .probe = npcm7xx_ether_probe,
+ .remove = npcm7xx_ether_remove,
+ .driver = {
+ .name = DRV_MODULE_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(emc_dt_id),
+ },
+};
+
+module_platform_driver(npcm7xx_ether_driver);
+
+MODULE_AUTHOR("Nuvoton Technology Corp.");
+MODULE_DESCRIPTION("NPCM750 EMC driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:npcm750-emc");
+MODULE_VERSION(DRV_MODULE_VERSION);
--
2.18.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v1 2/2] net: npcm: add NPCM7xx EMC 10/100 Ethernet driver
2019-08-01 7:26 ` [PATCH v1 2/2] net: npcm: add NPCM7xx EMC 10/100 Ethernet driver Avi Fishman
@ 2019-08-01 16:27 ` David Miller
2019-08-01 17:25 ` Willem de Bruijn
1 sibling, 0 replies; 8+ messages in thread
From: David Miller @ 2019-08-01 16:27 UTC (permalink / raw)
To: avifishman70
Cc: venture, yuenn, benjaminfair, robh+dt, mark.rutland, gregkh,
tmaimon77, tali.perry1, openbmc, netdev, devicetree,
linux-kernel, tglx
From: Avi Fishman <avifishman70@gmail.com>
Date: Thu, 1 Aug 2019 10:26:11 +0300
> +#Eternet 10/100 EMC
"Ethernet"
> +#ifdef CONFIG_NPCM7XX_EMC_ETH_DEBUG
> +#define DEBUG
> +#endif
Please don't control the DEBUG define in this way.
> +#if defined CONFIG_NPCM7XX_EMC_ETH_DEBUG || defined CONFIG_DEBUG_FS
> +#define REG_PRINT(reg_name) {t = scnprintf(next, size, "%-10s = %08X\n", \
> + #reg_name, readl(ether->reg + (reg_name))); size -= t; next += t; }
> +#define DUMP_PRINT(f, x...) {t = scnprintf(next, size, f, ## x); size -= t; \
> + next += t; }
Really, get rid of this custom debugging infrastructure and just use
generic facilities the kernel has for this, as designed.
> +static int npcm7xx_info_dump(char *buf, int count, struct net_device *netdev)
> +{
> + struct npcm7xx_ether *ether = netdev_priv(netdev);
> + struct npcm7xx_txbd *txbd;
> + struct npcm7xx_rxbd *rxbd;
> + unsigned long flags;
> + unsigned int i, cur, txd_offset, rxd_offset;
> + char *next = buf;
> + unsigned int size = count;
> + int t;
> + int is_locked = spin_is_locked(ðer->lock);
Reverse christmas tree (longest to shortest) ordering for local variables
please.
Audit your entire submission for this problem.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v1 2/2] net: npcm: add NPCM7xx EMC 10/100 Ethernet driver
2019-08-01 7:26 ` [PATCH v1 2/2] net: npcm: add NPCM7xx EMC 10/100 Ethernet driver Avi Fishman
2019-08-01 16:27 ` David Miller
@ 2019-08-01 17:25 ` Willem de Bruijn
2019-08-06 13:19 ` Avi Fishman
1 sibling, 1 reply; 8+ messages in thread
From: Willem de Bruijn @ 2019-08-01 17:25 UTC (permalink / raw)
To: Avi Fishman
Cc: Patrick Venture, Nancy Yuen, benjaminfair, David Miller, robh+dt,
mark.rutland, Greg Kroah-Hartman, tmaimon77, tali.perry1,
openbmc, Network Development, devicetree, linux-kernel, tglx
On Thu, Aug 1, 2019 at 3:28 AM Avi Fishman <avifishman70@gmail.com> wrote:
>
> EMC Ethernet Media Access Controller supports 10/100 Mbps and
> RMII.
> This driver has been working on Nuvoton BMC NPCM7xx.
>
> Signed-off-by: Avi Fishman <avifishman70@gmail.com>
> +/* global setting for driver */
> +#define RX_QUEUE_LEN 128
> +#define TX_QUEUE_LEN 64
> +#define MAX_RBUFF_SZ 0x600
> +#define MAX_TBUFF_SZ 0x600
> +#define TX_TIMEOUT 50
> +#define DELAY 1000
> +#define CAM0 0x0
> +#define RX_POLL_SIZE 16
> +
> +#ifdef CONFIG_VLAN_8021Q
> +#define IS_VLAN 1
> +#else
> +#define IS_VLAN 0
> +#endif
> +
> +#define MAX_PACKET_SIZE (1514 + (IS_VLAN * 4))
1514 -> ETH_FRAME_LEN
4 -> VLAN_HLEN
Does this device support stacked VLAN?
Is this really the device maximum?
> +#define MAX_PACKET_SIZE_W_CRC (MAX_PACKET_SIZE + 4) /* 1518 */
4 -> ETH_FCS_LEN
> +#if defined CONFIG_NPCM7XX_EMC_ETH_DEBUG || defined CONFIG_DEBUG_FS
> +#define REG_PRINT(reg_name) {t = scnprintf(next, size, "%-10s = %08X\n", \
> + #reg_name, readl(ether->reg + (reg_name))); size -= t; next += t; }
> +#define DUMP_PRINT(f, x...) {t = scnprintf(next, size, f, ## x); size -= t; \
> + next += t; }
> +
> +static int npcm7xx_info_dump(char *buf, int count, struct net_device *netdev)
> +{
> + struct npcm7xx_ether *ether = netdev_priv(netdev);
> + struct npcm7xx_txbd *txbd;
> + struct npcm7xx_rxbd *rxbd;
> + unsigned long flags;
> + unsigned int i, cur, txd_offset, rxd_offset;
> + char *next = buf;
> + unsigned int size = count;
> + int t;
> + int is_locked = spin_is_locked(ðer->lock);
> +
> + if (!is_locked)
> + spin_lock_irqsave(ðer->lock, flags);
> +
> + /* ------basic driver information ---- */
> + DUMP_PRINT("NPCM7XX EMC %s driver version: %s\n", netdev->name,
> + DRV_MODULE_VERSION);
> +
> + REG_PRINT(REG_CAMCMR);
> + REG_PRINT(REG_CAMEN);
> + REG_PRINT(REG_CAMM_BASE);
> + REG_PRINT(REG_CAML_BASE);
> + REG_PRINT(REG_TXDLSA);
> + REG_PRINT(REG_RXDLSA);
> + REG_PRINT(REG_MCMDR);
> + REG_PRINT(REG_MIID);
> + REG_PRINT(REG_MIIDA);
> + REG_PRINT(REG_FFTCR);
> + REG_PRINT(REG_TSDR);
> + REG_PRINT(REG_RSDR);
> + REG_PRINT(REG_DMARFC);
> + REG_PRINT(REG_MIEN);
> + REG_PRINT(REG_MISTA);
> + REG_PRINT(REG_MGSTA);
> + REG_PRINT(REG_MPCNT);
> + writel(0x7FFF, (ether->reg + REG_MPCNT));
> + REG_PRINT(REG_MRPC);
> + REG_PRINT(REG_MRPCC);
> + REG_PRINT(REG_MREPC);
> + REG_PRINT(REG_DMARFS);
> + REG_PRINT(REG_CTXDSA);
> + REG_PRINT(REG_CTXBSA);
> + REG_PRINT(REG_CRXDSA);
> + REG_PRINT(REG_CRXBSA);
> + REG_PRINT(REG_RXFSM);
> + REG_PRINT(REG_TXFSM);
> + REG_PRINT(REG_FSM0);
> + REG_PRINT(REG_FSM1);
> + REG_PRINT(REG_DCR);
> + REG_PRINT(REG_DMMIR);
> + REG_PRINT(REG_BISTR);
> + DUMP_PRINT("\n");
> +
> + DUMP_PRINT("netif_queue %s\n\n", netif_queue_stopped(netdev) ?
> + "Stopped" : "Running");
> + if (ether->rdesc)
> + DUMP_PRINT("napi is %s\n\n", test_bit(NAPI_STATE_SCHED,
> + ðer->napi.state) ?
> + "scheduled" :
> + "not scheduled");
> +
> + txd_offset = (readl((ether->reg + REG_CTXDSA)) -
> + readl((ether->reg + REG_TXDLSA))) /
> + sizeof(struct npcm7xx_txbd);
> + DUMP_PRINT("TXD offset %6d\n", txd_offset);
> + DUMP_PRINT("cur_tx %6d\n", ether->cur_tx);
> + DUMP_PRINT("finish_tx %6d\n", ether->finish_tx);
> + DUMP_PRINT("pending_tx %6d\n", ether->pending_tx);
> + /* debug counters */
> + DUMP_PRINT("tx_tdu %6d\n", ether->tx_tdu);
> + ether->tx_tdu = 0;
> + DUMP_PRINT("tx_tdu_i %6d\n", ether->tx_tdu_i);
> + ether->tx_tdu_i = 0;
> + DUMP_PRINT("tx_cp_i %6d\n", ether->tx_cp_i);
> + ether->tx_cp_i = 0;
> + DUMP_PRINT("tx_int_count %6d\n", ether->tx_int_count);
> + ether->tx_int_count = 0;
> + DUMP_PRINT("count_xmit tx %6d\n", ether->count_xmit);
> + ether->count_xmit = 0;
> + DUMP_PRINT("count_finish %6d\n", ether->count_finish);
> + ether->count_finish = 0;
> + DUMP_PRINT("\n");
> +
> + rxd_offset = (readl((ether->reg + REG_CRXDSA)) -
> + readl((ether->reg + REG_RXDLSA)))
> + / sizeof(struct npcm7xx_txbd);
> + DUMP_PRINT("RXD offset %6d\n", rxd_offset);
> + DUMP_PRINT("cur_rx %6d\n", ether->cur_rx);
> + DUMP_PRINT("rx_err %6d\n", ether->rx_err);
> + ether->rx_err = 0;
> + DUMP_PRINT("rx_berr %6d\n", ether->rx_berr);
> + ether->rx_berr = 0;
> + DUMP_PRINT("rx_stuck %6d\n", ether->rx_stuck);
> + ether->rx_stuck = 0;
> + DUMP_PRINT("rdu %6d\n", ether->rdu);
> + ether->rdu = 0;
> + DUMP_PRINT("rxov rx %6d\n", ether->rxov);
> + ether->rxov = 0;
> + /* debug counters */
> + DUMP_PRINT("rx_int_count %6d\n", ether->rx_int_count);
> + ether->rx_int_count = 0;
> + DUMP_PRINT("rx_err_count %6d\n", ether->rx_err_count);
> + ether->rx_err_count = 0;
Basic counters like tx_packets and rx_errors are probably better
exported regardless of debug level as net_device_stats. And then don't
need to be copied in debug output.
Less standard counters like tx interrupt count are probably better
candidates for ethtool -S.
> +#ifdef CONFIG_NPCM7XX_EMC_ETH_DEBUG
> +static void npcm7xx_info_print(struct net_device *netdev)
> +{
> + char *emc_dump_buf;
> + int count;
> + struct npcm7xx_ether *ether;
> + struct platform_device *pdev;
> + char c;
> + char *tmp_buf;
> + const size_t print_size = 5 * PAGE_SIZE;
> +
> + ether = netdev_priv(netdev);
> + pdev = ether->pdev;
> +
> + emc_dump_buf = kmalloc(print_size, GFP_KERNEL);
> + if (!emc_dump_buf)
> + return;
> +
> + tmp_buf = emc_dump_buf;
> + count = npcm7xx_info_dump(emc_dump_buf, print_size, netdev);
> + while (count > 512) {
> + c = tmp_buf[512];
> + tmp_buf[512] = 0;
> + dev_info(&pdev->dev, "%s", tmp_buf);
> + tmp_buf += 512;
> + tmp_buf[0] = c;
> + count -= 512;
Missing closing parenthesis.
Also, why this buffering to printk?
> +static void npcm7xx_write_cam(struct net_device *netdev,
> + unsigned int x, unsigned char *pval)
> +{
> + struct npcm7xx_ether *ether = netdev_priv(netdev);
> + __le32 msw, lsw;
> +
> + msw = (pval[0] << 24) | (pval[1] << 16) | (pval[2] << 8) | pval[3];
> +
> + lsw = (pval[4] << 24) | (pval[5] << 16);
Does __le32 plus this explicit shifting define host endianness? Better
to keep independent?
> +
> + writel(lsw, (ether->reg + REG_CAML_BASE) + x * CAM_ENTRY_SIZE);
> + writel(msw, (ether->reg + REG_CAMM_BASE) + x * CAM_ENTRY_SIZE);
> + dev_dbg(ðer->pdev->dev,
> + "REG_CAML_BASE = 0x%08X REG_CAMM_BASE = 0x%08X", lsw, msw);
> +}
> +
> +static struct sk_buff *get_new_skb(struct net_device *netdev, u32 i)
> +{
> + __le32 buffer;
> + struct npcm7xx_ether *ether = netdev_priv(netdev);
> + struct sk_buff *skb = netdev_alloc_skb(netdev,
> + roundup(MAX_PACKET_SIZE_W_CRC, 4));
> +
> + if (unlikely(!skb)) {
> + if (net_ratelimit())
> + netdev_warn(netdev, "failed to allocate rx skb\n");
can use net_warn_ratelimited (here and elsewhere)
> + buffer = ether->rx_scratch_dma;
> + } else {
> + /* Do not unmark the following skb_reserve() Receive Buffer
> + * Starting Address must be aligned to 4 bytes and the following
> + * line if unmarked will make it align to 2 and this likely will
> + * hult the RX and crash the linux
halt?
> + * skb_reserve(skb, NET_IP_ALIGN);
> + */
> + skb->dev = netdev;
> + buffer = dma_map_single(&netdev->dev,
> + skb->data,
> + roundup(MAX_PACKET_SIZE_W_CRC, 4),
> + DMA_FROM_DEVICE);
> + if (unlikely(dma_mapping_error(&netdev->dev, buffer))) {
> + if (net_ratelimit())
> + netdev_err(netdev, "failed to map rx page\n");
> + dev_kfree_skb_any(skb);
> + buffer = ether->rx_scratch_dma;
> + skb = NULL;
> + }
> + }
> + ether->rx_skb[i] = skb;
> + ether->rdesc[i].buffer = buffer;
> +
> + return skb;
> +}
> +
> +static int npcm7xx_ether_close(struct net_device *netdev)
> +{
> + struct npcm7xx_ether *ether = netdev_priv(netdev);
> +
> + npcm7xx_return_default_idle(netdev);
> +
> + if (ether->phy_dev)
> + phy_stop(ether->phy_dev);
> + else if (ether->use_ncsi)
> + ncsi_stop_dev(ether->ncsidev);
> +
> + msleep(20);
> +
> + free_irq(ether->txirq, netdev);
> + free_irq(ether->rxirq, netdev);
> +
> + netif_stop_queue(netdev);
> + napi_disable(ðer->napi);
Cleanup state in reverse of allocation.
> +static int npcm7xx_ether_start_xmit(struct sk_buff *skb, struct net_device *netdev)
> +{
> + struct npcm7xx_ether *ether = netdev_priv(netdev);
> + struct npcm7xx_txbd *txbd;
> + unsigned long flags;
> +
> + ether->count_xmit++;
> +
> + /* Insert new buffer */
> + txbd = (ether->tdesc + ether->cur_tx);
> + txbd->buffer = dma_map_single(&netdev->dev, skb->data, skb->len,
> + DMA_TO_DEVICE);
> + ether->tx_skb[ether->cur_tx] = skb;
> + if (skb->len > MAX_PACKET_SIZE)
> + dev_err(ðer->pdev->dev,
> + "skb->len (= %d) > MAX_PACKET_SIZE (= %d)\n",
> + skb->len, MAX_PACKET_SIZE);
> + txbd->sl = skb->len > MAX_PACKET_SIZE ? MAX_PACKET_SIZE : skb->len;
Check for errors before mapping to device, and drop packet? Probably
don't want to output truncated packets.
Also rate limit such messages.
> + dma_wmb();
> +
> + txbd->mode = TX_OWN_DMA | PADDINGMODE | CRCMODE;
> +
> + /* make sure that data is in memory before we trigger TX */
> + wmb();
> +
> + /* trigger TX */
> + writel(ENSTART, (ether->reg + REG_TSDR));
> +
> + if (++ether->cur_tx >= TX_QUEUE_LEN)
> + ether->cur_tx = 0;
> +
> + spin_lock_irqsave(ðer->lock, flags);
> + ether->pending_tx++;
> +
> + /* sometimes we miss the tx interrupt due to HW issue, so NAPI will not
> + * clean the pending tx, so we clean it also here
> + */
> + npcm7xx_clean_tx(netdev, true);
> +
> + if (ether->pending_tx >= TX_QUEUE_LEN - 1) {
> + __le32 reg_mien;
> + unsigned int index_to_wake = ether->cur_tx +
> + ((TX_QUEUE_LEN * 3) / 4);
> +
> + if (index_to_wake >= TX_QUEUE_LEN)
> + index_to_wake -= TX_QUEUE_LEN;
> +
> + txbd = (ether->tdesc + index_to_wake);
> + txbd->mode = TX_OWN_DMA | PADDINGMODE | CRCMODE | MACTXINTEN;
> +
> + /* make sure that data is in memory before we trigger TX */
> + wmb();
> +
> + /* Clear TDU interrupt */
> + writel(MISTA_TDU, (ether->reg + REG_MISTA));
> +
> + /* due to HW issue somtimes, we miss the TX interrupt we just
somtimes -> sometimes
> + * set (MACTXINTEN), so we also set TDU for Transmit
> + * Descriptor Unavailable interrupt
> + */
> + reg_mien = readl((ether->reg + REG_MIEN));
> + if (reg_mien != 0)
> + /* Enable TDU interrupt */
> + writel(reg_mien | ENTDU, (ether->reg + REG_MIEN));
> +
> + ether->tx_tdu++;
> + netif_stop_queue(netdev);
> + }
> +
> + spin_unlock_irqrestore(ðer->lock, flags);
> +
> + return 0;
> +}
> +
> +static irqreturn_t npcm7xx_tx_interrupt(int irq, void *dev_id)
> +{
> + struct npcm7xx_ether *ether;
> + struct platform_device *pdev;
> + struct net_device *netdev;
> + __le32 status;
> + unsigned long flags;
> +
> + netdev = dev_id;
> + ether = netdev_priv(netdev);
> + pdev = ether->pdev;
> +
> + npcm7xx_get_and_clear_int(netdev, &status, 0xFFFF0000);
> +
> + ether->tx_int_count++;
> +
> + if (status & MISTA_EXDEF)
> + dev_err(&pdev->dev, "emc defer exceed interrupt status=0x%08X\n"
> + , status);
> + else if (status & MISTA_TXBERR) {
> + dev_err(&pdev->dev, "emc bus error interrupt status=0x%08X\n",
> + status);
> +#ifdef CONFIG_NPCM7XX_EMC_ETH_DEBUG
> + npcm7xx_info_print(netdev);
> +#endif
> + spin_lock_irqsave(ðer->lock, flags);
irqsave in hard interrupt context?
> + writel(0, (ether->reg + REG_MIEN)); /* disable any interrupt */
> + spin_unlock_irqrestore(ðer->lock, flags);
> + ether->need_reset = 1;
> + } else if (status & ~(MISTA_TXINTR | MISTA_TXCP | MISTA_TDU))
> + dev_err(&pdev->dev, "emc other error interrupt status=0x%08X\n",
> + status);
> +
> + /* if we got MISTA_TXCP | MISTA_TDU remove those interrupt and call napi */
The goal of napi is to keep interrupts disabled until napi completes.
> + if (status & (MISTA_TXCP | MISTA_TDU) &
> + readl((ether->reg + REG_MIEN))) {
> + __le32 reg_mien;
> +
> + spin_lock_irqsave(ðer->lock, flags);
> + reg_mien = readl((ether->reg + REG_MIEN));
> + if (reg_mien & ENTDU)
> + /* Disable TDU interrupt */
> + writel(reg_mien & (~ENTDU), (ether->reg + REG_MIEN));
> +
> + spin_unlock_irqrestore(ðer->lock, flags);
> +
> + if (status & MISTA_TXCP)
> + ether->tx_cp_i++;
> + if (status & MISTA_TDU)
> + ether->tx_tdu_i++;
> + } else {
> + dev_dbg(&pdev->dev, "status=0x%08X\n", status);
> + }
> +
> + napi_schedule(ðer->napi);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t npcm7xx_rx_interrupt(int irq, void *dev_id)
> +{
> + struct net_device *netdev = (struct net_device *)dev_id;
> + struct npcm7xx_ether *ether = netdev_priv(netdev);
> + struct platform_device *pdev = ether->pdev;
> + __le32 status;
> + unsigned long flags;
> + unsigned int any_err = 0;
> + __le32 rxfsm;
> +
> + npcm7xx_get_and_clear_int(netdev, &status, 0xFFFF);
Same here
> +static int npcm7xx_poll(struct napi_struct *napi, int budget)
> +{
> + struct npcm7xx_ether *ether =
> + container_of(napi, struct npcm7xx_ether, napi);
> + struct npcm7xx_rxbd *rxbd;
> + struct net_device *netdev = ether->netdev;
> + struct platform_device *pdev = ether->pdev;
> + struct sk_buff *s;
> + unsigned int length;
> + __le32 status;
> + unsigned long flags;
> + int rx_cnt = 0;
> + int complete = 0;
> + unsigned int rx_offset = (readl((ether->reg + REG_CRXDSA)) -
> + ether->start_rx_ptr) /
> + sizeof(struct npcm7xx_txbd);
> + unsigned int local_count = (rx_offset >= ether->cur_rx) ?
> + rx_offset - ether->cur_rx : rx_offset +
> + RX_QUEUE_LEN - ether->cur_rx;
> +
> + if (local_count > ether->max_waiting_rx)
> + ether->max_waiting_rx = local_count;
> +
> + if (local_count > (4 * RX_POLL_SIZE))
> + /* we are porbably in a storm of short packets and we don't
porbably - probably
> + * want to get into RDU since short packets in RDU cause
> + * many RXOV which may cause EMC halt, so we filter out all
> + * coming packets
> + */
> + writel(0, (ether->reg + REG_CAMCMR));
> +
> + if (local_count <= budget)
> + /* we can restore accepting of packets */
> + writel(ether->camcmr, (ether->reg + REG_CAMCMR));
> +
> + spin_lock_irqsave(ðer->lock, flags);
> + npcm7xx_clean_tx(netdev, false);
> + spin_unlock_irqrestore(ðer->lock, flags);
> +
> + rxbd = (ether->rdesc + ether->cur_rx);
> +
> + while (rx_cnt < budget) {
> + status = rxbd->sl;
> + if ((status & RX_OWN_DMA) == RX_OWN_DMA) {
> + complete = 1;
> + break;
> + }
> + /* for debug puposes we save the previous value */
puposes -> purposes
> + rxbd->reserved = status;
> + s = ether->rx_skb[ether->cur_rx];
> + length = status & 0xFFFF;
> +
> + /* If VLAN is not supporte RXDS_PTLE (packet too long) is also
supporte -> supported (stopping pointing out typos after this).
> +static const struct net_device_ops npcm7xx_ether_netdev_ops = {
> + .ndo_open = npcm7xx_ether_open,
> + .ndo_stop = npcm7xx_ether_close,
> + .ndo_start_xmit = npcm7xx_ether_start_xmit,
> + .ndo_get_stats = npcm7xx_ether_stats,
> + .ndo_set_rx_mode = npcm7xx_ether_set_rx_mode,
> + .ndo_set_mac_address = npcm7xx_set_mac_address,
> + .ndo_do_ioctl = npcm7xx_ether_ioctl,
> + .ndo_validate_addr = eth_validate_addr,
> + .ndo_change_mtu = eth_change_mtu,
This is marked as deprecated. Also in light of the hardcoded
MAX_PACKET_SIZE, probably want to set dev->max_mtu.
> +static int npcm7xx_ether_probe(struct platform_device *pdev)
> +{
> + struct npcm7xx_ether *ether;
> + struct net_device *netdev;
> + int error;
> +
> + struct clk *emc_clk = NULL;
> + struct device_node *np = pdev->dev.of_node;
> +
> + pdev->id = of_alias_get_id(np, "ethernet");
> + if (pdev->id < 0)
> + pdev->id = 0;
> +
> + emc_clk = devm_clk_get(&pdev->dev, NULL);
> +
> + if (IS_ERR(emc_clk))
> + return PTR_ERR(emc_clk);
> +
> + /* Enable Clock */
> + clk_prepare_enable(emc_clk);
> +
> + error = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
> + if (error)
> + return -ENODEV;
> +
> + netdev = alloc_etherdev(sizeof(struct npcm7xx_ether));
> + if (!netdev)
> + return -ENOMEM;
> +
> + ether = netdev_priv(netdev);
> +
> + ether->reset = devm_reset_control_get(&pdev->dev, NULL);
> + if (IS_ERR(ether->reset))
> + return PTR_ERR(ether->reset);
Memory leak on error path
Also missing netif_napi_del in npcm7xx_ether_remove?
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v1 2/2] net: npcm: add NPCM7xx EMC 10/100 Ethernet driver
2019-08-01 17:25 ` Willem de Bruijn
@ 2019-08-06 13:19 ` Avi Fishman
2019-08-06 22:51 ` Willem de Bruijn
0 siblings, 1 reply; 8+ messages in thread
From: Avi Fishman @ 2019-08-06 13:19 UTC (permalink / raw)
To: Willem de Bruijn
Cc: Patrick Venture, Nancy Yuen, Benjamin Fair, David Miller,
Rob Herring, Mark Rutland, Greg Kroah-Hartman, Tomer Maimon,
Tali Perry, OpenBMC Maillist, Network Development, devicetree,
linux-kernel, Thomas Gleixner
Thanks for the input Willem,
Before I will submit a new version please help me with some questions:
On Thu, Aug 1, 2019 at 8:26 PM Willem de Bruijn
<willemdebruijn.kernel@gmail.com> wrote:
>
> On Thu, Aug 1, 2019 at 3:28 AM Avi Fishman <avifishman70@gmail.com> wrote:
> >
> > EMC Ethernet Media Access Controller supports 10/100 Mbps and
> > RMII.
> > This driver has been working on Nuvoton BMC NPCM7xx.
> >
> > Signed-off-by: Avi Fishman <avifishman70@gmail.com>
>
>
>
> > +/* global setting for driver */
> > +#define RX_QUEUE_LEN 128
> > +#define TX_QUEUE_LEN 64
> > +#define MAX_RBUFF_SZ 0x600
> > +#define MAX_TBUFF_SZ 0x600
> > +#define TX_TIMEOUT 50
> > +#define DELAY 1000
> > +#define CAM0 0x0
> > +#define RX_POLL_SIZE 16
> > +
> > +#ifdef CONFIG_VLAN_8021Q
> > +#define IS_VLAN 1
> > +#else
> > +#define IS_VLAN 0
> > +#endif
> > +
> > +#define MAX_PACKET_SIZE (1514 + (IS_VLAN * 4))
>
> 1514 -> ETH_FRAME_LEN
>
> 4 -> VLAN_HLEN
OK
>
> Does this device support stacked VLAN?
I am not familiar with stacked VLAN.
Our HW for sure there is no support. can the SW stack handle it for me?
Does it mean that the packets can be larger?
>
> Is this really the device maximum?
The device can support upto 64KB, but of course I will not allocate
for each RX data such a big buffer.
Can I know what is the maximum value the network stack may request? I
saw many driver allocating 1536 for each packet.
>
> > +#define MAX_PACKET_SIZE_W_CRC (MAX_PACKET_SIZE + 4) /* 1518 */
>
> 4 -> ETH_FCS_LEN
OK
>
> > +#if defined CONFIG_NPCM7XX_EMC_ETH_DEBUG || defined CONFIG_DEBUG_FS
> > +#define REG_PRINT(reg_name) {t = scnprintf(next, size, "%-10s = %08X\n", \
> > + #reg_name, readl(ether->reg + (reg_name))); size -= t; next += t; }
> > +#define DUMP_PRINT(f, x...) {t = scnprintf(next, size, f, ## x); size -= t; \
> > + next += t; }
> > +
> > +static int npcm7xx_info_dump(char *buf, int count, struct net_device *netdev)
> > +{
> > + struct npcm7xx_ether *ether = netdev_priv(netdev);
> > + struct npcm7xx_txbd *txbd;
> > + struct npcm7xx_rxbd *rxbd;
> > + unsigned long flags;
> > + unsigned int i, cur, txd_offset, rxd_offset;
> > + char *next = buf;
> > + unsigned int size = count;
> > + int t;
> > + int is_locked = spin_is_locked(ðer->lock);
> > +
> > + if (!is_locked)
> > + spin_lock_irqsave(ðer->lock, flags);
> > +
> > + /* ------basic driver information ---- */
> > + DUMP_PRINT("NPCM7XX EMC %s driver version: %s\n", netdev->name,
> > + DRV_MODULE_VERSION);
> > +
> > + REG_PRINT(REG_CAMCMR);
> > + REG_PRINT(REG_CAMEN);
> > + REG_PRINT(REG_CAMM_BASE);
> > + REG_PRINT(REG_CAML_BASE);
> > + REG_PRINT(REG_TXDLSA);
> > + REG_PRINT(REG_RXDLSA);
> > + REG_PRINT(REG_MCMDR);
> > + REG_PRINT(REG_MIID);
> > + REG_PRINT(REG_MIIDA);
> > + REG_PRINT(REG_FFTCR);
> > + REG_PRINT(REG_TSDR);
> > + REG_PRINT(REG_RSDR);
> > + REG_PRINT(REG_DMARFC);
> > + REG_PRINT(REG_MIEN);
> > + REG_PRINT(REG_MISTA);
> > + REG_PRINT(REG_MGSTA);
> > + REG_PRINT(REG_MPCNT);
> > + writel(0x7FFF, (ether->reg + REG_MPCNT));
> > + REG_PRINT(REG_MRPC);
> > + REG_PRINT(REG_MRPCC);
> > + REG_PRINT(REG_MREPC);
> > + REG_PRINT(REG_DMARFS);
> > + REG_PRINT(REG_CTXDSA);
> > + REG_PRINT(REG_CTXBSA);
> > + REG_PRINT(REG_CRXDSA);
> > + REG_PRINT(REG_CRXBSA);
> > + REG_PRINT(REG_RXFSM);
> > + REG_PRINT(REG_TXFSM);
> > + REG_PRINT(REG_FSM0);
> > + REG_PRINT(REG_FSM1);
> > + REG_PRINT(REG_DCR);
> > + REG_PRINT(REG_DMMIR);
> > + REG_PRINT(REG_BISTR);
> > + DUMP_PRINT("\n");
> > +
> > + DUMP_PRINT("netif_queue %s\n\n", netif_queue_stopped(netdev) ?
> > + "Stopped" : "Running");
> > + if (ether->rdesc)
> > + DUMP_PRINT("napi is %s\n\n", test_bit(NAPI_STATE_SCHED,
> > + ðer->napi.state) ?
> > + "scheduled" :
> > + "not scheduled");
> > +
> > + txd_offset = (readl((ether->reg + REG_CTXDSA)) -
> > + readl((ether->reg + REG_TXDLSA))) /
> > + sizeof(struct npcm7xx_txbd);
> > + DUMP_PRINT("TXD offset %6d\n", txd_offset);
> > + DUMP_PRINT("cur_tx %6d\n", ether->cur_tx);
> > + DUMP_PRINT("finish_tx %6d\n", ether->finish_tx);
> > + DUMP_PRINT("pending_tx %6d\n", ether->pending_tx);
> > + /* debug counters */
> > + DUMP_PRINT("tx_tdu %6d\n", ether->tx_tdu);
> > + ether->tx_tdu = 0;
> > + DUMP_PRINT("tx_tdu_i %6d\n", ether->tx_tdu_i);
> > + ether->tx_tdu_i = 0;
> > + DUMP_PRINT("tx_cp_i %6d\n", ether->tx_cp_i);
> > + ether->tx_cp_i = 0;
> > + DUMP_PRINT("tx_int_count %6d\n", ether->tx_int_count);
> > + ether->tx_int_count = 0;
> > + DUMP_PRINT("count_xmit tx %6d\n", ether->count_xmit);
> > + ether->count_xmit = 0;
> > + DUMP_PRINT("count_finish %6d\n", ether->count_finish);
> > + ether->count_finish = 0;
> > + DUMP_PRINT("\n");
> > +
> > + rxd_offset = (readl((ether->reg + REG_CRXDSA)) -
> > + readl((ether->reg + REG_RXDLSA)))
> > + / sizeof(struct npcm7xx_txbd);
> > + DUMP_PRINT("RXD offset %6d\n", rxd_offset);
> > + DUMP_PRINT("cur_rx %6d\n", ether->cur_rx);
> > + DUMP_PRINT("rx_err %6d\n", ether->rx_err);
> > + ether->rx_err = 0;
> > + DUMP_PRINT("rx_berr %6d\n", ether->rx_berr);
> > + ether->rx_berr = 0;
> > + DUMP_PRINT("rx_stuck %6d\n", ether->rx_stuck);
> > + ether->rx_stuck = 0;
> > + DUMP_PRINT("rdu %6d\n", ether->rdu);
> > + ether->rdu = 0;
> > + DUMP_PRINT("rxov rx %6d\n", ether->rxov);
> > + ether->rxov = 0;
> > + /* debug counters */
> > + DUMP_PRINT("rx_int_count %6d\n", ether->rx_int_count);
> > + ether->rx_int_count = 0;
> > + DUMP_PRINT("rx_err_count %6d\n", ether->rx_err_count);
> > + ether->rx_err_count = 0;
>
> Basic counters like tx_packets and rx_errors are probably better
> exported regardless of debug level as net_device_stats. And then don't
> need to be copied in debug output.
They are also exported there, see below ether->stats.tx_packets++; and
ether->stats.rx_errors++;
those are different counters for debug since we had HW issues that we
needed to workaround and might need them for future use.
Currently the driver is stable on millions of parts in the field.
>
> Less standard counters like tx interrupt count are probably better
> candidates for ethtool -S.
I don't have support for ethtool.
is it a must? it is quite some work and this driver is already in the
field for quite some years.
>
> > +#ifdef CONFIG_NPCM7XX_EMC_ETH_DEBUG
> > +static void npcm7xx_info_print(struct net_device *netdev)
> > +{
> > + char *emc_dump_buf;
> > + int count;
> > + struct npcm7xx_ether *ether;
> > + struct platform_device *pdev;
> > + char c;
> > + char *tmp_buf;
> > + const size_t print_size = 5 * PAGE_SIZE;
I will change print_size to 0x5000 since PAGE_SIZE is not a fixed
value on all arch.
> > +
> > + ether = netdev_priv(netdev);
> > + pdev = ether->pdev;
> > +
> > + emc_dump_buf = kmalloc(print_size, GFP_KERNEL);
> > + if (!emc_dump_buf)
> > + return;
> > +
> > + tmp_buf = emc_dump_buf;
> > + count = ether->stats.rx_errors++;(emc_dump_buf, print_size, netdev);
> > + while (count > 512) {
> > + c = tmp_buf[512];
> > + tmp_buf[512] = 0;
> > + dev_info(&pdev->dev, "%s", tmp_buf);
> > + tmp_buf += 512;
> > + tmp_buf[0] = c;
> > + count -= 512;
>
> Missing closing parenthesis.
WOW! good catch, before submitting I made few change due to
checkpatch.pl and didn't compile with CONFIG_NPCM7XX_EMC_ETH_DEBUG
>
> Also, why this buffering to printk?
I prepare the buffer in advance for real-time reasons because of the
lock in order to get a correct snapshot of the registers.
The buffer is big and I saw that printk has limited length so I split it.
>
> > +static void npcm7xx_write_cam(struct net_device *netdev,
> > + unsigned int x, unsigned char *pval)
> > +{
> > + struct npcm7xx_ether *ether = netdev_priv(netdev);
> > + __le32 msw, lsw;
> > +
> > + msw = (pval[0] << 24) | (pval[1] << 16) | (pval[2] << 8) | pval[3];
> > +
> > + lsw = (pval[4] << 24) | (pval[5] << 16);
>
> Does __le32 plus this explicit shifting define host endianness? Better
> to keep independent?
OK
>
> > +
> > + writel(lsw, (ether->reg + REG_CAML_BASE) + x * CAM_ENTRY_SIZE);
> > + writel(msw, (ether->reg + REG_CAMM_BASE) + x * CAM_ENTRY_SIZE);
> > + dev_dbg(ðer->pdev->dev,
> > + "REG_CAML_BASE = 0x%08X REG_CAMM_BASE = 0x%08X", lsw, msw);
> > +}
> > +
> > +static struct sk_buff *get_new_skb(struct net_device *netdev, u32 i)
> > +{
> > + __le32 buffer;
> > + struct npcm7xx_ether *ether = netdev_priv(netdev);
> > + struct sk_buff *skb = netdev_alloc_skb(netdev,
> > + roundup(MAX_PACKET_SIZE_W_CRC, 4));
> > +
> > + if (unlikely(!skb)) {
> > + if (net_ratelimit())
> > + netdev_warn(netdev, "failed to allocate rx skb\n");
>
> can use net_warn_ratelimited (here and elsewhere)
should I replace every netdev_warn/err/info with net_warn/err/inf_ratelimited?
I saw in drivers that are using net_warn_ratelimited, that many time
uses also netdev_warn/err/info
>
> > + buffer = ether->rx_scratch_dma;
> > + } else {
> > + /* Do not unmark the following skb_reserve() Receive Buffer
> > + * Starting Address must be aligned to 4 bytes and the following
> > + * line if unmarked will make it align to 2 and this likely will
> > + * hult the RX and crash the linux
>
> halt?
will fix typo.
>
> > + * skb_reserve(skb, NET_IP_ALIGN);
> > + */
> > + skb->dev = netdev;
> > + buffer = dma_map_single(&netdev->dev,
> > + skb->data,
> > + roundup(MAX_PACKET_SIZE_W_CRC, 4),
> > + DMA_FROM_DEVICE);
> > + if (unlikely(dma_mapping_error(&netdev->dev, buffer))) {
> > + if (net_ratelimit())
> > + netdev_err(netdev, "failed to map rx page\n");
> > + dev_kfree_skb_any(skb);
> > + buffer = ether->rx_scratch_dma;
> > + skb = NULL;
> > + }
> > + }
> > + ether->rx_skb[i] = skb;
> > + ether->rdesc[i].buffer = buffer;
> > +
> > + return skb;
> > +}
> > +
>
> > +static int npcm7xx_ether_close(struct net_device *netdev)
> > +{
> > + struct npcm7xx_ether *ether = netdev_priv(netdev);
> > +
> > + npcm7xx_return_default_idle(netdev);
> > +
> > + if (ether->phy_dev)
> > + phy_stop(ether->phy_dev);
> > + else if (ether->use_ncsi)
> > + ncsi_stop_dev(ether->ncsidev);
> > +
> > + msleep(20);
> > +
> > + free_irq(ether->txirq, netdev);
> > + free_irq(ether->rxirq, netdev);
> > +
> > + netif_stop_queue(netdev);
> > + napi_disable(ðer->napi);
>
> Cleanup state in reverse of allocation.
OK
>
> > +static int npcm7xx_ether_start_xmit(struct sk_buff *skb, struct net_device *netdev)
> > +{
> > + struct npcm7xx_ether *ether = netdev_priv(netdev);
> > + struct npcm7xx_txbd *txbd;
> > + unsigned long flags;
> > +
> > + ether->count_xmit++;
> > +
> > + /* Insert new buffer */
> > + txbd = (ether->tdesc + ether->cur_tx);
> > + txbd->buffer = dma_map_single(&netdev->dev, skb->data, skb->len,
> > + DMA_TO_DEVICE);
> > + ether->tx_skb[ether->cur_tx] = skb;
> > + if (skb->len > MAX_PACKET_SIZE)
> > + dev_err(ðer->pdev->dev,
> > + "skb->len (= %d) > MAX_PACKET_SIZE (= %d)\n",
> > + skb->len, MAX_PACKET_SIZE);
>
> > + txbd->sl = skb->len > MAX_PACKET_SIZE ? MAX_PACKET_SIZE : skb->len;
>
> Check for errors before mapping to device, and drop packet? Probably
> don't want to output truncated packets.
>
> Also rate limit such messages.
OK
>
> > + dma_wmb();
> > +
> > + txbd->mode = TX_OWN_DMA | PADDINGMODE | CRCMODE;
> > +
> > + /* make sure that data is in memory before we trigger TX */
> > + wmb();
> > +
> > + /* trigger TX */
> > + writel(ENSTART, (ether->reg + REG_TSDR));
> > +
> > + if (++ether->cur_tx >= TX_QUEUE_LEN)
> > + ether->cur_tx = 0;
> > +
> > + spin_lock_irqsave(ðer->lock, flags);
> > + ether->pending_tx++;
> > +
> > + /* sometimes we miss the tx interrupt due to HW issue, so NAPI will not
> > + * clean the pending tx, so we clean it also here
> > + */
> > + npcm7xx_clean_tx(netdev, true);
> > +
> > + if (ether->pending_tx >= TX_QUEUE_LEN - 1) {
> > + __le32 reg_mien;
> > + unsigned int index_to_wake = ether->cur_tx +
> > + ((TX_QUEUE_LEN * 3) / 4);
> > +
> > + if (index_to_wake >= TX_QUEUE_LEN)
> > + index_to_wake -= TX_QUEUE_LEN;
> > +
> > + txbd = (ether->tdesc + index_to_wake);
> > + txbd->mode = TX_OWN_DMA | PADDINGMODE | CRCMODE | MACTXINTEN;
> > +
> > + /* make sure that data is in memory before we trigger TX */
> > + wmb();
> > +
> > + /* Clear TDU interrupt */
> > + writel(MISTA_TDU, (ether->reg + REG_MISTA));
> > +
> > + /* due to HW issue somtimes, we miss the TX interrupt we just
>
> somtimes -> sometimes
OK
>
> > + * set (MACTXINTEN), so we also set TDU for Transmit
> > + * Descriptor Unavailable interrupt
> > + */
> > + reg_mien = readl((ether->reg + REG_MIEN));
> > + if (reg_mien != 0)
> > + /* Enable TDU interrupt */
> > + writel(reg_mien | ENTDU, (ether->reg + REG_MIEN));
> > +
> > + ether->tx_tdu++;
> > + netif_stop_queue(netdev);
> > + }
> > +
> > + spin_unlock_irqrestore(ðer->lock, flags);
> > +
> > + return 0;
> > +}
> > +
> > +static irqreturn_t npcm7xx_tx_interrupt(int irq, void *dev_id)
> > +{
> > + struct npcm7xx_ether *ether;
> > + struct platform_device *pdev;
> > + struct net_device *netdev;
> > + __le32 status;
> > + unsigned long flags;
> > +
> > + netdev = dev_id;
> > + ether = netdev_priv(netdev);
> > + pdev = ether->pdev;
> > +
> > + npcm7xx_get_and_clear_int(netdev, &status, 0xFFFF0000);
> > +
> > + ether->tx_int_count++;
> > +
> > + if (status & MISTA_EXDEF)
> > + dev_err(&pdev->dev, "emc defer exceed interrupt status=0x%08X\n"
> > + , status);
> > + else if (status & MISTA_TXBERR) {
> > + dev_err(&pdev->dev, "emc bus error interrupt status=0x%08X\n",
> > + status);
> > +#ifdef CONFIG_NPCM7XX_EMC_ETH_DEBUG
> > + npcm7xx_info_print(netdev);
> > +#endif
> > + spin_lock_irqsave(ðer->lock, flags);
>
> irqsave in hard interrupt context?
I need to protect my REG_MIEN register that is changed in other places.
I think that spin_lock_irqsave() is relevant when working in SMP,
since other CPU may still be running.
Isn't it?
>
> > + writel(0, (ether->reg + REG_MIEN)); /* disable any interrupt */
> > + spin_unlock_irqrestore(ðer->lock, flags);
> > + ether->need_reset = 1;
> > + } else if (status & ~(MISTA_TXINTR | MISTA_TXCP | MISTA_TDU))
> > + dev_err(&pdev->dev, "emc other error interrupt status=0x%08X\n",
> > + status);
> > +
> > + /* if we got MISTA_TXCP | MISTA_TDU remove those interrupt and call napi */
>
> The goal of napi is to keep interrupts disabled until napi completes.
We have a HW issue that because of it I still enabled TX complete interrupt,
I will see if I can disable all interrupts and only leave the error interrupts
>
> > + if (status & (MISTA_TXCP | MISTA_TDU) &
> > + readl((ether->reg + REG_MIEN))) {
> > + __le32 reg_mien;
> > +
> > + spin_lock_irqsave(ðer->lock, flags);
> > + reg_mien = readl((ether->reg + REG_MIEN));
> > + if (reg_mien & ENTDU)
> > + /* Disable TDU interrupt */
> > + writel(reg_mien & (~ENTDU), (ether->reg + REG_MIEN));
> > +
> > + spin_unlock_irqrestore(ðer->lock, flags);
> > +
> > + if (status & MISTA_TXCP)
> > + ether->tx_cp_i++;
> > + if (status & MISTA_TDU)
> > + ether->tx_tdu_i++;
> > + } else {
> > + dev_dbg(&pdev->dev, "status=0x%08X\n", status);
> > + }
> > +
> > + napi_schedule(ðer->napi);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t npcm7xx_rx_interrupt(int irq, void *dev_id)
> > +{
> > + struct net_device *netdev = (struct net_device *)dev_id;
> > + struct npcm7xx_ether *ether = netdev_priv(netdev);
> > + struct platform_device *pdev = ether->pdev;
> > + __le32 status;
> > + unsigned long flags;
> > + unsigned int any_err = 0;
> > + __le32 rxfsm;
> > +
> > + npcm7xx_get_and_clear_int(netdev, &status, 0xFFFF);
>
> Same here
in non error case I do leave only the error interrupts and schedule napi.
>
> > +static int npcm7xx_poll(struct napi_struct *napi, int budget)
> > +{
> > + struct npcm7xx_ether *ether =
> > + container_of(napi, struct npcm7xx_ether, napi);
> > + struct npcm7xx_rxbd *rxbd;
> > + struct net_device *netdev = ether->netdev;
> > + struct platform_device *pdev = ether->pdev;
> > + struct sk_buff *s;
> > + unsigned int length;
> > + __le32 status;
> > + unsigned long flags;
> > + int rx_cnt = 0;
> > + int complete = 0;
> > + unsigned int rx_offset = (readl((ether->reg + REG_CRXDSA)) -
> > + ether->start_rx_ptr) /
> > + sizeof(struct npcm7xx_txbd);
> > + unsigned int local_count = (rx_offset >= ether->cur_rx) ?
> > + rx_offset - ether->cur_rx : rx_offset +
> > + RX_QUEUE_LEN - ether->cur_rx;
> > +
> > + if (local_count > ether->max_waiting_rx)
> > + ether->max_waiting_rx = local_count;
> > +
> > + if (local_count > (4 * RX_POLL_SIZE))
> > + /* we are porbably in a storm of short packets and we don't
>
> porbably - probably
OK
>
> > + * want to get into RDU since short packets in RDU cause
> > + * many RXOV which may cause EMC halt, so we filter out all
> > + * coming packets
> > + */
> > + writel(0, (ether->reg + REG_CAMCMR));
> > +
> > + if (local_count <= budget)
> > + /* we can restore accepting of packets */
> > + writel(ether->camcmr, (ether->reg + REG_CAMCMR));
> > +
> > + spin_lock_irqsave(ðer->lock, flags);
> > + npcm7xx_clean_tx(netdev, false);
> > + spin_unlock_irqrestore(ðer->lock, flags);
> > +
> > + rxbd = (ether->rdesc + ether->cur_rx);
> > +
> > + while (rx_cnt < budget) {
> > + status = rxbd->sl;
> > + if ((status & RX_OWN_DMA) == RX_OWN_DMA) {
> > + complete = 1;
> > + break;
> > + }
> > + /* for debug puposes we save the previous value */
>
> puposes -> purposes
OK
>
> > + rxbd->reserved = status;
> > + s = ether->rx_skb[ether->cur_rx];
> > + length = status & 0xFFFF;
> > +
> > + /* If VLAN is not supporte RXDS_PTLE (packet too long) is also
>
> supporte -> supported (stopping pointing out typos after this).
OK will review rest
>
> > +static const struct net_device_ops npcm7xx_ether_netdev_ops = {
> > + .ndo_open = npcm7xx_ether_open,
> > + .ndo_stop = npcm7xx_ether_close,
> > + .ndo_start_xmit = npcm7xx_ether_start_xmit,
> > + .ndo_get_stats = npcm7xx_ether_stats,
> > + .ndo_set_rx_mode = npcm7xx_ether_set_rx_mode,
> > + .ndo_set_mac_address = npcm7xx_set_mac_address,
> > + .ndo_do_ioctl = npcm7xx_ether_ioctl,
> > + .ndo_validate_addr = eth_validate_addr,
> > + .ndo_change_mtu = eth_change_mtu,
>
> This is marked as deprecated. Also in light of the hardcoded
> MAX_PACKET_SIZE, probably want to set dev->max_mtu.
can I just not set .ndo_change_mtu? or I must add my own implementation?
setting of dev->max_mtu, can be done in probe, yes?
BTW, I see that currently the mtu is 1500 but I do get transactions
with len of 1514 (I didn't compile with VLAN)
>
> > +static int npcm7xx_ether_probe(struct platform_device *pdev)
> > +{
> > + struct npcm7xx_ether *ether;
> > + struct net_device *netdev;
> > + int error;
> > +
> > + struct clk *emc_clk = NULL;
> > + struct device_node *np = pdev->dev.of_node;
> > +
> > + pdev->id = of_alias_get_id(np, "ethernet");
> > + if (pdev->id < 0)
> > + pdev->id = 0;
> > +
> > + emc_clk = devm_clk_get(&pdev->dev, NULL);
> > +
> > + if (IS_ERR(emc_clk))
> > + return PTR_ERR(emc_clk);
> > +
> > + /* Enable Clock */
> > + clk_prepare_enable(emc_clk);
> > +
> > + error = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
> > + if (error)
> > + return -ENODEV;
> > +
> > + netdev = alloc_etherdev(sizeof(struct npcm7xx_ether));
> > + if (!netdev)
> > + return -ENOMEM;
> > +
> > + ether = netdev_priv(netdev);
> > +
> > + ether->reset = devm_reset_control_get(&pdev->dev, NULL);
> > + if (IS_ERR(ether->reset))
> > + return PTR_ERR(ether->reset);
>
> Memory leak on error path
>
> Also missing netif_napi_del in npcm7xx_ether_remove?
added
--
Regards,
Avi
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v1 2/2] net: npcm: add NPCM7xx EMC 10/100 Ethernet driver
2019-08-06 13:19 ` Avi Fishman
@ 2019-08-06 22:51 ` Willem de Bruijn
0 siblings, 0 replies; 8+ messages in thread
From: Willem de Bruijn @ 2019-08-06 22:51 UTC (permalink / raw)
To: Avi Fishman
Cc: Patrick Venture, Nancy Yuen, Benjamin Fair, David Miller,
Rob Herring, Mark Rutland, Greg Kroah-Hartman, Tomer Maimon,
Tali Perry, OpenBMC Maillist, Network Development, devicetree,
linux-kernel, Thomas Gleixner
> > Does this device support stacked VLAN?
> I am not familiar with stacked VLAN.
> Our HW for sure there is no support. can the SW stack handle it for me?
> Does it mean that the packets can be larger?
If the device does not support it, I believe it's fine to leave it to S/W.
> > Is this really the device maximum?
>
> The device can support upto 64KB, but of course I will not allocate
> for each RX data such a big buffer.
> Can I know what is the maximum value the network stack may request? I
> saw many driver allocating 1536 for each packet.
The maximum is the minimum of the link layer and device h/w limits,
but you indeed don't want to allocate for worst case if that is highly
unlikely.
Your choice of 1500 is fine for this initial commit, really. More on
MTU below with ndo_change_mtu
> > > + rxd_offset = (readl((ether->reg + REG_CRXDSA)) -
> > > + readl((ether->reg + REG_RXDLSA)))
> > > + / sizeof(struct npcm7xx_txbd);
> > > + DUMP_PRINT("RXD offset %6d\n", rxd_offset);
> > > + DUMP_PRINT("cur_rx %6d\n", ether->cur_rx);
> > > + DUMP_PRINT("rx_err %6d\n", ether->rx_err);
> > > + ether->rx_err = 0;
> > > + DUMP_PRINT("rx_berr %6d\n", ether->rx_berr);
> > > + ether->rx_berr = 0;
> > > + DUMP_PRINT("rx_stuck %6d\n", ether->rx_stuck);
> > > + ether->rx_stuck = 0;
> > > + DUMP_PRINT("rdu %6d\n", ether->rdu);
> > > + ether->rdu = 0;
> > > + DUMP_PRINT("rxov rx %6d\n", ether->rxov);
> > > + ether->rxov = 0;
> > > + /* debug counters */
> > > + DUMP_PRINT("rx_int_count %6d\n", ether->rx_int_count);
> > > + ether->rx_int_count = 0;
> > > + DUMP_PRINT("rx_err_count %6d\n", ether->rx_err_count);
> > > + ether->rx_err_count = 0;
> >
> > Basic counters like tx_packets and rx_errors are probably better
> > exported regardless of debug level as net_device_stats. And then don't
> > need to be copied in debug output.
>
> They are also exported there, see below ether->stats.tx_packets++; and
> ether->stats.rx_errors++;
> those are different counters for debug since we had HW issues that we
> needed to workaround and might need them for future use.
> Currently the driver is stable on millions of parts in the field.
>
> >
> > Less standard counters like tx interrupt count are probably better
> > candidates for ethtool -S.
>
> I don't have support for ethtool.
> is it a must? it is quite some work and this driver is already in the
> field for quite some years.
Your driver includes a struct ethtool_ops. Implementing its callback
.get_ethtool_stats seems straightforward?
David also requested using standard infrastructure over this custom
debug logic. Ethool stats appear the most logical choice to me. But
there may be others.
> > > +static struct sk_buff *get_new_skb(struct net_device *netdev, u32 i)
> > > +{
> > > + __le32 buffer;
> > > + struct npcm7xx_ether *ether = netdev_priv(netdev);
> > > + struct sk_buff *skb = netdev_alloc_skb(netdev,
> > > + roundup(MAX_PACKET_SIZE_W_CRC, 4));
> > > +
> > > + if (unlikely(!skb)) {
> > > + if (net_ratelimit())
> > > + netdev_warn(netdev, "failed to allocate rx skb\n");
> >
> > can use net_warn_ratelimited (here and elsewhere)
>
> should I replace every netdev_warn/err/info with net_warn/err/inf_ratelimited?
> I saw in drivers that are using net_warn_ratelimited, that many time
> uses also netdev_warn/err/info
They probably use the second in non-ratelimited cases?
> > > +static irqreturn_t npcm7xx_tx_interrupt(int irq, void *dev_id)
> > > +{
> > > + struct npcm7xx_ether *ether;
> > > + struct platform_device *pdev;
> > > + struct net_device *netdev;
> > > + __le32 status;
> > > + unsigned long flags;
> > > +
> > > + netdev = dev_id;
> > > + ether = netdev_priv(netdev);
> > > + pdev = ether->pdev;
> > > +
> > > + npcm7xx_get_and_clear_int(netdev, &status, 0xFFFF0000);
> > > +
> > > + ether->tx_int_count++;
> > > +
> > > + if (status & MISTA_EXDEF)
> > > + dev_err(&pdev->dev, "emc defer exceed interrupt status=0x%08X\n"
> > > + , status);
> > > + else if (status & MISTA_TXBERR) {
> > > + dev_err(&pdev->dev, "emc bus error interrupt status=0x%08X\n",
> > > + status);
> > > +#ifdef CONFIG_NPCM7XX_EMC_ETH_DEBUG
> > > + npcm7xx_info_print(netdev);
> > > +#endif
> > > + spin_lock_irqsave(ðer->lock, flags);
> >
> > irqsave in hard interrupt context?
>
> I need to protect my REG_MIEN register that is changed in other places.
> I think that spin_lock_irqsave() is relevant when working in SMP,
> since other CPU may still be running.
> Isn't it?
This is an interesting case. The hardware interrupt handler will not
interrupt itself. But it is architecture dependent whether all
interrupts are disabled when a particular interrupt handler is running
(as per the unreliable guide to locking).
So even in absence of SMP, this would indeed need spin_lock_irqsave if
there are multiple hardware interrupt handlers potentially accessing
the same data. That sounds unlikely in general, but does happen here
for REG_MIEN, in npcm7xx_tx_interrupt and npcm7xx_rx_interrupt. So I
was mistaken, this is not only the most conservative locking method,
it is indeed required.
>
> >
> > > + writel(0, (ether->reg + REG_MIEN)); /* disable any interrupt */
> > > + spin_unlock_irqrestore(ðer->lock, flags);
> > > + ether->need_reset = 1;
> > > + } else if (status & ~(MISTA_TXINTR | MISTA_TXCP | MISTA_TDU))
> > > + dev_err(&pdev->dev, "emc other error interrupt status=0x%08X\n",
> > > + status);
> > > +
> > > + /* if we got MISTA_TXCP | MISTA_TDU remove those interrupt and call napi */
> >
> > The goal of napi is to keep interrupts disabled until napi completes.
>
> We have a HW issue that because of it I still enabled TX complete interrupt,
> I will see if I can disable all interrupts and only leave the error interrupts
Please do. I'm not sure what happens when trying to schedule napi
while it is already scheduled or running. Even in the best case
(nothing), these spurious interrupts are inefficient.
> >
> > > + if (status & (MISTA_TXCP | MISTA_TDU) &
> > > + readl((ether->reg + REG_MIEN))) {
> > > + __le32 reg_mien;
> > > +
> > > + spin_lock_irqsave(ðer->lock, flags);
> > > + reg_mien = readl((ether->reg + REG_MIEN));
> > > + if (reg_mien & ENTDU)
> > > + /* Disable TDU interrupt */
> > > + writel(reg_mien & (~ENTDU), (ether->reg + REG_MIEN));
> > > +
> > > + spin_unlock_irqrestore(ðer->lock, flags);
> > > +
> > > + if (status & MISTA_TXCP)
> > > + ether->tx_cp_i++;
> > > + if (status & MISTA_TDU)
> > > + ether->tx_tdu_i++;
> > > + } else {
> > > + dev_dbg(&pdev->dev, "status=0x%08X\n", status);
> > > + }
> > > +
> > > + napi_schedule(ðer->napi);
> > > +
> > > + return IRQ_HANDLED;
> > > +}
> > > +
> > > +static irqreturn_t npcm7xx_rx_interrupt(int irq, void *dev_id)
> > > +{
> > > + struct net_device *netdev = (struct net_device *)dev_id;
> > > + struct npcm7xx_ether *ether = netdev_priv(netdev);
> > > + struct platform_device *pdev = ether->pdev;
> > > + __le32 status;
> > > + unsigned long flags;
> > > + unsigned int any_err = 0;
> > > + __le32 rxfsm;
> > > +
> > > + npcm7xx_get_and_clear_int(netdev, &status, 0xFFFF);
> >
> > Same here
>
> in non error case I do leave only the error interrupts and schedule napi.
Oh, so the Rx interrupt remains suppressed. Then that's fine.
> > > +static const struct net_device_ops npcm7xx_ether_netdev_ops = {
> > > + .ndo_open = npcm7xx_ether_open,
> > > + .ndo_stop = npcm7xx_ether_close,
> > > + .ndo_start_xmit = npcm7xx_ether_start_xmit,
> > > + .ndo_get_stats = npcm7xx_ether_stats,
> > > + .ndo_set_rx_mode = npcm7xx_ether_set_rx_mode,
> > > + .ndo_set_mac_address = npcm7xx_set_mac_address,
> > > + .ndo_do_ioctl = npcm7xx_ether_ioctl,
> > > + .ndo_validate_addr = eth_validate_addr,
> > > + .ndo_change_mtu = eth_change_mtu,
> >
> > This is marked as deprecated. Also in light of the hardcoded
> > MAX_PACKET_SIZE, probably want to set dev->max_mtu.
>
> can I just not set .ndo_change_mtu? or I must add my own implementation?
> setting of dev->max_mtu, can be done in probe, yes?
It's fine to just not have it. The patchset that introduced max_mtu
(61e84623ace3, a52ad514fdf3) removed many.
One reason to have a callback function is to bring the device down/up
with different sized rx buffers.
But handling that might be too much extra complexity for the initial
patch. It's fine to keep the fixed rx alloc size as is.
> BTW, I see that currently the mtu is 1500 but I do get transactions
> with len of 1514 (I didn't compile with VLAN)
That is to be expected, as MTU excludes link layer header (and FCS,
and perhaps also vlan?)
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v1 1/2] dt-binding: net: document NPCM7xx EMC 10/100 DT bindings
2019-08-01 7:26 ` [PATCH v1 1/2] dt-binding: net: document NPCM7xx EMC 10/100 DT bindings Avi Fishman
@ 2019-08-21 18:33 ` Rob Herring
0 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2019-08-21 18:33 UTC (permalink / raw)
To: Avi Fishman
Cc: venture, yuenn, benjaminfair, davem, mark.rutland, gregkh,
tmaimon77, tali.perry1, openbmc, netdev, devicetree,
linux-kernel, tglx
On Thu, Aug 01, 2019 at 10:26:10AM +0300, Avi Fishman wrote:
> Added device tree binding documentation for
> Nuvoton NPCM7xx Ethernet MAC Controller (EMC) 10/100 RMII
>
> Signed-off-by: Avi Fishman <avifishman70@gmail.com>
> ---
> .../bindings/net/nuvoton,npcm7xx-emc.txt | 38 +++++++++++++++++++
> 1 file changed, 38 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/nuvoton,npcm7xx-emc.txt
Consider converting this to DT schema (YAML).
>
> diff --git a/Documentation/devicetree/bindings/net/nuvoton,npcm7xx-emc.txt b/Documentation/devicetree/bindings/net/nuvoton,npcm7xx-emc.txt
> new file mode 100644
> index 000000000000..a7ac3ca66de9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/nuvoton,npcm7xx-emc.txt
> @@ -0,0 +1,38 @@
> +Nuvoton NPCM7XX 10/100 Ethernet MAC Controller (EMC)
> +
> +The NPCM7XX provides one or two Ethernet MAC RMII Controllers
> +for WAN/LAN applications
> +
> +Required properties:
> +- device_type : Should be "network"
Drop this. device_type is deprecated for FDT except for a few cases.
> +- compatible : "nuvoton,npcm750-emc" for Poleg NPCM7XX.
> +- reg : Offset and length of the register set for the device.
> +- interrupts : Contain the emc interrupts with flags for falling edge.
> + first interrupt dedicated to Txirq
> + second interrupt dedicated to Rxirq
> +- phy-mode : Should be "rmii" (see ethernet.txt in the same directory)
> +- clocks : phandle of emc reference clock.
> +- resets : phandle to the reset control for this device.
> +- use-ncsi : Use the NC-SI stack instead of an MDIO PHY
Vendor prefix needed.
> +
> +Example:
> +
> +emc0: eth@f0825000 {
ethernet@...
> + device_type = "network";
> + compatible = "nuvoton,npcm750-emc";
> + reg = <0xf0825000 0x1000>;
> + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> + phy-mode = "rmii";
> + clocks = <&clk NPCM7XX_CLK_AHB>;
> +
> + #use-ncsi; /* add this to support ncsi */
Doesn't match the binding.
> +
> + clock-names = "clk_emc";
> + resets = <&rstc 6>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&r1_pins
> + &r1err_pins
> + &r1md_pins>;
> + status = "okay";
Drop status in examples.
> +};
> --
> 2.18.0
>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-08-21 18:33 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-01 7:26 [PATCH v1 0/2] add NPCM7xx EMC 10/100 Ethernet driver Avi Fishman
2019-08-01 7:26 ` [PATCH v1 1/2] dt-binding: net: document NPCM7xx EMC 10/100 DT bindings Avi Fishman
2019-08-21 18:33 ` Rob Herring
2019-08-01 7:26 ` [PATCH v1 2/2] net: npcm: add NPCM7xx EMC 10/100 Ethernet driver Avi Fishman
2019-08-01 16:27 ` David Miller
2019-08-01 17:25 ` Willem de Bruijn
2019-08-06 13:19 ` Avi Fishman
2019-08-06 22:51 ` Willem de Bruijn
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).