linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <Tudor.Ambarus@microchip.com>
To: <boris.brezillon@collabora.com>, <marek.vasut@gmail.com>,
	<vigneshr@ti.com>, <miquel.raynal@bootlin.com>, <richard@nod.at>,
	<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>
Cc: <boris.brezillon@bootlin.com>, <Tudor.Ambarus@microchip.com>
Subject: [PATCH v2 3/6] mtd: spi-nor: Add a ->convert_addr() method
Date: Sat, 24 Aug 2019 12:07:13 +0000	[thread overview]
Message-ID: <20190824120650.14752-4-tudor.ambarus@microchip.com> (raw)
In-Reply-To: <20190824120650.14752-1-tudor.ambarus@microchip.com>

From: Boris Brezillon <boris.brezillon@bootlin.com>

In order to separate manufacturer quirks from the core we need to get
rid of all the manufacturer specific flags, like the
SNOR_F_S3AN_ADDR_DEFAULT one.

This can easily be replaced by a ->convert_addr() hook, which when
implemented will provide the core with an easy way to convert an
absolute address into something the flash understands.

Right now the only user are the S3AN chips, but other manufacturers
can implement it if needed.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/mtd/spi-nor/spi-nor.c | 24 ++++++++++++++----------
 include/linux/mtd/spi-nor.h   | 17 ++++++++++-------
 2 files changed, 24 insertions(+), 17 deletions(-)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index bd31d6529892..0dc6a683719e 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -899,10 +899,9 @@ static void spi_nor_unlock_and_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
  * Addr can safely be unsigned int, the biggest S3AN device is smaller than
  * 4 MiB.
  */
-static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr)
+static u32 s3an_convert_addr(struct spi_nor *nor, u32 addr)
 {
-	unsigned int offset;
-	unsigned int page;
+	u32 offset, page;
 
 	offset = addr % nor->page_size;
 	page = addr / nor->page_size;
@@ -911,6 +910,14 @@ static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr)
 	return page | offset;
 }
 
+static u32 spi_nor_convert_addr(struct spi_nor *nor, loff_t addr)
+{
+	if (!nor->params.convert_addr)
+		return addr;
+
+	return nor->params.convert_addr(nor, addr);
+}
+
 /*
  * Initiate the erasure of a single sector
  */
@@ -918,8 +925,7 @@ static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
 {
 	int i;
 
-	if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT)
-		addr = spi_nor_s3an_addr_convert(nor, addr);
+	addr = spi_nor_convert_addr(nor, addr);
 
 	if (nor->erase)
 		return nor->erase(nor, addr);
@@ -2535,8 +2541,7 @@ static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
 	while (len) {
 		loff_t addr = from;
 
-		if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT)
-			addr = spi_nor_s3an_addr_convert(nor, addr);
+		addr = spi_nor_convert_addr(nor, addr);
 
 		ret = spi_nor_read_data(nor, addr, len, buf);
 		if (ret == 0) {
@@ -2680,8 +2685,7 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
 		page_remain = min_t(size_t,
 				    nor->page_size - page_offset, len - i);
 
-		if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT)
-			addr = spi_nor_s3an_addr_convert(nor, addr);
+		addr = spi_nor_convert_addr(nor, addr);
 
 		write_enable(nor);
 		ret = spi_nor_write_data(nor, addr, page_remain, buf + i);
@@ -2748,7 +2752,7 @@ static int s3an_nor_scan(struct spi_nor *nor)
 		nor->mtd.erasesize = 8 * nor->page_size;
 	} else {
 		/* Flash in Default addressing mode */
-		nor->flags |= SNOR_F_S3AN_ADDR_DEFAULT;
+		nor->params.convert_addr = s3an_convert_addr;
 	}
 
 	return 0;
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 6c5eaf607b50..f9f1947f7aeb 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -237,13 +237,12 @@ enum spi_nor_option_flags {
 	SNOR_F_USE_FSR		= BIT(0),
 	SNOR_F_HAS_SR_TB	= BIT(1),
 	SNOR_F_NO_OP_CHIP_ERASE	= BIT(2),
-	SNOR_F_S3AN_ADDR_DEFAULT = BIT(3),
-	SNOR_F_READY_XSR_RDY	= BIT(4),
-	SNOR_F_USE_CLSR		= BIT(5),
-	SNOR_F_BROKEN_RESET	= BIT(6),
-	SNOR_F_4B_OPCODES	= BIT(7),
-	SNOR_F_HAS_4BAIT	= BIT(8),
-	SNOR_F_HAS_LOCK		= BIT(9),
+	SNOR_F_READY_XSR_RDY	= BIT(3),
+	SNOR_F_USE_CLSR		= BIT(4),
+	SNOR_F_BROKEN_RESET	= BIT(5),
+	SNOR_F_4B_OPCODES	= BIT(6),
+	SNOR_F_HAS_4BAIT	= BIT(7),
+	SNOR_F_HAS_LOCK		= BIT(8),
 };
 
 /**
@@ -496,6 +495,9 @@ struct spi_nor_locking_ops {
  *                      Table.
  * @quad_enable:	enables SPI NOR quad mode.
  * @set_4byte:		puts the SPI NOR in 4 byte addressing mode.
+ * @convert_addr:	converts an absolute address into something the flash
+ *                      will understand. Particularly useful when pagesize is
+ *                      not a power-of-2.
  * @disable_block_protection: disables block protection during power-up.
  * @locking_ops:	SPI NOR locking methods.
  */
@@ -511,6 +513,7 @@ struct spi_nor_flash_parameter {
 
 	int (*quad_enable)(struct spi_nor *nor);
 	int (*set_4byte)(struct spi_nor *nor, bool enable);
+	u32 (*convert_addr)(struct spi_nor *nor, u32 addr);
 	int (*disable_block_protection)(struct spi_nor *nor);
 
 	const struct spi_nor_locking_ops *locking_ops;
-- 
2.9.5


  parent reply	other threads:[~2019-08-24 12:07 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-24 12:07 [PATCH v2 0/6] mtd: spi-nor: move manuf out of the core - batch 2 Tudor.Ambarus
2019-08-24 12:07 ` [PATCH v2 1/6] mtd: spi-nor: Add post_sfdp() hook to tweak flash config Tudor.Ambarus
2019-08-24 12:07 ` [PATCH v2 2/6] mtd: spi-nor: Add spansion_post_sfdp_fixups() Tudor.Ambarus
2019-08-24 12:07 ` Tudor.Ambarus [this message]
2019-08-24 12:07 ` [PATCH v2 4/6] mtd: spi_nor: Add a ->setup() method Tudor.Ambarus
2019-08-25 12:34   ` Boris Brezillon
2019-08-24 12:07 ` [PATCH v2 5/6] mtd: spi-nor: Add s3an_post_sfdp_fixups() Tudor.Ambarus
2019-08-25 12:36   ` Boris Brezillon
2019-08-24 12:07 ` [PATCH v2 6/6] mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag Tudor.Ambarus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190824120650.14752-4-tudor.ambarus@microchip.com \
    --to=tudor.ambarus@microchip.com \
    --cc=boris.brezillon@bootlin.com \
    --cc=boris.brezillon@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).