From: <Tudor.Ambarus@microchip.com>
To: <boris.brezillon@collabora.com>, <marek.vasut@gmail.com>,
<vigneshr@ti.com>, <miquel.raynal@bootlin.com>, <richard@nod.at>,
<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>
Cc: <boris.brezillon@bootlin.com>, <Tudor.Ambarus@microchip.com>
Subject: [RESEND PATCH v3 16/20] mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag
Date: Mon, 26 Aug 2019 12:09:02 +0000 [thread overview]
Message-ID: <20190826120821.16351-17-tudor.ambarus@microchip.com> (raw)
In-Reply-To: <20190826120821.16351-1-tudor.ambarus@microchip.com>
From: Boris Brezillon <boris.brezillon@bootlin.com>
S3AN flashes use a specific opcode to read the status register.
We currently use the SPI_S3AN flag to decide whether this specific
SR read opcode should be used, but SPI_S3AN is about to disappear, so
let's add a new flag.
Note that we use the same bit as SPI_S3AN implies SPI_NOR_XSR_RDY and
vice versa.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v3: no changes
drivers/mtd/spi-nor/spi-nor.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index edf1c8badac9..2699e999d21a 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -211,6 +211,14 @@ struct flash_info {
* bit. Must be used with
* SPI_NOR_HAS_LOCK.
*/
+#define SPI_NOR_XSR_RDY BIT(10) /*
+ * S3AN flashes have specific opcode to
+ * read the status register.
+ * Flags SPI_NOR_XSR_RDY and SPI_S3AN
+ * use the same bit as one implies the
+ * other, but we will get rid of
+ * SPI_S3AN soon.
+ */
#define SPI_S3AN BIT(10) /*
* Xilinx Spartan 3AN In-System Flash
* (MFR cannot be used for probing
@@ -4798,7 +4806,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
* spi_nor_wait_till_ready(). Xilinx S3AN share MFR
* with Atmel spi-nor
*/
- if (info->flags & SPI_S3AN)
+ if (info->flags & SPI_NOR_XSR_RDY)
nor->flags |= SNOR_F_READY_XSR_RDY;
if (info->flags & SPI_NOR_HAS_LOCK)
--
2.9.5
next prev parent reply other threads:[~2019-08-26 12:09 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-26 12:08 [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 01/20] mtd: spi-nor: Regroup flash parameter and settings Tudor.Ambarus
2019-08-27 4:21 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 02/20] mtd: spi-nor: Use nor->params Tudor.Ambarus
2019-08-27 4:31 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 03/20] mtd: spi-nor: Drop quad_enable() from 'struct spi-nor' Tudor.Ambarus
2019-08-27 4:47 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 04/20] mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter' Tudor.Ambarus
2019-08-26 12:38 ` Boris Brezillon
2019-08-27 5:39 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 05/20] mtd: spi-nor: Add default_init() hook to tweak flash parameters Tudor.Ambarus
2019-08-27 5:48 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 06/20] mtd: spi-nor: Add a default_init() fixup hook for gd25q256 Tudor.Ambarus
2019-08-27 5:48 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 07/20] mtd: spi_nor: Move manufacturer quad_enable() in ->default_init() Tudor.Ambarus
2019-08-27 5:54 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 08/20] mtd: spi-nor: Split spi_nor_init_params() Tudor.Ambarus
2019-08-27 6:00 ` Vignesh Raghavendra
2019-08-27 7:01 ` Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 09/20] mtd: spi-nor: Create a ->set_4byte() method Tudor.Ambarus
2019-08-27 6:07 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 10/20] mtd: spi-nor: Rework the SPI NOR lock/unlock logic Tudor.Ambarus
2019-08-27 6:36 ` Vignesh Raghavendra
2019-08-27 6:58 ` Tudor.Ambarus
2019-08-26 12:08 ` [RESEND PATCH v3 11/20] mtd: spi-nor: Add post_sfdp() hook to tweak flash config Tudor.Ambarus
2019-08-27 7:08 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 12/20] mtd: spi-nor: Add spansion_post_sfdp_fixups() Tudor.Ambarus
2019-08-27 7:10 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 13/20] mtd: spi-nor: Add a ->convert_addr() method Tudor.Ambarus
2019-08-27 7:13 ` Vignesh Raghavendra
2019-08-26 12:08 ` [RESEND PATCH v3 14/20] mtd: spi_nor: Add a ->setup() method Tudor.Ambarus
2019-08-26 12:40 ` Boris Brezillon
2019-08-26 13:38 ` Schrempf Frieder
2019-08-26 14:02 ` Boris Brezillon
2019-08-26 14:37 ` Schrempf Frieder
2019-08-27 7:16 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 15/20] mtd: spi-nor: Add s3an_post_sfdp_fixups() Tudor.Ambarus
2019-08-27 7:18 ` Vignesh Raghavendra
2019-08-26 12:09 ` Tudor.Ambarus [this message]
2019-08-27 7:48 ` [RESEND PATCH v3 16/20] mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 17/20] mtd: spi-nor: Bring flash params init together Tudor.Ambarus
2019-08-27 7:35 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 18/20] mtd: spi_nor: Introduce spi_nor_set_addr_width() Tudor.Ambarus
2019-08-27 7:37 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND PATCH v3 19/20] mtd: spi-nor: Introduce spi_nor_get_flash_info() Tudor.Ambarus
2019-08-27 7:37 ` Vignesh Raghavendra
2019-08-26 12:09 ` [RESEND RFC PATCH v3 20/20] mtd: spi-nor: Rework the disabling of block write protection Tudor.Ambarus
2019-08-26 12:49 ` Boris Brezillon
2019-08-27 5:33 ` [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core Vignesh Raghavendra
2019-08-28 10:18 ` Tudor.Ambarus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190826120821.16351-17-tudor.ambarus@microchip.com \
--to=tudor.ambarus@microchip.com \
--cc=boris.brezillon@bootlin.com \
--cc=boris.brezillon@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).