From: Peter Rosin <peda@axentia.se>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: Peter Rosin <peda@axentia.se>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Jonathan Corbet <corbet@lwn.net>,
"dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>,
"linux-fbdev@vger.kernel.org" <linux-fbdev@vger.kernel.org>,
"linux-doc@vger.kernel.org" <linux-doc@vger.kernel.org>,
Matthew Wilcox <willy@infradead.org>,
Geert Uytterhoeven <geert@linux-m68k.org>
Subject: [PATCH v3 1/3] fbdev: fix numbering of fbcon options
Date: Tue, 27 Aug 2019 11:09:16 +0000 [thread overview]
Message-ID: <20190827110854.12574-2-peda@axentia.se> (raw)
In-Reply-To: <20190827110854.12574-1-peda@axentia.se>
Three shall be the number thou shalt count, and the number of the
counting shall be three. Four shalt thou not count...
One! Two! Five!
Fixes: efb985f6b265 ("[PATCH] fbcon: Console Rotation - Add framebuffer console documentation")
Signed-off-by: Peter Rosin <peda@axentia.se>
---
Documentation/fb/fbcon.rst | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/fb/fbcon.rst b/Documentation/fb/fbcon.rst
index ebca41785abe..65ba40255137 100644
--- a/Documentation/fb/fbcon.rst
+++ b/Documentation/fb/fbcon.rst
@@ -127,7 +127,7 @@ C. Boot options
is typically located on the same video card. Thus, the consoles that
are controlled by the VGA console will be garbled.
-4. fbcon=rotate:<n>
+5. fbcon=rotate:<n>
This option changes the orientation angle of the console display. The
value 'n' accepts the following:
@@ -152,21 +152,21 @@ C. Boot options
Actually, the underlying fb driver is totally ignorant of console
rotation.
-5. fbcon=margin:<color>
+6. fbcon=margin:<color>
This option specifies the color of the margins. The margins are the
leftover area at the right and the bottom of the screen that are not
used by text. By default, this area will be black. The 'color' value
is an integer number that depends on the framebuffer driver being used.
-6. fbcon=nodefer
+7. fbcon=nodefer
If the kernel is compiled with deferred fbcon takeover support, normally
the framebuffer contents, left in place by the firmware/bootloader, will
be preserved until there actually is some text is output to the console.
This option causes fbcon to bind immediately to the fbdev device.
-7. fbcon=logo-pos:<location>
+8. fbcon=logo-pos:<location>
The only possible 'location' is 'center' (without quotes), and when
given, the bootup logo is moved from the default top-left corner
--
2.11.0
next prev parent reply other threads:[~2019-08-27 11:09 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-27 11:09 [PATCH v3 0/3] Add possibility to specify the number of displayed logos Peter Rosin
2019-08-27 11:09 ` Peter Rosin [this message]
2019-08-27 11:25 ` [PATCH v3 1/3] fbdev: fix numbering of fbcon options Geert Uytterhoeven
2020-01-03 11:51 ` Bartlomiej Zolnierkiewicz
2019-08-27 11:09 ` [PATCH v3 2/3] fbdev: fbmem: allow overriding the number of bootup logos Peter Rosin
2019-08-27 11:25 ` Geert Uytterhoeven
2020-01-03 11:52 ` Bartlomiej Zolnierkiewicz
2019-08-27 11:09 ` [PATCH v3 3/3] fbdev: fbmem: avoid exporting fb_center_logo Peter Rosin
2019-08-27 11:35 ` Geert Uytterhoeven
2019-08-29 7:08 ` Peter Rosin
2020-01-03 11:55 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190827110854.12574-2-peda@axentia.se \
--to=peda@axentia.se \
--cc=b.zolnierkie@samsung.com \
--cc=corbet@lwn.net \
--cc=dri-devel@lists.freedesktop.org \
--cc=geert@linux-m68k.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).