LKML Archive on
 help / color / Atom feed
From: Bartosz Golaszewski <>
To: Liam Girdwood <>, Mark Brown <>
	Bartosz Golaszewski <>
Subject: [PATCH] regulator: add missing 'static inline' to a helper's stub
Date: Mon,  2 Sep 2019 17:13:32 +0200
Message-ID: <> (raw)

From: Bartosz Golaszewski <>

The build fails when CONFIG_REGULATOR is not selected because the stub
for regulator_bulk_set_supply_names() is missing the 'static inline'

Signed-off-by: Bartosz Golaszewski <>
 include/linux/regulator/consumer.h | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 6d2181a76987..337a46391527 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -586,9 +586,10 @@ static inline int regulator_list_voltage(struct regulator *regulator, unsigned s
 	return -EINVAL;
-void regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
-				     const char *const *supply_names,
-				     unsigned int num_supplies)
+static inline void
+regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
+				const char *const *supply_names,
+				unsigned int num_supplies)

             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-02 15:13 Bartosz Golaszewski [this message]
2019-09-03 11:57 ` Applied "regulator: add missing 'static inline' to a helper's stub" to the regulator tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git
	git clone --mirror lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone