linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jaegeuk Kim <jaegeuk@kernel.org>
To: Chao Yu <yuchao0@huawei.com>
Cc: linux-kernel@vger.kernel.org, linux-f2fs-devel@lists.sourceforge.net
Subject: Re: [f2fs-dev] [PATCH] f2fs: convert inline_data in prior to i_size_write
Date: Mon, 2 Sep 2019 16:07:00 -0700	[thread overview]
Message-ID: <20190902230700.GE71929@jaegeuk-macbookpro.roam.corp.google.com> (raw)
In-Reply-To: <aff72932-5be3-0d81-b68d-017a392a334b@huawei.com>

On 09/02, Chao Yu wrote:
> On 2019/9/1 15:25, Jaegeuk Kim wrote:
> > On 08/31, Chao Yu wrote:
> >> On 2019/8/30 23:34, Jaegeuk Kim wrote:
> >>> This can guarantee inline_data has smaller i_size.
> >>
> >> So I guess "f2fs: fix to avoid corruption during inline conversion" didn't fix
> >> such corruption right, I guess checkpoint & SPO before i_size recovery will
> >> cause this issue?
> >>
> >> 	err = f2fs_convert_inline_inode(inode);
> >> 	if (err) {
> >>
> >> -->
> > 
> > Yup, I think so.
> 
> Oh,  we'd better to avoid wrong fixing patch as much as possible, so what about
> letting me change that patch to just fix error path of
> f2fs_convert_inline_page() by adding missing f2fs_truncate_data_blocks_range()?

Could you post another patch? I'm okay to combine them.

> 
> Meanwhile I need to add below 'Fixes' tag line:
> 7735730d39d7 ("f2fs: fix to propagate error from __get_meta_page()")
> 
> 
> And if possible, could you add:
> 
> In below call path, if we failed to convert inline inode, inline inode may have
> wrong i_size which is larger than max inline size.
> - f2fs_setattr
>  - truncate_setsize
>  - f2fs_convert_inline_inode
> 
> Fixes: 0cab80ee0c9e ("f2fs: fix to convert inline inode in ->setattr")
> 
> > 
> >>
> >> 		/* recover old i_size */
> >> 		i_size_write(inode, old_size);
> >> 		return err;
> >>
> >>>
> >>> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
> >>
> >> Reviewed-by: Chao Yu <yuchao0@huawei.com>
> >>
> >>> ---
> >>>  fs/f2fs/file.c | 25 +++++++++----------------
> >>>  1 file changed, 9 insertions(+), 16 deletions(-)
> >>>
> >>> diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
> >>> index 08caaead6f16..a43193dd27cb 100644
> >>> --- a/fs/f2fs/file.c
> >>> +++ b/fs/f2fs/file.c
> >>> @@ -815,14 +815,20 @@ int f2fs_setattr(struct dentry *dentry, struct iattr *attr)
> >>>  
> >>>  	if (attr->ia_valid & ATTR_SIZE) {
> >>>  		loff_t old_size = i_size_read(inode);
> >>> -		bool to_smaller = (attr->ia_size <= old_size);
> >>> +
> >>> +		if (attr->ia_size > MAX_INLINE_DATA(inode)) {
> >>> +			/* should convert inline inode here */
> >>
> >> Would it be better:
> >>
> >> /* should convert inline inode here in piror to i_size_write to avoid
> >> inconsistent status in between inline flag and i_size */
> > 
> > Put like this.
> > 
> > +                       /*
> > +                        * should convert inline inode before i_size_write to
> > +                        * keep smaller than inline_data size with inline flag.
> > +                        */
> 
> Better, :)
> 
> thanks,
> 
> > 
> >>
> >> Thanks,
> >>
> >>> +			err = f2fs_convert_inline_inode(inode);
> >>> +			if (err)
> >>> +				return err;
> >>> +		}
> >>>  
> >>>  		down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
> >>>  		down_write(&F2FS_I(inode)->i_mmap_sem);
> >>>  
> >>>  		truncate_setsize(inode, attr->ia_size);
> >>>  
> >>> -		if (to_smaller)
> >>> +		if (attr->ia_size <= old_size)
> >>>  			err = f2fs_truncate(inode);
> >>>  		/*
> >>>  		 * do not trim all blocks after i_size if target size is
> >>> @@ -830,24 +836,11 @@ int f2fs_setattr(struct dentry *dentry, struct iattr *attr)
> >>>  		 */
> >>>  		up_write(&F2FS_I(inode)->i_mmap_sem);
> >>>  		up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
> >>> -
> >>>  		if (err)
> >>>  			return err;
> >>>  
> >>> -		if (!to_smaller) {
> >>> -			/* should convert inline inode here */
> >>> -			if (!f2fs_may_inline_data(inode)) {
> >>> -				err = f2fs_convert_inline_inode(inode);
> >>> -				if (err) {
> >>> -					/* recover old i_size */
> >>> -					i_size_write(inode, old_size);
> >>> -					return err;
> >>> -				}
> >>> -			}
> >>> -			inode->i_mtime = inode->i_ctime = current_time(inode);
> >>> -		}
> >>> -
> >>>  		down_write(&F2FS_I(inode)->i_sem);
> >>> +		inode->i_mtime = inode->i_ctime = current_time(inode);
> >>>  		F2FS_I(inode)->last_disk_size = i_size_read(inode);
> >>>  		up_write(&F2FS_I(inode)->i_sem);
> >>>  	}
> >>>
> > .
> > 

  reply	other threads:[~2019-09-02 23:07 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-30 15:34 [PATCH] f2fs: convert inline_data in prior to i_size_write Jaegeuk Kim
2019-08-31  2:16 ` [f2fs-dev] " Chao Yu
2019-09-01  7:25   ` Jaegeuk Kim
2019-09-02  1:45     ` Chao Yu
2019-09-02 23:07       ` Jaegeuk Kim [this message]
2019-09-02 23:35         ` Chao Yu
2019-09-03  2:09           ` Chao Yu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190902230700.GE71929@jaegeuk-macbookpro.roam.corp.google.com \
    --to=jaegeuk@kernel.org \
    --cc=linux-f2fs-devel@lists.sourceforge.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=yuchao0@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).