[PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Mike Rapoport]

From: Mike Rapoport <rppt@linux.ibm.com>

The memory initialization of SGI-IP27 is already half-way to support
SPARSEMEM and only a call to sparse_init() was missing. Add it to
prom_meminit() and adjust arch/mips/Kconfig to enable SPARSEMEM and
SPARSEMEM_EXTREME for SGI-IP27

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
---

Thomas, could you please test this on your Origin machine?


 arch/mips/Kconfig                | 12 ++----------
 arch/mips/sgi-ip27/ip27-memory.c |  2 ++
 2 files changed, 4 insertions(+), 10 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d50fafd..e4b02b5 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -669,6 +669,7 @@ config SGI_IP22
 config SGI_IP27
 	bool "SGI IP27 (Origin200/2000)"
 	select ARCH_HAS_PHYS_TO_DMA
+	select ARCH_SPARSEMEM_ENABLE
 	select FW_ARC
 	select FW_ARC64
 	select BOOT_ELF64
@@ -2633,18 +2634,9 @@ config ARCH_FLATMEM_ENABLE
 	def_bool y
 	depends on !NUMA && !CPU_LOONGSON2
 
-config ARCH_DISCONTIGMEM_ENABLE
-	bool
-	default y if SGI_IP27
-	help
-	  Say Y to support efficient handling of discontiguous physical memory,
-	  for architectures which are either NUMA (Non-Uniform Memory Access)
-	  or have huge holes in the physical address space for other reasons.
-	  See <file:Documentation/vm/numa.rst> for more.
-
 config ARCH_SPARSEMEM_ENABLE
 	bool
-	select SPARSEMEM_STATIC
+	select SPARSEMEM_STATIC if !SGI_IP27
 
 config NUMA
 	bool "NUMA Support"
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index fb077a9..a8ddebc 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -444,6 +444,8 @@ void __init prom_meminit(void)
 		}
 		__node_data[node] = &null_node;
 	}
+
+	sparse_init();
 }
 
 void __init prom_free_prom_memory(void)
-- 
2.7.4

Re: [PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Thomas Bogendoerfer]

On Thu,  5 Sep 2019 08:47:57 +0300
Mike Rapoport <rppt@kernel.org> wrote:

> From: Mike Rapoport <rppt@linux.ibm.com>
> 
> The memory initialization of SGI-IP27 is already half-way to support
> SPARSEMEM and only a call to sparse_init() was missing. Add it to
> prom_meminit() and adjust arch/mips/Kconfig to enable SPARSEMEM and
> SPARSEMEM_EXTREME for SGI-IP27
> 
> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
> ---
> 
> Thomas, could you please test this on your Origin machine?

it crashes in sparse_early_usemaps_alloc_pgdat_section(). Since there is
already a sparse_init() in arch_mem_setup() I removed it from ip27-memory.c.
With this booting made more progress but I get an unaligned access in
kernel_init_free_pages(). 

My time is a little bit limited today to dig deeper, but testing patches
is easy.

Thomas.

-- 
SUSE Software Solutions Germany GmbH
HRB 247165 (AG München)
Geschäftsführer: Felix Imendörffer

Re: [PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Mike Rapoport]

On Thu, Sep 05, 2019 at 03:21:50PM +0200, Thomas Bogendoerfer wrote:
> On Thu,  5 Sep 2019 08:47:57 +0300
> Mike Rapoport <rppt@kernel.org> wrote:
> 
> > From: Mike Rapoport <rppt@linux.ibm.com>
> > 
> > The memory initialization of SGI-IP27 is already half-way to support
> > SPARSEMEM and only a call to sparse_init() was missing. Add it to
> > prom_meminit() and adjust arch/mips/Kconfig to enable SPARSEMEM and
> > SPARSEMEM_EXTREME for SGI-IP27
> > 
> > Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
> > ---
> > 
> > Thomas, could you please test this on your Origin machine?
> 
> it crashes in sparse_early_usemaps_alloc_pgdat_section(). Since there is
> already a sparse_init() in arch_mem_setup() I removed it from ip27-memory.c.

Oops, missed that.

> With this booting made more progress but I get an unaligned access in
> kernel_init_free_pages(). 

Can you please share the log?
 
> My time is a little bit limited today to dig deeper, but testing patches
> is easy.
> 
> Thomas.
> 
> -- 
> SUSE Software Solutions Germany GmbH
> HRB 247165 (AG München)
> Geschäftsführer: Felix Imendörffer

-- 
Sincerely yours,
Mike.

Re: [PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Thomas Bogendoerfer]

On Thu, 5 Sep 2019 16:32:53 +0300
Mike Rapoport <rppt@kernel.org> wrote:

> On Thu, Sep 05, 2019 at 03:21:50PM +0200, Thomas Bogendoerfer wrote:
> > On Thu,  5 Sep 2019 08:47:57 +0300
> > Mike Rapoport <rppt@kernel.org> wrote:
> > 
> > > From: Mike Rapoport <rppt@linux.ibm.com>
> > > 
> > > The memory initialization of SGI-IP27 is already half-way to support
> > > SPARSEMEM and only a call to sparse_init() was missing. Add it to
> > > prom_meminit() and adjust arch/mips/Kconfig to enable SPARSEMEM and
> > > SPARSEMEM_EXTREME for SGI-IP27
> > > 
> > > Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
> > > ---
> > > 
> > > Thomas, could you please test this on your Origin machine?
> > 
> > it crashes in sparse_early_usemaps_alloc_pgdat_section(). Since there is
> > already a sparse_init() in arch_mem_setup() I removed it from ip27-memory.c.
> 
> Oops, missed that.
> 
> > With this booting made more progress but I get an unaligned access in
> > kernel_init_free_pages(). 
> 
> Can you please share the log?

sure

Linux version 5.3.0-rc5-01209-gad9238e45ea0-dirty (tbogendoerfer@samweis) (gcc version 6.1.1 20160621 (Red Hat Cross 6.1.1-2) (GCC)) #759 SMP Thu Sep 5 15:04:55 CEST 2019
ARCH: SGI-IP27
PROMLIB: ARC firmware Version 64 Revision 0
Discovered 8 cpus on 4 nodes
************** Topology ********************
    00 01 02 03 
00   0  1  2  2 
01   1  0  2  2 
02   2  2  0  1 
03   2  2  1  0 
Router 0: r 1 0 r
Router 1: r 3 2 r
printk: bootconsole [early0] enabled
CPU0 revision is: 00000e23 (R12000)
FPU revision is: 00000900
Checking for the multiply/shift bug... no.
Checking for the daddiu bug... no.
IP27: Running on node 0.
Node 0 has a primary CPU, CPU is running.
Node 0 has a secondary CPU, CPU is running.
Machine is in M mode.
Determined physical RAM map:
 memory: 00000000006ec000 @ 000000000001c000 (usable)
 memory: 0000000000058000 @ 0000000000708000 (usable after init)
 memory: 000000000002f000 @ 0000000000760000 (usable)
sparse init
REPLICATION: ON nasid 0, ktext from nasid 0, kdata from nasid 0
REPLICATION: ON nasid 1, ktext from nasid 0, kdata from nasid 0
REPLICATION: ON nasid 2, ktext from nasid 0, kdata from nasid 0
REPLICATION: ON nasid 3, ktext from nasid 0, kdata from nasid 0
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 8192kB 2-way, linesize 128 bytes.
Zone ranges:
  Normal   [mem 0x0000000000000000-0x000000035bffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000000000-0x0000000023ffffff]
  node   0: [mem 0x0000000028000000-0x000000002bffffff]
  node   0: [mem 0x0000000030000000-0x0000000033ffffff]
  node   0: [mem 0x0000000038000000-0x000000003bffffff]
  node   1: [mem 0x0000000100000000-0x0000000123ffffff]
  node   1: [mem 0x0000000128000000-0x000000012bffffff]
  node   1: [mem 0x0000000130000000-0x0000000133ffffff]
  node   1: [mem 0x0000000138000000-0x000000013bffffff]
  node   2: [mem 0x0000000200000000-0x0000000203ffffff]
  node   2: [mem 0x0000000208000000-0x000000020bffffff]
  node   2: [mem 0x0000000210000000-0x0000000213ffffff]
  node   2: [mem 0x0000000218000000-0x000000021bffffff]
  node   2: [mem 0x0000000220000000-0x0000000223ffffff]
  node   2: [mem 0x0000000228000000-0x000000022bffffff]
  node   2: [mem 0x0000000230000000-0x0000000233ffffff]
  node   2: [mem 0x0000000238000000-0x000000023bffffff]
  node   3: [mem 0x0000000300000000-0x0000000303ffffff]
  node   3: [mem 0x0000000308000000-0x000000030bffffff]
  node   3: [mem 0x0000000310000000-0x0000000313ffffff]
  node   3: [mem 0x0000000318000000-0x000000031bffffff]
  node   3: [mem 0x0000000320000000-0x0000000323ffffff]
  node   3: [mem 0x0000000328000000-0x000000032bffffff]
  node   3: [mem 0x0000000330000000-0x0000000333ffffff]
  node   3: [mem 0x0000000338000000-0x000000033bffffff]
  node   3: [mem 0x0000000340000000-0x0000000343ffffff]
  node   3: [mem 0x0000000348000000-0x000000034bffffff]
  node   3: [mem 0x0000000350000000-0x0000000353ffffff]
  node   3: [mem 0x0000000358000000-0x000000035bffffff]
Zeroed struct page in unavailable ranges: 442368 pages
Initmem setup node 0 [mem 0x0000000000000000-0x000000003bffffff]
Initmem setup node 1 [mem 0x0000000100000000-0x000000013bffffff]
Initmem setup node 2 [mem 0x0000000200000000-0x000000023bffffff]
Initmem setup node 3 [mem 0x0000000300000000-0x000000035bffffff]
percpu: Embedded 19 pages/cpu s39584 r8192 d30048 u77824
CPU 0 clock is 300MHz.
Built 4 zonelists, mobility grouping on.  Total pages: 711040
Policy zone: Normal
Kernel command line: root=dksc(0,1,0) ip=dhcp root=/dev/nfs
printk: log_buf_len individual max cpu contribution: 4096 bytes
printk: log_buf_len total cpu_extra contributions: 28672 bytes
printk: log_buf_len min size: 32768 bytes
printk: log_buf_len: 65536 bytes
printk: early log buf free: 26584(81%)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 2803980K/2883584K available (5527K kernel code, 347K rwdata, 1196K rodata, 352K init, 186K bss, 79604K reserved, 0K cma-reserved)
rcu: Hierarchical RCU implementation.
rcu: 	RCU event tracing is enabled.
rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 256
clocksource: HUB-RT: mask: 0xfffffffffffff max_cycles: 0x127350b88, max_idle_ns: 1763180808480 ns
sched_clock: 52 bits at 1250kHz, resolution 800ns, wraps every 4398046510800ns
Calibrating delay loop... 449.02 BogoMIPS (lpj=898048)
pid_max: default: 32768 minimum: 301
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, vmalloc)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, vmalloc)
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
Checking for the daddi bug... no.
rcu: Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 8192kB 2-way, linesize 128 bytes.
CPU 1 clock is 300MHz.
CPU1 revision is: 00000e23 (R12000)
FPU revision is: 00000900
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 8192kB 2-way, linesize 128 bytes.
CPU 2 clock is 300MHz.
CPU2 revision is: 00000e23 (R12000)
FPU revision is: 00000900
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 8192kB 2-way, linesize 128 bytes.
CPU 3 clock is 300MHz.
CPU3 revision is: 00000e23 (R12000)
FPU revision is: 00000900
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 8192kB 2-way, linesize 128 bytes.
CPU 4 clock is 300MHz.
CPU4 revision is: 00000e23 (R12000)
FPU revision is: 00000900
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 8192kB 2-way, linesize 128 bytes.
CPU 5 clock is 300MHz.
CPU5 revision is: 00000e23 (R12000)
FPU revision is: 00000900
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 8192kB 2-way, linesize 128 bytes.
CPU 6 clock is 300MHz.
CPU6 revision is: 00000e23 (R12000)
FPU revision is: 00000900
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 8192kB 2-way, linesize 128 bytes.
CPU 7 clock is 300MHz.
CPU7 revision is: 00000e23 (R12000)
FPU revision is: 00000900
smp: Brought up 4 nodes, 8 CPUs
random: get_random_u32 called from bucket_table_alloc.isra.11+0x70/0x260 with crng_init=0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 6, 262144 bytes, vmalloc)
NET: Registered protocol family 16
xtalk:n0/0 xbow widget
xtalk:n0/8 bridge widget
xtalk:n0/c bridge widget
xtalk:n1/0 xbow widget
xtalk:n2/0 xbow widget
xtalk:n3/0 xbow widget
xtalk:n3/b bridge widget
xtalk:n3/e bridge widget
SCSI subsystem initialized
clocksource: Switched to clocksource HUB-RT
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, vmalloc)
TCP established hash table entries: 32768 (order: 6, 262144 bytes, vmalloc)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes, vmalloc)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes, vmalloc)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, vmalloc)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 128
workingset: timestamp_bits=56 max_order=20 bucket_order=0
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler mq-deadline registered
Unhandled kernel unaligned access[#1]:
CPU: 1 PID: 52 Comm: kworker/u17:1 Not tainted 5.3.0-rc5-01209-gad9238e45ea0-dirty #759
Workqueue: events_unbound call_usermodehelper_exec_work
$ 0   : 0000000000000000 ffffffff94001ce0 0000000000000000 0000000000000000
$ 4   : a80000003bb4c000 00000000005882b0 15b6db6e4b198e00 0000000000000201
$ 8   : a8000000006d8000 a8000000006d8000 ffffffffffffffff ffffffffffffff7f
$12   : ffffffff94001ce1 000000001000001e 0000000000000002 0000000000000000
$16   : a80000003bb4f800 fffffffffc800000 15b6db6e4b198000 0000000000000000
$20   : a80000000003fcb8 a80000000014c554 a80000000206d940 0000000000000000
$24   : 0000000000000000 0000000000770000                                  
$28   : a80000003bb4c000 a80000003bb4f7a0 a80000000206d940 a800000000026700
Hi    : fb49249249405dec
Lo    : 90b6db6db6e4b198
epc   : a80000000002e824 do_ade+0x314/0x7d0
ra    : a800000000026700 handle_ades_int+0x2c/0x4c
Status: 94001ce3	KX SX UX KERNEL EXL IE 
Cause : 00008014 (ExcCode 05)
BadVA : 15b6db6e4b198000
PrId  : 00000e23 (R12000)
Modules linked in:
Process kworker/u17:1 (pid: 52, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
Stack : 0000000000000000 0000000000000000 0000000000000000 0000000000000000
        6db6db6db6db6db7 a80000000206da20 a800000000000000 a800000000780000
        fffffffffffffff0 a80000000206d940 a80000000206d940 a800000000026700
        0000000000000000 ffffffff94001ce0 0000000000000030 a80000003bb51c90
        15b6db6e4b198000 0000000000000004 15b6db6e4b198e00 0000000000000201
        a8000000006d8000 a8000000006d8000 ffffffffffffffff ffffffffffffff7f
        a80000000206da28 a80000000078f110 0000000000000002 0000000000000000
        6db6db6db6db6db7 a80000000206da20 a800000000000000 a800000000780000
        fffffffffffffff0 a80000000206d940 a80000000206d940 0000000000000000
        0000000000000000 0000000000770000 0000000000000001 a8000000006d8000
        ...
Call Trace:
[<a80000000002e824>] do_ade+0x314/0x7d0
[<a800000000026700>] handle_ades_int+0x2c/0x4c
[<a80000000014c554>] kernel_init_free_pages+0xcc/0x138
[<a80000000014c77c>] prep_new_page+0x154/0x160
[<a800000000150e08>] get_page_from_freelist+0xab8/0x11c8
[<a800000000151c80>] __alloc_pages_nodemask+0x140/0xe68
[<a80000000004a338>] copy_process+0x210/0x1728
[<a80000000004ba60>] _do_fork+0x90/0x2e8
[<a80000000004bd28>] kernel_thread+0x50/0x60
[<a800000000066540>] call_usermodehelper_exec_work+0x40/0x100
[<a80000000006bb0c>] process_one_work+0x25c/0x4c0
[<a80000000006bf30>] worker_thread+0x1c0/0x690
[<a800000000072da8>] kthread+0x148/0x178
[<a800000000025b08>] ret_from_kernel_thread+0x14/0x1c
Code: 000210f8  0202102d  dc420000 <b2420000> b6420007  24120000  5640ffd1  02002025  1000ff88 

Unhandled kernel unaligned access[#2]:
---[ end trace 8dd03d5368f266cc ]---

-- 
SUSE Software Solutions Germany GmbH
HRB 247165 (AG München)
Geschäftsführer: Felix Imendörffer

Re: [PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Mike Rapoport]

On Thu, Sep 05, 2019 at 03:48:31PM +0200, Thomas Bogendoerfer wrote:
> On Thu, 5 Sep 2019 16:32:53 +0300
> Mike Rapoport <rppt@kernel.org> wrote:
> 
> > On Thu, Sep 05, 2019 at 03:21:50PM +0200, Thomas Bogendoerfer wrote:
> > > On Thu,  5 Sep 2019 08:47:57 +0300
> > > Mike Rapoport <rppt@kernel.org> wrote:
> > > 
> > > > From: Mike Rapoport <rppt@linux.ibm.com>
> > > > 
> > > > The memory initialization of SGI-IP27 is already half-way to support
> > > > SPARSEMEM and only a call to sparse_init() was missing. Add it to
> > > > prom_meminit() and adjust arch/mips/Kconfig to enable SPARSEMEM and
> > > > SPARSEMEM_EXTREME for SGI-IP27
> > > > 
> > > > Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
> > > > ---
> > > > 
> > > > Thomas, could you please test this on your Origin machine?
> > > 
> > > it crashes in sparse_early_usemaps_alloc_pgdat_section(). Since there is
> > > already a sparse_init() in arch_mem_setup() I removed it from ip27-memory.c.
> > 
> > Oops, missed that.
> > 
> > > With this booting made more progress but I get an unaligned access in
> > > kernel_init_free_pages(). 
> > 
> > Can you please share the log?
> 
> sure

Nothing looked particularly suspicious, but I've found that I've missed the
definition of pfn_to_nid() is for DISCONTIGMEM only, maybe making it
available for SPARSE would help :)

I'm pretty much shooting in the dark here, but can you please try the patch
below on top of the original one:

diff --git a/arch/mips/include/asm/mmzone.h b/arch/mips/include/asm/mmzone.h
index b826b84..273290e 100644
--- a/arch/mips/include/asm/mmzone.h
+++ b/arch/mips/include/asm/mmzone.h
@@ -20,10 +20,10 @@
 #define nid_to_addrbase(nid) 0
 #endif
 
-#ifdef CONFIG_DISCONTIGMEM
+/* #ifdef CONFIG_DISCONTIGMEM */
 
 #define pfn_to_nid(pfn)		pa_to_nid((pfn) << PAGE_SHIFT)
 
-#endif /* CONFIG_DISCONTIGMEM */
+/* #endif /\* CONFIG_DISCONTIGMEM *\/ */
 
 #endif /* _ASM_MMZONE_H_ */
 
> Linux version 5.3.0-rc5-01209-gad9238e45ea0-dirty (tbogendoerfer@samweis) (gcc version 6.1.1 20160621 (Red Hat Cross 6.1.1-2) (GCC)) #759 SMP Thu Sep 5 15:04:55 CEST 2019
> ARCH: SGI-IP27
> PROMLIB: ARC firmware Version 64 Revision 0
> Discovered 8 cpus on 4 nodes
> ************** Topology ********************
>     00 01 02 03 
> 00   0  1  2  2 
> 01   1  0  2  2 
> 02   2  2  0  1 
> 03   2  2  1  0 
> Router 0: r 1 0 r
> Router 1: r 3 2 r
> printk: bootconsole [early0] enabled
> CPU0 revision is: 00000e23 (R12000)
> FPU revision is: 00000900
> Checking for the multiply/shift bug... no.
> Checking for the daddiu bug... no.
> IP27: Running on node 0.
> Node 0 has a primary CPU, CPU is running.
> Node 0 has a secondary CPU, CPU is running.
> Machine is in M mode.
> Determined physical RAM map:
>  memory: 00000000006ec000 @ 000000000001c000 (usable)
>  memory: 0000000000058000 @ 0000000000708000 (usable after init)
>  memory: 000000000002f000 @ 0000000000760000 (usable)
> sparse init
> REPLICATION: ON nasid 0, ktext from nasid 0, kdata from nasid 0
> REPLICATION: ON nasid 1, ktext from nasid 0, kdata from nasid 0
> REPLICATION: ON nasid 2, ktext from nasid 0, kdata from nasid 0
> REPLICATION: ON nasid 3, ktext from nasid 0, kdata from nasid 0
> Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
> Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
> Unified secondary cache 8192kB 2-way, linesize 128 bytes.
> Zone ranges:
>   Normal   [mem 0x0000000000000000-0x000000035bffffff]
> Movable zone start for each node
> Early memory node ranges
>   node   0: [mem 0x0000000000000000-0x0000000023ffffff]
>   node   0: [mem 0x0000000028000000-0x000000002bffffff]
>   node   0: [mem 0x0000000030000000-0x0000000033ffffff]
>   node   0: [mem 0x0000000038000000-0x000000003bffffff]
>   node   1: [mem 0x0000000100000000-0x0000000123ffffff]
>   node   1: [mem 0x0000000128000000-0x000000012bffffff]
>   node   1: [mem 0x0000000130000000-0x0000000133ffffff]
>   node   1: [mem 0x0000000138000000-0x000000013bffffff]
>   node   2: [mem 0x0000000200000000-0x0000000203ffffff]
>   node   2: [mem 0x0000000208000000-0x000000020bffffff]
>   node   2: [mem 0x0000000210000000-0x0000000213ffffff]
>   node   2: [mem 0x0000000218000000-0x000000021bffffff]
>   node   2: [mem 0x0000000220000000-0x0000000223ffffff]
>   node   2: [mem 0x0000000228000000-0x000000022bffffff]
>   node   2: [mem 0x0000000230000000-0x0000000233ffffff]
>   node   2: [mem 0x0000000238000000-0x000000023bffffff]
>   node   3: [mem 0x0000000300000000-0x0000000303ffffff]
>   node   3: [mem 0x0000000308000000-0x000000030bffffff]
>   node   3: [mem 0x0000000310000000-0x0000000313ffffff]
>   node   3: [mem 0x0000000318000000-0x000000031bffffff]
>   node   3: [mem 0x0000000320000000-0x0000000323ffffff]
>   node   3: [mem 0x0000000328000000-0x000000032bffffff]
>   node   3: [mem 0x0000000330000000-0x0000000333ffffff]
>   node   3: [mem 0x0000000338000000-0x000000033bffffff]
>   node   3: [mem 0x0000000340000000-0x0000000343ffffff]
>   node   3: [mem 0x0000000348000000-0x000000034bffffff]
>   node   3: [mem 0x0000000350000000-0x0000000353ffffff]
>   node   3: [mem 0x0000000358000000-0x000000035bffffff]
> Zeroed struct page in unavailable ranges: 442368 pages
> Initmem setup node 0 [mem 0x0000000000000000-0x000000003bffffff]
> Initmem setup node 1 [mem 0x0000000100000000-0x000000013bffffff]
> Initmem setup node 2 [mem 0x0000000200000000-0x000000023bffffff]
> Initmem setup node 3 [mem 0x0000000300000000-0x000000035bffffff]
> percpu: Embedded 19 pages/cpu s39584 r8192 d30048 u77824
> CPU 0 clock is 300MHz.
> Built 4 zonelists, mobility grouping on.  Total pages: 711040
> Policy zone: Normal
> Kernel command line: root=dksc(0,1,0) ip=dhcp root=/dev/nfs
> printk: log_buf_len individual max cpu contribution: 4096 bytes
> printk: log_buf_len total cpu_extra contributions: 28672 bytes
> printk: log_buf_len min size: 32768 bytes
> printk: log_buf_len: 65536 bytes
> printk: early log buf free: 26584(81%)
> mem auto-init: stack:off, heap alloc:off, heap free:off
> Memory: 2803980K/2883584K available (5527K kernel code, 347K rwdata, 1196K rodata, 352K init, 186K bss, 79604K reserved, 0K cma-reserved)
> rcu: Hierarchical RCU implementation.
> rcu: 	RCU event tracing is enabled.
> rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
> rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
> rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
> NR_IRQS: 256
> clocksource: HUB-RT: mask: 0xfffffffffffff max_cycles: 0x127350b88, max_idle_ns: 1763180808480 ns
> sched_clock: 52 bits at 1250kHz, resolution 800ns, wraps every 4398046510800ns
> Calibrating delay loop... 449.02 BogoMIPS (lpj=898048)
> io scheduler mq-deadline registered
> Unhandled kernel unaligned access[#1]:
> CPU: 1 PID: 52 Comm: kworker/u17:1 Not tainted 5.3.0-rc5-01209-gad9238e45ea0-dirty #759
> Workqueue: events_unbound call_usermodehelper_exec_work
> $ 0   : 0000000000000000 ffffffff94001ce0 0000000000000000 0000000000000000
> $ 4   : a80000003bb4c000 00000000005882b0 15b6db6e4b198e00 0000000000000201
> $ 8   : a8000000006d8000 a8000000006d8000 ffffffffffffffff ffffffffffffff7f
> $12   : ffffffff94001ce1 000000001000001e 0000000000000002 0000000000000000
> $16   : a80000003bb4f800 fffffffffc800000 15b6db6e4b198000 0000000000000000
> $20   : a80000000003fcb8 a80000000014c554 a80000000206d940 0000000000000000
> $24   : 0000000000000000 0000000000770000                                  
> $28   : a80000003bb4c000 a80000003bb4f7a0 a80000000206d940 a800000000026700
> Hi    : fb49249249405dec
> Lo    : 90b6db6db6e4b198
> epc   : a80000000002e824 do_ade+0x314/0x7d0
> ra    : a800000000026700 handle_ades_int+0x2c/0x4c
> Status: 94001ce3	KX SX UX KERNEL EXL IE 
> Cause : 00008014 (ExcCode 05)
> BadVA : 15b6db6e4b198000
> PrId  : 00000e23 (R12000)
> Modules linked in:
> Process kworker/u17:1 (pid: 52, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
> Stack : 0000000000000000 0000000000000000 0000000000000000 0000000000000000
>         6db6db6db6db6db7 a80000000206da20 a800000000000000 a800000000780000
>         fffffffffffffff0 a80000000206d940 a80000000206d940 a800000000026700
>         0000000000000000 ffffffff94001ce0 0000000000000030 a80000003bb51c90
>         15b6db6e4b198000 0000000000000004 15b6db6e4b198e00 0000000000000201
>         a8000000006d8000 a8000000006d8000 ffffffffffffffff ffffffffffffff7f
>         a80000000206da28 a80000000078f110 0000000000000002 0000000000000000
>         6db6db6db6db6db7 a80000000206da20 a800000000000000 a800000000780000
>         fffffffffffffff0 a80000000206d940 a80000000206d940 0000000000000000
>         0000000000000000 0000000000770000 0000000000000001 a8000000006d8000
>         ...
> Call Trace:
> [<a80000000002e824>] do_ade+0x314/0x7d0
> [<a800000000026700>] handle_ades_int+0x2c/0x4c
> [<a80000000014c554>] kernel_init_free_pages+0xcc/0x138
> [<a80000000014c77c>] prep_new_page+0x154/0x160
> [<a800000000150e08>] get_page_from_freelist+0xab8/0x11c8
> [<a800000000151c80>] __alloc_pages_nodemask+0x140/0xe68
> [<a80000000004a338>] copy_process+0x210/0x1728
> [<a80000000004ba60>] _do_fork+0x90/0x2e8
> [<a80000000004bd28>] kernel_thread+0x50/0x60
> [<a800000000066540>] call_usermodehelper_exec_work+0x40/0x100
> [<a80000000006bb0c>] process_one_work+0x25c/0x4c0
> [<a80000000006bf30>] worker_thread+0x1c0/0x690
> [<a800000000072da8>] kthread+0x148/0x178
> [<a800000000025b08>] ret_from_kernel_thread+0x14/0x1c
> Code: 000210f8  0202102d  dc420000 <b2420000> b6420007  24120000  5640ffd1  02002025  1000ff88 
> 
> Unhandled kernel unaligned access[#2]:
> ---[ end trace 8dd03d5368f266cc ]---
> 
> -- 
> SUSE Software Solutions Germany GmbH
> HRB 247165 (AG München)
> Geschäftsführer: Felix Imendörffer

-- 
Sincerely yours,
Mike.

Re: [PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Thomas Bogendoerfer]

On Thu, 5 Sep 2019 18:47:49 +0300
Mike Rapoport <rppt@kernel.org> wrote:

> On Thu, Sep 05, 2019 at 03:48:31PM +0200, Thomas Bogendoerfer wrote:
> > On Thu, 5 Sep 2019 16:32:53 +0300
> > Mike Rapoport <rppt@kernel.org> wrote:
> > 
> > > On Thu, Sep 05, 2019 at 03:21:50PM +0200, Thomas Bogendoerfer wrote:
> > > > On Thu,  5 Sep 2019 08:47:57 +0300
> > > > Mike Rapoport <rppt@kernel.org> wrote:
> > > > 
> > > > > From: Mike Rapoport <rppt@linux.ibm.com>
> > > > > 
> > > > > The memory initialization of SGI-IP27 is already half-way to support
> > > > > SPARSEMEM and only a call to sparse_init() was missing. Add it to
> > > > > prom_meminit() and adjust arch/mips/Kconfig to enable SPARSEMEM and
> > > > > SPARSEMEM_EXTREME for SGI-IP27
> > > > > 
> > > > > Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
> > > > > ---
> > > > > 
> > > > > Thomas, could you please test this on your Origin machine?
> > > > 
> > > > it crashes in sparse_early_usemaps_alloc_pgdat_section(). Since there is
> > > > already a sparse_init() in arch_mem_setup() I removed it from ip27-memory.c.
> > > 
> > > Oops, missed that.
> > > 
> > > > With this booting made more progress but I get an unaligned access in
> > > > kernel_init_free_pages(). 
> > > 
> > > Can you please share the log?
> > 
> > sure
> 
> Nothing looked particularly suspicious, but I've found that I've missed the
> definition of pfn_to_nid() is for DISCONTIGMEM only, maybe making it
> available for SPARSE would help :)
> 
> I'm pretty much shooting in the dark here, but can you please try the patch
> below on top of the original one:

doesn't compile: 

/home/tbogendoerfer/wip/mips/linux/include/linux/mmzone.h:1367:0: warning: "pfn_to_nid" redefined
 #define pfn_to_nid(pfn)       \


For testing I've removed the version in linux/mmzone.h, but kernel still crashes. Only
difference is that several CPUs are printing the oops in unaligned handler in parallel.
With the sparse_init() in prom_meminit() kernel dies at the same spot as before.

Thomas.

-- 
SUSE Software Solutions Germany GmbH
HRB 247165 (AG München)
Geschäftsführer: Felix Imendörffer

Re: [PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Mike Rapoport]

On Thu, Sep 05, 2019 at 11:38:00PM +0200, Thomas Bogendoerfer wrote:
> On Thu, 5 Sep 2019 18:47:49 +0300
> Mike Rapoport <rppt@kernel.org> wrote:
> 
> > On Thu, Sep 05, 2019 at 03:48:31PM +0200, Thomas Bogendoerfer wrote:
> > > On Thu, 5 Sep 2019 16:32:53 +0300
> > > Mike Rapoport <rppt@kernel.org> wrote:
> > > 
> > > > On Thu, Sep 05, 2019 at 03:21:50PM +0200, Thomas Bogendoerfer wrote:
> > > > > On Thu,  5 Sep 2019 08:47:57 +0300
> > > > > Mike Rapoport <rppt@kernel.org> wrote:
> > > > > 
> > > > > > From: Mike Rapoport <rppt@linux.ibm.com>
> > > > > > 
> > > > > > The memory initialization of SGI-IP27 is already half-way to support
> > > > > > SPARSEMEM and only a call to sparse_init() was missing. Add it to
> > > > > > prom_meminit() and adjust arch/mips/Kconfig to enable SPARSEMEM and
> > > > > > SPARSEMEM_EXTREME for SGI-IP27
> > > > > > 
> > > > > > Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
> > > > > > ---
> > > > > > 
> > > > > > Thomas, could you please test this on your Origin machine?
> > > > > 
> > > > > it crashes in sparse_early_usemaps_alloc_pgdat_section(). Since there is
> > > > > already a sparse_init() in arch_mem_setup() I removed it from ip27-memory.c.
> > > > 
> > > > Oops, missed that.
> > > > 
> > > > > With this booting made more progress but I get an unaligned access in
> > > > > kernel_init_free_pages(). 
> > > > 
> > > > Can you please share the log?
> > > 
> > > sure
> > 
> > Nothing looked particularly suspicious, but I've found that I've missed the
> > definition of pfn_to_nid() is for DISCONTIGMEM only, maybe making it
> > available for SPARSE would help :)
> > 
> > I'm pretty much shooting in the dark here, but can you please try the patch
> > below on top of the original one:
> 
> doesn't compile: 
> 
> /home/tbogendoerfer/wip/mips/linux/include/linux/mmzone.h:1367:0: warning: "pfn_to_nid" redefined
>  #define pfn_to_nid(pfn)       \
> 
> 
> For testing I've removed the version in linux/mmzone.h, but kernel still crashes. Only
> difference is that several CPUs are printing the oops in unaligned handler in parallel.
> With the sparse_init() in prom_meminit() kernel dies at the same spot as before.

Well, apparently the generic pfn_to_nid() is better :)

I suspect that unaligned access comes from __page_to_pfn, can you please
check what scripts/fadd2line reports for kernel_init_free_pages+0xcc/0x138?

> Thomas.
> 
> -- 
> SUSE Software Solutions Germany GmbH
> HRB 247165 (AG München)
> Geschäftsführer: Felix Imendörffer

-- 
Sincerely yours,
Mike.

Re: [PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Thomas Bogendoerfer]

On Fri, 6 Sep 2019 16:02:24 +0300
Mike Rapoport <rppt@kernel.org> wrote:

> I suspect that unaligned access comes from __page_to_pfn, can you please
> check what scripts/fadd2line reports for kernel_init_free_pages+0xcc/0x138?

kernel_init_free_pages+0xcc/0x138:
pagefault_disabled_dec at include/linux/uaccess.h:173
(inlined by) pagefault_enable at include/linux/uaccess.h:200
(inlined by) __kunmap_atomic at include/linux/highmem.h:101
(inlined by) clear_highpage at include/linux/highmem.h:215
(inlined by) kernel_init_free_pages at mm/page_alloc.c:1124

While making some sense out of this I booted the system a few times
with the same kernel and I get different crashes (it even booted once
to userspace).

Here a list (decoded with fadd2line)

cache_grow_begin+0x1bc/0x4b8:
__section_mem_map_addr at include/linux/mmzone.h:1263
(inlined by) lowmem_page_address at include/linux/mm.h:1302
(inlined by) alloc_slabmgmt at mm/slab.c:2298
(inlined by) cache_grow_begin at mm/slab.c:2625

kfree+0x90/0x1d0:
__section_mem_map_addr at include/linux/mmzone.h:1263
(inlined by) virt_to_head_page at include/linux/mm.h:751
(inlined by) virt_to_cache at mm/slab.h:408
(inlined by) kfree at mm/slab.c:3748

kfree+0xac/0x1d0:
__read_once_size at include/linux/compiler.h:199
(inlined by) compound_head at include/linux/page-flags.h:174
(inlined by) virt_to_head_page at include/linux/mm.h:753
(inlined by) virt_to_cache at mm/slab.h:408
(inlined by) kfree at mm/slab.c:3748

___cache_free+0x120/0x540:
page_to_nid at include/linux/mm.h:1088
(inlined by) cache_free_alien at mm/slab.c:785
(inlined by) ___cache_free at mm/slab.c:3449

free_block+0xe8/0x2c0:
__read_once_size at include/linux/compiler.h:199
(inlined by) compound_head at include/linux/page-flags.h:174
(inlined by) virt_to_head_page at include/linux/mm.h:753
(inlined by) free_block at mm/slab.c:3342

copy_process+0x254/0x1738:
__section_mem_map_addr at include/linux/mmzone.h:1263
(inlined by) lowmem_page_address at include/linux/mm.h:1302
(inlined by) alloc_thread_stack_node at kernel/fork.c:252
(inlined by) dup_task_struct at kernel/fork.c:855
(inlined by) copy_process at kernel/fork.c:1856

I couldn't make real sense out of this yet, but maybe it gives
a hint for you.

Thomas.

-- 
SUSE Software Solutions Germany GmbH
HRB 247165 (AG München)
Geschäftsführer: Felix Imendörffer

Re: [PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Mike Rapoport]

On Mon, Sep 09, 2019 at 06:22:42PM +0200, Thomas Bogendoerfer wrote:
> On Fri, 6 Sep 2019 16:02:24 +0300
> Mike Rapoport <rppt@kernel.org> wrote:
> 
> > I suspect that unaligned access comes from __page_to_pfn, can you please
> > check what scripts/fadd2line reports for kernel_init_free_pages+0xcc/0x138?
> 
> kernel_init_free_pages+0xcc/0x138:
> pagefault_disabled_dec at include/linux/uaccess.h:173
> (inlined by) pagefault_enable at include/linux/uaccess.h:200
> (inlined by) __kunmap_atomic at include/linux/highmem.h:101
> (inlined by) clear_highpage at include/linux/highmem.h:215
> (inlined by) kernel_init_free_pages at mm/page_alloc.c:1124
> 
> While making some sense out of this I booted the system a few times
> with the same kernel and I get different crashes (it even booted once
> to userspace).
> 
> Here a list (decoded with fadd2line)

... 
 
> I couldn't make real sense out of this yet, but maybe it gives
> a hint for you.

Unfortunately, no :(

Before we start adding printks, can you please run with
CONFIG_DEBUG_MEMORY_INIT=y and with 

mminit_loglevel=4 ignore_loglevel

in the command line?

> Thomas.
> 
> -- 
> SUSE Software Solutions Germany GmbH
> HRB 247165 (AG München)
> Geschäftsführer: Felix Imendörffer

-- 
Sincerely yours,
Mike.

Re: [PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Thomas Bogendoerfer]

On Tue, 10 Sep 2019 12:32:44 +0100
Mike Rapoport <rppt@kernel.org> wrote:

> Before we start adding printks, can you please run with
> CONFIG_DEBUG_MEMORY_INIT=y and with 
> 
> mminit_loglevel=4 ignore_loglevel
> 
> in the command line?

here we go:

Linux version 5.3.0-rc5-01209-g6ba2d3aed465 (tbogendoerfer@samweis) (gcc version 6.1.1 20160621 (Red Hat Cross 6.1.1-2) (GCC)) #776 SMP Tue Sep 10 13:51:45 CEST 2019
ARCH: SGI-IP27
PROMLIB: ARC firmware Version 64 Revision 0
Discovered 8 cpus on 4 nodes
************** Topology ********************
    00 01 02 03 
00   0  1  2  2 
01   1  0  2  2 
02   2  2  0  1 
03   2  2  1  0 
Router 0: r 1 0 r
Router 1: r 3 2 r
printk: bootconsole [early0] enabled
CPU0 revision is: 00000e23 (R12000)
FPU revision is: 00000900
Checking for the multiply/shift bug... no.
Checking for the daddiu bug... no.
IP27: Running on node 0.
Node 0 has a primary CPU, CPU is running.
Node 0 has a secondary CPU, CPU is running.
Machine is in M mode.
Determined physical RAM map:
 memory: 00000000006ec000 @ 000000000001c000 (usable)
 memory: 0000000000058000 @ 0000000000708000 (usable after init)
 memory: 000000000002f000 @ 0000000000760000 (usable)
printk: debug: ignoring loglevel setting.
REPLICATION: ON nasid 0, ktext from nasid 0, kdata from nasid 0
REPLICATION: ON nasid 1, ktext from nasid 0, kdata from nasid 0
REPLICATION: ON nasid 2, ktext from nasid 0, kdata from nasid 0
REPLICATION: ON nasid 3, ktext from nasid 0, kdata from nasid 0
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 8192kB 2-way, linesize 128 bytes.
Zone ranges:
  Normal   [mem 0x0000000000000000-0x000000033bffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000000000-0x0000000023ffffff]
  node   0: [mem 0x0000000028000000-0x000000002bffffff]
  node   0: [mem 0x0000000030000000-0x0000000033ffffff]
  node   0: [mem 0x0000000038000000-0x000000003bffffff]
  node   1: [mem 0x0000000100000000-0x0000000123ffffff]
  node   1: [mem 0x0000000128000000-0x000000012bffffff]
  node   1: [mem 0x0000000130000000-0x0000000133ffffff]
  node   1: [mem 0x0000000138000000-0x000000013bffffff]
  node   2: [mem 0x0000000200000000-0x0000000203ffffff]
  node   2: [mem 0x0000000208000000-0x000000020bffffff]
  node   2: [mem 0x0000000210000000-0x0000000213ffffff]
  node   2: [mem 0x0000000218000000-0x000000021bffffff]
  node   2: [mem 0x0000000220000000-0x0000000223ffffff]
  node   2: [mem 0x0000000228000000-0x000000022bffffff]
  node   2: [mem 0x0000000230000000-0x0000000233ffffff]
  node   2: [mem 0x0000000238000000-0x000000023bffffff]
  node   3: [mem 0x0000000300000000-0x0000000303ffffff]
  node   3: [mem 0x0000000308000000-0x000000030bffffff]
  node   3: [mem 0x0000000310000000-0x0000000313ffffff]
  node   3: [mem 0x0000000318000000-0x000000031bffffff]
  node   3: [mem 0x0000000320000000-0x0000000323ffffff]
  node   3: [mem 0x0000000328000000-0x000000032bffffff]
  node   3: [mem 0x0000000330000000-0x0000000333ffffff]
  node   3: [mem 0x0000000338000000-0x000000033bffffff]
mminit::pageflags_layout_widths Section 20 Node 6 Zone 1 Lastcpupid 0 Flags 22
mminit::pageflags_layout_shifts Section 20 Node 6 Zone 1 Lastcpupid 0
mminit::pageflags_layout_pgshifts Section 44 Node 38 Zone 37 Lastcpupid 0
mminit::pageflags_layout_nodezoneid Node/Zone ID: 44 -> 37
mminit::pageflags_layout_usage location: 64 -> 37 layout 37 -> 22 unused 22 -> 0 page-flags
Zeroed struct page in unavailable ranges: 376832 pages
Initmem setup node 0 [mem 0x0000000000000000-0x000000003bffffff]
On node 0 totalpages: 196608
  Normal zone: 2688 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 196608 pages, LIFO batch:63
mminit::memmap_init Initialising map node 0 zone 0 pfns 0 -> 245760
Initmem setup node 1 [mem 0x0000000100000000-0x000000013bffffff]
On node 1 totalpages: 196608
  Normal zone: 2688 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 196608 pages, LIFO batch:63
mminit::memmap_init Initialising map node 1 zone 0 pfns 1048576 -> 1294336
Initmem setup node 2 [mem 0x0000000200000000-0x000000023bffffff]
On node 2 totalpages: 131072
  Normal zone: 1792 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 131072 pages, LIFO batch:31
mminit::memmap_init Initialising map node 2 zone 0 pfns 2097152 -> 2342912
Initmem setup node 3 [mem 0x0000000300000000-0x000000033bffffff]
On node 3 totalpages: 131072
  Normal zone: 1792 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 131072 pages, LIFO batch:31
mminit::memmap_init Initialising map node 3 zone 0 pfns 3145728 -> 3391488
percpu: Embedded 19 pages/cpu s39584 r8192 d30048 u77824
pcpu-alloc: s39584 r8192 d30048 u77824 alloc=19*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
CPU 0 clock is 300MHz.
mminit::zonelist general 0:Normal = 0:Normal 1:Normal 2:Normal 3:Normal 
mminit::zonelist thisnode 0:Normal = 0:Normal 
mminit::zonelist general 1:Normal = 1:Normal 3:Normal 2:Normal 0:Normal 
mminit::zonelist thisnode 1:Normal = 1:Normal 
mminit::zonelist general 2:Normal = 2:Normal 3:Normal 1:Normal 0:Normal 
mminit::zonelist thisnode 2:Normal = 2:Normal 
mminit::zonelist general 3:Normal = 3:Normal 2:Normal 1:Normal 0:Normal 
mminit::zonelist thisnode 3:Normal = 3:Normal 
Built 4 zonelists, mobility grouping on.  Total pages: 646400
Policy zone: Normal
Kernel command line: root=dksc(0,1,0) ip=dhcp root=/dev/nfs mminit_loglevel=4 ignore_loglevel
printk: log_buf_len individual max cpu contribution: 4096 bytes
printk: log_buf_len total cpu_extra contributions: 28672 bytes
printk: log_buf_len min size: 32768 bytes
printk: log_buf_len: 65536 bytes
printk: early log buf free: 25360(77%)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 2550028K/2621440K available (5530K kernel code, 345K rwdata, 1196K rodata, 352K init, 186K bss, 71412K reserved, 0K cma-reserved)
rcu: Hierarchical RCU implementation.
rcu: 	RCU event tracing is enabled.
rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 256
clocksource: HUB-RT: mask: 0xfffffffffffff max_cycles: 0x127350b88, max_idle_ns: 1763180808480 ns
sched_clock: 52 bits at 1250kHz, resolution 800ns, wraps every 4398046510800ns
Calibrating delay loop... 449.02 BogoMIPS (lpj=898048)
pid_max: default: 32768 minimum: 301
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, vmalloc)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, vmalloc)
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
Checking for the daddi bug... no.
rcu: Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 8192kB 2-way, linesize 128 bytes.
CPU 1 clock is 300MHz.
CPU1 revision is: 00000e23 (R12000)
FPU revision is: 00000900
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 8192kB 2-way, linesize 128 bytes.
CPU 2 clock is 300MHz.
CPU2 revision is: 00000e23 (R12000)
FPU revision is: 00000900
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 8192kB 2-way, linesize 128 bytes.
CPU 3 clock is 300MHz.
CPU3 revision is: 00000e23 (R12000)
FPU revision is: 00000900
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 8192kB 2-way, linesize 128 bytes.
CPU 4 clock is 300MHz.
CPU4 revision is: 00000e23 (R12000)
FPU revision is: 00000900
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 8192kB 2-way, linesize 128 bytes.
CPU 5 clock is 300MHz.
CPU5 revision is: 00000e23 (R12000)
FPU revision is: 00000900
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 8192kB 2-way, linesize 128 bytes.
CPU 6 clock is 300MHz.
CPU6 revision is: 00000e23 (R12000)
FPU revision is: 00000900
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 8192kB 2-way, linesize 128 bytes.
CPU 7 clock is 300MHz.
CPU7 revision is: 00000e23 (R12000)
FPU revision is: 00000900
smp: Brought up 4 nodes, 8 CPUs
random: get_random_u32 called from bucket_table_alloc.isra.11+0x70/0x260 with crng_init=0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 6, 262144 bytes, vmalloc)
NET: Registered protocol family 16
xtalk:n0/0 xbow widget
xtalk:n0/8 bridge widget
xtalk:n0/c bridge widget
xtalk:n1/0 xbow widget
xtalk:n2/0 xbow widget
xtalk:n3/0 xbow widget
xtalk:n3/b bridge widget
xtalk:n3/e bridge widget
SCSI subsystem initialized
clocksource: Switched to clocksource HUB-RT
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, vmalloc)
TCP established hash table entries: 32768 (order: 6, 262144 bytes, vmalloc)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes, vmalloc)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes, vmalloc)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, vmalloc)
NET: Registered protocol family 1
CPU 4 Unable to handle kernel paging request at virtual address 0000000200d0f9c0, epc == a800000000169874, ra == a8000000001697f4
Oops[#1]:
CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc5-01209-g6ba2d3aed465 #776
$ 0   : 0000000000000000 ffffffff94001ce0 fffffffffffffff0 0000000200d0f9b8
$ 4   : 0000000000d0f9b8 0000000000000000 000000000003bb51 a80000003bb512e8
$ 8   : 00000000000000ff a80000033bef1330 0000000000000000 a800000001bdcfa0
$12   : 0000000000000000 a800000000578838 0000000000af515d 00000000000000c0
$16   : a80000000006b230 a80000003bb512e0 ffffffff94001ce1 a8000000006d8270
$20   : a80000003bb512e8 a80000003bb512e0 a80000003b17ac00 a80000003b8064a0
$24   : 0000000000000000 0000000000780000                                  
$28   : a80000003ba10000 a80000003ba13c60 0000000000000040 a8000000001697f4
Hi    : 0000000000000000
Lo    : 0000000000000000
epc   : a800000000169874 kfree+0xac/0x1d0
ra    : a8000000001697f4 kfree+0x2c/0x1d0
Status: 94001ce2	KX SX UX KERNEL EXL 
Cause : 00008008 (ExcCode 02)
BadVA : 0000000200d0f9c0
PrId  : 00000e23 (R12000)
Modules linked in:
Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
Stack : a80000023bde5800 0000000000000040 a80000033bef1320 a80000000006b230
        a80000033bef1328 a80000003b8064a8 a80000003b17ac00 a80000003b8064a0
        a80000003b17ac20 a80000003b17ac10 a8000000006e0000 0000000000000000
        0000000000000006 a800000000708414 a800000000760000 a80000000006b2e8
        a80000003b17ac00 a80000000006f6ec a80000003ba13d68 a800000000733ae4
        0000000000000000 a8000000007019a8 0000000000000000 a800000000760000
        a80000000073417c a800000000745b18 a800000000737a10 a800000000760000
        0000000000000006 a800000000708414 a800000000760000 a800000000546330
        a800000000760000 0000000000000000 0000000000000000 a8000000005453e0
        fffffffffffffffc a80000033bf0a459 0000000000000000 a800000000760000
        ...
Call Trace:
[<a800000000169874>] kfree+0xac/0x1d0
[<a80000000006b230>] apply_wqattrs_prepare+0x288/0x2f8
[<a80000000006b2e8>] apply_workqueue_attrs_locked+0x48/0xb8
[<a80000000006f6ec>] alloc_workqueue+0x1ec/0x5d0
[<a800000000546330>] rpc_init_mempool+0x58/0x208
[<a800000000734190>] init_sunrpc+0x14/0xac
[<a80000000001c604>] do_one_initcall+0x54/0x250
[<a80000000070932c>] kernel_init_freeable+0x250/0x370
[<a80000000057a0e8>] kernel_init+0x10/0x1c0
[<a800000000025b08>] ret_from_kernel_thread+0x14/0x1c
Code: 00621824  000420f8  0064182d <dc620008> 30440001  6442ffff  0044180b  dc620008  30440001 

Unhandled kernel unaligned access[#2]:
---[ end trace 2ab2a60260911a25 ]---
CPU: 2 PID: 2 Comm: kthreadd Tainted: G      D           5.3.0-rc5-01209-g6ba2d3aed465 #776
$ 0   : 0000000000000000 ffffffff94001ce0 0000000000000000 0000000000000000
$ 4   : a80000003ba14000 00000000005882a0 15b6dbb727684e00 0000000000000201
CPU 4 Unable to handle kernel paging request at virtual address 00000000045185b8, epc == a8000000001682c0, ra == a800000000168abc
$ 8   : a8000000006d8000 a8000000006d8000 ffffffffffffffff 0000000000000001
$12   : ffffffff94001ce1 000000001000001e 00000000006d0000 000000000000001e
$16   : a80000003ba178c0 fffffffffc800000 15b6dbb727684000 0000000000000000
$20   : a80000000003fcd8 a80000000014c854 a80000010109ece0 0000000000000000
$24   : a80000013bdfbdc0 0000000000770000                                  
$28   : a80000003ba14000 a80000003ba17860 a80000010109ece0 a800000000026700
Hi    : fb49249256e9acb0
Lo    : 90b6db6dbb727684
epc   : a80000000002e854 do_ade+0x314/0x7d0
ra    : a800000000026700 handle_ades_int+0x2c/0x4c
Status: 94001ce3	KX SX UX KERNEL EXL IE 
Cause : 00008014 (ExcCode 05)
BadVA : 15b6dbb727684000
PrId  : 00000e23 (R12000)
Modules linked in:
Process kthreadd (pid: 2, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
Stack : 0000000000000000 0000000000000000 0000000000000000 0000000000000000
        6db6db6db6db6db7 a80000010109edc0 a800000000000000 a800000000780000
        fffffffffffffff0 a80000010109ece0 a80000010109ece0 a800000000026700
        0000000000000000 ffffffff94001ce0 0000000000000130 a80000033be1ed30
        15b6dbb727684000 0000000000000004 15b6dbb727684e00 0000000000000201
        a8000000006d8000 a8000000006d8000 ffffffffffffffff 0000000000000001
        a80000003ba17fe0 0000000000001c00 00000000006d0000 000000000000001e
        6db6db6db6db6db7 a80000010109edc0 a800000000000000 a800000000780000
        fffffffffffffff0 a80000010109ece0 a80000010109ece0 0000000000000000
        a80000013bdfbdc0 0000000000770000 0000000000000001 a8000000006d8000
        ...
Call Trace:
[<a80000000002e854>] do_ade+0x314/0x7d0
[<a800000000026700>] handle_ades_int+0x2c/0x4c
[<a80000000014c854>] kernel_init_free_pages+0xcc/0x138
[<a80000000014ca7c>] prep_new_page+0x154/0x160
[<a800000000151108>] get_page_from_freelist+0xab8/0x11c8
[<a800000000151f80>] __alloc_pages_nodemask+0x140/0xe68
[<a80000000004a360>] copy_process+0x210/0x1738
[<a80000000004ba98>] _do_fork+0x90/0x2f0
[<a80000000004bd68>] kernel_thread+0x50/0x60
[<a8000000000742f8>] kthreadd+0x180/0x208
[<a800000000025b08>] ret_from_kernel_thread+0x14/0x1c
Code: 000210f8  0202102d  dc420000 <b2420000> b6420007  24120000  5640ffd1  02002025  1000ff88 

Oops[#3]:
---[ end trace 2ab2a60260911a26 ]---
CPU: 4 PID: 1 Comm: swapper/0 Tainted: G      D           5.3.0-rc5-01209-g6ba2d3aed465 #776
$ 0   : 0000000000000000 ffffffff94001ce0 fffffffffffffff0 00000000045185b8
$ 4   : 0000000000760000 0000000000000004 000000000013bdd1 00000000006e0000
$ 8   : 0000000000780000 0000000000000000 6162326136303236 3039313161323520
$12   : 00000000006e0000 00000000006d0000 a800000000780000 0000000000780000
$16   : 0000000001484000 a80000013bdd1080 a80000023bc23380 a80000000075a640
$20   : a80000013bdd10a8 a80000003ba0d380 a80000003ba0d380 a80000003b8064a0
$24   : 0000000000000004 0000000000780000                                  
$28   : a80000003ba10000 a80000003ba13950 0000000000000001 a800000000168abc
Hi    : 0000000000000000
Lo    : 00342b42e0000000
epc   : a8000000001682c0 ___cache_free+0x120/0x540
ra    : a800000000168abc kmem_cache_free+0x4c/0x260
Status: 94001ce2	KX SX UX KERNEL EXL 
Cause : 00008008 (ExcCode 02)
BadVA : 00000000045185b8
PrId  : 00000e23 (R12000)
Modules linked in:
Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
Stack : ffffffff94001ce1 0000000000000001 0000000000000000 0000000000000000
        00000000000000f4 a80000013bdd1080 a80000000019a13c ffffffff94001ce1
        0000000000000001 a80000013bdd10a8 a80000003ba0d380 a80000003ba0d380
        a80000003b8064a0 a800000000168abc a80000023bc23380 0000000000000000
        0000000000000000 0000000000000040 a80000013bdd1080 a80000000019a13c
        000000003ba13b30 0000000000000000 0000000000000000 000000000000000b
        a80000003ba13b30 0000000000000000 0000000000000000 a80000000004fb24
        0000000000000001 a8000000000a6cc4 a80000003ba13a68 0000000000000000
        0000000000000000 0000000000000000 a800000000768420 000000000000000b
        a80000003ba13b30 a80000000063c7c0 0000000000000000 a80000003bb512e0
        ...
Call Trace:
[<a8000000001682c0>] ___cache_free+0x120/0x540
[<a800000000168abc>] kmem_cache_free+0x4c/0x260
[<a80000000019a13c>] put_files_struct+0x11c/0x140
[<a80000000004fb24>] do_exit+0x6d4/0xaf0
[<a80000000002c494>] die+0x154/0x188
[<a80000000003cde8>] do_page_fault+0x578/0x580
[<a800000000042eb4>] tlb_do_page_fault_0+0x124/0x12c
[<a8000000001697f4>] kfree+0x2c/0x1d0
[<a80000000006b230>] apply_wqattrs_prepare+0x288/0x2f8
[<a80000000006b2e8>] apply_workqueue_attrs_locked+0x48/0xb8
[<a80000000006f6ec>] alloc_workqueue+0x1ec/0x5d0
[<a800000000546330>] rpc_init_mempool+0x58/0x208
[<a800000000734190>] init_sunrpc+0x14/0xac
[<a80000000001c604>] do_one_initcall+0x54/0x250
[<a80000000070932c>] kernel_init_freeable+0x250/0x370
[<a80000000057a0e8>] kernel_init+0x10/0x1c0
[<a800000000025b08>] ret_from_kernel_thread+0x14/0x1c
Code: 000318f8  0064182d  3c040076 <dc740000> 3c03a800  64844090  00051078  64630000  0045102d 

---[ end trace 2ab2a60260911a27 ]---
Fixing recursive fault but reboot is needed!
CPU 1 Unable to handle kernel paging request at virtual address 0000000200cf6f18, epc == a8000000001682c0, ra == a800000000168abc
CPU 3 Unable to handle kernel paging request at virtual address 0000000004519ff8, epc == a8000000001682c0, ra == a800000000168abc
CPU 2 Unable to handle kernel paging request at virtual address 0000000004519ff8, epc == a8000000001682c0, ra == a800000000168abc
Oops[#4]:
CPU 7 Unable to handle kernel paging request at virtual address 000000000b518510, epc == a8000000001682c0, ra == a800000000168abc
CPU 6 Unable to handle kernel paging request at virtual address 000000000b518510, epc == a8000000001682c0, ra == a800000000168abc
CPU: 3 PID: 0 Comm: swapper/3 Tainted: G      D           5.3.0-rc5-01209-g6ba2d3aed465 #776
$ 0   : 0000000000000000 ffffffff94001ce0 fffffffffffffff0 0000000004519ff8
$ 4   : 0000000000760000 0000000000000003 000000000013be49 00000000006e0000
$ 8   : 0000000000780000 00000000006d0000 00000000006d0000 0000000000000000
$12   : 0000000000000002 a800000000578834 0000000000000001 0000000000000001
$16   : 0000000001471000 a80000013be49e00 a80000003b851c00 a8000000007597f0
$20   : ffffffff94001ce1 a8000000006b8148 0000000000000010 a8000000006b8140
$24   : a8000000006e28e8 a800000000330a90                                  
$28   : a80000013bde0000 a80000003b823e00 0000000000000002 a800000000168abc
Hi    : 0000000000000000
Lo    : 0000000000000000
epc   : a8000000001682c0 ___cache_free+0x120/0x540
ra    : a800000000168abc kmem_cache_free+0x4c/0x260
Status: 94001ce2	KX SX UX KERNEL EXL 
Cause : 00008008 (ExcCode 02)
BadVA : 0000000004519ff8
PrId  : 00000e23 (R12000)
Modules linked in:
Process swapper/3 (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
Stack : a800000001bb95e0 0000000000000003 0000000000000000 a80000003b823e70
        0000000000000000 a80000013be49e00 a8000000000be054 ffffffff94001ce1
        a800000001bc24d0 ffffffff94001ce1 a8000000006b8148 0000000000000010
        a8000000006b8140 a800000000168abc a80000003b851c00 a8000000000bd2a4
        a800000001bc2480 000000000000000a a8000000006e4000 a8000000000be054
        a80000013bfe6800 a80000013bfe6800 ffffffffffffffff 0000000000000000
        0000000000000009 a8000000006d8000 a8000000006b8100 0000000000000002
        0000000000000100 a8000000006b8148 0000000000000010 a800000000580d0c
        0000000958568600 a8000000007485a8 a800000000750080 000000000000000a
        a80000000063e170 a8000000005893b0 a800000000748538 00000000fffee4de
        ...
Call Trace:
[<a8000000001682c0>] ___cache_free+0x120/0x540
[<a800000000168abc>] kmem_cache_free+0x4c/0x260
[<a8000000000be054>] rcu_core+0x434/0x5c8
[<a800000000580d0c>] __do_softirq+0x26c/0x470
[<a800000000051be8>] irq_exit+0xd8/0xe0
[<a800000000330c00>] plat_irq_dispatch+0xc8/0x118
[<a800000000025ed0>] handle_int+0x160/0x16c
[<a800000000578928>] arch_local_irq_restore+0x18/0x20
Code: 000318f8  0064182d  3c040076 <dc740000> 3c03a800  64844090  00051078  64630000  0045102d 

Oops[#5]:
---[ end trace 2ab2a60260911a28 ]---
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G      D           5.3.0-rc5-01209-g6ba2d3aed465 #776
$ 0   : 0000000000000000 ffffffff94001ce0 fffffffffffffff0 0000000004519ff8
Kernel panic - not syncing: Fatal exception in interrupt
$ 4   : 0000000000760000 0000000000000002 000000000013be49 00000000006e0000
------------[ cut here ]------------
$ 8   : 0000000000780000 00000000006d0000 00000000006d0000 0000000000000000
WARNING: CPU: 3 PID: 0 at /home/tbogendoerfer/wip/mips/linux/kernel/smp.c:433 smp_call_function_many+0x488/0x4f8
Modules linked in:
$12   : 0000000000000002 a800000000578834 0000000000000001 0000000000000001
CPU: 3 PID: 0 Comm: swapper/3 Tainted: G      D           5.3.0-rc5-01209-g6ba2d3aed465 #776
$16   : 000000000145e000 a80000013be49d00 a80000003b851c00 a8000000007597f0
Stack : ffffffff94001ce0 ffffffff94001ce0 0000000000000000 0000000000790000
$20   : ffffffff94001ce1 0000000000000004 0000000000000000 a8000000006b8140
        0000000000000000 0000000000000000 a800000000790000 a800000000771618
$24   : 0000000000000004 a800000000330a90                                  
        a80000000003c090 0000000000000000 0000000000000030 0000000000000001
$28   : a80000013bddc000 a80000003b81fe00 0000000000000002 a800000000168abc
        00000000006e0000 00000000006d0000 a800000000780000 0000000000780000
Hi    : 0000000000000000
Lo    : 0000000000000000
        0000000000000000 ffffffffffffffff ffffffff94001ce0 a800000000700000
epc   : a8000000001682c0 ___cache_free+0x120/0x540
ra    : a800000000168abc kmem_cache_free+0x4c/0x260
        00000000000001b1 0000000000000000 a8000000000309e8 0000000000000000
Status: 94001ce2	KX SX UX KERNEL EXL 
        0000000000000010 0000000000780000 0000000000000018 a800000000760018
Cause : 00008008 (ExcCode 02)
BadVA : 0000000004519ff8
        a80000013bde0000 a80000003b823980 a8000000006d0000 a80000000055f684
PrId  : 00000e23 (R12000)
Modules linked in:
        0000000000000000 0000000000000000 0000000000000000 ffffffff94001ce0
Process swapper/2 (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
Stack : a800000001ba65e0 0000000000000002 0000000000000000 a80000003b81fe70
        a800000000700000 a80000000002c1c4 0000000000000000 a80000000055f684
        0000000000000400 a80000013be49d00 a8000000000be054 ffffffff94001ce1
        ...
        a800000001baf4d0 ffffffff94001ce1 0000000000000004 0000000000000000
Call Trace:
[<a80000000002c1c4>] show_stack+0x94/0x138
        a8000000006b8140 a800000000168abc a80000003b851c00 a8000000006e4000
[<a80000000055f684>] dump_stack+0xb4/0xf0
        a800000001baf480 000000000000000a a8000000006e4000 a8000000000be054
[<a80000000004cc14>] __warn+0x14c/0x170
        a80000013bffbb80 a80000013bffbb80 ffffffffffffffff 0000000000000000
[<a8000000000dd200>] smp_call_function_many+0x488/0x4f8
        0000000000000009 a8000000006d8000 a8000000006b8100 0000000000000002
[<a8000000000dd2a8>] smp_call_function+0x38/0x48
        0000000000000100 a8000000006b8148 0000000000000010 a800000000580d0c
[<a80000000004cea4>] panic+0x174/0x410
        0000000958568600 a8000000007485a8 a800000000750080 000000000000000a
[<a80000000002c4b0>] die+0x170/0x188
 [<<aa8800000000000000000033ccddee88>>]]  ddoo__ppaaggee__ffaauulltt++00xx557788//00xx558800

 0 00 0 0  74 8 .53.8. 
00[<00a08000000f00ff00e0e404de2eb
C4>a]l l tlTrb_acdoe:_pa
g[<raee80+00x00102000/001x658420c
0>0]x 1_2_c_c
[ac<aac8h00e_00fr0e00e+010x684ca/bc0x>2] 60k[me<am8_0c0ac00h0e_00fr01e6e+8a0xbc4>c/] 0kxm2e60m_c
a-a-2-[9  ]e-nd- -t
r0axce4c 2/0axb22a60602
[6<_cao80re0+000x04003400/0beRseebocoontidsn.g. i
nc 1or ese+0cox4n3d4s/..0x5
c8
[<a800000000580d0c>] __do_softirq+0x26c/0x470
[<a800000000051be8>] irq_exit+0xd8/0xe0
[<a800000000330c00>] plat_irq_dispatch+0xc8/0x118
[<a800000000025ed0>] handle_int+0x160/0x16c
[<a800000000578928>] arch_local_irq_restore+0x18/0x20
Code: 000318f8  0064182d  3c040076 <dc740000> 3c03a800  64844090  00051078  64630000  0045102d 

Oops[#6]:
CPU: 7 PID: 0 Comm: swapper/7 Tainted: G      D W         5.3.0-rc5-01209-g6ba2d3aed465 #776
$ 0   : 0000000000000000 ffffffff94001ce0 fffffffffffffff0 000000000b518510
$ 4   : 0000000000760000 0000000000000007 000000000033bdce 00000000006e0000
$ 8   : 0000000000780000 00000000006d0000 00000000006d0000 0000000000000000
$12   : 0000000000000002 a800000000578834 0000000000000001 0000000000000001
$16   : 00000000014bd000 a80000033bdcef80 a80000003b851c00 a8000000007597f0
$20   : ffffffff94001ce1 a8000000006b8148 0000000000000010 a8000000006b8140
$24   : a8000003010c4050 a800000000330a90  R  e b o ot    s t a r t e d  f  r om   C  P U   3  
     
$28   : a80000033be08000 a80000003b833e00 0000000000000002 a800000000168abc
Hi    : 0000000000000000
Lo    : 0000000000000000
epc   : a8000000001682c0 ___cache_free+0x120/0x540
ra    : a800000000168abc kmem_cache_free+0x4c/0x260
Status: 94001ce2	KX SX UX KERNEL EXL 
Cause : 00008008 (ExcCode 02)
BadVA : 000000000b518510
PrId  : 00000e23 (R12000)
Modules linked in:
Process swapper/7 (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
Stack : a800000001c055e0 0000000000000007 0000017e00000000 a80000003b833e70
        0000000000000000 a80000033bdcef80 a8000000000be054 ffffffff94001ce1
        a800000001c0e4d0 ffffffff94001ce1 a8000000006b8148 0000000000000010
        a8000000006b8140 a800000000168abc a80000003b851c00 a800000000075b34
        a800000001c0e480 000000000000000a a8000000006e4000 a8000000000be054
        a80000033bef9768 a80000033bef9468 ffffffffffffffff 0000000000000000
        0000000000000009 a8000000006d8000 a8000000006b8100 0000000000000002
        0000000000000100 a8000000006b8148 0000000000000010 a800000000580d0c
        0000000958d09800 a8000000007485a8 a800000000750080 000000000000000a
        a80000000063e170 a8000000005893b0 a800000000748538 00000000fffee4e0
        ...
Call Trace:
[<a8000000001682c0>] ___cache_free+0x120/0x540
[<a800000000168abc>] kmem_cache_free+0x4c/0x260
[<a8000000000be054>] rcu_core+0x434/0x5c8
[<a800000000580d0c>] __do_softirq+0x26c/0x470
[<a800000000051be8>] irq_exit+0xd8/0xe0
[<a800000000330c00>] plat_irq_dispatch+0xc8/0x118
[<a800000000025ed0>] handle_int+0x160/0x16c
[<a800000000578928>] arch_local_irq_restore+0x18/0x20
Code: 000318f8  0064182d  3c040076 <dc740000> 3c03a800  64844090  00051078  64630000  0045102d 

Oops[#7]:
CPU: 6 PID: 0 Comm: swapper/6 Tainted: G      D W         5.3.0-rc5-01209-g6ba2d3aed465 #776
$ 0   : 0000000000000000 ffffffff94001ce0 fffffffffffffff0 000000000b518510
$ 4   : 0000000000760000 0000000000000006 000000000033bdce 00000000006e0000
$ 8   : 0000000000780000 00000000006d0000 00000000006d0000 0000000000000000
$12   : 0000000000000002 a800000000578834 0000000000000001 0000000000000001
$16   : 00000000014aa000 a80000033bdce380 a80000003b851c00 a8000000007597f0
$20   : ffffffff94001ce1 a8000000006b8148 0000000000000010 a8000000006b8140
$24   : 0000000000000000 a800000000330a90                                  
$28   : a80000033be00000 a80000003b82fe00 0000000000000002 a800000000168abc
Hi    : 0000000000000000
Lo    : 0000000000000000
epc   : a8000000001682c0 ___cache_free+0x120/0x540
ra    : a800000000168abc kmem_cache_free+0x4c/0x260
Status: 94001ce2	KX SX UX KERNEL EXL 
Cause : 0000c008 (ExcCode 02)
BadVA : 000000000b518510
PrId  : 00000e23 (R12000)
Modules linked in:
Process swapper/6 (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
Stack : a800000001bf25e0 fffffffffffffb68 0000017d01bfb4d0 a8000000000bc770
        0000000000000000 a80000033bdce380 a8000000000be054 ffffffff94001ce1
        a800000001bfb4d0 ffffffff94001ce1 a8000000006b8148 0000000000000010
        a8000000006b8140 a800000000168abc a80000003b851c00 a800000000075b34
        a800000001bfb480 000000000000000a a8000000006e4000 a8000000000be054
        a80000033bdce268 a80000033bf4f200 ffffffffffffffff 0000000000000000
        0000000000000009 a8000000006d8000 a8000000006b8100 0000000000000002
        0000000000000100 a8000000006b8148 0000000000000010 a800000000580d0c
        00000009590da100 a8000000007485a8 a800000000750080 000000000000000a
        a80000000063e170 a8000000005893b0 a800000000748538 00000000fffee4e1
        ...
Call Trace:
[<a8000000001682c0>] ___cache_free+0x120/0x540
[<a800000000168abc>] kmem_cache_free+0x4c/0x260
[<a8000000000be054>] rcu_core+0x434/0x5c8
[<a800000000580d0c>] __do_softirq+0x26c/0x470
[<a800000000051be8>] irq_exit+0xd8/0xe0
[<a800000000330c00>] plat_irq_dispatch+0xc8/0x118
[<a800000000025ed0>] handle_int+0x160/0x16c
[<a800000000080b28>] do_idle+0x128/0x1e8
[<a800000000080eec>] cpu_startup_entry+0x2c/0x40
Code: 000318f8  0064182d  3c040076 <dc740000> 3c03a800  64844090  00051078  64630000  0045102d 

Oops[#8]:
CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D W         5.3.0-rc5-01209-g6ba2d3aed465 #776
$ 0   : 0000000000000000 ffffffff94001ce0 fffffffffffffff0 0000000200cf6f18
$ 4   : 0000000000760000 0000000000000001 000000000003b445 00000000006e0000
$ 8   : 0000000000780000 00000000006d0000 00000000006d0000 0000000000000000
$12   : 0000000000000002 a800000000578834 0000000000000001 0000000000000001
$16   : 000000000144b000 a80000003b445f00 a80000013bc21980 c00000fefeb30b70
$20   : ffffffff94001ce1 a8000000006b8148 0000000000000010 a8000000006b8140
$24   : 0000000000000000 a800000000330a90                                  
$28   : a80000003ba5c000 a80000003b81be00 0000000000000002 a800000000168abc
Hi    : 0000000000000000
Lo    : 0000000000000000
epc   : a8000000001682c0 ___cache_free+0x120/0x540
ra    : a800000000168abc kmem_cache_free+0x4c/0x260
Status: 94001ce2	KX SX UX KERNEL EXL 
Cause : 00008008 (ExcCode 02)
BadVA : 0000000200cf6f18
PrId  : 00000e23 (R12000)
Modules linked in:
Process swapper/1 (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
Stack : a800000001b935e0 fffffffffffffb68 a800000001b9c4d0 a8000000000bc770
        0000000000000000 a80000003b445f00 a8000000000be054 ffffffff94001ce1
        a800000001b9c4d0 ffffffff94001ce1 a8000000006b8148 0000000000000010
        a8000000006b8140 a800000000168abc a80000013bc21980 a8000000000bd2a4
        a800000001b9c480 000000000000000a a8000000006e4000 a8000000000be054
        a80000003b263be8 a80000003b266a00 ffffffffffffffff 0000000000000000
        0000000000000009 a8000000006d8000 a8000000006b8100 0000000000000002
        0000000000000100 a8000000006b8148 0000000000000010 a800000000580d0c
        0000000958568600 a8000000007485a8 a800000000750080 000000000000000a
        a80000000063e170 a8000000005893b0 a800000000748538 00000000fffee4de
        ...
Call Trace:
[<a8000000001682c0>] ___cache_free+0x120/0x540
[<a800000000168abc>] kmem_cache_free+0x4c/0x260
[<a8000000000be054>] rcu_core+0x434/0x5c8
[<a800000000580d0c>] __do_softirq+0x26c/0x470
[<a800000000051be8>] irq_exit+0xd8/0xe0
[<a800000000330c00>] plat_irq_dispatch+0xc8/0x118
[<a800000000025ed0>] handle_int+0x160/0x16c
[<a800000000080b28>] do_idle+0x128/0x1e8
[<a800000000080eec>] cpu_startup_entry+0x2c/0x40
Code: 000318f8  0064182d  3c040076 <dc740000> 3c03a800  64844090  00051078  64630000  0045102d 

-- 
SUSE Software Solutions Germany GmbH
HRB 247165 (AG München)
Geschäftsführer: Felix Imendörffer

Re: [PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Thomas Bogendoerfer]

On Tue, 10 Sep 2019 12:32:44 +0100
Mike Rapoport <rppt@kernel.org> wrote:

> [..]

Patch below works on the same Origin.

Does memblocks_present() deal better with the one reserved page per node
than sparse_memory_present_with_active_regions() ? Or is there a better
explanation ? My debug prints didn't make sense out of it...

Thomas.

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d50fafd7bf3a..e4b02b5f3487 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -669,6 +669,7 @@ config SGI_IP22
 config SGI_IP27
 	bool "SGI IP27 (Origin200/2000)"
 	select ARCH_HAS_PHYS_TO_DMA
+	select ARCH_SPARSEMEM_ENABLE
 	select FW_ARC
 	select FW_ARC64
 	select BOOT_ELF64
@@ -2633,18 +2634,9 @@ config ARCH_FLATMEM_ENABLE
 	def_bool y
 	depends on !NUMA && !CPU_LOONGSON2
 
-config ARCH_DISCONTIGMEM_ENABLE
-	bool
-	default y if SGI_IP27
-	help
-	  Say Y to support efficient handling of discontiguous physical memory,
-	  for architectures which are either NUMA (Non-Uniform Memory Access)
-	  or have huge holes in the physical address space for other reasons.
-	  See <file:Documentation/vm/numa.rst> for more.
-
 config ARCH_SPARSEMEM_ENABLE
 	bool
-	select SPARSEMEM_STATIC
+	select SPARSEMEM_STATIC if !SGI_IP27
 
 config NUMA
 	bool "NUMA Support"
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index fb077a947575..370f2ba14a89 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -410,8 +410,6 @@ static void __init node_mem_init(cnodeid_t node)
 
 	memblock_reserve(slot_firstpfn << PAGE_SHIFT,
 			 ((slot_freepfn - slot_firstpfn) << PAGE_SHIFT));
-
-	sparse_memory_present_with_active_regions(node);
 }
 
 /*
@@ -444,6 +442,7 @@ void __init prom_meminit(void)
 		}
 		__node_data[node] = &null_node;
 	}
+	memblocks_present();
 }
 
 void __init prom_free_prom_memory(void)

-- 
SUSE Software Solutions Germany GmbH
HRB 247165 (AG München)
Geschäftsführer: Felix Imendörffer

Re: [PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Mike Rapoport]

On September 11, 2019 3:09:39 PM GMT+01:00, Thomas Bogendoerfer <tbogendoerfer@suse.de> wrote:
>On Tue, 10 Sep 2019 12:32:44 +0100
>Mike Rapoport <rppt@kernel.org> wrote:
>
>> [..]
>
>Patch below works on the same Origin.
>
>Does memblocks_present() deal better with the one reserved page per
>node
>than sparse_memory_present_with_active_regions() ? Or is there a better
>explanation ? My debug prints didn't make sense out of it...

To be honest, I'm really puzzled.
I'll take a closer look tomorrow.

Thanks for the debugging and fixing this :)

>Thomas.
>
>diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
>index d50fafd7bf3a..e4b02b5f3487 100644
>--- a/arch/mips/Kconfig
>+++ b/arch/mips/Kconfig
>@@ -669,6 +669,7 @@ config SGI_IP22
> config SGI_IP27
> 	bool "SGI IP27 (Origin200/2000)"
> 	select ARCH_HAS_PHYS_TO_DMA
>+	select ARCH_SPARSEMEM_ENABLE
> 	select FW_ARC
> 	select FW_ARC64
> 	select BOOT_ELF64
>@@ -2633,18 +2634,9 @@ config ARCH_FLATMEM_ENABLE
> 	def_bool y
> 	depends on !NUMA && !CPU_LOONGSON2
> 
>-config ARCH_DISCONTIGMEM_ENABLE
>-	bool
>-	default y if SGI_IP27
>-	help
>-	  Say Y to support efficient handling of discontiguous physical
>memory,
>-	  for architectures which are either NUMA (Non-Uniform Memory Access)
>-	  or have huge holes in the physical address space for other reasons.
>-	  See <file:Documentation/vm/numa.rst> for more.
>-
> config ARCH_SPARSEMEM_ENABLE
> 	bool
>-	select SPARSEMEM_STATIC
>+	select SPARSEMEM_STATIC if !SGI_IP27
> 
> config NUMA
> 	bool "NUMA Support"
>diff --git a/arch/mips/sgi-ip27/ip27-memory.c
>b/arch/mips/sgi-ip27/ip27-memory.c
>index fb077a947575..370f2ba14a89 100644
>--- a/arch/mips/sgi-ip27/ip27-memory.c
>+++ b/arch/mips/sgi-ip27/ip27-memory.c
>@@ -410,8 +410,6 @@ static void __init node_mem_init(cnodeid_t node)
> 
> 	memblock_reserve(slot_firstpfn << PAGE_SHIFT,
> 			 ((slot_freepfn - slot_firstpfn) << PAGE_SHIFT));
>-
>-	sparse_memory_present_with_active_regions(node);
> }
> 
> /*
>@@ -444,6 +442,7 @@ void __init prom_meminit(void)
> 		}
> 		__node_data[node] = &null_node;
> 	}
>+	memblocks_present();
> }
> 
> void __init prom_free_prom_memory(void)


-- 
Sincerely yours,
Mike

Re: [PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Mike Rapoport]

On Wed, Sep 11, 2019 at 04:09:39PM +0200, Thomas Bogendoerfer wrote:
> On Tue, 10 Sep 2019 12:32:44 +0100
> Mike Rapoport <rppt@kernel.org> wrote:
> 
> > [..]
> 
> Patch below works on the same Origin.
> 
> Does memblocks_present() deal better with the one reserved page per node
> than sparse_memory_present_with_active_regions() ? Or is there a better
> explanation ? My debug prints didn't make sense out of it...

I think the problem is that when we call
sparse_memory_present_with_active_regions() per node, the page for the node
data of the next nodes is not yet reserved and since memory_present() does
memblock allocations it may use that memory.

We can try to verify that with "memblock=debug" in the command line.

Another thing we could try to rule out the differences between
memblocks_present() and sparse_memory_present_with_active_regions() is to
replace memblocks_present() in your patch with
sparse_memory_present_with_active_regions(MAX_NUMNODES).

 
> Thomas.
> 
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index d50fafd7bf3a..e4b02b5f3487 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -669,6 +669,7 @@ config SGI_IP22
>  config SGI_IP27
>  	bool "SGI IP27 (Origin200/2000)"
>  	select ARCH_HAS_PHYS_TO_DMA
> +	select ARCH_SPARSEMEM_ENABLE
>  	select FW_ARC
>  	select FW_ARC64
>  	select BOOT_ELF64
> @@ -2633,18 +2634,9 @@ config ARCH_FLATMEM_ENABLE
>  	def_bool y
>  	depends on !NUMA && !CPU_LOONGSON2
>  
> -config ARCH_DISCONTIGMEM_ENABLE
> -	bool
> -	default y if SGI_IP27
> -	help
> -	  Say Y to support efficient handling of discontiguous physical memory,
> -	  for architectures which are either NUMA (Non-Uniform Memory Access)
> -	  or have huge holes in the physical address space for other reasons.
> -	  See <file:Documentation/vm/numa.rst> for more.
> -
>  config ARCH_SPARSEMEM_ENABLE
>  	bool
> -	select SPARSEMEM_STATIC
> +	select SPARSEMEM_STATIC if !SGI_IP27
>  
>  config NUMA
>  	bool "NUMA Support"
> diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
> index fb077a947575..370f2ba14a89 100644
> --- a/arch/mips/sgi-ip27/ip27-memory.c
> +++ b/arch/mips/sgi-ip27/ip27-memory.c
> @@ -410,8 +410,6 @@ static void __init node_mem_init(cnodeid_t node)
>  
>  	memblock_reserve(slot_firstpfn << PAGE_SHIFT,
>  			 ((slot_freepfn - slot_firstpfn) << PAGE_SHIFT));
> -
> -	sparse_memory_present_with_active_regions(node);
>  }
>  
>  /*
> @@ -444,6 +442,7 @@ void __init prom_meminit(void)
>  		}
>  		__node_data[node] = &null_node;
>  	}
> +	memblocks_present();
>  }
>  
>  void __init prom_free_prom_memory(void)
> 
> -- 
> SUSE Software Solutions Germany GmbH
> HRB 247165 (AG München)
> Geschäftsführer: Felix Imendörffer

-- 
Sincerely yours,
Mike.

Re: [PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Thomas Bogendoerfer]

On Thu, 12 Sep 2019 11:58:33 +0100
Mike Rapoport <rppt@kernel.org> wrote:

> On Wed, Sep 11, 2019 at 04:09:39PM +0200, Thomas Bogendoerfer wrote:
> > Does memblocks_present() deal better with the one reserved page per node
> > than sparse_memory_present_with_active_regions() ? Or is there a better
> > explanation ? My debug prints didn't make sense out of it...
> 
> I think the problem is that when we call
> sparse_memory_present_with_active_regions() per node, the page for the node
> data of the next nodes is not yet reserved and since memory_present() does
> memblock allocations it may use that memory.
> 
> We can try to verify that with "memblock=debug" in the command line.

see below

> Another thing we could try to rule out the differences between
> memblocks_present() and sparse_memory_present_with_active_regions() is to
> replace memblocks_present() in your patch with
> sparse_memory_present_with_active_regions(MAX_NUMNODES).

that works as well and produces the same debug output.

Important line of diff -u max_numnodes broken:

- memory size = 0x00000000b0000000 reserved size = 0x0000000004d1a360
+ memory size = 0x00000000b0000000 reserved size = 0x0000000004d12360

- reserved.cnt  = 0xe
+ reserved.cnt  = 0xd

- reserved[0xd]	[0x000000035bff8000-0x000000035bffffff], 0x0000000000008000 bytes flags: 0x0

I have no idea which reservation this is, but it's not from one of the node data.

Thomas.

bootlog with sparse_memory_present_with_active_regions(MAX_NUMNODES):

Determined physical RAM map:
 memory: 00000000006ec000 @ 000000000001c000 (usable)
 memory: 0000000000058000 @ 0000000000708000 (usable after init)
 memory: 000000000002f000 @ 0000000000760000 (usable)
printk: debug: ignoring loglevel setting.
memblock_alloc_try_nid: 192 bytes align=0x80 nid=0 from=0x0000000000000000 max_addr=0x0000000000000000 sparse_init_nid+0xa0/0x4ac
memblock_reserve: [0x0000000000791000-0x00000000007910bf] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid_raw: 14680064 bytes align=0x1000 nid=0 from=0x0000000001000000 max_addr=0x0000000000000000 sparse_init_nid+0x154/0x4ac
memblock_reserve: [0x0000000001000000-0x0000000001dfffff] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 3670016 bytes align=0x1000 nid=0 from=0x0000000001000000 max_addr=0x0000000000000000 __populate_section_memmap+0x3c/0x98
memblock_reserve: [0x0000000001e00000-0x000000000217ffff] memblock_alloc_range_nid+0x158/0x1fc
   memblock_free: [0x0000000001b80000-0x0000000001dfffff] sparse_init_nid+0x360/0x4ac
memblock_alloc_try_nid: 192 bytes align=0x80 nid=0 from=0x0000000000000000 max_addr=0x0000000000000000 sparse_init_nid+0xa0/0x4ac
memblock_reserve: [0x0000000000791100-0x00000000007911bf] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid_raw: 14680064 bytes align=0x1000 nid=1 from=0x0000000001000000 max_addr=0x0000000000000000 sparse_init_nid+0x154/0x4ac
memblock_reserve: [0x0000000100027000-0x0000000100e26fff] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 3670016 bytes align=0x1000 nid=1 from=0x0000000001000000 max_addr=0x0000000000000000 __populate_section_memmap+0x3c/0x98
memblock_reserve: [0x0000000100e27000-0x00000001011a6fff] memblock_alloc_range_nid+0x158/0x1fc
   memblock_free: [0x0000000100c00000-0x0000000100e26fff] sparse_init_nid+0x360/0x4ac
memblock_alloc_try_nid: 192 bytes align=0x80 nid=0 from=0x0000000000000000 max_addr=0x0000000000000000 sparse_init_nid+0xa0/0x4ac
memblock_reserve: [0x0000000000791200-0x00000000007912bf] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid_raw: 14680064 bytes align=0x1000 nid=2 from=0x0000000001000000 max_addr=0x0000000000000000 sparse_init_nid+0x154/0x4ac
memblock_reserve: [0x0000000200027000-0x0000000200e26fff] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 3670016 bytes align=0x1000 nid=2 from=0x0000000001000000 max_addr=0x0000000000000000 __populate_section_memmap+0x3c/0x98
memblock_reserve: [0x0000000200e27000-0x00000002011a6fff] memblock_alloc_range_nid+0x158/0x1fc
   memblock_free: [0x0000000200c00000-0x0000000200e26fff] sparse_init_nid+0x360/0x4ac
memblock_alloc_try_nid: 288 bytes align=0x80 nid=0 from=0x0000000000000000 max_addr=0x0000000000000000 sparse_init_nid+0xa0/0x4ac
memblock_reserve: [0x0000000000791300-0x000000000079141f] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid_raw: 22020096 bytes align=0x1000 nid=3 from=0x0000000001000000 max_addr=0x0000000000000000 sparse_init_nid+0x154/0x4ac
memblock_reserve: [0x0000000300027000-0x0000000301526fff] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 3670016 bytes align=0x1000 nid=3 from=0x0000000001000000 max_addr=0x0000000000000000 __populate_section_memmap+0x3c/0x98
memblock_reserve: [0x0000000301527000-0x00000003018a6fff] memblock_alloc_range_nid+0x158/0x1fc
   memblock_free: [0x0000000301400000-0x0000000301526fff] sparse_init_nid+0x360/0x4ac
memblock_reserve: [0x00000000006b8000-0x00000000006b7fff] setup_arch+0x44c/0x58c
MEMBLOCK configuration:
 memory size = 0x00000000b0000000 reserved size = 0x0000000004d1a360
 memory.cnt  = 0x1c
 memory[0x0]	[0x0000000000000000-0x0000000023ffffff], 0x0000000024000000 bytes on node 0 flags: 0x0
 memory[0x1]	[0x0000000028000000-0x000000002bffffff], 0x0000000004000000 bytes on node 0 flags: 0x0
 memory[0x2]	[0x0000000030000000-0x0000000033ffffff], 0x0000000004000000 bytes on node 0 flags: 0x0
 memory[0x3]	[0x0000000038000000-0x000000003bffffff], 0x0000000004000000 bytes on node 0 flags: 0x0
 memory[0x4]	[0x0000000100000000-0x0000000123ffffff], 0x0000000024000000 bytes on node 1 flags: 0x0
 memory[0x5]	[0x0000000128000000-0x000000012bffffff], 0x0000000004000000 bytes on node 1 flags: 0x0
 memory[0x6]	[0x0000000130000000-0x0000000133ffffff], 0x0000000004000000 bytes on node 1 flags: 0x0
 memory[0x7]	[0x0000000138000000-0x000000013bffffff], 0x0000000004000000 bytes on node 1 flags: 0x0
 memory[0x8]	[0x0000000200000000-0x0000000203ffffff], 0x0000000004000000 bytes on node 2 flags: 0x0
 memory[0x9]	[0x0000000208000000-0x000000020bffffff], 0x0000000004000000 bytes on node 2 flags: 0x0
 memory[0xa]	[0x0000000210000000-0x0000000213ffffff], 0x0000000004000000 bytes on node 2 flags: 0x0
 memory[0xb]	[0x0000000218000000-0x000000021bffffff], 0x0000000004000000 bytes on node 2 flags: 0x0
 memory[0xc]	[0x0000000220000000-0x0000000223ffffff], 0x0000000004000000 bytes on node 2 flags: 0x0
 memory[0xd]	[0x0000000228000000-0x000000022bffffff], 0x0000000004000000 bytes on node 2 flags: 0x0
 memory[0xe]	[0x0000000230000000-0x0000000233ffffff], 0x0000000004000000 bytes on node 2 flags: 0x0
 memory[0xf]	[0x0000000238000000-0x000000023bffffff], 0x0000000004000000 bytes on node 2 flags: 0x0
 memory[0x10]	[0x0000000300000000-0x0000000303ffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x11]	[0x0000000308000000-0x000000030bffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x12]	[0x0000000310000000-0x0000000313ffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x13]	[0x0000000318000000-0x000000031bffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x14]	[0x0000000320000000-0x0000000323ffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x15]	[0x0000000328000000-0x000000032bffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x16]	[0x0000000330000000-0x0000000333ffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x17]	[0x0000000338000000-0x000000033bffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x18]	[0x0000000340000000-0x0000000343ffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x19]	[0x0000000348000000-0x000000034bffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x1a]	[0x0000000350000000-0x0000000353ffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x1b]	[0x0000000358000000-0x000000035bffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 reserved.cnt  = 0xe
 reserved[0x0]	[0x0000000000000000-0x00000000007910bf], 0x00000000007910c0 bytes flags: 0x0
 reserved[0x1]	[0x0000000000791100-0x00000000007911bf], 0x00000000000000c0 bytes flags: 0x0
 reserved[0x2]	[0x0000000000791200-0x00000000007912bf], 0x00000000000000c0 bytes flags: 0x0
 reserved[0x3]	[0x0000000000791300-0x000000000079141f], 0x0000000000000120 bytes flags: 0x0
 reserved[0x4]	[0x0000000001000000-0x0000000001b7ffff], 0x0000000000b80000 bytes flags: 0x0
 reserved[0x5]	[0x0000000001e00000-0x000000000217ffff], 0x0000000000380000 bytes flags: 0x0
 reserved[0x6]	[0x000000003bfff000-0x000000003bffffff], 0x0000000000001000 bytes flags: 0x0
 reserved[0x7]	[0x0000000100000000-0x0000000100bfffff], 0x0000000000c00000 bytes flags: 0x0
 reserved[0x8]	[0x0000000100e27000-0x00000001011a6fff], 0x0000000000380000 bytes flags: 0x0
 reserved[0x9]	[0x0000000200000000-0x0000000200bfffff], 0x0000000000c00000 bytes flags: 0x0
 reserved[0xa]	[0x0000000200e27000-0x00000002011a6fff], 0x0000000000380000 bytes flags: 0x0
 reserved[0xb]	[0x0000000300000000-0x00000003013fffff], 0x0000000001400000 bytes flags: 0x0
 reserved[0xc]	[0x0000000301527000-0x00000003018a6fff], 0x0000000000380000 bytes flags: 0x0
 reserved[0xd]	[0x000000035bff8000-0x000000035bffffff], 0x0000000000008000 bytes flags: 0x0
REPLICATION: ON nasid 0, ktext from nasid 0, kdata from nasid 0
REPLICATION: ON nasid 1, ktext from nasid 0, kdata from nasid 0
REPLICATION: ON nasid 2, ktext from nasid 0, kdata from nasid 0
REPLICATION: ON nasid 3, ktext from nasid 0, kdata from nasid 0
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 8192kB 2-way, linesize 128 bytes.
Zone ranges:
  Normal   [mem 0x0000000000000000-0x000000035bffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000000000-0x0000000023ffffff]
  node   0: [mem 0x0000000028000000-0x000000002bffffff]
  node   0: [mem 0x0000000030000000-0x0000000033ffffff]
  node   0: [mem 0x0000000038000000-0x000000003bffffff]
  node   1: [mem 0x0000000100000000-0x0000000123ffffff]
  node   1: [mem 0x0000000128000000-0x000000012bffffff]
  node   1: [mem 0x0000000130000000-0x0000000133ffffff]
  node   1: [mem 0x0000000138000000-0x000000013bffffff]
  node   2: [mem 0x0000000200000000-0x0000000203ffffff]
  node   2: [mem 0x0000000208000000-0x000000020bffffff]
  node   2: [mem 0x0000000210000000-0x0000000213ffffff]
  node   2: [mem 0x0000000218000000-0x000000021bffffff]
  node   2: [mem 0x0000000220000000-0x0000000223ffffff]
  node   2: [mem 0x0000000228000000-0x000000022bffffff]
  node   2: [mem 0x0000000230000000-0x0000000233ffffff]
  node   2: [mem 0x0000000238000000-0x000000023bffffff]
  node   3: [mem 0x0000000300000000-0x0000000303ffffff]
  node   3: [mem 0x0000000308000000-0x000000030bffffff]
  node   3: [mem 0x0000000310000000-0x0000000313ffffff]
  node   3: [mem 0x0000000318000000-0x000000031bffffff]
  node   3: [mem 0x0000000320000000-0x0000000323ffffff]
  node   3: [mem 0x0000000328000000-0x000000032bffffff]
  node   3: [mem 0x0000000330000000-0x0000000333ffffff]
  node   3: [mem 0x0000000338000000-0x000000033bffffff]
  node   3: [mem 0x0000000340000000-0x0000000343ffffff]
  node   3: [mem 0x0000000348000000-0x000000034bffffff]
  node   3: [mem 0x0000000350000000-0x0000000353ffffff]
  node   3: [mem 0x0000000358000000-0x000000035bffffff]
mminit::pageflags_layout_widths Section 20 Node 6 Zone 1 Lastcpupid 0 Flags 22
mminit::pageflags_layout_shifts Section 20 Node 6 Zone 1 Lastcpupid 0
mminit::pageflags_layout_pgshifts Section 44 Node 38 Zone 37 Lastcpupid 0
mminit::pageflags_layout_nodezoneid Node/Zone ID: 44 -> 37
mminit::pageflags_layout_usage location: 64 -> 37 layout 37 -> 22 unused 22 -> 0 page-flags
Zeroed struct page in unavailable ranges: 442368 pages
Initmem setup node 0 [mem 0x0000000000000000-0x000000003bffffff]
On node 0 totalpages: 196608
  Normal zone: 2688 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 196608 pages, LIFO batch:63
mminit::memmap_init Initialising map node 0 zone 0 pfns 0 -> 245760
Initmem setup node 1 [mem 0x0000000100000000-0x000000013bffffff]
On node 1 totalpages: 196608
  Normal zone: 2688 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 196608 pages, LIFO batch:63
mminit::memmap_init Initialising map node 1 zone 0 pfns 1048576 -> 1294336
Initmem setup node 2 [mem 0x0000000200000000-0x000000023bffffff]
On node 2 totalpages: 131072
  Normal zone: 1792 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 131072 pages, LIFO batch:31
mminit::memmap_init Initialising map node 2 zone 0 pfns 2097152 -> 2342912
Initmem setup node 3 [mem 0x0000000300000000-0x000000035bffffff]
On node 3 totalpages: 196608
  Normal zone: 2688 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 196608 pages, LIFO batch:63
mminit::memmap_init Initialising map node 3 zone 0 pfns 3145728 -> 3522560
memblock_alloc_try_nid: 88 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 start_kernel+0x110/0x734
memblock_reserve: [0x0000000000791480-0x00000000007914d7] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 88 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 start_kernel+0x13c/0x734
memblock_reserve: [0x0000000000791500-0x0000000000791557] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 88 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 start_kernel+0x178/0x734
memblock_reserve: [0x0000000000791580-0x00000000007915d7] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_alloc_alloc_info+0x5c/0xc8
memblock_reserve: [0x0000000000792000-0x0000000000792fff] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 4096 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_embed_first_chunk+0x594/0x950
memblock_reserve: [0x0000000000793000-0x0000000000793fff] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 622592 bytes align=0x1000 nid=-1 from=0x0000000001000000 max_addr=0x0000000000000000 pcpu_embed_first_chunk+0x610/0x950
memblock_reserve: [0x0000000001b80000-0x0000000001c17fff] memblock_alloc_range_nid+0x158/0x1fc
   memblock_free: [0x0000000001b93000-0x0000000001b92fff] pcpu_embed_first_chunk+0x7e0/0x950
   memblock_free: [0x0000000001ba6000-0x0000000001ba5fff] pcpu_embed_first_chunk+0x7e0/0x950
   memblock_free: [0x0000000001bb9000-0x0000000001bb8fff] pcpu_embed_first_chunk+0x7e0/0x950
   memblock_free: [0x0000000001bcc000-0x0000000001bcbfff] pcpu_embed_first_chunk+0x7e0/0x950
   memblock_free: [0x0000000001bdf000-0x0000000001bdefff] pcpu_embed_first_chunk+0x7e0/0x950
   memblock_free: [0x0000000001bf2000-0x0000000001bf1fff] pcpu_embed_first_chunk+0x7e0/0x950
   memblock_free: [0x0000000001c05000-0x0000000001c04fff] pcpu_embed_first_chunk+0x7e0/0x950
   memblock_free: [0x0000000001c18000-0x0000000001c17fff] pcpu_embed_first_chunk+0x7e0/0x950
percpu: Embedded 19 pages/cpu s39584 r8192 d30048 u77824
memblock_alloc_try_nid: 8 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_setup_first_chunk+0x224/0x914
memblock_reserve: [0x0000000000791600-0x0000000000791607] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 8 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_setup_first_chunk+0x24c/0x914
memblock_reserve: [0x0000000000791680-0x0000000000791687] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 32 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_setup_first_chunk+0x274/0x914
memblock_reserve: [0x0000000000791700-0x000000000079171f] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 64 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_setup_first_chunk+0x29c/0x914
memblock_reserve: [0x0000000000791780-0x00000000007917bf] memblock_alloc_range_nid+0x158/0x1fc
pcpu-alloc: s39584 r8192 d30048 u77824 alloc=19*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
memblock_alloc_try_nid: 256 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_setup_first_chunk+0x76c/0x914
memblock_reserve: [0x0000000000791800-0x00000000007918ff] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 121 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_alloc_first_chunk+0x90/0x320
memblock_reserve: [0x0000000000791900-0x0000000000791978] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 384 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_alloc_first_chunk+0xe8/0x320
memblock_reserve: [0x0000000000791980-0x0000000000791aff] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 392 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_alloc_first_chunk+0x154/0x320
memblock_reserve: [0x0000000000791b00-0x0000000000791c87] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 96 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_alloc_first_chunk+0x17c/0x320
memblock_reserve: [0x0000000000791d00-0x0000000000791d5f] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 121 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_alloc_first_chunk+0x90/0x320
memblock_reserve: [0x0000000000791d80-0x0000000000791df8] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 1024 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_alloc_first_chunk+0xe8/0x320
memblock_reserve: [0x0000000000794000-0x00000000007943ff] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 1032 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_alloc_first_chunk+0x154/0x320
memblock_reserve: [0x0000000000794400-0x0000000000794807] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 256 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_alloc_first_chunk+0x17c/0x320
memblock_reserve: [0x0000000000791e00-0x0000000000791eff] memblock_alloc_range_nid+0x158/0x1fc
   memblock_free: [0x0000000000792000-0x0000000000792fff] pcpu_embed_first_chunk+0x870/0x950
   memblock_free: [0x0000000000793000-0x0000000000793fff] pcpu_embed_first_chunk+0x908/0x950
CPU 0 clock is 300MHz.
mminit::zonelist general 0:Normal = 0:Normal 1:Normal 2:Normal 3:Normal 
mminit::zonelist thisnode 0:Normal = 0:Normal 
mminit::zonelist general 1:Normal = 1:Normal 3:Normal 2:Normal 0:Normal 
mminit::zonelist thisnode 1:Normal = 1:Normal 
mminit::zonelist general 2:Normal = 2:Normal 3:Normal 1:Normal 0:Normal 
mminit::zonelist thisnode 2:Normal = 2:Normal 
mminit::zonelist general 3:Normal = 3:Normal 2:Normal 1:Normal 0:Normal 
mminit::zonelist thisnode 3:Normal = 3:Normal 
Built 4 zonelists, mobility grouping on.  Total pages: 711040
Policy zone: Normal
Kernel command line: root=dksc(0,1,0) ip=dhcp root=/dev/nfs mminit_loglevel=4 ignore_loglevel memblock=debug
printk: log_buf_len individual max cpu contribution: 4096 bytes
printk: log_buf_len total cpu_extra contributions: 28672 bytes
printk: log_buf_len min size: 32768 bytes
memblock_alloc_try_nid: 65536 bytes align=0x8 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 setup_log_buf+0x15c/0x2d0
memblock_reserve: [0x0000000000794808-0x00000000007a4807] memblock_alloc_range_nid+0x158/0x1fc
printk: log_buf_len: 65536 bytes
printk: early log buf free: 9680(29%)
memblock_reserve: [0x0000000000000000-0x00000000000003ff] trap_init+0x44/0x580
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 2803948K/2883584K available (5530K kernel code, 345K rwdata, 1196K rodata, 352K init, 186K bss, 79636K reserved, 0K cma-reserved)

bootlog with sparse_memory_present_with_active_regions per node:

Determined physical RAM map:
 memory: 00000000006ec000 @ 000000000001c000 (usable)
 memory: 0000000000058000 @ 0000000000708000 (usable after init)
 memory: 000000000002f000 @ 0000000000760000 (usable)
printk: debug: ignoring loglevel setting.
memblock_alloc_try_nid: 192 bytes align=0x80 nid=0 from=0x0000000000000000 max_addr=0x0000000000000000 sparse_init_nid+0xa0/0x4ac
memblock_reserve: [0x0000000000791000-0x00000000007910bf] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid_raw: 14680064 bytes align=0x1000 nid=0 from=0x0000000001000000 max_addr=0x0000000000000000 sparse_init_nid+0x154/0x4ac
memblock_reserve: [0x0000000001000000-0x0000000001dfffff] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 3670016 bytes align=0x1000 nid=0 from=0x0000000001000000 max_addr=0x0000000000000000 __populate_section_memmap+0x3c/0x98
memblock_reserve: [0x0000000001e00000-0x000000000217ffff] memblock_alloc_range_nid+0x158/0x1fc
   memblock_free: [0x0000000001b80000-0x0000000001dfffff] sparse_init_nid+0x360/0x4ac
memblock_alloc_try_nid: 192 bytes align=0x80 nid=0 from=0x0000000000000000 max_addr=0x0000000000000000 sparse_init_nid+0xa0/0x4ac
memblock_reserve: [0x0000000000791100-0x00000000007911bf] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid_raw: 14680064 bytes align=0x1000 nid=1 from=0x0000000001000000 max_addr=0x0000000000000000 sparse_init_nid+0x154/0x4ac
memblock_reserve: [0x0000000100027000-0x0000000100e26fff] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 3670016 bytes align=0x1000 nid=1 from=0x0000000001000000 max_addr=0x0000000000000000 __populate_section_memmap+0x3c/0x98
memblock_reserve: [0x0000000100e27000-0x00000001011a6fff] memblock_alloc_range_nid+0x158/0x1fc
   memblock_free: [0x0000000100c00000-0x0000000100e26fff] sparse_init_nid+0x360/0x4ac
memblock_alloc_try_nid: 192 bytes align=0x80 nid=0 from=0x0000000000000000 max_addr=0x0000000000000000 sparse_init_nid+0xa0/0x4ac
memblock_reserve: [0x0000000000791200-0x00000000007912bf] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid_raw: 14680064 bytes align=0x1000 nid=2 from=0x0000000001000000 max_addr=0x0000000000000000 sparse_init_nid+0x154/0x4ac
memblock_reserve: [0x0000000200027000-0x0000000200e26fff] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 3670016 bytes align=0x1000 nid=2 from=0x0000000001000000 max_addr=0x0000000000000000 __populate_section_memmap+0x3c/0x98
memblock_reserve: [0x0000000200e27000-0x00000002011a6fff] memblock_alloc_range_nid+0x158/0x1fc
   memblock_free: [0x0000000200c00000-0x0000000200e26fff] sparse_init_nid+0x360/0x4ac
memblock_alloc_try_nid: 288 bytes align=0x80 nid=0 from=0x0000000000000000 max_addr=0x0000000000000000 sparse_init_nid+0xa0/0x4ac
memblock_reserve: [0x0000000000791300-0x000000000079141f] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid_raw: 22020096 bytes align=0x1000 nid=3 from=0x0000000001000000 max_addr=0x0000000000000000 sparse_init_nid+0x154/0x4ac
memblock_reserve: [0x0000000300027000-0x0000000301526fff] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 3670016 bytes align=0x1000 nid=3 from=0x0000000001000000 max_addr=0x0000000000000000 __populate_section_memmap+0x3c/0x98
memblock_reserve: [0x0000000301527000-0x00000003018a6fff] memblock_alloc_range_nid+0x158/0x1fc
   memblock_free: [0x0000000301400000-0x0000000301526fff] sparse_init_nid+0x360/0x4ac
memblock_reserve: [0x00000000006b8000-0x00000000006b7fff] setup_arch+0x44c/0x58c
MEMBLOCK configuration:
 memory size = 0x00000000b0000000 reserved size = 0x0000000004d12360
 memory.cnt  = 0x1c
 memory[0x0]	[0x0000000000000000-0x0000000023ffffff], 0x0000000024000000 bytes on node 0 flags: 0x0
 memory[0x1]	[0x0000000028000000-0x000000002bffffff], 0x0000000004000000 bytes on node 0 flags: 0x0
 memory[0x2]	[0x0000000030000000-0x0000000033ffffff], 0x0000000004000000 bytes on node 0 flags: 0x0
 memory[0x3]	[0x0000000038000000-0x000000003bffffff], 0x0000000004000000 bytes on node 0 flags: 0x0
 memory[0x4]	[0x0000000100000000-0x0000000123ffffff], 0x0000000024000000 bytes on node 1 flags: 0x0
 memory[0x5]	[0x0000000128000000-0x000000012bffffff], 0x0000000004000000 bytes on node 1 flags: 0x0
 memory[0x6]	[0x0000000130000000-0x0000000133ffffff], 0x0000000004000000 bytes on node 1 flags: 0x0
 memory[0x7]	[0x0000000138000000-0x000000013bffffff], 0x0000000004000000 bytes on node 1 flags: 0x0
 memory[0x8]	[0x0000000200000000-0x0000000203ffffff], 0x0000000004000000 bytes on node 2 flags: 0x0
 memory[0x9]	[0x0000000208000000-0x000000020bffffff], 0x0000000004000000 bytes on node 2 flags: 0x0
 memory[0xa]	[0x0000000210000000-0x0000000213ffffff], 0x0000000004000000 bytes on node 2 flags: 0x0
 memory[0xb]	[0x0000000218000000-0x000000021bffffff], 0x0000000004000000 bytes on node 2 flags: 0x0
 memory[0xc]	[0x0000000220000000-0x0000000223ffffff], 0x0000000004000000 bytes on node 2 flags: 0x0
 memory[0xd]	[0x0000000228000000-0x000000022bffffff], 0x0000000004000000 bytes on node 2 flags: 0x0
 memory[0xe]	[0x0000000230000000-0x0000000233ffffff], 0x0000000004000000 bytes on node 2 flags: 0x0
 memory[0xf]	[0x0000000238000000-0x000000023bffffff], 0x0000000004000000 bytes on node 2 flags: 0x0
 memory[0x10]	[0x0000000300000000-0x0000000303ffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x11]	[0x0000000308000000-0x000000030bffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x12]	[0x0000000310000000-0x0000000313ffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x13]	[0x0000000318000000-0x000000031bffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x14]	[0x0000000320000000-0x0000000323ffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x15]	[0x0000000328000000-0x000000032bffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x16]	[0x0000000330000000-0x0000000333ffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x17]	[0x0000000338000000-0x000000033bffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x18]	[0x0000000340000000-0x0000000343ffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x19]	[0x0000000348000000-0x000000034bffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x1a]	[0x0000000350000000-0x0000000353ffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 memory[0x1b]	[0x0000000358000000-0x000000035bffffff], 0x0000000004000000 bytes on node 3 flags: 0x0
 reserved.cnt  = 0xd
 reserved[0x0]	[0x0000000000000000-0x00000000007910bf], 0x00000000007910c0 bytes flags: 0x0
 reserved[0x1]	[0x0000000000791100-0x00000000007911bf], 0x00000000000000c0 bytes flags: 0x0
 reserved[0x2]	[0x0000000000791200-0x00000000007912bf], 0x00000000000000c0 bytes flags: 0x0
 reserved[0x3]	[0x0000000000791300-0x000000000079141f], 0x0000000000000120 bytes flags: 0x0
 reserved[0x4]	[0x0000000001000000-0x0000000001b7ffff], 0x0000000000b80000 bytes flags: 0x0
 reserved[0x5]	[0x0000000001e00000-0x000000000217ffff], 0x0000000000380000 bytes flags: 0x0
 reserved[0x6]	[0x000000003bfff000-0x000000003bffffff], 0x0000000000001000 bytes flags: 0x0
 reserved[0x7]	[0x0000000100000000-0x0000000100bfffff], 0x0000000000c00000 bytes flags: 0x0
 reserved[0x8]	[0x0000000100e27000-0x00000001011a6fff], 0x0000000000380000 bytes flags: 0x0
 reserved[0x9]	[0x0000000200000000-0x0000000200bfffff], 0x0000000000c00000 bytes flags: 0x0
 reserved[0xa]	[0x0000000200e27000-0x00000002011a6fff], 0x0000000000380000 bytes flags: 0x0
 reserved[0xb]	[0x0000000300000000-0x00000003013fffff], 0x0000000001400000 bytes flags: 0x0
 reserved[0xc]	[0x0000000301527000-0x00000003018a6fff], 0x0000000000380000 bytes flags: 0x0
REPLICATION: ON nasid 0, ktext from nasid 0, kdata from nasid 0
REPLICATION: ON nasid 1, ktext from nasid 0, kdata from nasid 0
REPLICATION: ON nasid 2, ktext from nasid 0, kdata from nasid 0
REPLICATION: ON nasid 3, ktext from nasid 0, kdata from nasid 0
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 8192kB 2-way, linesize 128 bytes.
Zone ranges:
  Normal   [mem 0x0000000000000000-0x000000035bffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000000000-0x0000000023ffffff]
  node   0: [mem 0x0000000028000000-0x000000002bffffff]
  node   0: [mem 0x0000000030000000-0x0000000033ffffff]
  node   0: [mem 0x0000000038000000-0x000000003bffffff]
  node   1: [mem 0x0000000100000000-0x0000000123ffffff]
  node   1: [mem 0x0000000128000000-0x000000012bffffff]
  node   1: [mem 0x0000000130000000-0x0000000133ffffff]
  node   1: [mem 0x0000000138000000-0x000000013bffffff]
  node   2: [mem 0x0000000200000000-0x0000000203ffffff]
  node   2: [mem 0x0000000208000000-0x000000020bffffff]
  node   2: [mem 0x0000000210000000-0x0000000213ffffff]
  node   2: [mem 0x0000000218000000-0x000000021bffffff]
  node   2: [mem 0x0000000220000000-0x0000000223ffffff]
  node   2: [mem 0x0000000228000000-0x000000022bffffff]
  node   2: [mem 0x0000000230000000-0x0000000233ffffff]
  node   2: [mem 0x0000000238000000-0x000000023bffffff]
  node   3: [mem 0x0000000300000000-0x0000000303ffffff]
  node   3: [mem 0x0000000308000000-0x000000030bffffff]
  node   3: [mem 0x0000000310000000-0x0000000313ffffff]
  node   3: [mem 0x0000000318000000-0x000000031bffffff]
  node   3: [mem 0x0000000320000000-0x0000000323ffffff]
  node   3: [mem 0x0000000328000000-0x000000032bffffff]
  node   3: [mem 0x0000000330000000-0x0000000333ffffff]
  node   3: [mem 0x0000000338000000-0x000000033bffffff]
  node   3: [mem 0x0000000340000000-0x0000000343ffffff]
  node   3: [mem 0x0000000348000000-0x000000034bffffff]
  node   3: [mem 0x0000000350000000-0x0000000353ffffff]
  node   3: [mem 0x0000000358000000-0x000000035bffffff]
mminit::pageflags_layout_widths Section 20 Node 6 Zone 1 Lastcpupid 0 Flags 22
mminit::pageflags_layout_shifts Section 20 Node 6 Zone 1 Lastcpupid 0
mminit::pageflags_layout_pgshifts Section 44 Node 38 Zone 37 Lastcpupid 0
mminit::pageflags_layout_nodezoneid Node/Zone ID: 44 -> 37
mminit::pageflags_layout_usage location: 64 -> 37 layout 37 -> 22 unused 22 -> 0 page-flags
Zeroed struct page in unavailable ranges: 442368 pages
Initmem setup node 0 [mem 0x0000000000000000-0x000000003bffffff]
On node 0 totalpages: 196608
  Normal zone: 2688 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 196608 pages, LIFO batch:63
mminit::memmap_init Initialising map node 0 zone 0 pfns 0 -> 245760
Initmem setup node 1 [mem 0x0000000100000000-0x000000013bffffff]
On node 1 totalpages: 196608
  Normal zone: 2688 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 196608 pages, LIFO batch:63
mminit::memmap_init Initialising map node 1 zone 0 pfns 1048576 -> 1294336
Initmem setup node 2 [mem 0x0000000200000000-0x000000023bffffff]
On node 2 totalpages: 131072
  Normal zone: 1792 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 131072 pages, LIFO batch:31
mminit::memmap_init Initialising map node 2 zone 0 pfns 2097152 -> 2342912
Initmem setup node 3 [mem 0x0000000300000000-0x000000035bffffff]
On node 3 totalpages: 196608
  Normal zone: 2688 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 196608 pages, LIFO batch:63
mminit::memmap_init Initialising map node 3 zone 0 pfns 3145728 -> 3522560
memblock_alloc_try_nid: 88 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 start_kernel+0x110/0x734
memblock_reserve: [0x0000000000791480-0x00000000007914d7] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 88 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 start_kernel+0x13c/0x734
memblock_reserve: [0x0000000000791500-0x0000000000791557] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 88 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 start_kernel+0x178/0x734
memblock_reserve: [0x0000000000791580-0x00000000007915d7] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_alloc_alloc_info+0x5c/0xc8
memblock_reserve: [0x0000000000792000-0x0000000000792fff] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 4096 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_embed_first_chunk+0x594/0x950
memblock_reserve: [0x0000000000793000-0x0000000000793fff] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 622592 bytes align=0x1000 nid=-1 from=0x0000000001000000 max_addr=0x0000000000000000 pcpu_embed_first_chunk+0x610/0x950
memblock_reserve: [0x0000000001b80000-0x0000000001c17fff] memblock_alloc_range_nid+0x158/0x1fc
   memblock_free: [0x0000000001b93000-0x0000000001b92fff] pcpu_embed_first_chunk+0x7e0/0x950
   memblock_free: [0x0000000001ba6000-0x0000000001ba5fff] pcpu_embed_first_chunk+0x7e0/0x950
   memblock_free: [0x0000000001bb9000-0x0000000001bb8fff] pcpu_embed_first_chunk+0x7e0/0x950
   memblock_free: [0x0000000001bcc000-0x0000000001bcbfff] pcpu_embed_first_chunk+0x7e0/0x950
   memblock_free: [0x0000000001bdf000-0x0000000001bdefff] pcpu_embed_first_chunk+0x7e0/0x950
   memblock_free: [0x0000000001bf2000-0x0000000001bf1fff] pcpu_embed_first_chunk+0x7e0/0x950
   memblock_free: [0x0000000001c05000-0x0000000001c04fff] pcpu_embed_first_chunk+0x7e0/0x950
   memblock_free: [0x0000000001c18000-0x0000000001c17fff] pcpu_embed_first_chunk+0x7e0/0x950
percpu: Embedded 19 pages/cpu s39584 r8192 d30048 u77824
memblock_alloc_try_nid: 8 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_setup_first_chunk+0x224/0x914
memblock_reserve: [0x0000000000791600-0x0000000000791607] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 8 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_setup_first_chunk+0x24c/0x914
memblock_reserve: [0x0000000000791680-0x0000000000791687] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 32 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_setup_first_chunk+0x274/0x914
memblock_reserve: [0x0000000000791700-0x000000000079171f] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 64 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_setup_first_chunk+0x29c/0x914
memblock_reserve: [0x0000000000791780-0x00000000007917bf] memblock_alloc_range_nid+0x158/0x1fc
pcpu-alloc: s39584 r8192 d30048 u77824 alloc=19*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
memblock_alloc_try_nid: 256 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_setup_first_chunk+0x76c/0x914
memblock_reserve: [0x0000000000791800-0x00000000007918ff] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 121 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_alloc_first_chunk+0x90/0x320
memblock_reserve: [0x0000000000791900-0x0000000000791978] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 384 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_alloc_first_chunk+0xe8/0x320
memblock_reserve: [0x0000000000791980-0x0000000000791aff] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 392 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_alloc_first_chunk+0x154/0x320
memblock_reserve: [0x0000000000791b00-0x0000000000791c87] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 96 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_alloc_first_chunk+0x17c/0x320
memblock_reserve: [0x0000000000791d00-0x0000000000791d5f] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 121 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_alloc_first_chunk+0x90/0x320
memblock_reserve: [0x0000000000791d80-0x0000000000791df8] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 1024 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_alloc_first_chunk+0xe8/0x320
memblock_reserve: [0x0000000000794000-0x00000000007943ff] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 1032 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_alloc_first_chunk+0x154/0x320
memblock_reserve: [0x0000000000794400-0x0000000000794807] memblock_alloc_range_nid+0x158/0x1fc
memblock_alloc_try_nid: 256 bytes align=0x80 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 pcpu_alloc_first_chunk+0x17c/0x320
memblock_reserve: [0x0000000000791e00-0x0000000000791eff] memblock_alloc_range_nid+0x158/0x1fc
   memblock_free: [0x0000000000792000-0x0000000000792fff] pcpu_embed_first_chunk+0x870/0x950
   memblock_free: [0x0000000000793000-0x0000000000793fff] pcpu_embed_first_chunk+0x908/0x950
CPU 0 clock is 300MHz.
mminit::zonelist general 0:Normal = 0:Normal 1:Normal 2:Normal 3:Normal 
mminit::zonelist thisnode 0:Normal = 0:Normal 
mminit::zonelist general 1:Normal = 1:Normal 3:Normal 2:Normal 0:Normal 
mminit::zonelist thisnode 1:Normal = 1:Normal 
mminit::zonelist general 2:Normal = 2:Normal 3:Normal 1:Normal 0:Normal 
mminit::zonelist thisnode 2:Normal = 2:Normal 
mminit::zonelist general 3:Normal = 3:Normal 2:Normal 1:Normal 0:Normal 
mminit::zonelist thisnode 3:Normal = 3:Normal 
Built 4 zonelists, mobility grouping on.  Total pages: 711040
Policy zone: Normal
Kernel command line: root=dksc(0,1,0) ip=dhcp root=/dev/nfs mminit_loglevel=4 ignore_loglevel memblock=debug
printk: log_buf_len individual max cpu contribution: 4096 bytes
printk: log_buf_len total cpu_extra contributions: 28672 bytes
printk: log_buf_len min size: 32768 bytes
memblock_alloc_try_nid: 65536 bytes align=0x8 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 setup_log_buf+0x15c/0x2d0
memblock_reserve: [0x0000000000794808-0x00000000007a4807] memblock_alloc_range_nid+0x158/0x1fc
printk: log_buf_len: 65536 bytes
printk: early log buf free: 9792(29%)
memblock_reserve: [0x0000000000000000-0x00000000000003ff] trap_init+0x44/0x580
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 2803980K/2883584K available (5530K kernel code, 345K rwdata, 1196K rodata, 352K init, 186K bss, 79604K reserved, 0K cma-reserved)

-- 
SUSE Software Solutions Germany GmbH
HRB 247165 (AG München)
Geschäftsführer: Felix Imendörffer

Re: [PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Thomas Bogendoerfer]

On Thu, Sep 12, 2019 at 03:55:39PM +0200, Thomas Bogendoerfer wrote:
> - reserved[0xd]	[0x000000035bff8000-0x000000035bffffff], 0x0000000000008000 bytes flags: 0x0
> 
> I have no idea which reservation this is, but it's not from one of the
> node data.

that's sparsemem's mem_section. And 

 free_bootmem_with_active_regions(node, end_pfn);

on the last node will free this reserved memory, when memory
is added node by node. This explains it.

So when resending the patch add my

Tested-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]

Re: [PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Mike Rapoport]

On September 12, 2019 3:09:12 PM GMT+01:00, Thomas Bogendoerfer <tsbogend@alpha.franken.de> wrote:
>On Thu, Sep 12, 2019 at 03:55:39PM +0200, Thomas Bogendoerfer wrote:
>> - reserved[0xd]	[0x000000035bff8000-0x000000035bffffff],
>0x0000000000008000 bytes flags: 0x0
>> 
>> I have no idea which reservation this is, but it's not from one of
>the
>> node data.
>
>that's sparsemem's mem_section. And 
>
> free_bootmem_with_active_regions(node, end_pfn);
>
>on the last node will free this reserved memory, when memory
>is added node by node. This explains it.
>
>So when resending the patch add my
>
>Tested-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>

I was thinking about co-developed, can add both :)

>Thomas.


-- 
Sincerely yours,
Mike

Re: [PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Mike Rapoport]

Hi Thomas,

On Thu, Sep 12, 2019 at 04:09:12PM +0200, Thomas Bogendoerfer wrote:
> On Thu, Sep 12, 2019 at 03:55:39PM +0200, Thomas Bogendoerfer wrote:
> > - reserved[0xd]	[0x000000035bff8000-0x000000035bffffff], 0x0000000000008000 bytes flags: 0x0
> > 
> > I have no idea which reservation this is, but it's not from one of the
> > node data.
> 
> that's sparsemem's mem_section. And 
> 
>  free_bootmem_with_active_regions(node, end_pfn);

It seems that the call to free_bootmem_with_active_regions() should have
been removed along with bootmem and it's not needed now.

Can you please test the below version of the patch?

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d50fafd..e4b02b5 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -669,6 +669,7 @@ config SGI_IP22
 config SGI_IP27
 	bool "SGI IP27 (Origin200/2000)"
 	select ARCH_HAS_PHYS_TO_DMA
+	select ARCH_SPARSEMEM_ENABLE
 	select FW_ARC
 	select FW_ARC64
 	select BOOT_ELF64
@@ -2633,18 +2634,9 @@ config ARCH_FLATMEM_ENABLE
 	def_bool y
 	depends on !NUMA && !CPU_LOONGSON2
 
-config ARCH_DISCONTIGMEM_ENABLE
-	bool
-	default y if SGI_IP27
-	help
-	  Say Y to support efficient handling of discontiguous physical memory,
-	  for architectures which are either NUMA (Non-Uniform Memory Access)
-	  or have huge holes in the physical address space for other reasons.
-	  See <file:Documentation/vm/numa.rst> for more.
-
 config ARCH_SPARSEMEM_ENABLE
 	bool
-	select SPARSEMEM_STATIC
+	select SPARSEMEM_STATIC if !SGI_IP27
 
 config NUMA
 	bool "NUMA Support"
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index fb077a9..9db8692 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -406,12 +406,8 @@ static void __init node_mem_init(cnodeid_t node)
 	slot_freepfn += PFN_UP(sizeof(struct pglist_data) +
 			       sizeof(struct hub_data));
 
-	free_bootmem_with_active_regions(node, end_pfn);
-
 	memblock_reserve(slot_firstpfn << PAGE_SHIFT,
 			 ((slot_freepfn - slot_firstpfn) << PAGE_SHIFT));
-
-	sparse_memory_present_with_active_regions(node);
 }
 
 /*
@@ -444,6 +440,8 @@ void __init prom_meminit(void)
 		}
 		__node_data[node] = &null_node;
 	}
+
+	memblocks_present();
 }
 
 void __init prom_free_prom_memory(void)
 
> on the last node will free this reserved memory, when memory
> is added node by node. This explains it.
> 
> So when resending the patch add my
> 
> Tested-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
> 
> Thomas.
> 
> -- 
> Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
> good idea.                                                [ RFC1925, 2.3 ]

-- 
Sincerely yours,
Mike.

Re: [PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Thomas Bogendoerfer]

On Sat, Sep 14, 2019 at 11:41:13AM +0100, Mike Rapoport wrote:
> On Thu, Sep 12, 2019 at 04:09:12PM +0200, Thomas Bogendoerfer wrote:
> > On Thu, Sep 12, 2019 at 03:55:39PM +0200, Thomas Bogendoerfer wrote:
> > > - reserved[0xd]	[0x000000035bff8000-0x000000035bffffff], 0x0000000000008000 bytes flags: 0x0
> > > 
> > > I have no idea which reservation this is, but it's not from one of the
> > > node data.
> > 
> > that's sparsemem's mem_section. And 
> > 
> >  free_bootmem_with_active_regions(node, end_pfn);
> 
> It seems that the call to free_bootmem_with_active_regions() should have
> been removed along with bootmem and it's not needed now.
> 
> Can you please test the below version of the patch?

Patch is good. I've compared bootlogs and output is the same
regarding memblock/memory debug messages.

When this is merged, I'll have a look into using memblock_alloc
for the node memory.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]

Re: [PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Mike Rapoport]

On Mon, Sep 16, 2019 at 11:07:05AM +0200, Thomas Bogendoerfer wrote:
> On Sat, Sep 14, 2019 at 11:41:13AM +0100, Mike Rapoport wrote:
> > On Thu, Sep 12, 2019 at 04:09:12PM +0200, Thomas Bogendoerfer wrote:
> > > On Thu, Sep 12, 2019 at 03:55:39PM +0200, Thomas Bogendoerfer wrote:
> > > > - reserved[0xd]	[0x000000035bff8000-0x000000035bffffff], 0x0000000000008000 bytes flags: 0x0
> > > > 
> > > > I have no idea which reservation this is, but it's not from one of the
> > > > node data.
> > > 
> > > that's sparsemem's mem_section. And 
> > > 
> > >  free_bootmem_with_active_regions(node, end_pfn);
> > 
> > It seems that the call to free_bootmem_with_active_regions() should have
> > been removed along with bootmem and it's not needed now.
> > 
> > Can you please test the below version of the patch?
> 
> Patch is good. I've compared bootlogs and output is the same
> regarding memblock/memory debug messages.

Can I add your co-developed+signed-off then?
 
> When this is merged, I'll have a look into using memblock_alloc
> for the node memory.
> 
> Thomas.
> 
> -- 
> Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
> good idea.                                                [ RFC1925, 2.3 ]

-- 
Sincerely yours,
Mike.

Re: [PATCH] mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM

[Thomas Bogendoerfer]

On Mon, Sep 16, 2019 at 12:52:35PM +0300, Mike Rapoport wrote:
> On Mon, Sep 16, 2019 at 11:07:05AM +0200, Thomas Bogendoerfer wrote:
> > Patch is good. I've compared bootlogs and output is the same
> > regarding memblock/memory debug messages.
> 
> Can I add your co-developed+signed-off then?

yes :-)

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]