LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Katsuhiro Suzuki <katsuhiro@katsuster.net>
To: Mark Brown <broonie@kernel.org>,
	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
	Katsuhiro Suzuki <katsuhiro@katsuster.net>
Subject: [PATCH] SoC: simple-card-utils: set 0Hz to sysclk when shutdown
Date: Sun,  8 Sep 2019 02:45:01 +0900
Message-ID: <20190907174501.19833-1-katsuhiro@katsuster.net> (raw)

This patch set 0Hz to sysclk when shutdown the card.

Some codecs set rate constraints that derives from sysclk. This
mechanism works correctly if machine drivers give fixed frequency.

But simple-audio and audio-graph card set variable clock rate if
'mclk-fs' property exists. In this case, rate constraints will go
bad scenario. For example a codec accepts three limited rates
(mclk / 256, mclk / 384, mclk / 512).

Bad scenario as follows (mclk-fs = 256):
   - Initialize sysclk by correct value (Ex. 12.288MHz)
     - Codec set constraints of PCM rate by sysclk
       48kHz (1/256), 32kHz (1/384), 24kHz (1/512)
   - Play 48kHz sound, it's acceptable
   - Sysclk is not changed

   - Play 32kHz sound, it's acceptable
   - Set sysclk to 8.192MHz (= fs * mclk-fs = 32k * 256)
     - Codec set constraints of PCM rate by sysclk
       32kHz (1/256), 21.33kHz (1/384), 16kHz (1/512)

   - Play 48kHz again, but it's NOT acceptable because constraints
     do not allow 48kHz

So codecs treat 0Hz sysclk as signal of applying no constraints to
avoid this problem.

Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
---
 sound/soc/generic/simple-card-utils.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c
index 556b1a789629..9b794775df53 100644
--- a/sound/soc/generic/simple-card-utils.c
+++ b/sound/soc/generic/simple-card-utils.c
@@ -213,10 +213,17 @@ EXPORT_SYMBOL_GPL(asoc_simple_startup);
 void asoc_simple_shutdown(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
 	struct asoc_simple_priv *priv = snd_soc_card_get_drvdata(rtd->card);
 	struct simple_dai_props *dai_props =
 		simple_priv_to_props(priv, rtd->num);
 
+	if (dai_props->mclk_fs) {
+		snd_soc_dai_set_sysclk(codec_dai, 0, 0, SND_SOC_CLOCK_IN);
+		snd_soc_dai_set_sysclk(cpu_dai, 0, 0, SND_SOC_CLOCK_OUT);
+	}
+
 	asoc_simple_clk_disable(dai_props->cpu_dai);
 
 	asoc_simple_clk_disable(dai_props->codec_dai);
-- 
2.23.0.rc1


             reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-07 17:45 Katsuhiro Suzuki [this message]
2019-09-09  0:31 ` Kuninori Morimoto
2019-09-09  2:49   ` Katsuhiro Suzuki
2019-09-09  3:54     ` Kuninori Morimoto
2019-09-09 10:07 ` Applied "SoC: simple-card-utils: set 0Hz to sysclk when shutdown" to the asoc tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190907174501.19833-1-katsuhiro@katsuster.net \
    --to=katsuhiro@katsuster.net \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=kuninori.morimoto.gx@renesas.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git
	git clone --mirror https://lore.kernel.org/lkml/10 lkml/git/10.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git