linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Murray <andrew.murray@arm.com>
To: Pankaj Dubey <pankaj.dubey@samsung.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	jingoohan1@gmail.com, gustavo.pimentel@synopsys.com,
	lorenzo.pieralisi@arm.com, bhelgaas@google.com,
	Anvesh Salveru <anvesh.s@samsung.com>
Subject: Re: [PATCH 1/2] PCI: dwc: Add support to disable GEN3 equalization
Date: Tue, 10 Sep 2019 14:58:13 +0100	[thread overview]
Message-ID: <20190910135813.GK9720@e119886-lin.cambridge.arm.com> (raw)
In-Reply-To: <1568118302-10505-1-git-send-email-pankaj.dubey@samsung.com>

On Tue, Sep 10, 2019 at 05:55:01PM +0530, Pankaj Dubey wrote:
> From: Anvesh Salveru <anvesh.s@samsung.com>
> 
> In some platforms, PCIe PHY may have issues which will prevent linkup
> to happen in GEN3 or high speed. In case equalization fails, link will
> fallback to GEN1.

When you refer to "high speed", do you mean "higher speeds" as in GEN3,
GEN4, etc?

> 
> Designware controller has support for disabling GEN3 equalization if
> required. This patch enables the designware driver to disable the PCIe
> GEN3 equalization by writing into PCIE_PORT_GEN3_RELATED.

Thus limiting to GEN2 speeds max, right?

Is the purpose of PORT_LOGIC_GEN3_EQ_DISABLE to disable GEN3 and above
even though we advertise GEN3 and above speeds? I.e. the IP advertises
GEN3 but the phy can't handle it, we can't change what the IP advertises
and so we disable equalization to limit to GEN2?

I notice many of the other dwc drivers (dra7xx, keystone, tegra194, imx6)
seem to use the device tree to specify a max-link-speed and then impose
that limit by changing the value in PCI_EXP_LNKCAP. Is your
PORT_LOGIC_GEN3_EQ_DISABLE approach and alternative to the PCI_EXP_LNKCAP
approach, or does your approach add something else?

> 
> Platform drivers can disable equalization by setting the dwc_pci_quirk
> flag DWC_EQUALIZATION_DISABLE.
> 
> Signed-off-by: Anvesh Salveru <anvesh.s@samsung.com>
> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> ---
>  drivers/pci/controller/dwc/pcie-designware.c | 7 +++++++
>  drivers/pci/controller/dwc/pcie-designware.h | 7 +++++++
>  2 files changed, 14 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index 7d25102..bf82091 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -466,4 +466,11 @@ void dw_pcie_setup(struct dw_pcie *pci)
>  		break;
>  	}
>  	dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
> +
> +	val = dw_pcie_readl_dbi(pci, PCIE_PORT_GEN3_RELATED);
> +
> +	if (pci->dwc_pci_quirk & DWC_EQUALIZATION_DISABLE)
> +		val |= PORT_LOGIC_GEN3_EQ_DISABLE;
> +
> +	dw_pcie_writel_dbi(pci, PCIE_PORT_GEN3_RELATED, val);

The problem here is that even when DWC_EQUALIZATION_DISABLE is not set
the driver will read and write PCIE_PORT_GEN3_RELATED when it is not
needed. How about something like:

> +
> +	if (pci->dwc_pci_quirk & DWC_EQUALIZATION_DISABLE) {
> +	        val = dw_pcie_readl_dbi(pci, PCIE_PORT_GEN3_RELATED);
> +		val |= PORT_LOGIC_GEN3_EQ_DISABLE;
> +	        dw_pcie_writel_dbi(pci, PCIE_PORT_GEN3_RELATED, val);
> +     }

>  }
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index ffed084..a1453c5 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -29,6 +29,9 @@
>  #define LINK_WAIT_MAX_IATU_RETRIES	5
>  #define LINK_WAIT_IATU			9
>  
> +/* Parameters for PCIe Quirks */
> +#define DWC_EQUALIZATION_DISABLE	0x1

How about using BIT(1) instead? Thus implying that you can combine
quirks.

Thanks,

Andrew Murray

> +
>  /* Synopsys-specific PCIe configuration registers */
>  #define PCIE_PORT_LINK_CONTROL		0x710
>  #define PORT_LINK_MODE_MASK		GENMASK(21, 16)
> @@ -60,6 +63,9 @@
>  #define PCIE_MSI_INTR0_MASK		0x82C
>  #define PCIE_MSI_INTR0_STATUS		0x830
>  
> +#define PCIE_PORT_GEN3_RELATED		0x890
> +#define PORT_LOGIC_GEN3_EQ_DISABLE	BIT(16)
> +
>  #define PCIE_ATU_VIEWPORT		0x900
>  #define PCIE_ATU_REGION_INBOUND		BIT(31)
>  #define PCIE_ATU_REGION_OUTBOUND	0
> @@ -244,6 +250,7 @@ struct dw_pcie {
>  	struct dw_pcie_ep	ep;
>  	const struct dw_pcie_ops *ops;
>  	unsigned int		version;
> +	unsigned int		dwc_pci_quirk;
>  };
>  
>  #define to_dw_pcie_from_pp(port) container_of((port), struct dw_pcie, pp)
> -- 
> 2.7.4
> 

  parent reply	other threads:[~2019-09-10 13:58 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20190910122514epcas5p4f00c0f999333dd7707c0a353fd06b57f@epcas5p4.samsung.com>
2019-09-10 12:25 ` Pankaj Dubey
     [not found]   ` <CGME20190910122520epcas5p1faeb16f7c38ee057ce93783a637e6bf4@epcas5p1.samsung.com>
2019-09-10 12:25     ` [PATCH 2/2] PCI: dwc: Add support to disable equalization phase 2 and 3 Pankaj Dubey
2019-09-10 14:05       ` Andrew Murray
2019-09-10 16:21         ` Pankaj Dubey
2019-09-11  9:27           ` Andrew Murray
2019-09-12 11:44             ` Pankaj Dubey
2019-09-10 13:58   ` Andrew Murray [this message]
2019-09-10 16:16     ` [PATCH 1/2] PCI: dwc: Add support to disable GEN3 equalization Pankaj Dubey
2019-09-11  9:23       ` Andrew Murray
2019-09-12 11:39         ` Pankaj Dubey
2019-09-12 12:42           ` Andrew Murray
2019-09-12 14:21   ` Gustavo Pimentel
2019-09-13 10:53     ` Pankaj Dubey

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190910135813.GK9720@e119886-lin.cambridge.arm.com \
    --to=andrew.murray@arm.com \
    --cc=anvesh.s@samsung.com \
    --cc=bhelgaas@google.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=pankaj.dubey@samsung.com \
    --subject='Re: [PATCH 1/2] PCI: dwc: Add support to disable GEN3 equalization' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).