From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: tglx@linutronix.de, jason@lakedaemon.net, maz@kernel.org,
robh+dt@kernel.org, mark.rutland@arm.com,
nicolas.ferre@microchip.com, ludovic.desroches@microchip.com,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Sandeep Sheriker Mallikarjun
<sandeepsheriker.mallikarjun@microchip.com>
Subject: Re: [PATCH] irqchip/atmel-aic5: add support for sam9x60 irqchip
Date: Tue, 10 Sep 2019 17:15:13 +0200 [thread overview]
Message-ID: <20190910151513.GY21254@piout.net> (raw)
In-Reply-To: <1568026835-6646-1-git-send-email-claudiu.beznea@microchip.com>
On 09/09/2019 14:00:35+0300, Claudiu Beznea wrote:
> From: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
>
> Add support for SAM9X60 irqchip.
>
> Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
> [claudiu.beznea@microchip.com: update aic5_irq_fixups[], update
> documentation]
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> ---
> .../devicetree/bindings/interrupt-controller/atmel,aic.txt | 7 +++++--
> drivers/irqchip/irq-atmel-aic5.c | 10 ++++++++++
> 2 files changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
> index f4c5d34c4111..7079d44bf3ba 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
> +++ b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
> @@ -1,8 +1,11 @@
> * Advanced Interrupt Controller (AIC)
>
> Required properties:
> -- compatible: Should be "atmel,<chip>-aic"
> - <chip> can be "at91rm9200", "sama5d2", "sama5d3" or "sama5d4"
> +- compatible: Should be:
> + - "atmel,<chip>-aic" where <chip> can be "at91rm9200", "sama5d2",
> + "sama5d3" or "sama5d4"
> + - "microchip,<chip>-aic" where <chip> can be "sam9x60"
> +
> - interrupt-controller: Identifies the node as an interrupt controller.
> - #interrupt-cells: The number of cells to define the interrupts. It should be 3.
> The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
> diff --git a/drivers/irqchip/irq-atmel-aic5.c b/drivers/irqchip/irq-atmel-aic5.c
> index 6acad2ea0fb3..29333497ba10 100644
> --- a/drivers/irqchip/irq-atmel-aic5.c
> +++ b/drivers/irqchip/irq-atmel-aic5.c
> @@ -313,6 +313,7 @@ static void __init sama5d3_aic_irq_fixup(void)
> static const struct of_device_id aic5_irq_fixups[] __initconst = {
> { .compatible = "atmel,sama5d3", .data = sama5d3_aic_irq_fixup },
> { .compatible = "atmel,sama5d4", .data = sama5d3_aic_irq_fixup },
> + { .compatible = "microchip,sam9x60", .data = sama5d3_aic_irq_fixup },
> { /* sentinel */ },
> };
>
> @@ -390,3 +391,12 @@ static int __init sama5d4_aic5_of_init(struct device_node *node,
> return aic5_of_init(node, parent, NR_SAMA5D4_IRQS);
> }
> IRQCHIP_DECLARE(sama5d4_aic5, "atmel,sama5d4-aic", sama5d4_aic5_of_init);
> +
> +#define NR_SAM9X60_IRQS 50
> +
> +static int __init sam9x60_aic5_of_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + return aic5_of_init(node, parent, NR_SAM9X60_IRQS);
> +}
> +IRQCHIP_DECLARE(sam9x60_aic5, "microchip,sam9x60-aic", sam9x60_aic5_of_init);
> --
> 2.7.4
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next prev parent reply other threads:[~2019-09-10 15:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-09 11:00 [PATCH] irqchip/atmel-aic5: add support for sam9x60 irqchip Claudiu Beznea
2019-09-10 15:15 ` Alexandre Belloni [this message]
2019-09-13 14:36 ` Rob Herring
2019-10-14 18:38 ` [tip: irq/urgent] irqchip/atmel-aic5: Add " tip-bot2 for Sandeep Sheriker Mallikarjun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190910151513.GY21254@piout.net \
--to=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=mark.rutland@arm.com \
--cc=maz@kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
--cc=sandeepsheriker.mallikarjun@microchip.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).